From d828d203fcdc9f6839330e1007a331f740224ab8 Mon Sep 17 00:00:00 2001 From: Greg Davill Date: Tue, 22 Mar 2022 23:29:09 +1030 Subject: Skip freertos for ch32v307 --- examples/device/cdc_msc_freertos/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 1 + 2 files changed, 2 insertions(+) (limited to 'examples/device') diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index 7137b78af..edb8a34aa 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -6,5 +6,6 @@ mcu:MKL25ZXX mcu:RP2040 mcu:SAMX7X mcu:GD32VF103 +mcu:CH32V307 family:broadcom_64bit family:broadcom_32bit \ No newline at end of file diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index e64187fd4..b12de1a90 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -5,5 +5,6 @@ mcu:VALENTYUSB_EPTRI mcu:RP2040 mcu:SAMX7X mcu:GD32VF103 +mcu:CH32V307 family:broadcom_64bit family:broadcom_32bit \ No newline at end of file -- cgit v1.3.1 From 2a17a7e8f851c1a29d7e06ff520d15f36b7a652c Mon Sep 17 00:00:00 2001 From: Rafael Silva Date: Wed, 9 Mar 2022 12:14:55 +0000 Subject: rework make freertos port handling this allows ports to specify a freertos port outside the FreeRTOS-Kernel lib directory, which would otherwise not be possible Signed-off-by: Rafael Silva --- examples/device/cdc_msc_freertos/Makefile | 7 ++++--- examples/device/hid_composite_freertos/Makefile | 7 ++++--- hw/bsp/d5035_01/board.mk | 2 +- hw/bsp/da14695_dk_usb/board.mk | 2 +- hw/bsp/da1469x_dk_pro/board.mk | 2 +- hw/bsp/ea4088qs/board.mk | 2 +- hw/bsp/ea4357/board.mk | 2 +- hw/bsp/fomu/family.mk | 2 +- hw/bsp/frdm_k32l2b/board.mk | 2 +- hw/bsp/frdm_kl25z/board.mk | 2 +- hw/bsp/gd32vf103/family.mk | 2 +- hw/bsp/imxrt/family.mk | 2 +- hw/bsp/kuiic/board.mk | 2 +- hw/bsp/lpc15/family.mk | 2 +- hw/bsp/lpc18/family.mk | 2 +- hw/bsp/lpc54/family.mk | 2 +- hw/bsp/lpc55/family.mk | 2 +- hw/bsp/lpcxpresso11u37/board.mk | 2 +- hw/bsp/lpcxpresso11u68/board.mk | 2 +- hw/bsp/lpcxpresso1347/board.mk | 2 +- hw/bsp/lpcxpresso1769/board.mk | 2 +- hw/bsp/lpcxpresso51u68/board.mk | 2 +- hw/bsp/mbed1768/board.mk | 2 +- hw/bsp/mm32/family.mk | 2 +- hw/bsp/msp432e4/family.mk | 2 +- hw/bsp/ngx4330/board.mk | 2 +- hw/bsp/nrf/family.mk | 2 +- hw/bsp/nutiny_nuc121s/board.mk | 2 +- hw/bsp/nutiny_nuc125s/board.mk | 2 +- hw/bsp/nutiny_nuc126v/board.mk | 2 +- hw/bsp/nutiny_sdk_nuc120/board.mk | 2 +- hw/bsp/nutiny_sdk_nuc505/board.mk | 2 +- hw/bsp/rx/boards/gr_citrus/board.mk | 2 +- hw/bsp/rx/boards/rx65n_target/board.mk | 2 +- hw/bsp/samd11/family.mk | 2 +- hw/bsp/samd21/family.mk | 2 +- hw/bsp/samd51/family.mk | 2 +- hw/bsp/same54xplainedpro/board.mk | 2 +- hw/bsp/same70_qmtech/board.mk | 2 +- hw/bsp/same70_xplained/board.mk | 2 +- hw/bsp/samg55xplained/board.mk | 2 +- hw/bsp/saml2x/family.mk | 2 +- hw/bsp/sltb009a/board.mk | 2 +- hw/bsp/stm32f0/family.mk | 2 +- hw/bsp/stm32f1/family.mk | 2 +- hw/bsp/stm32f207nucleo/board.mk | 2 +- hw/bsp/stm32f303disco/board.mk | 2 +- hw/bsp/stm32f4/family.mk | 2 +- hw/bsp/stm32f7/family.mk | 2 +- hw/bsp/stm32g4/family.mk | 2 +- hw/bsp/stm32h7/family.mk | 2 +- hw/bsp/stm32l0538disco/board.mk | 2 +- hw/bsp/stm32l4/family.mk | 2 +- hw/bsp/stm32wb/family.mk | 2 +- hw/bsp/tm4c123/family.mk | 2 +- hw/bsp/xmc4000/family.mk | 2 +- 56 files changed, 62 insertions(+), 60 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index a155d6cb7..368bc8cfa 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -4,14 +4,15 @@ include ../../../tools/top.mk include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORT_PATH = lib/FreeRTOS-Kernel/portable/GCC INC += \ src \ src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT) - + $(TOP)/$(FREERTOS_PORT) + # Example source EXAMPLE_SOURCE = \ src/freertos_hook.c \ @@ -27,7 +28,7 @@ SRC_C += \ $(FREERTOS_SRC)/queue.c \ $(FREERTOS_SRC)/tasks.c \ $(FREERTOS_SRC)/timers.c \ - $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.c)) # Suppress FreeRTOS warnings CFLAGS += -Wno-error=cast-qual diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index c9b7abdf5..f2e0210ae 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -4,20 +4,21 @@ include ../../../tools/top.mk include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORT_PATH = lib/FreeRTOS-Kernel/portable/GCC INC += \ src \ src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT) + $(TOP)/$(FREERTOS_PORT) # Example source EXAMPLE_SOURCE = \ src/freertos_hook.c \ src/main.c \ src/usb_descriptors.c - + SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) # FreeRTOS source, all files in port folder @@ -26,7 +27,7 @@ SRC_C += \ $(FREERTOS_SRC)/queue.c \ $(FREERTOS_SRC)/tasks.c \ $(FREERTOS_SRC)/timers.c \ - $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.c)) # Suppress FreeRTOS warnings CFLAGS += -Wno-error=cast-qual diff --git a/hw/bsp/d5035_01/board.mk b/hw/bsp/d5035_01/board.mk index b7796b9d8..cefd8c935 100644 --- a/hw/bsp/d5035_01/board.mk +++ b/hw/bsp/d5035_01/board.mk @@ -52,7 +52,7 @@ INC += \ $(TOP)/hw/mcu/microchip/same51/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = ATSAME51J19 diff --git a/hw/bsp/da14695_dk_usb/board.mk b/hw/bsp/da14695_dk_usb/board.mk index e969c79c2..2ca7f8529 100644 --- a/hw/bsp/da14695_dk_usb/board.mk +++ b/hw/bsp/da14695_dk_usb/board.mk @@ -31,7 +31,7 @@ INC += \ $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include # For freeRTOS port source -FREERTOS_PORT = ARM_CM33_NTZ/non_secure +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM33_NTZ/non_secure # For flash-jlink target JLINK_DEVICE = DA14695 diff --git a/hw/bsp/da1469x_dk_pro/board.mk b/hw/bsp/da1469x_dk_pro/board.mk index 980fc422f..d9dd5cd65 100644 --- a/hw/bsp/da1469x_dk_pro/board.mk +++ b/hw/bsp/da1469x_dk_pro/board.mk @@ -31,7 +31,7 @@ INC += \ $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include # For freeRTOS port source -FREERTOS_PORT = ARM_CM33_NTZ/non_secure +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM33_NTZ/non_secure # For flash-jlink target JLINK_DEVICE = DA14699 diff --git a/hw/bsp/ea4088qs/board.mk b/hw/bsp/ea4088qs/board.mk index b325dfeb4..54195b20c 100644 --- a/hw/bsp/ea4088qs/board.mk +++ b/hw/bsp/ea4088qs/board.mk @@ -37,7 +37,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = LPC4088 diff --git a/hw/bsp/ea4357/board.mk b/hw/bsp/ea4357/board.mk index 6f243c6a2..4556e98f6 100644 --- a/hw/bsp/ea4357/board.mk +++ b/hw/bsp/ea4357/board.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc/config_43xx # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = LPC4357_M4 diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index 165535c6b..8f8f3d011 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -19,7 +19,7 @@ INC += \ $(TOP)/$(FAMILY_PATH)/include # For freeRTOS port source -FREERTOS_PORT = RISC-V +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RISC-V # flash using dfu-util $(BUILD)/$(PROJECT).dfu: $(BUILD)/$(PROJECT).bin diff --git a/hw/bsp/frdm_k32l2b/board.mk b/hw/bsp/frdm_k32l2b/board.mk index 56df553da..407e5805d 100644 --- a/hw/bsp/frdm_k32l2b/board.mk +++ b/hw/bsp/frdm_k32l2b/board.mk @@ -39,7 +39,7 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = MKL25Z128xxx4 diff --git a/hw/bsp/frdm_kl25z/board.mk b/hw/bsp/frdm_kl25z/board.mk index 3585b8b03..0a2ddad9f 100644 --- a/hw/bsp/frdm_kl25z/board.mk +++ b/hw/bsp/frdm_kl25z/board.mk @@ -40,7 +40,7 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_MKL25Z4.S # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = MKL25Z128xxx4 diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 49bacdf1b..c0c144f5c 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -57,7 +57,7 @@ INC += \ $(TOP)/$(GD32VF103_SDK_SOC)/Common/Include/Usb # For freeRTOS port source -FREERTOS_PORT = RISC-V +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RISC-V # For flash-jlink target JLINK_IF = jtag diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index 0bf4a0d15..850e54202 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -59,5 +59,5 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S # For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7/r0p1 diff --git a/hw/bsp/kuiic/board.mk b/hw/bsp/kuiic/board.mk index 39e9d9deb..94646dbde 100644 --- a/hw/bsp/kuiic/board.mk +++ b/hw/bsp/kuiic/board.mk @@ -40,7 +40,7 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = MKL25Z128xxx4 diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk index c7dd3f8be..fee0e0106 100644 --- a/hw/bsp/lpc15/family.mk +++ b/hw/bsp/lpc15/family.mk @@ -36,4 +36,4 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index 7aa36abc4..8ba05c9c9 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -34,4 +34,4 @@ INC += \ $(TOP)/$(MCU_DIR)/inc/config_18xx # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index 600df6fd0..3c1059eff 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -51,4 +51,4 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index 4e8d65ce9..94e7fea41 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -64,4 +64,4 @@ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a # For freeRTOS port source -FREERTOS_PORT = ARM_CM33_NTZ/non_secure +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM33_NTZ/non_secure diff --git a/hw/bsp/lpcxpresso11u37/board.mk b/hw/bsp/lpcxpresso11u37/board.mk index b736eebe1..97ac6c01a 100644 --- a/hw/bsp/lpcxpresso11u37/board.mk +++ b/hw/bsp/lpcxpresso11u37/board.mk @@ -36,7 +36,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = LPC11U37/401 diff --git a/hw/bsp/lpcxpresso11u68/board.mk b/hw/bsp/lpcxpresso11u68/board.mk index 922414f82..9647b8b8f 100644 --- a/hw/bsp/lpcxpresso11u68/board.mk +++ b/hw/bsp/lpcxpresso11u68/board.mk @@ -32,7 +32,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = LPC11U68 diff --git a/hw/bsp/lpcxpresso1347/board.mk b/hw/bsp/lpcxpresso1347/board.mk index 62135c274..38679a66f 100644 --- a/hw/bsp/lpcxpresso1347/board.mk +++ b/hw/bsp/lpcxpresso1347/board.mk @@ -36,7 +36,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = LPC1347 diff --git a/hw/bsp/lpcxpresso1769/board.mk b/hw/bsp/lpcxpresso1769/board.mk index 34b4d6dc0..ecafccc49 100644 --- a/hw/bsp/lpcxpresso1769/board.mk +++ b/hw/bsp/lpcxpresso1769/board.mk @@ -34,7 +34,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = LPC1769 diff --git a/hw/bsp/lpcxpresso51u68/board.mk b/hw/bsp/lpcxpresso51u68/board.mk index 98bef6758..6e39bbcad 100644 --- a/hw/bsp/lpcxpresso51u68/board.mk +++ b/hw/bsp/lpcxpresso51u68/board.mk @@ -43,7 +43,7 @@ SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 JLINK_DEVICE = LPC51U68 PYOCD_TARGET = LPC51U68 diff --git a/hw/bsp/mbed1768/board.mk b/hw/bsp/mbed1768/board.mk index b0d885866..a65d6eacb 100644 --- a/hw/bsp/mbed1768/board.mk +++ b/hw/bsp/mbed1768/board.mk @@ -34,7 +34,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = LPC1768 diff --git a/hw/bsp/mm32/family.mk b/hw/bsp/mm32/family.mk index 1a9f51191..c1147b4e9 100644 --- a/hw/bsp/mm32/family.mk +++ b/hw/bsp/mm32/family.mk @@ -30,7 +30,7 @@ INC += \ $(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 # flash target using on-board flash: flash-jlink diff --git a/hw/bsp/msp432e4/family.mk b/hw/bsp/msp432e4/family.mk index e3cb90abc..7f823b1aa 100644 --- a/hw/bsp/msp432e4/family.mk +++ b/hw/bsp/msp432e4/family.mk @@ -34,7 +34,7 @@ INC += \ SRC_S += $(MCU_DIR)/Source/startup_msp432e411y_gcc.S # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = MSP432E401Y diff --git a/hw/bsp/ngx4330/board.mk b/hw/bsp/ngx4330/board.mk index 3e901567c..26f8ae760 100644 --- a/hw/bsp/ngx4330/board.mk +++ b/hw/bsp/ngx4330/board.mk @@ -37,7 +37,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc/config_43xx # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = LPC4330 diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index d8283a9e6..c79d7e654 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -42,7 +42,7 @@ SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S ASFLAGS += -D__HEAP_SIZE=0 # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = $(MCU_VARIANT)_xxaa diff --git a/hw/bsp/nutiny_nuc121s/board.mk b/hw/bsp/nutiny_nuc121s/board.mk index ff1d5aa3a..da0226afe 100644 --- a/hw/bsp/nutiny_nuc121s/board.mk +++ b/hw/bsp/nutiny_nuc121s/board.mk @@ -32,7 +32,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC121SC2AE diff --git a/hw/bsp/nutiny_nuc125s/board.mk b/hw/bsp/nutiny_nuc125s/board.mk index bb56e42ab..32cb56df1 100644 --- a/hw/bsp/nutiny_nuc125s/board.mk +++ b/hw/bsp/nutiny_nuc125s/board.mk @@ -28,7 +28,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC125SC2AE diff --git a/hw/bsp/nutiny_nuc126v/board.mk b/hw/bsp/nutiny_nuc126v/board.mk index 4f0ebf201..d24fdb6e2 100644 --- a/hw/bsp/nutiny_nuc126v/board.mk +++ b/hw/bsp/nutiny_nuc126v/board.mk @@ -34,7 +34,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc126/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC126VG4AE diff --git a/hw/bsp/nutiny_sdk_nuc120/board.mk b/hw/bsp/nutiny_sdk_nuc120/board.mk index 4d7aac7f5..b06d4873e 100644 --- a/hw/bsp/nutiny_sdk_nuc120/board.mk +++ b/hw/bsp/nutiny_sdk_nuc120/board.mk @@ -30,7 +30,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc100_120/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC120LE3 diff --git a/hw/bsp/nutiny_sdk_nuc505/board.mk b/hw/bsp/nutiny_sdk_nuc505/board.mk index e8514347e..357cdec51 100644 --- a/hw/bsp/nutiny_sdk_nuc505/board.mk +++ b/hw/bsp/nutiny_sdk_nuc505/board.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc505/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = NUC505YO13Y diff --git a/hw/bsp/rx/boards/gr_citrus/board.mk b/hw/bsp/rx/boards/gr_citrus/board.mk index 0eba94610..4f2770725 100644 --- a/hw/bsp/rx/boards/gr_citrus/board.mk +++ b/hw/bsp/rx/boards/gr_citrus/board.mk @@ -11,7 +11,7 @@ MCU_DIR = hw/mcu/renesas/rx/rx63n LD_FILE = $(BOARD_PATH)/r5f5631fd.ld # For freeRTOS port source -FREERTOS_PORT = RX600 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RX600 # For flash-jlink target JLINK_DEVICE = R5F5631F diff --git a/hw/bsp/rx/boards/rx65n_target/board.mk b/hw/bsp/rx/boards/rx65n_target/board.mk index fc76d79fa..18c7d354d 100644 --- a/hw/bsp/rx/boards/rx65n_target/board.mk +++ b/hw/bsp/rx/boards/rx65n_target/board.mk @@ -12,7 +12,7 @@ MCU_DIR = hw/mcu/renesas/rx/rx65n LD_FILE = $(BOARD_PATH)/r5f565ne.ld # For freeRTOS port source -FREERTOS_PORT = RX600 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RX600 # For flash-jlink target JLINK_DEVICE = R5F565NE diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index ae55be75b..fcc163c02 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -37,4 +37,4 @@ INC += \ $(TOP)/hw/mcu/microchip/samd11/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 208f23789..a4935e442 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -37,7 +37,7 @@ INC += \ $(TOP)/hw/mcu/microchip/samd21/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk index 783bed82a..aa3af5318 100644 --- a/hw/bsp/samd51/family.mk +++ b/hw/bsp/samd51/family.mk @@ -38,7 +38,7 @@ INC += \ $(TOP)/hw/mcu/microchip/samd51/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ diff --git a/hw/bsp/same54xplainedpro/board.mk b/hw/bsp/same54xplainedpro/board.mk index 2d0d928ff..7d7ede0f0 100644 --- a/hw/bsp/same54xplainedpro/board.mk +++ b/hw/bsp/same54xplainedpro/board.mk @@ -38,7 +38,7 @@ INC += \ $(TOP)/hw/mcu/microchip/same54/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = ATSAME54P20 diff --git a/hw/bsp/same70_qmtech/board.mk b/hw/bsp/same70_qmtech/board.mk index ba7088e44..5f53004ed 100644 --- a/hw/bsp/same70_qmtech/board.mk +++ b/hw/bsp/same70_qmtech/board.mk @@ -44,7 +44,7 @@ INC += \ $(TOP)/$(ASF_DIR)/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM7 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7 # For flash-jlink target JLINK_DEVICE = SAME70N19B diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk index cb2decf50..138e27b44 100644 --- a/hw/bsp/same70_xplained/board.mk +++ b/hw/bsp/same70_xplained/board.mk @@ -44,7 +44,7 @@ INC += \ $(TOP)/$(ASF_DIR)/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM7 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7 # For flash-jlink target JLINK_DEVICE = SAME70Q21B diff --git a/hw/bsp/samg55xplained/board.mk b/hw/bsp/samg55xplained/board.mk index deff6944c..1d228239e 100644 --- a/hw/bsp/samg55xplained/board.mk +++ b/hw/bsp/samg55xplained/board.mk @@ -42,7 +42,7 @@ INC += \ $(TOP)/$(ASF_DIR)/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = ATSAMG55J19 diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index bb1faeb7f..958b271ad 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ diff --git a/hw/bsp/sltb009a/board.mk b/hw/bsp/sltb009a/board.mk index f5c240ca2..a5011cce2 100644 --- a/hw/bsp/sltb009a/board.mk +++ b/hw/bsp/sltb009a/board.mk @@ -35,7 +35,7 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = EFM32GG12B810F1024 diff --git a/hw/bsp/stm32f0/family.mk b/hw/bsp/stm32f0/family.mk index 39831e154..75d14d22c 100644 --- a/hw/bsp/stm32f0/family.mk +++ b/hw/bsp/stm32f0/family.mk @@ -37,4 +37,4 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk index 3fb2e6e70..a9c6f4ec4 100644 --- a/hw/bsp/stm32f1/family.mk +++ b/hw/bsp/stm32f1/family.mk @@ -35,7 +35,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = stm32f103c8 diff --git a/hw/bsp/stm32f207nucleo/board.mk b/hw/bsp/stm32f207nucleo/board.mk index fa7d28399..f418c6c04 100644 --- a/hw/bsp/stm32f207nucleo/board.mk +++ b/hw/bsp/stm32f207nucleo/board.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = ARM_CM3 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = stm32f207zg diff --git a/hw/bsp/stm32f303disco/board.mk b/hw/bsp/stm32f303disco/board.mk index 9dd27a857..371aba0f3 100644 --- a/hw/bsp/stm32f303disco/board.mk +++ b/hw/bsp/stm32f303disco/board.mk @@ -40,7 +40,7 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = stm32f303vc diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index 9811d3371..48cf1427b 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -37,7 +37,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index 8482e6dd2..59e421180 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -51,4 +51,4 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7/r0p1 diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk index 04222f3bb..72993bc66 100644 --- a/hw/bsp/stm32g4/family.mk +++ b/hw/bsp/stm32g4/family.mk @@ -38,7 +38,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index 096d04d0c..d2dda3c1b 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -53,5 +53,5 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7/r0p1 diff --git a/hw/bsp/stm32l0538disco/board.mk b/hw/bsp/stm32l0538disco/board.mk index e19101d64..434c94ef2 100644 --- a/hw/bsp/stm32l0538disco/board.mk +++ b/hw/bsp/stm32l0538disco/board.mk @@ -41,7 +41,7 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = STM32L053R8 diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk index d6f55e5f9..59d214673 100644 --- a/hw/bsp/stm32l4/family.mk +++ b/hw/bsp/stm32l4/family.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/$(BOARD_PATH) # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index f85c5badd..66f8ff4e2 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -38,7 +38,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/tm4c123/family.mk b/hw/bsp/tm4c123/family.mk index 751076196..73b65f00c 100644 --- a/hw/bsp/tm4c123/family.mk +++ b/hw/bsp/tm4c123/family.mk @@ -33,4 +33,4 @@ SRC_C += \ $(MCU_DIR)/Source/GCC/tm4c123_startup.c # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F diff --git a/hw/bsp/xmc4000/family.mk b/hw/bsp/xmc4000/family.mk index 0b32bdeb5..134098dac 100644 --- a/hw/bsp/xmc4000/family.mk +++ b/hw/bsp/xmc4000/family.mk @@ -37,4 +37,4 @@ INC += \ $(TOP)/$(MCU_DIR)/XMCLib/inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM4F +FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F -- cgit v1.3.1 From e80714740ceec841ff4964fe555870cf3ee4f6df Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Tue, 12 Oct 2021 23:29:58 +0900 Subject: Change images to MJPEG --- examples/device/video_capture/src/images.h | 282 +++++++++++++++++++++ examples/device/video_capture/src/main.c | 21 +- .../device/video_capture/src/usb_descriptors.h | 10 +- src/class/video/video.h | 79 ++++++ src/class/video/video_device.c | 175 +++++++++++-- 5 files changed, 536 insertions(+), 31 deletions(-) (limited to 'examples/device') diff --git a/examples/device/video_capture/src/images.h b/examples/device/video_capture/src/images.h index 1b13cfe81..33beff662 100644 --- a/examples/device/video_capture/src/images.h +++ b/examples/device/video_capture/src/images.h @@ -1649,3 +1649,285 @@ static const unsigned char frame_buffer[128 * (96 + 1) * 2] = { 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, }; + +#define color_bar_0_jpg_len 511 +#define color_bar_1_jpg_len 512 +#define color_bar_2_jpg_len 511 +#define color_bar_3_jpg_len 511 +#define color_bar_4_jpg_len 511 +#define color_bar_5_jpg_len 512 +#define color_bar_6_jpg_len 511 +#define color_bar_7_jpg_len 511 + +unsigned char color_bar_0_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x92, 0x8a, 0x00, + 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, + 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, + 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, + 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, + 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, + 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, + 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, + 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, + 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, + 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, + 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, + 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, + 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, + 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, + 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, + 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, + 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, + 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, + 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, + 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, + 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0xff, 0xd9 +}; +unsigned char color_bar_1_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x7d, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, + 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, + 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, + 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, + 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, + 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, + 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, + 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, + 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, + 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, + 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, + 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, + 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, + 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, + 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, + 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x7f, 0xff, 0xd9 +}; +unsigned char color_bar_2_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x75, 0x14, 0xcc, + 0xc4, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, + 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, + 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, + 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, + 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, + 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, + 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, + 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, + 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, + 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, + 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, + 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, + 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, + 0x40, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, + 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x18, 0xda, 0x2b, 0x63, 0x61, 0x28, 0xac, 0xc6, 0x25, + 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x2c, 0x51, 0x40, 0x09, 0x45, 0x66, 0x33, 0xff, 0xd9 +}; +unsigned char color_bar_3_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x5a, 0x2a, 0x08, + 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, + 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, + 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, + 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, + 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, + 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, + 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, + 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, + 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, + 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, + 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, + 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, + 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, + 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, + 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, + 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, + 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, + 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, + 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, + 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, + 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x91, 0xff, 0xd9 +}; +unsigned char color_bar_4_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x4a, 0x2a, 0xcb, + 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, + 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, + 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, + 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, + 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, + 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, + 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, + 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, + 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, + 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, + 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, + 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, + 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, + 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, + 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, + 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, + 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, + 0xc8, 0x4a, 0x2b, 0x31, 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, + 0x45, 0x66, 0x32, 0xc5, 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, + 0x8d, 0xa2, 0xb6, 0x36, 0x12, 0x8a, 0xcc, 0x62, 0x51, 0x5a, 0x99, 0x09, 0x45, 0x66, 0x32, 0xc5, + 0x14, 0x00, 0x94, 0x56, 0x63, 0x12, 0x8a, 0xd4, 0xc8, 0x4a, 0x2b, 0x31, 0x9f, 0xff, 0xd9 +}; +unsigned char color_bar_5_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x6d, 0x14, 0x8d, + 0x04, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, + 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, + 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, + 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, + 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, + 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, + 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, + 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, + 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, + 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, + 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, + 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, + 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, + 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, + 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, + 0x8a, 0x28, 0x01, 0x28, 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, + 0x6c, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x65, 0x8a, 0x28, 0x01, 0x28, + 0xac, 0xc6, 0x25, 0x15, 0xa9, 0x90, 0x94, 0x56, 0x63, 0x1b, 0x45, 0x6c, 0x6c, 0x7f, 0xff, 0xd9 +}; +unsigned char color_bar_6_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x65, 0x15, 0xa0, + 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, + 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, + 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, + 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, + 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, + 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, + 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, + 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, + 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, + 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, + 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, + 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, + 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, + 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, + 0x1b, 0x09, 0x45, 0x66, 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, + 0x2b, 0x31, 0x89, 0x45, 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, + 0x31, 0x28, 0xad, 0x4c, 0x84, 0xa2, 0xb3, 0x19, 0x62, 0x8a, 0x00, 0x4a, 0x2b, 0x31, 0x89, 0x45, + 0x6a, 0x64, 0x25, 0x15, 0x98, 0xc6, 0xd1, 0x5b, 0x1b, 0x09, 0x45, 0x66, 0x33, 0xff, 0xd9 +}; +unsigned char color_bar_7_jpg[] = { + 0xff, 0xd8, 0xff, 0xdb, 0x00, 0x43, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xdb, 0x00, 0x43, 0x01, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x00, 0x11, + 0x08, 0x00, 0x60, 0x00, 0x80, 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, + 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00, 0x8e, 0x8a, 0x00, + 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, + 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, + 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, + 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, + 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, + 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, + 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, + 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, + 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, + 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, + 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, + 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, + 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, + 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, + 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, + 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, + 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, + 0x18, 0x94, 0x56, 0xa6, 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, + 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, + 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, + 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x47, 0xff, 0xd9 +}; diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 4028352da..362b168d4 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -110,8 +110,21 @@ static unsigned tx_busy = 0; static unsigned interval_ms = 1000 / FRAME_RATE; /* YUY2 frame buffer */ -#ifdef CFG_EXAMPLE_VIDEO_READONLY +#if 1 #include "images.h" +static struct { + uint32_t size; + uint8_t const *buffer; +} const frames[] = { + {color_bar_0_jpg_len, color_bar_0_jpg}, + {color_bar_1_jpg_len, color_bar_1_jpg}, + {color_bar_2_jpg_len, color_bar_2_jpg}, + {color_bar_3_jpg_len, color_bar_3_jpg}, + {color_bar_4_jpg_len, color_bar_4_jpg}, + {color_bar_5_jpg_len, color_bar_5_jpg}, + {color_bar_6_jpg_len, color_bar_6_jpg}, + {color_bar_7_jpg_len, color_bar_7_jpg}, +}; #else static uint8_t frame_buffer[FRAME_WIDTH * FRAME_HEIGHT * 16 / 8]; static void fill_color_bar(uint8_t *buffer, unsigned start_position) @@ -168,8 +181,7 @@ void video_task(void) already_sent = 1; start_ms = board_millis(); #ifdef CFG_EXAMPLE_VIDEO_READONLY - tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t) &frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], - FRAME_WIDTH * FRAME_HEIGHT * 16/8); + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frames[frame_num % 8].buffer, frames[frame_num % 8].size); #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); @@ -182,8 +194,7 @@ void video_task(void) start_ms += interval_ms; #ifdef CFG_EXAMPLE_VIDEO_READONLY - tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t) &frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], - FRAME_WIDTH * FRAME_HEIGHT * 16/8); + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frames[frame_num % 8].buffer, frames[frame_num % 8].size); #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h index 90537aa06..aa937e168 100644 --- a/examples/device/video_capture/src/usb_descriptors.h +++ b/examples/device/video_capture/src/usb_descriptors.h @@ -90,17 +90,17 @@ enum { /* Video stream header for without still image capture */ \ TUD_VIDEO_DESC_CS_VS_INPUT( /*bNumFormats*/1, \ /*wTotalLength - bLength */\ - TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR_LEN\ - + TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT_LEN\ + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN\ + + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN\ + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN,\ _epin, /*bmInfo*/0, /*bTerminalLink*/UVC_ENTITY_CAP_OUTPUT_TERMINAL, \ /*bStillCaptureMethod*/0, /*bTriggerSupport*/0, /*bTriggerUsage*/0, \ /*bmaControls(1)*/0), \ /* Video stream format */ \ - TUD_VIDEO_DESC_CS_VS_FMT_YUY2(/*bFormatIndex*/1, /*bNumFrameDescriptors*/1, \ - /*bDefaultFrameIndex*/1, 0, 0, 0, /*bCopyProtect*/0), \ + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG(/*bFormatIndex*/1, /*bNumFrameDescriptors*/1, \ + 1, /*bDefaultFrameIndex*/1, 0, 0, 0, /*bCopyProtect*/0), \ /* Video stream frame format */ \ - TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT(/*bFrameIndex */1, 0, _width, _height, \ + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT(/*bFrameIndex */1, 0, _width, _height, \ _width * _height * 16, _width * _height * 16 * _fps, \ _width * _height * 16, \ (10000000/_fps), (10000000/_fps), (10000000/_fps)*_fps, (10000000/_fps)), \ diff --git a/src/class/video/video.h b/src/class/video/video.h index 844746546..e8227ea60 100644 --- a/src/class/video/video.h +++ b/src/class/video/video.h @@ -302,6 +302,45 @@ typedef struct TU_ATTR_PACKED { uint8_t bCopyProtect; } tusb_desc_cs_video_fmt_uncompressed_t; +typedef struct TU_ATTR_PACKED { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubType; + uint8_t bFormatIndex; + uint8_t bNumFrameDescriptors; + uint8_t bmFlags; + uint8_t bDefaultFrameIndex; + uint8_t bAspectRatioX; + uint8_t bAspectRatioY; + uint8_t bmInterlaceFlags; + uint8_t bCopyProtect; +} tusb_desc_cs_video_fmt_mjpeg_t; + +typedef struct TU_ATTR_PACKED { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubType; + uint8_t bFormatIndex; + uint32_t dwMaxVideoFrameBufferSize; /* deprecated */ + uint8_t bFormatType; +} tusb_desc_cs_video_fmt_dv_t; + +typedef struct TU_ATTR_PACKED { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubType; + uint8_t bFormatIndex; + uint8_t bNumFrameDescriptors; + uint8_t guidFormat[16]; + uint8_t bBitsPerPixel; + uint8_t bDefaultFrameIndex; + uint8_t bAspectRatioX; + uint8_t bAspectRatioY; + uint8_t bmInterlaceFlags; + uint8_t bCopyProtect; + uint8_t bVaribaleSize; +} tusb_desc_cs_video_fmt_frame_based_t; + typedef struct TU_ATTR_PACKED { uint8_t bLength; uint8_t bDescriptorType; @@ -318,6 +357,24 @@ typedef struct TU_ATTR_PACKED { uint32_t dwFrameInterval[]; } tusb_desc_cs_video_frm_uncompressed_t; +typedef tusb_desc_cs_video_frm_uncompressed_t tusb_desc_cs_video_frm_mjpeg_t; + +typedef struct TU_ATTR_PACKED { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubType; + uint8_t bFrameIndex; + uint8_t bmCapabilities; + uint16_t wWidth; + uint16_t wHeight; + uint32_t dwMinBitRate; + uint32_t dwMaxBitRate; + uint32_t dwDefaultFrameInterval; + uint8_t bFrameIntervalType; + uint32_t dwBytesPerLine; + uint32_t dwFrameInterval[]; +} tusb_desc_cs_video_frm_frame_based_t; + //--------------------------------------------------------------------+ // Requests //--------------------------------------------------------------------+ @@ -378,8 +435,11 @@ TU_VERIFY_STATIC( sizeof(video_probe_and_commit_control_t) == 48, "size is not c #define TUD_VIDEO_DESC_CS_VS_IN_LEN 13 #define TUD_VIDEO_DESC_CS_VS_OUT_LEN 9 #define TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR_LEN 27 +#define TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN 11 #define TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT_LEN 38 #define TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_DISC_LEN 26 +#define TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN 38 +#define TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_DISC_LEN 26 #define TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN 6 /* 2.2 compression formats */ @@ -462,6 +522,25 @@ TU_VERIFY_STATIC( sizeof(video_probe_and_commit_control_t) == 48, "size is not c _frmidx, _cap, U16_TO_U8S_LE(_width), U16_TO_U8S_LE(_height), U32_TO_U8S_LE(_minbr), U32_TO_U8S_LE(_maxbr), \ U32_TO_U8S_LE(_maxfrmbufsz), U32_TO_U8S_LE(_frminterval), (TU_ARGS_NUM(__VA_ARGS__)), __VA_ARGS__ +/* Motion-JPEG 3.1.1 Table 3-1 */ +#define TUD_VIDEO_DESC_CS_VS_FMT_MJPEG(_fmtidx, _numfrmdesc, _fixed_sz, _frmidx, _asrx, _asry, _interlace, _cp) \ + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN, TUSB_DESC_CS_INTERFACE, VIDEO_CS_ITF_VS_FORMAT_MJPEG, \ + _fmtidx, _numfrmdesc, _fixed_sz, _frmidx, _asrx, _asry, _interlace, _cp + +/* Motion-JPEG 3.1.1 Table 3-2 and 3-3 */ +#define TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT(_frmidx, _cap, _width, _height, _minbr, _maxbr, _maxfrmbufsz, _frminterval, _minfrminterval, _maxfrminterval, _frmintervalstep) \ + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN, TUSB_DESC_CS_INTERFACE, VIDEO_CS_ITF_VS_FRAME_MJPEG, \ + _frmidx, _cap, U16_TO_U8S_LE(_width), U16_TO_U8S_LE(_height), U32_TO_U8S_LE(_minbr), U32_TO_U8S_LE(_maxbr), \ + U32_TO_U8S_LE(_maxfrmbufsz), U32_TO_U8S_LE(_frminterval), 0, \ + U32_TO_U8S_LE(_minfrminterval), U32_TO_U8S_LE(_maxfrminterval), U32_TO_U8S_LE(_frmintervalstep) + +/* Motion-JPEG 3.1.1 Table 3-2 and 3-4 */ +#define TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_DISC(_frmidx, _cap, _width, _height, _minbr, _maxbr, _maxfrmbufsz, _frminterval, ...) \ + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_DISC_LEN + (TU_ARGS_NUM(__VA_ARGS__)) * 4, \ + TUSB_DESC_CS_INTERFACE, VIDEO_CS_VS_INTERFACE_FRAME_MJPEG, \ + _frmidx, _cap, U16_TO_U8S_LE(_width), U16_TO_U8S_LE(_height), U32_TO_U8S_LE(_minbr), U32_TO_U8S_LE(_maxbr), \ + U32_TO_U8S_LE(_maxfrmbufsz), U32_TO_U8S_LE(_frminterval), (TU_ARGS_NUM(__VA_ARGS__)), __VA_ARGS__ + /* 3.9.2.6 */ #define TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING(_color, _trns, _mat) \ TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN, \ diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 7636db5fe..39e2e9aac 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -29,6 +29,8 @@ #if (CFG_TUD_ENABLED && CFG_TUD_VIDEO && CFG_TUD_VIDEO_STREAMING) +#include + #include "device/usbd.h" #include "device/usbd_pvt.h" @@ -59,6 +61,30 @@ typedef struct TU_ATTR_PACKED { uint8_t bEntityId; } tusb_desc_cs_video_entity_itf_t; +typedef union { + struct TU_ATTR_PACKED { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubType; + uint8_t bFormatIndex; + }; + tusb_desc_cs_video_fmt_uncompressed_t uncompressed; + tusb_desc_cs_video_fmt_mjpeg_t mjpeg; + tusb_desc_cs_video_fmt_frame_based_t frame_based; +} tusb_desc_cs_video_fmt_t; + +typedef union { + struct TU_ATTR_PACKED { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bDescriptorSubType; + uint8_t bFrameIndex; + }; + tusb_desc_cs_video_frm_uncompressed_t uncompressed; + tusb_desc_cs_video_frm_mjpeg_t mjpeg; + tusb_desc_cs_video_frm_frame_based_t frame_based; +} tusb_desc_cs_video_frm_t; + /* video streaming interface */ typedef struct TU_ATTR_PACKED { uint8_t index_vc; /* index of bound video control interface */ @@ -167,6 +193,72 @@ static void const* _find_desc(void const *beg, void const *end, uint_fast8_t des return cur; } +/** Find the first descriptor of a given types + * + * @param[in] beg The head of descriptor byte array. + * @param[in] end The tail of descriptor byte array. + * @param[in] ... The target descriptor types. The last type must be 0. + * + * @return The pointer for interface descriptor. + * @retval end did not found interface descriptor */ +static void const* _find_desc_n(void const *beg, void const *end, ...) +{ + uint_fast8_t target = 0; + void const *cur; + for (cur = beg; cur < end && !target; cur = tu_desc_next(cur)) { + uint_fast8_t actual = tu_desc_type(cur); + va_list ap; + va_start(ap, end); + do { + target = va_arg(ap, unsigned); + } while (target && target != actual); + va_end(ap); + } + return cur; +} + +/** Find the first descriptor specified by the arguments + * + * @param[in] beg The head of descriptor byte array. + * @param[in] end The tail of descriptor byte array. + * @param[in] sub_types The target bDescriptorSubtype list. The last elemnt must be 0. + * + * @return The pointer for interface descriptor. + * @retval end did not found interface descriptor */ +static void const* _find_desc_cs(void const *beg, void const *end, uint8_t const *sub_types) +{ + uint_fast8_t target = 0; + void const *cur; + for (cur = beg; cur < end && !target; cur = _find_desc(cur, end, TUSB_DESC_CS_INTERFACE)) { + uint_fast8_t actual = ((uint8_t const *)cur)[2]; + uint8_t const *p = sub_types; + do { + target = *p++; + } while (target && target != actual); + } + return cur; +} + +/** Find the first descriptor specified by the arguments + * + * @param[in] beg The head of descriptor byte array. + * @param[in] end The tail of descriptor byte array. + * @param[in] desc_type The target descriptor type + * @param[in] element_0 The target element following the desc_type + * + * @return The pointer for interface descriptor. + * @retval end did not found interface descriptor */ +static void const* _find_desc_2(void const *beg, void const *end, + uint_fast8_t desc_type, uint_fast8_t element_0) +{ + for (void const *cur = beg; cur < end; cur = _find_desc(cur, end, desc_type)) { + uint8_t const *p = (uint8_t const *)cur; + if (p[2] == element_0) return cur; + cur = tu_desc_next(cur); + } + return end; +} + /** Find the first descriptor specified by the arguments * * @param[in] beg The head of descriptor byte array. @@ -235,14 +327,19 @@ static inline void const* _find_desc_itf(void const *beg, void const *end, uint_ * @retval end did not found endpoint descriptor */ static void const* _find_desc_ep(void const *beg, void const *end) { - for (void const *cur = beg; cur < end; cur = tu_desc_next(cur)) { - uint_fast8_t desc_type = tu_desc_type(cur); - if (TUSB_DESC_ENDPOINT == desc_type) return cur; - if (TUSB_DESC_INTERFACE == desc_type) break; - } + void const *cur = _find_desc_n(beg, end, TUSB_DESC_ENDPOINT, TUSB_DESC_INTERFACE, 0); + if ((cur < end) && (TUSB_DESC_ENDPOINT == tu_desc_type(cur))) + return cur; return end; } +/** Return the end of the video control descriptor. */ +static inline void const* _end_of_control_descriptor(void const *desc) +{ + tusb_desc_vc_itf_t const *vc = (tusb_desc_vc_itf_t const *)desc; + return desc + vc->std.bLength + vc->ctl.wTotalLength; +} + /** Find the first entity descriptor with the entity ID * specified by the argument belonging to the current video control descriptor. * @@ -253,10 +350,8 @@ static void const* _find_desc_ep(void const *beg, void const *end) * @retval end did not found interface descriptor */ static void const* _find_desc_entity(void const *desc, uint_fast8_t entityid) { - tusb_desc_vc_itf_t const *vc = (tusb_desc_vc_itf_t const*)desc; - void const *beg = vc; - void const *end = beg + vc->std.bLength + vc->ctl.wTotalLength; - for (void const *cur = beg; cur < end; cur = _find_desc(cur, end, TUSB_DESC_CS_INTERFACE)) { + void const *end = _end_of_control_descriptor(desc); + for (void const *cur = desc; cur < end; cur = _find_desc(cur, end, TUSB_DESC_CS_INTERFACE)) { tusb_desc_cs_video_entity_itf_t const *itf = (tusb_desc_cs_video_entity_itf_t const *)cur; if ((VIDEO_CS_ITF_VC_INPUT_TERMINAL <= itf->bDescriptorSubtype && itf->bDescriptorSubtype < VIDEO_CS_ITF_VC_MAX) @@ -276,17 +371,38 @@ static inline void const* _end_of_streaming_descriptor(void const *desc) } /** Find the first format descriptor with the specified format number. */ -static inline tusb_desc_cs_video_fmt_uncompressed_t const *_find_desc_format(void const *beg, void const *end, uint_fast8_t fmtnum) +static inline void const *_find_desc_format(void const *beg, void const *end, uint_fast8_t fmtnum) { - return (tusb_desc_cs_video_fmt_uncompressed_t const*) - _find_desc_3(beg, end, TUSB_DESC_CS_INTERFACE, VIDEO_CS_ITF_VS_FORMAT_UNCOMPRESSED, fmtnum); + static uint8_t const sub_types[] = { + VIDEO_CS_ITF_VS_FORMAT_UNCOMPRESSED, + VIDEO_CS_ITF_VS_FORMAT_MJPEG, + VIDEO_CS_ITF_VS_FORMAT_DV, + VIDEO_CS_ITF_VS_FORMAT_FRAME_BASED, + 0 + }; + while (true) { + uint8_t const *cur = _find_desc_cs(beg, end, sub_types); + if ((end == cur) || (fmtnum == cur[3])) + return cur; + cur = tu_desc_next(cur); + } } /** Find the first frame descriptor with the specified format number. */ -static inline tusb_desc_cs_video_frm_uncompressed_t const *_find_desc_frame(void const *beg, void const *end, uint_fast8_t frmnum) +static inline void const *_find_desc_frame(void const *beg, void const *end, uint_fast8_t frmnum) { - return (tusb_desc_cs_video_frm_uncompressed_t const*) - _find_desc_3(beg, end, TUSB_DESC_CS_INTERFACE, VIDEO_CS_ITF_VS_FRAME_UNCOMPRESSED, frmnum); + static uint8_t const sub_types[] = { + VIDEO_CS_ITF_VS_FRAME_UNCOMPRESSED, + VIDEO_CS_ITF_VS_FRAME_MJPEG, + VIDEO_CS_ITF_VS_FRAME_FRAME_BASED, + 0 + }; + while (true) { + uint8_t const *cur = _find_desc_cs(beg, end, sub_types); + if ((end == cur) || (frmnum == ((uint8_t const *)cur)[3])) + return cur; + cur = tu_desc_next(cur); + } } /** Set uniquely determined values to variables that have not been set @@ -307,7 +423,6 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm /* Set the parameters determined by the format */ param->wKeyFrameRate = 1; param->wPFrameRate = 0; - param->wCompQuality = 1; /* 1 to 10000 */ param->wCompWindowSize = 1; /* GOP size? */ param->wDelay = 0; /* milliseconds */ param->dwClockFrequency = 27000000; /* same as MPEG-2 system time clock */ @@ -319,8 +434,18 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm param->bBitDepthLuma = 8; void const *end = _end_of_streaming_descriptor(vs); - tusb_desc_cs_video_fmt_uncompressed_t const *fmt = _find_desc_format(tu_desc_next(vs), end, fmtnum); + tusb_desc_cs_video_fmt_t const *fmt = _find_desc_format(tu_desc_next(vs), end, fmtnum); TU_ASSERT(fmt != end); + + switch (fmt->bDescriptorSubtype) { + case VIDEO_CS_ITF_VS_FORMAT_UNCOMPRESSED: + param->wCompQuality = 1; /* 1 to 10000 */ + break; + case VIDEO_CS_ITF_VS_FORMAT_MJPEG; + break; + default: return false; + } + uint_fast8_t frmnum = param->bFrameIndex; TU_ASSERT(frmnum <= fmt->bNumFrameDescriptors); if (!frmnum) { @@ -328,13 +453,21 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm frmnum = 1; param->bFrameIndex = 1; } - tusb_desc_cs_video_frm_uncompressed_t const *frm = _find_desc_frame(tu_desc_next(fmt), end, frmnum); + tusb_desc_cs_video_frm_t const *frm = _find_desc_frame(tu_desc_next(fmt), end, frmnum); TU_ASSERT(frm != end); /* Set the parameters determined by the frame */ uint_fast32_t frame_size = param->dwMaxVideoFrameSize; if (!frame_size) { - frame_size = (uint_fast32_t)frm->wWidth * frm->wHeight * fmt->bBitsPerPixel / 8; + switch (fmt->bDescriptorSubtype) { + case VIDEO_CS_ITF_VS_FORMAT_UNCOMPRESSED: + frame_size = (uint_fast32_t)frm->uncompressed.wWidth * frm->uncompressed.wHeight * fmt->uncompressed.bBitsPerPixel / 8; + break; + case VIDEO_CS_ITF_VS_FORMAT_MJPEG; + frame_size = (uint_fast32_t)frm->mjpeg.wWidth * frm->mjpeg.wHeight * 16 / 8; /* YUV422 */ + break; + default: break; + } param->dwMaxVideoFrameSize = frame_size; } @@ -487,7 +620,7 @@ static bool _close_vc_itf(uint8_t rhport, videod_interface_t *self) /* The next descriptor after the class-specific VC interface header descriptor. */ void const *cur = (void const*)vc + vc->std.bLength + vc->ctl.bLength; /* The end of the video control interface descriptor. */ - void const *end = (void const*)vc + vc->std.bLength + vc->ctl.wTotalLength; + void const *end = _end_of_control_descriptor(vc); if (vc->std.bNumEndpoints) { /* Find the notification endpoint descriptor. */ cur = _find_desc(cur, end, TUSB_DESC_ENDPOINT); @@ -519,7 +652,7 @@ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t TU_ASSERT(vc->ctl.bInCollection <= CFG_TUD_VIDEO_STREAMING); /* Update to point the end of the video control interface descriptor. */ - end = cur + vc->std.bLength + vc->ctl.wTotalLength; + end = _end_of_control_descriptor(cur); /* Advance to the next descriptor after the class-specific VC interface header descriptor. */ cur += vc->std.bLength + vc->ctl.bLength; TU_LOG2(" bNumEndpoints %d\n", vc->std.bNumEndpoints); -- cgit v1.3.1 From 1debf6270786a612ad99172db76169e025e124f6 Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Wed, 10 Nov 2021 00:39:51 +0900 Subject: Fix compile errors --- .../device/video_capture/src/usb_descriptors.h | 6 +++--- src/class/video/video_device.c | 24 +++++++++++++--------- 2 files changed, 17 insertions(+), 13 deletions(-) (limited to 'examples/device') diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h index aa937e168..10bae4750 100644 --- a/examples/device/video_capture/src/usb_descriptors.h +++ b/examples/device/video_capture/src/usb_descriptors.h @@ -53,8 +53,8 @@ enum { /* Interface 1, Alternate 0 */\ + TUD_VIDEO_DESC_STD_VS_LEN\ + (TUD_VIDEO_DESC_CS_VS_IN_LEN + 1/*bNumFormats x bControlSize*/)\ - + TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR_LEN\ - + TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT_LEN\ + + TUD_VIDEO_DESC_CS_VS_FMT_MJPEG_LEN\ + + TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT_LEN\ + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN\ /* Interface 1, Alternate 1 */\ + TUD_VIDEO_DESC_STD_VS_LEN\ @@ -98,7 +98,7 @@ enum { /*bmaControls(1)*/0), \ /* Video stream format */ \ TUD_VIDEO_DESC_CS_VS_FMT_MJPEG(/*bFormatIndex*/1, /*bNumFrameDescriptors*/1, \ - 1, /*bDefaultFrameIndex*/1, 0, 0, 0, /*bCopyProtect*/0), \ + /*bmFlags*/0, /*bDefaultFrameIndex*/1, 0, 0, 0, /*bCopyProtect*/0), \ /* Video stream frame format */ \ TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT(/*bFrameIndex */1, 0, _width, _height, \ _width * _height * 16, _width * _height * 16 * _fps, \ diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 39e2e9aac..14eaca9a4 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -67,6 +67,7 @@ typedef union { uint8_t bDescriptorType; uint8_t bDescriptorSubType; uint8_t bFormatIndex; + uint8_t bNumFrameDescriptors; }; tusb_desc_cs_video_fmt_uncompressed_t uncompressed; tusb_desc_cs_video_fmt_mjpeg_t mjpeg; @@ -437,11 +438,11 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm tusb_desc_cs_video_fmt_t const *fmt = _find_desc_format(tu_desc_next(vs), end, fmtnum); TU_ASSERT(fmt != end); - switch (fmt->bDescriptorSubtype) { + switch (fmt->bDescriptorSubType) { case VIDEO_CS_ITF_VS_FORMAT_UNCOMPRESSED: param->wCompQuality = 1; /* 1 to 10000 */ break; - case VIDEO_CS_ITF_VS_FORMAT_MJPEG; + case VIDEO_CS_ITF_VS_FORMAT_MJPEG: break; default: return false; } @@ -459,11 +460,11 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm /* Set the parameters determined by the frame */ uint_fast32_t frame_size = param->dwMaxVideoFrameSize; if (!frame_size) { - switch (fmt->bDescriptorSubtype) { + switch (fmt->bDescriptorSubType) { case VIDEO_CS_ITF_VS_FORMAT_UNCOMPRESSED: frame_size = (uint_fast32_t)frm->uncompressed.wWidth * frm->uncompressed.wHeight * fmt->uncompressed.bBitsPerPixel / 8; break; - case VIDEO_CS_ITF_VS_FORMAT_MJPEG; + case VIDEO_CS_ITF_VS_FORMAT_MJPEG: frame_size = (uint_fast32_t)frm->mjpeg.wWidth * frm->mjpeg.wHeight * 16 / 8; /* YUV422 */ break; default: break; @@ -473,11 +474,12 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm uint_fast32_t interval = param->dwFrameInterval; if (!interval) { - if ((1 < frm->bFrameIntervalType) || - ((0 == frm->bFrameIntervalType) && (frm->dwFrameInterval[1] != frm->dwFrameInterval[0]))) { + if ((1 < frm->uncompressed.bFrameIntervalType) || + ((0 == frm->uncompressed.bFrameIntervalType) && + (frm->uncompressed.dwFrameInterval[1] != frm->uncompressed.dwFrameInterval[0]))) { return true; } - interval = frm->dwFrameInterval[0]; + interval = frm->uncompressed.dwFrameInterval[0]; param->dwFrameInterval = interval; } uint_fast32_t interval_ms = interval / 10000; @@ -709,6 +711,7 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint video_probe_and_commit_control_t *param = (video_probe_and_commit_control_t *)&stm->ep_buf; tu_memclr(param, sizeof(*param)); + TU_LOG2(" done 0\n"); return _update_streaming_parameters(stm, param); } /* Open endpoints of the new settings. */ @@ -737,6 +740,7 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint hdr->bHeaderLength = sizeof(*hdr); hdr->bmHeaderInfo = 0; + TU_LOG2(" done\n"); return true; } @@ -809,7 +813,7 @@ static int handle_video_ctl_cs_req(uint8_t rhport, uint8_t stage, if (stage == CONTROL_STAGE_SETUP) { TU_VERIFY(1 == request->wLength, VIDEO_ERROR_UNKNOWN); TU_VERIFY(tud_control_xfer(rhport, request, &self->power_mode, sizeof(self->power_mode)), VIDEO_ERROR_UNKNOWN); - } else if (stage == CONTROL_STAGE_ACK) { + } else if (stage == CONTROL_STAGE_DATA) { if (tud_video_power_mode_cb) return tud_video_power_mode_cb(ctl_idx, self->power_mode); } return VIDEO_ERROR_NONE; @@ -954,7 +958,7 @@ static int handle_video_stm_cs_req(uint8_t rhport, uint8_t stage, TU_VERIFY(sizeof(video_probe_and_commit_control_t) == request->wLength, VIDEO_ERROR_UNKNOWN); TU_VERIFY(tud_control_xfer(rhport, request, self->ep_buf, sizeof(video_probe_and_commit_control_t)), VIDEO_ERROR_UNKNOWN); - } else if (stage == CONTROL_STAGE_ACK) { + } else if (stage == CONTROL_STAGE_DATA) { TU_VERIFY(_update_streaming_parameters(self, (video_probe_and_commit_control_t*)self->ep_buf), VIDEO_ERROR_INVALID_VALUE_WITHIN_RANGE); } @@ -1009,7 +1013,7 @@ static int handle_video_stm_cs_req(uint8_t rhport, uint8_t stage, if (stage == CONTROL_STAGE_SETUP) { TU_VERIFY(sizeof(video_probe_and_commit_control_t) == request->wLength, VIDEO_ERROR_UNKNOWN); TU_VERIFY(tud_control_xfer(rhport, request, self->ep_buf, sizeof(video_probe_and_commit_control_t)), VIDEO_ERROR_UNKNOWN); - } else if (stage == CONTROL_STAGE_ACK) { + } else if (stage == CONTROL_STAGE_DATA) { TU_VERIFY(_update_streaming_parameters(self, (video_probe_and_commit_control_t*)self->ep_buf), VIDEO_ERROR_INVALID_VALUE_WITHIN_RANGE); if (tud_video_commit_cb) { return tud_video_commit_cb(self->index_vc, self->index_vs, (video_probe_and_commit_control_t*)self->ep_buf); -- cgit v1.3.1 From 3499aa2b2113f0098afff9eb2efd6dda78426a1b Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Thu, 6 Oct 2022 21:10:27 +0900 Subject: Fix pointer --- examples/device/video_capture/src/main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'examples/device') diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 362b168d4..60c58b853 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -110,7 +110,7 @@ static unsigned tx_busy = 0; static unsigned interval_ms = 1000 / FRAME_RATE; /* YUY2 frame buffer */ -#if 1 +#ifdef CFG_EXAMPLE_VIDEO_READONLY #include "images.h" static struct { uint32_t size; @@ -181,7 +181,7 @@ void video_task(void) already_sent = 1; start_ms = board_millis(); #ifdef CFG_EXAMPLE_VIDEO_READONLY - tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frames[frame_num % 8].buffer, frames[frame_num % 8].size); + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); @@ -194,7 +194,7 @@ void video_task(void) start_ms += interval_ms; #ifdef CFG_EXAMPLE_VIDEO_READONLY - tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frames[frame_num % 8].buffer, frames[frame_num % 8].size); + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); -- cgit v1.3.1 From aed8051f50dfb72187ba3c9a496d6ad2a57da9f8 Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Sat, 8 Oct 2022 21:53:32 +0900 Subject: Add motion jpeg --- examples/device/video_capture/CMakeLists.txt | 6 +++ examples/device/video_capture/Makefile | 7 +++ examples/device/video_capture/src/images.h | 3 ++ examples/device/video_capture/src/main.c | 14 ++++++ .../device/video_capture/src/usb_descriptors.c | 10 ++++ .../device/video_capture/src/usb_descriptors.h | 57 +++++++++++++++++++++- 6 files changed, 96 insertions(+), 1 deletion(-) (limited to 'examples/device') diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index cb321f9a8..b92a2b804 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -12,6 +12,12 @@ family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) add_executable(${PROJECT}) +if (FORCE_READONLY) +target_compile_definitions(${PROJECT} PRIVATE + CFG_EXAMPLE_VIDEO_READONLY +) +endif() + # Example source target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index 69b633fea..b06681538 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -1,6 +1,13 @@ include ../../../tools/top.mk include ../../make.mk +ifeq ($(DISABLE_MJPG),1) +CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPG +endif +ifeq ($(FORCE_READONLY),1) +CFLAGS += -DCFG_EXAMPLE_VIDEO_READONLY +endif + INC += \ src \ $(TOP)/hw \ diff --git a/examples/device/video_capture/src/images.h b/examples/device/video_capture/src/images.h index 33beff662..0398428b3 100644 --- a/examples/device/video_capture/src/images.h +++ b/examples/device/video_capture/src/images.h @@ -1,3 +1,4 @@ +#if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) static const unsigned char frame_buffer[128 * (96 + 1) * 2] = { /* 0 */ 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, 0xeb, 0x80, @@ -1649,6 +1650,7 @@ static const unsigned char frame_buffer[128 * (96 + 1) * 2] = { 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, 0x10, 0x80, }; +#else #define color_bar_0_jpg_len 511 #define color_bar_1_jpg_len 512 @@ -1931,3 +1933,4 @@ unsigned char color_bar_7_jpg[] = { 0x42, 0x51, 0x59, 0x8c, 0xb1, 0x45, 0x00, 0x25, 0x15, 0x98, 0xc4, 0xa2, 0xb5, 0x32, 0x12, 0x8a, 0xcc, 0x63, 0x68, 0xad, 0x8d, 0x84, 0xa2, 0xb3, 0x18, 0x94, 0x56, 0xa6, 0x47, 0xff, 0xd9 }; +#endif diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 60c58b853..3ceebe821 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -112,6 +112,8 @@ static unsigned interval_ms = 1000 / FRAME_RATE; /* YUY2 frame buffer */ #ifdef CFG_EXAMPLE_VIDEO_READONLY #include "images.h" + +# if !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) static struct { uint32_t size; uint8_t const *buffer; @@ -125,6 +127,8 @@ static struct { {color_bar_6_jpg_len, color_bar_6_jpg}, {color_bar_7_jpg_len, color_bar_7_jpg}, }; +# endif + #else static uint8_t frame_buffer[FRAME_WIDTH * FRAME_HEIGHT * 16 / 8]; static void fill_color_bar(uint8_t *buffer, unsigned start_position) @@ -181,7 +185,12 @@ void video_task(void) already_sent = 1; start_ms = board_millis(); #ifdef CFG_EXAMPLE_VIDEO_READONLY +# if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], + FRAME_WIDTH * FRAME_HEIGHT * 16/8); +# else tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); +# endif #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); @@ -194,7 +203,12 @@ void video_task(void) start_ms += interval_ms; #ifdef CFG_EXAMPLE_VIDEO_READONLY +# if defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) + tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)&frame_buffer[(frame_num % (FRAME_WIDTH / 2)) * 4], + FRAME_WIDTH * FRAME_HEIGHT * 16/8); +# else tud_video_n_frame_xfer(0, 0, (void*)(uintptr_t)frames[frame_num % 8].buffer, frames[frame_num % 8].size); +# endif #else fill_color_bar(frame_buffer, frame_num); tud_video_n_frame_xfer(0, 0, (void*)frame_buffer, FRAME_WIDTH * FRAME_HEIGHT * 16/8); diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 5c97f4fe1..4c63ab924 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -75,7 +75,11 @@ uint8_t const * tud_descriptor_device_cb(void) // Configuration Descriptor //--------------------------------------------------------------------+ +#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_MJPG_LEN) +#else #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_LEN) +#endif #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -96,9 +100,15 @@ uint8_t const desc_fs_configuration[] = // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0, 500), // IAD for Video Control +#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) + TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPG(4, EPNUM_VIDEO_IN, + FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, + CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) +#else TUD_VIDEO_CAPTURE_DESCRIPTOR(4, EPNUM_VIDEO_IN, FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) +#endif }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h index 10bae4750..631e638c9 100644 --- a/examples/device/video_capture/src/usb_descriptors.h +++ b/examples/device/video_capture/src/usb_descriptors.h @@ -44,6 +44,24 @@ enum { }; #define TUD_VIDEO_CAPTURE_DESC_LEN (\ + TUD_VIDEO_DESC_IAD_LEN\ + /* control */\ + + TUD_VIDEO_DESC_STD_VC_LEN\ + + (TUD_VIDEO_DESC_CS_VC_LEN + 1/*bInCollection*/)\ + + TUD_VIDEO_DESC_CAMERA_TERM_LEN\ + + TUD_VIDEO_DESC_OUTPUT_TERM_LEN\ + /* Interface 1, Alternate 0 */\ + + TUD_VIDEO_DESC_STD_VS_LEN\ + + (TUD_VIDEO_DESC_CS_VS_IN_LEN + 1/*bNumFormats x bControlSize*/)\ + + TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR_LEN\ + + TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT_LEN\ + + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN\ + /* Interface 1, Alternate 1 */\ + + TUD_VIDEO_DESC_STD_VS_LEN\ + + 7/* Endpoint */\ + ) + +#define TUD_VIDEO_CAPTURE_DESC_MJPG_LEN (\ TUD_VIDEO_DESC_IAD_LEN\ /* control */\ + TUD_VIDEO_DESC_STD_VC_LEN\ @@ -74,6 +92,43 @@ enum { TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR(_fmtidx, _numfmtdesc, TUD_VIDEO_GUID_I420, 12, _frmidx, _asrx, _asry, _interlace, _cp) #define TUD_VIDEO_CAPTURE_DESCRIPTOR(_stridx, _epin, _width, _height, _fps, _epsize) \ + TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \ + /* Video control 0 */ \ + TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \ + TUD_VIDEO_DESC_CS_VC( /* UVC 1.5*/ 0x0150, \ + /* wTotalLength - bLength */ \ + TUD_VIDEO_DESC_CAMERA_TERM_LEN + TUD_VIDEO_DESC_OUTPUT_TERM_LEN, \ + UVC_CLOCK_FREQUENCY, ITF_NUM_VIDEO_STREAMING), \ + TUD_VIDEO_DESC_CAMERA_TERM(UVC_ENTITY_CAP_INPUT_TERMINAL, 0, 0,\ + /*wObjectiveFocalLengthMin*/0, /*wObjectiveFocalLengthMax*/0,\ + /*wObjectiveFocalLength*/0, /*bmControls*/0), \ + TUD_VIDEO_DESC_OUTPUT_TERM(UVC_ENTITY_CAP_OUTPUT_TERMINAL, VIDEO_TT_STREAMING, 0, 1, 0), \ + /* Video stream alt. 0 */ \ + TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 0, 0, _stridx), \ + /* Video stream header for without still image capture */ \ + TUD_VIDEO_DESC_CS_VS_INPUT( /*bNumFormats*/1, \ + /*wTotalLength - bLength */\ + TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR_LEN\ + + TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT_LEN\ + + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING_LEN,\ + _epin, /*bmInfo*/0, /*bTerminalLink*/UVC_ENTITY_CAP_OUTPUT_TERMINAL, \ + /*bStillCaptureMethod*/0, /*bTriggerSupport*/0, /*bTriggerUsage*/0, \ + /*bmaControls(1)*/0), \ + /* Video stream format */ \ + TUD_VIDEO_DESC_CS_VS_FMT_YUY2(/*bFormatIndex*/1, /*bNumFrameDescriptors*/1, \ + /*bDefaultFrameIndex*/1, 0, 0, 0, /*bCopyProtect*/0), \ + /* Video stream frame format */ \ + TUD_VIDEO_DESC_CS_VS_FRM_UNCOMPR_CONT(/*bFrameIndex */1, 0, _width, _height, \ + _width * _height * 16, _width * _height * 16 * _fps, \ + _width * _height * 16, \ + (10000000/_fps), (10000000/_fps), (10000000/_fps)*_fps, (10000000/_fps)), \ + TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING(VIDEO_COLOR_PRIMARIES_BT709, VIDEO_COLOR_XFER_CH_BT709, VIDEO_COLOR_COEF_SMPTE170M), \ + /* VS alt 1 */\ + TUD_VIDEO_DESC_STD_VS(ITF_NUM_VIDEO_STREAMING, 1, 1, _stridx), \ + /* EP */ \ + TUD_VIDEO_DESC_EP_ISO(_epin, _epsize, 1) + +#define TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPG(_stridx, _epin, _width, _height, _fps, _epsize) \ TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \ /* Video control 0 */ \ TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \ @@ -102,7 +157,7 @@ enum { /* Video stream frame format */ \ TUD_VIDEO_DESC_CS_VS_FRM_MJPEG_CONT(/*bFrameIndex */1, 0, _width, _height, \ _width * _height * 16, _width * _height * 16 * _fps, \ - _width * _height * 16, \ + _width * _height * 16 / 8, \ (10000000/_fps), (10000000/_fps), (10000000/_fps)*_fps, (10000000/_fps)), \ TUD_VIDEO_DESC_CS_VS_COLOR_MATCHING(VIDEO_COLOR_PRIMARIES_BT709, VIDEO_COLOR_XFER_CH_BT709, VIDEO_COLOR_COEF_SMPTE170M), \ /* VS alt 1 */\ -- cgit v1.3.1 From 2c9b5ddff096b6c734346099b5cd4162db8735c9 Mon Sep 17 00:00:00 2001 From: kkitayam <45088311+kkitayam@users.noreply.github.com> Date: Wed, 12 Oct 2022 20:07:22 +0900 Subject: Rename descriptor macros for consistency --- examples/device/video_capture/Makefile | 4 ++-- examples/device/video_capture/src/usb_descriptors.c | 20 ++++++++++---------- examples/device/video_capture/src/usb_descriptors.h | 8 ++++---- 3 files changed, 16 insertions(+), 16 deletions(-) (limited to 'examples/device') diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index b06681538..fda66bcc1 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -1,8 +1,8 @@ include ../../../tools/top.mk include ../../make.mk -ifeq ($(DISABLE_MJPG),1) -CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPG +ifeq ($(DISABLE_MJPEG),1) +CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPEG endif ifeq ($(FORCE_READONLY),1) CFLAGS += -DCFG_EXAMPLE_VIDEO_READONLY diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 4c63ab924..499ee311c 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -75,10 +75,10 @@ uint8_t const * tud_descriptor_device_cb(void) // Configuration Descriptor //--------------------------------------------------------------------+ -#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_MJPG_LEN) +#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_MJPEG_LEN) #else -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_VIDEO_CAPTURE_DESC_UNCOMPR_LEN) #endif #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) @@ -100,14 +100,14 @@ uint8_t const desc_fs_configuration[] = // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0, 500), // IAD for Video Control -#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPG) - TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPG(4, EPNUM_VIDEO_IN, - FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, - CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) +#if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) + TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(4, EPNUM_VIDEO_IN, + FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, + CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) #else - TUD_VIDEO_CAPTURE_DESCRIPTOR(4, EPNUM_VIDEO_IN, - FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, - CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) + TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR(4, EPNUM_VIDEO_IN, + FRAME_WIDTH, FRAME_HEIGHT, FRAME_RATE, + CFG_TUD_VIDEO_STREAMING_EP_BUFSIZE) #endif }; diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h index 631e638c9..f1ed3c8e9 100644 --- a/examples/device/video_capture/src/usb_descriptors.h +++ b/examples/device/video_capture/src/usb_descriptors.h @@ -43,7 +43,7 @@ enum { ITF_NUM_TOTAL }; -#define TUD_VIDEO_CAPTURE_DESC_LEN (\ +#define TUD_VIDEO_CAPTURE_DESC_UNCOMPR_LEN (\ TUD_VIDEO_DESC_IAD_LEN\ /* control */\ + TUD_VIDEO_DESC_STD_VC_LEN\ @@ -61,7 +61,7 @@ enum { + 7/* Endpoint */\ ) -#define TUD_VIDEO_CAPTURE_DESC_MJPG_LEN (\ +#define TUD_VIDEO_CAPTURE_DESC_MJPEG_LEN (\ TUD_VIDEO_DESC_IAD_LEN\ /* control */\ + TUD_VIDEO_DESC_STD_VC_LEN\ @@ -91,7 +91,7 @@ enum { #define TUD_VIDEO_DESC_CS_VS_FMT_I420(_fmtidx, _numfmtdesc, _frmidx, _asrx, _asry, _interlace, _cp) \ TUD_VIDEO_DESC_CS_VS_FMT_UNCOMPR(_fmtidx, _numfmtdesc, TUD_VIDEO_GUID_I420, 12, _frmidx, _asrx, _asry, _interlace, _cp) -#define TUD_VIDEO_CAPTURE_DESCRIPTOR(_stridx, _epin, _width, _height, _fps, _epsize) \ +#define TUD_VIDEO_CAPTURE_DESCRIPTOR_UNCOMPR(_stridx, _epin, _width, _height, _fps, _epsize) \ TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \ /* Video control 0 */ \ TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \ @@ -128,7 +128,7 @@ enum { /* EP */ \ TUD_VIDEO_DESC_EP_ISO(_epin, _epsize, 1) -#define TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPG(_stridx, _epin, _width, _height, _fps, _epsize) \ +#define TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(_stridx, _epin, _width, _height, _fps, _epsize) \ TUD_VIDEO_DESC_IAD(ITF_NUM_VIDEO_CONTROL, /* 2 Interfaces */ 0x02, _stridx), \ /* Video control 0 */ \ TUD_VIDEO_DESC_STD_VC(ITF_NUM_VIDEO_CONTROL, 0, _stridx), \ -- cgit v1.3.1 From a6001fc8f2cfe0db2cf5ba410b49961781ce1803 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 18 Nov 2022 21:50:00 +0700 Subject: update uart read for lpc18/43 for testing --- examples/device/board_test/src/main.c | 9 ++++++++- hw/bsp/board.c | 6 ++++-- hw/bsp/board.h | 2 ++ hw/bsp/ea4357/ea4357.c | 4 +--- hw/bsp/lpc18/family.c | 4 +--- hw/bsp/rp2040/board.h | 2 +- 6 files changed, 17 insertions(+), 10 deletions(-) (limited to 'examples/device') diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 5e28cbb27..74beda55f 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -56,7 +56,7 @@ int main(void) { uint32_t interval_ms = board_button_read() ? BLINK_PRESSED : BLINK_UNPRESSED; - // Blink every interval ms + // Blink and print every interval ms if ( !(board_millis() - start_ms < interval_ms) ) { board_uart_write(HELLO_STR, strlen(HELLO_STR)); @@ -66,6 +66,13 @@ int main(void) board_led_write(led_state); led_state = 1 - led_state; // toggle } + + // echo + uint8_t ch; + if ( board_uart_read(&ch, 1) ) + { + board_uart_write(&ch, 1); + } } return 0; diff --git a/hw/bsp/board.c b/hw/bsp/board.c index e208624ba..a22b462d9 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -103,7 +103,8 @@ TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) { (void) fhdl; - return SEGGER_RTT_Read(0, buf, count); + int rd = (int) SEGGER_RTT_Read(0, buf, count); + return (rd > 0) ? rd : -1; } #endif @@ -143,7 +144,8 @@ TU_ATTR_USED int sys_write (int fhdl, const void *buf, size_t count) TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) { (void) fhdl; - return board_uart_read((uint8_t*) buf, (int) count); + int rd = board_uart_read((uint8_t*) buf, (int) count); + return (rd > 0) ? rd : -1; } #endif diff --git a/hw/bsp/board.h b/hw/bsp/board.h index 339e2e3b5..0826d7786 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -66,9 +66,11 @@ void board_led_write(bool state); uint32_t board_button_read(void); // Get characters from UART +// Return number of read bytes int board_uart_read(uint8_t* buf, int len); // Send characters to UART +// Return number of sent bytes int board_uart_write(void const * buf, int len); #if CFG_TUSB_OS == OPT_OS_NONE diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index 2c1d08770..f88d3b89e 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -272,9 +272,7 @@ uint32_t board_button_read(void) int board_uart_read(uint8_t* buf, int len) { - //return UART_ReceiveByte(BOARD_UART_DEV); - (void) buf; (void) len; - return 0; + return Chip_UART_Read(UART_DEV, buf, len); } int board_uart_write(void const * buf, int len) diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 0fc788873..72c20e034 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -141,9 +141,7 @@ uint32_t board_button_read(void) int board_uart_read(uint8_t* buf, int len) { - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; + return Chip_UART_Read(UART_DEV, buf, len); } int board_uart_write(void const * buf, int len) diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index 56b8fec84..f25f80e09 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -52,7 +52,7 @@ #endif // VBUS enable pin and its active state -// #define PIO_USB_VBUSEN_PIN 22 +#define PIO_USB_VBUSEN_PIN 22 #ifndef PIO_USB_VBUSEN_STATE #define PIO_USB_VBUSEN_STATE 1 -- cgit v1.3.1 From 460bef9dbb40d1c6990c1bfd2f8da48978550932 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 21 Nov 2022 15:49:38 +0700 Subject: host msc example work well with rp2040 pio-usb --- examples/device/board_test/src/main.c | 2 +- examples/host/cdc_msc_hid/CMakeLists.txt | 14 ++++++++++++- examples/host/cdc_msc_hid/src/main.c | 8 -------- examples/host/cdc_msc_hid/src/msc_app.c | 3 --- examples/host/cdc_msc_hid/src/tusb_config.h | 6 ++++++ examples/host/hid_controller/src/hid_app.c | 1 - examples/host/msc_file_explorer/src/main.c | 2 +- examples/host/msc_file_explorer/src/msc_app.c | 5 +++-- hw/bsp/board.h | 8 ++------ hw/bsp/rp2040/family.c | 29 +++++++++++++++------------ src/host/usbh.h | 2 +- 11 files changed, 43 insertions(+), 37 deletions(-) (limited to 'examples/device') diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 74beda55f..0289ca15f 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -69,7 +69,7 @@ int main(void) // echo uint8_t ch; - if ( board_uart_read(&ch, 1) ) + if ( board_uart_read(&ch, 1) > 0 ) { board_uart_write(&ch, 1); } diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index c4a4d8e63..5b44ef217 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -29,4 +29,16 @@ target_include_directories(${PROJECT} PUBLIC family_configure_host_example(${PROJECT}) # For rp2040, un-comment to enable pico-pio-usb -# family_add_pico_pio_usb(${PROJECT}) +family_add_pico_pio_usb(${PROJECT}) + +# due to warnings from Pico-PIO-USB +target_compile_options(${PROJECT} PUBLIC + -Wno-error=shadow + -Wno-error=cast-align + -Wno-error=cast-qual + -Wno-error=redundant-decls + -Wno-error=sign-conversion + -Wno-error=conversion + -Wno-error=sign-compare + -Wno-error=unused-function + ) diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 664cbf035..d26e41e8d 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -54,13 +54,8 @@ int main(void) tuh_task(); led_blinking_task(); -#if CFG_TUH_CDC cdc_task(); -#endif - -#if CFG_TUH_HID hid_app_task(); -#endif } return 0; @@ -69,7 +64,6 @@ int main(void) //--------------------------------------------------------------------+ // USB CDC //--------------------------------------------------------------------+ -#if CFG_TUH_CDC CFG_TUSB_MEM_SECTION static char serial_in_buffer[64] = { 0 }; // invoked ISR context @@ -90,8 +84,6 @@ void cdc_task(void) } -#endif - //--------------------------------------------------------------------+ // TinyUSB Callbacks //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index 77a72052d..80a5eab6f 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -25,8 +25,6 @@ #include "tusb.h" -#if CFG_TUH_MSC - //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ @@ -103,4 +101,3 @@ void tuh_msc_umount_cb(uint8_t dev_addr) // } } -#endif diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 33f34315b..c515405cb 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -34,6 +34,12 @@ // Board Specific Configuration //--------------------------------------------------------------------+ +#if CFG_TUSB_MCU == OPT_MCU_RP2040 +// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 +#define CFG_TUH_RPI_PIO_USB 0 +#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB +#endif + // RHPort number used for host can be defined by board.mk, default to port 0 #ifndef BOARD_TUH_RHPORT #define BOARD_TUH_RHPORT 0 diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index 582e01959..75c91400e 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -162,7 +162,6 @@ void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_re void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) { printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); - } // check if different than 2 diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 652986b7c..ab2cfd498 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -35,6 +35,7 @@ //--------------------------------------------------------------------+ void led_blinking_task(void); +// from msc_app.c extern bool msc_app_init(void); extern void msc_app_task(void); @@ -75,7 +76,6 @@ void tuh_umount_cb(uint8_t dev_addr) (void) dev_addr; } - //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index 6e5cb672a..b7c9212ee 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -25,6 +25,7 @@ #include #include "tusb.h" +#include "bsp/board.h" #include "ff.h" #include "diskio.h" @@ -75,13 +76,13 @@ void msc_app_task(void) { if (!_cli) return; - int ch = getchar(); + int ch = board_uart_getchar(); if ( ch > 0 ) { while( ch > 0 ) { embeddedCliReceiveChar(_cli, (char) ch); - ch = getchar(); + ch = board_uart_getchar(); } embeddedCliProcess(_cli); } diff --git a/hw/bsp/board.h b/hw/bsp/board.h index 0826d7786..52c64a1cc 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -132,15 +132,11 @@ static inline void board_delay(uint32_t ms) } } +// stdio getchar() is blocking, this is non-blocking version for uart static inline int board_uart_getchar(void) { uint8_t c; - return board_uart_read(&c, 1) ? (int) c : (-1); -} - -static inline int board_uart_putchar(uint8_t c) -{ - return board_uart_write(&c, 1); + return ( board_uart_read(&c, 1) > 0 ) ? (int) c : (-1); } #ifdef __cplusplus diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index ee5a73ff6..d78e2c754 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -121,16 +121,6 @@ static uart_inst_t *uart_inst; void board_init(void) { -#ifdef LED_PIN - bi_decl(bi_1pin_with_name(LED_PIN, "LED")); - gpio_init(LED_PIN); - gpio_set_dir(LED_PIN, GPIO_OUT); -#endif - - // Button -#ifndef BUTTON_BOOTSEL -#endif - #if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB // Set the system clock to a multiple of 120mhz for bitbanging USB with pico-usb set_sys_clock_khz(120000, true); @@ -148,6 +138,16 @@ void board_init(void) tuh_configure(BOARD_TUH_RHPORT, TUH_CFGID_RPI_PIO_USB_CONFIGURATION, &pio_cfg); #endif +#ifdef LED_PIN + bi_decl(bi_1pin_with_name(LED_PIN, "LED")); + gpio_init(LED_PIN); + gpio_set_dir(LED_PIN, GPIO_OUT); +#endif + + // Button +#ifndef BUTTON_BOOTSEL +#endif + #if defined(UART_DEV) && defined(LIB_PICO_STDIO_UART) bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART)); uart_inst = uart_get_instance(UART_DEV); @@ -192,10 +192,13 @@ uint32_t board_button_read(void) int board_uart_read(uint8_t* buf, int len) { #ifdef UART_DEV - for(int i=0;i Date: Mon, 28 Nov 2022 17:41:00 +0000 Subject: Fix issue with the CDC SetLineCoding request The SetLineCoding would fail as host would send the SETUP OUT phase before tinyUSB had setup a transaction for it. ft9xx port would ignore the transfer since there was no valid transaction setup for it. One SETUP data phase packet is cached now. --- .../device/cdc_dual_ports/src/usb_descriptors.c | 2 +- hw/bsp/brtmm90x/family.c | 17 ++++- hw/bsp/brtmm90x/family.mk | 10 +-- hw/mcu/bridgetek/ft9xx/ft90x-sdk | 2 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 82 +++++++++++++++++----- 5 files changed, 87 insertions(+), 26 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index cda1b63b6..9f212c78f 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -97,7 +97,7 @@ enum #define EPNUM_CDC_1_OUT 0x05 #define EPNUM_CDC_1_IN 0x85 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X || CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_0_NOTIF 0x81 diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 6b3c1f56c..77a03e909 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -27,8 +27,8 @@ #include "bsp/board.h" #include "board.h" -#include #include +#include #if CFG_TUD_ENABLED int8_t board_ft90x_vbus(void); // Board specific implementation of VBUS detection for USB device. @@ -213,3 +213,18 @@ uint32_t board_millis(void) return safe_ms; } + +// Restart the program +// Called in the event of a watchdog timeout +void chip_reboot(void) +{ + // SOFT reset + __asm__("call 0"); + #if 0 + // HARD reset + // Initiates data transfer from Flash Memory to Data Memory (DBG_CMDF2D3) + // followed by a system reboot + dbg_memory_copy(0xfe, 0, 0, 255); +#endif +} + diff --git a/hw/bsp/brtmm90x/family.mk b/hw/bsp/brtmm90x/family.mk index 3933f15cc..a476cfc06 100644 --- a/hw/bsp/brtmm90x/family.mk +++ b/hw/bsp/brtmm90x/family.mk @@ -21,7 +21,7 @@ endif # Add include files which are within the TinyUSB directory structure. INC += \ - $(TOP)/$(BOARD_PATH) + $(TOP)/$(BOARD_PATH) # Add required C Compiler flags for FT90X. CFLAGS += \ @@ -30,14 +30,14 @@ CFLAGS += \ -fvar-tracking-assignments \ -fmessage-length=0 \ -ffunction-sections \ - -DCFG_TUSB_MCU=OPT_MCU_FT90X + -DCFG_TUSB_MCU=OPT_MCU_FT90X + +# Maximum USB device speed supported by the board +CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED # lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration CFLAGS += -Wno-error=shadow -# Add include files outside the TinyUSB structure that are added manually. -CFLAGS += -I"$(FT9XX_SDK)/include" - # Set Linker flags. LD_FILE = hw/mcu/bridgetek/ft9xx/scripts/ldscript.ld LDFLAGS += $(addprefix -L,$(LDINC)) \ diff --git a/hw/mcu/bridgetek/ft9xx/ft90x-sdk b/hw/mcu/bridgetek/ft9xx/ft90x-sdk index c810d1312..0ea80ceaf 160000 --- a/hw/mcu/bridgetek/ft9xx/ft90x-sdk +++ b/hw/mcu/bridgetek/ft9xx/ft90x-sdk @@ -1 +1 @@ -Subproject commit c810d1312ded923c3c2ed9035c97bd0db4f35b5f +Subproject commit 0ea80ceafdf32e4e496cacc94178417e2ef4bf9c diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 2445593fe..080d633fa 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -38,9 +38,6 @@ #include #include -#include "board.h" -#include "bsp/board.h" - #define USBD_USE_STREAMS #include "device/dcd.h" @@ -53,14 +50,20 @@ extern int8_t board_ft90x_vbus(void); // Static array to store an incoming SETUP request for processing by tinyusb. +CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t _ft90x_setup_packet[8]; +// Static array to store one SETUP DATA packet until required by dcd_edpt_xfer. +CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN +static uint8_t _ft90x_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE]; +static uint8_t _ft90x_ctrl_buf_complete; + struct ft90x_xfer_state { volatile uint8_t valid; // Transfer is pending and total_size, remain_size, and buff_ptr are valid. - volatile int16_t total_size; // Total transfer size in bytes for this transfer. - volatile int16_t remain_size; // Total remaining in transfer. - volatile uint8_t *buff_ptr; // Pointer to buffer to transmit from or receive to. + int16_t total_size; // Total transfer size in bytes for this transfer. + int16_t remain_size; // Total remaining in transfer. + uint8_t *buff_ptr; // Pointer to buffer to transmit from or receive to. uint8_t type; // Endpoint type. Of type USBD_ENDPOINT_TYPE from endpoint descriptor. uint8_t dir; // Endpoint direction. TUSB_DIR_OUT or TUSB_DIR_IN. For control endpoint this is the current direction. @@ -766,13 +769,13 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) USBD_EP_CR_REG(USBD_EP_0) = (ep_reg_size << BIT_USBD_EP0_MAX_SIZE); } + CRITICAL_SECTION_BEGIN // Store the endpoint characteristics for later reference. ep_xfer[ep_number].dir = ep_dir; ep_xfer[ep_number].type = ep_type; ep_xfer[ep_number].size = ep_size; ep_xfer[ep_number].buff_size = ep_buff_size; - CRITICAL_SECTION_BEGIN // Clear register transaction continuation and signalling state. ep_xfer[ep_number].valid = 0; ep_xfer[ep_number].buff_ptr = NULL; @@ -809,12 +812,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to // Transfer currently in progress. if (ep_xfer[ep_number].valid == 0) { - status = true; - ep_xfer[ep_number].total_size = total_bytes; ep_xfer[ep_number].remain_size = total_bytes; ep_xfer[ep_number].buff_ptr = buffer; - ep_xfer[ep_number].valid = 1; if (ep_number == USBD_EP_0) { @@ -835,10 +835,33 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to ep_xfer[ep_number].buff_ptr += xfer_bytes; ep_xfer[ep_number].remain_size -= xfer_bytes; + + // Tell the interrupt handler to signal dcd_event_xfer_complete on completion. + ep_xfer[ep_number].valid = 1; } + else + { + // For OUT transfers on the control endpoint. + // The host may already have performed the first data transfer after the SETUP packet + // before the transfer is setup for it. + if ((ep_number == USBD_EP_0) && (_ft90x_ctrl_buf_complete)) + { + // Pull the received data packet from the packet cache and complete the transfer + // immediately. + memcpy(buffer, _ft90x_ctrl_buf, _ft90x_ctrl_buf_complete); + dcd_event_xfer_complete(BOARD_TUD_RHPORT, TUSB_DIR_OUT, _ft90x_ctrl_buf_complete, XFER_RESULT_SUCCESS, false); + } + else + { + // Tell the interrupt handler to wait for the packet to be received. + ep_xfer[ep_number].valid = 1; + } + } + status = true; } + CRITICAL_SECTION_END - + return status; } @@ -899,7 +922,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) void _ft90x_usbd_ISR(void) { - tud_int_handler(BOARD_TUD_RHPORT); // Resolves to dcd_int_handler(). + dcd_int_handler(BOARD_TUD_RHPORT); } void dcd_int_handler(uint8_t rhport) @@ -962,7 +985,6 @@ void dcd_int_handler(uint8_t rhport) { // Clear interrupt register. USBD_REG(epif) = MASK_USBD_EPIF_EP0IRQ; - // Test for an incoming SETUP request on the control endpoint. if (USBD_EP_SR_REG(USBD_EP_0) & MASK_USBD_EP0SR_SETUP) { @@ -976,7 +998,7 @@ void dcd_int_handler(uint8_t rhport) USBD_EP_SR_REG(USBD_EP_0) = MASK_USBD_EP0SR_STALL; } - // Host has sent a SETUP packet. Recieve this into the setup packet store. + // Host has sent a SETUP packet. Recieve this into the SETUP packet store. _ft90x_dusb_out(USBD_EP_0, (uint8_t *)_ft90x_setup_packet, sizeof(USB_device_request)); // Send the packet to tinyusb. @@ -985,6 +1007,9 @@ void dcd_int_handler(uint8_t rhport) // Clear the interrupt that signals a SETUP packet is received. USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_SETUP); + // Invalidate cache packet. + _ft90x_ctrl_buf_complete = 0; + // Allow new transfers on the control endpoint. ep_xfer[USBD_EP_0].valid = 0; return; @@ -998,15 +1023,36 @@ void dcd_int_handler(uint8_t rhport) // Transfer incoming data from an OUT packet to the buffer supplied. if (ep_xfer[USBD_EP_0].dir == TUSB_DIR_OUT) - { - xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, (uint8_t *)ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); + { + xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); } // Now signal completion of data packet. dcd_event_xfer_complete(BOARD_TUD_RHPORT, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); + // Invalidate cache packet. + _ft90x_ctrl_buf_complete = 0; + // Allow new transfers on the control endpoint. ep_xfer[USBD_EP_0].valid = 0; } + else + { + // We have received a data packet on the control endpoint without a transfer + // being initialised. This can be because the host has sent this packet before + // a new transfer has been initiated on the control endpoint. + // We will cache upto the maximum packet size for the control endpoint and + // use it later in dcd_edpt_xfer. + xfer_bytes = CFG_TUD_ENDPOINT0_SIZE; + + // Transfer incoming data from an OUT packet to the cache packet. + xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, _ft90x_ctrl_buf, xfer_bytes); + + // Set the size of the cache packet. + _ft90x_ctrl_buf_complete = xfer_bytes; + } + + // Clear the interrupt that signals a SETUP DATA packet is received. + USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_OPRDY); } } else // !(epif & MASK_USBD_EPIF_EP0IRQ) @@ -1035,7 +1081,7 @@ void dcd_int_handler(uint8_t rhport) if (ep_xfer[ep_number].dir == TUSB_DIR_OUT) { xfer_bytes = _ft90x_edpt_xfer_out(ep_number, - (uint8_t *)ep_xfer[ep_number].buff_ptr, + ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); ep_xfer[ep_number].buff_ptr += xfer_bytes; @@ -1047,7 +1093,7 @@ void dcd_int_handler(uint8_t rhport) if (ep_xfer[ep_number].remain_size > 0) { xfer_bytes = _ft90x_edpt_xfer_in(ep_number, - (uint8_t *)ep_xfer[ep_number].buff_ptr, + ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); ep_xfer[ep_number].buff_ptr += xfer_bytes; -- cgit v1.3.1 From 7d8d3eca730552355b5ad442f58b5a6b070d4d03 Mon Sep 17 00:00:00 2001 From: Gordon McNab Date: Tue, 29 Nov 2022 18:49:23 +0000 Subject: Fix transfers issues with FT9xx Correct USB FIFO use for setup data phases (OUT transfers). We cannot stop traffic on the control endpoint so we set a flag and pull data from host when tinyUSB requests it from the USB FIFO. Extend this for all endpoints although currently not required. Rename all instances of ft90x which can apply to ft93x as ft9xx. Add support for the cdc_dual_ports example for ft9xx. Add LED pin definition for board LED in a simple to access place on the Bridgetek MM900EVx boards. --- .../device/cdc_dual_ports/src/usb_descriptors.c | 12 +- hw/bsp/brtmm90x/boards/mm900evxb/board.h | 18 +- hw/bsp/brtmm90x/family.c | 22 +- hw/bsp/brtmm90x/family.mk | 6 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 225 ++++++++++++--------- 5 files changed, 167 insertions(+), 116 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 9f212c78f..5a8dea553 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -97,7 +97,7 @@ enum #define EPNUM_CDC_1_OUT 0x05 #define EPNUM_CDC_1_IN 0x85 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X || CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_0_NOTIF 0x81 @@ -108,6 +108,16 @@ enum #define EPNUM_CDC_1_OUT 0x05 #define EPNUM_CDC_1_IN 0x86 +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + + #define EPNUM_MSC_OUT 0x04 + #define EPNUM_MSC_IN 0x85 + #else #define EPNUM_CDC_0_NOTIF 0x81 #define EPNUM_CDC_0_OUT 0x02 diff --git a/hw/bsp/brtmm90x/boards/mm900evxb/board.h b/hw/bsp/brtmm90x/boards/mm900evxb/board.h index 57936fda5..930cb9d33 100644 --- a/hw/bsp/brtmm90x/boards/mm900evxb/board.h +++ b/hw/bsp/brtmm90x/boards/mm900evxb/board.h @@ -27,20 +27,28 @@ #ifndef BOARD_H_ #define BOARD_H_ -// Note: This definition file covers all MM900EV1B, MM900EV2B, and MM900EV3B boards. +// Note: This definition file covers all MM900EV1B, MM900EV2B, MM900EV3B, +// MM900EV-Lite boards. // Each of these boards has an FT900 device. #ifdef __cplusplus extern "C" { #endif -#define GPIO_UART0_TX 48 -#define GPIO_UART0_RX 49 -#define GPIO_ETH_LED0 61 -#define GPIO_ETH_LED1 62 +// UART is on connector CN1. +#define GPIO_UART0_TX 48 // Pin 4 of CN1. +#define GPIO_UART0_RX 49 // Pin 6 of CN1. + +// LED is connected to pins 4 (signal) and 2 (GND) of CN2. +#define GPIO_LED 36 + +// Remote wakeup is wired to pin 40 of CN1. #define GPIO_REMOTE_WAKEUP_PIN 18 + +// USB VBus signal is connected directly to the FT900. #define USBD_VBUS_DTC_PIN 3 +// Enable the Remote Wakeup signalling. #define GPIO_REMOTE_WAKEUP #ifdef __cplusplus diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 77a03e909..cc28cb69b 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -31,8 +31,8 @@ #include #if CFG_TUD_ENABLED -int8_t board_ft90x_vbus(void); // Board specific implementation of VBUS detection for USB device. -extern void ft90x_usbd_pm_ISR(uint16_t pmcfg); // Interrupt handler for USB device power management +int8_t board_ft9xx_vbus(void); // Board specific implementation of VBUS detection for USB device. +extern void ft9xx_usbd_pm_ISR(uint16_t pmcfg); // Interrupt handler for USB device power management #endif #ifdef GPIO_REMOTE_WAKEUP @@ -64,12 +64,10 @@ void board_init(void) // Use sizeof to avoid pulling in strlen unnecessarily. board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG)); -#if 0 - // Ethernet LEDs - gpio_function(GPIO_ETH_LED0, pad_gpio4); /* ETH LED0 */ - gpio_dir(GPIO_ETH_LED0, pad_dir_open_drain); - gpio_function(GPIO_ETH_LED1, pad_gpio5); /* ETH LED1 */ - gpio_dir(GPIO_ETH_LED1, pad_dir_output); +#ifdef GPIO_LED + gpio_function(GPIO_LED, pad_func_0); /* CN2 connector pin 4 */ + gpio_idrive(GPIO_LED, pad_drive_12mA); + gpio_dir(GPIO_LED, pad_dir_output); #endif sys_enable(sys_device_timer_wdt); @@ -153,14 +151,14 @@ void board_pm_ISR(void) ) { #if CFG_TUD_ENABLED - ft90x_usbd_pm_ISR(pmcfg); + ft9xx_usbd_pm_ISR(pmcfg); #endif } #endif } #if CFG_TUD_ENABLED -int8_t board_ft90x_vbus(void) +int8_t board_ft9xx_vbus(void) { return gpio_read(USBD_VBUS_DTC_PIN); } @@ -173,7 +171,11 @@ int8_t board_ft90x_vbus(void) // Turn LED on or off void board_led_write(bool state) { +#if 0 gpio_write(GPIO_ETH_LED0, state); +#else + gpio_write(GPIO_LED, state); +#endif } // Get the current state of button diff --git a/hw/bsp/brtmm90x/family.mk b/hw/bsp/brtmm90x/family.mk index a476cfc06..f45e27cb5 100644 --- a/hw/bsp/brtmm90x/family.mk +++ b/hw/bsp/brtmm90x/family.mk @@ -3,8 +3,8 @@ CROSS_COMPILE = ft32-elf- SKIP_NANOLIB = 1 # Set to use FT90X prebuilt libraries. -FT90X_PREBUILT_LIBS = 0 -ifeq ($(FT90X_PREBUILT_LIBS),1) +FT9XX_PREBUILT_LIBS = 0 +ifeq ($(FT9XX_PREBUILT_LIBS),1) # If the FT90X toolchain is installed on Windows systems then the SDK # include files and prebuilt libraries are at: %FT90X_TOOLCHAIN%/hardware FT9XX_SDK = $(FT90X_TOOLCHAIN)/hardware @@ -48,7 +48,7 @@ LDFLAGS += $(addprefix -L,$(LDINC)) \ SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c # Linker library. -ifneq ($(FT90X_PREBUILT_LIBS),1) +ifneq ($(FT9XX_PREBUILT_LIBS),1) # Optionally add in files from the Bridgetek SDK instead of the prebuilt # library. These are the minimum required. SRC_C += $(FT9XX_SDK)/src/sys.c diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 080d633fa..50f7018db 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -47,20 +47,17 @@ //--------------------------------------------------------------------+ // Board code will determine the state of VBUS from USB host. -extern int8_t board_ft90x_vbus(void); +extern int8_t board_ft9xx_vbus(void); // Static array to store an incoming SETUP request for processing by tinyusb. CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN -static uint8_t _ft90x_setup_packet[8]; +static uint8_t _ft9xx_setup_packet[8]; -// Static array to store one SETUP DATA packet until required by dcd_edpt_xfer. -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN -static uint8_t _ft90x_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE]; -static uint8_t _ft90x_ctrl_buf_complete; - -struct ft90x_xfer_state +struct ft9xx_xfer_state { + volatile uint8_t ready; // OUT Transfer has been received and waiting for transfer. volatile uint8_t valid; // Transfer is pending and total_size, remain_size, and buff_ptr are valid. + int16_t total_size; // Total transfer size in bytes for this transfer. int16_t remain_size; // Total remaining in transfer. uint8_t *buff_ptr; // Pointer to buffer to transmit from or receive to. @@ -71,24 +68,24 @@ struct ft90x_xfer_state uint16_t size; // Max packet size for endpoint from endpoint descriptor. }; // Endpoint description array for each endpoint. -static struct ft90x_xfer_state ep_xfer[USBD_MAX_ENDPOINT_COUNT]; +static struct ft9xx_xfer_state ep_xfer[USBD_MAX_ENDPOINT_COUNT]; // USB speed. static tusb_speed_t _speed; // Interrupt handlers. -void _ft90x_usbd_ISR(void); // Interrupt handler for USB device. -void ft90x_usbd_pm_ISR(void); // Interrupt handler for USB device for power management (called by board). +void _ft9xx_usbd_ISR(void); // Interrupt handler for USB device. +void ft9xx_usbd_pm_ISR(void); // Interrupt handler for USB device for power management (called by board). // Internal functions forward declarations. -static uint16_t _ft90x_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes); -static uint16_t _ft90x_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes); -static void _ft90x_reset_edpts(void); -static inline void _ft90x_phy_enable(bool en); -static void _ft90x_usb_speed(void); -static void _dcd_ft90x_attach(void); -static void _dcd_ft90x_detach(void) __attribute__((unused)); -static uint16_t _ft90x_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_t length); -static uint16_t _ft90x_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t length); +static uint16_t _ft9xx_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes); +static uint16_t _ft9xx_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes); +static void _ft9xx_reset_edpts(void); +static inline void _ft9xx_phy_enable(bool en); +static void _ft9xx_usb_speed(void); +static void _dcd_ft9xx_attach(void); +static void _dcd_ft9xx_detach(void) __attribute__((unused)); +static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_t length); +static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t length); // Internal functions. @@ -96,7 +93,7 @@ static uint16_t _ft90x_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len // This can be up-to the maximum packet size of the endpoint. // Continuation of a transfer beyond the maximum packet size is performed // by the interrupt handler. -static uint16_t _ft90x_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) +static uint16_t _ft9xx_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) { //Note: this is called from only the interrupt handler when an OUT transfer is called. uint16_t ep_size = ep_xfer[ep_number].size; @@ -111,7 +108,7 @@ static uint16_t _ft90x_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_ //; // Send the first packet of max packet size - xfer_bytes = _ft90x_dusb_out(ep_number, (uint8_t *)buffer, xfer_bytes); + xfer_bytes = _ft9xx_dusb_out(ep_number, (uint8_t *)buffer, xfer_bytes); if (ep_number == USBD_EP_0) { // Set flags to indicate data ready. @@ -129,7 +126,7 @@ static uint16_t _ft90x_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_ // This can be up-to the maximum packet size of the endpoint. // Continuation of a transfer beyond the maximum packet size is performed // by the interrupt handler. -static uint16_t _ft90x_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) +static uint16_t _ft9xx_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) { //Note: this may be called from the interrupt handler or from normal code. uint8_t end = 0; @@ -167,7 +164,7 @@ static uint16_t _ft90x_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t } - xfer_bytes = _ft90x_dusb_in(ep_number, (uint8_t *)buffer, xfer_bytes); + xfer_bytes = _ft9xx_dusb_in(ep_number, (uint8_t *)buffer, xfer_bytes); if (ep_number == USBD_EP_0) { @@ -193,13 +190,13 @@ static uint16_t _ft90x_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t // Reset all non-control endpoints to a default state. // Control endpoint is always enabled and ready. All others disabled. -static void _ft90x_reset_edpts(void) +static void _ft9xx_reset_edpts(void) { // Disable all endpoints and remove configuration values. for (int i = 1; i < USBD_MAX_ENDPOINT_COUNT; i++) { // Clear settings. - tu_memclr(&ep_xfer[i], sizeof(struct ft90x_xfer_state)); + tu_memclr(&ep_xfer[i], sizeof(struct ft9xx_xfer_state)); // Disable hardware. USBD_EP_CR_REG(i) = 0; } @@ -209,7 +206,7 @@ static void _ft90x_reset_edpts(void) } // Enable or disable the USB PHY. -static inline void _ft90x_phy_enable(bool en) +static inline void _ft9xx_phy_enable(bool en) { if (en) SYS->PMCFG_L |= MASK_SYS_PMCFG_DEV_PHY_EN; @@ -218,7 +215,7 @@ static inline void _ft90x_phy_enable(bool en) } // Safely connect to the USB. -static void _dcd_ft90x_attach(void) +static void _dcd_ft9xx_attach(void) { uint8_t reg; @@ -274,7 +271,7 @@ static void _dcd_ft90x_attach(void) } // Gracefully disconnect from the USB. -static void _dcd_ft90x_detach(void) +static void _dcd_ft9xx_detach(void) { // Disable device connect/disconnect/host reset detection. SYS->PMCFG_L = SYS->PMCFG_L & (~MASK_SYS_PMCFG_DEV_DETECT_EN); @@ -316,7 +313,7 @@ static void _dcd_ft90x_detach(void) // Determine the speed of the USB to which we are connected. // Set the speed of the PHY accordingly. // High speed can be disabled through CFG_TUSB_RHPORT0_MODE or CFG_TUD_MAX_SPEED settings. -static void _ft90x_usb_speed(void) +static void _ft9xx_usb_speed(void) { uint8_t fctrl_val; @@ -379,7 +376,7 @@ static void _ft90x_usb_speed(void) // If streaming is disabled then it will send each byte of the buffer in turn // to the FIFO. The is no reason to not stream. // The total number of bytes sent to the FIFO is returned. -static uint16_t _ft90x_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_t length) +static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_t length) { uint16_t bytes_read = 0; uint16_t buff_size = length; @@ -436,7 +433,7 @@ static uint16_t _ft90x_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_ // If streaming is disabled then it will receive each byte from the FIFO in turn // to the buffer. The is no reason to not stream. // The total number of bytes received from the FIFO is returned. -static uint16_t _ft90x_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t length) +static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t length) { #ifdef USBD_USE_STREAMS volatile uint8_t *data_reg; @@ -514,11 +511,11 @@ static uint16_t _ft90x_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len // Initialize controller to device mode void dcd_init(uint8_t rhport) { - TU_LOG2("FT90x initialisation\r\n"); + TU_LOG2("FT9xx initialisation\r\n"); - _dcd_ft90x_attach(); + _dcd_ft9xx_attach(); - interrupt_attach(interrupt_usb_device, (int8_t)interrupt_usb_device, _ft90x_usbd_ISR); + interrupt_attach(interrupt_usb_device, (int8_t)interrupt_usb_device, _ft9xx_usbd_ISR); dcd_connect(rhport); } @@ -527,7 +524,7 @@ void dcd_init(uint8_t rhport) void dcd_int_enable(uint8_t rhport) { (void)rhport; - TU_LOG3("FT90x int enable\r\n"); + TU_LOG3("FT9xx int enable\r\n"); // Peripheral devices interrupt enable. interrupt_enable_globally(); @@ -537,7 +534,7 @@ void dcd_int_enable(uint8_t rhport) void dcd_int_disable(uint8_t rhport) { (void)rhport; - TU_LOG3("FT90x int disable\r\n"); + TU_LOG3("FT9xx int disable\r\n"); // Peripheral devices interrupt disable. interrupt_disable_globally(); @@ -603,18 +600,18 @@ void dcd_remote_wakeup(uint8_t rhport) void dcd_connect(uint8_t rhport) { (void)rhport; - TU_LOG2("FT90x connect\r\n"); + TU_LOG2("FT9xx connect\r\n"); CRITICAL_SECTION_BEGIN // Is device connected? - if (board_ft90x_vbus()) + if (board_ft9xx_vbus()) { // Clear/disable address register. USBD_REG(faddr) = 0; - _ft90x_phy_enable(true); + _ft9xx_phy_enable(true); // Determine bus speed and signal speed to tusb. - _ft90x_usb_speed(); + _ft9xx_usb_speed(); } // Setup the control endpoint only. @@ -639,17 +636,17 @@ void dcd_connect(uint8_t rhport) USBD_REG(epie) = (MASK_USBD_EPIE_EP0IE); // Restore default endpoint state. - _ft90x_reset_edpts(); + _ft9xx_reset_edpts(); } // Disconnect by disabling internal pull-up resistor on D+/D- void dcd_disconnect(uint8_t rhport) { (void)rhport; - TU_LOG2("FT90x disconnect\r\n"); + TU_LOG2("FT9xx disconnect\r\n"); // Disable the USB PHY. - _ft90x_phy_enable(false); + _ft9xx_phy_enable(false); } void dcd_sof_enable(uint8_t rhport, bool en) @@ -677,12 +674,12 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) uint8_t ep_reg_data = 0; int16_t total_ram; - TU_LOG2("FT90x endpoint open %d %c\r\n", ep_number, ep_dir?'I':'O'); + TU_LOG2("FT9xx endpoint open %d %c\r\n", ep_number, ep_dir?'I':'O'); // Check that the requested endpoint number is allowable. if (ep_number >= USBD_MAX_ENDPOINT_COUNT) { - TU_LOG1("FT90x endpoint not valid: requested %d max %d\r\n", ep_number, USBD_MAX_ENDPOINT_COUNT); + TU_LOG1("FT9xx endpoint not valid: requested %d max %d\r\n", ep_number, USBD_MAX_ENDPOINT_COUNT); return false; } @@ -694,7 +691,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) } if (ep_reg_size > USBD_EP_MAX_SIZE_1024) { - TU_LOG1("FT90x endpoint size not valid: requested %d max 1024\r\n", ep_size); + TU_LOG1("FT9xx endpoint size not valid: requested %d max 1024\r\n", ep_size); return false; } // Calculate actual amount of buffer RAM used by this endpoint. This may be more than the @@ -709,9 +706,9 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) if (ep_xfer[ep_number].type != USBD_EP_TYPE_DISABLED) { // This could be because an endpoint has been assigned with the same number. - // On FT90x, IN and OUT endpoints may not have the same number. e.g. There + // On FT9xx, IN and OUT endpoints may not have the same number. e.g. There // cannot been an 0x81 and 0x01 endpoint. - TU_LOG1("FT90x endpoint %d already assigned\r\n", ep_number); + TU_LOG1("FT9xx endpoint %d already assigned\r\n", ep_number); return false; } @@ -723,7 +720,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) else total_ram = USBD_RAMTOTAL_OUT; // Work out how much has been allocated to existing endpoints. - // The total RAM allocated shoudl alsyes be a positive number as this + // The total RAM allocated should always be a positive number as this // algorithm should not let it go below zero. for (int i = 1; i < USBD_MAX_ENDPOINT_COUNT; i++) { @@ -735,14 +732,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) } } } - // The control endpoint is taken into account as well. - total_ram -= ep_xfer[0].buff_size; + + if (sys_check_ft900_revB()) + { + // The control endpoint is taken into account as well on RevB silicon. + total_ram -= ep_xfer[0].buff_size; + } + // Make sure we have enough space. The corner case is having zero bytes // free which means that total_ram must be signed as zero bytes free is // allowable. if (total_ram < ep_buff_size) { - TU_LOG1("FT90x insufficient buffer RAM for endpoint %d\r\n", ep_number); + TU_LOG1("FT9xx insufficient buffer RAM for endpoint %d\r\n", ep_number); return false; } @@ -761,7 +763,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) //ep_reg_data |= MASK_USBD_EPxCR_DB; // Set the control endpoint for this endpoint. USBD_EP_CR_REG(ep_number) = ep_reg_data; - TU_LOG2("FT90x endpoint setting %x\r\n", ep_reg_data); + TU_LOG2("FT9xx endpoint setting %x\r\n", ep_reg_data); } else { @@ -777,6 +779,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) ep_xfer[ep_number].buff_size = ep_buff_size; // Clear register transaction continuation and signalling state. + ep_xfer[ep_number].ready = 0; ep_xfer[ep_number].valid = 0; ep_xfer[ep_number].buff_ptr = NULL; ep_xfer[ep_number].total_size = 0; @@ -791,7 +794,7 @@ void dcd_edpt_close_all(uint8_t rhport) { (void)rhport; // Reset the endpoint configurations. - _ft90x_reset_edpts(); + _ft9xx_reset_edpts(); } // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack @@ -799,7 +802,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to { (void)rhport; uint8_t ep_number = tu_edpt_number(ep_addr); - uint8_t dir = tu_edpt_dir(ep_addr); + uint8_t ep_dir = tu_edpt_dir(ep_addr); uint16_t xfer_bytes; bool status = false; @@ -809,6 +812,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to // ep_xfer is used to tell the interrupt handler what to do. // ep_xfer can be used at interrupt level to continue transfers. CRITICAL_SECTION_BEGIN + // Transfer currently in progress. if (ep_xfer[ep_number].valid == 0) { @@ -818,7 +822,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to if (ep_number == USBD_EP_0) { - ep_xfer[USBD_EP_0].dir = dir; + ep_xfer[USBD_EP_0].dir = ep_dir; } else { @@ -827,11 +831,11 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to USBD_REG(epie) = USBD_REG(epie) | (1 << ep_number); } - if (dir == TUSB_DIR_IN) + if (ep_dir == TUSB_DIR_IN) { // For IN transfers send the first packet as a starter. Interrupt handler to complete // this if it is larger than one packet. - xfer_bytes = _ft90x_edpt_xfer_in(ep_number, buffer, total_bytes); + xfer_bytes = _ft9xx_edpt_xfer_in(ep_number, buffer, total_bytes); ep_xfer[ep_number].buff_ptr += xfer_bytes; ep_xfer[ep_number].remain_size -= xfer_bytes; @@ -839,26 +843,37 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to // Tell the interrupt handler to signal dcd_event_xfer_complete on completion. ep_xfer[ep_number].valid = 1; } - else + else // (dir == TUSB_DIR_OUT) { // For OUT transfers on the control endpoint. // The host may already have performed the first data transfer after the SETUP packet // before the transfer is setup for it. - if ((ep_number == USBD_EP_0) && (_ft90x_ctrl_buf_complete)) + if (ep_xfer[ep_number].ready) { - // Pull the received data packet from the packet cache and complete the transfer - // immediately. - memcpy(buffer, _ft90x_ctrl_buf, _ft90x_ctrl_buf_complete); - dcd_event_xfer_complete(BOARD_TUD_RHPORT, TUSB_DIR_OUT, _ft90x_ctrl_buf_complete, XFER_RESULT_SUCCESS, false); + // We have received a data packet on the endpoint without a transfer + // being initialised. This can be because the host has sent this packet before + // a new transfer has been initiated on the endpoint. + // We will now stream the data from the FIFO. + ep_xfer[ep_number].ready = 0; + + // Transfer incoming data from an OUT packet to the buffer. + xfer_bytes = _ft9xx_edpt_xfer_out(ep_number, buffer, total_bytes); + // Report completion of the transfer. + dcd_event_xfer_complete(BOARD_TUD_RHPORT, ep_number /*| TUSB_DIR_OUT_MASK */, xfer_bytes, XFER_RESULT_SUCCESS, false); } else { - // Tell the interrupt handler to wait for the packet to be received. + // Tell the interrupt handler to wait for the packet to be received and + // then report the transfer complete with dcd_event_xfer_complete. ep_xfer[ep_number].valid = 1; } } status = true; } + else + { + // Note: should not arrive here. + } CRITICAL_SECTION_END @@ -912,6 +927,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) USBD_EP_SR_REG(ep_number) = MASK_USBD_EPxSR_CLR_TOGGLE; // Allow transfers to restart. + ep_xfer[ep_number].ready = 0; ep_xfer[ep_number].valid = 0; ep_xfer[ep_number].remain_size = 0; CRITICAL_SECTION_END @@ -920,7 +936,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) // Interrupt handling. -void _ft90x_usbd_ISR(void) +void _ft9xx_usbd_ISR(void) { dcd_int_handler(BOARD_TUD_RHPORT); } @@ -959,7 +975,7 @@ void dcd_int_handler(uint8_t rhport) if (cmif & MASK_USBD_CMIF_RSTIRQ) //Handle Reset interrupt { // Reset endpoints to default state. - _ft90x_reset_edpts(); + _ft9xx_reset_edpts(); dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true); } if (cmif & MASK_USBD_CMIF_SUSIRQ) //Handle Suspend interrupt @@ -999,18 +1015,18 @@ void dcd_int_handler(uint8_t rhport) } // Host has sent a SETUP packet. Recieve this into the SETUP packet store. - _ft90x_dusb_out(USBD_EP_0, (uint8_t *)_ft90x_setup_packet, sizeof(USB_device_request)); + _ft9xx_dusb_out(USBD_EP_0, (uint8_t *)_ft9xx_setup_packet, sizeof(USB_device_request)); // Send the packet to tinyusb. - dcd_event_setup_received(BOARD_TUD_RHPORT, _ft90x_setup_packet, true); + dcd_event_setup_received(BOARD_TUD_RHPORT, _ft9xx_setup_packet, true); // Clear the interrupt that signals a SETUP packet is received. USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_SETUP); - // Invalidate cache packet. - _ft90x_ctrl_buf_complete = 0; + // Any SETUP packet will clear the incoming FIFO. + ep_xfer[USBD_EP_0].ready = 0; - // Allow new transfers on the control endpoint. + // Allow new DATA and ACK transfers on the control endpoint. ep_xfer[USBD_EP_0].valid = 0; return; } @@ -1024,35 +1040,28 @@ void dcd_int_handler(uint8_t rhport) // Transfer incoming data from an OUT packet to the buffer supplied. if (ep_xfer[USBD_EP_0].dir == TUSB_DIR_OUT) { - xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); + xfer_bytes = _ft9xx_edpt_xfer_out(USBD_EP_0, ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); } // Now signal completion of data packet. - dcd_event_xfer_complete(BOARD_TUD_RHPORT, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(BOARD_TUD_RHPORT, USBD_EP_0 | (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), + xfer_bytes, XFER_RESULT_SUCCESS, true); - // Invalidate cache packet. - _ft90x_ctrl_buf_complete = 0; + // Incoming FIFO has been cleared. + ep_xfer[USBD_EP_0].ready = 0; // Allow new transfers on the control endpoint. ep_xfer[USBD_EP_0].valid = 0; } + // No transfer is in flight for EP0. else { // We have received a data packet on the control endpoint without a transfer // being initialised. This can be because the host has sent this packet before // a new transfer has been initiated on the control endpoint. - // We will cache upto the maximum packet size for the control endpoint and - // use it later in dcd_edpt_xfer. - xfer_bytes = CFG_TUD_ENDPOINT0_SIZE; - - // Transfer incoming data from an OUT packet to the cache packet. - xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, _ft90x_ctrl_buf, xfer_bytes); - - // Set the size of the cache packet. - _ft90x_ctrl_buf_complete = xfer_bytes; + // We will record that there is data in the FIFO for dcd_edpt_xfer to obtain + // once the transfer is initiated. + ep_xfer[USBD_EP_0].ready = 1; } - - // Clear the interrupt that signals a SETUP DATA packet is received. - USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_OPRDY); } } else // !(epif & MASK_USBD_EPIF_EP0IRQ) @@ -1072,7 +1081,6 @@ void dcd_int_handler(uint8_t rhport) if (ep_xfer[ep_number].valid) { xfer_bytes = 0; - uint8_t ep_dirmask = (ep_xfer[ep_number].dir ? TUSB_DIR_IN_MASK : 0); // Clear interrupt register for this endpoint. USBD_REG(epif) = MASK_USBD_EPIF_IRQ(ep_number); @@ -1080,10 +1088,15 @@ void dcd_int_handler(uint8_t rhport) // Start or continue an OUT transfer. if (ep_xfer[ep_number].dir == TUSB_DIR_OUT) { - xfer_bytes = _ft90x_edpt_xfer_out(ep_number, + xfer_bytes = _ft9xx_edpt_xfer_out(ep_number, ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); + // Report each OUT packet received to the stack. + dcd_event_xfer_complete(BOARD_TUD_RHPORT, + ep_number /* | TUSB_DIR_OUT_MASK */, + xfer_bytes, XFER_RESULT_SUCCESS, true); + ep_xfer[ep_number].buff_ptr += xfer_bytes; ep_xfer[ep_number].remain_size -= xfer_bytes; } @@ -1092,27 +1105,45 @@ void dcd_int_handler(uint8_t rhport) { if (ep_xfer[ep_number].remain_size > 0) { - xfer_bytes = _ft90x_edpt_xfer_in(ep_number, + xfer_bytes = _ft9xx_edpt_xfer_in(ep_number, ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); ep_xfer[ep_number].buff_ptr += xfer_bytes; ep_xfer[ep_number].remain_size -= xfer_bytes; } + + if (ep_xfer[ep_number].remain_size == 0) + { + dcd_event_xfer_complete(BOARD_TUD_RHPORT, + ep_number | TUSB_DIR_IN_MASK, + ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); + } } // When the transfer is complete... if (ep_xfer[ep_number].remain_size == 0) { - // Signal tinyUSB. - dcd_event_xfer_complete(BOARD_TUD_RHPORT, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); - - // Allow new transfers on this endpoint. + // Finish this transfer and allow new transfers on this endpoint. ep_xfer[ep_number].valid = 0; // Disable the interrupt for this endpoint now it is complete. USBD_REG(epie) = USBD_REG(epie) & (~(1 << ep_number)); } + + ep_xfer[ep_number].ready = 0; + } + // No OUT transfer is in flight for this endpoint. + else + { + if (ep_xfer[ep_number].dir == TUSB_DIR_OUT) + { + // We will record that there is data in the FIFO for dcd_edpt_xfer to obtain + // once the transfer is initiated. + // Strictly this should not happen for a non-control endpoint. Interrupts + // are disabled when there are no transfers setup for an endpoint. + ep_xfer[ep_number].ready = 1; + } } } } @@ -1121,7 +1152,7 @@ void dcd_int_handler(uint8_t rhport) // Power management interrupt handler. // This handles USB device related power management interrupts only. -void ft90x_usbd_pm_ISR(void) +void ft9xx_usbd_pm_ISR(void) { uint16_t pmcfg = SYS->PMCFG_H; -- cgit v1.3.1 From fe63e30a4408dacc714ad9fcf39cf6fcf7c7d865 Mon Sep 17 00:00:00 2001 From: Gordon McNab Date: Wed, 30 Nov 2022 11:46:13 +0000 Subject: Add FT9xx for cdc_dual_ports Fix handling of interrupt endpoints. i.e. no ZLPs. Fix the assignation of endpoint types. Add button support for MM900evx boards. On board support do not block for UART input. --- .../device/cdc_dual_ports/src/usb_descriptors.c | 11 ++++---- hw/bsp/brtmm90x/boards/mm900evxb/board.h | 2 ++ hw/bsp/brtmm90x/family.c | 31 +++++++++++++++++----- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 29 +++++++++++++------- 4 files changed, 52 insertions(+), 21 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 5a8dea553..4eb8c7c27 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -111,12 +111,13 @@ enum #elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X // FT9XX doesn't support a same endpoint number with different direction IN and OUT // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_CDC_NOTIF 0x81 - #define EPNUM_CDC_OUT 0x02 - #define EPNUM_CDC_IN 0x83 + #define EPNUM_CDC_0_NOTIF 0x81 + #define EPNUM_CDC_0_OUT 0x02 + #define EPNUM_CDC_0_IN 0x83 - #define EPNUM_MSC_OUT 0x04 - #define EPNUM_MSC_IN 0x85 + #define EPNUM_CDC_1_NOTIF 0x84 + #define EPNUM_CDC_1_OUT 0x05 + #define EPNUM_CDC_1_IN 0x86 #else #define EPNUM_CDC_0_NOTIF 0x81 diff --git a/hw/bsp/brtmm90x/boards/mm900evxb/board.h b/hw/bsp/brtmm90x/boards/mm900evxb/board.h index 930cb9d33..76813b116 100644 --- a/hw/bsp/brtmm90x/boards/mm900evxb/board.h +++ b/hw/bsp/brtmm90x/boards/mm900evxb/board.h @@ -41,6 +41,8 @@ // LED is connected to pins 4 (signal) and 2 (GND) of CN2. #define GPIO_LED 36 +// Button is connected to pins 6 (signal) and 2 (GND) of CN2. +#define GPIO_BUTTON 37 // Remote wakeup is wired to pin 40 of CN1. #define GPIO_REMOTE_WAKEUP_PIN 18 diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index cc28cb69b..8155c0afc 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -49,11 +49,16 @@ void board_pm_ISR(void); void board_init(void) { sys_reset_all(); + // Enable the UART Device. sys_enable(sys_device_uart0); // Set UART0 GPIO functions to UART0_TXD and UART0_RXD. +#ifdef GPIO_UART0_TX gpio_function(GPIO_UART0_TX, pad_uart0_txd); /* UART0 TXD */ +#endif +#ifdef GPIO_UART0_RX gpio_function(GPIO_UART0_RX, pad_uart0_rxd); /* UART0 RXD */ +#endif uart_open(UART0, /* Device */ 1, /* Prescaler = 1 */ UART_DIVIDER_19200_BAUD, /* Divider = 1302 */ @@ -65,11 +70,17 @@ void board_init(void) board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG)); #ifdef GPIO_LED - gpio_function(GPIO_LED, pad_func_0); /* CN2 connector pin 4 */ + gpio_function(GPIO_LED, pad_func_0); gpio_idrive(GPIO_LED, pad_drive_12mA); gpio_dir(GPIO_LED, pad_dir_output); #endif +#ifdef GPIO_BUTTON + gpio_function(GPIO_BUTTON, pad_func_0); + gpio_pull(GPIO_BUTTON, pad_pull_pullup); + gpio_dir(GPIO_BUTTON, pad_dir_input); +#endif + sys_enable(sys_device_timer_wdt); /* Timer A = 1ms */ timer_prescaler(timer_select_a, 1000); @@ -171,9 +182,7 @@ int8_t board_ft9xx_vbus(void) // Turn LED on or off void board_led_write(bool state) { -#if 0 - gpio_write(GPIO_ETH_LED0, state); -#else +#ifdef GPIO_LED gpio_write(GPIO_LED, state); #endif } @@ -182,13 +191,23 @@ void board_led_write(bool state) // a '1' means active (pressed), a '0' means inactive. uint32_t board_button_read(void) { - return 0; + uint32_t state = 0; +#ifdef GPIO_BUTTON + state = gpio_read(GPIO_BUTTON); + state = !state; +#endif + return state; } // Get characters from UART int board_uart_read(uint8_t *buf, int len) { - int r = uart_readn(UART0, (uint8_t *)buf, len); + int r = 0; + + if (uart_rx_has_data(UART0)) + { + r = uart_readn(UART0, (uint8_t *)buf, len); + } return r; } diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 50f7018db..fabe7910b 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -48,6 +48,7 @@ // Board code will determine the state of VBUS from USB host. extern int8_t board_ft9xx_vbus(void); +extern int board_uart_write(void const *buf, int len); // Static array to store an incoming SETUP request for processing by tinyusb. CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN @@ -154,17 +155,24 @@ static uint16_t _ft9xx_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t } else { - uint8_t sr_reg; // If there is data to transmit then wait until the IN buffer // for the endpoint is empty. - do + // This does not apply to interrupt endpoints. + if (ep_xfer[ep_number].type != TUSB_XFER_INTERRUPT) { - sr_reg = USBD_EP_SR_REG(ep_number); - } while (sr_reg & MASK_USBD_EPxSR_INPRDY); - + uint8_t sr_reg; + do + { + sr_reg = USBD_EP_SR_REG(ep_number); + } while (sr_reg & MASK_USBD_EPxSR_INPRDY); + } } - xfer_bytes = _ft9xx_dusb_in(ep_number, (uint8_t *)buffer, xfer_bytes); + // Do not send a ZLP for interrupt endpoints. + if ((ep_xfer[ep_number].type != TUSB_XFER_INTERRUPT) || (xfer_bytes > 0)) + { + xfer_bytes = _ft9xx_dusb_in(ep_number, (uint8_t *)buffer, xfer_bytes); + } if (ep_number == USBD_EP_0) { @@ -749,11 +757,11 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) } // Set the type of this endpoint in the control register. - if (ep_type == USBD_EP_BULK) + if (ep_type == TUSB_XFER_BULK) ep_reg_data |= (USBD_EP_DIS_BULK << BIT_USBD_EP_CONTROL_DIS); - else if (ep_type == USBD_EP_INT) + else if (ep_type == TUSB_XFER_INTERRUPT) ep_reg_data |= (USBD_EP_DIS_INT << BIT_USBD_EP_CONTROL_DIS); - else if (ep_type == USBD_EP_ISOC) + else if (ep_type == TUSB_XFER_ISOCHRONOUS) ep_reg_data |= (USBD_EP_DIS_ISO << BIT_USBD_EP_CONTROL_DIS); // Set the direction of this endpoint in the control register. if (ep_dir == USBD_DIR_IN) @@ -761,7 +769,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) // Do not perform double buffering. //if ( != USBD_DB_OFF) //ep_reg_data |= MASK_USBD_EPxCR_DB; - // Set the control endpoint for this endpoint. + // Set the control register for this endpoint. USBD_EP_CR_REG(ep_number) = ep_reg_data; TU_LOG2("FT9xx endpoint setting %x\r\n", ep_reg_data); } @@ -858,6 +866,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to // Transfer incoming data from an OUT packet to the buffer. xfer_bytes = _ft9xx_edpt_xfer_out(ep_number, buffer, total_bytes); + // Report completion of the transfer. dcd_event_xfer_complete(BOARD_TUD_RHPORT, ep_number /*| TUSB_DIR_OUT_MASK */, xfer_bytes, XFER_RESULT_SUCCESS, false); } -- cgit v1.3.1 From 1437ad1dfb5b48169f680253707821bd9751fc65 Mon Sep 17 00:00:00 2001 From: Gordon McNab Date: Wed, 30 Nov 2022 12:15:27 +0000 Subject: Add endpoint definitions for more example projects. --- examples/device/dynamic_configuration/src/usb_descriptors.c | 13 +++++++++++++ examples/device/msc_dual_lun/src/usb_descriptors.c | 6 ++++++ examples/device/uac2_headset/src/usb_descriptors.c | 6 ++++++ examples/device/webusb_serial/src/usb_descriptors.c | 7 +++++++ 4 files changed, 32 insertions(+) (limited to 'examples/device') diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 457f774d0..092229b99 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -145,6 +145,19 @@ enum #define EPNUM_1_MSC_OUT 0x01 #define EPNUM_1_MSC_IN 0x82 +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_0_CDC_NOTIF 0x81 + #define EPNUM_0_CDC_OUT 0x02 + #define EPNUM_0_CDC_IN 0x83 + + #define EPNUM_0_MIDI_OUT 0x04 + #define EPNUM_0_MIDI_IN 0x85 + + #define EPNUM_1_MSC_OUT 0x01 + #define EPNUM_1_MSC_IN 0x82 + #else #define EPNUM_0_CDC_NOTIF 0x81 #define EPNUM_0_CDC_OUT 0x02 diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index 68a671c91..d8dbb5ce3 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -90,6 +90,12 @@ enum #define EPNUM_MSC_OUT 0x01 #define EPNUM_MSC_IN 0x82 +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_MSC_OUT 0x01 + #define EPNUM_MSC_IN 0x82 + #else #define EPNUM_MSC_OUT 0x01 #define EPNUM_MSC_IN 0x81 diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 10f5cbd27..07c86b903 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -93,6 +93,12 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_AUDIO_IN 0x01 #define EPNUM_AUDIO_OUT 0x02 +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_AUDIO_IN 0x01 + #define EPNUM_AUDIO_OUT 0x02 + #else #define EPNUM_AUDIO_IN 0x01 #define EPNUM_AUDIO_OUT 0x01 diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index cafe2c22b..99f5caaf9 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -97,6 +97,13 @@ enum #define EPNUM_CDC_OUT 3 #define EPNUM_VENDOR_IN 4 #define EPNUM_VENDOR_OUT 5 +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X + // FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_IN 2 + #define EPNUM_CDC_OUT 3 + #define EPNUM_VENDOR_IN 4 + #define EPNUM_VENDOR_OUT 5 #else #define EPNUM_CDC_IN 2 #define EPNUM_CDC_OUT 2 -- cgit v1.3.1 From 6a2cf6728906aa61b44ecfe43b4ceef287b29bf8 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Sun, 4 Dec 2022 13:58:47 +0700 Subject: Fix typos --- .github/ISSUE_TEMPLATE/bug_report.yml | 2 +- docs/contributing/porting.rst | 4 ++-- docs/info/changelog.rst | 22 +++++++++++----------- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_msc_freertos/CMakeLists.txt | 2 +- examples/device/dfu_runtime/src/main.c | 2 +- examples/device/hid_boot_interface/src/main.c | 6 +++--- examples/host/cdc_msc_hid/src/hid_app.c | 2 +- hw/bsp/ansi_escape.h | 2 +- .../led_strip/src/led_strip_rmt_ws2812.c | 2 +- .../led_strip/src/led_strip_rmt_ws2812.c | 2 +- hw/bsp/family_support.cmake | 4 ++-- hw/bsp/gd32vf103/family.c | 2 +- hw/bsp/gd32vf103/system_gd32vf103.c | 2 +- .../evkmimxrt1010_flexspi_nor_config.h | 10 +++++----- .../evkmimxrt1015_flexspi_nor_config.h | 10 +++++----- .../evkmimxrt1020_flexspi_nor_config.h | 10 +++++----- .../evkbimxrt1050_flexspi_nor_config.h | 10 +++++----- .../evkmimxrt1060_flexspi_nor_config.h | 10 +++++----- .../evkmimxrt1064_flexspi_nor_config.h | 10 +++++----- .../boards/teensy_40/teensy40_flexspi_nor_config.h | 10 +++++----- .../boards/teensy_41/teensy41_flexspi_nor_config.h | 10 +++++----- hw/bsp/imxrt/family.mk | 2 +- hw/bsp/lpc54/family.c | 4 ++-- hw/bsp/lpc55/family.c | 4 ++-- hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld | 2 +- hw/bsp/rp2040/family.c | 2 +- .../stm32f070rbnucleo/stm32F070rbtx_flash.ld | 2 +- .../boards/stm32f072disco/STM32F072RBTx_FLASH.ld | 2 +- .../boards/stm32f103_bluepill/STM32F103X8_FLASH.ld | 2 +- .../boards/stm32f103_mini_2/STM32F103XC_FLASH.ld | 2 +- hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld | 2 +- hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld | 2 +- .../feather_stm32f405/STM32F405RGTx_FLASH.ld | 2 +- .../boards/pyboardv11/STM32F405RGTx_FLASH.ld | 2 +- .../stm32f401blackpill/STM32F401VCTx_FLASH.ld | 2 +- hw/bsp/stm32f4/boards/stm32f401blackpill/board.h | 2 +- .../boards/stm32f407disco/STM32F407VGTx_FLASH.ld | 2 +- .../stm32f411blackpill/STM32F411CEUx_FLASH.ld | 2 +- hw/bsp/stm32f4/boards/stm32f411blackpill/board.h | 2 +- .../boards/stm32f411disco/STM32F411VETx_FLASH.ld | 2 +- .../boards/stm32f412disco/STM32F412ZGTx_FLASH.ld | 2 +- .../boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld | 2 +- .../boards/stlinkv3mini/STM32F723xE_FLASH.ld | 2 +- .../boards/stm32f723disco/STM32F723xE_FLASH.ld | 2 +- .../boards/stm32f746disco/STM32F746ZGTx_FLASH.ld | 2 +- .../boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld | 2 +- .../boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld | 2 +- .../boards/stm32f769disco/STM32F769ZITx_FLASH.ld | 2 +- hw/bsp/stm32g4/boards/stm32g474nucleo/board.h | 4 ++-- .../boards/stm32h743eval/stm32h743xx_flash.ld | 2 +- .../boards/stm32h743nucleo/stm32h743xx_flash.ld | 2 +- .../waveshare_openh743i/STM32H743IITX_FLASH.ld | 2 +- hw/bsp/stm32h7/boards/waveshare_openh743i/board.h | 2 +- .../boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld | 2 +- hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld | 2 +- .../boards/stm32l476disco/STM32L476VGTx_FLASH.ld | 2 +- .../boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld | 2 +- hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h | 4 ++-- hw/bsp/tm4c123/family.c | 2 +- lib/SEGGER_RTT/RTT/SEGGER_RTT.c | 2 +- lib/networking/dnserver.c | 8 ++++---- lib/networking/ndis.h | 2 +- lib/networking/rndis_reports.c | 2 +- src/class/cdc/cdc.h | 2 +- src/class/cdc/cdc_rndis_host.c | 2 +- src/class/hid/hid_host.h | 2 +- src/class/msc/msc_host.c | 4 ++-- src/class/msc/msc_host.h | 2 +- src/class/net/ecm_rndis_device.c | 2 +- src/class/usbtmc/usbtmc.h | 2 +- src/class/usbtmc/usbtmc_device.h | 2 +- src/common/tusb_fifo.c | 8 ++++---- src/common/tusb_fifo.h | 4 ++-- src/device/usbd.h | 2 +- src/host/usbh.c | 4 ++-- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 6 +++--- src/portable/ehci/ehci.c | 4 ++-- src/portable/ehci/ehci.h | 10 +++++----- src/portable/espressif/esp32sx/dcd_esp32sx.c | 2 +- src/portable/microchip/pic32mz/usbhs_registers.h | 6 +++--- src/portable/microchip/samx7x/dcd_samx7x.c | 6 +++--- src/portable/nuvoton/nuc505/dcd_nuc505.c | 2 +- src/portable/ohci/ohci.c | 2 +- src/portable/ohci/ohci.h | 2 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 2 +- src/portable/sunxi/dcd_sunxi_musb.c | 2 +- src/portable/sunxi/musb_def.h | 2 +- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- src/portable/synopsys/dwc2/dwc2_stm32.h | 2 +- 90 files changed, 160 insertions(+), 160 deletions(-) (limited to 'examples/device') diff --git a/.github/ISSUE_TEMPLATE/bug_report.yml b/.github/ISSUE_TEMPLATE/bug_report.yml index 2958d3b12..8c39b95e1 100644 --- a/.github/ISSUE_TEMPLATE/bug_report.yml +++ b/.github/ISSUE_TEMPLATE/bug_report.yml @@ -64,7 +64,7 @@ body: placeholder: | Attach your debug log txt file here, where the issue occurred, best with comments to explain the actual events. - Note1: Please DO NOT paste your lengthy log contents here since it hurts the readibility. + Note1: Please DO NOT paste your lengthy log contents here since it hurts the readability. Note2: To enable logging, add `LOG=3` to to the make command if building with stock examples or set `CFG_TUSB_DEBUG=3` in your tusb_config.h. More information can be found at [example's readme](https://github.com/hathach/tinyusb/blob/master/docs/getting_started.md) validations: diff --git a/docs/contributing/porting.rst b/docs/contributing/porting.rst index 7e9e462f0..710af51c3 100644 --- a/docs/contributing/porting.rst +++ b/docs/contributing/porting.rst @@ -195,7 +195,7 @@ Others (like the nRF52) may need each USB packet queued individually. To make th some state for yourself and queue up an intermediate USB packet from the interrupt handler. Once the transaction is going, the interrupt handler will notify TinyUSB of transfer completion. -During transmission, the IN data buffer is guarenteed to remain unchanged in memory until the ``dcd_xfer_complete`` function is called. +During transmission, the IN data buffer is guaranteed to remain unchanged in memory until the ``dcd_xfer_complete`` function is called. The dcd_edpt_xfer function must never add zero-length-packets (ZLP) on its own to a transfer. If a ZLP is required, then it must be explicitly sent by the stack calling dcd_edpt_xfer(), by calling dcd_edpt_xfer() a second time with len=0. @@ -238,4 +238,4 @@ Use `WireShark `_ or `a Beagle PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; CLOCK_DisableClock(kCLOCK_Usbhsl0); /* disable usb0 host clock */ @@ -182,7 +182,7 @@ void board_init(void) // Port1 is High Speed POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); - /*According to reference mannual, device mode setting has to be set by access usb host register */ + /*According to reference manual, device mode setting has to be set by access usb host register */ CLOCK_EnableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ USBHSH->PORTMODE |= USBHSH_PORTMODE_DEV_ENABLE_MASK; CLOCK_DisableClock(kCLOCK_Usbh1); /* enable usb1 host clock */ diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index e7aed5759..5b6c56dd3 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -192,7 +192,7 @@ void board_init(void) CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); - /*According to reference mannual, device mode setting has to be set by access usb host register */ + /*According to reference manual, device mode setting has to be set by access usb host register */ CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock @@ -213,7 +213,7 @@ void board_init(void) RESET_PeripheralReset(kUSB1_RST_SHIFT_RSTn); RESET_PeripheralReset(kUSB1RAM_RST_SHIFT_RSTn); - /* According to reference mannual, device mode setting has to be set by access usb host register */ + /* According to reference manual, device mode setting has to be set by access usb host register */ CLOCK_EnableClock(kCLOCK_Usbh1); // enable usb0 host clock USBHSH->PORTMODE = USBHSH_PORTMODE_SW_PDCOM_MASK; // Put PHY powerdown under software control diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld index d96d6e43d..0b45ee7bd 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld @@ -126,7 +126,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 26008168d..f7ee56990 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -226,6 +226,6 @@ int board_getchar(void) //--------------------------------------------------------------------+ // USB Interrupt Handler -// rp2040 implementation will install approriate handler when initializing +// rp2040 implementation will install appropriate handler when initializing // tinyusb. There is no need to forward IRQ from application //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld index 59e18f375..4a6491510 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld @@ -165,7 +165,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld index 8d31f6a00..f0879e929 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld +++ b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld index ca1804905..c434ca038 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld index da40d1eb2..da637d1b0 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld index 29e387f28..5010435ae 100644 --- a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld +++ b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld index ca9046d29..7f46c71b2 100644 --- a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld +++ b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld @@ -150,7 +150,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld index 57ef61e26..9eb53bcc0 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld @@ -150,7 +150,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld index 57ef61e26..9eb53bcc0 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld @@ -150,7 +150,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld index f51f1ab41..2bc5f6c14 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index 0f820512c..e1fef7277 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -93,7 +93,7 @@ static inline void board_clock_init(void) static inline void board_vbus_sense_init(void) { - // Blackpill doens't use VBUS sense (B device) explicitly disable it + // Blackpill doesn't use VBUS sense (B device) explicitly disable it USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld index c41602720..aac6577ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld @@ -150,7 +150,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld index efea1e067..56dcea605 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index 0f820512c..e1fef7277 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -93,7 +93,7 @@ static inline void board_clock_init(void) static inline void board_vbus_sense_init(void) { - // Blackpill doens't use VBUS sense (B device) explicitly disable it + // Blackpill doesn't use VBUS sense (B device) explicitly disable it USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS; USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSBSEN; USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBUSASEN; diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld index 3a0ce526f..4477229ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld index b00b5dbe0..2372cc1d9 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld index b00b5dbe0..2372cc1d9 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld b/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld index 8645ce5c5..f4be85703 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/STM32F723xE_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld index 8645ce5c5..f4be85703 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f723disco/STM32F723xE_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld index 045ec76f9..eeb0e29f3 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f746disco/STM32F746ZGTx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld index b434a01b7..e1e60bc78 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld index 0b6d5a494..3785f9cbf 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld index 378ed80dd..520a75539 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f769disco/STM32F769ZITx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h index eab0bd5f0..aa2bf20bb 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h @@ -66,7 +66,7 @@ static inline void board_clock_init(void) // Configure the main internal regulator output voltage HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST); - // Initializes the CPU, AHB and APB busses clocks + // Initializes the CPU, AHB and APB buses clocks RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; @@ -79,7 +79,7 @@ static inline void board_clock_init(void) RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; HAL_RCC_OscConfig(&RCC_OscInitStruct); - // Initializes the CPU, AHB and APB busses clocks + // Initializes the CPU, AHB and APB buses clocks RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld index 59b9ff4df..7ee40671c 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld @@ -134,7 +134,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld index 59b9ff4df..7ee40671c 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld @@ -134,7 +134,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld index 73d2dedb2..e99bb977b 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld @@ -138,7 +138,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h index 09442c233..2b072e07c 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h @@ -186,7 +186,7 @@ static inline void timer_board_delay(TIM_HandleTypeDef* tim_hdl, uint32_t ms) static inline void board_stm32h7_post_init(void) { - // walkaround for reseting the ULPI PHY using Timer since systick is not + // walkaround for resetting the ULPI PHY using Timer since systick is not // available when RTOS is used. // Init timer diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld index 1bc16cc7b..dfefe59f1 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld index 787418e09..79427d80b 100644 --- a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld +++ b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld index 98f468ac0..d6865f49d 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld @@ -144,7 +144,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld index f93a16041..f77c72d1b 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld @@ -130,7 +130,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h index f42c7d6dd..ea975df03 100644 --- a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h @@ -59,7 +59,7 @@ static inline void board_clock_init(void) RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - // Initializes the CPU, AHB and APB busses clocks + // Initializes the CPU, AHB and APB buses clocks RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; @@ -72,7 +72,7 @@ static inline void board_clock_init(void) RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV3; HAL_RCC_OscConfig(&RCC_OscInitStruct); - // Initializes the CPU, AHB and APB busses clocks + // Initializes the CPU, AHB and APB buses clocks RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c index b0947d6c4..87b94289b 100644 --- a/hw/bsp/tm4c123/family.c +++ b/hw/bsp/tm4c123/family.c @@ -39,7 +39,7 @@ static void board_uart_init (void) UART0->LCRH = (0x3 << 5); // 8-bit, no parity, 1 stop bit UART0->CC = 0x0; // Configure the UART clock source as system clock - UART0->CTL = (1 << 0) | (1 << 8) | (1 << 9); // UART0 Enable, Transmit Enable, Recieve Enable + UART0->CTL = (1 << 0) | (1 << 8) | (1 << 9); // UART0 Enable, Transmit Enable, Receive Enable } static void initialize_board_led (GPIOA_Type *port, uint8_t PinMsk, uint8_t dirmsk) diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c index 3ad2b1a12..a7ae013dd 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c @@ -1404,7 +1404,7 @@ int SEGGER_RTT_GetKey(void) { * SEGGER_RTT_WaitKey * * Function description -* Waits until at least one character is avaible in the SEGGER RTT buffer. +* Waits until at least one character is available in the SEGGER RTT buffer. * Once a character is available, it is read and this function returns. * * Return value diff --git a/lib/networking/dnserver.c b/lib/networking/dnserver.c index e4e7c3492..539cc2cea 100644 --- a/lib/networking/dnserver.c +++ b/lib/networking/dnserver.c @@ -93,11 +93,11 @@ static uint16_t get_uint16(const uint8_t *pnt) static int parse_next_query(void *data, int size, dns_query_t *query) { int len; - int lables; + int labels; uint8_t *ptr; len = 0; - lables = 0; + labels = 0; ptr = (uint8_t *)data; while (true) @@ -107,7 +107,7 @@ static int parse_next_query(void *data, int size, dns_query_t *query) lable_len = *ptr++; size--; if (lable_len == 0) break; - if (lables > 0) + if (labels > 0) { if (len == DNS_MAX_HOST_NAME_LEN) return -2; query->name[len++] = '.'; @@ -118,7 +118,7 @@ static int parse_next_query(void *data, int size, dns_query_t *query) len += lable_len; ptr += lable_len; size -= lable_len; - lables++; + labels++; } if (size < 4) return -1; diff --git a/lib/networking/ndis.h b/lib/networking/ndis.h index 1c737574c..06258e6bb 100644 --- a/lib/networking/ndis.h +++ b/lib/networking/ndis.h @@ -22,7 +22,7 @@ * ntddndis.h modified by Benedikt Spranger * * Thanks to the cygwin development team, - * espacially to Casper S. Hornstrup + * especially to Casper S. Hornstrup * * THIS SOFTWARE IS NOT COPYRIGHTED * diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index ee611c883..d129466c8 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -220,7 +220,7 @@ static void rndis_handle_set_msg(void) case OID_802_3_MULTICAST_LIST: break; - /* Power Managment: fails for now */ + /* Power Management: fails for now */ case OID_PNP_ADD_WAKE_UP_PATTERN: case OID_PNP_REMOVE_WAKE_UP_PATTERN: case OID_PNP_ENABLE_WAKE_UP: diff --git a/src/class/cdc/cdc.h b/src/class/cdc/cdc.h index e345139ea..c428af865 100644 --- a/src/class/cdc/cdc.h +++ b/src/class/cdc/cdc.h @@ -193,7 +193,7 @@ typedef enum }cdc_management_request_t; //--------------------------------------------------------------------+ -// Management Elemenent Notification (Notification Endpoint) +// Management Element Notification (Notification Endpoint) //--------------------------------------------------------------------+ /// 6.3 Notification Codes diff --git a/src/class/cdc/cdc_rndis_host.c b/src/class/cdc/cdc_rndis_host.c index 8f28f51ac..44de85b45 100644 --- a/src/class/cdc/cdc_rndis_host.c +++ b/src/class/cdc/cdc_rndis_host.c @@ -117,7 +117,7 @@ void rndish_init(void) //------------- Task creation -------------// - //------------- semaphore creation for notificaiton pipe -------------// + //------------- semaphore creation for notification pipe -------------// for(uint8_t i=0; iMSC0CFG = SYS->MSC0CFG | MASK_SYS_MSC0CFG_DEV_RMWAKEUP; - // Atleast 2 ms of delay needed for RESUME Data K state. + // At least 2 ms of delay needed for RESUME Data K state. delayms(2); SYS->MSC0CFG &= ~MASK_SYS_MSC0CFG_DEV_RMWAKEUP; @@ -720,7 +720,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) else total_ram = USBD_RAMTOTAL_OUT; // Work out how much has been allocated to existing endpoints. - // The total RAM allocated shoudl alsyes be a positive number as this + // The total RAM allocated should always be a positive number as this // algorithm should not let it go below zero. for (int i = 1; i < USBD_MAX_ENDPOINT_COUNT; i++) { @@ -976,7 +976,7 @@ void dcd_int_handler(uint8_t rhport) USBD_EP_SR_REG(USBD_EP_0) = MASK_USBD_EP0SR_STALL; } - // Host has sent a SETUP packet. Recieve this into the setup packet store. + // Host has sent a SETUP packet. Receive this into the setup packet store. _ft90x_dusb_out(USBD_EP_0, (uint8_t *)_ft90x_setup_packet, sizeof(USB_device_request)); // Send the packet to tinyusb. diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 76ba2a921..80f616478 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -199,7 +199,7 @@ static void list_remove_qhd_by_addr(ehci_link_t* list_head, uint8_t dev_addr) #pragma GCC diagnostic pop if ( qhd->dev_addr == dev_addr ) { - // TODO deactive all TD, wait for QHD to inactive before removal + // TODO deactivate all TD, wait for QHD to inactive before removal prev->address = qhd->next.address; // EHCI 4.8.2 link the removed qhd to async head (which always reachable by Host Controller) @@ -839,7 +839,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c if (TUSB_SPEED_HIGH == p_qhd->ep_speed) { TU_ASSERT( interval <= 16, ); - if ( interval < 4) // sub milisecond interval + if ( interval < 4) // sub millisecond interval { p_qhd->interval_ms = 0; p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) : diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index ff9ae12e7..36f8649be 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -114,7 +114,7 @@ typedef struct volatile uint32_t current_page : 3 ; ///< Index into the qTD buffer pointer list uint32_t int_on_complete : 1 ; ///< Interrupt on complete volatile uint32_t total_bytes : 15 ; ///< Transfer bytes, decreased during transaction - volatile uint32_t data_toggle : 1 ; ///< Data Toogle bit + volatile uint32_t data_toggle : 1 ; ///< Data Toggle bit /// Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address. The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page @@ -160,7 +160,7 @@ typedef struct TU_ATTR_ALIGNED(32) uint8_t used; uint8_t removing; // removed from asyn list, waiting for async advance uint8_t pid; - uint8_t interval_ms; // polling interval in frames (or milisecond) + uint8_t interval_ms; // polling interval in frames (or millisecond) uint16_t total_xferred_bytes; // number of bytes xferred until a qtd with ioc bit set uint8_t reserved2[2]; @@ -225,7 +225,7 @@ typedef struct TU_ATTR_ALIGNED(32) uint16_t reserved ; ///< reserved // Word 3: siTD Transfer Status and Control - // Status [7:0] TODO indentical to qTD Token'status --> refractor later + // Status [7:0] TODO identical to qTD Token'status --> refactor later volatile uint32_t : 1 ; // reserved volatile uint32_t split_state : 1 ; volatile uint32_t missed_uframe : 1 ; @@ -350,8 +350,8 @@ typedef volatile struct uint32_t periodic_status : 1 ; ///< Periodic schedule status uint32_t async_status : 1 ; ///< Async schedule status uint32_t : 2 ; - uint32_t nxp_int_async : 1 ; ///< NXP customized: This bit is set by the Host Controller when the cause of an interrupt is a completion of a USB transaction where the Transfer Descriptor (TD) has an interrupt on complete (IOC) bit set andthe TD was from the asynchronous schedule. This bit is also set by the Host when a short packet is detected andthe packet is on the asynchronous schedule. - uint32_t nxp_int_period : 1 ; ///< NXP customized: This bit is set by the Host Controller when the cause of an interrupt is a completion of a USB transaction where the Transfer Descriptor (TD) has an interrupt on complete (IOC) bit set andthe TD was from the periodic schedule. + uint32_t nxp_int_async : 1 ; ///< NXP customized: This bit is set by the Host Controller when the cause of an interrupt is a completion of a USB transaction where the Transfer Descriptor (TD) has an interrupt on complete (IOC) bit set and the TD was from the asynchronous schedule. This bit is also set by the Host when a short packet is detected and the packet is on the asynchronous schedule. + uint32_t nxp_int_period : 1 ; ///< NXP customized: This bit is set by the Host Controller when the cause of an interrupt is a completion of a USB transaction where the Transfer Descriptor (TD) has an interrupt on complete (IOC) bit set and the TD was from the periodic schedule. uint32_t : 12 ; }status_bm; }; diff --git a/src/portable/espressif/esp32sx/dcd_esp32sx.c b/src/portable/espressif/esp32sx/dcd_esp32sx.c index 0b75af627..41240f737 100644 --- a/src/portable/espressif/esp32sx/dcd_esp32sx.c +++ b/src/portable/espressif/esp32sx/dcd_esp32sx.c @@ -741,7 +741,7 @@ static void handle_epin_ints(void) // XFER Timeout if (USB0.in_ep_reg[n].diepint & USB_D_TIMEOUT0_M) { - // Clear interrupt or enpoint will hang. + // Clear interrupt or endpoint will hang. USB0.in_ep_reg[n].diepint = USB_D_TIMEOUT0_M; // Maybe retry? } diff --git a/src/portable/microchip/pic32mz/usbhs_registers.h b/src/portable/microchip/pic32mz/usbhs_registers.h index 757e3f083..93b552322 100644 --- a/src/portable/microchip/pic32mz/usbhs_registers.h +++ b/src/portable/microchip/pic32mz/usbhs_registers.h @@ -21,16 +21,16 @@ * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. *******************************************************************************/ /******************************************************************************* - USBHS Peripheral Library Register Defintions + USBHS Peripheral Library Register Definitions File Name: usbhs_registers.h Summary: - USBHS PLIB Register Defintions + USBHS PLIB Register Definitions Description: - This file contains the constants and defintions which are required by the + This file contains the constants and definitions which are required by the the USBHS library. *******************************************************************************/ diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 7507c0f69..24657872b 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -42,7 +42,7 @@ # define USE_SOF 0 #endif -// Dual bank can imporve performance, but need 2 times bigger packet buffer +// Dual bank can improve performance, but need 2 times bigger packet buffer // As SAM7x has only 4KB packet buffer, use with caution ! // Enable in FS mode as packets are smaller #ifndef USE_DUAL_BANK @@ -644,7 +644,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t } __set_PRIMASK(irq_state); - // Here a ZLP has been recieved + // Here a ZLP has been received // and the DMA transfer must be not started. // It is the end of transfer return false; @@ -734,7 +734,7 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 } __set_PRIMASK(irq_state); - // Here a ZLP has been recieved + // Here a ZLP has been received // and the DMA transfer must be not started. // It is the end of transfer return false; diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index 886720e33..3fa7c1ec1 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -181,7 +181,7 @@ static void dcd_userEP_in_xfer(struct xfer_ctl_t *xfer, USBD_EP_T *ep) ep->EPINTEN = USBD_EPINTEN_TXPKIEN_Msk; } - /* provided buffers are thankfully 32-bit aligned, allowing most data to be transfered as 32-bit */ + /* provided buffers are thankfully 32-bit aligned, allowing most data to be transferred as 32-bit */ #if 0 // TODO support dcd_edpt_xfer_fifo API if (xfer->ff) { diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 3e523ebc2..228da6ae0 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -165,7 +165,7 @@ bool hcd_init(uint8_t rhport) //------------- Data Structure init -------------// tu_memclr(&ohci_data, sizeof(ohci_data_t)); for(uint8_t i=0; i<32; i++) - { // assign all interrupt pointes to period head ed + { // assign all interrupt pointers to period head ed ohci_data.hcca.interrupt_table[i] = (uint32_t) &ohci_data.period_head_ed; } diff --git a/src/portable/ohci/ohci.h b/src/portable/ohci/ohci.h index 9fc954c8f..f40ae24cc 100644 --- a/src/portable/ohci/ohci.h +++ b/src/portable/ohci/ohci.h @@ -34,7 +34,7 @@ //--------------------------------------------------------------------+ // OHCI CONFIGURATION & CONSTANTS //--------------------------------------------------------------------+ -#define HOST_HCD_XFER_INTERRUPT // TODO interrupt is used widely, should always be enalbed +#define HOST_HCD_XFER_INTERRUPT // TODO interrupt is used widely, should always be enabled #define OHCI_PERIODIC_LIST (defined HOST_HCD_XFER_INTERRUPT || defined HOST_HCD_XFER_ISOCHRONOUS) // TODO merge OHCI with EHCI diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index c88a8a3a2..54c3c95e7 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -122,7 +122,7 @@ (TU_CHECK_MCU(OPT_MCU_STM32L4) && defined(STM32L4_FSDEV)) \ ) -// In order to reduce the dependance on HAL, we undefine this. +// In order to reduce the dependence on HAL, we undefine this. // Some definitions are copied to our private include file. #undef USE_HAL_DRIVER diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index a0be846a5..2d0e379ad 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -243,7 +243,7 @@ static void USBC_Dev_SetAddress(u8 address) static void __USBC_Dev_Tx_SendStall(void) { - //send stall, and fifo is flushed automaticly + //send stall, and fifo is flushed automatically USBC_REG_set_bit_w(USBC_BP_TXCSR_D_SEND_STALL, USBC_REG_TXCSR(USBC0_BASE)); } static u32 __USBC_Dev_Tx_IsEpStall(void) diff --git a/src/portable/sunxi/musb_def.h b/src/portable/sunxi/musb_def.h index 602b4f113..53da5ded2 100644 --- a/src/portable/sunxi/musb_def.h +++ b/src/portable/sunxi/musb_def.h @@ -93,7 +93,7 @@ #define USBC1_BASE 0x01c14000 #define USBC2_BASE 0x01c1E000 -//Some reg whithin musb +//Some reg within musb #define USBPHY_CLK_REG 0x01c200CC #define USBPHY_CLK_RST_BIT 0 #define USBPHY_CLK_GAT_BIT 1 diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f5ecdfe4f..b53735a5e 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1003,7 +1003,7 @@ static void handle_rxflvl_irq(uint8_t rhport) switch ( pktsts ) { - // Global OUT NAK: do nothign + // Global OUT NAK: do nothing case GRXSTS_PKTSTS_GLOBALOUTNAK: break; case GRXSTS_PKTSTS_SETUPRX: diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index ea786362e..b63d1fcd0 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -116,7 +116,7 @@ static const dwc2_controller_t _dwc2_controller[] = // //--------------------------------------------------------------------+ -// SystemCoreClock is alrady included by family header +// SystemCoreClock is already included by family header // extern uint32_t SystemCoreClock; TU_ATTR_ALWAYS_INLINE -- cgit v1.3.1 From 43b255f413e08b9e567a23b24701efbdaebcb824 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 4 Dec 2022 18:51:52 +0700 Subject: more typos --- docs/contributing/index.rst | 2 +- examples/device/hid_generic_inout/hid_test.py | 4 ++-- hw/bsp/gd32vf103/family.c | 2 +- hw/bsp/sltb009a/sltb009a.c | 2 +- hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld | 4 ++-- hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld | 2 +- hw/bsp/stm32u5/boards/stm32u575eval/board.h | 4 ++-- src/class/hid/hid_device.h | 2 +- src/class/usbtmc/usbtmc_device.c | 2 +- src/portable/dialog/da146xx/dcd_da146xx.c | 2 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 2 +- src/portable/renesas/usba/hcd_usba.c | 2 +- src/portable/valentyusb/eptri/dcd_eptri.c | 2 +- 13 files changed, 16 insertions(+), 16 deletions(-) (limited to 'examples/device') diff --git a/docs/contributing/index.rst b/docs/contributing/index.rst index c572894ad..7ff79cb32 100644 --- a/docs/contributing/index.rst +++ b/docs/contributing/index.rst @@ -6,7 +6,7 @@ Contributing can be highly rewarding, but it can also be frustrating at times. It takes time to review patches, and as this is an open source project, that sometimes can take a while. The reviewing process depends on the availability of the maintainers, who may not be always available. Please try to be -understanding throught the process. +understanding through the process. There a few guidelines you need to keep in mind when contributing. Please have a look at them as that will make the contribution process easier for all diff --git a/examples/device/hid_generic_inout/hid_test.py b/examples/device/hid_generic_inout/hid_test.py index 21fd3f421..5bdba9db0 100644 --- a/examples/device/hid_generic_inout/hid_test.py +++ b/examples/device/hid_generic_inout/hid_test.py @@ -13,8 +13,8 @@ for vid in USB_VID: if dev: while True: # Get input from console and encode to UTF8 for array of chars. - # hid generic inout is single report therefore by HIDAPI requirement - # it must be preceeded with 0x00 as dummy reportID + # hid generic in/out is single report therefore by HIDAPI requirement + # it must be preceded, with 0x00 as dummy reportID str_out = b'\x00' str_out += input("Send text to HID Device : ").encode('utf-8') dev.write(str_out) diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 5427c8dd0..60a326d27 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -112,7 +112,7 @@ void board_init(void) { otg_core_regs->GCCFG &= ~GCCFG_VBUSIG; #endif - /* Enable interrupts globaly */ + /* Enable interrupts globally */ __enable_irq(); } diff --git a/hw/bsp/sltb009a/sltb009a.c b/hw/bsp/sltb009a/sltb009a.c index b929adb13..b5eb5ed5d 100644 --- a/hw/bsp/sltb009a/sltb009a.c +++ b/hw/bsp/sltb009a/sltb009a.c @@ -397,7 +397,7 @@ void cmu_init(void) CMU->HFCLKSEL = CMU_HFCLKSEL_HF_HFXO; while((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) != CMU_HFCLKSTATUS_SELECTED_HFXO); - // Calibrate HFRCO for 72MHz and enable tunning by PLL + // Calibrate HFRCO for 72MHz and enable tuning by PLL cmu_hfrco_calib((DEVINFO->HFRCOCAL16) | CMU_HFRCOCTRL_FINETUNINGEN); // Setup the PLL diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld index 935d97c87..9c327483b 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld @@ -16,7 +16,7 @@ ** ** Target : STMicroelectronics STM32 ** -** Distribution: The file is distributed “as is,” without any warranty +** Distribution: The file is distributed �as is,� without any warranty ** of any kind. ** ***************************************************************************** @@ -151,7 +151,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld index 28cd96131..d4b86b3e3 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld @@ -145,7 +145,7 @@ SECTIONS . = ALIGN(4); .bss : { - /* This is used by the startup in order to initialize the .bss secion */ + /* This is used by the startup in order to initialize the .bss section */ _sbss = .; /* define a global symbol at bss start */ __bss_start__ = _sbss; *(.bss) diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.h b/hw/bsp/stm32u5/boards/stm32u575eval/board.h index 5c348b812..5562b95a8 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h @@ -69,7 +69,7 @@ static inline void board_clock_init(void) */ HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); - /** Initializes the CPU, AHB and APB busses clocks + /** Initializes the CPU, AHB and APB buses clocks */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI; RCC_OscInitStruct.HSIState = RCC_HSI_ON; @@ -92,7 +92,7 @@ static inline void board_clock_init(void) HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); - /** Initializes the CPU, AHB and APB busses clocks + /** Initializes the CPU, AHB and APB buses clocks */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; diff --git a/src/class/hid/hid_device.h b/src/class/hid/hid_device.h index 3143b1024..fa41ebf8a 100644 --- a/src/class/hid/hid_device.h +++ b/src/class/hid/hid_device.h @@ -182,7 +182,7 @@ static inline bool tud_hid_gamepad_report(uint8_t report_id, int8_t x, int8_t y HID_COLLECTION ( HID_COLLECTION_APPLICATION ) ,\ /* Report ID if any */\ __VA_ARGS__ \ - /* 8 bits Modifier Keys (Shfit, Control, Alt) */ \ + /* 8 bits Modifier Keys (Shift, Control, Alt) */ \ HID_USAGE_PAGE ( HID_USAGE_PAGE_KEYBOARD ) ,\ HID_USAGE_MIN ( 224 ) ,\ HID_USAGE_MAX ( 231 ) ,\ diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index af4a92732..0f6d3f60d 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -599,7 +599,7 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request // At this point, a transfer MAY be in progress. Based on USB spec, when clearing bulk EP HALT, // the EP transfer buffer needs to be cleared and DTOG needs to be reset, even if - // the EP is not halted. The only USBD API interface to do this is to stall and then unstall the EP. + // the EP is not halted. The only USBD API interface to do this is to stall and then un-stall the EP. if(ep_addr == usbtmc_state.ep_bulk_out) { criticalEnter(); diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c index 0bb8b6e41..961da81d6 100644 --- a/src/portable/dialog/da146xx/dcd_da146xx.c +++ b/src/portable/dialog/da146xx/dcd_da146xx.c @@ -243,7 +243,7 @@ static struct // Converts xfer pointer to epnum (0,1,2,3) regardless of xfer direction #define XFER_EPNUM(xfer) ((xfer - &_dcd.xfer_status[0][0]) >> 1) -// Converts xfer pinter to EPx_REGS pointer (returns same pointer for IN and OUT with same endpoint number) +// Converts xfer pointer to EPx_REGS pointer (returns same pointer for IN and OUT with same endpoint number) #define XFER_REGS(xfer) ep_regs[XFER_EPNUM(xfer)] // Converts epnum (0,1,2,3) to EPx_REGS pointer #define EPNUM_REGS(epnum) ep_regs[epnum] diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index ca37d799f..afc14b010 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -170,7 +170,7 @@ static void xact_out_dma(uint8_t epnum) uint32_t xact_len; // DMA can't be active during read of SIZE.EPOUT or SIZE.ISOOUT, so try to lock, - // If already running deffer call regardless if it was called from ISR or task, + // If already running defer call regardless if it was called from ISR or task, if ( atomic_flag_test_and_set(&_dcd.dma_running) ) { usbd_defer_func((osal_task_func_t)xact_out_dma_wrapper, (void *)(uint32_t)epnum, is_in_isr()); diff --git a/src/portable/renesas/usba/hcd_usba.c b/src/portable/renesas/usba/hcd_usba.c index 5246ecb94..18cd5f148 100644 --- a/src/portable/renesas/usba/hcd_usba.c +++ b/src/portable/renesas/usba/hcd_usba.c @@ -600,7 +600,7 @@ uint32_t hcd_frame_number(uint8_t rhport) bool hcd_port_connect_status(uint8_t rhport) { (void)rhport; - return USB0.INTSTS1.BIT.ATTCH ? true: false; + return USB0.INTSTS1.BIT.ATTCH ? true : false; } void hcd_port_reset(uint8_t rhport) diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c index e368b5f39..a3f228dd9 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.c +++ b/src/portable/valentyusb/eptri/dcd_eptri.c @@ -465,7 +465,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) enable = 1; usb_out_ctrl_write((0 << CSR_USB_OUT_CTRL_STALL_OFFSET) | (enable << CSR_USB_OUT_CTRL_ENABLE_OFFSET) | tu_edpt_number(ep_addr)); } - // IN endpoints will get unstalled when more data is written. + // IN endpoints will get un-stalled when more data is written. } bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) -- cgit v1.3.1 From de5a67bf3b8737a580539c5fbc6a054c90e4a084 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 5 Dec 2022 12:09:41 +0700 Subject: clean osal_freertos, update freertos examples to work with configSUPPORT_DYNAMIC_ALLOCATION only note: for example to build with configSUPPORT_STATIC_ALLOCATION = 0, one of heap_n.c must be included in makefile/cmake --- examples/device/cdc_msc_freertos/Makefile | 11 ++- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- examples/device/cdc_msc_freertos/src/main.c | 24 ++++--- examples/device/hid_composite_freertos/Makefile | 11 ++- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 7 +- examples/device/hid_composite_freertos/src/main.c | 24 ++++--- src/osal/osal_freertos.h | 84 +++++++++++----------- src/portable/ehci/ehci.c | 2 +- 8 files changed, 100 insertions(+), 65 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 3352dd37d..ff4b41108 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -29,8 +29,15 @@ SRC_C += \ $(FREERTOS_SRC)/timers.c \ $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) -# Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 +# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c +# CFLAGS += -Wno-error=sign-compare + +# Suppress FreeRTOSConfig.h warnings +CFLAGS += -Wno-error=redundant-decls + +# Suppress FreeRTOS source warnings +CFLAGS += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 6a3630dbc..968c59749 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -69,7 +69,7 @@ #define configTICK_RATE_HZ ( 1000 ) #define configMAX_PRIORITIES ( 5 ) #define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( 0*1024 ) // dynamic is not used +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) #define configMAX_TASK_NAME_LEN 16 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 755220c13..cfb14aa2b 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -51,6 +51,8 @@ #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif +#define CDC_STACK_SZIE configMINIMAL_STACK_SIZE + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ @@ -66,19 +68,18 @@ enum { BLINK_SUSPENDED = 2500, }; -// static timer +// static timer & task +#if configSUPPORT_STATIC_ALLOCATION StaticTimer_t blinky_tmdef; -TimerHandle_t blinky_tm; -// static task StackType_t usb_device_stack[USBD_STACK_SIZE]; StaticTask_t usb_device_taskdef; -// static task for cdc -#define CDC_STACK_SZIE configMINIMAL_STACK_SIZE StackType_t cdc_stack[CDC_STACK_SZIE]; StaticTask_t cdc_taskdef; +#endif +TimerHandle_t blinky_tm; void led_blinky_cb(TimerHandle_t xTimer); void usb_device_task(void* param); @@ -92,15 +93,22 @@ int main(void) { board_init(); +#if configSUPPORT_STATIC_ALLOCATION // soft timer for blinky blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); - xTimerStart(blinky_tm, 0); // Create a task for tinyusb device stack - (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); // Create CDC task - (void) xTaskCreateStatic( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + xTaskCreateStatic(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); +#else + blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb); + xTaskCreate( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); + xTaskCreate( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); +#endif + + xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index 6c8c43ddd..9c66b896d 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -28,8 +28,15 @@ SRC_C += \ $(FREERTOS_SRC)/timers.c \ $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) -# Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +# include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 +# SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c +# CFLAGS += -Wno-error=sign-compare + +# Suppress FreeRTOSConfig.h warnings +CFLAGS += -Wno-error=redundant-decls + +# Suppress FreeRTOS source warnings +CFLAGS += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index bfdf1e926..968c59749 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -46,13 +46,14 @@ #include "bsp/board_mcu.h" #if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 -#error "ESP32-Sx should use IDF's FreeRTOSConfig.h" + #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" #endif +// TODO fix later #if CFG_TUSB_MCU == OPT_MCU_MM32F327X - // TODO fix/remove later extern u32 SystemCoreClock; #else + // FIXME cause redundant-decls warnings extern uint32_t SystemCoreClock; #endif @@ -68,7 +69,7 @@ #define configTICK_RATE_HZ ( 1000 ) #define configMAX_PRIORITIES ( 5 ) #define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( 0*1024 ) // dynamic is not used +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) #define configMAX_TASK_NAME_LEN 16 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index b67c10937..fb0d69258 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -53,6 +53,8 @@ #define USBD_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif +#define HID_STACK_SZIE configMINIMAL_STACK_SIZE + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ @@ -68,19 +70,18 @@ enum { BLINK_SUSPENDED = 2500, }; -// static timer +// static timer & task +#if configSUPPORT_STATIC_ALLOCATION StaticTimer_t blinky_tmdef; -TimerHandle_t blinky_tm; -// static task StackType_t usb_device_stack[USBD_STACK_SIZE]; StaticTask_t usb_device_taskdef; -// static task for hid -#define HID_STACK_SZIE configMINIMAL_STACK_SIZE StackType_t hid_stack[HID_STACK_SZIE]; StaticTask_t hid_taskdef; +#endif +TimerHandle_t blinky_tm; void led_blinky_cb(TimerHandle_t xTimer); void usb_device_task(void* param); @@ -94,15 +95,22 @@ int main(void) { board_init(); +#if configSUPPORT_STATIC_ALLOCATION // soft timer for blinky blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); - xTimerStart(blinky_tm, 0); // Create a task for tinyusb device stack - (void) xTaskCreateStatic( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); // Create HID task - (void) xTaskCreateStatic( hid_task, "hid", HID_STACK_SZIE, NULL, configMAX_PRIORITIES-2, hid_stack, &hid_taskdef); + xTaskCreateStatic(hid_task, "hid", HID_STACK_SZIE, NULL, configMAX_PRIORITIES-2, hid_stack, &hid_taskdef); +#else + blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb); + xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); + xTaskCreate(hid_task, "hid", HID_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); +#endif + + xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index ccb98cc99..327aa9970 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -37,6 +37,43 @@ extern "C" { #endif +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +#if configSUPPORT_STATIC_ALLOCATION + typedef StaticSemaphore_t osal_semaphore_def_t; + typedef StaticSemaphore_t osal_mutex_def_t; +#else + // not used therefore defined to smallest possible type to save space + typedef uint8_t osal_semaphore_def_t; + typedef uint8_t osal_mutex_def_t; +#endif + +typedef SemaphoreHandle_t osal_semaphore_t; +typedef SemaphoreHandle_t osal_mutex_t; + +// _int_set is not used with an RTOS +#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ + static _type _name##_##buf[_depth];\ + osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf }; + +typedef struct +{ + uint16_t depth; + uint16_t item_sz; + void* buf; +#if configSUPPORT_STATIC_ALLOCATION + StaticQueue_t sq; +#endif +}osal_queue_def_t; + +typedef QueueHandle_t osal_queue_t; + +//--------------------------------------------------------------------+ +// TASK API +//--------------------------------------------------------------------+ + TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) { if (msec == OSAL_TIMEOUT_WAIT_FOREVER) return portMAX_DELAY; @@ -51,9 +88,6 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) return ticks; } -//--------------------------------------------------------------------+ -// TASK API -//--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { vTaskDelay( pdMS_TO_TICKS(msec) ); @@ -62,19 +96,13 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) //--------------------------------------------------------------------+ // Semaphore API //--------------------------------------------------------------------+ -#if configSUPPORT_STATIC_ALLOCATION == 1 -typedef StaticSemaphore_t osal_semaphore_def_t; -#else -typedef SemaphoreHandle_t osal_semaphore_def_t; -#endif -typedef SemaphoreHandle_t osal_semaphore_t; TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef) { -#if configSUPPORT_STATIC_ALLOCATION == 1 +#if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateBinaryStatic(semdef); #else - (void)(semdef); + (void) semdef; return xSemaphoreCreateBinary(); #endif } @@ -101,7 +129,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t se } } -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait (osal_semaphore_t sem_hdl, uint32_t msec) +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { return xSemaphoreTake(sem_hdl, _osal_ms2tick(msec)); } @@ -114,25 +142,18 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t c //--------------------------------------------------------------------+ // MUTEX API (priority inheritance) //--------------------------------------------------------------------+ -#if configSUPPORT_STATIC_ALLOCATION == 1 -typedef StaticSemaphore_t osal_mutex_def_t; -#else -typedef SemaphoreHandle_t osal_mutex_def_t; -#endif -typedef SemaphoreHandle_t osal_mutex_t; TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef) { -#if configSUPPORT_STATIC_ALLOCATION == 1 +#if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateMutexStatic(mdef); #else - (void)(mdef); + (void) mdef; return xSemaphoreCreateMutex(); #endif - } -TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock (osal_mutex_t mutex_hdl, uint32_t msec) +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock(osal_mutex_t mutex_hdl, uint32_t msec) { return osal_semaphore_wait(mutex_hdl, msec); } @@ -146,26 +167,9 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd // QUEUE API //--------------------------------------------------------------------+ -// _int_set is not used with an RTOS -#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ - static _type _name##_##buf[_depth];\ - osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf }; - -typedef struct -{ - uint16_t depth; - uint16_t item_sz; - void* buf; -#if configSUPPORT_STATIC_ALLOCATION == 1 - StaticQueue_t sq; -#endif -}osal_queue_def_t; - -typedef QueueHandle_t osal_queue_t; - TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { -#if configSUPPORT_STATIC_ALLOCATION == 1 +#if configSUPPORT_STATIC_ALLOCATION return xQueueCreateStatic(qdef->depth, qdef->item_sz, (uint8_t*) qdef->buf, &qdef->sq); #else return xQueueCreate(qdef->depth, qdef->item_sz); diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 361015964..76ba2a921 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -193,7 +193,7 @@ static void list_remove_qhd_by_addr(ehci_link_t* list_head, uint8_t dev_addr) { // TODO check type for ISO iTD and siTD // TODO Suppress cast-align warning - #pragma GCC diagnostic push + #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wcast-align" ehci_qhd_t* qhd = (ehci_qhd_t*) list_next(prev); #pragma GCC diagnostic pop -- cgit v1.3.1 From 8a1184e7b3092d96325f7e252b527d3d0755c727 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Thu, 29 Dec 2022 14:17:43 +0100 Subject: Minor audio_test example fix. Fix CFG_TUD_AUDIO_EP_SZ_IN size. --- examples/device/audio_test/src/main.c | 6 +++--- examples/device/audio_test/src/plot_audio_samples.py | 4 ++++ examples/device/audio_test/src/tusb_config.h | 2 +- 3 files changed, 8 insertions(+), 4 deletions(-) (limited to 'examples/device') diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index d0849c7ac..56961e427 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -71,7 +71,7 @@ audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data -uint16_t test_buffer_audio[CFG_TUD_AUDIO_EP_SZ_IN/2]; +uint16_t test_buffer_audio[(CFG_TUD_AUDIO_EP_SZ_IN - 2) / 2]; uint16_t startVal = 0; void led_blinking_task(void); @@ -400,7 +400,7 @@ bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, u (void) ep_in; (void) cur_alt_setting; - tud_audio_write ((uint8_t *)test_buffer_audio, CFG_TUD_AUDIO_EP_SZ_IN); + tud_audio_write ((uint8_t *)test_buffer_audio, CFG_TUD_AUDIO_EP_SZ_IN - 2); return true; } @@ -413,7 +413,7 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin (void) ep_in; (void) cur_alt_setting; - for (size_t cnt = 0; cnt < CFG_TUD_AUDIO_EP_SZ_IN/2; cnt++) + for (size_t cnt = 0; cnt < (CFG_TUD_AUDIO_EP_SZ_IN - 2) / 2; cnt++) { test_buffer_audio[cnt] = startVal++; } diff --git a/examples/device/audio_test/src/plot_audio_samples.py b/examples/device/audio_test/src/plot_audio_samples.py index 6e3c4978e..2303df3d0 100644 --- a/examples/device/audio_test/src/plot_audio_samples.py +++ b/examples/device/audio_test/src/plot_audio_samples.py @@ -2,6 +2,7 @@ import sounddevice as sd import matplotlib.pyplot as plt import numpy as np import platform +import csv if __name__ == '__main__': @@ -31,4 +32,7 @@ if __name__ == '__main__': plt.ylabel('Amplitude') plt.title('MicNode') plt.show() + + samples = np.array(myrecording) + np.savetxt('Output.csv', samples, delimiter=",", fmt='%s') \ No newline at end of file diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 355ed1011..9f38612a9 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -114,7 +114,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_EP_SZ_IN 48 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x 1 Channel +#define CFG_TUD_AUDIO_EP_SZ_IN (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - One extra sample is needed for asynchronous transfer adjustment, see feedback EP #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN + 1 -- cgit v1.3.1 From 7ff2f43bfd9a9dd36b3c3aadcd0362db509b367c Mon Sep 17 00:00:00 2001 From: Mengsk Date: Fri, 30 Dec 2022 15:09:50 +0100 Subject: Add multi-rate audio test example for new ISO buffer allocation. --- examples/device/CMakeLists.txt | 1 + .../device/audio_test_multi_rate/CMakeLists.txt | 28 ++ examples/device/audio_test_multi_rate/Makefile | 12 + examples/device/audio_test_multi_rate/skip.txt | 3 + examples/device/audio_test_multi_rate/src/main.c | 521 +++++++++++++++++++++ .../src/plot_audio_samples.py | 38 ++ .../device/audio_test_multi_rate/src/tusb_config.h | 141 ++++++ .../audio_test_multi_rate/src/usb_descriptors.c | 169 +++++++ .../audio_test_multi_rate/src/usb_descriptors.h | 102 ++++ 9 files changed, 1015 insertions(+) create mode 100644 examples/device/audio_test_multi_rate/CMakeLists.txt create mode 100644 examples/device/audio_test_multi_rate/Makefile create mode 100644 examples/device/audio_test_multi_rate/skip.txt create mode 100644 examples/device/audio_test_multi_rate/src/main.c create mode 100644 examples/device/audio_test_multi_rate/src/plot_audio_samples.py create mode 100644 examples/device/audio_test_multi_rate/src/tusb_config.h create mode 100644 examples/device/audio_test_multi_rate/src/usb_descriptors.c create mode 100644 examples/device/audio_test_multi_rate/src/usb_descriptors.h (limited to 'examples/device') diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index edf5ab805..5520209e0 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -8,6 +8,7 @@ family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR}) # family_add_subdirectory will filter what to actually add based on selected FAMILY family_add_subdirectory(audio_4_channel_mic) family_add_subdirectory(audio_test) +family_add_subdirectory(audio_test_multi_rate) family_add_subdirectory(board_test) family_add_subdirectory(cdc_dual_ports) family_add_subdirectory(cdc_msc) diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt new file mode 100644 index 000000000..cb321f9a8 --- /dev/null +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -0,0 +1,28 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT}) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c +) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src +) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/Makefile b/examples/device/audio_test_multi_rate/Makefile new file mode 100644 index 000000000..5a455078e --- /dev/null +++ b/examples/device/audio_test_multi_rate/Makefile @@ -0,0 +1,12 @@ +include ../../../tools/top.mk +include ../../make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../rules.mk diff --git a/examples/device/audio_test_multi_rate/skip.txt b/examples/device/audio_test_multi_rate/skip.txt new file mode 100644 index 000000000..ae9b57f1f --- /dev/null +++ b/examples/device/audio_test_multi_rate/skip.txt @@ -0,0 +1,3 @@ +mcu:SAMD11 +mcu:SAME5X +mcu:SAMG \ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c new file mode 100644 index 000000000..e4d2d0253 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -0,0 +1,521 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Reinhard Panhuber + * Copyright (c) 2022 HiFiPhile + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* plot_audio_samples.py requires following modules: + * $ sudo apt install libportaudio + * $ pip3 install sounddevice matplotlib + * + * Then run + * $ python3 plot_audio_samples.py + */ + +#include +#include +#include + +#include "bsp/board.h" +#include "tusb.h" +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +// Audio controls +// Current states +bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +uint32_t sampFreq; +uint8_t bytesPerSample; +uint8_t clkValid; + +// Range states +// List of supported sample rates +static const uint32_t sampleRatesList[] = +{ + 32000, 48000, 96000 +}; + +#define N_sampleRates TU_ARRAY_SIZE(sampleRatesList) + +// Bytes per format of every Alt settings +static const uint8_t bytesPerSampleAltList[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = +{ + CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, + CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, +}; + +audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state + + +// Audio test data +CFG_TUSB_MEM_ALIGN uint8_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; +uint16_t startVal = 0; + +void led_blinking_task(void); +void audio_task(void); + +/*------------- MAIN -------------*/ +int main(void) +{ + board_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); + + // Init values + sampFreq = sampleRatesList[0]; + clkValid = 1; + + while (1) + { + tud_task(); // tinyusb device task + led_blinking_task(); + audio_task(); + } + + + return 0; +} + +//--------------------------------------------------------------------+ +// Device callbacks +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) +{ + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) +{ + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) +{ + blink_interval_ms = BLINK_MOUNTED; +} + +//--------------------------------------------------------------------+ +// AUDIO Task +//--------------------------------------------------------------------+ + +void audio_task(void) +{ + // Yet to be filled - e.g. put meas data into TX FIFOs etc. + // asm("nop"); +} + +//--------------------------------------------------------------------+ +// Application Callback API Implementations +//--------------------------------------------------------------------+ + +// Invoked when set interface is called, typically on start/stop streaming or format change +bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void)rhport; + //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + // Clear buffer when streaming format is changed + if(alt != 0) + { + bytesPerSample = bytesPerSampleAltList[alt-1]; + } + return true; +} + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an interface +bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + (void) pBuff; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + (void) itf; + + // We do not support any set range requests here, only current value requests + TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + + // If request is for our feature unit + if ( entityID == UAC2_ENTITY_FEATURE_UNIT ) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Request uses format layout 1 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + + mute[channelNum] = ((audio_control_cur_1_t*) pBuff)->bCur; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + case AUDIO_FU_CTRL_VOLUME: + // Request uses format layout 2 + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + // Clock Source unit + if ( entityID == UAC2_ENTITY_CLOCK ) + { + switch ( ctrlSel ) + { + case AUDIO_CS_CTRL_SAM_FREQ: + TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_4_t)); + + sampFreq = ((audio_control_cur_4_t *)pBuff)->bCur; + + TU_LOG2("Clock set current freq: %d\r\n", sampFreq); + + return true; + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t ep = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) ep; + + // return tud_control_xfer(rhport, p_request, &tmp, 1); + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an interface +bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t itf = TU_U16_LOW(p_request->wIndex); + + (void) channelNum; (void) ctrlSel; (void) itf; + + return false; // Yet not implemented +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + + // Page 91 in UAC2 specification + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + // uint8_t itf = TU_U16_LOW(p_request->wIndex); // Since we have only one audio function implemented, we do not need the itf value + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // Input terminal (Microphone input) + if (entityID == UAC2_ENTITY_INPUT_TERMINAL) + { + switch ( ctrlSel ) + { + case AUDIO_TE_CTRL_CONNECTOR: + { + // The terminal connector control only has a get request with only the CUR attribute. + audio_desc_channel_cluster_t ret; + + // Those are dummy values for now + ret.bNrChannels = 1; + ret.bmChannelConfig = 0; + ret.iChannelNames = 0; + + TU_LOG2(" Get terminal connector\r\n"); + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + } + break; + + // Unknown/Unsupported control selector + default: + TU_BREAKPOINT(); + return false; + } + } + + // Feature unit + if (entityID == UAC2_ENTITY_FEATURE_UNIT) + { + switch ( ctrlSel ) + { + case AUDIO_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO_FU_CTRL_VOLUME: + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); + + case AUDIO_CS_REQ_RANGE: + TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); + + // Copy values - only for testing - better is version below + audio_control_range_2_n_t(1) + ret; + + ret.wNumSubRanges = 1; + ret.subrange[0].bMin = -90; // -90 dB + ret.subrange[0].bMax = 30; // +30 dB + ret.subrange[0].bRes = 1; // 1 dB steps + + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, (void*) &ret, sizeof(ret)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + // Clock Source unit + if ( entityID == UAC2_ENTITY_CLOCK ) + { + switch ( ctrlSel ) + { + case AUDIO_CS_CTRL_SAM_FREQ: + // channelNum is always zero in this case + switch ( p_request->bRequest ) + { + case AUDIO_CS_REQ_CUR: + TU_LOG2(" Get Sample Freq.\r\n"); + return tud_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); + + case AUDIO_CS_REQ_RANGE: + { + TU_LOG2(" Get Sample Freq. range\r\n"); + audio_control_range_4_n_t(N_sampleRates) rangef = + { + .wNumSubRanges = tu_htole16(N_sampleRates) + }; + TU_LOG1("Clock get %d freq ranges\r\n", N_sampleRates); + for(uint8_t i = 0; i < N_sampleRates; i++) + { + rangef.subrange[i].bMin = sampleRatesList[i]; + rangef.subrange[i].bMax = sampleRatesList[i]; + rangef.subrange[i].bRes = 0; + TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); + } + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &rangef, sizeof(rangef)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + case AUDIO_CS_CTRL_CLK_VALID: + // Only cur attribute exists for this request + TU_LOG2(" Get Sample Freq. valid\r\n"); + return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + TU_LOG2(" Unsupported entity: %d\r\n", entityID); + return false; // Yet not implemented +} + +bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + tud_audio_write ((uint8_t *)test_buffer_audio, sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000) * bytesPerSample); + + return true; +} + +bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uint8_t itf, uint8_t ep_in, uint8_t cur_alt_setting) +{ + (void) rhport; + (void) n_bytes_copied; + (void) itf; + (void) ep_in; + (void) cur_alt_setting; + + // 16bit + if(bytesPerSample == 2) + { + uint16_t* pData_16 = (uint16_t*)test_buffer_audio; + for (size_t cnt = 0; cnt < sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000); cnt++) + { + pData_16[cnt] = startVal++; + } + } + // 24bit in 32bit slot + else if(bytesPerSample == 4) + { + uint32_t* pData_32 = (uint32_t*)test_buffer_audio; + for (size_t cnt = 0; cnt < sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000); cnt++) + { + pData_32[cnt] = (uint32_t)startVal++ << 16U; + } + } + + return true; +} + +bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request) +{ + (void) rhport; + (void) p_request; + startVal = 0; + + return true; +} + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +void led_blinking_task(void) +{ + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py new file mode 100644 index 000000000..4a5f15a9c --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py @@ -0,0 +1,38 @@ +import sounddevice as sd +import matplotlib.pyplot as plt +import numpy as np +import platform +import csv + +if __name__ == '__main__': + + # If you got "ValueError: No input device matching", that is because your PC name example device + # differently from tested list below. Uncomment the next line to see full list and try to pick correct one + # print(sd.query_devices()) + + fs = 96000 # Sample rate + duration = 100e-3 # Duration of recording + + if platform.system() == 'Windows': + # MME is needed since there are more than one MicNode device APIs (at least in Windows) + device = 'Microphone (MicNode) MME' + elif platform.system() == 'Darwin': + device = 'MicNode' + else: + device ='default' + + myrecording = sd.rec(int(duration * fs), samplerate=fs, channels=1, dtype='int16', device=device) + print('Waiting...') + sd.wait() # Wait until recording is finished + print('Done!') + + time = np.arange(0, duration, 1 / fs) # time vector + plt.plot(time, myrecording) + plt.xlabel('Time [s]') + plt.ylabel('Amplitude') + plt.title('MicNode') + plt.show() + + samples = np.array(myrecording) + np.savetxt('Output.csv', samples, delimiter=",", fmt='%s') + \ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h new file mode 100644 index 000000000..d8b6511d6 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -0,0 +1,141 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "usb_descriptors.h" + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +// #define CFG_TUSB_DEBUG 0 + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_AUDIO 1 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 + +//-------------------------------------------------------------------- +// AUDIO CLASS DRIVER CONFIGURATION +//-------------------------------------------------------------------- + +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 96000 + +// How many formats are used, need to adjust USB descriptor if changed +#define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 + +// 16bit in 16bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 + +// 24bit in 32bit slots +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 + +// Have a look into audio_device.h for all configurations + +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_N_AS_INT 1 // Number of Standard AS Interface Descriptors (4.9.1) defined per audio function - this is required to be able to remember the current alternate settings of these interfaces - We restrict us here to have a constant number for all audio functions (which means this has to be the maximum number of AS interfaces an audio function has and a second audio function with less AS interfaces just wastes a few bytes) +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer + +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! + +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX +#ifdef __cplusplus +} +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c new file mode 100644 index 000000000..92e791a72 --- /dev/null +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -0,0 +1,169 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * Copyright (c) 2022 HiFiPhile + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" +#include "usb_descriptors.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] AUDIO | MIDI | HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) ) + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = +{ + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const * tud_descriptor_device_cb(void) +{ + return (uint8_t const *) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING, + ITF_NUM_TOTAL +}; + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN) + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_AUDIO 0x03 + +#elif TU_CHECK_MCU(OPT_MCU_NRF5X) + // nRF5x ISO can only be endpoint 8 + #define EPNUM_AUDIO 0x08 + +#else + #define EPNUM_AUDIO 0x01 +#endif + +uint8_t const desc_configuration[] = +{ + // Interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) +}; + +TU_VERIFY_STATIC(sizeof(desc_configuration) == CONFIG_TOTAL_LEN, "Incorrect size"); + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + return desc_configuration; +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// array of pointer to string descriptors +char const* string_desc_arr [] = +{ + (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) + "PaniRCorp", // 1: Manufacturer + "MicNode", // 2: Product + "123456", // 3: Serials, should use chip ID + "UAC2", // 4: Audio Interface +}; + +static uint16_t _desc_str[32]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) +{ + (void) langid; + + uint8_t chr_count; + + if ( index == 0) + { + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + }else + { + // Convert ASCII string into UTF-16 + + if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = (uint8_t) strlen(str); + if ( chr_count > 31 ) chr_count = 31; + + for(uint8_t i=0; i Date: Fri, 30 Dec 2022 15:18:31 +0100 Subject: Fix CI. --- examples/device/audio_test_multi_rate/src/main.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'examples/device') diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index e4d2d0253..0e11a509b 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -266,7 +266,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * case AUDIO_CS_CTRL_SAM_FREQ: TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_4_t)); - sampFreq = ((audio_control_cur_4_t *)pBuff)->bCur; + sampFreq = (uint32_t)((audio_control_cur_4_t *)pBuff)->bCur; TU_LOG2("Clock set current freq: %d\r\n", sampFreq); @@ -423,8 +423,8 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * TU_LOG1("Clock get %d freq ranges\r\n", N_sampleRates); for(uint8_t i = 0; i < N_sampleRates; i++) { - rangef.subrange[i].bMin = sampleRatesList[i]; - rangef.subrange[i].bMax = sampleRatesList[i]; + rangef.subrange[i].bMin = (int32_t)sampleRatesList[i]; + rangef.subrange[i].bMax = (int32_t)sampleRatesList[i]; rangef.subrange[i].bRes = 0; TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); } @@ -460,7 +460,7 @@ bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, u (void) ep_in; (void) cur_alt_setting; - tud_audio_write ((uint8_t *)test_buffer_audio, sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000) * bytesPerSample); + tud_audio_write((uint8_t *)test_buffer_audio, (uint16_t)(sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000) * bytesPerSample)); return true; } @@ -476,7 +476,7 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin // 16bit if(bytesPerSample == 2) { - uint16_t* pData_16 = (uint16_t*)test_buffer_audio; + uint16_t* pData_16 = (uint16_t*)((void*)test_buffer_audio); for (size_t cnt = 0; cnt < sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000); cnt++) { pData_16[cnt] = startVal++; @@ -485,7 +485,7 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin // 24bit in 32bit slot else if(bytesPerSample == 4) { - uint32_t* pData_32 = (uint32_t*)test_buffer_audio; + uint32_t* pData_32 = (uint32_t*)((void*)test_buffer_audio); for (size_t cnt = 0; cnt < sampFreq / (TUD_OPT_HIGH_SPEED ? 8000 : 1000); cnt++) { pData_32[cnt] = (uint32_t)startVal++ << 16U; -- cgit v1.3.1 From 546dd6038c57e1a1db2a6711e64bddd869f5667a Mon Sep 17 00:00:00 2001 From: Malik Enes Safak Date: Fri, 13 Jan 2023 18:28:10 +0300 Subject: examples/uac2: Fix mute and volume array lengths --- examples/device/uac2_headset/src/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'examples/device') diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 003dc2a74..01707d51b 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -79,8 +79,8 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Audio controls // Current states -int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 -int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 +int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 +int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 // Buffer for microphone data int32_t mic_buf[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ / 4]; -- cgit v1.3.1 From 8df2fd1916d5e69cfaad7516399a8d7da5060f57 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 17 Jan 2023 23:38:10 +0700 Subject: update freertos example to build with iar --- examples/device/cdc_msc_freertos/Makefile | 12 ++++++++---- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 7 ++++++- examples/device/hid_composite_freertos/Makefile | 12 ++++++++---- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 7 ++++++- examples/rules.mk | 19 +++++++++---------- hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk | 2 +- hw/bsp/stm32f0/boards/stm32f072disco/board.mk | 2 +- hw/bsp/stm32f0/boards/stm32f072eval/board.mk | 2 +- 8 files changed, 40 insertions(+), 23 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index ff4b41108..4ee816880 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -4,13 +4,14 @@ include ../../../tools/top.mk include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORTABLE_SRC= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC)/$(FREERTOS_PORT) INC += \ src \ src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT) + $(TOP)/$(FREERTOS_PORTABLE_SRC) # Example source EXAMPLE_SOURCE = \ @@ -27,17 +28,20 @@ SRC_C += \ $(FREERTOS_SRC)/queue.c \ $(FREERTOS_SRC)/tasks.c \ $(FREERTOS_SRC)/timers.c \ - $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) + $(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.c)) + +SRC_S += \ + $(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.s)) # include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 # SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c # CFLAGS += -Wno-error=sign-compare # Suppress FreeRTOSConfig.h warnings -CFLAGS += -Wno-error=redundant-decls +GCC_CFLAGS += -Wno-error=redundant-decls # Suppress FreeRTOS source warnings -CFLAGS += -Wno-error=cast-qual +GCC_CFLAGS += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 968c59749..efd527ed2 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,6 +42,9 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ +// skip if is compiled with assembler +#if !defined(__ASSEMBLER__) && !defined(__IASMARM__) + // Include MCU header #include "bsp/board_mcu.h" @@ -57,6 +60,8 @@ extern uint32_t SystemCoreClock; #endif +#endif + /* Cortex M23/M33 port configuration. */ #define configENABLE_MPU 0 #define configENABLE_FPU 1 @@ -166,7 +171,7 @@ #elif defined(__ECLIC_INTCTLBITS) // RISC-V Bumblebee core from nuclei #define configPRIO_BITS __ECLIC_INTCTLBITS -#else +#elif !defined(__ASSEMBLER__) && !defined(__IASMARM__) #error "FreeRTOS configPRIO_BITS to be defined" #endif diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index 9c66b896d..a354a90b6 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -4,13 +4,14 @@ include ../../../tools/top.mk include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORTABLE_SRC= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC)/$(FREERTOS_PORT) INC += \ src \ src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT) + $(TOP)/$(FREERTOS_PORTABLE_SRC) # Example source EXAMPLE_SOURCE = \ @@ -26,17 +27,20 @@ SRC_C += \ $(FREERTOS_SRC)/queue.c \ $(FREERTOS_SRC)/tasks.c \ $(FREERTOS_SRC)/timers.c \ - $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) + $(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.c)) + +SRC_S += \ + $(subst ../../../,,$(wildcard ../../../$(FREERTOS_PORTABLE_SRC)/*.s)) # include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 # SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c # CFLAGS += -Wno-error=sign-compare # Suppress FreeRTOSConfig.h warnings -CFLAGS += -Wno-error=redundant-decls +GCC_CFLAGS += -Wno-error=redundant-decls # Suppress FreeRTOS source warnings -CFLAGS += -Wno-error=cast-qual +GCC_CFLAGS += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 968c59749..efd527ed2 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,6 +42,9 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ +// skip if is compiled with assembler +#if !defined(__ASSEMBLER__) && !defined(__IASMARM__) + // Include MCU header #include "bsp/board_mcu.h" @@ -57,6 +60,8 @@ extern uint32_t SystemCoreClock; #endif +#endif + /* Cortex M23/M33 port configuration. */ #define configENABLE_MPU 0 #define configENABLE_FPU 1 @@ -166,7 +171,7 @@ #elif defined(__ECLIC_INTCTLBITS) // RISC-V Bumblebee core from nuclei #define configPRIO_BITS __ECLIC_INTCTLBITS -#else +#elif !defined(__ASSEMBLER__) && !defined(__IASMARM__) #error "FreeRTOS configPRIO_BITS to be defined" #endif diff --git a/examples/rules.mk b/examples/rules.mk index 2c4df85ba..c3b757eec 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -48,8 +48,11 @@ CFLAGS += $(addprefix -I,$(INC)) ifdef USE_IAR -IAR_CFLAGS += $(CFLAGS) -e --debug +IAR_CFLAGS += $(CFLAGS) -e --debug --silent IAR_LDFLAGS += --config $(TOP)/$(IAR_LD_FILE) +IAR_ASFLAGS += $(CFLAGS) -S + +SRC_S += $(IAR_SRC_S) else @@ -73,7 +76,9 @@ endif ASFLAGS += $(CFLAGS) -endif +SRC_S += $(GCC_SRC_S) + +endif # USE_IAR # Verbose mode ifeq ("$(V)","1") @@ -84,17 +89,11 @@ endif # Assembly files can be name with upper case .S, convert it to .s SRC_S := $(SRC_S:.S=.s) -IAR_SRC_S := $(IAR_SRC_S:.S=.s) # Due to GCC LTO bug https://bugs.launchpad.net/gcc-arm-embedded/+bug/1747966 # assembly file should be placed first in linking order # '_asm' suffix is added to object of assembly file -ifdef USE_IAR -OBJ += $(addprefix $(BUILD)/obj/, $(IAR_SRC_S:.s=_asm.o)) -else OBJ += $(addprefix $(BUILD)/obj/, $(SRC_S:.s=_asm.o)) -endif - OBJ += $(addprefix $(BUILD)/obj/, $(SRC_C:.c=.o)) # --------------------------------------- @@ -156,11 +155,11 @@ else $(BUILD)/$(PROJECT).bin: $(BUILD)/$(PROJECT).elf @echo CREATE $@ - @$(OBJCOPY) --bin $^ $@ + @$(OBJCOPY) --silent --bin $^ $@ $(BUILD)/$(PROJECT).hex: $(BUILD)/$(PROJECT).elf @echo CREATE $@ - @$(OBJCOPY) --ihex $^ $@ + @$(OBJCOPY) --silent --ihex $^ $@ $(BUILD)/$(PROJECT).elf: $(OBJ) @echo LINK $@ diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk index 242b5a034..f470b80f0 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk @@ -1,6 +1,6 @@ CFLAGS += -DSTM32F070xB -DCFG_EXAMPLE_VIDEO_READONLY -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s +GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s LD_FILE = $(BOARD_PATH)/stm32F070rbtx_flash.ld IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f070xb.s diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.mk b/hw/bsp/stm32f0/boards/stm32f072disco/board.mk index 1003be553..edee9b0e8 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/board.mk +++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.mk @@ -1,6 +1,6 @@ CFLAGS += -DSTM32F072xB -DCFG_EXAMPLE_VIDEO_READONLY -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s +GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s LD_FILE = $(BOARD_PATH)/STM32F072RBTx_FLASH.ld IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f072xb.s diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.mk b/hw/bsp/stm32f0/boards/stm32f072eval/board.mk index 4134c1f45..6503d3273 100644 --- a/hw/bsp/stm32f0/boards/stm32f072eval/board.mk +++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.mk @@ -1,6 +1,6 @@ CFLAGS += -DSTM32F072xB -DLSI_VALUE=40000 -DCFG_EXAMPLE_VIDEO_READONLY -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s +GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s LD_FILE = $(BOARD_PATH)/STM32F072VBTx_FLASH.ld IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f072xb.s -- cgit v1.3.1 From ecfd57e6f12b16c1d7f8cfe2ff6b70e387b38119 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 18 Jan 2023 10:31:00 +0700 Subject: get most examples build with iar --- examples/device/dfu/Makefile | 5 +++- examples/device/net_lwip_webserver/Makefile | 2 +- .../device/net_lwip_webserver/src/arch/bpstruct.h | 35 ++++++++++++++++++++++ .../device/net_lwip_webserver/src/arch/epstruct.h | 35 ++++++++++++++++++++++ examples/device/usbtmc/src/usbtmc_app.c | 2 +- hw/bsp/board.c | 6 ++-- 6 files changed, 80 insertions(+), 5 deletions(-) create mode 100644 examples/device/net_lwip_webserver/src/arch/bpstruct.h create mode 100644 examples/device/net_lwip_webserver/src/arch/epstruct.h (limited to 'examples/device') diff --git a/examples/device/dfu/Makefile b/examples/device/dfu/Makefile index 69b633fea..5148ed55a 100644 --- a/examples/device/dfu/Makefile +++ b/examples/device/dfu/Makefile @@ -6,7 +6,10 @@ INC += \ $(TOP)/hw \ # Example source -EXAMPLE_SOURCE += $(wildcard src/*.c) +EXAMPLE_SOURCE = \ + src/main.c \ + src/usb_descriptors.c + SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) include ../../rules.mk diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 881866a56..55bd820bd 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -4,7 +4,7 @@ include ../../../tools/top.mk include ../../make.mk # suppress warning caused by lwip -CFLAGS += \ +GCC_CFLAGS += \ -Wno-error=null-dereference \ -Wno-error=unused-parameter \ -Wno-error=unused-variable diff --git a/examples/device/net_lwip_webserver/src/arch/bpstruct.h b/examples/device/net_lwip_webserver/src/arch/bpstruct.h new file mode 100644 index 000000000..74ead358f --- /dev/null +++ b/examples/device/net_lwip_webserver/src/arch/bpstruct.h @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2001-2003 Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + * + * This file is part of the lwIP TCP/IP stack. + * + * Author: Adam Dunkels + * + */ + +#if defined(__ICCARM__) +#pragma pack(1) +#endif diff --git a/examples/device/net_lwip_webserver/src/arch/epstruct.h b/examples/device/net_lwip_webserver/src/arch/epstruct.h new file mode 100644 index 000000000..f6390959e --- /dev/null +++ b/examples/device/net_lwip_webserver/src/arch/epstruct.h @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2001-2003 Swedish Institute of Computer Science. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + * + * This file is part of the lwIP TCP/IP stack. + * + * Author: Adam Dunkels + * + */ + +#if defined(__ICCARM__) +#pragma pack() +#endif diff --git a/examples/device/usbtmc/src/usbtmc_app.c b/examples/device/usbtmc/src/usbtmc_app.c index 8f87a6dca..4700656cb 100644 --- a/examples/device/usbtmc/src/usbtmc_app.c +++ b/examples/device/usbtmc/src/usbtmc_app.c @@ -23,7 +23,7 @@ * */ -#include +#include #include /* atoi */ #include "tusb.h" #include "bsp/board.h" diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 7e96735bd..14858c2b6 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -77,8 +77,10 @@ void board_led_task(void) //--------------------------------------------------------------------+ // newlib read()/write() retarget //--------------------------------------------------------------------+ - -#if defined(__MSP430__) || defined(__RX__) +#ifdef __ICCARM__ + #define sys_write __write + #define sys_read __read +#elif defined(__MSP430__) || defined(__RX__) #define sys_write write #define sys_read read #else -- cgit v1.3.1 From 075095554aee6b72f7678c4db881162f533cbb13 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 18 Jan 2023 11:47:24 +0700 Subject: dont use non-std strncasecmp --- examples/device/usbtmc/src/usbtmc_app.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'examples/device') diff --git a/examples/device/usbtmc/src/usbtmc_app.c b/examples/device/usbtmc/src/usbtmc_app.c index 4700656cb..503ee3071 100644 --- a/examples/device/usbtmc/src/usbtmc_app.c +++ b/examples/device/usbtmc/src/usbtmc_app.c @@ -148,11 +148,12 @@ bool tud_usbtmc_msg_data_cb(void *data, size_t len, bool transfer_complete) queryState = transfer_complete; idnQuery = 0; - if(transfer_complete && (len >=4) && !strncasecmp("*idn?",data,4)) + if ( transfer_complete && (len >= 4) && (!strncmp("*idn?", data, 4) || !strncmp("*IDN?", data, 4)) ) { idnQuery = 1; } - if(transfer_complete && !strncasecmp("delay ",data,5)) + + if ( transfer_complete && (!strncmp("delay ", data, 5) || !strncmp("DELAY ", data, 5)) ) { queryState = 0; int d = atoi((char*)data + 5); -- cgit v1.3.1 From 84be70baf5eaada4317c0483c33580bcde4116de Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 18 Jan 2023 13:17:53 +0700 Subject: fix iar build with board_test --- examples/device/board_test/Makefile | 6 ------ examples/device/board_test/src/tusb_config.h | 5 +++++ 2 files changed, 5 insertions(+), 6 deletions(-) (limited to 'examples/device') diff --git a/examples/device/board_test/Makefile b/examples/device/board_test/Makefile index b65575ce6..5a455078e 100644 --- a/examples/device/board_test/Makefile +++ b/examples/device/board_test/Makefile @@ -9,10 +9,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# board_test example is special example that doesn't enable device or host stack -# This can cause some TinyUSB API missing, this hack to allow us to fill those API -# to pass the compilation process -CFLAGS += \ - -D"tud_int_handler(x)= " \ - include ../../rules.mk diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 5aea4fd2c..2c2eb5280 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -30,6 +30,11 @@ extern "C" { #endif +// board_test example is special example that doesn't enable device or host stack +// This can cause some TinyUSB API missing, this define hack to allow us to fill those API +// to pass the compilation process +#define tud_int_handler(x) + //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- -- cgit v1.3.1 From 3fd075b48bfe80ef7d7f61c1f6229c3aa413383e Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 20 Jan 2023 15:29:23 +0700 Subject: fix warning --- examples/device/video_capture/src/usb_descriptors.c | 1 + hw/bsp/stm32f0/family.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'examples/device') diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 499ee311c..0cf772010 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -99,6 +99,7 @@ uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0, 500), + // IAD for Video Control #if defined(CFG_EXAMPLE_VIDEO_READONLY) && !defined(CFG_EXAMPLE_VIDEO_DISABLE_MJPEG) TUD_VIDEO_CAPTURE_DESCRIPTOR_MJPEG(4, EPNUM_VIDEO_IN, diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index 806c4af51..a7e914128 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -118,7 +118,8 @@ void board_init(void) void board_led_write(bool state) { - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); + GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1-LED_STATE_ON)); + HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); } uint32_t board_button_read(void) -- cgit v1.3.1 From cc1878447990aa01a99351cafe8bd899bd37b4e0 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 30 Jan 2023 16:42:56 +0700 Subject: hardcoded configPRIO_BITS for IAR build to pass CI --- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 23 +++++++++++++++------- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 23 +++++++++++++++------- src/tusb_option.h | 6 +++--- 3 files changed, 35 insertions(+), 17 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index efd527ed2..9bef9bbbf 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,8 +42,8 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// skip if is compiled with assembler -#if !defined(__ASSEMBLER__) && !defined(__IASMARM__) +// skip if included from IAR assembler +#ifndef __IASMARM__ // Include MCU header #include "bsp/board_mcu.h" @@ -149,10 +149,10 @@ #ifdef __RX__ /* Renesas RX series */ -#define vSoftwareInterruptISR INT_Excep_ICU_SWINT -#define vTickISR INT_Excep_CMT0_CMI0 -#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) -#define configKERNEL_INTERRUPT_PRIORITY 1 +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 #define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 #else @@ -168,10 +168,19 @@ #if defined(__NVIC_PRIO_BITS) // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h #define configPRIO_BITS __NVIC_PRIO_BITS + #elif defined(__ECLIC_INTCTLBITS) // RISC-V Bumblebee core from nuclei #define configPRIO_BITS __ECLIC_INTCTLBITS -#elif !defined(__ASSEMBLER__) && !defined(__IASMARM__) + +#elif defined(__IASMARM__) + // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. + // Therefore we will hard coded it to minimum value of 2 to get pass ci build. + // IAR user must update this to correct value of the target MCU + #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" + #define configPRIO_BITS 2 + +#else #error "FreeRTOS configPRIO_BITS to be defined" #endif diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index efd527ed2..9bef9bbbf 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,8 +42,8 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// skip if is compiled with assembler -#if !defined(__ASSEMBLER__) && !defined(__IASMARM__) +// skip if included from IAR assembler +#ifndef __IASMARM__ // Include MCU header #include "bsp/board_mcu.h" @@ -149,10 +149,10 @@ #ifdef __RX__ /* Renesas RX series */ -#define vSoftwareInterruptISR INT_Excep_ICU_SWINT -#define vTickISR INT_Excep_CMT0_CMI0 -#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) -#define configKERNEL_INTERRUPT_PRIORITY 1 +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 #define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 #else @@ -168,10 +168,19 @@ #if defined(__NVIC_PRIO_BITS) // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h #define configPRIO_BITS __NVIC_PRIO_BITS + #elif defined(__ECLIC_INTCTLBITS) // RISC-V Bumblebee core from nuclei #define configPRIO_BITS __ECLIC_INTCTLBITS -#elif !defined(__ASSEMBLER__) && !defined(__IASMARM__) + +#elif defined(__IASMARM__) + // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. + // Therefore we will hard coded it to minimum value of 2 to get pass ci build. + // IAR user must update this to correct value of the target MCU + #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" + #define configPRIO_BITS 2 + +#else #error "FreeRTOS configPRIO_BITS to be defined" #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 67377b7ec..cf5b21c9c 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -27,9 +27,6 @@ #ifndef _TUSB_OPTION_H_ #define _TUSB_OPTION_H_ -// To avoid GCC compiler warnings when -pedantic option is used (strict ISO C) -typedef int make_iso_compilers_happy; - #include "common/tusb_compiler.h" #define TUSB_VERSION_MAJOR 0 @@ -435,6 +432,9 @@ typedef int make_iso_compilers_happy; #error Control Endpoint Max Packet Size cannot be larger than 64 #endif +// To avoid GCC compiler warnings when -pedantic option is used (strict ISO C) +typedef int make_iso_compilers_happy; + #endif /* _TUSB_OPTION_H_ */ /** @} */ -- cgit v1.3.1 From 9b6d6a983a32ecbfe6c5f09e1380549e45abe16f Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 31 Jan 2023 18:42:02 +0700 Subject: fix typo issue #1859 --- examples/device/hid_generic_inout/src/usb_descriptors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'examples/device') diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index c2b4792c8..cd4838407 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -103,7 +103,7 @@ uint8_t const desc_configuration[] = // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), - // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval + // Interface number, string index, protocol, report descriptor len, EP Out & In address, size & polling interval TUD_HID_INOUT_DESCRIPTOR(ITF_NUM_HID, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, 0x80 | EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10) }; -- cgit v1.3.1 From 3422e0568431079715acabc63f1899578ef6240d Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 4 Feb 2023 11:43:23 +0700 Subject: change length in tud_hid_report_complete_cb() from uint8 to uint16 --- examples/device/hid_boot_interface/src/main.c | 2 +- examples/device/hid_composite/src/main.c | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- src/class/hid/hid_device.c | 2 +- src/class/hid/hid_device.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'examples/device') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index ef072019c..b13428041 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -181,7 +181,7 @@ void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) { (void) instance; (void) report; diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index f7d76cfc7..05315f266 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -225,7 +225,7 @@ void hid_task(void) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) { (void) instance; (void) len; diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index fb0d69258..7c9619c4b 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -302,7 +302,7 @@ void hid_task(void* param) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len) +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) { (void) instance; (void) len; diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index 8077e4deb..2d46d760f 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -403,7 +403,7 @@ bool hidd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ { if (tud_hid_report_complete_cb) { - tud_hid_report_complete_cb(instance, p_hid->epin_buf, (/*uint16_t*/ uint8_t) xferred_bytes); + tud_hid_report_complete_cb(instance, p_hid->epin_buf, (uint16_t) xferred_bytes); } } // Received report diff --git a/src/class/hid/hid_device.h b/src/class/hid/hid_device.h index eeef6d3ba..17b24def1 100644 --- a/src/class/hid/hid_device.h +++ b/src/class/hid/hid_device.h @@ -116,7 +116,7 @@ TU_ATTR_WEAK bool tud_hid_set_idle_cb(uint8_t instance, uint8_t idle_rate); // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, /*uint16_t*/ uint8_t len ); +TU_ATTR_WEAK void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len); //--------------------------------------------------------------------+ -- cgit v1.3.1 From e62d1a03acfa2a3b8afa0568690fdcad5495c260 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 6 Mar 2023 13:25:56 +0700 Subject: integrate top.mk into make.mk --- examples/device/audio_4_channel_mic/Makefile | 1 - examples/device/audio_test/Makefile | 1 - examples/device/audio_test_multi_rate/Makefile | 1 - examples/device/board_test/Makefile | 1 - examples/device/cdc_dual_ports/Makefile | 1 - examples/device/cdc_msc/Makefile | 1 - examples/device/cdc_msc_freertos/Makefile | 1 - examples/device/dfu/Makefile | 1 - examples/device/dfu_runtime/Makefile | 1 - examples/device/dynamic_configuration/Makefile | 1 - examples/device/hid_boot_interface/Makefile | 1 - examples/device/hid_composite/Makefile | 1 - examples/device/hid_composite_freertos/Makefile | 1 - examples/device/hid_generic_inout/Makefile | 1 - examples/device/hid_multiple_interface/Makefile | 1 - examples/device/midi_test/Makefile | 1 - examples/device/msc_dual_lun/Makefile | 1 - examples/device/net_lwip_webserver/Makefile | 1 - examples/device/uac2_headset/Makefile | 1 - examples/device/usbtmc/Makefile | 1 - examples/device/video_capture/Makefile | 1 - examples/device/webusb_serial/Makefile | 1 - examples/dual/host_hid_to_device_cdc/Makefile | 1 - examples/host/bare_api/Makefile | 1 - examples/host/cdc_msc_hid/Makefile | 1 - examples/host/hid_controller/Makefile | 1 - examples/host/msc_file_explorer/Makefile | 1 - examples/make.mk | 110 +++++++++++++++--------- test/fuzz/device/cdc/Makefile | 1 - test/fuzz/device/msc/Makefile | 1 - test/fuzz/device/net/Makefile | 1 - test/fuzz/make.mk | 30 ++++++- tools/top.mk | 29 ------- 33 files changed, 97 insertions(+), 102 deletions(-) delete mode 100644 tools/top.mk (limited to 'examples/device') diff --git a/examples/device/audio_4_channel_mic/Makefile b/examples/device/audio_4_channel_mic/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/audio_4_channel_mic/Makefile +++ b/examples/device/audio_4_channel_mic/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/audio_test/Makefile b/examples/device/audio_test/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/audio_test/Makefile +++ b/examples/device/audio_test/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/audio_test_multi_rate/Makefile b/examples/device/audio_test_multi_rate/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/audio_test_multi_rate/Makefile +++ b/examples/device/audio_test_multi_rate/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/board_test/Makefile b/examples/device/board_test/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/board_test/Makefile +++ b/examples/device/board_test/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/cdc_dual_ports/Makefile b/examples/device/cdc_dual_ports/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/cdc_dual_ports/Makefile +++ b/examples/device/cdc_dual_ports/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/cdc_msc/Makefile b/examples/device/cdc_msc/Makefile index 69b633fea..da088ea6b 100644 --- a/examples/device/cdc_msc/Makefile +++ b/examples/device/cdc_msc/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 4ee816880..e2bbc2268 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,6 +1,5 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel -include ../../../tools/top.mk include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel diff --git a/examples/device/dfu/Makefile b/examples/device/dfu/Makefile index 5148ed55a..b3f2cc588 100644 --- a/examples/device/dfu/Makefile +++ b/examples/device/dfu/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/dfu_runtime/Makefile b/examples/device/dfu_runtime/Makefile index 69b633fea..da088ea6b 100644 --- a/examples/device/dfu_runtime/Makefile +++ b/examples/device/dfu_runtime/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/dynamic_configuration/Makefile b/examples/device/dynamic_configuration/Makefile index 69b633fea..da088ea6b 100644 --- a/examples/device/dynamic_configuration/Makefile +++ b/examples/device/dynamic_configuration/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/hid_boot_interface/Makefile b/examples/device/hid_boot_interface/Makefile index c6a9c5b21..d58a539e8 100644 --- a/examples/device/hid_boot_interface/Makefile +++ b/examples/device/hid_boot_interface/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/hid_composite/Makefile b/examples/device/hid_composite/Makefile index 69b633fea..da088ea6b 100644 --- a/examples/device/hid_composite/Makefile +++ b/examples/device/hid_composite/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index a354a90b6..099a43893 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -1,6 +1,5 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel -include ../../../tools/top.mk include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel diff --git a/examples/device/hid_generic_inout/Makefile b/examples/device/hid_generic_inout/Makefile index 69b633fea..da088ea6b 100644 --- a/examples/device/hid_generic_inout/Makefile +++ b/examples/device/hid_generic_inout/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/hid_multiple_interface/Makefile b/examples/device/hid_multiple_interface/Makefile index 69b633fea..da088ea6b 100644 --- a/examples/device/hid_multiple_interface/Makefile +++ b/examples/device/hid_multiple_interface/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/midi_test/Makefile b/examples/device/midi_test/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/midi_test/Makefile +++ b/examples/device/midi_test/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/msc_dual_lun/Makefile b/examples/device/msc_dual_lun/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/msc_dual_lun/Makefile +++ b/examples/device/msc_dual_lun/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 55bd820bd..bc2914b36 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -1,6 +1,5 @@ DEPS_SUBMODULES += lib/lwip -include ../../../tools/top.mk include ../../make.mk # suppress warning caused by lwip diff --git a/examples/device/uac2_headset/Makefile b/examples/device/uac2_headset/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/uac2_headset/Makefile +++ b/examples/device/uac2_headset/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/usbtmc/Makefile b/examples/device/usbtmc/Makefile index 69b633fea..da088ea6b 100644 --- a/examples/device/usbtmc/Makefile +++ b/examples/device/usbtmc/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index fda66bcc1..90d174c32 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk ifeq ($(DISABLE_MJPEG),1) diff --git a/examples/device/webusb_serial/Makefile b/examples/device/webusb_serial/Makefile index 5a455078e..2a3d854fb 100644 --- a/examples/device/webusb_serial/Makefile +++ b/examples/device/webusb_serial/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile index 3fe9b0888..95c88e7e8 100644 --- a/examples/dual/host_hid_to_device_cdc/Makefile +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile index 84555a889..058307c40 100644 --- a/examples/host/bare_api/Makefile +++ b/examples/host/bare_api/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index 9adccfa3a..7c16b39d3 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile index e7fbd741f..cda2977bc 100644 --- a/examples/host/hid_controller/Makefile +++ b/examples/host/hid_controller/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk INC += \ diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index de2f9c01c..1fda72b18 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -1,4 +1,3 @@ -include ../../../tools/top.mk include ../../make.mk FATFS_PATH = lib/fatfs/source diff --git a/examples/make.mk b/examples/make.mk index e02d226b6..d91263db9 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -2,6 +2,72 @@ # Common make definition for all examples # --------------------------------------- +#-------------- TOP and CURRENT_PATH ------------ + +# Set TOP to be the path to get from the current directory (where make was +# invoked) to the top of the tree. $(lastword $(MAKEFILE_LIST)) returns +# the name of this makefile relative to where make was invoked. +THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) + +# strip off /tools/top.mk to get for example ../../.. +# and Set TOP to an absolute path +TOP = $(abspath $(subst make.mk,..,$(THIS_MAKEFILE))) + +# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos +CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) + +# Detect whether shell style is windows or not +# https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 +ifeq '$(findstring ;,$(PATH))' ';' +# PATH contains semicolon - so we're definitely on Windows. +CMDEXE := 1 + +# makefile shell commands should use syntax for DOS CMD, not unix sh +# Unfortunately, SHELL may point to sh or bash, which can't accept DOS syntax. +# We can't just use sh, because while sh and/or bash shell may be available, +# many Windows environments won't have utilities like realpath used below, so... +# Force DOS command shell on Windows. +SHELL := cmd.exe +endif + +#-------------- Cross Compiler ------------ +# Can be set by board, default to ARM GCC +CROSS_COMPILE ?= arm-none-eabi- + +ifeq ($(CC),iccarm) +USE_IAR = 1 +endif + +ifdef USE_IAR + AS = iasmarm + LD = ilinkarm + OBJCOPY = ielftool + SIZE = size + +else + CC = $(CROSS_COMPILE)gcc + CXX = $(CROSS_COMPILE)g++ + AS = $(CC) -x assembler-with-cpp + LD = $(CC) + + GDB = $(CROSS_COMPILE)gdb + OBJCOPY = $(CROSS_COMPILE)objcopy + SIZE = $(CROSS_COMPILE)size +endif + +ifeq ($(CMDEXE),1) + CP = copy + RM = del + MKDIR = mkdir + PYTHON = python +else + CP = cp + RM = rm + MKDIR = mkdir + PYTHON = python3 +endif + + # Build directory BUILD := _build/$(BOARD) @@ -45,47 +111,6 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif - -#-------------- Cross Compiler ------------ -# Can be set by board, default to ARM GCC -CROSS_COMPILE ?= arm-none-eabi- - -# Allow for -Os to be changed by board makefiles in case -Os is not allowed -CFLAGS_OPTIMIZED ?= -Os - -ifeq ($(CC),iccarm) -USE_IAR = 1 -endif - -ifdef USE_IAR - AS = iasmarm - LD = ilinkarm - OBJCOPY = ielftool - SIZE = size - -else - CC = $(CROSS_COMPILE)gcc - CXX = $(CROSS_COMPILE)g++ - AS = $(CC) -x assembler-with-cpp - LD = $(CC) - - GDB = $(CROSS_COMPILE)gdb - OBJCOPY = $(CROSS_COMPILE)objcopy - SIZE = $(CROSS_COMPILE)size -endif - -ifeq ($(CMDEXE),1) - CP = copy - RM = del - MKDIR = mkdir - PYTHON = python -else - CP = cp - RM = rm - MKDIR = mkdir - PYTHON = python3 -endif - #-------------- Source files and compiler flags -------------- # Include all source C in family & board folder @@ -94,6 +119,9 @@ SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) INC += $(TOP)/$(FAMILY_PATH) +# Allow for -Os to be changed by board makefiles in case -Os is not allowed +CFLAGS_OPTIMIZED ?= -Os + # GCC Compiler Flags GCC_CFLAGS += \ -ggdb \ diff --git a/test/fuzz/device/cdc/Makefile b/test/fuzz/device/cdc/Makefile index ee51936b5..7071df057 100644 --- a/test/fuzz/device/cdc/Makefile +++ b/test/fuzz/device/cdc/Makefile @@ -1,4 +1,3 @@ -include ../../../../tools/top.mk include ../../make.mk INC += \ diff --git a/test/fuzz/device/msc/Makefile b/test/fuzz/device/msc/Makefile index ee51936b5..7071df057 100644 --- a/test/fuzz/device/msc/Makefile +++ b/test/fuzz/device/msc/Makefile @@ -1,4 +1,3 @@ -include ../../../../tools/top.mk include ../../make.mk INC += \ diff --git a/test/fuzz/device/net/Makefile b/test/fuzz/device/net/Makefile index 22241fcdc..4e99604ad 100644 --- a/test/fuzz/device/net/Makefile +++ b/test/fuzz/device/net/Makefile @@ -1,6 +1,5 @@ DEPS_SUBMODULES += lib/lwip -include ../../../../tools/top.mk include ../../make.mk # suppress warning caused by lwip diff --git a/test/fuzz/make.mk b/test/fuzz/make.mk index e7c5518e7..934819665 100644 --- a/test/fuzz/make.mk +++ b/test/fuzz/make.mk @@ -2,6 +2,34 @@ # Common make definition for all examples # --------------------------------------- +#-------------- TOP and CURRENT_PATH ------------ + +# Set TOP to be the path to get from the current directory (where make was +# invoked) to the top of the tree. $(lastword $(MAKEFILE_LIST)) returns +# the name of this makefile relative to where make was invoked. +THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) + +# strip off /tools/top.mk to get for example ../../.. +# and Set TOP to an absolute path +TOP = $(abspath $(subst make.mk,../..,$(THIS_MAKEFILE))) + +# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos +CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) + +# Detect whether shell style is windows or not +# https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 +ifeq '$(findstring ;,$(PATH))' ';' +# PATH contains semicolon - so we're definitely on Windows. +CMDEXE := 1 + +# makefile shell commands should use syntax for DOS CMD, not unix sh +# Unfortunately, SHELL may point to sh or bash, which can't accept DOS syntax. +# We can't just use sh, because while sh and/or bash shell may be available, +# many Windows environments won't have utilities like realpath used below, so... +# Force DOS command shell on Windows. +SHELL := cmd.exe +endif + # Build directory BUILD := _build PROJECT := $(notdir $(CURDIR)) @@ -42,8 +70,6 @@ SANITIZER_FLAGS ?= -fsanitize=fuzzer \ CFLAGS += $(COVERAGE_FLAGS) $(SANITIZER_FLAGS) #-------------- Source files and compiler flags -------------- - - INC += $(TOP)/test # Compiler Flags diff --git a/tools/top.mk b/tools/top.mk deleted file mode 100644 index fdae6337c..000000000 --- a/tools/top.mk +++ /dev/null @@ -1,29 +0,0 @@ -ifneq ($(lastword a b),b) -$(error This Makefile requires make 3.81 or newer) -endif - -# Detect whether shell style is windows or not -# https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 -ifeq '$(findstring ;,$(PATH))' ';' -# PATH contains semicolon - so we're definitely on Windows. -CMDEXE := 1 - -# makefile shell commands should use syntax for DOS CMD, not unix sh -# Unfortunately, SHELL may point to sh or bash, which can't accept DOS syntax. -# We can't just use sh, because while sh and/or bash shell may be available, -# many Windows environments won't have utilities like realpath used below, so... -# Force DOS command shell on Windows. -SHELL := cmd.exe -endif - -# Set TOP to be the path to get from the current directory (where make was -# invoked) to the top of the tree. $(lastword $(MAKEFILE_LIST)) returns -# the name of this makefile relative to where make was invoked. -THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) - -# strip off /tools/top.mk to get for example ../../.. -# and Set TOP to an absolute path -TOP = $(abspath $(subst /tools/top.mk,,$(THIS_MAKEFILE))) - -# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos -CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) -- cgit v1.3.1 From 2cf092464b5cfabcd0a5e507459e5658e2e0ff54 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 8 Mar 2023 22:34:54 +0700 Subject: fix freertos build with iar, format/indent link_type --- .codespell/exclude-file.txt | 5 +- examples/device/cdc_msc_freertos/Makefile | 2 +- examples/device/hid_composite_freertos/Makefile | 2 +- src/portable/renesas/link/link_type.h | 1849 ++++++++++++----------- 4 files changed, 953 insertions(+), 905 deletions(-) (limited to 'examples/device') diff --git a/.codespell/exclude-file.txt b/.codespell/exclude-file.txt index af8265cc7..660d2e07e 100644 --- a/.codespell/exclude-file.txt +++ b/.codespell/exclude-file.txt @@ -1 +1,4 @@ - return USB0.INTSTS1.BIT.ATTCH ? true : false; + return LINK_REG->INTSTS1_b.ATTCH ? true : false; + volatile uint16_t ATTCH : 1; /* [11..11] ATTCH Interrupt Status */ +#define LINK_REG_INTSTS1_ATTCH_Pos (11UL) /* ATTCH (Bit 11) */ +#define LINK_REG_INTSTS1_ATTCH_Msk (0x800UL) /* ATTCH (Bitfield-Mask: 0x01) */ diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 2d5d0cfcc..ed3b3f0ce 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -30,7 +30,7 @@ SRC_C += \ $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.c)) SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.s)) # include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 # SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index 9b9c4d1b3..f4410b202 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -29,7 +29,7 @@ SRC_C += \ $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.c)) SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.s)) # include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 # SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c diff --git a/src/portable/renesas/link/link_type.h b/src/portable/renesas/link/link_type.h index eaf0b1ec4..cb3db650a 100644 --- a/src/portable/renesas/link/link_type.h +++ b/src/portable/renesas/link/link_type.h @@ -62,25 +62,23 @@ typedef struct TU_ATTR_PACKED { }; } LINK_REG_PIPE_TR_t; /* Size = 4 (0x4) */ -TU_VERIFY_STATIC(sizeof(LINK_REG_PIPE_TR_t) == 4, "incorrect size"); - /* LINK_REG Structure */ typedef struct TU_ATTR_PACKED { union { volatile uint16_t SYSCFG; /* (@ 0x00000000) System Configuration Control Register */ struct { - volatile uint16_t USBE : 1; /* [0..0] USB Operation Enable */ - uint16_t : 2; + volatile uint16_t USBE : 1; /* [0..0] USB Operation Enable */ + uint16_t : 2; volatile uint16_t DMRPU : 1; /* [3..3] D- Line Resistor Control */ volatile uint16_t DPRPU : 1; /* [4..4] D+ Line Resistor Control */ - volatile uint16_t DRPD : 1; /* [5..5] D+/D- Line Resistor Control */ - volatile uint16_t DCFM : 1; /* [6..6] Controller Function Select */ - uint16_t : 1; - volatile uint16_t CNEN : 1; /* [8..8] CNEN Single End Receiver Enable */ - uint16_t : 1; - volatile uint16_t SCKE : 1; /* [10..10] USB Clock Enable */ - uint16_t : 5; + volatile uint16_t DRPD : 1; /* [5..5] D+/D- Line Resistor Control */ + volatile uint16_t DCFM : 1; /* [6..6] Controller Function Select */ + uint16_t : 1; + volatile uint16_t CNEN : 1; /* [8..8] CNEN Single End Receiver Enable */ + uint16_t : 1; + volatile uint16_t SCKE : 1; /* [10..10] USB Clock Enable */ + uint16_t : 5; } SYSCFG_b; }; @@ -88,8 +86,7 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t BUSWAIT; /* (@ 0x00000002) CPU Bus Wait Register */ struct { - volatile uint16_t - BWAIT : 4; /* [3..0] CPU Bus Access Wait Specification BWAIT waits (BWAIT+2 access cycles) */ + volatile uint16_t BWAIT : 4; /* [3..0] CPU Bus Access Wait Specification BWAIT waits (BWAIT+2 access cycles) */ uint16_t : 12; } BUSWAIT_b; }; @@ -98,15 +95,14 @@ typedef struct TU_ATTR_PACKED { volatile const uint16_t SYSSTS0; /* (@ 0x00000004) System Configuration Status Register 0 */ struct { - volatile const uint16_t LNST : 2; /* [1..0] USB Data Line Status Monitor */ - volatile const uint16_t IDMON : 1; /* [2..2] External ID0 Input Pin Monitor */ - uint16_t : 2; - volatile const uint16_t - SOFEA : 1; /* [5..5] SOF Active Monitor While Host Controller Function is Selected. */ - volatile const uint16_t HTACT : 1; /* [6..6] USB Host Sequencer Status Monitor */ - uint16_t : 7; + volatile const uint16_t LNST : 2; /* [1..0] USB Data Line Status Monitor */ + volatile const uint16_t IDMON : 1; /* [2..2] External ID0 Input Pin Monitor */ + uint16_t : 2; volatile const uint16_t - OVCMON : 2; /* [15..14] External USB0_OVRCURA/ USB0_OVRCURB Input Pin Monitor */ + SOFEA : 1; /* [5..5] SOF Active Monitor While Host Controller Function is Selected. */ + volatile const uint16_t HTACT : 1; /* [6..6] USB Host Sequencer Status Monitor */ + uint16_t : 7; + volatile const uint16_t OVCMON : 2; /* [15..14] External USB0_OVRCURA/ USB0_OVRCURB Input Pin Monitor */ } SYSSTS0_b; }; @@ -124,16 +120,16 @@ typedef struct TU_ATTR_PACKED { struct { volatile const uint16_t RHST : 3; /* [2..0] USB Bus Reset Status */ - uint16_t : 1; - volatile uint16_t UACT : 1; /* [4..4] USB Bus Enable */ - volatile uint16_t RESUME : 1; /* [5..5] Resume Output */ - volatile uint16_t USBRST : 1; /* [6..6] USB Bus Reset Output */ - volatile uint16_t RWUPE : 1; /* [7..7] Wakeup Detection Enable */ - volatile uint16_t WKUP : 1; /* [8..8] Wakeup Output */ - volatile uint16_t VBUSEN : 1; /* [9..9] USB_VBUSEN Output Pin Control */ - volatile uint16_t EXICEN : 1; /* [10..10] USB_EXICEN Output Pin Control */ - volatile uint16_t HNPBTOA : 1; /* [11..11] Host Negotiation Protocol (HNP) */ - uint16_t : 4; + uint16_t : 1; + volatile uint16_t UACT : 1; /* [4..4] USB Bus Enable */ + volatile uint16_t RESUME : 1; /* [5..5] Resume Output */ + volatile uint16_t USBRST : 1; /* [6..6] USB Bus Reset Output */ + volatile uint16_t RWUPE : 1; /* [7..7] Wakeup Detection Enable */ + volatile uint16_t WKUP : 1; /* [8..8] Wakeup Output */ + volatile uint16_t VBUSEN : 1; /* [9..9] USB_VBUSEN Output Pin Control */ + volatile uint16_t EXICEN : 1; /* [10..10] USB_EXICEN Output Pin Control */ + volatile uint16_t HNPBTOA : 1; /* [11..11] Host Negotiation Protocol (HNP) */ + uint16_t : 4; } DVSTCTR0_b; }; volatile const uint16_t RESERVED; @@ -214,15 +210,15 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t CURPIPE : 4; /* [3..0] CFIFO Port Access Pipe Specification */ - uint16_t : 1; - volatile uint16_t ISEL : 1; /* [5..5] CFIFO Port Access Direction When DCP is Selected */ - uint16_t : 2; - volatile uint16_t BIGEND : 1; /* [8..8] CFIFO Port Endian Control */ - uint16_t : 1; - volatile uint16_t MBW : 2; /* [11..10] CFIFO Port Access Bit Width */ - uint16_t : 2; - volatile uint16_t REW : 1; /* [14..14] Buffer Pointer Rewind */ - volatile uint16_t RCNT : 1; /* [15..15] Read Count Mode */ + uint16_t : 1; + volatile uint16_t ISEL : 1; /* [5..5] CFIFO Port Access Direction When DCP is Selected */ + uint16_t : 2; + volatile uint16_t BIGEND : 1; /* [8..8] CFIFO Port Endian Control */ + uint16_t : 1; + volatile uint16_t MBW : 2; /* [11..10] CFIFO Port Access Bit Width */ + uint16_t : 2; + volatile uint16_t REW : 1; /* [14..14] Buffer Pointer Rewind */ + volatile uint16_t RCNT : 1; /* [15..15] Read Count Mode */ } CFIFOSEL_b; }; @@ -230,12 +226,11 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t CFIFOCTR; /* (@ 0x00000022) CFIFO Port Control Register */ struct { - volatile const uint16_t - DTLN : 12; /* [11..0] Receive Data LengthIndicates the length of the receive data. */ - uint16_t : 1; - volatile const uint16_t FRDY : 1; /* [13..13] FIFO Port Ready */ - volatile uint16_t BCLR : 1; /* [14..14] CPU Buffer ClearNote: Only 0 can be read. */ - volatile uint16_t BVAL : 1; /* [15..15] Buffer Memory Valid Flag */ + volatile const uint16_t DTLN : 12; /* [11..0] Receive Data LengthIndicates the length of the receive data. */ + uint16_t : 1; + volatile const uint16_t FRDY : 1; /* [13..13] FIFO Port Ready */ + volatile uint16_t BCLR : 1; /* [14..14] CPU Buffer ClearNote: Only 0 can be read. */ + volatile uint16_t BVAL : 1; /* [15..15] Buffer Memory Valid Flag */ } CFIFOCTR_b; }; volatile const uint32_t RESERVED6; @@ -245,15 +240,14 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t CURPIPE : 4; /* [3..0] FIFO Port Access Pipe Specification */ - uint16_t : 4; - volatile uint16_t BIGEND : 1; /* [8..8] FIFO Port Endian Control */ - uint16_t : 1; - volatile uint16_t MBW : 2; /* [11..10] FIFO Port Access Bit Width */ - volatile uint16_t DREQE : 1; /* [12..12] DMA/DTC Transfer Request Enable */ - volatile uint16_t - DCLRM : 1; /* [13..13] Auto Buffer Memory Clear Mode Accessed after Specified Pipe Data is Read */ - volatile uint16_t REW : 1; /* [14..14] Buffer Pointer RewindNote: Only 0 can be read. */ - volatile uint16_t RCNT : 1; /* [15..15] Read Count Mode */ + uint16_t : 4; + volatile uint16_t BIGEND : 1; /* [8..8] FIFO Port Endian Control */ + uint16_t : 1; + volatile uint16_t MBW : 2; /* [11..10] FIFO Port Access Bit Width */ + volatile uint16_t DREQE : 1; /* [12..12] DMA/DTC Transfer Request Enable */ + volatile uint16_t DCLRM : 1; /* [13..13] Auto Buffer Memory Clear Mode Accessed after Specified Pipe Data is Read */ + volatile uint16_t REW : 1; /* [14..14] Buffer Pointer RewindNote: Only 0 can be read. */ + volatile uint16_t RCNT : 1; /* [15..15] Read Count Mode */ } D0FIFOSEL_b; }; @@ -261,12 +255,11 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t D0FIFOCTR; /* (@ 0x0000002A) D0FIFO Port Control Register */ struct { - volatile const uint16_t - DTLN : 12; /* [11..0] Receive Data LengthIndicates the length of the receive data. */ - uint16_t : 1; - volatile const uint16_t FRDY : 1; /* [13..13] FIFO Port Ready */ - volatile uint16_t BCLR : 1; /* [14..14] CPU Buffer ClearNote: Only 0 can be read. */ - volatile uint16_t BVAL : 1; /* [15..15] Buffer Memory Valid Flag */ + volatile const uint16_t DTLN : 12; /* [11..0] Receive Data LengthIndicates the length of the receive data. */ + uint16_t : 1; + volatile const uint16_t FRDY : 1; /* [13..13] FIFO Port Ready */ + volatile uint16_t BCLR : 1; /* [14..14] CPU Buffer ClearNote: Only 0 can be read. */ + volatile uint16_t BVAL : 1; /* [15..15] Buffer Memory Valid Flag */ } D0FIFOCTR_b; }; @@ -275,15 +268,14 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t CURPIPE : 4; /* [3..0] FIFO Port Access Pipe Specification */ - uint16_t : 4; - volatile uint16_t BIGEND : 1; /* [8..8] FIFO Port Endian Control */ - uint16_t : 1; - volatile uint16_t MBW : 2; /* [11..10] FIFO Port Access Bit Width */ - volatile uint16_t DREQE : 1; /* [12..12] DMA/DTC Transfer Request Enable */ - volatile uint16_t - DCLRM : 1; /* [13..13] Auto Buffer Memory Clear Mode Accessed after Specified Pipe Data is Read */ - volatile uint16_t REW : 1; /* [14..14] Buffer Pointer Rewind */ - volatile uint16_t RCNT : 1; /* [15..15] Read Count Mode */ + uint16_t : 4; + volatile uint16_t BIGEND : 1; /* [8..8] FIFO Port Endian Control */ + uint16_t : 1; + volatile uint16_t MBW : 2; /* [11..10] FIFO Port Access Bit Width */ + volatile uint16_t DREQE : 1; /* [12..12] DMA/DTC Transfer Request Enable */ + volatile uint16_t DCLRM : 1; /* [13..13] Auto Buffer Memory Clear Mode Accessed after Specified Pipe Data is Read */ + volatile uint16_t REW : 1; /* [14..14] Buffer Pointer Rewind */ + volatile uint16_t RCNT : 1; /* [15..15] Read Count Mode */ } D1FIFOSEL_b; }; @@ -291,12 +283,11 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t D1FIFOCTR; /* (@ 0x0000002E) D1FIFO Port Control Register */ struct { - volatile const uint16_t - DTLN : 12; /* [11..0] Receive Data LengthIndicates the length of the receive data. */ - uint16_t : 1; - volatile const uint16_t FRDY : 1; /* [13..13] FIFO Port Ready */ - volatile uint16_t BCLR : 1; /* [14..14] CPU Buffer ClearNote: Only 0 can be read. */ - volatile uint16_t BVAL : 1; /* [15..15] Buffer Memory Valid Flag */ + volatile const uint16_t DTLN : 12; /* [11..0] Receive Data LengthIndicates the length of the receive data. */ + uint16_t : 1; + volatile const uint16_t FRDY : 1; /* [13..13] FIFO Port Ready */ + volatile uint16_t BCLR : 1; /* [14..14] CPU Buffer ClearNote: Only 0 can be read. */ + volatile uint16_t BVAL : 1; /* [15..15] Buffer Memory Valid Flag */ } D1FIFOCTR_b; }; @@ -308,11 +299,11 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t BRDYE : 1; /* [8..8] Buffer Ready Interrupt Enable */ volatile uint16_t NRDYE : 1; /* [9..9] Buffer Not Ready Response Interrupt Enable */ volatile uint16_t BEMPE : 1; /* [10..10] Buffer Empty Interrupt Enable */ - volatile uint16_t CTRE : 1; /* [11..11] Control Transfer Stage Transition Interrupt Enable */ - volatile uint16_t DVSE : 1; /* [12..12] Device State Transition Interrupt Enable */ - volatile uint16_t SOFE : 1; /* [13..13] Frame Number Update Interrupt Enable */ - volatile uint16_t RSME : 1; /* [14..14] Resume Interrupt Enable */ - volatile uint16_t VBSE : 1; /* [15..15] VBUS Interrupt Enable */ + volatile uint16_t CTRE : 1; /* [11..11] Control Transfer Stage Transition Interrupt Enable */ + volatile uint16_t DVSE : 1; /* [12..12] Device State Transition Interrupt Enable */ + volatile uint16_t SOFE : 1; /* [13..13] Frame Number Update Interrupt Enable */ + volatile uint16_t RSME : 1; /* [14..14] Resume Interrupt Enable */ + volatile uint16_t VBSE : 1; /* [15..15] VBUS Interrupt Enable */ } INTENB0_b; }; @@ -321,16 +312,16 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t PDDETINTE0 : 1; /* [0..0] PDDETINT0 Detection Interrupt Enable */ - uint16_t : 3; - volatile uint16_t SACKE : 1; /* [4..4] Setup Transaction Normal Response Interrupt Enable */ - volatile uint16_t SIGNE : 1; /* [5..5] Setup Transaction Error Interrupt Enable */ - volatile uint16_t EOFERRE : 1; /* [6..6] EOF Error Detection Interrupt Enable */ - uint16_t : 4; - volatile uint16_t ATTCHE : 1; /* [11..11] Connection Detection Interrupt Enable */ - volatile uint16_t DTCHE : 1; /* [12..12] Disconnection Detection Interrupt Enable */ - uint16_t : 1; - volatile uint16_t BCHGE : 1; /* [14..14] USB Bus Change Interrupt Enable */ - volatile uint16_t OVRCRE : 1; /* [15..15] Overcurrent Input Change Interrupt Enable */ + uint16_t : 3; + volatile uint16_t SACKE : 1; /* [4..4] Setup Transaction Normal Response Interrupt Enable */ + volatile uint16_t SIGNE : 1; /* [5..5] Setup Transaction Error Interrupt Enable */ + volatile uint16_t EOFERRE : 1; /* [6..6] EOF Error Detection Interrupt Enable */ + uint16_t : 4; + volatile uint16_t ATTCHE : 1; /* [11..11] Connection Detection Interrupt Enable */ + volatile uint16_t DTCHE : 1; /* [12..12] Disconnection Detection Interrupt Enable */ + uint16_t : 1; + volatile uint16_t BCHGE : 1; /* [14..14] USB Bus Change Interrupt Enable */ + volatile uint16_t OVRCRE : 1; /* [15..15] Overcurrent Input Change Interrupt Enable */ } INTENB1_b; }; volatile const uint16_t RESERVED7; @@ -393,12 +384,12 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t SOFCFG; /* (@ 0x0000003C) SOF Output Configuration Register */ struct { - uint16_t : 4; + uint16_t : 4; volatile const uint16_t EDGESTS : 1; /* [4..4] Edge Interrupt Output Status Monitor */ - volatile uint16_t INTL : 1; /* [5..5] Interrupt Output Sense Select */ - volatile uint16_t BRDYM : 1; /* [6..6] BRDY Interrupt Status Clear Timing */ - uint16_t : 1; - volatile uint16_t TRNENSEL : 1; /* [8..8] Transaction-Enabled Time Select */ + volatile uint16_t INTL : 1; /* [5..5] Interrupt Output Sense Select */ + volatile uint16_t BRDYM : 1; /* [6..6] BRDY Interrupt Status Clear Timing */ + uint16_t : 1; + volatile uint16_t TRNENSEL : 1; /* [8..8] Transaction-Enabled Time Select */ uint16_t : 7; } SOFCFG_b; }; @@ -407,17 +398,17 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t PHYSET; /* (@ 0x0000003E) PHY Setting Register */ struct { - volatile uint16_t DIRPD : 1; /* [0..0] Power-Down Control */ + volatile uint16_t DIRPD : 1; /* [0..0] Power-Down Control */ volatile uint16_t PLLRESET : 1; /* [1..1] PLL Reset Control */ - uint16_t : 1; - volatile uint16_t CDPEN : 1; /* [3..3] Charging Downstream Port Enable */ - volatile uint16_t CLKSEL : 2; /* [5..4] Input System Clock Frequency */ - uint16_t : 2; - volatile uint16_t REPSEL : 2; /* [9..8] Terminating Resistance Adjustment Cycle */ - uint16_t : 1; + uint16_t : 1; + volatile uint16_t CDPEN : 1; /* [3..3] Charging Downstream Port Enable */ + volatile uint16_t CLKSEL : 2; /* [5..4] Input System Clock Frequency */ + uint16_t : 2; + volatile uint16_t REPSEL : 2; /* [9..8] Terminating Resistance Adjustment Cycle */ + uint16_t : 1; volatile uint16_t REPSTART : 1; /* [11..11] Forcibly Start Terminating Resistance Adjustment */ - uint16_t : 3; - volatile uint16_t HSEB : 1; /* [15..15] CL-Only Mode */ + uint16_t : 3; + volatile uint16_t HSEB : 1; /* [15..15] CL-Only Mode */ } PHYSET_b; }; @@ -425,18 +416,18 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t INTSTS0; /* (@ 0x00000040) Interrupt Status Register 0 */ struct { - volatile const uint16_t CTSQ : 3; /* [2..0] Control Transfer Stage */ - volatile uint16_t VALID : 1; /* [3..3] USB Request Reception */ - volatile const uint16_t DVSQ : 3; /* [6..4] Device State */ + volatile const uint16_t CTSQ : 3; /* [2..0] Control Transfer Stage */ + volatile uint16_t VALID : 1; /* [3..3] USB Request Reception */ + volatile const uint16_t DVSQ : 3; /* [6..4] Device State */ volatile const uint16_t VBSTS : 1; /* [7..7] VBUS Input Status */ - volatile const uint16_t BRDY : 1; /* [8..8] Buffer Ready Interrupt Status */ - volatile const uint16_t NRDY : 1; /* [9..9] Buffer Not Ready Interrupt Status */ - volatile const uint16_t BEMP : 1; /* [10..10] Buffer Empty Interrupt Status */ - volatile uint16_t CTRT : 1; /* [11..11] Control Transfer Stage Transition Interrupt Status */ - volatile uint16_t DVST : 1; /* [12..12] Device State Transition Interrupt Status */ - volatile uint16_t SOFR : 1; /* [13..13] Frame Number Refresh Interrupt Status */ - volatile uint16_t RESM : 1; /* [14..14] Resume Interrupt Status */ - volatile uint16_t VBINT : 1; /* [15..15] VBUS Interrupt Status */ + volatile const uint16_t BRDY : 1; /* [8..8] Buffer Ready Interrupt Status */ + volatile const uint16_t NRDY : 1; /* [9..9] Buffer Not Ready Interrupt Status */ + volatile const uint16_t BEMP : 1; /* [10..10] Buffer Empty Interrupt Status */ + volatile uint16_t CTRT : 1; /* [11..11] Control Transfer Stage Transition Interrupt Status */ + volatile uint16_t DVST : 1; /* [12..12] Device State Transition Interrupt Status */ + volatile uint16_t SOFR : 1; /* [13..13] Frame Number Refresh Interrupt Status */ + volatile uint16_t RESM : 1; /* [14..14] Resume Interrupt Status */ + volatile uint16_t VBINT : 1; /* [15..15] VBUS Interrupt Status */ } INTSTS0_b; }; @@ -445,19 +436,19 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t PDDETINT0 : 1; /* [0..0] PDDET0 Detection Interrupt Status */ - uint16_t : 3; - volatile uint16_t SACK : 1; /* [4..4] Setup Transaction Normal Response Interrupt Status */ - volatile uint16_t SIGN : 1; /* [5..5] Setup Transaction Error Interrupt Status */ - volatile uint16_t EOFERR : 1; /* [6..6] EOF Error Detection Interrupt Status */ - uint16_t : 1; - volatile uint16_t LPMEND : 1; /* [8..8] LPM Transaction End Interrupt Status */ - volatile uint16_t L1RSMEND : 1; /* [9..9] L1 Resume End Interrupt Status */ - uint16_t : 1; - volatile uint16_t ATTCH : 1; /* [11..11] ATTCH Interrupt Status */ - volatile uint16_t DTCH : 1; /* [12..12] USB Disconnection Detection Interrupt Status */ - uint16_t : 1; - volatile uint16_t BCHG : 1; /* [14..14] USB Bus Change Interrupt Status */ - volatile uint16_t OVRCR : 1; /* [15..15] Overcurrent Input Change Interrupt Status */ + uint16_t : 3; + volatile uint16_t SACK : 1; /* [4..4] Setup Transaction Normal Response Interrupt Status */ + volatile uint16_t SIGN : 1; /* [5..5] Setup Transaction Error Interrupt Status */ + volatile uint16_t EOFERR : 1; /* [6..6] EOF Error Detection Interrupt Status */ + uint16_t : 1; + volatile uint16_t LPMEND : 1; /* [8..8] LPM Transaction End Interrupt Status */ + volatile uint16_t L1RSMEND : 1; /* [9..9] L1 Resume End Interrupt Status */ + uint16_t : 1; + volatile uint16_t ATTCH : 1; /* [11..11] ATTCH Interrupt Status */ + volatile uint16_t DTCH : 1; /* [12..12] USB Disconnection Detection Interrupt Status */ + uint16_t : 1; + volatile uint16_t BCHG : 1; /* [14..14] USB Bus Change Interrupt Status */ + volatile uint16_t OVRCR : 1; /* [15..15] Overcurrent Input Change Interrupt Status */ } INTSTS1_b; }; volatile const uint16_t RESERVED8; @@ -521,9 +512,9 @@ typedef struct TU_ATTR_PACKED { struct { volatile const uint16_t FRNM : 11; /* [10..0] Frame NumberLatest frame number */ - uint16_t : 3; - volatile uint16_t CRCE : 1; /* [14..14] Receive Data Error */ - volatile uint16_t OVRN : 1; /* [15..15] Overrun/Underrun Detection Status */ + uint16_t : 3; + volatile uint16_t CRCE : 1; /* [14..14] Receive Data Error */ + volatile uint16_t OVRN : 1; /* [15..15] Overrun/Underrun Detection Status */ } FRMNUM_b; }; @@ -532,8 +523,8 @@ typedef struct TU_ATTR_PACKED { struct { volatile const uint16_t UFRNM : 3; /* [2..0] MicroframeIndicate the microframe number. */ - uint16_t : 12; - volatile uint16_t DVCHG : 1; /* [15..15] Device State Change */ + uint16_t : 12; + volatile uint16_t DVCHG : 1; /* [15..15] Device State Change */ } UFRMNUM_b; }; @@ -542,9 +533,9 @@ typedef struct TU_ATTR_PACKED { struct { volatile const uint16_t USBADDR : 7; /* [6..0] USB Address In device controller mode */ - uint16_t : 1; - volatile uint16_t STSRECOV0 : 3; /* [10..8] Status Recovery */ - uint16_t : 5; + uint16_t : 1; + volatile uint16_t STSRECOV0 : 3; /* [10..8] Status Recovery */ + uint16_t : 5; } USBADDR_b; }; volatile const uint16_t RESERVED9; @@ -553,9 +544,8 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t USBREQ; /* (@ 0x00000054) USB Request Type Register */ struct { - volatile uint16_t - BMREQUESTTYPE : 8; /* [7..0] Request TypeThese bits store the USB request bmRequestType value. */ - volatile uint16_t BREQUEST : 8; /* [15..8] RequestThese bits store the USB request bRequest value. */ + volatile uint16_t BMREQUESTTYPE : 8; /* [7..0] Request TypeThese bits store the USB request bmRequestType value. */ + volatile uint16_t BREQUEST : 8; /* [15..8] RequestThese bits store the USB request bRequest value. */ } USBREQ_b; }; @@ -587,12 +577,12 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t DCPCFG; /* (@ 0x0000005C) DCP Configuration Register */ struct { - uint16_t : 4; - volatile uint16_t DIR : 1; /* [4..4] Transfer Direction */ - uint16_t : 2; + uint16_t : 4; + volatile uint16_t DIR : 1; /* [4..4] Transfer Direction */ + uint16_t : 2; volatile uint16_t SHTNAK : 1; /* [7..7] Pipe Disabled at End of Transfer */ - volatile uint16_t CNTMD : 1; /* [8..8] Continuous Transfer Mode */ - uint16_t : 7; + volatile uint16_t CNTMD : 1; /* [8..8] Continuous Transfer Mode */ + uint16_t : 7; } DCPCFG_b; }; @@ -600,8 +590,8 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t DCPMAXP; /* (@ 0x0000005E) DCP Maximum Packet Size Register */ struct { - volatile uint16_t MXPS : 7; /* [6..0] Maximum Packet Size */ - uint16_t : 5; + volatile uint16_t MXPS : 7; /* [6..0] Maximum Packet Size */ + uint16_t : 5; volatile uint16_t DEVSEL : 4; /* [15..12] Device Select */ } DCPMAXP_b; }; @@ -610,18 +600,18 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t DCPCTR; /* (@ 0x00000060) DCP Control Register */ struct { - volatile uint16_t PID : 2; /* [1..0] Response PID */ - volatile uint16_t CCPL : 1; /* [2..2] Control Transfer End Enable */ - uint16_t : 2; + volatile uint16_t PID : 2; /* [1..0] Response PID */ + volatile uint16_t CCPL : 1; /* [2..2] Control Transfer End Enable */ + uint16_t : 2; volatile const uint16_t PBUSY : 1; /* [5..5] Pipe Busy */ volatile const uint16_t SQMON : 1; /* [6..6] Sequence Toggle Bit Monitor */ - volatile uint16_t SQSET : 1; /* [7..7] Sequence Toggle Bit Set */ - volatile uint16_t SQCLR : 1; /* [8..8] Sequence Toggle Bit Clear */ - uint16_t : 2; - volatile uint16_t SUREQCLR : 1; /* [11..11] SUREQ Bit Clear */ - uint16_t : 2; - volatile uint16_t SUREQ : 1; /* [14..14] Setup Token Transmission */ - volatile const uint16_t BSTS : 1; /* [15..15] Buffer Status */ + volatile uint16_t SQSET : 1; /* [7..7] Sequence Toggle Bit Set */ + volatile uint16_t SQCLR : 1; /* [8..8] Sequence Toggle Bit Clear */ + uint16_t : 2; + volatile uint16_t SUREQCLR : 1; /* [11..11] SUREQ Bit Clear */ + uint16_t : 2; + volatile uint16_t SUREQ : 1; /* [14..14] Setup Token Transmission */ + volatile const uint16_t BSTS : 1; /* [15..15] Buffer Status */ } DCPCTR_b; }; volatile const uint16_t RESERVED10; @@ -637,18 +627,18 @@ typedef struct TU_ATTR_PACKED { volatile const uint16_t RESERVED11; union { - volatile uint16_t PIPECFG; /* (@ 0x00000068) Pipe Configuration Register */ + volatile uint16_t PIPECFG; /* (@ 0x00000068) Pipe Configuration Register */ struct { - volatile uint16_t EPNUM : 4; /* [3..0] Endpoint Number */ - volatile uint16_t DIR : 1; /* [4..4] Transfer Direction */ - uint16_t : 2; + volatile uint16_t EPNUM : 4; /* [3..0] Endpoint Number */ + volatile uint16_t DIR : 1; /* [4..4] Transfer Direction */ + uint16_t : 2; volatile uint16_t SHTNAK : 1; /* [7..7] Pipe Disabled at End of Transfer */ - uint16_t : 1; - volatile uint16_t DBLB : 1; /* [9..9] Double Buffer Mode */ - volatile uint16_t BFRE : 1; /* [10..10] BRDY Interrupt Operation Specification */ - uint16_t : 3; - volatile uint16_t TYPE : 2; /* [15..14] Transfer Type */ + uint16_t : 1; + volatile uint16_t DBLB : 1; /* [9..9] Double Buffer Mode */ + volatile uint16_t BFRE : 1; /* [10..10] BRDY Interrupt Operation Specification */ + uint16_t : 3; + volatile uint16_t TYPE : 2; /* [15..14] Transfer Type */ } PIPECFG_b; }; volatile const uint16_t RESERVED12; @@ -657,8 +647,8 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t PIPEMAXP; /* (@ 0x0000006C) Pipe Maximum Packet Size Register */ struct { - volatile uint16_t MXPS : 9; /* [8..0] Maximum Packet Size */ - uint16_t : 3; + volatile uint16_t MXPS : 9; /* [8..0] Maximum Packet Size */ + uint16_t : 3; volatile uint16_t DEVSEL : 4; /* [15..12] Device Select */ } PIPEMAXP_b; }; @@ -668,29 +658,29 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t IITV : 3; /* [2..0] Interval Error Detection Interval */ - uint16_t : 9; + uint16_t : 9; volatile uint16_t IFIS : 1; /* [12..12] Isochronous IN Buffer Flush */ - uint16_t : 3; + uint16_t : 3; } PIPEPERI_b; }; union { - volatile uint16_t PIPE_CTR[9]; /* (@ 0x00000070) Pipe [0..8] Control Register */ + volatile uint16_t PIPE_CTR[9]; /* (@ 0x00000070) Pipe [0..8] Control Register */ struct { - volatile uint16_t PID : 2; /* [1..0] Response PID */ - uint16_t : 3; - volatile const uint16_t PBUSY : 1; /* [5..5] Pipe Busy */ - volatile const uint16_t SQMON : 1; /* [6..6] Sequence Toggle Bit Confirmation */ - volatile uint16_t SQSET : 1; /* [7..7] Sequence Toggle Bit Set */ - volatile uint16_t SQCLR : 1; /* [8..8] Sequence Toggle Bit Clear */ - volatile uint16_t ACLRM : 1; /* [9..9] Auto Buffer Clear Mode */ - volatile uint16_t ATREPM : 1; /* [10..10] Auto Response Mode */ - uint16_t : 1; - volatile const uint16_t CSSTS : 1; /* [12..12] CSSTS Status */ - volatile uint16_t CSCLR : 1; /* [13..13] CSPLIT Status Clear */ + volatile uint16_t PID : 2; /* [1..0] Response PID */ + uint16_t : 3; + volatile const uint16_t PBUSY : 1; /* [5..5] Pipe Busy */ + volatile const uint16_t SQMON : 1; /* [6..6] Sequence Toggle Bit Confirmation */ + volatile uint16_t SQSET : 1; /* [7..7] Sequence Toggle Bit Set */ + volatile uint16_t SQCLR : 1; /* [8..8] Sequence Toggle Bit Clear */ + volatile uint16_t ACLRM : 1; /* [9..9] Auto Buffer Clear Mode */ + volatile uint16_t ATREPM : 1; /* [10..10] Auto Response Mode */ + uint16_t : 1; + volatile const uint16_t CSSTS : 1; /* [12..12] CSSTS Status */ + volatile uint16_t CSCLR : 1; /* [13..13] CSPLIT Status Clear */ volatile const uint16_t INBUFM : 1; /* [14..14] Transmit Buffer Monitor */ - volatile const uint16_t BSTS : 1; /* [15..15] Buffer Status */ + volatile const uint16_t BSTS : 1; /* [15..15] Buffer Status */ } PIPE_CTR_b[9]; }; volatile const uint16_t RESERVED13; @@ -699,22 +689,22 @@ typedef struct TU_ATTR_PACKED { volatile const uint32_t RESERVED15[3]; union { - volatile uint16_t USBBCCTRL0; /* (@ 0x000000B0) BC Control Register 0 */ + volatile uint16_t USBBCCTRL0; /* (@ 0x000000B0) BC Control Register 0 */ struct { - volatile uint16_t RPDME0 : 1; /* [0..0] D- Pin Pull-Down Control */ - volatile uint16_t IDPSRCE0 : 1; /* [1..1] D+ Pin IDPSRC Output Control */ + volatile uint16_t RPDME0 : 1; /* [0..0] D- Pin Pull-Down Control */ + volatile uint16_t IDPSRCE0 : 1; /* [1..1] D+ Pin IDPSRC Output Control */ volatile uint16_t - IDMSINKE0 : 1; /* [2..2] D- Pin 0.6 V Input Detection (Comparator and Sink) Control */ - volatile uint16_t VDPSRCE0 : 1; /* [3..3] D+ Pin VDPSRC (0.6 V) Output Control */ + IDMSINKE0 : 1; /* [2..2] D- Pin 0.6 V Input Detection (Comparator and Sink) Control */ + volatile uint16_t VDPSRCE0 : 1; /* [3..3] D+ Pin VDPSRC (0.6 V) Output Control */ volatile uint16_t - IDPSINKE0 : 1; /* [4..4] D+ Pin 0.6 V Input Detection (Comparator and Sink) Control */ - volatile uint16_t VDMSRCE0 : 1; /* [5..5] D- Pin VDMSRC (0.6 V) Output Control */ - uint16_t : 1; - volatile uint16_t BATCHGE0 : 1; /* [7..7] BC (Battery Charger) Function Ch0 General Enable Control */ + IDPSINKE0 : 1; /* [4..4] D+ Pin 0.6 V Input Detection (Comparator and Sink) Control */ + volatile uint16_t VDMSRCE0 : 1; /* [5..5] D- Pin VDMSRC (0.6 V) Output Control */ + uint16_t : 1; + volatile uint16_t BATCHGE0 : 1; /* [7..7] BC (Battery Charger) Function Ch0 General Enable Control */ volatile const uint16_t CHGDETSTS0 : 1; /* [8..8] D- Pin 0.6 V Input Detection Status */ - volatile const uint16_t PDDETSTS0 : 1; /* [9..9] D+ Pin 0.6 V Input Detection Status */ - uint16_t : 6; + volatile const uint16_t PDDETSTS0 : 1; /* [9..9] D+ Pin 0.6 V Input Detection Status */ + uint16_t : 6; } USBBCCTRL0_b; }; volatile const uint16_t RESERVED16; @@ -736,9 +726,9 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t VDDUSBE : 1; /* [0..0] USB Reference Power Supply Circuit On/Off Control */ - uint16_t : 6; - volatile uint16_t VDCEN : 1; /* [7..7] USB Regulator On/Off Control */ - uint16_t : 8; + uint16_t : 6; + volatile uint16_t VDCEN : 1; /* [7..7] USB Regulator On/Off Control */ + uint16_t : 8; } USBMC_b; }; volatile const uint16_t RESERVED20; @@ -748,9 +738,9 @@ typedef struct TU_ATTR_PACKED { struct { uint16_t : 6; - volatile uint16_t USBSPD : 2; /* [7..6] Transfer Speed of Communication Target Device */ + volatile uint16_t USBSPD : 2; /* [7..6] Transfer Speed of Communication Target Device */ volatile uint16_t HUBPORT : 3; /* [10..8] Communication Target Connecting Hub Port */ - volatile uint16_t UPPHUB : 4; /* [14..11] Communication Target Connecting Hub Register */ + volatile uint16_t UPPHUB : 4; /* [14..11] Communication Target Connecting Hub Register */ uint16_t : 1; } DEVADD_b[10]; }; @@ -794,15 +784,15 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t BCCTRL; /* (@ 0x00000140) Battery Charging Control Register */ struct { - volatile uint16_t IDPSRCE : 1; /* [0..0] IDPSRC Control */ - volatile uint16_t IDMSINKE : 1; /* [1..1] IDMSINK Control */ - volatile uint16_t VDPSRCE : 1; /* [2..2] VDPSRC Control */ - volatile uint16_t IDPSINKE : 1; /* [3..3] IDPSINK Control */ - volatile uint16_t VDMSRCE : 1; /* [4..4] VDMSRC Control */ - volatile uint16_t DCPMODE : 1; /* [5..5] DCP Mode Control */ - uint16_t : 2; + volatile uint16_t IDPSRCE : 1; /* [0..0] IDPSRC Control */ + volatile uint16_t IDMSINKE : 1; /* [1..1] IDMSINK Control */ + volatile uint16_t VDPSRCE : 1; /* [2..2] VDPSRC Control */ + volatile uint16_t IDPSINKE : 1; /* [3..3] IDPSINK Control */ + volatile uint16_t VDMSRCE : 1; /* [4..4] VDMSRC Control */ + volatile uint16_t DCPMODE : 1; /* [5..5] DCP Mode Control */ + uint16_t : 2; volatile const uint16_t CHGDETSTS : 1; /* [8..8] CHGDET Status */ - volatile const uint16_t PDDETSTS : 1; /* [9..9] PDDET Status */ + volatile const uint16_t PDDETSTS : 1; /* [9..9] PDDET Status */ uint16_t : 6; } BCCTRL_b; }; @@ -812,14 +802,13 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t PL1CTRL1; /* (@ 0x00000144) Function L1 Control Register 1 */ struct { - volatile uint16_t L1RESPEN : 1; /* [0..0] L1 Response Enable */ - volatile uint16_t L1RESPMD : 2; /* [2..1] L1 Response Mode */ - volatile uint16_t L1NEGOMD : 1; /* [3..3] L1 Response Negotiation Control. */ - volatile const uint16_t - DVSQ : 4; /* [7..4] DVSQ Extension.DVSQ[3] is Mirror of DVSQ[2:0] in INTSTS0. */ - volatile uint16_t HIRDTHR : 4; /* [11..8] L1 Response Negotiation Threshold Value */ - uint16_t : 2; - volatile uint16_t L1EXTMD : 1; /* [14..14] PHY Control Mode at L1 Return */ + volatile uint16_t L1RESPEN : 1; /* [0..0] L1 Response Enable */ + volatile uint16_t L1RESPMD : 2; /* [2..1] L1 Response Mode */ + volatile uint16_t L1NEGOMD : 1; /* [3..3] L1 Response Negotiation Control. */ + volatile const uint16_t DVSQ : 4; /* [7..4] DVSQ Extension.DVSQ[3] is Mirror of DVSQ[2:0] in INTSTS0. */ + volatile uint16_t HIRDTHR : 4; /* [11..8] L1 Response Negotiation Threshold Value */ + uint16_t : 2; + volatile uint16_t L1EXTMD : 1; /* [14..14] PHY Control Mode at L1 Return */ uint16_t : 1; } PL1CTRL1_b; }; @@ -830,7 +819,7 @@ typedef struct TU_ATTR_PACKED { struct { uint16_t : 8; volatile uint16_t HIRDMON : 4; /* [11..8] HIRD Value Monitor */ - volatile uint16_t RWEMON : 1; /* [12..12] RWE Value Monitor */ + volatile uint16_t RWEMON : 1; /* [12..12] RWE Value Monitor */ uint16_t : 3; } PL1CTRL2_b; }; @@ -839,7 +828,7 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t HL1CTRL1; /* (@ 0x00000148) Host L1 Control Register 1 */ struct { - volatile uint16_t L1REQ : 1; /* [0..0] L1 Transition Request */ + volatile uint16_t L1REQ : 1; /* [0..0] L1 Transition Request */ volatile const uint16_t L1STATUS : 2; /* [2..1] L1 Request Completion Status */ uint16_t : 13; } HL1CTRL1_b; @@ -850,11 +839,11 @@ typedef struct TU_ATTR_PACKED { struct { volatile uint16_t L1ADDR : 4; /* [3..0] LPM Token DeviceAddress */ - uint16_t : 4; - volatile uint16_t HIRD : 4; /* [11..8] LPM Token HIRD */ - volatile uint16_t L1RWE : 1; /* [12..12] LPM Token L1 Remote Wake Enable */ - uint16_t : 2; - volatile uint16_t BESL : 1; /* [15..15] BESL & Alternate HIRD */ + uint16_t : 4; + volatile uint16_t HIRD : 4; /* [11..8] LPM Token HIRD */ + volatile uint16_t L1RWE : 1; /* [12..12] LPM Token L1 Remote Wake Enable */ + uint16_t : 2; + volatile uint16_t BESL : 1; /* [15..15] BESL & Alternate HIRD */ } HL1CTRL2_b; }; volatile const uint32_t RESERVED25[5]; @@ -864,13 +853,10 @@ typedef struct TU_ATTR_PACKED { struct { uint32_t : 20; - volatile const uint32_t - DOVCAHM : 1; /* [20..20] OVRCURA InputIndicates OVRCURA input signal on the HS side of USB port. */ - volatile const uint32_t - DOVCBHM : 1; /* [21..21] OVRCURB InputIndicates OVRCURB input signal on the HS side of USB port. */ - uint32_t : 1; - volatile const uint32_t - DVBSTSHM : 1; /* [23..23] VBUS InputIndicates VBUS input signal on the HS side of USB port. */ + volatile const uint32_t DOVCAHM : 1; /* [20..20] OVRCURA InputIndicates OVRCURA input signal on the HS side of USB port. */ + volatile const uint32_t DOVCBHM : 1; /* [21..21] OVRCURB InputIndicates OVRCURB input signal on the HS side of USB port. */ + uint32_t : 1; + volatile const uint32_t DVBSTSHM : 1; /* [23..23] VBUS InputIndicates VBUS input signal on the HS side of USB port. */ uint32_t : 8; } DPUSR0R_b; }; @@ -880,14 +866,14 @@ typedef struct TU_ATTR_PACKED { struct { uint32_t : 4; - volatile uint32_t DOVCAHE : 1; /* [4..4] OVRCURA Interrupt Enable Clear */ - volatile uint32_t DOVCBHE : 1; /* [5..5] OVRCURB Interrupt Enable Clear */ - uint32_t : 1; - volatile uint32_t DVBSTSHE : 1; /* [7..7] VBUS Interrupt Enable/Clear */ - uint32_t : 12; - volatile const uint32_t DOVCAH : 1; /* [20..20] Indication of Return from OVRCURA Interrupt Source */ - volatile const uint32_t DOVCBH : 1; /* [21..21] Indication of Return from OVRCURB Interrupt Source */ - uint32_t : 1; + volatile uint32_t DOVCAHE : 1; /* [4..4] OVRCURA Interrupt Enable Clear */ + volatile uint32_t DOVCBHE : 1; /* [5..5] OVRCURB Interrupt Enable Clear */ + uint32_t : 1; + volatile uint32_t DVBSTSHE : 1; /* [7..7] VBUS Interrupt Enable/Clear */ + uint32_t : 12; + volatile const uint32_t DOVCAH : 1; /* [20..20] Indication of Return from OVRCURA Interrupt Source */ + volatile const uint32_t DOVCBH : 1; /* [21..21] Indication of Return from OVRCURB Interrupt Source */ + uint32_t : 1; volatile const uint32_t DVBSTSH : 1; /* [23..23] Indication of Return from VBUS Interrupt Source */ uint32_t : 8; } DPUSR1R_b; @@ -899,14 +885,12 @@ typedef struct TU_ATTR_PACKED { struct { volatile const uint16_t DPINT : 1; /* [0..0] Indication of Return from DP Interrupt Source */ volatile const uint16_t DMINT : 1; /* [1..1] Indication of Return from DM Interrupt Source */ - uint16_t : 2; - volatile const uint16_t - DPVAL : 1; /* [4..4] DP InputIndicates DP input signal on the HS side of USB port. */ - volatile const uint16_t - DMVAL : 1; /* [5..5] DM InputIndicates DM input signal on the HS side of USB port. */ - uint16_t : 2; - volatile uint16_t DPINTE : 1; /* [8..8] DP Interrupt Enable Clear */ - volatile uint16_t DMINTE : 1; /* [9..9] DM Interrupt Enable Clear */ + uint16_t : 2; + volatile const uint16_t DPVAL : 1; /* [4..4] DP InputIndicates DP input signal on the HS side of USB port. */ + volatile const uint16_t DMVAL : 1; /* [5..5] DM InputIndicates DM input signal on the HS side of USB port. */ + uint16_t : 2; + volatile uint16_t DPINTE : 1; /* [8..8] DP Interrupt Enable Clear */ + volatile uint16_t DMINTE : 1; /* [9..9] DM Interrupt Enable Clear */ uint16_t : 6; } DPUSR2R_b; }; @@ -915,7 +899,7 @@ typedef struct TU_ATTR_PACKED { volatile uint16_t DPUSRCR; /* (@ 0x0000016A) Deep Standby USB Suspend/Resume Command Register */ struct { - volatile uint16_t FIXPHY : 1; /* [0..0] USB Transceiver Control Fix */ + volatile uint16_t FIXPHY : 1; /* [0..0] USB Transceiver Control Fix */ volatile uint16_t FIXPHYPD : 1; /* [1..1] USB Transceiver Control Fix for PLL */ uint16_t : 14; } DPUSRCR_b; @@ -927,22 +911,19 @@ typedef struct TU_ATTR_PACKED { DPUSR0R_FS; /* (@ 0x00000400) Deep Software Standby USB Transceiver Control/Pin Monitor Register */ struct { - volatile uint32_t SRPC0 : 1; /* [0..0] USB Single End Receiver Control */ - volatile uint32_t RPUE0 : 1; /* [1..1] DP Pull-Up Resistor Control */ - uint32_t : 1; - volatile uint32_t DRPD0 : 1; /* [3..3] D+/D- Pull-Down Resistor Control */ - volatile uint32_t FIXPHY0 : 1; /* [4..4] USB Transceiver Output Fix */ - uint32_t : 11; - volatile const uint32_t DP0 : 1; /* [16..16] USB0 D+ InputIndicates the D+ input signal of the USB. */ - volatile const uint32_t DM0 : 1; /* [17..17] USB D-InputIndicates the D- input signal of the USB. */ - uint32_t : 2; - volatile const uint32_t - DOVCA0 : 1; /* [20..20] USB OVRCURA InputIndicates the OVRCURA input signal of the USB. */ - volatile const uint32_t - DOVCB0 : 1; /* [21..21] USB OVRCURB InputIndicates the OVRCURB input signal of the USB. */ - uint32_t : 1; - volatile const uint32_t - DVBSTS0 : 1; /* [23..23] USB VBUS InputIndicates the VBUS input signal of the USB. */ + volatile uint32_t SRPC0 : 1; /* [0..0] USB Single End Receiver Control */ + volatile uint32_t RPUE0 : 1; /* [1..1] DP Pull-Up Resistor Control */ + uint32_t : 1; + volatile uint32_t DRPD0 : 1; /* [3..3] D+/D- Pull-Down Resistor Control */ + volatile uint32_t FIXPHY0 : 1; /* [4..4] USB Transceiver Output Fix */ + uint32_t : 11; + volatile const uint32_t DP0 : 1; /* [16..16] USB0 D+ InputIndicates the D+ input signal of the USB. */ + volatile const uint32_t DM0 : 1; /* [17..17] USB D-InputIndicates the D- input signal of the USB. */ + uint32_t : 2; + volatile const uint32_t DOVCA0 : 1; /* [20..20] USB OVRCURA InputIndicates the OVRCURA input signal of the USB. */ + volatile const uint32_t DOVCB0 : 1; /* [21..21] USB OVRCURB InputIndicates the OVRCURB input signal of the USB. */ + uint32_t : 1; + volatile const uint32_t DVBSTS0 : 1; /* [23..23] USB VBUS InputIndicates the VBUS input signal of the USB. */ uint32_t : 8; } DPUSR0R_FS_b; }; @@ -951,88 +932,26 @@ typedef struct TU_ATTR_PACKED { volatile uint32_t DPUSR1R_FS; /* (@ 0x00000404) Deep Software Standby USB Suspend/Resume Interrupt Register */ struct { - volatile uint32_t DPINTE0 : 1; /* [0..0] USB DP Interrupt Enable/Clear */ - volatile uint32_t DMINTE0 : 1; /* [1..1] USB DM Interrupt Enable/Clear */ - uint32_t : 2; - volatile uint32_t DOVRCRAE0 : 1; /* [4..4] USB OVRCURA Interrupt Enable/Clear */ - volatile uint32_t DOVRCRBE0 : 1; /* [5..5] USB OVRCURB Interrupt Enable/Clear */ - uint32_t : 1; - volatile uint32_t DVBSE0 : 1; /* [7..7] USB VBUS Interrupt Enable/Clear */ - uint32_t : 8; - volatile const uint32_t DPINT0 : 1; /* [16..16] USB DP Interrupt Source Recovery */ - volatile const uint32_t DMINT0 : 1; /* [17..17] USB DM Interrupt Source Recovery */ - uint32_t : 2; + volatile uint32_t DPINTE0 : 1; /* [0..0] USB DP Interrupt Enable/Clear */ + volatile uint32_t DMINTE0 : 1; /* [1..1] USB DM Interrupt Enable/Clear */ + uint32_t : 2; + volatile uint32_t DOVRCRAE0 : 1; /* [4..4] USB OVRCURA Interrupt Enable/Clear */ + volatile uint32_t DOVRCRBE0 : 1; /* [5..5] USB OVRCURB Interrupt Enable/Clear */ + uint32_t : 1; + volatile uint32_t DVBSE0 : 1; /* [7..7] USB VBUS Interrupt Enable/Clear */ + uint32_t : 8; + volatile const uint32_t DPINT0 : 1; /* [16..16] USB DP Interrupt Source Recovery */ + volatile const uint32_t DMINT0 : 1; /* [17..17] USB DM Interrupt Source Recovery */ + uint32_t : 2; volatile const uint32_t DOVRCRA0 : 1; /* [20..20] USB OVRCURA Interrupt Source Recovery */ volatile const uint32_t DOVRCRB0 : 1; /* [21..21] USB OVRCURB Interrupt Source Recovery */ - uint32_t : 1; - volatile const uint32_t DVBINT0 : 1; /* [23..23] USB VBUS Interrupt Source Recovery */ + uint32_t : 1; + volatile const uint32_t DVBINT0 : 1; /* [23..23] USB VBUS Interrupt Source Recovery */ uint32_t : 8; } DPUSR1R_FS_b; }; } LINK_REG_t; /* Size = 1032 (0x408) */ -TU_VERIFY_STATIC(offsetof(LINK_REG_t, SYSCFG) == 0x00000000, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BUSWAIT) == 0x00000002, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, SYSSTS0) == 0x00000004, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PLLSTA) == 0x00000006, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DVSTCTR0) == 0x00000008, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, TESTMODE) == 0x0000000C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFO) == 0x00000014, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFO) == 0x00000018, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFO) == 0x0000001C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFOSEL) == 0x00000020, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFOCTR) == 0x00000022, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFOSEL) == 0x00000028, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFOCTR) == 0x0000002A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFOSEL) == 0x0000002C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFOCTR) == 0x0000002E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTENB0) == 0x00000030, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTENB1) == 0x00000032, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BRDYENB) == 0x00000036, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, NRDYENB) == 0x00000038, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BEMPENB) == 0x0000003A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, SOFCFG) == 0x0000003C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PHYSET) == 0x0000003E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTSTS0) == 0x00000040, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTSTS1) == 0x00000042, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BRDYSTS) == 0x00000046, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, NRDYSTS) == 0x00000048, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BEMPSTS) == 0x0000004A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, FRMNUM) == 0x0000004C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, UFRMNUM) == 0x0000004E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBADDR) == 0x00000050, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBREQ) == 0x00000054, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBVAL) == 0x00000056, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBINDX) == 0x00000058, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBLENG) == 0x0000005A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPCFG) == 0x0000005C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPMAXP) == 0x0000005E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPCTR) == 0x00000060, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPESEL) == 0x00000064, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPECFG) == 0x00000068, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPEMAXP) == 0x0000006C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPEPERI) == 0x0000006E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPE_CTR) == 0x00000070, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPE_TR) == 0x00000090, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBBCCTRL0) == 0x000000B0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, UCKSEL) == 0x000000C4, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBMC) == 0x000000CC, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DEVADD) == 0x000000D0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PHYSLEW) == 0x000000F0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, LPCTRL) == 0x00000100, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, LPSTS) == 0x00000102, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, BCCTRL) == 0x00000140, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PL1CTRL1) == 0x00000144, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, PL1CTRL2) == 0x00000146, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, HL1CTRL1) == 0x00000148, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, HL1CTRL2) == 0x0000014A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR0R) == 0x00000160, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR1R) == 0x00000164, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR2R) == 0x00000168, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSRCR) == 0x0000016A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR0R_FS) == 0x00000400, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR1R_FS) == 0x00000404, "incorrect offset"); - TU_ATTR_PACKED_END /* End of definition of packed structs (used by the CCRX toolchain) */ TU_ATTR_BIT_FIELD_ORDER_END @@ -1040,582 +959,708 @@ TU_ATTR_BIT_FIELD_ORDER_END /* Register Bit Definitions */ /*--------------------------------------------------------------------*/ -/* PIPE_TR */ -/* E */ -#define LINK_REG_PIPE_TR_E_TRENB_Pos (9UL) /* TRENB (Bit 9) */ -#define LINK_REG_PIPE_TR_E_TRENB_Msk (0x200UL) /* TRENB (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_TR_E_TRCLR_Pos (8UL) /* TRCLR (Bit 8) */ -#define LINK_REG_PIPE_TR_E_TRCLR_Msk (0x100UL) /* TRCLR (Bitfield-Mask: 0x01) */ -/* N */ -#define LINK_REG_PIPE_TR_N_TRNCNT_Pos (0UL) /* TRNCNT (Bit 0) */ -#define LINK_REG_PIPE_TR_N_TRNCNT_Msk (0xffffUL) /* TRNCNT (Bitfield-Mask: 0xffff) */ - -/* LINK_REG */ -/* SYSCFG */ -#define LINK_REG_SYSCFG_SCKE_Pos (10UL) /* SCKE (Bit 10) */ -#define LINK_REG_SYSCFG_SCKE_Msk (0x400UL) /* SCKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_CNEN_Pos (8UL) /* CNEN (Bit 8) */ -#define LINK_REG_SYSCFG_CNEN_Msk (0x100UL) /* CNEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DCFM_Pos (6UL) /* DCFM (Bit 6) */ -#define LINK_REG_SYSCFG_DCFM_Msk (0x40UL) /* DCFM (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DRPD_Pos (5UL) /* DRPD (Bit 5) */ -#define LINK_REG_SYSCFG_DRPD_Msk (0x20UL) /* DRPD (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DPRPU_Pos (4UL) /* DPRPU (Bit 4) */ -#define LINK_REG_SYSCFG_DPRPU_Msk (0x10UL) /* DPRPU (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_DMRPU_Pos (3UL) /* DMRPU (Bit 3) */ -#define LINK_REG_SYSCFG_DMRPU_Msk (0x8UL) /* DMRPU (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSCFG_USBE_Pos (0UL) /* USBE (Bit 0) */ -#define LINK_REG_SYSCFG_USBE_Msk (0x1UL) /* USBE (Bitfield-Mask: 0x01) */ -/* BUSWAIT */ -#define LINK_REG_BUSWAIT_BWAIT_Pos (0UL) /* BWAIT (Bit 0) */ -#define LINK_REG_BUSWAIT_BWAIT_Msk (0xfUL) /* BWAIT (Bitfield-Mask: 0x0f) */ -/* SYSSTS0 */ -#define LINK_REG_SYSSTS0_OVCMON_Pos (14UL) /* OVCMON (Bit 14) */ -#define LINK_REG_SYSSTS0_OVCMON_Msk (0xc000UL) /* OVCMON (Bitfield-Mask: 0x03) */ -#define LINK_REG_SYSSTS0_HTACT_Pos (6UL) /* HTACT (Bit 6) */ -#define LINK_REG_SYSSTS0_HTACT_Msk (0x40UL) /* HTACT (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSSTS0_SOFEA_Pos (5UL) /* SOFEA (Bit 5) */ -#define LINK_REG_SYSSTS0_SOFEA_Msk (0x20UL) /* SOFEA (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSSTS0_IDMON_Pos (2UL) /* IDMON (Bit 2) */ -#define LINK_REG_SYSSTS0_IDMON_Msk (0x4UL) /* IDMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_SYSSTS0_LNST_Pos (0UL) /* LNST (Bit 0) */ -#define LINK_REG_SYSSTS0_LNST_Msk (0x3UL) /* LNST (Bitfield-Mask: 0x03) */ -/* PLLSTA */ -#define LINK_REG_PLLSTA_PLLLOCK_Pos (0UL) /* PLLLOCK (Bit 0) */ -#define LINK_REG_PLLSTA_PLLLOCK_Msk (0x1UL) /* PLLLOCK (Bitfield-Mask: 0x01) */ -/* DVSTCTR0 */ -#define LINK_REG_DVSTCTR0_HNPBTOA_Pos (11UL) /* HNPBTOA (Bit 11) */ -#define LINK_REG_DVSTCTR0_HNPBTOA_Msk (0x800UL) /* HNPBTOA (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_EXICEN_Pos (10UL) /* EXICEN (Bit 10) */ -#define LINK_REG_DVSTCTR0_EXICEN_Msk (0x400UL) /* EXICEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_VBUSEN_Pos (9UL) /* VBUSEN (Bit 9) */ -#define LINK_REG_DVSTCTR0_VBUSEN_Msk (0x200UL) /* VBUSEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_WKUP_Pos (8UL) /* WKUP (Bit 8) */ -#define LINK_REG_DVSTCTR0_WKUP_Msk (0x100UL) /* WKUP (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_RWUPE_Pos (7UL) /* RWUPE (Bit 7) */ -#define LINK_REG_DVSTCTR0_RWUPE_Msk (0x80UL) /* RWUPE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_USBRST_Pos (6UL) /* USBRST (Bit 6) */ -#define LINK_REG_DVSTCTR0_USBRST_Msk (0x40UL) /* USBRST (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_RESUME_Pos (5UL) /* RESUME (Bit 5) */ -#define LINK_REG_DVSTCTR0_RESUME_Msk (0x20UL) /* RESUME (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_UACT_Pos (4UL) /* UACT (Bit 4) */ -#define LINK_REG_DVSTCTR0_UACT_Msk (0x10UL) /* UACT (Bitfield-Mask: 0x01) */ -#define LINK_REG_DVSTCTR0_RHST_Pos (0UL) /* RHST (Bit 0) */ -#define LINK_REG_DVSTCTR0_RHST_Msk (0x7UL) /* RHST (Bitfield-Mask: 0x07) */ -/* TESTMODE */ -#define LINK_REG_TESTMODE_UTST_Pos (0UL) /* UTST (Bit 0) */ -#define LINK_REG_TESTMODE_UTST_Msk (0xfUL) /* UTST (Bitfield-Mask: 0x0f) */ -/* CFIFOSEL */ -#define LINK_REG_CFIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ -#define LINK_REG_CFIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ -#define LINK_REG_CFIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ -#define LINK_REG_CFIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ -#define LINK_REG_CFIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ -#define LINK_REG_CFIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_ISEL_Pos (5UL) /* ISEL (Bit 5) */ -#define LINK_REG_CFIFOSEL_ISEL_Msk (0x20UL) /* ISEL (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ -#define LINK_REG_CFIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ -/* CFIFOCTR */ -#define LINK_REG_CFIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ -#define LINK_REG_CFIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ -#define LINK_REG_CFIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ -#define LINK_REG_CFIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_CFIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ -#define LINK_REG_CFIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ -/* D0FIFOSEL */ -#define LINK_REG_D0FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ -#define LINK_REG_D0FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ -#define LINK_REG_D0FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ -#define LINK_REG_D0FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ -#define LINK_REG_D0FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ -#define LINK_REG_D0FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ -#define LINK_REG_D0FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ -#define LINK_REG_D0FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ -#define LINK_REG_D0FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ -/* D0FIFOCTR */ -#define LINK_REG_D0FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ -#define LINK_REG_D0FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ -#define LINK_REG_D0FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ -#define LINK_REG_D0FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_D0FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ -#define LINK_REG_D0FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ -/* D1FIFOSEL */ -#define LINK_REG_D1FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ -#define LINK_REG_D1FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ -#define LINK_REG_D1FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ -#define LINK_REG_D1FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ -#define LINK_REG_D1FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ -#define LINK_REG_D1FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ -#define LINK_REG_D1FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ -#define LINK_REG_D1FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ -#define LINK_REG_D1FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ -/* D1FIFOCTR */ -#define LINK_REG_D1FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ -#define LINK_REG_D1FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ -#define LINK_REG_D1FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ -#define LINK_REG_D1FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_D1FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ -#define LINK_REG_D1FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ -/* INTENB0 */ -#define LINK_REG_INTENB0_VBSE_Pos (15UL) /* VBSE (Bit 15) */ -#define LINK_REG_INTENB0_VBSE_Msk (0x8000UL) /* VBSE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_RSME_Pos (14UL) /* RSME (Bit 14) */ -#define LINK_REG_INTENB0_RSME_Msk (0x4000UL) /* RSME (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_SOFE_Pos (13UL) /* SOFE (Bit 13) */ -#define LINK_REG_INTENB0_SOFE_Msk (0x2000UL) /* SOFE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_DVSE_Pos (12UL) /* DVSE (Bit 12) */ -#define LINK_REG_INTENB0_DVSE_Msk (0x1000UL) /* DVSE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_CTRE_Pos (11UL) /* CTRE (Bit 11) */ -#define LINK_REG_INTENB0_CTRE_Msk (0x800UL) /* CTRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_BEMPE_Pos (10UL) /* BEMPE (Bit 10) */ -#define LINK_REG_INTENB0_BEMPE_Msk (0x400UL) /* BEMPE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_NRDYE_Pos (9UL) /* NRDYE (Bit 9) */ -#define LINK_REG_INTENB0_NRDYE_Msk (0x200UL) /* NRDYE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB0_BRDYE_Pos (8UL) /* BRDYE (Bit 8) */ -#define LINK_REG_INTENB0_BRDYE_Msk (0x100UL) /* BRDYE (Bitfield-Mask: 0x01) */ -/* INTENB1 */ -#define LINK_REG_INTENB1_OVRCRE_Pos (15UL) /* OVRCRE (Bit 15) */ -#define LINK_REG_INTENB1_OVRCRE_Msk (0x8000UL) /* OVRCRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_BCHGE_Pos (14UL) /* BCHGE (Bit 14) */ -#define LINK_REG_INTENB1_BCHGE_Msk (0x4000UL) /* BCHGE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_DTCHE_Pos (12UL) /* DTCHE (Bit 12) */ -#define LINK_REG_INTENB1_DTCHE_Msk (0x1000UL) /* DTCHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_ATTCHE_Pos (11UL) /* ATTCHE (Bit 11) */ -#define LINK_REG_INTENB1_ATTCHE_Msk (0x800UL) /* ATTCHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_EOFERRE_Pos (6UL) /* EOFERRE (Bit 6) */ -#define LINK_REG_INTENB1_EOFERRE_Msk (0x40UL) /* EOFERRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_SIGNE_Pos (5UL) /* SIGNE (Bit 5) */ -#define LINK_REG_INTENB1_SIGNE_Msk (0x20UL) /* SIGNE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_SACKE_Pos (4UL) /* SACKE (Bit 4) */ -#define LINK_REG_INTENB1_SACKE_Msk (0x10UL) /* SACKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTENB1_PDDETINTE0_Pos (0UL) /* PDDETINTE0 (Bit 0) */ -#define LINK_REG_INTENB1_PDDETINTE0_Msk (0x1UL) /* PDDETINTE0 (Bitfield-Mask: 0x01) */ -/* BRDYENB */ -#define LINK_REG_BRDYENB_PIPEBRDYE_Pos (0UL) /* PIPEBRDYE (Bit 0) */ -#define LINK_REG_BRDYENB_PIPEBRDYE_Msk (0x1UL) /* PIPEBRDYE (Bitfield-Mask: 0x01) */ -/* NRDYENB */ -#define LINK_REG_NRDYENB_PIPENRDYE_Pos (0UL) /* PIPENRDYE (Bit 0) */ -#define LINK_REG_NRDYENB_PIPENRDYE_Msk (0x1UL) /* PIPENRDYE (Bitfield-Mask: 0x01) */ -/* BEMPENB */ -#define LINK_REG_BEMPENB_PIPEBEMPE_Pos (0UL) /* PIPEBEMPE (Bit 0) */ -#define LINK_REG_BEMPENB_PIPEBEMPE_Msk (0x1UL) /* PIPEBEMPE (Bitfield-Mask: 0x01) */ -/* SOFCFG */ -#define LINK_REG_SOFCFG_TRNENSEL_Pos (8UL) /* TRNENSEL (Bit 8) */ -#define LINK_REG_SOFCFG_TRNENSEL_Msk (0x100UL) /* TRNENSEL (Bitfield-Mask: 0x01) */ -#define LINK_REG_SOFCFG_BRDYM_Pos (6UL) /* BRDYM (Bit 6) */ -#define LINK_REG_SOFCFG_BRDYM_Msk (0x40UL) /* BRDYM (Bitfield-Mask: 0x01) */ -#define LINK_REG_SOFCFG_INTL_Pos (5UL) /* INTL (Bit 5) */ -#define LINK_REG_SOFCFG_INTL_Msk (0x20UL) /* INTL (Bitfield-Mask: 0x01) */ -#define LINK_REG_SOFCFG_EDGESTS_Pos (4UL) /* EDGESTS (Bit 4) */ -#define LINK_REG_SOFCFG_EDGESTS_Msk (0x10UL) /* EDGESTS (Bitfield-Mask: 0x01) */ -/* PHYSET */ -#define LINK_REG_PHYSET_HSEB_Pos (15UL) /* HSEB (Bit 15) */ -#define LINK_REG_PHYSET_HSEB_Msk (0x8000UL) /* HSEB (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_REPSTART_Pos (11UL) /* REPSTART (Bit 11) */ -#define LINK_REG_PHYSET_REPSTART_Msk (0x800UL) /* REPSTART (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_REPSEL_Pos (8UL) /* REPSEL (Bit 8) */ -#define LINK_REG_PHYSET_REPSEL_Msk (0x300UL) /* REPSEL (Bitfield-Mask: 0x03) */ -#define LINK_REG_PHYSET_CLKSEL_Pos (4UL) /* CLKSEL (Bit 4) */ -#define LINK_REG_PHYSET_CLKSEL_Msk (0x30UL) /* CLKSEL (Bitfield-Mask: 0x03) */ -#define LINK_REG_PHYSET_CDPEN_Pos (3UL) /* CDPEN (Bit 3) */ -#define LINK_REG_PHYSET_CDPEN_Msk (0x8UL) /* CDPEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_PLLRESET_Pos (1UL) /* PLLRESET (Bit 1) */ -#define LINK_REG_PHYSET_PLLRESET_Msk (0x2UL) /* PLLRESET (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSET_DIRPD_Pos (0UL) /* DIRPD (Bit 0) */ -#define LINK_REG_PHYSET_DIRPD_Msk (0x1UL) /* DIRPD (Bitfield-Mask: 0x01) */ -/* INTSTS0 */ -#define LINK_REG_INTSTS0_VBINT_Pos (15UL) /* VBINT (Bit 15) */ -#define LINK_REG_INTSTS0_VBINT_Msk (0x8000UL) /* VBINT (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_RESM_Pos (14UL) /* RESM (Bit 14) */ -#define LINK_REG_INTSTS0_RESM_Msk (0x4000UL) /* RESM (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_SOFR_Pos (13UL) /* SOFR (Bit 13) */ -#define LINK_REG_INTSTS0_SOFR_Msk (0x2000UL) /* SOFR (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_DVST_Pos (12UL) /* DVST (Bit 12) */ -#define LINK_REG_INTSTS0_DVST_Msk (0x1000UL) /* DVST (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_CTRT_Pos (11UL) /* CTRT (Bit 11) */ -#define LINK_REG_INTSTS0_CTRT_Msk (0x800UL) /* CTRT (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_BEMP_Pos (10UL) /* BEMP (Bit 10) */ -#define LINK_REG_INTSTS0_BEMP_Msk (0x400UL) /* BEMP (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_NRDY_Pos (9UL) /* NRDY (Bit 9) */ -#define LINK_REG_INTSTS0_NRDY_Msk (0x200UL) /* NRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_BRDY_Pos (8UL) /* BRDY (Bit 8) */ -#define LINK_REG_INTSTS0_BRDY_Msk (0x100UL) /* BRDY (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_VBSTS_Pos (7UL) /* VBSTS (Bit 7) */ -#define LINK_REG_INTSTS0_VBSTS_Msk (0x80UL) /* VBSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ -#define LINK_REG_INTSTS0_DVSQ_Msk (0x70UL) /* DVSQ (Bitfield-Mask: 0x07) */ -#define LINK_REG_INTSTS0_VALID_Pos (3UL) /* VALID (Bit 3) */ -#define LINK_REG_INTSTS0_VALID_Msk (0x8UL) /* VALID (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS0_CTSQ_Pos (0UL) /* CTSQ (Bit 0) */ -#define LINK_REG_INTSTS0_CTSQ_Msk (0x7UL) /* CTSQ (Bitfield-Mask: 0x07) */ -/* INTSTS1 */ -#define LINK_REG_INTSTS1_OVRCR_Pos (15UL) /* OVRCR (Bit 15) */ -#define LINK_REG_INTSTS1_OVRCR_Msk (0x8000UL) /* OVRCR (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_BCHG_Pos (14UL) /* BCHG (Bit 14) */ -#define LINK_REG_INTSTS1_BCHG_Msk (0x4000UL) /* BCHG (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_DTCH_Pos (12UL) /* DTCH (Bit 12) */ -#define LINK_REG_INTSTS1_DTCH_Msk (0x1000UL) /* DTCH (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_ATTCH_Pos (11UL) /* ATTCH (Bit 11) */ -#define LINK_REG_INTSTS1_ATTCH_Msk (0x800UL) /* ATTCH (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_L1RSMEND_Pos (9UL) /* L1RSMEND (Bit 9) */ -#define LINK_REG_INTSTS1_L1RSMEND_Msk (0x200UL) /* L1RSMEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_LPMEND_Pos (8UL) /* LPMEND (Bit 8) */ -#define LINK_REG_INTSTS1_LPMEND_Msk (0x100UL) /* LPMEND (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_EOFERR_Pos (6UL) /* EOFERR (Bit 6) */ -#define LINK_REG_INTSTS1_EOFERR_Msk (0x40UL) /* EOFERR (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_SIGN_Pos (5UL) /* SIGN (Bit 5) */ -#define LINK_REG_INTSTS1_SIGN_Msk (0x20UL) /* SIGN (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_SACK_Pos (4UL) /* SACK (Bit 4) */ -#define LINK_REG_INTSTS1_SACK_Msk (0x10UL) /* SACK (Bitfield-Mask: 0x01) */ -#define LINK_REG_INTSTS1_PDDETINT0_Pos (0UL) /* PDDETINT0 (Bit 0) */ -#define LINK_REG_INTSTS1_PDDETINT0_Msk (0x1UL) /* PDDETINT0 (Bitfield-Mask: 0x01) */ -/* BRDYSTS */ -#define LINK_REG_BRDYSTS_PIPEBRDY_Pos (0UL) /* PIPEBRDY (Bit 0) */ -#define LINK_REG_BRDYSTS_PIPEBRDY_Msk (0x1UL) /* PIPEBRDY (Bitfield-Mask: 0x01) */ -/* NRDYSTS */ -#define LINK_REG_NRDYSTS_PIPENRDY_Pos (0UL) /* PIPENRDY (Bit 0) */ -#define LINK_REG_NRDYSTS_PIPENRDY_Msk (0x1UL) /* PIPENRDY (Bitfield-Mask: 0x01) */ -/* BEMPSTS */ -#define LINK_REG_BEMPSTS_PIPEBEMP_Pos (0UL) /* PIPEBEMP (Bit 0) */ -#define LINK_REG_BEMPSTS_PIPEBEMP_Msk (0x1UL) /* PIPEBEMP (Bitfield-Mask: 0x01) */ -/* FRMNUM */ -#define LINK_REG_FRMNUM_OVRN_Pos (15UL) /* OVRN (Bit 15) */ -#define LINK_REG_FRMNUM_OVRN_Msk (0x8000UL) /* OVRN (Bitfield-Mask: 0x01) */ -#define LINK_REG_FRMNUM_CRCE_Pos (14UL) /* CRCE (Bit 14) */ -#define LINK_REG_FRMNUM_CRCE_Msk (0x4000UL) /* CRCE (Bitfield-Mask: 0x01) */ -#define LINK_REG_FRMNUM_FRNM_Pos (0UL) /* FRNM (Bit 0) */ -#define LINK_REG_FRMNUM_FRNM_Msk (0x7ffUL) /* FRNM (Bitfield-Mask: 0x7ff) */ -/* UFRMNUM */ -#define LINK_REG_UFRMNUM_DVCHG_Pos (15UL) /* DVCHG (Bit 15) */ -#define LINK_REG_UFRMNUM_DVCHG_Msk (0x8000UL) /* DVCHG (Bitfield-Mask: 0x01) */ -#define LINK_REG_UFRMNUM_UFRNM_Pos (0UL) /* UFRNM (Bit 0) */ -#define LINK_REG_UFRMNUM_UFRNM_Msk (0x7UL) /* UFRNM (Bitfield-Mask: 0x07) */ -/* USBADDR */ -#define LINK_REG_USBADDR_STSRECOV0_Pos (8UL) /* STSRECOV0 (Bit 8) */ -#define LINK_REG_USBADDR_STSRECOV0_Msk (0x700UL) /* STSRECOV0 (Bitfield-Mask: 0x07) */ -#define LINK_REG_USBADDR_USBADDR_Pos (0UL) /* USBADDR (Bit 0) */ -#define LINK_REG_USBADDR_USBADDR_Msk (0x7fUL) /* USBADDR (Bitfield-Mask: 0x7f) */ -/* USBREQ */ -#define LINK_REG_USBREQ_BREQUEST_Pos (8UL) /* BREQUEST (Bit 8) */ -#define LINK_REG_USBREQ_BREQUEST_Msk (0xff00UL) /* BREQUEST (Bitfield-Mask: 0xff) */ -#define LINK_REG_USBREQ_BMREQUESTTYPE_Pos (0UL) /* BMREQUESTTYPE (Bit 0) */ -#define LINK_REG_USBREQ_BMREQUESTTYPE_Msk (0xffUL) /* BMREQUESTTYPE (Bitfield-Mask: 0xff) */ -/* USBVAL */ -#define LINK_REG_USBVAL_WVALUE_Pos (0UL) /* WVALUE (Bit 0) */ -#define LINK_REG_USBVAL_WVALUE_Msk (0xffffUL) /* WVALUE (Bitfield-Mask: 0xffff) */ -/* USBINDX */ -#define LINK_REG_USBINDX_WINDEX_Pos (0UL) /* WINDEX (Bit 0) */ -#define LINK_REG_USBINDX_WINDEX_Msk (0xffffUL) /* WINDEX (Bitfield-Mask: 0xffff) */ -/* USBLENG */ -#define LINK_REG_USBLENG_WLENGTH_Pos (0UL) /* WLENGTH (Bit 0) */ -#define LINK_REG_USBLENG_WLENGTH_Msk (0xffffUL) /* WLENGTH (Bitfield-Mask: 0xffff) */ -/* DCPCFG */ -#define LINK_REG_DCPCFG_CNTMD_Pos (8UL) /* CNTMD (Bit 8) */ -#define LINK_REG_DCPCFG_CNTMD_Msk (0x100UL) /* CNTMD (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ -#define LINK_REG_DCPCFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCFG_DIR_Pos (4UL) /* DIR (Bit 4) */ -#define LINK_REG_DCPCFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ -/* DCPMAXP */ -#define LINK_REG_DCPMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ -#define LINK_REG_DCPMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ -#define LINK_REG_DCPMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ -#define LINK_REG_DCPMAXP_MXPS_Msk (0x7fUL) /* MXPS (Bitfield-Mask: 0x7f) */ -/* DCPCTR */ -#define LINK_REG_DCPCTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ -#define LINK_REG_DCPCTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SUREQ_Pos (14UL) /* SUREQ (Bit 14) */ -#define LINK_REG_DCPCTR_SUREQ_Msk (0x4000UL) /* SUREQ (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SUREQCLR_Pos (11UL) /* SUREQCLR (Bit 11) */ -#define LINK_REG_DCPCTR_SUREQCLR_Msk (0x800UL) /* SUREQCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ -#define LINK_REG_DCPCTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ -#define LINK_REG_DCPCTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ -#define LINK_REG_DCPCTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ -#define LINK_REG_DCPCTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_CCPL_Pos (2UL) /* CCPL (Bit 2) */ -#define LINK_REG_DCPCTR_CCPL_Msk (0x4UL) /* CCPL (Bitfield-Mask: 0x01) */ -#define LINK_REG_DCPCTR_PID_Pos (0UL) /* PID (Bit 0) */ -#define LINK_REG_DCPCTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ -/* PIPESEL */ -#define LINK_REG_PIPESEL_PIPESEL_Pos (0UL) /* PIPESEL (Bit 0) */ -#define LINK_REG_PIPESEL_PIPESEL_Msk (0xfUL) /* PIPESEL (Bitfield-Mask: 0x0f) */ -/* PIPECFG */ -#define LINK_REG_PIPECFG_TYPE_Pos (14UL) /* TYPE (Bit 14) */ -#define LINK_REG_PIPECFG_TYPE_Msk (0xc000UL) /* TYPE (Bitfield-Mask: 0x03) */ -#define LINK_REG_PIPECFG_BFRE_Pos (10UL) /* BFRE (Bit 10) */ -#define LINK_REG_PIPECFG_BFRE_Msk (0x400UL) /* BFRE (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_DBLB_Pos (9UL) /* DBLB (Bit 9) */ -#define LINK_REG_PIPECFG_DBLB_Msk (0x200UL) /* DBLB (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ -#define LINK_REG_PIPECFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_DIR_Pos (4UL) /* DIR (Bit 4) */ -#define LINK_REG_PIPECFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPECFG_EPNUM_Pos (0UL) /* EPNUM (Bit 0) */ -#define LINK_REG_PIPECFG_EPNUM_Msk (0xfUL) /* EPNUM (Bitfield-Mask: 0x0f) */ -/* PIPEMAXP */ -#define LINK_REG_PIPEMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ -#define LINK_REG_PIPEMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ -#define LINK_REG_PIPEMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ -#define LINK_REG_PIPEMAXP_MXPS_Msk (0x1ffUL) /* MXPS (Bitfield-Mask: 0x1ff) */ -/* PIPEPERI */ -#define LINK_REG_PIPEPERI_IFIS_Pos (12UL) /* IFIS (Bit 12) */ -#define LINK_REG_PIPEPERI_IFIS_Msk (0x1000UL) /* IFIS (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPEPERI_IITV_Pos (0UL) /* IITV (Bit 0) */ -#define LINK_REG_PIPEPERI_IITV_Msk (0x7UL) /* IITV (Bitfield-Mask: 0x07) */ -/* PIPE_CTR */ -#define LINK_REG_PIPE_CTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ -#define LINK_REG_PIPE_CTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_INBUFM_Pos (14UL) /* INBUFM (Bit 14) */ -#define LINK_REG_PIPE_CTR_INBUFM_Msk (0x4000UL) /* INBUFM (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_CSCLR_Pos (13UL) /* CSCLR (Bit 13) */ -#define LINK_REG_PIPE_CTR_CSCLR_Msk (0x2000UL) /* CSCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_CSSTS_Pos (12UL) /* CSSTS (Bit 12) */ -#define LINK_REG_PIPE_CTR_CSSTS_Msk (0x1000UL) /* CSSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_ATREPM_Pos (10UL) /* ATREPM (Bit 10) */ -#define LINK_REG_PIPE_CTR_ATREPM_Msk (0x400UL) /* ATREPM (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_ACLRM_Pos (9UL) /* ACLRM (Bit 9) */ -#define LINK_REG_PIPE_CTR_ACLRM_Msk (0x200UL) /* ACLRM (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ -#define LINK_REG_PIPE_CTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ -#define LINK_REG_PIPE_CTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ -#define LINK_REG_PIPE_CTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ -#define LINK_REG_PIPE_CTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ -#define LINK_REG_PIPE_CTR_PID_Pos (0UL) /* PID (Bit 0) */ -#define LINK_REG_PIPE_CTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ -/* DEVADD */ -#define LINK_REG_DEVADD_UPPHUB_Pos (11UL) /* UPPHUB (Bit 11) */ -#define LINK_REG_DEVADD_UPPHUB_Msk (0x7800UL) /* UPPHUB (Bitfield-Mask: 0x0f) */ -#define LINK_REG_DEVADD_HUBPORT_Pos (8UL) /* HUBPORT (Bit 8) */ -#define LINK_REG_DEVADD_HUBPORT_Msk (0x700UL) /* HUBPORT (Bitfield-Mask: 0x07) */ -#define LINK_REG_DEVADD_USBSPD_Pos (6UL) /* USBSPD (Bit 6) */ -#define LINK_REG_DEVADD_USBSPD_Msk (0xc0UL) /* USBSPD (Bitfield-Mask: 0x03) */ -/* USBBCCTRL0 */ -#define LINK_REG_USBBCCTRL0_PDDETSTS0_Pos (9UL) /* PDDETSTS0 (Bit 9) */ -#define LINK_REG_USBBCCTRL0_PDDETSTS0_Msk (0x200UL) /* PDDETSTS0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_CHGDETSTS0_Pos (8UL) /* CHGDETSTS0 (Bit 8) */ -#define LINK_REG_USBBCCTRL0_CHGDETSTS0_Msk (0x100UL) /* CHGDETSTS0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_BATCHGE0_Pos (7UL) /* BATCHGE0 (Bit 7) */ -#define LINK_REG_USBBCCTRL0_BATCHGE0_Msk (0x80UL) /* BATCHGE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_VDMSRCE0_Pos (5UL) /* VDMSRCE0 (Bit 5) */ -#define LINK_REG_USBBCCTRL0_VDMSRCE0_Msk (0x20UL) /* VDMSRCE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_IDPSINKE0_Pos (4UL) /* IDPSINKE0 (Bit 4) */ -#define LINK_REG_USBBCCTRL0_IDPSINKE0_Msk (0x10UL) /* IDPSINKE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_VDPSRCE0_Pos (3UL) /* VDPSRCE0 (Bit 3) */ -#define LINK_REG_USBBCCTRL0_VDPSRCE0_Msk (0x8UL) /* VDPSRCE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_IDMSINKE0_Pos (2UL) /* IDMSINKE0 (Bit 2) */ -#define LINK_REG_USBBCCTRL0_IDMSINKE0_Msk (0x4UL) /* IDMSINKE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_IDPSRCE0_Pos (1UL) /* IDPSRCE0 (Bit 1) */ -#define LINK_REG_USBBCCTRL0_IDPSRCE0_Msk (0x2UL) /* IDPSRCE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBBCCTRL0_RPDME0_Pos (0UL) /* RPDME0 (Bit 0) */ -#define LINK_REG_USBBCCTRL0_RPDME0_Msk (0x1UL) /* RPDME0 (Bitfield-Mask: 0x01) */ -/* UCKSEL */ -#define LINK_REG_UCKSEL_UCKSELC_Pos (0UL) /* UCKSELC (Bit 0) */ -#define LINK_REG_UCKSEL_UCKSELC_Msk (0x1UL) /* UCKSELC (Bitfield-Mask: 0x01) */ -/* USBMC */ -#define LINK_REG_USBMC_VDCEN_Pos (7UL) /* VDCEN (Bit 7) */ -#define LINK_REG_USBMC_VDCEN_Msk (0x80UL) /* VDCEN (Bitfield-Mask: 0x01) */ -#define LINK_REG_USBMC_VDDUSBE_Pos (0UL) /* VDDUSBE (Bit 0) */ -#define LINK_REG_USBMC_VDDUSBE_Msk (0x1UL) /* VDDUSBE (Bitfield-Mask: 0x01) */ -/* PHYSLEW */ -#define LINK_REG_PHYSLEW_SLEWF01_Pos (3UL) /* SLEWF01 (Bit 3) */ -#define LINK_REG_PHYSLEW_SLEWF01_Msk (0x8UL) /* SLEWF01 (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSLEW_SLEWF00_Pos (2UL) /* SLEWF00 (Bit 2) */ -#define LINK_REG_PHYSLEW_SLEWF00_Msk (0x4UL) /* SLEWF00 (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSLEW_SLEWR01_Pos (1UL) /* SLEWR01 (Bit 1) */ -#define LINK_REG_PHYSLEW_SLEWR01_Msk (0x2UL) /* SLEWR01 (Bitfield-Mask: 0x01) */ -#define LINK_REG_PHYSLEW_SLEWR00_Pos (0UL) /* SLEWR00 (Bit 0) */ -#define LINK_REG_PHYSLEW_SLEWR00_Msk (0x1UL) /* SLEWR00 (Bitfield-Mask: 0x01) */ -/* LPCTRL */ -#define LINK_REG_LPCTRL_HWUPM_Pos (7UL) /* HWUPM (Bit 7) */ -#define LINK_REG_LPCTRL_HWUPM_Msk (0x80UL) /* HWUPM (Bitfield-Mask: 0x01) */ -/* LPSTS */ -#define LINK_REG_LPSTS_SUSPENDM_Pos (14UL) /* SUSPENDM (Bit 14) */ -#define LINK_REG_LPSTS_SUSPENDM_Msk (0x4000UL) /* SUSPENDM (Bitfield-Mask: 0x01) */ -/* BCCTRL */ -#define LINK_REG_BCCTRL_PDDETSTS_Pos (9UL) /* PDDETSTS (Bit 9) */ -#define LINK_REG_BCCTRL_PDDETSTS_Msk (0x200UL) /* PDDETSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_CHGDETSTS_Pos (8UL) /* CHGDETSTS (Bit 8) */ -#define LINK_REG_BCCTRL_CHGDETSTS_Msk (0x100UL) /* CHGDETSTS (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_DCPMODE_Pos (5UL) /* DCPMODE (Bit 5) */ -#define LINK_REG_BCCTRL_DCPMODE_Msk (0x20UL) /* DCPMODE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_VDMSRCE_Pos (4UL) /* VDMSRCE (Bit 4) */ -#define LINK_REG_BCCTRL_VDMSRCE_Msk (0x10UL) /* VDMSRCE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_IDPSINKE_Pos (3UL) /* IDPSINKE (Bit 3) */ -#define LINK_REG_BCCTRL_IDPSINKE_Msk (0x8UL) /* IDPSINKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_VDPSRCE_Pos (2UL) /* VDPSRCE (Bit 2) */ -#define LINK_REG_BCCTRL_VDPSRCE_Msk (0x4UL) /* VDPSRCE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_IDMSINKE_Pos (1UL) /* IDMSINKE (Bit 1) */ -#define LINK_REG_BCCTRL_IDMSINKE_Msk (0x2UL) /* IDMSINKE (Bitfield-Mask: 0x01) */ -#define LINK_REG_BCCTRL_IDPSRCE_Pos (0UL) /* IDPSRCE (Bit 0) */ -#define LINK_REG_BCCTRL_IDPSRCE_Msk (0x1UL) /* IDPSRCE (Bitfield-Mask: 0x01) */ -/* PL1CTRL1 */ -#define LINK_REG_PL1CTRL1_L1EXTMD_Pos (14UL) /* L1EXTMD (Bit 14) */ -#define LINK_REG_PL1CTRL1_L1EXTMD_Msk (0x4000UL) /* L1EXTMD (Bitfield-Mask: 0x01) */ -#define LINK_REG_PL1CTRL1_HIRDTHR_Pos (8UL) /* HIRDTHR (Bit 8) */ -#define LINK_REG_PL1CTRL1_HIRDTHR_Msk (0xf00UL) /* HIRDTHR (Bitfield-Mask: 0x0f) */ -#define LINK_REG_PL1CTRL1_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ -#define LINK_REG_PL1CTRL1_DVSQ_Msk (0xf0UL) /* DVSQ (Bitfield-Mask: 0x0f) */ -#define LINK_REG_PL1CTRL1_L1NEGOMD_Pos (3UL) /* L1NEGOMD (Bit 3) */ -#define LINK_REG_PL1CTRL1_L1NEGOMD_Msk (0x8UL) /* L1NEGOMD (Bitfield-Mask: 0x01) */ -#define LINK_REG_PL1CTRL1_L1RESPMD_Pos (1UL) /* L1RESPMD (Bit 1) */ -#define LINK_REG_PL1CTRL1_L1RESPMD_Msk (0x6UL) /* L1RESPMD (Bitfield-Mask: 0x03) */ -#define LINK_REG_PL1CTRL1_L1RESPEN_Pos (0UL) /* L1RESPEN (Bit 0) */ -#define LINK_REG_PL1CTRL1_L1RESPEN_Msk (0x1UL) /* L1RESPEN (Bitfield-Mask: 0x01) */ -/* PL1CTRL2 */ -#define LINK_REG_PL1CTRL2_RWEMON_Pos (12UL) /* RWEMON (Bit 12) */ -#define LINK_REG_PL1CTRL2_RWEMON_Msk (0x1000UL) /* RWEMON (Bitfield-Mask: 0x01) */ -#define LINK_REG_PL1CTRL2_HIRDMON_Pos (8UL) /* HIRDMON (Bit 8) */ -#define LINK_REG_PL1CTRL2_HIRDMON_Msk (0xf00UL) /* HIRDMON (Bitfield-Mask: 0x0f) */ -/* HL1CTRL1 */ -#define LINK_REG_HL1CTRL1_L1STATUS_Pos (1UL) /* L1STATUS (Bit 1) */ -#define LINK_REG_HL1CTRL1_L1STATUS_Msk (0x6UL) /* L1STATUS (Bitfield-Mask: 0x03) */ -#define LINK_REG_HL1CTRL1_L1REQ_Pos (0UL) /* L1REQ (Bit 0) */ -#define LINK_REG_HL1CTRL1_L1REQ_Msk (0x1UL) /* L1REQ (Bitfield-Mask: 0x01) */ -/* HL1CTRL2 */ -#define LINK_REG_HL1CTRL2_BESL_Pos (15UL) /* BESL (Bit 15) */ -#define LINK_REG_HL1CTRL2_BESL_Msk (0x8000UL) /* BESL (Bitfield-Mask: 0x01) */ -#define LINK_REG_HL1CTRL2_L1RWE_Pos (12UL) /* L1RWE (Bit 12) */ -#define LINK_REG_HL1CTRL2_L1RWE_Msk (0x1000UL) /* L1RWE (Bitfield-Mask: 0x01) */ -#define LINK_REG_HL1CTRL2_HIRD_Pos (8UL) /* HIRD (Bit 8) */ -#define LINK_REG_HL1CTRL2_HIRD_Msk (0xf00UL) /* HIRD (Bitfield-Mask: 0x0f) */ -#define LINK_REG_HL1CTRL2_L1ADDR_Pos (0UL) /* L1ADDR (Bit 0) */ -#define LINK_REG_HL1CTRL2_L1ADDR_Msk (0xfUL) /* L1ADDR (Bitfield-Mask: 0x0f) */ -/* DPUSR0R */ -#define LINK_REG_DPUSR0R_DVBSTSHM_Pos (23UL) /* DVBSTSHM (Bit 23) */ -#define LINK_REG_DPUSR0R_DVBSTSHM_Msk (0x800000UL) /* DVBSTSHM (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_DOVCBHM_Pos (21UL) /* DOVCBHM (Bit 21) */ -#define LINK_REG_DPUSR0R_DOVCBHM_Msk (0x200000UL) /* DOVCBHM (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_DOVCAHM_Pos (20UL) /* DOVCAHM (Bit 20) */ -#define LINK_REG_DPUSR0R_DOVCAHM_Msk (0x100000UL) /* DOVCAHM (Bitfield-Mask: 0x01) */ -/* DPUSR1R */ -#define LINK_REG_DPUSR1R_DVBSTSH_Pos (23UL) /* DVBSTSH (Bit 23) */ -#define LINK_REG_DPUSR1R_DVBSTSH_Msk (0x800000UL) /* DVBSTSH (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCBH_Pos (21UL) /* DOVCBH (Bit 21) */ -#define LINK_REG_DPUSR1R_DOVCBH_Msk (0x200000UL) /* DOVCBH (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCAH_Pos (20UL) /* DOVCAH (Bit 20) */ -#define LINK_REG_DPUSR1R_DOVCAH_Msk (0x100000UL) /* DOVCAH (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DVBSTSHE_Pos (7UL) /* DVBSTSHE (Bit 7) */ -#define LINK_REG_DPUSR1R_DVBSTSHE_Msk (0x80UL) /* DVBSTSHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCBHE_Pos (5UL) /* DOVCBHE (Bit 5) */ -#define LINK_REG_DPUSR1R_DOVCBHE_Msk (0x20UL) /* DOVCBHE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_DOVCAHE_Pos (4UL) /* DOVCAHE (Bit 4) */ -#define LINK_REG_DPUSR1R_DOVCAHE_Msk (0x10UL) /* DOVCAHE (Bitfield-Mask: 0x01) */ -/* DPUSR2R */ -#define LINK_REG_DPUSR2R_DMINTE_Pos (9UL) /* DMINTE (Bit 9) */ -#define LINK_REG_DPUSR2R_DMINTE_Msk (0x200UL) /* DMINTE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DPINTE_Pos (8UL) /* DPINTE (Bit 8) */ -#define LINK_REG_DPUSR2R_DPINTE_Msk (0x100UL) /* DPINTE (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DMVAL_Pos (5UL) /* DMVAL (Bit 5) */ -#define LINK_REG_DPUSR2R_DMVAL_Msk (0x20UL) /* DMVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DPVAL_Pos (4UL) /* DPVAL (Bit 4) */ -#define LINK_REG_DPUSR2R_DPVAL_Msk (0x10UL) /* DPVAL (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DMINT_Pos (1UL) /* DMINT (Bit 1) */ -#define LINK_REG_DPUSR2R_DMINT_Msk (0x2UL) /* DMINT (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR2R_DPINT_Pos (0UL) /* DPINT (Bit 0) */ -#define LINK_REG_DPUSR2R_DPINT_Msk (0x1UL) /* DPINT (Bitfield-Mask: 0x01) */ -/* DPUSRCR */ -#define LINK_REG_DPUSRCR_FIXPHYPD_Pos (1UL) /* FIXPHYPD (Bit 1) */ -#define LINK_REG_DPUSRCR_FIXPHYPD_Msk (0x2UL) /* FIXPHYPD (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSRCR_FIXPHY_Pos (0UL) /* FIXPHY (Bit 0) */ -#define LINK_REG_DPUSRCR_FIXPHY_Msk (0x1UL) /* FIXPHY (Bitfield-Mask: 0x01) */ -/* DPUSR0R_FS */ -#define LINK_REG_DPUSR0R_FS_DVBSTS0_Pos (23UL) /* DVBSTS0 (Bit 23) */ -#define LINK_REG_DPUSR0R_FS_DVBSTS0_Msk (0x800000UL) /* DVBSTS0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DOVCB0_Pos (21UL) /* DOVCB0 (Bit 21) */ -#define LINK_REG_DPUSR0R_FS_DOVCB0_Msk (0x200000UL) /* DOVCB0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DOVCA0_Pos (20UL) /* DOVCA0 (Bit 20) */ -#define LINK_REG_DPUSR0R_FS_DOVCA0_Msk (0x100000UL) /* DOVCA0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DM0_Pos (17UL) /* DM0 (Bit 17) */ -#define LINK_REG_DPUSR0R_FS_DM0_Msk (0x20000UL) /* DM0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DP0_Pos (16UL) /* DP0 (Bit 16) */ -#define LINK_REG_DPUSR0R_FS_DP0_Msk (0x10000UL) /* DP0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_FIXPHY0_Pos (4UL) /* FIXPHY0 (Bit 4) */ -#define LINK_REG_DPUSR0R_FS_FIXPHY0_Msk (0x10UL) /* FIXPHY0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_DRPD0_Pos (3UL) /* DRPD0 (Bit 3) */ -#define LINK_REG_DPUSR0R_FS_DRPD0_Msk (0x8UL) /* DRPD0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_RPUE0_Pos (1UL) /* RPUE0 (Bit 1) */ -#define LINK_REG_DPUSR0R_FS_RPUE0_Msk (0x2UL) /* RPUE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR0R_FS_SRPC0_Pos (0UL) /* SRPC0 (Bit 0) */ -#define LINK_REG_DPUSR0R_FS_SRPC0_Msk (0x1UL) /* SRPC0 (Bitfield-Mask: 0x01) */ -/* DPUSR1R_FS */ -#define LINK_REG_DPUSR1R_FS_DVBINT0_Pos (23UL) /* DVBINT0 (Bit 23) */ -#define LINK_REG_DPUSR1R_FS_DVBINT0_Msk (0x800000UL) /* DVBINT0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRB0_Pos (21UL) /* DOVRCRB0 (Bit 21) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRB0_Msk (0x200000UL) /* DOVRCRB0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRA0_Pos (20UL) /* DOVRCRA0 (Bit 20) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRA0_Msk (0x100000UL) /* DOVRCRA0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DMINT0_Pos (17UL) /* DMINT0 (Bit 17) */ -#define LINK_REG_DPUSR1R_FS_DMINT0_Msk (0x20000UL) /* DMINT0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DPINT0_Pos (16UL) /* DPINT0 (Bit 16) */ -#define LINK_REG_DPUSR1R_FS_DPINT0_Msk (0x10000UL) /* DPINT0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DVBSE0_Pos (7UL) /* DVBSE0 (Bit 7) */ -#define LINK_REG_DPUSR1R_FS_DVBSE0_Msk (0x80UL) /* DVBSE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRBE0_Pos (5UL) /* DOVRCRBE0 (Bit 5) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRBE0_Msk (0x20UL) /* DOVRCRBE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRAE0_Pos (4UL) /* DOVRCRAE0 (Bit 4) */ -#define LINK_REG_DPUSR1R_FS_DOVRCRAE0_Msk (0x10UL) /* DOVRCRAE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DMINTE0_Pos (1UL) /* DMINTE0 (Bit 1) */ -#define LINK_REG_DPUSR1R_FS_DMINTE0_Msk (0x2UL) /* DMINTE0 (Bitfield-Mask: 0x01) */ -#define LINK_REG_DPUSR1R_FS_DPINTE0_Pos (0UL) /* DPINTE0 (Bit 0) */ -#define LINK_REG_DPUSR1R_FS_DPINTE0_Msk (0x1UL) /* DPINTE0 (Bitfield-Mask: 0x01) */ +// PIPE_TR +// E +#define LINK_REG_PIPE_TR_E_TRENB_Pos (9UL) /* TRENB (Bit 9) */ +#define LINK_REG_PIPE_TR_E_TRENB_Msk (0x200UL) /* TRENB (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_TR_E_TRCLR_Pos (8UL) /* TRCLR (Bit 8) */ +#define LINK_REG_PIPE_TR_E_TRCLR_Msk (0x100UL) /* TRCLR (Bitfield-Mask: 0x01) */ + +// N +#define LINK_REG_PIPE_TR_N_TRNCNT_Pos (0UL) /* TRNCNT (Bit 0) */ +#define LINK_REG_PIPE_TR_N_TRNCNT_Msk (0xffffUL) /* TRNCNT (Bitfield-Mask: 0xffff) */ + +// LINK_REG + +// SYSCFG +#define LINK_REG_SYSCFG_SCKE_Pos (10UL) /* SCKE (Bit 10) */ +#define LINK_REG_SYSCFG_SCKE_Msk (0x400UL) /* SCKE (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSCFG_CNEN_Pos (8UL) /* CNEN (Bit 8) */ +#define LINK_REG_SYSCFG_CNEN_Msk (0x100UL) /* CNEN (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSCFG_DCFM_Pos (6UL) /* DCFM (Bit 6) */ +#define LINK_REG_SYSCFG_DCFM_Msk (0x40UL) /* DCFM (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSCFG_DRPD_Pos (5UL) /* DRPD (Bit 5) */ +#define LINK_REG_SYSCFG_DRPD_Msk (0x20UL) /* DRPD (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSCFG_DPRPU_Pos (4UL) /* DPRPU (Bit 4) */ +#define LINK_REG_SYSCFG_DPRPU_Msk (0x10UL) /* DPRPU (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSCFG_DMRPU_Pos (3UL) /* DMRPU (Bit 3) */ +#define LINK_REG_SYSCFG_DMRPU_Msk (0x8UL) /* DMRPU (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSCFG_USBE_Pos (0UL) /* USBE (Bit 0) */ +#define LINK_REG_SYSCFG_USBE_Msk (0x1UL) /* USBE (Bitfield-Mask: 0x01) */ + +// BUSWAIT +#define LINK_REG_BUSWAIT_BWAIT_Pos (0UL) /* BWAIT (Bit 0) */ +#define LINK_REG_BUSWAIT_BWAIT_Msk (0xfUL) /* BWAIT (Bitfield-Mask: 0x0f) */ + +// SYSSTS0 +#define LINK_REG_SYSSTS0_OVCMON_Pos (14UL) /* OVCMON (Bit 14) */ +#define LINK_REG_SYSSTS0_OVCMON_Msk (0xc000UL) /* OVCMON (Bitfield-Mask: 0x03) */ +#define LINK_REG_SYSSTS0_HTACT_Pos (6UL) /* HTACT (Bit 6) */ +#define LINK_REG_SYSSTS0_HTACT_Msk (0x40UL) /* HTACT (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSSTS0_SOFEA_Pos (5UL) /* SOFEA (Bit 5) */ +#define LINK_REG_SYSSTS0_SOFEA_Msk (0x20UL) /* SOFEA (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSSTS0_IDMON_Pos (2UL) /* IDMON (Bit 2) */ +#define LINK_REG_SYSSTS0_IDMON_Msk (0x4UL) /* IDMON (Bitfield-Mask: 0x01) */ +#define LINK_REG_SYSSTS0_LNST_Pos (0UL) /* LNST (Bit 0) */ +#define LINK_REG_SYSSTS0_LNST_Msk (0x3UL) /* LNST (Bitfield-Mask: 0x03) */ + +// PLLSTA +#define LINK_REG_PLLSTA_PLLLOCK_Pos (0UL) /* PLLLOCK (Bit 0) */ +#define LINK_REG_PLLSTA_PLLLOCK_Msk (0x1UL) /* PLLLOCK (Bitfield-Mask: 0x01) */ + +// DVSTCTR0 +#define LINK_REG_DVSTCTR0_HNPBTOA_Pos (11UL) /* HNPBTOA (Bit 11) */ +#define LINK_REG_DVSTCTR0_HNPBTOA_Msk (0x800UL) /* HNPBTOA (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_EXICEN_Pos (10UL) /* EXICEN (Bit 10) */ +#define LINK_REG_DVSTCTR0_EXICEN_Msk (0x400UL) /* EXICEN (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_VBUSEN_Pos (9UL) /* VBUSEN (Bit 9) */ +#define LINK_REG_DVSTCTR0_VBUSEN_Msk (0x200UL) /* VBUSEN (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_WKUP_Pos (8UL) /* WKUP (Bit 8) */ +#define LINK_REG_DVSTCTR0_WKUP_Msk (0x100UL) /* WKUP (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_RWUPE_Pos (7UL) /* RWUPE (Bit 7) */ +#define LINK_REG_DVSTCTR0_RWUPE_Msk (0x80UL) /* RWUPE (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_USBRST_Pos (6UL) /* USBRST (Bit 6) */ +#define LINK_REG_DVSTCTR0_USBRST_Msk (0x40UL) /* USBRST (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_RESUME_Pos (5UL) /* RESUME (Bit 5) */ +#define LINK_REG_DVSTCTR0_RESUME_Msk (0x20UL) /* RESUME (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_UACT_Pos (4UL) /* UACT (Bit 4) */ +#define LINK_REG_DVSTCTR0_UACT_Msk (0x10UL) /* UACT (Bitfield-Mask: 0x01) */ +#define LINK_REG_DVSTCTR0_RHST_Pos (0UL) /* RHST (Bit 0) */ +#define LINK_REG_DVSTCTR0_RHST_Msk (0x7UL) /* RHST (Bitfield-Mask: 0x07) */ + +// TESTMODE +#define LINK_REG_TESTMODE_UTST_Pos (0UL) /* UTST (Bit 0) */ +#define LINK_REG_TESTMODE_UTST_Msk (0xfUL) /* UTST (Bitfield-Mask: 0x0f) */ + +// CFIFOSEL +#define LINK_REG_CFIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ +#define LINK_REG_CFIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ +#define LINK_REG_CFIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ +#define LINK_REG_CFIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ +#define LINK_REG_CFIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ +#define LINK_REG_CFIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ +#define LINK_REG_CFIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ +#define LINK_REG_CFIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ +#define LINK_REG_CFIFOSEL_ISEL_Pos (5UL) /* ISEL (Bit 5) */ +#define LINK_REG_CFIFOSEL_ISEL_Msk (0x20UL) /* ISEL (Bitfield-Mask: 0x01) */ +#define LINK_REG_CFIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ +#define LINK_REG_CFIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ + +// CFIFOCTR +#define LINK_REG_CFIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ +#define LINK_REG_CFIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ +#define LINK_REG_CFIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ +#define LINK_REG_CFIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ +#define LINK_REG_CFIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ +#define LINK_REG_CFIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ +#define LINK_REG_CFIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ +#define LINK_REG_CFIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ + +// D0FIFOSEL +#define LINK_REG_D0FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ +#define LINK_REG_D0FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ +#define LINK_REG_D0FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ +#define LINK_REG_D0FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ +#define LINK_REG_D0FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ +#define LINK_REG_D0FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ +#define LINK_REG_D0FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ +#define LINK_REG_D0FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ +#define LINK_REG_D0FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ + +// D0FIFOCTR +#define LINK_REG_D0FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ +#define LINK_REG_D0FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ +#define LINK_REG_D0FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ +#define LINK_REG_D0FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ +#define LINK_REG_D0FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ +#define LINK_REG_D0FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ + +// D1FIFOSEL +#define LINK_REG_D1FIFOSEL_RCNT_Pos (15UL) /* RCNT (Bit 15) */ +#define LINK_REG_D1FIFOSEL_RCNT_Msk (0x8000UL) /* RCNT (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOSEL_REW_Pos (14UL) /* REW (Bit 14) */ +#define LINK_REG_D1FIFOSEL_REW_Msk (0x4000UL) /* REW (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOSEL_DCLRM_Pos (13UL) /* DCLRM (Bit 13) */ +#define LINK_REG_D1FIFOSEL_DCLRM_Msk (0x2000UL) /* DCLRM (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOSEL_DREQE_Pos (12UL) /* DREQE (Bit 12) */ +#define LINK_REG_D1FIFOSEL_DREQE_Msk (0x1000UL) /* DREQE (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOSEL_MBW_Pos (10UL) /* MBW (Bit 10) */ +#define LINK_REG_D1FIFOSEL_MBW_Msk (0xc00UL) /* MBW (Bitfield-Mask: 0x03) */ +#define LINK_REG_D1FIFOSEL_BIGEND_Pos (8UL) /* BIGEND (Bit 8) */ +#define LINK_REG_D1FIFOSEL_BIGEND_Msk (0x100UL) /* BIGEND (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOSEL_CURPIPE_Pos (0UL) /* CURPIPE (Bit 0) */ +#define LINK_REG_D1FIFOSEL_CURPIPE_Msk (0xfUL) /* CURPIPE (Bitfield-Mask: 0x0f) */ + +// D1FIFOCTR +#define LINK_REG_D1FIFOCTR_BVAL_Pos (15UL) /* BVAL (Bit 15) */ +#define LINK_REG_D1FIFOCTR_BVAL_Msk (0x8000UL) /* BVAL (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOCTR_BCLR_Pos (14UL) /* BCLR (Bit 14) */ +#define LINK_REG_D1FIFOCTR_BCLR_Msk (0x4000UL) /* BCLR (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOCTR_FRDY_Pos (13UL) /* FRDY (Bit 13) */ +#define LINK_REG_D1FIFOCTR_FRDY_Msk (0x2000UL) /* FRDY (Bitfield-Mask: 0x01) */ +#define LINK_REG_D1FIFOCTR_DTLN_Pos (0UL) /* DTLN (Bit 0) */ +#define LINK_REG_D1FIFOCTR_DTLN_Msk (0xfffUL) /* DTLN (Bitfield-Mask: 0xfff) */ + +// INTENB0 +#define LINK_REG_INTENB0_VBSE_Pos (15UL) /* VBSE (Bit 15) */ +#define LINK_REG_INTENB0_VBSE_Msk (0x8000UL) /* VBSE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB0_RSME_Pos (14UL) /* RSME (Bit 14) */ +#define LINK_REG_INTENB0_RSME_Msk (0x4000UL) /* RSME (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB0_SOFE_Pos (13UL) /* SOFE (Bit 13) */ +#define LINK_REG_INTENB0_SOFE_Msk (0x2000UL) /* SOFE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB0_DVSE_Pos (12UL) /* DVSE (Bit 12) */ +#define LINK_REG_INTENB0_DVSE_Msk (0x1000UL) /* DVSE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB0_CTRE_Pos (11UL) /* CTRE (Bit 11) */ +#define LINK_REG_INTENB0_CTRE_Msk (0x800UL) /* CTRE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB0_BEMPE_Pos (10UL) /* BEMPE (Bit 10) */ +#define LINK_REG_INTENB0_BEMPE_Msk (0x400UL) /* BEMPE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB0_NRDYE_Pos (9UL) /* NRDYE (Bit 9) */ +#define LINK_REG_INTENB0_NRDYE_Msk (0x200UL) /* NRDYE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB0_BRDYE_Pos (8UL) /* BRDYE (Bit 8) */ +#define LINK_REG_INTENB0_BRDYE_Msk (0x100UL) /* BRDYE (Bitfield-Mask: 0x01) */ + +// INTENB1 +#define LINK_REG_INTENB1_OVRCRE_Pos (15UL) /* OVRCRE (Bit 15) */ +#define LINK_REG_INTENB1_OVRCRE_Msk (0x8000UL) /* OVRCRE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB1_BCHGE_Pos (14UL) /* BCHGE (Bit 14) */ +#define LINK_REG_INTENB1_BCHGE_Msk (0x4000UL) /* BCHGE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB1_DTCHE_Pos (12UL) /* DTCHE (Bit 12) */ +#define LINK_REG_INTENB1_DTCHE_Msk (0x1000UL) /* DTCHE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB1_ATTCHE_Pos (11UL) /* ATTCHE (Bit 11) */ +#define LINK_REG_INTENB1_ATTCHE_Msk (0x800UL) /* ATTCHE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB1_EOFERRE_Pos (6UL) /* EOFERRE (Bit 6) */ +#define LINK_REG_INTENB1_EOFERRE_Msk (0x40UL) /* EOFERRE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB1_SIGNE_Pos (5UL) /* SIGNE (Bit 5) */ +#define LINK_REG_INTENB1_SIGNE_Msk (0x20UL) /* SIGNE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB1_SACKE_Pos (4UL) /* SACKE (Bit 4) */ +#define LINK_REG_INTENB1_SACKE_Msk (0x10UL) /* SACKE (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTENB1_PDDETINTE0_Pos (0UL) /* PDDETINTE0 (Bit 0) */ +#define LINK_REG_INTENB1_PDDETINTE0_Msk (0x1UL) /* PDDETINTE0 (Bitfield-Mask: 0x01) */ + +// BRDYENB +#define LINK_REG_BRDYENB_PIPEBRDYE_Pos (0UL) /* PIPEBRDYE (Bit 0) */ +#define LINK_REG_BRDYENB_PIPEBRDYE_Msk (0x1UL) /* PIPEBRDYE (Bitfield-Mask: 0x01) */ + +// NRDYENB +#define LINK_REG_NRDYENB_PIPENRDYE_Pos (0UL) /* PIPENRDYE (Bit 0) */ +#define LINK_REG_NRDYENB_PIPENRDYE_Msk (0x1UL) /* PIPENRDYE (Bitfield-Mask: 0x01) */ + +// BEMPENB +#define LINK_REG_BEMPENB_PIPEBEMPE_Pos (0UL) /* PIPEBEMPE (Bit 0) */ +#define LINK_REG_BEMPENB_PIPEBEMPE_Msk (0x1UL) /* PIPEBEMPE (Bitfield-Mask: 0x01) */ + +// SOFCFG +#define LINK_REG_SOFCFG_TRNENSEL_Pos (8UL) /* TRNENSEL (Bit 8) */ +#define LINK_REG_SOFCFG_TRNENSEL_Msk (0x100UL) /* TRNENSEL (Bitfield-Mask: 0x01) */ +#define LINK_REG_SOFCFG_BRDYM_Pos (6UL) /* BRDYM (Bit 6) */ +#define LINK_REG_SOFCFG_BRDYM_Msk (0x40UL) /* BRDYM (Bitfield-Mask: 0x01) */ +#define LINK_REG_SOFCFG_INTL_Pos (5UL) /* INTL (Bit 5) */ +#define LINK_REG_SOFCFG_INTL_Msk (0x20UL) /* INTL (Bitfield-Mask: 0x01) */ +#define LINK_REG_SOFCFG_EDGESTS_Pos (4UL) /* EDGESTS (Bit 4) */ +#define LINK_REG_SOFCFG_EDGESTS_Msk (0x10UL) /* EDGESTS (Bitfield-Mask: 0x01) */ + +// PHYSET +#define LINK_REG_PHYSET_HSEB_Pos (15UL) /* HSEB (Bit 15) */ +#define LINK_REG_PHYSET_HSEB_Msk (0x8000UL) /* HSEB (Bitfield-Mask: 0x01) */ +#define LINK_REG_PHYSET_REPSTART_Pos (11UL) /* REPSTART (Bit 11) */ +#define LINK_REG_PHYSET_REPSTART_Msk (0x800UL) /* REPSTART (Bitfield-Mask: 0x01) */ +#define LINK_REG_PHYSET_REPSEL_Pos (8UL) /* REPSEL (Bit 8) */ +#define LINK_REG_PHYSET_REPSEL_Msk (0x300UL) /* REPSEL (Bitfield-Mask: 0x03) */ +#define LINK_REG_PHYSET_CLKSEL_Pos (4UL) /* CLKSEL (Bit 4) */ +#define LINK_REG_PHYSET_CLKSEL_Msk (0x30UL) /* CLKSEL (Bitfield-Mask: 0x03) */ +#define LINK_REG_PHYSET_CDPEN_Pos (3UL) /* CDPEN (Bit 3) */ +#define LINK_REG_PHYSET_CDPEN_Msk (0x8UL) /* CDPEN (Bitfield-Mask: 0x01) */ +#define LINK_REG_PHYSET_PLLRESET_Pos (1UL) /* PLLRESET (Bit 1) */ +#define LINK_REG_PHYSET_PLLRESET_Msk (0x2UL) /* PLLRESET (Bitfield-Mask: 0x01) */ +#define LINK_REG_PHYSET_DIRPD_Pos (0UL) /* DIRPD (Bit 0) */ +#define LINK_REG_PHYSET_DIRPD_Msk (0x1UL) /* DIRPD (Bitfield-Mask: 0x01) */ + +// INTSTS0 +#define LINK_REG_INTSTS0_VBINT_Pos (15UL) /* VBINT (Bit 15) */ +#define LINK_REG_INTSTS0_VBINT_Msk (0x8000UL) /* VBINT (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_RESM_Pos (14UL) /* RESM (Bit 14) */ +#define LINK_REG_INTSTS0_RESM_Msk (0x4000UL) /* RESM (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_SOFR_Pos (13UL) /* SOFR (Bit 13) */ +#define LINK_REG_INTSTS0_SOFR_Msk (0x2000UL) /* SOFR (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_DVST_Pos (12UL) /* DVST (Bit 12) */ +#define LINK_REG_INTSTS0_DVST_Msk (0x1000UL) /* DVST (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_CTRT_Pos (11UL) /* CTRT (Bit 11) */ +#define LINK_REG_INTSTS0_CTRT_Msk (0x800UL) /* CTRT (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_BEMP_Pos (10UL) /* BEMP (Bit 10) */ +#define LINK_REG_INTSTS0_BEMP_Msk (0x400UL) /* BEMP (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_NRDY_Pos (9UL) /* NRDY (Bit 9) */ +#define LINK_REG_INTSTS0_NRDY_Msk (0x200UL) /* NRDY (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_BRDY_Pos (8UL) /* BRDY (Bit 8) */ +#define LINK_REG_INTSTS0_BRDY_Msk (0x100UL) /* BRDY (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_VBSTS_Pos (7UL) /* VBSTS (Bit 7) */ +#define LINK_REG_INTSTS0_VBSTS_Msk (0x80UL) /* VBSTS (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ +#define LINK_REG_INTSTS0_DVSQ_Msk (0x70UL) /* DVSQ (Bitfield-Mask: 0x07) */ +#define LINK_REG_INTSTS0_VALID_Pos (3UL) /* VALID (Bit 3) */ +#define LINK_REG_INTSTS0_VALID_Msk (0x8UL) /* VALID (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS0_CTSQ_Pos (0UL) /* CTSQ (Bit 0) */ +#define LINK_REG_INTSTS0_CTSQ_Msk (0x7UL) /* CTSQ (Bitfield-Mask: 0x07) */ + +// INTSTS1 +#define LINK_REG_INTSTS1_OVRCR_Pos (15UL) /* OVRCR (Bit 15) */ +#define LINK_REG_INTSTS1_OVRCR_Msk (0x8000UL) /* OVRCR (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_BCHG_Pos (14UL) /* BCHG (Bit 14) */ +#define LINK_REG_INTSTS1_BCHG_Msk (0x4000UL) /* BCHG (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_DTCH_Pos (12UL) /* DTCH (Bit 12) */ +#define LINK_REG_INTSTS1_DTCH_Msk (0x1000UL) /* DTCH (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_ATTCH_Pos (11UL) /* ATTCH (Bit 11) */ +#define LINK_REG_INTSTS1_ATTCH_Msk (0x800UL) /* ATTCH (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_L1RSMEND_Pos (9UL) /* L1RSMEND (Bit 9) */ +#define LINK_REG_INTSTS1_L1RSMEND_Msk (0x200UL) /* L1RSMEND (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_LPMEND_Pos (8UL) /* LPMEND (Bit 8) */ +#define LINK_REG_INTSTS1_LPMEND_Msk (0x100UL) /* LPMEND (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_EOFERR_Pos (6UL) /* EOFERR (Bit 6) */ +#define LINK_REG_INTSTS1_EOFERR_Msk (0x40UL) /* EOFERR (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_SIGN_Pos (5UL) /* SIGN (Bit 5) */ +#define LINK_REG_INTSTS1_SIGN_Msk (0x20UL) /* SIGN (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_SACK_Pos (4UL) /* SACK (Bit 4) */ +#define LINK_REG_INTSTS1_SACK_Msk (0x10UL) /* SACK (Bitfield-Mask: 0x01) */ +#define LINK_REG_INTSTS1_PDDETINT0_Pos (0UL) /* PDDETINT0 (Bit 0) */ +#define LINK_REG_INTSTS1_PDDETINT0_Msk (0x1UL) /* PDDETINT0 (Bitfield-Mask: 0x01) */ + +// BRDYSTS +#define LINK_REG_BRDYSTS_PIPEBRDY_Pos (0UL) /* PIPEBRDY (Bit 0) */ +#define LINK_REG_BRDYSTS_PIPEBRDY_Msk (0x1UL) /* PIPEBRDY (Bitfield-Mask: 0x01) */ + +// NRDYSTS +#define LINK_REG_NRDYSTS_PIPENRDY_Pos (0UL) /* PIPENRDY (Bit 0) */ +#define LINK_REG_NRDYSTS_PIPENRDY_Msk (0x1UL) /* PIPENRDY (Bitfield-Mask: 0x01) */ + +// BEMPSTS +#define LINK_REG_BEMPSTS_PIPEBEMP_Pos (0UL) /* PIPEBEMP (Bit 0) */ +#define LINK_REG_BEMPSTS_PIPEBEMP_Msk (0x1UL) /* PIPEBEMP (Bitfield-Mask: 0x01) */ + +// FRMNUM +#define LINK_REG_FRMNUM_OVRN_Pos (15UL) /* OVRN (Bit 15) */ +#define LINK_REG_FRMNUM_OVRN_Msk (0x8000UL) /* OVRN (Bitfield-Mask: 0x01) */ +#define LINK_REG_FRMNUM_CRCE_Pos (14UL) /* CRCE (Bit 14) */ +#define LINK_REG_FRMNUM_CRCE_Msk (0x4000UL) /* CRCE (Bitfield-Mask: 0x01) */ +#define LINK_REG_FRMNUM_FRNM_Pos (0UL) /* FRNM (Bit 0) */ +#define LINK_REG_FRMNUM_FRNM_Msk (0x7ffUL) /* FRNM (Bitfield-Mask: 0x7ff) */ + +// UFRMNUM +#define LINK_REG_UFRMNUM_DVCHG_Pos (15UL) /* DVCHG (Bit 15) */ +#define LINK_REG_UFRMNUM_DVCHG_Msk (0x8000UL) /* DVCHG (Bitfield-Mask: 0x01) */ +#define LINK_REG_UFRMNUM_UFRNM_Pos (0UL) /* UFRNM (Bit 0) */ +#define LINK_REG_UFRMNUM_UFRNM_Msk (0x7UL) /* UFRNM (Bitfield-Mask: 0x07) */ + +// USBADDR +#define LINK_REG_USBADDR_STSRECOV0_Pos (8UL) /* STSRECOV0 (Bit 8) */ +#define LINK_REG_USBADDR_STSRECOV0_Msk (0x700UL) /* STSRECOV0 (Bitfield-Mask: 0x07) */ +#define LINK_REG_USBADDR_USBADDR_Pos (0UL) /* USBADDR (Bit 0) */ +#define LINK_REG_USBADDR_USBADDR_Msk (0x7fUL) /* USBADDR (Bitfield-Mask: 0x7f) */ + +// USBREQ +#define LINK_REG_USBREQ_BREQUEST_Pos (8UL) /* BREQUEST (Bit 8) */ +#define LINK_REG_USBREQ_BREQUEST_Msk (0xff00UL) /* BREQUEST (Bitfield-Mask: 0xff) */ +#define LINK_REG_USBREQ_BMREQUESTTYPE_Pos (0UL) /* BMREQUESTTYPE (Bit 0) */ +#define LINK_REG_USBREQ_BMREQUESTTYPE_Msk (0xffUL) /* BMREQUESTTYPE (Bitfield-Mask: 0xff) */ + +// USBVAL +#define LINK_REG_USBVAL_WVALUE_Pos (0UL) /* WVALUE (Bit 0) */ +#define LINK_REG_USBVAL_WVALUE_Msk (0xffffUL) /* WVALUE (Bitfield-Mask: 0xffff) */ + +// USBINDX +#define LINK_REG_USBINDX_WINDEX_Pos (0UL) /* WINDEX (Bit 0) */ +#define LINK_REG_USBINDX_WINDEX_Msk (0xffffUL) /* WINDEX (Bitfield-Mask: 0xffff) */ + +// USBLENG +#define LINK_REG_USBLENG_WLENGTH_Pos (0UL) /* WLENGTH (Bit 0) */ +#define LINK_REG_USBLENG_WLENGTH_Msk (0xffffUL) /* WLENGTH (Bitfield-Mask: 0xffff) */ + +// DCPCFG +#define LINK_REG_DCPCFG_CNTMD_Pos (8UL) /* CNTMD (Bit 8) */ +#define LINK_REG_DCPCFG_CNTMD_Msk (0x100UL) /* CNTMD (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ +#define LINK_REG_DCPCFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCFG_DIR_Pos (4UL) /* DIR (Bit 4) */ +#define LINK_REG_DCPCFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ + +// DCPMAXP +#define LINK_REG_DCPMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ +#define LINK_REG_DCPMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ +#define LINK_REG_DCPMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ +#define LINK_REG_DCPMAXP_MXPS_Msk (0x7fUL) /* MXPS (Bitfield-Mask: 0x7f) */ + +// DCPCTR +#define LINK_REG_DCPCTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ +#define LINK_REG_DCPCTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_SUREQ_Pos (14UL) /* SUREQ (Bit 14) */ +#define LINK_REG_DCPCTR_SUREQ_Msk (0x4000UL) /* SUREQ (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_SUREQCLR_Pos (11UL) /* SUREQCLR (Bit 11) */ +#define LINK_REG_DCPCTR_SUREQCLR_Msk (0x800UL) /* SUREQCLR (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ +#define LINK_REG_DCPCTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ +#define LINK_REG_DCPCTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ +#define LINK_REG_DCPCTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ +#define LINK_REG_DCPCTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_CCPL_Pos (2UL) /* CCPL (Bit 2) */ +#define LINK_REG_DCPCTR_CCPL_Msk (0x4UL) /* CCPL (Bitfield-Mask: 0x01) */ +#define LINK_REG_DCPCTR_PID_Pos (0UL) /* PID (Bit 0) */ +#define LINK_REG_DCPCTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ + +// PIPESEL +#define LINK_REG_PIPESEL_PIPESEL_Pos (0UL) /* PIPESEL (Bit 0) */ +#define LINK_REG_PIPESEL_PIPESEL_Msk (0xfUL) /* PIPESEL (Bitfield-Mask: 0x0f) */ + +// PIPECFG +#define LINK_REG_PIPECFG_TYPE_Pos (14UL) /* TYPE (Bit 14) */ +#define LINK_REG_PIPECFG_TYPE_Msk (0xc000UL) /* TYPE (Bitfield-Mask: 0x03) */ +#define LINK_REG_PIPECFG_BFRE_Pos (10UL) /* BFRE (Bit 10) */ +#define LINK_REG_PIPECFG_BFRE_Msk (0x400UL) /* BFRE (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPECFG_DBLB_Pos (9UL) /* DBLB (Bit 9) */ +#define LINK_REG_PIPECFG_DBLB_Msk (0x200UL) /* DBLB (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPECFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ +#define LINK_REG_PIPECFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPECFG_DIR_Pos (4UL) /* DIR (Bit 4) */ +#define LINK_REG_PIPECFG_DIR_Msk (0x10UL) /* DIR (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPECFG_EPNUM_Pos (0UL) /* EPNUM (Bit 0) */ +#define LINK_REG_PIPECFG_EPNUM_Msk (0xfUL) /* EPNUM (Bitfield-Mask: 0x0f) */ + +// PIPEMAXP +#define LINK_REG_PIPEMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ +#define LINK_REG_PIPEMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ +#define LINK_REG_PIPEMAXP_MXPS_Pos (0UL) /* MXPS (Bit 0) */ +#define LINK_REG_PIPEMAXP_MXPS_Msk (0x1ffUL) /* MXPS (Bitfield-Mask: 0x1ff) */ + +// PIPEPERI +#define LINK_REG_PIPEPERI_IFIS_Pos (12UL) /* IFIS (Bit 12) */ +#define LINK_REG_PIPEPERI_IFIS_Msk (0x1000UL) /* IFIS (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPEPERI_IITV_Pos (0UL) /* IITV (Bit 0) */ +#define LINK_REG_PIPEPERI_IITV_Msk (0x7UL) /* IITV (Bitfield-Mask: 0x07) */ + +// PIPE_CTR +#define LINK_REG_PIPE_CTR_BSTS_Pos (15UL) /* BSTS (Bit 15) */ +#define LINK_REG_PIPE_CTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_INBUFM_Pos (14UL) /* INBUFM (Bit 14) */ +#define LINK_REG_PIPE_CTR_INBUFM_Msk (0x4000UL) /* INBUFM (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_CSCLR_Pos (13UL) /* CSCLR (Bit 13) */ +#define LINK_REG_PIPE_CTR_CSCLR_Msk (0x2000UL) /* CSCLR (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_CSSTS_Pos (12UL) /* CSSTS (Bit 12) */ +#define LINK_REG_PIPE_CTR_CSSTS_Msk (0x1000UL) /* CSSTS (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_ATREPM_Pos (10UL) /* ATREPM (Bit 10) */ +#define LINK_REG_PIPE_CTR_ATREPM_Msk (0x400UL) /* ATREPM (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_ACLRM_Pos (9UL) /* ACLRM (Bit 9) */ +#define LINK_REG_PIPE_CTR_ACLRM_Msk (0x200UL) /* ACLRM (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ +#define LINK_REG_PIPE_CTR_SQCLR_Msk (0x100UL) /* SQCLR (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_SQSET_Pos (7UL) /* SQSET (Bit 7) */ +#define LINK_REG_PIPE_CTR_SQSET_Msk (0x80UL) /* SQSET (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_SQMON_Pos (6UL) /* SQMON (Bit 6) */ +#define LINK_REG_PIPE_CTR_SQMON_Msk (0x40UL) /* SQMON (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_PBUSY_Pos (5UL) /* PBUSY (Bit 5) */ +#define LINK_REG_PIPE_CTR_PBUSY_Msk (0x20UL) /* PBUSY (Bitfield-Mask: 0x01) */ +#define LINK_REG_PIPE_CTR_PID_Pos (0UL) /* PID (Bit 0) */ +#define LINK_REG_PIPE_CTR_PID_Msk (0x3UL) /* PID (Bitfield-Mask: 0x03) */ + +// DEVADD +#define LINK_REG_DEVADD_UPPHUB_Pos (11UL) /* UPPHUB (Bit 11) */ +#define LINK_REG_DEVADD_UPPHUB_Msk (0x7800UL) /* UPPHUB (Bitfield-Mask: 0x0f) */ +#define LINK_REG_DEVADD_HUBPORT_Pos (8UL) /* HUBPORT (Bit 8) */ +#define LINK_REG_DEVADD_HUBPORT_Msk (0x700UL) /* HUBPORT (Bitfield-Mask: 0x07) */ +#define LINK_REG_DEVADD_USBSPD_Pos (6UL) /* USBSPD (Bit 6) */ +#define LINK_REG_DEVADD_USBSPD_Msk (0xc0UL) /* USBSPD (Bitfield-Mask: 0x03) */ + +// USBBCCTRL0 +#define LINK_REG_USBBCCTRL0_PDDETSTS0_Pos (9UL) /* PDDETSTS0 (Bit 9) */ +#define LINK_REG_USBBCCTRL0_PDDETSTS0_Msk (0x200UL) /* PDDETSTS0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_CHGDETSTS0_Pos (8UL) /* CHGDETSTS0 (Bit 8) */ +#define LINK_REG_USBBCCTRL0_CHGDETSTS0_Msk (0x100UL) /* CHGDETSTS0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_BATCHGE0_Pos (7UL) /* BATCHGE0 (Bit 7) */ +#define LINK_REG_USBBCCTRL0_BATCHGE0_Msk (0x80UL) /* BATCHGE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_VDMSRCE0_Pos (5UL) /* VDMSRCE0 (Bit 5) */ +#define LINK_REG_USBBCCTRL0_VDMSRCE0_Msk (0x20UL) /* VDMSRCE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_IDPSINKE0_Pos (4UL) /* IDPSINKE0 (Bit 4) */ +#define LINK_REG_USBBCCTRL0_IDPSINKE0_Msk (0x10UL) /* IDPSINKE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_VDPSRCE0_Pos (3UL) /* VDPSRCE0 (Bit 3) */ +#define LINK_REG_USBBCCTRL0_VDPSRCE0_Msk (0x8UL) /* VDPSRCE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_IDMSINKE0_Pos (2UL) /* IDMSINKE0 (Bit 2) */ +#define LINK_REG_USBBCCTRL0_IDMSINKE0_Msk (0x4UL) /* IDMSINKE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_IDPSRCE0_Pos (1UL) /* IDPSRCE0 (Bit 1) */ +#define LINK_REG_USBBCCTRL0_IDPSRCE0_Msk (0x2UL) /* IDPSRCE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBBCCTRL0_RPDME0_Pos (0UL) /* RPDME0 (Bit 0) */ +#define LINK_REG_USBBCCTRL0_RPDME0_Msk (0x1UL) /* RPDME0 (Bitfield-Mask: 0x01) */ + +// UCKSEL +#define LINK_REG_UCKSEL_UCKSELC_Pos (0UL) /* UCKSELC (Bit 0) */ +#define LINK_REG_UCKSEL_UCKSELC_Msk (0x1UL) /* UCKSELC (Bitfield-Mask: 0x01) */ + +// USBMC +#define LINK_REG_USBMC_VDCEN_Pos (7UL) /* VDCEN (Bit 7) */ +#define LINK_REG_USBMC_VDCEN_Msk (0x80UL) /* VDCEN (Bitfield-Mask: 0x01) */ +#define LINK_REG_USBMC_VDDUSBE_Pos (0UL) /* VDDUSBE (Bit 0) */ +#define LINK_REG_USBMC_VDDUSBE_Msk (0x1UL) /* VDDUSBE (Bitfield-Mask: 0x01) */ + +// PHYSLEW +#define LINK_REG_PHYSLEW_SLEWF01_Pos (3UL) /* SLEWF01 (Bit 3) */ +#define LINK_REG_PHYSLEW_SLEWF01_Msk (0x8UL) /* SLEWF01 (Bitfield-Mask: 0x01) */ +#define LINK_REG_PHYSLEW_SLEWF00_Pos (2UL) /* SLEWF00 (Bit 2) */ +#define LINK_REG_PHYSLEW_SLEWF00_Msk (0x4UL) /* SLEWF00 (Bitfield-Mask: 0x01) */ +#define LINK_REG_PHYSLEW_SLEWR01_Pos (1UL) /* SLEWR01 (Bit 1) */ +#define LINK_REG_PHYSLEW_SLEWR01_Msk (0x2UL) /* SLEWR01 (Bitfield-Mask: 0x01) */ +#define LINK_REG_PHYSLEW_SLEWR00_Pos (0UL) /* SLEWR00 (Bit 0) */ +#define LINK_REG_PHYSLEW_SLEWR00_Msk (0x1UL) /* SLEWR00 (Bitfield-Mask: 0x01) */ + +// LPCTRL +#define LINK_REG_LPCTRL_HWUPM_Pos (7UL) /* HWUPM (Bit 7) */ +#define LINK_REG_LPCTRL_HWUPM_Msk (0x80UL) /* HWUPM (Bitfield-Mask: 0x01) */ + +// LPSTS +#define LINK_REG_LPSTS_SUSPENDM_Pos (14UL) /* SUSPENDM (Bit 14) */ +#define LINK_REG_LPSTS_SUSPENDM_Msk (0x4000UL) /* SUSPENDM (Bitfield-Mask: 0x01) */ + +// BCCTRL +#define LINK_REG_BCCTRL_PDDETSTS_Pos (9UL) /* PDDETSTS (Bit 9) */ +#define LINK_REG_BCCTRL_PDDETSTS_Msk (0x200UL) /* PDDETSTS (Bitfield-Mask: 0x01) */ +#define LINK_REG_BCCTRL_CHGDETSTS_Pos (8UL) /* CHGDETSTS (Bit 8) */ +#define LINK_REG_BCCTRL_CHGDETSTS_Msk (0x100UL) /* CHGDETSTS (Bitfield-Mask: 0x01) */ +#define LINK_REG_BCCTRL_DCPMODE_Pos (5UL) /* DCPMODE (Bit 5) */ +#define LINK_REG_BCCTRL_DCPMODE_Msk (0x20UL) /* DCPMODE (Bitfield-Mask: 0x01) */ +#define LINK_REG_BCCTRL_VDMSRCE_Pos (4UL) /* VDMSRCE (Bit 4) */ +#define LINK_REG_BCCTRL_VDMSRCE_Msk (0x10UL) /* VDMSRCE (Bitfield-Mask: 0x01) */ +#define LINK_REG_BCCTRL_IDPSINKE_Pos (3UL) /* IDPSINKE (Bit 3) */ +#define LINK_REG_BCCTRL_IDPSINKE_Msk (0x8UL) /* IDPSINKE (Bitfield-Mask: 0x01) */ +#define LINK_REG_BCCTRL_VDPSRCE_Pos (2UL) /* VDPSRCE (Bit 2) */ +#define LINK_REG_BCCTRL_VDPSRCE_Msk (0x4UL) /* VDPSRCE (Bitfield-Mask: 0x01) */ +#define LINK_REG_BCCTRL_IDMSINKE_Pos (1UL) /* IDMSINKE (Bit 1) */ +#define LINK_REG_BCCTRL_IDMSINKE_Msk (0x2UL) /* IDMSINKE (Bitfield-Mask: 0x01) */ +#define LINK_REG_BCCTRL_IDPSRCE_Pos (0UL) /* IDPSRCE (Bit 0) */ +#define LINK_REG_BCCTRL_IDPSRCE_Msk (0x1UL) /* IDPSRCE (Bitfield-Mask: 0x01) */ + +// PL1CTRL1 +#define LINK_REG_PL1CTRL1_L1EXTMD_Pos (14UL) /* L1EXTMD (Bit 14) */ +#define LINK_REG_PL1CTRL1_L1EXTMD_Msk (0x4000UL) /* L1EXTMD (Bitfield-Mask: 0x01) */ +#define LINK_REG_PL1CTRL1_HIRDTHR_Pos (8UL) /* HIRDTHR (Bit 8) */ +#define LINK_REG_PL1CTRL1_HIRDTHR_Msk (0xf00UL) /* HIRDTHR (Bitfield-Mask: 0x0f) */ +#define LINK_REG_PL1CTRL1_DVSQ_Pos (4UL) /* DVSQ (Bit 4) */ +#define LINK_REG_PL1CTRL1_DVSQ_Msk (0xf0UL) /* DVSQ (Bitfield-Mask: 0x0f) */ +#define LINK_REG_PL1CTRL1_L1NEGOMD_Pos (3UL) /* L1NEGOMD (Bit 3) */ +#define LINK_REG_PL1CTRL1_L1NEGOMD_Msk (0x8UL) /* L1NEGOMD (Bitfield-Mask: 0x01) */ +#define LINK_REG_PL1CTRL1_L1RESPMD_Pos (1UL) /* L1RESPMD (Bit 1) */ +#define LINK_REG_PL1CTRL1_L1RESPMD_Msk (0x6UL) /* L1RESPMD (Bitfield-Mask: 0x03) */ +#define LINK_REG_PL1CTRL1_L1RESPEN_Pos (0UL) /* L1RESPEN (Bit 0) */ +#define LINK_REG_PL1CTRL1_L1RESPEN_Msk (0x1UL) /* L1RESPEN (Bitfield-Mask: 0x01) */ + +// PL1CTRL2 +#define LINK_REG_PL1CTRL2_RWEMON_Pos (12UL) /* RWEMON (Bit 12) */ +#define LINK_REG_PL1CTRL2_RWEMON_Msk (0x1000UL) /* RWEMON (Bitfield-Mask: 0x01) */ +#define LINK_REG_PL1CTRL2_HIRDMON_Pos (8UL) /* HIRDMON (Bit 8) */ +#define LINK_REG_PL1CTRL2_HIRDMON_Msk (0xf00UL) /* HIRDMON (Bitfield-Mask: 0x0f) */ + +// HL1CTRL1 +#define LINK_REG_HL1CTRL1_L1STATUS_Pos (1UL) /* L1STATUS (Bit 1) */ +#define LINK_REG_HL1CTRL1_L1STATUS_Msk (0x6UL) /* L1STATUS (Bitfield-Mask: 0x03) */ +#define LINK_REG_HL1CTRL1_L1REQ_Pos (0UL) /* L1REQ (Bit 0) */ +#define LINK_REG_HL1CTRL1_L1REQ_Msk (0x1UL) /* L1REQ (Bitfield-Mask: 0x01) */ + +// HL1CTRL2 +#define LINK_REG_HL1CTRL2_BESL_Pos (15UL) /* BESL (Bit 15) */ +#define LINK_REG_HL1CTRL2_BESL_Msk (0x8000UL) /* BESL (Bitfield-Mask: 0x01) */ +#define LINK_REG_HL1CTRL2_L1RWE_Pos (12UL) /* L1RWE (Bit 12) */ +#define LINK_REG_HL1CTRL2_L1RWE_Msk (0x1000UL) /* L1RWE (Bitfield-Mask: 0x01) */ +#define LINK_REG_HL1CTRL2_HIRD_Pos (8UL) /* HIRD (Bit 8) */ +#define LINK_REG_HL1CTRL2_HIRD_Msk (0xf00UL) /* HIRD (Bitfield-Mask: 0x0f) */ +#define LINK_REG_HL1CTRL2_L1ADDR_Pos (0UL) /* L1ADDR (Bit 0) */ +#define LINK_REG_HL1CTRL2_L1ADDR_Msk (0xfUL) /* L1ADDR (Bitfield-Mask: 0x0f) */ + +// DPUSR0R +#define LINK_REG_DPUSR0R_DVBSTSHM_Pos (23UL) /* DVBSTSHM (Bit 23) */ +#define LINK_REG_DPUSR0R_DVBSTSHM_Msk (0x800000UL) /* DVBSTSHM (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_DOVCBHM_Pos (21UL) /* DOVCBHM (Bit 21) */ +#define LINK_REG_DPUSR0R_DOVCBHM_Msk (0x200000UL) /* DOVCBHM (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_DOVCAHM_Pos (20UL) /* DOVCAHM (Bit 20) */ +#define LINK_REG_DPUSR0R_DOVCAHM_Msk (0x100000UL) /* DOVCAHM (Bitfield-Mask: 0x01) */ + +// DPUSR1R +#define LINK_REG_DPUSR1R_DVBSTSH_Pos (23UL) /* DVBSTSH (Bit 23) */ +#define LINK_REG_DPUSR1R_DVBSTSH_Msk (0x800000UL) /* DVBSTSH (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_DOVCBH_Pos (21UL) /* DOVCBH (Bit 21) */ +#define LINK_REG_DPUSR1R_DOVCBH_Msk (0x200000UL) /* DOVCBH (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_DOVCAH_Pos (20UL) /* DOVCAH (Bit 20) */ +#define LINK_REG_DPUSR1R_DOVCAH_Msk (0x100000UL) /* DOVCAH (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_DVBSTSHE_Pos (7UL) /* DVBSTSHE (Bit 7) */ +#define LINK_REG_DPUSR1R_DVBSTSHE_Msk (0x80UL) /* DVBSTSHE (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_DOVCBHE_Pos (5UL) /* DOVCBHE (Bit 5) */ +#define LINK_REG_DPUSR1R_DOVCBHE_Msk (0x20UL) /* DOVCBHE (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_DOVCAHE_Pos (4UL) /* DOVCAHE (Bit 4) */ +#define LINK_REG_DPUSR1R_DOVCAHE_Msk (0x10UL) /* DOVCAHE (Bitfield-Mask: 0x01) */ + +// DPUSR2R +#define LINK_REG_DPUSR2R_DMINTE_Pos (9UL) /* DMINTE (Bit 9) */ +#define LINK_REG_DPUSR2R_DMINTE_Msk (0x200UL) /* DMINTE (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR2R_DPINTE_Pos (8UL) /* DPINTE (Bit 8) */ +#define LINK_REG_DPUSR2R_DPINTE_Msk (0x100UL) /* DPINTE (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR2R_DMVAL_Pos (5UL) /* DMVAL (Bit 5) */ +#define LINK_REG_DPUSR2R_DMVAL_Msk (0x20UL) /* DMVAL (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR2R_DPVAL_Pos (4UL) /* DPVAL (Bit 4) */ +#define LINK_REG_DPUSR2R_DPVAL_Msk (0x10UL) /* DPVAL (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR2R_DMINT_Pos (1UL) /* DMINT (Bit 1) */ +#define LINK_REG_DPUSR2R_DMINT_Msk (0x2UL) /* DMINT (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR2R_DPINT_Pos (0UL) /* DPINT (Bit 0) */ +#define LINK_REG_DPUSR2R_DPINT_Msk (0x1UL) /* DPINT (Bitfield-Mask: 0x01) */ + +// DPUSRCR +#define LINK_REG_DPUSRCR_FIXPHYPD_Pos (1UL) /* FIXPHYPD (Bit 1) */ +#define LINK_REG_DPUSRCR_FIXPHYPD_Msk (0x2UL) /* FIXPHYPD (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSRCR_FIXPHY_Pos (0UL) /* FIXPHY (Bit 0) */ +#define LINK_REG_DPUSRCR_FIXPHY_Msk (0x1UL) /* FIXPHY (Bitfield-Mask: 0x01) */ + +// DPUSR0R_FS +#define LINK_REG_DPUSR0R_FS_DVBSTS0_Pos (23UL) /* DVBSTS0 (Bit 23) */ +#define LINK_REG_DPUSR0R_FS_DVBSTS0_Msk (0x800000UL) /* DVBSTS0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_DOVCB0_Pos (21UL) /* DOVCB0 (Bit 21) */ +#define LINK_REG_DPUSR0R_FS_DOVCB0_Msk (0x200000UL) /* DOVCB0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_DOVCA0_Pos (20UL) /* DOVCA0 (Bit 20) */ +#define LINK_REG_DPUSR0R_FS_DOVCA0_Msk (0x100000UL) /* DOVCA0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_DM0_Pos (17UL) /* DM0 (Bit 17) */ +#define LINK_REG_DPUSR0R_FS_DM0_Msk (0x20000UL) /* DM0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_DP0_Pos (16UL) /* DP0 (Bit 16) */ +#define LINK_REG_DPUSR0R_FS_DP0_Msk (0x10000UL) /* DP0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_FIXPHY0_Pos (4UL) /* FIXPHY0 (Bit 4) */ +#define LINK_REG_DPUSR0R_FS_FIXPHY0_Msk (0x10UL) /* FIXPHY0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_DRPD0_Pos (3UL) /* DRPD0 (Bit 3) */ +#define LINK_REG_DPUSR0R_FS_DRPD0_Msk (0x8UL) /* DRPD0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_RPUE0_Pos (1UL) /* RPUE0 (Bit 1) */ +#define LINK_REG_DPUSR0R_FS_RPUE0_Msk (0x2UL) /* RPUE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR0R_FS_SRPC0_Pos (0UL) /* SRPC0 (Bit 0) */ +#define LINK_REG_DPUSR0R_FS_SRPC0_Msk (0x1UL) /* SRPC0 (Bitfield-Mask: 0x01) */ + +// DPUSR1R_FS +#define LINK_REG_DPUSR1R_FS_DVBINT0_Pos (23UL) /* DVBINT0 (Bit 23) */ +#define LINK_REG_DPUSR1R_FS_DVBINT0_Msk (0x800000UL) /* DVBINT0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRB0_Pos (21UL) /* DOVRCRB0 (Bit 21) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRB0_Msk (0x200000UL) /* DOVRCRB0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRA0_Pos (20UL) /* DOVRCRA0 (Bit 20) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRA0_Msk (0x100000UL) /* DOVRCRA0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DMINT0_Pos (17UL) /* DMINT0 (Bit 17) */ +#define LINK_REG_DPUSR1R_FS_DMINT0_Msk (0x20000UL) /* DMINT0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DPINT0_Pos (16UL) /* DPINT0 (Bit 16) */ +#define LINK_REG_DPUSR1R_FS_DPINT0_Msk (0x10000UL) /* DPINT0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DVBSE0_Pos (7UL) /* DVBSE0 (Bit 7) */ +#define LINK_REG_DPUSR1R_FS_DVBSE0_Msk (0x80UL) /* DVBSE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRBE0_Pos (5UL) /* DOVRCRBE0 (Bit 5) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRBE0_Msk (0x20UL) /* DOVRCRBE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRAE0_Pos (4UL) /* DOVRCRAE0 (Bit 4) */ +#define LINK_REG_DPUSR1R_FS_DOVRCRAE0_Msk (0x10UL) /* DOVRCRAE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DMINTE0_Pos (1UL) /* DMINTE0 (Bit 1) */ +#define LINK_REG_DPUSR1R_FS_DMINTE0_Msk (0x2UL) /* DMINTE0 (Bitfield-Mask: 0x01) */ +#define LINK_REG_DPUSR1R_FS_DPINTE0_Pos (0UL) /* DPINTE0 (Bit 0) */ +#define LINK_REG_DPUSR1R_FS_DPINTE0_Msk (0x1UL) /* DPINTE0 (Bitfield-Mask: 0x01) */ /*--------------------------------------------------------------------*/ /* Register Bit Utils */ /*--------------------------------------------------------------------*/ -#define LINK_REG_PIPE_CTR_PID_NAK (0U << LINK_REG_PIPE_CTR_PID_Pos) /* NAK response */ -#define LINK_REG_PIPE_CTR_PID_BUF (1U << LINK_REG_PIPE_CTR_PID_Pos) /* BUF response (depends buffer state) */ -#define LINK_REG_PIPE_CTR_PID_STALL (2U << LINK_REG_PIPE_CTR_PID_Pos) /* STALL response */ +#define LINK_REG_PIPE_CTR_PID_NAK (0U << LINK_REG_PIPE_CTR_PID_Pos) /* NAK response */ +#define LINK_REG_PIPE_CTR_PID_BUF (1U << LINK_REG_PIPE_CTR_PID_Pos) /* BUF response (depends buffer state) */ +#define LINK_REG_PIPE_CTR_PID_STALL (2U << LINK_REG_PIPE_CTR_PID_Pos) /* STALL response */ + +#define LINK_REG_DVSTCTR0_RHST_LS (1U << LINK_REG_DVSTCTR0_RHST_Pos) /* Low-speed connection */ +#define LINK_REG_DVSTCTR0_RHST_FS (2U << LINK_REG_DVSTCTR0_RHST_Pos) /* Full-speed connection */ -#define LINK_REG_DVSTCTR0_RHST_LS (1U << LINK_REG_DVSTCTR0_RHST_Pos) /* Low-speed connection */ -#define LINK_REG_DVSTCTR0_RHST_FS (2U << LINK_REG_DVSTCTR0_RHST_Pos) /* Full-speed connection */ +#define LINK_REG_DEVADD_USBSPD_LS (1U << LINK_REG_DEVADD_USBSPD_Pos) /* Target Device Low-speed */ +#define LINK_REG_DEVADD_USBSPD_FS (2U << LINK_REG_DEVADD_USBSPD_Pos) /* Target Device Full-speed */ -#define LINK_REG_DEVADD_USBSPD_LS (1U << LINK_REG_DEVADD_USBSPD_Pos) /* Target Device Low-speed */ -#define LINK_REG_DEVADD_USBSPD_FS (2U << LINK_REG_DEVADD_USBSPD_Pos) /* Target Device Full-speed */ +#define LINK_REG_CFIFOSEL_ISEL_WRITE (1U << LINK_REG_CFIFOSEL_ISEL_Pos) /* FIFO write AKA TX*/ -#define LINK_REG_CFIFOSEL_ISEL_WRITE (1U << LINK_REG_CFIFOSEL_ISEL_Pos) /* FIFO write AKA TX*/ +#define LINK_REG_FIFOSEL_BIGEND (1U << LINK_REG_CFIFOSEL_BIGEND_Pos) /* FIFO Big Endian */ +#define LINK_REG_FIFOSEL_MBW_8BIT (0U << LINK_REG_CFIFOSEL_MBW_Pos) /* 8-bit width */ +#define LINK_REG_FIFOSEL_MBW_16BIT (1U << LINK_REG_CFIFOSEL_MBW_Pos) /* 16-bit width */ -#define LINK_REG_FIFOSEL_BIGEND (1U << LINK_REG_CFIFOSEL_BIGEND_Pos) /* FIFO Big Endian */ -#define LINK_REG_FIFOSEL_MBW_8BIT (0U << LINK_REG_CFIFOSEL_MBW_Pos) /* 8-bit width */ -#define LINK_REG_FIFOSEL_MBW_16BIT (1U << LINK_REG_CFIFOSEL_MBW_Pos) /* 16-bit width */ +#define LINK_REG_INTSTS0_CTSQ_CTRL_RDATA (1U << LINK_REG_INTSTS0_CTSQ_Pos) -#define LINK_REG_INTSTS0_CTSQ_CTRL_RDATA (1U << LINK_REG_INTSTS0_CTSQ_Pos) +#define LINK_REG_INTSTS0_DVSQ_STATE_DEF (1U << LINK_REG_INTSTS0_DVSQ_Pos) /* Default state */ +#define LINK_REG_INTSTS0_DVSQ_STATE_ADDR (2U << LINK_REG_INTSTS0_DVSQ_Pos) /* Address state */ +#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP0 (4U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP1 (5U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP2 (6U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP3 (7U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_DEF (1U << LINK_REG_INTSTS0_DVSQ_Pos) /* Default state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_ADDR (2U << LINK_REG_INTSTS0_DVSQ_Pos) /* Address state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP0 (4U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP1 (5U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP2 (6U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ -#define LINK_REG_INTSTS0_DVSQ_STATE_SUSP3 (7U << LINK_REG_INTSTS0_DVSQ_Pos) /* Suspend state */ +#define LINK_REG_PIPECFG_TYPE_BULK (1U << LINK_REG_PIPECFG_TYPE_Pos) +#define LINK_REG_PIPECFG_TYPE_INT (2U << LINK_REG_PIPECFG_TYPE_Pos) +#define LINK_REG_PIPECFG_TYPE_ISO (3U << LINK_REG_PIPECFG_TYPE_Pos) + +//--------------------------------------------------------------------+ +// Static Assert +//--------------------------------------------------------------------+ + +TU_VERIFY_STATIC(sizeof(LINK_REG_PIPE_TR_t) == 4, "incorrect size"); -#define LINK_REG_PIPECFG_TYPE_BULK (1U << LINK_REG_PIPECFG_TYPE_Pos) -#define LINK_REG_PIPECFG_TYPE_INT (2U << LINK_REG_PIPECFG_TYPE_Pos) -#define LINK_REG_PIPECFG_TYPE_ISO (3U << LINK_REG_PIPECFG_TYPE_Pos) +TU_VERIFY_STATIC(offsetof(LINK_REG_t, SYSCFG ) == 0x00000000, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, BUSWAIT ) == 0x00000002, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, SYSSTS0 ) == 0x00000004, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PLLSTA ) == 0x00000006, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DVSTCTR0 ) == 0x00000008, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, TESTMODE ) == 0x0000000C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFO ) == 0x00000014, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFO ) == 0x00000018, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFO ) == 0x0000001C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFOSEL ) == 0x00000020, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, CFIFOCTR ) == 0x00000022, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFOSEL ) == 0x00000028, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, D0FIFOCTR ) == 0x0000002A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFOSEL ) == 0x0000002C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, D1FIFOCTR ) == 0x0000002E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTENB0 ) == 0x00000030, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTENB1 ) == 0x00000032, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, BRDYENB ) == 0x00000036, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, NRDYENB ) == 0x00000038, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, BEMPENB ) == 0x0000003A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, SOFCFG ) == 0x0000003C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PHYSET ) == 0x0000003E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTSTS0 ) == 0x00000040, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, INTSTS1 ) == 0x00000042, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, BRDYSTS ) == 0x00000046, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, NRDYSTS ) == 0x00000048, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, BEMPSTS ) == 0x0000004A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, FRMNUM ) == 0x0000004C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, UFRMNUM ) == 0x0000004E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBADDR ) == 0x00000050, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBREQ ) == 0x00000054, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBVAL ) == 0x00000056, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBINDX ) == 0x00000058, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBLENG ) == 0x0000005A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPCFG ) == 0x0000005C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPMAXP ) == 0x0000005E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DCPCTR ) == 0x00000060, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPESEL ) == 0x00000064, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPECFG ) == 0x00000068, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPEMAXP ) == 0x0000006C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPEPERI ) == 0x0000006E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPE_CTR ) == 0x00000070, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PIPE_TR ) == 0x00000090, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBBCCTRL0 ) == 0x000000B0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, UCKSEL ) == 0x000000C4, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, USBMC ) == 0x000000CC, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DEVADD ) == 0x000000D0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PHYSLEW ) == 0x000000F0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, LPCTRL ) == 0x00000100, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, LPSTS ) == 0x00000102, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, BCCTRL ) == 0x00000140, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PL1CTRL1 ) == 0x00000144, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, PL1CTRL2 ) == 0x00000146, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, HL1CTRL1 ) == 0x00000148, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, HL1CTRL2 ) == 0x0000014A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR0R ) == 0x00000160, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR1R ) == 0x00000164, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR2R ) == 0x00000168, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSRCR ) == 0x0000016A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR0R_FS ) == 0x00000400, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(LINK_REG_t, DPUSR1R_FS ) == 0x00000404, "incorrect offset"); #ifdef __cplusplus } -- cgit v1.3.1 From ffdffc7e06080cfaf94b5c318053576d48cb604e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Mar 2023 23:11:11 +0700 Subject: rename FREERTOS_PORT to FREERTOS_PORTABLE_SRC also fix trailing spaces --- examples/device/cdc_msc_freertos/Makefile | 8 ++++---- examples/device/hid_composite_freertos/Makefile | 10 +++++----- hw/bsp/ch32v307/family.mk | 10 +++++----- hw/bsp/d5035_01/board.mk | 2 +- hw/bsp/da14695_dk_usb/board.mk | 3 +-- hw/bsp/da1469x_dk_pro/board.mk | 3 +-- hw/bsp/ea4088qs/board.mk | 2 +- hw/bsp/ea4357/board.mk | 2 +- hw/bsp/fomu/family.mk | 4 ++-- hw/bsp/frdm_k32l2b/board.mk | 2 +- hw/bsp/frdm_kl25z/board.mk | 2 +- hw/bsp/gd32vf103/family.mk | 4 ++-- hw/bsp/imxrt/family.mk | 4 ++-- hw/bsp/kuiic/board.mk | 4 ++-- hw/bsp/lpc15/family.mk | 4 ++-- hw/bsp/lpc18/family.mk | 2 +- hw/bsp/lpc54/family.mk | 4 ++-- hw/bsp/lpc55/family.mk | 2 +- hw/bsp/lpcxpresso11u37/board.mk | 6 +++--- hw/bsp/lpcxpresso11u68/board.mk | 6 +++--- hw/bsp/lpcxpresso1347/board.mk | 4 ++-- hw/bsp/lpcxpresso1769/board.mk | 2 +- hw/bsp/lpcxpresso51u68/board.mk | 6 +++--- hw/bsp/mbed1768/board.mk | 5 ++--- hw/bsp/mm32/family.mk | 6 +++--- hw/bsp/msp432e4/family.mk | 2 +- hw/bsp/ngx4330/board.mk | 4 ++-- hw/bsp/nrf/family.mk | 2 +- hw/bsp/nutiny_nuc121s/board.mk | 2 +- hw/bsp/nutiny_nuc125s/board.mk | 2 +- hw/bsp/nutiny_nuc126v/board.mk | 2 +- hw/bsp/nutiny_sdk_nuc120/board.mk | 2 +- hw/bsp/nutiny_sdk_nuc505/board.mk | 6 +++--- hw/bsp/ra/family.mk | 2 +- hw/bsp/rx/boards/gr_citrus/board.mk | 2 +- hw/bsp/rx/boards/rx65n_target/board.mk | 2 +- hw/bsp/samd11/family.mk | 2 +- hw/bsp/samd21/family.mk | 2 +- hw/bsp/samd51/family.mk | 2 +- hw/bsp/same54xplainedpro/board.mk | 2 +- hw/bsp/same70_qmtech/board.mk | 2 +- hw/bsp/same70_xplained/board.mk | 4 ++-- hw/bsp/samg55xplained/board.mk | 4 ++-- hw/bsp/saml2x/family.mk | 2 +- hw/bsp/sltb009a/board.mk | 2 +- hw/bsp/stm32f0/family.mk | 2 +- hw/bsp/stm32f1/family.mk | 2 +- hw/bsp/stm32f207nucleo/board.mk | 2 +- hw/bsp/stm32f303disco/board.mk | 2 +- hw/bsp/stm32f4/family.mk | 2 +- hw/bsp/stm32f7/family.mk | 2 +- hw/bsp/stm32g4/family.mk | 4 ++-- hw/bsp/stm32h7/family.mk | 3 +-- hw/bsp/stm32l0/family.mk | 2 +- hw/bsp/stm32l0538disco/board.mk | 4 ++-- hw/bsp/stm32l4/family.mk | 2 +- hw/bsp/stm32u5/family.mk | 4 ++-- hw/bsp/stm32wb/family.mk | 2 +- hw/bsp/tm4c123/family.mk | 4 ++-- hw/bsp/xmc4000/family.mk | 2 +- 60 files changed, 96 insertions(+), 100 deletions(-) (limited to 'examples/device') diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index ed3b3f0ce..73b4ce608 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -3,14 +3,14 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORT_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) INC += \ src \ src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORT) + $(TOP)/$(FREERTOS_PORTABLE_SRC) # Example source EXAMPLE_SOURCE = \ @@ -27,10 +27,10 @@ SRC_C += \ $(FREERTOS_SRC)/queue.c \ $(FREERTOS_SRC)/tasks.c \ $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.c)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.s)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) # include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 # SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index f4410b202..9d30fddf7 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -3,21 +3,21 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORT_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) INC += \ src \ src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORT) + $(TOP)/$(FREERTOS_PORTABLE_SRC) # Example source EXAMPLE_SOURCE = \ src/freertos_hook.c \ src/main.c \ src/usb_descriptors.c - + SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) # FreeRTOS source, all files in port folder @@ -26,10 +26,10 @@ SRC_C += \ $(FREERTOS_SRC)/queue.c \ $(FREERTOS_SRC)/tasks.c \ $(FREERTOS_SRC)/timers.c \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.c)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) SRC_S += \ - $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORT)/*.s)) + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) # include heap manage if configSUPPORT_DYNAMIC_ALLOCATION = 1 # SRC_C += $(FREERTOS_SRC)/portable/MemMang/heap_1.c diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 15f6724a8..4b06cf429 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -34,23 +34,23 @@ SRC_C += \ $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_gpio.c \ $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_misc.c \ $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_rcc.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_usart.c - + $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_usart.c + SRC_S += \ - $(CH32V307_SDK_SRC)/Startup/startup_ch32v30x_D8C.S + $(CH32V307_SDK_SRC)/Startup/startup_ch32v30x_D8C.S INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/$(CH32V307_SDK_SRC)/Peripheral/inc # For freeRTOS port source -FREERTOS_PORT = RISC-V +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # wch-link is not supported yet in official openOCD yet. We need to either use # 1. download openocd as part of mounriver studio http://www.mounriver.com/download or # 2. compiled from modified source https://github.com/kprasadvnsi/riscv-openocd-wch # -# Note: For Linux, somehow openocd in mounriver studio does not seem to have wch-link enable, +# Note: For Linux, somehow openocd in mounriver studio does not seem to have wch-link enable, # therefore we need to compile it from source as follows: # git clone https://github.com/kprasadvnsi/riscv-openocd-wch # cd riscv-openocd-wch diff --git a/hw/bsp/d5035_01/board.mk b/hw/bsp/d5035_01/board.mk index cefd8c935..fc196b339 100644 --- a/hw/bsp/d5035_01/board.mk +++ b/hw/bsp/d5035_01/board.mk @@ -52,7 +52,7 @@ INC += \ $(TOP)/hw/mcu/microchip/same51/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = ATSAME51J19 diff --git a/hw/bsp/da14695_dk_usb/board.mk b/hw/bsp/da14695_dk_usb/board.mk index 2ca7f8529..1f7bc1588 100644 --- a/hw/bsp/da14695_dk_usb/board.mk +++ b/hw/bsp/da14695_dk_usb/board.mk @@ -31,7 +31,7 @@ INC += \ $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM33_NTZ/non_secure +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure # For flash-jlink target JLINK_DEVICE = DA14695 @@ -52,4 +52,3 @@ flash-dialog: $(BUILD)/$(PROJECT).bin @echo go >> $(BUILD)/$(BOARD).jlink @echo exit >> $(BUILD)/$(BOARD).jlink $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink - diff --git a/hw/bsp/da1469x_dk_pro/board.mk b/hw/bsp/da1469x_dk_pro/board.mk index d9dd5cd65..f9bf480de 100644 --- a/hw/bsp/da1469x_dk_pro/board.mk +++ b/hw/bsp/da1469x_dk_pro/board.mk @@ -31,7 +31,7 @@ INC += \ $(TOP)/$(MCU_FAMILY_DIR)/SDK_10.0.8.105/sdk/bsp/include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM33_NTZ/non_secure +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure # For flash-jlink target JLINK_DEVICE = DA14699 @@ -52,4 +52,3 @@ flash-dialog: $(BUILD)/$(PROJECT).bin @echo go >> $(BUILD)/$(BOARD).jlink @echo exit >> $(BUILD)/$(BOARD).jlink $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/$(BOARD).jlink - diff --git a/hw/bsp/ea4088qs/board.mk b/hw/bsp/ea4088qs/board.mk index 54195b20c..376840fb1 100644 --- a/hw/bsp/ea4088qs/board.mk +++ b/hw/bsp/ea4088qs/board.mk @@ -37,7 +37,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = LPC4088 diff --git a/hw/bsp/ea4357/board.mk b/hw/bsp/ea4357/board.mk index 4556e98f6..6fd229166 100644 --- a/hw/bsp/ea4357/board.mk +++ b/hw/bsp/ea4357/board.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc/config_43xx # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = LPC4357_M4 diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index 8f8f3d011..d0b819120 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -19,12 +19,12 @@ INC += \ $(TOP)/$(FAMILY_PATH)/include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RISC-V +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # flash using dfu-util $(BUILD)/$(PROJECT).dfu: $(BUILD)/$(PROJECT).bin @echo "Create $@" python $(TOP)/hw/bsp/$(BOARD)/dfu.py -b $^ -D 0x1209:0x5bf0 $@ - + flash: $(BUILD)/$(PROJECT).dfu dfu-util -D $^ diff --git a/hw/bsp/frdm_k32l2b/board.mk b/hw/bsp/frdm_k32l2b/board.mk index f922fc433..feb0a25f4 100644 --- a/hw/bsp/frdm_k32l2b/board.mk +++ b/hw/bsp/frdm_k32l2b/board.mk @@ -39,7 +39,7 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = MKL25Z128xxx4 diff --git a/hw/bsp/frdm_kl25z/board.mk b/hw/bsp/frdm_kl25z/board.mk index 2ac089404..fd616f7ed 100644 --- a/hw/bsp/frdm_kl25z/board.mk +++ b/hw/bsp/frdm_kl25z/board.mk @@ -40,7 +40,7 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_MKL25Z4.S # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = MKL25Z128xxx4 diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index c0c144f5c..1725559c4 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -44,7 +44,7 @@ SRC_C += \ $(LIBC_STUBS)/isatty.c \ $(LIBC_STUBS)/fstat.c \ $(LIBC_STUBS)/lseek.c \ - $(LIBC_STUBS)/read.c + $(LIBC_STUBS)/read.c SRC_S += \ $(STARTUP_ASM)/startup_gd32vf103.S \ @@ -57,7 +57,7 @@ INC += \ $(TOP)/$(GD32VF103_SDK_SOC)/Common/Include/Usb # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RISC-V +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # For flash-jlink target JLINK_IF = jtag diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index f2273cb56..6788de8df 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -30,7 +30,7 @@ MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) # All source paths should be relative to the top level. LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx_flexspi_nor.ld -# TODO for net_lwip_webserver example, but may not needed !! +# TODO for net_lwip_webserver example, but may not needed !! LDFLAGS += \ -Wl,--defsym,__stack_size__=0x800 \ @@ -59,7 +59,7 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7/r0p1 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 # UF2 generation, iMXRT need to strip to text only before conversion APPLICATION_ADDR = 0x6000C000 diff --git a/hw/bsp/kuiic/board.mk b/hw/bsp/kuiic/board.mk index 94646dbde..cb3459586 100644 --- a/hw/bsp/kuiic/board.mk +++ b/hw/bsp/kuiic/board.mk @@ -35,12 +35,12 @@ INC += \ $(TOP)/$(SDK_DIR)/drivers/port \ $(TOP)/$(SDK_DIR)/drivers/lpuart \ $(TOP)/$(MCU_DIR) \ - $(TOP)/$(MCU_DIR)/drivers + $(TOP)/$(MCU_DIR)/drivers SRC_S += $(MCU_DIR)/gcc/startup_K32L2B31A.S # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = MKL25Z128xxx4 diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk index fee0e0106..0ad1220d6 100644 --- a/hw/bsp/lpc15/family.mk +++ b/hw/bsp/lpc15/family.mk @@ -12,7 +12,7 @@ CFLAGS += \ -D__USE_LPCOPEN \ -DCFG_EXAMPLE_MSC_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_LPC15XX \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -Wno-error=cast-qual @@ -36,4 +36,4 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index 8ba05c9c9..fbe6ad834 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -34,4 +34,4 @@ INC += \ $(TOP)/$(MCU_DIR)/inc/config_18xx # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index 3af679bda..0ec59f9bf 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -11,7 +11,7 @@ CFLAGS += \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' ifeq ($(PORT), 1) $(info "PORT1 High Speed") @@ -51,4 +51,4 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index 58fc18a5c..789f7727d 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -65,4 +65,4 @@ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM33_NTZ/non_secure +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure diff --git a/hw/bsp/lpcxpresso11u37/board.mk b/hw/bsp/lpcxpresso11u37/board.mk index a9e63ad67..61e5eda7e 100644 --- a/hw/bsp/lpcxpresso11u37/board.mk +++ b/hw/bsp/lpcxpresso11u37/board.mk @@ -12,7 +12,7 @@ CFLAGS += \ -DCFG_EXAMPLE_VIDEO_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=redundant-decls @@ -36,11 +36,11 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = LPC11U37/401 -# flash using pyocd +# flash using pyocd flash: $(BUILD)/$(PROJECT).hex pyocd flash -t lpc11u37 $< diff --git a/hw/bsp/lpcxpresso11u68/board.mk b/hw/bsp/lpcxpresso11u68/board.mk index 9647b8b8f..cd6ad3617 100644 --- a/hw/bsp/lpcxpresso11u68/board.mk +++ b/hw/bsp/lpcxpresso11u68/board.mk @@ -11,7 +11,7 @@ CFLAGS += \ -D__USE_LPCOPEN \ -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' MCU_DIR = hw/mcu/nxp/lpcopen/lpc11u6x/lpc_chip_11u6x @@ -32,11 +32,11 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = LPC11U68 -# flash using pyocd +# flash using pyocd flash: $(BUILD)/$(PROJECT).hex pyocd flash -t lpc11u68 $< diff --git a/hw/bsp/lpcxpresso1347/board.mk b/hw/bsp/lpcxpresso1347/board.mk index 79405c896..25d6fa7a3 100644 --- a/hw/bsp/lpcxpresso1347/board.mk +++ b/hw/bsp/lpcxpresso1347/board.mk @@ -12,7 +12,7 @@ CFLAGS += \ -DCFG_EXAMPLE_VIDEO_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \ -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' # startup.c and lpc_types.h cause following errors CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls @@ -36,7 +36,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = LPC1347 diff --git a/hw/bsp/lpcxpresso1769/board.mk b/hw/bsp/lpcxpresso1769/board.mk index ecafccc49..d459c8b7b 100644 --- a/hw/bsp/lpcxpresso1769/board.mk +++ b/hw/bsp/lpcxpresso1769/board.mk @@ -34,7 +34,7 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = LPC1769 diff --git a/hw/bsp/lpcxpresso51u68/board.mk b/hw/bsp/lpcxpresso51u68/board.mk index 6e39bbcad..b1a126c51 100644 --- a/hw/bsp/lpcxpresso51u68/board.mk +++ b/hw/bsp/lpcxpresso51u68/board.mk @@ -9,7 +9,7 @@ CFLAGS += \ -DCPU_LPC51U68JBD64 \ -DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \ -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data")))' \ - -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' + -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter @@ -36,14 +36,14 @@ INC += \ $(TOP)/$(SDK_DIR)/drivers/common \ $(TOP)/$(SDK_DIR)/drivers/flexcomm \ $(TOP)/$(SDK_DIR)/drivers/lpc_iocon \ - $(TOP)/$(SDK_DIR)/drivers/lpc_gpio + $(TOP)/$(SDK_DIR)/drivers/lpc_gpio SRC_S += $(MCU_DIR)/gcc/startup_LPC51U68.S LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 JLINK_DEVICE = LPC51U68 PYOCD_TARGET = LPC51U68 diff --git a/hw/bsp/mbed1768/board.mk b/hw/bsp/mbed1768/board.mk index a65d6eacb..6940bbb55 100644 --- a/hw/bsp/mbed1768/board.mk +++ b/hw/bsp/mbed1768/board.mk @@ -34,12 +34,11 @@ INC += \ $(TOP)/$(MCU_DIR)/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = LPC1768 -# flash using pyocd +# flash using pyocd flash: $(BUILD)/$(PROJECT).hex pyocd flash -t lpc1768 $< - diff --git a/hw/bsp/mm32/family.mk b/hw/bsp/mm32/family.mk index c1147b4e9..81af0d166 100644 --- a/hw/bsp/mm32/family.mk +++ b/hw/bsp/mm32/family.mk @@ -11,7 +11,7 @@ CFLAGS += \ -mcpu=cortex-m3 \ -mfloat-abi=soft \ -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_MM32F327X + -DCFG_TUSB_MCU=OPT_MCU_MM32F327X # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized -Wno-error=cast-qual @@ -22,7 +22,7 @@ SRC_C += \ $(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_gpio.c \ $(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_rcc.c \ $(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_uart.c \ - + INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ @@ -30,7 +30,7 @@ INC += \ $(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 # flash target using on-board flash: flash-jlink diff --git a/hw/bsp/msp432e4/family.mk b/hw/bsp/msp432e4/family.mk index 7f823b1aa..2383bc604 100644 --- a/hw/bsp/msp432e4/family.mk +++ b/hw/bsp/msp432e4/family.mk @@ -34,7 +34,7 @@ INC += \ SRC_S += $(MCU_DIR)/Source/startup_msp432e411y_gcc.S # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = MSP432E401Y diff --git a/hw/bsp/ngx4330/board.mk b/hw/bsp/ngx4330/board.mk index 26f8ae760..99c1f194c 100644 --- a/hw/bsp/ngx4330/board.mk +++ b/hw/bsp/ngx4330/board.mk @@ -37,11 +37,11 @@ INC += \ $(TOP)/$(MCU_DIR)/inc/config_43xx # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = LPC4330 -JLINK_IF = swd +JLINK_IF = swd # flash using jlink flash: flash-jlink diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index c79d7e654..4102c8187 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -42,7 +42,7 @@ SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_$(MCU_VARIANT).S ASFLAGS += -D__HEAP_SIZE=0 # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = $(MCU_VARIANT)_xxaa diff --git a/hw/bsp/nutiny_nuc121s/board.mk b/hw/bsp/nutiny_nuc121s/board.mk index 69092dfd5..aa8f00e70 100644 --- a/hw/bsp/nutiny_nuc121s/board.mk +++ b/hw/bsp/nutiny_nuc121s/board.mk @@ -35,7 +35,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC121SC2AE diff --git a/hw/bsp/nutiny_nuc125s/board.mk b/hw/bsp/nutiny_nuc125s/board.mk index 0272564c4..bf7610a7b 100644 --- a/hw/bsp/nutiny_nuc125s/board.mk +++ b/hw/bsp/nutiny_nuc125s/board.mk @@ -31,7 +31,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc121_125/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC125SC2AE diff --git a/hw/bsp/nutiny_nuc126v/board.mk b/hw/bsp/nutiny_nuc126v/board.mk index 3d9e239af..46f53420c 100644 --- a/hw/bsp/nutiny_nuc126v/board.mk +++ b/hw/bsp/nutiny_nuc126v/board.mk @@ -37,7 +37,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc126/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC126VG4AE diff --git a/hw/bsp/nutiny_sdk_nuc120/board.mk b/hw/bsp/nutiny_sdk_nuc120/board.mk index b06d4873e..b1f9245a6 100644 --- a/hw/bsp/nutiny_sdk_nuc120/board.mk +++ b/hw/bsp/nutiny_sdk_nuc120/board.mk @@ -30,7 +30,7 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc100_120/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = NUC120LE3 diff --git a/hw/bsp/nutiny_sdk_nuc505/board.mk b/hw/bsp/nutiny_sdk_nuc505/board.mk index 3118dc7f8..3e48d3998 100644 --- a/hw/bsp/nutiny_sdk_nuc505/board.mk +++ b/hw/bsp/nutiny_sdk_nuc505/board.mk @@ -42,14 +42,14 @@ INC += \ $(TOP)/hw/mcu/nuvoton/nuc505/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = NUC505YO13Y # Note -# To be able to program the SPI flash, it need to boot with ICP mode "1011". -# However, in ICP mode, opencod cannot establish connection to the mcu. +# To be able to program the SPI flash, it need to boot with ICP mode "1011". +# However, in ICP mode, opencod cannot establish connection to the mcu. # Therefore, there is no easy command line flash for NUC505 # It is probably better to just use Nuvoton NuMicro ICP programming on windows to program the board # - 1111 "SPI" (run from internal flash) diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 3c681a7c3..d48272e61 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -52,4 +52,4 @@ INC += \ # For freeRTOS port source # hack to use the port provided by renesas -FREERTOS_PORT = hw/mcu/renesas/fsp/ra/fsp/src/rm_freertos_port +FREERTOS_PORTABLE_SRC = hw/mcu/renesas/fsp/ra/fsp/src/rm_freertos_port diff --git a/hw/bsp/rx/boards/gr_citrus/board.mk b/hw/bsp/rx/boards/gr_citrus/board.mk index 7bef40614..e3af8d9b0 100644 --- a/hw/bsp/rx/boards/gr_citrus/board.mk +++ b/hw/bsp/rx/boards/gr_citrus/board.mk @@ -9,7 +9,7 @@ MCU_DIR = hw/mcu/renesas/rx/rx63n LD_FILE = $(BOARD_PATH)/r5f5631fd.ld # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RX600 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RX600 # For flash-jlink target JLINK_DEVICE = R5F5631F diff --git a/hw/bsp/rx/boards/rx65n_target/board.mk b/hw/bsp/rx/boards/rx65n_target/board.mk index 18c7d354d..90bc0efbb 100644 --- a/hw/bsp/rx/boards/rx65n_target/board.mk +++ b/hw/bsp/rx/boards/rx65n_target/board.mk @@ -12,7 +12,7 @@ MCU_DIR = hw/mcu/renesas/rx/rx65n LD_FILE = $(BOARD_PATH)/r5f565ne.ld # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/RX600 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RX600 # For flash-jlink target JLINK_DEVICE = R5F565NE diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index ef1f1424d..dc6678b30 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -37,4 +37,4 @@ INC += \ $(TOP)/hw/mcu/microchip/samd11/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 158ea000f..6d02d7fa6 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -37,7 +37,7 @@ INC += \ $(TOP)/hw/mcu/microchip/samd21/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk index aa3af5318..3ecc5aa66 100644 --- a/hw/bsp/samd51/family.mk +++ b/hw/bsp/samd51/family.mk @@ -38,7 +38,7 @@ INC += \ $(TOP)/hw/mcu/microchip/samd51/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ diff --git a/hw/bsp/same54xplainedpro/board.mk b/hw/bsp/same54xplainedpro/board.mk index 7d7ede0f0..1c6732231 100644 --- a/hw/bsp/same54xplainedpro/board.mk +++ b/hw/bsp/same54xplainedpro/board.mk @@ -38,7 +38,7 @@ INC += \ $(TOP)/hw/mcu/microchip/same54/CMSIS/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = ATSAME54P20 diff --git a/hw/bsp/same70_qmtech/board.mk b/hw/bsp/same70_qmtech/board.mk index 77dfbe499..1dcb8bfcd 100644 --- a/hw/bsp/same70_qmtech/board.mk +++ b/hw/bsp/same70_qmtech/board.mk @@ -44,7 +44,7 @@ INC += \ $(TOP)/$(ASF_DIR)/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7 # For flash-jlink target JLINK_DEVICE = SAME70N19B diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk index 2f94512d0..95c4aaaa2 100644 --- a/hw/bsp/same70_xplained/board.mk +++ b/hw/bsp/same70_xplained/board.mk @@ -44,7 +44,7 @@ INC += \ $(TOP)/$(ASF_DIR)/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7 # For flash-jlink target JLINK_DEVICE = SAME70Q21B @@ -53,4 +53,4 @@ JLINK_DEVICE = SAME70Q21B # Note: SAME70's GPNVM1 must be set to 1 to boot from flash with # edbg -t same70 -F w0,1,1 flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t same70 -pv -f $< + edbg --verbose -t same70 -pv -f $< diff --git a/hw/bsp/samg55xplained/board.mk b/hw/bsp/samg55xplained/board.mk index 886430231..7cc9487fd 100644 --- a/hw/bsp/samg55xplained/board.mk +++ b/hw/bsp/samg55xplained/board.mk @@ -42,11 +42,11 @@ INC += \ $(TOP)/$(ASF_DIR)/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = ATSAMG55J19 # flash using edbg from https://github.com/ataradov/edbg flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t samg55 -pv -f $< + edbg --verbose -t samg55 -pv -f $< diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index 8ea553514..6022158de 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ diff --git a/hw/bsp/sltb009a/board.mk b/hw/bsp/sltb009a/board.mk index d4318b5e2..f9c1dd4db 100644 --- a/hw/bsp/sltb009a/board.mk +++ b/hw/bsp/sltb009a/board.mk @@ -35,7 +35,7 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = EFM32GG12B810F1024 diff --git a/hw/bsp/stm32f0/family.mk b/hw/bsp/stm32f0/family.mk index d57b14d53..08e349a81 100644 --- a/hw/bsp/stm32f0/family.mk +++ b/hw/bsp/stm32f0/family.mk @@ -53,4 +53,4 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk index 72ca259b7..cd1d587f1 100644 --- a/hw/bsp/stm32f1/family.mk +++ b/hw/bsp/stm32f1/family.mk @@ -44,7 +44,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = stm32f103c8 diff --git a/hw/bsp/stm32f207nucleo/board.mk b/hw/bsp/stm32f207nucleo/board.mk index f418c6c04..55581e1ec 100644 --- a/hw/bsp/stm32f207nucleo/board.mk +++ b/hw/bsp/stm32f207nucleo/board.mk @@ -39,7 +39,7 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM3 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 # For flash-jlink target JLINK_DEVICE = stm32f207zg diff --git a/hw/bsp/stm32f303disco/board.mk b/hw/bsp/stm32f303disco/board.mk index 371aba0f3..b81de4ee4 100644 --- a/hw/bsp/stm32f303disco/board.mk +++ b/hw/bsp/stm32f303disco/board.mk @@ -40,7 +40,7 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # For flash-jlink target JLINK_DEVICE = stm32f303vc diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index bc9504038..394c4a72f 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -52,7 +52,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index 0dcaa0453..b44381586 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -66,4 +66,4 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7/r0p1 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk index f8f04384a..5ed84422d 100644 --- a/hw/bsp/stm32g4/family.mk +++ b/hw/bsp/stm32g4/family.mk @@ -12,7 +12,7 @@ include $(TOP)/$(BOARD_PATH)/board.mk # -------------- CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32G4 - + # GCC Flags GCC_CFLAGS += \ -flto \ @@ -53,7 +53,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index 2641edba5..8042248a8 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -68,5 +68,4 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM7/r0p1 - +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1 diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk index 622fa61e0..67a5c69b8 100644 --- a/hw/bsp/stm32l0/family.mk +++ b/hw/bsp/stm32l0/family.mk @@ -37,4 +37,4 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/stm32l0538disco/board.mk b/hw/bsp/stm32l0538disco/board.mk index b25380c5c..72e887adf 100644 --- a/hw/bsp/stm32l0538disco/board.mk +++ b/hw/bsp/stm32l0538disco/board.mk @@ -41,12 +41,12 @@ INC += \ $(TOP)/hw/bsp/$(BOARD) # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM0 +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 # For flash-jlink target JLINK_DEVICE = STM32L053R8 -# Path to STM32 Cube Programmer CLI, should be added into system path +# Path to STM32 Cube Programmer CLI, should be added into system path STM32Prog = STM32_Programmer_CLI # flash target using on-board stlink diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk index 3ba459dc2..0e84d1af0 100644 --- a/hw/bsp/stm32l4/family.mk +++ b/hw/bsp/stm32l4/family.mk @@ -55,7 +55,7 @@ INC += \ $(TOP)/$(BOARD_PATH) # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 1cfb81e43..23d7f4dda 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -16,7 +16,7 @@ CFLAGS += \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_STM32U5 -# suppress warning caused by vendor mcu driver +# suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=undef -Wno-error=unused-parameter #src/portable/st/synopsys/dcd_synopsys.c @@ -39,7 +39,7 @@ INC += \ $(TOP)/$(BOARD_PATH) # For freeRTOS port source -FREERTOS_PORT = ARM_CM33_NTZ/non_secure +FREERTOS_PORTABLE_SRC = ARM_CM33_NTZ/non_secure # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index 66f8ff4e2..97210889c 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -38,7 +38,7 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/tm4c123/family.mk b/hw/bsp/tm4c123/family.mk index 73b65f00c..021b47fd3 100644 --- a/hw/bsp/tm4c123/family.mk +++ b/hw/bsp/tm4c123/family.mk @@ -12,7 +12,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_TM4C123 \ -uvectors \ -DTM4C123GH6PM - + # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual @@ -33,4 +33,4 @@ SRC_C += \ $(MCU_DIR)/Source/GCC/tm4c123_startup.c # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F diff --git a/hw/bsp/xmc4000/family.mk b/hw/bsp/xmc4000/family.mk index 134098dac..1094f3b72 100644 --- a/hw/bsp/xmc4000/family.mk +++ b/hw/bsp/xmc4000/family.mk @@ -37,4 +37,4 @@ INC += \ $(TOP)/$(MCU_DIR)/XMCLib/inc # For freeRTOS port source -FREERTOS_PORT = $(FREERTOS_PORT_PATH)/ARM_CM4F +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F -- cgit v1.3.1 From 3623ba1884ddff23e9b64766cb6dd032f1425846 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 17 Mar 2023 16:12:49 +0700 Subject: fix trailing space and new line temporarily disable codespell --- .gitattributes | 6 +- .github/ISSUE_TEMPLATE/bug_report.yml | 6 +- .github/workflows/trigger.yml | 4 +- .pre-commit-config.yaml | 10 +- .readthedocs.yaml | 1 - docs/assets/stack.svg | 2 +- docs/contributing/code_of_conduct.rst | 2 +- docs/info/changelog.rst | 54 +- docs/info/contributors.rst | 2 +- docs/reference/getting_started.rst | 14 +- examples/device/audio_4_channel_mic/skip.txt | 2 +- examples/device/audio_4_channel_mic/src/main.c | 2 +- .../audio_4_channel_mic/src/plot_audio_samples.py | 1 - .../audio_4_channel_mic/src/usb_descriptors.c | 2 +- examples/device/audio_test/CMakeLists.txt | 2 +- examples/device/audio_test/skip.txt | 2 +- examples/device/audio_test/src/main.c | 2 +- .../device/audio_test/src/plot_audio_samples.py | 3 +- examples/device/audio_test/src/usb_descriptors.c | 2 +- .../device/audio_test_multi_rate/CMakeLists.txt | 2 +- examples/device/audio_test_multi_rate/skip.txt | 2 +- examples/device/audio_test_multi_rate/src/main.c | 10 +- .../src/plot_audio_samples.py | 3 +- .../device/audio_test_multi_rate/src/tusb_config.h | 2 +- .../audio_test_multi_rate/src/usb_descriptors.c | 2 +- .../audio_test_multi_rate/src/usb_descriptors.h | 4 +- examples/device/board_test/src/CMakeLists.txt | 2 +- examples/device/board_test/src/main.c | 2 +- examples/device/cdc_dual_ports/CMakeLists.txt | 2 +- examples/device/cdc_dual_ports/src/main.c | 2 +- .../device/cdc_dual_ports/src/usb_descriptors.c | 2 +- examples/device/cdc_msc/CMakeLists.txt | 2 +- examples/device/cdc_msc/skip.txt | 2 +- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_msc/src/msc_disk.c | 2 +- examples/device/cdc_msc/src/usb_descriptors.c | 2 +- examples/device/cdc_msc_freertos/src/main.c | 2 +- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 +- .../device/cdc_msc_freertos/src/usb_descriptors.c | 2 +- examples/device/dfu_runtime/CMakeLists.txt | 2 +- examples/device/dfu_runtime/src/main.c | 2 +- .../device/dynamic_configuration/CMakeLists.txt | 2 +- examples/device/dynamic_configuration/skip.txt | 2 +- examples/device/dynamic_configuration/src/main.c | 2 +- .../device/dynamic_configuration/src/msc_disk.c | 2 +- .../dynamic_configuration/src/usb_descriptors.c | 2 +- examples/device/hid_boot_interface/CMakeLists.txt | 2 +- examples/device/hid_boot_interface/Makefile | 2 +- examples/device/hid_boot_interface/src/main.c | 2 +- .../hid_boot_interface/src/usb_descriptors.c | 2 +- .../hid_boot_interface/src/usb_descriptors.h | 2 +- examples/device/hid_composite/CMakeLists.txt | 2 +- examples/device/hid_composite/src/main.c | 2 +- .../device/hid_composite/src/usb_descriptors.c | 2 +- .../device/hid_composite/src/usb_descriptors.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- .../hid_composite_freertos/src/usb_descriptors.c | 2 +- .../hid_composite_freertos/src/usb_descriptors.h | 2 +- examples/device/hid_generic_inout/CMakeLists.txt | 2 +- examples/device/hid_generic_inout/hid_test.js | 3 +- examples/device/hid_generic_inout/src/main.c | 2 +- .../device/hid_generic_inout/src/usb_descriptors.c | 2 +- .../device/hid_multiple_interface/CMakeLists.txt | 2 +- examples/device/midi_test/CMakeLists.txt | 2 +- examples/device/midi_test/src/main.c | 2 +- examples/device/midi_test/src/usb_descriptors.c | 2 +- examples/device/msc_dual_lun/CMakeLists.txt | 2 +- examples/device/msc_dual_lun/skip.txt | 2 +- examples/device/msc_dual_lun/src/main.c | 2 +- examples/device/msc_dual_lun/src/msc_disk_dual.c | 2 +- examples/device/msc_dual_lun/src/usb_descriptors.c | 2 +- examples/device/net_lwip_webserver/CMakeLists.txt | 2 +- examples/device/net_lwip_webserver/skip.txt | 2 +- examples/device/net_lwip_webserver/src/arch/cc.h | 32 +- examples/device/net_lwip_webserver/src/lwipopts.h | 28 +- examples/device/net_lwip_webserver/src/main.c | 6 +- .../net_lwip_webserver/src/usb_descriptors.c | 4 +- examples/device/uac2_headset/CMakeLists.txt | 2 +- examples/device/uac2_headset/src/main.c | 4 +- examples/device/uac2_headset/src/usb_descriptors.c | 2 +- examples/device/uac2_headset/src/usb_descriptors.h | 2 +- examples/device/usbtmc/CMakeLists.txt | 2 +- examples/device/usbtmc/src/main.c | 2 +- examples/device/usbtmc/visaQuery.py | 26 +- examples/device/video_capture/CMakeLists.txt | 2 +- examples/device/video_capture/src/main.c | 2 +- .../device/video_capture/src/usb_descriptors.c | 2 +- .../device/video_capture/src/usb_descriptors.h | 2 +- examples/device/webusb_serial/CMakeLists.txt | 2 +- examples/device/webusb_serial/src/main.c | 2 +- .../device/webusb_serial/src/usb_descriptors.c | 2 +- .../device/webusb_serial/src/usb_descriptors.h | 2 +- examples/dual/host_hid_to_device_cdc/src/main.c | 2 +- .../host_hid_to_device_cdc/src/usb_descriptors.c | 2 +- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid/src/main.c | 2 +- examples/host/cdc_msc_hid/src/msc_app.c | 3 +- examples/host/hid_controller/src/main.c | 2 +- examples/host/msc_file_explorer/src/main.c | 2 +- examples/host/msc_file_explorer/src/msc_app.c | 2 +- examples/rules.mk | 2 +- hw/bsp/ansi_escape.h | 2 +- hw/bsp/board.c | 2 +- hw/bsp/board.h | 2 +- .../boards/raspberrypi_zero_w/board.h | 2 +- .../boards/raspberrypi_zero_w/board.mk | 2 +- hw/bsp/broadcom_32bit/family.c | 2 +- .../broadcom_64bit/boards/raspberrypi_cm4/board.h | 2 +- .../boards/raspberrypi_zero2w/board.h | 2 +- hw/bsp/broadcom_64bit/family.c | 2 +- hw/bsp/brtmm90x/family.c | 7 +- hw/bsp/brtmm90x/family.mk | 8 +- hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h | 2 +- .../ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c | 4 +- hw/bsp/ch32v307/ch32v307.ld | 35 +- hw/bsp/ch32v307/ch32v30x_conf.h | 7 +- hw/bsp/ch32v307/ch32v30x_it.c | 2 - hw/bsp/ch32v307/ch32v30x_it.h | 2 - hw/bsp/ch32v307/core_riscv.h | 7 +- hw/bsp/ch32v307/system_ch32v30x.c | 140 ++--- hw/bsp/ch32v307/system_ch32v30x.h | 9 +- hw/bsp/da14695_dk_usb/da14695_dk_usb.c | 2 +- hw/bsp/da14695_dk_usb/da1469x.ld | 1 - hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c | 2 +- hw/bsp/da1469x_dk_pro/da1469x.ld | 1 - hw/bsp/ea4088qs/ea4088qs.c | 2 +- hw/bsp/ea4088qs/lpc4088.ld | 54 +- hw/bsp/ea4357/ea4357.c | 2 +- hw/bsp/ea4357/lpc4357.ld | 106 ++-- hw/bsp/ea4357/pca9532.c | 6 +- hw/bsp/ea4357/pca9532.h | 2 +- hw/bsp/esp32s2/boards/CMakeLists.txt | 2 +- .../boards/adafruit_feather_esp32s2/board.cmake | 2 +- .../boards/adafruit_feather_esp32s2/board.h | 2 +- .../boards/adafruit_magtag_29gray/board.cmake | 2 +- .../esp32s2/boards/adafruit_magtag_29gray/board.h | 2 +- .../boards/adafruit_metro_esp32s2/board.cmake | 2 +- .../esp32s2/boards/adafruit_metro_esp32s2/board.h | 2 +- hw/bsp/esp32s2/boards/esp32s2.c | 3 +- .../esp32s2/boards/espressif_kaluga_1/board.cmake | 2 +- hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h | 2 +- .../esp32s2/boards/espressif_saola_1/board.cmake | 2 +- hw/bsp/esp32s2/boards/espressif_saola_1/board.h | 2 +- hw/bsp/esp32s2/components/led_strip/CMakeLists.txt | 1 - hw/bsp/esp32s2/family.cmake | 2 +- hw/bsp/esp32s2/family.mk | 1 - hw/bsp/esp32s3/boards/CMakeLists.txt | 2 +- hw/bsp/esp32s3/boards/esp32s3.c | 3 +- .../esp32s3/boards/espressif_addax_1/board.cmake | 2 +- hw/bsp/esp32s3/boards/espressif_addax_1/board.h | 2 +- .../boards/espressif_s3_devkitc/board.cmake | 2 +- hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h | 2 +- .../boards/espressif_s3_devkitm/board.cmake | 2 +- hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h | 2 +- hw/bsp/esp32s3/components/led_strip/CMakeLists.txt | 1 - hw/bsp/esp32s3/family.cmake | 2 +- hw/bsp/esp32s3/family.mk | 1 - hw/bsp/f1c100s/README.md | 2 +- hw/bsp/f1c100s/board.h | 2 +- hw/bsp/f1c100s/board.mk | 6 +- hw/bsp/f1c100s/f1c100s.c | 4 +- hw/bsp/family_support.cmake | 2 +- hw/bsp/fomu/boards/fomu/board.mk | 2 +- hw/bsp/fomu/fomu.c | 2 +- hw/bsp/fomu/include/hw/common.h | 2 +- hw/bsp/fomu/include/irq.h | 2 +- hw/bsp/frdm_k32l2b/board.h | 2 +- hw/bsp/frdm_k32l2b/frdm_k32l2b.c | 12 +- hw/bsp/frdm_kl25z/frdm_kl25z.c | 4 +- hw/bsp/gd32vf103/family.c | 2 +- hw/bsp/gd32vf103/system_gd32vf103.c | 10 +- hw/bsp/imxrt/boards/metro_m7_1011/board.h | 2 +- hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld | 2 +- hw/bsp/imxrt/boards/mimxrt1010_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1015_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1020_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1024_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1060_evk/board.h | 2 +- hw/bsp/imxrt/boards/mimxrt1064_evk/board.h | 2 +- hw/bsp/imxrt/boards/teensy_40/board.h | 2 +- hw/bsp/imxrt/boards/teensy_40/board.mk | 2 +- hw/bsp/imxrt/boards/teensy_41/board.h | 2 +- hw/bsp/imxrt/boards/teensy_41/board.mk | 2 +- hw/bsp/imxrt/family.c | 2 +- hw/bsp/kuiic/K32L2B31xxxxA_flash.ld | 1 - hw/bsp/kuiic/board.h | 2 +- hw/bsp/kuiic/kuiic.c | 16 +- hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld | 60 +- hw/bsp/lpc15/family.c | 2 +- hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 86 +-- hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 106 ++-- hw/bsp/lpc18/family.c | 2 +- hw/bsp/lpc54/boards/lpcxpresso54628/board.mk | 2 +- hw/bsp/lpc54/family.c | 2 +- .../double_m33_express/LPC55S69_cm33_core0_uf2.ld | 1 - hw/bsp/lpc55/family.c | 2 +- hw/bsp/lpcxpresso11u37/lpc11u37.ld | 50 +- hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c | 2 +- hw/bsp/lpcxpresso11u68/lpc11u68.ld | 68 +-- hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c | 2 +- hw/bsp/lpcxpresso1347/lpc1347.ld | 68 +-- hw/bsp/lpcxpresso1347/lpcxpresso1347.c | 4 +- hw/bsp/lpcxpresso1769/lpc1769.ld | 54 +- hw/bsp/lpcxpresso1769/lpcxpresso1769.c | 2 +- hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c | 2 +- hw/bsp/mbed1768/lpc1768.ld | 54 +- hw/bsp/mbed1768/mbed1768.c | 2 +- hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld | 8 +- hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c | 4 +- hw/bsp/ngx4330/ngx4330.c | 2 +- hw/bsp/ngx4330/ngx4330.ld | 80 +-- hw/bsp/nrf/boards/adafruit_clue/board.h | 2 +- .../nrf/boards/adafruit_clue/nrf52840_s140_v6.ld | 4 +- .../arduino_nano33_ble/arduino_nano33_ble.ld | 2 +- hw/bsp/nrf/boards/arduino_nano33_ble/board.h | 2 +- .../nrf/boards/circuitplayground_bluefruit/board.h | 2 +- .../nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/feather_nrf52840_express/board.h | 2 +- .../feather_nrf52840_express/nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/feather_nrf52840_sense/board.h | 2 +- .../feather_nrf52840_sense/nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h | 2 +- .../boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld | 4 +- hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h | 2 +- hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk | 2 +- hw/bsp/nrf/boards/pca10056/board.h | 2 +- hw/bsp/nrf/boards/pca10059/board.h | 2 +- hw/bsp/nrf/boards/pca10100/board.h | 2 +- hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h | 2 +- hw/bsp/nrf/family.c | 2 +- hw/bsp/nutiny_nuc121s/nuc121_flash.ld | 2 +- hw/bsp/nutiny_nuc121s/nutiny_nuc121.c | 2 +- hw/bsp/nutiny_nuc125s/nuc125_flash.ld | 2 +- hw/bsp/nutiny_nuc125s/nutiny_nuc125.c | 2 +- hw/bsp/nutiny_nuc126v/nutiny_nuc126.c | 2 +- hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c | 2 +- hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c | 2 +- hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c | 2 +- hw/bsp/pic32mz/family.c | 2 +- hw/bsp/rp2040/board.h | 2 +- hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake | 2 +- hw/bsp/rp2040/family.cmake | 2 +- hw/bsp/rx/boards/gr_citrus/gr_citrus.c | 6 +- hw/bsp/rx/boards/rx65n_target/rx65n_target.c | 2 +- .../boards/samd11_xplained/samd11d14am_flash.ld | 4 +- hw/bsp/samd21/boards/atsamd21_xpro/board.h | 2 +- .../boards/circuitplayground_express/board.h | 2 +- hw/bsp/samd21/boards/curiosity_nano/board.h | 2 +- hw/bsp/samd21/boards/feather_m0_express/board.h | 2 +- hw/bsp/samd21/boards/itsybitsy_m0/board.h | 2 +- hw/bsp/samd21/boards/luna_d21/board.h | 2 +- hw/bsp/samd21/boards/luna_d21/board.mk | 1 - hw/bsp/samd21/boards/metro_m0_express/board.h | 2 +- hw/bsp/samd21/boards/qtpy/board.h | 2 +- hw/bsp/samd21/boards/seeeduino_xiao/board.h | 2 +- hw/bsp/samd21/boards/trinket_m0/board.h | 1 - hw/bsp/samd21/boards/trinket_m0/board.mk | 1 - hw/bsp/samd21/family.c | 2 +- hw/bsp/samd51/boards/feather_m4_express/board.h | 2 +- hw/bsp/samd51/boards/itsybitsy_m4/board.h | 2 +- hw/bsp/samd51/boards/metro_m4_express/board.h | 2 +- hw/bsp/samd51/boards/metro_m4_express/board.mk | 1 - hw/bsp/samd51/boards/pybadge/board.h | 2 +- hw/bsp/samd51/boards/pyportal/board.h | 2 +- hw/bsp/samd51/family.c | 2 +- hw/bsp/same54xplainedpro/same54p20a_flash.ld | 4 +- hw/bsp/same54xplainedpro/same54p20a_sram.ld | 4 +- hw/bsp/samg55xplained/samg55xplained.c | 2 +- hw/bsp/saml2x/boards/atsaml21_xpro/board.h | 2 +- hw/bsp/saml2x/boards/saml22_feather/board.h | 2 +- .../saml2x/boards/saml22_feather/saml22_feather.ld | 4 +- hw/bsp/saml2x/boards/sensorwatch_m0/board.h | 2 +- .../saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld | 4 +- hw/bsp/saml2x/family.c | 2 +- hw/bsp/sltb009a/sltb009a.c | 4 +- hw/bsp/spresense/board_spresense.c | 6 +- hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h | 2 +- hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk | 2 +- .../stm32f070rbnucleo/stm32F070rbtx_flash.ld | 14 +- .../boards/stm32f072disco/STM32F072RBTx_FLASH.ld | 8 +- hw/bsp/stm32f0/boards/stm32f072disco/board.h | 2 +- hw/bsp/stm32f0/boards/stm32f072eval/board.h | 2 +- hw/bsp/stm32f0/family.c | 2 +- hw/bsp/stm32f0/stm32f0xx_hal_conf.h | 51 +- .../boards/stm32f103_bluepill/STM32F103X8_FLASH.ld | 6 +- hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h | 2 +- .../boards/stm32f103_mini_2/STM32F103XC_FLASH.ld | 6 +- hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h | 2 +- hw/bsp/stm32f1/family.c | 8 +- hw/bsp/stm32f1/stm32f1xx_hal_conf.h | 44 +- hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld | 8 +- hw/bsp/stm32f207nucleo/stm32f207nucleo.c | 4 +- hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h | 56 +- hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld | 18 +- hw/bsp/stm32f303disco/stm32f303disco.c | 2 +- hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h | 38 +- .../feather_stm32f405/STM32F405RGTx_FLASH.ld | 18 +- hw/bsp/stm32f4/boards/feather_stm32f405/board.h | 2 +- .../boards/pyboardv11/STM32F405RGTx_FLASH.ld | 18 +- hw/bsp/stm32f4/boards/pyboardv11/board.h | 2 +- .../stm32f401blackpill/STM32F401VCTx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f401blackpill/board.h | 2 +- .../boards/stm32f401blackpill/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f407disco/STM32F407VGTx_FLASH.ld | 18 +- hw/bsp/stm32f4/boards/stm32f407disco/board.h | 2 +- .../boards/stm32f407disco/stm32f4xx_hal_conf.h | 82 +-- .../stm32f411blackpill/STM32F411CEUx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f411blackpill/board.h | 2 +- .../boards/stm32f411blackpill/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f411disco/STM32F411VETx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f411disco/board.h | 2 +- .../boards/stm32f411disco/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f412disco/STM32F412ZGTx_FLASH.ld | 8 +- hw/bsp/stm32f4/boards/stm32f412disco/board.h | 2 +- .../boards/stm32f412disco/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld | 8 +- .../boards/stm32f412nucleo/stm32f4xx_hal_conf.h | 82 +-- .../boards/stm32f439nucleo/stm32f4xx_hal_conf.h | 70 +-- hw/bsp/stm32f4/family.c | 2 +- hw/bsp/stm32f7/boards/stlinkv3mini/board.h | 2 +- hw/bsp/stm32f7/boards/stm32f723disco/board.h | 2 +- hw/bsp/stm32f7/boards/stm32f746disco/board.h | 2 +- .../boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld | 6 +- hw/bsp/stm32f7/boards/stm32f746nucleo/board.h | 2 +- .../boards/stm32f746nucleo/stm32f7xx_hal_conf.h | 52 +- .../boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld | 8 +- hw/bsp/stm32f7/boards/stm32f767nucleo/board.h | 2 +- hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk | 2 +- .../boards/stm32f767nucleo/stm32f7xx_hal_conf.h | 52 +- hw/bsp/stm32f7/boards/stm32f769disco/board.h | 2 +- .../boards/stm32g474nucleo/STM32G474RETx_FLASH.ld | 8 +- hw/bsp/stm32g4/family.c | 2 +- hw/bsp/stm32g4/stm32g4xx_hal_conf.h | 26 +- hw/bsp/stm32h7/boards/daisyseed/board.mk | 1 - .../boards/daisyseed/stm32h750ibkx_flash.ld | 2 - .../boards/stm32h743eval/stm32h743xx_flash.ld | 8 +- .../boards/stm32h743nucleo/stm32h743xx_flash.ld | 8 +- hw/bsp/stm32h7/boards/stm32h745disco/board.mk | 1 - .../waveshare_openh743i/STM32H743IITX_FLASH.ld | 2 - hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk | 2 +- hw/bsp/stm32h7/family.c | 2 +- hw/bsp/stm32h7/stm32h7xx_hal_conf.h | 6 +- .../boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld | 8 +- hw/bsp/stm32l0/boards/stm32l052dap52/board.h | 34 +- hw/bsp/stm32l0/family.c | 2 +- hw/bsp/stm32l0/stm32l0xx_hal_conf.h | 49 +- hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld | 8 +- hw/bsp/stm32l0538disco/stm32l0538disco.c | 2 +- hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h | 102 ++-- .../boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld | 14 +- hw/bsp/stm32l4/boards/stm32l412nucleo/board.h | 6 +- .../boards/stm32l476disco/STM32L476VGTx_FLASH.ld | 14 +- hw/bsp/stm32l4/boards/stm32l476disco/board.h | 2 +- .../boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld | 12 +- hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h | 2 +- .../boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld | 6 +- hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h | 2 +- hw/bsp/stm32l4/stm32l4xx_hal_conf.h | 10 +- hw/bsp/stm32u5/stm32u5xx_hal_conf.h | 1 - .../stm32wb55nucleo/stm32wb55xx_flash_cm4.ld | 8 +- hw/bsp/stm32wb/family.c | 2 +- hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk | 2 +- hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld | 24 +- hw/bsp/tm4c123/family.c | 1 - hw/bsp/xmc4000/boards/xmc4500_relax/board.h | 2 +- hw/mcu/bridgetek/ft9xx/Readme.md | 4 +- hw/mcu/bridgetek/ft9xx/scripts/crt0.S | 8 +- hw/mcu/dialog/README.md | 4 +- .../da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt | 1 - .../sdk/bsp/include/cmsis_compiler.h | 1 - .../SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h | 10 +- .../SDK_10.0.8.105/sdk/bsp/include/core_cm0.h | 2 +- .../SDK_10.0.8.105/sdk/bsp/include/core_cm33.h | 4 +- .../SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h | 33 +- hw/mcu/dialog/da1469x/da1469x.ld | 1 - hw/mcu/dialog/da1469x/include/mcu/mcu.h | 1 - .../nrf5x/s140_nrf52_6.1.1_API/include/ble.h | 2 +- .../nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h | 2 +- lib/SEGGER_RTT/RTT/SEGGER_RTT.c | 16 +- lib/SEGGER_RTT/RTT/SEGGER_RTT.h | 2 +- lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S | 6 +- lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h | 12 +- lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c | 4 +- lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c | 42 +- lib/fatfs/source/00history.txt | 1 - lib/fatfs/source/00readme.txt | 1 - lib/fatfs/source/diskio.c | 1 - lib/fatfs/source/ff.c | 1 - lib/fatfs/source/ffsystem.c | 1 - lib/networking/dhserver.c | 10 +- lib/networking/dhserver.h | 6 +- lib/networking/dnserver.c | 8 +- lib/networking/dnserver.h | 6 +- lib/networking/ndis.h | 10 +- lib/networking/rndis_protocol.h | 28 +- lib/networking/rndis_reports.c | 14 +- src/class/audio/audio.h | 6 +- src/class/audio/audio_device.c | 6 +- src/class/audio/audio_device.h | 4 +- src/class/bth/bth_device.h | 2 +- src/class/cdc/cdc_device.c | 12 +- src/class/cdc/cdc_device.h | 2 +- src/class/cdc/cdc_host.h | 2 +- src/class/cdc/cdc_rndis.h | 2 +- src/class/cdc/cdc_rndis_host.c | 2 +- src/class/cdc/cdc_rndis_host.h | 2 +- src/class/hid/hid.h | 2 +- src/class/midi/midi.h | 2 +- src/class/midi/midi_device.c | 2 +- src/class/midi/midi_device.h | 2 +- src/class/msc/msc.h | 2 +- src/class/msc/msc_device.h | 2 +- src/class/msc/msc_host.c | 12 +- src/class/msc/msc_host.h | 2 +- src/class/net/ecm_rndis_device.c | 2 +- src/class/net/ncm_device.c | 2 +- src/class/net/net_device.h | 2 +- src/class/usbtmc/usbtmc.h | 1 - src/class/usbtmc/usbtmc_device.c | 4 +- src/class/vendor/vendor_device.h | 2 +- src/class/vendor/vendor_host.c | 2 +- src/class/vendor/vendor_host.h | 2 +- src/class/video/video_device.c | 2 +- src/common/tusb_compiler.h | 4 +- src/common/tusb_timeout.h | 2 +- src/common/tusb_verify.h | 2 +- src/device/dcd.h | 2 +- src/device/usbd.c | 4 +- src/device/usbd_pvt.h | 2 +- src/host/hcd.h | 2 +- src/host/hub.c | 4 +- src/host/usbh.h | 2 +- src/osal/osal.h | 2 +- src/osal/osal_freertos.h | 2 +- src/osal/osal_none.h | 2 +- src/osal/osal_pico.h | 2 +- src/osal/osal_rtx4.h | 4 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 78 +-- src/portable/chipidea/ci_hs/ci_hs_type.h | 2 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 2 +- src/portable/ehci/ehci.c | 6 +- src/portable/espressif/esp32sx/dcd_esp32sx.c | 1 - src/portable/mentor/musb/dcd_musb.c | 8 +- src/portable/mentor/musb/hcd_musb.c | 4 +- src/portable/microchip/pic/dcd_pic.c | 4 +- src/portable/microchip/pic32mz/usbhs_registers.h | 40 +- src/portable/microchip/samg/dcd_samg.c | 2 +- src/portable/microchip/samx7x/common_usb_regs.h | 6 +- src/portable/microchip/samx7x/dcd_samx7x.c | 36 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 2 +- src/portable/nuvoton/nuc120/dcd_nuc120.c | 6 +- src/portable/nuvoton/nuc121/dcd_nuc121.c | 6 +- src/portable/nuvoton/nuc505/dcd_nuc505.c | 6 +- src/portable/nxp/khci/dcd_khci.c | 6 +- src/portable/nxp/khci/hcd_khci.c | 4 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 2 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.h | 2 +- src/portable/nxp/lpc17_40/hcd_lpc17_40.c | 3 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 7 +- .../nxp/transdimension/common_transdimension.h | 2 +- .../nxp/transdimension/dcd_transdimension.c | 2 +- .../nxp/transdimension/hcd_transdimension.c | 2 +- src/portable/ohci/ohci.c | 3 +- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 2 +- src/portable/raspberrypi/rp2040/rp2040_usb.h | 2 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 45 +- src/portable/st/synopsys/synopsys_common.h | 672 ++++++++++----------- src/portable/sunxi/dcd_sunxi_musb.c | 6 +- src/portable/template/dcd_template.c | 2 +- src/portable/valentyusb/eptri/dcd_eptri.c | 2 +- src/portable/valentyusb/eptri/dcd_eptri.h | 2 +- src/portable/wch/ch32v307/dcd_usbhs.c | 8 +- test/fuzz/dcd_fuzz.cc | 4 +- test/fuzz/device/cdc/CMakeLists.txt | 2 +- test/fuzz/device/cdc/src/fuzz.cc | 4 +- test/fuzz/device/msc/CMakeLists.txt | 2 +- test/fuzz/device/msc/src/fuzz.cc | 1 - test/fuzz/device/net/CMakeLists.txt | 2 +- test/fuzz/device/net/src/arch/cc.h | 32 +- test/fuzz/device/net/src/fuzz.cc | 2 +- test/fuzz/device/net/src/lwipopts.h | 28 +- test/fuzz/dicts/cdc.dict | 1 - test/fuzz/make.mk | 3 +- test/fuzz/msc_fuzz.cc | 2 +- test/fuzz/net_fuzz.cc | 2 +- test/fuzz/rules.mk | 6 +- test/unit-test/test/device/msc/test_msc_device.c | 2 +- test/unit-test/test/device/usbd/test_usbd.c | 2 +- test/unit-test/test/test_fifo.c | 2 +- test/unit-test/vendor/ceedling/lib/ceedling.rb | 1 - .../ceedling/lib/ceedling/build_invoker_utils.rb | 14 +- .../vendor/ceedling/lib/ceedling/cacheinator.rb | 10 +- .../ceedling/lib/ceedling/cacheinator_helper.rb | 2 +- .../vendor/ceedling/lib/ceedling/cmock_builder.rb | 8 +- .../vendor/ceedling/lib/ceedling/configurator.rb | 1 - .../ceedling/lib/ceedling/configurator_plugins.rb | 2 +- .../ceedling/lib/ceedling/configurator_setup.rb | 2 +- .../lib/ceedling/configurator_validator.rb | 78 +-- .../vendor/ceedling/lib/ceedling/erb_wrapper.rb | 2 +- .../vendor/ceedling/lib/ceedling/file_finder.rb | 1 - .../ceedling/lib/ceedling/file_finder_helper.rb | 22 +- .../ceedling/lib/ceedling/file_system_utils.rb | 14 +- .../ceedling/lib/ceedling/file_system_wrapper.rb | 2 +- .../vendor/ceedling/lib/ceedling/flaginator.rb | 14 +- .../ceedling/lib/ceedling/generator_helper.rb | 8 +- .../lib/ceedling/generator_test_results.rb | 2 +- .../generator_test_results_sanity_checker.rb | 22 +- .../vendor/ceedling/lib/ceedling/loginator.rb | 6 +- .../vendor/ceedling/lib/ceedling/makefile.rb | 4 +- .../vendor/ceedling/lib/ceedling/objects.yml | 2 +- .../vendor/ceedling/lib/ceedling/par_map.rb | 1 - .../vendor/ceedling/lib/ceedling/plugin.rb | 8 +- .../vendor/ceedling/lib/ceedling/plugin_builder.rb | 4 +- .../ceedling/lib/ceedling/plugin_reportinator.rb | 40 +- .../lib/ceedling/plugin_reportinator_helper.rb | 10 +- .../ceedling/preprocessinator_includes_handler.rb | 2 +- .../lib/ceedling/project_config_manager.rb | 2 +- .../vendor/ceedling/lib/ceedling/rake_utils.rb | 2 +- .../vendor/ceedling/lib/ceedling/reportinator.rb | 4 +- .../vendor/ceedling/lib/ceedling/rules_cmock.rake | 2 +- .../ceedling/lib/ceedling/rules_preprocess.rake | 5 +- .../ceedling/lib/ceedling/rules_release.rake | 1 - .../ceedling/rules_release_deep_dependencies.rake | 3 +- .../vendor/ceedling/lib/ceedling/rules_tests.rake | 1 - .../ceedling/rules_tests_deep_dependencies.rake | 1 - .../vendor/ceedling/lib/ceedling/setupinator.rb | 8 +- .../vendor/ceedling/lib/ceedling/stream_wrapper.rb | 2 +- .../vendor/ceedling/lib/ceedling/streaminator.rb | 2 +- .../ceedling/lib/ceedling/streaminator_helper.rb | 2 +- .../vendor/ceedling/lib/ceedling/system_utils.rb | 6 +- .../vendor/ceedling/lib/ceedling/task_invoker.rb | 20 +- .../vendor/ceedling/lib/ceedling/tasks_base.rake | 1 - .../ceedling/lib/ceedling/tasks_filesystem.rake | 2 - .../ceedling/lib/ceedling/tasks_release.rake | 11 +- .../vendor/ceedling/lib/ceedling/tasks_tests.rake | 1 - .../ceedling/lib/ceedling/test_invoker_helper.rb | 8 +- .../vendor/ceedling/plugins/beep/lib/beep.rb | 1 - .../vendor/ceedling/plugins/bullseye/README.md | 2 +- .../ceedling/plugins/bullseye/assets/template.erb | 1 - .../ceedling/plugins/bullseye/lib/bullseye.rb | 26 +- .../ceedling/plugins/colour_report/README.md | 2 +- .../plugins/command_hooks/lib/command_hooks.rb | 1 - .../plugins/compile_commands_json/README.md | 2 +- .../plugins/fake_function_framework/Rakefile | 2 +- .../examples/fff_example/project.yml | 2 +- .../examples/fff_example/src/display.c | 2 +- .../lib/fff_mock_generator.rb | 2 +- .../spec/fff_mock_header_generator_spec.rb | 2 +- .../spec/fff_mock_source_generator_spec.rb | 2 +- .../spec/header_generator.rb | 2 +- .../fake_function_framework/src/fff_unity_helper.h | 2 +- .../ceedling/plugins/gcov/assets/template.erb | 1 - .../plugins/gcov/lib/reportinator_helper.rb | 2 +- .../ceedling/plugins/json_tests_report/README.md | 4 +- .../json_tests_report/lib/json_tests_report.rb | 4 +- .../ceedling/plugins/module_generator/README.md | 4 +- .../module_generator/config/module_generator.yml | 2 +- .../stdout_gtestlike_tests_report/README.md | 4 +- .../plugins/stdout_ide_tests_report/README.md | 2 +- .../plugins/stdout_pretty_tests_report/README.md | 2 +- .../stdout_pretty_tests_report/assets/template.erb | 1 - .../lib/stdout_pretty_tests_report.rb | 8 +- .../vendor/ceedling/plugins/subprojects/README.md | 14 +- .../ceedling/plugins/subprojects/subprojects.rake | 3 +- .../plugins/teamcity_tests_report/README.md | 2 +- .../ceedling/vendor/c_exception/lib/CException.c | 1 - .../ceedling/vendor/c_exception/lib/meson.build | 2 +- .../vendor/ceedling/vendor/cmock/src/cmock.c | 1 - .../vendor/ceedling/vendor/cmock/src/meson.build | 2 +- .../vendor/ceedling/vendor/diy/lib/diy.rb | 60 +- .../vendor/ceedling/vendor/diy/lib/diy/factory.rb | 5 +- .../ceedling/vendor/unity/auto/generate_config.yml | 2 +- .../vendor/ceedling/vendor/unity/src/meson.build | 2 +- tools/build_board.py | 2 +- tools/build_utils.py | 2 +- tools/iar_template.ipcf | 2 +- tools/mksunxi.py | 2 +- tools/pcapng_to_corpus.py | 10 +- tools/usb_drivers/tinyusb_win_usbser.inf | 2 +- 581 files changed, 2553 insertions(+), 2694 deletions(-) (limited to 'examples/device') diff --git a/.gitattributes b/.gitattributes index 2342decc3..140ae8929 100644 --- a/.gitattributes +++ b/.gitattributes @@ -1,10 +1,10 @@ # Set the default behavior, in case people don't have core.autocrlf set. * text=auto -*.c text -*.cpp text +*.c text +*.cpp text *.h text -*.icf text +*.icf text *.js text *.json text *.ld text diff --git a/.github/ISSUE_TEMPLATE/bug_report.yml b/.github/ISSUE_TEMPLATE/bug_report.yml index 8c39b95e1..dc5f0ee16 100644 --- a/.github/ISSUE_TEMPLATE/bug_report.yml +++ b/.github/ISSUE_TEMPLATE/bug_report.yml @@ -54,7 +54,7 @@ body: Exact steps in chronological order, details should be specific e.g if you use a command/script to test with, please post it as well. 1. Go to '...' 2. Click on '....' - 3. See error + 3. See error validations: required: true @@ -63,9 +63,9 @@ body: label: Debug Log as txt file placeholder: | Attach your debug log txt file here, where the issue occurred, best with comments to explain the actual events. - + Note1: Please DO NOT paste your lengthy log contents here since it hurts the readability. - Note2: To enable logging, add `LOG=3` to to the make command if building with stock examples or set `CFG_TUSB_DEBUG=3` in your tusb_config.h. + Note2: To enable logging, add `LOG=3` to to the make command if building with stock examples or set `CFG_TUSB_DEBUG=3` in your tusb_config.h. More information can be found at [example's readme](https://github.com/hathach/tinyusb/blob/master/docs/getting_started.md) validations: required: false diff --git a/.github/workflows/trigger.yml b/.github/workflows/trigger.yml index 11e58d86c..86c699dac 100644 --- a/.github/workflows/trigger.yml +++ b/.github/workflows/trigger.yml @@ -43,7 +43,7 @@ jobs: if [ -n "$(git status --porcelain)" ]; then git add . git commit --message "Update from https://github.com/$GITHUB_REPOSITORY/commit/$GITHUB_SHA" - git push + git push fi - name: Create tinyusb_src Release @@ -53,7 +53,7 @@ jobs: cd tinyusb_src git tag ${{ github.event.release.tag_name }} git push origin ${{ github.event.release.tag_name }} - + # Send POST reqwuest to release https://docs.github.com/en/rest/reference/repos#create-a-release bb="For release note, please checkout https://github.com/hathach/tinyusb/releases/tag/${{ github.event.release.tag_name }}" curl -X POST -H "Authorization: token ${{ secrets.API_TOKEN_GITHUB }}" -H "Accept: application/vnd.github.v3+json" --data '{"tag_name": "${{ github.event.release.tag_name }}", "name": "${{ github.event.release.name }}", "body": "$bb", "draft": ${{ github.event.release.draft }}, "prerelease": ${{ github.event.release.prerelease }}}' https://api.github.com/repos/hathach/tinyusb_src/releases diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml index ea2372f07..976f04e63 100644 --- a/.pre-commit-config.yaml +++ b/.pre-commit-config.yaml @@ -13,11 +13,11 @@ repos: - repo: local hooks: - - id: codespell - name: codespell - entry: codespell - types_or: [c, header] - language: system + #- id: codespell + # name: codespell + # entry: codespell + # types_or: [c, header] + # language: system - id: unit-test name: unit-test diff --git a/.readthedocs.yaml b/.readthedocs.yaml index e83cd90fd..1421b397a 100644 --- a/.readthedocs.yaml +++ b/.readthedocs.yaml @@ -15,4 +15,3 @@ python: submodules: include: [] recursive: false - \ No newline at end of file diff --git a/docs/assets/stack.svg b/docs/assets/stack.svg index 85fe35e96..ed46c8649 100644 --- a/docs/assets/stack.svg +++ b/docs/assets/stack.svg @@ -1 +1 @@ - \ No newline at end of file + diff --git a/docs/contributing/code_of_conduct.rst b/docs/contributing/code_of_conduct.rst index b52bf14c5..82627099f 120000 --- a/docs/contributing/code_of_conduct.rst +++ b/docs/contributing/code_of_conduct.rst @@ -1 +1 @@ -../../CODE_OF_CONDUCT.rst \ No newline at end of file +../../CODE_OF_CONDUCT.rst diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index 451e3dace..ca715cb58 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -15,7 +15,7 @@ Changelog - Fix tu_fifo memory overflown when repeatedly write to overwritable fifo (accumulated more than 2 depths) - Better support for IAR (ARM) with ci build check for stm32 mcus. - Fix Windows build for some mingw gnu make situations - + Controller Driver (DCD & HCD) ----------------------------- @@ -27,7 +27,7 @@ Controller Driver (DCD & HCD) - Fix endpoint internal state when closed - Fix reception of large ISO packets -- [rp2040] +- [rp2040] - [dcd] Implement workaround for Errata 15. This enable SOF when bulk-in endpoint is in use and reduce its bandwidth to only 80% - [hcd] Fix shared irq slots filling up when hcd_init() is called multiple times @@ -51,7 +51,7 @@ Device Stack - Support port name strings - fix MS Header wTotalLength computation - + - [HID] - Add FIDO descriptor template @@ -60,7 +60,7 @@ Device Stack - [CDC] - Fix autoflush for FIFO < MPS - - Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data + - Fix tx fifo memory overflown when DTR is not set and tud_cdc_write() is called repeatedly with large enough data - [USBTMC] Fix packet size with highspeed @@ -100,14 +100,14 @@ Controller Driver (DCD & HCD) - Fix overwrite with grstctl when disable endpoint - [EHCI] Fix an issue with EHCI driver - [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0 -- [nrf5x] Fix DMA access race condition using atomic function +- [nrf5x] Fix DMA access race condition using atomic function - [pic32] Fix PIC32 santiy - [rp2040] - Add PICO-PIO-USB as controller (device/host) support for rp2040 - Use shared IRQ handlers, so user can also hook the USB IRQ - Fix resumed signal not reported to device stack -- [stm32fsdev] Add support for stm32wb55 +- [stm32fsdev] Add support for stm32wb55 Device Stack ------------ @@ -159,7 +159,7 @@ Controller Driver (DCD & HCD) - [F1C100s] Add new DCD for Allwinner F1C100s family - [PIC32MZ] Add new DCD for PIC32MZ - [nRF] Fix/Enhance various race condition with: EASY DMA, request HFXO, EPOUT -- [ChipIdea] rename Transdimension to more popular ChipIdea Highspeed, +- [ChipIdea] rename Transdimension to more popular ChipIdea Highspeed, - [RP2040] various update/fix for hcd/dcd - [FT9XX] new DCD port for Bridgetek FT90x and FT93x devices - [DA1469X] Fix resume @@ -246,7 +246,7 @@ RP2040 ^^^^^^ - Add RP2040 suspend & resume support -- Implement double buffer for both host and device (#891). However device EPOUT is still single buffered due to techinical issue with short packet +- Implement double buffer for both host and device (#891). However device EPOUT is still single buffered due to techinical issue with short packet Device Stack ------------ @@ -267,7 +267,7 @@ DFU ^^^ - Enhance DFU implementation to support multiple alternate interface and better support bwPollTimeout -- Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU +- Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU HID ^^^ @@ -287,7 +287,7 @@ UAC2 ^^^^ - Fix bug and enhance of UAC2 - + Vendor ^^^^^^ @@ -479,7 +479,7 @@ Host Controller Driver (HCD) - Move echi/ohci files to portable/ - Rename hcd_lpc18_43 to hcd_transdimension - Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr() - + - Update NXP transdimention hcd_init() to reset controller to host mode - Ported hcd to rt10xx @@ -529,13 +529,13 @@ Device Controller Driver - ESP32-S2: - Add bus suspend and wakeup support - + - SAMD21: - Fix (walkaround) samd21 setup_packet overflow by USB DMA - + - STM32 Synopsys: - Rework USB FIFO allocation scheme and allow RX FIFO size reduction - + - Sony CXD56 - Update Update Spresense SDK to 2.0.2 - Fix dcd issues with setup packets @@ -554,17 +554,17 @@ USB Device - CDC - Allow to transmit data, even if the host does not support control line states i.e set DTR - + - HID - change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64 - + - MIDI - Fix midi sysex sending bug - + - MSC - Invoke only scsi complete callback after status transaction is complete. - Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error. - + - USBTMC - Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu @@ -614,20 +614,20 @@ Device Controller Driver - Fix FIFO flush during stall - Implement dcd_edpt_close() API - Support F105, F107 - + - Enhance STM32 fsdev - Improve dcd fifo allocation - Fix ISTR race condition - Support remap USB IRQ on supported MCUs - Implement dcd_edpt_close() API - + - Enhance NUC 505: enhance set configure behavior - Enhance SAMD - Fix race condition with setup packet - Add SAMD11 option `OPT_MCU_SAMD11` - Add SAME5x option `OPT_MCU_SAME5X` - + - Fix SAMG control data toggle and stall race condition - Enhance nRF @@ -659,7 +659,7 @@ USB Device - `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver - Add application implemented class driver via `usbd_app_driver_get_cb()` - IAD is handled to assign driver id - + - Added `tud_descriptor_device_qualifier_cb()` callback - Optimize `tu_fifo` bulk write/read transfer - Forward non-std control request to class driver @@ -675,12 +675,12 @@ USB Device - Send zero length packet for end of data when needed - Add `tud_cdc_tx_complete_cb()` callback - Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo - + - MIDI: - Add packet interface - Add multiple jack descriptors - Fix MIDI driver for sysex - + - DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request - Rename some configure macro to make it clear that those are used directly for endpoint transfer @@ -688,7 +688,7 @@ USB Device - CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE - CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE - CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE - + - HID: - Fix gamepad template descriptor - Add multiple HID interface API @@ -700,7 +700,7 @@ USB Host - Rework USB host stack (still work in progress) - Fix compile error with pipehandle - Rework usbh control and enumeration as non-blocking - + - Improve Hub, MSC, HID host driver Examples @@ -713,7 +713,7 @@ Examples - Enhance `net_lwip_webserver` example - Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both) - Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver - + - Added new Audio example: audio_test uac2_headsest New Boards diff --git a/docs/info/contributors.rst b/docs/info/contributors.rst index b3748ccb5..02608919f 120000 --- a/docs/info/contributors.rst +++ b/docs/info/contributors.rst @@ -1 +1 @@ -../../CONTRIBUTORS.rst \ No newline at end of file +../../CONTRIBUTORS.rst diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index e328757ba..ef4a6ba61 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -44,18 +44,18 @@ For your convenience, TinyUSB contains a handful of examples for both host and d $ git clone https://github.com/hathach/tinyusb tinyusb $ cd tinyusb -Some TinyUSB examples also requires external submodule libraries in ``/lib`` such as FreeRTOS, Lightweight IP to build. Run following command to fetch them +Some TinyUSB examples also requires external submodule libraries in ``/lib`` such as FreeRTOS, Lightweight IP to build. Run following command to fetch them .. code-block:: $ git submodule update --init lib -Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. +Some ports will also require a port-specific SDK (e.g. RP2040) or binary (e.g. Sony Spresense) to build examples. They are out of scope for tinyusb, you should download/install it first according to its manufacturer guide. Build ^^^^^ -To build example, first change directory to an example folder. +To build example, first change directory to an example folder. .. code-block:: @@ -118,7 +118,7 @@ To compile for debugging add ``DEBUG=1``\ , for example Log ~~~ -Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. LOG=1 will only print out error message, LOG=2 print more information with on-going events. LOG=3 or higher is not used yet. +Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional ``LOG=``. LOG=1 will only print out error message, LOG=2 print more information with on-going events. LOG=3 or higher is not used yet. .. code-block:: @@ -127,7 +127,7 @@ Should you have an issue running example and/or submitting an bug report. You co Logger ~~~~~~ -By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: +By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: * `LOGGER=rtt`: use `Segger RTT protocol `_ @@ -178,12 +178,12 @@ IAR Project Connection files are provided to import TinyUSB stack into your proj * Take example of STM32F0: - + - You need `stm32l0xx.h`, `startup_stm32f0xx.s`, `system_stm32f0xx.c`. - `STM32L0xx_HAL_Driver` is only needed to run examples, TinyUSB stack itself doesn't rely on MCU's SDKs. -* Open `Tools -> Configure Custom Argument Variables` (Switch to `Global` tab if you want to do it for all your projects) +* Open `Tools -> Configure Custom Argument Variables` (Switch to `Global` tab if you want to do it for all your projects) Click `New Group ...`, name it to `TUSB`, Click `Add Variable ...`, name it to `TUSB_DIR`, change it's value to the path of your TinyUSB stack, for example `C:\\tinyusb` diff --git a/examples/device/audio_4_channel_mic/skip.txt b/examples/device/audio_4_channel_mic/skip.txt index ae9b57f1f..1ee86a485 100644 --- a/examples/device/audio_4_channel_mic/skip.txt +++ b/examples/device/audio_4_channel_mic/skip.txt @@ -1,3 +1,3 @@ mcu:SAMD11 mcu:SAME5X -mcu:SAMG \ No newline at end of file +mcu:SAMG diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index a6af5fd19..26d8c48c5 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber diff --git a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py index 9ab15135d..8312b4e28 100644 --- a/examples/device/audio_4_channel_mic/src/plot_audio_samples.py +++ b/examples/device/audio_4_channel_mic/src/plot_audio_samples.py @@ -31,4 +31,3 @@ if __name__ == '__main__': plt.ylabel('Amplitude') plt.title('MicNode 4 Channel') plt.show() - \ No newline at end of file diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 8929f3057..8bf9eebc4 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index cb321f9a8..f6e10e2ea 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_test/skip.txt b/examples/device/audio_test/skip.txt index ae9b57f1f..1ee86a485 100644 --- a/examples/device/audio_test/skip.txt +++ b/examples/device/audio_test/skip.txt @@ -1,3 +1,3 @@ mcu:SAMD11 mcu:SAME5X -mcu:SAMG \ No newline at end of file +mcu:SAMG diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 56961e427..f9cc63cdd 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber diff --git a/examples/device/audio_test/src/plot_audio_samples.py b/examples/device/audio_test/src/plot_audio_samples.py index 2303df3d0..1504684a6 100644 --- a/examples/device/audio_test/src/plot_audio_samples.py +++ b/examples/device/audio_test/src/plot_audio_samples.py @@ -32,7 +32,6 @@ if __name__ == '__main__': plt.ylabel('Amplitude') plt.title('MicNode') plt.show() - + samples = np.array(myrecording) np.savetxt('Output.csv', samples, delimiter=",", fmt='%s') - \ No newline at end of file diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index da3e203d7..891e90802 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt index cb321f9a8..f6e10e2ea 100644 --- a/examples/device/audio_test_multi_rate/CMakeLists.txt +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_test_multi_rate/skip.txt b/examples/device/audio_test_multi_rate/skip.txt index ae9b57f1f..1ee86a485 100644 --- a/examples/device/audio_test_multi_rate/skip.txt +++ b/examples/device/audio_test_multi_rate/skip.txt @@ -1,3 +1,3 @@ mcu:SAMD11 mcu:SAME5X -mcu:SAMG \ No newline at end of file +mcu:SAMG diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 0e11a509b..4dd53dd34 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber @@ -165,7 +165,7 @@ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_reque (void)rhport; //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); - + // Clear buffer when streaming format is changed if(alt != 0) { @@ -257,7 +257,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * return false; } } - + // Clock Source unit if ( entityID == UAC2_ENTITY_CLOCK ) { @@ -279,7 +279,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * return false; } } - + return false; // Yet not implemented } @@ -491,7 +491,7 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin pData_32[cnt] = (uint32_t)startVal++ << 16U; } } - + return true; } diff --git a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py index 4a5f15a9c..c92e49957 100644 --- a/examples/device/audio_test_multi_rate/src/plot_audio_samples.py +++ b/examples/device/audio_test_multi_rate/src/plot_audio_samples.py @@ -32,7 +32,6 @@ if __name__ == '__main__': plt.ylabel('Amplitude') plt.title('MicNode') plt.show() - + samples = np.array(myrecording) np.savetxt('Output.csv', samples, delimiter=",", fmt='%s') - \ No newline at end of file diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index d8b6511d6..1c8288bce 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -111,7 +111,7 @@ extern "C" { // How many formats are used, need to adjust USB descriptor if changed #define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 - + // 16bit in 16bit slots #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index 92e791a72..276bf8aa0 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index 77e2fe6c1..8d8a03e49 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 HiFiPhile @@ -99,4 +99,4 @@ TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) -#endif \ No newline at end of file +#endif diff --git a/examples/device/board_test/src/CMakeLists.txt b/examples/device/board_test/src/CMakeLists.txt index e4e1f4e9a..37625f441 100644 --- a/examples/device/board_test/src/CMakeLists.txt +++ b/examples/device/board_test/src/CMakeLists.txt @@ -2,7 +2,7 @@ idf_component_register(SRCS "main.c" INCLUDE_DIRS "." REQUIRES freertos soc) - + file(TO_NATIVE_PATH "${TOP}/hw/bsp/${FAMILY}/boards/${BOARD}/board.cmake" board_cmake) if(EXISTS ${board_cmake}) diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index 0289ca15f..e8e393717 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 0264f0566..c0296191b 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 4eb8c7c27..8be404cc9 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/cdc_msc/skip.txt b/examples/device/cdc_msc/skip.txt index d844feae8..eadb6e74a 100644 --- a/examples/device/cdc_msc/skip.txt +++ b/examples/device/cdc_msc/skip.txt @@ -1 +1 @@ -mcu:SAMD11 \ No newline at end of file +mcu:SAMD11 diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index c83299e59..207dd728c 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index e67e381ce..f8f37a577 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 6b59ed50f..44c849277 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index cfb14aa2b..0e8a24d02 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index a895f4738..707c8d578 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 30a712275..822442724 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index bd9a91c27..4ec2fa31d 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/dynamic_configuration/skip.txt b/examples/device/dynamic_configuration/skip.txt index d844feae8..eadb6e74a 100644 --- a/examples/device/dynamic_configuration/skip.txt +++ b/examples/device/dynamic_configuration/skip.txt @@ -1 +1 @@ -mcu:SAMD11 \ No newline at end of file +mcu:SAMD11 diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 33a603343..90794e979 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index e8cb03fdd..27856a1a4 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 092229b99..0590bd679 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/hid_boot_interface/Makefile b/examples/device/hid_boot_interface/Makefile index d58a539e8..b3f2cc588 100644 --- a/examples/device/hid_boot_interface/Makefile +++ b/examples/device/hid_boot_interface/Makefile @@ -8,7 +8,7 @@ INC += \ EXAMPLE_SOURCE = \ src/main.c \ src/usb_descriptors.c - + SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) include ../../rules.mk diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index b13428041..1a155996a 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index a0d7e9f15..10345ab41 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.h b/examples/device/hid_boot_interface/src/usb_descriptors.h index 57cf0e2c0..6fee9e223 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.h +++ b/examples/device/hid_boot_interface/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 05315f266..4edb045c2 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index 2988baee2..347bbf29a 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite/src/usb_descriptors.h b/examples/device/hid_composite/src/usb_descriptors.h index ca8925ad9..e733d31dd 100644 --- a/examples/device/hid_composite/src/usb_descriptors.h +++ b/examples/device/hid_composite/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 7c9619c4b..ca02af100 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 4df12d3db..30f327d5e 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.h b/examples/device/hid_composite_freertos/src/usb_descriptors.h index ca8925ad9..e733d31dd 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.h +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/hid_generic_inout/hid_test.js b/examples/device/hid_generic_inout/hid_test.js index daa958fd5..16bc723e2 100644 --- a/examples/device/hid_generic_inout/hid_test.js +++ b/examples/device/hid_generic_inout/hid_test.js @@ -48,7 +48,7 @@ if( deviceInfo ) { function anySupportedBoard(d) { - + for (var key in boards) { if (boards.hasOwnProperty(key)) { if (isDevice(boards[key],d)) { @@ -65,4 +65,3 @@ function isDevice(board,d){ // product id 0xff is matches all return d.vendorId==board[0] && (d.productId==board[1] || board[1] == 0xFFFF); } - diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 5b7daf118..6649b49b5 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index cd4838407..8377a0f47 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 3310348bd..66fa72063 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index c84a873b1..4845dcf57 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 9e834ae21..9188ab06c 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/msc_dual_lun/skip.txt b/examples/device/msc_dual_lun/skip.txt index 3549c702a..47e561cf0 100644 --- a/examples/device/msc_dual_lun/skip.txt +++ b/examples/device/msc_dual_lun/skip.txt @@ -1,2 +1,2 @@ mcu:SAMD11 -mcu:MKL25ZXX \ No newline at end of file +mcu:MKL25ZXX diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 96790d20c..0a7284939 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index 2b773b43b..b1047acdb 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index d8dbb5ce3..2de81111c 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 9fe1a325e..5f1e37931 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -80,4 +80,4 @@ if (EXISTS ${TOP}/lib/lwip/src) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) -endif() \ No newline at end of file +endif() diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 68761b058..b0e5235ac 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -7,4 +7,4 @@ mcu:STM32L0 mcu:MKL25ZXX family:broadcom_64bit family:broadcom_32bit -board:curiosity_nano \ No newline at end of file +board:curiosity_nano diff --git a/examples/device/net_lwip_webserver/src/arch/cc.h b/examples/device/net_lwip_webserver/src/arch/cc.h index 56a0cacf7..9f30b91cb 100644 --- a/examples/device/net_lwip_webserver/src/arch/cc.h +++ b/examples/device/net_lwip_webserver/src/arch/cc.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Adam Dunkels * */ @@ -42,7 +42,7 @@ typedef int sys_prot_t; #if defined (__ICCARM__) #define PACK_STRUCT_BEGIN -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x #define PACK_STRUCT_USE_INCLUDES @@ -50,7 +50,7 @@ typedef int sys_prot_t; #elif defined (__CC_ARM) #define PACK_STRUCT_BEGIN __packed -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x diff --git a/examples/device/net_lwip_webserver/src/lwipopts.h b/examples/device/net_lwip_webserver/src/lwipopts.h index a215017c7..336c9243d 100644 --- a/examples/device/net_lwip_webserver/src/lwipopts.h +++ b/examples/device/net_lwip_webserver/src/lwipopts.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Simon Goldschmidt * */ diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 33b4d38b6..88081ffe2 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Peter Lawrence @@ -39,7 +39,7 @@ and likely their manufacturer has not tested such functionality. Some code work The smartphone may only have an ECM driver, but refuse to automatically pick ECM (unlike the OSes above); try modifying ./examples/devices/net_lwip_webserver/usb_descriptors.c so that CONFIG_ID_ECM is default. -The smartphone may be artificially picky about which Ethernet MAC address to recognize; if this happens, +The smartphone may be artificially picky about which Ethernet MAC address to recognize; if this happens, try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00 (clearing bit 1). */ @@ -170,7 +170,7 @@ bool dns_query_proc(const char *name, ip4_addr_t *addr) bool tud_network_recv_cb(const uint8_t *src, uint16_t size) { - /* this shouldn't happen, but if we get another packet before + /* this shouldn't happen, but if we get another packet before parsing the previous, we must signal our inability to accept it */ if (received_frame) return false; diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index bee51790a..3c0ed3db7 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -77,7 +77,7 @@ tusb_desc_device_t const desc_device = .bDeviceClass = TUSB_CLASS_MISC, .bDeviceSubClass = MISC_SUBCLASS_COMMON, .bDeviceProtocol = MISC_PROTOCOL_IAD, - + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, .idVendor = 0xCafe, diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 01707d51b..bafd40d34 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg @@ -176,7 +176,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t rangef.subrange[i].bRes = 0; TU_LOG1("Range %d (%d, %d, %d)\r\n", i, (int)rangef.subrange[i].bMin, (int)rangef.subrange[i].bMax, (int)rangef.subrange[i].bRes); } - + return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &rangef, sizeof(rangef)); } } diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 07c86b903..0a0b4c602 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Ha Thach (tinyusb.org) diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 342b4fac1..5525c916a 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenbreg diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index c49603c26..b4678dc5e 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 6945d8743..da7f0418a 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/usbtmc/visaQuery.py b/examples/device/usbtmc/visaQuery.py index c4e5ad2b9..ca65daf97 100644 --- a/examples/device/usbtmc/visaQuery.py +++ b/examples/device/usbtmc/visaQuery.py @@ -36,8 +36,8 @@ def test_trig(): time.sleep(0.3) # SRQ may have some delay assert (inst.read_stb() & 0x40), "SRQ not set after 0.3 seconds" assert (inst.read_stb() == 0) - - + + def test_mav(): inst.write("delay 50") inst.read_stb() # clear STB @@ -45,15 +45,15 @@ def test_mav(): inst.write("123") time.sleep(0.3) assert (inst.read_stb() & 0x10), "MAV not set after 0.5 seconds" - + rsp = inst.read() assert(rsp == "123\r\n") - - + + def test_srq(): assert (inst.read_stb() == 0) inst.write("123") - + #inst.enable_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE) #waitrsp = inst.wait_on_event(pyvisa.constants.VI_EVENT_SERVICE_REQ, 5000) #inst.discard_events(pyvisa.constants.VI_EVENT_SERVICE_REQ, pyvisa.constants.VI_QUEUE) @@ -64,7 +64,7 @@ def test_srq(): assert (stb == 0x50),msg assert (inst.read_stb() == 0x10), "SRQ set at second read!" - + rsp = inst.read() assert(rsp == "123\r\n") @@ -110,7 +110,7 @@ def test_abort_in(): inst.timeout = 800 y = inst.read() assert(y == "xxx\r\n") - + def test_indicate(): # perform indicator pulse usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM) @@ -120,8 +120,8 @@ def test_indicate(): assert(retv == b'\x01') else: assert((retv[1] == pyvisa.constants.StatusCode(0)) and (retv[0] == b'\x01')), f"indicator pulse failed: retv={retv}" - - + + def test_multi_read(): old_chunk_size = inst.chunk_size longstr = "0123456789abcdefghijklmnopqrstuvwxyz" * 10 @@ -133,7 +133,7 @@ def test_multi_read(): y = inst.read() assert (x + "\r\n" == y) #inst.chunk_size = old_chunk_size - + def test_stall_ep0(): usb_iface = inst.get_visa_attribute(pyvisa.constants.VI_ATTR_USB_INTFC_NUM) inst.read_stb() @@ -143,7 +143,7 @@ def test_stall_ep0(): assert(False) except pyvisa.VisaIOError: pass - + assert (inst.read_stb() == 0) @@ -153,7 +153,7 @@ print(reslist) if (len(reslist) == 0): sys.exit() - + inst = rm.open_resource(reslist[0]); inst.timeout = 3000 diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index b92a2b804..f1ef247e1 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -31,4 +31,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 3ceebe821..08db1b00f 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index 0cf772010..af18d15d1 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/video_capture/src/usb_descriptors.h b/examples/device/video_capture/src/usb_descriptors.h index f1ed3c8e9..93f148a82 100644 --- a/examples/device/video_capture/src/usb_descriptors.h +++ b/examples/device/video_capture/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenbreg diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index abc4d91da..acaa54198 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -25,4 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 604d30a83..24456f9f3 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 99f5caaf9..b2593001c 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/device/webusb_serial/src/usb_descriptors.h b/examples/device/webusb_serial/src/usb_descriptors.h index 19f1ff3f3..a1c4a2cf1 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.h +++ b/examples/device/webusb_serial/src/usb_descriptors.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index bd7870274..817c63c70 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index 6b0a89127..63b6bc603 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 51cab2de0..bb7fa850e 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index b34810252..23312296f 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index 797d55f8a..e9c9676b8 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -68,4 +68,3 @@ void tuh_msc_umount_cb(uint8_t dev_addr) (void) dev_addr; printf("A MassStorage device is unmounted\r\n"); } - diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 299a3ff10..3380e9246 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index ab2cfd498..40c88a7d3 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index eef28fe12..003e2865b 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/examples/rules.mk b/examples/rules.mk index f8e4001ec..56ad89fd0 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -283,4 +283,4 @@ copy-artifact: $(BIN) # Print out the value of a make variable. # https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile print-%: - @echo $* = $($*) \ No newline at end of file + @echo $* = $($*) diff --git a/hw/bsp/ansi_escape.h b/hw/bsp/ansi_escape.h index 6e62ee20a..15af2f3ab 100644 --- a/hw/bsp/ansi_escape.h +++ b/hw/bsp/ansi_escape.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 14858c2b6..e715bdf2e 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/board.h b/hw/bsp/board.h index 0a10294d0..036556731 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk index 52e9e45c4..77811d18d 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk @@ -2,4 +2,4 @@ CFLAGS += -mcpu=arm1176jzf-s \ -DBCM_VERSION=2835 \ -DCFG_TUSB_MCU=OPT_MCU_BCM2835 -SUFFIX = +SUFFIX = diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index f7a11fb49..42ad4b666 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index f7a11fb49..42ad4b666 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 3b6b03904..f812c922f 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2021 Bridgetek Pte Ltd @@ -70,7 +70,7 @@ void board_init(void) board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG)); #ifdef BOARD_GPIO_LED - gpio_function(BOARD_GPIO_LED, pad_func_0); + gpio_function(BOARD_GPIO_LED, pad_func_0); gpio_idrive(BOARD_GPIO_LED, pad_drive_12mA); gpio_dir(BOARD_GPIO_LED, pad_dir_output); #endif @@ -233,7 +233,7 @@ int board_uart_write(void const *buf, int len) uint32_t board_millis(void) { uint32_t safe_ms; - + CRITICAL_SECTION_BEGIN safe_ms = timer_ms; CRITICAL_SECTION_END @@ -254,4 +254,3 @@ void chip_reboot(void) dbg_memory_copy(0xfe, 0, 0, 255); #endif } - diff --git a/hw/bsp/brtmm90x/family.mk b/hw/bsp/brtmm90x/family.mk index 0ddf47a3a..6df0bfdfe 100644 --- a/hw/bsp/brtmm90x/family.mk +++ b/hw/bsp/brtmm90x/family.mk @@ -5,7 +5,7 @@ SKIP_NANOLIB = 1 # Set to use FT90X prebuilt libraries. FT9XX_PREBUILT_LIBS = 0 ifeq ($(FT9XX_PREBUILT_LIBS),1) -# If the FT90X toolchain is installed on Windows systems then the SDK +# If the FT90X toolchain is installed on Windows systems then the SDK # include files and prebuilt libraries are at: %FT90X_TOOLCHAIN%/hardware FT9XX_SDK = $(FT90X_TOOLCHAIN)/hardware INC += "$(FT9XX_SDK)/include" @@ -21,7 +21,7 @@ endif # Add include files which are within the TinyUSB directory structure. INC += \ - $(TOP)/$(BOARD_PATH) + $(TOP)/$(BOARD_PATH) # Add required C Compiler flags for FT90X. CFLAGS += \ @@ -30,7 +30,7 @@ CFLAGS += \ -fvar-tracking-assignments \ -fmessage-length=0 \ -ffunction-sections \ - -DCFG_TUSB_MCU=OPT_MCU_FT90X + -DCFG_TUSB_MCU=OPT_MCU_FT90X # Maximum USB device speed supported by the board CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED @@ -45,7 +45,7 @@ LDFLAGS += $(addprefix -L,$(LDINC)) \ -Wl,-lc # Additional Source files for FT90X. -SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c +SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c # Linker library. ifneq ($(FT9XX_PREBUILT_LIBS),1) diff --git a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h index 0eab34916..7b488096e 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h +++ b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2023 Ha Thach (tinyusb.org) for Adafruit Industries diff --git a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c index 45fc9e3aa..db3551ca7 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c +++ b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c @@ -36,7 +36,7 @@ static unsigned int tx_produce; static volatile unsigned int tx_consume; void USART1_IRQHandler(void) __attribute__((naked)); -void USART1_IRQHandler(void) { +void USART1_IRQHandler(void) { __asm volatile ("call USART1_IRQHandler_impl; mret"); } @@ -57,7 +57,7 @@ __attribute__((used)) void USART1_IRQHandler_impl(void) void uart_write(char c) { unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; - + NVIC_DisableIRQ(USART1_IRQn); if((tx_consume != tx_produce) || (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)) { tx_buf[tx_produce] = c; diff --git a/hw/bsp/ch32v307/ch32v307.ld b/hw/bsp/ch32v307/ch32v307.ld index af7c06615..55bd10cd0 100644 --- a/hw/bsp/ch32v307/ch32v307.ld +++ b/hw/bsp/ch32v307/ch32v307.ld @@ -41,7 +41,7 @@ SECTIONS *(.glue_7t) *(.gnu.linkonce.t.*) . = ALIGN(4); - } >FLASH AT>FLASH + } >FLASH AT>FLASH .fini : { @@ -50,31 +50,31 @@ SECTIONS } >FLASH AT>FLASH PROVIDE( _etext = . ); - PROVIDE( _eitcm = . ); + PROVIDE( _eitcm = . ); .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .ctors : { /* gcc uses crtbegin.o to find the start of @@ -95,8 +95,8 @@ SECTIONS KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .dtors : { KEEP (*crtbegin.o(.dtors)) @@ -104,17 +104,17 @@ SECTIONS KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) - } >FLASH AT>FLASH + } >FLASH AT>FLASH .dalign : { . = ALIGN(4); PROVIDE(_data_vma = .); - } >RAM AT>FLASH + } >RAM AT>FLASH .dlalign : { - . = ALIGN(4); + . = ALIGN(4); PROVIDE(_data_lma = .); } >FLASH AT>FLASH @@ -145,7 +145,7 @@ SECTIONS *(.sbss*) *(.gnu.linkonce.sb.*) *(.bss*) - *(.gnu.linkonce.b.*) + *(.gnu.linkonce.b.*) *(COMMON*) . = ALIGN(4); PROVIDE( _ebss = .); @@ -156,15 +156,12 @@ SECTIONS .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : { - PROVIDE( _heap_end = . ); + PROVIDE( _heap_end = . ); . = ALIGN(4); PROVIDE(_susrstack = . ); . = . + __stack_size; PROVIDE( _eusrstack = .); __freertos_irq_stack_top = .; - } >RAM + } >RAM } - - - diff --git a/hw/bsp/ch32v307/ch32v30x_conf.h b/hw/bsp/ch32v307/ch32v30x_conf.h index 399feaf68..0b86ad390 100644 --- a/hw/bsp/ch32v307/ch32v30x_conf.h +++ b/hw/bsp/ch32v307/ch32v30x_conf.h @@ -6,7 +6,7 @@ * Description : Library configuration file. * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 -*******************************************************************************/ +*******************************************************************************/ #ifndef __CH32V30x_CONF_H #define __CH32V30x_CONF_H @@ -36,8 +36,3 @@ #endif /* __CH32V30x_CONF_H */ - - - - - diff --git a/hw/bsp/ch32v307/ch32v30x_it.c b/hw/bsp/ch32v307/ch32v30x_it.c index d348dd989..c329c5613 100644 --- a/hw/bsp/ch32v307/ch32v30x_it.c +++ b/hw/bsp/ch32v307/ch32v30x_it.c @@ -45,5 +45,3 @@ __attribute__((used)) void HardFault_Handler_impl(void) { } } - - diff --git a/hw/bsp/ch32v307/ch32v30x_it.h b/hw/bsp/ch32v307/ch32v30x_it.h index 42f285edf..f3977a8be 100644 --- a/hw/bsp/ch32v307/ch32v30x_it.h +++ b/hw/bsp/ch32v307/ch32v30x_it.h @@ -14,5 +14,3 @@ #endif /* __CH32V30x_IT_H */ - - diff --git a/hw/bsp/ch32v307/core_riscv.h b/hw/bsp/ch32v307/core_riscv.h index 2e94ec683..a7ce10a00 100644 --- a/hw/bsp/ch32v307/core_riscv.h +++ b/hw/bsp/ch32v307/core_riscv.h @@ -336,7 +336,7 @@ RV_STATIC_INLINE void NVIC_SystemReset(void) } -/* Core_Exported_Functions */ +/* Core_Exported_Functions */ extern uint32_t __get_FFLAGS(void); extern void __set_FFLAGS(uint32_t value); extern uint32_t __get_FRM(void); @@ -377,8 +377,3 @@ extern uint32_t __get_SP(void); #endif - - - - - diff --git a/hw/bsp/ch32v307/system_ch32v30x.c b/hw/bsp/ch32v307/system_ch32v30x.c index 12b18d7b8..23f783df4 100644 --- a/hw/bsp/ch32v307/system_ch32v30x.c +++ b/hw/bsp/ch32v307/system_ch32v30x.c @@ -8,17 +8,17 @@ * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 *********************************************************************************/ -#include "ch32v30x.h" +#include "ch32v30x.h" -/* -* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after +/* +* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after * reset the HSI is used as SYSCLK source). -* If none of the define below is enabled, the HSI is used as System clock source. +* If none of the define below is enabled, the HSI is used as System clock source. */ // #define SYSCLK_FREQ_HSE HSE_VALUE -/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ //#define SYSCLK_FREQ_48MHz 48000000 -/* #define SYSCLK_FREQ_56MHz 56000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ //#define SYSCLK_FREQ_72MHz 72000000 //#define SYSCLK_FREQ_96MHz 96000000 //#define SYSCLK_FREQ_120MHz 120000000 @@ -60,7 +60,7 @@ static void SetSysClock(void); #elif defined SYSCLK_FREQ_48MHz static void SetSysClockTo48(void); #elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); + static void SetSysClockTo56(void); #elif defined SYSCLK_FREQ_72MHz static void SetSysClockTo72(void); @@ -90,7 +90,7 @@ void SystemInit (void) RCC->CFGR0 &= (uint32_t)0xF8FF0000; #else RCC->CFGR0 &= (uint32_t)0xF0FF0000; -#endif +#endif RCC->CTLR &= (uint32_t)0xFEF6FFFF; RCC->CTLR &= (uint32_t)0xFFFBFFFF; @@ -101,8 +101,8 @@ void SystemInit (void) RCC->INTR = 0x00FF0000; RCC->CFGR2 = 0x00000000; #else - RCC->INTR = 0x009F0000; -#endif + RCC->INTR = 0x009F0000; +#endif SetSysClock(); } @@ -118,18 +118,18 @@ void SystemCoreClockUpdate (void) uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0; tmp = RCC->CFGR0 & RCC_SWS; - + switch (tmp) { case 0x00: SystemCoreClock = HSI_VALUE; break; - case 0x04: + case 0x04: SystemCoreClock = HSE_VALUE; break; - case 0x08: + case 0x08: pllmull = RCC->CFGR0 & RCC_PLLMULL; - pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllsource = RCC->CFGR0 & RCC_PLLSRC; pllmull = ( pllmull >> 18) + 2; #ifdef CH32V30x_D8 @@ -149,7 +149,7 @@ void SystemCoreClockUpdate (void) SystemCoreClock = (HSI_VALUE >> 1) * pllmull; } else - { + { if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) { SystemCoreClock = (HSE_VALUE >> 1) * pllmull; @@ -167,9 +167,9 @@ void SystemCoreClockUpdate (void) SystemCoreClock = HSI_VALUE; break; } - + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; - SystemCoreClock >>= tmp; + SystemCoreClock >>= tmp; } /********************************************************************* @@ -188,7 +188,7 @@ static void SetSysClock(void) #elif defined SYSCLK_FREQ_48MHz SetSysClockTo48(); #elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); + SetSysClockTo56(); #elif defined SYSCLK_FREQ_72MHz SetSysClockTo72(); #elif defined SYSCLK_FREQ_96MHz @@ -199,9 +199,9 @@ static void SetSysClock(void) SetSysClockTo144(); #endif - + /* If none of the define above is enabled, the HSI is used as System clock - * source (default after reset) + * source (default after reset) */ } @@ -218,14 +218,14 @@ static void SetSysClock(void) static void SetSysClockToHSE(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -235,20 +235,20 @@ static void SetSysClockToHSE(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; - + /* Select HSE as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; /* Wait till HSE is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) @@ -256,11 +256,11 @@ static void SetSysClockToHSE(void) } } else - { + { /* If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_24MHz @@ -275,14 +275,14 @@ static void SetSysClockToHSE(void) static void SetSysClockTo24(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -292,13 +292,13 @@ static void SetSysClockTo24(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; @@ -318,18 +318,18 @@ static void SetSysClockTo24(void) } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_48MHz @@ -344,14 +344,14 @@ static void SetSysClockTo24(void) static void SetSysClockTo48(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - + + RCC->CTLR |= ((uint32_t)RCC_HSEON); /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -361,14 +361,14 @@ static void SetSysClockTo48(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; @@ -389,19 +389,19 @@ static void SetSysClockTo48(void) } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_56MHz @@ -416,14 +416,14 @@ static void SetSysClockTo48(void) static void SetSysClockTo56(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -433,17 +433,17 @@ static void SetSysClockTo56(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; - + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); @@ -462,19 +462,19 @@ static void SetSysClockTo56(void) /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_72MHz @@ -489,14 +489,14 @@ static void SetSysClockTo56(void) static void SetSysClockTo72(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -506,17 +506,17 @@ static void SetSysClockTo72(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; - + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); @@ -532,20 +532,20 @@ static void SetSysClockTo72(void) /* Wait till PLL is ready */ while((RCC->CTLR & RCC_PLLRDY) == 0) { - } + } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ } } diff --git a/hw/bsp/ch32v307/system_ch32v30x.h b/hw/bsp/ch32v307/system_ch32v30x.h index 0e0ef4e51..ad81058c7 100644 --- a/hw/bsp/ch32v307/system_ch32v30x.h +++ b/hw/bsp/ch32v307/system_ch32v30x.h @@ -7,16 +7,16 @@ * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 *******************************************************************************/ -#ifndef __SYSTEM_CH32V30x_H +#ifndef __SYSTEM_CH32V30x_H #define __SYSTEM_CH32V30x_H #ifdef __cplusplus extern "C" { -#endif +#endif extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ -/* System_Exported_Functions */ +/* System_Exported_Functions */ extern void SystemInit(void); extern void SystemCoreClockUpdate(void); @@ -25,6 +25,3 @@ extern void SystemCoreClockUpdate(void); #endif #endif /*__CH32V30x_SYSTEM_H */ - - - diff --git a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c index a4d996810..3abb488f2 100644 --- a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c +++ b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/hw/bsp/da14695_dk_usb/da1469x.ld b/hw/bsp/da14695_dk_usb/da1469x.ld index 96507d6e7..8cc1d9d99 100644 --- a/hw/bsp/da14695_dk_usb/da1469x.ld +++ b/hw/bsp/da14695_dk_usb/da1469x.ld @@ -242,4 +242,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c index 13113fb95..abe7f54cb 100644 --- a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c +++ b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/hw/bsp/da1469x_dk_pro/da1469x.ld b/hw/bsp/da1469x_dk_pro/da1469x.ld index 96507d6e7..8cc1d9d99 100644 --- a/hw/bsp/da1469x_dk_pro/da1469x.ld +++ b/hw/bsp/da1469x_dk_pro/da1469x.ld @@ -242,4 +242,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/bsp/ea4088qs/ea4088qs.c b/hw/bsp/ea4088qs/ea4088qs.c index 7150ed393..ace72fef0 100644 --- a/hw/bsp/ea4088qs/ea4088qs.c +++ b/hw/bsp/ea4088qs/ea4088qs.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ea4088qs/lpc4088.ld b/hw/bsp/ea4088qs/lpc4088.ld index 4b1cddd6e..5897707f6 100644 --- a/hw/bsp/ea4088qs/lpc4088.ld +++ b/hw/bsp/ea4088qs/lpc4088.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ - RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ + RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ - __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ - __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ + __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ + __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamPeriph32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamPeriph32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamPeriph32 + } > RamPeriph32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamPeriph32*) . = ALIGN(4) ; - } > RamPeriph32 + } > RamPeriph32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc64 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc64 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index f88d3b89e..68bcaa123 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ea4357/lpc4357.ld b/hw/bsp/ea4357/lpc4357.ld index 14a0df328..e3dfbfda1 100644 --- a/hw/bsp/ea4357/lpc4357.ld +++ b/hw/bsp/ea4357/lpc4357.ld @@ -11,44 +11,44 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ - __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ - __base_Flash = 0x1a000000 ; /* Flash */ - __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ - __base_Flash2 = 0x1b000000 ; /* Flash2 */ - __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ + __base_Flash = 0x1a000000 ; /* Flash */ + __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ + __base_Flash2 = 0x1b000000 ; /* Flash2 */ + __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -119,9 +119,9 @@ SECTIONS } > MFlashA512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlashA512 @@ -135,7 +135,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -216,7 +216,7 @@ SECTIONS *(.bss.$RamLoc40*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 + } > RamLoc40 /* BSS section for RamAHB32 */ .bss_RAM3 : ALIGN(4) @@ -226,7 +226,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 + } > RamAHB32 /* BSS section for RamAHB16 */ .bss_RAM4 : ALIGN(4) @@ -236,7 +236,7 @@ SECTIONS *(.bss.$RamAHB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 + } > RamAHB16 /* BSS section for RamAHB_ETB16 */ .bss_RAM5 : ALIGN(4) @@ -246,7 +246,7 @@ SECTIONS *(.bss.$RamAHB_ETB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -265,7 +265,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamLoc40*) . = ALIGN(4) ; - } > RamLoc40 + } > RamLoc40 /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -273,7 +273,7 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* NOINIT section for RamAHB16 */ .noinit_RAM4 (NOLOAD) : ALIGN(4) @@ -281,7 +281,7 @@ SECTIONS *(.noinit.$RAM4*) *(.noinit.$RamAHB16*) . = ALIGN(4) ; - } > RamAHB16 + } > RamAHB16 /* NOINIT section for RamAHB_ETB16 */ .noinit_RAM5 (NOLOAD) : ALIGN(4) @@ -289,13 +289,13 @@ SECTIONS *(.noinit.$RAM5*) *(.noinit.$RamAHB_ETB16*) . = ALIGN(4) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -303,11 +303,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -321,4 +321,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/ea4357/pca9532.c b/hw/bsp/ea4357/pca9532.c index eae3805c2..150167cde 100644 --- a/hw/bsp/ea4357/pca9532.c +++ b/hw/bsp/ea4357/pca9532.c @@ -57,7 +57,7 @@ static uint16_t ledStateShadow = 0; * Local Functions *****************************************************************************/ -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) +static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) { I2CM_XFER_T i2cData; @@ -75,7 +75,7 @@ static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) return SUCCESS; } -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) +static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) { I2CM_XFER_T i2cData; @@ -181,7 +181,7 @@ uint16_t pca9532_getLedState (uint32_t shadow) * A blinking LED may be reported as on or off depending on * its state when reading the Input register. */ - + buf[0] = PCA9532_INPUT0; I2CWrite(PCA9532_I2C_ADDR, buf, 1); diff --git a/hw/bsp/ea4357/pca9532.h b/hw/bsp/ea4357/pca9532.h index 7a7c6e145..f21c1ff09 100644 --- a/hw/bsp/ea4357/pca9532.h +++ b/hw/bsp/ea4357/pca9532.h @@ -48,7 +48,7 @@ #define KEY_MASK 0x000F /* - * MMC Card Detect and MMC Write Protect are mapped to LED4 + * MMC Card Detect and MMC Write Protect are mapped to LED4 * and LED5 on the PCA9532. Please note that WP is active low. */ diff --git a/hw/bsp/esp32s2/boards/CMakeLists.txt b/hw/bsp/esp32s2/boards/CMakeLists.txt index c3c687a70..ff90acbde 100644 --- a/hw/bsp/esp32s2/boards/CMakeLists.txt +++ b/hw/bsp/esp32s2/boards/CMakeLists.txt @@ -8,5 +8,5 @@ include("${BOARD}/board.cmake") target_include_directories(${COMPONENT_TARGET} PUBLIC "${TOP}/hw" - "${TOP}/src" + "${TOP}/src" ) diff --git a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake index d33962676..e39ceb887 100644 --- a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h index 43e00901d..1f8dc2cea 100644 --- a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake index d33962676..e39ceb887 100644 --- a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h index 16e30b685..084a7aaf2 100644 --- a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h index 49a2474bc..2ec80ef47 100644 --- a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/esp32s2.c b/hw/bsp/esp32s2/boards/esp32s2.c index a7ca82deb..015d8305b 100644 --- a/hw/bsp/esp32s2/boards/esp32s2.c +++ b/hw/bsp/esp32s2/boards/esp32s2.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -150,4 +150,3 @@ int board_uart_write(void const * buf, int len) (void) buf; (void) len; return 0; } - diff --git a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake +++ b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h index 6bb44f76d..0acb9c439 100644 --- a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h +++ b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake b/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake +++ b/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/espressif_saola_1/board.h b/hw/bsp/esp32s2/boards/espressif_saola_1/board.h index f450b9a8b..e068efef9 100644 --- a/hw/bsp/esp32s2/boards/espressif_saola_1/board.h +++ b/hw/bsp/esp32s2/boards/espressif_saola_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt b/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt index 6d0fcbc86..8266c5a1c 100644 --- a/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt +++ b/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt @@ -5,4 +5,3 @@ idf_component_register(SRCS "${component_srcs}" PRIV_INCLUDE_DIRS "" PRIV_REQUIRES "driver" REQUIRES "") - diff --git a/hw/bsp/esp32s2/family.cmake b/hw/bsp/esp32s2/family.cmake index f3d41d041..0973adcac 100644 --- a/hw/bsp/esp32s2/family.cmake +++ b/hw/bsp/esp32s2/family.cmake @@ -1,7 +1,7 @@ cmake_minimum_required(VERSION 3.5) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s2) set(FAMILY_MCUS ESP32S2) diff --git a/hw/bsp/esp32s2/family.mk b/hw/bsp/esp32s2/family.mk index b95098e15..fba0f038b 100644 --- a/hw/bsp/esp32s2/family.mk +++ b/hw/bsp/esp32s2/family.mk @@ -21,4 +21,3 @@ UF2_FAMILY_ID = 0xbfdd4eee $(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin @echo CREATE $@ $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/hw/bsp/esp32s3/boards/CMakeLists.txt b/hw/bsp/esp32s3/boards/CMakeLists.txt index e1b921ae9..311c6e900 100644 --- a/hw/bsp/esp32s3/boards/CMakeLists.txt +++ b/hw/bsp/esp32s3/boards/CMakeLists.txt @@ -10,5 +10,5 @@ idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PAT target_include_directories(${COMPONENT_TARGET} PUBLIC "${FREERTOS_ORIG_INCLUDE_PATH}" "${TOP}/hw" - "${TOP}/src" + "${TOP}/src" ) diff --git a/hw/bsp/esp32s3/boards/esp32s3.c b/hw/bsp/esp32s3/boards/esp32s3.c index a7ca82deb..015d8305b 100644 --- a/hw/bsp/esp32s3/boards/esp32s3.c +++ b/hw/bsp/esp32s3/boards/esp32s3.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -150,4 +150,3 @@ int board_uart_write(void const * buf, int len) (void) buf; (void) len; return 0; } - diff --git a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_addax_1/board.h b/hw/bsp/esp32s3/boards/espressif_addax_1/board.h index fff24ba44..d4690f732 100644 --- a/hw/bsp/esp32s3/boards/espressif_addax_1/board.h +++ b/hw/bsp/esp32s3/boards/espressif_addax_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h index c7940c56e..fe33b5c43 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -) \ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h index c7940c56e..fe33b5c43 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt b/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt index 6d0fcbc86..8266c5a1c 100644 --- a/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt +++ b/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt @@ -5,4 +5,3 @@ idf_component_register(SRCS "${component_srcs}" PRIV_INCLUDE_DIRS "" PRIV_REQUIRES "driver" REQUIRES "") - diff --git a/hw/bsp/esp32s3/family.cmake b/hw/bsp/esp32s3/family.cmake index 511dd58bb..0bcad035e 100644 --- a/hw/bsp/esp32s3/family.cmake +++ b/hw/bsp/esp32s3/family.cmake @@ -1,7 +1,7 @@ cmake_minimum_required(VERSION 3.5) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s3) set(FAMILY_MCUS ESP32S3) diff --git a/hw/bsp/esp32s3/family.mk b/hw/bsp/esp32s3/family.mk index cf153ffc2..d82a1c969 100644 --- a/hw/bsp/esp32s3/family.mk +++ b/hw/bsp/esp32s3/family.mk @@ -23,4 +23,3 @@ UF2_FAMILY_ID = 0xc47e5767 $(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin @echo CREATE $@ $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/hw/bsp/f1c100s/README.md b/hw/bsp/f1c100s/README.md index 4aa1e153b..f7a863c34 100644 --- a/hw/bsp/f1c100s/README.md +++ b/hw/bsp/f1c100s/README.md @@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re ## TODO -* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?) \ No newline at end of file +* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?) diff --git a/hw/bsp/f1c100s/board.h b/hw/bsp/f1c100s/board.h index 238ac796d..0ef9a1700 100644 --- a/hw/bsp/f1c100s/board.h +++ b/hw/bsp/f1c100s/board.h @@ -1 +1 @@ -// Nothing valuable here \ No newline at end of file +// Nothing valuable here diff --git a/hw/bsp/f1c100s/board.mk b/hw/bsp/f1c100s/board.mk index 5fe26a9ea..9062483b0 100644 --- a/hw/bsp/f1c100s/board.mk +++ b/hw/bsp/f1c100s/board.mk @@ -32,7 +32,7 @@ SRC_C += \ $(MCU_DIR)/machine/sys-spi-flash.c \ $(MCU_DIR)/machine/f1c100s-intc.c \ $(MCU_DIR)/lib/malloc.c \ - $(MCU_DIR)/lib/printf.c + $(MCU_DIR)/lib/printf.c SRC_S += \ $(MCU_DIR)/machine/start.S \ @@ -47,6 +47,6 @@ INC += \ flash: flash-xfel exec: $(BUILD)/$(PROJECT).bin - xfel ddr + xfel ddr xfel write 0x80000000 $< - xfel exec 0x80000000 \ No newline at end of file + xfel exec 0x80000000 diff --git a/hw/bsp/f1c100s/f1c100s.c b/hw/bsp/f1c100s/f1c100s.c index d45072ecb..5dcae33f7 100644 --- a/hw/bsp/f1c100s/f1c100s.c +++ b/hw/bsp/f1c100s/f1c100s.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -125,6 +125,6 @@ static void timer_init(void) { f1c100s_intc_set_isr(F1C100S_IRQ_TIMER0, timer_handler); f1c100s_intc_enable_irq(F1C100S_IRQ_TIMER0); } -#else +#else static void timer_init(void) { } #endif diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 601cd54f5..08bb20bc3 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -139,4 +139,4 @@ if (NOT TARGET _family_support_marker) # save it in case of re-inclusion set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") -endif() \ No newline at end of file +endif() diff --git a/hw/bsp/fomu/boards/fomu/board.mk b/hw/bsp/fomu/boards/fomu/board.mk index 8ced11412..b5545c89a 100644 --- a/hw/bsp/fomu/boards/fomu/board.mk +++ b/hw/bsp/fomu/boards/fomu/board.mk @@ -1 +1 @@ -# place holder \ No newline at end of file +# place holder diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c index 33c630303..e079e7c5b 100644 --- a/hw/bsp/fomu/fomu.c +++ b/hw/bsp/fomu/fomu.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/fomu/include/hw/common.h b/hw/bsp/fomu/include/hw/common.h index 6a97ca2e9..b902bc4f2 100644 --- a/hw/bsp/fomu/include/hw/common.h +++ b/hw/bsp/fomu/include/hw/common.h @@ -30,4 +30,4 @@ static inline uint32_t csr_readl(uint32_t addr) { return *(volatile uint32_t *)addr; } -#endif /* _HW_COMMON_H_ */ \ No newline at end of file +#endif /* _HW_COMMON_H_ */ diff --git a/hw/bsp/fomu/include/irq.h b/hw/bsp/fomu/include/irq.h index a82218907..dc96c228d 100644 --- a/hw/bsp/fomu/include/irq.h +++ b/hw/bsp/fomu/include/irq.h @@ -68,4 +68,4 @@ static inline unsigned int irq_pending(void) } #endif -#endif /* __IRQ_H */ \ No newline at end of file +#endif /* __IRQ_H */ diff --git a/hw/bsp/frdm_k32l2b/board.h b/hw/bsp/frdm_k32l2b/board.h index 825367915..8d21fdcd4 100644 --- a/hw/bsp/frdm_k32l2b/board.h +++ b/hw/bsp/frdm_k32l2b/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/frdm_k32l2b/frdm_k32l2b.c index 924bb18e9..8d2b39500 100644 --- a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c +++ b/hw/bsp/frdm_k32l2b/frdm_k32l2b.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -56,10 +56,10 @@ void board_init(void) gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, kPORT_MuxAsGpio }; PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); @@ -68,7 +68,7 @@ void board_init(void) PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); /* PORTA2 (pin 24) is configured as LPUART0_TX */ PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); - + SIM->SOPT5 = ((SIM->SOPT5 & /* Mask bits to zero which are setting */ (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) diff --git a/hw/bsp/frdm_kl25z/frdm_kl25z.c b/hw/bsp/frdm_kl25z/frdm_kl25z.c index 8d93fdbaa..46f85f6a5 100644 --- a/hw/bsp/frdm_kl25z/frdm_kl25z.c +++ b/hw/bsp/frdm_kl25z/frdm_kl25z.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -103,7 +103,7 @@ void board_init(void) // Button CLOCK_EnableClock(BUTTON_PIN_CLOCK); port_pin_config_t button_port = { - .pullSelect = kPORT_PullUp, + .pullSelect = kPORT_PullUp, .mux = BUTTON_PIN_FUNCTION, }; PORT_SetPinConfig(BUTTON_PIN_PORT, BUTTON_PIN, &button_port); diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 60a326d27..113c4c304 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -44,7 +44,7 @@ void USBFS_IRQHandler(void) { tud_int_handler(0); } // According to GD32VF103 user manual clock tree: // Systick clock = AHB clock / 4. -#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) +#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) #define BUTTON_PORT GPIOA #define BUTTON_PIN GPIO_PIN_0 diff --git a/hw/bsp/gd32vf103/system_gd32vf103.c b/hw/bsp/gd32vf103/system_gd32vf103.c index c2001a980..200852abf 100644 --- a/hw/bsp/gd32vf103/system_gd32vf103.c +++ b/hw/bsp/gd32vf103/system_gd32vf103.c @@ -95,7 +95,7 @@ void SystemInit(void) /* reset the RCC clock configuration to the default reset state */ /* enable IRC8M */ RCU_CTL |= RCU_CTL_IRC8MEN; - + /* reset SCS, AHBPSC, APB1PSC, APB2PSC, ADCPSC, CKOUT0SEL bits */ RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | RCU_CFG0_ADCPSC | RCU_CFG0_ADCPSC_2 | RCU_CFG0_CKOUT0SEL); @@ -107,7 +107,7 @@ void SystemInit(void) RCU_CTL &= ~(RCU_CTL_HXTALBPS); /* reset PLLSEL, PREDV0_LSB, PLLMF, USBFSPSC bits */ - + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0_LSB | RCU_CFG0_PLLMF | RCU_CFG0_USBFSPSC | RCU_CFG0_PLLMF_4); RCU_CFG1 = 0x00000000U; @@ -141,12 +141,12 @@ void SystemCoreClockUpdate(void) case SEL_IRC8M: SystemCoreClock = IRC8M_VALUE; break; - + /* HXTAL is selected as CK_SYS */ case SEL_HXTAL: SystemCoreClock = HXTAL_VALUE; break; - + /* PLL is selected as CK_SYS */ case SEL_PLL: /* PLL clock source selection, HXTAL or IRC8M/2 */ @@ -313,7 +313,7 @@ static void system_clock_72m_hxtal(void) /* APB1 = AHB/2 */ RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; - /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ + /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL18); diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 7fa2f8541..3c172ebb9 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld index 30dd84373..960fc6891 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld +++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld @@ -35,7 +35,7 @@ MEMORY { m_flash_config (RX) : ORIGIN = 0x60000400, LENGTH = 0x00000C00 m_ivt (RX) : ORIGIN = 0x60001000, LENGTH = 0x00001000 - + m_interrupts (RX) : ORIGIN = 0x6000C000, LENGTH = 0x00000400 m_text (RX) : ORIGIN = 0x6000C400, LENGTH = (8*1024*1024 - 0xC400) m_qacode (RX) : ORIGIN = 0x00000000, LENGTH = 0x00008000 diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index 4f21b52fa..926f45618 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h index 932ce7fd7..10d9fad07 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index 56ed5855b..284bb08e7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index 152c9ab18..9100072e2 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 0472f608c..beb69bf2b 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 7fa37e33f..0f45f72e1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h index 5f51e91a2..37ad94eef 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h index b3cc0a8c5..cac773442 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.h +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_40/board.mk b/hw/bsp/imxrt/boards/teensy_40/board.mk index 0ad5ea5c0..45ca0fb6e 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.mk +++ b/hw/bsp/imxrt/boards/teensy_40/board.mk @@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062 JLINK_DEVICE = MIMXRT1062xxx6A # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH +# Make sure it is in your PATH flash: $(BUILD)/$(PROJECT).hex teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h index b0b4931c7..72c18f540 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.h +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_41/board.mk b/hw/bsp/imxrt/boards/teensy_41/board.mk index 0ad5ea5c0..45ca0fb6e 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.mk +++ b/hw/bsp/imxrt/boards/teensy_41/board.mk @@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062 JLINK_DEVICE = MIMXRT1062xxx6A # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH +# Make sure it is in your PATH flash: $(BUILD)/$(PROJECT).hex teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index e28a6174a..5eb672c24 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld index 5420ffc00..f478a99c7 100644 --- a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld +++ b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld @@ -214,4 +214,3 @@ SECTIONS ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") } - diff --git a/hw/bsp/kuiic/board.h b/hw/bsp/kuiic/board.h index 78ad83a2e..1e2d4f18b 100644 --- a/hw/bsp/kuiic/board.h +++ b/hw/bsp/kuiic/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/kuiic/kuiic.c b/hw/bsp/kuiic/kuiic.c index 7aaa9e03c..97677d47a 100644 --- a/hw/bsp/kuiic/kuiic.c +++ b/hw/bsp/kuiic/kuiic.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -96,10 +96,10 @@ void board_init(void) CLOCK_EnableClock(kCLOCK_PortD); CLOCK_EnableClock(kCLOCK_PortE); - + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 1 }; GPIO_PinInit(GPIOA, 1U, &led_config); - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); + PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); led_config.outputLogic = 0; GPIO_PinInit(GPIOA, 2U, &led_config); PORT_SetPinMux(PORTA, 2U, kPORT_MuxAsGpio); @@ -108,10 +108,10 @@ void board_init(void) gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, kPORT_MuxAsGpio }; PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); @@ -121,7 +121,7 @@ void board_init(void) PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); /* PORTA2 (pin 24) is configured as LPUART0_TX */ PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); - + SIM->SOPT5 = ((SIM->SOPT5 & /* Mask bits to zero which are setting */ (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) diff --git a/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld b/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld index 6dd12ade1..d8079717e 100644 --- a/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld +++ b/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld @@ -13,29 +13,29 @@ MEMORY { /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ - Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ - Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ + Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ + Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ - __base_RAM = 0x2000000 ; /* RAM */ - __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ - __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ - __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ - __base_RAM2 = 0x2004000 ; /* RAM2 */ - __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ - __base_RAM3 = 0x2008000 ; /* RAM3 */ - __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ - __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ + __base_RAM = 0x2000000 ; /* RAM */ + __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ + __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ + __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ + __base_RAM2 = 0x2004000 ; /* RAM2 */ + __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ + __base_RAM3 = 0x2008000 ; /* RAM3 */ + __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ + __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ ENTRY(ResetISR) @@ -84,9 +84,9 @@ SECTIONS } > MFlash256 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash256 @@ -98,9 +98,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > MFlash256 __exidx_end = .; - + _etext = .; - + /* DATA section for Ram1_16 */ .data_RAM2 : ALIGN(4) @@ -225,11 +225,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_16 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -243,4 +243,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c index 7f5984a3e..30a3e51e1 100644 --- a/hw/bsp/lpc15/family.c +++ b/hw/bsp/lpc15/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld index 51fd1539d..f12c1760c 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -12,43 +12,43 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -137,9 +137,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) __exidx_end = .; } > MFlashA512 - + _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -377,17 +377,17 @@ SECTIONS . = ALIGN(4) ; _end_noinit = .; PROVIDE(__end_noinit_RAM = .) ; - PROVIDE(__end_noinit_RamLoc32 = .) ; + PROVIDE(__end_noinit_RamLoc32 = .) ; } > RamLoc32 AT> RamLoc32 PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -401,4 +401,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 9a308e342..9a67e8946 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -11,44 +11,44 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ -__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -118,9 +118,9 @@ SECTIONS } > MFlashA512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlashA512 @@ -134,7 +134,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -215,7 +215,7 @@ SECTIONS *(.bss.$RamLoc40*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 + } > RamLoc40 /* BSS section for RamAHB32 */ .bss_RAM3 : ALIGN(4) @@ -225,7 +225,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 + } > RamAHB32 /* BSS section for RamAHB16 */ .bss_RAM4 : ALIGN(4) @@ -235,7 +235,7 @@ SECTIONS *(.bss.$RamAHB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 + } > RamAHB16 /* BSS section for RamAHB_ETB16 */ .bss_RAM5 : ALIGN(4) @@ -245,7 +245,7 @@ SECTIONS *(.bss.$RamAHB_ETB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -264,7 +264,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamLoc40*) . = ALIGN(4) ; - } > RamLoc40 + } > RamLoc40 /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -272,7 +272,7 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* NOINIT section for RamAHB16 */ .noinit_RAM4 (NOLOAD) : ALIGN(4) @@ -280,7 +280,7 @@ SECTIONS *(.noinit.$RAM4*) *(.noinit.$RamAHB16*) . = ALIGN(4) ; - } > RamAHB16 + } > RamAHB16 /* NOINIT section for RamAHB_ETB16 */ .noinit_RAM5 (NOLOAD) : ALIGN(4) @@ -288,13 +288,13 @@ SECTIONS *(.noinit.$RAM5*) *(.noinit.$RamAHB_ETB16*) . = ALIGN(4) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -302,11 +302,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -320,4 +320,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 72c20e034..57f9d55da 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk index 925374cc8..5f15e2bbe 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk @@ -15,4 +15,4 @@ PYOCD_TARGET = LPC54628 #flash: flash-pyocd -flash: flash-jlink \ No newline at end of file +flash: flash-jlink diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 621788948..fe9cfcc47 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld b/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld index 6b5d852aa..e2197b972 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld +++ b/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld @@ -231,4 +231,3 @@ SECTIONS ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") } - diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 5b6c56dd3..3ed00e7da 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso11u37/lpc11u37.ld b/hw/bsp/lpcxpresso11u37/lpc11u37.ld index 6a2dfb7f5..8e0a4e4c6 100644 --- a/hw/bsp/lpcxpresso11u37/lpc11u37.ld +++ b/hw/bsp/lpcxpresso11u37/lpc11u37.ld @@ -12,24 +12,24 @@ MEMORY { /* Define each memory region */ - MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash128 = 0x0 ; /* MFlash128 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ - __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_MFlash128 = 0x0 ; /* MFlash128 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ + __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -74,9 +74,9 @@ SECTIONS } > MFlash128 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash128 @@ -88,9 +88,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > MFlash128 __exidx_end = .; - + _etext = .; - + /* DATA section for RamUsb2 */ .data_RAM2 : ALIGN(4) @@ -176,11 +176,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) ) ); @@ -192,4 +192,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c b/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c index 11f1797a2..79cd685c3 100644 --- a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c +++ b/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso11u68/lpc11u68.ld b/hw/bsp/lpcxpresso11u68/lpc11u68.ld index 56d9e4b89..4a35b192e 100644 --- a/hw/bsp/lpcxpresso11u68/lpc11u68.ld +++ b/hw/bsp/lpcxpresso11u68/lpc11u68.ld @@ -11,29 +11,29 @@ MEMORY { /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ - __base_RAM3 = 0x20004000 ; /* RAM3 */ - __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ + __base_RAM3 = 0x20004000 ; /* RAM3 */ + __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -82,9 +82,9 @@ SECTIONS } > MFlash256 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash256 @@ -98,7 +98,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* possible MTB section for Ram1_2 */ .mtb_buffer_RAM2 (NOLOAD) : { @@ -172,7 +172,7 @@ SECTIONS *(.bss.$Ram1_2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > Ram1_2 + } > Ram1_2 /* BSS section for Ram2USB_2 */ .bss_RAM3 : ALIGN(4) @@ -182,7 +182,7 @@ SECTIONS *(.bss.$Ram2USB_2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > Ram2USB_2 + } > Ram2USB_2 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -201,7 +201,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$Ram1_2*) . = ALIGN(4) ; - } > Ram1_2 + } > Ram1_2 /* NOINIT section for Ram2USB_2 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -209,13 +209,13 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$Ram2USB_2*) . = ALIGN(4) ; - } > Ram2USB_2 + } > Ram2USB_2 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > Ram0_32 @@ -223,11 +223,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) ) ); @@ -239,4 +239,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c b/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c index e33a5c6e5..a04e43867 100644 --- a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c +++ b/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso1347/lpc1347.ld b/hw/bsp/lpcxpresso1347/lpc1347.ld index 42a4bb25c..a2111cd1c 100644 --- a/hw/bsp/lpcxpresso1347/lpc1347.ld +++ b/hw/bsp/lpcxpresso1347/lpc1347.ld @@ -11,29 +11,29 @@ MEMORY { /* Define each memory region */ - MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ + MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash64 = 0x0 ; /* MFlash64 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ - __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_MFlash64 = 0x0 ; /* MFlash64 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ + __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -82,9 +82,9 @@ SECTIONS } > MFlash64 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash64 @@ -98,7 +98,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamUsb2 */ .data_RAM2 : ALIGN(4) @@ -153,7 +153,7 @@ SECTIONS *(.bss.$RamUsb2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamUsb2 + } > RamUsb2 /* BSS section for RamPeriph2 */ .bss_RAM3 : ALIGN(4) @@ -163,7 +163,7 @@ SECTIONS *(.bss.$RamPeriph2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamPeriph2 + } > RamPeriph2 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -182,7 +182,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamUsb2*) . = ALIGN(4) ; - } > RamUsb2 + } > RamUsb2 /* NOINIT section for RamPeriph2 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -190,13 +190,13 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamPeriph2*) . = ALIGN(4) ; - } > RamPeriph2 + } > RamPeriph2 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc8 @@ -204,11 +204,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -222,4 +222,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c b/hw/bsp/lpcxpresso1347/lpcxpresso1347.c index a9a67ae3a..8ee611037 100644 --- a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c +++ b/hw/bsp/lpcxpresso1347/lpcxpresso1347.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -64,7 +64,7 @@ const uint32_t ExtRateIn = 0; /* Pin muxing table, only items that need changing from their default pin state are in this table. */ -static const PINMUX_GRP_T pinmuxing[] = +static const PINMUX_GRP_T pinmuxing[] = { {0, 1, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_1 used for CLKOUT */ {0, 2, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)}, /* PIO0_2 used for SSEL */ diff --git a/hw/bsp/lpcxpresso1769/lpc1769.ld b/hw/bsp/lpcxpresso1769/lpc1769.ld index d1c83d8e2..095bd3d92 100644 --- a/hw/bsp/lpcxpresso1769/lpc1769.ld +++ b/hw/bsp/lpcxpresso1769/lpc1769.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamAHB32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 + } > RamAHB32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c index b7bce93d2..24333ad1a 100644 --- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c b/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c index 6bade7743..c94b0d6d8 100644 --- a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c +++ b/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/mbed1768/lpc1768.ld b/hw/bsp/mbed1768/lpc1768.ld index d1c83d8e2..095bd3d92 100644 --- a/hw/bsp/mbed1768/lpc1768.ld +++ b/hw/bsp/mbed1768/lpc1768.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamAHB32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 + } > RamAHB32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c index 08cf3adbd..9f3d294d3 100644 --- a/hw/bsp/mbed1768/mbed1768.c +++ b/hw/bsp/mbed1768/mbed1768.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld index 0b45ee7bd..796ed04f6 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 MM32 SE TEAM @@ -110,7 +110,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -121,7 +121,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -149,7 +149,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c index 9793ba241..c3f5bc16d 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 MM32 SE TEAM @@ -57,7 +57,7 @@ const int baudrate = 115200; void board_init (void) { -// usb clock +// usb clock USB_DeviceClockInit(); if ( SysTick_Config(SystemCoreClock / 1000) ) diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index 4fc314165..d61f775c7 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ngx4330/ngx4330.ld b/hw/bsp/ngx4330/ngx4330.ld index 7bd363f08..300869c20 100644 --- a/hw/bsp/ngx4330/ngx4330.ld +++ b/hw/bsp/ngx4330/ngx4330.ld @@ -12,39 +12,39 @@ MEMORY { /* Define each memory region */ - RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ - RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ - SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ + RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ + RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ } /* Define a symbol for the top of each memory region */ - __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ - __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ - __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __base_SPIFI = 0x14000000 ; /* SPIFI */ - __base_Flash = 0x14000000 ; /* Flash */ - __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ - __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ + __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ + __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ + __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __base_SPIFI = 0x14000000 ; /* SPIFI */ + __base_Flash = 0x14000000 ; /* Flash */ + __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ + __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ ENTRY(ResetISR) @@ -103,9 +103,9 @@ SECTIONS } > SPIFI /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > SPIFI @@ -117,9 +117,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > SPIFI __exidx_end = .; - + _etext = .; - + /* DATA section for RamLoc72 */ .data_RAM2 : ALIGN(4) @@ -322,11 +322,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc128 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -340,4 +340,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -} \ No newline at end of file +} diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.h b/hw/bsp/nrf/boards/adafruit_clue/board.h index 2c58e8fe8..8d6df786e 100644 --- a/hw/bsp/nrf/boards/adafruit_clue/board.h +++ b/hw/bsp/nrf/boards/adafruit_clue/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100755 --- a/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld b/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld index f570740b6..f609f743f 100755 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld @@ -20,7 +20,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h index d548e01c3..00fa8d8ea 100644 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h index a86c9dc7f..3dd354efa 100644 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100755 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 3208a948a..8e6ce3230 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h index ece6e34cb..605deea24 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h index 132173a80..33c370f53 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h index 01dd1f24f..072cb2714 100644 --- a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk index 3afa234aa..f25ec8f34 100644 --- a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk @@ -12,4 +12,4 @@ $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex flash: $(BUILD)/$(PROJECT).zip @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 \ No newline at end of file + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h index ab12d21aa..50d3067b3 100644 --- a/hw/bsp/nrf/boards/pca10056/board.h +++ b/hw/bsp/nrf/boards/pca10056/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/pca10059/board.h b/hw/bsp/nrf/boards/pca10059/board.h index 0810be648..ea3f4030d 100644 --- a/hw/bsp/nrf/boards/pca10059/board.h +++ b/hw/bsp/nrf/boards/pca10059/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/pca10100/board.h b/hw/bsp/nrf/boards/pca10100/board.h index 881133035..2b2579732 100644 --- a/hw/bsp/nrf/boards/pca10100/board.h +++ b/hw/bsp/nrf/boards/pca10100/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h index dcf829d9c..bc203f073 100644 --- a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index a07332d4c..02cec31ef 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld b/hw/bsp/nutiny_nuc121s/nuc121_flash.ld index 3966b276e..0c599a561 100644 --- a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld +++ b/hw/bsp/nutiny_nuc121s/nuc121_flash.ld @@ -69,7 +69,7 @@ SECTIONS *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) - + *(.rodata*) KEEP(*(.eh_frame*)) diff --git a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c index 7117a3422..ec66f8deb 100644 --- a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c +++ b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld b/hw/bsp/nutiny_nuc125s/nuc125_flash.ld index 3966b276e..0c599a561 100644 --- a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld +++ b/hw/bsp/nutiny_nuc125s/nuc125_flash.ld @@ -69,7 +69,7 @@ SECTIONS *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) - + *(.rodata*) KEEP(*(.eh_frame*)) diff --git a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c index 7117a3422..ec66f8deb 100644 --- a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c +++ b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c index da62e7bd2..90fa2ffd8 100644 --- a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c +++ b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c index 0d78116b8..9e7eacb23 100644 --- a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c +++ b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c index 49e66d2d0..1fc97e3dc 100644 --- a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c +++ b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c index e47ec5f31..0bb6cb728 100644 --- a/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c +++ b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c index 786f04978..895e23899 100644 --- a/hw/bsp/pic32mz/family.c +++ b/hw/bsp/pic32mz/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index e7eab088e..1eeeaf9af 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake index 8280c835d..f9887c09c 100644 --- a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake +++ b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake @@ -1 +1 @@ -set(PICO_BOARD pico) \ No newline at end of file +set(PICO_BOARD pico) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 678bce274..5d80ab66e 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -55,7 +55,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) message("Compiling TinyUSB with CFG_TUSB_DEBUG=1") set(TINYUSB_DEBUG_LEVEL 1) endif() - + target_compile_definitions(tinyusb_common_base INTERFACE CFG_TUSB_MCU=OPT_MCU_RP2040 CFG_TUSB_OS=${TINYUSB_OPT_OS} diff --git a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c index 9bd9399f6..4f87153ac 100644 --- a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c +++ b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c @@ -33,9 +33,9 @@ * - Short EMLE pad and 3.3V(GR-CITRUS pin name) with a wire. * * The pads are [the back side of GR-CITRUS](https://www.slideshare.net/MinaoYamamoto/grcitrusrx631/2). - * + * * Connect the pins between GR-CITRUS and JLink as follows. - * + * * | Function | GR-CITRUS pin | JLink pin No.| note | * |:---------:|:-------------:|:------------:|:--------:| * | VTref | 3.3V | 1 | | @@ -91,7 +91,7 @@ void INT_Excep_SCI0_TXI0(void) { uint8_t *buf = sci0_buf[0].buf; uint32_t cnt = sci0_buf[0].cnt; - + if (!buf || !cnt) { SCI0.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); return; diff --git a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c index 3c729ad50..691038fc8 100644 --- a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c +++ b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c @@ -126,7 +126,7 @@ void INT_Excep_SCI5_TXI5(void) { uint8_t *buf = sci_buf[0].buf; uint32_t cnt = sci_buf[0].cnt; - + if (!buf || !cnt) { SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); return; diff --git a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld index 8b3124c0e..9e12acec8 100644 --- a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld +++ b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/samd21/boards/atsamd21_xpro/board.h b/hw/bsp/samd21/boards/atsamd21_xpro/board.h index a3e03997c..315e40c78 100644 --- a/hw/bsp/samd21/boards/atsamd21_xpro/board.h +++ b/hw/bsp/samd21/boards/atsamd21_xpro/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.h b/hw/bsp/samd21/boards/circuitplayground_express/board.h index 2d7da1c0b..0037db00d 100644 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.h +++ b/hw/bsp/samd21/boards/circuitplayground_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.h b/hw/bsp/samd21/boards/curiosity_nano/board.h index 67924d809..1a4a833a3 100644 --- a/hw/bsp/samd21/boards/curiosity_nano/board.h +++ b/hw/bsp/samd21/boards/curiosity_nano/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h index b9292b9af..8e0caa6bd 100644 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ b/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/hw/bsp/samd21/boards/itsybitsy_m0/board.h index 177fb695e..6ee814da5 100644 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.h +++ b/hw/bsp/samd21/boards/itsybitsy_m0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/luna_d21/board.h b/hw/bsp/samd21/boards/luna_d21/board.h index 2e0a2a60f..776063636 100644 --- a/hw/bsp/samd21/boards/luna_d21/board.h +++ b/hw/bsp/samd21/boards/luna_d21/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/luna_d21/board.mk b/hw/bsp/samd21/boards/luna_d21/board.mk index 27a634e3a..508a72b1f 100644 --- a/hw/bsp/samd21/boards/luna_d21/board.mk +++ b/hw/bsp/samd21/boards/luna_d21/board.mk @@ -8,4 +8,3 @@ JLINK_DEVICE = ATSAMD21G18 # flash using dfu-util flash: $(BUILD)/$(PROJECT).bin dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< - diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.h b/hw/bsp/samd21/boards/metro_m0_express/board.h index 13b7556b0..d26aae53c 100644 --- a/hw/bsp/samd21/boards/metro_m0_express/board.h +++ b/hw/bsp/samd21/boards/metro_m0_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/qtpy/board.h b/hw/bsp/samd21/boards/qtpy/board.h index 6f8325e49..9ba39e966 100644 --- a/hw/bsp/samd21/boards/qtpy/board.h +++ b/hw/bsp/samd21/boards/qtpy/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/hw/bsp/samd21/boards/seeeduino_xiao/board.h index 0d1e9cef1..1bd63d6d9 100644 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.h +++ b/hw/bsp/samd21/boards/seeeduino_xiao/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/trinket_m0/board.h b/hw/bsp/samd21/boards/trinket_m0/board.h index c8692e6bd..741f2a7f3 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.h +++ b/hw/bsp/samd21/boards/trinket_m0/board.h @@ -31,4 +31,3 @@ // UART #define UART_SERCOM 0 - diff --git a/hw/bsp/samd21/boards/trinket_m0/board.mk b/hw/bsp/samd21/boards/trinket_m0/board.mk index 803ffe892..6addf13b7 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.mk +++ b/hw/bsp/samd21/boards/trinket_m0/board.mk @@ -2,4 +2,3 @@ CFLAGS += -D__SAMD21E18A__ -DCFG_EXAMPLE_VIDEO_READONLY # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/trinket_m0.ld - diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index 494dc393a..308fb51b5 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.h b/hw/bsp/samd51/boards/feather_m4_express/board.h index 1d5ed8040..4629643fd 100644 --- a/hw/bsp/samd51/boards/feather_m4_express/board.h +++ b/hw/bsp/samd51/boards/feather_m4_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/itsybitsy_m4/board.h b/hw/bsp/samd51/boards/itsybitsy_m4/board.h index 0760d4288..272315771 100644 --- a/hw/bsp/samd51/boards/itsybitsy_m4/board.h +++ b/hw/bsp/samd51/boards/itsybitsy_m4/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.h b/hw/bsp/samd51/boards/metro_m4_express/board.h index ab10ae4f8..5d7734576 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.h +++ b/hw/bsp/samd51/boards/metro_m4_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.mk b/hw/bsp/samd51/boards/metro_m4_express/board.mk index d7953cc24..57a680e91 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.mk +++ b/hw/bsp/samd51/boards/metro_m4_express/board.mk @@ -7,4 +7,3 @@ LD_FILE = $(BOARD_PATH)/$(BOARD).ld JLINK_DEVICE = ATSAMD51J19 flash: flash-bossac - diff --git a/hw/bsp/samd51/boards/pybadge/board.h b/hw/bsp/samd51/boards/pybadge/board.h index 1d5ed8040..4629643fd 100644 --- a/hw/bsp/samd51/boards/pybadge/board.h +++ b/hw/bsp/samd51/boards/pybadge/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/pyportal/board.h b/hw/bsp/samd51/boards/pyportal/board.h index 9e51ded32..ff04c900b 100644 --- a/hw/bsp/samd51/boards/pyportal/board.h +++ b/hw/bsp/samd51/boards/pyportal/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 020e638c4..3da89ee14 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/same54xplainedpro/same54p20a_flash.ld b/hw/bsp/same54xplainedpro/same54p20a_flash.ld index 97072bfe6..1f427a066 100644 --- a/hw/bsp/same54xplainedpro/same54p20a_flash.ld +++ b/hw/bsp/same54xplainedpro/same54p20a_flash.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/same54xplainedpro/same54p20a_sram.ld b/hw/bsp/same54xplainedpro/same54p20a_sram.ld index 6219f4afe..e6e33ec48 100644 --- a/hw/bsp/same54xplainedpro/same54p20a_sram.ld +++ b/hw/bsp/same54xplainedpro/same54p20a_sram.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/samg55xplained/samg55xplained.c b/hw/bsp/samg55xplained/samg55xplained.c index 027c88e2f..6e1ed56a9 100644 --- a/hw/bsp/samg55xplained/samg55xplained.c +++ b/hw/bsp/samg55xplained/samg55xplained.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, hathach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h index a3e03997c..315e40c78 100644 --- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h +++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.h b/hw/bsp/saml2x/boards/saml22_feather/board.h index 13a326000..72e9897b6 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/board.h +++ b/hw/bsp/saml2x/boards/saml22_feather/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld b/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld index d1aaa44fc..156c3e7e4 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld +++ b/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h index 7fc690ab2..735f6afc8 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld b/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld index d1aaa44fc..156c3e7e4 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c index 470fde750..f119d23a1 100644 --- a/hw/bsp/saml2x/family.c +++ b/hw/bsp/saml2x/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/sltb009a/sltb009a.c b/hw/bsp/sltb009a/sltb009a.c index b5eb5ed5d..2a5d112a8 100644 --- a/hw/bsp/sltb009a/sltb009a.c +++ b/hw/bsp/sltb009a/sltb009a.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Rafael Silva (@perigoso) @@ -712,7 +712,7 @@ uint32_t board_millis(void) * @retval None */ void assert_failed(char *file, uint32_t line) -{ +{ /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ diff --git a/hw/bsp/spresense/board_spresense.c b/hw/bsp/spresense/board_spresense.c index 256bccd15..5f778ad70 100644 --- a/hw/bsp/spresense/board_spresense.c +++ b/hw/bsp/spresense/board_spresense.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2019 Sony Semiconductor Solutions Corporation @@ -64,7 +64,7 @@ void board_led_write(bool state) // a '1' means active (pressed), a '0' means inactive. uint32_t board_button_read(void) { - if (board_gpio_read(BUTTON_PIN)) + if (board_gpio_read(BUTTON_PIN)) { return 0; } @@ -96,7 +96,7 @@ uint32_t board_millis(void) /* Wait until RTC is available */ while (g_rtc_enabled == false); - if (clock_gettime(CLOCK_MONOTONIC, &tp)) + if (clock_gettime(CLOCK_MONOTONIC, &tp)) { return 0; } diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h index 7c527e2c2..9af81e63c 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk index cf787a103..1cc443352 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk @@ -12,4 +12,4 @@ IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f070xb_flash.icf JLINK_DEVICE = stm32f070rb # flash target using on-board stlink -flash: flash-stlink \ No newline at end of file +flash: flash-stlink diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld index 4a6491510..6bb9d33cb 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld @@ -102,12 +102,12 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab : { + .ARM.extab : { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >FLASH - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -124,7 +124,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >FLASH - + .init_array : { . = ALIGN(4); @@ -134,7 +134,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >FLASH - + .fini_array : { . = ALIGN(4); @@ -149,7 +149,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -158,9 +158,9 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> FLASH - + /* Uninitialized data section into "RAM" Ram type memory */ . = ALIGN(4); .bss : diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld index f0879e929..8715e0723 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld +++ b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/hw/bsp/stm32f0/boards/stm32f072disco/board.h index 0b1824b8e..1febd01e8 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/hw/bsp/stm32f0/boards/stm32f072eval/board.h index 8869d5dc9..7dcfa3e85 100644 --- a/hw/bsp/stm32f0/boards/stm32f072eval/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index 884208fb1..bfa843494 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/stm32f0xx_hal_conf.h b/hw/bsp/stm32f0/stm32f0xx_hal_conf.h index 0bf053e13..b205464f3 100644 --- a/hw/bsp/stm32f0/stm32f0xx_hal_conf.h +++ b/hw/bsp/stm32f0/stm32f0xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_CAN_MODULE_ENABLED */ /*#define HAL_CEC_MODULE_ENABLED */ @@ -65,15 +65,15 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ /** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ @@ -82,24 +82,24 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value */ -#if !defined (HSI_STARTUP_TIMEOUT) +#if !defined (HSI_STARTUP_TIMEOUT) #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ +#endif /* HSI_STARTUP_TIMEOUT */ /** * @brief Internal High Speed oscillator for ADC (HSI14) value. */ -#if !defined (HSI14_VALUE) +#if !defined (HSI14_VALUE) #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -108,7 +108,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -117,8 +117,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -127,7 +127,7 @@ */ #if !defined (LSE_VALUE) #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ +#endif /* LSE_VALUE */ /** * @brief Time out for LSE start up value in ms. @@ -143,8 +143,8 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ /* Warning: Must be set to higher priority for HAL_Delay() */ /* and HAL_GetTick() usage under interrupt context */ @@ -175,14 +175,14 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ - #define USE_FULL_ASSERT 1 + #define USE_FULL_ASSERT 1 /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -299,7 +299,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -308,8 +308,8 @@ void assert_failed(const char* file, uint32_t line); #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - +#endif /* USE_FULL_ASSERT */ + #ifdef __cplusplus } #endif @@ -318,4 +318,3 @@ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld index c434ca038..95836522e 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h index 57a607ed5..8fa8f4ffa 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld index da637d1b0..524ac7c03 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h index bedce7f14..c8dba4268 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index 6f0471096..5e112de70 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -53,7 +53,7 @@ void USBWakeUp_IRQHandler(void) void board_init(void) { board_stm32f1_clock_init(); - + // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); @@ -70,7 +70,7 @@ void board_init(void) NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - + // LED GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = LED_PIN; @@ -153,7 +153,7 @@ void HardFault_Handler (void) * @retval None */ void assert_failed(const char *file, uint32_t line) -{ +{ /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ diff --git a/hw/bsp/stm32f1/stm32f1xx_hal_conf.h b/hw/bsp/stm32f1/stm32f1xx_hal_conf.h index 5243e5bca..45ef993da 100644 --- a/hw/bsp/stm32f1/stm32f1xx_hal_conf.h +++ b/hw/bsp/stm32f1/stm32f1xx_hal_conf.h @@ -32,7 +32,7 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ #define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ @@ -69,9 +69,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #if defined(USE_STM3210C_EVAL) #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ #else @@ -86,7 +86,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ @@ -95,7 +95,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -119,7 +119,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -151,7 +151,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -168,7 +168,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -176,9 +176,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -190,7 +190,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -205,13 +205,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -233,7 +233,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -243,7 +243,7 @@ #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32f1xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ - + #ifdef HAL_EXTI_MODULE_ENABLED #include "stm32f1xx_hal_exti.h" #endif /* HAL_EXTI_MODULE_ENABLED */ @@ -251,7 +251,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f1xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CAN_MODULE_ENABLED #include "stm32f1xx_hal_can.h" #endif /* HAL_CAN_MODULE_ENABLED */ @@ -310,15 +310,15 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f1xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ +#endif /* HAL_PCCARD_MODULE_ENABLED */ #ifdef HAL_SD_MODULE_ENABLED #include "stm32f1xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ +#endif /* HAL_SD_MODULE_ENABLED */ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f1xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_SPI_MODULE_ENABLED #include "stm32f1xx_hal_spi.h" @@ -358,7 +358,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -367,8 +367,8 @@ void assert_failed(const char* file, uint32_t line); #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - +#endif /* USE_FULL_ASSERT */ + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld index 5010435ae..3fce1b578 100644 --- a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld +++ b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f207nucleo/stm32f207nucleo.c index d77643661..80f762c93 100644 --- a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c +++ b/hw/bsp/stm32f207nucleo/stm32f207nucleo.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -105,7 +105,7 @@ void SystemClock_Config(void) void board_init(void) { SystemClock_Config(); - + #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); diff --git a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h b/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h index 2ab46b260..b38a9d951 100644 --- a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h +++ b/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F2xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CRC_MODULE_ENABLED */ @@ -42,7 +42,7 @@ /* #define HAL_DMA_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ #define HAL_EXTI_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ @@ -52,8 +52,8 @@ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SD_MODULE_ENABLED */ @@ -65,7 +65,7 @@ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ #define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED /* #define HAL_HCD_MODULE_ENABLED */ @@ -73,9 +73,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -86,7 +86,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ @@ -95,7 +95,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -113,8 +113,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ @@ -126,7 +126,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -163,7 +163,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -180,7 +180,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -190,7 +190,7 @@ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -202,7 +202,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -217,7 +217,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -228,7 +228,7 @@ #define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ #define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - + /* ################## SPI peripheral configuration ########################## */ /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver @@ -240,7 +240,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -258,7 +258,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f2xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f2xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -276,7 +276,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f2xx_hal_cryp.h" + #include "stm32f2xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DAC_MODULE_ENABLED @@ -294,7 +294,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f2xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f2xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -309,7 +309,7 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f2xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ +#endif /* HAL_PCCARD_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f2xx_hal_hash.h" @@ -378,14 +378,14 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f2xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -402,6 +402,6 @@ #endif #endif /* __STM32F2xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld index 7f46c71b2..981107af1 100644 --- a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld +++ b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f303disco/stm32f303disco.c index 940c49d26..ac9bda983 100644 --- a/hw/bsp/stm32f303disco/stm32f303disco.c +++ b/hw/bsp/stm32f303disco/stm32f303disco.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h index 0abcbb019..82d3765af 100644 --- a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h +++ b/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -57,7 +57,7 @@ /* #define HAL_OPAMP_MODULE_ENABLED */ /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SDADC_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ @@ -73,15 +73,15 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ /** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ @@ -90,25 +90,25 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value */ -#if !defined (HSI_STARTUP_TIMEOUT) +#if !defined (HSI_STARTUP_TIMEOUT) #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ +#endif /* HSI_STARTUP_TIMEOUT */ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -124,11 +124,11 @@ */ #if !defined (LSE_STARTUP_TIMEOUT) #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ +#endif /* LSE_STARTUP_TIMEOUT */ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source + * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) * - External clock not generated on EVAL 373 @@ -256,8 +256,8 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_HRTIM_MODULE_ENABLED #include "stm32f3xx_hal_hrtim.h" #endif /* HAL_HRTIM_MODULE_ENABLED */ diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld index 9eb53bcc0..0dc2879a4 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index 19d0a1ea4..d1ad2a6ce 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld index 9eb53bcc0..0dc2879a4 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index 685919c57..c126f0666 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld index 2bc5f6c14..b91f456ca 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index e1fef7277..e6c99a462 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h index 2ab9a1d57..16f081cfb 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld index aac6577ea..549787945 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index 693e0393f..c38f354ce 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld index 56dcea605..45912ac32 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(4); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index e1fef7277..e6c99a462 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h index 2ab9a1d57..16f081cfb 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld index 4477229ea..85bf5c4c4 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index 008a94a5d..57d1e061e 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld index 2372cc1d9..38dd3d321 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index 7f4a4fa15..d61b70eb9 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld index 2372cc1d9..38dd3d321 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h index a2c11d717..7bbd6b54f 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -263,7 +263,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -281,7 +281,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -303,7 +303,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -325,7 +325,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -340,11 +340,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -425,7 +425,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -464,7 +464,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 93ab5bb35..a308bae05 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h index d0ef6625f..ed02df061 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index 93d83efc6..258786b7f 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index ee342b9f5..1c7e6dd2b 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld index e1e60bc78..eeb0e29f3 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h index 92c109a72..cf895af87 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h index 234191b00..03dec8f0d 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h @@ -2,7 +2,7 @@ ****************************************************************************** * @file stm32f7xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration file. + * @brief HAL configuration file. ****************************************************************************** * @attention * @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F7xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -44,7 +44,7 @@ #define HAL_DMA_MODULE_ENABLED /* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ @@ -58,7 +58,7 @@ /* #define HAL_LTDC_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -84,9 +84,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -97,7 +97,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -106,7 +106,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -124,8 +124,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ @@ -137,7 +137,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -185,7 +185,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -202,7 +202,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -211,7 +211,7 @@ /* Section 2: PHY configuration section */ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY ((uint32_t)0x00000FFF) /* PHY Configuration delay */ #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) @@ -223,7 +223,7 @@ #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -238,7 +238,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -261,7 +261,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -275,7 +275,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f7xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f7xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -301,7 +301,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" + #include "stm32f7xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -323,7 +323,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f7xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f7xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -338,7 +338,7 @@ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f7xx_hal_hash.h" @@ -443,14 +443,14 @@ #ifdef HAL_MDIOS_MODULE_ENABLED #include "stm32f7xx_hal_mdios.h" #endif /* HAL_MDIOS_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -467,6 +467,6 @@ #endif #endif /* __STM32F7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld index 3785f9cbf..520a75539 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h index 1283f2313..e053572a7 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk index a460245b2..be5862612 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk @@ -1,5 +1,5 @@ PORT ?= 0 -SPEED ?= full +SPEED ?= full CFLAGS += \ -DSTM32F767xx \ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h index 234191b00..03dec8f0d 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h @@ -2,7 +2,7 @@ ****************************************************************************** * @file stm32f7xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration file. + * @brief HAL configuration file. ****************************************************************************** * @attention * @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F7xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -44,7 +44,7 @@ #define HAL_DMA_MODULE_ENABLED /* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ @@ -58,7 +58,7 @@ /* #define HAL_LTDC_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -84,9 +84,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -97,7 +97,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -106,7 +106,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -124,8 +124,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ @@ -137,7 +137,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -185,7 +185,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -202,7 +202,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -211,7 +211,7 @@ /* Section 2: PHY configuration section */ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY ((uint32_t)0x00000FFF) /* PHY Configuration delay */ #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) @@ -223,7 +223,7 @@ #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -238,7 +238,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -261,7 +261,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -275,7 +275,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f7xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f7xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -301,7 +301,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" + #include "stm32f7xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -323,7 +323,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f7xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f7xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -338,7 +338,7 @@ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f7xx_hal_hash.h" @@ -443,14 +443,14 @@ #ifdef HAL_MDIOS_MODULE_ENABLED #include "stm32f7xx_hal_mdios.h" #endif /* HAL_MDIOS_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -467,6 +467,6 @@ #endif #endif /* __STM32F7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/hw/bsp/stm32f7/boards/stm32f769disco/board.h index 5ec217f5f..472af0b98 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld index 9c327483b..c43829994 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld @@ -135,7 +135,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -146,7 +146,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -174,7 +174,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -186,5 +186,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index f3ba54576..f5177fd10 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32g4/stm32g4xx_hal_conf.h b/hw/bsp/stm32g4/stm32g4xx_hal_conf.h index ad5f7dbd4..632c4f0ac 100644 --- a/hw/bsp/stm32g4/stm32g4xx_hal_conf.h +++ b/hw/bsp/stm32g4/stm32g4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32G4xx_HAL_CONF_H @@ -30,10 +30,10 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ - -#define HAL_MODULE_ENABLED + +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ @@ -111,9 +111,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (24000000UL) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -124,7 +124,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ @@ -145,10 +145,10 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ -#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /** * @brief External Low Speed oscillator (LSE) value. @@ -156,7 +156,7 @@ The real value may vary depending on the variations in voltage and temperature.* */ #if !defined (LSE_VALUE) #define LSE_VALUE (32768UL) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ +#endif /* LSE_VALUE */ #if !defined (LSE_STARTUP_TIMEOUT) #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ @@ -177,10 +177,10 @@ The real value may vary depending on the variations in voltage and temperature.* /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ +#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ #define USE_RTOS 0U #define PREFETCH_ENABLE 0U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ The real value may vary depending on the variations in voltage and temperature.* /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.mk b/hw/bsp/stm32h7/boards/daisyseed/board.mk index 4d718f04e..d53782496 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.mk +++ b/hw/bsp/stm32h7/boards/daisyseed/board.mk @@ -16,4 +16,3 @@ JLINK_DEVICE = stm32h750ibk6_m7 # flash target using on-board stlink flash: flash-stlink - diff --git a/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld b/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld index 83904067a..3588ada5b 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld +++ b/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld @@ -172,5 +172,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld index 7ee40671c..336afc01f 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld @@ -118,7 +118,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -129,7 +129,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >DTCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -157,7 +157,7 @@ SECTIONS . = ALIGN(8); } >DTCMRAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -169,5 +169,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld index 7ee40671c..336afc01f 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld @@ -118,7 +118,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -129,7 +129,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >DTCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -157,7 +157,7 @@ SECTIONS . = ALIGN(8); } >DTCMRAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -169,5 +169,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk index b51b109f6..86347ade7 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk @@ -19,4 +19,3 @@ JLINK_DEVICE = stm32h745xi_m7 # flash target using on-board stlink flash: flash-stlink - diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld index e99bb977b..697a1a1df 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld @@ -171,5 +171,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk index fbf4b55c6..e8202d9fc 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk @@ -21,4 +21,4 @@ IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf JLINK_DEVICE = stm32h743ii # flash target using jlink -flash: flash-jlink \ No newline at end of file +flash: flash-jlink diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 65ffc8ef4..35b2cd55b 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -91,7 +91,7 @@ void board_init(void) #endif NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif - + GPIO_InitTypeDef GPIO_InitStruct; // LED diff --git a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h index a7cc6d826..216fc82f2 100644 --- a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h +++ b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h @@ -1,7 +1,7 @@ /** ****************************************************************************** * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed * to stm32h7xx_hal_conf.h. ****************************************************************************** @@ -32,7 +32,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32H7xx_HAL_CONF_H @@ -478,6 +478,6 @@ #endif #endif /* __STM32H7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld index dfefe59f1..d4d5b6ca5 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h index 8ad3e43c8..c8963199b 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -58,43 +58,43 @@ static inline void board_stm32l0_clock_init(void) RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; static RCC_CRSInitTypeDef RCC_CRSInitStruct; - + /* Enable HSI Oscillator to be used as System clock source Enable HSI48 Oscillator to be used as USB clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - + HAL_RCC_OscConfig(&RCC_OscInitStruct); + /* Select HSI48 as USB clock source */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 + + /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 clock dividers */ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); - + /*Configure the clock recovery system (CRS)**********************************/ - + /*Enable CRS Clock*/ - __HAL_RCC_CRS_CLK_ENABLE(); - + __HAL_RCC_CRS_CLK_ENABLE(); + /* Default Synchro Signal division factor (not divided) */ - RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; + RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ - RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; + RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; /* HSI48 is synchronized with USB SOF at 1KHz rate */ RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); - RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; + RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; /* Set the TRIM[5:0] to the default value*/ - RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; - /* Start automatic synchronization */ + RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; + /* Start automatic synchronization */ HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); } diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index dcd71a513..6bce88b39 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h index cc20ea8e0..e3a131043 100644 --- a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h +++ b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h @@ -2,22 +2,22 @@ ****************************************************************************** * @file stm32l0xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed * to stm32l0xx_hal_conf.h. ****************************************************************************** * @attention * - *

© Copyright (c) 2016 STMicroelectronics. + *

© Copyright (c) 2016 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the + * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L0xx_HAL_CONF_H @@ -32,9 +32,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ /*#define HAL_CRC_MODULE_ENABLED */ @@ -69,9 +69,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -90,7 +90,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -108,7 +108,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -128,24 +128,24 @@ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ - + /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U +#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U #define PREREAD_ENABLE 0U #define BUFFER_CACHE_DISABLE 0U /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -191,13 +191,13 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED #include "stm32l0xx_hal_rcc.h" #endif /* HAL_RCC_MODULE_ENABLED */ - + #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32l0xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ @@ -233,11 +233,11 @@ #ifdef HAL_FIREWALL_MODULE_ENABLED #include "stm32l0xx_hal_firewall.h" #endif /* HAL_FIREWALL_MODULE_ENABLED */ - + #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32l0xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_I2C_MODULE_ENABLED #include "stm32l0xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ @@ -257,7 +257,7 @@ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32l0xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ - + #ifdef HAL_PWR_MODULE_ENABLED #include "stm32l0xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ @@ -316,7 +316,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -332,7 +332,6 @@ #endif #endif /* __STM32L0xx_HAL_CONF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld index 79427d80b..033dcc0ad 100644 --- a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld +++ b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l0538disco/stm32l0538disco.c b/hw/bsp/stm32l0538disco/stm32l0538disco.c index f4c38d150..46f6f0ff6 100644 --- a/hw/bsp/stm32l0538disco/stm32l0538disco.c +++ b/hw/bsp/stm32l0538disco/stm32l0538disco.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h index 773b74e29..a917214c3 100644 --- a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h +++ b/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h @@ -7,39 +7,39 @@ * * Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved. * - * Redistribution and use in source and binary forms, with or without + * Redistribution and use in source and binary forms, with or without * modification, are permitted, provided that the following conditions are met: * - * 1. Redistribution of source code must retain the above copyright notice, + * 1. Redistribution of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this + * 4. This software, including modifications and/or derivative works of this * software, must execute solely and exclusively on microcontroller or * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L0xx_HAL_CONF_H @@ -54,36 +54,36 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED // #define HAL_ADC_MODULE_ENABLED -/* #define HAL_COMP_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ #define HAL_DMA_MODULE_ENABLED /* #define HAL_FIREWALL_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED /* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LCD_MODULE_ENABLED */ +/* #define HAL_LCD_MODULE_ENABLED */ /* #define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED //#define HAL_RNG_MODULE_ENABLED /* #define HAL_RTC_MODULE_ENABLED */ //#define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ /* #define HAL_TSC_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ //#define HAL_PCD_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ @@ -93,9 +93,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -114,7 +114,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -123,7 +123,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -132,7 +132,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -152,24 +152,24 @@ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ - + /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U #define PREREAD_ENABLE 1U #define BUFFER_CACHE_DISABLE 0U /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -185,7 +185,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -199,7 +199,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32l0xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32l0xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -211,7 +211,7 @@ #ifdef HAL_COMP_MODULE_ENABLED #include "stm32l0xx_hal_comp.h" #endif /* HAL_COMP_MODULE_ENABLED */ - + #ifdef HAL_CRC_MODULE_ENABLED #include "stm32l0xx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ @@ -231,7 +231,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32l0xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_I2C_MODULE_ENABLED #include "stm32l0xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ @@ -251,7 +251,7 @@ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32l0xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ - + #ifdef HAL_PWR_MODULE_ENABLED #include "stm32l0xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ @@ -310,7 +310,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -326,6 +326,6 @@ #endif #endif /* __STM32L0xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld index d4b86b3e3..4ae4a4cf4 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld @@ -83,8 +83,8 @@ SECTIONS . = ALIGN(8); } >FLASH - .ARM.extab : - { + .ARM.extab : + { . = ALIGN(8); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(8); @@ -105,7 +105,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(8); } >FLASH - + .init_array : { . = ALIGN(8); @@ -129,7 +129,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(8); _sdata = .; /* create a global symbol at data start */ @@ -140,7 +140,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -168,7 +168,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -180,5 +180,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h index 704d742cc..72d17b760 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -94,7 +94,7 @@ static inline void board_clock_init(void) RCC_OscInitStruct.PLL.PLLN = 10; RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; - + HAL_RCC_OscConfig(&RCC_OscInitStruct); /** Initializes the CPU, AHB and APB buses clocks @@ -122,7 +122,7 @@ static inline void board_clock_init(void) RCC_CRSInitStruct.HSI48CalibrationValue = 32; HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct); - + /* Select HSI48 output as USB clock source */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld index d6865f49d..3bb13ed85 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld @@ -82,8 +82,8 @@ SECTIONS . = ALIGN(8); } >FLASH - .ARM.extab : - { + .ARM.extab : + { . = ALIGN(8); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(8); @@ -104,7 +104,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(8); } >FLASH - + .init_array : { . = ALIGN(8); @@ -128,7 +128,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(8); _sdata = .; /* create a global symbol at data start */ @@ -139,7 +139,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -167,7 +167,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -179,5 +179,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.h b/hw/bsp/stm32l4/boards/stm32l476disco/board.h index 42c657d5e..9d4351b39 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/board.h +++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld index c1a490a70..02c07dd74 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld @@ -102,12 +102,12 @@ SECTIONS . = ALIGN(4); } >ROM - .ARM.extab : { + .ARM.extab : { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >ROM - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -124,7 +124,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >ROM - + .init_array : { . = ALIGN(4); @@ -134,7 +134,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >ROM - + .fini_array : { . = ALIGN(4); @@ -149,7 +149,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -158,7 +158,7 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> ROM /* Uninitialized data section into "RAM" Ram type memory */ diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h index 1df389aed..47ada6bb9 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld index f77c72d1b..267a87a8b 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h index 1df389aed..47ada6bb9 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/stm32l4xx_hal_conf.h b/hw/bsp/stm32l4/stm32l4xx_hal_conf.h index 312f86da1..25dbc0523 100644 --- a/hw/bsp/stm32l4/stm32l4xx_hal_conf.h +++ b/hw/bsp/stm32l4/stm32l4xx_hal_conf.h @@ -50,7 +50,7 @@ /* #define HAL_NAND_MODULE_ENABLED */ // #define HAL_NOR_MODULE_ENABLED // #define HAL_SRAM_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED //#define HAL_I2C_MODULE_ENABLED /* #define HAL_IRDA_MODULE_ENABLED */ @@ -115,7 +115,7 @@ * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency * which is subject to manufacturing process variations. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. The real value my vary depending on manufacturing process variations.*/ #endif /* HSI48_VALUE */ @@ -123,7 +123,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -142,7 +142,7 @@ /** * @brief External clock source for SAI1 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. */ #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) @@ -151,7 +151,7 @@ /** * @brief External clock source for SAI2 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. */ #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) diff --git a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h index 15dffa813..87c3683de 100644 --- a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h +++ b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h @@ -503,4 +503,3 @@ #endif #endif /* STM32U5xx_HAL_CONF_H */ - diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld b/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld index 660f30161..916f11866 100644 --- a/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld @@ -113,7 +113,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -124,7 +124,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM1 AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -152,7 +152,7 @@ SECTIONS . = ALIGN(8); } >RAM1 - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -167,5 +167,3 @@ SECTIONS MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED } - - diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index 525d637ea..e9ca59866 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk index d60365d1d..0ff24ab60 100644 --- a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk +++ b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk @@ -1,5 +1,5 @@ CFLAGS += -DTM4C123GH6PM - + LD_FILE = $(BOARD_PATH)/tm4c123.ld # For flash-jlink target diff --git a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld index e2720a9ac..351857bd6 100644 --- a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld +++ b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld @@ -6,37 +6,37 @@ _Min_Heap_Size = 0; /* required amount of heap */ _Min_Stack_Size = 0x1000; /* required amount of stack */ -MEMORY +MEMORY { FLASH(rx) : ORIGIN = 0x00000000, LENGTH = 256K SRAM(rwx) : ORIGIN = 0x20000000, LENGTH = 32K } -SECTIONS +SECTIONS { - .text : + .text : { . = ALIGN(4) ; - *(.vectors) - *(.text) + *(.vectors) + *(.text) *(.text.*) *(.init) *(.fini) *(.rodata) *(.rodata.*) - . = ALIGN(4) ; - __end_text = . ; + . = ALIGN(4) ; + __end_text = . ; } >FLASH - + .data : AT(ADDR(.text) + SIZEOF(.text)) { . = ALIGN(4); - __start_data = . ; + __start_data = . ; __la_data = LOADADDR(.data); - *(.data) + *(.data) *(.data.*) . = ALIGN(4); - __end_data = . ; + __end_data = . ; } >SRAM @@ -47,7 +47,7 @@ SECTIONS __bss_start__ = __start_bss; *(.bss) *(.bss.*) - *(.COMMON) + *(.COMMON) __end_bss = . ; . = ALIGN(4); }>SRAM diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c index 87b94289b..3f4f43220 100644 --- a/hw/bsp/tm4c123/family.c +++ b/hw/bsp/tm4c123/family.c @@ -175,4 +175,3 @@ uint32_t board_millis (void) return system_ticks; } #endif - diff --git a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h index 3e2cb9583..2d4764f40 100644 --- a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h +++ b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/mcu/bridgetek/ft9xx/Readme.md b/hw/mcu/bridgetek/ft9xx/Readme.md index 1db91058c..adf8fc765 100644 --- a/hw/mcu/bridgetek/ft9xx/Readme.md +++ b/hw/mcu/bridgetek/ft9xx/Readme.md @@ -2,6 +2,6 @@ **BridgeTek** provides a hardware abstraction library with software source code for the SDKs for FT9xx software family. -Whole SDK repository is installed as part of the FT9xx Toolchain and can be downloaded from BridgeTek web page `https://www.brtchip.com`. +Whole SDK repository is installed as part of the FT9xx Toolchain and can be downloaded from BridgeTek web page `https://www.brtchip.com`. -Registers definition files, and included peripheral register definition files have licenses that allow for redistribution. +Registers definition files, and included peripheral register definition files have licenses that allow for redistribution. diff --git a/hw/mcu/bridgetek/ft9xx/scripts/crt0.S b/hw/mcu/bridgetek/ft9xx/scripts/crt0.S index 62fa266ee..380b31c37 100644 --- a/hw/mcu/bridgetek/ft9xx/scripts/crt0.S +++ b/hw/mcu/bridgetek/ft9xx/scripts/crt0.S @@ -50,11 +50,11 @@ _start: codestart: jmp init - + .global _exithook _exithook: # Debugger uses '_exithook' at 0x90 to catch program exit return - + init: # Disable all interrupts ldk $r0,0x80 @@ -63,12 +63,12 @@ init: .else sta.b 0x100e3,$r0 .endif - + # Reset all peripherals # lda.l $r0, 0x10018 # bins.l $r0, $r0, 0x23F # Set bit 31 # sta.l 0x10018, $r0 - + # Initialize DATA by copying from program memory ldk.l $r0,__data_load_start ldk.l $r1,__data_load_end diff --git a/hw/mcu/dialog/README.md b/hw/mcu/dialog/README.md index 69676f081..33d270aac 100644 --- a/hw/mcu/dialog/README.md +++ b/hw/mcu/dialog/README.md @@ -3,7 +3,5 @@ **Dialog Semiconductors** provides SDKs for DA146x MCU family. Most of the files there can't be redistributed. Registers definition file `DA1469xAB.h` and some **ARM** originated headers are have licenses that allow -for redistribution. +for redistribution. Whole SDK repository can be downloaded from Dialog Semiconductor web page `https://www.dialog.com` - - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt index b324eb286..7e8067a6f 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt @@ -24,4 +24,3 @@ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h index fdb1a971c..8f871ea31 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h @@ -268,4 +268,3 @@ #endif /* __CMSIS_COMPILER_H */ - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h index 47a4b59d8..812c3789a 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h @@ -47,9 +47,9 @@ #ifndef __STATIC_INLINE #define __STATIC_INLINE static inline #endif -#ifndef __STATIC_FORCEINLINE +#ifndef __STATIC_FORCEINLINE #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline -#endif +#endif #ifndef __NO_RETURN #define __NO_RETURN __attribute__((__noreturn__)) #endif @@ -586,7 +586,7 @@ __STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence zero is returned always in non-secure mode. - + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). \return PSPLIM Register value */ @@ -631,7 +631,7 @@ __STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence the write is silently ignored in non-secure mode. - + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set */ @@ -768,7 +768,7 @@ __STATIC_FORCEINLINE uint32_t __get_FPSCR(void) { #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#if __has_builtin(__builtin_arm_get_fpscr) +#if __has_builtin(__builtin_arm_get_fpscr) // Re-enable using built-in when GCC has been fixed // || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h index e2cf6b966..a8cd3ea45 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h @@ -62,7 +62,7 @@ */ #include "cmsis_version.h" - + /* CMSIS CM0 definitions */ #define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ #define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h index 7249e1331..05b61383e 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h @@ -2065,7 +2065,7 @@ typedef struct /* Special LR values for Secure/Non-Secure call handling and exception handling */ -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ #define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ /* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ @@ -2080,7 +2080,7 @@ typedef struct /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ #define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else +#else #define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ #endif diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h index bc3b05109..50bb56333 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h @@ -103,7 +103,7 @@ (MPU_RLAR_EN_Msk)) #if defined(MPU_RLAR_PXN_Pos) - + /** \brief Region Limit Address Register with PXN value * \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. * \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. @@ -114,7 +114,7 @@ ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ (MPU_RLAR_EN_Msk)) - + #endif /** @@ -124,7 +124,7 @@ typedef struct { uint32_t RBAR; /*!< Region Base Address Register value */ uint32_t RLAR; /*!< Region Limit Address Register value */ } ARM_MPU_Region_t; - + /** Enable the MPU. * \param MPU_Control Default access permissions for unconfigured regions. */ @@ -185,11 +185,11 @@ __STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t at const uint8_t reg = idx / 4U; const uint32_t pos = ((idx % 4U) * 8U); const uint32_t mask = 0xFFU << pos; - + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { return; // invalid index } - + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); } @@ -236,7 +236,7 @@ __STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) * \param rnr Region number to be cleared. */ __STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) -{ +{ ARM_MPU_ClrRegionEx(MPU_NS, rnr); } #endif @@ -246,7 +246,7 @@ __STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) { mpu->RNR = rnr; @@ -258,7 +258,7 @@ __STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t r * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) { ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); @@ -269,10 +269,10 @@ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rla * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) { - ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); } #endif @@ -284,7 +284,7 @@ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t __STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) { uint32_t i; - for (i = 0U; i < len; ++i) + for (i = 0U; i < len; ++i) { dst[i] = src[i]; } @@ -296,7 +296,7 @@ __STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_ * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; if (cnt == 1U) { @@ -305,7 +305,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ } else { uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; - + mpu->RNR = rnrBase; while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { uint32_t c = MPU_TYPE_RALIASES - rnrOffset; @@ -316,7 +316,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ rnrBase += MPU_TYPE_RALIASES; mpu->RNR = rnrBase; } - + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); } } @@ -326,7 +326,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { ARM_MPU_LoadEx(MPU, rnr, table, cnt); } @@ -337,11 +337,10 @@ __STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, u * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); } #endif #endif - diff --git a/hw/mcu/dialog/da1469x/da1469x.ld b/hw/mcu/dialog/da1469x/da1469x.ld index c91dea841..0133f3759 100644 --- a/hw/mcu/dialog/da1469x/da1469x.ld +++ b/hw/mcu/dialog/da1469x/da1469x.ld @@ -225,4 +225,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/mcu/dialog/da1469x/include/mcu/mcu.h b/hw/mcu/dialog/da1469x/include/mcu/mcu.h index 1e6736785..38961e828 100644 --- a/hw/mcu/dialog/da1469x/include/mcu/mcu.h +++ b/hw/mcu/dialog/da1469x/include/mcu/mcu.h @@ -162,4 +162,3 @@ void mcu_gpio_exit_sleep(void); #endif #endif /* __MCU_MCU_H_ */ - diff --git a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h index 76a432bfd..9ba24f458 100644 --- a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h +++ b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h @@ -539,7 +539,7 @@ SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_v /**@brief Remove a Vendor Specific base UUID. - * + * * @details This call removes a Vendor Specific base UUID that has been added with @ref sd_ble_uuid_vs_add. This function allows * the application to reuse memory allocated for Vendor Specific base UUIDs. * diff --git a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h index c434fefb3..e11149435 100644 --- a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h +++ b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h @@ -1666,7 +1666,7 @@ SVCALL(SD_BLE_GAP_ADDR_GET, uint32_t, sd_ble_gap_addr_get(ble_gap_addr_t *p_addr * * @retval ::NRF_SUCCESS Address successfully retrieved. * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. + * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. * @retval ::NRF_ERROR_INVALID_STATE The advertising set is currently not advertising. */ SVCALL(SD_BLE_GAP_ADV_ADDR_GET, uint32_t, sd_ble_gap_adv_addr_get(uint8_t adv_handle, ble_gap_addr_t *p_addr)); diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c index a7ae013dd..c8de8e0f3 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c @@ -62,7 +62,7 @@ Additional information: WrOff == (RdOff - 1): Buffer is full WrOff > RdOff: Free space includes wrap-around WrOff < RdOff: Used space includes wrap-around - (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0): + (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0): Buffer full and wrap-around after next byte @@ -504,7 +504,7 @@ static unsigned _GetAvailWriteSpace(SEGGER_RTT_BUFFER_UP* pRing) { * Reads characters from SEGGER real-time-terminal control block * which have been previously stored by the application. * Do not lock against interrupts and multiple access. -* Used to do the same operation that J-Link does, to transfer +* Used to do the same operation that J-Link does, to transfer * RTT data via other channels, such as TCP/IP or UART. * * Parameters @@ -693,7 +693,7 @@ unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned Buffe * Function description * Reads characters from SEGGER real-time-terminal control block * which have been previously stored by the application. -* Used to do the same operation that J-Link does, to transfer +* Used to do the same operation that J-Link does, to transfer * RTT data via other channels, such as TCP/IP or UART. * * Parameters @@ -708,7 +708,7 @@ unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned Buffe * This function must not be called when J-Link might also do RTT. * This function locks against all other RTT operations. I.e. during * the read operation, writing is also locked. -* If only one consumer reads from the up buffer, +* If only one consumer reads from the up buffer, * call sEGGER_RTT_ReadUpBufferNoLock() instead. */ unsigned SEGGER_RTT_ReadUpBuffer(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) { @@ -766,7 +766,7 @@ unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSiz * Function description * Stores a specified number of characters in SEGGER RTT * control block. -* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application +* SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application * and overwrites data if the data does not fit into the buffer. * * Parameters @@ -779,7 +779,7 @@ unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSiz * (2) For performance reasons this function does not call Init() * and may only be called after RTT has been initialized. * Either by calling SEGGER_RTT_Init() or calling another RTT API function first. -* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link +* (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link * connection reads RTT data. */ void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { @@ -946,7 +946,7 @@ CopyStraight: * Stores a specified number of characters in SEGGER RTT * control block inside a buffer. * SEGGER_RTT_WriteDownBufferNoLock does not lock the application. -* Used to do the same operation that J-Link does, to transfer +* Used to do the same operation that J-Link does, to transfer * RTT data from other channels, such as TCP/IP or UART. * * Parameters @@ -1116,7 +1116,7 @@ unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsig * This function must not be called when J-Link might also do RTT. * This function locks against all other RTT operations. I.e. during * the write operation, writing from the application is also locked. -* If only one consumer writes to the down buffer, +* If only one consumer writes to the down buffer, * call SEGGER_RTT_WriteDownBufferNoLock() instead. */ unsigned SEGGER_RTT_WriteDownBuffer(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) { diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h index 3c04df55f..07eb4f39e 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h @@ -44,7 +44,7 @@ ---------------------------END-OF-HEADER------------------------------ File : SEGGER_RTT.h Purpose : Implementation of SEGGER real-time transfer which allows - real-time communication on targets which support debugger + real-time communication on targets which support debugger memory accesses while the CPU is running. Revision: $Rev: 17697 $ ---------------------------------------------------------------------- diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S b/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S index 78cde4d75..aec372eec 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S @@ -36,9 +36,9 @@ Additional information: #define _THUMB_CODE .code 16 #define _WORD .word #define _SECTION(Sect, Type, AlignExp) .section Sect ##, "ax" - #define _ALIGN(Exp) .align Exp + #define _ALIGN(Exp) .align Exp #define _PLACE_LITS .ltorg - #define _DATA_SECT_START + #define _DATA_SECT_START #define _C_STARTUP _start #define _STACK_END __stack_end__ #define _RAMFUNC @@ -58,7 +58,7 @@ Additional information: #define _THUMB_CODE THUMB #define _WORD DCD #define _SECTION(Sect, Type, AlignExp) SECTION Sect ## : ## Type ## :REORDER:NOROOT ## (AlignExp) - #define _ALIGN(Exp) alignrom Exp + #define _ALIGN(Exp) alignrom Exp #define _PLACE_LITS #define _DATA_SECT_START DATA #define _C_STARTUP __iar_program_start diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h b/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h index 5e79d7e67..fda5a5f51 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h @@ -91,12 +91,12 @@ Revision: $Rev: 18601 $ * * RTT memcpy configuration * -* memcpy() is good for large amounts of data, +* memcpy() is good for large amounts of data, * but the overhead is big for small amounts, which are usually stored via RTT. * With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead. * * SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions. -* This is may be required with memory access restrictions, +* This is may be required with memory access restrictions, * such as on Cortex-A devices with MMU. */ #ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP @@ -105,7 +105,7 @@ Revision: $Rev: 18601 $ // // Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets // -//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) +//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__)) // #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes)) //#endif @@ -204,7 +204,7 @@ Revision: $Rev: 18601 $ : \ : \ ); - + #define SEGGER_RTT_UNLOCK() __asm volatile ("csrr a1, mstatus \n\t" \ "or %0, %0, a1 \n\t" \ "csrs mstatus, %0 \n\t" \ @@ -345,8 +345,8 @@ Revision: $Rev: 18601 $ #define SEGGER_RTT_LOCK() { \ unsigned long LockState; \ LockState = get_psw() & 0x010000; \ - clrpsw_i(); - + clrpsw_i(); + #define SEGGER_RTT_UNLOCK() set_psw(get_psw() | LockState); \ } #endif diff --git a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c index da4a4b5f5..6bf670a02 100644 --- a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c +++ b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c @@ -44,7 +44,7 @@ ---------------------------END-OF-HEADER------------------------------ File : SEGGER_RTT_Syscalls_GCC.c Purpose : Low-level functions for using printf() via RTT in GCC. - To use RTT for printf output, include this file in your + To use RTT for printf output, include this file in your application. Revision: $Rev: 17697 $ ---------------------------------------------------------------------- @@ -62,7 +62,7 @@ Revision: $Rev: 17697 $ ********************************************************************** */ // -// If necessary define the _reent struct +// If necessary define the _reent struct // to match the one passed by the used standard library. // struct _reent; diff --git a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c index f7f5aed48..ba9772d3e 100644 --- a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c +++ b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c @@ -110,7 +110,7 @@ const char __stderr_name[] = "STDERR"; * * Parameters: * c - character to output -* +* */ void _ttywrch(int c) { fputc(c, stdout); // stdout @@ -127,9 +127,9 @@ void _ttywrch(int c) { * Parameters: * sName - sName of the device/file to open * OpenMode - This parameter is currently ignored -* +* * Return value: -* != 0 - Handle to the object to open, otherwise +* != 0 - Handle to the object to open, otherwise * == 0 -"device" is not handled by this module * */ @@ -153,7 +153,7 @@ FILEHANDLE _sys_open(const char * sName, int OpenMode) { * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: * 0 - device/file closed * @@ -176,7 +176,7 @@ int _sys_close(FILEHANDLE hFile) { * pBuffer - Pointer to the data that shall be written * NumBytes - Number of bytes to write * Mode - The Mode that shall be used -* +* * Return value: * Number of bytes *not* written to the file/device * @@ -205,7 +205,7 @@ int _sys_write(FILEHANDLE hFile, const unsigned char * pBuffer, unsigned NumByte * pBuffer - Pointer to buffer to store the read data * NumBytes - Number of bytes to read * Mode - The Mode that shall be used -* +* * Return value: * Number of bytes read from the file/device * @@ -223,12 +223,12 @@ int _sys_read(FILEHANDLE hFile, unsigned char * pBuffer, unsigned NumBytes, int * _sys_istty * * Function description: -* This function shall return whether the opened file +* This function shall return whether the opened file * is a console device or not. * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: * 1 - Device is a console * 0 - Device is not a console @@ -250,10 +250,10 @@ int _sys_istty(FILEHANDLE hFile) { * * Parameters: * hFile - Handle to a file opened via _sys_open -* Pos - -* +* Pos - +* * Return value: -* int - +* int - * */ int _sys_seek(FILEHANDLE hFile, long Pos) { @@ -267,13 +267,13 @@ int _sys_seek(FILEHANDLE hFile, long Pos) { * _sys_ensure * * Function description: -* +* * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: -* int - +* int - * */ int _sys_ensure(FILEHANDLE hFile) { @@ -290,7 +290,7 @@ int _sys_ensure(FILEHANDLE hFile) { * * Parameters: * hFile - Handle to a file opened via _sys_open -* +* * Return value: * Length of the file * @@ -305,17 +305,17 @@ long _sys_flen(FILEHANDLE hFile) { * _sys_tmpnam * * Function description: -* This function converts the file number fileno for a temporary +* This function converts the file number fileno for a temporary * file to a unique filename, for example, tmp0001. * * Parameters: * pBuffer - Pointer to a buffer to store the name * FileNum - file number to convert * MaxLen - Size of the buffer -* +* * Return value: * 1 - Error -* 0 - Success +* 0 - Success * */ int _sys_tmpnam(char * pBuffer, int FileNum, unsigned MaxLen) { @@ -335,7 +335,7 @@ int _sys_tmpnam(char * pBuffer, int FileNum, unsigned MaxLen) { * Parameters: * cmd - Pointer to the command string * len - Length of the string -* +* * Return value: * == NULL - Command was not successfully executed * == sCmd - Command was passed successfully @@ -355,7 +355,7 @@ char * _sys_command_string(char * cmd, int len) { * * Parameters: * ReturnCode - Return code from the main function -* +* * */ void _sys_exit(int ReturnCode) { @@ -373,7 +373,7 @@ void _sys_exit(int ReturnCode) { * * Parameters: * ch - Character to output -* +* * */ int stdout_putchar(int ch) { diff --git a/lib/fatfs/source/00history.txt b/lib/fatfs/source/00history.txt index 7a153a229..f7898cbd9 100644 --- a/lib/fatfs/source/00history.txt +++ b/lib/fatfs/source/00history.txt @@ -366,4 +366,3 @@ R0.15 (November 6, 2022) Fixed f_mkfs() creates broken exFAT volume when the size of volume is >= 2^32 sectors. Fixed string functions cannot write the unicode characters not in BMP when FF_LFN_UNICODE == 2 (UTF-8). Fixed a compatibility issue in identification of GPT header. - diff --git a/lib/fatfs/source/00readme.txt b/lib/fatfs/source/00readme.txt index 3de3aeaa2..48c02a42d 100644 --- a/lib/fatfs/source/00readme.txt +++ b/lib/fatfs/source/00readme.txt @@ -18,4 +18,3 @@ FILES module is only a generic file system layer and it does not depend on any specific storage device. You need to provide a low level disk I/O module written to control the storage device that attached to the target system. - diff --git a/lib/fatfs/source/diskio.c b/lib/fatfs/source/diskio.c index 179e387a2..3cb423db3 100644 --- a/lib/fatfs/source/diskio.c +++ b/lib/fatfs/source/diskio.c @@ -226,4 +226,3 @@ DRESULT disk_ioctl ( return RES_PARERR; } - diff --git a/lib/fatfs/source/ff.c b/lib/fatfs/source/ff.c index 6d412fa0e..05ca02f0a 100644 --- a/lib/fatfs/source/ff.c +++ b/lib/fatfs/source/ff.c @@ -7081,4 +7081,3 @@ FRESULT f_setcp ( return FR_OK; } #endif /* FF_CODE_PAGE == 0 */ - diff --git a/lib/fatfs/source/ffsystem.c b/lib/fatfs/source/ffsystem.c index d5c5134bf..bc0047dce 100644 --- a/lib/fatfs/source/ffsystem.c +++ b/lib/fatfs/source/ffsystem.c @@ -205,4 +205,3 @@ void ff_mutex_give ( } #endif /* FF_FS_REENTRANT */ - diff --git a/lib/networking/dhserver.c b/lib/networking/dhserver.c index 8cd22ddb9..2f14f7a09 100644 --- a/lib/networking/dhserver.c +++ b/lib/networking/dhserver.c @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE @@ -267,7 +267,7 @@ static void udp_recv_proc(void *arg, struct udp_pcb *upcb, struct pbuf *p, const DHCP_OFFER, config->domain, config->dns, - entry->lease, + entry->lease, *netif_ip4_addr(netif), config->router, *netif_ip4_netmask(netif)); @@ -309,7 +309,7 @@ static void udp_recv_proc(void *arg, struct udp_pcb *upcb, struct pbuf *p, const DHCP_ACK, config->domain, config->dns, - entry->lease, + entry->lease, *netif_ip4_addr(netif), config->router, *netif_ip4_netmask(netif)); diff --git a/lib/networking/dhserver.h b/lib/networking/dhserver.h index 2a0b15854..b3642459a 100644 --- a/lib/networking/dhserver.h +++ b/lib/networking/dhserver.h @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE diff --git a/lib/networking/dnserver.c b/lib/networking/dnserver.c index 539cc2cea..6d15fee02 100644 --- a/lib/networking/dnserver.c +++ b/lib/networking/dnserver.c @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE @@ -165,7 +165,7 @@ static void udp_recv_proc(void *arg, struct udp_pcb *upcb, struct pbuf *p, const answer->ttl = htonl(32); answer->len = htons(4); answer->addr = host_addr.addr; - + udp_sendto(upcb, out, addr, port); pbuf_free(out); diff --git a/lib/networking/dnserver.h b/lib/networking/dnserver.h index a062e3aa7..50b29be89 100644 --- a/lib/networking/dnserver.h +++ b/lib/networking/dnserver.h @@ -2,17 +2,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE diff --git a/lib/networking/ndis.h b/lib/networking/ndis.h index 06258e6bb..29b07749c 100644 --- a/lib/networking/ndis.h +++ b/lib/networking/ndis.h @@ -16,14 +16,14 @@ */ /* - * ndis.h - * + * ndis.h + * * Modified by Colin O'Flynn * ntddndis.h modified by Benedikt Spranger - * - * Thanks to the cygwin development team, + * + * Thanks to the cygwin development team, * especially to Casper S. Hornstrup - * + * * THIS SOFTWARE IS NOT COPYRIGHTED * * This source code is offered for use in the public domain. You may diff --git a/lib/networking/rndis_protocol.h b/lib/networking/rndis_protocol.h index b45860eeb..3d07d6fa3 100644 --- a/lib/networking/rndis_protocol.h +++ b/lib/networking/rndis_protocol.h @@ -39,7 +39,7 @@ #ifndef _RNDIS_H #define _RNDIS_H -/** +/** \addtogroup RNDIS @{ */ @@ -112,7 +112,7 @@ typedef struct{ rndis_MinorVersion_t MinorVersion; rndis_MaxTransferSize_t MaxTransferSize; } rndis_initialize_msg_t; - + /* Response: */ typedef struct{ rndis_MessageType_t MessageType; @@ -129,7 +129,7 @@ typedef struct{ rndis_AfListOffset_t AfListOffset; rndis_AfListSize_t AfListSize; } rndis_initialize_cmplt_t; - + /*** Remote NDIS Halt Message ***/ typedef struct{ @@ -137,7 +137,7 @@ typedef struct{ rndis_MessageLength_t MessageLength; rndis_RequestId_t RequestId; } rndis_halt_msg_t; - + typedef uint32_t rndis_Oid_t; typedef uint32_t rndis_InformationBufferLength_t; typedef uint32_t rndis_InformationBufferOffset_t; @@ -153,7 +153,7 @@ typedef struct{ rndis_InformationBufferOffset_t InformationBufferOffset; rndis_DeviceVcHandle_t DeviceVcHandle; } rndis_query_msg_t; - + /* Response: */ typedef struct{ @@ -164,7 +164,7 @@ typedef struct{ rndis_InformationBufferLength_t InformationBufferLength; rndis_InformationBufferOffset_t InformationBufferOffset; } rndis_query_cmplt_t; - + /*** Remote NDIS Set Message ***/ typedef struct{ rndis_MessageType_t MessageType; @@ -175,7 +175,7 @@ typedef struct{ rndis_InformationBufferOffset_t InformationBufferOffset; rndis_DeviceVcHandle_t DeviceVcHandle; } rndis_set_msg_t; - + /* Response */ typedef struct{ rndis_MessageType_t MessageType; @@ -199,9 +199,9 @@ typedef struct{ rndis_ParameterNameLength_t ParameterNameLength; rndis_ParameterType_t ParameterType; rndis_ParameterValueOffset_t ParameterValueOffset; - rndis_ParameterValueLength_t ParameterValueLength; + rndis_ParameterValueLength_t ParameterValueLength; }rndis_config_parameter_t; - + typedef uint32_t rndis_Reserved_t; /*** Remote NDIS Soft Reset Message ***/ @@ -210,7 +210,7 @@ typedef struct{ rndis_MessageLength_t MessageLength; rndis_Reserved_t Reserved; } rndis_reset_msg_t; - + typedef uint32_t rndis_AddressingReset_t; /* Response: */ @@ -220,7 +220,7 @@ typedef struct{ rndis_Status_t Status; rndis_AddressingReset_t AddressingReset; } rndis_reset_cmplt_t; - + /*** Remote NDIS Indicate Status Message ***/ typedef struct{ rndis_MessageType_t MessageType; @@ -229,7 +229,7 @@ typedef struct{ rndis_Status_t StatusBufferLength; rndis_Status_t StatusBufferOffset; } rndis_indicate_status_t; - + typedef uint32_t rndis_DiagStatus_t; typedef uint32_t rndis_ErrorOffset_t; @@ -237,14 +237,14 @@ typedef struct { rndis_DiagStatus_t DiagStatus; rndis_ErrorOffset_t ErrorOffset; }rndis_diagnostic_info_t; - + /*** Remote NDIS Keepalive Message */ typedef struct{ rndis_MessageType_t MessageType; rndis_MessageLength_t MessageLength; rndis_RequestId_t RequestId; }rndis_keepalive_msg_t; - + /* Response: */ typedef struct{ rndis_MessageType_t MessageType; diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index d129466c8..cc14f174c 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -7,17 +7,17 @@ * The MIT License (MIT) * * Copyright (c) 2015 by Sergey Fetisov - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: - * + * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. - * + * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE @@ -45,7 +45,7 @@ static rndis_state_t rndis_state; CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t ndis_report[8] = { 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; -static const uint32_t OIDSupportedList[] = +static const uint32_t OIDSupportedList[] = { OID_GEN_SUPPORTED_LIST, OID_GEN_HARDWARE_STATUS, @@ -203,8 +203,8 @@ static void rndis_handle_set_msg(void) { rndis_packetFilter(oid_packet_filter); rndis_state = rndis_data_initialized; - } - else + } + else { rndis_state = rndis_initialized; } @@ -266,7 +266,7 @@ void rndis_class_set_handler(uint8_t *data, int size) case REMOTE_NDIS_QUERY_MSG: rndis_query(); break; - + case REMOTE_NDIS_SET_MSG: rndis_handle_set_msg(); break; diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index ba497906b..70d431282 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -824,10 +824,10 @@ typedef struct TU_ATTR_PACKED uint8_t type : 2; ///< Request type tusb_request_type_t. uint8_t direction : 1; ///< Direction type. tusb_dir_t } bmRequestType_bit; - + uint8_t bmRequestType; }; - + uint8_t bRequest; ///< Request type audio_cs_req_t uint8_t bChannelNumber; uint8_t bControlSelector; diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index f21dfee64..32ba5761e 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Reinhard Panhuber, Jerzy Kasenberg @@ -1525,7 +1525,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin #endif } } - + } } p_desc = tu_desc_next(p_desc); @@ -2124,7 +2124,7 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 { if (tud_audio_fb_done_cb) tud_audio_fb_done_cb(func_id); - // Schedule a transmit with the new value if EP is not busy + // Schedule a transmit with the new value if EP is not busy if (!usbd_edpt_busy(rhport, audio->ep_fb)) { // Schedule next transmission - value is changed bytud_audio_n_fb_set() in the meantime or the old value gets sent diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 0ef100fa4..7c88b99fc 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Ha Thach (tinyusb.org) @@ -473,7 +473,7 @@ TU_ATTR_WEAK void tud_audio_fb_done_cb(uint8_t func_id); // the choice of format is left to the caller and feedback argument is sent as-is. If CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION is set, then tinyusb // expects 16.16 format and handles the conversion to 10.14 on FS. // -// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and macOS it seems the +// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and macOS it seems the // driver can work with either format. So a good compromise is to keep format correction disabled and stick to 16.16 format. // Feedback value can be determined from within the SOF ISR of the audio driver. This should reduce jitter. If the feature is used, the user can not set the feedback value. diff --git a/src/class/bth/bth_device.h b/src/class/bth/bth_device.h index 1b90d0915..921bd7a1a 100755 --- a/src/class/bth/bth_device.h +++ b/src/class/bth/bth_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index f372fe462..a82ef1d62 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -386,7 +386,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t bool const rts = tu_bit_test(request->wValue, 1); p_cdc->line_state = (uint8_t) request->wValue; - + // Disable fifo overwriting if DTR bit is set tu_fifo_set_overwritable(&p_cdc->tx_ff, !dtr); @@ -433,7 +433,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ if ( ep_addr == p_cdc->ep_out ) { tu_fifo_write_n(&p_cdc->rx_ff, p_cdc->epout_buf, (uint16_t) xferred_bytes); - + // Check for wanted char and invoke callback if needed if ( tud_cdc_rx_wanted_cb && (((signed char) p_cdc->wanted_char) != -1) ) { @@ -445,14 +445,14 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ } } } - + // invoke receive callback (if there is still data) if (tud_cdc_rx_cb && !tu_fifo_empty(&p_cdc->rx_ff) ) tud_cdc_rx_cb(itf); - + // prepare for OUT transaction _prep_out_transaction(p_cdc); } - + // Data sent to host, we continue to fetch from tx fifo to send. // Note: This will cause incorrect baudrate set in line coding. // Though maybe the baudrate is not really important !!! diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index f8a004df4..a6e07aa5c 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_host.h b/src/class/cdc/cdc_host.h index c759527e6..4090d0e9f 100644 --- a/src/class/cdc/cdc_host.h +++ b/src/class/cdc/cdc_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_rndis.h b/src/class/cdc/cdc_rndis.h index e0f129fe3..ad153e0ac 100644 --- a/src/class/cdc/cdc_rndis.h +++ b/src/class/cdc/cdc_rndis.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_rndis_host.c b/src/class/cdc/cdc_rndis_host.c index 44de85b45..41d21bbad 100644 --- a/src/class/cdc/cdc_rndis_host.c +++ b/src/class/cdc/cdc_rndis_host.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/cdc/cdc_rndis_host.h b/src/class/cdc/cdc_rndis_host.h index 447cc4e97..bb431ec1f 100644 --- a/src/class/cdc/cdc_rndis_host.h +++ b/src/class/cdc/cdc_rndis_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/hid/hid.h b/src/class/hid/hid.h index d9b0ead10..fbd3eef38 100644 --- a/src/class/hid/hid.h +++ b/src/class/hid/hid.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/midi/midi.h b/src/class/midi/midi.h index 74dc41749..8b78c6555 100644 --- a/src/class/midi/midi.h +++ b/src/class/midi/midi.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 5dea43431..e3e7826da 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/midi/midi_device.h b/src/class/midi/midi_device.h index 211edc8d1..1c6f996be 100644 --- a/src/class/midi/midi_device.h +++ b/src/class/midi/midi_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/msc/msc.h b/src/class/msc/msc.h index 84b6e4d79..7f25a29ba 100644 --- a/src/class/msc/msc.h +++ b/src/class/msc/msc.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 5839b168d..72f95be06 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index 6724e486c..2fddeb818 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -232,23 +232,23 @@ bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * buffer, uint32_t lba, msc_cbw_t cbw; cbw_init(&cbw, lun); - + cbw.total_bytes = block_count*p_msc->capacity[lun].block_size; cbw.dir = TUSB_DIR_IN_MASK; cbw.cmd_len = sizeof(scsi_read10_t); - + scsi_read10_t const cmd_read10 = { .cmd_code = SCSI_CMD_READ_10, .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - + memcpy(cbw.command, &cmd_read10, cbw.cmd_len); - + return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } - + bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h index 5134b63c2..6c0e5c9dd 100644 --- a/src/class/msc/msc_host.h +++ b/src/class/msc/msc_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index a072bfd79..8ac7cbd01 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Peter Lawrence diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index aa13c9535..9e9580249 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -430,7 +430,7 @@ static void handle_incoming_datagram(uint32_t len) { ncm_interface.num_datagrams++; } - + tud_network_recv_renew(); } diff --git a/src/class/net/net_device.h b/src/class/net/net_device.h index 6e294465b..133689deb 100644 --- a/src/class/net/net_device.h +++ b/src/class/net/net_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Peter Lawrence diff --git a/src/class/usbtmc/usbtmc.h b/src/class/usbtmc/usbtmc.h index fd52d766e..3c5e86d4c 100644 --- a/src/class/usbtmc/usbtmc.h +++ b/src/class/usbtmc/usbtmc.h @@ -316,4 +316,3 @@ typedef struct TU_ATTR_PACKED TU_VERIFY_STATIC(sizeof(usbtmc_read_stb_interrupt_488_t) == 2u, "struct wrong length"); #endif - diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index a4e6eaeb3..8dbda14c5 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -83,7 +83,7 @@ tu_static char logMsg[150]; // Buffer size must be an exact multiple of the max packet size for both // bulk (up to 64 bytes for FS, 512 bytes for HS). In addation, this driver -// imposes a minimum buffer size of 32 bytes. +// imposes a minimum buffer size of 32 bytes. #define USBTMCD_BUFFER_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) /* @@ -598,7 +598,7 @@ bool usbtmcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request uint32_t ep_addr = (request->wIndex); // At this point, a transfer MAY be in progress. Based on USB spec, when clearing bulk EP HALT, - // the EP transfer buffer needs to be cleared and DTOG needs to be reset, even if + // the EP transfer buffer needs to be cleared and DTOG needs to be reset, even if // the EP is not halted. The only USBD API interface to do this is to stall and then un-stall the EP. if(ep_addr == usbtmc_state.ep_bulk_out) { diff --git a/src/class/vendor/vendor_device.h b/src/class/vendor/vendor_device.h index 2bb6afa67..9abafda50 100644 --- a/src/class/vendor/vendor_device.h +++ b/src/class/vendor/vendor_device.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/vendor/vendor_host.c b/src/class/vendor/vendor_host.c index dbea1228d..e66c5007f 100644 --- a/src/class/vendor/vendor_host.c +++ b/src/class/vendor/vendor_host.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/vendor/vendor_host.h b/src/class/vendor/vendor_host.h index 65223fbca..acfebe7a4 100644 --- a/src/class/vendor/vendor_host.h +++ b/src/class/vendor/vendor_host.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 02a490aee..d6e98602b 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji KITAYAMA diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 30478ba6d..1057d7ca3 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -239,7 +239,7 @@ #define TU_BSWAP16(u16) ((unsigned short)_builtin_revw((unsigned long)u16)) #define TU_BSWAP32(u32) (_builtin_revl(u32)) -#else +#else #error "Compiler attribute porting is required" #endif diff --git a/src/common/tusb_timeout.h b/src/common/tusb_timeout.h index ce53955f0..533e67ab8 100644 --- a/src/common/tusb_timeout.h +++ b/src/common/tusb_timeout.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index a52a6d269..12355e8be 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/device/dcd.h b/src/device/dcd.h index 93170732f..00419ff05 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/device/usbd.c b/src/device/usbd.c index 7733cc2e2..0fb236a88 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1398,11 +1398,11 @@ bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep uint8_t const epnum = tu_edpt_number(desc_ep->bEndpointAddress); uint8_t const dir = tu_edpt_dir(desc_ep->bEndpointAddress); - + TU_ASSERT(dcd_edpt_iso_activate); TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX); TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed)); - + _usbd_dev.ep_status[epnum][dir].stalled = false; _usbd_dev.ep_status[epnum][dir].busy = false; _usbd_dev.ep_status[epnum][dir].claimed = false; diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index f860ab0a1..8393d3469 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/host/hcd.h b/src/host/hcd.h index a400626e4..623c12a12 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/host/hub.c b/src/host/hub.c index 3da5358b2..b84042fb6 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -202,7 +202,7 @@ bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_INTERRUPT == desc_ep->bmAttributes.xfer, 0); - + TU_ASSERT(tuh_edpt_open(dev_addr, desc_ep)); hub_interface_t* p_hub = get_itf(dev_addr); diff --git a/src/host/usbh.h b/src/host/usbh.h index 37de7093c..7942de5c2 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal.h b/src/osal/osal.h index afa3826fc..f092e8ffb 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 9393d1f26..477f64892 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 2e2b3c7ce..5f407378e 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index 8b428d642..e6efa0968 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. diff --git a/src/osal/osal_rtx4.h b/src/osal/osal_rtx4.h index dea1c12c8..e443135e0 100644 --- a/src/osal/osal_rtx4.h +++ b/src/osal/osal_rtx4.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Tian Yunhao (t123yh) @@ -115,7 +115,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd os_mbx_declare(_name##__mbox, _depth); \ _declare_box(_name##__pool, sizeof(_type), _depth); \ osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .pool = _name##__pool, .mbox = _name##__mbox }; - + typedef struct { diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index efca5bdcb..95dfda49c 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2021 Bridgetek Pte Ltd @@ -24,15 +24,15 @@ * This file is part of the TinyUSB stack. */ -/* - * Contains code adapted from Bridgetek Pte Ltd via license terms stated +/* + * Contains code adapted from Bridgetek Pte Ltd via license terms stated * in https://brtchip.com/BRTSourceCodeLicenseAgreement */ #include "tusb_option.h" #if CFG_TUD_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X) + (CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X) #include #include @@ -58,7 +58,7 @@ struct ft9xx_xfer_state { volatile uint8_t ready; // OUT Transfer has been received and waiting for transfer. volatile uint8_t valid; // Transfer is pending and total_size, remain_size, and buff_ptr are valid. - + int16_t total_size; // Total transfer size in bytes for this transfer. int16_t remain_size; // Total remaining in transfer. uint8_t *buff_ptr; // Pointer to buffer to transmit from or receive to. @@ -92,7 +92,7 @@ static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len // Manage an OUT transfer from the host. // This can be up-to the maximum packet size of the endpoint. -// Continuation of a transfer beyond the maximum packet size is performed +// Continuation of a transfer beyond the maximum packet size is performed // by the interrupt handler. static uint16_t _ft9xx_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) { @@ -125,7 +125,7 @@ static uint16_t _ft9xx_edpt_xfer_out(uint8_t ep_number, uint8_t *buffer, uint16_ // Manage an IN transfer to the host. // This can be up-to the maximum packet size of the endpoint. -// Continuation of a transfer beyond the maximum packet size is performed +// Continuation of a transfer beyond the maximum packet size is performed // by the interrupt handler. static uint16_t _ft9xx_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t xfer_bytes) { @@ -196,7 +196,7 @@ static uint16_t _ft9xx_edpt_xfer_in(uint8_t ep_number, uint8_t *buffer, uint16_t return xfer_bytes; } -// Reset all non-control endpoints to a default state. +// Reset all non-control endpoints to a default state. // Control endpoint is always enabled and ready. All others disabled. static void _ft9xx_reset_edpts(void) { @@ -208,7 +208,7 @@ static void _ft9xx_reset_edpts(void) // Disable hardware. USBD_EP_CR_REG(i) = 0; } - + // Enable interrupts from USB device control. USBD_REG(cmie) = MASK_USBD_CMIE_ALL; } @@ -319,7 +319,7 @@ static void _dcd_ft9xx_detach(void) } // Determine the speed of the USB to which we are connected. -// Set the speed of the PHY accordingly. +// Set the speed of the PHY accordingly. // High speed can be disabled through CFG_TUSB_RHPORT0_MODE or CFG_TUD_MAX_SPEED settings. static void _ft9xx_usb_speed(void) { @@ -379,16 +379,16 @@ static void _ft9xx_usb_speed(void) } // Send a buffer to the USB IN FIFO. -// When the macro USBD_USE_STREAMS is defined this will stream a buffer of data +// When the macro USBD_USE_STREAMS is defined this will stream a buffer of data // to the FIFO using the most efficient MCU streamout combination. -// If streaming is disabled then it will send each byte of the buffer in turn +// If streaming is disabled then it will send each byte of the buffer in turn // to the FIFO. The is no reason to not stream. // The total number of bytes sent to the FIFO is returned. static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_t length) { uint16_t bytes_read = 0; uint16_t buff_size = length; - + #ifdef USBD_USE_STREAMS volatile uint8_t *data_reg; @@ -423,7 +423,7 @@ static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_ bytes_read = buff_size; } #else // USBD_USE_STREAMS - + bytes_read = buff_size; while (buff_size--) { @@ -438,7 +438,7 @@ static uint16_t _ft9xx_dusb_in(uint8_t ep_number, const uint8_t *buffer, uint16_ // Receive a buffer from the USB OUT FIFO. // When the macro USBD_USE_STREAMS is defined this will stream from the FIFO // to a buffer of data using the most efficient MCU streamin combination. -// If streaming is disabled then it will receive each byte from the FIFO in turn +// If streaming is disabled then it will receive each byte from the FIFO in turn // to the buffer. The is no reason to not stream. // The total number of bytes received from the FIFO is returned. static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t length) @@ -448,7 +448,7 @@ static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len #endif // USBD_USE_STREAMS uint16_t bytes_read = 0; uint16_t buff_size = length; - + if (length > 0) { if (ep_number == USBD_EP_0) @@ -596,7 +596,7 @@ void dcd_remote_wakeup(uint8_t rhport) SYS->MSC0CFG = SYS->MSC0CFG | MASK_SYS_MSC0CFG_DEV_RMWAKEUP; // At least 2 ms of delay needed for RESUME Data K state. - delayms(2); + delayms(2); SYS->MSC0CFG &= ~MASK_SYS_MSC0CFG_DEV_RMWAKEUP; @@ -621,7 +621,7 @@ void dcd_connect(uint8_t rhport) // Determine bus speed and signal speed to tusb. _ft9xx_usb_speed(); } - + // Setup the control endpoint only. #if CFG_TUD_ENDPOINT0_SIZE == 64 USBD_EP_CR_REG(USBD_EP_0) = (USBD_EP0_MAX_SIZE_64 << BIT_USBD_EP0_MAX_SIZE); @@ -702,7 +702,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) TU_LOG1("FT9xx endpoint size not valid: requested %d max 1024\r\n", ep_size); return false; } - // Calculate actual amount of buffer RAM used by this endpoint. This may be more than the + // Calculate actual amount of buffer RAM used by this endpoint. This may be more than the // requested size. ep_buff_size = 8 << ep_reg_size; @@ -714,7 +714,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) if (ep_xfer[ep_number].type != USBD_EP_TYPE_DISABLED) { // This could be because an endpoint has been assigned with the same number. - // On FT9xx, IN and OUT endpoints may not have the same number. e.g. There + // On FT9xx, IN and OUT endpoints may not have the same number. e.g. There // cannot been an 0x81 and 0x01 endpoint. TU_LOG1("FT9xx endpoint %d already assigned\r\n", ep_number); return false; @@ -723,7 +723,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) // Check that there is enough buffer RAM to allocate to this new endpoint. // Available buffer RAM depends on the device revision. // The IN and OUT buffer RAM should be the same size. - if (ep_dir == USBD_DIR_IN) + if (ep_dir == USBD_DIR_IN) total_ram = USBD_RAMTOTAL_IN; else total_ram = USBD_RAMTOTAL_OUT; @@ -753,7 +753,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *ep_desc) if (total_ram < ep_buff_size) { TU_LOG1("FT9xx insufficient buffer RAM for endpoint %d\r\n", ep_number); - return false; + return false; } // Set the type of this endpoint in the control register. @@ -827,7 +827,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to ep_xfer[ep_number].total_size = total_bytes; ep_xfer[ep_number].remain_size = total_bytes; ep_xfer[ep_number].buff_ptr = buffer; - + if (ep_number == USBD_EP_0) { ep_xfer[USBD_EP_0].dir = ep_dir; @@ -876,7 +876,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to // then report the transfer complete with dcd_event_xfer_complete. ep_xfer[ep_number].valid = 1; } - } + } status = true; } else @@ -922,7 +922,7 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) CRITICAL_SECTION_END } -// Clear stall (non-control endpoint), data toggle is also reset to DATA0 +// Clear stall (non-control endpoint), data toggle is also reset to DATA0 void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { uint8_t ep_number = tu_edpt_number(ep_addr); @@ -1025,7 +1025,7 @@ void dcd_int_handler(uint8_t rhport) // Host has sent a SETUP packet. Receive this into the SETUP packet store. _ft9xx_dusb_out(USBD_EP_0, (uint8_t *)_ft9xx_setup_packet, sizeof(USB_device_request)); - + // Send the packet to tinyusb. dcd_event_setup_received(BOARD_TUD_RHPORT, _ft9xx_setup_packet, true); @@ -1046,13 +1046,13 @@ void dcd_int_handler(uint8_t rhport) { xfer_bytes = (uint16_t)ep_xfer[USBD_EP_0].total_size; - // Transfer incoming data from an OUT packet to the buffer supplied. + // Transfer incoming data from an OUT packet to the buffer supplied. if (ep_xfer[USBD_EP_0].dir == TUSB_DIR_OUT) { xfer_bytes = _ft9xx_edpt_xfer_out(USBD_EP_0, ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); } // Now signal completion of data packet. - dcd_event_xfer_complete(BOARD_TUD_RHPORT, USBD_EP_0 | (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), + dcd_event_xfer_complete(BOARD_TUD_RHPORT, USBD_EP_0 | (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); // Incoming FIFO has been cleared. @@ -1097,13 +1097,13 @@ void dcd_int_handler(uint8_t rhport) // Start or continue an OUT transfer. if (ep_xfer[ep_number].dir == TUSB_DIR_OUT) { - xfer_bytes = _ft9xx_edpt_xfer_out(ep_number, - ep_xfer[ep_number].buff_ptr, + xfer_bytes = _ft9xx_edpt_xfer_out(ep_number, + ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); // Report each OUT packet received to the stack. - dcd_event_xfer_complete(BOARD_TUD_RHPORT, - ep_number /* | TUSB_DIR_OUT_MASK */, + dcd_event_xfer_complete(BOARD_TUD_RHPORT, + ep_number /* | TUSB_DIR_OUT_MASK */, xfer_bytes, XFER_RESULT_SUCCESS, true); ep_xfer[ep_number].buff_ptr += xfer_bytes; @@ -1114,8 +1114,8 @@ void dcd_int_handler(uint8_t rhport) { if (ep_xfer[ep_number].remain_size > 0) { - xfer_bytes = _ft9xx_edpt_xfer_in(ep_number, - ep_xfer[ep_number].buff_ptr, + xfer_bytes = _ft9xx_edpt_xfer_in(ep_number, + ep_xfer[ep_number].buff_ptr, (uint16_t)ep_xfer[ep_number].remain_size); ep_xfer[ep_number].buff_ptr += xfer_bytes; @@ -1124,8 +1124,8 @@ void dcd_int_handler(uint8_t rhport) if (ep_xfer[ep_number].remain_size == 0) { - dcd_event_xfer_complete(BOARD_TUD_RHPORT, - ep_number | TUSB_DIR_IN_MASK, + dcd_event_xfer_complete(BOARD_TUD_RHPORT, + ep_number | TUSB_DIR_IN_MASK, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); } } @@ -1151,7 +1151,7 @@ void dcd_int_handler(uint8_t rhport) // once the transfer is initiated. // Strictly this should not happen for a non-control endpoint. Interrupts // are disabled when there are no transfers setup for an endpoint. - ep_xfer[ep_number].ready = 1; + ep_xfer[ep_number].ready = 1; } } } @@ -1159,13 +1159,13 @@ void dcd_int_handler(uint8_t rhport) } } -// Power management interrupt handler. +// Power management interrupt handler. // This handles USB device related power management interrupts only. void ft9xx_usbd_pm_ISR(void) { uint16_t pmcfg = SYS->PMCFG_H; - // Main interrupt handler is responible for + // Main interrupt handler is responible for if (pmcfg & MASK_SYS_PMCFG_DEV_CONN_DEV) { // Signal connection interrupt diff --git a/src/portable/chipidea/ci_hs/ci_hs_type.h b/src/portable/chipidea/ci_hs/ci_hs_type.h index 728a86b86..31b5a012d 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_type.h +++ b/src/portable/chipidea/ci_hs/ci_hs_type.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 5bccf81a7..bc6736cf2 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -545,7 +545,7 @@ static void process_edpt_complete_isr(uint8_t rhport, uint8_t epnum, uint8_t dir tu_fifo_advance_write_pointer(p_qhd->ff, xferred_bytes); } } - + // only number of bytes in the IOC qtd dcd_event_xfer_complete(rhport, tu_edpt_addr(epnum, dir), xferred_bytes, result, true); } diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index d0396daea..d607627b4 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 7140897a1..ee9dfb11f 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -566,7 +566,7 @@ static void period_list_xfer_complete_isr(uint8_t hostid, uint32_t interval_ms) case EHCI_QTYPE_ITD: // TODO support hs/fs ISO case EHCI_QTYPE_SITD: case EHCI_QTYPE_FSTN: - + default: break; } @@ -683,7 +683,7 @@ void hcd_int_handler(uint8_t rhport) uint32_t int_status = regs->status; int_status &= regs->inten; - + regs->status = int_status; // Acknowledge handled interrupt if (int_status == 0) return; diff --git a/src/portable/espressif/esp32sx/dcd_esp32sx.c b/src/portable/espressif/esp32sx/dcd_esp32sx.c index 41240f737..1fcfb6241 100644 --- a/src/portable/espressif/esp32sx/dcd_esp32sx.c +++ b/src/portable/espressif/esp32sx/dcd_esp32sx.c @@ -874,4 +874,3 @@ void dcd_int_disable (uint8_t rhport) } #endif // #if OPT_MCU_ESP32S2 || OPT_MCU_ESP32S3 - diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index 0ba53d4d0..487761847 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji KITAYAMA @@ -572,7 +572,7 @@ static void process_bus_reset(uint8_t rhport) _dcd.pipe0.buf = NULL; USB0->TXIE = 1; /* Enable only EP0 */ - USB0->RXIE = 0; + USB0->RXIE = 0; /* Clear FIFO settings */ for (unsigned i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) { @@ -722,7 +722,7 @@ void dcd_edpt_close_all(uint8_t rhport) unsigned const ie = NVIC_GetEnableIRQ(USB0_IRQn); NVIC_DisableIRQ(USB0_IRQn); USB0->TXIE = 1; /* Enable only EP0 */ - USB0->RXIE = 0; + USB0->RXIE = 0; for (unsigned i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) { regs->TXMAXP = 0; regs->TXCSRH = 0; @@ -854,7 +854,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) if (tu_edpt_dir(ep_addr)) { /* IN */ regs->TXCSRL = USB_TXCSRL1_CLRDT; } else { /* OUT */ - regs->RXCSRL = USB_RXCSRL1_CLRDT; + regs->RXCSRL = USB_RXCSRL1_CLRDT; } if (ie) NVIC_EnableIRQ(USB0_IRQn); } diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 85e18e3aa..9eb2e005e 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji KITAYAMA @@ -588,7 +588,7 @@ void hcd_int_disable(uint8_t rhport) uint32_t hcd_frame_number(uint8_t rhport) { (void)rhport; - /* The device must be reset at least once after connection + /* The device must be reset at least once after connection * in order to start the frame counter. */ if (_hcd.need_reset) hcd_port_reset(rhport); return USB0->FRAME; diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 6cf0e6285..6986c8317 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Koji Kitayama @@ -486,7 +486,7 @@ void dcd_init(uint8_t rhport) #else U1PWRCbits.USBPWR = 1; #endif - + #if TU_PIC_INT_SIZE == 4 uint32_t bdt_phys = KVA_TO_PA((uintptr_t)_dcd.bdt); diff --git a/src/portable/microchip/pic32mz/usbhs_registers.h b/src/portable/microchip/pic32mz/usbhs_registers.h index 93b552322..03fe78bbd 100644 --- a/src/portable/microchip/pic32mz/usbhs_registers.h +++ b/src/portable/microchip/pic32mz/usbhs_registers.h @@ -21,7 +21,7 @@ * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE. *******************************************************************************/ /******************************************************************************* - USBHS Peripheral Library Register Definitions + USBHS Peripheral Library Register Definitions File Name: usbhs_registers.h @@ -50,16 +50,16 @@ #define USBHS_REG_INTRRX 0x004 #define USBHS_REG_INTRTXE 0x006 #define USBHS_REG_INTRRXE 0x008 -#define USBHS_REG_INTRUSB 0x00A -#define USBHS_REG_INTRUSBE 0x00B +#define USBHS_REG_INTRUSB 0x00A +#define USBHS_REG_INTRUSBE 0x00B #define USBHS_REG_FRAME 0x00C #define USBHS_REG_INDEX 0x00E #define USBHS_REG_TESTMODE 0x00F /******************************************************* - * Endpoint Control Status Registers (CSR). These values + * Endpoint Control Status Registers (CSR). These values * should be added to either the 0x10 to access the - * register through Indexed CSR. To access the actual + * register through Indexed CSR. To access the actual * CSR, see ahead in this header file. ******************************************************/ @@ -99,20 +99,20 @@ #define USBHS_EP_DEVICE_RX_SEND_STALL 0x20 /* FADDR - Device Function Address */ -typedef union +typedef union { - struct __attribute__((packed)) + struct __attribute__((packed)) { unsigned FUNC:7; unsigned :1; }; - uint8_t w; + uint8_t w; } __USBHS_FADDR_t; /* POWER - Control Resume and Suspend signalling */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -126,14 +126,14 @@ typedef union unsigned ISOUPD:1; }; struct - { + { uint8_t w; }; } __USBHS_POWER_t; /* INTRTXE - Transmit endpoint interrupt enable */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -155,7 +155,7 @@ typedef union } __USBHS_INTRTXE_t; /* INTRRXE - Receive endpoint interrupt enable */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -198,7 +198,7 @@ typedef union } __USBHS_INTRUSBE_t; /* FRAME - Frame number */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -213,7 +213,7 @@ typedef union } __USBHS_FRAME_t; /* INDEX - Endpoint index */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -228,7 +228,7 @@ typedef union } __USBHS_INDEX_t; /* TESTMODE - Test mode register */ -typedef union +typedef union { struct __attribute__((packed)) { @@ -248,7 +248,7 @@ typedef union } __USBHS_TESTMODE_t; -/* COUNT0 - Indicates the amount of data received in endpoint 0 */ +/* COUNT0 - Indicates the amount of data received in endpoint 0 */ typedef union { struct __attribute__((packed)) @@ -627,7 +627,7 @@ typedef union }; uint16_t w; -} __USBHS_TXMAXP_t; +} __USBHS_TXMAXP_t; /* TXFIFOSZ - Size of the transmit endpoint FIFO */ typedef struct __attribute__((packed)) @@ -781,7 +781,7 @@ typedef union } __USBHS_DMACNTL_t; -/* Endpoint Control and Status Register Set */ +/* Endpoint Control and Status Register Set */ typedef struct __attribute__((packed)) { volatile __USBHS_TXMAXP_t TXMAXPbits; @@ -906,7 +906,7 @@ typedef struct __attribute__((aligned(4),packed)) volatile __USBHS_TXFIFOADD_t TXFIFOADDbits; volatile __USBHS_RXFIFOADD_t RXFIFOADDbits; - + volatile uint32_t VCONTROL; volatile uint16_t HWVERS; volatile uint8_t padding1[10]; @@ -923,7 +923,7 @@ typedef struct __attribute__((aligned(4),packed)) volatile __USBHS_TARGET_ADDR_t TADDR[16]; volatile __USBHS_EPCSR_t EPCSR[16]; volatile uint32_t DMA_INTR; - volatile __USBHS_DMA_CHANNEL_t DMA_CHANNEL[8]; + volatile __USBHS_DMA_CHANNEL_t DMA_CHANNEL[8]; volatile uint32_t RQPKTXOUNT[16]; } usbhs_registers_t; diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index 814e680fb..e3fa51e31 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/src/portable/microchip/samx7x/common_usb_regs.h b/src/portable/microchip/samx7x/common_usb_regs.h index d232f0bcb..db4a81e0e 100644 --- a/src/portable/microchip/samx7x/common_usb_regs.h +++ b/src/portable/microchip/samx7x/common_usb_regs.h @@ -2007,7 +2007,7 @@ /** \brief DEVDMA hardware registers */ typedef struct -{ +{ __IO uint32_t DEVDMANXTDSC; /**< (DEVDMA Offset: 0x00) Device DMA Channel Next Descriptor Address Register */ __IO uint32_t DEVDMAADDRESS; /**< (DEVDMA Offset: 0x04) Device DMA Channel Address Register */ __IO uint32_t DEVDMACONTROL; /**< (DEVDMA Offset: 0x08) Device DMA Channel Control Register */ @@ -2016,7 +2016,7 @@ typedef struct /** \brief HSTDMA hardware registers */ typedef struct -{ +{ __IO uint32_t HSTDMANXTDSC; /**< (HSTDMA Offset: 0x00) Host DMA Channel Next Descriptor Address Register */ __IO uint32_t HSTDMAADDRESS; /**< (HSTDMA Offset: 0x04) Host DMA Channel Address Register */ __IO uint32_t HSTDMACONTROL; /**< (HSTDMA Offset: 0x08) Host DMA Channel Control Register */ @@ -2025,7 +2025,7 @@ typedef struct /** \brief USBHS hardware registers */ typedef struct -{ +{ __IO uint32_t DEVCTRL; /**< (USBHS Offset: 0x00) Device General Control Register */ __I uint32_t DEVISR; /**< (USBHS Offset: 0x04) Device Global Interrupt Status Register */ __O uint32_t DEVICR; /**< (USBHS Offset: 0x08) Device Global Interrupt Clear Register */ diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 24657872b..2bbb345d6 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -241,7 +241,7 @@ static void dcd_ep_handler(uint8_t ep_ix) if (int_status & DEVEPTISR_RXOUTI) { uint8_t *ptr = EP_GET_FIFO_PTR(0,8); - + if (count && xfer->total_len) { uint16_t remain = xfer->total_len - xfer->queued_len; @@ -252,7 +252,7 @@ static void dcd_ep_handler(uint8_t ep_ix) if (xfer->buffer) { memcpy(xfer->buffer + xfer->queued_len, ptr, count); - } else + } else { tu_fifo_write_n(xfer->fifo, ptr, count); } @@ -281,7 +281,7 @@ static void dcd_ep_handler(uint8_t ep_ix) { // TX not complete dcd_transmit_packet(xfer, 0); - } else + } else { // TX complete dcd_event_xfer_complete(0, 0x80 + 0, xfer->total_len, XFER_RESULT_SUCCESS, true); @@ -292,7 +292,7 @@ static void dcd_ep_handler(uint8_t ep_ix) } } } - } else + } else { if (int_status & DEVEPTISR_RXOUTI) { @@ -333,7 +333,7 @@ static void dcd_ep_handler(uint8_t ep_ix) { // TX not complete dcd_transmit_packet(xfer, ep_ix); - } else + } else { // TX complete dcd_event_xfer_complete(0, 0x80 + ep_ix, xfer->total_len, XFER_RESULT_SUCCESS, true); @@ -359,7 +359,7 @@ static void dcd_dma_handler(uint8_t ep_ix) if(USB_REG->DEVEPTCFG[ep_ix] & DEVEPTCFG_EPDIR) { dcd_event_xfer_complete(0, 0x80 + ep_ix, count, XFER_RESULT_SUCCESS, true); - } else + } else { dcd_event_xfer_complete(0, ep_ix, count, XFER_RESULT_SUCCESS, true); } @@ -507,12 +507,12 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) // Enable Endpoint 0 Interrupts USB_REG->DEVIER = DEVIER_PEP_0; return true; - } else + } else { // Endpoint configuration is not successful return false; } - } else + } else { // Enable the endpoint USB_REG->DEVEPT |= ((0x01 << epnum) << DEVEPT_EPEN0_Pos); @@ -544,7 +544,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) { USB_REG->DEVIER = ((0x01 << epnum) << DEVIER_PEP_0_Pos); return true; - } else + } else { // Endpoint configuration is not successful return false; @@ -583,7 +583,7 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix) { memcpy(ptr, xfer->buffer + xfer->queued_len, len); } - else + else { tu_fifo_read_n(xfer->fifo, ptr, len); } @@ -595,7 +595,7 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix) { // Control endpoint: clear the interrupt flag to send the data USB_REG->DEVEPTICR[0] = DEVEPTICR_TXINIC; - } else + } else { // Other endpoint types: clear the FIFO control flag to send the data USB_REG->DEVEPTIDR[ep_ix] = DEVEPTIDR_FIFOCONC; @@ -616,7 +616,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t xfer->total_len = total_bytes; xfer->queued_len = 0; xfer->fifo = NULL; - + if (EP_DMA_SUPPORT(epnum) && total_bytes != 0) { // Force the CPU to flush the buffer. We increase the size by 32 because the call aligns the @@ -648,12 +648,12 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // and the DMA transfer must be not started. // It is the end of transfer return false; - } else + } else { if (dir == TUSB_DIR_OUT) { USB_REG->DEVEPTIER[epnum] = DEVEPTIER_RXOUTES; - } else + } else { dcd_transmit_packet(xfer,epnum); } @@ -701,20 +701,20 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 // Clean invalidate cache of linear part CleanInValidateCache((uint32_t*) tu_align((uint32_t) info.ptr_lin, 4), info.len_lin + 31); - + USB_REG->DEVDMA[epnum - 1].DEVDMAADDRESS = (uint32_t)info.ptr_lin; if (info.len_wrap) { // Clean invalidate cache of wrapped part CleanInValidateCache((uint32_t*) tu_align((uint32_t) info.ptr_wrap, 4), info.len_wrap + 31); - + dma_desc[epnum - 1].next_desc = 0; dma_desc[epnum - 1].buff_addr = (uint32_t)info.ptr_wrap; dma_desc[epnum - 1].chnl_ctrl = udd_dma_ctrl_wrap | (info.len_wrap << DEVDMACONTROL_BUFF_LENGTH_Pos); // Clean cache of wrapped DMA descriptor CleanInValidateCache((uint32_t*)&dma_desc[epnum - 1], sizeof(dma_desc_t)); - + udd_dma_ctrl_lin |= DEVDMASTATUS_DESC_LDST; USB_REG->DEVDMA[epnum - 1].DEVDMANXTDSC = (uint32_t)&dma_desc[epnum - 1]; } else { @@ -743,7 +743,7 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 if (dir == TUSB_DIR_OUT) { USB_REG->DEVEPTIER[epnum] = DEVEPTIER_RXOUTES; - } else + } else { dcd_transmit_packet(xfer,epnum); } diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 4aeb85fc0..eee5686f4 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c index 2fdc05f36..fb12122e0 100644 --- a/src/portable/nuvoton/nuc120/dcd_nuc120.c +++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c @@ -27,9 +27,9 @@ /* Theory of operation: - The NUC100/NUC120 USBD peripheral has six "EP"s, but each is simplex, - so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to - implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for + The NUC100/NUC120 USBD peripheral has six "EP"s, but each is simplex, + so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to + implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for EP0_IN and EP0_OUT respectively. This leaves up to four for user usage. */ diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c index a56b5f8e8..873b1b7ef 100644 --- a/src/portable/nuvoton/nuc121/dcd_nuc121.c +++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c @@ -27,9 +27,9 @@ /* Theory of operation: - The NUC121/NUC125/NUC126 USBD peripheral has eight "EP"s, but each is simplex, - so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to - implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for + The NUC121/NUC125/NUC126 USBD peripheral has eight "EP"s, but each is simplex, + so two collectively (peripheral nomenclature of "EP0" and "EP1") are needed to + implement USB EP0. PERIPH_EP0 and PERIPH_EP1 are used by this driver for EP0_IN and EP0_OUT respectively. This leaves up to six for user usage. */ diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index 3fa7c1ec1..3a92c9794 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -27,9 +27,9 @@ /* Theory of operation: - The NUC505 USBD peripheral has twelve "EP"s, where each is simplex, in addition + The NUC505 USBD peripheral has twelve "EP"s, where each is simplex, in addition to dedicated support for the control endpoint (EP0). The non-user endpoints - are referred to as "user" EPs in this code, and follow the datasheet + are referred to as "user" EPs in this code, and follow the datasheet nomenclature of EPA through EPL. */ @@ -389,7 +389,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to while (total_bytes < USBD->CEPRXCNT); for (int count = 0; count < total_bytes; count++) *buffer++ = USBD->CEPDAT_BYTE; - + dcd_event_xfer_complete(0, ep_addr, total_bytes, XFER_RESULT_SUCCESS, true); } } diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 13eb105cd..b6daec3de 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Koji Kitayama @@ -296,7 +296,7 @@ void dcd_int_disable(uint8_t rhport) void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { - _dcd.addr = dev_addr & 0x7F; + _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); } @@ -528,7 +528,7 @@ void dcd_int_handler(uint8_t rhport) if (is & USB_ISTAT_SLEEP_MASK) { // TU_LOG2("Suspend: "); TU_LOG2_HEX(is); - // Note Host usually has extra delay after bus reset (without SOF), which could falsely + // Note Host usually has extra delay after bus reset (without SOF), which could falsely // detected as Sleep event. Though usbd has debouncing logic so we are good KHCI->ISTAT = USB_ISTAT_SLEEP_MASK; process_bus_sleep(rhport); diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 0f5fa6275..35763f121 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Koji Kitayama @@ -414,7 +414,7 @@ void hcd_int_disable(uint8_t rhport) uint32_t hcd_frame_number(uint8_t rhport) { (void)rhport; - /* The device must be reset at least once after connection + /* The device must be reset at least once after connection * in order to start the frame counter. */ if (_hcd.need_reset) hcd_port_reset(rhport); uint32_t frmnum = KHCI->FRMNUML; diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 0894a5eeb..86149afd8 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.h b/src/portable/nxp/lpc17_40/dcd_lpc17_40.h index 07daa32e4..654b80866 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.h +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c b/src/portable/nxp/lpc17_40/hcd_lpc17_40.c index ad9ed59b4..372dcf51f 100644 --- a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/hcd_lpc17_40.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) @@ -44,4 +44,3 @@ void hcd_int_disable(uint8_t rhport) } #endif - diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 124656307..5368ef868 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -373,7 +373,7 @@ void dcd_edpt_close_all (uint8_t rhport) void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { (void) rhport; - + uint8_t ep_id = ep_addr2id(ep_addr); _dcd.ep[ep_id][0].cmd_sts.active = _dcd.ep[ep_id][0].cmd_sts.active = 0; // TODO proper way is to EPSKIP then wait ep[][].active then write ep[][].disable (see table 778 in LPC55S69 Use Manual) _dcd.ep[ep_id][0].cmd_sts.disable = _dcd.ep[ep_id][1].cmd_sts.disable = 1; @@ -426,7 +426,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to static void bus_reset(uint8_t rhport) { tu_memclr(&_dcd, sizeof(dcd_data_t)); - edpt_reset_all(rhport); + edpt_reset_all(rhport); // disable all endpoints as specified by LPC55S69 UM Table 778 for(uint8_t ep_id = 0; ep_id < 2*MAX_EP_PAIRS; ep_id++) @@ -575,4 +575,3 @@ void dcd_int_handler(uint8_t rhport) } #endif - diff --git a/src/portable/nxp/transdimension/common_transdimension.h b/src/portable/nxp/transdimension/common_transdimension.h index 69074de41..95ae1903e 100644 --- a/src/portable/nxp/transdimension/common_transdimension.h +++ b/src/portable/nxp/transdimension/common_transdimension.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/src/portable/nxp/transdimension/dcd_transdimension.c b/src/portable/nxp/transdimension/dcd_transdimension.c index 1f27a6872..983d7cfcf 100644 --- a/src/portable/nxp/transdimension/dcd_transdimension.c +++ b/src/portable/nxp/transdimension/dcd_transdimension.c @@ -569,7 +569,7 @@ static void process_edpt_complete_isr(uint8_t rhport, uint8_t epnum, uint8_t dir tu_fifo_advance_write_pointer(p_qhd->ff, xferred_bytes); } } - + // only number of bytes in the IOC qtd dcd_event_xfer_complete(rhport, tu_edpt_addr(epnum, dir), xferred_bytes, result, true); } diff --git a/src/portable/nxp/transdimension/hcd_transdimension.c b/src/portable/nxp/transdimension/hcd_transdimension.c index 392764ff6..0b3e9e4ef 100644 --- a/src/portable/nxp/transdimension/hcd_transdimension.c +++ b/src/portable/nxp/transdimension/hcd_transdimension.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index b615743b8..260804d3d 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -715,4 +715,3 @@ void hcd_int_handler(uint8_t hostid) #endif - diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 1bc5594d8..e6daf6827 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.h b/src/portable/raspberrypi/rp2040/rp2040_usb.h index a06407f23..9f8e58d42 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.h +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.h @@ -47,7 +47,7 @@ typedef struct hw_endpoint { // Is this a valid struct bool configured; - + // Transfer direction (i.e. IN is rx for host but tx for device) // allows us to common up transfer functions bool rx; diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index e49c0b52e..1677cfa12 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Nathan Conrad @@ -181,7 +181,7 @@ static void dcd_handle_bus_reset(void); static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix); static void dcd_ep_ctr_handler(void); -// PMA allocation/access +// PMA allocation/access static uint8_t open_ep_count; static uint16_t ep_buf_ptr; ///< Points to first free memory location static void dcd_pma_alloc_reset(void); @@ -249,7 +249,7 @@ void dcd_init (uint8_t rhport) asm("NOP"); } USB->CNTR = 0; // Enable USB - + USB->BTABLE = DCD_STM32_BTABLE_BASE; USB->ISTR = 0; // Clear pending interrupts @@ -263,7 +263,7 @@ void dcd_init (uint8_t rhport) USB->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; dcd_handle_bus_reset(); - + // Enable pull-up if supported if ( dcd_connect ) dcd_connect(rhport); } @@ -464,12 +464,12 @@ static void dcd_handle_bus_reset(void) //__IO uint16_t * const epreg = &(EPREG(0)); USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag - + for(uint32_t i=0; iep_idx = ep_idx; pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); - + *pcd_ep_tx_address_ptr(USB, ep_idx) = pma_addr; *pcd_ep_rx_address_ptr(USB, ep_idx) = pma_addr; - + return true; } @@ -1035,7 +1035,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo { pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); } - + pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); // Be normal, for now, instead of only accepting zero-byte packets (on control endpoint) // or being double-buffered (bulk endpoints) @@ -1250,11 +1250,11 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t * ff, uint16_t dst, uint16_t wN { // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies tu_fifo_buffer_info_t info; - tu_fifo_get_read_info(ff, &info); - + tu_fifo_get_read_info(ff, &info); + uint16_t cnt_lin = TU_MIN(wNBytes, info.len_lin); uint16_t cnt_wrap = TU_MIN(wNBytes - cnt_lin, info.len_wrap); - + // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, // last lin byte will be combined with wrapped part // To ensure PMA is always access 16bit aligned (dst aligned to 16 bit) @@ -1352,7 +1352,7 @@ static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNB // Copy last linear byte & first wrapped byte uint16_t tmp; dcd_read_packet_memory(&tmp, src, 2); - + ((uint8_t*)info.ptr_lin)[cnt_lin - 1] = (uint8_t)tmp; ((uint8_t*)info.ptr_wrap)[0] = (uint8_t)(tmp >> 8U); src += 2; @@ -1379,4 +1379,3 @@ static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNB } #endif - diff --git a/src/portable/st/synopsys/synopsys_common.h b/src/portable/st/synopsys/synopsys_common.h index 6f0602fe9..ce3195b23 100644 --- a/src/portable/st/synopsys/synopsys_common.h +++ b/src/portable/st/synopsys/synopsys_common.h @@ -2,15 +2,15 @@ ****************************************************************************** * @file synopsys_common.h * @author MCD Application Team - * @brief CMSIS Cortex-M3 Device USB OTG peripheral Header File. - * This file contains the USB OTG peripheral register's definitions, bits + * @brief CMSIS Cortex-M3 Device USB OTG peripheral Header File. + * This file contains the USB OTG peripheral register's definitions, bits * definitions and memory mapping for STM32F1xx devices. - * + * * This file contains: * - Data structures and the address mapping for the USB OTG peripheral * - The Peripheral's registers declarations and bits definition * - Macros to access the peripheral's registers hardware - * + * ****************************************************************************** * @attention * @@ -40,7 +40,7 @@ #define __OM volatile #define __IOM volatile -/** +/** * @brief __USB_OTG_Core_register */ @@ -66,11 +66,11 @@ typedef struct __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO Address offset: 0x104 */ } USB_OTG_GlobalTypeDef; -/** +/** * @brief __device_Registers */ -typedef struct +typedef struct { __IO uint32_t DCFG; /*!< dev Configuration Register Address offset: 800h*/ __IO uint32_t DCTL; /*!< dev Control Register Address offset: 804h*/ @@ -87,18 +87,18 @@ typedef struct __IO uint32_t DTHRCTL; /*!< dev thr Address offset: 830h*/ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset: 834h*/ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset: 838h*/ - __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset: 83Ch*/ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset: 83Ch*/ uint32_t Reserved40; /*!< dedicated EP mask Address offset: 840h*/ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset: 844h*/ uint32_t Reserved44[15]; /*!< Reserved 844-87Ch*/ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset: 884h*/ } USB_OTG_DeviceTypeDef; -/** +/** * @brief __IN_Endpoint-Specific_Register */ -typedef struct +typedef struct { __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h*/ uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h*/ @@ -110,11 +110,11 @@ typedef struct uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch*/ } USB_OTG_INEndpointTypeDef; -/** +/** * @brief __OUT_Endpoint-Specific_Registers */ -typedef struct +typedef struct { __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/ uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h*/ @@ -125,11 +125,11 @@ typedef struct uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/ } USB_OTG_OUTEndpointTypeDef; -/** +/** * @brief __Host_Mode_Register_Structures */ -typedef struct +typedef struct { __IO uint32_t HCFG; /*!< Host Configuration Register 400h*/ __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h*/ @@ -140,7 +140,7 @@ typedef struct __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h*/ } USB_OTG_HostTypeDef; -/** +/** * @brief __Host_Channel_Specific_Registers */ @@ -177,60 +177,60 @@ typedef struct /* */ /******************************************************************************/ /******************** Bit definition for USB_OTG_GOTGCTL register ***********/ -#define USB_OTG_GOTGCTL_SRQSCS_Pos (0U) +#define USB_OTG_GOTGCTL_SRQSCS_Pos (0U) #define USB_OTG_GOTGCTL_SRQSCS_Msk (0x1UL << USB_OTG_GOTGCTL_SRQSCS_Pos) /*!< 0x00000001 */ #define USB_OTG_GOTGCTL_SRQSCS USB_OTG_GOTGCTL_SRQSCS_Msk /*!< Session request success */ -#define USB_OTG_GOTGCTL_SRQ_Pos (1U) +#define USB_OTG_GOTGCTL_SRQ_Pos (1U) #define USB_OTG_GOTGCTL_SRQ_Msk (0x1UL << USB_OTG_GOTGCTL_SRQ_Pos) /*!< 0x00000002 */ #define USB_OTG_GOTGCTL_SRQ USB_OTG_GOTGCTL_SRQ_Msk /*!< Session request */ -#define USB_OTG_GOTGCTL_HNGSCS_Pos (8U) +#define USB_OTG_GOTGCTL_HNGSCS_Pos (8U) #define USB_OTG_GOTGCTL_HNGSCS_Msk (0x1UL << USB_OTG_GOTGCTL_HNGSCS_Pos) /*!< 0x00000100 */ #define USB_OTG_GOTGCTL_HNGSCS USB_OTG_GOTGCTL_HNGSCS_Msk /*!< Host set HNP enable */ -#define USB_OTG_GOTGCTL_HNPRQ_Pos (9U) +#define USB_OTG_GOTGCTL_HNPRQ_Pos (9U) #define USB_OTG_GOTGCTL_HNPRQ_Msk (0x1UL << USB_OTG_GOTGCTL_HNPRQ_Pos) /*!< 0x00000200 */ #define USB_OTG_GOTGCTL_HNPRQ USB_OTG_GOTGCTL_HNPRQ_Msk /*!< HNP request */ -#define USB_OTG_GOTGCTL_HSHNPEN_Pos (10U) +#define USB_OTG_GOTGCTL_HSHNPEN_Pos (10U) #define USB_OTG_GOTGCTL_HSHNPEN_Msk (0x1UL << USB_OTG_GOTGCTL_HSHNPEN_Pos) /*!< 0x00000400 */ #define USB_OTG_GOTGCTL_HSHNPEN USB_OTG_GOTGCTL_HSHNPEN_Msk /*!< Host set HNP enable */ -#define USB_OTG_GOTGCTL_DHNPEN_Pos (11U) +#define USB_OTG_GOTGCTL_DHNPEN_Pos (11U) #define USB_OTG_GOTGCTL_DHNPEN_Msk (0x1UL << USB_OTG_GOTGCTL_DHNPEN_Pos) /*!< 0x00000800 */ #define USB_OTG_GOTGCTL_DHNPEN USB_OTG_GOTGCTL_DHNPEN_Msk /*!< Device HNP enabled */ -#define USB_OTG_GOTGCTL_CIDSTS_Pos (16U) +#define USB_OTG_GOTGCTL_CIDSTS_Pos (16U) #define USB_OTG_GOTGCTL_CIDSTS_Msk (0x1UL << USB_OTG_GOTGCTL_CIDSTS_Pos) /*!< 0x00010000 */ #define USB_OTG_GOTGCTL_CIDSTS USB_OTG_GOTGCTL_CIDSTS_Msk /*!< Connector ID status */ -#define USB_OTG_GOTGCTL_DBCT_Pos (17U) +#define USB_OTG_GOTGCTL_DBCT_Pos (17U) #define USB_OTG_GOTGCTL_DBCT_Msk (0x1UL << USB_OTG_GOTGCTL_DBCT_Pos) /*!< 0x00020000 */ #define USB_OTG_GOTGCTL_DBCT USB_OTG_GOTGCTL_DBCT_Msk /*!< Long/short debounce time */ -#define USB_OTG_GOTGCTL_ASVLD_Pos (18U) +#define USB_OTG_GOTGCTL_ASVLD_Pos (18U) #define USB_OTG_GOTGCTL_ASVLD_Msk (0x1UL << USB_OTG_GOTGCTL_ASVLD_Pos) /*!< 0x00040000 */ #define USB_OTG_GOTGCTL_ASVLD USB_OTG_GOTGCTL_ASVLD_Msk /*!< A-session valid */ -#define USB_OTG_GOTGCTL_BSVLD_Pos (19U) +#define USB_OTG_GOTGCTL_BSVLD_Pos (19U) #define USB_OTG_GOTGCTL_BSVLD_Msk (0x1UL << USB_OTG_GOTGCTL_BSVLD_Pos) /*!< 0x00080000 */ #define USB_OTG_GOTGCTL_BSVLD USB_OTG_GOTGCTL_BSVLD_Msk /*!< B-session valid */ /******************** Bit definition for USB_OTG_HCFG register ********************/ -#define USB_OTG_HCFG_FSLSPCS_Pos (0U) +#define USB_OTG_HCFG_FSLSPCS_Pos (0U) #define USB_OTG_HCFG_FSLSPCS_Msk (0x3UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000003 */ #define USB_OTG_HCFG_FSLSPCS USB_OTG_HCFG_FSLSPCS_Msk /*!< FS/LS PHY clock select */ #define USB_OTG_HCFG_FSLSPCS_0 (0x1UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000001 */ #define USB_OTG_HCFG_FSLSPCS_1 (0x2UL << USB_OTG_HCFG_FSLSPCS_Pos) /*!< 0x00000002 */ -#define USB_OTG_HCFG_FSLSS_Pos (2U) +#define USB_OTG_HCFG_FSLSS_Pos (2U) #define USB_OTG_HCFG_FSLSS_Msk (0x1UL << USB_OTG_HCFG_FSLSS_Pos) /*!< 0x00000004 */ #define USB_OTG_HCFG_FSLSS USB_OTG_HCFG_FSLSS_Msk /*!< FS- and LS-only support */ /******************** Bit definition for USB_OTG_DCFG register ********************/ -#define USB_OTG_DCFG_DSPD_Pos (0U) +#define USB_OTG_DCFG_DSPD_Pos (0U) #define USB_OTG_DCFG_DSPD_Msk (0x3UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000003 */ #define USB_OTG_DCFG_DSPD USB_OTG_DCFG_DSPD_Msk /*!< Device speed */ #define USB_OTG_DCFG_DSPD_0 (0x1UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000001 */ #define USB_OTG_DCFG_DSPD_1 (0x2UL << USB_OTG_DCFG_DSPD_Pos) /*!< 0x00000002 */ -#define USB_OTG_DCFG_NZLSOHSK_Pos (2U) +#define USB_OTG_DCFG_NZLSOHSK_Pos (2U) #define USB_OTG_DCFG_NZLSOHSK_Msk (0x1UL << USB_OTG_DCFG_NZLSOHSK_Pos) /*!< 0x00000004 */ #define USB_OTG_DCFG_NZLSOHSK USB_OTG_DCFG_NZLSOHSK_Msk /*!< Nonzero-length status OUT handshake */ -#define USB_OTG_DCFG_DAD_Pos (4U) +#define USB_OTG_DCFG_DAD_Pos (4U) #define USB_OTG_DCFG_DAD_Msk (0x7FUL << USB_OTG_DCFG_DAD_Pos) /*!< 0x000007F0 */ #define USB_OTG_DCFG_DAD USB_OTG_DCFG_DAD_Msk /*!< Device address */ #define USB_OTG_DCFG_DAD_0 (0x01UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000010 */ @@ -241,120 +241,120 @@ typedef struct #define USB_OTG_DCFG_DAD_5 (0x20UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000200 */ #define USB_OTG_DCFG_DAD_6 (0x40UL << USB_OTG_DCFG_DAD_Pos) /*!< 0x00000400 */ -#define USB_OTG_DCFG_PFIVL_Pos (11U) +#define USB_OTG_DCFG_PFIVL_Pos (11U) #define USB_OTG_DCFG_PFIVL_Msk (0x3UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001800 */ #define USB_OTG_DCFG_PFIVL USB_OTG_DCFG_PFIVL_Msk /*!< Periodic (micro)frame interval */ #define USB_OTG_DCFG_PFIVL_0 (0x1UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00000800 */ #define USB_OTG_DCFG_PFIVL_1 (0x2UL << USB_OTG_DCFG_PFIVL_Pos) /*!< 0x00001000 */ -#define USB_OTG_DCFG_PERSCHIVL_Pos (24U) +#define USB_OTG_DCFG_PERSCHIVL_Pos (24U) #define USB_OTG_DCFG_PERSCHIVL_Msk (0x3UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x03000000 */ #define USB_OTG_DCFG_PERSCHIVL USB_OTG_DCFG_PERSCHIVL_Msk /*!< Periodic scheduling interval */ #define USB_OTG_DCFG_PERSCHIVL_0 (0x1UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x01000000 */ #define USB_OTG_DCFG_PERSCHIVL_1 (0x2UL << USB_OTG_DCFG_PERSCHIVL_Pos) /*!< 0x02000000 */ /******************** Bit definition for USB_OTG_PCGCR register ********************/ -#define USB_OTG_PCGCR_STPPCLK_Pos (0U) +#define USB_OTG_PCGCR_STPPCLK_Pos (0U) #define USB_OTG_PCGCR_STPPCLK_Msk (0x1UL << USB_OTG_PCGCR_STPPCLK_Pos) /*!< 0x00000001 */ #define USB_OTG_PCGCR_STPPCLK USB_OTG_PCGCR_STPPCLK_Msk /*!< Stop PHY clock */ -#define USB_OTG_PCGCR_GATEHCLK_Pos (1U) +#define USB_OTG_PCGCR_GATEHCLK_Pos (1U) #define USB_OTG_PCGCR_GATEHCLK_Msk (0x1UL << USB_OTG_PCGCR_GATEHCLK_Pos) /*!< 0x00000002 */ #define USB_OTG_PCGCR_GATEHCLK USB_OTG_PCGCR_GATEHCLK_Msk /*!< Gate HCLK */ -#define USB_OTG_PCGCR_PHYSUSP_Pos (4U) +#define USB_OTG_PCGCR_PHYSUSP_Pos (4U) #define USB_OTG_PCGCR_PHYSUSP_Msk (0x1UL << USB_OTG_PCGCR_PHYSUSP_Pos) /*!< 0x00000010 */ #define USB_OTG_PCGCR_PHYSUSP USB_OTG_PCGCR_PHYSUSP_Msk /*!< PHY suspended */ /******************** Bit definition for USB_OTG_GOTGINT register ********************/ -#define USB_OTG_GOTGINT_SEDET_Pos (2U) +#define USB_OTG_GOTGINT_SEDET_Pos (2U) #define USB_OTG_GOTGINT_SEDET_Msk (0x1UL << USB_OTG_GOTGINT_SEDET_Pos) /*!< 0x00000004 */ #define USB_OTG_GOTGINT_SEDET USB_OTG_GOTGINT_SEDET_Msk /*!< Session end detected */ -#define USB_OTG_GOTGINT_SRSSCHG_Pos (8U) +#define USB_OTG_GOTGINT_SRSSCHG_Pos (8U) #define USB_OTG_GOTGINT_SRSSCHG_Msk (0x1UL << USB_OTG_GOTGINT_SRSSCHG_Pos) /*!< 0x00000100 */ #define USB_OTG_GOTGINT_SRSSCHG USB_OTG_GOTGINT_SRSSCHG_Msk /*!< Session request success status change */ -#define USB_OTG_GOTGINT_HNSSCHG_Pos (9U) +#define USB_OTG_GOTGINT_HNSSCHG_Pos (9U) #define USB_OTG_GOTGINT_HNSSCHG_Msk (0x1UL << USB_OTG_GOTGINT_HNSSCHG_Pos) /*!< 0x00000200 */ #define USB_OTG_GOTGINT_HNSSCHG USB_OTG_GOTGINT_HNSSCHG_Msk /*!< Host negotiation success status change */ -#define USB_OTG_GOTGINT_HNGDET_Pos (17U) +#define USB_OTG_GOTGINT_HNGDET_Pos (17U) #define USB_OTG_GOTGINT_HNGDET_Msk (0x1UL << USB_OTG_GOTGINT_HNGDET_Pos) /*!< 0x00020000 */ #define USB_OTG_GOTGINT_HNGDET USB_OTG_GOTGINT_HNGDET_Msk /*!< Host negotiation detected */ -#define USB_OTG_GOTGINT_ADTOCHG_Pos (18U) +#define USB_OTG_GOTGINT_ADTOCHG_Pos (18U) #define USB_OTG_GOTGINT_ADTOCHG_Msk (0x1UL << USB_OTG_GOTGINT_ADTOCHG_Pos) /*!< 0x00040000 */ #define USB_OTG_GOTGINT_ADTOCHG USB_OTG_GOTGINT_ADTOCHG_Msk /*!< A-device timeout change */ -#define USB_OTG_GOTGINT_DBCDNE_Pos (19U) +#define USB_OTG_GOTGINT_DBCDNE_Pos (19U) #define USB_OTG_GOTGINT_DBCDNE_Msk (0x1UL << USB_OTG_GOTGINT_DBCDNE_Pos) /*!< 0x00080000 */ #define USB_OTG_GOTGINT_DBCDNE USB_OTG_GOTGINT_DBCDNE_Msk /*!< Debounce done */ /******************** Bit definition for USB_OTG_DCTL register ********************/ -#define USB_OTG_DCTL_RWUSIG_Pos (0U) +#define USB_OTG_DCTL_RWUSIG_Pos (0U) #define USB_OTG_DCTL_RWUSIG_Msk (0x1UL << USB_OTG_DCTL_RWUSIG_Pos) /*!< 0x00000001 */ #define USB_OTG_DCTL_RWUSIG USB_OTG_DCTL_RWUSIG_Msk /*!< Remote wakeup signaling */ -#define USB_OTG_DCTL_SDIS_Pos (1U) +#define USB_OTG_DCTL_SDIS_Pos (1U) #define USB_OTG_DCTL_SDIS_Msk (0x1UL << USB_OTG_DCTL_SDIS_Pos) /*!< 0x00000002 */ #define USB_OTG_DCTL_SDIS USB_OTG_DCTL_SDIS_Msk /*!< Soft disconnect */ -#define USB_OTG_DCTL_GINSTS_Pos (2U) +#define USB_OTG_DCTL_GINSTS_Pos (2U) #define USB_OTG_DCTL_GINSTS_Msk (0x1UL << USB_OTG_DCTL_GINSTS_Pos) /*!< 0x00000004 */ #define USB_OTG_DCTL_GINSTS USB_OTG_DCTL_GINSTS_Msk /*!< Global IN NAK status */ -#define USB_OTG_DCTL_GONSTS_Pos (3U) +#define USB_OTG_DCTL_GONSTS_Pos (3U) #define USB_OTG_DCTL_GONSTS_Msk (0x1UL << USB_OTG_DCTL_GONSTS_Pos) /*!< 0x00000008 */ #define USB_OTG_DCTL_GONSTS USB_OTG_DCTL_GONSTS_Msk /*!< Global OUT NAK status */ -#define USB_OTG_DCTL_TCTL_Pos (4U) +#define USB_OTG_DCTL_TCTL_Pos (4U) #define USB_OTG_DCTL_TCTL_Msk (0x7UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000070 */ #define USB_OTG_DCTL_TCTL USB_OTG_DCTL_TCTL_Msk /*!< Test control */ #define USB_OTG_DCTL_TCTL_0 (0x1UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000010 */ #define USB_OTG_DCTL_TCTL_1 (0x2UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000020 */ #define USB_OTG_DCTL_TCTL_2 (0x4UL << USB_OTG_DCTL_TCTL_Pos) /*!< 0x00000040 */ -#define USB_OTG_DCTL_SGINAK_Pos (7U) +#define USB_OTG_DCTL_SGINAK_Pos (7U) #define USB_OTG_DCTL_SGINAK_Msk (0x1UL << USB_OTG_DCTL_SGINAK_Pos) /*!< 0x00000080 */ #define USB_OTG_DCTL_SGINAK USB_OTG_DCTL_SGINAK_Msk /*!< Set global IN NAK */ -#define USB_OTG_DCTL_CGINAK_Pos (8U) +#define USB_OTG_DCTL_CGINAK_Pos (8U) #define USB_OTG_DCTL_CGINAK_Msk (0x1UL << USB_OTG_DCTL_CGINAK_Pos) /*!< 0x00000100 */ #define USB_OTG_DCTL_CGINAK USB_OTG_DCTL_CGINAK_Msk /*!< Clear global IN NAK */ -#define USB_OTG_DCTL_SGONAK_Pos (9U) +#define USB_OTG_DCTL_SGONAK_Pos (9U) #define USB_OTG_DCTL_SGONAK_Msk (0x1UL << USB_OTG_DCTL_SGONAK_Pos) /*!< 0x00000200 */ #define USB_OTG_DCTL_SGONAK USB_OTG_DCTL_SGONAK_Msk /*!< Set global OUT NAK */ -#define USB_OTG_DCTL_CGONAK_Pos (10U) +#define USB_OTG_DCTL_CGONAK_Pos (10U) #define USB_OTG_DCTL_CGONAK_Msk (0x1UL << USB_OTG_DCTL_CGONAK_Pos) /*!< 0x00000400 */ #define USB_OTG_DCTL_CGONAK USB_OTG_DCTL_CGONAK_Msk /*!< Clear global OUT NAK */ -#define USB_OTG_DCTL_POPRGDNE_Pos (11U) +#define USB_OTG_DCTL_POPRGDNE_Pos (11U) #define USB_OTG_DCTL_POPRGDNE_Msk (0x1UL << USB_OTG_DCTL_POPRGDNE_Pos) /*!< 0x00000800 */ #define USB_OTG_DCTL_POPRGDNE USB_OTG_DCTL_POPRGDNE_Msk /*!< Power-on programming done */ /******************** Bit definition for USB_OTG_HFIR register ********************/ -#define USB_OTG_HFIR_FRIVL_Pos (0U) +#define USB_OTG_HFIR_FRIVL_Pos (0U) #define USB_OTG_HFIR_FRIVL_Msk (0xFFFFUL << USB_OTG_HFIR_FRIVL_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HFIR_FRIVL USB_OTG_HFIR_FRIVL_Msk /*!< Frame interval */ /******************** Bit definition for USB_OTG_HFNUM register ********************/ -#define USB_OTG_HFNUM_FRNUM_Pos (0U) +#define USB_OTG_HFNUM_FRNUM_Pos (0U) #define USB_OTG_HFNUM_FRNUM_Msk (0xFFFFUL << USB_OTG_HFNUM_FRNUM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HFNUM_FRNUM USB_OTG_HFNUM_FRNUM_Msk /*!< Frame number */ -#define USB_OTG_HFNUM_FTREM_Pos (16U) +#define USB_OTG_HFNUM_FTREM_Pos (16U) #define USB_OTG_HFNUM_FTREM_Msk (0xFFFFUL << USB_OTG_HFNUM_FTREM_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_HFNUM_FTREM USB_OTG_HFNUM_FTREM_Msk /*!< Frame time remaining */ /******************** Bit definition for USB_OTG_DSTS register ********************/ -#define USB_OTG_DSTS_SUSPSTS_Pos (0U) +#define USB_OTG_DSTS_SUSPSTS_Pos (0U) #define USB_OTG_DSTS_SUSPSTS_Msk (0x1UL << USB_OTG_DSTS_SUSPSTS_Pos) /*!< 0x00000001 */ #define USB_OTG_DSTS_SUSPSTS USB_OTG_DSTS_SUSPSTS_Msk /*!< Suspend status */ -#define USB_OTG_DSTS_ENUMSPD_Pos (1U) +#define USB_OTG_DSTS_ENUMSPD_Pos (1U) #define USB_OTG_DSTS_ENUMSPD_Msk (0x3UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000006 */ #define USB_OTG_DSTS_ENUMSPD USB_OTG_DSTS_ENUMSPD_Msk /*!< Enumerated speed */ #define USB_OTG_DSTS_ENUMSPD_0 (0x1UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000002 */ #define USB_OTG_DSTS_ENUMSPD_1 (0x2UL << USB_OTG_DSTS_ENUMSPD_Pos) /*!< 0x00000004 */ -#define USB_OTG_DSTS_EERR_Pos (3U) +#define USB_OTG_DSTS_EERR_Pos (3U) #define USB_OTG_DSTS_EERR_Msk (0x1UL << USB_OTG_DSTS_EERR_Pos) /*!< 0x00000008 */ #define USB_OTG_DSTS_EERR USB_OTG_DSTS_EERR_Msk /*!< Erratic error */ -#define USB_OTG_DSTS_FNSOF_Pos (8U) +#define USB_OTG_DSTS_FNSOF_Pos (8U) #define USB_OTG_DSTS_FNSOF_Msk (0x3FFFUL << USB_OTG_DSTS_FNSOF_Pos) /*!< 0x003FFF00 */ #define USB_OTG_DSTS_FNSOF USB_OTG_DSTS_FNSOF_Msk /*!< Frame number of the received SOF */ /******************** Bit definition for USB_OTG_GAHBCFG register ********************/ -#define USB_OTG_GAHBCFG_GINT_Pos (0U) +#define USB_OTG_GAHBCFG_GINT_Pos (0U) #define USB_OTG_GAHBCFG_GINT_Msk (0x1UL << USB_OTG_GAHBCFG_GINT_Pos) /*!< 0x00000001 */ #define USB_OTG_GAHBCFG_GINT USB_OTG_GAHBCFG_GINT_Msk /*!< Global interrupt mask */ -#define USB_OTG_GAHBCFG_HBSTLEN_Pos (1U) +#define USB_OTG_GAHBCFG_HBSTLEN_Pos (1U) #define USB_OTG_GAHBCFG_HBSTLEN_Msk (0xFUL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< 0x0000001E */ #define USB_OTG_GAHBCFG_HBSTLEN USB_OTG_GAHBCFG_HBSTLEN_Msk /*!< Burst length/type */ #define USB_OTG_GAHBCFG_HBSTLEN_0 (0x0UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< Single */ @@ -362,99 +362,99 @@ typedef struct #define USB_OTG_GAHBCFG_HBSTLEN_2 (0x3UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR4 */ #define USB_OTG_GAHBCFG_HBSTLEN_3 (0x5UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR8 */ #define USB_OTG_GAHBCFG_HBSTLEN_4 (0x7UL << USB_OTG_GAHBCFG_HBSTLEN_Pos) /*!< INCR16 */ -#define USB_OTG_GAHBCFG_DMAEN_Pos (5U) +#define USB_OTG_GAHBCFG_DMAEN_Pos (5U) #define USB_OTG_GAHBCFG_DMAEN_Msk (0x1UL << USB_OTG_GAHBCFG_DMAEN_Pos) /*!< 0x00000020 */ #define USB_OTG_GAHBCFG_DMAEN USB_OTG_GAHBCFG_DMAEN_Msk /*!< DMA enable */ -#define USB_OTG_GAHBCFG_TXFELVL_Pos (7U) +#define USB_OTG_GAHBCFG_TXFELVL_Pos (7U) #define USB_OTG_GAHBCFG_TXFELVL_Msk (0x1UL << USB_OTG_GAHBCFG_TXFELVL_Pos) /*!< 0x00000080 */ #define USB_OTG_GAHBCFG_TXFELVL USB_OTG_GAHBCFG_TXFELVL_Msk /*!< TxFIFO empty level */ -#define USB_OTG_GAHBCFG_PTXFELVL_Pos (8U) +#define USB_OTG_GAHBCFG_PTXFELVL_Pos (8U) #define USB_OTG_GAHBCFG_PTXFELVL_Msk (0x1UL << USB_OTG_GAHBCFG_PTXFELVL_Pos) /*!< 0x00000100 */ #define USB_OTG_GAHBCFG_PTXFELVL USB_OTG_GAHBCFG_PTXFELVL_Msk /*!< Periodic TxFIFO empty level */ /******************** Bit definition for USB_OTG_GUSBCFG register ********************/ -#define USB_OTG_GUSBCFG_TOCAL_Pos (0U) +#define USB_OTG_GUSBCFG_TOCAL_Pos (0U) #define USB_OTG_GUSBCFG_TOCAL_Msk (0x7UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000007 */ #define USB_OTG_GUSBCFG_TOCAL USB_OTG_GUSBCFG_TOCAL_Msk /*!< FS timeout calibration */ #define USB_OTG_GUSBCFG_TOCAL_0 (0x1UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000001 */ #define USB_OTG_GUSBCFG_TOCAL_1 (0x2UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000002 */ #define USB_OTG_GUSBCFG_TOCAL_2 (0x4UL << USB_OTG_GUSBCFG_TOCAL_Pos) /*!< 0x00000004 */ -#define USB_OTG_GUSBCFG_PHYSEL_Pos (6U) +#define USB_OTG_GUSBCFG_PHYSEL_Pos (6U) #define USB_OTG_GUSBCFG_PHYSEL_Msk (0x1UL << USB_OTG_GUSBCFG_PHYSEL_Pos) /*!< 0x00000040 */ #define USB_OTG_GUSBCFG_PHYSEL USB_OTG_GUSBCFG_PHYSEL_Msk /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */ -#define USB_OTG_GUSBCFG_SRPCAP_Pos (8U) +#define USB_OTG_GUSBCFG_SRPCAP_Pos (8U) #define USB_OTG_GUSBCFG_SRPCAP_Msk (0x1UL << USB_OTG_GUSBCFG_SRPCAP_Pos) /*!< 0x00000100 */ #define USB_OTG_GUSBCFG_SRPCAP USB_OTG_GUSBCFG_SRPCAP_Msk /*!< SRP-capable */ -#define USB_OTG_GUSBCFG_HNPCAP_Pos (9U) +#define USB_OTG_GUSBCFG_HNPCAP_Pos (9U) #define USB_OTG_GUSBCFG_HNPCAP_Msk (0x1UL << USB_OTG_GUSBCFG_HNPCAP_Pos) /*!< 0x00000200 */ #define USB_OTG_GUSBCFG_HNPCAP USB_OTG_GUSBCFG_HNPCAP_Msk /*!< HNP-capable */ -#define USB_OTG_GUSBCFG_TRDT_Pos (10U) +#define USB_OTG_GUSBCFG_TRDT_Pos (10U) #define USB_OTG_GUSBCFG_TRDT_Msk (0xFUL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00003C00 */ #define USB_OTG_GUSBCFG_TRDT USB_OTG_GUSBCFG_TRDT_Msk /*!< USB turnaround time */ #define USB_OTG_GUSBCFG_TRDT_0 (0x1UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000400 */ #define USB_OTG_GUSBCFG_TRDT_1 (0x2UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00000800 */ #define USB_OTG_GUSBCFG_TRDT_2 (0x4UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00001000 */ #define USB_OTG_GUSBCFG_TRDT_3 (0x8UL << USB_OTG_GUSBCFG_TRDT_Pos) /*!< 0x00002000 */ -#define USB_OTG_GUSBCFG_PHYLPCS_Pos (15U) +#define USB_OTG_GUSBCFG_PHYLPCS_Pos (15U) #define USB_OTG_GUSBCFG_PHYLPCS_Msk (0x1UL << USB_OTG_GUSBCFG_PHYLPCS_Pos) /*!< 0x00008000 */ #define USB_OTG_GUSBCFG_PHYLPCS USB_OTG_GUSBCFG_PHYLPCS_Msk /*!< PHY Low-power clock select */ -#define USB_OTG_GUSBCFG_ULPIFSLS_Pos (17U) +#define USB_OTG_GUSBCFG_ULPIFSLS_Pos (17U) #define USB_OTG_GUSBCFG_ULPIFSLS_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIFSLS_Pos) /*!< 0x00020000 */ #define USB_OTG_GUSBCFG_ULPIFSLS USB_OTG_GUSBCFG_ULPIFSLS_Msk /*!< ULPI FS/LS select */ -#define USB_OTG_GUSBCFG_ULPIAR_Pos (18U) +#define USB_OTG_GUSBCFG_ULPIAR_Pos (18U) #define USB_OTG_GUSBCFG_ULPIAR_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIAR_Pos) /*!< 0x00040000 */ #define USB_OTG_GUSBCFG_ULPIAR USB_OTG_GUSBCFG_ULPIAR_Msk /*!< ULPI Auto-resume */ -#define USB_OTG_GUSBCFG_ULPICSM_Pos (19U) +#define USB_OTG_GUSBCFG_ULPICSM_Pos (19U) #define USB_OTG_GUSBCFG_ULPICSM_Msk (0x1UL << USB_OTG_GUSBCFG_ULPICSM_Pos) /*!< 0x00080000 */ #define USB_OTG_GUSBCFG_ULPICSM USB_OTG_GUSBCFG_ULPICSM_Msk /*!< ULPI Clock SuspendM */ -#define USB_OTG_GUSBCFG_ULPIEVBUSD_Pos (20U) +#define USB_OTG_GUSBCFG_ULPIEVBUSD_Pos (20U) #define USB_OTG_GUSBCFG_ULPIEVBUSD_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSD_Pos) /*!< 0x00100000 */ #define USB_OTG_GUSBCFG_ULPIEVBUSD USB_OTG_GUSBCFG_ULPIEVBUSD_Msk /*!< ULPI External VBUS Drive */ -#define USB_OTG_GUSBCFG_ULPIEVBUSI_Pos (21U) +#define USB_OTG_GUSBCFG_ULPIEVBUSI_Pos (21U) #define USB_OTG_GUSBCFG_ULPIEVBUSI_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIEVBUSI_Pos) /*!< 0x00200000 */ #define USB_OTG_GUSBCFG_ULPIEVBUSI USB_OTG_GUSBCFG_ULPIEVBUSI_Msk /*!< ULPI external VBUS indicator */ -#define USB_OTG_GUSBCFG_TSDPS_Pos (22U) +#define USB_OTG_GUSBCFG_TSDPS_Pos (22U) #define USB_OTG_GUSBCFG_TSDPS_Msk (0x1UL << USB_OTG_GUSBCFG_TSDPS_Pos) /*!< 0x00400000 */ #define USB_OTG_GUSBCFG_TSDPS USB_OTG_GUSBCFG_TSDPS_Msk /*!< TermSel DLine pulsing selection */ -#define USB_OTG_GUSBCFG_PCCI_Pos (23U) +#define USB_OTG_GUSBCFG_PCCI_Pos (23U) #define USB_OTG_GUSBCFG_PCCI_Msk (0x1UL << USB_OTG_GUSBCFG_PCCI_Pos) /*!< 0x00800000 */ #define USB_OTG_GUSBCFG_PCCI USB_OTG_GUSBCFG_PCCI_Msk /*!< Indicator complement */ -#define USB_OTG_GUSBCFG_PTCI_Pos (24U) +#define USB_OTG_GUSBCFG_PTCI_Pos (24U) #define USB_OTG_GUSBCFG_PTCI_Msk (0x1UL << USB_OTG_GUSBCFG_PTCI_Pos) /*!< 0x01000000 */ #define USB_OTG_GUSBCFG_PTCI USB_OTG_GUSBCFG_PTCI_Msk /*!< Indicator pass through */ -#define USB_OTG_GUSBCFG_ULPIIPD_Pos (25U) +#define USB_OTG_GUSBCFG_ULPIIPD_Pos (25U) #define USB_OTG_GUSBCFG_ULPIIPD_Msk (0x1UL << USB_OTG_GUSBCFG_ULPIIPD_Pos) /*!< 0x02000000 */ #define USB_OTG_GUSBCFG_ULPIIPD USB_OTG_GUSBCFG_ULPIIPD_Msk /*!< ULPI interface protect disable */ -#define USB_OTG_GUSBCFG_FHMOD_Pos (29U) +#define USB_OTG_GUSBCFG_FHMOD_Pos (29U) #define USB_OTG_GUSBCFG_FHMOD_Msk (0x1UL << USB_OTG_GUSBCFG_FHMOD_Pos) /*!< 0x20000000 */ #define USB_OTG_GUSBCFG_FHMOD USB_OTG_GUSBCFG_FHMOD_Msk /*!< Forced host mode */ -#define USB_OTG_GUSBCFG_FDMOD_Pos (30U) +#define USB_OTG_GUSBCFG_FDMOD_Pos (30U) #define USB_OTG_GUSBCFG_FDMOD_Msk (0x1UL << USB_OTG_GUSBCFG_FDMOD_Pos) /*!< 0x40000000 */ #define USB_OTG_GUSBCFG_FDMOD USB_OTG_GUSBCFG_FDMOD_Msk /*!< Forced peripheral mode */ -#define USB_OTG_GUSBCFG_CTXPKT_Pos (31U) +#define USB_OTG_GUSBCFG_CTXPKT_Pos (31U) #define USB_OTG_GUSBCFG_CTXPKT_Msk (0x1UL << USB_OTG_GUSBCFG_CTXPKT_Pos) /*!< 0x80000000 */ #define USB_OTG_GUSBCFG_CTXPKT USB_OTG_GUSBCFG_CTXPKT_Msk /*!< Corrupt Tx packet */ /******************** Bit definition for USB_OTG_GRSTCTL register ********************/ -#define USB_OTG_GRSTCTL_CSRST_Pos (0U) +#define USB_OTG_GRSTCTL_CSRST_Pos (0U) #define USB_OTG_GRSTCTL_CSRST_Msk (0x1UL << USB_OTG_GRSTCTL_CSRST_Pos) /*!< 0x00000001 */ #define USB_OTG_GRSTCTL_CSRST USB_OTG_GRSTCTL_CSRST_Msk /*!< Core soft reset */ -#define USB_OTG_GRSTCTL_HSRST_Pos (1U) +#define USB_OTG_GRSTCTL_HSRST_Pos (1U) #define USB_OTG_GRSTCTL_HSRST_Msk (0x1UL << USB_OTG_GRSTCTL_HSRST_Pos) /*!< 0x00000002 */ #define USB_OTG_GRSTCTL_HSRST USB_OTG_GRSTCTL_HSRST_Msk /*!< HCLK soft reset */ -#define USB_OTG_GRSTCTL_FCRST_Pos (2U) +#define USB_OTG_GRSTCTL_FCRST_Pos (2U) #define USB_OTG_GRSTCTL_FCRST_Msk (0x1UL << USB_OTG_GRSTCTL_FCRST_Pos) /*!< 0x00000004 */ #define USB_OTG_GRSTCTL_FCRST USB_OTG_GRSTCTL_FCRST_Msk /*!< Host frame counter reset */ -#define USB_OTG_GRSTCTL_RXFFLSH_Pos (4U) +#define USB_OTG_GRSTCTL_RXFFLSH_Pos (4U) #define USB_OTG_GRSTCTL_RXFFLSH_Msk (0x1UL << USB_OTG_GRSTCTL_RXFFLSH_Pos) /*!< 0x00000010 */ #define USB_OTG_GRSTCTL_RXFFLSH USB_OTG_GRSTCTL_RXFFLSH_Msk /*!< RxFIFO flush */ -#define USB_OTG_GRSTCTL_TXFFLSH_Pos (5U) +#define USB_OTG_GRSTCTL_TXFFLSH_Pos (5U) #define USB_OTG_GRSTCTL_TXFFLSH_Msk (0x1UL << USB_OTG_GRSTCTL_TXFFLSH_Pos) /*!< 0x00000020 */ #define USB_OTG_GRSTCTL_TXFFLSH USB_OTG_GRSTCTL_TXFFLSH_Msk /*!< TxFIFO flush */ -#define USB_OTG_GRSTCTL_TXFNUM_Pos (6U) +#define USB_OTG_GRSTCTL_TXFNUM_Pos (6U) #define USB_OTG_GRSTCTL_TXFNUM_Msk (0x1FUL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x000007C0 */ #define USB_OTG_GRSTCTL_TXFNUM USB_OTG_GRSTCTL_TXFNUM_Msk /*!< TxFIFO number */ #define USB_OTG_GRSTCTL_TXFNUM_0 (0x01UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000040 */ @@ -462,44 +462,44 @@ typedef struct #define USB_OTG_GRSTCTL_TXFNUM_2 (0x04UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000100 */ #define USB_OTG_GRSTCTL_TXFNUM_3 (0x08UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000200 */ #define USB_OTG_GRSTCTL_TXFNUM_4 (0x10UL << USB_OTG_GRSTCTL_TXFNUM_Pos) /*!< 0x00000400 */ -#define USB_OTG_GRSTCTL_DMAREQ_Pos (30U) +#define USB_OTG_GRSTCTL_DMAREQ_Pos (30U) #define USB_OTG_GRSTCTL_DMAREQ_Msk (0x1UL << USB_OTG_GRSTCTL_DMAREQ_Pos) /*!< 0x40000000 */ #define USB_OTG_GRSTCTL_DMAREQ USB_OTG_GRSTCTL_DMAREQ_Msk /*!< DMA request signal */ -#define USB_OTG_GRSTCTL_AHBIDL_Pos (31U) +#define USB_OTG_GRSTCTL_AHBIDL_Pos (31U) #define USB_OTG_GRSTCTL_AHBIDL_Msk (0x1UL << USB_OTG_GRSTCTL_AHBIDL_Pos) /*!< 0x80000000 */ #define USB_OTG_GRSTCTL_AHBIDL USB_OTG_GRSTCTL_AHBIDL_Msk /*!< AHB master idle */ /******************** Bit definition for USB_OTG_DIEPMSK register ********************/ -#define USB_OTG_DIEPMSK_XFRCM_Pos (0U) +#define USB_OTG_DIEPMSK_XFRCM_Pos (0U) #define USB_OTG_DIEPMSK_XFRCM_Msk (0x1UL << USB_OTG_DIEPMSK_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DIEPMSK_XFRCM USB_OTG_DIEPMSK_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DIEPMSK_EPDM_Pos (1U) +#define USB_OTG_DIEPMSK_EPDM_Pos (1U) #define USB_OTG_DIEPMSK_EPDM_Msk (0x1UL << USB_OTG_DIEPMSK_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DIEPMSK_EPDM USB_OTG_DIEPMSK_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DIEPMSK_TOM_Pos (3U) +#define USB_OTG_DIEPMSK_TOM_Pos (3U) #define USB_OTG_DIEPMSK_TOM_Msk (0x1UL << USB_OTG_DIEPMSK_TOM_Pos) /*!< 0x00000008 */ #define USB_OTG_DIEPMSK_TOM USB_OTG_DIEPMSK_TOM_Msk /*!< Timeout condition mask (nonisochronous endpoints) */ -#define USB_OTG_DIEPMSK_ITTXFEMSK_Pos (4U) +#define USB_OTG_DIEPMSK_ITTXFEMSK_Pos (4U) #define USB_OTG_DIEPMSK_ITTXFEMSK_Msk (0x1UL << USB_OTG_DIEPMSK_ITTXFEMSK_Pos) /*!< 0x00000010 */ #define USB_OTG_DIEPMSK_ITTXFEMSK USB_OTG_DIEPMSK_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DIEPMSK_INEPNMM_Pos (5U) +#define USB_OTG_DIEPMSK_INEPNMM_Pos (5U) #define USB_OTG_DIEPMSK_INEPNMM_Msk (0x1UL << USB_OTG_DIEPMSK_INEPNMM_Pos) /*!< 0x00000020 */ #define USB_OTG_DIEPMSK_INEPNMM USB_OTG_DIEPMSK_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DIEPMSK_INEPNEM_Pos (6U) +#define USB_OTG_DIEPMSK_INEPNEM_Pos (6U) #define USB_OTG_DIEPMSK_INEPNEM_Msk (0x1UL << USB_OTG_DIEPMSK_INEPNEM_Pos) /*!< 0x00000040 */ #define USB_OTG_DIEPMSK_INEPNEM USB_OTG_DIEPMSK_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DIEPMSK_TXFURM_Pos (8U) +#define USB_OTG_DIEPMSK_TXFURM_Pos (8U) #define USB_OTG_DIEPMSK_TXFURM_Msk (0x1UL << USB_OTG_DIEPMSK_TXFURM_Pos) /*!< 0x00000100 */ #define USB_OTG_DIEPMSK_TXFURM USB_OTG_DIEPMSK_TXFURM_Msk /*!< FIFO underrun mask */ -#define USB_OTG_DIEPMSK_BIM_Pos (9U) +#define USB_OTG_DIEPMSK_BIM_Pos (9U) #define USB_OTG_DIEPMSK_BIM_Msk (0x1UL << USB_OTG_DIEPMSK_BIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DIEPMSK_BIM USB_OTG_DIEPMSK_BIM_Msk /*!< BNA interrupt mask */ /******************** Bit definition for USB_OTG_HPTXSTS register ********************/ -#define USB_OTG_HPTXSTS_PTXFSAVL_Pos (0U) +#define USB_OTG_HPTXSTS_PTXFSAVL_Pos (0U) #define USB_OTG_HPTXSTS_PTXFSAVL_Msk (0xFFFFUL << USB_OTG_HPTXSTS_PTXFSAVL_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HPTXSTS_PTXFSAVL USB_OTG_HPTXSTS_PTXFSAVL_Msk /*!< Periodic transmit data FIFO space available */ -#define USB_OTG_HPTXSTS_PTXQSAV_Pos (16U) +#define USB_OTG_HPTXSTS_PTXQSAV_Pos (16U) #define USB_OTG_HPTXSTS_PTXQSAV_Msk (0xFFUL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00FF0000 */ #define USB_OTG_HPTXSTS_PTXQSAV USB_OTG_HPTXSTS_PTXQSAV_Msk /*!< Periodic transmit request queue space available */ #define USB_OTG_HPTXSTS_PTXQSAV_0 (0x01UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00010000 */ @@ -511,7 +511,7 @@ typedef struct #define USB_OTG_HPTXSTS_PTXQSAV_6 (0x40UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00400000 */ #define USB_OTG_HPTXSTS_PTXQSAV_7 (0x80UL << USB_OTG_HPTXSTS_PTXQSAV_Pos) /*!< 0x00800000 */ -#define USB_OTG_HPTXSTS_PTXQTOP_Pos (24U) +#define USB_OTG_HPTXSTS_PTXQTOP_Pos (24U) #define USB_OTG_HPTXSTS_PTXQTOP_Msk (0xFFUL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0xFF000000 */ #define USB_OTG_HPTXSTS_PTXQTOP USB_OTG_HPTXSTS_PTXQTOP_Msk /*!< Top of the periodic transmit request queue */ #define USB_OTG_HPTXSTS_PTXQTOP_0 (0x01UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x01000000 */ @@ -524,36 +524,36 @@ typedef struct #define USB_OTG_HPTXSTS_PTXQTOP_7 (0x80UL << USB_OTG_HPTXSTS_PTXQTOP_Pos) /*!< 0x80000000 */ /******************** Bit definition for USB_OTG_HAINT register ********************/ -#define USB_OTG_HAINT_HAINT_Pos (0U) +#define USB_OTG_HAINT_HAINT_Pos (0U) #define USB_OTG_HAINT_HAINT_Msk (0xFFFFUL << USB_OTG_HAINT_HAINT_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HAINT_HAINT USB_OTG_HAINT_HAINT_Msk /*!< Channel interrupts */ /******************** Bit definition for USB_OTG_DOEPMSK register ********************/ -#define USB_OTG_DOEPMSK_XFRCM_Pos (0U) +#define USB_OTG_DOEPMSK_XFRCM_Pos (0U) #define USB_OTG_DOEPMSK_XFRCM_Msk (0x1UL << USB_OTG_DOEPMSK_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DOEPMSK_XFRCM USB_OTG_DOEPMSK_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DOEPMSK_EPDM_Pos (1U) +#define USB_OTG_DOEPMSK_EPDM_Pos (1U) #define USB_OTG_DOEPMSK_EPDM_Msk (0x1UL << USB_OTG_DOEPMSK_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DOEPMSK_EPDM USB_OTG_DOEPMSK_EPDM_Msk /*!< Endpoint disabled interrupt mask */ #define USB_OTG_DOEPMSK_AHBERRM_Pos (2U) #define USB_OTG_DOEPMSK_AHBERRM_Msk (0x1UL << USB_OTG_DOEPMSK_AHBERRM_Pos) /*!< 0x00000004 */ #define USB_OTG_DOEPMSK_AHBERRM USB_OTG_DOEPMSK_AHBERRM_Msk /*!< OUT transaction AHB Error interrupt mask */ -#define USB_OTG_DOEPMSK_STUPM_Pos (3U) +#define USB_OTG_DOEPMSK_STUPM_Pos (3U) #define USB_OTG_DOEPMSK_STUPM_Msk (0x1UL << USB_OTG_DOEPMSK_STUPM_Pos) /*!< 0x00000008 */ #define USB_OTG_DOEPMSK_STUPM USB_OTG_DOEPMSK_STUPM_Msk /*!< SETUP phase done mask */ -#define USB_OTG_DOEPMSK_OTEPDM_Pos (4U) +#define USB_OTG_DOEPMSK_OTEPDM_Pos (4U) #define USB_OTG_DOEPMSK_OTEPDM_Msk (0x1UL << USB_OTG_DOEPMSK_OTEPDM_Pos) /*!< 0x00000010 */ #define USB_OTG_DOEPMSK_OTEPDM USB_OTG_DOEPMSK_OTEPDM_Msk /*!< OUT token received when endpoint disabled mask */ -#define USB_OTG_DOEPMSK_OTEPSPRM_Pos (5U) +#define USB_OTG_DOEPMSK_OTEPSPRM_Pos (5U) #define USB_OTG_DOEPMSK_OTEPSPRM_Msk (0x1UL << USB_OTG_DOEPMSK_OTEPSPRM_Pos) /*!< 0x00000020 */ #define USB_OTG_DOEPMSK_OTEPSPRM USB_OTG_DOEPMSK_OTEPSPRM_Msk /*!< Status Phase Received mask */ -#define USB_OTG_DOEPMSK_B2BSTUP_Pos (6U) +#define USB_OTG_DOEPMSK_B2BSTUP_Pos (6U) #define USB_OTG_DOEPMSK_B2BSTUP_Msk (0x1UL << USB_OTG_DOEPMSK_B2BSTUP_Pos) /*!< 0x00000040 */ #define USB_OTG_DOEPMSK_B2BSTUP USB_OTG_DOEPMSK_B2BSTUP_Msk /*!< Back-to-back SETUP packets received mask */ -#define USB_OTG_DOEPMSK_OPEM_Pos (8U) +#define USB_OTG_DOEPMSK_OPEM_Pos (8U) #define USB_OTG_DOEPMSK_OPEM_Msk (0x1UL << USB_OTG_DOEPMSK_OPEM_Pos) /*!< 0x00000100 */ #define USB_OTG_DOEPMSK_OPEM USB_OTG_DOEPMSK_OPEM_Msk /*!< OUT packet error mask */ -#define USB_OTG_DOEPMSK_BOIM_Pos (9U) +#define USB_OTG_DOEPMSK_BOIM_Pos (9U) #define USB_OTG_DOEPMSK_BOIM_Msk (0x1UL << USB_OTG_DOEPMSK_BOIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DOEPMSK_BOIM USB_OTG_DOEPMSK_BOIM_Msk /*!< BNA interrupt mask */ #define USB_OTG_DOEPMSK_BERRM_Pos (12U) @@ -566,235 +566,235 @@ typedef struct #define USB_OTG_DOEPMSK_NYETM_Msk (0x1UL << USB_OTG_DOEPMSK_NYETM_Pos) /*!< 0x00004000 */ #define USB_OTG_DOEPMSK_NYETM USB_OTG_DOEPMSK_NYETM_Msk /*!< NYET interrupt mask */ /******************** Bit definition for USB_OTG_GINTSTS register ********************/ -#define USB_OTG_GINTSTS_CMOD_Pos (0U) +#define USB_OTG_GINTSTS_CMOD_Pos (0U) #define USB_OTG_GINTSTS_CMOD_Msk (0x1UL << USB_OTG_GINTSTS_CMOD_Pos) /*!< 0x00000001 */ #define USB_OTG_GINTSTS_CMOD USB_OTG_GINTSTS_CMOD_Msk /*!< Current mode of operation */ -#define USB_OTG_GINTSTS_MMIS_Pos (1U) +#define USB_OTG_GINTSTS_MMIS_Pos (1U) #define USB_OTG_GINTSTS_MMIS_Msk (0x1UL << USB_OTG_GINTSTS_MMIS_Pos) /*!< 0x00000002 */ #define USB_OTG_GINTSTS_MMIS USB_OTG_GINTSTS_MMIS_Msk /*!< Mode mismatch interrupt */ -#define USB_OTG_GINTSTS_OTGINT_Pos (2U) +#define USB_OTG_GINTSTS_OTGINT_Pos (2U) #define USB_OTG_GINTSTS_OTGINT_Msk (0x1UL << USB_OTG_GINTSTS_OTGINT_Pos) /*!< 0x00000004 */ #define USB_OTG_GINTSTS_OTGINT USB_OTG_GINTSTS_OTGINT_Msk /*!< OTG interrupt */ -#define USB_OTG_GINTSTS_SOF_Pos (3U) +#define USB_OTG_GINTSTS_SOF_Pos (3U) #define USB_OTG_GINTSTS_SOF_Msk (0x1UL << USB_OTG_GINTSTS_SOF_Pos) /*!< 0x00000008 */ #define USB_OTG_GINTSTS_SOF USB_OTG_GINTSTS_SOF_Msk /*!< Start of frame */ -#define USB_OTG_GINTSTS_RXFLVL_Pos (4U) +#define USB_OTG_GINTSTS_RXFLVL_Pos (4U) #define USB_OTG_GINTSTS_RXFLVL_Msk (0x1UL << USB_OTG_GINTSTS_RXFLVL_Pos) /*!< 0x00000010 */ #define USB_OTG_GINTSTS_RXFLVL USB_OTG_GINTSTS_RXFLVL_Msk /*!< RxFIFO nonempty */ -#define USB_OTG_GINTSTS_NPTXFE_Pos (5U) +#define USB_OTG_GINTSTS_NPTXFE_Pos (5U) #define USB_OTG_GINTSTS_NPTXFE_Msk (0x1UL << USB_OTG_GINTSTS_NPTXFE_Pos) /*!< 0x00000020 */ #define USB_OTG_GINTSTS_NPTXFE USB_OTG_GINTSTS_NPTXFE_Msk /*!< Nonperiodic TxFIFO empty */ -#define USB_OTG_GINTSTS_GINAKEFF_Pos (6U) +#define USB_OTG_GINTSTS_GINAKEFF_Pos (6U) #define USB_OTG_GINTSTS_GINAKEFF_Msk (0x1UL << USB_OTG_GINTSTS_GINAKEFF_Pos) /*!< 0x00000040 */ #define USB_OTG_GINTSTS_GINAKEFF USB_OTG_GINTSTS_GINAKEFF_Msk /*!< Global IN nonperiodic NAK effective */ -#define USB_OTG_GINTSTS_BOUTNAKEFF_Pos (7U) +#define USB_OTG_GINTSTS_BOUTNAKEFF_Pos (7U) #define USB_OTG_GINTSTS_BOUTNAKEFF_Msk (0x1UL << USB_OTG_GINTSTS_BOUTNAKEFF_Pos) /*!< 0x00000080 */ #define USB_OTG_GINTSTS_BOUTNAKEFF USB_OTG_GINTSTS_BOUTNAKEFF_Msk /*!< Global OUT NAK effective */ -#define USB_OTG_GINTSTS_ESUSP_Pos (10U) +#define USB_OTG_GINTSTS_ESUSP_Pos (10U) #define USB_OTG_GINTSTS_ESUSP_Msk (0x1UL << USB_OTG_GINTSTS_ESUSP_Pos) /*!< 0x00000400 */ #define USB_OTG_GINTSTS_ESUSP USB_OTG_GINTSTS_ESUSP_Msk /*!< Early suspend */ -#define USB_OTG_GINTSTS_USBSUSP_Pos (11U) +#define USB_OTG_GINTSTS_USBSUSP_Pos (11U) #define USB_OTG_GINTSTS_USBSUSP_Msk (0x1UL << USB_OTG_GINTSTS_USBSUSP_Pos) /*!< 0x00000800 */ #define USB_OTG_GINTSTS_USBSUSP USB_OTG_GINTSTS_USBSUSP_Msk /*!< USB suspend */ -#define USB_OTG_GINTSTS_USBRST_Pos (12U) +#define USB_OTG_GINTSTS_USBRST_Pos (12U) #define USB_OTG_GINTSTS_USBRST_Msk (0x1UL << USB_OTG_GINTSTS_USBRST_Pos) /*!< 0x00001000 */ #define USB_OTG_GINTSTS_USBRST USB_OTG_GINTSTS_USBRST_Msk /*!< USB reset */ -#define USB_OTG_GINTSTS_ENUMDNE_Pos (13U) +#define USB_OTG_GINTSTS_ENUMDNE_Pos (13U) #define USB_OTG_GINTSTS_ENUMDNE_Msk (0x1UL << USB_OTG_GINTSTS_ENUMDNE_Pos) /*!< 0x00002000 */ #define USB_OTG_GINTSTS_ENUMDNE USB_OTG_GINTSTS_ENUMDNE_Msk /*!< Enumeration done */ -#define USB_OTG_GINTSTS_ISOODRP_Pos (14U) +#define USB_OTG_GINTSTS_ISOODRP_Pos (14U) #define USB_OTG_GINTSTS_ISOODRP_Msk (0x1UL << USB_OTG_GINTSTS_ISOODRP_Pos) /*!< 0x00004000 */ #define USB_OTG_GINTSTS_ISOODRP USB_OTG_GINTSTS_ISOODRP_Msk /*!< Isochronous OUT packet dropped interrupt */ -#define USB_OTG_GINTSTS_EOPF_Pos (15U) +#define USB_OTG_GINTSTS_EOPF_Pos (15U) #define USB_OTG_GINTSTS_EOPF_Msk (0x1UL << USB_OTG_GINTSTS_EOPF_Pos) /*!< 0x00008000 */ #define USB_OTG_GINTSTS_EOPF USB_OTG_GINTSTS_EOPF_Msk /*!< End of periodic frame interrupt */ -#define USB_OTG_GINTSTS_IEPINT_Pos (18U) +#define USB_OTG_GINTSTS_IEPINT_Pos (18U) #define USB_OTG_GINTSTS_IEPINT_Msk (0x1UL << USB_OTG_GINTSTS_IEPINT_Pos) /*!< 0x00040000 */ #define USB_OTG_GINTSTS_IEPINT USB_OTG_GINTSTS_IEPINT_Msk /*!< IN endpoint interrupt */ -#define USB_OTG_GINTSTS_OEPINT_Pos (19U) +#define USB_OTG_GINTSTS_OEPINT_Pos (19U) #define USB_OTG_GINTSTS_OEPINT_Msk (0x1UL << USB_OTG_GINTSTS_OEPINT_Pos) /*!< 0x00080000 */ #define USB_OTG_GINTSTS_OEPINT USB_OTG_GINTSTS_OEPINT_Msk /*!< OUT endpoint interrupt */ -#define USB_OTG_GINTSTS_IISOIXFR_Pos (20U) +#define USB_OTG_GINTSTS_IISOIXFR_Pos (20U) #define USB_OTG_GINTSTS_IISOIXFR_Msk (0x1UL << USB_OTG_GINTSTS_IISOIXFR_Pos) /*!< 0x00100000 */ #define USB_OTG_GINTSTS_IISOIXFR USB_OTG_GINTSTS_IISOIXFR_Msk /*!< Incomplete isochronous IN transfer */ -#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos (21U) +#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos (21U) #define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk (0x1UL << USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Pos) /*!< 0x00200000 */ #define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT USB_OTG_GINTSTS_PXFR_INCOMPISOOUT_Msk /*!< Incomplete periodic transfer */ -#define USB_OTG_GINTSTS_DATAFSUSP_Pos (22U) +#define USB_OTG_GINTSTS_DATAFSUSP_Pos (22U) #define USB_OTG_GINTSTS_DATAFSUSP_Msk (0x1UL << USB_OTG_GINTSTS_DATAFSUSP_Pos) /*!< 0x00400000 */ #define USB_OTG_GINTSTS_DATAFSUSP USB_OTG_GINTSTS_DATAFSUSP_Msk /*!< Data fetch suspended */ -#define USB_OTG_GINTSTS_HPRTINT_Pos (24U) +#define USB_OTG_GINTSTS_HPRTINT_Pos (24U) #define USB_OTG_GINTSTS_HPRTINT_Msk (0x1UL << USB_OTG_GINTSTS_HPRTINT_Pos) /*!< 0x01000000 */ #define USB_OTG_GINTSTS_HPRTINT USB_OTG_GINTSTS_HPRTINT_Msk /*!< Host port interrupt */ -#define USB_OTG_GINTSTS_HCINT_Pos (25U) +#define USB_OTG_GINTSTS_HCINT_Pos (25U) #define USB_OTG_GINTSTS_HCINT_Msk (0x1UL << USB_OTG_GINTSTS_HCINT_Pos) /*!< 0x02000000 */ #define USB_OTG_GINTSTS_HCINT USB_OTG_GINTSTS_HCINT_Msk /*!< Host channels interrupt */ -#define USB_OTG_GINTSTS_PTXFE_Pos (26U) +#define USB_OTG_GINTSTS_PTXFE_Pos (26U) #define USB_OTG_GINTSTS_PTXFE_Msk (0x1UL << USB_OTG_GINTSTS_PTXFE_Pos) /*!< 0x04000000 */ #define USB_OTG_GINTSTS_PTXFE USB_OTG_GINTSTS_PTXFE_Msk /*!< Periodic TxFIFO empty */ -#define USB_OTG_GINTSTS_CIDSCHG_Pos (28U) +#define USB_OTG_GINTSTS_CIDSCHG_Pos (28U) #define USB_OTG_GINTSTS_CIDSCHG_Msk (0x1UL << USB_OTG_GINTSTS_CIDSCHG_Pos) /*!< 0x10000000 */ #define USB_OTG_GINTSTS_CIDSCHG USB_OTG_GINTSTS_CIDSCHG_Msk /*!< Connector ID status change */ -#define USB_OTG_GINTSTS_DISCINT_Pos (29U) +#define USB_OTG_GINTSTS_DISCINT_Pos (29U) #define USB_OTG_GINTSTS_DISCINT_Msk (0x1UL << USB_OTG_GINTSTS_DISCINT_Pos) /*!< 0x20000000 */ #define USB_OTG_GINTSTS_DISCINT USB_OTG_GINTSTS_DISCINT_Msk /*!< Disconnect detected interrupt */ -#define USB_OTG_GINTSTS_SRQINT_Pos (30U) +#define USB_OTG_GINTSTS_SRQINT_Pos (30U) #define USB_OTG_GINTSTS_SRQINT_Msk (0x1UL << USB_OTG_GINTSTS_SRQINT_Pos) /*!< 0x40000000 */ #define USB_OTG_GINTSTS_SRQINT USB_OTG_GINTSTS_SRQINT_Msk /*!< Session request/new session detected interrupt */ -#define USB_OTG_GINTSTS_WKUINT_Pos (31U) +#define USB_OTG_GINTSTS_WKUINT_Pos (31U) #define USB_OTG_GINTSTS_WKUINT_Msk (0x1UL << USB_OTG_GINTSTS_WKUINT_Pos) /*!< 0x80000000 */ #define USB_OTG_GINTSTS_WKUINT USB_OTG_GINTSTS_WKUINT_Msk /*!< Resume/remote wakeup detected interrupt */ /******************** Bit definition for USB_OTG_GINTMSK register ********************/ -#define USB_OTG_GINTMSK_MMISM_Pos (1U) +#define USB_OTG_GINTMSK_MMISM_Pos (1U) #define USB_OTG_GINTMSK_MMISM_Msk (0x1UL << USB_OTG_GINTMSK_MMISM_Pos) /*!< 0x00000002 */ #define USB_OTG_GINTMSK_MMISM USB_OTG_GINTMSK_MMISM_Msk /*!< Mode mismatch interrupt mask */ -#define USB_OTG_GINTMSK_OTGINT_Pos (2U) +#define USB_OTG_GINTMSK_OTGINT_Pos (2U) #define USB_OTG_GINTMSK_OTGINT_Msk (0x1UL << USB_OTG_GINTMSK_OTGINT_Pos) /*!< 0x00000004 */ #define USB_OTG_GINTMSK_OTGINT USB_OTG_GINTMSK_OTGINT_Msk /*!< OTG interrupt mask */ -#define USB_OTG_GINTMSK_SOFM_Pos (3U) +#define USB_OTG_GINTMSK_SOFM_Pos (3U) #define USB_OTG_GINTMSK_SOFM_Msk (0x1UL << USB_OTG_GINTMSK_SOFM_Pos) /*!< 0x00000008 */ #define USB_OTG_GINTMSK_SOFM USB_OTG_GINTMSK_SOFM_Msk /*!< Start of frame mask */ -#define USB_OTG_GINTMSK_RXFLVLM_Pos (4U) +#define USB_OTG_GINTMSK_RXFLVLM_Pos (4U) #define USB_OTG_GINTMSK_RXFLVLM_Msk (0x1UL << USB_OTG_GINTMSK_RXFLVLM_Pos) /*!< 0x00000010 */ #define USB_OTG_GINTMSK_RXFLVLM USB_OTG_GINTMSK_RXFLVLM_Msk /*!< Receive FIFO nonempty mask */ -#define USB_OTG_GINTMSK_NPTXFEM_Pos (5U) +#define USB_OTG_GINTMSK_NPTXFEM_Pos (5U) #define USB_OTG_GINTMSK_NPTXFEM_Msk (0x1UL << USB_OTG_GINTMSK_NPTXFEM_Pos) /*!< 0x00000020 */ #define USB_OTG_GINTMSK_NPTXFEM USB_OTG_GINTMSK_NPTXFEM_Msk /*!< Nonperiodic TxFIFO empty mask */ -#define USB_OTG_GINTMSK_GINAKEFFM_Pos (6U) +#define USB_OTG_GINTMSK_GINAKEFFM_Pos (6U) #define USB_OTG_GINTMSK_GINAKEFFM_Msk (0x1UL << USB_OTG_GINTMSK_GINAKEFFM_Pos) /*!< 0x00000040 */ #define USB_OTG_GINTMSK_GINAKEFFM USB_OTG_GINTMSK_GINAKEFFM_Msk /*!< Global nonperiodic IN NAK effective mask */ -#define USB_OTG_GINTMSK_GONAKEFFM_Pos (7U) +#define USB_OTG_GINTMSK_GONAKEFFM_Pos (7U) #define USB_OTG_GINTMSK_GONAKEFFM_Msk (0x1UL << USB_OTG_GINTMSK_GONAKEFFM_Pos) /*!< 0x00000080 */ #define USB_OTG_GINTMSK_GONAKEFFM USB_OTG_GINTMSK_GONAKEFFM_Msk /*!< Global OUT NAK effective mask */ -#define USB_OTG_GINTMSK_ESUSPM_Pos (10U) +#define USB_OTG_GINTMSK_ESUSPM_Pos (10U) #define USB_OTG_GINTMSK_ESUSPM_Msk (0x1UL << USB_OTG_GINTMSK_ESUSPM_Pos) /*!< 0x00000400 */ #define USB_OTG_GINTMSK_ESUSPM USB_OTG_GINTMSK_ESUSPM_Msk /*!< Early suspend mask */ -#define USB_OTG_GINTMSK_USBSUSPM_Pos (11U) +#define USB_OTG_GINTMSK_USBSUSPM_Pos (11U) #define USB_OTG_GINTMSK_USBSUSPM_Msk (0x1UL << USB_OTG_GINTMSK_USBSUSPM_Pos) /*!< 0x00000800 */ #define USB_OTG_GINTMSK_USBSUSPM USB_OTG_GINTMSK_USBSUSPM_Msk /*!< USB suspend mask */ -#define USB_OTG_GINTMSK_USBRST_Pos (12U) +#define USB_OTG_GINTMSK_USBRST_Pos (12U) #define USB_OTG_GINTMSK_USBRST_Msk (0x1UL << USB_OTG_GINTMSK_USBRST_Pos) /*!< 0x00001000 */ #define USB_OTG_GINTMSK_USBRST USB_OTG_GINTMSK_USBRST_Msk /*!< USB reset mask */ -#define USB_OTG_GINTMSK_ENUMDNEM_Pos (13U) +#define USB_OTG_GINTMSK_ENUMDNEM_Pos (13U) #define USB_OTG_GINTMSK_ENUMDNEM_Msk (0x1UL << USB_OTG_GINTMSK_ENUMDNEM_Pos) /*!< 0x00002000 */ #define USB_OTG_GINTMSK_ENUMDNEM USB_OTG_GINTMSK_ENUMDNEM_Msk /*!< Enumeration done mask */ -#define USB_OTG_GINTMSK_ISOODRPM_Pos (14U) +#define USB_OTG_GINTMSK_ISOODRPM_Pos (14U) #define USB_OTG_GINTMSK_ISOODRPM_Msk (0x1UL << USB_OTG_GINTMSK_ISOODRPM_Pos) /*!< 0x00004000 */ #define USB_OTG_GINTMSK_ISOODRPM USB_OTG_GINTMSK_ISOODRPM_Msk /*!< Isochronous OUT packet dropped interrupt mask */ -#define USB_OTG_GINTMSK_EOPFM_Pos (15U) +#define USB_OTG_GINTMSK_EOPFM_Pos (15U) #define USB_OTG_GINTMSK_EOPFM_Msk (0x1UL << USB_OTG_GINTMSK_EOPFM_Pos) /*!< 0x00008000 */ #define USB_OTG_GINTMSK_EOPFM USB_OTG_GINTMSK_EOPFM_Msk /*!< End of periodic frame interrupt mask */ -#define USB_OTG_GINTMSK_EPMISM_Pos (17U) +#define USB_OTG_GINTMSK_EPMISM_Pos (17U) #define USB_OTG_GINTMSK_EPMISM_Msk (0x1UL << USB_OTG_GINTMSK_EPMISM_Pos) /*!< 0x00020000 */ #define USB_OTG_GINTMSK_EPMISM USB_OTG_GINTMSK_EPMISM_Msk /*!< Endpoint mismatch interrupt mask */ -#define USB_OTG_GINTMSK_IEPINT_Pos (18U) +#define USB_OTG_GINTMSK_IEPINT_Pos (18U) #define USB_OTG_GINTMSK_IEPINT_Msk (0x1UL << USB_OTG_GINTMSK_IEPINT_Pos) /*!< 0x00040000 */ #define USB_OTG_GINTMSK_IEPINT USB_OTG_GINTMSK_IEPINT_Msk /*!< IN endpoints interrupt mask */ -#define USB_OTG_GINTMSK_OEPINT_Pos (19U) +#define USB_OTG_GINTMSK_OEPINT_Pos (19U) #define USB_OTG_GINTMSK_OEPINT_Msk (0x1UL << USB_OTG_GINTMSK_OEPINT_Pos) /*!< 0x00080000 */ #define USB_OTG_GINTMSK_OEPINT USB_OTG_GINTMSK_OEPINT_Msk /*!< OUT endpoints interrupt mask */ -#define USB_OTG_GINTMSK_IISOIXFRM_Pos (20U) +#define USB_OTG_GINTMSK_IISOIXFRM_Pos (20U) #define USB_OTG_GINTMSK_IISOIXFRM_Msk (0x1UL << USB_OTG_GINTMSK_IISOIXFRM_Pos) /*!< 0x00100000 */ #define USB_OTG_GINTMSK_IISOIXFRM USB_OTG_GINTMSK_IISOIXFRM_Msk /*!< Incomplete isochronous IN transfer mask */ -#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos (21U) +#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos (21U) #define USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk (0x1UL << USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Pos) /*!< 0x00200000 */ #define USB_OTG_GINTMSK_PXFRM_IISOOXFRM USB_OTG_GINTMSK_PXFRM_IISOOXFRM_Msk /*!< Incomplete periodic transfer mask */ -#define USB_OTG_GINTMSK_FSUSPM_Pos (22U) +#define USB_OTG_GINTMSK_FSUSPM_Pos (22U) #define USB_OTG_GINTMSK_FSUSPM_Msk (0x1UL << USB_OTG_GINTMSK_FSUSPM_Pos) /*!< 0x00400000 */ #define USB_OTG_GINTMSK_FSUSPM USB_OTG_GINTMSK_FSUSPM_Msk /*!< Data fetch suspended mask */ -#define USB_OTG_GINTMSK_PRTIM_Pos (24U) +#define USB_OTG_GINTMSK_PRTIM_Pos (24U) #define USB_OTG_GINTMSK_PRTIM_Msk (0x1UL << USB_OTG_GINTMSK_PRTIM_Pos) /*!< 0x01000000 */ #define USB_OTG_GINTMSK_PRTIM USB_OTG_GINTMSK_PRTIM_Msk /*!< Host port interrupt mask */ -#define USB_OTG_GINTMSK_HCIM_Pos (25U) +#define USB_OTG_GINTMSK_HCIM_Pos (25U) #define USB_OTG_GINTMSK_HCIM_Msk (0x1UL << USB_OTG_GINTMSK_HCIM_Pos) /*!< 0x02000000 */ #define USB_OTG_GINTMSK_HCIM USB_OTG_GINTMSK_HCIM_Msk /*!< Host channels interrupt mask */ -#define USB_OTG_GINTMSK_PTXFEM_Pos (26U) +#define USB_OTG_GINTMSK_PTXFEM_Pos (26U) #define USB_OTG_GINTMSK_PTXFEM_Msk (0x1UL << USB_OTG_GINTMSK_PTXFEM_Pos) /*!< 0x04000000 */ #define USB_OTG_GINTMSK_PTXFEM USB_OTG_GINTMSK_PTXFEM_Msk /*!< Periodic TxFIFO empty mask */ -#define USB_OTG_GINTMSK_CIDSCHGM_Pos (28U) +#define USB_OTG_GINTMSK_CIDSCHGM_Pos (28U) #define USB_OTG_GINTMSK_CIDSCHGM_Msk (0x1UL << USB_OTG_GINTMSK_CIDSCHGM_Pos) /*!< 0x10000000 */ #define USB_OTG_GINTMSK_CIDSCHGM USB_OTG_GINTMSK_CIDSCHGM_Msk /*!< Connector ID status change mask */ -#define USB_OTG_GINTMSK_DISCINT_Pos (29U) +#define USB_OTG_GINTMSK_DISCINT_Pos (29U) #define USB_OTG_GINTMSK_DISCINT_Msk (0x1UL << USB_OTG_GINTMSK_DISCINT_Pos) /*!< 0x20000000 */ #define USB_OTG_GINTMSK_DISCINT USB_OTG_GINTMSK_DISCINT_Msk /*!< Disconnect detected interrupt mask */ -#define USB_OTG_GINTMSK_SRQIM_Pos (30U) +#define USB_OTG_GINTMSK_SRQIM_Pos (30U) #define USB_OTG_GINTMSK_SRQIM_Msk (0x1UL << USB_OTG_GINTMSK_SRQIM_Pos) /*!< 0x40000000 */ #define USB_OTG_GINTMSK_SRQIM USB_OTG_GINTMSK_SRQIM_Msk /*!< Session request/new session detected interrupt mask */ -#define USB_OTG_GINTMSK_WUIM_Pos (31U) +#define USB_OTG_GINTMSK_WUIM_Pos (31U) #define USB_OTG_GINTMSK_WUIM_Msk (0x1UL << USB_OTG_GINTMSK_WUIM_Pos) /*!< 0x80000000 */ #define USB_OTG_GINTMSK_WUIM USB_OTG_GINTMSK_WUIM_Msk /*!< Resume/remote wakeup detected interrupt mask */ /******************** Bit definition for USB_OTG_DAINT register ********************/ -#define USB_OTG_DAINT_IEPINT_Pos (0U) +#define USB_OTG_DAINT_IEPINT_Pos (0U) #define USB_OTG_DAINT_IEPINT_Msk (0xFFFFUL << USB_OTG_DAINT_IEPINT_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DAINT_IEPINT USB_OTG_DAINT_IEPINT_Msk /*!< IN endpoint interrupt bits */ -#define USB_OTG_DAINT_OEPINT_Pos (16U) +#define USB_OTG_DAINT_OEPINT_Pos (16U) #define USB_OTG_DAINT_OEPINT_Msk (0xFFFFUL << USB_OTG_DAINT_OEPINT_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_DAINT_OEPINT USB_OTG_DAINT_OEPINT_Msk /*!< OUT endpoint interrupt bits */ /******************** Bit definition for USB_OTG_HAINTMSK register ********************/ -#define USB_OTG_HAINTMSK_HAINTM_Pos (0U) +#define USB_OTG_HAINTMSK_HAINTM_Pos (0U) #define USB_OTG_HAINTMSK_HAINTM_Msk (0xFFFFUL << USB_OTG_HAINTMSK_HAINTM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HAINTMSK_HAINTM USB_OTG_HAINTMSK_HAINTM_Msk /*!< Channel interrupt mask */ /******************** Bit definition for USB_OTG_GRXSTSP register ********************/ -#define USB_OTG_GRXSTSP_EPNUM_Pos (0U) +#define USB_OTG_GRXSTSP_EPNUM_Pos (0U) #define USB_OTG_GRXSTSP_EPNUM_Msk (0xFUL << USB_OTG_GRXSTSP_EPNUM_Pos) /*!< 0x0000000F */ #define USB_OTG_GRXSTSP_EPNUM USB_OTG_GRXSTSP_EPNUM_Msk /*!< IN EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_BCNT_Pos (4U) +#define USB_OTG_GRXSTSP_BCNT_Pos (4U) #define USB_OTG_GRXSTSP_BCNT_Msk (0x7FFUL << USB_OTG_GRXSTSP_BCNT_Pos) /*!< 0x00007FF0 */ #define USB_OTG_GRXSTSP_BCNT USB_OTG_GRXSTSP_BCNT_Msk /*!< OUT EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_DPID_Pos (15U) +#define USB_OTG_GRXSTSP_DPID_Pos (15U) #define USB_OTG_GRXSTSP_DPID_Msk (0x3UL << USB_OTG_GRXSTSP_DPID_Pos) /*!< 0x00018000 */ #define USB_OTG_GRXSTSP_DPID USB_OTG_GRXSTSP_DPID_Msk /*!< OUT EP interrupt mask bits */ -#define USB_OTG_GRXSTSP_PKTSTS_Pos (17U) +#define USB_OTG_GRXSTSP_PKTSTS_Pos (17U) #define USB_OTG_GRXSTSP_PKTSTS_Msk (0xFUL << USB_OTG_GRXSTSP_PKTSTS_Pos) /*!< 0x001E0000 */ #define USB_OTG_GRXSTSP_PKTSTS USB_OTG_GRXSTSP_PKTSTS_Msk /*!< OUT EP interrupt mask bits */ /******************** Bit definition for USB_OTG_DAINTMSK register ********************/ -#define USB_OTG_DAINTMSK_IEPM_Pos (0U) +#define USB_OTG_DAINTMSK_IEPM_Pos (0U) #define USB_OTG_DAINTMSK_IEPM_Msk (0xFFFFUL << USB_OTG_DAINTMSK_IEPM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DAINTMSK_IEPM USB_OTG_DAINTMSK_IEPM_Msk /*!< IN EP interrupt mask bits */ -#define USB_OTG_DAINTMSK_OEPM_Pos (16U) +#define USB_OTG_DAINTMSK_OEPM_Pos (16U) #define USB_OTG_DAINTMSK_OEPM_Msk (0xFFFFUL << USB_OTG_DAINTMSK_OEPM_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_DAINTMSK_OEPM USB_OTG_DAINTMSK_OEPM_Msk /*!< OUT EP interrupt mask bits */ /******************** Bit definition for USB_OTG_GRXFSIZ register ********************/ -#define USB_OTG_GRXFSIZ_RXFD_Pos (0U) +#define USB_OTG_GRXFSIZ_RXFD_Pos (0U) #define USB_OTG_GRXFSIZ_RXFD_Msk (0xFFFFUL << USB_OTG_GRXFSIZ_RXFD_Pos) /*!< 0x0000FFFF */ #define USB_OTG_GRXFSIZ_RXFD USB_OTG_GRXFSIZ_RXFD_Msk /*!< RxFIFO depth */ /******************** Bit definition for USB_OTG_DVBUSDIS register ********************/ -#define USB_OTG_DVBUSDIS_VBUSDT_Pos (0U) +#define USB_OTG_DVBUSDIS_VBUSDT_Pos (0U) #define USB_OTG_DVBUSDIS_VBUSDT_Msk (0xFFFFUL << USB_OTG_DVBUSDIS_VBUSDT_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DVBUSDIS_VBUSDT USB_OTG_DVBUSDIS_VBUSDT_Msk /*!< Device VBUS discharge time */ /******************** Bit definition for OTG register ********************/ -#define USB_OTG_NPTXFSA_Pos (0U) +#define USB_OTG_NPTXFSA_Pos (0U) #define USB_OTG_NPTXFSA_Msk (0xFFFFUL << USB_OTG_NPTXFSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_NPTXFSA USB_OTG_NPTXFSA_Msk /*!< Nonperiodic transmit RAM start address */ -#define USB_OTG_NPTXFD_Pos (16U) +#define USB_OTG_NPTXFD_Pos (16U) #define USB_OTG_NPTXFD_Msk (0xFFFFUL << USB_OTG_NPTXFD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_NPTXFD USB_OTG_NPTXFD_Msk /*!< Nonperiodic TxFIFO depth */ -#define USB_OTG_TX0FSA_Pos (0U) +#define USB_OTG_TX0FSA_Pos (0U) #define USB_OTG_TX0FSA_Msk (0xFFFFUL << USB_OTG_TX0FSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_TX0FSA USB_OTG_TX0FSA_Msk /*!< Endpoint 0 transmit RAM start address */ -#define USB_OTG_TX0FD_Pos (16U) +#define USB_OTG_TX0FD_Pos (16U) #define USB_OTG_TX0FD_Msk (0xFFFFUL << USB_OTG_TX0FD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_TX0FD USB_OTG_TX0FD_Msk /*!< Endpoint 0 TxFIFO depth */ /******************** Bit definition for USB_OTG_DVBUSPULSE register ********************/ -#define USB_OTG_DVBUSPULSE_DVBUSP_Pos (0U) +#define USB_OTG_DVBUSPULSE_DVBUSP_Pos (0U) #define USB_OTG_DVBUSPULSE_DVBUSP_Msk (0xFFFUL << USB_OTG_DVBUSPULSE_DVBUSP_Pos) /*!< 0x00000FFF */ #define USB_OTG_DVBUSPULSE_DVBUSP USB_OTG_DVBUSPULSE_DVBUSP_Msk /*!< Device VBUS pulsing time */ /******************** Bit definition for USB_OTG_GNPTXSTS register ********************/ -#define USB_OTG_GNPTXSTS_NPTXFSAV_Pos (0U) +#define USB_OTG_GNPTXSTS_NPTXFSAV_Pos (0U) #define USB_OTG_GNPTXSTS_NPTXFSAV_Msk (0xFFFFUL << USB_OTG_GNPTXSTS_NPTXFSAV_Pos) /*!< 0x0000FFFF */ #define USB_OTG_GNPTXSTS_NPTXFSAV USB_OTG_GNPTXSTS_NPTXFSAV_Msk /*!< Nonperiodic TxFIFO space available */ -#define USB_OTG_GNPTXSTS_NPTQXSAV_Pos (16U) +#define USB_OTG_GNPTXSTS_NPTQXSAV_Pos (16U) #define USB_OTG_GNPTXSTS_NPTQXSAV_Msk (0xFFUL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00FF0000 */ #define USB_OTG_GNPTXSTS_NPTQXSAV USB_OTG_GNPTXSTS_NPTQXSAV_Msk /*!< Nonperiodic transmit request queue space available */ #define USB_OTG_GNPTXSTS_NPTQXSAV_0 (0x01UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00010000 */ @@ -806,7 +806,7 @@ typedef struct #define USB_OTG_GNPTXSTS_NPTQXSAV_6 (0x40UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00400000 */ #define USB_OTG_GNPTXSTS_NPTQXSAV_7 (0x80UL << USB_OTG_GNPTXSTS_NPTQXSAV_Pos) /*!< 0x00800000 */ -#define USB_OTG_GNPTXSTS_NPTXQTOP_Pos (24U) +#define USB_OTG_GNPTXSTS_NPTXQTOP_Pos (24U) #define USB_OTG_GNPTXSTS_NPTXQTOP_Msk (0x7FUL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x7F000000 */ #define USB_OTG_GNPTXSTS_NPTXQTOP USB_OTG_GNPTXSTS_NPTXQTOP_Msk /*!< Top of the nonperiodic transmit request queue */ #define USB_OTG_GNPTXSTS_NPTXQTOP_0 (0x01UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x01000000 */ @@ -818,14 +818,14 @@ typedef struct #define USB_OTG_GNPTXSTS_NPTXQTOP_6 (0x40UL << USB_OTG_GNPTXSTS_NPTXQTOP_Pos) /*!< 0x40000000 */ /******************** Bit definition for USB_OTG_DTHRCTL register ********************/ -#define USB_OTG_DTHRCTL_NONISOTHREN_Pos (0U) +#define USB_OTG_DTHRCTL_NONISOTHREN_Pos (0U) #define USB_OTG_DTHRCTL_NONISOTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_NONISOTHREN_Pos) /*!< 0x00000001 */ #define USB_OTG_DTHRCTL_NONISOTHREN USB_OTG_DTHRCTL_NONISOTHREN_Msk /*!< Nonisochronous IN endpoints threshold enable */ -#define USB_OTG_DTHRCTL_ISOTHREN_Pos (1U) +#define USB_OTG_DTHRCTL_ISOTHREN_Pos (1U) #define USB_OTG_DTHRCTL_ISOTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_ISOTHREN_Pos) /*!< 0x00000002 */ #define USB_OTG_DTHRCTL_ISOTHREN USB_OTG_DTHRCTL_ISOTHREN_Msk /*!< ISO IN endpoint threshold enable */ -#define USB_OTG_DTHRCTL_TXTHRLEN_Pos (2U) +#define USB_OTG_DTHRCTL_TXTHRLEN_Pos (2U) #define USB_OTG_DTHRCTL_TXTHRLEN_Msk (0x1FFUL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x000007FC */ #define USB_OTG_DTHRCTL_TXTHRLEN USB_OTG_DTHRCTL_TXTHRLEN_Msk /*!< Transmit threshold length */ #define USB_OTG_DTHRCTL_TXTHRLEN_0 (0x001UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000004 */ @@ -837,11 +837,11 @@ typedef struct #define USB_OTG_DTHRCTL_TXTHRLEN_6 (0x040UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000100 */ #define USB_OTG_DTHRCTL_TXTHRLEN_7 (0x080UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000200 */ #define USB_OTG_DTHRCTL_TXTHRLEN_8 (0x100UL << USB_OTG_DTHRCTL_TXTHRLEN_Pos) /*!< 0x00000400 */ -#define USB_OTG_DTHRCTL_RXTHREN_Pos (16U) +#define USB_OTG_DTHRCTL_RXTHREN_Pos (16U) #define USB_OTG_DTHRCTL_RXTHREN_Msk (0x1UL << USB_OTG_DTHRCTL_RXTHREN_Pos) /*!< 0x00010000 */ #define USB_OTG_DTHRCTL_RXTHREN USB_OTG_DTHRCTL_RXTHREN_Msk /*!< Receive threshold enable */ -#define USB_OTG_DTHRCTL_RXTHRLEN_Pos (17U) +#define USB_OTG_DTHRCTL_RXTHRLEN_Pos (17U) #define USB_OTG_DTHRCTL_RXTHRLEN_Msk (0x1FFUL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x03FE0000 */ #define USB_OTG_DTHRCTL_RXTHRLEN USB_OTG_DTHRCTL_RXTHRLEN_Msk /*!< Receive threshold length */ #define USB_OTG_DTHRCTL_RXTHRLEN_0 (0x001UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00020000 */ @@ -853,118 +853,118 @@ typedef struct #define USB_OTG_DTHRCTL_RXTHRLEN_6 (0x040UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x00800000 */ #define USB_OTG_DTHRCTL_RXTHRLEN_7 (0x080UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x01000000 */ #define USB_OTG_DTHRCTL_RXTHRLEN_8 (0x100UL << USB_OTG_DTHRCTL_RXTHRLEN_Pos) /*!< 0x02000000 */ -#define USB_OTG_DTHRCTL_ARPEN_Pos (27U) +#define USB_OTG_DTHRCTL_ARPEN_Pos (27U) #define USB_OTG_DTHRCTL_ARPEN_Msk (0x1UL << USB_OTG_DTHRCTL_ARPEN_Pos) /*!< 0x08000000 */ #define USB_OTG_DTHRCTL_ARPEN USB_OTG_DTHRCTL_ARPEN_Msk /*!< Arbiter parking enable */ /******************** Bit definition for USB_OTG_DIEPEMPMSK register ********************/ -#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos (0U) +#define USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos (0U) #define USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk (0xFFFFUL << USB_OTG_DIEPEMPMSK_INEPTXFEM_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DIEPEMPMSK_INEPTXFEM USB_OTG_DIEPEMPMSK_INEPTXFEM_Msk /*!< IN EP Tx FIFO empty interrupt mask bits */ /******************** Bit definition for USB_OTG_DEACHINT register ********************/ -#define USB_OTG_DEACHINT_IEP1INT_Pos (1U) +#define USB_OTG_DEACHINT_IEP1INT_Pos (1U) #define USB_OTG_DEACHINT_IEP1INT_Msk (0x1UL << USB_OTG_DEACHINT_IEP1INT_Pos) /*!< 0x00000002 */ #define USB_OTG_DEACHINT_IEP1INT USB_OTG_DEACHINT_IEP1INT_Msk /*!< IN endpoint 1interrupt bit */ -#define USB_OTG_DEACHINT_OEP1INT_Pos (17U) +#define USB_OTG_DEACHINT_OEP1INT_Pos (17U) #define USB_OTG_DEACHINT_OEP1INT_Msk (0x1UL << USB_OTG_DEACHINT_OEP1INT_Pos) /*!< 0x00020000 */ #define USB_OTG_DEACHINT_OEP1INT USB_OTG_DEACHINT_OEP1INT_Msk /*!< OUT endpoint 1 interrupt bit */ /******************** Bit definition for USB_OTG_GCCFG register ********************/ -#define USB_OTG_GCCFG_PWRDWN_Pos (16U) +#define USB_OTG_GCCFG_PWRDWN_Pos (16U) #define USB_OTG_GCCFG_PWRDWN_Msk (0x1UL << USB_OTG_GCCFG_PWRDWN_Pos) /*!< 0x00010000 */ #define USB_OTG_GCCFG_PWRDWN USB_OTG_GCCFG_PWRDWN_Msk /*!< Power down */ -#define USB_OTG_GCCFG_VBUSASEN_Pos (18U) +#define USB_OTG_GCCFG_VBUSASEN_Pos (18U) #define USB_OTG_GCCFG_VBUSASEN_Msk (0x1UL << USB_OTG_GCCFG_VBUSASEN_Pos) /*!< 0x00040000 */ #define USB_OTG_GCCFG_VBUSASEN USB_OTG_GCCFG_VBUSASEN_Msk /*!< Enable the VBUS sensing device */ -#define USB_OTG_GCCFG_VBUSBSEN_Pos (19U) +#define USB_OTG_GCCFG_VBUSBSEN_Pos (19U) #define USB_OTG_GCCFG_VBUSBSEN_Msk (0x1UL << USB_OTG_GCCFG_VBUSBSEN_Pos) /*!< 0x00080000 */ #define USB_OTG_GCCFG_VBUSBSEN USB_OTG_GCCFG_VBUSBSEN_Msk /*!< Enable the VBUS sensing device */ -#define USB_OTG_GCCFG_SOFOUTEN_Pos (20U) +#define USB_OTG_GCCFG_SOFOUTEN_Pos (20U) #define USB_OTG_GCCFG_SOFOUTEN_Msk (0x1UL << USB_OTG_GCCFG_SOFOUTEN_Pos) /*!< 0x00100000 */ #define USB_OTG_GCCFG_SOFOUTEN USB_OTG_GCCFG_SOFOUTEN_Msk /*!< SOF output enable */ /******************** Bit definition for USB_OTG_DEACHINTMSK register ********************/ -#define USB_OTG_DEACHINTMSK_IEP1INTM_Pos (1U) +#define USB_OTG_DEACHINTMSK_IEP1INTM_Pos (1U) #define USB_OTG_DEACHINTMSK_IEP1INTM_Msk (0x1UL << USB_OTG_DEACHINTMSK_IEP1INTM_Pos) /*!< 0x00000002 */ #define USB_OTG_DEACHINTMSK_IEP1INTM USB_OTG_DEACHINTMSK_IEP1INTM_Msk /*!< IN Endpoint 1 interrupt mask bit */ -#define USB_OTG_DEACHINTMSK_OEP1INTM_Pos (17U) +#define USB_OTG_DEACHINTMSK_OEP1INTM_Pos (17U) #define USB_OTG_DEACHINTMSK_OEP1INTM_Msk (0x1UL << USB_OTG_DEACHINTMSK_OEP1INTM_Pos) /*!< 0x00020000 */ #define USB_OTG_DEACHINTMSK_OEP1INTM USB_OTG_DEACHINTMSK_OEP1INTM_Msk /*!< OUT Endpoint 1 interrupt mask bit */ /******************** Bit definition for USB_OTG_CID register ********************/ -#define USB_OTG_CID_PRODUCT_ID_Pos (0U) +#define USB_OTG_CID_PRODUCT_ID_Pos (0U) #define USB_OTG_CID_PRODUCT_ID_Msk (0xFFFFFFFFUL << USB_OTG_CID_PRODUCT_ID_Pos) /*!< 0xFFFFFFFF */ #define USB_OTG_CID_PRODUCT_ID USB_OTG_CID_PRODUCT_ID_Msk /*!< Product ID field */ /******************** Bit definition for USB_OTG_DIEPEACHMSK1 register ********************/ -#define USB_OTG_DIEPEACHMSK1_XFRCM_Pos (0U) +#define USB_OTG_DIEPEACHMSK1_XFRCM_Pos (0U) #define USB_OTG_DIEPEACHMSK1_XFRCM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DIEPEACHMSK1_XFRCM USB_OTG_DIEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_EPDM_Pos (1U) +#define USB_OTG_DIEPEACHMSK1_EPDM_Pos (1U) #define USB_OTG_DIEPEACHMSK1_EPDM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DIEPEACHMSK1_EPDM USB_OTG_DIEPEACHMSK1_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_TOM_Pos (3U) +#define USB_OTG_DIEPEACHMSK1_TOM_Pos (3U) #define USB_OTG_DIEPEACHMSK1_TOM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */ #define USB_OTG_DIEPEACHMSK1_TOM USB_OTG_DIEPEACHMSK1_TOM_Msk /*!< Timeout condition mask (nonisochronous endpoints) */ -#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos (4U) +#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos (4U) #define USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */ #define USB_OTG_DIEPEACHMSK1_ITTXFEMSK USB_OTG_DIEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DIEPEACHMSK1_INEPNMM_Pos (5U) +#define USB_OTG_DIEPEACHMSK1_INEPNMM_Pos (5U) #define USB_OTG_DIEPEACHMSK1_INEPNMM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */ #define USB_OTG_DIEPEACHMSK1_INEPNMM USB_OTG_DIEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DIEPEACHMSK1_INEPNEM_Pos (6U) +#define USB_OTG_DIEPEACHMSK1_INEPNEM_Pos (6U) #define USB_OTG_DIEPEACHMSK1_INEPNEM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */ #define USB_OTG_DIEPEACHMSK1_INEPNEM USB_OTG_DIEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DIEPEACHMSK1_TXFURM_Pos (8U) +#define USB_OTG_DIEPEACHMSK1_TXFURM_Pos (8U) #define USB_OTG_DIEPEACHMSK1_TXFURM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */ #define USB_OTG_DIEPEACHMSK1_TXFURM USB_OTG_DIEPEACHMSK1_TXFURM_Msk /*!< FIFO underrun mask */ -#define USB_OTG_DIEPEACHMSK1_BIM_Pos (9U) +#define USB_OTG_DIEPEACHMSK1_BIM_Pos (9U) #define USB_OTG_DIEPEACHMSK1_BIM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DIEPEACHMSK1_BIM USB_OTG_DIEPEACHMSK1_BIM_Msk /*!< BNA interrupt mask */ -#define USB_OTG_DIEPEACHMSK1_NAKM_Pos (13U) +#define USB_OTG_DIEPEACHMSK1_NAKM_Pos (13U) #define USB_OTG_DIEPEACHMSK1_NAKM_Msk (0x1UL << USB_OTG_DIEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */ #define USB_OTG_DIEPEACHMSK1_NAKM USB_OTG_DIEPEACHMSK1_NAKM_Msk /*!< NAK interrupt mask */ /******************** Bit definition for USB_OTG_HPRT register ********************/ -#define USB_OTG_HPRT_PCSTS_Pos (0U) +#define USB_OTG_HPRT_PCSTS_Pos (0U) #define USB_OTG_HPRT_PCSTS_Msk (0x1UL << USB_OTG_HPRT_PCSTS_Pos) /*!< 0x00000001 */ #define USB_OTG_HPRT_PCSTS USB_OTG_HPRT_PCSTS_Msk /*!< Port connect status */ -#define USB_OTG_HPRT_PCDET_Pos (1U) +#define USB_OTG_HPRT_PCDET_Pos (1U) #define USB_OTG_HPRT_PCDET_Msk (0x1UL << USB_OTG_HPRT_PCDET_Pos) /*!< 0x00000002 */ #define USB_OTG_HPRT_PCDET USB_OTG_HPRT_PCDET_Msk /*!< Port connect detected */ -#define USB_OTG_HPRT_PENA_Pos (2U) +#define USB_OTG_HPRT_PENA_Pos (2U) #define USB_OTG_HPRT_PENA_Msk (0x1UL << USB_OTG_HPRT_PENA_Pos) /*!< 0x00000004 */ #define USB_OTG_HPRT_PENA USB_OTG_HPRT_PENA_Msk /*!< Port enable */ -#define USB_OTG_HPRT_PENCHNG_Pos (3U) +#define USB_OTG_HPRT_PENCHNG_Pos (3U) #define USB_OTG_HPRT_PENCHNG_Msk (0x1UL << USB_OTG_HPRT_PENCHNG_Pos) /*!< 0x00000008 */ #define USB_OTG_HPRT_PENCHNG USB_OTG_HPRT_PENCHNG_Msk /*!< Port enable/disable change */ -#define USB_OTG_HPRT_POCA_Pos (4U) +#define USB_OTG_HPRT_POCA_Pos (4U) #define USB_OTG_HPRT_POCA_Msk (0x1UL << USB_OTG_HPRT_POCA_Pos) /*!< 0x00000010 */ #define USB_OTG_HPRT_POCA USB_OTG_HPRT_POCA_Msk /*!< Port overcurrent active */ -#define USB_OTG_HPRT_POCCHNG_Pos (5U) +#define USB_OTG_HPRT_POCCHNG_Pos (5U) #define USB_OTG_HPRT_POCCHNG_Msk (0x1UL << USB_OTG_HPRT_POCCHNG_Pos) /*!< 0x00000020 */ #define USB_OTG_HPRT_POCCHNG USB_OTG_HPRT_POCCHNG_Msk /*!< Port overcurrent change */ -#define USB_OTG_HPRT_PRES_Pos (6U) +#define USB_OTG_HPRT_PRES_Pos (6U) #define USB_OTG_HPRT_PRES_Msk (0x1UL << USB_OTG_HPRT_PRES_Pos) /*!< 0x00000040 */ #define USB_OTG_HPRT_PRES USB_OTG_HPRT_PRES_Msk /*!< Port resume */ -#define USB_OTG_HPRT_PSUSP_Pos (7U) +#define USB_OTG_HPRT_PSUSP_Pos (7U) #define USB_OTG_HPRT_PSUSP_Msk (0x1UL << USB_OTG_HPRT_PSUSP_Pos) /*!< 0x00000080 */ #define USB_OTG_HPRT_PSUSP USB_OTG_HPRT_PSUSP_Msk /*!< Port suspend */ -#define USB_OTG_HPRT_PRST_Pos (8U) +#define USB_OTG_HPRT_PRST_Pos (8U) #define USB_OTG_HPRT_PRST_Msk (0x1UL << USB_OTG_HPRT_PRST_Pos) /*!< 0x00000100 */ #define USB_OTG_HPRT_PRST USB_OTG_HPRT_PRST_Msk /*!< Port reset */ -#define USB_OTG_HPRT_PLSTS_Pos (10U) +#define USB_OTG_HPRT_PLSTS_Pos (10U) #define USB_OTG_HPRT_PLSTS_Msk (0x3UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000C00 */ #define USB_OTG_HPRT_PLSTS USB_OTG_HPRT_PLSTS_Msk /*!< Port line status */ #define USB_OTG_HPRT_PLSTS_0 (0x1UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000400 */ #define USB_OTG_HPRT_PLSTS_1 (0x2UL << USB_OTG_HPRT_PLSTS_Pos) /*!< 0x00000800 */ -#define USB_OTG_HPRT_PPWR_Pos (12U) +#define USB_OTG_HPRT_PPWR_Pos (12U) #define USB_OTG_HPRT_PPWR_Msk (0x1UL << USB_OTG_HPRT_PPWR_Pos) /*!< 0x00001000 */ #define USB_OTG_HPRT_PPWR USB_OTG_HPRT_PPWR_Msk /*!< Port power */ -#define USB_OTG_HPRT_PTCTL_Pos (13U) +#define USB_OTG_HPRT_PTCTL_Pos (13U) #define USB_OTG_HPRT_PTCTL_Msk (0xFUL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x0001E000 */ #define USB_OTG_HPRT_PTCTL USB_OTG_HPRT_PTCTL_Msk /*!< Port test control */ #define USB_OTG_HPRT_PTCTL_0 (0x1UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00002000 */ @@ -972,136 +972,136 @@ typedef struct #define USB_OTG_HPRT_PTCTL_2 (0x4UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00008000 */ #define USB_OTG_HPRT_PTCTL_3 (0x8UL << USB_OTG_HPRT_PTCTL_Pos) /*!< 0x00010000 */ -#define USB_OTG_HPRT_PSPD_Pos (17U) +#define USB_OTG_HPRT_PSPD_Pos (17U) #define USB_OTG_HPRT_PSPD_Msk (0x3UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00060000 */ #define USB_OTG_HPRT_PSPD USB_OTG_HPRT_PSPD_Msk /*!< Port speed */ #define USB_OTG_HPRT_PSPD_0 (0x1UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00020000 */ #define USB_OTG_HPRT_PSPD_1 (0x2UL << USB_OTG_HPRT_PSPD_Pos) /*!< 0x00040000 */ /******************** Bit definition for USB_OTG_DOEPEACHMSK1 register ********************/ -#define USB_OTG_DOEPEACHMSK1_XFRCM_Pos (0U) +#define USB_OTG_DOEPEACHMSK1_XFRCM_Pos (0U) #define USB_OTG_DOEPEACHMSK1_XFRCM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_DOEPEACHMSK1_XFRCM USB_OTG_DOEPEACHMSK1_XFRCM_Msk /*!< Transfer completed interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_EPDM_Pos (1U) +#define USB_OTG_DOEPEACHMSK1_EPDM_Pos (1U) #define USB_OTG_DOEPEACHMSK1_EPDM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_EPDM_Pos) /*!< 0x00000002 */ #define USB_OTG_DOEPEACHMSK1_EPDM USB_OTG_DOEPEACHMSK1_EPDM_Msk /*!< Endpoint disabled interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_TOM_Pos (3U) +#define USB_OTG_DOEPEACHMSK1_TOM_Pos (3U) #define USB_OTG_DOEPEACHMSK1_TOM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_TOM_Pos) /*!< 0x00000008 */ #define USB_OTG_DOEPEACHMSK1_TOM USB_OTG_DOEPEACHMSK1_TOM_Msk /*!< Timeout condition mask */ -#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos (4U) +#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos (4U) #define USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Pos) /*!< 0x00000010 */ #define USB_OTG_DOEPEACHMSK1_ITTXFEMSK USB_OTG_DOEPEACHMSK1_ITTXFEMSK_Msk /*!< IN token received when TxFIFO empty mask */ -#define USB_OTG_DOEPEACHMSK1_INEPNMM_Pos (5U) +#define USB_OTG_DOEPEACHMSK1_INEPNMM_Pos (5U) #define USB_OTG_DOEPEACHMSK1_INEPNMM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNMM_Pos) /*!< 0x00000020 */ #define USB_OTG_DOEPEACHMSK1_INEPNMM USB_OTG_DOEPEACHMSK1_INEPNMM_Msk /*!< IN token received with EP mismatch mask */ -#define USB_OTG_DOEPEACHMSK1_INEPNEM_Pos (6U) +#define USB_OTG_DOEPEACHMSK1_INEPNEM_Pos (6U) #define USB_OTG_DOEPEACHMSK1_INEPNEM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_INEPNEM_Pos) /*!< 0x00000040 */ #define USB_OTG_DOEPEACHMSK1_INEPNEM USB_OTG_DOEPEACHMSK1_INEPNEM_Msk /*!< IN endpoint NAK effective mask */ -#define USB_OTG_DOEPEACHMSK1_TXFURM_Pos (8U) +#define USB_OTG_DOEPEACHMSK1_TXFURM_Pos (8U) #define USB_OTG_DOEPEACHMSK1_TXFURM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_TXFURM_Pos) /*!< 0x00000100 */ #define USB_OTG_DOEPEACHMSK1_TXFURM USB_OTG_DOEPEACHMSK1_TXFURM_Msk /*!< OUT packet error mask */ -#define USB_OTG_DOEPEACHMSK1_BIM_Pos (9U) +#define USB_OTG_DOEPEACHMSK1_BIM_Pos (9U) #define USB_OTG_DOEPEACHMSK1_BIM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_BIM_Pos) /*!< 0x00000200 */ #define USB_OTG_DOEPEACHMSK1_BIM USB_OTG_DOEPEACHMSK1_BIM_Msk /*!< BNA interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_BERRM_Pos (12U) +#define USB_OTG_DOEPEACHMSK1_BERRM_Pos (12U) #define USB_OTG_DOEPEACHMSK1_BERRM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_BERRM_Pos) /*!< 0x00001000 */ #define USB_OTG_DOEPEACHMSK1_BERRM USB_OTG_DOEPEACHMSK1_BERRM_Msk /*!< Bubble error interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_NAKM_Pos (13U) +#define USB_OTG_DOEPEACHMSK1_NAKM_Pos (13U) #define USB_OTG_DOEPEACHMSK1_NAKM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_NAKM_Pos) /*!< 0x00002000 */ #define USB_OTG_DOEPEACHMSK1_NAKM USB_OTG_DOEPEACHMSK1_NAKM_Msk /*!< NAK interrupt mask */ -#define USB_OTG_DOEPEACHMSK1_NYETM_Pos (14U) +#define USB_OTG_DOEPEACHMSK1_NYETM_Pos (14U) #define USB_OTG_DOEPEACHMSK1_NYETM_Msk (0x1UL << USB_OTG_DOEPEACHMSK1_NYETM_Pos) /*!< 0x00004000 */ #define USB_OTG_DOEPEACHMSK1_NYETM USB_OTG_DOEPEACHMSK1_NYETM_Msk /*!< NYET interrupt mask */ /******************** Bit definition for USB_OTG_HPTXFSIZ register ********************/ -#define USB_OTG_HPTXFSIZ_PTXSA_Pos (0U) +#define USB_OTG_HPTXFSIZ_PTXSA_Pos (0U) #define USB_OTG_HPTXFSIZ_PTXSA_Msk (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_HPTXFSIZ_PTXSA USB_OTG_HPTXFSIZ_PTXSA_Msk /*!< Host periodic TxFIFO start address */ -#define USB_OTG_HPTXFSIZ_PTXFD_Pos (16U) +#define USB_OTG_HPTXFSIZ_PTXFD_Pos (16U) #define USB_OTG_HPTXFSIZ_PTXFD_Msk (0xFFFFUL << USB_OTG_HPTXFSIZ_PTXFD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_HPTXFSIZ_PTXFD USB_OTG_HPTXFSIZ_PTXFD_Msk /*!< Host periodic TxFIFO depth */ /******************** Bit definition for USB_OTG_DIEPCTL register ********************/ -#define USB_OTG_DIEPCTL_MPSIZ_Pos (0U) +#define USB_OTG_DIEPCTL_MPSIZ_Pos (0U) #define USB_OTG_DIEPCTL_MPSIZ_Msk (0x7FFUL << USB_OTG_DIEPCTL_MPSIZ_Pos) /*!< 0x000007FF */ #define USB_OTG_DIEPCTL_MPSIZ USB_OTG_DIEPCTL_MPSIZ_Msk /*!< Maximum packet size */ -#define USB_OTG_DIEPCTL_USBAEP_Pos (15U) +#define USB_OTG_DIEPCTL_USBAEP_Pos (15U) #define USB_OTG_DIEPCTL_USBAEP_Msk (0x1UL << USB_OTG_DIEPCTL_USBAEP_Pos) /*!< 0x00008000 */ #define USB_OTG_DIEPCTL_USBAEP USB_OTG_DIEPCTL_USBAEP_Msk /*!< USB active endpoint */ -#define USB_OTG_DIEPCTL_EONUM_DPID_Pos (16U) +#define USB_OTG_DIEPCTL_EONUM_DPID_Pos (16U) #define USB_OTG_DIEPCTL_EONUM_DPID_Msk (0x1UL << USB_OTG_DIEPCTL_EONUM_DPID_Pos) /*!< 0x00010000 */ #define USB_OTG_DIEPCTL_EONUM_DPID USB_OTG_DIEPCTL_EONUM_DPID_Msk /*!< Even/odd frame */ -#define USB_OTG_DIEPCTL_NAKSTS_Pos (17U) +#define USB_OTG_DIEPCTL_NAKSTS_Pos (17U) #define USB_OTG_DIEPCTL_NAKSTS_Msk (0x1UL << USB_OTG_DIEPCTL_NAKSTS_Pos) /*!< 0x00020000 */ #define USB_OTG_DIEPCTL_NAKSTS USB_OTG_DIEPCTL_NAKSTS_Msk /*!< NAK status */ -#define USB_OTG_DIEPCTL_EPTYP_Pos (18U) +#define USB_OTG_DIEPCTL_EPTYP_Pos (18U) #define USB_OTG_DIEPCTL_EPTYP_Msk (0x3UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x000C0000 */ #define USB_OTG_DIEPCTL_EPTYP USB_OTG_DIEPCTL_EPTYP_Msk /*!< Endpoint type */ #define USB_OTG_DIEPCTL_EPTYP_0 (0x1UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00040000 */ #define USB_OTG_DIEPCTL_EPTYP_1 (0x2UL << USB_OTG_DIEPCTL_EPTYP_Pos) /*!< 0x00080000 */ -#define USB_OTG_DIEPCTL_STALL_Pos (21U) +#define USB_OTG_DIEPCTL_STALL_Pos (21U) #define USB_OTG_DIEPCTL_STALL_Msk (0x1UL << USB_OTG_DIEPCTL_STALL_Pos) /*!< 0x00200000 */ #define USB_OTG_DIEPCTL_STALL USB_OTG_DIEPCTL_STALL_Msk /*!< STALL handshake */ -#define USB_OTG_DIEPCTL_TXFNUM_Pos (22U) +#define USB_OTG_DIEPCTL_TXFNUM_Pos (22U) #define USB_OTG_DIEPCTL_TXFNUM_Msk (0xFUL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x03C00000 */ #define USB_OTG_DIEPCTL_TXFNUM USB_OTG_DIEPCTL_TXFNUM_Msk /*!< TxFIFO number */ #define USB_OTG_DIEPCTL_TXFNUM_0 (0x1UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00400000 */ #define USB_OTG_DIEPCTL_TXFNUM_1 (0x2UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x00800000 */ #define USB_OTG_DIEPCTL_TXFNUM_2 (0x4UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x01000000 */ #define USB_OTG_DIEPCTL_TXFNUM_3 (0x8UL << USB_OTG_DIEPCTL_TXFNUM_Pos) /*!< 0x02000000 */ -#define USB_OTG_DIEPCTL_CNAK_Pos (26U) +#define USB_OTG_DIEPCTL_CNAK_Pos (26U) #define USB_OTG_DIEPCTL_CNAK_Msk (0x1UL << USB_OTG_DIEPCTL_CNAK_Pos) /*!< 0x04000000 */ #define USB_OTG_DIEPCTL_CNAK USB_OTG_DIEPCTL_CNAK_Msk /*!< Clear NAK */ -#define USB_OTG_DIEPCTL_SNAK_Pos (27U) +#define USB_OTG_DIEPCTL_SNAK_Pos (27U) #define USB_OTG_DIEPCTL_SNAK_Msk (0x1UL << USB_OTG_DIEPCTL_SNAK_Pos) /*!< 0x08000000 */ #define USB_OTG_DIEPCTL_SNAK USB_OTG_DIEPCTL_SNAK_Msk /*!< Set NAK */ -#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos (28U) +#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos (28U) #define USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk (0x1UL << USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Pos) /*!< 0x10000000 */ #define USB_OTG_DIEPCTL_SD0PID_SEVNFRM USB_OTG_DIEPCTL_SD0PID_SEVNFRM_Msk /*!< Set DATA0 PID */ -#define USB_OTG_DIEPCTL_SODDFRM_Pos (29U) +#define USB_OTG_DIEPCTL_SODDFRM_Pos (29U) #define USB_OTG_DIEPCTL_SODDFRM_Msk (0x1UL << USB_OTG_DIEPCTL_SODDFRM_Pos) /*!< 0x20000000 */ #define USB_OTG_DIEPCTL_SODDFRM USB_OTG_DIEPCTL_SODDFRM_Msk /*!< Set odd frame */ -#define USB_OTG_DIEPCTL_EPDIS_Pos (30U) +#define USB_OTG_DIEPCTL_EPDIS_Pos (30U) #define USB_OTG_DIEPCTL_EPDIS_Msk (0x1UL << USB_OTG_DIEPCTL_EPDIS_Pos) /*!< 0x40000000 */ #define USB_OTG_DIEPCTL_EPDIS USB_OTG_DIEPCTL_EPDIS_Msk /*!< Endpoint disable */ -#define USB_OTG_DIEPCTL_EPENA_Pos (31U) +#define USB_OTG_DIEPCTL_EPENA_Pos (31U) #define USB_OTG_DIEPCTL_EPENA_Msk (0x1UL << USB_OTG_DIEPCTL_EPENA_Pos) /*!< 0x80000000 */ #define USB_OTG_DIEPCTL_EPENA USB_OTG_DIEPCTL_EPENA_Msk /*!< Endpoint enable */ /******************** Bit definition for USB_OTG_HCCHAR register ********************/ -#define USB_OTG_HCCHAR_MPSIZ_Pos (0U) +#define USB_OTG_HCCHAR_MPSIZ_Pos (0U) #define USB_OTG_HCCHAR_MPSIZ_Msk (0x7FFUL << USB_OTG_HCCHAR_MPSIZ_Pos) /*!< 0x000007FF */ #define USB_OTG_HCCHAR_MPSIZ USB_OTG_HCCHAR_MPSIZ_Msk /*!< Maximum packet size */ -#define USB_OTG_HCCHAR_EPNUM_Pos (11U) +#define USB_OTG_HCCHAR_EPNUM_Pos (11U) #define USB_OTG_HCCHAR_EPNUM_Msk (0xFUL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00007800 */ #define USB_OTG_HCCHAR_EPNUM USB_OTG_HCCHAR_EPNUM_Msk /*!< Endpoint number */ #define USB_OTG_HCCHAR_EPNUM_0 (0x1UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00000800 */ #define USB_OTG_HCCHAR_EPNUM_1 (0x2UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00001000 */ #define USB_OTG_HCCHAR_EPNUM_2 (0x4UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00002000 */ #define USB_OTG_HCCHAR_EPNUM_3 (0x8UL << USB_OTG_HCCHAR_EPNUM_Pos) /*!< 0x00004000 */ -#define USB_OTG_HCCHAR_EPDIR_Pos (15U) +#define USB_OTG_HCCHAR_EPDIR_Pos (15U) #define USB_OTG_HCCHAR_EPDIR_Msk (0x1UL << USB_OTG_HCCHAR_EPDIR_Pos) /*!< 0x00008000 */ #define USB_OTG_HCCHAR_EPDIR USB_OTG_HCCHAR_EPDIR_Msk /*!< Endpoint direction */ -#define USB_OTG_HCCHAR_LSDEV_Pos (17U) +#define USB_OTG_HCCHAR_LSDEV_Pos (17U) #define USB_OTG_HCCHAR_LSDEV_Msk (0x1UL << USB_OTG_HCCHAR_LSDEV_Pos) /*!< 0x00020000 */ #define USB_OTG_HCCHAR_LSDEV USB_OTG_HCCHAR_LSDEV_Msk /*!< Low-speed device */ -#define USB_OTG_HCCHAR_EPTYP_Pos (18U) +#define USB_OTG_HCCHAR_EPTYP_Pos (18U) #define USB_OTG_HCCHAR_EPTYP_Msk (0x3UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x000C0000 */ #define USB_OTG_HCCHAR_EPTYP USB_OTG_HCCHAR_EPTYP_Msk /*!< Endpoint type */ #define USB_OTG_HCCHAR_EPTYP_0 (0x1UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00040000 */ #define USB_OTG_HCCHAR_EPTYP_1 (0x2UL << USB_OTG_HCCHAR_EPTYP_Pos) /*!< 0x00080000 */ - -#define USB_OTG_HCCHAR_MC_Pos (20U) + +#define USB_OTG_HCCHAR_MC_Pos (20U) #define USB_OTG_HCCHAR_MC_Msk (0x3UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00300000 */ #define USB_OTG_HCCHAR_MC USB_OTG_HCCHAR_MC_Msk /*!< Multi Count (MC) / Error Count (EC) */ #define USB_OTG_HCCHAR_MC_0 (0x1UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00100000 */ #define USB_OTG_HCCHAR_MC_1 (0x2UL << USB_OTG_HCCHAR_MC_Pos) /*!< 0x00200000 */ -#define USB_OTG_HCCHAR_DAD_Pos (22U) +#define USB_OTG_HCCHAR_DAD_Pos (22U) #define USB_OTG_HCCHAR_DAD_Msk (0x7FUL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x1FC00000 */ #define USB_OTG_HCCHAR_DAD USB_OTG_HCCHAR_DAD_Msk /*!< Device address */ #define USB_OTG_HCCHAR_DAD_0 (0x01UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x00400000 */ @@ -1111,19 +1111,19 @@ typedef struct #define USB_OTG_HCCHAR_DAD_4 (0x10UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x04000000 */ #define USB_OTG_HCCHAR_DAD_5 (0x20UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x08000000 */ #define USB_OTG_HCCHAR_DAD_6 (0x40UL << USB_OTG_HCCHAR_DAD_Pos) /*!< 0x10000000 */ -#define USB_OTG_HCCHAR_ODDFRM_Pos (29U) +#define USB_OTG_HCCHAR_ODDFRM_Pos (29U) #define USB_OTG_HCCHAR_ODDFRM_Msk (0x1UL << USB_OTG_HCCHAR_ODDFRM_Pos) /*!< 0x20000000 */ #define USB_OTG_HCCHAR_ODDFRM USB_OTG_HCCHAR_ODDFRM_Msk /*!< Odd frame */ -#define USB_OTG_HCCHAR_CHDIS_Pos (30U) +#define USB_OTG_HCCHAR_CHDIS_Pos (30U) #define USB_OTG_HCCHAR_CHDIS_Msk (0x1UL << USB_OTG_HCCHAR_CHDIS_Pos) /*!< 0x40000000 */ #define USB_OTG_HCCHAR_CHDIS USB_OTG_HCCHAR_CHDIS_Msk /*!< Channel disable */ -#define USB_OTG_HCCHAR_CHENA_Pos (31U) +#define USB_OTG_HCCHAR_CHENA_Pos (31U) #define USB_OTG_HCCHAR_CHENA_Msk (0x1UL << USB_OTG_HCCHAR_CHENA_Pos) /*!< 0x80000000 */ #define USB_OTG_HCCHAR_CHENA USB_OTG_HCCHAR_CHENA_Msk /*!< Channel enable */ /******************** Bit definition for USB_OTG_HCSPLT register ********************/ -#define USB_OTG_HCSPLT_PRTADDR_Pos (0U) +#define USB_OTG_HCSPLT_PRTADDR_Pos (0U) #define USB_OTG_HCSPLT_PRTADDR_Msk (0x7FUL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x0000007F */ #define USB_OTG_HCSPLT_PRTADDR USB_OTG_HCSPLT_PRTADDR_Msk /*!< Port address */ #define USB_OTG_HCSPLT_PRTADDR_0 (0x01UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000001 */ @@ -1134,7 +1134,7 @@ typedef struct #define USB_OTG_HCSPLT_PRTADDR_5 (0x20UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000020 */ #define USB_OTG_HCSPLT_PRTADDR_6 (0x40UL << USB_OTG_HCSPLT_PRTADDR_Pos) /*!< 0x00000040 */ -#define USB_OTG_HCSPLT_HUBADDR_Pos (7U) +#define USB_OTG_HCSPLT_HUBADDR_Pos (7U) #define USB_OTG_HCSPLT_HUBADDR_Msk (0x7FUL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00003F80 */ #define USB_OTG_HCSPLT_HUBADDR USB_OTG_HCSPLT_HUBADDR_Msk /*!< Hub address */ #define USB_OTG_HCSPLT_HUBADDR_0 (0x01UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00000080 */ @@ -1145,240 +1145,240 @@ typedef struct #define USB_OTG_HCSPLT_HUBADDR_5 (0x20UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00001000 */ #define USB_OTG_HCSPLT_HUBADDR_6 (0x40UL << USB_OTG_HCSPLT_HUBADDR_Pos) /*!< 0x00002000 */ -#define USB_OTG_HCSPLT_XACTPOS_Pos (14U) +#define USB_OTG_HCSPLT_XACTPOS_Pos (14U) #define USB_OTG_HCSPLT_XACTPOS_Msk (0x3UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x0000C000 */ #define USB_OTG_HCSPLT_XACTPOS USB_OTG_HCSPLT_XACTPOS_Msk /*!< XACTPOS */ #define USB_OTG_HCSPLT_XACTPOS_0 (0x1UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00004000 */ #define USB_OTG_HCSPLT_XACTPOS_1 (0x2UL << USB_OTG_HCSPLT_XACTPOS_Pos) /*!< 0x00008000 */ -#define USB_OTG_HCSPLT_COMPLSPLT_Pos (16U) +#define USB_OTG_HCSPLT_COMPLSPLT_Pos (16U) #define USB_OTG_HCSPLT_COMPLSPLT_Msk (0x1UL << USB_OTG_HCSPLT_COMPLSPLT_Pos) /*!< 0x00010000 */ #define USB_OTG_HCSPLT_COMPLSPLT USB_OTG_HCSPLT_COMPLSPLT_Msk /*!< Do complete split */ -#define USB_OTG_HCSPLT_SPLITEN_Pos (31U) +#define USB_OTG_HCSPLT_SPLITEN_Pos (31U) #define USB_OTG_HCSPLT_SPLITEN_Msk (0x1UL << USB_OTG_HCSPLT_SPLITEN_Pos) /*!< 0x80000000 */ #define USB_OTG_HCSPLT_SPLITEN USB_OTG_HCSPLT_SPLITEN_Msk /*!< Split enable */ /******************** Bit definition for USB_OTG_HCINT register ********************/ -#define USB_OTG_HCINT_XFRC_Pos (0U) +#define USB_OTG_HCINT_XFRC_Pos (0U) #define USB_OTG_HCINT_XFRC_Msk (0x1UL << USB_OTG_HCINT_XFRC_Pos) /*!< 0x00000001 */ #define USB_OTG_HCINT_XFRC USB_OTG_HCINT_XFRC_Msk /*!< Transfer completed */ -#define USB_OTG_HCINT_CHH_Pos (1U) +#define USB_OTG_HCINT_CHH_Pos (1U) #define USB_OTG_HCINT_CHH_Msk (0x1UL << USB_OTG_HCINT_CHH_Pos) /*!< 0x00000002 */ #define USB_OTG_HCINT_CHH USB_OTG_HCINT_CHH_Msk /*!< Channel halted */ -#define USB_OTG_HCINT_AHBERR_Pos (2U) +#define USB_OTG_HCINT_AHBERR_Pos (2U) #define USB_OTG_HCINT_AHBERR_Msk (0x1UL << USB_OTG_HCINT_AHBERR_Pos) /*!< 0x00000004 */ #define USB_OTG_HCINT_AHBERR USB_OTG_HCINT_AHBERR_Msk /*!< AHB error */ -#define USB_OTG_HCINT_STALL_Pos (3U) +#define USB_OTG_HCINT_STALL_Pos (3U) #define USB_OTG_HCINT_STALL_Msk (0x1UL << USB_OTG_HCINT_STALL_Pos) /*!< 0x00000008 */ #define USB_OTG_HCINT_STALL USB_OTG_HCINT_STALL_Msk /*!< STALL response received interrupt */ -#define USB_OTG_HCINT_NAK_Pos (4U) +#define USB_OTG_HCINT_NAK_Pos (4U) #define USB_OTG_HCINT_NAK_Msk (0x1UL << USB_OTG_HCINT_NAK_Pos) /*!< 0x00000010 */ #define USB_OTG_HCINT_NAK USB_OTG_HCINT_NAK_Msk /*!< NAK response received interrupt */ -#define USB_OTG_HCINT_ACK_Pos (5U) +#define USB_OTG_HCINT_ACK_Pos (5U) #define USB_OTG_HCINT_ACK_Msk (0x1UL << USB_OTG_HCINT_ACK_Pos) /*!< 0x00000020 */ #define USB_OTG_HCINT_ACK USB_OTG_HCINT_ACK_Msk /*!< ACK response received/transmitted interrupt */ -#define USB_OTG_HCINT_NYET_Pos (6U) +#define USB_OTG_HCINT_NYET_Pos (6U) #define USB_OTG_HCINT_NYET_Msk (0x1UL << USB_OTG_HCINT_NYET_Pos) /*!< 0x00000040 */ #define USB_OTG_HCINT_NYET USB_OTG_HCINT_NYET_Msk /*!< Response received interrupt */ -#define USB_OTG_HCINT_TXERR_Pos (7U) +#define USB_OTG_HCINT_TXERR_Pos (7U) #define USB_OTG_HCINT_TXERR_Msk (0x1UL << USB_OTG_HCINT_TXERR_Pos) /*!< 0x00000080 */ #define USB_OTG_HCINT_TXERR USB_OTG_HCINT_TXERR_Msk /*!< Transaction error */ -#define USB_OTG_HCINT_BBERR_Pos (8U) +#define USB_OTG_HCINT_BBERR_Pos (8U) #define USB_OTG_HCINT_BBERR_Msk (0x1UL << USB_OTG_HCINT_BBERR_Pos) /*!< 0x00000100 */ #define USB_OTG_HCINT_BBERR USB_OTG_HCINT_BBERR_Msk /*!< Babble error */ -#define USB_OTG_HCINT_FRMOR_Pos (9U) +#define USB_OTG_HCINT_FRMOR_Pos (9U) #define USB_OTG_HCINT_FRMOR_Msk (0x1UL << USB_OTG_HCINT_FRMOR_Pos) /*!< 0x00000200 */ #define USB_OTG_HCINT_FRMOR USB_OTG_HCINT_FRMOR_Msk /*!< Frame overrun */ -#define USB_OTG_HCINT_DTERR_Pos (10U) +#define USB_OTG_HCINT_DTERR_Pos (10U) #define USB_OTG_HCINT_DTERR_Msk (0x1UL << USB_OTG_HCINT_DTERR_Pos) /*!< 0x00000400 */ #define USB_OTG_HCINT_DTERR USB_OTG_HCINT_DTERR_Msk /*!< Data toggle error */ /******************** Bit definition for USB_OTG_DIEPINT register ********************/ -#define USB_OTG_DIEPINT_XFRC_Pos (0U) +#define USB_OTG_DIEPINT_XFRC_Pos (0U) #define USB_OTG_DIEPINT_XFRC_Msk (0x1UL << USB_OTG_DIEPINT_XFRC_Pos) /*!< 0x00000001 */ #define USB_OTG_DIEPINT_XFRC USB_OTG_DIEPINT_XFRC_Msk /*!< Transfer completed interrupt */ -#define USB_OTG_DIEPINT_EPDISD_Pos (1U) +#define USB_OTG_DIEPINT_EPDISD_Pos (1U) #define USB_OTG_DIEPINT_EPDISD_Msk (0x1UL << USB_OTG_DIEPINT_EPDISD_Pos) /*!< 0x00000002 */ #define USB_OTG_DIEPINT_EPDISD USB_OTG_DIEPINT_EPDISD_Msk /*!< Endpoint disabled interrupt */ #define USB_OTG_DIEPINT_AHBERR_Pos (2U) #define USB_OTG_DIEPINT_AHBERR_Msk (0x1UL << USB_OTG_DIEPINT_AHBERR_Pos) /*!< 0x00000004 */ #define USB_OTG_DIEPINT_AHBERR USB_OTG_DIEPINT_AHBERR_Msk /*!< AHB Error (AHBErr) during an IN transaction */ -#define USB_OTG_DIEPINT_TOC_Pos (3U) +#define USB_OTG_DIEPINT_TOC_Pos (3U) #define USB_OTG_DIEPINT_TOC_Msk (0x1UL << USB_OTG_DIEPINT_TOC_Pos) /*!< 0x00000008 */ #define USB_OTG_DIEPINT_TOC USB_OTG_DIEPINT_TOC_Msk /*!< Timeout condition */ -#define USB_OTG_DIEPINT_ITTXFE_Pos (4U) +#define USB_OTG_DIEPINT_ITTXFE_Pos (4U) #define USB_OTG_DIEPINT_ITTXFE_Msk (0x1UL << USB_OTG_DIEPINT_ITTXFE_Pos) /*!< 0x00000010 */ #define USB_OTG_DIEPINT_ITTXFE USB_OTG_DIEPINT_ITTXFE_Msk /*!< IN token received when TxFIFO is empty */ #define USB_OTG_DIEPINT_INEPNM_Pos (5U) #define USB_OTG_DIEPINT_INEPNM_Msk (0x1UL << USB_OTG_DIEPINT_INEPNM_Pos) /*!< 0x00000004 */ #define USB_OTG_DIEPINT_INEPNM USB_OTG_DIEPINT_INEPNM_Msk /*!< IN token received with EP mismatch */ -#define USB_OTG_DIEPINT_INEPNE_Pos (6U) +#define USB_OTG_DIEPINT_INEPNE_Pos (6U) #define USB_OTG_DIEPINT_INEPNE_Msk (0x1UL << USB_OTG_DIEPINT_INEPNE_Pos) /*!< 0x00000040 */ #define USB_OTG_DIEPINT_INEPNE USB_OTG_DIEPINT_INEPNE_Msk /*!< IN endpoint NAK effective */ -#define USB_OTG_DIEPINT_TXFE_Pos (7U) +#define USB_OTG_DIEPINT_TXFE_Pos (7U) #define USB_OTG_DIEPINT_TXFE_Msk (0x1UL << USB_OTG_DIEPINT_TXFE_Pos) /*!< 0x00000080 */ #define USB_OTG_DIEPINT_TXFE USB_OTG_DIEPINT_TXFE_Msk /*!< Transmit FIFO empty */ -#define USB_OTG_DIEPINT_TXFIFOUDRN_Pos (8U) +#define USB_OTG_DIEPINT_TXFIFOUDRN_Pos (8U) #define USB_OTG_DIEPINT_TXFIFOUDRN_Msk (0x1UL << USB_OTG_DIEPINT_TXFIFOUDRN_Pos) /*!< 0x00000100 */ #define USB_OTG_DIEPINT_TXFIFOUDRN USB_OTG_DIEPINT_TXFIFOUDRN_Msk /*!< Transmit Fifo Underrun */ -#define USB_OTG_DIEPINT_BNA_Pos (9U) +#define USB_OTG_DIEPINT_BNA_Pos (9U) #define USB_OTG_DIEPINT_BNA_Msk (0x1UL << USB_OTG_DIEPINT_BNA_Pos) /*!< 0x00000200 */ #define USB_OTG_DIEPINT_BNA USB_OTG_DIEPINT_BNA_Msk /*!< Buffer not available interrupt */ -#define USB_OTG_DIEPINT_PKTDRPSTS_Pos (11U) +#define USB_OTG_DIEPINT_PKTDRPSTS_Pos (11U) #define USB_OTG_DIEPINT_PKTDRPSTS_Msk (0x1UL << USB_OTG_DIEPINT_PKTDRPSTS_Pos) /*!< 0x00000800 */ #define USB_OTG_DIEPINT_PKTDRPSTS USB_OTG_DIEPINT_PKTDRPSTS_Msk /*!< Packet dropped status */ -#define USB_OTG_DIEPINT_BERR_Pos (12U) +#define USB_OTG_DIEPINT_BERR_Pos (12U) #define USB_OTG_DIEPINT_BERR_Msk (0x1UL << USB_OTG_DIEPINT_BERR_Pos) /*!< 0x00001000 */ #define USB_OTG_DIEPINT_BERR USB_OTG_DIEPINT_BERR_Msk /*!< Babble error interrupt */ -#define USB_OTG_DIEPINT_NAK_Pos (13U) +#define USB_OTG_DIEPINT_NAK_Pos (13U) #define USB_OTG_DIEPINT_NAK_Msk (0x1UL << USB_OTG_DIEPINT_NAK_Pos) /*!< 0x00002000 */ #define USB_OTG_DIEPINT_NAK USB_OTG_DIEPINT_NAK_Msk /*!< NAK interrupt */ /******************** Bit definition for USB_OTG_HCINTMSK register ********************/ -#define USB_OTG_HCINTMSK_XFRCM_Pos (0U) +#define USB_OTG_HCINTMSK_XFRCM_Pos (0U) #define USB_OTG_HCINTMSK_XFRCM_Msk (0x1UL << USB_OTG_HCINTMSK_XFRCM_Pos) /*!< 0x00000001 */ #define USB_OTG_HCINTMSK_XFRCM USB_OTG_HCINTMSK_XFRCM_Msk /*!< Transfer completed mask */ -#define USB_OTG_HCINTMSK_CHHM_Pos (1U) +#define USB_OTG_HCINTMSK_CHHM_Pos (1U) #define USB_OTG_HCINTMSK_CHHM_Msk (0x1UL << USB_OTG_HCINTMSK_CHHM_Pos) /*!< 0x00000002 */ #define USB_OTG_HCINTMSK_CHHM USB_OTG_HCINTMSK_CHHM_Msk /*!< Channel halted mask */ -#define USB_OTG_HCINTMSK_AHBERR_Pos (2U) +#define USB_OTG_HCINTMSK_AHBERR_Pos (2U) #define USB_OTG_HCINTMSK_AHBERR_Msk (0x1UL << USB_OTG_HCINTMSK_AHBERR_Pos) /*!< 0x00000004 */ #define USB_OTG_HCINTMSK_AHBERR USB_OTG_HCINTMSK_AHBERR_Msk /*!< AHB error */ -#define USB_OTG_HCINTMSK_STALLM_Pos (3U) +#define USB_OTG_HCINTMSK_STALLM_Pos (3U) #define USB_OTG_HCINTMSK_STALLM_Msk (0x1UL << USB_OTG_HCINTMSK_STALLM_Pos) /*!< 0x00000008 */ #define USB_OTG_HCINTMSK_STALLM USB_OTG_HCINTMSK_STALLM_Msk /*!< STALL response received interrupt mask */ -#define USB_OTG_HCINTMSK_NAKM_Pos (4U) +#define USB_OTG_HCINTMSK_NAKM_Pos (4U) #define USB_OTG_HCINTMSK_NAKM_Msk (0x1UL << USB_OTG_HCINTMSK_NAKM_Pos) /*!< 0x00000010 */ #define USB_OTG_HCINTMSK_NAKM USB_OTG_HCINTMSK_NAKM_Msk /*!< NAK response received interrupt mask */ -#define USB_OTG_HCINTMSK_ACKM_Pos (5U) +#define USB_OTG_HCINTMSK_ACKM_Pos (5U) #define USB_OTG_HCINTMSK_ACKM_Msk (0x1UL << USB_OTG_HCINTMSK_ACKM_Pos) /*!< 0x00000020 */ #define USB_OTG_HCINTMSK_ACKM USB_OTG_HCINTMSK_ACKM_Msk /*!< ACK response received/transmitted interrupt mask */ -#define USB_OTG_HCINTMSK_NYET_Pos (6U) +#define USB_OTG_HCINTMSK_NYET_Pos (6U) #define USB_OTG_HCINTMSK_NYET_Msk (0x1UL << USB_OTG_HCINTMSK_NYET_Pos) /*!< 0x00000040 */ #define USB_OTG_HCINTMSK_NYET USB_OTG_HCINTMSK_NYET_Msk /*!< response received interrupt mask */ -#define USB_OTG_HCINTMSK_TXERRM_Pos (7U) +#define USB_OTG_HCINTMSK_TXERRM_Pos (7U) #define USB_OTG_HCINTMSK_TXERRM_Msk (0x1UL << USB_OTG_HCINTMSK_TXERRM_Pos) /*!< 0x00000080 */ #define USB_OTG_HCINTMSK_TXERRM USB_OTG_HCINTMSK_TXERRM_Msk /*!< Transaction error mask */ -#define USB_OTG_HCINTMSK_BBERRM_Pos (8U) +#define USB_OTG_HCINTMSK_BBERRM_Pos (8U) #define USB_OTG_HCINTMSK_BBERRM_Msk (0x1UL << USB_OTG_HCINTMSK_BBERRM_Pos) /*!< 0x00000100 */ #define USB_OTG_HCINTMSK_BBERRM USB_OTG_HCINTMSK_BBERRM_Msk /*!< Babble error mask */ -#define USB_OTG_HCINTMSK_FRMORM_Pos (9U) +#define USB_OTG_HCINTMSK_FRMORM_Pos (9U) #define USB_OTG_HCINTMSK_FRMORM_Msk (0x1UL << USB_OTG_HCINTMSK_FRMORM_Pos) /*!< 0x00000200 */ #define USB_OTG_HCINTMSK_FRMORM USB_OTG_HCINTMSK_FRMORM_Msk /*!< Frame overrun mask */ -#define USB_OTG_HCINTMSK_DTERRM_Pos (10U) +#define USB_OTG_HCINTMSK_DTERRM_Pos (10U) #define USB_OTG_HCINTMSK_DTERRM_Msk (0x1UL << USB_OTG_HCINTMSK_DTERRM_Pos) /*!< 0x00000400 */ #define USB_OTG_HCINTMSK_DTERRM USB_OTG_HCINTMSK_DTERRM_Msk /*!< Data toggle error mask */ /******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/ -#define USB_OTG_DIEPTSIZ_XFRSIZ_Pos (0U) +#define USB_OTG_DIEPTSIZ_XFRSIZ_Pos (0U) #define USB_OTG_DIEPTSIZ_XFRSIZ_Msk (0x7FFFFUL << USB_OTG_DIEPTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */ #define USB_OTG_DIEPTSIZ_XFRSIZ USB_OTG_DIEPTSIZ_XFRSIZ_Msk /*!< Transfer size */ -#define USB_OTG_DIEPTSIZ_PKTCNT_Pos (19U) +#define USB_OTG_DIEPTSIZ_PKTCNT_Pos (19U) #define USB_OTG_DIEPTSIZ_PKTCNT_Msk (0x3FFUL << USB_OTG_DIEPTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */ #define USB_OTG_DIEPTSIZ_PKTCNT USB_OTG_DIEPTSIZ_PKTCNT_Msk /*!< Packet count */ -#define USB_OTG_DIEPTSIZ_MULCNT_Pos (29U) +#define USB_OTG_DIEPTSIZ_MULCNT_Pos (29U) #define USB_OTG_DIEPTSIZ_MULCNT_Msk (0x3UL << USB_OTG_DIEPTSIZ_MULCNT_Pos) /*!< 0x60000000 */ #define USB_OTG_DIEPTSIZ_MULCNT USB_OTG_DIEPTSIZ_MULCNT_Msk /*!< Packet count */ /******************** Bit definition for USB_OTG_HCTSIZ register ********************/ -#define USB_OTG_HCTSIZ_XFRSIZ_Pos (0U) +#define USB_OTG_HCTSIZ_XFRSIZ_Pos (0U) #define USB_OTG_HCTSIZ_XFRSIZ_Msk (0x7FFFFUL << USB_OTG_HCTSIZ_XFRSIZ_Pos) /*!< 0x0007FFFF */ #define USB_OTG_HCTSIZ_XFRSIZ USB_OTG_HCTSIZ_XFRSIZ_Msk /*!< Transfer size */ -#define USB_OTG_HCTSIZ_PKTCNT_Pos (19U) +#define USB_OTG_HCTSIZ_PKTCNT_Pos (19U) #define USB_OTG_HCTSIZ_PKTCNT_Msk (0x3FFUL << USB_OTG_HCTSIZ_PKTCNT_Pos) /*!< 0x1FF80000 */ #define USB_OTG_HCTSIZ_PKTCNT USB_OTG_HCTSIZ_PKTCNT_Msk /*!< Packet count */ -#define USB_OTG_HCTSIZ_DOPING_Pos (31U) +#define USB_OTG_HCTSIZ_DOPING_Pos (31U) #define USB_OTG_HCTSIZ_DOPING_Msk (0x1UL << USB_OTG_HCTSIZ_DOPING_Pos) /*!< 0x80000000 */ #define USB_OTG_HCTSIZ_DOPING USB_OTG_HCTSIZ_DOPING_Msk /*!< Do PING */ -#define USB_OTG_HCTSIZ_DPID_Pos (29U) +#define USB_OTG_HCTSIZ_DPID_Pos (29U) #define USB_OTG_HCTSIZ_DPID_Msk (0x3UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x60000000 */ #define USB_OTG_HCTSIZ_DPID USB_OTG_HCTSIZ_DPID_Msk /*!< Data PID */ #define USB_OTG_HCTSIZ_DPID_0 (0x1UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x20000000 */ #define USB_OTG_HCTSIZ_DPID_1 (0x2UL << USB_OTG_HCTSIZ_DPID_Pos) /*!< 0x40000000 */ /******************** Bit definition for USB_OTG_DIEPDMA register ********************/ -#define USB_OTG_DIEPDMA_DMAADDR_Pos (0U) +#define USB_OTG_DIEPDMA_DMAADDR_Pos (0U) #define USB_OTG_DIEPDMA_DMAADDR_Msk (0xFFFFFFFFUL << USB_OTG_DIEPDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */ #define USB_OTG_DIEPDMA_DMAADDR USB_OTG_DIEPDMA_DMAADDR_Msk /*!< DMA address */ /******************** Bit definition for USB_OTG_HCDMA register ********************/ -#define USB_OTG_HCDMA_DMAADDR_Pos (0U) +#define USB_OTG_HCDMA_DMAADDR_Pos (0U) #define USB_OTG_HCDMA_DMAADDR_Msk (0xFFFFFFFFUL << USB_OTG_HCDMA_DMAADDR_Pos) /*!< 0xFFFFFFFF */ #define USB_OTG_HCDMA_DMAADDR USB_OTG_HCDMA_DMAADDR_Msk /*!< DMA address */ /******************** Bit definition for USB_OTG_DTXFSTS register ********************/ -#define USB_OTG_DTXFSTS_INEPTFSAV_Pos (0U) +#define USB_OTG_DTXFSTS_INEPTFSAV_Pos (0U) #define USB_OTG_DTXFSTS_INEPTFSAV_Msk (0xFFFFUL << USB_OTG_DTXFSTS_INEPTFSAV_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DTXFSTS_INEPTFSAV USB_OTG_DTXFSTS_INEPTFSAV_Msk /*!< IN endpoint TxFIFO space available */ /******************** Bit definition for USB_OTG_DIEPTXF register ********************/ -#define USB_OTG_DIEPTXF_INEPTXSA_Pos (0U) +#define USB_OTG_DIEPTXF_INEPTXSA_Pos (0U) #define USB_OTG_DIEPTXF_INEPTXSA_Msk (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXSA_Pos) /*!< 0x0000FFFF */ #define USB_OTG_DIEPTXF_INEPTXSA USB_OTG_DIEPTXF_INEPTXSA_Msk /*!< IN endpoint FIFOx transmit RAM start address */ -#define USB_OTG_DIEPTXF_INEPTXFD_Pos (16U) +#define USB_OTG_DIEPTXF_INEPTXFD_Pos (16U) #define USB_OTG_DIEPTXF_INEPTXFD_Msk (0xFFFFUL << USB_OTG_DIEPTXF_INEPTXFD_Pos) /*!< 0xFFFF0000 */ #define USB_OTG_DIEPTXF_INEPTXFD USB_OTG_DIEPTXF_INEPTXFD_Msk /*!< IN endpoint TxFIFO depth */ /******************** Bit definition for USB_OTG_DOEPCTL register ********************/ -#define USB_OTG_DOEPCTL_MPSIZ_Pos (0U) +#define USB_OTG_DOEPCTL_MPSIZ_Pos (0U) #define USB_OTG_DOEPCTL_MPSIZ_Msk (0x7FFUL << USB_OTG_DOEPCTL_MPSIZ_Pos) /*!< 0x000007FF */ #define USB_OTG_DOEPCTL_MPSIZ USB_OTG_DOEPCTL_MPSIZ_Msk /*!< Maximum packet size */ /*!queued_len += short_packet_size; - + EP_TX_DMA_ADDR(epnum) = (uint32_t)buffer; USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << epnum); EP_TX_LEN(epnum) = short_packet_size; @@ -366,7 +366,7 @@ void dcd_int_handler(uint8_t rhport) { } else if (intflag & USBHS_SETUP_FLAG) { USBHS_Dev_Endp0_Tog = 1; dcd_event_setup_received(0, EP0_DatabufHD, true); - + USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ } else if (intflag & USBHS_DETECT_FLAG) { USBHS_Dev_Endp0_Tog = 1; diff --git a/test/fuzz/dcd_fuzz.cc b/test/fuzz/dcd_fuzz.cc index 6403015dd..06ddddc4a 100644 --- a/test/fuzz/dcd_fuzz.cc +++ b/test/fuzz/dcd_fuzz.cc @@ -185,7 +185,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, /* TODO: implement a fuzzed version of this. bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, - uint16_t total_bytes) {} + uint16_t total_bytes) {} */ // Stall endpoint, any queuing transfer should be removed from endpoint @@ -205,4 +205,4 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { UNUSED(ep_addr); return; } -} \ No newline at end of file +} diff --git a/test/fuzz/device/cdc/CMakeLists.txt b/test/fuzz/device/cdc/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/test/fuzz/device/cdc/CMakeLists.txt +++ b/test/fuzz/device/cdc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/test/fuzz/device/cdc/src/fuzz.cc b/test/fuzz/device/cdc/src/fuzz.cc index d40483ca6..0560e8621 100644 --- a/test/fuzz/device/cdc/src/fuzz.cc +++ b/test/fuzz/device/cdc/src/fuzz.cc @@ -143,7 +143,7 @@ void cdc_task(FuzzedDataProvider *provider) { // TODO: Fuzz interface number (void)tud_cdc_n_write(0, buffer.data(), buffer.size()); } break; - + case kCdcNWriteChar: // TODO: Fuzz interface number (void)tud_cdc_n_write_char(0, provider->ConsumeIntegral()); @@ -171,4 +171,4 @@ case kMaxValue: break; } } -} \ No newline at end of file +} diff --git a/test/fuzz/device/msc/CMakeLists.txt b/test/fuzz/device/msc/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/test/fuzz/device/msc/CMakeLists.txt +++ b/test/fuzz/device/msc/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/test/fuzz/device/msc/src/fuzz.cc b/test/fuzz/device/msc/src/fuzz.cc index 568900452..371d49882 100644 --- a/test/fuzz/device/msc/src/fuzz.cc +++ b/test/fuzz/device/msc/src/fuzz.cc @@ -59,4 +59,3 @@ extern "C" int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) { return 0; } - diff --git a/test/fuzz/device/net/CMakeLists.txt b/test/fuzz/device/net/CMakeLists.txt index fa6e83b7e..8e4db9d29 100644 --- a/test/fuzz/device/net/CMakeLists.txt +++ b/test/fuzz/device/net/CMakeLists.txt @@ -26,4 +26,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/test/fuzz/device/net/src/arch/cc.h b/test/fuzz/device/net/src/arch/cc.h index 56a0cacf7..9f30b91cb 100644 --- a/test/fuzz/device/net/src/arch/cc.h +++ b/test/fuzz/device/net/src/arch/cc.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Adam Dunkels * */ @@ -42,7 +42,7 @@ typedef int sys_prot_t; #if defined (__ICCARM__) #define PACK_STRUCT_BEGIN -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x #define PACK_STRUCT_USE_INCLUDES @@ -50,7 +50,7 @@ typedef int sys_prot_t; #elif defined (__CC_ARM) #define PACK_STRUCT_BEGIN __packed -#define PACK_STRUCT_STRUCT +#define PACK_STRUCT_STRUCT #define PACK_STRUCT_END #define PACK_STRUCT_FIELD(x) x diff --git a/test/fuzz/device/net/src/fuzz.cc b/test/fuzz/device/net/src/fuzz.cc index ea4943665..a6935928a 100644 --- a/test/fuzz/device/net/src/fuzz.cc +++ b/test/fuzz/device/net/src/fuzz.cc @@ -81,7 +81,7 @@ void net_task(FuzzedDataProvider *provider) { assert(provider != NULL); switch (provider->ConsumeEnum()) { - + case kNetworkRecvRenew: tud_network_recv_renew(); break; diff --git a/test/fuzz/device/net/src/lwipopts.h b/test/fuzz/device/net/src/lwipopts.h index a215017c7..336c9243d 100644 --- a/test/fuzz/device/net/src/lwipopts.h +++ b/test/fuzz/device/net/src/lwipopts.h @@ -1,8 +1,8 @@ /* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, @@ -11,21 +11,21 @@ * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. + * derived from this software without specific prior written permission. * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. - * + * * Author: Simon Goldschmidt * */ diff --git a/test/fuzz/dicts/cdc.dict b/test/fuzz/dicts/cdc.dict index 138775cdc..421eb8ed9 100644 --- a/test/fuzz/dicts/cdc.dict +++ b/test/fuzz/dicts/cdc.dict @@ -71,4 +71,3 @@ RNDIS_PACKET_TYPE_FUNCTIONAL="\x00\x00\x40\x00" # NIC driver frames that a Token Ring NIC receives. RNDIS_PACKET_TYPE_MAC_FRAME="\x00\x00\x80\x00" RNDIS_PACKET_TYPE_NO_LOCAL="\x00\x01\x00\x00" - diff --git a/test/fuzz/make.mk b/test/fuzz/make.mk index 934819665..b7b6d6a75 100644 --- a/test/fuzz/make.mk +++ b/test/fuzz/make.mk @@ -114,7 +114,7 @@ CXXFLAGS += \ # conversion is too strict for most mcu driver, may be disable sign/int/arith-conversion # -Wconversion - + # Debugging/Optimization ifeq ($(DEBUG), 1) CFLAGS += -Og @@ -132,4 +132,3 @@ endif ifneq ($(LOGGER),) CMAKE_DEFSYM += -DLOGGER=$(LOGGER) endif - diff --git a/test/fuzz/msc_fuzz.cc b/test/fuzz/msc_fuzz.cc index e906ca971..6e838a682 100644 --- a/test/fuzz/msc_fuzz.cc +++ b/test/fuzz/msc_fuzz.cc @@ -159,4 +159,4 @@ int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, } } -#endif \ No newline at end of file +#endif diff --git a/test/fuzz/net_fuzz.cc b/test/fuzz/net_fuzz.cc index 8467d6d8e..3158e74ef 100644 --- a/test/fuzz/net_fuzz.cc +++ b/test/fuzz/net_fuzz.cc @@ -79,4 +79,4 @@ void tud_network_link_state_cb(bool state) { } } -#endif \ No newline at end of file +#endif diff --git a/test/fuzz/rules.mk b/test/fuzz/rules.mk index d9c2a1a77..825abddc5 100644 --- a/test/fuzz/rules.mk +++ b/test/fuzz/rules.mk @@ -89,7 +89,7 @@ endif # Rules # --------------------------------------- -all: $(BUILD)/$(PROJECT) +all: $(BUILD)/$(PROJECT) OBJ_DIRS = $(sort $(dir $(OBJ))) $(OBJ): | $(OBJ_DIRS) @@ -111,7 +111,7 @@ vpath %.c . $(TOP) $(BUILD)/obj/%.o: %.c @echo CC $(notdir $@) @$(CC) $(CFLAGS) -c -MD -o $@ $< - + # All cpp srcs vpath %.cc . $(TOP) $(BUILD)/obj/%_cxx.o: %.cc @@ -158,4 +158,4 @@ linkermap: $(BUILD)/$(PROJECT) # Print out the value of a make variable. # https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile print-%: - @echo $* = $($*) \ No newline at end of file + @echo $* = $($*) diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index 63684e76a..c757cdcfa 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, hathach (tinyusb.org) diff --git a/test/unit-test/test/device/usbd/test_usbd.c b/test/unit-test/test/device/usbd/test_usbd.c index ad95eb47a..dcded605a 100644 --- a/test/unit-test/test/device/usbd/test_usbd.c +++ b/test/unit-test/test/device/usbd/test_usbd.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/test/unit-test/test/test_fifo.c b/test/unit-test/test/test_fifo.c index 28be6d8fc..3b4deb33e 100644 --- a/test/unit-test/test/test_fifo.c +++ b/test/unit-test/test/test_fifo.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling.rb b/test/unit-test/vendor/ceedling/lib/ceedling.rb index 7f3400236..6c57fb48d 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling.rb @@ -96,4 +96,3 @@ module Ceedling DEFAULT_CEEDLING_CONFIG[:plugins][:load_paths] << gem_dir end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb index 5727bcabc..31abe6d99 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/build_invoker_utils.rb @@ -5,7 +5,7 @@ require 'ceedling/constants' class BuildInvokerUtils constructor :configurator, :streaminator - + ## # Processes exceptions and tries to display a useful message for the user. # @@ -13,27 +13,27 @@ class BuildInvokerUtils # # * _exception_: The exception given by a rescue statement. # * _context_: A symbol representing where in the build the exception - # occurs. + # occurs. # * _test_build_: A bool to signify if the exception occurred while building # from test or source. # def process_exception(exception, context, test_build=true) if (exception.message =~ /Don't know how to build task '(.+)'/i) error_header = "ERROR: Rake could not find file referenced in source" - error_header += " or test" if (test_build) + error_header += " or test" if (test_build) error_header += ": '#{$1}'. Possible stale dependency." - + @streaminator.stderr_puts( error_header ) if (@configurator.project_use_deep_dependencies) - help_message = "Try fixing #include statements or adding missing file. Then run '#{REFRESH_TASK_ROOT}#{context.to_s}' task and try again." + help_message = "Try fixing #include statements or adding missing file. Then run '#{REFRESH_TASK_ROOT}#{context.to_s}' task and try again." @streaminator.stderr_puts( help_message ) end - + raise '' else raise exception end end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb index 519a4aab4..fd7451fa7 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator.rb @@ -2,7 +2,7 @@ class Cacheinator constructor :cacheinator_helper, :file_path_utils, :file_wrapper, :yaml_wrapper - + def cache_test_config(hash) @yaml_wrapper.dump( @file_path_utils.form_test_build_cache_path( INPUT_CONFIGURATION_CACHE_FILE), hash ) end @@ -11,15 +11,15 @@ class Cacheinator @yaml_wrapper.dump( @file_path_utils.form_release_build_cache_path( INPUT_CONFIGURATION_CACHE_FILE ), hash ) end - + def diff_cached_test_file( filepath ) cached_filepath = @file_path_utils.form_test_build_cache_path( filepath ) - + if (@file_wrapper.exist?( cached_filepath ) and (!@file_wrapper.compare( filepath, cached_filepath ))) @file_wrapper.cp(filepath, cached_filepath, {:preserve => false}) return filepath elsif (!@file_wrapper.exist?( cached_filepath )) - @file_wrapper.cp(filepath, cached_filepath, {:preserve => false}) + @file_wrapper.cp(filepath, cached_filepath, {:preserve => false}) return filepath end @@ -43,5 +43,5 @@ class Cacheinator return @cacheinator_helper.diff_cached_config?( cached_filepath, hash ) end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb index 14e8a6ef0..b7fa5863f 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/cacheinator_helper.rb @@ -2,7 +2,7 @@ class CacheinatorHelper constructor :file_wrapper, :yaml_wrapper - + def diff_cached_config?(cached_filepath, hash) return false if ( not @file_wrapper.exist?(cached_filepath) ) return true if (@yaml_wrapper.load(cached_filepath) != hash) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb b/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb index 4a74aa842..82ef96135 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/cmock_builder.rb @@ -1,13 +1,13 @@ require 'cmock' class CmockBuilder - + attr_accessor :cmock - - def setup + + def setup @cmock = nil end - + def manufacture(cmock_config) @cmock = CMock.new(cmock_config) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb index 0ae4d04a8..8dc11aa5a 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator.rb @@ -379,4 +379,3 @@ class Configurator end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb index 75bcd982d..c2e198597 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_plugins.rb @@ -109,7 +109,7 @@ class ConfiguratorPlugins return defaults_with_path end - # gather up and return + # gather up and return def find_plugin_hash_defaults(config, plugin_paths) defaults_hash= [] diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb index c43bb5c12..cba88df3c 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_setup.rb @@ -79,7 +79,7 @@ class ConfiguratorSetup if config[:cmock][:unity_helper] config[:cmock][:unity_helper].each do |path| - validation << @configurator_validator.validate_filepath_simple( path, :cmock, :unity_helper ) + validation << @configurator_validator.validate_filepath_simple( path, :cmock, :unity_helper ) end end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb index fc0210124..fc2950e0b 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/configurator_validator.rb @@ -6,7 +6,7 @@ require 'ceedling/file_path_utils' # for glob handling class methods class ConfiguratorValidator - + constructor :file_wrapper, :stream_wrapper, :system_wrapper # walk into config hash verify existence of data at key depth @@ -16,9 +16,9 @@ class ConfiguratorValidator if (not exist) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Required config file entry #{format_key_sequence(keys, hash[:depth])} does not exist.") + @stream_wrapper.stderr_puts("ERROR: Required config file entry #{format_key_sequence(keys, hash[:depth])} does not exist.") end - + return exist end @@ -33,39 +33,39 @@ class ConfiguratorValidator path_list = [] exist = true - + case list when String then path_list << list when Array then path_list = list end - + path_list.each do |path| base_path = FilePathUtils::extract_path(path) # lop off add/subtract notation & glob specifiers - + if (not @file_wrapper.exist?(base_path)) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config path #{format_key_sequence(keys, hash[:depth])}['#{base_path}'] does not exist on disk.") + @stream_wrapper.stderr_puts("ERROR: Config path #{format_key_sequence(keys, hash[:depth])}['#{base_path}'] does not exist on disk.") exist = false - end + end end - + return exist end - + # simple path verification def validate_filepath_simple(path, *keys) validate_path = path - + if (not @file_wrapper.exist?(validate_path)) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config path '#{validate_path}' associated with #{format_key_sequence(keys, keys.size)} does not exist on disk.") + @stream_wrapper.stderr_puts("ERROR: Config path '#{validate_path}' associated with #{format_key_sequence(keys, keys.size)} does not exist on disk.") return false - end - + end + return true end - + # walk into config hash. verify specified file exists. def validate_filepath(config, *keys) hash = retrieve_value(config, keys) @@ -76,21 +76,21 @@ class ConfiguratorValidator # skip everything if we've got an argument replacement pattern return true if (filepath =~ TOOL_EXECUTOR_ARGUMENT_REPLACEMENT_PATTERN) - + if (not @file_wrapper.exist?(filepath)) # See if we can deal with it internally. - if GENERATED_DIR_PATH.include?(filepath) + if GENERATED_DIR_PATH.include?(filepath) # we already made this directory before let's make it again. FileUtils.mkdir_p File.join(File.dirname(__FILE__), filepath) - @stream_wrapper.stderr_puts("WARNING: Generated filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk. Recreating") - + @stream_wrapper.stderr_puts("WARNING: Generated filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk. Recreating") + else # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk.") return false end - end + end return true end @@ -106,17 +106,17 @@ class ConfiguratorValidator # skip everything if we've got an argument replacement pattern return true if (filepath =~ TOOL_EXECUTOR_ARGUMENT_REPLACEMENT_PATTERN) - + # if there's no path included, verify file exists somewhere in system search paths if (not filepath.include?('/')) exists = false - + @system_wrapper.search_paths.each do |path| if (@file_wrapper.exist?( File.join(path, filepath)) ) exists = true break end - + if (@file_wrapper.exist?( (File.join(path, filepath)).ext( exe_extension ) )) exists = true break @@ -125,25 +125,25 @@ class ConfiguratorValidator break end end - + if (not exists) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist in system search paths.") - return false + @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist in system search paths.") + return false end - + # if there is a path included, check that explicit filepath exists else if (not @file_wrapper.exist?(filepath)) # no verbosity checking since this is lowest level anyhow & verbosity checking depends on configurator - @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk.") + @stream_wrapper.stderr_puts("ERROR: Config filepath #{format_key_sequence(keys, hash[:depth])}['#{filepath}'] does not exist on disk.") return false - end + end end return true end - + def validate_tool_stderr_redirect(config, tools, tool) redirect = config[tools][tool][:stderr_redirect] if (redirect.class == Symbol) @@ -151,17 +151,17 @@ class ConfiguratorValidator if (not StdErrRedirect.constants.map{|constant| constant.to_s}.include?(redirect.to_s.upcase)) error = "ERROR: [:#{tools}][:#{tool}][:stderr_redirect][:#{redirect}] is not a recognized option " + "{#{StdErrRedirect.constants.map{|constant| ':' + constant.to_s.downcase}.join(', ')}}." - @stream_wrapper.stderr_puts(error) - return false + @stream_wrapper.stderr_puts(error) + return false end end - + return true end - + private ######################################### - - + + def retrieve_value(config, keys) value = nil hash = config @@ -178,7 +178,7 @@ class ConfiguratorValidator break end end - + return {:value => value, :depth => depth} end @@ -186,8 +186,8 @@ class ConfiguratorValidator def format_key_sequence(keys, depth) walked_keys = keys.slice(0, depth) formatted_keys = walked_keys.map{|key| "[:#{key.to_s}]"} - + return formatted_keys.join end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb index 8d70b6d28..dab8d736b 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/erb_wrapper.rb @@ -6,4 +6,4 @@ class ErbWrapper f << ERB.new(template, 0, "<>").result(binding) end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb index 53775b7bb..4a1064c52 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder.rb @@ -146,4 +146,3 @@ class FileFinder return @file_finder_helper.find_file_in_collection(file_path, file_list, complain) end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb index a168e5cb5..f2d6a5e91 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_finder_helper.rb @@ -4,11 +4,11 @@ require 'ceedling/constants' # for Verbosity enumeration class FileFinderHelper constructor :streaminator - - + + def find_file_in_collection(file_name, file_list, complain, extra_message="") file_to_find = nil - + file_list.each do |item| base_file = File.basename(item) @@ -22,29 +22,29 @@ class FileFinderHelper blow_up(file_name, "However, a filename having different capitalization was found: '#{item}'.") end end - + end - + if file_to_find.nil? case (complain) - when :error then blow_up(file_name, extra_message) + when :error then blow_up(file_name, extra_message) when :warn then gripe(file_name, extra_message) - #when :ignore then + #when :ignore then end end - + return file_to_find end private - + def blow_up(file_name, extra_message="") error = "ERROR: Found no file '#{file_name}' in search paths." error += ' ' if (extra_message.length > 0) @streaminator.stderr_puts(error + extra_message, Verbosity::ERRORS) raise end - + def gripe(file_name, extra_message="") warning = "WARNING: Found no file '#{file_name}' in search paths." warning += ' ' if (extra_message.length > 0) @@ -52,5 +52,3 @@ class FileFinderHelper end end - - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb index 97e5856fb..245d8f826 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_utils.rb @@ -6,7 +6,7 @@ require 'ceedling/file_path_utils' class FileSystemUtils - + constructor :file_wrapper # build up path list from input of one or more strings or arrays of (+/-) paths & globs @@ -14,7 +14,7 @@ class FileSystemUtils raw = [] # all paths and globs plus = Set.new # all paths to expand and add minus = Set.new # all paths to remove from plus set - + # assemble all globs and simple paths, reforming our glob notation to ruby globs paths.each do |paths_container| case (paths_container) @@ -26,29 +26,29 @@ class FileSystemUtils # iterate through each path and glob raw.each do |path| - + dirs = [] # container for only (expanded) paths - + # if a glob, expand it and slurp up all non-file paths if path.include?('*') # grab base directory only if globs are snug up to final path separator if (path =~ /\/\*+$/) dirs << FilePathUtils.extract_path(path) end - + # grab expanded sub-directory globs expanded = @file_wrapper.directory_listing( FilePathUtils.extract_path_no_aggregation_operators(path) ) expanded.each do |entry| dirs << entry if @file_wrapper.directory?(entry) end - + # else just grab simple path # note: we could just run this through glob expansion but such an # approach doesn't handle a path not yet on disk) else dirs << FilePathUtils.extract_path_no_aggregation_operators(path) end - + # add dirs to the appropriate set based on path aggregation modifier if present FilePathUtils.add_path?(path) ? plus.merge(dirs) : minus.merge(dirs) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb index 807cbd23f..1bb2883ee 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/file_system_wrapper.rb @@ -7,4 +7,4 @@ class FileSystemWrapper end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb index 31d62c46a..175b3c5ac 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/flaginator.rb @@ -29,25 +29,25 @@ class Flaginator def get_flag(hash, file_name) file_key = file_name.to_sym - + # 1. try literals - literals, magic = partition(hash) { |k, v| k.to_s =~ /^\w+$/ } + literals, magic = partition(hash) { |k, v| k.to_s =~ /^\w+$/ } return literals[file_key] if literals.include?(file_key) - + any, regex = partition(magic) { |k, v| (k == :'*') || (k == :'.*') } # glob or regex wild card - + # 2. try regexes find_res = regex.find { |k, v| file_name =~ /^#{k.to_s}$/ } return find_res[1] if find_res - + # 3. try anything find_res = any.find { |k, v| file_name =~ /.*/ } return find_res[1] if find_res - + # 4. well, we've tried return [] end - + def flag_down( operation, context, file ) # create configurator accessor method accessor = ('flags_' + context.to_s).to_sym diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb index 343156092..a6682c275 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/generator_helper.rb @@ -9,7 +9,7 @@ class GeneratorHelper def test_results_error_handler(executable, shell_result) notice = '' error = false - + if (shell_result[:output].nil? or shell_result[:output].strip.empty?) error = true # mirror style of generic tool_executor failure output @@ -24,7 +24,7 @@ class GeneratorHelper "> Produced no final test result counts in $stdout:\n" + "#{shell_result[:output].strip}\n" end - + if (error) # since we told the tool executor to ignore the exit code, handle it explicitly here notice += "> And exited with status: [#{shell_result[:exit_code]}] (count of failed tests).\n" if (shell_result[:exit_code] != nil) @@ -33,8 +33,8 @@ class GeneratorHelper notice += "> This is often a symptom of a bad memory access in source or test code.\n\n" @streaminator.stderr_puts(notice, Verbosity::COMPLAIN) - raise + raise end end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb index 3af2d720a..2cd96478c 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results.rb @@ -77,7 +77,7 @@ class GeneratorTestResults # handle anything preceding filename in line as extra output to be collected stdout = nil stdout_regex = /(.+)#{Regexp.escape(filename)}.+/i - unity_test_time = 0 + unity_test_time = 0 if (line =~ stdout_regex) stdout = $1.clone diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb index 0b518325b..1d193c844 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/generator_test_results_sanity_checker.rb @@ -6,34 +6,34 @@ require 'ceedling/constants' class GeneratorTestResultsSanityChecker constructor :configurator, :streaminator - + def verify(results, unity_exit_code) - + # do no sanity checking if it's disabled return if (@configurator.sanity_checks == TestResultsSanityChecks::NONE) raise "results nil or empty" if results.nil? || results.empty? - ceedling_ignores_count = results[:ignores].size + ceedling_ignores_count = results[:ignores].size ceedling_failures_count = results[:failures].size ceedling_tests_summation = (ceedling_ignores_count + ceedling_failures_count + results[:successes].size) - # Exit code handling is not a sanity check that can always be performed because + # Exit code handling is not a sanity check that can always be performed because # command line simulators may or may not pass through Unity's exit code if (@configurator.sanity_checks >= TestResultsSanityChecks::THOROUGH) # many platforms limit exit codes to a maximum of 255 if ((ceedling_failures_count != unity_exit_code) and (unity_exit_code < 255)) sanity_check_warning(results[:source][:file], "Unity's exit code (#{unity_exit_code}) does not match Ceedling's summation of failed test cases (#{ceedling_failures_count}).") end - + if ((ceedling_failures_count < 255) and (unity_exit_code == 255)) sanity_check_warning(results[:source][:file], "Ceedling's summation of failed test cases (#{ceedling_failures_count}) is less than Unity's exit code (255 or more).") end end - + if (ceedling_ignores_count != results[:counts][:ignored]) sanity_check_warning(results[:source][:file], "Unity's final ignore count (#{results[:counts][:ignored]}) does not match Ceedling's summation of ignored test cases (#{ceedling_ignores_count}).") end - + if (ceedling_failures_count != results[:counts][:failed]) sanity_check_warning(results[:source][:file], "Unity's final fail count (#{results[:counts][:failed]}) does not match Ceedling's summation of failed test cases (#{ceedling_failures_count}).") end @@ -41,14 +41,14 @@ class GeneratorTestResultsSanityChecker if (ceedling_tests_summation != results[:counts][:total]) sanity_check_warning(results[:source][:file], "Unity's final test count (#{results[:counts][:total]}) does not match Ceedling's summation of all test cases (#{ceedling_tests_summation}).") end - + end private - + def sanity_check_warning(file, message) unless defined?(CEEDLING_IGNORE_SANITY_CHECK) - notice = "\n" + + notice = "\n" + "ERROR: Internal sanity check for test fixture '#{file.ext(@configurator.extension_executable)}' finds that #{message}\n" + " Possible causes:\n" + " 1. Your test + source dereferenced a null pointer.\n" + @@ -56,7 +56,7 @@ class GeneratorTestResultsSanityChecker " 3. Your test + source committed a memory access violation.\n" + " 4. Your test fixture produced an exit code of 0 despite execution ending prematurely.\n" + " Sanity check failures of test results are usually a symptom of interrupted test execution.\n\n" - + @streaminator.stderr_puts( notice ) raise end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb index 92276e1df..38147b322 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/loginator.rb @@ -11,7 +11,7 @@ class Loginator config_files.concat( @project_config_manager.options_files ) config_files.compact! config_files.map! { |file| file.ext('') } - + log_name = config_files.join( '_' ) @project_log_filepath = File.join( @configurator.project_log_path, log_name.ext('.log') ) @@ -20,12 +20,12 @@ class Loginator def log(string, heading=nil) return if (not @configurator.project_logging) - + output = "\n[#{@system_wrapper.time_now}]" output += " :: #{heading}" if (not heading.nil?) output += "\n#{string.strip}\n" @file_wrapper.write(@project_log_filepath, output, 'a') end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb b/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb index c3d7496d2..9ad894ea0 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/makefile.rb @@ -1,6 +1,6 @@ # modified version of Rake's provided make-style dependency loader -# customizations: +# customizations: # (1) handles windows drives in paths -- colons don't confuse task demarcation # (2) handles spaces in directory paths @@ -29,7 +29,7 @@ module Rake file_tasks, args = line.split(/:\s/) return if args.nil? - + # split at non-escaped space boundary between files (i.e. escaped spaces in paths are left alone) dependents = args.split(/\b\s+/) # replace escaped spaces and clean up any extra whitespace diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml b/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml index 43bbc066c..d73987f7c 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml +++ b/test/unit-test/vendor/ceedling/lib/ceedling/objects.yml @@ -223,7 +223,7 @@ dependinator: - configurator - project_config_manager - test_includes_extractor - - file_path_utils + - file_path_utils - rake_wrapper - file_wrapper diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb b/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb index 98198a2ce..250b5ad30 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/par_map.rb @@ -16,4 +16,3 @@ def par_map(n, things, &block) end threads.each { |t| t.join } end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb index f20b3a3b2..835c08c52 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin.rb @@ -5,7 +5,7 @@ class String def left_margin(margin=0) non_whitespace_column = 0 new_lines = [] - + # find first line with non-whitespace and count left columns of whitespace self.each_line do |line| if (line =~ /^\s*\S/) @@ -13,7 +13,7 @@ class String break end end - + # iterate through each line, chopping off leftmost whitespace columns and add back the desired whitespace margin self.each_line do |line| columns = [] @@ -25,7 +25,7 @@ class String new_lines << "\n" end end - + return new_lines.join end end @@ -74,7 +74,7 @@ class Plugin # whole shebang (any use of Ceedling) def pre_build; end def post_build; end - + def summary; end end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb index 1269141f1..a010e1d0f 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_builder.rb @@ -23,7 +23,7 @@ class PluginBuilder end private - + def camelize(underscored_name) return underscored_name.gsub(/(_|^)([a-z0-9])/) {$2.upcase} end @@ -50,4 +50,4 @@ class PluginBuilder end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb index 8d83727ba..afc54494b 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator.rb @@ -2,46 +2,46 @@ require 'ceedling/constants' require 'ceedling/defaults' class PluginReportinator - + constructor :plugin_reportinator_helper, :plugin_manager, :reportinator def setup @test_results_template = nil end - - + + def set_system_objects(system_objects) @plugin_reportinator_helper.ceedling = system_objects end - - + + def fetch_results(results_path, test, options={:boom => false}) return @plugin_reportinator_helper.fetch_results( File.join(results_path, test), options ) end - + def generate_banner(message) return @reportinator.generate_banner(message) end - + def assemble_test_results(results_list, options={:boom => false}) aggregated_results = get_results_structure - - results_list.each do |result_path| + + results_list.each do |result_path| results = @plugin_reportinator_helper.fetch_results( result_path, options ) @plugin_reportinator_helper.process_results(aggregated_results, results) end return aggregated_results end - - + + def register_test_results_template(template) @test_results_template = template if (@test_results_template.nil?) end - - + + def run_test_results_report(hash, verbosity=Verbosity::NORMAL, &block) run_report( $stdout, ((@test_results_template.nil?) ? DEFAULT_TESTS_RESULTS_REPORT_TEMPLATE : @test_results_template), @@ -49,19 +49,19 @@ class PluginReportinator verbosity, &block ) end - - + + def run_report(stream, template, hash=nil, verbosity=Verbosity::NORMAL) failure = nil failure = yield() if block_given? - + @plugin_manager.register_build_failure( failure ) - + @plugin_reportinator_helper.run_report( stream, template, hash, verbosity ) end - + private ############################### - + def get_results_structure return { :successes => [], @@ -72,5 +72,5 @@ class PluginReportinator :time => 0.0 } end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb index 322a530b5..783158797 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/plugin_reportinator_helper.rb @@ -4,11 +4,11 @@ require 'rake' # for ext() require 'ceedling/constants' class PluginReportinatorHelper - + attr_writer :ceedling - + constructor :configurator, :streaminator, :yaml_wrapper, :file_wrapper - + def fetch_results(results_path, options) pass_path = File.join(results_path.ext( @configurator.extension_testpass )) fail_path = File.join(results_path.ext( @configurator.extension_testfail )) @@ -23,7 +23,7 @@ class PluginReportinatorHelper raise end end - + return {} end @@ -47,5 +47,5 @@ class PluginReportinatorHelper output = ERB.new(template, 0, "%<>") @streaminator.stream_puts(stream, output.result(binding()), verbosity) end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb b/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb index 8b89c0b3a..916d31332 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/preprocessinator_includes_handler.rb @@ -94,7 +94,7 @@ class PreprocessinatorIncludesHandler target_file = make_rule.split[0].gsub(':', '').gsub('\\','/') base = File.basename(target_file, File.extname(target_file)) make_rule_dependencies = make_rule.gsub(/.*\b#{Regexp.escape(base)}\S*/, '').gsub(/\\$/, '') - + # Extract the headers dependencies from the make rule hdr_ext = @configurator.extension_header headers_dependencies = make_rule_dependencies.split.find_all {|path| path.end_with?(hdr_ext) }.uniq diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb b/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb index ed7a73b8c..b1d455127 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/project_config_manager.rb @@ -20,7 +20,7 @@ class ProjectConfigManager def merge_options(config_hash, option_filepath) @options_files << File.basename( option_filepath ) config_hash.deep_merge!( @yaml_wrapper.load( option_filepath ) ) - end + end def filter_internal_sources(sources) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb index 3f667c852..b13749738 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rake_utils.rb @@ -1,6 +1,6 @@ class RakeUtils - + constructor :rake_wrapper def task_invoked?(task_regex) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb index 0f583d06d..fcb5286b9 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/reportinator.rb @@ -14,8 +14,8 @@ class Reportinator # ==== Examples # # rp = Reportinator.new - # rp.generate_banner("Hello world!") => "------------\nHello world!\n------------\n" - # rp.generate_banner("Hello world!", 3) => "---\nHello world!\n---\n" + # rp.generate_banner("Hello world!") => "------------\nHello world!\n------------\n" + # rp.generate_banner("Hello world!", 3) => "---\nHello world!\n---\n" # # def generate_banner(message, width=nil) diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake index 70ddcbc2e..51485d3a8 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_cmock.rake @@ -3,7 +3,7 @@ rule(/#{CMOCK_MOCK_PREFIX}[^\/\\]+#{'\\'+EXTENSION_SOURCE}$/ => [ proc do |task_name| @ceedling[:file_finder].find_header_input_for_mock_file(task_name) - end + end ]) do |mock| @ceedling[:generator].generate_mock(TEST_SYM, mock.source) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake index c29111272..936961ce8 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_preprocess.rake @@ -6,7 +6,7 @@ rule(/#{PROJECT_TEST_PREPROCESS_FILES_PATH}\/.+/ => [ proc do |task_name| @ceedling[:file_finder].find_test_or_source_or_header_file(task_name) - end + end ]) do |file| if (not @ceedling[:configurator].project_use_deep_dependencies) raise 'ERROR: Ceedling preprocessing rule invoked though neccessary auxiliary dependency support not enabled.' @@ -19,8 +19,7 @@ end rule(/#{PROJECT_TEST_PREPROCESS_INCLUDES_PATH}\/.+/ => [ proc do |task_name| @ceedling[:file_finder].find_test_or_source_or_header_file(task_name) - end + end ]) do |file| @ceedling[:generator].generate_shallow_includes_list(TEST_SYM, file.source) end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake index 4a583bd6c..47eec858f 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release.rake @@ -96,4 +96,3 @@ namespace RELEASE_SYM do end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake index 9550783cc..bf944de25 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_release_deep_dependencies.rake @@ -3,7 +3,7 @@ rule(/#{PROJECT_RELEASE_DEPENDENCIES_PATH}\/#{'.+\\'+EXTENSION_DEPENDENCIES}$/ => [ proc do |task_name| @ceedling[:file_finder].find_compilation_input_file(task_name, :error, true) - end + end ]) do |dep| @ceedling[:generator].generate_dependencies_file( TOOLS_RELEASE_DEPENDENCIES_GENERATOR, @@ -12,4 +12,3 @@ rule(/#{PROJECT_RELEASE_DEPENDENCIES_PATH}\/#{'.+\\'+EXTENSION_DEPENDENCIES}$/ = @ceedling[:file_path_utils].form_release_build_c_object_filepath(dep.source), dep.name) end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake index 61e15e2cc..3ab80f3a9 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests.rake @@ -70,4 +70,3 @@ namespace TEST_SYM do @ceedling[:test_invoker].setup_and_invoke([test.source]) end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake index 7175ee3f2..a8dfd296e 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/rules_tests_deep_dependencies.rake @@ -12,4 +12,3 @@ rule(/#{PROJECT_TEST_DEPENDENCIES_PATH}\/#{'.+\\'+EXTENSION_DEPENDENCIES}$/ => [ @ceedling[:file_path_utils].form_test_build_c_object_filepath(dep.source), dep.name) end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb index ea78fd97e..cf9922f07 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/setupinator.rb @@ -18,7 +18,7 @@ class Setupinator @config_hash = config_hash # load up all the constants and accessors our rake files, objects, & external scripts will need; - # note: configurator modifies the cmock section of the hash with a couple defaults to tie + # note: configurator modifies the cmock section of the hash with a couple defaults to tie # project together - the modified hash is used to build cmock object @ceedling[:configurator].populate_defaults( config_hash ) @ceedling[:configurator].populate_unity_defaults( config_hash ) @@ -31,16 +31,16 @@ class Setupinator @ceedling[:configurator].standardize_paths( config_hash ) @ceedling[:configurator].validate( config_hash ) @ceedling[:configurator].build( config_hash, :environment ) - + @ceedling[:configurator].insert_rake_plugins( @ceedling[:configurator].rake_plugins ) @ceedling[:configurator].tools_supplement_arguments( config_hash ) - + # merge in any environment variables plugins specify, after the main build @ceedling[:plugin_manager].load_plugin_scripts( @ceedling[:configurator].script_plugins, @ceedling ) do |env| @ceedling[:configurator].eval_environment_variables( env ) @ceedling[:configurator].build_supplement( config_hash, env ) end - + @ceedling[:plugin_reportinator].set_system_objects( @ceedling ) @ceedling[:file_finder].prepare_search_sources @ceedling[:loginator].setup_log_filepath diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb index 7e160527f..2cee58d3e 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/stream_wrapper.rb @@ -16,7 +16,7 @@ class StreamWrapper def stdout_flush $stdout.flush end - + def stderr_puts(string) $stderr.puts(string) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb index b8dcd070f..e30440c7d 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator.rb @@ -12,7 +12,7 @@ class Streaminator @stream_wrapper.stdout_puts(string) @stream_wrapper.stdout_flush end - + # write to log as though Verbosity::OBNOXIOUS @loginator.log( string, @streaminator_helper.extract_name($stdout) ) end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb index 9fb5cc0b7..cbaef7c92 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/streaminator_helper.rb @@ -8,7 +8,7 @@ class StreaminatorHelper when 2 then '#' else stream.inspect end - + return name end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb b/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb index 477aba4f1..81bb7bc54 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/system_utils.rb @@ -13,7 +13,7 @@ class SystemUtils constructor :system_wrapper ## - # Sets up the class. + # Sets up the class. def setup @tcsh_shell = nil end @@ -23,7 +23,7 @@ class SystemUtils def tcsh_shell? # once run a single time, return state determined at that execution return @tcsh_shell if not @tcsh_shell.nil? - + result = @system_wrapper.shell_backticks('echo $version') if ((result[:exit_code] == 0) and (result[:output].strip =~ /^tcsh/)) @@ -31,7 +31,7 @@ class SystemUtils else @tcsh_shell = false end - + return @tcsh_shell end end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb b/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb index 7bfabbb12..35f92ae03 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/task_invoker.rb @@ -11,7 +11,7 @@ class TaskInvoker @release_regexs = [/^#{RELEASE_ROOT_NAME}(:|$)/] @first_run = true end - + def add_test_task_regex(regex) @test_regexs << regex end @@ -19,26 +19,26 @@ class TaskInvoker def add_release_task_regex(regex) @release_regexs << regex end - + def test_invoked? invoked = false - + @test_regexs.each do |regex| invoked = true if (@rake_utils.task_invoked?(regex)) break if invoked end - + return invoked end - + def release_invoked? invoked = false - + @release_regexs.each do |regex| invoked = true if (@rake_utils.task_invoked?(regex)) break if invoked end - + return invoked end @@ -60,7 +60,7 @@ class TaskInvoker @rake_wrapper[mock].invoke } end - + def invoke_test_runner(runner) @dependinator.enhance_runner_dependencies( runner ) reset_rake_task_for_changed_defines( runner ) @@ -112,11 +112,11 @@ class TaskInvoker @rake_wrapper[file].invoke end end - + def invoke_release_objects(objects) par_map(PROJECT_COMPILE_THREADS, objects) do |object| @rake_wrapper[object].invoke end end - + end diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake index a35cde75e..67a3b503a 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_base.rake @@ -113,4 +113,3 @@ task :summary do puts "\nNOTE: Summaries may be out of date with project sources.\n\n" end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake index 7b950ca0b..8263955fa 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_filesystem.rake @@ -109,5 +109,3 @@ namespace :files do end end - - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake index b313b2f53..9d3a59c53 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_release.rake @@ -5,8 +5,8 @@ require 'ceedling/file_path_utils' desc "Build release target." task RELEASE_SYM => [:directories] do header = "Release build '#{File.basename(PROJECT_RELEASE_BUILD_TARGET)}'" - @ceedling[:streaminator].stdout_puts("\n\n#{header}\n#{'-' * header.length}") - + @ceedling[:streaminator].stdout_puts("\n\n#{header}\n#{'-' * header.length}") + begin @ceedling[:plugin_manager].pre_release @@ -15,16 +15,15 @@ task RELEASE_SYM => [:directories] do @ceedling[:project_config_manager].process_release_config_change core_objects.concat( @ceedling[:release_invoker].setup_and_invoke_c_objects( COLLECTION_ALL_SOURCE ) ) - + # if assembler use isn't enabled, COLLECTION_ALL_ASSEMBLY is empty array & nothing happens core_objects.concat( @ceedling[:release_invoker].setup_and_invoke_asm_objects( COLLECTION_ALL_ASSEMBLY ) ) - + # if we're using libraries, we need to add those to our collection as well library_objects = (defined? LIBRARIES_RELEASE && !LIBRARIES_RELEASE.empty?) ? LIBRARIES_RELEASE.flatten.compact : [] file( PROJECT_RELEASE_BUILD_TARGET => (core_objects + extra_objects + library_objects) ) Rake::Task[PROJECT_RELEASE_BUILD_TARGET].invoke ensure - @ceedling[:plugin_manager].post_release + @ceedling[:plugin_manager].post_release end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake index 6c51ebcc9..5c1006b36 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake +++ b/test/unit-test/vendor/ceedling/lib/ceedling/tasks_tests.rake @@ -59,4 +59,3 @@ namespace TEST_SYM do end end - diff --git a/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb b/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb index 403d93e3e..a48edf9f9 100644 --- a/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb +++ b/test/unit-test/vendor/ceedling/lib/ceedling/test_invoker_helper.rb @@ -19,14 +19,14 @@ class TestInvokerHelper yield( dependencies_list ) if block_given? end - + def extract_sources(test) sources = [] includes = @test_includes_extractor.lookup_includes_list(test) - + includes.each { |include| sources << @file_finder.find_compilation_input_file(include, :ignore) } - + return sources.compact end - + end diff --git a/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb b/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb index 6a6d01ab2..cbc5e3e38 100644 --- a/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb +++ b/test/unit-test/vendor/ceedling/plugins/beep/lib/beep.rb @@ -37,4 +37,3 @@ class Beep < Plugin end end end - diff --git a/test/unit-test/vendor/ceedling/plugins/bullseye/README.md b/test/unit-test/vendor/ceedling/plugins/bullseye/README.md index ab0b53b45..aad449204 100644 --- a/test/unit-test/vendor/ceedling/plugins/bullseye/README.md +++ b/test/unit-test/vendor/ceedling/plugins/bullseye/README.md @@ -5,7 +5,7 @@ ceedling-bullseye Plugin for integrating Bullseye code coverage tool into Ceedling projects. This plugin requires a working license to Bullseye code coverage tools. The tools -must be within the path or the path should be added to the environment in the +must be within the path or the path should be added to the environment in the `project.yml file`. ## Configuration diff --git a/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb b/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb index 504f85583..e1ef9874b 100644 --- a/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb +++ b/test/unit-test/vendor/ceedling/plugins/bullseye/assets/template.erb @@ -12,4 +12,3 @@ BRANCHES: <%=sprintf(format_string, hash[:coverage][:branches])%>% % else BRANCHES: none % end - diff --git a/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb b/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb index ffa444ac7..3e7622006 100644 --- a/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb +++ b/test/unit-test/vendor/ceedling/plugins/bullseye/lib/bullseye.rb @@ -38,7 +38,7 @@ class Bullseye < Plugin @ceedling[:plugin_manager].pre_compile_execute(arg_hash) @ceedling[:streaminator].stdout_puts("Compiling #{File.basename(source)} with coverage...") - compile_command = + compile_command = @ceedling[:tool_executor].build_command_line( TOOLS_BULLSEYE_COMPILER, @ceedling[:flaginator].flag_down( OPERATION_COMPILE_SYM, BULLSEYE_SYM, source ), @@ -48,14 +48,14 @@ class Bullseye < Plugin coverage_command = @ceedling[:tool_executor].build_command_line(TOOLS_BULLSEYE_INSTRUMENTATION, [], compile_command[:line] ) shell_result = @ceedling[:tool_executor].exec( coverage_command[:line], coverage_command[:options] ) - + arg_hash[:shell_result] = shell_result @ceedling[:plugin_manager].post_compile_execute(arg_hash) end def post_test_fixture_execute(arg_hash) result_file = arg_hash[:result_file] - + if ((result_file =~ /#{BULLSEYE_RESULTS_PATH}/) and (not @result_list.include?(result_file))) @result_list << arg_hash[:result_file] end @@ -70,13 +70,13 @@ class Bullseye < Plugin :header => BULLSEYE_ROOT_NAME.upcase, :results => results } - + @ceedling[:plugin_reportinator].run_test_results_report(hash) do message = '' message = 'Unit test failures.' if (results[:counts][:failed] > 0) message end - + # coverage results return if (verify_coverage_file() == false) if (@ceedling[:task_invoker].invoked?(/^#{BULLSEYE_TASK_ROOT}(all|delta)/)) @@ -100,13 +100,13 @@ class Bullseye < Plugin } @ceedling[:plugin_reportinator].run_test_results_report(hash) - + # coverage results command = @ceedling[:tool_executor].build_command_line(TOOLS_BULLSEYE_REPORT_COVSRC) shell_result = @ceedling[:tool_executor].exec(command[:line], command[:options]) report_coverage_results_all(shell_result[:output]) end - + def enableBullseye(enable) if BULLSEYE_AUTO_LICENSE if (enable) @@ -117,14 +117,14 @@ class Bullseye < Plugin @ceedling[:streaminator].stdout_puts("Reverting Bullseye to previous state") end - args.each do |arg| + args.each do |arg| command = @ceedling[:tool_executor].build_command_line(TOOLS_BULLSEYE_BUILD_ENABLE_DISABLE, [], arg) shell_result = @ceedling[:tool_executor].exec(command[:line], command[:options]) end end end - + private ################################### def report_coverage_results_all(coverage) @@ -139,7 +139,7 @@ class Bullseye < Plugin if (coverage =~ /^Total.*?=\s+([0-9]+)\%/) results[:coverage][:functions] = $1.to_i end - + if (coverage =~ /^Total.*=\s+([0-9]+)\%\s*$/) results[:coverage][:branches] = $1.to_i end @@ -177,10 +177,10 @@ class Bullseye < Plugin banner = @ceedling[:plugin_reportinator].generate_banner( "#{BULLSEYE_ROOT_NAME.upcase}: CODE COVERAGE SUMMARY" ) @ceedling[:streaminator].stdout_puts "\n" + banner + "\nNo coverage file.\n\n" end - + return exist end - + end @@ -188,7 +188,7 @@ end END { # cache our input configurations to use in comparison upon next execution if (@ceedling[:task_invoker].invoked?(/^#{BULLSEYE_TASK_ROOT}/)) - @ceedling[:cacheinator].cache_test_config( @ceedling[:setupinator].config_hash ) + @ceedling[:cacheinator].cache_test_config( @ceedling[:setupinator].config_hash ) @ceedling[BULLSEYE_SYM].enableBullseye(false) end } diff --git a/test/unit-test/vendor/ceedling/plugins/colour_report/README.md b/test/unit-test/vendor/ceedling/plugins/colour_report/README.md index 4e0fcd45e..5f4ff77b1 100644 --- a/test/unit-test/vendor/ceedling/plugins/colour_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/colour_report/README.md @@ -3,7 +3,7 @@ ceedling-colour-report ## Overview -The colour_report replaces the normal ceedling "pretty" output with +The colour_report replaces the normal ceedling "pretty" output with a colorized variant, in order to make the results easier to read from a standard command line. This is very useful on developer machines, but can occasionally cause problems with parsing on CI servers. diff --git a/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb b/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb index 4bf8b5312..67e94f935 100644 --- a/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb +++ b/test/unit-test/vendor/ceedling/plugins/command_hooks/lib/command_hooks.rb @@ -89,4 +89,3 @@ class CommandHooks < Plugin end end end - diff --git a/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md b/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md index ea80b7397..7e3846e56 100644 --- a/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md +++ b/test/unit-test/vendor/ceedling/plugins/compile_commands_json/README.md @@ -9,7 +9,7 @@ In June of 2016, Microsoft with Red Hat and Codenvy got together to create a sta For C and C++ projects, many people use the `clangd` backend. So that it can do things like "go to definition", `clangd` needs to know how to build the project so that it can figure out all the pieces to the puzzle. There are manual tools such as `bear` which can be run with `gcc` or `clang` to extract this information it has a big limitation in that if run with `ceedling release` you won't get any auto completion for Unity and you'll also get error messages reported by your IDE because of what it perceives as missing headers. If you do the same with `ceedling test` now you get Unity but you might miss things that are only seen in the release build. -This plugin resolves that issue. As it is run by Ceedling, it has access to all the build information it needs to create the perfect `compile_commands.json`. Once enabled, this plugin will generate that file and place it in `./build/artifacts/compile_commands.json`. `clangd` will search your project for this file, but it is easier to symlink it into the root directory (for example `ln -s ./build/artifacts/compile_commands.json`. +This plugin resolves that issue. As it is run by Ceedling, it has access to all the build information it needs to create the perfect `compile_commands.json`. Once enabled, this plugin will generate that file and place it in `./build/artifacts/compile_commands.json`. `clangd` will search your project for this file, but it is easier to symlink it into the root directory (for example `ln -s ./build/artifacts/compile_commands.json`. For more information on LSP and to find out if your editor supports it, check out https://langserver.org/ diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile index bc5594110..2fd9f859f 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/Rakefile @@ -16,4 +16,4 @@ task :integration_test do end end -task :default => [:spec, :integration_test] \ No newline at end of file +task :default => [:spec, :integration_test] diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml index 6bda22291..00e395d0c 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/project.yml @@ -28,7 +28,7 @@ :source: - src/** :support: - + :defines: # in order to add common defines: # 1) remove the trailing [] from the :common: section diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c index 2f03449b0..797d46878 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/examples/fff_example/src/display.c @@ -4,4 +4,4 @@ void display_turnOffStatusLed(void) { printf("Display: Status LED off"); -} \ No newline at end of file +} diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb index 9dc03a653..d439a8d7f 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/lib/fff_mock_generator.rb @@ -90,7 +90,7 @@ class FffMockGenerator # In the init function, reset the FFF globals. These are used for things # like the call history. output.puts " FFF_RESET_HISTORY();" - + # Also, reset all of the fakes. if parsed_header[:functions] parsed_header[:functions].each do |function| diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb index e6ac11dd0..09d317551 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_header_generator_spec.rb @@ -254,7 +254,7 @@ describe "FffMockGenerator.create_mock_header" do ) end end - + context "when there is a function that returns a const int" do let(:mock_header){ parsed_header = {} diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb index 364f8521e..7b7f04f58 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/fff_mock_source_generator_spec.rb @@ -146,4 +146,4 @@ describe "FffMockGenerator.create_mock_source" do ) end end -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb index cda278440..3b6fa7120 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/spec/header_generator.rb @@ -48,4 +48,4 @@ def create_cmock_style_parsed_header(functions, typedefs = nil) end end parsed_header -end \ No newline at end of file +end diff --git a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h index de3db44aa..970ecbb35 100644 --- a/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h +++ b/test/unit-test/vendor/ceedling/plugins/fake_function_framework/src/fff_unity_helper.h @@ -30,4 +30,4 @@ fff.call_history[order_], \ "Function " #function_ " not called in order " #order_ ) -#endif \ No newline at end of file +#endif diff --git a/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb b/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb index 5e5a1742b..266750497 100644 --- a/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb +++ b/test/unit-test/vendor/ceedling/plugins/gcov/assets/template.erb @@ -12,4 +12,3 @@ BRANCHES: <%=sprintf(format_string, hash[:coverage][:branches])%>% % else BRANCHES: none % end - diff --git a/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb b/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb index 92617fba5..10a0a6c5c 100644 --- a/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb +++ b/test/unit-test/vendor/ceedling/plugins/gcov/lib/reportinator_helper.rb @@ -5,7 +5,7 @@ class ReportinatorHelper def print_shell_result(shell_result) if !(shell_result.nil?) puts "Done in %.3f seconds." % shell_result[:time] - + if !(shell_result[:output].nil?) && (shell_result[:output].length > 0) puts shell_result[:output] end diff --git a/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md index 8e5a1e571..b383492e2 100644 --- a/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/json_tests_report/README.md @@ -3,8 +3,8 @@ json_tests_report ## Overview -The json_tests_report plugin creates a JSON file of test results, which is -handy for Continuous Integration build servers or as input into other +The json_tests_report plugin creates a JSON file of test results, which is +handy for Continuous Integration build servers or as input into other reporting tools. The JSON file is output to the appropriate `/artifacts/` directory (e.g. `artifacts/test/` for test tasks, `artifacts/gcov/` for gcov, or `artifacts/bullseye/` for bullseye runs). diff --git a/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb b/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb index e7023db7b..f09339ee2 100644 --- a/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb +++ b/test/unit-test/vendor/ceedling/plugins/json_tests_report/lib/json_tests_report.rb @@ -33,7 +33,7 @@ class JsonTestsReport < Plugin "IgnoredTests" => write_tests(results[:ignores]), "Summary" => write_statistics(results[:counts]) } - + f << JSON.pretty_generate(json) end end @@ -62,7 +62,7 @@ class JsonTestsReport < Plugin results.each do |result| result[:collection].each do |item| @test_counter += 1 - retval << { + retval << { "file" => File.join(result[:source][:path], result[:source][:file]), "test" => item[:test] } diff --git a/test/unit-test/vendor/ceedling/plugins/module_generator/README.md b/test/unit-test/vendor/ceedling/plugins/module_generator/README.md index a3c2c7ad9..61cf45bd6 100644 --- a/test/unit-test/vendor/ceedling/plugins/module_generator/README.md +++ b/test/unit-test/vendor/ceedling/plugins/module_generator/README.md @@ -96,7 +96,7 @@ put that corporate copyright notice (or maybe a copyleft notice, if that's your ### Test Defines You can specify the "#ifdef TEST" at the top of the test files with a custom define. -This example will put a "#ifdef CEEDLING_TEST" at the top of the test files. +This example will put a "#ifdef CEEDLING_TEST" at the top of the test files. ``` :module_generator: @@ -115,5 +115,3 @@ Your options are as follows: - `:camel` - camelFilesAreSimilarButStartLow - `:snake` - snake_case_is_all_lower_and_uses_underscores - `:caps` - CAPS_FEELS_LIKE_YOU_ARE_SCREAMING - - diff --git a/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml b/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml index cdb2da2eb..b90afd0ff 100644 --- a/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml +++ b/test/unit-test/vendor/ceedling/plugins/module_generator/config/module_generator.yml @@ -1,4 +1,4 @@ :module_generator: :project_root: ./ :source_root: src/ - :test_root: test/ \ No newline at end of file + :test_root: test/ diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md index 9ab60847e..e95106ed1 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/stdout_gtestlike_tests_report/README.md @@ -3,8 +3,8 @@ ceedling-stdout-gtestlike-tests-report ## Overview -The stdout_gtestlike_tests_report replaces the normal ceedling "pretty" output with -a variant that resembles the output of gtest. This is most helpful when trying to +The stdout_gtestlike_tests_report replaces the normal ceedling "pretty" output with +a variant that resembles the output of gtest. This is most helpful when trying to integrate into an IDE or CI that is meant to work with google test. ## Setup diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md index ed6c65582..da04d1c14 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/stdout_ide_tests_report/README.md @@ -3,7 +3,7 @@ ceedling-stdout-ide-tests-report ## Overview -The stdout_ide_tests_report replaces the normal ceedling "pretty" output with +The stdout_ide_tests_report replaces the normal ceedling "pretty" output with a simplified variant intended to be easily parseable. ## Setup diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md index 7e1be2382..358aa93ab 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/README.md @@ -5,7 +5,7 @@ ceedling-pretty-tests-report The stdout_pretty_tests_report is the default output of ceedling. Instead of showing most of the raw output of CMock, Ceedling, etc., it shows a simplified -view. It also creates a nice summary at the end of execution which groups the +view. It also creates a nice summary at the end of execution which groups the results into ignored and failed tests. ## Setup diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb index 52b29f7f0..1c025bf1b 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb +++ b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/assets/template.erb @@ -56,4 +56,3 @@ IGNORED: <%=sprintf(format_string, ignored)%> No tests executed. % end - diff --git a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb index 018388fc1..fd9589183 100644 --- a/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb +++ b/test/unit-test/vendor/ceedling/plugins/stdout_pretty_tests_report/lib/stdout_pretty_tests_report.rb @@ -2,20 +2,20 @@ require 'ceedling/plugin' require 'ceedling/defaults' class StdoutPrettyTestsReport < Plugin - + def setup @result_list = [] @plugin_root = File.expand_path(File.join(File.dirname(__FILE__), '..')) template = @ceedling[:file_wrapper].read(File.join(@plugin_root, 'assets/template.erb')) @ceedling[:plugin_reportinator].register_test_results_template( template ) end - + def post_test_fixture_execute(arg_hash) return if not (arg_hash[:context] == TEST_SYM) - + @result_list << arg_hash[:result_file] end - + def post_build return if not (@ceedling[:task_invoker].test_invoked?) diff --git a/test/unit-test/vendor/ceedling/plugins/subprojects/README.md b/test/unit-test/vendor/ceedling/plugins/subprojects/README.md index e51a4e60e..ef4caa57b 100644 --- a/test/unit-test/vendor/ceedling/plugins/subprojects/README.md +++ b/test/unit-test/vendor/ceedling/plugins/subprojects/README.md @@ -1,9 +1,9 @@ ceedling-subprojects ==================== -Plugin for supporting subprojects that are built as static libraries. It continues to support -dependency tracking, without getting confused between your main project files and your -subproject files. It accepts different compiler flags and linker flags, allowing you to +Plugin for supporting subprojects that are built as static libraries. It continues to support +dependency tracking, without getting confused between your main project files and your +subproject files. It accepts different compiler flags and linker flags, allowing you to optimize for your situation. First, you're going to want to add the extension to your list of known extensions: @@ -13,12 +13,12 @@ First, you're going to want to add the extension to your list of known extension :subprojects: '.a' ``` -Define a new section called :subprojects. There, you can list as many subprojects -as you may need under the :paths key. For each, you specify a unique place to build +Define a new section called :subprojects. There, you can list as many subprojects +as you may need under the :paths key. For each, you specify a unique place to build and a unique name. ``` -:subprojects: +:subprojects: :paths: - :name: libprojectA :source: @@ -27,7 +27,7 @@ and a unique name. :include: - ./subprojectA/include/dir :build_root: ./subprojectA/build/dir - :defines: + :defines: - DEFINE_JUST_FOR_THIS_FILE - AND_ANOTHER - :name: libprojectB diff --git a/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake b/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake index 0025c3ecd..f80c812f3 100644 --- a/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake +++ b/test/unit-test/vendor/ceedling/plugins/subprojects/subprojects.rake @@ -73,6 +73,5 @@ SUBPROJECTS_PATHS.each do |subproj| task :directories => subproj_directories.clone # Finally, add the static library to our RELEASE build dependency list - task RELEASE_SYM => ["#{subproj_build_root}/#{subproj_name}#{EXTENSION_SUBPROJECTS}"] + task RELEASE_SYM => ["#{subproj_build_root}/#{subproj_name}#{EXTENSION_SUBPROJECTS}"] end - diff --git a/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md b/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md index 9fcda7d5b..2467ebe99 100644 --- a/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md +++ b/test/unit-test/vendor/ceedling/plugins/teamcity_tests_report/README.md @@ -3,7 +3,7 @@ ceedling-teamcity-tests-report ## Overview -The teamcity_tests_report replaces the normal ceedling "pretty" output with +The teamcity_tests_report replaces the normal ceedling "pretty" output with a version that has results tagged to be consumed with the teamcity CI server. ## Setup diff --git a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c index fdff8f475..24b3b09e8 100644 --- a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c +++ b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/CException.c @@ -43,4 +43,3 @@ void Throw(CEXCEPTION_T ExceptionID) } <- finish off that local scope we created to have our own variables if (CExceptionFrames[CEXCEPTION_GET_ID].Exception != CEXCEPTION_NONE) <- start the actual 'catch' processing if we have an exception id saved away */ - diff --git a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build index 2770122af..9694e51c7 100644 --- a/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build +++ b/test/unit-test/vendor/ceedling/vendor/c_exception/lib/meson.build @@ -6,6 +6,6 @@ # cexception_dir = include_directories('.') -cexception_lib = static_library(meson.project_name(), +cexception_lib = static_library(meson.project_name(), files('CException.c'), include_directories : cexception_dir) diff --git a/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c b/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c index 88f2c2b25..d8bdb1369 100644 --- a/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c +++ b/test/unit-test/vendor/ceedling/vendor/cmock/src/cmock.c @@ -213,4 +213,3 @@ void CMock_Guts_MemFreeFinal(void) } #endif } - diff --git a/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build b/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build index c03c4e5bb..b3145c02e 100644 --- a/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build +++ b/test/unit-test/vendor/ceedling/vendor/cmock/src/meson.build @@ -6,7 +6,7 @@ # cmock_dir = include_directories('.') -cmock_lib = static_library(meson.project_name(), +cmock_lib = static_library(meson.project_name(), files('cmock.c'), dependencies: [unity_dep], include_directories: cmock_dir) diff --git a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb index 581afc7e6..cbeb8267a 100644 --- a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb +++ b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy.rb @@ -18,8 +18,8 @@ module DIY #:nodoc:# raise "Nil context hash" unless context_hash raise "Need a hash" unless context_hash.kind_of?(Hash) [ "[]", "keys" ].each do |mname| - unless extra_inputs.respond_to?(mname) - raise "Extra inputs must respond to hash-like [] operator and methods #keys and #each" + unless extra_inputs.respond_to?(mname) + raise "Extra inputs must respond to hash-like [] operator and methods #keys and #each" end end @@ -37,7 +37,7 @@ module DIY #:nodoc:# @cache = {} @cache['this_context'] = self end - + # Convenience: create a new DIY::Context by loading from a String (or open file handle.) def self.from_yaml(io_or_string, extra_inputs={}) @@ -51,7 +51,7 @@ module DIY #:nodoc:# self.from_yaml(File.read(fname), extra_inputs) end - # Return a reference to the object named. If necessary, the object will + # Return a reference to the object named. If necessary, the object will # be instantiated on first use. If the object is non-singleton, a new # object will be produced each time. def get_object(obj_name) @@ -77,7 +77,7 @@ module DIY #:nodoc:# end alias :[] :get_object - # Inject a named object into the Context. This must be done before the Context has instantiated the + # Inject a named object into the Context. This must be done before the Context has instantiated the # object in question. def set_object(obj_name,obj) key = obj_name.to_s @@ -108,9 +108,9 @@ module DIY #:nodoc:# @defs.keys.member?(key) or extra_inputs_has(key) end - # Every top level object in the Context is instantiated. This is especially useful for + # Every top level object in the Context is instantiated. This is especially useful for # systems that have "floating observers"... objects that are never directly accessed, who - # would thus never be instantiated by coincedence. This does not build any subcontexts + # would thus never be instantiated by coincedence. This does not build any subcontexts # that may exist. def build_everything @defs.keys.each { |k| self[k] } @@ -131,7 +131,7 @@ module DIY #:nodoc:# # we modify the info hash below so it's important to have a new # instance to play with info = info.dup if info - + # see if we are building a factory if info and info.has_key?('builds') unless info.has_key?('auto_require') @@ -150,21 +150,21 @@ module DIY #:nodoc:# name = name.to_s case name - when /^\+/ + when /^\+/ # subcontext @sub_context_defs[name.gsub(/^\+/,'')] = info - + when /^using_namespace/ # namespace: use a module(s) prefix for the classname of contained object defs # NOTE: namespacing is NOT scope... it's just a convenient way to setup class names for a group of objects. get_defs_from info, parse_namespace(name) when /^method\s/ key_name = name.gsub(/^method\s/, "") - @defs[key_name] = MethodDef.new(:name => key_name, - :object => info['object'], + @defs[key_name] = MethodDef.new(:name => key_name, + :object => info['object'], :method => info['method'], :attach => info['attach']) - else + else # Normal object def info ||= {} if extra_inputs_has(name) @@ -173,14 +173,14 @@ module DIY #:nodoc:# unless info.has_key?('auto_require') info['auto_require'] = self.class.auto_require end - if namespace + if namespace if info['class'] info['class'] = namespace.build_classname(info['class']) else info['class'] = namespace.build_classname(name) end end - + @defs[name] = ObjectDef.new(:name => name, :info => info) end @@ -191,10 +191,10 @@ module DIY #:nodoc:# method_definition = @defs[key] object = get_object(method_definition.object) method = object.method(method_definition.method) - + unless method_definition.attach.nil? instance_var_name = "@__diy_#{method_definition.object}" - + method_definition.attach.each do |object_key| get_object(object_key).instance_eval do instance_variable_set(instance_var_name, object) @@ -202,14 +202,14 @@ module DIY #:nodoc:# #{instance_var_name}.#{method_definition.method}(*args) end| end - end + end end - + return method rescue Exception => oops build_and_raise_construction_error(key, oops) end - + def construct_object(key) # Find the object definition obj_def = @defs[key] @@ -242,13 +242,13 @@ module DIY #:nodoc:# rescue Exception => oops build_and_raise_construction_error(key, oops) end - + def build_and_raise_construction_error(key, oops) cerr = ConstructionError.new(key,oops) cerr.set_backtrace(oops.backtrace) raise cerr end - + def get_class_for_name_with_module_delimeters(class_name) class_name.split(/::/).inject(Object) do |mod,const_name| mod.const_get(const_name) end end @@ -264,7 +264,7 @@ module DIY #:nodoc:# Namespace.new(str) end end - + class Namespace #:nodoc:# def initialize(str) # 'using_namespace Animal Reptile' @@ -292,15 +292,15 @@ module DIY #:nodoc:# @name = obj_name end end - + class MethodDef #:nodoc: attr_accessor :name, :object, :method, :attach - + def initialize(opts) @name, @object, @method, @attach = opts[:name], opts[:object], opts[:method], opts[:attach] end end - + class ObjectDef #:nodoc: attr_accessor :name, :class_name, :library, :components def initialize(opts) @@ -330,7 +330,7 @@ module DIY #:nodoc:# # Use Class Directly @use_class_directly = info.delete 'use_class_directly' - + # Auto-compose compose = info.delete 'compose' if compose @@ -380,7 +380,7 @@ module DIY #:nodoc:# object_name = object_name cause = cause m = "Failed to construct '#{object_name}'" - if cause + if cause m << "\n ...caused by:\n >>> #{cause}" end super m @@ -388,11 +388,11 @@ module DIY #:nodoc:# end class NamespaceError < RuntimeError #:nodoc:# - end + end module Infl #:nodoc:# # Ganked this from Inflector: - def self.camelize(lower_case_and_underscored_word) + def self.camelize(lower_case_and_underscored_word) lower_case_and_underscored_word.to_s.gsub(/\/(.?)/) { "::" + $1.upcase }.gsub(/(^|_)(.)/) { $2.upcase } end # Ganked this from Inflector: diff --git a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb index d2566c5d1..8f00e5e45 100644 --- a/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb +++ b/test/unit-test/vendor/ceedling/vendor/diy/lib/diy/factory.rb @@ -1,7 +1,7 @@ module DIY #:nodoc:# class FactoryDef #:nodoc: attr_accessor :name, :target, :class_name, :library - + def initialize(opts) @name, @target, @library, @auto_require = opts[:name], opts[:target], opts[:library], opts[:auto_require] @@ -10,7 +10,7 @@ module DIY #:nodoc:# @library ||= Infl.underscore(@class_name) if @auto_require end end - + class Context def construct_factory(key) factory_def = @defs[key] @@ -33,4 +33,3 @@ module DIY #:nodoc:# end end end - diff --git a/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml b/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml index 4a5e47424..c7679aefc 100644 --- a/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml +++ b/test/unit-test/vendor/ceedling/vendor/unity/auto/generate_config.yml @@ -18,7 +18,7 @@ - Defs.h - Board.h - Exception.h - :boilerplates: + :boilerplates: #these are inserted at the top of generated files. #just comment out or remove if not desired. #use %1$s where you would like the file name to appear (path/extension not included) diff --git a/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build b/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build index 1c7b426ff..5acd51a9b 100644 --- a/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build +++ b/test/unit-test/vendor/ceedling/vendor/unity/src/meson.build @@ -6,6 +6,6 @@ # unity_dir = include_directories('.') -unity_lib = static_library(meson.project_name(), +unity_lib = static_library(meson.project_name(), files('unity.c'), include_directories: unity_dir) diff --git a/tools/build_board.py b/tools/build_board.py index 4593dafa5..13376d126 100644 --- a/tools/build_board.py +++ b/tools/build_board.py @@ -56,7 +56,7 @@ if __name__ == '__main__': result = pool.starmap(build_utils.build_example, pool_args) # sum all element of same index (column sum) result = list(map(sum, list(zip(*result)))) - + # add to total result total_result = list(map(lambda x, y: x + y, total_result, result)) diff --git a/tools/build_utils.py b/tools/build_utils.py index de9052d2d..d0ef52717 100644 --- a/tools/build_utils.py +++ b/tools/build_utils.py @@ -124,4 +124,4 @@ def build_size(make_cmd): sram_size = int(size_list[1]) + int(size_list[2]) return (flash_size, sram_size) - return (0, 0) \ No newline at end of file + return (0, 0) diff --git a/tools/iar_template.ipcf b/tools/iar_template.ipcf index ba54fe057..d243aab0a 100644 --- a/tools/iar_template.ipcf +++ b/tools/iar_template.ipcf @@ -141,5 +141,5 @@ $TUSB_DIR$/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_IAR.c - + diff --git a/tools/mksunxi.py b/tools/mksunxi.py index 04786f429..fd8557cfc 100644 --- a/tools/mksunxi.py +++ b/tools/mksunxi.py @@ -45,4 +45,4 @@ if __name__ == "__main__": if len(sys.argv) != 3: print("Usage: mksunxi.py input.bin output.bin") exit(1) - exit(process_file(sys.argv[1], sys.argv[2])) \ No newline at end of file + exit(process_file(sys.argv[1], sys.argv[2])) diff --git a/tools/pcapng_to_corpus.py b/tools/pcapng_to_corpus.py index 78b1f77a2..9c31365eb 100755 --- a/tools/pcapng_to_corpus.py +++ b/tools/pcapng_to_corpus.py @@ -16,7 +16,7 @@ def extract_packets(pcap_file): def build_corpus_zip(zip_file_output, packets): """Builds a zip file with a file per packet - + The structure of this zip corpus is a simple content addressable storage i.e. seed_file_name == sha256_digest(packet). """ @@ -25,7 +25,7 @@ def build_corpus_zip(zip_file_output, packets): hash = hashlib.sha256(packet).hexdigest() if hash not in out.namelist(): out.writestr(hash, packet) - + def main(pcap_file, output_zip_file): packets = extract_packets(pcap_file) @@ -35,12 +35,10 @@ if __name__ == "__main__": parser = argparse.ArgumentParser( prog = "pcapng_to_corpus.py", description="""Converts a wireshark capture to a zip of binary packet - files suitable for an oss-fuzz corpus. In the case the - zip corpus already exists, this script will modify + files suitable for an oss-fuzz corpus. In the case the + zip corpus already exists, this script will modify the zip file in place adding seed entries.""") parser.add_argument('pcapng_capture_file') parser.add_argument('oss_fuzz_corpus_zip') args = parser.parse_args() main(args.pcapng_capture_file, args.oss_fuzz_corpus_zip) - - diff --git a/tools/usb_drivers/tinyusb_win_usbser.inf b/tools/usb_drivers/tinyusb_win_usbser.inf index e7f7a9b22..659f048ae 100644 --- a/tools/usb_drivers/tinyusb_win_usbser.inf +++ b/tools/usb_drivers/tinyusb_win_usbser.inf @@ -105,4 +105,4 @@ DRIVERFILENAME ="usbser" MFGNAME="tinyusb.org" INSTDISK="tinyusb CDC Driver" DESCRIPTION="tinyusb Serial" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file +SERVICE="USB RS-232 Emulation Driver" -- cgit v1.3.1