From cc626f35d212aef86b0aa7275eea016ae69b5de4 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 29 Jan 2025 15:16:02 +0100 Subject: msc_device: add async IO support. Signed-off-by: HiFiPhile --- src/class/msc/msc_device.c | 180 ++++++++++++++++++++++++++++++++------------- src/class/msc/msc_device.h | 16 ++++ 2 files changed, 145 insertions(+), 51 deletions(-) (limited to 'src/class/msc') diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index dd66bfb6f..c7c926f4e 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -52,10 +52,18 @@ enum { MSC_STAGE_NEED_RESET, }; +enum { + MSC_NEXT_OP_NONE = 0, + MSC_NEXT_OP_READ10, + MSC_NEXT_OP_WRITE10, + MSC_NEXT_OP_STATUS +}; + typedef struct { TU_ATTR_ALIGNED(4) msc_cbw_t cbw; TU_ATTR_ALIGNED(4) msc_csw_t csw; + uint8_t rhport; uint8_t itf_num; uint8_t ep_in; uint8_t ep_out; @@ -70,6 +78,10 @@ typedef struct { uint8_t sense_key; uint8_t add_sense_code; uint8_t add_sense_qualifier; +#if CFG_TUD_MSC_ASYNC_IO + uint8_t next_op; + uint32_t xferred_bytes; +#endif }mscd_interface_t; static mscd_interface_t _mscd_itf; @@ -82,31 +94,39 @@ CFG_TUD_MEM_SECTION static struct { // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_t* buffer, uint32_t bufsize); -static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc); - -static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc); -static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint32_t xferred_bytes); +static void proc_read10_cmd(mscd_interface_t* p_msc); +static void proc_read10_next(mscd_interface_t* p_msc, int32_t nbytes); +static void proc_write10_cmd(mscd_interface_t* p_msc); +static void proc_write10_new_data(mscd_interface_t* p_msc, uint32_t xferred_bytes); +static void proc_write10_next(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes); +static bool proc_stage_status(mscd_interface_t* p_msc); +#if CFG_TUD_MSC_ASYNC_IO +static void tud_msc_async_io_done_cb(void* bytes_processed); +#endif TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); } -static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) { +static inline bool send_csw(mscd_interface_t* p_msc) { // Data residue is always = host expect - actual transferred + uint8_t rhport = p_msc->rhport; p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; p_msc->stage = MSC_STAGE_STATUS_SENT; memcpy(_mscd_epbuf.buf, &p_msc->csw, sizeof(msc_csw_t)); return usbd_edpt_xfer(rhport, p_msc->ep_in , _mscd_epbuf.buf, sizeof(msc_csw_t)); } -static inline bool prepare_cbw(uint8_t rhport, mscd_interface_t* p_msc) { +static inline bool prepare_cbw(mscd_interface_t* p_msc) { + uint8_t rhport = p_msc->rhport; p_msc->stage = MSC_STAGE_CMD; return usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, sizeof(msc_cbw_t)); } -static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status) { +static void fail_scsi_op(mscd_interface_t* p_msc, uint8_t status) { msc_cbw_t const * p_cbw = &p_msc->cbw; msc_csw_t * p_csw = &p_msc->csw; + uint8_t rhport = p_msc->rhport; p_csw->status = status; p_csw->data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; @@ -177,6 +197,32 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { return status; } +static bool proc_stage_status(mscd_interface_t* p_msc) { + uint8_t rhport = p_msc->rhport; + msc_cbw_t const* p_cbw = &p_msc->cbw; + // skip status if epin is currently stalled, will do it when received Clear Stall request + if (!usbd_edpt_stalled(rhport, p_msc->ep_in)) { + if ((p_cbw->total_bytes > p_msc->xferred_len) && is_data_in(p_cbw->dir)) { + // 6.7 The 13 Cases: case 5 (Hi > Di): STALL before status + // TU_LOG(MSC_DEBUG, " SCSI case 5 (Hi > Di): %lu > %lu\r\n", p_cbw->total_bytes, p_msc->xferred_len); + usbd_edpt_stall(rhport, p_msc->ep_in); + } else { + TU_ASSERT(send_csw(p_msc)); + } + } + + #if TU_CHECK_MCU(OPT_MCU_CXD56) + // WORKAROUND: cxd56 has its own nuttx usb stack which does not forward Set/ClearFeature(Endpoint) to DCD. + // There is no way for us to know when EP is un-stall, therefore we will unconditionally un-stall here and + // hope everything will work + if ( usbd_edpt_stalled(rhport, p_msc->ep_in) ) { + usbd_edpt_clear_stall(rhport, p_msc->ep_in); + send_csw(p_msc); + } + #endif + return true; +} + //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ @@ -219,6 +265,32 @@ static inline void set_sense_medium_not_present(uint8_t lun) { tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } +#if CFG_TUD_MSC_ASYNC_IO +void tud_msc_async_io_done(int32_t bytes_processed) { + // Precheck to avoid queueing multiple RW done callback + TU_VERIFY(_mscd_itf.next_op != MSC_NEXT_OP_NONE,); + // Call usbd_edpt_xfer() in tud_task() to avoid racing condition + usbd_defer_func(tud_msc_async_io_done_cb, (void*) bytes_processed, false); +} + +static void tud_msc_async_io_done_cb(void* bytes_processed) { + TU_VERIFY(_mscd_itf.next_op != MSC_NEXT_OP_NONE,); + uint8_t next_op = _mscd_itf.next_op; + _mscd_itf.next_op = MSC_NEXT_OP_NONE; + int32_t nbytes = (int32_t)bytes_processed; + // READ10 + if (next_op == MSC_NEXT_OP_READ10) { + proc_read10_next(&_mscd_itf, nbytes); + } else if (next_op == MSC_NEXT_OP_WRITE10) { + proc_write10_next(&_mscd_itf, _mscd_itf.xferred_bytes, nbytes); + // Need to manually invoke CSW transfer + if (_mscd_itf.stage == MSC_STAGE_STATUS) { + proc_stage_status(&_mscd_itf); + } + } +} +#endif + //--------------------------------------------------------------------+ // USBD Driver API //--------------------------------------------------------------------+ @@ -245,12 +317,13 @@ uint16_t mscd_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint1 mscd_interface_t * p_msc = &_mscd_itf; p_msc->itf_num = itf_desc->bInterfaceNumber; + p_msc->rhport = rhport; // Open endpoint pair TU_ASSERT(usbd_open_edpt_pair(rhport, tu_desc_next(itf_desc), 2, TUSB_XFER_BULK, &p_msc->ep_out, &p_msc->ep_in), 0); // Prepare for Command Block Wrapper - TU_ASSERT(prepare_cbw(rhport, p_msc), drv_len); + TU_ASSERT(prepare_cbw(p_msc), drv_len); return drv_len; } @@ -289,14 +362,14 @@ bool mscd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t if (ep_addr == p_msc->ep_in) { if (p_msc->stage == MSC_STAGE_STATUS) { // resume sending SCSI status if we are in this stage previously before stalled - TU_ASSERT(send_csw(rhport, p_msc)); + TU_ASSERT(send_csw(p_msc)); } } else if (ep_addr == p_msc->ep_out) { if (p_msc->stage == MSC_STAGE_CMD) { // part of reset recovery (probably due to invalid CBW) -> prepare for new command // Note: skip if already queued previously if (usbd_edpt_ready(rhport, p_msc->ep_out)) { - TU_ASSERT(prepare_cbw(rhport, p_msc)); + TU_ASSERT(prepare_cbw(p_msc)); } } } @@ -344,7 +417,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t msc_csw_t * p_csw = &p_msc->csw; switch (p_msc->stage) { - case MSC_STAGE_CMD: + case MSC_STAGE_CMD: { //------------- new CBW received -------------// // Complete IN while waiting for CMD is usually Status of previous SCSI op, ignore it if (ep_addr != p_msc->ep_out) { @@ -382,12 +455,12 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t uint8_t const status = rdwr10_validate_cmd(p_cbw); if (status != MSC_CSW_STATUS_PASSED) { - fail_scsi_op(rhport, p_msc, status); + fail_scsi_op(p_msc, status); } else if (p_cbw->total_bytes) { if (SCSI_CMD_READ_10 == p_cbw->command[0]) { - proc_read10_cmd(rhport, p_msc); + proc_read10_cmd(p_msc); } else { - proc_write10_cmd(rhport, p_msc); + proc_write10_cmd(p_msc); } } else { // no data transfer, only exist in complaint test suite @@ -400,7 +473,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ((p_cbw->total_bytes > 0) && !is_data_in(p_cbw->dir)) { if (p_cbw->total_bytes > CFG_TUD_MSC_EP_BUFSIZE) { TU_LOG_DRV(" SCSI reject non READ10/WRITE10 with large data\r\n"); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else { // Didn't check for case 9 (Ho > Dn), which requires examining scsi command first // but it is OK to just receive data then responded with failed status @@ -418,12 +491,12 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if (resplen < 0) { // unsupported command TU_LOG_DRV(" SCSI unsupported or failed command\r\n"); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else if (resplen == 0) { if (p_cbw->total_bytes) { // 6.7 The 13 Cases: case 4 (Hi > Dn) // TU_LOG(MSC_DEBUG, " SCSI case 4 (Hi > Dn): %lu\r\n", p_cbw->total_bytes); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else { // case 1 Hn = Dn: all good p_msc->stage = MSC_STAGE_STATUS; @@ -432,7 +505,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if (p_cbw->total_bytes == 0) { // 6.7 The 13 Cases: case 2 (Hn < Di) // TU_LOG(MSC_DEBUG, " SCSI case 2 (Hn < Di): %lu\r\n", p_cbw->total_bytes); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else { // cannot return more than host expect p_msc->total_len = tu_min32((uint32_t)resplen, p_cbw->total_bytes); @@ -441,6 +514,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } } } + } break; case MSC_STAGE_DATA: @@ -454,10 +528,10 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // Data Stage is complete p_msc->stage = MSC_STAGE_STATUS; }else { - proc_read10_cmd(rhport, p_msc); + proc_read10_cmd(p_msc); } } else if (SCSI_CMD_WRITE_10 == p_cbw->command[0]) { - proc_write10_new_data(rhport, p_msc, xferred_bytes); + proc_write10_new_data(p_msc, xferred_bytes); } else { p_msc->xferred_len += xferred_bytes; @@ -468,7 +542,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( cb_result < 0 ) { // unsupported command TU_LOG_DRV(" SCSI unsupported command\r\n"); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); }else { // TODO haven't implement this scenario any further yet } @@ -517,7 +591,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t break; } - TU_ASSERT(prepare_cbw(rhport, p_msc)); + TU_ASSERT(prepare_cbw(p_msc)); } else { // Any xfer ended here is consider unknown error, ignore it TU_LOG1(" Warning expect SCSI Status but received unknown data\r\n"); @@ -528,26 +602,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } if (p_msc->stage == MSC_STAGE_STATUS) { - // skip status if epin is currently stalled, will do it when received Clear Stall request - if (!usbd_edpt_stalled(rhport, p_msc->ep_in)) { - if ((p_cbw->total_bytes > p_msc->xferred_len) && is_data_in(p_cbw->dir)) { - // 6.7 The 13 Cases: case 5 (Hi > Di): STALL before status - // TU_LOG(MSC_DEBUG, " SCSI case 5 (Hi > Di): %lu > %lu\r\n", p_cbw->total_bytes, p_msc->xferred_len); - usbd_edpt_stall(rhport, p_msc->ep_in); - } else { - TU_ASSERT(send_csw(rhport, p_msc)); - } - } - - #if TU_CHECK_MCU(OPT_MCU_CXD56) - // WORKAROUND: cxd56 has its own nuttx usb stack which does not forward Set/ClearFeature(Endpoint) to DCD. - // There is no way for us to know when EP is un-stall, therefore we will unconditionally un-stall here and - // hope everything will work - if ( usbd_edpt_stalled(rhport, p_msc->ep_in) ) { - usbd_edpt_clear_stall(rhport, p_msc->ep_in); - send_csw(rhport, p_msc); - } - #endif + TU_ASSERT(proc_stage_status(p_msc)); } return true; @@ -751,7 +806,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ return resplen; } -static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) { +static void proc_read10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; // block size already verified not zero @@ -765,16 +820,27 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) { // Application can consume smaller bytes uint32_t const offset = p_msc->xferred_len % block_sz; + +#if CFG_TUD_MSC_ASYNC_IO + p_msc->next_op = MSC_NEXT_OP_READ10; + tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); +#else nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); + proc_read10_next(p_msc, nbytes); +#endif +} +static void proc_read10_next(mscd_interface_t* p_msc, int32_t nbytes) { + uint8_t rhport = p_msc->rhport; if (nbytes < 0) { // negative means error -> endpoint is stalled & status in CSW set to failed TU_LOG_DRV(" tud_msc_read10_cb() return -1\r\n"); // set sense + msc_cbw_t const* p_cbw = &p_msc->cbw; set_sense_medium_not_present(p_cbw->lun); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else if (nbytes == 0) { // zero means not ready -> simulate an transfer complete so that this driver callback will fired again dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); @@ -783,7 +849,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) { } } -static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc) { +static void proc_write10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; bool writable = true; @@ -795,19 +861,19 @@ static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc) { // Not writable, complete this SCSI op with error // Sense = Write protected tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); return; } // remaining bytes capped at class buffer uint16_t nbytes = (uint16_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); - // Write10 callback will be called later when usb transfer complete + uint8_t rhport = p_msc->rhport; TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, nbytes),); } // process new data arrived from WRITE10 -static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint32_t xferred_bytes) { +static void proc_write10_new_data(mscd_interface_t* p_msc, uint32_t xferred_bytes) { msc_cbw_t const* p_cbw = &p_msc->cbw; // block size already verified not zero @@ -818,8 +884,18 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 // Invoke callback to consume new data uint32_t const offset = p_msc->xferred_len % block_sz; - int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); +#if CFG_TUD_MSC_ASYNC_IO + p_msc->next_op = MSC_NEXT_OP_WRITE10; + p_msc->xferred_bytes = xferred_bytes; + tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); +#else + int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); + proc_write10_next(p_msc, xferred_bytes, nbytes); +#endif +} + +static void proc_write10_next(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes) { if (nbytes < 0) { // negative means error -> failed this scsi op TU_LOG_DRV(" tud_msc_write10_cb() return -1\r\n"); @@ -828,9 +904,10 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 p_msc->xferred_len += xferred_bytes; // Set sense + msc_cbw_t const* p_cbw = &p_msc->cbw; set_sense_medium_not_present(p_cbw->lun); - fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else { // Application consume less than what we got (including zero) if ((uint32_t)nbytes < xferred_bytes) { @@ -841,6 +918,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 } // simulate an transfer complete with adjusted parameters --> callback will be invoked with adjusted parameter + uint8_t rhport = p_msc->rhport; dcd_event_xfer_complete(rhport, p_msc->ep_out, left_over, XFER_RESULT_SUCCESS, false); } else { // Application consume all bytes in our buffer @@ -851,7 +929,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 p_msc->stage = MSC_STAGE_STATUS; } else { // prepare to receive more data from host - proc_write10_cmd(rhport, p_msc); + proc_write10_cmd(p_msc); } } } diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 29acd280a..407fe241c 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -48,6 +48,11 @@ #error CFG_TUD_MSC_EP_BUFSIZE must be defined, value of a block size should work well, the more the better #endif +// Enable asynchronous read/write, once operation is finished tud_msc_async_io_done() must be called +#ifndef CFG_TUD_MSC_ASYNC_IO +#define CFG_TUD_MSC_ASYNC_IO 0 +#endif + TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct"); //--------------------------------------------------------------------+ @@ -73,6 +78,9 @@ bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, u // // - read < 0 : Indicate application error e.g invalid address. This request will be STALLed // and return failed status in command status wrapper phase. +// +// - In case of asynchronous IO enabled, application should passing reading parameters to background IO +// task and return immediately. Once reading is done, tud_msc_async_io_done() must be called. int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize); // Invoked when received SCSI WRITE10 command @@ -88,6 +96,8 @@ int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buf // - write < 0 : Indicate application error e.g invalid address. This request will be STALLed // and return failed status in command status wrapper phase. // +// - In case of asynchronous IO enabled, application should passing writing parameters to background IO +// task and return immediately. Once writing is done, tud_msc_async_io_done() must be called. // TODO change buffer to const uint8_t* int32_t tud_msc_write10_cb (uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize); @@ -121,6 +131,12 @@ void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_siz */ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize); +#if CFG_TUD_MSC_ASYNC_IO +// Called once asynchronous read/write operation is done +// bytes_processed has the same meaning of tud_msc_read10_cb() / +// tud_msc_write10_cb() return value +void tud_msc_async_io_done(int32_t bytes_processed); +#endif /*------------- Optional callbacks -------------*/ // Invoked when received GET_MAX_LUN request, required for multiple LUNs implementation -- cgit v1.3.1 From 84f8876c7c3639ef4ac707956831311791aefd76 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 31 Jan 2025 16:26:10 +0100 Subject: Use return code to choose async io. Signed-off-by: HiFiPhile --- src/class/msc/msc_device.c | 26 +++++++++------------ src/class/msc/msc_device.h | 56 +++++++++++++++++++++++++--------------------- 2 files changed, 41 insertions(+), 41 deletions(-) (limited to 'src/class/msc') diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index c7c926f4e..e3fe5a078 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -78,10 +78,10 @@ typedef struct { uint8_t sense_key; uint8_t add_sense_code; uint8_t add_sense_qualifier; -#if CFG_TUD_MSC_ASYNC_IO + + // Async IO uint8_t next_op; uint32_t xferred_bytes; -#endif }mscd_interface_t; static mscd_interface_t _mscd_itf; @@ -100,9 +100,7 @@ static void proc_write10_cmd(mscd_interface_t* p_msc); static void proc_write10_new_data(mscd_interface_t* p_msc, uint32_t xferred_bytes); static void proc_write10_next(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes); static bool proc_stage_status(mscd_interface_t* p_msc); -#if CFG_TUD_MSC_ASYNC_IO static void tud_msc_async_io_done_cb(void* bytes_processed); -#endif TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); @@ -265,7 +263,6 @@ static inline void set_sense_medium_not_present(uint8_t lun) { tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } -#if CFG_TUD_MSC_ASYNC_IO void tud_msc_async_io_done(int32_t bytes_processed) { // Precheck to avoid queueing multiple RW done callback TU_VERIFY(_mscd_itf.next_op != MSC_NEXT_OP_NONE,); @@ -289,7 +286,6 @@ static void tud_msc_async_io_done_cb(void* bytes_processed) { } } } -#endif //--------------------------------------------------------------------+ // USBD Driver API @@ -821,13 +817,12 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { // Application can consume smaller bytes uint32_t const offset = p_msc->xferred_len % block_sz; -#if CFG_TUD_MSC_ASYNC_IO p_msc->next_op = MSC_NEXT_OP_READ10; - tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); -#else nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); - proc_read10_next(p_msc, nbytes); -#endif + if (nbytes != TUD_MSC_RET_ASYNC) { + p_msc->next_op = MSC_NEXT_OP_NONE; + proc_read10_next(p_msc, nbytes); + } } static void proc_read10_next(mscd_interface_t* p_msc, int32_t nbytes) { @@ -885,14 +880,13 @@ static void proc_write10_new_data(mscd_interface_t* p_msc, uint32_t xferred_byte // Invoke callback to consume new data uint32_t const offset = p_msc->xferred_len % block_sz; -#if CFG_TUD_MSC_ASYNC_IO p_msc->next_op = MSC_NEXT_OP_WRITE10; p_msc->xferred_bytes = xferred_bytes; - tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); -#else int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); - proc_write10_next(p_msc, xferred_bytes, nbytes); -#endif + if (nbytes != TUD_MSC_RET_ASYNC) { + p_msc->next_op = MSC_NEXT_OP_NONE; + proc_write10_next(p_msc, xferred_bytes, nbytes); + } } static void proc_write10_next(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes) { diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 407fe241c..7162b11e4 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -48,10 +48,11 @@ #error CFG_TUD_MSC_EP_BUFSIZE must be defined, value of a block size should work well, the more the better #endif -// Enable asynchronous read/write, once operation is finished tud_msc_async_io_done() must be called -#ifndef CFG_TUD_MSC_ASYNC_IO -#define CFG_TUD_MSC_ASYNC_IO 0 -#endif +// Return value of callback functions +// Error +#define TUD_MSC_RET_ERROR -1 +// Asynchronous IO +#define TUD_MSC_RET_ASYNC -16 TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct"); @@ -62,6 +63,11 @@ TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct"); // Set SCSI sense response bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, uint8_t add_sense_qualifier); +// Called once asynchronous read/write operation is done +// bytes_processed has the same meaning of tud_msc_read10_cb() / +// tud_msc_write10_cb() return value +void tud_msc_async_io_done(int32_t bytes_processed); + //--------------------------------------------------------------------+ // Application Callbacks (WEAK is optional) //--------------------------------------------------------------------+ @@ -70,34 +76,40 @@ bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, u // - Address = lba * BLOCK_SIZE + offset // - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE. // -// - Application fill the buffer (up to bufsize) with address contents and return number of read byte. If -// - read < bufsize : These bytes are transferred first and callback invoked again for remaining data. +// - Application fill the buffer (up to bufsize) with address contents and return number of bytes read or status. +// +// - ret < bufsize : These bytes are transferred first and callback will be invoked again for remaining data. // -// - read == 0 : Indicate application is not ready yet e.g disk I/O busy. -// Callback invoked again with the same parameters later on. +// - ret == 0 : Indicate application is not ready yet e.g disk I/O busy. +// Callback will be invoked again with the same parameters later on. // -// - read < 0 : Indicate application error e.g invalid address. This request will be STALLed +// - ret == TUD_MSC_RET_ERROR (-1) +// : Indicate application error e.g invalid address. This request will be STALLed // and return failed status in command status wrapper phase. // -// - In case of asynchronous IO enabled, application should passing reading parameters to background IO -// task and return immediately. Once reading is done, tud_msc_async_io_done() must be called. +// - ret == TUD_MSC_RET_ASYNC (-16) +// : Data reading will be done asynchronously in a background task. Application should return immediately. +// tud_msc_async_io_done() must be called once reading is done to signal completion. int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize); // Invoked when received SCSI WRITE10 command // - Address = lba * BLOCK_SIZE + offset // - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE. // -// - Application write data from buffer to address contents (up to bufsize) and return number of written byte. If -// - write < bufsize : callback invoked again with remaining data later on. +// - Application writes data from buffer to address contents (up to bufsize) and returns the number of bytes written or status. // -// - write == 0 : Indicate application is not ready yet e.g disk I/O busy. -// Callback invoked again with the same parameters later on. +// - ret < bufsize : Callback will be invoked again with remaining data later on. // -// - write < 0 : Indicate application error e.g invalid address. This request will be STALLed -// and return failed status in command status wrapper phase. +// - ret == 0 : Indicate application is not ready yet e.g disk I/O busy. +// Callback will be invoked again with the same parameters later on. // -// - In case of asynchronous IO enabled, application should passing writing parameters to background IO -// task and return immediately. Once writing is done, tud_msc_async_io_done() must be called. +// - ret == TUD_MSC_RET_ERROR (-1) +// : Indicate application error e.g invalid address. This request will be STALLed +// and return failed status in command status wrapper phase. +// +// - ret == TUD_MSC_RET_ASYNC (-16) +// : Data writing will be done asynchronously in a background task. Application should return immediately. +// tud_msc_async_io_done() must be called once writing is done to signal completion. // TODO change buffer to const uint8_t* int32_t tud_msc_write10_cb (uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize); @@ -131,12 +143,6 @@ void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_siz */ int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize); -#if CFG_TUD_MSC_ASYNC_IO -// Called once asynchronous read/write operation is done -// bytes_processed has the same meaning of tud_msc_read10_cb() / -// tud_msc_write10_cb() return value -void tud_msc_async_io_done(int32_t bytes_processed); -#endif /*------------- Optional callbacks -------------*/ // Invoked when received GET_MAX_LUN request, required for multiple LUNs implementation -- cgit v1.3.1 From 8d2310247c47160bf8de6e5f754284360ad7e937 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 31 Jan 2025 16:31:47 +0100 Subject: Fix CI. Signed-off-by: HiFiPhile --- examples/device/cdc_msc_freertos/src/msc_disk.c | 2 ++ src/class/msc/msc_device.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'src/class/msc') diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index c75b9ae34..c2aaca847 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -166,8 +166,10 @@ static void io_task(void *params) { uint8_t const* addr = msc_disk[io_ops.lba] + io_ops.offset; memcpy(io_ops.buffer, addr, io_ops.bufsize); } else { +#ifndef CFG_EXAMPLE_MSC_READONLY uint8_t* addr = msc_disk[io_ops.lba] + io_ops.offset; memcpy(addr, io_ops.buffer, io_ops.bufsize); +#endif } tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS); diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index e3fe5a078..72c3747fc 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -267,14 +267,14 @@ void tud_msc_async_io_done(int32_t bytes_processed) { // Precheck to avoid queueing multiple RW done callback TU_VERIFY(_mscd_itf.next_op != MSC_NEXT_OP_NONE,); // Call usbd_edpt_xfer() in tud_task() to avoid racing condition - usbd_defer_func(tud_msc_async_io_done_cb, (void*) bytes_processed, false); + usbd_defer_func(tud_msc_async_io_done_cb, (void*) (intptr_t)bytes_processed, false); } static void tud_msc_async_io_done_cb(void* bytes_processed) { TU_VERIFY(_mscd_itf.next_op != MSC_NEXT_OP_NONE,); uint8_t next_op = _mscd_itf.next_op; _mscd_itf.next_op = MSC_NEXT_OP_NONE; - int32_t nbytes = (int32_t)bytes_processed; + int32_t nbytes = (int32_t)(intptr_t)bytes_processed; // READ10 if (next_op == MSC_NEXT_OP_READ10) { proc_read10_next(&_mscd_itf, nbytes); -- cgit v1.3.1 From b1eedf4d1d95d6e8c7de425080a107a33cbf0e5d Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 17 Apr 2025 14:34:55 +0700 Subject: fix iar make build with wb and u5 --- examples/build_system/make/cpu/cortex-m4.mk | 4 ++-- examples/host/msc_file_explorer/Makefile | 2 +- hw/bsp/broadcom_32bit/family.mk | 2 +- hw/bsp/broadcom_64bit/family.mk | 2 +- hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk | 2 +- hw/bsp/lpc15/family.mk | 2 +- hw/bsp/lpc17/family.mk | 2 +- hw/bsp/lpc18/family.mk | 2 +- hw/bsp/lpc40/family.mk | 2 +- hw/bsp/lpc43/family.mk | 6 +++--- hw/bsp/stm32f4/family.mk | 1 - hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk | 4 +--- hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk | 4 +--- hw/bsp/stm32u5/boards/stm32u575eval/board.mk | 4 +--- hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk | 4 +--- hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk | 4 +--- hw/bsp/stm32u5/family.mk | 7 +++++++ hw/bsp/stm32wb/family.mk | 21 +++++++++++++-------- src/class/msc/msc_device.c | 5 +++-- 19 files changed, 41 insertions(+), 39 deletions(-) (limited to 'src/class/msc') diff --git a/examples/build_system/make/cpu/cortex-m4.mk b/examples/build_system/make/cpu/cortex-m4.mk index 4e16819d1..57d6e126d 100644 --- a/examples/build_system/make/cpu/cortex-m4.mk +++ b/examples/build_system/make/cpu/cortex-m4.mk @@ -12,8 +12,8 @@ else ifeq ($(TOOLCHAIN),clang) -mfpu=fpv4-sp-d16 \ else ifeq ($(TOOLCHAIN),iar) - CFLAGS += --cpu cortex-m4 --fpu VFPv4 - ASFLAGS += --cpu cortex-m4 --fpu VFPv4 + CFLAGS += --cpu cortex-m4 --fpu VFPv4-SP + ASFLAGS += --cpu cortex-m4 --fpu VFPv4-SP else $(error "TOOLCHAIN is not supported") diff --git a/examples/host/msc_file_explorer/Makefile b/examples/host/msc_file_explorer/Makefile index c7d6a7cae..f0872376f 100644 --- a/examples/host/msc_file_explorer/Makefile +++ b/examples/host/msc_file_explorer/Makefile @@ -22,6 +22,6 @@ SRC_C += \ $(FATFS_PATH)/ffunicode.c \ # suppress warning caused by fatfs -CFLAGS += -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=cast-qual include ../../build_system/make/rules.mk diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk index a282e9961..9d4a3b76c 100644 --- a/hw/bsp/broadcom_32bit/family.mk +++ b/hw/bsp/broadcom_32bit/family.mk @@ -15,7 +15,7 @@ CFLAGS += \ CROSS_COMPILE = arm-none-eabi- # mcu driver cause following warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS_GCC += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/broadcom_64bit/family.mk b/hw/bsp/broadcom_64bit/family.mk index 37d381f9f..1ce80e22b 100644 --- a/hw/bsp/broadcom_64bit/family.mk +++ b/hw/bsp/broadcom_64bit/family.mk @@ -14,7 +14,7 @@ CFLAGS += \ CROSS_COMPILE = aarch64-none-elf- # mcu driver cause following warnings -CFLAGS += -Wno-error=cast-qual -Wno-error=redundant-decls +CFLAGS_GCC += -Wno-error=cast-qual -Wno-error=redundant-decls SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk index c4dc65b63..fb3eb2a03 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk @@ -3,7 +3,7 @@ MCU = K32L2A41A CFLAGS += -DCPU_K32L2A41VLH1A # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual # All source paths should be relative to the top level. LD_FILE = $(MCU_DIR)/gcc/K32L2A41xxxxA_flash.ld diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk index b83e008e8..3b63580c0 100644 --- a/hw/bsp/lpc15/family.mk +++ b/hw/bsp/lpc15/family.mk @@ -15,7 +15,7 @@ CFLAGS += \ LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs # mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -Wno-error=cast-qual MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index d719a47b7..551eb9e62 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -13,7 +13,7 @@ CFLAGS += \ -DRTC_EV_SUPPORT=0 # lpc_types.h cause following errors -CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=cast-qual # caused by freeRTOS port !! CFLAGS += -Wno-error=maybe-uninitialized diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index f120f63b2..87b831255 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -12,7 +12,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC18XX # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=unused-parameter -Wno-error=cast-qual LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index ef9fe57b2..06155c760 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -13,7 +13,7 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_LPC40XX # mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual +CFLAGS_GCC += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs diff --git a/hw/bsp/lpc43/family.mk b/hw/bsp/lpc43/family.mk index e1406aae7..4a2ba6ec3 100644 --- a/hw/bsp/lpc43/family.mk +++ b/hw/bsp/lpc43/family.mk @@ -5,14 +5,14 @@ include ${TOP}/${BOARD_PATH}/board.mk CPU_CORE ?= cortex-m4 CFLAGS += \ - -flto \ - -nostdlib \ -DCORE_M4 \ -D__USE_LPCOPEN \ -DCFG_TUSB_MCU=OPT_MCU_LPC43XX # mcu driver cause following warnings -CFLAGS += \ +CFLAGS_GCC += \ + -flto \ + -nostdlib \ -Wno-error=unused-parameter \ -Wno-error=cast-qual \ -Wno-error=incompatible-pointer-types \ diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index 51ff43a60..c3c41dc3f 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -1,6 +1,5 @@ UF2_FAMILY_ID = 0x57755a57 ST_FAMILY = f4 -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver diff --git a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk index ae63afef3..0a2c47030 100644 --- a/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk +++ b/hw/bsp/stm32u5/boards/b_u585i_iot2a/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u585xx CFLAGS += \ -DSTM32U585xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s - -MCU_VARIANT = stm32u585xx # For flash-jlink target JLINK_DEVICE = stm32u585zi diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk index 072c595fb..0aba57ce4 100644 --- a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u545xx CFLAGS += \ -DSTM32U545xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U545xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u545xx.s - -MCU_VARIANT = stm32u545xx # For flash-jlink target JLINK_DEVICE = stm32u545re diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk index fee56f2ba..4bc9fea10 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u575xx CFLAGS += \ -DSTM32U575xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s - -MCU_VARIANT = stm32u575xx # For flash-jlink target JLINK_DEVICE = stm32u575ai diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk index c83ec3999..d09dc5c46 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk @@ -1,11 +1,9 @@ +MCU_VARIANT = stm32u575xx CFLAGS += \ -DSTM32U575xx \ # All source paths should be relative to the top level. LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s - -MCU_VARIANT = stm32u575xx # For flash-jlink target JLINK_DEVICE = stm32u575zi diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk index 4bebe3330..c9fdbac1a 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk @@ -1,3 +1,4 @@ +MCU_VARIANT = stm32u5a5xx CFLAGS += \ -DSTM32U5A5xx \ -DHSE_VALUE=16000000UL \ @@ -5,8 +6,5 @@ CFLAGS += \ # All source paths should be relative to the top level. LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s - -MCU_VARIANT = stm32u5a5xx # For flash-jlink target JLINK_DEVICE = stm32u575zi diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 05fe4608a..7fc728dcf 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -57,5 +57,12 @@ INC += \ $(TOP)/$(ST_HAL_DRIVER)/Inc \ $(TOP)/$(BOARD_PATH) +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s + +# Linker +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf + # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index de8372eea..a80ff6f5b 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -9,14 +9,12 @@ include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 CFLAGS += \ - -flto \ - -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_STM32WB -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=cast-align -Wno-unused-parameter - -LD_FILE ?= ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld +CFLAGS_GCC += \ + -flto \ + -nostdlib -nostartfiles \ + -Wno-error=cast-align -Wno-unused-parameter LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs @@ -25,19 +23,26 @@ SRC_C += \ $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_${MCU_VARIANT}_cm4.s - INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ $(TOP)/$(ST_HAL_DRIVER)/Inc +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT)_cm4.s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT)_cm4.s + +# Linker +LD_FILE_GCC ?= ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash_cm4.icf + # flash target using on-board stlink flash: flash-stlink diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 6670045aa..87c77c9a7 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -344,7 +344,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t msc_csw_t * p_csw = &p_msc->csw; switch (p_msc->stage) { - case MSC_STAGE_CMD: + case MSC_STAGE_CMD: { //------------- new CBW received -------------// // Complete IN while waiting for CMD is usually Status of previous SCSI op, ignore it if (ep_addr != p_msc->ep_out) { @@ -441,7 +441,8 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t } } } - break; + break; + } case MSC_STAGE_DATA: TU_LOG_DRV(" SCSI Data [Lun%u]\r\n", p_cbw->lun); -- cgit v1.3.1 From d22cbe4cb5b88c869754e91c97eff513ed8b7b33 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 1 Jul 2025 20:13:21 +0700 Subject: refactor async io, add in_isr argument to tud_msc_async_io_done() use cbw.command[0] for pending IO command --- src/class/msc/msc_device.c | 209 +++++++++++++++++++++------------------------ src/class/msc/msc_device.h | 70 ++++++--------- 2 files changed, 122 insertions(+), 157 deletions(-) (limited to 'src/class/msc') diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index e583f6ba8..709734b87 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -52,36 +52,27 @@ enum { MSC_STAGE_NEED_RESET, }; -enum { - MSC_NEXT_OP_NONE = 0, - MSC_NEXT_OP_READ10, - MSC_NEXT_OP_WRITE10, - MSC_NEXT_OP_STATUS -}; - typedef struct { - TU_ATTR_ALIGNED(4) msc_cbw_t cbw; - TU_ATTR_ALIGNED(4) msc_csw_t csw; - + TU_ATTR_ALIGNED(4) msc_cbw_t cbw; // 31 bytes uint8_t rhport; + + TU_ATTR_ALIGNED(4) msc_csw_t csw; // 13 bytes uint8_t itf_num; uint8_t ep_in; uint8_t ep_out; - // Bulk Only Transfer (BOT) Protocol - uint8_t stage; - uint32_t total_len; // byte to be transferred, can be smaller than total_bytes in cbw uint32_t xferred_len; // numbered of bytes transferred so far in the Data Stage - // Sense Response Data + // Bulk Only Transfer (BOT) Protocol + uint8_t stage; + + // SCSI Sense Response Data uint8_t sense_key; uint8_t add_sense_code; uint8_t add_sense_qualifier; - // Async IO - uint8_t next_op; - uint32_t xferred_bytes; + uint8_t pending_io; // pending async IO }mscd_interface_t; static mscd_interface_t _mscd_itf; @@ -95,12 +86,11 @@ CFG_TUD_MEM_SECTION static struct { //--------------------------------------------------------------------+ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_t* buffer, uint32_t bufsize); static void proc_read10_cmd(mscd_interface_t* p_msc); -static void proc_read10_next(mscd_interface_t* p_msc, int32_t nbytes); +static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes); static void proc_write10_cmd(mscd_interface_t* p_msc); -static void proc_write10_new_data(mscd_interface_t* p_msc, uint32_t xferred_bytes); -static void proc_write10_next(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes); +static void proc_write10_host_data(mscd_interface_t* p_msc, uint32_t xferred_bytes); +static void proc_write_io_data(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes); static bool proc_stage_status(mscd_interface_t* p_msc); -static void tud_msc_async_io_done_cb(void* bytes_processed); TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); @@ -195,30 +185,31 @@ static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { return status; } -static bool proc_stage_status(mscd_interface_t* p_msc) { +static bool proc_stage_status(mscd_interface_t *p_msc) { uint8_t rhport = p_msc->rhport; - msc_cbw_t const* p_cbw = &p_msc->cbw; + msc_cbw_t const *p_cbw = &p_msc->cbw; + // skip status if epin is currently stalled, will do it when received Clear Stall request - if (!usbd_edpt_stalled(rhport, p_msc->ep_in)) { - if ((p_cbw->total_bytes > p_msc->xferred_len) && is_data_in(p_cbw->dir)) { - // 6.7 The 13 Cases: case 5 (Hi > Di): STALL before status - // TU_LOG_DRV(" SCSI case 5 (Hi > Di): %lu > %lu\r\n", p_cbw->total_bytes, p_msc->xferred_len); - usbd_edpt_stall(rhport, p_msc->ep_in); - } else { - TU_ASSERT(send_csw(p_msc)); - } + if (!usbd_edpt_stalled(rhport, p_msc->ep_in)) { + if ((p_cbw->total_bytes > p_msc->xferred_len) && is_data_in(p_cbw->dir)) { + // 6.7 The 13 Cases: case 5 (Hi > Di): STALL before status + // TU_LOG_DRV(" SCSI case 5 (Hi > Di): %lu > %lu\r\n", p_cbw->total_bytes, p_msc->xferred_len); + usbd_edpt_stall(rhport, p_msc->ep_in); + } else { + TU_ASSERT(send_csw(p_msc)); } + } - #if TU_CHECK_MCU(OPT_MCU_CXD56) - // WORKAROUND: cxd56 has its own nuttx usb stack which does not forward Set/ClearFeature(Endpoint) to DCD. - // There is no way for us to know when EP is un-stall, therefore we will unconditionally un-stall here and - // hope everything will work - if ( usbd_edpt_stalled(rhport, p_msc->ep_in) ) { - usbd_edpt_clear_stall(rhport, p_msc->ep_in); - send_csw(p_msc); - } - #endif - return true; + #if TU_CHECK_MCU(OPT_MCU_CXD56) + // WORKAROUND: cxd56 has its own nuttx usb stack which does not forward Set/ClearFeature(Endpoint) to DCD. + // There is no way for us to know when EP is un-stall, therefore we will unconditionally un-stall here and + // hope everything will work + if (usbd_edpt_stalled(rhport, p_msc->ep_in)) { + usbd_edpt_clear_stall(rhport, p_msc->ep_in); + send_csw(p_msc); + } + #endif + return true; } //--------------------------------------------------------------------+ @@ -258,39 +249,57 @@ bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, u return true; } -static inline void set_sense_medium_not_present(uint8_t lun) { +TU_ATTR_ALWAYS_INLINE static inline void set_sense_medium_not_present(uint8_t lun) { // default sense is NOT READY, MEDIUM NOT PRESENT tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } -void tud_msc_async_io_done(int32_t bytes_processed) { - // Precheck to avoid queueing multiple RW done callback - TU_VERIFY(_mscd_itf.next_op != MSC_NEXT_OP_NONE,); - // Call usbd_edpt_xfer() in tud_task() to avoid racing condition - usbd_defer_func(tud_msc_async_io_done_cb, (void*) (intptr_t)bytes_processed, false); +static void proc_async_io_done(void *bytes_processed) { + mscd_interface_t *p_msc = &_mscd_itf; + TU_VERIFY(p_msc->pending_io, ); + const int32_t nbytes = (int32_t) (intptr_t) bytes_processed; + const uint8_t cmd = p_msc->cbw.command[0]; + + p_msc->pending_io = 0; + switch (cmd) { + case SCSI_CMD_READ_10: + proc_read_io_data(p_msc, nbytes); + break; + + case SCSI_CMD_WRITE_10: + proc_write_io_data(p_msc, (uint32_t) nbytes, nbytes); + break; + + default: break; + } + + // send status if stage is transitioned to STATUS + if (p_msc->stage == MSC_STAGE_STATUS) { + proc_stage_status(p_msc); + } } -static void tud_msc_async_io_done_cb(void* bytes_processed) { - TU_VERIFY(_mscd_itf.next_op != MSC_NEXT_OP_NONE,); - uint8_t next_op = _mscd_itf.next_op; - _mscd_itf.next_op = MSC_NEXT_OP_NONE; - int32_t nbytes = (int32_t)(intptr_t)bytes_processed; - // READ10 - if (next_op == MSC_NEXT_OP_READ10) { - proc_read10_next(&_mscd_itf, nbytes); - } else if (next_op == MSC_NEXT_OP_WRITE10) { - proc_write10_next(&_mscd_itf, _mscd_itf.xferred_bytes, nbytes); - // Need to manually invoke CSW transfer - if (_mscd_itf.stage == MSC_STAGE_STATUS) { - proc_stage_status(&_mscd_itf); - } +bool tud_msc_async_io_done(int32_t bytes_io, bool in_isr) { + // Precheck to avoid queueing multiple RW done callback + TU_VERIFY(_mscd_itf.pending_io); + if (bytes_io == 0) { + bytes_io = TUD_MSC_RET_ERROR; // 0 is treated as error, no sense to call this with BUSY here + } + + if (in_isr) { + usbd_defer_func(proc_async_io_done, (void*) (intptr_t)bytes_io, in_isr); + } else { + proc_async_io_done((void*)(intptr_t) bytes_io); } + + return true; } //--------------------------------------------------------------------+ // USBD Driver API //--------------------------------------------------------------------+ void mscd_init(void) { + TU_LOG_INT(CFG_TUD_MSC_LOG_LEVEL, sizeof(mscd_interface_t)); tu_memclr(&_mscd_itf, sizeof(mscd_interface_t)); } @@ -528,7 +537,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t proc_read10_cmd(p_msc); } } else if (SCSI_CMD_WRITE_10 == p_cbw->command[0]) { - proc_write10_new_data(p_msc, xferred_bytes); + proc_write10_host_data(p_msc, xferred_bytes); } else { p_msc->xferred_len += xferred_bytes; @@ -560,7 +569,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t break; case MSC_STAGE_STATUS_SENT: - // Wait for the Status phase to complete + // Status phase is complete if ((ep_addr == p_msc->ep_in) && (xferred_bytes == sizeof(msc_csw_t))) { TU_LOG_DRV(" SCSI Status [Lun%u] = %u\r\n", p_cbw->lun, p_csw->status); // TU_LOG_MEM(CFG_TUD_MSC_LOG_LEVEL, p_csw, xferred_bytes, 2); @@ -590,7 +599,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t TU_ASSERT(prepare_cbw(p_msc)); } else { - // Any xfer ended here is consider unknown error, ignore it + // Any xfer ended here is considered unknown error, ignore it TU_LOG1(" Warning expect SCSI Status but received unknown data\r\n"); } break; @@ -696,8 +705,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ break; case SCSI_CMD_READ_FORMAT_CAPACITY: { - scsi_read_format_capacity_data_t read_fmt_capa = - { + scsi_read_format_capacity_data_t read_fmt_capa = { .list_length = 8, .block_num = 0, .descriptor_type = 2, // formatted media @@ -729,8 +737,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ break; case SCSI_CMD_INQUIRY: { - scsi_inquiry_resp_t inquiry_rsp = - { + scsi_inquiry_resp_t inquiry_rsp = { .is_removable = 1, .version = 2, .response_data_format = 2, @@ -750,8 +757,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ break; case SCSI_CMD_MODE_SENSE_6: { - scsi_mode_sense6_resp_t mode_resp = - { + scsi_mode_sense6_resp_t mode_resp = { .data_len = 3, .medium_type = 0, .write_protected = false, @@ -772,8 +778,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ break; case SCSI_CMD_REQUEST_SENSE: { - scsi_sense_fixed_resp_t sense_rsp = - { + scsi_sense_fixed_resp_t sense_rsp = { .response_code = 0x70, // current, fixed format .valid = 1 }; @@ -805,32 +810,27 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ static void proc_read10_cmd(mscd_interface_t* p_msc) { msc_cbw_t const* p_cbw = &p_msc->cbw; - - // block size already verified not zero - uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); - - // Adjust lba with transferred bytes + uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero + // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); + uint32_t const offset = p_msc->xferred_len % block_sz; // remaining bytes capped at class buffer int32_t nbytes = (int32_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); - // Application can consume smaller bytes - uint32_t const offset = p_msc->xferred_len % block_sz; - - p_msc->next_op = MSC_NEXT_OP_READ10; + p_msc->pending_io = 1; nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, (uint32_t)nbytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->next_op = MSC_NEXT_OP_NONE; - proc_read10_next(p_msc, nbytes); + p_msc->pending_io = 0; + proc_read_io_data(p_msc, nbytes); } } -static void proc_read10_next(mscd_interface_t* p_msc, int32_t nbytes) { +static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { uint8_t rhport = p_msc->rhport; if (nbytes < 0) { // negative means error -> endpoint is stalled & status in CSW set to failed - TU_LOG_DRV(" tud_msc_read10_cb() return -1\r\n"); + TU_LOG_DRV(" IO read() failed\r\n"); // set sense msc_cbw_t const* p_cbw = &p_msc->cbw; @@ -838,7 +838,7 @@ static void proc_read10_next(mscd_interface_t* p_msc, int32_t nbytes) { fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else if (nbytes == 0) { - // zero means not ready -> simulate an transfer complete so that this driver callback will fired again + // zero means not ready -> fake a transfer complete so that this driver callback will fire again dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); } else { TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.buf, (uint16_t) nbytes),); @@ -864,55 +864,42 @@ static void proc_write10_cmd(mscd_interface_t* p_msc) { // remaining bytes capped at class buffer uint16_t nbytes = (uint16_t)tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes - p_msc->xferred_len); // Write10 callback will be called later when usb transfer complete - uint8_t rhport = p_msc->rhport; - TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_epbuf.buf, nbytes),); + TU_ASSERT(usbd_edpt_xfer(p_msc->rhport, p_msc->ep_out, _mscd_epbuf.buf, nbytes),); } // process new data arrived from WRITE10 -static void proc_write10_new_data(mscd_interface_t* p_msc, uint32_t xferred_bytes) { +static void proc_write10_host_data(mscd_interface_t* p_msc, uint32_t xferred_bytes) { msc_cbw_t const* p_cbw = &p_msc->cbw; + uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); // already verified non-zero - // block size already verified not zero - uint16_t const block_sz = rdwr10_get_blocksize(p_cbw); - - // Adjust lba with transferred bytes + // Adjust lba & offset with transferred bytes uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); - - // Invoke callback to consume new data uint32_t const offset = p_msc->xferred_len % block_sz; - p_msc->next_op = MSC_NEXT_OP_WRITE10; - p_msc->xferred_bytes = xferred_bytes; + p_msc->pending_io = 1; int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_epbuf.buf, xferred_bytes); if (nbytes != TUD_MSC_RET_ASYNC) { - p_msc->next_op = MSC_NEXT_OP_NONE; - proc_write10_next(p_msc, xferred_bytes, nbytes); + p_msc->pending_io = 0; + proc_write_io_data(p_msc, xferred_bytes, nbytes); } } -static void proc_write10_next(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes) { +static void proc_write_io_data(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes) { if (nbytes < 0) { // negative means error -> failed this scsi op - TU_LOG_DRV(" tud_msc_write10_cb() return -1\r\n"); - - // update actual byte before failed - p_msc->xferred_len += xferred_bytes; - - msc_cbw_t const* p_cbw = &p_msc->cbw; - set_sense_medium_not_present(p_cbw->lun); + TU_LOG_DRV(" IO write() failed\r\n"); + set_sense_medium_not_present(p_msc->cbw.lun); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); } else { if ((uint32_t)nbytes < xferred_bytes) { // Application consume less than what we got (including zero) const uint32_t left_over = xferred_bytes - (uint32_t)nbytes; if (nbytes > 0) { - p_msc->xferred_len += (uint16_t)nbytes; memmove(_mscd_epbuf.buf, _mscd_epbuf.buf + nbytes, left_over); } - // simulate a transfer complete with adjusted parameters --> callback will be invoked with adjusted parameter - uint8_t rhport = p_msc->rhport; - dcd_event_xfer_complete(rhport, p_msc->ep_out, left_over, XFER_RESULT_SUCCESS, false); + // fake a transfer complete with adjusted parameters --> callback will be invoked with adjusted parameters + dcd_event_xfer_complete(p_msc->rhport, p_msc->ep_out, left_over, XFER_RESULT_SUCCESS, false); } else { // Application consume all bytes in our buffer p_msc->xferred_len += xferred_bytes; diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 7162b11e4..2ad31c245 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -49,10 +49,11 @@ #endif // Return value of callback functions -// Error -#define TUD_MSC_RET_ERROR -1 -// Asynchronous IO -#define TUD_MSC_RET_ASYNC -16 +enum { + TUD_MSC_RET_BUSY = 0, // Busy, e.g disk I/O is not ready + TUD_MSC_RET_ERROR = -1, + TUD_MSC_RET_ASYNC = -2, // Asynchronous IO +}; TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct"); @@ -63,54 +64,31 @@ TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct"); // Set SCSI sense response bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, uint8_t add_sense_qualifier); -// Called once asynchronous read/write operation is done -// bytes_processed has the same meaning of tud_msc_read10_cb() / -// tud_msc_write10_cb() return value -void tud_msc_async_io_done(int32_t bytes_processed); +// Called by Application once asynchronous I/O operation is done +// bytes_io is number of bytes in I/O op, typically the bufsize in read/write_cb() or +// TUD_MSC_RET_ERROR (-1) for error. Note TUD_MSC_RET_BUSY (0) will be treated as error as well. +bool tud_msc_async_io_done(int32_t bytes_io, bool in_isr); //--------------------------------------------------------------------+ // Application Callbacks (WEAK is optional) //--------------------------------------------------------------------+ -// Invoked when received SCSI READ10 command -// - Address = lba * BLOCK_SIZE + offset -// - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE. -// -// - Application fill the buffer (up to bufsize) with address contents and return number of bytes read or status. -// -// - ret < bufsize : These bytes are transferred first and callback will be invoked again for remaining data. -// -// - ret == 0 : Indicate application is not ready yet e.g disk I/O busy. -// Callback will be invoked again with the same parameters later on. -// -// - ret == TUD_MSC_RET_ERROR (-1) -// : Indicate application error e.g invalid address. This request will be STALLed -// and return failed status in command status wrapper phase. -// -// - ret == TUD_MSC_RET_ASYNC (-16) -// : Data reading will be done asynchronously in a background task. Application should return immediately. -// tud_msc_async_io_done() must be called once reading is done to signal completion. +/* + Invoked when received SCSI READ10/WRITE10 command + - Address = lba * BLOCK_SIZE + offset + - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE. + - Application fill the buffer (up to bufsize) with address contents and return number of bytes read or status. + - 0 < ret < bufsize: These bytes are transferred first and callback will be invoked again for remaining data. + - ret == TUD_MSC_RET_BUSY + Application is buys e.g disk I/O not ready. + Callback will be invoked again with the same parameters later on. + - ret == TUD_MSC_RET_ERROR + error such as invalid address. This request will be STALLed and scsi command will be failed + - ret == TUD_MSC_RET_ASYNC + Data I/O will be done asynchronously in a background task. Application should return immediately. + tud_msc_async_io_done() must be called once IO/ is done to signal completion. +*/ int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize); - -// Invoked when received SCSI WRITE10 command -// - Address = lba * BLOCK_SIZE + offset -// - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE. -// -// - Application writes data from buffer to address contents (up to bufsize) and returns the number of bytes written or status. -// -// - ret < bufsize : Callback will be invoked again with remaining data later on. -// -// - ret == 0 : Indicate application is not ready yet e.g disk I/O busy. -// Callback will be invoked again with the same parameters later on. -// -// - ret == TUD_MSC_RET_ERROR (-1) -// : Indicate application error e.g invalid address. This request will be STALLed -// and return failed status in command status wrapper phase. -// -// - ret == TUD_MSC_RET_ASYNC (-16) -// : Data writing will be done asynchronously in a background task. Application should return immediately. -// tud_msc_async_io_done() must be called once writing is done to signal completion. -// TODO change buffer to const uint8_t* int32_t tud_msc_write10_cb (uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize); // Invoked when received SCSI_CMD_INQUIRY -- cgit v1.3.1 From 216a35e59a095e6ccb70f7c9bd4f7bc737f44140 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 1 Jul 2025 20:15:16 +0700 Subject: update example --- examples/device/cdc_msc_freertos/src/msc_disk.c | 117 +++++++++------------ examples/device/cdc_msc_freertos/src/tusb_config.h | 6 -- src/class/msc/msc_device.c | 6 +- 3 files changed, 55 insertions(+), 74 deletions(-) (limited to 'src/class/msc') diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index c2aaca847..d1ff2f71b 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -28,8 +28,13 @@ #if CFG_TUD_MSC -#if CFG_EXAMPLE_MSC_ASYNC_IO +// Use async IO in example or not +#define CFG_EXAMPLE_MSC_ASYNC_IO 1 + +// Simulate read/write operation delay +#define CFG_EXAMPLE_MSC_IO_DELAY_MS 0 +#if CFG_EXAMPLE_MSC_ASYNC_IO #define IO_STACK_SIZE configMINIMAL_STACK_SIZE typedef struct { @@ -66,8 +71,7 @@ static bool ejected = false; If you find any bugs or get any questions, feel free to file an\r\n\ issue at github.com/hathach/tinyusb" -enum -{ +enum { DISK_BLOCK_NUM = 16, // 8KB is the smallest size that windows allow to mount DISK_BLOCK_SIZE = 512 }; @@ -162,18 +166,20 @@ static void io_task(void *params) { io_ops_t io_ops; while (1) { if (xQueueReceive(io_queue, &io_ops, portMAX_DELAY)) { + const uint8_t* addr = msc_disk[io_ops.lba] + io_ops.offset; + int32_t nbytes = io_ops.bufsize; if (io_ops.is_read) { - uint8_t const* addr = msc_disk[io_ops.lba] + io_ops.offset; memcpy(io_ops.buffer, addr, io_ops.bufsize); } else { #ifndef CFG_EXAMPLE_MSC_READONLY - uint8_t* addr = msc_disk[io_ops.lba] + io_ops.offset; - memcpy(addr, io_ops.buffer, io_ops.bufsize); + memcpy((uint8_t*) addr, io_ops.buffer, io_ops.bufsize); +#else + nbytes = -1; // failed to write #endif } tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS); - tud_msc_async_io_done(io_ops.bufsize); + tud_msc_async_io_done(nbytes, false); } } } @@ -184,14 +190,11 @@ void msc_disk_init() {} // Invoked when received SCSI_CMD_INQUIRY // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) -{ +void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { (void) lun; - const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id , vid, strlen(vid)); memcpy(product_id , pid, strlen(pid)); memcpy(product_rev, rev, strlen(rev)); @@ -199,8 +202,7 @@ void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16 // Invoked when received Test Unit Ready command. // return true allowing host to read/write this LUN e.g SD card inserted -bool tud_msc_test_unit_ready_cb(uint8_t lun) -{ +bool tud_msc_test_unit_ready_cb(uint8_t lun) { (void) lun; // RAM disk is ready until ejected @@ -215,10 +217,8 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun) // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size // Application update block count and block size -void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) -{ +void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size) { (void) lun; - *block_count = DISK_BLOCK_NUM; *block_size = DISK_BLOCK_SIZE; } @@ -226,18 +226,14 @@ void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_siz // Invoked when received Start Stop Unit command // - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage // - Start = 1 : active mode, if load_eject = 1 : load disk storage -bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) -{ +bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) { (void) lun; (void) power_condition; - if ( load_eject ) - { - if (start) - { + if (load_eject) { + if (start) { // load disk storage - }else - { + } else { // unload disk storage ejected = true; } @@ -248,116 +244,107 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo // Callback invoked when received READ10 command. // Copy disk's data to buffer (up to bufsize) and return number of copied bytes. -int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) -{ +int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize) { (void) lun; // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) { + if (lba >= DISK_BLOCK_NUM) { return TUD_MSC_RET_ERROR; } // Check for overflow of offset + bufsize - if ( lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE ) { + if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) { return TUD_MSC_RET_ERROR; } -#if CFG_EXAMPLE_MSC_ASYNC_IO - io_ops_t io_ops = { .is_read = true, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize }; + #if CFG_EXAMPLE_MSC_ASYNC_IO + io_ops_t io_ops = {.is_read = true, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize}; // Send IO operation to IO task TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS); return TUD_MSC_RET_ASYNC; -#else - uint8_t const* addr = msc_disk[lba] + offset; + #else + uint8_t const *addr = msc_disk[lba] + offset; memcpy(buffer, addr, bufsize); - tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS); - return bufsize; -#endif + #endif } -bool tud_msc_is_writable_cb (uint8_t lun) -{ +bool tud_msc_is_writable_cb (uint8_t lun) { (void) lun; -#ifdef CFG_EXAMPLE_MSC_READONLY + #ifdef CFG_EXAMPLE_MSC_READONLY return false; -#else + #else return true; -#endif + #endif } // Callback invoked when received WRITE10 command. // Process data in buffer to disk's storage and return number of written bytes -int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) -{ +int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) { // out of ramdisk - if ( lba >= DISK_BLOCK_NUM ) { + if (lba >= DISK_BLOCK_NUM) { return TUD_MSC_RET_ERROR; } // Check for overflow of offset + bufsize - if ( lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE ) { + if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) { return TUD_MSC_RET_ERROR; } -#ifdef CFG_EXAMPLE_MSC_READONLY - (void) lun; (void) buffer; + #ifdef CFG_EXAMPLE_MSC_READONLY + (void) lun; + (void) buffer; return bufsize; -#endif + #endif -#if CFG_EXAMPLE_MSC_ASYNC_IO - io_ops_t io_ops = { .is_read = false, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize }; + #if CFG_EXAMPLE_MSC_ASYNC_IO + io_ops_t io_ops = {.is_read = false, .lun = lun, .lba = lba, .offset = offset, .buffer = buffer, .bufsize = bufsize}; // Send IO operation to IO task TU_ASSERT(xQueueSend(io_queue, &io_ops, 0) == pdPASS); return TUD_MSC_RET_ASYNC; -#else - uint8_t* addr = msc_disk[lba] + offset; + #else + uint8_t *addr = msc_disk[lba] + offset; memcpy(addr, buffer, bufsize); tusb_time_delay_ms_api(CFG_EXAMPLE_MSC_IO_DELAY_MS); return bufsize; -#endif + #endif } // Callback invoked when received an SCSI command not in built-in list below // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE // - READ10 and WRITE10 has their own callbacks -int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) -{ +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) { // read10 & write10 has their own callback and MUST not be handled here - void const* response = NULL; + void const *response = NULL; int32_t resplen = 0; // most scsi handled is input bool in_xfer = true; - switch (scsi_cmd[0]) - { + switch (scsi_cmd[0]) { default: // Set Sense = Invalid Command Operation tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // negative means error -> tinyusb could stall and/or response with failed status resplen = -1; - break; + break; } // return resplen must not larger than bufsize - if ( resplen > bufsize ) resplen = bufsize; + if (resplen > bufsize) { resplen = bufsize; } - if ( response && (resplen > 0) ) - { - if(in_xfer) - { + if (response && (resplen > 0)) { + if (in_xfer) { memcpy(buffer, response, (size_t) resplen); - }else - { + } else { // SCSI output } } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index d70456287..c3f2f7fb5 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -114,12 +114,6 @@ // MSC Buffer size of Device Mass storage #define CFG_TUD_MSC_EP_BUFSIZE 512 -// Use async IO in example or not -#define CFG_EXAMPLE_MSC_ASYNC_IO 1 - -// Simulate read/write operation delay -#define CFG_EXAMPLE_MSC_IO_DELAY_MS 0 - #ifdef __cplusplus } #endif diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 709734b87..a8c52b6bd 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -828,8 +828,8 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { uint8_t rhport = p_msc->rhport; - if (nbytes < 0) { - // negative means error -> endpoint is stalled & status in CSW set to failed + if (nbytes == TUD_MSC_RET_ERROR) { + // error -> endpoint is stalled & status in CSW set to failed TU_LOG_DRV(" IO read() failed\r\n"); // set sense @@ -837,7 +837,7 @@ static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { set_sense_medium_not_present(p_cbw->lun); fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); - } else if (nbytes == 0) { + } else if (nbytes == TUD_MSC_RET_BUSY) { // zero means not ready -> fake a transfer complete so that this driver callback will fire again dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); } else { -- cgit v1.3.1 From c96cc4369f1b97efe85575f3e5633e38598e9fc2 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 1 Jul 2025 21:52:57 +0700 Subject: defer proc_async_io_done() --- src/class/msc/msc_device.c | 64 +++++++++++++++++++++++++--------------------- src/class/msc/msc_device.h | 9 +++---- 2 files changed, 39 insertions(+), 34 deletions(-) (limited to 'src/class/msc') diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index a8c52b6bd..747ad03ed 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -254,10 +254,10 @@ TU_ATTR_ALWAYS_INLINE static inline void set_sense_medium_not_present(uint8_t lu tud_msc_set_sense(lun, SCSI_SENSE_NOT_READY, 0x3A, 0x00); } -static void proc_async_io_done(void *bytes_processed) { +static void proc_async_io_done(void *bytes_io) { mscd_interface_t *p_msc = &_mscd_itf; TU_VERIFY(p_msc->pending_io, ); - const int32_t nbytes = (int32_t) (intptr_t) bytes_processed; + const int32_t nbytes = (int32_t) (intptr_t) bytes_io; const uint8_t cmd = p_msc->cbw.command[0]; p_msc->pending_io = 0; @@ -283,15 +283,9 @@ bool tud_msc_async_io_done(int32_t bytes_io, bool in_isr) { // Precheck to avoid queueing multiple RW done callback TU_VERIFY(_mscd_itf.pending_io); if (bytes_io == 0) { - bytes_io = TUD_MSC_RET_ERROR; // 0 is treated as error, no sense to call this with BUSY here + bytes_io = TUD_MSC_RET_ERROR; // 0 is treated as error, no reason to call this with BUSY here } - - if (in_isr) { - usbd_defer_func(proc_async_io_done, (void*) (intptr_t)bytes_io, in_isr); - } else { - proc_async_io_done((void*)(intptr_t) bytes_io); - } - + usbd_defer_func(proc_async_io_done, (void *) (intptr_t) bytes_io, in_isr); return true; } @@ -827,21 +821,26 @@ static void proc_read10_cmd(mscd_interface_t* p_msc) { } static void proc_read_io_data(mscd_interface_t* p_msc, int32_t nbytes) { - uint8_t rhport = p_msc->rhport; - if (nbytes == TUD_MSC_RET_ERROR) { - // error -> endpoint is stalled & status in CSW set to failed - TU_LOG_DRV(" IO read() failed\r\n"); - - // set sense - msc_cbw_t const* p_cbw = &p_msc->cbw; - set_sense_medium_not_present(p_cbw->lun); - - fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); - } else if (nbytes == TUD_MSC_RET_BUSY) { - // zero means not ready -> fake a transfer complete so that this driver callback will fire again - dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); - } else { + const uint8_t rhport = p_msc->rhport; + if (nbytes > 0) { TU_ASSERT(usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_epbuf.buf, (uint16_t) nbytes),); + } else { + // nbytes is status + switch (nbytes) { + case TUD_MSC_RET_ERROR: + // error -> endpoint is stalled & status in CSW set to failed + TU_LOG_DRV(" IO read() failed\r\n"); + set_sense_medium_not_present(p_msc->cbw.lun); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); + break; + + case TUD_MSC_RET_BUSY: + // not ready yet -> fake a transfer complete so that this driver callback will fire again + dcd_event_xfer_complete(rhport, p_msc->ep_in, 0, XFER_RESULT_SUCCESS, false); + break; + + default: break; + } } } @@ -886,13 +885,20 @@ static void proc_write10_host_data(mscd_interface_t* p_msc, uint32_t xferred_byt static void proc_write_io_data(mscd_interface_t* p_msc, uint32_t xferred_bytes, int32_t nbytes) { if (nbytes < 0) { - // negative means error -> failed this scsi op - TU_LOG_DRV(" IO write() failed\r\n"); - set_sense_medium_not_present(p_msc->cbw.lun); - fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); + // nbytes is status + switch (nbytes) { + case TUD_MSC_RET_ERROR: + // IO error -> failed this scsi op + TU_LOG_DRV(" IO write() failed\r\n"); + set_sense_medium_not_present(p_msc->cbw.lun); + fail_scsi_op(p_msc, MSC_CSW_STATUS_FAILED); + break; + + default: break; + } } else { if ((uint32_t)nbytes < xferred_bytes) { - // Application consume less than what we got (including zero) + // Application consume less than what we got including TUD_MSC_RET_BUSY (0) const uint32_t left_over = xferred_bytes - (uint32_t)nbytes; if (nbytes > 0) { memmove(_mscd_epbuf.buf, _mscd_epbuf.buf + nbytes, left_over); diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 2ad31c245..f2ea256b4 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -79,12 +79,11 @@ bool tud_msc_async_io_done(int32_t bytes_io, bool in_isr); - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE. - Application fill the buffer (up to bufsize) with address contents and return number of bytes read or status. - 0 < ret < bufsize: These bytes are transferred first and callback will be invoked again for remaining data. - - ret == TUD_MSC_RET_BUSY - Application is buys e.g disk I/O not ready. - Callback will be invoked again with the same parameters later on. - - ret == TUD_MSC_RET_ERROR + - TUD_MSC_RET_BUSY + Application is buys e.g disk I/O not ready. Callback will be invoked again with the same parameters later on. + - TUD_MSC_RET_ERROR error such as invalid address. This request will be STALLed and scsi command will be failed - - ret == TUD_MSC_RET_ASYNC + - TUD_MSC_RET_ASYNC Data I/O will be done asynchronously in a background task. Application should return immediately. tud_msc_async_io_done() must be called once IO/ is done to signal completion. */ -- cgit v1.3.1 From e9a78c52d00aa1cad8a9f80bbb2db5df70f1d8ad Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 11 Jul 2025 15:15:14 +0700 Subject: add tud_msc_inquiry2_cb() for full inquiry response --- examples/device/cdc_msc/src/msc_disk.c | 16 +++++---- examples/device/cdc_msc_freertos/src/msc_disk.c | 16 +++++---- .../device/dynamic_configuration/src/msc_disk.c | 17 ++++----- examples/device/msc_dual_lun/src/msc_disk_dual.c | 18 +++++----- src/class/msc/msc.h | 27 ++++++++++++--- src/class/msc/msc_device.c | 40 +++++++++++++--------- src/class/msc/msc_device.h | 7 +++- test/unit-test/test/device/msc/test_msc_device.c | 17 ++++----- 8 files changed, 100 insertions(+), 58 deletions(-) (limited to 'src/class/msc') diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 458681f58..6fd42dd80 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -116,18 +116,20 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { README_CONTENTS }; -// Invoked when received SCSI_CMD_INQUIRY -// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { +// Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response +// Some inquiry_resp's fields are already filled with default values, application can update them +// Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { (void) lun; - const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id, vid, strlen(vid)); - memcpy(product_id, pid, strlen(pid)); - memcpy(product_rev, rev, strlen(rev)); + memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); + memcpy(inquiry_resp->product_id, pid, strlen(pid)); + memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + + return sizeof(scsi_inquiry_resp_t); // 36 bytes } // Invoked when received Test Unit Ready command. diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index d1ff2f71b..3a652103f 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -188,16 +188,20 @@ static void io_task(void *params) { void msc_disk_init() {} #endif -// Invoked when received SCSI_CMD_INQUIRY -// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { +// Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response +// Some inquiry_resp's fields are already filled with default values, application can update them +// Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { (void) lun; const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id , vid, strlen(vid)); - memcpy(product_id , pid, strlen(pid)); - memcpy(product_rev, rev, strlen(rev)); + + memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); + memcpy(inquiry_resp->product_id, pid, strlen(pid)); + memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + + return sizeof(scsi_inquiry_resp_t); // 36 bytes } // Invoked when received Test Unit Ready command. diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index 10c3ac6fe..8987c06be 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -116,19 +116,20 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = README_CONTENTS }; -// Invoked when received SCSI_CMD_INQUIRY -// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) -{ +// Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response +// Some inquiry_resp's fields are already filled with default values, application can update them +// Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { (void) lun; - const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id , vid, strlen(vid)); - memcpy(product_id , pid, strlen(pid)); - memcpy(product_rev, rev, strlen(rev)); + memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); + memcpy(inquiry_resp->product_id, pid, strlen(pid)); + memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + + return sizeof(scsi_inquiry_resp_t); // 36 bytes } // Invoked when received Test Unit Ready command. diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index 1f7fb98c7..a1ad220b3 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -207,18 +207,20 @@ uint8_t tud_msc_get_maxlun_cb(void) { return 2; // dual LUN } -// Invoked when received SCSI_CMD_INQUIRY -// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { - (void) lun; // use same ID for both LUNs - +// Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response +// Some inquiry_resp's fields are already filled with default values, application can update them +// Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { + (void) lun; const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id , vid, strlen(vid)); - memcpy(product_id , pid, strlen(pid)); - memcpy(product_rev, rev, strlen(rev)); + memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); + memcpy(inquiry_resp->product_id, pid, strlen(pid)); + memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + + return sizeof(scsi_inquiry_resp_t); // 36 bytes } // Invoked when received Test Unit Ready command. diff --git a/src/class/msc/msc.h b/src/class/msc/msc.h index bbfd35a43..b2b44eac4 100644 --- a/src/class/msc/msc.h +++ b/src/class/msc/msc.h @@ -108,8 +108,7 @@ TU_VERIFY_STATIC(sizeof(msc_csw_t) == 13, "size is not correct"); //--------------------------------------------------------------------+ /// SCSI Command Operation Code -typedef enum -{ +typedef enum { SCSI_CMD_TEST_UNIT_READY = 0x00, ///< The SCSI Test Unit Ready command is used to determine if a device is ready to transfer data (read/write), i.e. if a disk has spun up, if a tape is loaded and ready etc. The device does not perform a self-test operation. SCSI_CMD_INQUIRY = 0x12, ///< The SCSI Inquiry command is used to obtain basic information from a target device. SCSI_CMD_MODE_SELECT_6 = 0x15, ///< provides a means for the application client to specify medium, logical unit, or peripheral device parameters to the device server. Device servers that implement the MODE SELECT(6) command shall also implement the MODE SENSE(6) command. Application clients should issue MODE SENSE(6) prior to each MODE SELECT(6) to determine supported mode pages, page lengths, and other parameters. @@ -124,8 +123,7 @@ typedef enum }scsi_cmd_type_t; /// SCSI Sense Key -typedef enum -{ +typedef enum { SCSI_SENSE_NONE = 0x00, ///< no specific Sense Key. This would be the case for a successful command SCSI_SENSE_RECOVERED_ERROR = 0x01, ///< Indicates the last command completed successfully with some recovery action performed by the disc drive. SCSI_SENSE_NOT_READY = 0x02, ///< Indicates the logical unit addressed cannot be accessed. @@ -141,6 +139,27 @@ typedef enum SCSI_SENSE_MISCOMPARE = 0x0e ///< Indicates that the source data did not match the data read from the medium. }scsi_sense_key_type_t; + +typedef enum { + SCSI_PDT_DIRECT_ACCESS = 0x0, + SCSI_PDT_SEQUENTIAL_ACCESS = 0x1, + SCSI_PDT_PRINTER = 0x2, + SCSI_PDT_PROCESSOR = 0x3, + SCSI_PDT_WRITE_ONCE = 0x4, + SCSI_PDT_CD_DVD = 0x5, + SCSI_PDT_SCANNER = 0x6, + SCSI_PDT_OPTICAL_DEVICE = 0x7, + SCSI_PDT_MEDIUM_CHANGER = 0x8, + SCSI_PDT_COMMUNICATIONS = 0x9, // obsolete + SCSI_PDT_RAID = 0x0c, + SCSI_PDT_ENCLOSURE_SERVICES = 0x0d, + SCSI_PDT_SIMPLIFIED_DIRECT_ACCESS = 0x0e, + SCSI_PDT_OPTICAL_CARD_READER = 0x0f, + SCSI_PDT_BRIDGE = 0x10, ///< Bridge device, e.g. USB to SCSI bridge + SCSI_PDT_OBJECT_BASED_STORAGE = 0x11, ///< Object-based storage device + SCSI_PDT_AUTOMATION_DRIVE_INTERFACE = 0x12, ///< Automation/Drive Interface (ADI) device +} scsi_peripheral_device_type_t; + //--------------------------------------------------------------------+ // SCSI Primary Command (SPC-4) //--------------------------------------------------------------------+ diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 747ad03ed..3a4b34e7e 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -41,6 +41,17 @@ #define TU_LOG_DRV(...) TU_LOG(CFG_TUD_MSC_LOG_LEVEL, __VA_ARGS__) +//--------------------------------------------------------------------+ +// Weak stubs: invoked if no strong implementation is available +//--------------------------------------------------------------------+ +TU_ATTR_WEAK void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { + (void) lun; (void) vendor_id; (void) product_id; (void) product_rev; +} +TU_ATTR_WEAK uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { + (void) lun; (void) inquiry_resp; + return 0; +} + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -731,22 +742,19 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ break; case SCSI_CMD_INQUIRY: { - scsi_inquiry_resp_t inquiry_rsp = { - .is_removable = 1, - .version = 2, - .response_data_format = 2, - .additional_length = sizeof(scsi_inquiry_resp_t) - 5, - }; - - // vendor_id, product_id, product_rev is space padded string - memset(inquiry_rsp.vendor_id , ' ', sizeof(inquiry_rsp.vendor_id)); - memset(inquiry_rsp.product_id , ' ', sizeof(inquiry_rsp.product_id)); - memset(inquiry_rsp.product_rev, ' ', sizeof(inquiry_rsp.product_rev)); - - tud_msc_inquiry_cb(lun, inquiry_rsp.vendor_id, inquiry_rsp.product_id, inquiry_rsp.product_rev); - - resplen = sizeof(inquiry_rsp); - TU_VERIFY(0 == tu_memcpy_s(buffer, bufsize, &inquiry_rsp, (size_t) resplen)); + scsi_inquiry_resp_t *inquiry_rsp = (scsi_inquiry_resp_t *) buffer; + tu_memclr(inquiry_rsp, sizeof(scsi_inquiry_resp_t)); + inquiry_rsp->is_removable = 1; + inquiry_rsp->version = 2; + inquiry_rsp->response_data_format = 2; + inquiry_rsp->additional_length = sizeof(scsi_inquiry_resp_t) - 5; + + resplen = (int32_t) tud_msc_inquiry2_cb(lun, inquiry_rsp); + if (resplen == 0) { + // stub callback with no response, use v1 callback + tud_msc_inquiry_cb(lun, inquiry_rsp->vendor_id, inquiry_rsp->product_id, inquiry_rsp->product_rev); + resplen = sizeof(scsi_inquiry_resp_t); + } } break; diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index f2ea256b4..195c6fa87 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -90,10 +90,15 @@ bool tud_msc_async_io_done(int32_t bytes_io, bool in_isr); int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize); int32_t tud_msc_write10_cb (uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize); -// Invoked when received SCSI_CMD_INQUIRY +// Invoked when received SCSI_CMD_INQUIRY, v1, application should use v2 if possible // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]); +// Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response +// Some inquiry_resp's fields are already filled with default values, application can update them +// Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp); + // Invoked when received Test Unit Ready command. // return true allowing host to read/write this LUN e.g SD card inserted bool tud_msc_test_unit_ready_cb(uint8_t lun); diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index 3ab46b0f9..e05e9c8b0 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -94,19 +94,20 @@ enum uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE]; -// Invoked when received SCSI_CMD_INQUIRY -// Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively -void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) -{ +// Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response +// Some inquiry_resp's fields are already filled with default values, application can update them +// Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { (void) lun; - const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; - memcpy(vendor_id , vid, strlen(vid)); - memcpy(product_id , pid, strlen(pid)); - memcpy(product_rev, rev, strlen(rev)); + memcpy(inquiry_resp->vendor_id, vid, strlen(vid)); + memcpy(inquiry_resp->product_id, pid, strlen(pid)); + memcpy(inquiry_resp->product_rev, rev, strlen(rev)); + + return sizeof(scsi_inquiry_resp_t); // 36 bytes } // Invoked when received Test Unit Ready command. -- cgit v1.3.1 From f5974b041e858badab1fbf187926efa8b79367cd Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 1 Aug 2025 22:44:32 +0700 Subject: add bufsize to tud_msc_inquiry2_cb() --- examples/device/cdc_msc/src/msc_disk.c | 3 ++- examples/device/cdc_msc_freertos/src/msc_disk.c | 5 +++-- examples/device/dynamic_configuration/src/msc_disk.c | 3 ++- examples/device/msc_dual_lun/src/msc_disk_dual.c | 3 ++- src/class/msc/msc_device.c | 6 +++--- src/class/msc/msc_device.h | 2 +- test/unit-test/test/device/msc/test_msc_device.c | 3 ++- 7 files changed, 15 insertions(+), 10 deletions(-) (limited to 'src/class/msc') diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c index 6fd42dd80..96f9f19ec 100644 --- a/examples/device/cdc_msc/src/msc_disk.c +++ b/examples/device/cdc_msc/src/msc_disk.c @@ -119,8 +119,9 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = { // Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response // Some inquiry_resp's fields are already filled with default values, application can update them // Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. -uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uint32_t bufsize) { (void) lun; + (void) bufsize; const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; diff --git a/examples/device/cdc_msc_freertos/src/msc_disk.c b/examples/device/cdc_msc_freertos/src/msc_disk.c index 3a652103f..3602c991d 100644 --- a/examples/device/cdc_msc_freertos/src/msc_disk.c +++ b/examples/device/cdc_msc_freertos/src/msc_disk.c @@ -166,7 +166,7 @@ static void io_task(void *params) { io_ops_t io_ops; while (1) { if (xQueueReceive(io_queue, &io_ops, portMAX_DELAY)) { - const uint8_t* addr = msc_disk[io_ops.lba] + io_ops.offset; + uint8_t* addr = (uint8_t*) (uintptr_t) (msc_disk[io_ops.lba] + io_ops.offset); int32_t nbytes = io_ops.bufsize; if (io_ops.is_read) { memcpy(io_ops.buffer, addr, io_ops.bufsize); @@ -191,8 +191,9 @@ void msc_disk_init() {} // Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response // Some inquiry_resp's fields are already filled with default values, application can update them // Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. -uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp, uint32_t bufsize) { (void) lun; + (void) bufsize; const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; diff --git a/examples/device/dynamic_configuration/src/msc_disk.c b/examples/device/dynamic_configuration/src/msc_disk.c index 8987c06be..ebc86e260 100644 --- a/examples/device/dynamic_configuration/src/msc_disk.c +++ b/examples/device/dynamic_configuration/src/msc_disk.c @@ -119,8 +119,9 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = // Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response // Some inquiry_resp's fields are already filled with default values, application can update them // Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. -uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uint32_t bufsize) { (void) lun; + (void) bufsize; const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c index a1ad220b3..98016808a 100644 --- a/examples/device/msc_dual_lun/src/msc_disk_dual.c +++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c @@ -210,8 +210,9 @@ uint8_t tud_msc_get_maxlun_cb(void) { // Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response // Some inquiry_resp's fields are already filled with default values, application can update them // Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. -uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uint32_t bufsize) { (void) lun; + uint32_t bufsize const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 3a4b34e7e..a32014c2d 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -47,8 +47,8 @@ TU_ATTR_WEAK void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) { (void) lun; (void) vendor_id; (void) product_id; (void) product_rev; } -TU_ATTR_WEAK uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { - (void) lun; (void) inquiry_resp; +TU_ATTR_WEAK uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uint32_t bufsize) { + (void) lun; (void) inquiry_resp; (void) bufsize; return 0; } @@ -749,7 +749,7 @@ static int32_t proc_builtin_scsi(uint8_t lun, uint8_t const scsi_cmd[16], uint8_ inquiry_rsp->response_data_format = 2; inquiry_rsp->additional_length = sizeof(scsi_inquiry_resp_t) - 5; - resplen = (int32_t) tud_msc_inquiry2_cb(lun, inquiry_rsp); + resplen = (int32_t) tud_msc_inquiry2_cb(lun, inquiry_rsp, bufsize); if (resplen == 0) { // stub callback with no response, use v1 callback tud_msc_inquiry_cb(lun, inquiry_rsp->vendor_id, inquiry_rsp->product_id, inquiry_rsp->product_rev); diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h index 195c6fa87..144b74f71 100644 --- a/src/class/msc/msc_device.h +++ b/src/class/msc/msc_device.h @@ -97,7 +97,7 @@ void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16 // Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response // Some inquiry_resp's fields are already filled with default values, application can update them // Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. -uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp); +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t *inquiry_resp, uint32_t bufsize); // Invoked when received Test Unit Ready command. // return true allowing host to read/write this LUN e.g SD card inserted diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index e05e9c8b0..49843a921 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -97,8 +97,9 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE]; // Invoked when received SCSI_CMD_INQUIRY, v2 with full inquiry response // Some inquiry_resp's fields are already filled with default values, application can update them // Return length of inquiry response, typically sizeof(scsi_inquiry_resp_t) (36 bytes), can be longer if included vendor data. -uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp) { +uint32_t tud_msc_inquiry2_cb(uint8_t lun, scsi_inquiry_resp_t* inquiry_resp, uint32_t bufsize) { (void) lun; + (void) bufsize; const char vid[] = "TinyUSB"; const char pid[] = "Mass Storage"; const char rev[] = "1.0"; -- cgit v1.3.1