From 0074ed7c6756d3543dc2e89b0081039001ad230c Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 21:50:50 +0100 Subject: Add bin & hex output to cmake targets. --- hw/bsp/ra/family.cmake | 1 + 1 file changed, 1 insertion(+) (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 426e1ca8f..a73c7239d 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -124,6 +124,7 @@ function(family_configure_example TARGET RTOS) target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing + family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) if (DEFINED DFU_UTIL_VID_PID) -- cgit v1.3.1 From f934224351ea4bc14086fb113dc05a5ded707405 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 22:26:33 +0100 Subject: Fix cmake options. Signed-off-by: HiFiPhile --- hw/bsp/family_support.cmake | 15 +++++++++++---- hw/bsp/imxrt/family.cmake | 6 ++---- hw/bsp/kinetis_k32l2/family.cmake | 3 +-- hw/bsp/ra/family.cmake | 3 +-- 4 files changed, 15 insertions(+), 12 deletions(-) (limited to 'hw/bsp/ra') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 82e3badb3..ddb17cbb0 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -300,10 +300,17 @@ endfunction() # Add bin/hex output function(family_add_bin_hex TARGET) - add_custom_command(TARGET ${TARGET} POST_BUILD - COMMAND ${CMAKE_OBJCOPY} -Obinary $ $/${TARGET}.bin - COMMAND ${CMAKE_OBJCOPY} -Oihex $ $/${TARGET}.hex - VERBATIM) + if (CMAKE_C_COMPILER_ID STREQUAL "IAR") + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${CMAKE_OBJCOPY} --bin $ $/${TARGET}.bin + COMMAND ${CMAKE_OBJCOPY} --ihex $ $/${TARGET}.hex + VERBATIM) + else() + add_custom_command(TARGET ${TARGET} POST_BUILD + COMMAND ${CMAKE_OBJCOPY} -Obinary $ $/${TARGET}.bin + COMMAND ${CMAKE_OBJCOPY} -Oihex $ $/${TARGET}.hex + VERBATIM) + endif() endfunction() # Add uf2 output diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 76b0ff664..27a5f26aa 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -27,13 +27,13 @@ function(add_board_target BOARD_TARGET) # LD_FILE and STARTUP_FILE can be defined in board.cmake if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx${MCU_CORE}_flexspi_nor.ld) - #set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) + set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/iar/${MCU_VARIANT}xxxxx${MCU_CORE}_flexspi_nor.icf) endif () set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT_WITH_CORE}.S) - #set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT_WITH_CORE}.S) + set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/iar/startup_${MCU_VARIANT_WITH_CORE}.s) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) @@ -149,8 +149,6 @@ function(family_configure_example TARGET RTOS) # Link dependencies target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) - family_add_bin_hex(${TARGET}) - # Flashing family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index 90d35cce3..e0843b5a4 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -103,11 +103,10 @@ function(family_configure_example TARGET RTOS) target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing - family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) + family_add_bin_hex(${TARGET}) if (DEFINED TEENSY_MCU) - family_add_bin_hex(${TARGET}) family_flash_teensy(${TARGET}) endif () endfunction() diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index a73c7239d..a685d4118 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -124,11 +124,10 @@ function(family_configure_example TARGET RTOS) target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing - family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) + family_add_bin_hex(${TARGET}) if (DEFINED DFU_UTIL_VID_PID) - family_add_bin_hex(${TARGET}) family_flash_dfu_util(${TARGET} ${DFU_UTIL_VID_PID}) endif () endfunction() -- cgit v1.3.1 From b5e84d26c26c47f41e77d8f7fb4f4e2ffb25c1cf Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 Dec 2024 21:49:08 +0700 Subject: change ra bsp to match fsp generated directory --- .../ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h | 63 ---- .../portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 - .../fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 - .../portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 387 --------------------- .../ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h | 37 -- .../portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 63 ++++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 387 +++++++++++++++++++++ .../portenta_c33/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + .../ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h | 37 ++ hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h | 62 ---- .../ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 - .../ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 - .../ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 84 ----- hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h | 17 - .../boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 62 ++++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 84 +++++ .../boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h | 17 + hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h | 35 -- .../ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 - .../ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 - .../ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 78 ----- hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h | 21 -- .../boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 35 ++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 78 +++++ .../boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h | 21 ++ hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h | 63 ---- .../ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 - .../ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 - .../ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 386 -------------------- hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h | 25 -- .../boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 63 ++++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 386 ++++++++++++++++++++ .../boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h | 25 ++ hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h | 68 ---- .../ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 - .../ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 - .../ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 84 ----- hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h | 23 -- .../boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 68 ++++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 84 +++++ .../boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + hw/bsp/ra/boards/ra6m1_ek/ra_gen/bsp_clock_cfg.h | 23 ++ hw/bsp/ra/boards/ra6m5_ek/board.cmake | 1 + hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h | 63 ---- .../ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 - .../ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 - .../ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 387 --------------------- hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h | 37 -- .../boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 63 ++++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 387 +++++++++++++++++++++ .../boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + hw/bsp/ra/boards/ra6m5_ek/ra_gen/bsp_clock_cfg.h | 37 ++ hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h | 35 -- .../boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 - .../uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 - .../boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 87 ----- hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h | 21 -- .../ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 35 ++ .../uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 87 +++++ .../ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h | 21 ++ hw/bsp/ra/family.cmake | 5 +- hw/bsp/ra/r_ioport_cfg.h | 7 - 80 files changed, 2270 insertions(+), 2184 deletions(-) delete mode 100644 hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h delete mode 100644 hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h delete mode 100644 hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h delete mode 100644 hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h delete mode 100644 hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h delete mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h delete mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h delete mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h delete mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h delete mode 100644 hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h delete mode 100644 hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_gen/bsp_clock_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h delete mode 100644 hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_gen/bsp_clock_cfg.h delete mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h delete mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h delete mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h delete mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h delete mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h delete mode 100644 hw/bsp/ra/r_ioport_cfg.h (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 33d381850..000000000 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,63 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h deleted file mode 100644 index bd6a901c3..000000000 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ /dev/null @@ -1,5 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_CFG_H_ -#define BSP_MCU_DEVICE_CFG_H_ -#define BSP_CFG_MCU_PART_SERIES (6) -#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 6845183db..000000000 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA6M5BH3CFC -#define BSP_MCU_FEATURE_SET ('B') -#define BSP_ROM_SIZE_BYTES (2097152) -#define BSP_RAM_SIZE_BYTES (524288) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (176) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index d5428540f..000000000 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,387 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M5 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif - -#define BSP_CFG_FLL_ENABLE (0) - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) - -#if defined(_RA_TZ_SECURE) - #define BSP_TZ_SECURE_BUILD (1) - #define BSP_TZ_NONSECURE_BUILD (0) - #elif defined(_RA_TZ_NONSECURE) - #define BSP_TZ_SECURE_BUILD (0) - #define BSP_TZ_NONSECURE_BUILD (1) - #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) - -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) -#ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) -#endif - -#ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) -#endif -#define FPU_FPCCR_CLRONRETS_VAL (1) - -#ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) -#endif - -/* The C-Cache line size that is configured during startup. */ -#ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) -#endif - -/* Type 1 Peripheral Security Attribution */ - -/* Peripheral Security Attribution Register (PSAR) Settings */ -#ifndef BSP_TZ_CFG_PSARB -#define BSP_TZ_CFG_PSARB (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ - 0x33f4f9) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARC -#define BSP_TZ_CFG_PSARC (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ - 0x7fffcef4) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARD -#define BSP_TZ_CFG_PSARD (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ - 0xffae07f0) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARE -#define BSP_TZ_CFG_PSARE (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ - 0x3f3ff8) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_MSSAR -#define BSP_TZ_CFG_MSSAR (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ - 0xfffffffc) /* Unused */ -#endif - -/* Type 2 Peripheral Security Attribution */ - -/* Security attribution for Cache registers. */ -#ifndef BSP_TZ_CFG_CSAR -#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) -#endif - -/* Security attribution for RSTSRn registers. */ -#ifndef BSP_TZ_CFG_RSTSAR -#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) -#endif - -/* Security attribution for registers of LVD channels. */ -#ifndef BSP_TZ_CFG_LVDSAR -#define BSP_TZ_CFG_LVDSAR (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ - 0xFFFFFFFCU) -#endif - -/* Security attribution for LPM registers. */ -#ifndef BSP_TZ_CFG_LPMSAR -#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) -#endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ -#ifndef BSP_TZ_CFG_DPFSAR -#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) -#endif - -/* Security attribution for CGC registers. */ -#ifndef BSP_TZ_CFG_CGFSAR -#if BSP_CFG_CLOCKS_SECURE -/* Protect all CGC registers from Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) -#endif -#endif - -/* Security attribution for Battery Backup registers. */ -#ifndef BSP_TZ_CFG_BBFSAR -#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) -#endif - -/* Security attribution for registers for IRQ channels. */ -#ifndef BSP_TZ_CFG_ICUSARA -#define BSP_TZ_CFG_ICUSARA (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ - 0xFFFF0000U) -#endif - -/* Security attribution for NMI registers. */ -#ifndef BSP_TZ_CFG_ICUSARB -#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ -#endif - -/* Security attribution for registers for DMAC channels */ -#ifndef BSP_TZ_CFG_ICUSARC -#define BSP_TZ_CFG_ICUSARC (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ - 0xFFFFFF00U) -#endif - -/* Security attribution registers for SELSR0. */ -#ifndef BSP_TZ_CFG_ICUSARD -#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) -#endif - -/* Security attribution registers for WUPEN0. */ -#ifndef BSP_TZ_CFG_ICUSARE -#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) -#endif - -/* Security attribution registers for WUPEN1. */ -#ifndef BSP_TZ_CFG_ICUSARF -#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) -#endif - -/* Set DTCSTSAR if the Secure program uses the DTC. */ -#if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) -#else - #define BSP_TZ_CFG_DTC_USED (1U) -#endif - -/* Security attribution of FLWT and FCKMHZ registers. */ -#ifndef BSP_TZ_CFG_FSAR -/* If the CGC registers are only accessible in Secure mode, than there is no - * reason for nonsecure applications to access FLWT and FCKMHZ. */ -#if BSP_CFG_CLOCKS_SECURE -/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ -#define BSP_TZ_CFG_FSAR (0xFEFEU) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_FSAR (0xFFFFU) -#endif -#endif - -/* Security attribution for SRAM registers. */ -#ifndef BSP_TZ_CFG_SRAMSAR -/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access - * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ - 1 | \ - ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ - 4 | \ - 0xFFFFFFF8U) -#endif - -/* Security attribution for Standby RAM registers. */ -#ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) -#endif - -/* Security attribution for the DMAC Bus Master MPU settings. */ -#ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) -#endif - -/* Security Attribution Register A for BUS Control registers. */ -#ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) -#endif -/* Security Attribution Register B for BUS Control registers. */ -#ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) -#endif - -/* Enable Uninitialized Non-Secure Application Fallback. */ -#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) -#endif - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) - -/* Option Function Select Register 1 Security Attribution */ -#ifndef BSP_CFG_ROM_REG_OFS1_SEL -#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) -#else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) -#endif -#endif - -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) - -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* Dual Mode Select Register */ -#ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) -#endif - -/* Block Protection Register 0 */ -#ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) -#endif -/* Block Protection Register 1 */ -#ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) -#endif -/* Block Protection Register 2 */ -#ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) -#endif -/* Block Protection Register 3 */ -#ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) -#endif -/* Permanent Block Protection Register 0 */ -#ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) -#endif -/* Permanent Block Protection Register 1 */ -#ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) -#endif -/* Permanent Block Protection Register 2 */ -#ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) -#endif -/* Permanent Block Protection Register 3 */ -#ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) -#endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) -#endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) -#endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) -#endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) -#endif -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index 0eb5e0516..000000000 --- a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,37 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ - -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ -#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ -#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ -#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ -#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ -#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ -#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ -#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ -#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ -#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ -#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ -#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ -#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ - -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..33d381850 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,63 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (2) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) +#else + #define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x1000) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..bd6a901c3 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (6) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..6845183db --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M5BH3CFC +#define BSP_MCU_FEATURE_SET ('B') +#define BSP_ROM_SIZE_BYTES (2097152) +#define BSP_RAM_SIZE_BYTES (524288) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (176) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..d5428540f --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,387 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA6M5 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else +#define BSP_TZ_SECURE_BUILD (0) +#define BSP_TZ_NONSECURE_BUILD (0) +#endif + +/* TrustZone Settings */ +#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) +#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) +#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + +/* CMSIS TrustZone Settings */ +#define SCB_CSR_AIRCR_INIT (1) +#define SCB_AIRCR_BFHFNMINS_VAL (0) +#define SCB_AIRCR_SYSRESETREQS_VAL (1) +#define SCB_AIRCR_PRIS_VAL (0) +#define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL +#define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL +#define FPU_FPCCR_TS_VAL (1U) +#endif +#define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL +#define FPU_FPCCR_CLRONRET_VAL (1) +#endif + +/* The C-Cache line size that is configured during startup. */ +#ifndef BSP_CFG_C_CACHE_LINE_SIZE +#define BSP_CFG_C_CACHE_LINE_SIZE (1U) +#endif + +/* Type 1 Peripheral Security Attribution */ + +/* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ + 0x33f4f9) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ + 0x7fffcef4) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + 0xffae07f0) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + 0x3f3ff8) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ + 0xfffffffc) /* Unused */ +#endif + +/* Type 2 Peripheral Security Attribution */ + +/* Security attribution for Cache registers. */ +#ifndef BSP_TZ_CFG_CSAR +#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR +#define BSP_TZ_CFG_LVDSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ + 0xFFFFFFFCU) +#endif + +/* Security attribution for LPM registers. */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) +#endif +/* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) +#endif + +/* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) +#endif +#endif + +/* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) +#endif + +/* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ + 0xFFFF0000U) +#endif + +/* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ +#endif + +/* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_ICUSARC +#define BSP_TZ_CFG_ICUSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ + 0xFFFFFF00U) +#endif + +/* Security attribution registers for SELSR0. */ +#ifndef BSP_TZ_CFG_ICUSARD +#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) +#endif + +/* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED +#define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + +/* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#if BSP_CFG_CLOCKS_SECURE +/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ +#define BSP_TZ_CFG_FSAR (0xFEFEU) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_FSAR (0xFFFFU) +#endif +#endif + +/* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ +#define BSP_TZ_CFG_SRAMSAR (\ + 1 | \ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ + 4 | \ + 0xFFFFFFF8U) +#endif + +/* Security attribution for Standby RAM registers. */ +#ifndef BSP_TZ_CFG_STBRAMSAR +#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) +#endif + +/* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA +/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ +#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) +#endif + +/* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA +#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) +#endif +/* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB +#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) +#endif + +/* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK +#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + +/* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) +#else +#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) +#endif +#endif + +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL +#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) +#endif + +/* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 +#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif +/* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 +#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif +/* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 +#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) +#endif +/* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 +#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 +#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif +/* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 +#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif +/* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 +#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) +#endif +/* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 +#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 +#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif +/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 +#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif +/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 +#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) +#endif +/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 +#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..0eb5e0516 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,37 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ + +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ +#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ + +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 30637c17b..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,62 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus - extern "C" { - #endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (2) - #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) - #else -#define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) - #endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x400) -#define BSP_CFG_HEAP_BYTES (0x400) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus - } - #endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h deleted file mode 100644 index eb82f4697..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ /dev/null @@ -1,5 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_CFG_H_ -#define BSP_MCU_DEVICE_CFG_H_ -#define BSP_CFG_MCU_PART_SERIES (2) -#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 710e85b28..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA2A1AB3CFM -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (64) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index 6caef62cc..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,84 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ -#ifdef __cplusplus - extern "C" { - #endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" -#define BSP_MCU_GROUP_RA2A1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) - #elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) - #elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) - #else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" - #endif - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) - #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus - } - #endif -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index cd9d135f7..000000000 --- a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,17 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ -#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ -#define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */ -#define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..30637c17b --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else +#define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x400) +#define BSP_CFG_HEAP_BYTES (0x400) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..eb82f4697 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (2) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..710e85b28 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA2A1AB3CFM +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (64) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..6caef62cc --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" +#define BSP_MCU_GROUP_RA2A1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus + } + #endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..cd9d135f7 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */ +#define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 11d5795df..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,35 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#undef RA_NOT_DEFINED -#define BSP_CFG_RTOS (0) -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) - -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 - -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h deleted file mode 100644 index 444d32e56..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ /dev/null @@ -1,5 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_CFG_H_ -#define BSP_MCU_DEVICE_CFG_H_ -#define BSP_CFG_MCU_PART_SERIES (4) -#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index d810dabb2..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA4M1AB3CFP -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (100) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index 72cdb89e6..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,78 +0,0 @@ -/* generated configuration header file through renesas e2 studio */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA4M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 - #define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) -#elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) -#elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) - #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index 554126523..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,21 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* UCLK Src: PLL */ -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..11d5795df --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,35 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#undef RA_NOT_DEFINED +#define BSP_CFG_RTOS (0) +#if defined(_RA_BOOT_IMAGE) +#define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x800) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..444d32e56 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (4) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..d810dabb2 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M1AB3CFP +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (100) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..72cdb89e6 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,78 @@ +/* generated configuration header file through renesas e2 studio */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA4M1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) +#elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) +#elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..554126523 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,21 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ +#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* UCLK Src: PLL */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 862ec25b7..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,63 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) -#define BSP_CFG_RTOS (1) -#else -#define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x800) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h deleted file mode 100644 index 444d32e56..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ /dev/null @@ -1,5 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_CFG_H_ -#define BSP_MCU_DEVICE_CFG_H_ -#define BSP_CFG_MCU_PART_SERIES (4) -#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 1a0bc02e2..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA4M3AF3CFB -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (1048576) -#define BSP_RAM_SIZE_BYTES (131072) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (144) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index 26e184a94..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,386 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" -#define BSP_MCU_GROUP_RA4M3 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) - #elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) - #else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" - #endif - -#define BSP_CFG_FLL_ENABLE (0) - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) - -#if defined(_RA_TZ_SECURE) - #define BSP_TZ_SECURE_BUILD (1) - #define BSP_TZ_NONSECURE_BUILD (0) - #elif defined(_RA_TZ_NONSECURE) - #define BSP_TZ_SECURE_BUILD (0) - #define BSP_TZ_NONSECURE_BUILD (1) - #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) - -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) -#ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) -#endif - -#ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) -#endif -#define FPU_FPCCR_CLRONRETS_VAL (1) - -#ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) -#endif - -/* The C-Cache line size that is configured during startup. */ -#ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) -#endif - -/* Type 1 Peripheral Security Attribution */ - -/* Peripheral Security Attribution Register (PSAR) Settings */ -#ifndef BSP_TZ_CFG_PSARB -#define BSP_TZ_CFG_PSARB (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ - 0x33f4f9) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARC -#define BSP_TZ_CFG_PSARC (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ - 0x7fffcef4) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARD -#define BSP_TZ_CFG_PSARD (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ - (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ - 0xffae07f0) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARE -#define BSP_TZ_CFG_PSARE (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ - (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ - (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ - (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ - (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ - 0x3f3ff8) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_MSSAR -#define BSP_TZ_CFG_MSSAR (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ - 0xfffffffc) /* Unused */ -#endif - -/* Type 2 Peripheral Security Attribution */ - -/* Security attribution for Cache registers. */ -#ifndef BSP_TZ_CFG_CSAR -#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) -#endif - -/* Security attribution for RSTSRn registers. */ -#ifndef BSP_TZ_CFG_RSTSAR -#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) -#endif - -/* Security attribution for registers of LVD channels. */ -#ifndef BSP_TZ_CFG_LVDSAR -#define BSP_TZ_CFG_LVDSAR (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ - 0xFFFFFFFCU) -#endif - -/* Security attribution for LPM registers. */ -#ifndef BSP_TZ_CFG_LPMSAR -#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) -#endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ -#ifndef BSP_TZ_CFG_DPFSAR -#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) -#endif - -/* Security attribution for CGC registers. */ -#ifndef BSP_TZ_CFG_CGFSAR -#if BSP_CFG_CLOCKS_SECURE -/* Protect all CGC registers from Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) -#endif -#endif - -/* Security attribution for Battery Backup registers. */ -#ifndef BSP_TZ_CFG_BBFSAR -#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) -#endif - -/* Security attribution for registers for IRQ channels. */ -#ifndef BSP_TZ_CFG_ICUSARA -#define BSP_TZ_CFG_ICUSARA (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ - (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ - (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ - 0xFFFF0000U) -#endif - -/* Security attribution for NMI registers. */ -#ifndef BSP_TZ_CFG_ICUSARB -#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ -#endif - -/* Security attribution for registers for DMAC channels */ -#ifndef BSP_TZ_CFG_ICUSARC -#define BSP_TZ_CFG_ICUSARC (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ - 0xFFFFFF00U) -#endif - -/* Security attribution registers for SELSR0. */ -#ifndef BSP_TZ_CFG_ICUSARD -#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) -#endif - -/* Security attribution registers for WUPEN0. */ -#ifndef BSP_TZ_CFG_ICUSARE -#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) -#endif - -/* Security attribution registers for WUPEN1. */ -#ifndef BSP_TZ_CFG_ICUSARF -#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) -#endif - -/* Set DTCSTSAR if the Secure program uses the DTC. */ -#if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) -#else - #define BSP_TZ_CFG_DTC_USED (1U) -#endif - -/* Security attribution of FLWT and FCKMHZ registers. */ -#ifndef BSP_TZ_CFG_FSAR -/* If the CGC registers are only accessible in Secure mode, than there is no - * reason for nonsecure applications to access FLWT and FCKMHZ. */ -#if BSP_CFG_CLOCKS_SECURE -/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ -#define BSP_TZ_CFG_FSAR (0xFEFEU) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_FSAR (0xFFFFU) -#endif -#endif - -/* Security attribution for SRAM registers. */ -#ifndef BSP_TZ_CFG_SRAMSAR -/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access - * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ - 1 | \ - ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ - 4 | \ - 0xFFFFFFF8U) -#endif - -/* Security attribution for Standby RAM registers. */ -#ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) -#endif - -/* Security attribution for the DMAC Bus Master MPU settings. */ -#ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) -#endif - -/* Security Attribution Register A for BUS Control registers. */ -#ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) -#endif -/* Security Attribution Register B for BUS Control registers. */ -#ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) -#endif - -/* Enable Uninitialized Non-Secure Application Fallback. */ -#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) -#endif - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) - -/* Option Function Select Register 1 Security Attribution */ -#ifndef BSP_CFG_ROM_REG_OFS1_SEL -#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) -#else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) -#endif -#endif - -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) - -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* Dual Mode Select Register */ -#ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) -#endif - -/* Block Protection Register 0 */ -#ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) -#endif -/* Block Protection Register 1 */ -#ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) -#endif -/* Block Protection Register 2 */ -#ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) -#endif -/* Block Protection Register 3 */ -#ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) -#endif -/* Permanent Block Protection Register 0 */ -#ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) -#endif -/* Permanent Block Protection Register 1 */ -#ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) -#endif -/* Permanent Block Protection Register 2 */ -#ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) -#endif -/* Permanent Block Protection Register 3 */ -#ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) -#endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) -#endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) -#endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) -#endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU) -#endif -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index 80641945d..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,25 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ -#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL Mul x24.0 */ -#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */ -#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL2 Mul x24.0 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */ -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..862ec25b7 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,63 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) +#define BSP_CFG_RTOS (1) +#else +#define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) +#define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x800) +#define BSP_CFG_HEAP_BYTES (0x800) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..444d32e56 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (4) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..1a0bc02e2 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M3AF3CFB +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (1048576) +#define BSP_RAM_SIZE_BYTES (131072) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (144) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..26e184a94 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,386 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" +#define BSP_MCU_GROUP_RA4M3 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else +#define BSP_TZ_SECURE_BUILD (0) +#define BSP_TZ_NONSECURE_BUILD (0) +#endif + +/* TrustZone Settings */ +#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) +#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) +#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + +/* CMSIS TrustZone Settings */ +#define SCB_CSR_AIRCR_INIT (1) +#define SCB_AIRCR_BFHFNMINS_VAL (0) +#define SCB_AIRCR_SYSRESETREQS_VAL (1) +#define SCB_AIRCR_PRIS_VAL (0) +#define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL +#define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL +#define FPU_FPCCR_TS_VAL (1U) +#endif +#define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL +#define FPU_FPCCR_CLRONRET_VAL (1) +#endif + +/* The C-Cache line size that is configured during startup. */ +#ifndef BSP_CFG_C_CACHE_LINE_SIZE +#define BSP_CFG_C_CACHE_LINE_SIZE (1U) +#endif + +/* Type 1 Peripheral Security Attribution */ + +/* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ + 0x33f4f9) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ + 0x7fffcef4) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ + (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + 0xffae07f0) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + 0x3f3ff8) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ + 0xfffffffc) /* Unused */ +#endif + +/* Type 2 Peripheral Security Attribution */ + +/* Security attribution for Cache registers. */ +#ifndef BSP_TZ_CFG_CSAR +#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR +#define BSP_TZ_CFG_LVDSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ + 0xFFFFFFFCU) +#endif + +/* Security attribution for LPM registers. */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) +#endif +/* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) +#endif + +/* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) +#endif +#endif + +/* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) +#endif + +/* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ + 0xFFFF0000U) +#endif + +/* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ +#endif + +/* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_ICUSARC +#define BSP_TZ_CFG_ICUSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ + 0xFFFFFF00U) +#endif + +/* Security attribution registers for SELSR0. */ +#ifndef BSP_TZ_CFG_ICUSARD +#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) +#endif + +/* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED +#define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + +/* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#if BSP_CFG_CLOCKS_SECURE +/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ +#define BSP_TZ_CFG_FSAR (0xFEFEU) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_FSAR (0xFFFFU) +#endif +#endif + +/* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ +#define BSP_TZ_CFG_SRAMSAR (\ + 1 | \ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ + 4 | \ + 0xFFFFFFF8U) +#endif + +/* Security attribution for Standby RAM registers. */ +#ifndef BSP_TZ_CFG_STBRAMSAR +#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) +#endif + +/* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA +/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ +#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) +#endif + +/* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA +#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) +#endif +/* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB +#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) +#endif + +/* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK +#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + +/* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) +#else +#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) +#endif +#endif + +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL +#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) +#endif + +/* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 +#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif +/* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 +#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif +/* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 +#define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) +#endif +/* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 +#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 +#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif +/* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 +#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif +/* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 +#define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 +#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 +#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif +/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 +#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif +/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 +#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 +#define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..80641945d --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,25 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL Mul x24.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL2 Mul x24.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 772e5e5b1..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,68 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif - -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif - -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif - -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h deleted file mode 100644 index bd6a901c3..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ /dev/null @@ -1,5 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_CFG_H_ -#define BSP_MCU_DEVICE_CFG_H_ -#define BSP_CFG_MCU_PART_SERIES (6) -#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 40bb3a3bf..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA6M1AD3CFP -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (524288) -#define BSP_RAM_SIZE_BYTES (262144) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (100) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index 5fedd754f..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,84 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif - -#define BSP_CFG_FLL_ENABLE (0) - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) -#else - /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ - #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index 945a6010b..000000000 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,23 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_1) /* PLL Div /1 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL Mul x20.0 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ -#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..772e5e5b1 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,68 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (2) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) +#else + #define BSP_CFG_RTOS (0) +#endif +#endif + +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif + +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) +#endif + +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x1000) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..bd6a901c3 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (6) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..40bb3a3bf --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M1AD3CFP +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (524288) +#define BSP_RAM_SIZE_BYTES (262144) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (100) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..5fedd754f --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA6M1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) +#else + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..945a6010b --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,23 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_1) /* PLL Div /1 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index c91d48a32..2adf6e744 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -2,6 +2,7 @@ set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) +set(JLINK_OPTION "-USB 000831915224") # Device port default to PORT1 Highspeed if (NOT DEFINED PORT) diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index 33d381850..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,63 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h deleted file mode 100644 index bd6a901c3..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ /dev/null @@ -1,5 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_CFG_H_ -#define BSP_MCU_DEVICE_CFG_H_ -#define BSP_CFG_MCU_PART_SERIES (6) -#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 6845183db..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA6M5BH3CFC -#define BSP_MCU_FEATURE_SET ('B') -#define BSP_ROM_SIZE_BYTES (2097152) -#define BSP_RAM_SIZE_BYTES (524288) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (176) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index d5428540f..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,387 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M5 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif - -#define BSP_CFG_FLL_ENABLE (0) - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) - -#if defined(_RA_TZ_SECURE) - #define BSP_TZ_SECURE_BUILD (1) - #define BSP_TZ_NONSECURE_BUILD (0) - #elif defined(_RA_TZ_NONSECURE) - #define BSP_TZ_SECURE_BUILD (0) - #define BSP_TZ_NONSECURE_BUILD (1) - #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) - -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) -#ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) -#endif - -#ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) -#endif -#define FPU_FPCCR_CLRONRETS_VAL (1) - -#ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) -#endif - -/* The C-Cache line size that is configured during startup. */ -#ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) -#endif - -/* Type 1 Peripheral Security Attribution */ - -/* Peripheral Security Attribution Register (PSAR) Settings */ -#ifndef BSP_TZ_CFG_PSARB -#define BSP_TZ_CFG_PSARB (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ - 0x33f4f9) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARC -#define BSP_TZ_CFG_PSARC (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ - 0x7fffcef4) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARD -#define BSP_TZ_CFG_PSARD (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ - 0xffae07f0) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_PSARE -#define BSP_TZ_CFG_PSARE (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ - 0x3f3ff8) /* Unused */ -#endif -#ifndef BSP_TZ_CFG_MSSAR -#define BSP_TZ_CFG_MSSAR (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ - 0xfffffffc) /* Unused */ -#endif - -/* Type 2 Peripheral Security Attribution */ - -/* Security attribution for Cache registers. */ -#ifndef BSP_TZ_CFG_CSAR -#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) -#endif - -/* Security attribution for RSTSRn registers. */ -#ifndef BSP_TZ_CFG_RSTSAR -#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) -#endif - -/* Security attribution for registers of LVD channels. */ -#ifndef BSP_TZ_CFG_LVDSAR -#define BSP_TZ_CFG_LVDSAR (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ - 0xFFFFFFFCU) -#endif - -/* Security attribution for LPM registers. */ -#ifndef BSP_TZ_CFG_LPMSAR -#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) -#endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ -#ifndef BSP_TZ_CFG_DPFSAR -#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) -#endif - -/* Security attribution for CGC registers. */ -#ifndef BSP_TZ_CFG_CGFSAR -#if BSP_CFG_CLOCKS_SECURE -/* Protect all CGC registers from Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) -#endif -#endif - -/* Security attribution for Battery Backup registers. */ -#ifndef BSP_TZ_CFG_BBFSAR -#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) -#endif - -/* Security attribution for registers for IRQ channels. */ -#ifndef BSP_TZ_CFG_ICUSARA -#define BSP_TZ_CFG_ICUSARA (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ - 0xFFFF0000U) -#endif - -/* Security attribution for NMI registers. */ -#ifndef BSP_TZ_CFG_ICUSARB -#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ -#endif - -/* Security attribution for registers for DMAC channels */ -#ifndef BSP_TZ_CFG_ICUSARC -#define BSP_TZ_CFG_ICUSARC (\ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ - 0xFFFFFF00U) -#endif - -/* Security attribution registers for SELSR0. */ -#ifndef BSP_TZ_CFG_ICUSARD -#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) -#endif - -/* Security attribution registers for WUPEN0. */ -#ifndef BSP_TZ_CFG_ICUSARE -#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) -#endif - -/* Security attribution registers for WUPEN1. */ -#ifndef BSP_TZ_CFG_ICUSARF -#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) -#endif - -/* Set DTCSTSAR if the Secure program uses the DTC. */ -#if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) -#else - #define BSP_TZ_CFG_DTC_USED (1U) -#endif - -/* Security attribution of FLWT and FCKMHZ registers. */ -#ifndef BSP_TZ_CFG_FSAR -/* If the CGC registers are only accessible in Secure mode, than there is no - * reason for nonsecure applications to access FLWT and FCKMHZ. */ -#if BSP_CFG_CLOCKS_SECURE -/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ -#define BSP_TZ_CFG_FSAR (0xFEFEU) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_FSAR (0xFFFFU) -#endif -#endif - -/* Security attribution for SRAM registers. */ -#ifndef BSP_TZ_CFG_SRAMSAR -/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access - * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ - 1 | \ - ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ - 4 | \ - 0xFFFFFFF8U) -#endif - -/* Security attribution for Standby RAM registers. */ -#ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) -#endif - -/* Security attribution for the DMAC Bus Master MPU settings. */ -#ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) -#endif - -/* Security Attribution Register A for BUS Control registers. */ -#ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) -#endif -/* Security Attribution Register B for BUS Control registers. */ -#ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) -#endif - -/* Enable Uninitialized Non-Secure Application Fallback. */ -#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) -#endif - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) - -/* Option Function Select Register 1 Security Attribution */ -#ifndef BSP_CFG_ROM_REG_OFS1_SEL -#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) -#else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) -#endif -#endif - -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) - -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* Dual Mode Select Register */ -#ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) -#endif - -/* Block Protection Register 0 */ -#ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) -#endif -/* Block Protection Register 1 */ -#ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) -#endif -/* Block Protection Register 2 */ -#ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) -#endif -/* Block Protection Register 3 */ -#ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) -#endif -/* Permanent Block Protection Register 0 */ -#ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) -#endif -/* Permanent Block Protection Register 1 */ -#ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) -#endif -/* Permanent Block Protection Register 2 */ -#ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) -#endif -/* Permanent Block Protection Register 3 */ -#ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) -#endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) -#endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) -#endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) -#endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ -#ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) -#endif -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif - -#ifdef __cplusplus -} -#endif -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index 0eb5e0516..000000000 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,37 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ - -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ -#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ -#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ -#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ -#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ -#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ -#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ -#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ -#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ -#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ -#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ -#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ -#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ - -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..33d381850 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,63 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (2) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) +#else + #define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x1000) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..bd6a901c3 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (6) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..6845183db --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M5BH3CFC +#define BSP_MCU_FEATURE_SET ('B') +#define BSP_ROM_SIZE_BYTES (2097152) +#define BSP_RAM_SIZE_BYTES (524288) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (176) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..d5428540f --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,387 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA6M5 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else +#define BSP_TZ_SECURE_BUILD (0) +#define BSP_TZ_NONSECURE_BUILD (0) +#endif + +/* TrustZone Settings */ +#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) +#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) +#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + +/* CMSIS TrustZone Settings */ +#define SCB_CSR_AIRCR_INIT (1) +#define SCB_AIRCR_BFHFNMINS_VAL (0) +#define SCB_AIRCR_SYSRESETREQS_VAL (1) +#define SCB_AIRCR_PRIS_VAL (0) +#define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL +#define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL +#define FPU_FPCCR_TS_VAL (1U) +#endif +#define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL +#define FPU_FPCCR_CLRONRET_VAL (1) +#endif + +/* The C-Cache line size that is configured during startup. */ +#ifndef BSP_CFG_C_CACHE_LINE_SIZE +#define BSP_CFG_C_CACHE_LINE_SIZE (1U) +#endif + +/* Type 1 Peripheral Security Attribution */ + +/* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ + 0x33f4f9) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ + 0x7fffcef4) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + 0xffae07f0) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + 0x3f3ff8) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ + 0xfffffffc) /* Unused */ +#endif + +/* Type 2 Peripheral Security Attribution */ + +/* Security attribution for Cache registers. */ +#ifndef BSP_TZ_CFG_CSAR +#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR +#define BSP_TZ_CFG_LVDSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ + 0xFFFFFFFCU) +#endif + +/* Security attribution for LPM registers. */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) +#endif +/* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) +#endif + +/* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) +#endif +#endif + +/* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) +#endif + +/* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ + 0xFFFF0000U) +#endif + +/* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ +#endif + +/* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_ICUSARC +#define BSP_TZ_CFG_ICUSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ + 0xFFFFFF00U) +#endif + +/* Security attribution registers for SELSR0. */ +#ifndef BSP_TZ_CFG_ICUSARD +#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) +#endif + +/* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED +#define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + +/* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#if BSP_CFG_CLOCKS_SECURE +/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ +#define BSP_TZ_CFG_FSAR (0xFEFEU) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_FSAR (0xFFFFU) +#endif +#endif + +/* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ +#define BSP_TZ_CFG_SRAMSAR (\ + 1 | \ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ + 4 | \ + 0xFFFFFFF8U) +#endif + +/* Security attribution for Standby RAM registers. */ +#ifndef BSP_TZ_CFG_STBRAMSAR +#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) +#endif + +/* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA +/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ +#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) +#endif + +/* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA +#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) +#endif +/* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB +#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) +#endif + +/* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK +#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + +/* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) +#else +#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) +#endif +#endif + +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL +#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) +#endif + +/* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 +#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif +/* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 +#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif +/* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 +#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) +#endif +/* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 +#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 +#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif +/* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 +#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif +/* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 +#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) +#endif +/* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 +#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 +#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif +/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 +#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif +/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 +#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) +#endif +/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 +#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..0eb5e0516 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,37 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ + +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ +#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ + +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h deleted file mode 100644 index c1d1022cc..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h +++ /dev/null @@ -1,35 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CFG_H_ -#define BSP_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#undef RA_NOT_DEFINED -#define BSP_CFG_RTOS (0) -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) - -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 - -#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h deleted file mode 100644 index 444d32e56..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h +++ /dev/null @@ -1,5 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_CFG_H_ -#define BSP_MCU_DEVICE_CFG_H_ -#define BSP_CFG_MCU_PART_SERIES (4) -#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h deleted file mode 100644 index 336918800..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ /dev/null @@ -1,11 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_DEVICE_PN_CFG_H_ -#define BSP_MCU_R7FA4M1AB3CNE -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_QFN -#define BSP_PACKAGE_PINS (48) -#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h deleted file mode 100644 index fc604eb3b..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,87 +0,0 @@ -/* generated configuration header file through renesas e2 studio */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA4M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 - #define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) -#elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) -#elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) -#define BSP_MCU_VBATT_SUPPORT (1) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) - -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) - #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h deleted file mode 100644 index 63618ec4b..000000000 --- a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h +++ /dev/null @@ -1,21 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef BSP_CLOCK_CFG_H_ -#define BSP_CLOCK_CFG_H_ -#define BSP_CFG_CLOCKS_SECURE (0) -#define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */ -#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */ -#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..c1d1022cc --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,35 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#undef RA_NOT_DEFINED +#define BSP_CFG_RTOS (0) +#if defined(_RA_BOOT_IMAGE) +#define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x800) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) + +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..444d32e56 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (4) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..336918800 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M1AB3CNE +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_QFN +#define BSP_PACKAGE_PINS (48) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..fc604eb3b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,87 @@ +/* generated configuration header file through renesas e2 studio */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA4M1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) +#elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) +#elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) +#define BSP_MCU_VBATT_SUPPORT (1) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..63618ec4b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,21 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */ +#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 426e1ca8f..3b35d2e71 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -44,8 +44,9 @@ function(add_board_target BOARD_TARGET) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg/bsp + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_cfg/fsp_cfg/bsp + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen ${CMSIS_DIR}/CMSIS/Core/Include ${FSP_RA}/inc ${FSP_RA}/inc/api diff --git a/hw/bsp/ra/r_ioport_cfg.h b/hw/bsp/ra/r_ioport_cfg.h deleted file mode 100644 index cb7c07932..000000000 --- a/hw/bsp/ra/r_ioport_cfg.h +++ /dev/null @@ -1,7 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef R_IOPORT_CFG_H_ -#define R_IOPORT_CFG_H_ - -#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) - -#endif /* R_IOPORT_CFG_H_ */ -- cgit v1.3.1 From 69dd473a4c7d745bc1b535024b3ed89d2c922dcd Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Dec 2024 12:39:34 +0700 Subject: more migrate to ra smart configurator --- .idea/cmake.xml | 5 +- hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld | 22 + .../ra6m1_ek/smart_configurator/configuration.xml | 299 ++++++++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 235 +++---- hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld | 22 + .../ra6m5_ek/smart_configurator/configuration.xml | 651 +++++++++++++++++ .../ra8m1_ek/smart_configurator/configuration.xml | 624 +++++++++++++++++ hw/bsp/ra/boards/uno_r4/board.cmake | 4 - .../ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 89 ++- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 145 ++-- hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h | 6 +- hw/bsp/ra/boards/uno_r4/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/uno_r4/script/memory_regions.ld | 25 + .../uno_r4/smart_configurator/configuration.xml | 205 ++++++ hw/bsp/ra/boards/uno_r4/uno_r4.ld | 25 - hw/bsp/ra/family.cmake | 13 +- tools/get_deps.py | 9 +- 20 files changed, 4420 insertions(+), 269 deletions(-) create mode 100644 hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml create mode 100644 hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml create mode 100644 hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml create mode 100644 hw/bsp/ra/boards/uno_r4/script/fsp.ld create mode 100644 hw/bsp/ra/boards/uno_r4/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml delete mode 100644 hw/bsp/ra/boards/uno_r4/uno_r4.ld (limited to 'hw/bsp/ra') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 5af6d7722..6e58f040c 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -118,9 +118,10 @@ - - + + + diff --git a/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld new file mode 100644 index 000000000..9d973c737 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x1FFE0000; + RAM_LENGTH = 0x40000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x80000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x0100A150; + ID_CODE_LENGTH = 0x10; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..2f373930c --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,299 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA6M1-EK Board Support Files + Renesas.RA_board_ra6m1_ek.5.6.0.pack + + + Board support package for R7FA6M1AD3CFP + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + Board support package for RA6M1 + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + Board support package for RA6M1 - FSP Data + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + Board support package for RA6M1 - Events + Renesas.RA_mcu_ra6m1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index d5428540f..c01219377 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,80 +5,80 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M5 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA6M5 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#if defined(_RA_TZ_SECURE) + #if defined(_RA_TZ_SECURE) #define BSP_TZ_SECURE_BUILD (1) #define BSP_TZ_NONSECURE_BUILD (0) #elif defined(_RA_TZ_NONSECURE) #define BSP_TZ_SECURE_BUILD (0) #define BSP_TZ_NONSECURE_BUILD (1) #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) - -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif + + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) #ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) + #define SCB_NSACR_CP10_11_VAL (3U) #endif #ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) + #define FPU_FPCCR_TS_VAL (1U) #endif -#define FPU_FPCCR_CLRONRETS_VAL (1) + #define FPU_FPCCR_CLRONRETS_VAL (1) #ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) + #define FPU_FPCCR_CLRONRET_VAL (1) #endif -/* The C-Cache line size that is configured during startup. */ + /* The C-Cache line size that is configured during startup. */ #ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) + #define BSP_CFG_C_CACHE_LINE_SIZE (1U) #endif -/* Type 1 Peripheral Security Attribution */ + /* Type 1 Peripheral Security Attribution */ -/* Peripheral Security Attribution Register (PSAR) Settings */ + /* Peripheral Security Attribution Register (PSAR) Settings */ #ifndef BSP_TZ_CFG_PSARB #define BSP_TZ_CFG_PSARB (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ @@ -146,19 +146,19 @@ extern "C" { 0xfffffffc) /* Unused */ #endif -/* Type 2 Peripheral Security Attribution */ + /* Type 2 Peripheral Security Attribution */ -/* Security attribution for Cache registers. */ + /* Security attribution for Cache registers. */ #ifndef BSP_TZ_CFG_CSAR #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) #endif -/* Security attribution for RSTSRn registers. */ + /* Security attribution for RSTSRn registers. */ #ifndef BSP_TZ_CFG_RSTSAR #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) #endif -/* Security attribution for registers of LVD channels. */ + /* Security attribution for registers of LVD channels. */ #ifndef BSP_TZ_CFG_LVDSAR #define BSP_TZ_CFG_LVDSAR (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ @@ -166,16 +166,16 @@ extern "C" { 0xFFFFFFFCU) #endif -/* Security attribution for LPM registers. */ + /* Security attribution for LPM registers. */ #ifndef BSP_TZ_CFG_LPMSAR #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) #endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ + /* Deep Standby Interrupt Factor Security Attribution Register. */ #ifndef BSP_TZ_CFG_DPFSAR #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) #endif -/* Security attribution for CGC registers. */ + /* Security attribution for CGC registers. */ #ifndef BSP_TZ_CFG_CGFSAR #if BSP_CFG_CLOCKS_SECURE /* Protect all CGC registers from Non-secure write access. */ @@ -186,12 +186,12 @@ extern "C" { #endif #endif -/* Security attribution for Battery Backup registers. */ + /* Security attribution for Battery Backup registers. */ #ifndef BSP_TZ_CFG_BBFSAR #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) #endif -/* Security attribution for registers for IRQ channels. */ + /* Security attribution for registers for IRQ channels. */ #ifndef BSP_TZ_CFG_ICUSARA #define BSP_TZ_CFG_ICUSARA (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ @@ -213,12 +213,12 @@ extern "C" { 0xFFFF0000U) #endif -/* Security attribution for NMI registers. */ + /* Security attribution for NMI registers. */ #ifndef BSP_TZ_CFG_ICUSARB #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ #endif -/* Security attribution for registers for DMAC channels */ + /* Security attribution for registers for DMAC channels */ #ifndef BSP_TZ_CFG_ICUSARC #define BSP_TZ_CFG_ICUSARC (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ @@ -232,29 +232,29 @@ extern "C" { 0xFFFFFF00U) #endif -/* Security attribution registers for SELSR0. */ + /* Security attribution registers for SELSR0. */ #ifndef BSP_TZ_CFG_ICUSARD #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN0. */ + /* Security attribution registers for WUPEN0. */ #ifndef BSP_TZ_CFG_ICUSARE #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN1. */ + /* Security attribution registers for WUPEN1. */ #ifndef BSP_TZ_CFG_ICUSARF #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) #endif -/* Set DTCSTSAR if the Secure program uses the DTC. */ + /* Set DTCSTSAR if the Secure program uses the DTC. */ #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) + #define BSP_TZ_CFG_DTC_USED (0U) #else #define BSP_TZ_CFG_DTC_USED (1U) #endif -/* Security attribution of FLWT and FCKMHZ registers. */ + /* Security attribution of FLWT and FCKMHZ registers. */ #ifndef BSP_TZ_CFG_FSAR /* If the CGC registers are only accessible in Secure mode, than there is no * reason for nonsecure applications to access FLWT and FCKMHZ. */ @@ -267,118 +267,123 @@ extern "C" { #endif #endif -/* Security attribution for SRAM registers. */ + /* Security attribution for SRAM registers. */ #ifndef BSP_TZ_CFG_SRAMSAR /* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ + #define BSP_TZ_CFG_SRAMSAR (\ 1 | \ ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ 4 | \ 0xFFFFFFF8U) #endif -/* Security attribution for Standby RAM registers. */ + /* Security attribution for Standby RAM registers. */ #ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) + #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) #endif -/* Security attribution for the DMAC Bus Master MPU settings. */ + /* Security attribution for the DMAC Bus Master MPU settings. */ #ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) #endif -/* Security Attribution Register A for BUS Control registers. */ + /* Security Attribution Register A for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) #endif -/* Security Attribution Register B for BUS Control registers. */ + /* Security Attribution Register B for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) #endif -/* Enable Uninitialized Non-Secure Application Fallback. */ + /* Enable Uninitialized Non-Secure Application Fallback. */ #ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) #endif -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -/* Option Function Select Register 1 Security Attribution */ + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + /* Option Function Select Register 1 Security Attribution */ #ifndef BSP_CFG_ROM_REG_OFS1_SEL #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((0U << 0U)) | ((0U << 2U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U)) #else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) #endif #endif -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* Dual Mode Select Register */ + /* Dual Mode Select Register */ #ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) #endif -/* Block Protection Register 0 */ + /* Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) #endif -/* Block Protection Register 1 */ + /* Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) #endif -/* Block Protection Register 2 */ + /* Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS2 (~( 0U)) #endif -/* Block Protection Register 3 */ + /* Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 0 */ + /* Permanent Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) #endif -/* Permanent Block Protection Register 1 */ + /* Permanent Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) #endif -/* Permanent Block Protection Register 2 */ + /* Permanent Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) #endif -/* Permanent Block Protection Register 3 */ + /* Permanent Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) #endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) #endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) + #define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) #endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) + #define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif + /* Security Attribution for Bank Select Register */ +#ifndef BSP_CFG_ROM_REG_BANKSEL_SEL + #define BSP_CFG_ROM_REG_BANKSEL_SEL (0xFFFFFFFFU) #endif #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) #endif #ifdef __cplusplus diff --git a/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld new file mode 100644 index 000000000..19864683f --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x80000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x200000; + DATA_FLASH_START = 0x08000000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x0100A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0100A200; + OPTION_SETTING_S_LENGTH = 0x100; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x68000000; + OSPI_DEVICE_0_LENGTH = 0x8000000; + OSPI_DEVICE_1_START = 0x70000000; + OSPI_DEVICE_1_LENGTH = 0x10000000; diff --git a/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..f77a8ac63 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml @@ -0,0 +1,651 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA6M5-EK Board Support Files + Renesas.RA_board_ra6m5_ek.5.6.0.pack + + + Board support package for R7FA6M5BH3CFC + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 - FSP Data + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 - Events + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..0a9393769 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,624 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA8M1-EK Board Support Files + Renesas.RA_board_ra8m1_ek.5.6.0.pack + + + Board support package for R7FA8M1AHECBD + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + Board support package for RA8M1 + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + Board support package for RA8M1 - FSP Data + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + Board support package for RA8M1 - Events + Renesas.RA_mcu_ra8m1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake index 9d59bc4f7..3aa6045be 100644 --- a/hw/bsp/ra/boards/uno_r4/board.cmake +++ b/hw/bsp/ra/boards/uno_r4/board.cmake @@ -1,13 +1,9 @@ set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra4m1) - set(JLINK_DEVICE R7FA4M1AB) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CFG_EXAMPLE_VIDEO_READONLY ) -# target_sources(${TARGET} PRIVATE) -# target_include_directories(${BOARD_TARGET} PUBLIC) endfunction() diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index c1d1022cc..4eef62a0e 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -1,35 +1,62 @@ /* generated configuration header file - do not edit */ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#undef RA_NOT_DEFINED -#define BSP_CFG_RTOS (0) -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) - -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 - +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x800) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index 336918800..3f1d02b0d 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA4M1AB3CNE -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_QFN -#define BSP_PACKAGE_PINS (48) + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (262144) + #define BSP_RAM_SIZE_BYTES (32768) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_QFN + #define BSP_PACKAGE_PINS (48) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index fc604eb3b..3d482b2b6 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -1,87 +1,84 @@ -/* generated configuration header file through renesas e2 studio */ +/* generated configuration header file - do not edit */ #ifndef BSP_MCU_FAMILY_CFG_H_ #define BSP_MCU_FAMILY_CFG_H_ - #ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "bsp_mcu_info.h" -#include "bsp_clock_cfg.h" + extern "C" { + #endif -#define BSP_MCU_GROUP_RA4M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 - #define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) -#elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) -#elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) -#define BSP_MCU_VBATT_SUPPORT (1) + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra4m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA4M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) + #define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + /* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ + #if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus -} -#endif + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif + #ifdef __cplusplus + } + #endif #endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h index 63618ec4b..559000a7a 100644 --- a/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/bsp_clock_cfg.h @@ -4,10 +4,10 @@ #define BSP_CFG_CLOCKS_SECURE (0) #define BSP_CFG_CLOCKS_OVERRIDE (0) #define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: Disabled */ #define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12U,0U) /* PLL Mul x12 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ @@ -15,7 +15,7 @@ #define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ #define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ #define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ #define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ #define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/script/fsp.ld b/hw/bsp/ra/boards/uno_r4/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld b/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld new file mode 100644 index 000000000..22775395c --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/script/memory_regions.ld @@ -0,0 +1,25 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x8000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x40000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x01010018; + ID_CODE_LENGTH = 0x20; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; + +/* Uno R4 has bootloader */ +FLASH_IMAGE_START = 0x4000; diff --git a/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml new file mode 100644 index 000000000..49603d5bf --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml @@ -0,0 +1,205 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + Custom Board Support Files + Renesas.RA_board_custom.5.6.0.pack + + + Board support package for R7FA4M1AB3CNE + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 - FSP Data + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 - Events + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/uno_r4/uno_r4.ld b/hw/bsp/ra/boards/uno_r4/uno_r4.ld deleted file mode 100644 index 45f11dfb1..000000000 --- a/hw/bsp/ra/boards/uno_r4/uno_r4.ld +++ /dev/null @@ -1,25 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -/* Uno R4 has bootloader */ -FLASH_IMAGE_START = 0x4000; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 3b35d2e71..00907c598 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -4,7 +4,7 @@ if (NOT BOARD) message(FATAL_ERROR "BOARD not specified") endif () -set(CMSIS_DIR ${TOP}/lib/CMSIS_5) +set(CMSIS_DIR ${TOP}/lib/CMSIS_6) set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp) # include board specific @@ -59,18 +59,19 @@ function(add_board_target BOARD_TARGET) update_board(${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script/fsp.ld) + #set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC # linker file "LINKER:--script=${LD_FILE_GNU}" - -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc + #-L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc + -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script + -Wl,--defsym=end=__bss_end__ -nostartfiles - # nanolib - --specs=nano.specs - --specs=nosys.specs + --specs=nano.specs --specs=nosys.specs ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/tools/get_deps.py b/tools/get_deps.py index 58709414c..c8459c1f1 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -62,7 +62,7 @@ deps_optional = { 'fe9133fc513b82cc3dc62c67cb51f2339cf29ef7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', - 'd52e5a6a59b7c638da860c2bb309b6e78e752ff8', + 'edcc97d684b6f716728a60d7a6fea049d9870bd6', 'ra'], 'hw/mcu/renesas/rx': ['https://github.com/kkitayam/rx_device.git', '706b4e0cf485605c32351e2f90f5698267996023', @@ -194,13 +194,16 @@ deps_optional = { '77c4095087e5ed2c548ec9058e655d0b8757663b', 'ch32f20x'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', - '20285262657d1b482d132d20d755c8c330d55c1f', - 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x ' + '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', + 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb ' 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' 'tm4c '], + 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', + 'b0bbb0423b278ca632cfe1474eb227961d835fd2', + 'ra'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From 8f2b1bc7b9705493e028b9212728ebcc2aaa8abb Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Dec 2024 15:37:07 +0700 Subject: used pin generated by rasc --- hw/bsp/ra/board_cfg.h | 52 +-- hw/bsp/ra/boards/ra6m1_ek/board.h | 12 +- .../boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 120 +++--- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 146 ++++---- .../ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 17 + hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c | 11 + hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h | 20 + hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c | 115 ++++++ .../ra6m1_ek/smart_configurator/configuration.xml | 163 ++++---- hw/bsp/ra/boards/ra6m5_ek/board.h | 26 -- .../boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 115 +++--- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 99 +++++ hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c | 11 + hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h | 20 + hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c | 411 +++++++++++++++++++++ .../ra6m5_ek/smart_configurator/configuration.xml | 63 ++-- hw/bsp/ra/boards/uno_r4/board.h | 16 +- .../boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 17 + hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c | 11 + hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h | 20 + hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c | 75 ++++ .../uno_r4/smart_configurator/configuration.xml | 35 +- hw/bsp/ra/family.c | 25 +- hw/bsp/ra/family.cmake | 4 +- hw/bsp/ra/vector_data.h | 4 + 27 files changed, 1189 insertions(+), 443 deletions(-) create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c create mode 100644 hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/board_cfg.h b/hw/bsp/ra/board_cfg.h index baed46b5f..825f8cd32 100644 --- a/hw/bsp/ra/board_cfg.h +++ b/hw/bsp/ra/board_cfg.h @@ -1,45 +1,13 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2023 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#ifndef _BOARD_CFG_H -#define _BOARD_CFG_H - +/* generated configuration header file - do not edit */ +#ifndef BOARD_CFG_H_ +#define BOARD_CFG_H_ #ifdef __cplusplus -extern "C" { -#endif - -#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) - #define BOARD_HAS_USB_HIGHSPEED -#endif + extern "C" { + #endif -// for SystemInit() -void bsp_init(void * p_args); - - -#ifdef __cplusplus -} -#endif + void bsp_init(void * p_args); -#endif + #ifdef __cplusplus + } + #endif +#endif /* BOARD_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h index f73a08fc0..ba663d040 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/board.h +++ b/hw/bsp/ra/boards/ra6m1_ek/board.h @@ -31,19 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_12 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_04_PIN_15 +#define LED_STATE_ON 1 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT }, - { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, - // USB FS - { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS }, -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index 772e5e5b1..90afbdef3 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -1,68 +1,62 @@ /* generated configuration header file - do not edit */ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif - -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif - -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif - -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - #ifdef __cplusplus -} -#endif - + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index 40bb3a3bf..5e7841442 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA6M1AD3CFP -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (524288) -#define BSP_RAM_SIZE_BYTES (262144) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (100) + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (524288) + #define BSP_RAM_SIZE_BYTES (262144) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (100) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index 5fedd754f..16349b5ff 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -2,83 +2,83 @@ #ifndef BSP_MCU_FAMILY_CFG_H_ #define BSP_MCU_FAMILY_CFG_H_ #ifdef __cplusplus -extern "C" { -#endif + extern "C" { + #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA6M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif -#define BSP_MCU_GROUP_RA6M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* + ID Code + Note: To lock and disable the debug interface define BSP_ID_CODE_LOCKED in compiler settings. + WARNING: This will disable debug access to the part. However, ALeRASE command will be accepted, which will clear (reset) the ID code. After clearing ID code, debug access will be enabled. + */ + #if defined(BSP_ID_CODE_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) - #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) - #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) -#else - /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ - #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) - #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif - -#ifdef __cplusplus -} -#endif + #ifdef __cplusplus + } + #endif #endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..8ba9aafba --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define LED1 (BSP_IO_PORT_01_PIN_12) +#define SW1 (BSP_IO_PORT_04_PIN_15) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA6M1-EK.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..80774b0a5 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/ra_gen/pin_data.c @@ -0,0 +1,115 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_02_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml index 2f373930c..4c5d77ed0 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml +++ b/hw/bsp/ra/boards/ra6m1_ek/smart_configurator/configuration.xml @@ -1,7 +1,6 @@ - + - @@ -87,8 +87,8 @@ - - + + @@ -175,125 +175,96 @@ Renesas.RA_mcu_ra6m1.5.6.0.pack + - + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + - - - - - + + + + + + - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - + - - - - - - - - - - - - - - - - - + - - + + + - + + - - + - - + - + diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h index 779f71810..33dda99b4 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.h +++ b/hw/bsp/ra/boards/ra6m5_ek/board.h @@ -31,35 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_00_PIN_08 #define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_00_PIN_05 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW }, - { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, - - // USB FS - { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH }, - { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - - // USB HS - { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS }, - { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - - // ETM Trace - #ifdef TRACE_ETM - { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - #endif -}; #ifdef __cplusplus } diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index 33d381850..90afbdef3 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -2,62 +2,61 @@ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ #ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index 6845183db..e532478f8 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA6M5BH3CFC -#define BSP_MCU_FEATURE_SET ('B') -#define BSP_ROM_SIZE_BYTES (2097152) -#define BSP_RAM_SIZE_BYTES (524288) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (176) + #define BSP_MCU_FEATURE_SET ('B') + #define BSP_ROM_SIZE_BYTES (2097152) + #define BSP_RAM_SIZE_BYTES (524288) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (176) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..d2eec08ae --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,99 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define MIKROBUS_AN_ARDUINO_A0 (BSP_IO_PORT_00_PIN_00) +#define ARDUINO_A1 (BSP_IO_PORT_00_PIN_01) +#define ARDUINO_A2 (BSP_IO_PORT_00_PIN_02) +#define ARDUINO_A3 (BSP_IO_PORT_00_PIN_03) +#define SW2 (BSP_IO_PORT_00_PIN_04) +#define SW1 (BSP_IO_PORT_00_PIN_05) +#define LED1 (BSP_IO_PORT_00_PIN_06) +#define LED2 (BSP_IO_PORT_00_PIN_07) +#define LED3 (BSP_IO_PORT_00_PIN_08) +#define ARDUINO_A4 (BSP_IO_PORT_00_PIN_14) +#define ARDUINO_A5 (BSP_IO_PORT_00_PIN_15) +#define OSPI_CLK (BSP_IO_PORT_01_PIN_00) +#define OSPI_SIO7 (BSP_IO_PORT_01_PIN_01) +#define OSPI_SIO1 (BSP_IO_PORT_01_PIN_02) +#define OSPI_SIO6 (BSP_IO_PORT_01_PIN_03) +#define OSPI_DQS (BSP_IO_PORT_01_PIN_04) +#define OSPI_SIO5 (BSP_IO_PORT_01_PIN_05) +#define OSPI_SIO0 (BSP_IO_PORT_01_PIN_06) +#define OSPI_SIO3 (BSP_IO_PORT_01_PIN_07) +#define MIKROBUS_PWM_ARDUINO_D3_PWM (BSP_IO_PORT_01_PIN_11) +#define ARDUINO_D4 (BSP_IO_PORT_01_PIN_12) +#define ARDUINO_D5 (BSP_IO_PORT_01_PIN_13) +#define ARDUINO_D6 (BSP_IO_PORT_01_PIN_14) +#define ARDUINO_D9 (BSP_IO_PORT_01_PIN_15) +#define MIKROBUS_MISO_ARDUINO_MISO_PMOD1_MISO (BSP_IO_PORT_02_PIN_02) +#define MIKROBUS_MOSI_ARDUINO_MOSI_PMOD1_MOSI (BSP_IO_PORT_02_PIN_03) +#define MIKROBUS_SCK_ARDUINO_SCK_PMOD1_SCK (BSP_IO_PORT_02_PIN_04) +#define MIKROBUS_SS_ARDUINO_SS (BSP_IO_PORT_02_PIN_05) +#define PMOD1_SS (BSP_IO_PORT_02_PIN_06) +#define ARDUINO_D8 (BSP_IO_PORT_02_PIN_07) +#define PMOD1_SS2 (BSP_IO_PORT_03_PIN_01) +#define PMOD1_SS3 (BSP_IO_PORT_03_PIN_02) +#define MIKROBUS_RESET_ARDUINO_RESET (BSP_IO_PORT_03_PIN_03) +#define QSPI_CLK (BSP_IO_PORT_03_PIN_05) +#define QSPI_CS (BSP_IO_PORT_03_PIN_06) +#define QSPI_IO0 (BSP_IO_PORT_03_PIN_07) +#define QSPI_IO1 (BSP_IO_PORT_03_PIN_08) +#define QSPI_IO2 (BSP_IO_PORT_03_PIN_09) +#define QSPI_IO3 (BSP_IO_PORT_03_PIN_10) +#define PMOD1_RST (BSP_IO_PORT_03_PIN_11) +#define PMOD2_INT (BSP_IO_PORT_04_PIN_00) +#define ETH_MDC (BSP_IO_PORT_04_PIN_01) +#define ETH_MDIO (BSP_IO_PORT_04_PIN_02) +#define ETH_RST (BSP_IO_PORT_04_PIN_03) +#define PMOD2_RST (BSP_IO_PORT_04_PIN_04) +#define ETH_TXEN (BSP_IO_PORT_04_PIN_05) +#define ETH_TXD1 (BSP_IO_PORT_04_PIN_06) +#define USBFS_VBUS (BSP_IO_PORT_04_PIN_07) +#define PMOD2_SS2 (BSP_IO_PORT_04_PIN_08) +#define MIKROBUS_INT_ARDUINO_INT0 (BSP_IO_PORT_04_PIN_09) +#define PMOD2_MISO (BSP_IO_PORT_04_PIN_10) +#define PMOD2_MOSI (BSP_IO_PORT_04_PIN_11) +#define PMOD2_SCK (BSP_IO_PORT_04_PIN_12) +#define PMOS2_SS (BSP_IO_PORT_04_PIN_13) +#define GROVE1_SDA_QWIIC_SDA (BSP_IO_PORT_04_PIN_14) +#define GROVE1_SCL_QWIIC_SCL (BSP_IO_PORT_04_PIN_15) +#define USBFS_VBUS_EN (BSP_IO_PORT_05_PIN_00) +#define USBFS_OVERCURA (BSP_IO_PORT_05_PIN_01) +#define GROVE2_SCL (BSP_IO_PORT_05_PIN_05) +#define GROVE2_SDA (BSP_IO_PORT_05_PIN_06) +#define MIKROBUS_SDA_ARDUINO_SDA (BSP_IO_PORT_05_PIN_11) +#define MIKROBUS_SCL_ARDUINO_SCL (BSP_IO_PORT_05_PIN_12) +#define OSPI_SIO4 (BSP_IO_PORT_06_PIN_00) +#define OSPI_SIO2 (BSP_IO_PORT_06_PIN_01) +#define OSPI_CS1 (BSP_IO_PORT_06_PIN_02) +#define ARDUINO_D7 (BSP_IO_PORT_06_PIN_08) +#define CAN_TXD (BSP_IO_PORT_06_PIN_09) +#define CAN_RDX (BSP_IO_PORT_06_PIN_10) +#define CAN_STBY (BSP_IO_PORT_06_PIN_11) +#define MIKROBUS_TX_ARDUINO_TX (BSP_IO_PORT_06_PIN_13) +#define MIKROBUS_RX_ARDUINO_RX (BSP_IO_PORT_06_PIN_14) +#define OSPI_RST (BSP_IO_PORT_06_PIN_15) +#define ETH_TXD0 (BSP_IO_PORT_07_PIN_00) +#define ETH_50REF (BSP_IO_PORT_07_PIN_01) +#define ETH_RXD0 (BSP_IO_PORT_07_PIN_02) +#define ETH_RXD1 (BSP_IO_PORT_07_PIN_03) +#define ETH_RXERR (BSP_IO_PORT_07_PIN_04) +#define ETH_CRSDV (BSP_IO_PORT_07_PIN_05) +#define ETH_INT (BSP_IO_PORT_07_PIN_06) +#define USBHS_OVERCURA (BSP_IO_PORT_07_PIN_07) +#define PMOD2_SS3 (BSP_IO_PORT_07_PIN_08) +#define PMOD1_INT (BSP_IO_PORT_09_PIN_05) +#define USBHS_VBUS_EN (BSP_IO_PORT_11_PIN_00) +#define USBHS_VBUS (BSP_IO_PORT_11_PIN_01) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA6M5 EK */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..6b814d74a --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ra_gen/pin_data.c @@ -0,0 +1,411 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_00_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_00_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_00_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_GPT1) + }, + { + .pin = BSP_IO_PORT_01_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_HIGH) + }, + { + .pin = BSP_IO_PORT_04_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_04_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_05_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_05_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_06_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_06_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_06_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_06_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_06_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CAN) + }, + { + .pin = BSP_IO_PORT_06_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CAN) + }, + { + .pin = BSP_IO_PORT_06_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_06_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_MID | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_HIGH) + }, + { + .pin = BSP_IO_PORT_07_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_ETHER_RMII) + }, + { + .pin = BSP_IO_PORT_07_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_07_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_07_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_09_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_11_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_11_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml index f77a8ac63..4544d0f2a 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml +++ b/hw/bsp/ra/boards/ra6m5_ek/smart_configurator/configuration.xml @@ -1,7 +1,6 @@ - + - @@ -63,12 +63,12 @@ - - - - - - + + + + + + @@ -93,8 +93,8 @@ - - + + @@ -198,15 +198,23 @@ Renesas.RA_mcu_ra6m5.5.6.0.pack + - + + + + + + + + @@ -427,10 +435,20 @@ + + + + + + + + + + @@ -540,25 +558,20 @@ - - - - - @@ -629,6 +642,12 @@ + + + + + + @@ -638,14 +657,14 @@ - + - - + - + + - + diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h index 72abda27f..2c262bb9b 100644 --- a/hw/bsp/ra/boards/uno_r4/board.h +++ b/hw/bsp/ra/boards/uno_r4/board.h @@ -31,20 +31,8 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_11 // D13 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_01_PIN_10 // D12 -#define BUTTON_STATE_ACTIVE 0 - -static const ioport_pin_cfg_t board_pin_cfg[] = { - {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, - {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, - // USB FS D+, D-, VBus - {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, -}; +#define LED_STATE_ON 1 +#define BUTTON_STATE_ACTIVE 0 #ifdef __cplusplus } diff --git a/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..5440b293b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define SW1 (BSP_IO_PORT_01_PIN_10) /* active low */ +#define LED1 (BSP_IO_PORT_01_PIN_11) /* active high */ +extern const ioport_cfg_t g_bsp_pin_cfg; /* R7FA4M1AB3CNE.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c b/hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c new file mode 100644 index 000000000..58262de8b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/ra_gen/pin_data.c @@ -0,0 +1,75 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml index 49603d5bf..b716c8ec9 100644 --- a/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml +++ b/hw/bsp/ra/boards/uno_r4/smart_configurator/configuration.xml @@ -186,20 +186,33 @@ + + + + - - - - - - + + + + - - - - - + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 87f7b4a22..c6575e88d 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -30,13 +30,12 @@ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" #pragma GCC diagnostic ignored "-Wundef" - -// extra push due to https://github.com/renesas/fsp/pull/278 -#pragma GCC diagnostic push #endif -#include "bsp_api.h" -#include "r_ioport.h" +//#include "bsp_api.h" +//#include "r_ioport.h" +#include "common_data.h" + #include "r_ioport_api.h" #include "renesas.h" @@ -50,11 +49,11 @@ /* Key code for writing PRCR register. */ #define BSP_PRV_PRCR_KEY (0xA500U) -static const ioport_cfg_t family_pin_cfg = { - .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), - .p_pin_cfg_data = board_pin_cfg, -}; -static ioport_instance_ctrl_t port_ctrl; +// static const ioport_cfg_t family_pin_cfg = { +// .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), +// .p_pin_cfg_data = board_pin_cfg, +// }; +// static ioport_instance_ctrl_t port_ctrl; //--------------------------------------------------------------------+ // Vector Data @@ -103,7 +102,7 @@ void board_init(void) { __enable_irq(); /* Configure pins. */ - R_IOPORT_Open(&port_ctrl, &family_pin_cfg); + R_IOPORT_Open(&IOPORT_CFG_CTRL, &IOPORT_CFG_NAME); #ifdef TRACE_ETM // TRCKCR is protected by PRCR bit0 register @@ -138,12 +137,12 @@ void board_init_after_tusb(void) { } void board_led_write(bool state) { - R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); + R_IOPORT_PinWrite(&IOPORT_CFG_CTRL, LED1, state ? LED_STATE_ON : !LED_STATE_ON); } uint32_t board_button_read(void) { bsp_io_level_t lvl = !BUTTON_STATE_ACTIVE; - R_IOPORT_PinRead(&port_ctrl, SW1, &lvl); + R_IOPORT_PinRead(&IOPORT_CFG_CTRL, SW1, &lvl); return lvl == BUTTON_STATE_ACTIVE; } diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 00907c598..56c0487c1 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -36,6 +36,8 @@ function(add_board_target BOARD_TARGET) ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c ${FSP_RA}/src/bsp/mcu/all/bsp_security.c ${FSP_RA}/src/r_ioport/r_ioport.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/pin_data.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/common_data.c ) target_compile_options(${BOARD_TARGET} PUBLIC @@ -60,14 +62,12 @@ function(add_board_target BOARD_TARGET) if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script/fsp.ld) - #set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) endif () if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC # linker file "LINKER:--script=${LD_FILE_GNU}" - #-L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/script -Wl,--defsym=end=__bss_end__ -nostartfiles diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h index 2b3b7d837..a85d064bd 100644 --- a/hw/bsp/ra/vector_data.h +++ b/hw/bsp/ra/vector_data.h @@ -6,6 +6,10 @@ extern "C" { #endif +#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) +#define BOARD_HAS_USB_HIGHSPEED +#endif + /* ISR prototypes */ void usbfs_interrupt_handler(void); void usbfs_resume_handler(void); -- cgit v1.3.1 From f294400a11d0aa2b878a19133d9e17b405941d9d Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Dec 2024 16:21:47 +0700 Subject: rasc for ra4m3 ek --- .../boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 115 ++-- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 230 ++++--- .../ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 67 ++ hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h | 8 +- hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c | 11 + hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h | 20 + hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c | 263 +++++++ hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld | 22 + .../ra4m3_ek/smart_configurator/configuration.xml | 432 ++++++++++++ 11 files changed, 1764 insertions(+), 182 deletions(-) create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c create mode 100644 hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/ra4m3_ek/smart_configurator/configuration.xml (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index 862ec25b7..96087fa0d 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -2,62 +2,61 @@ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ #ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) -#define BSP_CFG_RTOS (1) -#else -#define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x800) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x800) + #define BSP_CFG_HEAP_BYTES (0x800) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index 1a0bc02e2..1aaa4be0a 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA4M3AF3CFB -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (1048576) -#define BSP_RAM_SIZE_BYTES (131072) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (144) + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (1048576) + #define BSP_RAM_SIZE_BYTES (131072) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (144) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index 26e184a94..cb9429057 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,17 +5,17 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" -#define BSP_MCU_GROUP_RA4M3 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA4M3 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 #define BSP_HOCO_HZ (18000000) #elif BSP_CFG_HOCO_FREQUENCY == 2 #define BSP_HOCO_HZ (20000000) @@ -23,61 +23,62 @@ extern "C" { #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" #endif -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#if defined(_RA_TZ_SECURE) + #if defined(_RA_TZ_SECURE) #define BSP_TZ_SECURE_BUILD (1) #define BSP_TZ_NONSECURE_BUILD (0) #elif defined(_RA_TZ_NONSECURE) #define BSP_TZ_SECURE_BUILD (0) #define BSP_TZ_NONSECURE_BUILD (1) #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) #ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) + #define SCB_NSACR_CP10_11_VAL (3U) #endif #ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) + #define FPU_FPCCR_TS_VAL (1U) #endif -#define FPU_FPCCR_CLRONRETS_VAL (1) + #define FPU_FPCCR_CLRONRETS_VAL (1) #ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) + #define FPU_FPCCR_CLRONRET_VAL (1) #endif -/* The C-Cache line size that is configured during startup. */ + /* The C-Cache line size that is configured during startup. */ #ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) + #define BSP_CFG_C_CACHE_LINE_SIZE (1U) #endif -/* Type 1 Peripheral Security Attribution */ + /* Type 1 Peripheral Security Attribution */ -/* Peripheral Security Attribution Register (PSAR) Settings */ + /* Peripheral Security Attribution Register (PSAR) Settings */ #ifndef BSP_TZ_CFG_PSARB #define BSP_TZ_CFG_PSARB (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ @@ -114,7 +115,7 @@ extern "C" { (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ - (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ 0xffae07f0) /* Unused */ @@ -129,13 +130,13 @@ extern "C" { (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ - (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ - (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ - (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ - (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ 0x3f3ff8) /* Unused */ #endif #ifndef BSP_TZ_CFG_MSSAR @@ -145,19 +146,19 @@ extern "C" { 0xfffffffc) /* Unused */ #endif -/* Type 2 Peripheral Security Attribution */ + /* Type 2 Peripheral Security Attribution */ -/* Security attribution for Cache registers. */ + /* Security attribution for Cache registers. */ #ifndef BSP_TZ_CFG_CSAR #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) #endif -/* Security attribution for RSTSRn registers. */ + /* Security attribution for RSTSRn registers. */ #ifndef BSP_TZ_CFG_RSTSAR #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) #endif -/* Security attribution for registers of LVD channels. */ + /* Security attribution for registers of LVD channels. */ #ifndef BSP_TZ_CFG_LVDSAR #define BSP_TZ_CFG_LVDSAR (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ @@ -165,16 +166,16 @@ extern "C" { 0xFFFFFFFCU) #endif -/* Security attribution for LPM registers. */ + /* Security attribution for LPM registers. */ #ifndef BSP_TZ_CFG_LPMSAR #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) #endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ + /* Deep Standby Interrupt Factor Security Attribution Register. */ #ifndef BSP_TZ_CFG_DPFSAR #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) #endif -/* Security attribution for CGC registers. */ + /* Security attribution for CGC registers. */ #ifndef BSP_TZ_CFG_CGFSAR #if BSP_CFG_CLOCKS_SECURE /* Protect all CGC registers from Non-secure write access. */ @@ -185,12 +186,12 @@ extern "C" { #endif #endif -/* Security attribution for Battery Backup registers. */ + /* Security attribution for Battery Backup registers. */ #ifndef BSP_TZ_CFG_BBFSAR #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) #endif -/* Security attribution for registers for IRQ channels. */ + /* Security attribution for registers for IRQ channels. */ #ifndef BSP_TZ_CFG_ICUSARA #define BSP_TZ_CFG_ICUSARA (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ @@ -203,8 +204,8 @@ extern "C" { (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ - (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ - (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ @@ -212,12 +213,12 @@ extern "C" { 0xFFFF0000U) #endif -/* Security attribution for NMI registers. */ + /* Security attribution for NMI registers. */ #ifndef BSP_TZ_CFG_ICUSARB #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ #endif -/* Security attribution for registers for DMAC channels */ + /* Security attribution for registers for DMAC channels */ #ifndef BSP_TZ_CFG_ICUSARC #define BSP_TZ_CFG_ICUSARC (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ @@ -231,29 +232,29 @@ extern "C" { 0xFFFFFF00U) #endif -/* Security attribution registers for SELSR0. */ + /* Security attribution registers for SELSR0. */ #ifndef BSP_TZ_CFG_ICUSARD #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN0. */ + /* Security attribution registers for WUPEN0. */ #ifndef BSP_TZ_CFG_ICUSARE #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN1. */ + /* Security attribution registers for WUPEN1. */ #ifndef BSP_TZ_CFG_ICUSARF #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) #endif -/* Set DTCSTSAR if the Secure program uses the DTC. */ + /* Set DTCSTSAR if the Secure program uses the DTC. */ #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) + #define BSP_TZ_CFG_DTC_USED (0U) #else #define BSP_TZ_CFG_DTC_USED (1U) #endif -/* Security attribution of FLWT and FCKMHZ registers. */ + /* Security attribution of FLWT and FCKMHZ registers. */ #ifndef BSP_TZ_CFG_FSAR /* If the CGC registers are only accessible in Secure mode, than there is no * reason for nonsecure applications to access FLWT and FCKMHZ. */ @@ -266,118 +267,119 @@ extern "C" { #endif #endif -/* Security attribution for SRAM registers. */ + /* Security attribution for SRAM registers. */ #ifndef BSP_TZ_CFG_SRAMSAR /* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ + #define BSP_TZ_CFG_SRAMSAR (\ 1 | \ ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ 4 | \ 0xFFFFFFF8U) #endif -/* Security attribution for Standby RAM registers. */ + /* Security attribution for Standby RAM registers. */ #ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) + #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) #endif -/* Security attribution for the DMAC Bus Master MPU settings. */ + /* Security attribution for the DMAC Bus Master MPU settings. */ #ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) #endif -/* Security Attribution Register A for BUS Control registers. */ + /* Security Attribution Register A for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) #endif -/* Security Attribution Register B for BUS Control registers. */ + /* Security Attribution Register B for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) #endif -/* Enable Uninitialized Non-Secure Application Fallback. */ + /* Enable Uninitialized Non-Secure Application Fallback. */ #ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) #endif -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -/* Option Function Select Register 1 Security Attribution */ + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + /* Option Function Select Register 1 Security Attribution */ #ifndef BSP_CFG_ROM_REG_OFS1_SEL #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((0U << 0U)) | ((0U << 2U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U)) #else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) #endif #endif -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* Dual Mode Select Register */ + /* Dual Mode Select Register */ #ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) #endif -/* Block Protection Register 0 */ + /* Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) #endif -/* Block Protection Register 1 */ + /* Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) #endif -/* Block Protection Register 2 */ + /* Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) #endif -/* Block Protection Register 3 */ + /* Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 0 */ + /* Permanent Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) #endif -/* Permanent Block Protection Register 1 */ + /* Permanent Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) #endif -/* Permanent Block Protection Register 2 */ + /* Permanent Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 3 */ + /* Permanent Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) #endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) #endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU) #endif #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) #endif #ifdef __cplusplus diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..8ed58a11b --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,67 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define ARDUINO_A0_MIKROBUS_AN (BSP_IO_PORT_00_PIN_00) +#define ARDUINO_A1 (BSP_IO_PORT_00_PIN_01) +#define ARDUINO_A2 (BSP_IO_PORT_00_PIN_03) +#define SW1 (BSP_IO_PORT_00_PIN_05) +#define SW2 (BSP_IO_PORT_00_PIN_06) +#define ARDUINO_A3 (BSP_IO_PORT_00_PIN_07) +#define PMOD1_INT (BSP_IO_PORT_00_PIN_08) +#define ARDUINO_A4 (BSP_IO_PORT_00_PIN_14) +#define ARDUINO_A5 (BSP_IO_PORT_00_PIN_15) +#define ARDUINO_RX_MIKROBUS_RX (BSP_IO_PORT_01_PIN_00) +#define ARDUINO_TX_MIKROBUS_TX (BSP_IO_PORT_01_PIN_01) +#define ARDUINO_D2 (BSP_IO_PORT_01_PIN_05) +#define ARDUINO_D3 (BSP_IO_PORT_01_PIN_11) +#define MIKROBUS_RST (BSP_IO_PORT_01_PIN_15) +#define ARDUINO_MISO_MIKROBUS_MISO_PMOD1_MISO (BSP_IO_PORT_02_PIN_02) +#define ARDUINO_MOSI_MIKROBUS_MOSI_PMOD1_MOSI (BSP_IO_PORT_02_PIN_03) +#define ARDUINO_CLK_MIKROBUS_CLK_PMOD1_CLK (BSP_IO_PORT_02_PIN_04) +#define ARDUINO_SS_MIKCRBUS_SS (BSP_IO_PORT_02_PIN_05) +#define PMOD1_SS1 (BSP_IO_PORT_02_PIN_06) +#define PMOD1_SS2 (BSP_IO_PORT_02_PIN_07) +#define PMOD1_SS3 (BSP_IO_PORT_03_PIN_02) +#define ARDUINO_D9 (BSP_IO_PORT_03_PIN_03) +#define ARDUINO_D7 (BSP_IO_PORT_03_PIN_04) +#define QSPI_CLK (BSP_IO_PORT_03_PIN_05) +#define QSPI_SSL (BSP_IO_PORT_03_PIN_06) +#define QSPI_IO0 (BSP_IO_PORT_03_PIN_07) +#define QSPI_IO1 (BSP_IO_PORT_03_PIN_08) +#define QSPI_IO2 (BSP_IO_PORT_03_PIN_09) +#define QSPI_IO3 (BSP_IO_PORT_03_PIN_10) +#define PMOD1_RST (BSP_IO_PORT_03_PIN_11) +#define LED3 (BSP_IO_PORT_04_PIN_00) +#define LED2 (BSP_IO_PORT_04_PIN_04) +#define USB_VBUS (BSP_IO_PORT_04_PIN_07) +#define ARDUINO_D6_MIKROBUS_PWM (BSP_IO_PORT_04_PIN_08) +#define MIKROBUS_INT (BSP_IO_PORT_04_PIN_09) +#define PMOD2_INT (BSP_IO_PORT_04_PIN_14) +#define LED1 (BSP_IO_PORT_04_PIN_15) +#define USB_VBUS_EN (BSP_IO_PORT_05_PIN_00) +#define USB_VBUS_OC (BSP_IO_PORT_05_PIN_01) +#define GROVE2_AN1 (BSP_IO_PORT_05_PIN_05) +#define GROVE2_AN2 (BSP_IO_PORT_05_PIN_06) +#define GROVE1_SDA_QWIIC_SDA (BSP_IO_PORT_05_PIN_11) +#define GROVE1_SCL_QWIIC_SCL (BSP_IO_PORT_05_PIN_12) +#define ARDUINO_SCL_MIKROBUS_SCL (BSP_IO_PORT_06_PIN_01) +#define ARDUINO_SDA_MIKROBUS_SDA (BSP_IO_PORT_06_PIN_02) +#define ARDUINO_D8 (BSP_IO_PORT_06_PIN_11) +#define ARDUINO_RST (BSP_IO_PORT_06_PIN_12) +#define PMOD2_RST (BSP_IO_PORT_07_PIN_08) +#define PMOD2_SS2 (BSP_IO_PORT_07_PIN_09) +#define PMOD2_SS3 (BSP_IO_PORT_07_PIN_10) +#define ARDUINO_D5 (BSP_IO_PORT_07_PIN_12) +#define ARDUINO_D4 (BSP_IO_PORT_07_PIN_13) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA4M3 EK */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h index 80641945d..3eac2985e 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/bsp_clock_cfg.h @@ -7,10 +7,10 @@ #define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL Mul x24.0 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(25U,0U) /* PLL Mul x25.0 */ #define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */ -#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL2 Mul x24.0 */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL2 Mul x20.0 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ #define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ #define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ @@ -21,5 +21,5 @@ #define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ #define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ #define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..bf30782cf --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/ra_gen/pin_data.c @@ -0,0 +1,263 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_03_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_QSPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_GPT1) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_04_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_05_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_05_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_05_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_06_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_NMOS_ENABLE | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_06_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_06_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_07_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld b/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld new file mode 100644 index 000000000..04d7de497 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x20000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x100000; + DATA_FLASH_START = 0x08000000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x0100A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0100A200; + OPTION_SETTING_S_LENGTH = 0x100; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra4m3_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra4m3_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..1d75f1b72 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/smart_configurator/configuration.xml @@ -0,0 +1,432 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + Board support package for R7FA4M3AF3CFB + Renesas.RA_mcu_ra4m3.5.6.0.pack + + + Board support package for RA4M3 + Renesas.RA_mcu_ra4m3.5.6.0.pack + + + Board support package for RA4M3 - FSP Data + Renesas.RA_mcu_ra4m3.5.6.0.pack + + + Board support package for RA4M3 - Events + Renesas.RA_mcu_ra4m3.5.6.0.pack + + + RA4M3-EK Board Support Files + Renesas.RA_board_ra4m3_ek.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + -- cgit v1.3.1 From ec1c8b99e27e03e0d79da74706034ea184bf8a36 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Dec 2024 16:30:09 +0700 Subject: rasc for ra4m1_ek --- hw/bsp/ra/boards/ra4m1_ek/board.h | 14 +- .../boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 89 ++- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 138 ++-- .../ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 17 + hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h | 2 +- hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c | 11 + hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h | 20 + hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c | 119 ++++ hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld | 766 +++++++++++++++++++++ hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld | 22 + 11 files changed, 1093 insertions(+), 117 deletions(-) create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c create mode 100644 hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h index c132387bc..ba663d040 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/board.h +++ b/hw/bsp/ra/boards/ra4m1_ek/board.h @@ -31,21 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_06 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_01_PIN_05 +#define LED_STATE_ON 1 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, - {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, - // USB FS D+, D-, VBus - {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index 11d5795df..43b0f5b65 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -1,35 +1,62 @@ /* generated configuration header file - do not edit */ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#undef RA_NOT_DEFINED -#define BSP_CFG_RTOS (0) -#if defined(_RA_BOOT_IMAGE) -#define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x800) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) - -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 - +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x800) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index d810dabb2..243fad9b6 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA4M1AB3CFP -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (100) + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (262144) + #define BSP_RAM_SIZE_BYTES (32768) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (100) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index 72cdb89e6..3d482b2b6 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -1,78 +1,84 @@ -/* generated configuration header file through renesas e2 studio */ +/* generated configuration header file - do not edit */ #ifndef BSP_MCU_FAMILY_CFG_H_ #define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA4M1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 - #define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) -#elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) -#elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra4m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA4M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) + #define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + /* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ + #if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif + #ifdef __cplusplus + } + #endif #endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..f77a5bcec --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define SW1 (BSP_IO_PORT_01_PIN_05) +#define LED1 (BSP_IO_PORT_01_PIN_06) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA4M1-EK.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h index 554126523..81ac5dc11 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/bsp_clock_cfg.h @@ -7,7 +7,7 @@ #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ #define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(8U,0U) /* PLL Mul x8 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..baa713443 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/ra_gen/pin_data.c @@ -0,0 +1,119 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_04_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_04_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld new file mode 100644 index 000000000..2d6992fed --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x8000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x40000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x01010018; + ID_CODE_LENGTH = 0x20; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; -- cgit v1.3.1 From 4d1f9450969146da89aca1e3064c7f27d2645ba9 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Dec 2024 16:45:45 +0700 Subject: rasc ra2a1_ek, but usb does not seem to work. Note fsp.ld need extra 0x100 byte for ROM registers to work. --- .idea/cmake.xml | 7 +- hw/bsp/ra/boards/ra2a1_ek/board.h | 14 +- .../boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 80 +-- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 119 ++-- .../ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 17 + hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h | 2 +- hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c | 11 + hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h | 20 + hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c | 115 +++ hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld | 769 +++++++++++++++++++++ hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld | 22 + .../ra2a1_ek/smart_configurator/configuration.xml | 258 +++++++ .../ra4m1_ek/smart_configurator/configuration.xml | 271 ++++++++ hw/bsp/ra/family.c | 6 - 15 files changed, 1597 insertions(+), 126 deletions(-) create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c create mode 100644 hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/ra2a1_ek/smart_configurator/configuration.xml create mode 100644 hw/bsp/ra/boards/ra4m1_ek/smart_configurator/configuration.xml (limited to 'hw/bsp/ra') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 6e58f040c..9399a121a 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -118,11 +118,12 @@ - - + + + - + diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h index 1c2b666d2..ba663d040 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/board.h +++ b/hw/bsp/ra/boards/ra2a1_ek/board.h @@ -31,21 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_02_PIN_05 -#define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_02_PIN_06 +#define LED_STATE_ON 1 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, - {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, - // USB FS D+, D-, VBus - {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, - {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index 30637c17b..bf1fe0cc6 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -5,58 +5,58 @@ extern "C" { #endif -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) #define BSP_CFG_RTOS (2) #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) #define BSP_CFG_RTOS (1) #else -#define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) #define BSP_CFG_BOOT_IMAGE (1) #endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x400) -#define BSP_CFG_HEAP_BYTES (0x400) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x400) + #define BSP_CFG_HEAP_BYTES (0x400) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) -#define BSP_CFG_PFS_PROTECT ((1)) + #define BSP_CFG_PFS_PROTECT ((1)) -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif -#ifdef __cplusplus + #ifdef __cplusplus } #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index 710e85b28..6970e4c33 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA2A1AB3CFM -#define BSP_MCU_FEATURE_SET ('A') -#define BSP_ROM_SIZE_BYTES (262144) -#define BSP_RAM_SIZE_BYTES (32768) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (64) + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (262144) + #define BSP_RAM_SIZE_BYTES (32768) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (64) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index 6caef62cc..24e3efaa2 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,17 +5,17 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" -#define BSP_MCU_GROUP_RA2A1 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (24000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA2A1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 #define BSP_HOCO_HZ (32000000) #elif BSP_CFG_HOCO_FREQUENCY == 4 #define BSP_HOCO_HZ (48000000) @@ -25,60 +25,65 @@ #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" #endif -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (0) -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) -#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) -#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) -#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) -#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) -#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) -#endif -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) + #define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) + #define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) + #define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) + #define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) + #define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) + #define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) + #define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) + #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #endif + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* - ID Code - Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. - WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. - */ -#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + /* + ID Code + Note: To lock and disable the debug interface define BSP_ID_CODE_LOCKED in compiler settings. + WARNING: This will disable debug access to the part. However, ALeRASE command will be accepted, which will clear (reset) the ID code. After clearing ID code, debug access will be enabled. + */ + #if defined(BSP_ID_CODE_LOCKED) #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) #else -/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ -#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) -#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) -#endif + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) + #endif -#ifdef __cplusplus + #if (0) + #define BSP_SECTION_FLASH_GAP BSP_PLACE_IN_SECTION(".flash_gap") + #endif + + #ifdef __cplusplus } #endif #endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..fc48a5809 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define LED1 (BSP_IO_PORT_02_PIN_05) +#define SW1 (BSP_IO_PORT_02_PIN_06) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA2A1-EK.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h index cd9d135f7..6b41669d3 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/bsp_clock_cfg.h @@ -8,7 +8,7 @@ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ #define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ #define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */ #define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..7fed32687 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/ra_gen/pin_data.c @@ -0,0 +1,115 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_01_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_02_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_02_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_02_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_03_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_CTSU) + }, + { + .pin = BSP_IO_PORT_04_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_09_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_09_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld new file mode 100644 index 000000000..605eef7d2 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/script/fsp.ld @@ -0,0 +1,769 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld new file mode 100644 index 000000000..2d6992fed --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/script/memory_regions.ld @@ -0,0 +1,22 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x8000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x40000; + DATA_FLASH_START = 0x40100000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x00000000; + OPTION_SETTING_LENGTH = 0x0; + OPTION_SETTING_S_START = 0x80000000; + OPTION_SETTING_S_LENGTH = 0x0; + ID_CODE_START = 0x01010018; + ID_CODE_LENGTH = 0x20; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80020000; + OSPI_DEVICE_0_LENGTH = 0x0; + OSPI_DEVICE_1_START = 0x80030000; + OSPI_DEVICE_1_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra2a1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra2a1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..beeeb67f2 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/smart_configurator/configuration.xml @@ -0,0 +1,258 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA2A1-EK Board Support Files + Renesas.RA_board_ra2a1_ek.5.6.0.pack + + + Board support package for R7FA2A1AB3CFM + Renesas.RA_mcu_ra2a1.5.6.0.pack + + + Board support package for RA2A1 + Renesas.RA_mcu_ra2a1.5.6.0.pack + + + Board support package for RA2A1 - FSP Data + Renesas.RA_mcu_ra2a1.5.6.0.pack + + + Board support package for RA2A1 - Events + Renesas.RA_mcu_ra2a1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/boards/ra4m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra4m1_ek/smart_configurator/configuration.xml new file mode 100644 index 000000000..2ca7fe595 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/smart_configurator/configuration.xml @@ -0,0 +1,271 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Simple application that blinks an LED. No RTOS included. + Renesas.RA_baremetal_blinky.5.6.0.pack + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + RA4M1-EK Board Support Files + Renesas.RA_board_ra4m1_ek.5.6.0.pack + + + Board support package for R7FA4M1AB3CFP + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 - FSP Data + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + Board support package for RA4M1 - Events + Renesas.RA_mcu_ra4m1.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index c6575e88d..29dcb912c 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -49,12 +49,6 @@ /* Key code for writing PRCR register. */ #define BSP_PRV_PRCR_KEY (0xA500U) -// static const ioport_cfg_t family_pin_cfg = { -// .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), -// .p_pin_cfg_data = board_pin_cfg, -// }; -// static ioport_instance_ctrl_t port_ctrl; - //--------------------------------------------------------------------+ // Vector Data //--------------------------------------------------------------------+ -- cgit v1.3.1 From ec2f2f3523c8a685bb56f5443faf92307f74a308 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Dec 2024 23:50:50 +0700 Subject: rasc for portenta_c33 --- hw/bsp/ra/boards/portenta_c33/board.h | 27 - hw/bsp/ra/boards/portenta_c33/portenta_c33.ld | 25 - .../portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 115 ++-- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 12 +- .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 235 +++---- .../ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h | 62 +- hw/bsp/ra/boards/portenta_c33/script/fsp.ld | 766 +++++++++++++++++++++ .../boards/portenta_c33/script/memory_regions.ld | 25 + .../smart_configurator/configuration.xml | 240 +++++++ hw/bsp/ra/linker/gcc/fsp.ld | 716 ------------------- hw/bsp/ra/linker/gcc/ra2a1.ld | 22 - hw/bsp/ra/linker/gcc/ra4m1.ld | 22 - hw/bsp/ra/linker/gcc/ra4m3.ld | 22 - hw/bsp/ra/linker/gcc/ra6m1.ld | 22 - hw/bsp/ra/linker/gcc/ra6m5.ld | 22 - 15 files changed, 1244 insertions(+), 1089 deletions(-) delete mode 100644 hw/bsp/ra/boards/portenta_c33/portenta_c33.ld create mode 100644 hw/bsp/ra/boards/portenta_c33/script/fsp.ld create mode 100644 hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld create mode 100644 hw/bsp/ra/boards/portenta_c33/smart_configurator/configuration.xml delete mode 100644 hw/bsp/ra/linker/gcc/fsp.ld delete mode 100644 hw/bsp/ra/linker/gcc/ra2a1.ld delete mode 100644 hw/bsp/ra/linker/gcc/ra4m1.ld delete mode 100644 hw/bsp/ra/linker/gcc/ra4m3.ld delete mode 100644 hw/bsp/ra/linker/gcc/ra6m1.ld delete mode 100644 hw/bsp/ra/linker/gcc/ra6m5.ld (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/portenta_c33/board.h b/hw/bsp/ra/boards/portenta_c33/board.h index 7841ec8b8..ba663d040 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.h +++ b/hw/bsp/ra/boards/portenta_c33/board.h @@ -31,36 +31,9 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_07 // Red LED #define LED_STATE_ON 1 - -#define SW1 BSP_IO_PORT_04_PIN_08 // D12 #define BUTTON_STATE_ACTIVE 0 -static const ioport_pin_cfg_t board_pin_cfg[] = { - { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW }, - { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, - - // USB FS - { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH }, - { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, - - // USB HS - { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS }, - { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, - - // ETM Trace - #ifdef TRACE_ETM - { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, - #endif -}; - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld deleted file mode 100644 index ba15588e6..000000000 --- a/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld +++ /dev/null @@ -1,25 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x80000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x200000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x68000000; -OSPI_DEVICE_0_LENGTH = 0x8000000; -OSPI_DEVICE_1_START = 0x70000000; -OSPI_DEVICE_1_LENGTH = 0x10000000; - -/* Board has bootloader */ -FLASH_IMAGE_START = 0x10000; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h index 33d381850..90afbdef3 100644 --- a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -2,62 +2,61 @@ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ #ifdef __cplusplus -extern "C" { -#endif - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_family_cfg.h" -#include "board_cfg.h" - -#define RA_NOT_DEFINED 0 -#ifndef BSP_CFG_RTOS -#if (RA_NOT_DEFINED) != (2) -#define BSP_CFG_RTOS (2) -#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) - #define BSP_CFG_RTOS (1) -#else - #define BSP_CFG_RTOS (0) -#endif -#endif -#ifndef BSP_CFG_RTC_USED -#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) -#endif -#undef RA_NOT_DEFINED -#if defined(_RA_BOOT_IMAGE) - #define BSP_CFG_BOOT_IMAGE (1) -#endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x1000) -#define BSP_CFG_HEAP_BYTES (0x1000) -#define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) - -#define BSP_CFG_PFS_PROTECT ((1)) - -#define BSP_CFG_C_RUNTIME_INIT ((1)) -#define BSP_CFG_EARLY_INIT ((0)) - -#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) -#endif - -#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE -#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE -#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) -#endif -#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS -#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -#endif - -#ifdef __cplusplus -} -#endif + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index 6845183db..e532478f8 100644 --- a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -2,10 +2,10 @@ #ifndef BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_DEVICE_PN_CFG_H_ #define BSP_MCU_R7FA6M5BH3CFC -#define BSP_MCU_FEATURE_SET ('B') -#define BSP_ROM_SIZE_BYTES (2097152) -#define BSP_RAM_SIZE_BYTES (524288) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (176) + #define BSP_MCU_FEATURE_SET ('B') + #define BSP_ROM_SIZE_BYTES (2097152) + #define BSP_RAM_SIZE_BYTES (524288) + #define BSP_DATA_FLASH_SIZE_BYTES (8192) + #define BSP_PACKAGE_LQFP + #define BSP_PACKAGE_PINS (176) #endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h index d5428540f..c01219377 100644 --- a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -5,80 +5,80 @@ extern "C" { #endif -#include "bsp_mcu_device_pn_cfg.h" -#include "bsp_mcu_device_cfg.h" -#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" -#include "bsp_clock_cfg.h" - -#define BSP_MCU_GROUP_RA6M5 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 - #define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (20000000) -#else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif + #include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA6M5 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (32768) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif -#define BSP_CFG_FLL_ENABLE (0) + #define BSP_CFG_FLL_ENABLE (0) -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) -#if defined(_RA_TZ_SECURE) + #if defined(_RA_TZ_SECURE) #define BSP_TZ_SECURE_BUILD (1) #define BSP_TZ_NONSECURE_BUILD (0) #elif defined(_RA_TZ_NONSECURE) #define BSP_TZ_SECURE_BUILD (0) #define BSP_TZ_NONSECURE_BUILD (1) #else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) - -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif + + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) #ifndef SCB_NSACR_CP10_11_VAL -#define SCB_NSACR_CP10_11_VAL (3U) + #define SCB_NSACR_CP10_11_VAL (3U) #endif #ifndef FPU_FPCCR_TS_VAL -#define FPU_FPCCR_TS_VAL (1U) + #define FPU_FPCCR_TS_VAL (1U) #endif -#define FPU_FPCCR_CLRONRETS_VAL (1) + #define FPU_FPCCR_CLRONRETS_VAL (1) #ifndef FPU_FPCCR_CLRONRET_VAL -#define FPU_FPCCR_CLRONRET_VAL (1) + #define FPU_FPCCR_CLRONRET_VAL (1) #endif -/* The C-Cache line size that is configured during startup. */ + /* The C-Cache line size that is configured during startup. */ #ifndef BSP_CFG_C_CACHE_LINE_SIZE -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) + #define BSP_CFG_C_CACHE_LINE_SIZE (1U) #endif -/* Type 1 Peripheral Security Attribution */ + /* Type 1 Peripheral Security Attribution */ -/* Peripheral Security Attribution Register (PSAR) Settings */ + /* Peripheral Security Attribution Register (PSAR) Settings */ #ifndef BSP_TZ_CFG_PSARB #define BSP_TZ_CFG_PSARB (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ @@ -146,19 +146,19 @@ extern "C" { 0xfffffffc) /* Unused */ #endif -/* Type 2 Peripheral Security Attribution */ + /* Type 2 Peripheral Security Attribution */ -/* Security attribution for Cache registers. */ + /* Security attribution for Cache registers. */ #ifndef BSP_TZ_CFG_CSAR #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) #endif -/* Security attribution for RSTSRn registers. */ + /* Security attribution for RSTSRn registers. */ #ifndef BSP_TZ_CFG_RSTSAR #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) #endif -/* Security attribution for registers of LVD channels. */ + /* Security attribution for registers of LVD channels. */ #ifndef BSP_TZ_CFG_LVDSAR #define BSP_TZ_CFG_LVDSAR (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ @@ -166,16 +166,16 @@ extern "C" { 0xFFFFFFFCU) #endif -/* Security attribution for LPM registers. */ + /* Security attribution for LPM registers. */ #ifndef BSP_TZ_CFG_LPMSAR #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) #endif -/* Deep Standby Interrupt Factor Security Attribution Register. */ + /* Deep Standby Interrupt Factor Security Attribution Register. */ #ifndef BSP_TZ_CFG_DPFSAR #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) #endif -/* Security attribution for CGC registers. */ + /* Security attribution for CGC registers. */ #ifndef BSP_TZ_CFG_CGFSAR #if BSP_CFG_CLOCKS_SECURE /* Protect all CGC registers from Non-secure write access. */ @@ -186,12 +186,12 @@ extern "C" { #endif #endif -/* Security attribution for Battery Backup registers. */ + /* Security attribution for Battery Backup registers. */ #ifndef BSP_TZ_CFG_BBFSAR #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) #endif -/* Security attribution for registers for IRQ channels. */ + /* Security attribution for registers for IRQ channels. */ #ifndef BSP_TZ_CFG_ICUSARA #define BSP_TZ_CFG_ICUSARA (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ @@ -213,12 +213,12 @@ extern "C" { 0xFFFF0000U) #endif -/* Security attribution for NMI registers. */ + /* Security attribution for NMI registers. */ #ifndef BSP_TZ_CFG_ICUSARB #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ #endif -/* Security attribution for registers for DMAC channels */ + /* Security attribution for registers for DMAC channels */ #ifndef BSP_TZ_CFG_ICUSARC #define BSP_TZ_CFG_ICUSARC (\ (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ @@ -232,29 +232,29 @@ extern "C" { 0xFFFFFF00U) #endif -/* Security attribution registers for SELSR0. */ + /* Security attribution registers for SELSR0. */ #ifndef BSP_TZ_CFG_ICUSARD #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN0. */ + /* Security attribution registers for WUPEN0. */ #ifndef BSP_TZ_CFG_ICUSARE #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) #endif -/* Security attribution registers for WUPEN1. */ + /* Security attribution registers for WUPEN1. */ #ifndef BSP_TZ_CFG_ICUSARF #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) #endif -/* Set DTCSTSAR if the Secure program uses the DTC. */ + /* Set DTCSTSAR if the Secure program uses the DTC. */ #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) + #define BSP_TZ_CFG_DTC_USED (0U) #else #define BSP_TZ_CFG_DTC_USED (1U) #endif -/* Security attribution of FLWT and FCKMHZ registers. */ + /* Security attribution of FLWT and FCKMHZ registers. */ #ifndef BSP_TZ_CFG_FSAR /* If the CGC registers are only accessible in Secure mode, than there is no * reason for nonsecure applications to access FLWT and FCKMHZ. */ @@ -267,118 +267,123 @@ extern "C" { #endif #endif -/* Security attribution for SRAM registers. */ + /* Security attribution for SRAM registers. */ #ifndef BSP_TZ_CFG_SRAMSAR /* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (\ + #define BSP_TZ_CFG_SRAMSAR (\ 1 | \ ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ 4 | \ 0xFFFFFFF8U) #endif -/* Security attribution for Standby RAM registers. */ + /* Security attribution for Standby RAM registers. */ #ifndef BSP_TZ_CFG_STBRAMSAR -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) + #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) #endif -/* Security attribution for the DMAC Bus Master MPU settings. */ + /* Security attribution for the DMAC Bus Master MPU settings. */ #ifndef BSP_TZ_CFG_MMPUSARA -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) #endif -/* Security Attribution Register A for BUS Control registers. */ + /* Security Attribution Register A for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARA -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) #endif -/* Security Attribution Register B for BUS Control registers. */ + /* Security Attribution Register B for BUS Control registers. */ #ifndef BSP_TZ_CFG_BUSSARB -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) + #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) #endif -/* Enable Uninitialized Non-Secure Application Fallback. */ + /* Enable Uninitialized Non-Secure Application Fallback. */ #ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK -#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) #endif -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) -/* Option Function Select Register 1 Security Attribution */ + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + /* Option Function Select Register 1 Security Attribution */ #ifndef BSP_CFG_ROM_REG_OFS1_SEL #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) - #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((0U << 0U)) | ((0U << 2U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U)) #else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) #endif #endif -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + #define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) -/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) -/* Dual Mode Select Register */ + /* Dual Mode Select Register */ #ifndef BSP_CFG_ROM_REG_DUALSEL -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) #endif -/* Block Protection Register 0 */ + /* Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_BPS0 -#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) #endif -/* Block Protection Register 1 */ + /* Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_BPS1 -#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) #endif -/* Block Protection Register 2 */ + /* Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_BPS2 -#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_BPS2 (~( 0U)) #endif -/* Block Protection Register 3 */ + /* Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_BPS3 -#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) #endif -/* Permanent Block Protection Register 0 */ + /* Permanent Block Protection Register 0 */ #ifndef BSP_CFG_ROM_REG_PBPS0 -#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) #endif -/* Permanent Block Protection Register 1 */ + /* Permanent Block Protection Register 1 */ #ifndef BSP_CFG_ROM_REG_PBPS1 -#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) #endif -/* Permanent Block Protection Register 2 */ + /* Permanent Block Protection Register 2 */ #ifndef BSP_CFG_ROM_REG_PBPS2 -#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) + #define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) #endif -/* Permanent Block Protection Register 3 */ + /* Permanent Block Protection Register 3 */ #ifndef BSP_CFG_ROM_REG_PBPS3 -#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) + #define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) #endif -/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL0 -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) #endif -/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL1 -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) #endif -/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL2 -#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) + #define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) #endif -/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ #ifndef BSP_CFG_ROM_REG_BPS_SEL3 -#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) + #define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif + /* Security Attribution for Bank Select Register */ +#ifndef BSP_CFG_ROM_REG_BANKSEL_SEL + #define BSP_CFG_ROM_REG_BANKSEL_SEL (0xFFFFFFFFU) #endif #ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) #endif #ifdef __cplusplus diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h index 0eb5e0516..91b9de11e 100644 --- a/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/bsp_clock_cfg.h @@ -1,37 +1,35 @@ /* generated configuration header file - do not edit */ #ifndef BSP_CLOCK_CFG_H_ #define BSP_CLOCK_CFG_H_ - -#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_SECURE (0) #define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ -#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ -#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ -#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ -#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ -#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ -#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ -#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ -#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ -#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ -#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ -#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ -#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ - +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(25U,0U) /* PLL Mul x25.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL2 Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ +#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/script/fsp.ld b/hw/bsp/ra/boards/portenta_c33/script/fsp.ld new file mode 100644 index 000000000..627ffe4d9 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/script/fsp.ld @@ -0,0 +1,766 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; +} diff --git a/hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld b/hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld new file mode 100644 index 000000000..74c648329 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/script/memory_regions.ld @@ -0,0 +1,25 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x20000000; + RAM_LENGTH = 0x80000; + FLASH_START = 0x00000000; + FLASH_LENGTH = 0x200000; + DATA_FLASH_START = 0x08000000; + DATA_FLASH_LENGTH = 0x2000; + OPTION_SETTING_START = 0x0100A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0100A200; + OPTION_SETTING_S_LENGTH = 0x100; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x80010000; + SDRAM_LENGTH = 0x0; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x4000000; + OSPI_DEVICE_0_START = 0x68000000; + OSPI_DEVICE_0_LENGTH = 0x8000000; + OSPI_DEVICE_1_START = 0x70000000; + OSPI_DEVICE_1_LENGTH = 0x10000000; + +/* Board has bootloader */ +FLASH_IMAGE_START = 0x10000; diff --git a/hw/bsp/ra/boards/portenta_c33/smart_configurator/configuration.xml b/hw/bsp/ra/boards/portenta_c33/smart_configurator/configuration.xml new file mode 100644 index 000000000..fcc9d711d --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/smart_configurator/configuration.xml @@ -0,0 +1,240 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Board Support Package Common Files + Renesas.RA.5.6.0.pack + + + I/O Port + Renesas.RA.5.6.0.pack + + + Arm CMSIS Version 6 - Core (M) + Arm.CMSIS6.6.1.0+fsp.5.6.0.pack + + + Custom Board Support Files + Renesas.RA_board_custom.5.6.0.pack + + + Board support package for R7FA6M5BH3CFC + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 - FSP Data + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + Board support package for RA6M5 - Events + Renesas.RA_mcu_ra6m5.5.6.0.pack + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/linker/gcc/fsp.ld b/hw/bsp/ra/linker/gcc/fsp.ld deleted file mode 100644 index 453d46f24..000000000 --- a/hw/bsp/ra/linker/gcc/fsp.ld +++ /dev/null @@ -1,716 +0,0 @@ -/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ -/* - XIP_SECONDARY_SLOT_IMAGE = 1; -*/ - -QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); -OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); -OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); - -/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ -__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); - -ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; -ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; -DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; -DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; -NS_OFFSET_START = DEFINED(NS_OFFSET_START) ? NS_OFFSET_START : 0; -NS_IMAGE_OFFSET = DEFINED(PROJECT_NONSECURE) ? NS_OFFSET_START : 0; -RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; -RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; -RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; -RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; - -OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; - -/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. - * Bootloader images do not configure option settings because they are owned by the bootloader. - * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ -__bl_FSP_BOOTABLE_IMAGE = 1; -__bln_FSP_BOOTABLE_IMAGE = 1; -PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); -USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); - -__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : - FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; -__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; -__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; -__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; -__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; -__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : - __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; -__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : - __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH; -__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : - RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; -__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : - __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; -__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : - __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; -__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START; -__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : - FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : - FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; - -XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; -FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : - XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : - FLASH_IMAGE_START; -LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : - DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : - FLASH_LENGTH; - -/* Define memory regions. */ -MEMORY -{ - ITCM (rx) : ORIGIN = ITCM_START + NS_IMAGE_OFFSET, LENGTH = ITCM_LENGTH - DTCM (rwx) : ORIGIN = DTCM_START + NS_IMAGE_OFFSET, LENGTH = DTCM_LENGTH - FLASH (rx) : ORIGIN = FLASH_ORIGIN + NS_IMAGE_OFFSET, LENGTH = LIMITED_FLASH_LENGTH - RAM (rwx) : ORIGIN = RAM_START + NS_IMAGE_OFFSET, LENGTH = RAM_LENGTH - DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START + NS_IMAGE_OFFSET, LENGTH = DATA_FLASH_LENGTH - QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH - OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH - OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH - OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH - OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH - SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH - OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_LENGTH - OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = 0x18 - OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET + 0x34, LENGTH = OPTION_SETTING_LENGTH - 0x34 - OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_S_LENGTH - ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH -} - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be DEFINED in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - * __qspi_flash_start__ - * __qspi_flash_end__ - * __qspi_flash_code_size__ - * __qspi_region_max_size__ - * __qspi_region_start_address__ - * __qspi_region_end_address__ - * __ospi_device_0_start__ - * __ospi_device_0_end__ - * __ospi_device_0_code_size__ - * __ospi_device_0_region_max_size__ - * __ospi_device_0_region_start_address__ - * __ospi_device_0_region_end_address__ - * __ospi_device_1_start__ - * __ospi_device_1_end__ - * __ospi_device_1_code_size__ - * __ospi_device_1_region_max_size__ - * __ospi_device_1_region_start_address__ - * __ospi_device_1_region_end_address__ - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - /* Initialized ITCM data. */ - .itcm_data : - { - /* Start of ITCM Secure Trustzone region. */ - __tz_ITCM_S = ABSOLUTE(ITCM_START); - - /* All ITCM data start */ - __itcm_data_start__ = .; - - KEEP(*(.itcm_data*)) - - /* All ITCM data end */ - __itcm_data_end__ = .; - - /* - * Start of the ITCM Non-Secure Trustzone region. - * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. - */ - __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end__, 8192); - } > ITCM - - .text : - { - __tz_FLASH_S = ABSOLUTE(FLASH_START); - __ROM_Start = .; - - /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much - * space because ROM registers are at address 0x400 and there is very little space - * in between. */ - KEEP(*(.fixed_vectors*)) - KEEP(*(.application_vectors*)) - __Vectors_End = .; - - /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ - . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; - KEEP(*(.rom_registers*)) - - /* Reserving 0x100 bytes of space for ROM registers. */ - . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; - - /* Allocate flash write-boundary-aligned - * space for sce9 wrapped public keys for mcuboot if the module is used. - */ - . = ALIGN(128); - KEEP(*(.mcuboot_sce9_key*)) - - *(.text*) - - KEEP(*(.version)) - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - __usb_dev_descriptor_start_fs = .; - KEEP(*(.usb_device_desc_fs*)) - __usb_cfg_descriptor_start_fs = .; - KEEP(*(.usb_config_desc_fs*)) - __usb_interface_descriptor_start_fs = .; - KEEP(*(.usb_interface_desc_fs*)) - __usb_descriptor_end_fs = .; - __usb_dev_descriptor_start_hs = .; - KEEP(*(.usb_device_desc_hs*)) - __usb_cfg_descriptor_start_hs = .; - KEEP(*(.usb_config_desc_hs*)) - __usb_interface_descriptor_start_hs = .; - KEEP(*(.usb_interface_desc_hs*)) - __usb_descriptor_end_hs = .; - - KEEP(*(.eh_frame*)) - - __ROM_End = .; - } > FLASH = 0xFF - - __Vectors_Size = __Vectors_End - __Vectors; - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - __tz_RAM_S = ORIGIN(RAM); - - /* If DTC is used, put the DTC vector table at the start of SRAM. - This avoids memory holes due to 1K alignment required by it. */ - .fsp_dtc_vector_table (NOLOAD) : - { - . = ORIGIN(RAM); - *(.fsp_dtc_vector_table) - } > RAM - - /* Initialized data section. */ - .data : - { - __data_start__ = .; - . = ALIGN(4); - - __Code_In_RAM_Start = .; - - KEEP(*(.code_in_ram*)) - __Code_In_RAM_End = .; - - *(vtable) - /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ - *(.data.*) - *(.data) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - - . = ALIGN(4); - - /* All data end */ - __data_end__ = .; - - } > RAM AT > FLASH - - /* Start address of the initial values for .dtcm_data. */ - __dtcm_data_init_start = __etext + __data_end__ - __data_start__; - - /* Initialized DTCM data. */ - .dtcm_data : - { - /* Start of DTCM Secure Trustzone region. */ - __tz_DTCM_S = ABSOLUTE(DTCM_START); - - /* Initialized DTCM data start */ - __dtcm_data_start__ = .; - - KEEP(*(.dtcm_data*)) - - /* Initialized DTCM data end */ - __dtcm_data_end__ = .; - } > DTCM AT > FLASH - - /* Uninitialized DTCM data. */ - .dtcm_noinit (NOLOAD): - { - /* Uninitialized DTCM data start */ - __dtcm_noinit_start = .; - - KEEP(*(.dtcm_noinit*)) - - /* Uninitialized DTCM data end */ - __dtcm_noinit_end = .; - - /* - * Start of the DTCM Non-Secure Trustzone region. - * DTCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. - */ - __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_noinit_end, 8192); - } > DTCM - - /* TrustZone Secure Gateway Stubs Section. */ - - /* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */ - /* 1. Get the address to the next block after the .data section in FLASH. */ - DATA_END = LOADADDR(.data) + SIZEOF(.data); - /* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */ - SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024); - /* 3. Manually specify the start location for .gnu.sgstubs */ - .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) - { - __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); - _start_sg = .; - *(.gnu.sgstubs*) - . = ALIGN(32); - _end_sg = .; - } > FLASH - - __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); - FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); - - /* QSPI_FLASH section to be downloaded via debugger */ - .qspi_flash : - { - __qspi_flash_start__ = .; - KEEP(*(.qspi_flash*)) - KEEP(*(.code_in_qspi*)) - __qspi_flash_end__ = .; - } > QSPI_FLASH - __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; - - /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ - __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); - .qspi_non_retentive : AT (__qspi_flash_code_addr__) - { - __qspi_non_retentive_start__ = .; - KEEP(*(.qspi_non_retentive*)) - __qspi_non_retentive_end__ = .; - } > QSPI_FLASH - __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; - - __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ - __qspi_region_start_address__ = __qspi_flash_start__; - __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; - - /* Support for OctaRAM */ - .OSPI_DEVICE_0_NO_LOAD (NOLOAD): - { - . = ALIGN(4); - __ospi_device_0_start__ = .; - *(.ospi_device_0_no_load*) - . = ALIGN(4); - __ospi_device_0_end__ = .; - } > OSPI_DEVICE_0_RAM - - .OSPI_DEVICE_1_NO_LOAD (NOLOAD): - { - . = ALIGN(4); - __ospi_device_1_start__ = .; - *(.ospi_device_1_no_load*) - . = ALIGN(4); - __ospi_device_1_end__ = .; - } > OSPI_DEVICE_1_RAM - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); - - /* OSPI_DEVICE_0 section to be downloaded via debugger */ - .OSPI_DEVICE_0 : - { - __ospi_device_0_start__ = .; - KEEP(*(.ospi_device_0*)) - KEEP(*(.code_in_ospi_device_0*)) - __ospi_device_0_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; - - /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) - { - __ospi_device_0_non_retentive_start__ = .; - KEEP(*(.ospi_device_0_non_retentive*)) - __ospi_device_0_non_retentive_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; - - __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_0_region_start_address__ = __ospi_device_0_start__; - __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); - - /* OSPI_DEVICE_1 section to be downloaded via debugger */ - .OSPI_DEVICE_1 : - { - __ospi_device_1_start__ = .; - KEEP(*(.ospi_device_1*)) - KEEP(*(.code_in_ospi_device_1*)) - __ospi_device_1_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; - - /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) - { - __ospi_device_1_non_retentive_start__ = .; - KEEP(*(.ospi_device_1_non_retentive*)) - __ospi_device_1_non_retentive_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; - - __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_1_region_start_address__ = __ospi_device_1_start__; - __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; - - .noinit (NOLOAD): - { - . = ALIGN(4); - __noinit_start = .; - KEEP(*(.noinit*)) - . = ALIGN(8); - /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ - KEEP(*(.heap.*)) - __noinit_end = .; - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (NOLOAD): - { - . = ALIGN(8); - __HeapBase = .; - PROVIDE(end = .); - /* Place the STD heap here. */ - KEEP(*(.heap)) - __HeapLimit = .; - } > RAM - - /* Stacks are stored in this section. */ - .stack_dummy (NOLOAD): - { - . = ALIGN(8); - __StackLimit = .; - /* Main stack */ - KEEP(*(.stack)) - __StackTop = .; - /* Thread stacks */ - KEEP(*(.stack*)) - __StackTopAll = .; - } > RAM - - PROVIDE(__stack = __StackTopAll); - - /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used - at run time for things such as ThreadX memory pool allocations. */ - __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); - - /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. - * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); - - /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. - * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not - * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); - - /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. - * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ - .ns_buffer (NOLOAD): - { - /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ - . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; - - KEEP(*(.ns_buffer*)) - } > RAM - - /* Data flash. */ - .data_flash : - { - . = ORIGIN(DATA_FLASH); - __tz_DATA_FLASH_S = .; - __Data_Flash_Start = .; - KEEP(*(.data_flash*)) - __Data_Flash_End = .; - - __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); - } > DATA_FLASH - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_S = ORIGIN(SDRAM); - - /* SDRAM */ - .sdram (NOLOAD): - { - __SDRAM_Start = .; - KEEP(*(.sdram*)) - KEEP(*(.frame*)) - __SDRAM_End = .; - } > SDRAM - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_N = __SDRAM_End; - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_S = ORIGIN(ID_CODE); - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. - * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE - * memory region between TrustZone projects. */ - __tz_ID_CODE_N = __tz_ID_CODE_S; - - .id_code : - { - __ID_Code_Start = .; - KEEP(*(.id_code*)) - __ID_Code_End = .; - } > ID_CODE - - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); - - .option_setting_ofs : - { - __OPTION_SETTING_OFS_Start = .; - KEEP(*(.option_setting_ofs0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; - KEEP(*(.option_setting_ofs2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; - KEEP(*(.option_setting_dualsel)) - __OPTION_SETTING_OFS_End = .; - } > OPTION_SETTING_OFS = 0xFF - - .option_setting_sas : - { - __OPTION_SETTING_SAS_Start = .; - KEEP(*(.option_setting_sas)) - __OPTION_SETTING_SAS_End = .; - } > OPTION_SETTING_SAS = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); - - .option_setting_ns : - { - __OPTION_SETTING_NS_Start = .; - KEEP(*(.option_setting_ofs1)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_ofs3)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_banksel)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps0)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps1)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps2)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps3)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps0)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps1)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps2)) - . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps3)) - __OPTION_SETTING_NS_End = .; - } > OPTION_SETTING = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); - - .option_setting_s : - { - __OPTION_SETTING_S_Start = .; - KEEP(*(.option_setting_ofs1_sec)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs3_sec)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sec)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec1)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec3)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec1)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec3)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs1_sel)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs3_sel)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sel)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel0)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel1)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel2)) - . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel3)) - __OPTION_SETTING_S_End = .; - } > OPTION_SETTING_S = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; -} diff --git a/hw/bsp/ra/linker/gcc/ra2a1.ld b/hw/bsp/ra/linker/gcc/ra2a1.ld deleted file mode 100644 index 218acbb2a..000000000 --- a/hw/bsp/ra/linker/gcc/ra2a1.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra4m1.ld b/hw/bsp/ra/linker/gcc/ra4m1.ld deleted file mode 100644 index 218acbb2a..000000000 --- a/hw/bsp/ra/linker/gcc/ra4m1.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra4m3.ld b/hw/bsp/ra/linker/gcc/ra4m3.ld deleted file mode 100644 index 7b3a63fbe..000000000 --- a/hw/bsp/ra/linker/gcc/ra4m3.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x20000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x100000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra6m1.ld b/hw/bsp/ra/linker/gcc/ra6m1.ld deleted file mode 100644 index 91d27f74c..000000000 --- a/hw/bsp/ra/linker/gcc/ra6m1.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x1FFE0000; -RAM_LENGTH = 0x40000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x80000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x0100A150; -ID_CODE_LENGTH = 0x10; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra6m5.ld b/hw/bsp/ra/linker/gcc/ra6m5.ld deleted file mode 100644 index af747fd9b..000000000 --- a/hw/bsp/ra/linker/gcc/ra6m5.ld +++ /dev/null @@ -1,22 +0,0 @@ -RAM_START = 0x20000000; -RAM_LENGTH = 0x80000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x200000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x68000000; -OSPI_DEVICE_0_LENGTH = 0x8000000; -OSPI_DEVICE_1_START = 0x70000000; -OSPI_DEVICE_1_LENGTH = 0x10000000; - -INCLUDE fsp.ld -- cgit v1.3.1 From 4b39ecc519735e5d4d2d9bfda7f24ae39faab077 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Dec 2024 08:53:54 +0700 Subject: update make build for ra --- hw/bsp/ra/boards/portenta_c33/board.mk | 2 -- hw/bsp/ra/boards/uno_r4/board.mk | 2 -- hw/bsp/ra/family.cmake | 2 +- hw/bsp/ra/family.mk | 16 +++++++++------- 4 files changed, 10 insertions(+), 12 deletions(-) (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/portenta_c33/board.mk b/hw/bsp/ra/boards/portenta_c33/board.mk index 6a5c2ffce..4da34306e 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.mk +++ b/hw/bsp/ra/boards/portenta_c33/board.mk @@ -1,8 +1,6 @@ CPU_CORE = cortex-m33 MCU_VARIANT = ra6m5 -LD_FILE = ${BOARD_PATH}/${BOARD}.ld - # Port 1 is highspeed PORT ?= 1 diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk index b7075eec0..f257c0000 100644 --- a/hw/bsp/ra/boards/uno_r4/board.mk +++ b/hw/bsp/ra/boards/uno_r4/board.mk @@ -1,8 +1,6 @@ CPU_CORE = cortex-m4 MCU_VARIANT = ra4m1 -LD_FILE = ${BOARD_PATH}/${BOARD}.ld - # For flash-jlink target JLINK_DEVICE = R7FA4M1AB diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 56c0487c1..e234c7b16 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -36,8 +36,8 @@ function(add_board_target BOARD_TARGET) ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c ${FSP_RA}/src/bsp/mcu/all/bsp_security.c ${FSP_RA}/src/r_ioport/r_ioport.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/pin_data.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/common_data.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/ra_gen/pin_data.c ) target_compile_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 4447e8499..5c7305912 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -1,5 +1,3 @@ -DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5 - FSP_RA = hw/mcu/renesas/fsp/ra/fsp include $(TOP)/$(BOARD_PATH)/board.mk @@ -37,6 +35,8 @@ SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ src/portable/renesas/rusb2/rusb2_common.c \ + ${BOARD_PATH}/ra_gen/common_data.c \ + ${BOARD_PATH}/ra_gen/pin_data.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \ $(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \ @@ -53,10 +53,11 @@ SRC_C += \ $(FSP_RA)/src/r_ioport/r_ioport.c \ INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(BOARD_PATH)/fsp_cfg \ - $(TOP)/$(BOARD_PATH)/fsp_cfg/bsp \ + $(TOP)/$(BOARD_PATH)/ra_cfg/fsp_cfg \ + $(TOP)/$(BOARD_PATH)/ra_cfg/fsp_cfg/bsp \ + $(TOP)/$(BOARD_PATH)/ra_gen \ + $(TOP)/lib/CMSIS_6/CMSIS/Core/Include \ $(TOP)/$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Include \ $(TOP)/$(FSP_RA)/inc \ $(TOP)/$(FSP_RA)/inc/api \ @@ -65,10 +66,11 @@ INC += \ $(TOP)/$(FSP_RA)/src/bsp/mcu/$(MCU_VARIANT) \ ifndef LD_FILE -LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld +LD_FILE = $(BOARD_PATH)/script/fsp.ld endif -LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc +LDFLAGS += -L$(TOP)/$(BOARD_PATH)/script +LDFLAGS += -Wl,--defsym=end=__bss_end__ # For freeRTOS port source # hack to use the port provided by renesas -- cgit v1.3.1 From c79890c3597dabbe94340542a8c5c7cd168d8aa0 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Dec 2024 12:50:51 +0700 Subject: ra8m1_ek led and button works --- hw/bsp/ra/boards/ra6m5_ek/board.cmake | 2 +- hw/bsp/ra/boards/ra8m1_ek/board.cmake | 8 + hw/bsp/ra/boards/ra8m1_ek/board.h | 42 ++ .../boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h | 62 ++ .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 + .../ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 526 +++++++++++++ .../ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 127 ++++ .../boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h | 13 + hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h | 56 ++ hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c | 11 + hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h | 20 + hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c | 275 +++++++ hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld | 820 +++++++++++++++++++++ hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld | 30 + .../ra8m1_ek/smart_configurator/configuration.xml | 6 +- 16 files changed, 2010 insertions(+), 4 deletions(-) create mode 100644 hw/bsp/ra/boards/ra8m1_ek/board.cmake create mode 100644 hw/bsp/ra/boards/ra8m1_ek/board.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c create mode 100644 hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld create mode 100644 hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index 2adf6e744..a8220c9c7 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -2,7 +2,7 @@ set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) -set(JLINK_OPTION "-USB 000831915224") +#set(JLINK_OPTION "-USB 000831915224") # Device port default to PORT1 Highspeed if (NOT DEFINED PORT) diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.cmake b/hw/bsp/ra/boards/ra8m1_ek/board.cmake new file mode 100644 index 000000000..ae5d1d5bb --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/board.cmake @@ -0,0 +1,8 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m85 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra8m1) + +set(JLINK_DEVICE R7FA8M1AH) +#set(JLINK_OPTION "-USB 001083115236") + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.h b/hw/bsp/ra/boards/ra8m1_ek/board.h new file mode 100644 index 000000000..33dda99b4 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/board.h @@ -0,0 +1,42 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_STATE_ON 1 +#define BUTTON_STATE_ACTIVE 0 + + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..90afbdef3 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + + #include "bsp_clock_cfg.h" + #include "bsp_mcu_family_cfg.h" + #include "board_cfg.h" + #define RA_NOT_DEFINED 0 + #ifndef BSP_CFG_RTOS + #if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else + #define BSP_CFG_RTOS (0) + #endif + #endif + #ifndef BSP_CFG_RTC_USED + #define BSP_CFG_RTC_USED (RA_NOT_DEFINED) + #endif + #undef RA_NOT_DEFINED + #if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif + #define BSP_CFG_MCU_VCC_MV (3300) + #define BSP_CFG_STACK_MAIN_BYTES (0x1000) + #define BSP_CFG_HEAP_BYTES (0x1000) + #define BSP_CFG_PARAM_CHECKING_ENABLE (0) + #define BSP_CFG_ASSERT (0) + #define BSP_CFG_ERROR_LOG (0) + + #define BSP_CFG_PFS_PROTECT ((1)) + + #define BSP_CFG_C_RUNTIME_INIT ((1)) + #define BSP_CFG_EARLY_INIT ((0)) + + #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED + #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) + #endif + + #ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE + #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE + #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED + #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) + #endif + #ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS + #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + #endif + + #ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..92e7ddcdb --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (8) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..a22da075d --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA8M1AHECBD + #define BSP_MCU_FEATURE_SET ('A') + #define BSP_ROM_SIZE_BYTES (2064384) + #define BSP_RAM_SIZE_BYTES (917504) + #define BSP_DATA_FLASH_SIZE_BYTES (12288) + #define BSP_PACKAGE_BGA + #define BSP_PACKAGE_PINS (224) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..94f09c61f --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,526 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#include "bsp_mcu_device_pn_cfg.h" + #include "bsp_mcu_device_cfg.h" + #include "../../../ra/fsp/src/bsp/mcu/ra8m1/bsp_override.h" + #include "../../../ra/fsp/src/bsp/mcu/ra8m1/bsp_mcu_info.h" + #include "bsp_clock_cfg.h" + #define BSP_MCU_GROUP_RA8M1 (1) + #define BSP_LOCO_HZ (32768) + #define BSP_MOCO_HZ (8000000) + #define BSP_SUB_CLOCK_HZ (0) + #if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (16000000) + #elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 7 + #define BSP_HOCO_HZ (48000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + + #define BSP_CFG_FLL_ENABLE (0) + + #define BSP_CFG_CLOCK_SETTLING_DELAY_ENABLE (1) + #define BSP_CFG_SLEEP_MODE_DELAY_ENABLE (1) + #define BSP_CFG_MSTP_CHANGE_DELAY_ENABLE (1) + #define BSP_CFG_RTOS_IDLE_SLEEP (0) + #define BSP_CFG_CLOCK_SETTLING_DELAY_US (150) + + #if defined(BSP_PACKAGE_LQFP) && (BSP_PACKAGE_PINS == 100) + #define BSP_MAX_CLOCK_CHANGE_THRESHOLD (180000000U) + #elif defined(BSP_PACKAGE_LQFP) + #define BSP_MAX_CLOCK_CHANGE_THRESHOLD (200000000U) + #else + #define BSP_MAX_CLOCK_CHANGE_THRESHOLD (240000000U) + #endif + + #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) + #define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + #define BSP_CFG_INLINE_IRQ_FUNCTIONS (1) + + #if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (0) + #endif + + /* TrustZone Settings */ + #define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) + #define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) + #define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + + /* CMSIS TrustZone Settings */ + #define SCB_CSR_AIRCR_INIT (1) + #define SCB_AIRCR_BFHFNMINS_VAL (0) + #define SCB_AIRCR_SYSRESETREQS_VAL (1) + #define SCB_AIRCR_PRIS_VAL (0) + #define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL + #define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL + #define FPU_FPCCR_TS_VAL (1U) +#endif + #define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL + #define FPU_FPCCR_CLRONRET_VAL (1) +#endif + + /* Type 1 Peripheral Security Attribution */ + + /* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4) /* I3C */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* USBHS */ | \ + (1 << 15) /* ETHERC/EDMAC */ | \ + (1 << 16) /* OSPI */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */) +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7) /* SSIE1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* SDHI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* CEU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* CANFD1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* CANFD0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* RSIP-E51A */) +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC121 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC120 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC120 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* ACMPHS1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* ACMPHS0 */) +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* ULPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* ULPT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* GPT13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* GPT12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* GPT11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 21) /* GPT10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */) +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* DTC_DMAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* ELC */) +#endif + + /* Type 2 Peripheral Security Attribution */ + + /* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0x00000007U) +#endif + + /* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR + /* The LVD driver needs to access both channels. This means that the security attribution for both channels must be the same. */ +#if (RA_NOT_DEFINED > 0) || (RA_NOT_DEFINED > 0) +#define BSP_TZ_CFG_LVDSAR (0U) +#else +#define BSP_TZ_CFG_LVDSAR (3U) +#endif +#endif + + /* Security attribution for LPM registers. + * - OPCCR based on clock security. + * - Set remaining registers based on LPM security. + */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? BSP_CFG_CLOCKS_SECURE == 0 : (\ + 0x002E0106U | \ + (BSP_CFG_CLOCKS_SECURE == 0))) +#endif + /* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0U : 0xAF1FFFFFU) +#endif + /* RAM Standby Control Security Attribution Register. */ +#ifndef BSP_TZ_CFG_RSCSAR +#define BSP_TZ_CFG_RSCSAR ((RA_NOT_DEFINED > 0) ? 0U : 0x00037FFFU) +#endif + + /* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0x047F3BFDU) +#endif +#endif + + /* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#if 0 +#define BSP_TZ_CFG_BBFSAR (0U) +#else +#define BSP_TZ_CFG_BBFSAR (0x1FU) +#endif +#endif + + /* Security attribution for Battery Backup registers (VBTBKRn). */ +#ifndef BSP_TZ_CFG_VBRSABAR +#if 0 +#define BSP_TZ_CFG_VBRSABAR (0xFFE0) +#else +#define BSP_TZ_CFG_VBRSABAR (0xED00) +#endif +#endif + + /* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */) +#endif + + /* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0U) /* Should match AIRCR.BFHFNMINS. */ +#endif + + /* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_DMACCHSAR +#define BSP_TZ_CFG_DMACCHSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */) +#endif + + /* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0U : 0xFF1D0000U) +#endif + + /* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0U : 0x00007F08U) +#endif + + /* Trusted Event Route Control Register for IELSR, DMAC.DELSR and ELC.ELSR. Note that currently Trusted Event Route Control is not supported. */ +#ifndef BSP_TZ_CFG_TEVTRCR +#define BSP_TZ_CFG_TEVTRCR (0) +#endif + + /* Security attribution register for ELCR, ELSEGR0, ELSEGR1 Security Attribution. */ +#ifndef BSP_TZ_CFG_ELCSARA + #define BSP_TZ_CFG_ELCSARA (0x00000007U) +#endif + + /* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED + #define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + + /* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#define BSP_TZ_CFG_FSAR (\ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 0) : 0U) | /* FLWTSA */\ + ((RA_NOT_DEFINED) > 0 ? 0U: (1U << 1)) | /* FCACHESA */\ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 8) : 0U) | /* FCKMHZSA */ \ + ((RA_NOT_DEFINED) > 0 ? 0U : (1U << 9U)) | /* FACICMISA */\ + ((RA_NOT_DEFINED) > 0 ? 0U: (1U << 10U)) /* FACICMRSA */) +#endif + + /* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ + #define BSP_TZ_CFG_SRAMSAR (\ + ((1U) << 0U) | /* SRAMSA0 */\ + ((1U) << 1U) | /* SRAMSA1 */\ + ((1U) << 7U) | /* STBRAMSA */\ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 8U) : 0U) /* SRAMWTSA */) +#endif + + /* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA + /* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ + #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_DMACCHSAR) +#endif + + /* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA + #define BSP_TZ_CFG_BUSSARA (1U) +#endif + /* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB + #define BSP_TZ_CFG_BUSSARB (1U) +#endif + /* Security Attribution Register C for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARC + #define BSP_TZ_CFG_BUSSARC (1U) +#endif + + /* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK + #define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + + + #define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) + #define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) + #define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) + #define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) + #define OFS_SEQ5 (1 << 28) | (1 << 30) + #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + + #define BSP_CFG_ROM_REG_OFS2 ((1 << 0) | 0xFFFFFFFEU) + + /* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0x00000000U | ((0U << 0U)) | ((0U << 3U)) | ((0U << 5U)) | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0xF00U : 0U) | ((0U << 24U)) | ((0U << 25U))) +#else + #define BSP_CFG_ROM_REG_OFS1_SEL (0x00000000U) +#endif +#endif + #define BSP_CFG_ROM_REG_OFS1_INITECCEN (0 << 25) + #define BSP_CFG_ROM_REG_OFS1 (0xFCFFFED0 | (1 << 3) | (7) | (1 << 5) | (1 << 8) | (1 << 24) | (BSP_CFG_ROM_REG_OFS1_INITECCEN)) + + /* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ + #define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + + /* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL + #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) +#endif + + /* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 + #define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif + /* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 + #define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif + /* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 + #define BSP_CFG_ROM_REG_BPS2 (~( 0U)) +#endif + /* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 + #define BSP_CFG_ROM_REG_BPS3 (~( 0U)) +#endif + /* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 + #define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif + /* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 + #define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif + /* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 + #define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) +#endif + /* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 + #define BSP_CFG_ROM_REG_PBPS3 (~( 0U)) +#endif + /* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 + #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif + /* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 + #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif + /* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 + #define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) +#endif + /* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 + #define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif + /* Security Attribution for Bank Select Register */ +#ifndef BSP_CFG_ROM_REG_BANKSEL_SEL + #define BSP_CFG_ROM_REG_BANKSEL_SEL (0xFFFFFFFFU) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT + #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + + /* FSBL Control Register 0 */ +#ifndef BSP_CFG_ROM_REG_FSBLCTRL0 +#define BSP_CFG_ROM_REG_FSBLCTRL0 ( \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLEN_Pos) | \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLSKIPSW_Pos) | \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLSKIPDS_Pos) | \ + (7 << R_OFS_DATAFLASH_FSBLCTRL0_FSBLCLK_Pos) | \ + 0xFFFFF000) +#endif + + /* FSBL Control Register 1 */ +#ifndef BSP_CFG_ROM_REG_FSBLCTRL1 +#define BSP_CFG_ROM_REG_FSBLCTRL1 ( \ + (3 << R_OFS_DATAFLASH_FSBLCTRL1_FSBLEXMD_Pos) | \ + 0xFFFFFFFC) +#endif + + /* FSBL Control Register 2 */ +#ifndef BSP_CFG_ROM_REG_FSBLCTRL2 +#define BSP_CFG_ROM_REG_FSBLCTRL2 ( \ + (15 << R_OFS_DATAFLASH_FSBLCTRL2_PORTPN_Pos) | \ + (0x1F << R_OFS_DATAFLASH_FSBLCTRL2_PORTGN_Pos) | \ + 0xFFFFFE00) +#endif + + /* Start Address of Code Certificate Register 0 */ +#ifndef BSP_CFG_ROM_REG_SACC0 +#define BSP_CFG_ROM_REG_SACC0 (0xFFFFFFFF) +#endif + + /* Start Address of Code Certificate Register 1 */ +#ifndef BSP_CFG_ROM_REG_SACC1 +#define BSP_CFG_ROM_REG_SACC1 (0xFFFFFFFF) +#endif + + /* Start Address of Measurement Report Register */ +#ifndef BSP_CFG_ROM_REG_SAMR +#define BSP_CFG_ROM_REG_SAMR (0xFFFFFFFF) +#endif + +#ifndef BSP_CFG_DCACHE_ENABLED +#define BSP_CFG_DCACHE_ENABLED (0) +#endif + + +#ifndef BSP_CFG_SDRAM_ENABLED + #define BSP_CFG_SDRAM_ENABLED (0) +#endif + +#ifndef BSP_CFG_SDRAM_TRAS + #define BSP_CFG_SDRAM_TRAS (6) +#endif + +#ifndef BSP_CFG_SDRAM_TRCD + #define BSP_CFG_SDRAM_TRCD (3) +#endif + +#ifndef BSP_CFG_SDRAM_TRP + #define BSP_CFG_SDRAM_TRP (3) +#endif + +#ifndef BSP_CFG_SDRAM_TWR + #define BSP_CFG_SDRAM_TWR (2) +#endif + +#ifndef BSP_CFG_SDRAM_TCL + #define BSP_CFG_SDRAM_TCL (3) +#endif + +#ifndef BSP_CFG_SDRAM_TRFC + #define BSP_CFG_SDRAM_TRFC (937) +#endif + +#ifndef BSP_CFG_SDRAM_TREFW + #define BSP_CFG_SDRAM_TREFW (8) +#endif + +#ifndef BSP_CFG_SDRAM_INIT_ARFI + #define BSP_CFG_SDRAM_INIT_ARFI (10) +#endif + +#ifndef BSP_CFG_SDRAM_INIT_ARFC + #define BSP_CFG_SDRAM_INIT_ARFC (8) +#endif + +#ifndef BSP_CFG_SDRAM_INIT_PRC + #define BSP_CFG_SDRAM_INIT_PRC (3) +#endif + +#ifndef BSP_CFG_SDRAM_MULTIPLEX_ADDR_SHIFT + #define BSP_CFG_SDRAM_MULTIPLEX_ADDR_SHIFT (1) +#endif + +#ifndef BSP_CFG_SDRAM_ENDIAN_MODE + #define BSP_CFG_SDRAM_ENDIAN_MODE (0) +#endif + +#ifndef BSP_CFG_SDRAM_ACCESS_MODE + #define BSP_CFG_SDRAM_ACCESS_MODE (1) +#endif + +#ifndef BSP_CFG_SDRAM_BUS_WIDTH + #define BSP_CFG_SDRAM_BUS_WIDTH (0) +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..883363437 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,127 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define ENET_RMII_INT (BSP_IO_PORT_00_PIN_00) +#define ARDUINO_A3 (BSP_IO_PORT_00_PIN_01) +#define GROVE2_AN102 (BSP_IO_PORT_00_PIN_02) +#define ARDUINO_A1 (BSP_IO_PORT_00_PIN_03) +#define ARDUINO_A0_MIKROBUS_AN000 (BSP_IO_PORT_00_PIN_04) +#define GROVE2_AN001 (BSP_IO_PORT_00_PIN_05) +#define PMOD1_IRQ11 (BSP_IO_PORT_00_PIN_06) +#define ARDUINO_A004 (BSP_IO_PORT_00_PIN_07) +#define USER_S2 (BSP_IO_PORT_00_PIN_08) +#define SW1 (BSP_IO_PORT_00_PIN_09) +#define MIKROBUS_IRQ14 (BSP_IO_PORT_00_PIN_10) +#define ARDUINO_A4 (BSP_IO_PORT_00_PIN_14) +#define ARDUINO_A5 (BSP_IO_PORT_00_PIN_15) +#define OSPI_DQ0 (BSP_IO_PORT_01_PIN_00) +#define OSPI_DQ3 (BSP_IO_PORT_01_PIN_01) +#define OSPI_DQ4 (BSP_IO_PORT_01_PIN_02) +#define OSPI_DQ2 (BSP_IO_PORT_01_PIN_03) +#define OSPI_CS (BSP_IO_PORT_01_PIN_04) +#define OSPI_INT (BSP_IO_PORT_01_PIN_05) +#define OSPI_RESET (BSP_IO_PORT_01_PIN_06) +#define LED3 (BSP_IO_PORT_01_PIN_07) +#define ETH_A_RMII_RMII_RXDV (BSP_IO_PORT_01_PIN_12) +#define ETH_A_LINKSTA (BSP_IO_PORT_01_PIN_14) +#define MPLX_CTRL (BSP_IO_PORT_01_PIN_15) +#define NMI (BSP_IO_PORT_02_PIN_00) +#define MD (BSP_IO_PORT_02_PIN_01) +#define CAN_STB (BSP_IO_PORT_02_PIN_07) +#define TDI (BSP_IO_PORT_02_PIN_08) +#define TDO (BSP_IO_PORT_02_PIN_09) +#define SWDIO (BSP_IO_PORT_02_PIN_10) +#define SWCLK (BSP_IO_PORT_02_PIN_11) +#define EXTAL (BSP_IO_PORT_02_PIN_12) +#define XTAL (BSP_IO_PORT_02_PIN_13) +#define ETH_A_RXER (BSP_IO_PORT_03_PIN_00) +#define ETH_A_RXD1 (BSP_IO_PORT_03_PIN_01) +#define ETH_A_RXD0 (BSP_IO_PORT_03_PIN_02) +#define ETH_A_REFCLK (BSP_IO_PORT_03_PIN_03) +#define ETH_A_TXD0 (BSP_IO_PORT_03_PIN_04) +#define ETH_A_TXD1 (BSP_IO_PORT_03_PIN_05) +#define ETH_A_TXEN (BSP_IO_PORT_03_PIN_06) +#define ETH_A_MDIO (BSP_IO_PORT_03_PIN_07) +#define ETH_A_MDC (BSP_IO_PORT_03_PIN_08) +#define ARDUINO_D0_MIKROBUS_RXD3 (BSP_IO_PORT_03_PIN_09) +#define ARDUINO_D1_MIKROBUS_TXD3 (BSP_IO_PORT_03_PIN_10) +#define CAN_RXD (BSP_IO_PORT_03_PIN_11) +#define CAN_TXD (BSP_IO_PORT_03_PIN_12) +#define I3C_SCL0_ARDUINO_MIKROBUS_PMOD1_3_qwiic (BSP_IO_PORT_04_PIN_00) +#define I3C_SDA0_ARDUINO_MIKROBUS_PMOD1_4_qwiic (BSP_IO_PORT_04_PIN_01) +#define ETH_B_MDIO (BSP_IO_PORT_04_PIN_02) +#define ETH_B_LINKSTA (BSP_IO_PORT_04_PIN_03) +#define ETH_B_RST_N (BSP_IO_PORT_04_PIN_04) +#define ETH_B_TXEN (BSP_IO_PORT_04_PIN_05) +#define ETH_B_TXD1 (BSP_IO_PORT_04_PIN_06) +#define USBFS_VBUS (BSP_IO_PORT_04_PIN_07) +#define USBHS_VBUSEN (BSP_IO_PORT_04_PIN_08) +#define USBHS_OVRCURA (BSP_IO_PORT_04_PIN_09) +#define MISOB_B_ARDUINO_MIKROBUS (BSP_IO_PORT_04_PIN_10) +#define MOSIB_B_ARDUINO_MIKROBUS (BSP_IO_PORT_04_PIN_11) +#define RSPCKB_B_ARDUINO_MIKROBUS (BSP_IO_PORT_04_PIN_12) +#define SSLB0_B_ARDUINO_D10_MIKROBUS (BSP_IO_PORT_04_PIN_13) +#define LED2 (BSP_IO_PORT_04_PIN_14) +#define USBFS_VBUS_EN (BSP_IO_PORT_05_PIN_00) +#define USBFS_OVERCURA (BSP_IO_PORT_05_PIN_01) +#define MIKROBUS_RESET (BSP_IO_PORT_05_PIN_02) +#define PMOD2_7_IRQ1 (BSP_IO_PORT_05_PIN_08) +#define GROVE2_IIC_SDA1 (BSP_IO_PORT_05_PIN_11) +#define GROVE2_IIC_SCL1 (BSP_IO_PORT_05_PIN_12) +#define LED1 (BSP_IO_PORT_06_PIN_00) +#define ARDUINO_D5 (BSP_IO_PORT_06_PIN_01) +#define ARDUINO_D6 (BSP_IO_PORT_06_PIN_02) +#define ARDUINO_D9 (BSP_IO_PORT_06_PIN_03) +#define PMOD1_3_MISO0_RXD0_SCL0 (BSP_IO_PORT_06_PIN_09) +#define PMOD1_2_MOSI0_TXD0 (BSP_IO_PORT_06_PIN_10) +#define PMOD1_4_SCK0 (BSP_IO_PORT_06_PIN_11) +#define PMOD1_1_SSL0_CTS_RTS (BSP_IO_PORT_06_PIN_12) +#define PMOD1_1_CTS0 (BSP_IO_PORT_06_PIN_13) +#define PMOD1_9_GPIO (BSP_IO_PORT_06_PIN_14) +#define PMOD1_10_GPIO (BSP_IO_PORT_06_PIN_15) +#define ETH_B_TXD0 (BSP_IO_PORT_07_PIN_00) +#define ETH_B_REFCLK (BSP_IO_PORT_07_PIN_01) +#define ETH_B_RXD0 (BSP_IO_PORT_07_PIN_02) +#define ETH_B_RXD1 (BSP_IO_PORT_07_PIN_03) +#define ETH_B_RXER (BSP_IO_PORT_07_PIN_04) +#define ETH_B_RMII_RXDV (BSP_IO_PORT_07_PIN_05) +#define I3C_SDA0_PULLUP (BSP_IO_PORT_07_PIN_11) +#define OSPI_DQ5 (BSP_IO_PORT_08_PIN_00) +#define OSPI_DS (BSP_IO_PORT_08_PIN_01) +#define OSPI_DQ6 (BSP_IO_PORT_08_PIN_02) +#define OSPI_DQ1 (BSP_IO_PORT_08_PIN_03) +#define OSPI_DQ7 (BSP_IO_PORT_08_PIN_04) +#define OSPI_CK (BSP_IO_PORT_08_PIN_08) +#define PMOD2_8_RESET (BSP_IO_PORT_08_PIN_09) +#define PMOD2_9_GPIO (BSP_IO_PORT_08_PIN_10) +#define PMOD2_10_GPIO (BSP_IO_PORT_08_PIN_11) +#define ARDUINO_RESET (BSP_IO_PORT_08_PIN_12) +#define USBFS_P (BSP_IO_PORT_08_PIN_14) +#define USBFS_N (BSP_IO_PORT_08_PIN_15) +#define ARDUINO_D4 (BSP_IO_PORT_09_PIN_05) +#define ARDUINO_D2 (BSP_IO_PORT_09_PIN_06) +#define ARDUINO_D3_MIKROBUS_GTIOC13A (BSP_IO_PORT_09_PIN_07) +#define ARDUINO_D7 (BSP_IO_PORT_09_PIN_08) +#define ARDUINO_D8 (BSP_IO_PORT_09_PIN_09) +#define PMOD2_3_MISO2_RXD2 (BSP_IO_PORT_10_PIN_02) +#define PMOD2_2_MOSI2_TXD2 (BSP_IO_PORT_10_PIN_03) +#define PMOD2_4_SCK2 (BSP_IO_PORT_10_PIN_04) +#define PMOD2_1_CTS_RTS_SSL2 (BSP_IO_PORT_10_PIN_05) +#define PMOD2_1_CTS2 (BSP_IO_PORT_10_PIN_06) +#define PMOD1_8_RESET (BSP_IO_PORT_10_PIN_08) +#define JLOB_COMS_TX (BSP_IO_PORT_10_PIN_14) +#define JLOB_COMS_RX (BSP_IO_PORT_10_PIN_15) +#define I3C_SCL0_PULLUP (BSP_IO_PORT_11_PIN_00) +#define USBHS_VBUS (BSP_IO_PORT_11_PIN_01) +extern const ioport_cfg_t g_bsp_pin_cfg; /* RA8M1 EK */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h new file mode 100644 index 000000000..d2688bf5b --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_cfg/fsp_cfg/r_ioport_cfg.h @@ -0,0 +1,13 @@ +/* generated configuration header file - do not edit */ +#ifndef R_IOPORT_CFG_H_ +#define R_IOPORT_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) + +#ifdef __cplusplus +} +#endif +#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h new file mode 100644 index 000000000..9f8c76144 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h @@ -0,0 +1,56 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (20000000) /* XTAL 20000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (7) /* HOCO 48MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(96,0) /* PLL Mul x80-99|Mul x96|PLL Mul x96.00 */ +#define BSP_CFG_PLL_FREQUENCY_HZ (960000000) /* PLL 960000000Hz */ +#define BSP_CFG_PLODIVP (BSP_CLOCKS_PLL_DIV_2) /* PLL1P Div /2 */ +#define BSP_CFG_PLL1P_FREQUENCY_HZ (480000000) /* PLL1P 480000000Hz */ +#define BSP_CFG_PLODIVQ (BSP_CLOCKS_PLL_DIV_2) /* PLL1Q Div /2 */ +#define BSP_CFG_PLL1Q_FREQUENCY_HZ (480000000) /* PLL1Q 480000000Hz */ +#define BSP_CFG_PLODIVR (BSP_CLOCKS_PLL_DIV_2) /* PLL1R Div /2 */ +#define BSP_CFG_PLL1R_FREQUENCY_HZ (480000000) /* PLL1R 480000000Hz */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL2 Disabled */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(96,0) /* PLL2 Mul x80-99|Mul x96|PLL2 Mul x96.00 */ +#define BSP_CFG_PLL2_FREQUENCY_HZ (0) /* PLL2 0Hz */ +#define BSP_CFG_PL2ODIVP (BSP_CLOCKS_PLL_DIV_2) /* PLL2P Div /2 */ +#define BSP_CFG_PLL2P_FREQUENCY_HZ (0) /* PLL2P 0Hz */ +#define BSP_CFG_PL2ODIVQ (BSP_CLOCKS_PLL_DIV_2) /* PLL2Q Div /2 */ +#define BSP_CFG_PLL2Q_FREQUENCY_HZ (0) /* PLL2Q 0Hz */ +#define BSP_CFG_PL2ODIVR (BSP_CLOCKS_PLL_DIV_2) /* PLL2R Div /2 */ +#define BSP_CFG_PLL2R_FREQUENCY_HZ (0) /* PLL2R 0Hz */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL1P) /* Clock Src: PLL1P */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_SCICLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* SCICLK Disabled */ +#define BSP_CFG_SPICLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* SPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_I3CCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* I3CCLK Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* UCK Disabled */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* U60CK Disabled */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CPUCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CPUCLK Div /1 */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKA Div /4 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_8) /* PCLKB Div /8 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_8) /* PCLKC Div /8 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKD Div /4 */ +#define BSP_CFG_PCLKE_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKE Div /2 */ +#define BSP_CFG_SDCLK_OUTPUT (1) /* SDCLK Enabled */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* BCLK Div /4 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_8) /* FCLK Div /8 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_SCICLK_DIV (BSP_CLOCKS_SCI_CLOCK_DIV_4) /* SCICLK Div /4 */ +#define BSP_CFG_SPICLK_DIV (BSP_CLOCKS_SPI_CLOCK_DIV_4) /* SPICLK Div /4 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_8) /* CANFDCLK Div /8 */ +#define BSP_CFG_I3CCLK_DIV (BSP_CLOCKS_I3C_CLOCK_DIV_3) /* I3CCLK Div /3 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* U60CK Div /5 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_4) /* OCTASPICLK Div /4 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c new file mode 100644 index 000000000..b92421739 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/pin_data.c @@ -0,0 +1,275 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_00_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_IRQ_ENABLE | (uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_00_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_00_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_ANALOG_ENABLE) + }, + { + .pin = BSP_IO_PORT_01_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_02_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_02_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_02_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_03_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_TRACE) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_04_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, + { + .pin = BSP_IO_PORT_04_PIN_10, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_13, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SPI) + }, + { + .pin = BSP_IO_PORT_04_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_05_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_05_PIN_11, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_MID | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_05_PIN_12, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_MID | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_IIC) + }, + { + .pin = BSP_IO_PORT_06_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_08_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HS_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_OSPI) + }, + { + .pin = BSP_IO_PORT_08_PIN_09, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_08_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_08_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_10_PIN_02, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_03, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_04, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_05, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI0_2_4_6_8) + }, + { + .pin = BSP_IO_PORT_10_PIN_06, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) + }, + { + .pin = BSP_IO_PORT_10_PIN_14, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_10_PIN_15, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_SCI1_3_5_7_9) + }, + { + .pin = BSP_IO_PORT_11_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif diff --git a/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld new file mode 100644 index 000000000..32cbf0b22 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld @@ -0,0 +1,820 @@ +/* + Linker File for Renesas FSP +*/ + +INCLUDE memory_regions.ld + +/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ +/* + XIP_SECONDARY_SLOT_IMAGE = 1; +*/ + +QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); +OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); +OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); + +/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ +__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0); + +ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0; +ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0; +DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0; +DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0; +RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; +RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; +RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; +RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; + +OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80; +OPTION_SETTING_DATA_FLASH_S_START = DEFINED(OPTION_SETTING_DATA_FLASH_S_START) ? OPTION_SETTING_DATA_FLASH_S_START : 0; +OPTION_SETTING_DATA_FLASH_S_LENGTH = DEFINED(OPTION_SETTING_DATA_FLASH_S_LENGTH) ? OPTION_SETTING_DATA_FLASH_S_LENGTH : 0; + +/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings. + * Bootloader images do not configure option settings because they are owned by the bootloader. + * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */ +__bl_FSP_BOOTABLE_IMAGE = 1; +__bln_FSP_BOOTABLE_IMAGE = 1; +PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE); +USE_OPTION_SETTING_DATA_FLASH = PROJECT_SECURE_OR_FLAT && (OPTION_SETTING_DATA_FLASH_S_LENGTH != 0); + +__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + (DEFINED(BOOTLOADER_SECONDARY_USE_QSPI) || DEFINED(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_FLASH_IMAGE_END = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH; +__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH; +__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH; +__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_IMAGE_END - FLASH_APPLICATION_NSC_LENGTH; +__bl_RAM_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH; +__bl_RAM_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : + __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH; +__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2; +__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START | (!DEFINED (NS_OFFSET_START) ? 0 : NS_OFFSET_START); +__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 : + FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END : + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2; + +XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0; +FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START : + XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : + FLASH_IMAGE_START; +LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH : + DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH : + FLASH_LENGTH; +OPTION_SETTING_SAS_SIZE = 0x34; +OPTION_SETTING_SAS_LENGTH = !DEFINED(OPTION_SETTING_LENGTH) ? 0 : + OPTION_SETTING_LENGTH == 0 ? 0 : + OPTION_SETTING_LENGTH - OPTION_SETTING_SAS_SIZE; + +/* Define memory regions. */ +MEMORY +{ + ITCM (rx) : ORIGIN = ITCM_START, LENGTH = ITCM_LENGTH + DTCM (rwx) : ORIGIN = DTCM_START, LENGTH = DTCM_LENGTH + FLASH (rx) : ORIGIN = FLASH_ORIGIN, LENGTH = LIMITED_FLASH_LENGTH + RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH + DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH + QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH + OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH + OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH + SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH + OPTION_SETTING (r) : ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH + OPTION_SETTING_OFS (r) : ORIGIN = OPTION_SETTING_START, LENGTH = 0x18 + OPTION_SETTING_SAS (r) : ORIGIN = OPTION_SETTING_START + OPTION_SETTING_SAS_SIZE, LENGTH = OPTION_SETTING_SAS_LENGTH + OPTION_SETTING_S (r) : ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH + OPTION_SETTING_DATA_FLASH_S (r) : ORIGIN = OPTION_SETTING_DATA_FLASH_S_START, LENGTH = OPTION_SETTING_DATA_FLASH_S_LENGTH + ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH +} + +/* Library configurations */ +GROUP(libgcc.a libc.a libm.a) + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be DEFINED in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __copy_table_start__ + * __copy_table_end__ + * __zero_table_start__ + * __zero_table_end__ + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + * __Vectors_End + * __Vectors_Size + * __qspi_flash_start__ + * __qspi_flash_end__ + * __qspi_flash_code_size__ + * __qspi_region_max_size__ + * __qspi_region_start_address__ + * __qspi_region_end_address__ + * __ospi_device_0_start__ + * __ospi_device_0_end__ + * __ospi_device_0_code_size__ + * __ospi_device_0_region_max_size__ + * __ospi_device_0_region_start_address__ + * __ospi_device_0_region_end_address__ + * __ospi_device_1_start__ + * __ospi_device_1_end__ + * __ospi_device_1_code_size__ + * __ospi_device_1_region_max_size__ + * __ospi_device_1_region_start_address__ + * __ospi_device_1_region_end_address__ + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + __tz_FLASH_S = ABSOLUTE(FLASH_START); + __ROM_Start = .; + + /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much + * space because ROM registers are at address 0x400 and there is very little space + * in between. */ + KEEP(*(.fixed_vectors*)) + KEEP(*(.application_vectors*)) + __Vectors_End = .; + + /* Some devices have a gap of code flash between the vector table and ROM Registers. + * The flash gap section allows applications to place code and data in this section. */ + *(.flash_gap*) + + /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; + KEEP(*(.rom_registers*)) + + /* Allocate flash write-boundary-aligned + * space for sce9 wrapped public keys for mcuboot if the module is used. + */ + KEEP(*(.mcuboot_sce9_key*)) + + *(.text*) + + KEEP(*(.version)) + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + __usb_dev_descriptor_start_fs = .; + KEEP(*(.usb_device_desc_fs*)) + __usb_cfg_descriptor_start_fs = .; + KEEP(*(.usb_config_desc_fs*)) + __usb_interface_descriptor_start_fs = .; + KEEP(*(.usb_interface_desc_fs*)) + __usb_descriptor_end_fs = .; + __usb_dev_descriptor_start_hs = .; + KEEP(*(.usb_device_desc_hs*)) + __usb_cfg_descriptor_start_hs = .; + KEEP(*(.usb_config_desc_hs*)) + __usb_interface_descriptor_start_hs = .; + KEEP(*(.usb_interface_desc_hs*)) + __usb_descriptor_end_hs = .; + + KEEP(*(.eh_frame*)) + + __ROM_End = .; + } > FLASH = 0xFF + + __Vectors_Size = __Vectors_End - __Vectors; + + . = .; + __itcm_data_pre_location = .; + + /* Initialized ITCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .itcm_data : ALIGN(16) + { + /* Start of ITCM Secure Trustzone region. */ + __tz_ITCM_S = ABSOLUTE(ITCM_START); + + /* All ITCM data start */ + __itcm_data_start = .; + + KEEP(*(.itcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* All ITCM data end */ + __itcm_data_end = .; + + /* + * Start of the ITCM Non-Secure Trustzone region. + * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects. + */ + __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end, 8192); + } > ITCM AT > FLASH = 0x00 + + /* Addresses exported for ITCM initialization. */ + __itcm_data_init_start = LOADADDR(.itcm_data); + __itcm_data_init_end = LOADADDR(.itcm_data) + SIZEOF(.itcm_data); + + ASSERT(ORIGIN(ITCM) % 8 == 0, "ITCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(ITCM) % 8 == 0, "ITCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.itcm_data) % 16 == 0, ".itcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.itcm_data) % 8 == 0, ".itcm_data section size must be a multiple of 8 bytes.") + + /* Restore location counter. */ + /* If ITCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If ITCM is present, this will be the absolute address that follows the ITCM ROM location. */ + . = (SIZEOF(.itcm_data) > 0) ? __itcm_data_init_end : __itcm_data_pre_location; + + __exidx_start = .; + /DISCARD/ : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } + __exidx_end = .; + + /* To copy multiple ROM to RAM sections, + * uncomment .copy.table section and, + * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ + /* + .copy.table : + { + . = ALIGN(4); + __copy_table_start__ = .; + LONG (__etext) + LONG (__data_start__) + LONG (__data_end__ - __data_start__) + LONG (__etext2) + LONG (__data2_start__) + LONG (__data2_end__ - __data2_start__) + __copy_table_end__ = .; + } > FLASH + */ + + /* To clear multiple BSS sections, + * uncomment .zero.table section and, + * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ + /* + .zero.table : + { + . = ALIGN(4); + __zero_table_start__ = .; + LONG (__bss_start__) + LONG (__bss_end__ - __bss_start__) + LONG (__bss2_start__) + LONG (__bss2_end__ - __bss2_start__) + __zero_table_end__ = .; + } > FLASH + */ + + __etext = .; + + __tz_RAM_S = ORIGIN(RAM); + + /* If DTC is used, put the DTC vector table at the start of SRAM. + This avoids memory holes due to 1K alignment required by it. */ + .fsp_dtc_vector_table (NOLOAD) : + { + . = ORIGIN(RAM); + *(.fsp_dtc_vector_table) + } > RAM + + /* Initialized data section. */ + .data : + { + __data_start__ = .; + . = ALIGN(4); + + __Code_In_RAM_Start = .; + + KEEP(*(.code_in_ram*)) + __Code_In_RAM_End = .; + + *(vtable) + /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ + *(.data.*) + *(.data) + + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + KEEP(*(.jcr*)) + + . = ALIGN(4); + + /* All data end */ + __data_end__ = .; + + } > RAM AT > FLASH + + . = .; + __dtcm_data_pre_location = LOADADDR(.data) + SIZEOF(.data); + + /* Initialized DTCM data. */ + /* Aligned to FCACHE2 for RA8. */ + .dtcm_data : ALIGN(16) + { + /* Start of DTCM Secure Trustzone region. */ + __tz_DTCM_S = ABSOLUTE(DTCM_START); + + /* Initialized DTCM data start */ + __dtcm_data_start = .; + + KEEP(*(.dtcm_data*)) + + /* Pad to eight byte alignment in case of ECC initialization. Fill zero. */ + . = ALIGN(8); + + /* Initialized DTCM data end */ + __dtcm_data_end = .; + } > DTCM AT > FLASH = 0x00 + + . = __dtcm_data_end; + /* Uninitialized DTCM data. */ + /* ALIGN appears on the left side of the colon because it is being used to assign the VMA directly, as opposed to a right side appearance which would control the LMA. */ + .dtcm_bss ALIGN(8) (NOLOAD) : + { + /* Uninitialized DTCM data start */ + __dtcm_bss_start = .; + + KEEP(*(.dtcm_bss*)) + + /* Pad to eight byte alignment in case of ECC initialization. No fill because of NOLOAD. */ + . = ALIGN(8); + + /* Uninitialized DTCM data end */ + __dtcm_bss_end = .; + + /* + * Start of the DTCM Non-Secure Trustzone region. + * DTCM_NS_START can be used to set a fixed address for non-secure DTCM in secure projects or flat projects. + */ + __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_bss_end, 8192); + } > DTCM + + /* Addresses exported for DTCM initialization. */ + __dtcm_data_init_start = LOADADDR(.dtcm_data); + __dtcm_data_init_end = LOADADDR(.dtcm_data) + SIZEOF(.dtcm_data); + + ASSERT(ORIGIN(DTCM) % 8 == 0, "DTCM memory region origin must be aligned to 8 bytes.") + ASSERT(LENGTH(DTCM) % 8 == 0, "DTCM memory region length must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) == ADDR(.dtcm_bss), ".dtcm_bss has (VMA != LMA) but should be NOLOAD (VMA == LMA).") + ASSERT(LOADADDR(.dtcm_data) % 16 == 0, ".dtcm_data section must be aligned to 16 bytes.") + ASSERT(SIZEOF(.dtcm_data) % 8 == 0, ".dtcm_data section size must be a multiple of 8 bytes.") + ASSERT(LOADADDR(.dtcm_bss) % 8 == 0, ".dtcm_bss section must be aligned to 8 bytes.") + ASSERT(SIZEOF(.dtcm_bss) % 8 == 0, ".dtcm_bss section size must be a multiple of 8 bytes.") + ASSERT(__dtcm_bss_start == __dtcm_data_end, ".dtcm_bss section is not adjacent to .dtcm_data section.") + + /* Restore location counter. */ + /* If DTCM is not present, this will be the address stored in '.' before ALIGN was attempted. */ + /* If DTCM is present, this will be the absolute address that follows the DTCM ROM location. */ + . = (SIZEOF(.dtcm_data) > 0) ? __dtcm_data_init_end : __dtcm_data_pre_location; + + /* TrustZone Secure Gateway Stubs Section */ + + /* Store location counter for SPI non-retentive sections. */ + sgstubs_pre_location = .; + + /* Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block. */ + SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); + .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024) + { + __FLASH_NSC_START = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); + _start_sg = .; + *(.gnu.sgstubs*) + . = ALIGN(32); + _end_sg = .; + } > FLASH + + __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768); + FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); + + /* QSPI_FLASH section to be downloaded via debugger */ + .qspi_flash : + { + __qspi_flash_start__ = .; + KEEP(*(.qspi_flash*)) + KEEP(*(.code_in_qspi*)) + __qspi_flash_end__ = .; + } > QSPI_FLASH + __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; + + /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ + __qspi_flash_code_addr__ = sgstubs_pre_location; + .qspi_non_retentive : AT(__qspi_flash_code_addr__) + { + __qspi_non_retentive_start__ = .; + KEEP(*(.qspi_non_retentive*)) + __qspi_non_retentive_end__ = .; + } > QSPI_FLASH + __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; + + __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ + __qspi_region_start_address__ = __qspi_flash_start__; + __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; + + /* Support for OctaRAM */ + .OSPI_DEVICE_0_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_0_start__ = .; + *(.ospi_device_0_no_load*) + . = ALIGN(4); + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0_RAM + + .OSPI_DEVICE_1_NO_LOAD (NOLOAD): + { + . = ALIGN(4); + __ospi_device_1_start__ = .; + *(.ospi_device_1_no_load*) + . = ALIGN(4); + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1_RAM + + /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); + + /* OSPI_DEVICE_0 section to be downloaded via debugger */ + .OSPI_DEVICE_0 : + { + __ospi_device_0_start__ = .; + KEEP(*(.ospi_device_0*)) + KEEP(*(.code_in_ospi_device_0*)) + __ospi_device_0_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; + + /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_0_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive)); + .ospi_device_0_non_retentive : AT(__ospi_device_0_code_addr__) + { + __ospi_device_0_non_retentive_start__ = .; + KEEP(*(.ospi_device_0_non_retentive*)) + __ospi_device_0_non_retentive_end__ = .; + } > OSPI_DEVICE_0 + __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; + + __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_0_region_start_address__ = __ospi_device_0_start__; + __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); + + /* OSPI_DEVICE_1 section to be downloaded via debugger */ + .OSPI_DEVICE_1 : + { + __ospi_device_1_start__ = .; + KEEP(*(.ospi_device_1*)) + KEEP(*(.code_in_ospi_device_1*)) + __ospi_device_1_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; + + /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ + __ospi_device_1_code_addr__ = sgstubs_pre_location + (SIZEOF(.qspi_non_retentive) + SIZEOF(.ospi_device_0_non_retentive)); + .ospi_device_1_non_retentive : AT(__ospi_device_1_code_addr__) + { + __ospi_device_1_non_retentive_start__ = .; + KEEP(*(.ospi_device_1_non_retentive*)) + __ospi_device_1_non_retentive_end__ = .; + } > OSPI_DEVICE_1 + __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; + + __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ + __ospi_device_1_region_start_address__ = __ospi_device_1_start__; + __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; + + /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ + __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; + + .noinit (NOLOAD): + { + . = ALIGN(4); + __noinit_start = .; + KEEP(*(.noinit*)) + . = ALIGN(8); + /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ + KEEP(*(.heap.*)) + __noinit_end = .; + } > RAM + + . = .; + __nocache_pre_location = .; + .nocache ALIGN(32) (NOLOAD): + { + __nocache_start = .; + + KEEP(*(.nocache)) + + . = ALIGN(32); + __nocache_end = .; + } > RAM + . = (SIZEOF(.nocache) > 0) ? __nocache_end : __nocache_pre_location; + + .bss : + { + . = ALIGN(4); + __bss_start__ = .; + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + } > RAM + + .heap (NOLOAD): + { + . = ALIGN(8); + __HeapBase = .; + /* Place the STD heap here. */ + KEEP(*(.heap)) + __HeapLimit = .; + } > RAM + + /* Stacks are stored in this section. */ + .stack_dummy (NOLOAD): + { + . = ALIGN(8); + __StackLimit = .; + /* Main stack */ + KEEP(*(.stack)) + __StackTop = .; + /* Thread stacks */ + KEEP(*(.stack*)) + __StackTopAll = .; + } > RAM + + PROVIDE(__stack = __StackTopAll); + + /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used + at run time for things such as ThreadX memory pool allocations. */ + __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); + + /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. + * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __RAM_NSC_START = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); + + /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. + * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not + * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. + * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ + __tz_RAM_N = DEFINED(FLASH_BOOTLOADER_LENGTH) ? (RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH) : DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_NSC_START, 8192); + + /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. + * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ + .ns_buffer (NOLOAD): + { + /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ + . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; + + KEEP(*(.ns_buffer*)) + } > RAM + + /* Data flash. */ + .data_flash : + { + . = ORIGIN(DATA_FLASH); + __tz_DATA_FLASH_S = .; + __Data_Flash_Start = .; + KEEP(*(.data_flash*)) + __Data_Flash_End = .; + + __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); + } > DATA_FLASH + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_S = ORIGIN(SDRAM); + + /* SDRAM */ + .sdram (NOLOAD): + { + __SDRAM_Start = .; + KEEP(*(.sdram*)) + KEEP(*(.frame*)) + __SDRAM_End = .; + } > SDRAM + + . = .; + __nocache_sdram_pre_location = .; + .nocache_sdram ALIGN(32) (NOLOAD): + { + __nocache_sdram_start = .; + + KEEP(*(.nocache_sdram)) + + . = ALIGN(32); + __nocache_sdram_end = .; + } > SDRAM + . = (SIZEOF(.nocache_sdram) > 0) ? __nocache_sdram_end : __nocache_sdram_pre_location; + + /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ + __tz_SDRAM_N = __SDRAM_End; + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ + __tz_ID_CODE_S = ORIGIN(ID_CODE); + + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + + .id_code : + { + __ID_Code_Start = .; + KEEP(*(.id_code*)) + __ID_Code_End = .; + } > ID_CODE + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); + + .option_setting_ofs : + { + __OPTION_SETTING_OFS_Start = .; + KEEP(*(.option_setting_ofs0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_ofs2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start; + KEEP(*(.option_setting_dualsel)) + __OPTION_SETTING_OFS_End = .; + } > OPTION_SETTING_OFS = 0xFF + + .option_setting_sas : + { + __OPTION_SETTING_SAS_Start = .; + KEEP(*(.option_setting_sas)) + __OPTION_SETTING_SAS_End = .; + } > OPTION_SETTING_SAS = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS); + + .option_setting_ns : + { + __OPTION_SETTING_NS_Start = .; + KEEP(*(.option_setting_ofs1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_ofs3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_banksel)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_bps3)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps0)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps1)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps2)) + . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start; + KEEP(*(.option_setting_pbps3)) + __OPTION_SETTING_NS_End = .; + } > OPTION_SETTING = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); + + .option_setting_s : + { + __OPTION_SETTING_S_Start = .; + KEEP(*(.option_setting_ofs1_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sec)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_pbps_sec3)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs1_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_ofs3_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_banksel_sel)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel0)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel1)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel2)) + . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start; + KEEP(*(.option_setting_bps_sel3)) + __OPTION_SETTING_S_End = .; + } > OPTION_SETTING_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_DATA_FLASH_S_S = ORIGIN(OPTION_SETTING_DATA_FLASH_S); + + .option_setting_data_flash_s : + { + __OPTION_SETTING_DATA_FLASH_S_Start = .; + KEEP(*(.option_setting_data_flash_fsblctrl0)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x04 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_fsblctrl1)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x08 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_fsblctrl2)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x0C : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_sacc0)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x10 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_sacc1)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x14 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_samr)) + . = USE_OPTION_SETTING_DATA_FLASH ? __OPTION_SETTING_DATA_FLASH_S_Start + 0x2E0 : __OPTION_SETTING_DATA_FLASH_S_Start; + KEEP(*(.option_setting_data_flash_hoemrtpk)) + __OPTION_SETTING_DATA_FLASH_S_End = .; + } > OPTION_SETTING_DATA_FLASH_S = 0xFF + + /* Symbol required for RA Configuration tool. */ + __tz_OPTION_SETTING_DATA_FLASH_S_N = __OPTION_SETTING_DATA_FLASH_S_End; +} diff --git a/hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld b/hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld new file mode 100644 index 000000000..2bc162511 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/script/memory_regions.ld @@ -0,0 +1,30 @@ + + /* generated memory regions file - do not edit */ + RAM_START = 0x22000000; + RAM_LENGTH = 0xE0000; + FLASH_START = 0x02000000; + FLASH_LENGTH = 0x1F8000; + DATA_FLASH_START = 0x27000000; + DATA_FLASH_LENGTH = 0x3000; + OPTION_SETTING_START = 0x0300A100; + OPTION_SETTING_LENGTH = 0x100; + OPTION_SETTING_S_START = 0x0300A200; + OPTION_SETTING_S_LENGTH = 0x100; + OPTION_SETTING_DATA_FLASH_S_START = 0x27030080; + OPTION_SETTING_DATA_FLASH_S_LENGTH = 0x800; + ID_CODE_START = 0x00000000; + ID_CODE_LENGTH = 0x0; + SDRAM_START = 0x68000000; + SDRAM_LENGTH = 0x8000000; + QSPI_FLASH_START = 0x60000000; + QSPI_FLASH_LENGTH = 0x0; + OSPI_DEVICE_0_START = 0x80000000; + OSPI_DEVICE_0_LENGTH = 0x10000000; + OSPI_DEVICE_1_START = 0x90000000; + OSPI_DEVICE_1_LENGTH = 0x10000000; + ITCM_START = 0x00000000; + ITCM_LENGTH = 0x10000; + DTCM_START = 0x20000000; + DTCM_LENGTH = 0x10000; + NS_OFFSET_START = 0x10000000; + NS_OFFSET_LENGTH = 0x0; diff --git a/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml index 0a9393769..cd2ffd8e1 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml +++ b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml @@ -133,8 +133,8 @@ - - + + @@ -290,7 +290,7 @@ - + -- cgit v1.3.1 From 0785daecc1a3a11d5bacbd7c4cd7dc4a48b11b49 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Dec 2024 17:24:57 +0700 Subject: update build for ra8m1: usbfs work, but usbhs not working just yet. Probably missing configuration or clock setup --- hw/bsp/ra/boards/ra6m5_ek/board.cmake | 21 +- hw/bsp/ra/boards/ra6m5_ek/board.mk | 3 +- hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug | 4 +- hw/bsp/ra/boards/ra8m1_ek/board.cmake | 8 + hw/bsp/ra/boards/ra8m1_ek/board.mk | 11 + .../ra8m1_ek/ozone/Renesas_RA8_TracePins.pex | Bin 0 -> 588 bytes hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug | 231 +++++++++++++++++++++ hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h | 10 +- .../ra8m1_ek/smart_configurator/configuration.xml | 64 +++++- hw/bsp/ra/family.c | 6 - hw/bsp/ra/family.cmake | 28 +++ hw/bsp/ra/family.mk | 55 +++-- 12 files changed, 393 insertions(+), 48 deletions(-) create mode 100644 hw/bsp/ra/boards/ra8m1_ek/board.mk create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ozone/Renesas_RA8_TracePins.pex create mode 100644 hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index a8220c9c7..568d5d78f 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -2,22 +2,15 @@ set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) -#set(JLINK_OPTION "-USB 000831915224") +set(JLINK_OPTION "-USB 000831915224") -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) -set(PORT 1) +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) endif() - -# Host port will be the other port -set(HOST_PORT $) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - BOARD_TUD_RHPORT=${PORT} - BOARD_TUH_RHPORT=${HOST_PORT} - # port 0 is fullspeed, port 1 is highspeed - BOARD_TUD_MAX_SPEED=$ - BOARD_TUH_MAX_SPEED=$ - ) endfunction() diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.mk b/hw/bsp/ra/boards/ra6m5_ek/board.mk index a5c933764..5fcc1d0f1 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.mk +++ b/hw/bsp/ra/boards/ra6m5_ek/board.mk @@ -5,6 +5,7 @@ MCU_VARIANT = ra6m5 JLINK_DEVICE = R7FA6M5BH # Port 1 is highspeed -PORT ?= 1 +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug index 7b8ee9c95..ca18fed7c 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug +++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug @@ -20,9 +20,7 @@ void OnProjectLoad (void) { Project.SetTraceSource ("Trace Pins"); Project.SetTracePortWidth (4); - //File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf"); - //File.Open ("../../../../../../examples/dual/cmake-build-ra6m5/host_hid_to_device_cdc/host_hid_to_device_cdc.elf"); - File.Open ("../../../../../../examples/cmake-build-ra6m5/host/cdc_msc_hid/cdc_msc_hid.elf"); + File.Open ("../../../../../../examples/cmake-build-ra6m5_ek/device/cdc_msc/cdc_msc.elf"); } /********************************************************************* * diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.cmake b/hw/bsp/ra/boards/ra8m1_ek/board.cmake index ae5d1d5bb..9c797c3b7 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/board.cmake +++ b/hw/bsp/ra/boards/ra8m1_ek/board.cmake @@ -4,5 +4,13 @@ set(MCU_VARIANT ra8m1) set(JLINK_DEVICE R7FA8M1AH) #set(JLINK_OPTION "-USB 001083115236") +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif() + function(update_board TARGET) endfunction() diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.mk b/hw/bsp/ra/boards/ra8m1_ek/board.mk new file mode 100644 index 000000000..2e56b3781 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/board.mk @@ -0,0 +1,11 @@ +CPU_CORE = cortex-m85 +MCU_VARIANT = ra8m1 + +# For flash-jlink target +JLINK_DEVICE = R7FA8M1AH + +# Port 1 is highspeed +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra8m1_ek/ozone/Renesas_RA8_TracePins.pex b/hw/bsp/ra/boards/ra8m1_ek/ozone/Renesas_RA8_TracePins.pex new file mode 100644 index 000000000..70dd323ec Binary files /dev/null and b/hw/bsp/ra/boards/ra8m1_ek/ozone/Renesas_RA8_TracePins.pex differ diff --git a/hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug b/hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug new file mode 100644 index 000000000..242a15db9 --- /dev/null +++ b/hw/bsp/ra/boards/ra8m1_ek/ozone/ra8m1.jdebug @@ -0,0 +1,231 @@ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + Project.SetTraceSource ("Trace Pins"); + Project.SetDevice ("R7FA8M1AH"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("50 MHz"); + + Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M85F.svd"); + Project.AddSvdFile ("../../../../../../../cmsis-svd-data/data/Renesas/R7FA6M5BH.svd"); + + File.Open ("../../../../../../examples/cmake-build-ra8m1_ek/device/cdc_msc/cdc_msc.elf"); +} +/********************************************************************* +* +* BeforeTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +void BeforeTargetConnect (void) { + // Trace pin init is done by J-Link script file as J-Link script files are IDE independent + //Project.SetJLinkScript("../../../debug.jlinkscript"); + Project.SetJLinkScript ("$(ProjectDir)/Renesas_RA8_TracePins.pex"); +} + +/********************************************************************* +* +* AfterTargetConnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetConnect (void) { +//} + +/********************************************************************* +* +* TargetDownload +* +* Function description +* Replaces the default program download routine. Optional. +* +********************************************************************** +*/ +//void TargetDownload (void) { +//} + +/********************************************************************* +* +* BeforeTargetDownload +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDownload (void) { +//} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. Optional. +* The default implementation initializes SP and PC to reset values. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + _SetupTarget(); +} + +/********************************************************************* +* +* BeforeTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetDisconnect +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetDisconnect (void) { +//} + +/********************************************************************* +* +* AfterTargetHalt +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void AfterTargetHalt (void) { +//} + +/********************************************************************* +* +* BeforeTargetResume +* +* Function description +* Event handler routine. Optional. +* +********************************************************************** +*/ +//void BeforeTargetResume (void) { +//} + +/********************************************************************* +* +* OnSnapshotLoad +* +* Function description +* Called upon loading a snapshot. Optional. +* +* Additional information +* This function is used to restore the target state in cases +* where values cannot simply be written to the target. +* Typical use: GPIO clock needs to be enabled, before +* GPIO is configured. +* +********************************************************************** +*/ +//void OnSnapshotLoad (void) { +//} + +/********************************************************************* +* +* OnSnapshotSave +* +* Function description +* Called upon saving a snapshot. Optional. +* +* Additional information +* This function is usually used to save values of the target +* state which can either not be trivially read, +* or need to be restored in a specific way or order. +* Typically use: Memory Mapped Registers, +* such as PLL and GPIO configuration. +* +********************************************************************** +*/ +//void OnSnapshotSave (void) { +//} + +/********************************************************************* +* +* OnError +* +* Function description +* Called when an error occurred. Optional. +* +********************************************************************** +*/ +//void OnError (void) { +//} + +/********************************************************************* +* +* AfterProjectLoad +* +* Function description +* After Project load routine. Optional. +* +********************************************************************** +*/ +//void AfterProjectLoad (void) { +//} + +/********************************************************************* +* +* _SetupTarget +* +* Function description +* Setup the target. +* Called by AfterTargetReset() and AfterTargetDownload(). +* +* Auto-generated function. May be overridden by Ozone. +* +********************************************************************** +*/ +void _SetupTarget(void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + // + // Set up initial stack pointer + // + SP = Target.ReadU32(VectorTableAddr); + if (SP != 0xFFFFFFFF) { + Target.SetReg("SP", SP); + } + // + // Set up entry point PC + // + PC = Elf.GetEntryPointPC(); + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else { + Util.Error("Project script error: failed to set up entry point PC", 1); + } +} diff --git a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h index 9f8c76144..f2f1ae0c9 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra8m1_ek/ra_gen/bsp_clock_cfg.h @@ -11,8 +11,8 @@ #define BSP_CFG_PLL_FREQUENCY_HZ (960000000) /* PLL 960000000Hz */ #define BSP_CFG_PLODIVP (BSP_CLOCKS_PLL_DIV_2) /* PLL1P Div /2 */ #define BSP_CFG_PLL1P_FREQUENCY_HZ (480000000) /* PLL1P 480000000Hz */ -#define BSP_CFG_PLODIVQ (BSP_CLOCKS_PLL_DIV_2) /* PLL1Q Div /2 */ -#define BSP_CFG_PLL1Q_FREQUENCY_HZ (480000000) /* PLL1Q 480000000Hz */ +#define BSP_CFG_PLODIVQ (BSP_CLOCKS_PLL_DIV_4) /* PLL1Q Div /4 */ +#define BSP_CFG_PLL1Q_FREQUENCY_HZ (240000000) /* PLL1Q 240000000Hz */ #define BSP_CFG_PLODIVR (BSP_CLOCKS_PLL_DIV_2) /* PLL1R Div /2 */ #define BSP_CFG_PLL1R_FREQUENCY_HZ (480000000) /* PLL1R 480000000Hz */ #define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL2 Disabled */ @@ -31,8 +31,8 @@ #define BSP_CFG_SPICLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* SPICLK Disabled */ #define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ #define BSP_CFG_I3CCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* I3CCLK Disabled */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* UCK Disabled */ -#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* U60CK Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL1Q) /* UCK Src: PLL1Q */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL1P) /* U60CK Src: PLL1P */ #define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ #define BSP_CFG_CPUCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CPUCLK Div /1 */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ @@ -51,6 +51,6 @@ #define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_8) /* CANFDCLK Div /8 */ #define BSP_CFG_I3CCLK_DIV (BSP_CLOCKS_I3C_CLOCK_DIV_3) /* I3CCLK Div /3 */ #define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCK Div /5 */ -#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* U60CK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_8) /* U60CK Div /8 */ #define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_4) /* OCTASPICLK Div /4 */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml index cd2ffd8e1..0f83b4a11 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml +++ b/hw/bsp/ra/boards/ra8m1_ek/smart_configurator/configuration.xml @@ -162,7 +162,7 @@ - + @@ -182,8 +182,8 @@ - - + + @@ -202,7 +202,7 @@ - + @@ -261,6 +261,14 @@ Board support package for RA8M1 - Events Renesas.RA_mcu_ra8m1.5.6.0.pack + + USB Basic + Renesas.RA.5.6.0.pack + + + USB Peripheral Communications Device Class + Renesas.RA.5.6.0.pack + @@ -273,9 +281,57 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 29dcb912c..523b6ff55 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -32,11 +32,7 @@ #pragma GCC diagnostic ignored "-Wundef" #endif -//#include "bsp_api.h" -//#include "r_ioport.h" #include "common_data.h" - -#include "r_ioport_api.h" #include "renesas.h" #ifdef __GNUC__ @@ -204,7 +200,6 @@ void usbfs_d1fifo_handler(void) { //------------- USB1 HighSpeed -------------// #ifdef BOARD_HAS_USB_HIGHSPEED - void usbhs_interrupt_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); @@ -223,7 +218,6 @@ void usbhs_d1fifo_handler(void) { R_BSP_IrqStatusClear(irq); // TODO not used yet } - #endif //--------------------------------------------------------------------+ diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index e234c7b16..9eca93b4d 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -15,6 +15,28 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "") +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 0) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) +endif () + +if (NOT DEFINED RHPORT_SPEED) + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) + #------------------------------------ # BOARD_TARGET #------------------------------------ @@ -57,6 +79,12 @@ function(add_board_target BOARD_TARGET) ${FSP_RA}/src/bsp/mcu/all ${FSP_RA}/src/bsp/mcu/${MCU_VARIANT} ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) update_board(${BOARD_TARGET}) diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 5c7305912..6ac7c262f 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -4,33 +4,58 @@ include $(TOP)/$(BOARD_PATH)/board.mk # Don't include options setting in .bin file since it create unnecessary large file due to padding OBJCOPY_BIN_OPTION = --only-section .text --only-section .data --only-section .rodata --only-section .bss -# Default to port 0 fullspeed, board with port 1 highspeed should override this in board.mk -PORT ?= 0 +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 0 +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# -------------- +# Compiler Flags +# -------------- CFLAGS += \ - -flto \ -DCFG_TUSB_MCU=OPT_MCU_RAXXX \ - -DBOARD_TUD_RHPORT=$(PORT) \ + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + +CFLAGS_GCC += \ + -flto \ -Wno-error=undef \ -Wno-error=strict-prototypes \ -Wno-error=cast-align \ -Wno-error=cast-qual \ -Wno-error=unused-but-set-variable \ -Wno-error=unused-variable \ - -nostdlib \ - -nostartfiles \ -ffreestanding -ifeq ($(PORT), 1) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - $(info "Using PORT 1 HighSpeed") -else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - $(info "Using PORT 0 FullSpeed") -endif - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostartfiles -nostdlib \ + -specs=nosys.specs -specs=nano.specs +# ----------------- +# Sources & Include +# ----------------- SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ -- cgit v1.3.1 From 380bfc0a6345f7295e2a5ff60c9712255f04a2dc Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 13 Dec 2024 17:50:00 +0700 Subject: fix portenta build, added core-m85.cmake/mk --- examples/build_system/cmake/cpu/cortex-m85.cmake | 25 ++++++++ examples/build_system/make/cpu/cortex-m85.mk | 27 ++++++++ hw/bsp/ra/boards/portenta_c33/board.cmake | 21 ++----- hw/bsp/ra/boards/portenta_c33/board.mk | 3 +- .../portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h | 17 ++++++ hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c | 11 ++++ hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h | 20 ++++++ hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c | 71 ++++++++++++++++++++++ 8 files changed, 179 insertions(+), 16 deletions(-) create mode 100644 examples/build_system/cmake/cpu/cortex-m85.cmake create mode 100644 examples/build_system/make/cpu/cortex-m85.mk create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h create mode 100644 hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c (limited to 'hw/bsp/ra') diff --git a/examples/build_system/cmake/cpu/cortex-m85.cmake b/examples/build_system/cmake/cpu/cortex-m85.cmake new file mode 100644 index 000000000..30314acbc --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m85.cmake @@ -0,0 +1,25 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m85 + -mfloat-abi=hard + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-m85 + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m85 + --fpu VFPv5_D16 + ) + set(FREERTOS_PORT IAR_ARM_CM85_NTZ_NONSECURE CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/make/cpu/cortex-m85.mk b/examples/build_system/make/cpu/cortex-m85.mk new file mode 100644 index 000000000..75e8f3aaf --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m85.mk @@ -0,0 +1,27 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m85 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + --target=arm-none-eabi \ + -mcpu=cortex-m85 \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),iar) + CFLAGS += \ + --cpu cortex-m85 \ + --fpu VFPv5_D16 \ + + ASFLAGS += \ + --cpu cortex-m85 \ + --fpu VFPv5_D16 \ + +else + $(error "TOOLCHAIN is not supported") +endif + +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM85_NTZ/non_secure diff --git a/hw/bsp/ra/boards/portenta_c33/board.cmake b/hw/bsp/ra/boards/portenta_c33/board.cmake index 1837d8450..520686daa 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.cmake +++ b/hw/bsp/ra/boards/portenta_c33/board.cmake @@ -4,22 +4,13 @@ set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) set(DFU_UTIL_VID_PID 2341:0368) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) - -# Device port default to PORT1 Highspeed -if (NOT DEFINED PORT) -set(PORT 1) +# device default to PORT 1 High Speed +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif() +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 0) endif() - -# Host port will be the other port -set(HOST_PORT $) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - BOARD_TUD_RHPORT=${PORT} - BOARD_TUH_RHPORT=${HOST_PORT} - # port 0 is fullspeed, port 1 is highspeed - BOARD_TUD_MAX_SPEED=$ - BOARD_TUH_MAX_SPEED=$ - ) endfunction() diff --git a/hw/bsp/ra/boards/portenta_c33/board.mk b/hw/bsp/ra/boards/portenta_c33/board.mk index 4da34306e..ab814cda6 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.mk +++ b/hw/bsp/ra/boards/portenta_c33/board.mk @@ -2,7 +2,8 @@ CPU_CORE = cortex-m33 MCU_VARIANT = ra6m5 # Port 1 is highspeed -PORT ?= 1 +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 0 JLINK_DEVICE = R7FA6M5BH DFU_UTIL_OPTION = -d 2341:0368 -a 0 diff --git a/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h new file mode 100644 index 000000000..c411386c1 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_cfg/fsp_cfg/bsp/bsp_pin_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_PIN_CFG_H_ +#define BSP_PIN_CFG_H_ +#include "r_ioport.h" + +/* Common macro for FSP header files. There is also a corresponding FSP_FOOTER macro at the end of this file. */ +FSP_HEADER + +#define LED1 (BSP_IO_PORT_01_PIN_07) +#define SW1 (BSP_IO_PORT_04_PIN_08) +extern const ioport_cfg_t g_bsp_pin_cfg; /* R7FA6M5BH3CFC.pincfg */ + +void BSP_PinConfigSecurityInit(); + +/* Common macro for FSP header files. There is also a corresponding FSP_HEADER macro at the top of this file. */ +FSP_FOOTER +#endif /* BSP_PIN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c new file mode 100644 index 000000000..50036c0ad --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.c @@ -0,0 +1,11 @@ +/* generated common source file - do not edit */ +#include "common_data.h" +ioport_instance_ctrl_t g_ioport_ctrl; +const ioport_instance_t g_ioport = + { + .p_api = &g_ioport_on_ioport, + .p_ctrl = &g_ioport_ctrl, + .p_cfg = &g_bsp_pin_cfg, + }; +void g_common_init(void) { +} diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h new file mode 100644 index 000000000..6a08cbee0 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/common_data.h @@ -0,0 +1,20 @@ +/* generated common header file - do not edit */ +#ifndef COMMON_DATA_H_ +#define COMMON_DATA_H_ +#include +#include "bsp_api.h" +#include "r_ioport.h" +#include "bsp_pin_cfg.h" +FSP_HEADER +#define IOPORT_CFG_NAME g_bsp_pin_cfg +#define IOPORT_CFG_OPEN R_IOPORT_Open +#define IOPORT_CFG_CTRL g_ioport_ctrl + +/* IOPORT Instance */ +extern const ioport_instance_t g_ioport; + +/* IOPORT control structure. */ +extern ioport_instance_ctrl_t g_ioport_ctrl; +void g_common_init(void); +FSP_FOOTER +#endif /* COMMON_DATA_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c b/hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c new file mode 100644 index 000000000..fad79741a --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/ra_gen/pin_data.c @@ -0,0 +1,71 @@ +/* generated pin source file - do not edit */ +#include "bsp_api.h" +#include "r_ioport.h" + + +const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { + { + .pin = BSP_IO_PORT_01_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) + }, + { + .pin = BSP_IO_PORT_01_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_03_PIN_00, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_DEBUG) + }, + { + .pin = BSP_IO_PORT_04_PIN_07, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) + }, + { + .pin = BSP_IO_PORT_04_PIN_08, + .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT | (uint32_t) IOPORT_CFG_PULLUP_ENABLE) + }, + { + .pin = BSP_IO_PORT_11_PIN_01, + .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_HS) + }, +}; + +const ioport_cfg_t g_bsp_pin_cfg = { + .number_of_pins = sizeof(g_bsp_pin_cfg_data)/sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], +}; + +#if BSP_TZ_SECURE_BUILD + +void R_BSP_PinCfgSecurityInit(void); + +/* Initialize SAR registers for secure pins. */ +void R_BSP_PinCfgSecurityInit(void) +{ + #if (2U == BSP_FEATURE_IOPORT_VERSION) + uint32_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #else + uint16_t pmsar[BSP_FEATURE_BSP_NUM_PMSAR]; + #endif + memset(pmsar, 0xFF, BSP_FEATURE_BSP_NUM_PMSAR * sizeof(R_PMISC->PMSAR[0])); + + + for(uint32_t i = 0; i < g_bsp_pin_cfg.number_of_pins; i++) + { + uint32_t port_pin = g_bsp_pin_cfg.p_pin_cfg_data[i].pin; + uint32_t port = port_pin >> 8U; + uint32_t pin = port_pin & 0xFFU; + pmsar[port] &= (uint16_t) ~(1U << pin); + } + + for(uint32_t i = 0; i < BSP_FEATURE_BSP_NUM_PMSAR; i++) + { + #if (2U == BSP_FEATURE_IOPORT_VERSION) + R_PMISC->PMSAR[i].PMSAR = (uint16_t) pmsar[i]; + #else + R_PMISC->PMSAR[i].PMSAR = pmsar[i]; + #endif + } + +} +#endif -- cgit v1.3.1 From 656772fc9defc73c32443259f866daadc657f23d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 16 Dec 2024 22:03:06 +0700 Subject: make sure g_bsp_rom_registers is not dropped by linker in cmake build. always reserve 0x100 for option setting in linker to prevent possible bricked mcu --- hw/bsp/ra/boards/portenta_c33/script/fsp.ld | 3 +++ hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld | 3 +++ hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld | 3 +++ hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld | 3 +++ hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld | 3 +++ hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld | 3 +++ hw/bsp/ra/boards/uno_r4/script/fsp.ld | 3 +++ hw/bsp/ra/family.cmake | 6 +++++- 8 files changed, 26 insertions(+), 1 deletion(-) (limited to 'hw/bsp/ra') diff --git a/hw/bsp/ra/boards/portenta_c33/script/fsp.ld b/hw/bsp/ra/boards/portenta_c33/script/fsp.ld index 627ffe4d9..605eef7d2 100644 --- a/hw/bsp/ra/boards/portenta_c33/script/fsp.ld +++ b/hw/bsp/ra/boards/portenta_c33/script/fsp.ld @@ -173,6 +173,9 @@ SECTIONS . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld index 627ffe4d9..605eef7d2 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld +++ b/hw/bsp/ra/boards/ra4m1_ek/script/fsp.ld @@ -173,6 +173,9 @@ SECTIONS . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld b/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld index 627ffe4d9..605eef7d2 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld +++ b/hw/bsp/ra/boards/ra4m3_ek/script/fsp.ld @@ -173,6 +173,9 @@ SECTIONS . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld index 627ffe4d9..605eef7d2 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld +++ b/hw/bsp/ra/boards/ra6m1_ek/script/fsp.ld @@ -173,6 +173,9 @@ SECTIONS . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld index 627ffe4d9..605eef7d2 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld +++ b/hw/bsp/ra/boards/ra6m5_ek/script/fsp.ld @@ -173,6 +173,9 @@ SECTIONS . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ diff --git a/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld b/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld index 32cbf0b22..d7f78a915 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld +++ b/hw/bsp/ra/boards/ra8m1_ek/script/fsp.ld @@ -177,6 +177,9 @@ SECTIONS . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ diff --git a/hw/bsp/ra/boards/uno_r4/script/fsp.ld b/hw/bsp/ra/boards/uno_r4/script/fsp.ld index 627ffe4d9..605eef7d2 100644 --- a/hw/bsp/ra/boards/uno_r4/script/fsp.ld +++ b/hw/bsp/ra/boards/uno_r4/script/fsp.ld @@ -173,6 +173,9 @@ SECTIONS . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400; KEEP(*(.rom_registers*)) + /* Reserving 0x100 bytes of space for ROM registers. */ + . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500; + /* Allocate flash write-boundary-aligned * space for sce9 wrapped public keys for mcuboot if the module is used. */ diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 9eca93b4d..d4d795ae5 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -54,7 +54,6 @@ function(add_board_target BOARD_TARGET) ${FSP_RA}/src/bsp/mcu/all/bsp_io.c ${FSP_RA}/src/bsp/mcu/all/bsp_irq.c ${FSP_RA}/src/bsp/mcu/all/bsp_register_protection.c - ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c ${FSP_RA}/src/bsp/mcu/all/bsp_security.c ${FSP_RA}/src/r_ioport/r_ioport.c @@ -125,12 +124,17 @@ function(family_configure_example TARGET RTOS) # BSP ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + # Explicitly added bsp_rom_registers here, otherwise MCU can be bricked if g_bsp_rom_registers is dropped by linker + ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c ) target_include_directories(${TARGET} PUBLIC # family, hw, board ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ) + target_compile_options(${TARGET} PUBLIC + -Wno-error=undef + ) # # RA has custom freertos port # if (NOT TARGET freertos_kernel_port) -- cgit v1.3.1 From 7e207e4f4a098fddb13efc329e57e6095aa13873 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 16 Dec 2024 23:48:44 +0700 Subject: fix warning due to bsp_rom_registers.c --- .github/workflows/pre-commit.yml | 1 + hw/bsp/ra/family.cmake | 1 + 2 files changed, 2 insertions(+) (limited to 'hw/bsp/ra') diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 530484079..f751dc44d 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -33,6 +33,7 @@ jobs: - name: Build Fuzzer run: | + clang --version export CC=clang export CXX=clang++ fuzz_harness=$(ls -d test/fuzz/device/*/) diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index d4d795ae5..ceb1e48bd 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -134,6 +134,7 @@ function(family_configure_example TARGET RTOS) ) target_compile_options(${TARGET} PUBLIC -Wno-error=undef + -Wno-error=strict-prototypes ) # # RA has custom freertos port -- cgit v1.3.1 From 6a36c74b10b25f1455d83ba473fff52a9dbcc6d2 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 27 Dec 2024 09:11:09 +0700 Subject: embed metadata to family.c and board.h to generate supported boards doc --- docs/info/changelog.rst | 2 - docs/reference/boards.rst | 315 +++++++++++++++++++++ docs/reference/index.rst | 3 +- .../broadcom_32bit/boards/raspberrypi_zero/board.h | 5 + hw/bsp/broadcom_32bit/family.c | 4 + .../broadcom_64bit/boards/raspberrypi_cm4/board.h | 5 + .../boards/raspberrypi_zero2/board.h | 5 + hw/bsp/broadcom_64bit/family.c | 4 + hw/bsp/brtmm90x/boards/mm900evxb/board.h | 5 + hw/bsp/brtmm90x/family.c | 4 + hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h | 5 + hw/bsp/ch32f20x/family.c | 4 + hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h | 5 + hw/bsp/ch32v10x/family.c | 4 + hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h | 5 + hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h | 5 + hw/bsp/ch32v20x/boards/nanoch32v203/board.h | 5 + hw/bsp/ch32v20x/family.c | 4 + hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h | 5 + hw/bsp/ch32v307/family.c | 4 + hw/bsp/da1469x/boards/da14695_dk_usb/board.h | 5 + hw/bsp/da1469x/boards/da1469x_dk_pro/board.h | 5 + hw/bsp/da1469x/family.c | 4 + .../boards/adafruit_feather_esp32_v2/board.h | 5 + .../boards/adafruit_feather_esp32s2/board.h | 5 + .../boards/adafruit_feather_esp32s3/board.h | 5 + .../boards/adafruit_magtag_29gray/board.h | 5 + .../boards/adafruit_metro_esp32s2/board.h | 5 + hw/bsp/espressif/boards/espressif_addax_1/board.h | 5 + .../espressif/boards/espressif_c3_devkitc/board.h | 5 + .../espressif/boards/espressif_c6_devkitc/board.h | 5 + hw/bsp/espressif/boards/espressif_kaluga_1/board.h | 5 + .../boards/espressif_p4_function_ev/board.h | 5 + .../espressif/boards/espressif_s2_devkitc/board.h | 5 + .../espressif/boards/espressif_s3_devkitc/board.h | 5 + .../espressif/boards/espressif_s3_devkitm/board.h | 5 + hw/bsp/espressif/boards/espressif_saola_1/board.h | 5 + hw/bsp/espressif/boards/family.c | 4 + hw/bsp/f1c100s/boards/f1c100s/board.h | 5 + hw/bsp/f1c100s/family.c | 4 + hw/bsp/fomu/boards/fomu/board.h | 5 + hw/bsp/fomu/family.c | 4 + hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h | 5 + hw/bsp/gd32vf103/family.c | 4 + hw/bsp/imxrt/boards/metro_m7_1011/board.h | 5 + hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1010_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1015_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1020_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1024_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1060_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1064_evk/board.h | 5 + hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h | 5 + hw/bsp/imxrt/boards/teensy_40/board.h | 5 +- hw/bsp/imxrt/boards/teensy_41/board.h | 5 +- hw/bsp/imxrt/family.c | 4 + hw/bsp/kinetis_k/boards/frdm_k64f/board.h | 5 + hw/bsp/kinetis_k/boards/teensy_35/board.h | 5 + hw/bsp/kinetis_k/family.c | 4 + hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h | 4 + hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h | 4 + hw/bsp/kinetis_k32l2/boards/kuiic/board.h | 4 + hw/bsp/kinetis_k32l2/family.c | 4 + hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h | 5 + hw/bsp/kinetis_kl/family.c | 4 + hw/bsp/lpc11/boards/lpcxpresso11u37/board.h | 5 + hw/bsp/lpc11/boards/lpcxpresso11u68/board.h | 5 + hw/bsp/lpc11/family.c | 4 + hw/bsp/lpc13/boards/lpcxpresso1347/board.h | 5 + hw/bsp/lpc13/family.c | 4 + hw/bsp/lpc15/boards/lpcxpresso1549/board.h | 5 + hw/bsp/lpc15/family.c | 4 + hw/bsp/lpc17/boards/lpcxpresso1769/board.h | 5 + hw/bsp/lpc17/boards/mbed1768/board.h | 5 + hw/bsp/lpc17/family.c | 4 + hw/bsp/lpc18/boards/lpcxpresso18s37/board.h | 5 + hw/bsp/lpc18/boards/mcb1800/board.h | 5 + hw/bsp/lpc18/family.c | 4 + hw/bsp/lpc40/boards/ea4088_quickstart/board.h | 5 + hw/bsp/lpc40/family.c | 4 + hw/bsp/lpc43/boards/ea4357/board.h | 5 + hw/bsp/lpc43/boards/lpcxpresso43s67/board.h | 5 + hw/bsp/lpc43/family.c | 4 + hw/bsp/lpc51/boards/lpcxpresso51u68/board.h | 5 + hw/bsp/lpc51/family.c | 4 + hw/bsp/lpc54/boards/lpcxpresso54114/board.h | 5 + hw/bsp/lpc54/boards/lpcxpresso54608/board.h | 5 + hw/bsp/lpc54/boards/lpcxpresso54628/board.h | 5 + hw/bsp/lpc54/family.c | 4 + hw/bsp/lpc55/boards/double_m33_express/board.h | 5 + hw/bsp/lpc55/boards/lpcxpresso55s28/board.h | 5 + hw/bsp/lpc55/boards/lpcxpresso55s69/board.h | 5 + hw/bsp/lpc55/boards/mcu_link/board.h | 5 + hw/bsp/lpc55/family.c | 4 + hw/bsp/max32650/boards/max32650evkit/board.h | 5 + hw/bsp/max32650/boards/max32650fthr/board.h | 5 + hw/bsp/max32650/boards/max32651evkit/board.h | 5 + hw/bsp/max32650/family.c | 4 + hw/bsp/max32666/boards/max32666evkit/board.h | 5 + hw/bsp/max32666/boards/max32666fthr/board.h | 5 + hw/bsp/max32666/family.c | 4 + hw/bsp/max32690/boards/apard32690/board.h | 5 + hw/bsp/max32690/boards/max32690evkit/board.h | 5 + hw/bsp/max32690/family.c | 4 + hw/bsp/max78002/boards/max78002evkit/board.h | 5 + hw/bsp/max78002/family.c | 4 + hw/bsp/mcx/boards/frdm_mcxa153/board.h | 5 + hw/bsp/mcx/boards/frdm_mcxn947/board.h | 5 + hw/bsp/mcx/boards/mcxn947brk/board.h | 5 + hw/bsp/mcx/family.c | 4 + hw/bsp/mm32/boards/mm32f327x_mb39/board.h | 5 + hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h | 5 + hw/bsp/mm32/family.c | 4 + hw/bsp/msp430/boards/msp_exp430f5529lp/board.h | 5 + hw/bsp/msp430/family.c | 4 + hw/bsp/msp432e4/boards/msp_exp432e401y/board.h | 5 + hw/bsp/msp432e4/family.c | 4 + hw/bsp/nrf/boards/adafruit_clue/board.h | 5 + hw/bsp/nrf/boards/arduino_nano33_ble/board.h | 5 + .../nrf/boards/circuitplayground_bluefruit/board.h | 5 + hw/bsp/nrf/boards/feather_nrf52840_express/board.h | 5 + hw/bsp/nrf/boards/feather_nrf52840_sense/board.h | 5 + hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h | 5 + hw/bsp/nrf/boards/pca10056/board.h | 5 + hw/bsp/nrf/boards/pca10059/board.h | 5 + hw/bsp/nrf/boards/pca10095/board.h | 5 + hw/bsp/nrf/boards/pca10100/board.h | 5 + hw/bsp/nrf/family.c | 4 + hw/bsp/pic32mz/boards/olimex_emz64/board.h | 43 +++ hw/bsp/pic32mz/boards/olimex_hmz144/board.h | 43 +++ hw/bsp/pic32mz/family.c | 4 + hw/bsp/ra/boards/portenta_c33/board.h | 5 + hw/bsp/ra/boards/ra2a1_ek/board.h | 5 + hw/bsp/ra/boards/ra4m1_ek/board.h | 5 + hw/bsp/ra/boards/ra4m3_ek/board.h | 5 + hw/bsp/ra/boards/ra6m1_ek/board.h | 5 + hw/bsp/ra/boards/ra6m5_ek/board.h | 5 + hw/bsp/ra/boards/ra8m1_ek/board.h | 5 + hw/bsp/ra/boards/uno_r4/board.h | 5 + hw/bsp/ra/family.c | 4 + hw/bsp/rp2040/board.h | 5 + hw/bsp/rp2040/family.c | 4 + hw/bsp/rx/boards/gr_citrus/board.h | 43 +++ hw/bsp/rx/boards/rx65n_target/board.h | 43 +++ hw/bsp/samd11/boards/cynthion_d11/board.h | 5 + hw/bsp/samd11/boards/samd11_xplained/board.h | 5 + hw/bsp/samd11/family.c | 4 + hw/bsp/samd21/boards/atsamd21_xpro/board.h | 5 + .../boards/circuitplayground_express/board.h | 5 + hw/bsp/samd21/boards/curiosity_nano/board.h | 5 + hw/bsp/samd21/boards/cynthion_d21/board.h | 5 + hw/bsp/samd21/boards/feather_m0_express/board.h | 5 + hw/bsp/samd21/boards/itsybitsy_m0/board.h | 5 + hw/bsp/samd21/boards/metro_m0_express/board.h | 5 + hw/bsp/samd21/boards/qtpy/board.h | 5 + hw/bsp/samd21/boards/seeeduino_xiao/board.h | 5 + .../samd21/boards/sparkfun_samd21_mini_usb/board.h | 5 + hw/bsp/samd21/boards/trinket_m0/board.h | 5 + hw/bsp/samd21/family.c | 4 + hw/bsp/samd5x_e5x/boards/d5035_01/board.h | 5 + .../samd5x_e5x/boards/feather_m4_express/board.h | 5 + hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h | 5 + hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h | 5 + hw/bsp/samd5x_e5x/boards/pybadge/board.h | 5 + hw/bsp/samd5x_e5x/boards/pyportal/board.h | 5 + hw/bsp/samd5x_e5x/boards/same54_xplained/board.h | 5 + hw/bsp/samd5x_e5x/family.c | 4 + hw/bsp/samg/boards/samg55_xplained/board.h | 5 + hw/bsp/samg/family.c | 4 + hw/bsp/saml2x/boards/atsaml21_xpro/board.h | 5 + hw/bsp/saml2x/boards/saml22_feather/board.h | 5 + hw/bsp/saml2x/boards/sensorwatch_m0/board.h | 5 + hw/bsp/saml2x/family.c | 4 + hw/bsp/stm32c0/boards/stm32c071nucleo/board.h | 5 + hw/bsp/stm32c0/family.c | 4 + hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h | 5 + hw/bsp/stm32f0/boards/stm32f072disco/board.h | 5 + hw/bsp/stm32f0/boards/stm32f072eval/board.h | 5 + hw/bsp/stm32f0/family.c | 4 + hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h | 5 + hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h | 5 + hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h | 5 + hw/bsp/stm32f1/family.c | 4 + hw/bsp/stm32f2/boards/stm32f207nucleo/board.h | 6 + hw/bsp/stm32f2/family.c | 4 + hw/bsp/stm32f3/boards/stm32f303disco/board.h | 6 + hw/bsp/stm32f3/family.c | 4 + hw/bsp/stm32f4/boards/feather_stm32f405/board.h | 5 + hw/bsp/stm32f4/boards/pyboardv11/board.h | 5 + hw/bsp/stm32f4/boards/stm32f401blackpill/board.h | 5 + hw/bsp/stm32f4/boards/stm32f407blackvet/board.h | 5 + hw/bsp/stm32f4/boards/stm32f407disco/board.h | 5 + hw/bsp/stm32f4/boards/stm32f411blackpill/board.h | 5 + hw/bsp/stm32f4/boards/stm32f411disco/board.h | 5 + hw/bsp/stm32f4/boards/stm32f412disco/board.h | 5 + hw/bsp/stm32f4/boards/stm32f412nucleo/board.h | 5 + hw/bsp/stm32f4/boards/stm32f439nucleo/board.h | 5 + hw/bsp/stm32f4/family.c | 4 + hw/bsp/stm32f7/boards/stlinkv3mini/board.h | 5 + hw/bsp/stm32f7/boards/stm32f723disco/board.h | 5 + hw/bsp/stm32f7/boards/stm32f746disco/board.h | 5 + hw/bsp/stm32f7/boards/stm32f746nucleo/board.h | 5 + hw/bsp/stm32f7/boards/stm32f767nucleo/board.h | 5 + hw/bsp/stm32f7/boards/stm32f769disco/board.h | 5 + hw/bsp/stm32f7/family.c | 4 + hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h | 5 + hw/bsp/stm32g0/family.c | 4 + hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h | 5 + hw/bsp/stm32g4/boards/stm32g474nucleo/board.h | 5 + hw/bsp/stm32g4/boards/stm32g491nucleo/board.h | 5 + hw/bsp/stm32g4/family.c | 4 + hw/bsp/stm32h5/boards/stm32h503nucleo/board.h | 5 + hw/bsp/stm32h5/boards/stm32h563nucleo/board.h | 5 + hw/bsp/stm32h5/boards/stm32h573i_dk/board.h | 5 + hw/bsp/stm32h5/family.c | 3 + hw/bsp/stm32h7/boards/daisyseed/board.h | 5 + hw/bsp/stm32h7/boards/stm32h723nucleo/board.h | 5 + hw/bsp/stm32h7/boards/stm32h743eval/board.h | 6 +- hw/bsp/stm32h7/boards/stm32h743nucleo/board.h | 5 + hw/bsp/stm32h7/boards/stm32h745disco/board.h | 5 + hw/bsp/stm32h7/boards/stm32h750_weact/board.h | 5 + hw/bsp/stm32h7/boards/stm32h750bdk/board.h | 5 + hw/bsp/stm32h7/boards/waveshare_openh743i/board.h | 5 + hw/bsp/stm32h7/family.c | 4 + hw/bsp/stm32l0/boards/stm32l052dap52/board.h | 5 + hw/bsp/stm32l0/boards/stm32l0538disco/board.h | 5 + hw/bsp/stm32l0/family.c | 4 + hw/bsp/stm32l4/boards/stm32l412nucleo/board.h | 5 + hw/bsp/stm32l4/boards/stm32l476disco/board.h | 5 + hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h | 5 + hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h | 5 + hw/bsp/stm32l4/family.c | 4 + hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h | 5 + hw/bsp/stm32u5/boards/stm32u545nucleo/board.h | 5 + hw/bsp/stm32u5/boards/stm32u575eval/board.h | 5 + hw/bsp/stm32u5/boards/stm32u575nucleo/board.h | 5 + hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h | 5 + hw/bsp/stm32u5/family.c | 4 + hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h | 5 + hw/bsp/stm32wb/family.c | 4 + hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h | 5 + hw/bsp/tm4c/family.c | 4 + hw/bsp/xmc4000/boards/xmc4500_relax/board.h | 5 + hw/bsp/xmc4000/boards/xmc4700_relax/board.h | 5 + hw/bsp/xmc4000/family.c | 4 + tools/gen_doc.py | 78 ++++- 247 files changed, 1697 insertions(+), 7 deletions(-) create mode 100644 docs/reference/boards.rst create mode 100644 hw/bsp/pic32mz/boards/olimex_emz64/board.h create mode 100644 hw/bsp/pic32mz/boards/olimex_hmz144/board.h create mode 100644 hw/bsp/rx/boards/gr_citrus/board.h create mode 100644 hw/bsp/rx/boards/rx65n_target/board.h (limited to 'hw/bsp/ra') diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index a69705bde..0a34c0842 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -17,7 +17,6 @@ General - Build ARM IAR with CircleCI - Improve HIL with dual/host_info_to_device_cdc optional for pico/pico2, enable dwc2 dma test - API Changes ----------- @@ -31,7 +30,6 @@ API Changes - ``CFG_TUD/TUH_DWC2_SLAVE_ENABLE`` enable dwc2 slave mode - ``CFG_TUD/TUH_DWC2_DMA_ENABLE`` enable dwc2 dma mode - Controller Driver (DCD & HCD) ----------------------------- diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst new file mode 100644 index 000000000..424336dad --- /dev/null +++ b/docs/reference/boards.rst @@ -0,0 +1,315 @@ +**************** +Supported Boards +**************** + +Following boards are supported and can be used to run stock examples + + + +Analog Devices +============== + +============= ================ ======== =========================================================================================================================== ====== +Board Name Family URL Note +============= ================ ======== =========================================================================================================================== ====== +max32650evkit MAX32650 EVKIT max32650 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview +max32650fthr MAX32650 Feather max32650 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html +max32651evkit MAX32651 EVKIT max32650 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html +max32666evkit MAX32666 EVKIT max32666 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html +max32666fthr MAX32666 Feather max32666 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html +apard32690 APARD32690-SL max32690 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html +max32690evkit MAX32690 EVKIT max32690 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html +max78002evkit MAX78002 EVKIT max78002 https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html +============= ================ ======== =========================================================================================================================== ====== + +Bridgetek +========= + +========= ========= ======== ===================================== ====== +Board Name Family URL Note +========= ========= ======== ===================================== ====== +mm900evxb MM900EVxB brtmm90x https://brtchip.com/product/mm900ev1b +========= ========= ======== ===================================== ====== + +Espressif +========= + +========================= ============================== ========= ======================================================================================================== ====== +Board Name Family URL Note +========================= ============================== ========= ======================================================================================================== ====== +adafruit_feather_esp32_v2 Adafruit Feather ESP32 v2 espressif https://www.adafruit.com/product/5400 +adafruit_feather_esp32s2 Adafruit Feather ESP32S2 espressif https://www.adafruit.com/product/5000 +adafruit_feather_esp32s3 Adafruit Feather ESP32S3 espressif https://www.adafruit.com/product/5323 +adafruit_magtag_29gray Adafruit MagTag 2.9" Grayscale espressif https://www.adafruit.com/product/4800 +adafruit_metro_esp32s2 Adafruit Metro ESP32-S2 espressif https://www.adafruit.com/product/4775 +espressif_addax_1 Espresif Addax-1 espressif n/a +espressif_c3_devkitc Espresif C3 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c3/esp32-c3-devkitc-02/index.html +espressif_c6_devkitc Espresif C6 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html +espressif_kaluga_1 Espresif Kaluga 1 espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-kaluga-1/index.html +espressif_p4_function_ev Espresif P4 Function EV espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32p4/esp32-p4-function-ev-board/index.html +espressif_s2_devkitc Espresif S2 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitc-1/index.html +espressif_s3_devkitc Espresif S3 DevKitC espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitc-1/index.html +espressif_s3_devkitm Espresif S3 DevKitM espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitm-1/index.html +espressif_saola_1 Espresif S2 Saola 1 espressif https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-saola-1/index.html +========================= ============================== ========= ======================================================================================================== ====== + +GigaDevice +========== + +================== ================== ========= ============================= ====== +Board Name Family URL Note +================== ================== ========= ============================= ====== +sipeed_longan_nano Sipeed Longan Nano gd32vf103 https://longan.sipeed.com/en/ +================== ================== ========= ============================= ====== + +Infineon +======== + +============= ================= ======== ============================================================================= ====== +Board Name Family URL Note +============= ================= ======== ============================================================================= ====== +xmc4500_relax XMC4500 relax kit xmc4000 https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc45_relax_v1/ +xmc4700_relax XMC4700 relax kit xmc4000 https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_v1/ +============= ================= ======== ============================================================================= ====== + +Microchip +========= + +========================= =================================== ========== ================================================================================= ====== +Board Name Family URL Note +========================= =================================== ========== ================================================================================= ====== +olimex_emz64 Olimex PIC32-EMZ64 pic32mz https://www.olimex.com/Products/PIC/Development/PIC32-EMZ64/open-source-hardware +olimex_hmz144 Olimex PIC32-HMZ144 pic32mz https://www.olimex.com/Products/PIC/Development/PIC32-HMZ144/open-source-hardware +cynthion_d11 Great Scott Gadgets Cynthion samd11 https://greatscottgadgets.com/cynthion/ +samd11_xplained SAMD11 Xplained Pro samd11 https://www.microchip.com/en-us/development-tool/ATSAMD11-XPRO +atsamd21_xpro SAMD21 Xplained Pro samd21 https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMD21-XPRO +circuitplayground_express Adafruit Circuit Playground Express samd21 https://www.adafruit.com/product/3333 +curiosity_nano SAMD21 Curiosty Nano samd21 https://www.microchip.com/en-us/development-tool/dm320119 +cynthion_d21 Great Scott Gadgets Cynthion samd21 https://greatscottgadgets.com/cynthion/ +feather_m0_express Adafruit Feather M0 Express samd21 https://www.adafruit.com/product/3403 +itsybitsy_m0 Adafruit ItsyBitsy M0 samd21 https://www.adafruit.com/product/3727 +metro_m0_express Adafruit Metro M0 Express samd21 https://www.adafruit.com/product/3505 +qtpy Adafruit QT Py samd21 https://www.adafruit.com/product/4600 +seeeduino_xiao Seeeduino XIAO samd21 https://wiki.seeedstudio.com/Seeeduino-XIAO/ +sparkfun_samd21_mini_usb SparkFun SAMD21 Mini samd21 https://www.sparkfun.com/products/13664 +trinket_m0 Adafruit Trinket M0 samd21 https://www.adafruit.com/product/3500 +d5035_01 D5035-01 samd5x_e5x https://github.com/RudolphRiedel/USB_CAN-FD +feather_m4_express Adafruit Feather M4 Express samd5x_e5x https://www.adafruit.com/product/3857 +itsybitsy_m4 Adafruit ItsyBitsy M4 samd5x_e5x https://www.adafruit.com/product/3800 +metro_m4_express Adafruit Metro M4 Express samd5x_e5x https://www.adafruit.com/product/3382 +pybadge Adafruit PyBadge samd5x_e5x https://www.adafruit.com/product/4200 +pyportal Adafruit PyPortal samd5x_e5x https://www.adafruit.com/product/4116 +same54_xplained SAME54 Xplained Pro samd5x_e5x https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAME54-XPRO +samg55_xplained SAMG55 Xplained Pro samg https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMG55-XPRO +atsaml21_xpro SAML21 Xplained Pro saml2x https://www.microchip.com/en-us/development-tool/atsaml21-xpro-b +saml22_feather SAML22 Feather saml2x https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather +sensorwatch_m0 SensorWatch saml2x https://github.com/joeycastillo/Sensor-Watch +========================= =================================== ========== ================================================================================= ====== + +MindMotion +========== + +===================== ====================================== ======== =============================================================================================== ====== +Board Name Family URL Note +===================== ====================================== ======== =============================================================================================== ====== +mm32f327x_mb39 MM32F3273G9P MB-039 mm32 https://www.mindmotion.com.cn/support/development_tools/evaluation_boards/evboard/mm32f3273g9p/ +mm32f327x_pitaya_lite DshanMCU Pitaya Lite with MM32F3273G8P mm32 https://gitee.com/weidongshan/DshanMCU-Pitaya-c +===================== ====================================== ======== =============================================================================================== ====== + +NXP +=== + +================== ========================================= ============= ========================================================================================================================================================================= ====== +Board Name Family URL Note +================== ========================================= ============= ========================================================================================================================================================================= ====== +metro_m7_1011 Adafruit Metro M7 1011 imxrt https://www.adafruit.com/product/5600 +metro_m7_1011_sd Adafruit Metro M7 1011 SD imxrt https://www.adafruit.com/product/5600 +mimxrt1010_evk i.MX RT1010 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1010-evaluation-kit:MIMXRT1010-EVK +mimxrt1015_evk i.MX RT1015 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1015-EVK +mimxrt1020_evk i.MX RT1020 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1020-EVK +mimxrt1024_evk i.MX RT1024 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1024-evaluation-kit:MIMXRT1024-EVK +mimxrt1050_evkb i.MX RT1050 Evaluation Kit revB imxrt https://www.nxp.com/part/IMXRT1050-EVKB +mimxrt1060_evk i.MX RT1060 Evaluation Kit revB imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1060-EVKB +mimxrt1064_evk i.MX RT1064 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1064-EVK +mimxrt1170_evkb i.MX RT1070 Evaluation Kit imxrt https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1170-evaluation-kit:MIMXRT1170-EVKB +teensy_40 Teensy 4.0 imxrt https://www.pjrc.com/store/teensy40.html +teensy_41 Teensy 4.1 imxrt https://www.pjrc.com/store/teensy41.html +frdm_k64f Freedom K64F kinetis_k https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-k64-k63-and-k24-mcus:FRDM-K64F +teensy_35 Teensy 3.5 kinetis_k https://www.pjrc.com/store/teensy35.html +frdm_k32l2a4s Freedom K32L2A4S kinetis_k32l2 https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-K32L2A4S +frdm_k32l2b Freedom K32L2B3 kinetis_k32l2 https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/nxp-freedom-development-platform-for-k32-l2b-mcus:FRDM-K32L2B3 +kuiic Kuiic kinetis_k32l2 https://github.com/nxf58843/kuiic +frdm_kl25z fomu kinetis_kl https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z +lpcxpresso11u37 LPCXpresso11U37 lpc11 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13074 +lpcxpresso11u68 LPCXpresso11U68 lpc11 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13058 +lpcxpresso1347 LPCXpresso1347 lpc13 https://www.nxp.com/products/no-longer-manufactured/lpcxpresso-board-for-lpc1347:OM13045 +lpcxpresso1549 LPCXpresso1549 lpc15 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13056 +lpcxpresso1769 LPCXpresso1769 lpc17 https://www.nxp.com/design/design-center/development-boards-and-designs/OM13000 +mbed1768 mbed 1768 lpc17 https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-arm-cortex-m3/arm-mbed-lpc1768-board:OM11043 +lpcxpresso18s37 LPCXpresso18s37 lpc18 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso18s37-development-board:OM13076 +mcb1800 Keil MCB1800 lpc18 https://www.keil.com/arm/mcb1800/ +ea4088_quickstart Embedded Artists LPC4088 QuickStart Board lpc40 https://www.embeddedartists.com/products/lpc4088-quickstart-board/ +ea4357 Embedded Artists LPC4357 Development Kit lpc43 https://www.embeddedartists.com/products/lpc4357-developers-kit/ +lpcxpresso43s67 LPCXpresso43S67 lpc43 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso43s67-development-board:OM13084 +lpcxpresso51u68 LPCXpresso51u68 lpc51 https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005 +lpcxpresso54114 LPCXpresso54114 lpc54 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54114-board:OM13089 +lpcxpresso54608 LPCXpresso54608 lpc54 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-development-board-for-lpc5460x-mcus:OM13092 +lpcxpresso54628 LPCXpresso54628 lpc54 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54628-development-board:OM13098 +double_m33_express Double M33 Express lpc55 https://www.crowdsupply.com/steiert-solutions/double-m33-express +lpcxpresso55s28 LPCXpresso55s28 lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s28-development-board:LPC55S28-EVK +lpcxpresso55s69 LPCXpresso55s69 lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s69-development-board:LPC55S69-EVK +mcu_link MCU Link lpc55 https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/mcu-link-debug-probe:MCU-LINK +frdm_mcxa153 Freedom MCXA153 mcx https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXA153 +frdm_mcxn947 Freedom MCXN947 mcx https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXN947 +mcxn947brk MCXN947 Breakout mcx n/a +================== ========================================= ============= ========================================================================================================================================================================= ====== + +Nordic Semiconductor +==================== + +=========================== ===================================== ======== ============================================================================== ====== +Board Name Family URL Note +=========================== ===================================== ======== ============================================================================== ====== +adafruit_clue Adafruit CLUE nrf https://www.adafruit.com/product/4500 +arduino_nano33_ble Arduino Nano 33 BLE nrf https://store.arduino.cc/arduino-nano-33-ble +circuitplayground_bluefruit Adafruit Circuit Playground Bluefruit nrf https://www.adafruit.com/product/4333 +feather_nrf52840_express Adafruit Feather nRF52840 Express nrf https://www.adafruit.com/product/4062 +feather_nrf52840_sense Adafruit Feather nRF52840 Sense nrf https://www.adafruit.com/product/4516 +itsybitsy_nrf52840 Adafruit ItsyBitsy nRF52840 Express nrf https://www.adafruit.com/product/4481 +pca10056 Nordic nRF52840DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK +pca10059 Nordic nRF52840 Dongle nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle +pca10095 Nordic nRF5340 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK +pca10100 Nordic nRF52833 DK nrf https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK +=========================== ===================================== ======== ============================================================================== ====== + +Raspberry Pi +============ + +================= ================= ============== ========================================================== ====== +Board Name Family URL Note +================= ================= ============== ========================================================== ====== +raspberrypi_zero Raspberry Pi Zero broadcom_32bit https://www.raspberrypi.org/products/raspberry-pi-zero/ +raspberrypi_cm4 Raspberry CM4 broadcom_64bit https://www.raspberrypi.org/products/compute-module-4 +raspberrypi_zero2 Raspberry Zero2 broadcom_64bit https://www.raspberrypi.org/products/raspberry-pi-zero-2-w +================= ================= ============== ========================================================== ====== + +Renesas +======= + +============== =========================== ======== ================================================================================================================================================================ ====== +Board Name Family URL Note +============== =========================== ======== ================================================================================================================================================================ ====== +da14695_dk_usb DA14695-00HQDEVKT-U da1469x https://www.renesas.com/en/products/wireless-connectivity/bluetooth-low-energy/da14695-00hqdevkt-u-smartbond-da14695-bluetooth-low-energy-52-usb-development-kit +da1469x_dk_pro DA1469x Development Kit Pro da1469x https://lpccs-docs.renesas.com/um-b-090-da1469x_getting_started/DA1469x_The_hardware/DA1469x_The_hardware.html +portenta_c33 Arduino Portenta C33 ra https://www.arduino.cc/pro/hardware-product-portenta-c33/ +ra2a1_ek RA2A1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra2a1-evaluation-kit-ra2a1-mcu-group +ra4m1_ek RA4M1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m1-evaluation-kit-ra4m1-mcu-group +ra4m3_ek RA4M3 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m3-evaluation-kit-ra4m3-mcu-group +ra6m1_ek RA6M1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m1-evaluation-kit-ra6m1-mcu-group +ra6m5_ek RA6M5 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m5-evaluation-kit-ra6m5-mcu-group +ra8m1_ek RA8M1 EK ra https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra8m1-evaluation-kit-ra8m1-mcu-group +uno_r4 Arduino UNO R4 ra https://store-usa.arduino.cc/pages/uno-r4 +============== =========================== ======== ================================================================================================================================================================ ====== + +STMicroelectronics +================== + +=================== ================================= ======== ================================================================= ====== +Board Name Family URL Note +=================== ================================= ======== ================================================================= ====== +stm32c071nucleo STM32C071 Nucleo stm32c0 https://www.st.com/en/evaluation-tools/nucleo-g071rb.html +stm32f070rbnucleo STM32 F070 Nucleo stm32f0 https://www.st.com/en/evaluation-tools/nucleo-f070rb.html +stm32f072disco STM32 F072 Discovery stm32f0 https://www.st.com/en/evaluation-tools/32f072bdiscovery.html +stm32f072eval STM32 F072 Eval stm32f0 https://www.st.com/en/evaluation-tools/stm32072b-eval.html +stm32f103_bluepill STM32 F103 Bluepill stm32f1 https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill +stm32f103_mini_2 STM32 F103 Mini v2 stm32f1 https://stm32-base.org/boards/STM32F103RCT6-STM32-Mini-V2.0 +stm32f103ze_iar IAR STM32 F103ze starter kit stm32f1 n/a +stm32f207nucleo STM32 F207 Nucleo stm32f2 https://www.st.com/en/evaluation-tools/nucleo-f207zg.html +stm32f303disco STM32 F303 Discovery stm32f3 https://www.st.com/en/evaluation-tools/stm32f3discovery.html +feather_stm32f405 Adafruit Feather STM32F405 stm32f4 https://www.adafruit.com/product/4382 +pyboardv11 Pyboard v1.1 stm32f4 https://www.adafruit.com/product/2390 +stm32f401blackpill STM32 F401 Blackpill stm32f4 https://stm32-base.org/boards/STM32F401CCU6-WeAct-Black-Pill-V1.2 +stm32f407blackvet STM32 F407 Blackvet stm32f4 https://stm32-base.org/boards/STM32F407VET6-STM32-F4VE-V2.0 +stm32f407disco STM32 F407 Discovery stm32f4 https://www.st.com/en/evaluation-tools/stm32f4discovery.html +stm32f411blackpill STM32 F411 Blackpill stm32f4 https://stm32-base.org/boards/STM32F411CEU6-WeAct-Black-Pill-V2.0 +stm32f411disco STM32 F411 Discovery stm32f4 https://www.st.com/en/evaluation-tools/32f411ediscovery.html +stm32f412disco STM32 F412 Discovery stm32f4 https://www.st.com/en/evaluation-tools/32f412gdiscovery.html +stm32f412nucleo STM32 F412 Nucleo stm32f4 https://www.st.com/en/evaluation-tools/nucleo-f412zg.html +stm32f439nucleo STM32 F439 Nucleo stm32f4 https://www.st.com/en/evaluation-tools/nucleo-f439zi.html +stlinkv3mini Stlink-v3 mini stm32f7 https://www.st.com/en/development-tools/stlink-v3mini.html +stm32f723disco STM32 F723 Discovery stm32f7 https://www.st.com/en/evaluation-tools/32f723ediscovery.html +stm32f746disco STM32 F746 Discovery stm32f7 https://www.st.com/en/evaluation-tools/32f746gdiscovery.html +stm32f746nucleo STM32 F746 Nucleo stm32f7 https://www.st.com/en/evaluation-tools/nucleo-f746zg.html +stm32f767nucleo STM32 F767 Nucleo stm32f7 https://www.st.com/en/evaluation-tools/nucleo-f767zi.html +stm32f769disco STM32 F769 Discovery stm32f7 https://www.st.com/en/evaluation-tools/32f769idiscovery.html +stm32g0b1nucleo STM32 G0B1 Nucleo stm32g0 https://www.st.com/en/evaluation-tools/nucleo-g0b1re.html +b_g474e_dpow1 STM32 B-G474E-DPOW1 Discovery kit stm32g4 https://www.st.com/en/evaluation-tools/b-g474e-dpow1.html +stm32g474nucleo STM32 G474 Nucleo stm32g4 https://www.st.com/en/evaluation-tools/nucleo-g474re.html +stm32g491nucleo STM32 G491 Nucleo stm32g4 https://www.st.com/en/evaluation-tools/nucleo-g491re.html +stm32h503nucleo STM32 H503 Nucleo stm32h5 https://www.st.com/en/evaluation-tools/nucleo-h503rb.html +stm32h563nucleo STM32 H563 Nucleo stm32h5 https://www.st.com/en/evaluation-tools/nucleo-h563zi.html +stm32h573i_dk STM32 H573i Discovery stm32h5 https://www.st.com/en/evaluation-tools/stm32h573i-dk.html +daisyseed Daisy Seed stm32h7 https://electro-smith.com/products/daisy-seed +stm32h723nucleo STM32 H723 Nucleo stm32h7 https://www.st.com/en/evaluation-tools/nucleo-h723zg.html +stm32h743eval STM32 H743 Eval stm32h7 https://www.st.com/en/evaluation-tools/stm32h743i-eval.html +stm32h743nucleo STM32 H743 Nucleo stm32h7 https://www.st.com/en/evaluation-tools/nucleo-h743zi.html +stm32h745disco STM32 H745 Discovery stm32h7 https://www.st.com/en/evaluation-tools/stm32h745i-disco.html +stm32h750_weact STM32 H750 WeAct stm32h7 https://www.adafruit.com/product/5032 +stm32h750bdk STM32 H750b Discovery Kit stm32h7 https://www.st.com/en/evaluation-tools/stm32h750b-dk.html +waveshare_openh743i Waveshare Open H743i stm32h7 https://www.waveshare.com/openh743i-c-standard.htm +stm32l052dap52 STM32 L052 DAP stm32l0 n/a +stm32l0538disco STM32 L0538 Discovery stm32l0 https://www.st.com/en/evaluation-tools/32l0538discovery.html +stm32l412nucleo STM32 L412 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l412kb.html +stm32l476disco STM32 L476 Disco stm32l4 https://www.st.com/en/evaluation-tools/32l476gdiscovery.html +stm32l4p5nucleo STM32 L4P5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html +stm32l4r5nucleo STM32 L4R5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html +b_u585i_iot2a STM32 B-U585i IOT2A Discovery kit stm32u5 https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html +stm32u545nucleo STM32 U545 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u545re-q.html +stm32u575eval STM32 U575 Eval stm32u5 https://www.st.com/en/evaluation-tools/stm32u575i-ev.html +stm32u575nucleo STM32 U575 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u575zi-q.html +stm32u5a5nucleo STM32 U5a5 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u5a5zj-q.html +stm32wb55nucleo STM32 P-NUCLEO-WB55 stm32wb https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html +=================== ================================= ======== ================================================================= ====== + +Sunxi +===== + +======= ================= ======== ========================================= ====== +Board Name Family URL Note +======= ================= ======== ========================================= ====== +f1c100s Lctech Pi F1C200s f1c100s https://linux-sunxi.org/Lctech_Pi_F1C200s +======= ================= ======== ========================================= ====== + +Texas Instruments +================= + +================= ===================== ======== ========================================= ====== +Board Name Family URL Note +================= ===================== ======== ========================================= ====== +msp_exp430f5529lp MSP430F5529 LaunchPad msp430 https://www.ti.com/tool/MSP-EXP430F5529LP +msp_exp432e401y MSP432E401Y LaunchPad msp432e4 https://www.ti.com/tool/MSP-EXP432E401Y +ek_tm4c123gxl TM4C123G LaunchPad tm4c https://www.ti.com/tool/EK-TM4C123GXL +================= ===================== ======== ========================================= ====== + +Tomu +==== + +======= ====== ======== ========================= ====== +Board Name Family URL Note +======= ====== ======== ========================= ====== +fomu fomu fomu https://tomu.im/fomu.html +======= ====== ======== ========================= ====== + +WCH +=== + +================ ================ ======== ===================================================================== ====== +Board Name Family URL Note +================ ================ ======== ===================================================================== ====== +ch32f205r-r0 CH32F205r-r0 ch32f20x https://github.com/openwch/ch32f20x +ch32v103r_r1_1v0 CH32V103R-R1-1v1 ch32v10x https://github.com/openwch/ch32v103/tree/main/SCHPCB/CH32V103R-R1-1v1 +ch32v203c_r0_1v0 CH32V203C-R0-1v0 ch32v20x https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +ch32v203g_r0_1v0 CH32V203G-R0-1v0 ch32v20x https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +nanoch32v203 nanoCH32V203 ch32v20x https://github.com/wuxx/nanoCH32V203 +ch32v307v_r1_1v0 CH32V307V-R1-1v0 ch32v307 https://github.com/openwch/ch32v307/tree/main/SCHPCB/CH32V307V-R1-1v0 +================ ================ ======== ===================================================================== ====== diff --git a/docs/reference/index.rst b/docs/reference/index.rst index 9ecdf619b..e9b033033 100644 --- a/docs/reference/index.rst +++ b/docs/reference/index.rst @@ -79,7 +79,8 @@ Index .. toctree:: :maxdepth: 2 - supported getting_started + supported + boards dependencies concurrency diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h index 84a106346..40a9dd198 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Raspberry Pi Zero + url: https://www.raspberrypi.org/products/raspberry-pi-zero/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index 0062e2e83..f8f3b0b70 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Raspberry Pi +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h index 84a106346..cadad2b27 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Raspberry CM4 + url: https://www.raspberrypi.org/products/compute-module-4 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h index 84a106346..e6caa0294 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Raspberry Zero2 + url: https://www.raspberrypi.org/products/raspberry-pi-zero-2-w +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index 0062e2e83..f8f3b0b70 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Raspberry Pi +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/brtmm90x/boards/mm900evxb/board.h b/hw/bsp/brtmm90x/boards/mm900evxb/board.h index 771779108..623033c2c 100644 --- a/hw/bsp/brtmm90x/boards/mm900evxb/board.h +++ b/hw/bsp/brtmm90x/boards/mm900evxb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MM900EVxB + url: https://brtchip.com/product/mm900ev1b +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 4d81e7d52..15ff4b8ee 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Bridgetek +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h index d5849bddb..b855804a9 100644 --- a/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h +++ b/hw/bsp/ch32f20x/boards/ch32f205r-r0/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: CH32F205r-r0 + url: https://github.com/openwch/ch32f20x +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32f20x/family.c b/hw/bsp/ch32f20x/family.c index 9717832d6..7fef71d47 100644 --- a/hw/bsp/ch32f20x/family.c +++ b/hw/bsp/ch32f20x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: WCH +*/ + #include "stdio.h" #include "debug_uart.h" diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h index 3b1187c3a..1fde4244c 100644 --- a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: CH32V103R-R1-1v1 + url: https://github.com/openwch/ch32v103/tree/main/SCHPCB/CH32V103R-R1-1v1 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v10x/family.c b/hw/bsp/ch32v10x/family.c index 15f754e11..f25102494 100644 --- a/hw/bsp/ch32v10x/family.c +++ b/hw/bsp/ch32v10x/family.c @@ -1,3 +1,7 @@ +/* metadata: + manufacturer: WCH +*/ + #include // https://github.com/openwch/ch32v307/pull/90 diff --git a/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h b/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h index 692cf11bf..256958088 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h +++ b/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: CH32V203C-R0-1v0 + url: https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h b/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h index 783831edd..827226d80 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h +++ b/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: CH32V203G-R0-1v0 + url: https://github.com/openwch/ch32v20x/tree/main/SCHPCB/CH32V203C-R0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.h b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h index 64eaf931e..f02fceced 100644 --- a/hw/bsp/ch32v20x/boards/nanoch32v203/board.h +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: nanoCH32V203 + url: https://github.com/wuxx/nanoCH32V203 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index 43dd7e032..5f52d9447 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -1,3 +1,7 @@ +/* metadata: +manufacturer: WCH +*/ + #include // https://github.com/openwch/ch32v307/pull/90 diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h index 7b488096e..491347034 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h +++ b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: CH32V307V-R1-1v0 + url: https://github.com/openwch/ch32v307/tree/main/SCHPCB/CH32V307V-R1-1v0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index adf2dbea5..48eb8a38c 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: WCH +*/ + #include "stdio.h" // https://github.com/openwch/ch32v307/pull/90 diff --git a/hw/bsp/da1469x/boards/da14695_dk_usb/board.h b/hw/bsp/da1469x/boards/da14695_dk_usb/board.h index 5efdd43e0..c0810c2b6 100644 --- a/hw/bsp/da1469x/boards/da14695_dk_usb/board.h +++ b/hw/bsp/da1469x/boards/da14695_dk_usb/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: DA14695-00HQDEVKT-U + url: https://www.renesas.com/en/products/wireless-connectivity/bluetooth-low-energy/da14695-00hqdevkt-u-smartbond-da14695-bluetooth-low-energy-52-usb-development-kit +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h b/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h index f969acf90..2b61e810e 100644 --- a/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h +++ b/hw/bsp/da1469x/boards/da1469x_dk_pro/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: DA1469x Development Kit Pro + url: https://lpccs-docs.renesas.com/um-b-090-da1469x_getting_started/DA1469x_The_hardware/DA1469x_The_hardware.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/da1469x/family.c b/hw/bsp/da1469x/family.c index 70bedf6d9..a64ffce67 100644 --- a/hw/bsp/da1469x/family.c +++ b/hw/bsp/da1469x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Renesas +*/ + #include "bsp/board_api.h" #include "board.h" #include diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h index 0c53df06b..15e5091f9 100644 --- a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather ESP32 v2 + url: https://www.adafruit.com/product/5400 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h index 9aa2e7535..0f607c755 100644 --- a/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32s2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather ESP32S2 + url: https://www.adafruit.com/product/5000 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h index 9aa2e7535..35c268cf5 100644 --- a/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32s3/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather ESP32S3 + url: https://www.adafruit.com/product/5323 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h b/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h index 084a7aaf2..b86089400 100644 --- a/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h +++ b/hw/bsp/espressif/boards/adafruit_magtag_29gray/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit MagTag 2.9" Grayscale + url: https://www.adafruit.com/product/4800 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h b/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h index 137ea71ae..bc45678f7 100644 --- a/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h +++ b/hw/bsp/espressif/boards/adafruit_metro_esp32s2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro ESP32-S2 + url: https://www.adafruit.com/product/4775 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_addax_1/board.h b/hw/bsp/espressif/boards/espressif_addax_1/board.h index d4690f732..4a4a15e1b 100644 --- a/hw/bsp/espressif/boards/espressif_addax_1/board.h +++ b/hw/bsp/espressif/boards/espressif_addax_1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif Addax-1 + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h b/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h index 243dd47f6..a03cb5052 100644 --- a/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_c3_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif C3 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c3/esp32-c3-devkitc-02/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h b/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h index 243dd47f6..eedd36a89 100644 --- a/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_c6_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif C6 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32c6/esp32-c6-devkitc-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_kaluga_1/board.h b/hw/bsp/espressif/boards/espressif_kaluga_1/board.h index 613e6ae0c..d49dc2af6 100644 --- a/hw/bsp/espressif/boards/espressif_kaluga_1/board.h +++ b/hw/bsp/espressif/boards/espressif_kaluga_1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif Kaluga 1 + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-kaluga-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h index e57f7c51f..6f3229b70 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif P4 Function EV + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32p4/esp32-p4-function-ev-board/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h index e068efef9..9c197591f 100644 --- a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S2 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-devkitc-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h b/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h index a319fbc61..6d7a94668 100644 --- a/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_s3_devkitc/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S3 DevKitC + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitc-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h index a319fbc61..d01fdbe5b 100644 --- a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h +++ b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S3 DevKitM + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s3/esp32-s3-devkitm-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/espressif_saola_1/board.h b/hw/bsp/espressif/boards/espressif_saola_1/board.h index e068efef9..ea369f19c 100644 --- a/hw/bsp/espressif/boards/espressif_saola_1/board.h +++ b/hw/bsp/espressif/boards/espressif_saola_1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Espresif S2 Saola 1 + url: https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32s2/esp32-s2-saola-1/index.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 048b431fb..26e415d94 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Espressif +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.h b/hw/bsp/f1c100s/boards/f1c100s/board.h index 3b56a3a57..44b78f8fb 100644 --- a/hw/bsp/f1c100s/boards/f1c100s/board.h +++ b/hw/bsp/f1c100s/boards/f1c100s/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: Lctech Pi F1C200s + url: https://linux-sunxi.org/Lctech_Pi_F1C200s +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/f1c100s/family.c b/hw/bsp/f1c100s/family.c index 6df4a0ed8..9e864363f 100644 --- a/hw/bsp/f1c100s/family.c +++ b/hw/bsp/f1c100s/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Sunxi +*/ + #include #include #include diff --git a/hw/bsp/fomu/boards/fomu/board.h b/hw/bsp/fomu/boards/fomu/board.h index 666ba1d98..2651c823d 100644 --- a/hw/bsp/fomu/boards/fomu/board.h +++ b/hw/bsp/fomu/boards/fomu/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: fomu + url: https://tomu.im/fomu.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/fomu/family.c b/hw/bsp/fomu/family.c index ccf2b12f4..61943cb01 100644 --- a/hw/bsp/fomu/family.c +++ b/hw/bsp/fomu/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Tomu +*/ + #include #include #include "csr.h" diff --git a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h index fae7c40b7..cb564a340 100644 --- a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h +++ b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: Sipeed Longan Nano + url: https://longan.sipeed.com/en/ +*/ + #ifndef _NUCLEI_SDK_HAL_H #define _NUCLEI_SDK_HAL_H diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index d4a819fb3..9d15755fc 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: GigaDevice +*/ + #include "drv_usb_hw.h" #include "drv_usb_dev.h" diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 24141f5f4..ccc4d6b9a 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M7 1011 + url: https://www.adafruit.com/product/5600 +*/ + #ifndef BOARD_M7_1011_H_ #define BOARD_M7_1011_H_ diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h index 343e17f81..04d5b01b5 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M7 1011 SD + url: https://www.adafruit.com/product/5600 +*/ + #ifndef BOARD_METRO_M7_1011_SD_H_ #define BOARD_METRO_M7_1011_SD_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index da12075a0..6b9ec0ae1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1010 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1010-evaluation-kit:MIMXRT1010-EVK +*/ + #ifndef BOARD_MIMXRT1010_EVK_H_ #define BOARD_MIMXRT1010_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h index 6ac78453f..e2ec4e627 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1015 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1015-EVK +*/ + #ifndef BOARD_MIMXRT1015_EVK_H_ #define BOARD_MIMXRT1015_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index 4f4593524..3f9c97e11 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1020 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1020-EVK +*/ + #ifndef BOARD_MIMXRT1020_EVK_H_ #define BOARD_MIMXRT1020_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index 27a64b464..39e63c472 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1024 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1024-evaluation-kit:MIMXRT1024-EVK +*/ + #ifndef BOARD_MIMXRT1024_EVK_H_ #define BOARD_MIMXRT1024_EVK_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 97d1e446c..de7ab0535 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1050 Evaluation Kit revB + url: https://www.nxp.com/part/IMXRT1050-EVKB +*/ + #ifndef BOARD_MIMXRT1050_EVKB_H_ #define BOARD_MIMXRT1050_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 40b99860f..5bbacadaf 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1060 Evaluation Kit revB + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1060-EVKB +*/ + #ifndef BOARD_MIMXRT1060_EVKB_H_ #define BOARD_MIMXRT1060_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h index 7fca5adef..6dc01e3e7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1064 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/MIMXRT1064-EVK +*/ + #ifndef BOARD_MIMXRT1064_EVKB_H_ #define BOARD_MIMXRT1064_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h index 303935517..c5d54b7a7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: i.MX RT1070 Evaluation Kit + url: https://www.nxp.com/design/design-center/development-boards-and-designs/i-mx-evaluation-and-development-boards/i-mx-rt1170-evaluation-kit:MIMXRT1170-EVKB +*/ + #ifndef BOARD_MIMXRT1170_EVKB_H_ #define BOARD_MIMXRT1170_EVKB_H_ diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h index 4a173c834..ae749e894 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.h +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -24,11 +24,14 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Teensy 4.0 + url: https://www.pjrc.com/store/teensy40.html +*/ #ifndef BOARD_H_ #define BOARD_H_ - // required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (2 * 1024 * 1024) diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h index 358684126..1bc022c54 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.h +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -24,11 +24,14 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Teensy 4.1 + url: https://www.pjrc.com/store/teensy41.html +*/ #ifndef BOARD_H_ #define BOARD_H_ - // required since iMXRT MCUX-SDK include this file for board size #define BOARD_FLASH_SIZE (8 * 1024 * 1024) diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index f365981f5..ad529a227 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board/clock_config.h" #include "board/pin_mux.h" diff --git a/hw/bsp/kinetis_k/boards/frdm_k64f/board.h b/hw/bsp/kinetis_k/boards/frdm_k64f/board.h index ae8c66182..75a10f961 100644 --- a/hw/bsp/kinetis_k/boards/frdm_k64f/board.h +++ b/hw/bsp/kinetis_k/boards/frdm_k64f/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: Freedom K64F + url: https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-k64-k63-and-k24-mcus:FRDM-K64F +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/kinetis_k/boards/teensy_35/board.h b/hw/bsp/kinetis_k/boards/teensy_35/board.h index f8173447a..4718a0241 100644 --- a/hw/bsp/kinetis_k/boards/teensy_35/board.h +++ b/hw/bsp/kinetis_k/boards/teensy_35/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: Teensy 3.5 + url: https://www.pjrc.com/store/teensy35.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/kinetis_k/family.c b/hw/bsp/kinetis_k/family.c index 30dfe6d76..59d80fa18 100644 --- a/hw/bsp/kinetis_k/family.c +++ b/hw/bsp/kinetis_k/family.c @@ -23,6 +23,10 @@ * THE SOFTWARE. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h index 16f832722..9e2534307 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom K32L2A4S + url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-K32L2A4S +*/ #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h index 790d6fcb0..854340d6d 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom K32L2B3 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/nxp-freedom-development-platform-for-k32-l2b-mcus:FRDM-K32L2B3 +*/ #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/board.h b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h index ec3702376..f5895fc65 100644 --- a/hw/bsp/kinetis_k32l2/boards/kuiic/board.h +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Kuiic + url: https://github.com/nxf58843/kuiic +*/ #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/kinetis_k32l2/family.c b/hw/bsp/kinetis_k32l2/family.c index 92f5ba6d3..2fcc1b2af 100644 --- a/hw/bsp/kinetis_k32l2/family.c +++ b/hw/bsp/kinetis_k32l2/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "fsl_gpio.h" #include "fsl_port.h" #include "fsl_clock.h" diff --git a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h index 23f144666..b03fe91a8 100644 --- a/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h +++ b/hw/bsp/kinetis_kl/boards/frdm_kl25z/board.h @@ -22,6 +22,11 @@ * THE SOFTWARE. */ +/* metadata: + name: fomu + url: https://www.nxp.com/design/design-center/development-boards-and-designs/general-purpose-mcus/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c index 254a95176..fe864f3a0 100644 --- a/hw/bsp/kinetis_kl/family.c +++ b/hw/bsp/kinetis_kl/family.c @@ -23,6 +23,10 @@ * THE SOFTWARE. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h b/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h index 930462f28..c8a48eecb 100644 --- a/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h +++ b/hw/bsp/lpc11/boards/lpcxpresso11u37/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso11U37 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13074 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h index a12fcbef1..50141e4a5 100644 --- a/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h +++ b/hw/bsp/lpc11/boards/lpcxpresso11u68/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso11U68 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13058 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc11/family.c b/hw/bsp/lpc11/family.c index e75bc4919..566449ca0 100644 --- a/hw/bsp/lpc11/family.c +++ b/hw/bsp/lpc11/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wunused-parameter" diff --git a/hw/bsp/lpc13/boards/lpcxpresso1347/board.h b/hw/bsp/lpc13/boards/lpcxpresso1347/board.h index 71e608b46..acf29fdc6 100644 --- a/hw/bsp/lpc13/boards/lpcxpresso1347/board.h +++ b/hw/bsp/lpc13/boards/lpcxpresso1347/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso1347 + url: https://www.nxp.com/products/no-longer-manufactured/lpcxpresso-board-for-lpc1347:OM13045 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc13/family.c b/hw/bsp/lpc13/family.c index 7e04c1cf5..1faa54485 100644 --- a/hw/bsp/lpc13/family.c +++ b/hw/bsp/lpc13/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc15/boards/lpcxpresso1549/board.h b/hw/bsp/lpc15/boards/lpcxpresso1549/board.h index 5ed5b75b2..1be2045a9 100644 --- a/hw/bsp/lpc15/boards/lpcxpresso1549/board.h +++ b/hw/bsp/lpc15/boards/lpcxpresso1549/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso1549 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13056 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c index b9ce39648..e23fdec43 100644 --- a/hw/bsp/lpc15/family.c +++ b/hw/bsp/lpc15/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/board.h b/hw/bsp/lpc17/boards/lpcxpresso1769/board.h index d6aa98ed9..6f5c12854 100644 --- a/hw/bsp/lpc17/boards/lpcxpresso1769/board.h +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso1769 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/OM13000 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc17/boards/mbed1768/board.h b/hw/bsp/lpc17/boards/mbed1768/board.h index 2b3ddc905..2c75cede4 100644 --- a/hw/bsp/lpc17/boards/mbed1768/board.h +++ b/hw/bsp/lpc17/boards/mbed1768/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: mbed 1768 + url: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-arm-cortex-m3/arm-mbed-lpc1768-board:OM11043 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc17/family.c b/hw/bsp/lpc17/family.c index 79281ba41..7d3231f6a 100644 --- a/hw/bsp/lpc17/family.c +++ b/hw/bsp/lpc17/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h index f4c85ddc9..2cf4dbdf8 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso18s37 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso18s37-development-board:OM13076 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc18/boards/mcb1800/board.h b/hw/bsp/lpc18/boards/mcb1800/board.h index 93b3cd112..dba7a62a3 100644 --- a/hw/bsp/lpc18/boards/mcb1800/board.h +++ b/hw/bsp/lpc18/boards/mcb1800/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Keil MCB1800 + url: https://www.keil.com/arm/mcb1800/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 55ef31ee4..8f6dbcd4a 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.h b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h index d5489c154..ede0a306d 100644 --- a/hw/bsp/lpc40/boards/ea4088_quickstart/board.h +++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Embedded Artists LPC4088 QuickStart Board + url: https://www.embeddedartists.com/products/lpc4088-quickstart-board/ +*/ + #ifndef EA4088QS__BOARD_H #define EA4088QS__BOARD_H diff --git a/hw/bsp/lpc40/family.c b/hw/bsp/lpc40/family.c index d6c8ef32a..b8bc99452 100644 --- a/hw/bsp/lpc40/family.c +++ b/hw/bsp/lpc40/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "chip.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/lpc43/boards/ea4357/board.h b/hw/bsp/lpc43/boards/ea4357/board.h index fb52e32a7..fca617361 100644 --- a/hw/bsp/lpc43/boards/ea4357/board.h +++ b/hw/bsp/lpc43/boards/ea4357/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Embedded Artists LPC4357 Development Kit + url: https://www.embeddedartists.com/products/lpc4357-developers-kit/ +*/ + #ifndef _BOARD_EA4357_H #define _BOARD_EA4357_H diff --git a/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h b/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h index 4dd90fe29..4427905e8 100644 --- a/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h +++ b/hw/bsp/lpc43/boards/lpcxpresso43s67/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso43S67 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso43s67-development-board:OM13084 +*/ + #ifndef _BOARD_LPCXPRESSO43S67_H_ #define _BOARD_LPCXPRESSO43S67_H_ diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c index dfee9f5ea..fe6c7b0c8 100644 --- a/hw/bsp/lpc43/family.c +++ b/hw/bsp/lpc43/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + // Suppress warning caused by mcu driver #ifdef __GNUC__ #pragma GCC diagnostic push diff --git a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h index 0a3b37fda..151fae24b 100644 --- a/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h +++ b/hw/bsp/lpc51/boards/lpcxpresso51u68/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: LPCXpresso51u68 + url: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005 +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/lpc51/family.c b/hw/bsp/lpc51/family.c index a0667a741..0afe33d41 100644 --- a/hw/bsp/lpc51/family.c +++ b/hw/bsp/lpc51/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "fsl_device_registers.h" #include "fsl_gpio.h" #include "fsl_power.h" diff --git a/hw/bsp/lpc54/boards/lpcxpresso54114/board.h b/hw/bsp/lpc54/boards/lpcxpresso54114/board.h index b1ad4258c..c43ca9d7d 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54114/board.h +++ b/hw/bsp/lpc54/boards/lpcxpresso54114/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso54114 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54114-board:OM13089 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc54/boards/lpcxpresso54608/board.h b/hw/bsp/lpc54/boards/lpcxpresso54608/board.h index 8bbe18155..e985e97e0 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54608/board.h +++ b/hw/bsp/lpc54/boards/lpcxpresso54608/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso54608 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-development-board-for-lpc5460x-mcus:OM13092 +*/ + #ifndef BOARD_LPCXPRESSO54608_H_ #define BOARD_LPCXPRESSO54608_H_ diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.h b/hw/bsp/lpc54/boards/lpcxpresso54628/board.h index 670277512..837d26aef 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54628/board.h +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso54628 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso54628-development-board:OM13098 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 5e6ff2231..9b9b5841b 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "fsl_device_registers.h" #include "fsl_gpio.h" #include "fsl_power.h" diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.h b/hw/bsp/lpc55/boards/double_m33_express/board.h index 975e74e92..dc11e47fc 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.h +++ b/hw/bsp/lpc55/boards/double_m33_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Double M33 Express + url: https://www.crowdsupply.com/steiert-solutions/double-m33-express +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h index f85701b08..907aee6a4 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso55s28 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s28-development-board:LPC55S28-EVK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h index f85701b08..e18d5bbad 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: LPCXpresso55s69 + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/lpcxpresso-boards/lpcxpresso55s69-development-board:LPC55S69-EVK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/boards/mcu_link/board.h b/hw/bsp/lpc55/boards/mcu_link/board.h index 5e17cf9fd..1d71b3e79 100644 --- a/hw/bsp/lpc55/boards/mcu_link/board.h +++ b/hw/bsp/lpc55/boards/mcu_link/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MCU Link + url: https://www.nxp.com/design/design-center/software/development-software/mcuxpresso-software-and-tools-/mcu-link-debug-probe:MCU-LINK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 68ccf52d5..dbf8d71b7 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "board.h" #include "fsl_device_registers.h" diff --git a/hw/bsp/max32650/boards/max32650evkit/board.h b/hw/bsp/max32650/boards/max32650evkit/board.h index 196abdaca..65ed2659e 100644 --- a/hw/bsp/max32650/boards/max32650evkit/board.h +++ b/hw/bsp/max32650/boards/max32650evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32650 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32650/boards/max32650fthr/board.h b/hw/bsp/max32650/boards/max32650fthr/board.h index d80a8fcae..755fa15b5 100644 --- a/hw/bsp/max32650/boards/max32650fthr/board.h +++ b/hw/bsp/max32650/boards/max32650fthr/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32650 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32650/boards/max32651evkit/board.h b/hw/bsp/max32650/boards/max32651evkit/board.h index 196abdaca..0b49ff309 100644 --- a/hw/bsp/max32650/boards/max32651evkit/board.h +++ b/hw/bsp/max32650/boards/max32651evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32651 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32650/family.c b/hw/bsp/max32650/family.c index bb382cdd4..8f0e56734 100644 --- a/hw/bsp/max32650/family.c +++ b/hw/bsp/max32650/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/max32666/boards/max32666evkit/board.h b/hw/bsp/max32666/boards/max32666evkit/board.h index 0ab1483b8..54589444d 100644 --- a/hw/bsp/max32666/boards/max32666evkit/board.h +++ b/hw/bsp/max32666/boards/max32666evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32666 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32666/boards/max32666fthr/board.h b/hw/bsp/max32666/boards/max32666fthr/board.h index c719b748a..0caea5934 100644 --- a/hw/bsp/max32666/boards/max32666fthr/board.h +++ b/hw/bsp/max32666/boards/max32666fthr/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32666 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32666/family.c b/hw/bsp/max32666/family.c index f96393fe1..05306c6c9 100644 --- a/hw/bsp/max32666/family.c +++ b/hw/bsp/max32666/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/max32690/boards/apard32690/board.h b/hw/bsp/max32690/boards/apard32690/board.h index f94097ca9..87b9c4e88 100644 --- a/hw/bsp/max32690/boards/apard32690/board.h +++ b/hw/bsp/max32690/boards/apard32690/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: APARD32690-SL + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32690/boards/max32690evkit/board.h b/hw/bsp/max32690/boards/max32690evkit/board.h index 05d60f220..aa8dbb1de 100644 --- a/hw/bsp/max32690/boards/max32690evkit/board.h +++ b/hw/bsp/max32690/boards/max32690evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX32690 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max32690/family.c b/hw/bsp/max32690/family.c index 2418168d4..7ba5fbef3 100644 --- a/hw/bsp/max32690/family.c +++ b/hw/bsp/max32690/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/max78002/boards/max78002evkit/board.h b/hw/bsp/max78002/boards/max78002evkit/board.h index f8102c394..85d55d7de 100644 --- a/hw/bsp/max78002/boards/max78002evkit/board.h +++ b/hw/bsp/max78002/boards/max78002evkit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MAX78002 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/max78002/family.c b/hw/bsp/max78002/family.c index 8d51f141c..5c23f40f9 100644 --- a/hw/bsp/max78002/family.c +++ b/hw/bsp/max78002/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Analog Devices +*/ + #ifdef __GNUC__ #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.h b/hw/bsp/mcx/boards/frdm_mcxa153/board.h index e207d89d9..fb1290088 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.h +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom MCXA153 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXA153 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.h b/hw/bsp/mcx/boards/frdm_mcxn947/board.h index acb73363f..a35b6818a 100644 --- a/hw/bsp/mcx/boards/frdm_mcxn947/board.h +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Freedom MCXN947 + url: https://www.nxp.com/design/design-center/development-boards-and-designs/FRDM-MCXN947 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.h b/hw/bsp/mcx/boards/mcxn947brk/board.h index eae98bfa7..eef281787 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.h +++ b/hw/bsp/mcx/boards/mcxn947brk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MCXN947 Breakout + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index ce54097fe..2b9c60beb 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: NXP +*/ + #include "bsp/board_api.h" #include "fsl_device_registers.h" #include "fsl_gpio.h" diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/board.h b/hw/bsp/mm32/boards/mm32f327x_mb39/board.h index 3ac048cf1..ee0800030 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/board.h +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: MM32F3273G9P MB-039 + url: https://www.mindmotion.com.cn/support/development_tools/evaluation_boards/evboard/mm32f3273g9p/ +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h index 2b3f54a60..522d494a8 100644 --- a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h +++ b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: DshanMCU Pitaya Lite with MM32F3273G8P + url: https://gitee.com/weidongshan/DshanMCU-Pitaya-c +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/mm32/family.c b/hw/bsp/mm32/family.c index f0fd6d334..979efb6ca 100644 --- a/hw/bsp/mm32/family.c +++ b/hw/bsp/mm32/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: MindMotion +*/ + #include "hal_conf.h" #include "mm32_device.h" diff --git a/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h b/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h index ccfe321c2..8fbe5cc49 100644 --- a/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h +++ b/hw/bsp/msp430/boards/msp_exp430f5529lp/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MSP430F5529 LaunchPad + url: https://www.ti.com/tool/MSP-EXP430F5529LP +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/msp430/family.c b/hw/bsp/msp430/family.c index 5bb3d3866..a45bd5f93 100644 --- a/hw/bsp/msp430/family.c +++ b/hw/bsp/msp430/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Texas Instruments +*/ + #include "bsp/board_api.h" #include "board.h" #include "msp430.h" diff --git a/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h b/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h index 3130d663b..6206bb247 100644 --- a/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h +++ b/hw/bsp/msp432e4/boards/msp_exp432e401y/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: MSP432E401Y LaunchPad + url: https://www.ti.com/tool/MSP-EXP432E401Y +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/msp432e4/family.c b/hw/bsp/msp432e4/family.c index d5ef7f930..9a3b48b66 100644 --- a/hw/bsp/msp432e4/family.c +++ b/hw/bsp/msp432e4/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Texas Instruments +*/ + #include "bsp/board_api.h" #include "board.h" #include "msp.h" diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.h b/hw/bsp/nrf/boards/adafruit_clue/board.h index 8d6df786e..a5d90f608 100644 --- a/hw/bsp/nrf/boards/adafruit_clue/board.h +++ b/hw/bsp/nrf/boards/adafruit_clue/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit CLUE + url: https://www.adafruit.com/product/4500 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h index 00fa8d8ea..6e6a079ab 100644 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Arduino Nano 33 BLE + url: https://store.arduino.cc/arduino-nano-33-ble +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h index 3dd354efa..4cdac5f9f 100644 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Circuit Playground Bluefruit + url: https://www.adafruit.com/product/4333 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 3d59516d8..bfbb98677 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather nRF52840 Express + url: https://www.adafruit.com/product/4062 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h index 605deea24..288a1b52e 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather nRF52840 Sense + url: https://www.adafruit.com/product/4516 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h index 33c370f53..5f065eec0 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit ItsyBitsy nRF52840 Express + url: https://www.adafruit.com/product/4481 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h index 24d3faa65..ec632e769 100644 --- a/hw/bsp/nrf/boards/pca10056/board.h +++ b/hw/bsp/nrf/boards/pca10056/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF52840DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10059/board.h b/hw/bsp/nrf/boards/pca10059/board.h index ea3f4030d..3b95481ad 100644 --- a/hw/bsp/nrf/boards/pca10059/board.h +++ b/hw/bsp/nrf/boards/pca10059/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF52840 Dongle + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-Dongle +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10095/board.h b/hw/bsp/nrf/boards/pca10095/board.h index 846c2ee5b..1c7981049 100644 --- a/hw/bsp/nrf/boards/pca10095/board.h +++ b/hw/bsp/nrf/boards/pca10095/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF5340 DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF5340-DK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/boards/pca10100/board.h b/hw/bsp/nrf/boards/pca10100/board.h index 2b2579732..8aca6dce9 100644 --- a/hw/bsp/nrf/boards/pca10100/board.h +++ b/hw/bsp/nrf/boards/pca10100/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Nordic nRF52833 DK + url: https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52833-DK +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 885910f9a..f3132eeb1 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Nordic Semiconductor +*/ + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/pic32mz/boards/olimex_emz64/board.h b/hw/bsp/pic32mz/boards/olimex_emz64/board.h new file mode 100644 index 000000000..7f42e024f --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_emz64/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Olimex PIC32-EMZ64 + url: https://www.olimex.com/Products/PIC/Development/PIC32-EMZ64/open-source-hardware +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/pic32mz/boards/olimex_hmz144/board.h b/hw/bsp/pic32mz/boards/olimex_hmz144/board.h new file mode 100644 index 000000000..c9c07bf77 --- /dev/null +++ b/hw/bsp/pic32mz/boards/olimex_hmz144/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Olimex PIC32-HMZ144 + url: https://www.olimex.com/Products/PIC/Development/PIC32-HMZ144/open-source-hardware +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c index 895e23899..da97f67a9 100644 --- a/hw/bsp/pic32mz/family.c +++ b/hw/bsp/pic32mz/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include #include #include diff --git a/hw/bsp/ra/boards/portenta_c33/board.h b/hw/bsp/ra/boards/portenta_c33/board.h index ba663d040..7853c2dbd 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.h +++ b/hw/bsp/ra/boards/portenta_c33/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Arduino Portenta C33 + url: https://www.arduino.cc/pro/hardware-product-portenta-c33/ +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h index ba663d040..d925fc551 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/board.h +++ b/hw/bsp/ra/boards/ra2a1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA2A1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra2a1-evaluation-kit-ra2a1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h index ba663d040..e146261be 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/board.h +++ b/hw/bsp/ra/boards/ra4m1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA4M1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m1-evaluation-kit-ra4m1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.h b/hw/bsp/ra/boards/ra4m3_ek/board.h index 9dd2545a0..8b277f6f0 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.h +++ b/hw/bsp/ra/boards/ra4m3_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA4M3 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m3-evaluation-kit-ra4m3-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h index ba663d040..2024a0335 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/board.h +++ b/hw/bsp/ra/boards/ra6m1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA6M1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m1-evaluation-kit-ra6m1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h index 33dda99b4..32ede3a97 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.h +++ b/hw/bsp/ra/boards/ra6m5_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA6M5 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra6m5-evaluation-kit-ra6m5-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.h b/hw/bsp/ra/boards/ra8m1_ek/board.h index 33dda99b4..54672452f 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/board.h +++ b/hw/bsp/ra/boards/ra8m1_ek/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: RA8M1 EK + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra8m1-evaluation-kit-ra8m1-mcu-group +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h index 2c262bb9b..4e7ebb5ce 100644 --- a/hw/bsp/ra/boards/uno_r4/board.h +++ b/hw/bsp/ra/boards/uno_r4/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Arduino UNO R4 + url: https://store-usa.arduino.cc/pages/uno-r4 +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 523b6ff55..0fd24e493 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Renesas +*/ + #include #ifdef __GNUC__ diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index 733e93797..5dbb1dd37 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Pico + url: https://www.raspberrypi.org/products/raspberry-pi-pico/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 452a5568f..24aa0b616 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Raspberry Pi +*/ + #include "pico/stdlib.h" #include "pico/binary_info.h" #include "pico/unique_id.h" diff --git a/hw/bsp/rx/boards/gr_citrus/board.h b/hw/bsp/rx/boards/gr_citrus/board.h new file mode 100644 index 000000000..617d309c3 --- /dev/null +++ b/hw/bsp/rx/boards/gr_citrus/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: GR Citrus + url: https://www.renesas.com/en/products/gadget-renesas/boards/gr-citrus +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/rx/boards/rx65n_target/board.h b/hw/bsp/rx/boards/rx65n_target/board.h new file mode 100644 index 000000000..8c8e7b95f --- /dev/null +++ b/hw/bsp/rx/boards/rx65n_target/board.h @@ -0,0 +1,43 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: RX65N Target Board + url: https://www.renesas.com/en/products/microcontrollers-microprocessors/rx-32-bit-performance-efficiency-mcus/rtk5rx65n0c00000br-target-board-rx65n +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd11/boards/cynthion_d11/board.h b/hw/bsp/samd11/boards/cynthion_d11/board.h index b13c8eeea..8916e9b83 100644 --- a/hw/bsp/samd11/boards/cynthion_d11/board.h +++ b/hw/bsp/samd11/boards/cynthion_d11/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Great Scott Gadgets Cynthion + url: https://greatscottgadgets.com/cynthion/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd11/boards/samd11_xplained/board.h b/hw/bsp/samd11/boards/samd11_xplained/board.h index 2bbec4958..13045ac1d 100644 --- a/hw/bsp/samd11/boards/samd11_xplained/board.h +++ b/hw/bsp/samd11/boards/samd11_xplained/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAMD11 Xplained Pro + url: https://www.microchip.com/en-us/development-tool/ATSAMD11-XPRO +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c index a6588805a..79ca9de02 100644 --- a/hw/bsp/samd11/family.c +++ b/hw/bsp/samd11/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/samd21/boards/atsamd21_xpro/board.h b/hw/bsp/samd21/boards/atsamd21_xpro/board.h index 315e40c78..6d2e40c56 100644 --- a/hw/bsp/samd21/boards/atsamd21_xpro/board.h +++ b/hw/bsp/samd21/boards/atsamd21_xpro/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAMD21 Xplained Pro + url: https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMD21-XPRO +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.h b/hw/bsp/samd21/boards/circuitplayground_express/board.h index 0037db00d..6a4ec32a9 100644 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.h +++ b/hw/bsp/samd21/boards/circuitplayground_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Circuit Playground Express + url: https://www.adafruit.com/product/3333 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.h b/hw/bsp/samd21/boards/curiosity_nano/board.h index 1a4a833a3..78d701ec9 100644 --- a/hw/bsp/samd21/boards/curiosity_nano/board.h +++ b/hw/bsp/samd21/boards/curiosity_nano/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAMD21 Curiosty Nano + url: https://www.microchip.com/en-us/development-tool/dm320119 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/cynthion_d21/board.h b/hw/bsp/samd21/boards/cynthion_d21/board.h index 776063636..6a2b8c5c6 100644 --- a/hw/bsp/samd21/boards/cynthion_d21/board.h +++ b/hw/bsp/samd21/boards/cynthion_d21/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Great Scott Gadgets Cynthion + url: https://greatscottgadgets.com/cynthion/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h index 56ae3230d..a7f9122ee 100644 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ b/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather M0 Express + url: https://www.adafruit.com/product/3403 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/hw/bsp/samd21/boards/itsybitsy_m0/board.h index 6ee814da5..15a0afb15 100644 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.h +++ b/hw/bsp/samd21/boards/itsybitsy_m0/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit ItsyBitsy M0 + url: https://www.adafruit.com/product/3727 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.h b/hw/bsp/samd21/boards/metro_m0_express/board.h index 6dd53e901..405c92b02 100644 --- a/hw/bsp/samd21/boards/metro_m0_express/board.h +++ b/hw/bsp/samd21/boards/metro_m0_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M0 Express + url: https://www.adafruit.com/product/3505 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/qtpy/board.h b/hw/bsp/samd21/boards/qtpy/board.h index 9ba39e966..29a9f727f 100644 --- a/hw/bsp/samd21/boards/qtpy/board.h +++ b/hw/bsp/samd21/boards/qtpy/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit QT Py + url: https://www.adafruit.com/product/4600 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/hw/bsp/samd21/boards/seeeduino_xiao/board.h index 1bd63d6d9..0a6d1fc7d 100644 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.h +++ b/hw/bsp/samd21/boards/seeeduino_xiao/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Seeeduino XIAO + url: https://wiki.seeedstudio.com/Seeeduino-XIAO/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h index 60a86d743..85be34008 100644 --- a/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h +++ b/hw/bsp/samd21/boards/sparkfun_samd21_mini_usb/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SparkFun SAMD21 Mini + url: https://www.sparkfun.com/products/13664 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd21/boards/trinket_m0/board.h b/hw/bsp/samd21/boards/trinket_m0/board.h index c94a3abb6..22e7cb77f 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.h +++ b/hw/bsp/samd21/boards/trinket_m0/board.h @@ -23,6 +23,11 @@ * */ +/* metadata: + name: Adafruit Trinket M0 + url: https://www.adafruit.com/product/3500 +*/ + #pragma once // LED diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index 7ca20c458..c360a4a5a 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/samd5x_e5x/boards/d5035_01/board.h b/hw/bsp/samd5x_e5x/boards/d5035_01/board.h index 2cf59f5d1..4eb4a4ebe 100644 --- a/hw/bsp/samd5x_e5x/boards/d5035_01/board.h +++ b/hw/bsp/samd5x_e5x/boards/d5035_01/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: D5035-01 + url: https://github.com/RudolphRiedel/USB_CAN-FD +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h b/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h index 83de04266..edb965c9d 100644 --- a/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h +++ b/hw/bsp/samd5x_e5x/boards/feather_m4_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather M4 Express + url: https://www.adafruit.com/product/3857 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h b/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h index 272315771..d41ca4ac3 100644 --- a/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h +++ b/hw/bsp/samd5x_e5x/boards/itsybitsy_m4/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit ItsyBitsy M4 + url: https://www.adafruit.com/product/3800 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h b/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h index b3b80db89..b2eaaa54d 100644 --- a/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h +++ b/hw/bsp/samd5x_e5x/boards/metro_m4_express/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Metro M4 Express + url: https://www.adafruit.com/product/3382 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/pybadge/board.h b/hw/bsp/samd5x_e5x/boards/pybadge/board.h index 4629643fd..a5d447db6 100644 --- a/hw/bsp/samd5x_e5x/boards/pybadge/board.h +++ b/hw/bsp/samd5x_e5x/boards/pybadge/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit PyBadge + url: https://www.adafruit.com/product/4200 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/pyportal/board.h b/hw/bsp/samd5x_e5x/boards/pyportal/board.h index ff04c900b..e635e1375 100644 --- a/hw/bsp/samd5x_e5x/boards/pyportal/board.h +++ b/hw/bsp/samd5x_e5x/boards/pyportal/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit PyPortal + url: https://www.adafruit.com/product/4116 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h b/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h index faaa52b8e..6c252f9d0 100644 --- a/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h +++ b/hw/bsp/samd5x_e5x/boards/same54_xplained/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAME54 Xplained Pro + url: https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAME54-XPRO +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/samd5x_e5x/family.c b/hw/bsp/samd5x_e5x/family.c index abaee353b..8ceddb1be 100644 --- a/hw/bsp/samd5x_e5x/family.c +++ b/hw/bsp/samd5x_e5x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/samg/boards/samg55_xplained/board.h b/hw/bsp/samg/boards/samg55_xplained/board.h index c94cda198..53c557ef0 100644 --- a/hw/bsp/samg/boards/samg55_xplained/board.h +++ b/hw/bsp/samg/boards/samg55_xplained/board.h @@ -1,3 +1,8 @@ +/* metadata: + name: SAMG55 Xplained Pro + url: https://www.microchip.com/DevelopmentTools/ProductDetails/ATSAMG55-XPRO +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/samg/family.c b/hw/bsp/samg/family.c index 63db5739d..8db429e79 100644 --- a/hw/bsp/samg/family.c +++ b/hw/bsp/samg/family.c @@ -23,6 +23,10 @@ * */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h index 315e40c78..b93b4e591 100644 --- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h +++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAML21 Xplained Pro + url: https://www.microchip.com/en-us/development-tool/atsaml21-xpro-b +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.h b/hw/bsp/saml2x/boards/saml22_feather/board.h index 72e9897b6..f8660c3f8 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/board.h +++ b/hw/bsp/saml2x/boards/saml22_feather/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SAML22 Feather + url: https://github.com/joeycastillo/Feather-Projects/tree/main/SAML22%20Feather +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h index 735f6afc8..502c799db 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: SensorWatch + url: https://github.com/joeycastillo/Sensor-Watch +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c index 11977b036..cdc65baf1 100644 --- a/hw/bsp/saml2x/family.c +++ b/hw/bsp/saml2x/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Microchip +*/ + #include "sam.h" // Suppress warning caused by mcu driver diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h index f08762736..c7d809717 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32C071 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g071rb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32c0/family.c b/hw/bsp/stm32c0/family.c index dba6a8af1..ace3f2a71 100644 --- a/hw/bsp/stm32c0/family.c +++ b/hw/bsp/stm32c0/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32c0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h index 9af81e63c..82ad309a3 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F070 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f070rb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/hw/bsp/stm32f0/boards/stm32f072disco/board.h index 1febd01e8..3ca1b3641 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F072 Discovery + url: https://www.st.com/en/evaluation-tools/32f072bdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/hw/bsp/stm32f0/boards/stm32f072eval/board.h index 7dcfa3e85..2828000b9 100644 --- a/hw/bsp/stm32f0/boards/stm32f072eval/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F072 Eval + url: https://www.st.com/en/evaluation-tools/stm32072b-eval.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index 3079a1ed3..ea1373e6c 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h index 2f30a09d4..c8a74337f 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F103 Bluepill + url: https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h index c8dba4268..d4824686f 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F103 Mini v2 + url: https://stm32-base.org/boards/STM32F103RCT6-STM32-Mini-V2.0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h b/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h index d31102d32..1253c5a48 100644 --- a/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103ze_iar/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: IAR STM32 F103ze starter kit + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index 600fc28c0..29785397f 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f1xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h index 3301ede27..8d8c52f60 100644 --- a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h @@ -1,3 +1,9 @@ + +/* metadata: + name: STM32 F207 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f207zg.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c index 62cca327b..c1333382a 100644 --- a/hw/bsp/stm32f2/family.c +++ b/hw/bsp/stm32f2/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f2xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.h b/hw/bsp/stm32f3/boards/stm32f303disco/board.h index 706149b49..c79dea945 100644 --- a/hw/bsp/stm32f3/boards/stm32f303disco/board.h +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.h @@ -1,3 +1,9 @@ + +/* metadata: + name: STM32 F303 Discovery + url: https://www.st.com/en/evaluation-tools/stm32f3discovery.html +*/ + #ifndef BOARD_H #define BOARD_H diff --git a/hw/bsp/stm32f3/family.c b/hw/bsp/stm32f3/family.c index f94dd95cf..84612d416 100644 --- a/hw/bsp/stm32f3/family.c +++ b/hw/bsp/stm32f3/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f3xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index 670ce8012..11e976a42 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Adafruit Feather STM32F405 + url: https://www.adafruit.com/product/4382 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index 077313518..9583a924b 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Pyboard v1.1 + url: https://www.adafruit.com/product/2390 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index ef40089c9..8a3fe8409 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F401 Blackpill + url: https://stm32-base.org/boards/STM32F401CCU6-WeAct-Black-Pill-V1.2 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h index 6879d066b..effbf2be8 100644 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F407 Blackvet + url: https://stm32-base.org/boards/STM32F407VET6-STM32-F4VE-V2.0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index 380f8e391..19a029768 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F407 Discovery + url: https://www.st.com/en/evaluation-tools/stm32f4discovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index efa618b72..61e5de70d 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F411 Blackpill + url: https://stm32-base.org/boards/STM32F411CEU6-WeAct-Black-Pill-V2.0 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index d4bad8e40..d7b02e79d 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F411 Discovery + url: https://www.st.com/en/evaluation-tools/32f411ediscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index 74e664418..d5146ae3c 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F412 Discovery + url: https://www.st.com/en/evaluation-tools/32f412gdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h index 8900a1e6b..f7026ce61 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F412 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f412zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h index aa9de4073..9a348f33f 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F439 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f439zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 866a09d6f..3a1507dbf 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f4xx_hal.h" #include "bsp/board_api.h" diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h index 632fd99ed..06adb79ad 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Stlink-v3 mini + url: https://www.st.com/en/development-tools/stlink-v3mini.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index d45ceec5c..35102c1f2 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F723 Discovery + url: https://www.st.com/en/evaluation-tools/32f723ediscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index d8e92931e..2964ebada 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F746 Discovery + url: https://www.st.com/en/evaluation-tools/32f746gdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h index 55e77fe5f..b039f5543 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F746 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f746zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h index 81cb60aeb..b5b3841f1 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F767 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-f767zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/hw/bsp/stm32f7/boards/stm32f769disco/board.h index 268919b61..8ac520619 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 F769 Discovery + url: https://www.st.com/en/evaluation-tools/32f769idiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 527fbfe5c..5f63834d0 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -26,6 +26,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32f7xx_hal.h" #include "bsp/board_api.h" diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h index 9ebaf73f0..14d309da1 100644 --- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h +++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 G0B1 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g0b1re.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g0/family.c b/hw/bsp/stm32g0/family.c index d1635be12..86f2af12e 100644 --- a/hw/bsp/stm32g0/family.c +++ b/hw/bsp/stm32g0/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32g0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h index e61b13170..d569783fc 100644 --- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h +++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 B-G474E-DPOW1 Discovery kit + url: https://www.st.com/en/evaluation-tools/b-g474e-dpow1.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h index aa2bf20bb..cfef1c09f 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 G474 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g474re.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h index 7dd4ed9ae..be3d44645 100644 --- a/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h +++ b/hw/bsp/stm32g4/boards/stm32g491nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 G491 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-g491re.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index 2259cb9e2..d0ef7e503 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32g4xx_hal.h" #include "stm32g4xx_ll_bus.h" diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h index da20cfa3a..c8b5e31f5 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H503 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h503rb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h index c4e0f680b..adc3d751a 100644 --- a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H563 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h563zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h index 7baef6ca6..d75114397 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H573i Discovery + url: https://www.st.com/en/evaluation-tools/stm32h573i-dk.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c index 02500db4e..efc5bb7b1 100644 --- a/hw/bsp/stm32h5/family.c +++ b/hw/bsp/stm32h5/family.c @@ -25,6 +25,9 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ // Suppress warning caused by mcu driver #ifdef __GNUC__ diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.h b/hw/bsp/stm32h7/boards/daisyseed/board.h index 2d681d640..300ecb8b2 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.h +++ b/hw/bsp/stm32h7/boards/daisyseed/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Daisy Seed + url: https://electro-smith.com/products/daisy-seed +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h index c5257901d..f623149bd 100644 --- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H723 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h723zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index fa9721be3..821c799d7 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -24,10 +24,14 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H743 Eval + url: https://www.st.com/en/evaluation-tools/stm32h743i-eval.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ -#ifdef __cplusplus extern "C" { #endif diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h index 0606f395a..0277d05c7 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H743 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h743zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/hw/bsp/stm32h7/boards/stm32h745disco/board.h index b9d9cdea4..ebdd5a17a 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.h +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H745 Discovery + url: https://www.st.com/en/evaluation-tools/stm32h745i-disco.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h index f1c363082..e11a55103 100644 --- a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H750 WeAct + url: https://www.adafruit.com/product/5032 +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h index 2895f0973..ac417601b 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.h +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 H750b Discovery Kit + url: https://www.st.com/en/evaluation-tools/stm32h750b-dk.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h index 625c6a137..bfaf42784 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.h @@ -26,6 +26,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: Waveshare Open H743i + url: https://www.waveshare.com/openh743i-c-standard.htm +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 0be18350c..e5228b29b 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -27,6 +27,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32h7xx_hal.h" #include "bsp/board_api.h" diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h index ee83bbcbc..50bbafadb 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L052 DAP + url: n/a +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l0/boards/stm32l0538disco/board.h b/hw/bsp/stm32l0/boards/stm32l0538disco/board.h index 5cda1c15a..29402f00a 100644 --- a/hw/bsp/stm32l0/boards/stm32l0538disco/board.h +++ b/hw/bsp/stm32l0/boards/stm32l0538disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L0538 Discovery + url: https://www.st.com/en/evaluation-tools/32l0538discovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index c8c88d687..b28903e00 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32l0xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h index 72d17b760..980e1e321 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L412 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-l412kb.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.h b/hw/bsp/stm32l4/boards/stm32l476disco/board.h index 9d4351b39..8c766d8ea 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/board.h +++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L476 Disco + url: https://www.st.com/en/evaluation-tools/32l476gdiscovery.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h index 47ada6bb9..f522e7522 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L4P5 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h index 47ada6bb9..c181f5d4a 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 L4R5 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32l4/family.c b/hw/bsp/stm32l4/family.c index 965c4810a..2b555b5c2 100644 --- a/hw/bsp/stm32l4/family.c +++ b/hw/bsp/stm32l4/family.c @@ -26,6 +26,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32l4xx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h index 2f1c451db..cf3f63ea5 100644 --- a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h +++ b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 B-U585i IOT2A Discovery kit + url: https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h index 7f3bf462c..0c3439b2c 100644 --- a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U545 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-u545re-q.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.h b/hw/bsp/stm32u5/boards/stm32u575eval/board.h index bd91502af..b11f6a747 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h @@ -25,6 +25,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U575 Eval + url: https://www.st.com/en/evaluation-tools/stm32u575i-ev.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h index 6d244d418..be037b68a 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U575 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-u575zi-q.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h index 062fb807f..0785fb36b 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 U5a5 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-u5a5zj-q.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 3cc7cc511..032c01f34 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -25,6 +25,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + // Suppress warning caused by mcu driver #ifdef __GNUC__ #pragma GCC diagnostic push diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h index ea975df03..704592506 100644 --- a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: STM32 P-NUCLEO-WB55 + url: https://www.st.com/en/evaluation-tools/p-nucleo-wb55.html +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index 6051388a7..43e1345c8 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: STMicroelectronics +*/ + #include "stm32wbxx_hal.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h index 5732056ae..c0ceb4cd8 100644 --- a/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h +++ b/hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: TM4C123G LaunchPad + url: https://www.ti.com/tool/EK-TM4C123GXL +*/ + #ifndef _BOARD_H_ #define _BOARD_H_ diff --git a/hw/bsp/tm4c/family.c b/hw/bsp/tm4c/family.c index 5e1f6d3ff..4e5491005 100644 --- a/hw/bsp/tm4c/family.c +++ b/hw/bsp/tm4c/family.c @@ -1,3 +1,7 @@ +/* metadata: + manufacturer: Texas Instruments +*/ + #include "TM4C123.h" #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h index 2d4764f40..3d0e92b2c 100644 --- a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h +++ b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: XMC4500 relax kit + url: https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc45_relax_v1/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/xmc4000/boards/xmc4700_relax/board.h b/hw/bsp/xmc4000/boards/xmc4700_relax/board.h index aa12fde3b..f3972980c 100644 --- a/hw/bsp/xmc4000/boards/xmc4700_relax/board.h +++ b/hw/bsp/xmc4000/boards/xmc4700_relax/board.h @@ -24,6 +24,11 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + name: XMC4700 relax kit + url: https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_v1/ +*/ + #ifndef BOARD_H_ #define BOARD_H_ diff --git a/hw/bsp/xmc4000/family.c b/hw/bsp/xmc4000/family.c index c776cb58a..1acce024b 100644 --- a/hw/bsp/xmc4000/family.c +++ b/hw/bsp/xmc4000/family.c @@ -24,6 +24,10 @@ * This file is part of the TinyUSB stack. */ +/* metadata: + manufacturer: Infineon +*/ + #include "xmc_gpio.h" #include "xmc_scu.h" #include "xmc_uart.h" diff --git a/tools/gen_doc.py b/tools/gen_doc.py index c69f3ff29..318ff8089 100755 --- a/tools/gen_doc.py +++ b/tools/gen_doc.py @@ -1,4 +1,5 @@ #!/usr/bin/env python3 +import re import pandas as pd from tabulate import tabulate from pathlib import Path @@ -11,7 +12,6 @@ TOP = Path(__file__).parent.parent.resolve() # ----------------------------------------- # Dependencies # ----------------------------------------- - def gen_deps_doc(): deps_rst = Path(TOP) / "docs/reference/dependencies.rst" df = pd.DataFrame.from_dict(deps_all, orient='index', columns=['Repo', 'Commit', 'Required by']) @@ -32,5 +32,81 @@ MCU low-level peripheral driver and external libraries for building TinyUSB exam f.write(outstr) +# ----------------------------------------- +# Dependencies +# ----------------------------------------- +def extract_metadata(file_path): + metadata = {} + try: + with open(file_path, 'r') as file: + content = file.read() + # Match metadata block + match = re.search(r'/\*\s*metadata:(.*?)\*/', content, re.DOTALL) + if match: + block = match.group(1) + # Extract key-value pairs + for line in block.splitlines(): + key_value = re.match(r'\s*(\w+):\s*(.+)', line) + if key_value: + key, value = key_value.groups() + metadata[key] = value.strip() + except FileNotFoundError: + pass + return metadata + + +def gen_boards_doc(): + # 'Manufacturer' : { 'Board' } + vendor_data = {} + # 'Board' : [ 'Name', 'Family', 'url', 'note' ] + all_boards = {} + # extract metadata from family.c + for family_dir in sorted((Path(TOP) / "hw/bsp").iterdir()): + if family_dir.is_dir(): + family_c = family_dir / "family.c" + if not family_c.exists(): + family_c = family_dir / "boards/family.c" + f_meta = extract_metadata(family_c) + if not f_meta: + continue + manuf = f_meta.get('manufacturer', '') + if manuf not in vendor_data: + vendor_data[manuf] = {} + # extract metadata from board.h + for board_dir in sorted((family_dir / "boards").iterdir()): + if board_dir.is_dir(): + b_meta = extract_metadata(board_dir / "board.h") + if not b_meta: + continue + b_entry = [ + b_meta.get('name', ''), + family_dir.name, + b_meta.get('url', ''), + b_meta.get('note', '') + ] + vendor_data[manuf][board_dir.name] = b_entry + boards_rst = Path(TOP) / "docs/reference/boards.rst" + with boards_rst.open('w') as f: + title = f"""\ +**************** +Supported Boards +**************** + +Following boards are supported and can be used to run stock examples + +""" + f.write(title) + for manuf, boards in sorted(vendor_data.items()): + f.write(f"\n\n{manuf}\n") + f.write(f"{'=' * len(manuf)}\n\n") + df = pd.DataFrame.from_dict(boards, orient='index', columns=['Name', 'Family', 'URL', 'Note']) + df = df.rename_axis("Board") + f.write(tabulate(df, headers="keys", tablefmt='rst')) + + +# ----------------------------------------- +# Main +# ----------------------------------------- if __name__ == "__main__": gen_deps_doc() + gen_boards_doc() -- cgit v1.3.1 From 6080f89f3daae50344e21accf972061240f55ccd Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 22 Jan 2025 22:31:08 +0700 Subject: - change to use CMAKE_SYSTEM_CPU to prevent CMAKE_SYSTEM_PROCESSOR conflict with zephyr - change tinyusb CMakeLists.txt to function tinyusb_target_add() instead of defining tinyusb lib target --- examples/build_system/cmake/toolchain/common.cmake | 3 +- .../boards/raspberrypi_zero/board.cmake | 2 +- .../boards/raspberrypi_cm4/board.cmake | 2 +- .../boards/raspberrypi_zero2/board.cmake | 2 +- hw/bsp/ch32v10x/family.cmake | 2 +- hw/bsp/ch32v20x/family.cmake | 2 +- hw/bsp/ch32v307/family.cmake | 2 +- hw/bsp/da1469x/family.cmake | 2 +- hw/bsp/f1c100s/family.cmake | 2 +- hw/bsp/family_support.cmake | 138 +++++++++------------ hw/bsp/fomu/family.cmake | 2 +- hw/bsp/gd32vf103/family.cmake | 2 +- hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake | 2 +- hw/bsp/imxrt/family.cmake | 4 +- hw/bsp/kinetis_k/family.cmake | 2 +- hw/bsp/kinetis_k32l2/family.cmake | 2 +- hw/bsp/kinetis_kl/family.cmake | 2 +- hw/bsp/lpc11/family.cmake | 2 +- hw/bsp/lpc13/family.cmake | 2 +- hw/bsp/lpc15/family.cmake | 2 +- hw/bsp/lpc17/family.cmake | 2 +- hw/bsp/lpc18/family.cmake | 2 +- hw/bsp/lpc40/family.cmake | 2 +- hw/bsp/lpc43/family.cmake | 2 +- hw/bsp/lpc51/family.cmake | 2 +- hw/bsp/lpc54/family.cmake | 2 +- hw/bsp/lpc55/family.cmake | 2 +- hw/bsp/max32650/family.cmake | 2 +- hw/bsp/max32666/family.cmake | 2 +- hw/bsp/max32690/family.cmake | 2 +- hw/bsp/max78002/family.cmake | 2 +- hw/bsp/mcx/family.cmake | 4 +- hw/bsp/mm32/family.cmake | 2 +- hw/bsp/msp430/family.cmake | 2 +- hw/bsp/msp432e4/family.cmake | 2 +- hw/bsp/nrf/family.cmake | 26 ++-- hw/bsp/ra/boards/portenta_c33/board.cmake | 2 +- hw/bsp/ra/boards/ra2a1_ek/board.cmake | 2 +- hw/bsp/ra/boards/ra4m1_ek/board.cmake | 2 +- hw/bsp/ra/boards/ra4m3_ek/board.cmake | 2 +- hw/bsp/ra/boards/ra6m1_ek/board.cmake | 2 +- hw/bsp/ra/boards/ra6m5_ek/board.cmake | 2 +- hw/bsp/ra/boards/ra8m1_ek/board.cmake | 2 +- hw/bsp/ra/boards/uno_r4/board.cmake | 2 +- hw/bsp/samd11/family.cmake | 2 +- hw/bsp/samd21/family.cmake | 9 +- hw/bsp/samd5x_e5x/family.cmake | 9 +- hw/bsp/samg/family.cmake | 2 +- hw/bsp/saml2x/family.cmake | 2 +- hw/bsp/stm32c0/family.cmake | 2 +- hw/bsp/stm32f0/family.cmake | 2 +- hw/bsp/stm32f1/family.cmake | 2 +- hw/bsp/stm32f2/family.cmake | 2 +- hw/bsp/stm32f3/family.cmake | 2 +- hw/bsp/stm32f4/family.cmake | 2 +- hw/bsp/stm32f7/family.cmake | 2 +- hw/bsp/stm32g0/family.cmake | 2 +- hw/bsp/stm32g4/family.cmake | 2 +- hw/bsp/stm32h5/family.cmake | 2 +- hw/bsp/stm32h7/family.cmake | 2 +- hw/bsp/stm32l0/family.cmake | 2 +- hw/bsp/stm32l4/family.cmake | 2 +- hw/bsp/stm32u5/family.cmake | 2 +- hw/bsp/stm32wb/family.cmake | 2 +- hw/bsp/tm4c/family.cmake | 2 +- hw/bsp/xmc4000/family.cmake | 2 +- src/CMakeLists.txt | 93 +++++--------- 67 files changed, 168 insertions(+), 236 deletions(-) (limited to 'hw/bsp/ra') diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index ce97664d5..4c181137b 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -4,6 +4,7 @@ include(CMakePrintHelpers) # Common # ---------------------------------------------------------------------------- set(CMAKE_SYSTEM_NAME Generic) +set(CMAKE_SYSTEM_PROCESSOR ${CMAKE_SYSTEM_CPU}) set_property(GLOBAL PROPERTY TARGET_SUPPORTS_SHARED_LIBS FALSE) # Look for includes and libraries only in the target system prefix. @@ -13,7 +14,7 @@ set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY) set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER) # pass TOOLCHAIN_CPU to -set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_CPU) +set(CMAKE_TRY_COMPILE_PLATFORM_VARIABLES CMAKE_SYSTEM_PROCESSOR CMAKE_SYSTEM_CPU) include(${CMAKE_CURRENT_LIST_DIR}/../cpu/${CMAKE_SYSTEM_CPU}.cmake) # ---------------------------------------------------------------------------- diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake index 2b8cc19e0..616a83fe2 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR arm1176jzf-s CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU arm1176jzf-s CACHE INTERNAL "System Processor") #set(SUFFIX "") function(update_board TARGET) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake index 919068f1d..6f1fc0225 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-a72 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-a72 CACHE INTERNAL "System Processor") set(BCM_VERSION 2711) function(update_board TARGET) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake index 85f84e947..80747363a 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-a53 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-a53 CACHE INTERNAL "System Processor") set(BCM_VERSION 2837) function(update_board TARGET) diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index c0af0ef44..92acaed80 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -9,7 +9,7 @@ set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) set(FAMILY_MCUS CH32V103 CACHE INTERNAL "") diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 380ef190d..d4f25f25f 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -9,7 +9,7 @@ set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) set(FAMILY_MCUS CH32V20X CACHE INTERNAL "") diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index d603af62d..0fd78fa03 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -8,7 +8,7 @@ set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index 8c89141fe..ca6b57635 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -5,7 +5,7 @@ set(MCU_DIR ${TOP}/hw/mcu/dialog/da1469x) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) -set(CMAKE_SYSTEM_PROCESSOR cortex-m33-nodsp CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m33-nodsp CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS DA1469X CACHE INTERNAL "") diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake index 032dfb77d..013e61dde 100644 --- a/hw/bsp/f1c100s/family.cmake +++ b/hw/bsp/f1c100s/family.cmake @@ -5,7 +5,7 @@ set(SDK_DIR ${TOP}/hw/mcu/allwinner/f1c100s) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR arm926ej-s CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU arm926ej-s CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS F1C100S CACHE INTERNAL "") diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 3820bb51a..15baf0294 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -73,34 +73,6 @@ if (NOT NO_WARN_RWX_SEGMENTS_SUPPORTED) set(NO_WARN_RWX_SEGMENTS_SUPPORTED 1) endif() -#set(WARNING_FLAGS_GNU -# -Wall -# -Wextra -# -Werror -# -Wfatal-errors -# -Wdouble-promotion -# -Wstrict-prototypes -# -Wstrict-overflow -# -Werror-implicit-function-declaration -# -Wfloat-equal -# -Wundef -# -Wshadow -# -Wwrite-strings -# -Wsign-compare -# -Wmissing-format-attribute -# -Wunreachable-code -# -Wcast-align -# -Wcast-function-type -# -Wcast-qual -# -Wnull-dereference -# -Wuninitialized -# -Wunused -# -Wreturn-type -# -Wredundant-decls -# ) - -set(WARNING_FLAGS_IAR "") - #if (BUILD_ZEPHYR) # set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) # find_package(Zephyr REQUIRED HINTS ${TOP}/lib/zephyr) @@ -182,7 +154,6 @@ endfunction() # Add RTOS to example function(family_add_rtos TARGET RTOS) if (RTOS STREQUAL "freertos") - # freertos config if (NOT TARGET freertos_config) add_library(freertos_config INTERFACE) target_include_directories(freertos_config INTERFACE ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig) @@ -190,12 +161,16 @@ function(family_add_rtos TARGET RTOS) target_link_libraries(freertos_config INTERFACE board_${BOARD}) endif() - # freertos kernel if (NOT TARGET freertos_kernel) add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel) endif () target_link_libraries(${TARGET} PUBLIC freertos_kernel) + target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_FREERTOS) + elseif (RTOS STREQUAL "zephyr") + target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_ZEPHYR) + target_include_directories(${TARGET} PUBLIC ${ZEPHYR_BASE}/include) + target_link_libraries(${TARGET} PUBLIC zephyr_interface kernel) endif () endfunction() @@ -203,6 +178,7 @@ endfunction() function(family_configure_common TARGET RTOS) family_add_rtos(${TARGET} ${RTOS}) + # Add BOARD_${BOARD} define string(TOUPPER ${BOARD} BOARD_UPPER) string(REPLACE "-" "_" BOARD_UPPER ${BOARD_UPPER}) target_compile_definitions(${TARGET} PUBLIC @@ -215,20 +191,6 @@ function(family_configure_common TARGET RTOS) target_compile_options(${TARGET} PUBLIC ${CFLAGS_CLI}) endif() - target_compile_options(${TARGET} PUBLIC ${WARNING_FLAGS_${CMAKE_C_COMPILER_ID}}) - - # Generate linker map file - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") - if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 AND NO_WARN_RWX_SEGMENTS_SUPPORTED) -# target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") - endif () - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${TARGET} PUBLIC "LINKER:--map=$.map") - endif() - # ETM Trace option if (TRACE_ETM STREQUAL "1") target_compile_definitions(${TARGET} PUBLIC TRACE_ETM) @@ -248,6 +210,42 @@ function(family_configure_common TARGET RTOS) endif () endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_compile_options(${TARGET} PRIVATE + -Wall + -Wextra + #-Werror + -Wfatal-errors + -Wdouble-promotion + -Wstrict-prototypes + -Wstrict-overflow + -Werror-implicit-function-declaration + -Wfloat-equal + -Wundef + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-function-type + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wunused-function + -Wreturn-type + -Wredundant-decls + -Wmissing-prototypes + ) + target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 AND NO_WARN_RWX_SEGMENTS_SUPPORTED) + target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") + endif () + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${TARGET} PUBLIC "LINKER:--map=$.map") + endif () + # run size after build # find_program(SIZE_EXE ${CMAKE_SIZE}) # if(NOT ${SIZE_EXE} STREQUAL SIZE_EXE-NOTFOUND) @@ -257,54 +255,32 @@ function(family_configure_common TARGET RTOS) # endif () endfunction() -# Add tinyusb to example +# Add tinyusb to target with RTOS function(family_add_tinyusb TARGET OPT_MCU RTOS) - # tinyusb target is built for each example since it depends on example's tusb_config.h - set(TINYUSB_TARGET_PREFIX ${TARGET}-) - add_library(${TARGET}-tinyusb_config INTERFACE) + # tinyusb's CMakeList.txt + add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) + + # Add TinyUSB sources, include and common define + tinyusb_target_add(${TARGET}) # path to tusb_config.h - target_include_directories(${TARGET}-tinyusb_config INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}/src) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_MCU=${OPT_MCU}) + target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src) + target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_MCU=${OPT_MCU}) if (DEFINED LOG) - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_DEBUG=${LOG}) - if (LOG STREQUAL "4") - # no inline for debug level 4 - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE TU_ATTR_ALWAYS_INLINE=) + target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_DEBUG=${LOG}) + if (LOG STREQUAL "4") # no inline for debug level 4 + target_compile_definitions(${TARGET} PUBLIC TU_ATTR_ALWAYS_INLINE=) endif () endif() - if (RTOS STREQUAL "freertos") - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_OS=OPT_OS_FREERTOS) - elseif (RTOS STREQUAL "zephyr") - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_OS=OPT_OS_ZEPHYR) - endif () - - # tinyusb's CMakeList.txt - add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) - - if (RTOS STREQUAL "freertos") - # link tinyusb with freeRTOS kernel - target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel) - elseif (RTOS STREQUAL "zephyr") - target_include_directories(${TARGET}-tinyusb PUBLIC ${ZEPHYR_BASE}/include) - endif () - # use max3421 as host controller if (MAX3421_HOST STREQUAL "1") - target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUH_MAX3421=1) - target_sources(${TARGET}-tinyusb PUBLIC + target_compile_definitions(${TARGET} PUBLIC CFG_TUH_MAX3421=1) + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/analog/max3421/hcd_max3421.c ) endif () - - # compile define from command line - if(DEFINED CFLAGS_CLI) - separate_arguments(CFLAGS_CLI) - target_compile_options(${TARGET}-tinyusb PUBLIC ${CFLAGS_CLI}) - endif() - endfunction() # Add bin/hex output @@ -330,10 +306,10 @@ function(family_add_uf2 TARGET FAMILY_ID) VERBATIM) endfunction() -#---------------------------------- +#------------------------------------------------------- # Example Target Configure (Default rule) # These function can be redefined in FAMILY/family.cmake -#---------------------------------- +#-------------------------------------------------------- function(family_configure_example TARGET RTOS) # empty function, should be redefined in FAMILY/family.cmake diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index 8d5ab144c..132730086 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -4,7 +4,7 @@ include_guard() include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR rv32i-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU rv32i-ilp32 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) set(FAMILY_MCUS VALENTYUSB_EPTRI CACHE INTERNAL "") diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index 5ef551f25..273fea39f 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -7,7 +7,7 @@ set(SOC_DIR ${SDK_DIR}/SoC/gd32vf103) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU rv32imac-ilp32 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) set(FAMILY_MCUS GD32VF103 CACHE INTERNAL "") diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake index 46a97344f..d5629f8ba 100644 --- a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake +++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake @@ -4,7 +4,7 @@ if (M4 STREQUAL "1") set(MCU_CORE _cm4) set(JLINK_CORE _M4) set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx${MCU_CORE}_ram.ld) - set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") + set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") else () set(MCU_CORE _cm7) set(JLINK_CORE _M7) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 27a5f26aa..5a31e42a6 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -8,8 +8,8 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) set(MCU_VARIANT_WITH_CORE ${MCU_VARIANT}${MCU_CORE}) # toolchain set up -if (NOT DEFINED CMAKE_SYSTEM_PROCESSOR) - set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") +if (NOT DEFINED CMAKE_SYSTEM_CPU) + set(CMAKE_SYSTEM_CPU cortex-m7 CACHE INTERNAL "System Processor") endif () set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index c621de388..7fd3f6353 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS KINETIS_K CACHE INTERNAL "") diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index e0843b5a4..25710a4c2 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS KINETIS_K32L CACHE INTERNAL "") diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 21a264e53..d8d8d3631 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") diff --git a/hw/bsp/lpc11/family.cmake b/hw/bsp/lpc11/family.cmake index 13ed4c922..a3efecb99 100644 --- a/hw/bsp/lpc11/family.cmake +++ b/hw/bsp/lpc11/family.cmake @@ -11,7 +11,7 @@ else() endif() # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC11UXX CACHE INTERNAL "") diff --git a/hw/bsp/lpc13/family.cmake b/hw/bsp/lpc13/family.cmake index 4d0f0110f..d360048ed 100644 --- a/hw/bsp/lpc13/family.cmake +++ b/hw/bsp/lpc13/family.cmake @@ -8,7 +8,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC13XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake index c87001943..5ad12501a 100644 --- a/hw/bsp/lpc15/family.cmake +++ b/hw/bsp/lpc15/family.cmake @@ -8,7 +8,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC15XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 0f7485f0f..4f2aae19b 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC175X_6X CACHE INTERNAL "") diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index ed948c6e8..70dad48c3 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC18XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index f1e8fa50d..0bcdc6037 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC40XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 73842c7e7..9ed937c24 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC43XX CACHE INTERNAL "") diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index bd72c6067..94d6b0bf0 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC51 CACHE INTERNAL "") diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index 0e4994ab1..eb76de6b6 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC54 CACHE INTERNAL "") diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 367cb3bbd..6a06846c4 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS LPC55 CACHE INTERNAL "") diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake index 3545e1c3a..0978bf0dc 100644 --- a/hw/bsp/max32650/family.cmake +++ b/hw/bsp/max32650/family.cmake @@ -11,7 +11,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) set(LD_FILE_Clang ${LD_FILE_GNU}) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(JLINK_DEVICE max32650) set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32650.cfg") diff --git a/hw/bsp/max32666/family.cmake b/hw/bsp/max32666/family.cmake index b921b71ce..0ef9bcdcc 100644 --- a/hw/bsp/max32666/family.cmake +++ b/hw/bsp/max32666/family.cmake @@ -12,7 +12,7 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32666.ld) set(LD_FILE_Clang ${LD_FILE_GNU}) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(JLINK_DEVICE max32666) set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32665.cfg") diff --git a/hw/bsp/max32690/family.cmake b/hw/bsp/max32690/family.cmake index 9ce8892f1..d5d1bb3ba 100644 --- a/hw/bsp/max32690/family.cmake +++ b/hw/bsp/max32690/family.cmake @@ -12,7 +12,7 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32690.ld) set(LD_FILE_Clang ${LD_FILE_GNU}) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(JLINK_DEVICE max32690) set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32690.cfg") diff --git a/hw/bsp/max78002/family.cmake b/hw/bsp/max78002/family.cmake index 4c9bf806b..b836408fc 100644 --- a/hw/bsp/max78002/family.cmake +++ b/hw/bsp/max78002/family.cmake @@ -12,7 +12,7 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max78002.ld) set(LD_FILE_Clang ${LD_FILE_GNU}) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(JLINK_DEVICE max78000) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index b1d2a18ec..0a7501ca3 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -8,10 +8,10 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up if (MCU_VARIANT STREQUAL "MCXA153") - set(CMAKE_SYSTEM_PROCESSOR cortex-m33-nodsp-nofp CACHE INTERNAL "System Processor") + set(CMAKE_SYSTEM_CPU cortex-m33-nodsp-nofp CACHE INTERNAL "System Processor") set(FAMILY_MCUS MCXA15 CACHE INTERNAL "") elseif (MCU_VARIANT STREQUAL "MCXN947") - set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") + set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(FAMILY_MCUS MCXN9 CACHE INTERNAL "") else() message(FATAL_ERROR "MCU_VARIANT not supported") diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index 93f297b8e..e0fb0ca93 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -7,7 +7,7 @@ set(SDK_DIR ${TOP}/hw/mcu/mindmotion/mm32sdk/${MCU_VARIANT_UPPER}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MM32F327X CACHE INTERNAL "") diff --git a/hw/bsp/msp430/family.cmake b/hw/bsp/msp430/family.cmake index e0b4ed28a..64bcb3fd2 100644 --- a/hw/bsp/msp430/family.cmake +++ b/hw/bsp/msp430/family.cmake @@ -6,7 +6,7 @@ set(SDK_DIR ${TOP}/hw/mcu/ti/msp430/msp430-gcc-support-files/include) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR msp430 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU msp430 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/msp430_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MSP430x5xx CACHE INTERNAL "") diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index f06e0d4c9..6a6650e28 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS MSP432E4 CACHE INTERNAL "") diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 0dfc7579c..30561cdf5 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -111,14 +111,10 @@ endfunction() function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) + # Board target + add_board_target(board_${BOARD}) - if (BUILD_ZEPHYR) - #target_link_libraries(board_${BOARD} PUBLIC zephyr_interface kernel) - elseif () - # Board target - add_board_target(board_${BOARD}) - endif () + family_configure_common(${TARGET} ${RTOS}) #---------- Port Specific ---------- # These files are built for each example since it depends on example's tusb_config.h @@ -136,20 +132,18 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS}) - target_sources(${TARGET}-tinyusb PRIVATE + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c ) - if (BUILD_ZEPHYR) - target_link_libraries(${TARGET}-tinyusb PUBLIC zephyr_interface kernel) - target_link_libraries(${TARGET} PUBLIC ${TARGET}-tinyusb) - elseif () - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) - endif () +# if (BUILD_ZEPHYR) +# target_link_libraries(${TARGET} PUBLIC zephyr_interface kernel) +# elseif () + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) +# endif () # Flashing - #family_add_bin_hex(${TARGET}) +# family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) # family_flash_adafruit_nrfutil(${TARGET}) endfunction() diff --git a/hw/bsp/ra/boards/portenta_c33/board.cmake b/hw/bsp/ra/boards/portenta_c33/board.cmake index 520686daa..a1545f070 100644 --- a/hw/bsp/ra/boards/portenta_c33/board.cmake +++ b/hw/bsp/ra/boards/portenta_c33/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.cmake b/hw/bsp/ra/boards/ra2a1_ek/board.cmake index 4d083ca98..9c679c4b5 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/board.cmake +++ b/hw/bsp/ra/boards/ra2a1_ek/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m23 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m23 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra2a1) set(JLINK_DEVICE R7FA2A1AB) diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.cmake b/hw/bsp/ra/boards/ra4m1_ek/board.cmake index 7bb48bf44..247dea619 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/board.cmake +++ b/hw/bsp/ra/boards/ra4m1_ek/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra4m1) set(JLINK_DEVICE R7FA4M1AB) diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.cmake b/hw/bsp/ra/boards/ra4m3_ek/board.cmake index dfd5fc95a..b413abc36 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.cmake +++ b/hw/bsp/ra/boards/ra4m3_ek/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra4m3) set(JLINK_DEVICE R7FA4M3AF) diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.cmake b/hw/bsp/ra/boards/ra6m1_ek/board.cmake index b2f41a354..957e8394d 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m1_ek/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra6m1) set(JLINK_DEVICE R7FA6M1AD) diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index 568d5d78f..bc99845a1 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) diff --git a/hw/bsp/ra/boards/ra8m1_ek/board.cmake b/hw/bsp/ra/boards/ra8m1_ek/board.cmake index 9c797c3b7..c61166f38 100644 --- a/hw/bsp/ra/boards/ra8m1_ek/board.cmake +++ b/hw/bsp/ra/boards/ra8m1_ek/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m85 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m85 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra8m1) set(JLINK_DEVICE R7FA8M1AH) diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake index 3aa6045be..735a93035 100644 --- a/hw/bsp/ra/boards/uno_r4/board.cmake +++ b/hw/bsp/ra/boards/uno_r4/board.cmake @@ -1,4 +1,4 @@ -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(MCU_VARIANT ra4m1) set(JLINK_DEVICE R7FA4M1AB) diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index c9ccc86f8..c794d8f37 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -7,7 +7,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMD11 CACHE INTERNAL "") diff --git a/hw/bsp/samd21/family.cmake b/hw/bsp/samd21/family.cmake index c836b85d9..b946dc4c0 100644 --- a/hw/bsp/samd21/family.cmake +++ b/hw/bsp/samd21/family.cmake @@ -6,7 +6,7 @@ set(SDK_DIR ${TOP}/hw/mcu/microchip/samd21) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMD21 CACHE INTERNAL "") @@ -97,13 +97,10 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAMD21 ${RTOS}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/samd5x_e5x/family.cmake b/hw/bsp/samd5x_e5x/family.cmake index fd95ce10e..1153a5fbd 100644 --- a/hw/bsp/samd5x_e5x/family.cmake +++ b/hw/bsp/samd5x_e5x/family.cmake @@ -6,7 +6,7 @@ set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMD51 SAME54 CACHE INTERNAL "") @@ -94,13 +94,10 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAMD51 ${RTOS}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake index 1cc715ce6..4a1cbd730 100644 --- a/hw/bsp/samg/family.cmake +++ b/hw/bsp/samg/family.cmake @@ -7,7 +7,7 @@ set(SDK_DIR ${TOP}/hw/mcu/microchip/samg55) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAMG CACHE INTERNAL "") diff --git a/hw/bsp/saml2x/family.cmake b/hw/bsp/saml2x/family.cmake index 2338d1916..bf6b0e251 100644 --- a/hw/bsp/saml2x/family.cmake +++ b/hw/bsp/saml2x/family.cmake @@ -7,7 +7,7 @@ set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS SAML21 SAML22 CACHE INTERNAL "") diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index 7c5328ab0..dd0fd4074 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32C0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index 8b70411e8..7187d0573 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 31801c035..09a93e483 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F1 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index 2bae07b99..7f9839442 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F2 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 6f4e866f8..50fede817 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m3 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F3 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index 487f0cf06..10b98b7a6 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index df1d2a3cf..f7001a2ed 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m7-fpsp CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m7-fpsp CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F7 CACHE INTERNAL "") diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 7129cebd8..7ac19693c 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 6c4e90d40..e0fca4b30 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 804b13768..a2e4c6e8e 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32H5 CACHE INTERNAL "") diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index 6af79736d..65f6884da 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -12,7 +12,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m7 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index a2324f123..5f29d254d 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m0plus CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32L0 CACHE INTERNAL "") diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 67c5be7d8..6a967de6f 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32L4 CACHE INTERNAL "") diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 3be6702fd..0a2ad568d 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m33 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32U5 CACHE INTERNAL "") diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index 4f958045d..868b58f71 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -11,7 +11,7 @@ set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32WB CACHE INTERNAL "") diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 9c083759b..110bd9f10 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -9,7 +9,7 @@ set(SDK_DIR ${TOP}/hw/mcu/ti/${MCU_VARIANT}xx) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS TM4C123 CACHE INTERNAL "") diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index e73f0f216..6266f8f94 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -6,7 +6,7 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) # toolchain set up -set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS XMC4000 CACHE INTERNAL "") diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 1d2f37b2d..bf926fd09 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -1,11 +1,10 @@ # TODO more docs and example on how to use this file -# Usage: requires target tinyusb_config which expose tusb_config.h file # TINYUSB_TARGET_PREFIX and TINYUSB_TARGET_SUFFIX can be used to change the name of the target cmake_minimum_required(VERSION 3.20) -# Add tinyusb to a target, if user don't want to compile tinyusb as a library -function(add_tinyusb TARGET) +# Add tinyusb to a existing target +function(tinyusb_target_add TARGET) target_sources(${TARGET} PRIVATE # common ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tusb.c @@ -40,68 +39,36 @@ function(add_tinyusb TARGET) # TODO for net driver, should be removed/changed ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../lib/networking ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_compile_options(${TARGET} PRIVATE - -Wall - -Wextra - #-Werror - -Wfatal-errors - -Wdouble-promotion - -Wstrict-prototypes - -Wstrict-overflow - -Werror-implicit-function-declaration - -Wfloat-equal - -Wundef - -Wshadow - -Wwrite-strings - -Wsign-compare - -Wmissing-format-attribute - -Wunreachable-code - -Wcast-align - -Wcast-function-type - -Wcast-qual - -Wnull-dereference - -Wuninitialized - -Wunused - -Wunused-function - -Wreturn-type - -Wredundant-decls - -Wmissing-prototypes - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - - endif () endfunction() #------------------------------------ # TinyUSB as library target #------------------------------------ -if (NOT DEFINED TINYUSB_TARGET) - set(TINYUSB_TARGET "tinyusb") -endif () - -set(TINYUSB_CONFIG_TARGET "${TINYUSB_TARGET}_config") - -if (DEFINED TINYUSB_TARGET_PREFIX) - set(TINYUSB_TARGET "${TINYUSB_TARGET_PREFIX}${TINYUSB_TARGET}") - set(TINYUSB_CONFIG_TARGET "${TINYUSB_TARGET_PREFIX}${TINYUSB_CONFIG_TARGET}") -endif () - -if (DEFINED TINYUSB_TARGET_SUFFIX) - set(TINYUSB_TARGET "${TINYUSB_TARGET}${TINYUSB_TARGET_SUFFIX}") - set(TINYUSB_CONFIG_TARGET "${TINYUSB_CONFIG_TARGET}${TINYUSB_TARGET_SUFFIX}") -endif () - -add_library(${TINYUSB_TARGET} STATIC) -add_tinyusb(${TINYUSB_TARGET}) - -# Check if tinyusb_config target is defined -if (NOT TARGET ${TINYUSB_CONFIG_TARGET}) - message(FATAL_ERROR "${TINYUSB_CONFIG_TARGET} target is not defined") -endif() - -# Link with tinyusb_config target -target_link_libraries(${TINYUSB_TARGET} PUBLIC - ${TINYUSB_CONFIG_TARGET} - ) +#if (NOT DEFINED TINYUSB_TARGET) +# set(TINYUSB_TARGET "tinyusb") +#endif () +# +#set(TINYUSB_CONFIG_TARGET "${TINYUSB_TARGET}_config") +# +#if (DEFINED TINYUSB_TARGET_PREFIX) +# set(TINYUSB_TARGET "${TINYUSB_TARGET_PREFIX}${TINYUSB_TARGET}") +# set(TINYUSB_CONFIG_TARGET "${TINYUSB_TARGET_PREFIX}${TINYUSB_CONFIG_TARGET}") +#endif () +# +#if (DEFINED TINYUSB_TARGET_SUFFIX) +# set(TINYUSB_TARGET "${TINYUSB_TARGET}${TINYUSB_TARGET_SUFFIX}") +# set(TINYUSB_CONFIG_TARGET "${TINYUSB_CONFIG_TARGET}${TINYUSB_TARGET_SUFFIX}") +#endif () +# +#add_library(${TINYUSB_TARGET} STATIC) +#tinyusb_target_add(${TINYUSB_TARGET}) +# +## Check if tinyusb_config target is defined +#if (NOT TARGET ${TINYUSB_CONFIG_TARGET}) +# message(FATAL_ERROR "${TINYUSB_CONFIG_TARGET} target is not defined") +#endif() +# +## Link with tinyusb_config target +#target_link_libraries(${TINYUSB_TARGET} PUBLIC +# ${TINYUSB_CONFIG_TARGET} +# ) -- cgit v1.3.1 From b53801a8acc710e969b50849747585903b5b3025 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Jan 2025 15:06:05 +0700 Subject: add cmake RTOS=zephyr (default noos) for zephyr build --- .../build_system/cmake/toolchain/arm_gcc.cmake | 36 ++++++++++++---------- examples/build_system/cmake/toolchain/common.cmake | 4 --- examples/device/board_test/CMakeLists.txt | 13 ++------ examples/device/cdc_msc/CMakeLists.txt | 8 ++--- examples/device/msc_dual_lun/CMakeLists.txt | 8 ++--- hw/bsp/broadcom_32bit/family.cmake | 2 +- hw/bsp/broadcom_64bit/family.cmake | 2 +- hw/bsp/ch32v10x/family.cmake | 2 +- hw/bsp/ch32v20x/family.cmake | 2 +- hw/bsp/ch32v307/family.cmake | 2 +- hw/bsp/da1469x/family.cmake | 2 +- hw/bsp/f1c100s/family.cmake | 2 +- hw/bsp/family_support.cmake | 19 +++++++----- hw/bsp/fomu/family.cmake | 2 +- hw/bsp/gd32vf103/family.cmake | 2 +- hw/bsp/imxrt/family.cmake | 2 +- hw/bsp/kinetis_k/family.cmake | 2 +- hw/bsp/kinetis_k32l2/family.cmake | 2 +- hw/bsp/kinetis_kl/family.cmake | 2 +- hw/bsp/lpc11/family.cmake | 2 +- hw/bsp/lpc13/family.cmake | 2 +- hw/bsp/lpc15/family.cmake | 2 +- hw/bsp/lpc17/family.cmake | 2 +- hw/bsp/lpc18/family.cmake | 2 +- hw/bsp/lpc40/family.cmake | 2 +- hw/bsp/lpc43/family.cmake | 2 +- hw/bsp/lpc51/family.cmake | 2 +- hw/bsp/lpc54/family.cmake | 2 +- hw/bsp/lpc55/family.cmake | 2 +- hw/bsp/max32650/family.cmake | 2 +- hw/bsp/max32666/family.cmake | 2 +- hw/bsp/max32690/family.cmake | 2 +- hw/bsp/max78002/family.cmake | 2 +- hw/bsp/mcx/family.cmake | 4 +-- hw/bsp/mm32/family.cmake | 2 +- hw/bsp/msp430/family.cmake | 2 +- hw/bsp/msp432e4/family.cmake | 2 +- hw/bsp/nrf/family.cmake | 10 ++---- hw/bsp/ra/family.cmake | 2 +- hw/bsp/samd11/family.cmake | 2 +- hw/bsp/samd21/family.cmake | 2 +- hw/bsp/samd5x_e5x/family.cmake | 2 +- hw/bsp/samg/family.cmake | 2 +- hw/bsp/saml2x/family.cmake | 2 +- hw/bsp/stm32c0/family.cmake | 2 +- hw/bsp/stm32f0/family.cmake | 2 +- hw/bsp/stm32f1/family.cmake | 2 +- hw/bsp/stm32f2/family.cmake | 2 +- hw/bsp/stm32f3/family.cmake | 2 +- hw/bsp/stm32f4/family.cmake | 2 +- hw/bsp/stm32f7/family.cmake | 2 +- hw/bsp/stm32g0/family.cmake | 2 +- hw/bsp/stm32g4/family.cmake | 2 +- hw/bsp/stm32h5/family.cmake | 2 +- hw/bsp/stm32h7/family.cmake | 2 +- hw/bsp/stm32l0/family.cmake | 2 +- hw/bsp/stm32l4/family.cmake | 2 +- hw/bsp/stm32u5/family.cmake | 2 +- hw/bsp/stm32wb/family.cmake | 2 +- hw/bsp/tm4c/family.cmake | 2 +- hw/bsp/xmc4000/family.cmake | 2 +- 61 files changed, 96 insertions(+), 112 deletions(-) (limited to 'hw/bsp/ra') diff --git a/examples/build_system/cmake/toolchain/arm_gcc.cmake b/examples/build_system/cmake/toolchain/arm_gcc.cmake index 0b0949dd8..4cef07ff5 100644 --- a/examples/build_system/cmake/toolchain/arm_gcc.cmake +++ b/examples/build_system/cmake/toolchain/arm_gcc.cmake @@ -1,21 +1,25 @@ -if (NOT DEFINED CMAKE_C_COMPILER) - set(CMAKE_C_COMPILER "arm-none-eabi-gcc") -endif () +if (RTOS STREQUAL zephyr) -if (NOT DEFINED CMAKE_CXX_COMPILER) - set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") -endif () +else () + if (NOT DEFINED CMAKE_C_COMPILER) + set(CMAKE_C_COMPILER "arm-none-eabi-gcc") + endif () + + if (NOT DEFINED CMAKE_CXX_COMPILER) + set(CMAKE_CXX_COMPILER "arm-none-eabi-g++") + endif () -set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -find_program(CMAKE_SIZE arm-none-eabi-size) -find_program(CMAKE_OBJCOPY arm-none-eabi-objcopy) -find_program(CMAKE_OBJDUMP arm-none-eabi-objdump) + set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) + find_program(CMAKE_SIZE arm-none-eabi-size) + find_program(CMAKE_OBJCOPY arm-none-eabi-objcopy) + find_program(CMAKE_OBJDUMP arm-none-eabi-objdump) -include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) + include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) -get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) -if (IS_IN_TRY_COMPILE) - set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") - set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") - cmake_print_variables(CMAKE_C_LINK_FLAGS) + get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) + if (IS_IN_TRY_COMPILE) + set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") + set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") + cmake_print_variables(CMAKE_C_LINK_FLAGS) + endif () endif () diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index 7fe0aac4b..4c181137b 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -1,7 +1,3 @@ -if (BUILD_ZEPHYR) - return() -endif() - include(CMakePrintHelpers) # ---------------------------------------------------------------------------- diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index adcc3ba3d..9a604a732 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -5,11 +5,6 @@ include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) # gets PROJECT name for the example (e.g. -) family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) -if (BUILD_ZEPHYR) - set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) - find_package(Zephyr REQUIRED HINTS ${TOP}/lib/zephyr) -endif () - project(${PROJECT} C CXX ASM) # Checks this example is valid for the family and initializes the project @@ -20,7 +15,7 @@ if(FAMILY STREQUAL "espressif") return() endif() -if (BUILD_ZEPHYR) +if (RTOS STREQUAL zephyr) set(EXE_NAME app) else() set(EXE_NAME ${PROJECT}) @@ -39,8 +34,4 @@ target_include_directories(${EXE_NAME} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -if (BUILD_ZEPHYR) - family_configure_device_example(${EXE_NAME} zephyr) -else() - family_configure_device_example(${EXE_NAME} noos) -endif() +family_configure_device_example(${EXE_NAME} ${RTOS}) diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 1c00ae0b2..b07f92342 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -16,7 +16,7 @@ if(FAMILY STREQUAL "espressif") return() endif() -if (BUILD_ZEPHYR) +if (RTOS STREQUAL zephyr) set(EXE_NAME app) else() set(EXE_NAME ${PROJECT}) @@ -37,8 +37,4 @@ target_include_directories(${EXE_NAME} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -if (BUILD_ZEPHYR) - family_configure_device_example(${EXE_NAME} zephyr) -else() - family_configure_device_example(${EXE_NAME} noos) -endif() +family_configure_device_example(${EXE_NAME} ${RTOS}) diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 8c39168e8..3955bfb49 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -15,7 +15,7 @@ if(FAMILY STREQUAL "espressif") return() endif() -if (BUILD_ZEPHYR) +if (RTOS STREQUAL zephyr) set(EXE_NAME app) else() set(EXE_NAME ${PROJECT}) @@ -36,8 +36,4 @@ target_include_directories(${EXE_NAME} PUBLIC # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -if (BUILD_ZEPHYR) - family_configure_device_example(${EXE_NAME} zephyr) -else() - family_configure_device_example(${EXE_NAME} noos) -endif() +family_configure_device_example(${EXE_NAME} ${RTOS}) diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index 09c32c7d4..18227f702 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -94,7 +94,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_BCM2835 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_BCM2835) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index 566daefb3..f5245be36 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -101,7 +101,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index 92acaed80..9b395e92d 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -98,7 +98,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_CH32V103 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CH32V103) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index d4f25f25f..9748184c2 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -123,7 +123,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index 0fd78fa03..e4b84198c 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -113,7 +113,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_CH32V307) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbhs.c ${TOP}/src/portable/wch/dcd_ch32_usbfs.c diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index ca6b57635..7bb6f5d86 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -126,7 +126,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_DA1469X ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_DA1469X) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/dialog/da146xx/dcd_da146xx.c ) diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake index 013e61dde..0565f7545 100644 --- a/hw/bsp/f1c100s/family.cmake +++ b/hw/bsp/f1c100s/family.cmake @@ -100,7 +100,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_F1C100S ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_F1C100S) target_sources(${TARGET}-tinyusb PRIVATE ${TOP}/src/portable/sunxi/dcd_sunxi_musb.c ) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 14916f771..1e86529ed 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -8,6 +8,13 @@ get_filename_component(TOP ${TOP} ABSOLUTE) set(UF2CONV_PY ${TOP}/tools/uf2/utils/uf2conv.py) +#------------------------------------------------------------- +# RTOS +#------------------------------------------------------------- +if (NOT DEFINED RTOS) + set(RTOS noos) +endif () + #------------------------------------------------------------- # Toolchain # Can be changed via -DTOOLCHAIN=gcc|iar or -DCMAKE_C_COMPILER= @@ -27,7 +34,6 @@ if (DEFINED CMAKE_C_COMPILER) endif () endif () -# default to gcc if (NOT DEFINED TOOLCHAIN) set(TOOLCHAIN gcc) endif () @@ -73,7 +79,7 @@ if (NOT NO_WARN_RWX_SEGMENTS_SUPPORTED) set(NO_WARN_RWX_SEGMENTS_SUPPORTED 1) endif() -if (BUILD_ZEPHYR) +if (RTOS STREQUAL zephyr) set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) find_package(Zephyr REQUIRED HINTS ${TOP}/zephyr) endif () @@ -170,7 +176,6 @@ function(family_add_rtos TARGET RTOS) elseif (RTOS STREQUAL "zephyr") target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_ZEPHYR) target_include_directories(${TARGET} PUBLIC ${ZEPHYR_BASE}/include) -# target_link_libraries(${TARGET} PUBLIC kernel) endif () endfunction() @@ -237,7 +242,7 @@ function(family_configure_common TARGET RTOS) ) target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 - AND NO_WARN_RWX_SEGMENTS_SUPPORTED AND (NOT BUILD_ZEPHYR)) + AND NO_WARN_RWX_SEGMENTS_SUPPORTED AND (NOT RTOS STREQUAL zephyr)) target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") endif () elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") @@ -253,8 +258,8 @@ function(family_configure_common TARGET RTOS) # endif () endfunction() -# Add tinyusb to target (TODO remove RTOS) -function(family_add_tinyusb TARGET OPT_MCU RTOS) +# Add tinyusb to target +function(family_add_tinyusb TARGET OPT_MCU) # tinyusb's CMakeList.txt add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) @@ -401,7 +406,7 @@ function(family_flash_jlink TARGET) endif () separate_arguments(OPTION_LIST UNIX_COMMAND ${JLINK_OPTION}) - if (BUILD_ZEPHYR) + if (RTOS STREQUAL zephyr) set(BINARY_TARGET zephyr_final) set(NAME_TARGET ${CMAKE_PROJECT_NAME}) else () diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index 132730086..d8141a7b3 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -77,7 +77,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/valentyusb/eptri/dcd_eptri.c ) diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index 273fea39f..5b145692f 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -105,7 +105,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 5a31e42a6..8ec96bf33 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -138,7 +138,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) target_sources(${TARGET}-tinyusb PRIVATE ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index 7fd3f6353..e9993ed7b 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -97,7 +97,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index 25710a4c2..a76b05745 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -92,7 +92,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K32L ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K32L) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/khci/dcd_khci.c ${TOP}/src/portable/nxp/khci/hcd_khci.c diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index d8d8d3631..c0ca0e77a 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -96,7 +96,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c diff --git a/hw/bsp/lpc11/family.cmake b/hw/bsp/lpc11/family.cmake index a3efecb99..e11268bb2 100644 --- a/hw/bsp/lpc11/family.cmake +++ b/hw/bsp/lpc11/family.cmake @@ -90,7 +90,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC11UXX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC11UXX) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) diff --git a/hw/bsp/lpc13/family.cmake b/hw/bsp/lpc13/family.cmake index d360048ed..500ddb3b0 100644 --- a/hw/bsp/lpc13/family.cmake +++ b/hw/bsp/lpc13/family.cmake @@ -87,7 +87,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC13XX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC13XX) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake index 5ad12501a..daad44bc0 100644 --- a/hw/bsp/lpc15/family.cmake +++ b/hw/bsp/lpc15/family.cmake @@ -89,7 +89,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC15XX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC15XX) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 4f2aae19b..7e7f036de 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -86,7 +86,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC175X_6X ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC175X_6X) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 70dad48c3..5542496f0 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -84,7 +84,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 0bcdc6037..afbf6a22f 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -87,7 +87,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 9ed937c24..620b4baa2 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -92,7 +92,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC43XX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC43XX) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index 94d6b0bf0..be3e9f02d 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -106,7 +106,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC51 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC51) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index eb76de6b6..af5ee823b 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -139,7 +139,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC54 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC54) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 6a06846c4..2d99daf21 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -140,7 +140,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC55 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC55) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake index 0978bf0dc..d114e0948 100644 --- a/hw/bsp/max32650/family.cmake +++ b/hw/bsp/max32650/family.cmake @@ -130,7 +130,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32650 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MAX32650) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) diff --git a/hw/bsp/max32666/family.cmake b/hw/bsp/max32666/family.cmake index 0ef9bcdcc..a78e74670 100644 --- a/hw/bsp/max32666/family.cmake +++ b/hw/bsp/max32666/family.cmake @@ -125,7 +125,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32666 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MAX32666) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) diff --git a/hw/bsp/max32690/family.cmake b/hw/bsp/max32690/family.cmake index d5d1bb3ba..d79403dee 100644 --- a/hw/bsp/max32690/family.cmake +++ b/hw/bsp/max32690/family.cmake @@ -130,7 +130,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32690 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MAX32690) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) diff --git a/hw/bsp/max78002/family.cmake b/hw/bsp/max78002/family.cmake index b836408fc..7e65f58ed 100644 --- a/hw/bsp/max78002/family.cmake +++ b/hw/bsp/max78002/family.cmake @@ -134,7 +134,7 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX78002 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MAX78002) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 0a7501ca3..8eed8f19b 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -110,9 +110,9 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source if (${FAMILY_MCUS} STREQUAL "MCXN9") - family_add_tinyusb(${TARGET} OPT_MCU_MCXN9 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MCXN9) elseif(${FAMILY_MCUS} STREQUAL "MCXA15") - family_add_tinyusb(${TARGET} OPT_MCU_MCXA15 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MCXA15) endif() target_sources(${TARGET}-tinyusb PUBLIC diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index e0fb0ca93..eea1ae85e 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -87,7 +87,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MM32F327X ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MM32F327X) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c ) diff --git a/hw/bsp/msp430/family.cmake b/hw/bsp/msp430/family.cmake index 64bcb3fd2..94e045ae5 100644 --- a/hw/bsp/msp430/family.cmake +++ b/hw/bsp/msp430/family.cmake @@ -69,7 +69,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MSP430x5xx ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MSP430x5xx) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c ) diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index 6a6650e28..b46af45fa 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -85,7 +85,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MSP432E4 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_MSP432E4) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ${TOP}/src/portable/mentor/musb/hcd_musb.c diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 1e7a4fe82..2d2a12e7e 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -25,10 +25,6 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (BUILD_ZEPHYR) - return() - endif () - if (TARGET ${BOARD_TARGET}) return() endif () @@ -114,8 +110,8 @@ endfunction() function(family_configure_example TARGET RTOS) # Board target - add_board_target(board_${BOARD}) - if (NOT BUILD_ZEPHYR) + if (NOT RTOS STREQUAL zephyr) + add_board_target(board_${BOARD}) target_link_libraries(${TARGET} PUBLIC board_${BOARD}) endif () @@ -136,7 +132,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_NRF5X) target_sources(${TARGET} PRIVATE ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c ) diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index f920a8219..8ae8e9b59 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -147,7 +147,7 @@ function(family_configure_example TARGET RTOS) # endif () # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_RAXXX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_RAXXX) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index c794d8f37..4a40ca063 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -100,7 +100,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMD11 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMD11) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) diff --git a/hw/bsp/samd21/family.cmake b/hw/bsp/samd21/family.cmake index b946dc4c0..4a10d6224 100644 --- a/hw/bsp/samd21/family.cmake +++ b/hw/bsp/samd21/family.cmake @@ -96,7 +96,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMD21 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMD21) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) diff --git a/hw/bsp/samd5x_e5x/family.cmake b/hw/bsp/samd5x_e5x/family.cmake index 1153a5fbd..50e0ec66d 100644 --- a/hw/bsp/samd5x_e5x/family.cmake +++ b/hw/bsp/samd5x_e5x/family.cmake @@ -93,7 +93,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMD51 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMD51) target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake index 4a1cbd730..aef17d379 100644 --- a/hw/bsp/samg/family.cmake +++ b/hw/bsp/samg/family.cmake @@ -98,7 +98,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAMG ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAMG) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/microchip/samg/dcd_samg.c ) diff --git a/hw/bsp/saml2x/family.cmake b/hw/bsp/saml2x/family.cmake index bf6b0e251..37e282a18 100644 --- a/hw/bsp/saml2x/family.cmake +++ b/hw/bsp/saml2x/family.cmake @@ -100,7 +100,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_SAML22 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_SAML22) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index dd0fd4074..ca6a93adf 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -102,7 +102,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32C0 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32C0) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index 7187d0573..c0da094d7 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -100,7 +100,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F0 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F0) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 09a93e483..4eba6df93 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -99,7 +99,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F1 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F1) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index 7f9839442..6a22d1550 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -99,7 +99,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F2 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F2) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 50fede817..053bbbacc 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -97,7 +97,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F3 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F3) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index 10b98b7a6..5f12eb8b2 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -125,7 +125,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F4 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F4) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index f7001a2ed..8cc18935d 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -127,7 +127,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32F7 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32F7) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 7ac19693c..2ab5719bc 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -101,7 +101,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32G0 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index e0fca4b30..d51b3599a 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -97,7 +97,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32G4 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index a2e4c6e8e..54392fe1a 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -101,7 +101,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32H5 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32H5) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index 65f6884da..e50bbf4a2 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -132,7 +132,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32H7 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32H7) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 5f29d254d..435c658ec 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -101,7 +101,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32L0 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32L0) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 6a967de6f..4d2ccf178 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -101,7 +101,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 0a2ad568d..2cbe5cf38 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -101,7 +101,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_STM32U5 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_STM32U5) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index 868b58f71..d6d841baa 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -104,7 +104,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS} ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 110bd9f10..833b6c5e4 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -79,7 +79,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_TM4C123 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_TM4C123) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ${TOP}/src/portable/mentor/musb/hcd_musb.c diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index 6266f8f94..be72d349f 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -83,7 +83,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_XMC4000 ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_XMC4000) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c -- cgit v1.3.1 From 6b3a5957c2e84a093854eaf6afea352d67324136 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Jan 2025 16:08:40 +0700 Subject: cmake remove EXAMPLE-tinyusb target as library --- .github/workflows/build.yml | 6 +++--- hw/bsp/broadcom_32bit/family.cmake | 7 +++---- hw/bsp/broadcom_64bit/family.cmake | 7 +++---- hw/bsp/ch32v10x/family.cmake | 7 +++---- hw/bsp/ch32v20x/family.cmake | 7 +++---- hw/bsp/ch32v307/family.cmake | 7 +++---- hw/bsp/da1469x/family.cmake | 7 +++---- hw/bsp/f1c100s/family.cmake | 7 +++---- hw/bsp/fomu/family.cmake | 7 +++---- hw/bsp/gd32vf103/family.cmake | 7 +++---- hw/bsp/imxrt/family.cmake | 7 +++---- hw/bsp/kinetis_k/family.cmake | 7 +++---- hw/bsp/kinetis_k32l2/family.cmake | 7 +++---- hw/bsp/kinetis_kl/family.cmake | 7 +++---- hw/bsp/lpc11/family.cmake | 7 +++---- hw/bsp/lpc13/family.cmake | 7 +++---- hw/bsp/lpc15/family.cmake | 7 +++---- hw/bsp/lpc17/family.cmake | 7 +++---- hw/bsp/lpc18/family.cmake | 7 +++---- hw/bsp/lpc40/family.cmake | 7 +++---- hw/bsp/lpc43/family.cmake | 7 +++---- hw/bsp/lpc51/family.cmake | 7 +++---- hw/bsp/lpc54/family.cmake | 7 +++---- hw/bsp/lpc55/family.cmake | 7 +++---- hw/bsp/max32650/family.cmake | 9 ++++----- hw/bsp/max32666/family.cmake | 9 ++++----- hw/bsp/max32690/family.cmake | 9 ++++----- hw/bsp/max78002/family.cmake | 9 ++++----- hw/bsp/mcx/family.cmake | 7 +++---- hw/bsp/mm32/family.cmake | 7 +++---- hw/bsp/msp430/family.cmake | 6 ++---- hw/bsp/msp432e4/family.cmake | 7 +++---- hw/bsp/nrf/family.cmake | 5 ++--- hw/bsp/ra/family.cmake | 7 +++---- hw/bsp/samd11/family.cmake | 7 +++---- hw/bsp/samg/family.cmake | 7 +++---- hw/bsp/saml2x/family.cmake | 7 +++---- hw/bsp/stm32c0/family.cmake | 7 +++---- hw/bsp/stm32f0/family.cmake | 7 +++---- hw/bsp/stm32f1/family.cmake | 7 +++---- hw/bsp/stm32f2/family.cmake | 7 +++---- hw/bsp/stm32f3/family.cmake | 7 +++---- hw/bsp/stm32f4/family.cmake | 7 +++---- hw/bsp/stm32f7/family.cmake | 7 +++---- hw/bsp/stm32g0/family.cmake | 7 +++---- hw/bsp/stm32g4/family.cmake | 7 +++---- hw/bsp/stm32h5/family.cmake | 7 +++---- hw/bsp/stm32h7/family.cmake | 7 +++---- hw/bsp/stm32l0/family.cmake | 7 +++---- hw/bsp/stm32l4/family.cmake | 7 +++---- hw/bsp/stm32u5/family.cmake | 7 +++---- hw/bsp/stm32wb/family.cmake | 7 +++---- hw/bsp/tm4c/family.cmake | 7 +++---- hw/bsp/xmc4000/family.cmake | 7 +++---- 54 files changed, 164 insertions(+), 218 deletions(-) (limited to 'hw/bsp/ra') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index cd5619a44..355b6b5c4 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -59,7 +59,7 @@ jobs: toolchain: # - 'arm-clang' is built by circle-ci in PR - 'aarch64-gcc' -# - 'arm-gcc' + - 'arm-gcc' - 'msp430-gcc' - 'riscv-gcc' with: @@ -72,7 +72,7 @@ jobs: # Build Make (built by circle-ci in PR, only build on push here) # --------------------------------------- make: - if: github.event_name == 'push' && false + if: github.event_name == 'push' needs: set-matrix uses: ./.github/workflows/build_util.yml strategy: @@ -113,7 +113,7 @@ jobs: # Build IAR on HFP self-hosted # --------------------------------------- arm-iar: - if: github.repository_owner == 'hathach' && github.event_name == 'push' && false + if: github.repository_owner == 'hathach' && github.event_name == 'push' needs: set-matrix runs-on: [self-hosted, Linux, X64, hifiphile] env: diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index 18227f702..5e57d8b1e 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -95,15 +95,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_BCM2835) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index f5245be36..1a088c2c0 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -102,15 +102,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index 9b395e92d..a73898050 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -100,13 +100,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V103) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 9748184c2..a5976e0ea 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -125,14 +125,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index e4b84198c..446e850c5 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -114,14 +114,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V307) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbhs.c ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index 7bb6f5d86..20d6cbc44 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -127,13 +127,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_DA1469X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/dialog/da146xx/dcd_da146xx.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake index 0565f7545..211c6645c 100644 --- a/hw/bsp/f1c100s/family.cmake +++ b/hw/bsp/f1c100s/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_F1C100S) - target_sources(${TARGET}-tinyusb PRIVATE + target_sources(${TARGET} PRIVATE ${TOP}/src/portable/sunxi/dcd_sunxi_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index d8141a7b3..639373695 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -78,13 +78,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/valentyusb/eptri/dcd_eptri.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index 5b145692f..a47871b38 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -106,15 +106,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 8ec96bf33..f08ccb3e5 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -139,15 +139,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) - target_sources(${TARGET}-tinyusb PRIVATE + target_sources(${TARGET} PRIVATE ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index e9993ed7b..ce91777c9 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -98,14 +98,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index a76b05745..946614a03 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -93,14 +93,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K32L) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/khci/dcd_khci.c ${TOP}/src/portable/nxp/khci/hcd_khci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index c0ca0e77a..51a646258 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -97,14 +97,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc11/family.cmake b/hw/bsp/lpc11/family.cmake index e11268bb2..a9febfc7f 100644 --- a/hw/bsp/lpc11/family.cmake +++ b/hw/bsp/lpc11/family.cmake @@ -91,13 +91,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC11UXX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc13/family.cmake b/hw/bsp/lpc13/family.cmake index 500ddb3b0..e3c0b18c7 100644 --- a/hw/bsp/lpc13/family.cmake +++ b/hw/bsp/lpc13/family.cmake @@ -88,13 +88,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC13XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake index daad44bc0..761c5a619 100644 --- a/hw/bsp/lpc15/family.cmake +++ b/hw/bsp/lpc15/family.cmake @@ -90,13 +90,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC15XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 7e7f036de..771a0f405 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -87,15 +87,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC175X_6X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 5542496f0..6af1149bf 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -85,15 +85,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index afbf6a22f..3a680eae6 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -88,15 +88,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 620b4baa2..9d993a698 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -93,15 +93,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC43XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index be3e9f02d..2146c29f7 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -107,13 +107,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC51) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index af5ee823b..90497b9fb 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -140,13 +140,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC54) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 2d99daf21..cd1eb5f78 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -141,13 +141,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC55) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake index d114e0948..b1d5dded7 100644 --- a/hw/bsp/max32650/family.cmake +++ b/hw/bsp/max32650/family.cmake @@ -131,20 +131,19 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX32650) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max32666/family.cmake b/hw/bsp/max32666/family.cmake index a78e74670..49798729a 100644 --- a/hw/bsp/max32666/family.cmake +++ b/hw/bsp/max32666/family.cmake @@ -126,20 +126,19 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX32666) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max32690/family.cmake b/hw/bsp/max32690/family.cmake index d79403dee..0d544d9e6 100644 --- a/hw/bsp/max32690/family.cmake +++ b/hw/bsp/max32690/family.cmake @@ -131,20 +131,19 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX32690) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max78002/family.cmake b/hw/bsp/max78002/family.cmake index 7e65f58ed..ce0fcfa08 100644 --- a/hw/bsp/max78002/family.cmake +++ b/hw/bsp/max78002/family.cmake @@ -135,17 +135,16 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX78002) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes -Wno-error=redundant-decls ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 8eed8f19b..413c1b372 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -115,14 +115,13 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_MCXA15) endif() - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS ${TOP}/src/portable/chipidea/$ ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index eea1ae85e..0561a63a0 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -88,13 +88,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MM32F327X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/msp430/family.cmake b/hw/bsp/msp430/family.cmake index 94e045ae5..ddd54b675 100644 --- a/hw/bsp/msp430/family.cmake +++ b/hw/bsp/msp430/family.cmake @@ -70,13 +70,11 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MSP430x5xx) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index b46af45fa..f6939ecfe 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -86,14 +86,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MSP432E4) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ${TOP}/src/portable/mentor/musb/hcd_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index abfab1609..7d0a9f6de 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -4,9 +4,8 @@ set(NRFX_PATH ${TOP}/hw/mcu/nordic/nrfx) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # include board specific, for zephyr BOARD_ALIAS may be used instead -if (EXISTS ${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) -else () +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake OPTIONAL RESULT_VARIABLE board_cmake_included) +if (NOT board_cmake_included) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD_ALIAS}/board.cmake) endif () diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 8ae8e9b59..42a32631c 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -148,15 +148,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_RAXXX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c ${TOP}/src/portable/renesas/rusb2/rusb2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index 4a40ca063..965b1cfb5 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAMD11) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake index aef17d379..eb00c8c52 100644 --- a/hw/bsp/samg/family.cmake +++ b/hw/bsp/samg/family.cmake @@ -99,13 +99,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAMG) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samg/dcd_samg.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/saml2x/family.cmake b/hw/bsp/saml2x/family.cmake index 37e282a18..49f2e3e75 100644 --- a/hw/bsp/saml2x/family.cmake +++ b/hw/bsp/saml2x/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAML22) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index ca6a93adf..c6a90fff6 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -103,14 +103,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32C0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index c0da094d7..12c7b592c 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 4eba6df93..cbb9c3568 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -100,13 +100,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F1) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index 6a22d1550..dc6bc2885 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -100,15 +100,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F2) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 053bbbacc..0ba2920d5 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -98,13 +98,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F3) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index 5f12eb8b2..db5736192 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -126,15 +126,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F4) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 8cc18935d..1a3365332 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -128,15 +128,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F7) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 2ab5719bc..4da26f27e 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -102,14 +102,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index d51b3599a..5ec9926fe 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -98,14 +98,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 54392fe1a..1df6bcb90 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -102,14 +102,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32H5) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index e50bbf4a2..b4f0bebbf 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -133,15 +133,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32H7) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 435c658ec..954bdb158 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -102,13 +102,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32L0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 4d2ccf178..eebcff4f3 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -102,16 +102,15 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 2cbe5cf38..7a5935961 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -102,17 +102,16 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32U5) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c #${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index d6d841baa..0ea937257 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -105,13 +105,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 833b6c5e4..e1cf94e96 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -80,14 +80,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_TM4C123) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ${TOP}/src/portable/mentor/musb/hcd_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index be72d349f..6edd72caf 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -84,15 +84,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_XMC4000) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) -- cgit v1.3.1