From 94fed7db0e4c75caafaeff250c796ce1d9ab4c11 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 29 Apr 2020 11:31:04 +0700 Subject: fix esp32 ci adding FREERTOS STATIC to sdkconfig default --- examples/device/cdc_msc_freertos/sdkconfig.defaults | 1 + examples/device/hid_composite_freertos/sdkconfig.defaults | 1 + 2 files changed, 2 insertions(+) (limited to 'examples') diff --git a/examples/device/cdc_msc_freertos/sdkconfig.defaults b/examples/device/cdc_msc_freertos/sdkconfig.defaults index 23de48ebd..3253f605c 100644 --- a/examples/device/cdc_msc_freertos/sdkconfig.defaults +++ b/examples/device/cdc_msc_freertos/sdkconfig.defaults @@ -2,3 +2,4 @@ CONFIG_IDF_CMAKE=y CONFIG_IDF_TARGET="esp32s2" CONFIG_IDF_TARGET_ESP32S2=y CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y diff --git a/examples/device/hid_composite_freertos/sdkconfig.defaults b/examples/device/hid_composite_freertos/sdkconfig.defaults index 23de48ebd..3253f605c 100644 --- a/examples/device/hid_composite_freertos/sdkconfig.defaults +++ b/examples/device/hid_composite_freertos/sdkconfig.defaults @@ -2,3 +2,4 @@ CONFIG_IDF_CMAKE=y CONFIG_IDF_TARGET="esp32s2" CONFIG_IDF_TARGET_ESP32S2=y CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK=y +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y -- cgit v1.3.1 From 449b337467d15a2000d2484fa73e63605881376a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 29 Apr 2020 13:03:39 +0700 Subject: fix ci board test with esp32 --- examples/device/board_test/sdkconfig.defaults | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'examples') diff --git a/examples/device/board_test/sdkconfig.defaults b/examples/device/board_test/sdkconfig.defaults index 34991d70c..cede66031 100644 --- a/examples/device/board_test/sdkconfig.defaults +++ b/examples/device/board_test/sdkconfig.defaults @@ -1,4 +1,4 @@ CONFIG_IDF_CMAKE=y CONFIG_IDF_TARGET="esp32s2" CONFIG_IDF_TARGET_ESP32S2=y - +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y -- cgit v1.3.1 From e61bf415fe7980765c116a98d506546eb891b624 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 2 May 2020 18:35:46 +0700 Subject: minor update net example samg failed to run net example --- .../device/net_lwip_webserver/src/usb_descriptors.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) (limited to 'examples') diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 51af11e8b..d63816037 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -103,9 +103,21 @@ uint8_t const * tud_descriptor_device_cb(void) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_CDC 2 + #define EPNUM_NET_NOTIF 0x81 + #define EPNUM_NET_OUT 0x02 + #define EPNUM_NET_IN 0x82 + +#elif CFG_TUSB_MCU == OPT_MCU_SAMG + // SAMG doesn't support a same endpoint number with different direction IN and OUT + // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_NET_NOTIF 0x81 + #define EPNUM_NET_OUT 0x02 + #define EPNUM_NET_IN 0x83 + #else - #define EPNUM_CDC 2 + #define EPNUM_NET_NOTIF 0x81 + #define EPNUM_NET_OUT 0x02 + #define EPNUM_NET_IN 0x82 #endif static uint8_t const rndis_configuration[] = @@ -114,7 +126,7 @@ static uint8_t const rndis_configuration[] = TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS+1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, CFG_TUD_NET_ENDPOINT_SIZE), + TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), }; static uint8_t const ecm_configuration[] = @@ -123,7 +135,7 @@ static uint8_t const ecm_configuration[] = TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM+1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, 0x81, 64, EPNUM_CDC, 0x80 | EPNUM_CDC, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; // Configuration array: RNDIS and CDC-ECM -- cgit v1.3.1 From 1a8ce043ed937012454e5b79396455f9c5568a68 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 17 May 2020 14:24:15 +0700 Subject: enable -Wcast-align suppress vendor sdk driver at board.mk --- examples/make.mk | 8 +++----- hw/bsp/adafruit_clue/board.mk | 4 ++-- hw/bsp/arduino_nano33_ble/board.mk | 4 ++-- hw/bsp/circuitplayground_bluefruit/board.mk | 4 ++-- hw/bsp/feather_nrf52840_express/board.mk | 4 ++-- hw/bsp/feather_nrf52840_sense/board.mk | 4 ++-- hw/bsp/feather_stm32f405/board.mk | 3 +++ hw/bsp/nrf52840_mdk_dongle/board.mk | 4 ++-- hw/bsp/nutiny_sdk_nuc505/board.mk | 5 +++-- hw/bsp/pca10056/board.mk | 4 ++-- hw/bsp/pca10059/board.mk | 4 ++-- hw/bsp/pca10100/board.mk | 4 ++-- hw/bsp/raytac_mdbt50q_rx/board.mk | 4 ++-- hw/bsp/stm32f070rbnucleo/board.mk | 4 ++-- hw/bsp/stm32f072disco/board.mk | 4 ++-- hw/bsp/stm32f407disco/board.mk | 3 +++ hw/bsp/stm32f411disco/board.mk | 3 +++ hw/bsp/stm32f412disco/board.mk | 4 ++-- hw/bsp/stm32f746nucleo/board.mk | 4 ++-- hw/bsp/stm32f767nucleo/board.mk | 4 ++-- hw/bsp/stm32h743nucleo/board.mk | 1 - src/common/tusb_common.h | 2 +- src/portable/nxp/transdimension/dcd_transdimension.c | 6 ++++-- 23 files changed, 50 insertions(+), 41 deletions(-) (limited to 'examples') diff --git a/examples/make.mk b/examples/make.mk index 449dc899d..2ea50753b 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -63,11 +63,9 @@ CFLAGS += \ -Wwrite-strings \ -Wsign-compare \ -Wmissing-format-attribute \ - -Wunreachable-code - -# This causes lots of warning with nrf5x build due to nrfx code -# CFLAGS += -Wcast-align - + -Wunreachable-code \ + -Wcast-align + # Debugging/Optimization ifeq ($(DEBUG), 1) CFLAGS += -Og -ggdb diff --git a/hw/bsp/adafruit_clue/board.mk b/hw/bsp/adafruit_clue/board.mk index be8c5bf56..5290455cc 100644 --- a/hw/bsp/adafruit_clue/board.mk +++ b/hw/bsp/adafruit_clue/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DNRF52840_XXAA \ -DCONFIG_GPIO_AS_PINRESET -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/arduino_nano33_ble/board.mk b/hw/bsp/arduino_nano33_ble/board.mk index d217d37c0..0a25d0b19 100644 --- a/hw/bsp/arduino_nano33_ble/board.mk +++ b/hw/bsp/arduino_nano33_ble/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DNRF52840_XXAA \ -DCONFIG_GPIO_AS_PINRESET -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/circuitplayground_bluefruit/board.mk b/hw/bsp/circuitplayground_bluefruit/board.mk index be8c5bf56..5290455cc 100644 --- a/hw/bsp/circuitplayground_bluefruit/board.mk +++ b/hw/bsp/circuitplayground_bluefruit/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DNRF52840_XXAA \ -DCONFIG_GPIO_AS_PINRESET -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/feather_nrf52840_express/board.mk b/hw/bsp/feather_nrf52840_express/board.mk index 9f38d6796..7b2625cd4 100644 --- a/hw/bsp/feather_nrf52840_express/board.mk +++ b/hw/bsp/feather_nrf52840_express/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DNRF52840_XXAA \ -DCONFIG_GPIO_AS_PINRESET -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/feather_nrf52840_sense/board.mk b/hw/bsp/feather_nrf52840_sense/board.mk index be8c5bf56..5290455cc 100644 --- a/hw/bsp/feather_nrf52840_sense/board.mk +++ b/hw/bsp/feather_nrf52840_sense/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DNRF52840_XXAA \ -DCONFIG_GPIO_AS_PINRESET -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/feather_stm32f405/board.mk b/hw/bsp/feather_stm32f405/board.mk index 2d1f8bb8d..8233c6608 100644 --- a/hw/bsp/feather_stm32f405/board.mk +++ b/hw/bsp/feather_stm32f405/board.mk @@ -9,6 +9,9 @@ CFLAGS += \ -DSTM32F405xx \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align + ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx diff --git a/hw/bsp/nrf52840_mdk_dongle/board.mk b/hw/bsp/nrf52840_mdk_dongle/board.mk index 0ab5ff2e1..9ba04ba1f 100644 --- a/hw/bsp/nrf52840_mdk_dongle/board.mk +++ b/hw/bsp/nrf52840_mdk_dongle/board.mk @@ -8,8 +8,8 @@ CFLAGS += \ -DNRF52840_XXAA \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/nutiny_sdk_nuc505/board.mk b/hw/bsp/nutiny_sdk_nuc505/board.mk index 39df77d2c..874d4ae42 100644 --- a/hw/bsp/nutiny_sdk_nuc505/board.mk +++ b/hw/bsp/nutiny_sdk_nuc505/board.mk @@ -7,6 +7,9 @@ CFLAGS += \ -mfpu=fpv4-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_NUC505 +# TODO this cast-align is caused by dcd_nuc505 should be fixed +CFLAGS += -Wno-error=cast-align + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc505_flashtoram.ld @@ -19,13 +22,11 @@ SRC_C += \ hw/mcu/nuvoton/nuc505/StdDriver/src/i2s.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/pwm.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/rtc.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/sd.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/spi.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/spim.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/sys.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/timer.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/uart.c \ - hw/mcu/nuvoton/nuc505/StdDriver/src/usbd.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/wdt.c \ hw/mcu/nuvoton/nuc505/StdDriver/src/wwdt.c diff --git a/hw/bsp/pca10056/board.mk b/hw/bsp/pca10056/board.mk index b2f119626..0971e64c8 100644 --- a/hw/bsp/pca10056/board.mk +++ b/hw/bsp/pca10056/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DCONFIG_GPIO_AS_PINRESET \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/pca10059/board.mk b/hw/bsp/pca10059/board.mk index 8cce65eb9..72dfefdcb 100644 --- a/hw/bsp/pca10059/board.mk +++ b/hw/bsp/pca10059/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DCONFIG_GPIO_AS_PINRESET \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/pca10100/board.mk b/hw/bsp/pca10100/board.mk index 0ec8f0f69..5231aaf63 100644 --- a/hw/bsp/pca10100/board.mk +++ b/hw/bsp/pca10100/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DCONFIG_GPIO_AS_PINRESET \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/raytac_mdbt50q_rx/board.mk b/hw/bsp/raytac_mdbt50q_rx/board.mk index 0960ffe55..47bb430fc 100644 --- a/hw/bsp/raytac_mdbt50q_rx/board.mk +++ b/hw/bsp/raytac_mdbt50q_rx/board.mk @@ -8,8 +8,8 @@ CFLAGS += \ -DNRF52840_XXAA \ -DCFG_TUSB_MCU=OPT_MCU_NRF5X -# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align # due to tusb_hal_nrf_power_event GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) diff --git a/hw/bsp/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f070rbnucleo/board.mk index 8a073d524..8ae75dd96 100644 --- a/hw/bsp/stm32f070rbnucleo/board.mk +++ b/hw/bsp/stm32f070rbnucleo/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DCFG_EXAMPLE_MSC_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_STM32F0 -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F0xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F0xx diff --git a/hw/bsp/stm32f072disco/board.mk b/hw/bsp/stm32f072disco/board.mk index 522459d61..e6787b266 100644 --- a/hw/bsp/stm32f072disco/board.mk +++ b/hw/bsp/stm32f072disco/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DCFG_EXAMPLE_MSC_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_STM32F0 -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F0xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F0xx diff --git a/hw/bsp/stm32f407disco/board.mk b/hw/bsp/stm32f407disco/board.mk index 92e021538..df2ee4ba5 100644 --- a/hw/bsp/stm32f407disco/board.mk +++ b/hw/bsp/stm32f407disco/board.mk @@ -9,6 +9,9 @@ CFLAGS += \ -DSTM32F407xx \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align + ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx diff --git a/hw/bsp/stm32f411disco/board.mk b/hw/bsp/stm32f411disco/board.mk index a5ea8cab2..5e0d6c3a0 100644 --- a/hw/bsp/stm32f411disco/board.mk +++ b/hw/bsp/stm32f411disco/board.mk @@ -9,6 +9,9 @@ CFLAGS += \ -DSTM32F411xE \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align + ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx diff --git a/hw/bsp/stm32f412disco/board.mk b/hw/bsp/stm32f412disco/board.mk index 2a3ecbddd..5cf5e9b7a 100644 --- a/hw/bsp/stm32f412disco/board.mk +++ b/hw/bsp/stm32f412disco/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DSTM32F412Zx \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 -# mcu driver cause following warnings -CFLAGS += -Wno-error=maybe-uninitialized +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx diff --git a/hw/bsp/stm32f746nucleo/board.mk b/hw/bsp/stm32f746nucleo/board.mk index 7e070c1c5..95445486a 100644 --- a/hw/bsp/stm32f746nucleo/board.mk +++ b/hw/bsp/stm32f746nucleo/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DSTM32F746xx \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 -# mcu driver cause following warnings -CFLAGS += -Wno-error=shadow +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align -Wno-error=shadow ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F7xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F7xx diff --git a/hw/bsp/stm32f767nucleo/board.mk b/hw/bsp/stm32f767nucleo/board.mk index e5f0736df..fc638ddcb 100644 --- a/hw/bsp/stm32f767nucleo/board.mk +++ b/hw/bsp/stm32f767nucleo/board.mk @@ -9,8 +9,8 @@ CFLAGS += \ -DSTM32F767xx \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 -# mcu driver cause following warnings -CFLAGS += -Wno-error=shadow +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align -Wno-error=shadow ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F7xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F7xx diff --git a/hw/bsp/stm32h743nucleo/board.mk b/hw/bsp/stm32h743nucleo/board.mk index 94cc44b5f..30e52dfcc 100644 --- a/hw/bsp/stm32h743nucleo/board.mk +++ b/hw/bsp/stm32h743nucleo/board.mk @@ -10,7 +10,6 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32H7 # mcu driver cause following warnings -CFLAGS += -Wno-error=maybe-uninitialized ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32H7xx_HAL_Driver ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32H7xx diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 2389bfcd4..f144cda73 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -106,7 +106,7 @@ static inline uint16_t tu_max16 (uint16_t x, uint16_t y) { return (x > y) ? x : static inline uint32_t tu_max32 (uint32_t x, uint32_t y) { return (x > y) ? x : y; } // Align -static inline uint32_t tu_align_n(uint32_t value, uint32_t alignment) +static inline uint32_t tu_align(uint32_t value, uint32_t alignment) { return value & ((uint32_t) ~(alignment-1)); } diff --git a/src/portable/nxp/transdimension/dcd_transdimension.c b/src/portable/nxp/transdimension/dcd_transdimension.c index fcedc1c0c..7baf43e23 100644 --- a/src/portable/nxp/transdimension/dcd_transdimension.c +++ b/src/portable/nxp/transdimension/dcd_transdimension.c @@ -273,7 +273,8 @@ typedef struct { dcd_qtd_t qtd[QHD_MAX] TU_ATTR_ALIGNED(32); // for portability, TinyUSB only queue 1 TD for each Qhd }dcd_data_t; -static dcd_data_t _dcd_data CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048); +CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048) +static dcd_data_t _dcd_data; //--------------------------------------------------------------------+ // CONTROLLER API @@ -478,7 +479,8 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t // Force the CPU to flush the buffer. We increase the size by 32 because the call aligns the // address to 32-byte boundaries. - CleanInvalidateDCache_by_Addr((uint32_t*) buffer, total_bytes + 31); + // void* cast to suppress cast-align warning, buffer must be + CleanInvalidateDCache_by_Addr((uint32_t*) tu_align((uint32_t) buffer, 4), total_bytes + 31); //------------- Prepare qtd -------------// qtd_init(p_qtd, buffer, total_bytes); -- cgit v1.3.1 From a7db945cff33522062818d3c4a68296b7ddccf9a Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 17 May 2020 15:34:14 +0700 Subject: temporariyly suppress cast-align warning for net_device and net example --- examples/device/net_lwip_webserver/Makefile | 3 +++ 1 file changed, 3 insertions(+) (limited to 'examples') diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index fa93cf87f..5279c49e2 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -6,6 +6,9 @@ CFLAGS += \ -DTCP_WND=2*TCP_MSS \ -DHTTPD_USE_CUSTOM_FSDATA=0 +# TODO rndis_reports.c and net_device cause cast algin warnings +CFLAGS += -Wno-error=cast-align + INC += \ src \ $(TOP)/hw \ -- cgit v1.3.1 From 81b1f97ef7510a12a2d2ee3e8c806d4824e8a720 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 18 May 2020 13:23:40 +0700 Subject: suppress cast-align warnings for net device driver --- examples/device/net_lwip_webserver/Makefile | 3 --- lib/networking/rndis_reports.c | 10 +++++----- src/class/net/net_device.c | 6 +++--- 3 files changed, 8 insertions(+), 11 deletions(-) (limited to 'examples') diff --git a/examples/device/net_lwip_webserver/Makefile b/examples/device/net_lwip_webserver/Makefile index 5279c49e2..fa93cf87f 100644 --- a/examples/device/net_lwip_webserver/Makefile +++ b/examples/device/net_lwip_webserver/Makefile @@ -6,9 +6,6 @@ CFLAGS += \ -DTCP_WND=2*TCP_MSS \ -DHTTPD_USE_CUSTOM_FSDATA=0 -# TODO rndis_reports.c and net_device cause cast algin warnings -CFLAGS += -Wno-error=cast-align - INC += \ src \ $(TOP)/hw \ diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index 6e24c57e9..ee611c883 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -74,7 +74,7 @@ static const uint32_t OIDSupportedList[] = #define OID_LIST_LENGTH TU_ARRAY_SIZE(OIDSupportedList) #define ENC_BUF_SIZE (OID_LIST_LENGTH * 4 + 32) -static uint8_t *encapsulated_buffer; +static void *encapsulated_buffer; static void rndis_report(void) { @@ -152,7 +152,7 @@ static void rndis_query(void) } } -#define INFBUF ((uint32_t *)((uint8_t *)&(m->RequestId) + m->InformationBufferOffset)) +#define INFBUF ((uint8_t *)&(m->RequestId) + m->InformationBufferOffset) static void rndis_handle_config_parm(const char *data, int keyoffset, int valoffset, int keylen, int vallen) { @@ -191,14 +191,14 @@ static void rndis_handle_set_msg(void) char *ptr = (char *)m; ptr += sizeof(rndis_generic_msg_t); ptr += m->InformationBufferOffset; - p = (rndis_config_parameter_t *)ptr; + p = (rndis_config_parameter_t *) ((void*) ptr); rndis_handle_config_parm(ptr, p->ParameterNameOffset, p->ParameterValueOffset, p->ParameterNameLength, p->ParameterValueLength); } break; /* Mandatory general OIDs */ case OID_GEN_CURRENT_PACKET_FILTER: - oid_packet_filter = *INFBUF; + memcpy(&oid_packet_filter, INFBUF, 4); if (oid_packet_filter) { rndis_packetFilter(oid_packet_filter); @@ -239,7 +239,7 @@ void rndis_class_set_handler(uint8_t *data, int size) encapsulated_buffer = data; (void)size; - switch (((rndis_generic_msg_t *)data)->MessageType) + switch (((rndis_generic_msg_t *)encapsulated_buffer)->MessageType) { case REMOTE_NDIS_INITIALIZE_MSG: { diff --git a/src/class/net/net_device.c b/src/class/net/net_device.c index fedd4db99..cbd662b10 100644 --- a/src/class/net/net_device.c +++ b/src/class/net/net_device.c @@ -326,7 +326,7 @@ bool netd_control_request(uint8_t rhport, tusb_control_request_t const * request { if (request->bmRequestType_bit.direction == TUSB_DIR_IN) { - rndis_generic_msg_t *rndis_msg = (rndis_generic_msg_t *)notify.rndis_buf; + rndis_generic_msg_t *rndis_msg = (rndis_generic_msg_t *) ((void*) notify.rndis_buf); uint32_t msglen = tu_le32toh(rndis_msg->MessageLength); TU_ASSERT(msglen <= sizeof(notify.rndis_buf)); tud_control_xfer(rhport, request, notify.rndis_buf, msglen); @@ -356,7 +356,7 @@ static void handle_incoming_packet(uint32_t len) } else { - rndis_data_packet_t *r = (rndis_data_packet_t *)pnt; + rndis_data_packet_t *r = (rndis_data_packet_t *) ((void*) pnt); if (len >= sizeof(rndis_data_packet_t)) if ( (r->MessageType == REMOTE_NDIS_PACKET_MSG) && (r->MessageLength <= len)) if ( (r->DataOffset + offsetof(rndis_data_packet_t, DataOffset) + r->DataLength) <= len) @@ -450,7 +450,7 @@ void tud_network_xmit(struct pbuf *p) if (!_netd_itf.ecm_mode) { - rndis_data_packet_t *hdr = (rndis_data_packet_t *)transmitted; + rndis_data_packet_t *hdr = (rndis_data_packet_t *) ((void*) transmitted); memset(hdr, 0, sizeof(rndis_data_packet_t)); hdr->MessageType = REMOTE_NDIS_PACKET_MSG; hdr->MessageLength = len; -- cgit v1.3.1 From ff9994116e932170acd117db7732863d95a348f6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 21 May 2020 21:22:12 +0700 Subject: fix nrf hanged (blocking wait) when called within critical section --- examples/device/cdc_msc/ses/nrf5x/nrf5x.emProject | 29 ++++++---- src/portable/nordic/nrf5x/dcd_nrf5x.c | 68 +++++++++++++++++++---- 2 files changed, 73 insertions(+), 24 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc/ses/nrf5x/nrf5x.emProject b/examples/device/cdc_msc/ses/nrf5x/nrf5x.emProject index fa5534635..f7714f269 100644 --- a/examples/device/cdc_msc/ses/nrf5x/nrf5x.emProject +++ b/examples/device/cdc_msc/ses/nrf5x/nrf5x.emProject @@ -19,8 +19,9 @@ arm_target_device_name="nRF52840_xxAA" arm_target_interface_type="SWD" build_treat_warnings_as_errors="Yes" - c_preprocessor_definitions="NRF52840_XXAA;__nRF_FAMILY;ARM_MATH_CM4;FLASH_PLACEMENT=1;CFG_TUSB_MCU=OPT_MCU_NRF5X" - c_user_include_directories="../../src;$(rootDir)/hw/mcu/nordic/cmsis/Include;$(rootDir)/hw;$(rootDir)/src;$(nrfxDir)/..;$(nrfxDir);$(nrfxDir)/mdk;$(nrfxDir)/hal;$(nrfxDir)/drivers/include;$(nrfxDir)/drivers/src" + c_additional_options="-Wno-error=undef;-Wno-error=unused-parameter;-Wno-error=cast-align;-Wno-error=cast-function-type" + c_preprocessor_definitions="NRF52840_XXAA;__nRF_FAMILY;ARM_MATH_CM4;FLASH_PLACEMENT=1;CFG_TUSB_MCU=OPT_MCU_NRF5X;CFG_TUSB_DEBUG=1" + c_user_include_directories="../../src;$(rootDir)/lib/CMSIS_4/CMSIS/Include;$(rootDir)/hw;$(rootDir)/src;$(nrfxDir)/..;$(nrfxDir);$(nrfxDir)/mdk;$(nrfxDir)/hal;$(nrfxDir)/drivers/include;$(nrfxDir)/drivers/src" debug_register_definition_file="nrf52840_Registers.xml" debug_target_connection="J-Link" gcc_enable_all_warnings="Yes" @@ -42,11 +43,12 @@ recurse="Yes" /> - - - + + + + @@ -103,16 +105,10 @@ - + + + + + + + + + diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index d788547b8..7ca32c4f6 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -51,6 +51,11 @@ enum USBD_INTENCLR_ENDISOIN_Msk | USBD_INTEN_ENDISOOUT_Msk }; +enum +{ + EP_COUNT = 8 +}; + // Transfer descriptor typedef struct { @@ -69,36 +74,73 @@ typedef struct static struct { // All 8 endpoints including control IN & OUT (offset 1) - xfer_td_t xfer[8][2]; + xfer_td_t xfer[EP_COUNT][2]; - // Only one DMA can run at a time - volatile bool dma_running; + // Number of pending DMA that is started but not handled yet by dcd_int_handler(). + // Since nRF can only carry one DMA can run at a time, this value is normally be either 0 or 1. + // However, in critical section with interrupt disabled, the DMA can be finished and added up + // until handled by dcd_init_handler() when exiting critical section. + volatile uint8_t dma_pending; }_dcd; /*------------------------------------------------------------------*/ /* Control / Bulk / Interrupt (CBI) Transfer *------------------------------------------------------------------*/ +// NVIC_GetEnableIRQ is only available in CMSIS v5 +#ifndef NVIC_GetEnableIRQ +static inline uint32_t NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif + // helper to start DMA static void edpt_dma_start(volatile uint32_t* reg_startep) { // Only one dma can be active - if ( _dcd.dma_running ) + if ( _dcd.dma_pending ) { if (SCB->ICSR & SCB_ICSR_VECTACTIVE_Msk) { - // If called within ISR, use usbd task to defer later + // Called within ISR, use usbd task to defer later usbd_defer_func( (osal_task_func_t) edpt_dma_start, (void*) reg_startep, true ); return; } else { - // Otherwise simply block wait - while ( _dcd.dma_running ) { } + if ( __get_PRIMASK() || !NVIC_GetEnableIRQ(USBD_IRQn) ) + { + // Called in critical section with interrupt disabled. We have to manually check + // for the DMA complete by comparing current pending DMA with number of ENDED Events + uint32_t ended = 0; + + while ( _dcd.dma_pending < ((uint8_t) ended) ) + { + ended = NRF_USBD->EVENTS_ENDISOIN + NRF_USBD->EVENTS_ENDISOOUT; + + for (uint8_t i=0; iEVENTS_ENDEPIN[i] + NRF_USBD->EVENTS_ENDEPOUT[i]; + } + } + }else + { + // Called in non-critical thread-mode, should be 99% of the time. + // Should be safe to blocking wait until previous DMA transfer complete + while ( _dcd.dma_pending ) { } + } } } - _dcd.dma_running = true; + _dcd.dma_pending++; (*reg_startep) = 1; __ISB(); __DSB(); @@ -107,8 +149,8 @@ static void edpt_dma_start(volatile uint32_t* reg_startep) // DMA is complete static void edpt_dma_end(void) { - TU_ASSERT(_dcd.dma_running, ); - _dcd.dma_running = false; + TU_ASSERT(_dcd.dma_pending, ); + _dcd.dma_pending = 0; } // helper getting td @@ -282,9 +324,11 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t if ( control_status ) { - // Status Phase also require Easy DMA has to be free as well !!!! + // Status Phase also requires Easy DMA has to be available as well !!!! + // However TASKS_EP0STATUS doesn't trigger any DMA transfer and got ENDED event subsequently + // Therefore dma_running state will be corrected right away edpt_dma_start(&NRF_USBD->TASKS_EP0STATUS); - edpt_dma_end(); + if (_dcd.dma_pending) _dcd.dma_pending--; // correct the dma_running++ in dma start // The nRF doesn't interrupt on status transmit so we queue up a success response. dcd_event_xfer_complete(0, ep_addr, 0, XFER_RESULT_SUCCESS, false); -- cgit v1.3.1 From fad088719e7cc4d1cab9216eb81567dd67af65f7 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 May 2020 15:21:23 +0700 Subject: merge CFG_TUSB_RHPORT1_MODE into CFG_TUSB_RHPORT0_MODE each port is 1 byte for easy maintenance --- examples/device/cdc_msc/src/tusb_config.h | 25 +++++++++++----- hw/bsp/ea4357/ea4357.c | 8 ++--- hw/bsp/mcb1800/mcb1800.c | 8 ++--- hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c | 4 +-- hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c | 4 +-- hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c | 4 +-- hw/bsp/ngx4330/ngx4330.c | 8 ++--- hw/bsp/teensy_40/teensy40.c | 4 +-- src/tusb_option.h | 50 +++++++++++++++++-------------- 9 files changed, 66 insertions(+), 49 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 09e98b247..9beb9f6a2 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -34,19 +34,30 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) -#else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 #endif -#define CFG_TUSB_OS OPT_OS_NONE +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#define CFG_TUSB_RHPORT0_MODE ((OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) << (8*BOARD_DEVICE_RHPORT_NUM)) +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index b7e7f7a5c..04c4e60a6 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -149,7 +149,7 @@ void board_init(void) * status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down * resistors are always active */ -#if CFG_TUSB_RHPORT0_MODE +#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE | OPT_MODE_HOST) Chip_USB0_Init(); // // Reset controller @@ -185,7 +185,7 @@ void board_init(void) * of VBUS can be read via U31. * JP16 shall not be inserted. */ -#if CFG_TUSB_RHPORT1_MODE +#if CFG_TUSB_RHPORT0_MODE & ((OPT_MODE_DEVICE | OPT_MODE_HOST) << 8) Chip_USB1_Init(); // // Reset controller @@ -232,11 +232,11 @@ void USB0_IRQHandler(void) void USB1_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8) tuh_isr(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8) tud_int_handler(1); #endif } diff --git a/hw/bsp/mcb1800/mcb1800.c b/hw/bsp/mcb1800/mcb1800.c index ae9f1b62f..6387f983e 100644 --- a/hw/bsp/mcb1800/mcb1800.c +++ b/hw/bsp/mcb1800/mcb1800.c @@ -43,11 +43,11 @@ void USB0_IRQHandler(void) void USB1_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8) tuh_isr(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8) tud_int_handler(1); #endif } @@ -163,7 +163,7 @@ void board_init(void) }; // USB0 -#if CFG_TUSB_RHPORT0_MODE +#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE | OPT_MODE_HOST) Chip_USB0_Init(); // // Reset controller @@ -180,7 +180,7 @@ void board_init(void) #endif // USB1 -#if CFG_TUSB_RHPORT1_MODE +#if CFG_TUSB_RHPORT0_MODE & ((OPT_MODE_DEVICE | OPT_MODE_HOST) << 8) Chip_USB1_Init(); // // Reset controller diff --git a/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c b/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c index be0ae3ea8..8dae7a0c2 100644 --- a/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c +++ b/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c @@ -134,11 +134,11 @@ void USB_OTG1_IRQHandler(void) void USB_OTG2_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8) tuh_isr(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8) tud_int_handler(1); #endif } diff --git a/hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c b/hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c index be0ae3ea8..8dae7a0c2 100644 --- a/hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c +++ b/hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c @@ -134,11 +134,11 @@ void USB_OTG1_IRQHandler(void) void USB_OTG2_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8) tuh_isr(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8) tud_int_handler(1); #endif } diff --git a/hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c b/hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c index be0ae3ea8..8dae7a0c2 100644 --- a/hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c +++ b/hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c @@ -134,11 +134,11 @@ void USB_OTG1_IRQHandler(void) void USB_OTG2_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8) tuh_isr(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8) tud_int_handler(1); #endif } diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index 5296ddcb3..85d11d6ad 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -161,7 +161,7 @@ void board_init(void) * status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down * resistors are always active */ -#if CFG_TUSB_RHPORT0_MODE +#if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE | OPT_MODE_HOST) Chip_USB0_Init(); // // Reset controller @@ -197,7 +197,7 @@ void board_init(void) * of VBUS can be read via U31. * JP16 shall not be inserted. */ -#if CFG_TUSB_RHPORT1_MODE +#if CFG_TUSB_RHPORT0_MODE & ((OPT_MODE_DEVICE | OPT_MODE_HOST) << 8) Chip_USB1_Init(); // // Reset controller @@ -235,11 +235,11 @@ void USB0_IRQHandler(void) void USB1_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8) tuh_isr(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8) tud_int_handler(1); #endif } diff --git a/hw/bsp/teensy_40/teensy40.c b/hw/bsp/teensy_40/teensy40.c index f45a98ef3..0ca86f602 100644 --- a/hw/bsp/teensy_40/teensy40.c +++ b/hw/bsp/teensy_40/teensy40.c @@ -135,11 +135,11 @@ void USB_OTG1_IRQHandler(void) void USB_OTG2_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8) tuh_isr(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8) tud_int_handler(1); #endif } diff --git a/src/tusb_option.h b/src/tusb_option.h index 9e6a2b532..472656424 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -114,44 +114,50 @@ /** \addtogroup group_configuration * @{ */ + //-------------------------------------------------------------------- -// CONTROLLER -// Only 1 roothub port can be configured to be device and/or host. -// tinyusb does not support dual devices or dual host configuration +// RootHub Mode Configuration +// +// Each byte of the CFG_TUSB_RHPORTx_MODE contains operation mode for +// a roothub port (device or host). Therefore each macro can have up to +// 4 ports. //-------------------------------------------------------------------- -/** \defgroup group_mode Controller Mode Selection - * \brief CFG_TUSB_CONTROLLER_N_MODE must be defined with these - * @{ */ + +// Lower 4-bit is operational mode #define OPT_MODE_NONE 0x00 ///< Disabled #define OPT_MODE_DEVICE 0x01 ///< Device Mode #define OPT_MODE_HOST 0x02 ///< Host Mode -#define OPT_MODE_HIGH_SPEED 0x10 ///< High speed -/** @} */ + +// Higher 4-bit is max operational speed (corresponding to tusb_speed_t) +#define OPT_MODE_FULL_SPEED 0x00 ///< Max Full Speed +#define OPT_MODE_LOW_SPEED 0x10 ///< Max Low Speed +#define OPT_MODE_HIGH_SPEED 0x20 ///< Max High Speed + #ifndef CFG_TUSB_RHPORT0_MODE #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE #endif -#ifndef CFG_TUSB_RHPORT1_MODE - #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE -#endif +//#ifndef CFG_TUSB_RHPORT1_MODE +// #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE +//#endif -#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST)) || \ - ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE)) - #error "tinyusb does not support same modes on more than 1 roothub port" +#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST ) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)) ) || \ + ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)) ) + #error "TinyUSB currently does not support same modes on more than 1 roothub port" #endif // Which roothub port is configured as host -#define TUH_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) ? 1 : -1) ) +#define TUH_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)) ? 1 : -1) ) #define TUSB_OPT_HOST_ENABLED ( TUH_OPT_RHPORT >= 0 ) // Which roothub port is configured as device -#define TUD_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) ? 1 : -1) ) +#define TUD_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)) ? 1 : -1) ) #if TUD_OPT_RHPORT == 0 -#define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED ) + #define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED ) #else -#define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT1_MODE & OPT_MODE_HIGH_SPEED ) + #define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HIGH_SPEED << 8) ) #endif #define TUSB_OPT_DEVICE_ENABLED ( TUD_OPT_RHPORT >= 0 ) @@ -168,15 +174,15 @@ // place data in accessible RAM for usb controller #ifndef CFG_TUSB_MEM_SECTION -#define CFG_TUSB_MEM_SECTION + #define CFG_TUSB_MEM_SECTION #endif #ifndef CFG_TUSB_MEM_ALIGN -#define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4) + #define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4) #endif #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE + #define CFG_TUSB_OS OPT_OS_NONE #endif //-------------------------------------------------------------------- @@ -184,7 +190,7 @@ //-------------------------------------------------------------------- #ifndef CFG_TUD_ENDPOINT0_SIZE - #define CFG_TUD_ENDPOINT0_SIZE 64 + #define CFG_TUD_ENDPOINT0_SIZE 64 #endif #ifndef CFG_TUD_CDC -- cgit v1.3.1 From e0490ae7866e8553b261e298719f7805fcac6875 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 29 May 2020 13:06:33 +0700 Subject: fix idf usb pin init changes --- examples/device/cdc_msc_freertos/src/tusb_config.h | 6 ++++-- hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c | 9 +++++++++ 2 files changed, 13 insertions(+), 2 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 794e996b6..40b7bced0 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -48,8 +48,10 @@ #define CFG_TUSB_OS OPT_OS_FREERTOS -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 +// can be defined by compiler in DEBUG build +#ifndef CFG_TUSB_DEBUG + #define CFG_TUSB_DEBUG 0 +#endif /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put diff --git a/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c b/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c index ef70f1ee2..bbcdab6d2 100644 --- a/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c +++ b/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c @@ -26,7 +26,9 @@ #include "../board.h" #include "driver/gpio.h" +#include "driver/periph_ctrl.h" #include "hal/usb_hal.h" +#include "soc/usb_periph.h" #include "driver/rmt.h" #include "led_strip/include/led_strip.h" @@ -66,10 +68,17 @@ void board_init(void) gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); // USB Controller Hal init + periph_module_reset(PERIPH_USB_MODULE); + periph_module_enable(PERIPH_USB_MODULE); + usb_hal_context_t hal = { .use_external_phy = false // use built-in PHY }; usb_hal_init(&hal); + + // Pin drive strength + gpio_set_drive_capability(USBPHY_DM_NUM, GPIO_DRIVE_CAP_3); + gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); } // Turn LED on or off -- cgit v1.3.1 From 710c54f8cbee2134334262cf872f538909b264c5 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 1 Jun 2020 01:36:09 +0700 Subject: allow hs ep open with 512 bytes --- examples/device/cdc_msc/src/usb_descriptors.c | 2 +- src/portable/st/synopsys/dcd_synopsys.c | 30 ++++++++++++++++++--------- 2 files changed, 21 insertions(+), 11 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 7b22d46a7..62ab4f10f 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -123,7 +123,7 @@ uint8_t const desc_configuration[] = TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; diff --git a/src/portable/st/synopsys/dcd_synopsys.c b/src/portable/st/synopsys/dcd_synopsys.c index ed16308da..739361da9 100644 --- a/src/portable/st/synopsys/dcd_synopsys.c +++ b/src/portable/st/synopsys/dcd_synopsys.c @@ -185,8 +185,9 @@ static void bus_reset(uint8_t rhport) // * 16 for largest packet size of 64 bytes. ( TODO Highspeed is 512 bytes) // * 1 location for global NAK (not required/used here). // * It is recommended to allocate 2 times the largest packet size, therefore - // Recommended value = 10 + 1 + 2 x (16+2) = 47 --> Let's make it 52 - usb_otg->GRXFSIZ = 52; + // Recommended value = 10 + 1 + 2 x (16+2) = 47. To make it scale better with large FIFO size + // and work better with Highspeed. We use 1/5 of total FIFO size + usb_otg->GRXFSIZ = (EP_FIFO_SIZE/4)/5; // Control IN uses FIFO 0 with 64 bytes ( 16 32-bit word ) usb_otg->DIEPTXF0_HNPTXFSIZ = (16 << USB_OTG_TX0FD_Pos) | (usb_otg->GRXFSIZ & 0x0000ffffUL); @@ -201,11 +202,11 @@ static void bus_reset(uint8_t rhport) } // speed is native DCD speed -static void set_turnaround(USB_OTG_GlobalTypeDef * usb_otg, uint32_t speed) +static void set_turnaround(USB_OTG_GlobalTypeDef * usb_otg, tusb_speed_t speed) { usb_otg->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; - if ( speed == DCD_HIGH_SPEED ) + if ( speed == TUSB_SPEED_HIGH ) { // Use fixed 0x09 for Highspeed usb_otg->GUSBCFG |= (0x09 << USB_OTG_GUSBCFG_TRDT_Pos); @@ -217,6 +218,12 @@ static void set_turnaround(USB_OTG_GlobalTypeDef * usb_otg, uint32_t speed) } } +static tusb_speed_t get_speed(USB_OTG_DeviceTypeDef* dev) +{ + uint32_t const enum_spd = (dev->DSTS & USB_OTG_DSTS_ENUMSPD_Msk) >> USB_OTG_DSTS_ENUMSPD_Pos; + return (enum_spd == DCD_HIGH_SPEED) ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL; +} + /*------------------------------------------------------------------*/ /* Controller API @@ -242,12 +249,12 @@ void dcd_init (uint8_t rhport) usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL | USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); - set_turnaround(usb_otg, DCD_HIGH_SPEED); + set_turnaround(usb_otg, TUSB_SPEED_HIGH); } else #endif { - set_turnaround(usb_otg, DCD_FULL_SPEED); + set_turnaround(usb_otg, TUSB_SPEED_FULL); // Enable internal PHY usb_otg->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; @@ -357,9 +364,11 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); - TU_ASSERT(desc_edpt->wMaxPacketSize.size <= 64); TU_ASSERT(epnum < EP_MAX); + // TODO ISO endpoint can be up to 1024 bytes + TU_ASSERT(desc_edpt->wMaxPacketSize.size <= (get_speed(dev) == TUSB_SPEED_HIGH ? 512 : 64)); + xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir); xfer->max_size = desc_edpt->wMaxPacketSize.size; @@ -447,6 +456,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t ((total_bytes & USB_OTG_DIEPTSIZ_XFRSIZ_Msk) << USB_OTG_DIEPTSIZ_XFRSIZ_Pos); in_ep[epnum].DIEPCTL |= USB_OTG_DIEPCTL_EPENA | USB_OTG_DIEPCTL_CNAK; + // Enable fifo empty interrupt only if there are something to put in the fifo. if(total_bytes != 0) { dev->DIEPEMPMSK |= (1 << epnum); @@ -793,10 +803,10 @@ void dcd_int_handler(uint8_t rhport) usb_otg->GINTSTS = USB_OTG_GINTSTS_ENUMDNE; - uint32_t const enum_spd = (dev->DSTS & USB_OTG_DSTS_ENUMSPD_Msk) >> USB_OTG_DSTS_ENUMSPD_Pos; + tusb_speed_t const speed = get_speed(dev); - set_turnaround(usb_otg, enum_spd); - dcd_event_bus_reset(rhport, (enum_spd == DCD_HIGH_SPEED) ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL, true); + set_turnaround(usb_otg, speed); + dcd_event_bus_reset(rhport, speed, true); } if(int_status & USB_OTG_GINTSTS_USBSUSP) -- cgit v1.3.1 From a347de6e50e98b339a1605dc927c0417e79b86a5 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 14 Jun 2020 18:28:45 +0700 Subject: revert CFG_TUSB_RHPORT0_MODE to previous way --- examples/device/cdc_msc/src/tusb_config.h | 9 ++++++++- hw/bsp/stm32h743eval/stm32h743eval.c | 3 +-- src/tusb_option.h | 23 ++++++++++++----------- 3 files changed, 21 insertions(+), 14 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 9beb9f6a2..b05d219c6 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -56,7 +56,14 @@ #endif // Device mode with rhport and speed defined by board.mk -#define CFG_TUSB_RHPORT0_MODE ((OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) << (8*BOARD_DEVICE_RHPORT_NUM)) +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + #define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build diff --git a/hw/bsp/stm32h743eval/stm32h743eval.c b/hw/bsp/stm32h743eval/stm32h743eval.c index 836f1ecab..a28110920 100644 --- a/hw/bsp/stm32h743eval/stm32h743eval.c +++ b/hw/bsp/stm32h743eval/stm32h743eval.c @@ -262,9 +262,8 @@ void board_init(void) // Enable VBUS sense (B device) via pin PA9 USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -#endif -#if BOARD_DEVICE_RHPORT_NUM == 1 +#elif BOARD_DEVICE_RHPORT_NUM == 1 // Despite being call USB2_OTG // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port diff --git a/src/tusb_option.h b/src/tusb_option.h index c251d578a..01bb1301a 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -117,10 +117,7 @@ //-------------------------------------------------------------------- // RootHub Mode Configuration -// -// Each byte of the CFG_TUSB_RHPORTx_MODE contains operation mode for -// a roothub port (device or host). Therefore each macro can have up to -// 4 ports. +// CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port //-------------------------------------------------------------------- // Lower 4-bit is operational mode @@ -138,27 +135,31 @@ #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE #endif -#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST ) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)) ) || \ - ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)) ) + +#ifndef CFG_TUSB_RHPORT1_MODE + #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE +#endif + +#if ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST ) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST )) || \ + ((CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) && (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE)) #error "TinyUSB currently does not support same modes on more than 1 roothub port" #endif // Which roothub port is configured as host -#define TUH_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HOST << 8)) ? 1 : -1) ) +#define TUH_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) ? 1 : -1) ) #define TUSB_OPT_HOST_ENABLED ( TUH_OPT_RHPORT >= 0 ) // Which roothub port is configured as device -#define TUD_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT0_MODE & (OPT_MODE_DEVICE << 8)) ? 1 : -1) ) +#define TUD_OPT_RHPORT ( (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) ? 0 : ((CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) ? 1 : -1) ) #if TUD_OPT_RHPORT == 0 - #define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED ) +#define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED ) #else - #define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT0_MODE & (OPT_MODE_HIGH_SPEED << 8) ) +#define TUD_OPT_HIGH_SPEED ( CFG_TUSB_RHPORT1_MODE & OPT_MODE_HIGH_SPEED ) #endif #define TUSB_OPT_DEVICE_ENABLED ( TUD_OPT_RHPORT >= 0 ) - //--------------------------------------------------------------------+ // COMMON OPTIONS //--------------------------------------------------------------------+ -- cgit v1.3.1 From 0bfa839ac0414632eb284779361ed6a34a98c672 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Jun 2020 23:06:17 +0700 Subject: clean up, update other example config --- examples/device/cdc_dual_ports/src/tusb_config.h | 29 ++++++++++++++++---- examples/device/cdc_msc/src/tusb_config.h | 1 + examples/device/cdc_msc_freertos/src/tusb_config.h | 31 +++++++++++++++++----- hw/bsp/stm32h743eval/stm32h743eval.c | 10 +++---- 4 files changed, 55 insertions(+), 16 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index 3536702bb..e3368e72f 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -34,18 +34,37 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif +// This example doesn't use an RTOS #define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index b05d219c6..c57c2ead8 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -64,6 +64,7 @@ #error "Incorrect RHPort configuration" #endif +// This example doesn't use an RTOS #define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 794e996b6..379fab971 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_FREERTOS +// This examples use FreeRTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/hw/bsp/stm32h743eval/stm32h743eval.c b/hw/bsp/stm32h743eval/stm32h743eval.c index a28110920..8bafc32cb 100644 --- a/hw/bsp/stm32h743eval/stm32h743eval.c +++ b/hw/bsp/stm32h743eval/stm32h743eval.c @@ -326,14 +326,14 @@ void board_init(void) // No VBUS sense USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + // Force device mode USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - // B-peripheral session valid override enabl - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; - HAL_PWREx_EnableUSBVoltageDetector(); #endif // rhport = 1 @@ -367,7 +367,7 @@ int board_uart_write(void const * buf, int len) } -#if CFG_TUSB_OS == OPT_OS_NONE +#if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; void SysTick_Handler (void) { -- cgit v1.3.1 From e89fea8237cb6f9d408ccc58710085b2d6790106 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Jun 2020 23:09:43 +0700 Subject: update midi --- examples/device/midi_test/src/tusb_config.h | 31 +++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) (limited to 'examples') diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index 8dd7ef9fe..fd109ad32 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 -- cgit v1.3.1 From c67b3a242e8873788e32bbb589836e265e8a9b53 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Jun 2020 23:34:09 +0700 Subject: update example config and descriptor with better Highspeed support --- .../device/cdc_msc_freertos/src/usb_descriptors.c | 2 +- examples/device/dfu_rt/src/tusb_config.h | 31 +++++++++++++++++---- .../device/dynamic_configuration/src/tusb_config.h | 31 +++++++++++++++++---- .../dynamic_configuration/src/usb_descriptors.c | 4 +-- examples/device/hid_composite/src/tusb_config.h | 31 +++++++++++++++++---- .../hid_composite_freertos/src/tusb_config.h | 30 ++++++++++++++++---- .../device/hid_generic_inout/src/tusb_config.h | 31 +++++++++++++++++---- examples/device/midi_test/src/usb_descriptors.c | 2 +- examples/device/msc_dual_lun/src/tusb_config.h | 31 +++++++++++++++++---- examples/device/msc_dual_lun/src/usb_descriptors.c | 2 +- .../device/net_lwip_webserver/src/tusb_config.h | 31 +++++++++++++++++---- examples/device/usbtmc/src/tusb_config.h | 32 ++++++++++++++++++---- examples/device/webusb_serial/src/tusb_config.h | 31 +++++++++++++++++---- test/test/device/msc/test_msc_device.c | 2 +- 14 files changed, 232 insertions(+), 59 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 7b22d46a7..62ab4f10f 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -123,7 +123,7 @@ uint8_t const desc_configuration[] = TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; diff --git a/examples/device/dfu_rt/src/tusb_config.h b/examples/device/dfu_rt/src/tusb_config.h index f6bf79e05..226573263 100644 --- a/examples/device/dfu_rt/src/tusb_config.h +++ b/examples/device/dfu_rt/src/tusb_config.h @@ -16,19 +16,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index 958a446ac..0950305eb 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 63468b496..a2017f954 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -166,7 +166,7 @@ uint8_t const desc_configuration_0[] = TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size - TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; @@ -176,7 +176,7 @@ uint8_t const desc_configuraiton_1[] = TUD_CONFIG_DESCRIPTOR(1, ITF_1_NUM_TOTAL, 0, CONFIG_1_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index adc795cc2..abc243436 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index e7aea1863..677a9b2c6 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -34,18 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505 -#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_FREERTOS +// This examples use FreeRTOS +#define CFG_TUSB_OS OPT_OS_FREERTOS // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index 4dc3ecea4..39eebbbeb 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 72ab1416c..2867a205f 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -94,7 +94,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64) + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, TUD_OPT_HIGH_SPEED ? 512 : 64) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index 841a8aa00..1ee3faec4 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index 9128c4f75..d0c915b1d 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -102,7 +102,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index 45c0b8ac1..b6d0e7a86 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h index 1022125bb..3fab286a9 100644 --- a/examples/device/usbtmc/src/tusb_config.h +++ b/examples/device/usbtmc/src/tusb_config.h @@ -16,18 +16,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE + +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index e7e0b81bc..c226eefa6 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/test/test/device/msc/test_msc_device.c b/test/test/device/msc/test_msc_device.c index 34bd90c7e..0382fb327 100644 --- a/test/test/device/msc/test_msc_device.c +++ b/test/test/device/msc/test_msc_device.c @@ -66,7 +66,7 @@ uint8_t const data_desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EDPT_MSC_OUT, EDPT_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EDPT_MSC_OUT, EDPT_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; tusb_control_request_t const request_set_configuration = -- cgit v1.3.1 From d96fa8d407d08e95caf93621362e1f3fed57be36 Mon Sep 17 00:00:00 2001 From: Uwe Bonnes Date: Sun, 21 Jun 2020 14:33:47 +0200 Subject: examples/readme.md: Add hint to build for debug. --- examples/readme.md | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'examples') diff --git a/examples/readme.md b/examples/readme.md index 1c85214e9..ca28d4881 100644 --- a/examples/readme.md +++ b/examples/readme.md @@ -32,6 +32,13 @@ Then compile with `make BOARD=[your_board] all`, for example $ make BOARD=feather_nrf52840_express all ``` + +To compile for debugging with debug symbols add DEBUG=1, for example + +``` +$ make BOARD=feather_nrf52840_express DEBUG=1 all +``` + ### Debug Log ### Log Level -- cgit v1.3.1 From 50b569ad1be86930ae968655ec574362a2b57aa6 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 29 Jun 2020 16:52:08 +0700 Subject: added esp32s2 kaluga bsp --- docs/boards.md | 1 + examples/device/board_test/CMakeLists.txt | 2 +- examples/device/cdc_msc_freertos/CMakeLists.txt | 2 +- examples/device/hid_composite_freertos/CMakeLists.txt | 2 +- examples/rules.mk | 5 ++--- hw/bsp/esp32s2_saola_1/CMakeLists.txt | 2 +- hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c | 4 ++-- 7 files changed, 9 insertions(+), 9 deletions(-) (limited to 'examples') diff --git a/docs/boards.md b/docs/boards.md index 202602d30..46d071853 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -11,6 +11,7 @@ This code base already had supported for a handful of following boards (sorted a ### Espressif ESP32-S2 +- [ESP32-S2-Kaluga-1](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/hw-reference/esp32s2/user-guide-esp32-s2-kaluga-1-kit.html) - [ESP32-S2-Saola-1](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/hw-reference/esp32s2/user-guide-saola-1-v1.2.html) ### MicroChip SAMD diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index 4f0359922..f0437dd04 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -7,7 +7,7 @@ set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2_saola_1") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/${BOARD}") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s2) diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index b0e2c2cea..339f43a09 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -7,7 +7,7 @@ set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2_saola_1") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/${BOARD}") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s2) diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt index bfd0677e0..a429a1336 100644 --- a/examples/device/hid_composite_freertos/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/CMakeLists.txt @@ -7,7 +7,7 @@ set(TOP "../../..") get_filename_component(TOP "${TOP}" REALPATH) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2_saola_1") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/${BOARD}") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s2) diff --git a/examples/rules.mk b/examples/rules.mk index 2f4c8b860..eeb548d08 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -12,11 +12,10 @@ all: idf.py -B$(BUILD) -DBOARD=$(BOARD) build clean: - idf.py -B$(BUILD) clean + idf.py -B$(BUILD) -DBOARD=$(BOARD) clean flash: - @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyUSB0) - idf.py -B$(BUILD) -p $(SERIAL) flash + idf.py -B$(BUILD) -DBOARD=$(BOARD) flash else # GNU Make build system diff --git a/hw/bsp/esp32s2_saola_1/CMakeLists.txt b/hw/bsp/esp32s2_saola_1/CMakeLists.txt index 379b2e3d0..629b3104a 100644 --- a/hw/bsp/esp32s2_saola_1/CMakeLists.txt +++ b/hw/bsp/esp32s2_saola_1/CMakeLists.txt @@ -1,4 +1,4 @@ -idf_component_register(SRCS "esp32s2_saola_1.c" "led_strip/src/led_strip_rmt_ws2812.c" +idf_component_register(SRCS "${BOARD}.c" "led_strip/src/led_strip_rmt_ws2812.c" INCLUDE_DIRS "led_strip/include" PRIV_REQUIRES "driver" REQUIRES freertos src) diff --git a/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c b/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c index bbcdab6d2..a30d3c81e 100644 --- a/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c +++ b/hw/bsp/esp32s2_saola_1/esp32s2_saola_1.c @@ -39,8 +39,8 @@ // Note: On the production version (v1.2) WS2812 is connected to GPIO 18, // however earlier revision v1.1 WS2812 is connected to GPIO 17 -//#define LED_PIN 18 // v1.2 and later -#define LED_PIN 17 // v1.1 +//#define LED_PIN 17 // v1.1 +#define LED_PIN 18 // v1.2 and later #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 -- cgit v1.3.1 From f6660c39a19dda4f4b3c00ce007dfd3e9fd47d7f Mon Sep 17 00:00:00 2001 From: Uwe Bonnes Date: Sun, 21 Jun 2020 20:53:52 +0200 Subject: Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration --- examples/readme.md | 4 + hw/bsp/stm32f723disco/STM32F723xE_FLASH.ld | 167 ++++++++++ hw/bsp/stm32f723disco/board.mk | 59 ++++ hw/bsp/stm32f723disco/stm32f723disco.c | 300 +++++++++++++++++ hw/bsp/stm32f723disco/stm32f7xx_hal_conf.h | 472 +++++++++++++++++++++++++++ hw/bsp/stm32f746disco/STM32F746ZGTx_FLASH.ld | 167 ++++++++++ hw/bsp/stm32f746disco/board.mk | 59 ++++ hw/bsp/stm32f746disco/stm32f746disco.c | 353 ++++++++++++++++++++ hw/bsp/stm32f746disco/stm32f7xx_hal_conf.h | 472 +++++++++++++++++++++++++++ hw/bsp/stm32f769disco/STM32F769ZITx_FLASH.ld | 167 ++++++++++ hw/bsp/stm32f769disco/board.mk | 51 +++ hw/bsp/stm32f769disco/stm32f769disco.c | 297 +++++++++++++++++ hw/bsp/stm32f769disco/stm32f7xx_hal_conf.h | 472 +++++++++++++++++++++++++++ 13 files changed, 3040 insertions(+) create mode 100644 hw/bsp/stm32f723disco/STM32F723xE_FLASH.ld create mode 100644 hw/bsp/stm32f723disco/board.mk create mode 100644 hw/bsp/stm32f723disco/stm32f723disco.c create mode 100644 hw/bsp/stm32f723disco/stm32f7xx_hal_conf.h create mode 100644 hw/bsp/stm32f746disco/STM32F746ZGTx_FLASH.ld create mode 100644 hw/bsp/stm32f746disco/board.mk create mode 100644 hw/bsp/stm32f746disco/stm32f746disco.c create mode 100644 hw/bsp/stm32f746disco/stm32f7xx_hal_conf.h create mode 100644 hw/bsp/stm32f769disco/STM32F769ZITx_FLASH.ld create mode 100644 hw/bsp/stm32f769disco/board.mk create mode 100644 hw/bsp/stm32f769disco/stm32f769disco.c create mode 100644 hw/bsp/stm32f769disco/stm32f7xx_hal_conf.h (limited to 'examples') diff --git a/examples/readme.md b/examples/readme.md index ca28d4881..790427cd2 100644 --- a/examples/readme.md +++ b/examples/readme.md @@ -37,6 +37,10 @@ To compile for debugging with debug symbols add DEBUG=1, for example ``` $ make BOARD=feather_nrf52840_express DEBUG=1 all +If a board has several ports, one port is choosen by default in the individual board.mk file. Choose another port with PORT=x. For example to select the HS port of a STM32F746Disco board, use: + +``` +$ make BOARD=stm32f746disco PORT=1 all ``` ### Debug Log diff --git a/hw/bsp/stm32f723disco/STM32F723xE_FLASH.ld b/hw/bsp/stm32f723disco/STM32F723xE_FLASH.ld new file mode 100644 index 000000000..8645ce5c5 --- /dev/null +++ b/hw/bsp/stm32f723disco/STM32F723xE_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F723xE Device with +** 512KByte FLASH, 256KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20040000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x460; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 256K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f723disco/board.mk b/hw/bsp/stm32f723disco/board.mk new file mode 100644 index 000000000..2bd3b0756 --- /dev/null +++ b/hw/bsp/stm32f723disco/board.mk @@ -0,0 +1,59 @@ +PORT ?= 0 + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -nostdlib -nostartfiles \ + -DSTM32F723xx \ + -DHSE_VALUE=25000000 \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + +ifeq ($(PORT), 1) +CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED +$(info "PORT1 HS") +else +$(info "PORT0") +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=shadow -Wno-error=cast-align + +ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F7xx_HAL_Driver +ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F7xx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32F723xE_FLASH.ld + +SRC_C += \ + $(ST_CMSIS)/Source/Templates/system_stm32f7xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_pwr_ex.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f723xx.s + +INC += \ + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For TinyUSB port source +VENDOR = st +CHIP_FAMILY = synopsys + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32f723disco/stm32f723disco.c b/hw/bsp/stm32f723disco/stm32f723disco.c new file mode 100644 index 000000000..03057edc7 --- /dev/null +++ b/hw/bsp/stm32f723disco/stm32f723disco.c @@ -0,0 +1,300 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de), + * Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" + +#include "stm32f7xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +// Despite being call USB2_OTG +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void OTG_HS_IRQHandler(void) +{ + tud_int_handler(1); +} + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_1 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +#define UARTx USART6 +#define UART_GPIO_PORT GPIOC +#define UART_GPIO_AF GPIO_AF8_USART6 +#define UART_TX_PIN GPIO_PIN_6 +#define UART_RX_PIN GPIO_PIN_7 + +UART_HandleTypeDef UartHandle; + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED, OTG_HS + __HAL_RCC_GPIOC_CLK_ENABLE(); // Button + __HAL_RCC_GPIOD_CLK_ENABLE(); // Uart tx, rx + __HAL_RCC_USART6_CLK_ENABLE(); // Uart module +} + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 216000000 + * HCLK(Hz) = 216000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 25000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 432 + * PLL_P = 2 + * PLL_Q = 9 + * VDD(V) = 3.3 + * Main regulator output voltage = Scale1 mode + * Flash Latency(WS) = 7 + * The USB clock configuration from PLLSAI: + * PLLSAIP = 8 + * PLLSAIN = 384 + * PLLSAIQ = 7 + * @param None + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +void board_init(void) +{ + + + SystemClock_Config(); + all_rcc_clk_enable(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UARTx; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + +#if BOARD_DEVICE_RHPORT_NUM == 0 + /* Configure USB FS GPIOs */ + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure OTG-FS ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; + +#else + /* Configure USB HS GPIOs */ + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_14 | GPIO_PIN_15); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + // Enable HS VBUS sense (B device) via pin PB13 + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; + + /* Configure OTG-HS ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_13; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* Enable USB HS Clocks */ + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + + // Force device mode + USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; + USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/stm32f723disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f723disco/stm32f7xx_hal_conf.h new file mode 100644 index 000000000..03dec8f0d --- /dev/null +++ b/hw/bsp/stm32f723disco/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f746disco/STM32F746ZGTx_FLASH.ld b/hw/bsp/stm32f746disco/STM32F746ZGTx_FLASH.ld new file mode 100644 index 000000000..045ec76f9 --- /dev/null +++ b/hw/bsp/stm32f746disco/STM32F746ZGTx_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F746ZGTx Device with +** 1024KByte FLASH, 320KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20050000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x460; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 320K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 1024K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f746disco/board.mk b/hw/bsp/stm32f746disco/board.mk new file mode 100644 index 000000000..76a54cdfd --- /dev/null +++ b/hw/bsp/stm32f746disco/board.mk @@ -0,0 +1,59 @@ +PORT ?= 0 + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -nostdlib -nostartfiles \ + -DSTM32F746xx \ + -DHSE_VALUE=25000000 \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + +ifeq ($(PORT), 1) +CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED +$(info "PORT1 HS") +else +$(info "PORT0") +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=shadow -Wno-error=cast-align + +ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F7xx_HAL_Driver +ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F7xx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32F746ZGTx_FLASH.ld + +SRC_C += \ + $(ST_CMSIS)/Source/Templates/system_stm32f7xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_pwr_ex.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f746xx.s + +INC += \ + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For TinyUSB port source +VENDOR = st +CHIP_FAMILY = synopsys + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32f746disco/stm32f746disco.c b/hw/bsp/stm32f746disco/stm32f746disco.c new file mode 100644 index 000000000..c90182fcf --- /dev/null +++ b/hw/bsp/stm32f746disco/stm32f746disco.c @@ -0,0 +1,353 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de), + * Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" + +#include "stm32f7xx_hal.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Despite being call USB2_OTG +// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +// Despite being call USB2_OTG +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void OTG_HS_IRQHandler(void) +{ + tud_int_handler(1); +} + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOI +#define LED_PIN GPIO_PIN_1 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOI +#define BUTTON_PIN GPIO_PIN_11 +#define BUTTON_STATE_ACTIVE 1 + +#define UARTx USART1 +#define UART_TX_GPIO_PORT GPIOA +#define UART_RX_GPIO_PORT GPIOB +#define UART_TX_GPIO_AF GPIO_AF7_USART1 +#define UART_RX_GPIO_AF GPIO_AF7_USART1 +#define UART_TX_PIN GPIO_PIN_9 +#define UART_RX_PIN GPIO_PIN_7 + +UART_HandleTypeDef UartHandle; + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // Uart rx + __HAL_RCC_GPIOI_CLK_ENABLE(); // Button + __HAL_RCC_USART1_CLK_ENABLE(); // Uart module +} + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 216000000 + * HCLK(Hz) = 216000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 25000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 432 + * PLL_P = 2 + * PLL_Q = 9 + * VDD(V) = 3.3 + * Main regulator output voltage = Scale1 mode + * Flash Latency(WS) = 7 + * The USB clock configuration from PLLSAI: + * PLLSAIP = 8 + * PLLSAIN = 384 + * PLLSAIQ = 7 + * @param None + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +void board_init(void) +{ + + + SystemClock_Config(); + all_rcc_clk_enable(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart TX + GPIO_InitStruct.Pin = UART_TX_PIN ; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_TX_GPIO_AF; + HAL_GPIO_Init(UART_TX_GPIO_PORT, &GPIO_InitStruct); + + // Uart RX + GPIO_InitStruct.Pin = UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_RX_GPIO_AF; + HAL_GPIO_Init(UART_RX_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UARTx; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + +#if BOARD_DEVICE_RHPORT_NUM == 0 + // Despite being call USB2_OTG + // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port + // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP + + /* Configure USB FS GPIOs */ + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin collides with USART TX*/ +// GPIO_InitStruct.Pin = GPIO_PIN_9; +// GPIO_InitStruct.Mode = GPIO_MODE_INPUT; +// GPIO_InitStruct.Pull = GPIO_NOPULL; +// HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure OTG-FS ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 +// USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#define DEVICE_BASE (USB_OTG_DeviceTypeDef *) (USB_OTG_FS_PERIPH_BASE + USB_OTG_DEVICE_BASE) + USB_OTG_DeviceTypeDef * dev = DEVICE_BASE; + dev->DCTL |= USB_OTG_DCTL_SDIS; + + /* Deactivate VBUS Sensing B */ + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + /* B-peripheral session valid override enable */ + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#elif BOARD_DEVICE_RHPORT_NUM == 1 + // Despite being call USB2_OTG + // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port + __GPIOA_CLK_ENABLE(); + __GPIOB_CLK_ENABLE(); + __GPIOC_CLK_ENABLE(); + __GPIOH_CLK_ENABLE(); + + /* ULPI CK */ + GPIO_InitStruct.Pin = GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* ULPI D0 */ + GPIO_InitStruct.Pin = GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* ULPI D1 D2 D3 D4 D5 D6 D7 */ + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* ULPI STP DIR */ + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* NXT */ + GPIO_InitStruct.Pin = GPIO_PIN_4; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + // Enable ULPI clock + __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); + + /* Enable USB HS Clocks */ + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + + // No VBUS sense + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + + // Force device mode + USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; + USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + +#endif // rhport = 1 +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/stm32f746disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f746disco/stm32f7xx_hal_conf.h new file mode 100644 index 000000000..03dec8f0d --- /dev/null +++ b/hw/bsp/stm32f746disco/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f769disco/STM32F769ZITx_FLASH.ld b/hw/bsp/stm32f769disco/STM32F769ZITx_FLASH.ld new file mode 100644 index 000000000..378ed80dd --- /dev/null +++ b/hw/bsp/stm32f769disco/STM32F769ZITx_FLASH.ld @@ -0,0 +1,167 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32F767ZITx Device with +** 2048KByte FLASH, 512KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20080000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 512K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f769disco/board.mk b/hw/bsp/stm32f769disco/board.mk new file mode 100644 index 000000000..62c05cca5 --- /dev/null +++ b/hw/bsp/stm32f769disco/board.mk @@ -0,0 +1,51 @@ +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -nostdlib -nostartfiles \ + -DSTM32F769xx \ + -DHSE_VALUE=25000000 \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ + -DBOARD_DEVICE_RHPORT_NUM=1 \ + -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=cast-align -Wno-error=shadow + +ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F7xx_HAL_Driver +ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F7xx + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/STM32F769ZITx_FLASH.ld + +SRC_C += \ + $(ST_CMSIS)/Source/Templates/system_stm32f7xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32f7xx_hal_pwr_ex.c + +SRC_S += \ + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f769xx.s + +INC += \ + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) + +# For TinyUSB port source +VENDOR = st +CHIP_FAMILY = synopsys + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32f769disco/stm32f769disco.c b/hw/bsp/stm32f769disco/stm32f769disco.c new file mode 100644 index 000000000..2664fe0e0 --- /dev/null +++ b/hw/bsp/stm32f769disco/stm32f769disco.c @@ -0,0 +1,297 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de), + * Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" + +#include "stm32f7xx_hal.h" + +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_HS_IRQHandler(void) +{ + tud_int_handler(1); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#define LED_PORT GPIOJ +#define LED_PIN GPIO_PIN_12 +#define LED_STATE_ON 5 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + +#define UARTx USART1 +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF7_USART1 +#define UART_TX_PIN GPIO_PIN_9 +#define UART_RX_PIN GPIO_PIN_10 + +UART_HandleTypeDef UartHandle; + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // Button, UART, ULPI CLK|D0 + __HAL_RCC_GPIOB_CLK_ENABLE(); // ULPI D1-7 + __HAL_RCC_GPIOC_CLK_ENABLE(); // ULPI STP + __HAL_RCC_GPIOH_CLK_ENABLE(); // ULPI NXT + __HAL_RCC_GPIOI_CLK_ENABLE(); // ULPI NXT + __HAL_RCC_GPIOJ_CLK_ENABLE(); // LED + __HAL_RCC_USART1_CLK_ENABLE(); // Uart module +} + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 216000000 + * HCLK(Hz) = 216000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 25000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 432 + * PLL_P = 2 + * PLL_Q = 9 + * PLL_R = 7 + * VDD(V) = 3.3 + * Main regulator output voltage = Scale1 mode + * Flash Latency(WS) = 7 + * The USB clock configuration from PLLSAI: + * PLLSAIP = 8 + * PLLSAIN = 384 + * PLLSAIQ = 7 + * @param None + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable Power Control clock */ + __HAL_RCC_PWR_CLK_ENABLE(); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 432; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 9; + RCC_OscInitStruct.PLL.PLLR = 7; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Activate the OverDrive to reach the 216 MHz Frequency */ + HAL_PWREx_EnableOverDrive(); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7); +} + +void board_init(void) +{ + SystemClock_Config(); + all_rcc_clk_enable(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UARTx; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + + /* Configure USB HS GPIOs */ + /* ULPI CLK */ + GPIO_InitStruct.Pin = GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* D0 */ + GPIO_InitStruct.Pin = GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* D1 D2 D3 D4 D5 D6 D7 */ + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* STP */ + GPIO_InitStruct.Pin = GPIO_PIN_0; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* NXT */ + GPIO_InitStruct.Pin = GPIO_PIN_4; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + /* DIR */ + GPIO_InitStruct.Pin = GPIO_PIN_11; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); + + // Enable ULPI clock + __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); + + /* Enable USB HS Clocks */ + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + + // No VBUS sense + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; + + // Force device mode + USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; + USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/stm32f769disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f769disco/stm32f7xx_hal_conf.h new file mode 100644 index 000000000..03dec8f0d --- /dev/null +++ b/hw/bsp/stm32f769disco/stm32f7xx_hal_conf.h @@ -0,0 +1,472 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_CONF_H +#define __STM32F7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ + + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define ART_ACCLERATOR_ENABLE 1U /* To enable instruction cache and prefetch */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIOS register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + +/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)5) /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ +/* LAN8742A PHY Address*/ +#define LAN8742A_PHY_ADDRESS 0x00 +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x00000FFF) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) + +#define PHY_READ_TO ((uint32_t)0x0000FFFF) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ + +#define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0004) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0010) /*!< PHY Duplex mask */ + + +#define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ +#define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f7xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f7xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32f7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32f7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.3.1 From 62239bb576c37e8e240879e5783d4f181f42877e Mon Sep 17 00:00:00 2001 From: Uwe Bonnes Date: Tue, 23 Jun 2020 13:55:07 +0200 Subject: cdc-acm: Use 512 bytes when in HS mode. Removes error: config 1 interface 2 altsetting 0 bulk endpoint 0x3 has invalid maxpacket 64 while enumerationg. --- examples/device/cdc_msc/src/tusb_config.h | 4 ++-- examples/device/cdc_msc/src/usb_descriptors.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index c57c2ead8..13021d5d3 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -102,8 +102,8 @@ #define CFG_TUD_VENDOR 0 // CDC FIFO size of TX and RX -#define CFG_TUD_CDC_RX_BUFSIZE 64 -#define CFG_TUD_CDC_TX_BUFSIZE 64 +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MSC Buffer size of Device Mass storage #define CFG_TUD_MSC_BUFSIZE 512 diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 62ab4f10f..9a4d71f24 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -120,7 +120,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), // Interface number, string index, EP Out & EP In address, EP size TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), -- cgit v1.3.1 From 400c2d2e503550f6d9da10be797a852f15d1877e Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Jun 2020 23:26:51 +0700 Subject: correct led dfu_rt example also add example usage note --- examples/device/dfu_rt/src/main.c | 58 ++++++++++++++------------------------- 1 file changed, 21 insertions(+), 37 deletions(-) (limited to 'examples') diff --git a/examples/device/dfu_rt/src/main.c b/examples/device/dfu_rt/src/main.c index 666d89649..029ff7312 100644 --- a/examples/device/dfu_rt/src/main.c +++ b/examples/device/dfu_rt/src/main.c @@ -23,6 +23,19 @@ * */ +/* After device is enumerated, run following command + * + * $ dfu-util -l + * + * It should be able to list our device as in Runtime mode. Then run + * + * $ dfu-util -e + * + * This will send DETTACH command to put device into bootloader. Since this example + * is minimal, it doesn't actually go into DFU mode but rather change the LED blinking + * pattern to fast rate as indicator. + */ + #include #include #include @@ -41,9 +54,9 @@ * - 2500 ms : device is suspended */ enum { - BLINK_DFU_MODE = 1000, + BLINK_DFU_MODE = 100, BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 0, + BLINK_MOUNTED = 1000, BLINK_SUSPENDED = 2500, }; @@ -104,48 +117,19 @@ void tud_dfu_rt_reboot_to_dfu(void) blink_interval_ms = BLINK_DFU_MODE; } - //--------------------------------------------------------------------+ // BLINKING TASK + Indicator pulse //--------------------------------------------------------------------+ - -volatile uint8_t doPulse = false; -// called from USB context -void led_indicator_pulse(void) { - doPulse = true; -} - void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; - if(blink_interval_ms == BLINK_MOUNTED) // Mounted - { - if(doPulse) - { - led_state = true; - board_led_write(true); - start_ms = board_millis(); - doPulse = false; - } - else if (led_state == true) - { - if ( board_millis() - start_ms < 750) //Spec says blink must be between 500 and 1000 ms. - { - return; // not enough time - } - led_state = false; - board_led_write(false); - } - } - else - { - // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time - start_ms += blink_interval_ms; - board_led_write(led_state); - led_state = 1 - led_state; // toggle - } + // Blink every interval ms + if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + start_ms += blink_interval_ms; + + board_led_write(led_state); + led_state = 1 - led_state; // toggle } -- cgit v1.3.1 From f82655a21269bcb9472a07c4cda5f47d85dbc007 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 6 Jul 2020 18:55:31 +0700 Subject: correct EP Size for cdc dual and webusb example --- examples/device/cdc_dual_ports/src/tusb_config.h | 4 ++-- examples/device/cdc_dual_ports/src/usb_descriptors.c | 4 ++-- examples/device/webusb_serial/src/tusb_config.h | 8 ++++---- examples/device/webusb_serial/src/usb_descriptors.c | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index e3368e72f..69001bdec 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -101,8 +101,8 @@ #define CFG_TUD_VENDOR 0 // CDC FIFO size of TX and RX -#define CFG_TUD_CDC_RX_BUFSIZE 64 -#define CFG_TUD_CDC_TX_BUFSIZE 64 +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #ifdef __cplusplus diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index 03800d693..a4674b7a9 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -97,10 +97,10 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC1, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC1, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, TUD_OPT_HIGH_SPEED ? 512 : 64), // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC2, 4, 0x83, 8, EPNUM_CDC + 2, 0x80 | (EPNUM_CDC + 2), 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC2, 4, 0x83, 8, EPNUM_CDC + 2, 0x80 | (EPNUM_CDC + 2), TUD_OPT_HIGH_SPEED ? 512 : 64), }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index c226eefa6..a9b7a82d5 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -101,13 +101,13 @@ #define CFG_TUD_VENDOR 1 // CDC FIFO size of TX and RX -#define CFG_TUD_CDC_RX_BUFSIZE 64 -#define CFG_TUD_CDC_TX_BUFSIZE 64 +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // Vendor FIFO size of TX and RX // If not configured vendor endpoints will not be buffered -#define CFG_TUD_VENDOR_RX_BUFSIZE 64 -#define CFG_TUD_VENDOR_TX_BUFSIZE 64 +#define CFG_TUD_VENDOR_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_VENDOR_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #ifdef __cplusplus diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 1a2df76ca..a39b34c3c 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -99,10 +99,10 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, TUD_OPT_HIGH_SPEED ? 512 : 64), // Interface number, string index, EP Out & IN address, EP size - TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR, 0x80 | EPNUM_VENDOR, 64) + TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR, 0x80 | EPNUM_VENDOR, TUD_OPT_HIGH_SPEED ? 512 : 64) }; // Invoked when received GET CONFIGURATION DESCRIPTOR -- cgit v1.3.1 From 0fd074afd85d84f162ddebbc9b8e009f9136809b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 8 Jul 2020 16:29:48 +0700 Subject: change REDUCE_SPEED=0/1 to explicitly SPEED=high/full update readme, boards.md to add link to new stm boards --- docs/boards.md | 2 ++ examples/readme.md | 31 +++++++++++++++++++++---------- hw/bsp/stlinkv3mini/board.mk | 13 +++++++------ hw/bsp/stm32f723disco/board.mk | 18 +++++++++--------- hw/bsp/stm32f746disco/board.mk | 18 +++++++++--------- hw/bsp/stm32f769disco/board.mk | 14 ++++++++------ src/portable/st/synopsys/dcd_synopsys.c | 2 +- 7 files changed, 57 insertions(+), 41 deletions(-) (limited to 'examples') diff --git a/docs/boards.md b/docs/boards.md index d3dcec375..271ca2844 100644 --- a/docs/boards.md +++ b/docs/boards.md @@ -87,6 +87,7 @@ This code base already had supported for a handful of following boards (sorted a - [Micro Python PyBoard v1.1](https://store.micropython.org/product/PYBv1.1) - [STLink-V3 Mini](https://www.st.com/en/development-tools/stlink-v3mini.html) - [STM32 L035c8 Discovery](https://www.st.com/en/evaluation-tools/32l0538discovery.html) +- [STM32 L4R5zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html) - [STM32 F070rb Nucleo](https://www.st.com/en/evaluation-tools/nucleo-f070rb.html) - [STM32 F072rb Discovery](https://www.st.com/en/evaluation-tools/32f072bdiscovery.html) - STM32 F103c Blue Pill @@ -104,6 +105,7 @@ This code base already had supported for a handful of following boards (sorted a - [STM32 F769i Discovery](https://www.st.com/en/evaluation-tools/32f769idiscovery.html) - [STM32 H743zi Nucleo](https://www.st.com/en/evaluation-tools/nucleo-h743zi.html) - [STM32 H743i Evaluation](https://www.st.com/en/evaluation-tools/stm32h743i-eval.html) +- [STM32 H745i Discovery](https://www.st.com/en/evaluation-tools/stm32h745i-disco.html) ### TI diff --git a/examples/readme.md b/examples/readme.md index 790427cd2..f6cd380b6 100644 --- a/examples/readme.md +++ b/examples/readme.md @@ -32,28 +32,39 @@ Then compile with `make BOARD=[your_board] all`, for example $ make BOARD=feather_nrf52840_express all ``` +**Port Selection** -To compile for debugging with debug symbols add DEBUG=1, for example +If a board has several ports, one port is chosen by default in the individual board.mk file. Use option `PORT=x` To choose another port. For example to select the HS port of a STM32F746Disco board, use: ``` -$ make BOARD=feather_nrf52840_express DEBUG=1 all -If a board has several ports, one port is choosen by default in the individual board.mk file. Choose another port with PORT=x. For example to select the HS port of a STM32F746Disco board, use: +$ make BOARD=stm32f746disco PORT=1 all +``` + +**Port Speed** + +A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option `SPEED=full/high` e.g To force F723 operate at full instead of default high speed ``` -$ make BOARD=stm32f746disco PORT=1 all +$ make BOARD=stm32f746disco SPEED=full all ``` -### Debug Log +### Debug + +To compile for debugging with debug symbols add `DEBUG=1`, for example + +``` +$ make BOARD=feather_nrf52840_express DEBUG=1 all +``` -### Log Level +#### Log Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional `LOG=`. LOG=1 will only print out error message, LOG=2 print more information with on-going events. LOG=3 or higher is not used yet. ``` -$ make LOG=2 BOARD=feather_nrf52840_express all +$ make BOARD=feather_nrf52840_express LOG=2 all ``` -### Logger +#### Logger By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols: @@ -67,8 +78,8 @@ By default log message is printed via on-board UART which is slow and take lots - Software viewer should be provided along with your debugger driver. ``` -$ make LOG=2 LOGGER=rtt BOARD=feather_nrf52840_express all -$ make LOG=2 LOGGER=swo BOARD=feather_nrf52840_express all +$ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all +$ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all ``` ## Flash diff --git a/hw/bsp/stlinkv3mini/board.mk b/hw/bsp/stlinkv3mini/board.mk index b77fb5a51..4ca6cfd68 100644 --- a/hw/bsp/stlinkv3mini/board.mk +++ b/hw/bsp/stlinkv3mini/board.mk @@ -1,6 +1,6 @@ # Only OTG-HS has a connector on this board -REDUCE_SPEED ?= 0 +SPEED ?= high CFLAGS += \ -flto \ @@ -14,12 +14,13 @@ CFLAGS += \ -DHSE_VALUE=25000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ -DBOARD_DEVICE_RHPORT_NUM=1 -ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") + +ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") endif # mcu driver cause following warnings diff --git a/hw/bsp/stm32f723disco/board.mk b/hw/bsp/stm32f723disco/board.mk index 47148ec4d..9ec23bfde 100644 --- a/hw/bsp/stm32f723disco/board.mk +++ b/hw/bsp/stm32f723disco/board.mk @@ -1,5 +1,5 @@ PORT ?= 1 -REDUCE_SPEED ?= 0 +SPEED ?= high CFLAGS += \ -flto \ @@ -15,15 +15,15 @@ CFLAGS += \ -DBOARD_DEVICE_RHPORT_NUM=$(PORT) ifeq ($(PORT), 1) - ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") - else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") - endif + ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") + else + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") + endif else -$(info "Using OTG_FS") + $(info "Using OTG_FS") endif # mcu driver cause following warnings diff --git a/hw/bsp/stm32f746disco/board.mk b/hw/bsp/stm32f746disco/board.mk index d7329a28f..48cb3f141 100644 --- a/hw/bsp/stm32f746disco/board.mk +++ b/hw/bsp/stm32f746disco/board.mk @@ -1,5 +1,5 @@ PORT ?= 0 -REDUCE_SPEED ?= 0 +SPEED ?= high CFLAGS += \ -flto \ @@ -15,15 +15,15 @@ CFLAGS += \ -DBOARD_DEVICE_RHPORT_NUM=$(PORT) ifeq ($(PORT), 1) - ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") - else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") - endif + ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") + else + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") + endif else -$(info "Using OTG_FS") + $(info "Using OTG_FS") endif # mcu driver cause following warnings diff --git a/hw/bsp/stm32f769disco/board.mk b/hw/bsp/stm32f769disco/board.mk index 43b677ddd..962dddc68 100644 --- a/hw/bsp/stm32f769disco/board.mk +++ b/hw/bsp/stm32f769disco/board.mk @@ -1,4 +1,6 @@ -REDUCE_SPEED ?= 0 +# Only OTG-HS has a connector on this board + +SPEED ?= high CFLAGS += \ -flto \ @@ -13,12 +15,12 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ -DBOARD_DEVICE_RHPORT_NUM=1 \ -ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") +ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") endif # suppress warning caused by vendor mcu driver diff --git a/src/portable/st/synopsys/dcd_synopsys.c b/src/portable/st/synopsys/dcd_synopsys.c index 35b7f44f9..7eb63e52f 100644 --- a/src/portable/st/synopsys/dcd_synopsys.c +++ b/src/portable/st/synopsys/dcd_synopsys.c @@ -403,7 +403,7 @@ void dcd_init (uint8_t rhport) // Select default internal VBUS Indicator and Drive for ULPI usb_otg->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI); - #if defined(USB_HS_PHYC) +#if defined(USB_HS_PHYC) // Highspeed with embedded UTMI PHYC // Select UTMI Interface -- cgit v1.3.1 From 706413f7510a78e262cf3cb398256e06fadbd500 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Jul 2020 00:44:09 +0700 Subject: add tud_speed_get() - define both fs and hs configuration descriptor - rename CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE with default size of 64 for FS, and 512 for HS --- .../device/cdc_dual_ports/src/usb_descriptors.c | 48 +++++++++++++++++----- examples/device/cdc_msc/src/usb_descriptors.c | 28 +++++++++++-- .../device/webusb_serial/src/usb_descriptors.c | 6 +-- examples/rules.mk | 8 +++- src/class/cdc/cdc_device.c | 14 +++---- src/class/cdc/cdc_device.h | 4 +- src/device/usbd.c | 5 +++ src/device/usbd.h | 3 ++ tools/build_all.py | 2 +- 9 files changed, 90 insertions(+), 28 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index a4674b7a9..a27a2cdbd 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -74,10 +74,10 @@ uint8_t const * tud_descriptor_device_cb(void) //--------------------------------------------------------------------+ enum { - ITF_NUM_CDC1 = 0, - ITF_NUM_CDC_DATA1, - ITF_NUM_CDC2, - ITF_NUM_CDC_DATA2, + ITF_NUM_CDC_0 = 0, + ITF_NUM_CDC_0_DATA, + ITF_NUM_CDC_1, + ITF_NUM_CDC_1_DATA, ITF_NUM_TOTAL }; @@ -86,30 +86,58 @@ enum #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_CDC 2 + #define EPNUM_CDC_0_NOTIF 0x81 + #define EPNUM_CDC_0_DATA 0x02 + + #define EPNUM_CDC_1_NOTIF 0x84 + #define EPNUM_CDC_1_DATA 0x05 #else - #define EPNUM_CDC 2 + #define EPNUM_CDC_0_NOTIF 0x81 + #define EPNUM_CDC_0_DATA 0x02 + + #define EPNUM_CDC_1_NOTIF 0x83 + #define EPNUM_CDC_1_DATA 0x04 #endif -uint8_t const desc_configuration[] = +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC1, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_DATA, 0x80 | EPNUM_CDC_0_DATA, 64), // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC2, 4, 0x83, 8, EPNUM_CDC + 2, 0x80 | (EPNUM_CDC + 2), TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_DATA, 0x80 | EPNUM_CDC_1_DATA, 64), }; +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_DATA, 0x80 | EPNUM_CDC_0_DATA, 512), + + // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 4, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_DATA, 0x80 | EPNUM_CDC_1_DATA, 512), +}; +#endif + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif } //--------------------------------------------------------------------+ diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 9a4d71f24..447dc2644 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -114,18 +114,32 @@ enum #endif -uint8_t const desc_configuration[] = +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), }; +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor @@ -133,7 +147,13 @@ uint8_t const desc_configuration[] = uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif } //--------------------------------------------------------------------+ diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index a39b34c3c..935731c0b 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -86,10 +86,10 @@ enum #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_CDC 2 + #define EPNUM_CDC_0 2 #define EPNUM_VENDOR 5 #else - #define EPNUM_CDC 2 + #define EPNUM_CDC_0 2 #define EPNUM_VENDOR 3 #endif @@ -99,7 +99,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC_0, 0x80 | EPNUM_CDC_0, TUD_OPT_HIGH_SPEED ? 512 : 64), // Interface number, string index, EP Out & IN address, EP size TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR, 0x80 | EPNUM_VENDOR, TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/rules.mk b/examples/rules.mk index eeb548d08..dacb81363 100644 --- a/examples/rules.mk +++ b/examples/rules.mk @@ -131,8 +131,14 @@ size: $(BUILD)/$(BOARD)-firmware.elf @$(SIZE) $< -@echo '' +.PHONY: clean clean: - rm -rf $(BUILD) + $(RM) -rf $(BUILD) + +# Print out the value of a make variable. +# https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile +print-%: + @echo $* = $($*) # Flash binary using Jlink ifeq ($(OS),Windows_NT) diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 4d6e57878..89326f71d 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -61,8 +61,8 @@ typedef struct #endif // Endpoint Transfer buffer - CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_CDC_EPSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_CDC_EPSIZE]; + CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_CDC_EP_BUFSIZE]; + CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_CDC_EP_BUFSIZE]; }cdcd_interface_t; @@ -82,9 +82,9 @@ static void _prep_out_transaction (uint8_t itf) // Prepare for incoming data but only allow what we can store in the ring buffer. uint16_t max_read = tu_fifo_remaining(&p_cdc->rx_ff); - if ( max_read >= TU_ARRAY_SIZE(p_cdc->epout_buf) ) + if ( max_read >= sizeof(p_cdc->epout_buf) ) { - usbd_edpt_xfer(TUD_OPT_RHPORT, p_cdc->ep_out, p_cdc->epout_buf, TU_ARRAY_SIZE(p_cdc->epout_buf)); + usbd_edpt_xfer(TUD_OPT_RHPORT, p_cdc->ep_out, p_cdc->epout_buf, sizeof(p_cdc->epout_buf)); } } @@ -148,7 +148,7 @@ uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) #if 0 // TODO issue with circuitpython's REPL // flush if queue more than endpoint size - if ( tu_fifo_count(&_cdcd_itf[itf].tx_ff) >= CFG_TUD_CDC_EPSIZE ) + if ( tu_fifo_count(&_cdcd_itf[itf].tx_ff) >= CFG_TUD_CDC_EP_BUFSIZE ) { tud_cdc_n_write_flush(itf); } @@ -164,7 +164,7 @@ uint32_t tud_cdc_n_write_flush (uint8_t itf) // skip if previous transfer not complete yet TU_VERIFY( !usbd_edpt_busy(TUD_OPT_RHPORT, p_cdc->ep_in), 0 ); - uint16_t count = tu_fifo_read_n(&_cdcd_itf[itf].tx_ff, p_cdc->epin_buf, TU_ARRAY_SIZE(p_cdc->epin_buf)); + uint16_t count = tu_fifo_read_n(&_cdcd_itf[itf].tx_ff, p_cdc->epin_buf, sizeof(p_cdc->epin_buf)); if ( count ) { TU_VERIFY( tud_cdc_n_connected(itf), 0 ); // fifo is empty if not connected @@ -420,7 +420,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ { // There is no data left, a ZLP should be sent if // xferred_bytes is multiple of EP size and not zero - if ( xferred_bytes && (0 == (xferred_bytes % CFG_TUD_CDC_EPSIZE)) ) + if ( xferred_bytes && (0 == (xferred_bytes % CFG_TUD_CDC_EP_BUFSIZE)) ) { usbd_edpt_xfer(TUD_OPT_RHPORT, p_cdc->ep_in, NULL, 0); } diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index 897fd272b..39ccf6b76 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -34,8 +34,8 @@ //--------------------------------------------------------------------+ // Class Driver Configuration //--------------------------------------------------------------------+ -#ifndef CFG_TUD_CDC_EPSIZE -#define CFG_TUD_CDC_EPSIZE 64 +#ifndef CFG_TUD_CDC_EP_BUFSIZE +#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #endif #ifdef __cplusplus diff --git a/src/device/usbd.c b/src/device/usbd.c index b607f5939..f59b19427 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -294,6 +294,11 @@ void usbd_driver_print_control_complete_name(bool (*control_complete) (uint8_t, //--------------------------------------------------------------------+ // Application API //--------------------------------------------------------------------+ +tusb_speed_t tud_speed_get(void) +{ + return (tusb_speed_t) _usbd_dev.speed; +} + bool tud_mounted(void) { return _usbd_dev.configured; diff --git a/src/device/usbd.h b/src/device/usbd.h index e9b82747a..d9facf719 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -53,6 +53,9 @@ bool tud_task_event_ready(void); // Interrupt handler, name alias to DCD #define tud_int_handler dcd_int_handler +// Get current bus speed +tusb_speed_t tud_speed_get(void); + // Check if device is connected and configured bool tud_mounted(void); diff --git a/tools/build_all.py b/tools/build_all.py index 25cdc9778..af57cdd5c 100644 --- a/tools/build_all.py +++ b/tools/build_all.py @@ -38,7 +38,7 @@ all_boards.sort() def build_example(example, board): subprocess.run("make -C examples/device/{} BOARD={} clean".format(example, board), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - return subprocess.run("make -j 4 -C examples/device/{} BOARD={} all".format(example, board), shell=True, + return subprocess.run("make -j -C examples/device/{} BOARD={} all".format(example, board), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) def build_size(example, board): -- cgit v1.3.1 From ed065691eff1dc4029fd0ef3984ca25ba923d448 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Jul 2020 00:55:19 +0700 Subject: fix unintended changes to webusb example --- examples/device/webusb_serial/src/usb_descriptors.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'examples') diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 935731c0b..a39b34c3c 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -86,10 +86,10 @@ enum #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_CDC_0 2 + #define EPNUM_CDC 2 #define EPNUM_VENDOR 5 #else - #define EPNUM_CDC_0 2 + #define EPNUM_CDC 2 #define EPNUM_VENDOR 3 #endif @@ -99,7 +99,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC_0, 0x80 | EPNUM_CDC_0, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, 0x81, 8, EPNUM_CDC, 0x80 | EPNUM_CDC, TUD_OPT_HIGH_SPEED ? 512 : 64), // Interface number, string index, EP Out & IN address, EP size TUD_VENDOR_DESCRIPTOR(ITF_NUM_VENDOR, 5, EPNUM_VENDOR, 0x80 | EPNUM_VENDOR, TUD_OPT_HIGH_SPEED ? 512 : 64) -- cgit v1.3.1 From fea6fb73a1ef65afd848ec71d49d65cc87a9eec9 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Jul 2020 13:02:20 +0700 Subject: add fs & hs config for cdc_msc_freertos, midi_test, msc_dual_lun --- .../device/cdc_msc_freertos/src/usb_descriptors.c | 25 +++++++++++++++++++--- examples/device/midi_test/src/usb_descriptors.c | 23 +++++++++++++++++--- examples/device/msc_dual_lun/src/usb_descriptors.c | 23 +++++++++++++++++--- src/class/cdc/cdc_device.h | 2 +- src/class/midi/midi_device.c | 10 ++++----- src/class/midi/midi_device.h | 2 +- 6 files changed, 69 insertions(+), 16 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 62ab4f10f..e167ac05f 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -114,7 +114,7 @@ enum #endif -uint8_t const desc_configuration[] = +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), @@ -123,9 +123,22 @@ uint8_t const desc_configuration[] = TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), }; +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP notification address and size, EP data address (out, in) and size. + TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor @@ -133,7 +146,13 @@ uint8_t const desc_configuration[] = uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif } //--------------------------------------------------------------------+ diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 2867a205f..d529a0547 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -88,22 +88,39 @@ enum #define EPNUM_MIDI 0x01 #endif -uint8_t const desc_configuration[] = +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, TUD_OPT_HIGH_SPEED ? 512 : 64) + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 64) }; +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_fs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, 512) +}; +#endif + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif } //--------------------------------------------------------------------+ diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index d0c915b1d..a4e03e68c 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -96,22 +96,39 @@ enum #endif -uint8_t const desc_configuration[] = +uint8_t const desc_fs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64), }; +#if TUD_OPT_HIGH_SPEED +uint8_t const desc_hs_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512), +}; +#endif + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; + +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; +#else + return desc_fs_configuration; +#endif } //--------------------------------------------------------------------+ diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index 39ccf6b76..2d3312b21 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -35,7 +35,7 @@ // Class Driver Configuration //--------------------------------------------------------------------+ #ifndef CFG_TUD_CDC_EP_BUFSIZE -#define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) + #define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #endif #ifdef __cplusplus diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 14fb3e50d..d4ed21c78 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -67,8 +67,8 @@ typedef struct uint8_t read_target_length; // Endpoint Transfer buffer - CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_MIDI_EPSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_MIDI_EPSIZE]; + CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_MIDI_EP_BUFSIZE]; + CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_MIDI_EP_BUFSIZE]; } midid_interface_t; @@ -160,7 +160,7 @@ static bool maybe_transmit(midid_interface_t* midi, uint8_t itf_index) // skip if previous transfer not complete TU_VERIFY( !usbd_edpt_busy(TUD_OPT_RHPORT, midi->ep_in) ); - uint16_t count = tu_fifo_read_n(&midi->tx_ff, midi->epin_buf, CFG_TUD_MIDI_EPSIZE); + uint16_t count = tu_fifo_read_n(&midi->tx_ff, midi->epin_buf, CFG_TUD_MIDI_EP_BUFSIZE); if (count > 0) { TU_ASSERT( usbd_edpt_xfer(TUD_OPT_RHPORT, midi->ep_in, midi->epin_buf, count) ); @@ -359,7 +359,7 @@ uint16_t midid_open(uint8_t rhport, tusb_desc_interface_t const * desc_itf, uint } // Prepare for incoming data - if ( !usbd_edpt_xfer(rhport, p_midi->ep_out, p_midi->epout_buf, CFG_TUD_MIDI_EPSIZE) ) + if ( !usbd_edpt_xfer(rhport, p_midi->ep_out, p_midi->epout_buf, CFG_TUD_MIDI_EP_BUFSIZE) ) { TU_LOG1_FAILED(); TU_BREAKPOINT(); @@ -404,7 +404,7 @@ bool midid_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32 midi_rx_done_cb(p_midi, p_midi->epout_buf, xferred_bytes); // prepare for next - TU_ASSERT( usbd_edpt_xfer(rhport, p_midi->ep_out, p_midi->epout_buf, CFG_TUD_MIDI_EPSIZE), false ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_midi->ep_out, p_midi->epout_buf, CFG_TUD_MIDI_EP_BUFSIZE), false ); } else if ( ep_addr == p_midi->ep_in ) { maybe_transmit(p_midi, itf); } diff --git a/src/class/midi/midi_device.h b/src/class/midi/midi_device.h index bec0984f2..8f60d264a 100644 --- a/src/class/midi/midi_device.h +++ b/src/class/midi/midi_device.h @@ -37,7 +37,7 @@ // Class Driver Configuration //--------------------------------------------------------------------+ #ifndef CFG_TUD_MIDI_EPSIZE -#define CFG_TUD_MIDI_EPSIZE 64 + #define CFG_TUD_MIDI_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #endif #ifdef __cplusplus -- cgit v1.3.1 From 5ca748a68e01deec929e846b7263cf736bf891fb Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Jul 2020 15:34:16 +0700 Subject: rename CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE rename CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE --- examples/device/board_test/src/tusb_config.h | 5 +---- examples/device/cdc_msc/src/tusb_config.h | 6 +----- examples/device/cdc_msc_freertos/src/tusb_config.h | 6 +----- .../device/dynamic_configuration/src/tusb_config.h | 24 +++++++++------------- examples/device/hid_composite/src/tusb_config.h | 12 +++++------ .../device/hid_composite/src/usb_descriptors.c | 2 +- .../hid_composite_freertos/src/tusb_config.h | 12 +++++------ .../hid_composite_freertos/src/usb_descriptors.c | 2 +- .../device/hid_generic_inout/src/tusb_config.h | 12 +++++------ .../device/hid_generic_inout/src/usb_descriptors.c | 4 ++-- examples/device/midi_test/src/tusb_config.h | 4 ++-- examples/device/midi_test/src/usb_descriptors.c | 2 +- examples/device/msc_dual_lun/src/tusb_config.h | 12 +++++------ examples/device/usbtmc/src/tusb_config.h | 6 +++--- examples/device/webusb_serial/src/tusb_config.h | 4 ++-- src/class/hid/hid_device.c | 8 ++++---- src/class/hid/hid_device.h | 10 +++++++-- src/class/msc/msc_device.c | 4 ++-- src/class/msc/msc_device.h | 13 +++++++++--- test/test/support/tusb_config.h | 2 +- 20 files changed, 74 insertions(+), 76 deletions(-) (limited to 'examples') diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 0587d48e3..da33729e7 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -73,14 +73,11 @@ //------------- CLASS -------------// #define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 1 +#define CFG_TUD_MSC 0 #define CFG_TUD_HID 0 #define CFG_TUD_MIDI 0 #define CFG_TUD_VENDOR 0 -// MSC Buffer size of Device Mass storage -#define CFG_TUD_MSC_BUFSIZE 512 - #ifdef __cplusplus } #endif diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 13021d5d3..1370e61c5 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -97,7 +97,6 @@ #define CFG_TUD_CDC 1 #define CFG_TUD_MSC 1 #define CFG_TUD_HID 0 - #define CFG_TUD_MIDI 0 #define CFG_TUD_VENDOR 0 @@ -106,10 +105,7 @@ #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MSC Buffer size of Device Mass storage -#define CFG_TUD_MSC_BUFSIZE 512 - -// HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 16 +#define CFG_TUD_MSC_EP_BUFSIZE 512 #ifdef __cplusplus } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index f7e48f66e..712f328ea 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -99,7 +99,6 @@ #define CFG_TUD_CDC 1 #define CFG_TUD_MSC 1 #define CFG_TUD_HID 0 - #define CFG_TUD_MIDI 0 #define CFG_TUD_VENDOR 0 @@ -108,10 +107,7 @@ #define CFG_TUD_CDC_TX_BUFSIZE 64 // MSC Buffer size of Device Mass storage -#define CFG_TUD_MSC_BUFSIZE 512 - -// HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 16 +#define CFG_TUD_MSC_EP_BUFSIZE 512 #ifdef __cplusplus } diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index 0950305eb..2f8072f89 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -94,26 +94,22 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_CDC 1 -#define CFG_TUD_MSC 1 -#define CFG_TUD_HID 0 - -#define CFG_TUD_MIDI 1 -#define CFG_TUD_VENDOR 0 +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 1 +#define CFG_TUD_MIDI 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_VENDOR 0 // CDC FIFO size of TX and RX -#define CFG_TUD_CDC_RX_BUFSIZE 64 -#define CFG_TUD_CDC_TX_BUFSIZE 64 +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MIDI FIFO size of TX and RX -#define CFG_TUD_MIDI_RX_BUFSIZE 64 -#define CFG_TUD_MIDI_TX_BUFSIZE 64 +#define CFG_TUD_MIDI_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_MIDI_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MSC Buffer size of Device Mass storage -#define CFG_TUD_MSC_BUFSIZE 512 - -// HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 16 +#define CFG_TUD_MSC_EP_BUFSIZE 512 #ifdef __cplusplus } diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index abc243436..d8e6b73e8 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -94,14 +94,14 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_HID 1 -#define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 0 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_VENDOR 0 +#define CFG_TUD_HID 1 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 // HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 16 +#define CFG_TUD_HID_EP_BUFSIZE 16 #ifdef __cplusplus } diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index 02cbc17f6..fe46f7d69 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -105,7 +105,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_BUFSIZE, 10) + TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 677a9b2c6..4b0458ef0 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -94,14 +94,14 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_HID 1 -#define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 0 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_VENDOR 0 +#define CFG_TUD_HID 1 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 // HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 16 +#define CFG_TUD_HID_EP_BUFSIZE 16 #ifdef __cplusplus } diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 02cbc17f6..fe46f7d69 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -105,7 +105,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_BUFSIZE, 10) + TUD_HID_DESCRIPTOR(ITF_NUM_HID, 0, HID_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index 39eebbbeb..347cb06d6 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -94,14 +94,14 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 0 -#define CFG_TUD_HID 1 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_VENDOR 0 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 0 +#define CFG_TUD_HID 1 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 // HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 64 +#define CFG_TUD_HID_EP_BUFSIZE 64 #ifdef __cplusplus } diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index 5c769c9c9..290e12dfd 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -72,7 +72,7 @@ uint8_t const * tud_descriptor_device_cb(void) uint8_t const desc_hid_report[] = { - TUD_HID_REPORT_DESC_GENERIC_INOUT(CFG_TUD_HID_BUFSIZE) + TUD_HID_REPORT_DESC_GENERIC_INOUT(CFG_TUD_HID_EP_BUFSIZE) }; // Invoked when received GET HID REPORT DESCRIPTOR @@ -103,7 +103,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, protocol, report descriptor len, EP In & Out address, size & polling interval - TUD_HID_INOUT_DESCRIPTOR(ITF_NUM_HID, 0, HID_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, 0x80 | EPNUM_HID, CFG_TUD_HID_BUFSIZE, 10) + TUD_HID_INOUT_DESCRIPTOR(ITF_NUM_HID, 0, HID_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_HID, 0x80 | EPNUM_HID, CFG_TUD_HID_EP_BUFSIZE, 10) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index fd109ad32..d0c327e27 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -101,8 +101,8 @@ #define CFG_TUD_VENDOR 0 // MIDI FIFO size of TX and RX -#define CFG_TUD_MIDI_RX_BUFSIZE 64 -#define CFG_TUD_MIDI_TX_BUFSIZE 64 +#define CFG_TUD_MIDI_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_MIDI_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #ifdef __cplusplus } diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index d529a0547..3c556a156 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -98,7 +98,7 @@ uint8_t const desc_fs_configuration[] = }; #if TUD_OPT_HIGH_SPEED -uint8_t const desc_fs_configuration[] = +uint8_t const desc_hs_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index 1ee3faec4..e153a7967 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -94,14 +94,14 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_CDC 0 -#define CFG_TUD_MSC 1 -#define CFG_TUD_HID 0 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_VENDOR 0 +#define CFG_TUD_CDC 0 +#define CFG_TUD_MSC 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_MIDI 0 +#define CFG_TUD_VENDOR 0 // MSC Buffer size of Device Mass storage -#define CFG_TUD_MSC_BUFSIZE 512 +#define CFG_TUD_MSC_EP_BUFSIZE 512 #ifdef __cplusplus } diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h index 3fab286a9..603e67453 100644 --- a/examples/device/usbtmc/src/tusb_config.h +++ b/examples/device/usbtmc/src/tusb_config.h @@ -77,9 +77,9 @@ //------------- CLASS -------------// -#define CFG_TUD_USBTMC 1 -#define CFG_TUD_USBTMC_ENABLE_INT_EP 1 -#define CFG_TUD_USBTMC_ENABLE_488 1 +#define CFG_TUD_USBTMC 1 +#define CFG_TUD_USBTMC_ENABLE_INT_EP 1 +#define CFG_TUD_USBTMC_ENABLE_488 1 #ifdef __cplusplus } diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index a9b7a82d5..48c9ddad6 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -101,8 +101,8 @@ #define CFG_TUD_VENDOR 1 // CDC FIFO size of TX and RX -#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) -#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // Vendor FIFO size of TX and RX // If not configured vendor endpoints will not be buffered diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index 526394d4a..c46fc591a 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -48,8 +48,8 @@ typedef struct uint8_t idle_rate; // up to application to handle idle rate uint16_t report_desc_len; - CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_HID_BUFSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_HID_BUFSIZE]; + CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_HID_EP_BUFSIZE]; + CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_HID_EP_BUFSIZE]; tusb_hid_descriptor_hid_t const * hid_descriptor; } hidd_interface_t; @@ -86,7 +86,7 @@ bool tud_hid_report(uint8_t report_id, void const* report, uint8_t len) if (report_id) { - len = tu_min8(len, CFG_TUD_HID_BUFSIZE-1); + len = tu_min8(len, CFG_TUD_HID_EP_BUFSIZE-1); p_hid->epin_buf[0] = report_id; memcpy(p_hid->epin_buf+1, report, len); @@ -94,7 +94,7 @@ bool tud_hid_report(uint8_t report_id, void const* report, uint8_t len) }else { // If report id = 0, skip ID field - len = tu_min8(len, CFG_TUD_HID_BUFSIZE); + len = tu_min8(len, CFG_TUD_HID_EP_BUFSIZE); memcpy(p_hid->epin_buf, report, len); } diff --git a/src/class/hid/hid_device.h b/src/class/hid/hid_device.h index ad8c9ece4..ad26ab369 100644 --- a/src/class/hid/hid_device.h +++ b/src/class/hid/hid_device.h @@ -39,8 +39,14 @@ // Class Driver Default Configure & Validation //--------------------------------------------------------------------+ -#ifndef CFG_TUD_HID_BUFSIZE -#define CFG_TUD_HID_BUFSIZE 16 +#if !defined(CFG_TUD_HID_EP_BUFSIZE) & defined(CFG_TUD_HID_BUFSIZE) + // TODO warn user to use new name later on + // #warning CFG_TUD_HID_BUFSIZE is renamed to CFG_TUD_HID_EP_BUFSIZE + #define CFG_TUD_HID_EP_BUFSIZE CFG_TUD_HID_BUFSIZE +#endif + +#ifndef CFG_TUD_HID_EP_BUFSIZE + #define CFG_TUD_HID_EP_BUFSIZE 16 #endif //--------------------------------------------------------------------+ diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 3ddcd4e49..692fd2441 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -65,7 +65,7 @@ typedef struct }mscd_interface_t; CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static mscd_interface_t _mscd_itf; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t _mscd_buf[CFG_TUD_MSC_BUFSIZE]; +CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION @@ -564,7 +564,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t else { // READ10 & WRITE10 Can be executed with large bulk of data e.g write 8K bytes (several flash write) - // We break it into multiple smaller command whose data size is up to CFG_TUD_MSC_BUFSIZE + // We break it into multiple smaller command whose data size is up to CFG_TUD_MSC_EP_BUFSIZE if (SCSI_CMD_READ_10 == p_cbw->command[0]) { proc_read10_cmd(rhport, p_msc); diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 30ffd02e1..995491ec4 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -38,12 +38,19 @@ //--------------------------------------------------------------------+ // Class Driver Configuration //--------------------------------------------------------------------+ -TU_VERIFY_STATIC(CFG_TUD_MSC_BUFSIZE < UINT16_MAX, "Size is not correct"); -#ifndef CFG_TUD_MSC_BUFSIZE - #error CFG_TUD_MSC_BUFSIZE must be defined, value of a block size should work well, the more the better +#if !defined(CFG_TUD_MSC_EP_BUFSIZE) & defined(CFG_TUD_MSC_BUFSIZE) + // TODO warn user to use new name later on + // #warning CFG_TUD_MSC_BUFSIZE is renamed to CFG_TUD_MSC_EP_BUFSIZE + #define CFG_TUD_MSC_EP_BUFSIZE CFG_TUD_MSC_BUFSIZE #endif +#ifndef CFG_TUD_MSC_EP_BUFSIZE + #error CFG_TUD_MSC_EP_BUFSIZE must be defined, value of a block size should work well, the more the better +#endif + +TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct"); + /** \addtogroup ClassDriver_MSC * @{ * \defgroup MSC_Device Device diff --git a/test/test/support/tusb_config.h b/test/test/support/tusb_config.h index 76f975323..80ea0a1ea 100644 --- a/test/test/support/tusb_config.h +++ b/test/test/support/tusb_config.h @@ -94,7 +94,7 @@ //------------- HID -------------// // Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 16 +#define CFG_TUD_HID_EP_BUFSIZE 16 #ifdef __cplusplus } -- cgit v1.3.1 From 6ddee1b5cf4a7a5e1231cc0a75c89b3ce3dec2dd Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 18 Jul 2020 01:07:44 +0700 Subject: more update --- examples/device/cdc_msc_freertos/src/tusb_config.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 712f328ea..fe4845a08 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -103,8 +103,8 @@ #define CFG_TUD_VENDOR 0 // CDC FIFO size of TX and RX -#define CFG_TUD_CDC_RX_BUFSIZE 64 -#define CFG_TUD_CDC_TX_BUFSIZE 64 +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MSC Buffer size of Device Mass storage #define CFG_TUD_MSC_EP_BUFSIZE 512 -- cgit v1.3.1 From 8e1290e51e9d036959930dd6ea89a6ef8b517ac0 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 19 Jul 2020 13:13:21 +0700 Subject: minor clean up --- examples/device/cdc_dual_ports/src/usb_descriptors.c | 2 +- examples/device/cdc_msc/src/usb_descriptors.c | 2 +- examples/device/cdc_msc_freertos/src/usb_descriptors.c | 2 +- examples/device/midi_test/src/usb_descriptors.c | 2 +- examples/device/msc_dual_lun/src/usb_descriptors.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index a27a2cdbd..f23e42036 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -134,7 +134,7 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index) #if TUD_OPT_HIGH_SPEED // Although we are highspeed, host may be fullspeed. - return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; #else return desc_fs_configuration; #endif diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 447dc2644..d6b0d73cc 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -150,7 +150,7 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index) #if TUD_OPT_HIGH_SPEED // Although we are highspeed, host may be fullspeed. - return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; #else return desc_fs_configuration; #endif diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index e167ac05f..7ce24ee1e 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index) #if TUD_OPT_HIGH_SPEED // Although we are highspeed, host may be fullspeed. - return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; #else return desc_fs_configuration; #endif diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 3c556a156..4cde914ee 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -117,7 +117,7 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index) #if TUD_OPT_HIGH_SPEED // Although we are highspeed, host may be fullspeed. - return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; #else return desc_fs_configuration; #endif diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index a4e03e68c..ddc3194f7 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -125,7 +125,7 @@ uint8_t const * tud_descriptor_configuration_cb(uint8_t index) #if TUD_OPT_HIGH_SPEED // Although we are highspeed, host may be fullspeed. - return (tud_speed_get() == TUSB_SPEED_HIGH ) ? desc_hs_configuration : desc_fs_configuration; + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_hs_configuration : desc_fs_configuration; #else return desc_fs_configuration; #endif -- cgit v1.3.1 From 787c891702a9e6f4ddfe4f4c04457d7304fd21d5 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 21 Jul 2020 21:00:11 +0700 Subject: add note for MS OS 1.0 Descriptor at 0xEE --- examples/device/cdc_dual_ports/src/usb_descriptors.c | 4 +++- examples/device/cdc_msc/src/usb_descriptors.c | 4 +++- examples/device/cdc_msc_freertos/src/usb_descriptors.c | 4 +++- examples/device/dfu_rt/src/usb_descriptors.c | 4 +++- examples/device/dynamic_configuration/src/usb_descriptors.c | 4 +++- examples/device/hid_composite/src/usb_descriptors.c | 4 +++- examples/device/hid_composite_freertos/src/usb_descriptors.c | 4 +++- examples/device/hid_generic_inout/src/usb_descriptors.c | 4 +++- examples/device/midi_test/src/usb_descriptors.c | 4 +++- examples/device/msc_dual_lun/src/usb_descriptors.c | 4 +++- examples/device/net_lwip_webserver/src/usb_descriptors.c | 4 +++- examples/device/usbtmc/src/usb_descriptors.c | 4 +++- examples/device/webusb_serial/src/usb_descriptors.c | 4 +++- 13 files changed, 39 insertions(+), 13 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_dual_ports/src/usb_descriptors.c b/examples/device/cdc_dual_ports/src/usb_descriptors.c index f23e42036..8e19678e5 100644 --- a/examples/device/cdc_dual_ports/src/usb_descriptors.c +++ b/examples/device/cdc_dual_ports/src/usb_descriptors.c @@ -170,7 +170,8 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) chr_count = 1; }else { - // Convert ASCII string into UTF-16 + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; @@ -180,6 +181,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) chr_count = strlen(str); if ( chr_count > 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1; + // Convert ASCII string into UTF-16 for (unsigned int i=0; i 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i Date: Thu, 23 Jul 2020 01:39:15 +0700 Subject: fix samd21 race condition with setup packet reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1 --- examples/make.mk | 54 ++++++++++++++++------------------ hw/bsp/feather_m0_express/board.mk | 10 +++++-- hw/bsp/feather_m4_express/board.mk | 10 +++++-- hw/bsp/itsybitsy_m0/board.mk | 10 +++++-- hw/bsp/itsybitsy_m4/board.mk | 10 +++++-- hw/bsp/metro_m0_express/board.mk | 10 +++++-- hw/bsp/metro_m4_express/board.mk | 10 +++++-- src/portable/microchip/samd/dcd_samd.c | 2 ++ 8 files changed, 76 insertions(+), 40 deletions(-) (limited to 'examples') diff --git a/examples/make.mk b/examples/make.mk index 2ea50753b..b7917987e 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -46,31 +46,32 @@ SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/hw/bsp/$(BOARD)/*.c)) # Compiler Flags CFLAGS += \ - -fdata-sections \ - -ffunction-sections \ - -fsingle-precision-constant \ - -fno-strict-aliasing \ - -Wdouble-promotion \ - -Wstrict-prototypes \ - -Wall \ - -Wextra \ - -Werror \ - -Wfatal-errors \ - -Werror-implicit-function-declaration \ - -Wfloat-equal \ - -Wundef \ - -Wshadow \ - -Wwrite-strings \ - -Wsign-compare \ - -Wmissing-format-attribute \ - -Wunreachable-code \ - -Wcast-align - + -ggdb \ + -fdata-sections \ + -ffunction-sections \ + -fsingle-precision-constant \ + -fno-strict-aliasing \ + -Wdouble-promotion \ + -Wstrict-prototypes \ + -Wall \ + -Wextra \ + -Werror \ + -Wfatal-errors \ + -Werror-implicit-function-declaration \ + -Wfloat-equal \ + -Wundef \ + -Wshadow \ + -Wwrite-strings \ + -Wsign-compare \ + -Wmissing-format-attribute \ + -Wunreachable-code \ + -Wcast-align + # Debugging/Optimization ifeq ($(DEBUG), 1) - CFLAGS += -Og -ggdb + CFLAGS += -Og else - CFLAGS += -Os + CFLAGS += -Os endif # Log level is mapped to TUSB DEBUG option @@ -80,14 +81,11 @@ endif # Logger: default is uart, can be set to rtt or swo ifeq ($(LOGGER),rtt) - RTT_SRC = lib/SEGGER_RTT - - CFLAGS += -DLOGGER_RTT -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + RTT_SRC = lib/SEGGER_RTT + CFLAGS += -DLOGGER_RTT -DSEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL INC += $(TOP)/$(RTT_SRC)/RTT SRC_C += $(RTT_SRC)/RTT/SEGGER_RTT_printf.c SRC_C += $(RTT_SRC)/RTT/SEGGER_RTT.c - else ifeq ($(LOGGER),swo) - CFLAGS += -DLOGGER_SWO - + CFLAGS += -DLOGGER_SWO endif diff --git a/hw/bsp/feather_m0_express/board.mk b/hw/bsp/feather_m0_express/board.mk index d762c4eca..7b6891e03 100644 --- a/hw/bsp/feather_m0_express/board.mk +++ b/hw/bsp/feather_m0_express/board.mk @@ -41,5 +41,11 @@ FREERTOS_PORT = ARM_CM0 JLINK_DEVICE = ATSAMD21G18 JLINK_IF = swd -# flash using jlink -flash: flash-jlink +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash: $(BUILD)/$(BOARD)-firmware.bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/hw/bsp/feather_m4_express/board.mk b/hw/bsp/feather_m4_express/board.mk index 49c2d7f2f..34c98597c 100644 --- a/hw/bsp/feather_m4_express/board.mk +++ b/hw/bsp/feather_m4_express/board.mk @@ -44,5 +44,11 @@ FREERTOS_PORT = ARM_CM4F JLINK_DEVICE = ATSAMD51J19 JLINK_IF = swd -# flash using jlink -flash: flash-jlink +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash: $(BUILD)/$(BOARD)-firmware.bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R diff --git a/hw/bsp/itsybitsy_m0/board.mk b/hw/bsp/itsybitsy_m0/board.mk index d762c4eca..7b6891e03 100644 --- a/hw/bsp/itsybitsy_m0/board.mk +++ b/hw/bsp/itsybitsy_m0/board.mk @@ -41,5 +41,11 @@ FREERTOS_PORT = ARM_CM0 JLINK_DEVICE = ATSAMD21G18 JLINK_IF = swd -# flash using jlink -flash: flash-jlink +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash: $(BUILD)/$(BOARD)-firmware.bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/hw/bsp/itsybitsy_m4/board.mk b/hw/bsp/itsybitsy_m4/board.mk index 49c2d7f2f..34c98597c 100644 --- a/hw/bsp/itsybitsy_m4/board.mk +++ b/hw/bsp/itsybitsy_m4/board.mk @@ -44,5 +44,11 @@ FREERTOS_PORT = ARM_CM4F JLINK_DEVICE = ATSAMD51J19 JLINK_IF = swd -# flash using jlink -flash: flash-jlink +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash: $(BUILD)/$(BOARD)-firmware.bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R diff --git a/hw/bsp/metro_m0_express/board.mk b/hw/bsp/metro_m0_express/board.mk index d762c4eca..7b6891e03 100644 --- a/hw/bsp/metro_m0_express/board.mk +++ b/hw/bsp/metro_m0_express/board.mk @@ -41,5 +41,11 @@ FREERTOS_PORT = ARM_CM0 JLINK_DEVICE = ATSAMD21G18 JLINK_IF = swd -# flash using jlink -flash: flash-jlink +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash: $(BUILD)/$(BOARD)-firmware.bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x2000 -e -w $^ -R diff --git a/hw/bsp/metro_m4_express/board.mk b/hw/bsp/metro_m4_express/board.mk index 49c2d7f2f..34c98597c 100644 --- a/hw/bsp/metro_m4_express/board.mk +++ b/hw/bsp/metro_m4_express/board.mk @@ -44,5 +44,11 @@ FREERTOS_PORT = ARM_CM4F JLINK_DEVICE = ATSAMD51J19 JLINK_IF = swd -# flash using jlink -flash: flash-jlink +# flash using bossac at least version 1.8 +# can be found in arduino15/packages/arduino/tools/bossac/ +# Add it to your PATH or change BOSSAC variable to match your installation +BOSSAC = bossac + +flash: $(BUILD)/$(BOARD)-firmware.bin + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index 45bff2511..d0cc8560a 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -43,6 +43,8 @@ static inline void prepare_setup(void) { // Only make sure the EP0 OUT buffer is ready sram_registers[0][0].ADDR.reg = (uint32_t) _setup_packet; + sram_registers[0][0].PCKSIZE.bit.MULTI_PACKET_SIZE = sizeof(_setup_packet); + sram_registers[0][0].PCKSIZE.bit.BYTE_COUNT = 0; } // Setup the control endpoint 0. -- cgit v1.3.1 From 503c15217edad86426db4792364b88b35ec04d31 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Jul 2020 09:20:45 +0700 Subject: example to call tud_init() after freeRTOS kernel is started add note for usb init when using with RTOS --- examples/device/cdc_msc_freertos/src/main.c | 5 ++++- examples/device/hid_composite_freertos/src/main.c | 5 ++++- src/device/usbd.h | 2 ++ src/host/usbh.h | 3 +++ src/tusb.h | 2 ++ 5 files changed, 15 insertions(+), 2 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index a847f4915..1371b84c3 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -83,7 +83,6 @@ void cdc_task(void* params); int main(void) { board_init(); - tusb_init(); // soft timer for blinky blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); @@ -116,6 +115,10 @@ void usb_device_task(void* param) { (void) param; + // This should be called after scheduler/kernel is started. + // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. + tusb_init(); + // RTOS forever loop while (1) { diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 8a8570d60..de065ee64 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -79,7 +79,6 @@ void hid_task(void* params); int main(void) { board_init(); - tusb_init(); // soft timer for blinky blinky_tm = xTimerCreateStatic(NULL, pdMS_TO_TICKS(BLINK_NOT_MOUNTED), true, NULL, led_blinky_cb, &blinky_tmdef); @@ -112,6 +111,10 @@ void usb_device_task(void* param) { (void) param; + // This should be called after scheduler/kernel is started. + // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. + tusb_init(); + // RTOS forever loop while (1) { diff --git a/src/device/usbd.h b/src/device/usbd.h index d9facf719..098e94075 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -42,6 +42,8 @@ //--------------------------------------------------------------------+ // Init device stack +// Note: when using with RTOS, this should be called after scheduler/kernel is started. +// Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. bool tud_init (void); // Task function should be called in main/rtos loop diff --git a/src/host/usbh.h b/src/host/usbh.h index 42a2bd095..fe39a19f4 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -91,6 +91,9 @@ TU_ATTR_WEAK void tuh_umount_cb(uint8_t dev_addr); //--------------------------------------------------------------------+ // CLASS-USBH & INTERNAL API //--------------------------------------------------------------------+ + +// Note: when using with RTOS, this should be called after scheduler/kernel is started. +// Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. bool usbh_init(void); bool usbh_control_xfer (uint8_t dev_addr, tusb_control_request_t* request, uint8_t* data); diff --git a/src/tusb.h b/src/tusb.h index defbc54fb..c252a5789 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -109,6 +109,8 @@ * @{ */ // Initialize device/host stack +// Note: when using with RTOS, this should be called after scheduler/kernel is started. +// Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. bool tusb_init(void); // Check if stack is initialized -- cgit v1.3.1