From 1d29817139c473971ce239bbc2cb5924de4a644e Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 1 Mar 2022 23:55:53 +0700 Subject: start to add pio usb (host) support run as proof of concept --- hw/bsp/rp2040/family.c | 3 +++ hw/bsp/rp2040/family.cmake | 20 ++++++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) (limited to 'hw') diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index fa63dadf5..dcf38b6ec 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -127,6 +127,9 @@ void board_init(void) #ifndef BUTTON_BOOTSEL #endif + // Set the system clock to a multiple of 120mhz for bitbanging USB with pico-usb + set_sys_clock_khz(120000, true); + #if defined(UART_DEV) && defined(LIB_PICO_STDIO_UART) bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART)); uart_inst = uart_get_instance(UART_DEV); diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 1aa180ef8..ddb34bf7d 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -89,13 +89,27 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/class/hid/hid_host.c ${TOP}/src/class/msc/msc_host.c ${TOP}/src/class/vendor/vendor_host.c + + ${TOP}/src/portable/raspberrypi/pio/hcd_pio.c + ${TOP}/lib/Pico-PIO-USB/pio_usb.c + ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) - # Sometimes have to do host specific actions in mostly - # common functions + # Sometimes have to do host specific actions in mostly common functions target_compile_definitions(tinyusb_host_base INTERFACE RP2040_USB_HOST_MODE=1 ) + + # config for host pio + target_link_libraries(tinyusb_host_base INTERFACE + hardware_dma + hardware_pio + pico_multicore + ) + + target_include_directories(tinyusb_host_base INTERFACE + ${TOP}/lib/Pico-PIO-USB + ) add_library(tinyusb_bsp INTERFACE) target_sources(tinyusb_bsp INTERFACE @@ -151,6 +165,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) _family_initialize_project(${PROJECT} ${DIR}) enable_language(C CXX ASM) pico_sdk_init() + pico_generate_pio_header(tinyusb_host_base ${TOP}/lib/Pico-PIO-USB/usb_tx.pio) + pico_generate_pio_header(tinyusb_host_base ${TOP}/lib/Pico-PIO-USB/usb_rx.pio) endfunction() # This method must be called from the project scope to suppress known warnings in TinyUSB source files -- cgit v1.3.1 From e2f0aef93b246368e1f6bdf101604e73d252801a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 30 Mar 2022 16:41:55 +0700 Subject: make use pio_usb_port_reset_start/end --- hw/bsp/rp2040/family.cmake | 1 + src/portable/raspberrypi/pio/hcd_pio.c | 10 ++-------- 2 files changed, 3 insertions(+), 8 deletions(-) (limited to 'hw') diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 23ea893b7..b56ee6a6d 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -91,6 +91,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/portable/raspberrypi/pio/hcd_pio.c ${TOP}/lib/Pico-PIO-USB/pio_usb.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_port.c ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) diff --git a/src/portable/raspberrypi/pio/hcd_pio.c b/src/portable/raspberrypi/pio/hcd_pio.c index 8d1903f85..e4a4e2450 100644 --- a/src/portable/raspberrypi/pio/hcd_pio.c +++ b/src/portable/raspberrypi/pio/hcd_pio.c @@ -53,8 +53,6 @@ extern pio_port_t pio_port[1]; extern root_port_t root_port[PIO_USB_ROOT_PORT_CNT]; extern endpoint_t ep_pool[PIO_USB_EP_POOL_CNT]; - -extern port_pin_status_t get_port_pin_status( root_port_t *port); extern void configure_fullspeed_host( pio_port_t *pp, const pio_usb_configuration_t *c, root_port_t *port); extern void configure_lowspeed_host( pio_port_t *pp, const pio_usb_configuration_t *c, root_port_t *port); @@ -83,10 +81,7 @@ void hcd_port_reset(uint8_t rhport) pio_port_t *pp = &pio_port[0]; root_port_t *root = &root_port[rhport]; - pio_sm_set_pins_with_mask(pp->pio_usb_tx, pp->sm_tx, (0b00 << root->pin_dp), - (0b11u << root->pin_dp)); - pio_sm_set_pindirs_with_mask(pp->pio_usb_tx, pp->sm_tx, (0b11u << root->pin_dp), - (0b11u << root->pin_dp)); + pio_usb_port_reset_start(root, pp); } void hcd_port_reset_end(uint8_t rhport) @@ -96,8 +91,7 @@ void hcd_port_reset_end(uint8_t rhport) pio_port_t *pp = &pio_port[0]; root_port_t *root = &root_port[rhport]; - pio_sm_set_pindirs_with_mask(pp->pio_usb_tx, pp->sm_tx, (0b00u << root->pin_dp), - (0b11u << root->pin_dp)); + pio_usb_port_reset_end(root, pp); busy_wait_us(100); -- cgit v1.3.1 From db6cba6a7bdf82f8c131fa2c521b86b10b4d053e Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 1 Apr 2022 16:38:41 +0700 Subject: rename pio to pio_usb --- hw/bsp/rp2040/family.cmake | 2 +- src/portable/raspberrypi/pio/hcd_pio.c | 274 ------------------------- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 274 +++++++++++++++++++++++++ 3 files changed, 275 insertions(+), 275 deletions(-) delete mode 100644 src/portable/raspberrypi/pio/hcd_pio.c create mode 100644 src/portable/raspberrypi/pio_usb/hcd_pio_usb.c (limited to 'hw') diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index b56ee6a6d..4cec645a2 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -89,7 +89,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/class/msc/msc_host.c ${TOP}/src/class/vendor/vendor_host.c - ${TOP}/src/portable/raspberrypi/pio/hcd_pio.c + ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ${TOP}/lib/Pico-PIO-USB/pio_usb.c ${TOP}/lib/Pico-PIO-USB/pio_usb_port.c ${TOP}/lib/Pico-PIO-USB/usb_crc.c diff --git a/src/portable/raspberrypi/pio/hcd_pio.c b/src/portable/raspberrypi/pio/hcd_pio.c deleted file mode 100644 index 037ebc132..000000000 --- a/src/portable/raspberrypi/pio/hcd_pio.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && CFG_TUH_RPI_PIO_USB - -#include "pico.h" -#include "hardware/pio.h" -#include "pio_usb.h" - -//--------------------------------------------------------------------+ -// INCLUDE -//--------------------------------------------------------------------+ -#include "osal/osal.h" - -#include "host/hcd.h" -#include "host/usbh.h" - -#define RHPORT_OFFSET 1 -#define RHPORT_PIO(_x) ((_x)-RHPORT_OFFSET) - - -static usb_device_t *_test_usb_device = NULL; -static pio_usb_configuration_t pio_host_config = PIO_USB_DEFAULT_CONFIG; - -extern root_port_t root_port[PIO_USB_ROOT_PORT_CNT]; -extern usb_device_t usb_device[PIO_USB_DEVICE_CNT]; -extern pio_port_t pio_port[1]; -extern root_port_t root_port[PIO_USB_ROOT_PORT_CNT]; -extern endpoint_t ep_pool[PIO_USB_EP_POOL_CNT]; - -//--------------------------------------------------------------------+ -// HCD API -//--------------------------------------------------------------------+ -bool hcd_init(uint8_t rhport) -{ - // To run USB SOF interrupt in core1, create alarm pool in core1. - pio_host_config.alarm_pool = (void*)alarm_pool_create(2, 1); - _test_usb_device = pio_usb_host_init(&pio_host_config); - - return true; -} - -void hcd_port_reset(uint8_t rhport) -{ - rhport = RHPORT_PIO(rhport); - - pio_port_t *pp = &pio_port[0]; - root_port_t *root = &root_port[rhport]; - - pio_usb_port_reset_start(root, pp); -} - -void hcd_port_reset_end(uint8_t rhport) -{ - rhport = RHPORT_PIO(rhport); - - pio_port_t *pp = &pio_port[0]; - root_port_t *root = &root_port[rhport]; - - pio_usb_port_reset_end(root, pp); - - busy_wait_us(100); - - // TODO slow speed - bool fullspeed_flag = true; - - if (fullspeed_flag && get_port_pin_status(root) == PORT_PIN_FS_IDLE) { - root->root_device = &usb_device[0]; - if (!root->root_device->connected) { -// configure_fullspeed_host(pp, &pio_host_config, root); - root->root_device->is_fullspeed = true; - root->root_device->is_root = true; - root->root_device->connected = true; - root->root_device->root = root; - root->root_device->event = EVENT_CONNECT; - } - } else if (!fullspeed_flag && get_port_pin_status(root) == PORT_PIN_LS_IDLE) { - root->root_device = &usb_device[0]; - if (!root->root_device->connected) { -// configure_lowspeed_host(pp, &pio_host_config, root); - root->root_device->is_fullspeed = false; - root->root_device->is_root = true; - root->root_device->connected = true; - root->root_device->root = root; - root->root_device->event = EVENT_CONNECT; - } - } -} - -bool hcd_port_connect_status(uint8_t rhport) -{ - root_port_t* port = &root_port[0]; - bool dp = gpio_get(port->pin_dp); - bool dm = gpio_get(port->pin_dm); - return dp || dm; -} - -tusb_speed_t hcd_port_speed_get(uint8_t rhport) -{ - // TODO determine link speed - return TUSB_SPEED_FULL; -} - -// Close all opened endpoint belong to this device -void hcd_device_close(uint8_t rhport, uint8_t dev_addr) -{ -} - -uint32_t hcd_frame_number(uint8_t rhport) -{ - return 0; -} - -void hcd_int_enable(uint8_t rhport) -{ -} - -void hcd_int_disable(uint8_t rhport) -{ -} - -//--------------------------------------------------------------------+ -// Endpoint API -//--------------------------------------------------------------------+ - -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep) -{ - rhport = RHPORT_PIO(rhport); - - usb_device_t *device = &usb_device[0]; - - return pio_usb_endpoint_open(rhport, dev_addr, (uint8_t const*) desc_ep); -} - -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) -{ - rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_transfer(rhport, dev_addr, ep_addr, buffer, buflen); -} - -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) -{ - rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_send_setup(rhport, dev_addr, setup_packet); -} - -//bool hcd_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) -//{ -// // EPX is shared, so multiple device addresses and endpoint addresses share that -// // so if any transfer is active on epx, we are busy. Interrupt endpoints have their own -// // EPX so ep->active will only be busy if there is a pending transfer on that interrupt endpoint -// // on that device -// pico_trace("hcd_edpt_busy dev addr %d ep_addr 0x%x\n", dev_addr, ep_addr); -// struct hw_endpoint *ep = get_dev_ep(dev_addr, ep_addr); -// assert(ep); -// bool busy = ep->active; -// pico_trace("busy == %d\n", busy); -// return busy; -//} - -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ - (void) dev_addr; - (void) ep_addr; - - return true; -} - -void __no_inline_not_in_flash_func(handle_endpoint_irq)(root_port_t* port, uint32_t flag) -{ - volatile uint32_t* ep_reg; - xfer_result_t result; - - if ( flag == PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) - { - ep_reg = &port->ep_complete; - result = XFER_RESULT_SUCCESS; - } - else if ( flag == PIO_USB_INTS_ENDPOINT_ERROR_BITS ) - { - ep_reg = &port->ep_error; - result = XFER_RESULT_FAILED; - } - else if ( flag == PIO_USB_INTS_ENDPOINT_STALLED_BITS ) - { - ep_reg = &port->ep_stalled; - result = XFER_RESULT_STALLED; - } - else - { - // something wrong - return; - } - - const uint32_t ep_all = *ep_reg; - - for(uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++) - { - uint32_t const mask = (1u << ep_idx); - - if (ep_all & mask) - { - endpoint_t* ep = PIO_USB_EP(ep_idx); - hcd_event_xfer_complete(ep->dev_addr, ep->ep_num, ep->actual_len, result, true); - } - } - - // clear all - (*ep_reg) &= ~ep_all; -} - -// IRQ Handler -void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) -{ - root_port_t* port = PIO_USB(root_id); - - if ( port->ints & PIO_USB_INTS_CONNECT_BITS ) - { - port->ints &= ~PIO_USB_INTS_CONNECT_BITS; - - hcd_event_device_attach(root_id+1, true); - } - - if ( port->ints & PIO_USB_INTS_DISCONNECT_BITS ) - { - port->ints &= ~PIO_USB_INTS_DISCONNECT_BITS; - hcd_event_device_remove(root_id+1, true); - } - - if ( port->ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) - { - port->ints &= ~PIO_USB_INTS_ENDPOINT_COMPLETE_BITS; - handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_COMPLETE_BITS); - } - - if ( port->ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) - { - port->ints &= ~PIO_USB_INTS_ENDPOINT_ERROR_BITS; - handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_ERROR_BITS); - } - - if ( port->ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) - { - port->ints &= ~PIO_USB_INTS_ENDPOINT_STALLED_BITS; - handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_STALLED_BITS); - } -} - -#endif diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c new file mode 100644 index 000000000..037ebc132 --- /dev/null +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -0,0 +1,274 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && CFG_TUH_RPI_PIO_USB + +#include "pico.h" +#include "hardware/pio.h" +#include "pio_usb.h" + +//--------------------------------------------------------------------+ +// INCLUDE +//--------------------------------------------------------------------+ +#include "osal/osal.h" + +#include "host/hcd.h" +#include "host/usbh.h" + +#define RHPORT_OFFSET 1 +#define RHPORT_PIO(_x) ((_x)-RHPORT_OFFSET) + + +static usb_device_t *_test_usb_device = NULL; +static pio_usb_configuration_t pio_host_config = PIO_USB_DEFAULT_CONFIG; + +extern root_port_t root_port[PIO_USB_ROOT_PORT_CNT]; +extern usb_device_t usb_device[PIO_USB_DEVICE_CNT]; +extern pio_port_t pio_port[1]; +extern root_port_t root_port[PIO_USB_ROOT_PORT_CNT]; +extern endpoint_t ep_pool[PIO_USB_EP_POOL_CNT]; + +//--------------------------------------------------------------------+ +// HCD API +//--------------------------------------------------------------------+ +bool hcd_init(uint8_t rhport) +{ + // To run USB SOF interrupt in core1, create alarm pool in core1. + pio_host_config.alarm_pool = (void*)alarm_pool_create(2, 1); + _test_usb_device = pio_usb_host_init(&pio_host_config); + + return true; +} + +void hcd_port_reset(uint8_t rhport) +{ + rhport = RHPORT_PIO(rhport); + + pio_port_t *pp = &pio_port[0]; + root_port_t *root = &root_port[rhport]; + + pio_usb_port_reset_start(root, pp); +} + +void hcd_port_reset_end(uint8_t rhport) +{ + rhport = RHPORT_PIO(rhport); + + pio_port_t *pp = &pio_port[0]; + root_port_t *root = &root_port[rhport]; + + pio_usb_port_reset_end(root, pp); + + busy_wait_us(100); + + // TODO slow speed + bool fullspeed_flag = true; + + if (fullspeed_flag && get_port_pin_status(root) == PORT_PIN_FS_IDLE) { + root->root_device = &usb_device[0]; + if (!root->root_device->connected) { +// configure_fullspeed_host(pp, &pio_host_config, root); + root->root_device->is_fullspeed = true; + root->root_device->is_root = true; + root->root_device->connected = true; + root->root_device->root = root; + root->root_device->event = EVENT_CONNECT; + } + } else if (!fullspeed_flag && get_port_pin_status(root) == PORT_PIN_LS_IDLE) { + root->root_device = &usb_device[0]; + if (!root->root_device->connected) { +// configure_lowspeed_host(pp, &pio_host_config, root); + root->root_device->is_fullspeed = false; + root->root_device->is_root = true; + root->root_device->connected = true; + root->root_device->root = root; + root->root_device->event = EVENT_CONNECT; + } + } +} + +bool hcd_port_connect_status(uint8_t rhport) +{ + root_port_t* port = &root_port[0]; + bool dp = gpio_get(port->pin_dp); + bool dm = gpio_get(port->pin_dm); + return dp || dm; +} + +tusb_speed_t hcd_port_speed_get(uint8_t rhport) +{ + // TODO determine link speed + return TUSB_SPEED_FULL; +} + +// Close all opened endpoint belong to this device +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) +{ +} + +uint32_t hcd_frame_number(uint8_t rhport) +{ + return 0; +} + +void hcd_int_enable(uint8_t rhport) +{ +} + +void hcd_int_disable(uint8_t rhport) +{ +} + +//--------------------------------------------------------------------+ +// Endpoint API +//--------------------------------------------------------------------+ + +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep) +{ + rhport = RHPORT_PIO(rhport); + + usb_device_t *device = &usb_device[0]; + + return pio_usb_endpoint_open(rhport, dev_addr, (uint8_t const*) desc_ep); +} + +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) +{ + rhport = RHPORT_PIO(rhport); + return pio_usb_endpoint_transfer(rhport, dev_addr, ep_addr, buffer, buflen); +} + +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) +{ + rhport = RHPORT_PIO(rhport); + return pio_usb_endpoint_send_setup(rhport, dev_addr, setup_packet); +} + +//bool hcd_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) +//{ +// // EPX is shared, so multiple device addresses and endpoint addresses share that +// // so if any transfer is active on epx, we are busy. Interrupt endpoints have their own +// // EPX so ep->active will only be busy if there is a pending transfer on that interrupt endpoint +// // on that device +// pico_trace("hcd_edpt_busy dev addr %d ep_addr 0x%x\n", dev_addr, ep_addr); +// struct hw_endpoint *ep = get_dev_ep(dev_addr, ep_addr); +// assert(ep); +// bool busy = ep->active; +// pico_trace("busy == %d\n", busy); +// return busy; +//} + +bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) +{ + (void) dev_addr; + (void) ep_addr; + + return true; +} + +void __no_inline_not_in_flash_func(handle_endpoint_irq)(root_port_t* port, uint32_t flag) +{ + volatile uint32_t* ep_reg; + xfer_result_t result; + + if ( flag == PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + { + ep_reg = &port->ep_complete; + result = XFER_RESULT_SUCCESS; + } + else if ( flag == PIO_USB_INTS_ENDPOINT_ERROR_BITS ) + { + ep_reg = &port->ep_error; + result = XFER_RESULT_FAILED; + } + else if ( flag == PIO_USB_INTS_ENDPOINT_STALLED_BITS ) + { + ep_reg = &port->ep_stalled; + result = XFER_RESULT_STALLED; + } + else + { + // something wrong + return; + } + + const uint32_t ep_all = *ep_reg; + + for(uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++) + { + uint32_t const mask = (1u << ep_idx); + + if (ep_all & mask) + { + endpoint_t* ep = PIO_USB_EP(ep_idx); + hcd_event_xfer_complete(ep->dev_addr, ep->ep_num, ep->actual_len, result, true); + } + } + + // clear all + (*ep_reg) &= ~ep_all; +} + +// IRQ Handler +void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) +{ + root_port_t* port = PIO_USB(root_id); + + if ( port->ints & PIO_USB_INTS_CONNECT_BITS ) + { + port->ints &= ~PIO_USB_INTS_CONNECT_BITS; + + hcd_event_device_attach(root_id+1, true); + } + + if ( port->ints & PIO_USB_INTS_DISCONNECT_BITS ) + { + port->ints &= ~PIO_USB_INTS_DISCONNECT_BITS; + hcd_event_device_remove(root_id+1, true); + } + + if ( port->ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + { + port->ints &= ~PIO_USB_INTS_ENDPOINT_COMPLETE_BITS; + handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_COMPLETE_BITS); + } + + if ( port->ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) + { + port->ints &= ~PIO_USB_INTS_ENDPOINT_ERROR_BITS; + handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_ERROR_BITS); + } + + if ( port->ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) + { + port->ints &= ~PIO_USB_INTS_ENDPOINT_STALLED_BITS; + handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_STALLED_BITS); + } +} + +#endif -- cgit v1.3.1 From c25f835aea838f935893fdef6352fab938e11d4b Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 1 Apr 2022 23:31:43 +0700 Subject: update to use pio hw endpoint --- hw/bsp/rp2040/family.cmake | 3 ++- lib/Pico-PIO-USB | 2 +- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'hw') diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 4cec645a2..275ec9e6b 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -91,7 +91,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ${TOP}/lib/Pico-PIO-USB/pio_usb.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_port.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_hw.c ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) diff --git a/lib/Pico-PIO-USB b/lib/Pico-PIO-USB index 650130ab3..72f91ac9c 160000 --- a/lib/Pico-PIO-USB +++ b/lib/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit 650130ab312e0dc9337dc52cccf34d35875abdf7 +Subproject commit 72f91ac9cdaf532eacfbe9534420341b13480441 diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 037ebc132..09407851d 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -225,7 +225,7 @@ void __no_inline_not_in_flash_func(handle_endpoint_irq)(root_port_t* port, uint3 if (ep_all & mask) { - endpoint_t* ep = PIO_USB_EP(ep_idx); + pio_hw_endpoint_t* ep = PIO_USB_HW_EP(ep_idx); hcd_event_xfer_complete(ep->dev_addr, ep->ep_num, ep->actual_len, result, true); } } -- cgit v1.3.1 From d5d4909c20f581ef2046932191f487c001d59ca3 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 8 Apr 2022 13:36:05 +0700 Subject: proof of concpet that device pio-usb work with host pio-usb --- examples/device/hid_boot_interface/src/main.c | 4 +++ .../device/hid_boot_interface/src/tusb_config.h | 3 ++ examples/host/cdc_msc_hid/src/tusb_config.h | 1 + hw/bsp/rp2040/family.cmake | 32 +++++++++------------- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 2 +- src/tusb_option.h | 6 +++- 6 files changed, 27 insertions(+), 21 deletions(-) (limited to 'hw') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index e5e2f6856..ed7f235b7 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -31,6 +31,8 @@ #include "tusb.h" #include "usb_descriptors.h" +#include "pio_usb.h" + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ @@ -59,6 +61,8 @@ int main(void) while (1) { + pio_usb_device_task(); + tud_task(); // tinyusb device task led_blinking_task(); diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index 1c8fa40b2..d4f67e7ba 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -39,6 +39,9 @@ #error CFG_TUSB_MCU must be defined #endif +// Use raspberry pio-usb for device +#define CFG_TUD_RPI_PIO_USB 1 + // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_DEVICE_RHPORT_NUM #define BOARD_DEVICE_RHPORT_NUM 0 diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index 80ee8cb01..9d083c771 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -39,6 +39,7 @@ #error CFG_TUSB_MCU must be defined #endif +// Use raspberry pio-usb for host #define CFG_TUH_RPI_PIO_USB 1 //#define CFG_TUSB_RPI_PIO_INC_PATH 1 diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 275ec9e6b..b186fc78e 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -29,12 +29,17 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_sources(tinyusb_common_base INTERFACE ${TOP}/src/tusb.c ${TOP}/src/common/tusb_fifo.c + ${TOP}/lib/Pico-PIO-USB/pio_usb.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_hw.c + ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) target_include_directories(tinyusb_common_base INTERFACE ${TOP}/src ${TOP}/src/common ${TOP}/hw + ${TOP}/lib/Pico-PIO-USB ) target_link_libraries(tinyusb_common_base INTERFACE @@ -42,6 +47,10 @@ if (NOT TARGET _rp2040_family_inclusion_marker) hardware_irq hardware_resets pico_sync + # for usb-pio + hardware_dma + hardware_pio + pico_multicore ) set(TINYUSB_DEBUG_LEVEL 0) @@ -60,6 +69,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) add_library(tinyusb_device_base INTERFACE) target_sources(tinyusb_device_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c + ${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c ${TOP}/src/device/usbd.c ${TOP}/src/device/usbd_control.c @@ -88,12 +98,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/class/hid/hid_host.c ${TOP}/src/class/msc/msc_host.c ${TOP}/src/class/vendor/vendor_host.c - - ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c - ${TOP}/lib/Pico-PIO-USB/pio_usb.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_hw.c - ${TOP}/lib/Pico-PIO-USB/usb_crc.c + ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ) # Sometimes have to do host specific actions in mostly common functions @@ -101,17 +106,6 @@ if (NOT TARGET _rp2040_family_inclusion_marker) RP2040_USB_HOST_MODE=1 ) - # config for host pio - target_link_libraries(tinyusb_host_base INTERFACE - hardware_dma - hardware_pio - pico_multicore - ) - - target_include_directories(tinyusb_host_base INTERFACE - ${TOP}/lib/Pico-PIO-USB - ) - add_library(tinyusb_bsp INTERFACE) target_sources(tinyusb_bsp INTERFACE ${TOP}/hw/bsp/rp2040/family.c @@ -166,8 +160,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) _family_initialize_project(${PROJECT} ${DIR}) enable_language(C CXX ASM) pico_sdk_init() - pico_generate_pio_header(tinyusb_host_base ${TOP}/lib/Pico-PIO-USB/usb_tx.pio) - pico_generate_pio_header(tinyusb_host_base ${TOP}/lib/Pico-PIO-USB/usb_rx.pio) + pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/usb_tx.pio) + pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/usb_rx.pio) endfunction() # This method must be called from the project scope to suppress known warnings in TinyUSB source files diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 915822798..2d77ad4f9 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -26,7 +26,7 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_RP2040 +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && !CFG_TUD_RPI_PIO_USB #include "pico.h" #include "rp2040_usb.h" diff --git a/src/tusb_option.h b/src/tusb_option.h index 61cc283c4..5636b34fe 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -239,7 +239,7 @@ #define TUH_OPT_RHPORT -1 #endif -#define CFG_TUH_ENABLED ( TUH_RHPORT_MODE & OPT_MODE_HOST ) +#define CFG_TUH_ENABLED (TUH_RHPORT_MODE & OPT_MODE_HOST) // For backward compatible #define TUSB_OPT_DEVICE_ENABLED CFG_TUD_ENABLED @@ -398,6 +398,10 @@ #define CFG_TUH_RPI_PIO_USB 0 #endif +#ifndef CFG_TUD_RPI_PIO_USB +#define CFG_TUD_RPI_PIO_USB 0 +#endif + //------------------------------------------------------------------ // Configuration Validation -- cgit v1.3.1 From cc5a4720e5c1295eacf02c7b81fc4454f29cfaa4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 14 Apr 2022 21:51:49 +0700 Subject: catch up with pio lib --- .../device/hid_boot_interface/src/tusb_config.h | 3 + hw/bsp/rp2040/family.cmake | 5 +- lib/Pico-PIO-USB | 2 +- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 234 +++++++++++++++++++++ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 28 ++- 5 files changed, 254 insertions(+), 18 deletions(-) create mode 100644 src/portable/raspberrypi/pio_usb/dcd_pio_usb.c (limited to 'hw') diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index d4f67e7ba..c8bb8a807 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -41,6 +41,9 @@ // Use raspberry pio-usb for device #define CFG_TUD_RPI_PIO_USB 1 +#if CFG_TUD_RPI_PIO_USB +#define BOARD_DEVICE_RHPORT_NUM 1 +#endif // RHPort number used for device can be defined by board.mk, default to port 0 #ifndef BOARD_DEVICE_RHPORT_NUM diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index b186fc78e..d872c35ea 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -31,6 +31,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/common/tusb_fifo.c ${TOP}/lib/Pico-PIO-USB/pio_usb.c ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_device.c ${TOP}/lib/Pico-PIO-USB/pio_usb_hw.c ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) @@ -69,8 +70,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) add_library(tinyusb_device_base INTERFACE) target_sources(tinyusb_device_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c - ${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c + ${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c ${TOP}/src/device/usbd.c ${TOP}/src/device/usbd_control.c ${TOP}/src/class/audio/audio_device.c @@ -92,13 +93,13 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_sources(tinyusb_host_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c + ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ${TOP}/src/host/usbh.c ${TOP}/src/host/hub.c ${TOP}/src/class/cdc/cdc_host.c ${TOP}/src/class/hid/hid_host.c ${TOP}/src/class/msc/msc_host.c ${TOP}/src/class/vendor/vendor_host.c - ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ) # Sometimes have to do host specific actions in mostly common functions diff --git a/lib/Pico-PIO-USB b/lib/Pico-PIO-USB index 4993f4a1d..84a00b976 160000 --- a/lib/Pico-PIO-USB +++ b/lib/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit 4993f4a1df03c8af13c8091052a6274e8c333bc0 +Subproject commit 84a00b976041d8c34cf660fda6fa88198c9721dc diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c new file mode 100644 index 000000000..08d8b6086 --- /dev/null +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -0,0 +1,234 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_RP2040) && CFG_TUD_RPI_PIO_USB + +#include "pico.h" +#include "hardware/pio.h" +#include "pio_usb.h" + +#include "device/dcd.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +#define RHPORT_OFFSET 1 +#define RHPORT_PIO(_x) ((_x)-RHPORT_OFFSET) + +static uint8_t new_addr = 0; + +//------------- -------------// +static usb_device_t *usb_device = NULL; +static usb_descriptor_buffers_t desc; + +/*------------------------------------------------------------------*/ +/* Device API + *------------------------------------------------------------------*/ + +// Initialize controller to device mode +void dcd_init (uint8_t rhport) +{ + (void) rhport; + + static pio_usb_configuration_t config = PIO_USB_DEFAULT_CONFIG; + usb_device = pio_usb_device_init(&config, &desc); +} + +// Enable device interrupt +void dcd_int_enable (uint8_t rhport) +{ + (void) rhport; +} + +// Disable device interrupt +void dcd_int_disable (uint8_t rhport) +{ + (void) rhport; +} + +// Receive Set Address request, mcu port must also include status IN response +void dcd_set_address (uint8_t rhport, uint8_t dev_addr) +{ + // store addr, will update crc5 lut when status is complete + new_addr = dev_addr; + + dcd_edpt_xfer(rhport, 0x80, NULL, 0); +} + +// Wake up host +void dcd_remote_wakeup (uint8_t rhport) +{ + (void) rhport; +} + +// Connect by enabling internal pull-up resistor on D+/D- +void dcd_connect(uint8_t rhport) +{ + (void) rhport; +} + +// Disconnect by disabling internal pull-up resistor on D+/D- +void dcd_disconnect(uint8_t rhport) +{ + (void) rhport; +} + +//--------------------------------------------------------------------+ +// Endpoint API +//--------------------------------------------------------------------+ + +// Configure endpoint's registers according to descriptor +bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) +{ + (void) rhport; + (void) ep_desc; + return false; +} + +void dcd_edpt_close_all (uint8_t rhport) +{ + (void) rhport; +} + +// Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +{ + uint8_t pio_rhport = RHPORT_PIO(rhport); + return pio_usb_device_endpoint_transfer(pio_rhport, ep_addr, buffer, total_bytes); +} + +// Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c +bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +{ + (void) rhport; + (void) ep_addr; + (void) ff; + (void) total_bytes; + return false; +} + +// Stall endpoint +void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + (void) ep_addr; +} + +// clear stall, data toggle is also reset to DATA0 +void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) +{ + (void) rhport; + (void) ep_addr; +} + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ +extern void update_ep0_crc5_lut(uint8_t addr); + +static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port, uint32_t flag) +{ + volatile uint32_t* ep_reg; + xfer_result_t result; + + if ( flag == PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + { + ep_reg = &port->ep_complete; + result = XFER_RESULT_SUCCESS; + } + else if ( flag == PIO_USB_INTS_ENDPOINT_ERROR_BITS ) + { + ep_reg = &port->ep_error; + result = XFER_RESULT_FAILED; + } + else if ( flag == PIO_USB_INTS_ENDPOINT_STALLED_BITS ) + { + ep_reg = &port->ep_stalled; + result = XFER_RESULT_STALLED; + } + else + { + // something wrong + return; + } + + const uint32_t ep_all = *ep_reg; + + for(uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++) + { + uint32_t const mask = (1u << ep_idx); + + if (ep_all & mask) + { + pio_hw_endpoint_t* ep = PIO_USB_HW_EP(ep_idx); + uint8_t const tu_rhport = port - PIO_USB_HW_RPORT(0) + 1; + + // address is changed, update crc5 lut + if (new_addr && ep->ep_num == 0x80 && ep->actual_len == 0) + { + update_ep0_crc5_lut(new_addr); + new_addr = 0; + } + + dcd_event_xfer_complete(tu_rhport, ep->ep_num, ep->actual_len, result, true); + } + } + + // clear all + (*ep_reg) &= ~ep_all; +} + +// IRQ Handler +void __no_inline_not_in_flash_func(pio_usb_device_irq_handler)(uint8_t root_id) +{ + uint8_t const tu_rhport = root_id + 1; + pio_hw_root_port_t* port = PIO_USB_HW_RPORT(root_id); + uint32_t const ints = port->ints; + + if (ints & PIO_USB_INTS_RESET_END_BITS) + { + new_addr = 0; + dcd_event_bus_reset(tu_rhport, TUSB_SPEED_FULL, true); + } + + if (ints & PIO_USB_INTS_SETUP_REQ_BITS) + { + dcd_event_setup_received(tu_rhport, port->setup_packet, true); + } + + if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + { + handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_COMPLETE_BITS); + } + + // clear all + port->ints &= ~ints; +} + +#endif diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index c2ef54b9e..4bd318448 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -116,19 +116,19 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const bool const need_pre = (dev_tree.hub_addr && dev_tree.speed == TUSB_SPEED_LOW); rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_open(rhport, dev_addr, (uint8_t const*) desc_ep, need_pre); + return pio_usb_host_endpoint_open(rhport, dev_addr, (uint8_t const*) desc_ep, need_pre); } bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_transfer(rhport, dev_addr, ep_addr, buffer, buflen); + return pio_usb_host_endpoint_transfer(rhport, dev_addr, ep_addr, buffer, buflen); } bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { rhport = RHPORT_PIO(rhport); - return pio_usb_endpoint_send_setup(rhport, dev_addr, setup_packet); + return pio_usb_host_send_setup(rhport, dev_addr, setup_packet); } //bool hcd_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) @@ -153,7 +153,7 @@ bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) return true; } -void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port, uint32_t flag) +static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port, uint32_t flag) { volatile uint32_t* ep_reg; xfer_result_t result; @@ -200,37 +200,35 @@ void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_t* port void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) { pio_hw_root_port_t* port = PIO_USB_HW_RPORT(root_id); + uint32_t const ints = port->ints; - if ( port->ints & PIO_USB_INTS_CONNECT_BITS ) + if ( ints & PIO_USB_INTS_CONNECT_BITS ) { - port->ints &= ~PIO_USB_INTS_CONNECT_BITS; - hcd_event_device_attach(root_id+1, true); } - if ( port->ints & PIO_USB_INTS_DISCONNECT_BITS ) + if ( ints & PIO_USB_INTS_DISCONNECT_BITS ) { - port->ints &= ~PIO_USB_INTS_DISCONNECT_BITS; hcd_event_device_remove(root_id+1, true); } - if ( port->ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) + if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) { - port->ints &= ~PIO_USB_INTS_ENDPOINT_COMPLETE_BITS; handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_COMPLETE_BITS); } - if ( port->ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) + if ( ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) { - port->ints &= ~PIO_USB_INTS_ENDPOINT_ERROR_BITS; handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_ERROR_BITS); } - if ( port->ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) + if ( ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) { - port->ints &= ~PIO_USB_INTS_ENDPOINT_STALLED_BITS; handle_endpoint_irq(port, PIO_USB_INTS_ENDPOINT_STALLED_BITS); } + + // clear all + port->ints &= ~ints; } #endif -- cgit v1.3.1 From 12debd7763bfc6f55566e5f4f8c982a55f206815 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Apr 2022 01:06:17 +0700 Subject: keep up with pio usb --- hw/bsp/rp2040/family.cmake | 1 - lib/Pico-PIO-USB | 2 +- src/common/tusb_debug.h | 4 ++++ src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 10 +++++----- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 4 ++-- 5 files changed, 12 insertions(+), 9 deletions(-) (limited to 'hw') diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index d872c35ea..70e18293f 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -32,7 +32,6 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/lib/Pico-PIO-USB/pio_usb.c ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c ${TOP}/lib/Pico-PIO-USB/pio_usb_device.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_hw.c ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) diff --git a/lib/Pico-PIO-USB b/lib/Pico-PIO-USB index d15fffd95..f656d703f 160000 --- a/lib/Pico-PIO-USB +++ b/lib/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit d15fffd950018c60cba5c98d676a4fafaeea2648 +Subproject commit f656d703f3cee1e589eebb6606e204f59afb5611 diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 647e8a8db..1ea2c19f5 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -65,6 +65,7 @@ static inline void tu_print_var(uint8_t const* buf, uint32_t bufsize) // Log with Level #define TU_LOG(n, ...) TU_XSTRCAT(TU_LOG, n)(__VA_ARGS__) #define TU_LOG_MEM(n, ...) TU_XSTRCAT3(TU_LOG, n, _MEM)(__VA_ARGS__) +#define TU_LOG_ARR(n, ...) TU_XSTRCAT3(TU_LOG, n, _ARR)(__VA_ARGS__) #define TU_LOG_VAR(n, ...) TU_XSTRCAT3(TU_LOG, n, _VAR)(__VA_ARGS__) #define TU_LOG_INT(n, ...) TU_XSTRCAT3(TU_LOG, n, _INT)(__VA_ARGS__) #define TU_LOG_HEX(n, ...) TU_XSTRCAT3(TU_LOG, n, _HEX)(__VA_ARGS__) @@ -74,6 +75,7 @@ static inline void tu_print_var(uint8_t const* buf, uint32_t bufsize) // Log Level 1: Error #define TU_LOG1 tu_printf #define TU_LOG1_MEM tu_print_mem +#define TU_LOG1_ARR(_x, _n) tu_print_var((uint8_t const*)(_x), _n) #define TU_LOG1_VAR(_x) tu_print_var((uint8_t const*)(_x), sizeof(*(_x))) #define TU_LOG1_INT(_x) tu_printf(#_x " = %ld\r\n", (unsigned long) (_x) ) #define TU_LOG1_HEX(_x) tu_printf(#_x " = %lX\r\n", (unsigned long) (_x) ) @@ -82,6 +84,7 @@ static inline void tu_print_var(uint8_t const* buf, uint32_t bufsize) #if CFG_TUSB_DEBUG >= 2 #define TU_LOG2 TU_LOG1 #define TU_LOG2_MEM TU_LOG1_MEM + #define TU_LOG2_ARR TU_LOG1_ARR #define TU_LOG2_VAR TU_LOG1_VAR #define TU_LOG2_INT TU_LOG1_INT #define TU_LOG2_HEX TU_LOG1_HEX @@ -91,6 +94,7 @@ static inline void tu_print_var(uint8_t const* buf, uint32_t bufsize) #if CFG_TUSB_DEBUG >= 3 #define TU_LOG3 TU_LOG1 #define TU_LOG3_MEM TU_LOG1_MEM + #define TU_LOG3_ARR TU_LOG1_ARR #define TU_LOG3_VAR TU_LOG1_VAR #define TU_LOG3_INT TU_LOG1_INT #define TU_LOG3_HEX TU_LOG1_HEX diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 38867ea1c..1cb850654 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -119,8 +119,8 @@ void dcd_edpt_close_all (uint8_t rhport) bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { (void) rhport; - pio_hw_endpoint_t *ep = pio_usb_device_get_ep(ep_addr); - return pio_usb_endpoint_transfer(ep, buffer, total_bytes); + endpoint_t *ep = pio_usb_device_get_ep(ep_addr); + return pio_usb_ll_endpoint_transfer(ep, buffer, total_bytes); } // Submit a transfer where is managed by FIFO, When complete dcd_event_xfer_complete() is invoked to notify the stack - optional, however, must be listed in usbd.c @@ -137,7 +137,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) { (void) rhport; - pio_hw_endpoint_t *ep = pio_usb_device_get_ep(ep_addr); + endpoint_t *ep = pio_usb_device_get_ep(ep_addr); ep->stalled = true; } @@ -145,7 +145,7 @@ void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) { (void) rhport; - pio_hw_endpoint_t *ep = pio_usb_device_get_ep(ep_addr); + endpoint_t *ep = pio_usb_device_get_ep(ep_addr); ep->data_id = 0; ep->stalled = false; } @@ -188,7 +188,7 @@ static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_ if (ep_all & mask) { - pio_hw_endpoint_t* ep = PIO_USB_HW_EP(ep_idx); + endpoint_t* ep = PIO_USB_HW_EP(ep_idx); uint8_t const tu_rhport = port - PIO_USB_HW_RPORT(0) + 1; dcd_event_xfer_complete(tu_rhport, ep->ep_num, ep->actual_len, result, true); } diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index e311f16d0..2615b2356 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -73,7 +73,7 @@ bool hcd_port_connect_status(uint8_t rhport) rhport = RHPORT_PIO(rhport); pio_hw_root_port_t *root = PIO_USB_HW_RPORT(rhport); - port_pin_status_t line_state = pio_hw_get_line_state(root); + port_pin_status_t line_state = pio_usb_ll_get_line_state(root); return line_state != PORT_PIN_SE0; } @@ -187,7 +187,7 @@ static void __no_inline_not_in_flash_func(handle_endpoint_irq)(pio_hw_root_port_ if (ep_all & mask) { - pio_hw_endpoint_t* ep = PIO_USB_HW_EP(ep_idx); + endpoint_t* ep = PIO_USB_HW_EP(ep_idx); hcd_event_xfer_complete(ep->dev_addr, ep->ep_num, ep->actual_len, result, true); } } -- cgit v1.3.1 From 4a661dead0899cb154325a8257d19281f2536af3 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Apr 2022 17:57:52 +0700 Subject: add TU_ATTR_FAST_FUNC for rp2040 __not_in_flash() section --- examples/device/hid_boot_interface/src/main.c | 2 -- hw/bsp/rp2040/family.cmake | 2 +- src/common/tusb_mcu.h | 7 +++++++ src/device/usbd.c | 3 ++- 4 files changed, 10 insertions(+), 4 deletions(-) (limited to 'hw') diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 031b17a2e..e5e2f6856 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -31,8 +31,6 @@ #include "tusb.h" #include "usb_descriptors.h" -#include "pio_usb.h" - //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 70e18293f..bb146d085 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -47,7 +47,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) hardware_irq hardware_resets pico_sync - # for usb-pio + # for usb-pio hardware_dma hardware_pio pico_multicore diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 8eb4ad475..c1cf2a810 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -228,6 +228,8 @@ #elif TU_CHECK_MCU(OPT_MCU_RP2040) #define TUP_DCD_ENDPOINT_MAX 16 + #define TU_ATTR_FAST_FUNC __attribute__((section(".time_critical.tinyusb"))) + //------------- Silabs -------------// #elif TU_CHECK_MCU(OPT_MCU_EFM32GG) #define TUP_USBIP_DWC2 @@ -282,4 +284,9 @@ #define TUP_RHPORT_HIGHSPEED 0x00 #endif +// fast function, normally mean placing function in SRAM +#ifndef TU_ATTR_FAST_FUNC + #define TU_ATTR_FAST_FUNC +#endif + #endif diff --git a/src/device/usbd.c b/src/device/usbd.c index 12b4071af..4c2cd3abd 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1071,7 +1071,8 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const //--------------------------------------------------------------------+ // DCD Event Handler //--------------------------------------------------------------------+ -void __no_inline_not_in_flash_func(dcd_event_handler)(dcd_event_t const * event, bool in_isr) +TU_ATTR_FAST_FUNC +void dcd_event_handler(dcd_event_t const * event, bool in_isr) { switch (event->event_id) { -- cgit v1.3.1 From 0b30a10ab3c2f1fdcf4fae8f530c80bf5cffaf96 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 29 Apr 2022 22:24:36 +0700 Subject: configure hid_to_cdc example to build with rp2040 with pio usb as host --- examples/host/hid_to_cdc/CMakeLists.txt | 3 +- examples/host/hid_to_cdc/only.txt | 1 + examples/host/hid_to_cdc/src/main.c | 201 +++++++++++++---------------- examples/host/hid_to_cdc/src/tusb_config.h | 12 +- hw/bsp/rp2040/family.cmake | 56 ++++++-- lib/Pico-PIO-USB | 2 +- src/host/usbh.c | 2 +- 7 files changed, 142 insertions(+), 135 deletions(-) (limited to 'hw') diff --git a/examples/host/hid_to_cdc/CMakeLists.txt b/examples/host/hid_to_cdc/CMakeLists.txt index abc4d91da..ff9f58c4c 100644 --- a/examples/host/hid_to_cdc/CMakeLists.txt +++ b/examples/host/hid_to_cdc/CMakeLists.txt @@ -25,4 +25,5 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) +family_configure_host_example(${PROJECT}) diff --git a/examples/host/hid_to_cdc/only.txt b/examples/host/hid_to_cdc/only.txt index 78d94e3ce..6ee8e3fde 100644 --- a/examples/host/hid_to_cdc/only.txt +++ b/examples/host/hid_to_cdc/only.txt @@ -1,2 +1,3 @@ board:mimxrt1060_evk board:mimxrt1064_evk +mcu:RP2040 diff --git a/examples/host/hid_to_cdc/src/main.c b/examples/host/hid_to_cdc/src/main.c index cdf5d264e..f0e78887b 100644 --- a/examples/host/hid_to_cdc/src/main.c +++ b/examples/host/hid_to_cdc/src/main.c @@ -73,12 +73,14 @@ enum { static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; void led_blinking_task(void); -void cdc_task(void); /*------------- MAIN -------------*/ int main(void) { board_init(); + + printf("TinyUSB Host HID <-> Device CDC Example\r\n"); + tusb_init(); while (1) @@ -86,15 +88,13 @@ int main(void) tud_task(); // tinyusb device task tuh_task(); // tinyusb host task led_blinking_task(); - - cdc_task(); } return 0; } //--------------------------------------------------------------------+ -// Device callbacks +// Device CDC //--------------------------------------------------------------------+ // Invoked when device is mounted @@ -124,8 +124,20 @@ void tud_resume_cb(void) blink_interval_ms = BLINK_MOUNTED; } +// Invoked when CDC interface received data from host +void tud_cdc_rx_cb(uint8_t itf) +{ + (void) itf; + + char buf[64]; + uint32_t count = tud_cdc_read(buf, sizeof(buf)); + + // TODO control LED on keyboard of host stack + (void) count; +} + //--------------------------------------------------------------------+ -// Host callbacks +// Host HID //--------------------------------------------------------------------+ // Invoked when device with hid interface is mounted @@ -137,169 +149,138 @@ void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_re { (void)desc_report; (void)desc_len; + + // Interface protocol (hid_interface_protocol_enum_t) + const char* protocol_str[] = { "None", "Keyboard", "Mouse" }; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); + uint16_t vid, pid; tuh_vid_pid_get(dev_addr, &vid, &pid); - printf("HID device address = %d, instance = %d is mounted\r\n", dev_addr, instance); - printf("VID = %04x, PID = %04x\r\n", vid, pid); + printf("[%04x:%04x][%u] HID Interface instance = %d, Protocol = %s\r\n", vid, pid, dev_addr, instance, protocol_str[itf_protocol]); - // Receive any report and treat it like a keyboard. + // Receive report from boot keyboard & mouse only // tuh_hid_report_received_cb() will be invoked when report is available - if ( !tuh_hid_receive_report(dev_addr, instance) ) + if (itf_protocol == HID_ITF_PROTOCOL_KEYBOARD || itf_protocol == HID_ITF_PROTOCOL_MOUSE) { - printf("Error: cannot request to receive report\r\n"); + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request report\r\n"); + } } } // Invoked when device with hid interface is un-mounted void tuh_hid_umount_cb(uint8_t dev_addr, uint8_t instance) { - printf("HID device address = %d, instance = %d is unmounted\r\n", dev_addr, instance); + printf("[%u] HID Interface instance = %d is unmounted\r\n", dev_addr, instance); } // keycodes from last report to check if key is holding or newly pressed uint8_t last_keycodes[6] = {0}; // look up new key in previous keys -static inline bool key_in_last_report(const uint8_t key_arr[6], uint8_t keycode) +static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) { for(uint8_t i=0; i<6; i++) { - if (key_arr[i] == keycode) return true; + if (report->keycode[i] == keycode) return true; } return false; } -// Invoked when received report from device via interrupt endpoint -void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) -{ - if (len != 8) - { - char ch_num; - - tud_cdc_write_str("incorrect report len: "); - - if ( len > 10 ) - { - ch_num = '0' + (len / 10); - tud_cdc_write(&ch_num, 1); - len = len % 10; - } - ch_num = '0' + len; - tud_cdc_write(&ch_num, 1); - - tud_cdc_write_str("\r\n"); - tud_cdc_write_flush(); - - // Don't request a new report for a wrong sized endpoint. - return; - } - - uint8_t const modifiers = report[0]; +// convert hid keycode to ascii and print via usb device CDC (ignore non-printable) +static void process_kbd_report(hid_keyboard_report_t const *report) +{ + static hid_keyboard_report_t prev_report = { 0, 0, {0} }; // previous report to check key released bool flush = false; - for (int i = 2; i < 8; i++) + for(uint8_t i=0; i<6; i++) { - uint8_t keycode = report[i]; - - if (keycode) + uint8_t keycode = report->keycode[i]; + if ( keycode ) { - if ( key_in_last_report(last_keycodes, keycode) ) + if ( find_key_in_report(&prev_report, keycode) ) { // exist in previous report means the current key is holding - // do nothing }else { // not existed in previous report means the current key is pressed - // Only print keycodes 0 - 128. - if (keycode < 128) + + // remap the key code for Colemak layout + #ifdef KEYBOARD_COLEMAK + uint8_t colemak_key_code = colemak[keycode]; + if (colemak_key_code != 0) keycode = colemak_key_code; + #endif + + bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); + uint8_t ch = keycode2ascii[keycode][is_shift ? 1 : 0]; + + if (ch) { - // remap the key code for Colemak layout so @tannewt can type. - #ifdef KEYBOARD_COLEMAK - uint8_t colemak_key_code = colemak[keycode]; - if (colemak_key_code != 0) keycode = colemak_key_code; - #endif - - bool const is_shift = modifiers & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); - char c = keycode2ascii[keycode][is_shift ? 1 : 0]; - if (c) - { - if (c == '\n') tud_cdc_write("\r", 1); - tud_cdc_write(&c, 1); - flush = true; - } + if (ch == '\n') tud_cdc_write("\r", 1); + tud_cdc_write(&ch, 1); + flush = true; } } } + // TODO example skips key released } if (flush) tud_cdc_write_flush(); - // save current report - memcpy(last_keycodes, report+2, 6); - - // continue to request to receive report - if ( !tuh_hid_receive_report(dev_addr, instance) ) - { - printf("Error: cannot request to receive report\r\n"); - } + prev_report = *report; } +// send mouse report to usb device CDC +static void process_mouse_report(hid_mouse_report_t const * report) +{ + static hid_mouse_report_t prev_report = { 0 }; + + char tempbuf[32]; + int count; + //------------- button state -------------// + //uint8_t button_changed_mask = report->buttons ^ prev_report.buttons; + char l = report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-'; + char m = report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-'; + char r = report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'; -//--------------------------------------------------------------------+ -// USB CDC -//--------------------------------------------------------------------+ -void cdc_task(void) -{ - // connected() check for DTR bit - // Most but not all terminal client set this when making connection - // if ( tud_cdc_connected() ) - { - // connected and there are data available - if ( tud_cdc_available() ) - { - // read datas - char buf[64]; - uint32_t count = tud_cdc_read(buf, sizeof(buf)); - (void) count; - - // Echo back - // Note: Skip echo by commenting out write() and write_flush() - // for throughput test e.g - // $ dd if=/dev/zero of=/dev/ttyACM0 count=10000 - tud_cdc_write(buf, count); - tud_cdc_write_flush(); - } - } + count = sprintf(tempbuf, " %c%c%c %d %d %d\r\n", l, m, r, report->x, report->y, report->wheel); + + tud_cdc_write(tempbuf, count); + tud_cdc_write_flush(); } -// Invoked when cdc when line state changed e.g connected/disconnected -void tud_cdc_line_state_cb(uint8_t itf, bool dtr, bool rts) +// Invoked when received report from device via interrupt endpoint +void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len) { - (void) itf; - (void) rts; + uint8_t const itf_protocol = tuh_hid_interface_protocol(dev_addr, instance); - // TODO set some indicator - if ( dtr ) + switch(itf_protocol) { - // Terminal connected - }else - { - // Terminal disconnected + case HID_ITF_PROTOCOL_KEYBOARD: + process_kbd_report( (hid_keyboard_report_t const*) report ); + break; + + case HID_ITF_PROTOCOL_MOUSE: + process_mouse_report( (hid_mouse_report_t const*) report ); + break; + + default: break; } -} -// Invoked when CDC interface received data from host -void tud_cdc_rx_cb(uint8_t itf) -{ - (void) itf; + // continue to request to receive report + if ( !tuh_hid_receive_report(dev_addr, instance) ) + { + printf("Error: cannot request report\r\n"); + } } //--------------------------------------------------------------------+ -// BLINKING TASK +// Blinking Task //--------------------------------------------------------------------+ void led_blinking_task(void) { diff --git a/examples/host/hid_to_cdc/src/tusb_config.h b/examples/host/hid_to_cdc/src/tusb_config.h index 9a35ffc30..0fa4899a9 100644 --- a/examples/host/hid_to_cdc/src/tusb_config.h +++ b/examples/host/hid_to_cdc/src/tusb_config.h @@ -49,6 +49,9 @@ #define BOARD_HOST_RHPORT_NUM 1 #endif +// Use raspberry pio-usb for host +#define CFG_TUH_RPI_PIO_USB 1 + // RHPort max operational speed can defined by board.mk // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed #ifndef BOARD_DEVICE_RHPORT_SPEED @@ -124,10 +127,6 @@ //------------- CLASS -------------// #define CFG_TUD_CDC 1 -#define CFG_TUD_MSC 0 -#define CFG_TUD_HID 0 -#define CFG_TUD_MIDI 0 -#define CFG_TUD_VENDOR 0 // CDC FIFO size of TX and RX #define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) @@ -144,14 +143,9 @@ #define CFG_TUH_ENUMERATION_BUFSIZE 256 #define CFG_TUH_HUB 1 -#define CFG_TUH_CDC 0 -#define CFG_TUH_MSC 0 -#define CFG_TUH_VENDOR 0 - // max device support (excluding hub device) #define CFG_TUH_DEVICE_MAX (CFG_TUH_HUB ? 4 : 1) // hub typically has 4 ports -//------------- HID -------------// #define CFG_TUH_HID 4 #define CFG_TUH_HID_EPIN_BUFSIZE 64 #define CFG_TUH_HID_EPOUT_BUFSIZE 64 diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index bb146d085..c3ea077bb 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -23,23 +23,20 @@ if (NOT TARGET _rp2040_family_inclusion_marker) set(PICO_TINYUSB_PATH ${TOP}) endif() + #------------------------------------ # Base config for both device and host; wrapped by SDK's tinyusb_common + #------------------------------------ add_library(tinyusb_common_base INTERFACE) - + target_sources(tinyusb_common_base INTERFACE ${TOP}/src/tusb.c ${TOP}/src/common/tusb_fifo.c - ${TOP}/lib/Pico-PIO-USB/pio_usb.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_device.c - ${TOP}/lib/Pico-PIO-USB/usb_crc.c ) target_include_directories(tinyusb_common_base INTERFACE ${TOP}/src ${TOP}/src/common ${TOP}/hw - ${TOP}/lib/Pico-PIO-USB ) target_link_libraries(tinyusb_common_base INTERFACE @@ -47,10 +44,6 @@ if (NOT TARGET _rp2040_family_inclusion_marker) hardware_irq hardware_resets pico_sync - # for usb-pio - hardware_dma - hardware_pio - pico_multicore ) set(TINYUSB_DEBUG_LEVEL 0) @@ -65,7 +58,35 @@ if (NOT TARGET _rp2040_family_inclusion_marker) CFG_TUSB_DEBUG=${TINYUSB_DEBUG_LEVEL} ) + #------------------------------------ + # PIO USB for both host and device + #------------------------------------ + add_library(tinyusb_pio_usb_base INTERFACE) + + target_sources(tinyusb_pio_usb_base INTERFACE + ${TOP}/lib/Pico-PIO-USB/pio_usb.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c + ${TOP}/lib/Pico-PIO-USB/pio_usb_device.c + ${TOP}/lib/Pico-PIO-USB/usb_crc.c + ) + + target_include_directories(tinyusb_pio_usb_base INTERFACE + ${TOP}/lib/Pico-PIO-USB + ) + + target_link_libraries(tinyusb_pio_usb_base INTERFACE + hardware_dma + hardware_pio + pico_multicore + ) + + target_compile_definitions(tinyusb_pio_usb_base INTERFACE + PIO_USB_USE_TINYUSB + ) + + #------------------------------------ # Base config for device mode; wrapped by SDK's tinyusb_device + #------------------------------------ add_library(tinyusb_device_base INTERFACE) target_sources(tinyusb_device_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -87,7 +108,9 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ${TOP}/src/class/video/video_device.c ) + #------------------------------------ # Base config for host mode; wrapped by SDK's tinyusb_host + #------------------------------------ add_library(tinyusb_host_base INTERFACE) target_sources(tinyusb_host_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -105,7 +128,10 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_compile_definitions(tinyusb_host_base INTERFACE RP2040_USB_HOST_MODE=1 ) - + + #------------------------------------ + # BSP & Additions + #------------------------------------ add_library(tinyusb_bsp INTERFACE) target_sources(tinyusb_bsp INTERFACE ${TOP}/hw/bsp/rp2040/family.c @@ -139,6 +165,10 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ) endif() + #------------------------------------ + # Functions + #------------------------------------ + function(family_configure_target TARGET) pico_add_extra_outputs(${TARGET}) pico_enable_stdio_uart(${TARGET} 1) @@ -147,12 +177,12 @@ if (NOT TARGET _rp2040_family_inclusion_marker) function(family_configure_device_example TARGET) family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_pio_usb_base) endfunction() function(family_configure_host_example TARGET) family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host tinyusb_pio_usb_base) endfunction() function(family_initialize_project PROJECT DIR) diff --git a/lib/Pico-PIO-USB b/lib/Pico-PIO-USB index 7e147ad44..1ab409f13 160000 --- a/lib/Pico-PIO-USB +++ b/lib/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit 7e147ad44dbd5038590449418b26fb867024db6c +Subproject commit 1ab409f13bd888b8f1f7c9bf3bd7269d1ccc1c79 diff --git a/src/host/usbh.c b/src/host/usbh.c index 74ffb5c38..e0e41a8d1 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -630,7 +630,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result if (XFER_RESULT_SUCCESS != result) { - TU_LOG2("[%u:%u] Control %s\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED"); + TU_LOG1("[%u:%u] Control %s\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED"); // terminate transfer if any stage failed _xfer_complete(dev_addr, result); -- cgit v1.3.1 From f19d913b5d67ecf1b4f4d84c9d9a5880376f5a21 Mon Sep 17 00:00:00 2001 From: caleb crome Date: Thu, 5 May 2022 14:36:02 -0700 Subject: set irq priority for freertos --- hw/bsp/imxrt/family.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'hw') diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index a811a7e40..8d34d4b9f 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -51,7 +51,10 @@ void board_init(void) SysTick_Config(SystemCoreClock / 1000); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) -// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB_OTG1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#ifdef USB_OTG2_IRQn + NVIC_SetPriority(USB_OTG2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif #endif // LED -- cgit v1.3.1 From 26ee62222290abf016ff4eb801d1289e05e595a1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 May 2022 12:51:48 +0700 Subject: move pio usb files to src --- hw/bsp/rp2040/family.cmake | 14 +++++++------- lib/Pico-PIO-USB | 2 +- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'hw') diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index c3ea077bb..f51976d39 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -64,14 +64,14 @@ if (NOT TARGET _rp2040_family_inclusion_marker) add_library(tinyusb_pio_usb_base INTERFACE) target_sources(tinyusb_pio_usb_base INTERFACE - ${TOP}/lib/Pico-PIO-USB/pio_usb.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_host.c - ${TOP}/lib/Pico-PIO-USB/pio_usb_device.c - ${TOP}/lib/Pico-PIO-USB/usb_crc.c + ${TOP}/lib/Pico-PIO-USB/src/pio_usb.c + ${TOP}/lib/Pico-PIO-USB/src/pio_usb_host.c + ${TOP}/lib/Pico-PIO-USB/src/pio_usb_device.c + ${TOP}/lib/Pico-PIO-USB/src/usb_crc.c ) target_include_directories(tinyusb_pio_usb_base INTERFACE - ${TOP}/lib/Pico-PIO-USB + ${TOP}/lib/Pico-PIO-USB/src ) target_link_libraries(tinyusb_pio_usb_base INTERFACE @@ -190,8 +190,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) _family_initialize_project(${PROJECT} ${DIR}) enable_language(C CXX ASM) pico_sdk_init() - pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/usb_tx.pio) - pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/usb_rx.pio) + pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_tx.pio) + pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_rx.pio) endfunction() # This method must be called from the project scope to suppress known warnings in TinyUSB source files diff --git a/lib/Pico-PIO-USB b/lib/Pico-PIO-USB index 1ab409f13..d2c6c4592 160000 --- a/lib/Pico-PIO-USB +++ b/lib/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit 1ab409f13bd888b8f1f7c9bf3bd7269d1ccc1c79 +Subproject commit d2c6c459277816466cc087a5e27f41d2ce257f46 -- cgit v1.3.1 From 717a47412548923123141503749f721184222cf0 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 May 2022 21:56:47 +0700 Subject: move pio-usb init to family_configure_pio_usb_example() to stay compatible --- examples/dual/host_hid_to_device_cdc/CMakeLists.txt | 1 + examples/host/bare_api/CMakeLists.txt | 5 ++++- examples/host/cdc_msc_hid/CMakeLists.txt | 3 +++ examples/host/hid_controller/CMakeLists.txt | 5 ++++- hw/bsp/rp2040/family.cmake | 13 +++++++++---- 5 files changed, 21 insertions(+), 6 deletions(-) (limited to 'hw') diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index ff9f58c4c..bf3e042d1 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -27,3 +27,4 @@ target_include_directories(${PROJECT} PUBLIC # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) family_configure_host_example(${PROJECT}) +family_configure_pio_usb_example(${PROJECT}) diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index bff281a8c..e2e8d4fd5 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -24,4 +24,7 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT}) \ No newline at end of file +family_configure_host_example(${PROJECT}) + +# For rp2040, un-comment to enable pico-pio-usb +# family_configure_pio_usb_example(${PROJECT}) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index 95c07339e..ca0f8e48a 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -27,3 +27,6 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT}) + +# For rp2040, un-comment to enable pico-pio-usb +# family_configure_pio_usb_example(${PROJECT}) diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index aaf8bc34f..60678fc1c 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -25,4 +25,7 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_host_example(${PROJECT}) \ No newline at end of file +family_configure_host_example(${PROJECT}) + +# For rp2040, un-comment to enable pico-pio-usb +# family_configure_pio_usb_example(${PROJECT}) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index f51976d39..06ca74988 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -177,12 +177,19 @@ if (NOT TARGET _rp2040_family_inclusion_marker) function(family_configure_device_example TARGET) family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_pio_usb_base) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device) endfunction() function(family_configure_host_example TARGET) family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host tinyusb_pio_usb_base) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) + endfunction() + + function(family_configure_pio_usb_example TARGET) + family_configure_target(${TARGET}) + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_pio_usb_base) + pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_tx.pio) + pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_rx.pio) endfunction() function(family_initialize_project PROJECT DIR) @@ -190,8 +197,6 @@ if (NOT TARGET _rp2040_family_inclusion_marker) _family_initialize_project(${PROJECT} ${DIR}) enable_language(C CXX ASM) pico_sdk_init() - pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_tx.pio) - pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_rx.pio) endfunction() # This method must be called from the project scope to suppress known warnings in TinyUSB source files -- cgit v1.3.1 From 35b77a4a81b62da0558630a7148fb3934faa4391 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 May 2022 22:14:00 +0700 Subject: cmake lib rename --- examples/dual/host_hid_to_device_cdc/CMakeLists.txt | 2 +- examples/host/bare_api/CMakeLists.txt | 2 +- examples/host/cdc_msc_hid/CMakeLists.txt | 2 +- examples/host/hid_controller/CMakeLists.txt | 2 +- hw/bsp/rp2040/family.cmake | 14 +++++++------- 5 files changed, 11 insertions(+), 11 deletions(-) (limited to 'hw') diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index bf3e042d1..24ebfdec3 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -27,4 +27,4 @@ target_include_directories(${PROJECT} PUBLIC # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) family_configure_host_example(${PROJECT}) -family_configure_pio_usb_example(${PROJECT}) +family_configure_pico_pio_usb_example(${PROJECT}) diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index e2e8d4fd5..607ef22eb 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -27,4 +27,4 @@ target_include_directories(${PROJECT} PUBLIC family_configure_host_example(${PROJECT}) # For rp2040, un-comment to enable pico-pio-usb -# family_configure_pio_usb_example(${PROJECT}) +# family_configure_pico_pio_usb_example(${PROJECT}) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index ca0f8e48a..214e9f2e7 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -29,4 +29,4 @@ target_include_directories(${PROJECT} PUBLIC family_configure_host_example(${PROJECT}) # For rp2040, un-comment to enable pico-pio-usb -# family_configure_pio_usb_example(${PROJECT}) +# family_configure_pico_pio_usb_example(${PROJECT}) diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index 60678fc1c..6227e0790 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -28,4 +28,4 @@ target_include_directories(${PROJECT} PUBLIC family_configure_host_example(${PROJECT}) # For rp2040, un-comment to enable pico-pio-usb -# family_configure_pio_usb_example(${PROJECT}) +# family_configure_pico_pio_usb_example(${PROJECT}) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 06ca74988..f52274c15 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -61,26 +61,26 @@ if (NOT TARGET _rp2040_family_inclusion_marker) #------------------------------------ # PIO USB for both host and device #------------------------------------ - add_library(tinyusb_pio_usb_base INTERFACE) + add_library(pico_pio_usb INTERFACE) - target_sources(tinyusb_pio_usb_base INTERFACE + target_sources(pico_pio_usb INTERFACE ${TOP}/lib/Pico-PIO-USB/src/pio_usb.c ${TOP}/lib/Pico-PIO-USB/src/pio_usb_host.c ${TOP}/lib/Pico-PIO-USB/src/pio_usb_device.c ${TOP}/lib/Pico-PIO-USB/src/usb_crc.c ) - target_include_directories(tinyusb_pio_usb_base INTERFACE + target_include_directories(pico_pio_usb INTERFACE ${TOP}/lib/Pico-PIO-USB/src ) - target_link_libraries(tinyusb_pio_usb_base INTERFACE + target_link_libraries(pico_pio_usb INTERFACE hardware_dma hardware_pio pico_multicore ) - target_compile_definitions(tinyusb_pio_usb_base INTERFACE + target_compile_definitions(pico_pio_usb INTERFACE PIO_USB_USE_TINYUSB ) @@ -185,9 +185,9 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) endfunction() - function(family_configure_pio_usb_example TARGET) + function(family_configure_pico_pio_usb_example TARGET) family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_pio_usb_base) + target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_pio_usb) pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_tx.pio) pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_rx.pio) endfunction() -- cgit v1.3.1 From 4586d8f119f779d1ef5f937e5c79e0ea2c84579c Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 16 May 2022 13:44:06 +0700 Subject: add upstream Pico-PIO-USB --- .github/workflows/build_arm.yml | 2 +- .gitmodules | 3 +++ hw/bsp/rp2040/family.cmake | 18 +++++++++++------- hw/mcu/raspberry_pi/Pico-PIO-USB | 1 + 4 files changed, 16 insertions(+), 8 deletions(-) create mode 160000 hw/mcu/raspberry_pi/Pico-PIO-USB (limited to 'hw') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 085274eb5..bec879a93 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -82,7 +82,7 @@ jobs: run: | git clone --depth 1 -b develop https://github.com/raspberrypi/pico-sdk ~/pico-sdk echo >> $GITHUB_ENV PICO_SDK_PATH=~/pico-sdk - git submodule update --init lib/Pico-PIO-USB + git submodule update --init hw/mcu/raspberry_pi/Pico-PIO-USB - name: Set Toolchain URL run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v10.2.1-1.1/xpack-arm-none-eabi-gcc-10.2.1-1.1-linux-x64.tar.gz diff --git a/.gitmodules b/.gitmodules index 21bbf08c0..044ac24ec 100644 --- a/.gitmodules +++ b/.gitmodules @@ -146,3 +146,6 @@ [submodule "hw/mcu/allwinner"] path = hw/mcu/allwinner url = https://github.com/hathach/allwinner_driver.git +[submodule "hw/mcu/raspberry_pi/Pico-PIO-USB"] + path = hw/mcu/raspberry_pi/Pico-PIO-USB + url = https://github.com/sekigon-gonnoc/Pico-PIO-USB.git diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index f52274c15..17ae3de9b 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -63,15 +63,19 @@ if (NOT TARGET _rp2040_family_inclusion_marker) #------------------------------------ add_library(pico_pio_usb INTERFACE) + if (NOT DEFINED PICO_PIO_USB_PATH) + set(PICO_PIO_USB_PATH "${TOP}/hw/mcu/raspberry_pi/Pico-PIO-USB") + endif() + target_sources(pico_pio_usb INTERFACE - ${TOP}/lib/Pico-PIO-USB/src/pio_usb.c - ${TOP}/lib/Pico-PIO-USB/src/pio_usb_host.c - ${TOP}/lib/Pico-PIO-USB/src/pio_usb_device.c - ${TOP}/lib/Pico-PIO-USB/src/usb_crc.c + ${PICO_PIO_USB_PATH}/src/pio_usb.c + ${PICO_PIO_USB_PATH}/src/pio_usb_host.c + ${PICO_PIO_USB_PATH}/src/pio_usb_device.c + ${PICO_PIO_USB_PATH}/src/usb_crc.c ) target_include_directories(pico_pio_usb INTERFACE - ${TOP}/lib/Pico-PIO-USB/src + ${PICO_PIO_USB_PATH}/src ) target_link_libraries(pico_pio_usb INTERFACE @@ -188,8 +192,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) function(family_configure_pico_pio_usb_example TARGET) family_configure_target(${TARGET}) target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_pio_usb) - pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_tx.pio) - pico_generate_pio_header(tinyusb_common_base ${TOP}/lib/Pico-PIO-USB/src/usb_rx.pio) + pico_generate_pio_header(tinyusb_common_base ${PICO_PIO_USB_PATH}/src/usb_tx.pio) + pico_generate_pio_header(tinyusb_common_base ${PICO_PIO_USB_PATH}/src/usb_rx.pio) endfunction() function(family_initialize_project PROJECT DIR) diff --git a/hw/mcu/raspberry_pi/Pico-PIO-USB b/hw/mcu/raspberry_pi/Pico-PIO-USB new file mode 160000 index 000000000..2a9fefd6c --- /dev/null +++ b/hw/mcu/raspberry_pi/Pico-PIO-USB @@ -0,0 +1 @@ +Subproject commit 2a9fefd6ccf42e5d8570ae83fdc54c9c875ebdd1 -- cgit v1.3.1 From 26c4d4b328ca93d0db5d8d7842a315cbde4d9f5a Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Fri, 20 May 2022 17:25:30 -0500 Subject: Minor cleanup of RP2040 code post addition of Pico-PIO_USB * Removed some compiler warnings, and cleaned out unnecessary warning suppression from CMake suppress_tinyusb_warnings() * Made explicit family_configure_dual_usb_example() for DUAL mode examples as family_configure_target() may not generally be called multiple times for the same target * Renamed library pico_pio_usb to tinyusb_picio_pio_usb to be clearer and avoid conflict if someone already has a pico_pio_usb in their project * Added family_add_pico_pio_usb() method for adding Pico-PIO_SUB support to an existing example * Allowed tinyusb_pico_pio_usb to be added to regular apps using the Pico SDK --- examples/device/net_lwip_webserver/src/lwipopts.h | 2 + examples/dual/CMakeLists.txt | 12 ++ .../dual/host_hid_to_device_cdc/CMakeLists.txt | 4 +- examples/host/bare_api/CMakeLists.txt | 2 +- examples/host/cdc_msc_hid/CMakeLists.txt | 2 +- examples/host/hid_controller/CMakeLists.txt | 2 +- hw/bsp/rp2040/family.c | 2 + hw/bsp/rp2040/family.cmake | 156 +++++++++++---------- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 4 + src/portable/raspberrypi/rp2040/rp2040_usb.c | 2 +- 10 files changed, 107 insertions(+), 81 deletions(-) create mode 100644 examples/dual/CMakeLists.txt (limited to 'hw') diff --git a/examples/device/net_lwip_webserver/src/lwipopts.h b/examples/device/net_lwip_webserver/src/lwipopts.h index a215017c7..639619f63 100644 --- a/examples/device/net_lwip_webserver/src/lwipopts.h +++ b/examples/device/net_lwip_webserver/src/lwipopts.h @@ -49,7 +49,9 @@ #define TCP_MSS (1500 /*mtu*/ - 20 /*iphdr*/ - 20 /*tcphhr*/) #define TCP_SND_BUF (2 * TCP_MSS) +#ifndef TCP_WND #define TCP_WND (TCP_MSS) +#endif #define ETHARP_SUPPORT_STATIC_ENTRIES 1 diff --git a/examples/dual/CMakeLists.txt b/examples/dual/CMakeLists.txt new file mode 100644 index 000000000..d2f9a42f0 --- /dev/null +++ b/examples/dual/CMakeLists.txt @@ -0,0 +1,12 @@ +cmake_minimum_required(VERSION 3.5) + +include(${CMAKE_CURRENT_SOURCE_DIR}/../../hw/bsp/family_support.cmake) + +project(tinyusb_dual_examples) +family_initialize_project(tinyusb_dual_examples ${CMAKE_CURRENT_LIST_DIR}) +if (FAMILY STREQUAL "rp2040" AND NOT TARGET tinyusb_pico_pio_usb) + message("Skipping dual host/device mode examples as Pico-PIO-USB is not available") +else() + # family_add_subdirectory will filter what to actually add based on selected FAMILY + family_add_subdirectory(host_hid_to_device_cdc) +endif() diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index 24ebfdec3..ea4e087e3 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -25,6 +25,4 @@ target_include_directories(${PROJECT} PUBLIC # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) -family_configure_host_example(${PROJECT}) -family_configure_pico_pio_usb_example(${PROJECT}) +family_configure_dual_usb_example(${PROJECT}) diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 607ef22eb..bc04b01a7 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -27,4 +27,4 @@ target_include_directories(${PROJECT} PUBLIC family_configure_host_example(${PROJECT}) # For rp2040, un-comment to enable pico-pio-usb -# family_configure_pico_pio_usb_example(${PROJECT}) +# family_add_pico_pio_usb(${PROJECT}) \ No newline at end of file diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index 214e9f2e7..c4a4d8e63 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -29,4 +29,4 @@ target_include_directories(${PROJECT} PUBLIC family_configure_host_example(${PROJECT}) # For rp2040, un-comment to enable pico-pio-usb -# family_configure_pico_pio_usb_example(${PROJECT}) +# family_add_pico_pio_usb(${PROJECT}) diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index 6227e0790..6153d399a 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -28,4 +28,4 @@ target_include_directories(${PROJECT} PUBLIC family_configure_host_example(${PROJECT}) # For rp2040, un-comment to enable pico-pio-usb -# family_configure_pico_pio_usb_example(${PROJECT}) +# family_add_pico_pio_usb(${PROJECT}) diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index dcf38b6ec..8de1c1aab 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -127,8 +127,10 @@ void board_init(void) #ifndef BUTTON_BOOTSEL #endif +#if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB // Set the system clock to a multiple of 120mhz for bitbanging USB with pico-usb set_sys_clock_khz(120000, true); +#endif #if defined(UART_DEV) && defined(LIB_PICO_STDIO_UART) bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART)); diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 17ae3de9b..df3a6a91e 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -23,7 +23,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) set(PICO_TINYUSB_PATH ${TOP}) endif() - #------------------------------------ + #------------------------------------ # Base config for both device and host; wrapped by SDK's tinyusb_common #------------------------------------ add_library(tinyusb_common_base INTERFACE) @@ -50,7 +50,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) if (CMAKE_BUILD_TYPE STREQUAL "Debug") message("Compiling TinyUSB with CFG_TUSB_DEBUG=1") set(TINYUSB_DEBUG_LEVEL 1) - endif () + endif() target_compile_definitions(tinyusb_common_base INTERFACE CFG_TUSB_MCU=OPT_MCU_RP2040 @@ -58,44 +58,13 @@ if (NOT TARGET _rp2040_family_inclusion_marker) CFG_TUSB_DEBUG=${TINYUSB_DEBUG_LEVEL} ) - #------------------------------------ - # PIO USB for both host and device - #------------------------------------ - add_library(pico_pio_usb INTERFACE) - - if (NOT DEFINED PICO_PIO_USB_PATH) - set(PICO_PIO_USB_PATH "${TOP}/hw/mcu/raspberry_pi/Pico-PIO-USB") - endif() - - target_sources(pico_pio_usb INTERFACE - ${PICO_PIO_USB_PATH}/src/pio_usb.c - ${PICO_PIO_USB_PATH}/src/pio_usb_host.c - ${PICO_PIO_USB_PATH}/src/pio_usb_device.c - ${PICO_PIO_USB_PATH}/src/usb_crc.c - ) - - target_include_directories(pico_pio_usb INTERFACE - ${PICO_PIO_USB_PATH}/src - ) - - target_link_libraries(pico_pio_usb INTERFACE - hardware_dma - hardware_pio - pico_multicore - ) - - target_compile_definitions(pico_pio_usb INTERFACE - PIO_USB_USE_TINYUSB - ) - - #------------------------------------ + #------------------------------------ # Base config for device mode; wrapped by SDK's tinyusb_device #------------------------------------ add_library(tinyusb_device_base INTERFACE) target_sources(tinyusb_device_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c - ${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c ${TOP}/src/device/usbd.c ${TOP}/src/device/usbd_control.c ${TOP}/src/class/audio/audio_device.c @@ -119,7 +88,6 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_sources(tinyusb_host_base INTERFACE ${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c ${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c - ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c ${TOP}/src/host/usbh.c ${TOP}/src/host/hub.c ${TOP}/src/class/cdc/cdc_host.c @@ -140,8 +108,8 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_sources(tinyusb_bsp INTERFACE ${TOP}/hw/bsp/rp2040/family.c ) -# target_include_directories(tinyusb_bsp INTERFACE -# ${TOP}/hw/bsp/rp2040) + # target_include_directories(tinyusb_bsp INTERFACE + # ${TOP}/hw/bsp/rp2040) # tinyusb_additions will hold our extra settings for examples add_library(tinyusb_additions INTERFACE) @@ -151,22 +119,22 @@ if (NOT TARGET _rp2040_family_inclusion_marker) ) if(DEFINED LOG) - target_compile_definitions(tinyusb_additions INTERFACE CFG_TUSB_DEBUG=${LOG} ) + target_compile_definitions(tinyusb_additions INTERFACE CFG_TUSB_DEBUG=${LOG}) endif() if(LOGGER STREQUAL "rtt") - target_compile_definitions(tinyusb_additions INTERFACE - LOGGER_RTT - SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL - ) - - target_sources(tinyusb_additions INTERFACE - ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c - ) - - target_include_directories(tinyusb_additions INTERFACE - ${TOP}/lib/SEGGER_RTT/RTT - ) + target_compile_definitions(tinyusb_additions INTERFACE + LOGGER_RTT + SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL + ) + + target_sources(tinyusb_additions INTERFACE + ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c + ) + + target_include_directories(tinyusb_additions INTERFACE + ${TOP}/lib/SEGGER_RTT/RTT + ) endif() #------------------------------------ @@ -189,41 +157,81 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) endfunction() - function(family_configure_pico_pio_usb_example TARGET) + function(family_add_pico_pio_usb TARGET) + target_link_libraries(${TARGET} PUBLIC tinyusb_pico_pio_usb) + endfunction() + + function(family_configure_dual_usb_example TARGET) family_configure_target(${TARGET}) - target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_pio_usb) - pico_generate_pio_header(tinyusb_common_base ${PICO_PIO_USB_PATH}/src/usb_tx.pio) - pico_generate_pio_header(tinyusb_common_base ${PICO_PIO_USB_PATH}/src/usb_rx.pio) + # require tinyusb_pico_pio_usb + target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_host tinyusb_pico_pio_usb ) endfunction() + function(check_and_add_pico_pio_usb_support) + # check for pico_generate_pio_header (as depending on environment we may be called before SDK is + # initialized in which case it isn't available yet), and only do the initialization once + if (COMMAND pico_generate_pio_header AND NOT TARGET tinyusb_pico_pio_usb) + #------------------------------------ + # PIO USB for both host and device + #------------------------------------ + + if (NOT DEFINED PICO_PIO_USB_PATH) + set(PICO_PIO_USB_PATH "${TOP}/hw/mcu/raspberry_pi/Pico-PIO-USB") + endif() + + if (EXISTS ${PICO_PIO_USB_PATH}/src/pio_usb.c) + add_library(tinyusb_pico_pio_usb INTERFACE) + target_sources(tinyusb_device_base INTERFACE + ${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c + ) + target_sources(tinyusb_host_base INTERFACE + ${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c + ) + + target_sources(tinyusb_pico_pio_usb INTERFACE + ${PICO_PIO_USB_PATH}/src/pio_usb.c + ${PICO_PIO_USB_PATH}/src/pio_usb_host.c + ${PICO_PIO_USB_PATH}/src/pio_usb_device.c + ${PICO_PIO_USB_PATH}/src/usb_crc.c + ) + + target_include_directories(tinyusb_pico_pio_usb INTERFACE + ${PICO_PIO_USB_PATH}/src + ) + + target_link_libraries(tinyusb_pico_pio_usb INTERFACE + hardware_dma + hardware_pio + pico_multicore + ) + + target_compile_definitions(tinyusb_pico_pio_usb INTERFACE + PIO_USB_USE_TINYUSB + ) + + pico_generate_pio_header(tinyusb_pico_pio_usb ${PICO_PIO_USB_PATH}/src/usb_tx.pio) + pico_generate_pio_header(tinyusb_pico_pio_usb ${PICO_PIO_USB_PATH}/src/usb_rx.pio) + endif() + endif() + endfunction() + + # Try to add Pico-PIO_USB support now for the case where this file is included directly + # after Pico SDK initialization, but without using the family_ functions (as is the case + # when included by the SDK itself) + check_and_add_pico_pio_usb_support() + function(family_initialize_project PROJECT DIR) # call the original version of this function from family_common.cmake _family_initialize_project(${PROJECT} ${DIR}) enable_language(C CXX ASM) pico_sdk_init() + + # now re-check for adding Pico-PIO_USB support now SDK is definitely available + check_and_add_pico_pio_usb_support() endfunction() # This method must be called from the project scope to suppress known warnings in TinyUSB source files function(suppress_tinyusb_warnings) - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/tusb.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual") - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/device/usbd.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual -Wno-null-dereference") - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/device/usbd_control.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") + # there are currently no warnings to suppress, however this function must still exist endfunction() endif() diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 5164035aa..54c27ffe3 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -537,7 +537,11 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet (void) rhport; // Copy data into setup packet buffer +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Warray-bounds" +#pragma GCC diagnostic ignored "-Wstringop-overflow" memcpy((void*)&usbh_dpram->setup_packet[0], setup_packet, 8); +#pragma GCC diagnostic pop // Configure EP0 struct with setup info for the trans complete struct hw_endpoint *ep = _hw_endpoint_allocate(0); diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 9c3e5d011..c93199fd0 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -58,9 +58,9 @@ void rp2040_usb_init(void) unreset_block_wait(RESETS_RESET_USBCTRL_BITS); // Clear any previous state just in case - // TODO Suppress warning array-bounds with gcc11 #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Warray-bounds" +#pragma GCC diagnostic ignored "-Wstringop-overflow" memset(usb_hw, 0, sizeof(*usb_hw)); memset(usb_dpram, 0, sizeof(*usb_dpram)); #pragma GCC diagnostic pop -- cgit v1.3.1 From 99c1585ed215cb5ee2e27a41c54310d144e0ee6c Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 1 Jun 2022 23:53:40 +0700 Subject: rename board specific macro for example - BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT - BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED --- examples/device/cdc_dual_ports/src/tusb_config.h | 16 ++++----- examples/device/cdc_msc/src/tusb_config.h | 36 +++++++++++++------ examples/device/cdc_msc_freertos/src/tusb_config.h | 18 +++++----- examples/device/dfu/src/tusb_config.h | 16 ++++----- examples/device/dfu_runtime/src/tusb_config.h | 16 ++++----- .../device/dynamic_configuration/src/tusb_config.h | 16 ++++----- .../device/hid_boot_interface/src/tusb_config.h | 18 +++++----- examples/device/hid_composite/src/tusb_config.h | 16 ++++----- .../hid_composite_freertos/src/tusb_config.h | 16 ++++----- .../device/hid_generic_inout/src/tusb_config.h | 16 ++++----- .../hid_multiple_interface/src/tusb_config.h | 16 ++++----- examples/device/midi_test/src/tusb_config.h | 16 ++++----- examples/device/msc_dual_lun/src/tusb_config.h | 16 ++++----- .../device/net_lwip_webserver/src/tusb_config.h | 16 ++++----- examples/device/usbtmc/src/tusb_config.h | 16 ++++----- examples/device/video_capture/src/tusb_config.h | 16 ++++----- examples/device/webusb_serial/src/tusb_config.h | 16 ++++----- .../dual/host_hid_to_device_cdc/src/tusb_config.h | 36 +++++++++---------- hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk | 4 +-- hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk | 4 +-- hw/bsp/imxrt/family.mk | 8 ++--- hw/bsp/lpc54/family.mk | 2 +- hw/bsp/lpc55/family.mk | 4 +-- hw/bsp/stm32f7/family.c | 4 +-- hw/bsp/stm32f7/family.mk | 6 ++-- hw/bsp/stm32h7/family.c | 4 +-- hw/bsp/stm32h7/family.mk | 6 ++-- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 42 +++++++++++----------- src/tusb_option.h | 2 ++ 29 files changed, 217 insertions(+), 201 deletions(-) (limited to 'hw') diff --git a/examples/device/cdc_dual_ports/src/tusb_config.h b/examples/device/cdc_dual_ports/src/tusb_config.h index f93606092..037fc8290 100644 --- a/examples/device/cdc_dual_ports/src/tusb_config.h +++ b/examples/device/cdc_dual_ports/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 6507cef19..3849ad4d0 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -39,31 +39,45 @@ #error CFG_TUSB_MCU must be defined #endif +// This example doesn't use an RTOS +#ifndef CFG_TUSB_OS +#define CFG_TUSB_OS OPT_OS_NONE +#endif + +// Enable Device stack +#define CFG_TUD_ENABLED 1 + // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif -// This example doesn't use an RTOS -#ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE + + +// Device max speed, default is max speed that hardware controller could support without external PHY +// BOARD_TUD_MAX_SPEED can be used to change value (e.g for board features external PHY). +#ifdef BOARD_TUD_MAX_SPEED + #define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED +#else + #define CFG_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif + // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 55e84c62d..d8eeda07d 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -40,26 +40,26 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED +#ifndef BOARD_TUD_MAX_SPEED #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_HIGH_SPEED #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_FULL_SPEED #endif #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/dfu/src/tusb_config.h b/examples/device/dfu/src/tusb_config.h index d4779b2e1..924ede47a 100644 --- a/examples/device/dfu/src/tusb_config.h +++ b/examples/device/dfu/src/tusb_config.h @@ -22,21 +22,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/dfu_runtime/src/tusb_config.h b/examples/device/dfu_runtime/src/tusb_config.h index e15ae7997..f31c9c970 100644 --- a/examples/device/dfu_runtime/src/tusb_config.h +++ b/examples/device/dfu_runtime/src/tusb_config.h @@ -22,21 +22,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index ddc295dcc..333b62e03 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_boot_interface/src/tusb_config.h b/examples/device/hid_boot_interface/src/tusb_config.h index 8bc85b722..e3c50aa3f 100644 --- a/examples/device/hid_boot_interface/src/tusb_config.h +++ b/examples/device/hid_boot_interface/src/tusb_config.h @@ -41,24 +41,24 @@ // Use raspberry pio-usb for device // #define CFG_TUD_RPI_PIO_USB 1 -// #define BOARD_DEVICE_RHPORT_NUM 1 +// #define BOARD_TUD_RHPORT 1 // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index d0f2b513f..1a9223f5b 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 7522bd714..8fd6498e6 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_generic_inout/src/tusb_config.h b/examples/device/hid_generic_inout/src/tusb_config.h index 9db50269c..e5ae4b0cc 100644 --- a/examples/device/hid_generic_inout/src/tusb_config.h +++ b/examples/device/hid_generic_inout/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/hid_multiple_interface/src/tusb_config.h b/examples/device/hid_multiple_interface/src/tusb_config.h index 32e8c2843..766b8e518 100644 --- a/examples/device/hid_multiple_interface/src/tusb_config.h +++ b/examples/device/hid_multiple_interface/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/midi_test/src/tusb_config.h b/examples/device/midi_test/src/tusb_config.h index 967c71403..a7673245e 100644 --- a/examples/device/midi_test/src/tusb_config.h +++ b/examples/device/midi_test/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/msc_dual_lun/src/tusb_config.h b/examples/device/msc_dual_lun/src/tusb_config.h index f617f5a4c..2778e61b0 100644 --- a/examples/device/msc_dual_lun/src/tusb_config.h +++ b/examples/device/msc_dual_lun/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h index b1b48598b..5042c0e5d 100644 --- a/examples/device/net_lwip_webserver/src/tusb_config.h +++ b/examples/device/net_lwip_webserver/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/usbtmc/src/tusb_config.h b/examples/device/usbtmc/src/tusb_config.h index 5b2215be5..0b2df291a 100644 --- a/examples/device/usbtmc/src/tusb_config.h +++ b/examples/device/usbtmc/src/tusb_config.h @@ -22,21 +22,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 3a079e66b..85bf80a64 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -35,21 +35,21 @@ //-------------------------------------------------------------------- // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/device/webusb_serial/src/tusb_config.h b/examples/device/webusb_serial/src/tusb_config.h index f5e4694e3..eab1d6387 100644 --- a/examples/device/webusb_serial/src/tusb_config.h +++ b/examples/device/webusb_serial/src/tusb_config.h @@ -40,21 +40,21 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort max operational speed can defined by board.mk // Default to max (auto) speed for MCU with internal HighSpeed PHY -#ifndef BOARD_DEVICE_RHPORT_SPEED - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_DEFAULT_SPEED +#ifndef BOARD_TUD_MAX_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h index 0fa4899a9..9a8f31da0 100644 --- a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h +++ b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h @@ -40,13 +40,13 @@ #endif // RHPort number used for device can be defined by board.mk, default to port 0 -#ifndef BOARD_DEVICE_RHPORT_NUM - #define BOARD_DEVICE_RHPORT_NUM 0 +#ifndef BOARD_TUD_RHPORT + #define BOARD_TUD_RHPORT 0 #endif // RHPort number used for device can be defined by board.mk, default to port 1 -#ifndef BOARD_HOST_RHPORT_NUM - #define BOARD_HOST_RHPORT_NUM 1 +#ifndef BOARD_TUH_RHPORT + #define BOARD_TUH_RHPORT 1 #endif // Use raspberry pio-usb for host @@ -54,42 +54,42 @@ // RHPort max operational speed can defined by board.mk // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_DEVICE_RHPORT_SPEED +#ifndef BOARD_TUD_MAX_SPEED #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\ TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X) - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_HIGH_SPEED #else - #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #define BOARD_TUD_MAX_SPEED OPT_MODE_FULL_SPEED #endif #endif // RHPort max operational speed can defined by board.mk // Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed -#ifndef BOARD_HOST_RHPORT_SPEED +#ifndef BOARD_TUH_MAX_SPEED #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\ TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\ TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X) - #define BOARD_HOST_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #define BOARD_TUH_MAX_SPEED OPT_MODE_HIGH_SPEED #else - #define BOARD_HOST_RHPORT_SPEED OPT_MODE_FULL_SPEED + #define BOARD_TUH_MAX_SPEED OPT_MODE_FULL_SPEED #endif #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_DEVICE_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) -#elif BOARD_DEVICE_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#if BOARD_TUD_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) +#elif BOARD_TUD_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif // Device mode with rhport and speed defined by board.mk -#if BOARD_HOST_RHPORT_NUM == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED) -#elif BOARD_HOST_RHPORT_NUM == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_HOST | BOARD_HOST_RHPORT_SPEED) +#if BOARD_TUH_RHPORT == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | BOARD_TUH_MAX_SPEED) +#elif BOARD_TUH_RHPORT == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_HOST | BOARD_TUH_MAX_SPEED) #else #error "Incorrect RHPort configuration" #endif diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk index b14b2a6b9..d21063c99 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk @@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1062xxx6A # For flash-pyocd target PYOCD_TARGET = mimxrt1060 -BOARD_DEVICE_RHPORT_NUM = 1 -BOARD_HOST_RHPORT_NUM = 0 +BOARD_TUD_RHPORT = 1 +BOARD_TUH_RHPORT = 0 # flash using pyocd flash: flash-pyocd diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk index 2b479719f..00b574c52 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk @@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1064xxx6A # For flash-pyocd target PYOCD_TARGET = mimxrt1064 -BOARD_DEVICE_RHPORT_NUM = 1 -BOARD_HOST_RHPORT_NUM = 0 +BOARD_TUD_RHPORT = 1 +BOARD_TUH_RHPORT = 0 # flash using pyocd flash: flash-pyocd diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index 0bf4a0d15..c81e67eb6 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -15,11 +15,11 @@ CFLAGS += \ -DXIP_BOOT_HEADER_ENABLE=1 \ -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -ifdef BOARD_DEVICE_RHPORT_NUM -CFLAGS += -DBOARD_DEVICE_RHPORT_NUM=$(BOARD_DEVICE_RHPORT_NUM) +ifdef BOARD_TUD_RHPORT +CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT) endif -ifdef BOARD_HOST_RHPORT_NUM -CFLAGS += -DBOARD_HOST_RHPORT_NUM=$(BOARD_HOST_RHPORT_NUM) +ifdef BOARD_TUH_RHPORT +CFLAGS += -DBOARD_TUH_RHPORT=$(BOARD_TUH_RHPORT) endif # mcu driver cause following warnings diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk index 600df6fd0..39111d1ad 100644 --- a/hw/bsp/lpc54/family.mk +++ b/hw/bsp/lpc54/family.mk @@ -15,7 +15,7 @@ CFLAGS += \ ifeq ($(PORT), 1) $(info "PORT1 High Speed") - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED # LPC55 Highspeed Port1 can only write to USB_SRAM region CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index 4e8d65ce9..1af1d076e 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -16,11 +16,11 @@ CFLAGS += \ -mfpu=fpv5-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + -DBOARD_TUD_RHPORT=$(PORT) ifeq ($(PORT), 1) $(info "PORT1 High Speed") - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED # LPC55 Highspeed Port1 can only write to USB_SRAM region CFLAGS += -DCFG_TUSB_MEM_SECTION='__attribute__((section("m_usb_global")))' diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 14e3b2fd9..425e6e1bc 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -125,7 +125,7 @@ void board_init(void) UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); -#if BOARD_DEVICE_RHPORT_NUM == 0 +#if BOARD_TUD_RHPORT == 0 // OTG_FS /* Configure DM DP Pins */ @@ -258,7 +258,7 @@ void board_init(void) USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; -#endif // BOARD_DEVICE_RHPORT_NUM +#endif // BOARD_TUD_RHPORT } diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index 8482e6dd2..b8a5d7ead 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -16,14 +16,14 @@ CFLAGS += \ -mfpu=fpv5-d16 \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + -DBOARD_TUD_RHPORT=$(PORT) ifeq ($(PORT), 1) ifeq ($(SPEED), high) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED $(info "Using OTG_HS in HighSpeed mode") else - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED $(info "Using OTG_HS in FullSpeed mode") endif else diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 84976b4e4..3964f427a 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -122,7 +122,7 @@ void board_init(void) UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); -#if BOARD_DEVICE_RHPORT_NUM == 0 +#if BOARD_TUD_RHPORT == 0 // Despite being call USB2_OTG // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP @@ -166,7 +166,7 @@ void board_init(void) USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; #endif // vbus sense -#elif BOARD_DEVICE_RHPORT_NUM == 1 +#elif BOARD_TUD_RHPORT == 1 // Despite being call USB2_OTG // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index 096d04d0c..a1cd93b27 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -16,14 +16,14 @@ CFLAGS += \ -mfpu=fpv5-d16 \ -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + -DBOARD_TUD_RHPORT=$(PORT) ifeq ($(PORT), 1) ifeq ($(SPEED), high) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED $(info "Using OTG_HS in HighSpeed mode") else - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED $(info "Using OTG_HS in FullSpeed mode") endif else diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 3c3cb63b8..7a65cf5d0 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -239,12 +239,12 @@ static void _dcd_ft90x_attach(void) CRITICAL_SECTION_BEGIN // Turn off the device enable bit. -#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED +#if BOARD_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED USBD_REG(fctrl) = 0; -#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED +#else // BOARD_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED //Set the full speed only bit if required. USBD_REG(fctrl) = MASK_USBD_FCTRL_MODE_FS_ONLY; -#endif // BOARD_DEVICE_RHPORT_SPEED +#endif // BOARD_TUD_MAX_SPEED // Clear first reset and suspend interrupts. do @@ -291,7 +291,7 @@ static void _dcd_ft90x_detach(void) delayms(1); // Disable USB PHY - dcd_disconnect(BOARD_DEVICE_RHPORT_NUM); + dcd_disconnect(BOARD_TUD_RHPORT); delayms(1); // Disable Chip USB device clock/PM configuration. @@ -323,7 +323,7 @@ static void _ft90x_usb_speed(void) delayus(200); } -#if BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_HIGH_SPEED +#if BOARD_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED /* Detect high or full speed */ fctrl_val = MASK_USBD_FCTRL_USB_DEV_EN; @@ -347,11 +347,11 @@ static void _ft90x_usb_speed(void) delayus(125 + 5); _speed = (USBD_REG(cmif) & MASK_USBD_CMIF_SOFIRQ) ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL; - dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true); + dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true); #endif /* !__FT930__ */ -#else // BOARD_DEVICE_RHPORT_SPEED == OPT_MODE_FULL_SPEED +#else // BOARD_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED /* User force set to full speed */ _speed = TUSB_SPEED_FULL; @@ -364,10 +364,10 @@ static void _ft90x_usb_speed(void) } #endif USBD_REG(fctrl) = fctrl_val; - dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true); + dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true); return; -#endif // BOARD_DEVICE_RHPORT_SPEED +#endif // BOARD_TUD_MAX_SPEED } // Send a buffer to the USB IN FIFO. @@ -899,7 +899,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) void _ft90x_usbd_ISR(void) { - tud_int_handler(BOARD_DEVICE_RHPORT_NUM); // Resolves to dcd_int_handler(). + tud_int_handler(BOARD_TUD_RHPORT); // Resolves to dcd_int_handler(). } void dcd_int_handler(uint8_t rhport) @@ -937,19 +937,19 @@ void dcd_int_handler(uint8_t rhport) { // Reset endpoints to default state. _ft90x_reset_edpts(); - dcd_event_bus_reset(BOARD_DEVICE_RHPORT_NUM, _speed, true); + dcd_event_bus_reset(BOARD_TUD_RHPORT, _speed, true); } if (cmif & MASK_USBD_CMIF_SUSIRQ) //Handle Suspend interrupt { - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SUSPEND, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_SUSPEND, true); } if (cmif & MASK_USBD_CMIF_RESIRQ) //Handle Resume interrupt { - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true); } if (cmif & MASK_USBD_CMIF_SOFIRQ) //Handle SOF interrupt { - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_SOF, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_SOF, true); } } // Handle endpoint interrupts. @@ -980,7 +980,7 @@ void dcd_int_handler(uint8_t rhport) _ft90x_dusb_out(USBD_EP_0, (uint8_t *)_ft90x_setup_packet, sizeof(USB_device_request)); // Send the packet to tinyusb. - dcd_event_setup_received(BOARD_DEVICE_RHPORT_NUM, _ft90x_setup_packet, true); + dcd_event_setup_received(BOARD_TUD_RHPORT, _ft90x_setup_packet, true); // Clear the interrupt that signals a SETUP packet is received. USBD_EP_SR_REG(USBD_EP_0) = (MASK_USBD_EP0SR_SETUP); @@ -1002,7 +1002,7 @@ void dcd_int_handler(uint8_t rhport) xfer_bytes = _ft90x_edpt_xfer_out(USBD_EP_0, (uint8_t *)ep_xfer[USBD_EP_0].buff_ptr, xfer_bytes); } // Now signal completion of data packet. - dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(BOARD_TUD_RHPORT, (ep_xfer[USBD_EP_0].dir ? TUSB_DIR_IN_MASK : 0), xfer_bytes, XFER_RESULT_SUCCESS, true); // Allow new transfers on the control endpoint. ep_xfer[USBD_EP_0].valid = 0; @@ -1059,7 +1059,7 @@ void dcd_int_handler(uint8_t rhport) if (ep_xfer[ep_number].remain_size == 0) { // Signal tinyUSB. - dcd_event_xfer_complete(BOARD_DEVICE_RHPORT_NUM, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(BOARD_TUD_RHPORT, ep_number | ep_dirmask, ep_xfer[ep_number].total_size, XFER_RESULT_SUCCESS, true); // Allow new transfers on this endpoint. ep_xfer[ep_number].valid = 0; @@ -1084,21 +1084,21 @@ void ft90x_usbd_pm_ISR(void) { // Signal connection interrupt SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true); } if (pmcfg & MASK_SYS_PMCFG_DEV_DIS_DEV) { // Signal disconnection interrupt SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_UNPLUGGED, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_UNPLUGGED, true); } if (pmcfg & MASK_SYS_PMCFG_HOST_RST_DEV) { // Signal Host Reset interrupt SYS->PMCFG_H = MASK_SYS_PMCFG_PM_GPIO_IRQ_PEND; - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_BUS_RESET, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_BUS_RESET, true); } if (pmcfg & MASK_SYS_PMCFG_HOST_RESUME_DEV) @@ -1109,7 +1109,7 @@ void ft90x_usbd_pm_ISR(void) { // If we are driving K-state on Device USB port; // We must maintain the 1ms requirement before resuming the phy - dcd_event_bus_signal(BOARD_DEVICE_RHPORT_NUM, DCD_EVENT_RESUME, true); + dcd_event_bus_signal(BOARD_TUD_RHPORT, DCD_EVENT_RESUME, true); } } } diff --git a/src/tusb_option.h b/src/tusb_option.h index 3b054fc78..ce22a8a6a 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -221,7 +221,9 @@ typedef int make_iso_compilers_happy ; #define TUD_OPT_RHPORT -1 #endif +#ifndef CFG_TUD_ENABLED #define CFG_TUD_ENABLED (TUD_RHPORT_MODE & OPT_MODE_DEVICE) +#endif #if CFG_TUD_ENABLED #define TUD_OPT_HIGH_SPEED ((TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (TUP_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT))) -- cgit v1.3.1 From 8b9cf152a0dedda573fb3374d8c873dce4b883d1 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 Jun 2022 16:51:17 +0700 Subject: rhport argument in usbd_ API() is not used (always use the initialized port) remove the usage of TUD_OPT_RHPORT in class driver --- examples/device/cdc_msc/src/tusb_config.h | 31 ++++++--------------- hw/bsp/lpc18/family.c | 35 +++++++++++++++-------- src/class/bth/bth_device.c | 6 ++-- src/class/cdc/cdc_device.c | 4 +-- src/class/hid/hid_device.c | 7 +++-- src/class/midi/midi_device.c | 4 +-- src/class/net/ecm_rndis_device.c | 10 ++++--- src/class/net/ncm_device.c | 9 +++--- src/class/vendor/vendor_device.c | 12 +++++--- src/common/tusb_mcu.h | 29 +++++++++---------- src/device/usbd.c | 14 +++++++++- src/device/usbd_pvt.h | 1 + src/tusb_option.h | 46 ++++++++++++++++--------------- 13 files changed, 114 insertions(+), 94 deletions(-) (limited to 'hw') diff --git a/examples/device/cdc_msc/src/tusb_config.h b/examples/device/cdc_msc/src/tusb_config.h index 3849ad4d0..363da88d7 100644 --- a/examples/device/cdc_msc/src/tusb_config.h +++ b/examples/device/cdc_msc/src/tusb_config.h @@ -41,7 +41,12 @@ // This example doesn't use an RTOS #ifndef CFG_TUSB_OS -#define CFG_TUSB_OS OPT_OS_NONE + #define CFG_TUSB_OS OPT_OS_NONE +#endif + +// CFG_TUSB_DEBUG is defined by compiler in DEBUG build +#ifndef CFG_TUSB_DEBUG + #define CFG_TUSB_DEBUG 0 #endif // Enable Device stack @@ -53,34 +58,14 @@ #endif // RHPort max operational speed can defined by board.mk -// Default to max (auto) speed for MCU with internal HighSpeed PHY #ifndef BOARD_TUD_MAX_SPEED #define BOARD_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED #endif -// Device mode with rhport and speed defined by board.mk -#if BOARD_TUD_RHPORT == 0 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#elif BOARD_TUD_RHPORT == 1 - #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED) -#else - #error "Incorrect RHPort configuration" -#endif - +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED -// Device max speed, default is max speed that hardware controller could support without external PHY -// BOARD_TUD_MAX_SPEED can be used to change value (e.g for board features external PHY). -#ifdef BOARD_TUD_MAX_SPEED - #define CFG_TUD_MAX_SPEED BOARD_TUD_MAX_SPEED -#else - #define CFG_TUD_MAX_SPEED OPT_MODE_DEFAULT_SPEED -#endif - - -// CFG_TUSB_DEBUG is defined by compiler in DEBUG build -// #define CFG_TUSB_DEBUG 0 - /* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. * Tinyusb use follows macros to declare transferring memory so that they can be put * into those specific section. diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index d74ebcd33..a59b6e89d 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -28,28 +28,40 @@ #include "bsp/board.h" #include "board.h" +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + //--------------------------------------------------------------------+ // USB Interrupt Handler //--------------------------------------------------------------------+ void USB0_IRQHandler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); #endif - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0); #endif } void USB1_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1); #endif } @@ -84,7 +96,8 @@ void board_init(void) SysTick_Config(SystemCoreClock / 1000); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif Chip_GPIO_Init(LPC_GPIO_PORT); @@ -102,11 +115,11 @@ void board_init(void) Chip_UART_TXEnable(UART_DEV); //------------- USB -------------// -#if CFG_TUSB_RHPORT0_MODE +#if PORT_SUPPORT_DEVICE(0) || PORT_SUPPORT_HOST(0) Chip_USB0_Init(); #endif -#if CFG_TUSB_RHPORT1_MODE +#if PORT_SUPPORT_DEVICE(1) || PORT_SUPPORT_HOST(1) Chip_USB1_Init(); #endif } diff --git a/src/class/bth/bth_device.c b/src/class/bth/bth_device.c index f40bfbd0d..f96bb3552 100755 --- a/src/class/bth/bth_device.c +++ b/src/class/bth/bth_device.c @@ -59,10 +59,12 @@ CFG_TUSB_MEM_SECTION btd_interface_t _btd_itf; static bool bt_tx_data(uint8_t ep, void *data, uint16_t len) { + uint8_t const rhport = 0; + // skip if previous transfer not complete - TU_VERIFY(!usbd_edpt_busy(TUD_OPT_RHPORT, ep)); + TU_VERIFY(!usbd_edpt_busy(rhport, ep)); - TU_ASSERT(usbd_edpt_xfer(TUD_OPT_RHPORT, ep, data, len)); + TU_ASSERT(usbd_edpt_xfer(rhport, ep, data, len)); return true; } diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 2b9b84e7a..7aa7a4860 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -82,7 +82,7 @@ CFG_TUSB_MEM_SECTION static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; static bool _prep_out_transaction (cdcd_interface_t* p_cdc) { - uint8_t const rhport = TUD_OPT_RHPORT; + uint8_t const rhport = 0; uint16_t available = tu_fifo_remaining(&p_cdc->rx_ff); // Prepare for incoming data but only allow what we can store in the ring buffer. @@ -189,7 +189,7 @@ uint32_t tud_cdc_n_write_flush (uint8_t itf) // No data to send if ( !tu_fifo_count(&p_cdc->tx_ff) ) return 0; - uint8_t const rhport = TUD_OPT_RHPORT; + uint8_t const rhport = 0; // Claim the endpoint TU_VERIFY( usbd_edpt_claim(rhport, p_cdc->ep_in), 0 ); diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index 562ca7f36..cdf155e1c 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -76,8 +76,9 @@ static inline uint8_t get_index_by_itfnum(uint8_t itf_num) //--------------------------------------------------------------------+ bool tud_hid_n_ready(uint8_t instance) { + uint8_t const rhport = 0; uint8_t const ep_in = _hidd_itf[instance].ep_in; - return tud_ready() && (ep_in != 0) && !usbd_edpt_busy(TUD_OPT_RHPORT, ep_in); + return tud_ready() && (ep_in != 0) && !usbd_edpt_busy(rhport, ep_in); } bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, uint8_t len) @@ -103,7 +104,7 @@ bool tud_hid_n_report(uint8_t instance, uint8_t report_id, void const* report, u memcpy(p_hid->epin_buf, report, len); } - return usbd_edpt_xfer(TUD_OPT_RHPORT, p_hid->ep_in, p_hid->epin_buf, len); + return usbd_edpt_xfer(rhport, p_hid->ep_in, p_hid->epin_buf, len); } uint8_t tud_hid_n_interface_protocol(uint8_t instance) @@ -172,7 +173,7 @@ bool tud_hid_n_gamepad_report(uint8_t instance, uint8_t report_id, //--------------------------------------------------------------------+ void hidd_init(void) { - hidd_reset(TUD_OPT_RHPORT); + hidd_reset(0); } void hidd_reset(uint8_t rhport) diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 2ce1376bd..28e6a92d2 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -92,7 +92,7 @@ bool tud_midi_n_mounted (uint8_t itf) static void _prep_out_transaction (midid_interface_t* p_midi) { - uint8_t const rhport = TUD_OPT_RHPORT; + uint8_t const rhport = 0; uint16_t available = tu_fifo_remaining(&p_midi->rx_ff); // Prepare for incoming data but only allow what we can store in the ring buffer. @@ -219,7 +219,7 @@ static uint32_t write_flush(midid_interface_t* midi) // No data to send if ( !tu_fifo_count(&midi->tx_ff) ) return 0; - uint8_t const rhport = TUD_OPT_RHPORT; + uint8_t const rhport = 0; // skip if previous transfer not complete TU_VERIFY( usbd_edpt_claim(rhport, midi->ep_in), 0 ); diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index f6b318058..d85a3f778 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -108,20 +108,22 @@ static bool can_xmit; void tud_network_recv_renew(void) { - usbd_edpt_xfer(TUD_OPT_RHPORT, _netd_itf.ep_out, received, sizeof(received)); + usbd_edpt_xfer(0, _netd_itf.ep_out, received, sizeof(received)); } static void do_in_xfer(uint8_t *buf, uint16_t len) { can_xmit = false; - usbd_edpt_xfer(TUD_OPT_RHPORT, _netd_itf.ep_in, buf, len); + usbd_edpt_xfer(0, _netd_itf.ep_in, buf, len); } void netd_report(uint8_t *buf, uint16_t len) { + uint8_t const rhport = 0; + // skip if previous report not yet acknowledged by host - if ( usbd_edpt_busy(TUD_OPT_RHPORT, _netd_itf.ep_notif) ) return; - usbd_edpt_xfer(TUD_OPT_RHPORT, _netd_itf.ep_notif, buf, len); + if ( usbd_edpt_busy(rhport, _netd_itf.ep_notif) ) return; + usbd_edpt_xfer(rhport, _netd_itf.ep_notif, buf, len); } //--------------------------------------------------------------------+ diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 1987337f8..00892b49c 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -188,7 +188,7 @@ static void ncm_start_tx(void) { ntb->ndp.datagram[ncm_interface.datagram_count].wDatagramLength = 0; // Kick off an endpoint transfer - usbd_edpt_xfer(TUD_OPT_RHPORT, ncm_interface.ep_in, ntb->data, ntb_length); + usbd_edpt_xfer(0, ncm_interface.ep_in, ntb->data, ntb_length); ncm_interface.transferring = true; // Swap to the other NTB and clear it out @@ -229,7 +229,7 @@ void tud_network_recv_renew(void) { if (!ncm_interface.num_datagrams) { - usbd_edpt_xfer(TUD_OPT_RHPORT, ncm_interface.ep_out, receive_ntb, sizeof(receive_ntb)); + usbd_edpt_xfer(0, ncm_interface.ep_out, receive_ntb, sizeof(receive_ntb)); return; } @@ -316,14 +316,15 @@ uint16_t netd_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint1 static void ncm_report(void) { + uint8_t const rhport = 0; if (ncm_interface.report_state == REPORT_SPEED) { ncm_notify_speed_change.header.wIndex = ncm_interface.itf_num; - usbd_edpt_xfer(TUD_OPT_RHPORT, ncm_interface.ep_notif, (uint8_t *) &ncm_notify_speed_change, sizeof(ncm_notify_speed_change)); + usbd_edpt_xfer(rhport, ncm_interface.ep_notif, (uint8_t *) &ncm_notify_speed_change, sizeof(ncm_notify_speed_change)); ncm_interface.report_state = REPORT_CONNECTED; ncm_interface.report_pending = true; } else if (ncm_interface.report_state == REPORT_CONNECTED) { ncm_notify_connected.header.wIndex = ncm_interface.itf_num; - usbd_edpt_xfer(TUD_OPT_RHPORT, ncm_interface.ep_notif, (uint8_t *) &ncm_notify_connected, sizeof(ncm_notify_connected)); + usbd_edpt_xfer(rhport, ncm_interface.ep_notif, (uint8_t *) &ncm_notify_connected, sizeof(ncm_notify_connected)); ncm_interface.report_state = REPORT_DONE; ncm_interface.report_pending = true; } diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 6e3ceb1c4..c7dfa0062 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -84,14 +84,16 @@ bool tud_vendor_n_peek(uint8_t itf, uint8_t* u8) //--------------------------------------------------------------------+ static void _prep_out_transaction (vendord_interface_t* p_itf) { + uint8_t const rhport = 0; + // skip if previous transfer not complete - if ( usbd_edpt_busy(TUD_OPT_RHPORT, p_itf->ep_out) ) return; + if ( usbd_edpt_busy(rhport, p_itf->ep_out) ) return; // Prepare for incoming data but only allow what we can store in the ring buffer. uint16_t max_read = tu_fifo_remaining(&p_itf->rx_ff); if ( max_read >= CFG_TUD_VENDOR_EPSIZE ) { - usbd_edpt_xfer(TUD_OPT_RHPORT, p_itf->ep_out, p_itf->epout_buf, CFG_TUD_VENDOR_EPSIZE); + usbd_edpt_xfer(rhport, p_itf->ep_out, p_itf->epout_buf, CFG_TUD_VENDOR_EPSIZE); } } @@ -115,13 +117,15 @@ void tud_vendor_n_read_flush (uint8_t itf) //--------------------------------------------------------------------+ static uint16_t maybe_transmit(vendord_interface_t* p_itf) { + uint8_t const rhport = 0; + // skip if previous transfer not complete - TU_VERIFY( !usbd_edpt_busy(TUD_OPT_RHPORT, p_itf->ep_in) ); + TU_VERIFY( !usbd_edpt_busy(rhport, p_itf->ep_in) ); uint16_t count = tu_fifo_read_n(&p_itf->tx_ff, p_itf->epin_buf, CFG_TUD_VENDOR_EPSIZE); if (count > 0) { - TU_ASSERT( usbd_edpt_xfer(TUD_OPT_RHPORT, p_itf->ep_in, p_itf->epin_buf, count) ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_itf->ep_in, p_itf->epin_buf, count) ); } return count; } diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index c1cf2a810..383a8d686 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -45,8 +45,7 @@ * - ENDPOINT_MAX: max (logical) number of endpoint * - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed, * e.g EP1 OUT & EP1 IN cannot exist together - * - RHPORT_HIGHSPEED: mask to indicate which port support highspeed mode (without external PHY) - * bit0 for port0 and so on. + * - RHPORT_HIGHSPEED: support highspeed with on-chip PHY */ //------------- NXP -------------// @@ -63,8 +62,7 @@ #define TUP_USBIP_EHCI #define TUP_DCD_ENDPOINT_MAX 6 - #define TUP_RHPORT_HIGHSPEED 0x01 // Port0 HS, Port1 FS - + #define TUP_RHPORT_HIGHSPEED 1 // Port0 HS, Port1 FS #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) #define TUP_DCD_ENDPOINT_MAX 5 @@ -82,8 +80,7 @@ #define TUP_USBIP_EHCI #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 0x03 // Port0 HS, Port1 HS - + #define TUP_RHPORT_HIGHSPEED 1 // Port0 HS, Port1 HS #elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2BXX) #define TUP_DCD_ENDPOINT_MAX 16 @@ -107,7 +104,7 @@ #elif TU_CHECK_MCU(OPT_MCU_SAMX7X) #define TUP_DCD_ENDPOINT_MAX 10 - #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_RHPORT_HIGHSPEED 1 #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER #elif TU_CHECK_MCU(OPT_MCU_PIC32MZ) @@ -155,7 +152,7 @@ // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) - #define TUP_RHPORT_HIGHSPEED 0x02 // Port 0: FS, Port 1: HS + #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H7) @@ -185,12 +182,12 @@ #endif #elif TU_CHECK_MCU(OPT_MCU_STM32WB) -#define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 //------------- Sony -------------// #elif TU_CHECK_MCU(OPT_MCU_CXD56) #define TUP_DCD_ENDPOINT_MAX 7 - #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_RHPORT_HIGHSPEED 1 #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER //------------- TI -------------// @@ -213,7 +210,7 @@ #elif TU_CHECK_MCU(OPT_MCU_NUC505) #define TUP_DCD_ENDPOINT_MAX 12 - #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_RHPORT_HIGHSPEED 1 //------------- Espressif -------------// #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) @@ -228,7 +225,7 @@ #elif TU_CHECK_MCU(OPT_MCU_RP2040) #define TUP_DCD_ENDPOINT_MAX 16 - #define TU_ATTR_FAST_FUNC __attribute__((section(".time_critical.tinyusb"))) + #define TU_ATTR_FAST_FUNC __attribute__((section(".time_critical.tinyusb"))) //------------- Silabs -------------// #elif TU_CHECK_MCU(OPT_MCU_EFM32GG) @@ -248,7 +245,7 @@ #elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) #define TUP_USBIP_DWC2 #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_RHPORT_HIGHSPEED 1 //------------- Broadcom -------------// #elif TU_CHECK_MCU(OPT_MCU_XMC4000) @@ -258,11 +255,11 @@ //------------- BridgeTek -------------// #elif TU_CHECK_MCU(OPT_MCU_FT90X) #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_FT93X) #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 0x01 + #define TUP_RHPORT_HIGHSPEED 1 //------------ Allwinner -------------// #elif TU_CHECK_MCU(OPT_MCU_F1C100S) @@ -281,7 +278,7 @@ // Default to fullspeed if not defined #ifndef TUP_RHPORT_HIGHSPEED - #define TUP_RHPORT_HIGHSPEED 0x00 + #define TUP_RHPORT_HIGHSPEED 0 #endif // fast function, normally mean placing function in SRAM diff --git a/src/device/usbd.c b/src/device/usbd.c index fa75c0214..55e478a4e 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -428,7 +428,6 @@ bool tud_init (uint8_t rhport) dcd_init(rhport); dcd_int_enable(rhport); - return true; } @@ -1199,6 +1198,8 @@ void usbd_defer_func(osal_task_func_t func, void* param, bool in_isr) bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + rhport = _usbd_rhport; + TU_ASSERT(tu_edpt_number(desc_ep->bEndpointAddress) < CFG_TUD_ENDPPOINT_MAX); TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed)); @@ -1240,6 +1241,8 @@ bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr) bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { + rhport = _usbd_rhport; + uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); @@ -1275,6 +1278,8 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // into the USB buffer! bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) { + rhport = _usbd_rhport; + uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); @@ -1314,6 +1319,7 @@ bool usbd_edpt_busy(uint8_t rhport, uint8_t ep_addr) void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { + rhport = _usbd_rhport; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); @@ -1330,6 +1336,8 @@ void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr) void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { + rhport = _usbd_rhport; + uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); @@ -1361,6 +1369,8 @@ bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr) */ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) { + rhport = _usbd_rhport; + TU_ASSERT(dcd_edpt_close, /**/); TU_LOG2(" CLOSING Endpoint: 0x%02X\r\n", ep_addr); @@ -1377,6 +1387,8 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) void usbd_sof_enable(uint8_t rhport, bool en) { + rhport = _usbd_rhport; + // TODO: Check needed if all drivers including the user sof_cb does not need an active SOF ISR any more. // Only if all drivers switched off SOF calls the SOF interrupt may be disabled dcd_sof_enable(rhport, en); diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 603ffc936..17ebbfcd4 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -62,6 +62,7 @@ void usbd_int_set(bool enabled); //--------------------------------------------------------------------+ // USBD Endpoint API +// Note: rhport should be 0 since device stack only support 1 rhport for now //--------------------------------------------------------------------+ // Open an endpoint diff --git a/src/tusb_option.h b/src/tusb_option.h index ce22a8a6a..c198e4ef3 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -195,25 +195,21 @@ typedef int make_iso_compilers_happy ; #define OPT_MODE_HIGH_SPEED 0x0400 ///< High Speed #define OPT_MODE_SPEED_MASK 0xff00 -#ifndef CFG_TUSB_RHPORT0_MODE - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE -#endif +//------------- Roothub as Device -------------// -#ifndef CFG_TUSB_RHPORT1_MODE - #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE -#endif +//#ifndef CFG_TUSB_RHPORT0_MODE +// #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE +//#endif +// +//#ifndef CFG_TUSB_RHPORT1_MODE +// #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE +//#endif -#if (((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST ) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST )) || \ - (((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE)) - #error "TinyUSB currently does not support same modes on more than 1 roothub port" -#endif -//------------- Roothub as Device -------------// - -#if (CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE +#if defined(CFG_TUSB_RHPORT0_MODE) && ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) #define TUD_RHPORT_MODE (CFG_TUSB_RHPORT0_MODE) #define TUD_OPT_RHPORT 0 -#elif (CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE +#elif defined(CFG_TUSB_RHPORT1_MODE) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE) #define TUD_RHPORT_MODE (CFG_TUSB_RHPORT1_MODE) #define TUD_OPT_RHPORT 1 #else @@ -222,21 +218,24 @@ typedef int make_iso_compilers_happy ; #endif #ifndef CFG_TUD_ENABLED -#define CFG_TUD_ENABLED (TUD_RHPORT_MODE & OPT_MODE_DEVICE) + // fallback to use CFG_TUSB_RHPORTx_MODE + #define CFG_TUD_ENABLED (TUD_RHPORT_MODE & OPT_MODE_DEVICE) #endif -#if CFG_TUD_ENABLED - #define TUD_OPT_HIGH_SPEED ((TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (TUP_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT))) -#else - #define TUD_OPT_HIGH_SPEED 0 +#ifndef CFG_TUD_MAX_SPEED + // fallback to use CFG_TUSB_RHPORTx_MODE + #define CFG_TUD_MAX_SPEED (TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) #endif +// highspeed support indicator +#define TUD_OPT_HIGH_SPEED (CFG_TUD_MAX_SPEED ? CFG_TUD_MAX_SPEED : TUP_RHPORT_HIGHSPEED) + //------------- Roothub as Host -------------// -#if (CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST +#if defined(CFG_TUSB_RHPORT0_MODE) && ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST) #define TUH_RHPORT_MODE (CFG_TUSB_RHPORT0_MODE) #define TUH_OPT_RHPORT 0 -#elif (CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST +#elif defined(CFG_TUSB_RHPORT1_MODE) && ((CFG_TUSB_RHPORT1_MODE) & OPT_MODE_HOST) #define TUH_RHPORT_MODE (CFG_TUSB_RHPORT1_MODE) #define TUH_OPT_RHPORT 1 #else @@ -244,7 +243,10 @@ typedef int make_iso_compilers_happy ; #define TUH_OPT_RHPORT -1 #endif -#define CFG_TUH_ENABLED (TUH_RHPORT_MODE & OPT_MODE_HOST) +#ifndef CFG_TUH_ENABLED + // fallback to use CFG_TUSB_RHPORTx_MODE + #define CFG_TUH_ENABLED (TUH_RHPORT_MODE & OPT_MODE_HOST) +#endif // For backward compatible #define TUSB_OPT_DEVICE_ENABLED CFG_TUD_ENABLED -- cgit v1.3.1 From 2571211957b28be7fd706d3cdd4209f17189788a Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 Jun 2022 11:32:09 +0700 Subject: remove static port defined for device/host --- examples/device/cdc_msc/src/main.c | 4 +++- hw/bsp/lpc18/family.c | 4 ++-- src/tusb.c | 10 ++++++---- src/tusb_option.h | 12 +----------- 4 files changed, 12 insertions(+), 18 deletions(-) (limited to 'hw') diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 131ae6549..c3666763b 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -54,7 +54,9 @@ void cdc_task(void); int main(void) { board_init(); - tusb_init(); + + // init device stack on configured roothub port + tud_init(BOARD_TUD_RHPORT); while (1) { diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index a59b6e89d..0fc788873 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -96,8 +96,8 @@ void board_init(void) SysTick_Config(SystemCoreClock / 1000); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); - NVIC_SetPriority(USB1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif Chip_GPIO_Init(LPC_GPIO_PORT); diff --git a/src/tusb.c b/src/tusb.c index c86bdd891..709bb7d48 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -38,12 +38,14 @@ bool tusb_init(void) { -#if CFG_TUD_ENABLED - TU_ASSERT ( tud_init(TUD_OPT_RHPORT) ); // init device stack +#if CFG_TUD_ENABLED && defined(TUD_OPT_RHPORT) + // init device stack CFG_TUSB_RHPORTx_MODE must be defined + TU_ASSERT ( tud_init(TUD_OPT_RHPORT) ); #endif -#if CFG_TUH_ENABLED - TU_ASSERT( tuh_init(TUH_OPT_RHPORT) ); // init host stack +#if CFG_TUH_ENABLED && defined(TUH_OPT_RHPORT) + // init host stack CFG_TUSB_RHPORTx_MODE must be defined + TU_ASSERT( tuh_init(TUH_OPT_RHPORT) ); #endif return true; diff --git a/src/tusb_option.h b/src/tusb_option.h index c198e4ef3..0a0b20dca 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -197,15 +197,6 @@ typedef int make_iso_compilers_happy ; //------------- Roothub as Device -------------// -//#ifndef CFG_TUSB_RHPORT0_MODE -// #define CFG_TUSB_RHPORT0_MODE OPT_MODE_NONE -//#endif -// -//#ifndef CFG_TUSB_RHPORT1_MODE -// #define CFG_TUSB_RHPORT1_MODE OPT_MODE_NONE -//#endif - - #if defined(CFG_TUSB_RHPORT0_MODE) && ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) #define TUD_RHPORT_MODE (CFG_TUSB_RHPORT0_MODE) #define TUD_OPT_RHPORT 0 @@ -214,7 +205,6 @@ typedef int make_iso_compilers_happy ; #define TUD_OPT_RHPORT 1 #else #define TUD_RHPORT_MODE OPT_MODE_NONE - #define TUD_OPT_RHPORT -1 #endif #ifndef CFG_TUD_ENABLED @@ -228,7 +218,7 @@ typedef int make_iso_compilers_happy ; #endif // highspeed support indicator -#define TUD_OPT_HIGH_SPEED (CFG_TUD_MAX_SPEED ? CFG_TUD_MAX_SPEED : TUP_RHPORT_HIGHSPEED) +#define TUD_OPT_HIGH_SPEED (CFG_TUD_MAX_SPEED ? CFG_TUD_MAX_SPEED : TUP_RHPORT_HIGHSPEED) //------------- Roothub as Host -------------// -- cgit v1.3.1 From 7187cd9a8528bfe2b570567ca2d0a2ae36b7c478 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 6 Jun 2022 12:51:10 +0700 Subject: fix ci, remove use of CFG_TUSB_RHPORT0_MODE in bsp --- hw/bsp/ea4088qs/ea4088qs.c | 6 ++--- hw/bsp/ea4357/ea4357.c | 36 ++++++++++++++++++++---------- hw/bsp/fomu/fomu.c | 2 +- hw/bsp/imxrt/family.c | 38 +++++++++++++++++++++++--------- hw/bsp/lpc54/family.c | 19 +++++++++++----- hw/bsp/lpc55/family.c | 16 ++++++++++++-- hw/bsp/lpcxpresso1769/lpcxpresso1769.c | 8 +++---- hw/bsp/mbed1768/mbed1768.c | 8 +++---- hw/bsp/ngx4330/ngx4330.c | 35 +++++++++++++++++------------ hw/bsp/samg55xplained/samg55xplained.c | 2 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 2 +- 11 files changed, 114 insertions(+), 58 deletions(-) (limited to 'hw') diff --git a/hw/bsp/ea4088qs/ea4088qs.c b/hw/bsp/ea4088qs/ea4088qs.c index b25f9101c..fa905b2f9 100644 --- a/hw/bsp/ea4088qs/ea4088qs.c +++ b/hw/bsp/ea4088qs/ea4088qs.c @@ -32,11 +32,11 @@ //--------------------------------------------------------------------+ void USB_IRQHandler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + #if CFG_TUD_ENABLED tuh_int_handler(0); #endif - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + #if CFG_TUH_ENABLED tud_int_handler(0); #endif } @@ -115,7 +115,7 @@ void board_init(void) SysTick_Config(SystemCoreClock / 1000); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif Chip_GPIO_Init(LPC_GPIO); diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index aa206a28d..2c1d08770 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -53,6 +53,18 @@ // {0x02, 7, 0, 7 }, // SW6 //}; +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + /*------------------------------------------------------------------*/ /* BOARD API *------------------------------------------------------------------*/ @@ -116,7 +128,7 @@ void board_init(void) SysTick_Config(SystemCoreClock / 1000); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif Chip_GPIO_Init(LPC_GPIO_PORT); @@ -170,7 +182,7 @@ void board_init(void) * - Insert jumpers in position 2-3 in JP17/JP18/JP19 * - Insert jumpers in JP31 (OTG) */ -#if CFG_TUSB_RHPORT0_MODE +#if PORT_SUPPORT_DEVICE(0) || PORT_SUPPORT_HOST(0) Chip_USB0_Init(); #endif @@ -195,14 +207,14 @@ void board_init(void) * - LED34 lights green when +5V is available on J20. * - JP15 shall not be inserted. JP16 has no effect */ -#if CFG_TUSB_RHPORT1_MODE +#if PORT_SUPPORT_DEVICE(1) || PORT_SUPPORT_HOST(1) Chip_USB1_Init(); #endif // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + #if PORT_SUPPORT_DEVICE(0) // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); @@ -217,23 +229,23 @@ void board_init(void) //--------------------------------------------------------------------+ void USB0_IRQHandler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); #endif - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0); #endif } void USB1_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1); #endif } diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c index 12b7bfd18..33c630303 100644 --- a/hw/bsp/fomu/fomu.c +++ b/hw/bsp/fomu/fomu.c @@ -61,7 +61,7 @@ void isr(void) irqs = irq_pending() & irq_getmask(); -#if CFG_TUSB_RHPORT0_MODE == OPT_MODE_DEVICE +#if CFG_TUD_ENABLED if (irqs & (1 << USB_INTERRUPT)) { tud_int_handler(0); } diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 8d34d4b9f..e5f630108 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -34,9 +34,25 @@ #include "clock_config.h" +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + // needed by fsl_flexspi_nor_boot const uint8_t dcd_data[] = { 0x00 }; +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + void board_init(void) { // Init clock @@ -51,9 +67,9 @@ void board_init(void) SysTick_Config(SystemCoreClock / 1000); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_OTG1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#ifdef USB_OTG2_IRQn - NVIC_SetPriority(USB_OTG2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB_OTG1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#ifdef USBPHY2 + NVIC_SetPriority(USB_OTG2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif #endif @@ -149,23 +165,23 @@ void board_init(void) //--------------------------------------------------------------------+ void USB_OTG1_IRQHandler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); #endif - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0); #endif } void USB_OTG2_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1); #endif } diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 4f1199c3a..9bb341e73 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -33,6 +33,18 @@ #include "bsp/board.h" #include "board.h" +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ @@ -152,8 +164,7 @@ void board_init(void) #if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT // LPC546xx and LPC540xx has OTG 1 FS + 1 HS rhports - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + #if PORT_SUPPORT_DEVICE(0) // Port0 is Full Speed POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); /*< Turn on USB Phy */ CLOCK_SetClkDiv(kCLOCK_DivUsb0Clk, 1, false); @@ -167,7 +178,7 @@ void board_init(void) CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbSrcFro, CLOCK_GetFroHfFreq()); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + #if PORT_SUPPORT_DEVICE(1) // Port1 is High Speed POWER_DisablePD(kPDRUNCFG_PD_USB1_PHY); @@ -178,10 +189,8 @@ void board_init(void) CLOCK_EnableUsbhs0DeviceClock(kCLOCK_UsbSrcUsbPll, 0U); #endif - #else // LPC5411x series only has full speed device - POWER_DisablePD(kPDRUNCFG_PD_USB0_PHY); // Turn on USB Phy CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); /* enable USB IP clock */ #endif diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index f037a9f5b..e7aed5759 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -34,6 +34,18 @@ #include "fsl_sctimer.h" #include "sct_neopixel.h" +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ @@ -164,7 +176,7 @@ void board_init(void) /* PORT0 PIN22 configured as USB0_VBUS */ IOCON_PinMuxSet(IOCON, 0U, 22U, IOCON_PIO_DIG_FUNC7_EN); -#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE +#if PORT_SUPPORT_DEVICE(0) // Port0 is Full Speed /* Turn on USB0 Phy */ @@ -189,7 +201,7 @@ void board_init(void) CLOCK_EnableUsbfs0DeviceClock(kCLOCK_UsbfsSrcFro, CLOCK_GetFreq(kCLOCK_FroHf)); #endif -#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE +#if PORT_SUPPORT_DEVICE(1) // Port1 is High Speed /* Turn on USB1 Phy */ diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c index b82e5ffe0..b7bce93d2 100644 --- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c @@ -32,12 +32,12 @@ //--------------------------------------------------------------------+ void USB_IRQHandler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); + #if CFG_TUD_ENABLED + tud_int_handler(0); #endif - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); + #if CFG_TUH_ENABLED + tuh_int_handler(0); #endif } diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c index 7c2b37016..08cf3adbd 100644 --- a/hw/bsp/mbed1768/mbed1768.c +++ b/hw/bsp/mbed1768/mbed1768.c @@ -146,12 +146,12 @@ void board_init(void) //--------------------------------------------------------------------+ void USB_IRQHandler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); + #if CFG_TUD_ENABLED + tud_int_handler(0); #endif - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); + #if CFG_TUH_ENABLED + tuh_int_handler(0); #endif } diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index b63f9b894..4fc314165 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -40,6 +40,18 @@ #define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD #define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + /*------------------------------------------------------------------*/ /* BOARD API *------------------------------------------------------------------*/ @@ -120,7 +132,7 @@ void board_init(void) SysTick_Config(SystemCoreClock / 1000); #elif CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif Chip_GPIO_Init(LPC_GPIO_PORT); @@ -167,9 +179,7 @@ void board_init(void) * status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down * resistors are always active */ -#if CFG_TUSB_RHPORT0_MODE Chip_USB0_Init(); -#endif /* USB1 * When USB channel #1 is used as USB Host, 15Kohm pull-down resistors are needed on the USB data @@ -189,12 +199,9 @@ void board_init(void) * of VBUS can be read via U31. * JP16 shall not be inserted. */ -#if CFG_TUSB_RHPORT1_MODE Chip_USB1_Init(); - // Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6); /* GPIO5[6] = USB1_PWR_EN */ // Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true); /* GPIO5[6] output high */ -#endif } //--------------------------------------------------------------------+ @@ -202,23 +209,23 @@ void board_init(void) //--------------------------------------------------------------------+ void USB0_IRQHandler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); #endif - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0); #endif } void USB1_IRQHandler(void) { - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); #endif - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1); #endif } diff --git a/hw/bsp/samg55xplained/samg55xplained.c b/hw/bsp/samg55xplained/samg55xplained.c index ed106b06b..027c88e2f 100644 --- a/hw/bsp/samg55xplained/samg55xplained.c +++ b/hw/bsp/samg55xplained/samg55xplained.c @@ -99,7 +99,7 @@ void board_init(void) //--------------------------------------------------------------------+ void UDP_Handler(void) { - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + #if CFG_TUD_ENABLED tud_int_handler(0); #endif } diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 7a65cf5d0..2445593fe 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -312,7 +312,7 @@ static void _dcd_ft90x_detach(void) // Determine the speed of the USB to which we are connected. // Set the speed of the PHY accordingly. -// High speed can be disabled through CFG_TUSB_RHPORT0_MODE settings. +// High speed can be disabled through CFG_TUSB_RHPORT0_MODE or CFG_TUD_MAX_SPEED settings. static void _ft90x_usb_speed(void) { uint8_t fctrl_val; -- cgit v1.3.1 From 1b086729452c67e3e78a736506732ca013959572 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 6 Jun 2022 13:25:48 +0700 Subject: more ci fix --- hw/bsp/imxrt/family.c | 4 ++-- src/portable/synopsys/dwc2/dwc2_stm32.h | 5 ++++- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'hw') diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index e5f630108..fc6e9e266 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -34,13 +34,13 @@ #include "clock_config.h" -#ifdef BOARD_TUD_RHPORT +#if defined(BOARD_TUD_RHPORT) && CFG_TUD_ENABLED #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) #else #define PORT_SUPPORT_DEVICE(_n) 0 #endif -#ifdef BOARD_TUH_RHPORT +#if defined(BOARD_TUH_RHPORT) && CFG_TUH_ENABLED #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) #else #define PORT_SUPPORT_HOST(_n) 0 diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 709428f7f..b500ddc46 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -47,6 +47,7 @@ #include "stm32f4xx.h" #define EP_MAX_FS USB_OTG_FS_MAX_IN_ENDPOINTS #define EP_FIFO_SIZE_FS USB_OTG_FS_TOTAL_FIFO_SIZE + #define EP_MAX_HS USB_OTG_HS_MAX_IN_ENDPOINTS #define EP_FIFO_SIZE_HS USB_OTG_HS_TOTAL_FIFO_SIZE @@ -54,6 +55,7 @@ #include "stm32h7xx.h" #define EP_MAX_FS 9 #define EP_FIFO_SIZE_FS 4096 + #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 @@ -64,6 +66,7 @@ #include "stm32f7xx.h" #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 + #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 @@ -77,7 +80,7 @@ #endif // OTG HS always has higher number of endpoints than FS -#ifdef EP_MAX_HS +#ifdef USB_OTG_HS_PERIPH_BASE #define DWC2_EP_MAX EP_MAX_HS #else #define DWC2_EP_MAX EP_MAX_FS -- cgit v1.3.1 From 8cbc34de11ccaaf0831cda14ad703d8d962ae725 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 8 Jun 2022 01:17:01 +0700 Subject: add tuh_configure() for port/dynamic host behavior config --- hw/bsp/rp2040/family.c | 16 +++++++++-- src/device/usbd.c | 2 +- src/host/hcd.h | 5 +++- src/host/usbh.c | 39 ++++++++++++++++---------- src/host/usbh.h | 16 +++++++++-- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 12 ++++++-- 6 files changed, 67 insertions(+), 23 deletions(-) (limited to 'hw') diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 8de1c1aab..68c9e2d52 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -35,6 +35,13 @@ #include "bsp/board.h" #include "board.h" +#if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB +#include "pio_usb.h" +#endif + +// PIO_USB_DP_PIN_DEFAULT is 0, which conflict with UART, change to 2 +#define PICO_PIO_USB_PIN_DP 2 + #ifdef BUTTON_BOOTSEL // This example blinks the Picoboard LED when the BOOTSEL button is pressed. // @@ -130,6 +137,12 @@ void board_init(void) #if CFG_TUH_RPI_PIO_USB || CFG_TUD_RPI_PIO_USB // Set the system clock to a multiple of 120mhz for bitbanging USB with pico-usb set_sys_clock_khz(120000, true); + + // rp2040 use pico-pio-usb for host tuh_configure() can be used to passed pio configuration to the host stack + // Note: tuh_configure() must be called before tuh_init() + pio_usb_configuration_t pio_cfg = PIO_USB_DEFAULT_CONFIG; + pio_cfg.pin_dp = PICO_PIO_USB_PIN_DP; + tuh_configure(BOARD_TUH_RHPORT, TUH_CFGID_RPI_PIO_USB_CONFIGURATION, &pio_cfg); #endif #if defined(UART_DEV) && defined(LIB_PICO_STDIO_UART) @@ -142,9 +155,8 @@ void board_init(void) stdio_rtt_init(); #endif - // todo probably set up device mode? #if CFG_TUD_ENABLED - + // TODO probably set up device mode? #endif #if CFG_TUH_ENABLED diff --git a/src/device/usbd.c b/src/device/usbd.c index 55e478a4e..697477584 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -392,7 +392,7 @@ bool tud_init (uint8_t rhport) // skip if already initialized if ( tud_inited() ) return true; - TU_LOG2("USBD init\r\n"); + TU_LOG2("USBD init rhport %u\r\n", rhport); TU_LOG2_INT(sizeof(usbd_device_t)); tu_varclr(&_usbd_dev); diff --git a/src/host/hcd.h b/src/host/hcd.h index 036394c72..2bc85034f 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -48,7 +48,7 @@ // #endif #endif - //--------------------------------------------------------------------+ +//--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ typedef enum @@ -106,6 +106,9 @@ typedef struct // Controller API //--------------------------------------------------------------------+ +// optional hcd configuration, called by tuh_config() +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_ATTR_WEAK; + // Initialize controller to host mode bool hcd_init(uint8_t rhport); diff --git a/src/host/usbh.c b/src/host/usbh.c index e0e41a8d1..ab2d8770a 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -274,9 +274,32 @@ static void process_device_unplugged(uint8_t rhport, uint8_t hub_addr, uint8_t h static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); +#if CFG_TUSB_OS == OPT_OS_NONE +// TODO rework time-related function later +void osal_task_delay(uint32_t msec) +{ + (void) msec; + + const uint32_t start = hcd_frame_number(TUH_OPT_RHPORT); + while ( ( hcd_frame_number(TUH_OPT_RHPORT) - start ) < msec ) {} +} +#endif + //--------------------------------------------------------------------+ // PUBLIC API (Parameter Verification is required) //--------------------------------------------------------------------+ + +bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) +{ + if (hcd_configure) + { + return hcd_configure(rhport, cfg_id, cfg_param); + }else + { + return false; + } +} + bool tuh_mounted(uint8_t dev_addr) { usbh_device_t* dev = get_device(dev_addr); @@ -303,20 +326,6 @@ tusb_speed_t tuh_speed_get (uint8_t dev_addr) return (tusb_speed_t) (dev ? get_device(dev_addr)->speed : _dev0.speed); } -#if CFG_TUSB_OS == OPT_OS_NONE -void osal_task_delay(uint32_t msec) -{ - (void) msec; - - const uint32_t start = hcd_frame_number(TUH_OPT_RHPORT); - while ( ( hcd_frame_number(TUH_OPT_RHPORT) - start ) < msec ) {} -} -#endif - -//--------------------------------------------------------------------+ -// CLASS-USBD API (don't require to verify parameters) -//--------------------------------------------------------------------+ - static void clear_device(usbh_device_t* dev) { tu_memclr(dev, sizeof(usbh_device_t)); @@ -334,7 +343,7 @@ bool tuh_init(uint8_t rhport) // skip if already initialized if (_usbh_initialized) return _usbh_initialized; - TU_LOG2("USBH init\r\n"); + TU_LOG2("USBH init rhport %u\r\n", rhport); TU_LOG2_INT(sizeof(usbh_device_t)); TU_LOG2_INT(sizeof(hcd_event_t)); TU_LOG2_INT(sizeof(_ctrl_xfer)); diff --git a/src/host/usbh.h b/src/host/usbh.h index c6d36fb7f..4c65da206 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -46,8 +46,8 @@ typedef void (*tuh_xfer_cb_t)(tuh_xfer_t* xfer); // Note1: layout and order of this will be changed in near future // it is advised to initialize it using member name -// Note2: not all field is available/meaningful in callback, some info is not saved by -// usbh to save SRAM +// Note2: not all field is available/meaningful in callback, +// some info is not saved by usbh to save SRAM struct tuh_xfer_s { uint8_t daddr; @@ -69,6 +69,12 @@ struct tuh_xfer_s // uint32_t timeout_ms; // place holder, not supported yet }; +// ConfigID for tuh_config() +enum +{ + TUH_CFGID_RPI_PIO_USB_CONFIGURATION = OPT_MCU_RP2040 // cfg_param: pio_usb_configuration_t +}; + //--------------------------------------------------------------------+ // APPLICATION CALLBACK //--------------------------------------------------------------------+ @@ -85,6 +91,12 @@ TU_ATTR_WEAK void tuh_umount_cb(uint8_t daddr); // APPLICATION API //--------------------------------------------------------------------+ +// Configure host stack behavior with dynamic or port-specific parameters. +// Should be called before tuh_init() +// - cfg_id : configure ID (TBD) +// - cfg_param: configure data, structure depends on the ID +bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); + // Init host stack bool tuh_init(uint8_t rhport); diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 1b2d29331..58b153ac3 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -43,17 +43,25 @@ #define RHPORT_OFFSET 1 #define RHPORT_PIO(_x) ((_x)-RHPORT_OFFSET) -static pio_usb_configuration_t pio_host_config = PIO_USB_DEFAULT_CONFIG; +static pio_usb_configuration_t pio_host_cfg = PIO_USB_DEFAULT_CONFIG; //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) +{ + (void) rhport; + TU_VERIFY(cfg_id == TUH_CFGID_RPI_PIO_USB_CONFIGURATION); + memcpy(&pio_host_cfg, cfg_param, sizeof(pio_usb_configuration_t)); + return true; +} + bool hcd_init(uint8_t rhport) { (void) rhport; // To run USB SOF interrupt in core1, call this init in core1 - pio_usb_host_init(&pio_host_config); + pio_usb_host_init(&pio_host_cfg); return true; } -- cgit v1.3.1 From 2f7f3e604eb2641dd87a524ab282939bda6b3348 Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Fri, 17 Jun 2022 12:54:28 -0500 Subject: Re-add some warning suppression for rp2040 --- hw/bsp/rp2040/family.cmake | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'hw') diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index df3a6a91e..ed7041e4e 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -232,6 +232,25 @@ if (NOT TARGET _rp2040_family_inclusion_marker) # This method must be called from the project scope to suppress known warnings in TinyUSB source files function(suppress_tinyusb_warnings) - # there are currently no warnings to suppress, however this function must still exist + set_source_files_properties( + ${PICO_TINYUSB_PATH}/src/device/usbd.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion") + set_source_files_properties( + ${PICO_TINYUSB_PATH}/src/device/usbd_control.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion") + set_source_files_properties( + ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion") + set_source_files_properties( + ${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion") + set_source_files_properties( + ${PICO_TINYUSB_PATH}/src/tusb.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion") endfunction() endif() -- cgit v1.3.1 From 742b99f6894ae2b4643c96790e51726e4ba9dc58 Mon Sep 17 00:00:00 2001 From: caleb crome Date: Tue, 21 Jun 2022 11:12:39 -0700 Subject: Added The Teensy 4.1 board The Teensy 4.1 board has an 8MB W25Q64JV as opposed to the 2MB flash on the Teensy 4.0. This largely doensn't matter for TinyUsb, except when you attempt to access any memory in the flash above the 2MB boundary, when it fails with a hard fault. --- hw/bsp/imxrt/boards/teensy_41/board.h | 52 ++++ hw/bsp/imxrt/boards/teensy_41/board.mk | 10 + .../boards/teensy_41/teensy41_flexspi_nor_config.c | 49 ++++ .../boards/teensy_41/teensy41_flexspi_nor_config.h | 268 +++++++++++++++++++++ 4 files changed, 379 insertions(+) create mode 100644 hw/bsp/imxrt/boards/teensy_41/board.h create mode 100644 hw/bsp/imxrt/boards/teensy_41/board.mk create mode 100644 hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c create mode 100644 hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h (limited to 'hw') diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h new file mode 100644 index 000000000..b0b4931c7 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (8 * 1024 * 1024) + +// LED +#define LED_PINMUX IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13 +#define LED_PORT GPIO2 +#define LED_PIN 3 +#define LED_STATE_ON 0 + +// no button +#define BUTTON_PINMUX IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12 +#define BUTTON_PORT GPIO2 +#define BUTTON_PIN 1 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART6 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_03_LPUART6_RX // D0 +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_02_LPUART6_TX // D1 + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/imxrt/boards/teensy_41/board.mk b/hw/bsp/imxrt/boards/teensy_41/board.mk new file mode 100644 index 000000000..0ad5ea5c0 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/board.mk @@ -0,0 +1,10 @@ +CFLAGS += -DCPU_MIMXRT1062DVL6A +MCU_VARIANT = MIMXRT1062 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1062xxx6A + +# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli +# Make sure it is in your PATH +flash: $(BUILD)/$(PROJECT).hex + teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c new file mode 100644 index 000000000..2d2bf8f09 --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 8u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h new file mode 100644 index 000000000..56068ec6a --- /dev/null +++ b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __TEENSY40_FLEXSPI_NOR_CONFIG__ +#define __TEENSY40_FLEXSPI_NOR_CONFIG__ + +#include +#include +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, + kFlexSpiSerialClk_166MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ -- cgit v1.3.1 From 4f6e770eda9f8c605b238f35def1edaff93a8fb8 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Jun 2022 19:45:49 +0700 Subject: add more warning option, also fix -Wconversion with rp2040 -Wuninitialized, -Wunused, -Wredundant-decls --- examples/device/cdc_msc/src/usb_descriptors.c | 2 +- examples/make.mk | 7 ++++- hw/bsp/broadcom_32bit/family.mk | 2 +- hw/bsp/broadcom_64bit/family.mk | 2 +- hw/bsp/imxrt/family.mk | 2 +- hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c | 1 - hw/bsp/nrf/family.mk | 3 ++ hw/bsp/rx/family.mk | 3 ++ hw/bsp/samd21/family.mk | 2 +- hw/bsp/saml2x/family.mk | 2 +- hw/mcu/raspberry_pi/Pico-PIO-USB | 2 +- src/class/cdc/cdc_device.c | 6 ++-- src/class/msc/msc_device.c | 33 +++++++++++----------- src/common/tusb_fifo.c | 12 ++++---- src/device/usbd.c | 16 +++++++---- src/device/usbd_control.c | 2 +- src/portable/synopsys/dwc2/dwc2_stm32.h | 3 +- 17 files changed, 58 insertions(+), 42 deletions(-) (limited to 'hw') diff --git a/examples/device/cdc_msc/src/usb_descriptors.c b/examples/device/cdc_msc/src/usb_descriptors.c index 09894cf1b..6b59ed50f 100644 --- a/examples/device/cdc_msc/src/usb_descriptors.c +++ b/examples/device/cdc_msc/src/usb_descriptors.c @@ -282,7 +282,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/make.mk b/examples/make.mk index bed46d02b..26065c027 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -108,8 +108,13 @@ CFLAGS += \ -Wcast-align \ -Wcast-function-type \ -Wcast-qual \ - -Wnull-dereference + -Wnull-dereference \ + -Wuninitialized \ + -Wunused \ + -Wredundant-decls +# -Wconversion \ + # Debugging/Optimization ifeq ($(DEBUG), 1) CFLAGS += -Og diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk index 98744c5d0..cf68e21ee 100644 --- a/hw/bsp/broadcom_32bit/family.mk +++ b/hw/bsp/broadcom_32bit/family.mk @@ -16,7 +16,7 @@ CFLAGS += \ CROSS_COMPILE = arm-none-eabi- # mcu driver cause following warnings -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/broadcom_64bit/family.mk b/hw/bsp/broadcom_64bit/family.mk index 723926734..97af6d64a 100644 --- a/hw/bsp/broadcom_64bit/family.mk +++ b/hw/bsp/broadcom_64bit/family.mk @@ -15,7 +15,7 @@ CFLAGS += \ CROSS_COMPILE = aarch64-none-elf- # mcu driver cause following warnings -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index c81e67eb6..0a55b740b 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -23,7 +23,7 @@ CFLAGS += -DBOARD_TUH_RHPORT=$(BOARD_TUH_RHPORT) endif # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough= +CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough -Wno-error=redundant-decls MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT) diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c index cff7bc15e..9793ba241 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c @@ -52,7 +52,6 @@ void USB_DeviceClockInit (void) //--------------------------------------------------------------------+ // LED -void board_led_write (bool state); extern u32 SystemCoreClock; const int baudrate = 115200; diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index d8283a9e6..609e2da0b 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -16,6 +16,9 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual +# warning caused by dcd_nrf5x.c due to include of usbd.h and re-declare of dcd_int_handler() +CFLAGS += -Wno-error=redundant-decls + # All source paths should be relative to the top level. LD_FILE ?= hw/bsp/nrf/boards/$(BOARD)/nrf52840_s140_v6.ld diff --git a/hw/bsp/rx/family.mk b/hw/bsp/rx/family.mk index aba05812d..f4f8ae088 100644 --- a/hw/bsp/rx/family.mk +++ b/hw/bsp/rx/family.mk @@ -13,6 +13,9 @@ CFLAGS += \ -mlittle-endian-data \ -DSSIZE_MAX=__INT_MAX__ +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=redundant-decls + SRC_C += \ src/portable/renesas/usba/dcd_usba.c \ src/portable/renesas/usba/hcd_usba.c \ diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk index 208f23789..95421e753 100644 --- a/hw/bsp/samd21/family.mk +++ b/hw/bsp/samd21/family.mk @@ -13,7 +13,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMD21 # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index bb1faeb7f..afb0afc03 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -14,7 +14,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAML22 # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ diff --git a/hw/mcu/raspberry_pi/Pico-PIO-USB b/hw/mcu/raspberry_pi/Pico-PIO-USB index 2a9fefd6c..92bd3b4c3 160000 --- a/hw/mcu/raspberry_pi/Pico-PIO-USB +++ b/hw/mcu/raspberry_pi/Pico-PIO-USB @@ -1 +1 @@ -Subproject commit 2a9fefd6ccf42e5d8570ae83fdc54c9c875ebdd1 +Subproject commit 92bd3b4c3ad2fce36166e4a357749b6d4fe9013b diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 7aa7a4860..fab6f0035 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -145,7 +145,7 @@ uint32_t tud_cdc_n_available(uint8_t itf) uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, bufsize); + uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) bufsize); _prep_out_transaction(p_cdc); return num_read; } @@ -168,7 +168,7 @@ void tud_cdc_n_read_flush (uint8_t itf) uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, bufsize); + uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) bufsize); // flush if queue more than packet size if ( tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE ) @@ -435,7 +435,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ // Received new data if ( ep_addr == p_cdc->ep_out ) { - tu_fifo_write_n(&p_cdc->rx_ff, &p_cdc->epout_buf, xferred_bytes); + tu_fifo_write_n(&p_cdc->rx_ff, &p_cdc->epout_buf, (uint16_t) xferred_bytes); // Check for wanted char and invoke callback if needed if ( tud_cdc_rx_wanted_cb && (((signed char) p_cdc->wanted_char) != -1) ) diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 3facb76d6..33dd4ac37 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -463,7 +463,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { // Didn't check for case 9 (Ho > Dn), which requires examining scsi command first // but it is OK to just receive data then responded with failed status - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_buf, p_msc->total_len) ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_buf, (uint16_t) p_msc->total_len) ); } }else { @@ -473,7 +473,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // Invoke user callback if not built-in if ( (resplen < 0) && (p_msc->sense_key == 0) ) { - resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, p_msc->total_len); + resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, (uint16_t) p_msc->total_len); } if ( resplen < 0 ) @@ -506,7 +506,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { // cannot return more than host expect p_msc->total_len = tu_min32((uint32_t) resplen, p_cbw->total_bytes); - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, p_msc->total_len) ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, (uint16_t) p_msc->total_len) ); } } } @@ -541,7 +541,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // OUT transfer, invoke callback if needed if ( !is_data_in(p_cbw->dir) ) { - int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, p_msc->total_len); + int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, (uint16_t) p_msc->total_len); if ( cb_result < 0 ) { @@ -707,7 +707,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ read_capa10.block_size = tu_htonl(block_size); resplen = sizeof(read_capa10); - memcpy(buffer, &read_capa10, resplen); + memcpy(buffer, &read_capa10, (size_t) resplen); } } break; @@ -741,7 +741,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ read_fmt_capa.block_size_u16 = tu_htons(block_size); resplen = sizeof(read_fmt_capa); - memcpy(buffer, &read_fmt_capa, resplen); + memcpy(buffer, &read_fmt_capa, (size_t) resplen); } } break; @@ -764,7 +764,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ tud_msc_inquiry_cb(lun, inquiry_rsp.vendor_id, inquiry_rsp.product_id, inquiry_rsp.product_rev); resplen = sizeof(inquiry_rsp); - memcpy(buffer, &inquiry_rsp, resplen); + memcpy(buffer, &inquiry_rsp, (size_t) resplen); } break; @@ -788,7 +788,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ mode_resp.write_protected = !writable; resplen = sizeof(mode_resp); - memcpy(buffer, &mode_resp, resplen); + memcpy(buffer, &mode_resp, (size_t) resplen); } break; @@ -801,17 +801,17 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ }; sense_rsp.add_sense_len = sizeof(scsi_sense_fixed_resp_t) - 8; - sense_rsp.sense_key = p_msc->sense_key; + sense_rsp.sense_key = (uint8_t) (p_msc->sense_key & 0x0F); sense_rsp.add_sense_code = p_msc->add_sense_code; sense_rsp.add_sense_qualifier = p_msc->add_sense_qualifier; resplen = sizeof(sense_rsp); - memcpy(buffer, &sense_rsp, resplen); + memcpy(buffer, &sense_rsp, (size_t) resplen); // request sense callback could overwrite the sense data if (tud_msc_request_sense_cb) { - resplen = tud_msc_request_sense_cb(lun, buffer, bufsize); + resplen = tud_msc_request_sense_cb(lun, buffer, (uint16_t) bufsize); } // Clear sense data after copy @@ -859,7 +859,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) } else { - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, nbytes), ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, (uint16_t) nbytes), ); } } @@ -883,7 +883,7 @@ static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc) } // remaining bytes capped at class buffer - int32_t nbytes = (int32_t) tu_min32(sizeof(_mscd_buf), p_cbw->total_bytes-p_msc->xferred_len); + uint16_t nbytes = (uint16_t) tu_min32(sizeof(_mscd_buf), p_cbw->total_bytes-p_msc->xferred_len); // Write10 callback will be called later when usb transfer complete TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_buf, nbytes), ); @@ -921,14 +921,15 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 // Application consume less than what we got (including zero) if ( (uint32_t) nbytes < xferred_bytes ) { + uint32_t const left_over = xferred_bytes - (uint32_t) nbytes; if ( nbytes > 0 ) { - p_msc->xferred_len += nbytes; - memmove(_mscd_buf, _mscd_buf+nbytes, xferred_bytes-nbytes); + p_msc->xferred_len += (uint16_t) nbytes; + memmove(_mscd_buf, _mscd_buf+nbytes, left_over); } // simulate an transfer complete with adjusted parameters --> callback will be invoked with adjusted parameter - dcd_event_xfer_complete(rhport, p_msc->ep_out, xferred_bytes-nbytes, XFER_RESULT_SUCCESS, false); + dcd_event_xfer_complete(rhport, p_msc->ep_out, left_over, XFER_RESULT_SUCCESS, false); } else { diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 183c9c6fc..895b9208b 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -79,7 +79,7 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Limit index space to 2*depth - this allows for a fast "modulo" calculation // but limits the maximum depth to 2^16/2 = 2^15 and buffer overflows are detectable // only if overflow happens once (important for unsupervised DMA applications) - f->max_pointer_idx = 2*depth - 1; + f->max_pointer_idx = (uint16_t) (2*depth - 1); f->non_used_index_space = UINT16_MAX - f->max_pointer_idx; f->rd_idx = f->wr_idx = 0; @@ -205,7 +205,7 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t uint8_t rem = nLin_bytes & 0x03; if (rem > 0) { - uint8_t remrem = tu_min16(nWrap_bytes, 4-rem); + uint8_t remrem = (uint8_t) tu_min16(nWrap_bytes, 4-rem); nWrap_bytes -= remrem; uint32_t tmp32 = *rx_fifo; @@ -288,7 +288,7 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rel, tu uint8_t rem = nLin_bytes & 0x03; if (rem > 0) { - uint8_t remrem = tu_min16(nWrap_bytes, 4-rem); + uint8_t remrem = (uint8_t) tu_min16(nWrap_bytes, 4-rem); nWrap_bytes -= remrem; uint32_t tmp32=0; @@ -325,7 +325,7 @@ static uint16_t advance_pointer(tu_fifo_t* f, uint16_t p, uint16_t offset) // We are exploiting the wrap around to the correct index if ((p > (uint16_t)(p + offset)) || ((uint16_t)(p + offset) > f->max_pointer_idx)) { - p = (p + offset) + f->non_used_index_space; + p = (uint16_t) ((p + offset) + f->non_used_index_space); } else { @@ -342,7 +342,7 @@ static uint16_t backward_pointer(tu_fifo_t* f, uint16_t p, uint16_t offset) // We are exploiting the wrap around to the correct index if ((p < (uint16_t)(p - offset)) || ((uint16_t)(p - offset) > f->max_pointer_idx)) { - p = (p - offset) - f->non_used_index_space; + p = (uint16_t) ((p - offset) - f->non_used_index_space); } else { @@ -818,7 +818,7 @@ bool tu_fifo_clear(tu_fifo_t *f) _ff_lock(f->mutex_rd); f->rd_idx = f->wr_idx = 0; - f->max_pointer_idx = 2*f->depth-1; + f->max_pointer_idx = (uint16_t) (2*f->depth-1); f->non_used_index_space = UINT16_MAX - f->max_pointer_idx; _ff_unlock(f->mutex_wr); diff --git a/src/device/usbd.c b/src/device/usbd.c index 1806281ff..fa894accc 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -409,6 +409,7 @@ bool tud_init (uint8_t rhport) for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { usbd_class_driver_t const * driver = get_driver(i); + TU_ASSERT(driver); TU_LOG2("%s init\r\n", driver->name); driver->init(); } @@ -426,7 +427,9 @@ static void configuration_reset(uint8_t rhport) { for ( uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++ ) { - get_driver(i)->reset(rhport); + usbd_class_driver_t const * driver = get_driver(i); + TU_ASSERT(driver, ); + driver->reset(rhport); } tu_varclr(&_usbd_dev); @@ -735,7 +738,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Device status bit mask // - Bit 0: Self Powered // - Bit 1: Remote Wakeup enabled - uint16_t status = (_usbd_dev.self_powered ? 1 : 0) | (_usbd_dev.remote_wakeup_en ? 2 : 0); + uint16_t status = (uint16_t) ((_usbd_dev.self_powered ? 1u : 0u) | (_usbd_dev.remote_wakeup_en ? 2u : 0u)); tud_control_xfer(rhport, p_request, &status, 2); } break; @@ -867,8 +870,8 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) TU_ASSERT(desc_cfg != NULL && desc_cfg->bDescriptorType == TUSB_DESC_CONFIGURATION); // Parse configuration descriptor - _usbd_dev.remote_wakeup_support = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP) ? 1 : 0; - _usbd_dev.self_powered = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_SELF_POWERED ) ? 1 : 0; + _usbd_dev.remote_wakeup_support = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP) ? 1u : 0u; + _usbd_dev.self_powered = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_SELF_POWERED ) ? 1u : 0u; // Parse interface descriptor uint8_t const * p_desc = ((uint8_t const*) desc_cfg) + sizeof(tusb_desc_configuration_t); @@ -895,11 +898,12 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) tusb_desc_interface_t const * desc_itf = (tusb_desc_interface_t const*) p_desc; // Find driver for this interface - uint16_t const remaining_len = desc_end-p_desc; + uint16_t const remaining_len = (uint16_t) (desc_end-p_desc); uint8_t drv_id; for (drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { usbd_class_driver_t const *driver = get_driver(drv_id); + TU_ASSERT(driver); uint16_t const drv_len = driver->open(rhport, desc_itf, remaining_len); if ( (sizeof(tusb_desc_interface_t) <= drv_len) && (drv_len <= remaining_len) ) @@ -1101,7 +1105,7 @@ TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const * event, bool in_isr) for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) { usbd_class_driver_t const * driver = get_driver(i); - if (driver->sof) + if (driver && driver->sof) { driver->sof(event->rhport, event->sof.frame_count); } diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index 4f4108090..94a952df7 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -189,7 +189,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result TU_LOG_MEM(2, _usbd_ctrl_buf, xferred_bytes, 2); } - _ctrl_xfer.total_xferred += xferred_bytes; + _ctrl_xfer.total_xferred += (uint16_t) xferred_bytes; _ctrl_xfer.buffer += xferred_bytes; // Data Stage is complete when all request's length are transferred or diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index b500ddc46..1d849541e 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -103,7 +103,8 @@ static const dwc2_controller_t _dwc2_controller[] = // //--------------------------------------------------------------------+ -extern uint32_t SystemCoreClock; +// SystemCoreClock is alrady included by family header +// extern uint32_t SystemCoreClock; TU_ATTR_ALWAYS_INLINE static inline void dwc2_dcd_int_enable(uint8_t rhport) -- cgit v1.3.1 From 835ab01cab9ebe20eac46da1853eb158e1248f01 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Jun 2022 21:52:51 +0700 Subject: fix stm32 g4 and wb build issue with freertos, also add them to ci build --- .github/workflows/build_arm.yml | 2 ++ hw/bsp/board_mcu.h | 8 +++++++- hw/bsp/stm32g4/family.c | 4 +++- hw/bsp/stm32wb/family.c | 3 ++- 4 files changed, 14 insertions(+), 3 deletions(-) (limited to 'hw') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 5a796a49b..6e4702735 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -57,8 +57,10 @@ jobs: - 'stm32f1' - 'stm32f4' - 'stm32f7' + - 'stm32g4' - 'stm32h7' - 'stm32l4' + - 'stm32wb' - 'tm4c123' - 'xmc4000' steps: diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index b911e1e53..8202479cb 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -31,7 +31,7 @@ #include "tusb_option.h" //--------------------------------------------------------------------+ -// Low Level MCU header include. TinyUSB stack and example should be +// Low Level MCU header include. Example should be // platform independent and mostly doesn't need to include this file. // However there are still certain situation where this file is needed: // - FreeRTOSConfig.h to set up correct clock and NVIC interrupts for ARM Cortex @@ -80,6 +80,9 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32F7 #include "stm32f7xx.h" +#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 + #include "stm32g4xx.h" + #elif CFG_TUSB_MCU == OPT_MCU_STM32H7 #include "stm32h7xx.h" @@ -92,6 +95,9 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32L4 #include "stm32l4xx.h" +#elif CFG_TUSB_MCU == OPT_MCU_STM32WB + #include "stm32wbxx.h" + #elif CFG_TUSB_MCU == OPT_MCU_CXD56 // no header needed diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index 461dc61a1..a2312b0d8 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -73,7 +73,9 @@ void board_init(void) SysTick->CTRL &= ~1U; // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB_HP_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_LP_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif GPIO_InitTypeDef GPIO_InitStruct; diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index 1ed38308b..9f1f46f4d 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -67,7 +67,8 @@ void board_init(void) SysTick->CTRL &= ~1U; // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(USB_HP_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USB_LP_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif GPIO_InitTypeDef GPIO_InitStruct; -- cgit v1.3.1 From 1d6918ce419b7df13def76759ba804c46ea8024c Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Jun 2022 21:53:46 +0700 Subject: suppress redundant-decls warnings for freertos examples --- examples/device/cdc_msc_freertos/Makefile | 2 +- examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h | 1 + examples/device/hid_composite_freertos/Makefile | 2 +- hw/bsp/samd11/family.mk | 2 +- 4 files changed, 4 insertions(+), 3 deletions(-) (limited to 'hw') diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index a155d6cb7..3352dd37d 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -30,7 +30,7 @@ SRC_C += \ $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) # Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index ccb620720..6a3630dbc 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -53,6 +53,7 @@ #if CFG_TUSB_MCU == OPT_MCU_MM32F327X extern u32 SystemCoreClock; #else + // FIXME cause redundant-decls warnings extern uint32_t SystemCoreClock; #endif diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index c9b7abdf5..6c8c43ddd 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -29,7 +29,7 @@ SRC_C += \ $(subst ../../../,,$(wildcard ../../../$(FREERTOS_SRC)/portable/GCC/$(FREERTOS_PORT)/*.c)) # Suppress FreeRTOS warnings -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls # FreeRTOS (lto + Os) linker issue LDFLAGS += -Wl,--undefined=vTaskSwitchContext diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index ae55be75b..85cc136a6 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -12,7 +12,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMD11 # suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-qual +CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ -- cgit v1.3.1 From 0042eccb3b2ff0f980f3a927a271364a2089ada5 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Jun 2022 22:22:52 +0700 Subject: fix redundant-decls warnings by usbd/usbh --- examples/make.mk | 6 +++--- hw/bsp/nrf/family.mk | 3 --- src/class/msc/msc_device.c | 2 +- src/device/dcd.h | 7 ------- src/device/usbd.c | 2 +- src/device/usbd.h | 5 ++++- src/device/usbd_control.c | 2 +- src/host/hub.c | 1 + src/host/usbh.c | 3 +-- src/host/usbh.h | 6 ++++-- 10 files changed, 16 insertions(+), 21 deletions(-) (limited to 'hw') diff --git a/examples/make.mk b/examples/make.mk index 26065c027..fa909ddca 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -90,13 +90,13 @@ CFLAGS += \ -ffunction-sections \ -fsingle-precision-constant \ -fno-strict-aliasing \ - -Wdouble-promotion \ - -Wstrict-prototypes \ - -Wstrict-overflow \ -Wall \ -Wextra \ -Werror \ -Wfatal-errors \ + -Wdouble-promotion \ + -Wstrict-prototypes \ + -Wstrict-overflow \ -Werror-implicit-function-declaration \ -Wfloat-equal \ -Wundef \ diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index 609e2da0b..d8283a9e6 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -16,9 +16,6 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=undef -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual -# warning caused by dcd_nrf5x.c due to include of usbd.h and re-declare of dcd_int_handler() -CFLAGS += -Wno-error=redundant-decls - # All source paths should be relative to the top level. LD_FILE ?= hw/bsp/nrf/boards/$(BOARD)/nrf52840_s140_v6.ld diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 33dd4ac37..00b0a1d06 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -28,9 +28,9 @@ #if (CFG_TUD_ENABLED && CFG_TUD_MSC) +#include "device/dcd.h" // for faking dcd_event_xfer_complete #include "device/usbd.h" #include "device/usbd_pvt.h" -#include "device/dcd.h" // for faking dcd_event_xfer_complete #include "msc_device.h" diff --git a/src/device/dcd.h b/src/device/dcd.h index 6b99734fe..c1780f656 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -110,14 +110,7 @@ typedef struct TU_ATTR_ALIGNED(4) void dcd_init (uint8_t rhport); // Interrupt Handler -#if __GNUC__ && !defined(__ARMCC_VERSION) -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wredundant-decls" -#endif void dcd_int_handler(uint8_t rhport); -#if __GNUC__ && !defined(__ARMCC_VERSION) -#pragma GCC diagnostic pop -#endif // Enable device interrupt void dcd_int_enable (uint8_t rhport); diff --git a/src/device/usbd.c b/src/device/usbd.c index fa894accc..b2053174e 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -28,12 +28,12 @@ #if CFG_TUD_ENABLED +#include "device/dcd.h" #include "tusb.h" #include "common/tusb_private.h" #include "device/usbd.h" #include "device/usbd_pvt.h" -#include "device/dcd.h" //--------------------------------------------------------------------+ // USBD Configuration diff --git a/src/device/usbd.h b/src/device/usbd.h index 964cfb992..17b4d927b 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -58,8 +58,11 @@ void tud_task (void) // Check if there is pending events need processing by tud_task() bool tud_task_event_ready(void); -// Interrupt handler, name alias to DCD +#ifndef _TUSB_DCD_H_ extern void dcd_int_handler(uint8_t rhport); +#endif + +// Interrupt handler, name alias to DCD #define tud_int_handler dcd_int_handler // Get current bus speed diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index 94a952df7..0995ef669 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -28,9 +28,9 @@ #if CFG_TUD_ENABLED +#include "dcd.h" #include "tusb.h" #include "device/usbd_pvt.h" -#include "dcd.h" #if CFG_TUSB_DEBUG >= 2 extern void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); diff --git a/src/host/hub.c b/src/host/hub.c index 5c0fd9166..3400b154a 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -28,6 +28,7 @@ #if (CFG_TUH_ENABLED && CFG_TUH_HUB) +#include "hcd.h" #include "usbh.h" #include "usbh_classdriver.h" #include "hub.h" diff --git a/src/host/usbh.c b/src/host/usbh.c index 4807d20b8..4c9b0b1ba 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -28,10 +28,9 @@ #if CFG_TUH_ENABLED +#include "host/hcd.h" #include "tusb.h" #include "common/tusb_private.h" - -#include "host/usbh.h" #include "host/usbh_classdriver.h" #include "hub.h" diff --git a/src/host/usbh.h b/src/host/usbh.h index 347c75b8c..560a1ea23 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -32,7 +32,6 @@ #endif #include "common/tusb_common.h" -#include "hcd.h" //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF @@ -115,8 +114,11 @@ void tuh_task(void) tuh_task_ext(UINT32_MAX, false); } -// Interrupt handler, name alias to HCD +#ifndef _TUSB_HCD_H_ extern void hcd_int_handler(uint8_t rhport); +#endif + +// Interrupt handler, name alias to HCD #define tuh_int_handler hcd_int_handler bool tuh_vid_pid_get(uint8_t daddr, uint16_t* vid, uint16_t* pid); -- cgit v1.3.1 From b9dc9dbd78ee1890342429502d585f323c480fc2 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 27 Jun 2022 11:50:17 +0700 Subject: fix most warnings with rp2040 -wconversion --- examples/device/audio_4_channel_mic/CMakeLists.txt | 3 +++ examples/device/audio_4_channel_mic/src/main.c | 2 +- .../audio_4_channel_mic/src/usb_descriptors.c | 4 ++-- examples/device/audio_test/CMakeLists.txt | 3 +++ examples/device/audio_test/src/main.c | 2 +- examples/device/audio_test/src/usb_descriptors.c | 4 ++-- examples/device/board_test/CMakeLists.txt | 3 +++ examples/device/cdc_dual_ports/CMakeLists.txt | 3 +++ .../device/cdc_dual_ports/src/usb_descriptors.c | 4 ++-- examples/device/cdc_msc/CMakeLists.txt | 3 +++ .../device/cdc_msc_freertos/src/usb_descriptors.c | 4 ++-- examples/device/dfu/CMakeLists.txt | 5 ++++- examples/device/dfu/src/usb_descriptors.c | 2 +- examples/device/dfu_runtime/CMakeLists.txt | 3 +++ examples/device/dfu_runtime/src/usb_descriptors.c | 4 ++-- .../device/dynamic_configuration/CMakeLists.txt | 3 +++ examples/device/dynamic_configuration/src/main.c | 2 +- .../device/dynamic_configuration/src/msc_disk.c | 6 +++--- .../dynamic_configuration/src/usb_descriptors.c | 4 ++-- examples/device/hid_boot_interface/CMakeLists.txt | 3 +++ .../hid_boot_interface/src/usb_descriptors.c | 4 ++-- examples/device/hid_composite/CMakeLists.txt | 3 +++ .../device/hid_composite/src/usb_descriptors.c | 4 ++-- .../hid_composite_freertos/src/usb_descriptors.c | 4 ++-- examples/device/hid_generic_inout/CMakeLists.txt | 3 +++ .../device/hid_generic_inout/src/usb_descriptors.c | 4 ++-- .../device/hid_multiple_interface/CMakeLists.txt | 3 +++ .../hid_multiple_interface/src/usb_descriptors.c | 4 ++-- examples/device/midi_test/CMakeLists.txt | 3 +++ examples/device/midi_test/src/usb_descriptors.c | 4 ++-- examples/device/msc_dual_lun/CMakeLists.txt | 3 +++ examples/device/msc_dual_lun/src/usb_descriptors.c | 4 ++-- examples/device/net_lwip_webserver/CMakeLists.txt | 3 +++ .../net_lwip_webserver/src/usb_descriptors.c | 4 ++-- examples/device/uac2_headset/CMakeLists.txt | 3 +++ examples/device/uac2_headset/src/usb_descriptors.c | 2 +- examples/device/usbtmc/CMakeLists.txt | 3 +++ examples/device/usbtmc/src/usb_descriptors.c | 2 +- examples/device/video_capture/CMakeLists.txt | 3 +++ .../device/video_capture/src/usb_descriptors.c | 4 ++-- examples/device/webusb_serial/CMakeLists.txt | 3 +++ .../device/webusb_serial/src/usb_descriptors.c | 4 ++-- .../host_hid_to_device_cdc/src/usb_descriptors.c | 2 +- examples/example.cmake | 25 ++++++++++++++++++++++ hw/bsp/rp2040/family.c | 6 +++++- src/class/audio/audio_device.c | 2 +- src/class/hid/hid_device.c | 5 +++-- src/class/midi/midi_device.c | 12 +++++------ 48 files changed, 140 insertions(+), 53 deletions(-) create mode 100644 examples/example.cmake (limited to 'hw') diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index f6e10e2ea..e6ce2813e 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 9c94edd49..a6af5fd19 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -221,7 +221,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * // Request uses format layout 2 TU_VERIFY(p_request->wLength == sizeof(audio_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/audio_4_channel_mic/src/usb_descriptors.c b/examples/device/audio_4_channel_mic/src/usb_descriptors.c index 93ae2ea47..8929f3057 100644 --- a/examples/device/audio_4_channel_mic/src/usb_descriptors.c +++ b/examples/device/audio_4_channel_mic/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; for(uint8_t i=0; iwLength == sizeof(audio_control_cur_2_t)); - volume[channelNum] = ((audio_control_cur_2_t*) pBuff)->bCur; + volume[channelNum] = (uint16_t) ((audio_control_cur_2_t*) pBuff)->bCur; TU_LOG2(" Set Volume: %d dB of channel: %u\r\n", volume[channelNum], channelNum); return true; diff --git a/examples/device/audio_test/src/usb_descriptors.c b/examples/device/audio_test/src/usb_descriptors.c index 09b2a2d45..da3e203d7 100644 --- a/examples/device/audio_test/src/usb_descriptors.c +++ b/examples/device/audio_test/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; for(uint8_t i=0; i 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index fa6e83b7e..04c7c1b26 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/cdc_msc_freertos/src/usb_descriptors.c b/examples/device/cdc_msc_freertos/src/usb_descriptors.c index 9585822a3..30a712275 100644 --- a/examples/device/cdc_msc_freertos/src/usb_descriptors.c +++ b/examples/device/cdc_msc_freertos/src/usb_descriptors.c @@ -247,7 +247,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -258,7 +258,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index abc4d91da..121ab3852 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT}) \ No newline at end of file +family_configure_device_example(${PROJECT}) diff --git a/examples/device/dfu/src/usb_descriptors.c b/examples/device/dfu/src/usb_descriptors.c index 350334aa5..51a0d09f5 100644 --- a/examples/device/dfu/src/usb_descriptors.c +++ b/examples/device/dfu/src/usb_descriptors.c @@ -152,7 +152,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dfu_runtime/src/usb_descriptors.c b/examples/device/dfu_runtime/src/usb_descriptors.c index 060943289..1b0a60551 100644 --- a/examples/device/dfu_runtime/src/usb_descriptors.c +++ b/examples/device/dfu_runtime/src/usb_descriptors.c @@ -147,7 +147,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } @@ -160,7 +160,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (uint16_t)((((uint16_t)TUSB_DESC_STRING) << 8 ) | (2u*chr_count + 2u)); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index fa6e83b7e..04c7c1b26 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 95f8b8286..33a603343 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -181,7 +181,7 @@ void midi_task(void) start_ms += 286; // Previous positions in the note sequence. - int previous = note_pos - 1; + int previous = (int) (note_pos - 1); // If we currently are at position 0, set the // previous position to the last note in the sequence. diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index a895f4738..e8cb03fdd 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -184,7 +184,7 @@ int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buff uint8_t const* addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); - return bufsize; + return (int32_t) bufsize; } // Callback invoked when received WRITE10 command. @@ -203,7 +203,7 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* (void) lba; (void) offset; (void) buffer; #endif - return bufsize; + return (int32_t) bufsize; } // Callback invoked when received an SCSI command not in built-in list below @@ -237,7 +237,7 @@ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, { if(in_xfer) { - memcpy(buffer, response, resplen); + memcpy(buffer, response, (size_t) resplen); }else { // SCSI output diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index b88f20163..457f774d0 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -226,7 +226,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -237,7 +237,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_boot_interface/src/usb_descriptors.c b/examples/device/hid_boot_interface/src/usb_descriptors.c index 3fa48d98d..a0d7e9f15 100644 --- a/examples/device/hid_boot_interface/src/usb_descriptors.c +++ b/examples/device/hid_boot_interface/src/usb_descriptors.c @@ -163,7 +163,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -174,7 +174,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index e760b20ba..2988baee2 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -210,7 +210,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -221,7 +221,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_composite_freertos/src/usb_descriptors.c b/examples/device/hid_composite_freertos/src/usb_descriptors.c index 791813fdf..4df12d3db 100644 --- a/examples/device/hid_composite_freertos/src/usb_descriptors.c +++ b/examples/device/hid_composite_freertos/src/usb_descriptors.c @@ -208,7 +208,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -219,7 +219,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_generic_inout/src/usb_descriptors.c b/examples/device/hid_generic_inout/src/usb_descriptors.c index 5dabf42a3..c2b4792c8 100644 --- a/examples/device/hid_generic_inout/src/usb_descriptors.c +++ b/examples/device/hid_generic_inout/src/usb_descriptors.c @@ -153,7 +153,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -164,7 +164,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_multiple_interface/src/usb_descriptors.c b/examples/device/hid_multiple_interface/src/usb_descriptors.c index 9eef21504..42471a961 100644 --- a/examples/device/hid_multiple_interface/src/usb_descriptors.c +++ b/examples/device/hid_multiple_interface/src/usb_descriptors.c @@ -171,7 +171,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -182,7 +182,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/midi_test/src/usb_descriptors.c b/examples/device/midi_test/src/usb_descriptors.c index 8444237c6..c84a873b1 100644 --- a/examples/device/midi_test/src/usb_descriptors.c +++ b/examples/device/midi_test/src/usb_descriptors.c @@ -166,7 +166,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -177,7 +177,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 9e834ae21..518eac3ad 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/msc_dual_lun/src/usb_descriptors.c b/examples/device/msc_dual_lun/src/usb_descriptors.c index 2afd391af..68a671c91 100644 --- a/examples/device/msc_dual_lun/src/usb_descriptors.c +++ b/examples/device/msc_dual_lun/src/usb_descriptors.c @@ -168,7 +168,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -179,7 +179,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 8e3f0f5a8..5bb091a4f 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -69,6 +69,9 @@ if (EXISTS ${TOP}/lib/lwip/src) ${TOP}/lib/networking/rndis_reports.c ) + # Example common such as compiler warnings + include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) diff --git a/examples/device/net_lwip_webserver/src/usb_descriptors.c b/examples/device/net_lwip_webserver/src/usb_descriptors.c index 2b4b2a0c3..bee51790a 100644 --- a/examples/device/net_lwip_webserver/src/usb_descriptors.c +++ b/examples/device/net_lwip_webserver/src/usb_descriptors.c @@ -231,7 +231,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > (TU_ARRAY_SIZE(_desc_str) - 1)) chr_count = TU_ARRAY_SIZE(_desc_str) - 1; // Convert ASCII string into UTF-16 @@ -242,7 +242,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/uac2_headset/src/usb_descriptors.c b/examples/device/uac2_headset/src/usb_descriptors.c index 9e97845b8..a2d6368bf 100644 --- a/examples/device/uac2_headset/src/usb_descriptors.c +++ b/examples/device/uac2_headset/src/usb_descriptors.c @@ -155,7 +155,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if (chr_count > 31) chr_count = 31; for (uint8_t i = 0; i < chr_count; i++) diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index c49603c26..74f81b24f 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -24,6 +24,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/usbtmc/src/usb_descriptors.c b/examples/device/usbtmc/src/usb_descriptors.c index 423482634..770a97436 100644 --- a/examples/device/usbtmc/src/usb_descriptors.c +++ b/examples/device/usbtmc/src/usb_descriptors.c @@ -175,7 +175,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) { chr_count = 31; } diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index cb321f9a8..416b91665 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/video_capture/src/usb_descriptors.c b/examples/device/video_capture/src/usb_descriptors.c index da8ec8e89..5c97f4fe1 100644 --- a/examples/device/video_capture/src/usb_descriptors.c +++ b/examples/device/video_capture/src/usb_descriptors.c @@ -149,7 +149,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -160,7 +160,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index abc4d91da..438635958 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -23,6 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) +# Example common such as compiler warnings +include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) + # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/webusb_serial/src/usb_descriptors.c b/examples/device/webusb_serial/src/usb_descriptors.c index 93e802a90..cafe2c22b 100644 --- a/examples/device/webusb_serial/src/usb_descriptors.c +++ b/examples/device/webusb_serial/src/usb_descriptors.c @@ -235,7 +235,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) const char* str = string_desc_arr[index]; // Cap at max char - chr_count = strlen(str); + chr_count = (uint8_t) strlen(str); if ( chr_count > 31 ) chr_count = 31; // Convert ASCII string into UTF-16 @@ -246,7 +246,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c index e55899f65..6b0a89127 100644 --- a/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c +++ b/examples/dual/host_hid_to_device_cdc/src/usb_descriptors.c @@ -259,7 +259,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) } // first byte is length (including header), second byte is string type - _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2); + _desc_str[0] = (uint16_t) ((TUSB_DESC_STRING << 8 ) | (2*chr_count + 2)); return _desc_str; } diff --git a/examples/example.cmake b/examples/example.cmake new file mode 100644 index 000000000..6bb82a56d --- /dev/null +++ b/examples/example.cmake @@ -0,0 +1,25 @@ +target_compile_options(${PROJECT} PUBLIC + -Wall + -Wextra + -Werror + -Wfatal-errors + -Wdouble-promotion + #-Wstrict-prototypes + -Wstrict-overflow + #-Werror-implicit-function-declaration + -Wfloat-equal + #-Wundef + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-function-type + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wredundant-decls + -Wconversion + ) diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c index 68c9e2d52..90e2192c0 100644 --- a/hw/bsp/rp2040/family.c +++ b/hw/bsp/rp2040/family.c @@ -53,7 +53,7 @@ // // This doesn't work if others are trying to access flash at the same time, // e.g. XIP streamer, or the other core. -bool __no_inline_not_in_flash_func(get_bootsel_button)() { +bool __no_inline_not_in_flash_func(get_bootsel_button)(void) { const uint CS_PIN_INDEX = 1; // Must disable interrupts, as interrupt handlers may be in flash, and we @@ -170,6 +170,8 @@ void board_init(void) void board_led_write(bool state) { + (void) state; + #ifdef LED_PIN gpio_put(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); #endif @@ -192,6 +194,7 @@ int board_uart_read(uint8_t* buf, int len) } return len; #else + (void) buf; (void) len; return 0; #endif } @@ -205,6 +208,7 @@ int board_uart_write(void const * buf, int len) } return len; #else + (void) buf; (void) len; return 0; #endif } diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index dbd8ab54b..e13e4a46c 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1619,7 +1619,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - const uint16_t active_fifo_depth = (audio->tx_supp_ff_sz_max / audio->n_bytes_per_sampe_tx) * audio->n_bytes_per_sampe_tx; + const uint16_t active_fifo_depth = (uint16_t) ((audio->tx_supp_ff_sz_max / audio->n_bytes_per_sampe_tx) * audio->n_bytes_per_sampe_tx); for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { tu_fifo_config(&audio->tx_supp_ff[cnt], audio->tx_supp_ff[cnt].buffer, active_fifo_depth, 1, true); diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index cdf155e1c..d15d44838 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -187,7 +187,8 @@ uint16_t hidd_open(uint8_t rhport, tusb_desc_interface_t const * desc_itf, uint1 TU_VERIFY(TUSB_CLASS_HID == desc_itf->bInterfaceClass, 0); // len = interface + hid + n*endpoints - uint16_t const drv_len = sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints*sizeof(tusb_desc_endpoint_t); + uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); TU_ASSERT(max_len >= drv_len, 0); // Find available interface @@ -408,7 +409,7 @@ bool hidd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ // Received report else if (ep_addr == p_hid->ep_out) { - tud_hid_set_report_cb(instance, 0, HID_REPORT_TYPE_INVALID, p_hid->epout_buf, xferred_bytes); + tud_hid_set_report_cb(instance, 0, HID_REPORT_TYPE_INVALID, p_hid->epout_buf, (uint16_t) xferred_bytes); TU_ASSERT(usbd_edpt_xfer(rhport, p_hid->ep_out, p_hid->epout_buf, sizeof(p_hid->epout_buf))); } diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index 28e6a92d2..de41706e8 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -127,7 +127,7 @@ uint32_t tud_midi_n_available(uint8_t itf, uint8_t cable_num) midid_stream_t const* stream = &midi->stream_read; // when using with packet API stream total & index are both zero - return tu_fifo_count(&midi->rx_ff) + (stream->total - stream->index); + return tu_fifo_count(&midi->rx_ff) + (uint8_t) (stream->total - stream->index); } uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void* buffer, uint32_t bufsize) @@ -179,7 +179,7 @@ uint32_t tud_midi_n_stream_read(uint8_t itf, uint8_t cable_num, void* buffer, ui } // Copy data up to bufsize - uint32_t const count = tu_min32(stream->total - stream->index, bufsize); + uint8_t const count = (uint8_t) tu_min32(stream->total - stream->index, bufsize); // Skip the header (1st byte) in the buffer memcpy(buf8, stream->buffer + 1 + stream->index, count); @@ -276,13 +276,13 @@ uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, uint8_t const* else if ( (msg >= 0x8 && msg <= 0xB) || msg == 0xE ) { // Channel Voice Messages - stream->buffer[0] = (cable_num << 4) | msg; + stream->buffer[0] = (uint8_t) ((cable_num << 4) | msg); stream->total = 4; } else if ( msg == 0xC || msg == 0xD) { // Channel Voice Messages, two-byte variants (Program Change and Channel Pressure) - stream->buffer[0] = (cable_num << 4) | msg; + stream->buffer[0] = (uint8_t) ((cable_num << 4) | msg); stream->total = 3; } else if ( msg == 0xf ) @@ -312,7 +312,7 @@ uint32_t tud_midi_n_stream_write(uint8_t itf, uint8_t cable_num, uint8_t const* else { // Pack individual bytes if we don't support packing them into words. - stream->buffer[0] = cable_num << 4 | 0xf; + stream->buffer[0] = (uint8_t) (cable_num << 4 | 0xf); stream->buffer[2] = 0; stream->buffer[3] = 0; stream->index = 2; @@ -513,7 +513,7 @@ bool midid_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32 // receive new data if ( ep_addr == p_midi->ep_out ) { - tu_fifo_write_n(&p_midi->rx_ff, p_midi->epout_buf, xferred_bytes); + tu_fifo_write_n(&p_midi->rx_ff, p_midi->epout_buf, (uint16_t) xferred_bytes); // invoke receive callback if available if (tud_midi_rx_cb) tud_midi_rx_cb(itf); -- cgit v1.3.1 From 4057c2d8d96a364329d14d3a4b2c237f388cfdc2 Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Mon, 27 Jun 2022 22:39:10 +0100 Subject: rework suppress_tinyusb_warnings * gcc 9.2.1 has some spurious -Wconversion warnings * cmake 3.18 and above require set_target_properties to be added from the target directory (so added it to all examples) * fixed a few warnings in a couple of examples --- examples/device/cdc_dual_ports/src/main.c | 4 +-- examples/device/hid_composite/src/main.c | 2 +- hw/bsp/rp2040/family.cmake | 46 +++++++++++++++++++------------ 3 files changed, 32 insertions(+), 20 deletions(-) (limited to 'hw') diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 6053a3b81..d4d07dcd6 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -60,12 +60,12 @@ static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count) if (itf == 0) { // echo back 1st port as lower case - if (isupper(buf[i])) buf[i] += 'a' - 'A'; + if (isupper(buf[i])) buf[i] = (uint8_t) (buf[i] + 'a' - 'A'); } else { // echo back 2nd port as upper case - if (islower(buf[i])) buf[i] -= 'a' - 'A'; + if (islower(buf[i])) buf[i] = (uint8_t) (buf[i] - 'a' - 'A'); } tud_cdc_n_write_char(itf, buf[i]); diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index bc2347ab8..cc3566ac1 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -230,7 +230,7 @@ void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint8_t (void) instance; (void) len; - uint8_t next_report_id = report[0] + 1; + uint8_t next_report_id = (uint8_t)(report[0] + 1); if (next_report_id < REPORT_ID_COUNT) { diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index ed7041e4e..794d02325 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -150,11 +150,13 @@ if (NOT TARGET _rp2040_family_inclusion_marker) function(family_configure_device_example TARGET) family_configure_target(${TARGET}) target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device) + suppress_tinyusb_warnings() endfunction() function(family_configure_host_example TARGET) family_configure_target(${TARGET}) target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) + suppress_tinyusb_warnings() endfunction() function(family_add_pico_pio_usb TARGET) @@ -165,6 +167,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) family_configure_target(${TARGET}) # require tinyusb_pico_pio_usb target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_host tinyusb_pico_pio_usb ) + suppress_tinyusb_warnings() endfunction() function(check_and_add_pico_pio_usb_support) @@ -232,25 +235,34 @@ if (NOT TARGET _rp2040_family_inclusion_marker) # This method must be called from the project scope to suppress known warnings in TinyUSB source files function(suppress_tinyusb_warnings) - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/device/usbd.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/device/usbd_control.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c + # some of these are pretty silly warnings only occurring in some older GCC versions + set(CONVERSION_WARNING_FILES + ${PICO_TINYUSB_PATH}/src/tusb.c + ${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c + ${PICO_TINYUSB_PATH}/src/device/usbd.c + ${PICO_TINYUSB_PATH}/src/device/usbd_control.c + ${PICO_TINYUSB_PATH}/src/host/usbh.c + ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c + ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_host.c + ${PICO_TINYUSB_PATH}/src/class/hid/hid_device.c + ${PICO_TINYUSB_PATH}/src/class/hid/hid_host.c + ${PICO_TINYUSB_PATH}/src/class/audio/audio_device.c + ${PICO_TINYUSB_PATH}/src/class/dfu/dfu_device.c + ${PICO_TINYUSB_PATH}/src/class/dfu/dfu_rt_device.c + ${PICO_TINYUSB_PATH}/src/class/midi/midi_device.c + ${PICO_TINYUSB_PATH}/src/class/usbtmc/usbtmc_device.c + ${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/hcd_rp2040.c + ) + foreach(SOURCE_FILE IN LISTS CONVERSION_WARNING_FILES) + set_source_files_properties( + ${SOURCE_FILE} PROPERTIES COMPILE_FLAGS "-Wno-conversion") + endforeach() set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") - set_source_files_properties( - ${PICO_TINYUSB_PATH}/src/tusb.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") + ${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/rp2040_usb.c + PROPERTIES + COMPILE_FLAGS "-Wno-stringop-overflow -Wno-array-bounds" + ) endfunction() endif() -- cgit v1.3.1 From 898b52be45f476d7062d50fed722d92f0dccf4ae Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 28 Jun 2022 16:27:44 +0700 Subject: update rp2040 warnings - remove "-Wno-stringop-overflow -Wno-array-bounds" - skip -Wconversion for gcc 9 and prior - suppress_tinyusb_warnings only when building with gcc 9 and below --- examples/device/cdc_dual_ports/src/main.c | 6 ++-- examples/device/hid_composite/src/main.c | 2 +- examples/example.cmake | 6 ++++ hw/bsp/rp2040/family.cmake | 55 +++++++++++++++---------------- 4 files changed, 37 insertions(+), 32 deletions(-) (limited to 'hw') diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index d4d07dcd6..0264f0566 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -55,17 +55,19 @@ int main(void) // with Serial0 as all lower case, Serial1 as all upper case static void echo_serial_port(uint8_t itf, uint8_t buf[], uint32_t count) { + uint8_t const case_diff = 'a' - 'A'; + for(uint32_t i=0; i Date: Wed, 29 Jun 2022 14:06:44 +0700 Subject: fix buid_board.py script --- hw/bsp/ea4088qs/ea4088qs.c | 4 +-- hw/bsp/frdm_k32l2b/board.mk | 2 +- hw/bsp/frdm_kl25z/board.mk | 2 +- hw/bsp/kuiic/kuiic.c | 2 +- hw/bsp/lpcxpresso11u37/board.mk | 2 +- hw/bsp/lpcxpresso1347/board.mk | 2 +- hw/bsp/nutiny_nuc121s/board.mk | 3 +++ hw/bsp/nutiny_nuc125s/board.mk | 3 +++ hw/bsp/nutiny_nuc126v/board.mk | 3 +++ hw/bsp/nutiny_sdk_nuc505/board.mk | 3 +++ hw/bsp/same70_qmtech/board.mk | 2 +- hw/bsp/same70_xplained/board.mk | 2 +- hw/bsp/samg55xplained/board.mk | 2 +- hw/bsp/spresense/board.mk | 3 ++- hw/bsp/stm32l0538disco/board.mk | 2 +- src/portable/synopsys/dwc2/dwc2_stm32.h | 3 +++ tools/build_family.py | 2 +- tools/build_utils.py | 44 +++++++++++++++++++-------------- 18 files changed, 55 insertions(+), 31 deletions(-) (limited to 'hw') diff --git a/hw/bsp/ea4088qs/ea4088qs.c b/hw/bsp/ea4088qs/ea4088qs.c index fa905b2f9..7150ed393 100644 --- a/hw/bsp/ea4088qs/ea4088qs.c +++ b/hw/bsp/ea4088qs/ea4088qs.c @@ -33,11 +33,11 @@ void USB_IRQHandler(void) { #if CFG_TUD_ENABLED - tuh_int_handler(0); + tud_int_handler(0); #endif #if CFG_TUH_ENABLED - tud_int_handler(0); + tuh_int_handler(0); #endif } diff --git a/hw/bsp/frdm_k32l2b/board.mk b/hw/bsp/frdm_k32l2b/board.mk index 56df553da..a737eb360 100644 --- a/hw/bsp/frdm_k32l2b/board.mk +++ b/hw/bsp/frdm_k32l2b/board.mk @@ -9,7 +9,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_K32L2BXX # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls MCU_DIR = $(SDK_DIR)/devices/K32L2B31A diff --git a/hw/bsp/frdm_kl25z/board.mk b/hw/bsp/frdm_kl25z/board.mk index 3585b8b03..6a72d516b 100644 --- a/hw/bsp/frdm_kl25z/board.mk +++ b/hw/bsp/frdm_kl25z/board.mk @@ -14,7 +14,7 @@ LDFLAGS += \ -Wl,--defsym,__heap_size__=0 # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=format +CFLAGS += -Wno-error=unused-parameter -Wno-error=format -Wno-error=redundant-decls MCU_DIR = $(SDK_DIR)/devices/MKL25Z4 diff --git a/hw/bsp/kuiic/kuiic.c b/hw/bsp/kuiic/kuiic.c index 737ef3f5c..7aaa9e03c 100644 --- a/hw/bsp/kuiic/kuiic.c +++ b/hw/bsp/kuiic/kuiic.c @@ -45,7 +45,7 @@ * Variables ******************************************************************************/ /* System clock frequency. */ -extern uint32_t SystemCoreClock; +// extern uint32_t SystemCoreClock; /******************************************************************************* * Variables for BOARD_BootClockRUN configuration diff --git a/hw/bsp/lpcxpresso11u37/board.mk b/hw/bsp/lpcxpresso11u37/board.mk index b736eebe1..be6d2ed52 100644 --- a/hw/bsp/lpcxpresso11u37/board.mk +++ b/hw/bsp/lpcxpresso11u37/board.mk @@ -15,7 +15,7 @@ CFLAGS += \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' # mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter +CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=redundant-decls MCU_DIR = hw/mcu/nxp/lpcopen/lpc11uxx/lpc_chip_11uxx diff --git a/hw/bsp/lpcxpresso1347/board.mk b/hw/bsp/lpcxpresso1347/board.mk index 62135c274..bf9c97c82 100644 --- a/hw/bsp/lpcxpresso1347/board.mk +++ b/hw/bsp/lpcxpresso1347/board.mk @@ -15,7 +15,7 @@ CFLAGS += \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' # startup.c and lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes +CFLAGS += -Wno-error=strict-prototypes -Wno-error=redundant-decls MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx diff --git a/hw/bsp/nutiny_nuc121s/board.mk b/hw/bsp/nutiny_nuc121s/board.mk index ff1d5aa3a..ad2ee1ea0 100644 --- a/hw/bsp/nutiny_nuc121s/board.mk +++ b/hw/bsp/nutiny_nuc121s/board.mk @@ -10,6 +10,9 @@ CFLAGS += \ -DCFG_EXAMPLE_MSC_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_NUC121 +# mcu driver cause following warnings +CFLAGS += -Wno-error=redundant-decls + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc121_flash.ld diff --git a/hw/bsp/nutiny_nuc125s/board.mk b/hw/bsp/nutiny_nuc125s/board.mk index bb56e42ab..000c8cd95 100644 --- a/hw/bsp/nutiny_nuc125s/board.mk +++ b/hw/bsp/nutiny_nuc125s/board.mk @@ -10,6 +10,9 @@ CFLAGS += \ -DCFG_EXAMPLE_MSC_READONLY \ -DCFG_TUSB_MCU=OPT_MCU_NUC121 +# mcu driver cause following warnings +CFLAGS += -Wno-error=redundant-decls + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc125_flash.ld diff --git a/hw/bsp/nutiny_nuc126v/board.mk b/hw/bsp/nutiny_nuc126v/board.mk index 4f0ebf201..0dcd897cb 100644 --- a/hw/bsp/nutiny_nuc126v/board.mk +++ b/hw/bsp/nutiny_nuc126v/board.mk @@ -11,6 +11,9 @@ CFLAGS += \ -D__CORTEX_SC=0 \ -DCFG_TUSB_MCU=OPT_MCU_NUC126 +# mcu driver cause following warnings +CFLAGS += -Wno-error=redundant-decls + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc126_flash.ld diff --git a/hw/bsp/nutiny_sdk_nuc505/board.mk b/hw/bsp/nutiny_sdk_nuc505/board.mk index e8514347e..f27577e36 100644 --- a/hw/bsp/nutiny_sdk_nuc505/board.mk +++ b/hw/bsp/nutiny_sdk_nuc505/board.mk @@ -9,6 +9,9 @@ CFLAGS += \ -mfpu=fpv4-sp-d16 \ -DCFG_TUSB_MCU=OPT_MCU_NUC505 +# mcu driver cause following warnings +CFLAGS += -Wno-error=redundant-decls + # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/nuc505_flashtoram.ld diff --git a/hw/bsp/same70_qmtech/board.mk b/hw/bsp/same70_qmtech/board.mk index ba7088e44..2aa09f5dd 100644 --- a/hw/bsp/same70_qmtech/board.mk +++ b/hw/bsp/same70_qmtech/board.mk @@ -11,7 +11,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMX7X # suppress following warnings from mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual -Wno-error=redundant-decls ASF_DIR = hw/mcu/microchip/same70 diff --git a/hw/bsp/same70_xplained/board.mk b/hw/bsp/same70_xplained/board.mk index cb2decf50..cbc51e6b0 100644 --- a/hw/bsp/same70_xplained/board.mk +++ b/hw/bsp/same70_xplained/board.mk @@ -11,7 +11,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMX7X # suppress following warnings from mcu driver -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual +CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align -Wno-error=cast-qual -Wno-error=redundant-decls ASF_DIR = hw/mcu/microchip/same70 diff --git a/hw/bsp/samg55xplained/board.mk b/hw/bsp/samg55xplained/board.mk index deff6944c..d0d0ade01 100644 --- a/hw/bsp/samg55xplained/board.mk +++ b/hw/bsp/samg55xplained/board.mk @@ -12,7 +12,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_SAMG # suppress following warnings from mcu driver -CFLAGS += -Wno-error=undef -Wno-error=cast-qual -Wno-error=null-dereference +CFLAGS += -Wno-error=undef -Wno-error=cast-qual -Wno-error=null-dereference -Wno-error=redundant-decls ASF_DIR = hw/mcu/microchip/samg55 diff --git a/hw/bsp/spresense/board.mk b/hw/bsp/spresense/board.mk index ba291e817..78d7f6a66 100644 --- a/hw/bsp/spresense/board.mk +++ b/hw/bsp/spresense/board.mk @@ -34,8 +34,9 @@ CFLAGS += \ -Wno-error=unused-parameter \ -DCFG_TUSB_MCU=OPT_MCU_CXD56 \ +# suppress following warnings from mcu driver # lwip/src/core/raw.c:334:43: error: declaration of 'recv' shadows a global declaration -CFLAGS += -Wno-error=shadow +CFLAGS += -Wno-error=shadow -Wno-error=redundant-decls SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk diff --git a/hw/bsp/stm32l0538disco/board.mk b/hw/bsp/stm32l0538disco/board.mk index e19101d64..69f09075a 100644 --- a/hw/bsp/stm32l0538disco/board.mk +++ b/hw/bsp/stm32l0538disco/board.mk @@ -17,7 +17,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32L0 # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized +CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized -Wno-error=redundant-decls # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/STM32L053C8Tx_FLASH.ld diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 1d849541e..1187e0d6e 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -43,6 +43,9 @@ #define EP_MAX_FS USB_OTG_FS_MAX_IN_ENDPOINTS #define EP_FIFO_SIZE_FS USB_OTG_FS_TOTAL_FIFO_SIZE + #define EP_MAX_HS USB_OTG_HS_MAX_IN_ENDPOINTS + #define EP_FIFO_SIZE_HS USB_OTG_HS_TOTAL_FIFO_SIZE + #elif CFG_TUSB_MCU == OPT_MCU_STM32F4 #include "stm32f4xx.h" #define EP_MAX_FS USB_OTG_FS_MAX_IN_ENDPOINTS diff --git a/tools/build_family.py b/tools/build_family.py index 095ca4ff7..680411eab 100644 --- a/tools/build_family.py +++ b/tools/build_family.py @@ -48,7 +48,7 @@ all_families.sort() def build_family(example, family): all_boards = [] for entry in os.scandir("hw/bsp/{}/boards".format(family)): - if entry.is_dir(): + if entry.is_dir() and entry.name != 'pico_sdk': all_boards.append(entry.name) filter_with_input(all_boards) all_boards.sort() diff --git a/tools/build_utils.py b/tools/build_utils.py index 299fffa4d..68c2ed98b 100644 --- a/tools/build_utils.py +++ b/tools/build_utils.py @@ -4,26 +4,34 @@ def skip_example(example, board): ex_dir = pathlib.Path('examples/') / example bsp = pathlib.Path("hw/bsp") - board_dir = list(bsp.glob("*/boards/" + board)) - if not board_dir: - # Skip unknown boards - return True - - board_dir = list(board_dir)[0] + # board without family + board_dir = bsp / board - family_dir = board_dir.parent.parent - family = family_dir.name - - # family CMake - family_mk = family_dir / "family.cmake" - - # family.mk - if not family_mk.exists(): - family_mk = family_dir / "family.mk" - - mk_contents = family_mk.read_text() + if board_dir.exists(): + family = "" + mk_contents = "" + else: + # otherwise look into family + board_dir = list(bsp.glob("*/boards/" + board)) + if not board_dir: + # Skip unknown boards + return True + + board_dir = list(board_dir)[0] + + family_dir = board_dir.parent.parent + family = family_dir.name + + # family CMake + family_mk = family_dir / "family.cmake" + + # family.mk + if not family_mk.exists(): + family_mk = family_dir / "family.mk" + + mk_contents = family_mk.read_text() - # Find the mcu + # Find the mcu, first in family mk then board mk if "CFG_TUSB_MCU=OPT_MCU_" not in mk_contents: board_mk = board_dir / "board.cmake" if not board_mk.exists(): -- cgit v1.3.1 From a62c2640b5217e416ba48aa2011d997cfa7d81a5 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 29 Jun 2022 14:08:01 +0700 Subject: remove redundant rp2040 boards, all boards supported by pico-sdk already supported --- hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake | 1 - hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake | 1 - hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake | 1 - 3 files changed, 3 deletions(-) delete mode 100644 hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake delete mode 100644 hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake delete mode 100644 hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake (limited to 'hw') diff --git a/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake b/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake deleted file mode 100644 index e527a8ce3..000000000 --- a/hw/bsp/rp2040/boards/adafruit_feather_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_BOARD adafruit_feather_rp2040) \ No newline at end of file diff --git a/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake b/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake deleted file mode 100644 index 3fd2dd06b..000000000 --- a/hw/bsp/rp2040/boards/adafruit_itsybitsy_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_BOARD adafruit_itsybitsy_rp2040) \ No newline at end of file diff --git a/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake b/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake deleted file mode 100644 index 469929c51..000000000 --- a/hw/bsp/rp2040/boards/adafruit_qtpy_rp2040/board.cmake +++ /dev/null @@ -1 +0,0 @@ -set(PICO_BOARD adafruit_qtpy_rp2040) \ No newline at end of file -- cgit v1.3.1 From 5a378703fbc30d8e7481abec81bc70a9e25761e6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 29 Jun 2022 15:05:09 +0700 Subject: fix end symbol for samx7x and same5x --- examples/device/video_capture/skip.txt | 3 ++- hw/bsp/d5035_01/same51j19a_flash.ld | 1 + hw/mcu/microchip | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'hw') diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index 892a8c6a7..5898664a2 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,2 +1,3 @@ mcu:MSP430x5xx -mcu:SAMD11 \ No newline at end of file +mcu:NUC121 +mcu:SAMD11 diff --git a/hw/bsp/d5035_01/same51j19a_flash.ld b/hw/bsp/d5035_01/same51j19a_flash.ld index 328d1c72f..a8dd44336 100644 --- a/hw/bsp/d5035_01/same51j19a_flash.ld +++ b/hw/bsp/d5035_01/same51j19a_flash.ld @@ -160,4 +160,5 @@ SECTIONS . = ALIGN(4); _end = . ; + end = .; } diff --git a/hw/mcu/microchip b/hw/mcu/microchip index 58eb37632..9e8b37e30 160000 --- a/hw/mcu/microchip +++ b/hw/mcu/microchip @@ -1 +1 @@ -Subproject commit 58eb3763200ff51a998be5f537acf67299add227 +Subproject commit 9e8b37e307d8404033bb881623a113931e1edf27 -- cgit v1.3.1 From 158b3d761d4c0f1da8d60b63d43664e1f52a286d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 29 Jun 2022 15:27:24 +0700 Subject: fix xmc4000 build --- hw/bsp/xmc4000/boards/xmc4500_relax/board.mk | 3 +++ 1 file changed, 3 insertions(+) (limited to 'hw') diff --git a/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk b/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk index a2c2c5aaf..371adff91 100644 --- a/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk +++ b/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk @@ -2,6 +2,9 @@ MCU_VARIANT = XMC4500 CFLAGS += \ -DXMC4500_F100x1024 \ +# mcu driver cause following warnings +CFLAGS += -Wno-error=stringop-overread + LD_FILE = $(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Source/TOOLCHAIN_GCC_ARM/XMC4500x1024.ld JLINK_DEVICE = XMC4500-1024 -- cgit v1.3.1 From 023191be23f736ccebd5eddd75d388ee1edb9e4b Mon Sep 17 00:00:00 2001 From: Pawel Hryniszak Date: Wed, 29 Jun 2022 20:28:22 +0100 Subject: Let to define CFG_BOARD_UART_BAUDRATE in CMake --- hw/bsp/board.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'hw') diff --git a/hw/bsp/board.h b/hw/bsp/board.h index b4e0cb298..339e2e3b5 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -41,7 +41,10 @@ #include "ansi_escape.h" #include "tusb.h" -#define CFG_BOARD_UART_BAUDRATE 115200 +// Define the default baudrate +#ifndef CFG_BOARD_UART_BAUDRATE +#define CFG_BOARD_UART_BAUDRATE 115200 ///< Default baud rate +#endif //--------------------------------------------------------------------+ // Board Porting API -- cgit v1.3.1 From 60c1750a9bd79e46385680b35e12f116808894f7 Mon Sep 17 00:00:00 2001 From: robert-hh Date: Thu, 30 Jun 2022 22:18:23 +0200 Subject: mimxrt: Add/change definitions for MIMXRT11XX boards. These are mostly identical to the MIMXRT10XX, with one tiny difference. --- hw/bsp/board_mcu.h | 2 +- src/class/audio/audio_device.c | 3 ++- src/common/tusb_mcu.h | 2 +- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 5 +++++ src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 2 +- src/tusb_option.h | 1 + 7 files changed, 12 insertions(+), 5 deletions(-) (limited to 'hw') diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index 8202479cb..93b1d595f 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -110,7 +110,7 @@ #elif CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI // no header needed -#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX #include "fsl_device_registers.h" #elif CFG_TUSB_MCU == OPT_MCU_NUC120 diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 6df68c559..ef0f9c4b7 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -66,7 +66,7 @@ // Use ring buffer if it's available, some MCUs need extra RAM requirements #ifndef TUD_AUDIO_PREFER_RING_BUFFER -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX #define TUD_AUDIO_PREFER_RING_BUFFER 0 #else #define TUD_AUDIO_PREFER_RING_BUFFER 1 @@ -103,6 +103,7 @@ CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ CFG_TUSB_MCU == OPT_MCU_LPC43XX || \ CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX || \ CFG_TUSB_MCU == OPT_MCU_MSP432E4 #if TUD_AUDIO_PREFER_RING_BUFFER #define USE_LINEAR_BUFFER 0 diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 383a8d686..37866f2a3 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -75,7 +75,7 @@ // TODO USB0 has 5, USB1 has 6 #define TUP_DCD_ENDPOINT_MAX 6 -#elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX) +#elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX, OPT_MCU_MIMXRT11XX) #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index 78ca5a5a2..a2a0c98f4 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -29,6 +29,11 @@ #include "fsl_device_registers.h" +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX +#define USB1_BASE USB_OTG1_BASE +#define USB2_BASE USB_OTG2_BASE +#endif + static const ci_hs_controller_t _ci_controller[] = { // RT1010 and RT1020 only has 1 USB controller diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 41d2f1870..0925215ae 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -34,7 +34,7 @@ #include "device/dcd.h" #include "ci_hs_type.h" -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX #include "ci_hs_imxrt.h" #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) #include "ci_hs_lpc18_43.h" diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 221721b0f..39b490f72 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -29,7 +29,7 @@ // Chipidea Highspeed USB IP implement EHCI for host functionality #if CFG_TUH_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX) + (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX) //--------------------------------------------------------------------+ // INCLUDE diff --git a/src/tusb_option.h b/src/tusb_option.h index 206d23e72..0749a5e52 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -99,6 +99,7 @@ typedef int make_iso_compilers_happy; // NXP iMX RT #define OPT_MCU_MIMXRT10XX 700 ///< NXP iMX RT10xx +#define OPT_MCU_MIMXRT11XX 701 ///< NXP iMX RT11xx // Nuvoton #define OPT_MCU_NUC121 800 -- cgit v1.3.1 From ec6f56768a03fcc43158b0d429e8b826825d02f7 Mon Sep 17 00:00:00 2001 From: robert-hh Date: Fri, 1 Jul 2022 08:42:46 +0200 Subject: mimxrt: Change OPT_MCU_MIMXRT1xXX to OPT_MCU_MIMXRT. Which fits both MIMXRT10XX and MIMXRT11XX. --- hw/bsp/board_mcu.h | 2 +- hw/bsp/f1c100s/README.md | 2 +- hw/bsp/imxrt/family.mk | 2 +- src/class/audio/audio_device.c | 5 ++--- src/common/tusb_mcu.h | 2 +- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 2 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 4 ++-- src/portable/nxp/transdimension/dcd_transdimension.c | 6 +++--- src/portable/nxp/transdimension/hcd_transdimension.c | 6 +++--- src/tusb_option.h | 4 ++-- 11 files changed, 18 insertions(+), 19 deletions(-) (limited to 'hw') diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index 93b1d595f..5c309a21d 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -110,7 +110,7 @@ #elif CFG_TUSB_MCU == OPT_MCU_VALENTYUSB_EPTRI // no header needed -#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX +#elif CFG_TUSB_MCU == OPT_MCU_MIMXRT #include "fsl_device_registers.h" #elif CFG_TUSB_MCU == OPT_MCU_NUC120 diff --git a/hw/bsp/f1c100s/README.md b/hw/bsp/f1c100s/README.md index 325044716..4aa1e153b 100644 --- a/hw/bsp/f1c100s/README.md +++ b/hw/bsp/f1c100s/README.md @@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re ## TODO -* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX` high speed MCU check in examples (maybe we should extract the logic?) \ No newline at end of file +* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?) \ No newline at end of file diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk index 0a55b740b..846ecd255 100644 --- a/hw/bsp/imxrt/family.mk +++ b/hw/bsp/imxrt/family.mk @@ -13,7 +13,7 @@ CFLAGS += \ -D__ARMVFP__=0 -D__ARMFPV5__=0\ -DXIP_EXTERNAL_FLASH=1 \ -DXIP_BOOT_HEADER_ENABLE=1 \ - -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT ifdef BOARD_TUD_RHPORT CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT) diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index ef0f9c4b7..473d1e910 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -66,7 +66,7 @@ // Use ring buffer if it's available, some MCUs need extra RAM requirements #ifndef TUD_AUDIO_PREFER_RING_BUFFER -#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX +#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT #define TUD_AUDIO_PREFER_RING_BUFFER 0 #else #define TUD_AUDIO_PREFER_RING_BUFFER 1 @@ -102,8 +102,7 @@ CFG_TUSB_MCU == OPT_MCU_GD32VF103 || \ CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ CFG_TUSB_MCU == OPT_MCU_LPC43XX || \ - CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX || \ + CFG_TUSB_MCU == OPT_MCU_MIMXRT || \ CFG_TUSB_MCU == OPT_MCU_MSP432E4 #if TUD_AUDIO_PREFER_RING_BUFFER #define USE_LINEAR_BUFFER 0 diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 37866f2a3..baa82fc14 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -75,7 +75,7 @@ // TODO USB0 has 5, USB1 has 6 #define TUP_DCD_ENDPOINT_MAX 6 -#elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX, OPT_MCU_MIMXRT11XX) +#elif TU_CHECK_MCU(OPT_MCU_MIMXRT) #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index a2a0c98f4..53bc8bd00 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -29,7 +29,7 @@ #include "fsl_device_registers.h" -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX +#if !defined(USB1_BASE) && defined(USB_OTG1_BASE) #define USB1_BASE USB_OTG1_BASE #define USB2_BASE USB_OTG2_BASE #endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 0925215ae..c7cc3e0e8 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -34,7 +34,7 @@ #include "device/dcd.h" #include "ci_hs_type.h" -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT #include "ci_hs_imxrt.h" #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) #include "ci_hs_lpc18_43.h" diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 39b490f72..d0396daea 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -29,7 +29,7 @@ // Chipidea Highspeed USB IP implement EHCI for host functionality #if CFG_TUH_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT11XX) + (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT) //--------------------------------------------------------------------+ // INCLUDE @@ -39,7 +39,7 @@ #include "portable/ehci/ehci_api.h" #include "ci_hs_type.h" -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT #include "ci_hs_imxrt.h" #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) #include "ci_hs_lpc18_43.h" diff --git a/src/portable/nxp/transdimension/dcd_transdimension.c b/src/portable/nxp/transdimension/dcd_transdimension.c index 2347e1dae..1f27a6872 100644 --- a/src/portable/nxp/transdimension/dcd_transdimension.c +++ b/src/portable/nxp/transdimension/dcd_transdimension.c @@ -27,14 +27,14 @@ #include "tusb_option.h" #if CFG_TUD_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX) + (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT) #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly" //--------------------------------------------------------------------+ // INCLUDE //--------------------------------------------------------------------+ -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT #include "fsl_device_registers.h" #define INCLUDE_FSL_DEVICE_REGISTERS #else @@ -153,7 +153,7 @@ typedef struct const uint8_t ep_count; // Max bi-directional Endpoints }dcd_controller_t; -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT static const dcd_controller_t _dcd_controller[] = { // RT1010 and RT1020 only has 1 USB controller diff --git a/src/portable/nxp/transdimension/hcd_transdimension.c b/src/portable/nxp/transdimension/hcd_transdimension.c index 2d0830981..392764ff6 100644 --- a/src/portable/nxp/transdimension/hcd_transdimension.c +++ b/src/portable/nxp/transdimension/hcd_transdimension.c @@ -29,14 +29,14 @@ // NXP Trans-Dimension USB IP implement EHCI for host functionality #if CFG_TUH_ENABLED && \ - (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX) + (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT) #warning "transdimenion is renamed to chipidea (portable/chipidea/ci_hs) to match other opensource naming convention such as linux. This file will be removed in the future, please update your makefile accordingly" //--------------------------------------------------------------------+ // INCLUDE //--------------------------------------------------------------------+ -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT #include "fsl_device_registers.h" #else // LPCOpen for 18xx & 43xx @@ -58,7 +58,7 @@ typedef struct const IRQn_Type irqnum; // IRQ number }hcd_controller_t; -#if CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX +#if CFG_TUSB_MCU == OPT_MCU_MIMXRT static const hcd_controller_t _hcd_controller[] = { // RT1010 and RT1020 only has 1 USB controller diff --git a/src/tusb_option.h b/src/tusb_option.h index 0749a5e52..a030197f6 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -98,8 +98,8 @@ typedef int make_iso_compilers_happy; #define OPT_MCU_VALENTYUSB_EPTRI 600 ///< Fomu eptri config // NXP iMX RT -#define OPT_MCU_MIMXRT10XX 700 ///< NXP iMX RT10xx -#define OPT_MCU_MIMXRT11XX 701 ///< NXP iMX RT11xx +#define OPT_MCU_MIMXRT 700 ///< NXP iMX RT Series +#define OPT_MCU_MIMXRT10XX OPT_MCU_MIMXRT // Nuvoton #define OPT_MCU_NUC121 800 -- cgit v1.3.1 From 53db23142a89def1ad2f866863a559a931eeb035 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 1 Jul 2022 17:23:14 +0700 Subject: add get-dependencies.py --- .github/workflows/build_aarch64.yml | 3 +++ .github/workflows/build_arm.yml | 15 ++++++--------- .github/workflows/build_msp430.yml | 3 +++ .github/workflows/build_renesas.yml | 3 +++ .github/workflows/build_riscv.yml | 3 +++ hw/bsp/rp2040/family.mk | 2 ++ tools/get_dependencies.py | 25 +++++++++++++++++++++++++ 7 files changed, 45 insertions(+), 9 deletions(-) create mode 100644 tools/get_dependencies.py (limited to 'hw') diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml index 1720ba592..b4ea8a0eb 100644 --- a/.github/workflows/build_aarch64.yml +++ b/.github/workflows/build_aarch64.yml @@ -55,6 +55,9 @@ jobs: - name: Set Toolchain Path run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + - name: Get Dependencies + run: python3 tools/get_dependencies.py ${{ matrix.family }} + - name: Build run: python3 tools/build_family.py ${{ matrix.family }} diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 935d57e06..4297ba895 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -89,12 +89,9 @@ jobs: run: | git clone --depth 1 -b develop https://github.com/raspberrypi/pico-sdk ~/pico-sdk echo >> $GITHUB_ENV PICO_SDK_PATH=~/pico-sdk - git submodule update --init hw/mcu/raspberry_pi/Pico-PIO-USB - name: Get Dependencies - run: | - b=`find hw/bsp/${{ matrix.family }}/boards -depth -maxdepth 1 -type d -name '[^.]?*' -printf %f -quit` - make -C examples/device/board_test BOARD=${b} get-deps + run: python3 tools/get_dependencies.py ${{ matrix.family }} - name: Build run: python3 tools/build_family.py ${{ matrix.family }} @@ -127,16 +124,16 @@ jobs: - name: Setup Python uses: actions/setup-python@v3 + - name: Install ARM GCC + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '11.2-2022.02' + - name: Checkout TinyUSB uses: actions/checkout@v3 - name: Checkout common submodules in lib run: git submodule update --init lib/FreeRTOS-Kernel lib/lwip - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '11.2-2022.02' - - name: Build run: python3 tools/build_board.py ${{ matrix.example }} diff --git a/.github/workflows/build_msp430.yml b/.github/workflows/build_msp430.yml index 6a468ab04..ea93f09a0 100644 --- a/.github/workflows/build_msp430.yml +++ b/.github/workflows/build_msp430.yml @@ -52,6 +52,9 @@ jobs: - name: Set Toolchain Path run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + - name: Get Dependencies + run: python3 tools/get_dependencies.py ${{ matrix.family }} + - name: Build run: python3 tools/build_family.py ${{ matrix.family }} diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index 50618ff6b..2563d3549 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -53,6 +53,9 @@ jobs: - name: Set Toolchain Path run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + - name: Get Dependencies + run: python3 tools/get_dependencies.py ${{ matrix.family }} + - name: Build run: python3 tools/build_family.py ${{ matrix.family }} diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml index 2d670138d..90dc35206 100644 --- a/.github/workflows/build_riscv.yml +++ b/.github/workflows/build_riscv.yml @@ -53,6 +53,9 @@ jobs: - name: Set Toolchain Path run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + - name: Get Dependencies + run: python3 tools/get_dependencies.py ${{ matrix.family }} + - name: Build run: python3 tools/build_family.py ${{ matrix.family }} diff --git a/hw/bsp/rp2040/family.mk b/hw/bsp/rp2040/family.mk index 5db784b14..cf6b53793 100644 --- a/hw/bsp/rp2040/family.mk +++ b/hw/bsp/rp2040/family.mk @@ -1,6 +1,8 @@ JLINK_DEVICE = rp2040_m0_0 PYOCD_TARGET = rp2040 +DEPS_SUBMODULES += hw/mcu/raspberry_pi/Pico-PIO-USB + ifeq ($(DEBUG), 1) CMAKE_DEFSYM += -DCMAKE_BUILD_TYPE=Debug endif diff --git a/tools/get_dependencies.py b/tools/get_dependencies.py new file mode 100644 index 000000000..e7d3e0a76 --- /dev/null +++ b/tools/get_dependencies.py @@ -0,0 +1,25 @@ +import os +import sys +import subprocess + + +# dependency lookup (ABC sorted) +# deps = { +# 'LPC11UXX' : [ [] ] +# } + + +def get_family_dep(family): + for entry in os.scandir("hw/bsp/{}/boards".format(family)): + if entry.is_dir(): + result = subprocess.run("make -C examples/device/board_test BOARD={} get-deps".format(entry.name), + shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + print(result.stdout.decode("utf-8")) + return result.returncode + +status = 0 +all_family = sys.argv[1:] +for f in all_family: + status += get_family_dep(f) + +sys.exit(status) \ No newline at end of file -- cgit v1.3.1 From 19768936ae6379b4c86947f70ab5cf2c0f8ed8f4 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Jul 2022 14:01:18 +0700 Subject: bump up mcux-sdk for rt11xx, add back OPT_MCU_MIMXRT11XX --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + hw/mcu/nxp/mcux-sdk | 2 +- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 3 +++ src/tusb_option.h | 5 +++-- 6 files changed, 10 insertions(+), 3 deletions(-) (limited to 'hw') diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 7fe4e3f5c..da3ffdd19 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -4,6 +4,7 @@ mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX mcu:MIMXRT10XX +mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 7fe4e3f5c..da3ffdd19 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -4,6 +4,7 @@ mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX mcu:MIMXRT10XX +mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 7fe4e3f5c..da3ffdd19 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -4,6 +4,7 @@ mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX mcu:MIMXRT10XX +mcu:MIMXRT11XX mcu:RP2040 mcu:MSP432E4 mcu:RX65X diff --git a/hw/mcu/nxp/mcux-sdk b/hw/mcu/nxp/mcux-sdk index cb21c6609..ae2ab01d9 160000 --- a/hw/mcu/nxp/mcux-sdk +++ b/hw/mcu/nxp/mcux-sdk @@ -1 +1 @@ -Subproject commit cb21c660991c92e90ece99ccb63a4bc611899c3a +Subproject commit ae2ab01d9d70ad00cd0e935c2552bd5f0e5c0294 diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index 53bc8bd00..2de0d9cb4 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -31,6 +31,9 @@ #if !defined(USB1_BASE) && defined(USB_OTG1_BASE) #define USB1_BASE USB_OTG1_BASE +#endif + +#if !defined(USB2_BASE) && defined(USB_OTG2_BASE) #define USB2_BASE USB_OTG2_BASE #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index a030197f6..70ef1c399 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -98,8 +98,9 @@ typedef int make_iso_compilers_happy; #define OPT_MCU_VALENTYUSB_EPTRI 600 ///< Fomu eptri config // NXP iMX RT -#define OPT_MCU_MIMXRT 700 ///< NXP iMX RT Series -#define OPT_MCU_MIMXRT10XX OPT_MCU_MIMXRT +#define OPT_MCU_MIMXRT 700 ///< NXP iMX RT Series +#define OPT_MCU_MIMXRT10XX OPT_MCU_MIMXRT ///< RT10xx +#define OPT_MCU_MIMXRT11XX OPT_MCU_MIMXRT ///< RT11xx // Nuvoton #define OPT_MCU_NUC121 800 -- cgit v1.3.1 From 6da1e93edd4547a5ec5a1681cd1cb31803564993 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Jul 2022 14:21:19 +0700 Subject: fix rt1050 evk build with latest mcu-sdk --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h | 4 ++-- 4 files changed, 5 insertions(+), 2 deletions(-) (limited to 'hw') diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index da3ffdd19..fa9c14857 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -3,6 +3,7 @@ mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX +mcu:MIMXRT mcu:MIMXRT10XX mcu:MIMXRT11XX mcu:RP2040 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index da3ffdd19..fa9c14857 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -3,6 +3,7 @@ mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX +mcu:MIMXRT mcu:MIMXRT10XX mcu:MIMXRT11XX mcu:RP2040 diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index da3ffdd19..fa9c14857 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -3,6 +3,7 @@ mcu:LPC177X_8X mcu:LPC18XX mcu:LPC40XX mcu:LPC43XX +mcu:MIMXRT mcu:MIMXRT10XX mcu:MIMXRT11XX mcu:RP2040 diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 928fbd727..0472f608c 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -45,7 +45,7 @@ // UART #define UART_PORT LPUART1 -#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX -#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RXD +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TXD #endif /* BOARD_H_ */ -- cgit v1.3.1 From fc1a27b6c9d5a19529d6ac968164f2734ea89023 Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Tue, 12 Jul 2022 12:58:30 -0500 Subject: RP@040: rework CMake for compiler warnings --- examples/device/audio_4_channel_mic/CMakeLists.txt | 3 - examples/device/audio_test/CMakeLists.txt | 3 - examples/device/board_test/CMakeLists.txt | 3 - examples/device/cdc_dual_ports/CMakeLists.txt | 3 - examples/device/cdc_msc/CMakeLists.txt | 3 - examples/device/dfu/CMakeLists.txt | 3 - examples/device/dfu_runtime/CMakeLists.txt | 3 - .../device/dynamic_configuration/CMakeLists.txt | 3 - examples/device/hid_boot_interface/CMakeLists.txt | 3 - examples/device/hid_composite/CMakeLists.txt | 3 - examples/device/hid_generic_inout/CMakeLists.txt | 3 - .../device/hid_multiple_interface/CMakeLists.txt | 3 - examples/device/midi_test/CMakeLists.txt | 3 - examples/device/msc_dual_lun/CMakeLists.txt | 3 - examples/device/net_lwip_webserver/CMakeLists.txt | 3 - examples/device/uac2_headset/CMakeLists.txt | 3 - examples/device/usbtmc/CMakeLists.txt | 3 - examples/device/video_capture/CMakeLists.txt | 3 - examples/device/webusb_serial/CMakeLists.txt | 3 - .../dual/host_hid_to_device_cdc/CMakeLists.txt | 9 +-- examples/example.cmake | 32 ---------- examples/host/bare_api/CMakeLists.txt | 3 - examples/host/cdc_msc_hid/CMakeLists.txt | 3 - examples/host/hid_controller/CMakeLists.txt | 3 - hw/bsp/family_support.cmake | 37 +++++++++++ hw/bsp/rp2040/family.cmake | 71 +++++++++++++--------- src/portable/raspberrypi/rp2040/rp2040_usb.c | 2 + 27 files changed, 85 insertions(+), 132 deletions(-) delete mode 100644 examples/example.cmake (limited to 'hw') diff --git a/examples/device/audio_4_channel_mic/CMakeLists.txt b/examples/device/audio_4_channel_mic/CMakeLists.txt index e6ce2813e..f6e10e2ea 100644 --- a/examples/device/audio_4_channel_mic/CMakeLists.txt +++ b/examples/device/audio_4_channel_mic/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) diff --git a/examples/device/audio_test/CMakeLists.txt b/examples/device/audio_test/CMakeLists.txt index 416b91665..cb321f9a8 100644 --- a/examples/device/audio_test/CMakeLists.txt +++ b/examples/device/audio_test/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/board_test/CMakeLists.txt b/examples/device/board_test/CMakeLists.txt index ac530a928..37113578e 100644 --- a/examples/device/board_test/CMakeLists.txt +++ b/examples/device/board_test/CMakeLists.txt @@ -36,9 +36,6 @@ else() ${CMAKE_CURRENT_SOURCE_DIR}/src ) - # Example common such as compiler warnings - include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) diff --git a/examples/device/cdc_dual_ports/CMakeLists.txt b/examples/device/cdc_dual_ports/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/cdc_dual_ports/CMakeLists.txt +++ b/examples/device/cdc_dual_ports/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 04c7c1b26..fa6e83b7e 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -24,9 +24,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dfu/CMakeLists.txt b/examples/device/dfu/CMakeLists.txt index 121ab3852..acaa54198 100644 --- a/examples/device/dfu/CMakeLists.txt +++ b/examples/device/dfu/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) diff --git a/examples/device/dfu_runtime/CMakeLists.txt b/examples/device/dfu_runtime/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/dfu_runtime/CMakeLists.txt +++ b/examples/device/dfu_runtime/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/dynamic_configuration/CMakeLists.txt b/examples/device/dynamic_configuration/CMakeLists.txt index 04c7c1b26..fa6e83b7e 100644 --- a/examples/device/dynamic_configuration/CMakeLists.txt +++ b/examples/device/dynamic_configuration/CMakeLists.txt @@ -24,9 +24,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_boot_interface/CMakeLists.txt b/examples/device/hid_boot_interface/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/hid_boot_interface/CMakeLists.txt +++ b/examples/device/hid_boot_interface/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_generic_inout/CMakeLists.txt b/examples/device/hid_generic_inout/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/hid_generic_inout/CMakeLists.txt +++ b/examples/device/hid_generic_inout/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/hid_multiple_interface/CMakeLists.txt b/examples/device/hid_multiple_interface/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/hid_multiple_interface/CMakeLists.txt +++ b/examples/device/hid_multiple_interface/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/midi_test/CMakeLists.txt b/examples/device/midi_test/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/midi_test/CMakeLists.txt +++ b/examples/device/midi_test/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/msc_dual_lun/CMakeLists.txt b/examples/device/msc_dual_lun/CMakeLists.txt index 518eac3ad..9e834ae21 100644 --- a/examples/device/msc_dual_lun/CMakeLists.txt +++ b/examples/device/msc_dual_lun/CMakeLists.txt @@ -24,9 +24,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/net_lwip_webserver/CMakeLists.txt b/examples/device/net_lwip_webserver/CMakeLists.txt index 0f41b888a..9fe1a325e 100644 --- a/examples/device/net_lwip_webserver/CMakeLists.txt +++ b/examples/device/net_lwip_webserver/CMakeLists.txt @@ -69,9 +69,6 @@ if (EXISTS ${TOP}/lib/lwip/src) ${TOP}/lib/networking/rndis_reports.c ) - # Example common such as compiler warnings - include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # due to warnings from other net source, we need to prevent error from some of the warnings options target_compile_options(${PROJECT} PUBLIC -Wno-error=null-dereference diff --git a/examples/device/uac2_headset/CMakeLists.txt b/examples/device/uac2_headset/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/uac2_headset/CMakeLists.txt +++ b/examples/device/uac2_headset/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/usbtmc/CMakeLists.txt b/examples/device/usbtmc/CMakeLists.txt index 74f81b24f..c49603c26 100644 --- a/examples/device/usbtmc/CMakeLists.txt +++ b/examples/device/usbtmc/CMakeLists.txt @@ -24,9 +24,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/video_capture/CMakeLists.txt b/examples/device/video_capture/CMakeLists.txt index 416b91665..cb321f9a8 100644 --- a/examples/device/video_capture/CMakeLists.txt +++ b/examples/device/video_capture/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/device/webusb_serial/CMakeLists.txt b/examples/device/webusb_serial/CMakeLists.txt index 438635958..abc4d91da 100644 --- a/examples/device/webusb_serial/CMakeLists.txt +++ b/examples/device/webusb_serial/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_device_example(${PROJECT}) \ No newline at end of file diff --git a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt index 909ee423f..fc9bbfc13 100644 --- a/examples/dual/host_hid_to_device_cdc/CMakeLists.txt +++ b/examples/dual/host_hid_to_device_cdc/CMakeLists.txt @@ -23,8 +23,9 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) +# Configure compilation flags and libraries for the example... see the corresponding function +# in hw/bsp/FAMILY/family.cmake for details. +family_configure_dual_usb_example(${PROJECT}) # due to warnings from other net source, we need to prevent error from some of the warnings options target_compile_options(${PROJECT} PUBLIC @@ -37,7 +38,3 @@ target_compile_options(${PROJECT} PUBLIC -Wno-error=sign-compare -Wno-error=unused-function ) - -# Configure compilation flags and libraries for the example... see the corresponding function -# in hw/bsp/FAMILY/family.cmake for details. -family_configure_dual_usb_example(${PROJECT}) diff --git a/examples/example.cmake b/examples/example.cmake deleted file mode 100644 index 6b5e41dd9..000000000 --- a/examples/example.cmake +++ /dev/null @@ -1,32 +0,0 @@ -target_compile_options(${PROJECT} PUBLIC - -Wall - -Wextra - -Werror - -Wfatal-errors - -Wdouble-promotion - -Wfloat-equal - -Wshadow - -Wwrite-strings - -Wsign-compare - -Wmissing-format-attribute - -Wunreachable-code - -Wcast-align - -Wcast-qual - -Wnull-dereference - -Wuninitialized - -Wunused - -Wredundant-decls - #-Wstrict-prototypes - #-Werror-implicit-function-declaration - #-Wundef - ) - -# GCC 10 -if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) - target_compile_options(${PROJECT} PUBLIC -Wconversion) -endif() - -# GCC 8 -if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) - target_compile_options(${PROJECT} PUBLIC -Wcast-function-type -Wstrict-overflow) -endif() diff --git a/examples/host/bare_api/CMakeLists.txt b/examples/host/bare_api/CMakeLists.txt index 98540ffb0..bc04b01a7 100644 --- a/examples/host/bare_api/CMakeLists.txt +++ b/examples/host/bare_api/CMakeLists.txt @@ -22,9 +22,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT}) diff --git a/examples/host/cdc_msc_hid/CMakeLists.txt b/examples/host/cdc_msc_hid/CMakeLists.txt index 6990e957b..c4a4d8e63 100644 --- a/examples/host/cdc_msc_hid/CMakeLists.txt +++ b/examples/host/cdc_msc_hid/CMakeLists.txt @@ -24,9 +24,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT}) diff --git a/examples/host/hid_controller/CMakeLists.txt b/examples/host/hid_controller/CMakeLists.txt index eefeb4a49..6153d399a 100644 --- a/examples/host/hid_controller/CMakeLists.txt +++ b/examples/host/hid_controller/CMakeLists.txt @@ -23,9 +23,6 @@ target_include_directories(${PROJECT} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) -# Example common such as compiler warnings -include(${CMAKE_CURRENT_SOURCE_DIR}/../../example.cmake) - # Configure compilation flags and libraries for the example... see the corresponding function # in hw/bsp/FAMILY/family.cmake for details. family_configure_host_example(${PROJECT}) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index ee29caba7..75bd97cb6 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -79,6 +79,43 @@ if (NOT TARGET _family_support_marker) endif() endfunction() + function(family_add_default_example_warnings TARGET) + target_compile_options(${TARGET} PUBLIC + -Wall + -Wextra + -Werror + -Wfatal-errors + -Wdouble-promotion + -Wfloat-equal + -Wshadow + -Wwrite-strings + -Wsign-compare + -Wmissing-format-attribute + -Wunreachable-code + -Wcast-align + -Wcast-qual + -Wnull-dereference + -Wuninitialized + -Wunused + -Wredundant-decls + #-Wstrict-prototypes + #-Werror-implicit-function-declaration + #-Wundef + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + # GCC 10 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 10.0) + target_compile_options(${TARGET} PUBLIC -Wconversion) + endif() + + # GCC 8 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) + target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) + endif() + endif() + endfunction() + # configure an executable target to link to tinyusb in device mode, and add the board implementation function(family_configure_device_example TARGET) # default implentation is empty, the function should be redefined in the FAMILY/family.cmake diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 530d80fec..31e97d9af 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -147,16 +147,23 @@ if (NOT TARGET _rp2040_family_inclusion_marker) target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board tinyusb_additions) endfunction() + function(rp2040_family_configure_example_warnings TARGET) + if (NOT PICO_TINYUSB_NO_EXAMPLE_WARNINGS) + family_add_default_example_warnings(${TARGET}) + endif() + suppress_tinyusb_warnings() + endfunction() + function(family_configure_device_example TARGET) family_configure_target(${TARGET}) target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device) - suppress_tinyusb_warnings() + rp2040_family_configure_example_warnings(${TARGET}) endfunction() function(family_configure_host_example TARGET) family_configure_target(${TARGET}) target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host) - suppress_tinyusb_warnings() + rp2040_family_configure_example_warnings(${TARGET}) endfunction() function(family_add_pico_pio_usb TARGET) @@ -167,7 +174,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) family_configure_target(${TARGET}) # require tinyusb_pico_pio_usb target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_host tinyusb_pico_pio_usb ) - suppress_tinyusb_warnings() + rp2040_family_configure_example_warnings(${TARGET}) endfunction() function(check_and_add_pico_pio_usb_support) @@ -236,30 +243,38 @@ if (NOT TARGET _rp2040_family_inclusion_marker) # This method must be called from the project scope to suppress known warnings in TinyUSB source files function(suppress_tinyusb_warnings) # some of these are pretty silly warnings only occurring in some older GCC versions 9 or prior - if (CMAKE_C_COMPILER_VERSION VERSION_LESS 10.0) - set(CONVERSION_WARNING_FILES - ${PICO_TINYUSB_PATH}/src/tusb.c - ${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c - ${PICO_TINYUSB_PATH}/src/device/usbd.c - ${PICO_TINYUSB_PATH}/src/device/usbd_control.c - ${PICO_TINYUSB_PATH}/src/host/usbh.c - ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c - ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_host.c - ${PICO_TINYUSB_PATH}/src/class/hid/hid_device.c - ${PICO_TINYUSB_PATH}/src/class/hid/hid_host.c - ${PICO_TINYUSB_PATH}/src/class/audio/audio_device.c - ${PICO_TINYUSB_PATH}/src/class/dfu/dfu_device.c - ${PICO_TINYUSB_PATH}/src/class/dfu/dfu_rt_device.c - ${PICO_TINYUSB_PATH}/src/class/midi/midi_device.c - ${PICO_TINYUSB_PATH}/src/class/usbtmc/usbtmc_device.c - ${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/hcd_rp2040.c - ) - foreach(SOURCE_FILE IN LISTS CONVERSION_WARNING_FILES) - set_source_files_properties( - ${SOURCE_FILE} - PROPERTIES - COMPILE_FLAGS "-Wno-conversion") - endforeach() - endif() + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_VERSION VERSION_LESS 10.0) + set(CONVERSION_WARNING_FILES + ${PICO_TINYUSB_PATH}/src/tusb.c + ${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c + ${PICO_TINYUSB_PATH}/src/device/usbd.c + ${PICO_TINYUSB_PATH}/src/device/usbd_control.c + ${PICO_TINYUSB_PATH}/src/host/usbh.c + ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c + ${PICO_TINYUSB_PATH}/src/class/cdc/cdc_host.c + ${PICO_TINYUSB_PATH}/src/class/hid/hid_device.c + ${PICO_TINYUSB_PATH}/src/class/hid/hid_host.c + ${PICO_TINYUSB_PATH}/src/class/audio/audio_device.c + ${PICO_TINYUSB_PATH}/src/class/dfu/dfu_device.c + ${PICO_TINYUSB_PATH}/src/class/dfu/dfu_rt_device.c + ${PICO_TINYUSB_PATH}/src/class/midi/midi_device.c + ${PICO_TINYUSB_PATH}/src/class/usbtmc/usbtmc_device.c + ${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/hcd_rp2040.c + ) + foreach(SOURCE_FILE IN LISTS CONVERSION_WARNING_FILES) + set_source_files_properties( + ${SOURCE_FILE} + PROPERTIES + COMPILE_FLAGS "-Wno-conversion") + endforeach() + endif() + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 11.0) + set_source_files_properties( + ${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/rp2040_usb.c + PROPERTIES + COMPILE_FLAGS "-Wno-stringop-overflow -Wno-array-bounds") + endif() + endif() endfunction() endif() diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 49be90167..25c013bd2 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -60,7 +60,9 @@ void rp2040_usb_init(void) // Clear any previous state just in case #pragma GCC diagnostic push #pragma GCC diagnostic ignored "-Warray-bounds" +#if __GNUC__ > 6 #pragma GCC diagnostic ignored "-Wstringop-overflow" +#endif memset(usb_hw, 0, sizeof(*usb_hw)); memset(usb_dpram, 0, sizeof(*usb_dpram)); #pragma GCC diagnostic pop -- cgit v1.3.1 From 4bd47bcb99eef7a71ba2d45842af43e6269c30d4 Mon Sep 17 00:00:00 2001 From: graham sanderson Date: Tue, 12 Jul 2022 13:29:47 -0500 Subject: disable bad gcc 6 warning --- hw/bsp/family_support.cmake | 5 +++++ src/host/usbh.c | 2 ++ 2 files changed, 7 insertions(+) (limited to 'hw') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 75bd97cb6..c5311b63f 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -113,6 +113,11 @@ if (NOT TARGET _family_support_marker) if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 8.0) target_compile_options(${TARGET} PUBLIC -Wcast-function-type -Wstrict-overflow) endif() + + # GCC 6 + if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 6.0) + target_compile_options(${TARGET} PUBLIC -Wno-strict-aliasing) + endif() endif() endfunction() diff --git a/src/host/usbh.c b/src/host/usbh.c index 0415a26cb..26351d16a 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -655,7 +655,9 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result TU_ASSERT( hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength) ); return true; } +#if __GNUC__ >= 7 __attribute__((fallthrough)); +#endif case CONTROL_STAGE_DATA: if (request->wLength) -- cgit v1.3.1 From d1c61e33a617439258605555947a1ffc78519674 Mon Sep 17 00:00:00 2001 From: Peter Lawrence <12226419+majbthrd@users.noreply.github.com> Date: Wed, 3 Aug 2022 12:28:50 -0500 Subject: add 'stm32l052dap52' (STM32L052K8 MCU) board target 'dap52' is Olimex's name of their STM32L052-based fork of 'dap42' --- examples/device/uac2_headset/skip.txt | 3 +- .../boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld | 169 +++++++++++ hw/bsp/stm32l0/boards/stm32l052dap52/board.h | 109 +++++++ hw/bsp/stm32l0/boards/stm32l052dap52/board.mk | 11 + hw/bsp/stm32l0/family.c | 181 +++++++++++ hw/bsp/stm32l0/family.mk | 40 +++ hw/bsp/stm32l0/stm32l0xx_hal_conf.h | 338 +++++++++++++++++++++ 7 files changed, 850 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld create mode 100644 hw/bsp/stm32l0/boards/stm32l052dap52/board.h create mode 100644 hw/bsp/stm32l0/boards/stm32l052dap52/board.mk create mode 100644 hw/bsp/stm32l0/family.c create mode 100644 hw/bsp/stm32l0/family.mk create mode 100644 hw/bsp/stm32l0/stm32l0xx_hal_conf.h (limited to 'hw') diff --git a/examples/device/uac2_headset/skip.txt b/examples/device/uac2_headset/skip.txt index 9471822a4..70d8e8838 100644 --- a/examples/device/uac2_headset/skip.txt +++ b/examples/device/uac2_headset/skip.txt @@ -3,4 +3,5 @@ mcu:LPC13XX mcu:NUC121 mcu:SAMD11 mcu:SAME5X -mcu:SAMG \ No newline at end of file +mcu:SAMG +board:stm32l052dap52 diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld new file mode 100644 index 000000000..1bc16cc7b --- /dev/null +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld @@ -0,0 +1,169 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32L052K8Ux Device with +** 64KByte FLASH, 8KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20002000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h new file mode 100644 index 000000000..8ad3e43c8 --- /dev/null +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h @@ -0,0 +1,109 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_4 +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_6 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART2 +#define UART_CLK_EN __HAL_RCC_USART2_CLK_ENABLE +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF4_USART2 +#define UART_TX_PIN GPIO_PIN_2 +#define UART_RX_PIN GPIO_PIN_3 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32l0_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + static RCC_CRSInitTypeDef RCC_CRSInitStruct; + + /* Enable HSI Oscillator to be used as System clock source + Enable HSI48 Oscillator to be used as USB clock source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select HSI48 as USB clock source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 + clock dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); + + /*Configure the clock recovery system (CRS)**********************************/ + + /*Enable CRS Clock*/ + __HAL_RCC_CRS_CLK_ENABLE(); + + /* Default Synchro Signal division factor (not divided) */ + RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; + /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ + RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; + /* HSI48 is synchronized with USB SOF at 1KHz rate */ + RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); + RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; + /* Set the TRIM[5:0] to the default value*/ + RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; + /* Start automatic synchronization */ + HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); +} + +static inline void board_vbus_sense_init(void) +{ +} + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk b/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk new file mode 100644 index 000000000..84662344d --- /dev/null +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.mk @@ -0,0 +1,11 @@ +CFLAGS += -DSTM32L052xx -DCFG_EXAMPLE_VIDEO_READONLY + +LD_FILE = $(BOARD_PATH)/STM32L052K8Ux_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l052xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32l052k8 + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c new file mode 100644 index 000000000..80a7c7435 --- /dev/null +++ b/hw/bsp/stm32l0/family.c @@ -0,0 +1,181 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32l0xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +UART_HandleTypeDef UartHandle; + +void board_init(void) +{ + board_stm32l0_clock_init(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + + // Enable UART Clock + UART_CLK_EN(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // Explicitly disable systick to prevent its ISR runs before scheduler start + SysTick->CTRL &= ~1U; + + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + // LED + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UART_DEV; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + + // USB Pins + // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // USB Clock enable + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*)(uintptr_t) buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + (void) file; (void) line; + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk new file mode 100644 index 000000000..622fa61e0 --- /dev/null +++ b/hw/bsp/stm32l0/family.mk @@ -0,0 +1,40 @@ +ST_FAMILY = l0 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_EXAMPLE_VIDEO_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_STM32L0 + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-align -Wno-error=maybe-uninitialized + +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM0 diff --git a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h new file mode 100644 index 000000000..cc20ea8e0 --- /dev/null +++ b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h @@ -0,0 +1,338 @@ +/** + ****************************************************************************** + * @file stm32l0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32l0xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L0xx_HAL_CONF_H +#define __STM32L0xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/*#define HAL_FIREWALL_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +/*#define HAL_I2C_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_LCD_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE ((uint32_t)2097152U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator for USB (HSI48) value. + */ +#if !defined (HSI48_VALUE) +#define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. + The real value may vary depending on the variations + in voltage and temperature. */ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define PREREAD_ENABLE 0U +#define BUFFER_CACHE_DISABLE 0U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + + +/* ################## Register callback feature configuration ############### */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/deregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32l0xx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U +#define USE_HAL_UART_REGISTER_CALLBACKS 0U +#define USE_HAL_USART_REGISTER_CALLBACKS 0U +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ + +#define USE_SPI_CRC 1U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32l0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32l0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32l0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32l0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32l0xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32l0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32l0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32l0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32l0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FIREWALL_MODULE_ENABLED + #include "stm32l0xx_hal_firewall.h" +#endif /* HAL_FIREWALL_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32l0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32l0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32l0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32l0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LCD_MODULE_ENABLED + #include "stm32l0xx_hal_lcd.h" +#endif /* HAL_LCD_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32l0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32l0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32l0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32l0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32l0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32l0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32l0xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32l0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32l0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32l0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32l0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32l0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32l0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32l0xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L0xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + -- cgit v1.3.1 From 8a89365bb2b83f9d84e2308e7809ac7d6f94b4a1 Mon Sep 17 00:00:00 2001 From: LynnL4 Date: Tue, 11 Oct 2022 13:50:07 +0800 Subject: Add stm32u5xx offical driver. --- .gitmodules | 6 ++++++ hw/mcu/st/cmsis_device_u5 | 1 + hw/mcu/st/stm32u5xx_hal_driver | 1 + 3 files changed, 8 insertions(+) create mode 160000 hw/mcu/st/cmsis_device_u5 create mode 160000 hw/mcu/st/stm32u5xx_hal_driver (limited to 'hw') diff --git a/.gitmodules b/.gitmodules index 044ac24ec..aafb0f520 100644 --- a/.gitmodules +++ b/.gitmodules @@ -149,3 +149,9 @@ [submodule "hw/mcu/raspberry_pi/Pico-PIO-USB"] path = hw/mcu/raspberry_pi/Pico-PIO-USB url = https://github.com/sekigon-gonnoc/Pico-PIO-USB.git +[submodule "/home/ubuntu/tinyusb/hw/mcu/st/cmsis_device_u5"] + path = /home/ubuntu/tinyusb/hw/mcu/st/cmsis_device_u5 + url = https://github.com/STMicroelectronics/cmsis_device_u5 +[submodule "/home/ubuntu/tinyusb/hw/mcu/st/stm32u5xx_hal_driver"] + path = /home/ubuntu/tinyusb/hw/mcu/st/stm32u5xx_hal_driver + url = https://github.com/STMicroelectronics/stm32u5xx_hal_driver diff --git a/hw/mcu/st/cmsis_device_u5 b/hw/mcu/st/cmsis_device_u5 new file mode 160000 index 000000000..bc00f3c9d --- /dev/null +++ b/hw/mcu/st/cmsis_device_u5 @@ -0,0 +1 @@ +Subproject commit bc00f3c9d8a4e25220f84c26d414902cc6bdf566 diff --git a/hw/mcu/st/stm32u5xx_hal_driver b/hw/mcu/st/stm32u5xx_hal_driver new file mode 160000 index 000000000..2e1d4cdb3 --- /dev/null +++ b/hw/mcu/st/stm32u5xx_hal_driver @@ -0,0 +1 @@ +Subproject commit 2e1d4cdb386e33391cb261dfff4fefa92e4aa35a -- cgit v1.3.1 From 4238467b2d78fcb11ba63026daa525d1c09e17ac Mon Sep 17 00:00:00 2001 From: LynnL4 Date: Thu, 13 Oct 2022 17:37:28 +0800 Subject: Add support for STM32U5 mcu --- hw/bsp/board_mcu.h | 3 + .../boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld | 167 +++++++ hw/bsp/stm32u5/boards/stm32u575eval/board.h | 112 +++++ hw/bsp/stm32u5/boards/stm32u575eval/board.mk | 10 + hw/bsp/stm32u5/family.c | 200 ++++++++ hw/bsp/stm32u5/family.mk | 45 ++ hw/bsp/stm32u5/stm32u5xx_hal_conf.h | 506 +++++++++++++++++++++ src/common/tusb_mcu.h | 5 + src/portable/synopsys/dwc2/dwc2_stm32.h | 6 + src/tusb_option.h | 1 + 10 files changed, 1055 insertions(+) create mode 100644 hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld create mode 100644 hw/bsp/stm32u5/boards/stm32u575eval/board.h create mode 100644 hw/bsp/stm32u5/boards/stm32u575eval/board.mk create mode 100644 hw/bsp/stm32u5/family.c create mode 100644 hw/bsp/stm32u5/family.mk create mode 100644 hw/bsp/stm32u5/stm32u5xx_hal_conf.h (limited to 'hw') diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index 5c309a21d..18f071a22 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -98,6 +98,9 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32WB #include "stm32wbxx.h" +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #include "stm32u5xx.h" + #elif CFG_TUSB_MCU == OPT_MCU_CXD56 // no header needed diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld b/hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld new file mode 100644 index 000000000..03c022bc2 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u575eval/STM32U575AIIXQ_FLASH.ld @@ -0,0 +1,167 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : STM32CubeIDE +** +** Abstract : Linker script for STM32U575xI Device from STM32U5 series +** 2048Kbytes FLASH +** 784Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2022 STMicroelectronics. +** All rights reserved. +** +** This software is licensed under terms that can be found in the LICENSE file +** in the root directory of this software component. +** If no LICENSE file comes with this software, it is provided AS-IS. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 768K + SRAM4 (xrw) : ORIGIN = 0x28000000, LENGTH = 16K + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + KEEP(*(.isr_vector)) /* Startup code */ + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + } >FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } >FLASH + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.h b/hw/bsp/stm32u5/boards/stm32u575eval/board.h new file mode 100644 index 000000000..5c348b812 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.h @@ -0,0 +1,112 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022, Hongtai Liu + * Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif + +// LED GREEN +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_7 +#define LED_STATE_ON 1 + +// // LED +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for STLink VCOM +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF7_USART1 +#define UART_TX_PIN GPIO_PIN_9 +#define UART_RX_PIN GPIO_PIN_10 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ + +static inline void board_clock_init(void) +{ + + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /* Enable Power Clock*/ + __HAL_RCC_PWR_CLK_ENABLE(); + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMBOOST = RCC_PLLMBOOST_DIV1; + RCC_OscInitStruct.PLL.PLLM = 1; + RCC_OscInitStruct.PLL.PLLN = 10; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 2; + RCC_OscInitStruct.PLL.PLLR = 1; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLLVCIRANGE_1; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_CLK48; + PeriphClkInit.IclkClockSelection = RCC_CLK48CLKSOURCE_HSI48; + + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); + + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK3; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB3CLKDivider = RCC_HCLK_DIV1; + + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); +} + + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk new file mode 100644 index 000000000..19cd2a5b0 --- /dev/null +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk @@ -0,0 +1,10 @@ +CFLAGS += \ + -DSTM32U575xx \ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/STM32U575AIIXQ_FLASH.ld + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s + +# For flash-jlink target +JLINK_DEVICE = stm32u575 diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c new file mode 100644 index 000000000..9bc94cfa3 --- /dev/null +++ b/hw/bsp/stm32u5/family.c @@ -0,0 +1,200 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022, Hongtai Liu + * Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32u5xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +UART_HandleTypeDef UartHandle; + +void board_init(void) +{ + + board_clock_init(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + + UART_CLK_EN(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // IOSV bit MUST be set to access GPIO port G[2:15] */ + HAL_PWREx_EnableVddIO2(); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UART_DEV; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + UartHandle.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + UartHandle.Init.ClockPrescaler = UART_PRESCALER_DIV1; + UartHandle.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + + HAL_UART_Init(&UartHandle); + + /* Configure USB FS GPIOs */ + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + +#if OTG_FS_VBUS_SENSE + // Configure VBUS Pin + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#else + // Disable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif // vbus sense + + /* Enable USB power on Pwrctrl CR2 register */ + HAL_PWREx_EnableVddUSB(); + + /* USB_OTG_FS clock enable */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t *buf, int len) +{ + (void)buf; + (void)len; + return 0; +} + +int board_uart_write(void const *buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t *)(uintptr_t)buf, len, 0xffff); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler(void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ +} diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk new file mode 100644 index 000000000..1cfb81e43 --- /dev/null +++ b/hw/bsp/stm32u5/family.mk @@ -0,0 +1,45 @@ +ST_FAMILY = u5 +DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m33 \ + -mfloat-abi=hard \ + -mfpu=fpv5-sp-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32U5 + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=undef -Wno-error=unused-parameter + +#src/portable/st/synopsys/dcd_synopsys.c +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/$(BOARD_PATH) + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM33_NTZ/non_secure + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h new file mode 100644 index 000000000..15dffa813 --- /dev/null +++ b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h @@ -0,0 +1,506 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32u5xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32U5xx_HAL_CONF_H +#define STM32U5xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ + +#define HAL_MODULE_ENABLED + +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_MDF_MODULE_ENABLED */ +/*#define HAL_COMP_MODULE_ENABLED */ +/*#define HAL_CORDIC_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DAC_MODULE_ENABLED */ +/*#define HAL_DMA2D_MODULE_ENABLED */ +/*#define HAL_DSI_MODULE_ENABLED */ +/*#define HAL_FDCAN_MODULE_ENABLED */ +/*#define HAL_FMAC_MODULE_ENABLED */ +/*#define HAL_GFXMMU_MODULE_ENABLED */ +/*#define HAL_GPU2D_MODULE_ENABLED */ +/*#define HAL_GTZC_MODULE_ENABLED */ +/*#define HAL_HASH_MODULE_ENABLED */ +/*#define HAL_HRTIM_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_I2C_MODULE_ENABLED */ +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_LTDC_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +/*#define HAL_OPAMP_MODULE_ENABLED */ +#define HAL_OSPI_MODULE_ENABLED +/*#define HAL_OTFDEC_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_QSPI_MODULE_ENABLED */ +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_SD_MODULE_ENABLED */ +/*#define HAL_MMC_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED */ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SRAM_MODULE_ENABLED */ +/*#define HAL_TIM_MODULE_ENABLED */ +/*#define HAL_TSC_MODULE_ENABLED */ +/*#define HAL_RAMCFG_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/*#define HAL_USART_MODULE_ENABLED */ +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_DCMI_MODULE_ENABLED */ +/*#define HAL_PSSI_MODULE_ENABLED */ +#define HAL_ICACHE_MODULE_ENABLED +/*#define HAL_DCACHE_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/*#define HAL_HCD_MODULE_ENABLED */ +/*#define HAL_XSPI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE 16000000UL /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) + #define MSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE 16000000UL /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ +#if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. + The real value my vary depending on manufacturing process variations.*/ +#endif /* HSI48_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE 32768UL /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for SAI1 peripheral + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * frequency. + */ +#if !defined (EXTERNAL_SAI1_CLOCK_VALUE) + #define EXTERNAL_SAI1_CLOCK_VALUE 48000UL /*!< Value of the SAI1 External clock source in Hz*/ +#endif /* EXTERNAL_SAI1_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ + +#define VDD_VALUE 3300UL /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U /*!< Enable prefetch */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ + +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Register callback feature configuration ############### */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/unregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32u5xx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ +#define USE_HAL_GPU2D_REGISTER_CALLBACKS 0U /* GPU2D register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDF_REGISTER_CALLBACKS 0U /* MDF register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_PKA_REGISTER_CALLBACKS 0U /* PKA register callback disabled */ +#define USE_HAL_RAMCFG_REGISTER_CALLBACKS 0U /* RAMCFG register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ +#define USE_SPI_CRC 0U + +/* ################## SDMMC peripheral configuration ######################### */ + +#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32u5xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32u5xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_ICACHE_MODULE_ENABLED + #include "stm32u5xx_hal_icache.h" +#endif /* HAL_ICACHE_MODULE_ENABLED */ + +#ifdef HAL_DCACHE_MODULE_ENABLED + #include "stm32u5xx_hal_dcache.h" +#endif /* HAL_DCACHE_MODULE_ENABLED */ + +#ifdef HAL_GTZC_MODULE_ENABLED + #include "stm32u5xx_hal_gtzc.h" +#endif /* HAL_GTZC_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32u5xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32u5xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED +#include "stm32u5xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32u5xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED + #include "stm32u5xx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32u5xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32u5xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32u5xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32u5xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32u5xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32u5xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32u5xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32u5xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32u5xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32u5xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32u5xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32u5xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32u5xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32u5xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32u5xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32u5xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32u5xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32u5xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32u5xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32u5xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32u5xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32u5xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32u5xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32u5xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32u5xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32u5xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32u5xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32u5xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32u5xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32u5xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32u5xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32u5xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32u5xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED + #include "stm32u5xx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32u5xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32u5xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32u5xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_FMAC_MODULE_ENABLED + #include "stm32u5xx_hal_fmac.h" +#endif /* HAL_FMAC_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32u5xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_GPU2D_MODULE_ENABLED + #include "stm32u5xx_hal_gpu2d.h" +#endif /* HAL_GPU2D_MODULE_ENABLED */ + +#ifdef HAL_OTFDEC_MODULE_ENABLED + #include "stm32u5xx_hal_otfdec.h" +#endif /* HAL_OTFDEC_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32u5xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_RAMCFG_MODULE_ENABLED + #include "stm32u5xx_hal_ramcfg.h" +#endif /* HAL_RAMCFG_MODULE_ENABLED */ + +#ifdef HAL_MDF_MODULE_ENABLED + #include "stm32u5xx_hal_mdf.h" +#endif /* HAL_MDF_MODULE_ENABLED */ + +#ifdef HAL_XSPI_MODULE_ENABLED + #include "stm32u5xx_hal_xspi.h" +#endif /* HAL_XSPI_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32U5xx_HAL_CONF_H */ + diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 514ffcd4d..86c68baf8 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -189,6 +189,11 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32WB) #define TUP_DCD_ENDPOINT_MAX 8 +#elif TU_CHECK_MCU(OPT_MCU_STM32U5) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + #define TUP_DCD_ENDPOINT_MAX 6 + //------------- Sony -------------// #elif TU_CHECK_MCU(OPT_MCU_CXD56) #define TUP_DCD_ENDPOINT_MAX 7 diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 337f611d8..ea786362e 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -82,6 +82,12 @@ #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #include "stm32u5xx.h" + #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE + #define EP_MAX_FS 6 + #define EP_FIFO_SIZE_FS 1280 + #else #error "Unsupported MCUs" #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 4c2dd0258..f95ae6273 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -84,6 +84,7 @@ typedef int make_iso_compilers_happy; #define OPT_MCU_STM32G0 310 ///< ST G0 #define OPT_MCU_STM32G4 311 ///< ST G4 #define OPT_MCU_STM32WB 312 ///< ST WB +#define OPT_MCU_STM32U5 313 ///< ST U5 // Sony #define OPT_MCU_CXD56 400 ///< SONY CXD56 -- cgit v1.3.1 From e3b7ed9ae966be1cb41165343ef30c6523ed5771 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Oct 2022 18:43:21 +0700 Subject: use dummy for all ZLP for ip3511, fix lpc55 build with DEBUG=1 --- hw/bsp/lpc55/family.mk | 1 + src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 10 ++++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'hw') diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk index 1af1d076e..9d6702b94 100644 --- a/hw/bsp/lpc55/family.mk +++ b/hw/bsp/lpc55/family.mk @@ -43,6 +43,7 @@ SRC_C += \ $(MCU_DIR)/drivers/fsl_power.c \ $(MCU_DIR)/drivers/fsl_reset.c \ $(SDK_DIR)/drivers/lpc_gpio/fsl_gpio.c \ + $(SDK_DIR)/drivers/common/fsl_common_arm.c \ $(SDK_DIR)/drivers/flexcomm/fsl_flexcomm.c \ $(SDK_DIR)/drivers/flexcomm/fsl_usart.c \ lib/sct_neopixel/sct_neopixel.c diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 7825d287f..9b490c48c 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -178,7 +178,9 @@ typedef struct // For example: LPC55s69 port1 Highspeed must be USB_RAM (0x40100000) // Use CFG_TUSB_MEM_SECTION to place it accordingly. CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(256) static volatile uint8_t dummy[8] = { 0 }; // a fix for EP0 OUT ZLPs overwriting the buffer + +// Dummy buffer to fix ZLPs overwriting the buffer (probably an USB/DMA controller bug) +CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; //--------------------------------------------------------------------+ // Multiple Controllers @@ -405,10 +407,14 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to tu_memclr(&_dcd.dma[ep_id], sizeof(xfer_dma_t)); _dcd.dma[ep_id].total_bytes = total_bytes; - if (!buffer && !ep_id) // for EP0 OUT ZLPs to prevent overwrites to buffer + if (!buffer) { + // Although having no data, ZLPs can cause buffer overwritten to zeroes. + // Probably due to USB/DMA controller side effect/bug. + // Assigned buffer offset to (valid) dummy to prevent overwriting to DATABUFSTART buffer = (uint8_t*)(uint32_t)dummy; } + prepare_ep_xfer(rhport, ep_id, get_buf_offset(buffer), total_bytes); return true; -- cgit v1.3.1