From c8e533e61222aa3ccdda291709abd6215e685d95 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 14:54:35 +0700 Subject: fix build with nrfx v3, though max3421e spi does not seem to work well. --- examples/host/cdc_msc_hid/src/cdc_app.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index e275e7943..4a13f8b27 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -72,7 +72,7 @@ void tuh_cdc_rx_cb(uint8_t idx) { uint32_t count = tuh_cdc_read(idx, buf, bufsize); buf[count] = 0; - printf((char*) buf); + printf("%s", (char*) buf); } // Invoked when a device with CDC interface is mounted @@ -89,7 +89,7 @@ void tuh_cdc_mount_cb(uint8_t idx) { // while eneumerating new cdc device cdc_line_coding_t line_coding = {0}; if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { - printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } #else -- cgit v1.3.1 From 62331f02070bdb1bec2890885008e9f88b06bdb6 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 15:55:50 +0700 Subject: fix nrfx v3 spim freq when init fix clang build with nrf --- examples/host/cdc_msc_hid/src/msc_app.c | 4 ++-- hw/bsp/nrf/boards/pca10059/pca10059.ld | 8 +++++++- hw/bsp/nrf/boards/pca10095/board.cmake | 1 - hw/bsp/nrf/boards/pca10100/board.cmake | 1 - hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake | 1 - hw/bsp/nrf/family.c | 6 ++++-- hw/bsp/nrf/family.cmake | 18 +++++++++--------- hw/bsp/nrf/linker/nrf52833_xxaa.ld | 20 ++++++++++++++++++++ hw/bsp/nrf/linker/nrf5340_xxaa_application.ld | 21 +++++++++++++++++++++ src/class/cdc/cdc_host.c | 4 ++-- src/host/usbh.c | 2 +- 11 files changed, 66 insertions(+), 20 deletions(-) create mode 100644 hw/bsp/nrf/linker/nrf52833_xxaa.ld create mode 100644 hw/bsp/nrf/linker/nrf5340_xxaa_application.ld (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index e9c9676b8..1d7e18e6e 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -48,8 +48,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/hw/bsp/nrf/boards/pca10059/pca10059.ld b/hw/bsp/nrf/boards/pca10059/pca10059.ld index 510bfdd8c..adc80f3c4 100644 --- a/hw/bsp/nrf/boards/pca10059/pca10059.ld +++ b/hw/bsp/nrf/boards/pca10059/pca10059.ld @@ -1,7 +1,7 @@ /* Linker script to configure memory regions. */ SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ MEMORY { @@ -11,3 +11,9 @@ MEMORY INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index ca5399a3a..95dd30969 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf5340_application) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) function(update_board TARGET) target_sources(${TARGET} PRIVATE diff --git a/hw/bsp/nrf/boards/pca10100/board.cmake b/hw/bsp/nrf/boards/pca10100/board.cmake index c30026815..a925dae80 100644 --- a/hw/bsp/nrf/boards/pca10100/board.cmake +++ b/hw/bsp/nrf/boards/pca10100/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52833) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52833_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake index 693d7beed..cc370aac8 100644 --- a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52840) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index deae64f05..aff851ddc 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -356,20 +356,22 @@ static void max3421_init(void) { .miso_pin = MAX3421_MISO_PIN, #if NRFX_VER <= 2 .ss_pin = NRFX_SPIM_PIN_NOT_USED, + .frequency = NRF_SPIM_FREQ_4M, #else .ss_pin = NRF_SPIM_PIN_NOT_CONNECTED, + .frequency = 4000000u, #endif .ss_active_high = false, .irq_priority = 3, .orc = 0xFF, // default setting 4 Mhz, Mode 0, MSB first - .frequency = NRF_SPIM_FREQ_4M, .mode = NRF_SPIM_MODE_0, .bit_order = NRF_SPIM_BIT_ORDER_MSB_FIRST, + .miso_pull = NRF_GPIO_PIN_NOPULL, }; // no handler --> blocking - nrfx_spim_init(&_spi, &cfg, NULL, NULL); + TU_ASSERT(NRFX_SUCCESS == nrfx_spim_init(&_spi, &cfg, NULL, NULL), ); // max3421e interrupt pin #if NRFX_VER <= 2 diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 52a6fc196..56ff62bc4 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -30,8 +30,14 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) + if (MCU_VARIANT STREQUAL "nrf5340_application") + set(MCU_VARIANT_XXAA "nrf5340_xxaa_application") + else () + set(MCU_VARIANT_XXAA "${MCU_VARIANT}_xxaa") + endif () + if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) endif () set(LD_FILE_Clang ${LD_FILE_GNU}) @@ -50,19 +56,13 @@ function(add_board_target BOARD_TARGET) ${NRFX_DIR}/soc/nrfx_atomic.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) + string(TOUPPER "${MCU_VARIANT_XXAA}" MCU_VARIANT_XXAA_UPPER) target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS CONFIG_GPIO_AS_PINRESET + ${MCU_VARIANT_XXAA_UPPER} ) - if (MCU_VARIANT STREQUAL "nrf52840") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52840_XXAA) - elseif (MCU_VARIANT STREQUAL "nrf52833") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52833_XXAA) - elseif (MCU_VARIANT STREQUAL "nrf5340_application") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA NRF5340_XXAA_APPLICATION) - endif () - if (TRACE_ETM STREQUAL "1") # ENABLE_TRACE will cause system_nrf5x.c to set up ETM trace target_compile_definitions(${BOARD_TARGET} PUBLIC ENABLE_TRACE) diff --git a/hw/bsp/nrf/linker/nrf52833_xxaa.ld b/hw/bsp/nrf/linker/nrf52833_xxaa.ld new file mode 100644 index 000000000..ae4d0e5b3 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf52833_xxaa.ld @@ -0,0 +1,20 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x20000 + CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x20000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld new file mode 100644 index 000000000..31762d0b2 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld @@ -0,0 +1,21 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x100000 + EXTFLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x8000000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 + RAM1 (rwx) : ORIGIN = 0x20040000, LENGTH = 0x3F000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 5bdd41f1f..133a10f6e 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -1079,7 +1079,7 @@ static uint32_t ftdi_232bm_baud_to_divisor(uint32_t baud) { static bool ftdi_sio_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { uint16_t const divisor = (uint16_t) ftdi_232bm_baud_to_divisor(baudrate); - TU_LOG_DRV("CDC FTDI Set BaudRate = %lu, divisor = 0x%04x\r\n", baudrate, divisor); + TU_LOG_DRV("CDC FTDI Set BaudRate = %" PRIu32 ", divisor = 0x%04x\r\n", baudrate, divisor); p_cdc->user_control_cb = complete_cb; p_cdc->requested_line_coding.bit_rate = baudrate; @@ -1222,7 +1222,7 @@ static bool cp210x_set_line_coding(cdch_interface_t* p_cdc, cdc_line_coding_t co } static bool cp210x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_LOG_DRV("CDC CP210x Set BaudRate = %lu\r\n", baudrate); + TU_LOG_DRV("CDC CP210x Set BaudRate = %" PRIu32 "\r\n", baudrate); uint32_t baud_le = tu_htole32(baudrate); p_cdc->user_control_cb = complete_cb; return cp210x_set_request(p_cdc, CP210X_SET_BAUDRATE, 0, (uint8_t *) &baud_le, 4, diff --git a/src/host/usbh.c b/src/host/usbh.c index f8fddf394..7a47f5056 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -704,7 +704,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t tusb_control_request_t const * request = &_ctrl_xfer.request; if (XFER_RESULT_SUCCESS != result) { - TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); + TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %" PRIu32 "\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); TU_LOG_BUF_USBH(request, 8); // terminate transfer if any stage failed -- cgit v1.3.1 From c097c85dcf8e0ef3ea052c146c5f514101827251 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 16:17:22 +0700 Subject: fix print lu format warnings with clang --- examples/device/audio_test_multi_rate/src/main.c | 2 +- examples/device/cdc_uac2/src/uac2_app.c | 4 ++-- examples/device/uac2_headset/src/main.c | 4 ++-- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 4 ++-- examples/host/cdc_msc_hid_freertos/src/msc_app.c | 4 ++-- examples/host/msc_file_explorer/src/msc_app.c | 6 +++--- src/CMakeLists.txt | 2 +- src/class/cdc/cdc_device.c | 13 ++++++------- src/class/usbtmc/usbtmc_device.c | 2 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 2 +- tools/get_deps.py | 3 ++- 12 files changed, 24 insertions(+), 24 deletions(-) (limited to 'examples/host') diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 3e7f40dac..2ff7f10bd 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -272,7 +272,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * sampFreq = (uint32_t)((audio_control_cur_4_t *)pBuff)->bCur; - TU_LOG2("Clock set current freq: %lu\r\n", sampFreq); + TU_LOG2("Clock set current freq: %" PRIu32 "\r\n", sampFreq); return true; break; diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index 98659ea68..c57d98a1a 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -69,7 +69,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -118,7 +118,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index fbd7ffe22..0ea6e7025 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -157,7 +157,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -206,7 +206,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 14725996d..940840a30 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -420,5 +420,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - printf((char*)temp_buf); + printf("%s", (char*)temp_buf); } diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 6ff513be1..7d246af67 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -117,7 +117,7 @@ void tuh_cdc_rx_cb(uint8_t idx) { uint32_t count = tuh_cdc_read(idx, buf, bufsize); buf[count] = 0; - printf((char *) buf); + printf("%s", (char *) buf); } void tuh_cdc_mount_cb(uint8_t idx) { @@ -131,7 +131,7 @@ void tuh_cdc_mount_cb(uint8_t idx) { // otherwise you need to call tuh_cdc_set_line_coding() first cdc_line_coding_t line_coding = { 0 }; if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { - printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index ee02ba917..9ffd5d965 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -47,8 +47,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_dat uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024 * 1024) / block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024 * 1024) / block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index ecea614a2..f323e30f0 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -114,7 +114,7 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); // printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); // For simplicity: we only mount 1 LUN per device @@ -541,10 +541,10 @@ void cli_cmd_ls(EmbeddedCli *cli, char *args, void *context) printf("%-40s", fno.fname); if (fno.fsize < 1024) { - printf("%lu B\r\n", fno.fsize); + printf("%" PRIu32 " B\r\n", fno.fsize); }else { - printf("%lu KB\r\n", fno.fsize / 1024); + printf("%" PRIu32 " KB\r\n", fno.fsize / 1024); } } } diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 076e1e1eb..272962332 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -41,7 +41,7 @@ function(add_tinyusb TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../lib/networking ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") target_compile_options(${TARGET} PRIVATE -Wall -Wextra diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 7ef0530ec..2e0a0c30d 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -43,10 +43,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ - BULK_PACKET_SIZE = (TUD_OPT_HIGH_SPEED ? 512 : 64) -}; +#define BULK_PACKET_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) typedef struct { @@ -176,9 +173,11 @@ uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); // flush if queue more than packet size - // may need to suppress -Wunreachable-code since most of the time CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE - if ( (tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE) || ((CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE) && tu_fifo_full(&p_cdc->tx_ff)) ) - { + if ( tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE + #if CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE + || tu_fifo_full(&p_cdc->tx_ff) // check full if fifo size is less than packet size + #endif + ) { tud_cdc_n_write_flush(itf); } diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 286cbe108..f6cddfbd7 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -360,7 +360,7 @@ uint16_t usbtmcd_open_cb(uint8_t rhport, tusb_desc_interface_t const * itf_desc, // processing a command (such as a clear). Returns true if it was // in the NAK state and successfully transitioned to the ACK wait // state. -bool tud_usbtmc_start_bus_read() +bool tud_usbtmc_start_bus_read(void) { usbtmcd_state_enum oldState = usbtmc_state.state; switch(oldState) diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 56e7f39a0..2fe721d6b 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -147,7 +147,7 @@ static void start_dma(volatile uint32_t* reg_startep) { static void edpt_dma_start(volatile uint32_t* reg_startep) { if (atomic_flag_test_and_set(&_dcd.dma_running)) { - usbd_defer_func((osal_task_func_t) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); + usbd_defer_func((osal_task_func_t)(uintptr_t ) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); } else { start_dma(reg_startep); } diff --git a/tools/get_deps.py b/tools/get_deps.py index cfa60002a..e08246178 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -177,7 +177,8 @@ deps_optional = { '20285262657d1b482d132d20d755c8c330d55c1f', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x' 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5' - 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb'], + 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb' + 'sam3x samd11 samd21 samd51 same5x same7x saml2x samg'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From db30eee0fcacda2b2f3f208ddf5ab9be723129d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 18:08:41 +0700 Subject: clang tested with mcb1800, add heap to lpc18 linker --- examples/host/msc_file_explorer/src/main.c | 17 +++++------- examples/host/msc_file_explorer/src/msc_app.c | 1 - hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 34 ++++++++++++++++------- hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 37 ++++++++++++++++++-------- hw/bsp/lpc18/family.cmake | 8 +++--- hw/bsp/nrf/family.cmake | 3 +-- src/portable/ehci/ehci.c | 2 +- 7 files changed, 64 insertions(+), 38 deletions(-) (limited to 'examples/host') diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 73f3e9eb5..f6b6810f5 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -72,8 +72,7 @@ extern bool msc_app_init(void); extern void msc_app_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host MassStorage Explorer Example\r\n"); @@ -87,8 +86,7 @@ int main(void) msc_app_init(); - while (1) - { + while (1) { // tinyusb host task tuh_task(); @@ -103,28 +101,25 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { (void) dev_addr; } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { (void) dev_addr; } //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index f323e30f0..ddd39c674 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -95,7 +95,6 @@ void msc_app_task(void) // //--------------------------------------------------------------------+ - bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld index f1a3add8f..8562a6e71 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -311,6 +311,20 @@ SECTIONS PROVIDE(end = .); } > RamLoc40 AT> RamLoc40 /* > RamLoc32 AT> RamLoc32 */ + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamLoc40 */ .noinit_RAM2 (NOLOAD) : ALIGN(4) { @@ -383,15 +397,17 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 837dec364..02ea1088e 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -255,7 +255,6 @@ SECTIONS *(COMMON) . = ALIGN(4) ; _ebss = .; - PROVIDE(end = .); } > RamLoc40 /* RamLoc32 */ /* NOINIT section for RamLoc40 */ @@ -266,6 +265,20 @@ SECTIONS . = ALIGN(4) ; } > RamLoc40 + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) { @@ -298,19 +311,21 @@ SECTIONS . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 78f4c510b..bf8efabba 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -47,9 +47,11 @@ function(add_board_target BOARD_TARGET) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 56ff62bc4..1d6702720 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -39,7 +39,6 @@ function(add_board_target BOARD_TARGET) if (NOT DEFINED LD_FILE_GNU) set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) @@ -89,7 +88,7 @@ function(add_board_target BOARD_TARGET) ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" + "LINKER:--script=${LD_FILE_GNU}" -L${NRFX_DIR}/mdk ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index e145cbb1b..01bbf62bf 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -92,7 +92,7 @@ CFG_TUH_MEM_SECTION TU_ATTR_ALIGNED(4096) static ehci_data_t ehci_data; //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= (EHCI_DBG + 1) +#if 0 && CFG_TUSB_DEBUG >= (EHCI_DBG + 1) static inline void print_portsc(ehci_registers_t* regs) { TU_LOG_HEX(EHCI_DBG, regs->portsc); TU_LOG(EHCI_DBG, " Connect Status : %u\r\n", regs->portsc_bm.current_connect_status); -- cgit v1.3.1 From b67cb26e51c7f31db0cf71c6c1ce5430bbbbb7f5 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 24 Apr 2024 16:17:33 +0700 Subject: change hil board s3 devkitm (devkitc seems to have usb issue with cp2104) --- .github/workflows/build_aarch64.yml | 2 +- .github/workflows/build_cmake.yml | 4 +- .github/workflows/build_esp.yml | 6 +-- .github/workflows/build_renesas.yml | 2 +- .github/workflows/build_riscv.yml | 2 +- examples/build_system/make/make.mk | 60 ++++++++++++------------- examples/build_system/make/toolchain/arm_gcc.mk | 3 ++ examples/build_system/make/toolchain/arm_iar.mk | 2 + examples/device/cdc_msc_freertos/Makefile | 2 +- examples/device/hid_composite_freertos/Makefile | 2 +- examples/host/cdc_msc_hid_freertos/Makefile | 2 +- hw/bsp/board.c | 13 +++--- hw/bsp/board_api.h | 1 + test/hil/hil_pi4.json | 6 +-- 14 files changed, 56 insertions(+), 51 deletions(-) (limited to 'examples/host') diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml index e5dbf9494..237692498 100644 --- a/.github/workflows/build_aarch64.yml +++ b/.github/workflows/build_aarch64.yml @@ -47,7 +47,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 1f74bda70..65de47e8d 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -168,7 +168,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ @@ -216,7 +216,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index d283c6535..4108a58a5 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -34,7 +34,7 @@ jobs: # ESP32-S2 - 'espressif_kaluga_1' # ESP32-S3 - - 'espressif_s3_devkitc' + - 'espressif_s3_devkitm' steps: - name: Setup Python uses: actions/setup-python@v5 @@ -51,7 +51,7 @@ jobs: run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build_esp32.py ${{ matrix.board }} - name: Upload Artifacts for Hardware Testing - if: matrix.board == 'espressif_s3_devkitc' && github.repository_owner == 'hathach' + if: matrix.board == 'espressif_s3_devkitm' && github.repository_owner == 'hathach' uses: actions/upload-artifact@v4 with: name: ${{ matrix.board }} @@ -75,7 +75,7 @@ jobs: fail-fast: false matrix: board: - - 'espressif_s3_devkitc' + - 'espressif_s3_devkitm' steps: - name: Clean workspace run: | diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index ec06c9426..fbc12d285 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -46,7 +46,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml index e891a3a51..7f5031ff1 100644 --- a/.github/workflows/build_riscv.yml +++ b/.github/workflows/build_riscv.yml @@ -48,7 +48,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk index 772befca4..2437b8766 100644 --- a/examples/build_system/make/make.mk +++ b/examples/build_system/make/make.mk @@ -15,6 +15,8 @@ TOP = $(abspath $(subst make.mk,../../..,$(THIS_MAKEFILE))) # Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) +#-------------- Linux/Windows ------------ + # Detect whether shell style is windows or not # https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 ifeq '$(findstring ;,$(PATH))' ';' @@ -26,13 +28,18 @@ CMDEXE := 1 SHELL := cmd.exe endif -# Handy check parameter function -check_defined = \ - $(strip $(foreach 1,$1, \ - $(call __check_defined,$1,$(strip $(value 2))))) -__check_defined = \ - $(if $(value $1),, \ - $(error Undefined make flag: $1$(if $2, ($2)))) +ifeq ($(CMDEXE),1) + CP = copy + RM = del + MKDIR = mkdir + PYTHON = python +else + CP = cp + RM = rm + MKDIR = mkdir + PYTHON = python3 +endif + # Build directory BUILD := _build/$(BOARD) @@ -44,8 +51,8 @@ BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) # Board without family ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) -BOARD_PATH := hw/bsp/$(BOARD) -FAMILY := + BOARD_PATH := hw/bsp/$(BOARD) + FAMILY := endif # Board within family @@ -68,31 +75,12 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif -#-------------- Toolchain ------------ - -# Supported toolchain: gcc, iar +#------------------------------------------------------------- +# Toolchain +# Can be changed via TOOLCHAIN=gcc|iar or CC=arm-none-eabi-gcc|iccarm|clang +#------------------------------------------------------------- TOOLCHAIN ?= gcc -# Can be set by board, default to ARM GCC -CROSS_COMPILE ?= arm-none-eabi- - -ifeq ($(TOOLCHAIN),iar) -CC := iccarm -USE_IAR = 1 -endif - -ifeq ($(CMDEXE),1) - CP = copy - RM = del - MKDIR = mkdir - PYTHON = python -else - CP = cp - RM = rm - MKDIR = mkdir - PYTHON = python3 -endif - #-------------- Source files and compiler flags -------------- # tinyusb makefile include $(TOP)/src/tinyusb.mk @@ -143,3 +131,11 @@ endif # toolchain specific include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk + +# Handy check parameter function +check_defined = \ + $(strip $(foreach 1,$1, \ + $(call __check_defined,$1,$(strip $(value 2))))) +__check_defined = \ + $(if $(value $1),, \ + $(error Undefined make flag: $1$(if $2, ($2)))) diff --git a/examples/build_system/make/toolchain/arm_gcc.mk b/examples/build_system/make/toolchain/arm_gcc.mk index ed5ddc970..c34581ae2 100644 --- a/examples/build_system/make/toolchain/arm_gcc.mk +++ b/examples/build_system/make/toolchain/arm_gcc.mk @@ -1,5 +1,8 @@ # makefile for arm gcc toolchain +# Can be set by family, default to ARM GCC +CROSS_COMPILE ?= arm-none-eabi- + CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ AS = $(CC) -x assembler-with-cpp diff --git a/examples/build_system/make/toolchain/arm_iar.mk b/examples/build_system/make/toolchain/arm_iar.mk index 04c9f22b3..17967b41a 100644 --- a/examples/build_system/make/toolchain/arm_iar.mk +++ b/examples/build_system/make/toolchain/arm_iar.mk @@ -1,4 +1,6 @@ # makefile for arm iar toolchain + +CC = iccarm AS = iasmarm LD = ilinkarm OBJCOPY = ielftool --silent diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 13f336f99..fe3fb6482 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,7 +1,7 @@ include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index add9e9814..88d602393 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -3,7 +3,7 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index 5351a6248..bf4725f47 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -1,7 +1,7 @@ include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 996ac9263..cdef5e1e5 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -25,6 +25,14 @@ #include "board_api.h" +//--------------------------------------------------------------------+ +// Board API +//--------------------------------------------------------------------+ +int board_getchar(void) { + char c; + return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); +} + //--------------------------------------------------------------------+ // newlib read()/write() retarget //--------------------------------------------------------------------+ @@ -126,8 +134,3 @@ FILE *const stdin = &__stdio; __strong_reference(stdin, stdout); __strong_reference(stdin, stderr); #endif - -int board_getchar(void) { - char c; - return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); -} diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 418ce3551..f21a32371 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -142,6 +142,7 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars uint8_t uid[16] TU_ATTR_ALIGNED(4); size_t uid_len; + // TODO work with make, but not working with esp32s3 cmake if ( board_get_unique_id ) { uid_len = board_get_unique_id(uid, sizeof(uid)); }else { diff --git a/test/hil/hil_pi4.json b/test/hil/hil_pi4.json index 17d9ff1fa..8aff81910 100644 --- a/test/hil/hil_pi4.json +++ b/test/hil/hil_pi4.json @@ -8,13 +8,13 @@ "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" }, { - "name": "espressif_s3_devkitc", - "uid": "7CDFA1E073CC", + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", "tests": [ "cdc_msc_freertos", "hid_composite_freertos" ], "flasher": "esptool", - "flasher_sn": "461cb8d7decdeb119be9b506e93fd3f1", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", "flasher_args": "-b 1500000" }, { -- cgit v1.3.1 From 1e7091dae98ea3eeba4789364c290199b157c368 Mon Sep 17 00:00:00 2001 From: tyustli <43946994+tyustli@users.noreply.github.com> Date: Thu, 25 Apr 2024 19:47:12 +0800 Subject: fix ci error --- examples/host/bare_api/src/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'examples/host') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 14725996d..b1d388bf9 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -34,6 +34,7 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "class/hid/hid.h" // English #define LANGUAGE_ID 0x0409 -- cgit v1.3.1 From 2e995d7cf4b2971e3ca7167a097b99832c8d61ce Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Apr 2024 20:23:40 +0700 Subject: adding support for esp32 for use with max3421e host --- examples/device/board_test/src/tusb_config.h | 2 +- examples/device/cdc_msc_freertos/src/main.c | 6 +-- examples/device/cdc_msc_freertos/src/tusb_config.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 6 +-- .../hid_composite_freertos/src/tusb_config.h | 2 +- examples/device/video_capture/src/main.c | 4 +- examples/device/video_capture/src/tusb_config.h | 2 +- examples/device/video_capture_2ch/src/main.c | 4 +- .../device/video_capture_2ch/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 6 +-- .../host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- hw/bsp/board_api.h | 2 +- .../boards/adafruit_feather_esp32_v2/board.cmake | 2 + .../boards/adafruit_feather_esp32_v2/board.h | 53 ++++++++++++++++++++++ hw/bsp/espressif/boards/family.c | 19 ++++---- .../components/tinyusb_src/CMakeLists.txt | 12 +---- hw/bsp/espressif/family.cmake | 6 +-- src/common/tusb_mcu.h | 5 +- src/portable/analog/max3421/hcd_max3421.c | 2 +- src/tusb_option.h | 2 + 21 files changed, 94 insertions(+), 49 deletions(-) create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h (limited to 'examples/host') diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 1a27cc87f..36eafe807 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -49,7 +49,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index e94e8eaec..607d40270 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -111,14 +111,14 @@ int main(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 91efe7d40..e743c9148 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ff2cb635e..2bd545bc2 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -113,14 +113,14 @@ int main(void) xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 3ba9bf311..0689e0f23 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 2a2b0961f..ddb51e03a 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -288,7 +288,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -344,7 +344,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index bdfc37d87..21483a2da 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index eb1cf2580..e8c2ec6b0 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -296,7 +296,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -352,7 +352,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index fe66d63b5..43c7dfc90 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 7d246af67..f3495ab28 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 069cbdc90..a6cb4d460 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -107,14 +107,14 @@ int main(void) { xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 35de5ee50..0aab2cd2f 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index f21a32371..eee9ed9c5 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -39,7 +39,7 @@ extern "C" { #include "tusb.h" #if CFG_TUSB_OS == OPT_OS_FREERTOS -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake new file mode 100644 index 000000000..18c956714 --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32") diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h new file mode 100644 index 000000000..0c53df06b --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 0 +#define NEOPIXEL_POWER_PIN 2 +#define NEOPIXEL_POWER_STATE 1 + +#define BUTTON_PIN 38 +#define BUTTON_STATE_ACTIVE 0 + +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI3_HOST +#define MAX3421_SCK_PIN 5 +#define MAX3421_MOSI_PIN 19 +#define MAX3421_MISO_PIN 21 +#define MAX3421_CS_PIN 33 +#define MAX3421_INTR_PIN 15 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 5599d1504..02e478a0c 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -30,8 +30,12 @@ #include "esp_rom_gpio.h" #include "esp_mac.h" #include "hal/gpio_ll.h" + +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) #include "hal/usb_hal.h" #include "soc/usb_periph.h" +static void configure_pins(usb_hal_context_t* usb); +#endif #include "driver/gpio.h" #include "driver/uart.h" @@ -56,7 +60,6 @@ static led_strip_handle_t led_strip; static void max3421_init(void); #endif -static void configure_pins(usb_hal_context_t* usb); //--------------------------------------------------------------------+ // Implementation @@ -100,7 +103,6 @@ void board_init(void) { }; ESP_ERROR_CHECK(led_strip_new_rmt_device(&strip_config, &rmt_config, &led_strip)); - led_strip_clear(led_strip); // off #endif @@ -109,6 +111,7 @@ void board_init(void) { gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) // USB Controller Hal init periph_module_reset(PERIPH_USB_MODULE); periph_module_enable(PERIPH_USB_MODULE); @@ -118,12 +121,14 @@ void board_init(void) { }; usb_hal_init(&hal); configure_pins(&hal); +#endif #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif } +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) static void configure_pins(usb_hal_context_t* usb) { /* usb_periph_iopins currently configures USB_OTG as USB Device. * Introduce additional parameters in usb_hal_context_t when adding support @@ -153,6 +158,7 @@ static void configure_pins(usb_hal_context_t* usb) { gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); } } +#endif //--------------------------------------------------------------------+ // Board porting API @@ -208,15 +214,12 @@ SemaphoreHandle_t max3421_intr_sem; static void IRAM_ATTR max3421_isr_handler(void* arg) { (void) arg; // arg is gpio num - gpio_set_level(13, 1); BaseType_t xHigherPriorityTaskWoken = pdFALSE; xSemaphoreGiveFromISR(max3421_intr_sem, &xHigherPriorityTaskWoken); if (xHigherPriorityTaskWoken) { portYIELD_FROM_ISR(); } - - gpio_set_level(13, 0); } static void max3421_intr_task(void* param) { @@ -250,16 +253,12 @@ static void max3421_init(void) { spi_device_interface_config_t max3421_cfg = { .mode = 0, - .clock_speed_hz = 26000000, + .clock_speed_hz = 20000000, // S2/S3 can work with 26 Mhz, but esp32 seems only work up to 20 Mhz .spics_io_num = -1, // manual control CS .queue_size = 1 }; ESP_ERROR_CHECK(spi_bus_add_device(MAX3421_SPI_HOST, &max3421_cfg, &max3421_spi)); - // debug - gpio_set_direction(13, GPIO_MODE_OUTPUT); - gpio_set_level(13, 0); - // Interrupt pin max3421_intr_sem = xSemaphoreCreateBinary(); xTaskCreate(max3421_intr_task, "max3421 intr", 2048, NULL, configMAX_PRIORITIES - 2, NULL); diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index abe276910..8bdb3802e 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -5,17 +5,7 @@ set(includes_public) set(compile_options) set(tusb_src "${CMAKE_CURRENT_SOURCE_DIR}/../../../../../src") -if(target STREQUAL "esp32s3") - set(tusb_mcu "OPT_MCU_ESP32S3") -elseif(target STREQUAL "esp32s2") - set(tusb_mcu "OPT_MCU_ESP32S2") -else() - # CONFIG_TINYUSB dependency has been guaranteed by Kconfig logic, - # So it's not possible that cmake goes here - message(FATAL_ERROR "TinyUSB is not support on ${target}.") - return() -endif() - +string(TOUPPER OPT_MCU_${target} tusb_mcu) list(APPEND compile_definitions CFG_TUSB_MCU=${tusb_mcu} CFG_TUSB_OS=OPT_OS_FREERTOS diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index 92a9bcb04..eb97401c3 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -3,11 +3,7 @@ cmake_minimum_required(VERSION 3.5) # Apply board specific content i.e IDF_TARGET must be set before project.cmake is included include("${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake") -if(IDF_TARGET STREQUAL "esp32s2") - set(FAMILY_MCUS ESP32S2) -elseif(IDF_TARGET STREQUAL "esp32s3") - set(FAMILY_MCUS ESP32S3) -endif() +string(TOUPPER ${IDF_TARGET} FAMILY_MCUS) # Add example src and bsp directories set(EXTRA_COMPONENT_DIRS "src" "${CMAKE_CURRENT_LIST_DIR}/boards" "${CMAKE_CURRENT_LIST_DIR}/components") diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0ae2573cd..2c4d7461d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -329,6 +329,9 @@ #define TUP_USBIP_DWC2 #define TUP_DCD_ENDPOINT_MAX 6 +#elif TU_CHECK_MCU(OPT_MCU_ESP32) && (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) + #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" + //--------------------------------------------------------------------+ // Dialog //--------------------------------------------------------------------+ @@ -426,7 +429,7 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#ifndef TUP_DCD_ENDPOINT_MAX +#if CFG_TUD_ENABLED && !defined(TUP_DCD_ENDPOINT_MAX) #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 39afb7505..053169bf2 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -484,8 +484,8 @@ bool hcd_init(uint8_t rhport) { // v1 is 0x01, v2 is 0x12, v3 is 0x13 uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); - TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); TU_LOG2_HEX(revision); + TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); // reset reg_write(rhport, USBCTL_ADDR, USBCTL_CHIPRES, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index cbcb69edd..25412d432 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -119,6 +119,8 @@ // Espressif #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 +#define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog #define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x -- cgit v1.3.1 From 223ce56625474764dc00229c44731858abcf4f29 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 26 Apr 2024 00:10:57 +0700 Subject: - add esp32 c3, c6 mcu option - skip breakpoint for espressif riscv --- examples/host/cdc_msc_hid_freertos/src/main.c | 5 ++++- src/common/tusb_mcu.h | 4 ++-- src/common/tusb_verify.h | 2 +- src/portable/analog/max3421/hcd_max3421.c | 2 ++ src/tusb_option.h | 2 ++ 5 files changed, 11 insertions(+), 4 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index a6cb4d460..fa799aede 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -126,7 +126,10 @@ static void usb_host_task(void *param) { (void) param; // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + if (!tuh_init(BOARD_TUH_RHPORT)) { + printf("Failed to init USB Host Stack\r\n"); + vTaskSuspend(NULL); + } if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 00526bdba..5a567f2d5 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -429,8 +429,8 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#if !defined(TUP_DCD_ENDPOINT_MAX) - #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" +#if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED +#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 71406dacf..0a9549c99 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -84,7 +84,7 @@ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -#elif defined(__riscv) +#elif defined(__riscv) && !TUP_MCU_ESPRESSIF #define TU_BREAKPOINT() do { __asm("ebreak\n"); } while(0) #elif defined(_mips) diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 053169bf2..4dc93d2d8 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -479,6 +479,8 @@ bool hcd_init(uint8_t rhport) { _hcd_data.spi_mutex = osal_mutex_create(&_hcd_data.spi_mutexdef); #endif + // NOTE: driver does not seem to work without nRST pin signal + // full duplex, interrupt negative edge reg_write(rhport, PINCTL_ADDR, _tuh_cfg.pinctl | PINCTL_FDUPSPI, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index 25412d432..3ead20ee7 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -120,6 +120,8 @@ #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 #define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define OPT_MCU_ESP32C3 903 ///< Espressif ESP32-C3 +#define OPT_MCU_ESP32C6 904 ///< Espressif ESP32-C6 #define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog -- cgit v1.3.1 From 3e2ea7750681b27238043c7158ff5508f01914a3 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Fri, 10 May 2024 18:55:43 +0700 Subject: More ci tweak (#2636) * change concurrency group to ${{ github.workflow }}-${{ github.ref }} * use argparse for build.py hil_test.py, remove the need to install click * move ci win/mac to build_cmake.yml * rename build_family.yml to build_util.yml * build_util.yml support esp32 * integrate build-espressif into build.yml * build.py support make with --board option * add get_deps action * update hil test to reuse action --- .github/actions/get_deps/action.yml | 29 +++++++ .github/actions/prepare_build/action.yml | 30 ------- .github/actions/setup_toolchain/action.yml | 18 ++++- .github/workflows/build_cmake.yml | 46 +++++++++-- .github/workflows/build_esp.yml | 109 ------------------------- .github/workflows/build_family.yml | 64 --------------- .github/workflows/build_iar.yml | 2 +- .github/workflows/build_renesas.yml | 3 +- .github/workflows/build_util.yml | 59 ++++++++++++++ .github/workflows/build_win_mac.yml | 56 ------------- .github/workflows/ci_set_matrix.py | 2 +- .github/workflows/hil_test.yml | 121 ++++++++++++++++++++-------- .github/workflows/pre-commit.yml | 3 +- examples/device/net_lwip_webserver/skip.txt | 4 +- examples/device/video_capture_2ch/skip.txt | 2 + examples/host/cdc_msc_hid_freertos/only.txt | 1 - hw/bsp/lpc17/family.mk | 2 +- hw/bsp/lpc40/family.mk | 2 + src/class/net/ncm_device.c | 16 ++-- test/hil/hil_test.py | 19 +++-- test/hil/pi4.json | 10 +++ test/hil/pi4_esp32.json | 14 ---- tools/build.py | 46 +++++++---- tools/build_esp32.py | 106 ------------------------ tools/get_deps.py | 11 ++- 25 files changed, 314 insertions(+), 461 deletions(-) create mode 100644 .github/actions/get_deps/action.yml delete mode 100644 .github/actions/prepare_build/action.yml delete mode 100644 .github/workflows/build_esp.yml delete mode 100644 .github/workflows/build_family.yml create mode 100644 .github/workflows/build_util.yml delete mode 100644 .github/workflows/build_win_mac.yml delete mode 100644 test/hil/pi4_esp32.json delete mode 100644 tools/build_esp32.py (limited to 'examples/host') diff --git a/.github/actions/get_deps/action.yml b/.github/actions/get_deps/action.yml new file mode 100644 index 000000000..38b44a70e --- /dev/null +++ b/.github/actions/get_deps/action.yml @@ -0,0 +1,29 @@ +name: Get dependencies + +inputs: + arg: + required: true + type: string + +runs: + using: "composite" + steps: + - name: Checkout pico-sdk for rp2040 + if: contains(inputs.arg, 'rp2040') || contains(inputs.arg, 'raspberry_pi_pico') + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Linux dependencies + if: runner.os == 'Linux' + run: | + sudo apt install -y ninja-build + shell: bash + + - name: Get Dependencies + run: | + python3 tools/get_deps.py ${{ inputs.arg }} + echo "PICO_SDK_PATH=${{ github.workspace }}/pico-sdk" >> $GITHUB_ENV + shell: bash diff --git a/.github/actions/prepare_build/action.yml b/.github/actions/prepare_build/action.yml deleted file mode 100644 index 5f2c544c1..000000000 --- a/.github/actions/prepare_build/action.yml +++ /dev/null @@ -1,30 +0,0 @@ -name: Prepare to build - -inputs: - family: - required: true - type: string - -runs: - using: "composite" - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout pico-sdk for rp2040 - if: contains(inputs.family, 'rp2040') - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - pip install click - python3 tools/get_deps.py ${{ inputs.family }} - echo >> $GITHUB_ENV "PICO_SDK_PATH=$GITHUB_WORKSPACE/pico-sdk" - shell: bash diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index b59ece116..e6c79e7dd 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -8,6 +8,11 @@ inputs: required: false type: string +outputs: + build_option: + description: 'Build option for the toolchain e.g --toolchain clang' + value: ${{ steps.set-toolchain-option.outputs.build_option }} + runs: using: "composite" steps: @@ -19,7 +24,7 @@ runs: - name: Pull ESP-IDF docker if: inputs.toolchain == 'esp-idf' - run: docker pull espressif/idf:latest + run: docker pull espressif/idf:${{ inputs.toolchain_url }} shell: bash - name: Download Toolchain @@ -29,3 +34,14 @@ runs: uses: ./.github/actions/setup_toolchain/download with: toolchain_url: ${{ inputs.toolchain_url }} + + - name: Set toolchain option + id: set-toolchain-option + run: | + BUILD_OPTION="" + if [[ "${{ inputs.toolchain }}" == *"clang"* ]]; then + BUILD_OPTION="--toolchain clang" + fi + echo "build_option=$BUILD_OPTION" + echo "build_option=$BUILD_OPTION" >> $GITHUB_OUTPUT + shell: bash diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index b62a0e9bd..4723cf8d9 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -12,6 +12,7 @@ on: - 'tools/build.py' - '.github/actions/**' - '.github/workflows/build_cmake.yml' + - '.github/workflows/build_util.yml' - '.github/workflows/ci_set_matrix.py' pull_request: branches: [ master ] @@ -24,9 +25,10 @@ on: - 'tools/build.py' - '.github/actions/**' - '.github/workflows/build_cmake.yml' + - '.github/workflows/build_util.yml' - '.github/workflows/ci_set_matrix.py' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: @@ -55,7 +57,7 @@ jobs: # --------------------------------------- cmake: needs: set-matrix - uses: ./.github/workflows/build_family.yml + uses: ./.github/workflows/build_util.yml strategy: fail-fast: false matrix: @@ -69,14 +71,14 @@ jobs: build-system: 'cmake' toolchain: ${{ matrix.toolchain }} toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} - build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} # --------------------------------------- # Build Make # --------------------------------------- make: needs: set-matrix - uses: ./.github/workflows/build_family.yml + uses: ./.github/workflows/build_util.yml strategy: fail-fast: false matrix: @@ -90,4 +92,38 @@ jobs: build-system: 'make' toolchain: ${{ matrix.toolchain }} toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} - build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + + # --------------------------------------- + # Build Make on Windows/MacOS + # --------------------------------------- + make-os: + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + os: [windows-latest, macos-latest] + with: + os: ${{ matrix.os }} + build-system: 'make' + toolchain: 'arm-gcc' + build-args: '["-bstm32f411disco"]' + + # --------------------------------------- + # Build Espressif + # --------------------------------------- + espressif: + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + board: + # ESP32-S2 + - 'espressif_kaluga_1' + # ESP32-S3 skip since devkitm is also compiled in hil-test workflow + #- 'espressif_s3_devkitm' + with: + build-system: 'cmake' + toolchain: 'esp-idf' + toolchain_url: 'v5.1.1' + build-args: '["-b${{ matrix.board }}"]' diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml deleted file mode 100644 index 66fa8548e..000000000 --- a/.github/workflows/build_esp.yml +++ /dev/null @@ -1,109 +0,0 @@ -name: Build ESP - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - '.github/workflows/build_esp.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - '.github/workflows/build_esp.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - build-esp: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - board: - # ESP32-S2 - - 'espressif_kaluga_1' - # ESP32-S3 - - 'espressif_s3_devkitm' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Setup Toolchain - uses: ./.github/actions/setup_toolchain - with: - toolchain: 'esp-idf' - - - name: Build - run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build.py -b ${{ matrix.board }} - - - name: Upload Artifacts for Hardware Testing - if: matrix.board == 'espressif_s3_devkitm' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: ${{ matrix.board }} - path: | - cmake-build/cmake-build-${{ matrix.board }}/*/*/bootloader/bootloader.bin - cmake-build/cmake-build-${{ matrix.board }}/*/*/*.bin - cmake-build/cmake-build-${{ matrix.board }}/*/*/partition_table/partition-table.bin - cmake-build/cmake-build-${{ matrix.board }}/*/*/config.env - cmake-build/cmake-build-${{ matrix.board }}/*/*/flash_args - - # --------------------------------------- - # Hardware in the loop (HIL) - # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json - # --------------------------------------- - hil-test: - # run only with hathach's commit due to limited resource on RPI4 - if: github.repository_owner == 'hathach' - needs: build-esp - runs-on: [self-hosted, esp32s3, hardware-in-the-loop] - strategy: - fail-fast: false - matrix: - board: - - 'espressif_s3_devkitm' - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - # USB bus on rpi4 is not stable, reset it before testing - - name: Reset USB bus - run: | - lsusb - lsusb -t - # reset VIA Labs 2.0 hub - sudo usbreset 001/002 - - - name: Checkout test/hil - uses: actions/checkout@v4 - with: - sparse-checkout: test/hil - - - name: Download Artifacts - uses: actions/download-artifact@v4 - with: - name: ${{ matrix.board }} - path: cmake-build/cmake-build-${{ matrix.board }} - - - name: Test on actual hardware - run: | - python3 test/hil/hil_test.py --board ${{ matrix.board }} pi4_esp32.json diff --git a/.github/workflows/build_family.yml b/.github/workflows/build_family.yml deleted file mode 100644 index 2e89267a3..000000000 --- a/.github/workflows/build_family.yml +++ /dev/null @@ -1,64 +0,0 @@ -name: Build family - -on: - workflow_call: - inputs: - build-system: - required: true - type: string - toolchain: - required: true - type: string - toolchain_url: - required: true - type: string - build-family: - required: true - type: string - -jobs: - family: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: ${{ fromJSON(inputs.build-family) }} - steps: - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Setup Toolchain - uses: ./.github/actions/setup_toolchain - with: - toolchain: ${{ inputs.toolchain }} - toolchain_url: ${{ inputs.toolchain_url }} - - - name: Checkout pico-sdk for rp2040 - if: contains(matrix.family, 'rp2040') - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - pip install click - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: | - OPTION="" - if [[ "${{ inputs.toolchain }}" == *"clang"* ]]; then - OPTION="--toolchain clang" - fi - echo "OPTION=$OPTION" - python tools/build.py -s ${{ inputs.build-system }} $OPTION ${{ matrix.family }} - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index c4a7f96b7..34dbda192 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -23,7 +23,7 @@ on: - '.github/workflows/build_iar.yml' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index 8c83bdbbf..1be49344f 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -21,7 +21,7 @@ on: - '.github/workflows/build_renesas.yml' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: @@ -65,7 +65,6 @@ jobs: - name: Get Dependencies run: | - pip install click python3 tools/get_deps.py ${{ matrix.family }} - name: Build diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml new file mode 100644 index 000000000..f8ad1900c --- /dev/null +++ b/.github/workflows/build_util.yml @@ -0,0 +1,59 @@ +name: Reusable build util + +on: + workflow_call: + inputs: + build-system: + required: true + type: string + toolchain: + required: true + type: string + toolchain_url: + required: false + type: string + build-args: + required: true + type: string + os: + required: false + type: string + default: 'ubuntu-latest' + +jobs: + family: + runs-on: ${{ inputs.os }} + strategy: + fail-fast: false + matrix: + arg: ${{ fromJSON(inputs.build-args) }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Setup Toolchain + id: setup-toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: ${{ inputs.toolchain }} + toolchain_url: ${{ inputs.toolchain_url }} + + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: ${{ matrix.arg }} + + - name: Build + if: inputs.toolchain != 'esp-idf' + run: | + python tools/build.py -s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ matrix.arg }} + + - name: Build using ESP-IDF docker + if: inputs.toolchain == 'esp-idf' + run: | + docker run --rm -v $PWD:/project -w /project espressif/idf:${{ inputs.toolchain_url }} python3 tools/build.py ${{ matrix.arg }} diff --git a/.github/workflows/build_win_mac.yml b/.github/workflows/build_win_mac.yml deleted file mode 100644 index 35328aa32..000000000 --- a/.github/workflows/build_win_mac.yml +++ /dev/null @@ -1,56 +0,0 @@ -name: Build Windows/MacOS - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_win_mac.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_win_mac.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - # --------------------------------------- - # Build ARM family - # --------------------------------------- - build-arm: - strategy: - fail-fast: false - matrix: - os: [windows-latest, macos-latest] - runs-on: ${{ matrix.os }} - - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '10.3-2021.10' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get Dependencies - run: | - pip install click - python3 tools/get_deps.py stm32f4 - - - name: Build - run: python3 tools/build.py -s make stm32f2 diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 2a17be6a1..ea758d917 100644 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -16,7 +16,7 @@ family_list = { "ch32v307 fomu gd32vf103": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], - "lpc11 lpc13 lpc15": ["arm-gcc"], + "lpc11 lpc13 lpc15": ["arm-gcc", "arm-clang"], "lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], "mcx": ["arm-gcc"], diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 024ab969d..796ff32dc 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -24,15 +24,18 @@ on: - '.github/actions/**' - '.github/workflows/hil_test.yml' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: + # --------------------------------------- + # Build Non Espressif + # --------------------------------------- build: if: github.repository_owner == 'hathach' runs-on: ubuntu-latest outputs: - BOARD_LIST: ${{ steps.parse_hil_json.outputs.BOARD_LIST }} + BOARDS_LIST: ${{ steps.parse_hil_json.outputs.BOARDS_LIST }} steps: - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -42,38 +45,29 @@ jobs: with: python-version: '3.x' - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '12.3.Rel1' - - name: Parse HIL json id: parse_hil_json run: | sudo apt install -y jq - BOARD_LIST=$(jq -r '.boards[] | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') - echo "BOARD_LIST=$BOARD_LIST" - echo >> $GITHUB_ENV "BOARD_LIST=$BOARD_LIST" - echo >> $GITHUB_OUTPUT "BOARD_LIST=$BOARD_LIST" - - name: Checkout pico-sdk for rp2040 - uses: actions/checkout@v4 + # Non-Espresif boards + BOARDS_LIST=$(jq -r '.boards[] | select(.flasher != "esptool") | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') + echo "BOARDS_LIST=$BOARDS_LIST" + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_ENV + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_OUTPUT + + - name: Setup ARM Toolchain + uses: ./.github/actions/setup_toolchain with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk + toolchain: 'arm-gcc' - name: Get Dependencies - run: | - pip install click - sudo apt install -y ninja-build - python3 tools/get_deps.py $BOARD_LIST + uses: ./.github/actions/get_deps + with: + arg: ${{ env.BOARDS_LIST }} - name: Build - run: | - python tools/build.py $BOARD_LIST - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + run: python tools/build.py $BOARDS_LIST - name: Upload Artifacts for Hardware Testing uses: actions/upload-artifact@v4 @@ -83,16 +77,71 @@ jobs: cmake-build/cmake-build-*/*/*/*.elf cmake-build/cmake-build-*/*/*/*.bin + # --------------------------------------- + # Build Espressif + # --------------------------------------- + build-esp: + runs-on: ubuntu-latest + outputs: + BOARDS_LIST: ${{ steps.parse_hil_json.outputs.BOARDS_LIST }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Parse HIL json + id: parse_hil_json + run: | + sudo apt install -y jq + # Espressif boards + BOARDS_LIST=$(jq -r '.boards[] | select(.flasher == "esptool") | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') + echo "BOARDS_LIST=$BOARDS_LIST" + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_ENV + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_OUTPUT + + - name: Setup ESP-IDF + if: env.BOARDS_LIST != '' + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'esp-idf' + toolchain_url: 'v5.1.1' + + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: ${{ env.BOARDS_LIST }} + + - name: Build Espressif + if: env.BOARDS_LIST != '' + run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build.py $BOARDS_LIST + + - name: Upload Artifacts for Hardware Testing + uses: actions/upload-artifact@v4 + with: + name: hil_pi4_esp + path: | + cmake-build/cmake-build-*/*/*/*.bin + cmake-build/cmake-build-*/*/*/bootloader/bootloader.bin + cmake-build/cmake-build-*/*/*/partition_table/partition-table.bin + cmake-build/cmake-build-*/*/*/config.env + cmake-build/cmake-build-*/*/*/flash_args + # --------------------------------------- # Hardware in the loop (HIL) - # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json + # Current self-hosted instance is running on an RPI4. For attached hardware checkout test/hil/pi4.json # --------------------------------------- hil-pi4: if: github.repository_owner == 'hathach' - needs: build - runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] + needs: + - build + - build-esp + runs-on: [self-hosted, rp2040, nrf52840, esp32s3, hardware-in-the-loop] env: - BOARD_LIST: ${{ needs.build.outputs.BOARD_LIST }} + BOARDS_LIST: "${{ needs.build.outputs.BOARDS_LIST }} ${{ needs.build-esp.outputs.BOARDS_LIST }}" steps: - name: Clean workspace run: | @@ -103,8 +152,7 @@ jobs: # USB bus on rpi4 is not stable, reset it before testing - name: Reset USB bus run: | - lsusb - lsusb -t + # lsusb -t # reset VIA Labs 2.0 hub sudo usbreset 001/002 @@ -119,7 +167,16 @@ jobs: name: hil_pi4 path: cmake-build + - name: Download Artifacts + uses: actions/download-artifact@v4 + with: + name: hil_pi4_esp + path: cmake-build + - name: Test on actual hardware run: | - echo "BOARD_LIST=$BOARD_LIST" - python3 test/hil/hil_test.py $BOARD_LIST pi4.json + echo "BOARDS_LIST=$BOARDS_LIST" + echo "::group::{cmake-build contents}" + tree cmake-build + echo "::endgroup::" + python3 test/hil/hil_test.py $BOARDS_LIST pi4.json diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 6b3151702..d1ffe6ca1 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -7,7 +7,7 @@ on: branches: [ master ] concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: @@ -38,7 +38,6 @@ jobs: - name: Build Fuzzer run: | - pip install click export CC=clang export CXX=clang++ fuzz_harness=$(ls -d test/fuzz/device/*/) diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index bb3ff7885..43cdab71a 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -9,6 +9,8 @@ mcu:STM32F0 mcu:KINETIS_KL family:broadcom_64bit family:broadcom_32bit +family:espressif board:curiosity_nano board:frdm_kl25z -family:espressif +# lpc55 has weird error 'ncm_interface' causes a section type conflict with 'ntb_parameters' +family:lpc55 diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index 15c176a2a..86697899b 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -12,3 +12,5 @@ board:lpcxpresso11u68 board:stm32f303disco board:stm32l412nucleo board:ek_tm4c123gxl +board:uno_r4 +board:ra4m1_ek diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 81d993ffa..1e0e60075 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -8,5 +8,4 @@ mcu:MIMXRT10XX mcu:MIMXRT11XX mcu:MSP432E4 mcu:RX65X -mcu:RAXXX mcu:MAX3421 diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index 84ed95648..d719a47b7 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -22,8 +22,8 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - src/portable/ohci/ohci.c \ src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ + src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ $(MCU_DIR)/src/clock_17xx_40xx.c \ diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index 79d868f35..ef9fe57b2 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -20,6 +20,8 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs # All source paths should be relative to the top level. SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ + src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ + src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ $(MCU_DIR)/src/clock_17xx_40xx.c \ diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 4b237e4cf..64aba011a 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -112,7 +112,7 @@ typedef struct { bool notification_xmit_is_running; // notification is currently transmitted } ncm_interface_t; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static ncm_interface_t ncm_interface; +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN tu_static ncm_interface_t ncm_interface; /** * This is the NTB parameter structure @@ -120,7 +120,7 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static ncm_interface_t ncm_interface; * \attention * We are lucky, that byte order is correct */ -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { .wLength = sizeof(ntb_parameters_t), .bmNtbFormatsSupported = 0x01,// 16-bit NTB supported .dwNtbInMaxSize = CFG_TUD_NCM_IN_NTB_MAX_SIZE, @@ -285,7 +285,7 @@ static xmit_ntb_t *xmit_get_next_ready_ntb(void) { * This must be called from netd_xfer_cb() so that ep_in is ready */ static bool xmit_insert_required_zlp(uint8_t rhport, uint32_t xferred_bytes) { - TU_LOG_DRV("xmit_insert_required_zlp(%d,%d)\n", rhport, xferred_bytes); + TU_LOG_DRV("xmit_insert_required_zlp(%d,%ld)\n", rhport, xferred_bytes); if (xferred_bytes == 0 || xferred_bytes % CFG_TUD_NET_ENDPOINT_SIZE != 0) { return false; @@ -521,11 +521,11 @@ static bool recv_validate_datagram(const recv_ntb_t *ntb, uint32_t len) { return false; } if (len < sizeof(nth16_t) + sizeof(ndp16_t) + 2 * sizeof(ndp16_datagram_t)) { - TU_LOG_DRV("(EE) ill min len: %d\n", len); + TU_LOG_DRV("(EE) ill min len: %lu\n", len); return false; } if (nth16->wBlockLength > len) { - TU_LOG_DRV("(EE) ill block length: %d > %d\n", nth16->wBlockLength, len); + TU_LOG_DRV("(EE) ill block length: %d > %lu\n", nth16->wBlockLength, len); return false; } if (nth16->wBlockLength > CFG_TUD_NCM_OUT_NTB_MAX_SIZE) { @@ -533,7 +533,7 @@ static bool recv_validate_datagram(const recv_ntb_t *ntb, uint32_t len) { return false; } if (nth16->wNdpIndex < sizeof(nth16) || nth16->wNdpIndex > len - (sizeof(ndp16_t) + 2 * sizeof(ndp16_datagram_t))) { - TU_LOG_DRV("(EE) ill position of first ndp: %d (%d)\n", nth16->wNdpIndex, len); + TU_LOG_DRV("(EE) ill position of first ndp: %d (%lu)\n", nth16->wNdpIndex, len); return false; } @@ -567,11 +567,11 @@ static bool recv_validate_datagram(const recv_ntb_t *ntb, uint32_t len) { while (ndp16_datagram[ndx].wDatagramIndex != 0 && ndp16_datagram[ndx].wDatagramLength != 0) { TU_LOG_DRV(" << %d %d\n", ndp16_datagram[ndx].wDatagramIndex, ndp16_datagram[ndx].wDatagramLength); if (ndp16_datagram[ndx].wDatagramIndex > len) { - TU_LOG_DRV("(EE) ill start of datagram[%d]: %d (%d)\n", ndx, ndp16_datagram[ndx].wDatagramIndex, len); + TU_LOG_DRV("(EE) ill start of datagram[%d]: %d (%lu)\n", ndx, ndp16_datagram[ndx].wDatagramIndex, len); return false; } if (ndp16_datagram[ndx].wDatagramIndex + ndp16_datagram[ndx].wDatagramLength > len) { - TU_LOG_DRV("(EE) ill end of datagram[%d]: %d (%d)\n", ndx, ndp16_datagram[ndx].wDatagramIndex + ndp16_datagram[ndx].wDatagramLength, len); + TU_LOG_DRV("(EE) ill end of datagram[%d]: %d (%lu)\n", ndx, ndp16_datagram[ndx].wDatagramIndex + ndp16_datagram[ndx].wDatagramLength, len); return false; } ++ndx; diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index dffb81765..c2699cc6f 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -25,10 +25,10 @@ # ACTION=="add", SUBSYSTEM=="tty", SUBSYSTEMS=="usb", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", SYMLINK+="ttyUSB_%c.%s{bInterfaceNumber}" # ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb", ENV{ID_FS_USAGE}=="filesystem", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", RUN{program}+="/usr/bin/systemd-mount --no-block --automount=yes --collect $devnode /media/blkUSB_%c.%s{bInterfaceNumber}" +import argparse import os import sys import time -import click import serial import subprocess import json @@ -318,13 +318,18 @@ def test_hid_composite_freertos(id): # ------------------------------------------------------------- # Main # ------------------------------------------------------------- -@click.command() -@click.argument('config_file') -@click.option('-b', '--board', multiple=True, default=None, help='Boards to test, all if not specified') -def main(config_file, board): +def main(): """ Hardware test on specified boards """ + parser = argparse.ArgumentParser() + parser.add_argument('config_file', help='Configuration JSON file') + parser.add_argument('-b', '--board', action='append', default=[], help='Boards to test, all if not specified') + args = parser.parse_args() + + config_file = args.config_file + boards = args.board + config_file = os.path.join(os.path.dirname(__file__), config_file) with open(config_file) as f: config = json.load(f) @@ -334,10 +339,10 @@ def main(config_file, board): 'cdc_dual_ports', 'cdc_msc', 'dfu', 'dfu_runtime', 'hid_boot_interface', ] - if len(board) == 0: + if len(boards) == 0: config_boards = config['boards'] else: - config_boards = [e for e in config['boards'] if e['name'] in board] + config_boards = [e for e in config['boards'] if e['name'] in boards] for item in config_boards: name = item['name'] diff --git a/test/hil/pi4.json b/test/hil/pi4.json index 04329bb64..bdb8a5fa5 100644 --- a/test/hil/pi4.json +++ b/test/hil/pi4.json @@ -22,6 +22,16 @@ "flasher_product": "ItsyBitsy M4 Express", "flasher_reset_pin": "2", "flasher_args": "--offset 0x4000" + }, + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "tests": [ + "cdc_msc_freertos", "hid_composite_freertos" + ], + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 1500000" } ] } diff --git a/test/hil/pi4_esp32.json b/test/hil/pi4_esp32.json deleted file mode 100644 index c95dd2d4e..000000000 --- a/test/hil/pi4_esp32.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "boards": [ - { - "name": "espressif_s3_devkitm", - "uid": "84F703C084E4", - "tests": [ - "cdc_msc_freertos", "hid_composite_freertos" - ], - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 1500000" - } - ] -} diff --git a/tools/build.py b/tools/build.py index 884cd56f4..967f7c95e 100644 --- a/tools/build.py +++ b/tools/build.py @@ -1,8 +1,8 @@ +import argparse import os import sys import time import subprocess -import click from pathlib import Path from multiprocessing import Pool @@ -125,13 +125,20 @@ def build_family(family, toolchain, build_system): return ret -@click.command() -@click.argument('families', nargs=-1, required=False) -@click.option('-b', '--board', multiple=True, default=None, help='Boards to build') -@click.option('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') -@click.option('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') -def main(families, board, toolchain, build_system): - if len(families) == 0 and len(board) == 0: +def main(): + parser = argparse.ArgumentParser() + parser.add_argument('families', nargs='*', default=[], help='Families to build') + parser.add_argument('-b', '--board', action='append', default=[], help='Boards to build') + parser.add_argument('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') + parser.add_argument('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') + args = parser.parse_args() + + families = args.families + boards = args.board + toolchain = args.toolchain + build_system = args.build_system + + if len(families) == 0 and len(boards) == 0: print("Please specify families or board to build") return 1 @@ -159,12 +166,23 @@ def main(families, board, toolchain, build_system): total_result[2] += fret[2] # build board (only cmake) - if board is not None: - for b in board: - r = build_board_cmake(b, toolchain) - total_result[0] += r[0] - total_result[1] += r[1] - total_result[2] += r[2] + if boards is not None: + for b in boards: + if build_system == 'cmake': + r = build_board_cmake(b, toolchain) + total_result[0] += r[0] + total_result[1] += r[1] + total_result[2] += r[2] + elif build_system == 'make': + all_examples = get_examples(find_family(b)) + with Pool(processes=os.cpu_count()) as pool: + pool_args = list((map(lambda e, bb=b, o=f"TOOLCHAIN={toolchain}": [e, bb, o], all_examples))) + r = pool.starmap(build_utils.build_example, pool_args) + # sum all element of same index (column sum) + rsum = list(map(sum, list(zip(*r)))) + total_result[0] += rsum[0] + total_result[1] += rsum[1] + total_result[2] += rsum[2] total_time = time.monotonic() - total_time print(build_separator) diff --git a/tools/build_esp32.py b/tools/build_esp32.py deleted file mode 100644 index 951467c23..000000000 --- a/tools/build_esp32.py +++ /dev/null @@ -1,106 +0,0 @@ -import os -import glob -import sys -import subprocess -import time - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -success_count = 0 -fail_count = 0 -skip_count = 0 -exit_status = 0 - -total_time = time.monotonic() - -build_format = '| {:30} | {:30} | {:18} | {:7} | {:6} | {:6} |' -build_separator = '-' * 107 - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -# Build all examples if not specified -all_examples = [entry.replace('examples/', '') for entry in glob.glob("examples/*/*_freertos")] -filter_with_input(all_examples) -all_examples.append('device/board_test') -all_examples.sort() - -# Build all boards if not specified -all_boards = [] -for entry in os.scandir("hw/bsp/espressif/boards"): - if entry.is_dir(): - all_boards.append(entry.name) -filter_with_input(all_boards) -all_boards.sort() - -def build_board(example, board): - global success_count, fail_count, skip_count, exit_status - start_time = time.monotonic() - - # Check if board is skipped - build_dir = f"cmake-build/cmake-build-{board}/{example}" - - # Generate and build - r = subprocess.run(f"cmake examples/{example} -B {build_dir} -G \"Ninja\" -DBOARD={board} -DMAX3421_HOST=1", - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - if r.returncode == 0: - r = subprocess.run(f"cmake --build {build_dir}", shell=True, stdout=subprocess.PIPE, - stderr=subprocess.STDOUT) - build_duration = time.monotonic() - start_time - flash_size = "-" - sram_size = "-" - - if r.returncode == 0: - success = SUCCEEDED - success_count += 1 - #(flash_size, sram_size) = build_size(example, board) - else: - exit_status = r.returncode - success = FAILED - fail_count += 1 - - title = build_format.format(example, board, success, "{:.2f}s".format(build_duration), flash_size, sram_size) - if os.getenv('CI'): - # always print build output if in CI - print(f"::group::{title}") - print(r.stdout.decode("utf-8")) - print(f"::endgroup::") - else: - # print build output if failed - print(title) - if r.returncode != 0: - print(r.stdout.decode("utf-8")) - - -def build_size(example, board): - #elf_file = 'examples/device/{}/_build/{}/{}-firmware.elf'.format(example, board, board) - elf_file = 'examples/device/{}/_build/{}/*.elf'.format(example, board) - size_output = subprocess.run('size {}'.format(elf_file), shell=True, stdout=subprocess.PIPE).stdout.decode("utf-8") - size_list = size_output.split('\n')[1].split('\t') - flash_size = int(size_list[0]) - sram_size = int(size_list[1]) + int(size_list[2]) - return (flash_size, sram_size) - - -print(build_separator) -print(build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) -print(build_separator) - -for example in all_examples: - for board in all_boards: - build_board(example, board) - -total_time = time.monotonic() - total_time -print(build_separator) -print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(success_count, SUCCEEDED, fail_count, FAILED, skip_count, SKIPPED, total_time)) -print(build_separator) - -sys.exit(exit_status) diff --git a/tools/get_deps.py b/tools/get_deps.py index 2359b4bd0..20cbe64c7 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -245,11 +245,10 @@ def main(): args = parser.parse_args() families = args.families - board = args.board + boards = args.board - if len(families) == 0 and len(board) == 0: - print("Please specify family or board to fetch") - return + if len(families) == 0 and len(boards) == 0: + print("Warning: family and board are not specified, only fetching mandatory dependencies.") status = 0 deps = list(deps_mandatory.keys()) @@ -258,8 +257,8 @@ def main(): deps += deps_optional.keys() else: families = list(families) - if board is not None: - for b in board: + if boards is not None: + for b in boards: f = find_family(b) if f is not None: families.append(f) -- cgit v1.3.1 From f93eb40b1d9f52ec4b8557e190ad64b3588c63c9 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 18 Jun 2024 12:52:32 +0700 Subject: add host/device_info example --- examples/dual/host_hid_to_device_cdc/src/main.c | 107 +++++------ .../dual/host_hid_to_device_cdc/src/tusb_config.h | 6 +- .../host_hid_to_device_cdc/src/usb_descriptors.c | 98 +++++----- examples/host/CMakeLists.txt | 1 + examples/host/bare_api/src/main.c | 4 - examples/host/bare_api/src/tusb_config.h | 6 +- examples/host/device_info/CMakeLists.txt | 32 ++++ examples/host/device_info/Makefile | 13 ++ examples/host/device_info/only.txt | 14 ++ examples/host/device_info/src/main.c | 211 +++++++++++++++++++++ examples/host/device_info/src/tusb_config.h | 115 +++++++++++ 11 files changed, 479 insertions(+), 128 deletions(-) create mode 100644 examples/host/device_info/CMakeLists.txt create mode 100644 examples/host/device_info/Makefile create mode 100644 examples/host/device_info/only.txt create mode 100644 examples/host/device_info/src/main.c create mode 100644 examples/host/device_info/src/tusb_config.h (limited to 'examples/host') diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 96a2beff5..0b4165e38 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -55,14 +55,14 @@ const uint8_t colemak[128] = { }; #endif -static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; +static uint8_t const keycode2ascii[128][2] = {HID_KEYCODE_TO_ASCII}; /* Blink pattern * - 250 ms : device not mounted * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, BLINK_MOUNTED = 1000, BLINK_SUSPENDED = 2500, @@ -73,8 +73,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; void led_blinking_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host HID <-> Device CDC Example\r\n"); @@ -87,8 +86,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { tud_task(); // tinyusb device task tuh_task(); // tinyusb host task led_blinking_task(); @@ -102,35 +100,30 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ +void tud_suspend_cb(bool remote_wakeup_en) { (void) remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } // Invoked when CDC interface received data from host -void tud_cdc_rx_cb(uint8_t itf) -{ +void tud_cdc_rx_cb(uint8_t itf) { (void) itf; char buf[64]; @@ -149,38 +142,36 @@ void tud_cdc_rx_cb(uint8_t itf) // can be used to parse common/simple enough descriptor. // Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped // therefore report_desc = NULL, desc_len = 0 -void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) -{ - (void)desc_report; - (void)desc_len; +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len) { + (void) desc_report; + (void) desc_len; // Interface protocol (hid_interface_protocol_enum_t) - const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; + const char* protocol_str[] = {"None", "Keyboard", "Mouse"}; uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); uint16_t vid, pid; tuh_vid_pid_get(dev_addr, &vid, &pid); char tempbuf[256]; - int count = sprintf(tempbuf, "[%04x:%04x][%u] HID Interface%u, Protocol = %s\r\n", vid, pid, dev_addr, instance, protocol_str[itf_protocol]); + int count = sprintf( + tempbuf, "[%04x:%04x][%u] HID Interface%u, Protocol = %s\r\n", vid, pid, dev_addr, instance, + protocol_str[itf_protocol]); tud_cdc_write(tempbuf, (uint32_t) count); tud_cdc_write_flush(); // Receive report from boot keyboard & mouse only // tuh_hid_report_received_cb() will be invoked when report is available - if (itf_protocol == HID_ITF_PROTOCOL_KEYBOARD || itf_protocol == HID_ITF_PROTOCOL_MOUSE) - { - if ( !tuh_hid_receive_report(dev_addr, instance) ) - { + if (itf_protocol == HID_ITF_PROTOCOL_KEYBOARD || itf_protocol == HID_ITF_PROTOCOL_MOUSE) { + if (!tuh_hid_receive_report(dev_addr, instance)) { tud_cdc_write_str("Error: cannot request report\r\n"); } } } // Invoked when device with hid interface is un-mounted -void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) -{ +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) { char tempbuf[256]; int count = sprintf(tempbuf, "[%u] HID Interface%u is unmounted\r\n", dev_addr, instance); tud_cdc_write(tempbuf, (uint32_t) count); @@ -188,11 +179,9 @@ void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) } // look up new key in previous keys -static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) -{ - for(uint8_t i=0; i<6; i++) - { - if (report->keycode[i] == keycode) return true; +static inline bool find_key_in_report(hid_keyboard_report_t const* report, uint8_t keycode) { + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i] == keycode) return true; } return false; @@ -200,22 +189,17 @@ static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8 // convert hid keycode to ascii and print via usb device CDC (ignore non-printable) -static void process_kbd_report(uint8_t dev_addr, hid_keyboard_report_t const *report) -{ +static void process_kbd_report(uint8_t dev_addr, hid_keyboard_report_t const* report) { (void) dev_addr; - static hid_keyboard_report_t prev_report = { 0, 0, {0} }; // previous report to check key released + static hid_keyboard_report_t prev_report = {0, 0, {0}}; // previous report to check key released bool flush = false; - for(uint8_t i=0; i<6; i++) - { + for (uint8_t i = 0; i < 6; i++) { uint8_t keycode = report->keycode[i]; - if ( keycode ) - { - if ( find_key_in_report(&prev_report, keycode) ) - { + if (keycode) { + if (find_key_in_report(&prev_report, keycode)) { // exist in previous report means the current key is holding - }else - { + } else { // not existed in previous report means the current key is pressed // remap the key code for Colemak layout @@ -227,8 +211,7 @@ static void process_kbd_report(uint8_t dev_addr, hid_keyboard_report_t const *re bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); uint8_t ch = keycode2ascii[keycode][is_shift ? 1 : 0]; - if (ch) - { + if (ch) { if (ch == '\n') tud_cdc_write("\r", 1); tud_cdc_write(&ch, 1); flush = true; @@ -244,13 +227,12 @@ static void process_kbd_report(uint8_t dev_addr, hid_keyboard_report_t const *re } // send mouse report to usb device CDC -static void process_mouse_report(uint8_t dev_addr, hid_mouse_report_t const * report) -{ +static void process_mouse_report(uint8_t dev_addr, hid_mouse_report_t const* report) { //------------- button state -------------// //uint8_t button_changed_mask = report->buttons ^ prev_report.buttons; - char l = report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-'; + char l = report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-'; char m = report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-'; - char r = report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'; + char r = report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'; char tempbuf[32]; int count = sprintf(tempbuf, "[%u] %c%c%c %d %d %d\r\n", dev_addr, l, m, r, report->x, report->y, report->wheel); @@ -260,27 +242,25 @@ static void process_mouse_report(uint8_t dev_addr, hid_mouse_report_t const * re } // Invoked when received report from device via interrupt endpoint -void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) -{ +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) { (void) len; uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); - switch(itf_protocol) - { + switch (itf_protocol) { case HID_ITF_PROTOCOL_KEYBOARD: - process_kbd_report(dev_addr, (hid_keyboard_report_t const*) report ); - break; + process_kbd_report(dev_addr, (hid_keyboard_report_t const*) report); + break; case HID_ITF_PROTOCOL_MOUSE: - process_mouse_report(dev_addr, (hid_mouse_report_t const*) report ); - break; + process_mouse_report(dev_addr, (hid_mouse_report_t const*) report); + break; - default: break; + default: + break; } // continue to request to receive report - if ( !tuh_hid_receive_report(dev_addr, instance) ) - { + if (!tuh_hid_receive_report(dev_addr, instance)) { tud_cdc_write_str("Error: cannot request report\r\n"); } } @@ -288,13 +268,12 @@ void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t cons //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h index 8133ed418..2843e0b83 100644 --- a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h +++ b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -144,4 +144,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index 293620042..9d57737fb 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -42,44 +42,41 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = USB_BCD, +tusb_desc_device_t const desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = USB_BCD, - // Use Interface Association Descriptor (IAD) for CDC - // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = USB_VID, - .idProduct = USB_PID, - .bcdDevice = 0x0100, + .idVendor = USB_VID, + .idProduct = USB_PID, + .bcdDevice = 0x0100, - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, - .bNumConfigurations = 0x01 + .bNumConfigurations = 0x01 }; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +uint8_t const* tud_descriptor_device_cb(void) { + return (uint8_t const*) &desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -enum -{ +enum { ITF_NUM_CDC = 0, ITF_NUM_CDC_DATA, ITF_NUM_TOTAL @@ -92,7 +89,7 @@ enum #define EPNUM_CDC_OUT 0x02 #define EPNUM_CDC_IN 0x82 -#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_NOTIF 0x81 @@ -109,7 +106,7 @@ enum #define EPNUM_CDC_IN 0x81 #elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X - // FT9XX doesn't support a same endpoint number with different direction IN and OUT +// FT9XX doesn't support a same endpoint number with different direction IN and OUT // e.g EP1 OUT & EP1 IN cannot exist together #define EPNUM_CDC_NOTIF 0x81 #define EPNUM_CDC_OUT 0x02 @@ -125,21 +122,19 @@ enum #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) // full speed configuration -uint8_t const desc_fs_configuration[] = -{ - // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), +uint8_t const desc_fs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), - // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), }; #if TUD_OPT_HIGH_SPEED // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // high speed configuration -uint8_t const desc_hs_configuration[] = -{ +uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), @@ -151,8 +146,7 @@ uint8_t const desc_hs_configuration[] = uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = -{ +tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, .bcdUSB = USB_BCD, @@ -170,16 +164,14 @@ tusb_desc_device_qualifier_t const desc_device_qualifier = // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. // device_qualifier descriptor describes information about a high-speed capable device that would // change if the device were operating at the other speed. If not highspeed capable stall this request. -uint8_t const* tud_descriptor_device_qualifier_cb(void) -{ +uint8_t const* tud_descriptor_device_qualifier_cb(void) { return (uint8_t const*) &desc_device_qualifier; } // Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete // Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa -uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) -{ +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) { (void) index; // for multiple configurations // if link speed is high return fullspeed config, and vice versa @@ -199,8 +191,7 @@ uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const* tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations #if TUD_OPT_HIGH_SPEED @@ -224,24 +215,23 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = -{ - (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) - "TinyUSB", // 1: Manufacturer - "TinyUSB Device", // 2: Product - NULL, // 3: Serials will use unique ID if possible - "TinyUSB CDC", // 4: CDC Interface +char const* string_desc_arr[] = { + (const char[]) {0x09, 0x04}, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials will use unique ID if possible + "TinyUSB CDC", // 4: CDC Interface }; static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { (void) langid; size_t chr_count; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; @@ -255,17 +245,17 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) return NULL; - const char *str = string_desc_arr[index]; + const char* str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) chr_count = max_count; // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index e6a2ece14..793f6ab08 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -9,5 +9,6 @@ family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) family_add_subdirectory(bare_api) family_add_subdirectory(cdc_msc_hid) family_add_subdirectory(cdc_msc_hid_freertos) +family_add_subdirectory(device_info) family_add_subdirectory(hid_controller) family_add_subdirectory(msc_file_explorer) diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 670e58498..ae574c078 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -23,10 +23,6 @@ * */ -/* This example current worked and tested with following controller - * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc - */ - #include #include diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index 432446e94..fab233be0 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -118,4 +118,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif diff --git a/examples/host/device_info/CMakeLists.txt b/examples/host/device_info/CMakeLists.txt new file mode 100644 index 000000000..76182d6fa --- /dev/null +++ b/examples/host/device_info/CMakeLists.txt @@ -0,0 +1,32 @@ +cmake_minimum_required(VERSION 3.17) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT} C CXX ASM) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} noos) diff --git a/examples/host/device_info/Makefile b/examples/host/device_info/Makefile new file mode 100644 index 000000000..0235e08c3 --- /dev/null +++ b/examples/host/device_info/Makefile @@ -0,0 +1,13 @@ +include ../../build_system/make/make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += \ + src/main.c + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +include ../../build_system/make/rules.mk diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt new file mode 100644 index 000000000..fee10f9e2 --- /dev/null +++ b/examples/host/device_info/only.txt @@ -0,0 +1,14 @@ +mcu:KINETIS_KL +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT1XXX +mcu:MIMXRT10XX +mcu:MIMXRT11XX +mcu:RP2040 +mcu:MSP432E4 +mcu:RX65X +mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c new file mode 100644 index 000000000..60d7e9c80 --- /dev/null +++ b/examples/host/device_info/src/main.c @@ -0,0 +1,211 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* Host example will get device descriptors of attached devices and print it out via + * device cdc (Serial) as follows: + * Device 1: ID 046d:c52f + Device Descriptor: + bLength 18 + bDescriptorType 1 + bcdUSB 0200 + bDeviceClass 0 + bDeviceSubClass 0 + bDeviceProtocol 0 + bMaxPacketSize0 8 + idVendor 0x046d + idProduct 0xc52f + bcdDevice 2200 + iManufacturer 1 Logitech + iProduct 2 USB Receiver + iSerialNumber 0 + bNumConfigurations 1 + * + */ + +#include +#include +#include + +#include "bsp/board_api.h" +#include "tusb.h" + +// English +#define LANGUAGE_ID 0x0409 + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +void led_blinking_task(void); +static void print_utf16(uint16_t* temp_buf, size_t buf_len); + +/*------------- MAIN -------------*/ +int main(void) { + board_init(); + + printf("TinyUSB Device Info Example\r\n"); + + // init host stack on configured roothub port + tuh_init(BOARD_TUH_RHPORT); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + + while (1) { + // tinyusb host task + tuh_task(); + led_blinking_task(); + } + + return 0; +} + +/*------------- TinyUSB Callbacks -------------*/ + +// Invoked when device is mounted (configured) +void tuh_mount_cb(uint8_t daddr) { + // Get Device Descriptor + tusb_desc_device_t desc_device; + uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); + if (XFER_RESULT_SUCCESS != xfer_result) { + printf("Failed to get device descriptor\r\n"); + return; + } + + uint16_t buf[256]; + + printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); + printf("Device Descriptor:\r\n"); + printf(" bLength %u\r\n", desc_device.bLength); + printf(" bDescriptorType %u\r\n", desc_device.bDescriptorType); + printf(" bcdUSB %04x\r\n", desc_device.bcdUSB); + printf(" bDeviceClass %u\r\n", desc_device.bDeviceClass); + printf(" bDeviceSubClass %u\r\n", desc_device.bDeviceSubClass); + printf(" bDeviceProtocol %u\r\n", desc_device.bDeviceProtocol); + printf(" bMaxPacketSize0 %u\r\n", desc_device.bMaxPacketSize0); + printf(" idVendor 0x%04x\r\n", desc_device.idVendor); + printf(" idProduct 0x%04x\r\n", desc_device.idProduct); + printf(" bcdDevice %04x\r\n", desc_device.bcdDevice); + + // Get String descriptor using Sync API + + printf(" iManufacturer %u ", desc_device.iManufacturer); + xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16(buf, TU_ARRAY_SIZE(buf)); + } + printf("\r\n"); + + printf(" iProduct %u ", desc_device.iProduct); + xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16(buf, TU_ARRAY_SIZE(buf)); + } + printf("\r\n"); + + printf(" iSerialNumber %u ", desc_device.iSerialNumber); + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16(buf, TU_ARRAY_SIZE(buf)); + } + printf("\r\n"); + + printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); +} + +/// Invoked when device is unmounted (bus reset/unplugged) +void tuh_umount_cb(uint8_t daddr) { + printf("Device removed, address = %d\r\n", daddr); +} + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) { + const uint32_t interval_ms = 1000; + static uint32_t start_ms = 0; + + static bool led_state = false; + + // Blink every interval ms + if (board_millis() - start_ms < interval_ms) return; // not enough time + start_ms += interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} + +//--------------------------------------------------------------------+ +// String Descriptor Helper +//--------------------------------------------------------------------+ + +static void _convert_utf16le_to_utf8(const uint16_t* utf16, size_t utf16_len, uint8_t* utf8, size_t utf8_len) { + // TODO: Check for runover. + (void) utf8_len; + // Get the UTF-16 length out of the data itself. + + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t) (0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t) (0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); + } + // TODO: Handle UTF-16 code points that take two entries. + } +} + +// Count how many bytes a utf-16-le encoded string will take in utf-8. +static int _count_utf8_bytes(const uint16_t* buf, size_t len) { + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; + } + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; +} + +static void print_utf16(uint16_t* temp_buf, size_t buf_len) { + if ((temp_buf[0] & 0xff) == 0) return; // empty + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t*) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t*) temp_buf)[utf8_len] = '\0'; + + printf("%s", (char*) temp_buf); +} diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h new file mode 100644 index 000000000..484f651b1 --- /dev/null +++ b/examples/host/device_info/src/tusb_config.h @@ -0,0 +1,115 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//-------------------------------------------------------------------- +// Common Configuration +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// Driver Configuration +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +// only hub class is enabled +#define CFG_TUH_HUB 1 + +// max device support (excluding hub device) +// 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) + +#ifdef __cplusplus + } +#endif + +#endif -- cgit v1.3.1 From d945261aef7e2c922153e2a85d00791dd1930740 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 18 Jun 2024 12:53:02 +0700 Subject: LOG3 in isr --- examples/host/device_info/src/tusb_config.h | 2 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 4 ++-- src/portable/nxp/khci/dcd_khci.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'examples/host') diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 484f651b1..2e9731eaf 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -70,7 +70,7 @@ #define CFG_TUH_ENABLED 1 #if CFG_TUSB_MCU == OPT_MCU_RP2040 - #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index abce35245..1cc5c1836 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -907,9 +907,9 @@ void tusb_hal_nrf_power_event(uint32_t event) { USB_EVT_READY = 2 }; -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= 3 const char* const power_evt_str[] = {"Detected", "Removed", "Ready"}; - TU_LOG(2, "Power USB event: %s\r\n", power_evt_str[event]); + TU_LOG(3, "Power USB event: %s\r\n", power_evt_str[event]); #endif switch (event) { diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index dc71117b3..ef61146aa 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -540,7 +540,7 @@ void dcd_int_handler(uint8_t rhport) } if (is & USB_ISTAT_SLEEP_MASK) { - // TU_LOG2("Suspend: "); TU_LOG2_HEX(is); + // TU_LOG3("Suspend: "); TU_LOG2_HEX(is); // Note Host usually has extra delay after bus reset (without SOF), which could falsely // detected as Sleep event. Though usbd has debouncing logic so we are good -- cgit v1.3.1 From de62b55042a40a0b1117600d3686787a253c0109 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 18 Jun 2024 13:29:04 +0700 Subject: add dual/host_info_to_device_cdc example --- examples/dual/CMakeLists.txt | 1 + .../dual/host_info_to_device_cdc/CMakeLists.txt | 40 +++ examples/dual/host_info_to_device_cdc/Makefile | 17 ++ examples/dual/host_info_to_device_cdc/only.txt | 6 + examples/dual/host_info_to_device_cdc/src/main.c | 285 +++++++++++++++++++++ .../dual/host_info_to_device_cdc/src/tusb_config.h | 143 +++++++++++ .../host_info_to_device_cdc/src/usb_descriptors.c | 268 +++++++++++++++++++ examples/host/device_info/src/main.c | 3 +- 8 files changed, 761 insertions(+), 2 deletions(-) create mode 100644 examples/dual/host_info_to_device_cdc/CMakeLists.txt create mode 100644 examples/dual/host_info_to_device_cdc/Makefile create mode 100644 examples/dual/host_info_to_device_cdc/only.txt create mode 100644 examples/dual/host_info_to_device_cdc/src/main.c create mode 100644 examples/dual/host_info_to_device_cdc/src/tusb_config.h create mode 100644 examples/dual/host_info_to_device_cdc/src/usb_descriptors.c (limited to 'examples/host') diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt index 15081cf26..f11074e93 100644 --- a/examples/dual/CMakeLists.txt +++ b/examples/dual/CMakeLists.txt @@ -10,4 +10,5 @@ if (FAMILY STREQUAL "rp2040" AND NOT TARGET tinyusb_pico_pio_usb) else () # family_add_subdirectory will filter what to actually add based on selected FAMILY family_add_subdirectory(host_hid_to_device_cdc) + family_add_subdirectory(host_info_to_device_cdc) endif () diff --git a/examples/dual/host_info_to_device_cdc/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/CMakeLists.txt new file mode 100644 index 000000000..a6557c2d0 --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/CMakeLists.txt @@ -0,0 +1,40 @@ +cmake_minimum_required(VERSION 3.17) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT} C CXX ASM) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_dual_usb_example(${PROJECT} noos) + +# due to warnings from Pico-PIO-USB +target_compile_options(${PROJECT} PUBLIC + -Wno-error=shadow + -Wno-error=cast-align + -Wno-error=cast-qual + -Wno-error=redundant-decls + -Wno-error=sign-conversion + -Wno-error=conversion + -Wno-error=sign-compare + -Wno-error=unused-function + ) diff --git a/examples/dual/host_info_to_device_cdc/Makefile b/examples/dual/host_info_to_device_cdc/Makefile new file mode 100644 index 000000000..0ede79c17 --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/Makefile @@ -0,0 +1,17 @@ +include ../../build_system/make/make.mk + +INC += \ + src \ + $(TOP)/hw \ + +# Example source +EXAMPLE_SOURCE += $(wildcard src/*.c) +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference + +SRC_C += \ + src/host/hub.c \ + src/host/usbh.c + +include ../../build_system/make/rules.mk diff --git a/examples/dual/host_info_to_device_cdc/only.txt b/examples/dual/host_info_to_device_cdc/only.txt new file mode 100644 index 000000000..cfc87eb4e --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/only.txt @@ -0,0 +1,6 @@ +board:mimxrt1060_evk +board:mimxrt1064_evk +board:mcb1800 +mcu:RP2040 +mcu:ra6m5 +mcu:MAX3421 diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c new file mode 100644 index 000000000..5be531098 --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -0,0 +1,285 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +/* Host example will get device descriptors of attached devices and print it out via device cdc as follows: + * Device 1: ID 046d:c52f + Device Descriptor: + bLength 18 + bDescriptorType 1 + bcdUSB 0200 + bDeviceClass 0 + bDeviceSubClass 0 + bDeviceProtocol 0 + bMaxPacketSize0 8 + idVendor 0x046d + idProduct 0xc52f + bcdDevice 2200 + iManufacturer 1 Logitech + iProduct 2 USB Receiver + iSerialNumber 0 + bNumConfigurations 1 + * + */ + +#include +#include +#include + +#include "bsp/board_api.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTYPES +//--------------------------------------------------------------------+ +// Language ID: English +#define LANGUAGE_ID 0x0409 + +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; + +static bool is_print[CFG_TUH_DEVICE_MAX+1] = { 0 }; + +static void print_utf16(uint16_t *temp_buf, size_t buf_len); +void led_blinking_task(void); +void cdc_task(void); + +/*------------- MAIN -------------*/ +int main(void) { + board_init(); + + printf("TinyUSB Host Information -> Device CDC Example\r\n"); + + // init device and host stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); + tuh_init(BOARD_TUH_RHPORT); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + + while (1) { + tud_task(); // tinyusb device task + tuh_task(); // tinyusb host task + cdc_task(); + led_blinking_task(); + } + + return 0; +} + +//--------------------------------------------------------------------+ +// Device CDC +//--------------------------------------------------------------------+ + +// Invoked when device is mounted +void tud_mount_cb(void) { + blink_interval_ms = BLINK_MOUNTED; +} + +// Invoked when device is unmounted +void tud_umount_cb(void) { + blink_interval_ms = BLINK_NOT_MOUNTED; +} + +// Invoked when usb bus is suspended +// remote_wakeup_en : if host allow us to perform remote wakeup +// Within 7ms, device must draw an average of current less than 2.5 mA from bus +void tud_suspend_cb(bool remote_wakeup_en) { + (void) remote_wakeup_en; + blink_interval_ms = BLINK_SUSPENDED; +} + +// Invoked when usb bus is resumed +void tud_resume_cb(void) { + blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; +} + +#if 1 +#define cdc_printf(...) \ + do { \ + char _tempbuf[256]; \ + int count = sprintf(_tempbuf, __VA_ARGS__); \ + tud_cdc_write(_tempbuf, (uint32_t) count); \ + tud_cdc_write_flush(); \ + tud_task(); \ + } while(0) +#endif + +//#define cdc_printf printf + +void print_device_info(uint8_t daddr) { + tusb_desc_device_t desc_device; + uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); + if (XFER_RESULT_SUCCESS != xfer_result) { + tud_cdc_write_str("Failed to get device descriptor\r\n"); + return; + } + + cdc_printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); + cdc_printf("Device Descriptor:\r\n"); + cdc_printf(" bLength %u\r\n" , desc_device.bLength); + cdc_printf(" bDescriptorType %u\r\n" , desc_device.bDescriptorType); + cdc_printf(" bcdUSB %04x\r\n" , desc_device.bcdUSB); + cdc_printf(" bDeviceClass %u\r\n" , desc_device.bDeviceClass); + cdc_printf(" bDeviceSubClass %u\r\n" , desc_device.bDeviceSubClass); + cdc_printf(" bDeviceProtocol %u\r\n" , desc_device.bDeviceProtocol); + cdc_printf(" bMaxPacketSize0 %u\r\n" , desc_device.bMaxPacketSize0); + cdc_printf(" idVendor 0x%04x\r\n" , desc_device.idVendor); + cdc_printf(" idProduct 0x%04x\r\n" , desc_device.idProduct); + cdc_printf(" bcdDevice %04x\r\n" , desc_device.bcdDevice); + + // Get String descriptor using Sync API + uint16_t buf[128]; + + cdc_printf(" iManufacturer %u " , desc_device.iManufacturer); + xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); + if (XFER_RESULT_SUCCESS == xfer_result ) { + print_utf16(buf, TU_ARRAY_SIZE(buf)); + } + tud_cdc_write_str("\r\n"); + + cdc_printf(" iProduct %u " , desc_device.iProduct); + xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16(buf, TU_ARRAY_SIZE(buf)); + } + tud_cdc_write_str("\r\n"); + + cdc_printf(" iSerialNumber %u " , desc_device.iSerialNumber); + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16(buf, TU_ARRAY_SIZE(buf)); + } + tud_cdc_write_str("\r\n"); + + cdc_printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); +} + +void cdc_task(void) { + if (tud_cdc_connected()) { + for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { + if (tuh_mounted(daddr)) { + if (is_print[daddr]) { + is_print[daddr] = false; + print_device_info(daddr); + tud_cdc_write_flush(); + } + } + } + } +} + +//--------------------------------------------------------------------+ +// Host Get device information +//--------------------------------------------------------------------+ +void tuh_mount_cb(uint8_t daddr) { + printf("mounted device %u\r\n", daddr); + is_print[daddr] = true; +} + +void tuh_umount_cb(uint8_t daddr) { + printf("unmounted device %u\r\n", daddr); + is_print[daddr] = false; +} + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; + + // Blink every interval ms + if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} + +//--------------------------------------------------------------------+ +// String Descriptor Helper +//--------------------------------------------------------------------+ + +static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) { + // TODO: Check for runover. + (void)utf8_len; + // Get the UTF-16 length out of the data itself. + + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t)(0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); + } + // TODO: Handle UTF-16 code points that take two entries. + } +} + +// Count how many bytes a utf-16-le encoded string will take in utf-8. +static int _count_utf8_bytes(const uint16_t *buf, size_t len) { + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; + } + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; +} + +static void print_utf16(uint16_t *temp_buf, size_t buf_len) { + if ((temp_buf[0] & 0xff) == 0) return; // empty + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t*) temp_buf)[utf8_len] = '\0'; + + tud_cdc_write(temp_buf, utf8_len); + tud_cdc_write_flush(); + tud_task(); +} diff --git a/examples/dual/host_info_to_device_cdc/src/tusb_config.h b/examples/dual/host_info_to_device_cdc/src/tusb_config.h new file mode 100644 index 000000000..bb47fbf4a --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/src/tusb_config.h @@ -0,0 +1,143 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_TUD_RHPORT +#define BOARD_TUD_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUD_MAX_SPEED +#define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +// RHPort number used for host can be defined by board.mk, default to port 1 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 1 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Device stack, Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_ENABLED 1 +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED + +// Enable Host stack, Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_ENABLED 1 +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 +// Use pico-pio-usb as host controller for raspberry rp2040 +#define CFG_TUH_RPI_PIO_USB 1 +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUD_MEM_SECTION +#define CFG_TUD_MEM_SECTION +#endif + +#ifndef CFG_TUD_MEM_ALIGN +#define CFG_TUD_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE 64 +#endif + +//------------- CLASS -------------// +#define CFG_TUD_CDC 1 + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +// CDC Endpoint transfer buffer size, more is faster +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + +//-------------------------------------------------------------------- +// HOST CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +#define CFG_TUH_HUB 1 +// max device support (excluding hub device) +#define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c new file mode 100644 index 000000000..9d57737fb --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/src/usb_descriptors.c @@ -0,0 +1,268 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board_api.h" +#include "tusb.h" + +/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. + * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. + * + * Auto ProductID layout's Bitmap: + * [MSB] HID | MSC | CDC [LSB] + */ +#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) +#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ + _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) + +#define USB_VID 0xCafe +#define USB_BCD 0x0200 + +//--------------------------------------------------------------------+ +// Device Descriptors +//--------------------------------------------------------------------+ +tusb_desc_device_t const desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = USB_BCD, + + // Use Interface Association Descriptor (IAD) for CDC + // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = USB_VID, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01 +}; + +// Invoked when received GET DEVICE DESCRIPTOR +// Application return pointer to descriptor +uint8_t const* tud_descriptor_device_cb(void) { + return (uint8_t const*) &desc_device; +} + +//--------------------------------------------------------------------+ +// Configuration Descriptor +//--------------------------------------------------------------------+ + +enum { + ITF_NUM_CDC = 0, + ITF_NUM_CDC_DATA, + ITF_NUM_TOTAL +}; + +#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX + // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number + // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ... + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG || CFG_TUSB_MCU == OPT_MCU_SAMX7X + // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + +#elif CFG_TUSB_MCU == OPT_MCU_CXD56 + // CXD56 doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number + // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) + #define EPNUM_CDC_NOTIF 0x83 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x81 + +#elif CFG_TUSB_MCU == OPT_MCU_FT90X || CFG_TUSB_MCU == OPT_MCU_FT93X +// FT9XX doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x83 + +#else + #define EPNUM_CDC_NOTIF 0x81 + #define EPNUM_CDC_OUT 0x02 + #define EPNUM_CDC_IN 0x82 + +#endif + +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN) + +// full speed configuration +uint8_t const desc_fs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), +}; + +#if TUD_OPT_HIGH_SPEED +// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration + +// high speed configuration +uint8_t const desc_hs_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), +}; + +// other speed configuration +uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = { + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = USB_BCD, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const* tud_descriptor_device_qualifier_cb(void) { + return (uint8_t const*) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG + memcpy(desc_other_speed_config, + (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration, + CONFIG_TOTAL_LEN); + + desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG; + + return desc_other_speed_config; +} + +#endif // highspeed + + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const* tud_descriptor_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif +} + +//--------------------------------------------------------------------+ +// String Descriptors +//--------------------------------------------------------------------+ + +// String Descriptor Index +enum { + STRID_LANGID = 0, + STRID_MANUFACTURER, + STRID_PRODUCT, + STRID_SERIAL, +}; + +// array of pointer to string descriptors +char const* string_desc_arr[] = { + (const char[]) {0x09, 0x04}, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials will use unique ID if possible + "TinyUSB CDC", // 4: CDC Interface +}; + +static uint16_t _desc_str[32 + 1]; + +// Invoked when received GET STRING DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void) langid; + size_t chr_count; + + switch (index) { + case STRID_LANGID: + memcpy(&_desc_str[1], string_desc_arr[0], 2); + chr_count = 1; + break; + + case STRID_SERIAL: + chr_count = board_usb_get_serial(_desc_str + 1, 32); + break; + + default: + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors + + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) return NULL; + + const char* str = string_desc_arr[index]; + + // Cap at max char + chr_count = strlen(str); + size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) chr_count = max_count; + + // Convert ASCII string into UTF-16 + for (size_t i = 0; i < chr_count; i++) { + _desc_str[1 + i] = str[i]; + } + break; + } + + // first byte is length (including header), second byte is string type + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + + return _desc_str; +} diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 60d7e9c80..18beea663 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -23,8 +23,7 @@ * */ -/* Host example will get device descriptors of attached devices and print it out via - * device cdc (Serial) as follows: +/* Host example will get device descriptors of attached devices and print it out via uart/rtt (logger) as follows: * Device 1: ID 046d:c52f Device Descriptor: bLength 18 -- cgit v1.3.1 From 31a979a6cccc2d4dc0a86474643710ae3b7f34fe Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Wed, 17 Jul 2024 21:08:55 -0500 Subject: fix some clang compiler warnings --- examples/host/cdc_msc_hid/src/hid_app.c | 1 + examples/host/hid_controller/src/hid_app.c | 1 + src/class/hid/hid_host.c | 4 +++- 3 files changed, 5 insertions(+), 1 deletion(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index f0d42a08f..6bb3a2072 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -235,6 +235,7 @@ static void process_mouse_report(hid_mouse_report_t const * report) static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) { (void) dev_addr; + (void) len; uint8_t const rpt_count = hid_info[instance].report_count; tuh_hid_report_info_t* rpt_info_arr = hid_info[instance].report_info; diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index bff830ca2..6ffe0b6d4 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -253,6 +253,7 @@ bool diff_report(sony_ds4_report_t const* rpt1, sony_ds4_report_t const* rpt2) void process_sony_ds4(uint8_t const* report, uint16_t len) { + (void)len; const char* dpad_str[] = { "N", "NE", "E", "SE", "S", "SW", "W", "NW", "none" }; // previous report used to compare for changes diff --git a/src/class/hid/hid_host.c b/src/class/hid/hid_host.c index 115a8a4df..7639a8fc6 100644 --- a/src/class/hid/hid_host.c +++ b/src/class/hid/hid_host.c @@ -657,7 +657,9 @@ uint8_t tuh_hid_parse_report_descriptor(tuh_hid_report_info_t* report_info_arr, uint8_t const data8 = desc_report[0]; TU_LOG(3, "tag = %d, type = %d, size = %d, data = ", tag, type, size); - for (uint32_t i = 0; i < size; i++) TU_LOG(3, "%02X ", desc_report[i]); + for (uint32_t i = 0; i < size; i++) { + TU_LOG(3, "%02X ", desc_report[i]); + } TU_LOG(3, "\r\n"); switch (type) { -- cgit v1.3.1