From f2ed60e9fc562bc5fd2016aea61695b708c2bd53 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 21:49:33 +0100 Subject: Update audio class with dcache support. Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 212 +++++++++++++++++++++++++---------------- src/class/audio/audio_device.h | 3 + 2 files changed, 132 insertions(+), 83 deletions(-) (limited to 'src/class/audio') diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index cd4183cc3..2add741a8 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -81,6 +81,7 @@ // Only STM32 and dcd_transdimension use non-linear buffer for now // dwc2 except esp32sx (since it may use dcd_esp32sx) +// Ring buffer is imcompatible with dcache, since neither address nor size is aligned to cache line #if (defined(TUP_USBIP_DWC2) && !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)) || \ defined(TUP_USBIP_FSDEV) || \ CFG_TUSB_MCU == OPT_MCU_RX63X || \ @@ -90,7 +91,7 @@ CFG_TUSB_MCU == OPT_MCU_LPC43XX || \ CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX || \ CFG_TUSB_MCU == OPT_MCU_MSP432E4 - #if TUD_AUDIO_PREFER_RING_BUFFER + #if TUD_AUDIO_PREFER_RING_BUFFER && !CFG_TUD_MEM_DCACHE_ENABLE #define USE_LINEAR_BUFFER 0 #else #define USE_LINEAR_BUFFER 1 @@ -106,109 +107,115 @@ #error Maximum number of audio functions restricted to three! #endif -// Put sw_buf in USB section only if necessary +// Put swap buffer in USB section only if necessary #if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING -#define IN_SW_BUF_MEM_SECTION +#define IN_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) #else -#define IN_SW_BUF_MEM_SECTION CFG_TUD_MEM_SECTION +#define IN_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN #endif #if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING -#define OUT_SW_BUF_MEM_SECTION +#define OUT_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) #else -#define OUT_SW_BUF_MEM_SECTION CFG_TUD_MEM_SECTION +#define OUT_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN #endif // EP IN software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +tu_static IN_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - tu_static IN_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t ep_in_ff_mutex_wr_1; // No need for read mutex as only USB driver reads from FIFO - #endif - #endif // CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ); + #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - tu_static IN_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t ep_in_ff_mutex_wr_2; // No need for read mutex as only USB driver reads from FIFO - #endif - #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ); + #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 - tu_static IN_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t ep_in_ff_mutex_wr_3; // No need for read mutex as only USB driver reads from FIFO + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ); + #endif +} ep_in_sw_buf; + + #if CFG_FIFO_MUTEX + #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 + tu_static osal_mutex_def_t ep_in_ff_mutex_wr_1; + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 + tu_static osal_mutex_def_t ep_in_ff_mutex_wr_2; + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 + tu_static osal_mutex_def_t ep_in_ff_mutex_wr_3; #endif - #endif // CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 + #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING // Linear buffer TX in case: // - target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) +tu_static CFG_TUD_MEM_SECTION struct { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 - tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX); #endif - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 - tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX]; + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX); #endif - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 - tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX]; + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX); #endif +} lin_buf_in; #endif // CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // EP OUT software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +tu_static OUT_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - tu_static OUT_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t ep_out_ff_mutex_rd_1; // No need for write mutex as only USB driver writes into FIFO - #endif - #endif // CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ); + #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - tu_static OUT_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t ep_out_ff_mutex_rd_2; // No need for write mutex as only USB driver writes into FIFO - #endif - #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ); + #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - tu_static OUT_SW_BUF_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t ep_out_ff_mutex_rd_3; // No need for write mutex as only USB driver writes into FIFO + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ); + #endif +} ep_out_sw_buf; + + #if CFG_FIFO_MUTEX + #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 + tu_static osal_mutex_def_t ep_out_ff_mutex_wr_1; + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 + tu_static osal_mutex_def_t ep_out_ff_mutex_wr_2; #endif - #endif // CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 + tu_static osal_mutex_def_t ep_out_ff_mutex_wr_3; + #endif + #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING // Linear buffer RX in case: // - target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) +tu_static CFG_TUD_MEM_SECTION struct { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 - tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX]; + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX); #endif - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 - tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX]; + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX); #endif - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 - tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX]; + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX); #endif +} lin_buf_out; #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // Control buffers -tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; +tu_static uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; #if CFG_TUD_AUDIO > 1 -tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; +tu_static uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; #endif #if CFG_TUD_AUDIO > 2 -tu_static CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; +tu_static uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; #endif // Active alternate setting of interfaces @@ -225,7 +232,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; // Software encoding/decoding support FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - tu_static CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; + tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t tx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -233,7 +240,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - tu_static CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; + tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t tx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -241,7 +248,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - tu_static CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; + tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t tx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -251,7 +258,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - tu_static CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; + tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t rx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -259,7 +266,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - tu_static CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; + tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t rx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -267,7 +274,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - tu_static CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; + tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t rx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -275,6 +282,28 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #endif +// Aligned buffer for feedback EP +#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +tu_static CFG_TUD_MEM_SECTION struct { + #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 + TUD_EPBUF_TYPE_DEF(uint32_t, buf_1); + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 + TUD_EPBUF_TYPE_DEF(uint32_t, buf_2); + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 + TUD_EPBUF_TYPE_DEF(uint32_t, buf_3); + #endif +} fb_ep_buf; +#endif + +// Aligned buffer for interrupt EP +#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP +tu_static CFG_TUD_MEM_SECTION struct { + TUD_EPBUF_DEF(buf, CFG_TUD_AUDIO_INTERRUPT_EP_SZ); +} int_ep_buf[CFG_TUD_AUDIO]; +#endif + typedef struct { uint8_t rhport; @@ -307,7 +336,6 @@ typedef struct #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP struct { - CFG_TUSB_MEM_ALIGN uint32_t send_buf; uint32_t value; // Feedback value for asynchronous mode (in 16.16 format). uint32_t min_value; // min value according to UAC2 FMT-2.0 section 2.3.1.1. uint32_t max_value; // max value according to UAC2 FMT-2.0 section 2.3.1.1. @@ -385,11 +413,6 @@ typedef struct tu_fifo_t ep_in_ff; #endif - // Audio control interrupt buffer - no FIFO - 6 Bytes according to UAC 2 specification (p. 74) -#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP - CFG_TUSB_MEM_ALIGN uint8_t ep_int_buf[6]; -#endif - // Support FIFOs for software encoding and decoding #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING tu_fifo_t * rx_supp_ff; @@ -420,6 +443,9 @@ typedef struct #define USE_LINEAR_BUFFER_TX 1 #endif +#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + uint32_t * fb_buf; +#endif } audiod_function_t; #ifndef USE_LINEAR_BUFFER_TX @@ -964,10 +990,10 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t * data) TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int)); // Check length - if (tu_memcpy_s(_audiod_fct[func_id].ep_int_buf, sizeof(_audiod_fct[func_id].ep_int_buf), data, sizeof(audio_interrupt_data_t)) == 0) + if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio_interrupt_data_t)) == 0) { // Schedule transmit - TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, _audiod_fct[func_id].ep_int_buf, sizeof(_audiod_fct[func_id].ep_int_buf)), 0); + TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf)), 0); } else { // Release endpoint since we don't make any transfer @@ -1221,7 +1247,7 @@ static inline bool audiod_fb_send(audiod_function_t *audio) // Format the feedback value if (apply_correction) { - uint8_t * fb = (uint8_t *) &audio->feedback.send_buf; + uint8_t * fb = (uint8_t *) audio->fb_buf; // For FS format is 10.14 *(fb++) = (audio->feedback.value >> 2) & 0xFF; @@ -1230,7 +1256,7 @@ static inline bool audiod_fb_send(audiod_function_t *audio) *fb = 0; } else { - audio->feedback.send_buf = audio->feedback.value; + *audio->fb_buf = audio->feedback.value; } // About feedback format on FS @@ -1246,7 +1272,7 @@ static inline bool audiod_fb_send(audiod_function_t *audio) // 10.14 3 3 Linux, OSX // // We send 3 bytes since sending packet larger than wMaxPacketSize is pretty ugly - return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) &audio->feedback.send_buf, apply_correction ? 3 : 4); + return usbd_edpt_xfer(audio->rhport, audio->ep_fb, (uint8_t *) audio->fb_buf, apply_correction ? 3 : 4); } #endif @@ -1309,7 +1335,7 @@ void audiod_init(void) { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 case 0: - tu_fifo_config(&audio->ep_in_ff, audio_ep_in_sw_buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ, 1, true); #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_in_ff, osal_mutex_create(&ep_in_ff_mutex_wr_1), NULL); #endif @@ -1317,7 +1343,7 @@ void audiod_init(void) #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 case 1: - tu_fifo_config(&audio->ep_in_ff, audio_ep_in_sw_buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ, 1, true); #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_in_ff, osal_mutex_create(&ep_in_ff_mutex_wr_2), NULL); #endif @@ -1325,7 +1351,7 @@ void audiod_init(void) #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 case 2: - tu_fifo_config(&audio->ep_in_ff, audio_ep_in_sw_buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ, 1, true); #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_in_ff, osal_mutex_create(&ep_in_ff_mutex_wr_3), NULL); #endif @@ -1340,17 +1366,17 @@ void audiod_init(void) { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 case 0: - audio->lin_buf_in = lin_buf_in_1; + audio->lin_buf_in = lin_buf_in.buf_1; break; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 case 1: - audio->lin_buf_in = lin_buf_in_2; + audio->lin_buf_in = lin_buf_in.buf_2; break; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 case 2: - audio->lin_buf_in = lin_buf_in_3; + audio->lin_buf_in = lin_buf_in.buf_3; break; #endif } @@ -1363,7 +1389,7 @@ void audiod_init(void) { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 case 0: - tu_fifo_config(&audio->ep_out_ff, audio_ep_out_sw_buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ, 1, true); #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_out_ff, NULL, osal_mutex_create(&ep_out_ff_mutex_rd_1)); #endif @@ -1371,7 +1397,7 @@ void audiod_init(void) #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 case 1: - tu_fifo_config(&audio->ep_out_ff, audio_ep_out_sw_buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ, 1, true); #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_out_ff, NULL, osal_mutex_create(&ep_out_ff_mutex_rd_2)); #endif @@ -1379,7 +1405,7 @@ void audiod_init(void) #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 case 2: - tu_fifo_config(&audio->ep_out_ff, audio_ep_out_sw_buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ, 1, true); + tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ, 1, true); #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_out_ff, NULL, osal_mutex_create(&ep_out_ff_mutex_rd_3)); #endif @@ -1394,21 +1420,42 @@ void audiod_init(void) { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 case 0: - audio->lin_buf_out = lin_buf_out_1; + audio->lin_buf_out = lin_buf_out.buf_1; break; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 case 1: - audio->lin_buf_out = lin_buf_out_2; + audio->lin_buf_out = lin_buf_out.buf_2; break; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 case 2: - audio->lin_buf_out = lin_buf_out_3; + audio->lin_buf_out = lin_buf_out.buf_3; break; #endif } -#endif // USE_LINEAR_BUFFER_TX +#endif // USE_LINEAR_BUFFER_RX + +#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + switch (i) + { +#if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 + case 0: + audio->fb_buf = &fb_ep_buf.buf_1; + break; +#endif +#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 + case 1: + audio->fb_buf = &fb_ep_buf.buf_2; + break; +#endif +#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 + case 2: + audio->fb_buf = &fb_ep_buf.buf_3; + break; +#endif + } +#endif // CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // Initialize TX support FIFOs if required #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING @@ -1810,8 +1857,7 @@ static bool audiod_get_interface(uint8_t rhport, tusb_control_request_t const * uint8_t const *dummy; TU_VERIFY(audiod_get_AS_interface_index_global(itf, &func_id, &idxItf, &dummy)); - _audiod_fct[func_id].ctrl_buf[0] = _audiod_fct[func_id].alt_setting[idxItf]; - TU_VERIFY(tud_control_xfer(rhport, p_request, _audiod_fct[func_id].ctrl_buf, 1)); + TU_VERIFY(tud_control_xfer(rhport, p_request, &_audiod_fct[func_id].alt_setting[idxItf], 1)); TU_LOG2(" Get itf: %u - current alt: %u\r\n", itf, _audiod_fct[func_id].alt_setting[idxItf]); diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index ae253f49d..0a7bff212 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -203,6 +203,9 @@ #define CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP 0 // Feedback - 0 or 1 #endif +// Audio control interrupt EP - 6 Bytes according to UAC 2 specification (p. 74) +#define CFG_TUD_AUDIO_INTERRUPT_EP_SZ 6 + // Use software encoding/decoding // The software coding feature of the driver is not mandatory. It is useful if, for instance, you have two I2S streams which need to be interleaved -- cgit v1.3.1 From 0bca377d5210833ac259db6ed9d7d96c724f3e6e Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 21:57:47 +0100 Subject: Fix typo. Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 8 ++++---- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'src/class/audio') diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 2add741a8..425da4483 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -81,7 +81,7 @@ // Only STM32 and dcd_transdimension use non-linear buffer for now // dwc2 except esp32sx (since it may use dcd_esp32sx) -// Ring buffer is imcompatible with dcache, since neither address nor size is aligned to cache line +// Ring buffer is incompatible with dcache, since neither address nor size is aligned to cache line #if (defined(TUP_USBIP_DWC2) && !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)) || \ defined(TUP_USBIP_FSDEV) || \ CFG_TUSB_MCU == OPT_MCU_RX63X || \ @@ -179,13 +179,13 @@ tu_static OUT_SW_BUF_MEM_ATTR struct { #if CFG_FIFO_MUTEX #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_wr_1; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_1; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_wr_2; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_2; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_wr_3; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_3; #endif #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index bacc1b99d..331fbfe80 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -467,7 +467,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t #if !CFG_TUD_MEM_DCACHE_ENABLE // fifo has to be aligned to 4k boundary -// It's imcompatible with dcache enabled transfer, since neither address nor size is aligned to cache line +// It's incompatible with dcache enabled transfer, since neither address nor size is aligned to cache line bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); -- cgit v1.3.1 From df91c12ab29a117edee504b876dfaf78a5615da9 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 23:31:28 +0100 Subject: Reformat audio class. Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 1571 +++++++++++++++++----------------------- 1 file changed, 670 insertions(+), 901 deletions(-) (limited to 'src/class/audio') diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 425da4483..8a130b7e2 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -83,68 +83,68 @@ // dwc2 except esp32sx (since it may use dcd_esp32sx) // Ring buffer is incompatible with dcache, since neither address nor size is aligned to cache line #if (defined(TUP_USBIP_DWC2) && !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)) || \ - defined(TUP_USBIP_FSDEV) || \ - CFG_TUSB_MCU == OPT_MCU_RX63X || \ - CFG_TUSB_MCU == OPT_MCU_RX65X || \ - CFG_TUSB_MCU == OPT_MCU_RX72N || \ - CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC43XX || \ - CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX || \ + defined(TUP_USBIP_FSDEV) || \ + CFG_TUSB_MCU == OPT_MCU_RX63X || \ + CFG_TUSB_MCU == OPT_MCU_RX65X || \ + CFG_TUSB_MCU == OPT_MCU_RX72N || \ + CFG_TUSB_MCU == OPT_MCU_LPC18XX || \ + CFG_TUSB_MCU == OPT_MCU_LPC43XX || \ + CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX || \ CFG_TUSB_MCU == OPT_MCU_MSP432E4 #if TUD_AUDIO_PREFER_RING_BUFFER && !CFG_TUD_MEM_DCACHE_ENABLE - #define USE_LINEAR_BUFFER 0 + #define USE_LINEAR_BUFFER 0 #else - #define USE_LINEAR_BUFFER 1 + #define USE_LINEAR_BUFFER 1 #endif #else - #define USE_LINEAR_BUFFER 1 + #define USE_LINEAR_BUFFER 1 #endif // Declaration of buffers // Check for maximum supported numbers #if CFG_TUD_AUDIO > 3 -#error Maximum number of audio functions restricted to three! + #error Maximum number of audio functions restricted to three! #endif // Put swap buffer in USB section only if necessary #if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING -#define IN_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) + #define IN_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) #else -#define IN_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN + #define IN_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN #endif #if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING -#define OUT_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) + #define OUT_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) #else -#define OUT_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN + #define OUT_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN #endif // EP IN software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING tu_static IN_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ); + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ); #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ); + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ); #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 - TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ); + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ); #endif } ep_in_sw_buf; #if CFG_FIFO_MUTEX #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_in_ff_mutex_wr_1; + tu_static osal_mutex_def_t ep_in_ff_mutex_wr_1; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_in_ff_mutex_wr_2; + tu_static osal_mutex_def_t ep_in_ff_mutex_wr_2; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_in_ff_mutex_wr_3; + tu_static osal_mutex_def_t ep_in_ff_mutex_wr_3; #endif #endif -#endif // CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING // Linear buffer TX in case: // - target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR @@ -152,43 +152,43 @@ tu_static IN_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) tu_static CFG_TUD_MEM_SECTION struct { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 - TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX); + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX); #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 - TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX); + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX); #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 - TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX); + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX); #endif } lin_buf_in; -#endif // CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // EP OUT software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING tu_static OUT_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ); + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ); #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ); + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ); #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ); + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ); #endif } ep_out_sw_buf; #if CFG_FIFO_MUTEX #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_rd_1; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_1; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_rd_2; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_2; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_rd_3; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_3; #endif #endif -#endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING // Linear buffer RX in case: // - target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR @@ -196,16 +196,16 @@ tu_static OUT_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) tu_static CFG_TUD_MEM_SECTION struct { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 - TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX); + TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX); #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 - TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX); + TUD_EPBUF_DEF(buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX); #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 - TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX); + TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX); #endif } lin_buf_out; -#endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // Control buffers tu_static uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; @@ -235,7 +235,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t tx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO + tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO];// No need for read mutex as only USB driver reads from FIFO #endif #endif @@ -243,7 +243,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t tx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO + tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO];// No need for read mutex as only USB driver reads from FIFO #endif #endif @@ -251,7 +251,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t tx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO + tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO];// No need for read mutex as only USB driver reads from FIFO #endif #endif #endif @@ -261,7 +261,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t rx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO + tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO];// No need for write mutex as only USB driver writes into FIFO #endif #endif @@ -269,7 +269,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t rx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO + tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO];// No need for write mutex as only USB driver writes into FIFO #endif #endif @@ -277,7 +277,7 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; tu_static tu_fifo_t rx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO + tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO];// No need for write mutex as only USB driver writes into FIFO #endif #endif #endif @@ -286,13 +286,13 @@ tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP tu_static CFG_TUD_MEM_SECTION struct { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 - TUD_EPBUF_TYPE_DEF(uint32_t, buf_1); + TUD_EPBUF_TYPE_DEF(uint32_t, buf_1); #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 - TUD_EPBUF_TYPE_DEF(uint32_t, buf_2); + TUD_EPBUF_TYPE_DEF(uint32_t, buf_2); #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 - TUD_EPBUF_TYPE_DEF(uint32_t, buf_3); + TUD_EPBUF_TYPE_DEF(uint32_t, buf_3); #endif } fb_ep_buf; #endif @@ -300,80 +300,80 @@ tu_static CFG_TUD_MEM_SECTION struct { // Aligned buffer for interrupt EP #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP tu_static CFG_TUD_MEM_SECTION struct { - TUD_EPBUF_DEF(buf, CFG_TUD_AUDIO_INTERRUPT_EP_SZ); + TUD_EPBUF_DEF(buf, CFG_TUD_AUDIO_INTERRUPT_EP_SZ); } int_ep_buf[CFG_TUD_AUDIO]; #endif typedef struct { uint8_t rhport; - uint8_t const * p_desc; // Pointer pointing to Standard AC Interface Descriptor(4.7.1) - Audio Control descriptor defining audio function + uint8_t const *p_desc;// Pointer pointing to Standard AC Interface Descriptor(4.7.1) - Audio Control descriptor defining audio function #if CFG_TUD_AUDIO_ENABLE_EP_IN - uint8_t ep_in; // TX audio data EP. - uint16_t ep_in_sz; // Current size of TX EP - uint8_t ep_in_as_intf_num; // Corresponding Standard AS Interface Descriptor (4.9.1) belonging to output terminal to which this EP belongs - 0 is invalid (this fits to UAC2 specification since AS interfaces can not have interface number equal to zero) + uint8_t ep_in; // TX audio data EP. + uint16_t ep_in_sz; // Current size of TX EP + uint8_t ep_in_as_intf_num;// Corresponding Standard AS Interface Descriptor (4.9.1) belonging to output terminal to which this EP belongs - 0 is invalid (this fits to UAC2 specification since AS interfaces can not have interface number equal to zero) #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT - uint8_t ep_out; // Incoming (into uC) audio data EP. - uint16_t ep_out_sz; // Current size of RX EP - uint8_t ep_out_as_intf_num; // Corresponding Standard AS Interface Descriptor (4.9.1) belonging to input terminal to which this EP belongs - 0 is invalid (this fits to UAC2 specification since AS interfaces can not have interface number equal to zero) + uint8_t ep_out; // Incoming (into uC) audio data EP. + uint16_t ep_out_sz; // Current size of RX EP + uint8_t ep_out_as_intf_num;// Corresponding Standard AS Interface Descriptor (4.9.1) belonging to input terminal to which this EP belongs - 0 is invalid (this fits to UAC2 specification since AS interfaces can not have interface number equal to zero) -#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - uint8_t ep_fb; // Feedback EP. -#endif + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + uint8_t ep_fb;// Feedback EP. + #endif #endif #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP - uint8_t ep_int; // Audio control interrupt EP. + uint8_t ep_int;// Audio control interrupt EP. #endif - bool mounted; // Device opened + bool mounted;// Device opened - uint16_t desc_length; // Length of audio function descriptor + uint16_t desc_length;// Length of audio function descriptor #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP struct { - uint32_t value; // Feedback value for asynchronous mode (in 16.16 format). - uint32_t min_value; // min value according to UAC2 FMT-2.0 section 2.3.1.1. - uint32_t max_value; // max value according to UAC2 FMT-2.0 section 2.3.1.1. + uint32_t value; // Feedback value for asynchronous mode (in 16.16 format). + uint32_t min_value;// min value according to UAC2 FMT-2.0 section 2.3.1.1. + uint32_t max_value;// max value according to UAC2 FMT-2.0 section 2.3.1.1. - uint8_t frame_shift; // bInterval-1 in unit of frame (FS), micro-frame (HS) + uint8_t frame_shift;// bInterval-1 in unit of frame (FS), micro-frame (HS) uint8_t compute_method; bool format_correction; union { - uint8_t power_of_2; // pre-computed power of 2 shift - float float_const; // pre-computed float constant + uint8_t power_of_2;// pre-computed power of 2 shift + float float_const; // pre-computed float constant struct { uint32_t sample_freq; uint32_t mclk_freq; - }fixed; + } fixed; struct { - uint32_t nom_value; // In 16.16 format - uint32_t fifo_lvl_avg; // In 16.16 format - uint16_t fifo_lvl_thr; // fifo level threshold - uint16_t rate_const[2]; // pre-computed feedback/fifo_depth rate - }fifo_count; - }compute; + uint32_t nom_value; // In 16.16 format + uint32_t fifo_lvl_avg; // In 16.16 format + uint16_t fifo_lvl_thr; // fifo level threshold + uint16_t rate_const[2];// pre-computed feedback/fifo_depth rate + } fifo_count; + } compute; } feedback; -#endif // CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +#endif// CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Decoding parameters - parameters are set when alternate AS interface is set by host - // Coding is currently only supported for EP. Software coding corresponding to AS interfaces without EPs are not supported currently. +// Decoding parameters - parameters are set when alternate AS interface is set by host +// Coding is currently only supported for EP. Software coding corresponding to AS interfaces without EPs are not supported currently. #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING audio_format_type_t format_type_rx; uint8_t n_channels_rx; -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING + #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING audio_data_format_type_I_t format_type_I_rx; uint8_t n_bytes_per_sample_rx; uint8_t n_ff_used_rx; -#endif + #endif #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL @@ -383,28 +383,28 @@ typedef struct uint8_t interval_tx; #endif - // Encoding parameters - parameters are set when alternate AS interface is set by host +// Encoding parameters - parameters are set when alternate AS interface is set by host #if CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL) audio_format_type_t format_type_tx; uint8_t n_channels_tx; uint8_t n_bytes_per_sample_tx; -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING + #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING audio_data_format_type_I_t format_type_I_tx; uint8_t n_ff_used_tx; -#endif + #endif #endif /*------------- From this point, data is not cleared by bus reset -------------*/ // Buffer for control requests - uint8_t * ctrl_buf; + uint8_t *ctrl_buf; uint8_t ctrl_buf_sz; // Current active alternate settings - uint8_t * alt_setting; // We need to save the current alternate setting this way, because it is possible that there are AS interfaces which do not have an EP! + uint8_t *alt_setting;// We need to save the current alternate setting this way, because it is possible that there are AS interfaces which do not have an EP! - // EP Transfer buffers and FIFOs +// EP Transfer buffers and FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING tu_fifo_t ep_out_ff; #endif @@ -413,50 +413,50 @@ typedef struct tu_fifo_t ep_in_ff; #endif - // Support FIFOs for software encoding and decoding +// Support FIFOs for software encoding and decoding #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - tu_fifo_t * rx_supp_ff; + tu_fifo_t *rx_supp_ff; uint8_t n_rx_supp_ff; uint16_t rx_supp_ff_sz_max; -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING + #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING uint8_t n_channels_per_ff_rx; -#endif + #endif #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - tu_fifo_t * tx_supp_ff; + tu_fifo_t *tx_supp_ff; uint8_t n_tx_supp_ff; uint16_t tx_supp_ff_sz_max; -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING + #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING uint8_t n_channels_per_ff_tx; -#endif + #endif #endif - // Linear buffer in case target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR the support FIFOs are used +// Linear buffer in case target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR the support FIFOs are used #if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) - uint8_t * lin_buf_out; -#define USE_LINEAR_BUFFER_RX 1 + uint8_t *lin_buf_out; + #define USE_LINEAR_BUFFER_RX 1 #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) - uint8_t * lin_buf_in; -#define USE_LINEAR_BUFFER_TX 1 + uint8_t *lin_buf_in; + #define USE_LINEAR_BUFFER_TX 1 #endif #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - uint32_t * fb_buf; + uint32_t *fb_buf; #endif } audiod_function_t; #ifndef USE_LINEAR_BUFFER_TX -#define USE_LINEAR_BUFFER_TX 0 + #define USE_LINEAR_BUFFER_TX 0 #endif #ifndef USE_LINEAR_BUFFER_RX -#define USE_LINEAR_BUFFER_RX 0 + #define USE_LINEAR_BUFFER_RX 0 #endif -#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ctrl_buf) +#define ITF_MEM_RESET_SIZE offsetof(audiod_function_t, ctrl_buf) //--------------------------------------------------------------------+ // WEAK FUNCTION STUBS @@ -506,7 +506,7 @@ TU_ATTR_WEAK void tud_audio_fb_done_cb(uint8_t func_id) { (void) func_id; } -TU_ATTR_WEAK void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedback_params_t* feedback_param) { +TU_ATTR_WEAK void tud_audio_feedback_params_cb(uint8_t func_id, uint8_t alt_itf, audio_feedback_params_t *feedback_param) { (void) func_id; (void) alt_itf; feedback_param->method = AUDIO_FEEDBACK_METHOD_DISABLED; @@ -531,68 +531,68 @@ TU_ATTR_WEAK void tud_audio_int_done_cb(uint8_t rhport) { #endif // Invoked when audio set interface request received -TU_ATTR_WEAK bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) { +TU_ATTR_WEAK bool tud_audio_set_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; (void) p_request; return true; } // Invoked when audio set interface request received which closes an EP -TU_ATTR_WEAK bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const * p_request) { +TU_ATTR_WEAK bool tud_audio_set_itf_close_EP_cb(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; (void) p_request; return true; } // Invoked when audio class specific set request received for an EP -TU_ATTR_WEAK bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) { +TU_ATTR_WEAK bool tud_audio_set_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { (void) rhport; (void) p_request; (void) pBuff; TU_LOG2(" No EP set request callback available!\r\n"); - return false; // In case no callback function is present or request can not be conducted we stall it + return false;// In case no callback function is present or request can not be conducted we stall it } // Invoked when audio class specific set request received for an interface -TU_ATTR_WEAK bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) { +TU_ATTR_WEAK bool tud_audio_set_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { (void) rhport; (void) p_request; (void) pBuff; TU_LOG2(" No interface set request callback available!\r\n"); - return false; // In case no callback function is present or request can not be conducted we stall it + return false;// In case no callback function is present or request can not be conducted we stall it } // Invoked when audio class specific set request received for an entity -TU_ATTR_WEAK bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request, uint8_t *pBuff) { +TU_ATTR_WEAK bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request, uint8_t *pBuff) { (void) rhport; (void) p_request; (void) pBuff; TU_LOG2(" No entity set request callback available!\r\n"); - return false; // In case no callback function is present or request can not be conducted we stall it + return false;// In case no callback function is present or request can not be conducted we stall it } // Invoked when audio class specific get request received for an EP -TU_ATTR_WEAK bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const * p_request) { +TU_ATTR_WEAK bool tud_audio_get_req_ep_cb(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; (void) p_request; TU_LOG2(" No EP get request callback available!\r\n"); - return false; // Stall + return false;// Stall } // Invoked when audio class specific get request received for an interface -TU_ATTR_WEAK bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const * p_request) { +TU_ATTR_WEAK bool tud_audio_get_req_itf_cb(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; (void) p_request; TU_LOG2(" No interface get request callback available!\r\n"); - return false; // Stall + return false;// Stall } // Invoked when audio class specific get request received for an entity -TU_ATTR_WEAK bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const * p_request) { +TU_ATTR_WEAK bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; (void) p_request; TU_LOG2(" No entity get request callback available!\r\n"); - return false; // Stall + return false;// Stall } //--------------------------------------------------------------------+ @@ -601,54 +601,52 @@ TU_ATTR_WEAK bool tud_audio_get_req_entity_cb(uint8_t rhport, tusb_control_reque tu_static CFG_TUD_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT -static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received); +static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received); #endif #if CFG_TUD_AUDIO_ENABLE_DECODING && CFG_TUD_AUDIO_ENABLE_EP_OUT -static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received); +static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received); #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN -static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t* audio); +static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t *audio); #endif #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN -static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audio); +static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t *audio); #endif -static bool audiod_get_interface(uint8_t rhport, tusb_control_request_t const * p_request); -static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * p_request); +static bool audiod_get_interface(uint8_t rhport, tusb_control_request_t const *p_request); +static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p_request); static bool audiod_get_AS_interface_index_global(uint8_t itf, uint8_t *func_id, uint8_t *idxItf, uint8_t const **pp_desc_int); -static bool audiod_get_AS_interface_index(uint8_t itf, audiod_function_t * audio, uint8_t *idxItf, uint8_t const **pp_desc_int); +static bool audiod_get_AS_interface_index(uint8_t itf, audiod_function_t *audio, uint8_t *idxItf, uint8_t const **pp_desc_int); static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t *func_id); static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id); static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id); -static uint8_t audiod_get_audio_fct_idx(audiod_function_t * audio); +static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); #if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) -static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * p_desc, uint8_t const * p_desc_end, uint8_t const as_itf); +static void audiod_parse_for_AS_params(audiod_function_t *audio, uint8_t const *p_desc, uint8_t const *p_desc_end, uint8_t const as_itf); -static inline uint8_t tu_desc_subtype(void const* desc) -{ - return ((uint8_t const*) desc)[2]; +static inline uint8_t tu_desc_subtype(void const *desc) { + return ((uint8_t const *) desc)[2]; } #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL -static bool audiod_calc_tx_packet_sz(audiod_function_t* audio); -static uint16_t audiod_tx_packet_size(const uint16_t* norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_size); +static bool audiod_calc_tx_packet_sz(audiod_function_t *audio); +static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_size); #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP -static bool audiod_set_fb_params_freq(audiod_function_t* audio, uint32_t sample_freq, uint32_t mclk_freq); -static void audiod_fb_fifo_count_update(audiod_function_t* audio, uint16_t lvl_new); +static bool audiod_set_fb_params_freq(audiod_function_t *audio, uint32_t sample_freq, uint32_t mclk_freq); +static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_new); #endif -bool tud_audio_n_mounted(uint8_t func_id) -{ +bool tud_audio_n_mounted(uint8_t func_id) { TU_VERIFY(func_id < CFG_TUD_AUDIO); - audiod_function_t* audio = &_audiod_fct[func_id]; + audiod_function_t *audio = &_audiod_fct[func_id]; return audio->mounted; } @@ -659,27 +657,23 @@ bool tud_audio_n_mounted(uint8_t func_id) #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING -uint16_t tud_audio_n_available(uint8_t func_id) -{ +uint16_t tud_audio_n_available(uint8_t func_id) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); return tu_fifo_count(&_audiod_fct[func_id].ep_out_ff); } -uint16_t tud_audio_n_read(uint8_t func_id, void* buffer, uint16_t bufsize) -{ +uint16_t tud_audio_n_read(uint8_t func_id, void *buffer, uint16_t bufsize) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); return tu_fifo_read_n(&_audiod_fct[func_id].ep_out_ff, buffer, bufsize); } -bool tud_audio_n_clear_ep_out_ff(uint8_t func_id) -{ +bool tud_audio_n_clear_ep_out_ff(uint8_t func_id) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); return tu_fifo_clear(&_audiod_fct[func_id].ep_out_ff); } -tu_fifo_t* tud_audio_n_get_ep_out_ff(uint8_t func_id) -{ - if(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL) return &_audiod_fct[func_id].ep_out_ff; +tu_fifo_t *tud_audio_n_get_ep_out_ff(uint8_t func_id) { + if (func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL) return &_audiod_fct[func_id].ep_out_ff; return NULL; } @@ -687,27 +681,23 @@ tu_fifo_t* tud_audio_n_get_ep_out_ff(uint8_t func_id) #if CFG_TUD_AUDIO_ENABLE_DECODING && CFG_TUD_AUDIO_ENABLE_EP_OUT // Delete all content in the support RX FIFOs -bool tud_audio_n_clear_rx_support_ff(uint8_t func_id, uint8_t ff_idx) -{ +bool tud_audio_n_clear_rx_support_ff(uint8_t func_id, uint8_t ff_idx) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff); return tu_fifo_clear(&_audiod_fct[func_id].rx_supp_ff[ff_idx]); } -uint16_t tud_audio_n_available_support_ff(uint8_t func_id, uint8_t ff_idx) -{ +uint16_t tud_audio_n_available_support_ff(uint8_t func_id, uint8_t ff_idx) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff); return tu_fifo_count(&_audiod_fct[func_id].rx_supp_ff[ff_idx]); } -uint16_t tud_audio_n_read_support_ff(uint8_t func_id, uint8_t ff_idx, void* buffer, uint16_t bufsize) -{ +uint16_t tud_audio_n_read_support_ff(uint8_t func_id, uint8_t ff_idx, void *buffer, uint16_t bufsize) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff); return tu_fifo_read_n(&_audiod_fct[func_id].rx_supp_ff[ff_idx], buffer, bufsize); } -tu_fifo_t* tud_audio_n_get_rx_support_ff(uint8_t func_id, uint8_t ff_idx) -{ - if(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff) return &_audiod_fct[func_id].rx_supp_ff[ff_idx]; +tu_fifo_t *tud_audio_n_get_rx_support_ff(uint8_t func_id, uint8_t ff_idx) { + if (func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff) return &_audiod_fct[func_id].rx_supp_ff[ff_idx]; return NULL; } #endif @@ -717,8 +707,7 @@ tu_fifo_t* tud_audio_n_get_rx_support_ff(uint8_t func_id, uint8_t ff_idx) #if CFG_TUD_AUDIO_ENABLE_EP_OUT -static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received) -{ +static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received) { uint8_t idxItf = 0; uint8_t const *dummy2; uint8_t idx_audio_fct = 0; @@ -729,10 +718,9 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t // Call a weak callback here - a possibility for user to get informed an audio packet was received and data gets now loaded into EP FIFO (or decoded into support RX software FIFO) TU_VERIFY(tud_audio_rx_done_pre_read_cb(rhport, n_bytes_received, idx_audio_fct, audio->ep_out, audio->alt_setting[idxItf])); -#if CFG_TUD_AUDIO_ENABLE_DECODING + #if CFG_TUD_AUDIO_ENABLE_DECODING - switch (audio->format_type_rx) - { + switch (audio->format_type_rx) { case AUDIO_FORMAT_TYPE_UNDEFINED: // INDIVIDUAL DECODING PROCEDURE REQUIRED HERE! TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT encoding not implemented!\r\n"); @@ -741,8 +729,7 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t case AUDIO_FORMAT_TYPE_I: - switch (audio->format_type_I_rx) - { + switch (audio->format_type_I_rx) { case AUDIO_DATA_FORMAT_TYPE_I_PCM: TU_VERIFY(audiod_decode_type_I_pcm(rhport, audio, n_bytes_received)); break; @@ -755,37 +742,36 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t } break; - default: - // Desired CFG_TUD_AUDIO_FORMAT_TYPE_RX not implemented! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_RX not implemented!\r\n"); - TU_BREAKPOINT(); - break; + default: + // Desired CFG_TUD_AUDIO_FORMAT_TYPE_RX not implemented! + TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_RX not implemented!\r\n"); + TU_BREAKPOINT(); + break; } // Prepare for next transmission TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); -#else + #else -#if USE_LINEAR_BUFFER_RX + #if USE_LINEAR_BUFFER_RX // Data currently is in linear buffer, copy into EP OUT FIFO TU_VERIFY(tu_fifo_write_n(&audio->ep_out_ff, audio->lin_buf_out, n_bytes_received)); // Schedule for next receive TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); -#else + #else // Data is already placed in EP FIFO, schedule for next receive TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_out, &audio->ep_out_ff, audio->ep_out_sz), false); -#endif + #endif -#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if(audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FIFO_COUNT) - { + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + if (audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FIFO_COUNT) { audiod_fb_fifo_count_update(audio, tu_fifo_count(&audio->ep_out_ff)); } -#endif + #endif -#endif + #endif // Call a weak callback here - a possibility for user to get informed decoding was completed TU_VERIFY(tud_audio_rx_done_post_read_cb(rhport, n_bytes_received, idx_audio_fct, audio->ep_out, audio->alt_setting[idxItf])); @@ -793,7 +779,7 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t return true; } -#endif //CFG_TUD_AUDIO_ENABLE_EP_OUT +#endif//CFG_TUD_AUDIO_ENABLE_EP_OUT // The following functions are used in case CFG_TUD_AUDIO_ENABLE_DECODING != 0 #if CFG_TUD_AUDIO_ENABLE_DECODING && CFG_TUD_AUDIO_ENABLE_EP_OUT @@ -801,49 +787,38 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t // Decoding according to 2.3.1.5 Audio Streams // Helper function -static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesPerSample, void * dst, const void * dst_end, void * src, uint8_t const n_ff_used) -{ +static inline void *audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesPerSample, void *dst, const void *dst_end, void *src, uint8_t const n_ff_used) { // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) - uint16_t * dst16 = dst; - uint16_t * src16 = src; - const uint16_t * dst_end16 = dst_end; - uint32_t * dst32 = dst; - uint32_t * src32 = src; - const uint32_t * dst_end32 = dst_end; - - if (nBytesPerSample == 1) - { - while(dst16 < dst_end16) - { + uint16_t *dst16 = dst; + uint16_t *src16 = src; + const uint16_t *dst_end16 = dst_end; + uint32_t *dst32 = dst; + uint32_t *src32 = src; + const uint32_t *dst_end32 = dst_end; + + if (nBytesPerSample == 1) { + while (dst16 < dst_end16) { *dst16++ = *src16++; src16 += n_ff_used - 1; } return src16; - } - else if (nBytesPerSample == 2) - { - while(dst32 < dst_end32) - { + } else if (nBytesPerSample == 2) { + while (dst32 < dst_end32) { *dst32++ = *src32++; src32 += n_ff_used - 1; } return src32; - } - else if (nBytesPerSample == 3) - { - while(dst16 < dst_end16) - { + } else if (nBytesPerSample == 3) { + while (dst16 < dst_end16) { *dst16++ = *src16++; *dst16++ = *src16++; *dst16++ = *src16++; src16 += 3 * (n_ff_used - 1); } return src16; - } - else // nBytesPerSample == 4 + } else// nBytesPerSample == 4 { - while(dst32 < dst_end32) - { + while (dst32 < dst_end32) { *dst32++ = *src32++; *dst32++ = *src32++; src32 += 2 * (n_ff_used - 1); @@ -852,36 +827,32 @@ static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nB } } -static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received) -{ +static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received) { (void) rhport; // Determine amount of samples - uint8_t const n_ff_used = audio->n_ff_used_rx; - uint16_t const nBytesPerFFToRead = n_bytes_received / n_ff_used; + uint8_t const n_ff_used = audio->n_ff_used_rx; + uint16_t const nBytesPerFFToRead = n_bytes_received / n_ff_used; uint8_t cnt_ff; // Decode - uint8_t * src; - uint8_t * dst_end; + uint8_t *src; + uint8_t *dst_end; tu_fifo_buffer_info_t info; - for (cnt_ff = 0; cnt_ff < n_ff_used; cnt_ff++) - { + for (cnt_ff = 0; cnt_ff < n_ff_used; cnt_ff++) { tu_fifo_get_write_info(&audio->rx_supp_ff[cnt_ff], &info); - if (info.len_lin != 0) - { + if (info.len_lin != 0) { info.len_lin = tu_min16(nBytesPerFFToRead, info.len_lin); - src = &audio->lin_buf_out[cnt_ff*audio->n_channels_per_ff_rx * audio->n_bytes_per_sample_rx]; + src = &audio->lin_buf_out[cnt_ff * audio->n_channels_per_ff_rx * audio->n_bytes_per_sample_rx]; dst_end = info.ptr_lin + info.len_lin; src = audiod_interleaved_copy_bytes_fast_decode(audio->n_bytes_per_sample_rx, info.ptr_lin, dst_end, src, n_ff_used); // Handle wrapped part of FIFO info.len_wrap = tu_min16(nBytesPerFFToRead - info.len_lin, info.len_wrap); - if (info.len_wrap != 0) - { + if (info.len_wrap != 0) { dst_end = info.ptr_wrap + info.len_wrap; audiod_interleaved_copy_bytes_fast_decode(audio->n_bytes_per_sample_rx, info.ptr_wrap, dst_end, src, n_ff_used); } @@ -892,16 +863,15 @@ static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t* audio, u // Number of bytes should be a multiple of CFG_TUD_AUDIO_N_BYTES_PER_SAMPLE_RX * CFG_TUD_AUDIO_N_CHANNELS_RX but checking makes no sense - no way to correct it // TU_VERIFY(cnt != n_bytes); -#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if(audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FIFO_COUNT) - { + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + if (audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FIFO_COUNT) { audiod_fb_fifo_count_update(audio, tu_fifo_count(&audio->rx_supp_ff[0])); } -#endif + #endif return true; } -#endif //CFG_TUD_AUDIO_ENABLE_DECODING +#endif//CFG_TUD_AUDIO_ENABLE_DECODING //--------------------------------------------------------------------+ // WRITE API @@ -920,21 +890,19 @@ static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t* audio, u * \param[in] len: # of array elements to copy * \return Number of bytes actually written */ -uint16_t tud_audio_n_write(uint8_t func_id, const void * data, uint16_t len) -{ +uint16_t tud_audio_n_write(uint8_t func_id, const void *data, uint16_t len) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); return tu_fifo_write_n(&_audiod_fct[func_id].ep_in_ff, data, len); } -bool tud_audio_n_clear_ep_in_ff(uint8_t func_id) // Delete all content in the EP IN FIFO +bool tud_audio_n_clear_ep_in_ff(uint8_t func_id)// Delete all content in the EP IN FIFO { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); return tu_fifo_clear(&_audiod_fct[func_id].ep_in_ff); } -tu_fifo_t* tud_audio_n_get_ep_in_ff(uint8_t func_id) -{ - if(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL) return &_audiod_fct[func_id].ep_in_ff; +tu_fifo_t *tud_audio_n_get_ep_in_ff(uint8_t func_id) { + if (func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL) return &_audiod_fct[func_id].ep_in_ff; return NULL; } @@ -942,36 +910,33 @@ tu_fifo_t* tud_audio_n_get_ep_in_ff(uint8_t func_id) #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN -uint16_t tud_audio_n_flush_tx_support_ff(uint8_t func_id) // Force all content in the support TX FIFOs to be written into linear buffer and schedule a transmit +uint16_t tud_audio_n_flush_tx_support_ff(uint8_t func_id)// Force all content in the support TX FIFOs to be written into linear buffer and schedule a transmit { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); - audiod_function_t* audio = &_audiod_fct[func_id]; + audiod_function_t *audio = &_audiod_fct[func_id]; uint16_t n_bytes_copied = tu_fifo_count(&audio->tx_supp_ff[0]); TU_VERIFY(audiod_tx_done_cb(audio->rhport, audio)); n_bytes_copied -= tu_fifo_count(&audio->tx_supp_ff[0]); - n_bytes_copied = n_bytes_copied*audio->tx_supp_ff[0].item_size; + n_bytes_copied = n_bytes_copied * audio->tx_supp_ff[0].item_size; return n_bytes_copied; } -bool tud_audio_n_clear_tx_support_ff(uint8_t func_id, uint8_t ff_idx) -{ +bool tud_audio_n_clear_tx_support_ff(uint8_t func_id, uint8_t ff_idx) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_tx_supp_ff); return tu_fifo_clear(&_audiod_fct[func_id].tx_supp_ff[ff_idx]); } -uint16_t tud_audio_n_write_support_ff(uint8_t func_id, uint8_t ff_idx, const void * data, uint16_t len) -{ +uint16_t tud_audio_n_write_support_ff(uint8_t func_id, uint8_t ff_idx, const void *data, uint16_t len) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_tx_supp_ff); return tu_fifo_write_n(&_audiod_fct[func_id].tx_supp_ff[ff_idx], data, len); } -tu_fifo_t* tud_audio_n_get_tx_support_ff(uint8_t func_id, uint8_t ff_idx) -{ - if(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_tx_supp_ff) return &_audiod_fct[func_id].tx_supp_ff[ff_idx]; +tu_fifo_t *tud_audio_n_get_tx_support_ff(uint8_t func_id, uint8_t ff_idx) { + if (func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_tx_supp_ff) return &_audiod_fct[func_id].tx_supp_ff[ff_idx]; return NULL; } @@ -980,8 +945,7 @@ tu_fifo_t* tud_audio_n_get_tx_support_ff(uint8_t func_id, uint8_t ff_idx) #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP // If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_done_cb() is called in inform user -bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t * data) -{ +bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); TU_VERIFY(_audiod_fct[func_id].ep_int != 0); @@ -990,12 +954,10 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t * data) TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int)); // Check length - if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio_interrupt_data_t)) == 0) - { + if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio_interrupt_data_t)) == 0) { // Schedule transmit TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf)), 0); - } else - { + } else { // Release endpoint since we don't make any transfer usbd_edpt_release(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int); } @@ -1009,8 +971,7 @@ bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t * data) // n_bytes_copied - Informs caller how many bytes were loaded. In case n_bytes_copied = 0, a ZLP is scheduled to inform host no data is available for current frame. #if CFG_TUD_AUDIO_ENABLE_EP_IN -static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t * audio) -{ +static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t *audio) { uint8_t idxItf; uint8_t const *dummy2; @@ -1028,9 +989,8 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t * audio) uint16_t n_bytes_tx; // If support FIFOs are used, encode and schedule transmit -#if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN - switch (audio->format_type_tx) - { + #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN + switch (audio->format_type_tx) { case AUDIO_FORMAT_TYPE_UNDEFINED: // INDIVIDUAL ENCODING PROCEDURE REQUIRED HERE! TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT encoding not implemented!\r\n"); @@ -1040,8 +1000,7 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t * audio) case AUDIO_FORMAT_TYPE_I: - switch (audio->format_type_I_tx) - { + switch (audio->format_type_I_tx) { case AUDIO_DATA_FORMAT_TYPE_I_PCM: n_bytes_tx = audiod_encode_type_I_pcm(rhport, audio); @@ -1056,33 +1015,33 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t * audio) } break; - default: - // Desired CFG_TUD_AUDIO_FORMAT_TYPE_TX not implemented! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_TX not implemented!\r\n"); - TU_BREAKPOINT(); - n_bytes_tx = 0; - break; + default: + // Desired CFG_TUD_AUDIO_FORMAT_TYPE_TX not implemented! + TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_TX not implemented!\r\n"); + TU_BREAKPOINT(); + n_bytes_tx = 0; + break; } TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, n_bytes_tx)); -#else - // No support FIFOs, if no linear buffer required schedule transmit, else put data into linear buffer and schedule -#if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + #else + // No support FIFOs, if no linear buffer required schedule transmit, else put data into linear buffer and schedule + #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL // packet_sz_tx is based on total packet size, here we want size for each support buffer. n_bytes_tx = audiod_tx_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, audio->ep_in_sz); -#else - n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz); // Limit up to max packet size, more can not be done for ISO -#endif -#if USE_LINEAR_BUFFER_TX + #else + n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz);// Limit up to max packet size, more can not be done for ISO + #endif + #if USE_LINEAR_BUFFER_TX tu_fifo_read_n(&audio->ep_in_ff, audio->lin_buf_in, n_bytes_tx); TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, n_bytes_tx)); -#else + #else // Send everything in ISO EP FIFO TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_in, &audio->ep_in_ff, n_bytes_tx)); -#endif + #endif -#endif + #endif // Call a weak callback here - a possibility for user to get informed former TX was completed and how many bytes were loaded for the next frame TU_VERIFY(tud_audio_tx_done_post_load_cb(rhport, n_bytes_tx, idx_audio_fct, audio->ep_in, audio->alt_setting[idxItf])); @@ -1090,7 +1049,7 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t * audio) return true; } -#endif //CFG_TUD_AUDIO_ENABLE_EP_IN +#endif//CFG_TUD_AUDIO_ENABLE_EP_IN #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN // Take samples from the support buffer and encode them into the IN EP software FIFO @@ -1111,49 +1070,38 @@ range [-1, +1) * */ // Helper function -static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesPerSample, void * src, const void * src_end, void * dst, uint8_t const n_ff_used) -{ +static inline void *audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesPerSample, void *src, const void *src_end, void *dst, uint8_t const n_ff_used) { // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) - uint16_t * dst16 = dst; - uint16_t * src16 = src; - const uint16_t * src_end16 = src_end; - uint32_t * dst32 = dst; - uint32_t * src32 = src; - const uint32_t * src_end32 = src_end; - - if (nBytesPerSample == 1) - { - while(src16 < src_end16) - { + uint16_t *dst16 = dst; + uint16_t *src16 = src; + const uint16_t *src_end16 = src_end; + uint32_t *dst32 = dst; + uint32_t *src32 = src; + const uint32_t *src_end32 = src_end; + + if (nBytesPerSample == 1) { + while (src16 < src_end16) { *dst16++ = *src16++; dst16 += n_ff_used - 1; } return dst16; - } - else if (nBytesPerSample == 2) - { - while(src32 < src_end32) - { + } else if (nBytesPerSample == 2) { + while (src32 < src_end32) { *dst32++ = *src32++; dst32 += n_ff_used - 1; } return dst32; - } - else if (nBytesPerSample == 3) - { - while(src16 < src_end16) - { + } else if (nBytesPerSample == 3) { + while (src16 < src_end16) { *dst16++ = *src16++; *dst16++ = *src16++; *dst16++ = *src16++; dst16 += 3 * (n_ff_used - 1); } return dst16; - } - else // nBytesPerSample == 4 + } else// nBytesPerSample == 4 { - while(src32 < src_end32) - { + while (src32 < src_end32) { *dst32++ = *src32++; *dst32++ = *src32++; dst32 += 2 * (n_ff_used - 1); @@ -1162,8 +1110,7 @@ static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nB } } -static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audio) -{ +static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t *audio) { // This function relies on the fact that the length of the support FIFOs was configured to be a multiple of the active sample size in bytes s.t. no sample is split within a wrap // This is ensured within set_interface, where the FIFOs are reconfigured according to this size @@ -1171,62 +1118,57 @@ static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audi TU_VERIFY(!usbd_edpt_busy(rhport, audio->ep_in)); // Determine amount of samples - uint8_t const n_ff_used = audio->n_ff_used_tx; - uint16_t nBytesPerFFToSend = tu_fifo_count(&audio->tx_supp_ff[0]); + uint8_t const n_ff_used = audio->n_ff_used_tx; + uint16_t nBytesPerFFToSend = tu_fifo_count(&audio->tx_supp_ff[0]); uint8_t cnt_ff; - for (cnt_ff = 1; cnt_ff < n_ff_used; cnt_ff++) - { + for (cnt_ff = 1; cnt_ff < n_ff_used; cnt_ff++) { uint16_t const count = tu_fifo_count(&audio->tx_supp_ff[cnt_ff]); - if (count < nBytesPerFFToSend) - { + if (count < nBytesPerFFToSend) { nBytesPerFFToSend = count; } } -#if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL const uint16_t norm_packet_sz_tx[3] = {audio->packet_sz_tx[0] / n_ff_used, audio->packet_sz_tx[1] / n_ff_used, audio->packet_sz_tx[2] / n_ff_used}; // packet_sz_tx is based on total packet size, here we want size for each support buffer. nBytesPerFFToSend = audiod_tx_packet_size(norm_packet_sz_tx, nBytesPerFFToSend, audio->tx_supp_ff[0].depth, audio->ep_in_sz / n_ff_used); // Check if there is enough data - if (nBytesPerFFToSend == 0) return 0; -#else + if (nBytesPerFFToSend == 0) return 0; + #else // Check if there is enough data - if (nBytesPerFFToSend == 0) return 0; + if (nBytesPerFFToSend == 0) return 0; // Limit to maximum sample number - THIS IS A POSSIBLE ERROR SOURCE IF TOO MANY SAMPLE WOULD NEED TO BE SENT BUT CAN NOT! nBytesPerFFToSend = tu_min16(nBytesPerFFToSend, audio->ep_in_sz / n_ff_used); // Round to full number of samples (flooring) uint16_t const nSlotSize = audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx; nBytesPerFFToSend = (nBytesPerFFToSend / nSlotSize) * nSlotSize; -#endif + #endif // Encode - uint8_t * dst; - uint8_t * src_end; + uint8_t *dst; + uint8_t *src_end; tu_fifo_buffer_info_t info; - for (cnt_ff = 0; cnt_ff < n_ff_used; cnt_ff++) - { - dst = &audio->lin_buf_in[cnt_ff*audio->n_channels_per_ff_tx*audio->n_bytes_per_sample_tx]; + for (cnt_ff = 0; cnt_ff < n_ff_used; cnt_ff++) { + dst = &audio->lin_buf_in[cnt_ff * audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx]; tu_fifo_get_read_info(&audio->tx_supp_ff[cnt_ff], &info); - if (info.len_lin != 0) - { - info.len_lin = tu_min16(nBytesPerFFToSend, info.len_lin); // Limit up to desired length - src_end = (uint8_t *)info.ptr_lin + info.len_lin; + if (info.len_lin != 0) { + info.len_lin = tu_min16(nBytesPerFFToSend, info.len_lin);// Limit up to desired length + src_end = (uint8_t *) info.ptr_lin + info.len_lin; dst = audiod_interleaved_copy_bytes_fast_encode(audio->n_bytes_per_sample_tx, info.ptr_lin, src_end, dst, n_ff_used); // Limit up to desired length info.len_wrap = tu_min16(nBytesPerFFToSend - info.len_lin, info.len_wrap); // Handle wrapped part of FIFO - if (info.len_wrap != 0) - { - src_end = (uint8_t *)info.ptr_wrap + info.len_wrap; + if (info.len_wrap != 0) { + src_end = (uint8_t *) info.ptr_wrap + info.len_wrap; audiod_interleaved_copy_bytes_fast_encode(audio->n_bytes_per_sample_tx, info.ptr_wrap, src_end, dst, n_ff_used); } @@ -1236,26 +1178,23 @@ static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audi return nBytesPerFFToSend * n_ff_used; } -#endif //CFG_TUD_AUDIO_ENABLE_ENCODING +#endif//CFG_TUD_AUDIO_ENABLE_ENCODING // This function is called once a transmit of a feedback packet was successfully completed. Here, we get the next feedback value to be sent #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP -static inline bool audiod_fb_send(audiod_function_t *audio) -{ +static inline bool audiod_fb_send(audiod_function_t *audio) { bool apply_correction = (TUSB_SPEED_FULL == tud_speed_get()) && audio->feedback.format_correction; // Format the feedback value - if (apply_correction) - { - uint8_t * fb = (uint8_t *) audio->fb_buf; + if (apply_correction) { + uint8_t *fb = (uint8_t *) audio->fb_buf; // For FS format is 10.14 *(fb++) = (audio->feedback.value >> 2) & 0xFF; *(fb++) = (audio->feedback.value >> 10) & 0xFF; *(fb++) = (audio->feedback.value >> 18) & 0xFF; *fb = 0; - } else - { + } else { *audio->fb_buf = audio->feedback.value; } @@ -1279,17 +1218,14 @@ static inline bool audiod_fb_send(audiod_function_t *audio) //--------------------------------------------------------------------+ // USBD Driver API //--------------------------------------------------------------------+ -void audiod_init(void) -{ +void audiod_init(void) { tu_memclr(_audiod_fct, sizeof(_audiod_fct)); - for(uint8_t i=0; ictrl_buf = ctrl_buf_1; audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ; @@ -1309,8 +1245,7 @@ void audiod_init(void) } // Initialize active alternate interface buffers - switch (i) - { + switch (i) { #if CFG_TUD_AUDIO_FUNC_1_N_AS_INT > 0 case 0: audio->alt_setting = alt_setting_1; @@ -1328,302 +1263,285 @@ void audiod_init(void) #endif } - // Initialize IN EP FIFO if required + // Initialize IN EP FIFO if required #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 case 0: tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_in_ff, osal_mutex_create(&ep_in_ff_mutex_wr_1), NULL); -#endif + #endif break; -#endif -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 case 1: tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_in_ff, osal_mutex_create(&ep_in_ff_mutex_wr_2), NULL); -#endif + #endif break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 case 2: tu_fifo_config(&audio->ep_in_ff, ep_in_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_in_ff, osal_mutex_create(&ep_in_ff_mutex_wr_3), NULL); -#endif + #endif break; -#endif + #endif } -#endif // CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING - // Initialize linear buffers + // Initialize linear buffers #if USE_LINEAR_BUFFER_TX - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 case 0: audio->lin_buf_in = lin_buf_in.buf_1; break; -#endif -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 case 1: audio->lin_buf_in = lin_buf_in.buf_2; break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 case 2: audio->lin_buf_in = lin_buf_in.buf_3; break; -#endif + #endif } -#endif // USE_LINEAR_BUFFER_TX +#endif// USE_LINEAR_BUFFER_TX - // Initialize OUT EP FIFO if required + // Initialize OUT EP FIFO if required #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 case 0: tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_out_ff, NULL, osal_mutex_create(&ep_out_ff_mutex_rd_1)); -#endif + #endif break; -#endif -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 case 1: tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_2, CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_out_ff, NULL, osal_mutex_create(&ep_out_ff_mutex_rd_2)); -#endif + #endif break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 case 2: tu_fifo_config(&audio->ep_out_ff, ep_out_sw_buf.buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&audio->ep_out_ff, NULL, osal_mutex_create(&ep_out_ff_mutex_rd_3)); -#endif + #endif break; -#endif + #endif } -#endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING - // Initialize linear buffers + // Initialize linear buffers #if USE_LINEAR_BUFFER_RX - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 case 0: audio->lin_buf_out = lin_buf_out.buf_1; break; -#endif -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 case 1: audio->lin_buf_out = lin_buf_out.buf_2; break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 case 2: audio->lin_buf_out = lin_buf_out.buf_3; break; -#endif + #endif } -#endif // USE_LINEAR_BUFFER_RX +#endif// USE_LINEAR_BUFFER_RX #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 case 0: audio->fb_buf = &fb_ep_buf.buf_1; break; -#endif -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 case 1: audio->fb_buf = &fb_ep_buf.buf_2; break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 case 2: audio->fb_buf = &fb_ep_buf.buf_3; break; -#endif + #endif } -#endif // CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +#endif// CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - // Initialize TX support FIFOs if required + // Initialize TX support FIFOs if required #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 case 0: audio->tx_supp_ff = tx_supp_ff_1; audio->n_tx_supp_ff = CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; audio->tx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++) - { + for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++) { tu_fifo_config(&tx_supp_ff_1[cnt], tx_supp_ff_buf_1[cnt], CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&tx_supp_ff_1[cnt], osal_mutex_create(&tx_supp_ff_mutex_wr_1[cnt]), NULL); -#endif + #endif } break; -#endif // CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 + #endif// CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 case 1: audio->tx_supp_ff = tx_supp_ff_2; audio->n_tx_supp_ff = CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO; audio->tx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO; cnt++) - { + for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO; cnt++) { tu_fifo_config(&tx_supp_ff_2[cnt], tx_supp_ff_buf_2[cnt], CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&tx_supp_ff_2[cnt], osal_mutex_create(&tx_supp_ff_mutex_wr_2[cnt]), NULL); -#endif + #endif } break; -#endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 + #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 case 2: audio->tx_supp_ff = tx_supp_ff_3; audio->n_tx_supp_ff = CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO; audio->tx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO; cnt++) - { + for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO; cnt++) { tu_fifo_config(&tx_supp_ff_3[cnt], tx_supp_ff_buf_3[cnt], CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&tx_supp_ff_3[cnt], osal_mutex_create(&tx_supp_ff_mutex_wr_3[cnt]), NULL); -#endif + #endif } break; -#endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 + #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 } -#endif // CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - // Set encoding parameters for Type_I formats + // Set encoding parameters for Type_I formats #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 case 0: audio->n_channels_per_ff_tx = CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX; break; -#endif -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 case 1: audio->n_channels_per_ff_tx = CFG_TUD_AUDIO_FUNC_2_CHANNEL_PER_FIFO_TX; break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 case 2: audio->n_channels_per_ff_tx = CFG_TUD_AUDIO_FUNC_3_CHANNEL_PER_FIFO_TX; break; -#endif + #endif } -#endif // CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING +#endif// CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - // Initialize RX support FIFOs if required + // Initialize RX support FIFOs if required #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 case 0: audio->rx_supp_ff = rx_supp_ff_1; audio->n_rx_supp_ff = CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO; audio->rx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO; cnt++) - { + for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO; cnt++) { tu_fifo_config(&rx_supp_ff_1[cnt], rx_supp_ff_buf_1[cnt], CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&rx_supp_ff_1[cnt], osal_mutex_create(&rx_supp_ff_mutex_rd_1[cnt]), NULL); -#endif + #endif } break; -#endif // CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 + #endif// CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 case 1: audio->rx_supp_ff = rx_supp_ff_2; audio->n_rx_supp_ff = CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO; audio->rx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO; cnt++) - { + for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO; cnt++) { tu_fifo_config(&rx_supp_ff_2[cnt], rx_supp_ff_buf_2[cnt], CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&rx_supp_ff_2[cnt], osal_mutex_create(&rx_supp_ff_mutex_rd_2[cnt]), NULL); -#endif + #endif } break; -#endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 + #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 case 2: audio->rx_supp_ff = rx_supp_ff_3; audio->n_rx_supp_ff = CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO; audio->rx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO; cnt++) - { + for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO; cnt++) { tu_fifo_config(&rx_supp_ff_3[cnt], rx_supp_ff_buf_3[cnt], CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ, 1, true); -#if CFG_FIFO_MUTEX + #if CFG_FIFO_MUTEX tu_fifo_config_mutex(&rx_supp_ff_3[cnt], osal_mutex_create(&rx_supp_ff_mutex_rd_3[cnt]), NULL); -#endif + #endif } break; -#endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 + #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 } -#endif // CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - // Set encoding parameters for Type_I formats + // Set encoding parameters for Type_I formats #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - switch (i) - { -#if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 + switch (i) { + #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 case 0: audio->n_channels_per_ff_rx = CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_RX; break; -#endif -#if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 case 1: audio->n_channels_per_ff_rx = CFG_TUD_AUDIO_FUNC_2_CHANNEL_PER_FIFO_RX; break; -#endif -#if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 + #endif + #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 case 2: audio->n_channels_per_ff_rx = CFG_TUD_AUDIO_FUNC_3_CHANNEL_PER_FIFO_RX; break; -#endif + #endif } -#endif // CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING +#endif// CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING } } bool audiod_deinit(void) { - return false; // TODO not implemented yet + return false;// TODO not implemented yet } -void audiod_reset(uint8_t rhport) -{ +void audiod_reset(uint8_t rhport) { (void) rhport; - for(uint8_t i=0; in_tx_supp_ff; cnt++) - { + for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { tu_fifo_clear(&audio->tx_supp_ff[cnt]); } #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) - { + for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) { tu_fifo_clear(&audio->rx_supp_ff[cnt]); } #endif } } -uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint16_t max_len) -{ +uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint16_t max_len) { (void) max_len; - TU_VERIFY ( TUSB_CLASS_AUDIO == itf_desc->bInterfaceClass && - AUDIO_SUBCLASS_CONTROL == itf_desc->bInterfaceSubClass); + TU_VERIFY(TUSB_CLASS_AUDIO == itf_desc->bInterfaceClass && + AUDIO_SUBCLASS_CONTROL == itf_desc->bInterfaceSubClass); // Verify version is correct - this check can be omitted TU_VERIFY(itf_desc->bInterfaceProtocol == AUDIO_INT_PROTOCOL_CODE_V2); // Verify interrupt control EP is enabled if demanded by descriptor - TU_ASSERT(itf_desc->bNumEndpoints <= 1); // 0 or 1 EPs are allowed - if (itf_desc->bNumEndpoints == 1) - { + TU_ASSERT(itf_desc->bNumEndpoints <= 1);// 0 or 1 EPs are allowed + if (itf_desc->bNumEndpoints == 1) { TU_ASSERT(CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP); } @@ -1672,16 +1586,13 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin // Find available audio driver interface uint8_t i; - for (i = 0; i < CFG_TUD_AUDIO; i++) - { - if (!_audiod_fct[i].p_desc) - { - _audiod_fct[i].p_desc = (uint8_t const *)itf_desc; // Save pointer to AC descriptor which is by specification always the first one + for (i = 0; i < CFG_TUD_AUDIO; i++) { + if (!_audiod_fct[i].p_desc) { + _audiod_fct[i].p_desc = (uint8_t const *) itf_desc;// Save pointer to AC descriptor which is by specification always the first one _audiod_fct[i].rhport = rhport; // Setup descriptor lengths - switch (i) - { + switch (i) { case 0: _audiod_fct[i].desc_length = CFG_TUD_AUDIO_FUNC_1_DESC_LEN; break; @@ -1700,12 +1611,12 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin #ifdef TUP_DCD_EDPT_ISO_ALLOC { #if CFG_TUD_AUDIO_ENABLE_EP_IN - uint8_t ep_in = 0; + uint8_t ep_in = 0; uint16_t ep_in_size = 0; #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT - uint8_t ep_out = 0; + uint8_t ep_out = 0; uint16_t ep_out_size = 0; #endif @@ -1715,38 +1626,30 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin uint8_t const *p_desc = _audiod_fct[i].p_desc; uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) - { + while (p_desc_end - p_desc > 0) { + if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; - if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) - { + if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // Explicit feedback EP - if (desc_ep->bmAttributes.usage == 1) - { + if (desc_ep->bmAttributes.usage == 1) { ep_fb = desc_ep->bEndpointAddress; } #endif // Data EP - if (desc_ep->bmAttributes.usage == 0) - { - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { + if (desc_ep->bmAttributes.usage == 0) { + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { #if CFG_TUD_AUDIO_ENABLE_EP_IN ep_in = desc_ep->bEndpointAddress; ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); #endif - } else - { + } else { #if CFG_TUD_AUDIO_ENABLE_EP_OUT ep_out = desc_ep->bEndpointAddress; ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); #endif } } - } } @@ -1754,76 +1657,62 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin } #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (ep_in) - { + if (ep_in) { usbd_edpt_iso_alloc(rhport, ep_in, ep_in_size); } #endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT - if (ep_out) - { + if (ep_out) { usbd_edpt_iso_alloc(rhport, ep_out, ep_out_size); } #endif #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if (ep_fb) - { + if (ep_fb) { usbd_edpt_iso_alloc(rhport, ep_fb, 4); } #endif } -#endif // TUP_DCD_EDPT_ISO_ALLOC +#endif// TUP_DCD_EDPT_ISO_ALLOC #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL { uint8_t const *p_desc = _audiod_fct[i].p_desc; uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) - { + while (p_desc_end - p_desc > 0) { + if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; - if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) - { - if (desc_ep->bmAttributes.usage == 0) - { - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { + if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { + if (desc_ep->bmAttributes.usage == 0) { + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { _audiod_fct[i].interval_tx = desc_ep->bInterval; } } } - } else - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL) - { - if(tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) - { - _audiod_fct[i].bclock_id_tx = p_desc[8]; + } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL) { + if (tu_unaligned_read16(p_desc + 4) == AUDIO_TERM_TYPE_USB_STREAMING) { + _audiod_fct[i].bclock_id_tx = p_desc[8]; } } p_desc = tu_desc_next(p_desc); } } -#endif // CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +#endif// CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP { uint8_t const *p_desc = _audiod_fct[i].p_desc; uint8_t const *p_desc_end = p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { + while (p_desc_end - p_desc > 0) { // For each endpoint - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) - { - tusb_desc_endpoint_t const* desc_ep = (tusb_desc_endpoint_t const *) p_desc; + if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; uint8_t const ep_addr = desc_ep->bEndpointAddress; // If endpoint is input-direction and interrupt-type - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.xfer == TUSB_XFER_INTERRUPT) - { + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.xfer == TUSB_XFER_INTERRUPT) { // Store endpoint number and open endpoint _audiod_fct[i].ep_int = ep_addr; TU_ASSERT(usbd_edpt_open(_audiod_fct[i].rhport, desc_ep)); @@ -1840,16 +1729,15 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uin } // Verify we found a free one - TU_ASSERT( i < CFG_TUD_AUDIO ); + TU_ASSERT(i < CFG_TUD_AUDIO); // This is all we need so far - the EPs are setup by a later set_interface request (as per UAC2 specification) - uint16_t drv_len = _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; // - TUD_AUDIO_DESC_IAD_LEN since tinyUSB already handles the IAD descriptor + uint16_t drv_len = _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN;// - TUD_AUDIO_DESC_IAD_LEN since tinyUSB already handles the IAD descriptor return drv_len; } -static bool audiod_get_interface(uint8_t rhport, tusb_control_request_t const * p_request) -{ +static bool audiod_get_interface(uint8_t rhport, tusb_control_request_t const *p_request) { uint8_t const itf = tu_u16_low(p_request->wIndex); // Find index of audio streaming interface @@ -1864,8 +1752,7 @@ static bool audiod_get_interface(uint8_t rhport, tusb_control_request_t const * return true; } -static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * p_request) -{ +static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; // Here we need to do the following: @@ -1889,12 +1776,11 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * uint8_t const *p_desc; TU_VERIFY(audiod_get_AS_interface_index_global(itf, &func_id, &idxItf, &p_desc)); - audiod_function_t* audio = &_audiod_fct[func_id]; + audiod_function_t *audio = &_audiod_fct[func_id]; - // Look if there is an EP to be closed - for this driver, there are only 3 possible EPs which may be closed (only AS related EPs can be closed, AC EP (if present) is always open) +// Look if there is an EP to be closed - for this driver, there are only 3 possible EPs which may be closed (only AS related EPs can be closed, AC EP (if present) is always open) #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (audio->ep_in_as_intf_num == itf) - { + if (audio->ep_in_as_intf_num == itf) { audio->ep_in_as_intf_num = 0; #ifndef TUP_DCD_EDPT_ISO_ALLOC usbd_edpt_close(rhport, audio->ep_in); @@ -1904,8 +1790,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * #if !CFG_TUD_AUDIO_ENABLE_ENCODING tu_fifo_clear(&audio->ep_in_ff); #else - for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) - { + for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { tu_fifo_clear(&audio->tx_supp_ff[cnt]); } #endif @@ -1913,7 +1798,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // Invoke callback - can be used to stop data sampling TU_VERIFY(tud_audio_set_itf_close_EP_cb(rhport, p_request)); - audio->ep_in = 0; // Necessary? + audio->ep_in = 0;// Necessary? #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL audio->packet_sz_tx[0] = 0; @@ -1921,11 +1806,10 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * audio->packet_sz_tx[2] = 0; #endif } -#endif // CFG_TUD_AUDIO_ENABLE_EP_IN +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN #if CFG_TUD_AUDIO_ENABLE_EP_OUT - if (audio->ep_out_as_intf_num == itf) - { + if (audio->ep_out_as_intf_num == itf) { audio->ep_out_as_intf_num = 0; #ifndef TUP_DCD_EDPT_ISO_ALLOC usbd_edpt_close(rhport, audio->ep_out); @@ -1935,8 +1819,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * #if !CFG_TUD_AUDIO_ENABLE_DECODING tu_fifo_clear(&audio->ep_out_ff); #else - for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) - { + for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) { tu_fifo_clear(&audio->rx_supp_ff[cnt]); } #endif @@ -1944,7 +1827,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // Invoke callback - can be used to stop data sampling TU_VERIFY(tud_audio_set_itf_close_EP_cb(rhport, p_request)); - audio->ep_out = 0; // Necessary? + audio->ep_out = 0;// Necessary? // Close corresponding feedback EP #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP @@ -1955,7 +1838,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * tu_memclr(&audio->feedback, sizeof(audio->feedback)); #endif } -#endif // CFG_TUD_AUDIO_ENABLE_EP_OUT +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT // Save current alternative interface setting audio->alt_setting[idxItf] = alt; @@ -1966,22 +1849,18 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // p_desc starts at required interface with alternate setting zero // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { + while (p_desc_end - p_desc > 0) { // Find correct interface - if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const * )p_desc)->bInterfaceNumber == itf && ((tusb_desc_interface_t const * )p_desc)->bAlternateSetting == alt) - { + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceNumber == itf && ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == alt) { #if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) - uint8_t const * p_desc_parse_for_params = p_desc; + uint8_t const *p_desc_parse_for_params = p_desc; #endif // From this point forward follow the EP descriptors associated to the current alternate setting interface - Open EPs if necessary - uint8_t foundEPs = 0, nEps = ((tusb_desc_interface_t const * )p_desc)->bNumEndpoints; + uint8_t foundEPs = 0, nEps = ((tusb_desc_interface_t const *) p_desc)->bNumEndpoints; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (foundEPs < nEps && (p_desc_end - p_desc > 0)) - { - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) - { - tusb_desc_endpoint_t const* desc_ep = (tusb_desc_endpoint_t const *) p_desc; + while (foundEPs < nEps && (p_desc_end - p_desc > 0)) { + if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; #ifdef TUP_DCD_EDPT_ISO_ALLOC TU_ASSERT(usbd_edpt_iso_activate(rhport, desc_ep)); #else @@ -1993,7 +1872,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * usbd_edpt_clear_stall(rhport, ep_addr); #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.usage == 0x00) // Check if usage is data EP + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.usage == 0x00)// Check if usage is data EP { // Save address audio->ep_in = ep_addr; @@ -2004,16 +1883,14 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * #if CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL audiod_parse_for_AS_params(audio, p_desc_parse_for_params, p_desc_end, itf); - // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap + // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - const uint16_t active_fifo_depth = (uint16_t) ((audio->tx_supp_ff_sz_max / (audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx)) - * (audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx)); - for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) - { + const uint16_t active_fifo_depth = (uint16_t) ((audio->tx_supp_ff_sz_max / (audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx)) * (audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx)); + for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { tu_fifo_config(&audio->tx_supp_ff[cnt], audio->tx_supp_ff[cnt].buffer, active_fifo_depth, 1, true); } audio->n_ff_used_tx = audio->n_channels_tx / audio->n_channels_per_ff_tx; - TU_ASSERT( audio->n_ff_used_tx <= audio->n_tx_supp_ff ); + TU_ASSERT(audio->n_ff_used_tx <= audio->n_tx_supp_ff); #endif #endif @@ -2021,11 +1898,11 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // It is necessary to trigger this here since the refill is done with an RX FIFO empty interrupt which can only trigger if something was in there TU_VERIFY(audiod_tx_done_cb(rhport, &_audiod_fct[func_id])); } -#endif // CFG_TUD_AUDIO_ENABLE_EP_IN +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN #if CFG_TUD_AUDIO_ENABLE_EP_OUT - if (tu_edpt_dir(ep_addr) == TUSB_DIR_OUT) // Checking usage not necessary + if (tu_edpt_dir(ep_addr) == TUSB_DIR_OUT)// Checking usage not necessary { // Save address audio->ep_out = ep_addr; @@ -2035,15 +1912,14 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * #if CFG_TUD_AUDIO_ENABLE_DECODING audiod_parse_for_AS_params(audio, p_desc_parse_for_params, p_desc_end, itf); - // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap + // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING const uint16_t active_fifo_depth = (audio->rx_supp_ff_sz_max / audio->n_bytes_per_sample_rx) * audio->n_bytes_per_sample_rx; - for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) - { + for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) { tu_fifo_config(&audio->rx_supp_ff[cnt], audio->rx_supp_ff[cnt].buffer, active_fifo_depth, 1, true); } audio->n_ff_used_rx = audio->n_channels_rx / audio->n_channels_per_ff_rx; - TU_ASSERT( audio->n_ff_used_rx <= audio->n_rx_supp_ff ); + TU_ASSERT(audio->n_ff_used_rx <= audio->n_rx_supp_ff); #endif #endif @@ -2056,13 +1932,13 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * } #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.usage == 1) // Check if usage is explicit data feedback + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.usage == 1)// Check if usage is explicit data feedback { audio->ep_fb = ep_addr; - audio->feedback.frame_shift = desc_ep->bInterval -1; + audio->feedback.frame_shift = desc_ep->bInterval - 1; } #endif -#endif // CFG_TUD_AUDIO_ENABLE_EP_OUT +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT foundEPs += 1; } @@ -2076,58 +1952,55 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // Prepare feedback computation if endpoint is available - if(audio->ep_fb != 0) - { + if (audio->ep_fb != 0) { audio_feedback_params_t fb_param; tud_audio_feedback_params_cb(func_id, alt, &fb_param); audio->feedback.compute_method = fb_param.method; - if(TUSB_SPEED_FULL == tud_speed_get()) + if (TUSB_SPEED_FULL == tud_speed_get()) audio->feedback.format_correction = tud_audio_feedback_format_correction_cb(func_id); // Minimal/Maximum value in 16.16 format for full speed (1ms per frame) or high speed (125 us per frame) - uint32_t const frame_div = (TUSB_SPEED_FULL == tud_speed_get()) ? 1000 : 8000; - audio->feedback.min_value = ((fb_param.sample_freq - 1)/frame_div) << 16; - audio->feedback.max_value = (fb_param.sample_freq/frame_div + 1) << 16; + uint32_t const frame_div = (TUSB_SPEED_FULL == tud_speed_get()) ? 1000 : 8000; + audio->feedback.min_value = ((fb_param.sample_freq - 1) / frame_div) << 16; + audio->feedback.max_value = (fb_param.sample_freq / frame_div + 1) << 16; - switch(fb_param.method) - { + switch (fb_param.method) { case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: audiod_set_fb_params_freq(audio, fb_param.sample_freq, fb_param.frequency.mclk_freq); - break; + break; - case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: - { + case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: { // Initialize the threshold level to half filled uint16_t fifo_lvl_thr; -#if CFG_TUD_AUDIO_ENABLE_DECODING + #if CFG_TUD_AUDIO_ENABLE_DECODING fifo_lvl_thr = tu_fifo_depth(&audio->rx_supp_ff[0]) / 2; -#else + #else fifo_lvl_thr = tu_fifo_depth(&audio->ep_out_ff) / 2; -#endif + #endif audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_lvl_thr; - audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t)fifo_lvl_thr) << 16; + audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_lvl_thr) << 16; // Avoid 64bit division uint32_t nominal = ((fb_param.sample_freq / 100) << 16) / (frame_div / 100); audio->feedback.compute.fifo_count.nom_value = nominal; audio->feedback.compute.fifo_count.rate_const[0] = (uint16_t) ((audio->feedback.max_value - nominal) / fifo_lvl_thr); audio->feedback.compute.fifo_count.rate_const[1] = (uint16_t) ((nominal - audio->feedback.min_value) / fifo_lvl_thr); // On HS feedback is more sensitive since packet size can vary every MSOF, could cause instability - if(tud_speed_get() == TUSB_SPEED_HIGH) { + if (tud_speed_get() == TUSB_SPEED_HIGH) { audio->feedback.compute.fifo_count.rate_const[0] /= 8; audio->feedback.compute.fifo_count.rate_const[1] /= 8; } - } - break; + } break; // nothing to do - default: break; + default: + break; } } -#endif // CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +#endif// CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // We are done - abort loop break; @@ -2140,13 +2013,11 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // Disable SOF interrupt if no driver has any enabled feedback EP bool enable_sof = false; - for(uint8_t i=0; i < CFG_TUD_AUDIO; i++) - { + for (uint8_t i = 0; i < CFG_TUD_AUDIO; i++) { if (_audiod_fct[i].ep_fb != 0 && - (_audiod_fct[i].feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED || - _audiod_fct[i].feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT || - _audiod_fct[i].feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2 )) - { + (_audiod_fct[i].feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED || + _audiod_fct[i].feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT || + _audiod_fct[i].feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2)) { enable_sof = true; break; } @@ -2165,22 +2036,17 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const * // Invoked when class request DATA stage is finished. // return false to stall control EP (e.g Host send non-sense DATA) -static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const * p_request) -{ +static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const *p_request) { // Handle audio class specific set requests - if(p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.direction == TUSB_DIR_OUT) - { + if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.direction == TUSB_DIR_OUT) { uint8_t func_id; - switch (p_request->bmRequestType_bit.recipient) - { - case TUSB_REQ_RCPT_INTERFACE: - { + switch (p_request->bmRequestType_bit.recipient) { + case TUSB_REQ_RCPT_INTERFACE: { uint8_t itf = TU_U16_LOW(p_request->wIndex); uint8_t entityID = TU_U16_HIGH(p_request->wIndex); - if (entityID != 0) - { + if (entityID != 0) { // Check if entity is present and get corresponding driver index TU_VERIFY(audiod_verify_entity_exists(itf, entityID, &func_id)); @@ -2193,20 +2059,16 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const // Invoke callback return tud_audio_set_req_entity_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); - } - else - { + } else { // Find index of audio driver structure and verify interface really exists TU_VERIFY(audiod_verify_itf_exists(itf, &func_id)); // Invoke callback return tud_audio_set_req_itf_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); } - } - break; + } break; - case TUSB_REQ_RCPT_ENDPOINT: - { + case TUSB_REQ_RCPT_ENDPOINT: { uint8_t ep = TU_U16_LOW(p_request->wIndex); // Check if entity is present and get corresponding driver index @@ -2214,10 +2076,11 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const // Invoke callback return tud_audio_set_req_ep_cb(rhport, p_request, _audiod_fct[func_id].ctrl_buf); - } - break; + } break; // Unknown/Unsupported recipient - default: TU_BREAKPOINT(); return false; + default: + TU_BREAKPOINT(); + return false; } } return true; @@ -2225,15 +2088,12 @@ static bool audiod_control_complete(uint8_t rhport, tusb_control_request_t const // Handle class control request // return false to stall control endpoint (e.g unsupported request) -static bool audiod_control_request(uint8_t rhport, tusb_control_request_t const * p_request) -{ +static bool audiod_control_request(uint8_t rhport, tusb_control_request_t const *p_request) { (void) rhport; // Handle standard requests - standard set requests usually have no data stage so we also handle set requests here - if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD) - { - switch (p_request->bRequest) - { + if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD) { + switch (p_request->bRequest) { case TUSB_REQ_GET_INTERFACE: return audiod_get_interface(rhport, p_request); @@ -2244,66 +2104,59 @@ static bool audiod_control_request(uint8_t rhport, tusb_control_request_t const return true; // Unknown/Unsupported request - default: TU_BREAKPOINT(); return false; + default: + TU_BREAKPOINT(); + return false; } } // Handle class requests - if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS) - { + if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS) { uint8_t itf = TU_U16_LOW(p_request->wIndex); uint8_t func_id; // Conduct checks which depend on the recipient - switch (p_request->bmRequestType_bit.recipient) - { - case TUSB_REQ_RCPT_INTERFACE: - { + switch (p_request->bmRequestType_bit.recipient) { + case TUSB_REQ_RCPT_INTERFACE: { uint8_t entityID = TU_U16_HIGH(p_request->wIndex); // Verify if entity is present - if (entityID != 0) - { + if (entityID != 0) { // Find index of audio driver structure and verify entity really exists TU_VERIFY(audiod_verify_entity_exists(itf, entityID, &func_id)); // In case we got a get request invoke callback - callback needs to answer as defined in UAC2 specification page 89 - 5. Requests - if (p_request->bmRequestType_bit.direction == TUSB_DIR_IN) - { + if (p_request->bmRequestType_bit.direction == TUSB_DIR_IN) { return tud_audio_get_req_entity_cb(rhport, p_request); } - } - else - { + } else { // Find index of audio driver structure and verify interface really exists TU_VERIFY(audiod_verify_itf_exists(itf, &func_id)); // In case we got a get request invoke callback - callback needs to answer as defined in UAC2 specification page 89 - 5. Requests - if (p_request->bmRequestType_bit.direction == TUSB_DIR_IN) - { + if (p_request->bmRequestType_bit.direction == TUSB_DIR_IN) { return tud_audio_get_req_itf_cb(rhport, p_request); } } - } - break; + } break; - case TUSB_REQ_RCPT_ENDPOINT: - { + case TUSB_REQ_RCPT_ENDPOINT: { uint8_t ep = TU_U16_LOW(p_request->wIndex); // Find index of audio driver structure and verify EP really exists TU_VERIFY(audiod_verify_ep_exists(ep, &func_id)); // In case we got a get request invoke callback - callback needs to answer as defined in UAC2 specification page 89 - 5. Requests - if (p_request->bmRequestType_bit.direction == TUSB_DIR_IN) - { + if (p_request->bmRequestType_bit.direction == TUSB_DIR_IN) { return tud_audio_get_req_ep_cb(rhport, p_request); } - } - break; + } break; // Unknown/Unsupported recipient - default: TU_LOG2(" Unsupported recipient: %d\r\n", p_request->bmRequestType_bit.recipient); TU_BREAKPOINT(); return false; + default: + TU_LOG2(" Unsupported recipient: %d\r\n", p_request->bmRequestType_bit.recipient); + TU_BREAKPOINT(); + return false; } // If we end here, the received request is a set request - we schedule a receive for the data stage and return true here. We handle the rest later in audiod_control_complete() once the data stage was finished @@ -2316,35 +2169,28 @@ static bool audiod_control_request(uint8_t rhport, tusb_control_request_t const return false; } -bool audiod_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) -{ - if ( stage == CONTROL_STAGE_SETUP ) - { +bool audiod_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const *request) { + if (stage == CONTROL_STAGE_SETUP) { return audiod_control_request(rhport, request); - } - else if ( stage == CONTROL_STAGE_DATA ) - { + } else if (stage == CONTROL_STAGE_DATA) { return audiod_control_complete(rhport, request); } return true; } -bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) -{ +bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) result; (void) xferred_bytes; // Search for interface belonging to given end point address and proceed as required - for (uint8_t func_id = 0; func_id < CFG_TUD_AUDIO; func_id++) - { - audiod_function_t* audio = &_audiod_fct[func_id]; + for (uint8_t func_id = 0; func_id < CFG_TUD_AUDIO; func_id++) { + audiod_function_t *audio = &_audiod_fct[func_id]; #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP // Data transmission of control interrupt finished - if (audio->ep_int == ep_addr) - { + if (audio->ep_int == ep_addr) { // According to USB2 specification, maximum payload of interrupt EP is 8 bytes on low speed, 64 bytes on full speed, and 1024 bytes on high speed (but only if an alternate interface other than 0 is used - see specification p. 49) // In case there is nothing to send we have to return a NAK - this is taken care of by PHY ??? // In case of an erroneous transmission a retransmission is conducted - this is taken care of by PHY ??? @@ -2361,8 +2207,7 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 #if CFG_TUD_AUDIO_ENABLE_EP_IN // Data transmission of audio packet finished - if (audio->ep_in == ep_addr && audio->alt_setting != 0) - { + if (audio->ep_in == ep_addr && audio->alt_setting != 0) { // USB 2.0, section 5.6.4, third paragraph, states "An isochronous endpoint must specify its required bus access period. However, an isochronous endpoint must be prepared to handle poll rates faster than the one specified." // That paragraph goes on to say "An isochronous IN endpoint must return a zero-length packet whenever data is requested at a faster interval than the specified interval and data is not available." // This can only be solved reliably if we load a ZLP after every IN transmission since we can not say if the host requests samples earlier than we declared! Once all samples are collected we overwrite the loaded ZLP. @@ -2382,27 +2227,24 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 #if CFG_TUD_AUDIO_ENABLE_EP_OUT // New audio packet received - if (audio->ep_out == ep_addr) - { + if (audio->ep_out == ep_addr) { TU_VERIFY(audiod_rx_done_cb(rhport, audio, (uint16_t) xferred_bytes)); return true; } -#if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP // Transmission of feedback EP finished - if (audio->ep_fb == ep_addr) - { + if (audio->ep_fb == ep_addr) { tud_audio_fb_done_cb(func_id); // Schedule a transmit with the new value if EP is not busy - if (usbd_edpt_claim(rhport, audio->ep_fb)) - { + if (usbd_edpt_claim(rhport, audio->ep_fb)) { // Schedule next transmission - value is changed bytud_audio_n_fb_set() in the meantime or the old value gets sent return audiod_fb_send(audio); } } -#endif + #endif #endif } @@ -2411,8 +2253,7 @@ bool audiod_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint3 #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP -static bool audiod_set_fb_params_freq(audiod_function_t* audio, uint32_t sample_freq, uint32_t mclk_freq) -{ +static bool audiod_set_fb_params_freq(audiod_function_t *audio, uint32_t sample_freq, uint32_t mclk_freq) { // Check if frame interval is within sane limits // The interval value n_frames was taken from the descriptors within audiod_set_interface() @@ -2421,23 +2262,19 @@ static bool audiod_set_fb_params_freq(audiod_function_t* audio, uint32_t sample_ uint32_t const k = (TUSB_SPEED_FULL == tud_speed_get()) ? 10 : 13; uint32_t const n_frame = (1UL << audio->feedback.frame_shift); - if ( (((1UL << k) * sample_freq / mclk_freq) + 1) > n_frame ) - { - TU_LOG1(" UAC2 feedback interval too small\r\n"); TU_BREAKPOINT(); return false; + if ((((1UL << k) * sample_freq / mclk_freq) + 1) > n_frame) { + TU_LOG1(" UAC2 feedback interval too small\r\n"); + TU_BREAKPOINT(); + return false; } // Check if parameters really allow for a power of two division - if ((mclk_freq % sample_freq) == 0 && tu_is_power_of_two(mclk_freq / sample_freq)) - { - audio->feedback.compute_method = AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2; + if ((mclk_freq % sample_freq) == 0 && tu_is_power_of_two(mclk_freq / sample_freq)) { + audio->feedback.compute_method = AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2; audio->feedback.compute.power_of_2 = (uint8_t) (16 - (audio->feedback.frame_shift - 1) - tu_log2(mclk_freq / sample_freq)); - } - else if ( audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT) - { - audio->feedback.compute.float_const = (float)sample_freq / (float) mclk_freq * (1UL << (16 - (audio->feedback.frame_shift - 1))); - } - else - { + } else if (audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT) { + audio->feedback.compute.float_const = (float) sample_freq / (float) mclk_freq * (1UL << (16 - (audio->feedback.frame_shift - 1))); + } else { audio->feedback.compute.fixed.sample_freq = sample_freq; audio->feedback.compute.fixed.mclk_freq = mclk_freq; } @@ -2445,84 +2282,75 @@ static bool audiod_set_fb_params_freq(audiod_function_t* audio, uint32_t sample_ return true; } -static void audiod_fb_fifo_count_update(audiod_function_t* audio, uint16_t lvl_new) -{ +static void audiod_fb_fifo_count_update(audiod_function_t *audio, uint16_t lvl_new) { /* Low-pass (averaging) filter */ uint32_t lvl = audio->feedback.compute.fifo_count.fifo_lvl_avg; - lvl = (uint32_t)(((uint64_t)lvl * 63 + ((uint32_t)lvl_new << 16)) >> 6); + lvl = (uint32_t) (((uint64_t) lvl * 63 + ((uint32_t) lvl_new << 16)) >> 6); audio->feedback.compute.fifo_count.fifo_lvl_avg = lvl; uint32_t const ff_lvl = lvl >> 16; uint16_t const ff_thr = audio->feedback.compute.fifo_count.fifo_lvl_thr; - uint16_t const *rate = audio->feedback.compute.fifo_count.rate_const; + uint16_t const *rate = audio->feedback.compute.fifo_count.rate_const; uint32_t feedback; - if(ff_lvl < ff_thr) - { + if (ff_lvl < ff_thr) { feedback = audio->feedback.compute.fifo_count.nom_value + (ff_thr - ff_lvl) * rate[0]; - } else - { + } else { feedback = audio->feedback.compute.fifo_count.nom_value - (ff_lvl - ff_thr) * rate[1]; } - if ( feedback > audio->feedback.max_value ) feedback = audio->feedback.max_value; - if ( feedback < audio->feedback.min_value ) feedback = audio->feedback.min_value; + if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; + if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; audio->feedback.value = feedback; // Schedule a transmit with the new value if EP is not busy - this triggers repetitive scheduling of the feedback value - if (usbd_edpt_claim(audio->rhport, audio->ep_fb)) - { + if (usbd_edpt_claim(audio->rhport, audio->ep_fb)) { audiod_fb_send(audio); } } -uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) -{ - audiod_function_t* audio = &_audiod_fct[func_id]; +uint32_t tud_audio_feedback_update(uint8_t func_id, uint32_t cycles) { + audiod_function_t *audio = &_audiod_fct[func_id]; uint32_t feedback; - switch (audio->feedback.compute_method) - { + switch (audio->feedback.compute_method) { case AUDIO_FEEDBACK_METHOD_FREQUENCY_POWER_OF_2: feedback = (cycles << audio->feedback.compute.power_of_2); - break; + break; case AUDIO_FEEDBACK_METHOD_FREQUENCY_FLOAT: feedback = (uint32_t) ((float) cycles * audio->feedback.compute.float_const); - break; + break; - case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: - { + case AUDIO_FEEDBACK_METHOD_FREQUENCY_FIXED: { uint64_t fb64 = (((uint64_t) cycles) * audio->feedback.compute.fixed.sample_freq) << (16 - (audio->feedback.frame_shift - 1)); feedback = (uint32_t) (fb64 / audio->feedback.compute.fixed.mclk_freq); - } - break; + } break; - default: return 0; + default: + return 0; } // For Windows: https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers // The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. // This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot // (audio slot = channel count samples). - if ( feedback > audio->feedback.max_value ) feedback = audio->feedback.max_value; - if ( feedback < audio->feedback.min_value ) feedback = audio->feedback.min_value; + if (feedback > audio->feedback.max_value) feedback = audio->feedback.max_value; + if (feedback < audio->feedback.min_value) feedback = audio->feedback.min_value; tud_audio_n_fb_set(func_id, feedback); return feedback; } -bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) -{ +bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); _audiod_fct[func_id].feedback.value = feedback; // Schedule a transmit with the new value if EP is not busy - this triggers repetitive scheduling of the feedback value - if (usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_fb)) - { + if (usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_fb)) { return audiod_fb_send(&_audiod_fct[func_id]); } @@ -2530,8 +2358,7 @@ bool tud_audio_n_fb_set(uint8_t func_id, uint32_t feedback) } #endif -TU_ATTR_FAST_FUNC void audiod_sof_isr (uint8_t rhport, uint32_t frame_count) -{ +TU_ATTR_FAST_FUNC void audiod_sof_isr(uint8_t rhport, uint32_t frame_count) { (void) rhport; (void) frame_count; @@ -2543,26 +2370,22 @@ TU_ATTR_FAST_FUNC void audiod_sof_isr (uint8_t rhport, uint32_t frame_count) // feedback = n_cycles / n_frames * f_s / f_m in 16.16 format, where n_cycles are the number of main clock cycles within fb_n_frames // Iterate over audio functions and set feedback value - for(uint8_t i=0; i < CFG_TUD_AUDIO; i++) - { - audiod_function_t* audio = &_audiod_fct[i]; + for (uint8_t i = 0; i < CFG_TUD_AUDIO; i++) { + audiod_function_t *audio = &_audiod_fct[i]; - if (audio->ep_fb != 0) - { + if (audio->ep_fb != 0) { // HS shift need to be adjusted since SOF event is generated for frame only uint8_t const hs_adjust = (TUSB_SPEED_HIGH == tud_speed_get()) ? 3 : 0; uint32_t const interval = 1UL << (audio->feedback.frame_shift - hs_adjust); - if ( 0 == (frame_count & (interval-1)) ) - { + if (0 == (frame_count & (interval - 1))) { tud_audio_feedback_interval_isr(i, frame_count, audio->feedback.frame_shift); } } } -#endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP } -bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_request_t const * p_request, void* data, uint16_t len) -{ +bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_request_t const *p_request, void *data, uint16_t len) { // Handles only sending of data not receiving if (p_request->bmRequestType_bit.direction == TUSB_DIR_OUT) return false; @@ -2571,85 +2394,73 @@ bool tud_audio_buffer_and_schedule_control_xfer(uint8_t rhport, tusb_control_req uint8_t itf = TU_U16_LOW(p_request->wIndex); // Conduct checks which depend on the recipient - switch (p_request->bmRequestType_bit.recipient) - { - case TUSB_REQ_RCPT_INTERFACE: - { + switch (p_request->bmRequestType_bit.recipient) { + case TUSB_REQ_RCPT_INTERFACE: { uint8_t entityID = TU_U16_HIGH(p_request->wIndex); // Verify if entity is present - if (entityID != 0) - { + if (entityID != 0) { // Find index of audio driver structure and verify entity really exists TU_VERIFY(audiod_verify_entity_exists(itf, entityID, &func_id)); - } - else - { + } else { // Find index of audio driver structure and verify interface really exists TU_VERIFY(audiod_verify_itf_exists(itf, &func_id)); } - } - break; + } break; - case TUSB_REQ_RCPT_ENDPOINT: - { + case TUSB_REQ_RCPT_ENDPOINT: { uint8_t ep = TU_U16_LOW(p_request->wIndex); // Find index of audio driver structure and verify EP really exists TU_VERIFY(audiod_verify_ep_exists(ep, &func_id)); - } - break; + } break; // Unknown/Unsupported recipient - default: TU_LOG2(" Unsupported recipient: %d\r\n", p_request->bmRequestType_bit.recipient); TU_BREAKPOINT(); return false; + default: + TU_LOG2(" Unsupported recipient: %d\r\n", p_request->bmRequestType_bit.recipient); + TU_BREAKPOINT(); + return false; } // Crop length if (len > _audiod_fct[func_id].ctrl_buf_sz) len = _audiod_fct[func_id].ctrl_buf_sz; // Copy into buffer - TU_VERIFY(0 == tu_memcpy_s(_audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz, data, (size_t)len)); + TU_VERIFY(0 == tu_memcpy_s(_audiod_fct[func_id].ctrl_buf, _audiod_fct[func_id].ctrl_buf_sz, data, (size_t) len)); #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL // Find data for sampling_frequency_control - if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) - { + if (p_request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS && p_request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE) { uint8_t entityID = TU_U16_HIGH(p_request->wIndex); uint8_t ctrlSel = TU_U16_HIGH(p_request->wValue); - if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO_CS_REQ_CUR) - { + if (_audiod_fct[func_id].bclock_id_tx == entityID && ctrlSel == AUDIO_CS_CTRL_SAM_FREQ && p_request->bRequest == AUDIO_CS_REQ_CUR) { _audiod_fct[func_id].sample_rate_tx = tu_unaligned_read32(_audiod_fct[func_id].ctrl_buf); } } #endif // Schedule transmit - return tud_control_xfer(rhport, p_request, (void*)_audiod_fct[func_id].ctrl_buf, len); + return tud_control_xfer(rhport, p_request, (void *) _audiod_fct[func_id].ctrl_buf, len); } // This helper function finds for a given audio function and AS interface number the index of the attached driver structure, the index of the interface in the audio function // (e.g. the std. AS interface with interface number 15 is the first AS interface for the given audio function and thus gets index zero), and // finally a pointer to the std. AS interface, where the pointer always points to the first alternate setting i.e. alternate interface zero. -static bool audiod_get_AS_interface_index(uint8_t itf, audiod_function_t * audio, uint8_t *idxItf, uint8_t const **pp_desc_int) -{ - if (audio->p_desc) - { +static bool audiod_get_AS_interface_index(uint8_t itf, audiod_function_t *audio, uint8_t *idxItf, uint8_t const **pp_desc_int) { + if (audio->p_desc) { // Get pointer at end uint8_t const *p_desc_end = audio->p_desc + audio->desc_length - TUD_AUDIO_DESC_IAD_LEN; // Advance past AC descriptors uint8_t const *p_desc = tu_desc_next(audio->p_desc); - p_desc += ((audio_desc_cs_ac_interface_t const *)p_desc)->wTotalLength; + p_desc += ((audio_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; uint8_t tmp = 0; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { + while (p_desc_end - p_desc > 0) { // We assume the number of alternate settings is increasing thus we return the index of alternate setting zero! - if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const * )p_desc)->bAlternateSetting == 0) - { - if (((tusb_desc_interface_t const * )p_desc)->bInterfaceNumber == itf) - { + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == 0) { + if (((tusb_desc_interface_t const *) p_desc)->bInterfaceNumber == itf) { *idxItf = tmp; *pp_desc_int = p_desc; return true; @@ -2666,14 +2477,11 @@ static bool audiod_get_AS_interface_index(uint8_t itf, audiod_function_t * audio // This helper function finds for a given AS interface number the index of the attached driver structure, the index of the interface in the audio function // (e.g. the std. AS interface with interface number 15 is the first AS interface for the given audio function and thus gets index zero), and // finally a pointer to the std. AS interface, where the pointer always points to the first alternate setting i.e. alternate interface zero. -static bool audiod_get_AS_interface_index_global(uint8_t itf, uint8_t *func_id, uint8_t *idxItf, uint8_t const **pp_desc_int) -{ +static bool audiod_get_AS_interface_index_global(uint8_t itf, uint8_t *func_id, uint8_t *idxItf, uint8_t const **pp_desc_int) { // Loop over audio driver interfaces uint8_t i; - for (i = 0; i < CFG_TUD_AUDIO; i++) - { - if (audiod_get_AS_interface_index(itf, &_audiod_fct[i], idxItf, pp_desc_int)) - { + for (i = 0; i < CFG_TUD_AUDIO; i++) { + if (audiod_get_AS_interface_index(itf, &_audiod_fct[i], idxItf, pp_desc_int)) { *func_id = i; return true; } @@ -2683,23 +2491,19 @@ static bool audiod_get_AS_interface_index_global(uint8_t itf, uint8_t *func_id, } // Verify an entity with the given ID exists and returns also the corresponding driver index -static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t *func_id) -{ +static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t *func_id) { uint8_t i; - for (i = 0; i < CFG_TUD_AUDIO; i++) - { + for (i = 0; i < CFG_TUD_AUDIO; i++) { // Look for the correct driver by checking if the unique standard AC interface number fits - if (_audiod_fct[i].p_desc && ((tusb_desc_interface_t const *)_audiod_fct[i].p_desc)->bInterfaceNumber == itf) - { + if (_audiod_fct[i].p_desc && ((tusb_desc_interface_t const *) _audiod_fct[i].p_desc)->bInterfaceNumber == itf) { // Get pointers after class specific AC descriptors and end of AC descriptors - entities are defined in between - uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc); // Points to CS AC descriptor - uint8_t const *p_desc_end = ((audio_desc_cs_ac_interface_t const *)p_desc)->wTotalLength + p_desc; - p_desc = tu_desc_next(p_desc); // Get past CS AC descriptor + uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc);// Points to CS AC descriptor + uint8_t const *p_desc_end = ((audio_desc_cs_ac_interface_t const *) p_desc)->wTotalLength + p_desc; + p_desc = tu_desc_next(p_desc);// Get past CS AC descriptor // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { - if (p_desc[3] == entityID) // Entity IDs are always at offset 3 + while (p_desc_end - p_desc > 0) { + if (p_desc[3] == entityID)// Entity IDs are always at offset 3 { *func_id = i; return true; @@ -2711,21 +2515,16 @@ static bool audiod_verify_entity_exists(uint8_t itf, uint8_t entityID, uint8_t * return false; } -static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id) -{ +static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id) { uint8_t i; - for (i = 0; i < CFG_TUD_AUDIO; i++) - { - if (_audiod_fct[i].p_desc) - { + for (i = 0; i < CFG_TUD_AUDIO; i++) { + if (_audiod_fct[i].p_desc) { // Get pointer at beginning and end uint8_t const *p_desc = _audiod_fct[i].p_desc; uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length - TUD_AUDIO_DESC_IAD_LEN; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { - if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *)_audiod_fct[i].p_desc)->bInterfaceNumber == itf) - { + while (p_desc_end - p_desc > 0) { + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) _audiod_fct[i].p_desc)->bInterfaceNumber == itf) { *func_id = i; return true; } @@ -2736,25 +2535,20 @@ static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id) return false; } -static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) -{ +static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) { uint8_t i; - for (i = 0; i < CFG_TUD_AUDIO; i++) - { - if (_audiod_fct[i].p_desc) - { + for (i = 0; i < CFG_TUD_AUDIO; i++) { + if (_audiod_fct[i].p_desc) { // Get pointer at end uint8_t const *p_desc_end = _audiod_fct[i].p_desc + _audiod_fct[i].desc_length; // Advance past AC descriptors - EP we look for are streaming EPs uint8_t const *p_desc = tu_desc_next(_audiod_fct[i].p_desc); - p_desc += ((audio_desc_cs_ac_interface_t const *)p_desc)->wTotalLength; + p_desc += ((audio_desc_cs_ac_interface_t const *) p_desc)->wTotalLength; // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { - if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT && ((tusb_desc_endpoint_t const * )p_desc)->bEndpointAddress == ep) - { + while (p_desc_end - p_desc > 0) { + if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT && ((tusb_desc_endpoint_t const *) p_desc)->bEndpointAddress == ep) { *func_id = i; return true; } @@ -2769,81 +2563,73 @@ static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) // p_desc points to the AS interface of alternate setting zero // itf is the interface number of the corresponding interface - we check if the interface belongs to EP in or EP out to see if it is a TX or RX parameter // Currently, only AS interfaces with an EP (in or out) are supposed to be parsed for! -static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * p_desc, uint8_t const * p_desc_end, uint8_t const as_itf) -{ -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_in_as_intf_num && as_itf != audio->ep_out_as_intf_num) return; // Abort, this interface has no EP, this driver does not support this currently -#endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_EP_OUT +static void audiod_parse_for_AS_params(audiod_function_t *audio, uint8_t const *p_desc, uint8_t const *p_desc_end, uint8_t const as_itf) { + #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT + if (as_itf != audio->ep_in_as_intf_num && as_itf != audio->ep_out_as_intf_num) return;// Abort, this interface has no EP, this driver does not support this currently + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_EP_OUT if (as_itf != audio->ep_in_as_intf_num) return; -#endif -#if !CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT + #endif + #if !CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT if (as_itf != audio->ep_out_as_intf_num) return; -#endif + #endif - p_desc = tu_desc_next(p_desc); // Exclude standard AS interface descriptor of current alternate interface descriptor + p_desc = tu_desc_next(p_desc);// Exclude standard AS interface descriptor of current alternate interface descriptor // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) - { + while (p_desc_end - p_desc > 0) { // Abort if follow up descriptor is a new standard interface descriptor - indicates the last AS descriptor was already finished if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) break; // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_AS_GENERAL) - { -#if CFG_TUD_AUDIO_ENABLE_EP_IN - if (as_itf == audio->ep_in_as_intf_num) - { - audio->n_channels_tx = ((audio_desc_cs_as_interface_t const * )p_desc)->bNrChannels; - audio->format_type_tx = (audio_format_type_t)(((audio_desc_cs_as_interface_t const * )p_desc)->bFormatType); + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_AS_GENERAL) { + #if CFG_TUD_AUDIO_ENABLE_EP_IN + if (as_itf == audio->ep_in_as_intf_num) { + audio->n_channels_tx = ((audio_desc_cs_as_interface_t const *) p_desc)->bNrChannels; + audio->format_type_tx = (audio_format_type_t) (((audio_desc_cs_as_interface_t const *) p_desc)->bFormatType); -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - audio->format_type_I_tx = (audio_data_format_type_I_t)(((audio_desc_cs_as_interface_t const * )p_desc)->bmFormats); -#endif + #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING + audio->format_type_I_tx = (audio_data_format_type_I_t) (((audio_desc_cs_as_interface_t const *) p_desc)->bmFormats); + #endif } -#endif + #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - if (as_itf == audio->ep_out_as_intf_num) - { - audio->n_channels_rx = ((audio_desc_cs_as_interface_t const * )p_desc)->bNrChannels; - audio->format_type_rx = ((audio_desc_cs_as_interface_t const * )p_desc)->bFormatType; -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - audio->format_type_I_rx = ((audio_desc_cs_as_interface_t const * )p_desc)->bmFormats; -#endif + #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING + if (as_itf == audio->ep_out_as_intf_num) { + audio->n_channels_rx = ((audio_desc_cs_as_interface_t const *) p_desc)->bNrChannels; + audio->format_type_rx = ((audio_desc_cs_as_interface_t const *) p_desc)->bFormatType; + #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING + audio->format_type_I_rx = ((audio_desc_cs_as_interface_t const *) p_desc)->bmFormats; + #endif } -#endif + #endif } // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_FORMAT_TYPE && ((audio_desc_type_I_format_t const * )p_desc)->bFormatType == AUDIO_FORMAT_TYPE_I) - { -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_in_as_intf_num && as_itf != audio->ep_out_as_intf_num) break; // Abort loop, this interface has no EP, this driver does not support this currently -#endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_EP_OUT + #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_FORMAT_TYPE && ((audio_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO_FORMAT_TYPE_I) { + #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT + if (as_itf != audio->ep_in_as_intf_num && as_itf != audio->ep_out_as_intf_num) break;// Abort loop, this interface has no EP, this driver does not support this currently + #endif + #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_EP_OUT if (as_itf != audio->ep_in_as_intf_num) break; -#endif -#if !CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT + #endif + #if !CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT if (as_itf != audio->ep_out_as_intf_num) break; -#endif + #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN - if (as_itf == audio->ep_in_as_intf_num) - { - audio->n_bytes_per_sample_tx = ((audio_desc_type_I_format_t const * )p_desc)->bSubslotSize; + #if CFG_TUD_AUDIO_ENABLE_EP_IN + if (as_itf == audio->ep_in_as_intf_num) { + audio->n_bytes_per_sample_tx = ((audio_desc_type_I_format_t const *) p_desc)->bSubslotSize; } -#endif + #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - if (as_itf == audio->ep_out_as_intf_num) - { - audio->n_bytes_per_sample_rx = ((audio_desc_type_I_format_t const * )p_desc)->bSubslotSize; + #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING + if (as_itf == audio->ep_out_as_intf_num) { + audio->n_bytes_per_sample_rx = ((audio_desc_type_I_format_t const *) p_desc)->bSubslotSize; } -#endif + #endif } -#endif + #endif // Other format types are not supported yet @@ -2854,8 +2640,7 @@ static void audiod_parse_for_AS_params(audiod_function_t* audio, uint8_t const * #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL -static bool audiod_calc_tx_packet_sz(audiod_function_t* audio) -{ +static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { TU_VERIFY(audio->format_type_tx == AUDIO_FORMAT_TYPE_I); TU_VERIFY(audio->n_channels_tx); TU_VERIFY(audio->n_bytes_per_sample_tx); @@ -2864,25 +2649,23 @@ static bool audiod_calc_tx_packet_sz(audiod_function_t* audio) const uint8_t interval = (tud_speed_get() == TUSB_SPEED_FULL) ? audio->interval_tx : 1 << (audio->interval_tx - 1); - const uint16_t sample_normimal = (uint16_t)(audio->sample_rate_tx * interval / ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000)); - const uint16_t sample_reminder = (uint16_t)(audio->sample_rate_tx * interval % ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000)); + const uint16_t sample_normimal = (uint16_t) (audio->sample_rate_tx * interval / ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000)); + const uint16_t sample_reminder = (uint16_t) (audio->sample_rate_tx * interval % ((tud_speed_get() == TUSB_SPEED_FULL) ? 1000 : 8000)); - const uint16_t packet_sz_tx_min = (uint16_t)((sample_normimal - 1) * audio->n_channels_tx * audio->n_bytes_per_sample_tx); - const uint16_t packet_sz_tx_norm = (uint16_t)(sample_normimal * audio->n_channels_tx * audio->n_bytes_per_sample_tx); - const uint16_t packet_sz_tx_max = (uint16_t)((sample_normimal + 1) * audio->n_channels_tx * audio->n_bytes_per_sample_tx); + const uint16_t packet_sz_tx_min = (uint16_t) ((sample_normimal - 1) * audio->n_channels_tx * audio->n_bytes_per_sample_tx); + const uint16_t packet_sz_tx_norm = (uint16_t) (sample_normimal * audio->n_channels_tx * audio->n_bytes_per_sample_tx); + const uint16_t packet_sz_tx_max = (uint16_t) ((sample_normimal + 1) * audio->n_channels_tx * audio->n_bytes_per_sample_tx); // Endpoint size must larger than packet size TU_ASSERT(packet_sz_tx_max <= audio->ep_in_sz); // Frmt20.pdf 2.3.1.1 USB Packets - if (sample_reminder) - { + if (sample_reminder) { // All virtual frame packets must either contain INT(nav) audio slots (small VFP) or INT(nav)+1 (large VFP) audio slots audio->packet_sz_tx[0] = packet_sz_tx_norm; audio->packet_sz_tx[1] = packet_sz_tx_norm; audio->packet_sz_tx[2] = packet_sz_tx_max; - } else - { + } else { // In the case where nav = INT(nav), ni may vary between INT(nav)-1 (small VFP), INT(nav) // (medium VFP) and INT(nav)+1 (large VFP). audio->packet_sz_tx[0] = packet_sz_tx_min; @@ -2893,49 +2676,37 @@ static bool audiod_calc_tx_packet_sz(audiod_function_t* audio) return true; } -static uint16_t audiod_tx_packet_size(const uint16_t* norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_depth) -{ +static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_depth) { // Flow control need a FIFO size of at least 4*Navg - if(norminal_size[1] && norminal_size[1] <= fifo_depth * 4) - { + if (norminal_size[1] && norminal_size[1] <= fifo_depth * 4) { // Use blackout to prioritize normal size packet static int ctrl_blackout = 0; uint16_t packet_size; uint16_t slot_size = norminal_size[2] - norminal_size[1]; - if (data_count < norminal_size[0]) - { - // If you get here frequently, then your I2S clock deviation is too big ! - packet_size = 0; - } else - if (data_count < fifo_depth / 2 - slot_size && !ctrl_blackout) - { + if (data_count < norminal_size[0]) { + // If you get here frequently, then your I2S clock deviation is too big ! + packet_size = 0; + } else if (data_count < fifo_depth / 2 - slot_size && !ctrl_blackout) { packet_size = norminal_size[0]; ctrl_blackout = 10; - } else - if (data_count > fifo_depth / 2 + slot_size && !ctrl_blackout) - { + } else if (data_count > fifo_depth / 2 + slot_size && !ctrl_blackout) { packet_size = norminal_size[2]; - if(norminal_size[0] == norminal_size[1]) - { + if (norminal_size[0] == norminal_size[1]) { // nav > INT(nav), eg. 44.1k, 88.2k ctrl_blackout = 0; - } else - { + } else { // nav = INT(nav), eg. 48k, 96k ctrl_blackout = 10; } - } else - { + } else { packet_size = norminal_size[1]; - if (ctrl_blackout) - { + if (ctrl_blackout) { ctrl_blackout--; } } // Normally this cap is not necessary return tu_min16(packet_size, max_depth); - } else - { + } else { return tu_min16(data_count, max_depth); } } @@ -2943,13 +2714,11 @@ static uint16_t audiod_tx_packet_size(const uint16_t* norminal_size, uint16_t da #endif // No security checks here - internal function only which should always succeed -static uint8_t audiod_get_audio_fct_idx(audiod_function_t * audio) -{ - for (uint8_t cnt=0; cnt < CFG_TUD_AUDIO; cnt++) - { +static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio) { + for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO; cnt++) { if (&_audiod_fct[cnt] == audio) return cnt; } return 0; } -#endif //CFG_TUD_ENABLED && CFG_TUD_AUDIO +#endif // (CFG_TUD_ENABLED && CFG_TUD_AUDIO) -- cgit v1.3.1 From 71e046d9ffb6e388052b02f8230de51bfeb5b0ed Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 23 Feb 2025 22:21:55 +0700 Subject: add tuh_midi_descriptor_cb() --- src/class/audio/audio.h | 1 + src/class/audio/audio_device.c | 4 - src/class/midi/midi.h | 21 ----- src/class/midi/midi_host.c | 179 +++++++++++++++++++---------------------- src/class/midi/midi_host.h | 14 +++- src/common/tusb_types.h | 14 +++- src/tusb.c | 12 ++- 7 files changed, 115 insertions(+), 130 deletions(-) (limited to 'src/class/audio') diff --git a/src/class/audio/audio.h b/src/class/audio/audio.h index 2f97c0f23..0d1acadcc 100644 --- a/src/class/audio/audio.h +++ b/src/class/audio/audio.h @@ -661,6 +661,7 @@ typedef struct TU_ATTR_PACKED uint16_t wTotalLength ; ///< Total number of bytes returned for the class-specific AudioControl interface descriptor. Includes the combined length of this descriptor header and all Clock Source, Unit and Terminal descriptors. uint8_t bmControls ; ///< See: audio_cs_ac_interface_control_pos_t. } audio_desc_cs_ac_interface_t; +TU_VERIFY_STATIC(sizeof(audio_desc_cs_ac_interface_t) == 9, "size is not correct"); /// AUDIO Clock Source Descriptor (4.7.2.1) typedef struct TU_ATTR_PACKED diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 8a130b7e2..388168424 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -628,10 +628,6 @@ static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); #if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) static void audiod_parse_for_AS_params(audiod_function_t *audio, uint8_t const *p_desc, uint8_t const *p_desc_end, uint8_t const as_itf); - -static inline uint8_t tu_desc_subtype(void const *desc) { - return ((uint8_t const *) desc)[2]; -} #endif #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL diff --git a/src/class/midi/midi.h b/src/class/midi/midi.h index a7da98831..cd67640e4 100644 --- a/src/class/midi/midi.h +++ b/src/class/midi/midi.h @@ -150,27 +150,6 @@ typedef midi_desc_out_jack_n_t(1) midi_desc_out_jack_1in_t; // 1 input typedef midi_desc_out_jack_1in_t midi_desc_out_jack_t; // backward compatible TU_VERIFY_STATIC(sizeof(midi_desc_out_jack_1in_t) == 7 + 2 * 1, "size is not correct"); -/// MIDI Element Descriptor -typedef struct TU_ATTR_PACKED { - uint8_t bLength ; ///< Size of this descriptor in bytes. - uint8_t bDescriptorType ; ///< Descriptor Type, must be Class-Specific - uint8_t bDescriptorSubType ; ///< Descriptor SubType - uint8_t bElementID; - - uint8_t bNrInputPins; - uint8_t baSourceID; - uint8_t baSourcePin; - - uint8_t bNrOutputPins; - uint8_t bInTerminalLink; - uint8_t bOutTerminalLink; - uint8_t bElCapsSize; - - uint16_t bmElementCaps; - uint8_t iElement; -} midi_desc_element_t; -TU_VERIFY_STATIC(sizeof(midi_desc_element_t) == 14, "size is not correct"); - /// MIDI Element Descriptor with multiple pins #define midi_desc_element_n_t(input_num) \ struct TU_ATTR_PACKED { \ diff --git a/src/class/midi/midi_host.c b/src/class/midi/midi_host.c index 810c413e3..2fdf41b9d 100644 --- a/src/class/midi/midi_host.c +++ b/src/class/midi/midi_host.c @@ -194,123 +194,108 @@ bool midih_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *d midih_interface_t *p_midi = find_new_midi(); TU_VERIFY(p_midi != NULL); - TU_VERIFY(TUSB_CLASS_AUDIO == desc_itf->bInterfaceClass); - // There can be just a MIDI interface or an audio and a MIDI interface. Only open the MIDI interface + + // There can be just a MIDI or an Audio + MIDI interface + // const uint8_t* p_start = ((uint8_t const*) desc_itf); + const uint8_t* p_end = ((uint8_t const*) desc_itf) + max_len; uint8_t const *p_desc = (uint8_t const *) desc_itf; uint16_t len_parsed = 0; + + tuh_midi_descriptor_cb_t desc_cb = { 0 }; + desc_cb.jack_num = 0; + + // If there is Audio Control Interface + Audio Header descriptor, skip it if (AUDIO_SUBCLASS_CONTROL == desc_itf->bInterfaceSubClass) { - // This driver does not support audio streaming. However, if this is the audio control interface - // there might be a MIDI interface following it. Search through every descriptor until a MIDI - // interface is found or the end of the descriptor is found - while (len_parsed < max_len && - (desc_itf->bInterfaceClass != TUSB_CLASS_AUDIO || desc_itf->bInterfaceSubClass != AUDIO_SUBCLASS_MIDI_STREAMING)) { - len_parsed += desc_itf->bLength; - p_desc = tu_desc_next(p_desc); - desc_itf = (tusb_desc_interface_t const *)p_desc; - } + TU_VERIFY(max_len > 2*sizeof(tusb_desc_interface_t) + sizeof(audio_desc_cs_ac_interface_t)); + p_desc = tu_desc_next(p_desc); + TU_VERIFY(tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && + tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_HEADER); + + p_desc = tu_desc_next(p_desc); + desc_itf = (tusb_desc_interface_t const *)p_desc; TU_VERIFY(TUSB_CLASS_AUDIO == desc_itf->bInterfaceClass); } TU_VERIFY(AUDIO_SUBCLASS_MIDI_STREAMING == desc_itf->bInterfaceSubClass); + desc_cb.desc_interface = desc_itf; + len_parsed += desc_itf->bLength; TU_LOG_DRV("MIDI opening Interface %u (addr = %u)\r\n", desc_itf->bInterfaceNumber, dev_addr); p_midi->itf_num = desc_itf->bInterfaceNumber; - - // CS Header descriptor p_desc = tu_desc_next(p_desc); - midi_desc_header_t const *p_mdh = (midi_desc_header_t const *) p_desc; - TU_VERIFY(p_mdh->bDescriptorType == TUSB_DESC_CS_INTERFACE && - p_mdh->bDescriptorSubType == MIDI_CS_INTERFACE_HEADER); - TU_LOG_DRV(" Interface Header descriptor\r\n"); - - // p_desc = tu_desc_next(p_desc); - uint8_t prev_ep_addr = 0; // the CS endpoint descriptor is associated with the previous endpoint descriptor - tusb_desc_endpoint_t const* in_desc = NULL; - tusb_desc_endpoint_t const* out_desc = NULL; - while (len_parsed < max_len) { - TU_VERIFY((p_mdh->bDescriptorType == TUSB_DESC_CS_INTERFACE) || - (p_mdh->bDescriptorType == TUSB_DESC_CS_ENDPOINT && p_mdh->bDescriptorSubType == MIDI_CS_ENDPOINT_GENERAL) || - p_mdh->bDescriptorType == TUSB_DESC_ENDPOINT); - - if (p_mdh->bDescriptorType == TUSB_DESC_CS_INTERFACE) { - // The USB host doesn't really need this information unless it uses - // the string descriptor for a jack or Element - - // assume it is an input jack - midi_desc_in_jack_t const *p_mdij = (midi_desc_in_jack_t const *) p_desc; - if (p_mdij->bDescriptorSubType == MIDI_CS_INTERFACE_HEADER) { - TU_LOG_DRV(" Interface Header descriptor\r\n"); - } else if (p_mdij->bDescriptorSubType == MIDI_CS_INTERFACE_IN_JACK) { - // Then it is an in jack. - TU_LOG_DRV(" IN Jack %s descriptor \r\n", p_mdij->bJackType == MIDI_JACK_EXTERNAL ? "External" : "Embedded"); - } else if (p_mdij->bDescriptorSubType == MIDI_CS_INTERFACE_OUT_JACK) { - // then it is an out jack - TU_LOG_DRV(" OUT Jack %s descriptor\r\n", p_mdij->bJackType == MIDI_JACK_EXTERNAL ? "External" : "Embedded"); - } else if (p_mdij->bDescriptorSubType == MIDI_CS_INTERFACE_ELEMENT) { - // the it is an element; - TU_LOG_DRV("Found element\r\n"); - } else { - TU_LOG_DRV(" Unknown CS Interface sub-type %u\r\n", p_mdij->bDescriptorSubType); - TU_VERIFY(false);// unknown CS Interface sub-type - } - len_parsed += p_mdij->bLength; - } else if (p_mdh->bDescriptorType == TUSB_DESC_CS_ENDPOINT) { - TU_LOG_DRV(" CS_ENDPOINT descriptor\r\n"); - TU_VERIFY(prev_ep_addr != 0); - // parse out the mapping between the device's embedded jacks and the endpoints - // Each embedded IN jack is associated with an OUT endpoint - midi_desc_cs_endpoint_t const *p_csep = (midi_desc_cs_endpoint_t const *) p_mdh; - if (tu_edpt_dir(prev_ep_addr) == TUSB_DIR_OUT) { - TU_VERIFY(p_midi->ep_out == prev_ep_addr); - TU_VERIFY(p_midi->num_cables_tx == 0); - p_midi->num_cables_tx = p_csep->bNumEmbMIDIJack; - } else { - TU_VERIFY(p_midi->ep_in == prev_ep_addr); - TU_VERIFY(p_midi->num_cables_rx == 0); - p_midi->num_cables_rx = p_csep->bNumEmbMIDIJack; - } - len_parsed += p_csep->bLength; - prev_ep_addr = 0; - } else if (p_mdh->bDescriptorType == TUSB_DESC_ENDPOINT) { - // parse out the bulk endpoint info - tusb_desc_endpoint_t const *p_ep = (tusb_desc_endpoint_t const *) p_mdh; - TU_LOG_DRV(" Endpoint descriptor %02x\r\n", p_ep->bEndpointAddress); - if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_OUT) { - TU_VERIFY(p_midi->ep_out == 0); - TU_VERIFY(p_midi->num_cables_tx == 0); - p_midi->ep_out = p_ep->bEndpointAddress; - prev_ep_addr = p_midi->ep_out; - out_desc = p_ep; - } else { - TU_VERIFY(p_midi->ep_in == 0); - TU_VERIFY(p_midi->num_cables_rx == 0); - p_midi->ep_in = p_ep->bEndpointAddress; - prev_ep_addr = p_midi->ep_in; - in_desc = p_ep; + + bool found_new_interface = false; + while ((p_desc < p_end) && (tu_desc_next(p_desc) <= p_end) && !found_new_interface) { + switch (tu_desc_type(p_desc)) { + case TUSB_DESC_INTERFACE: + found_new_interface = true; + break; + + case TUSB_DESC_CS_INTERFACE: + switch (tu_desc_subtype(p_desc)) { + case MIDI_CS_INTERFACE_HEADER: + TU_LOG_DRV(" Interface Header descriptor\r\n"); + desc_cb.desc_header = p_desc; + break; + + case MIDI_CS_INTERFACE_IN_JACK: + case MIDI_CS_INTERFACE_OUT_JACK: { + TU_LOG_DRV(" Jack %s %s descriptor \r\n", + tu_desc_subtype(p_desc) == MIDI_CS_INTERFACE_IN_JACK ? "IN" : "OUT", + p_desc[3] == MIDI_JACK_EXTERNAL ? "External" : "Embedded"); + desc_cb.desc_jack[desc_cb.jack_num++] = p_desc; + break; + } + + case MIDI_CS_INTERFACE_ELEMENT: + TU_LOG_DRV(" Element descriptor\r\n"); + desc_cb.desc_element = p_desc; + break; + + default: + TU_LOG_DRV(" Unknown CS Interface sub-type %u\r\n", tu_desc_subtype(p_desc)); + break; + } + break; + + case TUSB_DESC_ENDPOINT: { + tusb_desc_endpoint_t const *p_ep = (tusb_desc_endpoint_t const *) p_desc; + p_desc = tu_desc_next(p_desc); // next to CS endpoint + TU_VERIFY(p_desc < p_end && tu_desc_next(p_desc) <= p_end); + midi_desc_cs_endpoint_t const *p_csep = (midi_desc_cs_endpoint_t const *) p_desc; + + TU_LOG_DRV(" Endpoint and CS_Endpoint descriptor %02x\r\n", p_ep->bEndpointAddress); + if (tu_edpt_dir(p_ep->bEndpointAddress) == TUSB_DIR_OUT) { + p_midi->ep_out = p_ep->bEndpointAddress; + p_midi->num_cables_tx = p_csep->bNumEmbMIDIJack; + desc_cb.desc_epout = p_ep; + + TU_ASSERT(tuh_edpt_open(dev_addr, p_ep)); + tu_edpt_stream_open(&p_midi->ep_stream.tx, p_ep); + } else { + p_midi->ep_in = p_ep->bEndpointAddress; + p_midi->num_cables_rx = p_csep->bNumEmbMIDIJack; + desc_cb.desc_epin = p_ep; + + TU_ASSERT(tuh_edpt_open(dev_addr, p_ep)); + tu_edpt_stream_open(&p_midi->ep_stream.rx, p_ep); + } + break; } - len_parsed += p_mdh->bLength; + + default: break; // skip unknown descriptor } p_desc = tu_desc_next(p_desc); - p_mdh = (midi_desc_header_t const *) p_desc; } - TU_VERIFY((p_midi->ep_out != 0 && p_midi->num_cables_tx != 0) || - (p_midi->ep_in != 0 && p_midi->num_cables_rx != 0)); + desc_cb.desc_interface_len = (uint16_t) ((uintptr_t)p_desc - (uintptr_t) desc_itf); - if (in_desc) { - TU_ASSERT(tuh_edpt_open(dev_addr, in_desc)); - tu_edpt_stream_open(&p_midi->ep_stream.rx, in_desc); - } - if (out_desc) { - TU_ASSERT(tuh_edpt_open(dev_addr, out_desc)); - tu_edpt_stream_open(&p_midi->ep_stream.tx, out_desc); - } p_midi->dev_addr = dev_addr; - // if (tuh_midi_interface_descriptor_cb) { - // tuh_midi_interface_descriptor_cb(dev_addr, desc_itf, ); - // } + if (tuh_midi_descriptor_cb) { + tuh_midi_descriptor_cb(dev_addr, &desc_cb); + } return true; } diff --git a/src/class/midi/midi_host.h b/src/class/midi/midi_host.h index adf41d205..286e034f1 100644 --- a/src/class/midi/midi_host.h +++ b/src/class/midi/midi_host.h @@ -62,6 +62,18 @@ //--------------------------------------------------------------------+ // Application API //--------------------------------------------------------------------+ +typedef struct { + const tusb_desc_interface_t* desc_interface; // start of whole midi interface descriptor + uint16_t desc_interface_len; + + const uint8_t* desc_header; + const uint8_t* desc_element; + const tusb_desc_endpoint_t* desc_epin; // endpoint IN descriptor, CS_ENDPOINT is right after + const tusb_desc_endpoint_t* desc_epout; // endpoint OUT descriptor, CS_ENDPOINT is right after + + uint8_t jack_num; + const uint8_t* desc_jack[16]; // list of jack descriptors (embedded + external) +} tuh_midi_descriptor_cb_t; // Check if MIDI interface is mounted bool tuh_midi_mounted(uint8_t dev_addr); @@ -134,7 +146,7 @@ uint32_t tuh_midi_stream_read (uint8_t dev_addr, uint8_t *p_cable_num, uint8_t * // Invoked when MIDI interface is detected in enumeration. Application can copy/parse descriptor if needed. // Note: may be fired before tuh_midi_mount_cb(), therefore midi interface is not mounted/ready. -// TU_ATTR_WEAK void tuh_midi_interface_descriptor_cb(uint8_t dev_addr, const uint8_t* desc_itf, uint16_t desc_len); +TU_ATTR_WEAK void tuh_midi_descriptor_cb(uint8_t dev_addr, tuh_midi_descriptor_cb_t const* desc_cb); // Invoked when device with MIDI interface is mounted. TU_ATTR_WEAK void tuh_midi_mount_cb(uint8_t dev_addr, uint8_t num_cables_rx, uint16_t num_cables_tx); diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 42ce5fc12..95ee489a6 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -281,7 +281,8 @@ typedef enum { // TODO remove enum { DESC_OFFSET_LEN = 0, - DESC_OFFSET_TYPE = 1 + DESC_OFFSET_TYPE = 1, + DESC_OFFSET_SUBTYPE = 2 }; enum { @@ -570,14 +571,19 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t const * tu_desc_next(void const* des return desc8 + desc8[DESC_OFFSET_LEN]; } +// get descriptor length +TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_len(void const* desc) { + return ((uint8_t const*) desc)[DESC_OFFSET_LEN]; +} + // get descriptor type TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_type(void const* desc) { return ((uint8_t const*) desc)[DESC_OFFSET_TYPE]; } -// get descriptor length -TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_len(void const* desc) { - return ((uint8_t const*) desc)[DESC_OFFSET_LEN]; +// get descriptor subtype +TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_desc_subtype(void const* desc) { + return ((uint8_t const*) desc)[DESC_OFFSET_SUBTYPE]; } // find descriptor that match byte1 (type) diff --git a/src/tusb.c b/src/tusb.c index 85ab1d6ae..9303e9bc4 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -142,7 +142,9 @@ void tusb_int_handler(uint8_t rhport, bool in_isr) { uint8_t const* tu_desc_find(uint8_t const* desc, uint8_t const* end, uint8_t byte1) { while (desc + 1 < end) { - if (desc[1] == byte1) return desc; + if (desc[1] == byte1) { + return desc; + } desc += desc[DESC_OFFSET_LEN]; } return NULL; @@ -150,7 +152,9 @@ uint8_t const* tu_desc_find(uint8_t const* desc, uint8_t const* end, uint8_t byt uint8_t const* tu_desc_find2(uint8_t const* desc, uint8_t const* end, uint8_t byte1, uint8_t byte2) { while (desc + 2 < end) { - if (desc[1] == byte1 && desc[2] == byte2) return desc; + if (desc[1] == byte1 && desc[2] == byte2) { + return desc; + } desc += desc[DESC_OFFSET_LEN]; } return NULL; @@ -158,7 +162,9 @@ uint8_t const* tu_desc_find2(uint8_t const* desc, uint8_t const* end, uint8_t by uint8_t const* tu_desc_find3(uint8_t const* desc, uint8_t const* end, uint8_t byte1, uint8_t byte2, uint8_t byte3) { while (desc + 3 < end) { - if (desc[1] == byte1 && desc[2] == byte2 && desc[3] == byte3) return desc; + if (desc[1] == byte1 && desc[2] == byte2 && desc[3] == byte3) { + return desc; + } desc += desc[DESC_OFFSET_LEN]; } return NULL; -- cgit v1.3.1 From de45e4b01a55182f494577a8bf8b46ad51d6eb9f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 15 Mar 2025 23:49:11 +0100 Subject: Add ctrl buffer alignment. Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'src/class/audio') diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 388168424..7a6fd453f 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -208,15 +208,15 @@ tu_static CFG_TUD_MEM_SECTION struct { #endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // Control buffers -tu_static uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; - -#if CFG_TUD_AUDIO > 1 -tu_static uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; -#endif - -#if CFG_TUD_AUDIO > 2 -tu_static uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; -#endif +tu_static CFG_TUD_MEM_SECTION struct { + TUD_EPBUF_DEF(buf1, CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ); + #if CFG_TUD_AUDIO > 1 + TUD_EPBUF_DEF(buf2, CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ); + #endif + #if CFG_TUD_AUDIO > 2 + TUD_EPBUF_DEF(buf3, CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ); + #endif +} ctrl_buf; // Active alternate setting of interfaces tu_static uint8_t alt_setting_1[CFG_TUD_AUDIO_FUNC_1_N_AS_INT]; @@ -1223,18 +1223,18 @@ void audiod_init(void) { // Initialize control buffers switch (i) { case 0: - audio->ctrl_buf = ctrl_buf_1; + audio->ctrl_buf = ctrl_buf.buf1; audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ; break; #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ > 0 case 1: - audio->ctrl_buf = ctrl_buf_2; + audio->ctrl_buf = ctrl_buf.buf2; audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ; break; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ > 0 case 2: - audio->ctrl_buf = ctrl_buf_3; + audio->ctrl_buf = ctrl_buf.buf3; audio->ctrl_buf_sz = CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ; break; #endif -- cgit v1.3.1 From dc0038f6147584dce64323bb4895a3632c312bc1 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 29 May 2025 13:50:05 +0200 Subject: uac2: remove support fifo Signed-off-by: HiFiPhile --- examples/device/audio_4_channel_mic/src/main.c | 35 - .../device/audio_4_channel_mic/src/tusb_config.h | 15 - .../device/audio_4_channel_mic_freertos/src/main.c | 35 - .../audio_4_channel_mic_freertos/src/tusb_config.h | 15 - src/class/audio/audio_device.c | 872 ++------------------- src/class/audio/audio_device.h | 236 +----- 6 files changed, 74 insertions(+), 1134 deletions(-) (limited to 'src/class/audio') diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index e8c40309e..f78e48f0c 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -69,13 +69,8 @@ uint8_t clkValid; audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state -#if CFG_TUD_AUDIO_ENABLE_ENCODING -// Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2 -uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000/CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; -#else // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000]; -#endif void led_blinking_task(void); void audio_task(void); @@ -106,27 +101,6 @@ int main(void) sampleFreqRng.subrange[0].bRes = 0; // Generate dummy data -#if CFG_TUD_AUDIO_ENABLE_ENCODING - uint16_t * p_buff = i2s_dummy_buffer[0]; - uint16_t dataVal = 0; - for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) - { - // CH0 saw wave - *p_buff++ = dataVal; - // CH1 inverted saw wave - *p_buff++ = 3200 + AUDIO_SAMPLE_RATE/1000 - dataVal; - dataVal+= 32; - } - p_buff = i2s_dummy_buffer[1]; - for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) - { - // CH3 square wave - *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 3400:5000; - // CH4 sinus wave - float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000); - *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000); - } -#else uint16_t * p_buff = i2s_dummy_buffer; uint16_t dataVal = 0; for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) @@ -142,7 +116,6 @@ int main(void) float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000); *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000); } -#endif while (1) { @@ -195,15 +168,7 @@ void audio_task(void) uint32_t curr_ms = board_millis(); if ( start_ms == curr_ms ) return; // not enough time start_ms = curr_ms; -#if CFG_TUD_AUDIO_ENABLE_ENCODING - // Write I2S buffer into FIFO - for (uint8_t cnt=0; cnt < 2; cnt++) - { - tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); - } -#else tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX); -#endif } //--------------------------------------------------------------------+ diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h index 46484f847..446a7a32a 100644 --- a/examples/device/audio_4_channel_mic/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic/src/tusb_config.h @@ -115,26 +115,11 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 -#if CFG_TUD_AUDIO_ENABLE_ENCODING - -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN - -#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 -#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value -#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Example write FIFO every 1ms, so it should be 8 times larger for HS device - -#else - #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device -#endif - #ifdef __cplusplus } #endif diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index c9de4029a..99278b5cc 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -105,13 +105,8 @@ uint8_t clkValid; audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; // Volume range state audio_control_range_4_n_t(1) sampleFreqRng; // Sample frequency range state -#if CFG_TUD_AUDIO_ENABLE_ENCODING -// Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2 -uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000/CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; -#else // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000]; -#endif void led_blinking_task(void* param); void usb_device_task(void* param); @@ -132,27 +127,6 @@ int main(void) sampleFreqRng.subrange[0].bRes = 0; // Generate dummy data -#if CFG_TUD_AUDIO_ENABLE_ENCODING - uint16_t * p_buff = i2s_dummy_buffer[0]; - uint16_t dataVal = 0; - for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) - { - // CH0 saw wave - *p_buff++ = dataVal; - // CH1 inverted saw wave - *p_buff++ = 3200 + AUDIO_SAMPLE_RATE/1000 - dataVal; - dataVal+= 32; - } - p_buff = i2s_dummy_buffer[1]; - for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) - { - // CH3 square wave - *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 3400:5000; - // CH4 sinus wave - float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000); - *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000); - } -#else uint16_t * p_buff = i2s_dummy_buffer; uint16_t dataVal = 0; for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++) @@ -168,7 +142,6 @@ int main(void) float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000); *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000); } -#endif #if configSUPPORT_STATIC_ALLOCATION // blinky task @@ -269,15 +242,7 @@ void audio_task(void* param) // Here we simulate a I2S receive callback every 1ms. while (1) { vTaskDelay(1); -#if CFG_TUD_AUDIO_ENABLE_ENCODING - // Write I2S buffer into FIFO - for (uint8_t cnt=0; cnt < 2; cnt++) - { - tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX); - } -#else tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX); -#endif } } diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 5cd93b0d6..5ac51b153 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -121,26 +121,11 @@ extern "C" { #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX 4 // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup #define CFG_TUD_AUDIO_EP_SZ_IN TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX) -#define CFG_TUD_AUDIO_ENABLE_ENCODING 1 #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL 1 -#if CFG_TUD_AUDIO_ENABLE_ENCODING - -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN -#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ CFG_TUD_AUDIO_EP_SZ_IN - -#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 1 -#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX 2 // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value -#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX) -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Example write FIFO every 1ms, so it should be 8 times larger for HS device - -#else - #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX CFG_TUD_AUDIO_EP_SZ_IN #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device -#endif - #ifdef __cplusplus } #endif diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 7a6fd453f..11a3d4a73 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -108,19 +108,19 @@ #endif // Put swap buffer in USB section only if necessary -#if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING +#if USE_LINEAR_BUFFER #define IN_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) #else #define IN_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN #endif -#if USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING +#if USE_LINEAR_BUFFER #define OUT_SW_BUF_MEM_ATTR TU_ATTR_ALIGNED(4) #else #define OUT_SW_BUF_MEM_ATTR CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN #endif // EP IN software buffers and mutexes -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN tu_static IN_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ); @@ -144,12 +144,11 @@ tu_static IN_SW_BUF_MEM_ATTR struct { tu_static osal_mutex_def_t ep_in_ff_mutex_wr_3; #endif #endif -#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN // Linear buffer TX in case: // - target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR -// - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into -#if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) +#if CFG_TUD_AUDIO_ENABLE_EP_IN && USE_LINEAR_BUFFER tu_static CFG_TUD_MEM_SECTION struct { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX); @@ -161,10 +160,10 @@ tu_static CFG_TUD_MEM_SECTION struct { TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX); #endif } lin_buf_in; -#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && USE_LINEAR_BUFFER // EP OUT software buffers and mutexes -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT tu_static OUT_SW_BUF_MEM_ATTR struct { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ); @@ -188,12 +187,11 @@ tu_static OUT_SW_BUF_MEM_ATTR struct { tu_static osal_mutex_def_t ep_out_ff_mutex_rd_3; #endif #endif -#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT // Linear buffer RX in case: // - target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR -// - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) +#if CFG_TUD_AUDIO_ENABLE_EP_OUT && USE_LINEAR_BUFFER tu_static CFG_TUD_MEM_SECTION struct { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 TUD_EPBUF_DEF(buf_1, CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX); @@ -205,7 +203,7 @@ tu_static CFG_TUD_MEM_SECTION struct { TUD_EPBUF_DEF(buf_3, CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX); #endif } lin_buf_out; -#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && USE_LINEAR_BUFFER // Control buffers tu_static CFG_TUD_MEM_SECTION struct { @@ -229,59 +227,6 @@ tu_static uint8_t alt_setting_2[CFG_TUD_AUDIO_FUNC_2_N_AS_INT]; tu_static uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif -// Software encoding/decoding support FIFOs -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; - tu_static tu_fifo_t tx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO];// No need for read mutex as only USB driver reads from FIFO - #endif - #endif - - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; - tu_static tu_fifo_t tx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO];// No need for read mutex as only USB driver reads from FIFO - #endif - #endif - - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - tu_static TU_ATTR_ALIGNED(4) uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; - tu_static tu_fifo_t tx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO];// No need for read mutex as only USB driver reads from FIFO - #endif - #endif -#endif - -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; - tu_static tu_fifo_t rx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO];// No need for write mutex as only USB driver writes into FIFO - #endif - #endif - - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; - tu_static tu_fifo_t rx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO];// No need for write mutex as only USB driver writes into FIFO - #endif - #endif - - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - tu_static TU_ATTR_ALIGNED(4) uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; - tu_static tu_fifo_t rx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; - #if CFG_FIFO_MUTEX - tu_static osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO];// No need for write mutex as only USB driver writes into FIFO - #endif - #endif -#endif - // Aligned buffer for feedback EP #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP tu_static CFG_TUD_MEM_SECTION struct { @@ -363,19 +308,6 @@ typedef struct } feedback; #endif// CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP -// Decoding parameters - parameters are set when alternate AS interface is set by host -// Coding is currently only supported for EP. Software coding corresponding to AS interfaces without EPs are not supported currently. -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - audio_format_type_t format_type_rx; - uint8_t n_channels_rx; - - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - audio_data_format_type_I_t format_type_I_rx; - uint8_t n_bytes_per_sample_rx; - uint8_t n_ff_used_rx; - #endif -#endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL uint32_t sample_rate_tx; uint16_t packet_sz_tx[3]; @@ -384,15 +316,10 @@ typedef struct #endif // Encoding parameters - parameters are set when alternate AS interface is set by host -#if CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL) +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL audio_format_type_t format_type_tx; uint8_t n_channels_tx; uint8_t n_bytes_per_sample_tx; - - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - audio_data_format_type_I_t format_type_I_tx; - uint8_t n_ff_used_tx; - #endif #endif /*------------- From this point, data is not cleared by bus reset -------------*/ @@ -405,40 +332,21 @@ typedef struct uint8_t *alt_setting;// We need to save the current alternate setting this way, because it is possible that there are AS interfaces which do not have an EP! // EP Transfer buffers and FIFOs -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT tu_fifo_t ep_out_ff; #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN tu_fifo_t ep_in_ff; #endif -// Support FIFOs for software encoding and decoding -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - tu_fifo_t *rx_supp_ff; - uint8_t n_rx_supp_ff; - uint16_t rx_supp_ff_sz_max; - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - uint8_t n_channels_per_ff_rx; - #endif -#endif - -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - tu_fifo_t *tx_supp_ff; - uint8_t n_tx_supp_ff; - uint16_t tx_supp_ff_sz_max; - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - uint8_t n_channels_per_ff_tx; - #endif -#endif - -// Linear buffer in case target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically OR the support FIFOs are used -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) +// Linear buffer in case target MCU is not capable of handling a ring buffer FIFO e.g. no hardware buffer is available or driver is would need to be changed dramatically +#if CFG_TUD_AUDIO_ENABLE_EP_OUT && USE_LINEAR_BUFFER uint8_t *lin_buf_out; #define USE_LINEAR_BUFFER_RX 1 #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) +#if CFG_TUD_AUDIO_ENABLE_EP_IN && USE_LINEAR_BUFFER uint8_t *lin_buf_in; #define USE_LINEAR_BUFFER_TX 1 #endif @@ -604,18 +512,10 @@ tu_static CFG_TUD_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received); #endif -#if CFG_TUD_AUDIO_ENABLE_DECODING && CFG_TUD_AUDIO_ENABLE_EP_OUT -static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received); -#endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t *audio); #endif -#if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN -static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t *audio); -#endif - static bool audiod_get_interface(uint8_t rhport, tusb_control_request_t const *p_request); static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p_request); @@ -626,11 +526,8 @@ static bool audiod_verify_itf_exists(uint8_t itf, uint8_t *func_id); static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id); static uint8_t audiod_get_audio_fct_idx(audiod_function_t *audio); -#if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) -static void audiod_parse_for_AS_params(audiod_function_t *audio, uint8_t const *p_desc, uint8_t const *p_desc_end, uint8_t const as_itf); -#endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t const *p_desc); static bool audiod_calc_tx_packet_sz(audiod_function_t *audio); static uint16_t audiod_tx_packet_size(const uint16_t *norminal_size, uint16_t data_count, uint16_t fifo_depth, uint16_t max_size); #endif @@ -651,7 +548,7 @@ bool tud_audio_n_mounted(uint8_t func_id) { // READ API //--------------------------------------------------------------------+ -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT uint16_t tud_audio_n_available(uint8_t func_id) { TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); @@ -673,36 +570,7 @@ tu_fifo_t *tud_audio_n_get_ep_out_ff(uint8_t func_id) { return NULL; } -#endif - -#if CFG_TUD_AUDIO_ENABLE_DECODING && CFG_TUD_AUDIO_ENABLE_EP_OUT -// Delete all content in the support RX FIFOs -bool tud_audio_n_clear_rx_support_ff(uint8_t func_id, uint8_t ff_idx) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff); - return tu_fifo_clear(&_audiod_fct[func_id].rx_supp_ff[ff_idx]); -} - -uint16_t tud_audio_n_available_support_ff(uint8_t func_id, uint8_t ff_idx) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff); - return tu_fifo_count(&_audiod_fct[func_id].rx_supp_ff[ff_idx]); -} - -uint16_t tud_audio_n_read_support_ff(uint8_t func_id, uint8_t ff_idx, void *buffer, uint16_t bufsize) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff); - return tu_fifo_read_n(&_audiod_fct[func_id].rx_supp_ff[ff_idx], buffer, bufsize); -} - -tu_fifo_t *tud_audio_n_get_rx_support_ff(uint8_t func_id, uint8_t ff_idx) { - if (func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_rx_supp_ff) return &_audiod_fct[func_id].rx_supp_ff[ff_idx]; - return NULL; -} -#endif - -// This function is called once an audio packet is received by the USB and is responsible for putting data from USB memory into EP_OUT_FIFO (or support FIFOs + decoding of received stream into audio channels). -// If you prefer your own (more efficient) implementation suiting your purpose set CFG_TUD_AUDIO_ENABLE_DECODING = 0. - -#if CFG_TUD_AUDIO_ENABLE_EP_OUT - +// This function is called once an audio packet is received by the USB and is responsible for putting data from USB memory into EP_OUT_FIFO. static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received) { uint8_t idxItf = 0; uint8_t const *dummy2; @@ -711,62 +579,24 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t *audio, uint16_t idx_audio_fct = audiod_get_audio_fct_idx(audio); TU_VERIFY(audiod_get_AS_interface_index(audio->ep_out_as_intf_num, audio, &idxItf, &dummy2)); - // Call a weak callback here - a possibility for user to get informed an audio packet was received and data gets now loaded into EP FIFO (or decoded into support RX software FIFO) + // Call a weak callback here - a possibility for user to get informed an audio packet was received and data gets now loaded into EP FIFO TU_VERIFY(tud_audio_rx_done_pre_read_cb(rhport, n_bytes_received, idx_audio_fct, audio->ep_out, audio->alt_setting[idxItf])); - #if CFG_TUD_AUDIO_ENABLE_DECODING - - switch (audio->format_type_rx) { - case AUDIO_FORMAT_TYPE_UNDEFINED: - // INDIVIDUAL DECODING PROCEDURE REQUIRED HERE! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT encoding not implemented!\r\n"); - TU_BREAKPOINT(); - break; - - case AUDIO_FORMAT_TYPE_I: - - switch (audio->format_type_I_rx) { - case AUDIO_DATA_FORMAT_TYPE_I_PCM: - TU_VERIFY(audiod_decode_type_I_pcm(rhport, audio, n_bytes_received)); - break; - - default: - // DESIRED CFG_TUD_AUDIO_FORMAT_TYPE_I_RX NOT IMPLEMENTED! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_I_RX encoding not implemented!\r\n"); - TU_BREAKPOINT(); - break; - } - break; - - default: - // Desired CFG_TUD_AUDIO_FORMAT_TYPE_RX not implemented! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_RX not implemented!\r\n"); - TU_BREAKPOINT(); - break; - } - - // Prepare for next transmission - TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); - - #else - - #if USE_LINEAR_BUFFER_RX + #if USE_LINEAR_BUFFER_RX // Data currently is in linear buffer, copy into EP OUT FIFO TU_VERIFY(tu_fifo_write_n(&audio->ep_out_ff, audio->lin_buf_out, n_bytes_received)); // Schedule for next receive TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); - #else + #else // Data is already placed in EP FIFO, schedule for next receive TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_out, &audio->ep_out_ff, audio->ep_out_sz), false); - #endif + #endif - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP + #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP if (audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FIFO_COUNT) { audiod_fb_fifo_count_update(audio, tu_fifo_count(&audio->ep_out_ff)); } - #endif - #endif // Call a weak callback here - a possibility for user to get informed decoding was completed @@ -777,103 +607,11 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t *audio, uint16_t #endif//CFG_TUD_AUDIO_ENABLE_EP_OUT -// The following functions are used in case CFG_TUD_AUDIO_ENABLE_DECODING != 0 -#if CFG_TUD_AUDIO_ENABLE_DECODING && CFG_TUD_AUDIO_ENABLE_EP_OUT - -// Decoding according to 2.3.1.5 Audio Streams - -// Helper function -static inline void *audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesPerSample, void *dst, const void *dst_end, void *src, uint8_t const n_ff_used) { - // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) - uint16_t *dst16 = dst; - uint16_t *src16 = src; - const uint16_t *dst_end16 = dst_end; - uint32_t *dst32 = dst; - uint32_t *src32 = src; - const uint32_t *dst_end32 = dst_end; - - if (nBytesPerSample == 1) { - while (dst16 < dst_end16) { - *dst16++ = *src16++; - src16 += n_ff_used - 1; - } - return src16; - } else if (nBytesPerSample == 2) { - while (dst32 < dst_end32) { - *dst32++ = *src32++; - src32 += n_ff_used - 1; - } - return src32; - } else if (nBytesPerSample == 3) { - while (dst16 < dst_end16) { - *dst16++ = *src16++; - *dst16++ = *src16++; - *dst16++ = *src16++; - src16 += 3 * (n_ff_used - 1); - } - return src16; - } else// nBytesPerSample == 4 - { - while (dst32 < dst_end32) { - *dst32++ = *src32++; - *dst32++ = *src32++; - src32 += 2 * (n_ff_used - 1); - } - return src32; - } -} - -static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t *audio, uint16_t n_bytes_received) { - (void) rhport; - - // Determine amount of samples - uint8_t const n_ff_used = audio->n_ff_used_rx; - uint16_t const nBytesPerFFToRead = n_bytes_received / n_ff_used; - uint8_t cnt_ff; - - // Decode - uint8_t *src; - uint8_t *dst_end; - - tu_fifo_buffer_info_t info; - - for (cnt_ff = 0; cnt_ff < n_ff_used; cnt_ff++) { - tu_fifo_get_write_info(&audio->rx_supp_ff[cnt_ff], &info); - - if (info.len_lin != 0) { - info.len_lin = tu_min16(nBytesPerFFToRead, info.len_lin); - src = &audio->lin_buf_out[cnt_ff * audio->n_channels_per_ff_rx * audio->n_bytes_per_sample_rx]; - dst_end = info.ptr_lin + info.len_lin; - src = audiod_interleaved_copy_bytes_fast_decode(audio->n_bytes_per_sample_rx, info.ptr_lin, dst_end, src, n_ff_used); - - // Handle wrapped part of FIFO - info.len_wrap = tu_min16(nBytesPerFFToRead - info.len_lin, info.len_wrap); - if (info.len_wrap != 0) { - dst_end = info.ptr_wrap + info.len_wrap; - audiod_interleaved_copy_bytes_fast_decode(audio->n_bytes_per_sample_rx, info.ptr_wrap, dst_end, src, n_ff_used); - } - tu_fifo_advance_write_pointer(&audio->rx_supp_ff[cnt_ff], info.len_lin + info.len_wrap); - } - } - - // Number of bytes should be a multiple of CFG_TUD_AUDIO_N_BYTES_PER_SAMPLE_RX * CFG_TUD_AUDIO_N_CHANNELS_RX but checking makes no sense - no way to correct it - // TU_VERIFY(cnt != n_bytes); - - #if CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - if (audio->feedback.compute_method == AUDIO_FEEDBACK_METHOD_FIFO_COUNT) { - audiod_fb_fifo_count_update(audio, tu_fifo_count(&audio->rx_supp_ff[0])); - } - #endif - - return true; -} -#endif//CFG_TUD_AUDIO_ENABLE_DECODING - //--------------------------------------------------------------------+ // WRITE API //--------------------------------------------------------------------+ -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN /** * \brief Write data to EP in buffer @@ -902,71 +640,8 @@ tu_fifo_t *tud_audio_n_get_ep_in_ff(uint8_t func_id) { return NULL; } -#endif - -#if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN - -uint16_t tud_audio_n_flush_tx_support_ff(uint8_t func_id)// Force all content in the support TX FIFOs to be written into linear buffer and schedule a transmit -{ - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); - audiod_function_t *audio = &_audiod_fct[func_id]; - - uint16_t n_bytes_copied = tu_fifo_count(&audio->tx_supp_ff[0]); - - TU_VERIFY(audiod_tx_done_cb(audio->rhport, audio)); - - n_bytes_copied -= tu_fifo_count(&audio->tx_supp_ff[0]); - n_bytes_copied = n_bytes_copied * audio->tx_supp_ff[0].item_size; - - return n_bytes_copied; -} - -bool tud_audio_n_clear_tx_support_ff(uint8_t func_id, uint8_t ff_idx) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_tx_supp_ff); - return tu_fifo_clear(&_audiod_fct[func_id].tx_supp_ff[ff_idx]); -} - -uint16_t tud_audio_n_write_support_ff(uint8_t func_id, uint8_t ff_idx, const void *data, uint16_t len) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_tx_supp_ff); - return tu_fifo_write_n(&_audiod_fct[func_id].tx_supp_ff[ff_idx], data, len); -} - -tu_fifo_t *tud_audio_n_get_tx_support_ff(uint8_t func_id, uint8_t ff_idx) { - if (func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL && ff_idx < _audiod_fct[func_id].n_tx_supp_ff) return &_audiod_fct[func_id].tx_supp_ff[ff_idx]; - return NULL; -} - -#endif - - -#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP -// If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_done_cb() is called in inform user -bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) { - TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); - - TU_VERIFY(_audiod_fct[func_id].ep_int != 0); - - // We write directly into the EP's buffer - abort if previous transfer not complete - TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int)); - - // Check length - if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio_interrupt_data_t)) == 0) { - // Schedule transmit - TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf)), 0); - } else { - // Release endpoint since we don't make any transfer - usbd_edpt_release(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int); - } - - return true; -} -#endif - // This function is called once a transmit of an audio packet was successfully completed. Here, we encode samples and place it in IN EP's buffer for next transmission. -// If you prefer your own (more efficient) implementation suiting your purpose set CFG_TUD_AUDIO_ENABLE_ENCODING = 0 and use tud_audio_n_write. - // n_bytes_copied - Informs caller how many bytes were loaded. In case n_bytes_copied = 0, a ZLP is scheduled to inform host no data is available for current frame. -#if CFG_TUD_AUDIO_ENABLE_EP_IN static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t *audio) { uint8_t idxItf; uint8_t const *dummy2; @@ -984,59 +659,18 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t *audio) { // Send everything in ISO EP FIFO uint16_t n_bytes_tx; - // If support FIFOs are used, encode and schedule transmit - #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN - switch (audio->format_type_tx) { - case AUDIO_FORMAT_TYPE_UNDEFINED: - // INDIVIDUAL ENCODING PROCEDURE REQUIRED HERE! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT encoding not implemented!\r\n"); - TU_BREAKPOINT(); - n_bytes_tx = 0; - break; - - case AUDIO_FORMAT_TYPE_I: - - switch (audio->format_type_I_tx) { - case AUDIO_DATA_FORMAT_TYPE_I_PCM: - - n_bytes_tx = audiod_encode_type_I_pcm(rhport, audio); - break; - - default: - // YOUR ENCODING IS REQUIRED HERE! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_I_TX encoding not implemented!\r\n"); - TU_BREAKPOINT(); - n_bytes_tx = 0; - break; - } - break; - - default: - // Desired CFG_TUD_AUDIO_FORMAT_TYPE_TX not implemented! - TU_LOG2(" Desired CFG_TUD_AUDIO_FORMAT_TYPE_TX not implemented!\r\n"); - TU_BREAKPOINT(); - n_bytes_tx = 0; - break; - } - - TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, n_bytes_tx)); - - #else - // No support FIFOs, if no linear buffer required schedule transmit, else put data into linear buffer and schedule - #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - // packet_sz_tx is based on total packet size, here we want size for each support buffer. + #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + // packet_sz_tx is based on total packet size n_bytes_tx = audiod_tx_packet_size(audio->packet_sz_tx, tu_fifo_count(&audio->ep_in_ff), audio->ep_in_ff.depth, audio->ep_in_sz); - #else + #else n_bytes_tx = tu_min16(tu_fifo_count(&audio->ep_in_ff), audio->ep_in_sz);// Limit up to max packet size, more can not be done for ISO - #endif - #if USE_LINEAR_BUFFER_TX + #endif + #if USE_LINEAR_BUFFER_TX tu_fifo_read_n(&audio->ep_in_ff, audio->lin_buf_in, n_bytes_tx); TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_in, audio->lin_buf_in, n_bytes_tx)); - #else + #else // Send everything in ISO EP FIFO TU_VERIFY(usbd_edpt_xfer_fifo(rhport, audio->ep_in, &audio->ep_in_ff, n_bytes_tx)); - #endif - #endif // Call a weak callback here - a possibility for user to get informed former TX was completed and how many bytes were loaded for the next frame @@ -1045,140 +679,33 @@ static bool audiod_tx_done_cb(uint8_t rhport, audiod_function_t *audio) { return true; } -#endif//CFG_TUD_AUDIO_ENABLE_EP_IN - -#if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_EP_IN -// Take samples from the support buffer and encode them into the IN EP software FIFO -// Returns number of bytes written into linear buffer - -/* 2.3.1.7.1 PCM Format -The PCM (Pulse Coded Modulation) format is the most commonly used audio format to represent audio -data streams. The audio data is not compressed and uses a signed two’s-complement fixed point format. It -is left-justified (the sign bit is the Msb) and data is padded with trailing zeros to fill the remaining unused -bits of the subslot. The binary point is located to the right of the sign bit so that all values lie within the -range [-1, +1) - */ - -/* - * This function encodes channels saved within the support FIFOs into one stream by interleaving the PCM samples - * in the support FIFOs according to 2.3.1.5 Audio Streams. It does not control justification (left or right) and - * does not change the number of bytes per sample. - * */ - -// Helper function -static inline void *audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesPerSample, void *src, const void *src_end, void *dst, uint8_t const n_ff_used) { - // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) - uint16_t *dst16 = dst; - uint16_t *src16 = src; - const uint16_t *src_end16 = src_end; - uint32_t *dst32 = dst; - uint32_t *src32 = src; - const uint32_t *src_end32 = src_end; - - if (nBytesPerSample == 1) { - while (src16 < src_end16) { - *dst16++ = *src16++; - dst16 += n_ff_used - 1; - } - return dst16; - } else if (nBytesPerSample == 2) { - while (src32 < src_end32) { - *dst32++ = *src32++; - dst32 += n_ff_used - 1; - } - return dst32; - } else if (nBytesPerSample == 3) { - while (src16 < src_end16) { - *dst16++ = *src16++; - *dst16++ = *src16++; - *dst16++ = *src16++; - dst16 += 3 * (n_ff_used - 1); - } - return dst16; - } else// nBytesPerSample == 4 - { - while (src32 < src_end32) { - *dst32++ = *src32++; - *dst32++ = *src32++; - dst32 += 2 * (n_ff_used - 1); - } - return dst32; - } -} - -static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t *audio) { - // This function relies on the fact that the length of the support FIFOs was configured to be a multiple of the active sample size in bytes s.t. no sample is split within a wrap - // This is ensured within set_interface, where the FIFOs are reconfigured according to this size - - // We encode directly into IN EP's linear buffer - abort if previous transfer not complete - TU_VERIFY(!usbd_edpt_busy(rhport, audio->ep_in)); - - // Determine amount of samples - uint8_t const n_ff_used = audio->n_ff_used_tx; - uint16_t nBytesPerFFToSend = tu_fifo_count(&audio->tx_supp_ff[0]); - uint8_t cnt_ff; - - for (cnt_ff = 1; cnt_ff < n_ff_used; cnt_ff++) { - uint16_t const count = tu_fifo_count(&audio->tx_supp_ff[cnt_ff]); - if (count < nBytesPerFFToSend) { - nBytesPerFFToSend = count; - } - } - - #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - const uint16_t norm_packet_sz_tx[3] = {audio->packet_sz_tx[0] / n_ff_used, - audio->packet_sz_tx[1] / n_ff_used, - audio->packet_sz_tx[2] / n_ff_used}; - // packet_sz_tx is based on total packet size, here we want size for each support buffer. - nBytesPerFFToSend = audiod_tx_packet_size(norm_packet_sz_tx, nBytesPerFFToSend, audio->tx_supp_ff[0].depth, audio->ep_in_sz / n_ff_used); - // Check if there is enough data - if (nBytesPerFFToSend == 0) return 0; - #else - // Check if there is enough data - if (nBytesPerFFToSend == 0) return 0; - // Limit to maximum sample number - THIS IS A POSSIBLE ERROR SOURCE IF TOO MANY SAMPLE WOULD NEED TO BE SENT BUT CAN NOT! - nBytesPerFFToSend = tu_min16(nBytesPerFFToSend, audio->ep_in_sz / n_ff_used); - // Round to full number of samples (flooring) - uint16_t const nSlotSize = audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx; - nBytesPerFFToSend = (nBytesPerFFToSend / nSlotSize) * nSlotSize; - #endif - - // Encode - uint8_t *dst; - uint8_t *src_end; - - tu_fifo_buffer_info_t info; - - for (cnt_ff = 0; cnt_ff < n_ff_used; cnt_ff++) { - dst = &audio->lin_buf_in[cnt_ff * audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx]; - - tu_fifo_get_read_info(&audio->tx_supp_ff[cnt_ff], &info); +#endif - if (info.len_lin != 0) { - info.len_lin = tu_min16(nBytesPerFFToSend, info.len_lin);// Limit up to desired length - src_end = (uint8_t *) info.ptr_lin + info.len_lin; - dst = audiod_interleaved_copy_bytes_fast_encode(audio->n_bytes_per_sample_tx, info.ptr_lin, src_end, dst, n_ff_used); +#if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP +// If no interrupt transmit is pending bytes get written into buffer and a transmit is scheduled - once transmit completed tud_audio_int_done_cb() is called in inform user +bool tud_audio_int_n_write(uint8_t func_id, const audio_interrupt_data_t *data) { + TU_VERIFY(func_id < CFG_TUD_AUDIO && _audiod_fct[func_id].p_desc != NULL); - // Limit up to desired length - info.len_wrap = tu_min16(nBytesPerFFToSend - info.len_lin, info.len_wrap); + TU_VERIFY(_audiod_fct[func_id].ep_int != 0); - // Handle wrapped part of FIFO - if (info.len_wrap != 0) { - src_end = (uint8_t *) info.ptr_wrap + info.len_wrap; - audiod_interleaved_copy_bytes_fast_encode(audio->n_bytes_per_sample_tx, info.ptr_wrap, src_end, dst, n_ff_used); - } + // We write directly into the EP's buffer - abort if previous transfer not complete + TU_VERIFY(usbd_edpt_claim(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int)); - tu_fifo_advance_read_pointer(&audio->tx_supp_ff[cnt_ff], info.len_lin + info.len_wrap); - } + // Check length + if (tu_memcpy_s(int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf), data, sizeof(audio_interrupt_data_t)) == 0) { + // Schedule transmit + TU_ASSERT(usbd_edpt_xfer(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int, int_ep_buf[func_id].buf, sizeof(int_ep_buf[func_id].buf)), 0); + } else { + // Release endpoint since we don't make any transfer + usbd_edpt_release(_audiod_fct[func_id].rhport, _audiod_fct[func_id].ep_int); } - return nBytesPerFFToSend * n_ff_used; + return true; } -#endif//CFG_TUD_AUDIO_ENABLE_ENCODING - -// This function is called once a transmit of a feedback packet was successfully completed. Here, we get the next feedback value to be sent +#endif #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP +// This function is called once a transmit of a feedback packet was successfully completed. Here, we get the next feedback value to be sent static inline bool audiod_fb_send(audiod_function_t *audio) { bool apply_correction = (TUSB_SPEED_FULL == tud_speed_get()) && audio->feedback.format_correction; // Format the feedback value @@ -1260,7 +787,7 @@ void audiod_init(void) { } // Initialize IN EP FIFO if required -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN switch (i) { #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 @@ -1288,7 +815,7 @@ void audiod_init(void) { break; #endif } -#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_IN // Initialize linear buffers #if USE_LINEAR_BUFFER_TX @@ -1312,7 +839,7 @@ void audiod_init(void) { #endif// USE_LINEAR_BUFFER_TX // Initialize OUT EP FIFO if required -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT switch (i) { #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 @@ -1340,7 +867,7 @@ void audiod_init(void) { break; #endif } -#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#endif// CFG_TUD_AUDIO_ENABLE_EP_OUT // Initialize linear buffers #if USE_LINEAR_BUFFER_RX @@ -1382,150 +909,6 @@ void audiod_init(void) { #endif } #endif// CFG_TUD_AUDIO_ENABLE_FEEDBACK_EP - - // Initialize TX support FIFOs if required -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - - switch (i) { - #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - case 0: - audio->tx_supp_ff = tx_supp_ff_1; - audio->n_tx_supp_ff = CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; - audio->tx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO; cnt++) { - tu_fifo_config(&tx_supp_ff_1[cnt], tx_supp_ff_buf_1[cnt], CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ, 1, true); - #if CFG_FIFO_MUTEX - tu_fifo_config_mutex(&tx_supp_ff_1[cnt], osal_mutex_create(&tx_supp_ff_mutex_wr_1[cnt]), NULL); - #endif - } - - break; - #endif// CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - case 1: - audio->tx_supp_ff = tx_supp_ff_2; - audio->n_tx_supp_ff = CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO; - audio->tx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO; cnt++) { - tu_fifo_config(&tx_supp_ff_2[cnt], tx_supp_ff_buf_2[cnt], CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ, 1, true); - #if CFG_FIFO_MUTEX - tu_fifo_config_mutex(&tx_supp_ff_2[cnt], osal_mutex_create(&tx_supp_ff_mutex_wr_2[cnt]), NULL); - #endif - } - - break; - #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - case 2: - audio->tx_supp_ff = tx_supp_ff_3; - audio->n_tx_supp_ff = CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO; - audio->tx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO; cnt++) { - tu_fifo_config(&tx_supp_ff_3[cnt], tx_supp_ff_buf_3[cnt], CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ, 1, true); - #if CFG_FIFO_MUTEX - tu_fifo_config_mutex(&tx_supp_ff_3[cnt], osal_mutex_create(&tx_supp_ff_mutex_wr_3[cnt]), NULL); - #endif - } - - break; - #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - } -#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - - // Set encoding parameters for Type_I formats -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - switch (i) { - #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - case 0: - audio->n_channels_per_ff_tx = CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX; - break; - #endif - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - case 1: - audio->n_channels_per_ff_tx = CFG_TUD_AUDIO_FUNC_2_CHANNEL_PER_FIFO_TX; - break; - #endif - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - case 2: - audio->n_channels_per_ff_tx = CFG_TUD_AUDIO_FUNC_3_CHANNEL_PER_FIFO_TX; - break; - #endif - } -#endif// CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - - // Initialize RX support FIFOs if required -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - - switch (i) { - #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - case 0: - audio->rx_supp_ff = rx_supp_ff_1; - audio->n_rx_supp_ff = CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO; - audio->rx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO; cnt++) { - tu_fifo_config(&rx_supp_ff_1[cnt], rx_supp_ff_buf_1[cnt], CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ, 1, true); - #if CFG_FIFO_MUTEX - tu_fifo_config_mutex(&rx_supp_ff_1[cnt], osal_mutex_create(&rx_supp_ff_mutex_rd_1[cnt]), NULL); - #endif - } - - break; - #endif// CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - case 1: - audio->rx_supp_ff = rx_supp_ff_2; - audio->n_rx_supp_ff = CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO; - audio->rx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO; cnt++) { - tu_fifo_config(&rx_supp_ff_2[cnt], rx_supp_ff_buf_2[cnt], CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ, 1, true); - #if CFG_FIFO_MUTEX - tu_fifo_config_mutex(&rx_supp_ff_2[cnt], osal_mutex_create(&rx_supp_ff_mutex_rd_2[cnt]), NULL); - #endif - } - - break; - #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - case 2: - audio->rx_supp_ff = rx_supp_ff_3; - audio->n_rx_supp_ff = CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO; - audio->rx_supp_ff_sz_max = CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ; - for (uint8_t cnt = 0; cnt < CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO; cnt++) { - tu_fifo_config(&rx_supp_ff_3[cnt], rx_supp_ff_buf_3[cnt], CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ, 1, true); - #if CFG_FIFO_MUTEX - tu_fifo_config_mutex(&rx_supp_ff_3[cnt], osal_mutex_create(&rx_supp_ff_mutex_rd_3[cnt]), NULL); - #endif - } - - break; - #endif// CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - } -#endif// CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - - // Set encoding parameters for Type_I formats -#if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - switch (i) { - #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - case 0: - audio->n_channels_per_ff_rx = CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_RX; - break; - #endif - #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - case 1: - audio->n_channels_per_ff_rx = CFG_TUD_AUDIO_FUNC_2_CHANNEL_PER_FIFO_RX; - break; - #endif - #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - case 2: - audio->n_channels_per_ff_rx = CFG_TUD_AUDIO_FUNC_3_CHANNEL_PER_FIFO_RX; - break; - #endif - } -#endif// CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING } } @@ -1540,25 +923,13 @@ void audiod_reset(uint8_t rhport) { audiod_function_t *audio = &_audiod_fct[i]; tu_memclr(audio, ITF_MEM_RESET_SIZE); -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN tu_fifo_clear(&audio->ep_in_ff); #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT tu_fifo_clear(&audio->ep_out_ff); #endif - -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { - tu_fifo_clear(&audio->tx_supp_ff[cnt]); - } -#endif - -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) { - tu_fifo_clear(&audio->rx_supp_ff[cnt]); - } -#endif } } @@ -1783,13 +1154,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #endif // Clear FIFOs, since data is no longer valid - #if !CFG_TUD_AUDIO_ENABLE_ENCODING tu_fifo_clear(&audio->ep_in_ff); - #else - for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { - tu_fifo_clear(&audio->tx_supp_ff[cnt]); - } - #endif // Invoke callback - can be used to stop data sampling TU_VERIFY(tud_audio_set_itf_close_EP_cb(rhport, p_request)); @@ -1812,13 +1177,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #endif // Clear FIFOs, since data is no longer valid - #if !CFG_TUD_AUDIO_ENABLE_DECODING tu_fifo_clear(&audio->ep_out_ff); - #else - for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) { - tu_fifo_clear(&audio->rx_supp_ff[cnt]); - } - #endif // Invoke callback - can be used to stop data sampling TU_VERIFY(tud_audio_set_itf_close_EP_cb(rhport, p_request)); @@ -1848,7 +1207,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p while (p_desc_end - p_desc > 0) { // Find correct interface if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE && ((tusb_desc_interface_t const *) p_desc)->bInterfaceNumber == itf && ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == alt) { -#if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL uint8_t const *p_desc_parse_for_params = p_desc; #endif // From this point forward follow the EP descriptors associated to the current alternate setting interface - Open EPs if necessary @@ -1875,21 +1234,10 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p audio->ep_in_as_intf_num = itf; audio->ep_in_sz = tu_edpt_packet_size(desc_ep); - // If software encoding is enabled, parse for the corresponding parameters - doing this here means only AS interfaces with EPs get scanned for parameters - #if CFG_TUD_AUDIO_ENABLE_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL - audiod_parse_for_AS_params(audio, p_desc_parse_for_params, p_desc_end, itf); - - // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap - #if CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - const uint16_t active_fifo_depth = (uint16_t) ((audio->tx_supp_ff_sz_max / (audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx)) * (audio->n_channels_per_ff_tx * audio->n_bytes_per_sample_tx)); - for (uint8_t cnt = 0; cnt < audio->n_tx_supp_ff; cnt++) { - tu_fifo_config(&audio->tx_supp_ff[cnt], audio->tx_supp_ff[cnt].buffer, active_fifo_depth, 1, true); - } - audio->n_ff_used_tx = audio->n_channels_tx / audio->n_channels_per_ff_tx; - TU_ASSERT(audio->n_ff_used_tx <= audio->n_tx_supp_ff); - #endif + // If flow control is enabled, parse for the corresponding parameters - doing this here means only AS interfaces with EPs get scanned for parameters + #if CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL + audiod_parse_flow_control_params(audio, p_desc_parse_for_params); #endif - // Schedule first transmit if alternate interface is not zero i.e. streaming is disabled - in case no sample data is available a ZLP is loaded // It is necessary to trigger this here since the refill is done with an RX FIFO empty interrupt which can only trigger if something was in there TU_VERIFY(audiod_tx_done_cb(rhport, &_audiod_fct[func_id])); @@ -1897,7 +1245,6 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p #endif// CFG_TUD_AUDIO_ENABLE_EP_IN #if CFG_TUD_AUDIO_ENABLE_EP_OUT - if (tu_edpt_dir(ep_addr) == TUSB_DIR_OUT)// Checking usage not necessary { // Save address @@ -1905,20 +1252,6 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p audio->ep_out_as_intf_num = itf; audio->ep_out_sz = tu_edpt_packet_size(desc_ep); - #if CFG_TUD_AUDIO_ENABLE_DECODING - audiod_parse_for_AS_params(audio, p_desc_parse_for_params, p_desc_end, itf); - - // Reconfigure size of support FIFOs - this is necessary to avoid samples to get split in case of a wrap - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - const uint16_t active_fifo_depth = (audio->rx_supp_ff_sz_max / audio->n_bytes_per_sample_rx) * audio->n_bytes_per_sample_rx; - for (uint8_t cnt = 0; cnt < audio->n_rx_supp_ff; cnt++) { - tu_fifo_config(&audio->rx_supp_ff[cnt], audio->rx_supp_ff[cnt].buffer, active_fifo_depth, 1, true); - } - audio->n_ff_used_rx = audio->n_channels_rx / audio->n_channels_per_ff_rx; - TU_ASSERT(audio->n_ff_used_rx <= audio->n_rx_supp_ff); - #endif - #endif - // Prepare for incoming data #if USE_LINEAR_BUFFER_RX TU_VERIFY(usbd_edpt_xfer(rhport, audio->ep_out, audio->lin_buf_out, audio->ep_out_sz), false); @@ -1971,12 +1304,7 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p case AUDIO_FEEDBACK_METHOD_FIFO_COUNT: { // Initialize the threshold level to half filled - uint16_t fifo_lvl_thr; - #if CFG_TUD_AUDIO_ENABLE_DECODING - fifo_lvl_thr = tu_fifo_depth(&audio->rx_supp_ff[0]) / 2; - #else - fifo_lvl_thr = tu_fifo_depth(&audio->ep_out_ff) / 2; - #endif + uint16_t fifo_lvl_thr = tu_fifo_depth(&audio->ep_out_ff) / 2; audio->feedback.compute.fifo_count.fifo_lvl_thr = fifo_lvl_thr; audio->feedback.compute.fifo_count.fifo_lvl_avg = ((uint32_t) fifo_lvl_thr) << 16; // Avoid 64bit division @@ -2555,86 +1883,22 @@ static bool audiod_verify_ep_exists(uint8_t ep, uint8_t *func_id) { return false; } -#if (CFG_TUD_AUDIO_ENABLE_EP_IN && (CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_ENCODING)) || (CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING) -// p_desc points to the AS interface of alternate setting zero -// itf is the interface number of the corresponding interface - we check if the interface belongs to EP in or EP out to see if it is a TX or RX parameter -// Currently, only AS interfaces with an EP (in or out) are supposed to be parsed for! -static void audiod_parse_for_AS_params(audiod_function_t *audio, uint8_t const *p_desc, uint8_t const *p_desc_end, uint8_t const as_itf) { - #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_in_as_intf_num && as_itf != audio->ep_out_as_intf_num) return;// Abort, this interface has no EP, this driver does not support this currently - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_in_as_intf_num) return; - #endif - #if !CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_out_as_intf_num) return; - #endif +#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL +static void audiod_parse_flow_control_params(audiod_function_t *audio, uint8_t const *p_desc) { p_desc = tu_desc_next(p_desc);// Exclude standard AS interface descriptor of current alternate interface descriptor - // Condition modified from p_desc < p_desc_end to prevent gcc>=12 strict-overflow warning - while (p_desc_end - p_desc > 0) { - // Abort if follow up descriptor is a new standard interface descriptor - indicates the last AS descriptor was already finished - if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) break; - - // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels - if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_AS_GENERAL) { - #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (as_itf == audio->ep_in_as_intf_num) { - audio->n_channels_tx = ((audio_desc_cs_as_interface_t const *) p_desc)->bNrChannels; - audio->format_type_tx = (audio_format_type_t) (((audio_desc_cs_as_interface_t const *) p_desc)->bFormatType); - - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING - audio->format_type_I_tx = (audio_data_format_type_I_t) (((audio_desc_cs_as_interface_t const *) p_desc)->bmFormats); - #endif - } - #endif - - #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - if (as_itf == audio->ep_out_as_intf_num) { - audio->n_channels_rx = ((audio_desc_cs_as_interface_t const *) p_desc)->bNrChannels; - audio->format_type_rx = ((audio_desc_cs_as_interface_t const *) p_desc)->bFormatType; - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING - audio->format_type_I_rx = ((audio_desc_cs_as_interface_t const *) p_desc)->bmFormats; - #endif - } - #endif - } + // Look for a Class-Specific AS Interface Descriptor(4.9.2) to verify format type and format and also to get number of physical channels + if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_AS_GENERAL) { + audio->n_channels_tx = ((audio_desc_cs_as_interface_t const *) p_desc)->bNrChannels; + audio->format_type_tx = (audio_format_type_t) (((audio_desc_cs_as_interface_t const *) p_desc)->bFormatType); // Look for a Type I Format Type Descriptor(2.3.1.6 - Audio Formats) - #if CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING || CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL || CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING + p_desc = tu_desc_next(p_desc); if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AS_INTERFACE_FORMAT_TYPE && ((audio_desc_type_I_format_t const *) p_desc)->bFormatType == AUDIO_FORMAT_TYPE_I) { - #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_in_as_intf_num && as_itf != audio->ep_out_as_intf_num) break;// Abort loop, this interface has no EP, this driver does not support this currently - #endif - #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_in_as_intf_num) break; - #endif - #if !CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_EP_OUT - if (as_itf != audio->ep_out_as_intf_num) break; - #endif - - #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (as_itf == audio->ep_in_as_intf_num) { - audio->n_bytes_per_sample_tx = ((audio_desc_type_I_format_t const *) p_desc)->bSubslotSize; - } - #endif - - #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - if (as_itf == audio->ep_out_as_intf_num) { - audio->n_bytes_per_sample_rx = ((audio_desc_type_I_format_t const *) p_desc)->bSubslotSize; - } - #endif + audio->n_bytes_per_sample_tx = ((audio_desc_type_I_format_t const *) p_desc)->bSubslotSize; } - #endif - - // Other format types are not supported yet - - p_desc = tu_desc_next(p_desc); } } -#endif - -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL static bool audiod_calc_tx_packet_sz(audiod_function_t *audio) { TU_VERIFY(audio->format_type_tx == AUDIO_FORMAT_TYPE_I); diff --git a/src/class/audio/audio_device.h b/src/class/audio/audio_device.h index 0a7bff212..603535b2a 100644 --- a/src/class/audio/audio_device.h +++ b/src/class/audio/audio_device.h @@ -206,153 +206,6 @@ // Audio control interrupt EP - 6 Bytes according to UAC 2 specification (p. 74) #define CFG_TUD_AUDIO_INTERRUPT_EP_SZ 6 -// Use software encoding/decoding - -// The software coding feature of the driver is not mandatory. It is useful if, for instance, you have two I2S streams which need to be interleaved -// into a single PCM stream as SAMPLE_1 | SAMPLE_2 | SAMPLE_3 | SAMPLE_4. -// -// Currently, only PCM type I encoding/decoding is supported! -// -// If the coding feature is to be used, support FIFOs need to be configured. Their sizes and numbers are defined below. - -// Encoding/decoding is done in software and thus time consuming. If you can encode/decode your stream more efficiently do not use the -// support FIFOs but write/read directly into/from the EP_X_SW_BUFFER_FIFOs using -// - tud_audio_n_write() or -// - tud_audio_n_read(). -// To write/read to/from the support FIFOs use -// - tud_audio_n_write_support_ff() or -// - tud_audio_n_read_support_ff(). -// -// The encoding/decoding format type done is defined below. -// -// The encoding/decoding starts when the private callback functions -// - audio_tx_done_cb() -// - audio_rx_done_cb() -// are invoked. If support FIFOs are used, the corresponding encoding/decoding functions are called from there. -// Once encoding/decoding is done the result is put directly into the EP_X_SW_BUFFER_FIFOs. You can use the public callback functions -// - tud_audio_tx_done_pre_load_cb() or tud_audio_tx_done_post_load_cb() -// - tud_audio_rx_done_pre_read_cb() or tud_audio_rx_done_post_read_cb() -// if you want to get informed what happened. -// -// If you don't use the support FIFOs you may use the public callback functions -// - tud_audio_tx_done_pre_load_cb() or tud_audio_tx_done_post_load_cb() -// - tud_audio_rx_done_pre_read_cb() or tud_audio_rx_done_post_read_cb() -// to write/read from/into the EP_X_SW_BUFFER_FIFOs at the right time. -// -// If you need a different encoding which is not support so far implement it in the -// - audio_tx_done_cb() -// - audio_rx_done_cb() -// functions. - -// Enable encoding/decodings - for these to work, support FIFOs need to be setup in appropriate numbers and size -// The actual coding parameters of active AS alternate interface is parsed from the descriptors - -// The item size of the FIFO is always fixed to one i.e. bytes! Furthermore, the actively used FIFO depth is reconfigured such that the depth is a multiple -// of the current sample size in order to avoid samples to get split up in case of a wrap in the FIFO ring buffer (depth = (max_depth / sample_sz) * sample_sz)! -// This is important to remind in case you use DMAs! If the sample sizes changes, the DMA MUST BE RECONFIGURED just like the FIFOs for a different depth!!! - -// For PCM encoding/decoding - -#ifndef CFG_TUD_AUDIO_ENABLE_ENCODING -#define CFG_TUD_AUDIO_ENABLE_ENCODING 0 -#endif - -#ifndef CFG_TUD_AUDIO_ENABLE_DECODING -#define CFG_TUD_AUDIO_ENABLE_DECODING 0 -#endif - -// This enabling allows to save the current coding parameters e.g. # of bytes per sample etc. - TYPE_I includes common PCM encoding -#ifndef CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING -#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING 0 -#endif - -#ifndef CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING -#define CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING 0 -#endif - -// Type I Coding parameters not given within UAC2 descriptors -// It would be possible to allow for a more flexible setting and not fix this parameter as done below. However, this is most often not needed and kept for later if really necessary. The more flexible setting could be implemented within set_interface(), however, how the values are saved per alternate setting is to be determined! -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING && CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING -#ifndef CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX -#error You must tell the driver the number of channels per FIFO for the interleaved encoding! E.g. for an I2S interface having two channels, CHANNEL_PER_FIFO = 2 as the I2S stream having two channels is usually saved within one FIFO -#endif -#if CFG_TUD_AUDIO > 1 -#ifndef CFG_TUD_AUDIO_FUNC_2_CHANNEL_PER_FIFO_TX -#error You must tell the driver the number of channels per FIFO for the interleaved encoding! E.g. for an I2S interface having two channels, CHANNEL_PER_FIFO = 2 as the I2S stream having two channels is usually saved within one FIFO -#endif -#endif -#if CFG_TUD_AUDIO > 2 -#ifndef CFG_TUD_AUDIO_FUNC_3_CHANNEL_PER_FIFO_TX -#error You must tell the driver the number of channels per FIFO for the interleaved encoding! E.g. for an I2S interface having two channels, CHANNEL_PER_FIFO = 2 as the I2S stream having two channels is usually saved within one FIFO -#endif -#endif -#endif - -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING && CFG_TUD_AUDIO_ENABLE_TYPE_I_DECODING -#ifndef CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_RX -#error You must tell the driver the number of channels per FIFO for the interleaved encoding! E.g. for an I2S interface having two channels, CHANNEL_PER_FIFO = 2 as the I2S stream having two channels is usually saved within one FIFO -#endif -#if CFG_TUD_AUDIO > 1 -#ifndef CFG_TUD_AUDIO_FUNC_2_CHANNEL_PER_FIFO_RX -#error You must tell the driver the number of channels per FIFO for the interleaved encoding! E.g. for an I2S interface having two channels, CHANNEL_PER_FIFO = 2 as the I2S stream having two channels is usually saved within one FIFO -#endif -#endif -#if CFG_TUD_AUDIO > 2 -#ifndef CFG_TUD_AUDIO_FUNC_3_CHANNEL_PER_FIFO_RX -#error You must tell the driver the number of channels per FIFO for the interleaved encoding! E.g. for an I2S interface having two channels, CHANNEL_PER_FIFO = 2 as the I2S stream having two channels is usually saved within one FIFO -#endif -#endif -#endif - -// Remaining types not support so far - -// Number of support FIFOs to set up - multiple channels can be handled by one FIFO - very common is two channels per FIFO stemming from one I2S interface -#ifndef CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO -#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO 0 -#endif -#ifndef CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO -#define CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO 0 -#endif -#ifndef CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO -#define CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO 0 -#endif - -#ifndef CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO -#define CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO 0 -#endif -#ifndef CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO -#define CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO 0 -#endif -#ifndef CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO -#define CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO 0 -#endif - -// Size of support FIFOs IN BYTES - if size > 0 there are as many FIFOs set up as CFG_TUD_AUDIO_FUNC_X_N_TX_SUPP_SW_FIFO and CFG_TUD_AUDIO_FUNC_X_N_RX_SUPP_SW_FIFO -#ifndef CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ -#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ 0 // FIFO size - minimum size: ceil(f_s/1000) * max(# of TX channels) / (# of TX support FIFOs) * max(# of bytes per sample) -#endif -#ifndef CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ -#define CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ 0 -#endif -#ifndef CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ -#define CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ 0 -#endif - -#ifndef CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ -#define CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ 0 // FIFO size - minimum size: ceil(f_s/1000) * max(# of RX channels) / (# of RX support FIFOs) * max(# of bytes per sample) -#endif -#ifndef CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ -#define CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ 0 -#endif -#ifndef CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ -#define CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ 0 -#endif - -//static_assert(sizeof(tud_audio_desc_lengths) != CFG_TUD_AUDIO, "Supply audio function descriptor pack length!"); - -// Supported types of this driver: -// AUDIO_DATA_FORMAT_TYPE_I_PCM - Required definitions: CFG_TUD_AUDIO_N_CHANNELS and CFG_TUD_AUDIO_BYTES_PER_CHANNEL - #ifdef __cplusplus extern "C" { #endif @@ -368,38 +221,23 @@ extern "C" { //--------------------------------------------------------------------+ bool tud_audio_n_mounted (uint8_t func_id); -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT uint16_t tud_audio_n_available (uint8_t func_id); uint16_t tud_audio_n_read (uint8_t func_id, void* buffer, uint16_t bufsize); bool tud_audio_n_clear_ep_out_ff (uint8_t func_id); // Delete all content in the EP OUT FIFO tu_fifo_t* tud_audio_n_get_ep_out_ff (uint8_t func_id); #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING -bool tud_audio_n_clear_rx_support_ff (uint8_t func_id, uint8_t ff_idx); // Delete all content in the support RX FIFOs -uint16_t tud_audio_n_available_support_ff (uint8_t func_id, uint8_t ff_idx); -uint16_t tud_audio_n_read_support_ff (uint8_t func_id, uint8_t ff_idx, void* buffer, uint16_t bufsize); -tu_fifo_t* tud_audio_n_get_rx_support_ff (uint8_t func_id, uint8_t ff_idx); -#endif - -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN uint16_t tud_audio_n_write (uint8_t func_id, const void * data, uint16_t len); bool tud_audio_n_clear_ep_in_ff (uint8_t func_id); // Delete all content in the EP IN FIFO tu_fifo_t* tud_audio_n_get_ep_in_ff (uint8_t func_id); #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING -uint16_t tud_audio_n_flush_tx_support_ff (uint8_t func_id); // Force all content in the support TX FIFOs to be written into EP SW FIFO -bool tud_audio_n_clear_tx_support_ff (uint8_t func_id, uint8_t ff_idx); -uint16_t tud_audio_n_write_support_ff (uint8_t func_id, uint8_t ff_idx, const void * data, uint16_t len); -tu_fifo_t* tud_audio_n_get_tx_support_ff (uint8_t func_id, uint8_t ff_idx); -#endif - #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP bool tud_audio_int_n_write (uint8_t func_id, const audio_interrupt_data_t * data); #endif - //--------------------------------------------------------------------+ // Application API (Interface0) //--------------------------------------------------------------------+ @@ -408,35 +246,21 @@ static inline bool tud_audio_mounted (void); // RX API -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT static inline uint16_t tud_audio_available (void); static inline bool tud_audio_clear_ep_out_ff (void); // Delete all content in the EP OUT FIFO static inline uint16_t tud_audio_read (void* buffer, uint16_t bufsize); static inline tu_fifo_t* tud_audio_get_ep_out_ff (void); #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING -static inline bool tud_audio_clear_rx_support_ff (uint8_t ff_idx); -static inline uint16_t tud_audio_available_support_ff (uint8_t ff_idx); -static inline uint16_t tud_audio_read_support_ff (uint8_t ff_idx, void* buffer, uint16_t bufsize); -static inline tu_fifo_t* tud_audio_get_rx_support_ff (uint8_t ff_idx); -#endif - // TX API -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN static inline uint16_t tud_audio_write (const void * data, uint16_t len); static inline bool tud_audio_clear_ep_in_ff (void); static inline tu_fifo_t* tud_audio_get_ep_in_ff (void); #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING -static inline uint16_t tud_audio_flush_tx_support_ff (void); -static inline uint16_t tud_audio_clear_tx_support_ff (uint8_t ff_idx); -static inline uint16_t tud_audio_write_support_ff (uint8_t ff_idx, const void * data, uint16_t len); -static inline tu_fifo_t* tud_audio_get_tx_support_ff (uint8_t ff_idx); -#endif - // INT CTR API #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP @@ -593,7 +417,7 @@ static inline bool tud_audio_mounted(void) // RX API -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING +#if CFG_TUD_AUDIO_ENABLE_EP_OUT static inline uint16_t tud_audio_available(void) { @@ -617,33 +441,9 @@ static inline tu_fifo_t* tud_audio_get_ep_out_ff(void) #endif -#if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING - -static inline bool tud_audio_clear_rx_support_ff(uint8_t ff_idx) -{ - return tud_audio_n_clear_rx_support_ff(0, ff_idx); -} - -static inline uint16_t tud_audio_available_support_ff(uint8_t ff_idx) -{ - return tud_audio_n_available_support_ff(0, ff_idx); -} - -static inline uint16_t tud_audio_read_support_ff(uint8_t ff_idx, void* buffer, uint16_t bufsize) -{ - return tud_audio_n_read_support_ff(0, ff_idx, buffer, bufsize); -} - -static inline tu_fifo_t* tud_audio_get_rx_support_ff(uint8_t ff_idx) -{ - return tud_audio_n_get_rx_support_ff(0, ff_idx); -} - -#endif - // TX API -#if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING +#if CFG_TUD_AUDIO_ENABLE_EP_IN static inline uint16_t tud_audio_write(const void * data, uint16_t len) { @@ -662,30 +462,6 @@ static inline tu_fifo_t* tud_audio_get_ep_in_ff(void) #endif -#if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING - -static inline uint16_t tud_audio_flush_tx_support_ff(void) -{ - return tud_audio_n_flush_tx_support_ff(0); -} - -static inline uint16_t tud_audio_clear_tx_support_ff(uint8_t ff_idx) -{ - return tud_audio_n_clear_tx_support_ff(0, ff_idx); -} - -static inline uint16_t tud_audio_write_support_ff(uint8_t ff_idx, const void * data, uint16_t len) -{ - return tud_audio_n_write_support_ff(0, ff_idx, data, len); -} - -static inline tu_fifo_t* tud_audio_get_tx_support_ff(uint8_t ff_idx) -{ - return tud_audio_n_get_tx_support_ff(0, ff_idx); -} - -#endif - #if CFG_TUD_AUDIO_ENABLE_INTERRUPT_EP static inline bool tud_audio_int_write(const audio_interrupt_data_t * data) { -- cgit v1.3.1 From 2843eb405252ba4f8475c86d346b95547fb4020c Mon Sep 17 00:00:00 2001 From: milek7 Date: Thu, 26 Jun 2025 00:03:25 +0200 Subject: audio_device: Fix data IN endpoints with implicit feedback --- src/class/audio/audio_device.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'src/class/audio') diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 11a3d4a73..a877dc900 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -1003,20 +1003,22 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint ep_fb = desc_ep->bEndpointAddress; } #endif - // Data EP - if (desc_ep->bmAttributes.usage == 0) { - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { #if CFG_TUD_AUDIO_ENABLE_EP_IN - ep_in = desc_ep->bEndpointAddress; - ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); + // Data or data with implicit feedback IN EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN + && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { + ep_in = desc_ep->bEndpointAddress; + ep_in_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_in_size); + } #endif - } else { #if CFG_TUD_AUDIO_ENABLE_EP_OUT - ep_out = desc_ep->bEndpointAddress; - ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); - #endif - } + // Data OUT EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT + && desc_ep->bmAttributes.usage == 0) { + ep_out = desc_ep->bEndpointAddress; + ep_out_size = TU_MAX(tu_edpt_packet_size(desc_ep), ep_out_size); } + #endif } } @@ -1052,10 +1054,10 @@ uint16_t audiod_open(uint8_t rhport, tusb_desc_interface_t const *itf_desc, uint if (tu_desc_type(p_desc) == TUSB_DESC_ENDPOINT) { tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { - if (desc_ep->bmAttributes.usage == 0) { - if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { - _audiod_fct[i].interval_tx = desc_ep->bInterval; - } + // For data or data with implicit feedback IN EP + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN + && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { + _audiod_fct[i].interval_tx = desc_ep->bInterval; } } } else if (tu_desc_type(p_desc) == TUSB_DESC_CS_INTERFACE && tu_desc_subtype(p_desc) == AUDIO_CS_AC_INTERFACE_OUTPUT_TERMINAL) { @@ -1227,7 +1229,8 @@ static bool audiod_set_interface(uint8_t rhport, tusb_control_request_t const *p usbd_edpt_clear_stall(rhport, ep_addr); #if CFG_TUD_AUDIO_ENABLE_EP_IN - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && desc_ep->bmAttributes.usage == 0x00)// Check if usage is data EP + // For data or data with implicit feedback IN EP + if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN && (desc_ep->bmAttributes.usage == 0 || desc_ep->bmAttributes.usage == 2)) { // Save address audio->ep_in = ep_addr; -- cgit v1.3.1