From 1dbbfdfe45bfa882c9833e94de6e7ea89f8341aa Mon Sep 17 00:00:00 2001
From: hathach <thach@tinyusb.org>
Date: Wed, 24 Feb 2021 12:34:23 +0700
Subject: clean up

---
 hw/bsp/ngx4330/ngx4330.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

(limited to 'hw/bsp/ngx4330')

diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c
index 2e4ff9af9..b63f9b894 100644
--- a/hw/bsp/ngx4330/ngx4330.c
+++ b/hw/bsp/ngx4330/ngx4330.c
@@ -169,20 +169,6 @@ void board_init(void)
    */
 #if CFG_TUSB_RHPORT0_MODE
   Chip_USB0_Init();
-
-//  // Reset controller
-//  LPC_USB0->USBCMD_D |= 0x02;
-//  while( LPC_USB0->USBCMD_D & 0x02 ) {}
-//
-//  // Set mode
-//  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
-//    LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-//
-//    LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging
-//  #else // TODO OTG
-//    LPC_USB0->USBMODE_D = USBMODE_DEVICE;
-//    LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
-//  #endif
 #endif
 
   /* USB1
@@ -206,20 +192,6 @@ void board_init(void)
 #if CFG_TUSB_RHPORT1_MODE
   Chip_USB1_Init();
 
-//  // Reset controller
-//  LPC_USB1->USBCMD_D |= 0x02;
-//  while( LPC_USB1->USBCMD_D & 0x02 ) {}
-//
-//  // Set mode
-//  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
-//    LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-//  #else // TODO OTG
-//    LPC_USB1->USBMODE_D = USBMODE_DEVICE;
-//  #endif
-//
-//  // USB1 as fullspeed
-//  LPC_USB1->PORTSC1_D |= (1<<24);
-
 //	Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6);							/* GPIO5[6] = USB1_PWR_EN */
 //	Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true);							/* GPIO5[6] output high */
 #endif
-- 
cgit v1.3.1