From 78121a8d3f273420f8a2798364c2dd2fb9bb700f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 27 Sep 2025 14:58:08 +0200 Subject: Update UAC2 naming Signed-off-by: HiFiPhile --- examples/device/audio_4_channel_mic/src/main.c | 47 +++++++-------- .../device/audio_4_channel_mic_freertos/src/main.c | 44 +++++++------- examples/device/audio_test/src/main.c | 46 +++++++------- examples/device/audio_test_freertos/src/main.c | 46 +++++++------- examples/device/audio_test_multi_rate/src/main.c | 50 ++++++++-------- .../audio_test_multi_rate/src/usb_descriptors.h | 18 +++--- examples/device/cdc_uac2/src/uac2_app.c | 64 ++++++++++---------- examples/device/cdc_uac2/src/usb_descriptors.h | 28 ++++----- examples/device/uac2_headset/src/main.c | 70 +++++++++++----------- examples/device/uac2_headset/src/usb_descriptors.h | 28 ++++----- examples/device/uac2_speaker_fb/src/main.c | 64 ++++++++++---------- .../device/uac2_speaker_fb/src/usb_descriptors.h | 14 ++--- 12 files changed, 259 insertions(+), 260 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 3e0f03a20..de9e8a06a 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -66,8 +66,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX * CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000]; @@ -171,7 +171,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -191,7 +191,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -218,25 +218,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -297,13 +297,13 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; - ret.bmChannelConfig = (audio_channel_config_t) 0; + ret.bmChannelConfig = (audio20_channel_config_t) 0; ret.iChannelNames = 0; TU_LOG2(" Get terminal connector\r\n"); @@ -321,24 +321,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) - ret; + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; ret.subrange[0].bMin = -90;// -90 dB @@ -364,15 +363,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); // Buffered control transfer is needed for IN flow control to work return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Sample Freq. range\r\n"); return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -383,7 +382,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG2(" Get Sample Freq. valid\r\n"); return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 96eca0be9..4572bbb3c 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -102,8 +102,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX * CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000]; @@ -245,7 +245,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -265,7 +265,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -292,25 +292,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG1(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG1(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -368,9 +368,9 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; @@ -392,23 +392,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG1(" Get Mute of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Volume of channel: %u\r\n", channelNum); return tud_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) ret; + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; ret.subrange[0].bMin = -90;// -90 dB @@ -434,15 +434,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Sample Freq.\r\n"); // Buffered control transfer is needed for IN flow control to work return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Sample Freq. range\r\n"); return tud_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -453,7 +453,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG1(" Get Sample Freq. valid\r\n"); return tud_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 5b3beec24..875d0b7f0 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -63,8 +63,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data uint16_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / 2]; @@ -157,7 +157,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -177,7 +177,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -204,25 +204,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -283,13 +283,13 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; - ret.bmChannelConfig = (audio_channel_config_t) 0; + ret.bmChannelConfig = (audio20_channel_config_t) 0; ret.iChannelNames = 0; TU_LOG2(" Get terminal connector\r\n"); @@ -307,23 +307,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; @@ -350,14 +350,14 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Sample Freq. range\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -368,7 +368,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG2(" Get Sample Freq. valid\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index 1eab5dab8..cf2fb74d1 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -100,8 +100,8 @@ uint32_t sampFreq; uint8_t clkValid; // Range states -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state -audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state // Audio test data uint16_t test_buffer_audio[CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE / 1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / 2]; @@ -231,7 +231,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -251,7 +251,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -278,25 +278,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG1(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG1(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -354,13 +354,13 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == 1) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; - ret.bmChannelConfig = (audio_channel_config_t) 0; + ret.bmChannelConfig = (audio20_channel_config_t) 0; ret.iChannelNames = 0; TU_LOG1(" Get terminal connector\r\n"); @@ -378,23 +378,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == 2) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG1(" Get Mute of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Volume of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; @@ -421,14 +421,14 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == 4) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG1(" Get Sample Freq.\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG1(" Get Sample Freq. range\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampleFreqRng, sizeof(sampleFreqRng)); @@ -439,7 +439,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG1(" Get Sample Freq. valid\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 9d467991e..2e8a1dba5 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -80,7 +80,7 @@ static const uint8_t bytesPerSampleAltList[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, }; -audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state +audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state // Audio test data @@ -195,7 +195,7 @@ bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_req (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -215,7 +215,7 @@ bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_re (void) pBuff; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // Page 91 in UAC2 specification uint8_t channelNum = TU_U16_LOW(p_request->wValue); @@ -242,25 +242,25 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p (void) itf; // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); // If request is for our feature unit if (entityID == UAC2_ENTITY_FEATURE_UNIT) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Request uses format layout 1 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_1_t)); - mute[channelNum] = ((audio_control_cur_1_t *) pBuff)->bCur; + mute[channelNum] = ((audio20_control_cur_1_t *) pBuff)->bCur; TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); return true; - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: // Request uses format layout 2 - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; @@ -275,10 +275,10 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == UAC2_ENTITY_CLOCK) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: - TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_4_t)); + case AUDIO20_CS_CTRL_SAM_FREQ: + TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_4_t)); - sampFreq = (uint32_t) ((audio_control_cur_4_t *) pBuff)->bCur; + sampFreq = (uint32_t) ((audio20_control_cur_4_t *) pBuff)->bCur; TU_LOG2("Clock set current freq: %" PRIu32 "\r\n", sampFreq); @@ -342,9 +342,9 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Input terminal (Microphone input) if (entityID == UAC2_ENTITY_INPUT_TERMINAL) { switch (ctrlSel) { - case AUDIO_TE_CTRL_CONNECTOR: { + case AUDIO20_TE_CTRL_CONNECTOR: { // The terminal connector control only has a get request with only the CUR attribute. - audio_desc_channel_cluster_t ret; + audio20_desc_channel_cluster_t ret; // Those are dummy values for now ret.bNrChannels = 1; @@ -366,23 +366,23 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Feature unit if (entityID == UAC2_ENTITY_FEATURE_UNIT) { switch (ctrlSel) { - case AUDIO_FU_CTRL_MUTE: + case AUDIO20_FU_CTRL_MUTE: // Audio control mute cur parameter block consists of only one byte - we thus can send it right away // There does not exist a range parameter block for mute TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - case AUDIO_FU_CTRL_VOLUME: + case AUDIO20_FU_CTRL_VOLUME: switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &volume[channelNum], sizeof(volume[channelNum])); - case AUDIO_CS_REQ_RANGE: + case AUDIO20_CS_REQ_RANGE: TU_LOG2(" Get Volume range of channel: %u\r\n", channelNum); // Copy values - only for testing - better is version below - audio_control_range_2_n_t(1) + audio20_control_range_2_n_t(1) ret; ret.wNumSubRanges = 1; @@ -409,16 +409,16 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Clock Source unit if (entityID == UAC2_ENTITY_CLOCK) { switch (ctrlSel) { - case AUDIO_CS_CTRL_SAM_FREQ: + case AUDIO20_CS_CTRL_SAM_FREQ: // channelNum is always zero in this case switch (p_request->bRequest) { - case AUDIO_CS_REQ_CUR: + case AUDIO20_CS_REQ_CUR: TU_LOG2(" Get Sample Freq.\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &sampFreq, sizeof(sampFreq)); - case AUDIO_CS_REQ_RANGE: { + case AUDIO20_CS_REQ_RANGE: { TU_LOG2(" Get Sample Freq. range\r\n"); - audio_control_range_4_n_t(N_sampleRates) rangef = + audio20_control_range_4_n_t(N_sampleRates) rangef = { .wNumSubRanges = tu_htole16(N_sampleRates)}; TU_LOG1("Clock get %d freq ranges\r\n", N_sampleRates); @@ -437,7 +437,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } break; - case AUDIO_CS_CTRL_CLK_VALID: + case AUDIO20_CS_CTRL_CLK_VALID: // Only cur attribute exists for this request TU_LOG2(" Get Sample Freq. valid\r\n"); return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &clkValid, sizeof(clkValid)); diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index 8381e31f5..277b22d7b 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -64,15 +64,15 @@ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO_CTRL_RW << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO_CTRL_R << AUDIO_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -80,23 +80,23 @@ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index a1a0dd73d..cb7b716e8 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -80,22 +80,22 @@ void audio_task(void) { } // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) +static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { - if (request->bRequest == AUDIO_CS_REQ_CUR) + if (request->bRequest == AUDIO20_CS_REQ_CUR) { TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); - audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; + audio20_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); } - else if (request->bRequest == AUDIO_CS_REQ_RANGE) + else if (request->bRequest == AUDIO20_CS_REQ_RANGE) { - audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = + audio20_control_range_4_n_t(N_SAMPLE_RATES) rangef = { .wNumSubRanges = tu_htole16(N_SAMPLE_RATES) }; @@ -111,10 +111,10 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &rangef, sizeof(rangef)); } } - else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID && - request->bRequest == AUDIO_CS_REQ_CUR) + else if (request->bControlSelector == AUDIO20_CS_CTRL_CLK_VALID && + request->bRequest == AUDIO20_CS_REQ_CUR) { - audio_control_cur_1_t cur_valid = { .bCur = 1 }; + audio20_control_cur_1_t cur_valid = { .bCur = 1 }; TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_valid, sizeof(cur_valid)); } @@ -124,18 +124,18 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) +static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void)rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_4_t)); - current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; + current_sample_rate = (uint32_t) ((audio20_control_cur_4_t const *)buf)->bCur; TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); @@ -150,21 +150,21 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) +static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { - audio_control_cur_1_t mute1 = { .bCur = mute[request->bChannelNumber] }; + audio20_control_cur_1_t mute1 = { .bCur = mute[request->bChannelNumber] }; TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &mute1, sizeof(mute1)); } - else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) + else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { - if (request->bRequest == AUDIO_CS_REQ_RANGE) + if (request->bRequest == AUDIO20_CS_REQ_RANGE) { - audio_control_range_2_n_t(1) range_vol = { + audio20_control_range_2_n_t(1) range_vol = { .wNumSubRanges = tu_htole16(1), .subrange[0] = { .bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256) } }; @@ -172,9 +172,9 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &range_vol, sizeof(range_vol)); } - else if (request->bRequest == AUDIO_CS_REQ_CUR) + else if (request->bRequest == AUDIO20_CS_REQ_CUR) { - audio_control_cur_2_t cur_vol = { .bCur = tu_htole16(volume[request->bChannelNumber]) }; + audio20_control_cur_2_t cur_vol = { .bCur = tu_htole16(volume[request->bChannelNumber]) }; TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &cur_vol, sizeof(cur_vol)); } @@ -186,28 +186,28 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) +static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void)rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE) + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t)); + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_1_t)); - mute[request->bChannelNumber] = ((audio_control_cur_1_t const *)buf)->bCur; + mute[request->bChannelNumber] = ((audio20_control_cur_1_t const *)buf)->bCur; TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); return true; } - else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) + else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t)); + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_2_t)); - volume[request->bChannelNumber] = ((audio_control_cur_2_t const *)buf)->bCur; + volume[request->bChannelNumber] = ((audio20_control_cur_2_t const *)buf)->bCur; TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); @@ -228,7 +228,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio_control_request_t const *request = (audio_control_request_t const *)p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) return tud_audio_clock_get_request(rhport, request); @@ -245,7 +245,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio_control_request_t const *request = (audio_control_request_t const *)p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) return tud_audio_feature_unit_set_request(rhport, request, buf); diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index 736feeefe..efffbc0bb 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -93,19 +93,19 @@ enum /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ @@ -113,23 +113,23 @@ enum /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ @@ -137,22 +137,22 @@ enum /* Interface 2, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 102a6eef1..602225df5 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -142,17 +142,17 @@ void tud_resume_cb(void) { } // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - if (request->bRequest == AUDIO_CS_REQ_CUR) { + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + if (request->bRequest == AUDIO20_CS_REQ_CUR) { TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); - audio_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; + audio20_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &curf, sizeof(curf)); - } else if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = + } else if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_4_n_t(N_SAMPLE_RATES) rangef = { .wNumSubRanges = tu_htole16(N_SAMPLE_RATES)}; TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES); @@ -165,9 +165,9 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &rangef, sizeof(rangef)); } - } else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID && - request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t cur_valid = {.bCur = 1}; + } else if (request->bControlSelector == AUDIO20_CS_CTRL_CLK_VALID && + request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t cur_valid = {.bCur = 1}; TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_valid, sizeof(cur_valid)); } @@ -177,16 +177,16 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_4_t)); - current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *) buf)->bCur; + current_sample_rate = (uint32_t) ((audio20_control_cur_4_t const *) buf)->bCur; TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); @@ -199,23 +199,23 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &mute1, sizeof(mute1)); - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_2_n_t(1) range_vol = { + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_2_n_t(1) range_vol = { .wNumSubRanges = tu_htole16(1), .subrange[0] = {.bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256)}}; TU_LOG1("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber, range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &range_vol, sizeof(range_vol)); - } else if (request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; + } else if (request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_vol, sizeof(cur_vol)); } @@ -227,24 +227,24 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t)); + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_1_t)); - mute[request->bChannelNumber] = ((audio_control_cur_1_t const *) buf)->bCur; + mute[request->bChannelNumber] = ((audio20_control_cur_1_t const *) buf)->bCur; TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); return true; - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t)); + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_2_t)); - volume[request->bChannelNumber] = ((audio_control_cur_2_t const *) buf)->bCur; + volume[request->bChannelNumber] = ((audio20_control_cur_2_t const *) buf)->bCur; TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); @@ -262,7 +262,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) return tud_audio_clock_get_request(rhport, request); @@ -277,7 +277,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) return tud_audio_feature_unit_set_request(rhport, request, buf); @@ -387,11 +387,11 @@ void audio_control_task(void) { } // 6.1 Interrupt Data Message - const audio_interrupt_data_t data = { + const audio20_interrupt_data_t data = { .bInfo = 0, // Class-specific interrupt, originated from an interface - .bAttribute = AUDIO_CS_REQ_CUR, // Caused by current settings + .bAttribute = AUDIO20_CS_REQ_CUR, // Caused by current settings .wValue_cn_or_mcn = 0, // CH0: master volume - .wValue_cs = AUDIO_FU_CTRL_VOLUME, // Volume change + .wValue_cs = AUDIO20_FU_CTRL_VOLUME, // Volume change .wIndex_ep_or_int = 0, // From the interface itself .wIndex_entity_id = UAC2_ENTITY_SPK_FEATURE_UNIT,// From feature unit }; diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index da0da83e8..4138b5654 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -91,19 +91,19 @@ enum /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */\ TUD_AUDIO_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -113,23 +113,23 @@ enum /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ @@ -137,22 +137,22 @@ enum /* Interface 2, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index ed9e7716d..2e525ef28 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -154,17 +154,17 @@ void tud_resume_cb(void) { //--------------------------------------------------------------------+ // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - if (request->bRequest == AUDIO_CS_REQ_CUR) { + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + if (request->bRequest == AUDIO20_CS_REQ_CUR) { TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); - audio_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; + audio20_control_cur_4_t curf = {(int32_t) tu_htole32(current_sample_rate)}; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &curf, sizeof(curf)); - } else if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_4_n_t(N_SAMPLE_RATES) rangef = + } else if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_4_n_t(N_SAMPLE_RATES) rangef = { .wNumSubRanges = tu_htole16(N_SAMPLE_RATES)}; TU_LOG1("Clock get %d freq ranges\r\n", N_SAMPLE_RATES); @@ -177,9 +177,9 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &rangef, sizeof(rangef)); } - } else if (request->bControlSelector == AUDIO_CS_CTRL_CLK_VALID && - request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t cur_valid = {.bCur = 1}; + } else if (request->bControlSelector == AUDIO20_CS_CTRL_CLK_VALID && + request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t cur_valid = {.bCur = 1}; TU_LOG1("Clock get is valid %u\r\n", cur_valid.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_valid, sizeof(cur_valid)); } @@ -189,16 +189,16 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_CS_CTRL_SAM_FREQ) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_4_t)); + if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_4_t)); - current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *) buf)->bCur; + current_sample_rate = (uint32_t) ((audio20_control_cur_4_t const *) buf)->bCur; TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); @@ -211,23 +211,23 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_request_t const *request) { +static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE && request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_1_t mute1 = {.bCur = mute[request->bChannelNumber]}; TU_LOG1("Get channel %u mute %d\r\n", request->bChannelNumber, mute1.bCur); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &mute1, sizeof(mute1)); - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - if (request->bRequest == AUDIO_CS_REQ_RANGE) { - audio_control_range_2_n_t(1) range_vol = { + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + if (request->bRequest == AUDIO20_CS_REQ_RANGE) { + audio20_control_range_2_n_t(1) range_vol = { .wNumSubRanges = tu_htole16(1), .subrange[0] = {.bMin = tu_htole16(-VOLUME_CTRL_50_DB), tu_htole16(VOLUME_CTRL_0_DB), tu_htole16(256)}}; TU_LOG1("Get channel %u volume range (%d, %d, %u) dB\r\n", request->bChannelNumber, range_vol.subrange[0].bMin / 256, range_vol.subrange[0].bMax / 256, range_vol.subrange[0].bRes / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &range_vol, sizeof(range_vol)); - } else if (request->bRequest == AUDIO_CS_REQ_CUR) { - audio_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; + } else if (request->bRequest == AUDIO20_CS_REQ_CUR) { + audio20_control_cur_2_t cur_vol = {.bCur = tu_htole16(volume[request->bChannelNumber])}; TU_LOG1("Get channel %u volume %d dB\r\n", request->bChannelNumber, cur_vol.bCur / 256); return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *) request, &cur_vol, sizeof(cur_vol)); } @@ -239,24 +239,24 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio_control_req } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); - TU_VERIFY(request->bRequest == AUDIO_CS_REQ_CUR); + TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); - if (request->bControlSelector == AUDIO_FU_CTRL_MUTE) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_1_t)); + if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_1_t)); - mute[request->bChannelNumber] = ((audio_control_cur_1_t const *) buf)->bCur; + mute[request->bChannelNumber] = ((audio20_control_cur_1_t const *) buf)->bCur; TU_LOG1("Set channel %d Mute: %d\r\n", request->bChannelNumber, mute[request->bChannelNumber]); return true; - } else if (request->bControlSelector == AUDIO_FU_CTRL_VOLUME) { - TU_VERIFY(request->wLength == sizeof(audio_control_cur_2_t)); + } else if (request->bControlSelector == AUDIO20_FU_CTRL_VOLUME) { + TU_VERIFY(request->wLength == sizeof(audio20_control_cur_2_t)); - volume[request->bChannelNumber] = ((audio_control_cur_2_t const *) buf)->bCur; + volume[request->bChannelNumber] = ((audio20_control_cur_2_t const *) buf)->bCur; TU_LOG1("Set channel %d volume: %d dB\r\n", request->bChannelNumber, volume[request->bChannelNumber] / 256); @@ -270,7 +270,7 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio_control_req // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) return tud_audio_clock_get_request(rhport, request); @@ -285,7 +285,7 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio_control_request_t const *request = (audio_control_request_t const *) p_request; + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_FEATURE_UNIT) return tud_audio_feature_unit_set_request(rhport, request, buf); diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index 9511bf797..005aebeef 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -53,15 +53,15 @@ /* Standard AC Interface Descriptor(4.7.1) */\ TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, /*_ctrl*/ AUDIO_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO_CTRL_RW << AUDIO_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO_CTRL_R << AUDIO_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO_CTRL_RW << AUDIO_FEATURE_UNIT_CTRL_VOLUME_POS,/*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS,/*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ @@ -69,13 +69,13 @@ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO_CTRL_NONE, /*_formattype*/ AUDIO_FORMAT_TYPE_I, /*_formats*/ AUDIO_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 4 : 1)\ -- cgit v1.3.1 From 9637a2006bdfa77911cd274f0b9cff7de7ae54e9 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 28 Sep 2025 17:17:10 +0200 Subject: More descriptors working Signed-off-by: HiFiPhile --- .../device/audio_4_channel_mic/src/tusb_config.h | 2 +- .../audio_4_channel_mic/src/usb_descriptors.c | 4 +- .../audio_4_channel_mic_freertos/src/tusb_config.h | 2 +- .../src/usb_descriptors.c | 4 +- examples/device/audio_test/src/tusb_config.h | 2 +- examples/device/audio_test/src/usb_descriptors.c | 4 +- .../device/audio_test_freertos/src/tusb_config.h | 2 +- .../audio_test_freertos/src/usb_descriptors.c | 4 +- .../device/audio_test_multi_rate/src/tusb_config.h | 2 +- .../audio_test_multi_rate/src/usb_descriptors.c | 4 +- .../audio_test_multi_rate/src/usb_descriptors.h | 74 +- examples/device/cdc_uac2/src/usb_descriptors.h | 124 +- examples/device/uac2_headset/src/main.c | 8 +- examples/device/uac2_headset/src/usb_descriptors.h | 128 +- examples/device/uac2_speaker_fb/src/tusb_config.h | 2 +- .../device/uac2_speaker_fb/src/usb_descriptors.c | 8 +- .../device/uac2_speaker_fb/src/usb_descriptors.h | 111 +- src/class/audio/audio.h | 1837 ++++++++++---------- src/class/audio/audio_device.c | 4 +- src/class/midi/midi_host.c | 4 +- src/common/tusb_common.h | 7 + src/common/tusb_compiler.h | 12 + src/device/usbd.h | 397 +++-- 23 files changed, 1439 insertions(+), 1307 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 0ee3ba2d0..718486941 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -105,7 +105,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 728a5f9ce..4caa4343b 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_FOUR_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN) #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index d973be2af..7a9a40c49 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -111,7 +111,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_FOUR_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index 728a5f9ce..4caa4343b 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_FOUR_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN) #if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_FOUR_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 10bf53809..8a63cc521 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -108,7 +108,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 9864377f6..af9b7f1dc 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index c9dc50082..21b6a6f76 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -114,7 +114,7 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index 9864377f6..af9b7f1dc 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -80,7 +80,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -101,7 +101,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) + TUD_AUDIO20_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, /*_nBitsUsedPerSample*/ CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX*8, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO_EP_SZ_IN) }; // Invoked when received GET CONFIGURATION DESCRIPTOR diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index b48c0a0be..e92d20c49 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -122,7 +122,7 @@ extern "C" { // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index f50e70a25..afdf95b79 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -82,7 +82,7 @@ enum ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number @@ -103,7 +103,7 @@ uint8_t const desc_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) + TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) }; TU_VERIFY_STATIC(sizeof(desc_configuration) == CONFIG_TOTAL_LEN, "Incorrect size"); diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index 277b22d7b..adf3305d2 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -35,68 +35,68 @@ #define UAC2_ENTITY_FEATURE_UNIT 0x02 -#define TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN\ +#define TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1)\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 1, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 1, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) -#define TUD_AUDIO_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(_itfnum, _stridx, _epin) \ +#define TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(_itfnum, _stridx, _epin) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS | AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS, /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_FEATURE_UNIT, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index efffbc0bb..afb74d5b5 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -49,110 +49,110 @@ enum ITF_NUM_TOTAL }; -#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ +#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 1, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 2, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) #define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ 3, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ 3, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS)),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 602225df5..6cfab946b 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -387,14 +387,14 @@ void audio_control_task(void) { } // 6.1 Interrupt Data Message - const audio20_interrupt_data_t data = { + const audio_interrupt_data_t data = {.v2 = { .bInfo = 0, // Class-specific interrupt, originated from an interface - .bAttribute = AUDIO20_CS_REQ_CUR, // Caused by current settings + .bAttribute = AUDIO20_CS_REQ_CUR, // Caused by current settings .wValue_cn_or_mcn = 0, // CH0: master volume - .wValue_cs = AUDIO20_FU_CTRL_VOLUME, // Volume change + .wValue_cs = AUDIO20_FU_CTRL_VOLUME, // Volume change .wIndex_ep_or_int = 0, // From the interface itself .wIndex_entity_id = UAC2_ENTITY_SPK_FEATURE_UNIT,// From feature unit - }; + }}; tud_audio_int_write(&data); } diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 4138b5654..68d15a857 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -46,113 +46,113 @@ enum ITF_NUM_TOTAL }; -#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_STD_AC_INT_EP_LEN\ +#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_STD_AC_INT_EP_LEN\ /* Interface 1, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 1, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 1, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 0 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ /* Interface 2, Alternate 1 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ /* Interface 2, Alternate 2 */\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) #define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin, _epint) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_HEADSET, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS)),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */\ - TUD_AUDIO_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ + TUD_AUDIO20_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) #endif diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index 18ab2ff96..284feff55 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -128,7 +128,7 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN +#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN // Can be enabled with Full-Speed device on OSX, which forces feedback EP size to 3, in this case CFG_QUIRK_OS_GUESSING can be disabled #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index ee1b92225..9e12c88b4 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -113,9 +113,9 @@ uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) //--------------------------------------------------------------------+ #if CFG_AUDIO_DEBUG - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) + #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) #else - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN) + #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN) #endif #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX @@ -150,7 +150,7 @@ uint8_t const desc_configuration_default[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 4), + TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 4), #if CFG_AUDIO_DEBUG // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval @@ -166,7 +166,7 @@ uint8_t const desc_configuration_osx_fs[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 3), + TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 3), #if CFG_AUDIO_DEBUG // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index 005aebeef..f71411dcf 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -26,57 +26,108 @@ #ifndef _USB_DESCRIPTORS_H_ #define _USB_DESCRIPTORS_H_ -// Defined in TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR +// Defined in TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR #define UAC2_ENTITY_CLOCK 0x04 #define UAC2_ENTITY_INPUT_TERMINAL 0x01 #define UAC2_ENTITY_FEATURE_UNIT 0x02 #define UAC2_ENTITY_OUTPUT_TERMINAL 0x03 -#define TUD_AUDIO_SPEAKER_STEREO_FB_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN) +#define TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN) -#define TUD_AUDIO_SPEAKER_STEREO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ +#define TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(2), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK, /*_ctrl*/ (AUDIO20_CTRL_RW << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS,/*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 4 : 1)\ + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 4 : 1) + +//--------------------------------------------------------------------+ +// UAC1 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ + +// Defined in TUD_AUDIO10_SPEAKER_STEREO_FB_DESCRIPTOR +#define UAC1_ENTITY_INPUT_TERMINAL 0x01 +#define UAC1_ENTITY_FEATURE_UNIT 0x02 +#define UAC1_ENTITY_OUTPUT_TERMINAL 0x03 + +#define TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(_nfreqs) (\ + + TUD_AUDIO_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP_LEN) + +#define TUD_AUDIO10_SPEAKER_STEREO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, ...) \ + /* Standard AC Interface Descriptor(4.3.1) */\ + TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ (TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)), /*_itf*/ ((_itfnum)+1)),\ + /* Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_nchannels*/ 0x02, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_LEFT_FRONT | AUDIO10_CHANNEL_CONFIG_RIGHT_FRONT, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x00, /*_srcid*/ 0x02, /*_stridx*/ 0x00),\ + /* Feature Unit Descriptor(4.3.2.5) */\ + TUD_AUDIO10_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlmaster*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch1*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch2*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME)),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 1 - alternate interface for data streaming */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x02, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqs*/ __VA_ARGS__),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_sync_ep*/ _epfb),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + /* Standard AS Isochronous Synch Endpoint Descriptor (4.6.2.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 4) #endif diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index 7c4c85306..ecc7b9427 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -44,425 +44,472 @@ extern "C" { //--------------------------------------------------------------------+ /// A.2 - Audio Function Subclass Codes -typedef enum -{ +typedef enum { AUDIO_FUNCTION_SUBCLASS_UNDEFINED = 0x00, } audio_function_subclass_type_t; /// A.3 - Audio Function Protocol Codes -typedef enum -{ - AUDIO_FUNC_PROTOCOL_CODE_UNDEF = 0x00, - AUDIO_FUNC_PROTOCOL_CODE_V1 = 0x00, ///< Version 1.0 - same as undefined for backward compatibility - AUDIO_FUNC_PROTOCOL_CODE_V2 = 0x20, ///< Version 2.0 +typedef enum { + AUDIO_FUNC_PROTOCOL_CODE_UNDEF = 0x00, + AUDIO_FUNC_PROTOCOL_CODE_V1 = 0x00,///< Version 1.0 - same as undefined for backward compatibility + AUDIO_FUNC_PROTOCOL_CODE_V2 = 0x20,///< Version 2.0 } audio_function_protocol_code_t; /// A.5 - Audio Interface Subclass Codes -typedef enum -{ +typedef enum { AUDIO_SUBCLASS_UNDEFINED = 0x00, - AUDIO_SUBCLASS_CONTROL , ///< Audio Control - AUDIO_SUBCLASS_STREAMING , ///< Audio Streaming - AUDIO_SUBCLASS_MIDI_STREAMING , ///< MIDI Streaming + AUDIO_SUBCLASS_CONTROL, ///< Audio Control + AUDIO_SUBCLASS_STREAMING, ///< Audio Streaming + AUDIO_SUBCLASS_MIDI_STREAMING,///< MIDI Streaming } audio_subclass_type_t; /// A.6 - Audio Interface Protocol Codes -typedef enum -{ - AUDIO_INT_PROTOCOL_CODE_UNDEF = 0x00, - AUDIO_INT_PROTOCOL_CODE_V1 = 0x00, ///< Version 1.0 - same as undefined for backward compatibility - AUDIO_INT_PROTOCOL_CODE_V2 = 0x20, ///< Version 2.0 +typedef enum { + AUDIO_INT_PROTOCOL_CODE_UNDEF = 0x00, + AUDIO_INT_PROTOCOL_CODE_V1 = 0x00,///< Version 1.0 - same as undefined for backward compatibility + AUDIO_INT_PROTOCOL_CODE_V2 = 0x20,///< Version 2.0 } audio_interface_protocol_code_t; +/// Terminal Types + +/// 2.1 - Audio Class-Terminal Types +typedef enum { + AUDIO_TERM_TYPE_USB_UNDEFINED = 0x0100, + AUDIO_TERM_TYPE_USB_STREAMING = 0x0101, + AUDIO_TERM_TYPE_USB_VENDOR_SPEC = 0x01FF, +} audio_terminal_type_t; + +/// 2.2 - Audio Class-Input Terminal Types +typedef enum { + AUDIO_TERM_TYPE_IN_UNDEFINED = 0x0200, + AUDIO_TERM_TYPE_IN_GENERIC_MIC = 0x0201, + AUDIO_TERM_TYPE_IN_DESKTOP_MIC = 0x0202, + AUDIO_TERM_TYPE_IN_PERSONAL_MIC = 0x0203, + AUDIO_TERM_TYPE_IN_OMNI_MIC = 0x0204, + AUDIO_TERM_TYPE_IN_ARRAY_MIC = 0x0205, + AUDIO_TERM_TYPE_IN_PROC_ARRAY_MIC = 0x0206, +} audio_terminal_input_type_t; + +/// 2.3 - Audio Class-Output Terminal Types +typedef enum { + AUDIO_TERM_TYPE_OUT_UNDEFINED = 0x0300, + AUDIO_TERM_TYPE_OUT_GENERIC_SPEAKER = 0x0301, + AUDIO_TERM_TYPE_OUT_HEADPHONES = 0x0302, + AUDIO_TERM_TYPE_OUT_HEAD_MNT_DISP_AUIDO = 0x0303, + AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER = 0x0304, + AUDIO_TERM_TYPE_OUT_ROOM_SPEAKER = 0x0305, + AUDIO_TERM_TYPE_OUT_COMMUNICATION_SPEAKER = 0x0306, + AUDIO_TERM_TYPE_OUT_LOW_FRQ_EFFECTS_SPEAKER = 0x0307, +} audio_terminal_output_type_t; + +/// Rest is yet to be implemented + //--------------------------------------------------------------------+ // USB AUDIO CLASS 1.0 (UAC1) DEFINITIONS //--------------------------------------------------------------------+ -/// A.4 - Audio Class-Specific AC Interface Descriptor Subtypes UAC1 -typedef enum -{ +/// A.5 - Audio Class-Specific AC Interface Descriptor Subtypes UAC1 +typedef enum { AUDIO10_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, - AUDIO10_CS_AC_INTERFACE_HEADER = 0x01, - AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, - AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, - AUDIO10_CS_AC_INTERFACE_MIXER_UNIT = 0x04, - AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, - AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, - AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT = 0x07, - AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT = 0x08, + AUDIO10_CS_AC_INTERFACE_HEADER = 0x01, + AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, + AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, + AUDIO10_CS_AC_INTERFACE_MIXER_UNIT = 0x04, + AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, + AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, + AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT = 0x07, + AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT = 0x08, } audio10_cs_ac_interface_subtype_t; -/// A.5 - Audio Class-Specific AS Interface Descriptor Subtypes UAC1 -typedef enum -{ +/// A.6 - Audio Class-Specific AS Interface Descriptor Subtypes UAC1 +typedef enum { AUDIO10_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, - AUDIO10_CS_AS_INTERFACE_AS_GENERAL = 0x01, - AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, + AUDIO10_CS_AS_INTERFACE_AS_GENERAL = 0x01, + AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, } audio10_cs_as_interface_subtype_t; -/// A.6 - Audio Class-Specific EP Descriptor Subtypes UAC1 -typedef enum -{ - AUDIO10_CS_EP_SUBTYPE_UNDEF = 0x00, - AUDIO10_CS_EP_SUBTYPE_GENERAL = 0x01, +/// A.8 - Audio Class-Specific EP Descriptor Subtypes UAC1 +typedef enum { + AUDIO10_CS_EP_SUBTYPE_UNDEF = 0x00, + AUDIO10_CS_EP_SUBTYPE_GENERAL = 0x01, } audio10_cs_ep_subtype_t; -/// A.7 - Audio Class-Specific Request Codes UAC1 -typedef enum -{ - AUDIO10_CS_REQ_UNDEF = 0x00, - AUDIO10_CS_REQ_SET_CUR = 0x01, - AUDIO10_CS_REQ_GET_CUR = 0x81, - AUDIO10_CS_REQ_SET_MIN = 0x02, - AUDIO10_CS_REQ_GET_MIN = 0x82, - AUDIO10_CS_REQ_SET_MAX = 0x03, - AUDIO10_CS_REQ_GET_MAX = 0x83, - AUDIO10_CS_REQ_SET_RES = 0x04, - AUDIO10_CS_REQ_GET_RES = 0x84, - AUDIO10_CS_REQ_SET_MEM = 0x05, - AUDIO10_CS_REQ_GET_MEM = 0x85, - AUDIO10_CS_REQ_GET_STAT = 0xFF, +/// A.9 - Audio Class-Specific Request Codes UAC1 +typedef enum { + AUDIO10_CS_REQ_UNDEF = 0x00, + AUDIO10_CS_REQ_SET_CUR = 0x01, + AUDIO10_CS_REQ_GET_CUR = 0x81, + AUDIO10_CS_REQ_SET_MIN = 0x02, + AUDIO10_CS_REQ_GET_MIN = 0x82, + AUDIO10_CS_REQ_SET_MAX = 0x03, + AUDIO10_CS_REQ_GET_MAX = 0x83, + AUDIO10_CS_REQ_SET_RES = 0x04, + AUDIO10_CS_REQ_GET_RES = 0x84, + AUDIO10_CS_REQ_SET_MEM = 0x05, + AUDIO10_CS_REQ_GET_MEM = 0x85, + AUDIO10_CS_REQ_GET_STAT = 0xFF, } audio10_cs_req_t; -/// A.9.1 - Terminal Control Selectors UAC1 -typedef enum -{ - AUDIO10_TE_CTRL_UNDEF = 0x00, - AUDIO10_TE_CTRL_COPY_PROTECT = 0x01, +/// A.10.1 - Terminal Control Selectors UAC1 +typedef enum { + AUDIO10_TE_CTRL_UNDEF = 0x00, + AUDIO10_TE_CTRL_COPY_PROTECT = 0x01, } audio10_terminal_control_selector_t; -/// A.9.2 - Feature Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_FU_CTRL_UNDEF = 0x00, - AUDIO10_FU_CTRL_MUTE = 0x01, - AUDIO10_FU_CTRL_VOLUME = 0x02, - AUDIO10_FU_CTRL_BASS = 0x03, - AUDIO10_FU_CTRL_MID = 0x04, - AUDIO10_FU_CTRL_TREBLE = 0x05, - AUDIO10_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, - AUDIO10_FU_CTRL_AGC = 0x07, - AUDIO10_FU_CTRL_DELAY = 0x08, - AUDIO10_FU_CTRL_BASS_BOOST = 0x09, - AUDIO10_FU_CTRL_LOUDNESS = 0x0A, +/// A.10.2 - Feature Unit Control Selectors UAC1 +typedef enum { + AUDIO10_FU_CTRL_UNDEF = 0x00, + AUDIO10_FU_CTRL_MUTE = 0x01, + AUDIO10_FU_CTRL_VOLUME = 0x02, + AUDIO10_FU_CTRL_BASS = 0x03, + AUDIO10_FU_CTRL_MID = 0x04, + AUDIO10_FU_CTRL_TREBLE = 0x05, + AUDIO10_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, + AUDIO10_FU_CTRL_AGC = 0x07, + AUDIO10_FU_CTRL_DELAY = 0x08, + AUDIO10_FU_CTRL_BASS_BOOST = 0x09, + AUDIO10_FU_CTRL_LOUDNESS = 0x0A, } audio10_feature_unit_control_selector_t; -/// A.9.3 - Up/Down-mix Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_UD_CTRL_UNDEF = 0x00, - AUDIO10_UD_CTRL_ENABLE = 0x01, - AUDIO10_UD_CTRL_MODE_SELECT = 0x02, +/// A.10.3.1 - Up/Down-mix Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_UD_CTRL_UNDEF = 0x00, + AUDIO10_UD_CTRL_ENABLE = 0x01, + AUDIO10_UD_CTRL_MODE_SELECT = 0x02, } audio10_up_down_mix_control_selector_t; -/// A.9.4 - Dolby Prologic Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_DP_CTRL_UNDEF = 0x00, - AUDIO10_DP_CTRL_ENABLE = 0x01, - AUDIO10_DP_CTRL_MODE_SELECT = 0x02, +/// A.10.3.2 - Dolby Prologic Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_DP_CTRL_UNDEF = 0x00, + AUDIO10_DP_CTRL_ENABLE = 0x01, + AUDIO10_DP_CTRL_MODE_SELECT = 0x02, } audio10_dolby_prologic_control_selector_t; -/// A.9.5 - 3D Stereo Extender Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_3D_CTRL_UNDEF = 0x00, - AUDIO10_3D_CTRL_ENABLE = 0x01, - AUDIO10_3D_CTRL_SPACIOUSNESS = 0x02, +/// A.10.3.3 - 3D Stereo Extender Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_3D_CTRL_UNDEF = 0x00, + AUDIO10_3D_CTRL_ENABLE = 0x01, + AUDIO10_3D_CTRL_SPACIOUSNESS = 0x02, } audio10_3d_stereo_extender_control_selector_t; -/// A.9.6 - Reverberation Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_RV_CTRL_UNDEF = 0x00, - AUDIO10_RV_CTRL_ENABLE = 0x01, - AUDIO10_RV_CTRL_REVERB_LEVEL = 0x02, - AUDIO10_RV_CTRL_REVERB_TIME = 0x03, - AUDIO10_RV_CTRL_REVERB_FEEDBACK = 0x04, +/// A.10.3.4 - Reverberation Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_RV_CTRL_UNDEF = 0x00, + AUDIO10_RV_CTRL_ENABLE = 0x01, + AUDIO10_RV_CTRL_REVERB_LEVEL = 0x02, + AUDIO10_RV_CTRL_REVERB_TIME = 0x03, + AUDIO10_RV_CTRL_REVERB_FEEDBACK = 0x04, } audio10_reverberation_control_selector_t; -/// A.9.7 - Chorus Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_CH_CTRL_UNDEF = 0x00, - AUDIO10_CH_CTRL_ENABLE = 0x01, - AUDIO10_CH_CTRL_CHORUS_LEVEL = 0x02, - AUDIO10_CH_CTRL_CHORUS_RATE = 0x03, - AUDIO10_CH_CTRL_CHORUS_DEPTH = 0x04, +/// A.10.3.5 - Chorus Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_CH_CTRL_UNDEF = 0x00, + AUDIO10_CH_CTRL_ENABLE = 0x01, + AUDIO10_CH_CTRL_CHORUS_LEVEL = 0x02, + AUDIO10_CH_CTRL_CHORUS_RATE = 0x03, + AUDIO10_CH_CTRL_CHORUS_DEPTH = 0x04, } audio10_chorus_control_selector_t; -/// A.9.8 - Dynamic Range Compressor Processing Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_DR_CTRL_UNDEF = 0x00, - AUDIO10_DR_CTRL_ENABLE = 0x01, - AUDIO10_DR_CTRL_COMPRESSION_RATE = 0x02, - AUDIO10_DR_CTRL_MAXAMPL = 0x03, - AUDIO10_DR_CTRL_THRESHOLD = 0x04, - AUDIO10_DR_CTRL_ATTACK_TIME = 0x05, - AUDIO10_DR_CTRL_RELEASE_TIME = 0x06, +/// A.10.3.6 - Dynamic Range Compressor Processing Unit Control Selectors UAC1 +typedef enum { + AUDIO10_DR_CTRL_UNDEF = 0x00, + AUDIO10_DR_CTRL_ENABLE = 0x01, + AUDIO10_DR_CTRL_COMPRESSION_RATE = 0x02, + AUDIO10_DR_CTRL_MAXAMPL = 0x03, + AUDIO10_DR_CTRL_THRESHOLD = 0x04, + AUDIO10_DR_CTRL_ATTACK_TIME = 0x05, + AUDIO10_DR_CTRL_RELEASE_TIME = 0x06, } audio10_dynamic_range_compression_control_selector_t; -/// A.9.9 - Extension Unit Control Selectors UAC1 -typedef enum -{ - AUDIO10_XU_CTRL_UNDEF = 0x00, - AUDIO10_XU_CTRL_ENABLE = 0x01, +/// A.10.4 - Extension Unit Control Selectors UAC1 +typedef enum { + AUDIO10_XU_CTRL_UNDEF = 0x00, + AUDIO10_XU_CTRL_ENABLE = 0x01, } audio10_extension_unit_control_selector_t; -/// A.9.10 - Endpoint Control Selectors UAC1 -typedef enum -{ - AUDIO10_EP_CTRL_UNDEF = 0x00, - AUDIO10_EP_CTRL_SAMPLING_FREQ = 0x01, - AUDIO10_EP_CTRL_PITCH = 0x02, +/// A.10.5 - Endpoint Control Selectors UAC1 +typedef enum { + AUDIO10_EP_CTRL_UNDEF = 0x00, + AUDIO10_EP_CTRL_SAMPLING_FREQ = 0x01, + AUDIO10_EP_CTRL_PITCH = 0x02, } audio10_ep_control_selector_t; +/// Audio Class-Specific AS Isochronous Data EP Attributes UAC1 +typedef enum { + AUDIO10_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, + AUDIO10_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, + AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ = 0x01, + AUDIO10_CS_AS_ISO_DATA_EP_ATT_PITCH = 0x02, +} audio10_cs_as_iso_data_ep_attribute_t; + +/// Audio Class-Specific AS Isochronous Data EP Lock Delay Units UAC1 +typedef enum { + AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, + AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, + AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, +} audio10_cs_as_iso_data_ep_lock_delay_unit_t; + +/// Audio Class-Feature Unit Controls UAC1 +typedef enum { + AUDIO10_FU_CONTROL_BM_MUTE = 1 << 0, + AUDIO10_FU_CONTROL_BM_VOLUME = 1 << 1, + AUDIO10_FU_CONTROL_BM_BASS = 1 << 2, + AUDIO10_FU_CONTROL_BM_MID = 1 << 3, + AUDIO10_FU_CONTROL_BM_TREBLE = 1 << 4, + AUDIO10_FU_CONTROL_BM_GRAPHIC_EQUALIZER = 1 << 5, + AUDIO10_FU_CONTROL_BM_AGC = 1 << 6, + AUDIO10_FU_CONTROL_BM_DELAY = 1 << 7, + AUDIO10_FU_CONTROL_BM_BASS_BOOST = 1 << 8, + AUDIO10_FU_CONTROL_BM_LOUDNESS = 1 << 9, +} audio10_feature_unit_control_bitmap_t; + /// A.1 - Audio Class-Format Type Codes UAC1 -typedef enum -{ - AUDIO10_FORMAT_TYPE_UNDEFINED = 0x00, - AUDIO10_FORMAT_TYPE_I = 0x01, - AUDIO10_FORMAT_TYPE_II = 0x02, - AUDIO10_FORMAT_TYPE_III = 0x03, +typedef enum { + AUDIO10_FORMAT_TYPE_UNDEFINED = 0x00, + AUDIO10_FORMAT_TYPE_I = 0x01, + AUDIO10_FORMAT_TYPE_II = 0x02, + AUDIO10_FORMAT_TYPE_III = 0x03, } audio10_format_type_t; // A.1.1 - Audio Class-Audio Data Format Type I UAC1 -typedef enum -{ - AUDIO10_DATA_FORMAT_TYPE_I_PCM = 0x0001, - AUDIO10_DATA_FORMAT_TYPE_I_PCM8 = 0x0002, - AUDIO10_DATA_FORMAT_TYPE_I_IEEE_FLOAT = 0x0003, - AUDIO10_DATA_FORMAT_TYPE_I_ALAW = 0x0004, - AUDIO10_DATA_FORMAT_TYPE_I_MULAW = 0x0005, +typedef enum { + AUDIO10_DATA_FORMAT_TYPE_I_PCM = 0x0001, + AUDIO10_DATA_FORMAT_TYPE_I_PCM8 = 0x0002, + AUDIO10_DATA_FORMAT_TYPE_I_IEEE_FLOAT = 0x0003, + AUDIO10_DATA_FORMAT_TYPE_I_ALAW = 0x0004, + AUDIO10_DATA_FORMAT_TYPE_I_MULAW = 0x0005, } audio10_data_format_type_I_t; // A.1.2 - Audio Class-Audio Data Format Type II UAC1 -typedef enum -{ - AUDIO10_DATA_FORMAT_TYPE_II_MPEG = 0x1001, - AUDIO10_DATA_FORMAT_TYPE_II_AC3 = 0x1002, +typedef enum { + AUDIO10_DATA_FORMAT_TYPE_II_MPEG = 0x1001, + AUDIO10_DATA_FORMAT_TYPE_II_AC3 = 0x1002, } audio10_data_format_type_II_t; // A.1.3 - Audio Class-Audio Data Format Type III UAC1 -typedef enum -{ - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_AC3_1 = 0x2001, - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L1_1 = 0x2002, - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L23_1 = 0x2003, - AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_EXT_1 = 0x2004, +typedef enum { + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_AC3_1 = 0x2001, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L1_1 = 0x2002, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG1_L23_1 = 0x2003, + AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_EXT_1 = 0x2004, AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_L1_LS_1 = 0x2005, AUDIO10_DATA_FORMAT_TYPE_III_IEC1937_MPEG2_L23_LS_1 = 0x2006, } audio10_data_format_type_III_t; /// Audio Class-Audio Channel Configuration UAC1 (Table A-7) -typedef enum -{ - AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED = 0x0000, - AUDIO10_CHANNEL_CONFIG_LEFT_FRONT = 0x0001, - AUDIO10_CHANNEL_CONFIG_RIGHT_FRONT = 0x0002, - AUDIO10_CHANNEL_CONFIG_CENTER_FRONT = 0x0004, - AUDIO10_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x0008, - AUDIO10_CHANNEL_CONFIG_LEFT_SURROUND = 0x0010, - AUDIO10_CHANNEL_CONFIG_RIGHT_SURROUND = 0x0020, - AUDIO10_CHANNEL_CONFIG_LEFT_OF_CENTER = 0x0040, - AUDIO10_CHANNEL_CONFIG_RIGHT_OF_CENTER = 0x0080, - AUDIO10_CHANNEL_CONFIG_SURROUND = 0x0100, - AUDIO10_CHANNEL_CONFIG_SIDE_LEFT = 0x0200, - AUDIO10_CHANNEL_CONFIG_SIDE_RIGHT = 0x0400, - AUDIO10_CHANNEL_CONFIG_TOP = 0x0800, +typedef enum { + AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED = 0x0000, + AUDIO10_CHANNEL_CONFIG_LEFT_FRONT = 0x0001, + AUDIO10_CHANNEL_CONFIG_RIGHT_FRONT = 0x0002, + AUDIO10_CHANNEL_CONFIG_CENTER_FRONT = 0x0004, + AUDIO10_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x0008, + AUDIO10_CHANNEL_CONFIG_LEFT_SURROUND = 0x0010, + AUDIO10_CHANNEL_CONFIG_RIGHT_SURROUND = 0x0020, + AUDIO10_CHANNEL_CONFIG_LEFT_OF_CENTER = 0x0040, + AUDIO10_CHANNEL_CONFIG_RIGHT_OF_CENTER = 0x0080, + AUDIO10_CHANNEL_CONFIG_SURROUND = 0x0100, + AUDIO10_CHANNEL_CONFIG_SIDE_LEFT = 0x0200, + AUDIO10_CHANNEL_CONFIG_SIDE_RIGHT = 0x0400, + AUDIO10_CHANNEL_CONFIG_TOP = 0x0800, } audio10_channel_config_t; -//--------------------------------------------------------------------+ -// USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS -//--------------------------------------------------------------------+ + //--------------------------------------------------------------------+ + // USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS + //--------------------------------------------------------------------+ -/// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) -#define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 8+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */\ - uint16_t bcdADC ; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */\ - uint16_t wTotalLength ; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */\ - uint8_t bInCollection ; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */\ - uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */\ -} + /// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) + #define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */ \ + uint16_t bcdADC; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */ \ + uint16_t wTotalLength; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */ \ + uint8_t bInCollection; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */ \ + uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */ \ + } /// AUDIO Input Terminal Descriptor UAC1 (4.3.2.1) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 12. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. - uint8_t bAssocTerminal ; ///< ID of the Output Terminal to which this Input Terminal is associated. - uint8_t bNrChannels ; ///< Number of logical output channels in the Terminal's output audio channel cluster. - uint16_t wChannelConfig ; ///< Describes the spatial location of the logical channels. - uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first logical channel. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Input Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 12. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. + uint8_t bAssocTerminal; ///< ID of the Output Terminal to which this Input Terminal is associated. + uint8_t bNrChannels; ///< Number of logical output channels in the Terminal's output audio channel cluster. + uint16_t wChannelConfig; ///< Describes the spatial location of the logical channels. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first logical channel. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Input Terminal. } audio10_desc_input_terminal_t; /// AUDIO Output Terminal Descriptor UAC1 (4.3.2.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 9. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. - uint8_t bAssocTerminal ; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. - uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Terminal is connected. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Output Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 9. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. + uint8_t bAssocTerminal; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. + uint8_t bSourceID; ///< ID of the Unit or Terminal to which this Terminal is connected. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Output Terminal. } audio10_desc_output_terminal_t; /// AUDIO Mixer Unit Descriptor UAC1 (4.3.2.3) -#define audio10_desc_mixer_unit_n_t(numInputPins, numControlBytes) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 10+p+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_MIXER_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Mixer Unit are connected. */\ - uint8_t bNrChannels ; /* Number of logical output channels in the Mixer Unit's output audio channel cluster. */\ - uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ - uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ - uint8_t bmControls[numControlBytes]; /* Mixer Unit Controls bitmap. */\ - uint8_t iMixer ; /* Index of a string descriptor, describing the Mixer Unit. */\ -} +#define audio10_desc_mixer_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 10+p+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_MIXER_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Mixer Unit are connected. */ \ + uint8_t bNrChannels; /* Number of logical output channels in the Mixer Unit's output audio channel cluster. */ \ + uint16_t wChannelConfig; /* Describes the spatial location of the logical channels. */ \ + uint8_t iChannelNames; /* Index of a string descriptor, describing the name of the first logical channel. */ \ + uint8_t bmControls[numControlBytes]; /* Mixer Unit Controls bitmap. */ \ + uint8_t iMixer; /* Index of a string descriptor, describing the Mixer Unit. */ \ + } /// AUDIO Selector Unit Descriptor UAC1 (4.3.2.4) -#define audio10_desc_selector_unit_n_t(numInputPins) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 6+p. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Selector Unit are connected. */\ - uint8_t iSelector ; /* Index of a string descriptor, describing the Selector Unit. */\ -} +#define audio10_desc_selector_unit_n_t(numInputPins) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 6+p. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Selector Unit are connected. */ \ + uint8_t iSelector; /* Index of a string descriptor, describing the Selector Unit. */ \ + } /// AUDIO Feature Unit Descriptor UAC1 (4.3.2.5) -#define audio10_desc_feature_unit_n_t(numChannels, controlSize) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 7+(ch+1)*n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint8_t bSourceID ; /* ID of the Unit or Terminal to which this Feature Unit is connected. */\ - uint8_t bControlSize ; /* Size in bytes of an element of the bmaControls() array. */\ - uint8_t bmaControls[(numChannels+1)*controlSize]; /* Control bitmaps for master + logical channels. */\ - uint8_t iFeature ; /* Index of a string descriptor, describing this Feature Unit. */\ -} +#define audio10_desc_feature_unit_n_t(numChannels, controlSize) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 7+(ch+1)*n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint8_t bSourceID; /* ID of the Unit or Terminal to which this Feature Unit is connected. */ \ + uint8_t bControlSize; /* Size in bytes of an element of the bmaControls() array. */ \ + uint8_t bmaControls[(numChannels + 1) * controlSize]; /* Control bitmaps for master + logical channels. */ \ + uint8_t iFeature; /* Index of a string descriptor, describing this Feature Unit. */ \ + } /// AUDIO Processing Unit Descriptor UAC1 (4.3.2.6) -#define audio10_desc_processing_unit_n_t(numInputPins, numControlBytes) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 13+p+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint16_t wProcessType ; /* Constant identifying the type of processing this Unit is performing. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Processing Unit are connected. */\ - uint8_t bNrChannels ; /* Number of logical output channels in the Processing Unit's output audio channel cluster. */\ - uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ - uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ - uint8_t bControlSize ; /* Size in bytes of the bmControls field. */\ - uint8_t bmControls[numControlBytes]; /* Processing Unit Controls bitmap. */\ - uint8_t iProcessing ; /* Index of a string descriptor, describing the Processing Unit. */\ -} +#define audio10_desc_processing_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 13+p+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_PROCESSING_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint16_t wProcessType; /* Constant identifying the type of processing this Unit is performing. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Processing Unit are connected. */ \ + uint8_t bNrChannels; /* Number of logical output channels in the Processing Unit's output audio channel cluster. */ \ + uint16_t wChannelConfig; /* Describes the spatial location of the logical channels. */ \ + uint8_t iChannelNames; /* Index of a string descriptor, describing the name of the first logical channel. */ \ + uint8_t bControlSize; /* Size in bytes of the bmControls field. */ \ + uint8_t bmControls[numControlBytes]; /* Processing Unit Controls bitmap. */ \ + uint8_t iProcessing; /* Index of a string descriptor, describing the Processing Unit. */ \ + } /// AUDIO Extension Unit Descriptor UAC1 (4.3.2.7) -#define audio10_desc_extension_unit_n_t(numInputPins, numControlBytes) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 13+p+n. */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT. */\ - uint8_t bUnitID ; /* Constant uniquely identifying the Unit within the audio function. */\ - uint16_t wExtensionCode ; /* Vendor-specific code identifying the Extension Unit. */\ - uint8_t bNrInPins ; /* Number of Input Pins of this Unit: p. */\ - uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Extension Unit are connected. */\ - uint8_t bNrChannels ; /* Number of logical output channels in the Extension Unit's output audio channel cluster. */\ - uint16_t wChannelConfig ; /* Describes the spatial location of the logical channels. */\ - uint8_t iChannelNames ; /* Index of a string descriptor, describing the name of the first logical channel. */\ - uint8_t bControlSize ; /* Size in bytes of the bmControls field. */\ - uint8_t bmControls[numControlBytes]; /* Extension Unit Controls bitmap. */\ - uint8_t iExtension ; /* Index of a string descriptor, describing the Extension Unit. */\ -} +#define audio10_desc_extension_unit_n_t(numInputPins, numControlBytes) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 13+p+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_EXTENSION_UNIT. */ \ + uint8_t bUnitID; /* Constant uniquely identifying the Unit within the audio function. */ \ + uint16_t wExtensionCode; /* Vendor-specific code identifying the Extension Unit. */ \ + uint8_t bNrInPins; /* Number of Input Pins of this Unit: p. */ \ + uint8_t baSourceID[numInputPins]; /* ID of the Unit or Terminal to which Input Pins of this Extension Unit are connected. */ \ + uint8_t bNrChannels; /* Number of logical output channels in the Extension Unit's output audio channel cluster. */ \ + uint16_t wChannelConfig; /* Describes the spatial location of the logical channels. */ \ + uint8_t iChannelNames; /* Index of a string descriptor, describing the name of the first logical channel. */ \ + uint8_t bControlSize; /* Size in bytes of the bmControls field. */ \ + uint8_t bmControls[numControlBytes]; /* Extension Unit Controls bitmap. */ \ + uint8_t iExtension; /* Index of a string descriptor, describing the Extension Unit. */ \ + } /// AUDIO Class-Specific AS Interface Descriptor UAC1 (4.5.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 7. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_AS_GENERAL. - uint8_t bTerminalLink ; ///< The Terminal ID of the Terminal to which the endpoint of this interface is connected. - uint8_t bDelay ; ///< Expressed in number of frames. - uint16_t wFormatTag ; ///< The Audio Data Format that has to be used to communicate with this interface. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 7. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_AS_GENERAL. + uint8_t bTerminalLink; ///< The Terminal ID of the Terminal to which the endpoint of this interface is connected. + uint8_t bDelay; ///< Expressed in number of frames. + uint16_t wFormatTag; ///< The Audio Data Format that has to be used to communicate with this interface. } audio10_desc_cs_as_interface_t; /// AUDIO Type I Format Type Descriptor UAC1 (2.2.5) -#define audio10_desc_type_I_format_n_t(numSamFreq) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 8+(ns*3). */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ - uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ - uint8_t bNrChannels ; /* Indicates the number of physical channels in the audio data stream. */\ - uint8_t bSubFrameSize ; /* The number of bytes occupied by one audio subframe. */\ - uint8_t bBitResolution ; /* The number of effectively used bits from the available bits in an audio subframe. */\ - uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ - uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ -} +#define audio10_desc_type_I_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+(ns*3). */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */ \ + uint8_t bFormatType; /* Constant identifying the Format Type the AudioStreaming interface is using. */ \ + uint8_t bNrChannels; /* Indicates the number of physical channels in the audio data stream. */ \ + uint8_t bSubFrameSize; /* The number of bytes occupied by one audio subframe. */ \ + uint8_t bBitResolution; /* The number of effectively used bits from the available bits in an audio subframe. */ \ + uint8_t bSamFreqType; /* Indicates how the sampling frequency can be programmed. */ \ + uint8_t tSamFreq[numSamFreq * 3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */ \ + } /// AUDIO Type II Format Type Descriptor UAC1 (2.3.5) -#define audio10_desc_type_II_format_n_t(numSamFreq) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 9+(ns*3). */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ - uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ - uint16_t wMaxBitRate ; /* Indicates the maximum number of bits per second this interface can handle. */\ - uint16_t wSamplesPerFrame ; /* Indicates the number of PCM audio samples contained in one encoded audio frame. */\ - uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ - uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ -} +#define audio10_desc_type_II_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 9+(ns*3). */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */ \ + uint8_t bFormatType; /* Constant identifying the Format Type the AudioStreaming interface is using. */ \ + uint16_t wMaxBitRate; /* Indicates the maximum number of bits per second this interface can handle. */ \ + uint16_t wSamplesPerFrame; /* Indicates the number of PCM audio samples contained in one encoded audio frame. */ \ + uint8_t bSamFreqType; /* Indicates how the sampling frequency can be programmed. */ \ + uint8_t tSamFreq[numSamFreq * 3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */ \ + } /// AUDIO Type III Format Type Descriptor UAC1 (2.4.5) -#define audio10_desc_type_III_format_n_t(numSamFreq) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* Size of this descriptor in bytes: 8+(ns*3). */\ - uint8_t bDescriptorType ; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */\ - uint8_t bDescriptorSubType ; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */\ - uint8_t bFormatType ; /* Constant identifying the Format Type the AudioStreaming interface is using. */\ - uint8_t bNrChannels ; /* Indicates the number of physical channels in the audio data stream. */\ - uint8_t bSubFrameSize ; /* The number of bytes occupied by one audio subframe. */\ - uint8_t bBitResolution ; /* The number of effectively used bits from the available bits in an audio subframe. */\ - uint8_t bSamFreqType ; /* Indicates how the sampling frequency can be programmed. */\ - uint8_t tSamFreq[numSamFreq*3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */\ -} +#define audio10_desc_type_III_format_n_t(numSamFreq) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+(ns*3). */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE. */ \ + uint8_t bFormatType; /* Constant identifying the Format Type the AudioStreaming interface is using. */ \ + uint8_t bNrChannels; /* Indicates the number of physical channels in the audio data stream. */ \ + uint8_t bSubFrameSize; /* The number of bytes occupied by one audio subframe. */ \ + uint8_t bBitResolution; /* The number of effectively used bits from the available bits in an audio subframe. */ \ + uint8_t bSamFreqType; /* Indicates how the sampling frequency can be programmed. */ \ + uint8_t tSamFreq[numSamFreq * 3]; /* Sampling frequency or lower/upper bounds in Hz for the sampling frequency range. */ \ + } + +/// Standard AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.1) +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 9. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_ENDPOINT. + uint8_t bEndpointAddress;///< The address of the endpoint on the USB device described by this descriptor. + uint8_t bmAttributes; ///< Endpoint attributes when configured using the bEndpointAddress field. + uint16_t wMaxPacketSize; ///< Maximum packet size this endpoint is capable of sending or receiving when this configuration is selected. + uint8_t bInterval; ///< Interval for polling endpoint for data transfers. + uint8_t bRefresh; ///< The rate at which the endpoint is refreshed. + uint8_t bSynchAddress; ///< The address of the endpoint used to send synchronization information for the data endpoint. +} audio10_desc_as_iso_data_ep_t; /// AUDIO Class-Specific AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 7. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO10_CS_EP_SUBTYPE_GENERAL. - uint8_t bmAttributes ; ///< Bit 0: Sampling Frequency, Bit 1: Pitch, Bit 7: MaxPacketsOnly. - uint8_t bLockDelayUnits ; ///< Indicates the units used for the wLockDelay field. - uint16_t wLockDelay ; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 7. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO10_CS_EP_SUBTYPE_GENERAL. + uint8_t bmAttributes; ///< Bit 0: Sampling Frequency, Bit 1: Pitch, Bit 7: MaxPacketsOnly. + uint8_t bLockDelayUnits; ///< Indicates the units used for the wLockDelay field. + uint16_t wLockDelay; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. } audio10_desc_cs_as_iso_data_ep_t; /// AUDIO Interrupt Data Message Format UAC1 (3.7.1.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bStatusType ; ///< Indicates the type of status information being reported. - uint8_t bOriginator ; ///< Indicates the entity that originated this status information. +typedef struct TU_ATTR_PACKED { + uint8_t bStatusType;///< Indicates the type of status information being reported. + uint8_t bOriginator;///< Indicates the entity that originated this status information. } audio10_interrupt_data_t; //--------------------------------------------------------------------+ @@ -470,576 +517,494 @@ typedef struct TU_ATTR_PACKED //--------------------------------------------------------------------+ /// A.7 - Audio Function Category Codes -typedef enum -{ - AUDIO20_FUNC_UNDEF = 0x00, - AUDIO20_FUNC_DESKTOP_SPEAKER = 0x01, - AUDIO20_FUNC_HOME_THEATER = 0x02, - AUDIO20_FUNC_MICROPHONE = 0x03, - AUDIO20_FUNC_HEADSET = 0x04, - AUDIO20_FUNC_TELEPHONE = 0x05, - AUDIO20_FUNC_CONVERTER = 0x06, - AUDIO20_FUNC_SOUND_RECODER = 0x07, - AUDIO20_FUNC_IO_BOX = 0x08, +typedef enum { + AUDIO20_FUNC_UNDEF = 0x00, + AUDIO20_FUNC_DESKTOP_SPEAKER = 0x01, + AUDIO20_FUNC_HOME_THEATER = 0x02, + AUDIO20_FUNC_MICROPHONE = 0x03, + AUDIO20_FUNC_HEADSET = 0x04, + AUDIO20_FUNC_TELEPHONE = 0x05, + AUDIO20_FUNC_CONVERTER = 0x06, + AUDIO20_FUNC_SOUND_RECODER = 0x07, + AUDIO20_FUNC_IO_BOX = 0x08, AUDIO20_FUNC_MUSICAL_INSTRUMENT = 0x09, - AUDIO20_FUNC_PRO_AUDIO = 0x0A, - AUDIO20_FUNC_AUDIO_VIDEO = 0x0B, - AUDIO20_FUNC_CONTROL_PANEL = 0x0C, - AUDIO20_FUNC_OTHER = 0xFF, + AUDIO20_FUNC_PRO_AUDIO = 0x0A, + AUDIO20_FUNC_AUDIO_VIDEO = 0x0B, + AUDIO20_FUNC_CONTROL_PANEL = 0x0C, + AUDIO20_FUNC_OTHER = 0xFF, } audio20_function_code_t; /// A.9 - Audio Class-Specific AC Interface Descriptor Subtypes UAC2 -typedef enum -{ - AUDIO20_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, - AUDIO20_CS_AC_INTERFACE_HEADER = 0x01, - AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, - AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, - AUDIO20_CS_AC_INTERFACE_MIXER_UNIT = 0x04, - AUDIO20_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, - AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, - AUDIO20_CS_AC_INTERFACE_EFFECT_UNIT = 0x07, - AUDIO20_CS_AC_INTERFACE_PROCESSING_UNIT = 0x08, - AUDIO20_CS_AC_INTERFACE_EXTENSION_UNIT = 0x09, - AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE = 0x0A, - AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR = 0x0B, - AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER = 0x0C, +typedef enum { + AUDIO20_CS_AC_INTERFACE_AC_DESCRIPTOR_UNDEF = 0x00, + AUDIO20_CS_AC_INTERFACE_HEADER = 0x01, + AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL = 0x02, + AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL = 0x03, + AUDIO20_CS_AC_INTERFACE_MIXER_UNIT = 0x04, + AUDIO20_CS_AC_INTERFACE_SELECTOR_UNIT = 0x05, + AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT = 0x06, + AUDIO20_CS_AC_INTERFACE_EFFECT_UNIT = 0x07, + AUDIO20_CS_AC_INTERFACE_PROCESSING_UNIT = 0x08, + AUDIO20_CS_AC_INTERFACE_EXTENSION_UNIT = 0x09, + AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE = 0x0A, + AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR = 0x0B, + AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER = 0x0C, AUDIO20_CS_AC_INTERFACE_SAMPLE_RATE_CONVERTER = 0x0D, } audio20_cs_ac_interface_subtype_t; /// A.10 - Audio Class-Specific AS Interface Descriptor Subtypes UAC2 -typedef enum -{ - AUDIO20_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, - AUDIO20_CS_AS_INTERFACE_AS_GENERAL = 0x01, - AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, - AUDIO20_CS_AS_INTERFACE_ENCODER = 0x03, - AUDIO20_CS_AS_INTERFACE_DECODER = 0x04, +typedef enum { + AUDIO20_CS_AS_INTERFACE_AS_DESCRIPTOR_UNDEF = 0x00, + AUDIO20_CS_AS_INTERFACE_AS_GENERAL = 0x01, + AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE = 0x02, + AUDIO20_CS_AS_INTERFACE_ENCODER = 0x03, + AUDIO20_CS_AS_INTERFACE_DECODER = 0x04, } audio20_cs_as_interface_subtype_t; /// A.11 - Effect Unit Effect Types -typedef enum -{ - AUDIO20_EFFECT_TYPE_UNDEF = 0x00, - AUDIO20_EFFECT_TYPE_PARAM_EQ_SECTION = 0x01, - AUDIO20_EFFECT_TYPE_REVERBERATION = 0x02, - AUDIO20_EFFECT_TYPE_MOD_DELAY = 0x03, - AUDIO20_EFFECT_TYPE_DYN_RANGE_COMP = 0x04, +typedef enum { + AUDIO20_EFFECT_TYPE_UNDEF = 0x00, + AUDIO20_EFFECT_TYPE_PARAM_EQ_SECTION = 0x01, + AUDIO20_EFFECT_TYPE_REVERBERATION = 0x02, + AUDIO20_EFFECT_TYPE_MOD_DELAY = 0x03, + AUDIO20_EFFECT_TYPE_DYN_RANGE_COMP = 0x04, } audio20_effect_unit_effect_type_t; /// A.12 - Processing Unit Process Types -typedef enum -{ - AUDIO20_PROCESS_TYPE_UNDEF = 0x00, - AUDIO20_PROCESS_TYPE_UP_DOWN_MIX = 0x01, - AUDIO20_PROCESS_TYPE_DOLBY_PROLOGIC = 0x02, - AUDIO20_PROCESS_TYPE_STEREO_EXTENDER = 0x03, +typedef enum { + AUDIO20_PROCESS_TYPE_UNDEF = 0x00, + AUDIO20_PROCESS_TYPE_UP_DOWN_MIX = 0x01, + AUDIO20_PROCESS_TYPE_DOLBY_PROLOGIC = 0x02, + AUDIO20_PROCESS_TYPE_STEREO_EXTENDER = 0x03, } audio20_processing_unit_process_type_t; /// A.13 - Audio Class-Specific EP Descriptor Subtypes UAC2 -typedef enum -{ - AUDIO20_CS_EP_SUBTYPE_UNDEF = 0x00, - AUDIO20_CS_EP_SUBTYPE_GENERAL = 0x01, +typedef enum { + AUDIO20_CS_EP_SUBTYPE_UNDEF = 0x00, + AUDIO20_CS_EP_SUBTYPE_GENERAL = 0x01, } audio20_cs_ep_subtype_t; /// A.14 - Audio Class-Specific Request Codes UAC2 -typedef enum -{ - AUDIO20_CS_REQ_UNDEF = 0x00, - AUDIO20_CS_REQ_CUR = 0x01, - AUDIO20_CS_REQ_RANGE = 0x02, - AUDIO20_CS_REQ_MEM = 0x03, +typedef enum { + AUDIO20_CS_REQ_UNDEF = 0x00, + AUDIO20_CS_REQ_CUR = 0x01, + AUDIO20_CS_REQ_RANGE = 0x02, + AUDIO20_CS_REQ_MEM = 0x03, } audio20_cs_req_t; /// A.17 - Control Selector Codes UAC2 /// A.17.1 - Clock Source Control Selectors -typedef enum -{ - AUDIO20_CS_CTRL_UNDEF = 0x00, - AUDIO20_CS_CTRL_SAM_FREQ = 0x01, - AUDIO20_CS_CTRL_CLK_VALID = 0x02, +typedef enum { + AUDIO20_CS_CTRL_UNDEF = 0x00, + AUDIO20_CS_CTRL_SAM_FREQ = 0x01, + AUDIO20_CS_CTRL_CLK_VALID = 0x02, } audio20_clock_src_control_selector_t; /// A.17.2 - Clock Selector Control Selectors -typedef enum -{ - AUDIO20_CX_CTRL_UNDEF = 0x00, - AUDIO20_CX_CTRL_CONTROL = 0x01, +typedef enum { + AUDIO20_CX_CTRL_UNDEF = 0x00, + AUDIO20_CX_CTRL_CONTROL = 0x01, } audio20_clock_sel_control_selector_t; /// A.17.3 - Clock Multiplier Control Selectors -typedef enum -{ - AUDIO20_CM_CTRL_UNDEF = 0x00, - AUDIO20_CM_CTRL_NUMERATOR_CONTROL = 0x01, - AUDIO20_CM_CTRL_DENOMINATOR_CONTROL = 0x02, +typedef enum { + AUDIO20_CM_CTRL_UNDEF = 0x00, + AUDIO20_CM_CTRL_NUMERATOR_CONTROL = 0x01, + AUDIO20_CM_CTRL_DENOMINATOR_CONTROL = 0x02, } audio20_clock_mul_control_selector_t; /// A.17.4 - Terminal Control Selectors UAC2 -typedef enum -{ - AUDIO20_TE_CTRL_UNDEF = 0x00, - AUDIO20_TE_CTRL_COPY_PROTECT = 0x01, - AUDIO20_TE_CTRL_CONNECTOR = 0x02, - AUDIO20_TE_CTRL_OVERLOAD = 0x03, - AUDIO20_TE_CTRL_CLUSTER = 0x04, - AUDIO20_TE_CTRL_UNDERFLOW = 0x05, - AUDIO20_TE_CTRL_OVERFLOW = 0x06, - AUDIO20_TE_CTRL_LATENCY = 0x07, +typedef enum { + AUDIO20_TE_CTRL_UNDEF = 0x00, + AUDIO20_TE_CTRL_COPY_PROTECT = 0x01, + AUDIO20_TE_CTRL_CONNECTOR = 0x02, + AUDIO20_TE_CTRL_OVERLOAD = 0x03, + AUDIO20_TE_CTRL_CLUSTER = 0x04, + AUDIO20_TE_CTRL_UNDERFLOW = 0x05, + AUDIO20_TE_CTRL_OVERFLOW = 0x06, + AUDIO20_TE_CTRL_LATENCY = 0x07, } audio20_terminal_control_selector_t; /// A.17.5 - Mixer Control Selectors -typedef enum -{ - AUDIO20_MU_CTRL_UNDEF = 0x00, - AUDIO20_MU_CTRL_MIXER = 0x01, - AUDIO20_MU_CTRL_CLUSTER = 0x02, - AUDIO20_MU_CTRL_UNDERFLOW = 0x03, - AUDIO20_MU_CTRL_OVERFLOW = 0x04, - AUDIO20_MU_CTRL_LATENCY = 0x05, +typedef enum { + AUDIO20_MU_CTRL_UNDEF = 0x00, + AUDIO20_MU_CTRL_MIXER = 0x01, + AUDIO20_MU_CTRL_CLUSTER = 0x02, + AUDIO20_MU_CTRL_UNDERFLOW = 0x03, + AUDIO20_MU_CTRL_OVERFLOW = 0x04, + AUDIO20_MU_CTRL_LATENCY = 0x05, } audio20_mixer_control_selector_t; /// A.17.6 - Selector Control Selectors -typedef enum -{ - AUDIO20_SU_CTRL_UNDEF = 0x00, - AUDIO20_SU_CTRL_SELECTOR = 0x01, - AUDIO20_SU_CTRL_LATENCY = 0x02, +typedef enum { + AUDIO20_SU_CTRL_UNDEF = 0x00, + AUDIO20_SU_CTRL_SELECTOR = 0x01, + AUDIO20_SU_CTRL_LATENCY = 0x02, } audio20_sel_control_selector_t; /// A.17.7 - Feature Unit Control Selectors UAC2 -typedef enum -{ - AUDIO20_FU_CTRL_UNDEF = 0x00, - AUDIO20_FU_CTRL_MUTE = 0x01, - AUDIO20_FU_CTRL_VOLUME = 0x02, - AUDIO20_FU_CTRL_BASS = 0x03, - AUDIO20_FU_CTRL_MID = 0x04, - AUDIO20_FU_CTRL_TREBLE = 0x05, - AUDIO20_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, - AUDIO20_FU_CTRL_AGC = 0x07, - AUDIO20_FU_CTRL_DELAY = 0x08, - AUDIO20_FU_CTRL_BASS_BOOST = 0x09, - AUDIO20_FU_CTRL_LOUDNESS = 0x0A, - AUDIO20_FU_CTRL_INPUT_GAIN = 0x0B, - AUDIO20_FU_CTRL_GAIN_PAD = 0x0C, - AUDIO20_FU_CTRL_INVERTER = 0x0D, - AUDIO20_FU_CTRL_UNDERFLOW = 0x0E, - AUDIO20_FU_CTRL_OVERVLOW = 0x0F, - AUDIO20_FU_CTRL_LATENCY = 0x10, +typedef enum { + AUDIO20_FU_CTRL_UNDEF = 0x00, + AUDIO20_FU_CTRL_MUTE = 0x01, + AUDIO20_FU_CTRL_VOLUME = 0x02, + AUDIO20_FU_CTRL_BASS = 0x03, + AUDIO20_FU_CTRL_MID = 0x04, + AUDIO20_FU_CTRL_TREBLE = 0x05, + AUDIO20_FU_CTRL_GRAPHIC_EQUALIZER = 0x06, + AUDIO20_FU_CTRL_AGC = 0x07, + AUDIO20_FU_CTRL_DELAY = 0x08, + AUDIO20_FU_CTRL_BASS_BOOST = 0x09, + AUDIO20_FU_CTRL_LOUDNESS = 0x0A, + AUDIO20_FU_CTRL_INPUT_GAIN = 0x0B, + AUDIO20_FU_CTRL_GAIN_PAD = 0x0C, + AUDIO20_FU_CTRL_INVERTER = 0x0D, + AUDIO20_FU_CTRL_UNDERFLOW = 0x0E, + AUDIO20_FU_CTRL_OVERVLOW = 0x0F, + AUDIO20_FU_CTRL_LATENCY = 0x10, } audio20_feature_unit_control_selector_t; /// A.17.8 Effect Unit Control Selectors /// A.17.8.1 Parametric Equalizer Section Effect Unit Control Selectors -typedef enum -{ - AUDIO20_PE_CTRL_UNDEF = 0x00, - AUDIO20_PE_CTRL_ENABLE = 0x01, - AUDIO20_PE_CTRL_CENTERFREQ = 0x02, - AUDIO20_PE_CTRL_QFACTOR = 0x03, - AUDIO20_PE_CTRL_GAIN = 0x04, - AUDIO20_PE_CTRL_UNDERFLOW = 0x05, - AUDIO20_PE_CTRL_OVERFLOW = 0x06, - AUDIO20_PE_CTRL_LATENCY = 0x07, +typedef enum { + AUDIO20_PE_CTRL_UNDEF = 0x00, + AUDIO20_PE_CTRL_ENABLE = 0x01, + AUDIO20_PE_CTRL_CENTERFREQ = 0x02, + AUDIO20_PE_CTRL_QFACTOR = 0x03, + AUDIO20_PE_CTRL_GAIN = 0x04, + AUDIO20_PE_CTRL_UNDERFLOW = 0x05, + AUDIO20_PE_CTRL_OVERFLOW = 0x06, + AUDIO20_PE_CTRL_LATENCY = 0x07, } audio20_parametric_equalizer_control_selector_t; /// A.17.8.2 Reverberation Effect Unit Control Selectors -typedef enum -{ - AUDIO20_RV_CTRL_UNDEF = 0x00, - AUDIO20_RV_CTRL_ENABLE = 0x01, - AUDIO20_RV_CTRL_TYPE = 0x02, - AUDIO20_RV_CTRL_LEVEL = 0x03, - AUDIO20_RV_CTRL_TIME = 0x04, - AUDIO20_RV_CTRL_FEEDBACK = 0x05, - AUDIO20_RV_CTRL_PREDELAY = 0x06, - AUDIO20_RV_CTRL_DENSITY = 0x07, - AUDIO20_RV_CTRL_HIFREQ_ROLLOFF = 0x08, - AUDIO20_RV_CTRL_UNDERFLOW = 0x09, - AUDIO20_RV_CTRL_OVERFLOW = 0x0A, - AUDIO20_RV_CTRL_LATENCY = 0x0B, +typedef enum { + AUDIO20_RV_CTRL_UNDEF = 0x00, + AUDIO20_RV_CTRL_ENABLE = 0x01, + AUDIO20_RV_CTRL_TYPE = 0x02, + AUDIO20_RV_CTRL_LEVEL = 0x03, + AUDIO20_RV_CTRL_TIME = 0x04, + AUDIO20_RV_CTRL_FEEDBACK = 0x05, + AUDIO20_RV_CTRL_PREDELAY = 0x06, + AUDIO20_RV_CTRL_DENSITY = 0x07, + AUDIO20_RV_CTRL_HIFREQ_ROLLOFF = 0x08, + AUDIO20_RV_CTRL_UNDERFLOW = 0x09, + AUDIO20_RV_CTRL_OVERFLOW = 0x0A, + AUDIO20_RV_CTRL_LATENCY = 0x0B, } audio20_reverberation_effect_control_selector_t; /// A.17.8.3 Modulation Delay Effect Unit Control Selectors -typedef enum -{ - AUDIO20_MD_CTRL_UNDEF = 0x00, - AUDIO20_MD_CTRL_ENABLE = 0x01, - AUDIO20_MD_CTRL_BALANCE = 0x02, - AUDIO20_MD_CTRL_RATE = 0x03, - AUDIO20_MD_CTRL_DEPTH = 0x04, - AUDIO20_MD_CTRL_TIME = 0x05, - AUDIO20_MD_CTRL_FEEDBACK = 0x06, - AUDIO20_MD_CTRL_UNDERFLOW = 0x07, - AUDIO20_MD_CTRL_OVERFLOW = 0x08, - AUDIO20_MD_CTRL_LATENCY = 0x09, +typedef enum { + AUDIO20_MD_CTRL_UNDEF = 0x00, + AUDIO20_MD_CTRL_ENABLE = 0x01, + AUDIO20_MD_CTRL_BALANCE = 0x02, + AUDIO20_MD_CTRL_RATE = 0x03, + AUDIO20_MD_CTRL_DEPTH = 0x04, + AUDIO20_MD_CTRL_TIME = 0x05, + AUDIO20_MD_CTRL_FEEDBACK = 0x06, + AUDIO20_MD_CTRL_UNDERFLOW = 0x07, + AUDIO20_MD_CTRL_OVERFLOW = 0x08, + AUDIO20_MD_CTRL_LATENCY = 0x09, } audio20_modulation_delay_control_selector_t; /// A.17.8.4 Dynamic Range Compressor Effect Unit Control Selectors -typedef enum -{ - AUDIO20_DR_CTRL_UNDEF = 0x00, - AUDIO20_DR_CTRL_ENABLE = 0x01, - AUDIO20_DR_CTRL_COMPRESSION_RATE = 0x02, - AUDIO20_DR_CTRL_MAXAMPL = 0x03, - AUDIO20_DR_CTRL_THRESHOLD = 0x04, - AUDIO20_DR_CTRL_ATTACK_TIME = 0x05, - AUDIO20_DR_CTRL_RELEASE_TIME = 0x06, - AUDIO20_DR_CTRL_UNDERFLOW = 0x07, - AUDIO20_DR_CTRL_OVERFLOW = 0x08, - AUDIO20_DR_CTRL_LATENCY = 0x09, +typedef enum { + AUDIO20_DR_CTRL_UNDEF = 0x00, + AUDIO20_DR_CTRL_ENABLE = 0x01, + AUDIO20_DR_CTRL_COMPRESSION_RATE = 0x02, + AUDIO20_DR_CTRL_MAXAMPL = 0x03, + AUDIO20_DR_CTRL_THRESHOLD = 0x04, + AUDIO20_DR_CTRL_ATTACK_TIME = 0x05, + AUDIO20_DR_CTRL_RELEASE_TIME = 0x06, + AUDIO20_DR_CTRL_UNDERFLOW = 0x07, + AUDIO20_DR_CTRL_OVERFLOW = 0x08, + AUDIO20_DR_CTRL_LATENCY = 0x09, } audio20_dynamic_range_compression_control_selector_t; /// A.17.9 Processing Unit Control Selectors /// A.17.9.1 Up/Down-mix Processing Unit Control Selectors -typedef enum -{ - AUDIO20_UD_CTRL_UNDEF = 0x00, - AUDIO20_UD_CTRL_ENABLE = 0x01, - AUDIO20_UD_CTRL_MODE_SELECT = 0x02, - AUDIO20_UD_CTRL_CLUSTER = 0x03, - AUDIO20_UD_CTRL_UNDERFLOW = 0x04, - AUDIO20_UD_CTRL_OVERFLOW = 0x05, - AUDIO20_UD_CTRL_LATENCY = 0x06, +typedef enum { + AUDIO20_UD_CTRL_UNDEF = 0x00, + AUDIO20_UD_CTRL_ENABLE = 0x01, + AUDIO20_UD_CTRL_MODE_SELECT = 0x02, + AUDIO20_UD_CTRL_CLUSTER = 0x03, + AUDIO20_UD_CTRL_UNDERFLOW = 0x04, + AUDIO20_UD_CTRL_OVERFLOW = 0x05, + AUDIO20_UD_CTRL_LATENCY = 0x06, } audio20_up_down_mix_control_selector_t; /// A.17.9.2 Dolby Prologic ™ Processing Unit Control Selectors -typedef enum -{ - AUDIO20_DP_CTRL_UNDEF = 0x00, - AUDIO20_DP_CTRL_ENABLE = 0x01, - AUDIO20_DP_CTRL_MODE_SELECT = 0x02, - AUDIO20_DP_CTRL_CLUSTER = 0x03, - AUDIO20_DP_CTRL_UNDERFLOW = 0x04, - AUDIO20_DP_CTRL_OVERFLOW = 0x05, - AUDIO20_DP_CTRL_LATENCY = 0x06, +typedef enum { + AUDIO20_DP_CTRL_UNDEF = 0x00, + AUDIO20_DP_CTRL_ENABLE = 0x01, + AUDIO20_DP_CTRL_MODE_SELECT = 0x02, + AUDIO20_DP_CTRL_CLUSTER = 0x03, + AUDIO20_DP_CTRL_UNDERFLOW = 0x04, + AUDIO20_DP_CTRL_OVERFLOW = 0x05, + AUDIO20_DP_CTRL_LATENCY = 0x06, } audio20_dolby_prologic_control_selector_t; /// A.17.9.3 Stereo Extender Processing Unit Control Selectors -typedef enum -{ - AUDIO20_ST_EXT_CTRL_UNDEF = 0x00, - AUDIO20_ST_EXT_CTRL_ENABLE = 0x01, - AUDIO20_ST_EXT_CTRL_WIDTH = 0x02, - AUDIO20_ST_EXT_CTRL_UNDERFLOW = 0x03, - AUDIO20_ST_EXT_CTRL_OVERFLOW = 0x04, - AUDIO20_ST_EXT_CTRL_LATENCY = 0x05, +typedef enum { + AUDIO20_ST_EXT_CTRL_UNDEF = 0x00, + AUDIO20_ST_EXT_CTRL_ENABLE = 0x01, + AUDIO20_ST_EXT_CTRL_WIDTH = 0x02, + AUDIO20_ST_EXT_CTRL_UNDERFLOW = 0x03, + AUDIO20_ST_EXT_CTRL_OVERFLOW = 0x04, + AUDIO20_ST_EXT_CTRL_LATENCY = 0x05, } audio20_stereo_extender_control_selector_t; /// A.17.10 Extension Unit Control Selectors -typedef enum -{ - AUDIO20_XU_CTRL_UNDEF = 0x00, - AUDIO20_XU_CTRL_ENABLE = 0x01, - AUDIO20_XU_CTRL_CLUSTER = 0x02, - AUDIO20_XU_CTRL_UNDERFLOW = 0x03, - AUDIO20_XU_CTRL_OVERFLOW = 0x04, - AUDIO20_XU_CTRL_LATENCY = 0x05, +typedef enum { + AUDIO20_XU_CTRL_UNDEF = 0x00, + AUDIO20_XU_CTRL_ENABLE = 0x01, + AUDIO20_XU_CTRL_CLUSTER = 0x02, + AUDIO20_XU_CTRL_UNDERFLOW = 0x03, + AUDIO20_XU_CTRL_OVERFLOW = 0x04, + AUDIO20_XU_CTRL_LATENCY = 0x05, } audio20_extension_unit_control_selector_t; /// A.17.11 AudioStreaming Interface Control Selectors -typedef enum -{ - AUDIO20_AS_CTRL_UNDEF = 0x00, - AUDIO20_AS_CTRL_ACT_ALT_SETTING = 0x01, - AUDIO20_AS_CTRL_VAL_ALT_SETTINGS = 0x02, - AUDIO20_AS_CTRL_AUDIO_DATA_FORMAT = 0x03, +typedef enum { + AUDIO20_AS_CTRL_UNDEF = 0x00, + AUDIO20_AS_CTRL_ACT_ALT_SETTING = 0x01, + AUDIO20_AS_CTRL_VAL_ALT_SETTINGS = 0x02, + AUDIO20_AS_CTRL_AUDIO_DATA_FORMAT = 0x03, } audio20_audiostreaming_interface_control_selector_t; /// A.17.12 Encoder Control Selectors -typedef enum -{ - AUDIO20_EN_CTRL_UNDEF = 0x00, - AUDIO20_EN_CTRL_BIT_RATE = 0x01, - AUDIO20_EN_CTRL_QUALITY = 0x02, - AUDIO20_EN_CTRL_VBR = 0x03, - AUDIO20_EN_CTRL_TYPE = 0x04, - AUDIO20_EN_CTRL_UNDERFLOW = 0x05, - AUDIO20_EN_CTRL_OVERFLOW = 0x06, - AUDIO20_EN_CTRL_ENCODER_ERROR = 0x07, - AUDIO20_EN_CTRL_PARAM1 = 0x08, - AUDIO20_EN_CTRL_PARAM2 = 0x09, - AUDIO20_EN_CTRL_PARAM3 = 0x0A, - AUDIO20_EN_CTRL_PARAM4 = 0x0B, - AUDIO20_EN_CTRL_PARAM5 = 0x0C, - AUDIO20_EN_CTRL_PARAM6 = 0x0D, - AUDIO20_EN_CTRL_PARAM7 = 0x0E, - AUDIO20_EN_CTRL_PARAM8 = 0x0F, +typedef enum { + AUDIO20_EN_CTRL_UNDEF = 0x00, + AUDIO20_EN_CTRL_BIT_RATE = 0x01, + AUDIO20_EN_CTRL_QUALITY = 0x02, + AUDIO20_EN_CTRL_VBR = 0x03, + AUDIO20_EN_CTRL_TYPE = 0x04, + AUDIO20_EN_CTRL_UNDERFLOW = 0x05, + AUDIO20_EN_CTRL_OVERFLOW = 0x06, + AUDIO20_EN_CTRL_ENCODER_ERROR = 0x07, + AUDIO20_EN_CTRL_PARAM1 = 0x08, + AUDIO20_EN_CTRL_PARAM2 = 0x09, + AUDIO20_EN_CTRL_PARAM3 = 0x0A, + AUDIO20_EN_CTRL_PARAM4 = 0x0B, + AUDIO20_EN_CTRL_PARAM5 = 0x0C, + AUDIO20_EN_CTRL_PARAM6 = 0x0D, + AUDIO20_EN_CTRL_PARAM7 = 0x0E, + AUDIO20_EN_CTRL_PARAM8 = 0x0F, } audio20_encoder_control_selector_t; /// A.17.13 Decoder Control Selectors /// A.17.13.1 MPEG Decoder Control Selectors -typedef enum -{ - AUDIO20_MPD_CTRL_UNDEF = 0x00, - AUDIO20_MPD_CTRL_DUAL_CHANNEL = 0x01, - AUDIO20_MPD_CTRL_SECOND_STEREO = 0x02, - AUDIO20_MPD_CTRL_MULTILINGUAL = 0x03, - AUDIO20_MPD_CTRL_DYN_RANGE = 0x04, - AUDIO20_MPD_CTRL_SCALING = 0x05, - AUDIO20_MPD_CTRL_HILO_SCALING = 0x06, - AUDIO20_MPD_CTRL_UNDERFLOW = 0x07, - AUDIO20_MPD_CTRL_OVERFLOW = 0x08, - AUDIO20_MPD_CTRL_DECODER_ERROR = 0x09, +typedef enum { + AUDIO20_MPD_CTRL_UNDEF = 0x00, + AUDIO20_MPD_CTRL_DUAL_CHANNEL = 0x01, + AUDIO20_MPD_CTRL_SECOND_STEREO = 0x02, + AUDIO20_MPD_CTRL_MULTILINGUAL = 0x03, + AUDIO20_MPD_CTRL_DYN_RANGE = 0x04, + AUDIO20_MPD_CTRL_SCALING = 0x05, + AUDIO20_MPD_CTRL_HILO_SCALING = 0x06, + AUDIO20_MPD_CTRL_UNDERFLOW = 0x07, + AUDIO20_MPD_CTRL_OVERFLOW = 0x08, + AUDIO20_MPD_CTRL_DECODER_ERROR = 0x09, } audio20_MPEG_decoder_control_selector_t; /// A.17.13.2 AC-3 Decoder Control Selectors -typedef enum -{ - AUDIO20_AD_CTRL_UNDEF = 0x00, - AUDIO20_AD_CTRL_MODE = 0x01, - AUDIO20_AD_CTRL_DYN_RANGE = 0x02, - AUDIO20_AD_CTRL_SCALING = 0x03, - AUDIO20_AD_CTRL_HILO_SCALING = 0x04, - AUDIO20_AD_CTRL_UNDERFLOW = 0x05, - AUDIO20_AD_CTRL_OVERFLOW = 0x06, - AUDIO20_AD_CTRL_DECODER_ERROR = 0x07, +typedef enum { + AUDIO20_AD_CTRL_UNDEF = 0x00, + AUDIO20_AD_CTRL_MODE = 0x01, + AUDIO20_AD_CTRL_DYN_RANGE = 0x02, + AUDIO20_AD_CTRL_SCALING = 0x03, + AUDIO20_AD_CTRL_HILO_SCALING = 0x04, + AUDIO20_AD_CTRL_UNDERFLOW = 0x05, + AUDIO20_AD_CTRL_OVERFLOW = 0x06, + AUDIO20_AD_CTRL_DECODER_ERROR = 0x07, } audio20_AC3_decoder_control_selector_t; /// A.17.13.3 WMA Decoder Control Selectors -typedef enum -{ - AUDIO20_WD_CTRL_UNDEF = 0x00, - AUDIO20_WD_CTRL_UNDERFLOW = 0x01, - AUDIO20_WD_CTRL_OVERFLOW = 0x02, - AUDIO20_WD_CTRL_DECODER_ERROR = 0x03, +typedef enum { + AUDIO20_WD_CTRL_UNDEF = 0x00, + AUDIO20_WD_CTRL_UNDERFLOW = 0x01, + AUDIO20_WD_CTRL_OVERFLOW = 0x02, + AUDIO20_WD_CTRL_DECODER_ERROR = 0x03, } audio20_WMA_decoder_control_selector_t; /// A.17.13.4 DTS Decoder Control Selectors -typedef enum -{ - AUDIO20_DD_CTRL_UNDEF = 0x00, - AUDIO20_DD_CTRL_UNDERFLOW = 0x01, - AUDIO20_DD_CTRL_OVERFLOW = 0x02, - AUDIO20_DD_CTRL_DECODER_ERROR = 0x03, +typedef enum { + AUDIO20_DD_CTRL_UNDEF = 0x00, + AUDIO20_DD_CTRL_UNDERFLOW = 0x01, + AUDIO20_DD_CTRL_OVERFLOW = 0x02, + AUDIO20_DD_CTRL_DECODER_ERROR = 0x03, } audio20_DTS_decoder_control_selector_t; /// A.17.14 Endpoint Control Selectors -typedef enum -{ - AUDIO20_EP_CTRL_UNDEF = 0x00, - AUDIO20_EP_CTRL_PITCH = 0x01, - AUDIO20_EP_CTRL_DATA_OVERRUN = 0x02, - AUDIO20_EP_CTRL_DATA_UNDERRUN = 0x03, +typedef enum { + AUDIO20_EP_CTRL_UNDEF = 0x00, + AUDIO20_EP_CTRL_PITCH = 0x01, + AUDIO20_EP_CTRL_DATA_OVERRUN = 0x02, + AUDIO20_EP_CTRL_DATA_UNDERRUN = 0x03, } audio20_EP_control_selector_t; -/// Terminal Types - -/// 2.1 - Audio Class-Terminal Types UAC2 -typedef enum -{ - AUDIO20_TERM_TYPE_USB_UNDEFINED = 0x0100, - AUDIO20_TERM_TYPE_USB_STREAMING = 0x0101, - AUDIO20_TERM_TYPE_USB_VENDOR_SPEC = 0x01FF, -} audio20_terminal_type_t; - -/// 2.2 - Audio Class-Input Terminal Types UAC2 -typedef enum -{ - AUDIO20_TERM_TYPE_IN_UNDEFINED = 0x0200, - AUDIO20_TERM_TYPE_IN_GENERIC_MIC = 0x0201, - AUDIO20_TERM_TYPE_IN_DESKTOP_MIC = 0x0202, - AUDIO20_TERM_TYPE_IN_PERSONAL_MIC = 0x0203, - AUDIO20_TERM_TYPE_IN_OMNI_MIC = 0x0204, - AUDIO20_TERM_TYPE_IN_ARRAY_MIC = 0x0205, - AUDIO20_TERM_TYPE_IN_PROC_ARRAY_MIC = 0x0206, -} audio20_terminal_input_type_t; - -/// 2.3 - Audio Class-Output Terminal Types UAC2 -typedef enum -{ - AUDIO20_TERM_TYPE_OUT_UNDEFINED = 0x0300, - AUDIO20_TERM_TYPE_OUT_GENERIC_SPEAKER = 0x0301, - AUDIO20_TERM_TYPE_OUT_HEADPHONES = 0x0302, - AUDIO20_TERM_TYPE_OUT_HEAD_MNT_DISP_AUIDO = 0x0303, - AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER = 0x0304, - AUDIO20_TERM_TYPE_OUT_ROOM_SPEAKER = 0x0305, - AUDIO20_TERM_TYPE_OUT_COMMUNICATION_SPEAKER = 0x0306, - AUDIO20_TERM_TYPE_OUT_LOW_FRQ_EFFECTS_SPEAKER = 0x0307, -} audio20_terminal_output_type_t; - -/// Rest is yet to be implemented - /// Additional Audio Device Class Codes - Source: Audio Data Formats /// A.1 - Audio Class-Format Type Codes UAC2 -typedef enum -{ - AUDIO20_FORMAT_TYPE_UNDEFINED = 0x00, - AUDIO20_FORMAT_TYPE_I = 0x01, - AUDIO20_FORMAT_TYPE_II = 0x02, - AUDIO20_FORMAT_TYPE_III = 0x03, - AUDIO20_FORMAT_TYPE_IV = 0x04, - AUDIO20_EXT_FORMAT_TYPE_I = 0x81, - AUDIO20_EXT_FORMAT_TYPE_II = 0x82, - AUDIO20_EXT_FORMAT_TYPE_III = 0x83, +typedef enum { + AUDIO20_FORMAT_TYPE_UNDEFINED = 0x00, + AUDIO20_FORMAT_TYPE_I = 0x01, + AUDIO20_FORMAT_TYPE_II = 0x02, + AUDIO20_FORMAT_TYPE_III = 0x03, + AUDIO20_FORMAT_TYPE_IV = 0x04, + AUDIO20_EXT_FORMAT_TYPE_I = 0x81, + AUDIO20_EXT_FORMAT_TYPE_II = 0x82, + AUDIO20_EXT_FORMAT_TYPE_III = 0x83, } audio20_format_type_t; // A.2.1 - Audio Class-Audio Data Format Type I UAC2 -typedef enum -{ - AUDIO20_DATA_FORMAT_TYPE_I_PCM = (uint32_t) (1 << 0), - AUDIO20_DATA_FORMAT_TYPE_I_PCM8 = (uint32_t) (1 << 1), - AUDIO20_DATA_FORMAT_TYPE_I_IEEE_FLOAT = (uint32_t) (1 << 2), - AUDIO20_DATA_FORMAT_TYPE_I_ALAW = (uint32_t) (1 << 3), - AUDIO20_DATA_FORMAT_TYPE_I_MULAW = (uint32_t) (1 << 4), - AUDIO20_DATA_FORMAT_TYPE_I_RAW_DATA = 0x80000000u, +typedef enum { + AUDIO20_DATA_FORMAT_TYPE_I_PCM = (uint32_t) (1 << 0), + AUDIO20_DATA_FORMAT_TYPE_I_PCM8 = (uint32_t) (1 << 1), + AUDIO20_DATA_FORMAT_TYPE_I_IEEE_FLOAT = (uint32_t) (1 << 2), + AUDIO20_DATA_FORMAT_TYPE_I_ALAW = (uint32_t) (1 << 3), + AUDIO20_DATA_FORMAT_TYPE_I_MULAW = (uint32_t) (1 << 4), + AUDIO20_DATA_FORMAT_TYPE_I_RAW_DATA = 0x80000000u, } audio20_data_format_type_I_t; /// Audio Class-Audio Channel Configuration UAC2 (Table A-11) -typedef enum -{ - AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED = 0x00000000, - AUDIO20_CHANNEL_CONFIG_FRONT_LEFT = 0x00000001, - AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT = 0x00000002, - AUDIO20_CHANNEL_CONFIG_FRONT_CENTER = 0x00000004, - AUDIO20_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x00000008, - AUDIO20_CHANNEL_CONFIG_BACK_LEFT = 0x00000010, - AUDIO20_CHANNEL_CONFIG_BACK_RIGHT = 0x00000020, +typedef enum { + AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED = 0x00000000, + AUDIO20_CHANNEL_CONFIG_FRONT_LEFT = 0x00000001, + AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT = 0x00000002, + AUDIO20_CHANNEL_CONFIG_FRONT_CENTER = 0x00000004, + AUDIO20_CHANNEL_CONFIG_LOW_FRQ_EFFECTS = 0x00000008, + AUDIO20_CHANNEL_CONFIG_BACK_LEFT = 0x00000010, + AUDIO20_CHANNEL_CONFIG_BACK_RIGHT = 0x00000020, AUDIO20_CHANNEL_CONFIG_FRONT_LEFT_OF_CENTER = 0x00000040, AUDIO20_CHANNEL_CONFIG_FRONT_RIGHT_OF_CENTER = 0x00000080, - AUDIO20_CHANNEL_CONFIG_BACK_CENTER = 0x00000100, - AUDIO20_CHANNEL_CONFIG_SIDE_LEFT = 0x00000200, - AUDIO20_CHANNEL_CONFIG_SIDE_RIGHT = 0x00000400, - AUDIO20_CHANNEL_CONFIG_TOP_CENTER = 0x00000800, - AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT = 0x00001000, - AUDIO20_CHANNEL_CONFIG_TOP_FRONT_CENTER = 0x00002000, - AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT = 0x00004000, - AUDIO20_CHANNEL_CONFIG_TOP_BACK_LEFT = 0x00008000, - AUDIO20_CHANNEL_CONFIG_TOP_BACK_CENTER = 0x00010000, - AUDIO20_CHANNEL_CONFIG_TOP_BACK_RIGHT = 0x00020000, + AUDIO20_CHANNEL_CONFIG_BACK_CENTER = 0x00000100, + AUDIO20_CHANNEL_CONFIG_SIDE_LEFT = 0x00000200, + AUDIO20_CHANNEL_CONFIG_SIDE_RIGHT = 0x00000400, + AUDIO20_CHANNEL_CONFIG_TOP_CENTER = 0x00000800, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT = 0x00001000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_CENTER = 0x00002000, + AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT = 0x00004000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_LEFT = 0x00008000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_CENTER = 0x00010000, + AUDIO20_CHANNEL_CONFIG_TOP_BACK_RIGHT = 0x00020000, AUDIO20_CHANNEL_CONFIG_TOP_FRONT_LEFT_OF_CENTER = 0x00040000, AUDIO20_CHANNEL_CONFIG_TOP_FRONT_RIGHT_OF_CENTER = 0x00080000, AUDIO20_CHANNEL_CONFIG_LEFT_LOW_FRQ_EFFECTS = 0x00100000, AUDIO20_CHANNEL_CONFIG_RIGHT_LOW_FRQ_EFFECTS = 0x00200000, - AUDIO20_CHANNEL_CONFIG_TOP_SIDE_LEFT = 0x00400000, - AUDIO20_CHANNEL_CONFIG_TOP_SIDE_RIGHT = 0x00800000, - AUDIO20_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, - AUDIO20_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, + AUDIO20_CHANNEL_CONFIG_TOP_SIDE_LEFT = 0x00400000, + AUDIO20_CHANNEL_CONFIG_TOP_SIDE_RIGHT = 0x00800000, + AUDIO20_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, + AUDIO20_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, AUDIO20_CHANNEL_CONFIG_BACK_RIGHT_OF_CENTER = 0x04000000, - AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000, + AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000, } audio20_channel_config_t; /// All remaining definitions are taken from the descriptor descriptions in the UAC2 main specification /// Audio Class-Control Values UAC2 -typedef enum -{ - AUDIO20_CTRL_NONE = 0x00, ///< No Host access - AUDIO20_CTRL_R = 0x01, ///< Host read access only - AUDIO20_CTRL_RW = 0x03, ///< Host read write access +typedef enum { + AUDIO20_CTRL_NONE = 0x00,///< No Host access + AUDIO20_CTRL_R = 0x01, ///< Host read access only + AUDIO20_CTRL_RW = 0x03, ///< Host read write access } audio20_control_t; /// Audio Class-Specific AC Interface Descriptor Controls UAC2 -typedef enum -{ - AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS = 0, +typedef enum { + AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS = 0, } audio20_cs_ac_interface_control_pos_t; /// Audio Class-Specific AS Interface Descriptor Controls UAC2 -typedef enum -{ - AUDIO20_CS_AS_INTERFACE_CTRL_ACTIVE_ALT_SET_POS = 0, - AUDIO20_CS_AS_INTERFACE_CTRL_VALID_ALT_SET_POS = 2, +typedef enum { + AUDIO20_CS_AS_INTERFACE_CTRL_ACTIVE_ALT_SET_POS = 0, + AUDIO20_CS_AS_INTERFACE_CTRL_VALID_ALT_SET_POS = 2, } audio20_cs_as_interface_control_pos_t; /// Audio Class-Specific AS Isochronous Data EP Attributes UAC2 -typedef enum -{ - AUDIO20_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, - AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, +typedef enum { + AUDIO20_CS_AS_ISO_DATA_EP_ATT_MAX_PACKETS_ONLY = 0x80, + AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK = 0x00, } audio20_cs_as_iso_data_ep_attribute_t; /// Audio Class-Specific AS Isochronous Data EP Controls UAC2 -typedef enum -{ - AUDIO20_CS_AS_ISO_DATA_EP_CTRL_PITCH_POS = 0, - AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_OVERRUN_POS = 2, - AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_UNDERRUN_POS = 4, +typedef enum { + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_PITCH_POS = 0, + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_OVERRUN_POS = 2, + AUDIO20_CS_AS_ISO_DATA_EP_CTRL_DATA_UNDERRUN_POS = 4, } audio20_cs_as_iso_data_ep_control_pos_t; /// Audio Class-Specific AS Isochronous Data EP Lock Delay Units UAC2 -typedef enum -{ - AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, - AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, - AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, +typedef enum { + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED = 0x00, + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC = 0x01, + AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_PCM_SAMPLES = 0x02, } audio20_cs_as_iso_data_ep_lock_delay_unit_t; /// Audio Class-Clock Source Attributes UAC2 -typedef enum -{ - AUDIO20_CLOCK_SOURCE_ATT_EXT_CLK = 0x00, - AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK = 0x01, - AUDIO20_CLOCK_SOURCE_ATT_INT_VAR_CLK = 0x02, - AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK = 0x03, - AUDIO20_CLOCK_SOURCE_ATT_CLK_SYC_SOF = 0x04, +typedef enum { + AUDIO20_CLOCK_SOURCE_ATT_EXT_CLK = 0x00, + AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK = 0x01, + AUDIO20_CLOCK_SOURCE_ATT_INT_VAR_CLK = 0x02, + AUDIO20_CLOCK_SOURCE_ATT_INT_PRO_CLK = 0x03, + AUDIO20_CLOCK_SOURCE_ATT_CLK_SYC_SOF = 0x04, } audio20_clock_source_attribute_t; /// Audio Class-Clock Source Controls UAC2 -typedef enum -{ - AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS = 0, - AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS = 2, +typedef enum { + AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS = 0, + AUDIO20_CLOCK_SOURCE_CTRL_CLK_VAL_POS = 2, } audio20_clock_source_control_pos_t; /// Audio Class-Clock Selector Controls UAC2 -typedef enum -{ - AUDIO20_CLOCK_SELECTOR_CTRL_POS = 0, +typedef enum { + AUDIO20_CLOCK_SELECTOR_CTRL_POS = 0, } audio20_clock_selector_control_pos_t; /// Audio Class-Clock Multiplier Controls UAC2 -typedef enum -{ - AUDIO20_CLOCK_MULTIPLIER_CTRL_NUMERATOR_POS = 0, - AUDIO20_CLOCK_MULTIPLIER_CTRL_DENOMINATOR_POS = 2, +typedef enum { + AUDIO20_CLOCK_MULTIPLIER_CTRL_NUMERATOR_POS = 0, + AUDIO20_CLOCK_MULTIPLIER_CTRL_DENOMINATOR_POS = 2, } audio20_clock_multiplier_control_pos_t; /// Audio Class-Input Terminal Controls UAC2 -typedef enum -{ - AUDIO20_IN_TERM_CTRL_CPY_PROT_POS = 0, - AUDIO20_IN_TERM_CTRL_CONNECTOR_POS = 2, - AUDIO20_IN_TERM_CTRL_OVERLOAD_POS = 4, - AUDIO20_IN_TERM_CTRL_CLUSTER_POS = 6, - AUDIO20_IN_TERM_CTRL_UNDERFLOW_POS = 8, - AUDIO20_IN_TERM_CTRL_OVERFLOW_POS = 10, +typedef enum { + AUDIO20_IN_TERM_CTRL_CPY_PROT_POS = 0, + AUDIO20_IN_TERM_CTRL_CONNECTOR_POS = 2, + AUDIO20_IN_TERM_CTRL_OVERLOAD_POS = 4, + AUDIO20_IN_TERM_CTRL_CLUSTER_POS = 6, + AUDIO20_IN_TERM_CTRL_UNDERFLOW_POS = 8, + AUDIO20_IN_TERM_CTRL_OVERFLOW_POS = 10, } audio20_terminal_input_control_pos_t; /// Audio Class-Output Terminal Controls UAC2 -typedef enum -{ - AUDIO20_OUT_TERM_CTRL_CPY_PROT_POS = 0, - AUDIO20_OUT_TERM_CTRL_CONNECTOR_POS = 2, - AUDIO20_OUT_TERM_CTRL_OVERLOAD_POS = 4, - AUDIO20_OUT_TERM_CTRL_UNDERFLOW_POS = 6, - AUDIO20_OUT_TERM_CTRL_OVERFLOW_POS = 8, +typedef enum { + AUDIO20_OUT_TERM_CTRL_CPY_PROT_POS = 0, + AUDIO20_OUT_TERM_CTRL_CONNECTOR_POS = 2, + AUDIO20_OUT_TERM_CTRL_OVERLOAD_POS = 4, + AUDIO20_OUT_TERM_CTRL_UNDERFLOW_POS = 6, + AUDIO20_OUT_TERM_CTRL_OVERFLOW_POS = 8, } audio20_terminal_output_control_pos_t; /// Audio Class-Feature Unit Controls UAC2 -typedef enum -{ - AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS = 0, - AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS = 2, - AUDIO20_FEATURE_UNIT_CTRL_BASS_POS = 4, - AUDIO20_FEATURE_UNIT_CTRL_MID_POS = 6, - AUDIO20_FEATURE_UNIT_CTRL_TREBLE_POS = 8, - AUDIO20_FEATURE_UNIT_CTRL_GRAPHIC_EQU_POS = 10, - AUDIO20_FEATURE_UNIT_CTRL_AGC_POS = 12, - AUDIO20_FEATURE_UNIT_CTRL_DELAY_POS = 14, - AUDIO20_FEATURE_UNIT_CTRL_BASS_BOOST_POS = 16, - AUDIO20_FEATURE_UNIT_CTRL_LOUDNESS_POS = 18, - AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_POS = 20, - AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_PAD_POS = 22, - AUDIO20_FEATURE_UNIT_CTRL_PHASE_INV_POS = 24, - AUDIO20_FEATURE_UNIT_CTRL_UNDERFLOW_POS = 26, - AUDIO20_FEATURE_UNIT_CTRL_OVERFLOW_POS = 28, +typedef enum { + AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS = 0, + AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS = 2, + AUDIO20_FEATURE_UNIT_CTRL_BASS_POS = 4, + AUDIO20_FEATURE_UNIT_CTRL_MID_POS = 6, + AUDIO20_FEATURE_UNIT_CTRL_TREBLE_POS = 8, + AUDIO20_FEATURE_UNIT_CTRL_GRAPHIC_EQU_POS = 10, + AUDIO20_FEATURE_UNIT_CTRL_AGC_POS = 12, + AUDIO20_FEATURE_UNIT_CTRL_DELAY_POS = 14, + AUDIO20_FEATURE_UNIT_CTRL_BASS_BOOST_POS = 16, + AUDIO20_FEATURE_UNIT_CTRL_LOUDNESS_POS = 18, + AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_POS = 20, + AUDIO20_FEATURE_UNIT_CTRL_INPUT_GAIN_PAD_POS = 22, + AUDIO20_FEATURE_UNIT_CTRL_PHASE_INV_POS = 24, + AUDIO20_FEATURE_UNIT_CTRL_UNDERFLOW_POS = 26, + AUDIO20_FEATURE_UNIT_CTRL_OVERFLOW_POS = 28, } audio20_feature_unit_control_pos_t; //--------------------------------------------------------------------+ @@ -1048,282 +1013,276 @@ typedef enum /// AUDIO Channel Cluster Descriptor UAC2 (4.1) typedef struct TU_ATTR_PACKED { - uint8_t bNrChannels; ///< Number of channels currently connected. - audio20_channel_config_t bmChannelConfig; ///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. - uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first inserted channel with a non-predefined spatial location. + uint8_t bNrChannels; ///< Number of channels currently connected. + audio20_channel_config_t bmChannelConfig;///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first inserted channel with a non-predefined spatial location. } audio20_desc_channel_cluster_t; /// AUDIO Class-Specific AC Interface Header Descriptor UAC2 (4.7.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 9. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_HEADER. - uint16_t bcdADC ; ///< Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: U16_TO_U8S_LE(0x0200). - uint8_t bCategory ; ///< Constant, indicating the primary use of this audio function, as intended by the manufacturer. See: audio20_function_code_t. - uint16_t wTotalLength ; ///< Total number of bytes returned for the class-specific AudioControl interface descriptor. Includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors. - uint8_t bmControls ; ///< See: audio20_cs_ac_interface_control_pos_t. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 9. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_HEADER. + uint16_t bcdADC; ///< Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: U16_TO_U8S_LE(0x0200). + uint8_t bCategory; ///< Constant, indicating the primary use of this audio function, as intended by the manufacturer. See: audio20_function_code_t. + uint16_t wTotalLength; ///< Total number of bytes returned for the class-specific AudioControl interface descriptor. Includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors. + uint8_t bmControls; ///< See: audio20_cs_ac_interface_control_pos_t. } audio20_desc_cs_ac_interface_t; TU_VERIFY_STATIC(sizeof(audio20_desc_cs_ac_interface_t) == 9, "size is not correct"); /// AUDIO Clock Source Descriptor UAC2 (4.7.2.1) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor in bytes: 8. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE. - uint8_t bClockID ; ///< Constant uniquely identifying the Clock Source Entity within the audio function. This value is used in all requests to address this Entity. - uint8_t bmAttributes ; ///< See: audio20_clock_source_attribute_t. - uint8_t bmControls ; ///< See: audio20_clock_source_control_pos_t. - uint8_t bAssocTerminal ; ///< Terminal ID of the Terminal that is associated with this Clock Source. - uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Source Entity. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor in bytes: 8. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE. + uint8_t bClockID; ///< Constant uniquely identifying the Clock Source Entity within the audio function. This value is used in all requests to address this Entity. + uint8_t bmAttributes; ///< See: audio20_clock_source_attribute_t. + uint8_t bmControls; ///< See: audio20_clock_source_control_pos_t. + uint8_t bAssocTerminal; ///< Terminal ID of the Terminal that is associated with this Clock Source. + uint8_t iClockSource; ///< Index of a string descriptor, describing the Clock Source Entity. } audio20_desc_clock_source_t; /// AUDIO Clock Selector Descriptor UAC2 (4.7.2.2) for ONE pin -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 7+p. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR. - uint8_t bClockID ; ///< Constant uniquely identifying the Clock Selector Entity within the audio function. This value is used in all requests to address this Entity. - uint8_t bNrInPins ; ///< Number of Input Pins of this Unit: p = 1 thus bNrInPins = 1. - uint8_t baCSourceID ; ///< ID of the Clock Entity to which the first Clock Input Pin of this Clock Selector Entity is connected.. - uint8_t bmControls ; ///< See: audio20_clock_selector_control_pos_t. - uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Selector Entity. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 7+p. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_SELECTOR. + uint8_t bClockID; ///< Constant uniquely identifying the Clock Selector Entity within the audio function. This value is used in all requests to address this Entity. + uint8_t bNrInPins; ///< Number of Input Pins of this Unit: p = 1 thus bNrInPins = 1. + uint8_t baCSourceID; ///< ID of the Clock Entity to which the first Clock Input Pin of this Clock Selector Entity is connected.. + uint8_t bmControls; ///< See: audio20_clock_selector_control_pos_t. + uint8_t iClockSource; ///< Index of a string descriptor, describing the Clock Selector Entity. } audio20_desc_clock_selector_t; /// AUDIO Clock Selector Descriptor (4.7.2.2) for multiple pins #define audio20_desc_clock_selector_n_t(source_num) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; \ - uint8_t bDescriptorType ; \ - uint8_t bDescriptorSubType ; \ - uint8_t bClockID ; \ - uint8_t bNrInPins ; \ - struct TU_ATTR_PACKED { \ - uint8_t baSourceID ; \ - } sourceID[source_num] ; \ - uint8_t bmControls ; \ - uint8_t iClockSource ; \ -} + struct TU_ATTR_PACKED { \ + uint8_t bLength; \ + uint8_t bDescriptorType; \ + uint8_t bDescriptorSubType; \ + uint8_t bClockID; \ + uint8_t bNrInPins; \ + struct TU_ATTR_PACKED { \ + uint8_t baSourceID; \ + } sourceID[source_num]; \ + uint8_t bmControls; \ + uint8_t iClockSource; \ + } /// AUDIO Clock Multiplier Descriptor UAC2 (4.7.2.3) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 7. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER. - uint8_t bClockID ; ///< Constant uniquely identifying the Clock Multiplier Entity within the audio function. This value is used in all requests to address this Entity. - uint8_t bCSourceID ; ///< ID of the Clock Entity to which the last Clock Input Pin of this Clock Selector Entity is connected. - uint8_t bmControls ; ///< See: audio20_clock_multiplier_control_pos_t. - uint8_t iClockSource ; ///< Index of a string descriptor, describing the Clock Multiplier Entity. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 7. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_CLOCK_MULTIPLIER. + uint8_t bClockID; ///< Constant uniquely identifying the Clock Multiplier Entity within the audio function. This value is used in all requests to address this Entity. + uint8_t bCSourceID; ///< ID of the Clock Entity to which the last Clock Input Pin of this Clock Selector Entity is connected. + uint8_t bmControls; ///< See: audio20_clock_multiplier_control_pos_t. + uint8_t iClockSource; ///< Index of a string descriptor, describing the Clock Multiplier Entity. } audio20_desc_clock_multiplier_t; /// AUDIO Input Terminal Descriptor(4.7.2.4) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 17. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_INPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this terminal. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. See: audio_terminal_type_t for USB streaming and audio_terminal_input_type_t for other input types. - uint8_t bAssocTerminal ; ///< ID of the Output Terminal to which this Input Terminal is associated. - uint8_t bCSourceID ; ///< ID of the Clock Entity to which this Input Terminal is connected. - uint8_t bNrChannels ; ///< Number of logical output channels in the Terminal’s output audio channel cluster. - uint32_t bmChannelConfig ; ///< Describes the spatial location of the logical channels. See:audio20_channel_config_t. - uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first logical channel. - uint16_t bmControls ; ///< See: audio_terminal_input_control_pos_t. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Input Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 17. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO_CS_AC_INTERFACE_INPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this terminal. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. See: audio_terminal_type_t for USB streaming and audio_terminal_input_type_t for other input types. + uint8_t bAssocTerminal; ///< ID of the Output Terminal to which this Input Terminal is associated. + uint8_t bCSourceID; ///< ID of the Clock Entity to which this Input Terminal is connected. + uint8_t bNrChannels; ///< Number of logical output channels in the Terminal’s output audio channel cluster. + uint32_t bmChannelConfig; ///< Describes the spatial location of the logical channels. See:audio20_channel_config_t. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first logical channel. + uint16_t bmControls; ///< See: audio_terminal_input_control_pos_t. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Input Terminal. } audio20_desc_input_terminal_t; /// AUDIO Output Terminal Descriptor UAC2 (4.7.2.5) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 12. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL. - uint8_t bTerminalID ; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this Terminal. - uint16_t wTerminalType ; ///< Constant characterizing the type of Terminal. See: audio20_terminal_type_t for USB streaming and audio20_terminal_output_type_t for other output types. - uint8_t bAssocTerminal ; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. - uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Terminal is connected. - uint8_t bCSourceID ; ///< ID of the Clock Entity to which this Output Terminal is connected. - uint16_t bmControls ; ///< See: audio20_terminal_output_control_pos_t. - uint8_t iTerminal ; ///< Index of a string descriptor, describing the Output Terminal. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 12. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL. + uint8_t bTerminalID; ///< Constant uniquely identifying the Terminal within the audio function. This value is used in all requests to address this Terminal. + uint16_t wTerminalType; ///< Constant characterizing the type of Terminal. See: audio20_terminal_type_t for USB streaming and audio20_terminal_output_type_t for other output types. + uint8_t bAssocTerminal; ///< Constant, identifying the Input Terminal to which this Output Terminal is associated. + uint8_t bSourceID; ///< ID of the Unit or Terminal to which this Terminal is connected. + uint8_t bCSourceID; ///< ID of the Clock Entity to which this Output Terminal is connected. + uint16_t bmControls; ///< See: audio20_terminal_output_control_pos_t. + uint8_t iTerminal; ///< Index of a string descriptor, describing the Output Terminal. } audio20_desc_output_terminal_t; /// AUDIO Feature Unit Descriptor UAC2 (4.7.2.8) for ONE channel -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 14. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT. - uint8_t bUnitID ; ///< Constant uniquely identifying the Unit within the audio function. This value is used in all requests to address this Unit. - uint8_t bSourceID ; ///< ID of the Unit or Terminal to which this Feature Unit is connected. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 14. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT. + uint8_t bUnitID; ///< Constant uniquely identifying the Unit within the audio function. This value is used in all requests to address this Unit. + uint8_t bSourceID; ///< ID of the Unit or Terminal to which this Feature Unit is connected. struct TU_ATTR_PACKED { - uint32_t bmaControls ; ///< See: audio20_feature_unit_control_pos_t. Controls0 is master channel 0 (always present) and Controls1 is logical channel 1. - } controls[2] ; - uint8_t iTerminal ; ///< Index of a string descriptor, describing this Feature Unit. + uint32_t bmaControls;///< See: audio20_feature_unit_control_pos_t. Controls0 is master channel 0 (always present) and Controls1 is logical channel 1. + } controls[2]; + uint8_t iTerminal;///< Index of a string descriptor, describing this Feature Unit. } audio20_desc_feature_unit_t; /// AUDIO Feature Unit Descriptor(4.7.2.8) for multiple channels -#define audio20_desc_feature_unit_n_t(ch_num)\ - struct TU_ATTR_PACKED { \ - uint8_t bLength ; /* 6+(ch_num+1)*4 */\ - uint8_t bDescriptorType ; \ - uint8_t bDescriptorSubType ; \ - uint8_t bUnitID ; \ - uint8_t bSourceID ; \ - struct TU_ATTR_PACKED { \ - uint32_t bmaControls ; \ - } controls[ch_num+1] ; \ - uint8_t iTerminal ; \ -} +#define audio20_desc_feature_unit_n_t(ch_num) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* 6+(ch_num+1)*4 */ \ + uint8_t bDescriptorType; \ + uint8_t bDescriptorSubType; \ + uint8_t bUnitID; \ + uint8_t bSourceID; \ + struct TU_ATTR_PACKED { \ + uint32_t bmaControls; \ + } controls[ch_num + 1]; \ + uint8_t iTerminal; \ + } /// AUDIO Class-Specific AS Interface Descriptor(4.9.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 16. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_AS_GENERAL. - uint8_t bTerminalLink ; ///< The Terminal ID of the Terminal to which this interface is connected. - uint8_t bmControls ; ///< See: audio20_cs_as_interface_control_pos_t. - uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. See: audio20_format_type_t. - uint32_t bmFormats ; ///< The Audio Data Format(s) that can be used to communicate with this interface.See: audio20_data_format_type_I_t. - uint8_t bNrChannels ; ///< Number of physical channels in the AS Interface audio channel cluster. - uint32_t bmChannelConfig ; ///< Describes the spatial location of the physical channels. See: audio20_channel_config_t. - uint8_t iChannelNames ; ///< Index of a string descriptor, describing the name of the first physical channel. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 16. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_AS_GENERAL. + uint8_t bTerminalLink; ///< The Terminal ID of the Terminal to which this interface is connected. + uint8_t bmControls; ///< See: audio20_cs_as_interface_control_pos_t. + uint8_t bFormatType; ///< Constant identifying the Format Type the AudioStreaming interface is using. See: audio20_format_type_t. + uint32_t bmFormats; ///< The Audio Data Format(s) that can be used to communicate with this interface.See: audio20_data_format_type_I_t. + uint8_t bNrChannels; ///< Number of physical channels in the AS Interface audio channel cluster. + uint32_t bmChannelConfig; ///< Describes the spatial location of the physical channels. See: audio20_channel_config_t. + uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first physical channel. } audio20_desc_cs_as_interface_t; /// AUDIO Type I Format Type Descriptor(2.3.1.6 - Audio Formats) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 6. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE. - uint8_t bFormatType ; ///< Constant identifying the Format Type the AudioStreaming interface is using. Value: AUDIO20_FORMAT_TYPE_I. - uint8_t bSubslotSize ; ///< The number of bytes occupied by one audio subslot. Can be 1, 2, 3 or 4. - uint8_t bBitResolution ; ///< The number of effectively used bits from the available bits in an audio subslot. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 6. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE. + uint8_t bFormatType; ///< Constant identifying the Format Type the AudioStreaming interface is using. Value: AUDIO20_FORMAT_TYPE_I. + uint8_t bSubslotSize; ///< The number of bytes occupied by one audio subslot. Can be 1, 2, 3 or 4. + uint8_t bBitResolution; ///< The number of effectively used bits from the available bits in an audio subslot. } audio20_desc_type_I_format_t; /// AUDIO Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) -typedef struct TU_ATTR_PACKED -{ - uint8_t bLength ; ///< Size of this descriptor, in bytes: 8. - uint8_t bDescriptorType ; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. - uint8_t bDescriptorSubType ; ///< Descriptor SubType. Value: AUDIO20_CS_EP_SUBTYPE_GENERAL. - uint8_t bmAttributes ; ///< See: audio20_cs_as_iso_data_ep_attribute_t. - uint8_t bmControls ; ///< See: audio20_cs_as_iso_data_ep_control_pos_t. - uint8_t bLockDelayUnits ; ///< Indicates the units used for the wLockDelay field. See: audio20_cs_as_iso_data_ep_lock_delay_unit_t. - uint16_t wLockDelay ; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. Units used depend on the value of the bLockDelayUnits field. +typedef struct TU_ATTR_PACKED { + uint8_t bLength; ///< Size of this descriptor, in bytes: 8. + uint8_t bDescriptorType; ///< Descriptor Type. Value: TUSB_DESC_CS_ENDPOINT. + uint8_t bDescriptorSubType;///< Descriptor SubType. Value: AUDIO20_CS_EP_SUBTYPE_GENERAL. + uint8_t bmAttributes; ///< See: audio20_cs_as_iso_data_ep_attribute_t. + uint8_t bmControls; ///< See: audio20_cs_as_iso_data_ep_control_pos_t. + uint8_t bLockDelayUnits; ///< Indicates the units used for the wLockDelay field. See: audio20_cs_as_iso_data_ep_lock_delay_unit_t. + uint16_t wLockDelay; ///< Indicates the time it takes this endpoint to reliably lock its internal clock recovery circuitry. Units used depend on the value of the bLockDelayUnits field. } audio20_desc_cs_as_iso_data_ep_t; // 5.2.2 Control Request Layout -typedef struct TU_ATTR_PACKED -{ - union - { - struct TU_ATTR_PACKED - { - uint8_t recipient : 5; ///< Recipient type tusb_request_recipient_t. - uint8_t type : 2; ///< Request type tusb_request_type_t. - uint8_t direction : 1; ///< Direction type. tusb_dir_t - } bmRequestType_bit; - - uint8_t bmRequestType; - }; +typedef struct TU_ATTR_PACKED { + union { + struct TU_ATTR_PACKED { + uint8_t recipient : 5;///< Recipient type tusb_request_recipient_t. + uint8_t type : 2; ///< Request type tusb_request_type_t. + uint8_t direction : 1;///< Direction type. tusb_dir_t + } bmRequestType_bit; + + uint8_t bmRequestType; + }; - uint8_t bRequest; ///< Request type audio_cs_req_t - uint8_t bChannelNumber; - uint8_t bControlSelector; - union - { - uint8_t bInterface; - uint8_t bEndpoint; - }; - uint8_t bEntityID; - uint16_t wLength; + uint8_t bRequest;///< Request type audio_cs_req_t + uint8_t bChannelNumber; + uint8_t bControlSelector; + union { + uint8_t bInterface; + uint8_t bEndpoint; + }; + uint8_t bEntityID; + uint16_t wLength; } audio20_control_request_t; //// 5.2.3 Control Request Parameter Block Layout // 5.2.3.1 1-byte Control CUR Parameter Block -typedef struct TU_ATTR_PACKED -{ - int8_t bCur ; ///< The setting for the CUR attribute of the addressed Control +typedef struct TU_ATTR_PACKED { + int8_t bCur;///< The setting for the CUR attribute of the addressed Control } audio20_control_cur_1_t; // 5.2.3.2 2-byte Control CUR Parameter Block -typedef struct TU_ATTR_PACKED -{ - int16_t bCur ; ///< The setting for the CUR attribute of the addressed Control +typedef struct TU_ATTR_PACKED { + int16_t bCur;///< The setting for the CUR attribute of the addressed Control } audio20_control_cur_2_t; // 5.2.3.3 4-byte Control CUR Parameter Block -typedef struct TU_ATTR_PACKED -{ - int32_t bCur ; ///< The setting for the CUR attribute of the addressed Control +typedef struct TU_ATTR_PACKED { + int32_t bCur;///< The setting for the CUR attribute of the addressed Control } audio20_control_cur_4_t; // Use the following ONLY for RECEIVED data - compiler does not know how many subranges are defined! Use the #define macros below for predefined lengths. // 5.2.3.1 1-byte Control RANGE Parameter Block -#define audio20_control_range_1_n_t(numSubRanges) \ - struct TU_ATTR_PACKED { \ - uint16_t wNumSubRanges; \ - struct TU_ATTR_PACKED { \ - int8_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/\ - int8_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/\ - uint8_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/\ - } subrange[numSubRanges] ; \ -} +#define audio20_control_range_1_n_t(numSubRanges) \ + struct TU_ATTR_PACKED { \ + uint16_t wNumSubRanges; \ + struct TU_ATTR_PACKED { \ + int8_t bMin; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ \ + int8_t bMax; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ \ + uint8_t bRes; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ \ + } subrange[numSubRanges]; \ + } /// 5.2.3.2 2-byte Control RANGE Parameter Block -#define audio20_control_range_2_n_t(numSubRanges) \ - struct TU_ATTR_PACKED { \ - uint16_t wNumSubRanges; \ - struct TU_ATTR_PACKED { \ - int16_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/\ - int16_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/\ - uint16_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/\ - } subrange[numSubRanges]; \ -} +#define audio20_control_range_2_n_t(numSubRanges) \ + struct TU_ATTR_PACKED { \ + uint16_t wNumSubRanges; \ + struct TU_ATTR_PACKED { \ + int16_t bMin; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ \ + int16_t bMax; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ \ + uint16_t bRes; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ \ + } subrange[numSubRanges]; \ + } // 5.2.3.3 4-byte Control RANGE Parameter Block -#define audio20_control_range_4_n_t(numSubRanges) \ - struct TU_ATTR_PACKED { \ - uint16_t wNumSubRanges; \ - struct TU_ATTR_PACKED { \ - int32_t bMin ; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/\ - int32_t bMax ; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/\ - uint32_t bRes ; /*The setting for the RES attribute of the nth subrange of the addressed Control*/\ - } subrange[numSubRanges]; \ -} +#define audio20_control_range_4_n_t(numSubRanges) \ + struct TU_ATTR_PACKED { \ + uint16_t wNumSubRanges; \ + struct TU_ATTR_PACKED { \ + int32_t bMin; /*The setting for the MIN attribute of the nth subrange of the addressed Control*/ \ + int32_t bMax; /*The setting for the MAX attribute of the nth subrange of the addressed Control*/ \ + uint32_t bRes; /*The setting for the RES attribute of the nth subrange of the addressed Control*/ \ + } subrange[numSubRanges]; \ + } // 6.1 Interrupt Data Message Format -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { uint8_t bInfo; uint8_t bAttribute; - union - { + union { uint16_t wValue; - struct - { + struct { uint8_t wValue_cn_or_mcn; uint8_t wValue_cs; }; }; - union - { + union { uint16_t wIndex; - struct - { + struct { uint8_t wIndex_ep_or_int; uint8_t wIndex_entity_id; }; }; } audio20_interrupt_data_t; +//--------------------------------------------------------------------+ +// APPLICATION HELPER DEFINITIONS +//--------------------------------------------------------------------+ + +// Combined Interrupt Data Message Format for both UAC1 and UAC2 +typedef union { + audio10_interrupt_data_t v1; + audio20_interrupt_data_t v2; +} audio_interrupt_data_t; + +// MIDI1.0 use the same CS AC Interface Descriptor as UAC1 +typedef audio10_desc_cs_ac_interface_n_t(1) midi10_desc_cs_ac_interface_t; + +// UAC1.0 AC Interface Descriptor with 1 interface, used to read fields other than baInterfaceNr +typedef audio10_desc_cs_ac_interface_n_t(1) audio10_desc_cs_ac_interface_1_t; + /** @} */ #ifdef __cplusplus diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index f795603c5..f56a27fd3 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -938,7 +938,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint } } } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL) { - if (tu_unaligned_read16(p_desc + 4) == AUDIO20_TERM_TYPE_USB_STREAMING) { + if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { _audiod_fct[i].bclock_id_tx = p_desc[8]; } } @@ -1090,7 +1090,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p // Open new EP if necessary - EPs are only to be closed or opened for AS interfaces - Look for AS interface with correct alternate interface uint8_t const *p_desc = tu_desc_next(audio->p_desc); // Skip entire AC descriptor block - p_desc += ((audio_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; // Get pointer at end uint8_t const *p_desc_end = audio->p_desc + audio->desc_length - TUD_AUDIO_DESC_IAD_LEN; diff --git a/src/class/midi/midi_host.c b/src/class/midi/midi_host.c index 46b8284ee..8b78fe945 100644 --- a/src/class/midi/midi_host.c +++ b/src/class/midi/midi_host.c @@ -93,8 +93,6 @@ typedef struct { static midih_interface_t _midi_host[CFG_TUH_MIDI]; CFG_TUH_MEM_SECTION static midih_epbuf_t _midi_epbuf[CFG_TUH_MIDI]; -typedef audio10_desc_cs_ac_interface_n_t(1) midi10_desc_cs_ac_interface_t; - //--------------------------------------------------------------------+ // Helper //--------------------------------------------------------------------+ @@ -226,7 +224,7 @@ bool midih_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *d p_desc = tu_desc_next(p_desc); TU_VERIFY(tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && - tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_HEADER); + tu_desc_subtype(p_desc) == AUDIO10_CS_AC_INTERFACE_HEADER); desc_cb.desc_audio_control = desc_itf; p_desc = tu_desc_next(p_desc); diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 9c4699362..a9997ad3f 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -45,6 +45,13 @@ #define U16_TO_U8S_BE(_u16) TU_U16_HIGH(_u16), TU_U16_LOW(_u16) #define U16_TO_U8S_LE(_u16) TU_U16_LOW(_u16), TU_U16_HIGH(_u16) +#define TU_U24(_high, _mid, _low) ((uint32_t) (((_high) << 16) | ((_mid) << 8) | (_low))) +#define TU_U24_HIGH(_u24) ((uint8_t) (((_u24) >> 16) & 0x0000ff)) +#define TU_U24_MID(_u24) ((uint8_t) (((_u24) >> 8) & 0x0000ff)) +#define TU_U24_LOW(_u24) ((uint8_t) (((_u24) ) & 0x0000ff)) +#define U24_TO_U8S_BE(_u24) TU_U24_HIGH(_u24), TU_U24_MID(_u24), TU_U24_LOW(_u24) +#define U24_TO_U8S_LE(_u24) TU_U24_LOW(_u24), TU_U24_MID(_u24), TU_U24_HIGH(_u24) + #define TU_U32_BYTE3(_u32) ((uint8_t) ((((uint32_t) _u32) >> 24) & 0x000000ff)) // MSB #define TU_U32_BYTE2(_u32) ((uint8_t) ((((uint32_t) _u32) >> 16) & 0x000000ff)) #define TU_U32_BYTE1(_u32) ((uint8_t) ((((uint32_t) _u32) >> 8) & 0x000000ff)) diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 9b33a6f61..b0dae6488 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -118,6 +118,18 @@ #define _TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s _TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) #define _TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s _TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) +// Apply an macro X to each of the arguments and expand the result wtih comma +#define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(_TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) + +#define _TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) +#define _TU_ARGS_APPLY_EXPAND_2(_X, _a1, _a2) _X(_a1), _X(_a2) +#define _TU_ARGS_APPLY_EXPAND_3(_X, _a1, _a2, _a3) _X(_a1), _TU_ARGS_APPLY_EXPAND_2(_X, _a2, _a3) +#define _TU_ARGS_APPLY_EXPAND_4(_X, _a1, _a2, _a3, _a4) _X(_a1), _TU_ARGS_APPLY_EXPAND_3(_X, _a2, _a3, _a4) +#define _TU_ARGS_APPLY_EXPAND_5(_X, _a1, _a2, _a3, _a4, _a5) _X(_a1), _TU_ARGS_APPLY_EXPAND_4(_X, _a2, _a3, _a4, _a5) +#define _TU_ARGS_APPLY_EXPAND_6(_X, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1), _TU_ARGS_APPLY_EXPAND_5(_X, _a2, _a3, _a4, _a5, _a6) +#define _TU_ARGS_APPLY_EXPAND_7(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1), _TU_ARGS_APPLY_EXPAND_6(_X, _a2, _a3, _a4, _a5, _a6, _a7) +#define _TU_ARGS_APPLY_EXPAND_8(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1), _TU_ARGS_APPLY_EXPAND_7(_X, _a2, _a3, _a4, _a5, _a6, _a7, _a8) + //--------------------------------------------------------------------+ // Macro for function default arguments //--------------------------------------------------------------------+ diff --git a/src/device/usbd.h b/src/device/usbd.h index 3e97a3482..3ed1015b6 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -364,238 +364,343 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_MIDI_JACKID_OUT_EMB(1) //--------------------------------------------------------------------+ -// Audio v2.0 Descriptor Templates -//--------------------------------------------------------------------+ +// Audio Descriptor Templates +//--------------------------------------------------------------------+ + + +/* Audio v1.0 Descriptor Templates */ + +/* Standard AC Interface Descriptor UAC1 (4.3.1) */ +#define TUD_AUDIO10_DESC_STD_AC_LEN 9 +#define TUD_AUDIO10_DESC_STD_AC(_itfnum, _nEPs, _stridx) \ + TUD_AUDIO10_DESC_STD_AC_LEN, TUSB_DESC_INTERFACE, _itfnum, 0x00, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_CONTROL, AUDIO_INT_PROTOCOL_CODE_V1, _stridx + +/* Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) */ +#define TUD_AUDIO10_DESC_CS_AC_LEN(_nintfs) (8 + (_nintfs)) +// Class-Specific AC Interface Header descriptor, take list of streaming interface numbers as variable arguments +#define TUD_AUDIO10_DESC_CS_AC(_bcdADC, _totallen, ...) \ + TUD_AUDIO10_DESC_CS_AC_LEN(TU_ARGS_NUM(__VA_ARGS__)), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), U16_TO_U8S_LE(_totallen + TUD_AUDIO10_DESC_CS_AC_LEN(TU_ARGS_NUM(__VA_ARGS__))), TU_ARGS_NUM(__VA_ARGS__), __VA_ARGS__ + +/* Input Terminal Descriptor UAC1 (4.3.2.1) */ +#define TUD_AUDIO10_DESC_INPUT_TERM_LEN 12 +#define TUD_AUDIO10_DESC_INPUT_TERM(_termid, _termtype, _assocTerm, _nchannels, _channelcfg, _idxchannelnames, _stridx) \ + TUD_AUDIO10_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _nchannels, U16_TO_U8S_LE(_channelcfg), _idxchannelnames, _stridx + +/* Output Terminal Descriptor UAC1 (4.3.2.2) */ +#define TUD_AUDIO10_DESC_OUTPUT_TERM_LEN 9 +#define TUD_AUDIO10_DESC_OUTPUT_TERM(_termid, _termtype, _assocTerm, _srcid, _stridx) \ + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _stridx + +/* Mixer Unit Descriptor UAC1 (4.3.2.3) - One Input Pin */ +#define TUD_AUDIO10_DESC_MIXER_UNIT_ONE_PIN_LEN(_ctrlsize) (11 + (_ctrlsize)) +#define TUD_AUDIO10_DESC_MIXER_UNIT_ONE_PIN(_unitid, _srcid, _nrchannels, _channelcfg, _idxchannelnames, _ctrlsize, _stridx, ...) \ + TUD_AUDIO10_DESC_MIXER_UNIT_ONE_PIN_LEN(_ctrlsize), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_MIXER_UNIT, _unitid, 1, _srcid, _nrchannels, U16_TO_U8S_LE(_channelcfg), _idxchannelnames, __VA_ARGS__, _stridx + +/* Selector Unit Descriptor UAC1 (4.3.2.4) - One Input Pin */ +#define TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN_LEN 7 +#define TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN(_unitid, _srcid, _stridx) \ + TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT, _unitid, 1, _srcid, _stridx + +/* Feature Unit Descriptor UAC1 (4.3.2.5) - Variable Channels */ +#define TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(_nchannels) (7 + (_nchannels + 1) * 2) +// Feature Unit descriptor, take list of control bitmaps for master channel + each channel as variable arguments +#define TUD_AUDIO10_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, 2, TU_ARGS_APPLY_EXPAND(U16_TO_U8S_LE, __VA_ARGS__), _stridx + +/* Standard AS Interface Descriptor UAC1 (4.5.1) */ +#define TUD_AUDIO10_DESC_STD_AS_LEN 9 +#define TUD_AUDIO10_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \ + TUD_AUDIO10_DESC_STD_AS_LEN, TUSB_DESC_INTERFACE, _itfnum, _altset, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_STREAMING, AUDIO_INT_PROTOCOL_CODE_V1, _stridx + +/* Class-Specific AS Interface Descriptor UAC1 (4.5.2) */ +#define TUD_AUDIO10_DESC_CS_AS_INT_LEN 7 +#define TUD_AUDIO10_DESC_CS_AS_INT(_termid, _delay, _formattype) \ + TUD_AUDIO10_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AS_INTERFACE_AS_GENERAL, _termid, _delay, U16_TO_U8S_LE(_formattype) + +/* Type I Format Type Descriptor UAC1 (2.2.5) */ +#define TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs) (8 + (_nfreqs)*3) +// Type I Format descriptor, take list of sample rates in Hz as variable arguments +#define TUD_AUDIO10_DESC_TYPE_I_FORMAT(_nrchannels, _subframesize, _bitresolution, ...) \ + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(TU_ARGS_NUM(__VA_ARGS__)), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO10_FORMAT_TYPE_I, _nrchannels, _subframesize, _bitresolution, TU_ARGS_NUM(__VA_ARGS__), TU_ARGS_APPLY_EXPAND(U24_TO_U8S_LE, __VA_ARGS__) + +/* Standard AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.1) */ +#define TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN 9 +#define TUD_AUDIO10_DESC_STD_AS_ISO_EP(_ep, _attr, _maxEPsize, _interval, _sync_ep) \ + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN, TUSB_DESC_ENDPOINT, _ep, _attr, U16_TO_U8S_LE(_maxEPsize), _interval, 0x00, _sync_ep + +/* Class-Specific AS Isochronous Audio Data Endpoint Descriptor UAC1 (4.6.1.2) */ +#define TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN 7 +#define TUD_AUDIO10_DESC_CS_AS_ISO_EP(_attr, _lockdelayunits, _lockdelay) \ + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO10_CS_EP_SUBTYPE_GENERAL, _attr, _lockdelayunits, U16_TO_U8S_LE(_lockdelay) + +/* Standard AC Interrupt Endpoint Descriptor UAC1 (4.4.2) */ +#define TUD_AUDIO10_DESC_STD_AC_INT_EP_LEN 9 +#define TUD_AUDIO10_DESC_STD_AC_INT_EP(_ep, _interval) \ + TUD_AUDIO10_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(2), _interval, 0x00, 0x00 + +// AUDIO simple descriptor templates for UAC1 + +// AUDIO simple descriptor (UAC1) for 1 microphone input +// - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal + +#define TUD_AUDIO10_MIC_ONE_CH_DESC_LEN (\ + + TUD_AUDIO10_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1)\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN) + +#define TUD_AUDIO10_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize, ...) \ + /* Standard AC Interface Descriptor(4.3.1) */\ + TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1), /*_itf*/ ((_itfnum)+1)),\ + /* Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_nchannels*/ 0x01, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_stridx*/ 0x00),\ + /* Feature Unit Descriptor(4.3.2.5) */\ + TUD_AUDIO10_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlmaster*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch1*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME)),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.5.1) */\ + /* Interface 1, Alternate 1 - alternate interface for data streaming */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqtype*/ 0x01, /*_freq*/ _freq),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01, /* _sync_ep */ 0x00),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) + +/* Audio v2.0 Descriptor Templates */ /* Standard Interface Association Descriptor (IAD) */ -#define TUD_AUDIO_DESC_IAD_LEN 8 -#define TUD_AUDIO_DESC_IAD(_firstitf, _nitfs, _stridx) \ - TUD_AUDIO_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitf, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx +#define TUD_AUDIO20_DESC_IAD_LEN 8 +#define TUD_AUDIO20_DESC_IAD(_firstitf, _nitfs, _stridx) \ + TUD_AUDIO20_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitf, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx /* Standard AC Interface Descriptor(4.7.1) */ -#define TUD_AUDIO_DESC_STD_AC_LEN 9 -#define TUD_AUDIO_DESC_STD_AC(_itfnum, _nEPs, _stridx) /* _nEPs is 0 or 1 */\ - TUD_AUDIO_DESC_STD_AC_LEN, TUSB_DESC_INTERFACE, _itfnum, /* fixed to zero */ 0x00, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_CONTROL, AUDIO_INT_PROTOCOL_CODE_V2, _stridx +#define TUD_AUDIO20_DESC_STD_AC_LEN 9 +#define TUD_AUDIO20_DESC_STD_AC(_itfnum, _nEPs, _stridx) /* _nEPs is 0 or 1 */\ + TUD_AUDIO20_DESC_STD_AC_LEN, TUSB_DESC_INTERFACE, _itfnum, /* fixed to zero */ 0x00, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_CONTROL, AUDIO_INT_PROTOCOL_CODE_V2, _stridx /* Class-Specific AC Interface Header Descriptor(4.7.2) */ -#define TUD_AUDIO_DESC_CS_AC_LEN 9 -#define TUD_AUDIO_DESC_CS_AC(_bcdADC, _category, _totallen, _ctrl) /* _bcdADC : Audio Device Class Specification Release Number in Binary-Coded Decimal, _category : see audio20_function_t, _totallen : Total number of bytes returned for the class-specific AudioControl interface i.e. Clock Source, Unit and Terminal descriptors - Do not include TUD_AUDIO_DESC_CS_AC_LEN, we already do this here*/ \ - TUD_AUDIO_DESC_CS_AC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), _category, U16_TO_U8S_LE(_totallen + TUD_AUDIO_DESC_CS_AC_LEN), _ctrl +#define TUD_AUDIO20_DESC_CS_AC_LEN 9 +#define TUD_AUDIO20_DESC_CS_AC(_bcdADC, _category, _totallen, _ctrl) /* _bcdADC : Audio Device Class Specification Release Number in Binary-Coded Decimal, _category : see audio20_function_t, _totallen : Total number of bytes returned for the class-specific AudioControl interface i.e. Clock Source, Unit and Terminal descriptors - Do not include TUD_AUDIO20_DESC_CS_AC_LEN, we already do this here*/ \ + TUD_AUDIO20_DESC_CS_AC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_HEADER, U16_TO_U8S_LE(_bcdADC), _category, U16_TO_U8S_LE(_totallen + TUD_AUDIO20_DESC_CS_AC_LEN), _ctrl /* Clock Source Descriptor(4.7.2.1) */ -#define TUD_AUDIO_DESC_CLK_SRC_LEN 8 -#define TUD_AUDIO_DESC_CLK_SRC(_clkid, _attr, _ctrl, _assocTerm, _stridx) \ - TUD_AUDIO_DESC_CLK_SRC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE, _clkid, _attr, _ctrl, _assocTerm, _stridx +#define TUD_AUDIO20_DESC_CLK_SRC_LEN 8 +#define TUD_AUDIO20_DESC_CLK_SRC(_clkid, _attr, _ctrl, _assocTerm, _stridx) \ + TUD_AUDIO20_DESC_CLK_SRC_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_CLOCK_SOURCE, _clkid, _attr, _ctrl, _assocTerm, _stridx /* Input Terminal Descriptor(4.7.2.4) */ -#define TUD_AUDIO_DESC_INPUT_TERM_LEN 17 -#define TUD_AUDIO_DESC_INPUT_TERM(_termid, _termtype, _assocTerm, _clkid, _nchannelslogical, _channelcfg, _idxchannelnames, _ctrl, _stridx) \ - TUD_AUDIO_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _clkid, _nchannelslogical, U32_TO_U8S_LE(_channelcfg), _idxchannelnames, U16_TO_U8S_LE(_ctrl), _stridx +#define TUD_AUDIO20_DESC_INPUT_TERM_LEN 17 +#define TUD_AUDIO20_DESC_INPUT_TERM(_termid, _termtype, _assocTerm, _clkid, _nchannelslogical, _channelcfg, _idxchannelnames, _ctrl, _stridx) \ + TUD_AUDIO20_DESC_INPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_INPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _clkid, _nchannelslogical, U32_TO_U8S_LE(_channelcfg), _idxchannelnames, U16_TO_U8S_LE(_ctrl), _stridx /* Output Terminal Descriptor(4.7.2.5) */ -#define TUD_AUDIO_DESC_OUTPUT_TERM_LEN 12 -#define TUD_AUDIO_DESC_OUTPUT_TERM(_termid, _termtype, _assocTerm, _srcid, _clkid, _ctrl, _stridx) \ - TUD_AUDIO_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx +#define TUD_AUDIO20_DESC_OUTPUT_TERM_LEN 12 +#define TUD_AUDIO20_DESC_OUTPUT_TERM(_termid, _termtype, _assocTerm, _srcid, _clkid, _ctrl, _stridx) \ + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx /* Feature Unit Descriptor(4.7.2.8) */ -// 1 - Channel -#define TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN 6+(1+1)*4 -#define TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), _stridx - -// 2 - Channels -#define TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN (6+(2+1)*4) -#define TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _ctrlch2, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_TWO_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), _stridx -// 4 - Channels -#define TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN (6+(4+1)*4) -#define TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL(_unitid, _srcid, _ctrlch0master, _ctrlch1, _ctrlch2, _ctrlch3, _ctrlch4, _stridx) \ - TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, U32_TO_U8S_LE(_ctrlch0master), U32_TO_U8S_LE(_ctrlch1), U32_TO_U8S_LE(_ctrlch2), U32_TO_U8S_LE(_ctrlch3), U32_TO_U8S_LE(_ctrlch4), _stridx - -// For more channels, add definitions here +#define TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(_nchannels) (6 + (_nchannels + 1) * 4) +#define TUD_AUDIO20_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, TU_ARGS_APPLY_EXPAND(U32_TO_U8S_LE, __VA_ARGS__), _stridx /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */ -#define TUD_AUDIO_DESC_STD_AC_INT_EP_LEN 7 -#define TUD_AUDIO_DESC_STD_AC_INT_EP(_ep, _interval) \ - TUD_AUDIO_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(6), _interval +#define TUD_AUDIO20_DESC_STD_AC_INT_EP_LEN 7 +#define TUD_AUDIO20_DESC_STD_AC_INT_EP(_ep, _interval) \ + TUD_AUDIO20_DESC_STD_AC_INT_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(6), _interval /* Standard AS Interface Descriptor(4.9.1) */ -#define TUD_AUDIO_DESC_STD_AS_INT_LEN 9 -#define TUD_AUDIO_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \ - TUD_AUDIO_DESC_STD_AS_INT_LEN, TUSB_DESC_INTERFACE, _itfnum, _altset, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_STREAMING, AUDIO_INT_PROTOCOL_CODE_V2, _stridx +#define TUD_AUDIO20_DESC_STD_AS_LEN 9 +#define TUD_AUDIO20_DESC_STD_AS_INT(_itfnum, _altset, _nEPs, _stridx) \ + TUD_AUDIO20_DESC_STD_AS_LEN, TUSB_DESC_INTERFACE, _itfnum, _altset, _nEPs, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_STREAMING, AUDIO_INT_PROTOCOL_CODE_V2, _stridx /* Class-Specific AS Interface Descriptor(4.9.2) */ -#define TUD_AUDIO_DESC_CS_AS_INT_LEN 16 -#define TUD_AUDIO_DESC_CS_AS_INT(_termid, _ctrl, _formattype, _formats, _nchannelsphysical, _channelcfg, _stridx) \ - TUD_AUDIO_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_AS_GENERAL, _termid, _ctrl, _formattype, U32_TO_U8S_LE(_formats), _nchannelsphysical, U32_TO_U8S_LE(_channelcfg), _stridx +#define TUD_AUDIO20_DESC_CS_AS_INT_LEN 16 +#define TUD_AUDIO20_DESC_CS_AS_INT(_termid, _ctrl, _formattype, _formats, _nchannelsphysical, _channelcfg, _stridx) \ + TUD_AUDIO20_DESC_CS_AS_INT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_AS_GENERAL, _termid, _ctrl, _formattype, U32_TO_U8S_LE(_formats), _nchannelsphysical, U32_TO_U8S_LE(_channelcfg), _stridx /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */ -#define TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN 6 -#define TUD_AUDIO_DESC_TYPE_I_FORMAT(_subslotsize, _bitresolution) /* _subslotsize is number of bytes per sample (i.e. subslot) and can be 1,2,3, or 4 */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO20_FORMAT_TYPE_I, _subslotsize, _bitresolution +#define TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN 6 +#define TUD_AUDIO20_DESC_TYPE_I_FORMAT(_subslotsize, _bitresolution) /* _subslotsize is number of bytes per sample (i.e. subslot) and can be 1,2,3, or 4 */\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE, AUDIO20_FORMAT_TYPE_I, _subslotsize, _bitresolution /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */ -#define TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN 7 -#define TUD_AUDIO_DESC_STD_AS_ISO_EP(_ep, _attr, _maxEPsize, _interval) \ - TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN, TUSB_DESC_ENDPOINT, _ep, _attr, U16_TO_U8S_LE(_maxEPsize), _interval +#define TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN 7 +#define TUD_AUDIO20_DESC_STD_AS_ISO_EP(_ep, _attr, _maxEPsize, _interval) \ + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN, TUSB_DESC_ENDPOINT, _ep, _attr, U16_TO_U8S_LE(_maxEPsize), _interval /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */ -#define TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN 8 -#define TUD_AUDIO_DESC_CS_AS_ISO_EP(_attr, _ctrl, _lockdelayunit, _lockdelay) \ - TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO20_CS_EP_SUBTYPE_GENERAL, _attr, _ctrl, _lockdelayunit, U16_TO_U8S_LE(_lockdelay) +#define TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN 8 +#define TUD_AUDIO20_DESC_CS_AS_ISO_EP(_attr, _ctrl, _lockdelayunit, _lockdelay) \ + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO20_CS_EP_SUBTYPE_GENERAL, _attr, _ctrl, _lockdelayunit, U16_TO_U8S_LE(_lockdelay) /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */ -#define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN 7 -#define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(_ep, _epsize, _interval) \ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_NO_SYNC | (uint8_t)TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(_epsize), _interval +#define TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN 7 +#define TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(_ep, _epsize, _interval) \ + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_NO_SYNC | (uint8_t)TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(_epsize), _interval // AUDIO simple descriptor (UAC2) for 1 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source -#define TUD_AUDIO_MIC_ONE_CH_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) - -#define TUD_AUDIO_MIC_ONE_CH_DESC_N_AS_INT 1 // Number of AS interfaces - -#define TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ +#define TUD_AUDIO20_MIC_ONE_CH_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) + +#define TUD_AUDIO20_MIC_ONE_CH_DESC_N_AS_INT 1 // Number of AS interfaces + +#define TUD_AUDIO20_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) // AUDIO simple descriptor (UAC2) for 4 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source -#define TUD_AUDIO_MIC_FOUR_CH_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN) - -#define TUD_AUDIO_MIC_FOUR_CH_DESC_N_AS_INT 1 // Number of AS interfaces - -#define TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ +#define TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(4)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) + +#define TUD_AUDIO20_MIC_FOUR_CH_DESC_N_AS_INT 1 // Number of AS interfaces + +#define TUD_AUDIO20_MIC_FOUR_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_MICROPHONE, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(4), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_FOUR_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch3*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch4*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch2*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch3*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch4*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x04, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) // AUDIO simple descriptor (UAC2) for mono speaker // - 1 Input Terminal, 2 Feature Unit (Mute and Volume Control), 3 Output Terminal, 4 Clock Source -#define TUD_AUDIO_SPEAKER_MONO_FB_DESC_LEN (TUD_AUDIO_DESC_IAD_LEN\ - + TUD_AUDIO_DESC_STD_AC_LEN\ - + TUD_AUDIO_DESC_CS_AC_LEN\ - + TUD_AUDIO_DESC_CLK_SRC_LEN\ - + TUD_AUDIO_DESC_INPUT_TERM_LEN\ - + TUD_AUDIO_DESC_OUTPUT_TERM_LEN\ - + TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_STD_AS_INT_LEN\ - + TUD_AUDIO_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO_DESC_TYPE_I_FORMAT_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_CS_AS_ISO_EP_LEN\ - + TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN) - -#define TUD_AUDIO_SPEAKER_MONO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ +#define TUD_AUDIO20_SPEAKER_MONO_FB_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + + TUD_AUDIO20_DESC_STD_AC_LEN\ + + TUD_AUDIO20_DESC_CS_AC_LEN\ + + TUD_AUDIO20_DESC_CLK_SRC_LEN\ + + TUD_AUDIO20_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1)\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO20_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO20_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN\ + + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP_LEN) + +#define TUD_AUDIO20_SPEAKER_MONO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epoutsize, _epfb, _epfbsize) \ /* Standard Interface Association Descriptor (IAD) */\ - TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ - TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + TUD_AUDIO20_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.7.2) */\ - TUD_AUDIO_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO_DESC_CLK_SRC_LEN+TUD_AUDIO_DESC_INPUT_TERM_LEN+TUD_AUDIO_DESC_OUTPUT_TERM_LEN+TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL_LEN, /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ + TUD_AUDIO20_DESC_CS_AC(/*_bcdADC*/ 0x0200, /*_category*/ AUDIO20_FUNC_DESKTOP_SPEAKER, /*_totallen*/ TUD_AUDIO20_DESC_CLK_SRC_LEN+TUD_AUDIO20_DESC_INPUT_TERM_LEN+TUD_AUDIO20_DESC_OUTPUT_TERM_LEN+TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(1), /*_ctrl*/ AUDIO20_CS_AS_INTERFACE_CTRL_LATENCY_POS),\ /* Clock Source Descriptor(4.7.2.1) */\ - TUD_AUDIO_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ 0x04, /*_attr*/ AUDIO20_CLOCK_SOURCE_ATT_INT_FIX_CLK, /*_ctrl*/ (AUDIO20_CTRL_R << AUDIO20_CLOCK_SOURCE_CTRL_CLK_FRQ_POS), /*_assocTerm*/ 0x01, /*_stridx*/ 0x00),\ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO20_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ 0x04, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO20_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ 0x03, /*_termtype*/ AUDIO_TERM_TYPE_OUT_DESKTOP_SPEAKER, /*_assocTerm*/ 0x01, /*_srcid*/ 0x02, /*_clkid*/ 0x04, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ - TUD_AUDIO_DESC_FEATURE_UNIT_ONE_CHANNEL(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ 0x02, /*_srcid*/ 0x01, /*_stridx*/ 0x00, /*_ctrlch0master*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS, /*_ctrlch1*/ AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum) + 1), /*_altset*/ 0x01, /*_nEPs*/ 0x02, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ - TUD_AUDIO_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ 0x01, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ - TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ + TUD_AUDIO20_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ - TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\ - TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) + TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) // Calculate wMaxPacketSize of Endpoints #define TUD_AUDIO_EP_SIZE(_maxFrequency, _nBytesPerSample, _nChannels) \ -- cgit v1.3.1 From 289680a6b99e323b948187c62be3e942af2ebbdf Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 28 Sep 2025 23:20:32 +0200 Subject: Add basic UAC1 support Signed-off-by: HiFiPhile --- .../device/audio_4_channel_mic/src/tusb_config.h | 2 - .../audio_4_channel_mic_freertos/src/tusb_config.h | 2 - examples/device/audio_test/src/tusb_config.h | 1 - .../device/audio_test_freertos/src/tusb_config.h | 1 - .../device/audio_test_multi_rate/src/tusb_config.h | 1 - examples/device/cdc_uac2/src/tusb_config.h | 2 - examples/device/uac2_headset/src/tusb_config.h | 2 - examples/device/uac2_speaker_fb/src/tusb_config.h | 2 - src/class/audio/audio.h | 32 +-- src/class/audio/audio_device.c | 309 +++++++++++++-------- src/class/audio/audio_device.h | 26 +- src/device/usbd.h | 8 +- 12 files changed, 226 insertions(+), 162 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 718486941..a1b3a1050 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -105,8 +105,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN - #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 7a9a40c49..7aaf7ffa0 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -111,8 +111,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_FOUR_CH_DESC_LEN - #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 8a63cc521..9ef53e39d 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -108,7 +108,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 21b6a6f76..343bebc96 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -114,7 +114,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index e92d20c49..e68005375 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -122,7 +122,6 @@ extern "C" { // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index 2e744f8d2..43949186f 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -105,8 +105,6 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_HEADSET_STEREO_DESC_LEN - // How many formats are used, need to adjust USB descriptor if changed #define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index e9165163b..c6d00d4fb 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -108,8 +108,6 @@ extern "C" { // Allow volume controlled by on-baord button #define CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP 1 -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO_HEADSET_STEREO_DESC_LEN - // How many formats are used, need to adjust USB descriptor if changed #define CFG_TUD_AUDIO_FUNC_1_N_FORMATS 2 diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index 284feff55..3bf082096 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -128,8 +128,6 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -#define CFG_TUD_AUDIO_FUNC_1_DESC_LEN TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN - // Can be enabled with Full-Speed device on OSX, which forces feedback EP size to 3, in this case CFG_QUIRK_OS_GUESSING can be disabled #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index ecc7b9427..1ab0739b5 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -314,21 +314,21 @@ typedef enum { } audio10_channel_config_t; - //--------------------------------------------------------------------+ - // USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS - //--------------------------------------------------------------------+ - - /// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) - #define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ - struct TU_ATTR_PACKED { \ - uint8_t bLength; /* Size of this descriptor in bytes: 8+n. */ \ - uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ - uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */ \ - uint16_t bcdADC; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */ \ - uint16_t wTotalLength; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */ \ - uint8_t bInCollection; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */ \ - uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */ \ - } +//--------------------------------------------------------------------+ +// USB AUDIO CLASS 1.0 (UAC1) DESCRIPTORS +//--------------------------------------------------------------------+ + +/// AUDIO Class-Specific AC Interface Header Descriptor UAC1 (4.3.2) +#define audio10_desc_cs_ac_interface_n_t(numInterfaces) \ + struct TU_ATTR_PACKED { \ + uint8_t bLength; /* Size of this descriptor in bytes: 8+n. */ \ + uint8_t bDescriptorType; /* Descriptor Type. Value: TUSB_DESC_CS_INTERFACE. */ \ + uint8_t bDescriptorSubType; /* Descriptor SubType. Value: AUDIO10_CS_AC_INTERFACE_HEADER. */ \ + uint16_t bcdADC; /* Audio Device Class Specification Release Number in Binary-Coded Decimal. Value: 0x0100 for UAC1. */ \ + uint16_t wTotalLength; /* Total number of bytes returned for the class-specific AudioControl interface descriptor. */ \ + uint8_t bInCollection; /* The number of AudioStreaming and MIDIStreaming interfaces in the Audio Interface Collection. */ \ + uint8_t baInterfaceNr[numInterfaces]; /* Interface number of the AudioStreaming or MIDIStreaming interface in the Collection. */ \ + } /// AUDIO Input Terminal Descriptor UAC1 (4.3.2.1) typedef struct TU_ATTR_PACKED { @@ -1014,7 +1014,7 @@ typedef enum { /// AUDIO Channel Cluster Descriptor UAC2 (4.1) typedef struct TU_ATTR_PACKED { uint8_t bNrChannels; ///< Number of channels currently connected. - audio20_channel_config_t bmChannelConfig;///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. + uint32_t bmChannelConfig;///< Bitmap according to 'audio20_channel_config_t' with a 1 set if channel is connected and 0 else. In case channels are non-predefined ignore them here (see UAC2 specification 4.1 Audio Channel Cluster Descriptor. uint8_t iChannelNames; ///< Index of a string descriptor, describing the name of the first inserted channel with a non-predefined spatial location. } audio20_desc_channel_cluster_t; diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index f56a27fd3..c56752536 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -283,7 +283,7 @@ typedef struct // Encoding parameters - parameters are set when alternate AS interface is set by host #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - audio20_format_type_t format_type_tx; + uint8_t format_type_tx; uint8_t n_channels_tx; uint8_t n_bytes_per_sample_tx; #endif @@ -595,9 +595,13 @@ static bool audiod_tx_xfer_isr(uint8_t rhport, audiod_function_t * audio, uint16 #endif +//--------------------------------------------------------------------+ +// OTHER API +//--------------------------------------------------------------------+ + #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP // If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_done_cb() is called in inform user -bool tud_audio_int_n_write(uint8_t func_id, const audio20_interrupt_data_t *data) { +bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); TU_VERIFY(_audiod_fct[func_id].ep_int != 0); @@ -605,10 +609,15 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio20_interrupt_data_t *data // We write directly into the EP's buffer - abort if previous transfer not complete TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int)); + uint8_t size = tud_audio_n_version(func_id) == 2 ? sizeof(audio20_interrupt_data_t) : sizeof(audio10_interrupt_data_t); + + // INT EP buffer must be large enough + TU_ASSERT(size <= sizeof(int_ep_buf[func_id].buf)); + // Check length - if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio20_interrupt_data_t)) == 0) { + if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, size) == 0) { // Schedule transmit - TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf)), 0); + TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, size), 0); } else { // Release endpoint since we don't make any transfer usbd_edpt_release(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int); @@ -650,8 +659,64 @@ static inline bool audiod_fb_send(audiod_function_t *audio) { // We send 3 bytes since sending packet larger than wMaxPacketSize is pretty ugly return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, apply_correction ? 3 : 4); } + +uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { + audiod_function_t *audio = &_audiod_fct[func_id]; + uint32_t feedback; + + switch (audio->feedback.compute_method) { + case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: + feedback = (cycles << audio->feedback.compute.power_of_2); + break; + + case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: + feedback = (uint32_t) ((float) cycles * audio->feedback.compute.float_const); + break; + + case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: { + uint64_t fb64 = (((uint64_t) cycles) * audio->feedback.compute.fixed.sample_freq) << (16 - (audio->feedback.frame_shift - 1)); + feedback = (uint32_t) (fb64 / audio->feedback.compute.fixed.mclk_freq); + } break; + + default: + return 0; + } + + // For Windows: https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers + // The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. + // This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot + // (audio slot = channel count samples). + if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; + if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; + + tud_audio_n_fb_set(func_id, feedback); + + return feedback; +} + +bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) { + TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); + + _audiod_fct[func_id].feedback.value = feedback; + + return true; +} #endif +uint8_t tud_audio_n_version(uint8_t func_id) { + TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); + + uint8_t bIntfProtocol = ((tusb_desc_interface_t const *)_audiod_fct[func_id].p_desc)->bInterfaceProtocol; + + if (bIntfProtocol == AUDIO_INT_PROTOCOL_CODE_V1) { + return 1; + } else if (bIntfProtocol == AUDIO_INT_PROTOCOL_CODE_V2) { + return 2; + } else { + return 0; // Unknown version + } +} + //--------------------------------------------------------------------+ // USBD Driver API //--------------------------------------------------------------------+ @@ -817,7 +882,8 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint AUDIO_SUBCLASS_CONTROL == itf_desc->bInterfaceSubClass); // Verify version is correct - this check can be omitted - TU_VERIFY(itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V2); + TU_VERIFY(itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V1 || + itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V2); // Verify interrupt control EP is enabled if demanded by descriptor TU_ASSERT(itf_desc->bNumEndpoints <= 1);// 0 or 1 EPs are allowed @@ -835,21 +901,25 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint _audiod_fct[i].p_desc = (uint8_t const *) itf_desc;// Save pointer to AC descriptor which is by specification always the first one _audiod_fct[i].rhport = rhport; - // Setup descriptor lengths - switch (i) { - case 0: - _audiod_fct[i].desc_length = CFG_TUD_AUDIO_FUNC_1_DESC_LEN; - break; -#if CFG_TUD_AUDIO > 1 - case 1: - _audiod_fct[i].desc_length = CFG_TUD_AUDIO_FUNC_2_DESC_LEN; - break; -#endif -#if CFG_TUD_AUDIO > 2 - case 2: - _audiod_fct[i].desc_length = CFG_TUD_AUDIO_FUNC_3_DESC_LEN; - break; -#endif + // Calculate descriptor length + { + uint8_t const *p_desc = (uint8_t const *) itf_desc; + uint8_t const *p_desc_end = p_desc + max_len; + uint16_t total_len = sizeof(tusb_desc_interface_t); + // Skip Standard AC interface descriptor + p_desc = tu_desc_next(p_desc); + while (p_desc_end - p_desc > 0) { + // Stop if: + // - Non audio streaming interface descriptor found + // - IAD found + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass != AUDIO_SUBCLASS_STREAMING) + || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { + break; + } + total_len += p_desc[0]; + p_desc = tu_desc_next(p_desc); + } + _audiod_fct[i].desc_length = total_len; } #ifdef TUP_DCD_EDPT_ISO_ALLOC @@ -868,34 +938,58 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint uint8_t ep_fb = 0; #endif uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { - tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; - if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Explicit feedback EP - if (desc_ep->bmAttributes.usage == 1) { - ep_fb = desc_ep->bEndpointAddress; - } - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN - // Data or data with implicit feedback IN EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN - && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { - ep_in = desc_ep->bEndpointAddress; - ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); - } - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_OUT - // Data OUT EP - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT - && desc_ep->bmAttributes.usage == 0) { - ep_out = desc_ep->bEndpointAddress; - ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); - } - #endif + // UAC1 + if (tud_audio_n_version(i) == 1) { + audio10_desc_as_iso_data_ep_t const *desc_ep = (audio10_desc_as_iso_data_ep_t const *) p_desc; + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + // Explicit feedback EP + if (desc_ep->bRefresh > 0) { + ep_fb = desc_ep->bEndpointAddress; + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_IN + // Data or data with implicit feedback IN EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN && desc_ep->bRefresh == 0) { + ep_in = desc_ep->bEndpointAddress; + ep_in_size = TU_MAX(tu_edpt_packet_size((tusb_desc_endpoint_t*)desc_ep), ep_in_size); + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_OUT + // Data OUT EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT && desc_ep->bRefresh == 0) { + ep_out = desc_ep->bEndpointAddress; + ep_out_size = TU_MAX(tu_edpt_packet_size((tusb_desc_endpoint_t*)desc_ep), ep_out_size); + } + #endif + } else { + // UAC2 + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + // Explicit feedback EP + if (desc_ep->bmAttributes.usage == 1) { + ep_fb = desc_ep->bEndpointAddress; + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_IN + // Data or data with implicit feedback IN EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN + && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { + ep_in = desc_ep->bEndpointAddress; + ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); + } + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_OUT + // Data OUT EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT + && desc_ep->bmAttributes.usage == 0) { + ep_out = desc_ep->bEndpointAddress; + ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); + } + #endif } } @@ -925,19 +1019,22 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL { uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { // For data or data with implicit feedback IN EP + // For UAC1 this is always the case since there is no usage field if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { _audiod_fct[i].interval_tx = desc_ep->bInterval; } } - } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL) { + } else if (tud_audio_n_version(i) == 2 && + tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL) { + // For UAC2 only, UAC1 doesn't have a clock source if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { _audiod_fct[i].bclock_id_tx = p_desc[8]; } @@ -950,7 +1047,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP { uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { // For each endpoint @@ -978,7 +1075,7 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint TU_ASSERT(i < CFG_TUD_AUDIO); // This is all we need so far - the EPs are setup by a later set_interface request (as per UAC2 specification) - uint16_t drv_len = _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN;// - TUD_AUDIO_DESC_IAD_LEN since tinyUSB already handles the IAD descriptor + uint16_t drv_len = _audiod_fct[i].desc_length; return drv_len; } @@ -1090,9 +1187,13 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p // Open new EP if necessary - EPs are only to be closed or opened for AS interfaces - Look for AS interface with correct alternate interface uint8_t const *p_desc = tu_desc_next(audio->p_desc); // Skip entire AC descriptor block - p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + if (tud_audio_n_version(func_id) == 1) { + p_desc += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; + } else { + p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + } // Get pointer at end - uint8_t const *p_desc_end = audio->p_desc + audio->desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = audio->p_desc + audio->desc_length; // p_desc starts at required interface with alternate setting zero // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning @@ -1276,9 +1377,11 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const TU_VERIFY(audiod_verify_entity_exists(itf, entityID, &func_id)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + if (tud_audio_n_version(func_id) == 2) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + } } #endif @@ -1537,47 +1640,6 @@ static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_n audio->feedback.value = feedback; } -uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { - audiod_function_t *audio = &_audiod_fct[func_id]; - uint32_t feedback; - - switch (audio->feedback.compute_method) { - case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: - feedback = (cycles << audio->feedback.compute.power_of_2); - break; - - case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: - feedback = (uint32_t) ((float) cycles * audio->feedback.compute.float_const); - break; - - case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: { - uint64_t fb64 = (((uint64_t) cycles) * audio->feedback.compute.fixed.sample_freq) << (16 - (audio->feedback.frame_shift - 1)); - feedback = (uint32_t) (fb64 / audio->feedback.compute.fixed.mclk_freq); - } break; - - default: - return 0; - } - - // For Windows: https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers - // The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. - // This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot - // (audio slot = channel count samples). - if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; - if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; - - tud_audio_n_fb_set(func_id, feedback); - - return feedback; -} - -bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); - - _audiod_fct[func_id].feedback.value = feedback; - - return true; -} #endif TU_ATTR_FAST_FUNC void audiod_sof_isr(uint8_t rhport, uint32_t frame_count) { @@ -1651,12 +1713,14 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req TU_VERIFY(0 == tu_memcpy_s(_audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz, data, (size_t) len)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - // Find data for sampling_frequency_control - if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) { - uint8_t entityID = TU_U16_HIGH(p_request->wIndex); - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + if (tud_audio_n_version(func_id) == 2) { + // Find data for sampling_frequency_control + if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) { + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + } } } #endif @@ -1673,7 +1737,12 @@ static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t * if (_audiod_fct[i].p_desc && ((tusb_desc_interface_t const *) _audiod_fct[i].p_desc)->bInterfaceNumber == itf) { // Get pointers after class specific AC descriptors and end of AC descriptors - entities are defined in between uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc);// Points to CS AC descriptor - uint8_t const *p_desc_end = ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength + p_desc; + uint8_t const *p_desc_end = p_desc; + if (tud_audio_n_version(i) == 1) { + p_desc_end += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; + } else { + p_desc_end += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + } p_desc = tu_desc_next(p_desc);// Get past CS AC descriptor // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning @@ -1696,7 +1765,7 @@ static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id) { if (_audiod_fct[i].p_desc) { // Get pointer at beginning and end uint8_t const *p_desc = _audiod_fct[i].p_desc; - uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; + uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *)p_desc)->bInterfaceNumber == itf) { @@ -1719,7 +1788,11 @@ static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) { // Advance past AC descriptors - EP we look for are streaming EPs uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc); - p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + if (tud_audio_n_version(i) == 1) { + p_desc += ((audio10_desc_cs_ac_interface_n_t(1) const *) p_desc)->wTotalLength; + } else { + p_desc += ((audio20_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; + } // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning while (p_desc_end - p_desc > 0) { @@ -1739,19 +1812,31 @@ static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t c p_desc = tu_desc_next(p_desc);// Exclude standard AS interface descriptor of current alternate interface descriptor - // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_AS_GENERAL) { - audio->n_channels_tx = ((audio20_desc_cs_as_interface_t const *) p_desc)->bNrChannels; - audio->format_type_tx = (audio20_format_type_t) (((audio20_desc_cs_as_interface_t const *) p_desc)->bFormatType); - // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) - p_desc = tu_desc_next(p_desc); - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE && ((audio20_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO20_FORMAT_TYPE_I) { - audio->n_bytes_per_sample_tx = ((audio20_desc_type_I_format_t const *) p_desc)->bSubslotSize; + if (tud_audio_n_version(audio - _audiod_fct) == 1) { + p_desc = tu_desc_next(p_desc);// Exclude Class-Specific AS Interface Descriptor(4.5.2) to get to format type descriptor + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE) { + audio->format_type_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bFormatType; + if (audio->format_type_tx == AUDIO10_FORMAT_TYPE_I) { + audio->n_channels_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bNrChannels; + audio->n_bytes_per_sample_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bSubFrameSize; + } + } + } else { + // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_AS_GENERAL) { + audio->n_channels_tx = ((audio20_desc_cs_as_interface_t const *) p_desc)->bNrChannels; + audio->format_type_tx = ((audio20_desc_cs_as_interface_t const *) p_desc)->bFormatType; + // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) + p_desc = tu_desc_next(p_desc); + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO20_CS_AS_INTERFACE_FORMAT_TYPE && ((audio20_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO20_FORMAT_TYPE_I) { + audio->n_bytes_per_sample_tx = ((audio20_desc_type_I_format_t const *) p_desc)->bSubslotSize; + } } } } static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { + // AUDIO20_FORMAT_TYPE_I = AUDIO10_FORMAT_TYPE_I TU_VERIFY(audio->format_type_tx == AUDIO20_FORMAT_TYPE_I); TU_VERIFY(audio->n_channels_tx); TU_VERIFY(audio->n_bytes_per_sample_tx); diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index ec710aed5..d2d794053 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -37,20 +37,6 @@ // All sizes are in bytes! -#ifndef CFG_TUD_AUDIO_FUNC_1_DESC_LEN -#error You must tell the driver the length of the audio function descriptor including IAD descriptor -#endif -#if CFG_TUD_AUDIO > 1 -#ifndef CFG_TUD_AUDIO_FUNC_2_DESC_LEN -#error You must tell the driver the length of the audio function descriptor including IAD descriptor -#endif -#endif -#if CFG_TUD_AUDIO > 2 -#ifndef CFG_TUD_AUDIO_FUNC_3_DESC_LEN -#error You must tell the driver the length of the audio function descriptor including IAD descriptor -#endif -#endif - // Size of control buffer used to receive and send control messages via EP0 - has to be big enough to hold your biggest request structure e.g. range requests with multiple intervals defined or cluster descriptors #ifndef CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ #error You must define an audio class control request buffer size! @@ -205,6 +191,7 @@ extern "C" { // CFG_TUD_AUDIO > 1 //--------------------------------------------------------------------+ bool tud_audio_n_mounted(uint8_t func_id); +uint8_t tud_audio_n_version(uint8_t func_id); #if CFG_TUD_AUDIO_ENABLE_EP_OUT uint16_t tud_audio_n_available (uint8_t func_id); @@ -220,13 +207,14 @@ tu_fifo_t* tud_audio_n_get_ep_in_ff (uint8_t func_id); #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -bool tud_audio_int_n_write (uint8_t func_id, const audio20_interrupt_data_t * data); +bool tud_audio_int_n_write (uint8_t func_id, const audio_interrupt_data_t * data); #endif //--------------------------------------------------------------------+ // Application API (Interface0) //--------------------------------------------------------------------+ static inline bool tud_audio_mounted (void); +static inline uint8_t tud_audio_version (void); #if CFG_TUD_AUDIO_ENABLE_EP_OUT static inline uint16_t tud_audio_available (void); @@ -244,7 +232,7 @@ static inline tu_fifo_t* tud_audio_get_ep_in_ff (void); // INT CTR API #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -static inline bool tud_audio_int_write (const audio20_interrupt_data_t * data); +static inline bool tud_audio_int_write (const audio_interrupt_data_t * data); #endif // Buffer control EP data and schedule a transmit @@ -397,6 +385,10 @@ TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_mounted(void) { return tud_audio_n_mounted(0); } +TU_ATTR_ALWAYS_INLINE static inline uint8_t tud_audio_version(void) { + return tud_audio_n_version(0); +} + #if CFG_TUD_AUDIO_ENABLE_EP_OUT TU_ATTR_ALWAYS_INLINE static inline uint16_t tud_audio_available(void) { @@ -434,7 +426,7 @@ TU_ATTR_ALWAYS_INLINE static inline tu_fifo_t* tud_audio_get_ep_in_ff(void) { #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_int_write(const audio20_interrupt_data_t * data) { +TU_ATTR_ALWAYS_INLINE static inline bool tud_audio_int_write(const audio_interrupt_data_t * data) { return tud_audio_int_n_write(0, data); } #endif diff --git a/src/device/usbd.h b/src/device/usbd.h index 3ed1015b6..79105e8ac 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -443,7 +443,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // AUDIO simple descriptor (UAC1) for 1 microphone input // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal -#define TUD_AUDIO10_MIC_ONE_CH_DESC_LEN (\ +#define TUD_AUDIO10_MIC_ONE_CH_DESC_LEN(_nfreqs) (\ + TUD_AUDIO10_DESC_STD_AC_LEN\ + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ @@ -452,7 +452,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ + TUD_AUDIO10_DESC_STD_AS_LEN\ + TUD_AUDIO10_DESC_STD_AS_LEN\ + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ - + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN) @@ -476,11 +476,11 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Class-Specific AS Interface Descriptor(4.5.2) */\ TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ - TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqtype*/ 0x01, /*_freq*/ _freq),\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freq*/ __VA_ARGS__),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01, /* _sync_ep */ 0x00),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ - TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ 0x00, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) /* Audio v2.0 Descriptor Templates */ -- cgit v1.3.1 From 5d179c255bdfa5d2639c68638d593446a46a1e30 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Mon, 29 Sep 2025 17:50:23 +0200 Subject: Update TUD_AUDIO_EP_SIZE macro Signed-off-by: Mengsk --- examples/device/audio_4_channel_mic/src/tusb_config.h | 2 +- examples/device/audio_4_channel_mic_freertos/src/tusb_config.h | 2 +- examples/device/audio_test/src/tusb_config.h | 2 +- examples/device/audio_test_freertos/src/tusb_config.h | 2 +- examples/device/audio_test_multi_rate/src/tusb_config.h | 4 ++-- examples/device/cdc_uac2/src/tusb_config.h | 8 ++++---- examples/device/cdc_uac2/src/usb_descriptors.h | 8 ++++---- examples/device/uac2_headset/src/tusb_config.h | 8 ++++---- examples/device/uac2_headset/src/usb_descriptors.h | 8 ++++---- src/device/usbd.h | 4 ++-- 10 files changed, 24 insertions(+), 24 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index a1b3a1050..6115f44bb 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -110,7 +110,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 7aaf7ffa0..7ce55aa77 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -116,7 +116,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 9ef53e39d..32859b610 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -113,7 +113,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 343bebc96..ceb496e8d 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -119,7 +119,7 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index e68005375..9a73a2cd9 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -127,8 +127,8 @@ extern "C" { #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example write FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index 43949186f..f1cff7e9a 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -140,8 +140,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device @@ -149,8 +149,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index afb74d5b5..95d8da5c3 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -117,7 +117,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ @@ -127,7 +127,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ADAPTIVE | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -141,7 +141,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ @@ -151,7 +151,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index c6d00d4fb..5e6211cc0 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -141,8 +141,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device @@ -150,8 +150,8 @@ extern "C" { // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 68d15a857..465fa6035 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -117,7 +117,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ @@ -127,7 +127,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -141,7 +141,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ @@ -151,7 +151,7 @@ enum /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX), /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) diff --git a/src/device/usbd.h b/src/device/usbd.h index 0487518cf..184cfea5e 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -703,8 +703,8 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_AUDIO20_DESC_STD_AS_ISO_FB_EP(/*_ep*/ _epfb, /*_epsize*/ _epfbsize, /*_interval*/ 1) // Calculate wMaxPacketSize of Endpoints -#define TUD_AUDIO_EP_SIZE(_maxFrequency, _nBytesPerSample, _nChannels) \ - ((((_maxFrequency + (TUD_OPT_HIGH_SPEED ? 7999 : 999)) / (TUD_OPT_HIGH_SPEED ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels) +#define TUD_AUDIO_EP_SIZE(_is_highspeed, _maxFrequency, _nBytesPerSample, _nChannels) \ + ((((_maxFrequency + (_is_highspeed ? 7999 : 999)) / (_is_highspeed ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels) //--------------------------------------------------------------------+ -- cgit v1.3.1 From 9afe71c77ef3ab05f87f7fd37e7c39cd3d09cdb7 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Mon, 29 Sep 2025 17:51:10 +0200 Subject: Add UAC1 support to speaker example Signed-off-by: Mengsk --- examples/device/uac2_headset/src/main.c | 35 ++- examples/device/uac2_speaker_fb/CMakeLists.txt | 1 - examples/device/uac2_speaker_fb/src/main.c | 309 +++++++++++++++++---- .../device/uac2_speaker_fb/src/quirk_os_guessing.c | 90 ------ .../device/uac2_speaker_fb/src/quirk_os_guessing.h | 75 ----- examples/device/uac2_speaker_fb/src/tusb_config.h | 44 ++- .../device/uac2_speaker_fb/src/usb_descriptors.c | 168 +++++------ .../device/uac2_speaker_fb/src/usb_descriptors.h | 14 +- src/device/usbd.h | 9 +- 9 files changed, 398 insertions(+), 347 deletions(-) delete mode 100644 examples/device/uac2_speaker_fb/src/quirk_os_guessing.c delete mode 100644 examples/device/uac2_speaker_fb/src/quirk_os_guessing.h (limited to 'examples') diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 6cfab946b..31b2f3ee3 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -142,7 +142,7 @@ void tud_resume_cb(void) { } // Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool tud_audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { @@ -177,7 +177,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_ } // Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio20_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); @@ -199,7 +199,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_ } // Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool tud_audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { @@ -227,7 +227,7 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_r } // Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool tud_audio20_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); @@ -262,16 +262,21 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_r // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; - - if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_get_request(rhport, request); - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio_feature_unit_get_request(rhport, request); - else { - TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", - request->bEntityID, request->bControlSelector, request->bRequest); + if (tud_audio_version() == 1) { + // No entity in UAC1 + } else { + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return tud_audio20_clock_get_request(rhport, request); + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return tud_audio20_feature_unit_get_request(rhport, request); + else { + TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + } } + return false; } @@ -280,9 +285,9 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio_feature_unit_set_request(rhport, request, buf); + return tud_audio20_feature_unit_set_request(rhport, request, buf); if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_set_request(rhport, request, buf); + return tud_audio20_clock_set_request(rhport, request, buf); TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); diff --git a/examples/device/uac2_speaker_fb/CMakeLists.txt b/examples/device/uac2_speaker_fb/CMakeLists.txt index 0ed3db646..ced98a909 100644 --- a/examples/device/uac2_speaker_fb/CMakeLists.txt +++ b/examples/device/uac2_speaker_fb/CMakeLists.txt @@ -21,7 +21,6 @@ add_executable(${PROJECT}) target_sources(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/quirk_os_guessing.c ) # Example include diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 2e525ef28..936da4c80 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -31,25 +31,17 @@ #include "tusb.h" #include "usb_descriptors.h" -#ifdef CFG_QUIRK_OS_GUESSING - #include "quirk_os_guessing.h" -#endif - //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ -// List of supported sample rates -#if defined(__RX__) -const uint32_t sample_rates[] = {44100, 48000}; -#else +// List of supported sample rates for UAC2 const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; -#endif - -uint32_t current_sample_rate = 44100; #define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) +uint32_t current_sample_rate = 44100; + /* Blink pattern * - 25 ms : streaming data * - 250 ms : device not mounted @@ -153,8 +145,179 @@ void tud_resume_cb(void) { // Application Callback API Implementations //--------------------------------------------------------------------+ -// Helper for clock get requests -static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { +//--------------------------------------------------------------------+ +// UAC1 Helper Functions +//--------------------------------------------------------------------+ + +static bool audio10_set_req_ep(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + // Request uses 3 bytes + TU_VERIFY(p_request->wLength == 3); + + current_sample_rate = tu_unaligned_read32(pBuff) & 0x00FFFFFF; + + TU_LOG2("EP set current freq: %" PRIu32 "\r\n", current_sample_rate); + + return true; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_get_req_ep(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_GET_CUR) { + TU_LOG2("EP get current freq\r\n"); + + uint8_t freq[3]; + freq[0] = (uint8_t) (current_sample_rate & 0xFF); + freq[1] = (uint8_t) ((current_sample_rate >> 8) & 0xFF); + freq[2] = (uint8_t) ((current_sample_rate >> 16) & 0xFF); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, freq, sizeof(freq)); + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our feature unit + if (entityID == UAC1_ENTITY_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength ==1); + + mute[channelNum] = pBuff[0]; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 2); + + volume[channelNum] = (int16_t)tu_unaligned_read16(pBuff) / 256; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our feature unit + if (entityID == UAC1_ENTITY_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_GET_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + { + int16_t vol = (int16_t) volume[channelNum]; + vol = vol * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &vol, sizeof(vol)); + } + + case AUDIO10_CS_REQ_GET_MIN: + TU_LOG2(" Get Volume min of channel: %u\r\n", channelNum); + { + int16_t min = -90; // -90 dB + min = min * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &min, sizeof(min)); + } + + case AUDIO10_CS_REQ_GET_MAX: + TU_LOG2(" Get Volume max of channel: %u\r\n", channelNum); + { + int16_t max = 30; // +30 dB + max = max * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &max, sizeof(max)); + } + + case AUDIO10_CS_REQ_GET_RES: + TU_LOG2(" Get Volume res of channel: %u\r\n", channelNum); + { + int16_t res = 128; // 0.5 dB + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &res, sizeof(res)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +//--------------------------------------------------------------------+ +// UAC2 Helper Functions +//--------------------------------------------------------------------+ + +#if TUD_OPT_HIGH_SPEED + +static bool audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { @@ -188,10 +351,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio20_control_request_ return false; } -// Helper for clock set requests -static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { - (void) rhport; - +static bool audio20_clock_set_request(audio20_control_request_t const *request, uint8_t const *buf) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); @@ -210,8 +370,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio20_control_request_ } } -// Helper for feature unit get requests -static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { @@ -238,10 +397,7 @@ static bool tud_audio_feature_unit_get_request(uint8_t rhport, audio20_control_r return false; } -// Helper for feature unit set requests -static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { - (void) rhport; - +static bool audio20_feature_unit_set_request(audio20_control_request_t const *request, uint8_t const *buf) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_FEATURE_UNIT); TU_VERIFY(request->bRequest == AUDIO20_CS_REQ_CUR); @@ -268,14 +424,13 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_r } } -// Invoked when audio class specific get request received for an entity -bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { +static bool audio20_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_get_request(rhport, request); + return audio20_clock_get_request(rhport, request); if (request->bEntityID == UAC2_ENTITY_FEATURE_UNIT) - return tud_audio_feature_unit_get_request(rhport, request); + return audio20_feature_unit_get_request(rhport, request); else { TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); @@ -283,31 +438,24 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p return false; } -// Invoked when audio class specific set request received for an entity -bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { +static bool audio20_set_req_entity(tusb_control_request_t const *p_request, uint8_t *buf) { audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; if (request->bEntityID == UAC2_ENTITY_FEATURE_UNIT) - return tud_audio_feature_unit_set_request(rhport, request, buf); + return audio20_feature_unit_set_request(request, buf); if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio_clock_set_request(rhport, request, buf); + return audio20_clock_set_request(request, buf); TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); return false; } -bool tud_audio_set_itf_close_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); - uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); - - if (ITF_NUM_AUDIO_STREAMING == itf && alt == 0) - blink_interval_ms = BLINK_MOUNTED; +#endif // TUD_OPT_HIGH_SPEED - return true; -} +//--------------------------------------------------------------------+ +// Main Callback Functions +//--------------------------------------------------------------------+ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; @@ -325,6 +473,75 @@ bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_reques return true; } +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + (void) pBuff; + + if (tud_audio_version() == 1) { + return audio10_set_req_ep(p_request, pBuff); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_ep(rhport, p_request); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_set_req_entity(p_request, buf); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_set_req_entity(p_request, buf); +#endif + } + + return false; +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_entity(rhport, p_request); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_get_req_entity(rhport, p_request); +#endif + } + + return false; +} + +bool tud_audio_set_itf_close_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + if (ITF_NUM_AUDIO_STREAMING == itf && alt == 0) + blink_interval_ms = BLINK_MOUNTED; + + return true; +} + void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedback_params_t *feedback_param) { (void) func_id; (void) alt_itf; @@ -349,16 +566,6 @@ bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t fu } #endif -#if CFG_QUIRK_OS_GUESSING -bool tud_audio_feedback_format_correction_cb(uint8_t func_id) { - (void) func_id; - if (tud_speed_get() == TUSB_SPEED_FULL && quirk_os_guessing_get() == QUIRK_OS_GUESSING_OSX) { - return true; - } else { - return false; - } -} -#endif //--------------------------------------------------------------------+ // AUDIO Task //--------------------------------------------------------------------+ diff --git a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c b/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c deleted file mode 100644 index 92b9ab6ee..000000000 --- a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 HiFiPhile - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "quirk_os_guessing.h" - -static tusb_desc_type_t desc_req_buf[2]; -static int desc_req_idx = 0; - -// Place at the start of tud_descriptor_device_cb() -void quirk_os_guessing_desc_device_cb(void) { - desc_req_idx = 0; -} - -// Place at the start of tud_descriptor_configuration_cb() -void quirk_os_guessing_desc_configuration_cb(void) { - // Skip redundant request - if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_CONFIGURATION)) { - desc_req_buf[desc_req_idx++] = TUSB_DESC_CONFIGURATION; - } -} - -// Place at the start of tud_descriptor_bos_cb() -void quirk_os_guessing_desc_bos_cb(void) { - // Skip redundant request - if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_BOS)) { - desc_req_buf[desc_req_idx++] = TUSB_DESC_BOS; - } -} - -// Place at the start of tud_descriptor_string_cb() -void quirk_os_guessing_desc_string_cb(void) { - // Skip redundant request - if (desc_req_idx == 0 || (desc_req_idx == 1 && desc_req_buf[0] != TUSB_DESC_STRING)) { - desc_req_buf[desc_req_idx++] = TUSB_DESC_STRING; - } -} - -// Each OS request descriptors differently: -// Windows 10 - 11 -// Device Desc -// Config Desc -// BOS Desc -// String Desc -// Linux 3.16 - 6.8 -// Device Desc -// BOS Desc -// Config Desc -// String Desc -// OS X Ventura - Sonoma -// Device Desc -// String Desc -// Config Desc || BOS Desc -// BOS Desc || Config Desc -quirk_os_guessing_t quirk_os_guessing_get(void) { - if (desc_req_idx < 2) { - return QUIRK_OS_GUESSING_UNKNOWN; - } - - if (desc_req_buf[0] == TUSB_DESC_BOS && desc_req_buf[1] == TUSB_DESC_CONFIGURATION) { - return QUIRK_OS_GUESSING_LINUX; - } else if (desc_req_buf[0] == TUSB_DESC_CONFIGURATION && desc_req_buf[1] == TUSB_DESC_BOS) { - return QUIRK_OS_GUESSING_WINDOWS; - } else if (desc_req_buf[0] == TUSB_DESC_STRING && (desc_req_buf[1] == TUSB_DESC_BOS || desc_req_buf[1] == TUSB_DESC_CONFIGURATION)) { - return QUIRK_OS_GUESSING_OSX; - } - - return QUIRK_OS_GUESSING_UNKNOWN; -} diff --git a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.h b/examples/device/uac2_speaker_fb/src/quirk_os_guessing.h deleted file mode 100644 index 1120355c9..000000000 --- a/examples/device/uac2_speaker_fb/src/quirk_os_guessing.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 HiFiPhile - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#ifndef _QUIRK_OS_GUESSING_H_ -#define _QUIRK_OS_GUESSING_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#include "tusb.h" - -//================================== !!! WARNING !!! ==================================== -// This quirk operate out of USB specification in order to workaround specific issues. -// It may not work on your platform. -//======================================================================================= -// -// Prerequisites: -// - Set USB version to at least 2.01 in Device Descriptor -// - Has a valid BOS Descriptor, refer to webusb_serial example -// -// Attention: -// Windows detection result comes out after Configuration Descriptor request, -// meaning it will be too late to do descriptor adjustment. It's advised to make -// Windows as default configuration and adjust to other OS accordingly. - -typedef enum { - QUIRK_OS_GUESSING_UNKNOWN, - QUIRK_OS_GUESSING_LINUX, - QUIRK_OS_GUESSING_OSX, - QUIRK_OS_GUESSING_WINDOWS, -} quirk_os_guessing_t; - -// Get Host OS type -quirk_os_guessing_t quirk_os_guessing_get(void); - -// Place at the start of tud_descriptor_device_cb() -void quirk_os_guessing_desc_device_cb(void); - -// Place at the start of tud_descriptor_configuration_cb() -void quirk_os_guessing_desc_configuration_cb(void); - -// Place at the start of tud_descriptor_bos_cb() -void quirk_os_guessing_desc_bos_cb(void); - -// Place at the start of tud_descriptor_string_cb() -void quirk_os_guessing_desc_string_cb(void); - -#ifdef __cplusplus - } -#endif - -#endif /* _QUIRK_OS_GUESSING_H_ */ diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index 3bf082096..b91a9ea5a 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -87,14 +87,6 @@ extern "C" { #define CFG_TUSB_MEM_ALIGN __attribute__ ((aligned(4))) #endif -/* (Needed for Full-Speed only) - * Enable host OS guessing to workaround UAC2 compatibility issues between Windows and OS X - * The default configuration only support Windows and Linux, enable this option for OS X - * support. Otherwise if you don't need Windows support you can make OS X's configuration as - * default. - */ -#define CFG_QUIRK_OS_GUESSING 1 - //-------------------------------------------------------------------- // DEVICE CONFIGURATION //-------------------------------------------------------------------- @@ -128,33 +120,33 @@ extern "C" { // AUDIO CLASS DRIVER CONFIGURATION //-------------------------------------------------------------------- -// Can be enabled with Full-Speed device on OSX, which forces feedback EP size to 3, in this case CFG_QUIRK_OS_GUESSING can be disabled -#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_FORMAT_CORRECTION 0 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX 2 -// Audio format type I specifications -#if defined(__RX__) -#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 48000 -#else -#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE 96000 -#endif +// 16bit data in 16bit slots +#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX 2 +#define CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX 16 -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX 2 +// UAC1 Full-Speed endpoint size +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_FS 48000 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_FS, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +// UAC2 High-Speed endpoint size +#define CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_HS 96000 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE_HS, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -// 16bit in 16bit slots -#define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX 2 -#define CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX 16 +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS) -// EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) -#define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 +// AUDIO_FEEDBACK_METHOD_FIFO_COUNT needs buffer size >= 4* EP size to work correctly +// Example read FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS, 32 * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device +// Enable OUT EP +#define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 // Enable feedback EP -#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 1 +#define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 1 // Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 #ifdef __cplusplus } diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.c b/examples/device/uac2_speaker_fb/src/usb_descriptors.c index 9e12c88b4..610a8f255 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.c +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.c @@ -28,10 +28,6 @@ #include "usb_descriptors.h" #include "common_types.h" -#ifdef CFG_QUIRK_OS_GUESSING -#include "quirk_os_guessing.h" -#endif - /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC. * @@ -49,7 +45,7 @@ tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0201, + .bcdUSB = 0x0200, // Use Interface Association Descriptor (IAD) for Audio // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1) @@ -71,12 +67,8 @@ tusb_desc_device_t const desc_device = // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_device_cb(); -#endif - return (uint8_t const *)&desc_device; +uint8_t const * tud_descriptor_device_cb(void) { + return (uint8_t const *) &desc_device; } #if CFG_AUDIO_DEBUG @@ -84,8 +76,7 @@ uint8_t const * tud_descriptor_device_cb(void) // HID Report Descriptor //--------------------------------------------------------------------+ -uint8_t const desc_hid_report[] = -{ +uint8_t const desc_hid_report[] = { HID_USAGE_PAGE_N ( HID_USAGE_PAGE_VENDOR, 2 ),\ HID_USAGE ( 0x01 ),\ HID_COLLECTION ( HID_COLLECTION_APPLICATION ),\ @@ -101,8 +92,7 @@ uint8_t const desc_hid_report[] = // Invoked when received GET HID REPORT DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) -{ +uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) { (void) itf; return desc_hid_report; } @@ -112,109 +102,126 @@ uint8_t const * tud_hid_descriptor_report_cb(uint8_t itf) // Configuration Descriptor //--------------------------------------------------------------------+ -#if CFG_AUDIO_DEBUG - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) -#else - #define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN) -#endif - #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... + #define EPNUM_AUDIO 0x03 #define EPNUM_AUDIO_FB 0x03 - #define EPNUM_AUDIO_OUT 0x03 #define EPNUM_DEBUG 0x04 -#elif CFG_TUSB_MCU == OPT_MCU_NRF5X - // ISO endpoints for NRF5x are fixed to 0x08 (0x88) +#elif TU_CHECK_MCU(OPT_MCU_NRF5X) + // nRF5x ISO can only be endpoint 8 + #define EPNUM_AUDIO 0x08 #define EPNUM_AUDIO_FB 0x08 - #define EPNUM_AUDIO_OUT 0x08 #define EPNUM_DEBUG 0x01 #elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h // e.g EP1 OUT & EP1 IN cannot exist together + #define EPNUM_AUDIO 0x02 #define EPNUM_AUDIO_FB 0x01 - #define EPNUM_AUDIO_OUT 0x02 #define EPNUM_DEBUG 0x03 #else + #define EPNUM_AUDIO 0x01 #define EPNUM_AUDIO_FB 0x01 - #define EPNUM_AUDIO_OUT 0x01 #define EPNUM_DEBUG 0x02 #endif -uint8_t const desc_configuration_default[] = -{ - // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), +#if CFG_AUDIO_DEBUG + #define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(2) + TUD_HID_DESC_LEN) +#else + #define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(2)) +#endif + +uint8_t const desc_uac1_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), - // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 4), + // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, sample rates (44.1kHz, 48kHz) + TUD_AUDIO10_SPEAKER_STEREO_FB_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 5, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_FS, EPNUM_AUDIO_FB | 0x80, 44100, 48000), #if CFG_AUDIO_DEBUG - // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) #endif }; -#if CFG_QUIRK_OS_GUESSING -// OS X needs 3 bytes feedback endpoint on FS -uint8_t const desc_configuration_osx_fs[] = -{ - // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), +TU_VERIFY_STATIC(sizeof(desc_uac1_configuration) == CONFIG_UAC1_TOTAL_LEN, "Incorrect size"); - // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, - TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(0, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO_OUT, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX, EPNUM_AUDIO_FB | 0x80, 3), +#if TUD_OPT_HIGH_SPEED #if CFG_AUDIO_DEBUG - // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) -#endif -}; + #define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN + TUD_HID_DESC_LEN) +#else + #define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_SPEAKER_STEREO_FB_DESC_LEN) #endif -// Invoked when received GET CONFIGURATION DESCRIPTOR -// Application return pointer to descriptor -// Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ - (void)index; // for multiple configurations +uint8_t const desc_uac2_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_configuration_cb(); - if(tud_speed_get() == TUSB_SPEED_FULL && quirk_os_guessing_get() == QUIRK_OS_GUESSING_OSX) { - return desc_configuration_osx_fs; - } -#endif - return desc_configuration_default; -} + // Interface number, string index, byte per sample, bit per sample, EP Out, EP size, EP feedback, feedback EP size, + TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 4, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_RESOLUTION_RX, EPNUM_AUDIO, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_HS, EPNUM_AUDIO_FB | 0x80, 4), -//--------------------------------------------------------------------+ -// BOS Descriptor, required for OS guessing quirk -//--------------------------------------------------------------------+ +#if CFG_AUDIO_DEBUG + // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval + TUD_HID_DESCRIPTOR(ITF_NUM_DEBUG, 0, HID_ITF_PROTOCOL_NONE, sizeof(desc_hid_report), EPNUM_DEBUG | 0x80, CFG_TUD_HID_EP_BUFSIZE, 7) +#endif +}; -#define TUD_BOS_USB20_EXT_DESC_LEN 7 +TU_VERIFY_STATIC(sizeof(desc_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); -#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_USB20_EXT_DESC_LEN) +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, -// BOS Descriptor is required for webUSB -uint8_t const desc_bos[] = -{ - // total length, number of device caps - TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - // USB 2.0 Extension Descriptor - 0x07, TUSB_DESC_DEVICE_CAPABILITY, DEVICE_CAPABILITY_USB20_EXTENSION, 0x00, 0x00, 0x00,0x00 + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 }; -uint8_t const * tud_descriptor_bos_cb(void) -{ -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_bos_cb(); +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const *tud_descriptor_device_qualifier_cb(void) { + return (uint8_t const *) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index;// for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_uac1_configuration : desc_uac2_configuration; +} + +#endif // highspeed + +// Invoked when received GET CONFIGURATION DESCRIPTOR +// Application return pointer to descriptor +// Descriptor contents must exist long enough for transfer to complete +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { + (void) index; // for multiple configurations +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + if(tud_speed_get() == TUSB_SPEED_FULL) { + return desc_uac1_configuration; + } else { + return desc_uac2_configuration; + } +#else + return desc_uac1_configuration; #endif - return desc_bos; } //--------------------------------------------------------------------+ @@ -237,6 +244,7 @@ char const *string_desc_arr[] = "TinyUSB Speaker", // 2: Product NULL, // 3: Serials will use unique ID if possible "UAC2 Speaker", // 4: Audio Interface + "UAC1 Speaker", // 5: UAC1 Audio Interface }; static uint16_t _desc_str[32 + 1]; @@ -247,10 +255,6 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { (void) langid; size_t chr_count; -#if CFG_QUIRK_OS_GUESSING - quirk_os_guessing_desc_string_cb(); -#endif - switch ( index ) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index f71411dcf..4ae6ab616 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -26,6 +26,10 @@ #ifndef _USB_DESCRIPTORS_H_ #define _USB_DESCRIPTORS_H_ +//--------------------------------------------------------------------+ +// UAC2 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ + // Defined in TUD_AUDIO20_SPEAKER_STEREO_FB_DESCRIPTOR #define UAC2_ENTITY_CLOCK 0x04 #define UAC2_ENTITY_INPUT_TERMINAL 0x01 @@ -89,13 +93,13 @@ #define UAC1_ENTITY_OUTPUT_TERMINAL 0x03 #define TUD_AUDIO10_SPEAKER_STEREO_FB_DESC_LEN(_nfreqs) (\ - + TUD_AUDIO_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_STD_AC_LEN\ + TUD_AUDIO10_DESC_CS_AC_LEN(1)\ + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)\ - + TUD_AUDIO20_DESC_STD_AS_LEN\ - + TUD_AUDIO20_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ @@ -124,9 +128,9 @@ /* Type I Format Type Descriptor(2.2.5) */\ TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x02, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freqs*/ __VA_ARGS__),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ - TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_sync_ep*/ _epfb),\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_sync_ep*/ _epfb),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ - TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Synch Endpoint Descriptor (4.6.2.1) */\ TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 4) diff --git a/src/device/usbd.h b/src/device/usbd.h index 184cfea5e..9c61c5ef8 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -433,6 +433,11 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ #define TUD_AUDIO10_DESC_CS_AS_ISO_EP(_attr, _lockdelayunits, _lockdelay) \ TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN, TUSB_DESC_CS_ENDPOINT, AUDIO10_CS_EP_SUBTYPE_GENERAL, _attr, _lockdelayunits, U16_TO_U8S_LE(_lockdelay) +/* Standard AS Isochronous Synch Endpoint Descriptor UAC1 (4.6.2.1) */ +#define TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP_LEN 9 +#define TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(_ep, _bRefresh) \ + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP_LEN, TUSB_DESC_ENDPOINT, _ep, TUSB_XFER_ISOCHRONOUS, U16_TO_U8S_LE(3), 1, _bRefresh, 0x00 + /* Standard AC Interrupt Endpoint Descriptor UAC1 (4.4.2) */ #define TUD_AUDIO10_DESC_STD_AC_INT_EP_LEN 9 #define TUD_AUDIO10_DESC_STD_AC_INT_EP(_ep, _interval) \ @@ -460,7 +465,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Standard AC Interface Descriptor(4.3.1) */\ TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ - TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1), /*_itf*/ ((_itfnum)+1)),\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ (TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1)), /*_itf*/ ((_itfnum)+1)),\ /* Input Terminal Descriptor(4.3.2.1) */\ TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ 0x01, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x03, /*_nchannels*/ 0x01, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.3.2.2) */\ @@ -474,7 +479,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x00),\ /* Class-Specific AS Interface Descriptor(4.5.2) */\ - TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x00, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ 0x03, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample, /*_bitresolution*/ _nBitsUsedPerSample, /*_freq*/ __VA_ARGS__),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ -- cgit v1.3.1 From 9f75b32ac11e93bb7551f7f577b72792c696ba33 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 29 Sep 2025 20:59:29 +0200 Subject: Add UAC1 support to audio_test_multi_rate example Signed-off-by: HiFiPhile --- examples/device/audio_test_multi_rate/src/main.c | 321 +++++++++++++++------ .../device/audio_test_multi_rate/src/tusb_config.h | 24 +- .../audio_test_multi_rate/src/usb_descriptors.c | 85 ++++-- .../audio_test_multi_rate/src/usb_descriptors.h | 4 +- 4 files changed, 318 insertions(+), 116 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 2e8a1dba5..9e9c32e8d 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -80,9 +80,6 @@ static const uint8_t bytesPerSampleAltList[CFG_TUD_AUDIO_FUNC_1_N_FORMATS] = CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, }; -audio20_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// Volume range state - - // Audio test data CFG_TUD_MEM_ALIGN uint8_t test_buffer_audio[(TUD_OPT_HIGH_SPEED ? 8 : 1) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; uint16_t startVal = 0; @@ -111,9 +108,6 @@ int main(void) { led_blinking_task(); audio_task(); } - - - return 0; } //--------------------------------------------------------------------+ @@ -176,71 +170,184 @@ void audio_task(void) { // Application Callback API Implementations //--------------------------------------------------------------------+ -// Invoked when set interface is called, typically on start/stop streaming or format change -bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); - uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); +//--------------------------------------------------------------------+ +// UAC1 Helper Functions +//--------------------------------------------------------------------+ - // Clear buffer when streaming format is changed - if (alt != 0) { - bytesPerSample = bytesPerSampleAltList[alt - 1]; +static bool audio10_set_req_ep(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + // Request uses 3 bytes + TU_VERIFY(p_request->wLength == 3); + + sampFreq = tu_unaligned_read32(pBuff) & 0x00FFFFFF; + + TU_LOG2("EP set current freq: %" PRIu32 "\r\n", sampFreq); + + return true; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; } - return true; + + return false; } -// Invoked when audio class specific set request received for an EP -bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { - (void) rhport; - (void) pBuff; +static bool audio10_get_req_ep(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_GET_CUR) { + TU_LOG2("EP get current freq\r\n"); + + uint8_t freq[3]; + freq[0] = (uint8_t) (sampFreq & 0xFF); + freq[1] = (uint8_t) ((sampFreq >> 8) & 0xFF); + freq[2] = (uint8_t) ((sampFreq >> 16) & 0xFF); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, freq, sizeof(freq)); + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} - // Page 91 in UAC2 specification +static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t ep = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); - (void) channelNum; - (void) ctrlSel; - (void) ep; + // If request is for our feature unit (ID defined in usbd.h) + if (entityID == 0x02) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength ==1); - return false;// Yet not implemented -} + mute[channelNum] = pBuff[0]; -// Invoked when audio class specific set request received for an interface -bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { - (void) rhport; - (void) pBuff; + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; - // We do not support any set range requests here, only current value requests - TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); + default: + return false; // not supported + } - // Page 91 in UAC2 specification + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 2); + + volume[channelNum] = (int16_t)tu_unaligned_read16(pBuff) / 256; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t itf = TU_U16_LOW(p_request->wIndex); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our feature unit (ID defined in usbd.h) + if (entityID == 0x02) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); - (void) channelNum; - (void) ctrlSel; - (void) itf; + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_GET_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + { + int16_t vol = (int16_t) volume[channelNum]; + vol = vol * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &vol, sizeof(vol)); + } - return false;// Yet not implemented + case AUDIO10_CS_REQ_GET_MIN: + TU_LOG2(" Get Volume min of channel: %u\r\n", channelNum); + { + int16_t min = -90; // -90 dB + min = min * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &min, sizeof(min)); + } + + case AUDIO10_CS_REQ_GET_MAX: + TU_LOG2(" Get Volume max of channel: %u\r\n", channelNum); + { + int16_t max = 30; // +30 dB + max = max * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &max, sizeof(max)); + } + + case AUDIO10_CS_REQ_GET_RES: + TU_LOG2(" Get Volume res of channel: %u\r\n", channelNum); + { + int16_t res = 1; // 1 dB + res = res * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &res, sizeof(res)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; } -// Invoked when audio class specific set request received for an entity -bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { - (void) rhport; +//--------------------------------------------------------------------+ +// UAC2 Helper Functions +//--------------------------------------------------------------------+ + +#if TUD_OPT_HIGH_SPEED - // Page 91 in UAC2 specification +static bool audio20_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t itf = TU_U16_LOW(p_request->wIndex); uint8_t entityID = TU_U16_HIGH(p_request->wIndex); - (void) itf; - // We do not support any set range requests here, only current value requests TU_VERIFY(p_request->bRequest == AUDIO20_CS_REQ_CUR); @@ -292,51 +399,12 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } } - return false;// Yet not implemented -} - -// Invoked when audio class specific get request received for an EP -bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - // Page 91 in UAC2 specification - uint8_t channelNum = TU_U16_LOW(p_request->wValue); - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t ep = TU_U16_LOW(p_request->wIndex); - - (void) channelNum; - (void) ctrlSel; - (void) ep; - - // return tud_control_xfer(rhport, p_request, &tmp, 1); - - return false;// Yet not implemented -} - -// Invoked when audio class specific get request received for an interface -bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - // Page 91 in UAC2 specification - uint8_t channelNum = TU_U16_LOW(p_request->wValue); - uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - uint8_t itf = TU_U16_LOW(p_request->wIndex); - - (void) channelNum; - (void) ctrlSel; - (void) itf; - - return false;// Yet not implemented + return false; } -// Invoked when audio class specific get request received for an entity -bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { - (void) rhport; - - // Page 91 in UAC2 specification +static bool audio20_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { uint8_t channelNum = TU_U16_LOW(p_request->wValue); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - // uint8_t itf = TU_U16_LOW(p_request->wIndex); // Since we have only one audio function implemented, we do not need the itf value uint8_t entityID = TU_U16_HIGH(p_request->wIndex); // Input terminal (Microphone input) @@ -449,7 +517,82 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } } - TU_LOG2(" Unsupported entity: %d\r\n", entityID); + return false; +} + +#endif // TUD_OPT_HIGH_SPEED + +//--------------------------------------------------------------------+ +// Main Callback Functions +//--------------------------------------------------------------------+ + +// Invoked when set interface is called, typically on start/stop streaming or format change +bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + //uint8_t const itf = tu_u16_low(tu_le16toh(p_request->wIndex)); + uint8_t const alt = tu_u16_low(tu_le16toh(p_request->wValue)); + + // Clear buffer when streaming format is changed + if (alt != 0) { + bytesPerSample = bytesPerSampleAltList[alt - 1]; + } + return true; +} + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + (void) pBuff; + + if (tud_audio_version() == 1) { + return audio10_set_req_ep(p_request, pBuff); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_ep(rhport, p_request); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific set request received for an entity +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_set_req_entity(p_request, pBuff); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_set_req_entity(p_request, pBuff); +#endif + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an entity +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_entity(rhport, p_request); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_get_req_entity(rhport, p_request); +#endif + } + return false;// Yet not implemented } diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index 9a73a2cd9..49cebf9c4 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -116,22 +116,30 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX 2 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 -// 24bit in 32bit slots +// 24bit in 32bit slots (UAC2 only) #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer +#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer -#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! +#define CFG_TUD_AUDIO_ENABLE_EP_IN 1 +#define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +// UAC1 (Full-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example write FIFO every 1ms, so it should be 8 times larger for HS device +// UAC2 (High-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +// Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) + +// Tx flow control needs buffer size >= 4* EP size to work correctly +// Example write FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) #ifdef __cplusplus } diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index afdf95b79..69d3d2812 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -41,8 +41,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = -{ +tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, .bcdUSB = 0x0200, @@ -67,23 +66,19 @@ tusb_desc_device_t const desc_device = // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ +uint8_t const * tud_descriptor_device_cb(void) { return (uint8_t const *) &desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -enum -{ +enum { ITF_NUM_AUDIO_CONTROL = 0, ITF_NUM_AUDIO_STREAMING, ITF_NUM_TOTAL }; -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + CFG_TUD_AUDIO * TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN) - #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... @@ -97,24 +92,81 @@ enum #define EPNUM_AUDIO 0x01 #endif -uint8_t const desc_configuration[] = -{ +#define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_MIC_ONE_CH_DESC_LEN(3)) + +uint8_t const desc_uac1_configuration[] = { + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, EP Out & EP In address, EP size + TUD_AUDIO10_MIC_ONE_CH_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_nBytesPerSample*/ 2, /*_nBitsUsedPerSample*/ 16, /*_epin*/ 0x80 | EPNUM_AUDIO, /*_epsize*/ CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, 32000, 48000, 96000) +}; + +TU_VERIFY_STATIC(sizeof(desc_uac1_configuration) == CONFIG_UAC1_TOTAL_LEN, "Incorrect size"); + +#if TUD_OPT_HIGH_SPEED +#define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESC_LEN) + +uint8_t const desc2_uac2_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size TUD_AUDIO20_MIC_ONE_CH_2_FORMAT_DESCRIPTOR(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_stridx*/ 0, /*_epin*/ 0x80 | EPNUM_AUDIO) }; -TU_VERIFY_STATIC(sizeof(desc_configuration) == CONFIG_TOTAL_LEN, "Incorrect size"); +TU_VERIFY_STATIC(sizeof(desc2_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 +}; + +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const *tud_descriptor_device_qualifier_cb(void) { + return (uint8_t const *) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) { + (void) index;// for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_uac1_configuration : desc2_uac2_configuration; +} + +#endif// highspeed // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void) index; // for multiple configurations - return desc_configuration; +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + if(tud_speed_get() == TUSB_SPEED_FULL) { + return desc_uac1_configuration; + } else { + return desc2_uac2_configuration; + } +#else + return desc_uac1_configuration; +#endif } //--------------------------------------------------------------------+ @@ -130,8 +182,7 @@ enum { }; // array of pointer to string descriptors -char const* string_desc_arr [] = -{ +char const* string_desc_arr [] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "PaniRCorp", // 1: Manufacturer "MicNode", // 2: Product diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index adf3305d2..c02f40cd9 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -84,7 +84,7 @@ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ @@ -94,7 +94,7 @@ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ TUD_AUDIO20_DESC_TYPE_I_FORMAT(CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX),\ /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\ - TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ + TUD_AUDIO20_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN, /*_interval*/ 0x01),\ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) -- cgit v1.3.1 From d5108589b6f3bb1139523765c9cc625c56b08832 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 30 Sep 2025 23:16:44 +0200 Subject: Minor fixes Signed-off-by: HiFiPhile --- examples/device/audio_test_multi_rate/src/main.c | 4 ++-- examples/device/uac2_speaker_fb/src/common_types.h | 2 +- examples/device/uac2_speaker_fb/src/main.c | 4 ++-- src/class/audio/audio_device.c | 11 ++++------- src/common/tusb_compiler.h | 2 +- src/device/usbd.c | 2 +- 6 files changed, 11 insertions(+), 14 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 9e9c32e8d..55a649613 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -60,7 +60,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Audio controls // Current states bool mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1]; // +1 for master channel 0 -uint16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// +1 for master channel 0 +int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX + 1];// +1 for master channel 0 uint32_t sampFreq; uint8_t bytesPerSample; uint8_t clkValid; @@ -367,7 +367,7 @@ static bool audio20_set_req_entity(tusb_control_request_t const *p_request, uint // Request uses format layout 2 TU_VERIFY(p_request->wLength == sizeof(audio20_control_cur_2_t)); - volume[channelNum] = (uint16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; + volume[channelNum] = (int16_t) ((audio20_control_cur_2_t *) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/uac2_speaker_fb/src/common_types.h b/examples/device/uac2_speaker_fb/src/common_types.h index 174e26671..b79ae2fd0 100644 --- a/examples/device/uac2_speaker_fb/src/common_types.h +++ b/examples/device/uac2_speaker_fb/src/common_types.h @@ -41,7 +41,7 @@ typedef struct { uint32_t sample_rate; uint8_t alt_settings; - int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; + uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; uint16_t fifo_size; uint16_t fifo_count; diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 936da4c80..aef933936 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -74,7 +74,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Audio controls // Current states -int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 +uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1];// +1 for master channel 0 // Buffer for speaker data @@ -212,7 +212,7 @@ static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint switch (p_request->bRequest) { case AUDIO10_CS_REQ_SET_CUR: // Only 1st form is supported - TU_VERIFY(p_request->wLength ==1); + TU_VERIFY(p_request->wLength == 1); mute[channelNum] = pBuff[0]; diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 961aa7260..9fa55acc5 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -460,7 +460,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t *func_id); static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id); static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id); -static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); +static inline uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t const *p_desc); @@ -1810,7 +1810,7 @@ static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t c p_desc = tu_desc_next(p_desc);// Exclude standard AS interface descriptor of current alternate interface descriptor - if (tud_audio_n_version(audio - _audiod_fct) == 1) { + if (tud_audio_n_version(audiod_get_audio_fct_idx(audio)) == 1) { p_desc = tu_desc_next(p_desc);// Exclude Class-Specific AS Interface Descriptor(4.5.2) to get to format type descriptor if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO10_CS_AS_INTERFACE_FORMAT_TYPE) { audio->format_type_tx = ((audio10_desc_type_I_format_n_t(1) const *) p_desc)->bFormatType; @@ -1910,11 +1910,8 @@ static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t da #endif // No security checks here - internal function only which should always succeed -static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio) { - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO; cnt++) { - if (&_audiod_fct[cnt] == audio) return cnt; - } - return 0; +static inline uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio) { + return (uint8_t) (audio - _audiod_fct); } #endif // (CFG_TUD_ENABLED && CFG_TUD_AUDIO) diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index b0dae6488..9c16ac3df 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -118,7 +118,7 @@ #define _TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s _TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) #define _TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s _TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) -// Apply an macro X to each of the arguments and expand the result wtih comma +// Apply an macro X to each of the arguments and expand the result with comma #define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(_TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) #define _TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) diff --git a/src/device/usbd.c b/src/device/usbd.c index f1065a649..9d241c168 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1101,7 +1101,7 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) AUDIO10_CS_AC_INTERFACE_HEADER == ((audio10_desc_cs_ac_interface_1_t const *) p)->bDescriptorSubType) { audio10_desc_cs_ac_interface_1_t const * p_header = (audio10_desc_cs_ac_interface_1_t const *) p; // AC + AS interfaces - assoc_itf_count = tu_le16toh(p_header->bInCollection) + 1; + assoc_itf_count = p_header->bInCollection + 1; break; } p = tu_desc_next(p); -- cgit v1.3.1 From cd9266bf3dc331684aff2146e0484e8cd59efadf Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 1 Oct 2025 21:21:04 +0200 Subject: Add note about bRefresh value Signed-off-by: HiFiPhile --- .../device/uac2_speaker_fb/src/usb_descriptors.h | 35 +++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) (limited to 'examples') diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index 4ae6ab616..b0ec60ea1 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -132,6 +132,39 @@ /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Standard AS Isochronous Synch Endpoint Descriptor (4.6.2.1) */\ - TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 4) + TUD_AUDIO10_DESC_STD_AS_ISO_SYNC_EP(/*_ep*/ _epfb, /*_bRefresh*/ 0) + +//---------------------------------------------------------------------------+ +// UAC1 Isochronous Synch Endpoint bRefresh Workaround +// +// bRefresh value is set to 0, while UAC1 spec requires it to be between +// 1 (2 ms) and 9 (512 ms) +// +// This value has been tested to work with Windows, macOS and Linux. +// +// Rationale: +// Some USB device controllers (e.g. Synopsys DWC2) require a known transfer +// interval to manually schedule isochronous IN transfers. For data isochronous +// endpoints, the bInterval field in the endpoint descriptor is used. However, +// for synch endpoint it's unclear which field the host uses to determine the +// transfer interval. Windows and macOS use bRefresh, while Linux uses bInterval. +// +// Since bInterval is fixed to 1, if bRefresh is set to 2 then Windows and macOS +// will schedule the feedback transfer every 4 ms, but Linux will schedule it +// every 1 ms. DWC2 controller cannot handle this discrepancy without knwowing +// the actual interval, therefore we set bRefresh to 0 to let the transfer +// execute every 1 ms, which is the same as bInterval. +// +// Rant: +// WTF USB-IF? Why have two fields that mean the same thing? Why not just use +// bInterval for both data and synch endpoints? Why is bRefresh even necessary? +// +// Note: +// For the moment DWC2 driver doesn't have proper support for bInterval > 1 +// for isochronous IN endpoints. The implementation would be complex and CPU +// intensive (cfr. +// https://github.com/torvalds/linux/blob/master/drivers/usb/dwc2/gadget.c) +// It MAY work in some cases if you are lucky, but it's not guaranteed. +//---------------------------------------------------------------------------+ #endif -- cgit v1.3.1 From d322207441d55f636be911899f1c7928ba6b00b7 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 2 Oct 2025 23:59:24 +0200 Subject: Add UAC1 support to uac2_headset example Signed-off-by: HiFiPhile --- examples/device/uac2_headset/src/main.c | 277 +++++++++++++++++++-- examples/device/uac2_headset/src/tusb_config.h | 42 ++-- examples/device/uac2_headset/src/usb_descriptors.c | 79 +++++- examples/device/uac2_headset/src/usb_descriptors.h | 107 +++++++- src/class/audio/audio_device.c | 4 +- 5 files changed, 448 insertions(+), 61 deletions(-) (limited to 'examples') diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 31b2f3ee3..f6d3c041d 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -141,8 +141,185 @@ void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } +//--------------------------------------------------------------------+ +// Audio Callback Functions +//--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// UAC1 Helper Functions +//--------------------------------------------------------------------+ + +static bool audio10_set_req_ep(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { + // Request uses 3 bytes + TU_VERIFY(p_request->wLength == 3); + + current_sample_rate = tu_unaligned_read32(pBuff) & 0x00FFFFFF; + + TU_LOG2("EP set current freq: %" PRIu32 "\r\n", current_sample_rate); + + return true; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_get_req_ep(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + + switch (ctrlSel) { + case AUDIO10_EP_CTRL_SAMPLING_FREQ: + if (p_request->bRequest == AUDIO10_CS_REQ_GET_CUR) { + TU_LOG2("EP get current freq\r\n"); + + uint8_t freq[3]; + freq[0] = (uint8_t) (current_sample_rate & 0xFF); + freq[1] = (uint8_t) ((current_sample_rate >> 8) & 0xFF); + freq[2] = (uint8_t) ((current_sample_rate >> 16) & 0xFF); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, freq, sizeof(freq)); + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + + return false; +} + +static bool audio10_set_req_entity(tusb_control_request_t const *p_request, uint8_t *pBuff) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our speaker feature unit + if (entityID == UAC1_ENTITY_SPK_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 1); + + mute[channelNum] = pBuff[0]; + + TU_LOG2(" Set Mute: %d of channel: %u\r\n", mute[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_SET_CUR: + // Only 1st form is supported + TU_VERIFY(p_request->wLength == 2); + + volume[channelNum] = (int16_t)tu_unaligned_read16(pBuff) / 256; + + TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); + return true; + + default: + return false; // not supported + } + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { + uint8_t channelNum = TU_U16_LOW(p_request->wValue); + uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); + uint8_t entityID = TU_U16_HIGH(p_request->wIndex); + + // If request is for our speaker feature unit + if (entityID == UAC1_ENTITY_SPK_FEATURE_UNIT) { + switch (ctrlSel) { + case AUDIO10_FU_CTRL_MUTE: + // Audio control mute cur parameter block consists of only one byte - we thus can send it right away + // There does not exist a range parameter block for mute + TU_LOG2(" Get Mute of channel: %u\r\n", channelNum); + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &mute[channelNum], 1); + + case AUDIO10_FU_CTRL_VOLUME: + switch (p_request->bRequest) { + case AUDIO10_CS_REQ_GET_CUR: + TU_LOG2(" Get Volume of channel: %u\r\n", channelNum); + { + int16_t vol = (int16_t) volume[channelNum]; + vol = vol * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &vol, sizeof(vol)); + } + + case AUDIO10_CS_REQ_GET_MIN: + TU_LOG2(" Get Volume min of channel: %u\r\n", channelNum); + { + int16_t min = -90; // -90 dB + min = min * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &min, sizeof(min)); + } + + case AUDIO10_CS_REQ_GET_MAX: + TU_LOG2(" Get Volume max of channel: %u\r\n", channelNum); + { + int16_t max = 30; // +30 dB + max = max * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &max, sizeof(max)); + } + + case AUDIO10_CS_REQ_GET_RES: + TU_LOG2(" Get Volume res of channel: %u\r\n", channelNum); + { + int16_t res = 1; // 1 dB + res = res * 256; // convert to 1/256 dB units + return tud_audio_buffer_and_schedule_control_xfer(rhport, p_request, &res, sizeof(res)); + } + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + break; + + // Unknown/Unsupported control + default: + TU_BREAKPOINT(); + return false; + } + } + + return false; +} + +//--------------------------------------------------------------------+ +// UAC2 Helper Functions +//--------------------------------------------------------------------+ + +#if TUD_OPT_HIGH_SPEED + // Helper for clock get requests -static bool tud_audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); if (request->bControlSelector == AUDIO20_CS_CTRL_SAM_FREQ) { @@ -177,7 +354,7 @@ static bool tud_audio20_clock_get_request(uint8_t rhport, audio20_control_reques } // Helper for clock set requests -static bool tud_audio20_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool audio20_clock_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); @@ -199,7 +376,7 @@ static bool tud_audio20_clock_set_request(uint8_t rhport, audio20_control_reques } // Helper for feature unit get requests -static bool tud_audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { +static bool audio20_feature_unit_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); if (request->bControlSelector == AUDIO20_FU_CTRL_MUTE && request->bRequest == AUDIO20_CS_REQ_CUR) { @@ -227,7 +404,7 @@ static bool tud_audio20_feature_unit_get_request(uint8_t rhport, audio20_control } // Helper for feature unit set requests -static bool tud_audio20_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { +static bool audio20_feature_unit_set_request(uint8_t rhport, audio20_control_request_t const *request, uint8_t const *buf) { (void) rhport; TU_ASSERT(request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT); @@ -256,25 +433,72 @@ static bool tud_audio20_feature_unit_set_request(uint8_t rhport, audio20_control } } -//--------------------------------------------------------------------+ -// Application Callback API Implementations -//--------------------------------------------------------------------+ +static bool audio20_get_req_entity(uint8_t rhport, tusb_control_request_t const *p_request) { + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return audio20_clock_get_request(rhport, request); + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return audio20_feature_unit_get_request(rhport, request); + else { + TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + } + return false; +} + +static bool audio20_set_req_entity(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { + audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + return audio20_feature_unit_set_request(rhport, request, buf); + if (request->bEntityID == UAC2_ENTITY_CLOCK) + return audio20_clock_set_request(rhport, request, buf); + TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", + request->bEntityID, request->bControlSelector, request->bRequest); + + return false; +} + +#endif // TUD_OPT_HIGH_SPEED + +// Invoked when audio class specific set request received for an EP +bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { + (void) rhport; + (void) pBuff; + + if (tud_audio_version() == 1) { + return audio10_set_req_ep(p_request, pBuff); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} + +// Invoked when audio class specific get request received for an EP +bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + + if (tud_audio_version() == 1) { + return audio10_get_req_ep(rhport, p_request); + } else if (tud_audio_version() == 2) { + // We do not support any requests here + } + + return false;// Yet not implemented +} // Invoked when audio class specific get request received for an entity bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { + (void) rhport; + if (tud_audio_version() == 1) { - // No entity in UAC1 - } else { - audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; - - if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio20_clock_get_request(rhport, request); - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio20_feature_unit_get_request(rhport, request); - else { - TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", - request->bEntityID, request->bControlSelector, request->bRequest); - } + return audio10_get_req_entity(rhport, p_request); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_get_req_entity(rhport, p_request); +#endif } return false; @@ -282,14 +506,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p // Invoked when audio class specific set request received for an entity bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { - audio20_control_request_t const *request = (audio20_control_request_t const *) p_request; + (void) rhport; - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) - return tud_audio20_feature_unit_set_request(rhport, request, buf); - if (request->bEntityID == UAC2_ENTITY_CLOCK) - return tud_audio20_clock_set_request(rhport, request, buf); - TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", - request->bEntityID, request->bControlSelector, request->bRequest); + if (tud_audio_version() == 1) { + return audio10_set_req_entity(p_request, buf); +#if TUD_OPT_HIGH_SPEED + } else if (tud_audio_version() == 2) { + return audio20_set_req_entity(rhport, p_request, buf); +#endif + } return false; } diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 5e6211cc0..339fb81a6 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -124,37 +124,45 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX 2 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX 16 -#if defined(__RX__) -// 8bit in 8bit slots -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 8 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 8 -#else -// 24bit in 32bit slots +// 24bit in 32bit slots (UAC2 only) #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX 4 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_TX 24 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX 4 #define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_RESOLUTION_RX 24 -#endif // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +// UAC1 (Full-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +// UAC2 (High-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) + +// Maximum EP IN size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_IN, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_IN) // Maximum EP IN size for all AS alternate settings used -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device +// Tx flow control needs buffer size >= 4* EP size to work correctly +// Example write FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_IN, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_IN)) // EP and buffer size - for isochronous EP´s, the buffer and EP size are equal (different sizes would not make sense) #define CFG_TUD_AUDIO_ENABLE_EP_OUT 1 -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) -#define CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(TUD_OPT_HIGH_SPEED, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +// UAC1 (Full-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(false, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) + +// UAC2 (High-Speed) Endpoint size calculation +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) +#define CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT TUD_AUDIO_EP_SIZE(true, CFG_TUD_AUDIO_FUNC_1_MAX_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX) + +// Maximum EP OUT size for all AS alternate settings used +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, TU_MAX(CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT)) -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_2_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used -#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device +// Rx flow control needs buffer size >= 4* EP size to work correctly +// Example read FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device +#define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT)) // Size of control request buffer #define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index bc9160d5e..b7e024e9e 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -110,22 +110,93 @@ uint8_t const * tud_descriptor_device_cb(void) #define EPNUM_AUDIO_INT 0x02 #endif -uint8_t const desc_configuration[] = +#define CONFIG_UAC1_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO10_HEADSET_STEREO_DESC_LEN(2)) + +uint8_t const desc_uac1_configuration[] = +{ + // Config number, interface count, string index, total length, attribute, power in mA + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), + + // Interface number, string index, bytes per sample RX/TX, bits used per sample RX/TX, EP Out & EP In address, EP sizes, sample rate + TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 2, \ + CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX, \ + CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX, \ + EPNUM_AUDIO_OUT, CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, \ + EPNUM_AUDIO_IN | 0x80, CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_IN, \ + 44100, 48000) +}; + +TU_VERIFY_STATIC(sizeof(desc_uac1_configuration) == CONFIG_UAC1_TOTAL_LEN, "Incorrect size"); + +#if TUD_OPT_HIGH_SPEED + +#define CONFIG_UAC2_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_AUDIO20_HEADSET_STEREO_DESC_LEN) + +uint8_t const desc_uac2_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100), + TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) + TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) +}; + +TU_VERIFY_STATIC(sizeof(desc_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); + + +// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed +tusb_desc_device_qualifier_t const desc_device_qualifier = +{ + .bLength = sizeof(tusb_desc_device_qualifier_t), + .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, + .bcdUSB = 0x0200, + + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, + + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bNumConfigurations = 0x01, + .bReserved = 0x00 }; +// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete. +// device_qualifier descriptor describes information about a high-speed capable device that would +// change if the device were operating at the other speed. If not highspeed capable stall this request. +uint8_t const *tud_descriptor_device_qualifier_cb(void) +{ + return (uint8_t const *) &desc_device_qualifier; +} + +// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request +// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete +// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa +uint8_t const *tud_descriptor_other_speed_configuration_cb(uint8_t index) +{ + (void) index; // for multiple configurations + + // if link speed is high return fullspeed config, and vice versa + return (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_uac1_configuration : desc_uac2_configuration; +} +#endif + // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { (void)index; // for multiple configurations - return desc_configuration; +#if TUD_OPT_HIGH_SPEED + // Although we are highspeed, host may be fullspeed. + if(tud_speed_get() == TUSB_SPEED_FULL) { + return desc_uac1_configuration; + } else { + return desc_uac2_configuration; + } +#else + return desc_uac1_configuration; +#endif } //--------------------------------------------------------------------+ diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index 465fa6035..b6ebe2ae4 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -26,7 +26,17 @@ #ifndef _USB_DESCRIPTORS_H_ #define _USB_DESCRIPTORS_H_ -// #include "tusb.h" +enum +{ + ITF_NUM_AUDIO_CONTROL = 0, + ITF_NUM_AUDIO_STREAMING_SPK, + ITF_NUM_AUDIO_STREAMING_MIC, + ITF_NUM_TOTAL +}; + +//--------------------------------------------------------------------+ +// UAC2 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ // Unit numbers are arbitrary selected #define UAC2_ENTITY_CLOCK 0x04 @@ -38,15 +48,7 @@ #define UAC2_ENTITY_MIC_INPUT_TERMINAL 0x11 #define UAC2_ENTITY_MIC_OUTPUT_TERMINAL 0x13 -enum -{ - ITF_NUM_AUDIO_CONTROL = 0, - ITF_NUM_AUDIO_STREAMING_SPK, - ITF_NUM_AUDIO_STREAMING_MIC, - ITF_NUM_TOTAL -}; - -#define TUD_AUDIO_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ +#define TUD_AUDIO20_HEADSET_STEREO_DESC_LEN (TUD_AUDIO20_DESC_IAD_LEN\ + TUD_AUDIO20_DESC_STD_AC_LEN\ + TUD_AUDIO20_DESC_CS_AC_LEN\ + TUD_AUDIO20_DESC_CLK_SRC_LEN\ @@ -85,7 +87,7 @@ enum + TUD_AUDIO20_DESC_STD_AS_ISO_EP_LEN\ + TUD_AUDIO20_DESC_CS_AS_ISO_EP_LEN) -#define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin, _epint) \ +#define TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin, _epint) \ /* Standard Interface Association Descriptor (IAD) */\ TUD_AUDIO20_DESC_IAD(/*_firstitf*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\ /* Standard AC Interface Descriptor(4.7.1) */\ @@ -95,7 +97,7 @@ enum /* Clock Source Descriptor(4.7.2.1) */\ TUD_AUDIO20_DESC_CLK_SRC(/*_clkid*/ UAC2_ENTITY_CLOCK, /*_attr*/ 3, /*_ctrl*/ 7, /*_assocTerm*/ 0x00, /*_stridx*/ 0x00), \ /* Input Terminal Descriptor(4.7.2.4) */\ - TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x02, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Feature Unit Descriptor(4.7.2.8) */\ TUD_AUDIO20_DESC_FEATURE_UNIT(/*_unitid*/ UAC2_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlch0master*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch1*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS), /*_ctrlch2*/ (AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_MUTE_POS | AUDIO20_CTRL_RW << AUDIO20_FEATURE_UNIT_CTRL_VOLUME_POS)),\ /* Output Terminal Descriptor(4.7.2.5) */\ @@ -103,7 +105,7 @@ enum /* Input Terminal Descriptor(4.7.2.4) */\ TUD_AUDIO20_DESC_INPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_nchannelslogical*/ 0x01, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_ctrl*/ 0 * (AUDIO20_CTRL_R << AUDIO20_IN_TERM_CTRL_CONNECTOR_POS), /*_stridx*/ 0x00),\ /* Output Terminal Descriptor(4.7.2.5) */\ - TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ 0x00, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ + TUD_AUDIO20_DESC_OUTPUT_TERM(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_srcid*/ UAC2_ENTITY_MIC_INPUT_TERMINAL, /*_clkid*/ UAC2_ENTITY_CLOCK, /*_ctrl*/ 0x0000, /*_stridx*/ 0x00),\ /* Standard AC Interrupt Endpoint Descriptor(4.8.2.1) */\ TUD_AUDIO20_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ @@ -155,4 +157,83 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000) +//--------------------------------------------------------------------+ +// UAC1 DESCRIPTOR TEMPLATES +//--------------------------------------------------------------------+ + +// UAC1 entity IDs for speaker and microphone +// Speaker path +#define UAC1_ENTITY_SPK_INPUT_TERMINAL 0x01 +#define UAC1_ENTITY_SPK_FEATURE_UNIT 0x02 +#define UAC1_ENTITY_SPK_OUTPUT_TERMINAL 0x03 +// Microphone path +#define UAC1_ENTITY_MIC_INPUT_TERMINAL 0x11 +#define UAC1_ENTITY_MIC_OUTPUT_TERMINAL 0x13 + +#define TUD_AUDIO10_HEADSET_STEREO_DESC_LEN(_nfreqs) (\ + +TUD_AUDIO10_DESC_STD_AC_LEN\ + + TUD_AUDIO10_DESC_CS_AC_LEN(2)\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_INPUT_TERM_LEN\ + + TUD_AUDIO10_DESC_OUTPUT_TERM_LEN\ + /* Interface 1, Alternate 0 (speaker) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + /* Interface 1, Alternate 1 (speaker) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN\ + /* Interface 2, Alternate 0 (microphone) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + /* Interface 2, Alternate 1 (microphone) */\ + + TUD_AUDIO10_DESC_STD_AS_LEN\ + + TUD_AUDIO10_DESC_CS_AS_INT_LEN\ + + TUD_AUDIO10_DESC_TYPE_I_FORMAT_LEN(_nfreqs)\ + + TUD_AUDIO10_DESC_STD_AS_ISO_EP_LEN\ + + TUD_AUDIO10_DESC_CS_AS_ISO_EP_LEN) + + +#define TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample_RX, _nBitsUsedPerSample_RX, _nBytesPerSample_TX, _nBitsUsedPerSample_TX, _epout, _epoutsize, _epin, _epinsize, ...) \ + /* Standard AC Interface Descriptor(4.3.1) */\ + TUD_AUDIO10_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ + /* Class-Specific AC Interface Header Descriptor(4.3.2) */\ + TUD_AUDIO10_DESC_CS_AC(/*_bcdADC*/ 0x0100, /*_totallen*/ (TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(2)+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN+TUD_AUDIO10_DESC_INPUT_TERM_LEN+TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(1)+TUD_AUDIO10_DESC_OUTPUT_TERM_LEN), /*_itf*/ ((_itfnum)+1), ((_itfnum)+2)),\ + /* Speaker Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_nchannels*/ 0x02, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Speaker Feature Unit Descriptor(4.3.2.5) */\ + TUD_AUDIO10_DESC_FEATURE_UNIT(/*_unitid*/ UAC1_ENTITY_SPK_FEATURE_UNIT, /*_srcid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_stridx*/ 0x00, /*_ctrlmaster*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch1*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME), /*_ctrlch2*/ (AUDIO10_FU_CONTROL_BM_MUTE | AUDIO10_FU_CONTROL_BM_VOLUME)),\ + /* Speaker Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ UAC1_ENTITY_SPK_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_OUT_HEADPHONES, /*_assocTerm*/ 0x00, /*_srcid*/ UAC1_ENTITY_SPK_FEATURE_UNIT, /*_stridx*/ 0x00),\ + /* Microphone Input Terminal Descriptor(4.3.2.1) */\ + TUD_AUDIO10_DESC_INPUT_TERM(/*_termid*/ UAC1_ENTITY_MIC_INPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_IN_GENERIC_MIC, /*_assocTerm*/ 0x00, /*_nchannels*/ 0x01, /*_channelcfg*/ AUDIO10_CHANNEL_CONFIG_NON_PREDEFINED, /*_idxchannelnames*/ 0x00, /*_stridx*/ 0x00),\ + /* Microphone Output Terminal Descriptor(4.3.2.2) */\ + TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_srcid*/ UAC1_ENTITY_MIC_INPUT_TERMINAL, /*_stridx*/ 0x00),\ + /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 0 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 1 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x02, /*_subframesize*/ _nBytesPerSample_RX, /*_bitresolution*/ _nBitsUsedPerSample_RX, /*_freqs*/ __VA_ARGS__),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ADAPTIVE), /*_maxEPsize*/ _epoutsize, /*_interval*/ 0x01, /*_syncep*/ 0x00),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ + /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 0 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 1 */\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + /* Class-Specific AS Interface Descriptor(4.5.2) */\ + TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ + /* Type I Format Type Descriptor(2.2.5) */\ + TUD_AUDIO10_DESC_TYPE_I_FORMAT(/*_nrchannels*/ 0x01, /*_subframesize*/ _nBytesPerSample_TX, /*_bitresolution*/ _nBitsUsedPerSample_TX, /*_freqs*/ __VA_ARGS__),\ + /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.6.1.1) */\ + TUD_AUDIO10_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) ((uint8_t)TUSB_XFER_ISOCHRONOUS | (uint8_t)TUSB_ISO_EP_ATT_ASYNCHRONOUS), /*_maxEPsize*/ _epinsize, /*_interval*/ 0x01, /*_syncep*/ 0x00),\ + /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ + TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001) + #endif diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 1e001479c..4019e2850 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -912,7 +912,9 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { break; } else if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass == AUDIO_SUBCLASS_STREAMING) { - _audiod_fct[i].p_desc_as = p_desc; + if (_audiod_fct[i].p_desc_as == 0) { + _audiod_fct[i].p_desc_as = p_desc; + } } total_len += p_desc[0]; p_desc = tu_desc_next(p_desc); -- cgit v1.3.1 From 1ded8ac94c66eca996e2089bda7ac79fcf9ddd59 Mon Sep 17 00:00:00 2001 From: Mengsk Date: Fri, 3 Oct 2025 10:05:27 +0200 Subject: Update headset example Signed-off-by: Mengsk --- examples/device/uac2_headset/src/main.c | 6 +++++- examples/device/uac2_headset/src/usb_descriptors.c | 12 ++++++------ examples/device/uac2_headset/src/usb_descriptors.h | 20 ++++++++++---------- 3 files changed, 21 insertions(+), 17 deletions(-) (limited to 'examples') diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index f6d3c041d..96fa66f1e 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -73,7 +73,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Audio controls // Current states -int8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 +uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1];// +1 for master channel 0 // Buffer for microphone data @@ -610,6 +610,10 @@ void audio_control_task(void) { uint32_t btn = board_button_read(); + // Even UAC1 spec have status interrupt support like UAC2, most host do not support it + // So you have to either use UAC2 or use old day HID volume control + TU_VERIFY((tud_audio_version() == 1),); + if (!btn_prev && btn) { // Adjust volume between 0dB (100%) and -30dB (10%) for (int i = 0; i < CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1; i++) { diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index b7e024e9e..96e51769c 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -118,7 +118,7 @@ uint8_t const desc_uac1_configuration[] = TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC1_TOTAL_LEN, 0x00, 100), // Interface number, string index, bytes per sample RX/TX, bits used per sample RX/TX, EP Out & EP In address, EP sizes, sample rate - TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 2, \ + TUD_AUDIO10_HEADSET_STEREO_DESCRIPTOR(ITF_NUM_AUDIO_CONTROL, 4, \ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_RX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_RX, \ CFG_TUD_AUDIO_FUNC_1_FORMAT_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_RESOLUTION_TX, \ EPNUM_AUDIO_OUT, CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, \ @@ -137,8 +137,8 @@ uint8_t const desc_uac2_configuration[] = // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_UAC2_TOTAL_LEN, 0x00, 100), - // Interface number, string index, EP Out & EP In address, EP size - TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(2, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) + // String index, EP Out & EP In address, EP Interrupt address + TUD_AUDIO20_HEADSET_STEREO_DESCRIPTOR(5, EPNUM_AUDIO_OUT, EPNUM_AUDIO_IN | 0x80, EPNUM_AUDIO_INT | 0x80) }; TU_VERIFY_STATIC(sizeof(desc_uac2_configuration) == CONFIG_UAC2_TOTAL_LEN, "Incorrect size"); @@ -216,10 +216,10 @@ char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer - "TinyUSB headset", // 2: Product + "TinyUSB Headset", // 2: Product NULL, // 3: Serials will use unique ID if possible - "TinyUSB Speakers", // 4: Audio Interface - "TinyUSB Microphone", // 5: Audio Interface + "TinyUSB UAC1 Headset", // 4: Function + "TinyUSB UAC2 Headset", // 5: Function }; static uint16_t _desc_str[32 + 1]; diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index b6ebe2ae4..d673beace 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -110,10 +110,10 @@ enum TUD_AUDIO20_DESC_STD_AC_INT_EP(/*_ep*/ _epint, /*_interval*/ 0x01), \ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 1, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -123,7 +123,7 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Interface 1, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_SPK), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_SPK_INPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -134,10 +134,10 @@ enum TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 0 - default alternate setting with 0 bandwidth */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.9.1) */\ /* Interface 2, Alternate 1 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -147,7 +147,7 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\ TUD_AUDIO20_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO20_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_lockdelayunit*/ AUDIO20_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\ /* Interface 2, Alternate 2 - alternate interface for data streaming */\ - TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO20_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)(ITF_NUM_AUDIO_STREAMING_MIC), /*_altset*/ 0x02, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.9.2) */\ TUD_AUDIO20_DESC_CS_AS_INT(/*_termid*/ UAC2_ENTITY_MIC_OUTPUT_TERMINAL, /*_ctrl*/ AUDIO20_CTRL_NONE, /*_formattype*/ AUDIO20_FORMAT_TYPE_I, /*_formats*/ AUDIO20_DATA_FORMAT_TYPE_I_PCM, /*_nchannelsphysical*/ CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX, /*_channelcfg*/ AUDIO20_CHANNEL_CONFIG_NON_PREDEFINED, /*_stridx*/ 0x00),\ /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\ @@ -212,9 +212,9 @@ enum /* Microphone Output Terminal Descriptor(4.3.2.2) */\ TUD_AUDIO10_DESC_OUTPUT_TERM(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_termtype*/ AUDIO_TERM_TYPE_USB_STREAMING, /*_assocTerm*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_srcid*/ UAC1_ENTITY_MIC_INPUT_TERMINAL, /*_stridx*/ 0x00),\ /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 0 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x05),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.5.1) - Speaker Interface 1, Alternate 1 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x05),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+1), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.5.2) */\ TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_SPK_INPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ @@ -224,9 +224,9 @@ enum /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.6.1.2) */\ TUD_AUDIO10_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO10_CS_AS_ISO_DATA_EP_ATT_SAMPLING_FRQ, /*_lockdelayunits*/ AUDIO10_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_MILLISEC, /*_lockdelay*/ 0x0001),\ /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 0 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ 0x04),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x00, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\ /* Standard AS Interface Descriptor(4.5.1) - Microphone Interface 2, Alternate 1 */\ - TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ 0x04),\ + TUD_AUDIO10_DESC_STD_AS_INT(/*_itfnum*/ (uint8_t)((_itfnum)+2), /*_altset*/ 0x01, /*_nEPs*/ 0x01, /*_stridx*/ _stridx),\ /* Class-Specific AS Interface Descriptor(4.5.2) */\ TUD_AUDIO10_DESC_CS_AS_INT(/*_termid*/ UAC1_ENTITY_MIC_OUTPUT_TERMINAL, /*_delay*/ 0x01, /*_formattype*/ AUDIO10_DATA_FORMAT_TYPE_I_PCM),\ /* Type I Format Type Descriptor(2.2.5) */\ -- cgit v1.3.1 From 6acf49e4c2ce63a7a44a66b0dc499a96da1e49fd Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 5 Oct 2025 01:11:29 +0200 Subject: Use one control buffer as EP0 has no concurrency Signed-off-by: HiFiPhile --- .../device/audio_4_channel_mic/src/tusb_config.h | 2 - .../audio_4_channel_mic_freertos/src/tusb_config.h | 2 - examples/device/audio_test/src/tusb_config.h | 2 - .../device/audio_test_freertos/src/tusb_config.h | 2 - .../device/audio_test_multi_rate/src/tusb_config.h | 2 - examples/device/cdc_uac2/src/tusb_config.h | 3 - examples/device/uac2_headset/src/tusb_config.h | 3 - examples/device/uac2_speaker_fb/src/tusb_config.h | 3 - src/class/audio/audio_device.c | 63 ++++--------- src/class/audio/audio_device.h | 105 ++++++++++++--------- 10 files changed, 76 insertions(+), 111 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 6115f44bb..ef4e8a1fc 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -105,8 +105,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 7ce55aa77..26bd96d40 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -111,8 +111,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup diff --git a/examples/device/audio_test/src/tusb_config.h b/examples/device/audio_test/src/tusb_config.h index 32859b610..cb9554582 100644 --- a/examples/device/audio_test/src/tusb_config.h +++ b/examples/device/audio_test/src/tusb_config.h @@ -108,8 +108,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index ceb496e8d..76df6638c 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -114,8 +114,6 @@ extern "C" { // Have a look into audio_device.h for all configurations #define CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE 48000 -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX 2 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! diff --git a/examples/device/audio_test_multi_rate/src/tusb_config.h b/examples/device/audio_test_multi_rate/src/tusb_config.h index 49cebf9c4..78642f50f 100644 --- a/examples/device/audio_test_multi_rate/src/tusb_config.h +++ b/examples/device/audio_test_multi_rate/src/tusb_config.h @@ -122,8 +122,6 @@ extern "C" { // Have a look into audio_device.h for all configurations -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 // Size of control request buffer - #define CFG_TUD_AUDIO_ENABLE_EP_IN 1 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 1 // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor! diff --git a/examples/device/cdc_uac2/src/tusb_config.h b/examples/device/cdc_uac2/src/tusb_config.h index f1cff7e9a..ecba53ab8 100644 --- a/examples/device/cdc_uac2/src/tusb_config.h +++ b/examples/device/cdc_uac2/src/tusb_config.h @@ -155,9 +155,6 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX TU_MAX(CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT, CFG_TUD_AUDIO_FUNC_1_FORMAT_1_EP_SZ_OUT) // Maximum EP IN size for all AS alternate settings used #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX // Example read FIFO every 1ms, so it should be 8 times larger for HS device -// Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) #define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) diff --git a/examples/device/uac2_headset/src/tusb_config.h b/examples/device/uac2_headset/src/tusb_config.h index 339fb81a6..c7f1122b2 100644 --- a/examples/device/uac2_headset/src/tusb_config.h +++ b/examples/device/uac2_headset/src/tusb_config.h @@ -164,9 +164,6 @@ extern "C" { // Example read FIFO every 1ms (8 HS frames), so buffer size should be 8 times larger for HS device #define CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ TU_MAX(4 * CFG_TUD_AUDIO10_FUNC_1_FORMAT_1_EP_SZ_OUT, TU_MAX(32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_1_EP_SZ_OUT, 32 * CFG_TUD_AUDIO20_FUNC_1_FORMAT_2_EP_SZ_OUT)) -// Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #ifdef __cplusplus } #endif diff --git a/examples/device/uac2_speaker_fb/src/tusb_config.h b/examples/device/uac2_speaker_fb/src/tusb_config.h index b91a9ea5a..3f8ad5ea4 100644 --- a/examples/device/uac2_speaker_fb/src/tusb_config.h +++ b/examples/device/uac2_speaker_fb/src/tusb_config.h @@ -145,9 +145,6 @@ extern "C" { // Enable feedback EP #define CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP 1 -// Size of control request buffer -#define CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ 64 - #ifdef __cplusplus } #endif diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 1e74c21b4..dcdc0d4a9 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -181,15 +181,9 @@ tu_static CFG_TUD_MEM_SECTION struct { } lin_buf_out; #endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && USE_LINEAR_BUFFER -// Control buffers +// Control buffer tu_static CFG_TUD_MEM_SECTION struct { - TUD_EPBUF_DEF(buf1, CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ); - #if CFG_TUD_AUDIO > 1 - TUD_EPBUF_DEF(buf2, CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ); - #endif - #if CFG_TUD_AUDIO > 2 - TUD_EPBUF_DEF(buf3, CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ); - #endif + TUD_EPBUF_DEF(buf, CFG_TUD_AUDIO_CTRL_BUF_SZ); } ctrl_buf; // Aligned buffer for feedback EP @@ -219,6 +213,7 @@ typedef struct uint8_t rhport; uint8_t const *p_desc;// Pointer pointing to Standard AC Interface Descriptor(4.7.1) - Audio Control descriptor defining audio function uint8_t const *p_desc_as;// Pointer pointing to 1st Standard AS Interface Descriptor(4.9.1) - Audio Streaming descriptor defining audio function + uint16_t desc_length;// Length of audio function descriptor #if CFG_TUD_AUDIO_ENABLE_EP_IN uint8_t ep_in; // TX audio data EP. @@ -244,8 +239,6 @@ typedef struct bool mounted;// Device opened - uint16_t desc_length;// Length of audio function descriptor - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP struct { uint32_t value; // Feedback value for asynchronous mode (in 16.16 format). @@ -290,10 +283,6 @@ typedef struct /*------------- From this point, data is not cleared by bus reset -------------*/ - // Buffer for control requests - uint8_t *ctrl_buf; - uint8_t ctrl_buf_sz; - // EP Transfer buffers and FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_OUT tu_fifo_t ep_out_ff; @@ -327,7 +316,11 @@ typedef struct #define USE_LINEAR_BUFFER_RX 0 #endif -#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ctrl_buf) +#if CFG_TUD_AUDIO_ENABLE_EP_OUT +#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ep_out_ff) +#else +#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ep_in_ff) +#endif //--------------------------------------------------------------------+ // WEAK FUNCTION STUBS @@ -722,26 +715,6 @@ void audiod_init(void) { for (uint8_t i = 0; i < CFG_TUD_AUDIO; i++) { audiod_function_t *audio = &_audiod_fct[i]; - // Initialize control buffers - switch (i) { - case 0: - audio->ctrl_buf = ctrl_buf.buf1; - audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ; - break; -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ > 0 - case 1: - audio->ctrl_buf = ctrl_buf.buf2; - audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ; - break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ > 0 - case 2: - audio->ctrl_buf = ctrl_buf.buf3; - audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ; - break; -#endif - } - // Initialize IN EP FIFO if required #if CFG_TUD_AUDIO_ENABLE_EP_IN @@ -1341,20 +1314,20 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const if (tud_audio_n_version(func_id) == 2) { uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf); audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } #endif // Invoke callback - return tud_audio_set_req_entity_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + return tud_audio_set_req_entity_cb(rhport, p_request, ctrl_buf.buf); } else { // Find index of audio driver structure and verify interface really exists TU_VERIFY(audiod_verify_itf_exists(itf, &func_id)); // Invoke callback - return tud_audio_set_req_itf_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + return tud_audio_set_req_itf_cb(rhport, p_request, ctrl_buf.buf); } } break; @@ -1369,7 +1342,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const if (_audiod_fct[func_id].ep_in == ep) { uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (ctrlSel == AUDIO10_EP_CTRL_SAMPLING_FREQ && p_request->bRequest == AUDIO10_CS_REQ_SET_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf) & 0x00FFFFFF; + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf) & 0x00FFFFFF; audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } @@ -1377,7 +1350,7 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const #endif // Invoke callback - bool ret = tud_audio_set_req_ep_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); + bool ret = tud_audio_set_req_ep_cb(rhport, p_request, ctrl_buf.buf); #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP if (ret && tud_audio_n_version(func_id) == 1) { @@ -1474,7 +1447,7 @@ static bool audiod_control_request(uint8_t rhport, tusb_control_request_t const } // If we end here, the received request is a set request - we schedule a receive for the data stage and return true here. We handle the rest later in audiod_control_complete() once the data stage was finished - TU_VERIFY(tud_control_xfer(rhport, p_request, _audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz)); + TU_VERIFY(tud_control_xfer(rhport, p_request, ctrl_buf.buf, sizeof(ctrl_buf.buf))); return true; } @@ -1735,10 +1708,10 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req } // Crop length - if (len > _audiod_fct[func_id].ctrl_buf_sz) len = _audiod_fct[func_id].ctrl_buf_sz; + if (len > sizeof(ctrl_buf.buf)) len = sizeof(ctrl_buf.buf); // Copy into buffer - TU_VERIFY(0 == tu_memcpy_s(_audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz, data, (size_t) len)); + TU_VERIFY(0 == tu_memcpy_s(ctrl_buf.buf, sizeof(ctrl_buf.buf), data, (size_t) len)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL if (tud_audio_n_version(func_id) == 2) { @@ -1747,7 +1720,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req uint8_t entityID = TU_U16_HIGH(p_request->wIndex); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO20_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO20_CS_REQ_CUR) { - _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); + _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(ctrl_buf.buf); audiod_calc_tx_packet_sz(&_audiod_fct[func_id]); } } @@ -1755,7 +1728,7 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req #endif // Schedule transmit - return tud_control_xfer(rhport, p_request, (void *) _audiod_fct[func_id].ctrl_buf, len); + return tud_control_xfer(rhport, p_request, ctrl_buf.buf, len); } // Verify an entity with the given ID exists and returns also the corresponding driver index diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 39212472a..eb916cd1c 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -37,21 +37,10 @@ // All sizes are in bytes! -// Size of control buffer used to receive and send control messages via EP0 - has to be big enough to hold your biggest request structure e.g. range requests with multiple intervals defined or cluster descriptors -#ifndef CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ -#error You must define an audio class control request buffer size! -#endif - -#if CFG_TUD_AUDIO > 1 -#ifndef CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ -#error You must define an audio class control request buffer size! -#endif -#endif - -#if CFG_TUD_AUDIO > 2 -#ifndef CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ -#error You must define an audio class control request buffer size! -#endif +// Size of control buffer used to receive and send control messages via EP0 - has to be big enough to hold your +// biggest request structure e.g. range requests with multiple intervals defined or cluster descriptors +#ifndef CFG_TUD_AUDIO_CTRL_BUF_SZ +#define CFG_TUD_AUDIO_CTRL_BUF_SZ 64 #endif // End point sizes IN BYTES - Limits: Full Speed <= 1023, High Speed <= 1024 @@ -153,7 +142,8 @@ #endif #endif -// (For TYPE-I format only) Flow control is necessary to allow IN ep send correct amount of data, unless it's a virtual device where data is perfectly synchronized to USB clock. +// (For TYPE-I format only) Flow control is necessary to allow IN ep send correct amount of data, unless it's a +// virtual device where data is perfectly synchronized to USB clock. #ifndef CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 #endif @@ -230,12 +220,15 @@ static inline bool tud_audio_int_write (const audio_interru #endif // Buffer control EP data and schedule a transmit -// This function is intended to be used if you do not have a persistent buffer or memory location available (e.g. non-local variables) and need to answer onto a -// get request. This function buffers your answer request frame into the control buffer of the corresponding audio driver and schedules a transmit for sending it. -// Since transmission is triggered via interrupts, a persistent memory location is required onto which the buffer pointer in pointing. If you already have such -// available you may directly use 'tud_control_xfer(...)'. In this case data does not need to be copied into an additional buffer and you save some time. +// This function is intended to be used if you do not have a persistent buffer or memory location available +// (e.g. non-local variables) and need to answer onto a get request. This function buffers your answer request +// frame into the control buffer of the corresponding audio driver and schedules a transmit for sending it. +// Since transmission is triggered via interrupts, a persistent memory location is required onto which the buffer +// pointer in pointing. If you already have such available you may directly use 'tud_control_xfer(...)'. In this +// case data does not need to be copied into an additional buffer and you save some time. // If the request's wLength is zero, a status packet is sent instead. -bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_request_t const * p_request, void* data, uint16_t len); +bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_request_t const * p_request, + void* data, uint16_t len); //--------------------------------------------------------------------+ // Application Callback API @@ -243,14 +236,18 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req #if CFG_TUD_AUDIO_ENABLE_EP_IN // Invoked in ISR context once an audio packet was sent successfully. -// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), call tud_audio_write() in I2S receive callback. -bool tud_audio_tx_done_isr(uint8_t rhport, uint16_t n_bytes_sent, uint8_t func_id, uint8_t ep_in, uint8_t cur_alt_setting); +// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), +// call tud_audio_write() in I2S receive callback. +bool tud_audio_tx_done_isr(uint8_t rhport, uint16_t n_bytes_sent, uint8_t func_id, uint8_t ep_in, + uint8_t cur_alt_setting); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT // Invoked in ISR context once an audio packet was received successfully. -// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), call tud_audio_read() in I2S transmit callback. -bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t func_id, uint8_t ep_out, uint8_t cur_alt_setting); +// Normally this function is not needed, since the data transfer should be driven by audio clock (i.e. I2S clock), +// call tud_audio_read() in I2S transmit callback. +bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t func_id, uint8_t ep_out, + uint8_t cur_alt_setting); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -259,41 +256,55 @@ bool tud_audio_rx_done_isr(uint8_t rhport, uint16_t n_bytes_received, uint8_t fu // // Option 1 - AUDIO_FEEDBACK_METHOD_FIFO_COUNT // Feedback value is calculated within the audio driver by regulating the FIFO level to half fill. -// Advantage: No ISR interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus less CPU load, well tested -// (Windows, Linux, OSX) with a reliable result so far. -// Disadvantage: A FIFO of minimal 4 frames is needed to compensate for jitter, an average delay of 2 frames is introduced. +// Advantage: No SOF interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus +// less CPU load, well tested (Windows, Linux, OSX) with a reliable result so far. +// Disadvantage: A FIFO of minimal 4 frames is needed to compensate for jitter, an average delay of 2 frames is +// introduced. // // Option 2 - AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED / AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT -// Feedback value is calculated within the audio driver by use of SOF interrupt. The driver needs information about the master clock f_m from -// which the audio sample frequency f_s is derived, f_s itself, and the cycle count of f_m at time of the SOF interrupt (e.g. by use of a hardware counter). +// Feedback value is calculated within the audio driver by use of SOF interrupt. The driver needs information +// about the master clock f_m from which the audio sample frequency f_s is derived, f_s itself, and the cycle +// count of f_m at time of the SOF interrupt (e.g. by use of a hardware counter). // See tud_audio_set_fb_params() and tud_audio_feedback_update() -// Advantage: Reduced jitter in the feedback value computation, hence, the receive FIFO can be smaller and thus a smaller delay is possible. -// Disadvantage: higher CPU load due to SOF ISR handling every frame i.e. 1ms or 125us. (The most critical point is the reading of the cycle counter value of f_m. -// It is read from within the SOF ISR - see: audiod_sof() -, hence, the ISR must has a high priority such that no software dependent "random" delay i.e. jitter is introduced). -// Long-term drift could occur since error is accumulated. +// Advantage: Reduced jitter in the feedback value computation, hence, the receive FIFO can be smaller and thus a +// smaller delay is possible. +// Disadvantage: higher CPU load due to SOF ISR handling every frame i.e. 1ms or 125us. (The most critical point +// is the reading of the cycle counter value of f_m. It is read from within the SOF ISR - see: audiod_sof() -, +// hence, the ISR must has a high priority such that no software dependent "random" delay i.e. jitter is +// introduced). Long-term drift will cause the FIFO under/overflow, you still needs to correct it somehow. // // Option 3 - manual -// Determined by the user itself and set by use of tud_audio_n_fb_set(). The feedback value may be determined e.g. from some fill status of some FIFO buffer. -// Advantage: No ISR interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus less CPU load. -// Disadvantage: typically a larger FIFO is needed to compensate for jitter (e.g. 6 frames), i.e. a larger delay is introduced. +// Determined by the user itself and set by use of tud_audio_n_fb_set(). The feedback value may be determined +// e.g. from some fill status of some FIFO buffer. +// Advantage: No ISR interrupt is enabled, hence the CPU need not to handle an ISR every 1ms or 125us and thus +// less CPU load. +// Disadvantage: typically a larger FIFO is needed to compensate for jitter (e.g. 6 frames), i.e. a larger delay +// is introduced. -// This function is used to provide data rate feedback from an asynchronous sink. Feedback value will be sent at FB endpoint interval till it's changed. +// This function is used to provide data rate feedback from an asynchronous sink. Feedback value will be sent at +// FB endpoint interval till it's changed. // -// The feedback format is specified to be 16.16 for HS and 10.14 for FS devices (see Universal Serial Bus Specification Revision 2.0 5.12.4.2). -// For simplicity, this function always uses 16.16 format. For FS devices, the driver will automatically convert the value to 10.14 format. +// The feedback format is specified to be 16.16 for HS and 10.14 for FS devices (see Universal Serial Bus +// Specification Revision 2.0 5.12.4.2). For simplicity, this function always uses 16.16 format. For FS devices, +// the driver will automatically convert the value to 10.14 format. // -// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 devices. On Linux and it seems the -// driver can work with either format. +// Note that due to a bug in its USB Audio 2.0 driver, Windows currently requires 16.16 format for _all_ USB 2.0 +// devices. On Linux and it seems the driver can work with either format. // -// Feedback value can be determined from within the SOF ISR of the audio driver. This should reduce jitter. If the feature is used, the user can not set the feedback value. +// Feedback value can be determined from within the SOF ISR of the audio driver. This should reduce jitter. If the +// feature is used, the user can not set the feedback value. // // Determine feedback value - The feedback method is described in 5.12.4.2 of the USB 2.0 spec // Boiled down, the feedback value Ff = n_samples / (micro)frame. -// Since an accuracy of less than 1 Sample / second is desired, at least n_frames = ceil(2^K * f_s / f_m) frames need to be measured, where K = 10 for full speed and K = 13 -// for high speed, f_s is the sampling frequency e.g. 48 kHz and f_m is the cpu clock frequency e.g. 100 MHz (or any other master clock whose clock count is available and locked to f_s) -// The update interval in the (4.10.2.1) Feedback Endpoint Descriptor must be less or equal to 2^(K - P), where P = min( ceil(log2(f_m / f_s)), K) -// feedback = n_cycles / n_frames * f_s / f_m in 16.16 format, where n_cycles are the number of main clock cycles within fb_n_frames +// Since an accuracy of less than 1 Sample / second is desired, at least n_frames = ceil(2^K * f_s / f_m) frames +// need to be measured, where K = 10 for full speed and K = 13 for high speed, f_s is the sampling frequency +// e.g. 48 kHz and f_m is the cpu clock frequency e.g. 100 MHz (or any other master clock whose clock count is +// available and locked to f_s) +// The update interval in the (4.10.2.1) Feedback Endpoint Descriptor must be less or equal to 2^(K - P), where +// P = min( ceil(log2(f_m / f_s)), K) +// feedback = n_cycles / n_frames * f_s / f_m in 16.16 format, where n_cycles are the number of main clock cycles +// within fb_n_frames bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback); // Update feedback value with passed MCLK cycles since last time this update function is called. -- cgit v1.3.1 From bda7efb1b3d482b7add2535a4a72f51a0dea5c08 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 10:46:09 +0700 Subject: fix #2942, include stdio if CFG_TUSB_DEBUG > 0 and CFG_TUSB_DEBUG_PRINTF is not defined --- examples/host/cdc_msc_hid/src/app.h | 2 ++ examples/host/cdc_msc_hid/src/hid_app.c | 1 - examples/host/cdc_msc_hid/src/msc_app.c | 1 + examples/host/cdc_msc_hid_freertos/src/app.h | 2 ++ examples/host/cdc_msc_hid_freertos/src/msc_app.c | 2 ++ examples/host/hid_controller/src/app.h | 2 ++ examples/host/msc_file_explorer/src/main.c | 1 - examples/host/msc_file_explorer/src/msc_app.h | 1 + src/class/net/ncm_device.c | 4 ---- src/common/tusb_common.h | 9 +++++---- src/common/tusb_debug.h | 1 + src/common/tusb_types.h | 6 +++--- src/common/tusb_verify.h | 4 +--- 13 files changed, 20 insertions(+), 16 deletions(-) (limited to 'examples') diff --git a/examples/host/cdc_msc_hid/src/app.h b/examples/host/cdc_msc_hid/src/app.h index bf15c7bea..49783b4ae 100644 --- a/examples/host/cdc_msc_hid/src/app.h +++ b/examples/host/cdc_msc_hid/src/app.h @@ -26,6 +26,8 @@ #ifndef TUSB_TINYUSB_EXAMPLES_APP_H #define TUSB_TINYUSB_EXAMPLES_APP_H +#include + void cdc_app_task(void); void hid_app_task(void); diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index f6a83aeed..eb20356cb 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -22,7 +22,6 @@ * THE SOFTWARE. * */ - #include "bsp/board_api.h" #include "tusb.h" #include "app.h" diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index 0e9c99766..dd4e22d7f 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -23,6 +23,7 @@ * */ +#include #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/examples/host/cdc_msc_hid_freertos/src/app.h b/examples/host/cdc_msc_hid_freertos/src/app.h index 960f7e8cc..8892a1b6b 100644 --- a/examples/host/cdc_msc_hid_freertos/src/app.h +++ b/examples/host/cdc_msc_hid_freertos/src/app.h @@ -26,6 +26,8 @@ #ifndef TUSB_TINYUSB_EXAMPLES_APP_H #define TUSB_TINYUSB_EXAMPLES_APP_H +#include + void cdc_app_init(void); void hid_app_init(void); void msc_app_init(void); diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index a6e3ed4ee..fa864c364 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -23,6 +23,8 @@ * */ +#include + #include "tusb.h" #include "app.h" diff --git a/examples/host/hid_controller/src/app.h b/examples/host/hid_controller/src/app.h index 1f9015cd2..b4d072668 100644 --- a/examples/host/hid_controller/src/app.h +++ b/examples/host/hid_controller/src/app.h @@ -26,6 +26,8 @@ #ifndef TUSB_TINYUSB_EXAMPLES_APP_H #define TUSB_TINYUSB_EXAMPLES_APP_H +#include + void hid_app_task(void); #endif diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 506c3b015..f9ec0ff5f 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -56,7 +56,6 @@ */ #include -#include #include #include "bsp/board_api.h" diff --git a/examples/host/msc_file_explorer/src/msc_app.h b/examples/host/msc_file_explorer/src/msc_app.h index 3ba03d0dc..a99da5b5c 100644 --- a/examples/host/msc_file_explorer/src/msc_app.h +++ b/examples/host/msc_file_explorer/src/msc_app.h @@ -27,6 +27,7 @@ #define MSC_APP_H #include +#include bool msc_app_init(void); void msc_app_task(void); diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 02833c5f1..ea3c250fe 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -50,10 +50,6 @@ #if (CFG_TUD_ENABLED && CFG_TUD_NCM) -#include -#include -#include - #include "device/usbd.h" #include "device/usbd_pvt.h" diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 6aa7e0bfc..6d7adc3a1 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -77,7 +77,6 @@ #include #include #include -#include // Tinyusb Common Headers #include "tusb_option.h" @@ -126,7 +125,7 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i return -1; } - memset(dest, ch, count); + (void) memset(dest, ch, count); return 0; } @@ -146,7 +145,7 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, c return -1; } - memcpy(dest, src, count); + (void) memcpy(dest, src, count); return 0; } @@ -231,7 +230,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_round_up(uint32_t v, uint32_t f) // TODO use clz TODO remove TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_log2(uint32_t value) { uint8_t result = 0; - while (value >>= 1) { result++; } + while ((value >>= 1) != 0) { + result++; + } return result; } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index e3f9d3f18..df4034098 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -55,6 +55,7 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); extern int CFG_TUSB_DEBUG_PRINTF(const char *format, ...); #define tu_printf CFG_TUSB_DEBUG_PRINTF #else + #include #define tu_printf printf #endif diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 55f309af8..4f2b66e6a 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -252,8 +252,8 @@ typedef enum { } device_capability_type_t; enum { - TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = 1u << 5, - TUSB_DESC_CONFIG_ATT_SELF_POWERED = 1u << 6, + TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = 1 << 5, + TUSB_DESC_CONFIG_ATT_SELF_POWERED = 1 << 6, }; #define TUSB_DESC_CONFIG_POWER_MA(x) ((x)/2) @@ -311,7 +311,7 @@ enum { }; enum { - TUSB_INDEX_INVALID_8 = 0xFFu + TUSB_INDEX_INVALID_8 = 0xFF }; //--------------------------------------------------------------------+ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index db91a73d9..9dc73aa60 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -67,10 +67,8 @@ //--------------------------------------------------------------------+ // TU_VERIFY Helper //--------------------------------------------------------------------+ - #if CFG_TUSB_DEBUG - #include - #define TU_MESS_FAILED() tu_printf("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) + #define TU_MESS_FAILED() TU_LOG1("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) #else #define TU_MESS_FAILED() do {} while (0) #endif -- cgit v1.3.1 From 00f374682ea5aaecf189e46966f015576049a773 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 11:43:19 +0700 Subject: fixing alert by scanning tool --- .../audio_4_channel_mic/src/usb_descriptors.c | 12 ++++-- examples/device/cdc_msc/src/main.c | 2 +- hw/bsp/board_api.h | 3 +- src/class/audio/audio.h | 2 +- src/common/tusb_compiler.h | 48 +++++++++++----------- src/common/tusb_types.h | 4 +- src/osal/osal_freertos.h | 14 +++---- src/tusb_option.h | 6 +-- 8 files changed, 48 insertions(+), 43 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 2f5f67f66..00337eee7 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -126,7 +126,7 @@ enum { }; // array of pointer to string descriptors -char const* string_desc_arr [] = { +static char const* string_desc_arr [] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "PaniRCorp", // 1: Manufacturer "MicNode_4_Ch", // 2: Product @@ -156,18 +156,22 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if ( chr_count > max_count ) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { - _desc_str[1 + i] = str[i]; + _desc_str[1 + i] = (uint16_t) str[i]; } break; } diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index c4606528a..5d70903bc 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -123,7 +123,7 @@ void cdc_task(void) { static uint32_t btn_prev = 0; static cdc_notify_uart_state_t uart_state = { .value = 0 }; const uint32_t btn = board_button_read(); - if (!btn_prev && btn) { + if ((btn_prev == 0) && btn) { uart_state.dsr ^= 1; tud_cdc_notify_uart_state(&uart_state); } diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 80d86a4aa..088c5fec4 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -35,6 +35,7 @@ extern "C" { #include #include #include +#include #include "tusb.h" @@ -164,7 +165,7 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; - uint8_t const nibble = (uid[i] >> (j * 4)) & 0xf; + const uint8_t nibble = (uint8_t) ((uid[i] >> (j * 4)) & 0xf); desc_str1[i * 2 + (1 - j)] = nibble_to_hex[nibble]; // UTF-16-LE } } diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index bcfb67640..cff38cc22 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -905,7 +905,7 @@ typedef enum { AUDIO20_CHANNEL_CONFIG_BOTTOM_CENTER = 0x01000000, AUDIO20_CHANNEL_CONFIG_BACK_LEFT_OF_CENTER = 0x02000000, AUDIO20_CHANNEL_CONFIG_BACK_RIGHT_OF_CENTER = 0x04000000, - AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000, + AUDIO20_CHANNEL_CONFIG_RAW_DATA = 0x80000000u, } audio20_channel_config_t; /// All remaining definitions are taken from the descriptor descriptions in the UAC2 main specification diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 1ce16f060..49421e865 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -76,7 +76,7 @@ /*------------------------------------------------------------------*/ /* Count number of arguments of __VA_ARGS__ - * - reference https://stackoverflow.com/questions/2124339/c-preprocessor-va-args-number-of-arguments + * - reference www.stackoverflow.com/questions/2124339/c-preprocessor-va-args-number-of-arguments * - _GET_NTH_ARG() takes args >= N (64) but only expand to Nth one (64th) * - _RSEQ_N() is reverse sequential to N to add padding to have * Nth position is the same as the number of arguments @@ -106,29 +106,29 @@ 19,18,17,16,15,14,13,12,11,10, \ 9,8,7,6,5,4,3,2,1,0 -// Apply an macro X to each of the arguments with an separated of choice -#define TU_ARGS_APPLY(_X, _s, ...) TU_XSTRCAT(_TU_ARGS_APPLY_, TU_ARGS_NUM(__VA_ARGS__))(_X, _s, __VA_ARGS__) - -#define _TU_ARGS_APPLY_1(_X, _s, _a1) _X(_a1) -#define _TU_ARGS_APPLY_2(_X, _s, _a1, _a2) _X(_a1) _s _X(_a2) -#define _TU_ARGS_APPLY_3(_X, _s, _a1, _a2, _a3) _X(_a1) _s _TU_ARGS_APPLY_2(_X, _s, _a2, _a3) -#define _TU_ARGS_APPLY_4(_X, _s, _a1, _a2, _a3, _a4) _X(_a1) _s _TU_ARGS_APPLY_3(_X, _s, _a2, _a3, _a4) -#define _TU_ARGS_APPLY_5(_X, _s, _a1, _a2, _a3, _a4, _a5) _X(_a1) _s _TU_ARGS_APPLY_4(_X, _s, _a2, _a3, _a4, _a5) -#define _TU_ARGS_APPLY_6(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1) _s _TU_ARGS_APPLY_5(_X, _s, _a2, _a3, _a4, _a5, _a6) -#define _TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s _TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) -#define _TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s _TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) - -// Apply an macro X to each of the arguments and expand the result with comma -#define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(_TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) - -#define _TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) -#define _TU_ARGS_APPLY_EXPAND_2(_X, _a1, _a2) _X(_a1), _X(_a2) -#define _TU_ARGS_APPLY_EXPAND_3(_X, _a1, _a2, _a3) _X(_a1), _TU_ARGS_APPLY_EXPAND_2(_X, _a2, _a3) -#define _TU_ARGS_APPLY_EXPAND_4(_X, _a1, _a2, _a3, _a4) _X(_a1), _TU_ARGS_APPLY_EXPAND_3(_X, _a2, _a3, _a4) -#define _TU_ARGS_APPLY_EXPAND_5(_X, _a1, _a2, _a3, _a4, _a5) _X(_a1), _TU_ARGS_APPLY_EXPAND_4(_X, _a2, _a3, _a4, _a5) -#define _TU_ARGS_APPLY_EXPAND_6(_X, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1), _TU_ARGS_APPLY_EXPAND_5(_X, _a2, _a3, _a4, _a5, _a6) -#define _TU_ARGS_APPLY_EXPAND_7(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1), _TU_ARGS_APPLY_EXPAND_6(_X, _a2, _a3, _a4, _a5, _a6, _a7) -#define _TU_ARGS_APPLY_EXPAND_8(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1), _TU_ARGS_APPLY_EXPAND_7(_X, _a2, _a3, _a4, _a5, _a6, _a7, _a8) +// Apply a macro X to each of the arguments with a selected separation/delimiter +#define TU_ARGS_APPLY(_X, _s, ...) TU_XSTRCAT(TU_ARGS_APPLY_, TU_ARGS_NUM(__VA_ARGS__))(_X, _s, __VA_ARGS__) + +#define TU_ARGS_APPLY_1(_X, _s, _a1) _X(_a1) +#define TU_ARGS_APPLY_2(_X, _s, _a1, _a2) _X(_a1) _s _X(_a2) +#define TU_ARGS_APPLY_3(_X, _s, _a1, _a2, _a3) _X(_a1) _s TU_ARGS_APPLY_2(_X, _s, _a2, _a3) +#define TU_ARGS_APPLY_4(_X, _s, _a1, _a2, _a3, _a4) _X(_a1) _s TU_ARGS_APPLY_3(_X, _s, _a2, _a3, _a4) +#define TU_ARGS_APPLY_5(_X, _s, _a1, _a2, _a3, _a4, _a5) _X(_a1) _s TU_ARGS_APPLY_4(_X, _s, _a2, _a3, _a4, _a5) +#define TU_ARGS_APPLY_6(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1) _s TU_ARGS_APPLY_5(_X, _s, _a2, _a3, _a4, _a5, _a6) +#define TU_ARGS_APPLY_7(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1) _s TU_ARGS_APPLY_6(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7) +#define TU_ARGS_APPLY_8(_X, _s, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1) _s TU_ARGS_APPLY_7(_X, _s, _a2, _a3, _a4, _a5, _a6, _a7, _a8) + +// Apply a macro X to each of the arguments and expand the result with comma +#define TU_ARGS_APPLY_EXPAND(_X, ...) TU_XSTRCAT(TU_ARGS_APPLY_EXPAND_, TU_ARGS_NUM(__VA_ARGS__))(_X, __VA_ARGS__) + +#define TU_ARGS_APPLY_EXPAND_1(_X, _a1) _X(_a1) +#define TU_ARGS_APPLY_EXPAND_2(_X, _a1, _a2) _X(_a1), _X(_a2) +#define TU_ARGS_APPLY_EXPAND_3(_X, _a1, _a2, _a3) _X(_a1), TU_ARGS_APPLY_EXPAND_2(_X, _a2, _a3) +#define TU_ARGS_APPLY_EXPAND_4(_X, _a1, _a2, _a3, _a4) _X(_a1), TU_ARGS_APPLY_EXPAND_3(_X, _a2, _a3, _a4) +#define TU_ARGS_APPLY_EXPAND_5(_X, _a1, _a2, _a3, _a4, _a5) _X(_a1), TU_ARGS_APPLY_EXPAND_4(_X, _a2, _a3, _a4, _a5) +#define TU_ARGS_APPLY_EXPAND_6(_X, _a1, _a2, _a3, _a4, _a5, _a6) _X(_a1), TU_ARGS_APPLY_EXPAND_5(_X, _a2, _a3, _a4, _a5, _a6) +#define TU_ARGS_APPLY_EXPAND_7(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7) _X(_a1), TU_ARGS_APPLY_EXPAND_6(_X, _a2, _a3, _a4, _a5, _a6, _a7) +#define TU_ARGS_APPLY_EXPAND_8(_X, _a1, _a2, _a3, _a4, _a5, _a6, _a7, _a8) _X(_a1), TU_ARGS_APPLY_EXPAND_7(_X, _a2, _a3, _a4, _a5, _a6, _a7, _a8) //--------------------------------------------------------------------+ // Macro for function default arguments diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 4f2b66e6a..9197381cf 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -544,11 +544,11 @@ TU_ATTR_ALWAYS_INLINE static inline tusb_dir_t tu_edpt_dir(uint8_t addr) { // Get Endpoint number from address TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_number(uint8_t addr) { - return (uint8_t)(addr & (~TUSB_DIR_IN_MASK)); + return (uint8_t) (addr & (~TUSB_DIR_IN_MASK)); } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t dir) { - return (uint8_t)(num | (dir ? TUSB_DIR_IN_MASK : 0)); + return (uint8_t) (num | (dir ? TUSB_DIR_IN_MASK : 0)); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_packet_size(tusb_desc_endpoint_t const* desc_ep) { diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index bde5ec010..9aeda4d01 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -70,15 +70,15 @@ typedef struct { } osal_queue_def_t; #if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) - #define _OSAL_Q_NAME(_name) .name = #_name + #define OSAL_Q_NAME(_name) .name = #_name #else - #define _OSAL_Q_NAME(_name) + #define OSAL_Q_NAME(_name) #endif // _int_set is not used with an RTOS #define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ static _type _name##_##buf[_depth];\ - osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, _OSAL_Q_NAME(_name) } + osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, OSAL_Q_NAME(_name) } //--------------------------------------------------------------------+ // TASK API @@ -137,7 +137,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { - if (!TUP_MCU_MULTIPLE_CORE) { + if (TUP_MCU_MULTIPLE_CORE == 0) { (void) ctx; return; // single core MCU does not need to lock in ISR } @@ -149,7 +149,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bo TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { - if (!TUP_MCU_MULTIPLE_CORE) { + if (TUP_MCU_MULTIPLE_CORE == 0) { (void) ctx; return; // single core MCU does not need to lock in ISR } @@ -166,7 +166,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { #if configSUPPORT_STATIC_ALLOCATION - return xSemaphoreCreateBinaryStatic(semdef); + return xSemaphoreCreateBinaryStatic((StaticSemaphore_t*) semdef); #else (void) semdef; return xSemaphoreCreateBinary(); @@ -174,7 +174,7 @@ TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_ } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t semd_hdl) { - vSemaphoreDelete(semd_hdl); + vSemaphoreDelete((SemaphoreHandle_t) semd_hdl); return true; } diff --git a/src/tusb_option.h b/src/tusb_option.h index e00311039..4110dbdee 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -217,9 +217,9 @@ #define OPT_MCU_AT32F413 2506 ///< ArteryTek AT32F413 // Check if configured MCU is one of listed -// Apply _TU_CHECK_MCU with || as separator to list of input -#define _TU_CHECK_MCU(_m) (CFG_TUSB_MCU == _m) -#define TU_CHECK_MCU(...) (TU_ARGS_APPLY(_TU_CHECK_MCU, ||, __VA_ARGS__)) +// Apply TU_MCU_IS_EQUAL with || as separator to list of input +#define TU_MCU_IS_EQUAL(_m) (CFG_TUSB_MCU == (_m)) +#define TU_CHECK_MCU(...) (TU_ARGS_APPLY(TU_MCU_IS_EQUAL, ||, __VA_ARGS__)) //--------------------------------------------------------------------+ // Supported OS -- cgit v1.3.1 From 8979af34c0e5b97520070bcfdffe5280de9ac24c Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 3 Nov 2025 16:36:07 +0700 Subject: Fixed more alert found by PVS-Studio --- .../audio_test_multi_rate/src/usb_descriptors.h | 4 +- examples/device/cdc_msc/src/main.c | 2 +- examples/device/cdc_uac2/src/cdc_app.c | 19 ++-- examples/device/cdc_uac2/src/usb_descriptors.h | 4 +- examples/device/net_lwip_webserver/src/lwipopts.h | 4 +- examples/device/uac2_headset/src/usb_descriptors.h | 4 +- .../device/uac2_speaker_fb/src/usb_descriptors.h | 4 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 8 +- hw/bsp/board.c | 5 +- hw/bsp/board_api.h | 2 +- src/class/cdc/cdc.h | 18 ++-- src/class/video/video_device.c | 6 +- src/common/tusb_common.h | 16 ++- src/common/tusb_compiler.h | 16 +-- src/common/tusb_fifo.c | 42 ++++---- src/common/tusb_private.h | 4 +- src/common/tusb_types.h | 2 +- src/common/tusb_verify.h | 4 +- src/device/dcd.h | 2 +- src/device/usbd.c | 120 ++++++++++----------- src/device/usbd.h | 60 ++++++----- src/device/usbd_pvt.h | 4 +- src/portable/synopsys/dwc2/dcd_dwc2.c | 76 +++++++------ src/portable/synopsys/dwc2/dwc2_stm32.h | 4 +- src/portable/synopsys/dwc2/dwc2_type.h | 2 +- 25 files changed, 224 insertions(+), 208 deletions(-) (limited to 'examples') diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.h b/examples/device/audio_test_multi_rate/src/usb_descriptors.h index c02f40cd9..948a7f4ae 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.h +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.h @@ -23,8 +23,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ // #include "tusb.h" diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 5d70903bc..ff998a13d 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -123,7 +123,7 @@ void cdc_task(void) { static uint32_t btn_prev = 0; static cdc_notify_uart_state_t uart_state = { .value = 0 }; const uint32_t btn = board_button_read(); - if ((btn_prev == 0) && btn) { + if ((btn_prev == 0u) && btn) { uart_state.dsr ^= 1; tud_cdc_notify_uart_state(&uart_state); } diff --git a/examples/device/cdc_uac2/src/cdc_app.c b/examples/device/cdc_uac2/src/cdc_app.c index 2166c1d6b..e3ad8a9ac 100644 --- a/examples/device/cdc_uac2/src/cdc_app.c +++ b/examples/device/cdc_uac2/src/cdc_app.c @@ -29,33 +29,26 @@ #include "common.h" // Invoked when cdc when line state changed e.g connected/disconnected -void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) -{ +void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { (void) itf; (void) rts; - if (dtr) - { + if (dtr) { // Terminal connected - } - else - { + } else { // Terminal disconnected } } // Invoked when CDC interface received data from host -void tud_cdc_rx_cb(uint8_t itf) -{ +void tud_cdc_rx_cb(uint8_t itf) { uint8_t buf[64]; uint32_t count; // connected() check for DTR bit // Most but not all terminal client set this when making connection - if (tud_cdc_connected()) - { - if (tud_cdc_available()) // data is available - { + if (tud_cdc_connected()) { + if (tud_cdc_available()) { count = tud_cdc_n_read(itf, buf, sizeof(buf)); (void) count; diff --git a/examples/device/cdc_uac2/src/usb_descriptors.h b/examples/device/cdc_uac2/src/usb_descriptors.h index 95d8da5c3..139384d3e 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.h +++ b/examples/device/cdc_uac2/src/usb_descriptors.h @@ -24,8 +24,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ // #include "tusb.h" diff --git a/examples/device/net_lwip_webserver/src/lwipopts.h b/examples/device/net_lwip_webserver/src/lwipopts.h index 04949cef9..11686ce2a 100644 --- a/examples/device/net_lwip_webserver/src/lwipopts.h +++ b/examples/device/net_lwip_webserver/src/lwipopts.h @@ -29,8 +29,8 @@ * Author: Simon Goldschmidt * */ -#ifndef __LWIPOPTS_H__ -#define __LWIPOPTS_H__ +#ifndef LWIPOPTS_H__ +#define LWIPOPTS_H__ /* Prevent having to link sys_arch.c (we don't test the API layers in unit tests) */ #define NO_SYS 1 diff --git a/examples/device/uac2_headset/src/usb_descriptors.h b/examples/device/uac2_headset/src/usb_descriptors.h index d673beace..47154626e 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.h +++ b/examples/device/uac2_headset/src/usb_descriptors.h @@ -23,8 +23,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ enum { diff --git a/examples/device/uac2_speaker_fb/src/usb_descriptors.h b/examples/device/uac2_speaker_fb/src/usb_descriptors.h index b0ec60ea1..79f25bbfa 100644 --- a/examples/device/uac2_speaker_fb/src/usb_descriptors.h +++ b/examples/device/uac2_speaker_fb/src/usb_descriptors.h @@ -23,8 +23,8 @@ * */ -#ifndef _USB_DESCRIPTORS_H_ -#define _USB_DESCRIPTORS_H_ +#ifndef USB_DESCRIPTORS_H_ +#define USB_DESCRIPTORS_H_ //--------------------------------------------------------------------+ // UAC2 DESCRIPTOR TEMPLATES diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 279efe7b7..0e0105980 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -46,9 +46,9 @@ static void cdc_app_task(void* param); void cdc_app_init(void) { #if configSUPPORT_STATIC_ALLOCATION - xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); + (void) xTaskCreateStatic(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, cdc_stack, &cdc_taskdef); #else - xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); + (void) xTaskCreate(cdc_app_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES-2, NULL); #endif } @@ -57,7 +57,9 @@ static size_t get_console_inputs(uint8_t *buf, size_t bufsize) { size_t count = 0; while (count < bufsize) { int ch = board_getchar(); - if (ch <= 0) break; + if (ch <= 0) { + break; + } buf[count] = (uint8_t) ch; count++; diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 476ec6733..483d9dc28 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -51,8 +51,7 @@ int sys_read(int fhdl, char *buf, size_t count) TU_ATTR_USED; int sys_write(int fhdl, const char *buf, size_t count) { (void) fhdl; - SEGGER_RTT_Write(0, buf, (int) count); - return (int) count; + return (int) SEGGER_RTT_Write(0, buf, (int) count); } int sys_read(int fhdl, char *buf, size_t count) { @@ -159,7 +158,7 @@ int board_getchar(void) { } void board_putchar(int c) { - sys_write(0, (const char*)&c, 1); + (void) sys_write(0, (const char*)&c, 1); } uint32_t tusb_time_millis_api(void) { diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 088c5fec4..606ac484f 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -165,7 +165,7 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; - const uint8_t nibble = (uint8_t) ((uid[i] >> (j * 4)) & 0xf); + const uint8_t nibble = (uint8_t) ((uid[i] >> (j * 4u)) & 0xfu); desc_str1[i * 2 + (1 - j)] = nibble_to_hex[nibble]; // UTF-16-LE } } diff --git a/src/class/cdc/cdc.h b/src/class/cdc/cdc.h index 6d207c717..679723ba6 100644 --- a/src/class/cdc/cdc.h +++ b/src/class/cdc/cdc.h @@ -192,10 +192,10 @@ typedef enum { CDC_LINE_CODING_STOP_BITS_2 = 2, // 2 bits } cdc_line_coding_stopbits_t; -#define CDC_LINE_CODING_STOP_BITS_TEXT(STOP_BITS) ( \ - STOP_BITS == CDC_LINE_CODING_STOP_BITS_1 ? "1" : \ - STOP_BITS == CDC_LINE_CODING_STOP_BITS_1_5 ? "1.5" : \ - STOP_BITS == CDC_LINE_CODING_STOP_BITS_2 ? "2" : "?" ) +#define CDC_LINE_CODING_STOP_BITS_TEXT(STOP_BITS) ( \ + (STOP_BITS) == CDC_LINE_CODING_STOP_BITS_1 ? "1" : \ + (STOP_BITS) == CDC_LINE_CODING_STOP_BITS_1_5 ? "1.5" : \ + (STOP_BITS) == CDC_LINE_CODING_STOP_BITS_2 ? "2" : "?" ) // TODO Backward compatible for typos. Maybe removed in the future release #define CDC_LINE_CONDING_STOP_BITS_1 CDC_LINE_CODING_STOP_BITS_1 @@ -211,11 +211,11 @@ typedef enum { } cdc_line_coding_parity_t; #define CDC_LINE_CODING_PARITY_CHAR(PARITY) ( \ - PARITY == CDC_LINE_CODING_PARITY_NONE ? 'N' : \ - PARITY == CDC_LINE_CODING_PARITY_ODD ? 'O' : \ - PARITY == CDC_LINE_CODING_PARITY_EVEN ? 'E' : \ - PARITY == CDC_LINE_CODING_PARITY_MARK ? 'M' : \ - PARITY == CDC_LINE_CODING_PARITY_SPACE ? 'S' : '?' ) + (PARITY) == CDC_LINE_CODING_PARITY_NONE ? 'N' : \ + (PARITY) == CDC_LINE_CODING_PARITY_ODD ? 'O' : \ + (PARITY) == CDC_LINE_CODING_PARITY_EVEN ? 'E' : \ + (PARITY) == CDC_LINE_CODING_PARITY_MARK ? 'M' : \ + (PARITY) == CDC_LINE_CODING_PARITY_SPACE ? 'S' : '?' ) //--------------------------------------------------------------------+ // Management Element Notification (Notification Endpoint) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 087292e56..14eba86fb 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -464,7 +464,9 @@ static bool _update_streaming_parameters(videod_streaming_interface_t const *stm uint_fast8_t fmtnum = param->bFormatIndex; TU_ASSERT(vs && fmtnum <= vs->stm.bNumFormats); if (0 == fmtnum) { - if (1 < vs->stm.bNumFormats) return true; /* Need to negotiate all variables. */ + if (1 < vs->stm.bNumFormats) { + return true; /* Need to negotiate all variables. */ + } fmtnum = 1; param->bFormatIndex = 1; } @@ -1259,7 +1261,7 @@ bool tud_video_n_frame_xfer(uint_fast8_t ctl_idx, uint_fast8_t stm_idx, void *bu videod_streaming_interface_t *stm = _get_instance_streaming(ctl_idx, stm_idx); videod_streaming_epbuf_t *stm_epbuf = &_videod_streaming_epbuf[ctl_idx]; - if ( NULL == stm || 0 == stm->desc.ep[0] || stm->buffer) { + if (NULL == stm || 0 == stm->desc.ep[0] || stm->buffer) { return false; } if (stm->state == VS_STATE_PROBING) { diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index ac1c6457f..5f659eb95 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -111,7 +111,7 @@ extern void* tusb_app_phys_to_virt(void *phys_addr); //--------------------------------------------------------------------+ //------------- Mem -------------// -#define tu_memclr(buffer, size) memset((buffer), 0, (size)) +#define tu_memclr(buffer, size) (void) memset((buffer), 0, (size)) #define tu_varclr(_var) tu_memclr(_var, sizeof(*(_var))) // This is a backport of memset_s from c11 @@ -121,6 +121,10 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i return -1; } + if (count == 0u) { + return 0; + } + if (count > destsz) { return -1; } @@ -131,13 +135,15 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i // This is a backport of memcpy_s from c11 TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void *src, size_t count) { - // Validate parameters if (dest == NULL) { return -1; } - // For memcpy, src may be NULL only if count == 0. Reject otherwise. - if (src == NULL && count != 0u) { + if (count == 0u) { + return 0; + } + + if (src == NULL) { return -1; } @@ -230,7 +236,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_round_up(uint32_t v, uint32_t f) // TODO use clz TODO remove TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_log2(uint32_t value) { uint8_t result = 0; - while ((value >>= 1) != 0) { + while (value >>= 1) { result++; } return result; diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 49421e865..167385d13 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -77,19 +77,19 @@ /*------------------------------------------------------------------*/ /* Count number of arguments of __VA_ARGS__ * - reference www.stackoverflow.com/questions/2124339/c-preprocessor-va-args-number-of-arguments - * - _GET_NTH_ARG() takes args >= N (64) but only expand to Nth one (64th) - * - _RSEQ_N() is reverse sequential to N to add padding to have + * - TU_GET_NTH_ARG() takes args >= N (64) but only expand to Nth one (64th) + * - TU_NARG_RSEQ_N() is reverse sequential to N to add padding to have * Nth position is the same as the number of arguments * - ##__VA_ARGS__ is used to deal with 0 paramerter (swallows comma) *------------------------------------------------------------------*/ -#if !defined(__CCRX__) -#define TU_ARGS_NUM(...) _TU_NARG(_0, ##__VA_ARGS__, _RSEQ_N()) +#if defined(__CCRX__) +#define TU_ARGS_NUM(...) TU_NARG_IMPL(_0, __VA_ARGS__, TU_NARG_RSEQ_N()) #else -#define TU_ARGS_NUM(...) _TU_NARG(_0, __VA_ARGS__, _RSEQ_N()) +#define TU_ARGS_NUM(...) TU_NARG_IMPL(_0, ##__VA_ARGS__, TU_NARG_RSEQ_N()) #endif -#define _TU_NARG(...) _GET_NTH_ARG(__VA_ARGS__) -#define _GET_NTH_ARG( \ +#define TU_NARG_IMPL(...) TU_GET_NTH_ARG(__VA_ARGS__) +#define TU_GET_NTH_ARG( \ _1, _2, _3, _4, _5, _6, _7, _8, _9,_10, \ _11,_12,_13,_14,_15,_16,_17,_18,_19,_20, \ _21,_22,_23,_24,_25,_26,_27,_28,_29,_30, \ @@ -97,7 +97,7 @@ _41,_42,_43,_44,_45,_46,_47,_48,_49,_50, \ _51,_52,_53,_54,_55,_56,_57,_58,_59,_60, \ _61,_62,_63,N,...) N -#define _RSEQ_N() \ +#define TU_NARG_RSEQ_N() \ 62,61,60, \ 59,58,57,56,55,54,53,52,51,50, \ 49,48,47,46,45,44,43,42,41,40, \ diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index f7679556f..3b8920c01 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -38,14 +38,16 @@ #if OSAL_MUTEX_REQUIRED -TU_ATTR_ALWAYS_INLINE static inline void _ff_lock(osal_mutex_t mutex) -{ - if (mutex) osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); +TU_ATTR_ALWAYS_INLINE static inline void _ff_lock(osal_mutex_t mutex) { + if (mutex) { + osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); + } } -TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) -{ - if (mutex) osal_mutex_unlock(mutex); +TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) { + if (mutex) { + osal_mutex_unlock(mutex); + } } #else @@ -59,8 +61,7 @@ TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) * \brief Write modes intended to allow special read and write functions to be able to * copy data to and from USB hardware FIFOs as needed for e.g. STM32s and others */ -typedef enum -{ +typedef enum { TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode #ifdef TUP_MEM_CONST_ADDR TU_FIFO_COPY_CST_FULL_WORDS, ///< Copy from/to a constant source/destination address - required for e.g. STM32 to write into USB hardware FIFO @@ -72,7 +73,9 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Limit index space to 2*depth - this allows for a fast "modulo" calculation // but limits the maximum depth to 2^16/2 = 2^15 and buffer overflows are detectable // only if overflow happens once (important for unsupervised DMA applications) - if (depth > 0x8000) return false; + if (depth > 0x8000) { + return false; + } _ff_lock(f->mutex_wr); _ff_lock(f->mutex_rd); @@ -98,22 +101,19 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Intended to be used to read from hardware USB FIFO in e.g. STM32 where all data is read from a constant address // Code adapted from dcd_synopsys.c // TODO generalize with configurable 1 byte or 4 byte each read -static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t len) -{ +static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t len) { volatile const uint32_t * reg_rx = (volatile const uint32_t *) app_buf; // Reading full available 32 bit words from const app address uint16_t full_words = len >> 2; - while(full_words--) - { + while(full_words--) { tu_unaligned_write32(ff_buf, *reg_rx); ff_buf += 4; } // Read the remaining 1-3 bytes from const app address uint8_t const bytes_rem = len & 0x03; - if ( bytes_rem ) - { + if (bytes_rem) { uint32_t tmp32 = *reg_rx; memcpy(ff_buf, &tmp32, bytes_rem); } @@ -121,22 +121,19 @@ static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t // Intended to be used to write to hardware USB FIFO in e.g. STM32 // where all data is written to a constant address in full word copies -static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t len) -{ +static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t len) { volatile uint32_t * reg_tx = (volatile uint32_t *) app_buf; // Write full available 32 bit words to const address uint16_t full_words = len >> 2; - while(full_words--) - { + while(full_words--) { *reg_tx = tu_unaligned_read32(ff_buf); ff_buf += 4; } // Write the remaining 1-3 bytes into const address uint8_t const bytes_rem = len & 0x03; - if ( bytes_rem ) - { + if (bytes_rem) { uint32_t tmp32 = 0; memcpy(&tmp32, ff_buf, bytes_rem); @@ -146,8 +143,7 @@ static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t #endif // send one item to fifo WITHOUT updating write pointer -static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) -{ +static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) { memcpy(f->buffer + (rel * f->item_size), app_buf, f->item_size); } diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 31aca8a31..37d5e89f1 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -141,7 +141,7 @@ uint32_t tu_edpt_stream_read_xfer(uint8_t hwid, tu_edpt_stream_t* s); // Complete read transfer by writing EP -> FIFO. Must be called in the transfer complete callback TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_bytes) { - if (tu_fifo_depth(&s->ff)) { + if (0 != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, s->ep_buf, (uint16_t) xferred_bytes); } } @@ -149,7 +149,7 @@ void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_byt // Complete read transfer with provided buffer TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete_with_buf(tu_edpt_stream_t* s, const void * buf, uint32_t xferred_bytes) { - if (tu_fifo_depth(&s->ff)) { + if (0 != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, buf, (uint16_t) xferred_bytes); } } diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 9197381cf..a3a660d3b 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -548,7 +548,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_number(uint8_t addr) { } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t dir) { - return (uint8_t) (num | (dir ? TUSB_DIR_IN_MASK : 0)); + return (uint8_t) (num | (dir == TUSB_DIR_IN ? TUSB_DIR_IN_MASK : 0u)); } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_packet_size(tusb_desc_endpoint_t const* desc_ep) { diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index d6806d44a..ffd785384 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -78,7 +78,7 @@ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if (0 != ((*ARM_CM_DHCSR) & 1UL)) {__asm("BKPT #0\n");} /* Only halt mcu if debugger is attached */ \ + if (0 != ((*ARM_CM_DHCSR) & 1UL)) { __asm("BKPT #0\n"); } /* Only halt mcu if debugger is attached */ \ } while(0) #elif defined(__riscv) && !TUSB_MCU_VENDOR_ESPRESSIF @@ -98,7 +98,7 @@ *------------------------------------------------------------------*/ #define TU_VERIFY_DEFINE(_cond, _ret) \ do { \ - if ( !(_cond) ) { return _ret; } \ + if (!(_cond)) { return _ret; } \ } while(0) #define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, false) diff --git a/src/device/dcd.h b/src/device/dcd.h index 436c4555f..1b0289280 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -214,7 +214,7 @@ TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport dcd_event_t event; event.rhport = rhport; event.event_id = DCD_EVENT_SETUP_RECEIVED; - memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t)); + (void) memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t)); dcd_event_handler(&event, in_isr); } diff --git a/src/device/usbd.c b/src/device/usbd.c index 05fc752af..9d0bc0f3f 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -354,6 +354,8 @@ TU_ATTR_ALWAYS_INLINE static inline usbd_class_driver_t const * get_driver(uint8 driver = &_app_driver[drvid]; } else if (drvid < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0) { driver = &_usbd_driver[drvid - _app_driver_count]; + } else { + // nothing to do } return driver; } @@ -572,7 +574,7 @@ bool tud_deinit(uint8_t rhport) { // Deinit device controller driver dcd_int_disable(rhport); dcd_disconnect(rhport); - dcd_deinit(rhport); + TU_VERIFY(dcd_deinit(rhport)); // Deinit class drivers for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { @@ -594,7 +596,6 @@ bool tud_deinit(uint8_t rhport) { #endif _usbd_rhport = RHPORT_INVALID; - return true; } @@ -606,8 +607,8 @@ static void configuration_reset(uint8_t rhport) { } tu_varclr(&_usbd_dev); - memset(_usbd_dev.itf2drv, DRVID_INVALID, sizeof(_usbd_dev.itf2drv)); // invalid mapping - memset(_usbd_dev.ep2drv, DRVID_INVALID, sizeof(_usbd_dev.ep2drv)); // invalid mapping + (void) memset(_usbd_dev.itf2drv, DRVID_INVALID, sizeof(_usbd_dev.itf2drv)); // invalid mapping + (void) memset(_usbd_dev.ep2drv, DRVID_INVALID, sizeof(_usbd_dev.ep2drv)); // invalid mapping } static void usbd_reset(uint8_t rhport) { @@ -638,12 +639,16 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { (void) in_isr; // not implemented yet // Skip if stack is not initialized - if (!tud_inited()) return; + if (!tud_inited()) { + return; + } // Loop until there is no more events in the queue while (1) { dcd_event_t event; - if (!osal_queue_receive(_usbd_q, &event, timeout_ms)) return; + if (!osal_queue_receive(_usbd_q, &event, timeout_ms)) { + return; + } #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG_USBD("\r\n"); // extra line for setup @@ -667,7 +672,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { TU_ASSERT(_usbd_queued_setup > 0,); _usbd_queued_setup--; TU_LOG_BUF(CFG_TUD_LOG_LEVEL, &event.setup_received, 8); - if (_usbd_queued_setup) { + if (_usbd_queued_setup != 0) { TU_LOG_USBD(" Skipped since there is other SETUP in queue\r\n"); break; } @@ -703,8 +708,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { _usbd_dev.ep_status[epnum][ep_dir].claimed = 0; if (0 == epnum) { - usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, - event.xfer_complete.len); + usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); } else { usbd_class_driver_t const* driver = get_driver(_usbd_dev.ep2drv[epnum][ep_dir]); TU_ASSERT(driver,); @@ -738,7 +742,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { case USBD_EVENT_FUNC_CALL: TU_LOG_USBD("\r\n"); - if (event.func_call.func) { + if (event.func_call.func != NULL) { event.func_call.func(event.func_call.param); } break; @@ -792,7 +796,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const } #endif - switch ( p_request->bmRequestType_bit.recipient ) { + switch (p_request->bmRequestType_bit.recipient) { //-V2520 //------------- Device Requests e.g in enumeration -------------// case TUSB_REQ_RCPT_DEVICE: if ( TUSB_REQ_TYPE_CLASS == p_request->bmRequestType_bit.type ) { @@ -806,13 +810,13 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const return invoke_class_control(rhport, driver, p_request); } - if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { + if (TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type) { // Non-standard request is not supported TU_BREAKPOINT(); return false; } - switch ( p_request->bRequest ) { + switch (p_request->bRequest) { //-V2520 case TUSB_REQ_SET_ADDRESS: // Depending on mcu, status phase could be sent either before or after changing device address, // or even require stack to not response with status at all @@ -834,18 +838,15 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Only process if new configure is different if (_usbd_dev.cfg_num != cfg_num) { - if ( _usbd_dev.cfg_num ) { + if (_usbd_dev.cfg_num != 0) { // already configured: need to clear all endpoints and driver first TU_LOG_USBD(" Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); - // disable SOF dcd_sof_enable(rhport, false); - - // close all non-control endpoints, cancel all pending transfers if any dcd_edpt_close_all(rhport); // close all drivers and current configured state except bus speed - uint8_t const speed = _usbd_dev.speed; + const uint8_t speed = _usbd_dev.speed; configuration_reset(rhport); _usbd_dev.speed = speed; // restore speed @@ -853,18 +854,15 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const _usbd_dev.cfg_num = cfg_num; - // Handle the new configuration and execute the corresponding callback - if ( cfg_num ) { - // switch to new configuration if not zero + // Handle the new configuration + if (cfg_num == 0) { + tud_umount_cb(); + } else { if (!process_set_config(rhport, cfg_num)) { - TU_MESS_FAILED(); - TU_BREAKPOINT(); _usbd_dev.cfg_num = 0; - return false; + TU_ASSERT(false); } tud_mount_cb(); - } else { - tud_umount_cb(); } } @@ -873,17 +871,17 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; case TUSB_REQ_GET_DESCRIPTOR: - TU_VERIFY( process_get_descriptor(rhport, p_request) ); + TU_VERIFY(process_get_descriptor(rhport, p_request)); break; case TUSB_REQ_SET_FEATURE: - switch(p_request->wValue) { + switch(p_request->wValue) { //-V2520 case TUSB_REQ_FEATURE_REMOTE_WAKEUP: TU_LOG_USBD(" Enable Remote Wakeup\r\n"); // Host may enable remote wake up before suspending especially HID device _usbd_dev.remote_wakeup_en = true; tud_control_status(rhport, p_request); - break; + break; #if CFG_TUD_TEST_MODE case TUSB_REQ_FEATURE_TEST_MODE: { @@ -897,7 +895,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const tud_control_status(rhport, p_request); break; } - #endif /* CFG_TUD_TEST_MODE */ + #endif // Stall unsupported feature selector default: return false; @@ -907,13 +905,12 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const case TUSB_REQ_CLEAR_FEATURE: // Only support remote wakeup for device feature TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); - TU_LOG_USBD(" Disable Remote Wakeup\r\n"); // Host may disable remote wake up after resuming _usbd_dev.remote_wakeup_en = false; tud_control_status(rhport, p_request); - break; + break; case TUSB_REQ_GET_STATUS: { // Device status bit mask @@ -939,24 +936,24 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // all requests to Interface (STD or Class) is forwarded to class driver. // notable requests are: GET HID REPORT DESCRIPTOR, SET_INTERFACE, GET_INTERFACE - if ( !invoke_class_control(rhport, driver, p_request) ) { + if (!invoke_class_control(rhport, driver, p_request)) { // For GET_INTERFACE and SET_INTERFACE, it is mandatory to respond even if the class // driver doesn't use alternate settings or implement this TU_VERIFY(TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type); - switch(p_request->bRequest) { - case TUSB_REQ_GET_INTERFACE: - case TUSB_REQ_SET_INTERFACE: - // Clear complete callback if driver set since it can also stall the request. - usbd_control_set_complete_callback(NULL); + // Clear complete callback if driver set since it can also stall the request. + usbd_control_set_complete_callback(NULL); - if (TUSB_REQ_GET_INTERFACE == p_request->bRequest) { - uint8_t alternate = 0; - tud_control_xfer(rhport, p_request, &alternate, 1); - }else { - tud_control_status(rhport, p_request); - } - break; + switch (p_request->bRequest) { //-V2520 + case TUSB_REQ_GET_INTERFACE: { + uint8_t alternate = 0; + tud_control_xfer(rhport, p_request, &alternate, 1); + break; + } + + case TUSB_REQ_SET_INTERFACE: + tud_control_status(rhport, p_request); + break; default: return false; } @@ -973,15 +970,15 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const TU_ASSERT(ep_num < TU_ARRAY_SIZE(_usbd_dev.ep2drv) ); usbd_class_driver_t const * driver = get_driver(_usbd_dev.ep2drv[ep_num][ep_dir]); - if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { + if (TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type) { // Forward class request to its driver TU_VERIFY(driver); return invoke_class_control(rhport, driver, p_request); } else { // Handle STD request to endpoint - switch ( p_request->bRequest ) { + switch (p_request->bRequest) { //-V2520 case TUSB_REQ_GET_STATUS: { - uint16_t status = usbd_edpt_stalled(rhport, ep_addr) ? 0x0001 : 0x0000; + uint16_t status = usbd_edpt_stalled(rhport, ep_addr) ? 0x0001u : 0x0000u; tud_control_xfer(rhport, p_request, &status, 2); } break; @@ -996,7 +993,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const } } - if (driver) { + if (driver != NULL) { // Some classes such as USBTMC needs to clear/re-init its buffer when receiving CLEAR_FEATURE request // We will also forward std request targeted endpoint to class drivers as well @@ -1006,7 +1003,9 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const usbd_control_set_complete_callback(NULL); // skip ZLP status if driver already did that - if ( !_usbd_dev.ep_status[0][TUSB_DIR_IN].busy ) tud_control_status(rhport, p_request); + if (!_usbd_dev.ep_status[0][TUSB_DIR_IN].busy) { + tud_control_status(rhport, p_request); + } } } break; @@ -1017,8 +1016,8 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const return false; } } + break; } - break; // Unknown recipient default: @@ -1081,10 +1080,11 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) // Some drivers use 2 or more interfaces but may not have IAD e.g MIDI (always) or // BTH (even CDC) with class in device descriptor (single interface) - if ( assoc_itf_count == 1) - { + if (assoc_itf_count == 1) { #if CFG_TUD_CDC - if ( driver->open == cdcd_open ) assoc_itf_count = 2; + if ( driver->open == cdcd_open ) { + assoc_itf_count = 2; + } #endif #if CFG_TUD_MIDI @@ -1158,8 +1158,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const tusb_desc_type_t const desc_type = (tusb_desc_type_t) tu_u16_high(p_request->wValue); uint8_t const desc_index = tu_u16_low( p_request->wValue ); - switch(desc_type) - { + switch(desc_type) { //-V2520 case TUSB_DESC_DEVICE: { TU_LOG_USBD(" Device\r\n"); @@ -1187,7 +1186,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const // requested by host if USB > 2.0 ( i.e 2.1 or 3.x ) uintptr_t desc_bos = (uintptr_t) tud_descriptor_bos_cb(); - TU_VERIFY(desc_bos); + TU_VERIFY(desc_bos != 0); // Use offsetof to avoid pointer to the odd/misaligned address uint16_t const total_len = tu_le16toh( tu_unaligned_read16((const void*) (desc_bos + offsetof(tusb_desc_bos_t, wTotalLength))) ); @@ -1203,12 +1202,12 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const if ( desc_type == TUSB_DESC_CONFIGURATION ) { TU_LOG_USBD(" Configuration[%u]\r\n", desc_index); desc_config = (uintptr_t) tud_descriptor_configuration_cb(desc_index); - TU_ASSERT(desc_config); + TU_ASSERT(desc_config != 0); }else { // Host only request this after getting Device Qualifier descriptor TU_LOG_USBD(" Other Speed Configuration\r\n"); desc_config = (uintptr_t) tud_descriptor_other_speed_configuration_cb(desc_index); - TU_VERIFY(desc_config); + TU_VERIFY(desc_config != 0); } // Use offsetof to avoid pointer to the odd/misaligned address @@ -1218,8 +1217,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } // break; // unreachable - case TUSB_DESC_STRING: - { + case TUSB_DESC_STRING: { TU_LOG_USBD(" String[%u]\r\n", desc_index); // String Descriptor always uses the desc set from user diff --git a/src/device/usbd.h b/src/device/usbd.h index bfff23399..c446638c3 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -95,7 +95,9 @@ bool tud_suspended(void); // Check if device is ready to transfer TU_ATTR_ALWAYS_INLINE static inline bool tud_ready(void) { - return tud_mounted() && !tud_suspended(); + const bool is_mounted = tud_mounted(); + const bool is_suspended = tud_suspended(); + return is_mounted && !is_suspended; } // Remote wake up host, only if suspended and enabled by host @@ -421,7 +423,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_AUDIO10_DESC_SELECTOR_UNIT_ONE_PIN_LEN, TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_SELECTOR_UNIT, _unitid, 1, _srcid, _stridx /* Feature Unit Descriptor UAC1 (4.3.2.5) - Variable Channels */ -#define TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(_nchannels) (7 + (_nchannels + 1) * 2) +#define TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(_nchannels) (7 + ((_nchannels) + 1) * 2) // Feature Unit descriptor, take list of control bitmaps for master channel + each channel as variable arguments #define TUD_AUDIO10_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ TUD_AUDIO10_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO10_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, 2, TU_ARGS_APPLY_EXPAND(U16_TO_U8S_LE, __VA_ARGS__), _stridx @@ -539,7 +541,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ TUD_AUDIO20_DESC_OUTPUT_TERM_LEN, TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_OUTPUT_TERMINAL, _termid, U16_TO_U8S_LE(_termtype), _assocTerm, _srcid, _clkid, U16_TO_U8S_LE(_ctrl), _stridx /* Feature Unit Descriptor(4.7.2.8) */ -#define TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(_nchannels) (6 + (_nchannels + 1) * 4) +#define TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(_nchannels) (6 + ((_nchannels) + 1) * 4) #define TUD_AUDIO20_DESC_FEATURE_UNIT(_unitid, _srcid, _stridx, ...) \ TUD_AUDIO20_DESC_FEATURE_UNIT_LEN(TU_ARGS_NUM(__VA_ARGS__) - 1), TUSB_DESC_CS_INTERFACE, AUDIO20_CS_AC_INTERFACE_FEATURE_UNIT, _unitid, _srcid, TU_ARGS_APPLY_EXPAND(U32_TO_U8S_LE, __VA_ARGS__), _stridx @@ -728,7 +730,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // Calculate wMaxPacketSize of Endpoints #define TUD_AUDIO_EP_SIZE(_is_highspeed, _maxFrequency, _nBytesPerSample, _nChannels) \ - ((((_maxFrequency + (_is_highspeed ? 7999 : 999)) / (_is_highspeed ? 8000 : 1000)) + 1) * _nBytesPerSample * _nChannels) + (((((_maxFrequency) + ((_is_highspeed) ? 7999 : 999)) / ((_is_highspeed) ? 8000 : 1000)) + 1) * (_nBytesPerSample) * (_nChannels)) //--------------------------------------------------------------------+ @@ -807,44 +809,44 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size // Note: Alternate count must be numeric or macro, string index is increased by one for each Alt interface #define TUD_DFU_DESCRIPTOR(_itfnum, _alt_count, _stridx, _attr, _timeout, _xfer_size) \ - TU_XSTRCAT(_TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \ + TU_XSTRCAT(TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \ /* Function */ \ 9, DFU_DESC_FUNCTIONAL, _attr, U16_TO_U8S_LE(_timeout), U16_TO_U8S_LE(_xfer_size), U16_TO_U8S_LE(0x0101) -#define _TUD_DFU_ALT(_itfnum, _alt, _stridx) \ +#define TUD_DFU_ALT(_itfnum, _alt, _stridx) \ /* Interface */ \ 9, TUSB_DESC_INTERFACE, _itfnum, _alt, 0, TUD_DFU_APP_CLASS, TUD_DFU_APP_SUBCLASS, DFU_PROTOCOL_DFU, _stridx -#define _TUD_DFU_ALT_1(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx) +#define TUD_DFU_ALT_1(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx) -#define _TUD_DFU_ALT_2(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_1(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_2(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_1(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_3(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_2(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_3(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_2(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_4(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_3(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_4(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_3(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_5(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_4(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_5(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_4(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_6(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_5(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_6(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_5(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_7(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_6(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_7(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_6(_itfnum, _alt_count+1, _stridx+1) -#define _TUD_DFU_ALT_8(_itfnum, _alt_count, _stridx) \ - _TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ - _TUD_DFU_ALT_7(_itfnum, _alt_count+1, _stridx+1) +#define TUD_DFU_ALT_8(_itfnum, _alt_count, _stridx) \ + TUD_DFU_ALT(_itfnum, _alt_count, _stridx), \ + TUD_DFU_ALT_7(_itfnum, _alt_count+1, _stridx+1) //--------------------------------------------------------------------+ // CDC-ECM Descriptor Templates diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index a688cf497..2894d3023 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -117,7 +117,9 @@ bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endp // Check if endpoint is ready (not busy and not stalled) TU_ATTR_ALWAYS_INLINE static inline bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) { - return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr); + const bool is_busy = usbd_edpt_busy(rhport, ep_addr); + const bool is_stalled = usbd_edpt_stalled(rhport, ep_addr); + return !is_busy && !is_stalled; } // Enable SOF interrupt diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 1b43b9ac4..b2531426a 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -85,6 +85,12 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_ep_count(const dwc2_regs_t* dwc #endif } +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +TU_ATTR_ALWAYS_INLINE static inline bool edpt_is_enabled(dwc2_dep_t* dep) { + return (dep->ctl & EPCTL_EPENA) != 0; +} //-------------------------------------------------------------------- // DMA @@ -117,7 +123,7 @@ static void dma_setup_prepare(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); if (dwc2->gsnpsid >= DWC2_CORE_REV_3_00a) { - if(dwc2->epout[0].doepctl & DOEPCTL_EPENA) { + if(edpt_is_enabled(&dwc2->epout[0])) { return; } } @@ -200,7 +206,7 @@ static bool dfifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { } } else { // Check IN endpoints concurrently active limit - if(dwc2_controller->ep_in_count) { + if(0 != dwc2_controller->ep_in_count) { TU_ASSERT(_dcd_data.allocated_epin_count < dwc2_controller->ep_in_count); _dcd_data.allocated_epin_count++; } @@ -217,10 +223,10 @@ static bool dfifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { // Both TXFD and TXSA are in unit of 32-bit words. if (epnum == 0) { - dwc2->dieptxf0 = (fifo_size << DIEPTXF0_TX0FD_Pos) | _dcd_data.dfifo_top; + dwc2->dieptxf0 = ((uint32_t) fifo_size << DIEPTXF0_TX0FD_Pos) | _dcd_data.dfifo_top; } else { // DIEPTXF starts at FIFO #1. - dwc2->dieptxf[epnum - 1] = (fifo_size << DIEPTXF_INEPTXFD_Pos) | _dcd_data.dfifo_top; + dwc2->dieptxf[epnum - 1] = ((uint32_t) fifo_size << DIEPTXF_INEPTXFD_Pos) | _dcd_data.dfifo_top; } } @@ -238,10 +244,10 @@ static void dfifo_device_init(uint8_t rhport) { if (is_dma) { _dcd_data.dfifo_top -= 2 * dwc2_controller->ep_count; } - dwc2->gdfifocfg = (_dcd_data.dfifo_top << GDFIFOCFG_EPINFOBASE_SHIFT) | _dcd_data.dfifo_top; + dwc2->gdfifocfg = ((uint32_t) _dcd_data.dfifo_top << GDFIFOCFG_EPINFOBASE_SHIFT) | _dcd_data.dfifo_top; // Allocate FIFO for EP0 IN - dfifo_alloc(rhport, 0x80, CFG_TUD_ENDPOINT0_SIZE); + (void) dfifo_alloc(rhport, 0x80, CFG_TUD_ENDPOINT0_SIZE); } @@ -282,16 +288,18 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { const uint8_t dir = tu_edpt_dir(ep_addr); dwc2_dep_t* dep = &dwc2->ep[dir == TUSB_DIR_IN ? 0 : 1][epnum]; + const uint32_t stall_mask = (stall ? EPCTL_STALL : 0); + if (dir == TUSB_DIR_IN) { - if (!(dep->diepctl & DIEPCTL_EPENA)) { - dep->diepctl |= DIEPCTL_SNAK | (stall ? DIEPCTL_STALL : 0); + if (!edpt_is_enabled(dep)) { + dep->diepctl |= DIEPCTL_SNAK | stall_mask; } else { // Stop transmitting packets and NAK IN xfers. dep->diepctl |= DIEPCTL_SNAK; while ((dep->diepint & DIEPINT_INEPNE) == 0) {} // Disable the endpoint. - dep->diepctl |= DIEPCTL_EPDIS | (stall ? DIEPCTL_STALL : 0); + dep->diepctl |= DIEPCTL_EPDIS | stall_mask; while ((dep->diepint & DIEPINT_EPDISD_Msk) == 0) {} dep->diepint = DIEPINT_EPDISD; @@ -300,9 +308,10 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { // Flush the FIFO, and wait until we have confirmed it cleared. dfifo_flush_tx(dwc2, epnum); } else { - // Only disable currently enabled non-control endpoint - if ((epnum == 0) || !(dep->doepctl & DOEPCTL_EPENA)) { - dep->doepctl |= stall ? DOEPCTL_STALL : 0; + if (!edpt_is_enabled(dep) || epnum == 0) { + // non-control not-enabled: stall if set + // For EP0 Out, keep it enabled to receive SETUP packets + dep->doepctl |= stall_mask; } else { // Asserting GONAK is required to STALL an OUT endpoint. // Simpler to use polling here, we don't use the "B"OUTNAKEFF interrupt @@ -312,7 +321,7 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { while ((dwc2->gintsts & GINTSTS_BOUTNAKEFF_Msk) == 0) {} // Ditto here disable the endpoint. - dep->doepctl |= DOEPCTL_EPDIS | (stall ? DOEPCTL_STALL : 0); + dep->doepctl |= DOEPCTL_EPDIS | stall_mask; while ((dep->doepint & DOEPINT_EPDISD_Msk) == 0) {} dep->doepint = DOEPINT_EPDISD; @@ -360,7 +369,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin if (depctl.type == DEPCTL_EPTYPE_ISOCHRONOUS && xfer->interval == 1) { const dwc2_dsts_t dsts = {.value = dwc2->dsts}; const uint32_t odd_now = dsts.frame_number & 1u; - if (odd_now) { + if (odd_now != 0) { depctl.set_data0_iso_even = 1; } else { depctl.set_data1_iso_odd = 1; @@ -379,7 +388,7 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin // Enable tx fifo empty interrupt only if there is data. Note must after depctl enable if (dir == TUSB_DIR_IN && total_bytes != 0) { - dwc2->diepempmsk |= (1u << epnum); + dwc2->diepempmsk |= (1u << epnum); //-V629 } } } @@ -551,7 +560,7 @@ void dcd_edpt_close_all(uint8_t rhport) { for (uint8_t n = 1; n < ep_count; n++) { for (uint8_t d = 0; d < 2; d++) { dwc2_dep_t* dep = &dwc2->ep[d][n]; - if (dep->ctl & EPCTL_EPENA) { + if (edpt_is_enabled(dep)) { dep->ctl |= EPCTL_SNAK | EPCTL_EPDIS; } xfer_status[n][1-d].max_size = 0; @@ -643,8 +652,12 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); edpt_disable(rhport, ep_addr, true); - if((tu_edpt_number(ep_addr) == 0) && dma_device_enabled(dwc2)) { - dma_setup_prepare(rhport); + + // For control endpoint, prepare to receive SETUP packet + if (tu_edpt_number(ep_addr) == 0) { + if (dma_device_enabled(dwc2)) { + dma_setup_prepare(rhport); + } } } @@ -681,8 +694,9 @@ static void handle_bus_reset(uint8_t rhport) { // Disable all IN endpoints for (uint8_t n = 0; n < ep_count; n++) { - if (dwc2->epin[n].diepctl & DIEPCTL_EPENA) { - dwc2->epin[n].diepctl |= DIEPCTL_SNAK | DIEPCTL_EPDIS; + dwc2_dep_t* dep = &dwc2->epin[n]; + if (edpt_is_enabled(dep)) { + dep->diepctl |= DIEPCTL_SNAK | DIEPCTL_EPDIS; } } @@ -807,9 +821,9 @@ static void handle_rxflvl_irq(uint8_t rhport) { const uint16_t byte_count = grxstsp.byte_count; xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); - if (byte_count) { + if (byte_count != 0) { // Read packet off RxFIFO - if (xfer->ff) { + if (xfer->ff != NULL) { tu_fifo_write_n_const_addr_full_words(xfer->ff, (const void*) (uintptr_t) rx_fifo, byte_count); } else { dfifo_read_packet(dwc2, xfer->buffer, byte_count); @@ -836,7 +850,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { // the specified OUT endpoint which will be handled by handle_epout_irq() break; - default: break; + default: break; // nothing to do } } @@ -844,7 +858,7 @@ static void handle_epout_slave(uint8_t rhport, uint8_t epnum, dwc2_doepint_t doe if (doepint_bm.setup_phase_done) { // Cleanup previous pending EP0 IN transfer if any dwc2_dep_t* epin0 = &DWC2_REG(rhport)->epin[0]; - if (epin0->diepctl & DIEPCTL_EPENA) { + if (edpt_is_enabled(epin0)) { edpt_disable(rhport, 0x80, false); } dcd_event_setup_received(rhport, _dcd_usbbuf.setup_packet, true); @@ -858,7 +872,6 @@ static void handle_epout_slave(uint8_t rhport, uint8_t epnum, dwc2_doepint_t doe // can is set when GRXSTS_PKTSTS_SETUP_RX is popped therefore they can bet set before/together with setup_phase_done if (!doepint_bm.status_phase_rx && !doepint_bm.setup_packet_rx) { xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); - if ((epnum == 0) && _dcd_data.ep0_pending[TUSB_DIR_OUT]) { // EP0 can only handle one packet, Schedule another packet to be received. edpt_schedule_packets(rhport, epnum, TUSB_DIR_OUT); @@ -875,7 +888,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_IN); if (diepint_bm.xfer_complete) { - if ((epnum == 0) && _dcd_data.ep0_pending[TUSB_DIR_IN]) { + if ((epnum == 0) && (0 != _dcd_data.ep0_pending[TUSB_DIR_IN])) { // EP0 can only handle one packet. Schedule another packet to be transmitted. edpt_schedule_packets(rhport, epnum, TUSB_DIR_IN); } else { @@ -886,7 +899,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep // TX FIFO empty bit is read-only. It will only be cleared by hardware when written bytes is more than // - 64 bytes or // - Half/Empty of TX FIFO size (configured by GAHBCFG.TXFELVL) - if (diepint_bm.txfifo_empty && (dwc2->diepempmsk & (1 << epnum))) { + if (diepint_bm.txfifo_empty && tu_bit_test(dwc2->diepempmsk, epnum)) { dwc2_ep_tsize_t tsiz = {.value = epin->tsiz}; const uint16_t remain_packets = tsiz.packet_count; @@ -902,7 +915,7 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep } // Push packet to Tx-FIFO - if (xfer->ff) { + if (xfer->ff != NULL) { volatile uint32_t* tx_fifo = dwc2->fifo[epnum]; tu_fifo_read_n_const_addr_full_words(xfer->ff, (void*)(uintptr_t)tx_fifo, xact_bytes); } else { @@ -927,7 +940,7 @@ static void handle_epout_dma(uint8_t rhport, uint8_t epnum, dwc2_doepint_t doepi if (doepint_bm.setup_phase_done) { // Cleanup previous pending EP0 IN transfer if any dwc2_dep_t* epin0 = &DWC2_REG(rhport)->epin[0]; - if (epin0->diepctl & DIEPCTL_EPENA) { + if (edpt_is_enabled(epin0)) { edpt_disable(rhport, 0x80, false); } dma_setup_prepare(rhport); @@ -993,7 +1006,7 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { // DAINT for a given EP clears when DEPINTx is cleared. // EPINT will be cleared when DAINT bits are cleared. for (uint8_t epnum = 0; epnum < ep_count; epnum++) { - if (dwc2->daint & TU_BIT(daint_offset + epnum)) { + if (tu_bit_test(dwc2->daint,daint_offset + epnum)) { dwc2_dep_t* epout = &ep_base[epnum]; union { uint32_t value; @@ -1002,7 +1015,7 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { } intr; intr.value = epout->intr; - epout->intr = intr.value; // Clear interrupt + epout->intr = intr.value; // Clear interrupt //-V::2584::{otg_int} if (is_dma) { #if CFG_TUD_DWC2_DMA_ENABLE @@ -1037,6 +1050,7 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { Note: when OTG_MULTI_PROC_INTRPT = 1, Device Each endpoint interrupt deachint/deachmsk/diepeachmsk/doepeachmsk are combined to generate dedicated interrupt line for each endpoint. */ +//-V::2584::{gintsts} PVS-Studio suppression void dcd_int_handler(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); const uint32_t gintmask = dwc2->gintmsk; diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 08950ccc0..9da8de41f 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -176,7 +176,9 @@ TU_ATTR_ALWAYS_INLINE static inline void dwc2_int_set(uint8_t rhport, tusb_role_ TU_ATTR_ALWAYS_INLINE static inline void dwc2_remote_wakeup_delay(void) { // try to delay for 1 ms uint32_t count = SystemCoreClock / 1000; - while (count--) __NOP(); + while (count--) { + __NOP(); + } } // MCU specific PHY init, called BEFORE core reset diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 75643529f..adcc579e3 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -1435,7 +1435,7 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define DAINTMSK_OEPM_Msk (0xFFFFUL << DAINTMSK_OEPM_Pos) // 0xFFFF0000 #define DAINTMSK_OEPM DAINTMSK_OEPM_Msk // OUT EP interrupt mask bits -#define DAINT_SHIFT(_dir) ((_dir == TUSB_DIR_IN) ? 0 : 16) +#define DAINT_SHIFT(_dir) (((_dir) == TUSB_DIR_IN) ? 0 : 16) #if 0 /******************** Bit definition for OTG register ********************/ -- cgit v1.3.1 From 1f04fe7924e8777c1583323171c0e1cabcb29062 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Nov 2025 15:31:02 +0700 Subject: added .clang-format fix more alerts disable IAR CStat since pvs-studio check is better integrated with clion --- .PVS-Studio/.pvsconfig | 13 +- .clang-format | 102 ++++++---- .github/workflows/static_analysis.yml | 3 +- README.rst | 6 +- examples/device/audio_4_channel_mic/src/main.c | 8 +- .../src/usb_descriptors.c | 8 +- examples/device/audio_test/src/main.c | 8 +- examples/device/audio_test/src/usb_descriptors.c | 8 +- .../audio_test_freertos/src/usb_descriptors.c | 8 +- examples/device/audio_test_multi_rate/src/main.c | 8 +- .../audio_test_multi_rate/src/usb_descriptors.c | 8 +- examples/device/cdc_dual_ports/src/main.c | 12 +- examples/device/cdc_msc/src/msc_disk.c | 28 ++- examples/device/cdc_uac2/src/uac2_app.c | 28 +-- examples/device/cdc_uac2/src/usb_descriptors.c | 8 +- examples/device/dfu/src/usb_descriptors.c | 8 +- examples/device/dfu_runtime/src/main.c | 4 +- examples/device/dfu_runtime/src/usb_descriptors.c | 8 +- examples/device/dynamic_configuration/src/main.c | 56 +++--- .../device/dynamic_configuration/src/msc_disk.c | 14 +- .../dynamic_configuration/src/usb_descriptors.c | 8 +- examples/device/hid_boot_interface/src/main.c | 147 +++++++------- .../hid_boot_interface/src/usb_descriptors.c | 124 ++++++------ examples/device/hid_composite/src/main.c | 211 ++++++++++----------- examples/device/mtp/src/mtp_fs_example.c | 90 +++++---- hw/bsp/family_support.cmake | 8 +- src/class/mtp/mtp.h | 14 +- src/class/mtp/mtp_device.h | 10 +- src/class/video/video.h | 10 +- src/common/tusb_common.h | 7 +- src/common/tusb_debug.h | 4 +- src/device/usbd_control.c | 6 +- src/device/usbd_pvt.h | 5 - src/tusb.c | 4 +- 34 files changed, 523 insertions(+), 471 deletions(-) (limited to 'examples') diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 32125c2f7..2e231c939 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,3 +1,10 @@ -//-V::2506 -//-V::2514 -//-V::2614 +//V_EXCLUDE_PATH */iar/cxarm* +//V_EXCLUDE_PATH */pico-sdk/* + +//-V::2506 MISRA. A function should have a single point of exit at the end. +//-V::2514 MISRA. Unions should not be used. +//-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. +//-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. +//+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES +//-V:memcpy:2628 Pointer arguments to the 'memcpy' function should be pointers to qualified or unqualified versions of compatible types. diff --git a/.clang-format b/.clang-format index 0fd168e5a..79a160a8d 100644 --- a/.clang-format +++ b/.clang-format @@ -1,66 +1,88 @@ -# Generated from CLion C/C++ Code Style settings +--- +Language: Cpp BasedOnStyle: LLVM -AccessModifierOffset: -2 -AlignAfterOpenBracket: Align -AlignConsecutiveAssignments: None -AlignOperands: Align +AlignAfterOpenBracket: AlwaysBreak +AlignConsecutiveAssignments: + Enabled: true + AcrossEmptyLines: false + AcrossComments: false +AlignConsecutiveBitFields: + Enabled: true + AcrossEmptyLines: false + AcrossComments: false +AlignConsecutiveDeclarations: + Enabled: true + AcrossEmptyLines: false + AcrossComments: false +AlignConsecutiveMacros: + Enabled: true + AcrossEmptyLines: true + AcrossComments: false +AlignConsecutiveShortCaseStatements: + Enabled: true + AcrossEmptyLines: true + AcrossComments: true + AlignCaseColons: false +AlignEscapedNewlines: LeftWithLastLine +AlignOperands: true +AlignTrailingComments: + Kind: Always + OverEmptyLines: 2 AllowAllArgumentsOnNextLine: false AllowAllConstructorInitializersOnNextLine: false AllowAllParametersOfDeclarationOnNextLine: false -AllowShortBlocksOnASingleLine: Always -AllowShortCaseLabelsOnASingleLine: false -AllowShortFunctionsOnASingleLine: All -AllowShortIfStatementsOnASingleLine: Always -AllowShortLambdasOnASingleLine: All -AllowShortLoopsOnASingleLine: true -AlwaysBreakAfterReturnType: None +AllowShortBlocksOnASingleLine: Empty +AllowShortCaseExpressionOnASingleLine: true +AllowShortCaseLabelsOnASingleLine: true +AllowShortFunctionsOnASingleLine: None +AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes BreakBeforeBraces: Custom BraceWrapping: AfterCaseLabel: false AfterClass: false - AfterControlStatement: Never + AfterControlStatement: false AfterEnum: false AfterFunction: false AfterNamespace: false + AfterStruct: false AfterUnion: false - BeforeCatch: false + AfterExternBlock: false + BeforeCatch: true BeforeElse: false - IndentBraces: false - SplitEmptyFunction: false + BeforeLambdaBody: false + BeforeWhile: false + SplitEmptyFunction: true SplitEmptyRecord: true -BreakBeforeBinaryOperators: None -BreakBeforeTernaryOperators: true -BreakConstructorInitializers: BeforeColon -BreakInheritanceList: BeforeColon -ColumnLimit: 0 -CompactNamespaces: false -ContinuationIndentWidth: 4 + SplitEmptyNamespace: true +BracedInitializerIndentWidth: 2 +BreakConstructorInitializers: AfterColon +BreakConstructorInitializersBeforeComma: false +ColumnLimit: 120 +ConstructorInitializerAllOnOneLineOrOnePerLine: false +Cpp11BracedListStyle: true +IncludeCategories: + - Regex: '^<.*' + Priority: 1 + - Regex: '^".*' + Priority: 2 + - Regex: '.*' + Priority: 3 +IncludeIsMainRegex: '([-_](test|unittest))?$' +InsertBraces: true IndentCaseLabels: true -IndentPPDirectives: BeforeHash -IndentWidth: 2 -KeepEmptyLinesAtTheStartOfBlocks: true +InsertNewlineAtEOF: true +MacroBlockBegin: '' +MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All -ObjCSpaceAfterProperty: false -ObjCSpaceBeforeProtocolList: true -PointerAlignment: Right ReflowComments: false -SpaceAfterCStyleCast: true -SpaceAfterLogicalNot: false SpaceAfterTemplateKeyword: false -SpaceBeforeAssignmentOperators: true -SpaceBeforeCpp11BracedList: false -SpaceBeforeCtorInitializerColon: true -SpaceBeforeInheritanceColon: true -SpaceBeforeParens: ControlStatements SpaceBeforeRangeBasedForLoopColon: false SpaceInEmptyParentheses: false -SpacesBeforeTrailingComments: 0 SpacesInAngles: false +SpacesInConditionalStatement: false SpacesInCStyleCastParentheses: false -SpacesInContainerLiterals: true SpacesInParentheses: false -SpacesInSquareBrackets: false TabWidth: 2 -UseTab: Never +... diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 7e74f77ce..227f5e103 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -183,7 +183,8 @@ jobs: --define sonar.cfamily.compile-commands=${{ env.BUILD_WRAPPER_OUT_DIR }}/compile_commands.json IAR-CStat: - if: github.repository_owner == 'hathach' + #if: github.repository_owner == 'hathach' + if: false runs-on: ubuntu-latest strategy: fail-fast: false diff --git a/README.rst b/README.rst index 38ebcc8da..fcec5d613 100644 --- a/README.rst +++ b/README.rst @@ -1,4 +1,4 @@ -|Build Status| |CircleCI Status| |Documentation Status| |Fuzzing Status| |License| +|Build Status| |CircleCI Status| |Documentation Status| |Static Analysis| |Fuzzing Status| |License| Sponsors ======== @@ -252,11 +252,13 @@ The following tools are provided freely to support the development of the TinyUS .. |Build Status| image:: https://github.com/hathach/tinyusb/actions/workflows/build.yml/badge.svg - :target: https://github.com/hathach/tinyusb/actions + :target: https://github.com/hathach/tinyusb/actions/workflows/build.yml .. |CircleCI Status| image:: https://dl.circleci.com/status-badge/img/circleci/4AYHvUhFxdnY4rA7LEsdqW/QmrpoL2AjGqetvFQNqtWyq/tree/master.svg?style=svg :target: https://dl.circleci.com/status-badge/redirect/circleci/4AYHvUhFxdnY4rA7LEsdqW/QmrpoL2AjGqetvFQNqtWyq/tree/master .. |Documentation Status| image:: https://readthedocs.org/projects/tinyusb/badge/?version=latest :target: https://docs.tinyusb.org/en/latest/?badge=latest +.. |Static Analysis| image:: https://github.com/hathach/tinyusb/actions/workflows/static_analysis.yml/badge.svg + :target: https://github.com/hathach/tinyusb/actions/workflows/static_analysis.yml .. |Fuzzing Status| image:: https://oss-fuzz-build-logs.storage.googleapis.com/badges/tinyusb.svg :target: https://oss-fuzz-build-logs.storage.googleapis.com/index.html#tinyusb .. |License| image:: https://img.shields.io/badge/license-MIT-brightgreen.svg diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index de9e8a06a..5767c7453 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -156,7 +156,9 @@ void tud_resume_cb(void) { void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE / 1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX); } @@ -406,7 +408,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return;// not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c index 2f5f67f66..3bb93f67d 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic_freertos/src/usb_descriptors.c @@ -156,14 +156,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if ( chr_count > max_count ) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index 875d0b7f0..2441eefbc 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -139,7 +139,9 @@ void tud_resume_cb(void) { void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; for (size_t cnt = 0; cnt < sizeof(test_buffer_audio) / 2; cnt++) { test_buffer_audio[cnt] = startVal++; @@ -400,7 +402,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return;// not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index b6c19deba..ad161939e 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -158,14 +158,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/audio_test_freertos/src/usb_descriptors.c b/examples/device/audio_test_freertos/src/usb_descriptors.c index b6c19deba..ad161939e 100644 --- a/examples/device/audio_test_freertos/src/usb_descriptors.c +++ b/examples/device/audio_test_freertos/src/usb_descriptors.c @@ -158,14 +158,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 55a649613..baeec870f 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -147,7 +147,9 @@ void tud_resume_cb(void) { void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; // 16bit if (bytesPerSample == 2) { @@ -612,7 +614,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return;// not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/audio_test_multi_rate/src/usb_descriptors.c b/examples/device/audio_test_multi_rate/src/usb_descriptors.c index 1912a81e2..471eb4f2e 100644 --- a/examples/device/audio_test_multi_rate/src/usb_descriptors.c +++ b/examples/device/audio_test_multi_rate/src/usb_descriptors.c @@ -213,14 +213,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 8fe003f21..5ccb06a8a 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -75,10 +75,14 @@ static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count) { for (uint32_t i = 0; i < count; i++) { if (itf == 0) { // echo back 1st port as lower case - if (isupper(buf[i])) buf[i] += case_diff; + if (isupper(buf[i])) { + buf[i] += case_diff; + } } else { // echo back 2nd port as upper case - if (islower(buf[i])) buf[i] -= case_diff; + if (islower(buf[i])) { + buf[i] -= case_diff; + } } tud_cdc_n_write_char(itf, buf[i]); @@ -153,7 +157,9 @@ void led_blinking_task(void) { static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 1a95f7f8b..e091c2985 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -128,9 +128,9 @@ uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uin const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - strncpy((char*) inquiry_resp->vendor_id, vid, 8); - strncpy((char*) inquiry_resp->product_id, pid, 16); - strncpy((char*) inquiry_resp->product_rev, rev, 4); + (void) strncpy((char*) inquiry_resp->vendor_id, vid, 8); + (void) strncpy((char*) inquiry_resp->product_id, pid, 16); + (void) strncpy((char*) inquiry_resp->product_rev, rev, 4); return sizeof(scsi_inquiry_resp_t); // 36 bytes } @@ -143,8 +143,7 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) { // RAM disk is ready until ejected if (ejected) { // Additional Sense 3A-00 is NOT_FOUND - tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00); - return false; + return tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3a, 0x00); } return true; @@ -154,7 +153,6 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) { // Application update block count and block size void tud_msc_capacity_cb(uint8_t lun, uint32_t *block_count, uint16_t *block_size) { (void) lun; - *block_count = DISK_BLOCK_NUM; *block_size = DISK_BLOCK_SIZE; } @@ -194,7 +192,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buff } uint8_t const *addr = msc_disk[lba] + offset; - memcpy(buffer, addr, bufsize); + (void) memcpy(buffer, addr, bufsize); return (int32_t) bufsize; } @@ -221,7 +219,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t * #ifndef CFG_EXAMPLE_MSC_READONLY uint8_t *addr = msc_disk[lba] + offset; - memcpy(addr, buffer, bufsize); + (void) memcpy(addr, buffer, bufsize); #else (void) lba; (void) offset; @@ -235,19 +233,17 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t * // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, uint16_t bufsize) { + (void) lun; + (void) scsi_cmd; (void) buffer; (void) bufsize; - switch (scsi_cmd[0]) { - default: - // Set Sense = Invalid Command Operation - tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + // currently no other commands is supported - // negative means error -> tinyusb could stall and/or response with failed status - return -1; - } + // Set Sense = Invalid Command Operation + (void) tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); - return -1; + return -1; // stall/failed command request; } #endif diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index cb7b716e8..73a262d0c 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -67,7 +67,9 @@ uint8_t current_resolution; void audio_task(void) { static uint32_t start_ms = 0; uint32_t curr_ms = board_millis(); - if (start_ms == curr_ms) return;// not enough time + if (start_ms == curr_ms) { + return; // not enough time + } start_ms = curr_ms; // When new data arrived, copy data from speaker buffer, to microphone buffer // and send it over @@ -226,16 +228,15 @@ static bool tud_audio_feature_unit_set_request(uint8_t rhport, audio20_control_r //--------------------------------------------------------------------+ // Invoked when audio class specific get request received for an entity -bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) -{ +bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; - if (request->bEntityID == UAC2_ENTITY_CLOCK) + if (request->bEntityID == UAC2_ENTITY_CLOCK) { return tud_audio_clock_get_request(rhport, request); - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + } + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) { return tud_audio_feature_unit_get_request(rhport, request); - else - { + } else { TU_LOG1("Get request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); } @@ -243,14 +244,15 @@ bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p } // Invoked when audio class specific set request received for an entity -bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) -{ +bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *buf) { audio20_control_request_t const *request = (audio20_control_request_t const *)p_request; - if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) + if (request->bEntityID == UAC2_ENTITY_SPK_FEATURE_UNIT) { return tud_audio_feature_unit_set_request(rhport, request, buf); - if (request->bEntityID == UAC2_ENTITY_CLOCK) + } + if (request->bEntityID == UAC2_ENTITY_CLOCK) { return tud_audio_clock_set_request(rhport, request, buf); + } TU_LOG1("Set request not handled, entity = %d, selector = %d, request = %d\r\n", request->bEntityID, request->bControlSelector, request->bRequest); @@ -301,7 +303,9 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if (board_millis() - start_ms < blink_interval_ms) return; + if (board_millis() - start_ms < blink_interval_ms) { + return; + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/cdc_uac2/src/usb_descriptors.c b/examples/device/cdc_uac2/src/usb_descriptors.c index 252b602ac..e6caaa971 100644 --- a/examples/device/cdc_uac2/src/usb_descriptors.c +++ b/examples/device/cdc_uac2/src/usb_descriptors.c @@ -248,14 +248,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index 14ec315ea..48c9985f3 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -158,14 +158,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 37cb80093..5de651bcd 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -132,7 +132,9 @@ void led_blinking_task(void) static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index 1d46ee252..5d5cf52cd 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -153,14 +153,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 258cfcd02..dac74bb7a 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -109,23 +109,18 @@ void tud_resume_cb(void) //--------------------------------------------------------------------+ // USB CDC //--------------------------------------------------------------------+ -void cdc_task(void) -{ - if ( tud_cdc_connected() ) - { - // connected and there are data available - if ( tud_cdc_available() ) - { +void cdc_task(void) { + if (tud_cdc_connected()) { + // connected and there are data available read and echo back + if (tud_cdc_available()) { uint8_t buf[64]; - - // read and echo back uint32_t count = tud_cdc_read(buf, sizeof(buf)); - for(uint32_t i=0; i= sizeof(note_sequence)) note_pos = 0; + if (note_pos >= sizeof(note_sequence)) { + note_pos = 0; + } } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return;// not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); - led_state = 1 - led_state; // toggle + led_state = 1 - led_state;// toggle } diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index ab71b02d6..e95b2e197 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -177,12 +177,13 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo // Callback invoked when received READ10 command. // Copy disk's data to buffer (up to bufsize) and return number of copied bytes. -int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) -{ +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + if ( lba >= DISK_BLOCK_NUM ) { + return -1; + } uint8_t const* addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); @@ -192,12 +193,13 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff // Callback invoked when received WRITE10 command. // Process data in buffer to disk's storage and return number of written bytes -int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) -{ +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) return -1; + if ( lba >= DISK_BLOCK_NUM ) { + return -1; + } #ifndef CFG_EXAMPLE_MSC_READONLY uint8_t* addr = msc_disk[lba] + offset; diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 083279938..458b7c2a5 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -232,14 +232,18 @@ uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 for ( size_t i = 0; i < chr_count; i++ ) { diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 45712cede..44a91db67 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -23,8 +23,8 @@ * */ -#include #include +#include #include #include "bsp/board_api.h" @@ -40,10 +40,10 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; @@ -52,21 +52,16 @@ void led_blinking_task(void); void hid_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); @@ -81,29 +76,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; +void tud_suspend_cb(bool remote_wakeup_en) { + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -113,59 +104,54 @@ void tud_resume_cb(void) // Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) // tud_hid_report_complete_cb() is used to send the next report after previous one is complete -void hid_task(void) -{ +void hid_task(void) { // Poll every 10ms - const uint32_t interval_ms = 10; - static uint32_t start_ms = 0; + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) { + return; // not enough time + } start_ms += interval_ms; uint32_t const btn = board_button_read(); - if ( tud_suspended() && btn ) - { + if (tud_suspended() && btn) { // Wake up host if we are in suspend mode // and REMOTE_WAKEUP feature is enabled by host tud_remote_wakeup(); - } - else - { + } else { // keyboard interface - if ( tud_hid_n_ready(ITF_NUM_KEYBOARD) ) - { + if (tud_hid_n_ready(ITF_NUM_KEYBOARD)) { // used to avoid send multiple consecutive zero report for keyboard static bool has_keyboard_key = false; uint8_t const report_id = 0; uint8_t const modifier = 0; - if ( btn ) - { - uint8_t keycode[6] = { 0 }; - keycode[0] = HID_KEY_ARROW_RIGHT; + if (btn) { + uint8_t keycode[6] = {0}; + keycode[0] = HID_KEY_ARROW_RIGHT; tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, keycode); has_keyboard_key = true; - }else - { + } else { // send empty key report if previously has key pressed - if (has_keyboard_key) tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, NULL); + if (has_keyboard_key) { + tud_hid_n_keyboard_report(ITF_NUM_KEYBOARD, report_id, modifier, NULL); + } has_keyboard_key = false; } } // mouse interface - if ( tud_hid_n_ready(ITF_NUM_MOUSE) ) - { - if ( btn ) - { + if (tud_hid_n_ready(ITF_NUM_MOUSE)) { + if (btn) { uint8_t const report_id = 0; uint8_t const button_mask = 0; - int8_t const vertical = 0; - int8_t const horizontal = 0; - int8_t const delta = 5; + int8_t const vertical = 0; + int8_t const horizontal = 0; + int8_t const delta = 5; tud_hid_n_mouse_report(ITF_NUM_MOUSE, report_id, button_mask, delta, delta, vertical, horizontal); } @@ -175,10 +161,9 @@ void hid_task(void) // Invoked when received SET_PROTOCOL request // protocol is either HID_PROTOCOL_BOOT (0) or HID_PROTOCOL_REPORT (1) -void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) -{ - (void) instance; - (void) protocol; +void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) { + (void)instance; + (void)protocol; // nothing to do since we use the same compatible boot report for both Boot and Report mode. // TODO set a indicator for user @@ -187,11 +172,10 @@ void tud_hid_set_protocol_cb(uint8_t instance, uint8_t protocol) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) -{ - (void) instance; - (void) report; - (void) len; +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const *report, uint16_t len) { + (void)instance; + (void)report; + (void)len; // nothing to do } @@ -199,42 +183,40 @@ void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_ // Invoked when received GET_REPORT control request // Application must fill buffer report's content and return its length. // Return zero will cause the stack to STALL request -uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) -{ +uint16_t tud_hid_get_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t *buffer, uint16_t reqlen) { // TODO not Implemented - (void) instance; - (void) report_id; - (void) report_type; - (void) buffer; - (void) reqlen; + (void)instance; + (void)report_id; + (void)report_type; + (void)buffer; + (void)reqlen; return 0; } // Invoked when received SET_REPORT control request or // received data on OUT endpoint ( Report ID = 0, Type = 0 ) -void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) -{ - (void) report_id; +void tud_hid_set_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const *buffer, uint16_t bufsize) { + (void)report_id; // keyboard interface - if (instance == ITF_NUM_KEYBOARD) - { + if (instance == ITF_NUM_KEYBOARD) { // Set keyboard LED e.g Capslock, Numlock etc... - if (report_type == HID_REPORT_TYPE_OUTPUT) - { + if (report_type == HID_REPORT_TYPE_OUTPUT) { // bufsize should be (at least) 1 - if ( bufsize < 1 ) return; + if (bufsize < 1) { + return; + } uint8_t const kbd_leds = buffer[0]; - if (kbd_leds & KEYBOARD_LED_CAPSLOCK) - { + if (kbd_leds & KEYBOARD_LED_CAPSLOCK) { // Capslock On: disable blink, turn led on blink_interval_ms = 0; board_led_write(true); - }else - { + } else { // Caplocks Off: back to normal blink board_led_write(false); blink_interval_ms = BLINK_MOUNTED; @@ -246,16 +228,19 @@ void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_ //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ - static uint32_t start_ms = 0; - static bool led_state = false; +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; // blink is disabled - if (!blink_interval_ms) return; + if (!blink_interval_ms) { + return; + } // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index 9b4becc85..b5c31a94a 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -33,60 +33,49 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ - PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4)) //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -static tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, - .bcdUSB = 0x0200, - .bDeviceClass = 0x00, - .bDeviceSubClass = 0x00, - .bDeviceProtocol = 0x00, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0100, - - .iManufacturer = 0x01, - .iProduct = 0x02, - .iSerialNumber = 0x03, - - .bNumConfigurations = 0x01 -}; +static tusb_desc_device_t const desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, + .bcdUSB = 0x0200, + .bDeviceClass = 0x00, + .bDeviceSubClass = 0x00, + .bDeviceProtocol = 0x00, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0100, + + .iManufacturer = 0x01, + .iProduct = 0x02, + .iSerialNumber = 0x03, + + .bNumConfigurations = 0x01}; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +uint8_t const *tud_descriptor_device_cb(void) { + return (uint8_t const *)&desc_device; } //--------------------------------------------------------------------+ // HID Report Descriptor //--------------------------------------------------------------------+ -uint8_t const desc_hid_keyboard_report[] = -{ - TUD_HID_REPORT_DESC_KEYBOARD() -}; +uint8_t const desc_hid_keyboard_report[] = {TUD_HID_REPORT_DESC_KEYBOARD()}; -uint8_t const desc_hid_mouse_report[] = -{ - TUD_HID_REPORT_DESC_MOUSE() -}; +uint8_t const desc_hid_mouse_report[] = {TUD_HID_REPORT_DESC_MOUSE()}; // Invoked when received GET HID REPORT DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance) -{ +uint8_t const *tud_hid_descriptor_report_cb(uint8_t instance) { return (instance == 0) ? desc_hid_keyboard_report : desc_hid_mouse_report; } @@ -94,36 +83,37 @@ uint8_t const * tud_hid_descriptor_report_cb(uint8_t instance) // Configuration Descriptor //--------------------------------------------------------------------+ -#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + 2*TUD_HID_DESC_LEN) +#define CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + 2 * TUD_HID_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 1 Interrupt, 2 Bulk, 3 Iso, 4 Interrupt, 5 Bulk etc ... - #define EPNUM_KEYBOARD 0x81 - #define EPNUM_MOUSE 0x84 +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 1 Interrupt, 2 Bulk, 3 Iso, 4 Interrupt, 5 Bulk etc ... +#define EPNUM_KEYBOARD 0x81 +#define EPNUM_MOUSE 0x84 #else - #define EPNUM_KEYBOARD 0x81 - #define EPNUM_MOUSE 0x82 +#define EPNUM_KEYBOARD 0x81 +#define EPNUM_MOUSE 0x82 #endif -uint8_t const desc_configuration[] = -{ +uint8_t const desc_configuration[] = { // Config number, interface count, string index, total length, attribute, power in mA TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_KEYBOARD, 0, HID_ITF_PROTOCOL_KEYBOARD, sizeof(desc_hid_keyboard_report), EPNUM_KEYBOARD, CFG_TUD_HID_EP_BUFSIZE, 10), + TUD_HID_DESCRIPTOR( + ITF_NUM_KEYBOARD, 0, HID_ITF_PROTOCOL_KEYBOARD, sizeof(desc_hid_keyboard_report), EPNUM_KEYBOARD, + CFG_TUD_HID_EP_BUFSIZE, 10), // Interface number, string index, protocol, report descriptor len, EP In address, size & polling interval - TUD_HID_DESCRIPTOR(ITF_NUM_MOUSE, 0, HID_ITF_PROTOCOL_MOUSE, sizeof(desc_hid_mouse_report), EPNUM_MOUSE, CFG_TUD_HID_EP_BUFSIZE, 10) -}; + TUD_HID_DESCRIPTOR( + ITF_NUM_MOUSE, 0, HID_ITF_PROTOCOL_MOUSE, sizeof(desc_hid_mouse_report), EPNUM_MOUSE, CFG_TUD_HID_EP_BUFSIZE, + 10)}; // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ - (void) index; // for multiple configurations +uint8_t const *tud_descriptor_configuration_cb(uint8_t index) { + (void)index; // for multiple configurations return desc_configuration; } @@ -140,12 +130,11 @@ enum { }; // array of pointer to string descriptors -static char const *string_desc_arr[] = -{ - (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) - "TinyUSB", // 1: Manufacturer - "TinyUSB Device", // 2: Product - NULL, // 3: Serials will use unique ID if possible +static char const *string_desc_arr[] = { + (const char[]){0x09, 0x04}, // 0: is supported language is English (0x0409) + "TinyUSB", // 1: Manufacturer + "TinyUSB Device", // 2: Product + NULL, // 3: Serials will use unique ID if possible }; static uint16_t _desc_str[32 + 1]; @@ -153,41 +142,44 @@ static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete uint16_t const *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - (void) langid; + (void)langid; size_t chr_count; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; break; - case STRID_SERIAL: - chr_count = board_usb_get_serial(_desc_str + 1, 32); - break; + case STRID_SERIAL: chr_count = board_usb_get_serial(_desc_str + 1, 32); break; default: // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (!(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0]))) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); + size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 89dab0bdc..9693d564d 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -23,8 +23,8 @@ * */ -#include #include +#include #include #include "bsp/board_api.h" @@ -41,10 +41,10 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; @@ -53,24 +53,18 @@ void led_blinking_task(void); void hid_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); - hid_task(); } } @@ -80,29 +74,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; +void tud_suspend_cb(bool remote_wakeup_en) { + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -110,138 +100,128 @@ void tud_resume_cb(void) // USB HID //--------------------------------------------------------------------+ -static void send_hid_report(uint8_t report_id, uint32_t btn) -{ +static void send_hid_report(uint8_t report_id, uint32_t btn) { // skip if hid is not ready yet - if ( !tud_hid_ready() ) return; + if (!tud_hid_ready()) { + return; + } - switch(report_id) - { - case REPORT_ID_KEYBOARD: - { + switch (report_id) { + case REPORT_ID_KEYBOARD: { // use to avoid send multiple consecutive zero report for keyboard static bool has_keyboard_key = false; - if ( btn ) - { - uint8_t keycode[6] = { 0 }; - keycode[0] = HID_KEY_A; + if (btn != 0u) { + uint8_t keycode[6] = {0}; + keycode[0] = HID_KEY_A; tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode); has_keyboard_key = true; - }else - { + } else { // send empty key report if previously has key pressed - if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + if (has_keyboard_key) { + tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + } has_keyboard_key = false; } + break; } - break; - case REPORT_ID_MOUSE: - { + case REPORT_ID_MOUSE: { int8_t const delta = 5; // no button, right + down, no scroll, no pan tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0); + break; } - break; - case REPORT_ID_CONSUMER_CONTROL: - { + case REPORT_ID_CONSUMER_CONTROL: { // use to avoid send multiple consecutive zero report static bool has_consumer_key = false; - if ( btn ) - { + if (btn != 0u) { // volume down uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT; tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2); has_consumer_key = true; - }else - { + } else { // send empty key report (release key) if previously has key pressed uint16_t empty_key = 0; - if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + if (has_consumer_key) { + tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + } has_consumer_key = false; } + break; } - break; - case REPORT_ID_GAMEPAD: - { + case REPORT_ID_GAMEPAD: { // use to avoid send multiple consecutive zero report for keyboard static bool has_gamepad_key = false; - hid_gamepad_report_t report = - { - .x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, - .hat = 0, .buttons = 0 - }; + hid_gamepad_report_t report = {.x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, .hat = 0, .buttons = 0}; - if ( btn ) - { - report.hat = GAMEPAD_HAT_UP; + if (btn != 0u) { + report.hat = GAMEPAD_HAT_UP; report.buttons = GAMEPAD_BUTTON_A; tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); has_gamepad_key = true; - }else - { - report.hat = GAMEPAD_HAT_CENTERED; + } else { + report.hat = GAMEPAD_HAT_CENTERED; report.buttons = 0; - if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + if (has_gamepad_key) { + tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + } has_gamepad_key = false; } + break; } - break; case REPORT_ID_STYLUS_PEN: { - static bool touch_state = false; - hid_stylus_report_t report = { - .attr = 0, - .x = 0, - .y = 0 - }; - - if (btn) { + static bool touch_state = false; + hid_stylus_report_t report = {.attr = 0, .x = 0, .y = 0}; + + if (btn != 0u) { report.attr = STYLUS_ATTR_TIP_SWITCH | STYLUS_ATTR_IN_RANGE; - report.x = 100; - report.y = 100; + report.x = 100; + report.y = 100; tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); touch_state = true; } else { report.attr = 0; - if (touch_state) tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + if (touch_state) { + tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + } touch_state = false; } + break; } - break; - default: break; + + default: break; // unknown report id } } // Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) // tud_hid_report_complete_cb() is used to send the next report after previous one is complete -void hid_task(void) -{ +void hid_task(void) { // Poll every 10ms - const uint32_t interval_ms = 10; - static uint32_t start_ms = 0; + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) { + return; // not enough time + } start_ms += interval_ms; uint32_t const btn = board_button_read(); // Remote wakeup - if ( tud_suspended() && btn ) - { + if (tud_suspended() && btn != 0u) { // Wake up host if we are in suspend mode // and REMOTE_WAKEUP feature is enabled by host tud_remote_wakeup(); - }else - { + } else { // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb() send_hid_report(REPORT_ID_KEYBOARD, btn); } @@ -250,15 +230,13 @@ void hid_task(void) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) -{ - (void) instance; - (void) len; +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const *report, uint16_t len) { + (void)instance; + (void)len; uint8_t next_report_id = report[0] + 1u; - if (next_report_id < REPORT_ID_COUNT) - { + if (next_report_id < REPORT_ID_COUNT) { send_hid_report(next_report_id, board_button_read()); } } @@ -266,41 +244,39 @@ void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_ // Invoked when received GET_REPORT control request // Application must fill buffer report's content and return its length. // Return zero will cause the stack to STALL request -uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) -{ +uint16_t tud_hid_get_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t *buffer, uint16_t reqlen) { // TODO not Implemented - (void) instance; - (void) report_id; - (void) report_type; - (void) buffer; - (void) reqlen; + (void)instance; + (void)report_id; + (void)report_type; + (void)buffer; + (void)reqlen; return 0; } // Invoked when received SET_REPORT control request or // received data on OUT endpoint ( Report ID = 0, Type = 0 ) -void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) -{ - (void) instance; +void tud_hid_set_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const *buffer, uint16_t bufsize) { + (void)instance; - if (report_type == HID_REPORT_TYPE_OUTPUT) - { + if (report_type == HID_REPORT_TYPE_OUTPUT) { // Set keyboard LED e.g Capslock, Numlock etc... - if (report_id == REPORT_ID_KEYBOARD) - { + if (report_id == REPORT_ID_KEYBOARD) { // bufsize should be (at least) 1 - if ( bufsize < 1 ) return; + if (bufsize < 1) { + return; + } uint8_t const kbd_leds = buffer[0]; - if (kbd_leds & KEYBOARD_LED_CAPSLOCK) - { + if ((kbd_leds & KEYBOARD_LED_CAPSLOCK) != 0u) { // Capslock On: disable blink, turn led on blink_interval_ms = 0; board_led_write(true); - }else - { + } else { // Caplocks Off: back to normal blink board_led_write(false); blink_interval_ms = BLINK_MOUNTED; @@ -312,16 +288,19 @@ void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_ //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ - static uint32_t start_ms = 0; - static bool led_state = false; +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; // blink is disabled - if (!blink_interval_ms) return; + if (0u == blink_interval_ms) { + return; + } // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/mtp/src/mtp_fs_example.c b/examples/device/mtp/src/mtp_fs_example.c index b4772f146..1c287be4d 100644 --- a/examples/device/mtp/src/mtp_fs_example.c +++ b/examples/device/mtp/src/mtp_fs_example.c @@ -39,12 +39,15 @@ #define DEV_PROP_FRIENDLY_NAME "TinyUSB MTP" //------------- storage info -------------// -#define STORAGE_DESCRIPTRION { 'd', 'i', 's', 'k', 0 } +#define STORAGE_DESCRIPTION { 'd', 'i', 's', 'k', 0 } #define VOLUME_IDENTIFIER { 'v', 'o', 'l', 0 } -typedef MTP_STORAGE_INFO_STRUCT(TU_ARRAY_SIZE((uint16_t[]) STORAGE_DESCRIPTRION), - TU_ARRAY_SIZE(((uint16_t[])VOLUME_IDENTIFIER)) -) storage_info_t; +enum { + STORAGE_DESC_LEN = TU_ARRAY_SIZE((uint16_t[]) STORAGE_DESCRIPTION), + VOLUME_ID_LEN = TU_ARRAY_SIZE((uint16_t[])VOLUME_IDENTIFIER) +}; + +typedef MTP_STORAGE_INFO_STRUCT(STORAGE_DESC_LEN, VOLUME_ID_LEN) storage_info_t; storage_info_t storage_info = { #ifdef CFG_EXAMPLE_MTP_READONLY @@ -60,7 +63,7 @@ storage_info_t storage_info = { .free_space_in_objects = 0, // calculated at runtime .storage_description = { .count = (TU_FIELD_SIZE(storage_info_t, storage_description)-1) / sizeof(uint16_t), - .utf16 = STORAGE_DESCRIPTRION + .utf16 = STORAGE_DESCRIPTION }, .volume_identifier = { .count = (TU_FIELD_SIZE(storage_info_t, volume_identifier)-1) / sizeof(uint16_t), @@ -320,9 +323,9 @@ int32_t tud_mtp_data_complete_cb(tud_mtp_cb_data_t* cb_data) { break; } // parameter is: storage id, parent handle, new handle - mtp_container_add_uint32(resp, SUPPORTED_STORAGE_ID); - mtp_container_add_uint32(resp, f->parent); - mtp_container_add_uint32(resp, send_obj_handle); + (void) mtp_container_add_uint32(resp, SUPPORTED_STORAGE_ID); + (void) mtp_container_add_uint32(resp, f->parent); + (void) mtp_container_add_uint32(resp, send_obj_handle); resp->header->code = MTP_RESP_OK; break; } @@ -346,19 +349,22 @@ int32_t tud_mtp_response_complete_cb(tud_mtp_cb_data_t* cb_data) { //--------------------------------------------------------------------+ static int32_t fs_get_device_info(tud_mtp_cb_data_t* cb_data) { // Device info is already prepared up to playback formats. Application only need to add string fields + int32_t resp_code = 0; mtp_container_info_t* io_container = &cb_data->io_container; - mtp_container_add_cstring(io_container, DEV_INFO_MANUFACTURER); - mtp_container_add_cstring(io_container, DEV_INFO_MODEL); - mtp_container_add_cstring(io_container, DEV_INFO_VERSION); + (void) mtp_container_add_cstring(io_container, DEV_INFO_MANUFACTURER); + (void) mtp_container_add_cstring(io_container, DEV_INFO_MODEL); + (void) mtp_container_add_cstring(io_container, DEV_INFO_VERSION); enum { MAX_SERIAL_NCHARS = 32 }; uint16_t serial_utf16[MAX_SERIAL_NCHARS+1]; size_t nchars = board_usb_get_serial(serial_utf16, MAX_SERIAL_NCHARS); serial_utf16[tu_min32(nchars, MAX_SERIAL_NCHARS)] = 0; // ensure null termination - mtp_container_add_string(io_container, serial_utf16); + (void) mtp_container_add_string(io_container, serial_utf16); - tud_mtp_data_send(io_container); - return 0; + if (!tud_mtp_data_send(io_container)) { + resp_code = MTP_RESP_DEVICE_BUSY; + } + return resp_code; } static int32_t fs_open_close_session(tud_mtp_cb_data_t* cb_data) { @@ -380,7 +386,7 @@ static int32_t fs_open_close_session(tud_mtp_cb_data_t* cb_data) { static int32_t fs_get_storage_ids(tud_mtp_cb_data_t* cb_data) { mtp_container_info_t* io_container = &cb_data->io_container; uint32_t storage_ids [] = { SUPPORTED_STORAGE_ID }; - mtp_container_add_auint32(io_container, 1, storage_ids); + (void) mtp_container_add_auint32(io_container, 1, storage_ids); tud_mtp_data_send(io_container); return 0; } @@ -394,7 +400,7 @@ static int32_t fs_get_storage_info(tud_mtp_cb_data_t* cb_data) { storage_info.max_capacity_in_bytes = sizeof(README_TXT_CONTENT) + LOGO_LEN + FS_MAX_CAPACITY_BYTES; storage_info.free_space_in_objects = FS_MAX_FILE_COUNT - fs_get_file_count(); storage_info.free_space_in_bytes = storage_info.free_space_in_objects ? FS_MAX_CAPACITY_BYTES : 0; - mtp_container_add_raw(io_container, &storage_info, sizeof(storage_info)); + (void) mtp_container_add_raw(io_container, &storage_info, sizeof(storage_info)); tud_mtp_data_send(io_container); return 0; } @@ -408,14 +414,14 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { // get describing dataset mtp_device_prop_desc_header_t device_prop_header; device_prop_header.device_property_code = dev_prop_code; - switch (dev_prop_code) { + switch (dev_prop_code) { //-V2520 //-V2659 case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: device_prop_header.datatype = MTP_DATA_TYPE_STR; device_prop_header.get_set = MTP_MODE_GET; - mtp_container_add_raw(io_container, &device_prop_header, sizeof(device_prop_header)); - mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // factory - mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // current - mtp_container_add_uint8(io_container, 0); // no form + (void) mtp_container_add_raw(io_container, &device_prop_header, sizeof(device_prop_header)); + (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // factory + (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); // current + (void) mtp_container_add_uint8(io_container, 0); // no form tud_mtp_data_send(io_container); break; @@ -424,9 +430,9 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { } } else { // get value - switch (dev_prop_code) { + switch (dev_prop_code) { //-V2520 //-V2659 case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: - mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); + (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); tud_mtp_data_send(io_container); break; @@ -446,20 +452,20 @@ static int32_t fs_get_object_handles(tud_mtp_cb_data_t* cb_data) { const uint32_t parent_handle = command->params[2]; // folder handle, 0xFFFFFFFF is root (void)obj_format; - if (storage_id != 0xFFFFFFFF && storage_id != SUPPORTED_STORAGE_ID) { + if (storage_id != 0xFFFFFFFFu && storage_id != SUPPORTED_STORAGE_ID) { return MTP_RESP_INVALID_STORAGE_ID; } uint32_t handles[FS_MAX_FILE_COUNT] = { 0 }; - uint32_t count = 0; - for (uint8_t i = 0; i < FS_MAX_FILE_COUNT; i++) { + uint32_t count = 0u; + for (uint8_t i = 0u; i < FS_MAX_FILE_COUNT; i++) { fs_file_t* f = &fs_objects[i]; if (fs_file_exist(f) && - (parent_handle == f->parent || (parent_handle == 0xFFFFFFFF && f->parent == 0))) { - handles[count++] = i + 1; // handle is index + 1 + (parent_handle == f->parent || (parent_handle == 0xFFFFFFFFu && f->parent == 0u))) { + handles[count++] = (uint32_t) i + 1u; // handle is index + 1 } } - mtp_container_add_auint32(io_container, count, handles); + (void) mtp_container_add_auint32(io_container, count, handles); tud_mtp_data_send(io_container); return 0; @@ -490,11 +496,11 @@ static int32_t fs_get_object_info(tud_mtp_cb_data_t* cb_data) { .association_desc = 0, .sequence_number = 0 }; - mtp_container_add_raw(io_container, &obj_info_header, sizeof(obj_info_header)); - mtp_container_add_string(io_container, f->name); - mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); - mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); - mtp_container_add_cstring(io_container, ""); // keywords, not used + (void) mtp_container_add_raw(io_container, &obj_info_header, sizeof(obj_info_header)); + (void) mtp_container_add_string(io_container, f->name); + (void) mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); + (void) mtp_container_add_cstring(io_container, FS_FIXED_DATETIME); + (void) mtp_container_add_cstring(io_container, ""); // keywords, not used tud_mtp_data_send(io_container); return 0; @@ -512,7 +518,7 @@ static int32_t fs_get_object(tud_mtp_cb_data_t* cb_data) { if (cb_data->phase == MTP_PHASE_COMMAND) { // If file contents is larger than CFG_TUD_MTP_EP_BUFSIZE, data may only partially is added here // the rest will be sent in tud_mtp_data_more_cb - mtp_container_add_raw(io_container, f->data, f->size); + (void) mtp_container_add_raw(io_container, f->data, f->size); tud_mtp_data_send(io_container); } else if (cb_data->phase == MTP_PHASE_DATA) { // continue sending remaining data: file contents offset is xferred byte minus header size @@ -522,6 +528,8 @@ static int32_t fs_get_object(tud_mtp_cb_data_t* cb_data) { memcpy(io_container->payload, f->data + offset, xact_len); tud_mtp_data_send(io_container); } + } else { + // nothing to do } return 0; @@ -537,21 +545,21 @@ static int32_t fs_send_object_info(tud_mtp_cb_data_t* cb_data) { if (!is_session_opened) { return MTP_RESP_SESSION_NOT_OPEN; } - if (storage_id != 0xFFFFFFFF && storage_id != SUPPORTED_STORAGE_ID) { + if (storage_id != 0xFFFFFFFFu && storage_id != SUPPORTED_STORAGE_ID) { return MTP_RESP_INVALID_STORAGE_ID; } if (cb_data->phase == MTP_PHASE_COMMAND) { - tud_mtp_data_receive(io_container); + (void) tud_mtp_data_receive(io_container); } else if (cb_data->phase == MTP_PHASE_DATA) { mtp_object_info_header_t* obj_info = (mtp_object_info_header_t*) io_container->payload; if (obj_info->storage_id != 0 && obj_info->storage_id != SUPPORTED_STORAGE_ID) { return MTP_RESP_INVALID_STORAGE_ID; } - if (obj_info->parent_object) { + if (obj_info->parent_object != 0) { // not root fs_file_t* parent = fs_get_file(obj_info->parent_object); - if (parent == NULL || !parent->association_type) { + if (parent == NULL || 0u == parent->association_type) { return MTP_RESP_INVALID_PARENT_OBJECT; } } @@ -575,8 +583,10 @@ static int32_t fs_send_object_info(tud_mtp_cb_data_t* cb_data) { f->size = obj_info->object_compressed_size; f->data = f_buf; uint8_t* buf = io_container->payload + sizeof(mtp_object_info_header_t); - mtp_container_get_string(buf, f->name); + (void) mtp_container_get_string(buf, f->name); // ignore date created/modified/keywords + } else { + // nothing to do } return 0; diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 16c0d48d7..c2e7bf8f2 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -301,10 +301,10 @@ function(family_configure_common TARGET RTOS) COMMAND_EXPAND_LISTS ) # generate C-STAT report -# add_custom_command(TARGET ${TARGET} POST_BUILD -# COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report -# COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/index.html -# ) + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/cstat_report + COMMAND ireport --db=${CMAKE_BINARY_DIR}/cstat.db --full --project ${TARGET} --output ${CMAKE_CURRENT_BINARY_DIR}/cstat_report/index.html + ) endif () endif () diff --git a/src/class/mtp/mtp.h b/src/class/mtp/mtp.h index 40b6dd8b0..236cf98e0 100644 --- a/src/class/mtp/mtp.h +++ b/src/class/mtp/mtp.h @@ -799,18 +799,18 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_array(mtp_contain TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_string(mtp_container_info_t* p_container, uint16_t* utf16) { uint8_t count = 0; - while (utf16[count]) { + while (utf16[count] != 0u) { count++; } - const uint32_t added_len = 1u + 2u * count; + const uint32_t added_len = 1u + (uint32_t) count * 2u; TU_ASSERT(p_container->header->len + added_len < CFG_TUD_MTP_EP_BUFSIZE, 0); uint8_t* buf = p_container->payload + p_container->header->len - sizeof(mtp_container_header_t); *buf++ = count; p_container->header->len++; - memcpy(buf, utf16, 2 * count); - p_container->header->len += 2 * count; + memcpy(buf, utf16, 2u * (uint32_t) count); + p_container->header->len += 2u * count; return added_len; } @@ -824,7 +824,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_cstring(mtp_conta // empty string (null only): single zero byte *buf = 0; p_container->header->len++; - return 1; + return 1u; } else { *buf++ = len; p_container->header->len++; @@ -875,8 +875,8 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_add_auint32(mtp_conta // //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline uint32_t mtp_container_get_string(uint8_t* buf, uint16_t utf16[]) { - uint8_t nchars = *buf++; - memcpy(utf16, buf, 2 * nchars); + size_t nchars = *buf++; + memcpy(utf16, buf, 2u * nchars); return 1u + 2u * nchars; } diff --git a/src/class/mtp/mtp_device.h b/src/class/mtp/mtp_device.h index 397fbbbce..a33f1dc08 100644 --- a/src/class/mtp/mtp_device.h +++ b/src/class/mtp/mtp_device.h @@ -53,12 +53,14 @@ typedef struct { typedef struct { uint8_t idx; uint8_t stage; // control stage - uint32_t session_id; - const tusb_control_request_t* request; // buffer for data stage - uint8_t* buf; uint16_t bufsize; + uint8_t* buf; + + const tusb_control_request_t* request; + + uint32_t session_id; } tud_mtp_request_cb_data_t; // Number of supported operations, events, device properties, capture formats, playback formats @@ -78,7 +80,7 @@ typedef struct { /* string fields will be added using append function */ \ } -typedef MTP_DEVICE_INFO_STRUCT( +typedef MTP_DEVICE_INFO_STRUCT( //-V2586 [MISRA-C-18.7] Flexible array members should not be declared sizeof(CFG_TUD_MTP_DEVICEINFO_EXTENSIONS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_SUPPORTED_OPERATIONS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_SUPPORTED_EVENTS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_SUPPORTED_DEVICE_PROPERTIES), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_CAPTURE_FORMATS), TU_ARGS_NUM(CFG_TUD_MTP_DEVICEINFO_PLAYBACK_FORMATS) diff --git a/src/class/video/video.h b/src/class/video/video.h index f348e187b..5bdf4b840 100644 --- a/src/class/video/video.h +++ b/src/class/video/video.h @@ -219,11 +219,11 @@ typedef enum { uint8_t baInterfaceNr[_nitf]; \ } -typedef tusb_desc_video_control_header_nitf_t() tusb_desc_video_control_header_t; -typedef tusb_desc_video_control_header_nitf_t(1) tusb_desc_video_control_header_1itf_t; -typedef tusb_desc_video_control_header_nitf_t(2) tusb_desc_video_control_header_2itf_t; -typedef tusb_desc_video_control_header_nitf_t(3) tusb_desc_video_control_header_3itf_t; -typedef tusb_desc_video_control_header_nitf_t(4) tusb_desc_video_control_header_4itf_t; +typedef tusb_desc_video_control_header_nitf_t() tusb_desc_video_control_header_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(1) tusb_desc_video_control_header_1itf_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(2) tusb_desc_video_control_header_2itf_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(3) tusb_desc_video_control_header_3itf_t; //-V2586 incorrectly detected as flexible array +typedef tusb_desc_video_control_header_nitf_t(4) tusb_desc_video_control_header_4itf_t; //-V2586 incorrectly detected as flexible array typedef struct TU_ATTR_PACKED { uint8_t bLength; diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 5f659eb95..7aa42a2d7 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -236,7 +236,7 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_round_up(uint32_t v, uint32_t f) // TODO use clz TODO remove TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_log2(uint32_t value) { uint8_t result = 0; - while (value >>= 1) { + while ((value >>= 1u) != 0u) { result++; } return result; @@ -355,7 +355,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_subtype(void const* desc) { } TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_in_bounds(uint8_t const* p_desc, uint8_t const* desc_end) { - return (p_desc < desc_end) && (tu_desc_next(p_desc) <= desc_end); + if (p_desc >= desc_end) { + return false; + } + return tu_desc_next(p_desc) <= desc_end; } // find descriptor that match byte1 (type) diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index df4034098..a7bf3e959 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -119,7 +119,9 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 // not found return the key value in hex static char not_found[11]; - snprintf(not_found, sizeof(not_found), "0x%08lX", (unsigned long) key); + if (snprintf(not_found, sizeof(not_found), "0x%08lX", (unsigned long) key) <= 0) { + not_found[0] = 0; + } return not_found; } diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index c9700fd9d..2c2ff76b7 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -93,7 +93,7 @@ static bool data_stage_xact(uint8_t rhport) { if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN) { ep_addr = EDPT_CTRL_IN; - if (xact_len) { + if (0u != xact_len) { TU_VERIFY(0 == tu_memcpy_s(_ctrl_epbuf.buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len)); } } @@ -159,7 +159,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, // invoke optional dcd hook if available dcd_edpt0_status_complete(rhport, &_ctrl_xfer.request); - if (_ctrl_xfer.complete_cb) { + if (NULL != _ctrl_xfer.complete_cb) { // TODO refactor with usbd_driver_print_control_complete_name _ctrl_xfer.complete_cb(rhport, CONTROL_STAGE_ACK, &_ctrl_xfer.request); } @@ -185,7 +185,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, // invoke complete callback if set // callback can still stall control in status phase e.g out data does not make sense - if (_ctrl_xfer.complete_cb) { + if (NULL != _ctrl_xfer.complete_cb) { #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL usbd_driver_print_control_complete_name(_ctrl_xfer.complete_cb); #endif diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 2894d3023..6e220129a 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -125,14 +125,9 @@ bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) { // Enable SOF interrupt void usbd_sof_enable(uint8_t rhport, sof_consumer_t consumer, bool en); -/*------------------------------------------------------------------*/ -/* Helper - *------------------------------------------------------------------*/ - bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in); void usbd_defer_func(osal_task_func_t func, void *param, bool in_isr); - #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); #endif diff --git a/src/tusb.c b/src/tusb.c index d52c156ab..be67eead2 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -599,7 +599,9 @@ void tu_print_mem(void const* buf, uint32_t count, uint8_t indent) { if (remain) { for (uint32_t i = 0; i < 16 - remain; i++) { tu_printf(" "); - for (int j = 0; j < 2 * size; j++) tu_printf(" "); + for (int j = 0; j < 2 * size; j++) { + tu_printf(" "); + } } } -- cgit v1.3.1 From 0172f40e66b3518e6593f5aa89afb9b0116fa75c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Nov 2025 11:39:10 +0700 Subject: update espressif cmake --- examples/host/cdc_msc_hid_freertos/only.txt | 2 +- examples/host/device_info/only.txt | 4 +-- .../components/tinyusb_src/CMakeLists.txt | 41 ++++------------------ hw/bsp/family_support.cmake | 6 ++-- src/CMakeLists.txt | 13 +++++-- 5 files changed, 22 insertions(+), 44 deletions(-) (limited to 'examples') diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 576271aff..ef0a1ac96 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -1,4 +1,3 @@ -mcu:ESP32P4 mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX @@ -15,5 +14,6 @@ mcu:STM32F7 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 +family:espressif family:samd21 family:samd5x_e5x diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index 133a7c9a0..61a08f68d 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,7 +1,4 @@ mcu:CH32V20X -mcu:ESP32S2 -mcu:ESP32S3 -mcu:ESP32P4 mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X @@ -21,5 +18,6 @@ mcu:STM32F7 mcu:STM32H7 mcu:STM32H7RS mcu:STM32N6 +family:espressif family:samd21 family:samd5x_e5x diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index beabcad9c..c011b926e 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -1,12 +1,12 @@ idf_build_get_property(target IDF_TARGET) +include(CMakePrintHelpers) -set(srcs) -set(includes_public) -set(compile_options) -set(tusb_src "${CMAKE_CURRENT_SOURCE_DIR}/../../../../../src") +set(tusb_src ${CMAKE_CURRENT_LIST_DIR}/../../../../../src) +get_filename_component(tusb_src ${tusb_src} ABSOLUTE) +include(${tusb_src}/CMakeLists.txt) string(TOUPPER OPT_MCU_${target} tusb_mcu) -list(APPEND compile_definitions +set(compile_definitions CFG_TUSB_MCU=${tusb_mcu} CFG_TUSB_OS=OPT_OS_FREERTOS BOARD_TUD_RHPORT=${RHPORT_DEVICE} @@ -14,7 +14,7 @@ list(APPEND compile_definitions BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} ) - +cmake_print_variables(compile_definitions) if (target STREQUAL esp32p4) # P4 change alignment to 64 (DCache line size) for possible DMA configuration list(APPEND compile_definitions @@ -23,36 +23,11 @@ if (target STREQUAL esp32p4) ) endif () +tinyusb_sources_get(srcs) list(APPEND srcs - # common - ${tusb_src}/tusb.c - ${tusb_src}/common/tusb_fifo.c - # device - ${tusb_src}/device/usbd.c - ${tusb_src}/device/usbd_control.c - ${tusb_src}/class/audio/audio_device.c - ${tusb_src}/class/cdc/cdc_device.c - ${tusb_src}/class/dfu/dfu_device.c - ${tusb_src}/class/dfu/dfu_rt_device.c - ${tusb_src}/class/hid/hid_device.c - ${tusb_src}/class/midi/midi_device.c - ${tusb_src}/class/msc/msc_device.c - ${tusb_src}/class/mtp/mtp_device.c - ${tusb_src}/class/net/ecm_rndis_device.c - ${tusb_src}/class/net/ncm_device.c - ${tusb_src}/class/usbtmc/usbtmc_device.c - ${tusb_src}/class/vendor/vendor_device.c - ${tusb_src}/class/video/video_device.c ${tusb_src}/portable/synopsys/dwc2/dcd_dwc2.c ${tusb_src}/portable/synopsys/dwc2/hcd_dwc2.c ${tusb_src}/portable/synopsys/dwc2/dwc2_common.c - # host - ${tusb_src}/host/usbh.c - ${tusb_src}/host/hub.c - ${tusb_src}/class/cdc/cdc_host.c - ${tusb_src}/class/hid/hid_host.c - ${tusb_src}/class/msc/msc_host.c - ${tusb_src}/class/vendor/vendor_host.c ) # use max3421 as host controller @@ -74,7 +49,6 @@ if(DEFINED CFLAGS_CLI) list(APPEND compile_definitions ${CFLAGS_CLI}) endif() - idf_component_register(SRCS ${srcs} INCLUDE_DIRS ${tusb_src} REQUIRES src @@ -82,4 +56,3 @@ idf_component_register(SRCS ${srcs} ) target_compile_definitions(${COMPONENT_LIB} PUBLIC ${compile_definitions}) -target_compile_options(${COMPONENT_LIB} PRIVATE -Wno-error=format) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index c2e7bf8f2..ad68957df 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -12,7 +12,7 @@ set(UF2CONV_PY ${TOP}/tools/uf2/utils/uf2conv.py) #------------------------------------------------------------- # Toolchain -# Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= +# Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= or ENV{CC}= #------------------------------------------------------------- function(detect_compiler COMPILER_PATH RESULT) string(FIND ${COMPILER_PATH} "iccarm" IS_IAR) @@ -319,8 +319,8 @@ endfunction() # Add tinyusb to target function(family_add_tinyusb TARGET OPT_MCU) - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # tinyusb's CMakeLists.txt + include(${TOP}/src/CMakeLists.txt) # Add TinyUSB sources, include and common define tinyusb_target_add(${TARGET}) diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 951683104..48dc75e50 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -1,8 +1,8 @@ cmake_minimum_required(VERSION 3.20) -# Add tinyusb to a existing target, DCD and HCD drivers are not included -function(tinyusb_target_add TARGET) - target_sources(${TARGET} PRIVATE +# Get TinyUSB sources. Note: DCD and HCD drivers are not included +function(tinyusb_sources_get OUTPUT_VAR) + set(${OUTPUT_VAR} # common ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tusb.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/common/tusb_fifo.c @@ -32,7 +32,14 @@ function(tinyusb_target_add TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/class/vendor/vendor_host.c # typec ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/typec/usbc.c + PARENT_SCOPE ) +endfunction() + +# Add tinyusb to a existing target +function(tinyusb_target_add TARGET) + tinyusb_sources_get(TINYUSB_SRC) + target_sources(${TARGET} PRIVATE ${TINYUSB_SRC}) target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} # TODO for net driver, should be removed/changed -- cgit v1.3.1 From cd90d94e7c67aff189becee8815633ac1549a1d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Nov 2025 18:26:04 +0700 Subject: make host info to devcie cdc to work with freertos/noos --- .PVS-Studio/.pvsconfig | 6 +- examples/device/video_capture/src/main.c | 18 ++- examples/device/video_capture_2ch/src/main.c | 6 +- .../dual/host_info_to_device_cdc/CMakeLists.txt | 7 +- examples/dual/host_info_to_device_cdc/only.txt | 1 + .../host_info_to_device_cdc/src/CMakeLists.txt | 4 + examples/dual/host_info_to_device_cdc/src/main.c | 126 +++++++++++++++++++-- .../components/tinyusb_src/CMakeLists.txt | 2 +- 8 files changed, 146 insertions(+), 24 deletions(-) create mode 100644 examples/dual/host_info_to_device_cdc/src/CMakeLists.txt (limited to 'examples') diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 2e231c939..2cc60722a 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,10 +1,14 @@ //V_EXCLUDE_PATH */iar/cxarm* -//V_EXCLUDE_PATH */pico-sdk/* +//V_EXCLUDE_PATH */pico-sdk/ +//V_EXCLUDE_PATH */esp-idf/ +//V_EXCLUDE_PATH */hw/bsp/espressif/components/ +//V_EXCLUDE_PATH */hw/mcu/ //-V::2506 MISRA. A function should have a single point of exit at the end. //-V::2514 MISRA. Unions should not be used. //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. //-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES //-V:memcpy:2628 Pointer arguments to the 'memcpy' function should be pointers to qualified or unqualified versions of compatible types. diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 29656e944..adcfb9f95 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -53,7 +53,7 @@ void usb_device_task(void *param); void video_task(void* param); #if CFG_TUSB_OS == OPT_OS_FREERTOS -void freertos_init_task(void); +void freertos_init(void); #endif @@ -65,7 +65,7 @@ int main(void) { // If using FreeRTOS: create blinky, tinyusb device, video task #if CFG_TUSB_OS == OPT_OS_FREERTOS - freertos_init_task(); + freertos_init(); #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { @@ -211,8 +211,12 @@ static void video_send_frame(void) { } unsigned cur = board_millis(); - if (cur - start_ms < interval_ms) return; // not enough time - if (tx_busy) return; + if (cur - start_ms < interval_ms) { + return; // not enough time + } + if (tx_busy) { + return; + } start_ms += interval_ms; tx_busy = 1; @@ -273,7 +277,9 @@ void led_blinking_task(void* param) { #if CFG_TUSB_OS == OPT_OS_FREERTOS vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); #else - if (board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } #endif start_ms += blink_interval_ms; @@ -336,7 +342,7 @@ void usb_device_task(void *param) { } } -void freertos_init_task(void) { +void freertos_init(void) { #if configSUPPORT_STATIC_ALLOCATION xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index a63efa82d..79b149f2b 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -53,7 +53,7 @@ void usb_device_task(void *param); void video_task(void* param); #if CFG_TUSB_OS == OPT_OS_FREERTOS -void freertos_init_task(void); +void freertos_init(void); #endif @@ -65,7 +65,7 @@ int main(void) { // If using FreeRTOS: create blinky, tinyusb device, video task #if CFG_TUSB_OS == OPT_OS_FREERTOS - freertos_init_task(); + freertos_init(); #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { @@ -343,7 +343,7 @@ void usb_device_task(void *param) { } } -void freertos_init_task(void) { +void freertos_init(void) { #if configSUPPORT_STATIC_ALLOCATION xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); diff --git a/examples/dual/host_info_to_device_cdc/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/CMakeLists.txt index 6ae5b5766..ad3c5ddf0 100644 --- a/examples/dual/host_info_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_info_to_device_cdc/CMakeLists.txt @@ -10,6 +10,11 @@ project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +# Espressif has its own cmake build system +if(FAMILY STREQUAL "espressif") + return() +endif() + add_executable(${PROJECT}) # Example source @@ -25,7 +30,7 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_dual_usb_example(${PROJECT} noos) +family_configure_dual_usb_example(${PROJECT} ${RTOS}) # due to warnings from Pico-PIO-USB if (FAMILY STREQUAL rp2040) diff --git a/examples/dual/host_info_to_device_cdc/only.txt b/examples/dual/host_info_to_device_cdc/only.txt index 35f896f1e..4431065ba 100644 --- a/examples/dual/host_info_to_device_cdc/only.txt +++ b/examples/dual/host_info_to_device_cdc/only.txt @@ -8,3 +8,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:ESP32P4 diff --git a/examples/dual/host_info_to_device_cdc/src/CMakeLists.txt b/examples/dual/host_info_to_device_cdc/src/CMakeLists.txt new file mode 100644 index 000000000..cef2b46ee --- /dev/null +++ b/examples/dual/host_info_to_device_cdc/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "main.c" "usb_descriptors.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 5f3964196..1486bc83e 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -75,8 +75,12 @@ static tusb_desc_device_t descriptor_device[CFG_TUH_DEVICE_MAX+1]; static void print_utf16(uint16_t *temp_buf, size_t buf_len); static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device); -void led_blinking_task(void); -void cdc_task(void); +static void led_blinking_task(void); +static void cdc_task(void); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +static void freertos_init(void); +#endif #define cdc_printf(...) \ do { \ @@ -94,37 +98,86 @@ void cdc_task(void); } \ } while(0) -/*------------- MAIN -------------*/ -int main(void) { - board_init(); - - printf("TinyUSB Host Information -> Device CDC Example\r\n"); +static void usb_device_init(void) { // init device and host stack on configured roothub port tusb_rhport_init_t dev_init = { .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUD_RHPORT, &dev_init); + board_init_after_tusb(); +} +static void usb_host_init(void) { + // init host stack on configured roothub port tusb_rhport_init_t host_init = { .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUH_RHPORT, &host_init); - board_init_after_tusb(); +} + +//--------------------------------------------------------------------+ +// Main +//--------------------------------------------------------------------+ +static void main_task(void* param) { + (void) param; while (1) { - tud_task(); // tinyusb device task - tuh_task(); // tinyusb host task cdc_task(); led_blinking_task(); + + // preempted RTOS run device/host stack in its own task +#if CFG_TUSB_OS == OPT_OS_NONE || CFG_TUSB_OS == OPT_OS_PICO + tud_task(); // tinyusb device task + tuh_task(); // tinyusb host task +#endif } +} + +int main(void) { + board_init(); + +#if CFG_TUSB_OS == OPT_OS_NONE || CFG_TUSB_OS == OPT_OS_PICO + printf("TinyUSB Host Information -> Device CDC Example\r\n"); + + usb_device_init(); + usb_host_init(); + + main_task(NULL); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + freertos_init(); // create RTOS tasks for device, host stack and main_task() +#else + #error RTOS not supported +#endif return 0; } +#if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO +// USB Device Driver task for RTOS +static void usb_device_task(void *param) { + (void) param; + usb_device_init(); + while (1) { + // put this thread to waiting state until there is new events + tud_task(); + } +} + +static void usb_host_task(void *param) { + (void) param; + usb_host_init(); + while (1) { + // put this thread to waiting state until there is new events + tuh_task(); + } +} +#endif + + //--------------------------------------------------------------------+ // Device CDC //--------------------------------------------------------------------+ @@ -156,7 +209,7 @@ void cdc_task(void) { if (!tud_cdc_connected()) { // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop - board_delay(20); + tusb_time_delay_ms_api(20); return; } @@ -259,7 +312,6 @@ void led_blinking_task(void) { //--------------------------------------------------------------------+ // String Descriptor Helper //--------------------------------------------------------------------+ - static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) { // TODO: Check for runover. (void)utf8_len; @@ -310,3 +362,53 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { cdc_printf("%s", (char*) temp_buf); } + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#ifdef ESP_PLATFORM + #define USBD_STACK_SIZE 4096 + #define USBH_STACK_SIZE 4096 + void app_main(void) { + main(); + } +#else + // Increase stack size when debug log is enabled + #define USBD_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 4 : 2)) + #define USBH_STACK_SIZE (configMINIMAL_STACK_SIZE * (CFG_TUSB_DEBUG ? 4 : 2)) +#endif + +#define MAIN_STACK_SIZE (configMINIMAL_STACK_SIZE*4) + +// static task +#if configSUPPORT_STATIC_ALLOCATION +StackType_t main_stack[MAIN_STACK_SIZE]; +StaticTask_t main_taskdef; + +StackType_t usb_device_stack[USBD_STACK_SIZE]; +StaticTask_t usb_device_taskdef; + +StackType_t usb_host_stack[USBH_STACK_SIZE]; +StaticTask_t usb_host_taskdef; +#endif + +void freertos_init(void) { + #if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_device_stack, &usb_device_taskdef); + xTaskCreateStatic(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_host_stack, &usb_host_taskdef); + xTaskCreateStatic(main_task, "main", MAIN_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, main_stack, &main_taskdef); + #else + xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(usb_host_task, "usbh", USBH_STACK_SZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(main_task, "main", MAIN_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); + #endif + + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM + vTaskStartScheduler(); + #endif +} + +#endif diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index c011b926e..2f529dd68 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -14,7 +14,7 @@ set(compile_definitions BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} ) -cmake_print_variables(compile_definitions) + if (target STREQUAL esp32p4) # P4 change alignment to 64 (DCache line size) for possible DMA configuration list(APPEND compile_definitions -- cgit v1.3.1 From 94c1e05a72b197fc0508d43e91deeb3fc63bb4d6 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Nov 2025 19:26:44 +0700 Subject: fix typo detected by copilot --- examples/dual/host_info_to_device_cdc/src/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'examples') diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 1486bc83e..03a1ac3d8 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -401,8 +401,8 @@ void freertos_init(void) { xTaskCreateStatic(main_task, "main", MAIN_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, main_stack, &main_taskdef); #else xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); - xTaskCreate(usb_host_task, "usbh", USBH_STACK_SZE, NULL, configMAX_PRIORITIES - 1, NULL); - xTaskCreate(main_task, "main", MAIN_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); + xTaskCreate(usb_host_task, "usbh", USBH_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); + xTaskCreate(main_task, "main", MAIN_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL); #endif // only start scheduler for non-espressif mcu -- cgit v1.3.1 From 86a4990b96eafb5904f946fa061b310f155a7d51 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Nov 2025 19:56:54 +0700 Subject: fix more alerts --- examples/device/cdc_msc/src/main.c | 35 +++++++++++++++++------------------ src/common/tusb_compiler.h | 2 +- src/common/tusb_private.h | 4 ++-- src/common/tusb_verify.h | 2 +- src/portable/ehci/ehci.c | 2 +- 5 files changed, 22 insertions(+), 23 deletions(-) (limited to 'examples') diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index ff998a13d..e4a205533 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -37,12 +37,12 @@ */ enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -static bool blink_enable = true; +static bool blink_enable = true; void led_blinking_task(void); void cdc_task(void); @@ -52,10 +52,7 @@ int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); @@ -86,7 +83,7 @@ void tud_umount_cb(void) { // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus void tud_suspend_cb(bool remote_wakeup_en) { - (void) remote_wakeup_en; + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } @@ -107,9 +104,9 @@ void cdc_task(void) { // connected and there are data available if (tud_cdc_available()) { // read data - char buf[64]; + char buf[64]; uint32_t count = tud_cdc_read(buf, sizeof(buf)); - (void) count; + (void)count; // Echo back // Note: Skip echo by commenting out write() and write_flush() @@ -120,10 +117,12 @@ void cdc_task(void) { } // Press on-board button to send Uart status notification + static cdc_notify_uart_state_t uart_state = {.value = 0}; + static uint32_t btn_prev = 0; - static cdc_notify_uart_state_t uart_state = { .value = 0 }; - const uint32_t btn = board_button_read(); - if ((btn_prev == 0u) && btn) { + const uint32_t btn = board_button_read(); + + if ((btn_prev == 0u) && (btn != 0u)) { uart_state.dsr ^= 1; tud_cdc_notify_uart_state(&uart_state); } @@ -133,8 +132,8 @@ void cdc_task(void) { // Invoked when cdc when line state changed e.g connected/disconnected void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { - (void) itf; - (void) rts; + (void)itf; + (void)rts; if (dtr) { // Terminal connected @@ -148,15 +147,15 @@ void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { // Invoked when CDC interface received data from host void tud_cdc_rx_cb(uint8_t itf) { - (void) itf; + (void)itf; } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ void led_blinking_task(void) { - static uint32_t start_ms = 0; - static bool led_state = false; + static uint32_t start_ms = 0; + static bool led_state = false; if (blink_enable) { // Blink every interval ms diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 167385d13..7719790d1 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -106,7 +106,7 @@ 19,18,17,16,15,14,13,12,11,10, \ 9,8,7,6,5,4,3,2,1,0 -// Apply a macro X to each of the arguments with a selected separation/delimiter +// Apply a macro X to each of the arguments with a separation/delimiter #define TU_ARGS_APPLY(_X, _s, ...) TU_XSTRCAT(TU_ARGS_APPLY_, TU_ARGS_NUM(__VA_ARGS__))(_X, _s, __VA_ARGS__) #define TU_ARGS_APPLY_1(_X, _s, _a1) _X(_a1) diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 37d5e89f1..5e1d59233 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -141,7 +141,7 @@ uint32_t tu_edpt_stream_read_xfer(uint8_t hwid, tu_edpt_stream_t* s); // Complete read transfer by writing EP -> FIFO. Must be called in the transfer complete callback TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_bytes) { - if (0 != tu_fifo_depth(&s->ff)) { + if (0u != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, s->ep_buf, (uint16_t) xferred_bytes); } } @@ -149,7 +149,7 @@ void tu_edpt_stream_read_xfer_complete(tu_edpt_stream_t* s, uint32_t xferred_byt // Complete read transfer with provided buffer TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_read_xfer_complete_with_buf(tu_edpt_stream_t* s, const void * buf, uint32_t xferred_bytes) { - if (0 != tu_fifo_depth(&s->ff)) { + if (0u != tu_fifo_depth(&s->ff)) { tu_fifo_write_n(&s->ff, buf, (uint16_t) xferred_bytes); } } diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index ffd785384..587554e7f 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -78,7 +78,7 @@ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if (0 != ((*ARM_CM_DHCSR) & 1UL)) { __asm("BKPT #0\n"); } /* Only halt mcu if debugger is attached */ \ + if (0u != ((*ARM_CM_DHCSR) & 1UL)) { __asm("BKPT #0\n"); } /* Only halt mcu if debugger is attached */ \ } while(0) #elif defined(__riscv) && !TUSB_MCU_VENDOR_ESPRESSIF diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 973bb43cc..c33c970e4 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -920,7 +920,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c // sub millisecond interval p_qhd->interval_ms = 0; p_qhd->int_smask = (interval == 1) ? 0xff : // 0b11111111 - (interval == 2) ? 0xaa /* 0b10101010 */ : 0x44 /* 01000100 */; + (interval == 2) ? 0xaa /* 0b10101010 */ : 0x44 /* 0b01000100 */; } else { p_qhd->interval_ms = (uint8_t) tu_min16(1 << (interval - 4), 255); p_qhd->int_smask = TU_BIT(interval % 8); -- cgit v1.3.1 From 9fac6dd49d9cd681ed9140c124d3001b6d1491be Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Nov 2025 14:04:58 +0700 Subject: fix more alerts found by pvs-studio --- .PVS-Studio/.pvsconfig | 11 +- .clang-format | 5 +- .github/copilot-instructions.md | 24 ++ .../net_lwip_webserver/src/usb_descriptors.c | 251 +++++++++++---------- hw/bsp/imxrt/family.cmake | 3 +- hw/bsp/rp2040/family.c | 4 +- src/class/cdc/cdc_device.c | 23 +- src/class/cdc/cdc_device.h | 13 +- src/class/msc/msc_device.c | 79 ++++--- src/class/msc/msc_host.c | 8 +- src/common/tusb_debug.h | 14 +- src/osal/osal_pico.h | 5 +- 12 files changed, 244 insertions(+), 196 deletions(-) (limited to 'examples') diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 2cc60722a..a60d6dd2b 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,13 +1,14 @@ //V_EXCLUDE_PATH */iar/cxarm* -//V_EXCLUDE_PATH */pico-sdk/ -//V_EXCLUDE_PATH */esp-idf/ -//V_EXCLUDE_PATH */hw/bsp/espressif/components/ -//V_EXCLUDE_PATH */hw/mcu/ +//V_EXCLUDE_PATH */pico-sdk/* +//V_EXCLUDE_PATH */esp-idf/* +//V_EXCLUDE_PATH */hw/mcu/* +//V_EXCLUDE_PATH */hw/bsp/espressif/components/* +//V_EXCLUDE_PATH */lib/* //-V::2506 MISRA. A function should have a single point of exit at the end. //-V::2514 MISRA. Unions should not be used. //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. -//-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V:memmove:2547 [MISRA-C-17.7] The return value of non-void function 'memmove' should be used. //-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES diff --git a/.clang-format b/.clang-format index 79a160a8d..c7d769172 100644 --- a/.clang-format +++ b/.clang-format @@ -33,7 +33,8 @@ AllowAllConstructorInitializersOnNextLine: false AllowAllParametersOfDeclarationOnNextLine: false AllowShortBlocksOnASingleLine: Empty AllowShortCaseExpressionOnASingleLine: true -AllowShortCaseLabelsOnASingleLine: true +AllowShortCaseLabelsOnASingleLine: false +AllowShortEnumsOnASingleLine: false AllowShortFunctionsOnASingleLine: None AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes @@ -76,6 +77,8 @@ MacroBlockBegin: '' MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All +QualifierAlignment: Custom +QualifierOrder: ['static', 'const', 'volatile', 'restrict', 'type'] ReflowComments: false SpaceAfterTemplateKeyword: false SpaceBeforeRangeBasedForLoopColon: false diff --git a/.github/copilot-instructions.md b/.github/copilot-instructions.md index 9982583cd..9f9ab7e72 100644 --- a/.github/copilot-instructions.md +++ b/.github/copilot-instructions.md @@ -88,6 +88,30 @@ python3 tools/build.py -b BOARD_NAME - Check spelling: `pip install codespell && codespell` (uses `.codespellrc` config) - Pre-commit hooks validate unit tests and code quality automatically +### Static Analysis with PVS-Studio +- **Analyze whole project**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Analyze specific source files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S path/to/file.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Multiple specific files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S src/file1.c -S src/file2.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- Requires `compile_commands.json` in the build directory (generated by CMake with `-DCMAKE_EXPORT_COMPILE_COMMANDS=ON`) +- Use `-f` option to specify path to `compile_commands.json` +- Use `-R .PVS-Studio/.pvsconfig` to specify rule configuration file +- Use `-j12` for parallel analysis with 12 threads +- `--dump-files` saves preprocessed files for debugging +- `--misra-c-version 2023` enables MISRA C:2023 checks +- `--misra-cpp-version 2008` enables MISRA C++:2008 checks +- `--use-old-parser` uses legacy parser for compatibility +- Analysis takes ~10-30 seconds depending on project size. Set timeout to 5+ minutes. +- View results: `plog-converter -a GA:1,2 -t errorfile pvs-report.log` or open in PVS-Studio GUI + ## Validation ### ALWAYS Run These After Making Changes diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 1bc568983..b49962d65 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -24,6 +24,7 @@ */ #include "bsp/board_api.h" +#include "class/net/net_device.h" #include "tusb.h" /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. @@ -32,35 +33,34 @@ * Auto ProductID layout's Bitmap: * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ - PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID \ + (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | \ + PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5)) // String Descriptor Index -enum -{ +enum { STRID_LANGID = 0, STRID_MANUFACTURER, STRID_PRODUCT, STRID_SERIAL, STRID_INTERFACE, - STRID_MAC + STRID_MAC, + STRID_COUNT }; -enum -{ +enum { ITF_NUM_CDC = 0, ITF_NUM_CDC_DATA, ITF_NUM_TOTAL }; -enum -{ +enum { #if CFG_TUD_ECM_RNDIS CONFIG_ID_RNDIS = 0, CONFIG_ID_ECM = 1, #else - CONFIG_ID_NCM = 0, + CONFIG_ID_NCM = 0, #endif CONFIG_ID_COUNT }; @@ -68,103 +68,103 @@ enum //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -static tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, +static const tusb_desc_device_t desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, #if CFG_TUD_NCM - .bcdUSB = 0x0201, + .bcdUSB = 0x0201, #else - .bcdUSB = 0x0200, + .bcdUSB = 0x0200, #endif - // Use Interface Association Descriptor (IAD) device class - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, + // Use Interface Association Descriptor (IAD) device class + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0101, + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0101, - .iManufacturer = STRID_MANUFACTURER, - .iProduct = STRID_PRODUCT, - .iSerialNumber = STRID_SERIAL, + .iManufacturer = STRID_MANUFACTURER, + .iProduct = STRID_PRODUCT, + .iSerialNumber = STRID_SERIAL, - .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations + .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations }; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +const uint8_t *tud_descriptor_device_cb(void) { + return (const uint8_t *)&desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) -#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) -#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) +#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) +#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) +#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #elif CFG_TUSB_MCU == OPT_MCU_CXD56 - // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number - // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) - #define EPNUM_NET_NOTIF 0x83 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x81 +// CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number +// 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) +#define EPNUM_NET_NOTIF 0x83 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x81 #elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) - // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x83 +// MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x83 #else - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #endif #if CFG_TUD_ECM_RNDIS -static uint8_t const rndis_configuration[] = -{ +static uint8_t const rndis_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS+1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS + 1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), + TUD_RNDIS_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), }; -static uint8_t const ecm_configuration[] = -{ +static const uint8_t ecm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM+1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM + 1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_ECM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #else -static uint8_t const ncm_configuration[] = -{ +static uint8_t const ncm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM+1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM + 1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_NCM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_NCM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #endif @@ -173,21 +173,19 @@ static uint8_t const ncm_configuration[] = // - Windows only works with RNDIS // - MacOS only works with CDC-ECM // - Linux will work on both -static uint8_t const * const configuration_arr[2] = -{ +static const uint8_t *const configuration_arr[CONFIG_ID_COUNT] = { #if CFG_TUD_ECM_RNDIS [CONFIG_ID_RNDIS] = rndis_configuration, - [CONFIG_ID_ECM ] = ecm_configuration + [CONFIG_ID_ECM] = ecm_configuration #else - [CONFIG_ID_NCM ] = ncm_configuration + [CONFIG_ID_NCM] = ncm_configuration #endif }; // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +const uint8_t *tud_descriptor_configuration_cb(uint8_t index) { return (index < CONFIG_ID_COUNT) ? configuration_arr[index] : NULL; } @@ -213,81 +211,84 @@ https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ (Section Microsoft OS compatibility descriptors) */ -#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) -#define MS_OS_20_DESC_LEN 0xB2 +#define MS_OS_20_DESC_LEN 0xB2 // BOS Descriptor is required for webUSB -uint8_t const desc_bos[] = -{ +const uint8_t desc_bos[] = { // total length, number of device caps TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), // Microsoft OS 2.0 descriptor - TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1) -}; + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1)}; -uint8_t const * tud_descriptor_bos_cb(void) -{ +const uint8_t *tud_descriptor_bos_cb(void) { return desc_bos; } -uint8_t const desc_ms_os_20[] = -{ +const uint8_t desc_ms_os_20[] = { // Set header: length, type, windows version, total length - U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), + U16_TO_U8S_LE(MS_OS_20_DESC_LEN), // Configuration subset header: length, type, configuration index, reserved, configuration total length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A), // Function Subset header: length, type, first interface, reserved, subset length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08), // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID - U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible // MS OS 2.0 Registry property descriptor: length, type - U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), - U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 - 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, - 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08 - 0x08 - 0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), + U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, 'r', + 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, U16_TO_U8S_LE(0x0050), // wPropertyDataLength - //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} - '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, - '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, - '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, - '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00 -}; + //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} + '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, '0', + 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, '8', 0x00, + 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, '8', 0x00, 'A', + 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00}; TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); // Invoked when a control transfer occurred on an interface of this class // Driver response accordingly to the request and the transfer stage (setup/data/ack) // return false to stall control endpoint (e.g unsupported request) -bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const* request) { +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request) { // nothing to with DATA & ACK stage - if (stage != CONTROL_STAGE_SETUP) return true; + if (stage != CONTROL_STAGE_SETUP) { + return true; + } switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_VENDOR: - switch (request->bRequest) { + switch (request->bRequest) { //-V2520 //-V2659 case 1: if (request->wIndex == 7) { // Get Microsoft OS 2.0 compatible descriptor uint16_t total_len; memcpy(&total_len, desc_ms_os_20 + 8, 2); - return tud_control_xfer(rhport, request, (void*)(uintptr_t)desc_ms_os_20, total_len); + return tud_control_xfer(rhport, request, (void *)(uintptr_t)desc_ms_os_20, total_len); } else { return false; } - default: break; + default: + break; // nothing to do } break; - default: break; + default: + break; // nothing to do } // stall unknown request @@ -300,26 +301,24 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ //--------------------------------------------------------------------+ // array of pointer to string descriptors -static char const* string_desc_arr [] = -{ - [STRID_LANGID] = (const char[]) { 0x09, 0x04 }, // supported language is English (0x0409) - [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer - [STRID_PRODUCT] = "TinyUSB Device", // Product - [STRID_SERIAL] = NULL, // Serials will use unique ID if possible - [STRID_INTERFACE] = "TinyUSB Network Interface" // Interface Description - - // STRID_MAC index is handled separately +static const char *string_desc_arr[STRID_COUNT] = { + [STRID_LANGID] = (const char[]){0x09, 0x04}, // supported language is English (0x0409) + [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer + [STRID_PRODUCT] = "TinyUSB Device", // Product + [STRID_SERIAL] = NULL, // Serials will use unique ID if possible + [STRID_INTERFACE] = "TinyUSB Network Interface", // Interface Description + [STRID_MAC] = NULL // STRID_MAC index is handled separately }; static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - (void) langid; +const uint16_t *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void)langid; unsigned int chr_count = 0; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; @@ -331,34 +330,40 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { case STRID_MAC: // Convert MAC address into UTF-16 - for (unsigned i=0; i> 4) & 0xf]; - _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; + for (unsigned i = 0; i < sizeof(tud_network_mac_address); i++) { + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 4) & 0xf]; + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; } break; - default: + default: { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (index >= sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); - size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + + const size_t max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; + } } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); return _desc_str; } diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 100deba1f..11cc00983 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -56,10 +56,9 @@ function(family_add_board BOARD_TARGET) endif() endforeach() - target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS - CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\"NonCacheable\"\)\)\) + [=[CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))]=] ) if (NOT M4 STREQUAL "1") diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 35e5fc923..a51b3f758 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -105,7 +105,9 @@ static bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); // Note we can't call into any sleep functions in flash right now - for (volatile int i = 0; i < 1000; ++i) {} + for (volatile int i = 0; i < 1000; ++i) { + __nop(); + } // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. // Note the button pulls the pin *low* when pressed. diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 577a92a52..b3253b141 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -270,7 +270,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { TU_VERIFY(tud_ready(), 0); // Skip if usb is not ready yet // No data to send - if (!tu_fifo_count(&p_cdc->tx_ff)) { + if (0 == tu_fifo_count(&p_cdc->tx_ff)) { return 0; } @@ -279,7 +279,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { // Pull data from FIFO const uint16_t count = tu_fifo_read_n(&p_cdc->tx_ff, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); - if (count) { + if (count > 0) { TU_ASSERT(usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_in, p_epbuf->epin, count), 0); return count; } else { @@ -337,15 +337,15 @@ bool cdcd_deinit(void) { #if OSAL_MUTEX_REQUIRED for(uint8_t i=0; irx_ff.mutex_rd; - osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; + const osal_mutex_t mutex_rd = p_cdc->rx_ff.mutex_rd; + const osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; - if (mutex_rd) { + if (mutex_rd != NULL) { osal_mutex_delete(mutex_rd); tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, NULL); } - if (mutex_wr) { + if (mutex_wr != NULL) { osal_mutex_delete(mutex_wr); tu_fifo_config_mutex(&p_cdc->tx_ff, NULL, NULL); } @@ -449,13 +449,15 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } TU_VERIFY(itf < CFG_TUD_CDC); - switch (request->bRequest) { + switch (request->bRequest) { //-V2520 //-V2659 case CDC_REQUEST_SET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { TU_LOG_DRV(" Set Line Coding\r\n"); tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } else if (stage == CONTROL_STAGE_ACK) { tud_cdc_line_coding_cb(itf, &p_cdc->line_coding); + } else { + // nothing to do } break; @@ -491,6 +493,8 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ // Invoke callback tud_cdc_line_state_cb(itf, dtr, rts); + } else { + // nothing to do } break; @@ -500,7 +504,10 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } else if (stage == CONTROL_STAGE_ACK) { TU_LOG_DRV(" Send Break\r\n"); tud_cdc_send_break_cb(itf, request->wValue); + } else { + // nothing to do } + break; default: @@ -558,7 +565,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ if (0 == tud_cdc_n_write_flush(itf)) { // If there is no data left, a ZLP should be sent if // xferred_bytes is multiple of EP Packet size and not zero - if (!tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { + if (0 == tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes > 0 && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { if (usbd_edpt_claim(rhport, p_cdc->ep_in)) { TU_ASSERT(usbd_edpt_xfer(rhport, p_cdc->ep_in, NULL, 0)); } diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index c321f3d16..f30f93bc6 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -53,15 +53,16 @@ // Driver Configuration //--------------------------------------------------------------------+ typedef struct TU_ATTR_PACKED { - uint8_t rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect - uint8_t tx_persistent : 1; // keep tx fifo data even with reset or disconnect - uint8_t tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten + bool rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect + bool tx_persistent : 1; // keep tx fifo data even with reset or disconnect + bool tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten } tud_cdc_configure_t; +TU_VERIFY_STATIC(sizeof(tud_cdc_configure_t) == 1, "size is not correct"); #define TUD_CDC_CONFIGURE_DEFAULT() { \ - .rx_persistent = 0, \ - .tx_persistent = 0, \ - .tx_overwritabe_if_not_connected = 1, \ + .rx_persistent = false, \ + .tx_persistent = false, \ + .tx_overwritabe_if_not_connected = false, \ } // Configure CDC driver behavior diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index b0eafd5da..4ba34c7dc 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -83,7 +83,7 @@ typedef struct { uint8_t add_sense_code; uint8_t add_sense_qualifier; - uint8_t pending_io; // pending async IO + bool pending_io; // pending async IO }mscd_interface_t; static mscd_interface_t _mscd_itf; @@ -92,6 +92,8 @@ CFG_TUD_MEM_SECTION static struct { TUD_EPBUF_DEF(buf, CFG_TUD_MSC_EP_BUFSIZE); } _mscd_epbuf; +TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE >= 64, "CFG_TUD_MSC_EP_BUFSIZE must be at least 64"); + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -107,16 +109,16 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); } -static inline bool send_csw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { // Data residue is always = host expect - actual transferred uint8_t rhport = p_msc->rhport; p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; p_msc->stage = MSC_STAGE_STATUS_SENT; - memcpy(_mscd_epbuf.buf, &p_msc->csw, sizeof(msc_csw_t)); + memcpy(_mscd_epbuf.buf, (uint8_t*) &p_msc->csw, sizeof(msc_csw_t)); //-V1086 return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t)); } -static inline bool prepare_cbw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool prepare_cbw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t)); @@ -133,7 +135,7 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { // failed but sense key is not set: default to Illegal Request if (p_msc->sense_key == 0) { - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); } // If there is data stage and not yet complete, stall it @@ -146,18 +148,18 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { } } -static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { +TU_ATTR_ALWAYS_INLINE static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { // use offsetof to avoid pointer to the odd/unaligned address const uint32_t lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba)); return tu_ntohl(lba); // lba is in Big Endian } -static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { uint16_t const block_count = tu_unaligned_read16(cbw->command + offsetof(scsi_write10_t, block_count)); return tu_ntohs(block_count); } -static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { // first extract block count in the command uint16_t const block_count = rdwr10_get_blockcount(cbw); if (block_count == 0) { @@ -171,7 +173,7 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint16_t const block_count = rdwr10_get_blockcount(cbw); if (cbw->total_bytes == 0) { - if (block_count) { + if (block_count > 0) { TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else { @@ -190,6 +192,8 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { } else if (cbw->total_bytes / block_count == 0) { TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; + } else { + // nothing to do } } @@ -309,7 +313,7 @@ bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, u TU_ATTR_ALWAYS_INLINE static inline void set_sense_medium_not_present(uint8_t lun) { // default sense is NOT READY, MEDIUM NOT PRESENT - tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); + (void) tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } static void proc_async_io_done(void *bytes_io) { @@ -318,7 +322,7 @@ static void proc_async_io_done(void *bytes_io) { const int32_t nbytes = (int32_t) (intptr_t) bytes_io; const uint8_t cmd = p_msc->cbw.command[0]; - p_msc->pending_io = 0; + p_msc->pending_io = false; switch (cmd) { case SCSI_CMD_READ_10: proc_read_io_data(p_msc, nbytes); @@ -328,7 +332,7 @@ static void proc_async_io_done(void *bytes_io) { proc_write_io_data(p_msc, (uint32_t) nbytes, nbytes); break; - default: break; + default: break; // nothing to do } // send status if stage is transitioned to STATUS @@ -429,6 +433,8 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_ASSERT(prepare_cbw(p_msc)); } } + } else { + // nothing to do } } @@ -438,7 +444,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t // From this point only handle class request only TU_VERIFY(request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS); - switch ( request->bRequest ) { + switch (request->bRequest) { //-V2520 //-V2659 case MSC_REQ_RESET: TU_LOG_DRV(" MSC BOT Reset\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 0); @@ -451,7 +457,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_VERIFY(request->wValue == 0 && request->wLength == 1); uint8_t maxlun = tud_msc_get_maxlun_cb(); - TU_VERIFY(maxlun); + TU_VERIFY(maxlun != 0); maxlun--; // MAX LUN is minus 1 by specs tud_control_xfer(rhport, request, &maxlun, 1); break; @@ -510,7 +516,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if (status != MSC_CSW_STATUS_PASSED) { fail_scsi_op(p_msc, status); - } else if (p_cbw->total_bytes) { + } else if (p_cbw->total_bytes > 0) { if (SCSI_CMD_READ_10 == p_cbw->command[0]) { proc_read10_cmd(p_msc); } else { @@ -547,7 +553,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t TU_LOG_DRV(" SCSI unsupported or failed command\r\n"); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else if (resplen == 0) { - if (p_cbw->total_bytes) { + if (p_cbw->total_bytes > 0) { // 6.7 The 13 Cases: case 4 (Hi > Dn) // TU_LOG_DRV(" SCSI case 4 (Hi > Dn): %lu\r\n", p_cbw->total_bytes); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); @@ -647,7 +653,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } break; - default: break; + default: break; // nothing to do } if (p_msc->stage == MSC_STAGE_STATUS) { @@ -683,9 +689,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } break; - case SCSI_CMD_START_STOP_UNIT: + case SCSI_CMD_START_STOP_UNIT: { resplen = 0; - scsi_start_stop_unit_t const* start_stop = (scsi_start_stop_unit_t const*)scsi_cmd; if (!tud_msc_start_stop_cb(lun, start_stop->power_condition, start_stop->start, start_stop->load_eject)) { // Failed status response @@ -697,10 +702,10 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; + } - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: { resplen = 0; - scsi_prevent_allow_medium_removal_t const* prevent_allow = (scsi_prevent_allow_medium_removal_t const*)scsi_cmd; if (!tud_msc_prevent_allow_medium_removal_cb(lun, prevent_allow->prohibit_removal, prevent_allow->control)) { // Failed status response @@ -712,7 +717,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; - + } case SCSI_CMD_READ_CAPACITY_10: { uint32_t block_count; @@ -740,8 +745,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_capa10); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_capa10, (size_t) resplen)); } + break; } - break; case SCSI_CMD_READ_FORMAT_CAPACITY: { scsi_read_format_capacity_data_t read_fmt_capa = { @@ -772,8 +777,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_fmt_capa); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_fmt_capa, (size_t) resplen)); } + break; } - break; case SCSI_CMD_INQUIRY: { scsi_inquiry_resp_t *inquiry_rsp = (scsi_inquiry_resp_t *) buffer; @@ -789,8 +794,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ tud_msc_inquiry_cb(lun, inquiry_rsp->vendor_id, inquiry_rsp->product_id, inquiry_rsp->product_rev); resplen = sizeof(scsi_inquiry_resp_t); } + break; } - break; case SCSI_CMD_MODE_SENSE_6: { scsi_mode_sense6_resp_t mode_resp = { @@ -807,8 +812,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(mode_resp); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &mode_resp, (size_t) resplen)); + break; } - break; case SCSI_CMD_REQUEST_SENSE: { scsi_sense_fixed_resp_t sense_rsp = { @@ -828,9 +833,9 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = tud_msc_request_sense_cb(lun, buffer, (uint16_t)bufsize); // Clear sense data after copy - tud_msc_set_sense(lun, 0, 0, 0); + (void) tud_msc_set_sense(lun, 0, 0, 0); + break; } - break; default: resplen = -1; break; @@ -842,6 +847,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ static void proc_read10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; @@ -849,10 +855,10 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { // remaining bytes capped at class buffer int32_t nbytes = (int32_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); - p_msc->pending_io = 1; + p_msc->pending_io = true; nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_read_io_data(p_msc, nbytes); } } @@ -876,19 +882,19 @@ static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); break; - default: break; + default: break; // nothing to do } } } static void proc_write10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; - bool writable = tud_msc_is_writable_cb(p_cbw->lun); + const bool writable = tud_msc_is_writable_cb(p_cbw->lun); if (!writable) { // Not writable, complete this SCSI op with error // Sense = Write protected - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); return; } @@ -903,15 +909,16 @@ static void proc_write10_cmd(mscd_interface_t* p_msc) { static void proc_write10_host_data(mscd_interface_t* p_msc, uint32_t xferred_bytes) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; - p_msc->pending_io = 1; + p_msc->pending_io = true; int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_write_io_data(p_msc, xferred_bytes, nbytes); } } @@ -927,7 +934,7 @@ static void proc_write_io_data(mscd_interface_t* p_msc, uint32_t xferred_bytes, fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); break; - default: break; + default: break; // nothing to do } } else { if ((uint32_t)nbytes < xferred_bytes) { diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index eb69ae400..5aa27c196 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -191,7 +191,7 @@ bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* respons .cmd_code = SCSI_CMD_INQUIRY, .alloc_length = sizeof(scsi_inquiry_resp_t) }; - memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); + memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -225,7 +225,7 @@ bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void* response, .cmd_code = SCSI_CMD_REQUEST_SENSE, .alloc_length = 18 }; - memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); + memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -247,7 +247,7 @@ bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void* buffer, uint32_t lba, u .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_read10, cbw.cmd_len); + memcpy(cbw.command, &cmd_read10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } @@ -269,7 +269,7 @@ bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const* buffer, uint32_t .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_write10, cbw.cmd_len); + memcpy(cbw.command, &cmd_write10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, (void*) (uintptr_t) buffer, complete_cb, arg); } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index a7bf3e959..905dc239c 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -61,9 +61,9 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); TU_ATTR_ALWAYS_INLINE static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i= 2 diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index ace5907d7..f5385071a 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -81,8 +81,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { (void) in_isr; - sem_release(sem_hdl); - return true; + return sem_release(sem_hdl); } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { @@ -139,7 +138,7 @@ typedef osal_queue_def_t* osal_queue_t; TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { critical_section_init(&qdef->critsec); - tu_fifo_clear(&qdef->ff); + (void) tu_fifo_clear(&qdef->ff); return (osal_queue_t) qdef; } -- cgit v1.3.1 From 4fcce0fbc909038f5328f5ad01d6bfa641181e65 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 7 Nov 2025 13:19:33 +0100 Subject: Implement RX FIFO threshold adjustment Signed-off-by: HiFiPhile --- examples/device/uac2_speaker_fb/src/main.c | 23 ++++++++++++++++------- src/class/audio/audio_device.c | 14 +++++++------- src/class/audio/audio_device.h | 8 +++++--- 3 files changed, 28 insertions(+), 17 deletions(-) (limited to 'examples') diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index f2cfb155e..7b4e2d64c 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -35,13 +35,6 @@ // MACRO CONSTANT TYPEDEF PROTOTYPES //--------------------------------------------------------------------+ -// List of supported sample rates for UAC2 -const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; - -#define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) - -uint32_t current_sample_rate = 44100; - /* Blink pattern * - 25 ms : streaming data * - 250 ms : device not mounted @@ -76,6 +69,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; // Current states uint8_t mute[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1]; // +1 for master channel 0 int16_t volume[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX + 1];// +1 for master channel 0 +uint32_t current_sample_rate = 44100; // Buffer for speaker data uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ / 2]; @@ -316,6 +310,10 @@ static bool audio10_get_req_entity(uint8_t rhport, tusb_control_request_t const //--------------------------------------------------------------------+ #if TUD_OPT_HIGH_SPEED +// List of supported sample rates for UAC2 +const uint32_t sample_rates[] = {44100, 48000, 88200, 96000}; + +#define N_SAMPLE_RATES TU_ARRAY_SIZE(sample_rates) static bool audio20_clock_get_request(uint8_t rhport, audio20_control_request_t const *request) { TU_ASSERT(request->bEntityID == UAC2_ENTITY_CLOCK); @@ -548,6 +546,17 @@ void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedba // Set feedback method to fifo counting feedback_param->method = AUDIO_FEEDBACK_METHOD_FIFO_COUNT; feedback_param->sample_freq = current_sample_rate; + + // About FIFO threshold: + // + // By default the threshold is set to half FIFO size, which works well in most cases, + // you can reduce the threshold to have less latency. + // + // For example, here we could set the threshold to 2 ms of audio data, as audio_task() read audio data every 1 ms, + // having 2 ms threshold allows some margin and a quick response: + // + // feedback_param->fifo_count.fifo_threshold = + // current_sample_rate * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_RX * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_RX / 1000 * 2; } #if CFG_AUDIO_DEBUG diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 328f085a8..32fc4d076 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1546,7 +1546,7 @@ static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt) { // Prepare feedback computation if endpoint is available if (audio->ep_fb != 0) { - audio_feedback_params_t fb_param; + audio_feedback_params_t fb_param = {0}; tud_audio_feedback_params_cb(func_id, alt, &fb_param); audio->feedback.compute_method = fb_param.method; @@ -1587,15 +1587,15 @@ static bool audiod_fb_params_prepare(uint8_t func_id, uint8_t alt) { } break; case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: { - // Initialize the threshold level to half filled - uint16_t fifo_lvl_thr = tu_fifo_depth(&audio->ep_out_ff) / 2; - audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_lvl_thr; - audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_lvl_thr) << 16; + // Determine FIFO threshold + uint16_t fifo_threshold = fb_param.fifo_count.fifo_threshold ? fb_param.fifo_count.fifo_threshold : tu_fifo_depth(&audio->ep_out_ff) / 2; + audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_threshold; + audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_threshold) << 16; // Avoid 64bit division uint32_t nominal = ((fb_param.sample_freq / 100) << 16) / (frame_div / 100); audio->feedback.compute.fifo_count.nom_value = nominal; - audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_lvl_thr); - audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_lvl_thr); + audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_threshold); + audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_threshold); // On HS feedback is more sensitive since packet size can vary every MSOF, could cause instability if (tud_speed_get() == TUSB_SPEED_HIGH) { audio->feedback.compute.fifo_count.rate_const[0] /= 8; diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index ab3684aad..1e0c46915 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -333,10 +333,12 @@ typedef struct { union { struct { uint32_t mclk_freq; // Main clock frequency in Hz i.e. master clock to which sample clock is based on - }frequency; - + } frequency; + struct { + uint16_t fifo_threshold; // Target FIFO threshold level, default to half FIFO if not set + } fifo_count; }; -}audio_feedback_params_t; +} audio_feedback_params_t; // Invoked when needed to set feedback parameters void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedback_params_t* feedback_param); -- cgit v1.3.1 From 652342b57b129a79e0df152377d18096e4a0fed5 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Nov 2025 14:04:58 +0700 Subject: fix more alerts found by pvs-studio --- .PVS-Studio/.pvsconfig | 13 +- .clang-format | 5 +- .github/copilot-instructions.md | 24 ++ examples/device/mtp/src/mtp_fs_example.c | 4 +- .../net_lwip_webserver/src/usb_descriptors.c | 249 +++++++++++---------- hw/bsp/imxrt/family.cmake | 3 +- hw/bsp/rp2040/family.c | 4 +- src/class/cdc/cdc_device.c | 21 +- src/class/cdc/cdc_device.h | 13 +- src/class/msc/msc_device.c | 79 ++++--- src/class/msc/msc_host.c | 22 +- src/common/tusb_debug.h | 14 +- src/device/usbd.c | 10 +- src/host/hcd.h | 2 +- src/host/usbh.c | 112 ++++----- src/osal/osal_pico.h | 5 +- 16 files changed, 317 insertions(+), 263 deletions(-) (limited to 'examples') diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index 2cc60722a..d8654b077 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -1,14 +1,17 @@ //V_EXCLUDE_PATH */iar/cxarm* -//V_EXCLUDE_PATH */pico-sdk/ -//V_EXCLUDE_PATH */esp-idf/ -//V_EXCLUDE_PATH */hw/bsp/espressif/components/ -//V_EXCLUDE_PATH */hw/mcu/ +//V_EXCLUDE_PATH */pico-sdk/* +//V_EXCLUDE_PATH */esp-idf/* +//V_EXCLUDE_PATH */hw/mcu/* +//V_EXCLUDE_PATH */hw/bsp/espressif/components/* +//V_EXCLUDE_PATH */lib/* //-V::2506 MISRA. A function should have a single point of exit at the end. //-V::2514 MISRA. Unions should not be used. +//-V::2520 [MISRA-C-16.3] Every switch-clause should be terminated by an unconditional 'break' statement //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. -//-V:printf:2547 [MISRA-C-17.7] The return value of non-void function 'printf' should be used. +//-V:memmove:2547 [MISRA-C-17.7] The return value of non-void function 'memmove' should be used. //-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES //-V:memcpy:2628 Pointer arguments to the 'memcpy' function should be pointers to qualified or unqualified versions of compatible types. +//-V::2659 [MISRA-C-16.1] Switch statements should be well-formed. Every switch-clause should be terminated by an unconditional 'break' statement diff --git a/.clang-format b/.clang-format index 79a160a8d..c7d769172 100644 --- a/.clang-format +++ b/.clang-format @@ -33,7 +33,8 @@ AllowAllConstructorInitializersOnNextLine: false AllowAllParametersOfDeclarationOnNextLine: false AllowShortBlocksOnASingleLine: Empty AllowShortCaseExpressionOnASingleLine: true -AllowShortCaseLabelsOnASingleLine: true +AllowShortCaseLabelsOnASingleLine: false +AllowShortEnumsOnASingleLine: false AllowShortFunctionsOnASingleLine: None AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes @@ -76,6 +77,8 @@ MacroBlockBegin: '' MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All +QualifierAlignment: Custom +QualifierOrder: ['static', 'const', 'volatile', 'restrict', 'type'] ReflowComments: false SpaceAfterTemplateKeyword: false SpaceBeforeRangeBasedForLoopColon: false diff --git a/.github/copilot-instructions.md b/.github/copilot-instructions.md index 9982583cd..9f9ab7e72 100644 --- a/.github/copilot-instructions.md +++ b/.github/copilot-instructions.md @@ -88,6 +88,30 @@ python3 tools/build.py -b BOARD_NAME - Check spelling: `pip install codespell && codespell` (uses `.codespellrc` config) - Pre-commit hooks validate unit tests and code quality automatically +### Static Analysis with PVS-Studio +- **Analyze whole project**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Analyze specific source files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S path/to/file.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- **Multiple specific files**: + ```bash + pvs-studio-analyzer analyze -f examples/cmake-build-raspberry_pi_pico/compile_commands.json -R .PVS-Studio/.pvsconfig -S src/file1.c -S src/file2.c -o pvs-report.log -j12 --dump-files --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser + ``` +- Requires `compile_commands.json` in the build directory (generated by CMake with `-DCMAKE_EXPORT_COMPILE_COMMANDS=ON`) +- Use `-f` option to specify path to `compile_commands.json` +- Use `-R .PVS-Studio/.pvsconfig` to specify rule configuration file +- Use `-j12` for parallel analysis with 12 threads +- `--dump-files` saves preprocessed files for debugging +- `--misra-c-version 2023` enables MISRA C:2023 checks +- `--misra-cpp-version 2008` enables MISRA C++:2008 checks +- `--use-old-parser` uses legacy parser for compatibility +- Analysis takes ~10-30 seconds depending on project size. Set timeout to 5+ minutes. +- View results: `plog-converter -a GA:1,2 -t errorfile pvs-report.log` or open in PVS-Studio GUI + ## Validation ### ALWAYS Run These After Making Changes diff --git a/examples/device/mtp/src/mtp_fs_example.c b/examples/device/mtp/src/mtp_fs_example.c index 1c287be4d..7fd7db61b 100644 --- a/examples/device/mtp/src/mtp_fs_example.c +++ b/examples/device/mtp/src/mtp_fs_example.c @@ -414,7 +414,7 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { // get describing dataset mtp_device_prop_desc_header_t device_prop_header; device_prop_header.device_property_code = dev_prop_code; - switch (dev_prop_code) { //-V2520 //-V2659 + switch (dev_prop_code) { case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: device_prop_header.datatype = MTP_DATA_TYPE_STR; device_prop_header.get_set = MTP_MODE_GET; @@ -430,7 +430,7 @@ static int32_t fs_get_device_properties(tud_mtp_cb_data_t* cb_data) { } } else { // get value - switch (dev_prop_code) { //-V2520 //-V2659 + switch (dev_prop_code) { case MTP_DEV_PROP_DEVICE_FRIENDLY_NAME: (void) mtp_container_add_cstring(io_container, DEV_PROP_FRIENDLY_NAME); tud_mtp_data_send(io_container); diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 1bc568983..c976cb62b 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -24,6 +24,7 @@ */ #include "bsp/board_api.h" +#include "class/net/net_device.h" #include "tusb.h" /* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug. @@ -32,35 +33,34 @@ * Auto ProductID layout's Bitmap: * [MSB] NET | VENDOR | MIDI | HID | MSC | CDC [LSB] */ -#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) -#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ - PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID \ + (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) | \ + PID_MAP(ECM_RNDIS, 5) | PID_MAP(NCM, 5)) // String Descriptor Index -enum -{ +enum { STRID_LANGID = 0, STRID_MANUFACTURER, STRID_PRODUCT, STRID_SERIAL, STRID_INTERFACE, - STRID_MAC + STRID_MAC, + STRID_COUNT }; -enum -{ +enum { ITF_NUM_CDC = 0, ITF_NUM_CDC_DATA, ITF_NUM_TOTAL }; -enum -{ +enum { #if CFG_TUD_ECM_RNDIS CONFIG_ID_RNDIS = 0, CONFIG_ID_ECM = 1, #else - CONFIG_ID_NCM = 0, + CONFIG_ID_NCM = 0, #endif CONFIG_ID_COUNT }; @@ -68,103 +68,103 @@ enum //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -static tusb_desc_device_t const desc_device = -{ - .bLength = sizeof(tusb_desc_device_t), - .bDescriptorType = TUSB_DESC_DEVICE, +static const tusb_desc_device_t desc_device = { + .bLength = sizeof(tusb_desc_device_t), + .bDescriptorType = TUSB_DESC_DEVICE, #if CFG_TUD_NCM - .bcdUSB = 0x0201, + .bcdUSB = 0x0201, #else - .bcdUSB = 0x0200, + .bcdUSB = 0x0200, #endif - // Use Interface Association Descriptor (IAD) device class - .bDeviceClass = TUSB_CLASS_MISC, - .bDeviceSubClass = MISC_SUBCLASS_COMMON, - .bDeviceProtocol = MISC_PROTOCOL_IAD, + // Use Interface Association Descriptor (IAD) device class + .bDeviceClass = TUSB_CLASS_MISC, + .bDeviceSubClass = MISC_SUBCLASS_COMMON, + .bDeviceProtocol = MISC_PROTOCOL_IAD, - .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, + .bMaxPacketSize0 = CFG_TUD_ENDPOINT0_SIZE, - .idVendor = 0xCafe, - .idProduct = USB_PID, - .bcdDevice = 0x0101, + .idVendor = 0xCafe, + .idProduct = USB_PID, + .bcdDevice = 0x0101, - .iManufacturer = STRID_MANUFACTURER, - .iProduct = STRID_PRODUCT, - .iSerialNumber = STRID_SERIAL, + .iManufacturer = STRID_MANUFACTURER, + .iProduct = STRID_PRODUCT, + .iSerialNumber = STRID_SERIAL, - .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations + .bNumConfigurations = CONFIG_ID_COUNT // multiple configurations }; // Invoked when received GET DEVICE DESCRIPTOR // Application return pointer to descriptor -uint8_t const * tud_descriptor_device_cb(void) -{ - return (uint8_t const *) &desc_device; +const uint8_t *tud_descriptor_device_cb(void) { + return (const uint8_t *)&desc_device; } //--------------------------------------------------------------------+ // Configuration Descriptor //--------------------------------------------------------------------+ -#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) -#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) -#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) +#define MAIN_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_RNDIS_DESC_LEN) +#define ALT_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_ECM_DESC_LEN) +#define NCM_CONFIG_TOTAL_LEN (TUD_CONFIG_DESC_LEN + TUD_CDC_NCM_DESC_LEN) #if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX - // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number - // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number +// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ... +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #elif CFG_TUSB_MCU == OPT_MCU_CXD56 - // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number - // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) - #define EPNUM_NET_NOTIF 0x83 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x81 +// CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number +// 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN) +#define EPNUM_NET_NOTIF 0x83 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x81 #elif defined(TUD_ENDPOINT_ONE_DIRECTION_ONLY) - // MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h - // e.g EP1 OUT & EP1 IN cannot exist together - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x83 +// MCUs that don't support a same endpoint number with different direction IN and OUT defined in tusb_mcu.h +// e.g EP1 OUT & EP1 IN cannot exist together +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x83 #else - #define EPNUM_NET_NOTIF 0x81 - #define EPNUM_NET_OUT 0x02 - #define EPNUM_NET_IN 0x82 +#define EPNUM_NET_NOTIF 0x81 +#define EPNUM_NET_OUT 0x02 +#define EPNUM_NET_IN 0x82 #endif #if CFG_TUD_ECM_RNDIS -static uint8_t const rndis_configuration[] = -{ +static uint8_t const rndis_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS+1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_RNDIS + 1, ITF_NUM_TOTAL, 0, MAIN_CONFIG_TOTAL_LEN, 0, 100), // Interface number, string index, EP notification address and size, EP data address (out, in) and size. - TUD_RNDIS_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), + TUD_RNDIS_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, EPNUM_NET_NOTIF, 8, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE), }; -static uint8_t const ecm_configuration[] = -{ +static const uint8_t ecm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM+1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_ECM + 1, ITF_NUM_TOTAL, 0, ALT_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_ECM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_ECM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #else -static uint8_t const ncm_configuration[] = -{ +static uint8_t const ncm_configuration[] = { // Config number (index+1), interface count, string index, total length, attribute, power in mA - TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM+1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), + TUD_CONFIG_DESCRIPTOR(CONFIG_ID_NCM + 1, ITF_NUM_TOTAL, 0, NCM_CONFIG_TOTAL_LEN, 0, 100), // Interface number, description string index, MAC address string index, EP notification address and size, EP data address (out, in), and size, max segment size. - TUD_CDC_NCM_DESCRIPTOR(ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), + TUD_CDC_NCM_DESCRIPTOR( + ITF_NUM_CDC, STRID_INTERFACE, STRID_MAC, EPNUM_NET_NOTIF, 64, EPNUM_NET_OUT, EPNUM_NET_IN, + CFG_TUD_NET_ENDPOINT_SIZE, CFG_TUD_NET_MTU), }; #endif @@ -173,21 +173,19 @@ static uint8_t const ncm_configuration[] = // - Windows only works with RNDIS // - MacOS only works with CDC-ECM // - Linux will work on both -static uint8_t const * const configuration_arr[2] = -{ +static const uint8_t *const configuration_arr[CONFIG_ID_COUNT] = { #if CFG_TUD_ECM_RNDIS [CONFIG_ID_RNDIS] = rndis_configuration, - [CONFIG_ID_ECM ] = ecm_configuration + [CONFIG_ID_ECM] = ecm_configuration #else - [CONFIG_ID_NCM ] = ncm_configuration + [CONFIG_ID_NCM] = ncm_configuration #endif }; // Invoked when received GET CONFIGURATION DESCRIPTOR // Application return pointer to descriptor // Descriptor contents must exist long enough for transfer to complete -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +const uint8_t *tud_descriptor_configuration_cb(uint8_t index) { return (index < CONFIG_ID_COUNT) ? configuration_arr[index] : NULL; } @@ -213,61 +211,62 @@ https://developers.google.com/web/fundamentals/native-hardware/build-for-webusb/ (Section Microsoft OS compatibility descriptors) */ -#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) +#define BOS_TOTAL_LEN (TUD_BOS_DESC_LEN + TUD_BOS_MICROSOFT_OS_DESC_LEN) -#define MS_OS_20_DESC_LEN 0xB2 +#define MS_OS_20_DESC_LEN 0xB2 // BOS Descriptor is required for webUSB -uint8_t const desc_bos[] = -{ +const uint8_t desc_bos[] = { // total length, number of device caps TUD_BOS_DESCRIPTOR(BOS_TOTAL_LEN, 1), // Microsoft OS 2.0 descriptor - TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1) -}; + TUD_BOS_MS_OS_20_DESCRIPTOR(MS_OS_20_DESC_LEN, 1)}; -uint8_t const * tud_descriptor_bos_cb(void) -{ +const uint8_t *tud_descriptor_bos_cb(void) { return desc_bos; } -uint8_t const desc_ms_os_20[] = -{ +const uint8_t desc_ms_os_20[] = { // Set header: length, type, windows version, total length - U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), U16_TO_U8S_LE(MS_OS_20_DESC_LEN), + U16_TO_U8S_LE(0x000A), U16_TO_U8S_LE(MS_OS_20_SET_HEADER_DESCRIPTOR), U32_TO_U8S_LE(0x06030000), + U16_TO_U8S_LE(MS_OS_20_DESC_LEN), // Configuration subset header: length, type, configuration index, reserved, configuration total length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_CONFIGURATION), 0, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A), // Function Subset header: length, type, first interface, reserved, subset length - U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08), + U16_TO_U8S_LE(0x0008), U16_TO_U8S_LE(MS_OS_20_SUBSET_HEADER_FUNCTION), ITF_NUM_CDC, 0, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08), // MS OS 2.0 Compatible ID descriptor: length, type, compatible ID, sub compatible ID - U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible + U16_TO_U8S_LE(0x0014), U16_TO_U8S_LE(MS_OS_20_FEATURE_COMPATBLE_ID), 'W', 'I', 'N', 'N', 'C', 'M', 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // sub-compatible // MS OS 2.0 Registry property descriptor: length, type - U16_TO_U8S_LE(MS_OS_20_DESC_LEN-0x0A-0x08-0x08-0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), - U16_TO_U8S_LE(0x0007), U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 - 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, - 'r', 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, + U16_TO_U8S_LE(MS_OS_20_DESC_LEN - 0x0A - 0x08 - 0x08 - 0x14), U16_TO_U8S_LE(MS_OS_20_FEATURE_REG_PROPERTY), + U16_TO_U8S_LE(0x0007), + U16_TO_U8S_LE(0x002A), // wPropertyDataType, wPropertyNameLength and PropertyName "DeviceInterfaceGUIDs\0" in UTF-16 + 'D', 0x00, 'e', 0x00, 'v', 0x00, 'i', 0x00, 'c', 0x00, 'e', 0x00, 'I', 0x00, 'n', 0x00, 't', 0x00, 'e', 0x00, 'r', + 0x00, 'f', 0x00, 'a', 0x00, 'c', 0x00, 'e', 0x00, 'G', 0x00, 'U', 0x00, 'I', 0x00, 'D', 0x00, 's', 0x00, 0x00, 0x00, U16_TO_U8S_LE(0x0050), // wPropertyDataLength - //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} - '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, - '0', 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, - '8', 0x00, 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, - '8', 0x00, 'A', 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00 -}; + //bPropertyData: {12345678-0D08-43FD-8B3E-127CA8AFFF9D} + '{', 0x00, '1', 0x00, '2', 0x00, '3', 0x00, '4', 0x00, '5', 0x00, '6', 0x00, '7', 0x00, '8', 0x00, '-', 0x00, '0', + 0x00, 'D', 0x00, '0', 0x00, '8', 0x00, '-', 0x00, '4', 0x00, '3', 0x00, 'F', 0x00, 'D', 0x00, '-', 0x00, '8', 0x00, + 'B', 0x00, '3', 0x00, 'E', 0x00, '-', 0x00, '1', 0x00, '2', 0x00, '7', 0x00, 'C', 0x00, 'A', 0x00, '8', 0x00, 'A', + 0x00, 'F', 0x00, 'F', 0x00, 'F', 0x00, '9', 0x00, 'D', 0x00, '}', 0x00, 0x00, 0x00, 0x00, 0x00}; TU_VERIFY_STATIC(sizeof(desc_ms_os_20) == MS_OS_20_DESC_LEN, "Incorrect size"); // Invoked when a control transfer occurred on an interface of this class // Driver response accordingly to the request and the transfer stage (setup/data/ack) // return false to stall control endpoint (e.g unsupported request) -bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const* request) { +bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_request_t *request) { // nothing to with DATA & ACK stage - if (stage != CONTROL_STAGE_SETUP) return true; + if (stage != CONTROL_STAGE_SETUP) { + return true; + } switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_VENDOR: @@ -278,16 +277,18 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ uint16_t total_len; memcpy(&total_len, desc_ms_os_20 + 8, 2); - return tud_control_xfer(rhport, request, (void*)(uintptr_t)desc_ms_os_20, total_len); + return tud_control_xfer(rhport, request, (void *)(uintptr_t)desc_ms_os_20, total_len); } else { return false; } - default: break; + default: + break; // nothing to do } break; - default: break; + default: + break; // nothing to do } // stall unknown request @@ -300,26 +301,24 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_requ //--------------------------------------------------------------------+ // array of pointer to string descriptors -static char const* string_desc_arr [] = -{ - [STRID_LANGID] = (const char[]) { 0x09, 0x04 }, // supported language is English (0x0409) - [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer - [STRID_PRODUCT] = "TinyUSB Device", // Product - [STRID_SERIAL] = NULL, // Serials will use unique ID if possible - [STRID_INTERFACE] = "TinyUSB Network Interface" // Interface Description - - // STRID_MAC index is handled separately +static const char *string_desc_arr[STRID_COUNT] = { + [STRID_LANGID] = (const char[]){0x09, 0x04}, // supported language is English (0x0409) + [STRID_MANUFACTURER] = "TinyUSB", // Manufacturer + [STRID_PRODUCT] = "TinyUSB Device", // Product + [STRID_SERIAL] = NULL, // Serials will use unique ID if possible + [STRID_INTERFACE] = "TinyUSB Network Interface", // Interface Description + [STRID_MAC] = NULL // STRID_MAC index is handled separately }; static uint16_t _desc_str[32 + 1]; // Invoked when received GET STRING DESCRIPTOR request // Application return pointer to descriptor, whose contents must exist long enough for transfer to complete -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { - (void) langid; +const uint16_t *tud_descriptor_string_cb(uint8_t index, uint16_t langid) { + (void)langid; unsigned int chr_count = 0; - switch ( index ) { + switch (index) { case STRID_LANGID: memcpy(&_desc_str[1], string_desc_arr[0], 2); chr_count = 1; @@ -331,34 +330,40 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { case STRID_MAC: // Convert MAC address into UTF-16 - for (unsigned i=0; i> 4) & 0xf]; - _desc_str[1+chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; + for (unsigned i = 0; i < sizeof(tud_network_mac_address); i++) { + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 4) & 0xf]; + _desc_str[1 + chr_count++] = "0123456789ABCDEF"[(tud_network_mac_address[i] >> 0) & 0xf]; } break; - default: + default: { // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors - if ( !(index < sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) ) return NULL; + if (index >= sizeof(string_desc_arr) / sizeof(string_desc_arr[0])) { + return NULL; + } const char *str = string_desc_arr[index]; // Cap at max char chr_count = strlen(str); - size_t const max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type - if ( chr_count > max_count ) chr_count = max_count; + + const size_t max_count = sizeof(_desc_str) / sizeof(_desc_str[0]) - 1; // -1 for string type + if (chr_count > max_count) { + chr_count = max_count; + } // Convert ASCII string into UTF-16 - for ( size_t i = 0; i < chr_count; i++ ) { + for (size_t i = 0; i < chr_count; i++) { _desc_str[1 + i] = str[i]; } break; + } } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); + _desc_str[0] = (uint16_t)((TUSB_DESC_STRING << 8) | (2 * chr_count + 2)); return _desc_str; } diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 100deba1f..11cc00983 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -56,10 +56,9 @@ function(family_add_board BOARD_TARGET) endif() endforeach() - target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS - CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\"NonCacheable\"\)\)\) + [=[CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable")))]=] ) if (NOT M4 STREQUAL "1") diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 35e5fc923..a51b3f758 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -105,7 +105,9 @@ static bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS); // Note we can't call into any sleep functions in flash right now - for (volatile int i = 0; i < 1000; ++i) {} + for (volatile int i = 0; i < 1000; ++i) { + __nop(); + } // The HI GPIO registers in SIO can observe and control the 6 QSPI pins. // Note the button pulls the pin *low* when pressed. diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 577a92a52..e821fffda 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -270,7 +270,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { TU_VERIFY(tud_ready(), 0); // Skip if usb is not ready yet // No data to send - if (!tu_fifo_count(&p_cdc->tx_ff)) { + if (0 == tu_fifo_count(&p_cdc->tx_ff)) { return 0; } @@ -279,7 +279,7 @@ uint32_t tud_cdc_n_write_flush(uint8_t itf) { // Pull data from FIFO const uint16_t count = tu_fifo_read_n(&p_cdc->tx_ff, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); - if (count) { + if (count > 0) { TU_ASSERT(usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_in, p_epbuf->epin, count), 0); return count; } else { @@ -337,15 +337,15 @@ bool cdcd_deinit(void) { #if OSAL_MUTEX_REQUIRED for(uint8_t i=0; irx_ff.mutex_rd; - osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; + const osal_mutex_t mutex_rd = p_cdc->rx_ff.mutex_rd; + const osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; - if (mutex_rd) { + if (mutex_rd != NULL) { osal_mutex_delete(mutex_rd); tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, NULL); } - if (mutex_wr) { + if (mutex_wr != NULL) { osal_mutex_delete(mutex_wr); tu_fifo_config_mutex(&p_cdc->tx_ff, NULL, NULL); } @@ -456,6 +456,8 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } else if (stage == CONTROL_STAGE_ACK) { tud_cdc_line_coding_cb(itf, &p_cdc->line_coding); + } else { + // nothing to do } break; @@ -491,6 +493,8 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ // Invoke callback tud_cdc_line_state_cb(itf, dtr, rts); + } else { + // nothing to do } break; @@ -500,7 +504,10 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } else if (stage == CONTROL_STAGE_ACK) { TU_LOG_DRV(" Send Break\r\n"); tud_cdc_send_break_cb(itf, request->wValue); + } else { + // nothing to do } + break; default: @@ -558,7 +565,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ if (0 == tud_cdc_n_write_flush(itf)) { // If there is no data left, a ZLP should be sent if // xferred_bytes is multiple of EP Packet size and not zero - if (!tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { + if (0 == tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes > 0 && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { if (usbd_edpt_claim(rhport, p_cdc->ep_in)) { TU_ASSERT(usbd_edpt_xfer(rhport, p_cdc->ep_in, NULL, 0)); } diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index c321f3d16..f30f93bc6 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -53,15 +53,16 @@ // Driver Configuration //--------------------------------------------------------------------+ typedef struct TU_ATTR_PACKED { - uint8_t rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect - uint8_t tx_persistent : 1; // keep tx fifo data even with reset or disconnect - uint8_t tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten + bool rx_persistent : 1; // keep rx fifo data even with bus reset or disconnect + bool tx_persistent : 1; // keep tx fifo data even with reset or disconnect + bool tx_overwritabe_if_not_connected : 1; // if not connected, tx fifo can be overwritten } tud_cdc_configure_t; +TU_VERIFY_STATIC(sizeof(tud_cdc_configure_t) == 1, "size is not correct"); #define TUD_CDC_CONFIGURE_DEFAULT() { \ - .rx_persistent = 0, \ - .tx_persistent = 0, \ - .tx_overwritabe_if_not_connected = 1, \ + .rx_persistent = false, \ + .tx_persistent = false, \ + .tx_overwritabe_if_not_connected = false, \ } // Configure CDC driver behavior diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index b0eafd5da..7e0202ddd 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -83,7 +83,7 @@ typedef struct { uint8_t add_sense_code; uint8_t add_sense_qualifier; - uint8_t pending_io; // pending async IO + bool pending_io; // pending async IO }mscd_interface_t; static mscd_interface_t _mscd_itf; @@ -92,6 +92,8 @@ CFG_TUD_MEM_SECTION static struct { TUD_EPBUF_DEF(buf, CFG_TUD_MSC_EP_BUFSIZE); } _mscd_epbuf; +TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE >= 64, "CFG_TUD_MSC_EP_BUFSIZE must be at least 64"); + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -107,16 +109,16 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); } -static inline bool send_csw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool send_csw(mscd_interface_t* p_msc) { // Data residue is always = host expect - actual transferred uint8_t rhport = p_msc->rhport; p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; p_msc->stage = MSC_STAGE_STATUS_SENT; - memcpy(_mscd_epbuf.buf, &p_msc->csw, sizeof(msc_csw_t)); + memcpy(_mscd_epbuf.buf, (uint8_t*) &p_msc->csw, sizeof(msc_csw_t)); //-V1086 return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t)); } -static inline bool prepare_cbw(mscd_interface_t* p_msc) { +TU_ATTR_ALWAYS_INLINE static inline bool prepare_cbw(mscd_interface_t* p_msc) { uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t)); @@ -133,7 +135,7 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { // failed but sense key is not set: default to Illegal Request if (p_msc->sense_key == 0) { - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); } // If there is data stage and not yet complete, stall it @@ -146,18 +148,18 @@ static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { } } -static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { +TU_ATTR_ALWAYS_INLINE static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { // use offsetof to avoid pointer to the odd/unaligned address const uint32_t lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba)); return tu_ntohl(lba); // lba is in Big Endian } -static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { uint16_t const block_count = tu_unaligned_read16(cbw->command + offsetof(scsi_write10_t, block_count)); return tu_ntohs(block_count); } -static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { // first extract block count in the command uint16_t const block_count = rdwr10_get_blockcount(cbw); if (block_count == 0) { @@ -171,7 +173,7 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint16_t const block_count = rdwr10_get_blockcount(cbw); if (cbw->total_bytes == 0) { - if (block_count) { + if (block_count > 0) { TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else { @@ -190,6 +192,8 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { } else if (cbw->total_bytes / block_count == 0) { TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; + } else { + // nothing to do } } @@ -309,7 +313,7 @@ bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, u TU_ATTR_ALWAYS_INLINE static inline void set_sense_medium_not_present(uint8_t lun) { // default sense is NOT READY, MEDIUM NOT PRESENT - tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); + (void) tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } static void proc_async_io_done(void *bytes_io) { @@ -318,7 +322,7 @@ static void proc_async_io_done(void *bytes_io) { const int32_t nbytes = (int32_t) (intptr_t) bytes_io; const uint8_t cmd = p_msc->cbw.command[0]; - p_msc->pending_io = 0; + p_msc->pending_io = false; switch (cmd) { case SCSI_CMD_READ_10: proc_read_io_data(p_msc, nbytes); @@ -328,7 +332,7 @@ static void proc_async_io_done(void *bytes_io) { proc_write_io_data(p_msc, (uint32_t) nbytes, nbytes); break; - default: break; + default: break; // nothing to do } // send status if stage is transitioned to STATUS @@ -429,6 +433,8 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_ASSERT(prepare_cbw(p_msc)); } } + } else { + // nothing to do } } @@ -438,7 +444,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t // From this point only handle class request only TU_VERIFY(request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS); - switch ( request->bRequest ) { + switch (request->bRequest) { case MSC_REQ_RESET: TU_LOG_DRV(" MSC BOT Reset\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 0); @@ -451,7 +457,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t TU_VERIFY(request->wValue == 0 && request->wLength == 1); uint8_t maxlun = tud_msc_get_maxlun_cb(); - TU_VERIFY(maxlun); + TU_VERIFY(maxlun != 0); maxlun--; // MAX LUN is minus 1 by specs tud_control_xfer(rhport, request, &maxlun, 1); break; @@ -510,7 +516,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if (status != MSC_CSW_STATUS_PASSED) { fail_scsi_op(p_msc, status); - } else if (p_cbw->total_bytes) { + } else if (p_cbw->total_bytes > 0) { if (SCSI_CMD_READ_10 == p_cbw->command[0]) { proc_read10_cmd(p_msc); } else { @@ -547,7 +553,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t TU_LOG_DRV(" SCSI unsupported or failed command\r\n"); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else if (resplen == 0) { - if (p_cbw->total_bytes) { + if (p_cbw->total_bytes > 0) { // 6.7 The 13 Cases: case 4 (Hi > Dn) // TU_LOG_DRV(" SCSI case 4 (Hi > Dn): %lu\r\n", p_cbw->total_bytes); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); @@ -647,7 +653,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } break; - default: break; + default: break; // nothing to do } if (p_msc->stage == MSC_STAGE_STATUS) { @@ -683,9 +689,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } break; - case SCSI_CMD_START_STOP_UNIT: + case SCSI_CMD_START_STOP_UNIT: { resplen = 0; - scsi_start_stop_unit_t const* start_stop = (scsi_start_stop_unit_t const*)scsi_cmd; if (!tud_msc_start_stop_cb(lun, start_stop->power_condition, start_stop->start, start_stop->load_eject)) { // Failed status response @@ -697,10 +702,10 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; + } - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: { resplen = 0; - scsi_prevent_allow_medium_removal_t const* prevent_allow = (scsi_prevent_allow_medium_removal_t const*)scsi_cmd; if (!tud_msc_prevent_allow_medium_removal_cb(lun, prevent_allow->prohibit_removal, prevent_allow->control)) { // Failed status response @@ -712,7 +717,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ } } break; - + } case SCSI_CMD_READ_CAPACITY_10: { uint32_t block_count; @@ -740,8 +745,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_capa10); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_capa10, (size_t) resplen)); } + break; } - break; case SCSI_CMD_READ_FORMAT_CAPACITY: { scsi_read_format_capacity_data_t read_fmt_capa = { @@ -772,8 +777,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(read_fmt_capa); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &read_fmt_capa, (size_t) resplen)); } + break; } - break; case SCSI_CMD_INQUIRY: { scsi_inquiry_resp_t *inquiry_rsp = (scsi_inquiry_resp_t *) buffer; @@ -789,8 +794,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ tud_msc_inquiry_cb(lun, inquiry_rsp->vendor_id, inquiry_rsp->product_id, inquiry_rsp->product_rev); resplen = sizeof(scsi_inquiry_resp_t); } + break; } - break; case SCSI_CMD_MODE_SENSE_6: { scsi_mode_sense6_resp_t mode_resp = { @@ -807,8 +812,8 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = sizeof(mode_resp); TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &mode_resp, (size_t) resplen)); + break; } - break; case SCSI_CMD_REQUEST_SENSE: { scsi_sense_fixed_resp_t sense_rsp = { @@ -828,9 +833,9 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ resplen = tud_msc_request_sense_cb(lun, buffer, (uint16_t)bufsize); // Clear sense data after copy - tud_msc_set_sense(lun, 0, 0, 0); + (void) tud_msc_set_sense(lun, 0, 0, 0); + break; } - break; default: resplen = -1; break; @@ -842,6 +847,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ static void proc_read10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; @@ -849,10 +855,10 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { // remaining bytes capped at class buffer int32_t nbytes = (int32_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); - p_msc->pending_io = 1; + p_msc->pending_io = true; nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_read_io_data(p_msc, nbytes); } } @@ -876,19 +882,19 @@ static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); break; - default: break; + default: break; // nothing to do } } } static void proc_write10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; - bool writable = tud_msc_is_writable_cb(p_cbw->lun); + const bool writable = tud_msc_is_writable_cb(p_cbw->lun); if (!writable) { // Not writable, complete this SCSI op with error // Sense = Write protected - tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); + (void) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); return; } @@ -903,15 +909,16 @@ static void proc_write10_cmd(mscd_interface_t* p_msc) { static void proc_write10_host_data(mscd_interface_t* p_msc, uint32_t xferred_bytes) { msc_cbw_t const* p_cbw = &p_msc->cbw; uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + TU_VERIFY(block_sz != 0, ); // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); uint32_t const offset = p_msc->xferred_len % block_sz; - p_msc->pending_io = 1; + p_msc->pending_io = true; int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->pending_io = 0; + p_msc->pending_io = false; proc_write_io_data(p_msc, xferred_bytes, nbytes); } } @@ -927,7 +934,7 @@ static void proc_write_io_data(mscd_interface_t* p_msc, uint32_t xferred_bytes, fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); break; - default: break; + default: break; // nothing to do } } else { if ((uint32_t)nbytes < xferred_bytes) { diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index eb69ae400..ce2884f2e 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -152,7 +152,7 @@ bool tuh_msc_scsi_command(uint8_t daddr, msc_cbw_t const* cbw, void* data, p_msc->stage = MSC_STAGE_CMD; if (!usbh_edpt_xfer(daddr, p_msc->ep_out, (uint8_t*) &epbuf->cbw, sizeof(msc_cbw_t))) { - usbh_edpt_release(daddr, p_msc->ep_out); + (void) usbh_edpt_release(daddr, p_msc->ep_out); return false; } @@ -191,7 +191,7 @@ bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* respons .cmd_code = SCSI_CMD_INQUIRY, .alloc_length = sizeof(scsi_inquiry_resp_t) }; - memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); + memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -225,7 +225,7 @@ bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void* response, .cmd_code = SCSI_CMD_REQUEST_SENSE, .alloc_length = 18 }; - memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); + memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } @@ -247,7 +247,7 @@ bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void* buffer, uint32_t lba, u .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_read10, cbw.cmd_len); + memcpy(cbw.command, &cmd_read10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } @@ -269,7 +269,7 @@ bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const* buffer, uint32_t .lba = tu_htonl(lba), .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_write10, cbw.cmd_len); + memcpy(cbw.command, &cmd_write10, cbw.cmd_len); //-V1086 return tuh_msc_scsi_command(dev_addr, &cbw, (void*) (uintptr_t) buffer, complete_cb, arg); } @@ -338,8 +338,7 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32 TU_ASSERT(usbh_edpt_xfer(dev_addr, ep_data, p_msc->buffer, (uint16_t) cbw->total_bytes)); break; } - - TU_ATTR_FALLTHROUGH; // fallthrough to status stage + TU_ATTR_FALLTHROUGH; // fallthrough to data stage case MSC_STAGE_DATA: // Status stage @@ -350,20 +349,19 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32 case MSC_STAGE_STATUS: // SCSI op is complete p_msc->stage = MSC_STAGE_IDLE; - - if (p_msc->complete_cb) { + if (p_msc->complete_cb != NULL) { tuh_msc_complete_data_t const cb_data = { .cbw = cbw, .csw = csw, .scsi_data = p_msc->buffer, .user_arg = p_msc->complete_arg }; - p_msc->complete_cb(dev_addr, &cb_data); + (void) p_msc->complete_cb(dev_addr, &cb_data); } break; - // unknown state default: + // unknown state break; } @@ -501,7 +499,7 @@ static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_dat // Capacity response field: Block size and Last LBA are both Big-Endian scsi_read_capacity10_resp_t* resp = (scsi_read_capacity10_resp_t*) (uintptr_t) enum_buf; - p_msc->capacity[cbw->lun].block_count = tu_ntohl(resp->last_lba) + 1; + p_msc->capacity[cbw->lun].block_count = (uint32_t) (tu_ntohl(resp->last_lba) + 1u); p_msc->capacity[cbw->lun].block_size = tu_ntohl(resp->block_size); // Mark enumeration is complete diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index a7bf3e959..905dc239c 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -61,9 +61,9 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); TU_ATTR_ALWAYS_INLINE static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i= 2 diff --git a/src/device/usbd.c b/src/device/usbd.c index 9d0bc0f3f..cf96f050d 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -352,11 +352,13 @@ TU_ATTR_ALWAYS_INLINE static inline usbd_class_driver_t const * get_driver(uint8 if (drvid < _app_driver_count) { // Application drivers driver = &_app_driver[drvid]; - } else if (drvid < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0) { - driver = &_usbd_driver[drvid - _app_driver_count]; - } else { - // nothing to do + } else{ + drvid -= _app_driver_count; + if (drvid < BUILTIN_DRIVER_COUNT) { + driver = &_usbd_driver[drvid]; + } } + return driver; } diff --git a/src/host/hcd.h b/src/host/hcd.h index 4a17326ec..36a7f5da5 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -84,7 +84,7 @@ typedef struct { // FUNC_CALL struct { - void (*func) (void*); + void (*func) (void* param); void* param; }func_call; }; diff --git a/src/host/usbh.c b/src/host/usbh.c index 0330320f8..734024771 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -292,13 +292,17 @@ static uint8_t _app_driver_count = 0; #define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) -static inline usbh_class_driver_t const *get_driver(uint8_t drv_id) { +// virtually joins built-in and application drivers together. +// Application is positioned first to allow overwriting built-in ones. +TU_ATTR_ALWAYS_INLINE static inline usbh_class_driver_t const *get_driver(uint8_t drv_id) { usbh_class_driver_t const *driver = NULL; - - if ( drv_id < _app_driver_count ) { + if (drv_id < _app_driver_count) { driver = &_app_driver[drv_id]; - } else if ( drv_id < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0) { - driver = &usbh_class_drivers[drv_id - _app_driver_count]; + } else { + drv_id -= _app_driver_count; + if (drv_id < BUILTIN_DRIVER_COUNT) { + driver = &usbh_class_drivers[drv_id]; + } } return driver; @@ -318,7 +322,7 @@ TU_ATTR_ALWAYS_INLINE static inline usbh_device_t* get_device(uint8_t dev_addr) } TU_ATTR_ALWAYS_INLINE static inline bool is_hub_addr(uint8_t daddr) { - return (CFG_TUH_HUB > 0) && (daddr > CFG_TUH_DEVICE_MAX); + return (CFG_TUH_HUB > 0) && (daddr > CFG_TUH_DEVICE_MAX); //-V560 } TU_ATTR_ALWAYS_INLINE static inline bool queue_event(hcd_event_t const * event, bool in_isr) { @@ -372,7 +376,8 @@ bool tuh_connected(uint8_t daddr) { return _usbh_data.enumerating_daddr == 0; } else { const usbh_device_t* dev = get_device(daddr); - return dev && dev->connected; + TU_VERIFY(dev != NULL); + return dev->connected; } } @@ -439,8 +444,8 @@ bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { static void clear_device(usbh_device_t* dev) { tu_memclr(dev, sizeof(usbh_device_t)); - memset(dev->itf2drv, TUSB_INDEX_INVALID_8, sizeof(dev->itf2drv)); // invalid mapping - memset(dev->ep2drv , TUSB_INDEX_INVALID_8, sizeof(dev->ep2drv )); // invalid mapping + (void) memset(dev->itf2drv, TUSB_INDEX_INVALID_8, sizeof(dev->itf2drv)); // invalid mapping + (void) memset(dev->ep2drv , TUSB_INDEX_INVALID_8, sizeof(dev->ep2drv )); // invalid mapping } bool tuh_inited(void) { @@ -510,7 +515,7 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Class drivers for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { usbh_class_driver_t const* driver = get_driver(drv_id); - if (driver) { + if (driver != NULL) { TU_LOG_USBH("%s init\r\n", driver->name); driver->init(); } @@ -657,7 +662,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // with enabled driver e.g HID endpoint #if CFG_TUH_API_EDPT_XFER tuh_xfer_cb_t const complete_cb = dev->ep_callback[epnum][ep_dir].complete_cb; - if ( complete_cb ) { + if (complete_cb != NULL) { // re-construct xfer info tuh_xfer_t xfer = { .daddr = event.dev_addr, @@ -675,7 +680,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { { uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; usbh_class_driver_t const* driver = get_driver(drv_id); - if (driver) { + if (driver != NULL) { TU_LOG_USBH(" %s xfer callback\r\n", driver->name); driver->xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); @@ -690,10 +695,13 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { } case USBH_EVENT_FUNC_CALL: - if (event.func_call.func) event.func_call.func(event.func_call.param); + if (event.func_call.func != NULL) { + event.func_call.func(event.func_call.param); + } break; default: + // unknown event break; } @@ -743,7 +751,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { tu_str_std_request[xfer->setup->bRequest] : "Class Request"); TU_LOG_BUF_USBH(xfer->setup, 8); - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { TU_ASSERT(usbh_setup_send(daddr, (uint8_t const *) &_usbh_epbuf.request)); }else { // blocking if complete callback is not provided @@ -795,7 +803,7 @@ static void _control_xfer_complete(uint8_t daddr, xfer_result_t result) { _control_set_xfer_stage(CONTROL_STAGE_IDLE); - if (xfer_temp.complete_cb) { + if (xfer_temp.complete_cb != NULL) { xfer_temp.complete_cb(&xfer_temp); } } @@ -834,7 +842,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t case XFER_RESULT_SUCCESS: switch(ctrl_info->stage) { case CONTROL_STAGE_SETUP: - if (request->wLength) { + if (request->wLength > 0) { // DATA stage: initial data toggle is always 1 _control_set_xfer_stage(CONTROL_STAGE_DATA); const uint8_t ep_data = tu_edpt_addr(0, request->bmRequestType_bit.direction); @@ -844,7 +852,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t TU_ATTR_FALLTHROUGH; case CONTROL_STAGE_DATA: { - if (request->wLength) { + if (request->wLength > 0) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, daddr); TU_LOG_MEM_USBH(ctrl_info->buffer, xferred_bytes, 2); } @@ -1084,7 +1092,7 @@ bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { bool tuh_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info) { usbh_device_t const* dev = get_device(daddr); - if (dev) { + if (dev != NULL) { *bus_info = dev->bus_info; } else { *bus_info = _usbh_data.dev0_bus; @@ -1109,7 +1117,9 @@ TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) } break; - default: break; + default: + // nothing to do + break; } queue_event(event, in_isr); @@ -1423,16 +1433,13 @@ static bool enum_new_device(hcd_event_t* event) { // wait until device connection is stable TODO non blocking tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); - // clear roothub debouncing delay - if (dev0_bus->hub_addr == 0) { - _usbh_data.attach_debouncing_bm &= (uint8_t) ~TU_BIT(dev0_bus->rhport); - } - if (dev0_bus->hub_addr == 0) { // connected directly to roothub // USB bus not active and frame number is not available yet. // need to depend on tusb_time_millis_api() TODO non blocking + _usbh_data.attach_debouncing_bm &= (uint8_t) ~TU_BIT(dev0_bus->rhport); // clear roothub debouncing delay + if (!hcd_port_connect_status(dev0_bus->rhport)) { TU_LOG_USBH("Device unplugged while debouncing\r\n"); enum_full_complete(); @@ -1503,7 +1510,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { usbh_device_t* dev = get_device(daddr); tuh_bus_info_t* dev0_bus = &_usbh_data.dev0_bus; if (daddr > 0) { - TU_ASSERT(dev,); + TU_ASSERT(dev != NULL,); } uint16_t langid = 0x0409; // default is English @@ -1619,17 +1626,18 @@ static void process_enumeration(tuh_xfer_t* xfer) { case ENUM_GET_STRING_LANGUAGE_ID_LEN: { // save the received device descriptor tusb_desc_device_t const *desc_device = (tusb_desc_device_t const *) _usbh_epbuf.ctrl; - dev->bcdUSB = desc_device->bcdUSB; - dev->bDeviceClass = desc_device->bDeviceClass; - dev->bDeviceSubClass = desc_device->bDeviceSubClass; - dev->bDeviceProtocol = desc_device->bDeviceProtocol; - dev->bMaxPacketSize0 = desc_device->bMaxPacketSize0; - dev->idVendor = desc_device->idVendor; - dev->idProduct = desc_device->idProduct; - dev->bcdDevice = desc_device->bcdDevice; - dev->iManufacturer = desc_device->iManufacturer; - dev->iProduct = desc_device->iProduct; - dev->iSerialNumber = desc_device->iSerialNumber; + + dev->bcdUSB = desc_device->bcdUSB; + dev->bDeviceClass = desc_device->bDeviceClass; + dev->bDeviceSubClass = desc_device->bDeviceSubClass; + dev->bDeviceProtocol = desc_device->bDeviceProtocol; + dev->bMaxPacketSize0 = desc_device->bMaxPacketSize0; + dev->idVendor = desc_device->idVendor; + dev->idProduct = desc_device->idProduct; + dev->bcdDevice = desc_device->bcdDevice; + dev->iManufacturer = desc_device->iManufacturer; + dev->iProduct = desc_device->iProduct; + dev->iSerialNumber = desc_device->iSerialNumber; dev->bNumConfigurations = desc_device->bNumConfigurations; tuh_enum_descriptor_device_cb(daddr, desc_device); // callback @@ -1654,9 +1662,8 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iManufacturer, langid, _usbh_epbuf.ctrl, 2, process_enumeration, ENUM_GET_STRING_MANUFACTURER); break; - }else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } case ENUM_GET_STRING_MANUFACTURER: { @@ -1666,22 +1673,21 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iManufacturer, langid, _usbh_epbuf.ctrl, str_len, process_enumeration, ENUM_GET_STRING_PRODUCT_LEN); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } - case ENUM_GET_STRING_PRODUCT_LEN: + case ENUM_GET_STRING_PRODUCT_LEN: { if (dev->iProduct != 0) { if (state == ENUM_GET_STRING_PRODUCT_LEN) { langid = tu_le16toh(xfer->setup->wIndex); // get langid from previous setup packet if not fall through } - tuh_descriptor_get_string(daddr, dev->iProduct, langid, _usbh_epbuf.ctrl, 2, - process_enumeration, ENUM_GET_STRING_PRODUCT); + tuh_descriptor_get_string( + daddr, dev->iProduct, langid, _usbh_epbuf.ctrl, 2, process_enumeration, ENUM_GET_STRING_PRODUCT); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; + } case ENUM_GET_STRING_PRODUCT: { if (dev->iProduct != 0) { @@ -1690,22 +1696,21 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iProduct, langid, _usbh_epbuf.ctrl, str_len, process_enumeration, ENUM_GET_STRING_SERIAL_LEN); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } - case ENUM_GET_STRING_SERIAL_LEN: + case ENUM_GET_STRING_SERIAL_LEN: { if (dev->iSerialNumber != 0) { if (state == ENUM_GET_STRING_SERIAL_LEN) { langid = tu_le16toh(xfer->setup->wIndex); // get langid from previous setup packet if not fall through } - tuh_descriptor_get_string(daddr, dev->iSerialNumber, langid, _usbh_epbuf.ctrl, 2, - process_enumeration, ENUM_GET_STRING_SERIAL); + tuh_descriptor_get_string( + daddr, dev->iSerialNumber, langid, _usbh_epbuf.ctrl, 2, process_enumeration, ENUM_GET_STRING_SERIAL); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; + } case ENUM_GET_STRING_SERIAL: { if (dev->iSerialNumber != 0) { @@ -1714,9 +1719,8 @@ static void process_enumeration(tuh_xfer_t* xfer) { tuh_descriptor_get_string(daddr, dev->iSerialNumber, langid, _usbh_epbuf.ctrl, str_len, process_enumeration, ENUM_GET_9BYTE_CONFIG_DESC); break; - } else { - TU_ATTR_FALLTHROUGH; } + TU_ATTR_FALLTHROUGH; } case ENUM_GET_9BYTE_CONFIG_DESC: { diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index ace5907d7..f5385071a 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -81,8 +81,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { (void) in_isr; - sem_release(sem_hdl); - return true; + return sem_release(sem_hdl); } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { @@ -139,7 +138,7 @@ typedef osal_queue_def_t* osal_queue_t; TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { critical_section_init(&qdef->critsec); - tu_fifo_clear(&qdef->ff); + (void) tu_fifo_clear(&qdef->ff); return (osal_queue_t) qdef; } -- cgit v1.3.1 From 7f173ab5ed6a80a5fd6780779fe63fb97d2be0e9 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 8 Nov 2025 15:54:02 +0700 Subject: fix more alerts --- .PVS-Studio/.pvsconfig | 1 + .clang-format | 1 + .github/workflows/static_analysis.yml | 3 +- examples/device/cdc_uac2/src/cdc_app.c | 2 +- examples/device/net_lwip_webserver/src/arch/cc.h | 6 +- examples/host/cdc_msc_hid/src/cdc_app.c | 2 +- src/class/audio/audio_device.c | 35 +- src/class/cdc/cdc_host.c | 81 +++-- src/class/msc/msc_host.c | 5 +- src/common/tusb_debug.h | 16 +- src/common/tusb_fifo.c | 414 ++++++++++------------- src/common/tusb_fifo.h | 25 +- src/common/tusb_private.h | 21 +- src/tusb.c | 38 ++- 14 files changed, 314 insertions(+), 336 deletions(-) (limited to 'examples') diff --git a/.PVS-Studio/.pvsconfig b/.PVS-Studio/.pvsconfig index d8654b077..c9e60c996 100644 --- a/.PVS-Studio/.pvsconfig +++ b/.PVS-Studio/.pvsconfig @@ -10,6 +10,7 @@ //-V::2520 [MISRA-C-16.3] Every switch-clause should be terminated by an unconditional 'break' statement //-V:memcpy:2547 [MISRA-C-17.7] The return value of non-void function 'memcpy' should be used. //-V:memmove:2547 [MISRA-C-17.7] The return value of non-void function 'memmove' should be used. +//-V:printf:2547 [MISRA-C-17.7] //-V::2584::{gintsts} dwc2 //-V::2600 [MISRA-C-21.6] The function with the 'printf' name should not be used. //+V2614 DISABLE_LENGHT_LIMIT_CHECK:YES diff --git a/.clang-format b/.clang-format index c7d769172..907dd7cdd 100644 --- a/.clang-format +++ b/.clang-format @@ -87,5 +87,6 @@ SpacesInAngles: false SpacesInConditionalStatement: false SpacesInCStyleCastParentheses: false SpacesInParentheses: false +SortIncludes: false TabWidth: 2 ... diff --git a/.github/workflows/static_analysis.yml b/.github/workflows/static_analysis.yml index 227f5e103..a89cdc279 100644 --- a/.github/workflows/static_analysis.yml +++ b/.github/workflows/static_analysis.yml @@ -118,13 +118,14 @@ jobs: sudo apt update sudo apt install pvs-studio pvs-studio-analyzer credentials ${{ secrets.PVS_STUDIO_CREDENTIALS }} + pvs-studio-analyzer --version - name: Analyze run: | mkdir -p build cmake examples -B build -G Ninja -DBOARD=${{ matrix.board }} -DCMAKE_BUILD_TYPE=MinSizeRel cmake --build build - pvs-studio-analyzer analyze -R .PVS-Studio/.pvsconfig -f build/compile_commands.json --exclude-path hw/mcu/ --exclude-path lib/ -j + pvs-studio-analyzer analyze -f build/compile_commands.json -R .PVS-Studio/.pvsconfig -j4 --security-related-issues --misra-cpp-version 2008 --misra-c-version 2023 --use-old-parser -e lib/ -e hw/mcu/ -e */iar/cxarm/ -e pico-sdk/ plog-converter -t sarif -o pvs-studio-${{ matrix.board }}.sarif PVS-Studio.log - name: Upload SARIF diff --git a/examples/device/cdc_uac2/src/cdc_app.c b/examples/device/cdc_uac2/src/cdc_app.c index e3ad8a9ac..6d18a0e69 100644 --- a/examples/device/cdc_uac2/src/cdc_app.c +++ b/examples/device/cdc_uac2/src/cdc_app.c @@ -48,7 +48,7 @@ void tud_cdc_rx_cb(uint8_t itf) { // connected() check for DTR bit // Most but not all terminal client set this when making connection if (tud_cdc_connected()) { - if (tud_cdc_available()) { + if (tud_cdc_available() > 0) { count = tud_cdc_n_read(itf, buf, sizeof(buf)); (void) count; diff --git a/examples/device/net_lwip_webserver/src/arch/cc.h b/examples/device/net_lwip_webserver/src/arch/cc.h index 9f30b91cb..c3fc12dda 100644 --- a/examples/device/net_lwip_webserver/src/arch/cc.h +++ b/examples/device/net_lwip_webserver/src/arch/cc.h @@ -29,8 +29,8 @@ * Author: Adam Dunkels * */ -#ifndef __CC_H__ -#define __CC_H__ +#ifndef CC_H__ +#define CC_H__ //#include "cpu.h" @@ -72,4 +72,4 @@ typedef int sys_prot_t; #define LWIP_PLATFORM_ASSERT(x) do { if(!(x)) while(1); } while(0) -#endif /* __CC_H__ */ +#endif /* CC_H__ */ diff --git a/examples/host/cdc_msc_hid/src/cdc_app.c b/examples/host/cdc_msc_hid/src/cdc_app.c index d3daedffc..4c2c5e807 100644 --- a/examples/host/cdc_msc_hid/src/cdc_app.c +++ b/examples/host/cdc_msc_hid/src/cdc_app.c @@ -51,7 +51,7 @@ void cdc_app_task(void) { for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) { if (tuh_cdc_mounted(idx)) { // console --> cdc interfaces - if (count) { + if (count > 0) { tuh_cdc_write(idx, buf, count); tuh_cdc_write_flush(idx); } diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index d47d87a69..f074b7d02 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -503,7 +503,7 @@ static bool audiod_rx_xfer_isr(uint8_t rhport, audiod_function_t* audio, uint16_ #if USE_LINEAR_BUFFER_RX // Data currently is in linear buffer, copy into EP OUT FIFO - TU_VERIFY(tu_fifo_write_n(&audio->ep_out_ff, audio->lin_buf_out, n_bytes_received)); + TU_VERIFY(0 < tu_fifo_write_n(&audio->ep_out_ff, audio->lin_buf_out, n_bytes_received)); // Schedule for next receive TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); @@ -672,8 +672,12 @@ uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { // The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. // This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot // (audio slot = channel count samples). - if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; - if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; + if (feedback > audio->feedback.max_value) { + feedback = audio->feedback.max_value; + } + if (feedback < audio->feedback.min_value) { + feedback = audio->feedback.min_value; + } tud_audio_n_fb_set(func_id, feedback); @@ -714,7 +718,6 @@ void audiod_init(void) { // Initialize IN EP FIFO if required #if CFG_TUD_AUDIO_ENABLE_EP_IN - switch (i) { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 case 0: @@ -883,9 +886,11 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint || tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { break; } else if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceSubClass == AUDIO_SUBCLASS_STREAMING) { - if (_audiod_fct[i].p_desc_as == 0) { + if (_audiod_fct[i].p_desc_as == NULL) { _audiod_fct[i].p_desc_as = p_desc; } + } else { + // nothing to do } total_len += p_desc[0]; p_desc = tu_desc_next(p_desc); @@ -957,19 +962,19 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint } #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (ep_in) { + if (ep_in != 0) { usbd_edpt_iso_alloc(rhport, ep_in, ep_in_size); } #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT - if (ep_out) { + if (ep_out != 0) { usbd_edpt_iso_alloc(rhport, ep_out, ep_out_size); } #endif #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if (ep_fb) { + if (ep_fb != 0) { usbd_edpt_iso_alloc(rhport, ep_fb, 4); } #endif @@ -998,6 +1003,8 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { _audiod_fct[i].bclock_id_tx = p_desc[8]; } + } else { + // nothing to do } p_desc = tu_desc_next(p_desc); } @@ -1458,6 +1465,8 @@ bool audiod_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_ return audiod_control_request(rhport, request); } else if (stage == CONTROL_STAGE_DATA) { return audiod_control_complete(rhport, request); + } else { + // nothing to do } return true; @@ -1633,8 +1642,12 @@ static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_n feedback = audio->feedback.compute.fifo_count.nom_value - (ff_lvl - ff_thr) * rate[1]; } - if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; - if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; + if (feedback > audio->feedback.max_value) { + feedback = audio->feedback.max_value; + } + if (feedback < audio->feedback.min_value) { + feedback = audio->feedback.min_value; + } audio->feedback.value = feedback; } @@ -1754,7 +1767,7 @@ static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t * static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id) { uint8_t i; for (i = 0; i < CFG_TUD_AUDIO; i++) { - if (_audiod_fct[i].p_desc) { + if (_audiod_fct[i].p_desc != NULL) { // Get pointer at beginning and end uint8_t const *p_desc = _audiod_fct[i].p_desc; uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length; diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 3fc6a9adf..7fdf0a7b9 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -602,7 +602,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, p_cdc->requested_line.coding = *line_coding; p_cdc->user_complete_cb = complete_cb; - if (driver->set_line_coding) { + if (driver->set_line_coding != NULL) { // driver support set_line_coding request TU_VERIFY(driver->set_line_coding(p_cdc, complete_cb ? cdch_internal_control_complete : NULL, user_data)); @@ -611,7 +611,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, } } else { // driver does not support set_line_coding and need 2 stage to set baudrate and data format separately - if (complete_cb) { + if (complete_cb != NULL) { // non-blocking TU_VERIFY(driver->set_baudrate(p_cdc, cdch_set_line_coding_stage1_baudrate_complete, user_data)); } else { @@ -619,7 +619,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, xfer_result_t result = XFER_RESULT_INVALID; TU_VERIFY(driver->set_baudrate(p_cdc, NULL, (uintptr_t) &result)); - if (user_data) { + if (user_data != 0) { *((xfer_result_t *) user_data) = result; } TU_VERIFY(result == XFER_RESULT_SUCCESS); @@ -627,7 +627,7 @@ bool tuh_cdc_set_line_coding(uint8_t idx, cdc_line_coding_t const *line_coding, result = XFER_RESULT_INVALID; TU_VERIFY(driver->set_data_format(p_cdc, NULL, (uintptr_t) &result)); - if (user_data) { + if (user_data != 0) { *((xfer_result_t *) user_data) = result; } TU_VERIFY(result == XFER_RESULT_SUCCESS); @@ -777,6 +777,8 @@ bool cdch_open(uint8_t rhport, uint8_t daddr, tusb_desc_interface_t const *itf_d } } } + } else { + // not supported class } return false; @@ -894,7 +896,7 @@ static void cdch_internal_control_complete(tuh_xfer_t *xfer) { // Invoke application callback xfer->complete_cb = p_cdc->user_complete_cb; - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { xfer->complete_cb(xfer); } } @@ -910,7 +912,7 @@ static void cdch_set_line_coding_stage1_baudrate_complete(tuh_xfer_t *xfer) { TU_ASSERT(driver->set_data_format(p_cdc, cdch_set_line_coding_stage2_data_format_complete, xfer->user_data),); } else { xfer->complete_cb = p_cdc->user_complete_cb; - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { xfer->complete_cb(xfer); } } @@ -926,7 +928,7 @@ static void cdch_set_line_coding_stage2_data_format_complete(tuh_xfer_t *xfer) { } xfer->complete_cb = p_cdc->user_complete_cb; - if (xfer->complete_cb) { + if (xfer->complete_cb != NULL) { xfer->complete_cb(xfer); } } @@ -950,12 +952,12 @@ static void acm_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t *x break; default: - break; + break; // unknown request } } static bool acm_set_control_line_state(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_VERIFY(p_cdc->acm.capability.support_line_request); + TU_VERIFY(p_cdc->acm.capability.support_line_request != 0); const tusb_control_request_t request = { .bmRequestType_bit = { @@ -982,7 +984,7 @@ static bool acm_set_control_line_state(cdch_interface_t *p_cdc, tuh_xfer_cb_t co } static bool acm_set_line_coding(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_VERIFY(p_cdc->acm.capability.support_line_request); + TU_VERIFY(p_cdc->acm.capability.support_line_request != 0); TU_VERIFY((p_cdc->requested_line.coding.data_bits >= 5 && p_cdc->requested_line.coding.data_bits <= 8) || p_cdc->requested_line.coding.data_bits == 16); @@ -1167,10 +1169,10 @@ static bool ftdi_set_data_format(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete static bool ftdi_set_baudrate(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { uint32_t index_value = ftdi_get_divisor(p_cdc); - TU_VERIFY(index_value); + TU_VERIFY(index_value != 0); uint16_t value = (uint16_t) index_value; uint16_t index = (uint16_t) (index_value >> 16); - if (p_cdc->ftdi.channel) { + if (p_cdc->ftdi.channel != 0) { index = (uint16_t) ((index << 8) | p_cdc->ftdi.channel); } @@ -1372,6 +1374,8 @@ static uint32_t ftdi_232bm_baud_base_to_divisor(uint32_t baud, uint32_t base) { divisor = 0; } else if (divisor == 0x4001) /* 1.5 */ { divisor = 1; + } else { + // nothing to do } return divisor; } @@ -1395,12 +1399,13 @@ static uint32_t ftdi_2232h_baud_base_to_divisor(uint32_t baud, uint32_t base) { divisor = 0; } else if (divisor == 0x4001) /* 1.5 */ { divisor = 1; + } else { + // nothing to do } - /* - * Set this bit to turn off a divide by 2.5 on baud rate generator + + /* Set this bit to turn off a divide by 2.5 on baud rate generator * This enables baud rates up to 12Mbaud but cannot reach below 1200 - * baud with this bit set - */ + * baud with this bit set */ divisor |= 0x00020000; return divisor; } @@ -1412,7 +1417,7 @@ static inline uint32_t ftdi_2232h_baud_to_divisor(uint32_t baud) { static inline uint32_t ftdi_get_divisor(cdch_interface_t *p_cdc) { uint32_t baud = p_cdc->requested_line.coding.bit_rate; uint32_t div_value = 0; - TU_VERIFY(baud); + TU_VERIFY(baud != 0); switch (p_cdc->ftdi.chip_type) { case FTDI_UNKNOWN: @@ -1552,7 +1557,8 @@ static void cp210x_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t p_cdc->line.coding.bit_rate = p_cdc->requested_line.coding.bit_rate; break; - default: break; + default: + break; // unsupported request } } @@ -1713,7 +1719,8 @@ static void ch34x_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t p_cdc->line.coding.data_bits = p_cdc->requested_line.coding.data_bits; break; - default: break; + default: + break; // unsupported } break; @@ -1721,19 +1728,20 @@ static void ch34x_internal_control_complete(cdch_interface_t *p_cdc, tuh_xfer_t p_cdc->line.control_state = p_cdc->requested_line.control_state; break; - default: break; + default: + break; // unsupported request } } static bool ch34x_set_data_format(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { const uint8_t lcr = ch34x_get_lcr(p_cdc); - TU_VERIFY(lcr); + TU_VERIFY(lcr > 0); return ch34x_write_reg(p_cdc, CH32X_REG16_LCR2_LCR, lcr, complete_cb, user_data); } static bool ch34x_set_baudrate(cdch_interface_t *p_cdc, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { const uint16_t div_ps = ch34x_get_divisor_prescaler(p_cdc); - TU_VERIFY(div_ps); + TU_VERIFY(div_ps > 0); return ch34x_write_reg(p_cdc, CH34X_REG16_DIVISOR_PRESCALER, div_ps, complete_cb, user_data); } @@ -1916,7 +1924,8 @@ static uint8_t ch34x_get_lcr(cdch_interface_t *p_cdc) { lcr |= CH34X_LCR_ENABLE_PAR | CH34X_LCR_MARK_SPACE | CH34X_LCR_PAR_EVEN; break; - default: break; + default: + break; // invalid parity } // 1.5 stop bits not supported @@ -1999,13 +2008,15 @@ static inline bool pl2303_supports_hx_status(cdch_interface_t *p_cdc, tuh_xfer_c // return pl2303_set_request(p_cdc, PL2303_BREAK_REQUEST, PL2303_BREAK_REQUEST_TYPE, state, 0, NULL, 0); //} -static inline int pl2303_clear_halt(cdch_interface_t *p_cdc, uint8_t endp, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { +static inline bool +pl2303_clear_halt(cdch_interface_t *p_cdc, uint8_t endp, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { /* we don't care if it wasn't halted first. in fact some devices * (like some ibmcam model 1 units) seem to expect hosts to make * this request for iso endpoints, which can't halt! */ - return pl2303_set_request(p_cdc, TUSB_REQ_CLEAR_FEATURE, PL2303_CLEAR_HALT_REQUEST_TYPE, TUSB_REQ_FEATURE_EDPT_HALT, endp, - NULL, 0, complete_cb, user_data); + return pl2303_set_request( + p_cdc, TUSB_REQ_CLEAR_FEATURE, PL2303_CLEAR_HALT_REQUEST_TYPE, TUSB_REQ_FEATURE_EDPT_HALT, endp, NULL, 0, + complete_cb, user_data); } //------------- Driver API -------------// @@ -2130,10 +2141,9 @@ static bool pl2303_process_set_config(cdch_interface_t *p_cdc, tuh_xfer_t *xfer) if (type == PL2303_TYPE_NEED_SUPPORTS_HX_STATUS) { TU_ASSERT(pl2303_supports_hx_status(p_cdc, cdch_process_set_config, CONFIG_PL2303_READ1)); break; - } else { - // no transfer triggered and continue with CONFIG_PL2303_READ1 - TU_ATTR_FALLTHROUGH; } + // no transfer triggered and continue with CONFIG_PL2303_READ1 + TU_ATTR_FALLTHROUGH; case CONFIG_PL2303_READ1: // get supports_hx_status, type and quirks (step 2), do special read @@ -2378,10 +2388,12 @@ static pl2303_type_t pl2303_detect_type(cdch_interface_t *p_cdc, uint8_t step) { return PL2303_TYPE_HXN; default: - break; + break; // unknown device } break; - default: break; + + default: + break; // unknown device } TU_LOG_CDC(p_cdc, "unknown device type bcdUSB = 0x%04x", desc_dev.bcdUSB); @@ -2443,8 +2455,9 @@ static uint32_t pl2303_encode_baud_rate_divisor(uint8_t buf[PL2303_LINE_CODING_B */ baseline = 12000000 * 32; mantissa = baseline / baud; - if (mantissa == 0) + if (mantissa == 0) { mantissa = 1; /* Avoid dividing by zero if baud > 32 * 12M. */ + } exponent = 0; while (mantissa >= 512) { if (exponent < 7) { @@ -2516,7 +2529,7 @@ static bool pl2303_encode_baud_rate(cdch_interface_t *p_cdc, uint8_t buf[PL2303_ * Use direct method for supported baud rates, otherwise use divisors. * Newer chip types do not support divisor encoding. */ - if (type_data->no_divisors) { + if (type_data->no_divisors != 0) { baud_sup = baud; } else { baud_sup = pl2303_get_supported_baud_rate(baud); @@ -2524,7 +2537,7 @@ static bool pl2303_encode_baud_rate(cdch_interface_t *p_cdc, uint8_t buf[PL2303_ if (baud == baud_sup) { baud = pl2303_encode_baud_rate_direct(buf, baud); - } else if (type_data->alt_divisors) { + } else if (type_data->alt_divisors != 0) { baud = pl2303_encode_baud_rate_divisor_alt(buf, baud); } else { baud = pl2303_encode_baud_rate_divisor(buf, baud); diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index ce2884f2e..daff345c5 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -123,7 +123,10 @@ bool tuh_msc_mounted(uint8_t dev_addr) { bool tuh_msc_ready(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); - return p_msc->mounted && !usbh_edpt_busy(dev_addr, p_msc->ep_in) && !usbh_edpt_busy(dev_addr, p_msc->ep_out); + TU_VERIFY(p_msc->mounted); + const bool epin_busy = usbh_edpt_busy(dev_addr, p_msc->ep_in); + const bool epout_busy = usbh_edpt_busy(dev_addr, p_msc->ep_out); + return !epin_busy && !epout_busy; } //--------------------------------------------------------------------+ diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 08117283f..e0e09f5ce 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -56,14 +56,14 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); #define tu_printf CFG_TUSB_DEBUG_PRINTF #else #include - #define tu_printf printf + #define tu_printf(...) (void) printf(__VA_ARGS__) #endif TU_ATTR_ALWAYS_INLINE static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i= 2 diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 3b8920c01..419046b8b 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -28,7 +28,7 @@ #include "osal/osal.h" #include "tusb_fifo.h" -#define TU_FIFO_DBG 0 +#define TU_FIFO_DBG 0 // Suppress IAR warning // Warning[Pa082]: undefined behavior: the order of volatile accesses is undefined in this statement @@ -39,13 +39,13 @@ #if OSAL_MUTEX_REQUIRED TU_ATTR_ALWAYS_INLINE static inline void _ff_lock(osal_mutex_t mutex) { - if (mutex) { + if (mutex != NULL) { osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); } } TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) { - if (mutex) { + if (mutex != NULL) { osal_mutex_unlock(mutex); } } @@ -62,14 +62,13 @@ TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) { * copy data to and from USB hardware FIFOs as needed for e.g. STM32s and others */ typedef enum { - TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode + TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode #ifdef TUP_MEM_CONST_ADDR TU_FIFO_COPY_CST_FULL_WORDS, ///< Copy from/to a constant source/destination address - required for e.g. STM32 to write into USB hardware FIFO #endif } tu_fifo_copy_mode_t; -bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable) -{ +bool tu_fifo_config(tu_fifo_t *f, void *buffer, uint16_t depth, uint16_t item_size, bool overwritable) { // Limit index space to 2*depth - this allows for a fast "modulo" calculation // but limits the maximum depth to 2^16/2 = 2^15 and buffer overflows are detectable // only if overflow happens once (important for unsupervised DMA applications) @@ -80,9 +79,9 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si _ff_lock(f->mutex_wr); _ff_lock(f->mutex_rd); - f->buffer = (uint8_t*) buffer; + f->buffer = (uint8_t *)buffer; f->depth = depth; - f->item_size = (uint16_t) (item_size & 0x7FFF); + f->item_size = (uint16_t)(item_size & 0x7FFF); f->overwritable = overwritable; f->rd_idx = 0; f->wr_idx = 0; @@ -101,18 +100,18 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Intended to be used to read from hardware USB FIFO in e.g. STM32 where all data is read from a constant address // Code adapted from dcd_synopsys.c // TODO generalize with configurable 1 byte or 4 byte each read -static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t len) { - volatile const uint32_t * reg_rx = (volatile const uint32_t *) app_buf; +static void _ff_push_const_addr(uint8_t *ff_buf, const void *app_buf, uint16_t len) { + const volatile uint32_t *reg_rx = (volatile const uint32_t *)app_buf; // Reading full available 32 bit words from const app address uint16_t full_words = len >> 2; - while(full_words--) { + while (full_words--) { tu_unaligned_write32(ff_buf, *reg_rx); ff_buf += 4; } // Read the remaining 1-3 bytes from const app address - uint8_t const bytes_rem = len & 0x03; + const uint8_t bytes_rem = len & 0x03; if (bytes_rem) { uint32_t tmp32 = *reg_rx; memcpy(ff_buf, &tmp32, bytes_rem); @@ -121,18 +120,18 @@ static void _ff_push_const_addr(uint8_t * ff_buf, const void * app_buf, uint16_t // Intended to be used to write to hardware USB FIFO in e.g. STM32 // where all data is written to a constant address in full word copies -static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t len) { - volatile uint32_t * reg_tx = (volatile uint32_t *) app_buf; +static void _ff_pull_const_addr(void *app_buf, const uint8_t *ff_buf, uint16_t len) { + volatile uint32_t *reg_tx = (volatile uint32_t *)app_buf; // Write full available 32 bit words to const address uint16_t full_words = len >> 2; - while(full_words--) { + while (full_words--) { *reg_tx = tu_unaligned_read32(ff_buf); ff_buf += 4; } // Write the remaining 1-3 bytes into const address - uint8_t const bytes_rem = len & 0x03; + const uint8_t bytes_rem = len & 0x03; if (bytes_rem) { uint32_t tmp32 = 0; memcpy(&tmp32, ff_buf, bytes_rem); @@ -143,32 +142,27 @@ static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t #endif // send one item to fifo WITHOUT updating write pointer -static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) { +static inline void _ff_push(tu_fifo_t *f, const void *app_buf, uint16_t rel) { memcpy(f->buffer + (rel * f->item_size), app_buf, f->item_size); } // send n items to fifo WITHOUT updating write pointer -static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t wr_ptr, tu_fifo_copy_mode_t copy_mode) -{ - uint16_t const lin_count = f->depth - wr_ptr; - uint16_t const wrap_count = n - lin_count; +static void _ff_push_n(tu_fifo_t *f, const void *app_buf, uint16_t n, uint16_t wr_ptr, tu_fifo_copy_mode_t copy_mode) { + const uint16_t lin_count = f->depth - wr_ptr; + const uint16_t wrap_count = n - lin_count; - uint16_t lin_bytes = lin_count * f->item_size; + uint16_t lin_bytes = lin_count * f->item_size; uint16_t wrap_bytes = wrap_count * f->item_size; // current buffer of fifo - uint8_t* ff_buf = f->buffer + (wr_ptr * f->item_size); + uint8_t *ff_buf = f->buffer + (wr_ptr * f->item_size); - switch (copy_mode) - { + switch (copy_mode) { case TU_FIFO_COPY_INC: - if(n <= lin_count) - { + if (n <= lin_count) { // Linear only - memcpy(ff_buf, app_buf, n*f->item_size); - } - else - { + memcpy(ff_buf, app_buf, n * f->item_size); + } else { // Wrap around // Write data to linear part of buffer @@ -176,19 +170,17 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t // Write data wrapped around // TU_ASSERT(nWrap_bytes <= f->depth, ); - memcpy(f->buffer, ((uint8_t const*) app_buf) + lin_bytes, wrap_bytes); + memcpy(f->buffer, ((const uint8_t *)app_buf) + lin_bytes, wrap_bytes); } break; + #ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: // Intended for hardware buffers from which it can be read word by word only - if(n <= lin_count) - { + if (n <= lin_count) { // Linear only - _ff_push_const_addr(ff_buf, app_buf, n*f->item_size); - } - else - { + _ff_push_const_addr(ff_buf, app_buf, n * f->item_size); + } else { // Wrap around case // Write full words to linear part of buffer @@ -198,83 +190,80 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t // There could be odd 1-3 bytes before the wrap-around boundary uint8_t rem = lin_bytes & 0x03; - if (rem > 0) - { - volatile const uint32_t * rx_fifo = (volatile const uint32_t *) app_buf; + if (rem > 0) { + const volatile uint32_t *rx_fifo = (volatile const uint32_t *)app_buf; - uint8_t remrem = (uint8_t) tu_min16(wrap_bytes, 4-rem); + uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, 4 - rem); wrap_bytes -= remrem; - uint32_t tmp32 = *rx_fifo; - uint8_t * src_u8 = ((uint8_t *) &tmp32); + uint32_t tmp32 = *rx_fifo; + uint8_t *src_u8 = ((uint8_t *)&tmp32); // Write 1-3 bytes before wrapped boundary - while(rem--) *ff_buf++ = *src_u8++; + while (rem--) { + *ff_buf++ = *src_u8++; + } // Read more bytes to beginning to complete a word ff_buf = f->buffer; - while(remrem--) *ff_buf++ = *src_u8++; - } - else - { + while (remrem--) { + *ff_buf++ = *src_u8++; + } + } else { ff_buf = f->buffer; // wrap around to beginning } // Write data wrapped part - if (wrap_bytes > 0) _ff_push_const_addr(ff_buf, app_buf, wrap_bytes); + if (wrap_bytes > 0) { + _ff_push_const_addr(ff_buf, app_buf, wrap_bytes); + } } break; #endif - default: break; + + default: + break; // unknown mode } } // get one item from fifo WITHOUT updating read pointer -static inline void _ff_pull(tu_fifo_t* f, void * app_buf, uint16_t rel) -{ +static inline void _ff_pull(tu_fifo_t *f, void *app_buf, uint16_t rel) { memcpy(app_buf, f->buffer + (rel * f->item_size), f->item_size); } // get n items from fifo WITHOUT updating read pointer -static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, tu_fifo_copy_mode_t copy_mode) -{ - uint16_t const lin_count = f->depth - rd_ptr; - uint16_t const wrap_count = n - lin_count; // only used if wrapped +static void _ff_pull_n(tu_fifo_t *f, void *app_buf, uint16_t n, uint16_t rd_ptr, tu_fifo_copy_mode_t copy_mode) { + const uint16_t lin_count = f->depth - rd_ptr; + const uint16_t wrap_count = n - lin_count; // only used if wrapped - uint16_t lin_bytes = lin_count * f->item_size; + uint16_t lin_bytes = lin_count * f->item_size; uint16_t wrap_bytes = wrap_count * f->item_size; // current buffer of fifo - uint8_t* ff_buf = f->buffer + (rd_ptr * f->item_size); + uint8_t *ff_buf = f->buffer + (rd_ptr * f->item_size); - switch (copy_mode) - { + switch (copy_mode) { case TU_FIFO_COPY_INC: - if ( n <= lin_count ) - { + if (n <= lin_count) { // Linear only - memcpy(app_buf, ff_buf, n*f->item_size); - } - else - { + memcpy(app_buf, ff_buf, n * f->item_size); + } else { // Wrap around // Read data from linear part of buffer memcpy(app_buf, ff_buf, lin_bytes); // Read data wrapped part - memcpy((uint8_t*) app_buf + lin_bytes, f->buffer, wrap_bytes); + memcpy((uint8_t *)app_buf + lin_bytes, f->buffer, wrap_bytes); } - break; + break; + #ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: - if ( n <= lin_count ) - { + if (n <= lin_count) { // Linear only - _ff_pull_const_addr(app_buf, ff_buf, n*f->item_size); - } - else - { + _ff_pull_const_addr(app_buf, ff_buf, n * f->item_size); + } else { // Wrap around case // Read full words from linear part of buffer @@ -284,36 +273,41 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, // There could be odd 1-3 bytes before the wrap-around boundary uint8_t rem = lin_bytes & 0x03; - if (rem > 0) - { - volatile uint32_t * reg_tx = (volatile uint32_t *) app_buf; + if (rem > 0) { + volatile uint32_t *reg_tx = (volatile uint32_t *)app_buf; - uint8_t remrem = (uint8_t) tu_min16(wrap_bytes, 4-rem); + uint8_t remrem = (uint8_t)tu_min16(wrap_bytes, 4 - rem); wrap_bytes -= remrem; - uint32_t tmp32=0; - uint8_t * dst_u8 = (uint8_t *)&tmp32; + uint32_t tmp32 = 0; + uint8_t *dst_u8 = (uint8_t *)&tmp32; // Read 1-3 bytes before wrapped boundary - while(rem--) *dst_u8++ = *ff_buf++; + while (rem--) { + *dst_u8++ = *ff_buf++; + } // Read more bytes from beginning to complete a word ff_buf = f->buffer; - while(remrem--) *dst_u8++ = *ff_buf++; + while (remrem--) { + *dst_u8++ = *ff_buf++; + } *reg_tx = tmp32; - } - else - { + } else { ff_buf = f->buffer; // wrap around to beginning } // Read data wrapped part - if (wrap_bytes > 0) _ff_pull_const_addr(app_buf, ff_buf, wrap_bytes); + if (wrap_bytes > 0) { + _ff_pull_const_addr(app_buf, ff_buf, wrap_bytes); + } } - break; + break; #endif - default: break; + + default: + break; // unknown mode } } @@ -322,24 +316,18 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, //--------------------------------------------------------------------+ // return only the index difference and as such can be used to determine an overflow i.e overflowable count -TU_ATTR_ALWAYS_INLINE static inline -uint16_t _ff_count(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t _ff_count(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) { // In case we have non-power of two depth we need a further modification - if (wr_idx >= rd_idx) - { - return (uint16_t) (wr_idx - rd_idx); - } else - { - return (uint16_t) (2*depth - (rd_idx - wr_idx)); + if (wr_idx >= rd_idx) { + return (uint16_t)(wr_idx - rd_idx); + } else { + return (uint16_t)(2 * depth - (rd_idx - wr_idx)); } } // return remaining slot in fifo -TU_ATTR_ALWAYS_INLINE static inline -uint16_t _ff_remaining(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) -{ - uint16_t const count = _ff_count(depth, wr_idx, rd_idx); +TU_ATTR_ALWAYS_INLINE static inline uint16_t _ff_remaining(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) { + const uint16_t count = _ff_count(depth, wr_idx, rd_idx); return (depth > count) ? (depth - count) : 0; } @@ -349,16 +337,14 @@ uint16_t _ff_remaining(uint16_t depth, uint16_t wr_idx, uint16_t rd_idx) // Advance an absolute index // "absolute" index is only in the range of [0..2*depth) -static uint16_t advance_index(uint16_t depth, uint16_t idx, uint16_t offset) -{ +static uint16_t advance_index(uint16_t depth, uint16_t idx, uint16_t offset) { // We limit the index space of p such that a correct wrap around happens // Check for a wrap around or if we are in unused index space - This has to be checked first!! // We are exploiting the wrap around to the correct index - uint16_t new_idx = (uint16_t) (idx + offset); - if ( (idx > new_idx) || (new_idx >= 2*depth) ) - { - uint16_t const non_used_index_space = (uint16_t) (UINT16_MAX - (2*depth-1)); - new_idx = (uint16_t) (new_idx + non_used_index_space); + uint16_t new_idx = (uint16_t)(idx + offset); + if ((idx > new_idx) || (new_idx >= 2 * depth)) { + const uint16_t non_used_index_space = (uint16_t)(UINT16_MAX - (2 * depth - 1)); + new_idx = (uint16_t)(new_idx + non_used_index_space); } return new_idx; @@ -366,14 +352,12 @@ static uint16_t advance_index(uint16_t depth, uint16_t idx, uint16_t offset) #if 0 // not used but // Backward an absolute index -static uint16_t backward_index(uint16_t depth, uint16_t idx, uint16_t offset) -{ +static uint16_t backward_index(uint16_t depth, uint16_t idx, uint16_t offset) { // We limit the index space of p such that a correct wrap around happens // Check for a wrap around or if we are in unused index space - This has to be checked first!! // We are exploiting the wrap around to the correct index uint16_t new_idx = (uint16_t) (idx - offset); - if ( (idx < new_idx) || (new_idx >= 2*depth) ) - { + if ( (idx < new_idx) || (new_idx >= 2*depth) ) { uint16_t const non_used_index_space = (uint16_t) (UINT16_MAX - (2*depth-1)); new_idx = (uint16_t) (new_idx - non_used_index_space); } @@ -383,26 +367,22 @@ static uint16_t backward_index(uint16_t depth, uint16_t idx, uint16_t offset) #endif // index to pointer, simply an modulo with minus. -TU_ATTR_ALWAYS_INLINE static inline -uint16_t idx2ptr(uint16_t depth, uint16_t idx) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t idx2ptr(uint16_t depth, uint16_t idx) { // Only run at most 3 times since index is limit in the range of [0..2*depth) - while ( idx >= depth ) idx -= depth; + while (idx >= depth) { + idx -= depth; + } return idx; } // Works on local copies of w // When an overwritable fifo is overflowed, rd_idx will be re-index so that it forms // an full fifo i.e _ff_count() = depth -TU_ATTR_ALWAYS_INLINE static inline -uint16_t _ff_correct_read_index(tu_fifo_t* f, uint16_t wr_idx) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t _ff_correct_read_index(tu_fifo_t *f, uint16_t wr_idx) { uint16_t rd_idx; - if ( wr_idx >= f->depth ) - { + if (wr_idx >= f->depth) { rd_idx = wr_idx - f->depth; - }else - { + } else { rd_idx = wr_idx + f->depth; } @@ -413,16 +393,16 @@ uint16_t _ff_correct_read_index(tu_fifo_t* f, uint16_t wr_idx) // Works on local copies of w and r // Must be protected by mutexes since in case of an overflow read pointer gets modified -static bool _tu_fifo_peek(tu_fifo_t* f, void * p_buffer, uint16_t wr_idx, uint16_t rd_idx) -{ +static bool _tu_fifo_peek(tu_fifo_t *f, void *p_buffer, uint16_t wr_idx, uint16_t rd_idx) { uint16_t cnt = _ff_count(f->depth, wr_idx, rd_idx); // nothing to peek - if ( cnt == 0 ) return false; + if (cnt == 0) { + return false; + } // Check overflow and correct if required - if ( cnt > f->depth ) - { + if (cnt > f->depth) { rd_idx = _ff_correct_read_index(f, wr_idx); } @@ -436,22 +416,25 @@ static bool _tu_fifo_peek(tu_fifo_t* f, void * p_buffer, uint16_t wr_idx, uint16 // Works on local copies of w and r // Must be protected by mutexes since in case of an overflow read pointer gets modified -static uint16_t _tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, tu_fifo_copy_mode_t copy_mode) -{ +static uint16_t _tu_fifo_peek_n( + tu_fifo_t *f, void *p_buffer, uint16_t n, uint16_t wr_idx, uint16_t rd_idx, tu_fifo_copy_mode_t copy_mode) { uint16_t cnt = _ff_count(f->depth, wr_idx, rd_idx); // nothing to peek - if ( cnt == 0 ) return 0; + if (cnt == 0) { + return 0; + } // Check overflow and correct if required - if ( cnt > f->depth ) - { + if (cnt > f->depth) { rd_idx = _ff_correct_read_index(f, wr_idx); - cnt = f->depth; + cnt = f->depth; } // Check if we can read something at and after offset - if too less is available we read what remains - if ( cnt < n ) n = cnt; + if (cnt < n) { + n = cnt; + } uint16_t rd_ptr = idx2ptr(f->depth, rd_idx); @@ -461,40 +444,36 @@ static uint16_t _tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n, uint1 return n; } -static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu_fifo_copy_mode_t copy_mode) -{ - if ( n == 0 ) return 0; +static uint16_t _tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n, tu_fifo_copy_mode_t copy_mode) { + if (n == 0) { + return 0; + } _ff_lock(f->mutex_wr); uint16_t wr_idx = f->wr_idx; uint16_t rd_idx = f->rd_idx; - uint8_t const* buf8 = (uint8_t const*) data; + const uint8_t *buf8 = (const uint8_t *)data; - TU_LOG(TU_FIFO_DBG, "rd = %3u, wr = %3u, count = %3u, remain = %3u, n = %3u: ", - rd_idx, wr_idx, _ff_count(f->depth, wr_idx, rd_idx), _ff_remaining(f->depth, wr_idx, rd_idx), n); + TU_LOG( + TU_FIFO_DBG, "rd = %3u, wr = %3u, count = %3u, remain = %3u, n = %3u: ", rd_idx, wr_idx, + _ff_count(f->depth, wr_idx, rd_idx), _ff_remaining(f->depth, wr_idx, rd_idx), n); - if ( !f->overwritable ) - { + if (!f->overwritable) { // limit up to full - uint16_t const remain = _ff_remaining(f->depth, wr_idx, rd_idx); - n = tu_min16(n, remain); - } - else - { + const uint16_t remain = _ff_remaining(f->depth, wr_idx, rd_idx); + n = tu_min16(n, remain); + } else { // In over-writable mode, fifo_write() is allowed even when fifo is full. In such case, // oldest data in fifo i.e at read pointer data will be overwritten // Note: we can modify read buffer contents but we must not modify the read index itself within a write function! // Since it would end up in a race condition with read functions! - if ( n >= f->depth ) - { + if (n >= f->depth) { // Only copy last part - if ( copy_mode == TU_FIFO_COPY_INC ) - { + if (copy_mode == TU_FIFO_COPY_INC) { buf8 += (n - f->depth) * f->item_size; - }else - { + } else { // TODO should read from hw fifo to discard data, however reading an odd number could // accidentally discard data. } @@ -503,12 +482,9 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu // We start writing at the read pointer's position since we fill the whole buffer wr_idx = rd_idx; - } - else - { - uint16_t const overflowable_count = _ff_count(f->depth, wr_idx, rd_idx); - if (overflowable_count + n >= 2*f->depth) - { + } else { + const uint16_t overflowable_count = _ff_count(f->depth, wr_idx, rd_idx); + if (overflowable_count + n >= 2 * f->depth) { // Double overflowed // Index is bigger than the allowed range [0,2*depth) // re-position write index to have a full fifo after pushed @@ -518,8 +494,7 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu // However memmove() is expensive due to actual copying + wrapping consideration. // Also race condition could happen anyway if read() is invoke while moving result in corrupted memory // currently deliberately not implemented --> result in incorrect data read back - }else - { + } else { // normal + single overflowed: // Index is in the range of [0,2*depth) and thus detect and recoverable. Recovering is handled in read() // Therefore we just increase write index @@ -528,16 +503,11 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu } } - if (n) - { + if (n) { uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); - TU_LOG(TU_FIFO_DBG, "actual_n = %u, wr_ptr = %u", n, wr_ptr); - // Write data _ff_push_n(f, buf8, n, wr_ptr, copy_mode); - - // Advance index f->wr_idx = advance_index(f->depth, wr_idx, n); TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\r\n", f->wr_idx); @@ -548,8 +518,7 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu return n; } -static uint16_t _tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n, tu_fifo_copy_mode_t copy_mode) -{ +static uint16_t _tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n, tu_fifo_copy_mode_t copy_mode) { _ff_lock(f->mutex_rd); // Peek the data @@ -582,8 +551,7 @@ static uint16_t _tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n, tu_fifo @returns Number of items in FIFO */ /******************************************************************************/ -uint16_t tu_fifo_count(tu_fifo_t* f) -{ +uint16_t tu_fifo_count(tu_fifo_t *f) { return tu_min16(_ff_count(f->depth, f->wr_idx, f->rd_idx), f->depth); } @@ -600,8 +568,7 @@ uint16_t tu_fifo_count(tu_fifo_t* f) @returns Number of items in FIFO */ /******************************************************************************/ -bool tu_fifo_empty(tu_fifo_t* f) -{ +bool tu_fifo_empty(tu_fifo_t *f) { return f->wr_idx == f->rd_idx; } @@ -618,8 +585,7 @@ bool tu_fifo_empty(tu_fifo_t* f) @returns Number of items in FIFO */ /******************************************************************************/ -bool tu_fifo_full(tu_fifo_t* f) -{ +bool tu_fifo_full(tu_fifo_t *f) { return _ff_count(f->depth, f->wr_idx, f->rd_idx) >= f->depth; } @@ -636,8 +602,7 @@ bool tu_fifo_full(tu_fifo_t* f) @returns Number of items in FIFO */ /******************************************************************************/ -uint16_t tu_fifo_remaining(tu_fifo_t* f) -{ +uint16_t tu_fifo_remaining(tu_fifo_t *f) { return _ff_remaining(f->depth, f->wr_idx, f->rd_idx); } @@ -662,14 +627,12 @@ uint16_t tu_fifo_remaining(tu_fifo_t* f) @returns True if overflow happened */ /******************************************************************************/ -bool tu_fifo_overflowed(tu_fifo_t* f) -{ +bool tu_fifo_overflowed(tu_fifo_t *f) { return _ff_count(f->depth, f->wr_idx, f->rd_idx) > f->depth; } // Only use in case tu_fifo_overflow() returned true! -void tu_fifo_correct_read_pointer(tu_fifo_t* f) -{ +void tu_fifo_correct_read_pointer(tu_fifo_t *f) { _ff_lock(f->mutex_rd); _ff_correct_read_index(f, f->wr_idx); _ff_unlock(f->mutex_rd); @@ -691,8 +654,7 @@ void tu_fifo_correct_read_pointer(tu_fifo_t* f) @returns TRUE if the queue is not empty */ /******************************************************************************/ -bool tu_fifo_read(tu_fifo_t* f, void * buffer) -{ +bool tu_fifo_read(tu_fifo_t *f, void *buffer) { _ff_lock(f->mutex_rd); // Peek the data @@ -722,8 +684,7 @@ bool tu_fifo_read(tu_fifo_t* f, void * buffer) @returns number of items read from the FIFO */ /******************************************************************************/ -uint16_t tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n) -{ +uint16_t tu_fifo_read_n(tu_fifo_t *f, void *buffer, uint16_t n) { return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_INC); } @@ -745,8 +706,7 @@ uint16_t tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n) @returns number of items read from the FIFO */ /******************************************************************************/ -uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t* f, void * buffer, uint16_t n) -{ +uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t *f, void *buffer, uint16_t n) { return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_CST_FULL_WORDS); } #endif @@ -764,8 +724,7 @@ uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t* f, void * buffer, uint1 @returns TRUE if the queue is not empty */ /******************************************************************************/ -bool tu_fifo_peek(tu_fifo_t* f, void * p_buffer) -{ +bool tu_fifo_peek(tu_fifo_t *f, void *p_buffer) { _ff_lock(f->mutex_rd); bool ret = _tu_fifo_peek(f, p_buffer, f->wr_idx, f->rd_idx); _ff_unlock(f->mutex_rd); @@ -787,8 +746,7 @@ bool tu_fifo_peek(tu_fifo_t* f, void * p_buffer) @returns Number of bytes written to p_buffer */ /******************************************************************************/ -uint16_t tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n) -{ +uint16_t tu_fifo_peek_n(tu_fifo_t *f, void *p_buffer, uint16_t n) { _ff_lock(f->mutex_rd); uint16_t ret = _tu_fifo_peek_n(f, p_buffer, n, f->wr_idx, f->rd_idx, TU_FIFO_COPY_INC); _ff_unlock(f->mutex_rd); @@ -811,27 +769,19 @@ uint16_t tu_fifo_peek_n(tu_fifo_t* f, void * p_buffer, uint16_t n) FIFO will always return TRUE) */ /******************************************************************************/ -bool tu_fifo_write(tu_fifo_t* f, const void * data) -{ +bool tu_fifo_write(tu_fifo_t *f, const void *data) { _ff_lock(f->mutex_wr); - bool ret; - uint16_t const wr_idx = f->wr_idx; + bool ret; + const uint16_t wr_idx = f->wr_idx; - if ( tu_fifo_full(f) && !f->overwritable ) - { + if (tu_fifo_full(f) && !f->overwritable) { ret = false; - }else - { + } else { uint16_t wr_ptr = idx2ptr(f->depth, wr_idx); - - // Write data _ff_push(f, data, wr_ptr); - - // Advance pointer f->wr_idx = advance_index(f->depth, wr_idx, 1); - - ret = true; + ret = true; } _ff_unlock(f->mutex_wr); @@ -853,8 +803,7 @@ bool tu_fifo_write(tu_fifo_t* f, const void * data) @return Number of written elements */ /******************************************************************************/ -uint16_t tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n) -{ +uint16_t tu_fifo_write_n(tu_fifo_t *f, const void *data, uint16_t n) { return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_INC); } @@ -874,8 +823,7 @@ uint16_t tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n) @return Number of written elements */ /******************************************************************************/ -uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t* f, const void * data, uint16_t n) -{ +uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t *f, const void *data, uint16_t n) { return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_CST_FULL_WORDS); } #endif @@ -888,8 +836,7 @@ uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t* f, const void * data, Pointer to the FIFO buffer to manipulate */ /******************************************************************************/ -bool tu_fifo_clear(tu_fifo_t *f) -{ +bool tu_fifo_clear(tu_fifo_t *f) { _ff_lock(f->mutex_wr); _ff_lock(f->mutex_rd); @@ -943,8 +890,7 @@ bool tu_fifo_set_overwritable(tu_fifo_t *f, bool overwritable) { Number of items the write pointer moves forward */ /******************************************************************************/ -void tu_fifo_advance_write_pointer(tu_fifo_t *f, uint16_t n) -{ +void tu_fifo_advance_write_pointer(tu_fifo_t *f, uint16_t n) { f->wr_idx = advance_index(f->depth, f->wr_idx, n); } @@ -964,8 +910,7 @@ void tu_fifo_advance_write_pointer(tu_fifo_t *f, uint16_t n) Number of items the read pointer moves forward */ /******************************************************************************/ -void tu_fifo_advance_read_pointer(tu_fifo_t *f, uint16_t n) -{ +void tu_fifo_advance_read_pointer(tu_fifo_t *f, uint16_t n) { f->rd_idx = advance_index(f->depth, f->rd_idx, n); } @@ -984,8 +929,7 @@ void tu_fifo_advance_read_pointer(tu_fifo_t *f, uint16_t n) Pointer to struct which holds the desired infos */ /******************************************************************************/ -void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) -{ +void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) { // Operate on temporary values in case they change in between uint16_t wr_idx = f->wr_idx; uint16_t rd_idx = f->rd_idx; @@ -993,8 +937,7 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) uint16_t cnt = _ff_count(f->depth, wr_idx, rd_idx); // Check overflow and correct if required - may happen in case a DMA wrote too fast - if (cnt > f->depth) - { + if (cnt > f->depth) { _ff_lock(f->mutex_rd); rd_idx = _ff_correct_read_index(f, wr_idx); _ff_unlock(f->mutex_rd); @@ -1003,8 +946,7 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) } // Check if fifo is empty - if (cnt == 0) - { + if (cnt == 0) { info->len_lin = 0; info->len_wrap = 0; info->ptr_lin = NULL; @@ -1020,17 +962,14 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) info->ptr_lin = &f->buffer[rd_ptr]; // Check if there is a wrap around necessary - if (wr_ptr > rd_ptr) - { + if (wr_ptr > rd_ptr) { // Non wrapping case - info->len_lin = cnt; + info->len_lin = cnt; info->len_wrap = 0; info->ptr_wrap = NULL; - } - else - { - info->len_lin = f->depth - rd_ptr; // Also the case if FIFO was full + } else { + info->len_lin = f->depth - rd_ptr; // Also the case if FIFO was full info->len_wrap = cnt - info->len_lin; info->ptr_wrap = f->buffer; @@ -1052,14 +991,12 @@ void tu_fifo_get_read_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) Pointer to struct which holds the desired infos */ /******************************************************************************/ -void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) -{ +void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) { uint16_t wr_idx = f->wr_idx; uint16_t rd_idx = f->rd_idx; uint16_t remain = _ff_remaining(f->depth, wr_idx, rd_idx); - if (remain == 0) - { + if (remain == 0) { info->len_lin = 0; info->len_wrap = 0; info->ptr_lin = NULL; @@ -1074,15 +1011,12 @@ void tu_fifo_get_write_info(tu_fifo_t *f, tu_fifo_buffer_info_t *info) // Copy pointer to buffer to start writing to info->ptr_lin = &f->buffer[wr_ptr]; - if (wr_ptr < rd_ptr) - { + if (wr_ptr < rd_ptr) { // Non wrapping case - info->len_lin = rd_ptr-wr_ptr; + info->len_lin = rd_ptr - wr_ptr; info->len_wrap = 0; info->ptr_wrap = NULL; - } - else - { + } else { info->len_lin = f->depth - wr_ptr; info->len_wrap = remain - info->len_lin; // Remaining length - n already was limited to remain or FIFO depth info->ptr_wrap = f->buffer; // Always start of buffer diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index f2a6c5469..0f4ba00d8 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -104,16 +104,16 @@ extern "C" { * | R | 1 | 2 | W | 4 | 5 | */ typedef struct { - uint8_t* buffer ; // buffer pointer - uint16_t depth ; // max items + uint8_t *buffer; // buffer pointer + uint16_t depth; // max items struct TU_ATTR_PACKED { - uint16_t item_size : 15; // size of each item - bool overwritable : 1 ; // ovwerwritable when full + uint16_t item_size : 15; // size of each item + bool overwritable : 1; // ovwerwritable when full }; - volatile uint16_t wr_idx ; // write index - volatile uint16_t rd_idx ; // read index + volatile uint16_t wr_idx; // write index + volatile uint16_t rd_idx; // read index #if OSAL_MUTEX_REQUIRED osal_mutex_t mutex_wr; @@ -129,12 +129,13 @@ typedef struct { void * ptr_wrap ; ///< wrapped part start pointer } tu_fifo_buffer_info_t; -#define TU_FIFO_INIT(_buffer, _depth, _type, _overwritable){\ - .buffer = _buffer, \ - .depth = _depth, \ - .item_size = sizeof(_type), \ - .overwritable = _overwritable, \ -} +#define TU_FIFO_INIT(_buffer, _depth, _type, _overwritable) \ + { \ + .buffer = _buffer, \ + .depth = _depth, \ + .item_size = sizeof(_type), \ + .overwritable = _overwritable, \ + } #define TU_FIFO_DEF(_name, _depth, _type, _overwritable) \ uint8_t _name##_buf[_depth*sizeof(_type)]; \ diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 5e1d59233..dcd5c45d6 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -40,6 +40,12 @@ extern tusb_role_t _tusb_rhport_role[TUP_USBIP_CONTROLLER_NUM]; // Endpoint //--------------------------------------------------------------------+ +enum { + TU_EDPT_STATE_BUSY = 0x01, + TU_EDPT_STATE_STALLED = 0x02, + TU_EDPT_STATE_CLAIMED = 0x04, +}; + typedef struct TU_ATTR_PACKED { volatile uint8_t busy : 1; volatile uint8_t stalled : 1; @@ -48,8 +54,8 @@ typedef struct TU_ATTR_PACKED { typedef struct { struct TU_ATTR_PACKED { - uint8_t is_host : 1; // 1: host, 0: device - uint8_t is_mps512 : 1; // 1: 512, 0: 64 since stream is used for Bulk only + bool is_host : 1; // 1: host, 0: device + bool is_mps512 : 1; // 1: 512, 0: 64 since stream is used for Bulk only }; uint8_t ep_addr; uint16_t ep_bufsize; @@ -93,21 +99,18 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove bool tu_edpt_stream_deinit(tu_edpt_stream_t* s); // Open an stream for an endpoint -TU_ATTR_ALWAYS_INLINE static inline -void tu_edpt_stream_open(tu_edpt_stream_t* s, tusb_desc_endpoint_t const *desc_ep) { +TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_open(tu_edpt_stream_t* s, tusb_desc_endpoint_t const *desc_ep) { tu_fifo_clear(&s->ff); s->ep_addr = desc_ep->bEndpointAddress; - s->is_mps512 = (tu_edpt_packet_size(desc_ep) == 512) ? 1 : 0; + s->is_mps512 = tu_edpt_packet_size(desc_ep) == 512; } -TU_ATTR_ALWAYS_INLINE static inline -void tu_edpt_stream_close(tu_edpt_stream_t* s) { +TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_close(tu_edpt_stream_t* s) { s->ep_addr = 0; } // Clear fifo -TU_ATTR_ALWAYS_INLINE static inline -bool tu_edpt_stream_clear(tu_edpt_stream_t* s) { +TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_clear(tu_edpt_stream_t* s) { return tu_fifo_clear(&s->ff); } diff --git a/src/tusb.c b/src/tusb.c index be67eead2..7411f19df 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -117,11 +117,15 @@ bool tusb_inited(void) { bool ret = false; #if CFG_TUD_ENABLED - ret = ret || tud_inited(); + if (tud_inited()) { + ret = true; + } #endif #if CFG_TUH_ENABLED - ret = ret || tuh_inited(); + if (tuh_inited()) { + ret = true; + } #endif return ret; @@ -209,7 +213,8 @@ bool tu_edpt_claim(tu_edpt_state_t* ep_state, osal_mutex_t mutex) { (void) mutex; // pre-check to help reducing mutex lock - TU_VERIFY((ep_state->busy == 0) && (ep_state->claimed == 0)); + TU_VERIFY(ep_state->busy == 0); + TU_VERIFY(ep_state->claimed == 0); (void) osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER); // can only claim the endpoint if it is not busy and not claimed yet. @@ -298,7 +303,7 @@ uint16_t tu_desc_get_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t const* p_desc = (uint8_t const*) desc_itf; uint16_t len = 0; - while (itf_count--) { + while ((itf_count--) > 0) { // Next on interface desc len += tu_desc_len(desc_itf); p_desc = tu_desc_next(p_desc); @@ -337,7 +342,7 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove tu_fifo_config(&s->ff, ff_buf, ff_bufsize, 1, overwritable); #if OSAL_MUTEX_REQUIRED - if (ff_buf && ff_bufsize) { + if (ff_buf != NULL && ff_bufsize > 0) { osal_mutex_t new_mutex = osal_mutex_create(&s->ff_mutexdef); tu_fifo_config_mutex(&s->ff, is_tx ? new_mutex : NULL, is_tx ? NULL : new_mutex); } @@ -352,9 +357,13 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove bool tu_edpt_stream_deinit(tu_edpt_stream_t* s) { (void) s; #if OSAL_MUTEX_REQUIRED - if (s->ff.mutex_wr) osal_mutex_delete(s->ff.mutex_wr); - if (s->ff.mutex_rd) osal_mutex_delete(s->ff.mutex_rd); - #endif + if (s->ff.mutex_wr) { + osal_mutex_delete(s->ff.mutex_wr); + } + if (s->ff.mutex_rd) { + osal_mutex_delete(s->ff.mutex_rd); + } +#endif return true; } @@ -403,7 +412,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool stream_release(uint8_t hwid, tu_edpt_st bool tu_edpt_stream_write_zlp_if_needed(uint8_t hwid, tu_edpt_stream_t* s, uint32_t last_xferred_bytes) { // ZLP condition: no pending data, last transferred bytes is multiple of packet size const uint16_t mps = s->is_mps512 ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS; - TU_VERIFY(!tu_fifo_count(&s->ff) && last_xferred_bytes && (0 == (last_xferred_bytes & (mps - 1)))); + TU_VERIFY(!tu_fifo_count(&s->ff) && last_xferred_bytes > 0 && (0 == (last_xferred_bytes & (mps - 1)))); TU_VERIFY(stream_claim(hwid, s)); TU_ASSERT(stream_xfer(hwid, s, 0)); return true; @@ -411,14 +420,13 @@ bool tu_edpt_stream_write_zlp_if_needed(uint8_t hwid, tu_edpt_stream_t* s, uint3 uint32_t tu_edpt_stream_write_xfer(uint8_t hwid, tu_edpt_stream_t* s) { // skip if no data - TU_VERIFY(tu_fifo_count(&s->ff), 0); - + TU_VERIFY(tu_fifo_count(&s->ff) > 0, 0); TU_VERIFY(stream_claim(hwid, s), 0); // Pull data from FIFO -> EP buf uint16_t const count = tu_fifo_read_n(&s->ff, s->ep_buf, s->ep_bufsize); - if (count) { + if (count > 0) { TU_ASSERT(stream_xfer(hwid, s, count), 0); return count; } else { @@ -430,7 +438,7 @@ uint32_t tu_edpt_stream_write_xfer(uint8_t hwid, tu_edpt_stream_t* s) { } uint32_t tu_edpt_stream_write(uint8_t hwid, tu_edpt_stream_t* s, void const* buffer, uint32_t bufsize) { - TU_VERIFY(bufsize); // TODO support ZLP + TU_VERIFY(bufsize > 0); // TODO support ZLP if (0 == tu_fifo_depth(&s->ff)) { // no fifo for buffered @@ -453,7 +461,7 @@ uint32_t tu_edpt_stream_write(uint8_t hwid, tu_edpt_stream_t* s, void const* buf } uint32_t tu_edpt_stream_write_available(uint8_t hwid, tu_edpt_stream_t* s) { - if (tu_fifo_depth(&s->ff)) { + if (tu_fifo_depth(&s->ff) > 0) { return (uint32_t) tu_fifo_remaining(&s->ff); } else { bool is_busy = true; @@ -596,7 +604,7 @@ void tu_print_mem(void const* buf, uint32_t count, uint8_t indent) { // fill up last row to 16 for printing ascii const uint32_t remain = count % 16; uint8_t nback = (uint8_t) (remain ? remain : 16); - if (remain) { + if (remain > 0) { for (uint32_t i = 0; i < 16 - remain; i++) { tu_printf(" "); for (int j = 0; j < 2 * size; j++) { -- cgit v1.3.1 From f11adb02ebc0c594a7114b08585b8af18c3ee6d6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 12 Nov 2025 21:22:25 +0700 Subject: migrate cdc device to use edpt stream API tu_edpt_stream_open() does not clear fifo, allow for persistent stream when disconnect/reconnect --- .clang-format | 7 +- .../net_lwip_webserver/src/usb_descriptors.c | 2 +- src/class/cdc/cdc_device.c | 393 +++++++++------------ src/class/midi/midi_device.c | 2 + src/class/vendor/vendor_device.c | 16 +- src/common/tusb_private.h | 7 +- src/tusb.c | 8 +- 7 files changed, 194 insertions(+), 241 deletions(-) (limited to 'examples') diff --git a/.clang-format b/.clang-format index c278fec37..40d40f7e9 100644 --- a/.clang-format +++ b/.clang-format @@ -1,7 +1,7 @@ --- Language: Cpp BasedOnStyle: LLVM -AlignAfterOpenBracket: AlwaysBreak +AlignAfterOpenBracket: Align AlignConsecutiveAssignments: Enabled: true AcrossEmptyLines: false @@ -38,6 +38,7 @@ AllowShortEnumsOnASingleLine: false AllowShortFunctionsOnASingleLine: None AllowShortIfStatementsOnASingleLine: Never AlwaysBreakTemplateDeclarations: Yes +BinPackArguments: true BreakBeforeBraces: Custom BraceWrapping: AfterCaseLabel: false @@ -57,8 +58,10 @@ BraceWrapping: SplitEmptyRecord: true SplitEmptyNamespace: true BracedInitializerIndentWidth: 2 +BreakBeforeBinaryOperators: None BreakConstructorInitializers: AfterColon BreakConstructorInitializersBeforeComma: false +ContinuationIndentWidth: 2 ColumnLimit: 120 ConstructorInitializerAllOnOneLineOrOnePerLine: false Cpp11BracedListStyle: true @@ -78,6 +81,8 @@ MacroBlockBegin: '' MacroBlockEnd: '' MaxEmptyLinesToKeep: 2 NamespaceIndentation: All +PenaltyBreakBeforeFirstCallParameter: 1000000 +PenaltyBreakOpenParenthesis: 1000000 QualifierAlignment: Custom QualifierOrder: ['static', 'const', 'volatile', 'restrict', 'type'] ReflowComments: false diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index b49962d65..c976cb62b 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -270,7 +270,7 @@ bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_contro switch (request->bmRequestType_bit.type) { case TUSB_REQ_TYPE_VENDOR: - switch (request->bRequest) { //-V2520 //-V2659 + switch (request->bRequest) { case 1: if (request->wIndex == 7) { // Get Microsoft OS 2.0 compatible descriptor diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index b3253b141..92139b14e 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -48,28 +48,23 @@ typedef struct { uint8_t rhport; uint8_t itf_num; - uint8_t ep_in; - uint8_t ep_out; - uint8_t ep_notify; uint8_t line_state; // Bit 0: DTR, Bit 1: RTS /*------------- From this point, data is not cleared by bus reset -------------*/ - char wanted_char; TU_ATTR_ALIGNED(4) cdc_line_coding_t line_coding; + char wanted_char; - // FIFO - tu_fifo_t rx_ff; - tu_fifo_t tx_ff; - - uint8_t rx_ff_buf[CFG_TUD_CDC_RX_BUFSIZE]; - uint8_t tx_ff_buf[CFG_TUD_CDC_TX_BUFSIZE]; + struct { + tu_edpt_stream_t tx; + tu_edpt_stream_t rx; - OSAL_MUTEX_DEF(rx_ff_mutex); - OSAL_MUTEX_DEF(tx_ff_mutex); + uint8_t tx_ff_buf[CFG_TUD_CDC_TX_BUFSIZE]; + uint8_t rx_ff_buf[CFG_TUD_CDC_RX_BUFSIZE]; + } stream; } cdcd_interface_t; -#define ITF_MEM_RESET_SIZE offsetof(cdcd_interface_t, wanted_char) +#define ITF_MEM_RESET_SIZE offsetof(cdcd_interface_t, line_coding) typedef struct { TUD_EPBUF_DEF(epout, CFG_TUD_CDC_EP_BUFSIZE); @@ -80,111 +75,102 @@ typedef struct { #endif } cdcd_epbuf_t; -//--------------------------------------------------------------------+ -// INTERNAL OBJECT & FUNCTION DECLARATION -//--------------------------------------------------------------------+ -static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; -CFG_TUD_MEM_SECTION static cdcd_epbuf_t _cdcd_epbuf[CFG_TUD_CDC]; - -static tud_cdc_configure_t _cdcd_cfg = TUD_CDC_CONFIGURE_DEFAULT(); - -static bool _prep_out_transaction(uint8_t itf) { - const uint8_t rhport = 0; - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; - - // Skip if usb is not ready yet - TU_VERIFY(tud_ready() && p_cdc->ep_out); - - uint16_t available = tu_fifo_remaining(&p_cdc->rx_ff); - - // Prepare for incoming data but only allow what we can store in the ring buffer. - // TODO Actually we can still carry out the transfer, keeping count of received bytes - // and slowly move it to the FIFO when read(). - // This pre-check reduces endpoint claiming - TU_VERIFY(available >= CFG_TUD_CDC_EP_BUFSIZE); - - // claim endpoint - TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_out)); - - // fifo can be changed before endpoint is claimed - available = tu_fifo_remaining(&p_cdc->rx_ff); - - if (available >= CFG_TUD_CDC_EP_BUFSIZE) { - return usbd_edpt_xfer(rhport, p_cdc->ep_out, p_epbuf->epout, CFG_TUD_CDC_EP_BUFSIZE); - } else { - // Release endpoint since we don't make any transfer - usbd_edpt_release(p_cdc->rhport, p_cdc->ep_out); - return false; - } -} - //--------------------------------------------------------------------+ // Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ TU_ATTR_WEAK void tud_cdc_rx_cb(uint8_t itf) { - (void) itf; + (void)itf; } TU_ATTR_WEAK void tud_cdc_rx_wanted_cb(uint8_t itf, char wanted_char) { - (void) itf; - (void) wanted_char; + (void)itf; + (void)wanted_char; } TU_ATTR_WEAK void tud_cdc_tx_complete_cb(uint8_t itf) { - (void) itf; + (void)itf; } TU_ATTR_WEAK void tud_cdc_notify_complete_cb(uint8_t itf) { - (void) itf; + (void)itf; } TU_ATTR_WEAK void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) { - (void) itf; - (void) dtr; - (void) rts; + (void)itf; + (void)dtr; + (void)rts; } -TU_ATTR_WEAK void tud_cdc_line_coding_cb(uint8_t itf, cdc_line_coding_t const* p_line_coding) { - (void) itf; - (void) p_line_coding; +TU_ATTR_WEAK void tud_cdc_line_coding_cb(uint8_t itf, const cdc_line_coding_t *p_line_coding) { + (void)itf; + (void)p_line_coding; } TU_ATTR_WEAK void tud_cdc_send_break_cb(uint8_t itf, uint16_t duration_ms) { - (void) itf; - (void) duration_ms; + (void)itf; + (void)duration_ms; +} + +//--------------------------------------------------------------------+ +// INTERNAL OBJECT & FUNCTION DECLARATION +//--------------------------------------------------------------------+ +static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; +CFG_TUD_MEM_SECTION static cdcd_epbuf_t _cdcd_epbuf[CFG_TUD_CDC]; +static tud_cdc_configure_t _cdcd_cfg = TUD_CDC_CONFIGURE_DEFAULT(); + +TU_ATTR_ALWAYS_INLINE static inline uint8_t find_cdc_itf(uint8_t ep_addr) { + for (uint8_t idx = 0; idx < CFG_TUD_CDC; idx++) { + const cdcd_interface_t *p_cdc = &_cdcd_itf[idx]; + if (ep_addr == p_cdc->stream.rx.ep_addr || ep_addr == p_cdc->stream.tx.ep_addr || + (ep_addr == p_cdc->ep_notify && ep_addr != 0)) { + return idx; + } + } + return TUSB_INDEX_INVALID_8; } //--------------------------------------------------------------------+ // APPLICATION API //--------------------------------------------------------------------+ bool tud_cdc_configure(const tud_cdc_configure_t* driver_cfg) { - TU_VERIFY(driver_cfg); + TU_VERIFY(driver_cfg != NULL); _cdcd_cfg = *driver_cfg; return true; } bool tud_cdc_n_ready(uint8_t itf) { - return tud_ready() && _cdcd_itf[itf].ep_in != 0 && _cdcd_itf[itf].ep_out != 0; + TU_VERIFY(itf < CFG_TUD_CDC); + TU_VERIFY(tud_ready()); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + + const bool in_opened = tu_edpt_stream_is_opened(&p_cdc->stream.tx); + const bool out_opened = tu_edpt_stream_is_opened(&p_cdc->stream.rx); + return in_opened && out_opened; } bool tud_cdc_n_connected(uint8_t itf) { + TU_VERIFY(itf < CFG_TUD_CDC); + TU_VERIFY(tud_ready()); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; // DTR (bit 0) active is considered as connected - return tud_ready() && tu_bit_test(_cdcd_itf[itf].line_state, 0); + return tu_bit_test(p_cdc->line_state, 0); } uint8_t tud_cdc_n_get_line_state(uint8_t itf) { + TU_VERIFY(itf < CFG_TUD_CDC, 0); return _cdcd_itf[itf].line_state; } -void tud_cdc_n_get_line_coding(uint8_t itf, cdc_line_coding_t* coding) { +void tud_cdc_n_get_line_coding(uint8_t itf, cdc_line_coding_t *coding) { + TU_VERIFY(itf < CFG_TUD_CDC, ); (*coding) = _cdcd_itf[itf].line_coding; } #if CFG_TUD_CDC_NOTIFY bool tud_cdc_n_notify_uart_state (uint8_t itf, const cdc_notify_uart_state_t *state) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + cdcd_epbuf_t *p_epbuf = &_cdcd_epbuf[itf]; TU_VERIFY(tud_ready() && p_cdc->ep_notify != 0); TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_notify)); @@ -200,8 +186,9 @@ bool tud_cdc_n_notify_uart_state (uint8_t itf, const cdc_notify_uart_state_t *st } bool tud_cdc_n_notify_conn_speed_change(uint8_t itf, const cdc_notify_conn_speed_change_t* conn_speed_change) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + cdcd_epbuf_t *p_epbuf = &_cdcd_epbuf[itf]; TU_VERIFY(tud_ready() && p_cdc->ep_notify != 0); TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_notify)); @@ -218,6 +205,7 @@ bool tud_cdc_n_notify_conn_speed_change(uint8_t itf, const cdc_notify_conn_speed #endif void tud_cdc_n_set_wanted_char(uint8_t itf, char wanted) { + TU_VERIFY(itf < CFG_TUD_CDC, ); _cdcd_itf[itf].wanted_char = wanted; } @@ -225,77 +213,55 @@ void tud_cdc_n_set_wanted_char(uint8_t itf, char wanted) { // READ API //--------------------------------------------------------------------+ uint32_t tud_cdc_n_available(uint8_t itf) { - return tu_fifo_count(&_cdcd_itf[itf].rx_ff); + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_read_available(&p_cdc->stream.rx); } uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); - _prep_out_transaction(itf); - return num_read; + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_read(p_cdc->rhport, &p_cdc->stream.rx, buffer, bufsize); } -bool tud_cdc_n_peek(uint8_t itf, uint8_t* chr) { - return tu_fifo_peek(&_cdcd_itf[itf].rx_ff, chr); +bool tud_cdc_n_peek(uint8_t itf, uint8_t *chr) { + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_peek(&p_cdc->stream.rx, chr); } void tud_cdc_n_read_flush(uint8_t itf) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - tu_fifo_clear(&p_cdc->rx_ff); - _prep_out_transaction(itf); + TU_VERIFY(itf < CFG_TUD_CDC, ); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + tu_edpt_stream_clear(&p_cdc->stream.rx); + tu_edpt_stream_read_xfer(p_cdc->rhport, &p_cdc->stream.rx); } //--------------------------------------------------------------------+ // WRITE API //--------------------------------------------------------------------+ uint32_t tud_cdc_n_write(uint8_t itf, const void* buffer, uint32_t bufsize) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint16_t wr_count = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); - - // flush if queue more than packet size - if (tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE - #if CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE - || tu_fifo_full(&p_cdc->tx_ff) // check full if fifo size is less than packet size - #endif - ) { - tud_cdc_n_write_flush(itf); - } - - return wr_count; + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_write(p_cdc->rhport, &p_cdc->stream.tx, buffer, bufsize); } uint32_t tud_cdc_n_write_flush(uint8_t itf) { - cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; - TU_VERIFY(tud_ready(), 0); // Skip if usb is not ready yet - - // No data to send - if (0 == tu_fifo_count(&p_cdc->tx_ff)) { - return 0; - } - - TU_VERIFY(usbd_edpt_claim(p_cdc->rhport, p_cdc->ep_in), 0); // Claim the endpoint - - // Pull data from FIFO - const uint16_t count = tu_fifo_read_n(&p_cdc->tx_ff, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); - - if (count > 0) { - TU_ASSERT(usbd_edpt_xfer(p_cdc->rhport, p_cdc->ep_in, p_epbuf->epin, count), 0); - return count; - } else { - // Release endpoint since we don't make any transfer - // Note: data is dropped if terminal is not connected - usbd_edpt_release(p_cdc->rhport, p_cdc->ep_in); - return 0; - } + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_write_xfer(p_cdc->rhport, &p_cdc->stream.tx); } uint32_t tud_cdc_n_write_available(uint8_t itf) { - return tu_fifo_remaining(&_cdcd_itf[itf].tx_ff); + TU_VERIFY(itf < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_write_available(p_cdc->rhport, &p_cdc->stream.tx); } bool tud_cdc_n_write_clear(uint8_t itf) { - return tu_fifo_clear(&_cdcd_itf[itf].tx_ff); + TU_VERIFY(itf < CFG_TUD_CDC); + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + return tu_edpt_stream_clear(&p_cdc->stream.tx); } //--------------------------------------------------------------------+ @@ -304,7 +270,8 @@ bool tud_cdc_n_write_clear(uint8_t itf) { void cdcd_init(void) { tu_memclr(_cdcd_itf, sizeof(_cdcd_itf)); for (uint8_t i = 0; i < CFG_TUD_CDC; i++) { - cdcd_interface_t* p_cdc = &_cdcd_itf[i]; + cdcd_interface_t *p_cdc = &_cdcd_itf[i]; + cdcd_epbuf_t *p_epbuf = &_cdcd_epbuf[i]; p_cdc->wanted_char = (char) -1; @@ -314,44 +281,23 @@ void cdcd_init(void) { p_cdc->line_coding.parity = 0; p_cdc->line_coding.data_bits = 8; - // Config RX fifo - tu_fifo_config(&p_cdc->rx_ff, p_cdc->rx_ff_buf, TU_ARRAY_SIZE(p_cdc->rx_ff_buf), 1, false); + tu_edpt_stream_init(&p_cdc->stream.rx, false, false, false, p_cdc->stream.rx_ff_buf, CFG_TUD_CDC_RX_BUFSIZE, + p_epbuf->epout, CFG_TUD_CDC_EP_BUFSIZE); // TX fifo can be configured to change to overwritable if not connected (DTR bit not set). Without DTR we do not // know if data is actually polled by terminal. This way the most current data is prioritized. // Default: is overwritable - tu_fifo_config(&p_cdc->tx_ff, p_cdc->tx_ff_buf, TU_ARRAY_SIZE(p_cdc->tx_ff_buf), 1, _cdcd_cfg.tx_overwritabe_if_not_connected); - - #if OSAL_MUTEX_REQUIRED - osal_mutex_t mutex_rd = osal_mutex_create(&p_cdc->rx_ff_mutex); - osal_mutex_t mutex_wr = osal_mutex_create(&p_cdc->tx_ff_mutex); - TU_ASSERT(mutex_rd != NULL && mutex_wr != NULL, ); - - tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, mutex_rd); - tu_fifo_config_mutex(&p_cdc->tx_ff, mutex_wr, NULL); - #endif + tu_edpt_stream_init(&p_cdc->stream.tx, false, true, _cdcd_cfg.tx_overwritabe_if_not_connected, + p_cdc->stream.tx_ff_buf, CFG_TUD_CDC_TX_BUFSIZE, p_epbuf->epin, CFG_TUD_CDC_EP_BUFSIZE); } } bool cdcd_deinit(void) { - #if OSAL_MUTEX_REQUIRED for(uint8_t i=0; irx_ff.mutex_rd; - const osal_mutex_t mutex_wr = p_cdc->tx_ff.mutex_wr; - - if (mutex_rd != NULL) { - osal_mutex_delete(mutex_rd); - tu_fifo_config_mutex(&p_cdc->rx_ff, NULL, NULL); - } - - if (mutex_wr != NULL) { - osal_mutex_delete(mutex_wr); - tu_fifo_config_mutex(&p_cdc->tx_ff, NULL, NULL); - } + tu_edpt_stream_deinit(&p_cdc->stream.rx); + tu_edpt_stream_deinit(&p_cdc->stream.tx); } - #endif - return true; } @@ -360,74 +306,85 @@ void cdcd_reset(uint8_t rhport) { for (uint8_t i = 0; i < CFG_TUD_CDC; i++) { cdcd_interface_t* p_cdc = &_cdcd_itf[i]; - tu_memclr(p_cdc, ITF_MEM_RESET_SIZE); - if (!_cdcd_cfg.rx_persistent) { - tu_fifo_clear(&p_cdc->rx_ff); - } - if (!_cdcd_cfg.tx_persistent) { - tu_fifo_clear(&p_cdc->tx_ff); - } - tu_fifo_set_overwritable(&p_cdc->tx_ff, _cdcd_cfg.tx_overwritabe_if_not_connected); + + tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, _cdcd_cfg.tx_overwritabe_if_not_connected); // // back to default + tu_edpt_stream_close(&p_cdc->stream.rx); + tu_edpt_stream_close(&p_cdc->stream.tx); } } uint16_t cdcd_open(uint8_t rhport, const tusb_desc_interface_t* itf_desc, uint16_t max_len) { // Only support ACM subclass - TU_VERIFY( TUSB_CLASS_CDC == itf_desc->bInterfaceClass && - CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL == itf_desc->bInterfaceSubClass, 0); + TU_VERIFY(TUSB_CLASS_CDC == itf_desc->bInterfaceClass && + CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL == itf_desc->bInterfaceSubClass, + 0); - // Find available interface - cdcd_interface_t* p_cdc; - uint8_t cdc_id; - for (cdc_id = 0; cdc_id < CFG_TUD_CDC; cdc_id++) { - p_cdc = &_cdcd_itf[cdc_id]; - if (p_cdc->ep_in == 0) { - break; - } - } + const uint8_t cdc_id = find_cdc_itf(0); // Find available interface TU_ASSERT(cdc_id < CFG_TUD_CDC, 0); + cdcd_interface_t *p_cdc = &_cdcd_itf[cdc_id]; //------------- Control Interface -------------// p_cdc->rhport = rhport; p_cdc->itf_num = itf_desc->bInterfaceNumber; - uint16_t drv_len = sizeof(tusb_desc_interface_t); - const uint8_t* p_desc = tu_desc_next(itf_desc); + const uint8_t *p_desc = (const uint8_t *)itf_desc; + const uint8_t *desc_end = p_desc + max_len; - // Communication Functional Descriptors - while (TUSB_DESC_CS_INTERFACE == tu_desc_type(p_desc) && drv_len <= max_len) { - drv_len += tu_desc_len(p_desc); + // Skip all class-specific descriptor + p_desc = tu_desc_next(itf_desc); + while (tu_desc_in_bounds(p_desc, desc_end) && TUSB_DESC_CS_INTERFACE == tu_desc_type(p_desc)) { p_desc = tu_desc_next(p_desc); } + // notification endpoint (optional) if (TUSB_DESC_ENDPOINT == tu_desc_type(p_desc)) { - // notification endpoint const tusb_desc_endpoint_t* desc_ep = (const tusb_desc_endpoint_t*) p_desc; TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0); p_cdc->ep_notify = desc_ep->bEndpointAddress; - drv_len += tu_desc_len(p_desc); p_desc = tu_desc_next(p_desc); } - //------------- Data Interface (if any) -------------// - if ((TUSB_DESC_INTERFACE == tu_desc_type(p_desc)) && - (TUSB_CLASS_CDC_DATA == ((const tusb_desc_interface_t*) p_desc)->bInterfaceClass)) { - // next to endpoint descriptor - drv_len += tu_desc_len(p_desc); - p_desc = tu_desc_next(p_desc); + //------------- Data Interface (optional) -------------// + if (TUSB_DESC_INTERFACE == tu_desc_type(p_desc)) { + const tusb_desc_interface_t *data_itf_desc = (const tusb_desc_interface_t *)p_desc; + if (TUSB_CLASS_CDC_DATA == data_itf_desc->bInterfaceClass) { + for (uint8_t e = 0; e < data_itf_desc->bNumEndpoints; e++) { + if (!tu_desc_in_bounds(p_desc, desc_end)) { + break; + } + p_desc = tu_desc_next(p_desc); - // Open endpoint pair - TU_ASSERT(usbd_open_edpt_pair(rhport, p_desc, 2, TUSB_XFER_BULK, &p_cdc->ep_out, &p_cdc->ep_in), 0); + const tusb_desc_endpoint_t *desc_ep = (const tusb_desc_endpoint_t *)p_desc; + TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_BULK == desc_ep->bmAttributes.xfer, 0); - drv_len += 2 * sizeof(tusb_desc_endpoint_t); - } + TU_ASSERT(usbd_edpt_open(rhport, desc_ep), 0); + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + tu_edpt_stream_t *stream_tx = &p_cdc->stream.tx; + tu_edpt_stream_open(stream_tx, desc_ep); + + if (_cdcd_cfg.tx_persistent) { + tu_edpt_stream_write_xfer(rhport, stream_tx); // flush pending data + } else { + tu_edpt_stream_clear(stream_tx); + } + } else { + tu_edpt_stream_t *stream_rx = &p_cdc->stream.rx; - // Prepare for incoming data - _prep_out_transaction(cdc_id); + tu_edpt_stream_open(stream_rx, desc_ep); + if (!_cdcd_cfg.rx_persistent) { + tu_edpt_stream_clear(stream_rx); + } + TU_ASSERT(tu_edpt_stream_read_xfer(rhport, stream_rx) > 0, 0); // prepare for incoming data + } + } - return drv_len; + p_desc = tu_desc_next(p_desc); + } + } + + return p_desc - (const uint8_t *)itf_desc; } // Invoked when a control transfer occurred on an interface of this class @@ -449,7 +406,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } TU_VERIFY(itf < CFG_TUD_CDC); - switch (request->bRequest) { //-V2520 //-V2659 + switch (request->bRequest) { case CDC_REQUEST_SET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { TU_LOG_DRV(" Set Line Coding\r\n"); @@ -484,15 +441,13 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ // If enabled: fifo overwriting is disabled if DTR bit is set and vice versa if (_cdcd_cfg.tx_overwritabe_if_not_connected) { - tu_fifo_set_overwritable(&p_cdc->tx_ff, !dtr); + tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, !dtr); } else { - tu_fifo_set_overwritable(&p_cdc->tx_ff, false); + tu_fifo_set_overwritable(&p_cdc->stream.tx.ff, false); } TU_LOG_DRV(" Set Control Line State: DTR = %d, RTS = %d\r\n", dtr, rts); - - // Invoke callback - tud_cdc_line_state_cb(itf, dtr, rts); + tud_cdc_line_state_cb(itf, dtr, rts); // invoke callback } else { // nothing to do } @@ -507,7 +462,6 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } else { // nothing to do } - break; default: @@ -518,58 +472,45 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, const tusb_control_requ } bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { - (void) result; + (void)result; - uint8_t itf; - cdcd_interface_t* p_cdc; - - // Identify which interface to use - for (itf = 0; itf < CFG_TUD_CDC; itf++) { - p_cdc = &_cdcd_itf[itf]; - if ((ep_addr == p_cdc->ep_out) || (ep_addr == p_cdc->ep_in) || (ep_addr == p_cdc->ep_notify)) { - break; - } - } + uint8_t itf = find_cdc_itf(ep_addr); TU_ASSERT(itf < CFG_TUD_CDC); - cdcd_epbuf_t* p_epbuf = &_cdcd_epbuf[itf]; + cdcd_interface_t *p_cdc = &_cdcd_itf[itf]; + tu_edpt_stream_t *stream_rx = &p_cdc->stream.rx; + tu_edpt_stream_t *stream_tx = &p_cdc->stream.tx; - // Received new data - if (ep_addr == p_cdc->ep_out) { - tu_fifo_write_n(&p_cdc->rx_ff, p_epbuf->epout, (uint16_t) xferred_bytes); + // Received new data, move to fifo + if (ep_addr == stream_rx->ep_addr) { + tu_edpt_stream_read_xfer_complete(stream_rx, xferred_bytes); - // Check for wanted char and invoke callback if needed - if (((signed char) p_cdc->wanted_char) != -1) { + // Check for wanted char and invoke wanted callback (multiple times if multiple wanted received) + if (((signed char)p_cdc->wanted_char) != -1) { for (uint32_t i = 0; i < xferred_bytes; i++) { - if ((p_cdc->wanted_char == (char) p_epbuf->epout[i]) && !tu_fifo_empty(&p_cdc->rx_ff)) { + if ((p_cdc->wanted_char == (char)stream_rx->ep_buf[i]) && !tu_edpt_stream_empty(stream_rx)) { tud_cdc_rx_wanted_cb(itf, p_cdc->wanted_char); } } } - // invoke receive callback (if there is still data) - if (!tu_fifo_empty(&p_cdc->rx_ff)) { + // invoke receive callback if there is still data + if (!tu_edpt_stream_empty(stream_rx)) { tud_cdc_rx_cb(itf); } - // prepare for OUT transaction - _prep_out_transaction(itf); + tu_edpt_stream_read_xfer(rhport, stream_rx); // prepare for more data } // Data sent to host, we continue to fetch from tx fifo to send. // Note: This will cause incorrect baudrate set in line coding. // Though maybe the baudrate is not really important !!! - if (ep_addr == p_cdc->ep_in) { + if (ep_addr == stream_tx->ep_addr) { // invoke transmit callback to possibly refill tx fifo tud_cdc_tx_complete_cb(itf); - if (0 == tud_cdc_n_write_flush(itf)) { - // If there is no data left, a ZLP should be sent if - // xferred_bytes is multiple of EP Packet size and not zero - if (0 == tu_fifo_count(&p_cdc->tx_ff) && xferred_bytes > 0 && (0 == (xferred_bytes & (BULK_PACKET_SIZE - 1)))) { - if (usbd_edpt_claim(rhport, p_cdc->ep_in)) { - TU_ASSERT(usbd_edpt_xfer(rhport, p_cdc->ep_in, NULL, 0)); - } - } + if (0 == tu_edpt_stream_write_xfer(rhport, stream_tx)) { + // If there is no data left, a ZLP should be sent if needed + tu_edpt_stream_write_zlp_if_needed(rhport, stream_tx, xferred_bytes); } } diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index f065e486a..79e7dfa71 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -405,8 +405,10 @@ uint16_t midid_open(uint8_t rhport, const tusb_desc_interface_t *desc_itf, uint1 if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { tu_edpt_stream_open(&p_midi->ep_stream.tx, desc_ep); + tu_edpt_stream_clear(&p_midi->ep_stream.tx); } else { tu_edpt_stream_open(&p_midi->ep_stream.rx, desc_ep); + tu_edpt_stream_clear(&p_midi->ep_stream.rx); TU_ASSERT(tu_edpt_stream_read_xfer(rhport, &p_midi->ep_stream.rx) > 0, 0); // prepare to receive data } diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index c916ebe47..7da4d2239 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -234,16 +234,18 @@ uint16_t vendord_open(uint8_t rhport, const tusb_desc_interface_t* desc_itf, uin const tusb_desc_endpoint_t* desc_ep = (const tusb_desc_endpoint_t*) p_desc; TU_ASSERT(usbd_edpt_open(rhport, desc_ep)); - // open endpoint stream, skip if already opened + // open endpoint stream, skip if already opened (multiple IN/OUT endpoints) if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { - if (p_vendor->tx.stream.ep_addr == 0) { - tu_edpt_stream_open(&p_vendor->tx.stream, desc_ep); - tud_vendor_n_write_flush(itf); + tu_edpt_stream_t *stream_tx = &p_vendor->tx.stream; + if (stream_tx->ep_addr == 0) { + tu_edpt_stream_open(stream_tx, desc_ep); + tu_edpt_stream_write_xfer(rhport, stream_tx); // flush pending data } } else { - if (p_vendor->rx.stream.ep_addr == 0) { - tu_edpt_stream_open(&p_vendor->rx.stream, desc_ep); - TU_ASSERT(tu_edpt_stream_read_xfer(rhport, &p_vendor->rx.stream) > 0, 0); // prepare for incoming data + tu_edpt_stream_t *stream_rx = &p_vendor->rx.stream; + if (stream_rx->ep_addr == 0) { + tu_edpt_stream_open(stream_rx, desc_ep); + TU_ASSERT(tu_edpt_stream_read_xfer(rhport, stream_rx) > 0, 0); // prepare for incoming data } } } diff --git a/src/common/tusb_private.h b/src/common/tusb_private.h index 367209e57..f82f87b6f 100644 --- a/src/common/tusb_private.h +++ b/src/common/tusb_private.h @@ -100,7 +100,6 @@ bool tu_edpt_stream_deinit(tu_edpt_stream_t* s); // Open an stream for an endpoint TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_open(tu_edpt_stream_t* s, tusb_desc_endpoint_t const *desc_ep) { - tu_fifo_clear(&s->ff); s->ep_addr = desc_ep->bEndpointAddress; s->is_mps512 = tu_edpt_packet_size(desc_ep) == 512; } @@ -113,11 +112,15 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_edpt_stream_close(tu_edpt_stream_t* s->ep_addr = 0; } -// Clear fifo TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_clear(tu_edpt_stream_t* s) { return tu_fifo_clear(&s->ff); } +TU_ATTR_ALWAYS_INLINE static inline bool tu_edpt_stream_empty(tu_edpt_stream_t *s) { + return tu_fifo_empty(&s->ff); +} + + //--------------------------------------------------------------------+ // Stream Write //--------------------------------------------------------------------+ diff --git a/src/tusb.c b/src/tusb.c index b308e2915..df33f2680 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -354,8 +354,8 @@ bool tu_edpt_stream_init(tu_edpt_stream_t* s, bool is_host, bool is_tx, bool ove return true; } -bool tu_edpt_stream_deinit(tu_edpt_stream_t* s) { - (void) s; +bool tu_edpt_stream_deinit(tu_edpt_stream_t *s) { + (void)s; #if OSAL_MUTEX_REQUIRED if (s->ff.mutex_wr) { osal_mutex_delete(s->ff.mutex_wr); @@ -363,7 +363,7 @@ bool tu_edpt_stream_deinit(tu_edpt_stream_t* s) { if (s->ff.mutex_rd) { osal_mutex_delete(s->ff.mutex_rd); } -#endif + #endif return true; } @@ -412,7 +412,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool stream_release(uint8_t hwid, tu_edpt_st bool tu_edpt_stream_write_zlp_if_needed(uint8_t hwid, tu_edpt_stream_t* s, uint32_t last_xferred_bytes) { // ZLP condition: no pending data, last transferred bytes is multiple of packet size const uint16_t mps = s->is_mps512 ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS; - TU_VERIFY(!tu_fifo_count(&s->ff) && last_xferred_bytes > 0 && (0 == (last_xferred_bytes & (mps - 1)))); + TU_VERIFY(tu_fifo_empty(&s->ff) && last_xferred_bytes > 0 && (0 == (last_xferred_bytes & (mps - 1)))); TU_VERIFY(stream_claim(hwid, s)); TU_ASSERT(stream_xfer(hwid, s, 0)); return true; -- cgit v1.3.1 From aac7ad1eb682a86a5b67e638f9b91a5c2743d2f1 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 13 Nov 2025 13:56:02 +0700 Subject: cdc device tx_persistent for dual host info to help with hil test --- .clang-format | 1 + examples/dual/host_info_to_device_cdc/src/main.c | 10 +++------- 2 files changed, 4 insertions(+), 7 deletions(-) (limited to 'examples') diff --git a/.clang-format b/.clang-format index 40d40f7e9..f15c26c9e 100644 --- a/.clang-format +++ b/.clang-format @@ -65,6 +65,7 @@ ContinuationIndentWidth: 2 ColumnLimit: 120 ConstructorInitializerAllOnOneLineOrOnePerLine: false Cpp11BracedListStyle: true +IncludeBlocks: Preserve IncludeCategories: - Regex: '^<.*' Priority: 1 diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 03a1ac3d8..46e1d1ab2 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -106,6 +106,9 @@ static void usb_device_init(void) { .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUD_RHPORT, &dev_init); + tud_cdc_configure_t cdc_cfg = TUD_CDC_CONFIGURE_DEFAULT(); + cdc_cfg.tx_persistent = true; + tud_cdc_configure(&cdc_cfg); board_init_after_tusb(); } @@ -206,13 +209,6 @@ void tud_resume_cb(void) { } void cdc_task(void) { - if (!tud_cdc_connected()) { - // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. - // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop - tusb_time_delay_ms_api(20); - return; - } - for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { if (tuh_mounted(daddr)) { if (is_print[daddr]) { -- cgit v1.3.1 From c9a9e94ae554c3d545b5eb795f81fa9216a93e4f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 13 Nov 2025 14:34:17 +0700 Subject: tweak to dual host info device cdc to make it easier to pass hil test --- examples/dual/host_info_to_device_cdc/src/main.c | 24 +++++++++++++++++----- .../dual/host_info_to_device_cdc/src/tusb_config.h | 2 +- 2 files changed, 20 insertions(+), 6 deletions(-) (limited to 'examples') diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 46e1d1ab2..00d059b66 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -69,7 +69,7 @@ enum { static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; -static bool is_print[CFG_TUH_DEVICE_MAX+1] = { 0 }; +static bool is_printable[CFG_TUH_DEVICE_MAX + 1] = {0}; static tusb_desc_device_t descriptor_device[CFG_TUH_DEVICE_MAX+1]; static void print_utf16(uint16_t *temp_buf, size_t buf_len); @@ -108,6 +108,7 @@ static void usb_device_init(void) { tusb_init(BOARD_TUD_RHPORT, &dev_init); tud_cdc_configure_t cdc_cfg = TUD_CDC_CONFIGURE_DEFAULT(); cdc_cfg.tx_persistent = true; + cdc_cfg.tx_overwritabe_if_not_connected = false; tud_cdc_configure(&cdc_cfg); board_init_after_tusb(); } @@ -209,10 +210,23 @@ void tud_resume_cb(void) { } void cdc_task(void) { + static uint32_t connected_ms = 0; + + if (!tud_cdc_connected()) { + connected_ms = board_millis(); + return; + } + + // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. + // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop + if (board_millis() - connected_ms < 100) { + return; // wait for stable connection + } + for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { if (tuh_mounted(daddr)) { - if (is_print[daddr]) { - is_print[daddr] = false; + if (is_printable[daddr]) { + is_printable[daddr] = false; print_device_info(daddr, &descriptor_device[daddr]); tud_cdc_write_flush(); } @@ -279,13 +293,13 @@ void tuh_enum_descriptor_device_cb(uint8_t daddr, tusb_desc_device_t const* desc void tuh_mount_cb(uint8_t daddr) { cdc_printf("mounted device %u\r\n", daddr); tud_cdc_write_flush(); - is_print[daddr] = true; + is_printable[daddr] = true; } void tuh_umount_cb(uint8_t daddr) { cdc_printf("unmounted device %u\r\n", daddr); tud_cdc_write_flush(); - is_print[daddr] = false; + is_printable[daddr] = false; } //--------------------------------------------------------------------+ diff --git a/examples/dual/host_info_to_device_cdc/src/tusb_config.h b/examples/dual/host_info_to_device_cdc/src/tusb_config.h index bb47fbf4a..601c27dae 100644 --- a/examples/dual/host_info_to_device_cdc/src/tusb_config.h +++ b/examples/dual/host_info_to_device_cdc/src/tusb_config.h @@ -112,7 +112,7 @@ // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) -#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 256) // CDC Endpoint transfer buffer size, more is faster #define CFG_TUD_CDC_EP_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) -- cgit v1.3.1