From 3f788a4e5a7758ce51cbcadef4ac21e427cc3c56 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 31 Jul 2023 19:09:40 +0700 Subject: enable USBMC for uno r4, add board_init_after_tusb() API add BOARD_UPPERCASE for board detection --- examples/host/hid_controller/src/main.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'examples/host/hid_controller/src') diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 4dcc92587..a4ab2f711 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -54,6 +54,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task -- cgit v1.3.1 From cf91660cee0863291fd9412a3623df018e8bd071 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 15:44:05 +0700 Subject: rename hw/bsp/board.h to board_api.h --- examples/device/audio_4_channel_mic/src/main.c | 2 +- examples/device/audio_test/src/main.c | 2 +- examples/device/audio_test_multi_rate/src/main.c | 2 +- examples/device/board_test/src/main.c | 2 +- examples/device/cdc_dual_ports/src/main.c | 2 +- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_msc/src/msc_disk.c | 2 +- examples/device/cdc_msc_freertos/src/main.c | 2 +- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 +- examples/device/cdc_uac2/src/cdc_app.c | 2 +- examples/device/cdc_uac2/src/main.c | 2 +- examples/device/cdc_uac2/src/uac2_app.c | 2 +- examples/device/dfu/src/main.c | 2 +- examples/device/dfu_runtime/src/main.c | 2 +- examples/device/dynamic_configuration/src/main.c | 2 +- .../device/dynamic_configuration/src/msc_disk.c | 2 +- .../dynamic_configuration/src/usb_descriptors.c | 2 +- examples/device/hid_composite/src/main.c | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- examples/device/hid_generic_inout/src/main.c | 2 +- examples/device/hid_multiple_interface/src/main.c | 2 +- examples/device/midi_test/src/main.c | 2 +- examples/device/msc_dual_lun/src/main.c | 2 +- examples/device/msc_dual_lun/src/msc_disk_dual.c | 2 +- examples/device/net_lwip_webserver/src/main.c | 2 +- examples/device/uac2_headset/src/main.c | 2 +- examples/device/usbtmc/src/main.c | 2 +- examples/device/usbtmc/src/usbtmc_app.c | 2 +- examples/device/video_capture/src/main.c | 2 +- examples/device/webusb_serial/src/main.c | 2 +- examples/dual/host_hid_to_device_cdc/src/main.c | 2 +- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid/src/hid_app.c | 2 +- examples/host/cdc_msc_hid/src/main.c | 2 +- examples/host/hid_controller/src/hid_app.c | 2 +- examples/host/hid_controller/src/main.c | 2 +- examples/host/msc_file_explorer/src/main.c | 2 +- examples/host/msc_file_explorer/src/msc_app.c | 2 +- hw/bsp/board.c | 2 +- hw/bsp/board.h | 144 --------------------- hw/bsp/board_api.h | 137 ++++++++++++++++++++ hw/bsp/ea4357/ea4357.c | 2 +- hw/bsp/fomu/fomu.c | 2 +- hw/bsp/gd32vf103/family.c | 2 +- hw/bsp/ngx4330/ngx4330.c | 2 +- hw/bsp/rp2040/family.c | 2 +- hw/bsp/sltb009a/sltb009a.c | 2 +- hw/bsp/stm32l4/family.c | 2 +- 49 files changed, 184 insertions(+), 191 deletions(-) delete mode 100644 hw/bsp/board.h create mode 100644 hw/bsp/board_api.h (limited to 'examples/host/hid_controller/src') diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 2b9c5143d..0336f0ef0 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -35,7 +35,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index b5ca41d36..9910b496f 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -35,7 +35,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 078e783eb..9715ff761 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -36,7 +36,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index b11f6f2bb..0a134a2e6 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPES diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 70eaea85d..5645a953c 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -28,7 +28,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //------------- prototypes -------------// diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 6dad73cbf..fa303e061 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index f8f37a577..d2f8628f1 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 0e8a24d02..fa26771d5 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 707c8d578..9520dfec1 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/cdc_uac2/src/cdc_app.c b/examples/device/cdc_uac2/src/cdc_app.c index a95f638d9..2166c1d6b 100644 --- a/examples/device/cdc_uac2/src/cdc_app.c +++ b/examples/device/cdc_uac2/src/cdc_app.c @@ -24,7 +24,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "common.h" diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index 68352338e..7afa96c1a 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -28,7 +28,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "common.h" diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index 33dc33122..98659ea68 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" #include "common.h" diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 5f37f25e1..ab9697a87 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -42,7 +42,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 4ec3cb188..85b51449e 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -40,7 +40,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 578f01d8c..4e80ef9c4 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index 27856a1a4..10c3ac6fe 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 71348abef..039c7636c 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -24,7 +24,7 @@ */ #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 8d0e6bece..94e43df17 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ca02af100..1241f8edb 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 5db8f5581..55d6bbf21 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" /* This example demonstrate HID Generic raw Input & Output. diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 72240b208..dc5d3d7cc 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 2c3e9d954..734a0dae4 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" /* This MIDI example send sequence of note (on/off) repeatedly. To test on PC, you need to install diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index c7f6de7bf..38b658332 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index b1047acdb..4f0f6410f 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 19a0eae9d..2e432232e 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -43,7 +43,7 @@ The smartphone may be artificially picky about which Ethernet MAC address to rec try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00 (clearing bit 1). */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "dhserver.h" diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 19a3f7bae..245370bb3 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -26,7 +26,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 2bba336f1..71f352905 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usbtmc_app.h" //--------------------------------------------------------------------+ diff --git a/examples/device/usbtmc/src/usbtmc_app.c b/examples/device/usbtmc/src/usbtmc_app.c index 72989b4fe..fb25982c7 100644 --- a/examples/device/usbtmc/src/usbtmc_app.c +++ b/examples/device/usbtmc/src/usbtmc_app.c @@ -26,7 +26,7 @@ #include #include /* atoi */ #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "main.h" #if (CFG_TUD_USBTMC_ENABLE_488) diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 5654e0b61..589fc448c 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index eaca78c73..675c593dd 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -47,7 +47,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 817c63c70..74f0a2a41 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -30,7 +30,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index bb7fa850e..a50fd33b5 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -32,7 +32,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" // English diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index 7769d109e..a1b26e49c 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -25,7 +25,7 @@ */ #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 87e110ab2..7727ee62c 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 1f4acb822..3d2567849 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index 76de97b41..bff830ca2 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" /* From https://www.kernel.org/doc/html/latest/input/gamepad.html diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 4dcc92587..f4f6bda28 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -32,7 +32,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 7b1c2ef27..ced6e01a9 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -59,7 +59,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index 003e2865b..323dfb9e7 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -25,7 +25,7 @@ #include #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "ff.h" #include "diskio.h" diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 7804a18e0..417630a03 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -23,7 +23,7 @@ * */ -#include "board.h" +#include "board_api.h" //--------------------------------------------------------------------+ // newlib read()/write() retarget diff --git a/hw/bsp/board.h b/hw/bsp/board.h deleted file mode 100644 index 036556731..000000000 --- a/hw/bsp/board.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/** \ingroup group_demo - * \defgroup group_board Boards Abstraction Layer - * @{ */ - -#ifndef _BSP_BOARD_H_ -#define _BSP_BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#include -#include - -#include "ansi_escape.h" -#include "tusb.h" - -// Define the default baudrate -#ifndef CFG_BOARD_UART_BAUDRATE -#define CFG_BOARD_UART_BAUDRATE 115200 ///< Default baud rate -#endif - -//--------------------------------------------------------------------+ -// Board Porting API -// For simplicity, only one LED and one Button are used -//--------------------------------------------------------------------+ - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void); - -// Turn LED on or off -void board_led_write(bool state); - -// Control led pattern using phase duration in ms. -// For each phase, LED is toggle then repeated, board_led_task() is required to be called -//void board_led_pattern(uint32_t const phase_ms[], uint8_t count); - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void); - -// Get characters from UART -// Return number of read bytes -int board_uart_read(uint8_t* buf, int len); - -// Send characters to UART -// Return number of sent bytes -int board_uart_write(void const * buf, int len); - -#if CFG_TUSB_OS == OPT_OS_NONE - // Get current milliseconds, must be implemented when no RTOS is used - uint32_t board_millis(void); - -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - static inline uint32_t board_millis(void) - { - return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); - } - -#elif CFG_TUSB_OS == OPT_OS_MYNEWT - static inline uint32_t board_millis(void) - { - return os_time_ticks_to_ms32( os_time_get() ); - } - -#elif CFG_TUSB_OS == OPT_OS_PICO - #include "pico/time.h" - static inline uint32_t board_millis(void) - { - return to_ms_since_boot(get_absolute_time()); - } - -#elif CFG_TUSB_OS == OPT_OS_RTTHREAD - static inline uint32_t board_millis(void) - { - return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); - } - -#else - #error "board_millis() is not implemented for this OS" -#endif - -//--------------------------------------------------------------------+ -// Helper functions -//--------------------------------------------------------------------+ -static inline void board_led_on(void) -{ - board_led_write(true); -} - -static inline void board_led_off(void) -{ - board_led_write(false); -} - -// TODO remove -static inline void board_delay(uint32_t ms) -{ - uint32_t start_ms = board_millis(); - while (board_millis() - start_ms < ms) - { - #if CFG_TUD_ENABLED - // take chance to run usb background - tud_task(); - #endif - } -} - -// stdio getchar() is blocking, this is non-blocking version -int board_getchar(void); - -#ifdef __cplusplus - } -#endif - -#endif /* _BSP_BOARD_H_ */ - -/** @} */ diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h new file mode 100644 index 000000000..32b10d06b --- /dev/null +++ b/hw/bsp/board_api.h @@ -0,0 +1,137 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BSP_BOARD_H_ +#define _BSP_BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#include +#include + +#include "tusb.h" + +// Define the default baudrate +#ifndef CFG_BOARD_UART_BAUDRATE +#define CFG_BOARD_UART_BAUDRATE 115200 ///< Default baud rate +#endif + +//--------------------------------------------------------------------+ +// Board Porting API +// For simplicity, only one LED and one Button are used +//--------------------------------------------------------------------+ + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void); + +// Turn LED on or off +void board_led_write(bool state); + +// Control led pattern using phase duration in ms. +// For each phase, LED is toggle then repeated, board_led_task() is required to be called +//void board_led_pattern(uint32_t const phase_ms[], uint8_t count); + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void); + +// Get characters from UART +// Return number of read bytes +int board_uart_read(uint8_t* buf, int len); + +// Send characters to UART +// Return number of sent bytes +int board_uart_write(void const * buf, int len); + +#if CFG_TUSB_OS == OPT_OS_NONE + // Get current milliseconds, must be implemented when no RTOS is used + uint32_t board_millis(void); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + static inline uint32_t board_millis(void) + { + return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); + } + +#elif CFG_TUSB_OS == OPT_OS_MYNEWT + static inline uint32_t board_millis(void) + { + return os_time_ticks_to_ms32( os_time_get() ); + } + +#elif CFG_TUSB_OS == OPT_OS_PICO + #include "pico/time.h" + static inline uint32_t board_millis(void) + { + return to_ms_since_boot(get_absolute_time()); + } + +#elif CFG_TUSB_OS == OPT_OS_RTTHREAD + static inline uint32_t board_millis(void) + { + return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); + } + +#else + #error "board_millis() is not implemented for this OS" +#endif + +//--------------------------------------------------------------------+ +// Helper functions +//--------------------------------------------------------------------+ +static inline void board_led_on(void) +{ + board_led_write(true); +} + +static inline void board_led_off(void) +{ + board_led_write(false); +} + +// TODO remove +static inline void board_delay(uint32_t ms) +{ + uint32_t start_ms = board_millis(); + while (board_millis() - start_ms < ms) + { + #if CFG_TUD_ENABLED + // take chance to run usb background + tud_task(); + #endif + } +} + +// stdio getchar() is blocking, this is non-blocking version +int board_getchar(void); + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index 68bcaa123..06975b8cc 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "../board.h" +#include "../board_api.h" #include "pca9532.h" #define UART_DEV LPC_USART0 diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c index e079e7c5b..d155b743d 100644 --- a/hw/bsp/fomu/fomu.c +++ b/hw/bsp/fomu/fomu.c @@ -26,7 +26,7 @@ #include #include -#include "../board.h" +#include "../board_api.h" #include "csr.h" #include "irq.h" diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 113c4c304..27d7e87bb 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -28,7 +28,7 @@ #include "drv_usb_hw.h" #include "drv_usb_dev.h" -#include "../board.h" +#include "../board_api.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index d61f775c7..a767d5f29 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "../board.h" +#include "../board_api.h" #define LED_PORT 1 #define LED_PIN 12 diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 40e3f11cd..be5e9f753 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -32,7 +32,7 @@ #include "hardware/structs/ioqspi.h" #include "hardware/structs/sio.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB diff --git a/hw/bsp/sltb009a/sltb009a.c b/hw/bsp/sltb009a/sltb009a.c index 2a5d112a8..23ef6d7cd 100644 --- a/hw/bsp/sltb009a/sltb009a.c +++ b/hw/bsp/sltb009a/sltb009a.c @@ -25,7 +25,7 @@ * This file is part of the TinyUSB stack. */ -#include "../board.h" +#include "../board_api.h" #include "em_device.h" diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index d661613af..0b2c22d19 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -27,7 +27,7 @@ */ #include "stm32l4xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ -- cgit v1.3.1 From 551e47a464f55e1e36e2812e79902f4ef2955a17 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 Dec 2023 22:50:01 +0700 Subject: allow rp2040 to use max3421e as host controller - fix warnings build hcd max3421 with rp2040 - add tinyusb_host_max3421 target for rp2040 cmake, -DMAX3421_HOST=1 will enable this - add max3421 driver implementation for rp2040 family - update tusb_config for host to allow easy enable host selection for rp2040 (default/pio-usb/max3421) --- .idea/cmake.xml | 15 +-- examples/host/bare_api/src/tusb_config.h | 64 +++++----- examples/host/cdc_msc_hid/src/tusb_config.h | 64 +++++----- .../host/cdc_msc_hid_freertos/src/tusb_config.h | 64 +++++----- examples/host/hid_controller/src/tusb_config.h | 64 +++++----- examples/host/msc_file_explorer/src/tusb_config.h | 65 +++++----- hw/bsp/rp2040/board.h | 11 ++ hw/bsp/rp2040/family.c | 140 +++++++++++++++------ hw/bsp/rp2040/family.cmake | 22 +++- src/portable/analog/max3421/hcd_max3421.c | 36 +++--- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 2 +- 11 files changed, 341 insertions(+), 206 deletions(-) (limited to 'examples/host/hid_controller/src') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index d12e44789..d3917c1f7 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,16 +2,17 @@ - - - + + + + - + @@ -25,7 +26,7 @@ - + @@ -39,10 +40,10 @@ - - + + diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index ede9618d3..05ffbdf75 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index a53000a11..61abb85eb 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 - // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 - #define CFG_TUH_RPI_PIO_USB 0 - #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index ba23301ed..c661f47be 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 - // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 - #define CFG_TUH_RPI_PIO_USB 0 - #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -72,12 +52,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -90,11 +64,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index d37fc02d2..8ddaddda7 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - - #if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index b4ccd8223..1703761a4 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -30,29 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 - // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 - #define CFG_TUH_RPI_PIO_USB 0 - #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -68,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -86,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index 063c9580e..3849894ce 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -74,6 +74,17 @@ #define PICO_DEFAULT_PIO_USB_VBUSEN_STATE 1 #endif +//-------------------------------------------------------------------- +// USB Host MAX3421E +//-------------------------------------------------------------------- + +#define MAX3421_SPI PICO_DEFAULT_SPI_INSTANCE +#define MAX3421_SCK_PIN PICO_DEFAULT_SPI_SCK_PIN +#define MAX3421_MOSI_PIN PICO_DEFAULT_SPI_TX_PIN +#define MAX3421_MISO_PIN PICO_DEFAULT_SPI_RX_PIN +#define MAX3421_CS_PIN 10 +#define MAX3421_INTR_PIN 9 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 5ac104688..cffb632f3 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -37,10 +37,19 @@ #include "bsp/board_api.h" #include "board.h" +#ifdef UART_DEV +static uart_inst_t *uart_inst; +#endif + #if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB #include "pio_usb.h" #endif +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +#include "hardware/spi.h" +static void max3421_init(void); +#endif + #ifdef BUTTON_BOOTSEL // This example blinks the Picoboard LED when the BOOTSEL button is pressed. // @@ -53,73 +62,66 @@ // This doesn't work if others are trying to access flash at the same time, // e.g. XIP streamer, or the other core. bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { - const uint CS_PIN_INDEX = 1; + const uint CS_PIN_INDEX = 1; - // Must disable interrupts, as interrupt handlers may be in flash, and we - // are about to temporarily disable flash access! - uint32_t flags = save_and_disable_interrupts(); + // Must disable interrupts, as interrupt handlers may be in flash, and we + // are about to temporarily disable flash access! + uint32_t flags = save_and_disable_interrupts(); - // Set chip select to Hi-Z - hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, - GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, - IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); + // Set chip select to Hi-Z + hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, + GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, + IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); - // Note we can't call into any sleep functions in flash right now - for (volatile int i = 0; i < 1000; ++i); + // Note we can't call into any sleep functions in flash right now + for (volatile int i = 0; i < 1000; ++i); - // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. - // Note the button pulls the pin *low* when pressed. - bool button_state = (sio_hw->gpio_hi_in & (1u << CS_PIN_INDEX)); + // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. + // Note the button pulls the pin *low* when pressed. + bool button_state = (sio_hw->gpio_hi_in & (1u << CS_PIN_INDEX)); - // Need to restore the state of chip select, else we are going to have a - // bad time when we return to code in flash! - hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, - GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, - IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); + // Need to restore the state of chip select, else we are going to have a + // bad time when we return to code in flash! + hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, + GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, + IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); - restore_interrupts(flags); + restore_interrupts(flags); - return button_state; + return button_state; } #endif //------------- Segger RTT retarget -------------// #if defined(LOGGER_RTT) - // Logging with RTT // - If RTT Control Block is not found by 'Auto Detection` try to use 'Search Range` with '0x20000000 0x10000' // - SWD speed is rather slow around 1000Khz - #include "pico/stdio/driver.h" #include "SEGGER_RTT.h" -static void stdio_rtt_write (const char *buf, int length) -{ +static void stdio_rtt_write (const char *buf, int length) { SEGGER_RTT_Write(0, buf, (unsigned) length); } -static int stdio_rtt_read (char *buf, int len) -{ +static int stdio_rtt_read (char *buf, int len) { return (int) SEGGER_RTT_Read(0, buf, (unsigned) len); } -static stdio_driver_t stdio_rtt = -{ +static stdio_driver_t stdio_rtt = { .out_chars = stdio_rtt_write, .out_flush = NULL, .in_chars = stdio_rtt_read }; -void stdio_rtt_init(void) -{ +void stdio_rtt_init(void) { stdio_set_driver_enabled(&stdio_rtt, true); } - #endif -#ifdef UART_DEV -static uart_inst_t *uart_inst; -#endif +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ void board_init(void) { @@ -165,7 +167,9 @@ void board_init(void) #endif #if CFG_TUH_ENABLED - // set portfunc to host !!! + #if CFG_TUH_MAX3421 + max3421_init(); + #endif #endif #if !CFG_TUD_ENABLED && !CFG_TUH_ENABLED @@ -242,3 +246,69 @@ int board_getchar(void) { // rp2040 implementation will install appropriate handler when initializing // tinyusb. There is no need to forward IRQ from application //--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// API: SPI transfer with MAX3421E, must be implemented by application +//--------------------------------------------------------------------+ +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 + +void max3421_int_handler(uint gpio, uint32_t event_mask) { + if (!(gpio == MAX3421_INTR_PIN && event_mask & GPIO_IRQ_EDGE_FALL)) return; + tuh_int_handler(BOARD_TUH_RHPORT, true); +} + +static void max3421_init(void) { + // CS pin + gpio_init(MAX3421_CS_PIN); + gpio_set_dir(MAX3421_CS_PIN, GPIO_OUT); + gpio_put(MAX3421_CS_PIN, true); + + // Interrupt pin + gpio_init(MAX3421_INTR_PIN); + gpio_set_dir(MAX3421_INTR_PIN, GPIO_IN); + gpio_pull_up(MAX3421_INTR_PIN); + gpio_set_irq_enabled_with_callback(MAX3421_INTR_PIN, GPIO_IRQ_EDGE_FALL, true, max3421_int_handler); + + // SPI init + spi_init(MAX3421_SPI, 4*1000000ul); + gpio_set_function(MAX3421_SCK_PIN, GPIO_FUNC_SPI); + gpio_set_function(MAX3421_MOSI_PIN, GPIO_FUNC_SPI); + gpio_set_function(MAX3421_MISO_PIN, GPIO_FUNC_SPI); + spi_set_format(MAX3421_SPI, 8, SPI_CPOL_0, SPI_CPHA_0, SPI_MSB_FIRST); +} + +//// API to enable/disable MAX3421 INTR pin interrupt +void tuh_max3421_int_api(uint8_t rhport, bool enabled) { + (void) rhport; + irq_set_enabled(IO_IRQ_BANK0, enabled); +} + +// API to control MAX3421 SPI CS +void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) { + (void) rhport; + gpio_put(MAX3421_CS_PIN, !active); +} + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes) { + (void) rhport; + + if (tx_buf == NULL && rx_buf == NULL) { + return false; + } + + int ret; + + if (tx_buf == NULL) { + ret = spi_read_blocking(MAX3421_SPI, 0, rx_buf, xfer_bytes); + }else if (rx_buf == NULL) { + ret = spi_write_blocking(MAX3421_SPI, tx_buf, xfer_bytes); + }else { + ret = spi_write_read_blocking(spi0, tx_buf, rx_buf, xfer_bytes); + } + + return ret == (int) xfer_bytes; +} + +#endif diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 77d8029d9..ec40806fd 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -103,6 +103,20 @@ target_compile_definitions(tinyusb_host_base INTERFACE RP2040_USB_HOST_MODE=1 ) +#------------------------------------ +# Host MAX3421 +#------------------------------------ +add_library(tinyusb_host_max3421 INTERFACE) +target_sources(tinyusb_host_max3421 INTERFACE + ${TOP}/src/portable/analog/max3421/hcd_max3421.c + ) +target_compile_definitions(tinyusb_host_max3421 INTERFACE + CFG_TUH_MAX3421=1 + ) +target_link_libraries(tinyusb_host_max3421 INTERFACE + hardware_spi + ) + #------------------------------------ # BSP & Additions #------------------------------------ @@ -126,7 +140,7 @@ target_compile_definitions(tinyusb_additions INTERFACE if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt") target_compile_definitions(tinyusb_additions INTERFACE LOGGER_RTT - SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + #SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL ) target_sources(tinyusb_additions INTERFACE @@ -186,6 +200,7 @@ function(family_add_pico_pio_usb TARGET) target_link_libraries(${TARGET} PUBLIC tinyusb_pico_pio_usb) endfunction() + # since Pico-PIO_USB compiler support may lag, and change from version to version, add a function that pico-sdk/pico-examples # can check (if present) in case the user has updated their TinyUSB function(is_compiler_supported_by_pico_pio_usb OUTVAR) @@ -209,6 +224,11 @@ function(family_configure_host_example TARGET RTOS) family_add_pico_pio_usb(${PROJECT}) endif() endif() + + # for max3421 host + if (MAX3421_HOST STREQUAL "1") + target_link_libraries(${TARGET} PUBLIC tinyusb_host_max3421) + endif() endfunction() diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 051b7eaa8..cc4799dd6 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -171,6 +171,8 @@ enum { //--------------------------------------------------------------------+ typedef struct { + uint8_t daddr; + struct TU_ATTR_PACKED { uint8_t ep_dir : 1; uint8_t is_iso : 1; @@ -179,17 +181,19 @@ typedef struct { uint8_t xfer_pending : 1; uint8_t xfer_complete : 1; }; + struct TU_ATTR_PACKED { - uint8_t daddr : 4; uint8_t ep_num : 4; + uint16_t packet_size : 12; }; - uint16_t packet_size; uint16_t total_len; uint16_t xferred_len; uint8_t* buf; } max3421_ep_t; +TU_VERIFY_STATIC(sizeof(max3421_ep_t) == 12, "size is not correct"); + typedef struct { // cached register uint8_t sndbc; @@ -320,7 +324,7 @@ static void fifo_read(uint8_t rhport, uint8_t * buffer, uint16_t len, bool in_is static inline void hirq_write(uint8_t rhport, uint8_t data, bool in_isr) { reg_write(rhport, HIRQ_ADDR, data, in_isr); // HIRQ write 1 is clear - _hcd_data.hirq &= ~data; + _hcd_data.hirq &= (uint8_t) ~data; } static inline void hien_write(uint8_t rhport, uint8_t data, bool in_isr) { @@ -390,7 +394,7 @@ static void free_ep(uint8_t daddr) { } static max3421_ep_t * find_next_pending_ep(max3421_ep_t * cur_ep) { - size_t const idx = cur_ep - _hcd_data.ep; + size_t const idx = (size_t) (cur_ep - _hcd_data.ep); // starting from next endpoint for (size_t i = idx + 1; i < CFG_TUH_MAX3421_ENDPOINT_TOTAL; i++) { @@ -537,8 +541,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e (void) rhport; (void) daddr; - uint8_t ep_num = tu_edpt_number(ep_desc->bEndpointAddress); - uint8_t ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); + uint8_t const ep_num = tu_edpt_number(ep_desc->bEndpointAddress); + tusb_dir_t const ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); max3421_ep_t * ep; if (daddr == 0 && ep_num == 0) { @@ -547,15 +551,15 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e ep = allocate_ep(); TU_ASSERT(ep); ep->daddr = daddr; - ep->ep_num = ep_num; - ep->ep_dir = ep_dir; + ep->ep_num = (uint8_t) (ep_num & 0x0f); + ep->ep_dir = (ep_dir == TUSB_DIR_IN) ? 1 : 0; } if ( TUSB_XFER_ISOCHRONOUS == ep_desc->bmAttributes.xfer ) { ep->is_iso = 1; } - ep->packet_size = tu_edpt_packet_size(ep_desc); + ep->packet_size = (uint16_t) (tu_edpt_packet_size(ep_desc) & 0x7ff); return true; } @@ -577,7 +581,7 @@ void xact_out(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { } sndbc_write(rhport, xact_len, in_isr); - uint8_t hxfr = ep->ep_num | HXFR_OUT_NIN | (ep->is_iso ? HXFR_ISO : 0); + uint8_t const hxfr = (uint8_t ) (ep->ep_num | HXFR_OUT_NIN | (ep->is_iso ? HXFR_ISO : 0)); hxfr_write(rhport, hxfr, in_isr); } @@ -590,7 +594,7 @@ void xact_in(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { reg_write(rhport, HCTL_ADDR, hctl, in_isr); } - uint8_t hxfr = ep->ep_num | (ep->is_iso ? HXFR_ISO : 0); + uint8_t const hxfr = (uint8_t) (ep->ep_num | (ep->is_iso ? HXFR_ISO : 0)); hxfr_write(rhport, hxfr, in_isr); } @@ -623,13 +627,13 @@ TU_ATTR_ALWAYS_INLINE static inline void xact_inout(uint8_t rhport, max3421_ep_t // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { uint8_t const ep_num = tu_edpt_number(ep_addr); - uint8_t const ep_dir = tu_edpt_dir(ep_addr); + uint8_t const ep_dir = (uint8_t) tu_edpt_dir(ep_addr); max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir); TU_VERIFY(ep); // control transfer can switch direction - ep->ep_dir = ep_dir; + ep->ep_dir = ep_dir ? 1u : 0u; ep->buf = buffer; ep->total_len = buflen; @@ -748,9 +752,9 @@ static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t re // save data toggle if (ep->ep_dir) { - ep->data_toggle = (hrsl & HRSL_RCVTOGRD) ? 1 : 0; + ep->data_toggle = (hrsl & HRSL_RCVTOGRD) ? 1u : 0u; }else { - ep->data_toggle = (hrsl & HRSL_SNDTOGRD) ? 1 : 0; + ep->data_toggle = (hrsl & HRSL_SNDTOGRD) ? 1u : 0u; } ep->xfer_pending = 0; @@ -929,7 +933,7 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { } // clear all interrupt except SNDBAV_IRQ (never clear by us). Note RCVDAV_IRQ, HXFRDN_IRQ already clear while processing - hirq &= ~HIRQ_SNDBAV_IRQ; + hirq &= (uint8_t) ~HIRQ_SNDBAV_IRQ; if ( hirq ) { hirq_write(rhport, hirq, in_isr); } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 4ed6d36bb..08aef9314 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -27,7 +27,7 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUH_RPI_PIO_USB +#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUH_RPI_PIO_USB && !CFG_TUH_MAX3421 #include "pico.h" #include "rp2040_usb.h" -- cgit v1.3.1 From 9b6f13716f34d6a82a60c8c6ec7969d420a8af28 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 4 Mar 2024 16:08:35 +0700 Subject: correct rp2040 host with max3421 --- examples/host/bare_api/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- examples/host/hid_controller/src/tusb_config.h | 2 +- examples/host/msc_file_explorer/src/tusb_config.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'examples/host/hid_controller/src') diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index 05ffbdf75..432446e94 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 76d59c316..a59a0ffb9 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index bb7c3388d..35de5ee50 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -76,7 +76,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index 8ddaddda7..3ac591d8f 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index 1703761a4..c798b4383 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) -- cgit v1.3.1