From 98fb10a724a33b545990a8593f60b5f10f030f5d Mon Sep 17 00:00:00 2001 From: Devin Auclair Date: Wed, 28 Jun 2023 14:03:18 -0400 Subject: Fix minor spelling --- src/class/msc/msc.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'src/class/msc') diff --git a/src/class/msc/msc.h b/src/class/msc/msc.h index 7f25a29ba..bbfd35a43 100644 --- a/src/class/msc/msc.h +++ b/src/class/msc/msc.h @@ -53,7 +53,7 @@ enum { }; /// \brief MassStorage Protocol. -/// \details CBI only approved to use with full-speed floopy disk & should not used with highspeed or device other than floopy +/// \details CBI only approved to use with full-speed floppy disk & should not used with highspeed or device other than floppy typedef enum { MSC_PROTOCOL_CBI = 0 , ///< Control/Bulk/Interrupt protocol (with command completion interrupt) @@ -97,7 +97,7 @@ typedef struct TU_ATTR_PACKED { uint32_t signature ; ///< Signature that helps identify this data packet as a CSW. The signature field shall contain the value 53425355h (little endian), indicating CSW. uint32_t tag ; ///< The device shall set this field to the value received in the dCBWTag of the associated CBW. - uint32_t data_residue ; ///< For Data-Out the device shall report in the dCSWDataResiduethe difference between the amount of data expected as stated in the dCBWDataTransferLength, and the actual amount of data processed by the device. For Data-In the device shall report in the dCSWDataResiduethe difference between the amount of data expected as stated in the dCBWDataTransferLengthand the actual amount of relevant data sent by the device + uint32_t data_residue ; ///< For Data-Out the device shall report in the dCSWDataResidue the difference between the amount of data expected as stated in the dCBWDataTransferLength, and the actual amount of data processed by the device. For Data-In the device shall report in the dCSWDataResiduethe difference between the amount of data expected as stated in the dCBWDataTransferLengthand the actual amount of relevant data sent by the device uint8_t status ; ///< indicates the success or failure of the command. Values from \ref msc_csw_status_t }msc_csw_t; @@ -120,14 +120,14 @@ typedef enum SCSI_CMD_REQUEST_SENSE = 0x03, ///< The SCSI Request Sense command is part of the SCSI computer protocol standard. This command is used to obtain sense data -- status/error information -- from a target device. SCSI_CMD_READ_FORMAT_CAPACITY = 0x23, ///< The command allows the Host to request a list of the possible format capacities for an installed writable media. This command also has the capability to report the writable capacity for a media when it is installed SCSI_CMD_READ_10 = 0x28, ///< The READ (10) command requests that the device server read the specified logical block(s) and transfer them to the data-in buffer. - SCSI_CMD_WRITE_10 = 0x2A, ///< The WRITE (10) command requests thatthe device server transfer the specified logical block(s) from the data-out buffer and write them. + SCSI_CMD_WRITE_10 = 0x2A, ///< The WRITE (10) command requests that the device server transfer the specified logical block(s) from the data-out buffer and write them. }scsi_cmd_type_t; /// SCSI Sense Key typedef enum { SCSI_SENSE_NONE = 0x00, ///< no specific Sense Key. This would be the case for a successful command - SCSI_SENSE_RECOVERED_ERROR = 0x01, ///< ndicates the last command completed successfully with some recovery action performed by the disc drive. + SCSI_SENSE_RECOVERED_ERROR = 0x01, ///< Indicates the last command completed successfully with some recovery action performed by the disc drive. SCSI_SENSE_NOT_READY = 0x02, ///< Indicates the logical unit addressed cannot be accessed. SCSI_SENSE_MEDIUM_ERROR = 0x03, ///< Indicates the command terminated with a non-recovered error condition. SCSI_SENSE_HARDWARE_ERROR = 0x04, ///< Indicates the disc drive detected a nonrecoverable hardware failure while performing the command or during a self test. @@ -138,7 +138,7 @@ typedef enum SCSI_SENSE_ABORTED_COMMAND = 0x0b, ///< Indicates the disc drive aborted the command. SCSI_SENSE_EQUAL = 0x0c, ///< Indicates a SEARCH DATA command has satisfied an equal comparison. SCSI_SENSE_VOLUME_OVERFLOW = 0x0d, ///< Indicates a buffered peripheral device has reached the end of medium partition and data remains in the buffer that has not been written to the medium. - SCSI_SENSE_MISCOMPARE = 0x0e ///< ndicates that the source data did not match the data read from the medium. + SCSI_SENSE_MISCOMPARE = 0x0e ///< Indicates that the source data did not match the data read from the medium. }scsi_sense_key_type_t; //--------------------------------------------------------------------+ -- cgit v1.3.1 From 77495cf119c89c3091e7ab05773ebce19988da86 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 20 Jul 2023 17:06:57 +0700 Subject: improve logging, allow easier to turn off usbd, driver logging can be useful when focusing on let's say usbh --- src/class/msc/msc_device.c | 43 +++++++++++---------- src/device/usbd.c | 93 ++++++++++++++++++++++------------------------ src/device/usbd_control.c | 9 ++--- src/device/usbd_pvt.h | 9 ++++- src/host/usbh.c | 34 +++++++++-------- 5 files changed, 97 insertions(+), 91 deletions(-) (limited to 'src/class/msc') diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 159a11259..a409c4e27 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -34,13 +34,16 @@ #include "msc_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_MSC_LOG_LEVEL + #define CFG_TUD_MSC_LOG_LEVEL 2 +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_MSC_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ - -// Can be selectively disabled to reduce logging when troubleshooting other driver -#define MSC_DEBUG 2 - enum { MSC_STAGE_CMD = 0, @@ -164,7 +167,7 @@ uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { if ( block_count ) { - TU_LOG(MSC_DEBUG, " SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); + TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; }else { @@ -174,22 +177,22 @@ uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { if ( SCSI_CMD_READ_10 == cbw->command[0] && !is_data_in(cbw->dir) ) { - TU_LOG(MSC_DEBUG, " SCSI case 10 (Ho <> Di)\r\n"); + TU_LOG_DRV(" SCSI case 10 (Ho <> Di)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else if ( SCSI_CMD_WRITE_10 == cbw->command[0] && is_data_in(cbw->dir) ) { - TU_LOG(MSC_DEBUG, " SCSI case 8 (Hi <> Do)\r\n"); + TU_LOG_DRV(" SCSI case 8 (Hi <> Do)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } else if ( 0 == block_count ) { - TU_LOG(MSC_DEBUG, " SCSI case 4 Hi > Dn (READ10) or case 9 Ho > Dn (WRITE10) \r\n"); + TU_LOG_DRV(" SCSI case 4 Hi > Dn (READ10) or case 9 Ho > Dn (WRITE10) \r\n"); status = MSC_CSW_STATUS_FAILED; } else if ( cbw->total_bytes / block_count == 0 ) { - TU_LOG(MSC_DEBUG, " Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); + TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } } @@ -352,7 +355,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t switch ( request->bRequest ) { case MSC_REQ_RESET: - TU_LOG(MSC_DEBUG, " MSC BOT Reset\r\n"); + TU_LOG_DRV(" MSC BOT Reset\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 0); // driver state reset @@ -363,7 +366,7 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t case MSC_REQ_GET_MAX_LUN: { - TU_LOG(MSC_DEBUG, " MSC Get Max Lun\r\n"); + TU_LOG_DRV(" MSC Get Max Lun\r\n"); TU_VERIFY(request->wValue == 0 && request->wLength == 1); uint8_t maxlun = 1; @@ -400,7 +403,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( !(xferred_bytes == sizeof(msc_cbw_t) && p_cbw->signature == MSC_CBW_SIGNATURE) ) { - TU_LOG(MSC_DEBUG, " SCSI CBW is not valid\r\n"); + TU_LOG_DRV(" SCSI CBW is not valid\r\n"); // BOT 6.6.1 If CBW is not valid stall both endpoints until reset recovery p_msc->stage = MSC_STAGE_NEED_RESET; @@ -412,7 +415,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t return false; } - TU_LOG(MSC_DEBUG, " SCSI Command [Lun%u]: %s\r\n", p_cbw->lun, tu_lookup_find(&_msc_scsi_cmd_table, p_cbw->command[0])); + TU_LOG_DRV(" SCSI Command [Lun%u]: %s\r\n", p_cbw->lun, tu_lookup_find(&_msc_scsi_cmd_table, p_cbw->command[0])); //TU_LOG_MEM(MSC_DEBUG, p_cbw, xferred_bytes, 2); p_csw->signature = MSC_CSW_SIGNATURE; @@ -457,7 +460,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { if (p_cbw->total_bytes > sizeof(_mscd_buf)) { - TU_LOG(MSC_DEBUG, " SCSI reject non READ10/WRITE10 with large data\r\n"); + TU_LOG_DRV(" SCSI reject non READ10/WRITE10 with large data\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); }else { @@ -479,7 +482,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( resplen < 0 ) { // unsupported command - TU_LOG(MSC_DEBUG, " SCSI unsupported or failed command\r\n"); + TU_LOG_DRV(" SCSI unsupported or failed command\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); } else if (resplen == 0) @@ -514,7 +517,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t break; case MSC_STAGE_DATA: - TU_LOG(MSC_DEBUG, " SCSI Data [Lun%u]\r\n", p_cbw->lun); + TU_LOG_DRV(" SCSI Data [Lun%u]\r\n", p_cbw->lun); //TU_LOG_MEM(MSC_DEBUG, _mscd_buf, xferred_bytes, 2); if (SCSI_CMD_READ_10 == p_cbw->command[0]) @@ -546,7 +549,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( cb_result < 0 ) { // unsupported command - TU_LOG(MSC_DEBUG, " SCSI unsupported command\r\n"); + TU_LOG_DRV(" SCSI unsupported command\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); }else { @@ -575,7 +578,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // Wait for the Status phase to complete if( (ep_addr == p_msc->ep_in) && (xferred_bytes == sizeof(msc_csw_t)) ) { - TU_LOG(MSC_DEBUG, " SCSI Status [Lun%u] = %u\r\n", p_cbw->lun, p_csw->status); + TU_LOG_DRV(" SCSI Status [Lun%u] = %u\r\n", p_cbw->lun, p_csw->status); // TU_LOG_MEM(MSC_DEBUG, p_csw, xferred_bytes, 2); // Invoke complete callback if defined @@ -845,7 +848,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) if ( nbytes < 0 ) { // negative means error -> endpoint is stalled & status in CSW set to failed - TU_LOG(MSC_DEBUG, " tud_msc_read10_cb() return -1\r\n"); + TU_LOG_DRV(" tud_msc_read10_cb() return -1\r\n"); // set sense set_sense_medium_not_present(p_cbw->lun); @@ -907,7 +910,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 if ( nbytes < 0 ) { // negative means error -> failed this scsi op - TU_LOG(MSC_DEBUG, " tud_msc_write10_cb() return -1\r\n"); + TU_LOG_DRV(" tud_msc_write10_cb() return -1\r\n"); // update actual byte before failed p_msc->xferred_len += xferred_bytes; diff --git a/src/device/usbd.c b/src/device/usbd.c index 44c2530ce..9429cf664 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -43,9 +43,6 @@ #define CFG_TUD_TASK_QUEUE_SZ 16 #endif -// Debug level of USBD -#define USBD_DBG 2 - //--------------------------------------------------------------------+ // Device Data //--------------------------------------------------------------------+ @@ -81,7 +78,7 @@ tu_static usbd_device_t _usbd_dev; //--------------------------------------------------------------------+ // Class Driver //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL #define DRIVER_NAME(_name) .name = _name, #else #define DRIVER_NAME(_name) @@ -308,7 +305,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t event, //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL tu_static char const* const _usbd_event_str[DCD_EVENT_COUNT] = { "Invalid" , @@ -330,7 +327,7 @@ void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback) usbd_class_driver_t const * driver = get_driver(i); if ( driver && driver->control_xfer_cb == callback ) { - TU_LOG(USBD_DBG, " %s control complete\r\n", driver->name); + TU_LOG_USBD(" %s control complete\r\n", driver->name); return; } } @@ -396,10 +393,10 @@ bool tud_init (uint8_t rhport) // skip if already initialized if ( tud_inited() ) return true; - TU_LOG(USBD_DBG, "USBD init on controller %u\r\n", rhport); - TU_LOG_INT(USBD_DBG, sizeof(usbd_device_t)); - TU_LOG_INT(USBD_DBG, sizeof(tu_fifo_t)); - TU_LOG_INT(USBD_DBG, sizeof(tu_edpt_stream_t)); + TU_LOG_USBD("USBD init on controller %u\r\n", rhport); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t)); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t)); + TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_edpt_stream_t)); tu_varclr(&_usbd_dev); @@ -424,7 +421,7 @@ bool tud_init (uint8_t rhport) { usbd_class_driver_t const * driver = get_driver(i); TU_ASSERT(driver); - TU_LOG(USBD_DBG, "%s init\r\n", driver->name); + TU_LOG_USBD("%s init\r\n", driver->name); driver->init(); } @@ -496,21 +493,21 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) dcd_event_t event; if ( !osal_queue_receive(_usbd_q, &event, timeout_ms) ) return; -#if CFG_TUSB_DEBUG >= 2 - if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG(USBD_DBG, "\r\n"); // extra line for setup - TU_LOG(USBD_DBG, "USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED"); +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL + if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG_USBD("\r\n"); // extra line for setup + TU_LOG_USBD("USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED"); #endif switch ( event.event_id ) { case DCD_EVENT_BUS_RESET: - TU_LOG(USBD_DBG, ": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]); + TU_LOG_USBD(": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]); usbd_reset(event.rhport); _usbd_dev.speed = event.bus_reset.speed; break; case DCD_EVENT_UNPLUGGED: - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD("\r\n"); usbd_reset(event.rhport); // invoke callback @@ -518,8 +515,8 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) break; case DCD_EVENT_SETUP_RECEIVED: - TU_LOG_PTR(USBD_DBG, &event.setup_received); - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_PTR(CFG_TUD_LOG_LEVEL, &event.setup_received); + TU_LOG_USBD("\r\n"); // Mark as connected after receiving 1st setup packet. // But it is easier to set it every time instead of wasting time to check then set @@ -534,7 +531,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) // Process control request if ( !process_control_request(event.rhport, &event.setup_received) ) { - TU_LOG(USBD_DBG, " Stall EP0\r\n"); + TU_LOG_USBD(" Stall EP0\r\n"); // Failed -> stall both control endpoint IN and OUT dcd_edpt_stall(event.rhport, 0); dcd_edpt_stall(event.rhport, 0 | TUSB_DIR_IN_MASK); @@ -548,7 +545,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const ep_dir = tu_edpt_dir(ep_addr); - TU_LOG(USBD_DBG, "on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len); + TU_LOG_USBD("on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len); _usbd_dev.ep_status[epnum][ep_dir].busy = 0; _usbd_dev.ep_status[epnum][ep_dir].claimed = 0; @@ -563,7 +560,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) usbd_class_driver_t const * driver = get_driver( _usbd_dev.ep2drv[epnum][ep_dir] ); TU_ASSERT(driver, ); - TU_LOG(USBD_DBG, " %s xfer callback\r\n", driver->name); + TU_LOG_USBD(" %s xfer callback\r\n", driver->name); driver->xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); } } @@ -575,27 +572,27 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) // e.g suspend -> resume -> unplug/plug. Skip suspend/resume if not connected if ( _usbd_dev.connected ) { - TU_LOG(USBD_DBG, ": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en); + TU_LOG_USBD(": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en); if (tud_suspend_cb) tud_suspend_cb(_usbd_dev.remote_wakeup_en); }else { - TU_LOG(USBD_DBG, " Skipped\r\n"); + TU_LOG_USBD(" Skipped\r\n"); } break; case DCD_EVENT_RESUME: if ( _usbd_dev.connected ) { - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD("\r\n"); if (tud_resume_cb) tud_resume_cb(); }else { - TU_LOG(USBD_DBG, " Skipped\r\n"); + TU_LOG_USBD(" Skipped\r\n"); } break; case USBD_EVENT_FUNC_CALL: - TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD("\r\n"); if ( event.func_call.func ) event.func_call.func(event.func_call.param); break; @@ -620,7 +617,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) static bool invoke_class_control(uint8_t rhport, usbd_class_driver_t const * driver, tusb_control_request_t const * request) { usbd_control_set_complete_callback(driver->control_xfer_cb); - TU_LOG(USBD_DBG, " %s control request\r\n", driver->name); + TU_LOG_USBD(" %s control request\r\n", driver->name); return driver->control_xfer_cb(rhport, CONTROL_STAGE_SETUP, request); } @@ -641,11 +638,11 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const return tud_vendor_control_xfer_cb(rhport, CONTROL_STAGE_SETUP, p_request); } -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL if (TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && p_request->bRequest <= TUSB_REQ_SYNCH_FRAME) { - TU_LOG(USBD_DBG, " %s", tu_str_std_request[p_request->bRequest]); - if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG(USBD_DBG, "\r\n"); + TU_LOG_USBD(" %s", tu_str_std_request[p_request->bRequest]); + if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG_USBD("\r\n"); } #endif @@ -701,7 +698,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const if ( _usbd_dev.cfg_num ) { // already configured: need to clear all endpoints and driver first - TU_LOG(USBD_DBG, " Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); + TU_LOG_USBD(" Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num); // close all non-control endpoints, cancel all pending transfers if any dcd_edpt_close_all(rhport); @@ -730,7 +727,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Only support remote wakeup for device feature TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); - TU_LOG(USBD_DBG, " Enable Remote Wakeup\r\n"); + TU_LOG_USBD(" Enable Remote Wakeup\r\n"); // Host may enable remote wake up before suspending especially HID device _usbd_dev.remote_wakeup_en = true; @@ -741,7 +738,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Only support remote wakeup for device feature TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); - TU_LOG(USBD_DBG, " Disable Remote Wakeup\r\n"); + TU_LOG_USBD(" Disable Remote Wakeup\r\n"); // Host may disable remote wake up after resuming _usbd_dev.remote_wakeup_en = false; @@ -924,7 +921,7 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) if ( (sizeof(tusb_desc_interface_t) <= drv_len) && (drv_len <= remaining_len) ) { // Open successfully - TU_LOG(USBD_DBG, " %s opened\r\n", driver->name); + TU_LOG_USBD(" %s opened\r\n", driver->name); // Some drivers use 2 or more interfaces but may not have IAD e.g MIDI (always) or // BTH (even CDC) with class in device descriptor (single interface) @@ -983,7 +980,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const { case TUSB_DESC_DEVICE: { - TU_LOG(USBD_DBG, " Device\r\n"); + TU_LOG_USBD(" Device\r\n"); void* desc_device = (void*) (uintptr_t) tud_descriptor_device_cb(); @@ -1007,7 +1004,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const case TUSB_DESC_BOS: { - TU_LOG(USBD_DBG, " BOS\r\n"); + TU_LOG_USBD(" BOS\r\n"); // requested by host if USB > 2.0 ( i.e 2.1 or 3.x ) if (!tud_descriptor_bos_cb) return false; @@ -1029,12 +1026,12 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const if ( desc_type == TUSB_DESC_CONFIGURATION ) { - TU_LOG(USBD_DBG, " Configuration[%u]\r\n", desc_index); + TU_LOG_USBD(" Configuration[%u]\r\n", desc_index); desc_config = (uintptr_t) tud_descriptor_configuration_cb(desc_index); }else { // Host only request this after getting Device Qualifier descriptor - TU_LOG(USBD_DBG, " Other Speed Configuration\r\n"); + TU_LOG_USBD(" Other Speed Configuration\r\n"); TU_VERIFY( tud_descriptor_other_speed_configuration_cb ); desc_config = (uintptr_t) tud_descriptor_other_speed_configuration_cb(desc_index); } @@ -1050,7 +1047,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const case TUSB_DESC_STRING: { - TU_LOG(USBD_DBG, " String[%u]\r\n", desc_index); + TU_LOG_USBD(" String[%u]\r\n", desc_index); // String Descriptor always uses the desc set from user uint8_t const* desc_str = (uint8_t const*) tud_descriptor_string_cb(desc_index, tu_le16toh(p_request->wIndex)); @@ -1063,7 +1060,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const case TUSB_DESC_DEVICE_QUALIFIER: { - TU_LOG(USBD_DBG, " Device Qualifier\r\n"); + TU_LOG_USBD(" Device Qualifier\r\n"); TU_VERIFY( tud_descriptor_device_qualifier_cb ); @@ -1248,7 +1245,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // TODO skip ready() check for now since enumeration also use this API // TU_VERIFY(tud_ready()); - TU_LOG(USBD_DBG, " Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes); + TU_LOG_USBD(" Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes); // Attempt to transfer on a busy endpoint, sound like an race condition ! TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0); @@ -1265,7 +1262,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t // DCD error, mark endpoint as ready to allow next transfer _usbd_dev.ep_status[epnum][dir].busy = 0; _usbd_dev.ep_status[epnum][dir].claimed = 0; - TU_LOG(USBD_DBG, "FAILED\r\n"); + TU_LOG_USBD("FAILED\r\n"); TU_BREAKPOINT(); return false; } @@ -1282,7 +1279,7 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - TU_LOG(USBD_DBG, " Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes); + TU_LOG_USBD(" Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes); // Attempt to transfer on a busy endpoint, sound like an race condition ! TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0); @@ -1293,14 +1290,14 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes)) { - TU_LOG(USBD_DBG, "OK\r\n"); + TU_LOG_USBD("OK\r\n"); return true; }else { // DCD error, mark endpoint as ready to allow next transfer _usbd_dev.ep_status[epnum][dir].busy = 0; _usbd_dev.ep_status[epnum][dir].claimed = 0; - TU_LOG(USBD_DBG, "failed\r\n"); + TU_LOG_USBD("failed\r\n"); TU_BREAKPOINT(); return false; } @@ -1326,7 +1323,7 @@ void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr) // only stalled if currently cleared if ( !_usbd_dev.ep_status[epnum][dir].stalled ) { - TU_LOG(USBD_DBG, " Stall EP %02X\r\n", ep_addr); + TU_LOG_USBD(" Stall EP %02X\r\n", ep_addr); dcd_edpt_stall(rhport, ep_addr); _usbd_dev.ep_status[epnum][dir].stalled = 1; _usbd_dev.ep_status[epnum][dir].busy = 1; @@ -1343,7 +1340,7 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) // only clear if currently stalled if ( _usbd_dev.ep_status[epnum][dir].stalled ) { - TU_LOG(USBD_DBG, " Clear Stall EP %02X\r\n", ep_addr); + TU_LOG_USBD(" Clear Stall EP %02X\r\n", ep_addr); dcd_edpt_clear_stall(rhport, ep_addr); _usbd_dev.ep_status[epnum][dir].stalled = 0; _usbd_dev.ep_status[epnum][dir].busy = 0; @@ -1371,7 +1368,7 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) rhport = _usbd_rhport; TU_ASSERT(dcd_edpt_close, /**/); - TU_LOG(USBD_DBG, " CLOSING Endpoint: 0x%02X\r\n", ep_addr); + TU_LOG_USBD(" CLOSING Endpoint: 0x%02X\r\n", ep_addr); uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index 2afe967b5..c580e6ecf 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -32,10 +32,7 @@ #include "tusb.h" #include "device/usbd_pvt.h" -// Debug level of USBD Control -#define USBD_CONTROL_DEBUG 2 - -#if CFG_TUSB_DEBUG >= USBD_CONTROL_DEBUG +#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL extern void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback); #endif @@ -191,7 +188,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result { TU_VERIFY(_ctrl_xfer.buffer); memcpy(_ctrl_xfer.buffer, _usbd_ctrl_buf, xferred_bytes); - TU_LOG_MEM(USBD_CONTROL_DEBUG, _usbd_ctrl_buf, xferred_bytes, 2); + TU_LOG_MEM(CFG_TUD_LOG_LEVEL, _usbd_ctrl_buf, xferred_bytes, 2); } _ctrl_xfer.total_xferred += (uint16_t) xferred_bytes; @@ -208,7 +205,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result // callback can still stall control in status phase e.g out data does not make sense if ( _ctrl_xfer.complete_cb ) { - #if CFG_TUSB_DEBUG >= USBD_CONTROL_DEBUG + #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL usbd_driver_print_control_complete_name(_ctrl_xfer.complete_cb); #endif diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 8393d3469..940b2858b 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -33,13 +33,20 @@ extern "C" { #endif +// Level where CFG_TUSB_DEBUG must be at least for USBD is logged +#ifndef CFG_TUD_LOG_LEVEL +#define CFG_TUD_LOG_LEVEL 2 +#endif + +#define TU_LOG_USBD(...) TU_LOG(CFG_TUD_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // Class Driver API //--------------------------------------------------------------------+ typedef struct { - #if CFG_TUSB_DEBUG >= 2 + #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL char const* name; #endif diff --git a/src/host/usbh.c b/src/host/usbh.c index 184bda23b..58129c16e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -38,17 +38,19 @@ //--------------------------------------------------------------------+ #ifndef CFG_TUH_TASK_QUEUE_SZ -#define CFG_TUH_TASK_QUEUE_SZ 16 + #define CFG_TUH_TASK_QUEUE_SZ 16 #endif #ifndef CFG_TUH_INTERFACE_MAX -#define CFG_TUH_INTERFACE_MAX 8 + #define CFG_TUH_INTERFACE_MAX 8 #endif -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define USBH_DEBUG 2 +// Level where CFG_TUSB_DEBUG must be at least for USBH is logged +#ifndef CFG_TUH_LOG_LEVEL + #define CFG_TUH_LOG_LEVEL 2 +#endif -#define TU_LOG_USBH(...) TU_LOG(USBH_DEBUG, __VA_ARGS__) +#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // USBH-HCD common data structure @@ -322,12 +324,12 @@ bool tuh_init(uint8_t controller_id) if ( tuh_inited() ) return true; TU_LOG_USBH("USBH init on controller %u\r\n", controller_id); - TU_LOG_INT(USBH_DEBUG, sizeof(usbh_device_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(hcd_event_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(_ctrl_xfer)); - TU_LOG_INT(USBH_DEBUG, sizeof(tuh_xfer_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(tu_fifo_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(tu_edpt_stream_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(usbh_device_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(hcd_event_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(_ctrl_xfer)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tuh_xfer_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_fifo_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_edpt_stream_t)); // Event queue _usbh_q = osal_queue_create( &_usbh_qdef ); @@ -565,7 +567,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) TU_LOG_USBH("[%u:%u] %s: ", rhport, daddr, (xfer->setup->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && xfer->setup->bRequest <= TUSB_REQ_SYNCH_FRAME) ? tu_str_std_request[xfer->setup->bRequest] : "Class Request"); - TU_LOG_PTR(USBH_DEBUG, xfer->setup); + TU_LOG_PTR(CFG_TUH_LOG_LEVEL, xfer->setup); TU_LOG_USBH("\r\n"); if (xfer->complete_cb) @@ -671,7 +673,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result if (request->wLength) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, dev_addr); - TU_LOG_MEM(USBH_DEBUG, _ctrl_xfer.buffer, xferred_bytes, 2); + TU_LOG_MEM(CFG_TUH_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); } _ctrl_xfer.actual_len = (uint16_t) xferred_bytes; @@ -1186,7 +1188,7 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu TU_LOG_USBH("Device unplugged address = %u\r\n", daddr); if (is_hub_addr(daddr)) { - TU_LOG(USBH_DEBUG, " is a HUB device %u\r\n", daddr); + TU_LOG(CFG_TUH_LOG_LEVEL, " is a HUB device %u\r\n", daddr); // Submit removed event If the device itself is a hub (un-rolled recursive) // TODO a better to unroll recursrive is using array of removing_hubs and mark it here @@ -1657,7 +1659,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur if( drv_id >= USBH_CLASS_DRIVER_COUNT ) { - TU_LOG(USBH_DEBUG, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", + TU_LOG(CFG_TUH_LOG_LEVEL, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); } } @@ -1695,7 +1697,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) if (is_hub_addr(dev_addr)) { - TU_LOG(USBH_DEBUG, "HUB address = %u is mounted\r\n", dev_addr); + TU_LOG(CFG_TUH_LOG_LEVEL, "HUB address = %u is mounted\r\n", dev_addr); }else { // Invoke callback if available -- cgit v1.3.1 From ef49b93532a7360703ae87d36cf463169f86f20b Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 15:46:21 +0700 Subject: rename CFG_TUSB_MEM_SECTION to CFG_TUD_MEM_SECTION in device stack CFG_TUD_MEM_SECTION is default to CFG_TUSB_MEM_SECTION --- hw/bsp/lpc40/family.cmake | 1 + hw/bsp/lpc40/family.mk | 3 +- lib/networking/rndis_reports.c | 2 +- src/class/audio/audio_device.c | 44 ++++++++++++------------ src/class/bth/bth_device.c | 2 +- src/class/cdc/cdc_device.c | 2 +- src/class/dfu/dfu_device.c | 2 +- src/class/hid/hid_device.c | 2 +- src/class/midi/midi_device.c | 2 +- src/class/msc/msc_device.c | 4 +-- src/class/net/ecm_rndis_device.c | 12 +++---- src/class/net/ncm_device.c | 6 ++-- src/class/usbtmc/usbtmc_device.c | 2 +- src/class/vendor/vendor_device.c | 2 +- src/class/video/video_device.c | 4 +-- src/device/usbd_control.c | 2 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 2 +- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 2 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- src/portable/microchip/pic/dcd_pic.c | 2 +- src/portable/microchip/samx7x/dcd_samx7x.c | 2 +- src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c | 2 +- src/portable/nxp/khci/dcd_khci.c | 2 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 2 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 6 ++-- src/tusb_option.h | 42 ++++++---------------- 26 files changed, 68 insertions(+), 88 deletions(-) (limited to 'src/class/msc') diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 03caa4385..54410e1a7 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -38,6 +38,7 @@ function(add_board_target BOARD_TARGET) target_compile_definitions(${BOARD_TARGET} PUBLIC __USE_LPCOPEN CORE_M4 + CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\".data.$RAM2\"\)\)\) ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR}/inc diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index 47d25b885..0fc7095f5 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -9,8 +9,7 @@ CFLAGS += \ -nostdlib \ -DCORE_M4 \ -D__USE_LPCOPEN \ - -DCFG_TUD_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUH_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ -DCFG_TUSB_MCU=OPT_MCU_LPC40XX # mcu driver cause following warnings diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index cc14f174c..60afb8615 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -43,7 +43,7 @@ static usb_eth_stat_t usb_eth_stat = { 0, 0, 0, 0 }; static uint32_t oid_packet_filter = 0x0000000; static rndis_state_t rndis_state; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t ndis_report[8] = { 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t ndis_report[8] = { 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; static const uint32_t OIDSupportedList[] = { diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index e5dbe988a..1a7ce7870 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -113,21 +113,21 @@ // EP IN software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_1; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_2; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_3; // No need for read mutex as only USB driver reads from FIFO #endif @@ -139,36 +139,36 @@ // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX]; #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // EP OUT software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_1; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_2; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_3; // No need for write mutex as only USB driver writes into FIFO #endif @@ -180,27 +180,27 @@ // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX]; #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // Control buffers -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; #if CFG_TUD_AUDIO > 1 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; #endif #if CFG_TUD_AUDIO > 2 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; #endif // Active alternate setting of interfaces @@ -217,7 +217,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; // Software encoding/decoding support FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -225,7 +225,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -233,7 +233,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -243,7 +243,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -251,7 +251,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -259,7 +259,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -416,7 +416,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; +CFG_TUD_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received); diff --git a/src/class/bth/bth_device.c b/src/class/bth/bth_device.c index f96bb3552..c5c74d26a 100755 --- a/src/class/bth/bth_device.c +++ b/src/class/bth/bth_device.c @@ -55,7 +55,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION btd_interface_t _btd_itf; +CFG_TUD_MEM_SECTION btd_interface_t _btd_itf; static bool bt_tx_data(uint8_t ep, void *data, uint16_t len) { diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 5adce521d..f658df4d0 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -76,7 +76,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION tu_static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; +CFG_TUD_MEM_SECTION tu_static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; static bool _prep_out_transaction (cdcd_interface_t* p_cdc) { diff --git a/src/class/dfu/dfu_device.c b/src/class/dfu/dfu_device.c index 464c4bd6b..bffdb8376 100644 --- a/src/class/dfu/dfu_device.c +++ b/src/class/dfu/dfu_device.c @@ -56,7 +56,7 @@ typedef struct } dfu_state_ctx_t; // Only a single dfu state is allowed -CFG_TUSB_MEM_SECTION tu_static dfu_state_ctx_t _dfu_ctx; +CFG_TUD_MEM_SECTION tu_static dfu_state_ctx_t _dfu_ctx; static void reset_state(void) { diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index 9240fe2ca..5637ea6b4 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -58,7 +58,7 @@ typedef struct tusb_hid_descriptor_hid_t const * hid_descriptor; } hidd_interface_t; -CFG_TUSB_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; +CFG_TUD_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; /*------------- Helpers -------------*/ static inline uint8_t get_index_by_itfnum(uint8_t itf_num) diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index e3e7826da..052372a93 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -82,7 +82,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION midid_interface_t _midid_itf[CFG_TUD_MIDI]; +CFG_TUD_MEM_SECTION midid_interface_t _midid_itf[CFG_TUD_MIDI]; bool tud_midi_n_mounted (uint8_t itf) { diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index a409c4e27..a602e9672 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -74,8 +74,8 @@ typedef struct uint8_t add_sense_qualifier; }mscd_interface_t; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index 8ac7cbd01..762425732 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -61,10 +61,10 @@ typedef struct #define CFG_TUD_NET_PACKET_PREFIX_LEN sizeof(rndis_data_packet_t) #define CFG_TUD_NET_PACKET_SUFFIX_LEN 0 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t received[CFG_TUD_NET_PACKET_PREFIX_LEN + CFG_TUD_NET_MTU + CFG_TUD_NET_PACKET_PREFIX_LEN]; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t transmitted[CFG_TUD_NET_PACKET_PREFIX_LEN + CFG_TUD_NET_MTU + CFG_TUD_NET_PACKET_PREFIX_LEN]; struct ecm_notify_struct @@ -94,8 +94,8 @@ tu_static const struct ecm_notify_struct ecm_notify_csc = .uplink = 9728000, }; -// TODO remove CFG_TUSB_MEM_SECTION, control internal buffer is already in this special section -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union +// TODO remove CFG_TUD_MEM_SECTION, control internal buffer is already in this special section +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union { uint8_t rndis_buf[120]; struct ecm_notify_struct ecm_buf; @@ -104,8 +104,8 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -// TODO remove CFG_TUSB_MEM_SECTION -CFG_TUSB_MEM_SECTION tu_static netd_interface_t _netd_itf; +// TODO remove CFG_TUD_MEM_SECTION +CFG_TUD_MEM_SECTION tu_static netd_interface_t _netd_itf; tu_static bool can_xmit; diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 9e9580249..611dc3348 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -130,7 +130,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { .wLength = sizeof(ntb_parameters_t), .bmNtbFormatsSupported = 0x01, .dwNtbInMaxSize = CFG_TUD_NCM_IN_NTB_MAX_SIZE, @@ -145,9 +145,9 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_par .wNtbOutMaxDatagrams = 0 }; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static transmit_ntb_t transmit_ntb[2]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static transmit_ntb_t transmit_ntb[2]; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t receive_ntb[CFG_TUD_NCM_OUT_NTB_MAX_SIZE]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t receive_ntb[CFG_TUD_NCM_OUT_NTB_MAX_SIZE]; tu_static ncm_interface_t ncm_interface; diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 4e320a778..573654d58 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -143,7 +143,7 @@ typedef struct usbtmc_capabilities_specific_t const * capabilities; } usbtmc_interface_state_t; -CFG_TUSB_MEM_SECTION tu_static usbtmc_interface_state_t usbtmc_state = +CFG_TUD_MEM_SECTION tu_static usbtmc_interface_state_t usbtmc_state = { .itf_id = 0xFF, }; diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 93596ee33..389a29696 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -59,7 +59,7 @@ typedef struct CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_VENDOR_EPSIZE]; } vendord_interface_t; -CFG_TUSB_MEM_SECTION tu_static vendord_interface_t _vendord_itf[CFG_TUD_VENDOR]; +CFG_TUD_MEM_SECTION tu_static vendord_interface_t _vendord_itf[CFG_TUD_VENDOR]; #define ITF_MEM_RESET_SIZE offsetof(vendord_interface_t, rx_ff) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 91f452afc..e6fadf41b 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -130,8 +130,8 @@ typedef struct TU_ATTR_PACKED { //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION tu_static videod_interface_t _videod_itf[CFG_TUD_VIDEO]; -CFG_TUSB_MEM_SECTION tu_static videod_streaming_interface_t _videod_streaming_itf[CFG_TUD_VIDEO_STREAMING]; +CFG_TUD_MEM_SECTION tu_static videod_interface_t _videod_itf[CFG_TUD_VIDEO]; +CFG_TUD_MEM_SECTION tu_static videod_streaming_interface_t _videod_streaming_itf[CFG_TUD_VIDEO_STREAMING]; tu_static uint8_t const _cap_get = 0x1u; /* support for GET */ tu_static uint8_t const _cap_get_set = 0x3u; /* support for GET and SET */ diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index c580e6ecf..76d062e40 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -55,7 +55,7 @@ typedef struct tu_static usbd_control_xfer_t _ctrl_xfer; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE]; //--------------------------------------------------------------------+ diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 95dfda49c..f02415904 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -51,7 +51,7 @@ extern int8_t board_ft9xx_vbus(void); extern int board_uart_write(void const *buf, int len); // Static array to store an incoming SETUP request for processing by tinyusb. -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t _ft9xx_setup_packet[8]; struct ft9xx_xfer_state diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 37265df8b..9327e09d8 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -116,7 +116,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index f50550d33..f9ec666e5 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -175,7 +175,7 @@ typedef struct { dcd_qtd_t qtd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32); }dcd_data_t; -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048) +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(2048) static dcd_data_t _dcd_data; //--------------------------------------------------------------------+ diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 6986c8317..ccc27c3c9 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -189,7 +189,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) volatile static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) volatile static dcd_data_t _dcd; #if TU_PIC_INT_SIZE == 4 TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 2bbb345d6..9586df84d 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -77,7 +77,7 @@ static tusb_speed_t get_speed(void); static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix); // DMA descriptors shouldn't be placed in ITCM ! -CFG_TUSB_MEM_SECTION static dma_desc_t dma_desc[6]; +CFG_TUD_MEM_SECTION static dma_desc_t dma_desc[6]; static xfer_ctl_t xfer_status[EP_MAX]; diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index 39b09db68..c3d0c7297 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -110,7 +110,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 52f4145f2..5c65ea33d 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -114,7 +114,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 86149afd8..b880c2870 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -92,7 +92,7 @@ typedef struct } dcd_data_t; -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(128) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(128) static dcd_data_t _dcd; //--------------------------------------------------------------------+ diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 5368ef868..7ca698a93 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -176,11 +176,11 @@ typedef struct // EP list must be 256-byte aligned // Some MCU controller may require this variable to be placed in specific SRAM region. // For example: LPC55s69 port1 Highspeed must be USB_RAM (0x40100000) -// Use CFG_TUSB_MEM_SECTION to place it accordingly. -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; +// Use CFG_TUD_MEM_SECTION to place it accordingly. +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; // Dummy buffer to fix ZLPs overwriting the buffer (probably an USB/DMA controller bug) -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; //--------------------------------------------------------------------+ // Multiple Controllers diff --git a/src/tusb_option.h b/src/tusb_option.h index c792efe6a..7a4cfe51c 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -295,15 +295,14 @@ #define CFG_TUSB_DEBUG 0 #endif -// TODO MEM_SECTION can be different for host and device controller -// should use CFG_TUD_MEM_SECTION, CFG_TUH_MEM_SECTION +// Memory section for placing buffer used for usb transferring. If MEM_SECTION is different for +// host and device use: CFG_TUD_MEM_SECTION, CFG_TUH_MEM_SECTION instead #ifndef CFG_TUSB_MEM_SECTION #define CFG_TUSB_MEM_SECTION #endif -// alignment requirement of buffer used for endpoint transferring -// TODO MEM_ALIGN can be different for host and device controller -// should use CFG_TUD_MEM_ALIGN, CFG_TUH_MEM_ALIGN +// Alignment requirement of buffer used for usb transferring. if MEM_ALIGN is different for +// host and device controller use: CFG_TUD_MEM_ALIGN, CFG_TUH_MEM_ALIGN instead #ifndef CFG_TUSB_MEM_ALIGN #define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4) #endif @@ -321,24 +320,14 @@ // Device Options (Default) //-------------------------------------------------------------------- -// Attribute to place data in accessible RAM for device controller -// default to CFG_TUSB_MEM_SECTION for backward-compatible +// Attribute to place data in accessible RAM for device controller (default: CFG_TUSB_MEM_SECTION) #ifndef CFG_TUD_MEM_SECTION - #ifdef CFG_TUSB_MEM_SECTION - #define CFG_TUD_MEM_SECTION CFG_TUSB_MEM_SECTION - #else - #define CFG_TUD_MEM_SECTION - #endif + #define CFG_TUD_MEM_SECTION CFG_TUSB_MEM_SECTION #endif -// Attribute to align memory for device controller -// default to CFG_TUSB_MEM_ALIGN for backward-compatible +// Attribute to align memory for device controller (default: CFG_TUSB_MEM_ALIGN) #ifndef CFG_TUD_MEM_ALIGN - #ifdef CFG_TUSB_MEM_ALIGN - #define CFG_TUD_MEM_ALIGN CFG_TUSB_MEM_ALIGN - #else - #define CFG_TUD_MEM_ALIGN TU_ATTR_ALIGNED(4) - #endif + #define CFG_TUD_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif #ifndef CFG_TUD_ENDPOINT0_SIZE @@ -419,23 +408,14 @@ #endif #endif // CFG_TUH_ENABLED -// Attribute to place data in accessible RAM for host controller -// default to CFG_TUSB_MEM_SECTION for backward-compatible +// Attribute to place data in accessible RAM for host controller (default: CFG_TUSB_MEM_SECTION) #ifndef CFG_TUH_MEM_SECTION - #ifdef CFG_TUSB_MEM_SECTION - #define CFG_TUH_MEM_SECTION CFG_TUSB_MEM_SECTION - #else - #define CFG_TUH_MEM_SECTION - #endif + #define CFG_TUH_MEM_SECTION CFG_TUSB_MEM_SECTION #endif // Attribute to align memory for host controller #ifndef CFG_TUH_MEM_ALIGN - #ifdef CFG_TUSB_MEM_ALIGN - #define CFG_TUH_MEM_ALIGN CFG_TUSB_MEM_ALIGN - #else - #define CFG_TUH_MEM_ALIGN TU_ATTR_ALIGNED(4) - #endif + #define CFG_TUH_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif //------------- CLASS -------------// -- cgit v1.3.1 From 979bf32266d379ec493ad31001b815d6a597b91e Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Aug 2023 15:34:18 +0700 Subject: default class driver log level to CFG_TUH/TUD_LOG_LEVEL allow application to selectively disable usbd/usbh or driver log --- src/class/cdc/cdc_device.c | 15 +++++++++++---- src/class/cdc/cdc_host.c | 9 ++++++--- src/class/dfu/dfu_device.c | 11 +++++++++-- src/class/dfu/dfu_rt_device.c | 13 ++++++++++--- src/class/hid/hid_host.c | 8 +++++--- src/class/msc/msc_device.c | 2 +- src/class/msc/msc_host.c | 19 +++++++++++-------- src/class/net/ncm_device.c | 11 +++++++++-- src/class/video/video_device.c | 23 +++++++++++++++-------- src/host/usbh.c | 7 ------- src/host/usbh_classdriver.h | 7 +++++++ 11 files changed, 84 insertions(+), 41 deletions(-) (limited to 'src/class/msc') diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index f658df4d0..70d9c2e24 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -33,6 +33,13 @@ #include "cdc_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_CDC_LOG_LEVEL + #define CFG_TUD_CDC_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_CDC_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -353,7 +360,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t case CDC_REQUEST_SET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { - TU_LOG2(" Set Line Coding\r\n"); + TU_LOG_DRV(" Set Line Coding\r\n"); tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } else if ( stage == CONTROL_STAGE_ACK) @@ -365,7 +372,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t case CDC_REQUEST_GET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { - TU_LOG2(" Get Line Coding\r\n"); + TU_LOG_DRV(" Get Line Coding\r\n"); tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } break; @@ -390,7 +397,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t // Disable fifo overwriting if DTR bit is set tu_fifo_set_overwritable(&p_cdc->tx_ff, !dtr); - TU_LOG2(" Set Control Line State: DTR = %d, RTS = %d\r\n", dtr, rts); + TU_LOG_DRV(" Set Control Line State: DTR = %d, RTS = %d\r\n", dtr, rts); // Invoke callback if ( tud_cdc_line_state_cb ) tud_cdc_line_state_cb(itf, dtr, rts); @@ -403,7 +410,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t } else if (stage == CONTROL_STAGE_ACK) { - TU_LOG2(" Send Break\r\n"); + TU_LOG_DRV(" Send Break\r\n"); if ( tud_cdc_send_break_cb ) tud_cdc_send_break_cb(itf, request->wValue); } break; diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index ce9f27c33..7f9ed18b3 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -33,9 +33,12 @@ #include "cdc_host.h" -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define CDCH_DEBUG 2 -#define TU_LOG_DRV(...) TU_LOG(CDCH_DEBUG, __VA_ARGS__) +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUH_CDC_LOG_LEVEL + #define CFG_TUH_CDC_LOG_LEVEL CFG_TUH_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUH_CDC_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // Host CDC Interface diff --git a/src/class/dfu/dfu_device.c b/src/class/dfu/dfu_device.c index bffdb8376..3e7c13dea 100644 --- a/src/class/dfu/dfu_device.c +++ b/src/class/dfu/dfu_device.c @@ -37,6 +37,13 @@ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_DFU_LOG_LEVEL + #define CFG_TUD_DFU_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_DFU_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -205,7 +212,7 @@ bool dfu_moded_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_reque { TU_VERIFY(request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE); - TU_LOG2(" DFU State : %s, Status: %s\r\n", tu_lookup_find(&_dfu_state_table, _dfu_ctx.state), tu_lookup_find(&_dfu_status_table, _dfu_ctx.status)); + TU_LOG_DRV(" DFU State : %s, Status: %s\r\n", tu_lookup_find(&_dfu_state_table, _dfu_ctx.state), tu_lookup_find(&_dfu_status_table, _dfu_ctx.status)); if ( request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD ) { @@ -235,7 +242,7 @@ bool dfu_moded_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_reque } else if ( request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS ) { - TU_LOG2(" DFU Request: %s\r\n", tu_lookup_find(&_dfu_request_table, request->bRequest)); + TU_LOG_DRV(" DFU Request: %s\r\n", tu_lookup_find(&_dfu_request_table, request->bRequest)); // Class request switch ( request->bRequest ) diff --git a/src/class/dfu/dfu_rt_device.c b/src/class/dfu/dfu_rt_device.c index 7b77b3f8f..a940d8d62 100644 --- a/src/class/dfu/dfu_rt_device.c +++ b/src/class/dfu/dfu_rt_device.c @@ -37,6 +37,13 @@ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_DFU_RUNTIME_LOG_LEVEL + #define CFG_TUD_DFU_RUNTIME_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_DFU_RUNTIME_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -99,7 +106,7 @@ bool dfu_rtd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request { case DFU_REQUEST_DETACH: { - TU_LOG2(" DFU RT Request: DETACH\r\n"); + TU_LOG_DRV(" DFU RT Request: DETACH\r\n"); tud_control_status(rhport, request); tud_dfu_runtime_reboot_to_dfu_cb(); } @@ -107,7 +114,7 @@ bool dfu_rtd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request case DFU_REQUEST_GETSTATUS: { - TU_LOG2(" DFU RT Request: GETSTATUS\r\n"); + TU_LOG_DRV(" DFU RT Request: GETSTATUS\r\n"); dfu_status_response_t resp; // Status = OK, Poll timeout is ignored during RT, State = APP_IDLE, IString = 0 TU_VERIFY(tu_memset_s(&resp, sizeof(resp), 0x00, sizeof(resp))==0); @@ -117,7 +124,7 @@ bool dfu_rtd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request default: { - TU_LOG2(" DFU RT Unexpected Request: %d\r\n", request->bRequest); + TU_LOG_DRV(" DFU RT Unexpected Request: %d\r\n", request->bRequest); return false; // stall unsupported request } } diff --git a/src/class/hid/hid_host.c b/src/class/hid/hid_host.c index 6abe298e5..4253170d4 100644 --- a/src/class/hid/hid_host.c +++ b/src/class/hid/hid_host.c @@ -33,10 +33,12 @@ #include "hid_host.h" -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define HIDH_DEBUG 2 -#define TU_LOG_DRV(...) TU_LOG(HIDH_DEBUG, __VA_ARGS__) +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUH_HID_LOG_LEVEL + #define CFG_TUH_HID_LOG_LEVEL CFG_TUH_LOG_LEVEL +#endif +#define TU_LOG_DRV(...) TU_LOG(CFG_TUH_HID_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index a602e9672..2589dcd2c 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -36,7 +36,7 @@ // Level where CFG_TUSB_DEBUG must be at least for this driver is logged #ifndef CFG_TUD_MSC_LOG_LEVEL - #define CFG_TUD_MSC_LOG_LEVEL 2 + #define CFG_TUD_MSC_LOG_LEVEL CFG_TUD_LOG_LEVEL #endif #define TU_LOG_DRV(...) TU_LOG(CFG_TUD_MSC_LOG_LEVEL, __VA_ARGS__) diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index d32c0adb0..a65208d69 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -33,9 +33,12 @@ #include "msc_host.h" -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define MSCH_DEBUG 2 -#define TU_LOG_MSCH(...) TU_LOG(MSCH_DEBUG, __VA_ARGS__) +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUH_MSC_LOG_LEVEL + #define CFG_TUH_MSC_LOG_LEVEL CFG_TUH_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUH_MSC_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF @@ -308,7 +311,7 @@ void msch_close(uint8_t dev_addr) msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->configured, ); - TU_LOG_MSCH(" MSCh close addr = %d\r\n", dev_addr); + TU_LOG_DRV(" MSCh close addr = %d\r\n", dev_addr); // invoke Application Callback if (p_msc->mounted) { @@ -426,7 +429,7 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) p_msc->configured = true; //------------- Get Max Lun -------------// - TU_LOG_MSCH("MSC Get Max Lun\r\n"); + TU_LOG_DRV("MSC Get Max Lun\r\n"); tusb_control_request_t const request = { .bmRequestType_bit = @@ -465,7 +468,7 @@ static void config_get_maxlun_complete (tuh_xfer_t* xfer) p_msc->max_lun++; // MAX LUN is minus 1 by specs // TODO multiple LUN support - TU_LOG_MSCH("SCSI Test Unit Ready\r\n"); + TU_LOG_DRV("SCSI Test Unit Ready\r\n"); uint8_t const lun = 0; tuh_msc_test_unit_ready(daddr, lun, config_test_unit_ready_complete, 0); } @@ -478,14 +481,14 @@ static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_d if (csw->status == 0) { // Unit is ready, read its capacity - TU_LOG_MSCH("SCSI Read Capacity\r\n"); + TU_LOG_DRV("SCSI Read Capacity\r\n"); tuh_msc_read_capacity(dev_addr, cbw->lun, (scsi_read_capacity10_resp_t*) ((void*) _msch_buffer), config_read_capacity_complete, 0); }else { // Note: During enumeration, some device fails Test Unit Ready and require a few retries // with Request Sense to start working !! // TODO limit number of retries - TU_LOG_MSCH("SCSI Request Sense\r\n"); + TU_LOG_DRV("SCSI Request Sense\r\n"); TU_ASSERT(tuh_msc_request_sense(dev_addr, cbw->lun, _msch_buffer, config_request_sense_complete, 0)); } diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 611dc3348..226c42c4e 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -34,6 +34,13 @@ #include "device/usbd_pvt.h" #include "net_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_NCM_LOG_LEVEL + #define CFG_TUD_NCM_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_NCM_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -473,13 +480,13 @@ bool tud_network_can_xmit(uint16_t size) TU_VERIFY(ncm_interface.itf_data_alt == 1); if (ncm_interface.datagram_count >= ncm_interface.max_datagrams_per_ntb) { - TU_LOG2("NTB full [by count]\r\n"); + TU_LOG_DRV("NTB full [by count]\r\n"); return false; } size_t next_datagram_offset = ncm_interface.next_datagram_offset; if (next_datagram_offset + size > ncm_interface.ntb_in_size) { - TU_LOG2("ntb full [by size]\r\n"); + TU_LOG_DRV("ntb full [by size]\r\n"); return false; } diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index e6fadf41b..abc43ccff 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -34,6 +34,13 @@ #include "video_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_VIDEO_LOG_LEVEL + #define CFG_TUD_VIDEO_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_VIDEO_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -609,17 +616,17 @@ static bool _close_vc_itf(uint8_t rhport, videod_interface_t *self) * @param[in] altnum The target alternate setting number. */ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t altnum) { - TU_LOG2(" open VC %d\n", altnum); + TU_LOG_DRV(" open VC %d\n", altnum); uint8_t const *beg = self->beg; uint8_t const *end = beg + self->len; /* The first descriptor is a video control interface descriptor. */ uint8_t const *cur = _find_desc_itf(beg, end, _desc_itfnum(beg), altnum); - TU_LOG2(" cur %d\n", cur - beg); + TU_LOG_DRV(" cur %d\n", cur - beg); TU_VERIFY(cur < end); tusb_desc_vc_itf_t const *vc = (tusb_desc_vc_itf_t const *)cur; - TU_LOG2(" bInCollection %d\n", vc->ctl.bInCollection); + TU_LOG_DRV(" bInCollection %d\n", vc->ctl.bInCollection); /* Support for up to 2 streaming interfaces only. */ TU_ASSERT(vc->ctl.bInCollection <= CFG_TUD_VIDEO_STREAMING); @@ -628,7 +635,7 @@ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t /* Advance to the next descriptor after the class-specific VC interface header descriptor. */ cur += vc->std.bLength + vc->ctl.bLength; - TU_LOG2(" bNumEndpoints %d\n", vc->std.bNumEndpoints); + TU_LOG_DRV(" bNumEndpoints %d\n", vc->std.bNumEndpoints); /* Open the notification endpoint if it exist. */ if (vc->std.bNumEndpoints) { /* Support for 1 endpoint only. */ @@ -662,7 +669,7 @@ static bool _init_vs_configuration(videod_streaming_interface_t *stm) static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint_fast8_t altnum) { uint_fast8_t i; - TU_LOG2(" reopen VS %d\n", altnum); + TU_LOG_DRV(" reopen VS %d\n", altnum); uint8_t const *desc = _videod_itf[stm->index_vc].beg; /* Close endpoints of previous settings. */ @@ -672,7 +679,7 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint uint8_t ep_adr = _desc_ep_addr(desc + ofs_ep); usbd_edpt_close(rhport, ep_adr); stm->desc.ep[i] = 0; - TU_LOG2(" close EP%02x\n", ep_adr); + TU_LOG_DRV(" close EP%02x\n", ep_adr); } /* clear transfer management information */ @@ -709,12 +716,12 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint } TU_ASSERT(usbd_edpt_open(rhport, ep)); stm->desc.ep[i] = (uint16_t) (cur - desc); - TU_LOG2(" open EP%02x\n", _desc_ep_addr(cur)); + TU_LOG_DRV(" open EP%02x\n", _desc_ep_addr(cur)); } if (altnum) { stm->state = VS_STATE_STREAMING; } - TU_LOG2(" done\n"); + TU_LOG_DRV(" done\n"); return true; } diff --git a/src/host/usbh.c b/src/host/usbh.c index c8eb91be3..49f8c78f1 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -45,13 +45,6 @@ #define CFG_TUH_INTERFACE_MAX 8 #endif -// Level where CFG_TUSB_DEBUG must be at least for USBH is logged -#ifndef CFG_TUH_LOG_LEVEL - #define CFG_TUH_LOG_LEVEL 2 -#endif - -#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) - //--------------------------------------------------------------------+ // USBH-HCD common data structure //--------------------------------------------------------------------+ diff --git a/src/host/usbh_classdriver.h b/src/host/usbh_classdriver.h index be9811641..308b4418a 100644 --- a/src/host/usbh_classdriver.h +++ b/src/host/usbh_classdriver.h @@ -35,6 +35,13 @@ extern "C" { #endif +// Level where CFG_TUSB_DEBUG must be at least for USBH is logged +#ifndef CFG_TUH_LOG_LEVEL + #define CFG_TUH_LOG_LEVEL 2 +#endif + +#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) + enum { USBH_EPSIZE_BULK_MAX = (TUH_OPT_HIGH_SPEED ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS) }; -- cgit v1.3.1