From 1ef820ecfe569e181b8f20cb936f632e51d8257e Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Tue, 23 May 2023 21:45:00 +0700 Subject: Enhance chipidea (#2075) * update chipidea dcd, remove manual ep_count and use DCCPARAMS to get number of endpoint instead * add dcd dcache for chipidea * add cmake for lpc18 * add makefile build for mcx * use fork of mcu sdk * fix ci build with nrf * flash rp2040 with openocd --- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 166 ++++++++++++++ hw/bsp/mcx/boards/mcxn947brk/board.cmake | 18 ++ hw/bsp/mcx/boards/mcxn947brk/board.h | 66 ++++++ hw/bsp/mcx/boards/mcxn947brk/board.mk | 11 + hw/bsp/mcx/boards/mcxn947brk/clock_config.c | 338 ++++++++++++++++++++++++++++ hw/bsp/mcx/boards/mcxn947brk/clock_config.h | 177 +++++++++++++++ hw/bsp/mcx/boards/mcxn947brk/pin_mux.c | 141 ++++++++++++ hw/bsp/mcx/boards/mcxn947brk/pin_mux.h | 51 +++++ hw/bsp/mcx/family.c | 262 +++++++++++++++++++++ hw/bsp/mcx/family.cmake | 179 +++++++++++++++ hw/bsp/mcx/family.mk | 48 ++++ 11 files changed, 1457 insertions(+) create mode 100644 hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/mcx/boards/mcxn947brk/board.cmake create mode 100644 hw/bsp/mcx/boards/mcxn947brk/board.h create mode 100644 hw/bsp/mcx/boards/mcxn947brk/board.mk create mode 100644 hw/bsp/mcx/boards/mcxn947brk/clock_config.c create mode 100644 hw/bsp/mcx/boards/mcxn947brk/clock_config.h create mode 100644 hw/bsp/mcx/boards/mcxn947brk/pin_mux.c create mode 100644 hw/bsp/mcx/boards/mcxn947brk/pin_mux.h create mode 100644 hw/bsp/mcx/family.c create mode 100644 hw/bsp/mcx/family.cmake create mode 100644 hw/bsp/mcx/family.mk (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..4c6058d27 --- /dev/null +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,166 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// IAR assembler have limited preprocessor support and it only need following macros: +#ifndef __IASMARM__ +// FIXME cause redundant-decls warnings +extern uint32_t SystemCoreClock; +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; + CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); + CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); + + /*According to reference manual, device mode setting has to be set by access usb host register */ + CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock + USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; + CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock + + /* enable USB Device clock */ + CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); +#endif + +#if PORT_SUPPORT_DEVICE(1) + // Port1 is High Speed + + // Power + SPC0->ACTIVE_VDELAY = 0x0500; + /* Change the power DCDC to 1.8v (By default, DCDC is 1.8V), CORELDO to 1.1v (By default, CORELDO is 1.0V) */ + SPC0->ACTIVE_CFG &= ~SPC_ACTIVE_CFG_CORELDO_VDD_DS_MASK; + SPC0->ACTIVE_CFG |= SPC_ACTIVE_CFG_DCDC_VDD_LVL(0x3) | SPC_ACTIVE_CFG_CORELDO_VDD_LVL(0x3) | + SPC_ACTIVE_CFG_SYSLDO_VDD_DS_MASK | SPC_ACTIVE_CFG_DCDC_VDD_DS(0x2u); + /* Wait until it is done */ + while (SPC0->SC & SPC_SC_BUSY_MASK) {} + if (0u == (SCG0->LDOCSR & SCG_LDOCSR_LDOEN_MASK)) { + SCG0->TRIM_LOCK = 0x5a5a0001U; + SCG0->LDOCSR |= SCG_LDOCSR_LDOEN_MASK; + /* wait LDO ready */ + while (0U == (SCG0->LDOCSR & SCG_LDOCSR_VOUT_OK_MASK)); + } + SYSCON->AHBCLKCTRLSET[2] |= SYSCON_AHBCLKCTRL2_USB_HS_MASK | SYSCON_AHBCLKCTRL2_USB_HS_PHY_MASK; + SCG0->SOSCCFG &= ~(SCG_SOSCCFG_RANGE_MASK | SCG_SOSCCFG_EREFS_MASK); + /* xtal = 20 ~ 30MHz */ + SCG0->SOSCCFG = (1U << SCG_SOSCCFG_RANGE_SHIFT) | (1U << SCG_SOSCCFG_EREFS_SHIFT); + SCG0->SOSCCSR |= SCG_SOSCCSR_SOSCEN_MASK; + while (1) { + if (SCG0->SOSCCSR & SCG_SOSCCSR_SOSCVLD_MASK) { + break; + } + } + + // Clock + SYSCON->CLOCK_CTRL |= SYSCON_CLOCK_CTRL_CLKIN_ENA_MASK | SYSCON_CLOCK_CTRL_CLKIN_ENA_FM_USBH_LPT_MASK; + CLOCK_EnableClock(kCLOCK_UsbHs); + CLOCK_EnableClock(kCLOCK_UsbHsPhy); + CLOCK_EnableUsbhsPhyPllClock(kCLOCK_Usbphy480M, 24000000U); + CLOCK_EnableUsbhsClock(); + + // USB PHY +#if ((!(defined FSL_FEATURE_SOC_CCM_ANALOG_COUNT)) && (!(defined FSL_FEATURE_SOC_ANATOP_COUNT))) + USBPHY->TRIM_OVERRIDE_EN = 0x001fU; /* override IFR value */ +#endif + + // Enable PHY support for Low speed device + LS via FS Hub + USBPHY->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + USBPHY->PWD = 0; + + // TX Timing + uint32_t phytx = USBPHY->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x04) | USBPHY_TX_TXCAL45DP(0x07) | USBPHY_TX_TXCAL45DM(0x07); + //phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + USBPHY->TX = phytx; +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); + +#ifdef NEOPIXEL_PIN + if (state) { + sctpix_setPixel(NEOPIXEL_CH, 0, 0x100000); + sctpix_setPixel(NEOPIXEL_CH, 1, 0x101010); + } else { + sctpix_setPixel(NEOPIXEL_CH, 0, 0x001000); + sctpix_setPixel(NEOPIXEL_CH, 1, 0x000010); + } + sctpix_show(); +#endif +} + +uint32_t board_button_read(void) +{ +#ifdef BUTTON_GPIO + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +#endif +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ +#ifdef UART_DEV + LPUART_WriteBlocking(UART_DEV, (uint8_t const *) buf, len); + return len; +#else + (void) buf; (void) len; + return 0; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake new file mode 100644 index 000000000..e4bc11be5 --- /dev/null +++ b/hw/bsp/mcx/family.cmake @@ -0,0 +1,179 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +# TOP is path to root directory +set(TOP ${CMAKE_CURRENT_LIST_DIR}/../../..) +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS LPC55XX CACHE INTERNAL "") + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +set(BOARD_TARGET board_${BOARD}) +if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + # external driver + #lib/sct_neopixel/sct_neopixel.c + + # driver + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ) +# target_compile_definitions(${BOARD_TARGET} PUBLIC +# ) + target_include_directories(${BOARD_TARGET} PUBLIC + # driver + # mcu + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ) + update_board(${BOARD_TARGET}) + + if (TOOLCHAIN STREQUAL "gcc") + target_sources(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S + ) + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld" + # link map + "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + else () + # TODO support IAR + endif () +endif () # BOARD_TARGET + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_target TARGET) + # set output name to .elf + set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + + # run size after build + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${TOOLCHAIN_SIZE} $ + ) + + # TOP is path to root directory + set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # TinyUSB Port + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + #---------- TinyUSB ---------- + # tinyusb target is built for each example since it depends on example's tusb_config.h + set(TINYUSB_TARGET_PREFIX ${TARGET}-) + add_library(${TARGET}-tinyusb_config INTERFACE) + + target_include_directories(${TARGET}-tinyusb_config INTERFACE + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_MCU=OPT_MCU_MCXN9 + ) + + # tinyusb's CMakeList.txt + add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + + # group target (not yet supported by clion) + set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config + PROPERTIES FOLDER ${TARGET}_sub + ) + + #---------- Flash ---------- + # use MCUXpresso GUI Flash Tool to flash the elf + +# set(REDLINK_EXE /usr/local/LinkServer/binaries/crt_emu_cm_redlink) +# add_custom_target(${TARGET}-redlink +# DEPENDS ${TARGET} +# COMMAND ${REDLINK_EXE} --flash-load-exec $ --vendor NXP -p MCXN947 --bootromstall +# 0x50000040 -CoreIndex=0 --flash-driver= -x ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/flash --flash-dir +# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/flash --flash-hashing +# ) + + #family_flash_jlink(${TARGET}) + #family_flash_nxplink(${TARGET}) + #family_flash_pyocd(${TARGET}) +endfunction() + + +function(family_add_freertos TARGET) + # freertos_config + if (NOT TARGET freertos_config) + add_library(freertos_config INTERFACE) + target_include_directories(freertos_config SYSTEM INTERFACE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig + ) + endif() + + ## freertos + if (NOT TARGET freertos_kernel) + add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../../lib/FreeRTOS-Kernel ${CMAKE_CURRENT_BINARY_DIR}/freertos_kernel) + endif () + + # Add FreeRTOS option to tinyusb_config + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_OS=OPT_OS_FREERTOS + ) + # link tinyusb with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel + ) + target_link_libraries(${TARGET} PUBLIC + freertos_kernel + ) +endfunction() + +function(family_configure_device_example TARGET) + family_configure_target(${TARGET}) +endfunction() + +function(family_configure_host_example TARGET) + family_configure_target(${TARGET}) +endfunction() + +function(family_configure_dual_usb_example TARGET) + family_configure_target(${TARGET}) +endfunction() diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk new file mode 100644 index 000000000..2cd4c2448 --- /dev/null +++ b/hw/bsp/mcx/family.mk @@ -0,0 +1,48 @@ +UF2_FAMILY_ID = 0x2abc77ec +SDK_DIR = hw/mcu/nxp/mcux-sdk + +DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 + +include $(TOP)/$(BOARD_PATH)/board.mk + +CPU_CORE ?= cortex-m33 +include $(TOP)/tools/make/cpu/$(CPU_CORE).mk + +# Default to Highspeed PORT1 +PORT ?= 1 + +CFLAGS += \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ + -DBOARD_TUD_RHPORT=$(PORT) \ + +ifeq ($(PORT), 1) + $(info "PORT1 High Speed") + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED +else + $(info "PORT0 Full Speed") +endif + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration + +# All source paths should be relative to the top level. +LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld + +SRC_C += \ + src/portable/chipidea/ci_hs/dcd_ci_hs.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/system_$(MCU_CORE).c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_gpio.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_common_arm.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpflexcomm.c \ + $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpuart.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT) \ + $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers \ + +SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S -- cgit v1.3.1 From 5fea010406747a94f3a65a89e65e7956ff811b3c Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 May 2023 17:27:05 +0700 Subject: add family_support_configure_common() --- hw/bsp/family_support.cmake | 16 ++++++++++++++++ hw/bsp/imxrt/family.cmake | 20 +++++--------------- hw/bsp/lpc18/family.cmake | 16 +++++----------- hw/bsp/lpc55/family.cmake | 16 +++++----------- hw/bsp/mcx/family.cmake | 22 ++++++---------------- hw/bsp/nrf/family.cmake | 23 +++++------------------ 6 files changed, 42 insertions(+), 71 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d2d675332..760f2fbbc 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -136,6 +136,22 @@ function(family_add_default_example_warnings TARGET) endfunction() +function(family_support_configure_common TARGET) + # set output name to .elf + set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + + # run size after build + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${TOOLCHAIN_SIZE} $ + ) + + # Generate map file + target_link_options(${TARGET} PUBLIC + # link map + "LINKER:-Map=$.map" + ) +endfunction() + # add_custom_command(TARGET ${TARGET} POST_BUILD # COMMAND ${CMAKE_OBJCOPY} -O ihex $ ${TARGET}.hex # COMMAND ${CMAKE_OBJCOPY} -O binary $ ${TARGET}.bin diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index ade744aa5..0e55b825d 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -63,7 +63,6 @@ if (NOT TARGET ${BOARD_TARGET}) ) target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_gcc}" - "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" # nanolib --specs=nosys.specs --specs=nano.specs @@ -79,17 +78,8 @@ endif () # BOARD_TARGET #------------------------------------ # Functions #------------------------------------ -function(family_configure_target TARGET) - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) - - # run size after build - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${TOOLCHAIN_SIZE} $ - ) - - # TOP is path to root directory - set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") +function(family_configure_example TARGET) + family_support_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -162,13 +152,13 @@ function(family_add_freertos TARGET) endfunction() function(family_configure_device_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_host_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_dual_usb_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 059408fe9..29fa73d34 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -65,14 +65,8 @@ endif () # BOARD_TARGET #------------------------------------ # Functions #------------------------------------ -function(family_configure_target TARGET) - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) - - # run size after build - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${TOOLCHAIN_SIZE} $ - ) +function(family_configure_example TARGET) + family_support_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -143,13 +137,13 @@ function(family_add_freertos TARGET) endfunction() function(family_configure_device_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_host_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_dual_usb_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 3aeda5b2d..363b7a9cd 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -63,8 +63,6 @@ if (NOT TARGET ${BOARD_TARGET}) target_link_options(${BOARD_TARGET} PUBLIC # linker file "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld" - # link map - "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" # nanolib --specs=nosys.specs --specs=nano.specs @@ -77,12 +75,8 @@ endif () # BOARD_TARGET #------------------------------------ # Functions #------------------------------------ -function(family_configure_target TARGET) - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) - - # TOP is path to root directory - set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") +function(family_configure_example TARGET) + family_support_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -153,13 +147,13 @@ function(family_add_freertos TARGET) endfunction() function(family_configure_device_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_host_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_dual_usb_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index e4bc11be5..bc0dfe875 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -54,11 +54,10 @@ if (NOT TARGET ${BOARD_TARGET}) target_sources(${BOARD_TARGET} PUBLIC ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S ) + cmake_print_variables(CMAKE_CURRENT_BINARY_DIR) target_link_options(${BOARD_TARGET} PUBLIC # linker file "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld" - # link map - "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" # nanolib --specs=nosys.specs --specs=nano.specs @@ -71,17 +70,8 @@ endif () # BOARD_TARGET #------------------------------------ # Functions #------------------------------------ -function(family_configure_target TARGET) - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) - - # run size after build - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${TOOLCHAIN_SIZE} $ - ) - - # TOP is path to root directory - set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") +function(family_configure_example TARGET) + family_support_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -167,13 +157,13 @@ function(family_add_freertos TARGET) endfunction() function(family_configure_device_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_host_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_dual_usb_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 1156a171b..9d958fee2 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -65,8 +65,6 @@ if (NOT TARGET ${BOARD_TARGET}) # linker file "LINKER:--script=${LD_FILE_gcc}" -L${NRFX_DIR}/mdk - # link map - "LINKER:-Map=$>,$,$>${CMAKE_EXECUTABLE_SUFFIX}.map" # nanolib --specs=nosys.specs --specs=nano.specs @@ -79,19 +77,8 @@ endif () # BOARD_TARGET #------------------------------------ # Functions #------------------------------------ -function(family_configure_target TARGET) - #family_add_default_example_warnings(${TARGET}) - - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) - - # run size after build - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${TOOLCHAIN_SIZE} $ - ) - - # TOP is path to root directory - set(TOP "${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../..") +function(family_configure_example TARGET) + family_support_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -161,13 +148,13 @@ function(family_add_freertos TARGET) endfunction() function(family_configure_device_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_host_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() function(family_configure_dual_usb_example TARGET) - family_configure_target(${TARGET}) + family_configure_example(${TARGET}) endfunction() -- cgit v1.3.1 From 4c9605910f1f53b2517fff5f0cc02973260f0739 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 May 2023 21:27:26 +0700 Subject: update cmake with freertos --- hw/bsp/family_support.cmake | 89 ++++++++------ hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt | 8 -- hw/bsp/imxrt/family.cmake | 23 +--- hw/bsp/lpc18/family.cmake | 23 +--- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 166 +++++++++++++++++++++++++++ hw/bsp/lpc55/family.cmake | 33 ++---- hw/bsp/mcx/family.cmake | 28 +---- hw/bsp/nrf/family.cmake | 24 +--- hw/bsp/rp2040/family.cmake | 4 + 9 files changed, 242 insertions(+), 156 deletions(-) delete mode 100644 hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt create mode 100644 hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 760f2fbbc..5bd9a6d75 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -1,19 +1,15 @@ -if (TARGET _family_support_marker) - return() -endif () - -add_library(_family_support_marker INTERFACE) +include_guard() include(CMakePrintHelpers) # Default to gcc -if(NOT DEFINED TOOLCHAIN) +if (NOT DEFINED TOOLCHAIN) set(TOOLCHAIN gcc) -endif() +endif () if (NOT FAMILY) message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the cmake command line") -endif() +endif () if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") @@ -137,19 +133,19 @@ endfunction() function(family_support_configure_common TARGET) - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) - - # run size after build - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${TOOLCHAIN_SIZE} $ - ) - - # Generate map file - target_link_options(${TARGET} PUBLIC - # link map - "LINKER:-Map=$.map" - ) + # set output name to .elf + set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) + + # run size after build + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${TOOLCHAIN_SIZE} $ + ) + + # Generate map file + target_link_options(${TARGET} PUBLIC + # link map + "LINKER:-Map=$.map" + ) endfunction() # add_custom_command(TARGET ${TARGET} POST_BUILD @@ -160,23 +156,23 @@ endfunction() # Add flash jlink target function(family_flash_jlink TARGET) - if (NOT DEFINED JLINKEXE) - set(JLINKEXE JLinkExe) - endif () + if (NOT DEFINED JLINKEXE) + set(JLINKEXE JLinkExe) + endif () - file(GENERATE - OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink - CONTENT "halt + file(GENERATE + OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink + CONTENT "halt loadfile $ r go exit" - ) + ) - add_custom_target(${TARGET}-jlink - DEPENDS ${TARGET} - COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink - ) + add_custom_target(${TARGET}-jlink + DEPENDS ${TARGET} + COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile ${CMAKE_CURRENT_BINARY_DIR}/${TARGET}.jlink + ) endfunction() # Add flash pycod target @@ -218,6 +214,35 @@ function(family_configure_host_example TARGET) # default implementation is empty, the function should be redefined in the FAMILY/family.cmake endfunction() +# Add freeRTOS support to example, can be overridden by FAMILY/family.cmake +function(family_add_freertos TARGET) + # freeros config + if (NOT TARGET freertos_config) + add_library(freertos_config INTERFACE) + target_include_directories(freertos_config SYSTEM INTERFACE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig + ) + endif() + + # freertos kernel should be generic as freertos_config however, CMAKE complains with missing variable + # such as CMAKE_C_COMPILE_OBJECT + if (NOT TARGET freertos_kernel) + add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) + endif () + + # Add FreeRTOS option to tinyusb_config + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_OS=OPT_OS_FREERTOS + ) + # link tinyusb with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel + ) + target_link_libraries(${TARGET} PUBLIC + freertos_kernel + ) +endfunction() + include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) if (NOT FAMILY_MCUS) diff --git a/hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt b/hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt deleted file mode 100644 index 0bacaf824..000000000 --- a/hw/bsp/imxrt/FreeRTOSConfig/CMakeLists.txt +++ /dev/null @@ -1,8 +0,0 @@ -if (NOT TARGET freertos_config) - add_library(freertos_config INTERFACE) - - # add path to FreeRTOSConfig.h - target_include_directories(freertos_config SYSTEM INTERFACE - ${CMAKE_CURRENT_LIST_DIR} - ) -endif() diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 0e55b825d..f9818cde6 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -75,6 +75,7 @@ if (NOT TARGET ${BOARD_TARGET}) endif () endif () # BOARD_TARGET + #------------------------------------ # Functions #------------------------------------ @@ -129,28 +130,6 @@ function(family_configure_example TARGET) endfunction() -function(family_add_freertos TARGET) - # freertos_config - add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig ${CMAKE_CURRENT_BINARY_DIR}/freertos_config) - - ## freertos - if (NOT TARGET freertos_kernel) - add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../../lib/FreeRTOS-Kernel ${CMAKE_CURRENT_BINARY_DIR}/freertos_kernel) - endif () - - # Add FreeRTOS option to tinyusb_config - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_OS=OPT_OS_FREERTOS - ) - # link tinyusb with freeRTOS kernel - target_link_libraries(${TARGET}-tinyusb PUBLIC - freertos_kernel - ) - target_link_libraries(${TARGET} PUBLIC - freertos_kernel - ) -endfunction() - function(family_configure_device_example TARGET) family_configure_example(${TARGET}) endfunction() diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 29fa73d34..c47839a5c 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -62,6 +62,7 @@ if (NOT TARGET ${BOARD_TARGET}) endif () endif () # BOARD_TARGET + #------------------------------------ # Functions #------------------------------------ @@ -114,28 +115,6 @@ function(family_configure_example TARGET) endfunction() -function(family_add_freertos TARGET) - # freertos_config - add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/FreeRTOSConfig ${CMAKE_CURRENT_BINARY_DIR}/freertos_config) - - ## freertos - if (NOT TARGET freertos_kernel) - add_subdirectory(${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../../lib/FreeRTOS-Kernel ${CMAKE_CURRENT_BINARY_DIR}/freertos_kernel) - endif () - - # Add FreeRTOS option to tinyusb_config - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_OS=OPT_OS_FREERTOS - ) - # link tinyusb with freeRTOS kernel - target_link_libraries(${TARGET}-tinyusb PUBLIC - freertos_kernel - ) - target_link_libraries(${TARGET} PUBLIC - freertos_kernel - ) -endfunction() - function(family_configure_device_example TARGET) family_configure_example(${TARGET}) endfunction() diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..4c6058d27 --- /dev/null +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,166 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// IAR assembler have limited preprocessor support and it only need following macros: +#ifndef __IASMARM__ +// FIXME cause redundant-decls warnings +extern uint32_t SystemCoreClock; +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< Date: Fri, 26 May 2023 14:56:22 +0700 Subject: move set TOP to family_support.cmake --- hw/bsp/family_support.cmake | 3 +++ hw/bsp/imxrt/family.cmake | 3 --- hw/bsp/lpc18/family.cmake | 2 -- hw/bsp/lpc55/family.cmake | 2 -- hw/bsp/mcx/family.cmake | 2 -- hw/bsp/nrf/family.cmake | 2 -- hw/bsp/rp2040/family.cmake | 4 ++-- 7 files changed, 5 insertions(+), 13 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 5bd9a6d75..68a21bc7d 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -2,6 +2,9 @@ include_guard() include(CMakePrintHelpers) +# TOP is path to root directory +set(TOP "${CMAKE_CURRENT_LIST_DIR}/../..") + # Default to gcc if (NOT DEFINED TOOLCHAIN) set(TOOLCHAIN gcc) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index f9818cde6..a681b0419 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -4,9 +4,6 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -# TOP is path to root directory -set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") - # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index c47839a5c..698120077 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -4,8 +4,6 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -# TOP is path to root directory -set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx) # toolchain set up diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index d6ce0b781..1b9c1a655 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -4,8 +4,6 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -# TOP is path to root directory -set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index abca7c90e..1719320e6 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -4,8 +4,6 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -# TOP is path to root directory -set(TOP ${CMAKE_CURRENT_LIST_DIR}/../../..) set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 59d4a7947..68b19b33b 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -4,8 +4,6 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -# TOP is path to root directory -set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") set(NRFX_DIR ${TOP}/hw/mcu/nordic/nrfx) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 17f206c77..28637e3ee 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -16,8 +16,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # TOP is absolute path to root directory of TinyUSB git repo - set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") - get_filename_component(TOP "${TOP}" REALPATH) + #set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..") + #get_filename_component(TOP "${TOP}" REALPATH) if (NOT PICO_TINYUSB_PATH) set(PICO_TINYUSB_PATH ${TOP}) -- cgit v1.3.1 From 7ac85d08c7aa59f35cbbf2657dd9be68d46e1fdc Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 26 May 2023 16:37:47 +0700 Subject: move lpc18 and rp2040 to cmake workflow since rp2040 often failed randomly with make --- .github/workflows/build_arm.yml | 3 +- .github/workflows/cmake_arm.yml | 19 ++- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 8 +- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 166 +++++++++++++++++++++ hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 8 +- hw/bsp/lpc55/boards/double_m33_express/board.cmake | 16 ++ hw/bsp/lpc55/family.cmake | 14 +- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 8 +- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 166 +++++++++++++++++++++ hw/bsp/saml2x/family.mk | 4 +- src/CMakeLists.txt | 47 ++++-- tools/get_deps.py | 4 +- 12 files changed, 429 insertions(+), 34 deletions(-) create mode 100644 hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/lpc55/boards/double_m33_express/board.cmake create mode 100644 hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h (limited to 'hw/bsp/mcx') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 8fbaba4c6..42c8eb7ce 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -35,12 +35,11 @@ jobs: # Alphabetical order - 'broadcom_32bit' - 'kinetis_k32l kinetis_kl' - - 'lpc11 lpc13 lpc15 lpc17 lpc18' + - 'lpc11 lpc13 lpc15 lpc17' - 'lpc51 lpc54 lpc55' - 'mm32 msp432e4' - 'nrf' - 'ra' - - 'rp2040' - 'samd11 samd21' - 'samd51 same5x' - 'saml2x' diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index e7991252d..f3989f239 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -32,9 +32,11 @@ jobs: fail-fast: false matrix: family: - # Alphabetical order - - 'mcx' - - 'imxrt' + # Alphabetical order + - 'lpc18' + - 'mcx' + - 'imxrt' + - 'rp2040' steps: - name: Setup Python uses: actions/setup-python@v4 @@ -52,8 +54,19 @@ jobs: - name: Checkout TinyUSB uses: actions/checkout@v3 + - name: Checkout pico-sdk for rp2040 + if: matrix.family == 'rp2040' + uses: actions/checkout@v3 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + - name: Get Dependencies run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build run: python tools/build_cmake.py ${{ matrix.family }} + env: + # for rp2040, there is no harm if defined for other families + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index c8d94f9ed..c1928fbcd 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -49,10 +49,10 @@ extern uint32_t SystemCoreClock; #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE ( 1024 ) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..323c1a0a4 --- /dev/null +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,166 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// IAR assembler have limited preprocessor support and it only need following macros: +#ifndef __IASMARM__ +// FIXME cause redundant-decls warnings +extern uint32_t SystemCoreClock; +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< Date: Thu, 1 Jun 2023 12:36:08 +0700 Subject: add lto for cmake --- hw/bsp/family_support.cmake | 316 ++++++++++++++++--------------- hw/bsp/imxrt/family.cmake | 5 +- hw/bsp/lpc18/family.cmake | 5 +- hw/bsp/lpc55/family.cmake | 2 +- hw/bsp/mcx/boards/mcxn947brk/board.cmake | 2 +- hw/bsp/mcx/family.cmake | 17 +- hw/bsp/nrf/family.cmake | 5 +- tools/cmake/cpu/cortex-m33.cmake | 1 - tools/cmake/toolchain/arm_gcc.cmake | 8 +- tools/cmake/toolchain/set_flags.cmake | 28 +-- 10 files changed, 203 insertions(+), 186 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 68a21bc7d..e3f2f45ff 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -7,141 +7,145 @@ set(TOP "${CMAKE_CURRENT_LIST_DIR}/../..") # Default to gcc if (NOT DEFINED TOOLCHAIN) - set(TOOLCHAIN gcc) + set(TOOLCHAIN gcc) endif () if (NOT FAMILY) - message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the cmake command line") + message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the cmake command line") endif () if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) - message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") + message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") endif() + function(family_filter RESULT DIR) - get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) - - if (EXISTS "${DIR}/only.txt") - file(READ "${DIR}/only.txt" ONLYS) - # Replace newlines with semicolon so that it is treated as a list by CMake - string(REPLACE "\n" ";" ONLYS_LINES ${ONLYS}) - # For each mcu - foreach(MCU IN LISTS FAMILY_MCUS) - # For each line in only.txt - foreach(_line ${ONLYS_LINES}) - # If mcu:xxx exists for this mcu or board:xxx then include - if (${_line} STREQUAL "mcu:${MCU}" OR ${_line} STREQUAL "board:${BOARD}") - set(${RESULT} 1 PARENT_SCOPE) - return() - endif() - endforeach() - endforeach() - - # Didn't find it in only file so don't build - set(${RESULT} 0 PARENT_SCOPE) - - elseif (EXISTS "${DIR}/skip.txt") - file(READ "${DIR}/skip.txt" SKIPS) - # Replace newlines with semicolon so that it is treated as a list by CMake - string(REPLACE "\n" ";" SKIPS_LINES ${SKIPS}) - # For each mcu - foreach(MCU IN LISTS FAMILY_MCUS) - # For each line in only.txt - foreach(_line ${SKIPS_LINES}) - # If mcu:xxx exists for this mcu then skip - if (${_line} STREQUAL "mcu:${MCU}") - set(${RESULT} 0 PARENT_SCOPE) - return() - endif() - endforeach() - endforeach() - - # Didn't find in skip file so build - set(${RESULT} 1 PARENT_SCOPE) - - else() - - # Didn't find skip or only file so build - set(${RESULT} 1 PARENT_SCOPE) + get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) + + if (EXISTS "${DIR}/only.txt") + file(READ "${DIR}/only.txt" ONLYS) + # Replace newlines with semicolon so that it is treated as a list by CMake + string(REPLACE "\n" ";" ONLYS_LINES ${ONLYS}) + + # For each mcu + foreach(MCU IN LISTS FAMILY_MCUS) + # For each line in only.txt + foreach(_line ${ONLYS_LINES}) + # If mcu:xxx exists for this mcu or board:xxx then include + if (${_line} STREQUAL "mcu:${MCU}" OR ${_line} STREQUAL "board:${BOARD}") + set(${RESULT} 1 PARENT_SCOPE) + return() + endif() + endforeach() + endforeach() + + # Didn't find it in only file so don't build + set(${RESULT} 0 PARENT_SCOPE) + + elseif (EXISTS "${DIR}/skip.txt") + file(READ "${DIR}/skip.txt" SKIPS) + # Replace newlines with semicolon so that it is treated as a list by CMake + string(REPLACE "\n" ";" SKIPS_LINES ${SKIPS}) + + # For each mcu + foreach(MCU IN LISTS FAMILY_MCUS) + # For each line in only.txt + foreach(_line ${SKIPS_LINES}) + # If mcu:xxx exists for this mcu then skip + if (${_line} STREQUAL "mcu:${MCU}") + set(${RESULT} 0 PARENT_SCOPE) + return() + endif() + endforeach() + endforeach() - endif() + # Didn't find in skip file so build + set(${RESULT} 1 PARENT_SCOPE) + else() + # Didn't find skip or only file so build + set(${RESULT} 1 PARENT_SCOPE) + endif() endfunction() + function(family_add_subdirectory DIR) - family_filter(SHOULD_ADD "${DIR}") - if (SHOULD_ADD) - add_subdirectory(${DIR}) - endif() + family_filter(SHOULD_ADD "${DIR}") + if (SHOULD_ADD) + add_subdirectory(${DIR}) + endif() endfunction() + function(family_get_project_name OUTPUT_NAME DIR) - get_filename_component(SHORT_NAME ${DIR} NAME) - set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) + get_filename_component(SHORT_NAME ${DIR} NAME) + set(${OUTPUT_NAME} ${TINYUSB_FAMILY_PROJECT_NAME_PREFIX}${SHORT_NAME} PARENT_SCOPE) endfunction() + function(family_initialize_project PROJECT DIR) - family_filter(ALLOWED "${DIR}") - if (NOT ALLOWED) - get_filename_component(SHORT_NAME ${DIR} NAME) - message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}") - endif() + # set output suffix to .elf + set(CMAKE_EXECUTABLE_SUFFIX .elf PARENT_SCOPE) + + family_filter(ALLOWED "${DIR}") + if (NOT ALLOWED) + get_filename_component(SHORT_NAME ${DIR} NAME) + message(FATAL_ERROR "${SHORT_NAME} is not supported on FAMILY=${FAMILY}") + endif() endfunction() + function(family_add_default_example_warnings TARGET) - target_compile_options(${TARGET} PUBLIC - -Wall - -Wextra - -Werror - -Wfatal-errors - -Wdouble-promotion - -Wfloat-equal - -Wshadow - -Wwrite-strings - -Wsign-compare - -Wmissing-format-attribute - -Wunreachable-code - -Wcast-align - -Wcast-qual - -Wnull-dereference - -Wuninitialized - -Wunused - -Wredundant-decls - #-Wstrict-prototypes - #-Werror-implicit-function-declaration - #-Wundef - ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0) - target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") - endif() + target_compile_options(${TARGET} PUBLIC + -Wall + -Wextra + -Werror + -Wfatal-errors + -Wdouble-promotion + -Wfloat-equal + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wredundant-decls + #-Wstrict-prototypes + #-Werror-implicit-function-declaration + #-Wundef + ) - # GCC 10 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) - target_compile_options(${TARGET} PUBLIC -Wconversion) - endif() + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0) + target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") + endif() - # GCC 8 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) - target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) - endif() + # GCC 10 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) + target_compile_options(${TARGET} PUBLIC -Wconversion) + endif() - # GCC 6 - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) - target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) - endif() + # GCC 8 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) + target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) endif() -endfunction() + # GCC 6 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) + target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) + endif() + endif() +endfunction() -function(family_support_configure_common TARGET) - # set output name to .elf - set_target_properties(${TARGET} PROPERTIES OUTPUT_NAME ${TARGET}.elf) +function(family_configure_common TARGET) # run size after build add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${TOOLCHAIN_SIZE} $ + COMMAND ${CMAKE_SIZE} $ ) # Generate map file @@ -151,11 +155,15 @@ function(family_support_configure_common TARGET) ) endfunction() -# add_custom_command(TARGET ${TARGET} POST_BUILD -# COMMAND ${CMAKE_OBJCOPY} -O ihex $ ${TARGET}.hex -# COMMAND ${CMAKE_OBJCOPY} -O binary $ ${TARGET}.bin -# COMMENT "Creating ${TARGET}.hex and ${TARGET}.bin" -# ) + +# Add bin/hex output +function(family_add_bin_hex TARGET) + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${CMAKE_OBJCOPY} -Obinary $ $/${TARGET}.bin + COMMAND ${CMAKE_OBJCOPY} -Oihex $ $/${TARGET}.hex + VERBATIM) +endfunction() + # Add flash jlink target function(family_flash_jlink TARGET) @@ -178,78 +186,84 @@ exit" ) endfunction() + # Add flash pycod target function(family_flash_pyocd TARGET) - if (NOT DEFINED PYOC) - set(PYOCD pyocd) - endif () + if (NOT DEFINED PYOC) + set(PYOCD pyocd) + endif () - add_custom_target(${TARGET}-pyocd - DEPENDS ${TARGET} - COMMAND ${PYOCD} flash -t ${PYOCD_TARGET} $ - ) + add_custom_target(${TARGET}-pyocd + DEPENDS ${TARGET} + COMMAND ${PYOCD} flash -t ${PYOCD_TARGET} $ + ) endfunction() + # Add flash using NXP's LinkServer (redserver) # https://www.nxp.com/design/software/development-software/mcuxpresso-software-and-tools-/linkserver-for-microcontrollers:LINKERSERVER function(family_flash_nxplink TARGET) - if (NOT DEFINED LINKSERVER) - set(LINKSERVER LinkServer) - endif () + if (NOT DEFINED LINKSERVER) + set(LINKSERVER LinkServer) + endif () - # LinkServer has a bug that can only execute with full path otherwise it throws: - # realpath error: No such file or directory - execute_process(COMMAND which ${LINKSERVER} OUTPUT_VARIABLE LINKSERVER_PATH OUTPUT_STRIP_TRAILING_WHITESPACE) + # LinkServer has a bug that can only execute with full path otherwise it throws: + # realpath error: No such file or directory + execute_process(COMMAND which ${LINKSERVER} OUTPUT_VARIABLE LINKSERVER_PATH OUTPUT_STRIP_TRAILING_WHITESPACE) - add_custom_target(${TARGET}-nxplink - DEPENDS ${TARGET} - COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $ - ) + add_custom_target(${TARGET}-nxplink + DEPENDS ${TARGET} + COMMAND ${LINKSERVER_PATH} flash ${NXPLINK_DEVICE} load $ + ) endfunction() + # configure an executable target to link to tinyusb in device mode, and add the board implementation function(family_configure_device_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake + # default implementation is empty, the function should be redefined in the FAMILY/family.cmake endfunction() + # configure an executable target to link to tinyusb in host mode, and add the board implementation function(family_configure_host_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake + # default implementation is empty, the function should be redefined in the FAMILY/family.cmake endfunction() + # Add freeRTOS support to example, can be overridden by FAMILY/family.cmake function(family_add_freertos TARGET) - # freeros config - if (NOT TARGET freertos_config) - add_library(freertos_config INTERFACE) - target_include_directories(freertos_config SYSTEM INTERFACE - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig - ) - endif() + # freeros config + if (NOT TARGET freertos_config) + add_library(freertos_config INTERFACE) + target_include_directories(freertos_config SYSTEM INTERFACE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig + ) + endif() - # freertos kernel should be generic as freertos_config however, CMAKE complains with missing variable - # such as CMAKE_C_COMPILE_OBJECT - if (NOT TARGET freertos_kernel) - add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) - endif () + # freertos kernel should be generic as freertos_config however, CMAKE complains with missing variable + # such as CMAKE_C_COMPILE_OBJECT + if (NOT TARGET freertos_kernel) + add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) + endif () - # Add FreeRTOS option to tinyusb_config - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_OS=OPT_OS_FREERTOS - ) - # link tinyusb with freeRTOS kernel - target_link_libraries(${TARGET}-tinyusb PUBLIC - freertos_kernel - ) - target_link_libraries(${TARGET} PUBLIC - freertos_kernel - ) + # Add FreeRTOS option to tinyusb_config + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_OS=OPT_OS_FREERTOS + ) + # link tinyusb with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel + ) + target_link_libraries(${TARGET} PUBLIC + freertos_kernel + ) endfunction() + include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) if (NOT FAMILY_MCUS) - set(FAMILY_MCUS ${FAMILY}) + set(FAMILY_MCUS ${FAMILY}) endif() # save it in case of re-inclusion diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index a681b0419..49a4a9281 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -4,6 +4,9 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () +# enable LTO +set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) @@ -77,7 +80,7 @@ endif () # BOARD_TARGET # Functions #------------------------------------ function(family_configure_example TARGET) - family_support_configure_common(${TARGET}) + family_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 698120077..1bfc63d21 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -6,6 +6,9 @@ endif () set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx) +# enable LTO +set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) @@ -65,7 +68,7 @@ endif () # BOARD_TARGET # Functions #------------------------------------ function(family_configure_example TARGET) - family_support_configure_common(${TARGET}) + family_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 77a2b821e..eb163bde7 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -89,7 +89,7 @@ endif () # BOARD_TARGET # Functions #------------------------------------ function(family_configure_example TARGET) - family_support_configure_common(${TARGET}) + family_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.cmake b/hw/bsp/mcx/boards/mcxn947brk/board.cmake index b9acf04d9..7a210628f 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.cmake +++ b/hw/bsp/mcx/boards/mcxn947brk/board.cmake @@ -1,7 +1,7 @@ set(MCU_VARIANT MCXN947) set(MCU_CORE MCXN947_cm33_core0) -set(JLINK_DEVICE MCXN947) +set(JLINK_DEVICE MCXN947_M33_0) set(PYOCD_TARGET MCXN947) set(NXPLINK_DEVICE MCXN947:MCXN947) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 1719320e6..d5a17f584 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -7,6 +7,9 @@ endif () set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) +# enable LTO +set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) @@ -70,7 +73,7 @@ endif () # BOARD_TARGET # Functions #------------------------------------ function(family_configure_example TARGET) - family_support_configure_common(${TARGET}) + family_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -112,17 +115,7 @@ function(family_configure_example TARGET) ) #---------- Flash ---------- - # use MCUXpresso GUI Flash Tool to flash the elf - -# set(REDLINK_EXE /usr/local/LinkServer/binaries/crt_emu_cm_redlink) -# add_custom_target(${TARGET}-redlink -# DEPENDS ${TARGET} -# COMMAND ${REDLINK_EXE} --flash-load-exec $ --vendor NXP -p MCXN947 --bootromstall -# 0x50000040 -CoreIndex=0 --flash-driver= -x ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/flash --flash-dir -# ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/flash --flash-hashing -# ) - - #family_flash_jlink(${TARGET}) + family_flash_jlink(${TARGET}) #family_flash_nxplink(${TARGET}) #family_flash_pyocd(${TARGET}) endfunction() diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 68b19b33b..71067c8ae 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -10,6 +10,9 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +# enable LTO +set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) + # toolchain set up if (MCU_VARIANT STREQUAL "nrf5340_application") set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") @@ -77,7 +80,7 @@ endif () # BOARD_TARGET # Functions #------------------------------------ function(family_configure_example TARGET) - family_support_configure_common(${TARGET}) + family_configure_common(${TARGET}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h diff --git a/tools/cmake/cpu/cortex-m33.cmake b/tools/cmake/cpu/cortex-m33.cmake index 26c91a64f..fda277010 100644 --- a/tools/cmake/cpu/cortex-m33.cmake +++ b/tools/cmake/cpu/cortex-m33.cmake @@ -3,7 +3,6 @@ if (TOOLCHAIN STREQUAL "gcc") -mthumb -mcpu=cortex-m33 -mfloat-abi=hard - #-mfpu=fpv5-d16 -mfpu=fpv5-sp-d16 ) diff --git a/tools/cmake/toolchain/arm_gcc.cmake b/tools/cmake/toolchain/arm_gcc.cmake index 5f25d637b..c7f12f43a 100644 --- a/tools/cmake/toolchain/arm_gcc.cmake +++ b/tools/cmake/toolchain/arm_gcc.cmake @@ -4,9 +4,11 @@ set(CMAKE_ASM_COMPILER "arm-none-eabi-gcc") set(CMAKE_C_COMPILER "arm-none-eabi-gcc") set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") -set(TOOLCHAIN_SIZE "arm-none-eabi-size" CACHE INTERNAL "") -set(GCC_ELF2BIN "arm-none-eabi-objcopy") -set_property(GLOBAL PROPERTY ELF2BIN ${GCC_ELF2BIN}) +set(CMAKE_SIZE "arm-none-eabi-size" CACHE FILEPATH "") +set(CMAKE_OBJCOPY "arm-none-eabi-objcopy" CACHE FILEPATH "") +set(CMAKE_OBJDUMP "arm-none-eabi-objdump" CACHE FILEPATH "") + +set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) # Look for includes and libraries only in the target system prefix. set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) diff --git a/tools/cmake/toolchain/set_flags.cmake b/tools/cmake/toolchain/set_flags.cmake index 3f109b59e..6f74fe673 100644 --- a/tools/cmake/toolchain/set_flags.cmake +++ b/tools/cmake/toolchain/set_flags.cmake @@ -1,16 +1,16 @@ include(CMakePrintHelpers) -foreach(LANG IN ITEMS C CXX ASM) - # join the toolchain flags into a single string - list(APPEND TOOLCHAIN_${LANG}_FLAGS ${TOOLCHAIN_COMMON_FLAGS}) - list(JOIN TOOLCHAIN_${LANG}_FLAGS " " TOOLCHAIN_${LANG}_FLAGS) - set(CMAKE_${LANG}_FLAGS_INIT "${TOOLCHAIN_${LANG}_FLAGS}") +foreach (LANG IN ITEMS C CXX ASM) + # join the toolchain flags into a single string + list(APPEND TOOLCHAIN_${LANG}_FLAGS ${TOOLCHAIN_COMMON_FLAGS}) + list(JOIN TOOLCHAIN_${LANG}_FLAGS " " TOOLCHAIN_${LANG}_FLAGS) + set(CMAKE_${LANG}_FLAGS_INIT "${TOOLCHAIN_${LANG}_FLAGS}") - #cmake_print_variables(CMAKE_${LANG}_FLAGS_INIT) + #cmake_print_variables(CMAKE_${LANG}_FLAGS_INIT) - # optimization flags - set(CMAKE_${LANG}_FLAGS_RELEASE_INIT "-Os") - set(CMAKE_${LANG}_FLAGS_DEBUG_INIT "-O0") -endforeach() + # optimization flags for LOG, LOGGER ? + #set(CMAKE_${LANG}_FLAGS_RELEASE_INIT "-Os") + #set(CMAKE_${LANG}_FLAGS_DEBUG_INIT "-O0") +endforeach () # Linker list(JOIN TOOLCHAIN_EXE_LINKER_FLAGS " " CMAKE_EXE_LINKER_FLAGS_INIT) @@ -18,7 +18,7 @@ list(JOIN TOOLCHAIN_EXE_LINKER_FLAGS " " CMAKE_EXE_LINKER_FLAGS_INIT) # try_compile is cmake test compiling its own example, # pass -nostdlib to skip stdlib linking get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) -if(IS_IN_TRY_COMPILE) - set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") - set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") -endif() +if (IS_IN_TRY_COMPILE) + set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") + set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") +endif () -- cgit v1.3.1 From e7090c75148820ff3a4ad60c718684c46c954c18 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 2 Jun 2023 11:42:17 +0700 Subject: cmake refactor --- .github/workflows/build_arm.yml | 2 +- .github/workflows/cmake_arm.yml | 9 ++-- hw/bsp/family_support.cmake | 116 +++++++++++++++++++++++++--------------- hw/bsp/imxrt/family.cmake | 26 ++------- hw/bsp/lpc18/family.cmake | 23 ++------ hw/bsp/lpc55/family.cmake | 25 ++------- hw/bsp/mcx/family.cmake | 23 ++------ hw/bsp/nrf/family.cmake | 23 ++------ hw/bsp/stm32g0/family.cmake | 23 ++------ hw/bsp/stm32g4/family.cmake | 25 ++------- src/CMakeLists.txt | 4 ++ tools/build_cmake.py | 10 ++-- 12 files changed, 112 insertions(+), 197 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 3a2daab08..a7c7fd1e1 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -46,7 +46,7 @@ jobs: - 'stm32f0 stm32f1 stm32f2 stm32f3' - 'stm32f4' - 'stm32f7' - - 'stm32g4 stm32h7' + - 'stm32h7' - 'stm32l0 stm32l4 stm32u5 stm32wb' - 'tm4c123 xmc4000' steps: diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 2e74c304c..2ca8e32f5 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -38,6 +38,7 @@ jobs: - 'imxrt' - 'rp2040' - 'stm32g0' + - 'stm32g4' steps: - name: Setup Python uses: actions/setup-python@v4 @@ -75,11 +76,11 @@ jobs: # Upload binaries for hardware test with self-hosted - name: Prepare rp2040 Artifacts if: contains(matrix.family, 'rp2040') && github.repository_owner == 'hathach' - working-directory: ${{github.workspace}}/cmake-build-ci-raspberry_pi_pico + working-directory: ${{github.workspace}}/cmake-build/cmake-build-raspberry_pi_pico run: | - find device/ -name "*.elf" -exec mv {} ../ \; - # find host/ -name "*.elf" -exec mv {} ../ \; - # find dual/ -name "*.elf" -exec mv {} ../ \; + find device/ -name "*.elf" -exec mv {} ../../ \; + # find host/ -name "*.elf" -exec mv {} ../../ \; + # find dual/ -name "*.elf" -exec mv {} ../../ \; - name: Upload Artifacts for rp2040 if: contains(matrix.family,'rp2040') && github.repository_owner == 'hathach' diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d9b8bbbe9..fdc9580ae 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -84,8 +84,8 @@ endfunction() function(family_initialize_project PROJECT DIR) - # set output suffix to .elf (skip espressif) - if(NOT FAMILY STREQUAL "espressif") + # set output suffix to .elf (skip espressif and rp2040) + if(NOT FAMILY STREQUAL "espressif" AND NOT FAMILY STREQUAL "rp2040") set(CMAKE_EXECUTABLE_SUFFIX .elf PARENT_SCOPE) endif() @@ -144,6 +144,11 @@ function(family_add_default_example_warnings TARGET) endfunction() +#------------------------------------ +# Main target configure +#------------------------------------ + +# Add common configuration to example function(family_configure_common TARGET) # run size after build add_custom_command(TARGET ${TARGET} POST_BUILD @@ -158,6 +163,66 @@ function(family_configure_common TARGET) endfunction() +# configure an executable target to link to tinyusb in device mode, and add the board implementation +function(family_configure_device_example TARGET) + # default implementation is empty, the function should be redefined in the FAMILY/family.cmake +endfunction() + + +# configure an executable target to link to tinyusb in host mode, and add the board implementation +function(family_configure_host_example TARGET) + # default implementation is empty, the function should be redefined in the FAMILY/family.cmake +endfunction() + + +# Add tinyusb to example +function(family_add_tinyusb TARGET OPT_MCU) + # tinyusb target is built for each example since it depends on example's tusb_config.h + set(TINYUSB_TARGET_PREFIX ${TARGET}-) + add_library(${TARGET}-tinyusb_config INTERFACE) + + target_include_directories(${TARGET}-tinyusb_config INTERFACE + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_MCU=${OPT_MCU} + ) + + # tinyusb's CMakeList.txt + add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) +endfunction() + + +# Add freeRTOS support to example +function(family_add_freertos TARGET) + # freeros config + if (NOT TARGET freertos_config) + add_library(freertos_config INTERFACE) + target_include_directories(freertos_config SYSTEM INTERFACE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig + ) + endif() + + # freertos kernel should be generic as freertos_config however, CMAKE complains with missing variable + # such as CMAKE_C_COMPILE_OBJECT + if (NOT TARGET freertos_kernel) + add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) + endif () + + # Add FreeRTOS option to tinyusb_config + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE + CFG_TUSB_OS=OPT_OS_FREERTOS + ) + # link tinyusb with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC + freertos_kernel + ) + target_link_libraries(${TARGET} PUBLIC + freertos_kernel + ) +endfunction() + + # Add bin/hex output function(family_add_bin_hex TARGET) add_custom_command(TARGET ${TARGET} POST_BUILD @@ -167,6 +232,10 @@ function(family_add_bin_hex TARGET) endfunction() +#---------------------------------- +# Flashing target +#---------------------------------- + # Add flash jlink target function(family_flash_jlink TARGET) if (NOT DEFINED JLINKEXE) @@ -233,48 +302,7 @@ function(family_flash_nxplink TARGET) endfunction() -# configure an executable target to link to tinyusb in device mode, and add the board implementation -function(family_configure_device_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake -endfunction() - - -# configure an executable target to link to tinyusb in host mode, and add the board implementation -function(family_configure_host_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake -endfunction() - - -# Add freeRTOS support to example, can be overridden by FAMILY/family.cmake -function(family_add_freertos TARGET) - # freeros config - if (NOT TARGET freertos_config) - add_library(freertos_config INTERFACE) - target_include_directories(freertos_config SYSTEM INTERFACE - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig - ) - endif() - - # freertos kernel should be generic as freertos_config however, CMAKE complains with missing variable - # such as CMAKE_C_COMPILE_OBJECT - if (NOT TARGET freertos_kernel) - add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) - endif () - - # Add FreeRTOS option to tinyusb_config - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_OS=OPT_OS_FREERTOS - ) - # link tinyusb with freeRTOS kernel - target_link_libraries(${TARGET}-tinyusb PUBLIC - freertos_kernel - ) - target_link_libraries(${TARGET} PUBLIC - freertos_kernel - ) -endfunction() - - +# family specific: can override above functions include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) if (NOT FAMILY_MCUS) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 49a4a9281..3c156285c 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -36,7 +36,6 @@ if (NOT TARGET ${BOARD_TARGET}) ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c ) target_compile_definitions(${BOARD_TARGET} PUBLIC - CFG_TUSB_MCU=OPT_MCU_MIMXRT __ARMVFP__=0 __ARMFPV5__=0 XIP_EXTERNAL_FLASH=1 @@ -100,33 +99,16 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - #---------- TinyUSB ---------- - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) - - target_include_directories(${TARGET}-tinyusb_config INTERFACE - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_MCU=OPT_MCU_MIMXRT - ) - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT) # Link dependencies target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - # group target (not yet supported by clion) - set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config - PROPERTIES FOLDER ${TARGET}_sub - ) - - #---------- Flash ---------- + # Flashing family_flash_jlink(${TARGET}) family_flash_nxplink(${TARGET}) - family_flash_pyocd(${TARGET}) + #family_flash_pyocd(${TARGET}) endfunction() diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 515348e10..a133e7217 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -83,30 +83,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - #---------- TinyUSB ---------- - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) - - target_include_directories(${TARGET}-tinyusb_config INTERFACE - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_MCU=OPT_MCU_LPC18XX - ) - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) # Link dependencies target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - # group target (not yet supported by clion) - set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config - PROPERTIES FOLDER ${TARGET}_sub - ) - - #---------- Flash ---------- + # Flashing family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index eb163bde7..25eed48de 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -109,33 +109,16 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - #---------- TinyUSB ---------- - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) - - target_include_directories(${TARGET}-tinyusb_config INTERFACE - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_MCU=OPT_MCU_LPC55XX - ) - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX) # Link dependencies target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - # group target (not yet supported by clion) - set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config - PROPERTIES FOLDER ${TARGET}_sub - ) - - #---------- Flash ---------- + # Flashing family_flash_jlink(${TARGET}) family_flash_nxplink(${TARGET}) - family_flash_pyocd(${TARGET}) + #family_flash_pyocd(${TARGET}) endfunction() diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index d5a17f584..17f54a53b 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -91,30 +91,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - #---------- TinyUSB ---------- - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) - - target_include_directories(${TARGET}-tinyusb_config INTERFACE - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_MCU=OPT_MCU_MCXN9 - ) - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_MCXN9) # Link dependencies target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - # group target (not yet supported by clion) - set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config - PROPERTIES FOLDER ${TARGET}_sub - ) - - #---------- Flash ---------- + # Flashing family_flash_jlink(${TARGET}) #family_flash_nxplink(${TARGET}) #family_flash_pyocd(${TARGET}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 71067c8ae..2c5d7a431 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -98,30 +98,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - #---------- TinyUSB ---------- - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) - - target_include_directories(${TARGET}-tinyusb_config INTERFACE - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_MCU=OPT_MCU_NRF5X - ) - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_NRF5X) # Link dependencies target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - # group target (not yet supported by clion) - set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config - PROPERTIES FOLDER ${TARGET}_sub - ) - - #---------- Flash ---------- + # Flashing family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 9674bc759..184dc6062 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -96,30 +96,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - #---------- TinyUSB ---------- - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) - - target_include_directories(${TARGET}-tinyusb_config INTERFACE - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_MCU=OPT_MCU_STM32G0 - ) - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) # Link dependencies target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - # group target (not yet supported by clion) - set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config - PROPERTIES FOLDER ${TARGET}_sub - ) - - #---------- Flash ---------- + # Flashing family_flash_stlink(${TARGET}) #family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 1de6fd674..5578a9b6c 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -12,7 +12,7 @@ set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # enable LTO -#set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") @@ -96,30 +96,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - #---------- TinyUSB ---------- - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) - - target_include_directories(${TARGET}-tinyusb_config INTERFACE - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_MCU=OPT_MCU_STM32G4 - ) - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + # Add TinyUSB + family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) # Link dependencies target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) - # group target (not yet supported by clion) - set_target_properties(${TARGET}-tinyusb ${TARGET}-tinyusb_config - PROPERTIES FOLDER ${TARGET}_sub - ) - - #---------- Flash ---------- + # Flashing family_flash_stlink(${TARGET}) #family_flash_jlink(${TARGET}) endfunction() diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 396737ed5..ad9fbc7c0 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -96,3 +96,7 @@ endif() target_link_libraries(${TINYUSB_TARGET} PUBLIC ${TINYUSB_CONFIG_TARGET} ) + +# export target name +# set(TINYUSB_TARGET ${TINYUSB_TARGET} PARENT_SCOPE) +# set(TINYUSB_CONFIG_TARGET ${TINYUSB_CONFIG_TARGET} PARENT_SCOPE) diff --git a/tools/build_cmake.py b/tools/build_cmake.py index 88d27dfb8..d85726213 100644 --- a/tools/build_cmake.py +++ b/tools/build_cmake.py @@ -34,13 +34,15 @@ def build_family(family, make_option): for board in all_boards: start_time = time.monotonic() + build_dir = f"cmake-build/cmake-build-{board}" + # Generate build - r = subprocess.run(f"cmake examples -B cmake-build-ci-{board} -G \"Ninja\" -DFAMILY={family} -DBOARD" + r = subprocess.run(f"cmake examples -B {build_dir} -G \"Ninja\" -DFAMILY={family} -DBOARD" f"={board}", shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) # Build if r.returncode == 0: - r = subprocess.run(f"cmake --build cmake-build-ci-{board}", shell=True, stdout=subprocess.PIPE, + r = subprocess.run(f"cmake --build {build_dir}", shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) duration = time.monotonic() - start_time @@ -71,10 +73,10 @@ if __name__ == '__main__': if make_iar_option not in sys.argv: make_iar_option = '' - # If family are not specified in arguments, build all + # If family are not specified in arguments, build all supported all_families = [] for entry in os.scandir("hw/bsp"): - if entry.is_dir() and os.path.isdir(entry.path + "/boards") and entry.name != 'espressif': + if entry.is_dir() and entry.name != 'espressif' and os.path.isfile(entry.path + "/family.cmake"): all_families.append(entry.name) filter_with_input(all_families) all_families.sort() -- cgit v1.3.1 From bb795e6a5eededff57f18336c11b84f5470d4e4e Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 2 Jun 2023 15:26:16 +0700 Subject: update cmake to build with IAR for g0 and g4 --- hw/bsp/family_support.cmake | 2 +- hw/bsp/imxrt/family.cmake | 126 ++++++++++++--------- hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake | 2 +- hw/bsp/lpc18/boards/mcb1800/board.cmake | 2 +- hw/bsp/lpc18/family.cmake | 86 ++++++++------ hw/bsp/lpc55/boards/double_m33_express/board.cmake | 2 +- hw/bsp/lpc55/family.cmake | 108 ++++++++++-------- hw/bsp/mcx/family.cmake | 100 ++++++++-------- hw/bsp/nrf/boards/pca10056/board.cmake | 2 +- hw/bsp/nrf/boards/pca10095/board.cmake | 2 +- hw/bsp/nrf/family.cmake | 99 +++++++++------- hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake | 4 +- hw/bsp/stm32g0/family.cmake | 37 +++--- hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake | 4 +- hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake | 4 +- hw/bsp/stm32g4/family.cmake | 97 ++++++++-------- tools/cmake/cpu/cortex-m3.cmake | 12 +- tools/cmake/cpu/cortex-m33.cmake | 13 ++- tools/cmake/cpu/cortex-m4.cmake | 13 ++- tools/cmake/cpu/cortex-m7.cmake | 13 ++- 20 files changed, 416 insertions(+), 312 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index e801f0116..fdcd9a983 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -108,7 +108,7 @@ function(family_configure_common TARGET) COMMAND ${CMAKE_SIZE} $ ) - if (CMAKE_C_COMPILER_ID STREQUAL "GCC") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") # Generate map file target_link_options(${TARGET} PUBLIC # link map diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index b5d47614e..f687fe833 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -4,8 +4,11 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -# enable LTO -set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") @@ -13,66 +16,79 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MIMXRT CACHE INTERNAL "") -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -set(BOARD_TARGET board_${BOARD}) -if (NOT TARGET ${BOARD_TARGET}) - set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) - set(CMSIS_DIR ${TOP}/lib/CMSIS_5) - - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/drivers/common/fsl_common.c - ${SDK_DIR}/drivers/igpio/fsl_gpio.c - ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c - ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c - ${SDK_DIR}/devices/${MCU_VARIANT}/project_template/clock_config.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - __ARMVFP__=0 - __ARMFPV5__=0 - XIP_EXTERNAL_FLASH=1 - XIP_BOOT_HEADER_ENABLE=1 - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/project_template - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/igpio - ${SDK_DIR}/drivers/lpuart - ) - update_board(${BOARD_TARGET}) +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/drivers/common/fsl_common.c + ${SDK_DIR}/drivers/igpio/fsl_gpio.c + ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c + ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c + ${SDK_DIR}/devices/${MCU_VARIANT}/project_template/clock_config.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __ARMVFP__=0 + __ARMFPV5__=0 + XIP_EXTERNAL_FLASH=1 + XIP_BOOT_HEADER_ENABLE=1 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/project_template + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/igpio + ${SDK_DIR}/drivers/lpuart + ) - if (NOT DEFINED LD_FILE_${TOOLCHAIN}) - set(LD_FILE_GCC ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) - endif () + update_board(${BOARD_TARGET}) + + # LD_FILE and STARTUP_FILE can be defined in board.cmake + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) + #set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) + endif () + + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) + #set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) + endif () - if (TOOLCHAIN STREQUAL "gcc") target_sources(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GCC}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - # force linker to look for these symbols - -Wl,-uimage_vector_table - -Wl,-ug_boot_data - ) - else () - # TODO support IAR + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + # force linker to look for these symbols + -Wl,-uimage_vector_table + -Wl,-ug_boot_data + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () -endif () # BOARD_TARGET +endfunction() #------------------------------------ @@ -81,6 +97,9 @@ endif () # BOARD_TARGET function(family_configure_example TARGET) family_configure_common(${TARGET}) + # Board target + add_board_target(board_${BOARD}) + #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC @@ -103,12 +122,11 @@ function(family_configure_example TARGET) family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT) # Link dependencies - target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) - family_flash_nxplink(${TARGET}) - #family_flash_pyocd(${TARGET}) + #family_flash_nxplink(${TARGET}) endfunction() diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake index 00686ca01..3abe6f3bb 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.cmake @@ -4,7 +4,7 @@ set(JLINK_DEVICE LPC18S37) set(PYOCD_TARGET LPC18S37) set(NXPLINK_DEVICE LPC18S37:LPCXPRESSO18S37) -set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/lpc1837.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc1837.ld) function(update_board TARGET) # nothing to do diff --git a/hw/bsp/lpc18/boards/mcb1800/board.cmake b/hw/bsp/lpc18/boards/mcb1800/board.cmake index cfc2739e3..f6fae89d7 100644 --- a/hw/bsp/lpc18/boards/mcb1800/board.cmake +++ b/hw/bsp/lpc18/boards/mcb1800/board.cmake @@ -4,7 +4,7 @@ set(JLINK_DEVICE LPC1857) set(PYOCD_TARGET LPC1857) set(NXPLINK_DEVICE LPC1857:MCB1857) -set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/lpc1857.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc1857.ld) function(update_board TARGET) # nothing to do diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 38b0f61fc..bcdec9c01 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -6,8 +6,8 @@ endif () set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx) -# enable LTO -set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") @@ -15,48 +15,56 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -set(BOARD_TARGET board_${BOARD}) -if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/../gcc/cr_startup_lpc18xx.c - ${SDK_DIR}/src/chip_18xx_43xx.c - ${SDK_DIR}/src/clock_18xx_43xx.c - ${SDK_DIR}/src/gpio_18xx_43xx.c - ${SDK_DIR}/src/sysinit_18xx_43xx.c - ${SDK_DIR}/src/uart_18xx_43xx.c - ) - target_compile_options(${BOARD_TARGET} PUBLIC - -nostdlib - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - __USE_LPCOPEN - CORE_M3 - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/inc - ${SDK_DIR}/inc/config_18xx - ) - update_board(${BOARD_TARGET}) - - if (TOOLCHAIN STREQUAL "gcc") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GCC}" - # nanolib - --specs=nosys.specs - --specs=nano.specs +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/../gcc/cr_startup_lpc18xx.c + ${SDK_DIR}/src/chip_18xx_43xx.c + ${SDK_DIR}/src/clock_18xx_43xx.c + ${SDK_DIR}/src/gpio_18xx_43xx.c + ${SDK_DIR}/src/sysinit_18xx_43xx.c + ${SDK_DIR}/src/uart_18xx_43xx.c + ) + target_compile_options(${BOARD_TARGET} PUBLIC + -nostdlib + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __USE_LPCOPEN + CORE_M3 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/inc + ${SDK_DIR}/inc/config_18xx ) - else () - # TODO support IAR + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () -endif () # BOARD_TARGET +endfunction() #------------------------------------ @@ -65,6 +73,9 @@ endif () # BOARD_TARGET function(family_configure_example TARGET) family_configure_common(${TARGET}) + # Board target + add_board_target(board_${BOARD}) + #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC @@ -87,10 +98,11 @@ function(family_configure_example TARGET) family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) # Link dependencies - target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) + #family_flash_nxplink(${TARGET}) endfunction() diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.cmake b/hw/bsp/lpc55/boards/double_m33_express/board.cmake index 62b0993dc..f84e629c7 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.cmake +++ b/hw/bsp/lpc55/boards/double_m33_express/board.cmake @@ -5,7 +5,7 @@ set(JLINK_DEVICE LPC55S69) set(PYOCD_TARGET LPC55S69) set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) -set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 967ed3fa6..22a09ce10 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -31,58 +31,67 @@ endif() # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -set(BOARD_TARGET board_${BOARD}) -if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - # driver - ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c - ${SDK_DIR}/drivers/common/fsl_common_arm.c - ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c - ${SDK_DIR}/drivers/flexcomm/fsl_usart.c - # mcu - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${TOP}/lib/sct_neopixel - # driver - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/flexcomm - ${SDK_DIR}/drivers/lpc_iocon - ${SDK_DIR}/drivers/lpc_gpio - ${SDK_DIR}/drivers/lpuart - ${SDK_DIR}/drivers/sctimer - # mcu - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ) - update_board(${BOARD_TARGET}) +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + # driver + ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c + ${SDK_DIR}/drivers/common/fsl_common_arm.c + ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c + ${SDK_DIR}/drivers/flexcomm/fsl_usart.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${TOP}/lib/sct_neopixel + # driver + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/lpc_iocon + ${SDK_DIR}/drivers/lpc_gpio + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/sctimer + # mcu + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ) - if (NOT DEFINED LD_FILE_${TOOLCHAIN}) - set(LD_FILE_GCC ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () + update_board(${BOARD_TARGET}) + + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + endif () + + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + endif () - if (TOOLCHAIN STREQUAL "gcc") target_sources(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S - ) - target_link_options(${BOARD_TARGET} PUBLIC - # linker file - "LINKER:--script=${LD_FILE_GCC}" - # nanolib - --specs=nosys.specs - --specs=nano.specs + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - else () - # TODO support IAR + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () -endif () # BOARD_TARGET +endfunction() #------------------------------------ @@ -91,6 +100,9 @@ endif () # BOARD_TARGET function(family_configure_example TARGET) family_configure_common(${TARGET}) + # Board target + add_board_target(board_${BOARD}) + #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC @@ -113,7 +125,7 @@ function(family_configure_example TARGET) family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX) # Link dependencies - target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 17f54a53b..1dbf6f8f7 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -7,8 +7,8 @@ endif () set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) -# enable LTO -set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") @@ -16,57 +16,64 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC55XX CACHE INTERNAL "") -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -set(BOARD_TARGET board_${BOARD}) -if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - # external driver - #lib/sct_neopixel/sct_neopixel.c - - # driver - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c - # mcu - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c - ) -# target_compile_definitions(${BOARD_TARGET} PUBLIC -# ) - target_include_directories(${BOARD_TARGET} PUBLIC - # driver - # mcu - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ) - update_board(${BOARD_TARGET}) - - if (TOOLCHAIN STREQUAL "gcc") - target_sources(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + # external driver + #lib/sct_neopixel/sct_neopixel.c + + # driver + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c ) - cmake_print_variables(CMAKE_CURRENT_BINARY_DIR) - target_link_options(${BOARD_TARGET} PUBLIC - # linker file - "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld" - # nanolib - --specs=nosys.specs - --specs=nano.specs + # target_compile_definitions(${BOARD_TARGET} PUBLIC + # ) + target_include_directories(${BOARD_TARGET} PUBLIC + # driver + # mcu + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers ) - else () - # TODO support IAR + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_sources(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S + ) + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () -endif () # BOARD_TARGET +endfunction() #------------------------------------ @@ -75,6 +82,9 @@ endif () # BOARD_TARGET function(family_configure_example TARGET) family_configure_common(${TARGET}) + # Board target + add_board_target(board_${BOARD}) + #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC @@ -95,7 +105,7 @@ function(family_configure_example TARGET) family_add_tinyusb(${TARGET} OPT_MCU_MCXN9) # Link dependencies - target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/nrf/boards/pca10056/board.cmake b/hw/bsp/nrf/boards/pca10056/board.cmake index 3137c4fcd..b4fe39fc0 100644 --- a/hw/bsp/nrf/boards/pca10056/board.cmake +++ b/hw/bsp/nrf/boards/pca10056/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT nrf52840) -set(LD_FILE_GCC ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) +set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index a0562c738..1eb8ad4f1 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT nrf5340_application) -set(LD_FILE_GCC ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) +set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index e94aeb9bd..7faeaf6cb 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -10,9 +10,6 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) -# enable LTO -set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) - # toolchain set up if (MCU_VARIANT STREQUAL "nrf5340_application") set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") @@ -26,54 +23,69 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS NRF5X CACHE INTERNAL "") +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -set(BOARD_TARGET board_${BOARD}) -if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - # driver - ${NRFX_DIR}/drivers/src/nrfx_power.c - ${NRFX_DIR}/drivers/src/nrfx_uarte.c - # mcu - ${NRFX_DIR}/mdk/system_${MCU_VARIANT}.c - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CONFIG_GPIO_AS_PINRESET - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_LIST_DIR} - ${NRFX_DIR} - ${NRFX_DIR}/mdk - ${NRFX_DIR}/hal - ${NRFX_DIR}/drivers/include - ${NRFX_DIR}/drivers/src - ${CMSIS_DIR}/CMSIS/Core/Include - ) - update_board(${BOARD_TARGET}) +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + # driver + ${NRFX_DIR}/drivers/src/nrfx_power.c + ${NRFX_DIR}/drivers/src/nrfx_uarte.c + # mcu + ${NRFX_DIR}/mdk/system_${MCU_VARIANT}.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CONFIG_GPIO_AS_PINRESET + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${NRFX_DIR} + ${NRFX_DIR}/mdk + ${NRFX_DIR}/hal + ${NRFX_DIR}/drivers/include + ${NRFX_DIR}/drivers/src + ${CMSIS_DIR}/CMSIS/Core/Include + ) - if (NOT DEFINED LD_FILE_${TOOLCHAIN}) - set(LD_FILE_GCC ${NRFX_DIR}/mdk/${MCU_VARIANT}_xxaa.ld) - endif () + update_board(${BOARD_TARGET}) + + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${NRFX_DIR}/mdk/${MCU_VARIANT}_xxaa.ld) + endif () + + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) + endif () - if (TOOLCHAIN STREQUAL "gcc") target_sources(${BOARD_TARGET} PUBLIC - ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S - ) - target_link_options(${BOARD_TARGET} PUBLIC - # linker file - "LINKER:--script=${LD_FILE_GCC}" - -L${NRFX_DIR}/mdk - # nanolib - --specs=nosys.specs - --specs=nano.specs + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - else () - # TODO support IAR + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${LD_FILE_GNU}" + -L${NRFX_DIR}/mdk + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () -endif () # BOARD_TARGET +endfunction() #------------------------------------ @@ -82,6 +94,9 @@ endif () # BOARD_TARGET function(family_configure_example TARGET) family_configure_common(${TARGET}) + # Board target + add_board_target(board_${BOARD}) + #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC @@ -102,7 +117,7 @@ function(family_configure_example TARGET) family_add_tinyusb(${TARGET} OPT_MCU_NRF5X) # Link dependencies - target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake index 145490921..1ebf8a700 100644 --- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake +++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake @@ -1,10 +1,10 @@ #set(MCU_VARIANT MIMXRT1011) set(JLINK_DEVICE STM32G0B1RE) -set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/STM32G0B1RETx_FLASH.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G0B1RETx_FLASH.ld) set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/stm32g0b1xx_flash.icf) -set(STARTUP_FILE_GCC ${ST_CMSIS}/Source/Templates/gcc/startup_stm32g0b1xx.s) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_stm32g0b1xx.s) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_stm32g0b1xx.s) function(update_board TARGET) diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index d77b3c102..988033070 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -11,8 +11,8 @@ set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) -# enable LTO -#set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") @@ -20,17 +20,21 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G0 CACHE INTERNAL "") -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -function(add_board_target TARGET) - if (NOT TARGET ${TARGET}) - add_library(${TARGET} STATIC +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c @@ -42,30 +46,31 @@ function(add_board_target TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - target_include_directories(${TARGET} PUBLIC + target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMSIS_5}/CMSIS/Core/Include ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - target_compile_options(${TARGET} PUBLIC + target_compile_options(${BOARD_TARGET} PUBLIC ) - target_compile_definitions(${TARGET} PUBLIC + target_compile_definitions(${BOARD_TARGET} PUBLIC ) - update_board(${TARGET}) + update_board(${BOARD_TARGET}) + + cmake_print_variables(CMAKE_C_COMPILER_ID) - if (CMAKE_C_COMPILER_ID STREQUAL "GCC") - target_link_options(${TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GCC}" + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" -nostartfiles # nanolib --specs=nosys.specs --specs=nano.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - # TODO support IAR - target_link_options(${TARGET} PUBLIC + target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}" ) endif () diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake index 3a4849ef6..9b72672ea 100644 --- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake +++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake @@ -1,10 +1,10 @@ set(MCU_VARIANT stm32g474xx) set(JLINK_DEVICE stm32g474re) -set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) -set(STARTUP_FILE_GCC ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) function(update_board TARGET) diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake index f13f1fc28..88cd616b3 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake @@ -1,10 +1,10 @@ set(MCU_VARIANT stm32g474xx) set(JLINK_DEVICE stm32g474re) -set(LD_FILE_GCC ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld) set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) -set(STARTUP_FILE_GCC ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) function(update_board TARGET) diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index c87486677..ab17c0980 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -11,8 +11,8 @@ set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) -# enable LTO -set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") @@ -20,58 +20,60 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples -set(BOARD_TARGET board_${BOARD}) -if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc - ) - target_compile_options(${BOARD_TARGET} PUBLIC - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) - update_board(${BOARD_TARGET}) - - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${TOOLCHAIN}} - ) - - if (TOOLCHAIN STREQUAL "gcc") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GCC}" - -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc ) - else () - # TODO support IAR - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" + target_compile_options(${BOARD_TARGET} PUBLIC ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () endif () -endif () # BOARD_TARGET +endfunction() #------------------------------------ @@ -80,6 +82,9 @@ endif () # BOARD_TARGET function(family_configure_example TARGET) family_configure_common(${TARGET}) + # Board target + add_board_target(board_${BOARD}) + #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC @@ -100,7 +105,7 @@ function(family_configure_example TARGET) family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) # Link dependencies - target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_stlink(${TARGET}) diff --git a/tools/cmake/cpu/cortex-m3.cmake b/tools/cmake/cpu/cortex-m3.cmake index b740ee44c..f6f5a62f8 100644 --- a/tools/cmake/cpu/cortex-m3.cmake +++ b/tools/cmake/cpu/cortex-m3.cmake @@ -1,10 +1,16 @@ if (TOOLCHAIN STREQUAL "gcc") - list(APPEND TOOLCHAIN_COMMON_FLAGS + set(TOOLCHAIN_COMMON_FLAGS -mthumb -mcpu=cortex-m3 ) set(FREERTOS_PORT GCC_ARM_CM3 CACHE INTERNAL "") -else () - # TODO support IAR + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m3 + ) + + set(FREERTOS_PORT IAR_ARM_CM3 CACHE INTERNAL "") + endif () diff --git a/tools/cmake/cpu/cortex-m33.cmake b/tools/cmake/cpu/cortex-m33.cmake index fda277010..7ebaf1748 100644 --- a/tools/cmake/cpu/cortex-m33.cmake +++ b/tools/cmake/cpu/cortex-m33.cmake @@ -1,5 +1,5 @@ if (TOOLCHAIN STREQUAL "gcc") - list(APPEND TOOLCHAIN_COMMON_FLAGS + set(TOOLCHAIN_COMMON_FLAGS -mthumb -mcpu=cortex-m33 -mfloat-abi=hard @@ -7,6 +7,13 @@ if (TOOLCHAIN STREQUAL "gcc") ) set(FREERTOS_PORT GCC_ARM_CM33_NTZ_NONSECURE CACHE INTERNAL "") -else () - # TODO support IAR + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m33 + --fpu VFPv5-SP + ) + + set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") + endif () diff --git a/tools/cmake/cpu/cortex-m4.cmake b/tools/cmake/cpu/cortex-m4.cmake index 5a2d16c05..a0cf3498f 100644 --- a/tools/cmake/cpu/cortex-m4.cmake +++ b/tools/cmake/cpu/cortex-m4.cmake @@ -1,5 +1,5 @@ if (TOOLCHAIN STREQUAL "gcc") - list(APPEND TOOLCHAIN_COMMON_FLAGS + set(TOOLCHAIN_COMMON_FLAGS -mthumb -mcpu=cortex-m4 -mfloat-abi=hard @@ -7,6 +7,13 @@ if (TOOLCHAIN STREQUAL "gcc") ) set(FREERTOS_PORT GCC_ARM_CM4F CACHE INTERNAL "") -else () - # TODO support IAR + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m4 + --fpu VFPv4 + ) + + set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") + endif () diff --git a/tools/cmake/cpu/cortex-m7.cmake b/tools/cmake/cpu/cortex-m7.cmake index 481c86bc5..3e5f7f44b 100644 --- a/tools/cmake/cpu/cortex-m7.cmake +++ b/tools/cmake/cpu/cortex-m7.cmake @@ -1,5 +1,5 @@ if (TOOLCHAIN STREQUAL "gcc") - list(APPEND TOOLCHAIN_COMMON_FLAGS + set(TOOLCHAIN_COMMON_FLAGS -mthumb -mcpu=cortex-m7 -mfloat-abi=hard @@ -7,6 +7,13 @@ if (TOOLCHAIN STREQUAL "gcc") ) set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") -else () - # TODO support IAR + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m7 + --fpu VFPv5_D16 + ) + + set(FREERTOS_PORT IAR_ARM_CM7 CACHE INTERNAL "") + endif () -- cgit v1.3.1 From 8b8b9690ad8c546a8310c942ea926f654562f97c Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 14 Jun 2023 12:01:21 +0700 Subject: update segger rtt to fix cast align --- hw/bsp/mcx/boards/mcxn947brk/board.cmake | 1 + hw/bsp/mcx/boards/mcxn947brk/board.mk | 6 +- hw/bsp/mcx/family.cmake | 2 +- lib/SEGGER_RTT/RTT/SEGGER_RTT.c | 50 ++-- lib/SEGGER_RTT/RTT/SEGGER_RTT.h | 17 +- lib/SEGGER_RTT/RTT/SEGGER_RTT_printf.c | 500 +++++++++++++++++++++++++++++++ 6 files changed, 545 insertions(+), 31 deletions(-) create mode 100644 lib/SEGGER_RTT/RTT/SEGGER_RTT_printf.c (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.cmake b/hw/bsp/mcx/boards/mcxn947brk/board.cmake index 7a210628f..650f10967 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.cmake +++ b/hw/bsp/mcx/boards/mcxn947brk/board.cmake @@ -10,6 +10,7 @@ function(update_board TARGET) CPU_MCXN947VDF_cm33_core0 # port 1 is highspeed BOARD_TUD_RHPORT=1 + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED ) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.mk b/hw/bsp/mcx/boards/mcxn947brk/board.mk index 69f47b8a8..aaad5e73e 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.mk +++ b/hw/bsp/mcx/boards/mcxn947brk/board.mk @@ -4,8 +4,8 @@ PORT ?= 1 CFLAGS += -DCPU_MCXN947VDF_cm33_core0 -JLINK_DEVICE = LPC55S69 -PYOCD_TARGET = LPC55S69 +JLINK_DEVICE = MCXN947_M33_0 +PYOCD_TARGET = MCXN947 # flash using pyocd -flash: flash-pyocd +flash: flash-jlink diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 1dbf6f8f7..1c85b51f8 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -14,7 +14,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS LPC55XX CACHE INTERNAL "") +set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") # enable LTO if supported include(CheckIPOSupported) diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c index 895085ba2..730a5cfb3 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c @@ -306,7 +306,7 @@ static unsigned char _ActiveTerminal; #define INIT() \ do { \ volatile SEGGER_RTT_CB* pRTTCBInit; \ - pRTTCBInit = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); \ + pRTTCBInit = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); \ if (pRTTCBInit->acID[0] != 'S') { \ _DoInit(); \ } \ @@ -319,7 +319,7 @@ static void _DoInit(void) { // // Initialize control block // - p = (volatile SEGGER_RTT_CB*)((char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access control block uncached so that nothing in the cache ever becomes dirty and all changes are visible in HW directly + p = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access control block uncached so that nothing in the cache ever becomes dirty and all changes are visible in HW directly memset((SEGGER_RTT_CB*)p, 0, sizeof(_SEGGER_RTT)); // Make sure that the RTT CB is always zero initialized. p->MaxNumUpBuffers = SEGGER_RTT_MAX_NUM_UP_BUFFERS; p->MaxNumDownBuffers = SEGGER_RTT_MAX_NUM_DOWN_BUFFERS; @@ -581,7 +581,7 @@ unsigned SEGGER_RTT_ReadUpBufferNoLock(unsigned BufferIndex, void* pData, unsign volatile char* pSrc; INIT(); - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly pBuffer = (unsigned char*)pData; RdOff = pRing->RdOff; WrOff = pRing->WrOff; @@ -673,7 +673,7 @@ unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned Buffe volatile char* pSrc; // INIT(); - pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_DOWN*)((uintptr_t)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly pBuffer = (unsigned char*)pData; RdOff = pRing->RdOff; WrOff = pRing->WrOff; @@ -840,7 +840,7 @@ void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuff // Get "to-host" ring buffer and copy some elements into local variables. // pData = (const char *)pBuffer; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly // // Check if we will overwrite data and need to adjust the RdOff. // @@ -1033,7 +1033,7 @@ unsigned SEGGER_RTT_WriteDownBufferNoLock(unsigned BufferIndex, const void* pBuf // It is save to cast that to a "to-host" buffer. Up and Down buffer differ in volatility of offsets that might be modified by J-Link. // pData = (const char *)pBuffer; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly // // How we output depends upon the mode... // @@ -1107,7 +1107,7 @@ unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsig // Get "to-host" ring buffer. // pData = (const char *)pBuffer; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly // // How we output depends upon the mode... // @@ -1271,7 +1271,7 @@ unsigned SEGGER_RTT_PutCharSkipNoLock(unsigned BufferIndex, char c) { // // Get "to-host" ring buffer. // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly // // Get write position and handle wrap-around if necessary // @@ -1326,7 +1326,7 @@ unsigned SEGGER_RTT_PutCharSkip(unsigned BufferIndex, char c) { // // Get "to-host" ring buffer. // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly // // Get write position and handle wrap-around if necessary // @@ -1385,7 +1385,7 @@ unsigned SEGGER_RTT_PutChar(unsigned BufferIndex, char c) { // // Get "to-host" ring buffer. // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly // // Get write position and handle wrap-around if necessary // @@ -1492,7 +1492,7 @@ int SEGGER_RTT_HasKey(void) { int r; INIT(); - pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_DOWN*)((uintptr_t)&_SEGGER_RTT.aDown[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly RdOff = pRing->RdOff; if (RdOff != pRing->WrOff) { r = 1; @@ -1518,7 +1518,7 @@ unsigned SEGGER_RTT_HasData(unsigned BufferIndex) { SEGGER_RTT_BUFFER_DOWN* pRing; unsigned v; - pRing = (SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_DOWN*)((uintptr_t)&_SEGGER_RTT.aDown[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly v = pRing->WrOff; return v - pRing->RdOff; } @@ -1539,7 +1539,7 @@ unsigned SEGGER_RTT_HasDataUp(unsigned BufferIndex) { SEGGER_RTT_BUFFER_UP* pRing; unsigned v; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly v = pRing->RdOff; return pRing->WrOff - v; } @@ -1570,7 +1570,7 @@ int SEGGER_RTT_AllocDownBuffer(const char* sName, void* pBuffer, unsigned Buffer INIT(); SEGGER_RTT_LOCK(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly BufferIndex = 0; do { if (pRTTCB->aDown[BufferIndex].pBuffer == NULL) { @@ -1619,7 +1619,7 @@ int SEGGER_RTT_AllocUpBuffer(const char* sName, void* pBuffer, unsigned BufferSi INIT(); SEGGER_RTT_LOCK(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly BufferIndex = 0; do { if (pRTTCB->aUp[BufferIndex].pBuffer == NULL) { @@ -1674,7 +1674,7 @@ int SEGGER_RTT_ConfigUpBuffer(unsigned BufferIndex, const char* sName, void* pBu volatile SEGGER_RTT_BUFFER_UP* pUp; INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly if (BufferIndex < SEGGER_RTT_MAX_NUM_UP_BUFFERS) { SEGGER_RTT_LOCK(); pUp = &pRTTCB->aUp[BufferIndex]; @@ -1726,7 +1726,7 @@ int SEGGER_RTT_ConfigDownBuffer(unsigned BufferIndex, const char* sName, void* p volatile SEGGER_RTT_BUFFER_DOWN* pDown; INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly if (BufferIndex < SEGGER_RTT_MAX_NUM_DOWN_BUFFERS) { SEGGER_RTT_LOCK(); pDown = &pRTTCB->aDown[BufferIndex]; @@ -1769,7 +1769,7 @@ int SEGGER_RTT_SetNameUpBuffer(unsigned BufferIndex, const char* sName) { volatile SEGGER_RTT_BUFFER_UP* pUp; INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly if (BufferIndex < SEGGER_RTT_MAX_NUM_UP_BUFFERS) { SEGGER_RTT_LOCK(); pUp = &pRTTCB->aUp[BufferIndex]; @@ -1804,7 +1804,7 @@ int SEGGER_RTT_SetNameDownBuffer(unsigned BufferIndex, const char* sName) { volatile SEGGER_RTT_BUFFER_DOWN* pDown; INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly if (BufferIndex < SEGGER_RTT_MAX_NUM_DOWN_BUFFERS) { SEGGER_RTT_LOCK(); pDown = &pRTTCB->aDown[BufferIndex]; @@ -1840,7 +1840,7 @@ int SEGGER_RTT_SetFlagsUpBuffer(unsigned BufferIndex, unsigned Flags) { volatile SEGGER_RTT_BUFFER_UP* pUp; INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly if (BufferIndex < SEGGER_RTT_MAX_NUM_UP_BUFFERS) { SEGGER_RTT_LOCK(); pUp = &pRTTCB->aUp[BufferIndex]; @@ -1876,7 +1876,7 @@ int SEGGER_RTT_SetFlagsDownBuffer(unsigned BufferIndex, unsigned Flags) { volatile SEGGER_RTT_BUFFER_DOWN* pDown; INIT(); - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly if (BufferIndex < SEGGER_RTT_MAX_NUM_DOWN_BUFFERS) { SEGGER_RTT_LOCK(); pDown = &pRTTCB->aDown[BufferIndex]; @@ -1930,7 +1930,7 @@ int SEGGER_RTT_SetTerminal (unsigned char TerminalId) { ac[0] = 0xFFu; if (TerminalId < sizeof(_aTerminalId)) { // We only support a certain number of channels ac[1] = _aTerminalId[TerminalId]; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly SEGGER_RTT_LOCK(); // Lock to make sure that no other task is writing into buffer, while we are and number of free bytes in buffer does not change downwards after checking and before writing if ((pRing->Flags & SEGGER_RTT_MODE_MASK) == SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) { _ActiveTerminal = TerminalId; @@ -1982,7 +1982,7 @@ int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s) { // // Get "to-host" ring buffer. // - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[0] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly // // Need to be able to change terminal, write data, change back. // Compute the fixed and variable sizes. @@ -2059,7 +2059,7 @@ int SEGGER_RTT_TerminalOut (unsigned char TerminalId, const char* s) { unsigned SEGGER_RTT_GetAvailWriteSpace (unsigned BufferIndex) { SEGGER_RTT_BUFFER_UP* pRing; - pRing = (SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRing = (SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[BufferIndex] + SEGGER_RTT_UNCACHED_OFF); // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly return _GetAvailWriteSpace(pRing); } @@ -2086,7 +2086,7 @@ unsigned SEGGER_RTT_GetBytesInBuffer(unsigned BufferIndex) { // Avoid warnings regarding volatile access order. It's not a problem // in this case, but dampen compiler enthusiasm. // - pRTTCB = (volatile SEGGER_RTT_CB*)((unsigned char*)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly + pRTTCB = (volatile SEGGER_RTT_CB*)((uintptr_t)&_SEGGER_RTT + SEGGER_RTT_UNCACHED_OFF); // Access RTTCB uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly RdOff = pRTTCB->aUp[BufferIndex].RdOff; WrOff = pRTTCB->aUp[BufferIndex].WrOff; if (RdOff <= WrOff) { diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h index a3161f694..87f2841a5 100644 --- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h @@ -91,6 +91,10 @@ Revision: $Rev: 25842 $ #define _CORE_HAS_RTT_ASM_SUPPORT 1 #define _CORE_NEEDS_DMB 1 #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #elif (defined(__ARM_ARCH_8_1M_MAIN__)) // Cortex-M85 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); #else #define _CORE_HAS_RTT_ASM_SUPPORT 0 #endif @@ -121,6 +125,10 @@ Revision: $Rev: 25842 $ #define _CORE_HAS_RTT_ASM_SUPPORT 1 #define _CORE_NEEDS_DMB 1 #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #elif (defined __ARM_ARCH_8_1M_MAIN__) // Cortex-M85 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); #elif ((defined __ARM_ARCH_7A__) || (defined __ARM_ARCH_7R__)) // Cortex-A/R 32-bit ARMv7-A/R #define _CORE_NEEDS_DMB 1 #define RTT__DMB() __asm volatile ("dmb\n" : : :); @@ -147,6 +155,10 @@ Revision: $Rev: 25842 $ #define _CORE_HAS_RTT_ASM_SUPPORT 1 #define _CORE_NEEDS_DMB 1 #define RTT__DMB() __asm volatile ("dmb\n" : : :); + #elif (defined __ARM_ARCH_8_1M_MAIN__) // Cortex-M85 + #define _CORE_HAS_RTT_ASM_SUPPORT 1 + #define _CORE_NEEDS_DMB 1 + #define RTT__DMB() __asm volatile ("dmb\n" : : :); #elif ((defined __ARM_ARCH_7A__) || (defined __ARM_ARCH_7R__)) // Cortex-A/R 32-bit ARMv7-A/R #define _CORE_NEEDS_DMB 1 #define RTT__DMB() __asm volatile ("dmb\n" : : :); @@ -262,6 +274,7 @@ Revision: $Rev: 25842 $ #ifndef SEGGER_RTT_ASM // defined when SEGGER_RTT.h is included from assembly file #include #include +#include /********************************************************************* * @@ -381,7 +394,7 @@ unsigned SEGGER_RTT_GetBytesInBuffer (unsigned BufferIndex); // // Function macro for performance optimization // -#define SEGGER_RTT_HASDATA(n) (((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) +#define SEGGER_RTT_HASDATA(n) (((SEGGER_RTT_BUFFER_DOWN*)((uintptr_t)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_DOWN*)((char*)&_SEGGER_RTT.aDown[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) #if RTT_USE_ASM #define SEGGER_RTT_WriteSkipNoLock SEGGER_RTT_ASM_WriteSkipNoLock @@ -398,7 +411,7 @@ unsigned SEGGER_RTT_ReadUpBufferNoLock (unsigned BufferIndex, void* pDa unsigned SEGGER_RTT_WriteDownBuffer (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); unsigned SEGGER_RTT_WriteDownBufferNoLock (unsigned BufferIndex, const void* pBuffer, unsigned NumBytes); -#define SEGGER_RTT_HASDATA_UP(n) (((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly +#define SEGGER_RTT_HASDATA_UP(n) (((SEGGER_RTT_BUFFER_UP*)((uintptr_t)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->WrOff - ((SEGGER_RTT_BUFFER_UP*)((char*)&_SEGGER_RTT.aUp[n] + SEGGER_RTT_UNCACHED_OFF))->RdOff) // Access uncached to make sure we see changes made by the J-Link side and all of our changes go into HW directly /********************************************************************* * diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT_printf.c b/lib/SEGGER_RTT/RTT/SEGGER_RTT_printf.c new file mode 100644 index 000000000..4c996b408 --- /dev/null +++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT_printf.c @@ -0,0 +1,500 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH * +* The Embedded Experts * +********************************************************************** +* * +* (c) 1995 - 2019 SEGGER Microcontroller GmbH * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* condition is met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this condition and the following disclaimer. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : SEGGER_RTT_printf.c +Purpose : Replacement for printf to write formatted data via RTT +Revision: $Rev: 17697 $ +---------------------------------------------------------------------- +*/ +#include "SEGGER_RTT.h" +#include "SEGGER_RTT_Conf.h" + +/********************************************************************* +* +* Defines, configurable +* +********************************************************************** +*/ + +#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE + #define SEGGER_RTT_PRINTF_BUFFER_SIZE (64) +#endif + +#include +#include + + +#define FORMAT_FLAG_LEFT_JUSTIFY (1u << 0) +#define FORMAT_FLAG_PAD_ZERO (1u << 1) +#define FORMAT_FLAG_PRINT_SIGN (1u << 2) +#define FORMAT_FLAG_ALTERNATE (1u << 3) + +/********************************************************************* +* +* Types +* +********************************************************************** +*/ + +typedef struct { + char* pBuffer; + unsigned BufferSize; + unsigned Cnt; + + int ReturnValue; + + unsigned RTTBufferIndex; +} SEGGER_RTT_PRINTF_DESC; + +/********************************************************************* +* +* Function prototypes +* +********************************************************************** +*/ + +/********************************************************************* +* +* Static code +* +********************************************************************** +*/ +/********************************************************************* +* +* _StoreChar +*/ +static void _StoreChar(SEGGER_RTT_PRINTF_DESC * p, char c) { + unsigned Cnt; + + Cnt = p->Cnt; + if ((Cnt + 1u) <= p->BufferSize) { + *(p->pBuffer + Cnt) = c; + p->Cnt = Cnt + 1u; + p->ReturnValue++; + } + // + // Write part of string, when the buffer is full + // + if (p->Cnt == p->BufferSize) { + if (SEGGER_RTT_Write(p->RTTBufferIndex, p->pBuffer, p->Cnt) != p->Cnt) { + p->ReturnValue = -1; + } else { + p->Cnt = 0u; + } + } +} + +/********************************************************************* +* +* _PrintUnsigned +*/ +static void _PrintUnsigned(SEGGER_RTT_PRINTF_DESC * pBufferDesc, unsigned v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { + static const char _aV2C[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F' }; + unsigned Div; + unsigned Digit; + unsigned Number; + unsigned Width; + char c; + + Number = v; + Digit = 1u; + // + // Get actual field width + // + Width = 1u; + while (Number >= Base) { + Number = (Number / Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + // + // Print leading chars if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) { + if (FieldWidth != 0u) { + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && (NumDigits == 0u)) { + c = '0'; + } else { + c = ' '; + } + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, c); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Compute Digit. + // Loop until Digit has the value of the highest digit required. + // Example: If the output is 345 (Base 10), loop 2 times until Digit is 100. + // + while (1) { + if (NumDigits > 1u) { // User specified a min number of digits to print? => Make sure we loop at least that often, before checking anything else (> 1 check avoids problems with NumDigits being signed / unsigned) + NumDigits--; + } else { + Div = v / Digit; + if (Div < Base) { // Is our divider big enough to extract the highest digit from value? => Done + break; + } + } + Digit *= Base; + } + // + // Output digits + // + do { + Div = v / Digit; + v -= Div * Digit; + _StoreChar(pBufferDesc, _aV2C[Div]); + if (pBufferDesc->ReturnValue < 0) { + break; + } + Digit /= Base; + } while (Digit); + // + // Print trailing spaces if necessary + // + if ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == FORMAT_FLAG_LEFT_JUSTIFY) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + } +} + +/********************************************************************* +* +* _PrintInt +*/ +static void _PrintInt(SEGGER_RTT_PRINTF_DESC * pBufferDesc, int v, unsigned Base, unsigned NumDigits, unsigned FieldWidth, unsigned FormatFlags) { + unsigned Width; + int Number; + + Number = (v < 0) ? -v : v; + + // + // Get actual field width + // + Width = 1u; + while (Number >= (int)Base) { + Number = (Number / (int)Base); + Width++; + } + if (NumDigits > Width) { + Width = NumDigits; + } + if ((FieldWidth > 0u) && ((v < 0) || ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN))) { + FieldWidth--; + } + + // + // Print leading spaces if necessary + // + if ((((FormatFlags & FORMAT_FLAG_PAD_ZERO) == 0u) || (NumDigits != 0u)) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, ' '); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + // + // Print sign if necessary + // + if (pBufferDesc->ReturnValue >= 0) { + if (v < 0) { + v = -v; + _StoreChar(pBufferDesc, '-'); + } else if ((FormatFlags & FORMAT_FLAG_PRINT_SIGN) == FORMAT_FLAG_PRINT_SIGN) { + _StoreChar(pBufferDesc, '+'); + } else { + + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Print leading zeros if necessary + // + if (((FormatFlags & FORMAT_FLAG_PAD_ZERO) == FORMAT_FLAG_PAD_ZERO) && ((FormatFlags & FORMAT_FLAG_LEFT_JUSTIFY) == 0u) && (NumDigits == 0u)) { + if (FieldWidth != 0u) { + while ((FieldWidth != 0u) && (Width < FieldWidth)) { + FieldWidth--; + _StoreChar(pBufferDesc, '0'); + if (pBufferDesc->ReturnValue < 0) { + break; + } + } + } + } + if (pBufferDesc->ReturnValue >= 0) { + // + // Print number without sign + // + _PrintUnsigned(pBufferDesc, (unsigned)v, Base, NumDigits, FieldWidth, FormatFlags); + } + } + } +} + +/********************************************************************* +* +* Public code +* +********************************************************************** +*/ +/********************************************************************* +* +* SEGGER_RTT_vprintf +* +* Function description +* Stores a formatted string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") +* sFormat Pointer to format string +* pParamList Pointer to the list of arguments for the format string +* +* Return values +* >= 0: Number of bytes which have been stored in the "Up"-buffer. +* < 0: Error +*/ +int SEGGER_RTT_vprintf(unsigned BufferIndex, const char * sFormat, va_list * pParamList) { + char c; + SEGGER_RTT_PRINTF_DESC BufferDesc; + int v; + unsigned NumDigits; + unsigned FormatFlags; + unsigned FieldWidth; + char acBuffer[SEGGER_RTT_PRINTF_BUFFER_SIZE]; + + BufferDesc.pBuffer = acBuffer; + BufferDesc.BufferSize = SEGGER_RTT_PRINTF_BUFFER_SIZE; + BufferDesc.Cnt = 0u; + BufferDesc.RTTBufferIndex = BufferIndex; + BufferDesc.ReturnValue = 0; + + do { + c = *sFormat; + sFormat++; + if (c == 0u) { + break; + } + if (c == '%') { + // + // Filter out flags + // + FormatFlags = 0u; + v = 1; + do { + c = *sFormat; + switch (c) { + case '-': FormatFlags |= FORMAT_FLAG_LEFT_JUSTIFY; sFormat++; break; + case '0': FormatFlags |= FORMAT_FLAG_PAD_ZERO; sFormat++; break; + case '+': FormatFlags |= FORMAT_FLAG_PRINT_SIGN; sFormat++; break; + case '#': FormatFlags |= FORMAT_FLAG_ALTERNATE; sFormat++; break; + default: v = 0; break; + } + } while (v); + // + // filter out field with + // + FieldWidth = 0u; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + FieldWidth = (FieldWidth * 10u) + ((unsigned)c - '0'); + } while (1); + + // + // Filter out precision (number of digits to display) + // + NumDigits = 0u; + c = *sFormat; + if (c == '.') { + sFormat++; + do { + c = *sFormat; + if ((c < '0') || (c > '9')) { + break; + } + sFormat++; + NumDigits = NumDigits * 10u + ((unsigned)c - '0'); + } while (1); + } + // + // Filter out length modifier + // + c = *sFormat; + do { + if ((c == 'l') || (c == 'h')) { + sFormat++; + c = *sFormat; + } else { + break; + } + } while (1); + // + // Handle specifiers + // + switch (c) { + case 'c': { + char c0; + v = va_arg(*pParamList, int); + c0 = (char)v; + _StoreChar(&BufferDesc, c0); + break; + } + case 'd': + v = va_arg(*pParamList, int); + _PrintInt(&BufferDesc, v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'u': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 10u, NumDigits, FieldWidth, FormatFlags); + break; + case 'x': + case 'X': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, NumDigits, FieldWidth, FormatFlags); + break; + case 's': + { + const char * s = va_arg(*pParamList, const char *); + do { + c = *s; + s++; + if (c == '\0') { + break; + } + _StoreChar(&BufferDesc, c); + } while (BufferDesc.ReturnValue >= 0); + } + break; + case 'p': + v = va_arg(*pParamList, int); + _PrintUnsigned(&BufferDesc, (unsigned)v, 16u, 8u, 8u, 0u); + break; + case '%': + _StoreChar(&BufferDesc, '%'); + break; + default: + break; + } + sFormat++; + } else { + _StoreChar(&BufferDesc, c); + } + } while (BufferDesc.ReturnValue >= 0); + + if (BufferDesc.ReturnValue > 0) { + // + // Write remaining data, if any + // + if (BufferDesc.Cnt != 0u) { + SEGGER_RTT_Write(BufferIndex, acBuffer, BufferDesc.Cnt); + } + BufferDesc.ReturnValue += (int)BufferDesc.Cnt; + } + return BufferDesc.ReturnValue; +} + +/********************************************************************* +* +* SEGGER_RTT_printf +* +* Function description +* Stores a formatted string in SEGGER RTT control block. +* This data is read by the host. +* +* Parameters +* BufferIndex Index of "Up"-buffer to be used. (e.g. 0 for "Terminal") +* sFormat Pointer to format string, followed by the arguments for conversion +* +* Return values +* >= 0: Number of bytes which have been stored in the "Up"-buffer. +* < 0: Error +* +* Notes +* (1) Conversion specifications have following syntax: +* %[flags][FieldWidth][.Precision]ConversionSpecifier +* (2) Supported flags: +* -: Left justify within the field width +* +: Always print sign extension for signed conversions +* 0: Pad with 0 instead of spaces. Ignored when using '-'-flag or precision +* Supported conversion specifiers: +* c: Print the argument as one char +* d: Print the argument as a signed integer +* u: Print the argument as an unsigned integer +* x: Print the argument as an hexadecimal integer +* s: Print the string pointed to by the argument +* p: Print the argument as an 8-digit hexadecimal integer. (Argument shall be a pointer to void.) +*/ +int SEGGER_RTT_printf(unsigned BufferIndex, const char * sFormat, ...) { + int r; + va_list ParamList; + + va_start(ParamList, sFormat); + r = SEGGER_RTT_vprintf(BufferIndex, sFormat, &ParamList); + va_end(ParamList); + return r; +} +/*************************** End of file ****************************/ -- cgit v1.3.1 From 31a66eb5bcd09ee62d3a28069ae6a5e7d6e2ec08 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 14 Jun 2023 15:33:57 +0700 Subject: mcx neeed helps to locate rtt control block --- .idea/runConfigurations/mcx947_jlink.xml | 10 ++++++++++ hw/bsp/mcx/mcx.jlinkscript | 5 +++++ 2 files changed, 15 insertions(+) create mode 100644 .idea/runConfigurations/mcx947_jlink.xml create mode 100644 hw/bsp/mcx/mcx.jlinkscript (limited to 'hw/bsp/mcx') diff --git a/.idea/runConfigurations/mcx947_jlink.xml b/.idea/runConfigurations/mcx947_jlink.xml new file mode 100644 index 000000000..71616ab70 --- /dev/null +++ b/.idea/runConfigurations/mcx947_jlink.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/hw/bsp/mcx/mcx.jlinkscript b/hw/bsp/mcx/mcx.jlinkscript new file mode 100644 index 000000000..fd8bcffef --- /dev/null +++ b/hw/bsp/mcx/mcx.jlinkscript @@ -0,0 +1,5 @@ +int SetupTarget(void) { + JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x40000"); + + return 0; +} -- cgit v1.3.1 From d70403f1f496f5853251f83392ffe80130255489 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 15 Jun 2023 13:06:27 +0700 Subject: refactor khci to chipidea fs driver for device (host is not yet) --- .idea/cmake.xml | 3 +- .idea/runConfigurations/mcx947_jlink.xml | 2 +- .idea/runConfigurations/rt1010_jlink.xml | 2 +- .idea/runConfigurations/rt1060_jlink.xml | 2 +- hw/bsp/kinetis_kl/family.cmake | 2 +- hw/bsp/mcx/boards/mcxn947brk/board.cmake | 8 +- hw/bsp/mcx/family.c | 27 +- hw/bsp/mcx/family.cmake | 4 +- hw/bsp/mcx/family.mk | 17 +- src/common/tusb_mcu.h | 6 +- src/portable/chipidea/ci_fs/ci_fs_kinetis.h | 51 +++ src/portable/chipidea/ci_fs/ci_fs_mcx.h | 47 +++ src/portable/chipidea/ci_fs/ci_fs_type.h | 118 ++++++ src/portable/chipidea/ci_fs/dcd_ci_fs.c | 555 ++++++++++++++++++++++++++++ 14 files changed, 804 insertions(+), 40 deletions(-) create mode 100644 src/portable/chipidea/ci_fs/ci_fs_kinetis.h create mode 100644 src/portable/chipidea/ci_fs/ci_fs_mcx.h create mode 100644 src/portable/chipidea/ci_fs/ci_fs_type.h create mode 100644 src/portable/chipidea/ci_fs/dcd_ci_fs.c (limited to 'hw/bsp/mcx') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 3c016ccff..c9024715c 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,7 +2,7 @@ - + @@ -37,6 +37,7 @@ + \ No newline at end of file diff --git a/.idea/runConfigurations/mcx947_jlink.xml b/.idea/runConfigurations/mcx947_jlink.xml index 71616ab70..27661bec5 100644 --- a/.idea/runConfigurations/mcx947_jlink.xml +++ b/.idea/runConfigurations/mcx947_jlink.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/rt1010_jlink.xml b/.idea/runConfigurations/rt1010_jlink.xml index e660a46ae..68ebb8885 100644 --- a/.idea/runConfigurations/rt1010_jlink.xml +++ b/.idea/runConfigurations/rt1010_jlink.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/rt1060_jlink.xml b/.idea/runConfigurations/rt1060_jlink.xml index b9a47a2ce..014a4d1b1 100644 --- a/.idea/runConfigurations/rt1060_jlink.xml +++ b/.idea/runConfigurations/rt1060_jlink.xml @@ -1,5 +1,5 @@ - + diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 77b932b8e..f491b3dee 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -88,7 +88,7 @@ function(family_configure_example TARGET) # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC # TinyUSB Port - ${TOP}/src/portable/nxp/khci/dcd_khci.c + ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.cmake b/hw/bsp/mcx/boards/mcxn947brk/board.cmake index 650f10967..8c3280743 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.cmake +++ b/hw/bsp/mcx/boards/mcxn947brk/board.cmake @@ -5,12 +5,14 @@ set(JLINK_DEVICE MCXN947_M33_0) set(PYOCD_TARGET MCXN947) set(NXPLINK_DEVICE MCXN947:MCXN947) +set(PORT 1) + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_MCXN947VDF_cm33_core0 - # port 1 is highspeed - BOARD_TUD_RHPORT=1 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUD_RHPORT=${PORT} + # port 0 is fullspeed, port 1 is highspeed + BOARD_TUD_MAX_SPEED=$ ) target_sources(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index 36d2f2d0a..4344ffc4e 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -66,6 +66,7 @@ void board_init(void) { BOARD_InitPins(); BOARD_InitBootClocks(); + CLOCK_SetupExtClocking(XTAL0_CLK_HZ); // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -122,31 +123,13 @@ void board_init(void) // USB VBUS /* PORT0 PIN22 configured as USB0_VBUS */ - CLOCK_SetupExtClocking(XTAL0_CLK_HZ); - #if PORT_SUPPORT_DEVICE(0) // Port0 is Full Speed - /* Turn on USB0 Phy */ - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); - - /* reset the IP to make sure it's in reset state. */ - RESET_PeripheralReset(kUSB0D_RST_SHIFT_RSTn); - RESET_PeripheralReset(kUSB0HSL_RST_SHIFT_RSTn); - RESET_PeripheralReset(kUSB0HMR_RST_SHIFT_RSTn); - - // Enable USB Clock Adjustments to trim the FRO for the full speed controller - ANACTRL->FRO192M_CTRL |= ANACTRL_FRO192M_CTRL_USBCLKADJ_MASK; - CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); - CLOCK_AttachClk(kFRO_HF_to_USB0_CLK); - - /*According to reference manual, device mode setting has to be set by access usb host register */ - CLOCK_EnableClock(kCLOCK_Usbhsl0); // enable usb0 host clock - USBFSH->PORTMODE |= USBFSH_PORTMODE_DEV_ENABLE_MASK; - CLOCK_DisableClock(kCLOCK_Usbhsl0); // disable usb0 host clock - - /* enable USB Device clock */ - CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); + CLOCK_AttachClk(kCLK_48M_to_USB0); + CLOCK_EnableClock(kCLOCK_Usb0Ram); + CLOCK_EnableClock(kCLOCK_Usb0Fs); + CLOCK_EnableUsbfsClock(); #endif #if PORT_SUPPORT_DEVICE(1) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 1c85b51f8..7c5feaecf 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -88,8 +88,8 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB Port - ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS + ${TOP}/src/portable/chipidea/$ # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index 2cd4c2448..2722c2038 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -16,21 +16,24 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ -DBOARD_TUD_RHPORT=$(PORT) \ +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration + +# All source paths should be relative to the top level. +LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld + +# TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS ifeq ($(PORT), 1) $(info "PORT1 High Speed") CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + SRC_C += src/portable/chipidea/ci_hs/dcd_ci_hs.c else $(info "PORT0 Full Speed") + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + SRC_C += src/portable/chipidea/ci_fs/dcd_ci_fs.c endif -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration - -# All source paths should be relative to the top level. -LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld - SRC_C += \ - src/portable/chipidea/ci_hs/dcd_ci_hs.c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/system_$(MCU_CORE).c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \ $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \ diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index f89467e75..485d6168d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -79,7 +79,11 @@ #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_MCXN9) - // NOTE: MCXN943 port 1 use chipidea HS, port 0 use chipidea FS + // USB0 is chipidea FS + #define TUP_USBIP_CHIPIDEA_FS + #define TUP_USBIP_CHIPIDEA_FS_MCX + + // USB1 is chipidea HS #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI diff --git a/src/portable/chipidea/ci_fs/ci_fs_kinetis.h b/src/portable/chipidea/ci_fs/ci_fs_kinetis.h new file mode 100644 index 000000000..cd21af1c7 --- /dev/null +++ b/src/portable/chipidea/ci_fs/ci_fs_kinetis.h @@ -0,0 +1,51 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CI_FS_KINETIS_H +#define _CI_FS_KINETIS_H + +#include "fsl_device_registers.h" + +//static const ci_fs_controller_t _ci_controller[] = { +// {.reg_base = USB0_BASE, .irqnum = USB0_IRQn} +//}; + +#define CI_FS_REG(_port) ((ci_fs_regs_t*) USB0_BASE) +#define CI_REG CI_FS_REG(0) + +void dcd_int_enable(uint8_t rhport) +{ + (void) rhport; + NVIC_EnableIRQ(USB0_IRQn); +} + +void dcd_int_disable(uint8_t rhport) +{ + (void) rhport; + NVIC_DisableIRQ(USB0_IRQn); +} + +#endif diff --git a/src/portable/chipidea/ci_fs/ci_fs_mcx.h b/src/portable/chipidea/ci_fs/ci_fs_mcx.h new file mode 100644 index 000000000..3bfcd398e --- /dev/null +++ b/src/portable/chipidea/ci_fs/ci_fs_mcx.h @@ -0,0 +1,47 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CI_FS_MCX_H +#define _CI_FS_MCX_H + +#include "fsl_device_registers.h" + +#define CI_FS_REG(_port) ((ci_fs_regs_t*) USBFS0_BASE) +#define CI_REG CI_FS_REG(0) + +void dcd_int_enable(uint8_t rhport) +{ + (void) rhport; + NVIC_EnableIRQ(USB0_FS_IRQn); +} + +void dcd_int_disable(uint8_t rhport) +{ + (void) rhport; + NVIC_DisableIRQ(USB0_FS_IRQn); +} + +#endif diff --git a/src/portable/chipidea/ci_fs/ci_fs_type.h b/src/portable/chipidea/ci_fs/ci_fs_type.h new file mode 100644 index 000000000..5a5e53fb0 --- /dev/null +++ b/src/portable/chipidea/ci_fs/ci_fs_type.h @@ -0,0 +1,118 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _CI_FS_TYPE_H +#define _CI_FS_TYPE_H + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +// Note: some MCUs can only access these registers in 8-bit mode +// align 4 is used to get rid of reserved fields +#define _va32 volatile TU_ATTR_ALIGNED(4) + +typedef struct { + _va32 uint8_t PER_ID; // [00] Peripheral ID register + _va32 uint8_t ID_COMP; // [04] Peripheral ID complement register + _va32 uint8_t REV; // [08] Peripheral revision register + _va32 uint8_t ADD_INFO; // [0C] Peripheral additional info register + _va32 uint8_t OTG_ISTAT; // [10] OTG Interrupt Status Register + _va32 uint8_t OTG_ICTRL; // [14] OTG Interrupt Control Register + _va32 uint8_t OTG_STAT; // [18] OTG Status Register + _va32 uint8_t OTG_CTRL; // [1C] OTG Control register + uint32_t reserved_20[24]; // [20] + _va32 uint8_t INT_STAT; // [80] Interrupt status register + _va32 uint8_t INT_EN; // [84] Interrupt enable register + _va32 uint8_t ERR_STAT; // [88] Error interrupt status register + _va32 uint8_t ERR_ENB; // [8C] Error interrupt enable register + _va32 uint8_t STAT; // [90] Status register + _va32 uint8_t CTL; // [94] Control register + _va32 uint8_t ADDR; // [98] Address register + _va32 uint8_t BDT_PAGE1; // [9C] BDT page register 1 + _va32 uint8_t FRM_NUML; // [A0] Frame number register + _va32 uint8_t FRM_NUMH; // [A4] Frame number register + _va32 uint8_t TOKEN; // [A8] Token register + _va32 uint8_t SOF_THLD; // [AC] SOF threshold register + _va32 uint8_t BDT_PAGE2; // [B0] BDT page register 2 + _va32 uint8_t BDT_PAGE3; // [B4] BDT page register 3 + + uint32_t reserved_b8; // [B8] + uint32_t reserved_bc; // [BC] + + struct { + _va32 uint8_t CTL; + }EP[16]; // [C0] Endpoint control register + + //----- Following is only found available in NXP Kinetis + _va32 uint8_t USBCTRL; // [100] USB Control register, + _va32 uint8_t OBSERVE; // [104] USB OTG Observe register, + _va32 uint8_t CONTROL; // [108] USB OTG Control register, + _va32 uint8_t USBTRC0; // [10C] USB Transceiver Control Register 0, + uint32_t reserved_110; // [110] + _va32 uint8_t USBFRMADJUST; // [114] Frame Adjust Register, + + //----- Following is only found available in NXP MCX + uint32_t reserved_118[3]; // [118] + _va32 uint8_t KEEP_ALIVE_CTRL; // [124] Keep Alive Mode Control, + _va32 uint8_t KEEP_ALIVE_WKCTRL; // [128] Keep Alive Mode Wakeup Control, + _va32 uint8_t MISCCTRL; // [12C] Miscellaneous Control, + _va32 uint8_t STALL_IL_DIS; // [130] Peripheral Mode Stall Disable for Endpoints[ 7..0] IN + _va32 uint8_t STALL_IH_DIS; // [134] Peripheral Mode Stall Disable for Endpoints[15..8] IN + _va32 uint8_t STALL_OL_DIS; // [138] Peripheral Mode Stall Disable for Endpoints[ 7..0] OUT + _va32 uint8_t STALL_OH_DIS; // [13C] Peripheral Mode Stall Disable for Endpoints[15..8] OUT + _va32 uint8_t CLK_RECOVER_CTRL; // [140] USB Clock Recovery Control, + _va32 uint8_t CLK_RECOVER_IRC_EN; // [144] FIRC Oscillator Enable, + uint32_t reserved_148[3]; // [148] + _va32 uint8_t CLK_RECOVER_INT_EN; // [154] Clock Recovery Combined Interrupt Enable, + uint32_t reserved_158; // [158] + _va32 uint8_t CLK_RECOVER_INT_STATUS; // [15C] Clock Recovery Separated Interrupt Status, +} ci_fs_regs_t; + +TU_VERIFY_STATIC(sizeof(ci_fs_regs_t) == 0x160, "Size is not correct"); + +typedef struct +{ + uint32_t reg_base; + uint32_t irqnum; +} ci_fs_controller_t; + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c new file mode 100644 index 000000000..37265df8b --- /dev/null +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -0,0 +1,555 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUD_ENABLED && defined(TUP_USBIP_CHIPIDEA_FS) + +#include "device/dcd.h" +#include "ci_fs_type.h" + +#if defined(TUP_USBIP_CHIPIDEA_FS_KINETIS) + #include "ci_fs_kinetis.h" +#elif defined(TUP_USBIP_CHIPIDEA_FS_MCX) + #include "ci_fs_mcx.h" +#else + #error "MCU is not supported" +#endif + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +enum { + TOK_PID_OUT = 0x1u, + TOK_PID_IN = 0x9u, + TOK_PID_SETUP = 0xDu, +}; + +typedef struct TU_ATTR_PACKED +{ + union { + uint32_t head; + struct { + union { + struct { + uint16_t : 2; + __IO uint16_t tok_pid : 4; + uint16_t data : 1; + __IO uint16_t own : 1; + uint16_t : 8; + }; + struct { + uint16_t : 2; + uint16_t bdt_stall : 1; + uint16_t dts : 1; + uint16_t ninc : 1; + uint16_t keep : 1; + uint16_t : 10; + }; + }; + __IO uint16_t bc : 10; + uint16_t : 6; + }; + }; + uint8_t *addr; +}buffer_descriptor_t; + +TU_VERIFY_STATIC( sizeof(buffer_descriptor_t) == 8, "size is not correct" ); + +typedef struct TU_ATTR_PACKED +{ + union { + uint32_t state; + struct { + uint32_t max_packet_size :11; + uint32_t : 5; + uint32_t odd : 1; + uint32_t :15; + }; + }; + uint16_t length; + uint16_t remaining; +}endpoint_state_t; + +TU_VERIFY_STATIC( sizeof(endpoint_state_t) == 8, "size is not correct" ); + +typedef struct +{ + union { + /* [#EP][OUT,IN][EVEN,ODD] */ + buffer_descriptor_t bdt[16][2][2]; + uint16_t bda[512]; + }; + TU_ATTR_ALIGNED(4) union { + endpoint_state_t endpoint[16][2]; + endpoint_state_t endpoint_unified[16 * 2]; + }; + uint8_t setup_packet[8]; + uint8_t addr; +}dcd_data_t; + +//--------------------------------------------------------------------+ +// INTERNAL OBJECT & FUNCTION DECLARATION +//--------------------------------------------------------------------+ +// BDT(Buffer Descriptor Table) must be 256-byte aligned +CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; + +TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); + +static void prepare_next_setup_packet(uint8_t rhport) +{ + const unsigned out_odd = _dcd.endpoint[0][0].odd; + const unsigned in_odd = _dcd.endpoint[0][1].odd; + TU_ASSERT(0 == _dcd.bdt[0][0][out_odd].own, ); + + _dcd.bdt[0][0][out_odd].data = 0; + _dcd.bdt[0][0][out_odd ^ 1].data = 1; + _dcd.bdt[0][1][in_odd].data = 1; + _dcd.bdt[0][1][in_odd ^ 1].data = 0; + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), + _dcd.setup_packet, sizeof(_dcd.setup_packet)); +} + +static void process_stall(uint8_t rhport) +{ + for (int i = 0; i < 16; ++i) { + uint32_t const ep_ctl = CI_REG->EP[i].CTL; + + if (ep_ctl & USB_ENDPT_EPSTALL_MASK) { + // prepare next setup if endpoint0 + if ( i == 0 ) prepare_next_setup_packet(rhport); + + // clear stall bit + CI_REG->EP[i].CTL = ep_ctl & ~USB_ENDPT_EPSTALL_MASK; + } + } +} + +static void process_tokdne(uint8_t rhport) +{ + const unsigned s = CI_REG->STAT; + CI_REG->INT_STAT = USB_ISTAT_TOKDNE_MASK; /* fetch the next token if received */ + + uint8_t const epnum = (s >> USB_STAT_ENDP_SHIFT); + uint8_t const dir = (s & USB_STAT_TX_MASK) >> USB_STAT_TX_SHIFT; + unsigned const odd = (s & USB_STAT_ODD_MASK) ? 1 : 0; + + buffer_descriptor_t *bd = (buffer_descriptor_t *)&_dcd.bda[s]; + endpoint_state_t *ep = &_dcd.endpoint_unified[s >> 3]; + + /* fetch pid before discarded by the next steps */ + const unsigned pid = bd->tok_pid; + + /* reset values for a next transfer */ + bd->bdt_stall = 0; + bd->dts = 1; + bd->ninc = 0; + bd->keep = 0; + /* update the odd variable to prepare for the next transfer */ + ep->odd = odd ^ 1; + if (pid == TOK_PID_SETUP) { + dcd_event_setup_received(rhport, bd->addr, true); + CI_REG->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK; + return; + } + + const unsigned bc = bd->bc; + const unsigned remaining = ep->remaining - bc; + if (remaining && bc == ep->max_packet_size) { + /* continue the transferring consecutive data */ + ep->remaining = remaining; + const int next_remaining = remaining - ep->max_packet_size; + if (next_remaining > 0) { + /* prepare to the after next transfer */ + bd->addr += ep->max_packet_size * 2; + bd->bc = next_remaining > ep->max_packet_size ? ep->max_packet_size: next_remaining; + __DSB(); + bd->own = 1; /* the own bit must set after addr */ + } + return; + } + const unsigned length = ep->length; + dcd_event_xfer_complete(rhport, + tu_edpt_addr(epnum, dir), + length - remaining, XFER_RESULT_SUCCESS, true); + if (0 == epnum && 0 == length) { + /* After completion a ZLP of control transfer, + * it prepares for the next steup transfer. */ + if (_dcd.addr) { + /* When the transfer was the SetAddress, + * the device address should be updated here. */ + CI_REG->ADDR = _dcd.addr; + _dcd.addr = 0; + } + prepare_next_setup_packet(rhport); + } +} + +static void process_bus_reset(uint8_t rhport) +{ + CI_REG->USBCTRL &= ~USB_USBCTRL_SUSP_MASK; + CI_REG->CTL |= USB_CTL_ODDRST_MASK; + CI_REG->ADDR = 0; + CI_REG->INT_EN = USB_INTEN_USBRSTEN_MASK | USB_INTEN_TOKDNEEN_MASK | USB_INTEN_SLEEPEN_MASK | + USB_INTEN_ERROREN_MASK | USB_INTEN_STALLEN_MASK; + + CI_REG->EP[0].CTL = USB_ENDPT_EPHSHK_MASK | USB_ENDPT_EPRXEN_MASK | USB_ENDPT_EPTXEN_MASK; + for (unsigned i = 1; i < 16; ++i) { + CI_REG->EP[i].CTL = 0; + } + buffer_descriptor_t *bd = _dcd.bdt[0][0]; + for (unsigned i = 0; i < sizeof(_dcd.bdt)/sizeof(*bd); ++i, ++bd) { + bd->head = 0; + } + const endpoint_state_t ep0 = { + .max_packet_size = CFG_TUD_ENDPOINT0_SIZE, + .odd = 0, + .length = 0, + .remaining = 0, + }; + _dcd.endpoint[0][0] = ep0; + _dcd.endpoint[0][1] = ep0; + tu_memclr(_dcd.endpoint[1], sizeof(_dcd.endpoint) - sizeof(_dcd.endpoint[0])); + _dcd.addr = 0; + prepare_next_setup_packet(rhport); + CI_REG->CTL &= ~USB_CTL_ODDRST_MASK; + dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); +} + +static void process_bus_sleep(uint8_t rhport) +{ + // Enable resume & disable suspend interrupt + const unsigned inten = CI_REG->INT_EN; + + CI_REG->INT_EN = (inten & ~USB_INTEN_SLEEPEN_MASK) | USB_INTEN_RESUMEEN_MASK; + CI_REG->USBTRC0 |= USB_USBTRC0_USBRESMEN_MASK; + CI_REG->USBCTRL |= USB_USBCTRL_SUSP_MASK; + + dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); +} + +static void process_bus_resume(uint8_t rhport) +{ + // Enable suspend & disable resume interrupt + const unsigned inten = CI_REG->INT_EN; + + CI_REG->USBCTRL &= ~USB_USBCTRL_SUSP_MASK; // will also clear USB_USBTRC0_USB_RESUME_INT_MASK + CI_REG->USBTRC0 &= ~USB_USBTRC0_USBRESMEN_MASK; + CI_REG->INT_EN = (inten & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; + + dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); +} + +/*------------------------------------------------------------------*/ +/* Device API + *------------------------------------------------------------------*/ +void dcd_init(uint8_t rhport) +{ + (void) rhport; + + CI_REG->USBTRC0 |= USB_USBTRC0_USBRESET_MASK; + while (CI_REG->USBTRC0 & USB_USBTRC0_USBRESET_MASK); + + tu_memclr(&_dcd, sizeof(_dcd)); + CI_REG->USBTRC0 |= TU_BIT(6); /* software must set this bit to 1 */ + CI_REG->BDT_PAGE1 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); + CI_REG->BDT_PAGE2 = (uint8_t)((uintptr_t)_dcd.bdt >> 16); + CI_REG->BDT_PAGE3 = (uint8_t)((uintptr_t)_dcd.bdt >> 24); + + CI_REG->INT_EN = USB_INTEN_USBRSTEN_MASK; + + dcd_connect(rhport); + // NVIC_ClearPendingIRQ(USB0_IRQn); +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) +{ + _dcd.addr = dev_addr & 0x7F; + /* Response with status first before changing device address */ + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); +} + +void dcd_remote_wakeup(uint8_t rhport) +{ + (void) rhport; + + CI_REG->CTL |= USB_CTL_RESUME_MASK; + + unsigned cnt = SystemCoreClock / 1000; + while (cnt--) __NOP(); + + CI_REG->CTL &= ~USB_CTL_RESUME_MASK; +} + +void dcd_connect(uint8_t rhport) +{ + (void) rhport; + CI_REG->USBCTRL = 0; + CI_REG->CONTROL |= USB_CONTROL_DPPULLUPNONOTG_MASK; + CI_REG->CTL |= USB_CTL_USBENSOFEN_MASK; +} + +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; + CI_REG->CTL = 0; + CI_REG->CONTROL &= ~USB_CONTROL_DPPULLUPNONOTG_MASK; +} + +void dcd_sof_enable(uint8_t rhport, bool en) +{ + (void) rhport; + (void) en; + + // TODO implement later +} + +//--------------------------------------------------------------------+ +// Endpoint API +//--------------------------------------------------------------------+ +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) +{ + (void) rhport; + + const unsigned ep_addr = ep_desc->bEndpointAddress; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + const unsigned xfer = ep_desc->bmAttributes.xfer; + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + const unsigned odd = ep->odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; + + /* No support for control transfer */ + TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL)); + + ep->max_packet_size = tu_edpt_packet_size(ep_desc); + unsigned val = USB_ENDPT_EPCTLDIS_MASK; + val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK: 0; + val |= dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; + CI_REG->EP[epn].CTL |= val; + + if (xfer != TUSB_XFER_ISOCHRONOUS) { + bd[odd].dts = 1; + bd[odd].data = 0; + bd[odd ^ 1].dts = 1; + bd[odd ^ 1].data = 1; + } + + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) +{ + dcd_int_disable(rhport); + + for (unsigned i = 1; i < 16; ++i) { + CI_REG->EP[i].CTL = 0; + } + + dcd_int_enable(rhport); + + buffer_descriptor_t *bd = _dcd.bdt[1][0]; + for (unsigned i = 2; i < sizeof(_dcd.bdt)/sizeof(*bd); ++i, ++bd) { + bd->head = 0; + } + + endpoint_state_t *ep = &_dcd.endpoint[1][0]; + for (unsigned i = 2; i < sizeof(_dcd.endpoint)/sizeof(*ep); ++i, ++ep) { + /* Clear except the odd */ + ep->max_packet_size = 0; + ep->length = 0; + ep->remaining = 0; + } +} + +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) +{ + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; + const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; + + dcd_int_disable(rhport); + + CI_REG->EP[epn].CTL &= ~msk; + ep->max_packet_size = 0; + ep->length = 0; + ep->remaining = 0; + bd[0].head = 0; + bd[1].head = 0; + + dcd_int_enable(rhport); +} + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) +{ + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][ep->odd]; + TU_ASSERT(0 == bd->own); + + dcd_int_disable(rhport); + + ep->length = total_bytes; + ep->remaining = total_bytes; + + const unsigned mps = ep->max_packet_size; + if (total_bytes > mps) { + buffer_descriptor_t *next = ep->odd ? bd - 1: bd + 1; + /* When total_bytes is greater than the max packet size, + * it prepares to the next transfer to avoid NAK in advance. */ + next->bc = total_bytes >= 2 * mps ? mps: total_bytes - mps; + next->addr = buffer + mps; + next->own = 1; + } + bd->bc = total_bytes >= mps ? mps: total_bytes; + bd->addr = buffer; + __DSB(); + bd->own = 1; /* This bit must be set last */ + + dcd_int_enable(rhport); + + return true; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + const unsigned epn = tu_edpt_number(ep_addr); + + if (0 == epn) { + CI_REG->EP[epn].CTL |= USB_ENDPT_EPSTALL_MASK; + } else { + const unsigned dir = tu_edpt_dir(ep_addr); + const unsigned odd = _dcd.endpoint[epn][dir].odd; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][odd]; + TU_ASSERT(0 == bd->own,); + + dcd_int_disable(rhport); + + bd->bdt_stall = 1; + __DSB(); + bd->own = 1; /* This bit must be set last */ + + dcd_int_enable(rhport); + } +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) +{ + const unsigned epn = tu_edpt_number(ep_addr); + TU_VERIFY(epn,); + const unsigned dir = tu_edpt_dir(ep_addr); + const unsigned odd = _dcd.endpoint[epn][dir].odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; + TU_VERIFY(bd[odd].own,); + + dcd_int_disable(rhport); + + bd[odd].own = 0; + __DSB(); + + // clear stall + bd[odd].bdt_stall = 0; + + // Reset data toggle + bd[odd ].data = 0; + bd[odd ^ 1].data = 1; + + // We already cleared this in ISR, but just clear it here to be safe + const uint32_t ep_ctl = CI_REG->EP[epn].CTL; + if (ep_ctl & USB_ENDPT_EPSTALL_MASK) { + CI_REG->EP[epn].CTL = ep_ctl & ~USB_ENDPT_EPSTALL_MASK; + } + + dcd_int_enable(rhport); +} + +//--------------------------------------------------------------------+ +// ISR +//--------------------------------------------------------------------+ +void dcd_int_handler(uint8_t rhport) +{ + uint32_t is = CI_REG->INT_STAT; + uint32_t msk = CI_REG->INT_EN; + + // clear non-enabled interrupts + CI_REG->INT_STAT = is & ~msk; + is &= msk; + + if (is & USB_ISTAT_ERROR_MASK) { + /* TODO: */ + uint32_t es = CI_REG->ERR_STAT; + CI_REG->ERR_STAT = es; + CI_REG->INT_STAT = is; /* discard any pending events */ + } + + if (is & USB_ISTAT_USBRST_MASK) { + CI_REG->INT_STAT = is; /* discard any pending events */ + process_bus_reset(rhport); + } + + if (is & USB_ISTAT_SLEEP_MASK) { + // TU_LOG2("Suspend: "); TU_LOG2_HEX(is); + + // Note Host usually has extra delay after bus reset (without SOF), which could falsely + // detected as Sleep event. Though usbd has debouncing logic so we are good + CI_REG->INT_STAT = USB_ISTAT_SLEEP_MASK; + process_bus_sleep(rhport); + } + +#if 0 // ISTAT_RESUME never trigger, probably for host mode ? + if (is & USB_ISTAT_RESUME_MASK) { + // TU_LOG2("ISTAT Resume: "); TU_LOG2_HEX(is); + KHCI->ISTAT = USB_ISTAT_RESUME_MASK; + process_bus_resume(rhport); + } +#endif + + if (CI_REG->USBTRC0 & USB_USBTRC0_USB_RESUME_INT_MASK) { + // TU_LOG2("USBTRC0 Resume: "); TU_LOG2_HEX(is); TU_LOG2_HEX(KHCI->USBTRC0); + process_bus_resume(rhport); + } + + if (is & USB_ISTAT_SOFTOK_MASK) { + CI_REG->INT_STAT = USB_ISTAT_SOFTOK_MASK; + dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); + } + + if (is & USB_ISTAT_STALL_MASK) { + CI_REG->INT_STAT = USB_ISTAT_STALL_MASK; + process_stall(rhport); + } + + if (is & USB_ISTAT_TOKDNE_MASK) { + process_tokdne(rhport); + } +} + +#endif -- cgit v1.3.1 From a7f330fa94b7a39858f6d770737451b51f061c25 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 16 Jun 2023 14:17:25 +0700 Subject: fix build, update freertos config for cmake --- examples/device/net_lwip_webserver/skip.txt | 2 +- hw/bsp/family_support.cmake | 8 ++------ hw/bsp/imxrt/family.cmake | 4 +--- hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 11 +++++------ hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c | 2 +- hw/bsp/kinetis_kl/family.cmake | 10 ++++++---- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 13 ++++++------- hw/bsp/lpc18/family.cmake | 12 +++++++----- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 13 ++++++------- hw/bsp/lpc55/family.cmake | 20 ++++++-------------- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 13 ++++++------- hw/bsp/mcx/family.cmake | 9 ++++++--- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 13 ++++++------- hw/bsp/nrf/boards/pca10095/board.cmake | 2 +- hw/bsp/nrf/family.cmake | 10 +++++++--- hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h | 13 ++++++------- hw/bsp/stm32g0/family.cmake | 11 ++++++----- hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h | 13 ++++++------- hw/bsp/stm32g4/family.cmake | 10 ++++++---- src/portable/nordic/nrf5x/dcd_nrf5x.c | 14 ++++++++++++++ src/portable/st/typec/typec_stm32.c | 4 ++-- 21 files changed, 107 insertions(+), 100 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 77c7ec63a..e3a726a2b 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -4,7 +4,7 @@ mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 mcu:STM32L0 -mcu:MKL25ZXX +mcu:KINETIS_KL family:broadcom_64bit family:broadcom_32bit board:curiosity_nano diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 02040c4ed..0132ef629 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -192,12 +192,8 @@ function(family_add_freertos TARGET) CFG_TUSB_OS=OPT_OS_FREERTOS ) # link tinyusb with freeRTOS kernel - target_link_libraries(${TARGET}-tinyusb PUBLIC - freertos_kernel - ) - target_link_libraries(${TARGET} PUBLIC - freertos_kernel - ) + target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel) + target_link_libraries(${TARGET} PUBLIC freertos_kernel) endfunction() diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index fc90b7e80..4a9842cf9 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -114,10 +114,8 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) - - # Add TinyUSB Port source target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h index 960bb23e1..a46af1759 100644 --- a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -44,15 +44,14 @@ // skip if included from IAR assembler #ifndef __IASMARM__ -// FIXME cause redundant-decls warnings -extern uint32_t SystemCoreClock; + #include "fsl_device_registers.h" #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c b/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c index 1ba35e0dc..deabe25aa 100644 --- a/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/clock_config.c @@ -83,7 +83,7 @@ board: FRDM-KL25Z * Variables ******************************************************************************/ /* System clock frequency. */ -extern uint32_t SystemCoreClock; +//extern uint32_t SystemCoreClock; /******************************************************************************* * Code diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index f491b3dee..5d4165185 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -87,9 +87,6 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB Port - ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c - ${TOP}/src/portable/nxp/khci/hcd_khci.c # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c @@ -101,8 +98,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c + ${TOP}/src/portable/nxp/khci/hcd_khci.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h index 323c1a0a4..1b3c64e0b 100644 --- a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,17 +42,16 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// IAR assembler have limited preprocessor support and it only need following macros: +// skip if included from IAR assembler #ifndef __IASMARM__ -// FIXME cause redundant-decls warnings -extern uint32_t SystemCoreClock; + #include "chip.h" #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 0 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index bcdec9c01..4e6e2b56d 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -79,10 +79,6 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB Port - ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c - ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c - ${TOP}/src/portable/ehci/ehci.c # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c @@ -94,8 +90,14 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c + ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c + ${TOP}/src/portable/ehci/ehci.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h index 421106f08..b1cef793e 100644 --- a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,17 +42,16 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// IAR assembler have limited preprocessor support and it only need following macros: +// skip if included from IAR assembler #ifndef __IASMARM__ -// FIXME cause redundant-decls warnings -extern uint32_t SystemCoreClock; + #include "fsl_device_registers.h" #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 22a09ce10..43fbe8638 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -16,16 +16,6 @@ set(FAMILY_MCUS LPC55XX CACHE INTERNAL "") # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) -#------------------------------------ -# freertos -#------------------------------------ -if (NOT TARGET freertos_config) - add_library(freertos_config INTERFACE) - target_include_directories(freertos_config SYSTEM INTERFACE - ${CMAKE_CURRENT_LIST_DIR}/FreeRTOSConfig - ) -endif() - #------------------------------------ # BOARD_TARGET @@ -106,8 +96,6 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB Port - ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c @@ -121,15 +109,19 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) - family_flash_nxplink(${TARGET}) + #family_flash_nxplink(${TARGET}) #family_flash_pyocd(${TARGET}) endfunction() diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index 421106f08..b1cef793e 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,17 +42,16 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// IAR assembler have limited preprocessor support and it only need following macros: +// skip if included from IAR assembler #ifndef __IASMARM__ -// FIXME cause redundant-decls warnings -extern uint32_t SystemCoreClock; + #include "fsl_device_registers.h" #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 7c5feaecf..83f44222b 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -88,8 +88,6 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS - ${TOP}/src/portable/chipidea/$ # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c @@ -101,8 +99,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MCXN9) + target_sources(${TARGET}-tinyusb PUBLIC + # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS + ${TOP}/src/portable/chipidea/$ + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) diff --git a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h index 421106f08..a56f243ea 100644 --- a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,17 +42,16 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// IAR assembler have limited preprocessor support and it only need following macros: +// skip if included from IAR assembler #ifndef __IASMARM__ -// FIXME cause redundant-decls warnings -extern uint32_t SystemCoreClock; + #include "nrf.h" #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index 1eb8ad4f1..1e72243c9 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -6,7 +6,7 @@ function(update_board TARGET) NRF5340_XXAA NRF5340_XXAA_APPLICATION ) - target_sources(${TARGET} PUBLIC + target_sources(${TARGET} PRIVATE ${NRFX_DIR}/drivers/src/nrfx_usbreg.c ) endfunction() diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 7faeaf6cb..88670b50b 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -100,8 +100,6 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB Port - ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c @@ -113,8 +111,14 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_NRF5X) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) diff --git a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h index 1758efcf2..c8736f6d1 100644 --- a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,17 +42,16 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// IAR assembler have limited preprocessor support and it only need following macros: +// skip if included from IAR assembler #ifndef __IASMARM__ -// FIXME cause redundant-decls warnings -extern uint32_t SystemCoreClock; + #include "stm32g0xx.h" #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 0 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 988033070..1381eaa5f 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -59,8 +59,6 @@ function(add_board_target BOARD_TARGET) update_board(${BOARD_TARGET}) - cmake_print_variables(CMAKE_C_COMPILER_ID) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" @@ -90,8 +88,6 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB Port - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c @@ -103,8 +99,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/typec/typec_stm32.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) diff --git a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h index 7974434d3..95fcbb08a 100644 --- a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h @@ -42,17 +42,16 @@ * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ -// IAR assembler have limited preprocessor support and it only need following macros: +// skip if included from IAR assembler #ifndef __IASMARM__ -// FIXME cause redundant-decls warnings -extern uint32_t SystemCoreClock; + #include "stm32g4xx.h" #endif /* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 0 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) #define configUSE_PREEMPTION 1 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 618563f66..45525c744 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -88,9 +88,6 @@ function(family_configure_example TARGET) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h target_sources(${TARGET} PUBLIC - # TinyUSB Port - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ${TOP}/src/portable/st/typec/typec_stm32.c # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c @@ -102,8 +99,13 @@ function(family_configure_example TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) - # Add TinyUSB + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/typec/typec_stm32.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index eee5686f4..acc967bb3 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -29,10 +29,24 @@ #if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_NRF5X #include + +// Suppress warning caused by nrfx driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" +#pragma GCC diagnostic ignored "-Wcast-align" +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + #include "nrf.h" #include "nrf_clock.h" #include "nrf_power.h" #include "nrfx_usbd_errata.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + #include "device/dcd.h" // TODO remove later diff --git a/src/portable/st/typec/typec_stm32.c b/src/portable/st/typec/typec_stm32.c index b09dc5bae..231da5450 100644 --- a/src/portable/st/typec/typec_stm32.c +++ b/src/portable/st/typec/typec_stm32.c @@ -186,7 +186,7 @@ bool tcd_init(uint8_t rhport, uint32_t port_type) { v_cc[0] = (UCPD1->SR >> UCPD_SR_TYPEC_VSTATE_CC1_Pos) & 0x03; v_cc[1] = (UCPD1->SR >> UCPD_SR_TYPEC_VSTATE_CC2_Pos) & 0x03; - TU_LOG1("Initial VState CC1 = %u, CC2 = %u\r\n", v_cc[0], v_cc[1]); + TU_LOG1("Initial VState CC1 = %lu, CC2 = %lu\r\n", v_cc[0], v_cc[1]); // Enable CC1 & CC2 Interrupt UCPD1->IMR = UCPD_IMR_TYPECEVT1IE | UCPD_IMR_TYPECEVT2IE; @@ -246,7 +246,7 @@ void tcd_int_handler(uint8_t rhport) { v_cc[0] = (UCPD1->SR >> UCPD_SR_TYPEC_VSTATE_CC1_Pos) & 0x03; v_cc[1] = (UCPD1->SR >> UCPD_SR_TYPEC_VSTATE_CC2_Pos) & 0x03; - TU_LOG3("VState CC1 = %u, CC2 = %u\n", v_cc[0], v_cc[1]); + TU_LOG3("VState CC1 = %lu, CC2 = %lu\n", v_cc[0], v_cc[1]); uint32_t cr = UCPD1->CR; -- cgit v1.3.1 From eb7fcf1b7474fd75f43b2501586c8b6b03354d41 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 24 Jun 2023 18:38:41 +0700 Subject: add CPU_CORE for all family --- hw/bsp/lpc11/family.mk | 7 +------ hw/bsp/lpc13/family.mk | 7 +------ hw/bsp/lpc15/family.mk | 7 +------ hw/bsp/lpc17/family.mk | 7 +------ hw/bsp/lpc18/family.mk | 7 +------ hw/bsp/lpc51/family.mk | 7 +------ hw/bsp/lpc54/family.mk | 9 +-------- hw/bsp/lpc55/family.mk | 9 +-------- hw/bsp/mcx/family.mk | 2 -- hw/bsp/mm32/family.mk | 8 +------- hw/bsp/msp432e4/family.mk | 11 +++-------- hw/bsp/nrf/family.mk | 1 - hw/bsp/ra/boards/ra4m1_ek/board.mk | 6 +----- hw/bsp/ra/boards/ra4m3_ek/board.mk | 6 +----- hw/bsp/ra/family.mk | 4 +--- hw/bsp/samd11/family.mk | 6 +----- hw/bsp/samd21/family.mk | 7 +------ hw/bsp/samd51/family.mk | 9 +-------- hw/bsp/same5x/family.mk | 8 +------- hw/bsp/saml2x/family.mk | 10 ++-------- hw/bsp/tm4c123/family.mk | 9 +-------- hw/bsp/xmc4000/family.mk | 10 +--------- 22 files changed, 23 insertions(+), 134 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/lpc11/family.mk b/hw/bsp/lpc11/family.mk index eb427c09d..dee85da90 100644 --- a/hw/bsp/lpc11/family.mk +++ b/hw/bsp/lpc11/family.mk @@ -2,12 +2,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen MCU_DIR = hw/mcu/nxp/lpcopen/lpc$(MCU)/lpc_chip_$(MCU) include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m0plus CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ -nostdlib \ -D__USE_LPCOPEN \ -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ @@ -36,8 +34,5 @@ endif INC += \ $(TOP)/$(MCU_DIR)/inc -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - # For flash-jlink target JLINK_DEVICE = LPC11U68 diff --git a/hw/bsp/lpc13/family.mk b/hw/bsp/lpc13/family.mk index 28f98e4ca..10cf4969d 100644 --- a/hw/bsp/lpc13/family.mk +++ b/hw/bsp/lpc13/family.mk @@ -2,12 +2,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m3 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ -nostdlib \ -DCORE_M3 \ -D__USE_LPCOPEN \ @@ -34,6 +32,3 @@ SRC_C += \ INC += \ $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk index 0ad1220d6..9f489832f 100644 --- a/hw/bsp/lpc15/family.mk +++ b/hw/bsp/lpc15/family.mk @@ -1,12 +1,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m3 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ -nostdlib \ -DCORE_M3 \ -D__USE_LPCOPEN \ @@ -34,6 +32,3 @@ SRC_C += \ INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index af01b55a8..abf6abe13 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -2,12 +2,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m3 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ -nostdlib \ -DCORE_M3 \ -D__USE_LPCOPEN \ @@ -35,6 +33,3 @@ SRC_C += \ INC += \ $(TOP)/$(MCU_DIR)/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index fbe6ad834..9d0f85c20 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -1,12 +1,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m3 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ -nostdlib \ -DCORE_M3 \ -D__USE_LPCOPEN \ @@ -32,6 +30,3 @@ INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/$(MCU_DIR)/inc \ $(TOP)/$(MCU_DIR)/inc/config_18xx - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 diff --git a/hw/bsp/lpc51/family.mk b/hw/bsp/lpc51/family.mk index bfca2f6b1..df5a9958e 100644 --- a/hw/bsp/lpc51/family.mk +++ b/hw/bsp/lpc51/family.mk @@ -3,12 +3,10 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 MCU_DIR = $(SDK_DIR)/devices/$(MCU) include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m0plus CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ -DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' @@ -40,6 +38,3 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index f52b9b5eb..7d8bb86cd 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -2,14 +2,10 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' @@ -49,6 +45,3 @@ INC += \ $(TOP)/$(SDK_DIR)/drivers/lpc_gpio SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index f9dabcfa3..a87fa5acf 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -3,17 +3,13 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk DEPS_SUBMODULES += lib/CMSIS_5 lib/sct_neopixel $(SDK_DIR) include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m33 # Default to Highspeed PORT1 PORT ?= 1 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m33 \ - -mfloat-abi=hard \ - -mfpu=fpv5-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' \ -DBOARD_TUD_RHPORT=$(PORT) @@ -63,6 +59,3 @@ INC += \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index 2722c2038..e384aa8eb 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -4,9 +4,7 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk - CPU_CORE ?= cortex-m33 -include $(TOP)/tools/make/cpu/$(CPU_CORE).mk # Default to Highspeed PORT1 PORT ?= 1 diff --git a/hw/bsp/mm32/family.mk b/hw/bsp/mm32/family.mk index 81af0d166..d5b6e315a 100644 --- a/hw/bsp/mm32/family.mk +++ b/hw/bsp/mm32/family.mk @@ -3,13 +3,10 @@ SDK_DIR = hw/mcu/mindmotion/mm32sdk DEPS_SUBMODULES += lib/CMSIS_5 $(SDK_DIR) include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m3 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -mfloat-abi=soft \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_MM32F327X @@ -29,8 +26,5 @@ INC += \ $(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/Include \ $(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Inc -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3 - # flash target using on-board flash: flash-jlink diff --git a/hw/bsp/msp432e4/family.mk b/hw/bsp/msp432e4/family.mk index 2383bc604..b5ade6a52 100644 --- a/hw/bsp/msp432e4/family.mk +++ b/hw/bsp/msp432e4/family.mk @@ -1,13 +1,11 @@ DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/ti +#include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 + CFLAGS += \ -flto \ - -mthumb \ -mslow-flash-data \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ -D__MSP432E401Y__ \ -DCFG_TUSB_MCU=OPT_MCU_MSP432E4 @@ -33,9 +31,6 @@ INC += \ SRC_S += $(MCU_DIR)/Source/startup_msp432e411y_gcc.S -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - # For flash-jlink target JLINK_DEVICE = MSP432E401Y JLINK_IF = SWD diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index 6d067e1c2..cdcfe39bd 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -5,7 +5,6 @@ include $(TOP)/$(BOARD_PATH)/board.mk # nRF52 is cortex-m4, nRF53 is cortex-m33 CPU_CORE ?= cortex-m4 -include $(TOP)/tools/make/cpu/$(CPU_CORE).mk CFLAGS += \ -flto \ diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.mk b/hw/bsp/ra/boards/ra4m1_ek/board.mk index 6a661c0b8..5c193513d 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/board.mk +++ b/hw/bsp/ra/boards/ra4m1_ek/board.mk @@ -1,8 +1,4 @@ -CFLAGS += \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_RAXXX +CPU_CORE = cortex-m4 FSP_MCU_DIR = hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/ra4m1 FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m1_ek diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.mk b/hw/bsp/ra/boards/ra4m3_ek/board.mk index d668db0ea..264f29c1a 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.mk +++ b/hw/bsp/ra/boards/ra4m3_ek/board.mk @@ -1,8 +1,4 @@ -CFLAGS += \ - -mcpu=cortex-m33 \ - -mfloat-abi=hard \ - -mfpu=fpv5-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_RAXXX +CPU_CORE = cortex-m33 FSP_MCU_DIR = hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/ra4m3 FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m3_ek diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index d48272e61..b65c95191 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -1,11 +1,9 @@ DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5 -# Cross Compiler for RA -CROSS_COMPILE = arm-none-eabi- - include $(TOP)/$(BOARD_PATH)/board.mk CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_RAXXX \ -Wno-error=undef \ -Wno-error=strict-prototypes \ -Wno-error=cast-align \ diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index a2a5268aa..43a60a122 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -1,11 +1,10 @@ DEPS_SUBMODULES += hw/mcu/microchip include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m0plus CFLAGS += \ -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ -nostdlib -nostartfiles \ -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ -DOSC32K_OVERWRITE_CALIBRATION=0 \ @@ -40,6 +39,3 @@ INC += \ $(TOP)/hw/mcu/microchip/samd11/hri \ $(TOP)/hw/mcu/microchip/samd11/CMSIS/Include \ $(TOP)/hw/mcu/microchip/samd11/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 30eccacb2..49a1a781a 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -2,12 +2,10 @@ UF2_FAMILY_ID = 0x68ed2b88 DEPS_SUBMODULES += hw/mcu/microchip include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m0plus CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ -nostdlib -nostartfiles \ -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ -DCFG_TUSB_MCU=OPT_MCU_SAMD21 @@ -39,9 +37,6 @@ INC += \ $(TOP)/hw/mcu/microchip/samd21/hri \ $(TOP)/hw/mcu/microchip/samd21/CMSIS/Include -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ # Add it to your PATH or change BOSSAC variable to match your installation diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk index 657e33438..9a6c67e1a 100644 --- a/hw/bsp/samd51/family.mk +++ b/hw/bsp/samd51/family.mk @@ -2,14 +2,10 @@ UF2_FAMILY_ID = 0x55114460 DEPS_SUBMODULES += hw/mcu/microchip include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_SAMD51 @@ -37,9 +33,6 @@ INC += \ $(TOP)/hw/mcu/microchip/samd51/hri \ $(TOP)/hw/mcu/microchip/samd51/CMSIS/Include -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ # Add it to your PATH or change BOSSAC variable to match your installation diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk index df1af4a9d..691863f11 100644 --- a/hw/bsp/same5x/family.mk +++ b/hw/bsp/same5x/family.mk @@ -2,14 +2,11 @@ DEPS_SUBMODULES += hw/mcu/microchip SDK_DIR = hw/mcu/microchip/$(MCU) include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 CFLAGS += \ -mthumb \ - -mabi=aapcs \ -mlong-calls \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_SAME5X @@ -32,9 +29,6 @@ INC += \ $(TOP)/$(SDK_DIR)/hri \ $(TOP)/$(SDK_DIR)/CMSIS/Include -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - # flash using edbg from https://github.com/ataradov/edbg flash-edbg: $(BUILD)/$(PROJECT).bin edbg --verbose -t $(MCU) -pv -f $< diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index 62e5f8f4a..0acb0ed14 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -1,14 +1,11 @@ UF2_FAMILY_ID = 0x68ed2b88 DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/microchip +MCU_DIR = hw/mcu/microchip/$(SAML_VARIANT) include $(TOP)/$(BOARD_PATH)/board.mk - -MCU_DIR = hw/mcu/microchip/$(SAML_VARIANT) +CPU_CORE ?= cortex-m0plus CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ -nostdlib -nostartfiles \ -DCONF_OSC32K_CALIB_ENABLE=0 \ -DCFG_TUSB_MCU=OPT_MCU_SAML22 @@ -41,9 +38,6 @@ INC += \ $(TOP)/$(MCU_DIR)/hri \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0 - # flash using bossac at least version 1.8 # can be found in arduino15/packages/arduino/tools/bossac/ # Add it to your PATH or change BOSSAC variable to match your installation diff --git a/hw/bsp/tm4c123/family.mk b/hw/bsp/tm4c123/family.mk index 021b47fd3..608c530bb 100644 --- a/hw/bsp/tm4c123/family.mk +++ b/hw/bsp/tm4c123/family.mk @@ -1,14 +1,10 @@ DEPS_SUBMODULES += hw/mcu/ti include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_TM4C123 \ -uvectors \ -DTM4C123GH6PM @@ -31,6 +27,3 @@ SRC_C += \ src/portable/mentor/musb/hcd_musb.c \ $(MCU_DIR)/Source/system_TM4C123.c \ $(MCU_DIR)/Source/GCC/tm4c123_startup.c - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F diff --git a/hw/bsp/xmc4000/family.mk b/hw/bsp/xmc4000/family.mk index 1094f3b72..35c3a58b7 100644 --- a/hw/bsp/xmc4000/family.mk +++ b/hw/bsp/xmc4000/family.mk @@ -4,14 +4,10 @@ MCU_DIR = hw/mcu/infineon/mtb-xmclib-cat3 DEPS_SUBMODULES += $(MCU_DIR) include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 CFLAGS += \ -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_XMC4000 @@ -27,7 +23,6 @@ SRC_C += \ $(MCU_DIR)/XMCLib/src/xmc4_gpio.c \ $(MCU_DIR)/XMCLib/src/xmc4_scu.c - SRC_S += $(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Source/TOOLCHAIN_GCC_ARM/startup_$(MCU_VARIANT).S INC += \ @@ -35,6 +30,3 @@ INC += \ $(TOP)/$(MCU_DIR)/CMSIS/Core/Include \ $(TOP)/$(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Include \ $(TOP)/$(MCU_DIR)/XMCLib/inc - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F -- cgit v1.3.1 From e43387abaca2044f96017481ccb00b3b68dbdc2a Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 27 Jun 2023 15:45:38 +0700 Subject: rework cmake with rtos support add RTOS to family_configure_device/host/dual_example() --- examples/device/audio_4_channel_mic/CMakeLists.txt | 6 +- examples/device/audio_test/CMakeLists.txt | 6 +- .../device/audio_test_multi_rate/CMakeLists.txt | 6 +- examples/device/board_test/CMakeLists.txt | 6 +- examples/device/cdc_dual_ports/CMakeLists.txt | 6 +- examples/device/cdc_msc/CMakeLists.txt | 2 +- examples/device/cdc_msc_freertos/CMakeLists.txt | 9 +- examples/device/dfu/CMakeLists.txt | 6 +- examples/device/dfu_runtime/CMakeLists.txt | 6 +- .../device/dynamic_configuration/CMakeLists.txt | 6 +- examples/device/hid_boot_interface/CMakeLists.txt | 6 +- examples/device/hid_composite/CMakeLists.txt | 6 +- .../device/hid_composite_freertos/CMakeLists.txt | 9 +- examples/device/hid_generic_inout/CMakeLists.txt | 6 +- .../device/hid_multiple_interface/CMakeLists.txt | 6 +- examples/device/midi_test/CMakeLists.txt | 6 +- examples/device/msc_dual_lun/CMakeLists.txt | 6 +- examples/device/net_lwip_webserver/CMakeLists.txt | 6 +- examples/device/uac2_headset/CMakeLists.txt | 6 +- examples/device/usbtmc/CMakeLists.txt | 6 +- examples/device/video_capture/CMakeLists.txt | 6 +- examples/device/webusb_serial/CMakeLists.txt | 6 +- .../dual/host_hid_to_device_cdc/CMakeLists.txt | 6 +- examples/host/bare_api/CMakeLists.txt | 6 +- examples/host/cdc_msc_hid/CMakeLists.txt | 6 +- examples/host/hid_controller/CMakeLists.txt | 6 +- examples/host/msc_file_explorer/CMakeLists.txt | 6 +- examples/typec/power_delivery/CMakeLists.txt | 6 +- examples/typec/power_delivery/src/tusb_config.h | 14 +- hw/bsp/family_support.cmake | 164 ++++++++++++--------- hw/bsp/imxrt/family.cmake | 19 +-- hw/bsp/kinetis_kl/family.cmake | 19 +-- hw/bsp/lpc18/family.cmake | 19 +-- hw/bsp/lpc55/family.cmake | 19 +-- hw/bsp/mcx/family.cmake | 19 +-- hw/bsp/nrf/family.cmake | 19 +-- hw/bsp/rp2040/family.cmake | 43 ++++-- hw/bsp/stm32f0/family.cmake | 19 +-- hw/bsp/stm32f1/family.cmake | 19 +-- hw/bsp/stm32f7/family.cmake | 19 +-- hw/bsp/stm32g0/family.cmake | 19 +-- hw/bsp/stm32g4/family.cmake | 19 +-- hw/bsp/stm32h7/family.cmake | 19 +-- hw/bsp/stm32l4/family.cmake | 19 +-- src/common/tusb_compiler.h | 8 +- test/fuzz/device/cdc/CMakeLists.txt | 18 +-- test/fuzz/device/msc/CMakeLists.txt | 6 +- test/fuzz/device/net/CMakeLists.txt | 6 +- 48 files changed, 272 insertions(+), 404 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index 87b7d07d4..f61e1b640 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -28,6 +28,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index 87b7d07d4..f61e1b640 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -28,6 +28,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/audio_test_multi_rate/CMakeLists.txt b/examples/device/audio_test_multi_rate/CMakeLists.txt index 87b7d07d4..f61e1b640 100644 --- a/examples/device/audio_test_multi_rate/CMakeLists.txt +++ b/examples/device/audio_test_multi_rate/CMakeLists.txt @@ -28,6 +28,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index 4ab8d5a65..012eff095 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index 87b7d07d4..f61e1b640 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -28,6 +28,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 4ec172f17..9415f8c68 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -32,4 +32,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/cdc_msc_freertos/CMakeLists.txt b/examples/device/cdc_msc_freertos/CMakeLists.txt index 319ad0356..33c7a1ec0 100644 --- a/examples/device/cdc_msc_freertos/CMakeLists.txt +++ b/examples/device/cdc_msc_freertos/CMakeLists.txt @@ -30,9 +30,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) - -# Add FreeRTOS for this example -family_add_freertos(${PROJECT}) +# Configure compilation flags and libraries for the example with FreeRTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} freertos) diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index eb4c198d6..a01eb3456 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index eb4c198d6..a01eb3456 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index 046a32257..2b20d2234 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -28,6 +28,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index eb4c198d6..a01eb3456 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index eb4c198d6..a01eb3456 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/hid_composite_freertos/CMakeLists.txt b/examples/device/hid_composite_freertos/CMakeLists.txt index 211904cf9..eb22014fb 100644 --- a/examples/device/hid_composite_freertos/CMakeLists.txt +++ b/examples/device/hid_composite_freertos/CMakeLists.txt @@ -29,9 +29,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) - -# Add FreeRTOS for this example -family_add_freertos(${PROJECT}) +# Configure compilation flags and libraries for the example with FreeRTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} freertos) diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index eb4c198d6..a01eb3456 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index eb4c198d6..a01eb3456 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index 5b1a5547d..e51f14c02 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -26,6 +26,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index dc8d5512c..e69fead35 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -29,6 +29,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 2c21aa52b..1e34428fe 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -88,6 +88,6 @@ elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") endif () -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index d142e9c04..e92a57148 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -28,6 +28,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index a6b22ab36..a63ca2d81 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -29,6 +29,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index e0bd975c4..80dc39ca5 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -34,6 +34,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index d142e9c04..e92a57148 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -28,6 +28,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index c6d19a720..a6557c2d0 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -23,9 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_dual_usb_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_dual_usb_example(${PROJECT} noos) # due to warnings from Pico-PIO-USB target_compile_options(${PROJECT} PUBLIC diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index b6d8c9c89..95af48718 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -22,9 +22,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} noos) # Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host if(FAMILY STREQUAL "rp2040") diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index 68b52e274..3fdc832ab 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -25,9 +25,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} noos) # Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host if(FAMILY STREQUAL "rp2040") diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index e27f83c53..d1d901b53 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -23,9 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} noos) # Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host if(FAMILY STREQUAL "rp2040") diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index 327d1218a..99c797275 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -35,9 +35,9 @@ target_include_directories(${PROJECT} PUBLIC ${TOP}/lib/embedded-cli ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_host_example(${PROJECT} noos) # Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host if(FAMILY STREQUAL "rp2040") diff --git a/examples/typec/power_delivery/CMakeLists.txt b/examples/typec/power_delivery/CMakeLists.txt index 4ab8d5a65..012eff095 100644 --- a/examples/typec/power_delivery/CMakeLists.txt +++ b/examples/typec/power_delivery/CMakeLists.txt @@ -27,6 +27,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/examples/typec/power_delivery/src/tusb_config.h b/examples/typec/power_delivery/src/tusb_config.h index deddcbfa4..f7cb3cc04 100644 --- a/examples/typec/power_delivery/src/tusb_config.h +++ b/examples/typec/power_delivery/src/tusb_config.h @@ -30,11 +30,6 @@ extern "C" { #endif -// special example that doesn't enable device or host stack -// This can cause some TinyUSB API missing, this define hack to allow us to fill those API -// to pass the compilation process -#define tud_int_handler(x) - //-------------------------------------------------------------------- // COMMON CONFIGURATION //-------------------------------------------------------------------- @@ -54,6 +49,15 @@ // Enable TYPEC stack #define CFG_TUC_ENABLED 1 + +// special example that doesn't enable device or host stack +// This can cause some TinyUSB API missing, this define hack to allow us to fill those API +// to pass the compilation process +#if CFG_TUD_ENABLED == 0 +#define tud_int_handler(x) +#endif + + // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 93cab8723..781c67bf7 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -64,6 +64,8 @@ set(WARNING_FLAGS_GNU set(WARNINGS_FLAGS_IAR "") + +# Filter example based on only.txt and skip.txt function(family_filter RESULT DIR) get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR}) @@ -142,112 +144,136 @@ function(family_initialize_project PROJECT DIR) endfunction() -# Add segger rtt to example -function(family_add_segger_rtt TARGET) - if (NOT TARGET segger_rtt) - add_library(segger_rtt STATIC - ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c - ) - target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) - endif() +#------------------------------------------------------------- +# Common Target Configure +# Most families use these settings except rp2040 and espressif +#------------------------------------------------------------- + +# Add RTOS to example +function(family_add_rtos TARGET RTOS) + if (RTOS STREQUAL "freertos") + # freertos config + if (NOT TARGET freertos_config) + add_library(freertos_config INTERFACE) + target_include_directories(freertos_config INTERFACE ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig) + # add board definition to freertos_config mostly for SystemCoreClock + target_link_libraries(freertos_config INTERFACE board_${BOARD}) + endif() + + # freertos kernel + if (NOT TARGET freertos_kernel) + add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) + endif () - target_link_libraries(${TARGET} PUBLIC segger_rtt) + target_link_libraries(${TARGET} PUBLIC freertos_kernel) + endif () endfunction() -#------------------------------------ -# Main target configure -#------------------------------------ # Add common configuration to example -function(family_configure_common TARGET) +function(family_configure_common TARGET RTOS) + family_add_rtos(${TARGET} ${RTOS}) + # run size after build add_custom_command(TARGET ${TARGET} POST_BUILD COMMAND ${CMAKE_SIZE} $ ) + # Add warnings flags target_compile_options(${TARGET} PUBLIC ${WARNING_FLAGS_${CMAKE_C_COMPILER_ID}}) + # Generate linker map file if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - # Generate map file - target_link_options(${TARGET} PUBLIC - # link map - "LINKER:-Map=$.map" - ) + target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") endif() - # LOGGER - if (DEFINED LOGGER) - target_compile_definitions(${TARGET} PUBLIC LOGGER_${LOGGER}) - if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt") - family_add_segger_rtt(${TARGET}) - endif () - endif () - - # ETM Trace + # ETM Trace option if (TRACE_ETM STREQUAL "1") target_compile_definitions(${TARGET} PUBLIC TRACE_ETM) endif () -endfunction() - - -# configure an executable target to link to tinyusb in device mode, and add the board implementation -function(family_configure_device_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake -endfunction() - + # LOGGER option + if (DEFINED LOGGER) + target_compile_definitions(${TARGET} PUBLIC LOGGER_${LOGGER}) -# configure an executable target to link to tinyusb in host mode, and add the board implementation -function(family_configure_host_example TARGET) - # default implementation is empty, the function should be redefined in the FAMILY/family.cmake + # Add segger rtt to example + if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt") + if (NOT TARGET segger_rtt) + add_library(segger_rtt STATIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) + target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) + endif() + target_link_libraries(${TARGET} PUBLIC segger_rtt) + endif () + endif () endfunction() # Add tinyusb to example -function(family_add_tinyusb TARGET OPT_MCU) +function(family_add_tinyusb TARGET OPT_MCU RTOS) # tinyusb target is built for each example since it depends on example's tusb_config.h set(TINYUSB_TARGET_PREFIX ${TARGET}-) add_library(${TARGET}-tinyusb_config INTERFACE) + # path to tusb_config.h target_include_directories(${TARGET}-tinyusb_config INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}/src) target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_MCU=${OPT_MCU}) + if (DEFINED LOG) target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_DEBUG=${LOG}) endif() + if (RTOS STREQUAL "freertos") + target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_OS=OPT_OS_FREERTOS) + endif () + # tinyusb's CMakeList.txt add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + + if (RTOS STREQUAL "freertos") + # link tinyusb with freeRTOS kernel + target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel) + endif () endfunction() -# Add freeRTOS support to example -function(family_add_freertos TARGET) - # freeros config - if (NOT TARGET freertos_config) - add_library(freertos_config INTERFACE) - target_include_directories(freertos_config INTERFACE - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig - ) - # add board definition to freertos_config mostly for SystemCoreClock - target_link_libraries(freertos_config INTERFACE board_${BOARD}) - endif() +# Add bin/hex output +function(family_add_bin_hex TARGET) + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${CMAKE_OBJCOPY} -Obinary $ $/${TARGET}.bin + COMMAND ${CMAKE_OBJCOPY} -Oihex $ $/${TARGET}.hex + VERBATIM) +endfunction() - # freertos kernel should be generic as freertos_config however, CMAKE complains with missing variable - # such as CMAKE_C_COMPILE_OBJECT - if (NOT TARGET freertos_kernel) - add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) - endif () - # Add FreeRTOS option to tinyusb_config - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE - CFG_TUSB_OS=OPT_OS_FREERTOS - ) - # link tinyusb with freeRTOS kernel - target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel) - target_link_libraries(${TARGET} PUBLIC freertos_kernel) +#---------------------------------- +# Example Target Configure (Default rule) +# These function can be redefined in FAMILY/family.cmake +#---------------------------------- + +function(family_configure_example TARGET RTOS) + # empty function, should be redefined in FAMILY/family.cmake +endfunction() + +# Configure device example with RTOS +function(family_configure_device_example TARGET RTOS) + family_configure_example(${TARGET} ${RTOS}) +endfunction() + + +# Configure host example with RTOS +function(family_configure_host_example TARGET RTOS) + family_configure_example(${TARGET} ${RTOS}) endfunction() +# Configure host + device example with RTOS +function(family_configure_dual_usb_example TARGET RTOS) + family_configure_example(${TARGET} ${RTOS}) +endfunction() + +#---------------------------------- +# RPI specific: refactor later +#---------------------------------- function(family_add_default_example_warnings TARGET) target_compile_options(${TARGET} PUBLIC -Wall @@ -294,16 +320,6 @@ function(family_add_default_example_warnings TARGET) endif() endfunction() - -# Add bin/hex output -function(family_add_bin_hex TARGET) - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${CMAKE_OBJCOPY} -Obinary $ $/${TARGET}.bin - COMMAND ${CMAKE_OBJCOPY} -Oihex $ $/${TARGET}.hex - VERBATIM) -endfunction() - - #---------------------------------- # Flashing target #---------------------------------- @@ -374,6 +390,10 @@ function(family_flash_nxplink TARGET) endfunction() +#---------------------------------- +# Family specific +#---------------------------------- + # family specific: can override above functions include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 4a9842cf9..aaedfc9d6 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -94,8 +94,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -115,7 +115,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) + family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -130,16 +130,3 @@ function(family_configure_example TARGET) family_flash_jlink(${TARGET}) #family_flash_nxplink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 5d4165185..4df3d1ed1 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -78,8 +78,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -99,7 +99,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c @@ -113,16 +113,3 @@ function(family_configure_example TARGET) family_flash_jlink(${TARGET}) #family_flash_nxplink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 4e6e2b56d..da71a0e5d 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -70,8 +70,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -91,7 +91,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) + family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -106,16 +106,3 @@ function(family_configure_example TARGET) family_flash_jlink(${TARGET}) #family_flash_nxplink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index e443f47d3..dfd08a732 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -87,8 +87,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -117,7 +117,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX) + family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) @@ -131,16 +131,3 @@ function(family_configure_example TARGET) #family_flash_nxplink(${TARGET}) #family_flash_pyocd(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 83f44222b..f548ac4f3 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -79,8 +79,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -100,7 +100,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MCXN9) + family_add_tinyusb(${TARGET} OPT_MCU_MCXN9 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS ${TOP}/src/portable/chipidea/$ @@ -115,16 +115,3 @@ function(family_configure_example TARGET) #family_flash_nxplink(${TARGET}) #family_flash_pyocd(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 825380d0b..30fd41d7b 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -97,8 +97,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -118,7 +118,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_NRF5X) + family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c ) @@ -132,16 +132,3 @@ function(family_configure_example TARGET) # Flashing family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 2d37f8be9..b986b3ebb 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -11,6 +11,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/pico_sdk_import.cmake) # include basic family CMake functionality set(FAMILY_MCUS RP2040) +set(JLINK_DEVICE rp2040_m0_0) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -143,12 +144,23 @@ endif() # Functions #------------------------------------ -function(family_configure_target TARGET) +function(family_configure_target TARGET RTOS) + if (RTOS STREQUAL noos OR RTOS STREQUAL "") + set(RTOS_SUFFIX "") + else() + set(RTOS_SUFFIX _${RTOS}) + endif() + # export RTOS_SUFFIX to parent scope + set(RTOS_SUFFIX ${RTOS_SUFFIX} PARENT_SCOPE) + pico_add_extra_outputs(${TARGET}) pico_enable_stdio_uart(${TARGET} 1) - target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board tinyusb_additions) + target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board${RTOS_SUFFIX} tinyusb_additions) + + family_flash_jlink(${TARGET}) endfunction() + function(rp2040_family_configure_example_warnings TARGET) if (NOT PICO_TINYUSB_NO_EXAMPLE_WARNINGS) family_add_default_example_warnings(${TARGET}) @@ -159,19 +171,22 @@ function(rp2040_family_configure_example_warnings TARGET) suppress_tinyusb_warnings() endfunction() -function(family_configure_device_example TARGET) - family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device) + +function(family_configure_device_example TARGET RTOS) + family_configure_target(${TARGET} ${RTOS}) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device${RTOS_SUFFIX}) rp2040_family_configure_example_warnings(${TARGET}) endfunction() + function(family_add_pico_pio_usb TARGET) target_link_libraries(${TARGET} PUBLIC tinyusb_pico_pio_usb) endfunction() -function(family_configure_host_example TARGET) - family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) + +function(family_configure_host_example TARGET RTOS) + family_configure_target(${TARGET} ${RTOS}) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host${RTOS_SUFFIX}) rp2040_family_configure_example_warnings(${TARGET}) # For rp2040 enable pico-pio-usb @@ -183,13 +198,15 @@ function(family_configure_host_example TARGET) endif() endfunction() -function(family_configure_dual_usb_example TARGET) - family_configure_target(${TARGET}) + +function(family_configure_dual_usb_example TARGET RTOS) + family_configure_target(${TARGET} ${RTOS}) # require tinyusb_pico_pio_usb target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_host tinyusb_pico_pio_usb ) rp2040_family_configure_example_warnings(${TARGET}) endfunction() + function(check_and_add_pico_pio_usb_support) # check for pico_generate_pio_header (as depending on environment we may be called before SDK is # initialized in which case it isn't available yet), and only do the initialization once @@ -243,6 +260,7 @@ endfunction() # when included by the SDK itself) check_and_add_pico_pio_usb_support() + function(family_initialize_project PROJECT DIR) # call the original version of this function from family_common.cmake _family_initialize_project(${PROJECT} ${DIR}) @@ -253,6 +271,7 @@ function(family_initialize_project PROJECT DIR) check_and_add_pico_pio_usb_support() endfunction() + # This method must be called from the project scope to suppress known warnings in TinyUSB source files function(suppress_tinyusb_warnings) # some of these are pretty silly warnings only occurring in some older GCC versions 9 or prior @@ -327,7 +346,3 @@ function(suppress_tinyusb_warnings) COMPILE_FLAGS "-Wno-cast-qual") endif() endfunction() - -# rp2040 does not support freeRTOS example yet -function(family_add_freertos TARGET) -endfunction() diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index ecf6a8424..73f43de82 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -84,8 +84,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -105,7 +105,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F0) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F0 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) @@ -118,16 +118,3 @@ function(family_configure_example TARGET) family_flash_stlink(${TARGET}) #family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index ab46c9872..efe41bc1b 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -81,8 +81,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -102,7 +102,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F1) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F1 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) @@ -115,16 +115,3 @@ function(family_configure_example TARGET) family_flash_stlink(${TARGET}) #family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 3b6ba1a15..30bde9b0d 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -86,8 +86,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -107,7 +107,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F7) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F7 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ) @@ -120,16 +120,3 @@ function(family_configure_example TARGET) family_flash_stlink(${TARGET}) family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index fa93566bf..f7b665090 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -84,8 +84,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -105,7 +105,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) + family_add_tinyusb(${TARGET} OPT_MCU_STM32G0 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c @@ -119,16 +119,3 @@ function(family_configure_example TARGET) family_flash_stlink(${TARGET}) #family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index c89993f6d..3c7633d64 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -84,8 +84,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -105,7 +105,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) + family_add_tinyusb(${TARGET} OPT_MCU_STM32G4 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c @@ -119,16 +119,3 @@ function(family_configure_example TARGET) family_flash_stlink(${TARGET}) family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index f3705edb4..1a8c4354c 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -89,8 +89,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -110,7 +110,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32H7) + family_add_tinyusb(${TARGET} OPT_MCU_STM32H7 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ) @@ -123,16 +123,3 @@ function(family_configure_example TARGET) family_flash_stlink(${TARGET}) family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 83c51c9bf..da017cdde 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -86,8 +86,8 @@ endfunction() #------------------------------------ # Functions #------------------------------------ -function(family_configure_example TARGET) - family_configure_common(${TARGET}) +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) # Board target add_board_target(board_${BOARD}) @@ -107,7 +107,7 @@ function(family_configure_example TARGET) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS} ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -121,16 +121,3 @@ function(family_configure_example TARGET) family_flash_stlink(${TARGET}) family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 5ab56e145..6f07bdd53 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -128,7 +128,9 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) - #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) + #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug + #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) + #endif #define TU_ATTR_DEPRECATED(mess) __attribute__ ((deprecated(mess))) // warn if function with this attribute is used #define TU_ATTR_UNUSED __attribute__ ((unused)) // Function/Variable is meant to be possibly unused #define TU_ATTR_USED __attribute__ ((used)) // Function/Variable is meant to be used @@ -205,7 +207,9 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) - #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) + #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug + #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) + #endif #define TU_ATTR_DEPRECATED(mess) __attribute__ ((deprecated(mess))) // warn if function with this attribute is used #define TU_ATTR_UNUSED __attribute__ ((unused)) // Function/Variable is meant to be possibly unused #define TU_ATTR_USED __attribute__ ((used)) // Function/Variable is meant to be used diff --git a/test/fuzz/device/cdc/CMakeLists.txt b/test/fuzz/device/cdc/CMakeLists.txt index 8e4db9d29..c60f292b9 100644 --- a/test/fuzz/device/cdc/CMakeLists.txt +++ b/test/fuzz/device/cdc/CMakeLists.txt @@ -14,16 +14,16 @@ add_executable(${PROJECT}) # Example source target_sources(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c - ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/msc_disk.c + ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c + ) # Example include target_include_directories(${PROJECT} PUBLIC - ${CMAKE_CURRENT_SOURCE_DIR}/src - ) + ${CMAKE_CURRENT_SOURCE_DIR}/src + ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/test/fuzz/device/msc/CMakeLists.txt b/test/fuzz/device/msc/CMakeLists.txt index 8e4db9d29..8bff217cb 100644 --- a/test/fuzz/device/msc/CMakeLists.txt +++ b/test/fuzz/device/msc/CMakeLists.txt @@ -24,6 +24,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) diff --git a/test/fuzz/device/net/CMakeLists.txt b/test/fuzz/device/net/CMakeLists.txt index 8e4db9d29..8bff217cb 100644 --- a/test/fuzz/device/net/CMakeLists.txt +++ b/test/fuzz/device/net/CMakeLists.txt @@ -24,6 +24,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) +# Configure compilation flags and libraries for the example without RTOS. +# See the corresponding function in hw/bsp/FAMILY/family.cmake for details. +family_configure_device_example(${PROJECT} noos) -- cgit v1.3.1 From 48738df489ac583ea8a999d15222f1a570f735f7 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 30 Jun 2023 16:05:59 +0700 Subject: move LTO checked to family_support.cmake --- hw/bsp/family_support.cmake | 7 +++++++ hw/bsp/imxrt/family.cmake | 7 ------- hw/bsp/kinetis_kl/family.cmake | 7 ------- hw/bsp/lpc18/family.cmake | 7 ------- hw/bsp/mcx/family.cmake | 7 ------- hw/bsp/nrf/family.cmake | 8 -------- hw/bsp/stm32f0/family.cmake | 7 ------- hw/bsp/stm32f1/family.cmake | 7 ------- hw/bsp/stm32f7/family.cmake | 7 ------- hw/bsp/stm32g0/family.cmake | 7 ------- hw/bsp/stm32g4/family.cmake | 7 ------- hw/bsp/stm32h7/family.cmake | 7 ------- hw/bsp/stm32l4/family.cmake | 7 ------- 13 files changed, 7 insertions(+), 85 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 781c67bf7..b2e61a824 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -36,6 +36,13 @@ if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake) message(FATAL_ERROR "Family '${FAMILY}' is not known/supported") endif() +# enable LTO if supported +include(CheckIPOSupported) +check_ipo_supported(RESULT IPO_SUPPORTED) +if (IPO_SUPPORTED) + set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) +endif () + set(WARNING_FLAGS_GNU -Wall -Wextra diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index aaedfc9d6..a8841f8ce 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -16,13 +16,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 4df3d1ed1..793ef1783 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -16,13 +16,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index da71a0e5d..74a794bde 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -15,13 +15,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index f548ac4f3..b3a4a846e 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -16,13 +16,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 30fd41d7b..2b13249f4 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -23,12 +23,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS NRF5X CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () #------------------------------------ # BOARD_TARGET @@ -124,8 +118,6 @@ function(family_configure_example TARGET RTOS) ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - - # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index 73f43de82..e0fc705f8 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F0 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index efe41bc1b..53af35862 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F1 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 30bde9b0d..48dd9c7ca 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F7 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index f7b665090..b787363ed 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G0 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 3c7633d64..675a96c74 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index 1a8c4354c..c08857a50 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index da017cdde..87f87004b 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32L4 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET -- cgit v1.3.1 From eb298e2b81762ab2ead484dd021179d09e0335c9 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 14 Jul 2023 12:34:43 +0700 Subject: add clock_config.c for imxrt generated by mcuxpresso config --- .idea/runConfigurations/mcx947.xml | 2 +- .idea/runConfigurations/rt1010.xml | 4 +- .../boards/metro_m7_1011/board/clock_config.c | 340 +++++++ .../boards/metro_m7_1011/board/clock_config.h | 97 ++ .../imxrt/boards/metro_m7_1011/metro_m7_1011.mex | 692 ++++++++++++++ .../boards/mimxrt1010_evk/board/clock_config.c | 351 +++++++ .../boards/mimxrt1010_evk/board/clock_config.h | 97 ++ .../imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex | 692 ++++++++++++++ .../boards/mimxrt1015_evk/board/clock_config.c | 357 +++++++ .../boards/mimxrt1015_evk/board/clock_config.h | 100 ++ .../imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex | 576 +++++++++++ hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake | 2 +- hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk | 2 +- .../boards/mimxrt1020_evk/board/clock_config.c | 421 ++++++++ .../boards/mimxrt1020_evk/board/clock_config.h | 108 +++ .../imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex | 597 ++++++++++++ hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake | 2 +- hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk | 2 +- .../boards/mimxrt1024_evk/board/clock_config.c | 421 ++++++++ .../boards/mimxrt1024_evk/board/clock_config.h | 108 +++ .../imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex | 503 ++++++++++ hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk | 2 + .../boards/mimxrt1050_evkb/board/clock_config.c | 495 ++++++++++ .../boards/mimxrt1050_evkb/board/clock_config.h | 119 +++ .../boards/mimxrt1050_evkb/mimxrt1050_evkb.mex | 1001 +++++++++++++++++++ .../boards/mimxrt1060_evk/board/clock_config.c | 509 ++++++++++ .../boards/mimxrt1060_evk/board/clock_config.h | 123 +++ .../imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex | 1001 +++++++++++++++++++ .../boards/mimxrt1064_evk/board/clock_config.c | 511 ++++++++++ .../boards/mimxrt1064_evk/board/clock_config.h | 123 +++ .../imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex | 1006 ++++++++++++++++++++ hw/bsp/imxrt/boards/teensy_40/board/clock_config.c | 509 ++++++++++ hw/bsp/imxrt/boards/teensy_40/board/clock_config.h | 123 +++ hw/bsp/imxrt/boards/teensy_40/teensy40.mex | 1001 +++++++++++++++++++ hw/bsp/imxrt/boards/teensy_41/board/clock_config.c | 509 ++++++++++ hw/bsp/imxrt/boards/teensy_41/board/clock_config.h | 123 +++ hw/bsp/imxrt/boards/teensy_41/teensy41.mex | 1001 +++++++++++++++++++ hw/bsp/imxrt/debug.jlinkscript | 5 + hw/bsp/imxrt/family.c | 9 +- hw/bsp/imxrt/family.cmake | 9 +- hw/bsp/mcx/debug.jlinkscript | 5 + hw/bsp/mcx/mcx.jlinkscript | 5 - 42 files changed, 13643 insertions(+), 20 deletions(-) create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex create mode 100644 hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex create mode 100644 hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex create mode 100644 hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex create mode 100644 hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex create mode 100644 hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex create mode 100644 hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex create mode 100644 hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex create mode 100644 hw/bsp/imxrt/boards/teensy_40/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/teensy_40/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/teensy_40/teensy40.mex create mode 100644 hw/bsp/imxrt/boards/teensy_41/board/clock_config.c create mode 100644 hw/bsp/imxrt/boards/teensy_41/board/clock_config.h create mode 100644 hw/bsp/imxrt/boards/teensy_41/teensy41.mex create mode 100644 hw/bsp/imxrt/debug.jlinkscript create mode 100644 hw/bsp/mcx/debug.jlinkscript delete mode 100644 hw/bsp/mcx/mcx.jlinkscript (limited to 'hw/bsp/mcx') diff --git a/.idea/runConfigurations/mcx947.xml b/.idea/runConfigurations/mcx947.xml index 038c87421..0e7e2befc 100644 --- a/.idea/runConfigurations/mcx947.xml +++ b/.idea/runConfigurations/mcx947.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/rt1010.xml b/.idea/runConfigurations/rt1010.xml index 6fabd8561..a39f1f684 100644 --- a/.idea/runConfigurations/rt1010.xml +++ b/.idea/runConfigurations/rt1010.xml @@ -1,6 +1,6 @@ - - + + diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c new file mode 100644 index 000000000..1b28b668a --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c @@ -0,0 +1,340 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1011xxxxx +package_id: MIMXRT1011DAE5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1010-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: ADC_ALT_CLK.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz} +- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY_CLK.outFreq, value: 480 MHz} +settings: +- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true} +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true} +- {id: CCM.IPG_PODF.scale, value: '4'} +- {id: CCM.LPSPI_PODF.scale, value: '5'} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK} +- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK} +- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM_ANALOG.PLL2.denom, value: '1'} +- {id: CCM_ANALOG.PLL2.num, value: '0'} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = + { + .enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Xbar1); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Init Enet PLL. */ + CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 0); + CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0); +#endif + /* Disable ADC_ACLK_EN clock gate. */ + CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK; + /* Set ADC_ACLK_PODF. */ + CLOCK_SetDiv(kCLOCK_AdcDiv, 11); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18); +#endif + /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */ + /* Set Pll3 SW clock source to use the USB1 PLL output. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Set safe value of the AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 1); + /* Set periph clock2 clock source to use the PLL3_SW_CLK. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 18); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 18); + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h new file mode 100644 index 000000000..119fd94bd --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h @@ -0,0 +1,97 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT 500000000UL +#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY_CLK 480000000UL + +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Enet PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex new file mode 100644 index 000000000..606ec2cfc --- /dev/null +++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex @@ -0,0 +1,692 @@ + + + + MIMXRT1011xxxxx + MIMXRT1011DAE5A + MIMXRT1010-EVK + A + ksdk2_0 + + + + + + + true + false + false + true + false + + + + + + + + + 13.0.2 + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + true + + + + + 2.5.1 + + + + + true + + + + + 2.0.1 + + + + + true + + + + + 2.0.3 + + + + + + + + + 13.0.2 + + + + + + + + + 0 + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c new file mode 100644 index 000000000..6cd18c8c2 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c @@ -0,0 +1,351 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1011xxxxx +package_id: MIMXRT1011DAE5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1010-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + +#include "fsl_iomuxc.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: ADC_ALT_CLK.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz} +- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY_CLK.outFreq, value: 480 MHz} +settings: +- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true} +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true} +- {id: CCM.IPG_PODF.scale, value: '4'} +- {id: CCM.LPSPI_PODF.scale, value: '5'} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK} +- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK} +- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM_ANALOG.PLL2.denom, value: '1'} +- {id: CCM_ANALOG.PLL2.num, value: '0'} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = + { + .enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Xbar1); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Init Enet PLL. */ + CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 0); + CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0); +#endif + /* Disable ADC_ACLK_EN clock gate. */ + CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK; + /* Set ADC_ACLK_PODF. */ + CLOCK_SetDiv(kCLOCK_AdcDiv, 11); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18); +#endif + /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */ + /* Set Pll3 SW clock source to use the USB1 PLL output. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Set safe value of the AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 1); + /* Set periph clock2 clock source to use the PLL3_SW_CLK. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 18); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 18); + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h new file mode 100644 index 000000000..119fd94bd --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h @@ -0,0 +1,97 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT 500000000UL +#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY_CLK 480000000UL + +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Enet PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex new file mode 100644 index 000000000..606ec2cfc --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex @@ -0,0 +1,692 @@ + + + + MIMXRT1011xxxxx + MIMXRT1011DAE5A + MIMXRT1010-EVK + A + ksdk2_0 + + + + + + + true + false + false + true + false + + + + + + + + + 13.0.2 + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + true + + + + + 2.5.1 + + + + + true + + + + + 2.0.1 + + + + + true + + + + + 2.0.3 + + + + + + + + + 13.0.2 + + + + + + + + + 0 + + + + + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c new file mode 100644 index 000000000..ae1aa7fb1 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c @@ -0,0 +1,357 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1015xxxxx +package_id: MIMXRT1015DAF5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1015-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 2160/11 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 352/3 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '1', locked: true} +- {id: CCM.CLKO2_SEL.sel, value: CCM.LPI2C_CLK_ROOT} +- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.IPG_PODF.scale, value: '4'} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF} +- {id: CCM.SEMC_PODF.scale, value: '2'} +- {id: CCM.TRACE_PODF.scale, value: '3', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = + { + .enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 0); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 1); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 3); +#endif + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 2); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 2); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 18); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 18); + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Enet PLL. */ + CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(6); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h new file mode 100644 index 000000000..2acdb16a7 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h @@ -0,0 +1,100 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 500000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 196363636UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 117333333UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL + +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Enet PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex new file mode 100644 index 000000000..431a59af7 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex @@ -0,0 +1,576 @@ + + + + MIMXRT1015xxxxx + MIMXRT1015DAF5A + MIMXRT1015-EVK + B + ksdk2_0 + + + + + + + true + false + false + true + false + + + + + + + + + 13.0.2 + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + N/A + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + N/A + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake index 1696dc987..39c94147c 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake @@ -1,6 +1,6 @@ set(MCU_VARIANT MIMXRT1021) -set(JLINK_DEVICE MIMXRT1021DAG5A) +set(JLINK_DEVICE MIMXRT1021xxx5A) set(PYOCD_TARGET mimxrt1020) set(NXPLINK_DEVICE MIMXRT1021xxxxx:EVK-MIMXRT1020) diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk index b15da1b67..e269c8ac5 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk @@ -2,7 +2,7 @@ CFLAGS += -DCPU_MIMXRT1021DAG5A MCU_VARIANT = MIMXRT1021 # For flash-jlink target -JLINK_DEVICE = MIMXRT1021DAG5A +JLINK_DEVICE = MIMXRT1021xxx5A # For flash-pyocd target PYOCD_TARGET = mimxrt1020 diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c new file mode 100644 index 000000000..764042928 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c @@ -0,0 +1,421 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1021xxxxx +package_id: MIMXRT1021DAG5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1020-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz} +- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 176 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 176 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '1', locked: true} +- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL2_PFD2_CLK} +- {id: CCM.IPG_PODF.scale, value: '4'} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF} +- {id: CCM.SEMC_PODF.scale, value: '8'} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM.TRACE_PODF.scale, value: '4', locked: true} +- {id: CCM.USDHC1_PODF.scale, value: '3', locked: true} +- {id: CCM.USDHC2_PODF.scale, value: '3', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6} +- {id: CCM_ANALOG_PLL_ENET_ENABLE_CFG, value: Disabled} +- {id: CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG, value: Disabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = + { + .enableClkOutput = false, /* Disable the PLL providing the ENET 125MHz reference clock */ + .enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */ + .enableClkOutput25M = false, /* Disable the PLL providing the ENET 25MHz reference clock */ + .loopDivider = 1, /* Set frequency of ethernet reference clock to 50 MHz */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Adc2); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 0); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Disable USDHC1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc1); + /* Set USDHC1_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc1Div, 2); + /* Set Usdhc1 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0); + /* Disable USDHC2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc2); + /* Set USDHC2_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc2Div, 2); + /* Set Usdhc2 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT + /* Disable Semc clock gate. */ + CLOCK_DisableClock(kCLOCK_Semc); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 7); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 2); +#endif + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + CLOCK_DisableClock(kCLOCK_Lpspi3); + CLOCK_DisableClock(kCLOCK_Lpspi4); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + CLOCK_DisableClock(kCLOCK_Lpi2c3); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable CAN clock gate. */ + CLOCK_DisableClock(kCLOCK_Can1); + CLOCK_DisableClock(kCLOCK_Can2); + CLOCK_DisableClock(kCLOCK_Can1S); + CLOCK_DisableClock(kCLOCK_Can2S); + /* Set CAN_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_CanDiv, 1); + /* Set Can clock source. */ + CLOCK_SetMux(kCLOCK_CanMux, 2); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + CLOCK_DisableClock(kCLOCK_Lpuart5); + CLOCK_DisableClock(kCLOCK_Lpuart6); + CLOCK_DisableClock(kCLOCK_Lpuart7); + CLOCK_DisableClock(kCLOCK_Lpuart8); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged." +#endif + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 18); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 18); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Enet PLL. */ + CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(3); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ +#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK; +#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK) + /* Backward compatibility for original bitfield name */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK; +#else +#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined." +#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */ + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h new file mode 100644 index 000000000..d678a4f66 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h @@ -0,0 +1,108 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 500000000UL +#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 176000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 176000000UL + +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Enet PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex new file mode 100644 index 000000000..4ddaaed77 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex @@ -0,0 +1,597 @@ + + + + MIMXRT1021xxxxx + MIMXRT1021DAG5A + MIMXRT1020-EVK + A3 + ksdk2_0 + + + + + + + false + false + false + true + false + + + + + + + + + 13.0.2 + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + + + + 13.0.2 + c_array + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake index 7011fec9b..45487d148 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake @@ -1,6 +1,6 @@ set(MCU_VARIANT MIMXRT1024) -set(JLINK_DEVICE MIMXRT1024DAG5A) +set(JLINK_DEVICE MIMXRT1024xxx5A) set(PYOCD_TARGET mimxrt1024) set(NXPLINK_DEVICE MIMXRT1024xxxxx:MIMXRT1024-EVK) diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk index 92209992d..3c325cc93 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk @@ -5,7 +5,7 @@ MCU_VARIANT = MIMXRT1024 CFLAGS += -Wno-error=array-bounds # For flash-jlink target -JLINK_DEVICE = MIMXRT1024DAG5A +JLINK_DEVICE = MIMXRT1024xxx5A # For flash-pyocd target PYOCD_TARGET = mimxrt1024 diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c new file mode 100644 index 000000000..ba0cadafa --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c @@ -0,0 +1,421 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1024xxxxx +package_id: MIMXRT1024DAG5A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1024-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz} +- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 62.5 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 176 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 176 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '1', locked: true} +- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL2_PFD2_CLK} +- {id: CCM.IPG_PODF.scale, value: '4'} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF} +- {id: CCM.SEMC_PODF.scale, value: '8'} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM.TRACE_PODF.scale, value: '4', locked: true} +- {id: CCM.USDHC1_PODF.scale, value: '3', locked: true} +- {id: CCM.USDHC2_PODF.scale, value: '3', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6} +- {id: CCM_ANALOG_PLL_ENET_ENABLE_CFG, value: Disabled} +- {id: CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG, value: Disabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN = + { + .enableClkOutput = false, /* Disable the PLL providing the ENET 125MHz reference clock */ + .enableClkOutput500M = true, /* Enable the PLL providing the ENET 500MHz reference clock */ + .enableClkOutput25M = false, /* Disable the PLL providing the ENET 25MHz reference clock */ + .loopDivider = 1, /* Set frequency of ethernet reference clock to 50 MHz */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Adc2); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 0); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Disable USDHC1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc1); + /* Set USDHC1_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc1Div, 2); + /* Set Usdhc1 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0); + /* Disable USDHC2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc2); + /* Set USDHC2_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc2Div, 2); + /* Set Usdhc2 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT + /* Disable Semc clock gate. */ + CLOCK_DisableClock(kCLOCK_Semc); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 7); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 2); +#endif + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + CLOCK_DisableClock(kCLOCK_Lpspi3); + CLOCK_DisableClock(kCLOCK_Lpspi4); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + CLOCK_DisableClock(kCLOCK_Lpi2c3); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable CAN clock gate. */ + CLOCK_DisableClock(kCLOCK_Can1); + CLOCK_DisableClock(kCLOCK_Can2); + CLOCK_DisableClock(kCLOCK_Can1S); + CLOCK_DisableClock(kCLOCK_Can2S); + /* Set CAN_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_CanDiv, 1); + /* Set Can clock source. */ + CLOCK_SetMux(kCLOCK_CanMux, 2); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + CLOCK_DisableClock(kCLOCK_Lpuart5); + CLOCK_DisableClock(kCLOCK_Lpuart6); + CLOCK_DisableClock(kCLOCK_Lpuart7); + CLOCK_DisableClock(kCLOCK_Lpuart8); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged." +#endif + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 18); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 18); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Enet PLL. */ + CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(3); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ +#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK; +#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK) + /* Backward compatibility for original bitfield name */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK; +#else +#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined." +#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */ + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h new file mode 100644 index 000000000..d678a4f66 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h @@ -0,0 +1,108 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 500000000U /*!< Core clock frequency: 500000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 500000000UL +#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK 500000000UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 62500000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 125000000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 62500000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 176000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 176000000UL + +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Enet PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex new file mode 100644 index 000000000..2aa55a604 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex @@ -0,0 +1,503 @@ + + + + MIMXRT1024xxxxx + MIMXRT1024DAG5A + MIMXRT1024-EVK + B1 + ksdk2_0 + + + + + + + false + false + false + true + false + + + + + + + + + 13.0.2 + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + + + + 13.0.2 + c_array + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + N/A + + + + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk index 9fd229105..60aa1e28f 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk @@ -1,6 +1,8 @@ CFLAGS += -DCPU_MIMXRT1052DVL6B MCU_VARIANT = MIMXRT1052 +JLINK_DEVICE = MIMXRT1052xxxxB + # For flash-pyocd target PYOCD_TARGET = mimxrt1050 diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c new file mode 100644 index 000000000..9738c6350 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c @@ -0,0 +1,495 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1052xxxxB +package_id: MIMXRT1052DVL6B +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: IMXRT1050-EVKB + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz} +- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz} +- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz} +- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 160 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz} +- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: LVDS1_CLK.outFreq, value: 1.2 GHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz} +- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +- {id: USBPHY2_CLK.outFreq, value: 480 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI_PODF.scale, value: '3', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM.PLL3_SW_CLK_SEL} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.SEMC_PODF.scale, value: '8'} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1} +- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true} +- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL5.denom, value: '1'} +- {id: CCM_ANALOG.PLL5.div, value: '40'} +- {id: CCM_ANALOG.PLL5.num, value: '0'} +- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV} +- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2'} +- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7} +- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4'} +- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 100, /* PLL loop divider, Fout = Fin * 50 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 40, /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .postDivider = 8, /* Divider after PLL */ + .numerator = 0, /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .denominator = 1, /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Adc2); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + CLOCK_DisableClock(kCLOCK_Xbar3); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 1); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Disable USDHC1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc1); + /* Set USDHC1_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1); + /* Set Usdhc1 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0); + /* Disable USDHC2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc2); + /* Set USDHC2_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1); + /* Set Usdhc2 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT + /* Disable Semc clock gate. */ + CLOCK_DisableClock(kCLOCK_Semc); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 7); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 2); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 1); +#endif + /* Disable CSI clock gate. */ + CLOCK_DisableClock(kCLOCK_Csi); + /* Set CSI_PODF. */ + CLOCK_SetDiv(kCLOCK_CsiDiv, 1); + /* Set Csi clock source. */ + CLOCK_SetMux(kCLOCK_CsiMux, 0); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + CLOCK_DisableClock(kCLOCK_Lpspi3); + CLOCK_DisableClock(kCLOCK_Lpspi4); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + CLOCK_DisableClock(kCLOCK_Lpi2c3); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable CAN clock gate. */ + CLOCK_DisableClock(kCLOCK_Can1); + CLOCK_DisableClock(kCLOCK_Can2); + CLOCK_DisableClock(kCLOCK_Can1S); + CLOCK_DisableClock(kCLOCK_Can2S); + /* Set CAN_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_CanDiv, 1); + /* Set Can clock source. */ + CLOCK_SetMux(kCLOCK_CanMux, 2); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + CLOCK_DisableClock(kCLOCK_Lpuart5); + CLOCK_DisableClock(kCLOCK_Lpuart6); + CLOCK_DisableClock(kCLOCK_Lpuart7); + CLOCK_DisableClock(kCLOCK_Lpuart8); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable LCDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_LcdPixel); + /* Set LCDIF_PRED. */ + CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1); + /* Set LCDIF_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_LcdifDiv, 3); + /* Set Lcdif pre clock source. */ + CLOCK_SetMux(kCLOCK_LcdifPreMux, 5); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Disable Flexio2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio2); + /* Set FLEXIO2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1); + /* Set FLEXIO2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio2Div, 7); + /* Set Flexio2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio2Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Init ARM PLL. */ + CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged." +#endif + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 24); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 16); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Video PLL. */ + uint32_t pllVideo; + /* Disable Video PLL output before initial Video PLL. */ + CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK; + /* Bypass PLL first */ + CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) | + CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0); + CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0); + CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1); + pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) | + CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(40); + pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1); + CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3); + CCM_ANALOG->PLL_VIDEO = pllVideo; + while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0) + { + } + /* Disable bypass for Video PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0); + /* DeInit Enet PLL. */ + CLOCK_DeinitEnetPll(); + /* Bypass Enet PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1); + /* Set Enet output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1); + /* Enable Enet output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK; + /* Enable Enet25M output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK; + /* Init Usb2 PLL. */ + CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set lvds1 clock source. */ + CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ +#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK; +#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK) + /* Backward compatibility for original bitfield name */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK; +#else +#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined." +#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */ + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h new file mode 100644 index 000000000..6b4264bf2 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h @@ -0,0 +1,119 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL +#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL +#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 160000000UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL +#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 67500000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL + +/*! @brief Arm PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN; +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Video PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex new file mode 100644 index 000000000..c0a5b5660 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex @@ -0,0 +1,1001 @@ + + + + MIMXRT1052xxxxB + MIMXRT1052DVL6B + IMXRT1050-EVKB + A + ksdk2_0 + + + + + + + false + false + false + true + false + + + + + + + + + 13.0.2 + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + kELCDIF_CurFrameDoneInterruptEnable + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c new file mode 100644 index 000000000..c55e0135a --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c @@ -0,0 +1,509 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1062xxxxA +package_id: MIMXRT1062DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1060-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz} +- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz} +- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz} +- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz} +- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz} +- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: LVDS1_CLK.outFreq, value: 1.2 GHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz} +- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +- {id: USBPHY2_CLK.outFreq, value: 480 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true} +- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.SEMC_PODF.scale, value: '8'} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM.TRACE_PODF.scale, value: '4', locked: true} +- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1} +- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true} +- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL5.denom, value: '1'} +- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true} +- {id: CCM_ANALOG.PLL5.num, value: '0'} +- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV} +- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true} +- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7} +- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true} +- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 100, /* PLL loop divider, Fout = Fin * 50 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 31, /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .postDivider = 8, /* Divider after PLL */ + .numerator = 0, /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .denominator = 1, /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Adc2); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + CLOCK_DisableClock(kCLOCK_Xbar3); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 1); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Disable USDHC1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc1); + /* Set USDHC1_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1); + /* Set Usdhc1 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0); + /* Disable USDHC2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc2); + /* Set USDHC2_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1); + /* Set Usdhc2 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT + /* Disable Semc clock gate. */ + CLOCK_DisableClock(kCLOCK_Semc); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 7); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 3); +#endif + /* Disable Flexspi2 clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi2); + /* Set FLEXSPI2_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1); + /* Set Flexspi2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1); + /* Disable CSI clock gate. */ + CLOCK_DisableClock(kCLOCK_Csi); + /* Set CSI_PODF. */ + CLOCK_SetDiv(kCLOCK_CsiDiv, 1); + /* Set Csi clock source. */ + CLOCK_SetMux(kCLOCK_CsiMux, 0); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + CLOCK_DisableClock(kCLOCK_Lpspi3); + CLOCK_DisableClock(kCLOCK_Lpspi4); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + CLOCK_DisableClock(kCLOCK_Lpi2c3); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable CAN clock gate. */ + CLOCK_DisableClock(kCLOCK_Can1); + CLOCK_DisableClock(kCLOCK_Can2); + CLOCK_DisableClock(kCLOCK_Can3); + CLOCK_DisableClock(kCLOCK_Can1S); + CLOCK_DisableClock(kCLOCK_Can2S); + CLOCK_DisableClock(kCLOCK_Can3S); + /* Set CAN_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_CanDiv, 1); + /* Set Can clock source. */ + CLOCK_SetMux(kCLOCK_CanMux, 2); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + CLOCK_DisableClock(kCLOCK_Lpuart5); + CLOCK_DisableClock(kCLOCK_Lpuart6); + CLOCK_DisableClock(kCLOCK_Lpuart7); + CLOCK_DisableClock(kCLOCK_Lpuart8); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable LCDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_LcdPixel); + /* Set LCDIF_PRED. */ + CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1); + /* Set LCDIF_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_LcdifDiv, 3); + /* Set Lcdif pre clock source. */ + CLOCK_SetMux(kCLOCK_LcdifPreMux, 5); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Disable Flexio2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio2); + /* Set FLEXIO2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1); + /* Set FLEXIO2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio2Div, 7); + /* Set Flexio2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio2Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Init ARM PLL. */ + CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged." +#endif + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 24); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 16); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Video PLL. */ + uint32_t pllVideo; + /* Disable Video PLL output before initial Video PLL. */ + CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK; + /* Bypass PLL first */ + CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) | + CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0); + CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0); + CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1); + pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) | + CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31); + pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1); + CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3); + CCM_ANALOG->PLL_VIDEO = pllVideo; + while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0) + { + } + /* Disable bypass for Video PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0); + /* DeInit Enet PLL. */ + CLOCK_DeinitEnetPll(); + /* Bypass Enet PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1); + /* Set Enet output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1); + /* Enable Enet output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK; + /* Set Enet2 output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0); + /* Enable Enet2 output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK; + /* Enable Enet25M output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK; + /* Init Usb2 PLL. */ + CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set lvds1 clock source. */ + CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK; + /* Set ENET2 Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK; + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h new file mode 100644 index 000000000..7ce24b6f4 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h @@ -0,0 +1,123 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL +#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL +#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL +#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 67500000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL + +/*! @brief Arm PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN; +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Video PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex new file mode 100644 index 000000000..39b3ed606 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex @@ -0,0 +1,1001 @@ + + + + MIMXRT1062xxxxA + MIMXRT1062DVL6A + MIMXRT1060-EVK + A2 + ksdk2_0 + + + + + + + false + false + false + true + false + + + + + + + + + 13.0.2 + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + kELCDIF_CurFrameDoneInterruptEnable + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c new file mode 100644 index 000000000..778ab02f2 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c @@ -0,0 +1,511 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1064xxxxA +package_id: MIMXRT1064DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1064-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz} +- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz} +- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz} +- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz} +- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz} +- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: LVDS1_CLK.outFreq, value: 1.2 GHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz} +- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +- {id: USBPHY2_CLK.outFreq, value: 480 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true} +- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.SEMC_PODF.scale, value: '8'} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM.TRACE_PODF.scale, value: '4', locked: true} +- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1} +- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true} +- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD1_DIV.scale, value: '16', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL5.denom, value: '1'} +- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true} +- {id: CCM_ANALOG.PLL5.num, value: '0'} +- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV} +- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true} +- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7} +- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true} +- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 100, /* PLL loop divider, Fout = Fin * 50 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 31, /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .postDivider = 8, /* Divider after PLL */ + .numerator = 0, /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .denominator = 1, /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Adc2); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + CLOCK_DisableClock(kCLOCK_Xbar3); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 1); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Disable USDHC1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc1); + /* Set USDHC1_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1); + /* Set Usdhc1 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0); + /* Disable USDHC2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc2); + /* Set USDHC2_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1); + /* Set Usdhc2 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT + /* Disable Semc clock gate. */ + CLOCK_DisableClock(kCLOCK_Semc); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 7); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); +#endif + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 3); + /* In SDK projects, external flash (configured by FLEXSPI2) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI2 clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI2, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi2 clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi2); + /* Set FLEXSPI2_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1); + /* Set Flexspi2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1); +#endif + /* Disable CSI clock gate. */ + CLOCK_DisableClock(kCLOCK_Csi); + /* Set CSI_PODF. */ + CLOCK_SetDiv(kCLOCK_CsiDiv, 1); + /* Set Csi clock source. */ + CLOCK_SetMux(kCLOCK_CsiMux, 0); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + CLOCK_DisableClock(kCLOCK_Lpspi3); + CLOCK_DisableClock(kCLOCK_Lpspi4); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + CLOCK_DisableClock(kCLOCK_Lpi2c3); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable CAN clock gate. */ + CLOCK_DisableClock(kCLOCK_Can1); + CLOCK_DisableClock(kCLOCK_Can2); + CLOCK_DisableClock(kCLOCK_Can3); + CLOCK_DisableClock(kCLOCK_Can1S); + CLOCK_DisableClock(kCLOCK_Can2S); + CLOCK_DisableClock(kCLOCK_Can3S); + /* Set CAN_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_CanDiv, 1); + /* Set Can clock source. */ + CLOCK_SetMux(kCLOCK_CanMux, 2); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + CLOCK_DisableClock(kCLOCK_Lpuart5); + CLOCK_DisableClock(kCLOCK_Lpuart6); + CLOCK_DisableClock(kCLOCK_Lpuart7); + CLOCK_DisableClock(kCLOCK_Lpuart8); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable LCDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_LcdPixel); + /* Set LCDIF_PRED. */ + CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1); + /* Set LCDIF_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_LcdifDiv, 3); + /* Set Lcdif pre clock source. */ + CLOCK_SetMux(kCLOCK_LcdifPreMux, 5); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Disable Flexio2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio2); + /* Set FLEXIO2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1); + /* Set FLEXIO2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio2Div, 7); + /* Set Flexio2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio2Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Init ARM PLL. */ + CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged." +#endif + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 24); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 16); +#endif + /* In SDK projects, external flash (configured by FLEXSPI2) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI2 clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI2, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Video PLL. */ + uint32_t pllVideo; + /* Disable Video PLL output before initial Video PLL. */ + CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK; + /* Bypass PLL first */ + CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) | + CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0); + CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0); + CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1); + pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) | + CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31); + pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1); + CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3); + CCM_ANALOG->PLL_VIDEO = pllVideo; + while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0) + { + } + /* Disable bypass for Video PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0); + /* DeInit Enet PLL. */ + CLOCK_DeinitEnetPll(); + /* Bypass Enet PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1); + /* Set Enet output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1); + /* Enable Enet output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK; + /* Set Enet2 output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0); + /* Enable Enet2 output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK; + /* Enable Enet25M output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK; + /* Init Usb2 PLL. */ + CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set lvds1 clock source. */ + CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK; + /* Set ENET2 Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK; + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h new file mode 100644 index 000000000..7ce24b6f4 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h @@ -0,0 +1,123 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL +#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL +#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL +#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 67500000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL + +/*! @brief Arm PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN; +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Video PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex new file mode 100644 index 000000000..5e0fc72d3 --- /dev/null +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex @@ -0,0 +1,1006 @@ + + + + MIMXRT1064xxxxA + MIMXRT1064DVL6A + MIMXRT1064-EVK + 1 + ksdk2_0 + + + + + + + true + false + false + true + false + + + + + + + + + 13.0.2 + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + kCSI_HsyncActiveHigh + kCSI_VsyncActiveLow + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + kELCDIF_CurFrameDoneInterruptEnable + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + diff --git a/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c new file mode 100644 index 000000000..c55e0135a --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c @@ -0,0 +1,509 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1062xxxxA +package_id: MIMXRT1062DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1060-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz} +- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz} +- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz} +- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz} +- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz} +- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: LVDS1_CLK.outFreq, value: 1.2 GHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz} +- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +- {id: USBPHY2_CLK.outFreq, value: 480 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true} +- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.SEMC_PODF.scale, value: '8'} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM.TRACE_PODF.scale, value: '4', locked: true} +- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1} +- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true} +- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL5.denom, value: '1'} +- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true} +- {id: CCM_ANALOG.PLL5.num, value: '0'} +- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV} +- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true} +- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7} +- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true} +- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 100, /* PLL loop divider, Fout = Fin * 50 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 31, /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .postDivider = 8, /* Divider after PLL */ + .numerator = 0, /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .denominator = 1, /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Adc2); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + CLOCK_DisableClock(kCLOCK_Xbar3); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 1); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Disable USDHC1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc1); + /* Set USDHC1_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1); + /* Set Usdhc1 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0); + /* Disable USDHC2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc2); + /* Set USDHC2_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1); + /* Set Usdhc2 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT + /* Disable Semc clock gate. */ + CLOCK_DisableClock(kCLOCK_Semc); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 7); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 3); +#endif + /* Disable Flexspi2 clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi2); + /* Set FLEXSPI2_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1); + /* Set Flexspi2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1); + /* Disable CSI clock gate. */ + CLOCK_DisableClock(kCLOCK_Csi); + /* Set CSI_PODF. */ + CLOCK_SetDiv(kCLOCK_CsiDiv, 1); + /* Set Csi clock source. */ + CLOCK_SetMux(kCLOCK_CsiMux, 0); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + CLOCK_DisableClock(kCLOCK_Lpspi3); + CLOCK_DisableClock(kCLOCK_Lpspi4); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + CLOCK_DisableClock(kCLOCK_Lpi2c3); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable CAN clock gate. */ + CLOCK_DisableClock(kCLOCK_Can1); + CLOCK_DisableClock(kCLOCK_Can2); + CLOCK_DisableClock(kCLOCK_Can3); + CLOCK_DisableClock(kCLOCK_Can1S); + CLOCK_DisableClock(kCLOCK_Can2S); + CLOCK_DisableClock(kCLOCK_Can3S); + /* Set CAN_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_CanDiv, 1); + /* Set Can clock source. */ + CLOCK_SetMux(kCLOCK_CanMux, 2); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + CLOCK_DisableClock(kCLOCK_Lpuart5); + CLOCK_DisableClock(kCLOCK_Lpuart6); + CLOCK_DisableClock(kCLOCK_Lpuart7); + CLOCK_DisableClock(kCLOCK_Lpuart8); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable LCDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_LcdPixel); + /* Set LCDIF_PRED. */ + CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1); + /* Set LCDIF_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_LcdifDiv, 3); + /* Set Lcdif pre clock source. */ + CLOCK_SetMux(kCLOCK_LcdifPreMux, 5); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Disable Flexio2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio2); + /* Set FLEXIO2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1); + /* Set FLEXIO2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio2Div, 7); + /* Set Flexio2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio2Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Init ARM PLL. */ + CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged." +#endif + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 24); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 16); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Video PLL. */ + uint32_t pllVideo; + /* Disable Video PLL output before initial Video PLL. */ + CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK; + /* Bypass PLL first */ + CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) | + CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0); + CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0); + CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1); + pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) | + CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31); + pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1); + CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3); + CCM_ANALOG->PLL_VIDEO = pllVideo; + while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0) + { + } + /* Disable bypass for Video PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0); + /* DeInit Enet PLL. */ + CLOCK_DeinitEnetPll(); + /* Bypass Enet PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1); + /* Set Enet output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1); + /* Enable Enet output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK; + /* Set Enet2 output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0); + /* Enable Enet2 output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK; + /* Enable Enet25M output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK; + /* Init Usb2 PLL. */ + CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set lvds1 clock source. */ + CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK; + /* Set ENET2 Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK; + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h new file mode 100644 index 000000000..7ce24b6f4 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h @@ -0,0 +1,123 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL +#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL +#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL +#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 67500000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL + +/*! @brief Arm PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN; +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Video PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40.mex b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex new file mode 100644 index 000000000..39b3ed606 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex @@ -0,0 +1,1001 @@ + + + + MIMXRT1062xxxxA + MIMXRT1062DVL6A + MIMXRT1060-EVK + A2 + ksdk2_0 + + + + + + + false + false + false + true + false + + + + + + + + + 13.0.2 + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + kELCDIF_CurFrameDoneInterruptEnable + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + diff --git a/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c new file mode 100644 index 000000000..c55e0135a --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c @@ -0,0 +1,509 @@ +/* + * How to setup clock using clock driver functions: + * + * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock. + * + * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock. + * + * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out. + * + * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out. + * + * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings. + * + */ + +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v11.0 +processor: MIMXRT1062xxxxA +package_id: MIMXRT1062DVL6A +mcu_data: ksdk2_0 +processor_version: 13.0.2 +board: MIMXRT1060-EVK + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +#include "clock_config.h" +#include "fsl_iomuxc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockRUN(); +} + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockRUN +called_from_default_init: true +outputs: +- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz} +- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz} +- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz} +- {id: CLK_1M.outFreq, value: 1 MHz} +- {id: CLK_24M.outFreq, value: 24 MHz} +- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz} +- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz} +- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz} +- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz} +- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz} +- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz} +- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz} +- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz} +- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz} +- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz} +- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz} +- {id: LVDS1_CLK.outFreq, value: 1.2 GHz} +- {id: MQS_MCLK.outFreq, value: 1080/17 MHz} +- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz} +- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz} +- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz} +- {id: SAI1_MCLK3.outFreq, value: 30 MHz} +- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI2_MCLK3.outFreq, value: 30 MHz} +- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz} +- {id: SAI3_MCLK3.outFreq, value: 30 MHz} +- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz} +- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz} +- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz} +- {id: UART_CLK_ROOT.outFreq, value: 80 MHz} +- {id: USBPHY1_CLK.outFreq, value: 480 MHz} +- {id: USBPHY2_CLK.outFreq, value: 480 MHz} +- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz} +- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz} +settings: +- {id: CCM.AHB_PODF.scale, value: '1', locked: true} +- {id: CCM.ARM_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true} +- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK} +- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true} +- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true} +- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true} +- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true} +- {id: CCM.SEMC_PODF.scale, value: '8'} +- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK} +- {id: CCM.TRACE_PODF.scale, value: '4', locked: true} +- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1} +- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true} +- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true} +- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true} +- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true} +- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK} +- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0} +- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1} +- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2} +- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3} +- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3} +- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0} +- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true} +- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true} +- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1} +- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2} +- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3} +- {id: CCM_ANALOG.PLL4.denom, value: '50'} +- {id: CCM_ANALOG.PLL4.div, value: '47'} +- {id: CCM_ANALOG.PLL5.denom, value: '1'} +- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true} +- {id: CCM_ANALOG.PLL5.num, value: '0'} +- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV} +- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true} +- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7} +- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true} +- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled} +- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'} +- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'} +sources: +- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 100, /* PLL loop divider, Fout = Fin * 50 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 1, /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */ + .numerator = 0, /* 30 bit numerator of fractional loop divider */ + .denominator = 1, /* 30 bit denominator of fractional loop divider */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN = + { + .loopDivider = 0, /* PLL loop divider, Fout = Fin * 20 */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN = + { + .loopDivider = 31, /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .postDivider = 8, /* Divider after PLL */ + .numerator = 0, /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .denominator = 1, /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */ + .src = 0, /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */ + }; +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Init RTC OSC clock frequency. */ + CLOCK_SetRtcXtalFreq(32768U); + /* Enable 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK; + /* Use free 1MHz clock output. */ + XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK; + /* Set XTAL 24MHz clock frequency. */ + CLOCK_SetXtalFreq(24000000U); + /* Enable XTAL 24MHz clock source. */ + CLOCK_InitExternalClk(0); + /* Enable internal RC. */ + CLOCK_InitRcOsc24M(); + /* Switch clock source to external OSC. */ + CLOCK_SwitchOsc(kCLOCK_XtalOsc); + /* Set Oscillator ready counter value. */ + CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127); + /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */ + CLOCK_SetMux(kCLOCK_PeriphMux, 1); /* Set PERIPH_CLK MUX to PERIPH_CLK2 */ + /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */ + DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13); + /* Waiting for DCDC_STS_DC_OK bit is asserted */ + while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0)) + { + } + /* Set AHB_PODF. */ + CLOCK_SetDiv(kCLOCK_AhbDiv, 0); + /* Disable IPG clock gate. */ + CLOCK_DisableClock(kCLOCK_Adc1); + CLOCK_DisableClock(kCLOCK_Adc2); + CLOCK_DisableClock(kCLOCK_Xbar1); + CLOCK_DisableClock(kCLOCK_Xbar2); + CLOCK_DisableClock(kCLOCK_Xbar3); + /* Set IPG_PODF. */ + CLOCK_SetDiv(kCLOCK_IpgDiv, 3); + /* Set ARM_PODF. */ + CLOCK_SetDiv(kCLOCK_ArmDiv, 1); + /* Set PERIPH_CLK2_PODF. */ + CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0); + /* Disable PERCLK clock gate. */ + CLOCK_DisableClock(kCLOCK_Gpt1); + CLOCK_DisableClock(kCLOCK_Gpt1S); + CLOCK_DisableClock(kCLOCK_Gpt2); + CLOCK_DisableClock(kCLOCK_Gpt2S); + CLOCK_DisableClock(kCLOCK_Pit); + /* Set PERCLK_PODF. */ + CLOCK_SetDiv(kCLOCK_PerclkDiv, 1); + /* Disable USDHC1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc1); + /* Set USDHC1_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1); + /* Set Usdhc1 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0); + /* Disable USDHC2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Usdhc2); + /* Set USDHC2_PODF. */ + CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1); + /* Set Usdhc2 clock source. */ + CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT + /* Disable Semc clock gate. */ + CLOCK_DisableClock(kCLOCK_Semc); + /* Set SEMC_PODF. */ + CLOCK_SetDiv(kCLOCK_SemcDiv, 7); + /* Set Semc alt clock source. */ + CLOCK_SetMux(kCLOCK_SemcAltMux, 0); + /* Set Semc clock source. */ + CLOCK_SetMux(kCLOCK_SemcMux, 0); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Disable Flexspi clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi); + /* Set FLEXSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1); + /* Set Flexspi clock source. */ + CLOCK_SetMux(kCLOCK_FlexspiMux, 3); +#endif + /* Disable Flexspi2 clock gate. */ + CLOCK_DisableClock(kCLOCK_FlexSpi2); + /* Set FLEXSPI2_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1); + /* Set Flexspi2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1); + /* Disable CSI clock gate. */ + CLOCK_DisableClock(kCLOCK_Csi); + /* Set CSI_PODF. */ + CLOCK_SetDiv(kCLOCK_CsiDiv, 1); + /* Set Csi clock source. */ + CLOCK_SetMux(kCLOCK_CsiMux, 0); + /* Disable LPSPI clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpspi1); + CLOCK_DisableClock(kCLOCK_Lpspi2); + CLOCK_DisableClock(kCLOCK_Lpspi3); + CLOCK_DisableClock(kCLOCK_Lpspi4); + /* Set LPSPI_PODF. */ + CLOCK_SetDiv(kCLOCK_LpspiDiv, 4); + /* Set Lpspi clock source. */ + CLOCK_SetMux(kCLOCK_LpspiMux, 2); + /* Disable TRACE clock gate. */ + CLOCK_DisableClock(kCLOCK_Trace); + /* Set TRACE_PODF. */ + CLOCK_SetDiv(kCLOCK_TraceDiv, 3); + /* Set Trace clock source. */ + CLOCK_SetMux(kCLOCK_TraceMux, 0); + /* Disable SAI1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai1); + /* Set SAI1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3); + /* Set SAI1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai1Div, 1); + /* Set Sai1 clock source. */ + CLOCK_SetMux(kCLOCK_Sai1Mux, 0); + /* Disable SAI2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai2); + /* Set SAI2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3); + /* Set SAI2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai2Div, 1); + /* Set Sai2 clock source. */ + CLOCK_SetMux(kCLOCK_Sai2Mux, 0); + /* Disable SAI3 clock gate. */ + CLOCK_DisableClock(kCLOCK_Sai3); + /* Set SAI3_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3); + /* Set SAI3_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Sai3Div, 1); + /* Set Sai3 clock source. */ + CLOCK_SetMux(kCLOCK_Sai3Mux, 0); + /* Disable Lpi2c clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpi2c1); + CLOCK_DisableClock(kCLOCK_Lpi2c2); + CLOCK_DisableClock(kCLOCK_Lpi2c3); + /* Set LPI2C_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0); + /* Set Lpi2c clock source. */ + CLOCK_SetMux(kCLOCK_Lpi2cMux, 0); + /* Disable CAN clock gate. */ + CLOCK_DisableClock(kCLOCK_Can1); + CLOCK_DisableClock(kCLOCK_Can2); + CLOCK_DisableClock(kCLOCK_Can3); + CLOCK_DisableClock(kCLOCK_Can1S); + CLOCK_DisableClock(kCLOCK_Can2S); + CLOCK_DisableClock(kCLOCK_Can3S); + /* Set CAN_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_CanDiv, 1); + /* Set Can clock source. */ + CLOCK_SetMux(kCLOCK_CanMux, 2); + /* Disable UART clock gate. */ + CLOCK_DisableClock(kCLOCK_Lpuart1); + CLOCK_DisableClock(kCLOCK_Lpuart2); + CLOCK_DisableClock(kCLOCK_Lpuart3); + CLOCK_DisableClock(kCLOCK_Lpuart4); + CLOCK_DisableClock(kCLOCK_Lpuart5); + CLOCK_DisableClock(kCLOCK_Lpuart6); + CLOCK_DisableClock(kCLOCK_Lpuart7); + CLOCK_DisableClock(kCLOCK_Lpuart8); + /* Set UART_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_UartDiv, 0); + /* Set Uart clock source. */ + CLOCK_SetMux(kCLOCK_UartMux, 0); + /* Disable LCDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_LcdPixel); + /* Set LCDIF_PRED. */ + CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1); + /* Set LCDIF_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_LcdifDiv, 3); + /* Set Lcdif pre clock source. */ + CLOCK_SetMux(kCLOCK_LcdifPreMux, 5); + /* Disable SPDIF clock gate. */ + CLOCK_DisableClock(kCLOCK_Spdif); + /* Set SPDIF0_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1); + /* Set SPDIF0_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Spdif0Div, 7); + /* Set Spdif clock source. */ + CLOCK_SetMux(kCLOCK_SpdifMux, 3); + /* Disable Flexio1 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio1); + /* Set FLEXIO1_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1); + /* Set FLEXIO1_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio1Div, 7); + /* Set Flexio1 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio1Mux, 3); + /* Disable Flexio2 clock gate. */ + CLOCK_DisableClock(kCLOCK_Flexio2); + /* Set FLEXIO2_CLK_PRED. */ + CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1); + /* Set FLEXIO2_CLK_PODF. */ + CLOCK_SetDiv(kCLOCK_Flexio2Div, 7); + /* Set Flexio2 clock source. */ + CLOCK_SetMux(kCLOCK_Flexio2Mux, 3); + /* Set Pll3 sw clock source. */ + CLOCK_SetMux(kCLOCK_Pll3SwMux, 0); + /* Init ARM PLL. */ + CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN); + /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd. + * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged. + * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/ +#ifndef SKIP_SYSCLK_INIT +#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1) + #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged." +#endif + /* Init System PLL. */ + CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN); + /* Init System pfd0. */ + CLOCK_InitSysPfd(kCLOCK_Pfd0, 27); + /* Init System pfd1. */ + CLOCK_InitSysPfd(kCLOCK_Pfd1, 16); + /* Init System pfd2. */ + CLOCK_InitSysPfd(kCLOCK_Pfd2, 24); + /* Init System pfd3. */ + CLOCK_InitSysPfd(kCLOCK_Pfd3, 16); +#endif + /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd. + * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged. + * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/ +#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1)) + /* Init Usb1 PLL. */ + CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN); + /* Init Usb1 pfd0. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33); + /* Init Usb1 pfd1. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16); + /* Init Usb1 pfd2. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17); + /* Init Usb1 pfd3. */ + CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19); +#endif + /* DeInit Audio PLL. */ + CLOCK_DeinitAudioPll(); + /* Bypass Audio PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1); + /* Set divider for Audio PLL. */ + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; + CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK; + /* Enable Audio PLL output. */ + CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK; + /* Init Video PLL. */ + uint32_t pllVideo; + /* Disable Video PLL output before initial Video PLL. */ + CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK; + /* Bypass PLL first */ + CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) | + CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0); + CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0); + CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1); + pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) | + CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31); + pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1); + CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3); + CCM_ANALOG->PLL_VIDEO = pllVideo; + while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0) + { + } + /* Disable bypass for Video PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0); + /* DeInit Enet PLL. */ + CLOCK_DeinitEnetPll(); + /* Bypass Enet PLL. */ + CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1); + /* Set Enet output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1); + /* Enable Enet output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK; + /* Set Enet2 output divider. */ + CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0); + /* Enable Enet2 output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK; + /* Enable Enet25M output. */ + CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK; + /* Init Usb2 PLL. */ + CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN); + /* Set preperiph clock source. */ + CLOCK_SetMux(kCLOCK_PrePeriphMux, 3); + /* Set periph clock source. */ + CLOCK_SetMux(kCLOCK_PeriphMux, 0); + /* Set periph clock2 clock source. */ + CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0); + /* Set per clock source. */ + CLOCK_SetMux(kCLOCK_PerclkMux, 0); + /* Set lvds1 clock source. */ + CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0); + /* Set clock out1 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0); + /* Set clock out1 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1); + /* Set clock out2 divider. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0); + /* Set clock out2 source. */ + CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18); + /* Set clock out1 drives clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK; + /* Disable clock out1. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK; + /* Disable clock out2. */ + CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK; + /* Set SAI1 MCLK1 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0); + /* Set SAI1 MCLK2 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0); + /* Set SAI1 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0); + /* Set SAI2 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0); + /* Set SAI3 MCLK3 clock source. */ + IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0); + /* Set MQS configuration. */ + IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0); + /* Set ENET Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK; + /* Set ENET2 Ref clock source. */ + IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK; + /* Set GPT1 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK; + /* Set GPT2 High frequency reference clock source. */ + IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK; + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h new file mode 100644 index 000000000..7ce24b6f4 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h @@ -0,0 +1,123 @@ +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */ + +#define BOARD_XTAL32K_CLK_HZ 32768U /*!< Board xtal32k frequency in Hz */ +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ********************** Configuration BOARD_BootClockRUN *********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockRUN configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 600000000U /*!< Core clock frequency: 600000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT 600000000UL +#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT 40000000UL +#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT 32768UL +#define BOARD_BOOTCLOCKRUN_CLKO1_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLKO2_CLK 0UL +#define BOARD_BOOTCLOCKRUN_CLK_1M 1000000UL +#define BOARD_BOOTCLOCKRUN_CLK_24M 24000000UL +#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT 12000000UL +#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK 2400000UL +#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK 1200000UL +#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK 0UL +#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK 0UL +#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT 130909090UL +#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ 75000000UL +#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT 150000000UL +#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT 67500000UL +#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT 60000000UL +#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT 105600000UL +#define BOARD_BOOTCLOCKRUN_LVDS1_CLK 1200000000UL +#define BOARD_BOOTCLOCKRUN_MQS_MCLK 63529411UL +#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1 63529411UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2 0UL +#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3 30000000UL +#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT 75000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT 30000000UL +#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT 0UL +#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT 132000000UL +#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT 80000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK 480000000UL +#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT 198000000UL +#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT 198000000UL + +/*! @brief Arm PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN; +/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN; +/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN; +/*! @brief Sys PLL for BOARD_BootClockRUN configuration. + */ +extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN; +/*! @brief Video PLL set for BOARD_BootClockRUN configuration. + */ +extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN; + +/******************************************************************************* + * API for BOARD_BootClockRUN configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockRUN(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41.mex b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex new file mode 100644 index 000000000..39b3ed606 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex @@ -0,0 +1,1001 @@ + + + + MIMXRT1062xxxxA + MIMXRT1062DVL6A + MIMXRT1060-EVK + A2 + ksdk2_0 + + + + + + + false + false + false + true + false + + + + + + + + + 13.0.2 + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + + + Configures pin routing and optionally pin electrical features. + + true + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + 13.0.2 + + + + + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + INPUT + + + + + true + + + + + OUTPUT + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + 0.0.0 + + + + + + + + + + 13.0.2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + kELCDIF_CurFrameDoneInterruptEnable + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 0.0.0 + + + + diff --git a/hw/bsp/imxrt/debug.jlinkscript b/hw/bsp/imxrt/debug.jlinkscript new file mode 100644 index 000000000..fd8bcffef --- /dev/null +++ b/hw/bsp/imxrt/debug.jlinkscript @@ -0,0 +1,5 @@ +int SetupTarget(void) { + JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x40000"); + + return 0; +} diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 735fbdb9b..9aa55bc94 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -234,21 +234,18 @@ int board_uart_read(uint8_t* buf, int len) return count; } -int board_uart_write(void const * buf, int len) -{ +int board_uart_write(void const * buf, int len) { LPUART_WriteBlocking(UART_PORT, (uint8_t const*)buf, len); return len; } #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ +void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) -{ +uint32_t board_millis(void) { return system_ticks; } #endif diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index a8841f8ce..f1c5b0ab1 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -24,12 +24,14 @@ set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "") function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) add_library(${BOARD_TARGET} STATIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/clock_config.c + #${SDK_DIR}/drivers/adc_12b1msps_sar/fsl_adc.c ${SDK_DIR}/drivers/common/fsl_common.c ${SDK_DIR}/drivers/igpio/fsl_gpio.c + ${SDK_DIR}/drivers/lpspi/fsl_lpspi.c ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c - ${SDK_DIR}/devices/${MCU_VARIANT}/project_template/clock_config.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c ) target_compile_definitions(${BOARD_TARGET} PUBLIC @@ -39,12 +41,15 @@ function(add_board_target BOARD_TARGET) XIP_BOOT_HEADER_ENABLE=1 ) target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board ${CMSIS_DIR}/CMSIS/Core/Include ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/project_template ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + #${SDK_DIR}/drivers/adc_12b1msps_sar ${SDK_DIR}/drivers/common ${SDK_DIR}/drivers/igpio + ${SDK_DIR}/drivers/lpspi ${SDK_DIR}/drivers/lpuart ) diff --git a/hw/bsp/mcx/debug.jlinkscript b/hw/bsp/mcx/debug.jlinkscript new file mode 100644 index 000000000..fd8bcffef --- /dev/null +++ b/hw/bsp/mcx/debug.jlinkscript @@ -0,0 +1,5 @@ +int SetupTarget(void) { + JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x40000"); + + return 0; +} diff --git a/hw/bsp/mcx/mcx.jlinkscript b/hw/bsp/mcx/mcx.jlinkscript deleted file mode 100644 index fd8bcffef..000000000 --- a/hw/bsp/mcx/mcx.jlinkscript +++ /dev/null @@ -1,5 +0,0 @@ -int SetupTarget(void) { - JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x40000"); - - return 0; -} -- cgit v1.3.1 From 473f37df958f74153f15c050c20d63f8defe89ed Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 12:05:21 +0700 Subject: add osal queue name if needed also mass change configQUEUE_REGISTRY_SIZE = 4 --- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- src/osal/osal_freertos.h | 108 ++++++++++----------- 18 files changed, 68 insertions(+), 74 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 9bef9bbbf..69d638288 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,7 +81,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 9bef9bbbf..69d638288 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,7 +81,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index f95927069..b65d8f1f9 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h index a46af1759..2a2bce261 100644 --- a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h index 1b3c64e0b..ea568dfc9 100644 --- a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 3 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h index 96611ca1c..a48b54576 100644 --- a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h index b1cef793e..fc0ab1f2d 100644 --- a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index b1cef793e..fc0ab1f2d 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h index a56f243ea..efd26a3a7 100644 --- a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h index 8c39a2fb8..4ef5dd883 100644 --- a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,7 +81,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h index fc2f9fc67..33440d288 100644 --- a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h index 5a6b2300b..580fe02bb 100644 --- a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h index 815e567dd..4615640ed 100644 --- a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h index c8736f6d1..02bfaf97a 100644 --- a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h index 95fcbb08a..17c2a0c5c 100644 --- a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h index 6881385a8..6a1f6c043 100644 --- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h index e6a735ddd..c12b0dc85 100644 --- a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 0b1b11589..501e0bddd 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -52,53 +52,60 @@ extern "C" { typedef SemaphoreHandle_t osal_semaphore_t; typedef SemaphoreHandle_t osal_mutex_t; - -// _int_set is not used with an RTOS -#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ - static _type _name##_##buf[_depth];\ - osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf }; +typedef QueueHandle_t osal_queue_t; typedef struct { uint16_t depth; uint16_t item_sz; void* buf; + +#if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) + char const* name; +#endif + #if configSUPPORT_STATIC_ALLOCATION StaticQueue_t sq; #endif -}osal_queue_def_t; +} osal_queue_def_t; -typedef QueueHandle_t osal_queue_t; +#if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) + #define _OSAL_Q_NAME(_name) .name = #_name +#else + #define _OSAL_Q_NAME(_name) +#endif + +// _int_set is not used with an RTOS +#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ + static _type _name##_##buf[_depth];\ + osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, _OSAL_Q_NAME(_name) }; //--------------------------------------------------------------------+ // TASK API //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) -{ - if (msec == OSAL_TIMEOUT_WAIT_FOREVER) return portMAX_DELAY; - if (msec == 0) return 0; +TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) { + if ( msec == OSAL_TIMEOUT_WAIT_FOREVER ) return portMAX_DELAY; + if ( msec == 0 ) return 0; uint32_t ticks = pdMS_TO_TICKS(msec); // configTICK_RATE_HZ is less than 1000 and 1 tick > 1 ms // we still need to delay at least 1 tick - if (ticks == 0) ticks =1 ; + if ( ticks == 0 ) ticks = 1; return ticks; } -TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) -{ - vTaskDelay( pdMS_TO_TICKS(msec) ); +TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { + vTaskDelay(pdMS_TO_TICKS(msec)); } //--------------------------------------------------------------------+ // Semaphore API //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { #if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateBinaryStatic(semdef); #else @@ -107,14 +114,10 @@ TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_ #endif } -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) -{ - if ( !in_isr ) - { +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { + if ( !in_isr ) { return xSemaphoreGive(sem_hdl) != 0; - } - else - { + } else { BaseType_t xHigherPriorityTaskWoken = pdFALSE; BaseType_t res = xSemaphoreGiveFromISR(sem_hdl, &xHigherPriorityTaskWoken); @@ -129,13 +132,11 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t se } } -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { return xSemaphoreTake(sem_hdl, _osal_ms2tick(msec)); } -TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t const sem_hdl) -{ +TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t const sem_hdl) { xQueueReset(sem_hdl); } @@ -143,8 +144,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t c // MUTEX API (priority inheritance) //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t *mdef) { #if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateMutexStatic(mdef); #else @@ -153,13 +153,11 @@ TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_de #endif } -TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock(osal_mutex_t mutex_hdl, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock(osal_mutex_t mutex_hdl, uint32_t msec) { return osal_semaphore_wait(mutex_hdl, msec); } -TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) { return xSemaphoreGive(mutex_hdl); } @@ -167,38 +165,35 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd // QUEUE API //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { osal_queue_t q; - #if configSUPPORT_STATIC_ALLOCATION - q = xQueueCreateStatic(qdef->depth, qdef->item_sz, (uint8_t*) qdef->buf, &qdef->sq); - #else - q = xQueueCreate(qdef->depth, qdef->item_sz); - #endif - #if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) - vQueueAddToRegistry(q, "tinyUSB"); - #endif + +#if configSUPPORT_STATIC_ALLOCATION + q = xQueueCreateStatic(qdef->depth, qdef->item_sz, (uint8_t*) qdef->buf, &qdef->sq); +#else + q = xQueueCreate(qdef->depth, qdef->item_sz); +#endif + +#if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) + vQueueAddToRegistry(q, qdef->name); +#endif + return q; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) { return xQueueReceive(qhdl, data, _osal_ms2tick(msec)); } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const * data, bool in_isr) -{ - if ( !in_isr ) - { +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const *data, bool in_isr) { + if ( !in_isr ) { return xQueueSendToBack(qhdl, data, OSAL_TIMEOUT_WAIT_FOREVER) != 0; - } - else - { + } else { BaseType_t xHigherPriorityTaskWoken = pdFALSE; BaseType_t res = xQueueSendToBackFromISR(qhdl, data, &xHigherPriorityTaskWoken); #if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - // not needed after https://github.com/espressif/esp-idf/commit/c5fd79547ac9b7bae06fa660e9f814d18d3390b7 + // not needed after https://github.com/espressif/esp-idf/commit/c5fd79547ac9b7bae06fa660e9f814d18d3390b7 (IDF v5) if ( xHigherPriorityTaskWoken ) portYIELD_FROM_ISR(); #else portYIELD_FROM_ISR(xHigherPriorityTaskWoken); @@ -208,13 +203,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void } } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) { return uxQueueMessagesWaiting(qhdl) == 0; } #ifdef __cplusplus - } +} #endif #endif -- cgit v1.3.1 From a5768f52b492f7a2ee32f3b786c12532d0876f01 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 15:50:52 +0700 Subject: more board_api.h rename --- hw/bsp/board_api.h | 58 ++++++++++------------ hw/bsp/broadcom_32bit/family.c | 2 +- hw/bsp/broadcom_64bit/family.c | 2 +- hw/bsp/brtmm90x/family.c | 2 +- hw/bsp/ch32v307/family.c | 2 +- hw/bsp/da14695_dk_usb/da14695_dk_usb.c | 2 +- hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c | 2 +- hw/bsp/espressif/boards/family.c | 2 +- hw/bsp/f1c100s/f1c100s.c | 2 +- hw/bsp/imxrt/family.c | 2 +- .../boards/frdm_k32l2a4s/frdm_k32l2a4s.c | 2 +- .../kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c | 2 +- hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c | 2 +- hw/bsp/kinetis_kl/family.c | 2 +- .../lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c | 2 +- .../lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c | 2 +- hw/bsp/lpc15/family.c | 2 +- hw/bsp/lpc18/family.c | 2 +- hw/bsp/lpc40/family.c | 2 +- hw/bsp/lpc54/family.c | 2 +- hw/bsp/lpc55/family.c | 2 +- hw/bsp/mcx/family.c | 2 +- hw/bsp/msp430/family.c | 2 +- hw/bsp/msp432e4/family.c | 2 +- hw/bsp/nrf/family.c | 2 +- hw/bsp/nutiny_nuc121s/nutiny_nuc121.c | 2 +- hw/bsp/nutiny_nuc125s/nutiny_nuc125.c | 2 +- hw/bsp/nutiny_nuc126v/nutiny_nuc126.c | 2 +- hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c | 2 +- hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c | 2 +- hw/bsp/ra/family.c | 2 +- hw/bsp/rx/boards/gr_citrus/gr_citrus.c | 2 +- hw/bsp/rx/boards/rx65n_target/rx65n_target.c | 2 +- hw/bsp/samd11/family.c | 2 +- hw/bsp/samd21/family.c | 2 +- hw/bsp/samd51/family.c | 2 +- hw/bsp/same5x/boards/d5035_01/d5035_01.c | 2 +- .../boards/same54_xplained/same54_xplained.c | 2 +- hw/bsp/same70_qmtech/same70_qmtech.c | 2 +- hw/bsp/same70_xplained/same70_xplained.c | 2 +- hw/bsp/samg55xplained/samg55xplained.c | 2 +- hw/bsp/saml2x/family.c | 2 +- hw/bsp/spresense/board_spresense.c | 2 +- hw/bsp/stm32f0/family.c | 2 +- hw/bsp/stm32f1/family.c | 2 +- .../boards/stm32f207nucleo/stm32f207nucleo.c | 2 +- hw/bsp/stm32f4/family.c | 2 +- hw/bsp/stm32f7/family.c | 2 +- hw/bsp/stm32g0/family.c | 2 +- hw/bsp/stm32g4/family.c | 2 +- hw/bsp/stm32h7/family.c | 2 +- hw/bsp/stm32l0/family.c | 2 +- hw/bsp/stm32u5/family.c | 2 +- hw/bsp/stm32wb/family.c | 2 +- hw/bsp/tm4c123/family.c | 2 +- hw/bsp/xmc4000/family.c | 2 +- 56 files changed, 80 insertions(+), 88 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 32b10d06b..a7f3826d1 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -24,11 +24,11 @@ * This file is part of the TinyUSB stack. */ -#ifndef _BSP_BOARD_H_ -#define _BSP_BOARD_H_ +#ifndef _BOARD_API_H_ +#define _BOARD_API_H_ #ifdef __cplusplus - extern "C" { +extern "C" { #endif #include @@ -62,40 +62,36 @@ uint32_t board_button_read(void); // Get characters from UART // Return number of read bytes -int board_uart_read(uint8_t* buf, int len); +int board_uart_read(uint8_t *buf, int len); // Send characters to UART // Return number of sent bytes -int board_uart_write(void const * buf, int len); +int board_uart_write(void const *buf, int len); #if CFG_TUSB_OS == OPT_OS_NONE - // Get current milliseconds, must be implemented when no RTOS is used - uint32_t board_millis(void); +// Get current milliseconds, must be implemented when no RTOS is used +uint32_t board_millis(void); #elif CFG_TUSB_OS == OPT_OS_FREERTOS - static inline uint32_t board_millis(void) - { - return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); - } +static inline uint32_t board_millis(void) { + return ( ( ((uint64_t) xTaskGetTickCount()) * 1000) / configTICK_RATE_HZ ); +} #elif CFG_TUSB_OS == OPT_OS_MYNEWT - static inline uint32_t board_millis(void) - { - return os_time_ticks_to_ms32( os_time_get() ); - } +static inline uint32_t board_millis(void) { + return os_time_ticks_to_ms32( os_time_get() ); +} #elif CFG_TUSB_OS == OPT_OS_PICO - #include "pico/time.h" - static inline uint32_t board_millis(void) - { - return to_ms_since_boot(get_absolute_time()); - } +#include "pico/time.h" +static inline uint32_t board_millis(void) { + return to_ms_since_boot(get_absolute_time()); +} #elif CFG_TUSB_OS == OPT_OS_RTTHREAD - static inline uint32_t board_millis(void) - { - return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); - } +static inline uint32_t board_millis(void) { + return (((uint64_t)rt_tick_get()) * 1000 / RT_TICK_PER_SECOND); +} #else #error "board_millis() is not implemented for this OS" @@ -104,22 +100,18 @@ int board_uart_write(void const * buf, int len); //--------------------------------------------------------------------+ // Helper functions //--------------------------------------------------------------------+ -static inline void board_led_on(void) -{ +static inline void board_led_on(void) { board_led_write(true); } -static inline void board_led_off(void) -{ +static inline void board_led_off(void) { board_led_write(false); } // TODO remove -static inline void board_delay(uint32_t ms) -{ +static inline void board_delay(uint32_t ms) { uint32_t start_ms = board_millis(); - while (board_millis() - start_ms < ms) - { + while ( board_millis() - start_ms < ms ) { #if CFG_TUD_ENABLED // take chance to run usb background tud_task(); @@ -131,7 +123,7 @@ static inline void board_delay(uint32_t ms) int board_getchar(void); #ifdef __cplusplus - } +} #endif #endif diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index 42ad4b666..664b4dcaf 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "broadcom/cpu.h" diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index 42ad4b666..664b4dcaf 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "broadcom/cpu.h" diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index f812c922f..4d81e7d52 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index d5602c7b4..245fa5674 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -28,7 +28,7 @@ #include "debug_uart.h" #include "ch32v30x.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c index 3abb488f2..667b83de3 100644 --- a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c +++ b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include #include diff --git a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c index abe7f54cb..21bd62714 100644 --- a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c +++ b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include #include diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 8fc4a1cc8..8f857fb71 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "esp_rom_gpio.h" diff --git a/hw/bsp/f1c100s/f1c100s.c b/hw/bsp/f1c100s/f1c100s.c index 5dcae33f7..272b756f2 100644 --- a/hw/bsp/f1c100s/f1c100s.c +++ b/hw/bsp/f1c100s/f1c100s.c @@ -28,7 +28,7 @@ #include #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" extern void sys_uart_putc(char c); diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index bfab1d496..ec95a8b24 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/frdm_k32l2a4s.c b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/frdm_k32l2a4s.c index 80830163b..39783b7e1 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/frdm_k32l2a4s.c +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/frdm_k32l2a4s.c @@ -25,7 +25,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "fsl_gpio.h" #include "fsl_port.h" diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c index 1566b4e2e..3f99b0cbd 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c @@ -25,7 +25,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "fsl_gpio.h" #include "fsl_port.h" diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c b/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c index f9002a6d3..b83d5c820 100644 --- a/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c @@ -25,7 +25,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "fsl_smc.h" #include "fsl_gpio.h" diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c index 8914078d5..3e9aa83a4 100644 --- a/hw/bsp/kinetis_kl/family.c +++ b/hw/bsp/kinetis_kl/family.c @@ -23,7 +23,7 @@ * THE SOFTWARE. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" #include "fsl_gpio.h" diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c b/hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c index 02dc2cbf9..900c57936 100644 --- a/hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c +++ b/hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "bsp/board.h" +#include "bsp/board_api.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c b/hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c index 44d091511..df895804d 100644 --- a/hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c +++ b/hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "bsp/board.h" +#include "bsp/board_api.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c index 30a3e51e1..cd5c9ab15 100644 --- a/hw/bsp/lpc15/family.c +++ b/hw/bsp/lpc15/family.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 2fd69c84b..b11f4fe0e 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #ifdef BOARD_TUD_RHPORT diff --git a/hw/bsp/lpc40/family.c b/hw/bsp/lpc40/family.c index 829df4ac7..526e3a080 100644 --- a/hw/bsp/lpc40/family.c +++ b/hw/bsp/lpc40/family.c @@ -25,7 +25,7 @@ */ #include "chip.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index fe9cfcc47..108a7d783 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -30,7 +30,7 @@ #include "fsl_iocon.h" #include "fsl_usart.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #ifdef BOARD_TUD_RHPORT diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 1d2c87b4f..0fd85988a 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" #include "fsl_gpio.h" diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index 4344ffc4e..8672ca63f 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "fsl_device_registers.h" #include "fsl_gpio.h" #include "fsl_lpuart.h" diff --git a/hw/bsp/msp430/family.c b/hw/bsp/msp430/family.c index 4b8ae393d..5bb3d3866 100644 --- a/hw/bsp/msp430/family.c +++ b/hw/bsp/msp430/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "msp430.h" diff --git a/hw/bsp/msp432e4/family.c b/hw/bsp/msp432e4/family.c index 3d2d4085e..10f3ac736 100644 --- a/hw/bsp/msp432e4/family.c +++ b/hw/bsp/msp432e4/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "msp.h" diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 6a559ada6..9ca666e36 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c index ec66f8deb..7cb9b2e69 100644 --- a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c +++ b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "NuMicro.h" #include "clk.h" #include "sys.h" diff --git a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c index ec66f8deb..7cb9b2e69 100644 --- a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c +++ b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "NuMicro.h" #include "clk.h" #include "sys.h" diff --git a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c index 90fa2ffd8..9974127a8 100644 --- a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c +++ b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "NuMicro.h" #include "clk.h" #include "sys.h" diff --git a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c index 9e7eacb23..18a189d8c 100644 --- a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c +++ b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "NUC100Series.h" #include "clk.h" #include "sys.h" diff --git a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c index 1fc97e3dc..3ec0066a3 100644 --- a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c +++ b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "NUC505Series.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 00b87f335..6a4e14e86 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -45,7 +45,7 @@ #include "r_ioport_api.h" #include "renesas.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" /* Key code for writing PRCR register. */ diff --git a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c index 4f87153ac..5078c7569 100644 --- a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c +++ b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c @@ -52,7 +52,7 @@ * regarding downloading. */ -#include "../board.h" +#include "bsp/board_api.h" #include "iodefine.h" #include "interrupt_handlers.h" diff --git a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c index 691038fc8..513eca678 100644 --- a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c +++ b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c @@ -50,7 +50,7 @@ * regarding downloading. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "iodefine.h" #include "interrupt_handlers.h" diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c index 8d9633971..4a7331508 100644 --- a/hw/bsp/samd11/family.c +++ b/hw/bsp/samd11/family.c @@ -25,7 +25,7 @@ */ #include "sam.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "hal/include/hal_gpio.h" diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index 308fb51b5..46297f97f 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -25,7 +25,7 @@ */ #include "sam.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "hal/include/hal_gpio.h" diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 3da89ee14..7ec208b30 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -25,7 +25,7 @@ */ #include "sam.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "hal/include/hal_gpio.h" diff --git a/hw/bsp/same5x/boards/d5035_01/d5035_01.c b/hw/bsp/same5x/boards/d5035_01/d5035_01.c index f356851f7..eb5768d0d 100644 --- a/hw/bsp/same5x/boards/d5035_01/d5035_01.c +++ b/hw/bsp/same5x/boards/d5035_01/d5035_01.c @@ -24,7 +24,7 @@ */ #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include diff --git a/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c b/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c index ba1eec38b..93adea63e 100644 --- a/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c +++ b/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c @@ -24,7 +24,7 @@ */ #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include diff --git a/hw/bsp/same70_qmtech/same70_qmtech.c b/hw/bsp/same70_qmtech/same70_qmtech.c index 6e6ad0602..e5f0da198 100644 --- a/hw/bsp/same70_qmtech/same70_qmtech.c +++ b/hw/bsp/same70_qmtech/same70_qmtech.c @@ -24,7 +24,7 @@ */ #include "sam.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "peripheral_clk_config.h" #include "hpl/usart/hpl_usart_base.h" diff --git a/hw/bsp/same70_xplained/same70_xplained.c b/hw/bsp/same70_xplained/same70_xplained.c index e6e7db0f3..f532c6927 100644 --- a/hw/bsp/same70_xplained/same70_xplained.c +++ b/hw/bsp/same70_xplained/same70_xplained.c @@ -24,7 +24,7 @@ */ #include "sam.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "peripheral_clk_config.h" #include "hpl/usart/hpl_usart_base.h" diff --git a/hw/bsp/samg55xplained/samg55xplained.c b/hw/bsp/samg55xplained/samg55xplained.c index 6e1ed56a9..2ac0c0a29 100644 --- a/hw/bsp/samg55xplained/samg55xplained.c +++ b/hw/bsp/samg55xplained/samg55xplained.c @@ -24,7 +24,7 @@ */ #include "sam.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "peripheral_clk_config.h" #include "hal/include/hal_init.h" diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c index f119d23a1..438fe8bfa 100644 --- a/hw/bsp/saml2x/family.c +++ b/hw/bsp/saml2x/family.c @@ -25,7 +25,7 @@ */ #include "sam.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" #include "hal/include/hal_gpio.h" diff --git a/hw/bsp/spresense/board_spresense.c b/hw/bsp/spresense/board_spresense.c index 5f778ad70..8cd04a49d 100644 --- a/hw/bsp/spresense/board_spresense.c +++ b/hw/bsp/spresense/board_spresense.c @@ -29,7 +29,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" /*------------------------------------------------------------------*/ /* MACRO TYPEDEF CONSTANT ENUM diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index bfa843494..fe5de84c6 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -25,7 +25,7 @@ */ #include "stm32f0xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index 5e112de70..49c94a890 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -25,7 +25,7 @@ */ #include "stm32f1xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c index 020f21cb1..dfbe7b743 100644 --- a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c @@ -24,7 +24,7 @@ * This file is part of the TinyUSB stack. */ -#include "bsp/board.h" +#include "bsp/board_api.h" #include "stm32f2xx_hal.h" diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index a308bae05..41803e0ce 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -25,7 +25,7 @@ */ #include "stm32f4xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index ce7e9d1bc..0e9471f33 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -27,7 +27,7 @@ */ #include "stm32f7xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32g0/family.c b/hw/bsp/stm32g0/family.c index 1a975915f..e001425ed 100644 --- a/hw/bsp/stm32g0/family.c +++ b/hw/bsp/stm32g0/family.c @@ -26,7 +26,7 @@ */ #include "stm32g0xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index d77183357..a088a0062 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -27,7 +27,7 @@ #include "stm32g4xx_hal.h" #include "stm32g4xx_ll_bus.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index eb4ac841e..535d586ee 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -28,7 +28,7 @@ */ #include "stm32h7xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index 89749fb50..212415744 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -25,7 +25,7 @@ */ #include "stm32l0xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index ee8a5d7ff..a30d886aa 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -26,7 +26,7 @@ */ #include "stm32u5xx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index e9ca59866..d483c95b7 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -25,7 +25,7 @@ */ #include "stm32wbxx_hal.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c index 3f4f43220..ad5ae505f 100644 --- a/hw/bsp/tm4c123/family.c +++ b/hw/bsp/tm4c123/family.c @@ -1,5 +1,5 @@ #include "TM4C123.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/xmc4000/family.c b/hw/bsp/xmc4000/family.c index 146bef373..832b25a4c 100644 --- a/hw/bsp/xmc4000/family.c +++ b/hw/bsp/xmc4000/family.c @@ -28,7 +28,7 @@ #include "xmc_scu.h" #include "xmc_uart.h" -#include "bsp/board.h" +#include "bsp/board_api.h" #include "board.h" -- cgit v1.3.1 From fbf64b122d6d77a7aa1ec501ff29b8bddeec0a70 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Nov 2023 22:12:38 +0700 Subject: switch freertos to static allocation only (dynamic = 0), since it is possible now with latest freertos cmake --- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h | 4 ++-- 21 files changed, 42 insertions(+), 42 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index 2bc5491bb..0248f0b47 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h index 2a2bce261..e7bd4705a 100644 --- a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h index 6f80413c0..b8b8268f7 100644 --- a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h index a48b54576..eb0da971f 100644 --- a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h index 6f80413c0..b8b8268f7 100644 --- a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h index fc0ab1f2d..e70debfc0 100644 --- a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h index fc0ab1f2d..e70debfc0 100644 --- a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index fc0ab1f2d..e70debfc0 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h index efd26a3a7..00f832b84 100644 --- a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h index 4ef5dd883..cf643d6e5 100644 --- a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -88,8 +88,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h index 02e868741..d83c79601 100644 --- a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h index 32db4ad95..923627b70 100644 --- a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h index 33440d288..fa7092537 100644 --- a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h index 580fe02bb..2bc6b926b 100644 --- a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h index ed90261d0..dfe5fb6cf 100644 --- a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h index 4615640ed..3ad0e794e 100644 --- a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h index 02bfaf97a..e15740e65 100644 --- a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h index 17c2a0c5c..d38801732 100644 --- a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h index 60aa739e2..bf7a80043 100644 --- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h index c12b0dc85..9b2af0a22 100644 --- a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 diff --git a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h index 138fc6ba6..1223274dc 100644 --- a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h @@ -73,8 +73,8 @@ #define configENABLE_BACKWARD_COMPATIBILITY 1 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 -#define configSUPPORT_STATIC_ALLOCATION 0 -#define configSUPPORT_DYNAMIC_ALLOCATION 1 +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 /* Hook function related definitions. */ #define configUSE_IDLE_HOOK 0 -- cgit v1.3.1 From 82880eecbd51ce8cf801ae0c04871e65f81826f4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 12:43:13 +0700 Subject: make nanolib linking explicitly by each family/board --- examples/build_system/make/cpu/cortex-m23.mk | 14 + .../build_system/make/toolchain/arm_gcc_rules.mk | 4 - hw/bsp/ch32v307/family.mk | 2 + hw/bsp/da14695_dk_usb/board.mk | 4 +- hw/bsp/da1469x_dk_pro/board.mk | 4 +- hw/bsp/f1c100s/board.mk | 6 +- hw/bsp/fomu/family.mk | 6 +- hw/bsp/imxrt/family.mk | 4 +- hw/bsp/kinetis_k32l2/family.mk | 2 + hw/bsp/kinetis_kl/family.mk | 1 + hw/bsp/lpc11/family.mk | 2 + hw/bsp/lpc13/family.mk | 2 + hw/bsp/lpc15/family.mk | 2 + hw/bsp/lpc17/family.mk | 2 +- hw/bsp/lpc18/family.mk | 3 +- hw/bsp/lpc40/family.mk | 2 + hw/bsp/lpc43/family.mk | 2 + hw/bsp/lpc51/family.mk | 2 + hw/bsp/lpc54/family.mk | 3 +- hw/bsp/lpc55/family.mk | 3 +- hw/bsp/mcx/family.mk | 2 + hw/bsp/mm32/family.mk | 2 + hw/bsp/msp432e4/family.mk | 2 + hw/bsp/ngx4330/board.mk | 47 --- hw/bsp/ngx4330/ngx4330.c | 271 ---------------- hw/bsp/ngx4330/ngx4330.ld | 343 --------------------- hw/bsp/nrf/family.mk | 13 +- hw/bsp/nutiny_nuc121s/board.mk | 2 + hw/bsp/nutiny_nuc125s/board.mk | 2 + hw/bsp/nutiny_nuc126v/board.mk | 2 + hw/bsp/nutiny_sdk_nuc120/board.mk | 2 + hw/bsp/nutiny_sdk_nuc505/board.mk | 2 + hw/bsp/ra/family.mk | 2 + hw/bsp/rx/family.mk | 2 + hw/bsp/samd11/family.mk | 2 + hw/bsp/samd21/family.mk | 2 + hw/bsp/samd51/family.mk | 2 + hw/bsp/same5x/family.mk | 2 + hw/bsp/same70_qmtech/board.mk | 3 +- hw/bsp/same70_xplained/board.mk | 3 +- hw/bsp/samg55xplained/board.mk | 3 +- hw/bsp/saml2x/family.mk | 2 + hw/bsp/sltb009a/board.mk | 2 + hw/bsp/spresense/board.mk | 2 + hw/bsp/stm32f0/family.mk | 2 + hw/bsp/stm32f1/family.mk | 2 + hw/bsp/stm32f2/family.mk | 2 + hw/bsp/stm32f3/family.mk | 2 + hw/bsp/stm32f4/family.mk | 2 + hw/bsp/stm32f7/family.mk | 2 + hw/bsp/stm32g0/family.mk | 2 + hw/bsp/stm32g4/family.mk | 2 + hw/bsp/stm32h7/family.mk | 2 + hw/bsp/stm32l0/family.mk | 2 + hw/bsp/stm32l4/family.mk | 2 + hw/bsp/stm32u5/family.mk | 2 + hw/bsp/stm32wb/family.mk | 2 + hw/bsp/tm4c123/family.mk | 3 +- 58 files changed, 131 insertions(+), 685 deletions(-) create mode 100644 examples/build_system/make/cpu/cortex-m23.mk delete mode 100644 hw/bsp/ngx4330/board.mk delete mode 100644 hw/bsp/ngx4330/ngx4330.c delete mode 100644 hw/bsp/ngx4330/ngx4330.ld (limited to 'hw/bsp/mcx') diff --git a/examples/build_system/make/cpu/cortex-m23.mk b/examples/build_system/make/cpu/cortex-m23.mk new file mode 100644 index 000000000..29542d8e8 --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m23.mk @@ -0,0 +1,14 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m23 \ + -mfloat-abi=soft \ + +else ifeq ($(TOOLCHAIN),iar) + # IAR Flags + CFLAGS += --cpu cortex-m23 + ASFLAGS += --cpu cortex-m23 +endif + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM23 diff --git a/examples/build_system/make/toolchain/arm_gcc_rules.mk b/examples/build_system/make/toolchain/arm_gcc_rules.mk index b76d4aec3..d295879d9 100644 --- a/examples/build_system/make/toolchain/arm_gcc_rules.mk +++ b/examples/build_system/make/toolchain/arm_gcc_rules.mk @@ -31,10 +31,6 @@ ifdef LD_FILE_GCC LDFLAGS += -Wl,-T,$(TOP)/$(LD_FILE_GCC) endif -ifneq ($(SKIP_NANOLIB), 1) -LDFLAGS += --specs=nosys.specs --specs=nano.specs -endif - ASFLAGS += $(CFLAGS) LIBS_GCC ?= -lgcc -lm -lnosys diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 4b06cf429..fa64c1d7e 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -28,6 +28,8 @@ CFLAGS += \ -Xlinker --gc-sections \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/wch/ch32v307/dcd_usbhs.c \ $(CH32V307_SDK_SRC)/Core/core_riscv.c \ diff --git a/hw/bsp/da14695_dk_usb/board.mk b/hw/bsp/da14695_dk_usb/board.mk index 1f7bc1588..980b1a361 100644 --- a/hw/bsp/da14695_dk_usb/board.mk +++ b/hw/bsp/da14695_dk_usb/board.mk @@ -1,3 +1,5 @@ +MCU_FAMILY_DIR = hw/mcu/dialog/da1469x + CFLAGS += \ -flto \ -mthumb \ @@ -11,7 +13,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ -DCFG_TUD_ENDPOINT0_SIZE=8\ -MCU_FAMILY_DIR = hw/mcu/dialog/da1469x +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/da1469x.ld diff --git a/hw/bsp/da1469x_dk_pro/board.mk b/hw/bsp/da1469x_dk_pro/board.mk index f9bf480de..5282f93a3 100644 --- a/hw/bsp/da1469x_dk_pro/board.mk +++ b/hw/bsp/da1469x_dk_pro/board.mk @@ -1,3 +1,5 @@ +MCU_FAMILY_DIR = hw/mcu/dialog/da1469x + CFLAGS += \ -flto \ -mthumb \ @@ -11,7 +13,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_DA1469X \ -DCFG_TUD_ENDPOINT0_SIZE=8\ -MCU_FAMILY_DIR = hw/mcu/dialog/da1469x +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/da1469x.ld diff --git a/hw/bsp/f1c100s/board.mk b/hw/bsp/f1c100s/board.mk index 9062483b0..3596e5414 100644 --- a/hw/bsp/f1c100s/board.mk +++ b/hw/bsp/f1c100s/board.mk @@ -1,5 +1,5 @@ +MCU_DIR = hw/mcu/allwinner/f1c100s DEPS_SUBMODULES += hw/mcu/allwinner - DEFINES += -D__ARM32_ARCH__=5 -D__ARM926EJS__ CFLAGS += \ @@ -18,8 +18,8 @@ CFLAGS += \ $(DEFINES) LD_FILE = hw/mcu/allwinner/f1c100s/f1c100s.ld -LDFLAGS += -nostdlib -lgcc -MCU_DIR = hw/mcu/allwinner/f1c100s +# TODO may skip nanolib +LDFLAGS += -nostdlib -lgcc -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/sunxi/dcd_sunxi_musb.c \ diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index d0b819120..f8a3c9ebf 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,3 +1,6 @@ +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack +CROSS_COMPILE = riscv-none-embed- + CFLAGS += \ -flto \ -march=rv32i \ @@ -5,8 +8,7 @@ CFLAGS += \ -nostdlib \ -DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE = riscv-none-embed- +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(FAMILY_PATH)/fomu.ld diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index 90d566cfb..c6adcba5a 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -5,8 +5,8 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m7 - MCU_VARIANT_WITH_CORE = ${MCU_VARIANT}${MCU_CORE} +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) CFLAGS += \ -D__ARMVFP__=0 \ @@ -26,7 +26,7 @@ endif # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough -Wno-error=redundant-decls -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx${MCU_CORE}_flexspi_nor.ld diff --git a/hw/bsp/kinetis_k32l2/family.mk b/hw/bsp/kinetis_k32l2/family.mk index 357485762..0bfd57d29 100644 --- a/hw/bsp/kinetis_k32l2/family.mk +++ b/hw/bsp/kinetis_k32l2/family.mk @@ -9,6 +9,8 @@ CPU_CORE ?= cortex-m0plus CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_KINETIS_K32L +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/nxp/khci/dcd_khci.c \ src/portable/nxp/khci/hcd_khci.c \ diff --git a/hw/bsp/kinetis_kl/family.mk b/hw/bsp/kinetis_kl/family.mk index edb2f3366..e331d82b7 100644 --- a/hw/bsp/kinetis_kl/family.mk +++ b/hw/bsp/kinetis_kl/family.mk @@ -9,6 +9,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_KINETIS_KL \ LDFLAGS += \ + -specs=nosys.specs -specs=nano.specs \ -Wl,--defsym,__stack_size__=0x400 \ -Wl,--defsym,__heap_size__=0 diff --git a/hw/bsp/lpc11/family.mk b/hw/bsp/lpc11/family.mk index dee85da90..ce07ff450 100644 --- a/hw/bsp/lpc11/family.mk +++ b/hw/bsp/lpc11/family.mk @@ -11,6 +11,8 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ $(MCU_DIR)/../gcc/cr_startup_lpc$(MCU_DRV).c \ diff --git a/hw/bsp/lpc13/family.mk b/hw/bsp/lpc13/family.mk index 10cf4969d..6964dc48a 100644 --- a/hw/bsp/lpc13/family.mk +++ b/hw/bsp/lpc13/family.mk @@ -14,6 +14,8 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC13XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # startup.c and lpc_types.h cause following errors CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk index 9f489832f..28ab1db7b 100644 --- a/hw/bsp/lpc15/family.mk +++ b/hw/bsp/lpc15/family.mk @@ -12,6 +12,8 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC15XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -Wno-error=cast-qual diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index 44b406d90..67d5e14b5 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -18,7 +18,7 @@ CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual # caused by freeRTOS port !! CFLAGS += -Wno-error=maybe-uninitialized -MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index 9d0f85c20..c36c903ae 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen +MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m3 @@ -13,7 +14,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes -Wno-error=cast-qual -MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/chipidea/ci_hs/dcd_ci_hs.c \ diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index c11325890..fa76789e3 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -15,6 +15,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ diff --git a/hw/bsp/lpc43/family.mk b/hw/bsp/lpc43/family.mk index 55d86e955..f24385139 100644 --- a/hw/bsp/lpc43/family.mk +++ b/hw/bsp/lpc43/family.mk @@ -18,6 +18,8 @@ CFLAGS += \ -Wno-error=cast-qual \ -Wno-error=incompatible-pointer-types \ +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/chipidea/ci_hs/dcd_ci_hs.c \ src/portable/chipidea/ci_hs/hcd_ci_hs.c \ diff --git a/hw/bsp/lpc51/family.mk b/hw/bsp/lpc51/family.mk index df5a9958e..c8ee29dbc 100644 --- a/hw/bsp/lpc51/family.mk +++ b/hw/bsp/lpc51/family.mk @@ -13,6 +13,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = $(MCU_DIR)/gcc/$(MCU)_flash.ld diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index 46a5f7930..9b5eac18d 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -3,6 +3,7 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) CFLAGS += \ -flto \ @@ -22,7 +23,7 @@ endif # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \ diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index a87fa5acf..1b97c43e4 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -4,6 +4,7 @@ DEPS_SUBMODULES += lib/CMSIS_5 lib/sct_neopixel $(SDK_DIR) include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m33 +MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) # Default to Highspeed PORT1 PORT ?= 1 @@ -27,7 +28,7 @@ endif # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal -MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_CORE)_flash.ld diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index e384aa8eb..526effdfb 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -17,6 +17,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld diff --git a/hw/bsp/mm32/family.mk b/hw/bsp/mm32/family.mk index d5b6e315a..3981e4e41 100644 --- a/hw/bsp/mm32/family.mk +++ b/hw/bsp/mm32/family.mk @@ -13,6 +13,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized -Wno-error=cast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c \ $(SDK_DIR)/mm32f327x/MM32F327x/Source/system_mm32f327x.c \ diff --git a/hw/bsp/msp432e4/family.mk b/hw/bsp/msp432e4/family.mk index b5ade6a52..6fcb22457 100644 --- a/hw/bsp/msp432e4/family.mk +++ b/hw/bsp/msp432e4/family.mk @@ -12,6 +12,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=cast-qual -Wno-error=format= +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/mcu/ti/msp432e4/Source/msp432e401y.ld LDINC += $(TOP)/hw/mcu/ti/msp432e4/Include diff --git a/hw/bsp/ngx4330/board.mk b/hw/bsp/ngx4330/board.mk deleted file mode 100644 index 99c1f194c..000000000 --- a/hw/bsp/ngx4330/board.mk +++ /dev/null @@ -1,47 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib \ - -DCORE_M4 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC43XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/ngx4330.ld - -SRC_C += \ - src/portable/chipidea/ci_hs/dcd_ci_hs.c \ - src/portable/chipidea/ci_hs/hcd_ci_hs.c \ - src/portable/ehci/ehci.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c \ - $(MCU_DIR)/src/fpu_init.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_43xx - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = LPC4330 -JLINK_IF = swd - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c deleted file mode 100644 index bd84e449b..000000000 --- a/hw/bsp/ngx4330/ngx4330.c +++ /dev/null @@ -1,271 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board_api.h" - -#define LED_PORT 1 -#define LED_PIN 12 -#define LED_STATE_ON 0 - -#define BUTTON_PORT 0 -#define BUTTON_PIN 7 -#define BUTTON_STATE_ACTIVE 0 - -#define BOARD_UART_PORT LPC_USART0 -#define BOARD_UART_PIN_PORT 0x0f -#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD -#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD - -#ifdef BOARD_TUD_RHPORT - #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) -#else - #define PORT_SUPPORT_DEVICE(_n) 0 -#endif - -#ifdef BOARD_TUH_RHPORT - #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) -#else - #define PORT_SUPPORT_HOST(_n) 0 -#endif - -/*------------------------------------------------------------------*/ -/* BOARD API - *------------------------------------------------------------------*/ - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -static const PINMUX_GRP_T pinmuxing[] = -{ - // LED P2.12 as GPIO 1.12 - {2, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_PULLDOWN | SCU_MODE_FUNC0)}, - - // Button P2.7 as GPIO 0.7 - {2, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)}, - - // USB - {2, 6, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB1_PWR_EN - {2, 5, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, // USB1_VBUS - {1, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB0_PWRN_EN - - // SPIFI - {3, 3, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI CLK */ - {3, 4, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D3 */ - {3, 5, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D2 */ - {3, 6, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D1 */ - {3, 7, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D0 */ - {3, 8, (SCU_PINIO_FAST | SCU_MODE_FUNC3)} /* SPIFI CS/SSEL */ -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - // Set up pinmux - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - //------------- Set up clock -------------// - Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IRC, true, false); // change SPIFI to IRC during clock programming - LPC_SPIFI->CTRL |= SPIFI_CTRL_FBCLK(1); // and set FBCLK in SPIFI controller - - Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true); - - /* Reset and enable 32Khz oscillator */ - LPC_CREG->CREG0 &= ~((1 << 3) | (1 << 2)); - LPC_CREG->CREG0 |= (1 << 1) | (1 << 0); - - /* Setup a divider E for main PLL clock switch SPIFI clock to that divider. - Divide rate is based on CPU speed and speed of SPI FLASH part. */ -#if (MAX_CLOCK_FREQ > 180000000) - Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 5); -#else - Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 4); -#endif - Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IDIVE, true, false); - - /* Setup system base clocks and initial states. This won't enable and - disable individual clocks, but sets up the base clock sources for - each individual peripheral clock. */ - Chip_Clock_SetBaseClock(CLK_BASE_USB1, CLKIN_IDIVD, true, true); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - -#if 0 - //------------- UART -------------// - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1); - scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1); - - UART_CFG_Type UARTConfigStruct; - UART_ConfigStructInit(&UARTConfigStruct); - UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE; - UARTConfigStruct.Clock_Speed = 0; - - UART_Init(BOARD_UART_PORT, &UARTConfigStruct); - UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit -#endif - - //------------- USB -------------// - enum { - USBMODE_DEVICE = 2, - USBMODE_HOST = 3 - }; - - enum { - USBMODE_VBUS_LOW = 0, - USBMODE_VBUS_HIGH = 1 - }; - - /* USB0 - * For USB Device operation; insert jumpers in position 1-2 in JP17/JP18/JP19. GPIO28 controls USB - * connect functionality and LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted - * by default. LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS - * sensing. - * For USB Host operation; insert jumpers in position 2-3 in JP17/JP18/JP19. USB Host power is - * controlled via distribution switch U20 (found in schematic page 11). Signal GPIO26 is active low and - * enables +5V on VBUS2. LED35 light whenever +5V is present on VBUS2. GPIO55 is connected to - * status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down - * resistors are always active - */ - Chip_USB0_Init(); - - /* USB1 - * When USB channel #1 is used as USB Host, 15Kohm pull-down resistors are needed on the USB data - * signals. These are activated inside the USB OTG chip (U31), and this has to be done via the I2C - * interface of GPIO52/GPIO53. - * J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB - * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default - * since SJ5 is normally connected between pin 1-2. LED34 lights green when +5V is available on J20. - * JP15 shall not be inserted. JP16 has no effect - * - * When USB channel #1 is used as USB Device, a 1.5Kohm pull-up resistor is needed on the USB DP - * data signal. There are two methods to create this. JP15 is inserted and the pull-up resistor is always - * enabled. Alternatively, the pull-up resistor is activated inside the USB OTG chip (U31), and this has to - * be done via the I2C interface of GPIO52/GPIO53. In the latter case, JP15 shall not be inserted. - * J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for - * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status - * of VBUS can be read via U31. - * JP16 shall not be inserted. - */ - Chip_USB1_Init(); -// Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6); /* GPIO5[6] = USB1_PWR_EN */ -// Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true); /* GPIO5[6] output high */ -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(0) - tud_int_handler(0); - #endif - - #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0, true); - #endif -} - -void USB1_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(1) - tud_int_handler(1); - #endif - - #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1, true); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING); - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/ngx4330/ngx4330.ld b/hw/bsp/ngx4330/ngx4330.ld deleted file mode 100644 index 300869c20..000000000 --- a/hw/bsp/ngx4330/ngx4330.ld +++ /dev/null @@ -1,343 +0,0 @@ -/* - * GENERATED FILE - DO NOT EDIT - * Copyright (c) 2008-2013 Code Red Technologies Ltd, - * Copyright 2015, 2018-2019 NXP - * (c) NXP Semiconductors 2013-2019 - * Generated linker script file for LPC4330 - * Created from linkscript.ldt by FMCreateLinkLibraries - * Using Freemarker v2.3.23 - * MCUXpresso IDE v11.0.0 [Build 2516] [2019-06-05] on Sep 9, 2019 12:09:49 PM - */ - -MEMORY -{ - /* Define each memory region */ - RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ - RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ - SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ -} - - /* Define a symbol for the top of each memory region */ - __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ - __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ - __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __base_SPIFI = 0x14000000 ; /* SPIFI */ - __base_Flash = 0x14000000 ; /* Flash */ - __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ - __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ - -ENTRY(ResetISR) - -SECTIONS -{ - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > SPIFI - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > SPIFI - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > SPIFI - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > SPIFI - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc72 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc72) - *(.data.$RAM2) - *(.data.$RamLoc72) - *(.data.$RAM2.*) - *(.data.$RamLoc72.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc72 AT>SPIFI - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3) - *(.data.$RamAHB32) - *(.data.$RAM3.*) - *(.data.$RamAHB32.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>SPIFI - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4) - *(.data.$RamAHB16) - *(.data.$RAM4.*) - *(.data.$RamAHB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>SPIFI - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5) - *(.data.$RamAHB_ETB16) - *(.data.$RAM5.*) - *(.data.$RamAHB_ETB16.*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>SPIFI - /* MAIN DATA SECTION */ - .uninit_RESERVED (NOLOAD) : - { - . = ALIGN(4) ; - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc128 - - /* Main DATA section (RamLoc128) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc128 AT>SPIFI - - /* BSS section for RamLoc72 */ - .bss_RAM2 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2) - *(.bss.$RamLoc72) - *(.bss.$RAM2.*) - *(.bss.$RamLoc72.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc72 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3) - *(.bss.$RamAHB32) - *(.bss.$RAM3.*) - *(.bss.$RamAHB32.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4) - *(.bss.$RamAHB16) - *(.bss.$RAM4.*) - *(.bss.$RamAHB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : - { - . = ALIGN(4) ; - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5) - *(.bss.$RamAHB_ETB16) - *(.bss.$RAM5.*) - *(.bss.$RamAHB_ETB16.*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : - { - . = ALIGN(4) ; - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc128 - - /* NOINIT section for RamLoc72 */ - .noinit_RAM2 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM2) - *(.noinit.$RamLoc72) - *(.noinit.$RAM2.*) - *(.noinit.$RamLoc72.*) - . = ALIGN(4) ; - } > RamLoc72 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM3) - *(.noinit.$RamAHB32) - *(.noinit.$RAM3.*) - *(.noinit.$RamAHB32.*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM4) - *(.noinit.$RamAHB16) - *(.noinit.$RAM4.*) - *(.noinit.$RamAHB16.*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : - { - . = ALIGN(4) ; - *(.noinit.$RAM5) - *(.noinit.$RamAHB_ETB16) - *(.noinit.$RAM5.*) - *(.noinit.$RamAHB_ETB16.*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): - { - . = ALIGN(4) ; - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc128 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc128 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index 4b53b9a4f..df22477df 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -13,9 +13,16 @@ CFLAGS += \ -DCONFIG_GPIO_AS_PINRESET # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual -Wno-error=redundant-decls - -LDFLAGS += -L$(TOP)/${NRFX_DIR}/mdk +CFLAGS += \ + -Wno-error=undef \ + -Wno-error=unused-parameter \ + -Wno-error=cast-align \ + -Wno-error=cast-qual \ + -Wno-error=redundant-decls + +LDFLAGS += \ + -specs=nosys.specs -specs=nano.specs \ + -L$(TOP)/${NRFX_DIR}/mdk SRC_C += \ src/portable/nordic/nrf5x/dcd_nrf5x.c \ diff --git a/hw/bsp/nutiny_nuc121s/board.mk b/hw/bsp/nutiny_nuc121s/board.mk index aa8f00e70..161ff9041 100644 --- a/hw/bsp/nutiny_nuc121s/board.mk +++ b/hw/bsp/nutiny_nuc121s/board.mk @@ -13,6 +13,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc121_flash.ld diff --git a/hw/bsp/nutiny_nuc125s/board.mk b/hw/bsp/nutiny_nuc125s/board.mk index bf7610a7b..081764fd3 100644 --- a/hw/bsp/nutiny_nuc125s/board.mk +++ b/hw/bsp/nutiny_nuc125s/board.mk @@ -13,6 +13,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc125_flash.ld diff --git a/hw/bsp/nutiny_nuc126v/board.mk b/hw/bsp/nutiny_nuc126v/board.mk index 46f53420c..2466b3a31 100644 --- a/hw/bsp/nutiny_nuc126v/board.mk +++ b/hw/bsp/nutiny_nuc126v/board.mk @@ -14,6 +14,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc126_flash.ld diff --git a/hw/bsp/nutiny_sdk_nuc120/board.mk b/hw/bsp/nutiny_sdk_nuc120/board.mk index b1f9245a6..b54895b58 100644 --- a/hw/bsp/nutiny_sdk_nuc120/board.mk +++ b/hw/bsp/nutiny_sdk_nuc120/board.mk @@ -9,6 +9,8 @@ CFLAGS += \ -DCFG_EXAMPLE_VIDEO_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_NUC120 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/nutiny_sdk_nuc120/nuc120_flash.ld diff --git a/hw/bsp/nutiny_sdk_nuc505/board.mk b/hw/bsp/nutiny_sdk_nuc505/board.mk index 3e48d3998..f3b389354 100644 --- a/hw/bsp/nutiny_sdk_nuc505/board.mk +++ b/hw/bsp/nutiny_sdk_nuc505/board.mk @@ -12,6 +12,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc505_flashtoram.ld diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 9afb38e06..4447e8499 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -31,6 +31,8 @@ else $(info "Using PORT 0 FullSpeed") endif +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ diff --git a/hw/bsp/rx/family.mk b/hw/bsp/rx/family.mk index 3044167b9..02ea0dfa4 100644 --- a/hw/bsp/rx/family.mk +++ b/hw/bsp/rx/family.mk @@ -16,6 +16,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index 43a60a122..38430f017 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -18,6 +18,8 @@ CFLAGS += -Wno-error=redundant-decls # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ hw/mcu/microchip/samd11/gcc/gcc/startup_samd11.c \ diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 79c63812d..3302aade5 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -16,6 +16,8 @@ CFLAGS += -Wno-error=redundant-decls # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ ${SDK_DIR}/gcc/gcc/startup_samd21.c \ diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk index 9a6c67e1a..94ca68705 100644 --- a/hw/bsp/samd51/family.mk +++ b/hw/bsp/samd51/family.mk @@ -12,6 +12,8 @@ CFLAGS += \ # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ hw/mcu/microchip/samd51/gcc/gcc/startup_samd51.c \ diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk index 691863f11..b2bf0d359 100644 --- a/hw/bsp/same5x/family.mk +++ b/hw/bsp/same5x/family.mk @@ -13,6 +13,8 @@ CFLAGS += \ # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ $(SDK_DIR)/gcc/gcc/startup_$(MCU).c \ diff --git a/hw/bsp/same70_qmtech/board.mk b/hw/bsp/same70_qmtech/board.mk index ad5af2020..281a947f3 100644 --- a/hw/bsp/same70_qmtech/board.mk +++ b/hw/bsp/same70_qmtech/board.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/microchip +ASF_DIR = hw/mcu/microchip/same70 CFLAGS += \ -mthumb \ @@ -16,7 +17,7 @@ CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual -ASF_DIR = hw/mcu/microchip/same70 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk index 769d03e21..3edc128a5 100644 --- a/hw/bsp/same70_xplained/board.mk +++ b/hw/bsp/same70_xplained/board.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/microchip +ASF_DIR = hw/mcu/microchip/same70 CFLAGS += \ -mthumb \ @@ -16,7 +17,7 @@ CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=redundant # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual -ASF_DIR = hw/mcu/microchip/same70 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(ASF_DIR)/same70b/gcc/gcc/same70q21b_flash.ld diff --git a/hw/bsp/samg55xplained/board.mk b/hw/bsp/samg55xplained/board.mk index ed0d59772..a9328be11 100644 --- a/hw/bsp/samg55xplained/board.mk +++ b/hw/bsp/samg55xplained/board.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/microchip +ASF_DIR = hw/mcu/microchip/samg55 CFLAGS += \ -flto \ @@ -17,7 +18,7 @@ CFLAGS += -Wno-error=undef -Wno-error=null-dereference -Wno-error=redundant-decl # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual -ASF_DIR = hw/mcu/microchip/samg55 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/samg55j19_flash.ld diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index 0acb0ed14..59dbc9a25 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -16,6 +16,8 @@ CFLAGS += -Wno-error=redundant-decls # SAM driver is flooded with -Wcast-qual which slow down complication significantly CFLAGS_SKIP += -Wcast-qual +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ $(MCU_DIR)/gcc/gcc/startup_$(SAML_VARIANT).c \ diff --git a/hw/bsp/sltb009a/board.mk b/hw/bsp/sltb009a/board.mk index f9c1dd4db..a04bc19d8 100644 --- a/hw/bsp/sltb009a/board.mk +++ b/hw/bsp/sltb009a/board.mk @@ -19,6 +19,8 @@ SILABS_CMSIS = hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY)/Device/SiliconLabs/$(she DEPS_SUBMODULES += hw/mcu/silabs/cmsis-dfp-$(SILABS_FAMILY) DEPS_SUBMODULES += lib/CMSIS_5 +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # All source paths should be relative to the top level. LD_FILE = $(SILABS_CMSIS)/Source/GCC/$(SILABS_FAMILY).ld diff --git a/hw/bsp/spresense/board.mk b/hw/bsp/spresense/board.mk index 78d7f6a66..15fa0ff20 100644 --- a/hw/bsp/spresense/board.mk +++ b/hw/bsp/spresense/board.mk @@ -38,6 +38,8 @@ CFLAGS += \ # lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration CFLAGS += -Wno-error=shadow -Wno-error=redundant-decls +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk SRC_C += src/portable/sony/cxd56/dcd_cxd56.c diff --git a/hw/bsp/stm32f0/family.mk b/hw/bsp/stm32f0/family.mk index 129a3b73a..537df4d7b 100644 --- a/hw/bsp/stm32f0/family.mk +++ b/hw/bsp/stm32f0/family.mk @@ -23,6 +23,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=unused-parameter -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ------------------------ # All source paths should be relative to the top level. # ------------------------ diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk index d3627f47a..90a984bfe 100644 --- a/hw/bsp/stm32f1/family.mk +++ b/hw/bsp/stm32f1/family.mk @@ -18,6 +18,8 @@ CFLAGS_GCC += \ -flto \ -nostdlib -nostartfiles \ +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ------------------------ # All source paths should be relative to the top level. # ------------------------ diff --git a/hw/bsp/stm32f2/family.mk b/hw/bsp/stm32f2/family.mk index ce50b16ad..c6ef1ec1d 100644 --- a/hw/bsp/stm32f2/family.mk +++ b/hw/bsp/stm32f2/family.mk @@ -21,6 +21,8 @@ CFLAGS_GCC += \ # mcu driver cause following warnings CFLAGS_GCC += -Wno-error=sign-compare +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32f3/family.mk b/hw/bsp/stm32f3/family.mk index a740e9012..be8271d96 100644 --- a/hw/bsp/stm32f3/family.mk +++ b/hw/bsp/stm32f3/family.mk @@ -19,6 +19,8 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index 0f4c792ab..ecbbff417 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -25,6 +25,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index 7f37a7e40..1cdf23c6b 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -35,6 +35,8 @@ CFLAGS_GCC += \ # mcu driver cause following warnings CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32g0/family.mk b/hw/bsp/stm32g0/family.mk index 6b199f21a..fb382b56a 100644 --- a/hw/bsp/stm32g0/family.mk +++ b/hw/bsp/stm32g0/family.mk @@ -21,6 +21,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk index 2efe91449..4b0c6922d 100644 --- a/hw/bsp/stm32g4/family.mk +++ b/hw/bsp/stm32g4/family.mk @@ -22,6 +22,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index a1ff26d0b..0777bb9c2 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -35,6 +35,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk index 43f567b50..a811e1823 100644 --- a/hw/bsp/stm32l0/family.mk +++ b/hw/bsp/stm32l0/family.mk @@ -24,6 +24,8 @@ CFLAGS += \ -Wno-error=cast-align \ -Wno-error=maybe-uninitialized +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk index c16040887..956f82263 100644 --- a/hw/bsp/stm32l4/family.mk +++ b/hw/bsp/stm32l4/family.mk @@ -21,6 +21,8 @@ CFLAGS_GCC += \ # suppress warning caused by vendor mcu driver CFLAGS_GCC += -Wno-error=maybe-uninitialized -Wno-error=cast-align +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + # ----------------- # Sources & Include # ----------------- diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index c3e66c5a5..2144ef37b 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -15,6 +15,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=undef -Wno-error=unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index bc3afcaff..287b58ce5 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -16,6 +16,8 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=cast-align -Wno-unused-parameter +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ diff --git a/hw/bsp/tm4c123/family.mk b/hw/bsp/tm4c123/family.mk index 608c530bb..49e39f6a0 100644 --- a/hw/bsp/tm4c123/family.mk +++ b/hw/bsp/tm4c123/family.mk @@ -1,4 +1,5 @@ DEPS_SUBMODULES += hw/mcu/ti +MCU_DIR=hw/mcu/ti/tm4c123xx include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 @@ -12,7 +13,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual -MCU_DIR=hw/mcu/ti/tm4c123xx/ +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/tm4c123.ld -- cgit v1.3.1 From 7213b8abb126cb6a1c88bd1e6d89b7dbacf339d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Nov 2023 20:06:22 +0700 Subject: move tools/cmake to examples/build_system --- examples/build_system/cmake/cpu/cortex-m0.cmake | 17 ++++++++ .../build_system/cmake/cpu/cortex-m0plus.cmake | 17 ++++++++ examples/build_system/cmake/cpu/cortex-m23.cmake | 17 ++++++++ examples/build_system/cmake/cpu/cortex-m3.cmake | 16 ++++++++ examples/build_system/cmake/cpu/cortex-m33.cmake | 19 +++++++++ examples/build_system/cmake/cpu/cortex-m4.cmake | 23 +++++++++++ examples/build_system/cmake/cpu/cortex-m7.cmake | 19 +++++++++ .../build_system/cmake/toolchain/arm_gcc.cmake | 46 ++++++++++++++++++++++ .../build_system/cmake/toolchain/arm_iar.cmake | 31 +++++++++++++++ .../build_system/cmake/toolchain/set_flags.cmake | 17 ++++++++ hw/bsp/imxrt/family.cmake | 2 +- hw/bsp/kinetis_kl/family.cmake | 2 +- hw/bsp/lpc18/family.cmake | 2 +- hw/bsp/lpc40/family.cmake | 2 +- hw/bsp/lpc43/family.cmake | 2 +- hw/bsp/lpc54/family.cmake | 2 +- hw/bsp/lpc55/family.cmake | 2 +- hw/bsp/mcx/family.cmake | 2 +- hw/bsp/nrf/family.cmake | 2 +- hw/bsp/ra/family.cmake | 2 +- hw/bsp/samd21/family.cmake | 2 +- hw/bsp/samd51/family.cmake | 2 +- hw/bsp/stm32f0/family.cmake | 2 +- hw/bsp/stm32f1/family.cmake | 2 +- hw/bsp/stm32f4/family.cmake | 2 +- hw/bsp/stm32f7/family.cmake | 2 +- hw/bsp/stm32g0/family.cmake | 2 +- hw/bsp/stm32g4/family.cmake | 2 +- hw/bsp/stm32h7/family.cmake | 2 +- hw/bsp/stm32l4/family.cmake | 2 +- hw/bsp/stm32u5/family.cmake | 2 +- tools/cmake/cpu/cortex-m0.cmake | 17 -------- tools/cmake/cpu/cortex-m0plus.cmake | 17 -------- tools/cmake/cpu/cortex-m23.cmake | 17 -------- tools/cmake/cpu/cortex-m3.cmake | 16 -------- tools/cmake/cpu/cortex-m33.cmake | 19 --------- tools/cmake/cpu/cortex-m4.cmake | 23 ----------- tools/cmake/cpu/cortex-m7.cmake | 19 --------- tools/cmake/toolchain/arm_gcc.cmake | 46 ---------------------- tools/cmake/toolchain/arm_iar.cmake | 31 --------------- tools/cmake/toolchain/set_flags.cmake | 17 -------- 41 files changed, 243 insertions(+), 243 deletions(-) create mode 100644 examples/build_system/cmake/cpu/cortex-m0.cmake create mode 100644 examples/build_system/cmake/cpu/cortex-m0plus.cmake create mode 100644 examples/build_system/cmake/cpu/cortex-m23.cmake create mode 100644 examples/build_system/cmake/cpu/cortex-m3.cmake create mode 100644 examples/build_system/cmake/cpu/cortex-m33.cmake create mode 100644 examples/build_system/cmake/cpu/cortex-m4.cmake create mode 100644 examples/build_system/cmake/cpu/cortex-m7.cmake create mode 100644 examples/build_system/cmake/toolchain/arm_gcc.cmake create mode 100644 examples/build_system/cmake/toolchain/arm_iar.cmake create mode 100644 examples/build_system/cmake/toolchain/set_flags.cmake delete mode 100644 tools/cmake/cpu/cortex-m0.cmake delete mode 100644 tools/cmake/cpu/cortex-m0plus.cmake delete mode 100644 tools/cmake/cpu/cortex-m23.cmake delete mode 100644 tools/cmake/cpu/cortex-m3.cmake delete mode 100644 tools/cmake/cpu/cortex-m33.cmake delete mode 100644 tools/cmake/cpu/cortex-m4.cmake delete mode 100644 tools/cmake/cpu/cortex-m7.cmake delete mode 100644 tools/cmake/toolchain/arm_gcc.cmake delete mode 100644 tools/cmake/toolchain/arm_iar.cmake delete mode 100644 tools/cmake/toolchain/set_flags.cmake (limited to 'hw/bsp/mcx') diff --git a/examples/build_system/cmake/cpu/cortex-m0.cmake b/examples/build_system/cmake/cpu/cortex-m0.cmake new file mode 100644 index 000000000..bc2257048 --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m0.cmake @@ -0,0 +1,17 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m0plus + -mfloat-abi=soft + ) + + set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m0 + ) + + set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-m0plus.cmake b/examples/build_system/cmake/cpu/cortex-m0plus.cmake new file mode 100644 index 000000000..bc2257048 --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m0plus.cmake @@ -0,0 +1,17 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m0plus + -mfloat-abi=soft + ) + + set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m0 + ) + + set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-m23.cmake b/examples/build_system/cmake/cpu/cortex-m23.cmake new file mode 100644 index 000000000..3093dc99a --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m23.cmake @@ -0,0 +1,17 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m23 + -mfloat-abi=soft + ) + + set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m23 + ) + + set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-m3.cmake b/examples/build_system/cmake/cpu/cortex-m3.cmake new file mode 100644 index 000000000..f6f5a62f8 --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m3.cmake @@ -0,0 +1,16 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m3 + ) + + set(FREERTOS_PORT GCC_ARM_CM3 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m3 + ) + + set(FREERTOS_PORT IAR_ARM_CM3 CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-m33.cmake b/examples/build_system/cmake/cpu/cortex-m33.cmake new file mode 100644 index 000000000..7ebaf1748 --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m33.cmake @@ -0,0 +1,19 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m33 + -mfloat-abi=hard + -mfpu=fpv5-sp-d16 + ) + + set(FREERTOS_PORT GCC_ARM_CM33_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m33 + --fpu VFPv5-SP + ) + + set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-m4.cmake b/examples/build_system/cmake/cpu/cortex-m4.cmake new file mode 100644 index 000000000..4e9bc242d --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m4.cmake @@ -0,0 +1,23 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m4 + -mfloat-abi=hard + -mfpu=fpv4-sp-d16 + ) + + if (NOT DEFINED FREERTOS_PORT) + set(FREERTOS_PORT GCC_ARM_CM4F CACHE INTERNAL "") + endif () + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m4 + --fpu VFPv4 + ) + + if (NOT DEFINED FREERTOS_PORT) + set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") + endif () + +endif () diff --git a/examples/build_system/cmake/cpu/cortex-m7.cmake b/examples/build_system/cmake/cpu/cortex-m7.cmake new file mode 100644 index 000000000..3e5f7f44b --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m7.cmake @@ -0,0 +1,19 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m7 + -mfloat-abi=hard + -mfpu=fpv5-d16 + ) + + set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m7 + --fpu VFPv5_D16 + ) + + set(FREERTOS_PORT IAR_ARM_CM7 CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/toolchain/arm_gcc.cmake b/examples/build_system/cmake/toolchain/arm_gcc.cmake new file mode 100644 index 000000000..7680d75ab --- /dev/null +++ b/examples/build_system/cmake/toolchain/arm_gcc.cmake @@ -0,0 +1,46 @@ +set(CMAKE_SYSTEM_NAME Generic) + +set(CMAKE_C_COMPILER "arm-none-eabi-gcc") +set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") +set(CMAKE_ASM_COMPILER "arm-none-eabi-gcc") + +set(CMAKE_SIZE "arm-none-eabi-size" CACHE FILEPATH "") +set(CMAKE_OBJCOPY "arm-none-eabi-objcopy" CACHE FILEPATH "") +set(CMAKE_OBJDUMP "arm-none-eabi-objdump" CACHE FILEPATH "") + +set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) + +# Look for includes and libraries only in the target system prefix. +set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) + +# pass TOOLCHAIN_CPU to +set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR) + +include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_PROCESSOR}.cmake) + +# enable all possible warnings for building examples +list(APPEND TOOLCHAIN_COMMON_FLAGS + -fdata-sections + -ffunction-sections + -fsingle-precision-constant + -fno-strict-aliasing + ) + +list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS + -Wl,--print-memory-usage + -Wl,--gc-sections + -Wl,--cref + ) + +include(${CMAKE_CURRENT_LIST_DIR}/set_flags.cmake) + +# try_compile is cmake test compiling its own example, +# pass -nostdlib to skip stdlib linking +get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) +if (IS_IN_TRY_COMPILE) + set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") + set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") +endif () diff --git a/examples/build_system/cmake/toolchain/arm_iar.cmake b/examples/build_system/cmake/toolchain/arm_iar.cmake new file mode 100644 index 000000000..a487e5b9f --- /dev/null +++ b/examples/build_system/cmake/toolchain/arm_iar.cmake @@ -0,0 +1,31 @@ +set(CMAKE_SYSTEM_NAME Generic) + +set(CMAKE_C_COMPILER "iccarm") +set(CMAKE_CXX_COMPILER "iccarm") +set(CMAKE_ASM_COMPILER "iasmarm") + +set(CMAKE_SIZE "size" CACHE FILEPATH "") +set(CMAKE_OBJCOPY "ielftool" CACHE FILEPATH "") +set(CMAKE_OBJDUMP "iefdumparm" CACHE FILEPATH "") + +set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) + +# Look for includes and libraries only in the target system prefix. +set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY) +set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) + +# pass TOOLCHAIN_CPU to +set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR) + +include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_PROCESSOR}.cmake) + +# enable all possible warnings for building examples +list(APPEND TOOLCHAIN_COMMON_FLAGS + ) + +list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS + ) + +include(${CMAKE_CURRENT_LIST_DIR}/set_flags.cmake) diff --git a/examples/build_system/cmake/toolchain/set_flags.cmake b/examples/build_system/cmake/toolchain/set_flags.cmake new file mode 100644 index 000000000..44930ef4d --- /dev/null +++ b/examples/build_system/cmake/toolchain/set_flags.cmake @@ -0,0 +1,17 @@ +include(CMakePrintHelpers) + +# join the toolchain flags into a single string +list(JOIN TOOLCHAIN_COMMON_FLAGS " " TOOLCHAIN_COMMON_FLAGS) + +foreach (LANG IN ITEMS C CXX ASM) + set(CMAKE_${LANG}_FLAGS_INIT ${TOOLCHAIN_COMMON_FLAGS}) + + #cmake_print_variables(CMAKE_${LANG}_FLAGS_INIT) + + # optimization flags for LOG, LOGGER ? + #set(CMAKE_${LANG}_FLAGS_RELEASE_INIT "-Os") + #set(CMAKE_${LANG}_FLAGS_DEBUG_INIT "-O0") +endforeach () + +# Linker +list(JOIN TOOLCHAIN_EXE_LINKER_FLAGS " " CMAKE_EXE_LINKER_FLAGS_INIT) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index ecde39611..090014754 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -13,7 +13,7 @@ set(MCU_VARIANT_WITH_CORE ${MCU_VARIANT}${MCU_CORE}) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "") diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 4151979a0..6d9b65df0 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 74a794bde..78f4c510b 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -11,7 +11,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 56eb37a2f..fce9772b6 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 608fc4ca3..f66da98aa 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC43XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index cdd513fe4..287b437fb 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC54 CACHE INTERNAL "") diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index dce197b2d..75dabfe5a 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC55 CACHE INTERNAL "") diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index b3a4a846e..13d1d44ef 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -12,7 +12,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 8cee2b433..2c4620b97 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -19,7 +19,7 @@ else () set(JLINK_DEVICE ${MCU_VARIANT}_xxaa) endif () -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS NRF5X CACHE INTERNAL "") diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 11bc7c668..426e1ca8f 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -11,7 +11,7 @@ set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) #set(FREERTOS_PORT A_CUSTOM_PORT CACHE INTERNAL "") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "") diff --git a/hw/bsp/samd21/family.cmake b/hw/bsp/samd21/family.cmake index 07186934a..44aad6ecb 100644 --- a/hw/bsp/samd21/family.cmake +++ b/hw/bsp/samd21/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMD21 CACHE INTERNAL "") diff --git a/hw/bsp/samd51/family.cmake b/hw/bsp/samd51/family.cmake index fa9586066..7591f3b1b 100644 --- a/hw/bsp/samd51/family.cmake +++ b/hw/bsp/samd51/family.cmake @@ -7,7 +7,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMD51 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index e0fc705f8..89c93c47a 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 53af35862..6657c85ce 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F1 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index cad504bac..71ec33c6e 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 48dd9c7ca..5b3bdf17e 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F7 CACHE INTERNAL "") diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index cf52a6324..0a9779022 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index eee6bd9ed..15a834a00 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index 2d6ec76c8..6174dfda3 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 87f87004b..9b06a64d4 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32L4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 2e4ed7d50..cde1df5ca 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -16,7 +16,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32U5 CACHE INTERNAL "") diff --git a/tools/cmake/cpu/cortex-m0.cmake b/tools/cmake/cpu/cortex-m0.cmake deleted file mode 100644 index bc2257048..000000000 --- a/tools/cmake/cpu/cortex-m0.cmake +++ /dev/null @@ -1,17 +0,0 @@ -if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m0plus - -mfloat-abi=soft - ) - - set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") - -elseif (TOOLCHAIN STREQUAL "iar") - set(TOOLCHAIN_COMMON_FLAGS - --cpu cortex-m0 - ) - - set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") - -endif () diff --git a/tools/cmake/cpu/cortex-m0plus.cmake b/tools/cmake/cpu/cortex-m0plus.cmake deleted file mode 100644 index bc2257048..000000000 --- a/tools/cmake/cpu/cortex-m0plus.cmake +++ /dev/null @@ -1,17 +0,0 @@ -if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m0plus - -mfloat-abi=soft - ) - - set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") - -elseif (TOOLCHAIN STREQUAL "iar") - set(TOOLCHAIN_COMMON_FLAGS - --cpu cortex-m0 - ) - - set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") - -endif () diff --git a/tools/cmake/cpu/cortex-m23.cmake b/tools/cmake/cpu/cortex-m23.cmake deleted file mode 100644 index 3093dc99a..000000000 --- a/tools/cmake/cpu/cortex-m23.cmake +++ /dev/null @@ -1,17 +0,0 @@ -if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m23 - -mfloat-abi=soft - ) - - set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") - -elseif (TOOLCHAIN STREQUAL "iar") - set(TOOLCHAIN_COMMON_FLAGS - --cpu cortex-m23 - ) - - set(FREERTOS_PORT IAR_ARM_CM0 CACHE INTERNAL "") - -endif () diff --git a/tools/cmake/cpu/cortex-m3.cmake b/tools/cmake/cpu/cortex-m3.cmake deleted file mode 100644 index f6f5a62f8..000000000 --- a/tools/cmake/cpu/cortex-m3.cmake +++ /dev/null @@ -1,16 +0,0 @@ -if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m3 - ) - - set(FREERTOS_PORT GCC_ARM_CM3 CACHE INTERNAL "") - -elseif (TOOLCHAIN STREQUAL "iar") - set(TOOLCHAIN_COMMON_FLAGS - --cpu cortex-m3 - ) - - set(FREERTOS_PORT IAR_ARM_CM3 CACHE INTERNAL "") - -endif () diff --git a/tools/cmake/cpu/cortex-m33.cmake b/tools/cmake/cpu/cortex-m33.cmake deleted file mode 100644 index 7ebaf1748..000000000 --- a/tools/cmake/cpu/cortex-m33.cmake +++ /dev/null @@ -1,19 +0,0 @@ -if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m33 - -mfloat-abi=hard - -mfpu=fpv5-sp-d16 - ) - - set(FREERTOS_PORT GCC_ARM_CM33_NTZ_NONSECURE CACHE INTERNAL "") - -elseif (TOOLCHAIN STREQUAL "iar") - set(TOOLCHAIN_COMMON_FLAGS - --cpu cortex-m33 - --fpu VFPv5-SP - ) - - set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") - -endif () diff --git a/tools/cmake/cpu/cortex-m4.cmake b/tools/cmake/cpu/cortex-m4.cmake deleted file mode 100644 index 4e9bc242d..000000000 --- a/tools/cmake/cpu/cortex-m4.cmake +++ /dev/null @@ -1,23 +0,0 @@ -if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m4 - -mfloat-abi=hard - -mfpu=fpv4-sp-d16 - ) - - if (NOT DEFINED FREERTOS_PORT) - set(FREERTOS_PORT GCC_ARM_CM4F CACHE INTERNAL "") - endif () - -elseif (TOOLCHAIN STREQUAL "iar") - set(TOOLCHAIN_COMMON_FLAGS - --cpu cortex-m4 - --fpu VFPv4 - ) - - if (NOT DEFINED FREERTOS_PORT) - set(FREERTOS_PORT IAR_ARM_CM4F CACHE INTERNAL "") - endif () - -endif () diff --git a/tools/cmake/cpu/cortex-m7.cmake b/tools/cmake/cpu/cortex-m7.cmake deleted file mode 100644 index 3e5f7f44b..000000000 --- a/tools/cmake/cpu/cortex-m7.cmake +++ /dev/null @@ -1,19 +0,0 @@ -if (TOOLCHAIN STREQUAL "gcc") - set(TOOLCHAIN_COMMON_FLAGS - -mthumb - -mcpu=cortex-m7 - -mfloat-abi=hard - -mfpu=fpv5-d16 - ) - - set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") - -elseif (TOOLCHAIN STREQUAL "iar") - set(TOOLCHAIN_COMMON_FLAGS - --cpu cortex-m7 - --fpu VFPv5_D16 - ) - - set(FREERTOS_PORT IAR_ARM_CM7 CACHE INTERNAL "") - -endif () diff --git a/tools/cmake/toolchain/arm_gcc.cmake b/tools/cmake/toolchain/arm_gcc.cmake deleted file mode 100644 index 7680d75ab..000000000 --- a/tools/cmake/toolchain/arm_gcc.cmake +++ /dev/null @@ -1,46 +0,0 @@ -set(CMAKE_SYSTEM_NAME Generic) - -set(CMAKE_C_COMPILER "arm-none-eabi-gcc") -set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") -set(CMAKE_ASM_COMPILER "arm-none-eabi-gcc") - -set(CMAKE_SIZE "arm-none-eabi-size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "arm-none-eabi-objcopy" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "arm-none-eabi-objdump" CACHE FILEPATH "") - -set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) - -# Look for includes and libraries only in the target system prefix. -set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) -set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) -set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY) -set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) - -# pass TOOLCHAIN_CPU to -set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR) - -include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_PROCESSOR}.cmake) - -# enable all possible warnings for building examples -list(APPEND TOOLCHAIN_COMMON_FLAGS - -fdata-sections - -ffunction-sections - -fsingle-precision-constant - -fno-strict-aliasing - ) - -list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS - -Wl,--print-memory-usage - -Wl,--gc-sections - -Wl,--cref - ) - -include(${CMAKE_CURRENT_LIST_DIR}/set_flags.cmake) - -# try_compile is cmake test compiling its own example, -# pass -nostdlib to skip stdlib linking -get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) -if (IS_IN_TRY_COMPILE) - set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") - set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") -endif () diff --git a/tools/cmake/toolchain/arm_iar.cmake b/tools/cmake/toolchain/arm_iar.cmake deleted file mode 100644 index a487e5b9f..000000000 --- a/tools/cmake/toolchain/arm_iar.cmake +++ /dev/null @@ -1,31 +0,0 @@ -set(CMAKE_SYSTEM_NAME Generic) - -set(CMAKE_C_COMPILER "iccarm") -set(CMAKE_CXX_COMPILER "iccarm") -set(CMAKE_ASM_COMPILER "iasmarm") - -set(CMAKE_SIZE "size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "ielftool" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "iefdumparm" CACHE FILEPATH "") - -set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) - -# Look for includes and libraries only in the target system prefix. -set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY) -set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY) -set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY) -set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) - -# pass TOOLCHAIN_CPU to -set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR) - -include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_PROCESSOR}.cmake) - -# enable all possible warnings for building examples -list(APPEND TOOLCHAIN_COMMON_FLAGS - ) - -list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS - ) - -include(${CMAKE_CURRENT_LIST_DIR}/set_flags.cmake) diff --git a/tools/cmake/toolchain/set_flags.cmake b/tools/cmake/toolchain/set_flags.cmake deleted file mode 100644 index 44930ef4d..000000000 --- a/tools/cmake/toolchain/set_flags.cmake +++ /dev/null @@ -1,17 +0,0 @@ -include(CMakePrintHelpers) - -# join the toolchain flags into a single string -list(JOIN TOOLCHAIN_COMMON_FLAGS " " TOOLCHAIN_COMMON_FLAGS) - -foreach (LANG IN ITEMS C CXX ASM) - set(CMAKE_${LANG}_FLAGS_INIT ${TOOLCHAIN_COMMON_FLAGS}) - - #cmake_print_variables(CMAKE_${LANG}_FLAGS_INIT) - - # optimization flags for LOG, LOGGER ? - #set(CMAKE_${LANG}_FLAGS_RELEASE_INIT "-Os") - #set(CMAKE_${LANG}_FLAGS_DEBUG_INIT "-O0") -endforeach () - -# Linker -list(JOIN TOOLCHAIN_EXE_LINKER_FLAGS " " CMAKE_EXE_LINKER_FLAGS_INIT) -- cgit v1.3.1 From 1a3f5f7a09d523872d8ab42fc3b432c19e8845b7 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 18 Dec 2023 20:33:43 +0700 Subject: update FreeRTOSConfig.h - remove configAssert() - configCHECK_HANDLER_INSTALLATION=0 (to prevent unused-parameter error with configAssert(x)=nil --- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h | 1 + hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h | 18 +----------------- 25 files changed, 25 insertions(+), 408 deletions(-) (limited to 'hw/bsp/mcx') diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 69d638288..6cc7a6577 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -96,6 +96,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -130,23 +131,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - #ifdef __RX__ /* Renesas RX series */ #define vSoftwareInterruptISR INT_Excep_ICU_SWINT diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 69d638288..6cc7a6577 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -96,6 +96,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -130,23 +131,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - #ifdef __RX__ /* Renesas RX series */ #define vSoftwareInterruptISR INT_Excep_ICU_SWINT diff --git a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index a1fc8bb09..bd754518d 100644 --- a/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/host/cdc_msc_hid_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -105,6 +105,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -139,23 +140,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - #ifdef __RX__ /* Renesas RX series */ #define vSoftwareInterruptISR INT_Excep_ICU_SWINT diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index 0248f0b47..7152fda01 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h index e7bd4705a..f2b3d649d 100644 --- a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h index b8b8268f7..17ddc1da4 100644 --- a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h index eb0da971f..8cd3ee3d8 100644 --- a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h index b8b8268f7..17ddc1da4 100644 --- a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h index e70debfc0..6f10a7ab0 100644 --- a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h index e70debfc0..6f10a7ab0 100644 --- a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index e70debfc0..6f10a7ab0 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h index 00f832b84..0ddd536fb 100644 --- a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h index cf643d6e5..57ed3a9e4 100644 --- a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -96,6 +96,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -131,23 +132,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h index d83c79601..4aa0f8cca 100644 --- a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h index 923627b70..a283560fe 100644 --- a/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd51/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h index fa7092537..b9a54b9b3 100644 --- a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h index 2bc6b926b..d001411d9 100644 --- a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h index dfe5fb6cf..e9828cbb2 100644 --- a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h index 3ad0e794e..31fb7942f 100644 --- a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h index e15740e65..e1a7bb135 100644 --- a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h index d38801732..fa3f0ac33 100644 --- a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h index 34398c448..cf6e23c1b 100644 --- a/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h5/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h index bf7a80043..8bbeefcc7 100644 --- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h index 9b2af0a22..23ba069aa 100644 --- a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler diff --git a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h index 1223274dc..b51020590 100644 --- a/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32u5/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,6 +81,7 @@ #define configUSE_TICK_HOOK 0 #define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning #define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 /* Run time and task stats gathering related definitions. */ #define configGENERATE_RUN_TIME_STATS 0 @@ -116,23 +117,6 @@ #define INCLUDE_xEventGroupSetBitFromISR 0 #define INCLUDE_xTimerPendFunctionCall 0 -/* Define to trap errors during development. */ -// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) - #define configASSERT(_exp) \ - do {\ - if ( !(_exp) ) { \ - volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ - if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ - taskDISABLE_INTERRUPTS(); \ - __asm("BKPT #0\n"); \ - }\ - }\ - } while(0) -#else - #define configASSERT( x ) -#endif - /* FreeRTOS hooks to NVIC vectors */ #define xPortPendSVHandler PendSV_Handler #define xPortSysTickHandler SysTick_Handler -- cgit v1.3.1