From 5e78f08a24a1f53d66be9bc2df82051fc70cdf90 Mon Sep 17 00:00:00 2001 From: dsugisawa-mixi Date: Sat, 17 Jun 2023 19:04:17 +0900 Subject: fix example of bare_api, check empty string --- examples/host/bare_api/src/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'examples/host') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index bb7fa850e..d1ee5e9ac 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -410,6 +410,7 @@ static int _count_utf8_bytes(const uint16_t *buf, size_t len) { } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { + if ((temp_buf[0] & 0xff) == 0) return; // empty size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); -- cgit v1.3.1 From f7e7ba92ca7850c3c098fc988bf187a8b12a322a Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Jul 2023 16:27:12 +0700 Subject: enable host example for ra --- .idea/cmake.xml | 1 + examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + 5 files changed, 5 insertions(+) (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 47ca8253e..864ff615b 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -46,6 +46,7 @@ + \ No newline at end of file diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 45da6c3f2..f8aa2186f 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -9,3 +9,4 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 45da6c3f2..f8aa2186f 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -9,3 +9,4 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 45da6c3f2..f8aa2186f 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -9,3 +9,4 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 45da6c3f2..f8aa2186f 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -9,3 +9,4 @@ mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X +mcu:RAXXX -- cgit v1.3.1 From 3678a25baaeb6cd6f269d405903aeca23e93dca6 Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Tue, 18 Jul 2023 09:02:59 -0500 Subject: Fix build issues when building for RP2040 from pico-examples/pico-sdk. * include_guard requires GLOBAL as family.cmake is included in multiple non child places * the following recently added check is suprfluous (family_configure_host_example for rp2040 should do this already), and breaks if pico_pio_usb is not avaialble, so i have removed # Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host if(FAMILY STREQUAL "rp2040") family_add_pico_pio_usb(${PROJECT}) endif() * added new familt_example_missing_dependency functino to print missing dependency warning, so pico-examples can override it to be less in your face, and also more contextual to pico-examples --- examples/device/net_lwip_webserver/CMakeLists.txt | 8 ++++---- examples/host/bare_api/CMakeLists.txt | 7 +------ examples/host/cdc_msc_hid/CMakeLists.txt | 5 ----- examples/host/hid_controller/CMakeLists.txt | 5 ----- examples/host/msc_file_explorer/CMakeLists.txt | 5 ----- hw/bsp/family_support.cmake | 20 +++++++++++++------- hw/bsp/rp2040/family.cmake | 2 +- 7 files changed, 19 insertions(+), 33 deletions(-) (limited to 'examples/host') diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 1e34428fe..a16b8bd71 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -2,15 +2,15 @@ cmake_minimum_required(VERSION 3.17) include(${CMAKE_CURRENT_LIST_DIR}/../../../hw/bsp/family_support.cmake) +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + set(LWIP ${TOP}/lib/lwip) if (NOT EXISTS ${LWIP}/src) - MESSAGE(WARNING "lib/lwip submodule not found, please run 'python tools/get_deps.py lib/lwip' to fetch it") + family_example_missing_dependency(${PROJECT} "lib/lwip") return() endif() -# gets PROJECT name for the example (e.g. -) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 95af48718..7049fe66b 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -24,9 +24,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() +family_configure_host_example(${PROJECT} noos) \ No newline at end of file diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index 3fdc832ab..ad5751705 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -28,8 +28,3 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index d1d901b53..3fb630aaa 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -26,8 +26,3 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 99c797275..a35a7f0fb 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -38,8 +38,3 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT} noos) - -# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host -if(FAMILY STREQUAL "rp2040") - family_add_pico_pio_usb(${PROJECT}) -endif() diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index b2e61a824..9959784ae 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -1,4 +1,4 @@ -include_guard() +include_guard(GLOBAL) include(CMakePrintHelpers) @@ -36,12 +36,14 @@ if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") endif() -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () +if (NOT TINYUSB_OPT_SKIP_CHECK_IPO_SUPPORTED) + # enable LTO if supported + include(CheckIPOSupported) + check_ipo_supported(RESULT IPO_SUPPORTED) + if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) + endif() +endif() set(WARNING_FLAGS_GNU -Wall @@ -278,6 +280,10 @@ function(family_configure_dual_usb_example TARGET RTOS) family_configure_example(${TARGET} ${RTOS}) endfunction() +function(family_example_missing_dependency TARGET DEPENDENCY) + message(WARNING "${DEPENDENCY} submodule needed by ${TARGET} not found, please run 'python tools/get_deps.py ${DEPENDENCY}' to fetch it") +endfunction() + #---------------------------------- # RPI specific: refactor later #---------------------------------- diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index b986b3ebb..8b8014e8a 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -1,5 +1,5 @@ cmake_minimum_required(VERSION 3.13) -include_guard() +include_guard(GLOBAL) if (NOT BOARD) message("BOARD not specified, defaulting to pico_sdk") -- cgit v1.3.1 From 3f788a4e5a7758ce51cbcadef4ac21e427cc3c56 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 31 Jul 2023 19:09:40 +0700 Subject: enable USBMC for uno r4, add board_init_after_tusb() API add BOARD_UPPERCASE for board detection --- examples/device/audio_4_channel_mic/src/main.c | 4 ++++ examples/device/audio_test/src/main.c | 4 ++++ examples/device/audio_test_multi_rate/src/main.c | 4 ++++ examples/device/cdc_dual_ports/src/main.c | 4 ++++ examples/device/cdc_msc/src/main.c | 4 ++++ examples/device/cdc_msc_freertos/src/main.c | 4 ++++ examples/device/dfu/src/main.c | 4 ++++ examples/device/dfu_runtime/src/main.c | 4 ++++ examples/device/dynamic_configuration/src/main.c | 4 ++++ examples/device/hid_boot_interface/src/main.c | 4 ++++ examples/device/hid_composite/src/main.c | 4 ++++ examples/device/hid_composite_freertos/src/main.c | 4 ++++ examples/device/hid_generic_inout/src/main.c | 4 ++++ examples/device/hid_multiple_interface/src/main.c | 4 ++++ examples/device/midi_test/src/main.c | 4 ++++ examples/device/msc_dual_lun/src/main.c | 4 ++++ examples/device/net_lwip_webserver/src/main.c | 4 ++++ examples/device/uac2_headset/src/main.c | 4 ++++ examples/device/usbtmc/src/main.c | 4 ++++ examples/device/video_capture/src/main.c | 4 ++++ examples/device/webusb_serial/src/main.c | 4 ++++ examples/dual/host_hid_to_device_cdc/src/main.c | 4 ++++ examples/host/bare_api/src/main.c | 4 ++++ examples/host/cdc_msc_hid/src/main.c | 4 ++++ examples/host/hid_controller/src/main.c | 4 ++++ examples/host/msc_file_explorer/src/main.c | 5 +++++ examples/make.mk | 2 ++ hw/bsp/board.h | 3 +++ hw/bsp/family_support.cmake | 5 +++++ hw/bsp/ra/boards/uno_r4/board.mk | 2 +- hw/bsp/ra/family.c | 7 +++++++ src/portable/renesas/rusb2/dcd_rusb2.c | 2 -- 32 files changed, 123 insertions(+), 3 deletions(-) (limited to 'examples/host') diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 2b9c5143d..f5fc884bd 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -84,6 +84,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // Init values sampFreq = AUDIO_SAMPLE_RATE; clkValid = 1; diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index b5ca41d36..6dc655416 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -85,6 +85,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // Init values sampFreq = AUDIO_SAMPLE_RATE; clkValid = 1; diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 078e783eb..637be2d40 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -99,6 +99,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // Init values sampFreq = sampleRatesList[0]; clkValid = 1; diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 70eaea85d..7ceff73b3 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -42,6 +42,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 6dad73cbf..87fc33181 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -58,6 +58,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 0e8a24d02..6cfef9ef5 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -136,6 +136,10 @@ void usb_device_task(void* param) // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // RTOS forever loop while (1) { diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 5f37f25e1..bcd5b4942 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -77,6 +77,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 4ec3cb188..beef1037d 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -72,6 +72,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 578f01d8c..6c7789138 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -59,6 +59,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 1a155996a..47f68f8fa 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -59,6 +59,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 8d0e6bece..d4c5f5b3e 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -60,6 +60,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ca02af100..bdbe26b86 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -138,6 +138,10 @@ void usb_device_task(void* param) // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // RTOS forever loop while (1) { diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 5db8f5581..5b3e53b06 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -83,6 +83,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 72240b208..94f845a84 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -64,6 +64,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 2c3e9d954..c77207ca2 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -65,6 +65,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index c7f6de7bf..d8abb5151 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -57,6 +57,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 19a0eae9d..22543880e 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -232,6 +232,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + /* initialize lwip, dhcp-server, dns-server, and http */ init_lwip(); while (!netif_is_up(&netif_data)); diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 19a3f7bae..c502eb10d 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -105,6 +105,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + TU_LOG1("Headset running\r\n"); while (1) diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 2bba336f1..fa7de7570 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -57,6 +57,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 5654e0b61..b942dd30e 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -59,6 +59,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index eaca78c73..f63d0ccea 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -96,6 +96,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 817c63c70..5a31b9dda 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -83,6 +83,10 @@ int main(void) tud_init(BOARD_TUD_RHPORT); tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index bb7fa850e..7286befe0 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -67,6 +67,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 1f4acb822..51251be5c 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -48,6 +48,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 4dcc92587..a4ab2f711 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -54,6 +54,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 7b1c2ef27..fc4b4e669 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -80,6 +80,11 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + msc_app_init(); while (1) diff --git a/examples/make.mk b/examples/make.mk index 3c3a920cc..4001a5359 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -116,6 +116,8 @@ INC += \ $(TOP)/$(FAMILY_PATH) \ $(TOP)/src \ +BOARD_UPPER = $(shell echo $(BOARD) | tr a-z A-Z) +CFLAGS += -DBOARD_$(BOARD_UPPER) # Log level is mapped to TUSB DEBUG option ifneq ($(LOG),) diff --git a/hw/bsp/board.h b/hw/bsp/board.h index 036556731..d782013bb 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -54,6 +54,9 @@ // Initialize on-board peripherals : led, button, uart and USB void board_init(void); +// Init board after tinyusb is initialized +void board_init_after_tusb(void) TU_ATTR_WEAK; + // Turn LED on or off void board_led_write(bool state); diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d8298c8ad..db1ce988e 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -181,6 +181,11 @@ endfunction() function(family_configure_common TARGET RTOS) family_add_rtos(${TARGET} ${RTOS}) + string(TOUPPER ${BOARD} BOARD_UPPER) + target_compile_definitions(${TARGET} PUBLIC + BOARD_${BOARD_UPPER} + ) + # run size after build add_custom_command(TARGET ${TARGET} POST_BUILD COMMAND ${CMAKE_SIZE} $ diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk index cbe6c782c..b7075eec0 100644 --- a/hw/bsp/ra/boards/uno_r4/board.mk +++ b/hw/bsp/ra/boards/uno_r4/board.mk @@ -1,7 +1,7 @@ CPU_CORE = cortex-m4 MCU_VARIANT = ra4m1 -LD_FILE = $(BOARD_PATH)/${BOARD}.ld +LD_FILE = ${BOARD_PATH}/${BOARD}.ld # For flash-jlink target JLINK_DEVICE = R7FA4M1AB diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 096f0d0ff..e6213061d 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -124,6 +124,13 @@ void board_init(void) { board_led_write(false); } +void board_init_after_tusb(void) { + // For board that use USB LDO regulator +#if defined(BOARD_UNO_R4) + R_USB_FS0->USBMC |= R_USB_FS0_USBMC_VDCEN_Msk; +#endif +} + void board_led_write(bool state) { R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); } diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 37fd93497..9a3983f56 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -726,8 +726,6 @@ void dcd_init(uint8_t rhport) rusb->PHYSLEW = 0x5; rusb->DPUSR0R_FS_b.FIXPHY0 = 0u; /* USB_BASE Transceiver Output fixed */ - - // rusb2->USBMC = (uint16_t) (rusb2->USBMC | RUSB2_USBMC_VDCEN_Msk); } /* Setup default control pipe */ -- cgit v1.3.1 From 2021c6299789a3dd9bd239941d9316494205fe2f Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Aug 2023 17:57:28 +0700 Subject: fix pre-commit, also skip lto for rp2040 --- examples/host/bare_api/CMakeLists.txt | 2 +- hw/bsp/family_support.cmake | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'examples/host') diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 7049fe66b..05398b079 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -24,4 +24,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT} noos) \ No newline at end of file +family_configure_host_example(${PROJECT} noos) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 9959784ae..7c230957c 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -36,8 +36,8 @@ if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") endif() -if (NOT TINYUSB_OPT_SKIP_CHECK_IPO_SUPPORTED) - # enable LTO if supported +if (NOT FAMILY STREQUAL rp2040) + # enable LTO if supported skip rp2040 include(CheckIPOSupported) check_ipo_supported(RESULT IPO_SUPPORTED) if (IPO_SUPPORTED) -- cgit v1.3.1 From cf91660cee0863291fd9412a3623df018e8bd071 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 15:44:05 +0700 Subject: rename hw/bsp/board.h to board_api.h --- examples/device/audio_4_channel_mic/src/main.c | 2 +- examples/device/audio_test/src/main.c | 2 +- examples/device/audio_test_multi_rate/src/main.c | 2 +- examples/device/board_test/src/main.c | 2 +- examples/device/cdc_dual_ports/src/main.c | 2 +- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_msc/src/msc_disk.c | 2 +- examples/device/cdc_msc_freertos/src/main.c | 2 +- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 +- examples/device/cdc_uac2/src/cdc_app.c | 2 +- examples/device/cdc_uac2/src/main.c | 2 +- examples/device/cdc_uac2/src/uac2_app.c | 2 +- examples/device/dfu/src/main.c | 2 +- examples/device/dfu_runtime/src/main.c | 2 +- examples/device/dynamic_configuration/src/main.c | 2 +- .../device/dynamic_configuration/src/msc_disk.c | 2 +- .../dynamic_configuration/src/usb_descriptors.c | 2 +- examples/device/hid_composite/src/main.c | 2 +- examples/device/hid_composite_freertos/src/main.c | 2 +- examples/device/hid_generic_inout/src/main.c | 2 +- examples/device/hid_multiple_interface/src/main.c | 2 +- examples/device/midi_test/src/main.c | 2 +- examples/device/msc_dual_lun/src/main.c | 2 +- examples/device/msc_dual_lun/src/msc_disk_dual.c | 2 +- examples/device/net_lwip_webserver/src/main.c | 2 +- examples/device/uac2_headset/src/main.c | 2 +- examples/device/usbtmc/src/main.c | 2 +- examples/device/usbtmc/src/usbtmc_app.c | 2 +- examples/device/video_capture/src/main.c | 2 +- examples/device/webusb_serial/src/main.c | 2 +- examples/dual/host_hid_to_device_cdc/src/main.c | 2 +- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid/src/hid_app.c | 2 +- examples/host/cdc_msc_hid/src/main.c | 2 +- examples/host/hid_controller/src/hid_app.c | 2 +- examples/host/hid_controller/src/main.c | 2 +- examples/host/msc_file_explorer/src/main.c | 2 +- examples/host/msc_file_explorer/src/msc_app.c | 2 +- hw/bsp/board.c | 2 +- hw/bsp/board.h | 144 --------------------- hw/bsp/board_api.h | 137 ++++++++++++++++++++ hw/bsp/ea4357/ea4357.c | 2 +- hw/bsp/fomu/fomu.c | 2 +- hw/bsp/gd32vf103/family.c | 2 +- hw/bsp/ngx4330/ngx4330.c | 2 +- hw/bsp/rp2040/family.c | 2 +- hw/bsp/sltb009a/sltb009a.c | 2 +- hw/bsp/stm32l4/family.c | 2 +- 49 files changed, 184 insertions(+), 191 deletions(-) delete mode 100644 hw/bsp/board.h create mode 100644 hw/bsp/board_api.h (limited to 'examples/host') diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 2b9c5143d..0336f0ef0 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -35,7 +35,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index b5ca41d36..9910b496f 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -35,7 +35,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 078e783eb..9715ff761 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -36,7 +36,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/board_test/src/main.c b/examples/device/board_test/src/main.c index b11f6f2bb..0a134a2e6 100644 --- a/examples/device/board_test/src/main.c +++ b/examples/device/board_test/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPES diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 70eaea85d..5645a953c 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -28,7 +28,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //------------- prototypes -------------// diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 6dad73cbf..fa303e061 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index f8f37a577..d2f8628f1 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 0e8a24d02..fa26771d5 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 707c8d578..9520dfec1 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/cdc_uac2/src/cdc_app.c b/examples/device/cdc_uac2/src/cdc_app.c index a95f638d9..2166c1d6b 100644 --- a/examples/device/cdc_uac2/src/cdc_app.c +++ b/examples/device/cdc_uac2/src/cdc_app.c @@ -24,7 +24,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "common.h" diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index 68352338e..7afa96c1a 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -28,7 +28,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "common.h" diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index 33dc33122..98659ea68 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" #include "common.h" diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 5f37f25e1..ab9697a87 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -42,7 +42,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 4ec3cb188..85b51449e 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -40,7 +40,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 578f01d8c..4e80ef9c4 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index 27856a1a4..10c3ac6fe 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 71348abef..039c7636c 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -24,7 +24,7 @@ */ #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 8d0e6bece..94e43df17 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ca02af100..1241f8edb 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 5db8f5581..55d6bbf21 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" /* This example demonstrate HID Generic raw Input & Output. diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 72240b208..dc5d3d7cc 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 2c3e9d954..734a0dae4 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" /* This MIDI example send sequence of note (on/off) repeatedly. To test on PC, you need to install diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index c7f6de7bf..38b658332 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index b1047acdb..4f0f6410f 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #if CFG_TUD_MSC diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 19a0eae9d..2e432232e 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -43,7 +43,7 @@ The smartphone may be artificially picky about which Ethernet MAC address to rec try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00 (clearing bit 1). */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "dhserver.h" diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 19a3f7bae..245370bb3 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -26,7 +26,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 2bba336f1..71f352905 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usbtmc_app.h" //--------------------------------------------------------------------+ diff --git a/examples/device/usbtmc/src/usbtmc_app.c b/examples/device/usbtmc/src/usbtmc_app.c index 72989b4fe..fb25982c7 100644 --- a/examples/device/usbtmc/src/usbtmc_app.c +++ b/examples/device/usbtmc/src/usbtmc_app.c @@ -26,7 +26,7 @@ #include #include /* atoi */ #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "main.h" #if (CFG_TUD_USBTMC_ENABLE_488) diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 5654e0b61..589fc448c 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index eaca78c73..675c593dd 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -47,7 +47,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 817c63c70..74f0a2a41 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -30,7 +30,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index bb7fa850e..a50fd33b5 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -32,7 +32,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" // English diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index 7769d109e..a1b26e49c 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -25,7 +25,7 @@ */ #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 87e110ab2..7727ee62c 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 1f4acb822..3d2567849 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/hid_controller/src/hid_app.c b/examples/host/hid_controller/src/hid_app.c index 76de97b41..bff830ca2 100644 --- a/examples/host/hid_controller/src/hid_app.c +++ b/examples/host/hid_controller/src/hid_app.c @@ -23,7 +23,7 @@ * */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" /* From https://www.kernel.org/doc/html/latest/input/gamepad.html diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 4dcc92587..f4f6bda28 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -32,7 +32,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 7b1c2ef27..ced6e01a9 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -59,7 +59,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index 003e2865b..323dfb9e7 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -25,7 +25,7 @@ #include #include "tusb.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "ff.h" #include "diskio.h" diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 7804a18e0..417630a03 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -23,7 +23,7 @@ * */ -#include "board.h" +#include "board_api.h" //--------------------------------------------------------------------+ // newlib read()/write() retarget diff --git a/hw/bsp/board.h b/hw/bsp/board.h deleted file mode 100644 index 036556731..000000000 --- a/hw/bsp/board.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/** \ingroup group_demo - * \defgroup group_board Boards Abstraction Layer - * @{ */ - -#ifndef _BSP_BOARD_H_ -#define _BSP_BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#include -#include - -#include "ansi_escape.h" -#include "tusb.h" - -// Define the default baudrate -#ifndef CFG_BOARD_UART_BAUDRATE -#define CFG_BOARD_UART_BAUDRATE 115200 ///< Default baud rate -#endif - -//--------------------------------------------------------------------+ -// Board Porting API -// For simplicity, only one LED and one Button are used -//--------------------------------------------------------------------+ - -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void); - -// Turn LED on or off -void board_led_write(bool state); - -// Control led pattern using phase duration in ms. -// For each phase, LED is toggle then repeated, board_led_task() is required to be called -//void board_led_pattern(uint32_t const phase_ms[], uint8_t count); - -// Get the current state of button -// a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void); - -// Get characters from UART -// Return number of read bytes -int board_uart_read(uint8_t* buf, int len); - -// Send characters to UART -// Return number of sent bytes -int board_uart_write(void const * buf, int len); - -#if CFG_TUSB_OS == OPT_OS_NONE - // Get current milliseconds, must be implemented when no RTOS is used - uint32_t board_millis(void); - -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - static inline uint32_t board_millis(void) - { - return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); - } - -#elif CFG_TUSB_OS == OPT_OS_MYNEWT - static inline uint32_t board_millis(void) - { - return os_time_ticks_to_ms32( os_time_get() ); - } - -#elif CFG_TUSB_OS == OPT_OS_PICO - #include "pico/time.h" - static inline uint32_t board_millis(void) - { - return to_ms_since_boot(get_absolute_time()); - } - -#elif CFG_TUSB_OS == OPT_OS_RTTHREAD - static inline uint32_t board_millis(void) - { - return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); - } - -#else - #error "board_millis() is not implemented for this OS" -#endif - -//--------------------------------------------------------------------+ -// Helper functions -//--------------------------------------------------------------------+ -static inline void board_led_on(void) -{ - board_led_write(true); -} - -static inline void board_led_off(void) -{ - board_led_write(false); -} - -// TODO remove -static inline void board_delay(uint32_t ms) -{ - uint32_t start_ms = board_millis(); - while (board_millis() - start_ms < ms) - { - #if CFG_TUD_ENABLED - // take chance to run usb background - tud_task(); - #endif - } -} - -// stdio getchar() is blocking, this is non-blocking version -int board_getchar(void); - -#ifdef __cplusplus - } -#endif - -#endif /* _BSP_BOARD_H_ */ - -/** @} */ diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h new file mode 100644 index 000000000..32b10d06b --- /dev/null +++ b/hw/bsp/board_api.h @@ -0,0 +1,137 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BSP_BOARD_H_ +#define _BSP_BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#include +#include + +#include "tusb.h" + +// Define the default baudrate +#ifndef CFG_BOARD_UART_BAUDRATE +#define CFG_BOARD_UART_BAUDRATE 115200 ///< Default baud rate +#endif + +//--------------------------------------------------------------------+ +// Board Porting API +// For simplicity, only one LED and one Button are used +//--------------------------------------------------------------------+ + +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void); + +// Turn LED on or off +void board_led_write(bool state); + +// Control led pattern using phase duration in ms. +// For each phase, LED is toggle then repeated, board_led_task() is required to be called +//void board_led_pattern(uint32_t const phase_ms[], uint8_t count); + +// Get the current state of button +// a '1' means active (pressed), a '0' means inactive. +uint32_t board_button_read(void); + +// Get characters from UART +// Return number of read bytes +int board_uart_read(uint8_t* buf, int len); + +// Send characters to UART +// Return number of sent bytes +int board_uart_write(void const * buf, int len); + +#if CFG_TUSB_OS == OPT_OS_NONE + // Get current milliseconds, must be implemented when no RTOS is used + uint32_t board_millis(void); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + static inline uint32_t board_millis(void) + { + return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); + } + +#elif CFG_TUSB_OS == OPT_OS_MYNEWT + static inline uint32_t board_millis(void) + { + return os_time_ticks_to_ms32( os_time_get() ); + } + +#elif CFG_TUSB_OS == OPT_OS_PICO + #include "pico/time.h" + static inline uint32_t board_millis(void) + { + return to_ms_since_boot(get_absolute_time()); + } + +#elif CFG_TUSB_OS == OPT_OS_RTTHREAD + static inline uint32_t board_millis(void) + { + return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); + } + +#else + #error "board_millis() is not implemented for this OS" +#endif + +//--------------------------------------------------------------------+ +// Helper functions +//--------------------------------------------------------------------+ +static inline void board_led_on(void) +{ + board_led_write(true); +} + +static inline void board_led_off(void) +{ + board_led_write(false); +} + +// TODO remove +static inline void board_delay(uint32_t ms) +{ + uint32_t start_ms = board_millis(); + while (board_millis() - start_ms < ms) + { + #if CFG_TUD_ENABLED + // take chance to run usb background + tud_task(); + #endif + } +} + +// stdio getchar() is blocking, this is non-blocking version +int board_getchar(void); + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index 68bcaa123..06975b8cc 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "../board.h" +#include "../board_api.h" #include "pca9532.h" #define UART_DEV LPC_USART0 diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c index e079e7c5b..d155b743d 100644 --- a/hw/bsp/fomu/fomu.c +++ b/hw/bsp/fomu/fomu.c @@ -26,7 +26,7 @@ #include #include -#include "../board.h" +#include "../board_api.h" #include "csr.h" #include "irq.h" diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 113c4c304..27d7e87bb 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -28,7 +28,7 @@ #include "drv_usb_hw.h" #include "drv_usb_dev.h" -#include "../board.h" +#include "../board_api.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index d61f775c7..a767d5f29 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "../board.h" +#include "../board_api.h" #define LED_PORT 1 #define LED_PIN 12 diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 40e3f11cd..be5e9f753 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -32,7 +32,7 @@ #include "hardware/structs/ioqspi.h" #include "hardware/structs/sio.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB diff --git a/hw/bsp/sltb009a/sltb009a.c b/hw/bsp/sltb009a/sltb009a.c index 2a5d112a8..23ef6d7cd 100644 --- a/hw/bsp/sltb009a/sltb009a.c +++ b/hw/bsp/sltb009a/sltb009a.c @@ -25,7 +25,7 @@ * This file is part of the TinyUSB stack. */ -#include "../board.h" +#include "../board_api.h" #include "em_device.h" diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index d661613af..0b2c22d19 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -27,7 +27,7 @@ */ #include "stm32l4xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ -- cgit v1.3.1 From 088180e3d86cc51472dcd06ae42c613b534bf71c Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 14 Aug 2023 20:58:00 +0700 Subject: add iar support for lpc43, add lpcxpresso43s67 to hil farm --- .github/workflows/build_iar.yml | 81 +------------------------- examples/host/msc_file_explorer/CMakeLists.txt | 12 ++-- hw/bsp/lpc43/family.c | 18 +++++- hw/bsp/lpc43/family.cmake | 75 +++++++++++++----------- test/hil/hil_hfp.json | 7 +++ tools/get_deps.py | 2 +- 6 files changed, 71 insertions(+), 124 deletions(-) (limited to 'examples/host') diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 48fdd6a8a..1eacf90c9 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -32,7 +32,7 @@ jobs: # Alphabetical order # Note: bundle multiple families into a matrix since there is only one self-hosted instance can # run IAR build. Too many matrix can hurt due to setup/teardown overhead. - - 'stm32f0 stm32f1 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4' + - 'lpc43 stm32f0 stm32f1 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4' steps: - name: Clean workspace run: | @@ -52,82 +52,3 @@ jobs: - name: Test on actual hardware (hardware in the loop) run: | python3 test/hil/hil_test.py hil_hfp.json - -# # Upload binaries for hardware test with self-hosted -# - name: Prepare stm32l412nucleo Artifacts -# if: contains(matrix.family, 'stm32l4') -# working-directory: ${{github.workspace}}/cmake-build/cmake-build-stm32l412nucleo -# run: | -# find device/ -name "*.elf" -exec mv {} ../../ \; -# -# - name: Upload Artifacts for stm32l412nucleo -# if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach' -# uses: actions/upload-artifact@v3 -# with: -# name: stm32l4 -# path: | -# *.elf - - # --------------------------------------- - # Hardware in the loop (HIL) - # Current self-hosted instance is running on an EPYC 7232 server hosted by HiFiPhile user - # --------------------------------------- -# hw-stm32l412nucleo-test: -# needs: cmake -# runs-on: [self-hosted, Linux, X64, hifiphile] -# -# steps: -# - name: Clean workspace -# run: | -# echo "Cleaning up previous run" -# rm -rf "${{ github.workspace }}" -# mkdir -p "${{ github.workspace }}" -# -# - name: Download stm32l4 Artifacts -# uses: actions/download-artifact@v3 -# with: -# name: stm32l4 -# -# - name: Create flash.sh -# run: | -# echo > flash.sh 'echo halt > flash.jlink' -# echo >> flash.sh 'echo r >> flash.jlink' -# echo >> flash.sh 'echo loadfile $1 >> flash.jlink' -# echo >> flash.sh 'echo r >> flash.jlink' -# echo >> flash.sh 'echo go >> flash.jlink' -# echo >> flash.sh 'echo exit >> flash.jlink' -# echo >> flash.sh 'cmdout=$(JLinkExe -USB 774470029 -device stm32l412kb -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink)' -# echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi' -# chmod +x flash.sh -# -# - name: Test cdc_dual_ports -# run: | -# ./flash.sh cdc_dual_ports.elf -# while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 10 ]; do :; done -# test -e /dev/ttyACM1 && echo "ttyACM1 exists" -# test -e /dev/ttyACM2 && echo "ttyACM2 exists" -# -# # Debian does not auto mount usb drive. skip this test for now -# - name: Test cdc_msc -# if: false -# run: | -# ./flash.sh cdc_msc.elf -# readme='/media/pi/TinyUSB MSC/README.TXT' -# while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 10 ]; do :; done -# test -e /dev/ttyACM1 && echo "ttyACM1 exists" -# test -f "$readme" && echo "$readme exists" -# cat "$readme" -# -# - name: Test dfu -# run: | -# ./flash.sh dfu.elf -# while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 10 ]; do :; done -# dfu-util -d cafe -a 0 -U dfu0 -# dfu-util -d cafe -a 1 -U dfu1 -# grep "TinyUSB DFU! - Partition 0" dfu0 -# grep "TinyUSB DFU! - Partition 1" dfu1 -# -# - name: Test dfu_runtime -# run: | -# ./flash.sh dfu_runtime.elf -# while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 10 ]; do :; done diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index a35a7f0fb..1868b632e 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -22,11 +22,13 @@ target_sources(${PROJECT} PUBLIC ) # Suppress warnings on fatfs -set_source_files_properties( - ${TOP}/lib/fatfs/source/ff.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual" -) +if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + set_source_files_properties( + ${TOP}/lib/fatfs/source/ff.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual" + ) +endif () # Example include target_include_directories(${PROJECT} PUBLIC diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c index 8d80bf951..d52c1a071 100644 --- a/hw/bsp/lpc43/family.c +++ b/hw/bsp/lpc43/family.c @@ -63,13 +63,25 @@ const uint32_t ExtRateIn = 0; void SystemInit(void) { #ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + +#ifdef __ICCARM__ + extern void *__vector_table; + *pSCB_VTOR = (unsigned int) &__vector_table; + +#elif defined(__ARMCC_VERSION) + extern void *__Vectors; + *pSCB_VTOR = (unsigned int) &__Vectors; + +#else // other compoiler using cr_startup_lpc43xx.c + extern void (* const g_pfnVectors[])(void); *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif - #if __FPU_USED == 1 +#if __FPU_USED == 1 fpuInit(); - #endif +#endif + #endif /* Setup system level pin muxing */ diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index e79004686..608fc4ca3 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -17,43 +17,48 @@ set(FAMILY_MCUS LPC43XX CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c - ${SDK_DIR}/src/chip_18xx_43xx.c - ${SDK_DIR}/src/clock_18xx_43xx.c - ${SDK_DIR}/src/fpu_init.c - ${SDK_DIR}/src/gpio_18xx_43xx.c - ${SDK_DIR}/src/iap_18xx_43xx.c - ${SDK_DIR}/src/sysinit_18xx_43xx.c - ${SDK_DIR}/src/uart_18xx_43xx.c - ) - target_compile_options(${BOARD_TARGET} PUBLIC - -nostdlib - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - __USE_LPCOPEN - CORE_M4 + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # Startup & Linker script + set(STARTUP_FILE_GNU ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c) + set(STARTUP_FILE_IAR ${SDK_DIR}/../iar/iar_startup_lpc18xx43xx.s) + set(LD_FILE_IAR ${SDK_DIR}/../iar/linker/lpc18xx_43xx_ldscript_iflash.icf) + + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ${SDK_DIR}/src/chip_18xx_43xx.c + ${SDK_DIR}/src/clock_18xx_43xx.c + ${SDK_DIR}/src/fpu_init.c + ${SDK_DIR}/src/gpio_18xx_43xx.c + ${SDK_DIR}/src/iap_18xx_43xx.c + ${SDK_DIR}/src/sysinit_18xx_43xx.c + ${SDK_DIR}/src/uart_18xx_43xx.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __USE_LPCOPEN + CORE_M4 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/inc + ${SDK_DIR}/inc/config_43xx + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC -nostdlib) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/inc - ${SDK_DIR}/inc/config_43xx + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/test/hil/hil_hfp.json b/test/hil/hil_hfp.json index 7912af245..58f550901 100644 --- a/test/hil/hil_hfp.json +++ b/test/hil/hil_hfp.json @@ -13,6 +13,13 @@ "debugger": "jlink", "debugger_sn": "770935966", "cpu": "STM32F746NG" + }, + { + "name": "lpcxpresso43s67", + "uid": "08F000044528BAAA8D858F58C50700F5", + "debugger": "jlink", + "debugger_sn": "728973776", + "cpu": "LPC43S67_M4" } ] } diff --git a/tools/get_deps.py b/tools/get_deps.py index 82f756f64..1fac291a3 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -48,7 +48,7 @@ deps_optional = { '2204191ec76283371419fbcec207da02e1bc22fa', 'nuc'], 'hw/mcu/nxp/lpcopen': ['https://github.com/hathach/nxp_lpcopen.git', - '43c45c85405a5dd114fff0ea95cca62837740c13', + '84e0bd3e43910aaf71eefd62075cf57495418312', 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '950819b7de9b32f92c3edf396bc5ffb8d66e7009', -- cgit v1.3.1 From f2f005cbdf33dd0e10617535bcf7c0b24d6762b0 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 14 Aug 2023 22:01:30 +0700 Subject: fix build iar with lpc43 --- examples/host/cdc_msc_hid/src/hid_app.c | 2 ++ examples/host/msc_file_explorer/src/msc_app.c | 3 +++ 2 files changed, 5 insertions(+) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index 7727ee62c..f0d42a08f 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -160,7 +160,9 @@ static void process_kbd_report(hid_keyboard_report_t const *report) putchar(ch); if ( ch == '\r' ) putchar('\n'); // added new line for enter key + #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? fflush(stdout); // flush right away, else nanolib will wait for newline + #endif } } // TODO example skips key released diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index 323dfb9e7..ecea614a2 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -66,7 +66,10 @@ bool msc_app_init(void) for(size_t i=0; i Date: Sun, 27 Aug 2023 23:45:34 +0700 Subject: more update to transaction --- examples/host/cdc_msc_hid/src/tusb_config.h | 9 ++-- examples/host/msc_file_explorer/src/tusb_config.h | 10 +++-- src/common/tusb_mcu.h | 12 ++++++ src/host/hcd.h | 4 +- src/host/usbh.c | 1 + src/portable/analog/max3421/hcd_max3421.c | 51 +++++++++++++++-------- 6 files changed, 62 insertions(+), 25 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index abb75f068..7d621d466 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -35,9 +35,12 @@ //--------------------------------------------------------------------+ #if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB + // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 + #define CFG_TUH_RPI_PIO_USB 0 + #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB +#elif CFG_TUSB_MCU == OPT_MCU_NRF5X + // Use external USB controller (via SPI) MAX3421E (aka usb host shield) + #define CFG_TUH_MAX3421 1 #endif // RHPort number used for host can be defined by board.mk, default to port 0 diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index 1e0d067bf..bb2fd4cf5 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -35,11 +35,15 @@ //--------------------------------------------------------------------+ #if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB + // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 + #define CFG_TUH_RPI_PIO_USB 0 + #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_US +#elif CFG_TUSB_MCU == OPT_MCU_NRF5X + // Use external USB controller (via SPI) MAX3421E (aka usb host shield) + #define CFG_TUH_MAX3421 1 #endif + // RHPort number used for host can be defined by board.mk, default to port 0 #ifndef BOARD_TUH_RHPORT #define BOARD_TUH_RHPORT 0 diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 35f94efbc..21939df7c 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -385,6 +385,18 @@ #define TUP_RHPORT_HIGHSPEED 1 #endif + +//--------------------------------------------------------------------+ +// External USB controller +//--------------------------------------------------------------------+ + +#if defined(CFG_TUH_MAX3421) & CFG_TUH_MAX3421 + #ifndef CFG_TUH_MAX3421_ENDPOINT_TOTAL + #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4*(CFG_TUH_DEVICE_MAX-1)) + #endif +#endif + + //--------------------------------------------------------------------+ // Default Values //--------------------------------------------------------------------+ diff --git a/src/host/hcd.h b/src/host/hcd.h index 1f01a1a2f..e25b20ea3 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -39,7 +39,7 @@ // Configuration //--------------------------------------------------------------------+ -// Max number of endpoints per device +// Max number of endpoints pair per device // TODO optimize memory usage #ifndef CFG_TUH_ENDPOINT_MAX #define CFG_TUH_ENDPOINT_MAX 16 @@ -167,7 +167,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); //--------------------------------------------------------------------+ // Open an endpoint -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); +bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); diff --git a/src/host/usbh.c b/src/host/usbh.c index 7a09f5b6e..12a7f5839 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -919,6 +919,7 @@ TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) switch (event->event_id) { // case HCD_EVENT_DEVICE_REMOVE: +// // FIXME device remove from a hub need an HCD API for hcd to free up endpoint // // mark device as removing to prevent further xfer before the event is processed in usbh task // break; diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index e546f99ce..574cca788 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -582,6 +582,7 @@ void xact_out(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { } uint8_t const xact_len = (uint8_t) tu_min16(ep->total_len - ep->xferred_len, ep->packet_size); + TU_ASSERT(_hcd_data.hirq & HIRQ_SNDBAV_IRQ, ); fifo_write(rhport, SNDFIFO_ADDR, ep->buf, xact_len, in_isr); sndbc_write(rhport, xact_len, in_isr); @@ -602,6 +603,28 @@ void xact_in(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { hxfr_write(rhport, hxfr, in_isr); } +TU_ATTR_ALWAYS_INLINE static inline void xact_inout(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { + if (ep->ep_dir) { + xact_in(rhport, ep, switch_ep, in_isr); + }else { + xact_out(rhport, ep, switch_ep, in_isr); + } +} + +void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t result, uint8_t data_toggle) { + (void) rhport; + (void) result; + ep->xfer_pending = 0; + ep->data_toggle = data_toggle; + //uint8_t const ep_addr = tu_edpt_addr(ep->ep_num, ep->ep_dir); + //hcd_event_xfer_complete(rhport, ep_addr, ep->xferred_len, result, true); + +// max3421_ep_t *next_ep = find_next_pending_ep(ep); +// if (next_ep) { +// xact_inout(rhport, next_ep, true, true); +// } +} + // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { (void) rhport; @@ -612,6 +635,9 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buf max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir); TU_ASSERT(ep); + // control transfer can switch direction + ep->ep_dir = ep_dir; + ep->buf = buffer; ep->total_len = buflen; ep->xferred_len = 0; @@ -636,12 +662,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buf } } - if ( 0 == ep_dir ) { - TU_ASSERT(_hcd_data.hirq & HIRQ_SNDBAV_IRQ); - xact_out(rhport, ep, true, false); - } else { - xact_in(rhport, ep, true, false); - } + xact_inout(rhport, ep, true, false); } return true; @@ -662,6 +683,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8] (void) rhport; max3421_ep_t* ep = find_opened_ep(daddr, 0, 0); + ep->ep_dir = 0; ep->total_len = 8; ep->xferred_len = 0; @@ -715,18 +737,13 @@ static void handle_xfer_done(uint8_t rhport) { }else { // NAK on non-control, find next pending to switch max3421_ep_t *next_ep = find_next_pending_ep(ep); - TU_ASSERT(next_ep, ); if (ep == next_ep) { // only one pending, retry immediately hxfr_write(rhport, _hcd_data.hxfr, true); - }else { + }else if (next_ep) { // switch to next pending TODO could have issue with double buffered if not clear previously out data - if ( ep_dir ) { - xact_in(rhport, next_ep, true, true); - } else { - xact_out(rhport, next_ep, true, true); - } + xact_inout(rhport, next_ep, true, true); } } return; @@ -744,8 +761,8 @@ static void handle_xfer_done(uint8_t rhport) { // short packet or all bytes transferred if ( ep->xfer_complete ) { - // save data toggle - ep->data_toggle = (hrsl & HRSL_RCVTOGRD) ? 1 : 0; + uint8_t const dt = (hrsl & HRSL_RCVTOGRD) ? 1 : 0; // save data toggle + xfer_complete_isr(rhport, ep, xfer_result, dt); hcd_event_xfer_complete(_hcd_data.peraddr, TUSB_DIR_IN_MASK | ep_num, ep->xferred_len, xfer_result, true); }else { // more to transfer @@ -767,8 +784,8 @@ static void handle_xfer_done(uint8_t rhport) { ep->buf += xact_len; if (xact_len < ep->packet_size || ep->xferred_len >= ep->total_len) { - // save data toggle - ep->data_toggle = (hrsl & HRSL_SNDTOGRD) ? 1 : 0; + uint8_t const dt = (hrsl & HRSL_SNDTOGRD) ? 1 : 0; // save data toggle + xfer_complete_isr(rhport, ep, xfer_result, dt); hcd_event_xfer_complete(_hcd_data.peraddr, ep_num, ep->xferred_len, xfer_result, true); } else { xact_out(rhport, ep, false, true); -- cgit v1.3.1 From 84df3b04db47d34b53ef002b056b6b324394de52 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 27 Aug 2023 23:54:24 +0700 Subject: minor update --- .idea/cmake.xml | 5 +++-- .idea/runConfigurations/nrf52840.xml | 2 +- examples/host/cdc_msc_hid/src/tusb_config.h | 6 +++--- examples/host/msc_file_explorer/src/tusb_config.h | 6 +++--- 4 files changed, 10 insertions(+), 9 deletions(-) (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 8ee7f09a0..86e7c6606 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -30,9 +30,10 @@ - - + + + diff --git a/.idea/runConfigurations/nrf52840.xml b/.idea/runConfigurations/nrf52840.xml index 084669c39..2f3f1876a 100644 --- a/.idea/runConfigurations/nrf52840.xml +++ b/.idea/runConfigurations/nrf52840.xml @@ -1,5 +1,5 @@ - + diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 7d621d466..8d3ef8891 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -38,9 +38,9 @@ // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 #define CFG_TUH_RPI_PIO_USB 0 #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#elif CFG_TUSB_MCU == OPT_MCU_NRF5X - // Use external USB controller (via SPI) MAX3421E (aka usb host shield) - #define CFG_TUH_MAX3421 1 +//#elif CFG_TUSB_MCU == OPT_MCU_NRF5X +// // Use external USB controller (via SPI) MAX3421E (aka usb host shield) +// #define CFG_TUH_MAX3421 1 #endif // RHPort number used for host can be defined by board.mk, default to port 0 diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index bb2fd4cf5..28e130c0e 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -38,9 +38,9 @@ // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 #define CFG_TUH_RPI_PIO_USB 0 #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_US -#elif CFG_TUSB_MCU == OPT_MCU_NRF5X - // Use external USB controller (via SPI) MAX3421E (aka usb host shield) - #define CFG_TUH_MAX3421 1 +//#elif CFG_TUSB_MCU == OPT_MCU_NRF5X +// // Use external USB controller (via SPI) MAX3421E (aka usb host shield) +// #define CFG_TUH_MAX3421 1 #endif -- cgit v1.3.1 From 41493426b38c8ce44b1f7720b907538bc5402f98 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 30 Aug 2023 16:21:43 +0700 Subject: use ep buf to keep setup packet, work well with hid device --- examples/host/msc_file_explorer/src/tusb_config.h | 2 +- src/portable/analog/max3421/hcd_max3421.c | 7 ++++--- 2 files changed, 5 insertions(+), 4 deletions(-) (limited to 'examples/host') diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index 28e130c0e..e6186ba46 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -37,7 +37,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 #define CFG_TUH_RPI_PIO_USB 0 - #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_US + #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB //#elif CFG_TUSB_MCU == OPT_MCU_NRF5X // // Use external USB controller (via SPI) MAX3421E (aka usb host shield) // #define CFG_TUH_MAX3421 1 diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 705bb5bfd..d644390da 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -633,6 +633,7 @@ TU_ATTR_ALWAYS_INLINE static inline void xact_inout(uint8_t rhport, max3421_ep_t // setup if (ep->is_setup) { peraddr_write(rhport, ep->daddr, in_isr); + fifo_write(rhport, SUDFIFO_ADDR, ep->buf, 8, in_isr); hxfr_write(rhport, HXFR_SETUP, in_isr); return; } @@ -703,12 +704,12 @@ bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8] TU_ASSERT(ep); ep->ep_dir = 0; + ep->is_setup = 1; + ep->buf = (uint8_t*)(uintptr_t) setup_packet; ep->total_len = 8; ep->xferred_len = 0; + ep->xfer_complete = 0; ep->xfer_pending = 1; - ep->is_setup = 1; - - fifo_write(rhport, SUDFIFO_ADDR, setup_packet, 8, false); // carry out transfer if not busy if ( !atomic_flag_test_and_set(&_hcd_data.busy) ) { -- cgit v1.3.1 From ab9585401b9964407cbf2bc7bffdf762353817f9 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Sep 2023 11:35:51 +0700 Subject: wrap up build cmake & make support for max3421, to enable the Host driver, 'MAX3421_HOST=1' must be added as part of make/cmake command --- .idea/cmake.xml | 6 ++--- .idea/runConfigurations/kl25.xml | 2 +- .idea/runConfigurations/lpc1857.xml | 2 +- .idea/runConfigurations/lpc4088.xml | 2 +- .idea/runConfigurations/lpc54628.xml | 10 +++++++ .idea/runConfigurations/lpc55s69.xml | 10 +++++++ .idea/runConfigurations/mcx947.xml | 2 +- .idea/runConfigurations/nrf52840.xml | 2 +- .idea/runConfigurations/nrf5340.xml | 2 +- .idea/runConfigurations/ra4m1.xml | 2 +- .idea/runConfigurations/ra6m1.xml | 2 +- .idea/runConfigurations/ra6m5.xml | 2 +- .idea/runConfigurations/rt1010.xml | 2 +- .idea/runConfigurations/rt1060.xml | 2 +- .idea/runConfigurations/samd21g18.xml | 10 +++++++ .idea/runConfigurations/samd51j19.xml | 10 +++++++ .idea/runConfigurations/stlink.xml | 2 +- .idea/runConfigurations/stm32g474.xml | 2 +- .idea/runConfigurations/stm32h743.xml | 2 +- .idea/runConfigurations/uno_r4.xml | 2 +- examples/dual/host_hid_to_device_cdc/only.txt | 1 + examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid/src/tusb_config.h | 3 --- examples/host/hid_controller/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + examples/host/msc_file_explorer/src/tusb_config.h | 3 --- examples/make.mk | 13 ++++----- examples/rules.mk | 2 +- hw/bsp/family_support.cmake | 14 ++++++++++ hw/bsp/nrf/family.cmake | 1 - hw/bsp/samd21/family.cmake | 1 - hw/bsp/samd21/family.mk | 32 +++++++++++------------ hw/bsp/samd51/family.cmake | 1 - 34 files changed, 101 insertions(+), 50 deletions(-) create mode 100644 .idea/runConfigurations/lpc54628.xml create mode 100644 .idea/runConfigurations/lpc55s69.xml create mode 100644 .idea/runConfigurations/samd21g18.xml create mode 100644 .idea/runConfigurations/samd51j19.xml (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 8d19b7624..89ec1066c 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -33,7 +33,7 @@ - + @@ -53,8 +53,8 @@ - - + + \ No newline at end of file diff --git a/.idea/runConfigurations/kl25.xml b/.idea/runConfigurations/kl25.xml index a08c20d44..66f8ea684 100644 --- a/.idea/runConfigurations/kl25.xml +++ b/.idea/runConfigurations/kl25.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/lpc1857.xml b/.idea/runConfigurations/lpc1857.xml index 7525f51f7..f7d4ba402 100644 --- a/.idea/runConfigurations/lpc1857.xml +++ b/.idea/runConfigurations/lpc1857.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/lpc4088.xml b/.idea/runConfigurations/lpc4088.xml index 7b32b2b85..911876903 100644 --- a/.idea/runConfigurations/lpc4088.xml +++ b/.idea/runConfigurations/lpc4088.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/lpc54628.xml b/.idea/runConfigurations/lpc54628.xml new file mode 100644 index 000000000..e0047f187 --- /dev/null +++ b/.idea/runConfigurations/lpc54628.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/lpc55s69.xml b/.idea/runConfigurations/lpc55s69.xml new file mode 100644 index 000000000..d5e9b117a --- /dev/null +++ b/.idea/runConfigurations/lpc55s69.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/mcx947.xml b/.idea/runConfigurations/mcx947.xml index 77dec59f8..31e5c27dd 100644 --- a/.idea/runConfigurations/mcx947.xml +++ b/.idea/runConfigurations/mcx947.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/nrf52840.xml b/.idea/runConfigurations/nrf52840.xml index 2f3f1876a..3ffa16385 100644 --- a/.idea/runConfigurations/nrf52840.xml +++ b/.idea/runConfigurations/nrf52840.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/nrf5340.xml b/.idea/runConfigurations/nrf5340.xml index 98fe39d80..2f8009444 100644 --- a/.idea/runConfigurations/nrf5340.xml +++ b/.idea/runConfigurations/nrf5340.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra4m1.xml b/.idea/runConfigurations/ra4m1.xml index 561b509a2..6135e5cf3 100644 --- a/.idea/runConfigurations/ra4m1.xml +++ b/.idea/runConfigurations/ra4m1.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra6m1.xml b/.idea/runConfigurations/ra6m1.xml index 099510c60..0833d43b3 100644 --- a/.idea/runConfigurations/ra6m1.xml +++ b/.idea/runConfigurations/ra6m1.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra6m5.xml b/.idea/runConfigurations/ra6m5.xml index 0cffac135..606e04e52 100644 --- a/.idea/runConfigurations/ra6m5.xml +++ b/.idea/runConfigurations/ra6m5.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/rt1010.xml b/.idea/runConfigurations/rt1010.xml index 63df076b1..f4f48181c 100644 --- a/.idea/runConfigurations/rt1010.xml +++ b/.idea/runConfigurations/rt1010.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/rt1060.xml b/.idea/runConfigurations/rt1060.xml index 147f197a2..3d740edeb 100644 --- a/.idea/runConfigurations/rt1060.xml +++ b/.idea/runConfigurations/rt1060.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/samd21g18.xml b/.idea/runConfigurations/samd21g18.xml new file mode 100644 index 000000000..9a1e65563 --- /dev/null +++ b/.idea/runConfigurations/samd21g18.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/samd51j19.xml b/.idea/runConfigurations/samd51j19.xml new file mode 100644 index 000000000..74d0e3649 --- /dev/null +++ b/.idea/runConfigurations/samd51j19.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/stlink.xml b/.idea/runConfigurations/stlink.xml index 7e9166d90..b29b63f1a 100644 --- a/.idea/runConfigurations/stlink.xml +++ b/.idea/runConfigurations/stlink.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/stm32g474.xml b/.idea/runConfigurations/stm32g474.xml index 2e4c4b82a..a7267fe90 100644 --- a/.idea/runConfigurations/stm32g474.xml +++ b/.idea/runConfigurations/stm32g474.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/stm32h743.xml b/.idea/runConfigurations/stm32h743.xml index f0ab6e9e7..9cd142de0 100644 --- a/.idea/runConfigurations/stm32h743.xml +++ b/.idea/runConfigurations/stm32h743.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/uno_r4.xml b/.idea/runConfigurations/uno_r4.xml index e9e1ebb8d..75eb3df4d 100644 --- a/.idea/runConfigurations/uno_r4.xml +++ b/.idea/runConfigurations/uno_r4.xml @@ -1,5 +1,5 @@ - + diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index a3b567f9a..cfc87eb4e 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -3,3 +3,4 @@ board:mimxrt1064_evk board:mcb1800 mcu:RP2040 mcu:ra6m5 +mcu:MAX3421 diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index f8aa2186f..3837ac8a2 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -10,3 +10,4 @@ mcu:RP2040 mcu:MSP432E4 mcu:RX65X mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index f8aa2186f..3837ac8a2 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -10,3 +10,4 @@ mcu:RP2040 mcu:MSP432E4 mcu:RX65X mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 8d3ef8891..c8e9138e3 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -38,9 +38,6 @@ // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 #define CFG_TUH_RPI_PIO_USB 0 #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -//#elif CFG_TUSB_MCU == OPT_MCU_NRF5X -// // Use external USB controller (via SPI) MAX3421E (aka usb host shield) -// #define CFG_TUH_MAX3421 1 #endif // RHPort number used for host can be defined by board.mk, default to port 0 diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index f8aa2186f..3837ac8a2 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -10,3 +10,4 @@ mcu:RP2040 mcu:MSP432E4 mcu:RX65X mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index f8aa2186f..3837ac8a2 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -10,3 +10,4 @@ mcu:RP2040 mcu:MSP432E4 mcu:RX65X mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index e6186ba46..b4ccd8223 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -38,9 +38,6 @@ // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 #define CFG_TUH_RPI_PIO_USB 0 #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -//#elif CFG_TUSB_MCU == OPT_MCU_NRF5X -// // Use external USB controller (via SPI) MAX3421E (aka usb host shield) -// #define CFG_TUH_MAX3421 1 #endif diff --git a/examples/make.mk b/examples/make.mk index a590e34f7..8fe4a3486 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -73,7 +73,6 @@ ifeq ($(FAMILY),) else # Include Family and Board specific defs include $(TOP)/$(FAMILY_PATH)/family.mk - SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif @@ -84,9 +83,6 @@ CROSS_COMPILE ?= arm-none-eabi- ifeq ($(TOOLCHAIN),iar) CC := iccarm -endif - -ifeq ($(CC),iccarm) USE_IAR = 1 endif @@ -105,13 +101,12 @@ endif #-------------- Source files and compiler flags -------------- # tinyusb makefile include $(TOP)/src/tinyusb.mk +SRC_C += $(TINYUSB_SRC_C) # Include all source C in family & board folder SRC_C += hw/bsp/board.c SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) -SRC_C += $(TINYUSB_SRC_C) - INC += \ $(TOP)/$(FAMILY_PATH) \ $(TOP)/src \ @@ -119,6 +114,12 @@ INC += \ BOARD_UPPER = $(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$(subst -,_,$(BOARD)))))))))))))))))))))))))))) CFLAGS += -DBOARD_$(BOARD_UPPER) +# use max3421 as host controller +ifeq (${MAX3421_HOST},1) + SRC_C += src/portable/analog/max3421/hcd_max3421.c + CFLAGS += -DCFG_TUH_MAX3421=1 +endif + # Log level is mapped to TUSB DEBUG option ifneq ($(LOG),) CMAKE_DEFSYM += -DLOG=$(LOG) diff --git a/examples/rules.mk b/examples/rules.mk index 44d6b84c8..227849a18 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -72,7 +72,7 @@ endif # get depenecies .PHONY: get-deps get-deps: - $(PYTHON) $(TOP)/tools/get_deps.py $(DEPS_SUBMODULES) + $(PYTHON) $(TOP)/tools/get_deps.py ${FAMILY} .PHONY: size size: $(BUILD)/$(PROJECT).elf diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 1cbcfb2a7..642282b0e 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -253,6 +253,15 @@ function(family_add_tinyusb TARGET OPT_MCU RTOS) # link tinyusb with freeRTOS kernel target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel) endif () + + # use max3421 as host controller + if (MAX3421_HOST STREQUAL "1") + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUH_MAX3421=1) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/analog/max3421/hcd_max3421.c + ) + endif () + endfunction() @@ -438,5 +447,10 @@ if (NOT FAMILY_MCUS) set(FAMILY_MCUS ${FAMILY}) endif() +# if use max3421 as host controller, expand FAMILY_MCUS to include max3421 +if (MAX3421_HOST STREQUAL "1") + set(FAMILY_MCUS ${FAMILY_MCUS} MAX3421) +endif () + # save it in case of re-inclusion set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index ff6b882ce..99d9ac6dd 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -124,7 +124,6 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c - ${TOP}/src/portable/analog/max3421/hcd_max3421.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/samd21/family.cmake b/hw/bsp/samd21/family.cmake index ffbf687a1..07186934a 100644 --- a/hw/bsp/samd21/family.cmake +++ b/hw/bsp/samd21/family.cmake @@ -94,7 +94,6 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_SAMD21 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c - ${TOP}/src/portable/analog/max3421/hcd_max3421.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 49a1a781a..79c63812d 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -1,5 +1,5 @@ UF2_FAMILY_ID = 0x68ed2b88 -DEPS_SUBMODULES += hw/mcu/microchip +SDK_DIR = hw/mcu/microchip/samd21 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m0plus @@ -18,24 +18,24 @@ CFLAGS_SKIP += -Wcast-qual SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/samd21/gcc/gcc/startup_samd21.c \ - hw/mcu/microchip/samd21/gcc/system_samd21.c \ - hw/mcu/microchip/samd21/hpl/gclk/hpl_gclk.c \ - hw/mcu/microchip/samd21/hpl/pm/hpl_pm.c \ - hw/mcu/microchip/samd21/hpl/sysctrl/hpl_sysctrl.c \ - hw/mcu/microchip/samd21/hal/src/hal_atomic.c + ${SDK_DIR}/gcc/gcc/startup_samd21.c \ + ${SDK_DIR}/gcc/system_samd21.c \ + ${SDK_DIR}/hpl/gclk/hpl_gclk.c \ + ${SDK_DIR}/hpl/pm/hpl_pm.c \ + ${SDK_DIR}/hpl/sysctrl/hpl_sysctrl.c \ + ${SDK_DIR}/hal/src/hal_atomic.c INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/hw/mcu/microchip/samd21/ \ - $(TOP)/hw/mcu/microchip/samd21/config \ - $(TOP)/hw/mcu/microchip/samd21/include \ - $(TOP)/hw/mcu/microchip/samd21/hal/include \ - $(TOP)/hw/mcu/microchip/samd21/hal/utils/include \ - $(TOP)/hw/mcu/microchip/samd21/hpl/pm/ \ - $(TOP)/hw/mcu/microchip/samd21/hpl/port \ - $(TOP)/hw/mcu/microchip/samd21/hri \ - $(TOP)/hw/mcu/microchip/samd21/CMSIS/Include + $(TOP)/${SDK_DIR}/ \ + $(TOP)/${SDK_DIR}/config \ + $(TOP)/${SDK_DIR}/include \ + $(TOP)/${SDK_DIR}/hal/include \ + $(TOP)/${SDK_DIR}/hal/utils/include \ + $(TOP)/${SDK_DIR}/hpl/pm/ \ + $(TOP)/${SDK_DIR}/hpl/port \ + $(TOP)/${SDK_DIR}/hri \ + $(TOP)/${SDK_DIR}/CMSIS/Include # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ diff --git a/hw/bsp/samd51/family.cmake b/hw/bsp/samd51/family.cmake index 1dce483fd..fa9586066 100644 --- a/hw/bsp/samd51/family.cmake +++ b/hw/bsp/samd51/family.cmake @@ -93,7 +93,6 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_SAMD51 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c - ${TOP}/src/portable/analog/max3421/hcd_max3421.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) -- cgit v1.3.1 From a7c136c03f0c4a057f8b49c10ed9cddcecf52879 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 25 Sep 2023 16:53:11 +0700 Subject: adding host/cdc_msc_hid_freertos example --- .idea/cmake.xml | 19 +-- examples/device/cdc_msc_freertos/Makefile | 2 +- examples/device/cdc_msc_freertos/src/main.c | 70 ++++----- examples/host/bare_api/CMakeLists.txt | 5 + examples/host/cdc_msc_hid/CMakeLists.txt | 5 + examples/host/cdc_msc_hid_freertos/CMakeLists.txt | 36 +++++ .../host/cdc_msc_hid_freertos/src/CMakeLists.txt | 4 + examples/host/cdc_msc_hid_freertos/src/main.c | 170 +++++++++++++++++++++ .../host/cdc_msc_hid_freertos/src/tusb_config.h | 133 ++++++++++++++++ examples/host/hid_controller/CMakeLists.txt | 5 + examples/host/msc_file_explorer/CMakeLists.txt | 5 + examples/make.mk | 3 - .../boards/adafruit_metro_esp32s2/board.h | 8 + hw/bsp/espressif/boards/espressif_kaluga_1/board.h | 8 + .../boards/espressif_s2_devkitc/board.cmake | 2 + .../espressif/boards/espressif_s2_devkitc/board.h | 45 ++++++ hw/bsp/espressif/boards/family.c | 130 +++++++++++++--- .../components/tinyusb_src/CMakeLists.txt | 79 ++++++---- src/host/usbh.c | 2 +- src/portable/analog/max3421/hcd_max3421.c | 2 +- 20 files changed, 622 insertions(+), 111 deletions(-) create mode 100644 examples/host/cdc_msc_hid_freertos/CMakeLists.txt create mode 100644 examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt create mode 100644 examples/host/cdc_msc_hid_freertos/src/main.c create mode 100644 examples/host/cdc_msc_hid_freertos/src/tusb_config.h create mode 100644 hw/bsp/espressif/boards/espressif_s2_devkitc/board.cmake create mode 100644 hw/bsp/espressif/boards/espressif_s2_devkitc/board.h (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 89ec1066c..747f0fb58 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,23 +2,24 @@ - + - - - - + + + + + + + + - - - @@ -53,7 +54,7 @@ - + diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 0bee668b7..3ac62a79c 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -10,7 +10,7 @@ INC += \ src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ - $(TOP)/$(FREERTOS_PORTABLE_SRC) + $(TOP)/$(FREERTOS_PORTABLE_SRC) \ # Example source EXAMPLE_SOURCE = \ diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 0b115a595..1dadc4513 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -41,6 +41,7 @@ #define USBD_STACK_SIZE 4096 #else + #include "FreeRTOS.h" #include "semphr.h" #include "queue.h" @@ -54,7 +55,7 @@ #define CDC_STACK_SZIE configMINIMAL_STACK_SIZE //--------------------------------------------------------------------+ -// MACRO CONSTANT TYPEDEF PROTYPES +// MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ /* Blink pattern @@ -62,7 +63,7 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, BLINK_MOUNTED = 1000, BLINK_SUSPENDED = 2500, @@ -81,16 +82,15 @@ StaticTask_t cdc_taskdef; TimerHandle_t blinky_tm; -void led_blinky_cb(TimerHandle_t xTimer); -void usb_device_task(void* param); -void cdc_task(void* params); +static void led_blinky_cb(TimerHandle_t xTimer); +static void usb_device_task(void *param); +void cdc_task(void *params); //--------------------------------------------------------------------+ // Main //--------------------------------------------------------------------+ -int main(void) -{ +int main(void) { board_init(); #if configSUPPORT_STATIC_ALLOCATION @@ -104,8 +104,8 @@ int main(void) xTaskCreateStatic(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); #else blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb); - xTaskCreate( usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); - xTaskCreate( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); + xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif xTimerStart(blinky_tm, 0); @@ -119,16 +119,14 @@ int main(void) } #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) -void app_main(void) -{ +void app_main(void) { main(); } #endif // USB Device Driver task // This top level thread process all usb events and invoke callbacks -void usb_device_task(void* param) -{ +static void usb_device_task(void *param) { (void) param; // init device stack on configured roothub port @@ -141,8 +139,7 @@ void usb_device_task(void* param) } // RTOS forever loop - while (1) - { + while (1) { // put this thread to waiting state until there is new events tud_task(); @@ -156,35 +153,28 @@ void usb_device_task(void* param) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0); } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ +void tud_suspend_cb(bool remote_wakeup_en) { (void) remote_wakeup_en; xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_SUSPENDED), 0); } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ - if (tud_mounted()) - { +void tud_resume_cb(void) { + if (tud_mounted()) { xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_MOUNTED), 0); - } - else - { + } else { xTimerChangePeriod(blinky_tm, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), 0); } } @@ -192,20 +182,17 @@ void tud_resume_cb(void) //--------------------------------------------------------------------+ // USB CDC //--------------------------------------------------------------------+ -void cdc_task(void* params) -{ +void cdc_task(void *params) { (void) params; // RTOS forever loop - while ( 1 ) - { + while (1) { // connected() check for DTR bit // Most but not all terminal client set this when making connection // if ( tud_cdc_connected() ) { // There are data available - while ( tud_cdc_available() ) - { + while (tud_cdc_available()) { uint8_t buf[64]; // read and echo back @@ -228,32 +215,27 @@ void cdc_task(void* params) } // Invoked when cdc when line state changed e.g connected/disconnected -void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) -{ +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { (void) itf; (void) rts; // TODO set some indicator - if ( dtr ) - { + if (dtr) { // Terminal connected - }else - { + } else { // Terminal disconnected } } // Invoked when CDC interface received data from host -void tud_cdc_rx_cb(uint8_t itf) -{ +void tud_cdc_rx_cb(uint8_t itf) { (void) itf; } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinky_cb(TimerHandle_t xTimer) -{ +static void led_blinky_cb(TimerHandle_t xTimer) { (void) xTimer; static bool led_state = false; diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 05398b079..76182d6fa 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index ad5751705..a7c372a34 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source diff --git a/examples/host/cdc_msc_hid_freertos/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt new file mode 100644 index 000000000..2e95a18e0 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/CMakeLists.txt @@ -0,0 +1,36 @@ +cmake_minimum_required(VERSION 3.17) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) + +# gets PROJECT name for the example (e.g. -) +family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) + +project(${PROJECT} C CXX ASM) + +# Checks this example is valid for the family and initializes the project +family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) + +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + +add_executable(${PROJECT}) + +# Example source +target_sources(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src/cdc_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/freertos_hook.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/hid_app.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_app.c + ) + +# Example include +target_include_directories(${PROJECT} PUBLIC + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} freertos) diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt new file mode 100644 index 000000000..dd7ec8e58 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "hid_app.c" "main.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c new file mode 100644 index 000000000..e2ddd52eb --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -0,0 +1,170 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include +#include +#include + +#include "bsp/board_api.h" +#include "tusb.h" + +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + // ESP-IDF need "freertos/" prefix in include path. + // CFG_TUSB_OS_INC_PATH should be defined accordingly. + #include "freertos/FreeRTOS.h" + #include "freertos/semphr.h" + #include "freertos/queue.h" + #include "freertos/task.h" + #include "freertos/timers.h" + + #define USBH_STACK_SIZE 4096 +#else + #include "FreeRTOS.h" + #include "semphr.h" + #include "queue.h" + #include "task.h" + #include "timers.h" + + // Increase stack size when debug log is enabled + #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) +#endif + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF PROTOTYPES +//--------------------------------------------------------------------+ +/* Blink pattern + * - 250 ms : device not mounted + * - 1000 ms : device mounted + * - 2500 ms : device is suspended + */ +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; + +// static timer & task +#if configSUPPORT_STATIC_ALLOCATION +StaticTimer_t blinky_tmdef; + +StackType_t usb_host_stack[USBH_STACK_SIZE]; +StaticTask_t usb_host_taskdef; + +//StackType_t cdc_stack[CDC_STACK_SZIE]; +//StaticTask_t cdc_taskdef; +#endif + + +TimerHandle_t blinky_tm; + +static void led_blinky_cb(TimerHandle_t xTimer); +static void usb_host_task(void* param); + +extern void cdc_app_task(void); +extern void hid_app_task(void); + +/*------------- MAIN -------------*/ +int main(void) { + board_init(); + + printf("TinyUSB Host CDC MSC HID with FreeRTOS Example\r\n"); + +#if configSUPPORT_STATIC_ALLOCATION + // soft timer for blinky + blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); + + // Create a task for tinyusb device stack + xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef); + + // Create CDC task + //xTaskCreateStatic(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); +#else + blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb); + xTaskCreate( usb_device_task, "usbd", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); + //xTaskCreate( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); +#endif + + xTimerStart(blinky_tm, 0); + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + vTaskStartScheduler(); +#endif + + return 0; +} + +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +void app_main(void) { + main(); +} +#endif + +// USB Host task +// This top level thread process all usb events and invoke callbacks +static void usb_host_task(void *param) { + (void) param; + + // init host stack on configured roothub port + tuh_init(BOARD_TUH_RHPORT); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + + // RTOS forever loop + while (1) { + // put this thread to waiting state until there is new events + tuh_task(); + + // following code only run if tuh_task() process at least 1 event + } +} + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +void tuh_mount_cb(uint8_t dev_addr) { + // application set-up + printf("A device with address %d is mounted\r\n", dev_addr); +} + +void tuh_umount_cb(uint8_t dev_addr) { + // application tear-down + printf("A device with address %d is unmounted \r\n", dev_addr); +} + + +//--------------------------------------------------------------------+ +// BLINKING TASK +//--------------------------------------------------------------------+ +static void led_blinky_cb(TimerHandle_t xTimer) { + (void) xTimer; + static bool led_state = false; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle +} diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h new file mode 100644 index 000000000..1bed9a9b3 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -0,0 +1,133 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// Board Specific Configuration +//--------------------------------------------------------------------+ + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 + #define CFG_TUH_RPI_PIO_USB 0 + #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB +#endif + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +// defined by compiler flags for flexibility +#ifndef CFG_TUSB_MCU +#error CFG_TUSB_MCU must be defined +#endif + +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_FREERTOS +#endif + +// Espressif IDF requires "freertos/" prefix in include path +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + +#ifndef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG 0 +#endif + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUH_MEM_SECTION +#define CFG_TUH_MEM_SECTION +#endif + +#ifndef CFG_TUH_MEM_ALIGN +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// CONFIGURATION +//-------------------------------------------------------------------- + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 1 // number of supported hubs +#define CFG_TUH_CDC 1 // CDC ACM +#define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces +#define CFG_TUH_MSC 1 +#define CFG_TUH_VENDOR 0 + +// max device support (excluding hub device): 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) + +//------------- HID -------------// +#define CFG_TUH_HID_EPIN_BUFSIZE 64 +#define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +//------------- CDC -------------// + +// Set Line Control state on enumeration/mounted: +// DTR ( bit 0), RTS (bit 1) +#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM 0x03 + +// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t +// bit rate = 115200, 1 stop bit, no parity, 8 bit data width +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } + + +#ifdef __cplusplus + } +#endif + +#endif /* _TUSB_CONFIG_H_ */ diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index 3fb630aaa..c1b500dd8 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 1868b632e..1a57c7466 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source diff --git a/examples/make.mk b/examples/make.mk index 8fe4a3486..448d7883d 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -26,9 +26,6 @@ ifeq '$(findstring ;,$(PATH))' ';' CMDEXE := 1 # makefile shell commands should use syntax for DOS CMD, not unix sh -# Unfortunately, SHELL may point to sh or bash, which can't accept DOS syntax. -# We can't just use sh, because while sh and/or bash shell may be available, -# many Windows environments won't have utilities like realpath used below, so... # Force DOS command shell on Windows. SHELL := cmd.exe endif diff --git a/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h b/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h index 2ec80ef47..44ff11aa0 100644 --- a/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h +++ b/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h @@ -36,6 +36,14 @@ #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI2_HOST +#define MAX3421_SCK_PIN 36 +#define MAX3421_MOSI_PIN 35 +#define MAX3421_MISO_PIN 37 +#define MAX3421_CS_PIN 15 +#define MAX3421_INTR_PIN 14 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/espressif/boards/espressif_kaluga_1/board.h b/hw/bsp/espressif/boards/espressif_kaluga_1/board.h index 0acb9c439..613e6ae0c 100644 --- a/hw/bsp/espressif/boards/espressif_kaluga_1/board.h +++ b/hw/bsp/espressif/boards/espressif_kaluga_1/board.h @@ -37,6 +37,14 @@ #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI2_HOST +#define MAX3421_SCK_PIN 36 +#define MAX3421_MOSI_PIN 35 +#define MAX3421_MISO_PIN 37 +#define MAX3421_CS_PIN 15 +#define MAX3421_INTR_PIN 14 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.cmake b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.cmake new file mode 100644 index 000000000..abbdf7abc --- /dev/null +++ b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32s2") diff --git a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h new file mode 100644 index 000000000..e068efef9 --- /dev/null +++ b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// Note: On the production version (v1.2) WS2812 is connected to GPIO 18, +// however earlier revision v1.1 WS2812 is connected to GPIO 17 +#define NEOPIXEL_PIN 18 + +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 8f857fb71..250b7001e 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -45,16 +45,19 @@ static led_strip_t *strip; #endif -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +#include "driver/spi_master.h" +static void max3421_init(void); +#endif static void configure_pins(usb_hal_context_t *usb); -// Initialize on-board peripherals : led, button, uart and USB -void board_init(void) -{ +//--------------------------------------------------------------------+ +// Implementation +//--------------------------------------------------------------------+ +// Initialize on-board peripherals : led, button, uart and USB +void board_init(void) { #ifdef NEOPIXEL_PIN #ifdef NEOPIXEL_POWER_PIN gpio_reset_pin(NEOPIXEL_POWER_PIN); @@ -79,23 +82,27 @@ void board_init(void) gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); +#if CFG_TUD_ENABLED // USB Controller Hal init periph_module_reset(PERIPH_USB_MODULE); periph_module_enable(PERIPH_USB_MODULE); usb_hal_context_t hal = { - .use_external_phy = false // use built-in PHY + .use_external_phy = false // use built-in PHY }; usb_hal_init(&hal); configure_pins(&hal); +#endif + +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + max3421_init(); +#endif } -static void configure_pins(usb_hal_context_t *usb) -{ +static void configure_pins(usb_hal_context_t *usb) { /* usb_periph_iopins currently configures USB_OTG as USB Device. * Introduce additional parameters in usb_hal_context_t when adding support - * for USB Host. - */ + * for USB Host. */ for (const usb_iopin_dsc_t *iopin = usb_periph_iopins; iopin->pin != -1; ++iopin) { if ((usb->use_external_phy) || (iopin->ext_phy_only == 0)) { esp_rom_gpio_pad_select_gpio(iopin->pin); @@ -115,6 +122,7 @@ static void configure_pins(usb_hal_context_t *usb) esp_rom_gpio_pad_unhold(iopin->pin); } } + if (!usb->use_external_phy) { gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3); gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); @@ -122,8 +130,7 @@ static void configure_pins(usb_hal_context_t *usb) } // Turn LED on or off -void board_led_write(bool state) -{ +void board_led_write(bool state) { #ifdef NEOPIXEL_PIN strip->set_pixel(strip, 0, (state ? 0x88 : 0x00), 0x00, 0x00); strip->refresh(strip, 100); @@ -132,21 +139,102 @@ void board_led_write(bool state) // Get the current state of button // a '1' means active (pressed), a '0' means inactive. -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { return gpio_get_level(BUTTON_PIN) == BUTTON_STATE_ACTIVE; } // Get characters from UART -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; return 0; } // Send characters to UART -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; +int board_uart_write(void const *buf, int len) { + (void) buf; + (void) len; return 0; } + +//--------------------------------------------------------------------+ +// API: SPI transfer with MAX3421E, must be implemented by application +//--------------------------------------------------------------------+ +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 + +static spi_device_handle_t max3421_spi; + +static void IRAM_ATTR max3421_isr_handler(void* arg) +{ + (void) arg; + //uint32_t gpio_num = (uint32_t) arg; + //xQueueSendFromISR(gpio_evt_queue, &gpio_num, NULL); + tuh_int_handler(1); +} + +static void max3421_init(void) { + // CS pin + gpio_set_direction(MAX3421_CS_PIN, GPIO_MODE_OUTPUT); + gpio_set_level(MAX3421_CS_PIN, 1); + + // SPI + spi_bus_config_t buscfg={ + .miso_io_num = MAX3421_MISO_PIN, + .mosi_io_num = MAX3421_MOSI_PIN, + .sclk_io_num = MAX3421_SCK_PIN, + .quadwp_io_num = -1, + .quadhd_io_num = -1, + .data4_io_num = -1, + .data5_io_num = -1, + .data6_io_num = -1, + .data7_io_num = -1, + .max_transfer_sz = 128 + }; + ESP_ERROR_CHECK( spi_bus_initialize(MAX3421_SPI_HOST, &buscfg, SPI_DMA_CH_AUTO) ); + + spi_device_interface_config_t max3421_cfg = { + .command_bits = 8, + .mode = 0, + .clock_speed_hz = 4000000, // 26000000 + .spics_io_num = -1, // manual control CS + .queue_size = 1 + }; + ESP_ERROR_CHECK( spi_bus_add_device(MAX3421_SPI_HOST, &max3421_cfg, &max3421_spi) ); + + // Interrupt pin +// gpio_set_direction(MAX3421_INTR_PIN, GPIO_MODE_INPUT); +// gpio_set_intr_type(MAX3421_INTR_PIN, GPIO_INTR_NEGEDGE); +// +// gpio_install_isr_service(ESP_INTR_FLAG_EDGE); +// gpio_isr_handler_add(MAX3421_INTR_PIN, max3421_isr_handler, NULL); +} + +void tuh_max3421_int_api(uint8_t rhport, bool enabled) { + (void) rhport; + if (enabled) { + gpio_intr_enable(MAX3421_INTR_PIN); + } else { + gpio_intr_disable(MAX3421_INTR_PIN); + } +} + +void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) { + (void) rhport; + gpio_set_level(MAX3421_CS_PIN, active ? 0 : 1); +} + +bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_len, uint8_t *rx_buf, size_t rx_len) { + (void) rhport; + + spi_transaction_t xact = { + .length = tx_len, + .rxlength = rx_len, + .tx_buffer = tx_buf, + .rx_buffer = rx_buf + }; + + ESP_ERROR_CHECK(spi_device_transmit(max3421_spi, &xact)); + return true; +} + +#endif diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index bf8e45be2..2a154a8ff 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -16,40 +16,57 @@ else() return() endif() -list(APPEND compile_options - "-DCFG_TUSB_MCU=${tusb_mcu}" - "-DCFG_TUSB_OS=OPT_OS_FREERTOS" - #"-DCFG_TUSB_DEBUG=1" - ) +list(APPEND compile_definitions + CFG_TUSB_MCU=${tusb_mcu} + CFG_TUSB_OS=OPT_OS_FREERTOS + ) -idf_component_get_property(freertos_component_dir freertos COMPONENT_DIR) +list(APPEND srcs + # common + ${tusb_src}/tusb.c + ${tusb_src}/common/tusb_fifo.c + # device + ${tusb_src}/device/usbd.c + ${tusb_src}/device/usbd_control.c + ${tusb_src}/class/audio/audio_device.c + ${tusb_src}/class/cdc/cdc_device.c + ${tusb_src}/class/dfu/dfu_device.c + ${tusb_src}/class/dfu/dfu_rt_device.c + ${tusb_src}/class/hid/hid_device.c + ${tusb_src}/class/midi/midi_device.c + ${tusb_src}/class/msc/msc_device.c + ${tusb_src}/class/net/ecm_rndis_device.c + ${tusb_src}/class/net/ncm_device.c + ${tusb_src}/class/usbtmc/usbtmc_device.c + ${tusb_src}/class/vendor/vendor_device.c + ${tusb_src}/class/video/video_device.c + ${tusb_src}/portable/synopsys/dwc2/dcd_dwc2.c + # host + ${tusb_src}/host/usbh.c + ${tusb_src}/host/hub.c + ${tusb_src}/class/cdc/cdc_host.c + ${tusb_src}/class/hid/hid_host.c + ${tusb_src}/class/msc/msc_host.c + ${tusb_src}/class/vendor/vendor_host.c + ) -list(APPEND includes_public - "${tusb_src}" - # The FreeRTOS API include convention in tinyusb is different from esp-idf - #"${freertos_component_dir}/include/freertos" - ) +# use max3421 as host controller +if (MAX3421_HOST STREQUAL "1") + list(APPEND srcs ${tusb_src}/portable/analog/max3421/hcd_max3421.c) + list(APPEND compile_definitions CFG_TUH_MAX3421=1) +endif () -list(APPEND srcs - "${tusb_src}/tusb.c" - "${tusb_src}/common/tusb_fifo.c" - "${tusb_src}/device/usbd.c" - "${tusb_src}/device/usbd_control.c" - "${tusb_src}/class/cdc/cdc_device.c" - "${tusb_src}/class/dfu/dfu_rt_device.c" - "${tusb_src}/class/hid/hid_device.c" - "${tusb_src}/class/midi/midi_device.c" - "${tusb_src}/class/msc/msc_device.c" - "${tusb_src}/class/net/ecm_rndis_device.c" - "${tusb_src}/class/net/ncm_device.c" - "${tusb_src}/class/usbtmc/usbtmc_device.c" - "${tusb_src}/class/vendor/vendor_device.c" - "${tusb_src}/portable/synopsys/dwc2/dcd_dwc2.c" - ) +if (DEFINED LOG) + list(APPEND compile_definitions CFG_TUSB_DEBUG=${LOG}) + if (LOG STREQUAL "4") + # no inline for debug level 4 + list(APPEND compile_definitions TU_ATTR_ALWAYS_INLINE=) + endif () +endif() idf_component_register(SRCS ${srcs} - INCLUDE_DIRS ${includes_public} - REQUIRES src - ) + INCLUDE_DIRS ${tusb_src} + REQUIRES src + ) -target_compile_options(${COMPONENT_LIB} PUBLIC ${compile_options}) +target_compile_definitions(${COMPONENT_LIB} PUBLIC ${compile_definitions}) diff --git a/src/host/usbh.c b/src/host/usbh.c index e332f35cc..dc2831da3 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -659,7 +659,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result tusb_control_request_t const * request = &_ctrl_xfer.request; if (XFER_RESULT_SUCCESS != result) { - TU_LOG1("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); + TU_LOG1("[%u:%u] Control %s, xferred_bytes = %u\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); TU_LOG1_BUF(request, 8); TU_LOG1("\r\n"); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index f3f76fd58..3f6747404 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -882,7 +882,7 @@ void hcd_int_handler(uint8_t rhport) { if ( hirq & HIRQ_RCVDAV_IRQ ) { uint8_t const ep_num = _hcd_data.hxfr & HXFR_EPNUM_MASK; max3421_ep_t *ep = find_opened_ep(_hcd_data.peraddr, ep_num, 1); - uint8_t xact_len; + uint8_t xact_len = 0; // RCVDAV_IRQ can trigger 2 times (dual buffered) while ( hirq & HIRQ_RCVDAV_IRQ ) { -- cgit v1.3.1 From f6ca86c3ddeaec18f52b15f1065a5c9eea210c00 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 Sep 2023 19:09:36 +0700 Subject: tested cdc_msc_hid_freertos with samd51 add -Wno-error=format for espressif wrap up cdc_msc_hid_freertos --- examples/host/cdc_msc_hid_freertos/Makefile | 32 +++ examples/host/cdc_msc_hid_freertos/only.txt | 13 + .../host/cdc_msc_hid_freertos/src/CMakeLists.txt | 4 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 109 +++++++++ .../host/cdc_msc_hid_freertos/src/freertos_hook.c | 111 +++++++++ examples/host/cdc_msc_hid_freertos/src/hid_app.c | 263 +++++++++++++++++++++ examples/host/cdc_msc_hid_freertos/src/main.c | 22 +- examples/host/cdc_msc_hid_freertos/src/msc_app.c | 67 ++++++ hw/bsp/espressif/boards/CMakeLists.txt | 2 + hw/bsp/espressif/boards/family.c | 39 +-- .../components/tinyusb_src/CMakeLists.txt | 1 + hw/bsp/nrf/family.c | 106 +++++---- hw/bsp/samd21/family.c | 9 +- hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/samd51/family.c | 8 +- src/host/usbh.c | 2 +- 16 files changed, 703 insertions(+), 87 deletions(-) create mode 100644 examples/host/cdc_msc_hid_freertos/Makefile create mode 100644 examples/host/cdc_msc_hid_freertos/only.txt create mode 100644 examples/host/cdc_msc_hid_freertos/src/cdc_app.c create mode 100644 examples/host/cdc_msc_hid_freertos/src/freertos_hook.c create mode 100644 examples/host/cdc_msc_hid_freertos/src/hid_app.c create mode 100644 examples/host/cdc_msc_hid_freertos/src/msc_app.c (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile new file mode 100644 index 000000000..67bb6da55 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -0,0 +1,32 @@ +include ../../make.mk + +FREERTOS_SRC = lib/FreeRTOS-Kernel +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) + +INC += \ + src \ + $(TOP)/hw \ + $(TOP)/$(FREERTOS_SRC)/include \ + $(TOP)/$(FREERTOS_PORTABLE_SRC) \ + +# Example source +EXAMPLE_SOURCE = \ + src/cdc_app.c \ + src/freertos_hook.c \ + src/hid_app.c \ + src/main.c \ + src/msc_app.c \ + +SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) + +# TinyUSB Host Stack source +SRC_C += \ + src/class/cdc/cdc_host.c \ + src/class/hid/hid_host.c \ + src/class/msc/msc_host.c \ + src/host/hub.c \ + src/host/usbh.c \ + src/portable/ohci/ohci.c \ + src/portable/nxp/lpc17_40/hcd_lpc17_40.c + +include ../../rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt new file mode 100644 index 000000000..3837ac8a2 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -0,0 +1,13 @@ +mcu:LPC175X_6X +mcu:LPC177X_8X +mcu:LPC18XX +mcu:LPC40XX +mcu:LPC43XX +mcu:MIMXRT1XXX +mcu:MIMXRT10XX +mcu:MIMXRT11XX +mcu:RP2040 +mcu:MSP432E4 +mcu:RX65X +mcu:RAXXX +mcu:MAX3421 diff --git a/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt index dd7ec8e58..6f057c106 100644 --- a/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt +++ b/examples/host/cdc_msc_hid_freertos/src/CMakeLists.txt @@ -1,4 +1,6 @@ # This file is for ESP-IDF only -idf_component_register(SRCS "hid_app.c" "main.c" +idf_component_register(SRCS "cdc_app.c" "hid_app.c" "main.c" "msc_app.c" INCLUDE_DIRS "." REQUIRES boards tinyusb_src) + +target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format) diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c new file mode 100644 index 000000000..fc2b1228d --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -0,0 +1,109 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb.h" +#include "bsp/board_api.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + + +//------------- IMPLEMENTATION -------------// + +size_t get_console_inputs(uint8_t *buf, size_t bufsize) { + size_t count = 0; + while (count < bufsize) { + int ch = board_getchar(); + if (ch <= 0) break; + + buf[count] = (uint8_t) ch; + count++; + } + + return count; +} + +void cdc_app_task(void* param) { + (void) param; + + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; + + while (1) { + uint32_t count = get_console_inputs(buf, bufsize); + buf[count] = 0; + + if (count) { + // loop over all mounted interfaces + for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) { + if (tuh_cdc_mounted(idx)) { + // console --> cdc interfaces + tuh_cdc_write(idx, buf, count); + tuh_cdc_write_flush(idx); + } + } + } + + taskYIELD(); + } +} + +// Invoked when received new data +void tuh_cdc_rx_cb(uint8_t idx) { + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; + + // forward cdc interfaces -> console + uint32_t count = tuh_cdc_read(idx, buf, bufsize); + buf[count] = 0; + + printf((char *) buf); +} + +void tuh_cdc_mount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = { 0 }; + tuh_cdc_itf_get_info(idx, &itf_info); + + printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); + +#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM + // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration + // otherwise you need to call tuh_cdc_set_line_coding() first + cdc_line_coding_t line_coding = { 0 }; + if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { + printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); + } +#endif +} + +void tuh_cdc_umount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = { 0 }; + tuh_cdc_itf_get_info(idx, &itf_info); + + printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); +} diff --git a/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c new file mode 100644 index 000000000..07d159fd5 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/freertos_hook.c @@ -0,0 +1,111 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +//--------------------------------------------------------------------+ +// INCLUDE +//--------------------------------------------------------------------+ +#include "FreeRTOS.h" +#include "task.h" +#include "common/tusb_common.h" + +void vApplicationMallocFailedHook(void) { + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false,); +} + +void vApplicationStackOverflowHook(xTaskHandle pxTask, char *pcTaskName) { + (void) pxTask; + (void) pcTaskName; + + taskDISABLE_INTERRUPTS(); + TU_ASSERT(false,); +} + +/* configSUPPORT_STATIC_ALLOCATION is set to 1, so the application must provide an + * implementation of vApplicationGetIdleTaskMemory() to provide the memory that is + * used by the Idle task. */ +void vApplicationGetIdleTaskMemory(StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, + uint32_t *pulIdleTaskStackSize) { + /* If the buffers to be provided to the Idle task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xIdleTaskTCB; + static StackType_t uxIdleTaskStack[configMINIMAL_STACK_SIZE]; + + /* Pass out a pointer to the StaticTask_t structure in which the Idle task's + state will be stored. */ + *ppxIdleTaskTCBBuffer = &xIdleTaskTCB; + + /* Pass out the array that will be used as the Idle task's stack. */ + *ppxIdleTaskStackBuffer = uxIdleTaskStack; + + /* Pass out the size of the array pointed to by *ppxIdleTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configMINIMAL_STACK_SIZE is specified in words, not bytes. */ + *pulIdleTaskStackSize = configMINIMAL_STACK_SIZE; +} + +/* configSUPPORT_STATIC_ALLOCATION and configUSE_TIMERS are both set to 1, so the + * application must provide an implementation of vApplicationGetTimerTaskMemory() + * to provide the memory that is used by the Timer service task. */ +void vApplicationGetTimerTaskMemory(StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, + uint32_t *pulTimerTaskStackSize) { + /* If the buffers to be provided to the Timer task are declared inside this + * function then they must be declared static - otherwise they will be allocated on + * the stack and so not exists after this function exits. */ + static StaticTask_t xTimerTaskTCB; + static StackType_t uxTimerTaskStack[configTIMER_TASK_STACK_DEPTH]; + + /* Pass out a pointer to the StaticTask_t structure in which the Timer + task's state will be stored. */ + *ppxTimerTaskTCBBuffer = &xTimerTaskTCB; + + /* Pass out the array that will be used as the Timer task's stack. */ + *ppxTimerTaskStackBuffer = uxTimerTaskStack; + + /* Pass out the size of the array pointed to by *ppxTimerTaskStackBuffer. + Note that, as the array is necessarily of type StackType_t, + configTIMER_TASK_STACK_DEPTH is specified in words, not bytes. */ + *pulTimerTaskStackSize = configTIMER_TASK_STACK_DEPTH; +} + +#if CFG_TUSB_MCU == OPT_MCU_RX63X | CFG_TUSB_MCU == OPT_MCU_RX65X +#include "iodefine.h" +void vApplicationSetupTimerInterrupt(void) +{ + /* Enable CMT0 */ + SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); + MSTP(CMT0) = 0; + SYSTEM.PRCR.WORD = (0xA5u<<8); + + CMT0.CMCNT = 0; + CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); + CMT0.CMCR.WORD = TU_BIT(6) | 2; + IR(CMT0, CMI0) = 0; + IPR(CMT0, CMI0) = configKERNEL_INTERRUPT_PRIORITY; + IEN(CMT0, CMI0) = 1; + CMT.CMSTR0.BIT.STR0 = 1; +} +#endif diff --git a/examples/host/cdc_msc_hid_freertos/src/hid_app.c b/examples/host/cdc_msc_hid_freertos/src/hid_app.c new file mode 100644 index 000000000..a2df3b909 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/hid_app.c @@ -0,0 +1,263 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "bsp/board_api.h" +#include "tusb.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +// If your host terminal support ansi escape code such as TeraTerm +// it can be use to simulate mouse cursor movement within terminal +#define USE_ANSI_ESCAPE 0 + +#define MAX_REPORT 4 + +static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; + +// Each HID instance can has multiple reports +static struct { + uint8_t report_count; + tuh_hid_report_info_t report_info[MAX_REPORT]; +} hid_info[CFG_TUH_HID]; + +static void process_kbd_report(hid_keyboard_report_t const *report); +static void process_mouse_report(hid_mouse_report_t const *report); +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len); + +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + +// Invoked when device with hid interface is mounted +// Report descriptor is also available for use. tuh_hid_parse_report_descriptor() +// can be used to parse common/simple enough descriptor. +// Note: if report descriptor length > CFG_TUH_ENUMERATION_BUFSIZE, it will be skipped +// therefore report_desc = NULL, desc_len = 0 +void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *desc_report, uint16_t desc_len) { + printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); + + // Interface protocol (hid_interface_protocol_enum_t) + const char *protocol_str[] = { "None", "Keyboard", "Mouse" }; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]); + + // By default host stack will use activate boot protocol on supported interface. + // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser) + if (itf_protocol == HID_ITF_PROTOCOL_NONE) { + hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, + desc_report, desc_len); + printf("HID has %u reports \r\n", hid_info[instance].report_count); + } + + // request to receive report + // tuh_hid_report_received_cb() will be invoked when report is available + if (!tuh_hid_receive_report(dev_addr, instance)) { + printf("Error: cannot request to receive report\r\n"); + } +} + +// Invoked when device with hid interface is un-mounted +void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) { + printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); +} + +// Invoked when received report from device via interrupt endpoint +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + + switch (itf_protocol) { + case HID_ITF_PROTOCOL_KEYBOARD: + TU_LOG2("HID receive boot keyboard report\r\n"); + process_kbd_report((hid_keyboard_report_t const *) report); + break; + + case HID_ITF_PROTOCOL_MOUSE: + TU_LOG2("HID receive boot mouse report\r\n"); + process_mouse_report((hid_mouse_report_t const *) report); + break; + + default: + // Generic report requires matching ReportID and contents with previous parsed report info + process_generic_report(dev_addr, instance, report, len); + break; + } + + // continue to request to receive report + if (!tuh_hid_receive_report(dev_addr, instance)) { + printf("Error: cannot request to receive report\r\n"); + } +} + +//--------------------------------------------------------------------+ +// Keyboard +//--------------------------------------------------------------------+ + +// look up new key in previous keys +static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) { + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i] == keycode) return true; + } + + return false; +} + +static void process_kbd_report(hid_keyboard_report_t const *report) { + static hid_keyboard_report_t prev_report = { 0, 0, { 0 } }; // previous report to check key released + + //------------- example code ignore control (non-printable) key affects -------------// + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i]) { + if (find_key_in_report(&prev_report, report->keycode[i])) { + // exist in previous report means the current key is holding + } else { + // not existed in previous report means the current key is pressed + bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); + uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0]; + putchar(ch); + if (ch == '\r') putchar('\n'); // added new line for enter key + + #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? + fflush(stdout); // flush right away, else nanolib will wait for newline + #endif + } + } + // TODO example skips key released + } + + prev_report = *report; +} + +//--------------------------------------------------------------------+ +// Mouse +//--------------------------------------------------------------------+ + +void cursor_movement(int8_t x, int8_t y, int8_t wheel) { +#if USE_ANSI_ESCAPE + // Move X using ansi escape + if ( x < 0) { + printf(ANSI_CURSOR_BACKWARD(%d), (-x)); // move left + }else if ( x > 0) { + printf(ANSI_CURSOR_FORWARD(%d), x); // move right + } + + // Move Y using ansi escape + if ( y < 0) { + printf(ANSI_CURSOR_UP(%d), (-y)); // move up + }else if ( y > 0) { + printf(ANSI_CURSOR_DOWN(%d), y); // move down + } + + // Scroll using ansi escape + if (wheel < 0) { + printf(ANSI_SCROLL_UP(%d), (-wheel)); // scroll up + }else if (wheel > 0) { + printf(ANSI_SCROLL_DOWN(%d), wheel); // scroll down + } + + printf("\r\n"); +#else + printf("(%d %d %d)\r\n", x, y, wheel); +#endif +} + +static void process_mouse_report(hid_mouse_report_t const *report) { + static hid_mouse_report_t prev_report = { 0 }; + + //------------- button state -------------// + uint8_t button_changed_mask = report->buttons ^ prev_report.buttons; + if (button_changed_mask & report->buttons) { + printf(" %c%c%c ", + report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-', + report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-', + report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'); + } + + //------------- cursor movement -------------// + cursor_movement(report->x, report->y, report->wheel); +} + +//--------------------------------------------------------------------+ +// Generic Report +//--------------------------------------------------------------------+ +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len) { + (void) dev_addr; + + uint8_t const rpt_count = hid_info[instance].report_count; + tuh_hid_report_info_t *rpt_info_arr = hid_info[instance].report_info; + tuh_hid_report_info_t *rpt_info = NULL; + + if (rpt_count == 1 && rpt_info_arr[0].report_id == 0) { + // Simple report without report ID as 1st byte + rpt_info = &rpt_info_arr[0]; + } else { + // Composite report, 1st byte is report ID, data starts from 2nd byte + uint8_t const rpt_id = report[0]; + + // Find report id in the array + for (uint8_t i = 0; i < rpt_count; i++) { + if (rpt_id == rpt_info_arr[i].report_id) { + rpt_info = &rpt_info_arr[i]; + break; + } + } + + report++; + len--; + } + + if (!rpt_info) { + printf("Couldn't find report info !\r\n"); + return; + } + + // For complete list of Usage Page & Usage checkout src/class/hid/hid.h. For examples: + // - Keyboard : Desktop, Keyboard + // - Mouse : Desktop, Mouse + // - Gamepad : Desktop, Gamepad + // - Consumer Control (Media Key) : Consumer, Consumer Control + // - System Control (Power key) : Desktop, System Control + // - Generic (vendor) : 0xFFxx, xx + if (rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP) { + switch (rpt_info->usage) { + case HID_USAGE_DESKTOP_KEYBOARD: + TU_LOG1("HID receive keyboard report\r\n"); + // Assume keyboard follow boot report layout + process_kbd_report((hid_keyboard_report_t const *) report); + break; + + case HID_USAGE_DESKTOP_MOUSE: + TU_LOG1("HID receive mouse report\r\n"); + // Assume mouse follow boot report layout + process_mouse_report((hid_mouse_report_t const *) report); + break; + + default: + break; + } + } +} diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index e2ddd52eb..d5574789f 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -51,6 +51,8 @@ #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) #endif +#define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ @@ -72,18 +74,16 @@ StaticTimer_t blinky_tmdef; StackType_t usb_host_stack[USBH_STACK_SIZE]; StaticTask_t usb_host_taskdef; -//StackType_t cdc_stack[CDC_STACK_SZIE]; -//StaticTask_t cdc_taskdef; +StackType_t cdc_stack[CDC_STACK_SZIE]; +StaticTask_t cdc_taskdef; #endif - TimerHandle_t blinky_tm; static void led_blinky_cb(TimerHandle_t xTimer); static void usb_host_task(void* param); -extern void cdc_app_task(void); -extern void hid_app_task(void); +extern void cdc_app_task(void* param); /*------------- MAIN -------------*/ int main(void) { @@ -91,19 +91,15 @@ int main(void) { printf("TinyUSB Host CDC MSC HID with FreeRTOS Example\r\n"); + // Create soft timer for blinky, task for tinyusb stack and CDC #if configSUPPORT_STATIC_ALLOCATION - // soft timer for blinky blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); - - // Create a task for tinyusb device stack xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef); - - // Create CDC task - //xTaskCreateStatic(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); #else blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb); - xTaskCreate( usb_device_task, "usbd", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); - //xTaskCreate( cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); + xTaskCreate(usb_host_task, "usbd", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); + xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); #endif xTimerStart(blinky_tm, 0); diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c new file mode 100644 index 000000000..a8d6fbfaa --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -0,0 +1,67 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "tusb.h" + +#if CFG_TUH_MSC + +static scsi_inquiry_resp_t inquiry_resp; + +bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_data) { + msc_cbw_t const *cbw = cb_data->cbw; + msc_csw_t const *csw = cb_data->csw; + + if (csw->status != 0) { + printf("Inquiry failed\r\n"); + return false; + } + + // Print out Vendor ID, Product ID and Rev + printf("%.8s %.16s rev %.4s\r\n", inquiry_resp.vendor_id, inquiry_resp.product_id, inquiry_resp.product_rev); + + // Get capacity of device + uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); + uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); + + printf("Disk Size: %lu MB\r\n", block_count / ((1024 * 1024) / block_size)); + printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + + return true; +} + +//------------- IMPLEMENTATION -------------// +void tuh_msc_mount_cb(uint8_t dev_addr) { + printf("A MassStorage device is mounted\r\n"); + + uint8_t const lun = 0; + tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0); +} + +void tuh_msc_umount_cb(uint8_t dev_addr) { + (void) dev_addr; + printf("A MassStorage device is unmounted\r\n"); +} + +#endif diff --git a/hw/bsp/espressif/boards/CMakeLists.txt b/hw/bsp/espressif/boards/CMakeLists.txt index 325263c1d..8209e8747 100644 --- a/hw/bsp/espressif/boards/CMakeLists.txt +++ b/hw/bsp/espressif/boards/CMakeLists.txt @@ -4,3 +4,5 @@ idf_component_register(SRCS family.c INCLUDE_DIRS "." ${BOARD} ${hw_dir} PRIV_REQUIRES "driver" REQUIRES led_strip src tinyusb_src) + +target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format) diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 250b7001e..d96d86670 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -33,6 +33,7 @@ #include "soc/usb_periph.h" #include "driver/rmt.h" +#include "driver/uart.h" #if ESP_IDF_VERSION_MAJOR > 4 #include "esp_private/periph_ctrl.h" @@ -145,9 +146,7 @@ uint32_t board_button_read(void) { // Get characters from UART int board_uart_read(uint8_t *buf, int len) { - (void) buf; - (void) len; - return 0; + return uart_read_bytes(UART_NUM_0, buf, len, 0); } // Send characters to UART @@ -157,6 +156,11 @@ int board_uart_write(void const *buf, int len) { return 0; } +int board_getchar(void) { + char c; + return (uart_read_bytes(UART_NUM_0, &c, 1, 0) > 0) ? (int) c : (-1); +} + //--------------------------------------------------------------------+ // API: SPI transfer with MAX3421E, must be implemented by application //--------------------------------------------------------------------+ @@ -164,12 +168,12 @@ int board_uart_write(void const *buf, int len) { static spi_device_handle_t max3421_spi; -static void IRAM_ATTR max3421_isr_handler(void* arg) -{ - (void) arg; - //uint32_t gpio_num = (uint32_t) arg; +static void IRAM_ATTR max3421_isr_handler(void* arg) { + (void) arg; // arg is gpio num //xQueueSendFromISR(gpio_evt_queue, &gpio_num, NULL); + gpio_set_level(13, 1); tuh_int_handler(1); + gpio_set_level(13, 0); } static void max3421_init(void) { @@ -188,12 +192,11 @@ static void max3421_init(void) { .data5_io_num = -1, .data6_io_num = -1, .data7_io_num = -1, - .max_transfer_sz = 128 + .max_transfer_sz = 1024 }; ESP_ERROR_CHECK( spi_bus_initialize(MAX3421_SPI_HOST, &buscfg, SPI_DMA_CH_AUTO) ); spi_device_interface_config_t max3421_cfg = { - .command_bits = 8, .mode = 0, .clock_speed_hz = 4000000, // 26000000 .spics_io_num = -1, // manual control CS @@ -201,12 +204,16 @@ static void max3421_init(void) { }; ESP_ERROR_CHECK( spi_bus_add_device(MAX3421_SPI_HOST, &max3421_cfg, &max3421_spi) ); + // debug + gpio_set_direction(13, GPIO_MODE_OUTPUT); + gpio_set_level(13, 0); + // Interrupt pin -// gpio_set_direction(MAX3421_INTR_PIN, GPIO_MODE_INPUT); -// gpio_set_intr_type(MAX3421_INTR_PIN, GPIO_INTR_NEGEDGE); -// -// gpio_install_isr_service(ESP_INTR_FLAG_EDGE); -// gpio_isr_handler_add(MAX3421_INTR_PIN, max3421_isr_handler, NULL); + gpio_set_direction(MAX3421_INTR_PIN, GPIO_MODE_INPUT); + gpio_set_intr_type(MAX3421_INTR_PIN, GPIO_INTR_NEGEDGE); + + gpio_install_isr_service(0); + gpio_isr_handler_add(MAX3421_INTR_PIN, max3421_isr_handler, NULL); } void tuh_max3421_int_api(uint8_t rhport, bool enabled) { @@ -227,8 +234,8 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_l (void) rhport; spi_transaction_t xact = { - .length = tx_len, - .rxlength = rx_len, + .length = tx_len << 3, // length in bits + .rxlength = rx_len << 3, // length in bits .tx_buffer = tx_buf, .rx_buffer = rx_buf }; diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index 2a154a8ff..abe276910 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -70,3 +70,4 @@ idf_component_register(SRCS ${srcs} ) target_compile_definitions(${COMPONENT_LIB} PUBLIC ${compile_definitions}) +target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format) diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 6fcfd9476..3620bc8cc 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -95,13 +95,8 @@ TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) { //------------- Host using MAX2341E -------------// #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 +static void max3421_init(void); static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(1); - -void max3421_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { - if (!(pin == MAX3421_INTR_PIN && action == NRF_GPIOTE_POLARITY_HITOLO)) return; - - tuh_int_handler(1); -} #endif @@ -191,50 +186,7 @@ void board_init(void) { #endif #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 - // MAX3421 need 3.3v signal (may not be needed) - #if defined(UICR_REGOUT0_VOUT_Msk) && 0 - if ((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) != UICR_REGOUT0_VOUT_3V3) { - NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos; - while (NRF_NVMC->READY == NVMC_READY_READY_Busy){} - - NRF_UICR->REGOUT0 = (NRF_UICR->REGOUT0 & ~UICR_REGOUT0_VOUT_Msk) | UICR_REGOUT0_VOUT_3V3; - - NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos; - while (NRF_NVMC->READY == NVMC_READY_READY_Busy){} - - NVIC_SystemReset(); - } - #endif - - // manually manage CS - nrf_gpio_cfg_output(MAX3421_CS_PIN); - nrf_gpio_pin_write(MAX3421_CS_PIN, 1); - - // USB host using max3421e usb controller via SPI - nrfx_spim_config_t cfg = { - .sck_pin = MAX3421_SCK_PIN, - .mosi_pin = MAX3421_MOSI_PIN, - .miso_pin = MAX3421_MISO_PIN, - .ss_pin = NRFX_SPIM_PIN_NOT_USED, - .ss_active_high = false, - .irq_priority = 3, - .orc = 0xFF, - // default setting 4 Mhz, Mode 0, MSB first - .frequency = NRF_SPIM_FREQ_4M, - .mode = NRF_SPIM_MODE_0, - .bit_order = NRF_SPIM_BIT_ORDER_MSB_FIRST, - }; - - // no handler --> blocking - nrfx_spim_init(&_spi, &cfg, NULL, NULL); - - // max3421e interrupt pin - nrfx_gpiote_init(1); - nrfx_gpiote_in_config_t in_config = NRFX_GPIOTE_CONFIG_IN_SENSE_HITOLO(true); - in_config.pull = NRF_GPIO_PIN_PULLUP; - - nrfx_gpiote_in_init(MAX3421_INTR_PIN, &in_config, max3421_int_handler); - nrfx_gpiote_trigger_enable(MAX3421_INTR_PIN, true); + max3421_init(); #endif } @@ -317,6 +269,60 @@ void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) { //--------------------------------------------------------------------+ #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 +void max3421_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { + if (!(pin == MAX3421_INTR_PIN && action == NRF_GPIOTE_POLARITY_HITOLO)) return; + tuh_int_handler(1); +} + +static void max3421_init(void) { + // MAX3421 need 3.3v signal (may not be needed) +// #if defined(UICR_REGOUT0_VOUT_Msk) +// if ((NRF_UICR->REGOUT0 & UICR_REGOUT0_VOUT_Msk) != UICR_REGOUT0_VOUT_3V3) { +// NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos; +// while (NRF_NVMC->READY == NVMC_READY_READY_Busy){} +// +// NRF_UICR->REGOUT0 = (NRF_UICR->REGOUT0 & ~UICR_REGOUT0_VOUT_Msk) | UICR_REGOUT0_VOUT_3V3; +// +// NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos; +// while (NRF_NVMC->READY == NVMC_READY_READY_Busy){} +// +// NVIC_SystemReset(); +// } +// #endif + + // manually manage CS + nrf_gpio_cfg_output(MAX3421_CS_PIN); + nrf_gpio_pin_write(MAX3421_CS_PIN, 1); + + // USB host using max3421e usb controller via SPI + nrfx_spim_config_t cfg = { + .sck_pin = MAX3421_SCK_PIN, + .mosi_pin = MAX3421_MOSI_PIN, + .miso_pin = MAX3421_MISO_PIN, + .ss_pin = NRFX_SPIM_PIN_NOT_USED, + .ss_active_high = false, + .irq_priority = 3, + .orc = 0xFF, + // default setting 4 Mhz, Mode 0, MSB first + .frequency = NRF_SPIM_FREQ_4M, + .mode = NRF_SPIM_MODE_0, + .bit_order = NRF_SPIM_BIT_ORDER_MSB_FIRST, + }; + + // no handler --> blocking + nrfx_spim_init(&_spi, &cfg, NULL, NULL); + + // max3421e interrupt pin + nrfx_gpiote_init(1); + nrfx_gpiote_in_config_t in_config = NRFX_GPIOTE_CONFIG_IN_SENSE_HITOLO(true); + in_config.pull = NRF_GPIO_PIN_PULLUP; + + NVIC_SetPriority(GPIOTE_IRQn, 2); + + nrfx_gpiote_in_init(MAX3421_INTR_PIN, &in_config, max3421_int_handler); + nrfx_gpiote_trigger_enable(MAX3421_INTR_PIN, true); +} + void tuh_max3421_int_api(uint8_t rhport, bool enabled) { (void) rhport; diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index 395155548..335039e2f 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -261,6 +261,7 @@ void SysTick_Handler(void) { uint32_t board_millis(void) { return system_ticks; } +#endif //--------------------------------------------------------------------+ // @@ -344,6 +345,11 @@ static void max3421_init(void) { EIC->CONFIG[0].reg &= ~(7 << sense_shift); EIC->CONFIG[0].reg |= 2 << sense_shift; +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(EIC_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + // Enable External Interrupt EIC->INTENSET.reg = EIC_INTENSET_EXTINT(1 << MAX3421_INTR_EIC_ID); @@ -413,6 +419,3 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_l } #endif - - -#endif diff --git a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h index e3ee529cf..32db4ad95 100644 --- a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h @@ -59,7 +59,7 @@ #define configTICK_RATE_HZ ( 1000 ) #define configMAX_PRIORITIES ( 5 ) #define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*6*1024 ) #define configMAX_TASK_NAME_LEN 16 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index c1b914a02..7b9de35c9 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -175,6 +175,7 @@ void SysTick_Handler(void) { uint32_t board_millis(void) { return system_ticks; } +#endif //--------------------------------------------------------------------+ // API: SPI transfer with MAX3421E, must be implemented by application @@ -290,6 +291,11 @@ static void max3421_init(void) { *eic_config &= ~(7 << sense_shift); *eic_config |= 2 << sense_shift; +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(EIC_0_IRQn + MAX3421_INTR_EIC_ID, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + // Enable External Interrupt EIC->INTENSET.reg = EIC_INTENSET_EXTINT(1 << MAX3421_INTR_EIC_ID); @@ -360,5 +366,3 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_l } #endif - -#endif diff --git a/src/host/usbh.c b/src/host/usbh.c index dc2831da3..e332f35cc 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -659,7 +659,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result tusb_control_request_t const * request = &_ctrl_xfer.request; if (XFER_RESULT_SUCCESS != result) { - TU_LOG1("[%u:%u] Control %s, xferred_bytes = %u\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); + TU_LOG1("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); TU_LOG1_BUF(request, 8); TU_LOG1("\r\n"); -- cgit v1.3.1 From 6dc64eaa28ab905063233895345ba3c1186b836d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Sep 2023 12:33:36 +0700 Subject: max3421 communication work with esp32 up to enumeration, seems still have a bit of issue --- .idea/cmake.xml | 7 +++++++ examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 3 ++- hw/bsp/espressif/boards/family.c | 15 ++++++++++----- 4 files changed, 20 insertions(+), 7 deletions(-) (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 747f0fb58..ddeeb69fd 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -56,6 +56,13 @@ + + + + + + + \ No newline at end of file diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index fc2b1228d..943e534d8 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -68,7 +68,7 @@ void cdc_app_task(void* param) { } } - taskYIELD(); + vTaskDelay(1); } } diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index d5574789f..88e742ee2 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -40,6 +40,7 @@ #include "freertos/timers.h" #define USBH_STACK_SIZE 4096 + #define CDC_STACK_SZIE 2048 #else #include "FreeRTOS.h" #include "semphr.h" @@ -49,9 +50,9 @@ // Increase stack size when debug log is enabled #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) + #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) #endif -#define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPES diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index a04e1e7c5..5226f7e61 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -83,7 +83,6 @@ void board_init(void) { gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); -#if CFG_TUD_ENABLED // USB Controller Hal init periph_module_reset(PERIPH_USB_MODULE); periph_module_enable(PERIPH_USB_MODULE); @@ -93,7 +92,6 @@ void board_init(void) { }; usb_hal_init(&hal); configure_pins(&hal); -#endif #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); @@ -157,8 +155,9 @@ int board_uart_write(void const *buf, int len) { } int board_getchar(void) { - char c; - return (uart_read_bytes(UART_NUM_0, &c, 1, 0) > 0) ? (int) c : (-1); +// char c; +// return (uart_read_bytes(UART_NUM_0, &c, 1, 0) > 0) ? (int) c : (-1); + return -1; } //--------------------------------------------------------------------+ @@ -187,7 +186,7 @@ static void max3421_intr_task(void* param) { while (1) { xSemaphoreTake(max3421_intr_sem, portMAX_DELAY); - tuh_int_handler(BOARD_TUH_RHPORT); + hcd_int_handler_ext(BOARD_TUH_RHPORT, false); } } @@ -251,6 +250,12 @@ void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) { bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_len, uint8_t *rx_buf, size_t rx_len) { (void) rhport; + if (tx_len == 0) { + // fifo read, transmit rx_buf as dummy + tx_buf = rx_buf; + tx_len = rx_len; + } + spi_transaction_t xact = { .length = tx_len << 3, // length in bits .rxlength = rx_len << 3, // length in bits -- cgit v1.3.1 From 3b0ffd0f488671f1bafa4bcd9e22dd51f8bb6dee Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Sep 2023 15:51:03 +0700 Subject: change hcd_int_handler(rhport, in_isr) signature: add in_isr change tuh_int_handler() to take in_isr as optional parameter (default = true) --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/imxrt/family.c | 4 +- hw/bsp/kinetis_kl/family.c | 2 +- hw/bsp/kinetis_kl/family.cmake | 75 ++++++++++---------- .../lpc17/boards/lpcxpresso1769/lpcxpresso1769.c | 2 +- hw/bsp/lpc17/boards/mbed1768/mbed1768.c | 2 +- hw/bsp/lpc18/family.c | 55 ++++++--------- hw/bsp/lpc40/family.c | 2 +- hw/bsp/lpc43/family.c | 4 +- hw/bsp/msp432e4/family.c | 2 +- hw/bsp/ngx4330/ngx4330.c | 4 +- hw/bsp/nrf/family.c | 2 +- hw/bsp/ra/family.c | 6 +- hw/bsp/rx/boards/rx65n_target/rx65n_target.c | 2 +- hw/bsp/samd21/family.c | 2 +- hw/bsp/samd51/family.c | 2 +- hw/bsp/stm32g4/family.cmake | 81 +++++++++++----------- hw/bsp/tm4c123/family.c | 2 +- src/common/tusb_common.h | 2 - src/common/tusb_timeout.h | 80 --------------------- src/common/tusb_verify.h | 52 +++++--------- src/host/hcd.h | 2 +- src/host/usbh.h | 11 ++- src/portable/analog/max3421/hcd_max3421.c | 3 +- src/portable/ehci/ehci.c | 4 +- src/portable/mentor/musb/hcd_musb.c | 4 +- src/portable/nxp/khci/hcd_khci.c | 7 +- src/portable/ohci/ohci.c | 5 +- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 4 +- src/portable/renesas/rusb2/hcd_rusb2.c | 5 +- src/portable/template/hcd_template.c | 3 +- src/tusb.h | 4 +- 35 files changed, 172 insertions(+), 267 deletions(-) delete mode 100644 src/common/tusb_timeout.h (limited to 'examples/host') diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index ec95a8b24..32d89f794 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -188,7 +188,7 @@ void USB_OTG1_IRQHandler(void) #endif #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } @@ -199,7 +199,7 @@ void USB_OTG2_IRQHandler(void) #endif #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1); + tuh_int_handler(1, true); #endif } diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c index 3e9aa83a4..c436be3e6 100644 --- a/hw/bsp/kinetis_kl/family.c +++ b/hw/bsp/kinetis_kl/family.c @@ -39,7 +39,7 @@ void USB0_IRQHandler(void) { #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif #if CFG_TUD_ENABLED tud_int_handler(0); diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 793ef1783..4151979a0 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -22,48 +22,47 @@ set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/drivers/gpio/fsl_gpio.c - ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c - ${SDK_DIR}/drivers/uart/fsl_uart.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/gpio - ${SDK_DIR}/drivers/lpsci - ${SDK_DIR}/drivers/port - ${SDK_DIR}/drivers/smc - ${SDK_DIR}/drivers/uart - ) + if (TARGET ${BOARD_TARGET}) + return() + endif () - update_board(${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/drivers/gpio/fsl_gpio.c + ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c + ${SDK_DIR}/drivers/uart/fsl_uart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/gpio + ${SDK_DIR}/drivers/lpsci + ${SDK_DIR}/drivers/port + ${SDK_DIR}/drivers/smc + ${SDK_DIR}/drivers/uart + ) + update_board(${BOARD_TARGET}) - # LD_FILE and STARTUP_FILE can be defined in board.cmake + # LD_FILE and STARTUP_FILE can be defined in board.cmake + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c index c7d655368..8c26b906f 100644 --- a/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c @@ -37,7 +37,7 @@ void USB_IRQHandler(void) #endif #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } diff --git a/hw/bsp/lpc17/boards/mbed1768/mbed1768.c b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c index b2c92d640..613dcb570 100644 --- a/hw/bsp/lpc17/boards/mbed1768/mbed1768.c +++ b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c @@ -151,7 +151,7 @@ void USB_IRQHandler(void) #endif #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index b11f4fe0e..e6abecb4b 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -43,25 +43,23 @@ //--------------------------------------------------------------------+ // USB Interrupt Handler //--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ +void USB0_IRQHandler(void) { #if PORT_SUPPORT_DEVICE(0) - tud_int_handler(0); + tud_int_handler(0); #endif #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } -void USB1_IRQHandler(void) -{ +void USB1_IRQHandler(void) { #if PORT_SUPPORT_DEVICE(1) - tud_int_handler(1); + tud_int_handler(1); #endif #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1); + tuh_int_handler(1, true); #endif } @@ -74,28 +72,26 @@ const uint32_t OscRateIn = 12000000; const uint32_t ExtRateIn = 0; // Invoked by startup code -void SystemInit(void) -{ +void SystemInit(void) { #ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); + extern void (*const g_pfnVectors[])(void); unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; + *pSCB_VTOR = (unsigned int) g_pfnVectors; #endif board_lpc18_pinmux(); - #ifdef TRACE_ETM +#ifdef TRACE_ETM // Trace clock is limited to 60MHz, limit CPU clock to 120MHz Chip_SetupCoreClock(CLKIN_CRYSTAL, 120000000UL, true); - #else +#else // CPU clock max to 180 Mhz Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true); - #endif +#endif } -void board_init(void) -{ +void board_init(void) { SystemCoreClockUpdate(); #if CFG_TUSB_OS == OPT_OS_NONE @@ -135,27 +131,22 @@ void board_init(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ +void board_led_write(bool state) { Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); } -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { // active low return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; } -int board_uart_read(uint8_t* buf, int len) -{ +int board_uart_read(uint8_t *buf, int len) { return Chip_UART_Read(UART_DEV, buf, len); } -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; iINTFLAG.reg = EIC_INTFLAG_EXTINT(1 << MAX3421_INTR_EIC_ID); // Call the TinyUSB interrupt handler - tuh_int_handler(1); + tuh_int_handler(1, true); } void tuh_max3421_int_api(uint8_t rhport, bool enabled) { diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 2cf00c7af..268d60e48 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -296,7 +296,7 @@ void MAX3421_EIC_Handler(void) { EIC->INTFLAG.reg = EIC_INTFLAG_EXTINT(1 << MAX3421_INTR_EIC_ID); // Call the TinyUSB interrupt handler - tuh_int_handler(1); + tuh_int_handler(1, true); } void tuh_max3421_int_api(uint8_t rhport, bool enabled) { diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 675a96c74..f8cabcbe5 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -26,50 +26,47 @@ set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc - ) - target_compile_options(${BOARD_TARGET} PUBLIC + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + # nanolib + --specs=nosys.specs + --specs=nano.specs ) - target_compile_definitions(${BOARD_TARGET} PUBLIC + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c index ad5ae505f..738bc3fa0 100644 --- a/hw/bsp/tm4c123/family.c +++ b/hw/bsp/tm4c123/family.c @@ -8,7 +8,7 @@ void USB0_Handler(void) { #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif #if CFG_TUD_ENABLED diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 6fffed11c..caeb5f2ef 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -75,8 +75,6 @@ #include "tusb_types.h" #include "tusb_debug.h" -#include "tusb_timeout.h" // TODO remove - //--------------------------------------------------------------------+ // Optional API implemented by application if needed // TODO move to a more ovious place/file diff --git a/src/common/tusb_timeout.h b/src/common/tusb_timeout.h deleted file mode 100644 index 533e67ab8..000000000 --- a/src/common/tusb_timeout.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/** \ingroup Group_Common Common Files - * \defgroup Group_TimeoutTimer timeout timer - * @{ */ - -#ifndef _TUSB_TIMEOUT_H_ -#define _TUSB_TIMEOUT_H_ - -#include -#include - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct { - uint32_t start; - uint32_t interval; -}tu_timeout_t; - -#if 0 - -extern uint32_t tusb_hal_millis(void); - -static inline void tu_timeout_set(tu_timeout_t* tt, uint32_t msec) -{ - tt->interval = msec; - tt->start = tusb_hal_millis(); -} - -static inline bool tu_timeout_expired(tu_timeout_t* tt) -{ - return ( tusb_hal_millis() - tt->start ) >= tt->interval; -} - -// For used with periodic event to prevent drift -static inline void tu_timeout_reset(tu_timeout_t* tt) -{ - tt->start += tt->interval; -} - -static inline void tu_timeout_restart(tu_timeout_t* tt) -{ - tt->start = tusb_hal_millis(); -} - -#endif - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_TIMEOUT_H_ */ - -/** @} */ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 12355e8be..1b5f53dfc 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -56,12 +56,8 @@ * #define TU_VERIFY(cond) if(cond) return false; * #define TU_VERIFY(cond,ret) if(cond) return ret; * - * #define TU_VERIFY_HDLR(cond,handler) if(cond) {handler; return false;} - * #define TU_VERIFY_HDLR(cond,ret,handler) if(cond) {handler; return ret;} - * * #define TU_ASSERT(cond) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return false;} * #define TU_ASSERT(cond,ret) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return ret;} - * *------------------------------------------------------------------*/ #ifdef __cplusplus @@ -97,40 +93,23 @@ #define TU_BREAKPOINT() do {} while (0) #endif -/*------------------------------------------------------------------*/ -/* Macro Generator - *------------------------------------------------------------------*/ - // Helper to implement optional parameter for TU_VERIFY Macro family #define _GET_3RD_ARG(arg1, arg2, arg3, ...) arg3 -#define _GET_4TH_ARG(arg1, arg2, arg3, arg4, ...) arg4 - -/*------------- Generator for TU_VERIFY and TU_VERIFY_HDLR -------------*/ -#define TU_VERIFY_DEFINE(_cond, _handler, _ret) do \ -{ \ - if ( !(_cond) ) { _handler; return _ret; } \ -} while(0) /*------------------------------------------------------------------*/ /* TU_VERIFY * - TU_VERIFY_1ARGS : return false if failed * - TU_VERIFY_2ARGS : return provided value if failed *------------------------------------------------------------------*/ -#define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, , false) -#define TU_VERIFY_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, , _ret) +#define TU_VERIFY_DEFINE(_cond, _ret) \ + do { \ + if ( !(_cond) ) { return _ret; } \ + } while(0) -#define TU_VERIFY(...) _GET_3RD_ARG(__VA_ARGS__, TU_VERIFY_2ARGS, TU_VERIFY_1ARGS, UNUSED)(__VA_ARGS__) +#define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, false) +#define TU_VERIFY_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, _ret) - -/*------------------------------------------------------------------*/ -/* TU_VERIFY WITH HANDLER - * - TU_VERIFY_HDLR_2ARGS : execute handler, return false if failed - * - TU_VERIFY_HDLR_3ARGS : execute handler, return provided error if failed - *------------------------------------------------------------------*/ -#define TU_VERIFY_HDLR_2ARGS(_cond, _handler) TU_VERIFY_DEFINE(_cond, _handler, false) -#define TU_VERIFY_HDLR_3ARGS(_cond, _handler, _ret) TU_VERIFY_DEFINE(_cond, _handler, _ret) - -#define TU_VERIFY_HDLR(...) _GET_4TH_ARG(__VA_ARGS__, TU_VERIFY_HDLR_3ARGS, TU_VERIFY_HDLR_2ARGS,UNUSED)(__VA_ARGS__) +#define TU_VERIFY(...) _GET_3RD_ARG(__VA_ARGS__, TU_VERIFY_2ARGS, TU_VERIFY_1ARGS, _dummy)(__VA_ARGS__) /*------------------------------------------------------------------*/ /* ASSERT @@ -138,19 +117,20 @@ * - 1 arg : return false if failed * - 2 arg : return error if failed *------------------------------------------------------------------*/ -#define ASSERT_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, _MESS_FAILED(); TU_BREAKPOINT(), false) -#define ASSERT_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, _MESS_FAILED(); TU_BREAKPOINT(), _ret) +#define TU_ASSERT_DEFINE(_cond, _ret) \ + do { \ + if ( !(_cond) ) { _MESS_FAILED(); TU_BREAKPOINT(); return _ret; } \ + } while(0) + +#define TU_ASSERT_1ARGS(_cond) TU_ASSERT_DEFINE(_cond, false) +#define TU_ASSERT_2ARGS(_cond, _ret) TU_ASSERT_DEFINE(_cond, _ret) #ifndef TU_ASSERT -#define TU_ASSERT(...) _GET_3RD_ARG(__VA_ARGS__, ASSERT_2ARGS, ASSERT_1ARGS,UNUSED)(__VA_ARGS__) +#define TU_ASSERT(...) _GET_3RD_ARG(__VA_ARGS__, TU_ASSERT_2ARGS, TU_ASSERT_1ARGS, _dummy)(__VA_ARGS__) #endif -/*------------------------------------------------------------------*/ -/* ASSERT HDLR - *------------------------------------------------------------------*/ - #ifdef __cplusplus } #endif -#endif /* TUSB_VERIFY_H_ */ +#endif diff --git a/src/host/hcd.h b/src/host/hcd.h index e25b20ea3..2bde289df 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -131,7 +131,7 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_AT bool hcd_init(uint8_t rhport); // Interrupt Handler -void hcd_int_handler(uint8_t rhport); +void hcd_int_handler(uint8_t rhport, bool in_isr); // Enable USB interrupt void hcd_int_enable (uint8_t rhport); diff --git a/src/host/usbh.h b/src/host/usbh.h index 684e8240e..770d70dfe 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -124,11 +124,16 @@ void tuh_task(void) { bool tuh_task_event_ready(void); #ifndef _TUSB_HCD_H_ -extern void hcd_int_handler(uint8_t rhport); +extern void hcd_int_handler(uint8_t rhport, bool in_isr); #endif -// Interrupt handler, name alias to HCD -#define tuh_int_handler hcd_int_handler +// Interrupt handler alias to HCD with in_isr as optional parameter +// - tuh_int_handler(rhport) --> hcd_int_handler(rhport, true) +// - tuh_int_handler(rhport, in_isr) --> hcd_int_handler(rhport, in_isr) +// Note: this is similar to TU_VERIFY(), _GET_3RD_ARG() is defined in tusb_verify.h +#define _tuh_int_handler_1arg(_rhport) hcd_int_handler(_rhport, true) +#define _tuh_int_hanlder_2arg(_rhport, _in_isr) hcd_int_handler(_rhport, _in_isr) +#define tuh_int_handler(...) _GET_3RD_ARG(__VA_ARGS__, _tuh_int_hanlder_2arg, _tuh_int_handler_1arg, _dummy)(__VA_ARGS__) // Check if roothub port is initialized and active as a host bool tuh_rhport_is_active(uint8_t rhport); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 238b518a0..d013d6179 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -863,7 +863,8 @@ void print_hirq(uint8_t hirq) { #endif // Interrupt Handler -void hcd_int_handler(uint8_t rhport) { +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; uint8_t hirq = reg_read(rhport, HIRQ_ADDR, true) & _hcd_data.hien; if (!hirq) return; // print_hirq(hirq); diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index c93c33fc0..572b9826c 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -656,8 +656,8 @@ void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) } //------------- Host Controller Driver's Interrupt Handler -------------// -void hcd_int_handler(uint8_t rhport) -{ +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; ehci_registers_t* regs = ehci_data.regs; uint32_t const int_status = regs->status; diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 02090df85..5312c2812 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -847,8 +847,10 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { /*------------------------------------------------------------------- * ISR *-------------------------------------------------------------------*/ -void hcd_int_handler(uint8_t rhport) +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; + uint_fast8_t is, txis, rxis; is = USB0->IS; /* read and clear interrupt status */ diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 55327e02d..57684b259 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -447,6 +447,10 @@ void hcd_port_reset(uint8_t rhport) _hcd.need_reset = false; } +void hcd_port_reset_end(uint8_t rhport) { + (void) rhport; +} + tusb_speed_t hcd_port_speed_get(uint8_t rhport) { (void)rhport; @@ -583,8 +587,9 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { /*--------------------------------------------------------------------+ * ISR *--------------------------------------------------------------------+*/ -void hcd_int_handler(uint8_t rhport) +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; uint32_t is = KHCI->ISTAT; uint32_t msk = KHCI->INTEN; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 413e72037..f978b0965 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -667,8 +667,9 @@ static void done_queue_isr(uint8_t hostid) } } -void hcd_int_handler(uint8_t hostid) -{ +void hcd_int_handler(uint8_t hostid, bool in_isr) { + (void) in_isr; + uint32_t const int_en = OHCI_REG->interrupt_enable; uint32_t const int_status = OHCI_REG->interrupt_status & int_en; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 21dc3f67d..4ed6d36bb 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -252,9 +252,9 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) } } -void __tusb_irq_path_func(hcd_int_handler)(uint8_t rhport) -{ +void __tusb_irq_path_func(hcd_int_handler)(uint8_t rhport, bool in_isr) { (void) rhport; + (void) in_isr; hcd_rp2040_irq(); } diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 790cd6b32..bf95be707 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -771,8 +771,9 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { //--------------------------------------------------------------------+ // ISR //--------------------------------------------------------------------+ -void hcd_int_handler(uint8_t rhport) -{ +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; + rusb2_reg_t* rusb = RUSB2_REG(rhport); unsigned is0 = rusb->INTSTS0; unsigned is1 = rusb->INTSTS1; diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index 3e3b91558..b073d6057 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -51,8 +51,9 @@ bool hcd_init(uint8_t rhport) { } // Interrupt Handler -void hcd_int_handler(uint8_t rhport) { +void hcd_int_handler(uint8_t rhport, bool in_isr) { (void) rhport; + (void) in_isr; } // Enable USB interrupt diff --git a/src/tusb.h b/src/tusb.h index d6534ca28..c9d56d3c3 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -66,7 +66,7 @@ #endif #else #ifndef tuh_int_handler - #define tuh_int_handler(_x) + #define tuh_int_handler(...) #endif #endif @@ -123,7 +123,7 @@ #endif #else #ifndef tud_int_handler - #define tud_int_handler(_x) + #define tud_int_handler(...) #endif #endif -- cgit v1.3.1 From 277852afc1798f2acdb61917984e76b4bafa699e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 28 Sep 2023 10:56:38 +0700 Subject: fix esp32 msc example --- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 8 +- examples/host/cdc_msc_hid_freertos/src/hid_app.c | 4 + examples/host/cdc_msc_hid_freertos/src/main.c | 12 +- examples/host/cdc_msc_hid_freertos/src/msc_app.c | 8 +- src/class/msc/msc_host.c | 265 ++++++++++------------- src/class/msc/msc_host.h | 8 +- src/host/usbh.c | 22 +- 7 files changed, 151 insertions(+), 176 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 943e534d8..91dcc2e1a 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -31,9 +31,7 @@ // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ - -//------------- IMPLEMENTATION -------------// - +// helper size_t get_console_inputs(uint8_t *buf, size_t bufsize) { size_t count = 0; while (count < bufsize) { @@ -47,6 +45,10 @@ size_t get_console_inputs(uint8_t *buf, size_t bufsize) { return count; } +void cdc_app_init(void) { + // nothing to do +} + void cdc_app_task(void* param) { (void) param; diff --git a/examples/host/cdc_msc_hid_freertos/src/hid_app.c b/examples/host/cdc_msc_hid_freertos/src/hid_app.c index a2df3b909..9ea5c1be0 100644 --- a/examples/host/cdc_msc_hid_freertos/src/hid_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/hid_app.c @@ -48,6 +48,10 @@ static void process_kbd_report(hid_keyboard_report_t const *report); static void process_mouse_report(hid_mouse_report_t const *report); static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len); +void hid_app_init(void) { + // nothing to do +} + //--------------------------------------------------------------------+ // TinyUSB Callbacks //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 88e742ee2..b60be015b 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -82,10 +82,15 @@ StaticTask_t cdc_taskdef; TimerHandle_t blinky_tm; static void led_blinky_cb(TimerHandle_t xTimer); -static void usb_host_task(void* param); +extern void cdc_app_init(void); +extern void hid_app_init(void); +extern void msc_app_init(void); +static void usb_host_task(void* param); extern void cdc_app_task(void* param); + + /*------------- MAIN -------------*/ int main(void) { board_init(); @@ -131,6 +136,10 @@ static void usb_host_task(void *param) { board_init_after_tusb(); } + cdc_app_init(); + hid_app_init(); + msc_app_init(); + // RTOS forever loop while (1) { // put this thread to waiting state until there is new events @@ -154,7 +163,6 @@ void tuh_umount_cb(uint8_t dev_addr) { printf("A device with address %d is unmounted \r\n", dev_addr); } - //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index a8d6fbfaa..ee02ba917 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -25,10 +25,12 @@ #include "tusb.h" -#if CFG_TUH_MSC - static scsi_inquiry_resp_t inquiry_resp; +void msc_app_init(void) { + // nothing to do +} + bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_data) { msc_cbw_t const *cbw = cb_data->cbw; msc_csw_t const *csw = cb_data->csw; @@ -63,5 +65,3 @@ void tuh_msc_umount_cb(uint8_t dev_addr) { (void) dev_addr; printf("A MassStorage device is unmounted\r\n"); } - -#endif diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index da264142c..39f2d9f1c 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -43,16 +43,14 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ +enum { MSC_STAGE_IDLE = 0, MSC_STAGE_CMD, MSC_STAGE_DATA, MSC_STAGE_STATUS, }; -typedef struct -{ +typedef struct { uint8_t itf_num; uint8_t ep_in; uint8_t ep_out; @@ -69,13 +67,13 @@ typedef struct //------------- SCSI -------------// uint8_t stage; - void* buffer; + void* buffer; tuh_msc_complete_cb_t complete_cb; uintptr_t complete_arg; CFG_TUH_MEM_ALIGN msc_cbw_t cbw; CFG_TUH_MEM_ALIGN msc_csw_t csw; -}msch_interface_t; +} msch_interface_t; CFG_TUH_MEM_SECTION static msch_interface_t _msch_itf[CFG_TUH_DEVICE_MAX]; @@ -86,40 +84,34 @@ static uint8_t _msch_buffer[sizeof(scsi_inquiry_resp_t)]; // FIXME potential nul reference TU_ATTR_ALWAYS_INLINE -static inline msch_interface_t* get_itf(uint8_t dev_addr) -{ - return &_msch_itf[dev_addr-1]; +static inline msch_interface_t* get_itf(uint8_t dev_addr) { + return &_msch_itf[dev_addr - 1]; } //--------------------------------------------------------------------+ // PUBLIC API //--------------------------------------------------------------------+ -uint8_t tuh_msc_get_maxlun(uint8_t dev_addr) -{ +uint8_t tuh_msc_get_maxlun(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->max_lun; } -uint32_t tuh_msc_get_block_count(uint8_t dev_addr, uint8_t lun) -{ +uint32_t tuh_msc_get_block_count(uint8_t dev_addr, uint8_t lun) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->capacity[lun].block_count; } -uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun) -{ +uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->capacity[lun].block_size; } -bool tuh_msc_mounted(uint8_t dev_addr) -{ +bool tuh_msc_mounted(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->mounted; } -bool tuh_msc_ready(uint8_t dev_addr) -{ +bool tuh_msc_ready(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->mounted && !usbh_edpt_busy(dev_addr, p_msc->ep_in) && !usbh_edpt_busy(dev_addr, p_msc->ep_out); } @@ -127,20 +119,20 @@ bool tuh_msc_ready(uint8_t dev_addr) //--------------------------------------------------------------------+ // PUBLIC API: SCSI COMMAND //--------------------------------------------------------------------+ -static inline void cbw_init(msc_cbw_t *cbw, uint8_t lun) -{ +static inline void cbw_init(msc_cbw_t* cbw, uint8_t lun) { tu_memclr(cbw, sizeof(msc_cbw_t)); cbw->signature = MSC_CBW_SIGNATURE; cbw->tag = 0x54555342; // TUSB cbw->lun = lun; } -bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ - msch_interface_t* p_msc = get_itf(dev_addr); +bool tuh_msc_scsi_command(uint8_t daddr, msc_cbw_t const* cbw, void* data, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { + msch_interface_t* p_msc = get_itf(daddr); TU_VERIFY(p_msc->configured); - // TODO claim endpoint + // claim endpoint + TU_VERIFY(usbh_edpt_claim(daddr, p_msc->ep_out)); p_msc->cbw = *cbw; p_msc->stage = MSC_STAGE_CMD; @@ -148,15 +140,18 @@ bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tu p_msc->complete_cb = complete_cb; p_msc->complete_arg = arg; - TU_ASSERT(usbh_edpt_xfer(dev_addr, p_msc->ep_out, (uint8_t*) &p_msc->cbw, sizeof(msc_cbw_t))); + if (!usbh_edpt_xfer(daddr, p_msc->ep_out, (uint8_t*) &p_msc->cbw, sizeof(msc_cbw_t))) { + usbh_edpt_release(daddr, p_msc->ep_out); + return false; + } return true; } -bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_resp_t* response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ - msch_interface_t* p_msc = get_itf(dev_addr); - TU_VERIFY(p_msc->configured); +bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_resp_t* response, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { + msch_interface_t* p_msc = get_itf(dev_addr); + TU_VERIFY(p_msc->configured); msc_cbw_t cbw; cbw_init(&cbw, lun); @@ -169,8 +164,8 @@ bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_r return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } -bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->mounted); @@ -181,18 +176,16 @@ bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* respons cbw.dir = TUSB_DIR_IN_MASK; cbw.cmd_len = sizeof(scsi_inquiry_t); - scsi_inquiry_t const cmd_inquiry = - { - .cmd_code = SCSI_CMD_INQUIRY, - .alloc_length = sizeof(scsi_inquiry_resp_t) + scsi_inquiry_t const cmd_inquiry = { + .cmd_code = SCSI_CMD_INQUIRY, + .alloc_length = sizeof(scsi_inquiry_resp_t) }; memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } -bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->configured); @@ -200,16 +193,16 @@ bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_ cbw_init(&cbw, lun); cbw.total_bytes = 0; - cbw.dir = TUSB_DIR_OUT; - cbw.cmd_len = sizeof(scsi_test_unit_ready_t); - cbw.command[0] = SCSI_CMD_TEST_UNIT_READY; - cbw.command[1] = lun; // according to wiki TODO need verification + cbw.dir = TUSB_DIR_OUT; + cbw.cmd_len = sizeof(scsi_test_unit_ready_t); + cbw.command[0] = SCSI_CMD_TEST_UNIT_READY; + cbw.command[1] = lun; // according to wiki TODO need verification return tuh_msc_scsi_command(dev_addr, &cbw, NULL, complete_cb, arg); } -bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void* response, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msc_cbw_t cbw; cbw_init(&cbw, lun); @@ -217,73 +210,64 @@ bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *response, tuh_ms cbw.dir = TUSB_DIR_IN_MASK; cbw.cmd_len = sizeof(scsi_request_sense_t); - scsi_request_sense_t const cmd_request_sense = - { - .cmd_code = SCSI_CMD_REQUEST_SENSE, - .alloc_length = 18 + scsi_request_sense_t const cmd_request_sense = { + .cmd_code = SCSI_CMD_REQUEST_SENSE, + .alloc_length = 18 }; - memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } -bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void* buffer, uint32_t lba, uint16_t block_count, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->mounted); msc_cbw_t cbw; cbw_init(&cbw, lun); - cbw.total_bytes = block_count*p_msc->capacity[lun].block_size; - cbw.dir = TUSB_DIR_IN_MASK; - cbw.cmd_len = sizeof(scsi_read10_t); + cbw.total_bytes = block_count * p_msc->capacity[lun].block_size; + cbw.dir = TUSB_DIR_IN_MASK; + cbw.cmd_len = sizeof(scsi_read10_t); - scsi_read10_t const cmd_read10 = - { - .cmd_code = SCSI_CMD_READ_10, - .lba = tu_htonl(lba), - .block_count = tu_htons(block_count) + scsi_read10_t const cmd_read10 = { + .cmd_code = SCSI_CMD_READ_10, + .lba = tu_htonl(lba), + .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_read10, cbw.cmd_len); return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } -bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const* buffer, uint32_t lba, uint16_t block_count, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->mounted); msc_cbw_t cbw; cbw_init(&cbw, lun); - cbw.total_bytes = block_count*p_msc->capacity[lun].block_size; + cbw.total_bytes = block_count * p_msc->capacity[lun].block_size; cbw.dir = TUSB_DIR_OUT; cbw.cmd_len = sizeof(scsi_write10_t); - scsi_write10_t const cmd_write10 = - { - .cmd_code = SCSI_CMD_WRITE_10, - .lba = tu_htonl(lba), - .block_count = tu_htons(block_count) + scsi_write10_t const cmd_write10 = { + .cmd_code = SCSI_CMD_WRITE_10, + .lba = tu_htonl(lba), + .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_write10, cbw.cmd_len); - return tuh_msc_scsi_command(dev_addr, &cbw, (void*)(uintptr_t) buffer, complete_cb, arg); + return tuh_msc_scsi_command(dev_addr, &cbw, (void*) (uintptr_t) buffer, complete_cb, arg); } #if 0 // MSC interface Reset (not used now) -bool tuh_msc_reset(uint8_t dev_addr) -{ - tusb_control_request_t const new_request = - { - .bmRequestType_bit = - { +bool tuh_msc_reset(uint8_t dev_addr) { + tusb_control_request_t const new_request = { + .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_INTERFACE, .type = TUSB_REQ_TYPE_CLASS, .direction = TUSB_DIR_OUT @@ -300,79 +284,71 @@ bool tuh_msc_reset(uint8_t dev_addr) //--------------------------------------------------------------------+ // CLASS-USBH API //--------------------------------------------------------------------+ -void msch_init(void) -{ +void msch_init(void) { tu_memclr(_msch_itf, sizeof(_msch_itf)); } -void msch_close(uint8_t dev_addr) -{ - TU_VERIFY(dev_addr <= CFG_TUH_DEVICE_MAX, ); +void msch_close(uint8_t dev_addr) { + TU_VERIFY(dev_addr <= CFG_TUH_DEVICE_MAX,); msch_interface_t* p_msc = get_itf(dev_addr); - TU_VERIFY(p_msc->configured, ); + TU_VERIFY(p_msc->configured,); TU_LOG_DRV(" MSCh close addr = %d\r\n", dev_addr); // invoke Application Callback if (p_msc->mounted) { - if(tuh_msc_umount_cb) tuh_msc_umount_cb(dev_addr); + if (tuh_msc_umount_cb) tuh_msc_umount_cb(dev_addr); } tu_memclr(p_msc, sizeof(msch_interface_t)); } -bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes) -{ +bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes) { msch_interface_t* p_msc = get_itf(dev_addr); msc_cbw_t const * cbw = &p_msc->cbw; msc_csw_t * csw = &p_msc->csw; - switch (p_msc->stage) - { + switch (p_msc->stage) { case MSC_STAGE_CMD: // Must be Command Block - TU_ASSERT(ep_addr == p_msc->ep_out && event == XFER_RESULT_SUCCESS && xferred_bytes == sizeof(msc_cbw_t)); + TU_ASSERT(ep_addr == p_msc->ep_out && event == XFER_RESULT_SUCCESS && xferred_bytes == sizeof(msc_cbw_t)); - if ( cbw->total_bytes && p_msc->buffer ) - { + if (cbw->total_bytes && p_msc->buffer) { // Data stage if any p_msc->stage = MSC_STAGE_DATA; - uint8_t const ep_data = (cbw->dir & TUSB_DIR_IN_MASK) ? p_msc->ep_in : p_msc->ep_out; TU_ASSERT(usbh_edpt_xfer(dev_addr, ep_data, p_msc->buffer, (uint16_t) cbw->total_bytes)); - }else - { + } else { // Status stage p_msc->stage = MSC_STAGE_STATUS; TU_ASSERT(usbh_edpt_xfer(dev_addr, p_msc->ep_in, (uint8_t*) &p_msc->csw, (uint16_t) sizeof(msc_csw_t))); } - break; + break; case MSC_STAGE_DATA: // Status stage p_msc->stage = MSC_STAGE_STATUS; TU_ASSERT(usbh_edpt_xfer(dev_addr, p_msc->ep_in, (uint8_t*) &p_msc->csw, (uint16_t) sizeof(msc_csw_t))); - break; + break; case MSC_STAGE_STATUS: // SCSI op is complete p_msc->stage = MSC_STAGE_IDLE; - if (p_msc->complete_cb) - { - tuh_msc_complete_data_t const cb_data = - { - .cbw = cbw, - .csw = csw, - .scsi_data = p_msc->buffer, - .user_arg = p_msc->complete_arg + if (p_msc->complete_cb) { + tuh_msc_complete_data_t const cb_data = { + .cbw = cbw, + .csw = csw, + .scsi_data = p_msc->buffer, + .user_arg = p_msc->complete_arg }; p_msc->complete_cb(dev_addr, &cb_data); } - break; + break; - // unknown state - default: break; + // unknown state + default: + break; } return true; @@ -381,39 +357,35 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32 //--------------------------------------------------------------------+ // MSC Enumeration //--------------------------------------------------------------------+ - -static void config_get_maxlun_complete (tuh_xfer_t* xfer); -static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data); +static void config_get_maxlun_complete(tuh_xfer_t* xfer); +static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data); static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data); static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data); -bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) -{ +bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const* desc_itf, uint16_t max_len) { (void) rhport; TU_VERIFY (MSC_SUBCLASS_SCSI == desc_itf->bInterfaceSubClass && - MSC_PROTOCOL_BOT == desc_itf->bInterfaceProtocol); + MSC_PROTOCOL_BOT == desc_itf->bInterfaceProtocol); // msc driver length is fixed - uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); + uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); TU_ASSERT(drv_len <= max_len); msch_interface_t* p_msc = get_itf(dev_addr); - tusb_desc_endpoint_t const * ep_desc = (tusb_desc_endpoint_t const *) tu_desc_next(desc_itf); + tusb_desc_endpoint_t const* ep_desc = (tusb_desc_endpoint_t const*) tu_desc_next(desc_itf); - for(uint32_t i=0; i<2; i++) - { + for (uint32_t i = 0; i < 2; i++) { TU_ASSERT(TUSB_DESC_ENDPOINT == ep_desc->bDescriptorType && TUSB_XFER_BULK == ep_desc->bmAttributes.xfer); TU_ASSERT(tuh_edpt_open(dev_addr, ep_desc)); - if ( tu_edpt_dir(ep_desc->bEndpointAddress) == TUSB_DIR_IN ) - { + if (TUSB_DIR_IN == tu_edpt_dir(ep_desc->bEndpointAddress)) { p_msc->ep_in = ep_desc->bEndpointAddress; - }else - { + } else { p_msc->ep_out = ep_desc->bEndpointAddress; } - ep_desc = (tusb_desc_endpoint_t const *) tu_desc_next(ep_desc); + ep_desc = (tusb_desc_endpoint_t const*) tu_desc_next(ep_desc); } p_msc->itf_num = desc_itf->bInterfaceNumber; @@ -430,32 +402,31 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) { //------------- Get Max Lun -------------// TU_LOG_DRV("MSC Get Max Lun\r\n"); tusb_control_request_t const request = { - .bmRequestType_bit = { - .recipient = TUSB_REQ_RCPT_INTERFACE, - .type = TUSB_REQ_TYPE_CLASS, - .direction = TUSB_DIR_IN - }, - .bRequest = MSC_REQ_GET_MAX_LUN, - .wValue = 0, - .wIndex = itf_num, - .wLength = 1 + .bmRequestType_bit = { + .recipient = TUSB_REQ_RCPT_INTERFACE, + .type = TUSB_REQ_TYPE_CLASS, + .direction = TUSB_DIR_IN + }, + .bRequest = MSC_REQ_GET_MAX_LUN, + .wValue = 0, + .wIndex = itf_num, + .wLength = 1 }; tuh_xfer_t xfer = { - .daddr = dev_addr, - .ep_addr = 0, - .setup = &request, - .buffer = _msch_buffer, - .complete_cb = config_get_maxlun_complete, - .user_data = 0 + .daddr = dev_addr, + .ep_addr = 0, + .setup = &request, + .buffer = _msch_buffer, + .complete_cb = config_get_maxlun_complete, + .user_data = 0 }; TU_ASSERT(tuh_control_xfer(&xfer)); return true; } -static void config_get_maxlun_complete (tuh_xfer_t* xfer) -{ +static void config_get_maxlun_complete(tuh_xfer_t* xfer) { uint8_t const daddr = xfer->daddr; msch_interface_t* p_msc = get_itf(daddr); @@ -471,18 +442,16 @@ static void config_get_maxlun_complete (tuh_xfer_t* xfer) tuh_msc_test_unit_ready(daddr, lun, config_test_unit_ready_complete, 0); } -static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; - if (csw->status == 0) - { + if (csw->status == 0) { // Unit is ready, read its capacity TU_LOG_DRV("SCSI Read Capacity\r\n"); - tuh_msc_read_capacity(dev_addr, cbw->lun, (scsi_read_capacity10_resp_t*) ((void*) _msch_buffer), config_read_capacity_complete, 0); - }else - { + tuh_msc_read_capacity(dev_addr, cbw->lun, (scsi_read_capacity10_resp_t*) ((void*) _msch_buffer), + config_read_capacity_complete, 0); + } else { // Note: During enumeration, some device fails Test Unit Ready and require a few retries // with Request Sense to start working !! // TODO limit number of retries @@ -493,8 +462,7 @@ static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_d return true; } -static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; @@ -503,8 +471,7 @@ static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_dat return true; } -static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h index 6c0e5c9dd..9ca1b4703 100644 --- a/src/class/msc/msc_host.h +++ b/src/class/msc/msc_host.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_MSC_HOST_H_ -#define _TUSB_MSC_HOST_H_ +#ifndef TUSB_MSC_HOST_H_ +#define TUSB_MSC_HOST_H_ #include "msc.h" @@ -73,7 +73,7 @@ uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun); // Perform a full SCSI command (cbw, data, csw) in non-blocking manner. // Complete callback is invoked when SCSI op is complete. // return true if success, false if there is already pending operation. -bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); +bool tuh_msc_scsi_command(uint8_t daddr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); // Perform SCSI Inquiry command // Complete callback is invoked when SCSI op is complete. @@ -123,4 +123,4 @@ bool msch_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, ui } #endif -#endif /* _TUSB_MSC_HOST_H_ */ +#endif diff --git a/src/host/usbh.c b/src/host/usbh.c index e332f35cc..8d75c9726 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -817,6 +817,7 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) } // Submit an transfer +// TODO call usbh_edpt_release if failed bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { @@ -1713,19 +1714,16 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur return true; } -void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) -{ +void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { usbh_device_t* dev = get_device(dev_addr); - for(itf_num++; itf_num < CFG_TUH_INTERFACE_MAX; itf_num++) - { + for(itf_num++; itf_num < CFG_TUH_INTERFACE_MAX; itf_num++) { // continue with next valid interface // IAD binding interface such as CDCs should return itf_num + 1 when complete // with usbh_driver_set_config_complete() uint8_t const drv_id = dev->itf2drv[itf_num]; usbh_class_driver_t const * driver = get_driver(drv_id); - if (driver) - { + if (driver) { TU_LOG_USBH("%s set config: itf = %u\r\n", driver->name, itf_num); driver->set_config(dev_addr, itf_num); break; @@ -1733,23 +1731,19 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) } // all interface are configured - if (itf_num == CFG_TUH_INTERFACE_MAX) - { + if (itf_num == CFG_TUH_INTERFACE_MAX) { enum_full_complete(); - if (is_hub_addr(dev_addr)) - { + if (is_hub_addr(dev_addr)) { TU_LOG(CFG_TUH_LOG_LEVEL, "HUB address = %u is mounted\r\n", dev_addr); - }else - { + }else { // Invoke callback if available if (tuh_mount_cb) tuh_mount_cb(dev_addr); } } } -static void enum_full_complete(void) -{ +static void enum_full_complete(void) { // mark enumeration as complete _dev0.enumerating = 0; -- cgit v1.3.1 From 7dc1a66f917408992cf672009a307f7200a3fd32 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 28 Sep 2023 11:12:22 +0700 Subject: esp32 cdc host with max3421 work well --- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 44 +++++++++++++++++++++--- examples/host/cdc_msc_hid_freertos/src/main.c | 16 ++------- hw/bsp/espressif/boards/family.c | 20 ++++++++--- 3 files changed, 58 insertions(+), 22 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 91dcc2e1a..6ff513be1 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,9 +27,43 @@ #include "tusb.h" #include "bsp/board_api.h" +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +// ESP-IDF need "freertos/" prefix in include path. +// CFG_TUSB_OS_INC_PATH should be defined accordingly. + #include "freertos/FreeRTOS.h" + #include "freertos/semphr.h" + #include "freertos/queue.h" + #include "freertos/task.h" + #include "freertos/timers.h" + + #define CDC_STACK_SZIE 2048 +#else + #include "FreeRTOS.h" + #include "semphr.h" + #include "queue.h" + #include "task.h" + #include "timers.h" + + #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) +#endif + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ +#if configSUPPORT_STATIC_ALLOCATION +StackType_t cdc_stack[CDC_STACK_SZIE]; +StaticTask_t cdc_taskdef; +#endif + +static void cdc_app_task(void* param); + +void cdc_app_init(void) { + #if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + #else + xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); + #endif +} // helper size_t get_console_inputs(uint8_t *buf, size_t bufsize) { @@ -45,11 +79,7 @@ size_t get_console_inputs(uint8_t *buf, size_t bufsize) { return count; } -void cdc_app_init(void) { - // nothing to do -} - -void cdc_app_task(void* param) { +static void cdc_app_task(void* param) { (void) param; uint8_t buf[64 + 1]; // +1 for extra null character @@ -74,6 +104,10 @@ void cdc_app_task(void* param) { } } +//--------------------------------------------------------------------+ +// TinyUSB Callbacks +//--------------------------------------------------------------------+ + // Invoked when received new data void tuh_cdc_rx_cb(uint8_t idx) { uint8_t buf[64 + 1]; // +1 for extra null character diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index b60be015b..691ff3e29 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -40,7 +40,6 @@ #include "freertos/timers.h" #define USBH_STACK_SIZE 4096 - #define CDC_STACK_SZIE 2048 #else #include "FreeRTOS.h" #include "semphr.h" @@ -50,7 +49,6 @@ // Increase stack size when debug log is enabled #define USBH_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) - #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) #endif @@ -74,38 +72,30 @@ StaticTimer_t blinky_tmdef; StackType_t usb_host_stack[USBH_STACK_SIZE]; StaticTask_t usb_host_taskdef; - -StackType_t cdc_stack[CDC_STACK_SZIE]; -StaticTask_t cdc_taskdef; #endif TimerHandle_t blinky_tm; static void led_blinky_cb(TimerHandle_t xTimer); +static void usb_host_task(void* param); + extern void cdc_app_init(void); extern void hid_app_init(void); extern void msc_app_init(void); -static void usb_host_task(void* param); -extern void cdc_app_task(void* param); - - - /*------------- MAIN -------------*/ int main(void) { board_init(); printf("TinyUSB Host CDC MSC HID with FreeRTOS Example\r\n"); - // Create soft timer for blinky, task for tinyusb stack and CDC + // Create soft timer for blinky, task for tinyusb stack #if configSUPPORT_STATIC_ALLOCATION blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef); - xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); #else blinky_tm = xTimerCreate(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb); xTaskCreate(usb_host_task, "usbd", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, NULL); - xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); #endif xTimerStart(blinky_tm, 0); diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 4d2cab9e8..e45765fd1 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -41,6 +41,8 @@ #include "driver/periph_ctrl.h" #endif +#define UART_ID UART_NUM_0 + #ifdef NEOPIXEL_PIN #include "led_strip.h" static led_strip_t *strip; @@ -59,6 +61,17 @@ static void configure_pins(usb_hal_context_t *usb); // Initialize on-board peripherals : led, button, uart and USB void board_init(void) { + // uart init + uart_config_t uart_config = { + .baud_rate = 115200, + .data_bits = UART_DATA_8_BITS, + .parity = UART_PARITY_DISABLE, + .stop_bits = UART_STOP_BITS_1, + .flow_ctrl = UART_HW_FLOWCTRL_DISABLE + }; + uart_driver_install(UART_ID, 1024, 0, 0, NULL, 0); + uart_param_config(UART_ID, &uart_config); + #ifdef NEOPIXEL_PIN #ifdef NEOPIXEL_POWER_PIN gpio_reset_pin(NEOPIXEL_POWER_PIN); @@ -144,7 +157,7 @@ uint32_t board_button_read(void) { // Get characters from UART int board_uart_read(uint8_t *buf, int len) { - return uart_read_bytes(UART_NUM_0, buf, len, 0); + return uart_read_bytes(UART_ID, buf, len, 0); } // Send characters to UART @@ -155,9 +168,8 @@ int board_uart_write(void const *buf, int len) { } int board_getchar(void) { -// char c; -// return (uart_read_bytes(UART_NUM_0, &c, 1, 0) > 0) ? (int) c : (-1); - return -1; + char c; + return (uart_read_bytes(UART_ID, &c, 1, 0) > 0) ? (int) c : (-1); } //--------------------------------------------------------------------+ -- cgit v1.3.1 From 6b8933cfe838b369c58d4fc9ced8aa5c9382a6d6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 28 Sep 2023 12:55:59 +0700 Subject: fix build with new freertos host example --- examples/device/cdc_msc_freertos/Makefile | 2 - examples/host/bare_api/Makefile | 10 - examples/host/cdc_msc_hid/Makefile | 10 - examples/host/cdc_msc_hid_freertos/Makefile | 18 +- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 215 +++++++++++++++++++++ examples/host/hid_controller/Makefile | 10 - examples/host/msc_file_explorer/Makefile | 10 - hw/bsp/lpc17/family.mk | 4 +- src/portable/analog/max3421/hcd_max3421.c | 4 +- src/tinyusb.mk | 7 + 10 files changed, 237 insertions(+), 53 deletions(-) create mode 100644 examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h (limited to 'examples/host') diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 3ac62a79c..84c833fb5 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,5 +1,3 @@ -DEPS_SUBMODULES += lib/FreeRTOS-Kernel - include ../../make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile index 058307c40..161f8c774 100644 --- a/examples/host/bare_api/Makefile +++ b/examples/host/bare_api/Makefile @@ -10,14 +10,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# TinyUSB Host Stack source -SRC_C += \ - src/class/cdc/cdc_host.c \ - src/class/hid/hid_host.c \ - src/class/msc/msc_host.c \ - src/host/hub.c \ - src/host/usbh.c \ - src/portable/ohci/ohci.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c - include ../../rules.mk diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index 7c16b39d3..15b8a5b31 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -13,14 +13,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# TinyUSB Host Stack source -SRC_C += \ - src/class/cdc/cdc_host.c \ - src/class/hid/hid_host.c \ - src/class/msc/msc_host.c \ - src/host/hub.c \ - src/host/usbh.c \ - src/portable/ohci/ohci.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c - include ../../rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index 67bb6da55..a9670b4f2 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -5,6 +5,7 @@ FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) INC += \ src \ + src/FreeRTOSConfig \ $(TOP)/hw \ $(TOP)/$(FREERTOS_SRC)/include \ $(TOP)/$(FREERTOS_PORTABLE_SRC) \ @@ -19,14 +20,15 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -# TinyUSB Host Stack source +# FreeRTOS source, all files in port folder SRC_C += \ - src/class/cdc/cdc_host.c \ - src/class/hid/hid_host.c \ - src/class/msc/msc_host.c \ - src/host/hub.c \ - src/host/usbh.c \ - src/portable/ohci/ohci.c \ - src/portable/nxp/lpc17_40/hcd_lpc17_40.c + $(FREERTOS_SRC)/list.c \ + $(FREERTOS_SRC)/queue.c \ + $(FREERTOS_SRC)/tasks.c \ + $(FREERTOS_SRC)/timers.c \ + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.c)) + +SRC_S += \ + $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) include ../../rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..a1fc8bb09 --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,215 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + +// Include MCU header +#include "bsp/board_mcu.h" + +#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 + #error "ESP32-Sx should use IDF's FreeRTOSConfig.h" +#endif + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + +// TODO fix later +// FIXME cause redundant-decls warnings +#if CFG_TUSB_MCU == OPT_MCU_MM32F327X + extern u32 SystemCoreClock; +#else + extern uint32_t SystemCoreClock; +#endif + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 0 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +#ifdef __RX__ +/* Renesas RX series */ +#define vSoftwareInterruptISR INT_Excep_ICU_SWINT +#define vTickISR INT_Excep_CMT0_CMI0 +#define configPERIPHERAL_CLOCK_HZ (configCPU_CLOCK_HZ/2) +#define configKERNEL_INTERRUPT_PRIORITY 1 +#define configMAX_SYSCALL_INTERRUPT_PRIORITY 4 + +#else + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ +#if defined(__NVIC_PRIO_BITS) + // For Cortex-M specific: __NVIC_PRIO_BITS is defined in core_cmx.h + #define configPRIO_BITS __NVIC_PRIO_BITS + +#elif defined(__ECLIC_INTCTLBITS) + // RISC-V Bumblebee core from nuclei + #define configPRIO_BITS __ECLIC_INTCTLBITS + +#elif defined(__IASMARM__) + // FIXME: IAR Assembler cannot include mcu header directly to get __NVIC_PRIO_BITS. + // Therefore we will hard coded it to minimum value of 2 to get pass ci build. + // IAR user must update this to correct value of the target MCU + #message "configPRIO_BITS is hard coded to 2 to pass IAR build only. User should update it per MCU" + #define configPRIO_BITS 2 + +#else + #error "FreeRTOS configPRIO_BITS to be defined" +#endif + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< Date: Mon, 20 Nov 2023 22:09:38 +0700 Subject: update example to work with featherwing max3421, set max3421 GPIO0 for vbus tested with feather nrf52840, m0, m4 --- .idea/cmake.xml | 2 ++ examples/host/cdc_msc_hid/src/main.c | 30 +++++++++++++--------- examples/host/cdc_msc_hid_freertos/src/main.c | 12 +++++++++ hw/bsp/nrf/boards/feather_nrf52840_express/board.h | 4 +-- hw/bsp/nrf/family.c | 2 -- hw/bsp/samd21/boards/feather_m0_express/board.h | 15 +++++++++++ hw/bsp/samd51/family.c | 15 ----------- 7 files changed, 49 insertions(+), 31 deletions(-) (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 311c3ccb9..97e503033 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -40,7 +40,9 @@ + + diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 405bf8c06..a3b80e030 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -34,13 +34,17 @@ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); - extern void cdc_app_task(void); extern void hid_app_task(void); +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +// API to read/rite MAX3421's register. Implemented by TinyUSB +extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); +extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); +#endif + /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host CDC MSC HID Example\r\n"); @@ -52,8 +56,13 @@ int main(void) board_init_after_tusb(); } - while (1) - { +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable + enum { IOPINS1_ADDR = 20u << 3, /* 0xA0 */ }; + tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false); +#endif + + while (1) { // tinyusb host task tuh_task(); @@ -67,14 +76,12 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { // application set-up printf("A device with address %d is mounted\r\n", dev_addr); } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { // application tear-down printf("A device with address %d is unmounted \r\n", dev_addr); } @@ -83,15 +90,14 @@ void tuh_umount_cb(uint8_t dev_addr) //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 691ff3e29..069cbdc90 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -83,6 +83,12 @@ extern void cdc_app_init(void); extern void hid_app_init(void); extern void msc_app_init(void); +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +// API to read/rite MAX3421's register. Implemented by TinyUSB +extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); +extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); +#endif + /*------------- MAIN -------------*/ int main(void) { board_init(); @@ -126,6 +132,12 @@ static void usb_host_task(void *param) { board_init_after_tusb(); } +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 + // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable + enum { IOPINS1_ADDR = 20u << 3, /* 0xA0 */ }; + tuh_max3421_reg_write(BOARD_TUH_RHPORT, IOPINS1_ADDR, 0x01, false); +#endif + cdc_app_init(); hid_app_init(); msc_app_init(); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 3d59516d8..22946422b 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -49,8 +49,8 @@ #define MAX3421_SCK_PIN 14 #define MAX3421_MOSI_PIN 13 #define MAX3421_MISO_PIN 15 -#define MAX3421_CS_PIN 27 // D10 -#define MAX3421_INTR_PIN 26 // D9 +#define MAX3421_CS_PIN 6 // D11 +#define MAX3421_INTR_PIN 27 // D10 #ifdef __cplusplus } diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index c431389f3..6e0cd85c3 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -95,9 +95,7 @@ TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) { //------------- Host using MAX2341E -------------// #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 - static void max3421_init(void); - static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(1); #endif diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h index 8e0caa6bd..fd3d16aaa 100644 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ b/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -43,6 +43,21 @@ #define UART_RX_PIN 4 #define UART_TX_PIN 5 +// SPI for USB host shield +#define MAX3421_SERCOM_ID 4 // SERCOM4 +#define MAX3421_SERCOM_FUNCTION 3 // function D (Sercom Alt) + +#define MAX3421_SCK_PIN (32+11) +#define MAX3421_MOSI_PIN (32+10) +#define MAX3421_MISO_PIN 12 +#define MAX3421_TX_PAD 1 // MOSI = PAD_2, SCK = PAD_3 +#define MAX3421_RX_PAD 0 // MISO = PAD_2 + +#define MAX3421_CS_PIN 16 // D11 + +#define MAX3421_INTR_PIN 18 // D10 +#define MAX3421_INTR_EIC_ID 2 // EIC2 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 2a2aee982..009a0d290 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -78,12 +78,6 @@ void USB_3_Handler(void) { #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 -// API to read MAX3421's register. Implemented by TinyUSB -extern uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); - -// API to write MAX3421's register. Implemented by TinyUSB -extern bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); - #define MAX3421_SERCOM TU_XSTRCAT(SERCOM, MAX3421_SERCOM_ID) #define MAX3421_EIC_Handler TU_XSTRCAT3(EIC_, MAX3421_INTR_EIC_ID, _Handler) @@ -148,15 +142,6 @@ void board_init(void) { } void board_init_after_tusb(void) { -#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 - // FeatherWing MAX3421E use MAX3421E's GPIO0 for VBUS enable - enum { - IOPINS1_ADDR = 20u << 3, // 0xA0 - }; - - uint8_t rhport = 1; - tuh_max3421_reg_write(rhport, IOPINS1_ADDR, 0x01, false); -#endif } //--------------------------------------------------------------------+ -- cgit v1.3.1 From aedc92f2d31af6209b00e8a5d7abbfec02ed979b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Nov 2023 11:25:55 +0700 Subject: fix typo in cdc line coding enum --- examples/host/cdc_msc_hid/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- src/class/cdc/cdc.h | 20 +++++++++++--------- src/class/cdc/cdc_host.h | 2 +- 4 files changed, 14 insertions(+), 12 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index c8e9138e3..a53000a11 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -118,7 +118,7 @@ // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t // bit rate = 115200, 1 stop bit, no parity, 8 bit data width -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } #ifdef __cplusplus diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 1bed9a9b3..ba23301ed 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -123,7 +123,7 @@ // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t // bit rate = 115200, 1 stop bit, no parity, 8 bit data width -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } #ifdef __cplusplus diff --git a/src/class/cdc/cdc.h b/src/class/cdc/cdc.h index 4658e43af..deec32ae4 100644 --- a/src/class/cdc/cdc.h +++ b/src/class/cdc/cdc.h @@ -182,21 +182,23 @@ typedef enum CDC_REQUEST_MDLM_SEMANTIC_MODEL = 0x60, }cdc_management_request_t; -enum -{ +enum { CDC_CONTROL_LINE_STATE_DTR = 0x01, CDC_CONTROL_LINE_STATE_RTS = 0x02, }; -enum -{ - CDC_LINE_CONDING_STOP_BITS_1 = 0, // 1 bit - CDC_LINE_CONDING_STOP_BITS_1_5 = 1, // 1.5 bits - CDC_LINE_CONDING_STOP_BITS_2 = 2, // 2 bits +enum { + CDC_LINE_CODING_STOP_BITS_1 = 0, // 1 bit + CDC_LINE_CODING_STOP_BITS_1_5 = 1, // 1.5 bits + CDC_LINE_CODING_STOP_BITS_2 = 2, // 2 bits }; -enum -{ +// TODO Backward compatible for typos. Maybe removed in the future release +#define CDC_LINE_CONDING_STOP_BITS_1 CDC_LINE_CODING_STOP_BITS_1 +#define CDC_LINE_CONDING_STOP_BITS_1_5 CDC_LINE_CODING_STOP_BITS_1_5 +#define CDC_LINE_CONDING_STOP_BITS_2 CDC_LINE_CODING_STOP_BITS_2 + +enum { CDC_LINE_CODING_PARITY_NONE = 0, CDC_LINE_CODING_PARITY_ODD = 1, CDC_LINE_CODING_PARITY_EVEN = 2, diff --git a/src/class/cdc/cdc_host.h b/src/class/cdc/cdc_host.h index 19552f1ee..9e5edd94e 100644 --- a/src/class/cdc/cdc_host.h +++ b/src/class/cdc/cdc_host.h @@ -44,7 +44,7 @@ // Set Line Coding on enumeration/mounted, value for cdc_line_coding_t //#ifndef CFG_TUH_CDC_LINE_CODING_ON_ENUM -//#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } +//#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } //#endif // RX FIFO size -- cgit v1.3.1 From 26ca48e7a7a93f8b7f13a209745080855a7bc4fe Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 20:19:14 +0700 Subject: move make.mk and rules.mk to build_system/make --- .idea/cmake.xml | 2 +- examples/build_system/make/make.mk | 144 ++++++++++++++++++++ examples/build_system/make/rules.mk | 173 ++++++++++++++++++++++++ examples/device/audio_4_channel_mic/Makefile | 4 +- examples/device/audio_test/Makefile | 4 +- examples/device/audio_test_multi_rate/Makefile | 4 +- examples/device/board_test/Makefile | 4 +- examples/device/cdc_dual_ports/Makefile | 4 +- examples/device/cdc_msc/Makefile | 4 +- examples/device/cdc_msc_freertos/Makefile | 4 +- examples/device/cdc_uac2/Makefile | 4 +- examples/device/dfu/Makefile | 4 +- examples/device/dfu_runtime/Makefile | 4 +- examples/device/dynamic_configuration/Makefile | 4 +- examples/device/hid_boot_interface/Makefile | 4 +- examples/device/hid_composite/Makefile | 4 +- examples/device/hid_composite_freertos/Makefile | 4 +- examples/device/hid_generic_inout/Makefile | 4 +- examples/device/hid_multiple_interface/Makefile | 4 +- examples/device/midi_test/Makefile | 4 +- examples/device/msc_dual_lun/Makefile | 4 +- examples/device/net_lwip_webserver/Makefile | 4 +- examples/device/uac2_headset/Makefile | 4 +- examples/device/usbtmc/Makefile | 4 +- examples/device/video_capture/Makefile | 4 +- examples/device/webusb_serial/Makefile | 4 +- examples/dual/host_hid_to_device_cdc/Makefile | 4 +- examples/host/bare_api/Makefile | 4 +- examples/host/cdc_msc_hid/Makefile | 4 +- examples/host/cdc_msc_hid_freertos/Makefile | 4 +- examples/host/hid_controller/Makefile | 4 +- examples/host/msc_file_explorer/Makefile | 4 +- examples/make.mk | 144 -------------------- examples/rules.mk | 173 ------------------------ examples/typec/power_delivery/Makefile | 4 +- tools/build_make.py | 4 +- 36 files changed, 380 insertions(+), 380 deletions(-) create mode 100644 examples/build_system/make/make.mk create mode 100644 examples/build_system/make/rules.mk delete mode 100644 examples/make.mk delete mode 100644 examples/rules.mk (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 97e503033..101f08078 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -63,7 +63,7 @@ - + diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk new file mode 100644 index 000000000..e1113aa52 --- /dev/null +++ b/examples/build_system/make/make.mk @@ -0,0 +1,144 @@ +# --------------------------------------- +# Common make definition for all examples +# --------------------------------------- + +#-------------- TOP and CURRENT_PATH ------------ + +# Set TOP to be the path to get from the current directory (where make was invoked) to the top of the tree. +# $(lastword $(MAKEFILE_LIST)) returns the name of this makefile relative to where make was invoked. +THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) + +# strip off /examples/build_system/make to get for example ../../.. +# and Set TOP to an absolute path +TOP = $(abspath $(subst make.mk,../../..,$(THIS_MAKEFILE))) + +# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos +CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) + +# Detect whether shell style is windows or not +# https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 +ifeq '$(findstring ;,$(PATH))' ';' +# PATH contains semicolon - so we're definitely on Windows. +CMDEXE := 1 + +# makefile shell commands should use syntax for DOS CMD, not unix sh +# Force DOS command shell on Windows. +SHELL := cmd.exe +endif + +# Handy check parameter function +check_defined = \ + $(strip $(foreach 1,$1, \ + $(call __check_defined,$1,$(strip $(value 2))))) +__check_defined = \ + $(if $(value $1),, \ + $(error Undefined make flag: $1$(if $2, ($2)))) + +# Build directory +BUILD := _build/$(BOARD) + +PROJECT := $(notdir $(CURDIR)) +BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) + +#-------------- Select the board to build for. ------------ + +# Board without family +ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) +BOARD_PATH := hw/bsp/$(BOARD) +FAMILY := +endif + +# Board within family +ifeq ($(BOARD_PATH),) + BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD))) + FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH))) + FAMILY_PATH = hw/bsp/$(FAMILY) +endif + +ifeq ($(BOARD_PATH),) + $(info You must provide a BOARD parameter with 'BOARD=') + $(error Invalid BOARD specified) +endif + +ifeq ($(FAMILY),) + include $(TOP)/hw/bsp/$(BOARD)/board.mk +else + # Include Family and Board specific defs + include $(TOP)/$(FAMILY_PATH)/family.mk + SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) +endif + +#-------------- Toolchain ------------ + +# Supported toolchain: gcc, iar +TOOLCHAIN ?= gcc + +# Can be set by board, default to ARM GCC +CROSS_COMPILE ?= arm-none-eabi- + +ifeq ($(TOOLCHAIN),iar) +CC := iccarm +USE_IAR = 1 +endif + +ifeq ($(CMDEXE),1) + CP = copy + RM = del + MKDIR = mkdir + PYTHON = python +else + CP = cp + RM = rm + MKDIR = mkdir + PYTHON = python3 +endif + +#-------------- Source files and compiler flags -------------- +# tinyusb makefile +include $(TOP)/src/tinyusb.mk +SRC_C += $(TINYUSB_SRC_C) + +# Include all source C in family & board folder +SRC_C += hw/bsp/board.c +SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) + +INC += \ + $(TOP)/$(FAMILY_PATH) \ + $(TOP)/src \ + +BOARD_UPPER = $(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$(subst -,_,$(BOARD)))))))))))))))))))))))))))) +CFLAGS += -DBOARD_$(BOARD_UPPER) + +# use max3421 as host controller +ifeq (${MAX3421_HOST},1) + SRC_C += src/portable/analog/max3421/hcd_max3421.c + CFLAGS += -DCFG_TUH_MAX3421=1 +endif + +# Log level is mapped to TUSB DEBUG option +ifneq ($(LOG),) + CMAKE_DEFSYM += -DLOG=$(LOG) + CFLAGS += -DCFG_TUSB_DEBUG=$(LOG) +endif + +# Logger: default is uart, can be set to rtt or swo +ifneq ($(LOGGER),) + CMAKE_DEFSYM += -DLOGGER=$(LOGGER) +endif + +ifeq ($(LOGGER),rtt) + CFLAGS += -DLOGGER_RTT -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + RTT_SRC = lib/SEGGER_RTT + INC += $(TOP)/$(RTT_SRC)/RTT + SRC_C += $(RTT_SRC)/RTT/SEGGER_RTT.c +else ifeq ($(LOGGER),swo) + CFLAGS += -DLOGGER_SWO +endif + +# CPU specific flags +ifdef CPU_CORE + include ${TOP}/examples/build_system/make/cpu/$(CPU_CORE).mk +endif + +# toolchain specific +include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk diff --git a/examples/build_system/make/rules.mk b/examples/build_system/make/rules.mk new file mode 100644 index 000000000..b02665cdd --- /dev/null +++ b/examples/build_system/make/rules.mk @@ -0,0 +1,173 @@ +# --------------------------------------- +# Common make rules for all examples +# --------------------------------------- + +# Set all as default goal +.DEFAULT_GOAL := all + +# ---------------- GNU Make Start ----------------------- +# ESP32-Sx and RP2040 has its own CMake build system +ifeq (,$(findstring $(FAMILY),espressif rp2040)) + +# --------------------------------------- +# Compiler Flags +# --------------------------------------- + +CFLAGS += $(addprefix -I,$(INC)) + +# Verbose mode +ifeq ("$(V)","1") +$(info CFLAGS $(CFLAGS) ) $(info ) +$(info LDFLAGS $(LDFLAGS)) $(info ) +$(info ASFLAGS $(ASFLAGS)) $(info ) +endif + +# --------------------------------------- +# Rules +# --------------------------------------- + +all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size + +uf2: $(BUILD)/$(PROJECT).uf2 + +# We set vpath to point to the top of the tree so that the source files +# can be located. By following this scheme, it allows a single build rule +# to be used to compile all .c files. +vpath %.c . $(TOP) +vpath %.s . $(TOP) +vpath %.S . $(TOP) + +include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN)_rules.mk + + +OBJ_DIRS = $(sort $(dir $(OBJ))) +$(OBJ): | $(OBJ_DIRS) +$(OBJ_DIRS): +ifeq ($(CMDEXE),1) + -@$(MKDIR) $(subst /,\,$@) +else + @$(MKDIR) -p $@ +endif + +# UF2 generation, iMXRT need to strip to text only before conversion +ifneq ($(FAMILY),imxrt) +$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex + @echo CREATE $@ + $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $^ +endif + +copy-artifact: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex $(BUILD)/$(PROJECT).uf2 + +endif +# ---------------- GNU Make End ----------------------- + +.PHONY: clean +clean: +ifeq ($(CMDEXE),1) + rd /S /Q $(subst /,\,$(BUILD)) +else + $(RM) -rf $(BUILD) +endif + +# get depenecies +.PHONY: get-deps +get-deps: + $(PYTHON) $(TOP)/tools/get_deps.py ${FAMILY} + +.PHONY: size +size: $(BUILD)/$(PROJECT).elf + -@echo '' + @$(SIZE) $< + -@echo '' + +# linkermap must be install previously at https://github.com/hathach/linkermap +linkermap: $(BUILD)/$(PROJECT).elf + @linkermap -v $<.map + +# --------------------------------------- +# Flash Targets +# --------------------------------------- + +# --------------- Jlink ----------------- +ifeq ($(OS),Windows_NT) + JLINKEXE = JLink.exe +else + JLINKEXE = JLinkExe +endif + +# Jlink Interface +JLINK_IF ?= swd + +# Jlink script +$(BUILD)/$(BOARD).jlink: $(BUILD)/$(PROJECT).hex + @echo halt > $@ + @echo loadfile $^ >> $@ + @echo r >> $@ + @echo go >> $@ + @echo exit >> $@ + +# Flash using jlink +flash-jlink: $(BUILD)/$(BOARD).jlink + $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $< + +# --------------- stm32 cube programmer ----------------- +# Flash STM32 MCU using stlink with STM32 Cube Programmer CLI +flash-stlink: $(BUILD)/$(PROJECT).elf + STM32_Programmer_CLI --connect port=swd --write $< --go + +# --------------- xfel ----------------- +$(BUILD)/$(PROJECT)-sunxi.bin: $(BUILD)/$(PROJECT).bin + $(PYTHON) $(TOP)/tools/mksunxi.py $< $@ + +flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin + xfel spinor write 0 $< + xfel reset + +# --------------- pyocd ----------------- +PYOCD_OPTION ?= +flash-pyocd: $(BUILD)/$(PROJECT).hex + pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $< + #pyocd reset -t $(PYOCD_TARGET) + +# --------------- openocd ----------------- +OPENOCD_OPTION ?= +flash-openocd: $(BUILD)/$(PROJECT).elf + openocd $(OPENOCD_OPTION) -c "program $< verify reset exit" + +# --------------- dfu-util ----------------- +DFU_UTIL_OPTION ?= -a 0 +flash-dfu-util: $(BUILD)/$(PROJECT).bin + dfu-util -R $(DFU_UTIL_OPTION) -D $< + +# --------------- Black Magic ----------------- +# This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules +BMP ?= /dev/ttyBmpGdb + +flash-bmp: $(BUILD)/$(PROJECT).elf + $(GDB) --batch -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' -ex load $< + +debug-bmp: $(BUILD)/$(PROJECT).elf + $(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $< + +#-------------- Artifacts -------------- + +# Create binary directory +$(BIN): +ifeq ($(CMDEXE),1) + @$(MKDIR) $(subst /,\,$@) +else + @$(MKDIR) -p $@ +endif + +# Copy binaries .elf, .bin, .hex, .uf2 to BIN for upload +# due to large size of combined artifacts, only uf2 is uploaded for now +copy-artifact: $(BIN) + @$(CP) $(BUILD)/$(PROJECT).uf2 $(BIN) + #@$(CP) $(BUILD)/$(PROJECT).bin $(BIN) + #@$(CP) $(BUILD)/$(PROJECT).hex $(BIN) + #@$(CP) $(BUILD)/$(PROJECT).elf $(BIN) + +# Print out the value of a make variable. +# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile +print-%: + @echo $* = $($*) diff --git a/examples/device/audio_4_channel_mic/Makefile b/examples/device/audio_4_channel_mic/Makefile index 8ee6a01ec..2c825bbf7 100644 --- a/examples/device/audio_4_channel_mic/Makefile +++ b/examples/device/audio_4_channel_mic/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/audio_test/Makefile b/examples/device/audio_test/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/audio_test/Makefile +++ b/examples/device/audio_test/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/audio_test_multi_rate/Makefile b/examples/device/audio_test_multi_rate/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/audio_test_multi_rate/Makefile +++ b/examples/device/audio_test_multi_rate/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/board_test/Makefile b/examples/device/board_test/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/board_test/Makefile +++ b/examples/device/board_test/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_dual_ports/Makefile b/examples/device/cdc_dual_ports/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/cdc_dual_ports/Makefile +++ b/examples/device/cdc_dual_ports/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_msc/Makefile b/examples/device/cdc_msc/Makefile index 429959e70..0c2e37180 100644 --- a/examples/device/cdc_msc/Makefile +++ b/examples/device/cdc_msc/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -12,4 +12,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 84c833fb5..13f336f99 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) @@ -43,4 +43,4 @@ CFLAGS_GCC += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/cdc_uac2/Makefile b/examples/device/cdc_uac2/Makefile index b7a8302ce..21dcdb0b2 100644 --- a/examples/device/cdc_uac2/Makefile +++ b/examples/device/cdc_uac2/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -13,4 +13,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/dfu/Makefile b/examples/device/dfu/Makefile index b3f2cc588..52a24cdb0 100644 --- a/examples/device/dfu/Makefile +++ b/examples/device/dfu/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/dfu_runtime/Makefile b/examples/device/dfu_runtime/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/dfu_runtime/Makefile +++ b/examples/device/dfu_runtime/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/dynamic_configuration/Makefile b/examples/device/dynamic_configuration/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/dynamic_configuration/Makefile +++ b/examples/device/dynamic_configuration/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_boot_interface/Makefile b/examples/device/hid_boot_interface/Makefile index b3f2cc588..52a24cdb0 100644 --- a/examples/device/hid_boot_interface/Makefile +++ b/examples/device/hid_boot_interface/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_composite/Makefile b/examples/device/hid_composite/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/hid_composite/Makefile +++ b/examples/device/hid_composite/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index a892e7d1d..add9e9814 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -1,6 +1,6 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel -include ../../make.mk +include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) @@ -44,4 +44,4 @@ CFLAGS_GCC += -Wno-error=cast-qual # FreeRTOS (lto + Os) linker issue LDFLAGS_GCC += -Wl,--undefined=vTaskSwitchContext -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_generic_inout/Makefile b/examples/device/hid_generic_inout/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/hid_generic_inout/Makefile +++ b/examples/device/hid_generic_inout/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/hid_multiple_interface/Makefile b/examples/device/hid_multiple_interface/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/hid_multiple_interface/Makefile +++ b/examples/device/hid_multiple_interface/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/midi_test/Makefile b/examples/device/midi_test/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/midi_test/Makefile +++ b/examples/device/midi_test/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/msc_dual_lun/Makefile b/examples/device/msc_dual_lun/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/msc_dual_lun/Makefile +++ b/examples/device/msc_dual_lun/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 90b429d00..22426ba0d 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -1,6 +1,6 @@ DEPS_SUBMODULES += lib/lwip -include ../../make.mk +include ../../build_system/make/make.mk # suppress warning caused by lwip CFLAGS_GCC += \ @@ -67,4 +67,4 @@ SRC_C += \ lib/networking/dnserver.c \ lib/networking/rndis_reports.c -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/uac2_headset/Makefile b/examples/device/uac2_headset/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/uac2_headset/Makefile +++ b/examples/device/uac2_headset/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/usbtmc/Makefile b/examples/device/usbtmc/Makefile index da088ea6b..1b4d398cf 100644 --- a/examples/device/usbtmc/Makefile +++ b/examples/device/usbtmc/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/video_capture/Makefile b/examples/device/video_capture/Makefile index 90d174c32..d698a848d 100644 --- a/examples/device/video_capture/Makefile +++ b/examples/device/video_capture/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk ifeq ($(DISABLE_MJPEG),1) CFLAGS += -DCFG_EXAMPLE_VIDEO_DISABLE_MJPEG @@ -15,4 +15,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/device/webusb_serial/Makefile b/examples/device/webusb_serial/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/device/webusb_serial/Makefile +++ b/examples/device/webusb_serial/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/dual/host_hid_to_device_cdc/Makefile b/examples/dual/host_hid_to_device_cdc/Makefile index 95c88e7e8..2c2168f5d 100644 --- a/examples/dual/host_hid_to_device_cdc/Makefile +++ b/examples/dual/host_hid_to_device_cdc/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -15,4 +15,4 @@ SRC_C += \ src/host/hub.c \ src/host/usbh.c -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/bare_api/Makefile b/examples/host/bare_api/Makefile index 161f8c774..0235e08c3 100644 --- a/examples/host/bare_api/Makefile +++ b/examples/host/bare_api/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -10,4 +10,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/cdc_msc_hid/Makefile b/examples/host/cdc_msc_hid/Makefile index 15b8a5b31..213c02f9c 100644 --- a/examples/host/cdc_msc_hid/Makefile +++ b/examples/host/cdc_msc_hid/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -13,4 +13,4 @@ EXAMPLE_SOURCE = \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index a9670b4f2..5351a6248 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) @@ -31,4 +31,4 @@ SRC_C += \ SRC_S += \ $(subst $(TOP)/,,$(wildcard $(TOP)/$(FREERTOS_PORTABLE_SRC)/*.s)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/hid_controller/Makefile b/examples/host/hid_controller/Makefile index e7f603f25..1377f1f90 100644 --- a/examples/host/hid_controller/Makefile +++ b/examples/host/hid_controller/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -11,4 +11,4 @@ EXAMPLE_SOURCE += \ SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index 8319d3c2b..c7d6a7cae 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk FATFS_PATH = lib/fatfs/source @@ -24,4 +24,4 @@ SRC_C += \ # suppress warning caused by fatfs CFLAGS += -Wno-error=cast-qual -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/examples/make.mk b/examples/make.mk deleted file mode 100644 index b646b46ce..000000000 --- a/examples/make.mk +++ /dev/null @@ -1,144 +0,0 @@ -# --------------------------------------- -# Common make definition for all examples -# --------------------------------------- - -#-------------- TOP and CURRENT_PATH ------------ - -# Set TOP to be the path to get from the current directory (where make was invoked) to the top of the tree. -# $(lastword $(MAKEFILE_LIST)) returns the name of this makefile relative to where make was invoked. -THIS_MAKEFILE := $(lastword $(MAKEFILE_LIST)) - -# strip off /tools/top.mk to get for example ../../.. -# and Set TOP to an absolute path -TOP = $(abspath $(subst make.mk,..,$(THIS_MAKEFILE))) - -# Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos -CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) - -# Detect whether shell style is windows or not -# https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 -ifeq '$(findstring ;,$(PATH))' ';' -# PATH contains semicolon - so we're definitely on Windows. -CMDEXE := 1 - -# makefile shell commands should use syntax for DOS CMD, not unix sh -# Force DOS command shell on Windows. -SHELL := cmd.exe -endif - -# Handy check parameter function -check_defined = \ - $(strip $(foreach 1,$1, \ - $(call __check_defined,$1,$(strip $(value 2))))) -__check_defined = \ - $(if $(value $1),, \ - $(error Undefined make flag: $1$(if $2, ($2)))) - -# Build directory -BUILD := _build/$(BOARD) - -PROJECT := $(notdir $(CURDIR)) -BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) - -#-------------- Select the board to build for. ------------ - -# Board without family -ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) -BOARD_PATH := hw/bsp/$(BOARD) -FAMILY := -endif - -# Board within family -ifeq ($(BOARD_PATH),) - BOARD_PATH := $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/*/boards/$(BOARD))) - FAMILY := $(word 3, $(subst /, ,$(BOARD_PATH))) - FAMILY_PATH = hw/bsp/$(FAMILY) -endif - -ifeq ($(BOARD_PATH),) - $(info You must provide a BOARD parameter with 'BOARD=') - $(error Invalid BOARD specified) -endif - -ifeq ($(FAMILY),) - include $(TOP)/hw/bsp/$(BOARD)/board.mk -else - # Include Family and Board specific defs - include $(TOP)/$(FAMILY_PATH)/family.mk - SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) -endif - -#-------------- Toolchain ------------ - -# Supported toolchain: gcc, iar -TOOLCHAIN ?= gcc - -# Can be set by board, default to ARM GCC -CROSS_COMPILE ?= arm-none-eabi- - -ifeq ($(TOOLCHAIN),iar) -CC := iccarm -USE_IAR = 1 -endif - -ifeq ($(CMDEXE),1) - CP = copy - RM = del - MKDIR = mkdir - PYTHON = python -else - CP = cp - RM = rm - MKDIR = mkdir - PYTHON = python3 -endif - -#-------------- Source files and compiler flags -------------- -# tinyusb makefile -include $(TOP)/src/tinyusb.mk -SRC_C += $(TINYUSB_SRC_C) - -# Include all source C in family & board folder -SRC_C += hw/bsp/board.c -SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) - -INC += \ - $(TOP)/$(FAMILY_PATH) \ - $(TOP)/src \ - -BOARD_UPPER = $(subst a,A,$(subst b,B,$(subst c,C,$(subst d,D,$(subst e,E,$(subst f,F,$(subst g,G,$(subst h,H,$(subst i,I,$(subst j,J,$(subst k,K,$(subst l,L,$(subst m,M,$(subst n,N,$(subst o,O,$(subst p,P,$(subst q,Q,$(subst r,R,$(subst s,S,$(subst t,T,$(subst u,U,$(subst v,V,$(subst w,W,$(subst x,X,$(subst y,Y,$(subst z,Z,$(subst -,_,$(BOARD)))))))))))))))))))))))))))) -CFLAGS += -DBOARD_$(BOARD_UPPER) - -# use max3421 as host controller -ifeq (${MAX3421_HOST},1) - SRC_C += src/portable/analog/max3421/hcd_max3421.c - CFLAGS += -DCFG_TUH_MAX3421=1 -endif - -# Log level is mapped to TUSB DEBUG option -ifneq ($(LOG),) - CMAKE_DEFSYM += -DLOG=$(LOG) - CFLAGS += -DCFG_TUSB_DEBUG=$(LOG) -endif - -# Logger: default is uart, can be set to rtt or swo -ifneq ($(LOGGER),) - CMAKE_DEFSYM += -DLOGGER=$(LOGGER) -endif - -ifeq ($(LOGGER),rtt) - CFLAGS += -DLOGGER_RTT -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL - RTT_SRC = lib/SEGGER_RTT - INC += $(TOP)/$(RTT_SRC)/RTT - SRC_C += $(RTT_SRC)/RTT/SEGGER_RTT.c -else ifeq ($(LOGGER),swo) - CFLAGS += -DLOGGER_SWO -endif - -# CPU specific flags -ifdef CPU_CORE - include ${TOP}/examples/build_system/make/cpu/$(CPU_CORE).mk -endif - -# toolchain specific -include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk diff --git a/examples/rules.mk b/examples/rules.mk deleted file mode 100644 index b02665cdd..000000000 --- a/examples/rules.mk +++ /dev/null @@ -1,173 +0,0 @@ -# --------------------------------------- -# Common make rules for all examples -# --------------------------------------- - -# Set all as default goal -.DEFAULT_GOAL := all - -# ---------------- GNU Make Start ----------------------- -# ESP32-Sx and RP2040 has its own CMake build system -ifeq (,$(findstring $(FAMILY),espressif rp2040)) - -# --------------------------------------- -# Compiler Flags -# --------------------------------------- - -CFLAGS += $(addprefix -I,$(INC)) - -# Verbose mode -ifeq ("$(V)","1") -$(info CFLAGS $(CFLAGS) ) $(info ) -$(info LDFLAGS $(LDFLAGS)) $(info ) -$(info ASFLAGS $(ASFLAGS)) $(info ) -endif - -# --------------------------------------- -# Rules -# --------------------------------------- - -all: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex size - -uf2: $(BUILD)/$(PROJECT).uf2 - -# We set vpath to point to the top of the tree so that the source files -# can be located. By following this scheme, it allows a single build rule -# to be used to compile all .c files. -vpath %.c . $(TOP) -vpath %.s . $(TOP) -vpath %.S . $(TOP) - -include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN)_rules.mk - - -OBJ_DIRS = $(sort $(dir $(OBJ))) -$(OBJ): | $(OBJ_DIRS) -$(OBJ_DIRS): -ifeq ($(CMDEXE),1) - -@$(MKDIR) $(subst /,\,$@) -else - @$(MKDIR) -p $@ -endif - -# UF2 generation, iMXRT need to strip to text only before conversion -ifneq ($(FAMILY),imxrt) -$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).hex - @echo CREATE $@ - $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -c -o $@ $^ -endif - -copy-artifact: $(BUILD)/$(PROJECT).bin $(BUILD)/$(PROJECT).hex $(BUILD)/$(PROJECT).uf2 - -endif -# ---------------- GNU Make End ----------------------- - -.PHONY: clean -clean: -ifeq ($(CMDEXE),1) - rd /S /Q $(subst /,\,$(BUILD)) -else - $(RM) -rf $(BUILD) -endif - -# get depenecies -.PHONY: get-deps -get-deps: - $(PYTHON) $(TOP)/tools/get_deps.py ${FAMILY} - -.PHONY: size -size: $(BUILD)/$(PROJECT).elf - -@echo '' - @$(SIZE) $< - -@echo '' - -# linkermap must be install previously at https://github.com/hathach/linkermap -linkermap: $(BUILD)/$(PROJECT).elf - @linkermap -v $<.map - -# --------------------------------------- -# Flash Targets -# --------------------------------------- - -# --------------- Jlink ----------------- -ifeq ($(OS),Windows_NT) - JLINKEXE = JLink.exe -else - JLINKEXE = JLinkExe -endif - -# Jlink Interface -JLINK_IF ?= swd - -# Jlink script -$(BUILD)/$(BOARD).jlink: $(BUILD)/$(PROJECT).hex - @echo halt > $@ - @echo loadfile $^ >> $@ - @echo r >> $@ - @echo go >> $@ - @echo exit >> $@ - -# Flash using jlink -flash-jlink: $(BUILD)/$(BOARD).jlink - $(JLINKEXE) -device $(JLINK_DEVICE) -if $(JLINK_IF) -JTAGConf -1,-1 -speed auto -CommandFile $< - -# --------------- stm32 cube programmer ----------------- -# Flash STM32 MCU using stlink with STM32 Cube Programmer CLI -flash-stlink: $(BUILD)/$(PROJECT).elf - STM32_Programmer_CLI --connect port=swd --write $< --go - -# --------------- xfel ----------------- -$(BUILD)/$(PROJECT)-sunxi.bin: $(BUILD)/$(PROJECT).bin - $(PYTHON) $(TOP)/tools/mksunxi.py $< $@ - -flash-xfel: $(BUILD)/$(PROJECT)-sunxi.bin - xfel spinor write 0 $< - xfel reset - -# --------------- pyocd ----------------- -PYOCD_OPTION ?= -flash-pyocd: $(BUILD)/$(PROJECT).hex - pyocd flash -t $(PYOCD_TARGET) $(PYOCD_OPTION) $< - #pyocd reset -t $(PYOCD_TARGET) - -# --------------- openocd ----------------- -OPENOCD_OPTION ?= -flash-openocd: $(BUILD)/$(PROJECT).elf - openocd $(OPENOCD_OPTION) -c "program $< verify reset exit" - -# --------------- dfu-util ----------------- -DFU_UTIL_OPTION ?= -a 0 -flash-dfu-util: $(BUILD)/$(PROJECT).bin - dfu-util -R $(DFU_UTIL_OPTION) -D $< - -# --------------- Black Magic ----------------- -# This symlink is created by https://github.com/blacksphere/blackmagic/blob/master/driver/99-blackmagic.rules -BMP ?= /dev/ttyBmpGdb - -flash-bmp: $(BUILD)/$(PROJECT).elf - $(GDB) --batch -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' -ex load $< - -debug-bmp: $(BUILD)/$(PROJECT).elf - $(GDB) -ex 'target extended-remote $(BMP)' -ex 'monitor swdp_scan' -ex 'attach 1' $< - -#-------------- Artifacts -------------- - -# Create binary directory -$(BIN): -ifeq ($(CMDEXE),1) - @$(MKDIR) $(subst /,\,$@) -else - @$(MKDIR) -p $@ -endif - -# Copy binaries .elf, .bin, .hex, .uf2 to BIN for upload -# due to large size of combined artifacts, only uf2 is uploaded for now -copy-artifact: $(BIN) - @$(CP) $(BUILD)/$(PROJECT).uf2 $(BIN) - #@$(CP) $(BUILD)/$(PROJECT).bin $(BIN) - #@$(CP) $(BUILD)/$(PROJECT).hex $(BIN) - #@$(CP) $(BUILD)/$(PROJECT).elf $(BIN) - -# Print out the value of a make variable. -# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile -print-%: - @echo $* = $($*) diff --git a/examples/typec/power_delivery/Makefile b/examples/typec/power_delivery/Makefile index 2a3d854fb..7fa475da5 100644 --- a/examples/typec/power_delivery/Makefile +++ b/examples/typec/power_delivery/Makefile @@ -1,4 +1,4 @@ -include ../../make.mk +include ../../build_system/make/make.mk INC += \ src \ @@ -8,4 +8,4 @@ INC += \ EXAMPLE_SOURCE += $(wildcard src/*.c) SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) -include ../../rules.mk +include ../../build_system/make/rules.mk diff --git a/tools/build_make.py b/tools/build_make.py index cd9884313..f79a452e4 100644 --- a/tools/build_make.py +++ b/tools/build_make.py @@ -43,9 +43,9 @@ if __name__ == '__main__': # If examples are not specified in arguments, build all all_examples = [] for d in os.scandir("examples"): - if d.is_dir() and 'cmake' not in d.name: + if d.is_dir() and 'cmake' not in d.name and 'build_system' not in d.name: for entry in os.scandir(d.path): - if entry.is_dir() and 'cmake' not in entry.name and entry.name != 'build_system': + if entry.is_dir() and 'cmake' not in entry.name: all_examples.append(d.name + '/' + entry.name) filter_with_input(all_examples) all_examples.sort() -- cgit v1.3.1 From 1a3f5f7a09d523872d8ab42fc3b432c19e8845b7 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 18 Dec 2023 20:33:43 +0700 Subject: update FreeRTOSConfig.h - remove configAssert() - configCHECK_HANDLER_INSTALLATION=0 (to prevent unused-parameter error with configAssert(x)=nil --- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h | 1 + hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- 25 files changed, 25 insertions(+), 408 deletions(-) (limited to 'examples/host') diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 69d638288..6cc7a6577 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -96,6 +96,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -130,23 +131,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - #ifdef __RX__ /* Renesas RX series */ #define vSoftwareInterruptISR INT_Excep_ICU_SWINT diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 69d638288..6cc7a6577 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -96,6 +96,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -130,23 +131,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - #ifdef __RX__ /* Renesas RX series */ #define vSoftwareInterruptISR INT_Excep_ICU_SWINT diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index a1fc8bb09..bd754518d 100644 --- a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -105,6 +105,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -139,23 +140,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - #ifdef __RX__ /* Renesas RX series */ #define vSoftwareInterruptISR INT_Excep_ICU_SWINT diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index 0248f0b47..7152fda01 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h index e7bd4705a..f2b3d649d 100644 --- a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h index b8b8268f7..17ddc1da4 100644 --- a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h index eb0da971f..8cd3ee3d8 100644 --- a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h index b8b8268f7..17ddc1da4 100644 --- a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h index e70debfc0..6f10a7ab0 100644 --- a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h index e70debfc0..6f10a7ab0 100644 --- a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index e70debfc0..6f10a7ab0 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h index 00f832b84..0ddd536fb 100644 --- a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h index cf643d6e5..57ed3a9e4 100644 --- a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -96,6 +96,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -131,23 +132,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h index d83c79601..4aa0f8cca 100644 --- a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h index 923627b70..a283560fe 100644 --- a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h index fa7092537..b9a54b9b3 100644 --- a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h index 2bc6b926b..d001411d9 100644 --- a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h index dfe5fb6cf..e9828cbb2 100644 --- a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h index 3ad0e794e..31fb7942f 100644 --- a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h index e15740e65..e1a7bb135 100644 --- a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h index d38801732..fa3f0ac33 100644 --- a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h index 34398c448..cf6e23c1b 100644 --- a/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h index bf7a80043..8bbeefcc7 100644 --- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h index 9b2af0a22..23ba069aa 100644 --- a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h index 1223274dc..b51020590 100644 --- a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler -- cgit v1.3.1 From 551e47a464f55e1e36e2812e79902f4ef2955a17 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 Dec 2023 22:50:01 +0700 Subject: allow rp2040 to use max3421e as host controller - fix warnings build hcd max3421 with rp2040 - add tinyusb_host_max3421 target for rp2040 cmake, -DMAX3421_HOST=1 will enable this - add max3421 driver implementation for rp2040 family - update tusb_config for host to allow easy enable host selection for rp2040 (default/pio-usb/max3421) --- .idea/cmake.xml | 15 +-- examples/host/bare_api/src/tusb_config.h | 64 +++++----- examples/host/cdc_msc_hid/src/tusb_config.h | 64 +++++----- .../host/cdc_msc_hid_freertos/src/tusb_config.h | 64 +++++----- examples/host/hid_controller/src/tusb_config.h | 64 +++++----- examples/host/msc_file_explorer/src/tusb_config.h | 65 +++++----- hw/bsp/rp2040/board.h | 11 ++ hw/bsp/rp2040/family.c | 140 +++++++++++++++------ hw/bsp/rp2040/family.cmake | 22 +++- src/portable/analog/max3421/hcd_max3421.c | 36 +++--- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 2 +- 11 files changed, 341 insertions(+), 206 deletions(-) (limited to 'examples/host') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index d12e44789..d3917c1f7 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,16 +2,17 @@ - - - + + + + - + @@ -25,7 +26,7 @@ - + @@ -39,10 +40,10 @@ - - + + diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index ede9618d3..05ffbdf75 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index a53000a11..61abb85eb 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 - // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 - #define CFG_TUH_RPI_PIO_USB 0 - #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index ba23301ed..c661f47be 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 - // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 - #define CFG_TUH_RPI_PIO_USB 0 - #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -72,12 +52,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -90,11 +64,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index d37fc02d2..8ddaddda7 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -30,28 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - - #if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -67,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -85,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index b4ccd8223..1703761a4 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -30,29 +30,8 @@ extern "C" { #endif -//--------------------------------------------------------------------+ -// Board Specific Configuration -//--------------------------------------------------------------------+ - -#if CFG_TUSB_MCU == OPT_MCU_RP2040 - // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 - #define CFG_TUH_RPI_PIO_USB 0 - #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB -#endif - - -// RHPort number used for host can be defined by board.mk, default to port 0 -#ifndef BOARD_TUH_RHPORT -#define BOARD_TUH_RHPORT 0 -#endif - -// RHPort max operational speed can defined by board.mk -#ifndef BOARD_TUH_MAX_SPEED -#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - //-------------------------------------------------------------------- -// COMMON CONFIGURATION +// Common Configuration //-------------------------------------------------------------------- // defined by compiler flags for flexibility @@ -68,12 +47,6 @@ #define CFG_TUSB_DEBUG 0 #endif -// Enable Host stack -#define CFG_TUH_ENABLED 1 - -// Default is max speed that hardware controller could support with on-chip PHY -#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. @@ -86,11 +59,43 @@ #endif #ifndef CFG_TUH_MEM_ALIGN -#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#define CFG_TUH_MEM_ALIGN __attribute__ ((aligned(4))) +#endif + +//-------------------------------------------------------------------- +// Host Configuration +//-------------------------------------------------------------------- + +// Enable Host stack +#define CFG_TUH_ENABLED 1 + +#if CFG_TUSB_MCU == OPT_MCU_RP2040 + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + + // host roothub port is 1 if using either pio-usb or max3421 + #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) + #define BOARD_TUH_RHPORT 1 + #endif +#endif + +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif //-------------------------------------------------------------------- -// CONFIGURATION +// Driver Configuration //-------------------------------------------------------------------- // Size of buffer to hold descriptors and other data used for enumeration diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index 063c9580e..3849894ce 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -74,6 +74,17 @@ #define PICO_DEFAULT_PIO_USB_VBUSEN_STATE 1 #endif +//-------------------------------------------------------------------- +// USB Host MAX3421E +//-------------------------------------------------------------------- + +#define MAX3421_SPI PICO_DEFAULT_SPI_INSTANCE +#define MAX3421_SCK_PIN PICO_DEFAULT_SPI_SCK_PIN +#define MAX3421_MOSI_PIN PICO_DEFAULT_SPI_TX_PIN +#define MAX3421_MISO_PIN PICO_DEFAULT_SPI_RX_PIN +#define MAX3421_CS_PIN 10 +#define MAX3421_INTR_PIN 9 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 5ac104688..cffb632f3 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -37,10 +37,19 @@ #include "bsp/board_api.h" #include "board.h" +#ifdef UART_DEV +static uart_inst_t *uart_inst; +#endif + #if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB #include "pio_usb.h" #endif +#if CFG_TUH_ENABLED && CFG_TUH_MAX3421 +#include "hardware/spi.h" +static void max3421_init(void); +#endif + #ifdef BUTTON_BOOTSEL // This example blinks the Picoboard LED when the BOOTSEL button is pressed. // @@ -53,73 +62,66 @@ // This doesn't work if others are trying to access flash at the same time, // e.g. XIP streamer, or the other core. bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { - const uint CS_PIN_INDEX = 1; + const uint CS_PIN_INDEX = 1; - // Must disable interrupts, as interrupt handlers may be in flash, and we - // are about to temporarily disable flash access! - uint32_t flags = save_and_disable_interrupts(); + // Must disable interrupts, as interrupt handlers may be in flash, and we + // are about to temporarily disable flash access! + uint32_t flags = save_and_disable_interrupts(); - // Set chip select to Hi-Z - hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, - GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, - IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); + // Set chip select to Hi-Z + hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, + GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, + IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); - // Note we can't call into any sleep functions in flash right now - for (volatile int i = 0; i < 1000; ++i); + // Note we can't call into any sleep functions in flash right now + for (volatile int i = 0; i < 1000; ++i); - // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. - // Note the button pulls the pin *low* when pressed. - bool button_state = (sio_hw->gpio_hi_in & (1u << CS_PIN_INDEX)); + // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. + // Note the button pulls the pin *low* when pressed. + bool button_state = (sio_hw->gpio_hi_in & (1u << CS_PIN_INDEX)); - // Need to restore the state of chip select, else we are going to have a - // bad time when we return to code in flash! - hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, - GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, - IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); + // Need to restore the state of chip select, else we are going to have a + // bad time when we return to code in flash! + hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl, + GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB, + IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); - restore_interrupts(flags); + restore_interrupts(flags); - return button_state; + return button_state; } #endif //------------- Segger RTT retarget -------------// #if defined(LOGGER_RTT) - // Logging with RTT // - If RTT Control Block is not found by 'Auto Detection` try to use 'Search Range` with '0x20000000 0x10000' // - SWD speed is rather slow around 1000Khz - #include "pico/stdio/driver.h" #include "SEGGER_RTT.h" -static void stdio_rtt_write (const char *buf, int length) -{ +static void stdio_rtt_write (const char *buf, int length) { SEGGER_RTT_Write(0, buf, (unsigned) length); } -static int stdio_rtt_read (char *buf, int len) -{ +static int stdio_rtt_read (char *buf, int len) { return (int) SEGGER_RTT_Read(0, buf, (unsigned) len); } -static stdio_driver_t stdio_rtt = -{ +static stdio_driver_t stdio_rtt = { .out_chars = stdio_rtt_write, .out_flush = NULL, .in_chars = stdio_rtt_read }; -void stdio_rtt_init(void) -{ +void stdio_rtt_init(void) { stdio_set_driver_enabled(&stdio_rtt, true); } - #endif -#ifdef UART_DEV -static uart_inst_t *uart_inst; -#endif +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ void board_init(void) { @@ -165,7 +167,9 @@ void board_init(void) #endif #if CFG_TUH_ENABLED - // set portfunc to host !!! + #if CFG_TUH_MAX3421 + max3421_init(); + #endif #endif #if !CFG_TUD_ENABLED && !CFG_TUH_ENABLED @@ -242,3 +246,69 @@ int board_getchar(void) { // rp2040 implementation will install appropriate handler when initializing // tinyusb. There is no need to forward IRQ from application //--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// API: SPI transfer with MAX3421E, must be implemented by application +//--------------------------------------------------------------------+ +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 + +void max3421_int_handler(uint gpio, uint32_t event_mask) { + if (!(gpio == MAX3421_INTR_PIN && event_mask & GPIO_IRQ_EDGE_FALL)) return; + tuh_int_handler(BOARD_TUH_RHPORT, true); +} + +static void max3421_init(void) { + // CS pin + gpio_init(MAX3421_CS_PIN); + gpio_set_dir(MAX3421_CS_PIN, GPIO_OUT); + gpio_put(MAX3421_CS_PIN, true); + + // Interrupt pin + gpio_init(MAX3421_INTR_PIN); + gpio_set_dir(MAX3421_INTR_PIN, GPIO_IN); + gpio_pull_up(MAX3421_INTR_PIN); + gpio_set_irq_enabled_with_callback(MAX3421_INTR_PIN, GPIO_IRQ_EDGE_FALL, true, max3421_int_handler); + + // SPI init + spi_init(MAX3421_SPI, 4*1000000ul); + gpio_set_function(MAX3421_SCK_PIN, GPIO_FUNC_SPI); + gpio_set_function(MAX3421_MOSI_PIN, GPIO_FUNC_SPI); + gpio_set_function(MAX3421_MISO_PIN, GPIO_FUNC_SPI); + spi_set_format(MAX3421_SPI, 8, SPI_CPOL_0, SPI_CPHA_0, SPI_MSB_FIRST); +} + +//// API to enable/disable MAX3421 INTR pin interrupt +void tuh_max3421_int_api(uint8_t rhport, bool enabled) { + (void) rhport; + irq_set_enabled(IO_IRQ_BANK0, enabled); +} + +// API to control MAX3421 SPI CS +void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) { + (void) rhport; + gpio_put(MAX3421_CS_PIN, !active); +} + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes) { + (void) rhport; + + if (tx_buf == NULL && rx_buf == NULL) { + return false; + } + + int ret; + + if (tx_buf == NULL) { + ret = spi_read_blocking(MAX3421_SPI, 0, rx_buf, xfer_bytes); + }else if (rx_buf == NULL) { + ret = spi_write_blocking(MAX3421_SPI, tx_buf, xfer_bytes); + }else { + ret = spi_write_read_blocking(spi0, tx_buf, rx_buf, xfer_bytes); + } + + return ret == (int) xfer_bytes; +} + +#endif diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 77d8029d9..ec40806fd 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -103,6 +103,20 @@ target_compile_definitions(tinyusb_host_base INTERFACE RP2040_USB_HOST_MODE=1 ) +#------------------------------------ +# Host MAX3421 +#------------------------------------ +add_library(tinyusb_host_max3421 INTERFACE) +target_sources(tinyusb_host_max3421 INTERFACE + ${TOP}/src/portable/analog/max3421/hcd_max3421.c + ) +target_compile_definitions(tinyusb_host_max3421 INTERFACE + CFG_TUH_MAX3421=1 + ) +target_link_libraries(tinyusb_host_max3421 INTERFACE + hardware_spi + ) + #------------------------------------ # BSP & Additions #------------------------------------ @@ -126,7 +140,7 @@ target_compile_definitions(tinyusb_additions INTERFACE if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt") target_compile_definitions(tinyusb_additions INTERFACE LOGGER_RTT - SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + #SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL ) target_sources(tinyusb_additions INTERFACE @@ -186,6 +200,7 @@ function(family_add_pico_pio_usb TARGET) target_link_libraries(${TARGET} PUBLIC tinyusb_pico_pio_usb) endfunction() + # since Pico-PIO_USB compiler support may lag, and change from version to version, add a function that pico-sdk/pico-examples # can check (if present) in case the user has updated their TinyUSB function(is_compiler_supported_by_pico_pio_usb OUTVAR) @@ -209,6 +224,11 @@ function(family_configure_host_example TARGET RTOS) family_add_pico_pio_usb(${PROJECT}) endif() endif() + + # for max3421 host + if (MAX3421_HOST STREQUAL "1") + target_link_libraries(${TARGET} PUBLIC tinyusb_host_max3421) + endif() endfunction() diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 051b7eaa8..cc4799dd6 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -171,6 +171,8 @@ enum { //--------------------------------------------------------------------+ typedef struct { + uint8_t daddr; + struct TU_ATTR_PACKED { uint8_t ep_dir : 1; uint8_t is_iso : 1; @@ -179,17 +181,19 @@ typedef struct { uint8_t xfer_pending : 1; uint8_t xfer_complete : 1; }; + struct TU_ATTR_PACKED { - uint8_t daddr : 4; uint8_t ep_num : 4; + uint16_t packet_size : 12; }; - uint16_t packet_size; uint16_t total_len; uint16_t xferred_len; uint8_t* buf; } max3421_ep_t; +TU_VERIFY_STATIC(sizeof(max3421_ep_t) == 12, "size is not correct"); + typedef struct { // cached register uint8_t sndbc; @@ -320,7 +324,7 @@ static void fifo_read(uint8_t rhport, uint8_t * buffer, uint16_t len, bool in_is static inline void hirq_write(uint8_t rhport, uint8_t data, bool in_isr) { reg_write(rhport, HIRQ_ADDR, data, in_isr); // HIRQ write 1 is clear - _hcd_data.hirq &= ~data; + _hcd_data.hirq &= (uint8_t) ~data; } static inline void hien_write(uint8_t rhport, uint8_t data, bool in_isr) { @@ -390,7 +394,7 @@ static void free_ep(uint8_t daddr) { } static max3421_ep_t * find_next_pending_ep(max3421_ep_t * cur_ep) { - size_t const idx = cur_ep - _hcd_data.ep; + size_t const idx = (size_t) (cur_ep - _hcd_data.ep); // starting from next endpoint for (size_t i = idx + 1; i < CFG_TUH_MAX3421_ENDPOINT_TOTAL; i++) { @@ -537,8 +541,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e (void) rhport; (void) daddr; - uint8_t ep_num = tu_edpt_number(ep_desc->bEndpointAddress); - uint8_t ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); + uint8_t const ep_num = tu_edpt_number(ep_desc->bEndpointAddress); + tusb_dir_t const ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); max3421_ep_t * ep; if (daddr == 0 && ep_num == 0) { @@ -547,15 +551,15 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e ep = allocate_ep(); TU_ASSERT(ep); ep->daddr = daddr; - ep->ep_num = ep_num; - ep->ep_dir = ep_dir; + ep->ep_num = (uint8_t) (ep_num & 0x0f); + ep->ep_dir = (ep_dir == TUSB_DIR_IN) ? 1 : 0; } if ( TUSB_XFER_ISOCHRONOUS == ep_desc->bmAttributes.xfer ) { ep->is_iso = 1; } - ep->packet_size = tu_edpt_packet_size(ep_desc); + ep->packet_size = (uint16_t) (tu_edpt_packet_size(ep_desc) & 0x7ff); return true; } @@ -577,7 +581,7 @@ void xact_out(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { } sndbc_write(rhport, xact_len, in_isr); - uint8_t hxfr = ep->ep_num | HXFR_OUT_NIN | (ep->is_iso ? HXFR_ISO : 0); + uint8_t const hxfr = (uint8_t ) (ep->ep_num | HXFR_OUT_NIN | (ep->is_iso ? HXFR_ISO : 0)); hxfr_write(rhport, hxfr, in_isr); } @@ -590,7 +594,7 @@ void xact_in(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { reg_write(rhport, HCTL_ADDR, hctl, in_isr); } - uint8_t hxfr = ep->ep_num | (ep->is_iso ? HXFR_ISO : 0); + uint8_t const hxfr = (uint8_t) (ep->ep_num | (ep->is_iso ? HXFR_ISO : 0)); hxfr_write(rhport, hxfr, in_isr); } @@ -623,13 +627,13 @@ TU_ATTR_ALWAYS_INLINE static inline void xact_inout(uint8_t rhport, max3421_ep_t // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { uint8_t const ep_num = tu_edpt_number(ep_addr); - uint8_t const ep_dir = tu_edpt_dir(ep_addr); + uint8_t const ep_dir = (uint8_t) tu_edpt_dir(ep_addr); max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir); TU_VERIFY(ep); // control transfer can switch direction - ep->ep_dir = ep_dir; + ep->ep_dir = ep_dir ? 1u : 0u; ep->buf = buffer; ep->total_len = buflen; @@ -748,9 +752,9 @@ static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t re // save data toggle if (ep->ep_dir) { - ep->data_toggle = (hrsl & HRSL_RCVTOGRD) ? 1 : 0; + ep->data_toggle = (hrsl & HRSL_RCVTOGRD) ? 1u : 0u; }else { - ep->data_toggle = (hrsl & HRSL_SNDTOGRD) ? 1 : 0; + ep->data_toggle = (hrsl & HRSL_SNDTOGRD) ? 1u : 0u; } ep->xfer_pending = 0; @@ -929,7 +933,7 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { } // clear all interrupt except SNDBAV_IRQ (never clear by us). Note RCVDAV_IRQ, HXFRDN_IRQ already clear while processing - hirq &= ~HIRQ_SNDBAV_IRQ; + hirq &= (uint8_t) ~HIRQ_SNDBAV_IRQ; if ( hirq ) { hirq_write(rhport, hirq, in_isr); } diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 4ed6d36bb..08aef9314 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -27,7 +27,7 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUH_RPI_PIO_USB +#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUH_RPI_PIO_USB && !CFG_TUH_MAX3421 #include "pico.h" #include "rp2040_usb.h" -- cgit v1.3.1 From c2bbcc9f60a2b7293fad4e24468d3f045fde28ee Mon Sep 17 00:00:00 2001 From: IngHK Date: Tue, 26 Dec 2023 20:14:03 +0100 Subject: initial support of CH34x CDC device --- examples/host/cdc_msc_hid/src/tusb_config.h | 1 + .../host/cdc_msc_hid_freertos/src/tusb_config.h | 1 + src/class/cdc/cdc_host.c | 466 ++++++++++++++++++++- src/class/cdc/serial/ch34x.h | 113 +++++ src/tusb_option.h | 17 + 5 files changed, 595 insertions(+), 3 deletions(-) create mode 100644 src/class/cdc/serial/ch34x.h (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 61abb85eb..76d59c316 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -105,6 +105,7 @@ #define CFG_TUH_CDC 1 // CDC ACM #define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CH34X 1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces #define CFG_TUH_MSC 1 #define CFG_TUH_VENDOR 0 diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index c661f47be..bb7c3388d 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -110,6 +110,7 @@ #define CFG_TUH_CDC 1 // CDC ACM #define CFG_TUH_CDC_FTDI 1 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CP210X 1 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CH34X 1 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_HID (3*CFG_TUH_DEVICE_MAX) // typical keyboard + mouse device can have 3-4 HID interfaces #define CFG_TUH_MSC 1 #define CFG_TUH_VENDOR 0 diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index a6dfb45ae..9b5186e0c 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -2,6 +2,7 @@ * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) + * Copyright (c) 2023 Heiko Kuester (CH34x support) * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -69,7 +70,16 @@ typedef struct { uint8_t rx_ff_buf[CFG_TUH_CDC_TX_BUFSIZE]; CFG_TUH_MEM_ALIGN uint8_t rx_ep_buf[CFG_TUH_CDC_TX_EPSIZE]; } stream; - + #if CFG_TUH_CDC_CH34X + struct { + uint32_t baud_rate; + uint8_t mcr; + uint8_t msr; + uint8_t lcr; + uint32_t quirks; + uint8_t version; + } ch34x; + #endif } cdch_interface_t; CFG_TUH_MEM_SECTION @@ -121,6 +131,23 @@ static bool cp210x_set_modem_ctrl(cdch_interface_t* p_cdc, uint16_t line_state, static bool cp210x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data); #endif +//------------- CH34x prototypes -------------// +#if CFG_TUH_CDC_CH34X +#include "serial/ch34x.h" + +static uint16_t const ch34x_vids_pids[][2] = { CFG_TUH_CDC_CH34X_VID_PID_LIST }; +enum { + CH34X_VID_PID_COUNT = sizeof ( ch34x_vids_pids ) / sizeof ( ch34x_vids_pids[0] ) +}; + +static bool ch34x_open ( uint8_t daddr, tusb_desc_interface_t const *itf_desc, uint16_t max_len ); +static void ch34x_process_config ( tuh_xfer_t* xfer ); + +static bool ch34x_set_modem_ctrl ( cdch_interface_t* p_cdc, uint16_t line_state, tuh_xfer_cb_t complete_cb, uintptr_t user_data ); +static bool ch34x_set_baudrate ( cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data ); +#endif + + enum { SERIAL_DRIVER_ACM = 0, @@ -131,6 +158,10 @@ enum { #if CFG_TUH_CDC_CP210X SERIAL_DRIVER_CP210X, #endif + +#if CFG_TUH_CDC_CH34X + SERIAL_DRIVER_CH34X, +#endif }; typedef struct { @@ -159,6 +190,13 @@ static const cdch_serial_driver_t serial_drivers[] = { .set_baudrate = cp210x_set_baudrate }, #endif + + #if CFG_TUH_CDC_CH34X + { .process_set_config = ch34x_process_config, + .set_control_line_state = ch34x_set_modem_ctrl, + .set_baudrate = ch34x_set_baudrate + }, +#endif }; enum { @@ -426,6 +464,12 @@ static void cdch_internal_control_complete(tuh_xfer_t* xfer) break; #endif + #if CFG_TUH_CDC_CH34X + case SERIAL_DRIVER_CH34X: + TU_ASSERT(false, ); // see special ch34x_control_complete function + break; + #endif + default: break; } } @@ -641,7 +685,7 @@ bool cdch_open(uint8_t rhport, uint8_t daddr, tusb_desc_interface_t const *itf_d { return acm_open(daddr, itf_desc, max_len); } - #if CFG_TUH_CDC_FTDI || CFG_TUH_CDC_CP210X + #if CFG_TUH_CDC_FTDI || CFG_TUH_CDC_CP210X || CFG_TUH_CDC_CH34X else if ( 0xff == itf_desc->bInterfaceClass ) { uint16_t vid, pid; @@ -666,8 +710,16 @@ bool cdch_open(uint8_t rhport, uint8_t daddr, tusb_desc_interface_t const *itf_d } } #endif + + #if CFG_TUH_CDC_CH34X + for (size_t i = 0; i < CH34X_VID_PID_COUNT; i++) { + if ( ch34x_vids_pids[i][0] == vid && ch34x_vids_pids[i][1] == pid ) { + return ch34x_open(daddr, itf_desc, max_len); + } + } + #endif } - #endif + #endif // CFG_TUH_CDC_FTDI || CFG_TUH_CDC_CP210X || CFG_TUH_CDC_CH34X return false; } @@ -1176,4 +1228,412 @@ static void cp210x_process_config(tuh_xfer_t* xfer) { #endif +//--------------------------------------------------------------------+ +// CH34x +//--------------------------------------------------------------------+ + +#if CFG_TUH_CDC_CH34X + +enum { + CONFIG_CH34X_STEP1 = 0, + CONFIG_CH34X_STEP2, + CONFIG_CH34X_STEP3, + CONFIG_CH34X_STEP4, + CONFIG_CH34X_STEP5, + CONFIG_CH34X_STEP6, + CONFIG_CH34X_STEP7, + CONFIG_CH34X_STEP8, + CONFIG_CH34X_COMPLETE +}; + +static bool ch34x_open ( uint8_t daddr, tusb_desc_interface_t const *itf_desc, uint16_t max_len ) +{ + // CH34x Interface includes 1 vendor interface + 3 bulk endpoints + TU_VERIFY ( itf_desc->bNumEndpoints == 3 ); + TU_VERIFY ( sizeof ( tusb_desc_interface_t ) + 2 * sizeof ( tusb_desc_endpoint_t ) <= max_len ); + + cdch_interface_t *p_cdc = make_new_itf ( daddr, itf_desc ); + TU_VERIFY ( p_cdc ); + + TU_LOG_DRV ( "CH34x opened\r\n" ); + p_cdc->serial_drid = SERIAL_DRIVER_CH34X; + + // endpoint pair + tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) tu_desc_next ( itf_desc ); + + // data endpoints expected to be in pairs + return open_ep_stream_pair ( p_cdc, desc_ep ); +} + +static bool ch34x_set_request ( cdch_interface_t* p_cdc, uint8_t direction, uint8_t request, uint16_t value, uint16_t index, uint8_t* buffer, uint16_t length, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + tusb_control_request_t const request_setup = { + .bmRequestType_bit = { + .recipient = TUSB_REQ_RCPT_DEVICE, + .type = TUSB_REQ_TYPE_VENDOR, + .direction = direction + }, + .bRequest = request, + .wValue = tu_htole16 ( value ), + .wIndex = tu_htole16 ( index ), + .wLength = tu_htole16 ( length ) + }; + + // use usbh enum buf since application variable does not live long enough + uint8_t* enum_buf = NULL; + + if ( buffer && length > 0 ) { + enum_buf = usbh_get_enum_buf(); + tu_memcpy_s ( enum_buf, CFG_TUH_ENUMERATION_BUFSIZE, buffer, length ); + } + + tuh_xfer_t xfer = { + .daddr = p_cdc->daddr, + .ep_addr = 0, + .setup = &request_setup, + .buffer = enum_buf, + .complete_cb = complete_cb, + // CH34x needs a special handling of bInterfaceNumber, because wIndex is used for other purposes and not for bInterfaceNumber + .user_data = (uintptr_t)( ( p_cdc->bInterfaceNumber & 0xff ) << 8 ) | ( user_data & 0xff ) + }; + + return tuh_control_xfer ( &xfer ); + return false; +} + +static bool ch341_control_out ( cdch_interface_t* p_cdc, uint8_t request, uint16_t value, uint16_t index, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + return ch34x_set_request ( p_cdc, TUSB_DIR_OUT, request, value, index, /* buffer */ NULL, /* length */ 0, complete_cb, user_data ); +} + +static bool ch341_control_in ( cdch_interface_t* p_cdc, uint8_t request, uint16_t value, uint16_t index, uint8_t *buffer, uint16_t buffersize, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + return ch34x_set_request ( p_cdc, TUSB_DIR_IN, request, value, index, buffer, buffersize, complete_cb, user_data ); +} + +static int32_t ch341_write_reg ( cdch_interface_t* p_cdc, uint16_t reg, uint16_t value, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + return ch341_control_out ( p_cdc, CH341_REQ_WRITE_REG, /* value */ reg, /* index */ value, complete_cb, user_data ); +} + +static int32_t ch341_read_reg_request ( cdch_interface_t* p_cdc, uint16_t reg, uint8_t *buffer, uint16_t buffersize, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + return ch341_control_in ( p_cdc, CH341_REQ_READ_REG, reg, /* index */ 0, buffer, buffersize, complete_cb, user_data ); +} + +/* + * The device line speed is given by the following equation: + * + * baudrate = 48000000 / (2^(12 - 3 * ps - fact) * div), where + * + * 0 <= ps <= 3, + * 0 <= fact <= 1, + * 2 <= div <= 256 if fact = 0, or + * 9 <= div <= 256 if fact = 1 + */ +// calculate baudrate devisors +// Parts of this functions have been taken over from Linux driver /drivers/usb/serial/ch341.c +static int32_t ch341_get_divisor ( cdch_interface_t* p_cdc, uint32_t speed ) +{ + uint32_t fact, div, clk_div; + bool force_fact0 = false; + int32_t ps; + static const uint32_t ch341_min_rates[] = { + CH341_MIN_RATE(0), + CH341_MIN_RATE(1), + CH341_MIN_RATE(2), + CH341_MIN_RATE(3), + }; + + /* + * Clamp to supported range, this makes the (ps < 0) and (div < 2) + * sanity checks below redundant. + */ + inline uint32_t max ( uint32_t val, uint32_t maxval ) { return val > maxval ? val : maxval; } + inline uint32_t min ( uint32_t val, uint32_t minval ) { return val < minval ? val : minval; } + inline uint32_t clamp_val ( uint32_t val, uint32_t minval, uint32_t maxval ) { return min ( max ( val, minval ), maxval ); } + speed = clamp_val(speed, CH341_MIN_BPS, CH341_MAX_BPS); + + /* + * Start with highest possible base clock (fact = 1) that will give a + * divisor strictly less than 512. + */ + fact = 1; + for (ps = 3; ps >= 0; ps--) { + if (speed > ch341_min_rates[ps]) + break; + } + + if (ps < 0) + return -EINVAL; + + /* Determine corresponding divisor, rounding down. */ + clk_div = CH341_CLK_DIV(ps, fact); + div = CH341_CLKRATE / (clk_div * speed); + + /* Some devices require a lower base clock if ps < 3. */ + if (ps < 3 && (p_cdc->ch34x.quirks & CH341_QUIRK_LIMITED_PRESCALER)) + force_fact0 = true; + + /* Halve base clock (fact = 0) if required. */ + if (div < 9 || div > 255 || force_fact0) { + div /= 2; + clk_div *= 2; + fact = 0; + } + + if (div < 2) + return -EINVAL; + + /* + * Pick next divisor if resulting rate is closer to the requested one, + * scale up to avoid rounding errors on low rates. + */ + if (16 * CH341_CLKRATE / (clk_div * div) - 16 * speed >= + 16 * speed - 16 * CH341_CLKRATE / (clk_div * (div + 1))) + div++; + + /* + * Prefer lower base clock (fact = 0) if even divisor. + * + * Note that this makes the receiver more tolerant to errors. + */ + if (fact == 1 && div % 2 == 0) { + div /= 2; + fact = 0; + } + + return (0x100 - div) << 8 | fact << 2 | ps; +} + +// set baudrate (low level) +// do not confuse with ch34x_set_baudrate +// Parts of this functions have been taken over from Linux driver /drivers/usb/serial/ch341.c +static int32_t ch341_set_baudrate ( cdch_interface_t* p_cdc, uint32_t baud_rate, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + int val; + + if (!baud_rate) + return -EINVAL; + + val = ch341_get_divisor(p_cdc, baud_rate); + if (val < 0) + return -EINVAL; + + /* + * CH341A buffers data until a full endpoint-size packet (32 bytes) + * has been received unless bit 7 is set. + * + * At least one device with version 0x27 appears to have this bit + * inverted. + */ + if ( p_cdc->ch34x.version > 0x27 ) + val |= BIT(7); + + return ch341_write_reg ( p_cdc, CH341_REG_DIVISOR << 8 | CH341_REG_PRESCALER, val, complete_cb, user_data ); +} + +// set lcr register +// Parts of this functions have been taken over from Linux driver /drivers/usb/serial/ch341.c +static int32_t ch341_set_lcr ( cdch_interface_t* p_cdc, uint8_t lcr, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + /* + * Chip versions before version 0x30 as read using + * CH341_REQ_READ_VERSION used separate registers for line control + * (stop bits, parity and word length). Version 0x30 and above use + * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero. + */ + if ( p_cdc->ch34x.version < 0x30 ) + return 0; + + return ch341_write_reg ( p_cdc, CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr, complete_cb, user_data ); +} + +// set handshake (modem controls) +// Parts of this functions have been taken over from Linux driver /drivers/usb/serial/ch341.c +static int32_t ch341_set_handshake ( cdch_interface_t* p_cdc, uint8_t control, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + return ch341_control_out ( p_cdc, CH341_REQ_MODEM_CTRL, /* value */ ~control, /* index */ 0, complete_cb, user_data ); +} + +// detect quirks (special versions of CH34x) +// Parts of this functions have been taken over from Linux driver /drivers/usb/serial/ch341.c +static int32_t ch341_detect_quirks ( tuh_xfer_t* xfer, cdch_interface_t* p_cdc, uint8_t step, uint8_t *buffer, uint16_t buffersize, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + /* + * A subset of CH34x devices does not support all features. The + * prescaler is limited and there is no support for sending a RS232 + * break condition. A read failure when trying to set up the latter is + * used to detect these devices. + */ + switch ( step ) + { + case 1: + p_cdc->ch34x.quirks = 0; + return ch341_read_reg_request ( p_cdc, CH341_REG_BREAK, buffer, buffersize, complete_cb, user_data ); + break; + case 2: + if ( xfer->result != XFER_RESULT_SUCCESS ) + p_cdc->ch34x.quirks |= CH341_QUIRK_LIMITED_PRESCALER | CH341_QUIRK_SIMULATE_BREAK; + return true; + break; + default: + TU_ASSERT ( false ); // suspicious step + break; + } +} + +// internal control complete to update state such as line state, encoding +// CH34x needs a special interface recovery due to abnormal wIndex usage +static void ch34x_control_complete(tuh_xfer_t* xfer) +{ + uint8_t const itf_num = (uint8_t)( ( xfer->user_data & 0xff00 ) >> 8 ); + uint8_t const idx = tuh_cdc_itf_get_index ( xfer->daddr, itf_num ); + cdch_interface_t *p_cdc = get_itf ( idx ); + TU_ASSERT ( p_cdc, ); + TU_ASSERT ( p_cdc->serial_drid == SERIAL_DRIVER_CH34X, ); // ch34x_control_complete is only used for CH34x + + if (xfer->result == XFER_RESULT_SUCCESS) { + switch (xfer->setup->bRequest) { + case CH341_REQ_WRITE_REG: { // register write request + switch ( tu_le16toh ( xfer->setup->wValue ) ) { + case ( CH341_REG_DIVISOR << 8 | CH341_REG_PRESCALER ): { // baudrate write + p_cdc->line_coding.bit_rate = p_cdc->ch34x.baud_rate; + break; + } + default: { + TU_ASSERT(false, ); // unexpected register write + break; + } + } + break; + } + default: { + TU_ASSERT(false, ); // unexpected request + break; + } + } + xfer->complete_cb = p_cdc->user_control_cb; + if (xfer->complete_cb) + xfer->complete_cb(xfer); + } +} + +static bool ch34x_set_baudrate ( cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) // do not confuse with ch341_set_baudrate +{ + TU_LOG_DRV("CDC CH34x Set BaudRate = %lu\r\n", baudrate); + uint32_t baud_le = tu_htole32(baudrate); + p_cdc->ch34x.baud_rate = baudrate; + p_cdc->user_control_cb = complete_cb; + return ch341_set_baudrate ( p_cdc, baud_le, complete_cb ? ch34x_control_complete : NULL, user_data ); +} + +static bool ch34x_set_modem_ctrl ( cdch_interface_t* p_cdc, uint16_t line_state, tuh_xfer_cb_t complete_cb, uintptr_t user_data ) +{ + TU_LOG_DRV("CDC CH34x Set Control Line State\r\n"); + // todo later + return false; +} + +static void ch34x_process_config ( tuh_xfer_t* xfer ) +{ + uintptr_t const state = xfer->user_data & 0xff; + // CH34x needs a special handling of bInterfaceNumber, because wIndex is used for other purposes and not for bInterfaceNumber + uint8_t const itf_num = (uint8_t)( ( xfer->user_data & 0xff00 ) >> 8 ); + uint8_t const idx = tuh_cdc_itf_get_index ( xfer->daddr, itf_num ); + cdch_interface_t *p_cdc = get_itf ( idx ); + uint8_t buffer [ CH34X_BUFFER_SIZE ]; + cdc_line_coding_t line_coding = CFG_TUH_CDC_LINE_CODING_ON_ENUM; + TU_ASSERT ( p_cdc, ); + + if ( state == 0 ) { + // defaults + p_cdc->ch34x.baud_rate = DEFAULT_BAUD_RATE; + p_cdc->ch34x.mcr = 0; + p_cdc->ch34x.msr = 0; + p_cdc->ch34x.quirks = 0; + p_cdc->ch34x.version = 0; + /* + * Some CH340 devices appear unable to change the initial LCR + * settings, so set a sane 8N1 default. + */ + p_cdc->ch34x.lcr = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX | CH341_LCR_CS8; + } + // This process flow has been taken over from Linux driver /drivers/usb/serial/ch341.c + switch ( state ) { + case CONFIG_CH34X_STEP1: // request version read + TU_ASSERT ( ch341_control_in ( p_cdc, /* request */ CH341_REQ_READ_VERSION, /* value */ 0, /* index */ 0, buffer, CH34X_BUFFER_SIZE, ch34x_process_config, CONFIG_CH34X_STEP2 ), ); + break; + case CONFIG_CH34X_STEP2: // handle version read data, request to init CH34x + p_cdc->ch34x.version = xfer->buffer[0]; + TU_LOG_DRV ( "Chip version=%02x\r\n", p_cdc->ch34x.version ); + TU_ASSERT ( ch341_control_out ( p_cdc, /* request */ CH341_REQ_SERIAL_INIT, /* value */ 0, /* index */ 0, ch34x_process_config, CONFIG_CH34X_STEP3 ), ); + break; + case CONFIG_CH34X_STEP3: // set baudrate with default values (see above) + TU_ASSERT ( ch341_set_baudrate ( p_cdc, p_cdc->ch34x.baud_rate, ch34x_process_config, CONFIG_CH34X_STEP4 ) > 0, ); + break; + case CONFIG_CH34X_STEP4: // set line controls with default values (see above) + TU_ASSERT ( ch341_set_lcr ( p_cdc, p_cdc->ch34x.lcr, ch34x_process_config, CONFIG_CH34X_STEP5 ) > 0, ); + break; + case CONFIG_CH34X_STEP5: // set handshake RTS/DTR + TU_ASSERT ( ch341_set_handshake ( p_cdc, p_cdc->ch34x.mcr, ch34x_process_config, CONFIG_CH34X_STEP6 ) > 0, ); + break; + case CONFIG_CH34X_STEP6: // detect quirks step 1 + TU_ASSERT ( ch341_detect_quirks ( xfer, p_cdc, /* step */ 1, buffer, CH34X_BUFFER_SIZE, ch34x_process_config, CONFIG_CH34X_STEP7 ) > 0, ); + break; + case CONFIG_CH34X_STEP7: // detect quirks step 2 and set baudrate with configured values + TU_ASSERT ( ch341_detect_quirks ( xfer, p_cdc, /* step */ 2, NULL, 0, NULL, 0 ) > 0, ); +#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM + TU_ASSERT ( ch34x_set_baudrate ( p_cdc, line_coding.bit_rate, ch34x_process_config, CONFIG_CH34X_STEP8 ), ); +#else + TU_ATTR_FALLTHROUGH; #endif + break; + case CONFIG_CH34X_STEP8: // set data/stop bit quantities, parity +#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM + p_cdc->ch34x.lcr = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX; + switch ( line_coding.data_bits ) { + case 5: + p_cdc->ch34x.lcr |= CH341_LCR_CS5; + break; + case 6: + p_cdc->ch34x.lcr |= CH341_LCR_CS6; + break; + case 7: + p_cdc->ch34x.lcr |= CH341_LCR_CS7; + break; + case 8: + p_cdc->ch34x.lcr |= CH341_LCR_CS8; + break; + default: + TU_ASSERT ( false, ); // not supported data_bits + p_cdc->ch34x.lcr |= CH341_LCR_CS8; + break; + } + if ( line_coding.parity != CDC_LINE_CODING_PARITY_NONE ) { + p_cdc->ch34x.lcr |= CH341_LCR_ENABLE_PAR; + if ( line_coding.parity == CDC_LINE_CODING_PARITY_EVEN || line_coding.parity == CDC_LINE_CODING_PARITY_SPACE ) + p_cdc->ch34x.lcr |= CH341_LCR_PAR_EVEN; + if ( line_coding.parity == CDC_LINE_CODING_PARITY_MARK || line_coding.parity == CDC_LINE_CODING_PARITY_SPACE ) + p_cdc->ch34x.lcr |= CH341_LCR_MARK_SPACE; + } + TU_ASSERT ( line_coding.stop_bits == CDC_LINE_CODING_STOP_BITS_1 || line_coding.stop_bits == CDC_LINE_CODING_STOP_BITS_2, ); // not supported 1.5 stop bits + if ( line_coding.stop_bits == CDC_LINE_CODING_STOP_BITS_2 ) + p_cdc->ch34x.lcr |= CH341_LCR_STOP_BITS_2; + TU_ASSERT ( ch341_set_lcr ( p_cdc, p_cdc->ch34x.lcr, ch34x_process_config, CONFIG_CH34X_COMPLETE ) > 0, ); +#else + TU_ATTR_FALLTHROUGH; +#endif + break; + case CONFIG_CH34X_COMPLETE: + set_config_complete ( p_cdc, idx, itf_num ); + break; + default: + TU_ASSERT ( false, ); + break; + } +} + +#endif // CFG_TUH_CDC_CH34X + +#endif // (CFG_TUH_ENABLED && CFG_TUH_CDC) diff --git a/src/class/cdc/serial/ch34x.h b/src/class/cdc/serial/ch34x.h new file mode 100644 index 000000000..94e18b252 --- /dev/null +++ b/src/class/cdc/serial/ch34x.h @@ -0,0 +1,113 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Heiko Kuester (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CH34X_H_ +#define _CH34X_H_ + +#include + +#define BIT(nr) ( (uint32_t)1 << (nr) ) + +#define CH34X_BUFFER_SIZE 2 + +// The following defines have been taken over from Linux driver /drivers/usb/serial/ch341.c + +#define DEFAULT_BAUD_RATE 9600 + +/* flags for IO-Bits */ +#define CH341_BIT_RTS (1 << 6) +#define CH341_BIT_DTR (1 << 5) + +/******************************/ +/* interrupt pipe definitions */ +/******************************/ +/* always 4 interrupt bytes */ +/* first irq byte normally 0x08 */ +/* second irq byte base 0x7d + below */ +/* third irq byte base 0x94 + below */ +/* fourth irq byte normally 0xee */ + +/* second interrupt byte */ +#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */ + +/* status returned in third interrupt answer byte, inverted in data + from irq */ +#define CH341_BIT_CTS 0x01 +#define CH341_BIT_DSR 0x02 +#define CH341_BIT_RI 0x04 +#define CH341_BIT_DCD 0x08 +#define CH341_BITS_MODEM_STAT 0x0f /* all bits */ + +/* Break support - the information used to implement this was gleaned from + * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato. + */ + +// USB requests +#define CH341_REQ_READ_VERSION 0x5F // dec 95 +#define CH341_REQ_WRITE_REG 0x9A +#define CH341_REQ_READ_REG 0x95 +#define CH341_REQ_SERIAL_INIT 0xA1 +#define CH341_REQ_MODEM_CTRL 0xA4 + +// CH34x registers +#define CH341_REG_BREAK 0x05 +#define CH341_REG_PRESCALER 0x12 +#define CH341_REG_DIVISOR 0x13 +#define CH341_REG_LCR 0x18 +#define CH341_REG_LCR2 0x25 + +#define CH341_NBREAK_BITS 0x01 + +// line control bits +#define CH341_LCR_ENABLE_RX 0x80 +#define CH341_LCR_ENABLE_TX 0x40 +#define CH341_LCR_MARK_SPACE 0x20 +#define CH341_LCR_PAR_EVEN 0x10 +#define CH341_LCR_ENABLE_PAR 0x08 +#define CH341_LCR_STOP_BITS_2 0x04 +#define CH341_LCR_CS8 0x03 +#define CH341_LCR_CS7 0x02 +#define CH341_LCR_CS6 0x01 +#define CH341_LCR_CS5 0x00 + +#define CH341_QUIRK_LIMITED_PRESCALER BIT(0) +#define CH341_QUIRK_SIMULATE_BREAK BIT(1) + +#define CH341_CLKRATE 48000000 +#define CH341_CLK_DIV(ps, fact) (1 << (12 - 3 * (ps) - (fact))) +#define CH341_MIN_RATE(ps) (CH341_CLKRATE / (CH341_CLK_DIV((ps), 1) * 512)) + +/* Supported range is 46 to 3000000 bps. */ +#define CH341_MIN_BPS DIV_ROUND_UP(CH341_CLKRATE, CH341_CLK_DIV(0, 0) * 256) +#define CH341_MAX_BPS (CH341_CLKRATE / (CH341_CLK_DIV(3, 0) * 2)) + +#define DIV_ROUND_UP __KERNEL_DIV_ROUND_UP +#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) + +// error codes +#define EINVAL 22 /* Invalid argument */ + +#endif /* _CH34X_H_ */ diff --git a/src/tusb_option.h b/src/tusb_option.h index a76281c0c..13151a07b 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -470,6 +470,23 @@ 0xEA60, 0xEA70 #endif +#ifndef CFG_TUH_CDC_CH34X + // CH34X is not part of CDC class, only to re-use CDC driver API + #define CFG_TUH_CDC_CH34X 0 +#endif + +#ifndef CFG_TUH_CDC_CH34X_VID_PID_LIST + // List of product IDs that can use the CH34X CDC driver + #define CFG_TUH_CDC_CH34X_VID_PID_LIST \ + { 0x1a86, 0x7523 }, /* ch340 chip */ \ + { 0x1a86, 0x7522 }, /* ch340k chip */ \ + { 0x1a86, 0x5523 }, /* ch341 chip */ \ + { 0x1a86, 0xe523 }, /* ch330 chip */ \ + { 0x4348, 0x5523 }, /* ch340 custom chip */ \ + { 0x2184, 0x0057 }, /* overtaken from Linux driver /drivers/usb/serial/ch341.c */ \ + { 0x9986, 0x7523 } /* overtaken from Linux driver /drivers/usb/serial/ch341.c */ +#endif + #ifndef CFG_TUH_HID #define CFG_TUH_HID 0 #endif -- cgit v1.3.1 From 98781bb903d94190d57ad4b9436a85a31d67404c Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 19 Jan 2024 15:58:05 +0700 Subject: - add ch34x_set_data_format() - add ch34x_set_line_coding() --- examples/host/cdc_msc_hid/src/cdc_app.c | 68 ++++++++++------------ src/class/cdc/cdc_host.c | 100 ++++++++++++++++++++++---------- src/class/cdc/serial/ch34x.h | 3 +- 3 files changed, 102 insertions(+), 69 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index a1b26e49c..81052047c 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -27,20 +27,11 @@ #include "tusb.h" #include "bsp/board_api.h" -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - - -//------------- IMPLEMENTATION -------------// - -size_t get_console_inputs(uint8_t* buf, size_t bufsize) -{ +size_t get_console_inputs(uint8_t* buf, size_t bufsize) { size_t count = 0; - while (count < bufsize) - { + while (count < bufsize) { int ch = board_getchar(); - if ( ch <= 0 ) break; + if (ch <= 0) break; buf[count] = (uint8_t) ch; count++; @@ -49,22 +40,18 @@ size_t get_console_inputs(uint8_t* buf, size_t bufsize) return count; } -void cdc_app_task(void) -{ - uint8_t buf[64+1]; // +1 for extra null character - uint32_t const bufsize = sizeof(buf)-1; +void cdc_app_task(void) { + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; uint32_t count = get_console_inputs(buf, bufsize); buf[count] = 0; // loop over all mounted interfaces - for(uint8_t idx=0; idx cdc interfaces - if (count) - { + if (count) { tuh_cdc_write(idx, buf, count); tuh_cdc_write_flush(idx); } @@ -72,11 +59,14 @@ void cdc_app_task(void) } } +//--------------------------------------------------------------------+ +// TinyUSB callbacks +//--------------------------------------------------------------------+ + // Invoked when received new data -void tuh_cdc_rx_cb(uint8_t idx) -{ - uint8_t buf[64+1]; // +1 for extra null character - uint32_t const bufsize = sizeof(buf)-1; +void tuh_cdc_rx_cb(uint8_t idx) { + uint8_t buf[64 + 1]; // +1 for extra null character + uint32_t const bufsize = sizeof(buf) - 1; // forward cdc interfaces -> console uint32_t count = tuh_cdc_read(idx, buf, bufsize); @@ -85,29 +75,31 @@ void tuh_cdc_rx_cb(uint8_t idx) printf((char*) buf); } -void tuh_cdc_mount_cb(uint8_t idx) -{ - tuh_itf_info_t itf_info = { 0 }; +// Invoked when a device with CDC interface is mounted +// idx is index of cdc interface in the internal pool. +void tuh_cdc_mount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = {0}; tuh_cdc_itf_get_info(idx, &itf_info); - printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); + printf("CDC Interface is mounted: address = %u, itf_num = %u\r\n", itf_info.daddr, + itf_info.desc.bInterfaceNumber); #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration // otherwise you need to call tuh_cdc_set_line_coding() first - cdc_line_coding_t line_coding = { 0 }; - if ( tuh_cdc_get_local_line_coding(idx, &line_coding) ) - { + cdc_line_coding_t line_coding = {0}; + if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); - printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity , line_coding.data_bits); + printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } #endif } -void tuh_cdc_umount_cb(uint8_t idx) -{ - tuh_itf_info_t itf_info = { 0 }; +// Invoked when a device with CDC interface is unmounted +void tuh_cdc_umount_cb(uint8_t idx) { + tuh_itf_info_t itf_info = {0}; tuh_cdc_itf_get_info(idx, &itf_info); - printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, itf_info.desc.bInterfaceNumber); + printf("CDC Interface is unmounted: address = %u, itf_num = %u\r\n", itf_info.daddr, + itf_info.desc.bInterfaceNumber); } diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index bfaa64a77..37fa30982 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -1327,48 +1327,88 @@ static void ch34x_control_complete(tuh_xfer_t* xfer) { process_internal_control_complete(p_cdc, xfer); } -//static bool ch34x_set_data_format(cdch_interface_t* p_cdc, uint8_t stop_bits, uint8_t parity, uint8_t data_bits, -// tuh_xfer_cb_t complete_cb, uintptr_t user_data) { -// uint8_t const lcr = ch34x_get_lcr(stop_bits, parity, data_bits); -// p_cdc->requested_line_coding.stop_bits = stop_bits; -// p_cdc->requested_line_coding.parity = parity; -// p_cdc->requested_line_coding.data_bits = data_bits; -// -// TU_ASSERT (ch34x_control_out(p_cdc, CH34X_REQ_WRITE_REG, CH32X_REG16_LCR2_LCR, lcr, -// complete_cb ? ch34x_control_complete : NULL, user_data)); -// return false; -//} +static bool ch34x_set_data_format(cdch_interface_t* p_cdc, uint8_t stop_bits, uint8_t parity, uint8_t data_bits, + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { + p_cdc->requested_line_coding.stop_bits = stop_bits; + p_cdc->requested_line_coding.parity = parity; + p_cdc->requested_line_coding.data_bits = data_bits; + + uint8_t const lcr = ch34x_get_lcr(stop_bits, parity, data_bits); + TU_ASSERT (ch34x_control_out(p_cdc, CH34X_REQ_WRITE_REG, CH32X_REG16_LCR2_LCR, lcr, + complete_cb ? ch34x_control_complete : NULL, user_data)); + return true; +} -static bool ch34x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) { +static bool ch34x_write_reg_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { uint16_t const div_ps = ch34x_get_divisor_prescaler(baudrate); TU_VERIFY(div_ps != 0); + TU_ASSERT(ch34x_write_reg(p_cdc, CH34X_REG16_DIVISOR_PRESCALER, div_ps, + complete_cb, user_data)); + return true; +} +static bool ch34x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { p_cdc->requested_line_coding.bit_rate = baudrate; p_cdc->user_control_cb = complete_cb; - TU_ASSERT(ch34x_write_reg(p_cdc, CH34X_REG16_DIVISOR_PRESCALER, div_ps, - complete_cb ? ch34x_control_complete : NULL, user_data)); - + TU_ASSERT(ch34x_write_reg_baudrate(p_cdc, baudrate, + complete_cb ? ch34x_control_complete : NULL, user_data)); return true; } -//static void ch34x_set_line_coding_stage1(tuh_xfer_t* xfer) { -// -//} +static void ch34x_set_line_coding_stage1_complete(tuh_xfer_t* xfer) { + uint8_t const itf_num = 0; + uint8_t const idx = tuh_cdc_itf_get_index(xfer->daddr, itf_num); + cdch_interface_t* p_cdc = get_itf(idx); + TU_ASSERT(p_cdc, ); + if (xfer->result == XFER_RESULT_SUCCESS) { + // stage 1 success, continue to stage 2 + p_cdc->line_coding.bit_rate = p_cdc->requested_line_coding.bit_rate; + TU_ASSERT(ch34x_set_data_format(p_cdc, p_cdc->requested_line_coding.stop_bits, p_cdc->requested_line_coding.parity, + p_cdc->requested_line_coding.data_bits, ch34x_control_complete, xfer->user_data), ); + } else { + // stage 1 failed, notify user + xfer->complete_cb = p_cdc->user_control_cb; + if (xfer->complete_cb) { + xfer->complete_cb(xfer); + } + } +} + +// 2 stages: set baudrate (stage1) + set data format (stage2) static bool ch34x_set_line_coding(cdch_interface_t* p_cdc, cdc_line_coding_t const* line_coding, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { -// p_cdc->baudrate_requested = line_coding->bit_rate; -// p_cdc->user_control_cb = complete_cb; -// uint8_t factor, divisor, lcr; -// TU_ASSERT (ch34x_get_factor_divisor(line_coding->bit_rate, &factor, &divisor)); -// TU_ASSERT (ch34x_get_lcr(line_coding, &lcr)); -// TU_ASSERT (ch34x_control_out(p_cdc, CH34X_REQ_SERIAL_INIT, (uint16_t) (lcr << 8 | 0x9c), (uint16_t) (factor << 8 | 0x80 | divisor), -// complete_cb ? ch34x_control_complete : NULL, user_data)); - (void) p_cdc; - (void) line_coding; - (void) complete_cb; - (void) user_data; + p_cdc->requested_line_coding = *line_coding; + p_cdc->user_control_cb = complete_cb; + + if (complete_cb) { + // stage 1 set baudrate + TU_ASSERT(ch34x_write_reg_baudrate(p_cdc, line_coding->bit_rate, + ch34x_set_line_coding_stage1_complete, user_data)); + } else { + // sync call + xfer_result_t result; + + // stage 1 set baudrate + TU_ASSERT(ch34x_write_reg_baudrate(p_cdc, line_coding->bit_rate, NULL, (uintptr_t) &result)); + TU_VERIFY(result == XFER_RESULT_SUCCESS); + p_cdc->line_coding.bit_rate = line_coding->bit_rate; + + // stage 2 set data format + TU_ASSERT(ch34x_set_data_format(p_cdc, line_coding->stop_bits, line_coding->parity, line_coding->data_bits, + NULL, (uintptr_t) &result)); + TU_VERIFY(result == XFER_RESULT_SUCCESS); + p_cdc->line_coding.stop_bits = line_coding->stop_bits; + p_cdc->line_coding.parity = line_coding->parity; + p_cdc->line_coding.data_bits = line_coding->data_bits; + + // update transfer result, user_data is expected to point to xfer_result_t + if (user_data) { + user_data = result; + } + } return true; } diff --git a/src/class/cdc/serial/ch34x.h b/src/class/cdc/serial/ch34x.h index 3f78a3007..5def8d212 100644 --- a/src/class/cdc/serial/ch34x.h +++ b/src/class/cdc/serial/ch34x.h @@ -63,7 +63,8 @@ #define CH341_REG_0x2C 0x2C // undocumented register #define CH341_REG_0x27 0x27 // hardware flow control (cts/rts) -#define CH34X_REG16_DIVISOR_PRESCALER TU_U16(CH34X_REG_DIVISOR, CH34X_REG_PRESCALER) +#define CH34X_REG16_DIVISOR_PRESCALER TU_U16(CH34X_REG_DIVISOR, CH34X_REG_PRESCALER) +#define CH32X_REG16_LCR2_LCR TU_U16(CH34X_REG_LCR2, CH34X_REG_LCR) // modem control bits #define CH34X_BIT_RTS ( 1 << 6 ) -- cgit v1.3.1 From 87d509d416ea7c250f4256f897f6cc9a7b7d2121 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 20 Jan 2024 01:42:31 +0700 Subject: make CFG_TUH_CDC_LINE_CODING_ON_ENUM optional for ch34x --- examples/host/cdc_msc_hid/src/cdc_app.c | 8 ++++++-- src/class/cdc/cdc_host.c | 19 ++++++++++++++----- src/class/cdc/serial/ch34x.h | 12 +----------- 3 files changed, 21 insertions(+), 18 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index 81052047c..e275e7943 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -85,13 +85,17 @@ void tuh_cdc_mount_cb(uint8_t idx) { itf_info.desc.bInterfaceNumber); #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM - // CFG_TUH_CDC_LINE_CODING_ON_ENUM must be defined for line coding is set by tinyusb in enumeration - // otherwise you need to call tuh_cdc_set_line_coding() first + // If CFG_TUH_CDC_LINE_CODING_ON_ENUM is defined, line coding will be set by tinyusb stack + // while eneumerating new cdc device cdc_line_coding_t line_coding = {0}; if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } +#else + // Set Line Coding upon mounted + cdc_line_coding_t new_line_coding = { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }; + tuh_cdc_set_line_coding(idx, &new_line_coding, NULL, 0); #endif } diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index f5182efc2..cd948243d 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -1510,10 +1510,11 @@ static void ch34x_process_config(tuh_xfer_t* xfer) { uint8_t const idx = tuh_cdc_itf_get_index(xfer->daddr, itf_num); cdch_interface_t* p_cdc = get_itf(idx); uintptr_t const state = xfer->user_data; - cdc_line_coding_t const line_coding = CFG_TUH_CDC_LINE_CODING_ON_ENUM_CH34X; uint8_t buffer[2]; // TODO remove TU_ASSERT (p_cdc,); + // TODO check xfer->result + switch (state) { case CONFIG_CH34X_READ_VERSION: TU_LOG_DRV("[%u] CDCh CH34x attempt to read Chip Version\r\n", p_cdc->daddr); @@ -1527,20 +1528,28 @@ static void ch34x_process_config(tuh_xfer_t* xfer) { // only versions >= 0x30 are tested, below 0x30 seems having other programming, see drivers from WCH vendor, Linux kernel and FreeBSD TU_ASSERT (version >= 0x30,); + #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM + cdc_line_coding_t const line_coding = CFG_TUH_CDC_LINE_CODING_ON_ENUM; + uint8_t const lcr = ch34x_get_lcr(line_coding.stop_bits, line_coding.parity, line_coding.data_bits); + uint16_t const first_arg = tu_u16(lcr, 0x9c); uint16_t const div_ps = ch34x_get_divisor_prescaler(line_coding.bit_rate); TU_ASSERT(div_ps != 0, ); - - uint8_t const lcr = ch34x_get_lcr(line_coding.stop_bits, line_coding.parity, line_coding.data_bits); + #else + uint16_t const first_arg = 0; + uint16_t const div_ps = 0; + #endif // Init CH34x with line coding - TU_ASSERT (ch34x_control_out(p_cdc, CH34X_REQ_SERIAL_INIT, tu_u16(lcr, 0x9c), div_ps, + TU_ASSERT (ch34x_control_out(p_cdc, CH34X_REQ_SERIAL_INIT, first_arg, div_ps, ch34x_process_config, CONFIG_CH34X_SPECIAL_REG_WRITE),); break; } case CONFIG_CH34X_SPECIAL_REG_WRITE: // do special reg write, purpose unknown, overtaken from WCH driver - p_cdc->line_coding = line_coding; + #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM + p_cdc->line_coding = ((cdc_line_coding_t) CFG_TUH_CDC_LINE_CODING_ON_ENUM); + #endif TU_ASSERT (ch34x_write_reg(p_cdc, 0x0f2c, 0x0007, ch34x_process_config, CONFIG_CH34X_FLOW_CONTROL),); break; diff --git a/src/class/cdc/serial/ch34x.h b/src/class/cdc/serial/ch34x.h index 5def8d212..b9121afb3 100644 --- a/src/class/cdc/serial/ch34x.h +++ b/src/class/cdc/serial/ch34x.h @@ -27,21 +27,11 @@ #ifndef _CH34X_H_ #define _CH34X_H_ -// For simplicity, only the name CH34X is used here, -// but specifically only CH340 and CH341 are supported. - -// There is no official documentation for the CH34x chips. Reference can be found +// There is no official documentation for the CH34x (CH340, CH341) chips. Reference can be found // - https://github.com/WCHSoftGroup/ch341ser_linux // - https://github.com/torvalds/linux/blob/master/drivers/usb/serial/ch341.c // - https://github.com/freebsd/freebsd-src/blob/main/sys/dev/usb/serial/uchcom.c -// set line_coding @ enumeration -#ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM_CH34X CFG_TUH_CDC_LINE_CODING_ON_ENUM -#else // this default is necessary to work properly -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM_CH34X { 9600, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } -#endif - // USB requests #define CH34X_REQ_READ_VERSION 0x5F // dec 95 #define CH34X_REQ_WRITE_REG 0x9A // dec 154 -- cgit v1.3.1 From 9b6f13716f34d6a82a60c8c6ec7969d420a8af28 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 4 Mar 2024 16:08:35 +0700 Subject: correct rp2040 host with max3421 --- examples/host/bare_api/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- examples/host/hid_controller/src/tusb_config.h | 2 +- examples/host/msc_file_explorer/src/tusb_config.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'examples/host') diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index 05ffbdf75..432446e94 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 76d59c316..a59a0ffb9 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index bb7c3388d..35de5ee50 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -76,7 +76,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index 8ddaddda7..3ac591d8f 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index 1703761a4..c798b4383 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -71,7 +71,7 @@ #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_RPI_PIO_USB 1 // use max3421 as host controller + // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) -- cgit v1.3.1 From baffadca914bada1663fbb444246ecad681365fb Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Mar 2024 17:54:08 +0700 Subject: remove pca10095 suppport for max3421 also remove pico_bootsel_via_double_reset from rp2040 --- examples/host/CMakeLists.txt | 1 + hw/bsp/nrf/boards/pca10095/board.cmake | 3 --- hw/bsp/rp2040/family.cmake | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-) (limited to 'examples/host') diff --git a/examples/host/CMakeLists.txt b/examples/host/CMakeLists.txt index bedd2220b..e6a2ece14 100644 --- a/examples/host/CMakeLists.txt +++ b/examples/host/CMakeLists.txt @@ -8,5 +8,6 @@ family_initialize_project(tinyusb_host_examples ${CMAKE_CURRENT_LIST_DIR}) # family_add_subdirectory will filter what to actually add based on selected FAMILY family_add_subdirectory(bare_api) family_add_subdirectory(cdc_msc_hid) +family_add_subdirectory(cdc_msc_hid_freertos) family_add_subdirectory(hid_controller) family_add_subdirectory(msc_file_explorer) diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index 0fbc1d31f..ca5399a3a 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -1,9 +1,6 @@ set(MCU_VARIANT nrf5340_application) set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) -# enable max3421 host driver for this board -set(MAX3421_HOST 1) - function(update_board TARGET) target_sources(${TARGET} PRIVATE ${NRFX_DIR}/drivers/src/nrfx_usbreg.c diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index ec40806fd..861d20bdd 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -171,7 +171,7 @@ function(family_configure_target TARGET RTOS) pico_add_extra_outputs(${TARGET}) pico_enable_stdio_uart(${TARGET} 1) - target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board${RTOS_SUFFIX} tinyusb_additions) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_board${RTOS_SUFFIX} tinyusb_additions) family_flash_openocd(${TARGET} ${OPENOCD_OPTION}) family_flash_jlink(${TARGET}) -- cgit v1.3.1 From 94c27fcdf77cdc4599df232b7785dfc5d3cc7407 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Mar 2024 20:19:12 +0700 Subject: skip rp2040 build for cdc_msc_hid_freertos --- examples/host/cdc_msc_hid_freertos/only.txt | 1 - 1 file changed, 1 deletion(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 3837ac8a2..81d993ffa 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -6,7 +6,6 @@ mcu:LPC43XX mcu:MIMXRT1XXX mcu:MIMXRT10XX mcu:MIMXRT11XX -mcu:RP2040 mcu:MSP432E4 mcu:RX65X mcu:RAXXX -- cgit v1.3.1 From f603c4a330f55158da7782671158fedabb62c29c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 4 Apr 2024 13:01:16 +0700 Subject: skip cdc_msc_hid_freertos example for rp2040 --- examples/host/cdc_msc_hid_freertos/skip.txt | 1 + 1 file changed, 1 insertion(+) create mode 100644 examples/host/cdc_msc_hid_freertos/skip.txt (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid_freertos/skip.txt b/examples/host/cdc_msc_hid_freertos/skip.txt new file mode 100644 index 000000000..2ba4438fd --- /dev/null +++ b/examples/host/cdc_msc_hid_freertos/skip.txt @@ -0,0 +1 @@ +mcu:RP2040 -- cgit v1.3.1 From c8e533e61222aa3ccdda291709abd6215e685d95 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 14:54:35 +0700 Subject: fix build with nrfx v3, though max3421e spi does not seem to work well. --- examples/host/cdc_msc_hid/src/cdc_app.c | 4 +-- hw/bsp/nrf/family.c | 52 ++++++++++++++++++++++++++++----- hw/bsp/nrf/linker/nrf52840_s140_v6.ld | 10 +++++-- hw/bsp/nrf/linker/nrf52840_xxaa.ld | 8 ++--- hw/bsp/nrf/nrfx_config.h | 1 + 5 files changed, 60 insertions(+), 15 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index e275e7943..4a13f8b27 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -72,7 +72,7 @@ void tuh_cdc_rx_cb(uint8_t idx) { uint32_t count = tuh_cdc_read(idx, buf, bufsize); buf[count] = 0; - printf((char*) buf); + printf("%s", (char*) buf); } // Invoked when a device with CDC interface is mounted @@ -89,7 +89,7 @@ void tuh_cdc_mount_cb(uint8_t idx) { // while eneumerating new cdc device cdc_line_coding_t line_coding = {0}; if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { - printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } #else diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 897d27c59..deae64f05 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -107,6 +107,11 @@ TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) { #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 static void max3421_init(void); static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(1); + +#if NRFX_VER > 2 +static nrfx_gpiote_t _gpiote = NRFX_GPIOTE_INSTANCE(0); +#endif + #endif //--------------------------------------------------------------------+ @@ -141,7 +146,7 @@ void board_init(void) { SysTick_Config(SystemCoreClock / 1000); // UART - #if NRFX_VER == 2 + #if NRFX_VER <= 2 nrfx_uarte_config_t uart_cfg = { .pseltxd = UART_TX_PIN, .pselrxd = UART_RX_PIN, @@ -155,7 +160,7 @@ void board_init(void) { .parity = NRF_UARTE_PARITY_EXCLUDED, } }; - #elif NRFX_VER == 3 + #else nrfx_uarte_config_t uart_cfg = { .txd_pin = UART_TX_PIN, .rxd_pin = UART_RX_PIN, @@ -263,7 +268,7 @@ int board_uart_read(uint8_t* buf, int len) { int board_uart_write(void const* buf, int len) { nrfx_err_t err = nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len - #if NRFX_VER == 3 + #if NRFX_VER > 2 ,0 #endif ); @@ -324,8 +329,16 @@ void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) { //--------------------------------------------------------------------+ #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 -void max3421_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { - if (!(pin == MAX3421_INTR_PIN && action == NRF_GPIOTE_POLARITY_HITOLO)) return; +#if NRFX_VER <= 2 +void max3421_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action ) { + if (action != NRF_GPIOTE_POLARITY_HITOLO) return; +#else +void max3421_int_handler(nrfx_gpiote_pin_t pin, nrfx_gpiote_trigger_t action, void* p_context) { + (void) p_context; + if (action != NRFX_GPIOTE_TRIGGER_HITOLO) return; +#endif + + if (pin != MAX3421_INTR_PIN) return; tuh_int_handler(1, true); } @@ -341,7 +354,11 @@ static void max3421_init(void) { .sck_pin = MAX3421_SCK_PIN, .mosi_pin = MAX3421_MOSI_PIN, .miso_pin = MAX3421_MISO_PIN, + #if NRFX_VER <= 2 .ss_pin = NRFX_SPIM_PIN_NOT_USED, + #else + .ss_pin = NRF_SPIM_PIN_NOT_CONNECTED, + #endif .ss_active_high = false, .irq_priority = 3, .orc = 0xFF, @@ -355,14 +372,35 @@ static void max3421_init(void) { nrfx_spim_init(&_spi, &cfg, NULL, NULL); // max3421e interrupt pin + #if NRFX_VER <= 2 nrfx_gpiote_init(1); nrfx_gpiote_in_config_t in_config = NRFX_GPIOTE_CONFIG_IN_SENSE_HITOLO(true); in_config.pull = NRF_GPIO_PIN_PULLUP; - NVIC_SetPriority(GPIOTE_IRQn, 2); - nrfx_gpiote_in_init(MAX3421_INTR_PIN, &in_config, max3421_int_handler); nrfx_gpiote_trigger_enable(MAX3421_INTR_PIN, true); + #else + nrf_gpio_pin_pull_t intr_pull = NRF_GPIO_PIN_PULLUP; + nrfx_gpiote_trigger_config_t intr_trigger = { + .trigger = NRFX_GPIOTE_TRIGGER_HITOLO, + .p_in_channel = NULL, // sensing mechanism + }; + nrfx_gpiote_handler_config_t intr_handler = { + .handler = max3421_int_handler, + .p_context = NULL, + }; + nrfx_gpiote_input_pin_config_t intr_config = { + .p_pull_config = &intr_pull, + .p_trigger_config = &intr_trigger, + .p_handler_config = &intr_handler, + }; + + nrfx_gpiote_init(&_gpiote, 1); + NVIC_SetPriority(GPIOTE_IRQn, 2); + + nrfx_gpiote_input_configure(&_gpiote, MAX3421_INTR_PIN, &intr_config); + nrfx_gpiote_trigger_enable(&_gpiote, MAX3421_INTR_PIN, true); + #endif } // API to enable/disable MAX3421 INTR pin interrupt diff --git a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld index 7cc94a405..037a14196 100644 --- a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld @@ -5,7 +5,7 @@ SEARCH_DIR(.) MEMORY { - FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 + FLASH (rx) : ORIGIN = 0x26000, LENGTH = 0xED000 - 0x26000 /* SRAM required by S132 depend on * - Attribute Table Size @@ -14,7 +14,7 @@ MEMORY * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue */ - RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 + RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } SECTIONS @@ -36,3 +36,9 @@ SECTIONS } INSERT AFTER .data; INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf52840_xxaa.ld b/hw/bsp/nrf/linker/nrf52840_xxaa.ld index 377c248bb..2d20ba7ac 100644 --- a/hw/bsp/nrf/linker/nrf52840_xxaa.ld +++ b/hw/bsp/nrf/linker/nrf52840_xxaa.ld @@ -14,7 +14,7 @@ MEMORY INCLUDE "nrf_common.ld" /* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ -/*__tbss_start__ = __tbss_start;*/ -/*__tbss_end__ = __tbss_end;*/ -/*__sbss_start__ = __sbss_start;*/ -/*__sbss_end__ = __sbss_end;*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/nrfx_config.h b/hw/bsp/nrf/nrfx_config.h index 95ef33ce4..fbec4192b 100644 --- a/hw/bsp/nrf/nrfx_config.h +++ b/hw/bsp/nrf/nrfx_config.h @@ -6,6 +6,7 @@ #define NRFX_CLOCK_ENABLED 0 #define NRFX_GPIOTE_ENABLED 1 +#define NRFX_GPIOTE0_ENABLED 1 #define NRFX_UARTE_ENABLED 1 #define NRFX_UARTE0_ENABLED 1 -- cgit v1.3.1 From 62331f02070bdb1bec2890885008e9f88b06bdb6 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 15:55:50 +0700 Subject: fix nrfx v3 spim freq when init fix clang build with nrf --- examples/host/cdc_msc_hid/src/msc_app.c | 4 ++-- hw/bsp/nrf/boards/pca10059/pca10059.ld | 8 +++++++- hw/bsp/nrf/boards/pca10095/board.cmake | 1 - hw/bsp/nrf/boards/pca10100/board.cmake | 1 - hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake | 1 - hw/bsp/nrf/family.c | 6 ++++-- hw/bsp/nrf/family.cmake | 18 +++++++++--------- hw/bsp/nrf/linker/nrf52833_xxaa.ld | 20 ++++++++++++++++++++ hw/bsp/nrf/linker/nrf5340_xxaa_application.ld | 21 +++++++++++++++++++++ src/class/cdc/cdc_host.c | 4 ++-- src/host/usbh.c | 2 +- 11 files changed, 66 insertions(+), 20 deletions(-) create mode 100644 hw/bsp/nrf/linker/nrf52833_xxaa.ld create mode 100644 hw/bsp/nrf/linker/nrf5340_xxaa_application.ld (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index e9c9676b8..1d7e18e6e 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -48,8 +48,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/hw/bsp/nrf/boards/pca10059/pca10059.ld b/hw/bsp/nrf/boards/pca10059/pca10059.ld index 510bfdd8c..adc80f3c4 100644 --- a/hw/bsp/nrf/boards/pca10059/pca10059.ld +++ b/hw/bsp/nrf/boards/pca10059/pca10059.ld @@ -1,7 +1,7 @@ /* Linker script to configure memory regions. */ SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ MEMORY { @@ -11,3 +11,9 @@ MEMORY INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index ca5399a3a..95dd30969 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf5340_application) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) function(update_board TARGET) target_sources(${TARGET} PRIVATE diff --git a/hw/bsp/nrf/boards/pca10100/board.cmake b/hw/bsp/nrf/boards/pca10100/board.cmake index c30026815..a925dae80 100644 --- a/hw/bsp/nrf/boards/pca10100/board.cmake +++ b/hw/bsp/nrf/boards/pca10100/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52833) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52833_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake index 693d7beed..cc370aac8 100644 --- a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52840) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index deae64f05..aff851ddc 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -356,20 +356,22 @@ static void max3421_init(void) { .miso_pin = MAX3421_MISO_PIN, #if NRFX_VER <= 2 .ss_pin = NRFX_SPIM_PIN_NOT_USED, + .frequency = NRF_SPIM_FREQ_4M, #else .ss_pin = NRF_SPIM_PIN_NOT_CONNECTED, + .frequency = 4000000u, #endif .ss_active_high = false, .irq_priority = 3, .orc = 0xFF, // default setting 4 Mhz, Mode 0, MSB first - .frequency = NRF_SPIM_FREQ_4M, .mode = NRF_SPIM_MODE_0, .bit_order = NRF_SPIM_BIT_ORDER_MSB_FIRST, + .miso_pull = NRF_GPIO_PIN_NOPULL, }; // no handler --> blocking - nrfx_spim_init(&_spi, &cfg, NULL, NULL); + TU_ASSERT(NRFX_SUCCESS == nrfx_spim_init(&_spi, &cfg, NULL, NULL), ); // max3421e interrupt pin #if NRFX_VER <= 2 diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 52a6fc196..56ff62bc4 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -30,8 +30,14 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) + if (MCU_VARIANT STREQUAL "nrf5340_application") + set(MCU_VARIANT_XXAA "nrf5340_xxaa_application") + else () + set(MCU_VARIANT_XXAA "${MCU_VARIANT}_xxaa") + endif () + if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) endif () set(LD_FILE_Clang ${LD_FILE_GNU}) @@ -50,19 +56,13 @@ function(add_board_target BOARD_TARGET) ${NRFX_DIR}/soc/nrfx_atomic.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) + string(TOUPPER "${MCU_VARIANT_XXAA}" MCU_VARIANT_XXAA_UPPER) target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS CONFIG_GPIO_AS_PINRESET + ${MCU_VARIANT_XXAA_UPPER} ) - if (MCU_VARIANT STREQUAL "nrf52840") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52840_XXAA) - elseif (MCU_VARIANT STREQUAL "nrf52833") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52833_XXAA) - elseif (MCU_VARIANT STREQUAL "nrf5340_application") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA NRF5340_XXAA_APPLICATION) - endif () - if (TRACE_ETM STREQUAL "1") # ENABLE_TRACE will cause system_nrf5x.c to set up ETM trace target_compile_definitions(${BOARD_TARGET} PUBLIC ENABLE_TRACE) diff --git a/hw/bsp/nrf/linker/nrf52833_xxaa.ld b/hw/bsp/nrf/linker/nrf52833_xxaa.ld new file mode 100644 index 000000000..ae4d0e5b3 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf52833_xxaa.ld @@ -0,0 +1,20 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x20000 + CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x20000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld new file mode 100644 index 000000000..31762d0b2 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld @@ -0,0 +1,21 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x100000 + EXTFLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x8000000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 + RAM1 (rwx) : ORIGIN = 0x20040000, LENGTH = 0x3F000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 5bdd41f1f..133a10f6e 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -1079,7 +1079,7 @@ static uint32_t ftdi_232bm_baud_to_divisor(uint32_t baud) { static bool ftdi_sio_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { uint16_t const divisor = (uint16_t) ftdi_232bm_baud_to_divisor(baudrate); - TU_LOG_DRV("CDC FTDI Set BaudRate = %lu, divisor = 0x%04x\r\n", baudrate, divisor); + TU_LOG_DRV("CDC FTDI Set BaudRate = %" PRIu32 ", divisor = 0x%04x\r\n", baudrate, divisor); p_cdc->user_control_cb = complete_cb; p_cdc->requested_line_coding.bit_rate = baudrate; @@ -1222,7 +1222,7 @@ static bool cp210x_set_line_coding(cdch_interface_t* p_cdc, cdc_line_coding_t co } static bool cp210x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_LOG_DRV("CDC CP210x Set BaudRate = %lu\r\n", baudrate); + TU_LOG_DRV("CDC CP210x Set BaudRate = %" PRIu32 "\r\n", baudrate); uint32_t baud_le = tu_htole32(baudrate); p_cdc->user_control_cb = complete_cb; return cp210x_set_request(p_cdc, CP210X_SET_BAUDRATE, 0, (uint8_t *) &baud_le, 4, diff --git a/src/host/usbh.c b/src/host/usbh.c index f8fddf394..7a47f5056 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -704,7 +704,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t tusb_control_request_t const * request = &_ctrl_xfer.request; if (XFER_RESULT_SUCCESS != result) { - TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); + TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %" PRIu32 "\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); TU_LOG_BUF_USBH(request, 8); // terminate transfer if any stage failed -- cgit v1.3.1 From c097c85dcf8e0ef3ea052c146c5f514101827251 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 16:17:22 +0700 Subject: fix print lu format warnings with clang --- examples/device/audio_test_multi_rate/src/main.c | 2 +- examples/device/cdc_uac2/src/uac2_app.c | 4 ++-- examples/device/uac2_headset/src/main.c | 4 ++-- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 4 ++-- examples/host/cdc_msc_hid_freertos/src/msc_app.c | 4 ++-- examples/host/msc_file_explorer/src/msc_app.c | 6 +++--- src/CMakeLists.txt | 2 +- src/class/cdc/cdc_device.c | 13 ++++++------- src/class/usbtmc/usbtmc_device.c | 2 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 2 +- tools/get_deps.py | 3 ++- 12 files changed, 24 insertions(+), 24 deletions(-) (limited to 'examples/host') diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 3e7f40dac..2ff7f10bd 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -272,7 +272,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * sampFreq = (uint32_t)((audio_control_cur_4_t *)pBuff)->bCur; - TU_LOG2("Clock set current freq: %lu\r\n", sampFreq); + TU_LOG2("Clock set current freq: %" PRIu32 "\r\n", sampFreq); return true; break; diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index 98659ea68..c57d98a1a 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -69,7 +69,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -118,7 +118,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index fbd7ffe22..0ea6e7025 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -157,7 +157,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -206,7 +206,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 14725996d..940840a30 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -420,5 +420,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - printf((char*)temp_buf); + printf("%s", (char*)temp_buf); } diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 6ff513be1..7d246af67 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -117,7 +117,7 @@ void tuh_cdc_rx_cb(uint8_t idx) { uint32_t count = tuh_cdc_read(idx, buf, bufsize); buf[count] = 0; - printf((char *) buf); + printf("%s", (char *) buf); } void tuh_cdc_mount_cb(uint8_t idx) { @@ -131,7 +131,7 @@ void tuh_cdc_mount_cb(uint8_t idx) { // otherwise you need to call tuh_cdc_set_line_coding() first cdc_line_coding_t line_coding = { 0 }; if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { - printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index ee02ba917..9ffd5d965 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -47,8 +47,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_dat uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024 * 1024) / block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024 * 1024) / block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index ecea614a2..f323e30f0 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -114,7 +114,7 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); // printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); // For simplicity: we only mount 1 LUN per device @@ -541,10 +541,10 @@ void cli_cmd_ls(EmbeddedCli *cli, char *args, void *context) printf("%-40s", fno.fname); if (fno.fsize < 1024) { - printf("%lu B\r\n", fno.fsize); + printf("%" PRIu32 " B\r\n", fno.fsize); }else { - printf("%lu KB\r\n", fno.fsize / 1024); + printf("%" PRIu32 " KB\r\n", fno.fsize / 1024); } } } diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 076e1e1eb..272962332 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -41,7 +41,7 @@ function(add_tinyusb TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../lib/networking ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") target_compile_options(${TARGET} PRIVATE -Wall -Wextra diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 7ef0530ec..2e0a0c30d 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -43,10 +43,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ - BULK_PACKET_SIZE = (TUD_OPT_HIGH_SPEED ? 512 : 64) -}; +#define BULK_PACKET_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) typedef struct { @@ -176,9 +173,11 @@ uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); // flush if queue more than packet size - // may need to suppress -Wunreachable-code since most of the time CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE - if ( (tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE) || ((CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE) && tu_fifo_full(&p_cdc->tx_ff)) ) - { + if ( tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE + #if CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE + || tu_fifo_full(&p_cdc->tx_ff) // check full if fifo size is less than packet size + #endif + ) { tud_cdc_n_write_flush(itf); } diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 286cbe108..f6cddfbd7 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -360,7 +360,7 @@ uint16_t usbtmcd_open_cb(uint8_t rhport, tusb_desc_interface_t const * itf_desc, // processing a command (such as a clear). Returns true if it was // in the NAK state and successfully transitioned to the ACK wait // state. -bool tud_usbtmc_start_bus_read() +bool tud_usbtmc_start_bus_read(void) { usbtmcd_state_enum oldState = usbtmc_state.state; switch(oldState) diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 56e7f39a0..2fe721d6b 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -147,7 +147,7 @@ static void start_dma(volatile uint32_t* reg_startep) { static void edpt_dma_start(volatile uint32_t* reg_startep) { if (atomic_flag_test_and_set(&_dcd.dma_running)) { - usbd_defer_func((osal_task_func_t) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); + usbd_defer_func((osal_task_func_t)(uintptr_t ) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); } else { start_dma(reg_startep); } diff --git a/tools/get_deps.py b/tools/get_deps.py index cfa60002a..e08246178 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -177,7 +177,8 @@ deps_optional = { '20285262657d1b482d132d20d755c8c330d55c1f', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x' 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5' - 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb'], + 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb' + 'sam3x samd11 samd21 samd51 same5x same7x saml2x samg'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From db30eee0fcacda2b2f3f208ddf5ab9be723129d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 18:08:41 +0700 Subject: clang tested with mcb1800, add heap to lpc18 linker --- examples/host/msc_file_explorer/src/main.c | 17 +++++------- examples/host/msc_file_explorer/src/msc_app.c | 1 - hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 34 ++++++++++++++++------- hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 37 ++++++++++++++++++-------- hw/bsp/lpc18/family.cmake | 8 +++--- hw/bsp/nrf/family.cmake | 3 +-- src/portable/ehci/ehci.c | 2 +- 7 files changed, 64 insertions(+), 38 deletions(-) (limited to 'examples/host') diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 73f3e9eb5..f6b6810f5 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -72,8 +72,7 @@ extern bool msc_app_init(void); extern void msc_app_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host MassStorage Explorer Example\r\n"); @@ -87,8 +86,7 @@ int main(void) msc_app_init(); - while (1) - { + while (1) { // tinyusb host task tuh_task(); @@ -103,28 +101,25 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { (void) dev_addr; } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { (void) dev_addr; } //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index f323e30f0..ddd39c674 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -95,7 +95,6 @@ void msc_app_task(void) // //--------------------------------------------------------------------+ - bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld index f1a3add8f..8562a6e71 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -311,6 +311,20 @@ SECTIONS PROVIDE(end = .); } > RamLoc40 AT> RamLoc40 /* > RamLoc32 AT> RamLoc32 */ + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamLoc40 */ .noinit_RAM2 (NOLOAD) : ALIGN(4) { @@ -383,15 +397,17 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 837dec364..02ea1088e 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -255,7 +255,6 @@ SECTIONS *(COMMON) . = ALIGN(4) ; _ebss = .; - PROVIDE(end = .); } > RamLoc40 /* RamLoc32 */ /* NOINIT section for RamLoc40 */ @@ -266,6 +265,20 @@ SECTIONS . = ALIGN(4) ; } > RamLoc40 + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) { @@ -298,19 +311,21 @@ SECTIONS . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 78f4c510b..bf8efabba 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -47,9 +47,11 @@ function(add_board_target BOARD_TARGET) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 56ff62bc4..1d6702720 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -39,7 +39,6 @@ function(add_board_target BOARD_TARGET) if (NOT DEFINED LD_FILE_GNU) set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) @@ -89,7 +88,7 @@ function(add_board_target BOARD_TARGET) ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" + "LINKER:--script=${LD_FILE_GNU}" -L${NRFX_DIR}/mdk ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index e145cbb1b..01bbf62bf 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -92,7 +92,7 @@ CFG_TUH_MEM_SECTION TU_ATTR_ALIGNED(4096) static ehci_data_t ehci_data; //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= (EHCI_DBG + 1) +#if 0 && CFG_TUSB_DEBUG >= (EHCI_DBG + 1) static inline void print_portsc(ehci_registers_t* regs) { TU_LOG_HEX(EHCI_DBG, regs->portsc); TU_LOG(EHCI_DBG, " Connect Status : %u\r\n", regs->portsc_bm.current_connect_status); -- cgit v1.3.1 From b67cb26e51c7f31db0cf71c6c1ce5430bbbbb7f5 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 24 Apr 2024 16:17:33 +0700 Subject: change hil board s3 devkitm (devkitc seems to have usb issue with cp2104) --- .github/workflows/build_aarch64.yml | 2 +- .github/workflows/build_cmake.yml | 4 +- .github/workflows/build_esp.yml | 6 +-- .github/workflows/build_renesas.yml | 2 +- .github/workflows/build_riscv.yml | 2 +- examples/build_system/make/make.mk | 60 ++++++++++++------------- examples/build_system/make/toolchain/arm_gcc.mk | 3 ++ examples/build_system/make/toolchain/arm_iar.mk | 2 + examples/device/cdc_msc_freertos/Makefile | 2 +- examples/device/hid_composite_freertos/Makefile | 2 +- examples/host/cdc_msc_hid_freertos/Makefile | 2 +- hw/bsp/board.c | 13 +++--- hw/bsp/board_api.h | 1 + test/hil/hil_pi4.json | 6 +-- 14 files changed, 56 insertions(+), 51 deletions(-) (limited to 'examples/host') diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml index e5dbf9494..237692498 100644 --- a/.github/workflows/build_aarch64.yml +++ b/.github/workflows/build_aarch64.yml @@ -47,7 +47,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 1f74bda70..65de47e8d 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -168,7 +168,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ @@ -216,7 +216,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index d283c6535..4108a58a5 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -34,7 +34,7 @@ jobs: # ESP32-S2 - 'espressif_kaluga_1' # ESP32-S3 - - 'espressif_s3_devkitc' + - 'espressif_s3_devkitm' steps: - name: Setup Python uses: actions/setup-python@v5 @@ -51,7 +51,7 @@ jobs: run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build_esp32.py ${{ matrix.board }} - name: Upload Artifacts for Hardware Testing - if: matrix.board == 'espressif_s3_devkitc' && github.repository_owner == 'hathach' + if: matrix.board == 'espressif_s3_devkitm' && github.repository_owner == 'hathach' uses: actions/upload-artifact@v4 with: name: ${{ matrix.board }} @@ -75,7 +75,7 @@ jobs: fail-fast: false matrix: board: - - 'espressif_s3_devkitc' + - 'espressif_s3_devkitm' steps: - name: Clean workspace run: | diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index ec06c9426..fbc12d285 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -46,7 +46,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml index e891a3a51..7f5031ff1 100644 --- a/.github/workflows/build_riscv.yml +++ b/.github/workflows/build_riscv.yml @@ -48,7 +48,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk index 772befca4..2437b8766 100644 --- a/examples/build_system/make/make.mk +++ b/examples/build_system/make/make.mk @@ -15,6 +15,8 @@ TOP = $(abspath $(subst make.mk,../../..,$(THIS_MAKEFILE))) # Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) +#-------------- Linux/Windows ------------ + # Detect whether shell style is windows or not # https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 ifeq '$(findstring ;,$(PATH))' ';' @@ -26,13 +28,18 @@ CMDEXE := 1 SHELL := cmd.exe endif -# Handy check parameter function -check_defined = \ - $(strip $(foreach 1,$1, \ - $(call __check_defined,$1,$(strip $(value 2))))) -__check_defined = \ - $(if $(value $1),, \ - $(error Undefined make flag: $1$(if $2, ($2)))) +ifeq ($(CMDEXE),1) + CP = copy + RM = del + MKDIR = mkdir + PYTHON = python +else + CP = cp + RM = rm + MKDIR = mkdir + PYTHON = python3 +endif + # Build directory BUILD := _build/$(BOARD) @@ -44,8 +51,8 @@ BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) # Board without family ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) -BOARD_PATH := hw/bsp/$(BOARD) -FAMILY := + BOARD_PATH := hw/bsp/$(BOARD) + FAMILY := endif # Board within family @@ -68,31 +75,12 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif -#-------------- Toolchain ------------ - -# Supported toolchain: gcc, iar +#------------------------------------------------------------- +# Toolchain +# Can be changed via TOOLCHAIN=gcc|iar or CC=arm-none-eabi-gcc|iccarm|clang +#------------------------------------------------------------- TOOLCHAIN ?= gcc -# Can be set by board, default to ARM GCC -CROSS_COMPILE ?= arm-none-eabi- - -ifeq ($(TOOLCHAIN),iar) -CC := iccarm -USE_IAR = 1 -endif - -ifeq ($(CMDEXE),1) - CP = copy - RM = del - MKDIR = mkdir - PYTHON = python -else - CP = cp - RM = rm - MKDIR = mkdir - PYTHON = python3 -endif - #-------------- Source files and compiler flags -------------- # tinyusb makefile include $(TOP)/src/tinyusb.mk @@ -143,3 +131,11 @@ endif # toolchain specific include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk + +# Handy check parameter function +check_defined = \ + $(strip $(foreach 1,$1, \ + $(call __check_defined,$1,$(strip $(value 2))))) +__check_defined = \ + $(if $(value $1),, \ + $(error Undefined make flag: $1$(if $2, ($2)))) diff --git a/examples/build_system/make/toolchain/arm_gcc.mk b/examples/build_system/make/toolchain/arm_gcc.mk index ed5ddc970..c34581ae2 100644 --- a/examples/build_system/make/toolchain/arm_gcc.mk +++ b/examples/build_system/make/toolchain/arm_gcc.mk @@ -1,5 +1,8 @@ # makefile for arm gcc toolchain +# Can be set by family, default to ARM GCC +CROSS_COMPILE ?= arm-none-eabi- + CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ AS = $(CC) -x assembler-with-cpp diff --git a/examples/build_system/make/toolchain/arm_iar.mk b/examples/build_system/make/toolchain/arm_iar.mk index 04c9f22b3..17967b41a 100644 --- a/examples/build_system/make/toolchain/arm_iar.mk +++ b/examples/build_system/make/toolchain/arm_iar.mk @@ -1,4 +1,6 @@ # makefile for arm iar toolchain + +CC = iccarm AS = iasmarm LD = ilinkarm OBJCOPY = ielftool --silent diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 13f336f99..fe3fb6482 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,7 +1,7 @@ include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index add9e9814..88d602393 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -3,7 +3,7 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index 5351a6248..bf4725f47 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -1,7 +1,7 @@ include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 996ac9263..cdef5e1e5 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -25,6 +25,14 @@ #include "board_api.h" +//--------------------------------------------------------------------+ +// Board API +//--------------------------------------------------------------------+ +int board_getchar(void) { + char c; + return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); +} + //--------------------------------------------------------------------+ // newlib read()/write() retarget //--------------------------------------------------------------------+ @@ -126,8 +134,3 @@ FILE *const stdin = &__stdio; __strong_reference(stdin, stdout); __strong_reference(stdin, stderr); #endif - -int board_getchar(void) { - char c; - return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); -} diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 418ce3551..f21a32371 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -142,6 +142,7 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars uint8_t uid[16] TU_ATTR_ALIGNED(4); size_t uid_len; + // TODO work with make, but not working with esp32s3 cmake if ( board_get_unique_id ) { uid_len = board_get_unique_id(uid, sizeof(uid)); }else { diff --git a/test/hil/hil_pi4.json b/test/hil/hil_pi4.json index 17d9ff1fa..8aff81910 100644 --- a/test/hil/hil_pi4.json +++ b/test/hil/hil_pi4.json @@ -8,13 +8,13 @@ "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" }, { - "name": "espressif_s3_devkitc", - "uid": "7CDFA1E073CC", + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", "tests": [ "cdc_msc_freertos", "hid_composite_freertos" ], "flasher": "esptool", - "flasher_sn": "461cb8d7decdeb119be9b506e93fd3f1", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", "flasher_args": "-b 1500000" }, { -- cgit v1.3.1 From 1e7091dae98ea3eeba4789364c290199b157c368 Mon Sep 17 00:00:00 2001 From: tyustli <43946994+tyustli@users.noreply.github.com> Date: Thu, 25 Apr 2024 19:47:12 +0800 Subject: fix ci error --- examples/host/bare_api/src/main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'examples/host') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 14725996d..b1d388bf9 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -34,6 +34,7 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "class/hid/hid.h" // English #define LANGUAGE_ID 0x0409 -- cgit v1.3.1 From 2e995d7cf4b2971e3ca7167a097b99832c8d61ce Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Apr 2024 20:23:40 +0700 Subject: adding support for esp32 for use with max3421e host --- examples/device/board_test/src/tusb_config.h | 2 +- examples/device/cdc_msc_freertos/src/main.c | 6 +-- examples/device/cdc_msc_freertos/src/tusb_config.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 6 +-- .../hid_composite_freertos/src/tusb_config.h | 2 +- examples/device/video_capture/src/main.c | 4 +- examples/device/video_capture/src/tusb_config.h | 2 +- examples/device/video_capture_2ch/src/main.c | 4 +- .../device/video_capture_2ch/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 6 +-- .../host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- hw/bsp/board_api.h | 2 +- .../boards/adafruit_feather_esp32_v2/board.cmake | 2 + .../boards/adafruit_feather_esp32_v2/board.h | 53 ++++++++++++++++++++++ hw/bsp/espressif/boards/family.c | 19 ++++---- .../components/tinyusb_src/CMakeLists.txt | 12 +---- hw/bsp/espressif/family.cmake | 6 +-- src/common/tusb_mcu.h | 5 +- src/portable/analog/max3421/hcd_max3421.c | 2 +- src/tusb_option.h | 2 + 21 files changed, 94 insertions(+), 49 deletions(-) create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h (limited to 'examples/host') diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 1a27cc87f..36eafe807 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -49,7 +49,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index e94e8eaec..607d40270 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -111,14 +111,14 @@ int main(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 91efe7d40..e743c9148 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ff2cb635e..2bd545bc2 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -113,14 +113,14 @@ int main(void) xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 3ba9bf311..0689e0f23 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 2a2b0961f..ddb51e03a 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -288,7 +288,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -344,7 +344,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index bdfc37d87..21483a2da 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index eb1cf2580..e8c2ec6b0 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -296,7 +296,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -352,7 +352,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index fe66d63b5..43c7dfc90 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 7d246af67..f3495ab28 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 069cbdc90..a6cb4d460 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -107,14 +107,14 @@ int main(void) { xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 35de5ee50..0aab2cd2f 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index f21a32371..eee9ed9c5 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -39,7 +39,7 @@ extern "C" { #include "tusb.h" #if CFG_TUSB_OS == OPT_OS_FREERTOS -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake new file mode 100644 index 000000000..18c956714 --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32") diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h new file mode 100644 index 000000000..0c53df06b --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 0 +#define NEOPIXEL_POWER_PIN 2 +#define NEOPIXEL_POWER_STATE 1 + +#define BUTTON_PIN 38 +#define BUTTON_STATE_ACTIVE 0 + +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI3_HOST +#define MAX3421_SCK_PIN 5 +#define MAX3421_MOSI_PIN 19 +#define MAX3421_MISO_PIN 21 +#define MAX3421_CS_PIN 33 +#define MAX3421_INTR_PIN 15 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 5599d1504..02e478a0c 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -30,8 +30,12 @@ #include "esp_rom_gpio.h" #include "esp_mac.h" #include "hal/gpio_ll.h" + +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) #include "hal/usb_hal.h" #include "soc/usb_periph.h" +static void configure_pins(usb_hal_context_t* usb); +#endif #include "driver/gpio.h" #include "driver/uart.h" @@ -56,7 +60,6 @@ static led_strip_handle_t led_strip; static void max3421_init(void); #endif -static void configure_pins(usb_hal_context_t* usb); //--------------------------------------------------------------------+ // Implementation @@ -100,7 +103,6 @@ void board_init(void) { }; ESP_ERROR_CHECK(led_strip_new_rmt_device(&strip_config, &rmt_config, &led_strip)); - led_strip_clear(led_strip); // off #endif @@ -109,6 +111,7 @@ void board_init(void) { gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) // USB Controller Hal init periph_module_reset(PERIPH_USB_MODULE); periph_module_enable(PERIPH_USB_MODULE); @@ -118,12 +121,14 @@ void board_init(void) { }; usb_hal_init(&hal); configure_pins(&hal); +#endif #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif } +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) static void configure_pins(usb_hal_context_t* usb) { /* usb_periph_iopins currently configures USB_OTG as USB Device. * Introduce additional parameters in usb_hal_context_t when adding support @@ -153,6 +158,7 @@ static void configure_pins(usb_hal_context_t* usb) { gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); } } +#endif //--------------------------------------------------------------------+ // Board porting API @@ -208,15 +214,12 @@ SemaphoreHandle_t max3421_intr_sem; static void IRAM_ATTR max3421_isr_handler(void* arg) { (void) arg; // arg is gpio num - gpio_set_level(13, 1); BaseType_t xHigherPriorityTaskWoken = pdFALSE; xSemaphoreGiveFromISR(max3421_intr_sem, &xHigherPriorityTaskWoken); if (xHigherPriorityTaskWoken) { portYIELD_FROM_ISR(); } - - gpio_set_level(13, 0); } static void max3421_intr_task(void* param) { @@ -250,16 +253,12 @@ static void max3421_init(void) { spi_device_interface_config_t max3421_cfg = { .mode = 0, - .clock_speed_hz = 26000000, + .clock_speed_hz = 20000000, // S2/S3 can work with 26 Mhz, but esp32 seems only work up to 20 Mhz .spics_io_num = -1, // manual control CS .queue_size = 1 }; ESP_ERROR_CHECK(spi_bus_add_device(MAX3421_SPI_HOST, &max3421_cfg, &max3421_spi)); - // debug - gpio_set_direction(13, GPIO_MODE_OUTPUT); - gpio_set_level(13, 0); - // Interrupt pin max3421_intr_sem = xSemaphoreCreateBinary(); xTaskCreate(max3421_intr_task, "max3421 intr", 2048, NULL, configMAX_PRIORITIES - 2, NULL); diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index abe276910..8bdb3802e 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -5,17 +5,7 @@ set(includes_public) set(compile_options) set(tusb_src "${CMAKE_CURRENT_SOURCE_DIR}/../../../../../src") -if(target STREQUAL "esp32s3") - set(tusb_mcu "OPT_MCU_ESP32S3") -elseif(target STREQUAL "esp32s2") - set(tusb_mcu "OPT_MCU_ESP32S2") -else() - # CONFIG_TINYUSB dependency has been guaranteed by Kconfig logic, - # So it's not possible that cmake goes here - message(FATAL_ERROR "TinyUSB is not support on ${target}.") - return() -endif() - +string(TOUPPER OPT_MCU_${target} tusb_mcu) list(APPEND compile_definitions CFG_TUSB_MCU=${tusb_mcu} CFG_TUSB_OS=OPT_OS_FREERTOS diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index 92a9bcb04..eb97401c3 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -3,11 +3,7 @@ cmake_minimum_required(VERSION 3.5) # Apply board specific content i.e IDF_TARGET must be set before project.cmake is included include("${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake") -if(IDF_TARGET STREQUAL "esp32s2") - set(FAMILY_MCUS ESP32S2) -elseif(IDF_TARGET STREQUAL "esp32s3") - set(FAMILY_MCUS ESP32S3) -endif() +string(TOUPPER ${IDF_TARGET} FAMILY_MCUS) # Add example src and bsp directories set(EXTRA_COMPONENT_DIRS "src" "${CMAKE_CURRENT_LIST_DIR}/boards" "${CMAKE_CURRENT_LIST_DIR}/components") diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0ae2573cd..2c4d7461d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -329,6 +329,9 @@ #define TUP_USBIP_DWC2 #define TUP_DCD_ENDPOINT_MAX 6 +#elif TU_CHECK_MCU(OPT_MCU_ESP32) && (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) + #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" + //--------------------------------------------------------------------+ // Dialog //--------------------------------------------------------------------+ @@ -426,7 +429,7 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#ifndef TUP_DCD_ENDPOINT_MAX +#if CFG_TUD_ENABLED && !defined(TUP_DCD_ENDPOINT_MAX) #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 39afb7505..053169bf2 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -484,8 +484,8 @@ bool hcd_init(uint8_t rhport) { // v1 is 0x01, v2 is 0x12, v3 is 0x13 uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); - TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); TU_LOG2_HEX(revision); + TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); // reset reg_write(rhport, USBCTL_ADDR, USBCTL_CHIPRES, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index cbcb69edd..25412d432 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -119,6 +119,8 @@ // Espressif #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 +#define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog #define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x -- cgit v1.3.1 From 223ce56625474764dc00229c44731858abcf4f29 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 26 Apr 2024 00:10:57 +0700 Subject: - add esp32 c3, c6 mcu option - skip breakpoint for espressif riscv --- examples/host/cdc_msc_hid_freertos/src/main.c | 5 ++++- src/common/tusb_mcu.h | 4 ++-- src/common/tusb_verify.h | 2 +- src/portable/analog/max3421/hcd_max3421.c | 2 ++ src/tusb_option.h | 2 ++ 5 files changed, 11 insertions(+), 4 deletions(-) (limited to 'examples/host') diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index a6cb4d460..fa799aede 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -126,7 +126,10 @@ static void usb_host_task(void *param) { (void) param; // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + if (!tuh_init(BOARD_TUH_RHPORT)) { + printf("Failed to init USB Host Stack\r\n"); + vTaskSuspend(NULL); + } if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 00526bdba..5a567f2d5 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -429,8 +429,8 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#if !defined(TUP_DCD_ENDPOINT_MAX) - #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" +#if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED +#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 71406dacf..0a9549c99 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -84,7 +84,7 @@ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -#elif defined(__riscv) +#elif defined(__riscv) && !TUP_MCU_ESPRESSIF #define TU_BREAKPOINT() do { __asm("ebreak\n"); } while(0) #elif defined(_mips) diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 053169bf2..4dc93d2d8 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -479,6 +479,8 @@ bool hcd_init(uint8_t rhport) { _hcd_data.spi_mutex = osal_mutex_create(&_hcd_data.spi_mutexdef); #endif + // NOTE: driver does not seem to work without nRST pin signal + // full duplex, interrupt negative edge reg_write(rhport, PINCTL_ADDR, _tuh_cfg.pinctl | PINCTL_FDUPSPI, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index 25412d432..3ead20ee7 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -120,6 +120,8 @@ #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 #define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define OPT_MCU_ESP32C3 903 ///< Espressif ESP32-C3 +#define OPT_MCU_ESP32C6 904 ///< Espressif ESP32-C6 #define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog -- cgit v1.3.1