From 57aac432b52df6d284c98daf591e661d1c55aa05 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 10 Oct 2024 16:22:12 +0700 Subject: add new tusb_int_handler(rhport, in_isr) as common irq handler update tusb_init() to take rhport and role, defined as macro with optional argument for backward compatible --- examples/host/bare_api/src/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'examples/host/bare_api') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index ae574c078..f248dd28d 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -62,7 +62,7 @@ int main(void) printf("TinyUSB Bare API Example\r\n"); // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); if (board_init_after_tusb) { board_init_after_tusb(); -- cgit v1.3.1 From 92602b9de3675c2d3e240bcd0838082e1a07b13b Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 11 Oct 2024 12:58:18 +0700 Subject: change tusb_init(), tusb_rhport_init() to use init struct for expandability --- examples/device/audio_4_channel_mic/src/main.c | 7 ++++- .../device/audio_4_channel_mic_freertos/src/main.c | 7 ++++- examples/device/audio_test/src/main.c | 7 ++++- examples/device/audio_test_freertos/src/main.c | 7 ++++- examples/device/audio_test_multi_rate/src/main.c | 7 ++++- examples/device/cdc_dual_ports/src/main.c | 7 ++++- examples/device/cdc_msc/src/main.c | 7 ++++- examples/device/cdc_msc_freertos/src/main.c | 7 ++++- examples/device/cdc_uac2/src/main.c | 7 ++++- examples/device/dfu/src/main.c | 7 ++++- examples/device/dfu_runtime/src/main.c | 7 ++++- examples/device/dynamic_configuration/src/main.c | 7 ++++- examples/device/hid_boot_interface/src/main.c | 7 ++++- examples/device/hid_composite/src/main.c | 7 ++++- examples/device/hid_composite_freertos/src/main.c | 7 ++++- examples/device/hid_generic_inout/src/main.c | 7 ++++- examples/device/hid_multiple_interface/src/main.c | 7 ++++- examples/device/midi_test/src/main.c | 7 ++++- examples/device/msc_dual_lun/src/main.c | 7 ++++- examples/device/net_lwip_webserver/src/main.c | 7 ++++- examples/device/uac2_headset/src/main.c | 7 ++++- examples/device/uac2_speaker_fb/src/main.c | 7 ++++- examples/device/usbtmc/src/main.c | 7 ++++- examples/device/video_capture/src/main.c | 14 +++++++-- examples/device/video_capture_2ch/src/main.c | 14 +++++++-- examples/device/webusb_serial/src/main.c | 7 ++++- examples/dual/host_hid_to_device_cdc/src/main.c | 15 ++++++++-- examples/dual/host_info_to_device_cdc/src/main.c | 15 ++++++++-- examples/host/bare_api/src/main.c | 7 ++++- examples/host/cdc_msc_hid/src/main.c | 7 ++++- examples/host/cdc_msc_hid_freertos/src/main.c | 8 ++++- examples/host/device_info/src/main.c | 7 ++++- examples/host/hid_controller/src/main.c | 7 ++++- examples/host/msc_file_explorer/src/main.c | 7 ++++- src/common/tusb_common.h | 2 +- src/common/tusb_compiler.h | 8 +++++ src/common/tusb_types.h | 10 +++++++ src/common/tusb_verify.h | 3 -- src/device/usbd.c | 17 ++++++----- src/device/usbd.h | 15 +++++++++- src/host/usbh.c | 16 +++++----- src/host/usbh.h | 22 +++++++++++--- src/tusb.c | 34 ++++++++++++++-------- src/tusb.h | 16 ++++++---- test/unit-test/test/device/msc/test_msc_device.c | 8 ++++- test/unit-test/test/device/usbd/test_usbd.c | 8 ++++- 46 files changed, 348 insertions(+), 80 deletions(-) (limited to 'examples/host/bare_api') diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 6c75d95bf..ca0e67fae 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -86,7 +86,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index d24113df6..c1ebc4899 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -209,7 +209,12 @@ void usb_device_task(void* param) // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 9702060e0..f4c1bf95f 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -79,7 +79,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index 3d9166263..b7d7dc042 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -156,7 +156,12 @@ void usb_device_task(void* param) // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 99b81f74d..a1c4d32db 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -97,7 +97,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 07f41371a..b446bca0b 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -52,7 +52,12 @@ int main(void) { board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index a1f178e2a..47ba5a887 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -51,7 +51,12 @@ int main(void) { board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index b84b33a8c..a08e063ac 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -132,7 +132,12 @@ static void usb_device_task(void *param) { // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index a75ec1427..384d910ec 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -46,7 +46,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); #if (CFG_TUSB_MCU == OPT_MCU_RP2040) stdio_init_all(); diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 5efec9d32..f2aea7cfc 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -75,7 +75,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index c21034fc1..5d6b907b7 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -70,7 +70,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index bc9ab0b2b..143570c5c 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -57,7 +57,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 351a60854..dfee7421d 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -57,7 +57,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 8f7873ee3..56c485982 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -58,7 +58,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index d1842368b..fc07a1a39 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -136,7 +136,12 @@ void usb_device_task(void* param) // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 03de8bfee..1bbcbf7a4 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -81,7 +81,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 0b7544fe0..edcedd3ca 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -62,7 +62,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 84ca1d944..b05307d1b 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -63,7 +63,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index 9b0930ce0..fe3896ca7 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -54,7 +54,12 @@ int main(void) { board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index dbd7746b0..6041b56e2 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -216,7 +216,12 @@ int main(void) { board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 73616109f..4d28f73a4 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -100,7 +100,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 21c2ac24a..1250b041d 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -106,7 +106,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 8dbded632..2af581bc1 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -55,7 +55,12 @@ int main(void) board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 4b8877a2f..c5d87c660 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -68,7 +68,12 @@ int main(void) { freertos_init_task(); #else // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -319,7 +324,12 @@ void usb_device_task(void *param) { // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index 118ee669d..a45e62ab0 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -68,7 +68,12 @@ int main(void) { freertos_init_task(); #else // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -327,7 +332,12 @@ void usb_device_task(void *param) { // init device stack on configured roothub port // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index e809c6319..46215ec13 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -91,7 +91,12 @@ int main(void) { board_init(); // init device stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index ce586201c..061958aae 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -79,8 +79,19 @@ int main(void) { printf("TinyUSB Host HID <-> Device CDC Example\r\n"); // init device and host stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); - tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); + + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 7a862f5ad..e4d802a0c 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -82,8 +82,19 @@ int main(void) { printf("TinyUSB Host Information -> Device CDC Example\r\n"); // init device and host stack on configured roothub port - tusb_init(BOARD_TUD_RHPORT, TUSB_ROLE_DEVICE); - tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); + tusb_rhport_init_t dev_init = { + .rhport = BOARD_TUD_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); + + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index f248dd28d..e710e3caa 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -62,7 +62,12 @@ int main(void) printf("TinyUSB Bare API Example\r\n"); // init host stack on configured roothub port - tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 65f7b5201..3a6e762b7 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -50,7 +50,12 @@ int main(void) { printf("TinyUSB Host CDC MSC HID Example\r\n"); // init host stack on configured roothub port - tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 2116e6dcf..9d2f347c3 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -126,7 +126,13 @@ static void usb_host_task(void *param) { (void) param; // init host stack on configured roothub port - if (!tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST)) { + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + + if (!tusb_init(&host_init)) { printf("Failed to init USB Host Stack\r\n"); vTaskSuspend(NULL); } diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 55d685a5d..8ca3d8a3a 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -66,7 +66,12 @@ int main(void) { printf("TinyUSB Device Info Example\r\n"); // init host stack on configured roothub port - tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 76b686683..6db47792c 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -52,7 +52,12 @@ int main(void) printf("Note: Events only displayed for explicit supported controllers\r\n"); // init host stack on configured roothub port - tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 3af079b0e..11512ab65 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -78,7 +78,12 @@ int main(void) { printf("TinyUSB Host MassStorage Explorer Example\r\n"); // init host stack on configured roothub port - tusb_init(BOARD_TUH_RHPORT, TUSB_ROLE_HOST); + tusb_rhport_init_t host_init = { + .rhport = BOARD_TUH_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 0d4082c03..d3e0cf888 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -79,7 +79,7 @@ //--------------------------------------------------------------------+ // Optional API implemented by application if needed -// TODO move to a more ovious place/file +// TODO move to a more obvious place/file //--------------------------------------------------------------------+ // flush data cache diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index ce5566ffe..646c22b29 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -118,6 +118,14 @@ #define _TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s _TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) #define _TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s _TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) +//--------------------------------------------------------------------+ +// Macro for function default arguments +//--------------------------------------------------------------------+ +#define TU_GET_3RD_ARG(arg1, arg2, arg3, ...) arg3 + +// function expand with number of arguments +#define TU_FUNC_OPTIONAL_ARG(func, ...) TU_XSTRCAT(func##_arg, TU_ARGS_NUM(__VA_ARGS__))(__VA_ARGS__) + //--------------------------------------------------------------------+ // Compiler porting with Attribute and Endian //--------------------------------------------------------------------+ diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index adf4b5720..5dfe3ff98 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -50,6 +50,7 @@ typedef enum { TUSB_SPEED_FULL = 0, TUSB_SPEED_LOW = 1, TUSB_SPEED_HIGH = 2, + TUSB_SPEED_AUTO = 0xaa, TUSB_SPEED_INVALID = 0xff, } tusb_speed_t; @@ -273,6 +274,15 @@ enum { TUSB_INDEX_INVALID_8 = 0xFFu }; +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +typedef struct { + uint8_t rhport; + tusb_role_t role; + tusb_speed_t speed; +} tusb_rhport_init_t; + //--------------------------------------------------------------------+ // USB Descriptors //--------------------------------------------------------------------+ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 8ad218b03..3e0f1f106 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -93,9 +93,6 @@ #define TU_BREAKPOINT() do {} while (0) #endif -// Helper to implement optional parameter for TU_VERIFY Macro family -#define TU_GET_3RD_ARG(arg1, arg2, arg3, ...) arg3 - /*------------------------------------------------------------------*/ /* TU_VERIFY * - TU_VERIFY_1ARGS : return false if failed diff --git a/src/device/usbd.c b/src/device/usbd.c index 6fe7e416e..7e35c976c 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -448,11 +448,14 @@ bool tud_inited(void) { return _usbd_rhport != RHPORT_INVALID; } -bool tud_init(uint8_t rhport) { - // skip if already initialized - if (tud_inited()) return true; +bool tud_rhport_init(const tusb_rhport_init_t* rh_init) { + if (tud_inited()) { + return true; // skip if already initialized + } + TU_ASSERT(rh_init); - TU_LOG_USBD("USBD init on controller %u, Highspeed = %u\r\n", rhport, TUD_OPT_HIGH_SPEED); + TU_LOG_USBD("USBD init on controller %u, speed = %s\r\n", rh_init->rhport, + rh_init->speed == TUSB_SPEED_HIGH ? "High" : "Full"); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(dcd_event_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t)); @@ -484,11 +487,11 @@ bool tud_init(uint8_t rhport) { driver->init(); } - _usbd_rhport = rhport; + _usbd_rhport = rh_init->rhport; // Init device controller driver - dcd_init(rhport); - dcd_int_enable(rhport); + dcd_init(rh_init->rhport); + dcd_int_enable(rh_init->rhport); return true; } diff --git a/src/device/usbd.h b/src/device/usbd.h index 7913096e3..05eb0173f 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -37,8 +37,21 @@ extern "C" { // Application API //--------------------------------------------------------------------+ +// New API to replace tud_init() to init device stack on specific roothub port +bool tud_rhport_init(const tusb_rhport_init_t* rh_init); + // Init device stack on roothub port -bool tud_init (uint8_t rhport); +#if TUSB_VERSION_NUMBER > 2000 // 0.20.0 +TU_ATTR_DEPRECATED("Please use tusb_init(tusb_rhport_init_t*) instead") +#endif +TU_ATTR_ALWAYS_INLINE static inline bool tud_init (uint8_t rhport) { + const tusb_rhport_init_t rh_init = { + .rhport = rhport, + .role = TUSB_ROLE_DEVICE, + .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL + }; + return tud_rhport_init(&rh_init); +} // Deinit device stack on roothub port bool tud_deinit(uint8_t rhport); diff --git a/src/host/usbh.c b/src/host/usbh.c index ed253ffcc..39bc8d63a 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -352,11 +352,13 @@ bool tuh_inited(void) { return _usbh_controller != TUSB_INDEX_INVALID_8; } -bool tuh_init(uint8_t rhport) { - // skip if already initialized - if (tuh_rhport_is_active(rhport)) return true; +bool tuh_rhport_init(const tusb_rhport_init_t* rh_init) { + if (tuh_rhport_is_active(rh_init->rhport)) { + return true; // skip if already initialized + } - TU_LOG_USBH("USBH init on controller %u\r\n", rhport); + TU_LOG_USBH("USBH init on controller %u, speed = %s\r\n", rhport, + rh_init->speed == TUSB_SPEED_HIGH ? "High" : "Full"); // Init host stack if not already if (!tuh_inited()) { @@ -402,9 +404,9 @@ bool tuh_init(uint8_t rhport) { } // Init host controller - _usbh_controller = rhport;; - TU_ASSERT(hcd_init(rhport)); - hcd_int_enable(rhport); + _usbh_controller = rh_init->rhport; + TU_ASSERT(hcd_init(rh_init->rhport)); + hcd_int_enable(rh_init->rhport); return true; } diff --git a/src/host/usbh.h b/src/host/usbh.h index 217cb1a9c..9b865ac1b 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -120,8 +120,21 @@ void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr); // - cfg_param: configure data, structure depends on the ID bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); +// New API to replace tuh_init() to init host stack on specific roothub port +bool tuh_rhport_init(const tusb_rhport_init_t* rh_init); + // Init host stack -bool tuh_init(uint8_t rhport); +#if TUSB_VERSION_NUMBER > 2000 // 0.20.0 +TU_ATTR_DEPRECATED("Please use tusb_init(tusb_rhport_init_t*) instead") +#endif +TU_ATTR_ALWAYS_INLINE static inline bool tuh_init(uint8_t rhport) { + const tusb_rhport_init_t rh_init = { + .rhport = rhport, + .role = TUSB_ROLE_HOST, + .speed = TUH_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL, + }; + return tuh_rhport_init(&rh_init); +} // Deinit host stack on rhport bool tuh_deinit(uint8_t rhport); @@ -149,9 +162,10 @@ extern void hcd_int_handler(uint8_t rhport, bool in_isr); #endif // Interrupt handler alias to HCD with in_isr as optional parameter -#define _tuh_int_handler_1arg(_rhport) hcd_int_handler(_rhport, true) -#define _tuh_int_hanlder_2arg(_rhport, _in_isr) hcd_int_handler(_rhport, _in_isr) -#define tuh_int_handler(...) TU_GET_3RD_ARG(__VA_ARGS__, _tuh_int_hanlder_2arg, _tuh_int_handler_1arg, _dummy)(__VA_ARGS__) +#define _tuh_int_handler_arg0() TU_VERIFY_STATIC(false, "tuh_int_handler() must have 1 or 2 arguments") +#define _tuh_int_handler_arg1(_rhport) hcd_int_handler(_rhport, true) +#define _tuh_int_handler_arg2(_rhport, _in_isr) hcd_int_handler(_rhport, _in_isr) +#define tuh_int_handler(...) TU_FUNC_OPTIONAL_ARG(_tuh_int_handler, __VA_ARGS__) // Check if roothub port is initialized and active as a host bool tuh_rhport_is_active(uint8_t rhport); diff --git a/src/tusb.c b/src/tusb.c index 9f0e45fef..3eb299dff 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -47,19 +47,29 @@ static tusb_role_t _rhport_role[TUP_USBIP_CONTROLLER_NUM] = { 0 }; // Public API //--------------------------------------------------------------------+ -bool _tusb_rhport_init(uint8_t rhport, tusb_role_t role) { +bool tusb_rhport_init(const tusb_rhport_init_t* rh_init) { // backward compatible called with tusb_init(void) #if defined(TUD_OPT_RHPORT) || defined(TUH_OPT_RHPORT) - if (rhport == 0xff || role == TUSB_ROLE_INVALID) { + if (rh_init == NULL) { #if CFG_TUD_ENABLED && defined(TUD_OPT_RHPORT) // init device stack CFG_TUSB_RHPORTx_MODE must be defined - TU_ASSERT ( tud_init(TUD_OPT_RHPORT) ); + const tusb_rhport_init_t dev_init = { + .rhport = TUD_OPT_RHPORT, + .role = TUSB_ROLE_DEVICE, + .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL + }; + TU_ASSERT ( tud_rhport_init(&dev_init) ); _rhport_role[TUD_OPT_RHPORT] = TUSB_ROLE_DEVICE; #endif #if CFG_TUH_ENABLED && defined(TUH_OPT_RHPORT) // init host stack CFG_TUSB_RHPORTx_MODE must be defined - TU_ASSERT( tuh_init(TUH_OPT_RHPORT) ); + const tusb_rhport_init_t host_init = { + .rhport = TUH_OPT_RHPORT, + .role = TUSB_ROLE_HOST, + .speed = TUH_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL + }; + TU_ASSERT( tuh_rhport_init(&host_init) ); _rhport_role[TUH_OPT_RHPORT] = TUSB_ROLE_HOST; #endif @@ -68,21 +78,21 @@ bool _tusb_rhport_init(uint8_t rhport, tusb_role_t role) { #endif // new API with explicit rhport and role - TU_ASSERT(rhport < TUP_USBIP_CONTROLLER_NUM && role != TUSB_ROLE_INVALID); + TU_ASSERT(rh_init->rhport < TUP_USBIP_CONTROLLER_NUM && rh_init->role != TUSB_ROLE_INVALID); #if CFG_TUD_ENABLED - if (role == TUSB_ROLE_DEVICE) { - TU_ASSERT( tud_init(rhport) ); + if (rh_init->role == TUSB_ROLE_DEVICE) { + TU_ASSERT( tud_rhport_init(rh_init) ); } #endif #if CFG_TUH_ENABLED - if (role == TUSB_ROLE_HOST) { - TU_ASSERT( tuh_init(rhport) ); + if (rh_init->role == TUSB_ROLE_HOST) { + TU_ASSERT( tuh_rhport_init(rh_init) ); } #endif - _rhport_role[rhport] = role; + _rhport_role[rh_init->rhport] = rh_init->role; return true; } @@ -106,13 +116,13 @@ void tusb_int_handler(uint8_t rhport, bool in_isr) { #if CFG_TUD_ENABLED if (_rhport_role[rhport] == TUSB_ROLE_DEVICE) { (void) in_isr; - tud_int_handler(rhport); + dcd_int_handler(rhport); } #endif #if CFG_TUH_ENABLED if (_rhport_role[rhport] == TUSB_ROLE_HOST) { - tuh_int_handler(rhport, in_isr); + hcd_int_handler(rhport, in_isr); } #endif } diff --git a/src/tusb.h b/src/tusb.h index 911d1bae0..c12abba8b 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -129,19 +129,25 @@ //--------------------------------------------------------------------+ // APPLICATION API //--------------------------------------------------------------------+ + + #if CFG_TUH_ENABLED || CFG_TUD_ENABLED // Internal helper for backward compatible with tusb_init(void) -bool _tusb_rhport_init(uint8_t rhport, tusb_role_t role); +bool tusb_rhport_init(const tusb_rhport_init_t* rh_init); // Initialize roothub port with device/host role // Note: when using with RTOS, this should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. // Note2: defined as macro for backward compatible with tusb_init(void), can be changed to function in the future. -#define _tusb_init_0arg() _tusb_rhport_init(0xff, TUSB_ROLE_INVALID) -#define _tusb_init_1arg(_rhport) _tusb_rhport_init(_rhport, TUSB_ROLE_INVALID) -#define _tusb_init_2arg(_rhport, _role) _tusb_rhport_init(_rhport, _role) -#define tusb_init(...) TU_GET_3RD_ARG(__VA_ARGS__, _tusb_init_2arg, _tusb_init_1arg, _tusb_init_0arg)(__VA_ARGS__) +#if defined(TUD_OPT_RHPORT) || defined(TUH_OPT_RHPORT) +#define _tusb_init_arg0() tusb_rhport_init(NULL) +#else +#define _tusb_init_arg0() TU_VERIFY_STATIC(false, "CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE must be defined") +#endif + +#define _tusb_init_arg1(_rh_init) tusb_rhport_init(_rh_init) +#define tusb_init(...) TU_FUNC_OPTIONAL_ARG(_tusb_init, __VA_ARGS__) // Check if stack is initialized bool tusb_inited(void); diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index 28216af10..3444d81c5 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -200,7 +200,13 @@ void setUp(void) if ( !tud_inited() ) { dcd_init_Expect(rhport); - tusb_init(0, TUSB_ROLE_DEVICE); + + tusb_rhport_init_t dev_init = { + .rhport = 0, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); } dcd_event_bus_reset(rhport, TUSB_SPEED_HIGH, false); diff --git a/test/unit-test/test/device/usbd/test_usbd.c b/test/unit-test/test/device/usbd/test_usbd.c index 43722d175..faa6b159e 100644 --- a/test/unit-test/test/device/usbd/test_usbd.c +++ b/test/unit-test/test/device/usbd/test_usbd.c @@ -128,7 +128,13 @@ void setUp(void) { mscd_init_Expect(); dcd_init_Expect(rhport); - tusb_init(0, TUSB_ROLE_DEVICE); + + tusb_rhport_init_t dev_init = { + .rhport = 0, + .role = TUSB_ROLE_DEVICE, + .speed = TUSB_SPEED_AUTO + }; + tusb_init(&dev_init); } } -- cgit v1.3.1 From 1f18be93db39dbc57bbf34f982dbe07e209a2ae3 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 14 Oct 2024 18:27:52 +0700 Subject: change the tusb_rhport_init_t struct, exclude the rhport to make API more consistent --- .github/workflows/pre-commit.yml | 2 +- .idea/cmake.xml | 13 +++++++------ examples/device/audio_4_channel_mic/src/main.c | 3 +-- .../device/audio_4_channel_mic_freertos/src/main.c | 3 +-- examples/device/audio_test/src/main.c | 3 +-- examples/device/audio_test_freertos/src/main.c | 3 +-- examples/device/audio_test_multi_rate/src/main.c | 3 +-- examples/device/cdc_dual_ports/src/main.c | 3 +-- examples/device/cdc_msc/src/main.c | 3 +-- examples/device/cdc_msc_freertos/src/main.c | 3 +-- examples/device/cdc_uac2/src/main.c | 3 +-- examples/device/dfu/src/main.c | 3 +-- examples/device/dfu_runtime/src/main.c | 3 +-- examples/device/dynamic_configuration/src/main.c | 3 +-- examples/device/hid_boot_interface/src/main.c | 3 +-- examples/device/hid_composite/src/main.c | 3 +-- examples/device/hid_composite_freertos/src/main.c | 3 +-- examples/device/hid_generic_inout/src/main.c | 3 +-- examples/device/hid_multiple_interface/src/main.c | 3 +-- examples/device/midi_test/src/main.c | 3 +-- examples/device/msc_dual_lun/src/main.c | 3 +-- examples/device/net_lwip_webserver/src/main.c | 3 +-- examples/device/uac2_headset/src/main.c | 3 +-- examples/device/uac2_speaker_fb/src/main.c | 3 +-- examples/device/usbtmc/src/main.c | 3 +-- examples/device/video_capture/src/main.c | 6 ++---- examples/device/video_capture_2ch/src/main.c | 6 ++---- examples/device/webusb_serial/src/main.c | 3 +-- examples/dual/host_hid_to_device_cdc/src/main.c | 6 ++---- examples/dual/host_info_to_device_cdc/src/main.c | 6 ++---- examples/host/bare_api/src/main.c | 3 +-- examples/host/cdc_msc_hid/src/main.c | 3 +-- examples/host/cdc_msc_hid_freertos/src/main.c | 3 +-- examples/host/device_info/src/main.c | 3 +-- examples/host/hid_controller/src/main.c | 3 +-- examples/host/msc_file_explorer/src/main.c | 3 +-- src/class/video/video_device.c | 2 +- src/common/tusb_types.h | 1 - src/device/dcd.h | 2 +- src/device/usbd.c | 8 ++++---- src/device/usbd.h | 7 +++---- src/host/hcd.h | 2 +- src/host/usbh.c | 10 +++++----- src/host/usbh.h | 7 +++---- src/portable/analog/max3421/hcd_max3421.c | 4 ++-- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 4 ++-- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 4 ++-- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 4 ++-- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 8 +++++--- src/portable/dialog/da146xx/dcd_da146xx.c | 4 ++-- src/portable/espressif/esp32sx/dcd_esp32sx.c | 4 ++-- src/portable/mentor/musb/dcd_musb.c | 4 ++-- src/portable/mentor/musb/hcd_musb.c | 3 ++- src/portable/microchip/pic/dcd_pic.c | 4 ++-- src/portable/microchip/pic32mz/dcd_pic32mz.c | 4 ++-- src/portable/microchip/samd/dcd_samd.c | 4 ++-- src/portable/microchip/samg/dcd_samg.c | 5 +++-- src/portable/microchip/samx7x/dcd_samx7x.c | 4 ++-- src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c | 4 ++-- src/portable/nordic/nrf5x/dcd_nrf5x.c | 6 +++--- src/portable/nuvoton/nuc120/dcd_nuc120.c | 4 ++-- src/portable/nuvoton/nuc121/dcd_nuc121.c | 4 ++-- src/portable/nuvoton/nuc505/dcd_nuc505.c | 4 ++-- src/portable/nxp/khci/dcd_khci.c | 4 ++-- src/portable/nxp/khci/hcd_khci.c | 3 ++- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 4 ++-- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 4 ++-- src/portable/ohci/ohci.c | 4 ++-- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 3 ++- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 3 ++- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 4 ++-- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 3 ++- src/portable/renesas/rusb2/dcd_rusb2.c | 4 ++-- src/portable/renesas/rusb2/hcd_rusb2.c | 4 ++-- src/portable/sony/cxd56/dcd_cxd56.c | 4 ++-- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 4 ++-- src/portable/sunxi/dcd_sunxi_musb.c | 4 ++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 ++-- src/portable/template/dcd_template.c | 4 ++-- src/portable/template/hcd_template.c | 3 ++- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 7 +++---- src/portable/valentyusb/eptri/dcd_eptri.c | 4 ++-- src/portable/wch/dcd_ch32_usbfs.c | 4 ++-- src/portable/wch/dcd_ch32_usbhs.c | 4 ++-- src/tusb.c | 16 +++++++--------- src/tusb.h | 11 ++++++----- test/fuzz/dcd_fuzz.cc | 3 ++- test/unit-test/test/device/msc/test_msc_device.c | 5 ++--- test/unit-test/test/device/usbd/test_usbd.c | 20 +++++++------------- 89 files changed, 174 insertions(+), 213 deletions(-) (limited to 'examples/host/bare_api') diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 379a22ee2..530484079 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -29,7 +29,7 @@ jobs: #ceedling test:all - name: Run pre-commit - uses: pre-commit/action@v3.0.0 + uses: pre-commit/action@v3.0.1 - name: Build Fuzzer run: | diff --git a/.idea/cmake.xml b/.idea/cmake.xml index c0b55a82e..05dceda5a 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,6 +2,9 @@ + + + @@ -80,7 +83,7 @@ - + @@ -94,11 +97,11 @@ - + - + @@ -109,9 +112,6 @@ - - - @@ -148,6 +148,7 @@ + \ No newline at end of file diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index ca0e67fae..e8c40309e 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -87,11 +87,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index c1ebc4899..2ac7516cd 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -210,11 +210,10 @@ void usb_device_task(void* param) // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index f4c1bf95f..018c48994 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -80,11 +80,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index b7d7dc042..4e2264b5d 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -157,11 +157,10 @@ void usb_device_task(void* param) // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index a1c4d32db..f9dcd1b8a 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -98,11 +98,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index b446bca0b..63ae8a8c9 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -53,11 +53,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 47ba5a887..f36c910d7 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -52,11 +52,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index a08e063ac..f70267e33 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -133,11 +133,10 @@ static void usb_device_task(void *param) { // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index 384d910ec..b148593da 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -47,11 +47,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); #if (CFG_TUSB_MCU == OPT_MCU_RP2040) stdio_init_all(); diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index f2aea7cfc..af9e99857 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -76,11 +76,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 5d6b907b7..4740c18c4 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -71,11 +71,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 143570c5c..32ff58232 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -58,11 +58,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index dfee7421d..570e4e801 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -58,11 +58,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 56c485982..5302af3b8 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -59,11 +59,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index fc07a1a39..ae091571e 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -137,11 +137,10 @@ void usb_device_task(void* param) // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 1bbcbf7a4..73f51002d 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -82,11 +82,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index edcedd3ca..92c7e8332 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -63,11 +63,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index b05307d1b..d7849a2c4 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -64,11 +64,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index fe3896ca7..012095dca 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -55,11 +55,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 6041b56e2..8af7a9de6 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -217,11 +217,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 4d28f73a4..6b2ab0973 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -101,11 +101,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 1250b041d..53bbec9b6 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -107,11 +107,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 2af581bc1..aa7902a15 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -56,11 +56,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index c5d87c660..aeeeb8930 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -69,11 +69,10 @@ int main(void) { #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -325,11 +324,10 @@ void usb_device_task(void *param) { // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index a45e62ab0..dd6983766 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -69,11 +69,10 @@ int main(void) { #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -333,11 +332,10 @@ void usb_device_task(void *param) { // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 46215ec13..d189af91f 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -92,11 +92,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 061958aae..633f7a6ac 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -80,18 +80,16 @@ int main(void) { // init device and host stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index e4d802a0c..668808db2 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -83,18 +83,16 @@ int main(void) { // init device and host stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index e710e3caa..f582f4f5a 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -63,11 +63,10 @@ int main(void) // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 3a6e762b7..71257c0fe 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -51,11 +51,10 @@ int main(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 9d2f347c3..7fb84a40f 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -127,12 +127,11 @@ static void usb_host_task(void *param) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - if (!tusb_init(&host_init)) { + if (!tusb_init(BOARD_TUH_RHPORT, &host_init)) { printf("Failed to init USB Host Stack\r\n"); vTaskSuspend(NULL); } diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 8ca3d8a3a..0ff4f32e9 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -67,11 +67,10 @@ int main(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 6db47792c..ba12774bd 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -53,11 +53,10 @@ int main(void) // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 11512ab65..9509035b4 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -79,11 +79,10 @@ int main(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index c544a09fe..70dbb5b9e 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -707,7 +707,7 @@ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t /* The first descriptor is a video control interface descriptor. */ uint8_t const *cur = _find_desc_itf(beg, end, _desc_itfnum(beg), altnum); - TU_LOG_DRV(" cur %d\r\n", cur - beg); + TU_LOG_DRV(" cur %" PRId32 "\r\n", (int32_t) (cur - beg)); TU_VERIFY(cur < end); tusb_desc_vc_itf_t const *vc = (tusb_desc_vc_itf_t const *)cur; diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 5dfe3ff98..53bb367cb 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -278,7 +278,6 @@ enum { // //--------------------------------------------------------------------+ typedef struct { - uint8_t rhport; tusb_role_t role; tusb_speed_t speed; } tusb_rhport_init_t; diff --git a/src/device/dcd.h b/src/device/dcd.h index 02f3847ff..64dffbaef 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -108,7 +108,7 @@ void dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W //--------------------------------------------------------------------+ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init); +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Deinitialize controller, unset device mode. bool dcd_deinit(uint8_t rhport); diff --git a/src/device/usbd.c b/src/device/usbd.c index 12f95ab40..4b6600eb2 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -448,7 +448,7 @@ bool tud_inited(void) { return _usbd_rhport != RHPORT_INVALID; } -bool tud_rhport_init(const tusb_rhport_init_t* rh_init) { +bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { if (tud_inited()) { return true; // skip if already initialized } @@ -487,11 +487,11 @@ bool tud_rhport_init(const tusb_rhport_init_t* rh_init) { driver->init(); } - _usbd_rhport = rh_init->rhport; + _usbd_rhport = rhport; // Init device controller driver - dcd_init(rh_init); - dcd_int_enable(rh_init->rhport); + dcd_init(rhport, rh_init); + dcd_int_enable(rhport); return true; } diff --git a/src/device/usbd.h b/src/device/usbd.h index 05eb0173f..de6007fb3 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -38,19 +38,18 @@ extern "C" { //--------------------------------------------------------------------+ // New API to replace tud_init() to init device stack on specific roothub port -bool tud_rhport_init(const tusb_rhport_init_t* rh_init); +bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Init device stack on roothub port #if TUSB_VERSION_NUMBER > 2000 // 0.20.0 -TU_ATTR_DEPRECATED("Please use tusb_init(tusb_rhport_init_t*) instead") +TU_ATTR_DEPRECATED("Please use tusb_init(rhport, rh_init) instead") #endif TU_ATTR_ALWAYS_INLINE static inline bool tud_init (uint8_t rhport) { const tusb_rhport_init_t rh_init = { - .rhport = rhport, .role = TUSB_ROLE_DEVICE, .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; - return tud_rhport_init(&rh_init); + return tud_rhport_init(rhport, &rh_init); } // Deinit device stack on roothub port diff --git a/src/host/hcd.h b/src/host/hcd.h index 97cb01754..6518e6fd2 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -121,7 +121,7 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Initialize controller to host mode -bool hcd_init(const tusb_rhport_init_t* rh_init); +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // De-initialize controller bool hcd_deinit(uint8_t rhport); diff --git a/src/host/usbh.c b/src/host/usbh.c index f9e6c4e97..b5df29f50 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -352,8 +352,8 @@ bool tuh_inited(void) { return _usbh_controller != TUSB_INDEX_INVALID_8; } -bool tuh_rhport_init(const tusb_rhport_init_t* rh_init) { - if (tuh_rhport_is_active(rh_init->rhport)) { +bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + if (tuh_rhport_is_active(rhport)) { return true; // skip if already initialized } @@ -404,9 +404,9 @@ bool tuh_rhport_init(const tusb_rhport_init_t* rh_init) { } // Init host controller - _usbh_controller = rh_init->rhport; - TU_ASSERT(hcd_init(rh_init)); - hcd_int_enable(rh_init->rhport); + _usbh_controller = rhport; + TU_ASSERT(hcd_init(rhport, rh_init)); + hcd_int_enable(rhport); return true; } diff --git a/src/host/usbh.h b/src/host/usbh.h index 9b865ac1b..20fad284e 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -121,19 +121,18 @@ void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr); bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // New API to replace tuh_init() to init host stack on specific roothub port -bool tuh_rhport_init(const tusb_rhport_init_t* rh_init); +bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Init host stack #if TUSB_VERSION_NUMBER > 2000 // 0.20.0 -TU_ATTR_DEPRECATED("Please use tusb_init(tusb_rhport_init_t*) instead") +TU_ATTR_DEPRECATED("Please use tusb_init(rhport, rh_init) instead") #endif TU_ATTR_ALWAYS_INLINE static inline bool tuh_init(uint8_t rhport) { const tusb_rhport_init_t rh_init = { - .rhport = rhport, .role = TUSB_ROLE_HOST, .speed = TUH_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL, }; - return tuh_rhport_init(&rh_init); + return tuh_rhport_init(rhport, &rh_init); } // Deinit host stack on rhport diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 30d822c3b..c5e924266 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -494,8 +494,8 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { } // Initialize controller to host mode -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; tuh_max3421_int_api(rhport, false); diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index f4b236da6..4e7b28825 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -517,8 +517,8 @@ static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len *------------------------------------------------------------------*/ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; TU_LOG2("FT9xx initialisation\r\n"); _dcd_ft9xx_attach(); diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 315e9a86d..6038160cf 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -267,9 +267,9 @@ static void process_bus_resume(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; // save crystal-less setting (if available) #if defined(FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED) && FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED == 1 diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index bdb7abe41..5204dee66 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -234,8 +234,8 @@ static void bus_reset(uint8_t rhport) dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; tu_memclr(&_dcd_data, sizeof(dcd_data_t)); ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index fbc51f6df..14f8acb45 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -70,8 +70,8 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { // Controller API //--------------------------------------------------------------------+ -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; ci_hs_regs_t *hcd_reg = CI_HS_REG(rhport); // Reset controller @@ -83,7 +83,9 @@ bool hcd_init(const tusb_rhport_init_t* rh_init) { // LPC18XX/43XX need to set VBUS Power Select to HIGH // RHPORT1 is fullspeed only (need external PHY for Highspeed) hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT; - if ( rhport == 1 ) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; + if (rhport == 1) { + hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; + } #else hcd_reg->USBMODE = USBMODE_CM_HOST; #endif diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c index 05cebea0b..558e1269a 100644 --- a/src/portable/dialog/da146xx/dcd_da146xx.c +++ b/src/portable/dialog/da146xx/dcd_da146xx.c @@ -804,9 +804,9 @@ static void handle_ep0_nak(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; _dcd.init_called = true; if (_dcd.vbus_present) diff --git a/src/portable/espressif/esp32sx/dcd_esp32sx.c b/src/portable/espressif/esp32sx/dcd_esp32sx.c index 3d4757f03..d233813d4 100644 --- a/src/portable/espressif/esp32sx/dcd_esp32sx.c +++ b/src/portable/espressif/esp32sx/dcd_esp32sx.c @@ -172,8 +172,8 @@ static void enum_done_processing(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; ESP_LOGV(TAG, "DCD init - Start"); // A. Disconnect diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index a8437ad5b..02c8da1e0 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -582,8 +582,8 @@ void print_musb_info(musb_regs_t* musb_regs) { } #endif -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; musb_regs_t* musb_regs = MUSB_REGS(rhport); #if CFG_TUSB_DEBUG >= MUSB_DEBUG diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 9324c6a34..1c0740193 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -556,7 +556,8 @@ static void process_pipe_rx(uint8_t rhport, uint_fast8_t pipenum) * Host API *------------------------------------------------------------------*/ -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; NVIC_ClearPendingIRQ(USB0_IRQn); diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 3ee0ab6d5..089d3f520 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -470,8 +470,8 @@ static void process_bus_resume(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; intr_disable(rhport); intr_clear(rhport); diff --git a/src/portable/microchip/pic32mz/dcd_pic32mz.c b/src/portable/microchip/pic32mz/dcd_pic32mz.c index 004990046..f1614f30c 100644 --- a/src/portable/microchip/pic32mz/dcd_pic32mz.c +++ b/src/portable/microchip/pic32mz/dcd_pic32mz.c @@ -120,8 +120,8 @@ static ep0_stage_t ep0_get_stage(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; // Disable endpoint interrupts for now USB_REGS->INTRRXEbits.w = 0; USB_REGS->INTRTXEbits.w = 0; diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index c3a74ad0f..8120681a7 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -78,8 +78,8 @@ static void bus_reset(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - (void) rh_init; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; // Reset to get in a clean state. USB->DEVICE.CTRLA.bit.SWRST = true; diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index 2242d3336..b02889b24 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -155,8 +155,9 @@ static void bus_reset(void) } // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; + (void) rh_init; tu_memclr(_dcd_xfer, sizeof(_dcd_xfer)); dcd_connect(rhport); } diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index d57db6e55..a85d2306e 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -104,8 +104,8 @@ TU_ATTR_ALWAYS_INLINE static inline void CleanInValidateCache(uint32_t *addr, in //------------------------------------------------------------------ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; dcd_connect(rhport); } diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index 4117ab45f..b74ca847a 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -245,9 +245,9 @@ static void process_bus_active(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; tu_memclr(&_dcd, sizeof(_dcd)); USB_OTG_FS->BDT_PAGE_01 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index c1084c20c..06474e65d 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -230,10 +230,10 @@ static void xact_in_dma(uint8_t epnum) { //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; - TU_LOG2("dcd init\r\n"); +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; + TU_LOG2("dcd init\r\n"); } void dcd_int_enable(uint8_t rhport) { diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c index c9e8d86fd..89fca021f 100644 --- a/src/portable/nuvoton/nuc120/dcd_nuc120.c +++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c @@ -201,9 +201,9 @@ static const uint32_t enabled_irqs = USBD_INTSTS_FLDET_STS_Msk | USBD_INTSTS_BUS NUC100/NUC120 TinyUSB API driver implementation */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; USBD->ATTR = 0x7D0; diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c index 78c65a91c..b813eea77 100644 --- a/src/portable/nuvoton/nuc121/dcd_nuc121.c +++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c @@ -209,9 +209,9 @@ enum { NUC121/NUC125/NUC126 TinyUSB API driver implementation */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; #ifdef SUPPORT_LPM USBD->ATTR = 0x7D0 | USBD_LPMACK; diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index caeb89a0a..3821b6ec8 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -279,9 +279,9 @@ static const uint32_t enabled_irqs = USBD_GINTEN_USBIEN_Msk | \ NUC505 TinyUSB API driver implementation */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; /* configure interrupts in their initial state; BUSINTEN and CEPINTEN will be subsequently and dynamically re-written as needed */ USBD->GINTEN = enabled_irqs; diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 2d08e84a5..1b7f56e8c 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -265,9 +265,9 @@ static void process_bus_resume(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; // save crystal-less setting (if available) #if defined(FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED) && FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED == 1 diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index e9c00b8f9..f5ca73c18 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -368,7 +368,8 @@ static void process_bus_reset(uint8_t rhport) /*------------------------------------------------------------------*/ /* Host API *------------------------------------------------------------------*/ -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; KHCI->USBTRC0 |= USB_USBTRC0_USBRESET_MASK; while (KHCI->USBTRC0 & USB_USBTRC0_USBRESET_MASK); diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index e28b27919..22b4500c5 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -167,9 +167,9 @@ static void bus_reset(void) tu_memclr(&_dcd, sizeof(dcd_data_t)); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; //------------- user manual 11.13 usb device controller initialization -------------// // step 6 : set up control endpoint diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 06a82c4e7..e59a0f526 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -289,8 +289,8 @@ static void edpt_reset_all(uint8_t rhport) } prepare_setup_packet(rhport); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; edpt_reset_all(rhport); dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index fbaa5208e..ce35eab70 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -178,9 +178,9 @@ TU_ATTR_ALWAYS_INLINE static inline void *_virt_addr(void *physical_address) } // Initialization according to 5.1.1.4 -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; //------------- Data Structure init -------------// tu_memclr(&ohci_data, sizeof(ohci_data_t)); diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 83589efa0..89d60a21e 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -50,7 +50,8 @@ static usb_descriptor_buffers_t desc; *------------------------------------------------------------------*/ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; static pio_usb_configuration_t config = PIO_USB_DEFAULT_CONFIG; usb_device = pio_usb_device_init(&config, &desc); diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 4386bbce4..6422afff1 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -55,7 +55,8 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { return true; } -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; // To run USB SOF interrupt in core1, call this init in core1 diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 9473d3bd8..9a945caf8 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -369,8 +369,8 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { #define PICO_SHARED_IRQ_HANDLER_HIGHEST_ORDER_PRIORITY 0xff #endif -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; assert(rhport == 0); TU_LOG(2, "Chip Version B%u\r\n", rp2040_chip_version()); diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index a870418a8..2c0a3fd49 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -375,7 +375,8 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; pico_trace("hcd_init %d\n", rhport); assert(rhport == 0); diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index e8e1bf041..3da4ef50b 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -657,8 +657,8 @@ static void enable_interrupt(uint32_t pswi) } #endif -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; rusb2_reg_t* rusb = RUSB2_REG(rhport); rusb2_module_start(rhport, true); diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 35e85a3b0..4c81b05be 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -466,8 +466,8 @@ static void enable_interrupt(uint32_t pswi) } #endif -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; rusb2_reg_t* rusb = RUSB2_REG(rhport); rusb2_module_start(rhport, true); diff --git a/src/portable/sony/cxd56/dcd_cxd56.c b/src/portable/sony/cxd56/dcd_cxd56.c index fe1c42249..93eb8674e 100644 --- a/src/portable/sony/cxd56/dcd_cxd56.c +++ b/src/portable/sony/cxd56/dcd_cxd56.c @@ -201,9 +201,9 @@ static void _dcd_resume(FAR struct usbdevclass_driver_s *driver, FAR struct usbd dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; usbdcd_driver.usbdevclass_driver.speed = USB_SPEED_HIGH; usbdcd_driver.usbdevclass_driver.ops = &g_driverops; diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 8e9bb0b30..a4bd2da10 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -184,8 +184,8 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint8_t epnum, uint //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; // Follow the RM mentions to use a special ordering of PDWN and FRES for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index d7bf1068a..85c7bef5d 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -867,8 +867,8 @@ static void usb_isr_handler(void) { dcd_int_handler(0); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; dcd_disconnect(rhport); USBC_HardwareReset(); USBC_PhyConfig(); diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 580960e24..e44ca96d1 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -650,10 +650,10 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { return true; } -void dcd_init(const tusb_rhport_init_t* rh_init) { +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; // Programming model begins in the last section of the chapter on the USB // peripheral in each Reference Manual. - const uint8_t rhport = rh_init->rhport; dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Check Synopsys ID register, failed if controller clock/power is not enabled diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c index 56a89e89a..5ce650844 100644 --- a/src/portable/template/dcd_template.c +++ b/src/portable/template/dcd_template.c @@ -40,8 +40,8 @@ *------------------------------------------------------------------*/ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - (void) rh_init; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; } // Enable device interrupt diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index 9386e95cc..d8bca196f 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -44,7 +44,8 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { } // Initialize controller to host mode -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; return false; } diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 120d5c4b9..6150c254f 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -130,8 +130,8 @@ static void enable_functional_reset(const bool enable) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - (void) rh_init; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; USBKEYPID = USBKEY; @@ -699,11 +699,10 @@ static void handle_bus_power_event(void *param) { // A successful lock is indicated by all PLL-related interrupt flags being cleared. if(!USBPLLIR) { const tusb_rhport_init_t rhport_init = { - .rhport = 0, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_FULL }; - dcd_init(&rhport_init); // Re-initialize the USB module. + dcd_init(0, &rhport_init); // Re-initialize the USB module. } } else { // Event caused by removal of bus power. USBPWRCTL |= VBONIE; // Enable bus-power-applied interrupt. diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c index da7a5a81a..8287230a4 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.c +++ b/src/portable/valentyusb/eptri/dcd_eptri.c @@ -336,9 +336,9 @@ static void dcd_reset(void) } // Initializes the USB peripheral for device mode and enables it. -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; usb_pullup_out_write(0); diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 4a7ad704b..9af3a1acb 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -123,8 +123,8 @@ static void update_out(uint8_t rhport, uint8_t ep, size_t rx_len) { } /* public functions */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; // init registers USBOTG_FS->BASE_CTRL = USBFS_CTRL_SYS_CTRL | USBFS_CTRL_INT_BUSY | USBFS_CTRL_DMA_EN; USBOTG_FS->UDEV_CTRL = USBFS_UDEV_CTRL_PD_DIS | USBFS_UDEV_CTRL_PORT_EN; diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 77ebc378c..64a88914f 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -131,9 +131,9 @@ static void xfer_data_packet(uint8_t ep_num, tusb_dir_t ep_dir, xfer_ctl_t* xfer ep_set_response_and_toggle(ep_num, ep_dir, USBHS_EP_R_RES_ACK); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; memset(&xfer_status, 0, sizeof(xfer_status)); diff --git a/src/tusb.c b/src/tusb.c index 3eb299dff..e6f8055b7 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -47,29 +47,27 @@ static tusb_role_t _rhport_role[TUP_USBIP_CONTROLLER_NUM] = { 0 }; // Public API //--------------------------------------------------------------------+ -bool tusb_rhport_init(const tusb_rhport_init_t* rh_init) { +bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // backward compatible called with tusb_init(void) #if defined(TUD_OPT_RHPORT) || defined(TUH_OPT_RHPORT) if (rh_init == NULL) { #if CFG_TUD_ENABLED && defined(TUD_OPT_RHPORT) // init device stack CFG_TUSB_RHPORTx_MODE must be defined const tusb_rhport_init_t dev_init = { - .rhport = TUD_OPT_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; - TU_ASSERT ( tud_rhport_init(&dev_init) ); + TU_ASSERT ( tud_rhport_init(rhport, &dev_init) ); _rhport_role[TUD_OPT_RHPORT] = TUSB_ROLE_DEVICE; #endif #if CFG_TUH_ENABLED && defined(TUH_OPT_RHPORT) // init host stack CFG_TUSB_RHPORTx_MODE must be defined const tusb_rhport_init_t host_init = { - .rhport = TUH_OPT_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUH_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; - TU_ASSERT( tuh_rhport_init(&host_init) ); + TU_ASSERT( tuh_rhport_init(TUH_OPT_RHPORT, &host_init) ); _rhport_role[TUH_OPT_RHPORT] = TUSB_ROLE_HOST; #endif @@ -78,21 +76,21 @@ bool tusb_rhport_init(const tusb_rhport_init_t* rh_init) { #endif // new API with explicit rhport and role - TU_ASSERT(rh_init->rhport < TUP_USBIP_CONTROLLER_NUM && rh_init->role != TUSB_ROLE_INVALID); + TU_ASSERT(rhport < TUP_USBIP_CONTROLLER_NUM && rh_init->role != TUSB_ROLE_INVALID); #if CFG_TUD_ENABLED if (rh_init->role == TUSB_ROLE_DEVICE) { - TU_ASSERT( tud_rhport_init(rh_init) ); + TU_ASSERT(tud_rhport_init(rhport, rh_init)); } #endif #if CFG_TUH_ENABLED if (rh_init->role == TUSB_ROLE_HOST) { - TU_ASSERT( tuh_rhport_init(rh_init) ); + TU_ASSERT(tuh_rhport_init(rhport, rh_init)); } #endif - _rhport_role[rh_init->rhport] = rh_init->role; + _rhport_role[rhport] = rh_init->role; return true; } diff --git a/src/tusb.h b/src/tusb.h index c12abba8b..2f30a5739 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -134,20 +134,21 @@ #if CFG_TUH_ENABLED || CFG_TUD_ENABLED // Internal helper for backward compatible with tusb_init(void) -bool tusb_rhport_init(const tusb_rhport_init_t* rh_init); +bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Initialize roothub port with device/host role // Note: when using with RTOS, this should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. // Note2: defined as macro for backward compatible with tusb_init(void), can be changed to function in the future. #if defined(TUD_OPT_RHPORT) || defined(TUH_OPT_RHPORT) -#define _tusb_init_arg0() tusb_rhport_init(NULL) + #define _tusb_init_arg0() tusb_rhport_init(0, NULL) #else -#define _tusb_init_arg0() TU_VERIFY_STATIC(false, "CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE must be defined") + #define _tusb_init_arg0() TU_VERIFY_STATIC(false, "CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE must be defined") #endif -#define _tusb_init_arg1(_rh_init) tusb_rhport_init(_rh_init) -#define tusb_init(...) TU_FUNC_OPTIONAL_ARG(_tusb_init, __VA_ARGS__) +#define _tusb_init_arg1(_rhport) _tusb_init_arg0() +#define _tusb_init_arg2(_rhport, _rh_init) tusb_rhport_init(_rhport, _rh_init) +#define tusb_init(...) TU_FUNC_OPTIONAL_ARG(_tusb_init, __VA_ARGS__) // Check if stack is initialized bool tusb_inited(void); diff --git a/test/fuzz/dcd_fuzz.cc b/test/fuzz/dcd_fuzz.cc index 7ef0c7446..e76ae5087 100644 --- a/test/fuzz/dcd_fuzz.cc +++ b/test/fuzz/dcd_fuzz.cc @@ -46,7 +46,8 @@ tu_static State state = {false, 0, 0}; // All no-ops as we are fuzzing. //--------------------------------------------------------------------+ extern "C" { -void dcd_init(const tusb_rhport_init_t* rh_init) { +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + UNUSED(rhport); UNUSED(rh_init); return; } diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index 4033bf158..60fcdb41c 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -199,13 +199,12 @@ void setUp(void) if ( !tud_inited() ) { tusb_rhport_init_t dev_init = { - .rhport = 0, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - dcd_init_Expect(&dev_init); - tusb_init(&dev_init); + dcd_init_Expect(0, &dev_init); + tusb_init(0, &dev_init); } dcd_event_bus_reset(rhport, TUSB_SPEED_HIGH, false); diff --git a/test/unit-test/test/device/usbd/test_usbd.c b/test/unit-test/test/device/usbd/test_usbd.c index 8f900f656..598dac641 100644 --- a/test/unit-test/test/device/usbd/test_usbd.c +++ b/test/unit-test/test/device/usbd/test_usbd.c @@ -102,44 +102,38 @@ uint8_t const* desc_configuration; //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ -uint8_t const * tud_descriptor_device_cb(void) -{ +uint8_t const * tud_descriptor_device_cb(void) { return desc_device; } -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { return desc_configuration; } -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) -{ +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { (void) langid; return NULL; } -void setUp(void) -{ +void setUp(void) { dcd_int_disable_Ignore(); dcd_int_enable_Ignore(); if ( !tud_inited() ) { tusb_rhport_init_t dev_init = { - .rhport = 0, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; mscd_init_Expect(); - dcd_init_Expect(&dev_init); + dcd_init_Expect(0, &dev_init); - tusb_init(&dev_init); + tusb_init(0, &dev_init); } } -void tearDown(void) -{ +void tearDown(void) { } //--------------------------------------------------------------------+ -- cgit v1.3.1 From 9920ebff4ac5c5d60ca228897713a1c154ab6b57 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 7 Nov 2024 15:04:19 +0700 Subject: update bsp for h7 to support host mode --- examples/dual/host_hid_to_device_cdc/only.txt | 2 + examples/dual/host_info_to_device_cdc/only.txt | 3 +- examples/host/bare_api/only.txt | 3 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid/src/hid_app.c | 11 +- examples/host/cdc_msc_hid_freertos/only.txt | 3 + examples/host/device_info/only.txt | 3 + examples/host/hid_controller/only.txt | 3 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/stm32f7/boards/stm32f723disco/board.mk | 3 - hw/bsp/stm32h7/boards/daisyseed/board.cmake | 3 - hw/bsp/stm32h7/boards/daisyseed/board.h | 51 +++-- hw/bsp/stm32h7/boards/daisyseed/board.mk | 10 +- hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake | 3 - hw/bsp/stm32h7/boards/stm32h723nucleo/board.h | 55 ++++-- hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk | 12 +- hw/bsp/stm32h7/boards/stm32h743eval/board.cmake | 20 +- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 215 +++++++++------------ hw/bsp/stm32h7/boards/stm32h743eval/board.mk | 19 +- hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake | 3 - hw/bsp/stm32h7/boards/stm32h743nucleo/board.h | 61 ++++-- hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk | 12 +- hw/bsp/stm32h7/boards/stm32h745disco/board.cmake | 3 - hw/bsp/stm32h7/boards/stm32h745disco/board.h | 57 ++++-- hw/bsp/stm32h7/boards/stm32h745disco/board.mk | 7 +- hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake | 3 - hw/bsp/stm32h7/boards/stm32h750_weact/board.h | 49 +++-- hw/bsp/stm32h7/boards/stm32h750_weact/board.mk | 11 +- hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake | 3 - hw/bsp/stm32h7/boards/stm32h750bdk/board.h | 62 ++++-- hw/bsp/stm32h7/boards/stm32h750bdk/board.mk | 11 +- .../stm32h7/boards/waveshare_openh743i/board.cmake | 13 +- hw/bsp/stm32h7/boards/waveshare_openh743i/board.h | 60 ++++-- hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk | 16 +- hw/bsp/stm32h7/family.c | 93 +++++---- hw/bsp/stm32h7/family.cmake | 34 +++- hw/bsp/stm32h7/family.mk | 82 +++++--- 37 files changed, 571 insertions(+), 430 deletions(-) (limited to 'examples/host/bare_api') diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index 149ece856..3f40b4e7c 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -4,4 +4,6 @@ board:mcb1800 mcu:RP2040 mcu:ra6m5 mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 mcu:STM32H7 diff --git a/examples/dual/host_info_to_device_cdc/only.txt b/examples/dual/host_info_to_device_cdc/only.txt index f9db1db85..3f40b4e7c 100644 --- a/examples/dual/host_info_to_device_cdc/only.txt +++ b/examples/dual/host_info_to_device_cdc/only.txt @@ -4,5 +4,6 @@ board:mcb1800 mcu:RP2040 mcu:ra6m5 mcu:MAX3421 -mcu:STM32H7 +mcu:STM32F4 mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 2c88734d3..95f9f1d82 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -14,3 +14,4 @@ mcu:RAXXX mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 6bb3a2072..3f98ec89f 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -130,13 +130,12 @@ void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t cons //--------------------------------------------------------------------+ // look up new key in previous keys -static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) -{ - for(uint8_t i=0; i<6; i++) - { - if (report->keycode[i] == keycode) return true; +static inline bool find_key_in_report(hid_keyboard_report_t const* report, uint8_t keycode) { + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i] == keycode) { + return true; + } } - return false; } diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 1e0e60075..472745301 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -9,3 +9,6 @@ mcu:MIMXRT11XX mcu:MSP432E4 mcu:RX65X mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index aed9583b4..de21a54bd 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -14,3 +14,6 @@ mcu:RX65X mcu:RAXXX mcu:STM32H7 mcu:STM32F7 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index fee10f9e2..95f9f1d82 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -12,3 +12,6 @@ mcu:MSP432E4 mcu:RX65X mcu:RAXXX mcu:MAX3421 +mcu:STM32F4 +mcu:STM32F7 +mcu:STM32H7 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 2c88734d3..95f9f1d82 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -14,3 +14,4 @@ mcu:RAXXX mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 +mcu:STM32H7 diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk index c731323ca..eb6799eb0 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk @@ -4,9 +4,6 @@ RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED RHPORT_DEVICE ?= 1 RHPORT_HOST ?= 0 -PORT ?= 1 -SPEED ?= high - CFLAGS += \ -DSTM32F723xx \ -DHSE_VALUE=25000000 \ diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.cmake b/hw/bsp/stm32h7/boards/daisyseed/board.cmake index 4811c97e8..ff22b3e22 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.cmake +++ b/hw/bsp/stm32h7/boards/daisyseed/board.cmake @@ -8,8 +8,5 @@ function(update_board TARGET) STM32H750xx HSE_VALUE=16000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.h b/hw/bsp/stm32h7/boards/daisyseed/board.h index 532e3bfd5..2d681d640 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.h +++ b/hw/bsp/stm32h7/boards/daisyseed/board.h @@ -31,32 +31,46 @@ extern "C" { #endif -#define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_7 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ -static inline void SystemClock_Config(void) -{ +static inline void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 }; RCC_OscInitTypeDef RCC_OscInitStruct = { 0 }; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 }; @@ -128,11 +142,14 @@ static inline void SystemClock_Config(void) HAL_EnableCompensationCell(); } -static inline void board_init2(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.mk b/hw/bsp/stm32h7/boards/daisyseed/board.mk index da2eb4433..bb254cfc2 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.mk +++ b/hw/bsp/stm32h7/boards/daisyseed/board.mk @@ -1,16 +1,8 @@ +MCU_VARIANT = stm32h750xx CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=16000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s LD_FILE_GCC = $(BOARD_PATH)/stm32h750ibkx_flash.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h750ibk6_m7 diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake index b7d133dfa..a6f0a5c45 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake @@ -7,8 +7,5 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H723xx HSE_VALUE=8000000 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h index b3da1348f..c5257901d 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h @@ -31,20 +31,8 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 @@ -59,6 +47,40 @@ #define GPIO_AF10_OTG2_HS GPIO_AF10_OTG1_HS #define USB_OTG_FS USB_OTG_HS +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -118,11 +140,16 @@ static inline void SystemClock_Config(void) HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); } -static inline void board_init2(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk index 57a316f41..c1a98a025 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk @@ -1,15 +1,7 @@ +MCU_VARIANT = stm32h723xx CFLAGS += -DSTM32H723xx -DHSE_VALUE=8000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h723xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h723xx_flash.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h723xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h723xx_flash.icf +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash.ld # For flash-jlink target JLINK_DEVICE = stm32h723zg diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake index 2ff874690..6926b905a 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake @@ -4,12 +4,26 @@ set(JLINK_OPTION "-USB jtrace") set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${ST_MFXSTM32L152}/mfxstm32l152.c + ${ST_MFXSTM32L152}/mfxstm32l152_reg.c + ) + target_include_directories(${TARGET} PUBLIC + ${ST_MFXSTM32L152} + ) target_compile_definitions(${TARGET} PUBLIC STM32H743xx HSE_VALUE=25000000 - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 2e2d4aebd..fa9721be3 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -33,22 +33,9 @@ #include "mfxstm32l152.h" -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 - -// Tamper push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 0 - // Need to change jumper setting J7 and J8 from RS-232 to STLink #define UART_DEV USART1 #define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF4_USART1 -#define UART_TX_PIN GPIO_PIN_14 -#define UART_RX_PIN GPIO_PIN_15 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 @@ -60,13 +47,43 @@ {GPIOB, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_10}, {GPIOB, GPIO_PIN_11}, {GPIOB, GPIO_PIN_12}, \ {GPIOB, GPIO_PIN_13}, {GPIOC, GPIO_PIN_0 }, {GPIOH, GPIO_PIN_4 }, {GPIOI, GPIO_PIN_11} -/* Definition for I2C1 Pins */ -#define BUS_I2C1_SCL_PIN GPIO_PIN_6 -#define BUS_I2C1_SDA_PIN GPIO_PIN_7 -#define BUS_I2C1_SCL_GPIO_PORT GPIOB -#define BUS_I2C1_SDA_GPIO_PORT GPIOB -#define BUS_I2C1_SCL_AF GPIO_AF4_I2C1 -#define BUS_I2C1_SDA_AF GPIO_AF4_I2C1 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_14, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_15, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_USART1 }, + .active_state = 0 + }, + { // I2C SCL for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 0 + }, + { // I2C SDA for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 1 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -145,141 +162,91 @@ static inline void SystemClock_Config(void) { //--------------------------------------------------------------------+ // MFX //--------------------------------------------------------------------+ -I2C_HandleTypeDef hbus_i2c1 = { .Instance = I2C1}; +static I2C_HandleTypeDef i2c_handle = { + .Instance = I2C1, + .Init = { + .Timing = 0x10C0ECFF, + .OwnAddress1 = 0, + .AddressingMode = I2C_ADDRESSINGMODE_7BIT, + .DualAddressMode = I2C_DUALADDRESS_DISABLE, + .OwnAddress2 = 0, + .OwnAddress2Masks = I2C_OA2_NOMASK, + .GeneralCallMode = I2C_GENERALCALL_DISABLE, + .NoStretchMode = I2C_NOSTRETCH_DISABLE, + } +}; static MFXSTM32L152_Object_t mfx_obj = { 0 }; -static MFXSTM32L152_IO_Mode_t* mfx_io_drv = NULL; - -HAL_StatusTypeDef MX_I2C1_Init(I2C_HandleTypeDef* hI2c, uint32_t timing) { - hI2c->Init.Timing = timing; - hI2c->Init.OwnAddress1 = 0; - hI2c->Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT; - hI2c->Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; - hI2c->Init.OwnAddress2 = 0; - hI2c->Init.OwnAddress2Masks = I2C_OA2_NOMASK; - hI2c->Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; - hI2c->Init.NoStretchMode = I2C_NOSTRETCH_DISABLE; - - if (HAL_I2C_Init(hI2c) != HAL_OK) { +static MFXSTM32L152_IO_Mode_t* mfx_io = NULL; +static uint32_t mfx_vbus_pin[2] = { MFXSTM32L152_GPIO_PIN_7, MFXSTM32L152_GPIO_PIN_9 }; + +int32_t board_i2c_init(void) { + __HAL_RCC_I2C1_CLK_ENABLE(); + __HAL_RCC_I2C1_FORCE_RESET(); + __HAL_RCC_I2C1_RELEASE_RESET(); + if (HAL_I2C_Init(&i2c_handle) != HAL_OK) { return HAL_ERROR; } - if (HAL_I2CEx_ConfigAnalogFilter(hI2c, I2C_ANALOGFILTER_ENABLE) != HAL_OK) { + if (HAL_I2CEx_ConfigAnalogFilter(&i2c_handle, I2C_ANALOGFILTER_ENABLE) != HAL_OK) { return HAL_ERROR; } - if (HAL_I2CEx_ConfigDigitalFilter(hI2c, 0) != HAL_OK) { + if (HAL_I2CEx_ConfigDigitalFilter(&i2c_handle, 0) != HAL_OK) { return HAL_ERROR; } - - return HAL_OK; -} - -int32_t BSP_I2C1_Init(void) { - // Init I2C - GPIO_InitTypeDef gpio_init_structure; - gpio_init_structure.Pin = BUS_I2C1_SCL_PIN; - gpio_init_structure.Mode = GPIO_MODE_AF_OD; - gpio_init_structure.Pull = GPIO_NOPULL; - gpio_init_structure.Speed = GPIO_SPEED_FREQ_HIGH; - gpio_init_structure.Alternate = BUS_I2C1_SCL_AF; - HAL_GPIO_Init(BUS_I2C1_SCL_GPIO_PORT, &gpio_init_structure); - - gpio_init_structure.Pin = BUS_I2C1_SDA_PIN; - gpio_init_structure.Mode = GPIO_MODE_AF_OD; - gpio_init_structure.Pull = GPIO_NOPULL; - gpio_init_structure.Speed = GPIO_SPEED_FREQ_HIGH; - gpio_init_structure.Alternate = BUS_I2C1_SDA_AF; - HAL_GPIO_Init(BUS_I2C1_SDA_GPIO_PORT, &gpio_init_structure); - - __HAL_RCC_I2C1_CLK_ENABLE(); - __HAL_RCC_I2C1_FORCE_RESET(); - __HAL_RCC_I2C1_RELEASE_RESET(); - - if (MX_I2C1_Init(&hbus_i2c1, /*0x10C0ECFF*/ 1890596921) != HAL_OK) { - return -1; - } - return 0; } -int32_t BSP_I2C1_DeInit(void) { +int32_t board_i2c_deinit(void) { return 0; } -int32_t BSP_I2C1_ReadReg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { - if (HAL_OK != HAL_I2C_Mem_Read(&hbus_i2c1, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)) { - return -1; - } +int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } -int32_t BSP_I2C1_WriteReg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { - if(HAL_OK != HAL_I2C_Mem_Write(&hbus_i2c1, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)) { - return -1; - } +int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } - static inline void board_init2(void) { - // Init MFX IO expanding for vbus drive - BSP_I2C1_Init(); - - /* Configure the audio driver */ - MFXSTM32L152_IO_t IOCtx; - IOCtx.Init = BSP_I2C1_DeInit; - IOCtx.DeInit = BSP_I2C1_DeInit; - IOCtx.ReadReg = BSP_I2C1_ReadReg; - IOCtx.WriteReg = BSP_I2C1_WriteReg; - IOCtx.GetTick = (MFXSTM32L152_GetTick_Func) HAL_GetTick; - - uint8_t i2c_address[] = {0x84, 0x86}; + // IO control via MFX + MFXSTM32L152_IO_t io_ctx; + io_ctx.Init = board_i2c_init; + io_ctx.DeInit = board_i2c_deinit; + io_ctx.ReadReg = i2c_readreg; + io_ctx.WriteReg = i2c_writereg; + io_ctx.GetTick = (MFXSTM32L152_GetTick_Func) HAL_GetTick; + + uint16_t i2c_addr[] = { 0x84, 0x86 }; for(uint8_t i = 0U; i < 2U; i++) { uint32_t mfx_id; - IOCtx.Address = (uint16_t)i2c_address[i]; - if (MFXSTM32L152_RegisterBusIO(&mfx_obj, &IOCtx) != MFXSTM32L152_OK) { - return; - } - if (MFXSTM32L152_ReadID(&mfx_obj, &mfx_id) != MFXSTM32L152_OK) { - return; - } - + io_ctx.Address = i2c_addr[i]; + TU_ASSERT(MFXSTM32L152_RegisterBusIO(&mfx_obj, &io_ctx) == MFXSTM32L152_OK, ); + TU_ASSERT(MFXSTM32L152_ReadID(&mfx_obj, &mfx_id) == MFXSTM32L152_OK, ); if ((mfx_id == MFXSTM32L152_ID) || (mfx_id == MFXSTM32L152_ID_2)) { - if (MFXSTM32L152_Init(&mfx_obj) != MFXSTM32L152_OK) { - return; - } + TU_ASSERT(MFXSTM32L152_Init(&mfx_obj) == MFXSTM32L152_OK, ); break; } } - mfx_io_drv = &MFXSTM32L152_IO_Driver; + mfx_io = &MFXSTM32L152_IO_Driver; + mfx_io->IO_Start(&mfx_obj, MFXSTM32L152_GPIO_PINS_ALL); - static MFXSTM32L152_IO_Init_t io_init = { 0 }; - mfx_io_drv->Init(&mfx_obj, &io_init); - - io_init.Pin = MFXSTM32L152_GPIO_PIN_7; - io_init.Mode = MFXSTM32L152_GPIO_MODE_OUTPUT_PP; - io_init.Pull = MFXSTM32L152_GPIO_PULLUP; - mfx_io_drv->Init(&mfx_obj, &io_init); // VBUS[0] - - io_init.Pin = MFXSTM32L152_GPIO_PIN_9; - mfx_io_drv->Init(&mfx_obj, &io_init); // VBUS[1] - -#if 1 // write then read IO7 but it does not seems to change value - int32_t pin_value; - pin_value = mfx_io_drv->IO_ReadPin(&mfx_obj, MFXSTM32L152_GPIO_PIN_7); - TU_LOG1_INT(pin_value); - - mfx_io_drv->IO_WritePin(&mfx_obj, MFXSTM32L152_GPIO_PIN_7, 1); - - pin_value = mfx_io_drv->IO_ReadPin(&mfx_obj, MFXSTM32L152_GPIO_PIN_7); - TU_LOG1_INT(pin_value); -#endif + for(uint32_t i=0; i<2; i++) { + MFXSTM32L152_IO_Init_t io_init = { + .Pin = mfx_vbus_pin[i], + .Mode = MFXSTM32L152_GPIO_MODE_OUTPUT_PP, + .Pull = MFXSTM32L152_GPIO_PULLUP, + }; + mfx_io->Init(&mfx_obj, &io_init); + } } -// vbus drive +// VBUS1 is actually controlled by USB3320C PHY (using dwc2 drivebus signal) void board_vbus_set(uint8_t rhport, bool state) { - if ( mfx_io_drv ) { - uint32_t io_pin = (_rhport) ? MFXSTM32L152_GPIO_PIN_9 : MFXSTM32L152_GPIO_PIN_7; - mfx_io_drv->IO_WritePin(&Io_CompObj, io_pin, _on); + if (mfx_io) { + mfx_io->IO_WritePin(&mfx_obj, mfx_vbus_pin[rhport], state); } } diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.mk b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk index 36882a0e5..67b403932 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk @@ -1,16 +1,17 @@ +MCU_VARIANT = stm32h743xx CFLAGS += -DSTM32H743xx -DHSE_VALUE=25000000 -# Default is Highspeed port -PORT ?= 1 -SPEED ?= high +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf +SRC_C += \ + ${ST_MFXSTM32L152}/mfxstm32l152.c \ + ${ST_MFXSTM32L152}/mfxstm32l152_reg.c \ + +INC += $(TOP)/${ST_MFXSTM32L152} # For flash-jlink target JLINK_DEVICE = stm32h743xi diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake index f1532a95f..021799775 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake @@ -7,8 +7,5 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H743xx HSE_VALUE=8000000 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h index 513ce2bb7..0606f395a 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h @@ -31,25 +31,47 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -100,8 +122,7 @@ static inline void SystemClock_Config(void) { RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) - { + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { Error_Handler(); } @@ -116,17 +137,21 @@ static inline void SystemClock_Config(void) { PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_3; PeriphClkInitStruct.PLL3.PLL3FRACN = 0; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) - { + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { Error_Handler(); } } -static inline void board_init2(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} #ifdef __cplusplus } diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk index f641b77aa..d904de6d2 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk @@ -1,15 +1,7 @@ +MCU_VARIANT = stm32h743xx CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf +LD_FILE_GCC = $(FAMILY_PATH)/linker/${MCU_VARIANT}_flash.ld # For flash-jlink target JLINK_DEVICE = stm32h743zi diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake index f1313d54e..39a9d5798 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake @@ -9,8 +9,5 @@ function(update_board TARGET) STM32H745xx HSE_VALUE=25000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/hw/bsp/stm32h7/boards/stm32h745disco/board.h index c0f85ddbe..b9d9cdea4 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.h +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.h @@ -31,27 +31,48 @@ extern "C" { #endif -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOJ, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_5, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -127,11 +148,17 @@ static inline void SystemClock_Config(void) HAL_EnableCompensationCell(); } -static inline void board_init2(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk index 9c3615f05..588620ce2 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk @@ -1,17 +1,12 @@ # STM32H745I-DISCO uses OTG_FS # FIXME: Reset enumerates, un/replug USB plug does not enumerate - +MCU_VARIANT = stm32h745xx CFLAGS += -DSTM32H745xx -DCORE_CM7 -DHSE_VALUE=25000000 # Default is FulSpeed port PORT ?= 0 -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s LD_FILE_GCC = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h745xx_flash_CM7.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h745xx.s LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h745xx_flash_CM7.icf # For flash-jlink target diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake index 6303ca462..6eab26c07 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake @@ -9,8 +9,5 @@ function(update_board TARGET) STM32H750xx HSE_VALUE=25000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h index 5beab20ce..f1c363082 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h @@ -31,27 +31,42 @@ extern "C" { #endif -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_3 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART -//#define UART_DEV USART3 -//#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -//#define UART_GPIO_PORT GPIOB -//#define UART_GPIO_AF GPIO_AF7_USART3 -//#define UART_TX_PIN GPIO_PIN_10 -//#define UART_RX_PIN GPIO_PIN_11 +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOE, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + } +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -125,6 +140,10 @@ static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk index a50172cb0..988fed804 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk @@ -1,19 +1,10 @@ # STM32H745I-DISCO uses OTG_FS # FIXME: Reset enumerates, un/replug USB plug does not enumerate - +MCU_VARIANT = stm32h750xx CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=25000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s LD_FILE_GCC = $(BOARD_PATH)/stm32h750xx_flash_CM7.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h750vb diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake index e87be8255..72a139ab6 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake @@ -9,8 +9,5 @@ function(update_board TARGET) STM32H750xx HSE_VALUE=25000000 CORE_CM7 - # default to PORT 0 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h index b0b063cda..2895f0973 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h @@ -31,33 +31,47 @@ extern "C" { #endif -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - // UART #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 #define OTG_HS_VBUS_SENSE 0 -// USB HS External PHY Pin: CLK, STP, DIR, NXT, D0-D7 -#define ULPI_PINS \ - {GPIOA, GPIO_PIN_3 }, {GPIOA, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_0 }, {GPIOB, GPIO_PIN_1 }, \ - {GPIOB, GPIO_PIN_5 }, {GPIOB, GPIO_PIN_10}, {GPIOB, GPIO_PIN_11}, {GPIOB, GPIO_PIN_12}, \ - {GPIOB, GPIO_PIN_13}, {GPIOC, GPIO_PIN_0 }, {GPIOH, GPIO_PIN_4 }, {GPIOI, GPIO_PIN_11} - +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_VBUS0_EN 4 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOJ, + .pin_init = { .Pin = GPIO_PIN_2, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // VBUS0 EN + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_5, .Mode = GPIO_MODE_OUTPUT_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + } +}; //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -132,11 +146,17 @@ static inline void SystemClock_Config(void) HAL_EnableCompensationCell(); } -static inline void board_init2(void) -{ +static inline void board_init2(void) { // For this board does nothing } +void board_vbus_set(uint8_t rhport, bool state) { + if (rhport == 0) { + board_pindef_t* pindef = &board_pindef[PINID_VBUS0_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk index 923c90753..6eb3eb498 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk @@ -1,19 +1,10 @@ # STM32H745I-DISCO uses OTG_FS # FIXME: Reset enumerates, un/replug USB plug does not enumerate - +MCU_VARIANT = stm32h750xx CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=25000000 -# Default is FulSpeed port -PORT ?= 0 - -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s LD_FILE_GCC = $(BOARD_PATH)/stm32h750xx_flash_CM7.ld -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h750xb diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake index 83c8d4833..3aaa81612 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake @@ -3,14 +3,21 @@ set(JLINK_DEVICE stm32h743xi) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld) +set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) + +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H743xx HSE_VALUE=8000000 HAL_TIM_MODULE_ENABLED - # default to PORT 1 High Speed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) target_sources(${TARGET} PUBLIC ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_tim.c diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h index 46efca6fb..625c6a137 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h @@ -70,22 +70,9 @@ extern "C" { #endif -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_6 -#define LED_STATE_ON 1 - -// Tamper push-button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - // Need to change jumper setting J7 and J8 from RS-232 to STLink #define UART_DEV USART3 #define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 // VBUS Sense detection #define OTG_FS_VBUS_SENSE 1 @@ -101,6 +88,45 @@ #define ULPI_RST_PORT GPIOD #define ULPI_RST_PIN GPIO_PIN_14 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 + +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOD, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF7_USART3 }, + .active_state = 0 + }, + + { // I2C SCL for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_6, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 0 + }, + { // I2C SDA for MFX VBUS + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_7, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_HIGH, .Alternate = GPIO_AF4_I2C1 }, + .active_state = 1 + }, +}; + //--------------------------------------------------------------------+ // RCC Clock //--------------------------------------------------------------------+ @@ -178,8 +204,7 @@ static inline void SystemClock_Config(void) static inline void timer_board_delay(TIM_HandleTypeDef* tim_hdl, uint32_t ms) { uint32_t startMs = __HAL_TIM_GET_COUNTER(tim_hdl); - while ((__HAL_TIM_GET_COUNTER(tim_hdl) - startMs) < ms) - { + while ((__HAL_TIM_GET_COUNTER(tim_hdl) - startMs) < ms) { asm("nop"); //do nothing } } @@ -230,6 +255,11 @@ static inline void board_init2(void) __HAL_RCC_TIM2_CLK_DISABLE(); } +// need to short a jumper +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk index cea4bfacb..5ff2f4165 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk @@ -1,7 +1,11 @@ +MCU_VARIANT = stm32h743xx CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000 -# Default is HS port -PORT ?= 1 +RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 + +LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld # Use Timer module for ULPI PHY reset CFLAGS += -DHAL_TIM_MODULE_ENABLED @@ -9,14 +13,6 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim_ex.c -# GCC -SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s -LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld - -# IAR -SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf - # For flash-jlink target JLINK_DEVICE = stm32h743ii diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 27e7d0a49..0be18350c 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -31,7 +31,12 @@ #include "bsp/board_api.h" TU_ATTR_UNUSED static void Error_Handler(void) { } -void board_vbus_set(uint8_t rhport, bool state) TU_ATTR_WEAK; + +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; #include "board.h" @@ -39,7 +44,20 @@ void board_vbus_set(uint8_t rhport, bool state) TU_ATTR_WEAK; // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler @@ -60,8 +78,6 @@ void OTG_HS_IRQHandler(void) { #ifdef TRACE_ETM void trace_etm_init(void) { // H7 trace pin is PE2 to PE6 - // __HAL_RCC_GPIOE_CLK_ENABLE(); - GPIO_InitTypeDef gpio_init; gpio_init.Pin = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6; gpio_init.Mode = GPIO_MODE_AF_PP; @@ -83,20 +99,24 @@ void board_init(void) { // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); // USB ULPI NXT - __HAL_RCC_GPIOC_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE(); __HAL_RCC_GPIOE_CLK_ENABLE(); __HAL_RCC_GPIOF_CLK_ENABLE(); __HAL_RCC_GPIOG_CLK_ENABLE(); - __HAL_RCC_GPIOH_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOH_CLK_ENABLE(); #ifdef __HAL_RCC_GPIOI_CLK_ENABLE - __HAL_RCC_GPIOI_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOI_CLK_ENABLE(); #endif __HAL_RCC_GPIOJ_CLK_ENABLE(); trace_etm_init(); + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } + #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -115,39 +135,8 @@ void board_init(void) { GPIO_InitTypeDef GPIO_InitStruct; - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - #ifdef UART_DEV - // Uart UART_CLK_EN(); - - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); #endif @@ -237,8 +226,7 @@ void board_init(void) { HAL_PWREx_EnableUSBVoltageDetector(); - // For waveshare openh743 ULPI PHY reset walkaround - board_init2(); + board_init2(); // optional init #if CFG_TUH_ENABLED board_vbus_set(BOARD_TUH_RHPORT, 1); @@ -251,12 +239,22 @@ void board_init(void) { //--------------------------------------------------------------------+ void board_led_write(bool state) { - GPIO_PinState pin_state = (GPIO_PinState)(state ? LED_STATE_ON : (1 - LED_STATE_ON)); - HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif } uint32_t board_button_read(void) { - return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif } size_t board_get_unique_id(uint8_t id[], size_t max_len) { @@ -282,14 +280,13 @@ int board_uart_write(void const *buf, int len) { #ifdef UART_DEV HAL_UART_Transmit(&UartHandle, (uint8_t * )(uintptr_t) buf, len, 0xffff); + return len; #else - (void) buf; + (void) buf; (void) len; + return -1; #endif - - return len; } - #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index d0fb963a9..69e29a20d 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -5,7 +5,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) -set(MFXSTM32L152 ${TOP}/hw/mcu/st/stm32-mfxstm32l152) +set(ST_MFXSTM32L152 ${TOP}/hw/mcu/st/stm32-mfxstm32l152) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # include board specific @@ -17,6 +17,26 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +if (NOT DEFINED RHPORT_SPEED) + # Most F7 does not has built-in HS PHY + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () #------------------------------------ # BOARD_TARGET @@ -52,19 +72,19 @@ function(add_board_target BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - # MFXSTM32L152 - ${MFXSTM32L152}/mfxstm32l152.c - ${MFXSTM32L152}/mfxstm32l152_reg.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMSIS_5}/CMSIS/Core/Include ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc - ${MFXSTM32L152} ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) update_board(${BOARD_TARGET}) diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index d46324a2d..29b83cf7d 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -1,31 +1,48 @@ -UF2_FAMILY_ID = 0x6db66082 ST_FAMILY = h7 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - +ST_PREFIX = stm32${ST_FAMILY}xx ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver +ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver +ST_MFXSTM32L152 = hw/mcu/st/stm32-mfxstm32l152 + +UF2_FAMILY_ID = 0x6db66082 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m7 +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_FULL_SPEED +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + # -------------- # Compiler Flags # -------------- CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_TUD_RHPORT=$(PORT) - -ifeq ($(PORT), 1) - ifeq ($(SPEED), high) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - $(info "Using OTG_HS in HighSpeed mode") - else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - $(info "Using OTG_HS in FullSpeed mode") - endif -else - $(info "Using OTG_FS") -endif + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ # GCC Flags CFLAGS_GCC += \ @@ -48,20 +65,29 @@ SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ src/portable/synopsys/dwc2/hcd_dwc2.c \ src/portable/synopsys/dwc2/dwc2_common.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c \ + $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_dma.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c \ + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c \ + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart_ex.c \ INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s + +# Linker +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf -- cgit v1.3.1 From c8130afe9bb7365adc076c98059b869bfcaf2ecf Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 Jan 2025 15:09:13 +0700 Subject: bump up cmake min to 3.20 --- examples/CMakeLists.txt | 2 +- examples/device/CMakeLists.txt | 2 +- examples/device/audio_4_channel_mic/CMakeLists.txt | 2 +- examples/device/audio_4_channel_mic_freertos/CMakeLists.txt | 2 +- examples/device/audio_test/CMakeLists.txt | 2 +- examples/device/audio_test_freertos/CMakeLists.txt | 2 +- examples/device/audio_test_multi_rate/CMakeLists.txt | 2 +- examples/device/board_test/CMakeLists.txt | 2 +- examples/device/cdc_dual_ports/CMakeLists.txt | 2 +- examples/device/cdc_msc/CMakeLists.txt | 2 +- examples/device/cdc_msc_freertos/CMakeLists.txt | 2 +- examples/device/cdc_uac2/CMakeLists.txt | 2 +- examples/device/dfu/CMakeLists.txt | 2 +- examples/device/dfu_runtime/CMakeLists.txt | 2 +- examples/device/dynamic_configuration/CMakeLists.txt | 2 +- examples/device/hid_boot_interface/CMakeLists.txt | 2 +- examples/device/hid_composite/CMakeLists.txt | 2 +- examples/device/hid_composite_freertos/CMakeLists.txt | 2 +- examples/device/hid_generic_inout/CMakeLists.txt | 2 +- examples/device/hid_multiple_interface/CMakeLists.txt | 2 +- examples/device/midi_test/CMakeLists.txt | 2 +- examples/device/midi_test_freertos/CMakeLists.txt | 2 +- examples/device/msc_dual_lun/CMakeLists.txt | 2 +- examples/device/net_lwip_webserver/CMakeLists.txt | 2 +- examples/device/uac2_headset/CMakeLists.txt | 2 +- examples/device/uac2_speaker_fb/CMakeLists.txt | 2 +- examples/device/usbtmc/CMakeLists.txt | 2 +- examples/device/video_capture/CMakeLists.txt | 2 +- examples/device/video_capture_2ch/CMakeLists.txt | 2 +- examples/device/webusb_serial/CMakeLists.txt | 2 +- examples/dual/CMakeLists.txt | 2 +- examples/dual/host_hid_to_device_cdc/CMakeLists.txt | 2 +- examples/dual/host_info_to_device_cdc/CMakeLists.txt | 2 +- examples/host/CMakeLists.txt | 2 +- examples/host/bare_api/CMakeLists.txt | 2 +- examples/host/cdc_msc_hid/CMakeLists.txt | 2 +- examples/host/cdc_msc_hid_freertos/CMakeLists.txt | 2 +- examples/host/device_info/CMakeLists.txt | 2 +- examples/host/hid_controller/CMakeLists.txt | 2 +- examples/host/msc_file_explorer/CMakeLists.txt | 2 +- examples/typec/CMakeLists.txt | 2 +- examples/typec/power_delivery/CMakeLists.txt | 2 +- pkg.yml | 2 +- src/CMakeLists.txt | 2 +- 44 files changed, 44 insertions(+), 44 deletions(-) (limited to 'examples/host/bare_api') diff --git a/examples/CMakeLists.txt b/examples/CMakeLists.txt index c603d0c22..d34c6ed5d 100644 --- a/examples/CMakeLists.txt +++ b/examples/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) #set(CMAKE_EXPORT_COMPILE_COMMANDS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../hw/bsp/family_support.cmake) diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index 26a808a21..bb7dd0a0f 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index 0f5d36193..c8086ae46 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt index 285d4490b..c50d4fef7 100644 --- a/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index f61e1b640..6a7e68c3d 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_test_freertos/CMakeLists.txt b/examples/device/audio_test_freertos/CMakeLists.txt index 33f3b915f..6ce9e72fe 100644 --- a/examples/device/audio_test_freertos/CMakeLists.txt +++ b/examples/device/audio_test_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt index f61e1b640..6a7e68c3d 100644 --- a/examples/device/audio_test_multi_rate/CMakeLists.txt +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index 012eff095..837b4996a 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index f61e1b640..6a7e68c3d 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index c2f9cb095..fa7090807 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) #set_property(GLOBAL PROPERTY USE_FOLDERS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index 32a9e2930..f7636a07a 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/cdc_uac2/CMakeLists.txt b/examples/device/cdc_uac2/CMakeLists.txt index 64e4374e9..c8c797637 100644 --- a/examples/device/cdc_uac2/CMakeLists.txt +++ b/examples/device/cdc_uac2/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index 2b20d2234..8a62d6ba2 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt index 33f3b915f..6ce9e72fe 100644 --- a/examples/device/hid_composite_freertos/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index a01eb3456..3da8ee3df 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index f61e1b640..6a7e68c3d 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/midi_test_freertos/CMakeLists.txt b/examples/device/midi_test_freertos/CMakeLists.txt index 33f3b915f..6ce9e72fe 100644 --- a/examples/device/midi_test_freertos/CMakeLists.txt +++ b/examples/device/midi_test_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index e69fead35..58a7bd30b 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 13923b583..87b92f4dc 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_LIST_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index e92a57148..ced98a909 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/uac2_speaker_fb/CMakeLists.txt b/examples/device/uac2_speaker_fb/CMakeLists.txt index f40ca8716..0ed3db646 100644 --- a/examples/device/uac2_speaker_fb/CMakeLists.txt +++ b/examples/device/uac2_speaker_fb/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index a63ca2d81..d2deb72d5 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index 80dc39ca5..90788fa60 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/video_capture_2ch/CMakeLists.txt b/examples/device/video_capture_2ch/CMakeLists.txt index 80dc39ca5..90788fa60 100644 --- a/examples/device/video_capture_2ch/CMakeLists.txt +++ b/examples/device/video_capture_2ch/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index e92a57148..ced98a909 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt index f11074e93..c5e3ffce4 100644 --- a/examples/dual/CMakeLists.txt +++ b/examples/dual/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index 54e36e3d3..6ae5b5766 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/dual/host_info_to_device_cdc/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/CMakeLists.txt index 54e36e3d3..6ae5b5766 100644 --- a/examples/dual/host_info_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_info_to_device_cdc/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index 793f6ab08..175646830 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 76182d6fa..0efe84b60 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index a7c372a34..e8928cda5 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt index b4004f8d7..78b2784fe 100644 --- a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt +++ b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/device_info/CMakeLists.txt b/examples/host/device_info/CMakeLists.txt index 6a16155ec..33953233d 100644 --- a/examples/host/device_info/CMakeLists.txt +++ b/examples/host/device_info/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index c1b500dd8..fb5faf210 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 1a57c7466..5ac75c04a 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/typec/CMakeLists.txt b/examples/typec/CMakeLists.txt index c7641494e..24c25908a 100644 --- a/examples/typec/CMakeLists.txt +++ b/examples/typec/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) diff --git a/examples/typec/power_delivery/CMakeLists.txt b/examples/typec/power_delivery/CMakeLists.txt index 012eff095..837b4996a 100644 --- a/examples/typec/power_delivery/CMakeLists.txt +++ b/examples/typec/power_delivery/CMakeLists.txt @@ -1,4 +1,4 @@ -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/pkg.yml b/pkg.yml index 331445024..841307847 100644 --- a/pkg.yml +++ b/pkg.yml @@ -1,5 +1,5 @@ pkg.name: tinyusb -pkg.description: A silly USB stack for embedded +pkg.description: An open source cross-platform USB stack for embedded system pkg.author: "Ha Thach " pkg.homepage: "https://github.com/hathach/tinyusb" pkg.keywords: diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index cf6878389..e8488166e 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -2,7 +2,7 @@ # Usage: requires target tinyusb_config which expose tusb_config.h file # TINYUSB_TARGET_PREFIX and TINYUSB_TARGET_SUFFIX can be used to change the name of the target -cmake_minimum_required(VERSION 3.17) +cmake_minimum_required(VERSION 3.20) # Add tinyusb to a target, if user don't want to compile tinyusb as a library function(add_tinyusb TARGET) -- cgit v1.3.1 From 09bce3532c9279b54f5dc1e48c51959344df6c56 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 9 Feb 2025 00:04:16 +0100 Subject: Add CMake presets. Signed-off-by: HiFiPhile --- .gitignore | 8 +- examples/CMakePresets.json | 6 + examples/device/CMakePresets.json | 6 + .../device/audio_4_channel_mic/CMakePresets.json | 6 + .../audio_4_channel_mic_freertos/CMakePresets.json | 6 + .../src/CMakePresets.json | 6 + examples/device/audio_test/CMakePresets.json | 6 + .../device/audio_test_freertos/CMakePresets.json | 6 + .../audio_test_freertos/src/CMakePresets.json | 6 + .../device/audio_test_multi_rate/CMakePresets.json | 6 + examples/device/board_test/CMakePresets.json | 6 + examples/device/board_test/src/CMakePresets.json | 6 + examples/device/cdc_dual_ports/CMakePresets.json | 6 + examples/device/cdc_msc/CMakePresets.json | 6 + examples/device/cdc_msc_freertos/CMakePresets.json | 6 + .../device/cdc_msc_freertos/src/CMakePresets.json | 6 + examples/device/cdc_uac2/CMakePresets.json | 6 + examples/device/dfu/CMakePresets.json | 6 + examples/device/dfu_runtime/CMakePresets.json | 6 + .../device/dynamic_configuration/CMakePresets.json | 6 + .../device/hid_boot_interface/CMakePresets.json | 6 + examples/device/hid_composite/CMakePresets.json | 6 + .../hid_composite_freertos/CMakePresets.json | 6 + .../hid_composite_freertos/src/CMakePresets.json | 6 + .../device/hid_generic_inout/CMakePresets.json | 6 + .../hid_multiple_interface/CMakePresets.json | 6 + examples/device/midi_test/CMakePresets.json | 6 + .../device/midi_test_freertos/CMakePresets.json | 6 + .../midi_test_freertos/src/CMakePresets.json | 6 + examples/device/msc_dual_lun/CMakePresets.json | 6 + .../device/net_lwip_webserver/CMakePresets.json | 6 + examples/device/uac2_headset/CMakePresets.json | 6 + examples/device/uac2_speaker_fb/CMakePresets.json | 6 + examples/device/usbtmc/CMakePresets.json | 6 + examples/device/video_capture/CMakePresets.json | 6 + .../device/video_capture/src/CMakePresets.json | 6 + .../device/video_capture_2ch/CMakePresets.json | 6 + .../device/video_capture_2ch/src/CMakePresets.json | 6 + examples/device/webusb_serial/CMakePresets.json | 6 + examples/dual/CMakePresets.json | 6 + .../dual/host_hid_to_device_cdc/CMakePresets.json | 6 + .../dual/host_info_to_device_cdc/CMakePresets.json | 6 + examples/host/CMakePresets.json | 6 + examples/host/bare_api/CMakePresets.json | 6 + examples/host/cdc_msc_hid/CMakePresets.json | 6 + .../host/cdc_msc_hid_freertos/CMakePresets.json | 6 + .../cdc_msc_hid_freertos/src/CMakePresets.json | 6 + examples/host/device_info/CMakePresets.json | 6 + examples/host/device_info/src/CMakePresets.json | 6 + examples/host/hid_controller/CMakePresets.json | 6 + examples/host/msc_file_explorer/CMakePresets.json | 6 + examples/typec/CMakePresets.json | 6 + examples/typec/power_delivery/CMakePresets.json | 6 + hw/bsp/BoardPresets.json | 4002 ++++++++++++++++++++ hw/bsp/family_support.cmake | 6 +- tools/gen_presets.py | 91 + 56 files changed, 4417 insertions(+), 2 deletions(-) create mode 100644 examples/CMakePresets.json create mode 100644 examples/device/CMakePresets.json create mode 100644 examples/device/audio_4_channel_mic/CMakePresets.json create mode 100644 examples/device/audio_4_channel_mic_freertos/CMakePresets.json create mode 100644 examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json create mode 100644 examples/device/audio_test/CMakePresets.json create mode 100644 examples/device/audio_test_freertos/CMakePresets.json create mode 100644 examples/device/audio_test_freertos/src/CMakePresets.json create mode 100644 examples/device/audio_test_multi_rate/CMakePresets.json create mode 100644 examples/device/board_test/CMakePresets.json create mode 100644 examples/device/board_test/src/CMakePresets.json create mode 100644 examples/device/cdc_dual_ports/CMakePresets.json create mode 100644 examples/device/cdc_msc/CMakePresets.json create mode 100644 examples/device/cdc_msc_freertos/CMakePresets.json create mode 100644 examples/device/cdc_msc_freertos/src/CMakePresets.json create mode 100644 examples/device/cdc_uac2/CMakePresets.json create mode 100644 examples/device/dfu/CMakePresets.json create mode 100644 examples/device/dfu_runtime/CMakePresets.json create mode 100644 examples/device/dynamic_configuration/CMakePresets.json create mode 100644 examples/device/hid_boot_interface/CMakePresets.json create mode 100644 examples/device/hid_composite/CMakePresets.json create mode 100644 examples/device/hid_composite_freertos/CMakePresets.json create mode 100644 examples/device/hid_composite_freertos/src/CMakePresets.json create mode 100644 examples/device/hid_generic_inout/CMakePresets.json create mode 100644 examples/device/hid_multiple_interface/CMakePresets.json create mode 100644 examples/device/midi_test/CMakePresets.json create mode 100644 examples/device/midi_test_freertos/CMakePresets.json create mode 100644 examples/device/midi_test_freertos/src/CMakePresets.json create mode 100644 examples/device/msc_dual_lun/CMakePresets.json create mode 100644 examples/device/net_lwip_webserver/CMakePresets.json create mode 100644 examples/device/uac2_headset/CMakePresets.json create mode 100644 examples/device/uac2_speaker_fb/CMakePresets.json create mode 100644 examples/device/usbtmc/CMakePresets.json create mode 100644 examples/device/video_capture/CMakePresets.json create mode 100644 examples/device/video_capture/src/CMakePresets.json create mode 100644 examples/device/video_capture_2ch/CMakePresets.json create mode 100644 examples/device/video_capture_2ch/src/CMakePresets.json create mode 100644 examples/device/webusb_serial/CMakePresets.json create mode 100644 examples/dual/CMakePresets.json create mode 100644 examples/dual/host_hid_to_device_cdc/CMakePresets.json create mode 100644 examples/dual/host_info_to_device_cdc/CMakePresets.json create mode 100644 examples/host/CMakePresets.json create mode 100644 examples/host/bare_api/CMakePresets.json create mode 100644 examples/host/cdc_msc_hid/CMakePresets.json create mode 100644 examples/host/cdc_msc_hid_freertos/CMakePresets.json create mode 100644 examples/host/cdc_msc_hid_freertos/src/CMakePresets.json create mode 100644 examples/host/device_info/CMakePresets.json create mode 100644 examples/host/device_info/src/CMakePresets.json create mode 100644 examples/host/hid_controller/CMakePresets.json create mode 100644 examples/host/msc_file_explorer/CMakePresets.json create mode 100644 examples/typec/CMakePresets.json create mode 100644 examples/typec/power_delivery/CMakePresets.json create mode 100644 hw/bsp/BoardPresets.json create mode 100755 tools/gen_presets.py (limited to 'examples/host/bare_api') diff --git a/.gitignore b/.gitignore index 010b5c9ed..f981110b2 100644 --- a/.gitignore +++ b/.gitignore @@ -37,4 +37,10 @@ cmake-build-* sdkconfig .PVS-Studio .vscode/ -build/ +build +CMakeFiles +Debug +RelWithDebInfo +Release +BrowseInfo +.cmake_build diff --git a/examples/CMakePresets.json b/examples/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/CMakePresets.json b/examples/device/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic/CMakePresets.json b/examples/device/audio_4_channel_mic/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic_freertos/CMakePresets.json b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json b/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_4_channel_mic_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test/CMakePresets.json b/examples/device/audio_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_freertos/CMakePresets.json b/examples/device/audio_test_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_freertos/src/CMakePresets.json b/examples/device/audio_test_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/audio_test_multi_rate/CMakePresets.json b/examples/device/audio_test_multi_rate/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/audio_test_multi_rate/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/board_test/CMakePresets.json b/examples/device/board_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/board_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/board_test/src/CMakePresets.json b/examples/device/board_test/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/board_test/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_dual_ports/CMakePresets.json b/examples/device/cdc_dual_ports/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_dual_ports/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc/CMakePresets.json b/examples/device/cdc_msc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc_freertos/CMakePresets.json b/examples/device/cdc_msc_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_msc_freertos/src/CMakePresets.json b/examples/device/cdc_msc_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_msc_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/cdc_uac2/CMakePresets.json b/examples/device/cdc_uac2/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/cdc_uac2/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dfu/CMakePresets.json b/examples/device/dfu/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dfu/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dfu_runtime/CMakePresets.json b/examples/device/dfu_runtime/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dfu_runtime/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/dynamic_configuration/CMakePresets.json b/examples/device/dynamic_configuration/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/dynamic_configuration/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_boot_interface/CMakePresets.json b/examples/device/hid_boot_interface/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_boot_interface/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite/CMakePresets.json b/examples/device/hid_composite/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite_freertos/CMakePresets.json b/examples/device/hid_composite_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_composite_freertos/src/CMakePresets.json b/examples/device/hid_composite_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_composite_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_generic_inout/CMakePresets.json b/examples/device/hid_generic_inout/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_generic_inout/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/hid_multiple_interface/CMakePresets.json b/examples/device/hid_multiple_interface/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/hid_multiple_interface/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test/CMakePresets.json b/examples/device/midi_test/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test_freertos/CMakePresets.json b/examples/device/midi_test_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/midi_test_freertos/src/CMakePresets.json b/examples/device/midi_test_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/midi_test_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/msc_dual_lun/CMakePresets.json b/examples/device/msc_dual_lun/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/msc_dual_lun/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/net_lwip_webserver/CMakePresets.json b/examples/device/net_lwip_webserver/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/net_lwip_webserver/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/uac2_headset/CMakePresets.json b/examples/device/uac2_headset/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/uac2_headset/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/uac2_speaker_fb/CMakePresets.json b/examples/device/uac2_speaker_fb/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/uac2_speaker_fb/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/usbtmc/CMakePresets.json b/examples/device/usbtmc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/usbtmc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture/CMakePresets.json b/examples/device/video_capture/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture/src/CMakePresets.json b/examples/device/video_capture/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture_2ch/CMakePresets.json b/examples/device/video_capture_2ch/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture_2ch/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/video_capture_2ch/src/CMakePresets.json b/examples/device/video_capture_2ch/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/video_capture_2ch/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/device/webusb_serial/CMakePresets.json b/examples/device/webusb_serial/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/device/webusb_serial/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/CMakePresets.json b/examples/dual/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/host_hid_to_device_cdc/CMakePresets.json b/examples/dual/host_hid_to_device_cdc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/host_hid_to_device_cdc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/dual/host_info_to_device_cdc/CMakePresets.json b/examples/dual/host_info_to_device_cdc/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/CMakePresets.json b/examples/host/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/bare_api/CMakePresets.json b/examples/host/bare_api/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/bare_api/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid/CMakePresets.json b/examples/host/cdc_msc_hid/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid_freertos/CMakePresets.json b/examples/host/cdc_msc_hid_freertos/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json b/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/device_info/CMakePresets.json b/examples/host/device_info/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/device_info/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/device_info/src/CMakePresets.json b/examples/host/device_info/src/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/device_info/src/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/hid_controller/CMakePresets.json b/examples/host/hid_controller/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/hid_controller/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/host/msc_file_explorer/CMakePresets.json b/examples/host/msc_file_explorer/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/host/msc_file_explorer/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/typec/CMakePresets.json b/examples/typec/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/typec/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/examples/typec/power_delivery/CMakePresets.json b/examples/typec/power_delivery/CMakePresets.json new file mode 100644 index 000000000..5cd8971e9 --- /dev/null +++ b/examples/typec/power_delivery/CMakePresets.json @@ -0,0 +1,6 @@ +{ + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] +} diff --git a/hw/bsp/BoardPresets.json b/hw/bsp/BoardPresets.json new file mode 100644 index 000000000..c295efbdd --- /dev/null +++ b/hw/bsp/BoardPresets.json @@ -0,0 +1,4002 @@ +{ + "version": 6, + "configurePresets": [ + { + "name": "default", + "hidden": true, + "description": "Configure preset for the ${presetName} board", + "generator": "Ninja", + "binaryDir": "${sourceDir}/build/${presetName}", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "RelWithDebInfo", + "BOARD": "${presetName}" + } + }, + { + "name": "raspberrypi_zero", + "inherits": "default" + }, + { + "name": "raspberrypi_cm4", + "inherits": "default" + }, + { + "name": "raspberrypi_zero2", + "inherits": "default" + }, + { + "name": "ch32v103r_r1_1v0", + "inherits": "default" + }, + { + "name": "ch32v203c_r0_1v0", + "inherits": "default" + }, + { + "name": "ch32v203g_r0_1v0", + "inherits": "default" + }, + { + "name": "nanoch32v203", + "inherits": "default" + }, + { + "name": "ch32v307v_r1_1v0", + "inherits": "default" + }, + { + "name": "da14695_dk_usb", + "inherits": "default" + }, + { + "name": "da1469x_dk_pro", + "inherits": "default" + }, + { + "name": "adafruit_feather_esp32s2", + "inherits": "default" + }, + { + "name": "adafruit_feather_esp32s3", + "inherits": "default" + }, + { + "name": "adafruit_feather_esp32_v2", + "inherits": "default" + }, + { + "name": "adafruit_magtag_29gray", + "inherits": "default" + }, + { + "name": "adafruit_metro_esp32s2", + "inherits": "default" + }, + { + "name": "espressif_addax_1", + "inherits": "default" + }, + { + "name": "espressif_c3_devkitc", + "inherits": "default" + }, + { + "name": "espressif_c6_devkitc", + "inherits": "default" + }, + { + "name": "espressif_kaluga_1", + "inherits": "default" + }, + { + "name": "espressif_p4_function_ev", + "inherits": "default" + }, + { + "name": "espressif_s2_devkitc", + "inherits": "default" + }, + { + "name": "espressif_s3_devkitc", + "inherits": "default" + }, + { + "name": "espressif_s3_devkitm", + "inherits": "default" + }, + { + "name": "espressif_saola_1", + "inherits": "default" + }, + { + "name": "f1c100s", + "inherits": "default" + }, + { + "name": "fomu", + "inherits": "default" + }, + { + "name": "sipeed_longan_nano", + "inherits": "default" + }, + { + "name": "metro_m7_1011", + "inherits": "default" + }, + { + "name": "metro_m7_1011_sd", + "inherits": "default" + }, + { + "name": "mimxrt1010_evk", + "inherits": "default" + }, + { + "name": "mimxrt1015_evk", + "inherits": "default" + }, + { + "name": "mimxrt1020_evk", + "inherits": "default" + }, + { + "name": "mimxrt1024_evk", + "inherits": "default" + }, + { + "name": "mimxrt1050_evkb", + "inherits": "default" + }, + { + "name": "mimxrt1060_evk", + "inherits": "default" + }, + { + "name": "mimxrt1064_evk", + "inherits": "default" + }, + { + "name": "mimxrt1170_evkb", + "inherits": "default" + }, + { + "name": "teensy_40", + "inherits": "default" + }, + { + "name": "teensy_41", + "inherits": "default" + }, + { + "name": "frdm_k64f", + "inherits": "default" + }, + { + "name": "teensy_35", + "inherits": "default" + }, + { + "name": "frdm_k32l2a4s", + "inherits": "default" + }, + { + "name": "frdm_k32l2b", + "inherits": "default" + }, + { + "name": "kuiic", + "inherits": "default" + }, + { + "name": "frdm_kl25z", + "inherits": "default" + }, + { + "name": "lpcxpresso11u37", + "inherits": "default" + }, + { + "name": "lpcxpresso11u68", + "inherits": "default" + }, + { + "name": "lpcxpresso1347", + "inherits": "default" + }, + { + "name": "lpcxpresso1549", + "inherits": "default" + }, + { + "name": "lpcxpresso1769", + "inherits": "default" + }, + { + "name": "mbed1768", + "inherits": "default" + }, + { + "name": "lpcxpresso18s37", + "inherits": "default" + }, + { + "name": "mcb1800", + "inherits": "default" + }, + { + "name": "ea4088_quickstart", + "inherits": "default" + }, + { + "name": "ea4357", + "inherits": "default" + }, + { + "name": "lpcxpresso43s67", + "inherits": "default" + }, + { + "name": "lpcxpresso51u68", + "inherits": "default" + }, + { + "name": "lpcxpresso54114", + "inherits": "default" + }, + { + "name": "lpcxpresso54608", + "inherits": "default" + }, + { + "name": "lpcxpresso54628", + "inherits": "default" + }, + { + "name": "double_m33_express", + "inherits": "default" + }, + { + "name": "lpcxpresso55s28", + "inherits": "default" + }, + { + "name": "lpcxpresso55s69", + "inherits": "default" + }, + { + "name": "mcu_link", + "inherits": "default" + }, + { + "name": "max32650evkit", + "inherits": "default" + }, + { + "name": "max32650fthr", + "inherits": "default" + }, + { + "name": "max32651evkit", + "inherits": "default" + }, + { + "name": "max32666evkit", + "inherits": "default" + }, + { + "name": "max32666fthr", + "inherits": "default" + }, + { + "name": "apard32690", + "inherits": "default" + }, + { + "name": "max32690evkit", + "inherits": "default" + }, + { + "name": "max78002evkit", + "inherits": "default" + }, + { + "name": "frdm_mcxa153", + "inherits": "default" + }, + { + "name": "frdm_mcxn947", + "inherits": "default" + }, + { + "name": "mcxn947brk", + "inherits": "default" + }, + { + "name": "mm32f327x_mb39", + "inherits": "default" + }, + { + "name": "mm32f327x_pitaya_lite", + "inherits": "default" + }, + { + "name": "msp_exp430f5529lp", + "inherits": "default" + }, + { + "name": "msp_exp432e401y", + "inherits": "default" + }, + { + "name": "adafruit_clue", + "inherits": "default" + }, + { + "name": "arduino_nano33_ble", + "inherits": "default" + }, + { + "name": "circuitplayground_bluefruit", + "inherits": "default" + }, + { + "name": "feather_nrf52840_express", + "inherits": "default" + }, + { + "name": "feather_nrf52840_sense", + "inherits": "default" + }, + { + "name": "itsybitsy_nrf52840", + "inherits": "default" + }, + { + "name": "pca10056", + "inherits": "default" + }, + { + "name": "pca10059", + "inherits": "default" + }, + { + "name": "pca10095", + "inherits": "default" + }, + { + "name": "pca10100", + "inherits": "default" + }, + { + "name": "portenta_c33", + "inherits": "default" + }, + { + "name": "ra2a1_ek", + "inherits": "default" + }, + { + "name": "ra4m1_ek", + "inherits": "default" + }, + { + "name": "ra4m3_ek", + "inherits": "default" + }, + { + "name": "ra6m1_ek", + "inherits": "default" + }, + { + "name": "ra6m5_ek", + "inherits": "default" + }, + { + "name": "ra8m1_ek", + "inherits": "default" + }, + { + "name": "uno_r4", + "inherits": "default" + }, + { + "name": "feather_rp2040_max3421", + "inherits": "default" + }, + { + "name": "pico_sdk", + "inherits": "default" + }, + { + "name": "raspberry_pi_pico", + "inherits": "default" + }, + { + "name": "raspberry_pi_pico2", + "inherits": "default" + }, + { + "name": "cynthion_d11", + "inherits": "default" + }, + { + "name": "samd11_xplained", + "inherits": "default" + }, + { + "name": "atsamd21_xpro", + "inherits": "default" + }, + { + "name": "circuitplayground_express", + "inherits": "default" + }, + { + "name": "curiosity_nano", + "inherits": "default" + }, + { + "name": "cynthion_d21", + "inherits": "default" + }, + { + "name": "feather_m0_express", + "inherits": "default" + }, + { + "name": "itsybitsy_m0", + "inherits": "default" + }, + { + "name": "metro_m0_express", + "inherits": "default" + }, + { + "name": "qtpy", + "inherits": "default" + }, + { + "name": "seeeduino_xiao", + "inherits": "default" + }, + { + "name": "sparkfun_samd21_mini_usb", + "inherits": "default" + }, + { + "name": "trinket_m0", + "inherits": "default" + }, + { + "name": "d5035_01", + "inherits": "default" + }, + { + "name": "feather_m4_express", + "inherits": "default" + }, + { + "name": "itsybitsy_m4", + "inherits": "default" + }, + { + "name": "metro_m4_express", + "inherits": "default" + }, + { + "name": "pybadge", + "inherits": "default" + }, + { + "name": "pyportal", + "inherits": "default" + }, + { + "name": "same54_xplained", + "inherits": "default" + }, + { + "name": "samg55_xplained", + "inherits": "default" + }, + { + "name": "atsaml21_xpro", + "inherits": "default" + }, + { + "name": "saml22_feather", + "inherits": "default" + }, + { + "name": "sensorwatch_m0", + "inherits": "default" + }, + { + "name": "stm32c071nucleo", + "inherits": "default" + }, + { + "name": "stm32f070rbnucleo", + "inherits": "default" + }, + { + "name": "stm32f072disco", + "inherits": "default" + }, + { + "name": "stm32f072eval", + "inherits": "default" + }, + { + "name": "stm32f103ze_iar", + "inherits": "default" + }, + { + "name": "stm32f103_bluepill", + "inherits": "default" + }, + { + "name": "stm32f103_mini_2", + "inherits": "default" + }, + { + "name": "stm32f207nucleo", + "inherits": "default" + }, + { + "name": "stm32f303disco", + "inherits": "default" + }, + { + "name": "feather_stm32f405", + "inherits": "default" + }, + { + "name": "pyboardv11", + "inherits": "default" + }, + { + "name": "stm32f401blackpill", + "inherits": "default" + }, + { + "name": "stm32f407blackvet", + "inherits": "default" + }, + { + "name": "stm32f407disco", + "inherits": "default" + }, + { + "name": "stm32f411blackpill", + "inherits": "default" + }, + { + "name": "stm32f411disco", + "inherits": "default" + }, + { + "name": "stm32f412disco", + "inherits": "default" + }, + { + "name": "stm32f412nucleo", + "inherits": "default" + }, + { + "name": "stm32f439nucleo", + "inherits": "default" + }, + { + "name": "stlinkv3mini", + "inherits": "default" + }, + { + "name": "stm32f723disco", + "inherits": "default" + }, + { + "name": "stm32f746disco", + "inherits": "default" + }, + { + "name": "stm32f746nucleo", + "inherits": "default" + }, + { + "name": "stm32f767nucleo", + "inherits": "default" + }, + { + "name": "stm32f769disco", + "inherits": "default" + }, + { + "name": "stm32g0b1nucleo", + "inherits": "default" + }, + { + "name": "b_g474e_dpow1", + "inherits": "default" + }, + { + "name": "stm32g474nucleo", + "inherits": "default" + }, + { + "name": "stm32g491nucleo", + "inherits": "default" + }, + { + "name": "stm32h503nucleo", + "inherits": "default" + }, + { + "name": "stm32h563nucleo", + "inherits": "default" + }, + { + "name": "stm32h573i_dk", + "inherits": "default" + }, + { + "name": "daisyseed", + "inherits": "default" + }, + { + "name": "stm32h723nucleo", + "inherits": "default" + }, + { + "name": "stm32h743eval", + "inherits": "default" + }, + { + "name": "stm32h743nucleo", + "inherits": "default" + }, + { + "name": "stm32h745disco", + "inherits": "default" + }, + { + "name": "stm32h750bdk", + "inherits": "default" + }, + { + "name": "stm32h750_weact", + "inherits": "default" + }, + { + "name": "waveshare_openh743i", + "inherits": "default" + }, + { + "name": "stm32h7s3nucleo", + "inherits": "default" + }, + { + "name": "stm32l052dap52", + "inherits": "default" + }, + { + "name": "stm32l0538disco", + "inherits": "default" + }, + { + "name": "stm32l412nucleo", + "inherits": "default" + }, + { + "name": "stm32l476disco", + "inherits": "default" + }, + { + "name": "stm32l4p5nucleo", + "inherits": "default" + }, + { + "name": "stm32l4r5nucleo", + "inherits": "default" + }, + { + "name": "b_u585i_iot2a", + "inherits": "default" + }, + { + "name": "stm32u545nucleo", + "inherits": "default" + }, + { + "name": "stm32u575eval", + "inherits": "default" + }, + { + "name": "stm32u575nucleo", + "inherits": "default" + }, + { + "name": "stm32u5a5nucleo", + "inherits": "default" + }, + { + "name": "stm32wb55nucleo", + "inherits": "default" + }, + { + "name": "ek_tm4c123gxl", + "inherits": "default" + }, + { + "name": "xmc4500_relax", + "inherits": "default" + }, + { + "name": "xmc4700_relax", + "inherits": "default" + } + ], + "buildPresets": [ + { + "name": "raspberrypi_zero", + "description": "Build preset for the raspberrypi_zero board", + "configurePreset": "raspberrypi_zero" + }, + { + "name": "raspberrypi_cm4", + "description": "Build preset for the raspberrypi_cm4 board", + "configurePreset": "raspberrypi_cm4" + }, + { + "name": "raspberrypi_zero2", + "description": "Build preset for the raspberrypi_zero2 board", + "configurePreset": "raspberrypi_zero2" + }, + { + "name": "ch32v103r_r1_1v0", + "description": "Build preset for the ch32v103r_r1_1v0 board", + "configurePreset": "ch32v103r_r1_1v0" + }, + { + "name": "ch32v203c_r0_1v0", + "description": "Build preset for the ch32v203c_r0_1v0 board", + "configurePreset": "ch32v203c_r0_1v0" + }, + { + "name": "ch32v203g_r0_1v0", + "description": "Build preset for the ch32v203g_r0_1v0 board", + "configurePreset": "ch32v203g_r0_1v0" + }, + { + "name": "nanoch32v203", + "description": "Build preset for the nanoch32v203 board", + "configurePreset": "nanoch32v203" + }, + { + "name": "ch32v307v_r1_1v0", + "description": "Build preset for the ch32v307v_r1_1v0 board", + "configurePreset": "ch32v307v_r1_1v0" + }, + { + "name": "da14695_dk_usb", + "description": "Build preset for the da14695_dk_usb board", + "configurePreset": "da14695_dk_usb" + }, + { + "name": "da1469x_dk_pro", + "description": "Build preset for the da1469x_dk_pro board", + "configurePreset": "da1469x_dk_pro" + }, + { + "name": "adafruit_feather_esp32s2", + "description": "Build preset for the adafruit_feather_esp32s2 board", + "configurePreset": "adafruit_feather_esp32s2" + }, + { + "name": "adafruit_feather_esp32s3", + "description": "Build preset for the adafruit_feather_esp32s3 board", + "configurePreset": "adafruit_feather_esp32s3" + }, + { + "name": "adafruit_feather_esp32_v2", + "description": "Build preset for the adafruit_feather_esp32_v2 board", + "configurePreset": "adafruit_feather_esp32_v2" + }, + { + "name": "adafruit_magtag_29gray", + "description": "Build preset for the adafruit_magtag_29gray board", + "configurePreset": "adafruit_magtag_29gray" + }, + { + "name": "adafruit_metro_esp32s2", + "description": "Build preset for the adafruit_metro_esp32s2 board", + "configurePreset": "adafruit_metro_esp32s2" + }, + { + "name": "espressif_addax_1", + "description": "Build preset for the espressif_addax_1 board", + "configurePreset": "espressif_addax_1" + }, + { + "name": "espressif_c3_devkitc", + "description": "Build preset for the espressif_c3_devkitc board", + "configurePreset": "espressif_c3_devkitc" + }, + { + "name": "espressif_c6_devkitc", + "description": "Build preset for the espressif_c6_devkitc board", + "configurePreset": "espressif_c6_devkitc" + }, + { + "name": "espressif_kaluga_1", + "description": "Build preset for the espressif_kaluga_1 board", + "configurePreset": "espressif_kaluga_1" + }, + { + "name": "espressif_p4_function_ev", + "description": "Build preset for the espressif_p4_function_ev board", + "configurePreset": "espressif_p4_function_ev" + }, + { + "name": "espressif_s2_devkitc", + "description": "Build preset for the espressif_s2_devkitc board", + "configurePreset": "espressif_s2_devkitc" + }, + { + "name": "espressif_s3_devkitc", + "description": "Build preset for the espressif_s3_devkitc board", + "configurePreset": "espressif_s3_devkitc" + }, + { + "name": "espressif_s3_devkitm", + "description": "Build preset for the espressif_s3_devkitm board", + "configurePreset": "espressif_s3_devkitm" + }, + { + "name": "espressif_saola_1", + "description": "Build preset for the espressif_saola_1 board", + "configurePreset": "espressif_saola_1" + }, + { + "name": "f1c100s", + "description": "Build preset for the f1c100s board", + "configurePreset": "f1c100s" + }, + { + "name": "fomu", + "description": "Build preset for the fomu board", + "configurePreset": "fomu" + }, + { + "name": "sipeed_longan_nano", + "description": "Build preset for the sipeed_longan_nano board", + "configurePreset": "sipeed_longan_nano" + }, + { + "name": "metro_m7_1011", + "description": "Build preset for the metro_m7_1011 board", + "configurePreset": "metro_m7_1011" + }, + { + "name": "metro_m7_1011_sd", + "description": "Build preset for the metro_m7_1011_sd board", + "configurePreset": "metro_m7_1011_sd" + }, + { + "name": "mimxrt1010_evk", + "description": "Build preset for the mimxrt1010_evk board", + "configurePreset": "mimxrt1010_evk" + }, + { + "name": "mimxrt1015_evk", + "description": "Build preset for the mimxrt1015_evk board", + "configurePreset": "mimxrt1015_evk" + }, + { + "name": "mimxrt1020_evk", + "description": "Build preset for the mimxrt1020_evk board", + "configurePreset": "mimxrt1020_evk" + }, + { + "name": "mimxrt1024_evk", + "description": "Build preset for the mimxrt1024_evk board", + "configurePreset": "mimxrt1024_evk" + }, + { + "name": "mimxrt1050_evkb", + "description": "Build preset for the mimxrt1050_evkb board", + "configurePreset": "mimxrt1050_evkb" + }, + { + "name": "mimxrt1060_evk", + "description": "Build preset for the mimxrt1060_evk board", + "configurePreset": "mimxrt1060_evk" + }, + { + "name": "mimxrt1064_evk", + "description": "Build preset for the mimxrt1064_evk board", + "configurePreset": "mimxrt1064_evk" + }, + { + "name": "mimxrt1170_evkb", + "description": "Build preset for the mimxrt1170_evkb board", + "configurePreset": "mimxrt1170_evkb" + }, + { + "name": "teensy_40", + "description": "Build preset for the teensy_40 board", + "configurePreset": "teensy_40" + }, + { + "name": "teensy_41", + "description": "Build preset for the teensy_41 board", + "configurePreset": "teensy_41" + }, + { + "name": "frdm_k64f", + "description": "Build preset for the frdm_k64f board", + "configurePreset": "frdm_k64f" + }, + { + "name": "teensy_35", + "description": "Build preset for the teensy_35 board", + "configurePreset": "teensy_35" + }, + { + "name": "frdm_k32l2a4s", + "description": "Build preset for the frdm_k32l2a4s board", + "configurePreset": "frdm_k32l2a4s" + }, + { + "name": "frdm_k32l2b", + "description": "Build preset for the frdm_k32l2b board", + "configurePreset": "frdm_k32l2b" + }, + { + "name": "kuiic", + "description": "Build preset for the kuiic board", + "configurePreset": "kuiic" + }, + { + "name": "frdm_kl25z", + "description": "Build preset for the frdm_kl25z board", + "configurePreset": "frdm_kl25z" + }, + { + "name": "lpcxpresso11u37", + "description": "Build preset for the lpcxpresso11u37 board", + "configurePreset": "lpcxpresso11u37" + }, + { + "name": "lpcxpresso11u68", + "description": "Build preset for the lpcxpresso11u68 board", + "configurePreset": "lpcxpresso11u68" + }, + { + "name": "lpcxpresso1347", + "description": "Build preset for the lpcxpresso1347 board", + "configurePreset": "lpcxpresso1347" + }, + { + "name": "lpcxpresso1549", + "description": "Build preset for the lpcxpresso1549 board", + "configurePreset": "lpcxpresso1549" + }, + { + "name": "lpcxpresso1769", + "description": "Build preset for the lpcxpresso1769 board", + "configurePreset": "lpcxpresso1769" + }, + { + "name": "mbed1768", + "description": "Build preset for the mbed1768 board", + "configurePreset": "mbed1768" + }, + { + "name": "lpcxpresso18s37", + "description": "Build preset for the lpcxpresso18s37 board", + "configurePreset": "lpcxpresso18s37" + }, + { + "name": "mcb1800", + "description": "Build preset for the mcb1800 board", + "configurePreset": "mcb1800" + }, + { + "name": "ea4088_quickstart", + "description": "Build preset for the ea4088_quickstart board", + "configurePreset": "ea4088_quickstart" + }, + { + "name": "ea4357", + "description": "Build preset for the ea4357 board", + "configurePreset": "ea4357" + }, + { + "name": "lpcxpresso43s67", + "description": "Build preset for the lpcxpresso43s67 board", + "configurePreset": "lpcxpresso43s67" + }, + { + "name": "lpcxpresso51u68", + "description": "Build preset for the lpcxpresso51u68 board", + "configurePreset": "lpcxpresso51u68" + }, + { + "name": "lpcxpresso54114", + "description": "Build preset for the lpcxpresso54114 board", + "configurePreset": "lpcxpresso54114" + }, + { + "name": "lpcxpresso54608", + "description": "Build preset for the lpcxpresso54608 board", + "configurePreset": "lpcxpresso54608" + }, + { + "name": "lpcxpresso54628", + "description": "Build preset for the lpcxpresso54628 board", + "configurePreset": "lpcxpresso54628" + }, + { + "name": "double_m33_express", + "description": "Build preset for the double_m33_express board", + "configurePreset": "double_m33_express" + }, + { + "name": "lpcxpresso55s28", + "description": "Build preset for the lpcxpresso55s28 board", + "configurePreset": "lpcxpresso55s28" + }, + { + "name": "lpcxpresso55s69", + "description": "Build preset for the lpcxpresso55s69 board", + "configurePreset": "lpcxpresso55s69" + }, + { + "name": "mcu_link", + "description": "Build preset for the mcu_link board", + "configurePreset": "mcu_link" + }, + { + "name": "max32650evkit", + "description": "Build preset for the max32650evkit board", + "configurePreset": "max32650evkit" + }, + { + "name": "max32650fthr", + "description": "Build preset for the max32650fthr board", + "configurePreset": "max32650fthr" + }, + { + "name": "max32651evkit", + "description": "Build preset for the max32651evkit board", + "configurePreset": "max32651evkit" + }, + { + "name": "max32666evkit", + "description": "Build preset for the max32666evkit board", + "configurePreset": "max32666evkit" + }, + { + "name": "max32666fthr", + "description": "Build preset for the max32666fthr board", + "configurePreset": "max32666fthr" + }, + { + "name": "apard32690", + "description": "Build preset for the apard32690 board", + "configurePreset": "apard32690" + }, + { + "name": "max32690evkit", + "description": "Build preset for the max32690evkit board", + "configurePreset": "max32690evkit" + }, + { + "name": "max78002evkit", + "description": "Build preset for the max78002evkit board", + "configurePreset": "max78002evkit" + }, + { + "name": "frdm_mcxa153", + "description": "Build preset for the frdm_mcxa153 board", + "configurePreset": "frdm_mcxa153" + }, + { + "name": "frdm_mcxn947", + "description": "Build preset for the frdm_mcxn947 board", + "configurePreset": "frdm_mcxn947" + }, + { + "name": "mcxn947brk", + "description": "Build preset for the mcxn947brk board", + "configurePreset": "mcxn947brk" + }, + { + "name": "mm32f327x_mb39", + "description": "Build preset for the mm32f327x_mb39 board", + "configurePreset": "mm32f327x_mb39" + }, + { + "name": "mm32f327x_pitaya_lite", + "description": "Build preset for the mm32f327x_pitaya_lite board", + "configurePreset": "mm32f327x_pitaya_lite" + }, + { + "name": "msp_exp430f5529lp", + "description": "Build preset for the msp_exp430f5529lp board", + "configurePreset": "msp_exp430f5529lp" + }, + { + "name": "msp_exp432e401y", + "description": "Build preset for the msp_exp432e401y board", + "configurePreset": "msp_exp432e401y" + }, + { + "name": "adafruit_clue", + "description": "Build preset for the adafruit_clue board", + "configurePreset": "adafruit_clue" + }, + { + "name": "arduino_nano33_ble", + "description": "Build preset for the arduino_nano33_ble board", + "configurePreset": "arduino_nano33_ble" + }, + { + "name": "circuitplayground_bluefruit", + "description": "Build preset for the circuitplayground_bluefruit board", + "configurePreset": "circuitplayground_bluefruit" + }, + { + "name": "feather_nrf52840_express", + "description": "Build preset for the feather_nrf52840_express board", + "configurePreset": "feather_nrf52840_express" + }, + { + "name": "feather_nrf52840_sense", + "description": "Build preset for the feather_nrf52840_sense board", + "configurePreset": "feather_nrf52840_sense" + }, + { + "name": "itsybitsy_nrf52840", + "description": "Build preset for the itsybitsy_nrf52840 board", + "configurePreset": "itsybitsy_nrf52840" + }, + { + "name": "pca10056", + "description": "Build preset for the pca10056 board", + "configurePreset": "pca10056" + }, + { + "name": "pca10059", + "description": "Build preset for the pca10059 board", + "configurePreset": "pca10059" + }, + { + "name": "pca10095", + "description": "Build preset for the pca10095 board", + "configurePreset": "pca10095" + }, + { + "name": "pca10100", + "description": "Build preset for the pca10100 board", + "configurePreset": "pca10100" + }, + { + "name": "portenta_c33", + "description": "Build preset for the portenta_c33 board", + "configurePreset": "portenta_c33" + }, + { + "name": "ra2a1_ek", + "description": "Build preset for the ra2a1_ek board", + "configurePreset": "ra2a1_ek" + }, + { + "name": "ra4m1_ek", + "description": "Build preset for the ra4m1_ek board", + "configurePreset": "ra4m1_ek" + }, + { + "name": "ra4m3_ek", + "description": "Build preset for the ra4m3_ek board", + "configurePreset": "ra4m3_ek" + }, + { + "name": "ra6m1_ek", + "description": "Build preset for the ra6m1_ek board", + "configurePreset": "ra6m1_ek" + }, + { + "name": "ra6m5_ek", + "description": "Build preset for the ra6m5_ek board", + "configurePreset": "ra6m5_ek" + }, + { + "name": "ra8m1_ek", + "description": "Build preset for the ra8m1_ek board", + "configurePreset": "ra8m1_ek" + }, + { + "name": "uno_r4", + "description": "Build preset for the uno_r4 board", + "configurePreset": "uno_r4" + }, + { + "name": "feather_rp2040_max3421", + "description": "Build preset for the feather_rp2040_max3421 board", + "configurePreset": "feather_rp2040_max3421" + }, + { + "name": "pico_sdk", + "description": "Build preset for the pico_sdk board", + "configurePreset": "pico_sdk" + }, + { + "name": "raspberry_pi_pico", + "description": "Build preset for the raspberry_pi_pico board", + "configurePreset": "raspberry_pi_pico" + }, + { + "name": "raspberry_pi_pico2", + "description": "Build preset for the raspberry_pi_pico2 board", + "configurePreset": "raspberry_pi_pico2" + }, + { + "name": "cynthion_d11", + "description": "Build preset for the cynthion_d11 board", + "configurePreset": "cynthion_d11" + }, + { + "name": "samd11_xplained", + "description": "Build preset for the samd11_xplained board", + "configurePreset": "samd11_xplained" + }, + { + "name": "atsamd21_xpro", + "description": "Build preset for the atsamd21_xpro board", + "configurePreset": "atsamd21_xpro" + }, + { + "name": "circuitplayground_express", + "description": "Build preset for the circuitplayground_express board", + "configurePreset": "circuitplayground_express" + }, + { + "name": "curiosity_nano", + "description": "Build preset for the curiosity_nano board", + "configurePreset": "curiosity_nano" + }, + { + "name": "cynthion_d21", + "description": "Build preset for the cynthion_d21 board", + "configurePreset": "cynthion_d21" + }, + { + "name": "feather_m0_express", + "description": "Build preset for the feather_m0_express board", + "configurePreset": "feather_m0_express" + }, + { + "name": "itsybitsy_m0", + "description": "Build preset for the itsybitsy_m0 board", + "configurePreset": "itsybitsy_m0" + }, + { + "name": "metro_m0_express", + "description": "Build preset for the metro_m0_express board", + "configurePreset": "metro_m0_express" + }, + { + "name": "qtpy", + "description": "Build preset for the qtpy board", + "configurePreset": "qtpy" + }, + { + "name": "seeeduino_xiao", + "description": "Build preset for the seeeduino_xiao board", + "configurePreset": "seeeduino_xiao" + }, + { + "name": "sparkfun_samd21_mini_usb", + "description": "Build preset for the sparkfun_samd21_mini_usb board", + "configurePreset": "sparkfun_samd21_mini_usb" + }, + { + "name": "trinket_m0", + "description": "Build preset for the trinket_m0 board", + "configurePreset": "trinket_m0" + }, + { + "name": "d5035_01", + "description": "Build preset for the d5035_01 board", + "configurePreset": "d5035_01" + }, + { + "name": "feather_m4_express", + "description": "Build preset for the feather_m4_express board", + "configurePreset": "feather_m4_express" + }, + { + "name": "itsybitsy_m4", + "description": "Build preset for the itsybitsy_m4 board", + "configurePreset": "itsybitsy_m4" + }, + { + "name": "metro_m4_express", + "description": "Build preset for the metro_m4_express board", + "configurePreset": "metro_m4_express" + }, + { + "name": "pybadge", + "description": "Build preset for the pybadge board", + "configurePreset": "pybadge" + }, + { + "name": "pyportal", + "description": "Build preset for the pyportal board", + "configurePreset": "pyportal" + }, + { + "name": "same54_xplained", + "description": "Build preset for the same54_xplained board", + "configurePreset": "same54_xplained" + }, + { + "name": "samg55_xplained", + "description": "Build preset for the samg55_xplained board", + "configurePreset": "samg55_xplained" + }, + { + "name": "atsaml21_xpro", + "description": "Build preset for the atsaml21_xpro board", + "configurePreset": "atsaml21_xpro" + }, + { + "name": "saml22_feather", + "description": "Build preset for the saml22_feather board", + "configurePreset": "saml22_feather" + }, + { + "name": "sensorwatch_m0", + "description": "Build preset for the sensorwatch_m0 board", + "configurePreset": "sensorwatch_m0" + }, + { + "name": "stm32c071nucleo", + "description": "Build preset for the stm32c071nucleo board", + "configurePreset": "stm32c071nucleo" + }, + { + "name": "stm32f070rbnucleo", + "description": "Build preset for the stm32f070rbnucleo board", + "configurePreset": "stm32f070rbnucleo" + }, + { + "name": "stm32f072disco", + "description": "Build preset for the stm32f072disco board", + "configurePreset": "stm32f072disco" + }, + { + "name": "stm32f072eval", + "description": "Build preset for the stm32f072eval board", + "configurePreset": "stm32f072eval" + }, + { + "name": "stm32f103ze_iar", + "description": "Build preset for the stm32f103ze_iar board", + "configurePreset": "stm32f103ze_iar" + }, + { + "name": "stm32f103_bluepill", + "description": "Build preset for the stm32f103_bluepill board", + "configurePreset": "stm32f103_bluepill" + }, + { + "name": "stm32f103_mini_2", + "description": "Build preset for the stm32f103_mini_2 board", + "configurePreset": "stm32f103_mini_2" + }, + { + "name": "stm32f207nucleo", + "description": "Build preset for the stm32f207nucleo board", + "configurePreset": "stm32f207nucleo" + }, + { + "name": "stm32f303disco", + "description": "Build preset for the stm32f303disco board", + "configurePreset": "stm32f303disco" + }, + { + "name": "feather_stm32f405", + "description": "Build preset for the feather_stm32f405 board", + "configurePreset": "feather_stm32f405" + }, + { + "name": "pyboardv11", + "description": "Build preset for the pyboardv11 board", + "configurePreset": "pyboardv11" + }, + { + "name": "stm32f401blackpill", + "description": "Build preset for the stm32f401blackpill board", + "configurePreset": "stm32f401blackpill" + }, + { + "name": "stm32f407blackvet", + "description": "Build preset for the stm32f407blackvet board", + "configurePreset": "stm32f407blackvet" + }, + { + "name": "stm32f407disco", + "description": "Build preset for the stm32f407disco board", + "configurePreset": "stm32f407disco" + }, + { + "name": "stm32f411blackpill", + "description": "Build preset for the stm32f411blackpill board", + "configurePreset": "stm32f411blackpill" + }, + { + "name": "stm32f411disco", + "description": "Build preset for the stm32f411disco board", + "configurePreset": "stm32f411disco" + }, + { + "name": "stm32f412disco", + "description": "Build preset for the stm32f412disco board", + "configurePreset": "stm32f412disco" + }, + { + "name": "stm32f412nucleo", + "description": "Build preset for the stm32f412nucleo board", + "configurePreset": "stm32f412nucleo" + }, + { + "name": "stm32f439nucleo", + "description": "Build preset for the stm32f439nucleo board", + "configurePreset": "stm32f439nucleo" + }, + { + "name": "stlinkv3mini", + "description": "Build preset for the stlinkv3mini board", + "configurePreset": "stlinkv3mini" + }, + { + "name": "stm32f723disco", + "description": "Build preset for the stm32f723disco board", + "configurePreset": "stm32f723disco" + }, + { + "name": "stm32f746disco", + "description": "Build preset for the stm32f746disco board", + "configurePreset": "stm32f746disco" + }, + { + "name": "stm32f746nucleo", + "description": "Build preset for the stm32f746nucleo board", + "configurePreset": "stm32f746nucleo" + }, + { + "name": "stm32f767nucleo", + "description": "Build preset for the stm32f767nucleo board", + "configurePreset": "stm32f767nucleo" + }, + { + "name": "stm32f769disco", + "description": "Build preset for the stm32f769disco board", + "configurePreset": "stm32f769disco" + }, + { + "name": "stm32g0b1nucleo", + "description": "Build preset for the stm32g0b1nucleo board", + "configurePreset": "stm32g0b1nucleo" + }, + { + "name": "b_g474e_dpow1", + "description": "Build preset for the b_g474e_dpow1 board", + "configurePreset": "b_g474e_dpow1" + }, + { + "name": "stm32g474nucleo", + "description": "Build preset for the stm32g474nucleo board", + "configurePreset": "stm32g474nucleo" + }, + { + "name": "stm32g491nucleo", + "description": "Build preset for the stm32g491nucleo board", + "configurePreset": "stm32g491nucleo" + }, + { + "name": "stm32h503nucleo", + "description": "Build preset for the stm32h503nucleo board", + "configurePreset": "stm32h503nucleo" + }, + { + "name": "stm32h563nucleo", + "description": "Build preset for the stm32h563nucleo board", + "configurePreset": "stm32h563nucleo" + }, + { + "name": "stm32h573i_dk", + "description": "Build preset for the stm32h573i_dk board", + "configurePreset": "stm32h573i_dk" + }, + { + "name": "daisyseed", + "description": "Build preset for the daisyseed board", + "configurePreset": "daisyseed" + }, + { + "name": "stm32h723nucleo", + "description": "Build preset for the stm32h723nucleo board", + "configurePreset": "stm32h723nucleo" + }, + { + "name": "stm32h743eval", + "description": "Build preset for the stm32h743eval board", + "configurePreset": "stm32h743eval" + }, + { + "name": "stm32h743nucleo", + "description": "Build preset for the stm32h743nucleo board", + "configurePreset": "stm32h743nucleo" + }, + { + "name": "stm32h745disco", + "description": "Build preset for the stm32h745disco board", + "configurePreset": "stm32h745disco" + }, + { + "name": "stm32h750bdk", + "description": "Build preset for the stm32h750bdk board", + "configurePreset": "stm32h750bdk" + }, + { + "name": "stm32h750_weact", + "description": "Build preset for the stm32h750_weact board", + "configurePreset": "stm32h750_weact" + }, + { + "name": "waveshare_openh743i", + "description": "Build preset for the waveshare_openh743i board", + "configurePreset": "waveshare_openh743i" + }, + { + "name": "stm32h7s3nucleo", + "description": "Build preset for the stm32h7s3nucleo board", + "configurePreset": "stm32h7s3nucleo" + }, + { + "name": "stm32l052dap52", + "description": "Build preset for the stm32l052dap52 board", + "configurePreset": "stm32l052dap52" + }, + { + "name": "stm32l0538disco", + "description": "Build preset for the stm32l0538disco board", + "configurePreset": "stm32l0538disco" + }, + { + "name": "stm32l412nucleo", + "description": "Build preset for the stm32l412nucleo board", + "configurePreset": "stm32l412nucleo" + }, + { + "name": "stm32l476disco", + "description": "Build preset for the stm32l476disco board", + "configurePreset": "stm32l476disco" + }, + { + "name": "stm32l4p5nucleo", + "description": "Build preset for the stm32l4p5nucleo board", + "configurePreset": "stm32l4p5nucleo" + }, + { + "name": "stm32l4r5nucleo", + "description": "Build preset for the stm32l4r5nucleo board", + "configurePreset": "stm32l4r5nucleo" + }, + { + "name": "b_u585i_iot2a", + "description": "Build preset for the b_u585i_iot2a board", + "configurePreset": "b_u585i_iot2a" + }, + { + "name": "stm32u545nucleo", + "description": "Build preset for the stm32u545nucleo board", + "configurePreset": "stm32u545nucleo" + }, + { + "name": "stm32u575eval", + "description": "Build preset for the stm32u575eval board", + "configurePreset": "stm32u575eval" + }, + { + "name": "stm32u575nucleo", + "description": "Build preset for the stm32u575nucleo board", + "configurePreset": "stm32u575nucleo" + }, + { + "name": "stm32u5a5nucleo", + "description": "Build preset for the stm32u5a5nucleo board", + "configurePreset": "stm32u5a5nucleo" + }, + { + "name": "stm32wb55nucleo", + "description": "Build preset for the stm32wb55nucleo board", + "configurePreset": "stm32wb55nucleo" + }, + { + "name": "ek_tm4c123gxl", + "description": "Build preset for the ek_tm4c123gxl board", + "configurePreset": "ek_tm4c123gxl" + }, + { + "name": "xmc4500_relax", + "description": "Build preset for the xmc4500_relax board", + "configurePreset": "xmc4500_relax" + }, + { + "name": "xmc4700_relax", + "description": "Build preset for the xmc4700_relax board", + "configurePreset": "xmc4700_relax" + } + ], + "workflowPresets": [ + { + "name": "raspberrypi_zero", + "steps": [ + { + "type": "configure", + "name": "raspberrypi_zero" + }, + { + "type": "build", + "name": "raspberrypi_zero" + } + ] + }, + { + "name": "raspberrypi_cm4", + "steps": [ + { + "type": "configure", + "name": "raspberrypi_cm4" + }, + { + "type": "build", + "name": "raspberrypi_cm4" + } + ] + }, + { + "name": "raspberrypi_zero2", + "steps": [ + { + "type": "configure", + "name": "raspberrypi_zero2" + }, + { + "type": "build", + "name": "raspberrypi_zero2" + } + ] + }, + { + "name": "ch32v103r_r1_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v103r_r1_1v0" + }, + { + "type": "build", + "name": "ch32v103r_r1_1v0" + } + ] + }, + { + "name": "ch32v203c_r0_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v203c_r0_1v0" + }, + { + "type": "build", + "name": "ch32v203c_r0_1v0" + } + ] + }, + { + "name": "ch32v203g_r0_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v203g_r0_1v0" + }, + { + "type": "build", + "name": "ch32v203g_r0_1v0" + } + ] + }, + { + "name": "nanoch32v203", + "steps": [ + { + "type": "configure", + "name": "nanoch32v203" + }, + { + "type": "build", + "name": "nanoch32v203" + } + ] + }, + { + "name": "ch32v307v_r1_1v0", + "steps": [ + { + "type": "configure", + "name": "ch32v307v_r1_1v0" + }, + { + "type": "build", + "name": "ch32v307v_r1_1v0" + } + ] + }, + { + "name": "da14695_dk_usb", + "steps": [ + { + "type": "configure", + "name": "da14695_dk_usb" + }, + { + "type": "build", + "name": "da14695_dk_usb" + } + ] + }, + { + "name": "da1469x_dk_pro", + "steps": [ + { + "type": "configure", + "name": "da1469x_dk_pro" + }, + { + "type": "build", + "name": "da1469x_dk_pro" + } + ] + }, + { + "name": "adafruit_feather_esp32s2", + "steps": [ + { + "type": "configure", + "name": "adafruit_feather_esp32s2" + }, + { + "type": "build", + "name": "adafruit_feather_esp32s2" + } + ] + }, + { + "name": "adafruit_feather_esp32s3", + "steps": [ + { + "type": "configure", + "name": "adafruit_feather_esp32s3" + }, + { + "type": "build", + "name": "adafruit_feather_esp32s3" + } + ] + }, + { + "name": "adafruit_feather_esp32_v2", + "steps": [ + { + "type": "configure", + "name": "adafruit_feather_esp32_v2" + }, + { + "type": "build", + "name": "adafruit_feather_esp32_v2" + } + ] + }, + { + "name": "adafruit_magtag_29gray", + "steps": [ + { + "type": "configure", + "name": "adafruit_magtag_29gray" + }, + { + "type": "build", + "name": "adafruit_magtag_29gray" + } + ] + }, + { + "name": "adafruit_metro_esp32s2", + "steps": [ + { + "type": "configure", + "name": "adafruit_metro_esp32s2" + }, + { + "type": "build", + "name": "adafruit_metro_esp32s2" + } + ] + }, + { + "name": "espressif_addax_1", + "steps": [ + { + "type": "configure", + "name": "espressif_addax_1" + }, + { + "type": "build", + "name": "espressif_addax_1" + } + ] + }, + { + "name": "espressif_c3_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_c3_devkitc" + }, + { + "type": "build", + "name": "espressif_c3_devkitc" + } + ] + }, + { + "name": "espressif_c6_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_c6_devkitc" + }, + { + "type": "build", + "name": "espressif_c6_devkitc" + } + ] + }, + { + "name": "espressif_kaluga_1", + "steps": [ + { + "type": "configure", + "name": "espressif_kaluga_1" + }, + { + "type": "build", + "name": "espressif_kaluga_1" + } + ] + }, + { + "name": "espressif_p4_function_ev", + "steps": [ + { + "type": "configure", + "name": "espressif_p4_function_ev" + }, + { + "type": "build", + "name": "espressif_p4_function_ev" + } + ] + }, + { + "name": "espressif_s2_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_s2_devkitc" + }, + { + "type": "build", + "name": "espressif_s2_devkitc" + } + ] + }, + { + "name": "espressif_s3_devkitc", + "steps": [ + { + "type": "configure", + "name": "espressif_s3_devkitc" + }, + { + "type": "build", + "name": "espressif_s3_devkitc" + } + ] + }, + { + "name": "espressif_s3_devkitm", + "steps": [ + { + "type": "configure", + "name": "espressif_s3_devkitm" + }, + { + "type": "build", + "name": "espressif_s3_devkitm" + } + ] + }, + { + "name": "espressif_saola_1", + "steps": [ + { + "type": "configure", + "name": "espressif_saola_1" + }, + { + "type": "build", + "name": "espressif_saola_1" + } + ] + }, + { + "name": "f1c100s", + "steps": [ + { + "type": "configure", + "name": "f1c100s" + }, + { + "type": "build", + "name": "f1c100s" + } + ] + }, + { + "name": "fomu", + "steps": [ + { + "type": "configure", + "name": "fomu" + }, + { + "type": "build", + "name": "fomu" + } + ] + }, + { + "name": "sipeed_longan_nano", + "steps": [ + { + "type": "configure", + "name": "sipeed_longan_nano" + }, + { + "type": "build", + "name": "sipeed_longan_nano" + } + ] + }, + { + "name": "metro_m7_1011", + "steps": [ + { + "type": "configure", + "name": "metro_m7_1011" + }, + { + "type": "build", + "name": "metro_m7_1011" + } + ] + }, + { + "name": "metro_m7_1011_sd", + "steps": [ + { + "type": "configure", + "name": "metro_m7_1011_sd" + }, + { + "type": "build", + "name": "metro_m7_1011_sd" + } + ] + }, + { + "name": "mimxrt1010_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1010_evk" + }, + { + "type": "build", + "name": "mimxrt1010_evk" + } + ] + }, + { + "name": "mimxrt1015_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1015_evk" + }, + { + "type": "build", + "name": "mimxrt1015_evk" + } + ] + }, + { + "name": "mimxrt1020_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1020_evk" + }, + { + "type": "build", + "name": "mimxrt1020_evk" + } + ] + }, + { + "name": "mimxrt1024_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1024_evk" + }, + { + "type": "build", + "name": "mimxrt1024_evk" + } + ] + }, + { + "name": "mimxrt1050_evkb", + "steps": [ + { + "type": "configure", + "name": "mimxrt1050_evkb" + }, + { + "type": "build", + "name": "mimxrt1050_evkb" + } + ] + }, + { + "name": "mimxrt1060_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1060_evk" + }, + { + "type": "build", + "name": "mimxrt1060_evk" + } + ] + }, + { + "name": "mimxrt1064_evk", + "steps": [ + { + "type": "configure", + "name": "mimxrt1064_evk" + }, + { + "type": "build", + "name": "mimxrt1064_evk" + } + ] + }, + { + "name": "mimxrt1170_evkb", + "steps": [ + { + "type": "configure", + "name": "mimxrt1170_evkb" + }, + { + "type": "build", + "name": "mimxrt1170_evkb" + } + ] + }, + { + "name": "teensy_40", + "steps": [ + { + "type": "configure", + "name": "teensy_40" + }, + { + "type": "build", + "name": "teensy_40" + } + ] + }, + { + "name": "teensy_41", + "steps": [ + { + "type": "configure", + "name": "teensy_41" + }, + { + "type": "build", + "name": "teensy_41" + } + ] + }, + { + "name": "frdm_k64f", + "steps": [ + { + "type": "configure", + "name": "frdm_k64f" + }, + { + "type": "build", + "name": "frdm_k64f" + } + ] + }, + { + "name": "teensy_35", + "steps": [ + { + "type": "configure", + "name": "teensy_35" + }, + { + "type": "build", + "name": "teensy_35" + } + ] + }, + { + "name": "frdm_k32l2a4s", + "steps": [ + { + "type": "configure", + "name": "frdm_k32l2a4s" + }, + { + "type": "build", + "name": "frdm_k32l2a4s" + } + ] + }, + { + "name": "frdm_k32l2b", + "steps": [ + { + "type": "configure", + "name": "frdm_k32l2b" + }, + { + "type": "build", + "name": "frdm_k32l2b" + } + ] + }, + { + "name": "kuiic", + "steps": [ + { + "type": "configure", + "name": "kuiic" + }, + { + "type": "build", + "name": "kuiic" + } + ] + }, + { + "name": "frdm_kl25z", + "steps": [ + { + "type": "configure", + "name": "frdm_kl25z" + }, + { + "type": "build", + "name": "frdm_kl25z" + } + ] + }, + { + "name": "lpcxpresso11u37", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso11u37" + }, + { + "type": "build", + "name": "lpcxpresso11u37" + } + ] + }, + { + "name": "lpcxpresso11u68", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso11u68" + }, + { + "type": "build", + "name": "lpcxpresso11u68" + } + ] + }, + { + "name": "lpcxpresso1347", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso1347" + }, + { + "type": "build", + "name": "lpcxpresso1347" + } + ] + }, + { + "name": "lpcxpresso1549", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso1549" + }, + { + "type": "build", + "name": "lpcxpresso1549" + } + ] + }, + { + "name": "lpcxpresso1769", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso1769" + }, + { + "type": "build", + "name": "lpcxpresso1769" + } + ] + }, + { + "name": "mbed1768", + "steps": [ + { + "type": "configure", + "name": "mbed1768" + }, + { + "type": "build", + "name": "mbed1768" + } + ] + }, + { + "name": "lpcxpresso18s37", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso18s37" + }, + { + "type": "build", + "name": "lpcxpresso18s37" + } + ] + }, + { + "name": "mcb1800", + "steps": [ + { + "type": "configure", + "name": "mcb1800" + }, + { + "type": "build", + "name": "mcb1800" + } + ] + }, + { + "name": "ea4088_quickstart", + "steps": [ + { + "type": "configure", + "name": "ea4088_quickstart" + }, + { + "type": "build", + "name": "ea4088_quickstart" + } + ] + }, + { + "name": "ea4357", + "steps": [ + { + "type": "configure", + "name": "ea4357" + }, + { + "type": "build", + "name": "ea4357" + } + ] + }, + { + "name": "lpcxpresso43s67", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso43s67" + }, + { + "type": "build", + "name": "lpcxpresso43s67" + } + ] + }, + { + "name": "lpcxpresso51u68", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso51u68" + }, + { + "type": "build", + "name": "lpcxpresso51u68" + } + ] + }, + { + "name": "lpcxpresso54114", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso54114" + }, + { + "type": "build", + "name": "lpcxpresso54114" + } + ] + }, + { + "name": "lpcxpresso54608", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso54608" + }, + { + "type": "build", + "name": "lpcxpresso54608" + } + ] + }, + { + "name": "lpcxpresso54628", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso54628" + }, + { + "type": "build", + "name": "lpcxpresso54628" + } + ] + }, + { + "name": "double_m33_express", + "steps": [ + { + "type": "configure", + "name": "double_m33_express" + }, + { + "type": "build", + "name": "double_m33_express" + } + ] + }, + { + "name": "lpcxpresso55s28", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso55s28" + }, + { + "type": "build", + "name": "lpcxpresso55s28" + } + ] + }, + { + "name": "lpcxpresso55s69", + "steps": [ + { + "type": "configure", + "name": "lpcxpresso55s69" + }, + { + "type": "build", + "name": "lpcxpresso55s69" + } + ] + }, + { + "name": "mcu_link", + "steps": [ + { + "type": "configure", + "name": "mcu_link" + }, + { + "type": "build", + "name": "mcu_link" + } + ] + }, + { + "name": "max32650evkit", + "steps": [ + { + "type": "configure", + "name": "max32650evkit" + }, + { + "type": "build", + "name": "max32650evkit" + } + ] + }, + { + "name": "max32650fthr", + "steps": [ + { + "type": "configure", + "name": "max32650fthr" + }, + { + "type": "build", + "name": "max32650fthr" + } + ] + }, + { + "name": "max32651evkit", + "steps": [ + { + "type": "configure", + "name": "max32651evkit" + }, + { + "type": "build", + "name": "max32651evkit" + } + ] + }, + { + "name": "max32666evkit", + "steps": [ + { + "type": "configure", + "name": "max32666evkit" + }, + { + "type": "build", + "name": "max32666evkit" + } + ] + }, + { + "name": "max32666fthr", + "steps": [ + { + "type": "configure", + "name": "max32666fthr" + }, + { + "type": "build", + "name": "max32666fthr" + } + ] + }, + { + "name": "apard32690", + "steps": [ + { + "type": "configure", + "name": "apard32690" + }, + { + "type": "build", + "name": "apard32690" + } + ] + }, + { + "name": "max32690evkit", + "steps": [ + { + "type": "configure", + "name": "max32690evkit" + }, + { + "type": "build", + "name": "max32690evkit" + } + ] + }, + { + "name": "max78002evkit", + "steps": [ + { + "type": "configure", + "name": "max78002evkit" + }, + { + "type": "build", + "name": "max78002evkit" + } + ] + }, + { + "name": "frdm_mcxa153", + "steps": [ + { + "type": "configure", + "name": "frdm_mcxa153" + }, + { + "type": "build", + "name": "frdm_mcxa153" + } + ] + }, + { + "name": "frdm_mcxn947", + "steps": [ + { + "type": "configure", + "name": "frdm_mcxn947" + }, + { + "type": "build", + "name": "frdm_mcxn947" + } + ] + }, + { + "name": "mcxn947brk", + "steps": [ + { + "type": "configure", + "name": "mcxn947brk" + }, + { + "type": "build", + "name": "mcxn947brk" + } + ] + }, + { + "name": "mm32f327x_mb39", + "steps": [ + { + "type": "configure", + "name": "mm32f327x_mb39" + }, + { + "type": "build", + "name": "mm32f327x_mb39" + } + ] + }, + { + "name": "mm32f327x_pitaya_lite", + "steps": [ + { + "type": "configure", + "name": "mm32f327x_pitaya_lite" + }, + { + "type": "build", + "name": "mm32f327x_pitaya_lite" + } + ] + }, + { + "name": "msp_exp430f5529lp", + "steps": [ + { + "type": "configure", + "name": "msp_exp430f5529lp" + }, + { + "type": "build", + "name": "msp_exp430f5529lp" + } + ] + }, + { + "name": "msp_exp432e401y", + "steps": [ + { + "type": "configure", + "name": "msp_exp432e401y" + }, + { + "type": "build", + "name": "msp_exp432e401y" + } + ] + }, + { + "name": "adafruit_clue", + "steps": [ + { + "type": "configure", + "name": "adafruit_clue" + }, + { + "type": "build", + "name": "adafruit_clue" + } + ] + }, + { + "name": "arduino_nano33_ble", + "steps": [ + { + "type": "configure", + "name": "arduino_nano33_ble" + }, + { + "type": "build", + "name": "arduino_nano33_ble" + } + ] + }, + { + "name": "circuitplayground_bluefruit", + "steps": [ + { + "type": "configure", + "name": "circuitplayground_bluefruit" + }, + { + "type": "build", + "name": "circuitplayground_bluefruit" + } + ] + }, + { + "name": "feather_nrf52840_express", + "steps": [ + { + "type": "configure", + "name": "feather_nrf52840_express" + }, + { + "type": "build", + "name": "feather_nrf52840_express" + } + ] + }, + { + "name": "feather_nrf52840_sense", + "steps": [ + { + "type": "configure", + "name": "feather_nrf52840_sense" + }, + { + "type": "build", + "name": "feather_nrf52840_sense" + } + ] + }, + { + "name": "itsybitsy_nrf52840", + "steps": [ + { + "type": "configure", + "name": "itsybitsy_nrf52840" + }, + { + "type": "build", + "name": "itsybitsy_nrf52840" + } + ] + }, + { + "name": "pca10056", + "steps": [ + { + "type": "configure", + "name": "pca10056" + }, + { + "type": "build", + "name": "pca10056" + } + ] + }, + { + "name": "pca10059", + "steps": [ + { + "type": "configure", + "name": "pca10059" + }, + { + "type": "build", + "name": "pca10059" + } + ] + }, + { + "name": "pca10095", + "steps": [ + { + "type": "configure", + "name": "pca10095" + }, + { + "type": "build", + "name": "pca10095" + } + ] + }, + { + "name": "pca10100", + "steps": [ + { + "type": "configure", + "name": "pca10100" + }, + { + "type": "build", + "name": "pca10100" + } + ] + }, + { + "name": "portenta_c33", + "steps": [ + { + "type": "configure", + "name": "portenta_c33" + }, + { + "type": "build", + "name": "portenta_c33" + } + ] + }, + { + "name": "ra2a1_ek", + "steps": [ + { + "type": "configure", + "name": "ra2a1_ek" + }, + { + "type": "build", + "name": "ra2a1_ek" + } + ] + }, + { + "name": "ra4m1_ek", + "steps": [ + { + "type": "configure", + "name": "ra4m1_ek" + }, + { + "type": "build", + "name": "ra4m1_ek" + } + ] + }, + { + "name": "ra4m3_ek", + "steps": [ + { + "type": "configure", + "name": "ra4m3_ek" + }, + { + "type": "build", + "name": "ra4m3_ek" + } + ] + }, + { + "name": "ra6m1_ek", + "steps": [ + { + "type": "configure", + "name": "ra6m1_ek" + }, + { + "type": "build", + "name": "ra6m1_ek" + } + ] + }, + { + "name": "ra6m5_ek", + "steps": [ + { + "type": "configure", + "name": "ra6m5_ek" + }, + { + "type": "build", + "name": "ra6m5_ek" + } + ] + }, + { + "name": "ra8m1_ek", + "steps": [ + { + "type": "configure", + "name": "ra8m1_ek" + }, + { + "type": "build", + "name": "ra8m1_ek" + } + ] + }, + { + "name": "uno_r4", + "steps": [ + { + "type": "configure", + "name": "uno_r4" + }, + { + "type": "build", + "name": "uno_r4" + } + ] + }, + { + "name": "feather_rp2040_max3421", + "steps": [ + { + "type": "configure", + "name": "feather_rp2040_max3421" + }, + { + "type": "build", + "name": "feather_rp2040_max3421" + } + ] + }, + { + "name": "pico_sdk", + "steps": [ + { + "type": "configure", + "name": "pico_sdk" + }, + { + "type": "build", + "name": "pico_sdk" + } + ] + }, + { + "name": "raspberry_pi_pico", + "steps": [ + { + "type": "configure", + "name": "raspberry_pi_pico" + }, + { + "type": "build", + "name": "raspberry_pi_pico" + } + ] + }, + { + "name": "raspberry_pi_pico2", + "steps": [ + { + "type": "configure", + "name": "raspberry_pi_pico2" + }, + { + "type": "build", + "name": "raspberry_pi_pico2" + } + ] + }, + { + "name": "cynthion_d11", + "steps": [ + { + "type": "configure", + "name": "cynthion_d11" + }, + { + "type": "build", + "name": "cynthion_d11" + } + ] + }, + { + "name": "samd11_xplained", + "steps": [ + { + "type": "configure", + "name": "samd11_xplained" + }, + { + "type": "build", + "name": "samd11_xplained" + } + ] + }, + { + "name": "atsamd21_xpro", + "steps": [ + { + "type": "configure", + "name": "atsamd21_xpro" + }, + { + "type": "build", + "name": "atsamd21_xpro" + } + ] + }, + { + "name": "circuitplayground_express", + "steps": [ + { + "type": "configure", + "name": "circuitplayground_express" + }, + { + "type": "build", + "name": "circuitplayground_express" + } + ] + }, + { + "name": "curiosity_nano", + "steps": [ + { + "type": "configure", + "name": "curiosity_nano" + }, + { + "type": "build", + "name": "curiosity_nano" + } + ] + }, + { + "name": "cynthion_d21", + "steps": [ + { + "type": "configure", + "name": "cynthion_d21" + }, + { + "type": "build", + "name": "cynthion_d21" + } + ] + }, + { + "name": "feather_m0_express", + "steps": [ + { + "type": "configure", + "name": "feather_m0_express" + }, + { + "type": "build", + "name": "feather_m0_express" + } + ] + }, + { + "name": "itsybitsy_m0", + "steps": [ + { + "type": "configure", + "name": "itsybitsy_m0" + }, + { + "type": "build", + "name": "itsybitsy_m0" + } + ] + }, + { + "name": "metro_m0_express", + "steps": [ + { + "type": "configure", + "name": "metro_m0_express" + }, + { + "type": "build", + "name": "metro_m0_express" + } + ] + }, + { + "name": "qtpy", + "steps": [ + { + "type": "configure", + "name": "qtpy" + }, + { + "type": "build", + "name": "qtpy" + } + ] + }, + { + "name": "seeeduino_xiao", + "steps": [ + { + "type": "configure", + "name": "seeeduino_xiao" + }, + { + "type": "build", + "name": "seeeduino_xiao" + } + ] + }, + { + "name": "sparkfun_samd21_mini_usb", + "steps": [ + { + "type": "configure", + "name": "sparkfun_samd21_mini_usb" + }, + { + "type": "build", + "name": "sparkfun_samd21_mini_usb" + } + ] + }, + { + "name": "trinket_m0", + "steps": [ + { + "type": "configure", + "name": "trinket_m0" + }, + { + "type": "build", + "name": "trinket_m0" + } + ] + }, + { + "name": "d5035_01", + "steps": [ + { + "type": "configure", + "name": "d5035_01" + }, + { + "type": "build", + "name": "d5035_01" + } + ] + }, + { + "name": "feather_m4_express", + "steps": [ + { + "type": "configure", + "name": "feather_m4_express" + }, + { + "type": "build", + "name": "feather_m4_express" + } + ] + }, + { + "name": "itsybitsy_m4", + "steps": [ + { + "type": "configure", + "name": "itsybitsy_m4" + }, + { + "type": "build", + "name": "itsybitsy_m4" + } + ] + }, + { + "name": "metro_m4_express", + "steps": [ + { + "type": "configure", + "name": "metro_m4_express" + }, + { + "type": "build", + "name": "metro_m4_express" + } + ] + }, + { + "name": "pybadge", + "steps": [ + { + "type": "configure", + "name": "pybadge" + }, + { + "type": "build", + "name": "pybadge" + } + ] + }, + { + "name": "pyportal", + "steps": [ + { + "type": "configure", + "name": "pyportal" + }, + { + "type": "build", + "name": "pyportal" + } + ] + }, + { + "name": "same54_xplained", + "steps": [ + { + "type": "configure", + "name": "same54_xplained" + }, + { + "type": "build", + "name": "same54_xplained" + } + ] + }, + { + "name": "samg55_xplained", + "steps": [ + { + "type": "configure", + "name": "samg55_xplained" + }, + { + "type": "build", + "name": "samg55_xplained" + } + ] + }, + { + "name": "atsaml21_xpro", + "steps": [ + { + "type": "configure", + "name": "atsaml21_xpro" + }, + { + "type": "build", + "name": "atsaml21_xpro" + } + ] + }, + { + "name": "saml22_feather", + "steps": [ + { + "type": "configure", + "name": "saml22_feather" + }, + { + "type": "build", + "name": "saml22_feather" + } + ] + }, + { + "name": "sensorwatch_m0", + "steps": [ + { + "type": "configure", + "name": "sensorwatch_m0" + }, + { + "type": "build", + "name": "sensorwatch_m0" + } + ] + }, + { + "name": "stm32c071nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32c071nucleo" + }, + { + "type": "build", + "name": "stm32c071nucleo" + } + ] + }, + { + "name": "stm32f070rbnucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f070rbnucleo" + }, + { + "type": "build", + "name": "stm32f070rbnucleo" + } + ] + }, + { + "name": "stm32f072disco", + "steps": [ + { + "type": "configure", + "name": "stm32f072disco" + }, + { + "type": "build", + "name": "stm32f072disco" + } + ] + }, + { + "name": "stm32f072eval", + "steps": [ + { + "type": "configure", + "name": "stm32f072eval" + }, + { + "type": "build", + "name": "stm32f072eval" + } + ] + }, + { + "name": "stm32f103ze_iar", + "steps": [ + { + "type": "configure", + "name": "stm32f103ze_iar" + }, + { + "type": "build", + "name": "stm32f103ze_iar" + } + ] + }, + { + "name": "stm32f103_bluepill", + "steps": [ + { + "type": "configure", + "name": "stm32f103_bluepill" + }, + { + "type": "build", + "name": "stm32f103_bluepill" + } + ] + }, + { + "name": "stm32f103_mini_2", + "steps": [ + { + "type": "configure", + "name": "stm32f103_mini_2" + }, + { + "type": "build", + "name": "stm32f103_mini_2" + } + ] + }, + { + "name": "stm32f207nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f207nucleo" + }, + { + "type": "build", + "name": "stm32f207nucleo" + } + ] + }, + { + "name": "stm32f303disco", + "steps": [ + { + "type": "configure", + "name": "stm32f303disco" + }, + { + "type": "build", + "name": "stm32f303disco" + } + ] + }, + { + "name": "feather_stm32f405", + "steps": [ + { + "type": "configure", + "name": "feather_stm32f405" + }, + { + "type": "build", + "name": "feather_stm32f405" + } + ] + }, + { + "name": "pyboardv11", + "steps": [ + { + "type": "configure", + "name": "pyboardv11" + }, + { + "type": "build", + "name": "pyboardv11" + } + ] + }, + { + "name": "stm32f401blackpill", + "steps": [ + { + "type": "configure", + "name": "stm32f401blackpill" + }, + { + "type": "build", + "name": "stm32f401blackpill" + } + ] + }, + { + "name": "stm32f407blackvet", + "steps": [ + { + "type": "configure", + "name": "stm32f407blackvet" + }, + { + "type": "build", + "name": "stm32f407blackvet" + } + ] + }, + { + "name": "stm32f407disco", + "steps": [ + { + "type": "configure", + "name": "stm32f407disco" + }, + { + "type": "build", + "name": "stm32f407disco" + } + ] + }, + { + "name": "stm32f411blackpill", + "steps": [ + { + "type": "configure", + "name": "stm32f411blackpill" + }, + { + "type": "build", + "name": "stm32f411blackpill" + } + ] + }, + { + "name": "stm32f411disco", + "steps": [ + { + "type": "configure", + "name": "stm32f411disco" + }, + { + "type": "build", + "name": "stm32f411disco" + } + ] + }, + { + "name": "stm32f412disco", + "steps": [ + { + "type": "configure", + "name": "stm32f412disco" + }, + { + "type": "build", + "name": "stm32f412disco" + } + ] + }, + { + "name": "stm32f412nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f412nucleo" + }, + { + "type": "build", + "name": "stm32f412nucleo" + } + ] + }, + { + "name": "stm32f439nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f439nucleo" + }, + { + "type": "build", + "name": "stm32f439nucleo" + } + ] + }, + { + "name": "stlinkv3mini", + "steps": [ + { + "type": "configure", + "name": "stlinkv3mini" + }, + { + "type": "build", + "name": "stlinkv3mini" + } + ] + }, + { + "name": "stm32f723disco", + "steps": [ + { + "type": "configure", + "name": "stm32f723disco" + }, + { + "type": "build", + "name": "stm32f723disco" + } + ] + }, + { + "name": "stm32f746disco", + "steps": [ + { + "type": "configure", + "name": "stm32f746disco" + }, + { + "type": "build", + "name": "stm32f746disco" + } + ] + }, + { + "name": "stm32f746nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f746nucleo" + }, + { + "type": "build", + "name": "stm32f746nucleo" + } + ] + }, + { + "name": "stm32f767nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32f767nucleo" + }, + { + "type": "build", + "name": "stm32f767nucleo" + } + ] + }, + { + "name": "stm32f769disco", + "steps": [ + { + "type": "configure", + "name": "stm32f769disco" + }, + { + "type": "build", + "name": "stm32f769disco" + } + ] + }, + { + "name": "stm32g0b1nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32g0b1nucleo" + }, + { + "type": "build", + "name": "stm32g0b1nucleo" + } + ] + }, + { + "name": "b_g474e_dpow1", + "steps": [ + { + "type": "configure", + "name": "b_g474e_dpow1" + }, + { + "type": "build", + "name": "b_g474e_dpow1" + } + ] + }, + { + "name": "stm32g474nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32g474nucleo" + }, + { + "type": "build", + "name": "stm32g474nucleo" + } + ] + }, + { + "name": "stm32g491nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32g491nucleo" + }, + { + "type": "build", + "name": "stm32g491nucleo" + } + ] + }, + { + "name": "stm32h503nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h503nucleo" + }, + { + "type": "build", + "name": "stm32h503nucleo" + } + ] + }, + { + "name": "stm32h563nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h563nucleo" + }, + { + "type": "build", + "name": "stm32h563nucleo" + } + ] + }, + { + "name": "stm32h573i_dk", + "steps": [ + { + "type": "configure", + "name": "stm32h573i_dk" + }, + { + "type": "build", + "name": "stm32h573i_dk" + } + ] + }, + { + "name": "daisyseed", + "steps": [ + { + "type": "configure", + "name": "daisyseed" + }, + { + "type": "build", + "name": "daisyseed" + } + ] + }, + { + "name": "stm32h723nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h723nucleo" + }, + { + "type": "build", + "name": "stm32h723nucleo" + } + ] + }, + { + "name": "stm32h743eval", + "steps": [ + { + "type": "configure", + "name": "stm32h743eval" + }, + { + "type": "build", + "name": "stm32h743eval" + } + ] + }, + { + "name": "stm32h743nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h743nucleo" + }, + { + "type": "build", + "name": "stm32h743nucleo" + } + ] + }, + { + "name": "stm32h745disco", + "steps": [ + { + "type": "configure", + "name": "stm32h745disco" + }, + { + "type": "build", + "name": "stm32h745disco" + } + ] + }, + { + "name": "stm32h750bdk", + "steps": [ + { + "type": "configure", + "name": "stm32h750bdk" + }, + { + "type": "build", + "name": "stm32h750bdk" + } + ] + }, + { + "name": "stm32h750_weact", + "steps": [ + { + "type": "configure", + "name": "stm32h750_weact" + }, + { + "type": "build", + "name": "stm32h750_weact" + } + ] + }, + { + "name": "waveshare_openh743i", + "steps": [ + { + "type": "configure", + "name": "waveshare_openh743i" + }, + { + "type": "build", + "name": "waveshare_openh743i" + } + ] + }, + { + "name": "stm32h7s3nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32h7s3nucleo" + }, + { + "type": "build", + "name": "stm32h7s3nucleo" + } + ] + }, + { + "name": "stm32l052dap52", + "steps": [ + { + "type": "configure", + "name": "stm32l052dap52" + }, + { + "type": "build", + "name": "stm32l052dap52" + } + ] + }, + { + "name": "stm32l0538disco", + "steps": [ + { + "type": "configure", + "name": "stm32l0538disco" + }, + { + "type": "build", + "name": "stm32l0538disco" + } + ] + }, + { + "name": "stm32l412nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32l412nucleo" + }, + { + "type": "build", + "name": "stm32l412nucleo" + } + ] + }, + { + "name": "stm32l476disco", + "steps": [ + { + "type": "configure", + "name": "stm32l476disco" + }, + { + "type": "build", + "name": "stm32l476disco" + } + ] + }, + { + "name": "stm32l4p5nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32l4p5nucleo" + }, + { + "type": "build", + "name": "stm32l4p5nucleo" + } + ] + }, + { + "name": "stm32l4r5nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32l4r5nucleo" + }, + { + "type": "build", + "name": "stm32l4r5nucleo" + } + ] + }, + { + "name": "b_u585i_iot2a", + "steps": [ + { + "type": "configure", + "name": "b_u585i_iot2a" + }, + { + "type": "build", + "name": "b_u585i_iot2a" + } + ] + }, + { + "name": "stm32u545nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32u545nucleo" + }, + { + "type": "build", + "name": "stm32u545nucleo" + } + ] + }, + { + "name": "stm32u575eval", + "steps": [ + { + "type": "configure", + "name": "stm32u575eval" + }, + { + "type": "build", + "name": "stm32u575eval" + } + ] + }, + { + "name": "stm32u575nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32u575nucleo" + }, + { + "type": "build", + "name": "stm32u575nucleo" + } + ] + }, + { + "name": "stm32u5a5nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32u5a5nucleo" + }, + { + "type": "build", + "name": "stm32u5a5nucleo" + } + ] + }, + { + "name": "stm32wb55nucleo", + "steps": [ + { + "type": "configure", + "name": "stm32wb55nucleo" + }, + { + "type": "build", + "name": "stm32wb55nucleo" + } + ] + }, + { + "name": "ek_tm4c123gxl", + "steps": [ + { + "type": "configure", + "name": "ek_tm4c123gxl" + }, + { + "type": "build", + "name": "ek_tm4c123gxl" + } + ] + }, + { + "name": "xmc4500_relax", + "steps": [ + { + "type": "configure", + "name": "xmc4500_relax" + }, + { + "type": "build", + "name": "xmc4500_relax" + } + ] + }, + { + "name": "xmc4700_relax", + "steps": [ + { + "type": "configure", + "name": "xmc4700_relax" + }, + { + "type": "build", + "name": "xmc4700_relax" + } + ] + } + ] +} diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 04d537376..409fb9c75 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -399,7 +399,11 @@ endfunction() # Add flash jlink target function(family_flash_jlink TARGET) if (NOT DEFINED JLINKEXE) - set(JLINKEXE JLinkExe) + if(CMAKE_HOST_WIN32) + set(JLINKEXE JLink.exe) + else() + set(JLINKEXE JLinkExe) + endif() endif () if (NOT DEFINED JLINK_IF) diff --git a/tools/gen_presets.py b/tools/gen_presets.py new file mode 100755 index 000000000..98b1a7d46 --- /dev/null +++ b/tools/gen_presets.py @@ -0,0 +1,91 @@ +#!/usr/bin/env python3 +import os +import json + + +def main(): + board_list = [] + + # Find all board.cmake files + for root, dirs, files in os.walk("hw/bsp"): + for file in files: + if file == "board.cmake": + board_list.append(os.path.basename(root)) + + print('Generating presets for the following boards:') + print(board_list) + + # Generate the presets + presets = {} + presets['version'] = 6 + + # Configure presets + presets['configurePresets'] = [ + {"name": "default", + "hidden": True, + "description": r"Configure preset for the ${presetName} board", + "generator": "Ninja", + "binaryDir": r"${sourceDir}/build/${presetName}", + "cacheVariables": { + "CMAKE_BUILD_TYPE": "RelWithDebInfo", + "BOARD": r"${presetName}" + } + }] + + presets['configurePresets'].extend( + [{'name': board, 'inherits': 'default'} for board in board_list] + ) + + # Build presets + # no inheritance since 'name' doesn't support macro expansion + presets['buildPresets'] = [ + { + 'name': board, + 'description': "Build preset for the " + board + " board", + 'configurePreset': board + } + for board in board_list + ] + + # Workflow presets + presets['workflowPresets'] = [ + { + "name": board, + "steps": [ + { + "type": "configure", + "name": board + }, + { + "type": "build", + "name": board + } + ] + } + for board in board_list + ] + + with open("hw/bsp/BoardPresets.json", "w") as f: + f.write('{}\n'.format(json.dumps(presets, indent=2))) + + # Generate presets for examples + presets = { + "version": 6, + "include": [ + "../../../hw/bsp/BoardPresets.json" + ] + } + + example_list = [] + for root, dirs, files in os.walk("examples"): + for file in files: + if file == "CMakeLists.txt": + with open(os.path.join(root, 'CMakePresets.json'), 'w') as f: + f.write('{}\n'.format(json.dumps(presets, indent=2))) + example_list.append(os.path.basename(root)) + + print('Generating presets for the following examples:') + print(example_list) + +if __name__ == "__main__": + main() -- cgit v1.3.1 From 65e44e0a51272f9d75719d90955f19209dbf1ea2 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Mar 2025 22:46:21 +0700 Subject: fix(dwc2) host driver conflict with max3421e --- examples/host/bare_api/src/tusb_config.h | 3 ++- examples/host/cdc_msc_hid/src/tusb_config.h | 3 ++- examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 3 ++- examples/host/device_info/src/tusb_config.h | 3 ++- examples/host/hid_controller/src/tusb_config.h | 3 ++- examples/host/msc_file_explorer/src/tusb_config.h | 3 ++- src/portable/synopsys/dwc2/hcd_dwc2.c | 2 +- 7 files changed, 13 insertions(+), 7 deletions(-) (limited to 'examples/host/bare_api') diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index fab233be0..a03675c5f 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index a59a0ffb9..cc8d6e5c4 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 02de4197b..682265f59 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -74,9 +74,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 5190b5b1f..db02a97db 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -74,9 +74,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index 3ac591d8f..351fe0178 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index c798b4383..c1829c300 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index ebbb6200a..b13479b02 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -26,7 +26,7 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && defined(TUP_USBIP_DWC2) +#if CFG_TUH_ENABLED && defined(TUP_USBIP_DWC2) && !CFG_TUH_MAX3421 #if !(CFG_TUH_DWC2_SLAVE_ENABLE || CFG_TUH_DWC2_DMA_ENABLE) #error DWC2 require either CFG_TUH_DWC2_SLAVE_ENABLE or CFG_TUH_DWC2_DMA_ENABLE to be enabled -- cgit v1.3.1 From 65e01fff2e7ab5302baa45bdd81a1d774e269452 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 16:15:58 +0700 Subject: add tuh_edpt_close() API, it will abort any pending transfer implement hcd_edpt_close() for pio-usb and max3421e, also move max3421e api into its own header. --- examples/host/bare_api/src/main.c | 254 +++++++++++-------------- src/host/hcd.h | 3 + src/host/usbh.c | 6 + src/host/usbh.h | 7 + src/portable/analog/max3421/hcd_max3421.c | 40 ++-- src/portable/analog/max3421/hcd_max3421.h | 63 ++++++ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 5 + tools/get_deps.py | 4 +- 8 files changed, 218 insertions(+), 164 deletions(-) create mode 100644 src/portable/analog/max3421/hcd_max3421.h (limited to 'examples/host/bare_api') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index f582f4f5a..0c76ff0c9 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -55,16 +55,15 @@ uint8_t* get_hid_buf(uint8_t daddr); void free_hid_buf(uint8_t daddr); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Bare API Example\r\n"); // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .role = TUSB_ROLE_HOST, - .speed = TUSB_SPEED_AUTO + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUH_RHPORT, &host_init); @@ -72,8 +71,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { // tinyusb host task tuh_task(); led_blinking_task(); @@ -85,8 +83,7 @@ int main(void) /*------------- TinyUSB Callbacks -------------*/ // Invoked when device is mounted (configured) -void tuh_mount_cb (uint8_t daddr) -{ +void tuh_mount_cb(uint8_t daddr) { printf("Device attached, address = %d\r\n", daddr); // Get Device Descriptor @@ -95,8 +92,7 @@ void tuh_mount_cb (uint8_t daddr) } /// Invoked when device is unmounted (bus reset/unplugged) -void tuh_umount_cb(uint8_t daddr) -{ +void tuh_umount_cb(uint8_t daddr) { printf("Device removed, address = %d\r\n", daddr); free_hid_buf(daddr); } @@ -104,11 +100,8 @@ void tuh_umount_cb(uint8_t daddr) //--------------------------------------------------------------------+ // Device Descriptor //--------------------------------------------------------------------+ - -void print_device_descriptor(tuh_xfer_t* xfer) -{ - if ( XFER_RESULT_SUCCESS != xfer->result ) - { +void print_device_descriptor(tuh_xfer_t *xfer) { + if (XFER_RESULT_SUCCESS != xfer->result) { printf("Failed to get device descriptor\r\n"); return; } @@ -131,33 +124,29 @@ void print_device_descriptor(tuh_xfer_t* xfer) // Get String descriptor using Sync API uint16_t temp_buf[128]; - printf(" iManufacturer %u " , desc_device.iManufacturer); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) ) - { + printf(" iManufacturer %u ", desc_device.iManufacturer); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iProduct %u " , desc_device.iProduct); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iProduct %u ", desc_device.iProduct); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iSerialNumber %u " , desc_device.iSerialNumber); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iSerialNumber %u ", desc_device.iSerialNumber); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); // Get configuration descriptor with sync API - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) - { - parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) { + parse_config_descriptor(daddr, (tusb_desc_configuration_t *) temp_buf); } } @@ -171,37 +160,33 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); // simple configuration parser to open and listen to HID Endpoint IN -void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) -{ - uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); - uint8_t const* p_desc = tu_desc_next(desc_cfg); +void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const *desc_cfg) { + uint8_t const *desc_end = ((uint8_t const *) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); + uint8_t const *p_desc = tu_desc_next(desc_cfg); // parse each interfaces - while( p_desc < desc_end ) - { + while (p_desc < desc_end) { uint8_t assoc_itf_count = 1; // Class will always starts with Interface Association (if any) and then Interface descriptor - if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) - { - tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; + if (TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc)) { + tusb_desc_interface_assoc_t const *desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; assoc_itf_count = desc_iad->bInterfaceCount; - p_desc = tu_desc_next(p_desc); // next to Interface + p_desc = tu_desc_next(p_desc);// next to Interface } // must be interface from now - if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return; - tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc; + if (TUSB_DESC_INTERFACE != tu_desc_type(p_desc)) { return; } + tusb_desc_interface_t const *desc_itf = (tusb_desc_interface_t const *) p_desc; - uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc)); + uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end - p_desc)); // probably corrupted descriptor - if(drv_len < sizeof(tusb_desc_interface_t)) return; + if (drv_len < sizeof(tusb_desc_interface_t)) { return; } // only open and listen to HID endpoint IN - if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) - { + if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) { open_hid_interface(dev_addr, desc_itf, drv_len); } @@ -210,25 +195,21 @@ void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* } } -uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len) -{ - uint8_t const* p_desc = (uint8_t const*) desc_itf; +uint16_t count_interface_total_len(tusb_desc_interface_t const *desc_itf, uint8_t itf_count, uint16_t max_len) { + uint8_t const *p_desc = (uint8_t const *) desc_itf; uint16_t len = 0; - while (itf_count--) - { + while (itf_count--) { // Next on interface desc len += tu_desc_len(desc_itf); p_desc = tu_desc_next(p_desc); - while (len < max_len) - { + while (len < max_len) { // return on IAD regardless of itf count - if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len; + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { return len; } - if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && - ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 ) - { + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && + ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == 0) { break; } @@ -246,46 +227,45 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void hid_report_received(tuh_xfer_t* xfer); -void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) -{ +void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) { // len = interface + hid + n*endpoints uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); // corrupted descriptor - if (max_len < drv_len) return; + if (max_len < drv_len) { return; } uint8_t const *p_desc = (uint8_t const *) desc_itf; // HID descriptor p_desc = tu_desc_next(p_desc); tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc; - if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return; + if (HID_DESC_TYPE_HID != desc_hid->bDescriptorType) { return; } // Endpoint descriptor p_desc = tu_desc_next(p_desc); - tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc; - - for(int i = 0; i < desc_itf->bNumEndpoints; i++) - { - if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return; - - if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { - // skip if failed to open endpoint - if ( ! tuh_edpt_open(daddr, desc_ep) ) return; - - uint8_t* buf = get_hid_buf(daddr); - if (!buf) return; // out of memory - - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = desc_ep->bEndpointAddress, - .buflen = 64, - .buffer = buf, - .complete_cb = hid_report_received, - .user_data = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + + for (int i = 0; i < desc_itf->bNumEndpoints; i++) { + if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) { return; } + + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + if (!tuh_edpt_open(daddr, desc_ep)) { + return; // skip if failed to open endpoint + } + + uint8_t *buf = get_hid_buf(daddr); + if (!buf) { + return;// out of memory + } + + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = desc_ep->bEndpointAddress, + .buflen = 64, + .buffer = buf, + .complete_cb = hid_report_received, + .user_data = (uintptr_t) buf,// since buffer is not available in callback, use user data to store the buffer }; // submit transfer for this EP @@ -299,18 +279,17 @@ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, ui } } -void hid_report_received(tuh_xfer_t* xfer) -{ +void hid_report_received(tuh_xfer_t *xfer) { // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback - uint8_t* buf = (uint8_t*) xfer->user_data; + uint8_t *buf = (uint8_t *) xfer->user_data; - if (xfer->result == XFER_RESULT_SUCCESS) - { + if (xfer->result == XFER_RESULT_SUCCESS) { printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr); - for(uint32_t i=0; iactual_len; i++) - { - if (i%16 == 0) printf("\r\n "); + for (uint32_t i = 0; i < xfer->actual_len; i++) { + if (i % 16 == 0) { + printf("\r\n "); + } printf("%02X ", buf[i]); } printf("\r\n"); @@ -329,12 +308,9 @@ void hid_report_received(tuh_xfer_t* xfer) //--------------------------------------------------------------------+ // get an buffer from pool -uint8_t* get_hid_buf(uint8_t daddr) -{ - for(size_t i=0; i> 6 & 0x1F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } else { - // TODO: Verify surrogate. - *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } - // TODO: Handle UTF-16 code points that take two entries. + // TODO: Check for runover. + (void) utf8_len; + // Get the UTF-16 length out of the data itself. + + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t) (0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t) (0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); } + // TODO: Handle UTF-16 code points that take two entries. + } } // Count how many bytes a utf-16-le encoded string will take in utf-8. static int _count_utf8_bytes(const uint16_t *buf, size_t len) { - size_t total_bytes = 0; - for (size_t i = 0; i < len; i++) { - uint16_t chr = buf[i]; - if (chr < 0x80) { - total_bytes += 1; - } else if (chr < 0x800) { - total_bytes += 2; - } else { - total_bytes += 3; - } - // TODO: Handle UTF-16 code points that take two entries. + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; } - return (int) total_bytes; + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { - if ((temp_buf[0] & 0xff) == 0) return; // empty - size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); - size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); - _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); - ((uint8_t*) temp_buf)[utf8_len] = '\0'; + if ((temp_buf[0] & 0xff) == 0) return;// empty + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t *) temp_buf)[utf8_len] = '\0'; - printf("%s", (char*)temp_buf); + printf("%s", (char *) temp_buf); } diff --git a/src/host/hcd.h b/src/host/hcd.h index 56b6fdb5d..aa9e9cf3b 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -165,6 +165,9 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); // Open an endpoint bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); +// Close an endpoint +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); + // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); diff --git a/src/host/usbh.c b/src/host/usbh.c index 308916c9b..5925a7be0 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -994,6 +994,12 @@ bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const* desc_ep) { return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr) { + TU_VERIFY(0 != tu_edpt_number(ep_addr)); // cannot close EP0 + tuh_edpt_abort_xfer(daddr, ep_addr); // abort any pending transfer + return hcd_edpt_close(usbh_get_rhport(daddr), daddr, ep_addr); +} + bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev); diff --git a/src/host/usbh.h b/src/host/usbh.h index d95bb9b57..4829a8183 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -33,6 +33,10 @@ #include "common/tusb_common.h" +#if CFG_TUH_MAX3421 +#include "portable/analog/max3421/hcd_max3421.h" +#endif + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -227,6 +231,9 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer); // Open a non-control endpoint bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); +// Close a non-control endpoint, it will abort any pending transfer +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr); + // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index c5e924266..3fbf950a4 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -252,28 +252,6 @@ static tuh_configure_max3421_t _tuh_cfg = { .pinctl = 0, // default: negative edge interrupt }; -//--------------------------------------------------------------------+ -// API: SPI transfer with MAX3421E -// - spi_cs_api(), spi_xfer_api(), int_api(): must be implemented by application -// - reg_read(), reg_write(): is implemented by this driver, can be used by application -//--------------------------------------------------------------------+ - -// API to control MAX3421 SPI CS -extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); - -// API to transfer data with MAX3421 SPI -// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only -extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); - -// API to enable/disable MAX3421 INTR pin interrupt -extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); - -// API to read MAX3421's register. Implemented by TinyUSB -uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); - -// API to write MAX3421's register. Implemented by TinyUSB -bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); - //--------------------------------------------------------------------+ // SPI Commands and Helper //--------------------------------------------------------------------+ @@ -632,6 +610,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e if (daddr == 0 && ep_num == 0) { ep = &_hcd_data.ep[0]; }else { + if (NULL != find_ep_not_addr0(daddr, ep_num, ep_dir)) { + return false; // endpoint already opened + } ep = allocate_ep(); TU_ASSERT(ep); ep->daddr = daddr; @@ -645,6 +626,21 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const ep_dir = tu_edpt_dir(ep_addr); + max3421_ep_t * ep = find_ep_not_addr0(daddr, ep_num, ep_dir); + + if (!ep) { + return false; // not opened + } + + tu_memclr(ep, sizeof(max3421_ep_t)); + + return true; +} + /* The microcontroller repeatedly writes the SNDFIFO register R2 to load the FIFO with up to 64 data bytes. * Then the microcontroller writes the SNDBC register, which this does three things: * 1. Tells the MAX3421E SIE (Serial Interface Engine) how many bytes in the FIFO to send. diff --git a/src/portable/analog/max3421/hcd_max3421.h b/src/portable/analog/max3421/hcd_max3421.h new file mode 100644 index 000000000..4631fa21a --- /dev/null +++ b/src/portable/analog/max3421/hcd_max3421.h @@ -0,0 +1,63 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_HCD_MAX3421_H +#define TUSB_HCD_MAX3421_H + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// SPI transfer API with MAX3421E are implemented by application +// - spi_cs_api(), spi_xfer_api(), int_api() +//--------------------------------------------------------------------+ + +// API to control MAX3421 SPI CS +extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); + +// API to enable/disable MAX3421 INTR pin interrupt +extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); + +//--------------------------------------------------------------------+ +// API for read/write MAX3421 registers +// are implemented by this driver, can be used by application +//--------------------------------------------------------------------+ + +// API to read MAX3421's register. Implemented by TinyUSB +uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); + +// API to write MAX3421's register. Implemented by TinyUSB +bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 6422afff1..225a44dcf 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -122,6 +122,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const *) desc_ep, need_pre); } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + uint8_t const pio_rhport = RHPORT_PIO(rhport); + return pio_usb_host_endpoint_close(pio_rhport, daddr, ep_addr); +} + bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen); diff --git a/tools/get_deps.py b/tools/get_deps.py index 3f529bd7e..ba9dc23ce 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -58,8 +58,8 @@ deps_optional = { 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], - 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - '0ca3657d55ea20e7fa4483bbd21ce951bc1d6fa5', + 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', + '810653f66adadba3e0e4b4b56d5167ac4f7fdbf7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1