From 8a9d2b4b759990f9609a33c313b154cc7314bec7 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 4 May 2023 23:29:37 +0700 Subject: wip --- examples/device/cdc_msc/CMakeLists.txt | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'examples/device') diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 7eddc2422..1115f51d1 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -29,6 +29,13 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# define tinyusb_config target +add_library(tinyusb_config INTERFACE) + +target_include_directories(tinyusb_config INTERFACE + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) -- cgit v1.3.1 From f15f79df5d242fdeff06dff14a9550905f29d514 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 6 May 2023 15:14:54 +0700 Subject: cmake work well with imxrt --- examples/CMakeLists.txt | 6 +- examples/device/CMakeLists.txt | 2 +- examples/device/audio_test/CMakeLists.txt | 4 +- .../device/audio_test_multi_rate/CMakeLists.txt | 4 +- examples/device/board_test/CMakeLists.txt | 8 +- examples/device/cdc_dual_ports/CMakeLists.txt | 10 +- examples/device/cdc_msc/CMakeLists.txt | 15 +-- examples/device/cdc_msc_freertos/CMakeLists.txt | 2 +- .../device/hid_composite_freertos/CMakeLists.txt | 2 +- examples/host/cdc_msc_hid/CMakeLists.txt | 2 +- hw/bsp/family_support.cmake | 4 +- hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake | 17 +-- hw/bsp/imxrt/family.cmake | 145 +++++++++++---------- src/CMakeLists.txt | 104 +++++++-------- 14 files changed, 163 insertions(+), 162 deletions(-) (limited to 'examples/device') diff --git a/examples/CMakeLists.txt b/examples/CMakeLists.txt index d91d8ca62..a23b4ed62 100644 --- a/examples/CMakeLists.txt +++ b/examples/CMakeLists.txt @@ -3,8 +3,8 @@ cmake_minimum_required(VERSION 3.5) #set(CMAKE_EXPORT_COMPILE_COMMANDS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../hw/bsp/family_support.cmake) -project(tinyusb_examples) +project(tinyusb_examples C CXX ASM) add_subdirectory(device) -add_subdirectory(dual) -add_subdirectory(host) +#add_subdirectory(dual) +#add_subdirectory(host) diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 5520209e0..ac1bbf161 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 3.5) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) -project(tinyusb_device_examples) +project(tinyusb_device_examples C CXX ASM) family_initialize_project(tinyusb_device_examples ${CMAKE_CURRENT_LIST_DIR}) # family_add_subdirectory will filter what to actually add based on selected FAMILY diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index b0889285c..87b7d07d4 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -21,12 +21,12 @@ add_executable(${PROJECT}) target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c -) + ) # Example include target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src -) + ) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt index b0889285c..87b7d07d4 100644 --- a/examples/device/audio_test_multi_rate/CMakeLists.txt +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -21,12 +21,12 @@ add_executable(${PROJECT}) target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c -) + ) # Example include target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src -) + ) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index c48efdaa5..4ab8d5a65 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -19,13 +19,13 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index d142e9c04..87b7d07d4 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -19,14 +19,14 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 1115f51d1..63030e733 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -19,20 +19,13 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - -# define tinyusb_config target -add_library(tinyusb_config INTERFACE) - -target_include_directories(tinyusb_config INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}/src ) diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index 699860223..75ec33145 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -35,7 +35,7 @@ target_include_directories(${PROJECT} PUBLIC family_configure_device_example(${PROJECT}) if (NOT TARGET freertos_kernel) -family_add_freertos_config(${PROJECT}) +family_configure_freertos_example(${PROJECT}) add_subdirectory(${CMAKE_CURRENT_SOURCE_DIR}/../../../lib/FreeRTOS-Kernel lib/FreeRTOS-Kernel) endif() diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt index 9b0ffa4b6..30729f438 100644 --- a/examples/device/hid_composite_freertos/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/CMakeLists.txt @@ -34,7 +34,7 @@ target_include_directories(${PROJECT} PUBLIC family_configure_device_example(${PROJECT}) if (NOT TARGET freertos_kernel) -family_add_freertos_config(${PROJECT}) +family_configure_freertos_example(${PROJECT}) add_subdirectory(${CMAKE_CURRENT_SOURCE_DIR}/../../../lib/FreeRTOS-Kernel lib/FreeRTOS-Kernel) endif() diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index b66ff2382..42dac5be7 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -5,7 +5,7 @@ include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. -) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) -project(${PROJECT}) +project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index cc95dde9e..26baa6365 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -1,4 +1,6 @@ if (NOT TARGET _family_support_marker) + add_library(_family_support_marker INTERFACE) + include(CMakePrintHelpers) # Default to gcc @@ -6,8 +8,6 @@ if (NOT TARGET _family_support_marker) set(TOOLCHAIN gcc) endif() - add_library(_family_support_marker INTERFACE) - if (NOT FAMILY) message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the cmake command line") endif() diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake index c43de5ba4..d4015e488 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake @@ -1,10 +1,11 @@ set(MCU_VARIANT MIMXRT1011) -target_sources(bsp PUBLIC - ${CMAKE_CURRENT_LIST_DIR}/evkmimxrt1010_flexspi_nor_config.c - ) - -target_compile_definitions(bsp PUBLIC - CPU_MIMXRT1011DAE5A - CFG_EXAMPLE_VIDEO_READONLY - ) +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1010_flexspi_nor_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_MIMXRT1011DAE5A + CFG_EXAMPLE_VIDEO_READONLY + ) +endfunction() diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 53df88c47..1731d9e60 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -1,50 +1,34 @@ +if (TARGET _imxrt_family_inclusion_marker) + return() +endif () + +add_library(_imxrt_family_inclusion_marker INTERFACE) + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${CMAKE_CURRENT_LIST_DIR}/../../../examples/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) -function(family_configure_target TARGET) - if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") - endif () - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) - - # TOP is absolute path to root directory of TinyUSB git repo - set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") - get_filename_component(TOP "${TOP}" REALPATH) +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +set(BOARD_TARGET board_${BOARD}) +if (NOT TARGET ${BOARD_TARGET}) + # TOP is path to root directory + set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) - set(DEPS_SUBMODULES ${SDK_DIR}) + set(CMSIS_DIR ${TOP}/lib/CMSIS_5) - # define BSP target - add_library(bsp STATIC - ) - - # include board specific cmake - include(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board.cmake) - - target_compile_definitions(bsp PUBLIC - CFG_TUSB_MCU=OPT_MCU_MIMXRT - __ARMVFP__=0 - __ARMFPV5__=0 - XIP_EXTERNAL_FLASH=1 - XIP_BOOT_HEADER_ENABLE=1 - ) - - target_link_options(${TARGET} PUBLIC - --specs=nosys.specs - --specs=nano.specs - ) - - target_sources(bsp PUBLIC - # TinyUSB -# ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c -# ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c -# ${TOP}/src/portable/ehci/ehci.c - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/drivers/common/fsl_common.c ${SDK_DIR}/drivers/igpio/fsl_gpio.c ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c @@ -53,58 +37,87 @@ function(family_configure_target TARGET) ${SDK_DIR}/devices/${MCU_VARIANT}/project_template/clock_config.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUSB_MCU=OPT_MCU_MIMXRT + __ARMVFP__=0 + __ARMFPV5__=0 + XIP_EXTERNAL_FLASH=1 + XIP_BOOT_HEADER_ENABLE=1 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/project_template + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/igpio + ${SDK_DIR}/drivers/lpuart + ) + update_board(${BOARD_TARGET}) if (TOOLCHAIN STREQUAL "gcc") - target_sources(bsp PUBLIC + target_sources(${BOARD_TARGET} PUBLIC ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S ) - - target_link_options(bsp PUBLIC + target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld" + --specs=nosys.specs + --specs=nano.specs ) else () # TODO support IAR endif () +endif () # BOARD_TARGET + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_target TARGET) + # set output name to .elf + set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + + # TOP is path to root directory + set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") - target_include_directories(bsp PUBLIC + #---------- BSP_TARGET ---------- + # BSP_TARGET is built for each example since it depends on example's tusb_config.h + set(BSP_TARGET "${TARGET}_bsp_${BOARD}") + add_library(${BSP_TARGET} STATIC + # TinyUSB + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ) + target_include_directories(${BSP_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ${SDK_DIR}/CMSIS/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/project_template - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/igpio - ${SDK_DIR}/drivers/lpuart ) - if(NOT TARGET tinyusb_config) - message(FATAL_ERROR "tinyusb_config target not found") - endif() + #---------- TinyUSB ---------- + # tinyusb target is built for each example since it depends on example's tusb_config.h + set(TINYUSB_TARGET_PREFIX ${TARGET}) + add_library(${TARGET}_tinyusb_config INTERFACE) - target_compile_definitions(tinyusb_config INTERFACE + target_include_directories(${TARGET}_tinyusb_config INTERFACE + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + target_compile_definitions(${TARGET}_tinyusb_config INTERFACE CFG_TUSB_MCU=OPT_MCU_MIMXRT ) - # include tinyusb CMakeList.txt for tinyusb target + # tinyusb's CMakeList.txt add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) - add_library(tinyusb_port STATIC - ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c - ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c - ${TOP}/src/portable/ehci/ehci.c - ) - - - target_link_libraries(${TARGET} PUBLIC - tinyusb - bsp - ) + # Link dependencies + target_link_libraries(${BSP_TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}_tinyusb) + target_link_libraries(${TARGET} PUBLIC ${BSP_TARGET} ${TARGET}_tinyusb) endfunction() -function(family_add_freertos_config TARGET) +function(family_configure_freertos_example TARGET) add_library(freertos_config INTERFACE) # add path to FreeRTOSConfig.h diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index e7e3125a2..21aa23d54 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -3,62 +3,56 @@ cmake_minimum_required(VERSION 3.17) -if (NOT TARGET tinyusb_config) - message(FATAL_ERROR "tinyusb_config target is not defined") -endif() +# Add tinyusb to a target +function(add_tinyusb TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tusb.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/common/tusb_fifo.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/device/usbd.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/device/usbd_control.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/audio/audio_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/cdc/cdc_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/dfu/dfu_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/dfu/dfu_rt_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/hid/hid_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/midi/midi_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/msc/msc_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/net/ecm_rndis_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/net/ncm_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/usbtmc/usbtmc_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/vendor/vendor_device.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/video/video_device.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + # enable all possible warnings + target_compile_options(${TARGET} PUBLIC + ) +endfunction() -add_library(tinyusb STATIC - ${CMAKE_CURRENT_LIST_DIR}/tusb.c - ${CMAKE_CURRENT_LIST_DIR}/common/tusb_fifo.c - ${CMAKE_CURRENT_LIST_DIR}/device/usbd.c - ${CMAKE_CURRENT_LIST_DIR}/device/usbd_control.c - ${CMAKE_CURRENT_LIST_DIR}/class/audio/audio_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/cdc/cdc_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/dfu/dfu_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/dfu/dfu_rt_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/hid/hid_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/midi/midi_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/msc/msc_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/net/ecm_rndis_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/net/ncm_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/usbtmc/usbtmc_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/vendor/vendor_device.c - ${CMAKE_CURRENT_LIST_DIR}/class/video/video_device.c - ) +set(TINYUSB_TARGET "tinyusb") +set(TINYUSB_CONFIG_TARGET "tinyusb_config") -target_include_directories(tinyusb PUBLIC - ${CMAKE_CURRENT_LIST_DIR} - ) +if (DEFINED TINYUSB_TARGET_PREFIX) + set(TINYUSB_TARGET "${TINYUSB_TARGET_PREFIX}_${TINYUSB_TARGET}") + set(TINYUSB_CONFIG_TARGET "${TINYUSB_TARGET_PREFIX}_${TINYUSB_CONFIG_TARGET}") +endif () -target_link_libraries(tinyusb PUBLIC - tinyusb_config - ) +if (DEFINED TINYUSB_TARGET_SUFFIX) + set(TINYUSB_TARGET "${TINYUSB_TARGET}_${TINYUSB_TARGET_SUFFIX}") + set(TINYUSB_CONFIG_TARGET "${TINYUSB_CONFIG_TARGET}_${TINYUSB_TARGET_SUFFIX}") +endif () + +add_library(${TINYUSB_TARGET} STATIC) +add_tinyusb(${TINYUSB_TARGET}) -#function(add_tinyusb TARGET) -# target_sources(${TARGET} PUBLIC -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tusb.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/common/tusb_fifo.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/device/usbd.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/device/usbd_control.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/audio/audio_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/cdc/cdc_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/dfu/dfu_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/dfu/dfu_rt_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/hid/hid_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/midi/midi_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/msc/msc_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/net/ecm_rndis_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/net/ncm_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/usbtmc/usbtmc_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/vendor/vendor_device.c -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/video/video_device.c -# ) -# -# target_include_directories(${TARGET} PUBLIC -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR} -# ) -# -# # enable all possible warnings -# target_compile_options(${TARGET} PUBLIC -# ) -#endfunction() +# Link with tinyusb_config target + +if (NOT TARGET ${TINYUSB_CONFIG_TARGET}) + message(FATAL_ERROR "${TINYUSB_CONFIG_TARGET} target is not defined") +endif() + +target_link_libraries(${TINYUSB_TARGET} PUBLIC + ${TINYUSB_CONFIG_TARGET} + ) -- cgit v1.3.1 From 6945c594d53ca6a35f1f0bb120b5a652c6ce9e84 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 7 May 2023 22:09:08 +0700 Subject: update all device cmake example for imx --- .idea/runConfigurations/rt10xx_pyocd.xml | 7 --- examples/CMakeLists.txt | 6 +-- examples/cmake/cpu/cortex-m7.cmake | 18 +++++--- examples/device/CMakeLists.txt | 2 +- examples/device/cdc_msc_freertos/CMakeLists.txt | 10 +---- .../device/hid_composite_freertos/CMakeLists.txt | 10 +---- examples/dual/CMakeLists.txt | 4 +- .../dual/host_hid_to_device_cdc/CMakeLists.txt | 4 +- examples/host/CMakeLists.txt | 4 +- examples/host/bare_api/CMakeLists.txt | 4 +- examples/host/hid_controller/CMakeLists.txt | 4 +- examples/host/msc_file_explorer/CMakeLists.txt | 4 +- hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt | 8 ++++ hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake | 3 ++ hw/bsp/imxrt/family.cmake | 52 ++++++++++++++-------- src/CMakeLists.txt | 8 ++-- 16 files changed, 81 insertions(+), 67 deletions(-) delete mode 100644 .idea/runConfigurations/rt10xx_pyocd.xml create mode 100644 hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt (limited to 'examples/device') diff --git a/.idea/runConfigurations/rt10xx_pyocd.xml b/.idea/runConfigurations/rt10xx_pyocd.xml deleted file mode 100644 index f5c142690..000000000 --- a/.idea/runConfigurations/rt10xx_pyocd.xml +++ /dev/null @@ -1,7 +0,0 @@ - - - - - - \ No newline at end of file diff --git a/examples/CMakeLists.txt b/examples/CMakeLists.txt index a23b4ed62..91c9fb098 100644 --- a/examples/CMakeLists.txt +++ b/examples/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) #set(CMAKE_EXPORT_COMPILE_COMMANDS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../hw/bsp/family_support.cmake) @@ -6,5 +6,5 @@ include(${CMAKE_CURRENT_SOURCE_DIR}/../hw/bsp/family_support.cmake) project(tinyusb_examples C CXX ASM) add_subdirectory(device) -#add_subdirectory(dual) -#add_subdirectory(host) +add_subdirectory(dual) +add_subdirectory(host) diff --git a/examples/cmake/cpu/cortex-m7.cmake b/examples/cmake/cpu/cortex-m7.cmake index 2b258726f..458d8b438 100644 --- a/examples/cmake/cpu/cortex-m7.cmake +++ b/examples/cmake/cpu/cortex-m7.cmake @@ -1,6 +1,12 @@ -set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m7 - -mfloat-abi=hard - -mfpu=fpv5-d16 - ) +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m7 + -mfloat-abi=hard + -mfpu=fpv5-d16 + ) + + set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") +else () + # TODO support IAR +endif () diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index ac1bbf161..5b077a5e1 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index 75ec33145..319ad0356 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -34,11 +34,5 @@ target_include_directories(${PROJECT} PUBLIC # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) -if (NOT TARGET freertos_kernel) -family_configure_freertos_example(${PROJECT}) -add_subdirectory(${CMAKE_CURRENT_SOURCE_DIR}/../../../lib/FreeRTOS-Kernel lib/FreeRTOS-Kernel) -endif() - -target_link_libraries(${PROJECT} PUBLIC - freertos_kernel - ) +# Add FreeRTOS for this example +family_add_freertos(${PROJECT}) diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt index 30729f438..211904cf9 100644 --- a/examples/device/hid_composite_freertos/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/CMakeLists.txt @@ -33,11 +33,5 @@ target_include_directories(${PROJECT} PUBLIC # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) -if (NOT TARGET freertos_kernel) -family_configure_freertos_example(${PROJECT}) -add_subdirectory(${CMAKE_CURRENT_SOURCE_DIR}/../../../lib/FreeRTOS-Kernel lib/FreeRTOS-Kernel) -endif() - -target_link_libraries(${PROJECT} PUBLIC - freertos_kernel - ) +# Add FreeRTOS for this example +family_add_freertos(${PROJECT}) diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt index d2f9a42f0..d211c8b83 100644 --- a/examples/dual/CMakeLists.txt +++ b/examples/dual/CMakeLists.txt @@ -1,8 +1,8 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) -project(tinyusb_dual_examples) +project(tinyusb_dual_examples C CXX ASM) family_initialize_project(tinyusb_dual_examples ${CMAKE_CURRENT_LIST_DIR}) if (FAMILY STREQUAL "rp2040" AND NOT TARGET tinyusb_pico_pio_usb) message("Skipping dual host/device mode examples as Pico-PIO-USB is not available") diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index 724d1e119..3505d39eb 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -1,11 +1,11 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. -) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) -project(${PROJECT}) +project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index 758973ab2..bedd2220b 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -1,8 +1,8 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) -project(tinyusb_host_examples) +project(tinyusb_host_examples C CXX ASM) family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) # family_add_subdirectory will filter what to actually add based on selected FAMILY diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 616edd4ac..b6d8c9c89 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -1,11 +1,11 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) -project(${PROJECT}) +project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index ac3070b82..e1d2f1642 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -1,11 +1,11 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. -) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) -project(${PROJECT}) +project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 7955b3078..2ab0aa881 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -1,11 +1,11 @@ -cmake_minimum_required(VERSION 3.5) +cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. -) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) -project(${PROJECT}) +project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) diff --git a/hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt b/hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt new file mode 100644 index 000000000..0bacaf824 --- /dev/null +++ b/hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt @@ -0,0 +1,8 @@ +if (NOT TARGET freertos_config) + add_library(freertos_config INTERFACE) + + # add path to FreeRTOSConfig.h + target_include_directories(freertos_config SYSTEM INTERFACE + ${CMAKE_CURRENT_LIST_DIR} + ) +endif() diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake index d4015e488..02955e356 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake @@ -1,5 +1,8 @@ set(MCU_VARIANT MIMXRT1011) +set(JLINK_DEVICE MIMXRT1011DAE5A) +set(PYOCD_TARGET mimxrt1010) + function(update_board TARGET) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1010_flexspi_nor_config.c diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 1731d9e60..653885bb2 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -81,7 +81,7 @@ function(family_configure_target TARGET) #---------- BSP_TARGET ---------- # BSP_TARGET is built for each example since it depends on example's tusb_config.h - set(BSP_TARGET "${TARGET}_bsp_${BOARD}") + set(BSP_TARGET "${TARGET}-bsp") add_library(${BSP_TARGET} STATIC # TinyUSB ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -98,13 +98,13 @@ function(family_configure_target TARGET) #---------- TinyUSB ---------- # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}) - add_library(${TARGET}_tinyusb_config INTERFACE) + set(TINYUSB_TARGET_PREFIX ${TARGET}-) + add_library(${TARGET}-tinyusb_config INTERFACE) - target_include_directories(${TARGET}_tinyusb_config INTERFACE + target_include_directories(${TARGET}-tinyusb_config INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}/src ) - target_compile_definitions(${TARGET}_tinyusb_config INTERFACE + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_MCU=OPT_MCU_MIMXRT ) @@ -112,25 +112,41 @@ function(family_configure_target TARGET) add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) # Link dependencies - target_link_libraries(${BSP_TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}_tinyusb) - target_link_libraries(${TARGET} PUBLIC ${BSP_TARGET} ${TARGET}_tinyusb) + target_link_libraries(${BSP_TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC ${BSP_TARGET} ${TARGET}-tinyusb) + + # Flash Target + add_custom_target(${TARGET}-pyocd + COMMAND pyocd flash -t ${PYOCD_TARGET} $ + ) endfunction() -function(family_configure_freertos_example TARGET) - add_library(freertos_config INTERFACE) +function(family_add_freertos TARGET) + # freertos_config + add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig ${CMAKE_CURRENT_BINARY_DIR}/freertos_config) + + ## freertos + if (NOT TARGET freertos_kernel) + add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../../lib/FreeRTOS-Kernel ${CMAKE_CURRENT_BINARY_DIR}/freertos_kernel) + endif () - # add path to FreeRTOSConfig.h - target_include_directories(freertos_config SYSTEM INTERFACE - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig + # Add FreeRTOS option to tinyusb_config + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_OS=OPT_OS_FREERTOS + ) + # tinyusb need to be linked with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel ) - # select freertos port - if (TOOLCHAIN STREQUAL "gcc") - set(FREERTOS_PORT "GCC_ARM_CM7" CACHE INTERNAL "") - else () - # TODO support IAR - endif () + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel + ) + + target_link_libraries(${TARGET} PUBLIC + freertos_kernel + ) endfunction() function(family_configure_device_example TARGET) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 21aa23d54..02f962f44 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -35,13 +35,13 @@ set(TINYUSB_TARGET "tinyusb") set(TINYUSB_CONFIG_TARGET "tinyusb_config") if (DEFINED TINYUSB_TARGET_PREFIX) - set(TINYUSB_TARGET "${TINYUSB_TARGET_PREFIX}_${TINYUSB_TARGET}") - set(TINYUSB_CONFIG_TARGET "${TINYUSB_TARGET_PREFIX}_${TINYUSB_CONFIG_TARGET}") + set(TINYUSB_TARGET "${TINYUSB_TARGET_PREFIX}${TINYUSB_TARGET}") + set(TINYUSB_CONFIG_TARGET "${TINYUSB_TARGET_PREFIX}${TINYUSB_CONFIG_TARGET}") endif () if (DEFINED TINYUSB_TARGET_SUFFIX) - set(TINYUSB_TARGET "${TINYUSB_TARGET}_${TINYUSB_TARGET_SUFFIX}") - set(TINYUSB_CONFIG_TARGET "${TINYUSB_CONFIG_TARGET}_${TINYUSB_TARGET_SUFFIX}") + set(TINYUSB_TARGET "${TINYUSB_TARGET}${TINYUSB_TARGET_SUFFIX}") + set(TINYUSB_CONFIG_TARGET "${TINYUSB_CONFIG_TARGET}${TINYUSB_TARGET_SUFFIX}") endif () add_library(${TINYUSB_TARGET} STATIC) -- cgit v1.3.1 From 4fc4f35a8af6465eb2137f765e994de1029e9c5a Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 8 May 2023 17:25:47 +0700 Subject: fix linking missing ivt symbol for imxrt with cmake changed device port = 0, host port =1 for imxrt 1060 and 1064 --- .idea/runConfigurations/rt1010.xml | 10 ++++++++++ .idea/runConfigurations/rt10xx.xml | 10 ---------- .idea/runConfigurations/tinyusb_examples.xml | 5 ----- examples/cmake/cpu/cortex-m7.cmake | 2 +- examples/cmake/toolchain/arm_gcc.cmake | 8 +++++++- examples/cmake/toolchain/set_flags.cmake | 3 +++ examples/device/cdc_msc/CMakeLists.txt | 1 + examples/rules.mk | 2 +- hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake | 15 +++++++++++++++ hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk | 4 ++-- hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake | 15 +++++++++++++++ hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk | 4 ++-- hw/bsp/imxrt/family.c | 1 + hw/bsp/imxrt/family.cmake | 12 +++++++++++- 14 files changed, 69 insertions(+), 23 deletions(-) create mode 100644 .idea/runConfigurations/rt1010.xml delete mode 100644 .idea/runConfigurations/rt10xx.xml delete mode 100644 .idea/runConfigurations/tinyusb_examples.xml create mode 100644 hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake create mode 100644 hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake (limited to 'examples/device') diff --git a/.idea/runConfigurations/rt1010.xml b/.idea/runConfigurations/rt1010.xml new file mode 100644 index 000000000..700cb5732 --- /dev/null +++ b/.idea/runConfigurations/rt1010.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/rt10xx.xml b/.idea/runConfigurations/rt10xx.xml deleted file mode 100644 index 332b4d477..000000000 --- a/.idea/runConfigurations/rt10xx.xml +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - \ No newline at end of file diff --git a/.idea/runConfigurations/tinyusb_examples.xml b/.idea/runConfigurations/tinyusb_examples.xml deleted file mode 100644 index 60e586bbc..000000000 --- a/.idea/runConfigurations/tinyusb_examples.xml +++ /dev/null @@ -1,5 +0,0 @@ - - - - - \ No newline at end of file diff --git a/examples/cmake/cpu/cortex-m7.cmake b/examples/cmake/cpu/cortex-m7.cmake index 458d8b438..481c86bc5 100644 --- a/examples/cmake/cpu/cortex-m7.cmake +++ b/examples/cmake/cpu/cortex-m7.cmake @@ -1,5 +1,5 @@ if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS + list(APPEND TOOLCHAIN_COMMON_FLAGS -mthumb -mcpu=cortex-m7 -mfloat-abi=hard diff --git a/examples/cmake/toolchain/arm_gcc.cmake b/examples/cmake/toolchain/arm_gcc.cmake index c5937192e..c7b6cff98 100644 --- a/examples/cmake/toolchain/arm_gcc.cmake +++ b/examples/cmake/toolchain/arm_gcc.cmake @@ -25,7 +25,13 @@ list(APPEND TOOLCHAIN_COMMON_FLAGS -fno-strict-aliasing ) -set(TOOLCHAIN_WARNING_FLAGS +list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS + -Wl,--print-memory-usage + -Wl,--gc-sections + -Wl,--cref + ) + +list(APPEND TOOLCHAIN_WARNING_FLAGS -Wall -Wextra -Werror diff --git a/examples/cmake/toolchain/set_flags.cmake b/examples/cmake/toolchain/set_flags.cmake index da381c254..27631abcd 100644 --- a/examples/cmake/toolchain/set_flags.cmake +++ b/examples/cmake/toolchain/set_flags.cmake @@ -11,6 +11,9 @@ foreach(LANG IN ITEMS C CXX ASM) set(CMAKE_${LANG}_FLAGS_DEBUG_INIT "-Og") endforeach() +# Linker +list(JOIN TOOLCHAIN_EXE_LINKER_FLAGS " " CMAKE_EXE_LINKER_FLAGS_INIT) + # try_compile is cmake test compiling its own example, # pass -nostdlib to skip stdlib linking get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 63030e733..4ec172f17 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,4 +1,5 @@ cmake_minimum_required(VERSION 3.17) +set_property(GLOBAL PROPERTY USE_FOLDERS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/rules.mk b/examples/rules.mk index c125408df..3ec3c880b 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -169,7 +169,7 @@ $(BUILD)/$(PROJECT).hex: $(BUILD)/$(PROJECT).elf $(BUILD)/$(PROJECT).elf: $(OBJ) @echo LINK $@ - @$(LD) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group + @$(LD) -o $@ $(LDFLAGS) $^ -Wl,--print-memory-usage -Wl,--start-group $(LIBS) -Wl,--end-group endif diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake new file mode 100644 index 000000000..033f9fcf9 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake @@ -0,0 +1,15 @@ +set(MCU_VARIANT MIMXRT1062) + +set(JLINK_DEVICE MIMXRT1062xxx6A) +set(PYOCD_TARGET mimxrt1060) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1060_flexspi_nor_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_MIMXRT1062DVL6A + BOARD_TUD_RHPORT=0 + BOARD_TUH_RHPORT=1 + ) +endfunction() diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk index d21063c99..0317ee452 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk @@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1062xxx6A # For flash-pyocd target PYOCD_TARGET = mimxrt1060 -BOARD_TUD_RHPORT = 1 -BOARD_TUH_RHPORT = 0 +BOARD_TUD_RHPORT = 0 +BOARD_TUH_RHPORT = 1 # flash using pyocd flash: flash-pyocd diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake new file mode 100644 index 000000000..925664b41 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake @@ -0,0 +1,15 @@ +set(MCU_VARIANT MIMXRT1064) + +set(JLINK_DEVICE MIMXRT1064xxx6A) +set(PYOCD_TARGET mimxrt1064) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1064_flexspi_nor_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_MIMXRT1064DVL6A + BOARD_TUD_RHPORT=0 + BOARD_TUH_RHPORT=1 + ) +endfunction() diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk index 00b574c52..ddde419ae 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk @@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1064xxx6A # For flash-pyocd target PYOCD_TARGET = mimxrt1064 -BOARD_TUD_RHPORT = 1 -BOARD_TUH_RHPORT = 0 +BOARD_TUD_RHPORT = 0 +BOARD_TUH_RHPORT = 1 # flash using pyocd flash: flash-pyocd diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 5eb672c24..b009b27e1 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -47,6 +47,7 @@ #endif // needed by fsl_flexspi_nor_boot +TU_ATTR_USED const uint8_t dcd_data[] = { 0x00 }; //--------------------------------------------------------------------+ diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index b180f725e..9e084b4fd 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -63,8 +63,13 @@ if (NOT TARGET ${BOARD_TARGET}) ) target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld" + "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" + # nanolib --specs=nosys.specs --specs=nano.specs + # force linker to look for these symbols + -Wl,-uimage_vector_table + -Wl,-ug_boot_data ) else () # TODO support IAR @@ -116,12 +121,17 @@ function(family_configure_target TARGET) # Link dependencies target_link_libraries(${BSP_TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - target_link_libraries(${TARGET} PUBLIC ${BSP_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${BSP_TARGET} ${TARGET}-tinyusb) # Flash Target add_custom_target(${TARGET}-pyocd COMMAND pyocd flash -t ${PYOCD_TARGET} $ ) + + # group target + set_target_properties(${BSP_TARGET} ${TARGET}-tinyusb ${TARGET}-tinyusb_config ${TARGET}-pyocd + PROPERTIES FOLDER ${TARGET} + ) endfunction() -- cgit v1.3.1 From 4c796b89d80606e40fb098f1b4b5496dbb5bb7dc Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 10 May 2023 11:20:26 +0700 Subject: try to build with cmake on ci --- .github/workflows/cmake_arm.yml | 58 +++++++++++++++++++++++++++++++++++++++++ examples/device/CMakeLists.txt | 7 ++++- 2 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 .github/workflows/cmake_arm.yml (limited to 'examples/device') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml new file mode 100644 index 000000000..98aae7df2 --- /dev/null +++ b/.github/workflows/cmake_arm.yml @@ -0,0 +1,58 @@ +name: CMake Build ARM + +on: + push: + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - '.github/workflows/cmake_arm.yml' + pull_request: + branches: [ master ] + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - '.github/workflows/cmake_arm.yml' + +concurrency: + group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + cancel-in-progress: true + +jobs: + # --------------------------------------- + # Build ARM family + # --------------------------------------- + build-arm: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + family: + # Alphabetical order + - 'imxrt' + steps: + - name: Setup Python + uses: actions/setup-python@v4 + with: + python-version: '3.x' + + - name: Install ARM GCC + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '11.2-2022.02' + + - name: Checkout TinyUSB + uses: actions/checkout@v3 + + - name: Get Dependencies + run: python3 tools/get_family_deps.py ${{ matrix.family }} + + - name: Build + run: | + mkdir -p examples/build + cd examples/build + cmake -DFAMILY=${{ matrix.family }} -DBOARD=mimxrt1060_evk .. + cmake --build . diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 5b077a5e1..10a1f4c26 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -22,7 +22,12 @@ family_add_subdirectory(hid_generic_inout) family_add_subdirectory(hid_multiple_interface) family_add_subdirectory(midi_test) family_add_subdirectory(msc_dual_lun) -family_add_subdirectory(net_lwip_webserver) + +# FIXME temp skip net_lwip_webserver for imxrt for now +if (NOT ${FAMILY} STREQUAL "imxrt") + family_add_subdirectory(net_lwip_webserver) +endif() + family_add_subdirectory(uac2_headset) family_add_subdirectory(usbtmc) family_add_subdirectory(video_capture) -- cgit v1.3.1 From 1ef820ecfe569e181b8f20cb936f632e51d8257e Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Tue, 23 May 2023 21:45:00 +0700 Subject: Enhance chipidea (#2075) * update chipidea dcd, remove manual ep_count and use DCCPARAMS to get number of endpoint instead * add dcd dcache for chipidea * add cmake for lpc18 * add makefile build for mcx * use fork of mcu sdk * fix ci build with nrf * flash rp2040 with openocd --- .github/workflows/build_arm.yml | 3 +- .github/workflows/cmake_arm.yml | 1 + .idea/cmake.xml | 7 +- .idea/runConfigurations/rt1010_jlink.xml | 10 + .idea/runConfigurations/rt1010_nxplink.xml | 10 - .idea/runConfigurations/rt1060_nxplink.xml | 10 - .pre-commit-config.yaml | 16 +- examples/device/CMakeLists.txt | 2 +- hw/bsp/board_mcu.h | 2 +- hw/bsp/family_support.cmake | 7 + hw/bsp/imxrt/family.cmake | 11 +- hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake | 11 + hw/bsp/lpc18/boards/mcb1800/board.cmake | 11 + hw/bsp/lpc18/family.cmake | 155 +++++++++++ hw/bsp/lpc55/family.cmake | 6 +- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 166 ++++++++++++ hw/bsp/mcx/boards/mcxn947brk/board.cmake | 18 ++ hw/bsp/mcx/boards/mcxn947brk/board.h | 66 +++++ hw/bsp/mcx/boards/mcxn947brk/board.mk | 11 + hw/bsp/mcx/boards/mcxn947brk/clock_config.c | 338 ++++++++++++++++++++++++ hw/bsp/mcx/boards/mcxn947brk/clock_config.h | 177 +++++++++++++ hw/bsp/mcx/boards/mcxn947brk/pin_mux.c | 141 ++++++++++ hw/bsp/mcx/boards/mcxn947brk/pin_mux.h | 51 ++++ hw/bsp/mcx/family.c | 262 ++++++++++++++++++ hw/bsp/mcx/family.cmake | 179 +++++++++++++ hw/bsp/mcx/family.mk | 48 ++++ hw/bsp/nrf/family.cmake | 11 +- src/common/tusb_mcu.h | 26 +- src/device/dcd.h | 16 ++ src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 32 ++- src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h | 6 +- src/portable/chipidea/ci_hs/ci_hs_mcx.h | 52 ++++ src/portable/chipidea/ci_hs/ci_hs_type.h | 14 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 96 +++++-- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 21 +- src/portable/ehci/ehci.c | 13 +- src/tusb_option.h | 6 +- tools/cmake/cpu/cortex-m3.cmake | 10 + tools/cmake/cpu/cortex-m33.cmake | 5 +- tools/cmake/toolchain/arm_gcc.cmake | 2 + tools/get_deps.py | 2 +- tools/make/cpu/cortex-m33.mk | 4 +- 42 files changed, 1914 insertions(+), 121 deletions(-) create mode 100644 .idea/runConfigurations/rt1010_jlink.xml delete mode 100644 .idea/runConfigurations/rt1010_nxplink.xml delete mode 100644 .idea/runConfigurations/rt1060_nxplink.xml create mode 100644 hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake create mode 100644 hw/bsp/lpc18/boards/mcb1800/board.cmake create mode 100644 hw/bsp/lpc18/family.cmake create mode 100644 hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/mcx/boards/mcxn947brk/board.cmake create mode 100644 hw/bsp/mcx/boards/mcxn947brk/board.h create mode 100644 hw/bsp/mcx/boards/mcxn947brk/board.mk create mode 100644 hw/bsp/mcx/boards/mcxn947brk/clock_config.c create mode 100644 hw/bsp/mcx/boards/mcxn947brk/clock_config.h create mode 100644 hw/bsp/mcx/boards/mcxn947brk/pin_mux.c create mode 100644 hw/bsp/mcx/boards/mcxn947brk/pin_mux.h create mode 100644 hw/bsp/mcx/family.c create mode 100644 hw/bsp/mcx/family.cmake create mode 100644 hw/bsp/mcx/family.mk create mode 100644 src/portable/chipidea/ci_hs/ci_hs_mcx.h create mode 100644 tools/cmake/cpu/cortex-m3.cmake (limited to 'examples/device') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index f0b01b43d..917c83d74 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -142,8 +142,7 @@ jobs: - name: Create flash.sh run: | - #echo > flash.sh 'cmdout=$(openocd -f "interface/picoprobe.cfg" -f "target/rp2040.cfg" -c "program $1 reset exit")' - echo > flash.sh 'pyocd flash -t rp2040 $1' + echo > flash.sh 'cmdout=$(openocd -f "interface/cmsis-dap.cfg" -f "target/rp2040.cfg" -c "adapter speed 5000" -c "program $1 reset exit")' echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi' chmod +x flash.sh diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 844a03443..12173fb63 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -32,6 +32,7 @@ jobs: matrix: family: # Alphabetical order + - 'mcx' - 'imxrt' steps: - name: Setup Python diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 7dacd0003..a80ebed3c 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,8 +2,9 @@ - - + + + @@ -29,6 +30,8 @@ + + \ No newline at end of file diff --git a/.idea/runConfigurations/rt1010_jlink.xml b/.idea/runConfigurations/rt1010_jlink.xml new file mode 100644 index 000000000..70cfeea53 --- /dev/null +++ b/.idea/runConfigurations/rt1010_jlink.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/rt1010_nxplink.xml b/.idea/runConfigurations/rt1010_nxplink.xml deleted file mode 100644 index cf3bf842f..000000000 --- a/.idea/runConfigurations/rt1010_nxplink.xml +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - \ No newline at end of file diff --git a/.idea/runConfigurations/rt1060_nxplink.xml b/.idea/runConfigurations/rt1060_nxplink.xml deleted file mode 100644 index d3303bdb6..000000000 --- a/.idea/runConfigurations/rt1060_nxplink.xml +++ /dev/null @@ -1,10 +0,0 @@ - - - - - - - - - \ No newline at end of file diff --git a/.pre-commit-config.yaml b/.pre-commit-config.yaml index 6fb98afb8..4071ec326 100644 --- a/.pre-commit-config.yaml +++ b/.pre-commit-config.yaml @@ -8,8 +8,16 @@ repos: hooks: - id: check-yaml - id: trailing-whitespace + exclude: | + (?x)^( + hw/bsp/mcx/sdk/ + ) - id: end-of-file-fixer - exclude: ^.idea/ + exclude: | + (?x)^( + .idea/| + hw/bsp/mcx/sdk/ + ) - id: forbid-submodules - repo: https://github.com/codespell-project/codespell @@ -17,7 +25,11 @@ repos: hooks: - id: codespell args: [-w] - exclude: ^lib/ + exclude: | + (?x)^( + lib/| + hw/bsp/mcx/sdk/ + ) - repo: local hooks: diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 10a1f4c26..89cfceeeb 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -24,7 +24,7 @@ family_add_subdirectory(midi_test) family_add_subdirectory(msc_dual_lun) # FIXME temp skip net_lwip_webserver for imxrt for now -if (NOT ${FAMILY} STREQUAL "imxrt") +if (NOT ${FAMILY} STREQUAL "imxrt" AND NOT ${FAMILY} STREQUAL "mcx") family_add_subdirectory(net_lwip_webserver) endif() diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index cd195a19b..35210dbae 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -44,7 +44,7 @@ TU_CHECK_MCU(OPT_MCU_LPC40XX, OPT_MCU_LPC43XX) #include "chip.h" -#elif TU_CHECK_MCU(OPT_MCU_LPC51UXX, OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX) +#elif TU_CHECK_MCU(OPT_MCU_LPC51UXX, OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX, OPT_MCU_MCXN9) #include "fsl_device_registers.h" #elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 442aba955..d2d675332 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -135,6 +135,13 @@ function(family_add_default_example_warnings TARGET) endif() endfunction() + +# add_custom_command(TARGET ${TARGET} POST_BUILD +# COMMAND ${CMAKE_OBJCOPY} -O ihex $ ${TARGET}.hex +# COMMAND ${CMAKE_OBJCOPY} -O binary $ ${TARGET}.bin +# COMMENT "Creating ${TARGET}.hex and ${TARGET}.bin" +# ) + # Add flash jlink target function(family_flash_jlink TARGET) if (NOT DEFINED JLINKEXE) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 5261e5810..ade744aa5 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -1,8 +1,4 @@ -if (TARGET _imxrt_family_inclusion_marker) - return() -endif () - -add_library(_imxrt_family_inclusion_marker INTERFACE) +include_guard() if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") @@ -87,6 +83,11 @@ function(family_configure_target TARGET) # set output name to .elf set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + # run size after build + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${TOOLCHAIN_SIZE} $ + ) + # TOP is path to root directory set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake new file mode 100644 index 000000000..b540012a4 --- /dev/null +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake @@ -0,0 +1,11 @@ +set(MCU_VARIANT LPC18S37) + +set(JLINK_DEVICE LPC18S37) +set(PYOCD_TARGET LPC18S37) +set(NXPLINK_DEVICE LPC18S37:LPCXPRESSO18S37) + +set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/lpc1837.ld) + +function(update_board TARGET) + # nothing to do +endfunction() diff --git a/hw/bsp/lpc18/boards/mcb1800/board.cmake b/hw/bsp/lpc18/boards/mcb1800/board.cmake new file mode 100644 index 000000000..1efeafd12 --- /dev/null +++ b/hw/bsp/lpc18/boards/mcb1800/board.cmake @@ -0,0 +1,11 @@ +set(MCU_VARIANT LPC1857) + +set(JLINK_DEVICE LPC1857) +set(PYOCD_TARGET LPC1857) +set(NXPLINK_DEVICE LPC1857:MCB1857) + +set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/lpc1857.ld) + +function(update_board TARGET) + # nothing to do +endfunction() diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake new file mode 100644 index 000000000..059408fe9 --- /dev/null +++ b/hw/bsp/lpc18/family.cmake @@ -0,0 +1,155 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +# TOP is path to root directory +set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") +set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +set(BOARD_TARGET board_${BOARD}) +if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/../gcc/cr_startup_lpc18xx.c + ${SDK_DIR}/src/chip_18xx_43xx.c + ${SDK_DIR}/src/clock_18xx_43xx.c + ${SDK_DIR}/src/gpio_18xx_43xx.c + ${SDK_DIR}/src/sysinit_18xx_43xx.c + ${SDK_DIR}/src/uart_18xx_43xx.c + ) + target_compile_options(${BOARD_TARGET} PUBLIC + -nostdlib + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __USE_LPCOPEN + CORE_M3 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/inc + ${SDK_DIR}/inc/config_18xx + ) + update_board(${BOARD_TARGET}) + + if (NOT DEFINED LD_FILE_${TOOLCHAIN}) + MESSAGE(FATAL_ERROR "LD_FILE_${TOOLCHAIN} not defined") + endif () + + if (TOOLCHAIN STREQUAL "gcc") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_gcc}" + "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + else () + # TODO support IAR + endif () +endif () # BOARD_TARGET + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_target TARGET) + # set output name to .elf + set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + + # run size after build + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${TOOLCHAIN_SIZE} $ + ) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # TinyUSB Port + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + #---------- TinyUSB ---------- + # tinyusb target is built for each example since it depends on example's tusb_config.h + set(TINYUSB_TARGET_PREFIX ${TARGET}-) + add_library(${TARGET}-tinyusb_config INTERFACE) + + target_include_directories(${TARGET}-tinyusb_config INTERFACE + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_MCU=OPT_MCU_LPC18XX + ) + + # tinyusb's CMakeList.txt + add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + + # group target (not yet supported by clion) + set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config + PROPERTIES FOLDER ${TARGET}_sub + ) + + #---------- Flash ---------- + family_flash_jlink(${TARGET}) +endfunction() + + +function(family_add_freertos TARGET) + # freertos_config + add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig ${CMAKE_CURRENT_BINARY_DIR}/freertos_config) + + ## freertos + if (NOT TARGET freertos_kernel) + add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../../lib/FreeRTOS-Kernel ${CMAKE_CURRENT_BINARY_DIR}/freertos_kernel) + endif () + + # Add FreeRTOS option to tinyusb_config + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_OS=OPT_OS_FREERTOS + ) + # link tinyusb with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel + ) + target_link_libraries(${TARGET} PUBLIC + freertos_kernel + ) +endfunction() + +function(family_configure_device_example TARGET) + family_configure_target(${TARGET}) +endfunction() + +function(family_configure_host_example TARGET) + family_configure_target(${TARGET}) +endfunction() + +function(family_configure_dual_usb_example TARGET) + family_configure_target(${TARGET}) +endfunction() diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 611c88eb5..3aeda5b2d 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -1,8 +1,4 @@ -if (TARGET _lpc55_family_inclusion_marker) - return() -endif () - -add_library(_lpc55_family_inclusion_marker INTERFACE) +include_guard() if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..4c6058d27 --- /dev/null +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,166 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// IAR assembler have limited preprocessor support and it only need following macros: +#ifndef __IASMARM__ +// FIXME cause redundant-decls warnings +extern uint32_t SystemCoreClock; +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); + CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + + /*According to reference manual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock + USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock + + /* enable USB Device clock */ + CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); +#endif + +#if PORT_SUPPORT_DEVICE(1) + // Port1 is High Speed + + // Power + SPC0->ACTIVE_VDELAY = 0x0500; + /* Change the power DCDC to 1.8v (By default, DCDC is 1.8V), CORELDO to 1.1v (By default, CORELDO is 1.0V) */ + SPC0->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_CORELDO_VDD_DS_MASK; + SPC0->ACTIVE_CFG |= SPC_ACTIVE_CFG_DCDC_VDD_LVL(0x3) | SPC_ACTIVE_CFG_CORELDO_VDD_LVL(0x3) | + SPC_ACTIVE_CFG_SYSLDO_VDD_DS_MASK | SPC_ACTIVE_CFG_DCDC_VDD_DS(0x2u); + /* Wait until it is done */ + while (SPC0->SC & SPC_SC_BUSY_MASK) {} + if (0u == (SCG0->LDOCSR & SCG_LDOCSR_LDOEN_MASK)) { + SCG0->TRIM_LOCK = 0x5a5a0001U; + SCG0->LDOCSR |= SCG_LDOCSR_LDOEN_MASK; + /* wait LDO ready */ + while (0U == (SCG0->LDOCSR & SCG_LDOCSR_VOUT_OK_MASK)); + } + SYSCON->AHBCLKCTRLSET[2] |= SYSCON_AHBCLKCTRL2_USB_HS_MASK | SYSCON_AHBCLKCTRL2_USB_HS_PHY_MASK; + SCG0->SOSCCFG &= ~(SCG_SOSCCFG_RANGE_MASK | SCG_SOSCCFG_EREFS_MASK); + /* xtal = 20 ~ 30MHz */ + SCG0->SOSCCFG = (1U << SCG_SOSCCFG_RANGE_SHIFT) | (1U << SCG_SOSCCFG_EREFS_SHIFT); + SCG0->SOSCCSR |= SCG_SOSCCSR_SOSCEN_MASK; + while (1) { + if (SCG0->SOSCCSR & SCG_SOSCCSR_SOSCVLD_MASK) { + break; + } + } + + // Clock + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK | SYSCON_CLOCK_CTRL_CLKIN_ENA_FM_USBH_LPT_MASK; + CLOCK_EnableClock(kCLOCK_UsbHs); + CLOCK_EnableClock(kCLOCK_UsbHsPhy); + CLOCK_EnableUsbhsPhyPllClock(kCLOCK_Usbphy480M, 24000000U); + CLOCK_EnableUsbhsClock(); + + // USB PHY +#if ((!(defined FSL_FEATURE_SOC_CCM_ANALOG_COUNT)) && (!(defined FSL_FEATURE_SOC_ANATOP_COUNT))) + USBPHY->TRIM_OVERRIDE_EN = 0x001fU; /* override IFR value */ +#endif + + // Enable PHY support for Low speed device + LS via FS Hub + USBPHY->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + USBPHY->PWD = 0; + + // TX Timing + uint32_t phytx = USBPHY->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x04) | USBPHY_TX_TXCAL45DP(0x07) | USBPHY_TX_TXCAL45DM(0x07); + //phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + USBPHY->TX = phytx; +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); + +#ifdef NEOPIXEL_PIN + if (state) { + sctpix_setPixel(NEOPIXEL_CH, 0, 0x100000); + sctpix_setPixel(NEOPIXEL_CH, 1, 0x101010); + } else { + sctpix_setPixel(NEOPIXEL_CH, 0, 0x001000); + sctpix_setPixel(NEOPIXEL_CH, 1, 0x000010); + } + sctpix_show(); +#endif +} + +uint32_t board_button_read(void) +{ +#ifdef BUTTON_GPIO + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +#endif +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +#ifdef UART_DEV + LPUART_WriteBlocking(UART_DEV, (uint8_t const *) buf, len); + return len; +#else + (void) buf; (void) len; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake new file mode 100644 index 000000000..e4bc11be5 --- /dev/null +++ b/hw/bsp/mcx/family.cmake @@ -0,0 +1,179 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +# TOP is path to root directory +set(TOP ${CMAKE_CURRENT_LIST_DIR}/../../..) +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS LPC55XX CACHE INTERNAL "") + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +set(BOARD_TARGET board_${BOARD}) +if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + # external driver + #lib/sct_neopixel/sct_neopixel.c + + # driver + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ) +# target_compile_definitions(${BOARD_TARGET} PUBLIC +# ) + target_include_directories(${BOARD_TARGET} PUBLIC + # driver + # mcu + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ) + update_board(${BOARD_TARGET}) + + if (TOOLCHAIN STREQUAL "gcc") + target_sources(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S + ) + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld" + # link map + "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + else () + # TODO support IAR + endif () +endif () # BOARD_TARGET + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_target TARGET) + # set output name to .elf + set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + + # run size after build + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${TOOLCHAIN_SIZE} $ + ) + + # TOP is path to root directory + set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # TinyUSB Port + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + #---------- TinyUSB ---------- + # tinyusb target is built for each example since it depends on example's tusb_config.h + set(TINYUSB_TARGET_PREFIX ${TARGET}-) + add_library(${TARGET}-tinyusb_config INTERFACE) + + target_include_directories(${TARGET}-tinyusb_config INTERFACE + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_MCU=OPT_MCU_MCXN9 + ) + + # tinyusb's CMakeList.txt + add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + + # group target (not yet supported by clion) + set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config + PROPERTIES FOLDER ${TARGET}_sub + ) + + #---------- Flash ---------- + # use MCUXpresso GUI Flash Tool to flash the elf + +# set(REDLINK_EXE /usr/local/LinkServer/binaries/crt_emu_cm_redlink) +# add_custom_target(${TARGET}-redlink +# DEPENDS ${TARGET} +# COMMAND ${REDLINK_EXE} --flash-load-exec $ --vendor NXP -p MCXN947 --bootromstall +# 0x50000040 -CoreIndex=0 --flash-driver= -x ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/flash --flash-dir +# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/flash --flash-hashing +# ) + + #family_flash_jlink(${TARGET}) + #family_flash_nxplink(${TARGET}) + #family_flash_pyocd(${TARGET}) +endfunction() + + +function(family_add_freertos TARGET) + # freertos_config + if (NOT TARGET freertos_config) + add_library(freertos_config INTERFACE) + target_include_directories(freertos_config SYSTEM INTERFACE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig + ) + endif() + + ## freertos + if (NOT TARGET freertos_kernel) + add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../../lib/FreeRTOS-Kernel ${CMAKE_CURRENT_BINARY_DIR}/freertos_kernel) + endif () + + # Add FreeRTOS option to tinyusb_config + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_OS=OPT_OS_FREERTOS + ) + # link tinyusb with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel + ) + target_link_libraries(${TARGET} PUBLIC + freertos_kernel + ) +endfunction() + +function(family_configure_device_example TARGET) + family_configure_target(${TARGET}) +endfunction() + +function(family_configure_host_example TARGET) + family_configure_target(${TARGET}) +endfunction() + +function(family_configure_dual_usb_example TARGET) + family_configure_target(${TARGET}) +endfunction() diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk new file mode 100644 index 000000000..2cd4c2448 --- /dev/null +++ b/hw/bsp/mcx/family.mk @@ -0,0 +1,48 @@ +UF2_FAMILY_ID = 0x2abc77ec +SDK_DIR = hw/mcu/nxp/mcux-sdk + +DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 + +include $(TOP)/$(BOARD_PATH)/board.mk + +CPU_CORE ?= cortex-m33 +include $(TOP)/tools/make/cpu/$(CPU_CORE).mk + +# Default to Highspeed PORT1 +PORT ?= 1 + +CFLAGS += \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ + -DBOARD_TUD_RHPORT=$(PORT) \ + +ifeq ($(PORT), 1) + $(info "PORT1 High Speed") + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED +else + $(info "PORT0 Full Speed") +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration + +# All source paths should be relative to the top level. +LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld + +SRC_C += \ + src/portable/chipidea/ci_hs/dcd_ci_hs.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/system_$(MCU_CORE).c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_gpio.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_common_arm.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpflexcomm.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpuart.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT) \ + $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers \ + +SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 9c43478e8..1156a171b 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -1,8 +1,4 @@ -if (TARGET _nrf_family_inclusion_marker) - return() -endif () - -add_library(_nrf_family_inclusion_marker INTERFACE) +include_guard() if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") @@ -89,6 +85,11 @@ function(family_configure_target TARGET) # set output name to .elf set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + # run size after build + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${TOOLCHAIN_SIZE} $ + ) + # TOP is path to root directory set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index ba8976a8c..9c2933983 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -59,14 +59,6 @@ #define TUP_USBIP_OHCI #define TUP_OHCI_RHPORTS 2 -#elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) - // TODO USB0 has 6, USB1 has 4 - #define TUP_USBIP_CHIPIDEA_HS - #define TUP_USBIP_EHCI - - #define TUP_DCD_ENDPOINT_MAX 6 - #define TUP_RHPORT_HIGHSPEED 1 // Port0 HS, Port1 FS - #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) #define TUP_DCD_ENDPOINT_MAX 5 @@ -78,12 +70,28 @@ // TODO USB0 has 5, USB1 has 6 #define TUP_DCD_ENDPOINT_MAX 6 +#elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) + // USB0 has 6 with HS PHY, USB1 has 4 only FS + #define TUP_USBIP_CHIPIDEA_HS + #define TUP_USBIP_EHCI + + #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_RHPORT_HIGHSPEED 1 + +#elif TU_CHECK_MCU(OPT_MCU_MCXN9) + // NOTE: MCXN943 port 1 use chipidea HS, port 0 use chipidea FS + #define TUP_USBIP_CHIPIDEA_HS + #define TUP_USBIP_EHCI + + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 + #elif TU_CHECK_MCU(OPT_MCU_MIMXRT) #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 // Port0 HS, Port1 HS + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32) #define TUP_USBIP_CHIPIDEA_FS diff --git a/src/device/dcd.h b/src/device/dcd.h index 00419ff05..f82b8633d 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -102,6 +102,22 @@ typedef struct TU_ATTR_ALIGNED(4) //TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct"); +//--------------------------------------------------------------------+ +// Memory API +//--------------------------------------------------------------------+ + +// clean/flush data cache: write cache -> memory. +// Required before an DMA TX transfer to make sure data is in memory +void dcd_dcache_clean(void* addr, uint32_t data_size) TU_ATTR_WEAK; + +// invalidate data cache: mark cache as invalid, next read will read from memory +// Required BOTH before and after an DMA RX transfer +void dcd_dcache_invalidate(void* addr, uint32_t data_size) TU_ATTR_WEAK; + +// clean and invalidate data cache +// Required before an DMA transfer where memory is both read/write by DMA +void dcd_dcache_clean_invalidate(void* addr, uint32_t data_size) TU_ATTR_WEAK; + //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index 607926a65..ceff893bd 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -46,18 +46,44 @@ static const ci_hs_controller_t _ci_controller[] = { // RT1010 and RT1020 only has 1 USB controller #if FSL_FEATURE_SOC_USBHS_COUNT == 1 - { .reg_base = USB_BASE , .irqnum = USB_OTG1_IRQn, .ep_count = 8 } + { .reg_base = USB_BASE , .irqnum = USB_OTG1_IRQn } #else - { .reg_base = USB1_BASE, .irqnum = USB_OTG1_IRQn, .ep_count = 8 }, - { .reg_base = USB2_BASE, .irqnum = USB_OTG2_IRQn, .ep_count = 8 } + { .reg_base = USB1_BASE, .irqnum = USB_OTG1_IRQn}, + { .reg_base = USB2_BASE, .irqnum = USB_OTG2_IRQn} #endif }; +#define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) + +//------------- DCD -------------// #define CI_DCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) #define CI_DCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) +//------------- HCD -------------// #define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) #define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) +//------------- DCache -------------// +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_is_cache_mem(uint32_t addr) { + return !(0x20000000 <= addr && addr < 0x20100000); +} + +TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean(void* addr, uint32_t data_size) { + if (imxrt_is_cache_mem((uint32_t) addr)) { + SCB_CleanDCache_by_Addr((uint32_t *) addr, (int32_t) data_size); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_invalidate(void* addr, uint32_t data_size) { + if (imxrt_is_cache_mem((uint32_t) addr)) { + SCB_InvalidateDCache_by_Addr(addr, (int32_t) data_size); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean_invalidate(void* addr, uint32_t data_size) { + if (imxrt_is_cache_mem((uint32_t) addr)) { + SCB_CleanInvalidateDCache_by_Addr(addr, (int32_t) data_size); + } +} #endif diff --git a/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h b/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h index 8c2e7dfa6..2e84c93e7 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h +++ b/src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h @@ -32,10 +32,12 @@ static const ci_hs_controller_t _ci_controller[] = { - { .reg_base = LPC_USB0_BASE, .irqnum = USB0_IRQn, .ep_count = 6 }, - { .reg_base = LPC_USB1_BASE, .irqnum = USB1_IRQn, .ep_count = 4 } + { .reg_base = LPC_USB0_BASE, .irqnum = USB0_IRQn }, + { .reg_base = LPC_USB1_BASE, .irqnum = USB1_IRQn } }; +#define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) + #define CI_DCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) #define CI_DCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) diff --git a/src/portable/chipidea/ci_hs/ci_hs_mcx.h b/src/portable/chipidea/ci_hs/ci_hs_mcx.h new file mode 100644 index 000000000..f940f4a9d --- /dev/null +++ b/src/portable/chipidea/ci_hs/ci_hs_mcx.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CI_HS_MCX_H_ +#define _CI_HS_MCX_H_ + +#include "fsl_device_registers.h" + +// NOTE: MCX N9 has 2 different USB Controller +// - USB0 is KHCI FullSpeed +// - USB1 is ChipIdea HighSpeed, therefore rhport = 1 is actually index 0 + +static const ci_hs_controller_t _ci_controller[] = { + {.reg_base = USBHS1__USBC_BASE, .irqnum = USB1_HS_IRQn} +}; + +TU_ATTR_ALWAYS_INLINE static inline ci_hs_regs_t* CI_HS_REG(uint8_t port) { + (void) port; + return ((ci_hs_regs_t*) _ci_controller[0].reg_base); +} + +#define CI_DCD_INT_ENABLE(_p) do { (void) _p; NVIC_EnableIRQ (_ci_controller[0].irqnum); } while (0) +#define CI_DCD_INT_DISABLE(_p) do { (void) _p; NVIC_DisableIRQ(_ci_controller[0].irqnum); } while (0) + +#define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) +#define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) + + +#endif diff --git a/src/portable/chipidea/ci_hs/ci_hs_type.h b/src/portable/chipidea/ci_hs/ci_hs_type.h index 31b5a012d..2f3aa3694 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_type.h +++ b/src/portable/chipidea/ci_hs/ci_hs_type.h @@ -31,13 +31,21 @@ extern "C" { #endif +// DCCPARAMS +enum { + DCCPARAMS_DEN_MASK = 0x1Fu, ///< DEN bit 4:0 +}; + // USBCMD enum { USBCMD_RUN_STOP = TU_BIT(0), USBCMD_RESET = TU_BIT(1), USBCMD_SETUP_TRIPWIRE = TU_BIT(13), - USBCMD_ADD_QTD_TRIPWIRE = TU_BIT(14) ///< This bit is used as a semaphore to ensure the to proper addition of a new dTD to an active (primed) endpoint’s linked list. This bit is set and cleared by software during the process of adding a new dTD -// Interrupt Threshold bit 23:16 + USBCMD_ADD_QTD_TRIPWIRE = TU_BIT(14), // This bit is used as a semaphore to ensure the to proper addition of a + // new dTD to an active (primed) endpoint’s linked list. This bit is set and + // cleared by software during the process of adding a new dTD + + USBCMD_INTR_THRESHOLD_MASK = 0x00FF0000u, // Interrupt Threshold bit 23:16 }; // PORTSC1 @@ -72,6 +80,7 @@ enum { // USBMode enum { + USBMOD_CM_MASK = TU_BIT(0) | TU_BIT(1), USBMODE_CM_DEVICE = 2, USBMODE_CM_HOST = 3, @@ -134,7 +143,6 @@ typedef struct { uint32_t reg_base; uint32_t irqnum; - uint8_t ep_count; // Max bi-directional Endpoints }ci_hs_controller_t; #ifdef __cplusplus diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 9be79a2f1..850c82e43 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -28,34 +28,52 @@ #if CFG_TUD_ENABLED && defined(TUP_USBIP_CHIPIDEA_HS) -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ #include "device/dcd.h" #include "ci_hs_type.h" #if CFG_TUSB_MCU == OPT_MCU_MIMXRT #include "ci_hs_imxrt.h" -#elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) + + void dcd_dcache_clean(void* addr, uint32_t data_size) { + imxrt_dcache_clean(addr, data_size); + } + + void dcd_dcache_invalidate(void* addr, uint32_t data_size) { + imxrt_dcache_invalidate(addr, data_size); + } + + void dcd_dcache_clean_invalidate(void* addr, uint32_t data_size) { + imxrt_dcache_clean_invalidate(addr, data_size); + } + +#else + +#if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) #include "ci_hs_lpc18_43.h" + +#elif TU_CHECK_MCU(OPT_MCU_MCXN9) + // MCX N9 only port 1 use this controller + #include "ci_hs_mcx.h" #else #error "Unsupported MCUs" #endif -//--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF -//--------------------------------------------------------------------+ + TU_ATTR_WEAK void dcd_dcache_clean(void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + } -#define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) + TU_ATTR_WEAK void dcd_dcache_invalidate(void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + } -// Clean means to push any cached changes to RAM and invalidate "removes" the -// entry from the cache. -#if defined(__CORTEX_M) && __CORTEX_M == 7 && __DCACHE_PRESENT == 1 - #define CleanInvalidateDCache_by_Addr SCB_CleanInvalidateDCache_by_Addr -#else - #define CleanInvalidateDCache_by_Addr(_addr, _dsize) + TU_ATTR_WEAK void dcd_dcache_clean_invalidate(void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + } #endif +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF +//--------------------------------------------------------------------+ // ENDPTCTRL enum { @@ -160,6 +178,16 @@ typedef struct { CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048) static dcd_data_t _dcd_data; +//--------------------------------------------------------------------+ +// Prototypes and Helper Functions +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE +static inline uint8_t ci_ep_count(ci_hs_regs_t const* dcd_reg) +{ + return dcd_reg->DCCPARAMS & DCCPARAMS_DEN_MASK; +} + //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ @@ -174,7 +202,8 @@ static void bus_reset(uint8_t rhport) // endpoint type of the unused direction must be changed from the control type to any other // type (e.g. bulk). Leaving an un-configured endpoint control will cause undefined behavior // for the data PID tracking on the active endpoint. - for( uint8_t i=1; i < _ci_controller[rhport].ep_count; i++) + uint8_t const ep_count = ci_ep_count(dcd_reg); + for( uint8_t i=1; i < ep_count; i++) { dcd_reg->ENDPTCTRL[i] = (TUSB_XFER_BULK << ENDPTCTRL_TYPE_POS) | (TUSB_XFER_BULK << (16+ENDPTCTRL_TYPE_POS)); } @@ -202,7 +231,7 @@ static void bus_reset(uint8_t rhport) _dcd_data.qhd[0][0].int_on_setup = 1; // OUT only - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); } void dcd_init(uint8_t rhport) @@ -211,26 +240,34 @@ void dcd_init(uint8_t rhport) ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); + TU_ASSERT(ci_ep_count(dcd_reg) <= TUP_DCD_ENDPOINT_MAX, ); + // Reset controller dcd_reg->USBCMD |= USBCMD_RESET; while( dcd_reg->USBCMD & USBCMD_RESET ) {} // Set mode to device, must be set immediately after reset - dcd_reg->USBMODE = USBMODE_CM_DEVICE; + uint32_t usbmode = dcd_reg->USBMODE & ~USBMOD_CM_MASK; + usbmode |= USBMODE_CM_DEVICE; + dcd_reg->USBMODE = usbmode; + dcd_reg->OTGSC = OTGSC_VBUS_DISCHARGE | OTGSC_OTG_TERMINATION; #if !TUD_OPT_HIGH_SPEED dcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; #endif - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); dcd_reg->ENDPTLISTADDR = (uint32_t) _dcd_data.qhd; // Endpoint List Address has to be 2K alignment dcd_reg->USBSTS = dcd_reg->USBSTS; dcd_reg->USBINTR = INTR_USB | INTR_ERROR | INTR_PORT_CHANGE | INTR_SUSPEND; - dcd_reg->USBCMD &= ~0x00FF0000; // Interrupt Threshold Interval = 0 - dcd_reg->USBCMD |= USBCMD_RUN_STOP; // Connect + uint32_t usbcmd = dcd_reg->USBCMD; + usbcmd &= ~USBCMD_INTR_THRESHOLD_MASK; // Interrupt Threshold Interval = 0 + usbcmd |= USBCMD_RUN_STOP; // run + + dcd_reg->USBCMD = usbcmd; } void dcd_int_enable(uint8_t rhport) @@ -286,7 +323,7 @@ static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) { // Force the CPU to flush the buffer. We increase the size by 31 because the call aligns the // address to 32-byte boundaries. Buffer must be word aligned - CleanInvalidateDCache_by_Addr((uint32_t*) tu_align((uint32_t) data_ptr, 4), total_bytes + 31); + dcd_dcache_clean_invalidate((uint32_t*) tu_align((uint32_t) data_ptr, 4), total_bytes + 31); tu_memclr(p_qtd, sizeof(dcd_qtd_t)); @@ -343,8 +380,10 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) uint8_t const epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress); uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); + ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); + // Must not exceed max endpoint number - TU_ASSERT( epnum < _ci_controller[rhport].ep_count ); + TU_ASSERT(epnum < ci_ep_count(dcd_reg)); //------------- Prepare Queue Head -------------// dcd_qhd_t * p_qhd = &_dcd_data.qhd[epnum][dir]; @@ -359,11 +398,9 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) p_qhd->qtd_overlay.next = QTD_NEXT_INVALID; - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); // Enable EP Control - ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); - uint32_t const epctrl = (p_endpoint_desc->bmAttributes.xfer << ENDPTCTRL_TYPE_POS) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; if ( dir == TUSB_DIR_OUT ) @@ -382,7 +419,8 @@ void dcd_edpt_close_all (uint8_t rhport) ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); // Disable all non-control endpoints - for( uint8_t epnum=1; epnum < _ci_controller[rhport].ep_count; epnum++) + uint8_t const ep_count = ci_ep_count(dcd_reg); + for (uint8_t epnum = 1; epnum < ep_count; epnum++) { _dcd_data.qhd[epnum][TUSB_DIR_OUT].qtd_overlay.halted = 1; _dcd_data.qhd[epnum][TUSB_DIR_IN ].qtd_overlay.halted = 1; @@ -420,7 +458,7 @@ static void qhd_start_xfer(uint8_t rhport, uint8_t epnum, uint8_t dir) p_qhd->qtd_overlay.next = (uint32_t) p_qtd; // link qtd to qhd // flush cache - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); if ( epnum == 0 ) { @@ -498,7 +536,7 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 } } - CleanInvalidateDCache_by_Addr((uint32_t*) tu_align((uint32_t) fifo_info.ptr_wrap, 4), total_bytes - fifo_info.len_wrap + 31); + dcd_dcache_clean_invalidate((uint32_t*) tu_align((uint32_t) fifo_info.ptr_wrap, 4), total_bytes - fifo_info.len_wrap + 31); } else { @@ -611,7 +649,7 @@ void dcd_int_handler(uint8_t rhport) if (int_status & INTR_USB) { // Make sure we read the latest version of _dcd_data. - CleanInvalidateDCache_by_Addr((uint32_t*) &_dcd_data, sizeof(dcd_data_t)); + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); uint32_t const edpt_complete = dcd_reg->ENDPTCOMPLETE; dcd_reg->ENDPTCOMPLETE = edpt_complete; // acknowledge diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index ab6a42e11..8c27abbf6 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -42,28 +42,17 @@ #if CFG_TUSB_MCU == OPT_MCU_MIMXRT #include "ci_hs_imxrt.h" - // check if memory is cacheable i.e not in DTCM - TU_ATTR_ALWAYS_INLINE static inline bool is_cache_mem(uint32_t addr) { - return !(0x20000000 <= addr && addr < 0x20100000); - } - void hcd_dcache_clean(void* addr, uint32_t data_size) { - if (is_cache_mem((uint32_t) addr)) { - SCB_CleanDCache_by_Addr((uint32_t *) addr, (int32_t) data_size); - } + imxrt_dcache_clean(addr, data_size); } void hcd_dcache_invalidate(void* addr, uint32_t data_size) { - if (is_cache_mem((uint32_t) addr)) { - SCB_InvalidateDCache_by_Addr(addr, (int32_t) data_size); - } + imxrt_dcache_invalidate(addr, data_size); } -void hcd_dcache_clean_invalidate(void* addr, uint32_t data_size) { - if (is_cache_mem((uint32_t) addr)) { - SCB_CleanInvalidateDCache_by_Addr(addr, (int32_t) data_size); + void hcd_dcache_clean_invalidate(void* addr, uint32_t data_size) { + imxrt_dcache_clean_invalidate(addr, data_size); } -} #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) #include "ci_hs_lpc18_43.h" @@ -75,8 +64,6 @@ void hcd_dcache_clean_invalidate(void* addr, uint32_t data_size) { // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -#define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) - //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 852e7f4fe..2b25eee9d 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -163,22 +163,15 @@ static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t static inline ehci_link_t* list_next (ehci_link_t const *p_link); TU_ATTR_WEAK void hcd_dcache_clean(void* addr, uint32_t data_size) { - (void) addr; - (void) data_size; + (void) addr; (void) data_size; } -// invalidate data cache: mark cache as invalid, next read will read from memory -// Required BOTH before and after an DMA RX transfer TU_ATTR_WEAK void hcd_dcache_invalidate(void* addr, uint32_t data_size) { - (void) addr; - (void) data_size; + (void) addr; (void) data_size; } -// clean and invalidate data cache -// Required before an DMA transfer where memory is both read/write by DMA TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void* addr, uint32_t data_size) { - (void) addr; - (void) data_size; + (void) addr; (void) data_size; } //--------------------------------------------------------------------+ diff --git a/src/tusb_option.h b/src/tusb_option.h index 4f3f3a985..948c9edf3 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -166,6 +166,10 @@ // WCH #define OPT_MCU_CH32V307 2200 ///< WCH CH32V307 + +// NXP LPC MCX +#define OPT_MCU_MCXN9 2300 ///< NXP MCX N9 Series + // Helper to check if configured MCU is one of listed // Apply _TU_CHECK_MCU with || as separator to list of input #define _TU_CHECK_MCU(_m) (CFG_TUSB_MCU == _m) @@ -274,7 +278,7 @@ // In case TUP_MCU_STRICT_ALIGN = 1 and TUP_ARCH_STRICT_ALIGN =0, we will not reply on compiler // to generate unaligned access code. // LPC_IP3511 Highspeed cannot access unaligned memory on USB_RAM -#if TUD_OPT_HIGH_SPEED && (CFG_TUSB_MCU == OPT_MCU_LPC54XXX || CFG_TUSB_MCU == OPT_MCU_LPC55XX) +#if TUD_OPT_HIGH_SPEED && TU_CHECK_MCU(OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX) #define TUP_MCU_STRICT_ALIGN 1 #else #define TUP_MCU_STRICT_ALIGN 0 diff --git a/tools/cmake/cpu/cortex-m3.cmake b/tools/cmake/cpu/cortex-m3.cmake new file mode 100644 index 000000000..b740ee44c --- /dev/null +++ b/tools/cmake/cpu/cortex-m3.cmake @@ -0,0 +1,10 @@ +if (TOOLCHAIN STREQUAL "gcc") + list(APPEND TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m3 + ) + + set(FREERTOS_PORT GCC_ARM_CM3 CACHE INTERNAL "") +else () + # TODO support IAR +endif () diff --git a/tools/cmake/cpu/cortex-m33.cmake b/tools/cmake/cpu/cortex-m33.cmake index fbd5027b1..26c91a64f 100644 --- a/tools/cmake/cpu/cortex-m33.cmake +++ b/tools/cmake/cpu/cortex-m33.cmake @@ -3,10 +3,11 @@ if (TOOLCHAIN STREQUAL "gcc") -mthumb -mcpu=cortex-m33 -mfloat-abi=hard - -mfpu=fpv5-d16 + #-mfpu=fpv5-d16 + -mfpu=fpv5-sp-d16 ) - set(FREERTOS_PORT GCC_ARM_CM33_NONSECURE CACHE INTERNAL "") + set(FREERTOS_PORT GCC_ARM_CM33_NTZ_NONSECURE CACHE INTERNAL "") else () # TODO support IAR endif () diff --git a/tools/cmake/toolchain/arm_gcc.cmake b/tools/cmake/toolchain/arm_gcc.cmake index c7b6cff98..5f25d637b 100644 --- a/tools/cmake/toolchain/arm_gcc.cmake +++ b/tools/cmake/toolchain/arm_gcc.cmake @@ -3,6 +3,8 @@ set(CMAKE_SYSTEM_NAME Generic) set(CMAKE_ASM_COMPILER "arm-none-eabi-gcc") set(CMAKE_C_COMPILER "arm-none-eabi-gcc") set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") + +set(TOOLCHAIN_SIZE "arm-none-eabi-size" CACHE INTERNAL "") set(GCC_ELF2BIN "arm-none-eabi-objcopy") set_property(GLOBAL PROPERTY ELF2BIN ${GCC_ELF2BIN}) diff --git a/tools/get_deps.py b/tools/get_deps.py index be5738dc1..f499562cb 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -24,7 +24,7 @@ deps_optional = { 'hw/mcu/nordic/nrfx' : ['2527e3c8449cfd38aee41598e8af8492f410ed15', 'https://github.com/NordicSemiconductor/nrfx.git' ], 'hw/mcu/nuvoton' : ['2204191ec76283371419fbcec207da02e1bc22fa', 'https://github.com/majbthrd/nuc_driver.git' ], 'hw/mcu/nxp/lpcopen' : ['43c45c85405a5dd114fff0ea95cca62837740c13', 'https://github.com/hathach/nxp_lpcopen.git' ], - 'hw/mcu/nxp/mcux-sdk' : ['f357a1150f6cf6c6b844f53f2d426bfb3e649850', 'https://github.com/NXPmicro/mcux-sdk.git' ], + 'hw/mcu/nxp/mcux-sdk' : ['950819b7de9b32f92c3edf396bc5ffb8d66e7009', 'https://github.com/hathach/mcux-sdk.git' ], 'hw/mcu/nxp/nxp_sdk' : ['845c8fc49b6fb660f06a5c45225494eacb06f00c', 'https://github.com/hathach/nxp_sdk.git' ], 'hw/mcu/raspberry_pi/Pico-PIO-USB' : ['c3715ce94b6f6391856de56081d4d9b3e98fa93d', 'https://github.com/sekigon-gonnoc/Pico-PIO-USB.git' ], 'hw/mcu/renesas/fsp' : ['8dc14709f2a6518b43f71efad70d900b7718d9f1', 'https://github.com/renesas/fsp.git' ], diff --git a/tools/make/cpu/cortex-m33.mk b/tools/make/cpu/cortex-m33.mk index 2ea3a0753..3d12b01fd 100644 --- a/tools/make/cpu/cortex-m33.mk +++ b/tools/make/cpu/cortex-m33.mk @@ -3,7 +3,9 @@ ifeq ($(TOOLCHAIN),gcc) -mthumb \ -mcpu=cortex-m33 \ -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ + -mfpu=fpv5-sp-d16 \ + + #-mfpu=fpv5-d16 \ #set(FREERTOS_PORT GCC_ARM_CM33_NONSECURE CACHE INTERNAL "") FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure -- cgit v1.3.1 From b262164a35e9e305b67cb8d0c2188353db405200 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 26 May 2023 15:16:18 +0700 Subject: fix build with net_lwip_webserver example --- examples/device/CMakeLists.txt | 7 +- examples/device/net_lwip_webserver/CMakeLists.txt | 148 +++++++++++----------- src/CMakeLists.txt | 2 + 3 files changed, 80 insertions(+), 77 deletions(-) (limited to 'examples/device') diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 89cfceeeb..5b077a5e1 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -22,12 +22,7 @@ family_add_subdirectory(hid_generic_inout) family_add_subdirectory(hid_multiple_interface) family_add_subdirectory(midi_test) family_add_subdirectory(msc_dual_lun) - -# FIXME temp skip net_lwip_webserver for imxrt for now -if (NOT ${FAMILY} STREQUAL "imxrt" AND NOT ${FAMILY} STREQUAL "mcx") - family_add_subdirectory(net_lwip_webserver) -endif() - +family_add_subdirectory(net_lwip_webserver) family_add_subdirectory(uac2_headset) family_add_subdirectory(usbtmc) family_add_subdirectory(video_capture) diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index e7338c809..5225f7c42 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -1,83 +1,89 @@ cmake_minimum_required(VERSION 3.17) -set(TOP "../../..") -get_filename_component(TOP "${TOP}" REALPATH) +include(${CMAKE_CURRENT_LIST_DIR}/../../../hw/bsp/family_support.cmake) -if (EXISTS ${TOP}/lib/lwip/src) - include(${TOP}/hw/bsp/family_support.cmake) +set(LWIP ${TOP}/lib/lwip) +if (NOT EXISTS ${LWIP}/src) + MESSAGE(WARNING "lib/lwip submodule not found, please run 'python tools/get_deps.py lib/lwip' to fetch it") + return() +endif() - # gets PROJECT name for the example (e.g. -) - family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - project(${PROJECT} C CXX ASM) +project(${PROJECT} C CXX ASM) - # Checks this example is valid for the family and initializes the project - family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) - add_executable(${PROJECT}) +add_executable(${PROJECT}) - # Example source - target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_LIST_DIR}/src/main.c + ${CMAKE_CURRENT_LIST_DIR}/src/usb_descriptors.c + ) - # Example include - target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ${TOP}/lib/lwip/src/include - ${TOP}/lib/lwip/src/include/ipv4 - ${TOP}/lib/lwip/src/include/lwip/apps - ${TOP}/lib/networking - ) +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_LIST_DIR}/src + ${LWIP}/src/include + ${LWIP}/src/include/ipv4 + ${LWIP}/src/include/lwip/apps + ${TOP}/lib/networking + ) - target_sources(${PROJECT} PUBLIC - ${TOP}/lib/lwip/src/core/altcp.c - ${TOP}/lib/lwip/src/core/altcp_alloc.c - ${TOP}/lib/lwip/src/core/altcp_tcp.c - ${TOP}/lib/lwip/src/core/def.c - ${TOP}/lib/lwip/src/core/dns.c - ${TOP}/lib/lwip/src/core/inet_chksum.c - ${TOP}/lib/lwip/src/core/init.c - ${TOP}/lib/lwip/src/core/ip.c - ${TOP}/lib/lwip/src/core/mem.c - ${TOP}/lib/lwip/src/core/memp.c - ${TOP}/lib/lwip/src/core/netif.c - ${TOP}/lib/lwip/src/core/pbuf.c - ${TOP}/lib/lwip/src/core/raw.c - ${TOP}/lib/lwip/src/core/stats.c - ${TOP}/lib/lwip/src/core/sys.c - ${TOP}/lib/lwip/src/core/tcp.c - ${TOP}/lib/lwip/src/core/tcp_in.c - ${TOP}/lib/lwip/src/core/tcp_out.c - ${TOP}/lib/lwip/src/core/timeouts.c - ${TOP}/lib/lwip/src/core/udp.c - ${TOP}/lib/lwip/src/core/ipv4/autoip.c - ${TOP}/lib/lwip/src/core/ipv4/dhcp.c - ${TOP}/lib/lwip/src/core/ipv4/etharp.c - ${TOP}/lib/lwip/src/core/ipv4/icmp.c - ${TOP}/lib/lwip/src/core/ipv4/igmp.c - ${TOP}/lib/lwip/src/core/ipv4/ip4.c - ${TOP}/lib/lwip/src/core/ipv4/ip4_addr.c - ${TOP}/lib/lwip/src/core/ipv4/ip4_frag.c - ${TOP}/lib/lwip/src/netif/ethernet.c - ${TOP}/lib/lwip/src/netif/slipif.c - ${TOP}/lib/lwip/src/apps/http/httpd.c - ${TOP}/lib/lwip/src/apps/http/fs.c - ${TOP}/lib/networking/dhserver.c - ${TOP}/lib/networking/dnserver.c - ${TOP}/lib/networking/rndis_reports.c - ) +# lib/networking sources +target_sources(${PROJECT} PUBLIC + ${TOP}/lib/networking/dhserver.c + ${TOP}/lib/networking/dnserver.c + ${TOP}/lib/networking/rndis_reports.c + ) - # due to warnings from other net source, we need to prevent error from some of the warnings options - target_compile_options(${PROJECT} PUBLIC - -Wno-error=null-dereference - -Wno-error=conversion - -Wno-error=sign-conversion - -Wno-error=sign-compare - ) +# lwip sources +target_sources(${PROJECT} PUBLIC + ${LWIP}/src/core/altcp.c + ${LWIP}/src/core/altcp_alloc.c + ${LWIP}/src/core/altcp_tcp.c + ${LWIP}/src/core/def.c + ${LWIP}/src/core/dns.c + ${LWIP}/src/core/inet_chksum.c + ${LWIP}/src/core/init.c + ${LWIP}/src/core/ip.c + ${LWIP}/src/core/mem.c + ${LWIP}/src/core/memp.c + ${LWIP}/src/core/netif.c + ${LWIP}/src/core/pbuf.c + ${LWIP}/src/core/raw.c + ${LWIP}/src/core/stats.c + ${LWIP}/src/core/sys.c + ${LWIP}/src/core/tcp.c + ${LWIP}/src/core/tcp_in.c + ${LWIP}/src/core/tcp_out.c + ${LWIP}/src/core/timeouts.c + ${LWIP}/src/core/udp.c + ${LWIP}/src/core/ipv4/autoip.c + ${LWIP}/src/core/ipv4/dhcp.c + ${LWIP}/src/core/ipv4/etharp.c + ${LWIP}/src/core/ipv4/icmp.c + ${LWIP}/src/core/ipv4/igmp.c + ${LWIP}/src/core/ipv4/ip4.c + ${LWIP}/src/core/ipv4/ip4_addr.c + ${LWIP}/src/core/ipv4/ip4_frag.c + ${LWIP}/src/netif/ethernet.c + ${LWIP}/src/netif/slipif.c + ${LWIP}/src/apps/http/httpd.c + ${LWIP}/src/apps/http/fs.c + ) - # Configure compilation flags and libraries for the example... see the corresponding function - # in hw/bsp/FAMILY/family.cmake for details. - family_configure_device_example(${PROJECT}) -endif() +# due to warnings from other net source, we need to prevent error from some of the warnings options +target_compile_options(${PROJECT} PUBLIC + -Wno-error=null-dereference + -Wno-error=conversion + -Wno-error=sign-conversion + -Wno-error=sign-compare + ) + +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT}) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 0b99d8919..0d2f0975b 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -34,6 +34,8 @@ function(add_tinyusb TARGET) ) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + # TODO for net driver, should be removed/changed + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../lib/networking ) # enable all possible warnings target_compile_options(${TARGET} PUBLIC -- cgit v1.3.1 From fcf77914546496d88d5915223095d93bb63c67fe Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 2 Jun 2023 13:27:18 +0700 Subject: add IAR support for G0 with cmake --- examples/device/net_lwip_webserver/CMakeLists.txt | 16 +-- hw/bsp/family_support.cmake | 108 +++++++++++---------- hw/bsp/imxrt/family.cmake | 4 +- hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake | 2 +- hw/bsp/lpc18/boards/mcb1800/board.cmake | 2 +- hw/bsp/lpc18/family.cmake | 2 +- hw/bsp/lpc55/boards/double_m33_express/board.cmake | 2 +- hw/bsp/lpc55/family.cmake | 4 +- hw/bsp/nrf/boards/pca10056/board.cmake | 2 +- hw/bsp/nrf/boards/pca10095/board.cmake | 2 +- hw/bsp/nrf/family.cmake | 4 +- hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake | 8 +- hw/bsp/stm32g0/family.cmake | 86 ++++++++-------- hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake | 8 +- hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake | 8 +- hw/bsp/stm32g4/family.cmake | 4 +- src/CMakeLists.txt | 2 + tools/cmake/cpu/cortex-m0plus.cmake | 12 ++- tools/cmake/toolchain/arm_gcc.cmake | 14 ++- tools/cmake/toolchain/arm_iar.cmake | 34 +++++++ tools/cmake/toolchain/set_flags.cmake | 17 +--- 21 files changed, 196 insertions(+), 145 deletions(-) create mode 100644 tools/cmake/toolchain/arm_iar.cmake (limited to 'examples/device') diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 5225f7c42..2c21aa52b 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -77,12 +77,16 @@ target_sources(${PROJECT} PUBLIC ) # due to warnings from other net source, we need to prevent error from some of the warnings options -target_compile_options(${PROJECT} PUBLIC - -Wno-error=null-dereference - -Wno-error=conversion - -Wno-error=sign-conversion - -Wno-error=sign-compare - ) +if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${PROJECT} PUBLIC + -Wno-error=null-dereference + -Wno-error=conversion + -Wno-error=sign-conversion + -Wno-error=sign-compare + ) +elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + +endif () # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index fdc9580ae..e801f0116 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -97,53 +97,6 @@ function(family_initialize_project PROJECT DIR) endfunction() -function(family_add_default_example_warnings TARGET) - target_compile_options(${TARGET} PUBLIC - -Wall - -Wextra - -Werror - -Wfatal-errors - -Wdouble-promotion - -Wfloat-equal - -Wshadow - -Wwrite-strings - -Wsign-compare - -Wmissing-format-attribute - -Wunreachable-code - -Wcast-align - -Wcast-qual - -Wnull-dereference - -Wuninitialized - -Wunused - -Wredundant-decls - #-Wstrict-prototypes - #-Werror-implicit-function-declaration - #-Wundef - ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0) - target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") - endif() - - # GCC 10 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) - target_compile_options(${TARGET} PUBLIC -Wconversion) - endif() - - # GCC 8 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) - target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) - endif() - - # GCC 6 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) - target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) - endif() - endif() -endfunction() - - #------------------------------------ # Main target configure #------------------------------------ @@ -155,11 +108,13 @@ function(family_configure_common TARGET) COMMAND ${CMAKE_SIZE} $ ) - # Generate map file - target_link_options(${TARGET} PUBLIC - # link map - "LINKER:-Map=$.map" - ) + if (CMAKE_C_COMPILER_ID STREQUAL "GCC") + # Generate map file + target_link_options(${TARGET} PUBLIC + # link map + "LINKER:-Map=$.map" + ) + endif() endfunction() @@ -198,7 +153,7 @@ function(family_add_freertos TARGET) # freeros config if (NOT TARGET freertos_config) add_library(freertos_config INTERFACE) - target_include_directories(freertos_config SYSTEM INTERFACE + target_include_directories(freertos_config INTERFACE ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig ) endif() @@ -223,6 +178,53 @@ function(family_add_freertos TARGET) endfunction() +function(family_add_default_example_warnings TARGET) + target_compile_options(${TARGET} PUBLIC + -Wall + -Wextra + -Werror + -Wfatal-errors + -Wdouble-promotion + -Wfloat-equal + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wredundant-decls + #-Wstrict-prototypes + #-Werror-implicit-function-declaration + #-Wundef + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0) + target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") + endif() + + # GCC 10 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) + target_compile_options(${TARGET} PUBLIC -Wconversion) + endif() + + # GCC 8 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) + target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) + endif() + + # GCC 6 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) + target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) + endif() + endif() +endfunction() + + # Add bin/hex output function(family_add_bin_hex TARGET) add_custom_command(TARGET ${TARGET} POST_BUILD diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 3c156285c..b5d47614e 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -53,7 +53,7 @@ if (NOT TARGET ${BOARD_TARGET}) update_board(${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${TOOLCHAIN}) - set(LD_FILE_gcc ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) + set(LD_FILE_GCC ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) endif () if (TOOLCHAIN STREQUAL "gcc") @@ -61,7 +61,7 @@ if (NOT TARGET ${BOARD_TARGET}) ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S ) target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_gcc}" + "LINKER:--script=${LD_FILE_GCC}" # nanolib --specs=nosys.specs --specs=nano.specs diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake index b540012a4..00686ca01 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake @@ -4,7 +4,7 @@ set(JLINK_DEVICE LPC18S37) set(PYOCD_TARGET LPC18S37) set(NXPLINK_DEVICE LPC18S37:LPCXPRESSO18S37) -set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/lpc1837.ld) +set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/lpc1837.ld) function(update_board TARGET) # nothing to do diff --git a/hw/bsp/lpc18/boards/mcb1800/board.cmake b/hw/bsp/lpc18/boards/mcb1800/board.cmake index 1efeafd12..cfc2739e3 100644 --- a/hw/bsp/lpc18/boards/mcb1800/board.cmake +++ b/hw/bsp/lpc18/boards/mcb1800/board.cmake @@ -4,7 +4,7 @@ set(JLINK_DEVICE LPC1857) set(PYOCD_TARGET LPC1857) set(NXPLINK_DEVICE LPC1857:MCB1857) -set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/lpc1857.ld) +set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/lpc1857.ld) function(update_board TARGET) # nothing to do diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index a133e7217..38b0f61fc 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -48,7 +48,7 @@ if (NOT TARGET ${BOARD_TARGET}) if (TOOLCHAIN STREQUAL "gcc") target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_gcc}" + "LINKER:--script=${LD_FILE_GCC}" # nanolib --specs=nosys.specs --specs=nano.specs diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.cmake b/hw/bsp/lpc55/boards/double_m33_express/board.cmake index 7c46c075e..62b0993dc 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.cmake +++ b/hw/bsp/lpc55/boards/double_m33_express/board.cmake @@ -5,7 +5,7 @@ set(JLINK_DEVICE LPC55S69) set(PYOCD_TARGET LPC55S69) set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) -set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld) +set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 25eed48de..967ed3fa6 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -65,7 +65,7 @@ if (NOT TARGET ${BOARD_TARGET}) update_board(${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${TOOLCHAIN}) - set(LD_FILE_gcc ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + set(LD_FILE_GCC ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) endif () if (TOOLCHAIN STREQUAL "gcc") @@ -74,7 +74,7 @@ if (NOT TARGET ${BOARD_TARGET}) ) target_link_options(${BOARD_TARGET} PUBLIC # linker file - "LINKER:--script=${LD_FILE_gcc}" + "LINKER:--script=${LD_FILE_GCC}" # nanolib --specs=nosys.specs --specs=nano.specs diff --git a/hw/bsp/nrf/boards/pca10056/board.cmake b/hw/bsp/nrf/boards/pca10056/board.cmake index cc8ef2fcb..3137c4fcd 100644 --- a/hw/bsp/nrf/boards/pca10056/board.cmake +++ b/hw/bsp/nrf/boards/pca10056/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT nrf52840) -set(LD_FILE_gcc ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) +set(LD_FILE_GCC ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index e90d76e91..a0562c738 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT nrf5340_application) -set(LD_FILE_gcc ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) +set(LD_FILE_GCC ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 2c5d7a431..e94aeb9bd 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -55,7 +55,7 @@ if (NOT TARGET ${BOARD_TARGET}) update_board(${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${TOOLCHAIN}) - set(LD_FILE_gcc ${NRFX_DIR}/mdk/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_GCC ${NRFX_DIR}/mdk/${MCU_VARIANT}_xxaa.ld) endif () if (TOOLCHAIN STREQUAL "gcc") @@ -64,7 +64,7 @@ if (NOT TARGET ${BOARD_TARGET}) ) target_link_options(${BOARD_TARGET} PUBLIC # linker file - "LINKER:--script=${LD_FILE_gcc}" + "LINKER:--script=${LD_FILE_GCC}" -L${NRFX_DIR}/mdk # nanolib --specs=nosys.specs diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake index c9f2a9c8e..145490921 100644 --- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake +++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake @@ -1,11 +1,11 @@ #set(MCU_VARIANT MIMXRT1011) set(JLINK_DEVICE STM32G0B1RE) -set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/STM32G0B1RETx_FLASH.ld) -set(LD_FILE_iar ${ST_CMSIS}/Source/Templates/iar/linker/stm32g0b1xx_flash.icf) +set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/STM32G0B1RETx_FLASH.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/stm32g0b1xx_flash.icf) -set(STARTUP_FILE_gcc ${ST_CMSIS}/Source/Templates/gcc/startup_stm32g0b1xx.s) -set(STARTUP_FILE_iar ${ST_CMSIS}/Source/Templates/iar/startup_stm32g0b1xx.s) +set(STARTUP_FILE_GCC ${ST_CMSIS}/Source/Templates/gcc/startup_stm32g0b1xx.s) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_stm32g0b1xx.s) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 184dc6062..d77b3c102 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -28,50 +28,49 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -set(BOARD_TARGET board_${BOARD}) -if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc - ) - target_compile_options(${BOARD_TARGET} PUBLIC - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) - update_board(${BOARD_TARGET}) - - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${TOOLCHAIN}} - ) - - if (TOOLCHAIN STREQUAL "gcc") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_gcc}" - -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs +function(add_board_target TARGET) + if (NOT TARGET ${TARGET}) + add_library(${TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + target_compile_options(${TARGET} PUBLIC ) - else () - # TODO support IAR - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_iar}" + target_compile_definitions(${TARGET} PUBLIC ) + + update_board(${TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GCC") + target_link_options(${TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GCC}" + -nostartfiles + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + # TODO support IAR + target_link_options(${TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () -endif () # BOARD_TARGET +endfunction() #------------------------------------ @@ -80,6 +79,9 @@ endif () # BOARD_TARGET function(family_configure_example TARGET) family_configure_common(${TARGET}) + # Board target + add_board_target(board_${BOARD}) + #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC @@ -100,7 +102,7 @@ function(family_configure_example TARGET) family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) # Link dependencies - target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_stlink(${TARGET}) diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake index 4e8f3f059..3a4849ef6 100644 --- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake +++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake @@ -1,11 +1,11 @@ set(MCU_VARIANT stm32g474xx) set(JLINK_DEVICE stm32g474re) -set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) -set(LD_FILE_iar ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) -set(STARTUP_FILE_gcc ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) -set(STARTUP_FILE_iar ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_GCC ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake index 8cc633449..f13f1fc28 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake @@ -1,11 +1,11 @@ set(MCU_VARIANT stm32g474xx) set(JLINK_DEVICE stm32g474re) -set(LD_FILE_gcc ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) -set(LD_FILE_iar ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) -set(STARTUP_FILE_gcc ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) -set(STARTUP_FILE_iar ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_GCC ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 5578a9b6c..c87486677 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -59,7 +59,7 @@ if (NOT TARGET ${BOARD_TARGET}) if (TOOLCHAIN STREQUAL "gcc") target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_gcc}" + "LINKER:--script=${LD_FILE_GCC}" -nostartfiles # nanolib --specs=nosys.specs @@ -68,7 +68,7 @@ if (NOT TARGET ${BOARD_TARGET}) else () # TODO support IAR target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_iar}" + "LINKER:--config=${LD_FILE_IAR}" ) endif () endif () # BOARD_TARGET diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index ad9fbc7c0..09f41c9ab 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -65,6 +65,8 @@ function(add_tinyusb TARGET) -Wreturn-type -Wredundant-decls ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + endif () endfunction() diff --git a/tools/cmake/cpu/cortex-m0plus.cmake b/tools/cmake/cpu/cortex-m0plus.cmake index 1e316ccfc..bc2257048 100644 --- a/tools/cmake/cpu/cortex-m0plus.cmake +++ b/tools/cmake/cpu/cortex-m0plus.cmake @@ -1,11 +1,17 @@ if (TOOLCHAIN STREQUAL "gcc") - list(APPEND TOOLCHAIN_COMMON_FLAGS + set(TOOLCHAIN_COMMON_FLAGS -mthumb -mcpu=cortex-m0plus -mfloat-abi=soft ) set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") -else () - # TODO support IAR + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m0 + ) + + set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") + endif () diff --git a/tools/cmake/toolchain/arm_gcc.cmake b/tools/cmake/toolchain/arm_gcc.cmake index c7f12f43a..6dd1e7002 100644 --- a/tools/cmake/toolchain/arm_gcc.cmake +++ b/tools/cmake/toolchain/arm_gcc.cmake @@ -1,8 +1,8 @@ set(CMAKE_SYSTEM_NAME Generic) -set(CMAKE_ASM_COMPILER "arm-none-eabi-gcc") set(CMAKE_C_COMPILER "arm-none-eabi-gcc") set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") +set(CMAKE_ASM_COMPILER "arm-none-eabi-gcc") set(CMAKE_SIZE "arm-none-eabi-size" CACHE FILEPATH "") set(CMAKE_OBJCOPY "arm-none-eabi-objcopy" CACHE FILEPATH "") @@ -29,13 +29,13 @@ list(APPEND TOOLCHAIN_COMMON_FLAGS -fno-strict-aliasing ) -list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS +set(TOOLCHAIN_EXE_LINKER_FLAGS -Wl,--print-memory-usage -Wl,--gc-sections -Wl,--cref ) -list(APPEND TOOLCHAIN_WARNING_FLAGS +set(TOOLCHAIN_WARNING_FLAGS -Wall -Wextra -Werror @@ -62,3 +62,11 @@ list(APPEND TOOLCHAIN_WARNING_FLAGS ) include(${CMAKE_CURRENT_LIST_DIR}/set_flags.cmake) + +# try_compile is cmake test compiling its own example, +# pass -nostdlib to skip stdlib linking +get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) +if (IS_IN_TRY_COMPILE) + set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") + set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") +endif () diff --git a/tools/cmake/toolchain/arm_iar.cmake b/tools/cmake/toolchain/arm_iar.cmake new file mode 100644 index 000000000..dfbe55e0d --- /dev/null +++ b/tools/cmake/toolchain/arm_iar.cmake @@ -0,0 +1,34 @@ +set(CMAKE_SYSTEM_NAME Generic) + +set(CMAKE_C_COMPILER "iccarm") +set(CMAKE_CXX_COMPILER "iccarm") +set(CMAKE_ASM_COMPILER "iasmarm") + +set(CMAKE_SIZE "size" CACHE FILEPATH "") +set(CMAKE_OBJCOPY "ielftool" CACHE FILEPATH "") +set(CMAKE_OBJDUMP "iefdumparm" CACHE FILEPATH "") + +set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) + +# Look for includes and libraries only in the target system prefix. +set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) + +# pass TOOLCHAIN_CPU to +set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR) + +include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_PROCESSOR}.cmake) + +# enable all possible warnings for building examples +list(APPEND TOOLCHAIN_COMMON_FLAGS + ) + +list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS + ) + +list(APPEND TOOLCHAIN_WARNING_FLAGS + ) + +include(${CMAKE_CURRENT_LIST_DIR}/set_flags.cmake) diff --git a/tools/cmake/toolchain/set_flags.cmake b/tools/cmake/toolchain/set_flags.cmake index 6f74fe673..44930ef4d 100644 --- a/tools/cmake/toolchain/set_flags.cmake +++ b/tools/cmake/toolchain/set_flags.cmake @@ -1,9 +1,10 @@ include(CMakePrintHelpers) + +# join the toolchain flags into a single string +list(JOIN TOOLCHAIN_COMMON_FLAGS " " TOOLCHAIN_COMMON_FLAGS) + foreach (LANG IN ITEMS C CXX ASM) - # join the toolchain flags into a single string - list(APPEND TOOLCHAIN_${LANG}_FLAGS ${TOOLCHAIN_COMMON_FLAGS}) - list(JOIN TOOLCHAIN_${LANG}_FLAGS " " TOOLCHAIN_${LANG}_FLAGS) - set(CMAKE_${LANG}_FLAGS_INIT "${TOOLCHAIN_${LANG}_FLAGS}") + set(CMAKE_${LANG}_FLAGS_INIT ${TOOLCHAIN_COMMON_FLAGS}) #cmake_print_variables(CMAKE_${LANG}_FLAGS_INIT) @@ -14,11 +15,3 @@ endforeach () # Linker list(JOIN TOOLCHAIN_EXE_LINKER_FLAGS " " CMAKE_EXE_LINKER_FLAGS_INIT) - -# try_compile is cmake test compiling its own example, -# pass -nostdlib to skip stdlib linking -get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) -if (IS_IN_TRY_COMPILE) - set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") - set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") -endif () -- cgit v1.3.1