From 1755bba509edf2d5bc49cadecb6e956497732b37 Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Mon, 15 Jan 2024 12:47:13 +0000 Subject: Add DWC2 Test Mode SUpport --- src/common/tusb_mcu.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'src/common') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 35f94efbc..146accabf 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -195,6 +195,7 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F7) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 + #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT // FS has 6, HS has 9 #define TUP_DCD_ENDPOINT_MAX 9 @@ -262,6 +263,7 @@ #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT #elif TU_CHECK_MCU(OPT_MCU_STM32L5) #define TUP_USBIP_FSDEV -- cgit v1.3.1 From 783a4f002b3c876aef6077ea57d0060b072e8ca9 Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Mon, 15 Jan 2024 16:45:58 +0100 Subject: Test mode support only for Hi-Speed devices --- src/common/tusb_mcu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/common') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index d74d7a2c5..ef28ac8fb 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -195,7 +195,6 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F7) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT // FS has 6, HS has 9 #define TUP_DCD_ENDPOINT_MAX 9 @@ -203,6 +202,7 @@ // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS + #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H7) @@ -265,13 +265,13 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32U5) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) #define TUP_DCD_ENDPOINT_MAX 9 #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT #else #define TUP_DCD_ENDPOINT_MAX 6 #endif -- cgit v1.3.1 From 5c7876d4444de25942778728d377ec77f74a75dd Mon Sep 17 00:00:00 2001 From: Matthias Schär Date: Thu, 28 Jul 2022 13:01:36 +0200 Subject: Fixed behavior of the PRCR register. Previous write protection will be recovered. --- .idea/cmake.xml | 2 +- examples/device/cdc_msc_freertos/src/freertos_hook.c | 3 ++- examples/device/hid_composite_freertos/src/freertos_hook.c | 3 ++- src/common/tusb_compiler.h | 2 +- 4 files changed, 6 insertions(+), 4 deletions(-) (limited to 'src/common') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index ebc6a0570..e4a08eaa6 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -75,7 +75,7 @@ - + diff --git a/examples/device/cdc_msc_freertos/src/freertos_hook.c b/examples/device/cdc_msc_freertos/src/freertos_hook.c index ab885947c..3cd27e08c 100644 --- a/examples/device/cdc_msc_freertos/src/freertos_hook.c +++ b/examples/device/cdc_msc_freertos/src/freertos_hook.c @@ -99,9 +99,10 @@ void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, Stack void vApplicationSetupTimerInterrupt(void) { /* Enable CMT0 */ + unsigned short oldPRCR = SYSTEM.PRCR.WORD; SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = (0xA5u<<8); + SYSTEM.PRCR.WORD = oldPRCR; CMT0.CMCNT = 0; CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); diff --git a/examples/device/hid_composite_freertos/src/freertos_hook.c b/examples/device/hid_composite_freertos/src/freertos_hook.c index ab885947c..3cd27e08c 100644 --- a/examples/device/hid_composite_freertos/src/freertos_hook.c +++ b/examples/device/hid_composite_freertos/src/freertos_hook.c @@ -99,9 +99,10 @@ void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, Stack void vApplicationSetupTimerInterrupt(void) { /* Enable CMT0 */ + unsigned short oldPRCR = SYSTEM.PRCR.WORD; SYSTEM.PRCR.WORD = (0xA5u<<8) | TU_BIT(1); MSTP(CMT0) = 0; - SYSTEM.PRCR.WORD = (0xA5u<<8); + SYSTEM.PRCR.WORD = oldPRCR; CMT0.CMCNT = 0; CMT0.CMCOR = (unsigned short)(((configPERIPHERAL_CLOCK_HZ/configTICK_RATE_HZ)-1)/128); diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 6f07bdd53..86d150c68 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -56,7 +56,7 @@ #elif defined (__STDC_VERSION__) && __STDC_VERSION__ >= 201112L #define TU_VERIFY_STATIC _Static_assert #elif defined(__CCRX__) - #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT(Line, __LINE__)[(const_expr) ? 1 : 0]; + #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT3(Line, __LINE__, _TU_COUNTER_)[(const_expr) ? 1 : 0]; #else #define TU_VERIFY_STATIC(const_expr, _mess) enum { TU_XSTRCAT(_verify_static_, _TU_COUNTER_) = 1/(!!(const_expr)) } #endif -- cgit v1.3.1 From 6c2f71ad19bbe9e3d346b5631ede9557b4252088 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 9 Apr 2024 17:12:15 +0700 Subject: make veryfi static in ccrx consistent with the rest --- src/common/tusb_compiler.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/common') diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 86d150c68..0d5570b1c 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -56,7 +56,7 @@ #elif defined (__STDC_VERSION__) && __STDC_VERSION__ >= 201112L #define TU_VERIFY_STATIC _Static_assert #elif defined(__CCRX__) - #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT3(Line, __LINE__, _TU_COUNTER_)[(const_expr) ? 1 : 0]; + #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT(_verify_static_, _TU_COUNTER_)[(const_expr) ? 1 : 0]; #else #define TU_VERIFY_STATIC(const_expr, _mess) enum { TU_XSTRCAT(_verify_static_, _TU_COUNTER_) = 1/(!!(const_expr)) } #endif -- cgit v1.3.1 From 1e41b9725a946eb6bbbd5cc96b804dbca0bcf7fa Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 10 Apr 2024 10:13:36 +0700 Subject: remove the usage of TU_BIT() and TU_GENMASK() from tusb_types.h --- src/common/tusb_types.h | 31 ++++++++++--------------------- 1 file changed, 10 insertions(+), 21 deletions(-) (limited to 'src/common') diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 2c5dce723..b571f9b72 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -24,12 +24,8 @@ * This file is part of the TinyUSB stack. */ -/** \ingroup group_usb_definitions - * \defgroup USBDef_Type USB Types - * @{ */ - -#ifndef _TUSB_TYPES_H_ -#define _TUSB_TYPES_H_ +#ifndef TUSB_TYPES_H_ +#define TUSB_TYPES_H_ #include #include @@ -212,8 +208,8 @@ typedef enum { } device_capability_type_t; enum { - TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = TU_BIT(5), - TUSB_DESC_CONFIG_ATT_SELF_POWERED = TU_BIT(6), + TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP = 1u << 5, + TUSB_DESC_CONFIG_ATT_SELF_POWERED = 1u << 6, }; #define TUSB_DESC_CONFIG_POWER_MA(x) ((x)/2) @@ -274,11 +270,11 @@ TU_ATTR_BIT_FIELD_ORDER_BEGIN typedef struct TU_ATTR_PACKED { uint8_t bLength ; ///< Size of this descriptor in bytes. uint8_t bDescriptorType ; ///< DEVICE Descriptor Type. - uint16_t bcdUSB ; ///< BUSB Specification Release Number in Binary-Coded Decimal (i.e., 2.10 is 210H). This field identifies the release of the USB Specification with which the device and its descriptors are compliant. + uint16_t bcdUSB ; ///< BUSB Specification Release Number in Binary-Coded Decimal (i.e., 2.10 is 210H). - uint8_t bDeviceClass ; ///< Class code (assigned by the USB-IF). \li If this field is reset to zero, each interface within a configuration specifies its own class information and the various interfaces operate independently. \li If this field is set to a value between 1 and FEH, the device supports different class specifications on different interfaces and the interfaces may not operate independently. This value identifies the class definition used for the aggregate interfaces. \li If this field is set to FFH, the device class is vendor-specific. - uint8_t bDeviceSubClass ; ///< Subclass code (assigned by the USB-IF). These codes are qualified by the value of the bDeviceClass field. \li If the bDeviceClass field is reset to zero, this field must also be reset to zero. \li If the bDeviceClass field is not set to FFH, all values are reserved for assignment by the USB-IF. - uint8_t bDeviceProtocol ; ///< Protocol code (assigned by the USB-IF). These codes are qualified by the value of the bDeviceClass and the bDeviceSubClass fields. If a device supports class-specific protocols on a device basis as opposed to an interface basis, this code identifies the protocols that the device uses as defined by the specification of the device class. \li If this field is reset to zero, the device does not use class-specific protocols on a device basis. However, it may use classspecific protocols on an interface basis. \li If this field is set to FFH, the device uses a vendor-specific protocol on a device basis. + uint8_t bDeviceClass ; ///< Class code (assigned by the USB-IF). + uint8_t bDeviceSubClass ; ///< Subclass code (assigned by the USB-IF). + uint8_t bDeviceProtocol ; ///< Protocol code (assigned by the USB-IF). uint8_t bMaxPacketSize0 ; ///< Maximum packet size for endpoint zero (only 8, 16, 32, or 64 are valid). For HS devices is fixed to 64. uint16_t idVendor ; ///< Vendor ID (assigned by the USB-IF). @@ -493,15 +489,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t tu_edpt_addr(uint8_t num, uint8_t di } TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_edpt_packet_size(tusb_desc_endpoint_t const* desc_ep) { - return tu_le16toh(desc_ep->wMaxPacketSize) & TU_GENMASK(10, 0); + return tu_le16toh(desc_ep->wMaxPacketSize) & 0x7FF; } #if CFG_TUSB_DEBUG -TU_ATTR_ALWAYS_INLINE static inline const char *tu_edpt_dir_str(tusb_dir_t dir) { - tu_static const char *str[] = {"out", "in"}; - return str[dir]; -} - TU_ATTR_ALWAYS_INLINE static inline const char *tu_edpt_type_str(tusb_xfer_type_t t) { tu_static const char *str[] = {"control", "isochronous", "bulk", "interrupt"}; return str[t]; @@ -541,6 +532,4 @@ uint8_t const * tu_desc_find3(uint8_t const* desc, uint8_t const* end, uint8_t b } #endif -#endif /* _TUSB_TYPES_H_ */ - -/** @} */ +#endif // TUSB_TYPES_H_ -- cgit v1.3.1 From 3442a87d5b52112a8bc4672322d488703e4ee23e Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 17 Apr 2024 20:06:13 +0700 Subject: - clang h743 build and run cdc_msc ok - switch unit test back to gcc, since path to clang conflict on local setup (x86 and arm) --- examples/build_system/cmake/cpu/cortex-m7.cmake | 1 - examples/build_system/cmake/toolchain/common.cmake | 2 +- hw/bsp/board.c | 19 +++++++++++++++++++ hw/bsp/stm32h7/family.cmake | 7 +++---- src/common/tusb_common.h | 1 + src/portable/synopsys/dwc2/dcd_dwc2.c | 6 +++--- test/unit-test/project.yml | 12 ++++++------ 7 files changed, 33 insertions(+), 15 deletions(-) (limited to 'src/common') diff --git a/examples/build_system/cmake/cpu/cortex-m7.cmake b/examples/build_system/cmake/cpu/cortex-m7.cmake index f7684af84..b0f84b76b 100644 --- a/examples/build_system/cmake/cpu/cortex-m7.cmake +++ b/examples/build_system/cmake/cpu/cortex-m7.cmake @@ -18,7 +18,6 @@ elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS --target=arm-none-eabi -mcpu=cortex-m7 - -mfloat-abi=hard -mfpu=fpv5-d16 ) set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index 6c6d54c74..bbd670b65 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -45,7 +45,7 @@ elseif (TOOLCHAIN STREQUAL "clang") list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS -Wl,--print-memory-usage -Wl,--gc-sections - -Wl,--cref + #-Wl,--cref ) endif () diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 23b4b6628..996ac9263 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -108,6 +108,25 @@ TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) { // st->st_mode = S_IFCHR; //} +// Clang use picolibc +#if defined(__clang__) +static int cl_putc(char c, FILE *f) { + (void) f; + return sys_write(0, &c, 1); +} + +static int cl_getc(FILE* f) { + (void) f; + char c; + return sys_read(0, &c, 1) > 0 ? c : -1; +} + +static FILE __stdio = FDEV_SETUP_STREAM(cl_putc, cl_getc, NULL, _FDEV_SETUP_RW); +FILE *const stdin = &__stdio; +__strong_reference(stdin, stdout); +__strong_reference(stdin, stderr); +#endif + int board_getchar(void) { char c; return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index d852ce21c..ab9ba3fbb 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -56,10 +56,8 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - target_compile_options(${BOARD_TARGET} PUBLIC - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) @@ -75,6 +73,7 @@ function(add_board_target BOARD_TARGET) ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC + #-ldummyhost "LINKER:--script=${LD_FILE_GNU}" ) endif () diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 1f08ce4ed..0d4082c03 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -65,6 +65,7 @@ // Standard Headers #include #include +#include #include #include #include diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index a824226c7..f17d30f06 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -174,7 +174,7 @@ static bool fifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { // Check if free space is available TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size / 4); _allocated_fifo_words_tx += fifo_size; - TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %lu", fifo_size * 4, + TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %" PRIu32, fifo_size * 4, _dwc2_controller[rhport].ep_fifo_size - _allocated_fifo_words_tx * 4); // DIEPTXF starts at FIFO #1. @@ -419,9 +419,9 @@ void print_dwc2_info(dwc2_regs_t* dwc2) { volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; TU_LOG(DWC2_DEBUG, "guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); for (size_t i = 0; i < 5; i++) { - TU_LOG(DWC2_DEBUG, "0x%08lX, ", p[i]); + TU_LOG(DWC2_DEBUG, "0x%08" PRIX32 ", ", p[i]); } - TU_LOG(DWC2_DEBUG, "0x%08lX\r\n", p[5]); + TU_LOG(DWC2_DEBUG, "0x%08" PRIX32 "\r\n", p[5]); } #endif diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index 82528f68c..7fbbabfe6 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -81,20 +81,20 @@ :tools: :test_compiler: - :executable: clang - :name: 'clang compiler' + :executable: gcc + :name: 'gcc compiler' :arguments: - -I"$": COLLECTION_PATHS_TEST_TOOLCHAIN_INCLUDE #expands to -I search paths - -I"$": COLLECTION_PATHS_TEST_SUPPORT_SOURCE_INCLUDE_VENDOR #expands to -I search paths - -D$: COLLECTION_DEFINES_TEST_AND_VENDOR #expands to all -D defined symbols - - -fsanitize=address + #- -fsanitize=address - -c ${1} #source code input file (Ruby method call param list sub) - -o ${2} #object file output (Ruby method call param list sub) :test_linker: - :executable: clang - :name: 'clang linker' + :executable: gcc + :name: 'gcc linker' :arguments: - - -fsanitize=address + #- -fsanitize=address - ${1} #list of object files to link (Ruby method call param list sub) - -o ${2} #executable file output (Ruby method call param list sub) -- cgit v1.3.1 From 5f473d51cf04a7bfeca71bce09a9b3a4c2b2a7d1 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 18 Apr 2024 20:00:45 +0200 Subject: Fix IAR breakpoint test. --- src/common/tusb_verify.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'src/common') diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 8aa66b4df..71406dacf 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -76,7 +76,8 @@ #endif // Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33. M55 -#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ + defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) #define TU_BREAKPOINT() do \ { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ -- cgit v1.3.1 From 2e995d7cf4b2971e3ca7167a097b99832c8d61ce Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Apr 2024 20:23:40 +0700 Subject: adding support for esp32 for use with max3421e host --- examples/device/board_test/src/tusb_config.h | 2 +- examples/device/cdc_msc_freertos/src/main.c | 6 +-- examples/device/cdc_msc_freertos/src/tusb_config.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 6 +-- .../hid_composite_freertos/src/tusb_config.h | 2 +- examples/device/video_capture/src/main.c | 4 +- examples/device/video_capture/src/tusb_config.h | 2 +- examples/device/video_capture_2ch/src/main.c | 4 +- .../device/video_capture_2ch/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 6 +-- .../host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- hw/bsp/board_api.h | 2 +- .../boards/adafruit_feather_esp32_v2/board.cmake | 2 + .../boards/adafruit_feather_esp32_v2/board.h | 53 ++++++++++++++++++++++ hw/bsp/espressif/boards/family.c | 19 ++++---- .../components/tinyusb_src/CMakeLists.txt | 12 +---- hw/bsp/espressif/family.cmake | 6 +-- src/common/tusb_mcu.h | 5 +- src/portable/analog/max3421/hcd_max3421.c | 2 +- src/tusb_option.h | 2 + 21 files changed, 94 insertions(+), 49 deletions(-) create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h (limited to 'src/common') diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 1a27cc87f..36eafe807 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -49,7 +49,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index e94e8eaec..607d40270 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -111,14 +111,14 @@ int main(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 91efe7d40..e743c9148 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ff2cb635e..2bd545bc2 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -113,14 +113,14 @@ int main(void) xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 3ba9bf311..0689e0f23 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 2a2b0961f..ddb51e03a 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -288,7 +288,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -344,7 +344,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index bdfc37d87..21483a2da 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index eb1cf2580..e8c2ec6b0 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -296,7 +296,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -352,7 +352,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index fe66d63b5..43c7dfc90 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 7d246af67..f3495ab28 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 069cbdc90..a6cb4d460 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -107,14 +107,14 @@ int main(void) { xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 35de5ee50..0aab2cd2f 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index f21a32371..eee9ed9c5 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -39,7 +39,7 @@ extern "C" { #include "tusb.h" #if CFG_TUSB_OS == OPT_OS_FREERTOS -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake new file mode 100644 index 000000000..18c956714 --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32") diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h new file mode 100644 index 000000000..0c53df06b --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 0 +#define NEOPIXEL_POWER_PIN 2 +#define NEOPIXEL_POWER_STATE 1 + +#define BUTTON_PIN 38 +#define BUTTON_STATE_ACTIVE 0 + +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI3_HOST +#define MAX3421_SCK_PIN 5 +#define MAX3421_MOSI_PIN 19 +#define MAX3421_MISO_PIN 21 +#define MAX3421_CS_PIN 33 +#define MAX3421_INTR_PIN 15 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 5599d1504..02e478a0c 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -30,8 +30,12 @@ #include "esp_rom_gpio.h" #include "esp_mac.h" #include "hal/gpio_ll.h" + +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) #include "hal/usb_hal.h" #include "soc/usb_periph.h" +static void configure_pins(usb_hal_context_t* usb); +#endif #include "driver/gpio.h" #include "driver/uart.h" @@ -56,7 +60,6 @@ static led_strip_handle_t led_strip; static void max3421_init(void); #endif -static void configure_pins(usb_hal_context_t* usb); //--------------------------------------------------------------------+ // Implementation @@ -100,7 +103,6 @@ void board_init(void) { }; ESP_ERROR_CHECK(led_strip_new_rmt_device(&strip_config, &rmt_config, &led_strip)); - led_strip_clear(led_strip); // off #endif @@ -109,6 +111,7 @@ void board_init(void) { gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) // USB Controller Hal init periph_module_reset(PERIPH_USB_MODULE); periph_module_enable(PERIPH_USB_MODULE); @@ -118,12 +121,14 @@ void board_init(void) { }; usb_hal_init(&hal); configure_pins(&hal); +#endif #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif } +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) static void configure_pins(usb_hal_context_t* usb) { /* usb_periph_iopins currently configures USB_OTG as USB Device. * Introduce additional parameters in usb_hal_context_t when adding support @@ -153,6 +158,7 @@ static void configure_pins(usb_hal_context_t* usb) { gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); } } +#endif //--------------------------------------------------------------------+ // Board porting API @@ -208,15 +214,12 @@ SemaphoreHandle_t max3421_intr_sem; static void IRAM_ATTR max3421_isr_handler(void* arg) { (void) arg; // arg is gpio num - gpio_set_level(13, 1); BaseType_t xHigherPriorityTaskWoken = pdFALSE; xSemaphoreGiveFromISR(max3421_intr_sem, &xHigherPriorityTaskWoken); if (xHigherPriorityTaskWoken) { portYIELD_FROM_ISR(); } - - gpio_set_level(13, 0); } static void max3421_intr_task(void* param) { @@ -250,16 +253,12 @@ static void max3421_init(void) { spi_device_interface_config_t max3421_cfg = { .mode = 0, - .clock_speed_hz = 26000000, + .clock_speed_hz = 20000000, // S2/S3 can work with 26 Mhz, but esp32 seems only work up to 20 Mhz .spics_io_num = -1, // manual control CS .queue_size = 1 }; ESP_ERROR_CHECK(spi_bus_add_device(MAX3421_SPI_HOST, &max3421_cfg, &max3421_spi)); - // debug - gpio_set_direction(13, GPIO_MODE_OUTPUT); - gpio_set_level(13, 0); - // Interrupt pin max3421_intr_sem = xSemaphoreCreateBinary(); xTaskCreate(max3421_intr_task, "max3421 intr", 2048, NULL, configMAX_PRIORITIES - 2, NULL); diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index abe276910..8bdb3802e 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -5,17 +5,7 @@ set(includes_public) set(compile_options) set(tusb_src "${CMAKE_CURRENT_SOURCE_DIR}/../../../../../src") -if(target STREQUAL "esp32s3") - set(tusb_mcu "OPT_MCU_ESP32S3") -elseif(target STREQUAL "esp32s2") - set(tusb_mcu "OPT_MCU_ESP32S2") -else() - # CONFIG_TINYUSB dependency has been guaranteed by Kconfig logic, - # So it's not possible that cmake goes here - message(FATAL_ERROR "TinyUSB is not support on ${target}.") - return() -endif() - +string(TOUPPER OPT_MCU_${target} tusb_mcu) list(APPEND compile_definitions CFG_TUSB_MCU=${tusb_mcu} CFG_TUSB_OS=OPT_OS_FREERTOS diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index 92a9bcb04..eb97401c3 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -3,11 +3,7 @@ cmake_minimum_required(VERSION 3.5) # Apply board specific content i.e IDF_TARGET must be set before project.cmake is included include("${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake") -if(IDF_TARGET STREQUAL "esp32s2") - set(FAMILY_MCUS ESP32S2) -elseif(IDF_TARGET STREQUAL "esp32s3") - set(FAMILY_MCUS ESP32S3) -endif() +string(TOUPPER ${IDF_TARGET} FAMILY_MCUS) # Add example src and bsp directories set(EXTRA_COMPONENT_DIRS "src" "${CMAKE_CURRENT_LIST_DIR}/boards" "${CMAKE_CURRENT_LIST_DIR}/components") diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0ae2573cd..2c4d7461d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -329,6 +329,9 @@ #define TUP_USBIP_DWC2 #define TUP_DCD_ENDPOINT_MAX 6 +#elif TU_CHECK_MCU(OPT_MCU_ESP32) && (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) + #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" + //--------------------------------------------------------------------+ // Dialog //--------------------------------------------------------------------+ @@ -426,7 +429,7 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#ifndef TUP_DCD_ENDPOINT_MAX +#if CFG_TUD_ENABLED && !defined(TUP_DCD_ENDPOINT_MAX) #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 39afb7505..053169bf2 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -484,8 +484,8 @@ bool hcd_init(uint8_t rhport) { // v1 is 0x01, v2 is 0x12, v3 is 0x13 uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); - TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); TU_LOG2_HEX(revision); + TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); // reset reg_write(rhport, USBCTL_ADDR, USBCTL_CHIPRES, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index cbcb69edd..25412d432 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -119,6 +119,8 @@ // Espressif #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 +#define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog #define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x -- cgit v1.3.1 From 03ccc8d8dfe21fc158fc5eb8a4f3f90f425f8a3b Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Apr 2024 20:41:44 +0700 Subject: revert a change in tusb_mcu --- src/common/tusb_mcu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/common') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 2c4d7461d..00526bdba 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -429,7 +429,7 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#if CFG_TUD_ENABLED && !defined(TUP_DCD_ENDPOINT_MAX) +#if !defined(TUP_DCD_ENDPOINT_MAX) #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif -- cgit v1.3.1 From 223ce56625474764dc00229c44731858abcf4f29 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 26 Apr 2024 00:10:57 +0700 Subject: - add esp32 c3, c6 mcu option - skip breakpoint for espressif riscv --- examples/host/cdc_msc_hid_freertos/src/main.c | 5 ++++- src/common/tusb_mcu.h | 4 ++-- src/common/tusb_verify.h | 2 +- src/portable/analog/max3421/hcd_max3421.c | 2 ++ src/tusb_option.h | 2 ++ 5 files changed, 11 insertions(+), 4 deletions(-) (limited to 'src/common') diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index a6cb4d460..fa799aede 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -126,7 +126,10 @@ static void usb_host_task(void *param) { (void) param; // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + if (!tuh_init(BOARD_TUH_RHPORT)) { + printf("Failed to init USB Host Stack\r\n"); + vTaskSuspend(NULL); + } if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 00526bdba..5a567f2d5 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -429,8 +429,8 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#if !defined(TUP_DCD_ENDPOINT_MAX) - #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" +#if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED +#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 71406dacf..0a9549c99 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -84,7 +84,7 @@ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -#elif defined(__riscv) +#elif defined(__riscv) && !TUP_MCU_ESPRESSIF #define TU_BREAKPOINT() do { __asm("ebreak\n"); } while(0) #elif defined(_mips) diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 053169bf2..4dc93d2d8 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -479,6 +479,8 @@ bool hcd_init(uint8_t rhport) { _hcd_data.spi_mutex = osal_mutex_create(&_hcd_data.spi_mutexdef); #endif + // NOTE: driver does not seem to work without nRST pin signal + // full duplex, interrupt negative edge reg_write(rhport, PINCTL_ADDR, _tuh_cfg.pinctl | PINCTL_FDUPSPI, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index 25412d432..3ead20ee7 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -120,6 +120,8 @@ #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 #define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define OPT_MCU_ESP32C3 903 ///< Espressif ESP32-C3 +#define OPT_MCU_ESP32C6 904 ///< Espressif ESP32-C6 #define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog -- cgit v1.3.1 From c303b5d81d3dd9d5dc9f831af704e6d40366d7cf Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 29 Apr 2024 22:35:55 +0200 Subject: Guard const addr fifo functions with TUP_MEM_CONST_ADDR. --- src/common/tusb_fifo.c | 31 +++++++++++++++++++++++++++++-- src/common/tusb_fifo.h | 4 ++++ src/common/tusb_mcu.h | 4 ++++ 3 files changed, 37 insertions(+), 2 deletions(-) (limited to 'src/common') diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index 76696396b..8a0fd4417 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -62,7 +62,9 @@ TU_ATTR_ALWAYS_INLINE static inline void _ff_unlock(osal_mutex_t mutex) typedef enum { TU_FIFO_COPY_INC, ///< Copy from/to an increasing source/destination address - default mode +#ifdef TUP_MEM_CONST_ADDR TU_FIFO_COPY_CST_FULL_WORDS, ///< Copy from/to a constant source/destination address - required for e.g. STM32 to write into USB hardware FIFO +#endif } tu_fifo_copy_mode_t; bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable) @@ -92,6 +94,7 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si // Pull & Push //--------------------------------------------------------------------+ +#ifdef TUP_MEM_CONST_ADDR // Intended to be used to read from hardware USB FIFO in e.g. STM32 where all data is read from a constant address // Code adapted from dcd_synopsys.c // TODO generalize with configurable 1 byte or 4 byte each read @@ -140,6 +143,7 @@ static void _ff_pull_const_addr(void * app_buf, const uint8_t * ff_buf, uint16_t *reg_tx = tmp32; } } +#endif // send one item to fifo WITHOUT updating write pointer static inline void _ff_push(tu_fifo_t* f, void const * app_buf, uint16_t rel) @@ -179,7 +183,7 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t memcpy(f->buffer, ((uint8_t const*) app_buf) + lin_bytes, wrap_bytes); } break; - +#ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: // Intended for hardware buffers from which it can be read word by word only if(n <= lin_count) @@ -224,6 +228,7 @@ static void _ff_push_n(tu_fifo_t* f, void const * app_buf, uint16_t n, uint16_t if (wrap_bytes > 0) _ff_push_const_addr(ff_buf, app_buf, wrap_bytes); } break; +#endif default: break; } } @@ -265,7 +270,7 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, memcpy((uint8_t*) app_buf + lin_bytes, f->buffer, wrap_bytes); } break; - +#ifdef TUP_MEM_CONST_ADDR case TU_FIFO_COPY_CST_FULL_WORDS: if ( n <= lin_count ) { @@ -310,6 +315,7 @@ static void _ff_pull_n(tu_fifo_t* f, void* app_buf, uint16_t n, uint16_t rd_ptr, // Read data wrapped part if (wrap_bytes > 0) _ff_pull_const_addr(app_buf, ff_buf, wrap_bytes); } +#endif break; default: break; @@ -727,10 +733,29 @@ uint16_t tu_fifo_read_n(tu_fifo_t* f, void * buffer, uint16_t n) return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_INC); } +#ifdef TUP_MEM_CONST_ADDR +/******************************************************************************/ +/*! + @brief This function will read n elements from the array index specified by + the read pointer and increment the read index. + This function checks for an overflow and corrects read pointer if required. + The dest address will not be incremented which is useful for writing to registers. + + @param[in] f + Pointer to the FIFO buffer to manipulate + @param[in] buffer + The pointer to data location + @param[in] n + Number of element that buffer can afford + + @returns number of items read from the FIFO + */ +/******************************************************************************/ uint16_t tu_fifo_read_n_const_addr_full_words(tu_fifo_t* f, void * buffer, uint16_t n) { return _tu_fifo_read_n(f, buffer, n, TU_FIFO_COPY_CST_FULL_WORDS); } +#endif /******************************************************************************/ /*! @@ -839,6 +864,7 @@ uint16_t tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n) return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_INC); } +#ifdef TUP_MEM_CONST_ADDR /******************************************************************************/ /*! @brief This function will write n elements into the array index specified by @@ -858,6 +884,7 @@ uint16_t tu_fifo_write_n_const_addr_full_words(tu_fifo_t* f, const void * data, { return _tu_fifo_write_n(f, data, n, TU_FIFO_COPY_CST_FULL_WORDS); } +#endif /******************************************************************************/ /*! diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 2d9f5e667..e50d9afd4 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -156,11 +156,15 @@ bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_si bool tu_fifo_write (tu_fifo_t* f, void const * p_data); uint16_t tu_fifo_write_n (tu_fifo_t* f, void const * p_data, uint16_t n); +#ifdef TUP_MEM_CONST_ADDR uint16_t tu_fifo_write_n_const_addr_full_words (tu_fifo_t* f, const void * data, uint16_t n); +#endif bool tu_fifo_read (tu_fifo_t* f, void * p_buffer); uint16_t tu_fifo_read_n (tu_fifo_t* f, void * p_buffer, uint16_t n); +#ifdef TUP_MEM_CONST_ADDR uint16_t tu_fifo_read_n_const_addr_full_words (tu_fifo_t* f, void * buffer, uint16_t n); +#endif bool tu_fifo_peek (tu_fifo_t* f, void * p_buffer); uint16_t tu_fifo_peek_n (tu_fifo_t* f, void * p_buffer, uint16_t n); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 5a567f2d5..c69bc9995 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -448,4 +448,8 @@ #define TUP_DCD_EDPT_ISO_ALLOC #endif +#if defined(TUP_USBIP_DWC2) + #define TUP_MEM_CONST_ADDR +#endif + #endif -- cgit v1.3.1 From ea3f1d39e8bfc82facc7b3e503d7c71f9119de2b Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 May 2024 13:29:29 +0700 Subject: add cmake for pi zero (renamed from pi zero_w), build but the flash size seem wrong (only 24 bytes for text) --- .clang-format | 6 -- examples/build_system/cmake/cpu/arm1176jzf-s.cmake | 19 ++++ examples/build_system/make/cpu/arm1176.mk | 9 -- examples/build_system/make/cpu/arm1176jzf-s.mk | 9 ++ .../boards/raspberrypi_zero/board.cmake | 8 ++ .../broadcom_32bit/boards/raspberrypi_zero/board.h | 38 ++++++++ .../boards/raspberrypi_zero/board.mk | 5 + .../boards/raspberrypi_zero_w/board.h | 38 -------- .../boards/raspberrypi_zero_w/board.mk | 5 - hw/bsp/broadcom_32bit/family.c | 11 +++ hw/bsp/broadcom_32bit/family.cmake | 107 +++++++++++++++++++++ hw/bsp/broadcom_32bit/family.mk | 5 +- src/common/tusb_fifo.h | 12 +-- src/common/tusb_mcu.h | 2 +- src/common/tusb_verify.h | 3 +- 15 files changed, 206 insertions(+), 71 deletions(-) delete mode 100644 .clang-format create mode 100644 examples/build_system/cmake/cpu/arm1176jzf-s.cmake delete mode 100644 examples/build_system/make/cpu/arm1176.mk create mode 100644 examples/build_system/make/cpu/arm1176jzf-s.mk create mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake create mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h create mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk delete mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h delete mode 100644 hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk create mode 100644 hw/bsp/broadcom_32bit/family.cmake (limited to 'src/common') diff --git a/.clang-format b/.clang-format deleted file mode 100644 index 4369c29fe..000000000 --- a/.clang-format +++ /dev/null @@ -1,6 +0,0 @@ ---- -BreakBeforeBraces: Linux -ColumnLimit: '200' -ReflowComments: 'true' - -... diff --git a/examples/build_system/cmake/cpu/arm1176jzf-s.cmake b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake new file mode 100644 index 000000000..11bb52f30 --- /dev/null +++ b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake @@ -0,0 +1,19 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mcpu=arm1176jzf-s + ) + # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=arm1176jzf-s + -mfpu=none + -mfloat-abi=soft + ) + #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + +endif () diff --git a/examples/build_system/make/cpu/arm1176.mk b/examples/build_system/make/cpu/arm1176.mk deleted file mode 100644 index 022ccf7ad..000000000 --- a/examples/build_system/make/cpu/arm1176.mk +++ /dev/null @@ -1,9 +0,0 @@ -ifeq ($(TOOLCHAIN),gcc) - CFLAGS += \ - -mcpu=arm1176jzf-s \ - -else ifeq ($(TOOLCHAIN),iar) - #CFLAGS += --cpu cortex-a53 - #ASFLAGS += --cpu cortex-a53 - -endif diff --git a/examples/build_system/make/cpu/arm1176jzf-s.mk b/examples/build_system/make/cpu/arm1176jzf-s.mk new file mode 100644 index 000000000..022ccf7ad --- /dev/null +++ b/examples/build_system/make/cpu/arm1176jzf-s.mk @@ -0,0 +1,9 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mcpu=arm1176jzf-s \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake new file mode 100644 index 000000000..2b8cc19e0 --- /dev/null +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.cmake @@ -0,0 +1,8 @@ +set(CMAKE_SYSTEM_PROCESSOR arm1176jzf-s CACHE INTERNAL "System Processor") +#set(SUFFIX "") + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + BCM_VERSION=2835 + ) +endfunction() diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h new file mode 100644 index 000000000..84a106346 --- /dev/null +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.h @@ -0,0 +1,38 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk new file mode 100644 index 000000000..7a248ed24 --- /dev/null +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero/board.mk @@ -0,0 +1,5 @@ +CPU_CORE = arm1176jzf-s +CFLAGS += -DBCM_VERSION=2835 \ + -DCFG_TUSB_MCU=OPT_MCU_BCM2835 + +SUFFIX = diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h deleted file mode 100644 index 84a106346..000000000 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#ifdef __cplusplus - } -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk deleted file mode 100644 index 052033230..000000000 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -CPU_CORE = arm1176 -CFLAGS += -DBCM_VERSION=2835 \ - -DCFG_TUSB_MCU=OPT_MCU_BCM2835 - -SUFFIX = diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index 664b4dcaf..626565e34 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -27,6 +27,13 @@ #include "bsp/board_api.h" #include "board.h" +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + #include "broadcom/cpu.h" #include "broadcom/gpio.h" #include "broadcom/interrupts.h" @@ -34,6 +41,10 @@ #include "broadcom/caches.h" #include "broadcom/vcmailbox.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + // LED #define LED_PIN 18 #define LED_STATE_ON 1 diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake new file mode 100644 index 000000000..223c85e48 --- /dev/null +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -0,0 +1,107 @@ +include_guard() + +set(MCU_DIR ${TOP}/hw/mcu/broadcom) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS BCM2835 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${MCU_DIR}/broadcom/link.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${MCU_DIR}/broadcom/boot.s) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${MCU_DIR}/broadcom/gen/interrupt_handlers.c + ${MCU_DIR}/broadcom/gpio.c + ${MCU_DIR}/broadcom/interrupts.c + ${MCU_DIR}/broadcom/mmu.c + ${MCU_DIR}/broadcom/caches.c + ${MCU_DIR}/broadcom/vcmailbox.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_compile_options(${BOARD_TARGET} PUBLIC + -O0 + -ffreestanding + -mgeneral-regs-only + -fno-exceptions + -std=c17 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MCU_DIR} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostdlib -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_BCM2835 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk index cf68e21ee..e15bd93f7 100644 --- a/hw/bsp/broadcom_32bit/family.mk +++ b/hw/bsp/broadcom_32bit/family.mk @@ -1,5 +1,4 @@ MCU_DIR = hw/mcu/broadcom -DEPS_SUBMODULES += $(MCU_DIR) include $(TOP)/$(BOARD_PATH)/board.mk @@ -27,15 +26,13 @@ SRC_C += \ $(MCU_DIR)/broadcom/caches.c \ $(MCU_DIR)/broadcom/vcmailbox.c -SKIP_NANOLIB = 1 - LD_FILE = $(MCU_DIR)/broadcom/link$(SUFFIX).ld INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/$(MCU_DIR) -SRC_S += $(MCU_DIR)/broadcom/boot$(SUFFIX).S +SRC_S += $(MCU_DIR)/broadcom/boot$(SUFFIX).s $(BUILD)/kernel$(SUFFIX).img: $(BUILD)/$(PROJECT).elf $(OBJCOPY) -O binary $^ $@ diff --git a/src/common/tusb_fifo.h b/src/common/tusb_fifo.h index 2d9f5e667..0de576601 100644 --- a/src/common/tusb_fifo.h +++ b/src/common/tusb_fifo.h @@ -145,13 +145,13 @@ bool tu_fifo_clear(tu_fifo_t *f); bool tu_fifo_config(tu_fifo_t *f, void* buffer, uint16_t depth, uint16_t item_size, bool overwritable); #if OSAL_MUTEX_REQUIRED - TU_ATTR_ALWAYS_INLINE static inline - void tu_fifo_config_mutex(tu_fifo_t *f, osal_mutex_t wr_mutex, osal_mutex_t rd_mutex) { - f->mutex_wr = wr_mutex; - f->mutex_rd = rd_mutex; - } +TU_ATTR_ALWAYS_INLINE static inline +void tu_fifo_config_mutex(tu_fifo_t *f, osal_mutex_t wr_mutex, osal_mutex_t rd_mutex) { + f->mutex_wr = wr_mutex; + f->mutex_rd = rd_mutex; +} #else - #define tu_fifo_config_mutex(_f, _wr_mutex, _rd_mutex) +#define tu_fifo_config_mutex(_f, _wr_mutex, _rd_mutex) #endif bool tu_fifo_write (tu_fifo_t* f, void const * p_data); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 5a567f2d5..8d58be2a1 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -430,7 +430,7 @@ #endif #if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED -#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" + #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 0a9549c99..dde0550d3 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -78,8 +78,7 @@ // Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33. M55 #if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8_1M_MAIN__) || \ defined(__ARM7M__) || defined (__ARM7EM__) || defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) - #define TU_BREAKPOINT() do \ - { \ + #define TU_BREAKPOINT() do { \ volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -- cgit v1.3.1 From e250b82377aa9c1433c6235501c72dd079544c75 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 13 May 2024 22:26:19 +0200 Subject: Adjust logic. --- src/common/tusb_mcu.h | 5 +++-- src/device/dcd.h | 6 +++--- src/device/usbd.c | 20 +++++++++++--------- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 ++-- src/tusb_option.h | 5 +++++ 5 files changed, 24 insertions(+), 16 deletions(-) (limited to 'src/common') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index e489e93e7..3a7d6ad33 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -195,6 +195,7 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 + #define TUP_USBIP_DWC2_TEST_MODE // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9 #define TUP_DCD_ENDPOINT_MAX 6 @@ -209,7 +210,7 @@ // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS - #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT + #define TUP_USBIP_DWC2_TEST_MODE #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H7) @@ -278,7 +279,7 @@ defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) #define TUP_DCD_ENDPOINT_MAX 9 #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT + #define TUP_USBIP_DWC2_TEST_MODE #else #define TUP_DCD_ENDPOINT_MAX 6 #endif diff --git a/src/device/dcd.h b/src/device/dcd.h index b71b99869..9447d6d9d 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -97,8 +97,7 @@ typedef struct TU_ATTR_ALIGNED(4) { }; } dcd_event_t; -typedef enum _test_mode_selector -{ +typedef enum { TEST_J = 1, TEST_K, TEST_SE0_NAK, @@ -158,12 +157,13 @@ void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; // Enable/Disable Start-of-frame interrupt. Default is disabled void dcd_sof_enable(uint8_t rhport, bool en); +#if CFG_TUD_TEST_MODE // Check if the test mode is supported, returns true is test mode selector is supported bool dcd_check_test_mode_support(test_mode_t test_selector) TU_ATTR_WEAK; // Put device into a test mode (needs power cycle to quit) void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) TU_ATTR_WEAK; - +#endif //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ diff --git a/src/device/usbd.c b/src/device/usbd.c index 7dfdc8476..25d890dc7 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -313,8 +313,9 @@ TU_ATTR_ALWAYS_INLINE static inline bool queue_event(dcd_event_t const * event, static bool process_control_request(uint8_t rhport, tusb_control_request_t const * p_request); static bool process_set_config(uint8_t rhport, uint8_t cfg_num); static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const * p_request); +#if CFG_TUD_TEST_MODE static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); - +#endif // from usbd_control.c void usbd_control_reset(void); void usbd_control_set_request(tusb_control_request_t const *request); @@ -766,16 +767,16 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const tud_control_status(rhport, p_request); break; - #if !defined(TUSB_NO_TEST_MODE_SUPPORT) +#if CFG_TUD_TEST_MODE // Support for TEST_MODE - case TUSB_REQ_FEATURE_TEST_MODE: + case TUSB_REQ_FEATURE_TEST_MODE: { // Only handle the test mode if supported and valid TU_VERIFY(dcd_enter_test_mode && dcd_check_test_mode_support && 0 == tu_u16_low(p_request->wIndex)); uint8_t selector = tu_u16_high(p_request->wIndex); // Stall request if the selected test mode isn't supported - if (!dcd_check_test_mode_support(selector)) + if (!dcd_check_test_mode_support((test_mode_t)selector)) { TU_LOG_USBD(" Unsupported Test Mode (test selector index: %d)\r\n", selector); @@ -788,8 +789,9 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); usbd_control_set_complete_callback(process_test_mode_cb); - break; - #endif /* !TUSB_NO_TEST_MODE_SUPPORT */ + break; + } +#endif /* CFG_TUD_TEST_MODE */ // Stall unsupported feature selector default: return false; @@ -1121,7 +1123,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } } -#if !defined(TUSB_NO_TEST_MODE_SUPPORT) +#if CFG_TUD_TEST_MODE static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) { // At this point it should already be ensured that dcd_enter_test_mode() is defined @@ -1129,11 +1131,11 @@ static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_req // Only enter the test mode after the request for it has completed TU_VERIFY(CONTROL_STAGE_ACK == stage); - dcd_enter_test_mode(rhport, tu_u16_high(request->wIndex)); + dcd_enter_test_mode(rhport, (test_mode_t)tu_u16_high(request->wIndex)); return true; } -#endif /* !TUSB_NO_TEST_MODE_SUPPORT */ +#endif /* CFG_TUD_TEST_MODE */ //--------------------------------------------------------------------+ // DCD Event Handler diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index c9580655f..fd2f08453 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1195,7 +1195,7 @@ void dcd_int_handler(uint8_t rhport) { // } } -#if defined(TUP_USBIP_DWC2_TEST_MODE_SUPPORT) && !defined(TUSB_NO_TEST_MODE_SUPPORT) +#if defined(TUP_USBIP_DWC2_TEST_MODE) && CFG_TUD_TEST_MODE bool dcd_check_test_mode_support(test_mode_t test_selector) { // Check if test mode selector is unsupported @@ -1218,6 +1218,6 @@ void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (test_selector << DCTL_TCTL_Pos); } -#endif /* TUP_USBIP_DWC2_TEST_MODE_SUPPORT && !TUSB_NO_TEST_MODE_SUPPORT */ +#endif /* TUP_USBIP_DWC2_TEST_MODE && CFG_TUD_TEST_MODE */ #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 8d5527936..058427e0e 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -364,6 +364,11 @@ #define CFG_TUD_INTERFACE_MAX 16 #endif +// USB 2.0 compliance test mode support +#ifndef CFG_TUD_TEST_MODE + #define CFG_TUD_TEST_MODE 0 +#endif + //------------- Device Class Driver -------------// #ifndef CFG_TUD_BTH #define CFG_TUD_BTH 0 -- cgit v1.3.1 From db60fa1c63ae58c205e43e144253dab6815bb2d1 Mon Sep 17 00:00:00 2001 From: Matthew Tran Date: Sun, 19 Nov 2023 18:26:40 -0800 Subject: add CH32V20x USB OTG/FS driver --- .gitignore | 1 + README.rst | 2 +- docs/reference/dependencies.rst | 1 + docs/reference/supported.rst | 6 +- examples/device/cdc_msc_freertos/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 1 + examples/device/msc_dual_lun/skip.txt | 1 + examples/device/video_capture/skip.txt | 1 + hw/bsp/ch32v20x/boards/nanoch32v203/board.h | 17 + hw/bsp/ch32v20x/boards/nanoch32v203/board.mk | 5 + hw/bsp/ch32v20x/ch32v20x_conf.h | 36 + hw/bsp/ch32v20x/ch32v20x_it.h | 15 + hw/bsp/ch32v20x/core_riscv.h | 572 ++++++++++++++ hw/bsp/ch32v20x/family.c | 82 ++ hw/bsp/ch32v20x/family.mk | 50 ++ hw/bsp/ch32v20x/system_ch32v20x.c | 976 ++++++++++++++++++++++++ hw/bsp/ch32v20x/system_ch32v20x.h | 29 + hw/bsp/ch32v20x/wch-riscv.cfg | 18 + hw/bsp/ch32v307/family.mk | 5 + hw/bsp/fomu/family.mk | 4 + hw/bsp/gd32vf103/family.mk | 5 + src/class/video/video_device.c | 2 +- src/common/tusb_mcu.h | 4 + src/portable/wch/ch32_usbfs_reg.h | 77 ++ src/portable/wch/dcd_ch32_usbfs.c | 304 ++++++++ src/tusb_option.h | 1 + tools/get_deps.py | 3 + tools/iar_template.ipcf | 1 + 28 files changed, 2215 insertions(+), 5 deletions(-) create mode 100644 hw/bsp/ch32v20x/boards/nanoch32v203/board.h create mode 100644 hw/bsp/ch32v20x/boards/nanoch32v203/board.mk create mode 100644 hw/bsp/ch32v20x/ch32v20x_conf.h create mode 100644 hw/bsp/ch32v20x/ch32v20x_it.h create mode 100644 hw/bsp/ch32v20x/core_riscv.h create mode 100644 hw/bsp/ch32v20x/family.c create mode 100644 hw/bsp/ch32v20x/family.mk create mode 100644 hw/bsp/ch32v20x/system_ch32v20x.c create mode 100644 hw/bsp/ch32v20x/system_ch32v20x.h create mode 100644 hw/bsp/ch32v20x/wch-riscv.cfg create mode 100644 src/portable/wch/ch32_usbfs_reg.h create mode 100644 src/portable/wch/dcd_ch32_usbfs.c (limited to 'src/common') diff --git a/.gitignore b/.gitignore index 56ae7600f..7a37d65dc 100644 --- a/.gitignore +++ b/.gitignore @@ -82,6 +82,7 @@ hw/mcu/st/stm32l5xx_hal_driver hw/mcu/st/stm32u5xx_hal_driver hw/mcu/st/stm32wbxx_hal_driver hw/mcu/ti +hw/mcu/wch/ch32v20x hw/mcu/wch/ch32v307 hw/mcu/wch/ch32f20x lib/CMSIS_5 diff --git a/README.rst b/README.rst index 8c3145d33..dbe75adc8 100644 --- a/README.rst +++ b/README.rst @@ -157,7 +157,7 @@ Following CPUs are supported, check out `Supported Devices`_ for comprehensive l +--------------+------------------------------------------------------------+ | ValentyUSB | eptri | +--------------+------------------------------------------------------------+ -| WCH | CH32F20x, CH32V307, | +| WCH | CH32F20x, CH32V20x, CH32V307 | +--------------+------------------------------------------------------------+ License diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 6ba6692e9..3a98594ff 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -55,6 +55,7 @@ hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/ hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c123 hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x +hw/mcu/wch/ch32v20x https://github.com/openwch/ch32v20x.git de6d68c654340d7f27b00cebbfc9aa2740a1abc2 ch32v20x hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 17761f5cf9dbbf2dcf665b7c04934188add20082 ch32v307 lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 20285262657d1b482d132d20d755c8c330d55c1f imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2xstm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git 4ff01a7a4a51f53b44496aefee1e3c0071b7b173 all diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 7e7be25a4..3ca203e88 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -128,9 +128,9 @@ Supported MCUs +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| WCH | CH32V307 | ✔ | | ✔ | ch32v307 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | CH32F20x | ✔ | | ✔ | ch32f205 | | +| WCH | CH32F20x | ✔ | | ✔ | ch32f205 | | +| | CH32V20x | ✔ | | ✖ | ch32v20x | | +| | CH32V307 | ✔ | | ✔ | ch32v307 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index eb434c23b..457ddb760 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index a6f96b288..6aaa27661 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/msc_dual_lun/skip.txt b/examples/device/msc_dual_lun/skip.txt index a9e3a99b1..4d607dc05 100644 --- a/examples/device/msc_dual_lun/skip.txt +++ b/examples/device/msc_dual_lun/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:SAMD11 mcu:MKL25ZXX family:espressif diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index 5898664a2..714cabeec 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.h b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h new file mode 100644 index 000000000..c8d28d90f --- /dev/null +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h @@ -0,0 +1,17 @@ +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_PORT GPIOA +#define LED_PIN GPIO_Pin_15 +#define LED_STATE_ON 0 +#define LED_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE) + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.mk b/hw/bsp/ch32v20x/boards/nanoch32v203/board.mk new file mode 100644 index 000000000..75dc05457 --- /dev/null +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.mk @@ -0,0 +1,5 @@ +CFLAGS += \ + -DCH32V20x_D6 + +SRC_S += \ + $(CH32V20X_SDK_SRC)/Startup/startup_ch32v20x_D6.S diff --git a/hw/bsp/ch32v20x/ch32v20x_conf.h b/hw/bsp/ch32v20x/ch32v20x_conf.h new file mode 100644 index 000000000..949297fe6 --- /dev/null +++ b/hw/bsp/ch32v20x/ch32v20x_conf.h @@ -0,0 +1,36 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_conf.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : Library configuration file. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_CONF_H +#define __CH32V20x_CONF_H + +#include "ch32v20x_adc.h" +#include "ch32v20x_bkp.h" +#include "ch32v20x_can.h" +#include "ch32v20x_crc.h" +#include "ch32v20x_dbgmcu.h" +#include "ch32v20x_dma.h" +#include "ch32v20x_exti.h" +#include "ch32v20x_flash.h" +#include "ch32v20x_gpio.h" +#include "ch32v20x_i2c.h" +#include "ch32v20x_iwdg.h" +#include "ch32v20x_pwr.h" +#include "ch32v20x_rcc.h" +#include "ch32v20x_rtc.h" +#include "ch32v20x_spi.h" +#include "ch32v20x_tim.h" +#include "ch32v20x_usart.h" +#include "ch32v20x_wwdg.h" +#include "ch32v20x_it.h" +#include "ch32v20x_misc.h" + +#endif /* __CH32V20x_CONF_H */ diff --git a/hw/bsp/ch32v20x/ch32v20x_it.h b/hw/bsp/ch32v20x/ch32v20x_it.h new file mode 100644 index 000000000..e49c61ae2 --- /dev/null +++ b/hw/bsp/ch32v20x/ch32v20x_it.h @@ -0,0 +1,15 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_it.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains the headers of the interrupt handlers. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_IT_H +#define __CH32V20x_IT_H + +#endif /* __CH32V20x_IT_H */ diff --git a/hw/bsp/ch32v20x/core_riscv.h b/hw/bsp/ch32v20x/core_riscv.h new file mode 100644 index 000000000..be1b52a6c --- /dev/null +++ b/hw/bsp/ch32v20x/core_riscv.h @@ -0,0 +1,572 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : core_riscv.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : RISC-V Core Peripheral Access Layer Header File for CH32V20x +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CORE_RISCV_H__ +#define __CORE_RISCV_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* IO definitions */ +#ifdef __cplusplus + #define __I volatile /* defines 'read only' permissions */ +#else + #define __I volatile const /* defines 'read only' permissions */ +#endif +#define __O volatile /* defines 'write only' permissions */ +#define __IO volatile /* defines 'read / write' permissions */ + +/* Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef __I uint64_t vuc64; /* Read Only */ +typedef __I uint32_t vuc32; /* Read Only */ +typedef __I uint16_t vuc16; /* Read Only */ +typedef __I uint8_t vuc8; /* Read Only */ + +typedef const uint64_t uc64; /* Read Only */ +typedef const uint32_t uc32; /* Read Only */ +typedef const uint16_t uc16; /* Read Only */ +typedef const uint8_t uc8; /* Read Only */ + +typedef __I int64_t vsc64; /* Read Only */ +typedef __I int32_t vsc32; /* Read Only */ +typedef __I int16_t vsc16; /* Read Only */ +typedef __I int8_t vsc8; /* Read Only */ + +typedef const int64_t sc64; /* Read Only */ +typedef const int32_t sc32; /* Read Only */ +typedef const int16_t sc16; /* Read Only */ +typedef const int8_t sc8; /* Read Only */ + +typedef __IO uint64_t vu64; +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef uint64_t u64; +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef __IO int64_t vs64; +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef int64_t s64; +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef enum {NoREADY = 0, READY = !NoREADY} ErrorStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +#define RV_STATIC_INLINE static inline + +/* memory mapped structure for Program Fast Interrupt Controller (PFIC) */ +typedef struct{ + __I uint32_t ISR[8]; + __I uint32_t IPR[8]; + __IO uint32_t ITHRESDR; + __IO uint32_t RESERVED; + __IO uint32_t CFGR; + __I uint32_t GISR; + __IO uint8_t VTFIDR[4]; + uint8_t RESERVED0[12]; + __IO uint32_t VTFADDR[4]; + uint8_t RESERVED1[0x90]; + __O uint32_t IENR[8]; + uint8_t RESERVED2[0x60]; + __O uint32_t IRER[8]; + uint8_t RESERVED3[0x60]; + __O uint32_t IPSR[8]; + uint8_t RESERVED4[0x60]; + __O uint32_t IPRR[8]; + uint8_t RESERVED5[0x60]; + __IO uint32_t IACTR[8]; + uint8_t RESERVED6[0xE0]; + __IO uint8_t IPRIOR[256]; + uint8_t RESERVED7[0x810]; + __IO uint32_t SCTLR; +}PFIC_Type; + +/* memory mapped structure for SysTick */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t SR; + __IO uint64_t CNT; + __IO uint64_t CMP; +}SysTick_Type; + +#define PFIC ((PFIC_Type *) 0xE000E000 ) +#define NVIC PFIC +#define NVIC_KEY1 ((uint32_t)0xFA050000) +#define NVIC_KEY2 ((uint32_t)0xBCAF0000) +#define NVIC_KEY3 ((uint32_t)0xBEEF0000) + +#define SysTick ((SysTick_Type *) 0xE000F000) + +/********************************************************************* + * @fn __enable_irq + * + * @brief Enable Global Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __enable_irq(void) +{ + __asm volatile ("csrw 0x800, %0" : : "r" (0x6088) ); +} + +/********************************************************************* + * @fn __disable_irq + * + * @brief Disable Global Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __disable_irq(void) +{ + __asm volatile ("csrw 0x800, %0" : : "r" (0x6000) ); +} + +/********************************************************************* + * @fn __NOP + * + * @brief nop + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __NOP(void) +{ + __asm volatile ("nop"); +} + +/********************************************************************* + * @fn NVIC_EnableIRQ + * + * @brief Disable Interrupt + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->IENR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_DisableIRQ + * + * @brief Disable Interrupt + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->IRER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_GetStatusIRQ + * + * @brief Get Interrupt Enable State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Pending Enable + * 0 - Interrupt Pending Disable + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetStatusIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_GetPendingIRQ + * + * @brief Get Interrupt Pending State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Pending Enable + * 0 - Interrupt Pending Disable + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->IPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_SetPendingIRQ + * + * @brief Set Interrupt Pending + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->IPSR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_ClearPendingIRQ + * + * @brief Clear Interrupt Pending + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->IPRR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_GetActive + * + * @brief Get Interrupt Active State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Active + * 0 - Interrupt No Active + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IACTR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_SetPriority + * + * @brief Set Interrupt Priority + * + * @param IRQn - Interrupt Numbers + * priority - bit7 - Pre-emption Priority + * bit[6:5] - Subpriority + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint8_t priority) +{ + NVIC->IPRIOR[(uint32_t)(IRQn)] = priority; +} + +/********************************************************************* + * @fn __WFI + * + * @brief Wait for Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFI(void) +{ + NVIC->SCTLR &= ~(1<<3); // wfi + asm volatile ("wfi"); +} + +/********************************************************************* + * @fn _SEV + * + * @brief Set Event + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _SEV(void) +{ + uint32_t t; + + t = NVIC->SCTLR; + NVIC->SCTLR |= (1<<3)|(1<<5); + NVIC->SCTLR = (NVIC->SCTLR & ~(1<<5)) | ( t & (1<<5)); +} + +/********************************************************************* + * @fn _WFE + * + * @brief Wait for Events + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _WFE(void) +{ + NVIC->SCTLR |= (1<<3); + asm volatile ("wfi"); +} + +/********************************************************************* + * @fn __WFE + * + * @brief Wait for Events + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFE(void) +{ + _SEV(); + _WFE(); + _WFE(); +} + +/********************************************************************* + * @fn SetVTFIRQ + * + * @brief Set VTF Interrupt + * + * @param addr - VTF interrupt service function base address. + * IRQn - Interrupt Numbers + * num - VTF Interrupt Numbers + * NewState - DISABLE or ENABLE + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void SetVTFIRQ(uint32_t addr, IRQn_Type IRQn, uint8_t num, FunctionalState NewState){ + if(num > 3) return ; + + if (NewState != DISABLE) + { + NVIC->VTFIDR[num] = IRQn; + NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)|0x1); + } + else{ + NVIC->VTFIDR[num] = IRQn; + NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)&(~0x1)); + } +} + +/********************************************************************* + * @fn NVIC_SystemReset + * + * @brief Initiate a system reset request + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SystemReset(void) +{ + NVIC->CFGR = NVIC_KEY3|(1<<7); +} + +/********************************************************************* + * @fn __AMOADD_W + * + * @brief Atomic Add with 32bit value + * Atomically ADD 32bit value with value in memory using amoadd.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ADDed + * + * @return return memory value + add value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOADD_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoadd.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOAND_W + * + * @brief Atomic And with 32bit value + * Atomically AND 32bit value with value in memory using amoand.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ANDed + * + * @return return memory value & and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOAND_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoand.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMAX_W + * + * @brief Atomic signed MAX with 32bit value + * Atomically signed max compare 32bit value with value in memory using amomax.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the bigger value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMAX_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amomax.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMAXU_W + * + * @brief Atomic unsigned MAX with 32bit value + * Atomically unsigned max compare 32bit value with value in memory using amomaxu.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return return the bigger value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMAXU_W(volatile uint32_t *addr, uint32_t value) +{ + uint32_t result; + + __asm volatile ("amomaxu.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMIN_W + * + * @brief Atomic signed MIN with 32bit value + * Atomically signed min compare 32bit value with value in memory using amomin.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the smaller value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMIN_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amomin.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMINU_W + * + * @brief Atomic unsigned MIN with 32bit value + * Atomically unsigned min compare 32bit value with value in memory using amominu.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the smaller value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMINU_W(volatile uint32_t *addr, uint32_t value) +{ + uint32_t result; + + __asm volatile ("amominu.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOOR_W + * + * @brief Atomic OR with 32bit value + * Atomically OR 32bit value with value in memory using amoor.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ORed + * + * @return return memory value | and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOOR_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoor.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOSWAP_W + * + * @brief Atomically swap new 32bit value into memory using amoswap.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * newval - New value to be stored into the address + * + * @return return the original value in memory + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOSWAP_W(volatile uint32_t *addr, uint32_t newval) +{ + uint32_t result; + + __asm volatile ("amoswap.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(newval) : "memory"); + return result; +} + +/********************************************************************* + * @fn __AMOXOR_W + * + * @brief Atomic XOR with 32bit value + * Atomically XOR 32bit value with value in memory using amoxor.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be XORed + * + * @return return memory value ^ and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOXOR_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoxor.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/* Core_Exported_Functions */ +extern uint32_t __get_MSTATUS(void); +extern void __set_MSTATUS(uint32_t value); +extern uint32_t __get_MISA(void); +extern void __set_MISA(uint32_t value); +extern uint32_t __get_MTVEC(void); +extern void __set_MTVEC(uint32_t value); +extern uint32_t __get_MSCRATCH(void); +extern void __set_MSCRATCH(uint32_t value); +extern uint32_t __get_MEPC(void); +extern void __set_MEPC(uint32_t value); +extern uint32_t __get_MCAUSE(void); +extern void __set_MCAUSE(uint32_t value); +extern uint32_t __get_MTVAL(void); +extern void __set_MTVAL(uint32_t value); +extern uint32_t __get_MVENDORID(void); +extern uint32_t __get_MARCHID(void); +extern uint32_t __get_MIMPID(void); +extern uint32_t __get_MHARTID(void); +extern uint32_t __get_SP(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c new file mode 100644 index 000000000..247dacde6 --- /dev/null +++ b/hw/bsp/ch32v20x/family.c @@ -0,0 +1,82 @@ +#include +#include "ch32v20x.h" +#include "bsp/board_api.h" +#include "board.h" + +__attribute__((interrupt)) +void USBHD_IRQHandler(void) { + tud_int_handler(0); +} + +#if CFG_TUSB_OS == OPT_OS_NONE + +volatile uint32_t system_ticks = 0; + +__attribute__((interrupt)) +void SysTick_Handler(void) { + SysTick->SR = 0; + system_ticks++; +} + +uint32_t SysTick_Config(uint32_t ticks) { + NVIC_EnableIRQ(SysTicK_IRQn); + SysTick->CTLR = 0; + SysTick->SR = 0; + SysTick->CNT = 0; + SysTick->CMP = ticks-1; + SysTick->CTLR = 0xF; + return 0; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void board_init(void) { + __disable_irq(); + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(SystemCoreClock / 1000); +#endif + + switch (SystemCoreClock) { + case 48000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); break; + case 96000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div2); break; + case 144000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div3); break; + default: TU_ASSERT(0,); break; + } + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); + + LED_CLOCK_EN(); + GPIO_InitTypeDef GPIO_InitStructure = { + .GPIO_Pin = LED_PIN, + .GPIO_Mode = GPIO_Mode_Out_OD, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(LED_PORT, &GPIO_InitStructure); + + __enable_irq(); + board_delay(2); +} + +void board_led_write(bool state) { + GPIO_WriteBit(LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) { + return false; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + (void) buf; + (void) len; + return len; +} diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk new file mode 100644 index 000000000..2d94f19fb --- /dev/null +++ b/hw/bsp/ch32v20x/family.mk @@ -0,0 +1,50 @@ +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +CROSS_COMPILE ?= riscv-none-elf- + +# Submodules +CH32V20X_SDK = hw/mcu/wch/ch32v20x +DEPS_SUBMODULES += $(CH32V20X_SDK) + +# WCH-SDK paths +CH32V20X_SDK_SRC = $(CH32V20X_SDK)/EVT/EXAM/SRC + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -march=rv32imac_zicsr \ + -mabi=ilp32 \ + -mcmodel=medany \ + -ffunction-sections \ + -fdata-sections \ + -ffat-lto-objects \ + -flto \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_CH32V20X \ + -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED \ + +LDFLAGS_GCC += \ + -Wl,--gc-sections \ + -specs=nosys.specs \ + -specs=nano.specs \ + +LD_FILE = $(CH32V20X_SDK_SRC)/Ld/Link.ld + +SRC_C += \ + src/portable/wch/dcd_ch32_usbfs.c \ + $(CH32V20X_SDK_SRC)/Core/core_riscv.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_gpio.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_misc.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_rcc.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_usart.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(CH32V20X_SDK_SRC)/Peripheral/inc \ + +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V + +# wch-link is not supported yet in official openOCD yet. We need to either use +# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or +# 2. compiled from modified source https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +flash: $(BUILD)/$(PROJECT).elf + openocd -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit diff --git a/hw/bsp/ch32v20x/system_ch32v20x.c b/hw/bsp/ch32v20x/system_ch32v20x.c new file mode 100644 index 000000000..588f3165a --- /dev/null +++ b/hw/bsp/ch32v20x/system_ch32v20x.c @@ -0,0 +1,976 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v20x.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : CH32V20x Device Peripheral Access Layer System Source File. + * For HSE = 32Mhz (CH32V208x/CH32V203RBT6) + * For HSE = 8Mhz (other CH32V203x) +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x.h" + +/* +* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after +* reset the HSI is used as SYSCLK source). +* If none of the define below is enabled, the HSI is used as System clock source. +*/ +//#define SYSCLK_FREQ_HSE HSE_VALUE +//#define SYSCLK_FREQ_48MHz_HSE 48000000 +//#define SYSCLK_FREQ_56MHz_HSE 56000000 +//#define SYSCLK_FREQ_72MHz_HSE 72000000 +#define SYSCLK_FREQ_96MHz_HSE 96000000 +//#define SYSCLK_FREQ_120MHz_HSE 120000000 +//#define SYSCLK_FREQ_144MHz_HSE 144000000 +//#define SYSCLK_FREQ_HSI HSI_VALUE +//#define SYSCLK_FREQ_48MHz_HSI 48000000 +//#define SYSCLK_FREQ_56MHz_HSI 56000000 +//#define SYSCLK_FREQ_72MHz_HSI 72000000 +//#define SYSCLK_FREQ_96MHz_HSI 96000000 +//#define SYSCLK_FREQ_120MHz_HSI 120000000 +//#define SYSCLK_FREQ_144MHz_HSI 144000000 + +/* Clock Definitions */ +#ifdef SYSCLK_FREQ_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */ +#else +uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */ + +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/* system_private_function_proto_types */ +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE +static void SetSysClockToHSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSE +static void SetSysClockTo48_HSE( void ); +#elif defined SYSCLK_FREQ_56MHz_HSE +static void SetSysClockTo56_HSE( void ); +#elif defined SYSCLK_FREQ_72MHz_HSE +static void SetSysClockTo72_HSE( void ); +#elif defined SYSCLK_FREQ_96MHz_HSE +static void SetSysClockTo96_HSE( void ); +#elif defined SYSCLK_FREQ_120MHz_HSE +static void SetSysClockTo120_HSE( void ); +#elif defined SYSCLK_FREQ_144MHz_HSE +static void SetSysClockTo144_HSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSI +static void SetSysClockTo48_HSI( void ); +#elif defined SYSCLK_FREQ_56MHz_HSI +static void SetSysClockTo56_HSI( void ); +#elif defined SYSCLK_FREQ_72MHz_HSI +static void SetSysClockTo72_HSI( void ); +#elif defined SYSCLK_FREQ_96MHz_HSI +static void SetSysClockTo96_HSI( void ); +#elif defined SYSCLK_FREQ_120MHz_HSI +static void SetSysClockTo120_HSI( void ); +#elif defined SYSCLK_FREQ_144MHz_HSI +static void SetSysClockTo144_HSI( void ); + +#endif + +/********************************************************************* + * @fn SystemInit + * + * @brief Setup the microcontroller system Initialize the Embedded Flash Interface, + * the PLL and update the SystemCoreClock variable. + * + * @return none + */ +void SystemInit (void) +{ + RCC->CTLR |= (uint32_t)0x00000001; + RCC->CFGR0 &= (uint32_t)0xF8FF0000; + RCC->CTLR &= (uint32_t)0xFEF6FFFF; + RCC->CTLR &= (uint32_t)0xFFFBFFFF; + RCC->CFGR0 &= (uint32_t)0xFF80FFFF; + RCC->INTR = 0x009F0000; + SetSysClock(); +} + +/********************************************************************* + * @fn SystemCoreClockUpdate + * + * @brief Update SystemCoreClock variable according to Clock Register Values. + * + * @return none + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0; + + tmp = RCC->CFGR0 & RCC_SWS; + + switch (tmp) + { + case 0x00: + SystemCoreClock = HSI_VALUE; + break; + case 0x04: + SystemCoreClock = HSE_VALUE; + break; + case 0x08: + pllmull = RCC->CFGR0 & RCC_PLLMULL; + pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if(pllmull == 17) pllmull = 18; + + if (pllsource == 0x00) + { + if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE){ + SystemCoreClock = HSI_VALUE * pllmull; + } + else{ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + } + else + { +#if defined (CH32V20x_D8W) + if((RCC->CFGR0 & (3<<22)) == (3<<22)) + { + SystemCoreClock = ((HSE_VALUE>>1)) * pllmull; + } + else +#endif + if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + SystemCoreClock = ((HSE_VALUE>>2) >> 1) * pllmull; +#else + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; +#endif + } + else + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + SystemCoreClock = (HSE_VALUE>>2) * pllmull; +#else + SystemCoreClock = HSE_VALUE * pllmull; +#endif + } + } + + if(Pll_6_5 == 1) SystemCoreClock = (SystemCoreClock / 2); + + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; + SystemCoreClock >>= tmp; +} + +/********************************************************************* + * @fn SetSysClock + * + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_48MHz_HSE + SetSysClockTo48_HSE(); +#elif defined SYSCLK_FREQ_56MHz_HSE + SetSysClockTo56_HSE(); +#elif defined SYSCLK_FREQ_72MHz_HSE + SetSysClockTo72_HSE(); +#elif defined SYSCLK_FREQ_96MHz_HSE + SetSysClockTo96_HSE(); +#elif defined SYSCLK_FREQ_120MHz_HSE + SetSysClockTo120_HSE(); +#elif defined SYSCLK_FREQ_144MHz_HSE + SetSysClockTo144_HSE(); +#elif defined SYSCLK_FREQ_48MHz_HSI + SetSysClockTo48_HSI(); +#elif defined SYSCLK_FREQ_56MHz_HSI + SetSysClockTo56_HSI(); +#elif defined SYSCLK_FREQ_72MHz_HSI + SetSysClockTo72_HSI(); +#elif defined SYSCLK_FREQ_96MHz_HSI + SetSysClockTo96_HSI(); +#elif defined SYSCLK_FREQ_120MHz_HSI + SetSysClockTo120_HSI(); +#elif defined SYSCLK_FREQ_144MHz_HSI + SetSysClockTo144_HSI(); + +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + * source (default after reset) + */ +} + +#ifdef SYSCLK_FREQ_HSE + +/********************************************************************* + * @fn SetSysClockToHSE + * + * @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; + + /* Select HSE as system clock source + * CH32V20x_D6 (HSE=8MHZ) + * CH32V20x_D8 (HSE=32MHZ) + * CH32V20x_D8W (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) + { + } + } + else + { + /* If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo48_HSE + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo56_HSE + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo72_HSE + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_96MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo96_HSE + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_120MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo120_HSE + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { +#if defined (CH32V20x_D8W) + RCC->CFGR0 |= (uint32_t)(3<<22); + /* HCLK = SYSCLK/2 */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV2; +#else + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; +#endif + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 15 = 120 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/2 * 15 = 240 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} +#elif defined SYSCLK_FREQ_144MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo144_HSE + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo48_HSI + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo56_HSI + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 7 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo72_HSI + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_96MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo96_HSI + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_120MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo120_HSI + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} +#elif defined SYSCLK_FREQ_144MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo144_HSI + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#endif diff --git a/hw/bsp/ch32v20x/system_ch32v20x.h b/hw/bsp/ch32v20x/system_ch32v20x.h new file mode 100644 index 000000000..eec7ccb15 --- /dev/null +++ b/hw/bsp/ch32v20x/system_ch32v20x.h @@ -0,0 +1,29 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v20x.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : CH32V20x Device Peripheral Access Layer System Header File. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __SYSTEM_ch32v20x_H +#define __SYSTEM_ch32v20x_H + +#ifdef __cplusplus + extern "C" { +#endif + +extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ + +/* System_Exported_Functions */ +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /*__CH32V20x_SYSTEM_H */ diff --git a/hw/bsp/ch32v20x/wch-riscv.cfg b/hw/bsp/ch32v20x/wch-riscv.cfg new file mode 100644 index 000000000..56a18d77e --- /dev/null +++ b/hw/bsp/ch32v20x/wch-riscv.cfg @@ -0,0 +1,18 @@ +#interface wlink +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 003b90539..7232bfa08 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -4,6 +4,9 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE ?= riscv-none-embed- +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +#CROSS_COMPILE ?= riscv-none-elf- + # Submodules CH32V307_SDK = hw/mcu/wch/ch32v307 @@ -13,6 +16,8 @@ CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# -march=rv32imac_zicsr + CFLAGS += \ -flto \ -msmall-data-limit=8 \ diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index d4b6eaea6..78f20d7db 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,6 +1,10 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE = riscv-none-embed- +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +# CROSS_COMPILE = riscv-none-elf- +# -march=rv32i_zicsr + CPU_CORE ?= rv32i-ilp32 CFLAGS += \ diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 28e48a6b5..646564eae 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -7,6 +7,9 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE ?= riscv-none-embed- +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +# CROSS_COMPILE ?= riscv-none-elf- + # Submodules NUCLEI_SDK = hw/mcu/gd/nuclei-sdk @@ -19,6 +22,8 @@ STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# -march=rv32imac_zicsr + CFLAGS += \ -mcmodel=medlow \ -mstrict-align \ diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 4218835aa..974289b69 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -609,7 +609,7 @@ static bool _negotiate_streaming_parameters(videod_streaming_interface_t const * tusb_desc_cs_video_fmt_t const *fmt = _find_desc_format(tu_desc_next(vs), end, fmtnum); tusb_desc_cs_video_frm_t const *frm = _find_desc_frame(tu_desc_next(fmt), end, frmnum); - uint_fast32_t interval, interval_ms; + uint_fast32_t interval, interval_ms = 0; switch (request) { case VIDEO_REQUEST_GET_MAX: { uint_fast32_t min_interval, max_interval; diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 3a7d6ad33..eab112015 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -410,6 +410,10 @@ #elif TU_CHECK_MCU(OPT_MCU_CH32F20X) #define TUP_DCD_ENDPOINT_MAX 16 #define TUP_RHPORT_HIGHSPEED 1 + +#elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + #define TUP_DCD_ENDPOINT_MAX 8 + #endif diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h new file mode 100644 index 000000000..3b8e49ae2 --- /dev/null +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -0,0 +1,77 @@ +#ifndef USB_CH32_USBFS_REG_H +#define USB_CH32_USBFS_REG_H + +#if (CFG_TUSB_MCU == OPT_MCU_CH32V20X) +#include +#endif + +// CTRL +#define USBFS_CTRL_DMA_EN (1 << 0) +#define USBFS_CTRL_CLR_ALL (1 << 1) +#define USBFS_CTRL_RESET_SIE (1 << 2) +#define USBFS_CTRL_INT_BUSY (1 << 3) +#define USBFS_CTRL_SYS_CTRL (1 << 4) +#define USBFS_CTRL_DEV_PUEN (1 << 5) +#define USBFS_CTRL_LOW_SPEED (1 << 6) +#define USBFS_CTRL_HOST_MODE (1 << 7) + +// INT_EN +#define USBFS_INT_EN_BUS_RST (1 << 0) +#define USBFS_INT_EN_DETECT (1 << 0) +#define USBFS_INT_EN_TRANSFER (1 << 1) +#define USBFS_INT_EN_SUSPEND (1 << 2) +#define USBFS_INT_EN_HST_SOF (1 << 3) +#define USBFS_INT_EN_FIFO_OV (1 << 4) +#define USBFS_INT_EN_DEV_NAK (1 << 6) +#define USBFS_INT_EN_DEV_SOF (1 << 7) + +// INT_FG +#define USBFS_INT_FG_BUS_RST (1 << 0) +#define USBFS_INT_FG_DETECT (1 << 0) +#define USBFS_INT_FG_TRANSFER (1 << 1) +#define USBFS_INT_FG_SUSPEND (1 << 2) +#define USBFS_INT_FG_HST_SOF (1 << 3) +#define USBFS_INT_FG_FIFO_OV (1 << 4) +#define USBFS_INT_FG_SIE_FREE (1 << 5) +#define USBFS_INT_FG_TOG_OK (1 << 6) +#define USBFS_INT_FG_IS_NAK (1 << 7) + +// INT_ST +#define USBFS_INT_ST_MASK_UIS_ENDP(x) (((x) >> 0) & 0x0F) +#define USBFS_INT_ST_MASK_UIS_TOKEN(x) (((x) >> 4) & 0x03) + +// UDEV_CTRL +#define USBFS_UDEV_CTRL_PORT_EN (1 << 0) +#define USBFS_UDEV_CTRL_GP_BIT (1 << 1) +#define USBFS_UDEV_CTRL_LOW_SPEED (1 << 2) +#define USBFS_UDEV_CTRL_DM_PIN (1 << 4) +#define USBFS_UDEV_CTRL_DP_PIN (1 << 5) +#define USBFS_UDEV_CTRL_PD_DIS (1 << 7) + +// TX_CTRL +#define USBFS_EP_T_RES_MASK (3 << 0) +#define USBFS_EP_T_TOG (1 << 2) +#define USBFS_EP_T_AUTO_TOG (1 << 3) + +#define USBFS_EP_T_RES_ACK (0 << 0) +#define USBFS_EP_T_RES_NYET (1 << 0) +#define USBFS_EP_T_RES_NAK (2 << 0) +#define USBFS_EP_T_RES_STALL (3 << 0) + +// RX_CTRL +#define USBFS_EP_R_RES_MASK (3 << 0) +#define USBFS_EP_R_TOG (1 << 2) +#define USBFS_EP_R_AUTO_TOG (1 << 3) + +#define USBFS_EP_R_RES_ACK (0 << 0) +#define USBFS_EP_R_RES_NYET (1 << 0) +#define USBFS_EP_R_RES_NAK (2 << 0) +#define USBFS_EP_R_RES_STALL (3 << 0) + +// token PID +#define PID_OUT 0 +#define PID_SOF 1 +#define PID_IN 2 +#define PID_SETUP 3 + +#endif // USB_CH32_USBFS_REG_H diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c new file mode 100644 index 000000000..256c46696 --- /dev/null +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -0,0 +1,304 @@ +#include "tusb_option.h" + +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X) + +#include +#include "device/dcd.h" +#include "ch32_usbfs_reg.h" + +/* private defines */ +#define EP_MAX (8) + +#define EP_DMA(ep) ((&USBOTG_FS->UEP0_DMA)[ep]) +#define EP_TX_LEN(ep) ((&USBOTG_FS->UEP0_TX_LEN)[2 * ep]) +#define EP_TX_CTRL(ep) ((&USBOTG_FS->UEP0_TX_CTRL)[4 * ep]) +#define EP_RX_CTRL(ep) ((&USBOTG_FS->UEP0_RX_CTRL)[4 * ep]) + +/* private data */ +struct usb_xfer { + bool valid; + uint8_t *buffer; + size_t len; + size_t processed_len; + size_t max_size; +}; + +static struct { + bool ep0_tog; + bool isochronous[EP_MAX]; + struct usb_xfer xfer[EP_MAX][2]; + TU_ATTR_ALIGNED(4) uint8_t buffer[EP_MAX][2][64]; + TU_ATTR_ALIGNED(4) struct { + // OUT transfers >64 bytes will overwrite queued IN data! + uint8_t out[64]; + uint8_t in[1023]; + uint8_t pad; + } ep3_buffer; +} data; + +/* private helpers */ +static void update_in(uint8_t rhport, uint8_t ep, bool force) { + struct usb_xfer *xfer = &data.xfer[ep][TUSB_DIR_IN]; + if (xfer->valid) { + if (force || xfer->len) { + size_t len = TU_MIN(xfer->max_size, xfer->len); + if (ep == 0) { + memcpy(data.buffer[ep][TUSB_DIR_OUT], xfer->buffer, len); // ep0 uses same chunk + } else if (ep == 3) { + memcpy(data.ep3_buffer.in, xfer->buffer, len); + } else { + memcpy(data.buffer[ep][TUSB_DIR_IN], xfer->buffer, len); + } + xfer->buffer += len; + xfer->len -= len; + xfer->processed_len += len; + + EP_TX_LEN(ep) = len; + if (ep == 0) { + EP_TX_CTRL(0) = USBFS_EP_T_RES_ACK | (data.ep0_tog ? USBFS_EP_T_TOG : 0); + data.ep0_tog = !data.ep0_tog; + } else if (data.isochronous[ep]) { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NYET; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_ACK; + } + } else { + xfer->valid = false; + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NAK; + dcd_event_xfer_complete(rhport, ep | TUSB_DIR_IN_MASK, xfer->processed_len, + XFER_RESULT_SUCCESS, true); + } + } +} + +static void update_out(uint8_t rhport, uint8_t ep, size_t rx_len) { + struct usb_xfer *xfer = &data.xfer[ep][TUSB_DIR_OUT]; + if (xfer->valid) { + size_t len = TU_MIN(xfer->max_size, TU_MIN(xfer->len, rx_len)); + if (ep == 3) { + memcpy(xfer->buffer, data.ep3_buffer.out, len); + } else { + memcpy(xfer->buffer, data.buffer[ep][TUSB_DIR_OUT], len); + } + xfer->buffer += len; + xfer->len -= len; + xfer->processed_len += len; + + if (xfer->len == 0 || len < xfer->max_size) { + xfer->valid = false; + dcd_event_xfer_complete(rhport, ep, xfer->processed_len, XFER_RESULT_SUCCESS, true); + } + + if (ep == 0) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + } + } +} + +/* public functions */ +void dcd_init(uint8_t rhport) { + // init registers + USBOTG_FS->BASE_CTRL = USBFS_CTRL_SYS_CTRL | USBFS_CTRL_INT_BUSY | USBFS_CTRL_DMA_EN; + USBOTG_FS->UDEV_CTRL = USBFS_UDEV_CTRL_PD_DIS | USBFS_UDEV_CTRL_PORT_EN; + USBOTG_FS->DEV_ADDR = 0x00; + + USBOTG_FS->INT_FG = 0xFF; + USBOTG_FS->INT_EN = USBFS_INT_EN_BUS_RST | USBFS_INT_EN_TRANSFER | USBFS_INT_EN_SUSPEND; + + // setup endpoint 0 + EP_DMA(0) = (uint32_t) &data.buffer[0][0]; + EP_TX_LEN(0) = 0; + EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + + // enable other endpoints but NAK everything + USBOTG_FS->UEP4_1_MOD = 0xCC; + USBOTG_FS->UEP2_3_MOD = 0xCC; + USBOTG_FS->UEP5_6_MOD = 0xCC; + USBOTG_FS->UEP7_MOD = 0x0C; + + for (uint8_t ep = 1; ep < EP_MAX; ep++) { + EP_DMA(ep) = (uint32_t) &data.buffer[ep][0]; + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NAK; + } + EP_DMA(3) = (uint32_t) &data.ep3_buffer.out[0]; + + dcd_connect(rhport); +} + +void dcd_int_handler(uint8_t rhport) { + (void) rhport; + uint8_t status = USBOTG_FS->INT_FG; + if (status & USBFS_INT_FG_TRANSFER) { + uint8_t ep = USBFS_INT_ST_MASK_UIS_ENDP(USBOTG_FS->INT_ST); + uint8_t token = USBFS_INT_ST_MASK_UIS_TOKEN(USBOTG_FS->INT_ST); + + switch (token) { + case PID_OUT: { + uint16_t rx_len = USBOTG_FS->RX_LEN; + update_out(rhport, ep, rx_len); + break; + } + + case PID_IN: + update_in(rhport, ep, false); + break; + + case PID_SETUP: + data.ep0_tog = true; + dcd_event_setup_received(rhport, &data.buffer[0][TUSB_DIR_OUT][0], true); + break; + } + + USBOTG_FS->INT_FG = USBFS_INT_FG_TRANSFER; + } else if (status & USBFS_INT_FG_BUS_RST) { + data.ep0_tog = true; + data.xfer[0][TUSB_DIR_OUT].max_size = 64; + data.xfer[0][TUSB_DIR_IN].max_size = 64; + + dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true); + + USBOTG_FS->DEV_ADDR = 0x00; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + + USBOTG_FS->INT_FG = USBFS_INT_FG_BUS_RST; + } else if (status & USBFS_INT_FG_SUSPEND) { + dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SUSPEND }; + dcd_event_handler(&event, true); + USBOTG_FS->INT_FG = USBFS_INT_FG_SUSPEND; + } +} + +void dcd_int_enable(uint8_t rhport) { + (void) rhport; + NVIC_EnableIRQ(USBHD_IRQn); +} + +void dcd_int_disable(uint8_t rhport) { + (void) rhport; + NVIC_DisableIRQ(USBHD_IRQn); +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + (void) dev_addr; + dcd_edpt_xfer(rhport, 0x80, NULL, 0); // zlp status response +} + +void dcd_remote_wakeup(uint8_t rhport) { + (void) rhport; + // TODO optional +} + +void dcd_connect(uint8_t rhport) { + (void) rhport; + USBOTG_FS->BASE_CTRL |= USBFS_CTRL_DEV_PUEN; +} + +void dcd_disconnect(uint8_t rhport) { + (void) rhport; + USBOTG_FS->BASE_CTRL &= ~USBFS_CTRL_DEV_PUEN; +} + +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { + (void) rhport; + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && + request->bRequest == TUSB_REQ_SET_ADDRESS) { + USBOTG_FS->DEV_ADDR = (uint8_t) request->wValue; + } + EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; +} + +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { + (void) rhport; + uint8_t ep = tu_edpt_number(desc_ep->bEndpointAddress); + uint8_t dir = tu_edpt_dir(desc_ep->bEndpointAddress); + TU_ASSERT(ep < EP_MAX); + + data.isochronous[ep] = desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS; + data.xfer[ep][dir].max_size = tu_edpt_packet_size(desc_ep); + + if (ep != 0) { + if (dir == TUSB_DIR_OUT) { + if (data.isochronous[ep]) { + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NYET; + } else { + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_ACK; + } + } else { + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; + } + } + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) { + (void) rhport; + // TODO optional +} + +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { + (void) rhport; + (void) ep_addr; + // TODO optional +} + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + + struct usb_xfer *xfer = &data.xfer[ep][dir]; + xfer->valid = true; + xfer->buffer = buffer; + xfer->len = total_bytes; + xfer->processed_len = 0; + + if (dir == TUSB_DIR_IN) { + update_in(rhport, ep, true); + } + return true; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + if (ep == 0) { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_STALL; + } else { + EP_TX_LEN(0) = 0; + EP_TX_CTRL(0) = USBFS_EP_T_RES_STALL; + } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~USBFS_EP_R_RES_MASK) | USBFS_EP_R_RES_STALL; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~USBFS_EP_T_RES_MASK) | USBFS_EP_T_RES_STALL; + } + } +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + if (ep == 0) { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~(USBFS_EP_R_RES_MASK | USBFS_EP_R_TOG)) | USBFS_EP_R_RES_ACK; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK | USBFS_EP_T_TOG)) | USBFS_EP_T_RES_NAK; + } + } +} + +#endif // CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X) diff --git a/src/tusb_option.h b/src/tusb_option.h index 058427e0e..3d04825a4 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -181,6 +181,7 @@ // WCH #define OPT_MCU_CH32V307 2200 ///< WCH CH32V307 #define OPT_MCU_CH32F20X 2210 ///< WCH CH32F20x +#define OPT_MCU_CH32V20X 2220 ///< WCH CH32V20X // NXP LPC MCX diff --git a/tools/get_deps.py b/tools/get_deps.py index 87c1c5ccd..cf15126b3 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -168,6 +168,9 @@ deps_optional = { 'hw/mcu/ti': ['https://github.com/hathach/ti_driver.git', '143ed6cc20a7615d042b03b21e070197d473e6e5', 'msp430 msp432e4 tm4c'], + 'hw/mcu/wch/ch32v20x': ['https://github.com/openwch/ch32v20x.git', + 'de6d68c654340d7f27b00cebbfc9aa2740a1abc2', + 'ch32v20x'], 'hw/mcu/wch/ch32v307': ['https://github.com/openwch/ch32v307.git', '17761f5cf9dbbf2dcf665b7c04934188add20082', 'ch32v307'], diff --git a/tools/iar_template.ipcf b/tools/iar_template.ipcf index e72ec0ce2..33a6ef045 100644 --- a/tools/iar_template.ipcf +++ b/tools/iar_template.ipcf @@ -239,6 +239,7 @@ $TUSB_DIR$/src/portable/valentyusb/eptri/dcd_eptri.h + $TUSB_DIR$/src/portable/wch/dcd_ch32_usbfs.c $TUSB_DIR$/src/portable/wch/dcd_ch32_usbhs.c $TUSB_DIR$/src/portable/wch/ch32_usbhs_reg.h -- cgit v1.3.1 From d3098747c03fe7f5d5d8b9a45ed4e7134fcaaf9d Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Thu, 16 May 2024 11:17:05 -0700 Subject: Add esp32c2 and esp32h2 for max3421 support --- src/common/tusb_mcu.h | 2 +- src/tusb_option.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'src/common') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 5a567f2d5..f4325e0d8 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -329,7 +329,7 @@ #define TUP_USBIP_DWC2 #define TUP_DCD_ENDPOINT_MAX 6 -#elif TU_CHECK_MCU(OPT_MCU_ESP32) && (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) +#elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU_ESP32C6, OPT_MCU_ESP32H2) && (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" //--------------------------------------------------------------------+ diff --git a/src/tusb_option.h b/src/tusb_option.h index 3ead20ee7..3a5b1e961 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -122,6 +122,8 @@ #define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) #define OPT_MCU_ESP32C3 903 ///< Espressif ESP32-C3 #define OPT_MCU_ESP32C6 904 ///< Espressif ESP32-C6 +#define OPT_MCU_ESP32C2 905 ///< Espressif ESP32-C2 +#define OPT_MCU_ESP32H2 906 ///< Espressif ESP32-H2 #define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog -- cgit v1.3.1 From 5fee292606e4c5502b2172328c02d5df24eb0c7c Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 17 May 2024 16:13:59 +0700 Subject: temp code --- hw/bsp/ch32v307/family.c | 25 +++++++++++++++++++++++++ hw/bsp/ch32v307/family.cmake | 23 ++++++++++++++--------- src/common/tusb_mcu.h | 4 ++-- src/portable/wch/ch32_usbfs_reg.h | 9 ++++++++- src/portable/wch/dcd_ch32_usbfs.c | 2 +- 5 files changed, 50 insertions(+), 13 deletions(-) (limited to 'src/common') diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 245fa5674..50e48e7df 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -46,6 +46,18 @@ __attribute__ ((used)) void USBHS_IRQHandler_impl (void) tud_int_handler(0); } + +void OTG_FS_IRQHandler (void) __attribute__((naked)); +void OTG_FS_IRQHandler (void) +{ + __asm volatile ("call OTG_FS_IRQHandler_impl; mret"); +} + +__attribute__ ((used)) void OTG_FS_IRQHandler_impl (void) +{ + tud_int_handler(0); +} + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ @@ -72,6 +84,7 @@ void board_init(void) { usart_printf_init(115200); + #if 0 RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); RCC_USBHSConfig(RCC_USBPLL_Div2); @@ -79,6 +92,18 @@ void board_init(void) { RCC_USBHSPHYPLLALIVEcmd(ENABLE); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); + #else + uint8_t otg_div; + switch (SystemCoreClock) { + case 48000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div1; break; + case 96000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div2; break; + case 144000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div3; break; + default: TU_ASSERT(0,); break; + } + RCC_OTGFSCLKConfig(otg_div); + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); + #endif + GPIO_InitTypeDef GPIO_InitStructure = {0}; // LED diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index fb478d387..8a4bd7730 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -1,5 +1,6 @@ include_guard() +set(CH32_FAMILY ch32v30x) set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307/EVT/EXAM/SRC) # include board specific @@ -12,6 +13,8 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") +# Port0 Fullspeed, Port1 Highspeed + #------------------------------------ # BOARD_TARGET #------------------------------------ @@ -27,18 +30,18 @@ function(add_board_target BOARD_TARGET) set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_ch32v30x_D8C.S) + set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Core/core_riscv.c - ${SDK_DIR}/Peripheral/src/ch32v30x_gpio.c - ${SDK_DIR}/Peripheral/src/ch32v30x_misc.c - ${SDK_DIR}/Peripheral/src/ch32v30x_rcc.c - ${SDK_DIR}/Peripheral/src/ch32v30x_usart.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch32v30x_it.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_ch32v30x.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${CH32_FAMILY}_it.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -46,7 +49,8 @@ function(add_board_target BOARD_TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + #BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) update_board(${BOARD_TARGET}) @@ -100,7 +104,8 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/wch/dcd_ch32_usbhs.c + #${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index eab112015..e313fea05 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -404,8 +404,8 @@ //------------- WCH -------------// #elif TU_CHECK_MCU(OPT_MCU_CH32V307) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 +// #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_CH32F20X) #define TUP_DCD_ENDPOINT_MAX 16 diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h index 3b8e49ae2..d5341f3a8 100644 --- a/src/portable/wch/ch32_usbfs_reg.h +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -1,8 +1,15 @@ #ifndef USB_CH32_USBFS_REG_H #define USB_CH32_USBFS_REG_H -#if (CFG_TUSB_MCU == OPT_MCU_CH32V20X) +#if (CFG_TUSB_MCU == OPT_MCU_CH32V307) +#include +#define USBHD_IRQn OTG_FS_IRQn + +#elif (CFG_TUSB_MCU == OPT_MCU_CH32V20X) #include + +#elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) +#include #endif // CTRL diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 3af3ff6d7..3e4b6cae5 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -1,6 +1,6 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X) +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X || CFG_TUSB_MCU == OPT_MCU_CH32V307) #include #include "device/dcd.h" -- cgit v1.3.1 From b19295c1c15de676e7cebd5bd5b6aa53887c6a56 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 May 2024 17:26:04 +0700 Subject: use correct wch usbhs, usbfs for ch32v307 using CFG_TUD_MAX_SPEED --- examples/build_system/make/rules.mk | 11 ++++++ hw/bsp/ch32v20x/family.mk | 10 +---- hw/bsp/ch32v307/family.c | 77 ++++++++++++------------------------- hw/bsp/ch32v307/family.cmake | 27 +++++++------ hw/bsp/ch32v307/family.mk | 61 +++++++++++++---------------- src/common/tusb_mcu.h | 16 ++++++-- src/portable/wch/ch32_usbhs_reg.h | 4 +- src/portable/wch/dcd_ch32_usbfs.c | 3 +- src/portable/wch/dcd_ch32_usbhs.c | 6 +-- 9 files changed, 98 insertions(+), 117 deletions(-) (limited to 'src/common') diff --git a/examples/build_system/make/rules.mk b/examples/build_system/make/rules.mk index 7b6b339ed..102c6db0c 100644 --- a/examples/build_system/make/rules.mk +++ b/examples/build_system/make/rules.mk @@ -134,6 +134,17 @@ OPENOCD_OPTION ?= flash-openocd: $(BUILD)/$(PROJECT).elf openocd $(OPENOCD_OPTION) -c "program $< verify reset exit" +# --------------- openocd-wch ----------------- +# wch-linke is not supported yet in official openOCD yet. We need to either use +# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or +# 2. compiled from https://github.com/hathach/riscv-openocd-wch or +# https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +# with ./configure --disable-werror --enable-wlinke --enable-ch347=no +OPENOCD_WCH ?= /home/${USER}/app/riscv-openocd-wch/src/openocd +OPENOCD_WCH_OPTION ?= +flash-openocd-wch: $(BUILD)/$(PROJECT).elf + $(OPENOCD_WCH) $(OPENOCD_WCH_OPTION) -c init -c halt -c "flash write_image $<" -c reset -c exit + # --------------- dfu-util ----------------- DFU_UTIL_OPTION ?= -a 0 flash-dfu-util: $(BUILD)/$(PROJECT).bin diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 6b09fdac7..5c8b31a1c 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -16,8 +16,6 @@ CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ -mcmodel=medany \ - -ffunction-sections \ - -fdata-sections \ -ffat-lto-objects \ -flto \ -DCH32V20x_${MCU_VARIANT} \ @@ -46,9 +44,5 @@ INC += \ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V -# wch-link is not supported yet in official openOCD yet. We need to either use -# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or -# 2. compiled from modified source https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz -OPENOCD ?= $(HOME)/app/riscv-openocd-wch/src/openocd -flash: $(BUILD)/$(PROJECT).elf - $(OPENOCD) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 50e48e7df..fe37ea8e3 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -35,41 +35,31 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USBHS_IRQHandler (void) __attribute__((naked)); -void USBHS_IRQHandler (void) -{ - __asm volatile ("call USBHS_IRQHandler_impl; mret"); -} +// TODO maybe having FS as port0, HS as port1 -__attribute__ ((used)) void USBHS_IRQHandler_impl (void) -{ +__attribute__((interrupt)) void USBHS_IRQHandler(void) { + #if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED tud_int_handler(0); + #endif } - -void OTG_FS_IRQHandler (void) __attribute__((naked)); -void OTG_FS_IRQHandler (void) -{ - __asm volatile ("call OTG_FS_IRQHandler_impl; mret"); -} - -__attribute__ ((used)) void OTG_FS_IRQHandler_impl (void) -{ +__attribute__((interrupt)) void OTG_FS_IRQHandler(void) { + #if CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED tud_int_handler(0); + #endif } //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -uint32_t SysTick_Config(uint32_t ticks) -{ +uint32_t SysTick_Config(uint32_t ticks) { NVIC_EnableIRQ(SysTicK_IRQn); - SysTick->CTLR=0; - SysTick->SR=0; - SysTick->CNT=0; - SysTick->CMP=ticks-1; - SysTick->CTLR=0xF; + SysTick->CTLR = 0; + SysTick->SR = 0; + SysTick->CNT = 0; + SysTick->CMP = ticks - 1; + SysTick->CTLR = 0xF; return 0; } @@ -82,17 +72,17 @@ void board_init(void) { SysTick_Config(SystemCoreClock / 1000); #endif - usart_printf_init(115200); + usart_printf_init(115200); - #if 0 +#if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED + // Use Highspeed USB RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); RCC_USBHSConfig(RCC_USBPLL_Div2); RCC_USBHSPLLCKREFCLKConfig(RCC_USBHSPLLCKREFCLK_4M); RCC_USBHSPHYPLLALIVEcmd(ENABLE); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); - - #else +#else uint8_t otg_div; switch (SystemCoreClock) { case 48000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div1; break; @@ -102,7 +92,7 @@ void board_init(void) { } RCC_OTGFSCLKConfig(otg_div); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); - #endif +#endif GPIO_InitTypeDef GPIO_InitStructure = {0}; @@ -127,24 +117,14 @@ void board_init(void) { } #if CFG_TUSB_OS == OPT_OS_NONE - volatile uint32_t system_ticks = 0; -/* Small workaround to support HW stack save/restore */ -void SysTick_Handler (void) __attribute__((naked)); -void SysTick_Handler (void) -{ - __asm volatile ("call SysTick_Handler_impl; mret"); -} - -__attribute__((used)) void SysTick_Handler_impl (void) -{ +__attribute__((interrupt)) void SysTick_Handler(void) { SysTick->SR = 0; system_ticks++; } -uint32_t board_millis (void) -{ +uint32_t board_millis(void) { return system_ticks; } @@ -154,36 +134,29 @@ uint32_t board_millis (void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write (bool state) -{ +void board_led_write(bool state) { GPIO_WriteBit(LED_PORT, LED_PIN, state); } -uint32_t board_button_read (void) -{ +uint32_t board_button_read(void) { return BUTTON_STATE_ACTIVE == GPIO_ReadInputDataBit(BUTTON_PORT, BUTTON_PIN); } -int board_uart_read (uint8_t *buf, int len) -{ +int board_uart_read(uint8_t* buf, int len) { (void) buf; (void) len; return 0; } -int board_uart_write (void const *buf, int len) -{ +int board_uart_write(void const* buf, int len) { int txsize = len; - while ( txsize-- ) - { + while (txsize--) { uart_write(*(uint8_t const*) buf); buf++; } return len; } - - #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index 8a4bd7730..fd475c987 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -1,7 +1,8 @@ include_guard() set(CH32_FAMILY ch32v30x) -set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307/EVT/EXAM/SRC) +set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307) +set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -13,7 +14,10 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") -# Port0 Fullspeed, Port1 Highspeed +# default to highspeed +if (NOT DEFINED SPEED) + set(SPEED high) +endif() #------------------------------------ # BOARD_TARGET @@ -30,27 +34,26 @@ function(add_board_target BOARD_TARGET) set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) + set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/Core/core_riscv.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${SDK_SRC_DIR}/Core/core_riscv.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${CH32_FAMILY}_it.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/Peripheral/inc + ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) target_compile_definitions(${BOARD_TARGET} PUBLIC - #BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + BOARD_TUD_MAX_SPEED=$,OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> ) update_board(${BOARD_TARGET}) @@ -104,7 +107,7 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC - #${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ${TOP}/src/portable/wch/dcd_ch32_usbhs.c ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index df9ded4a0..2dbe0c46a 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -7,63 +7,54 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack CROSS_COMPILE ?= riscv-none-elf- -# Submodules -CH32V307_SDK = hw/mcu/wch/ch32v307 - -# WCH-SDK paths -CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC +CH32_FAMILY = ch32v30x +SDK_DIR = hw/mcu/wch/ch32v307 +SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# default to use high speed port, unless specified in board.mk or command line +SPEED ?= high + CFLAGS += \ -flto \ -msmall-data-limit=8 \ - -mno-save-restore -Os \ + -mno-save-restore \ -fmessage-length=0 \ -fsigned-char \ - -ffunction-sections \ - -fdata-sections \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ - -Xlinker --gc-sections \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + +ifeq ($(SPEED),high) + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using USBHS driver for HighSpeed mode") +else + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + $(info "Using USBFS driver for FullSpeed mode") +endif LDFLAGS_GCC += \ -nostdlib -nostartfiles \ - --specs=nosys.specs --specs=nano.specs + --specs=nosys.specs --specs=nano.specs \ SRC_C += \ src/portable/wch/dcd_ch32_usbhs.c \ - $(CH32V307_SDK_SRC)/Core/core_riscv.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_gpio.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_misc.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_rcc.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_usart.c + src/portable/wch/dcd_ch32_usbfs.c \ + $(SDK_SRC_DIR)/Core/core_riscv.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_rcc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_usart.c SRC_S += \ - $(CH32V307_SDK_SRC)/Startup/startup_ch32v30x_D8C.S + $(SDK_SRC_DIR)/Startup/startup_${CH32_FAMILY}_D8C.S INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(CH32V307_SDK_SRC)/Peripheral/inc + $(TOP)/$(SDK_SRC_DIR)/Peripheral/inc # For freeRTOS port source FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V -# wch-link is not supported yet in official openOCD yet. We need to either use -# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or -# 2. compiled from modified source https://github.com/kprasadvnsi/riscv-openocd-wch -# -# Note: For Linux, somehow openocd in mounriver studio does not seem to have wch-link enable, -# therefore we need to compile it from source as follows: -# git clone https://github.com/kprasadvnsi/riscv-openocd-wch -# cd riscv-openocd-wch -# ./bootstrap -# ./configure CFLAGS="-Wno-error" --enable-wlink -# make -# openocd binaries will be generated in riscv-openocd-wch/src - -# flash target ROM bootloader -OPENOCD_WCH = /home/${USER}/app/riscv-openocd-wch/src/openocd -flash: $(BUILD)/$(PROJECT).elf - $(OPENOCD_WCH) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "program $<" -c wlink_reset_resume -c exit +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index e313fea05..d928e44e8 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -404,14 +404,22 @@ //------------- WCH -------------// #elif TU_CHECK_MCU(OPT_MCU_CH32V307) - #define TUP_DCD_ENDPOINT_MAX 8 -// #define TUP_RHPORT_HIGHSPEED 1 + // v307 support both FS and HS + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32F20X) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + #define TUP_USBIP_WCH_USBFS #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index 9b956231f..6ae91ec71 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -2,9 +2,9 @@ #define _USB_CH32_USBHS_REG_H #if (CFG_TUSB_MCU == OPT_MCU_CH32V307) -#include + #include #elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) -#include + #include #endif /******************* GLOBAL ******************/ diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 3e4b6cae5..413fe92c9 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -1,6 +1,7 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X || CFG_TUSB_MCU == OPT_MCU_CH32V307) +// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is full speed +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && (CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED) #include #include "device/dcd.h" diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 68e2179e9..9a12fc97f 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -26,11 +26,11 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && ((CFG_TUSB_MCU == OPT_MCU_CH32V307) || (CFG_TUSB_MCU == OPT_MCU_CH32F20X)) -#include "device/dcd.h" - +// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is high speed +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED) #include "ch32_usbhs_reg.h" +#include "device/dcd.h" // Max number of bi-directional endpoints including EP0 #define EP_MAX 16 -- cgit v1.3.1 From 927015baae9b2d265d1daaa0fc2ffca1aa4f9e91 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 May 2024 11:38:44 +0700 Subject: wch usbfs/usbhs need to specify which driver to use. for v307 default to highspeed --- hw/bsp/ch32v307/family.c | 13 +++++---- hw/bsp/ch32v307/family.cmake | 15 +++++++--- hw/bsp/ch32v307/family.mk | 4 +-- src/common/tusb_mcu.h | 50 ++++++++++++++++++++++++++-------- src/device/usbd.c | 2 +- src/portable/synopsys/dwc2/dwc2_type.h | 33 ++++++++++++++++------ src/portable/wch/dcd_ch32_usbfs.c | 3 +- src/portable/wch/dcd_ch32_usbhs.c | 3 +- src/tusb_option.h | 47 ++++++++++++++++++-------------- 9 files changed, 114 insertions(+), 56 deletions(-) (limited to 'src/common') diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 94578b416..0846b10a9 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -38,13 +38,13 @@ // TODO maybe having FS as port0, HS as port1 __attribute__((interrupt)) void USBHS_IRQHandler(void) { - #if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED + #if CFG_TUD_WCH_USBIP_USBHS tud_int_handler(0); #endif } __attribute__((interrupt)) void OTG_FS_IRQHandler(void) { - #if CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED + #if CFG_TUD_WCH_USBIP_USBFS tud_int_handler(0); #endif } @@ -74,15 +74,17 @@ void board_init(void) { usart_printf_init(CFG_BOARD_UART_BAUDRATE); -#if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED - // Use Highspeed USB +#ifdef CH32V30x_D8C + // v305/v307: Highspeed USB RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); RCC_USBHSConfig(RCC_USBPLL_Div2); RCC_USBHSPLLCKREFCLKConfig(RCC_USBHSPLLCKREFCLK_4M); RCC_USBHSPHYPLLALIVEcmd(ENABLE); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); -#else +#endif + + // Fullspeed USB uint8_t otg_div; switch (SystemCoreClock) { case 48000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div1; break; @@ -92,7 +94,6 @@ void board_init(void) { } RCC_OTGFSCLKConfig(otg_div); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); -#endif GPIO_InitTypeDef GPIO_InitStructure = {0}; diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index fd475c987..af26bfc31 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -14,7 +14,7 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") -# default to highspeed +# default to highspeed, used to select USBFS / USBHS driver if (NOT DEFINED SPEED) set(SPEED high) endif() @@ -52,9 +52,16 @@ function(add_board_target BOARD_TARGET) ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=$,OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> - ) + if (SPEED STREQUAL high) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_USBHS=1 +# BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + else () + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_USBFS=1 + ) + endif () update_board(${BOARD_TARGET}) diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 2dbe0c46a..30a070a9b 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -26,11 +26,11 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ ifeq ($(SPEED),high) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED $(info "Using USBHS driver for HighSpeed mode") + CFLAGS += -DCFG_TUD_WCH_USBIP_USBHS=1 else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED $(info "Using USBFS driver for FullSpeed mode") + CFLAGS += -DCFG_TUD_WCH_USBIP_USBFS=1 endif LDFLAGS_GCC += \ diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index abfed2835..af11ecb9b 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -402,28 +402,56 @@ #elif TU_CHECK_MCU(OPT_MCU_F1C100S) #define TUP_DCD_ENDPOINT_MAX 4 -//------------- WCH -------------// -#elif TU_CHECK_MCU(OPT_MCU_CH32V307) - // v307 support both FS and HS +//--------------------------------------------------------------------+ +// WCH +//--------------------------------------------------------------------+ +#elif TU_CHECK_MCU(OPT_MCU_CH32F20X) #define TUP_USBIP_WCH_USBHS #define TUP_USBIP_WCH_USBFS - #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif -#elif TU_CHECK_MCU(OPT_MCU_CH32F20X) - #define TUP_USBIP_WCH_USBHS - #define TUP_USBIP_WCH_USBFS + #if !defined(CFG_TUD_WCH_USBIP_USBHS) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif - #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + // v20x support both FSDEV (USBD) and USBFS, default to FSDEV #define TUP_USBIP_WCH_USBFS #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_CH32 -#endif + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif + #if !defined(CFG_TUD_WCH_FSDEV) + #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif + +#elif TU_CHECK_MCU(OPT_MCU_CH32V307) + // v307 support both FS and HS, default to HS + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif + + #if !defined(CFG_TUD_WCH_USBIP_USBHS) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif + + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + +#endif //--------------------------------------------------------------------+ // External USB controller diff --git a/src/device/usbd.c b/src/device/usbd.c index 25d890dc7..9a6afd0d1 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -407,7 +407,7 @@ bool tud_init(uint8_t rhport) { // skip if already initialized if (tud_inited()) return true; - TU_LOG_USBD("USBD init on controller %u\r\n", rhport); + TU_LOG_USBD("USBD init on controller %u, Highspeed = %u\r\n", rhport, TUD_OPT_HIGH_SPEED); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(dcd_event_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t)); diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index c15771237..cb694b326 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -1,17 +1,34 @@ -/** - * @author MCD Application Team - * Ha Thach (tinyusb.org) - * - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ +/**

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause - * */ #ifndef _TUSB_DWC2_TYPES_H_ diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index dafe4414e..9ed370b40 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -27,8 +27,7 @@ #include "tusb_option.h" -// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is full speed -#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && (CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && CFG_TUD_WCH_USBIP_USBFS #include "device/dcd.h" #include "ch32_usbfs_reg.h" diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index b36c7dd50..622f9c508 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -27,8 +27,7 @@ #include "tusb_option.h" -// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is high speed -#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && CFG_TUD_WCH_USBIP_USBHS #include "ch32_usbhs_reg.h" #include "device/dcd.h" diff --git a/src/tusb_option.h b/src/tusb_option.h index 318a4c7bd..d74510b60 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -207,19 +207,9 @@ #define OPT_OS_RTTHREAD 6 ///< RT-Thread #define OPT_OS_RTX4 7 ///< Keil RTX 4 -// Allow to use command line to change the config name/location -#ifdef CFG_TUSB_CONFIG_FILE - #include CFG_TUSB_CONFIG_FILE -#else - #include "tusb_config.h" -#endif - -#include "common/tusb_mcu.h" - -//-------------------------------------------------------------------- -// RootHub Mode Configuration -// CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port -//-------------------------------------------------------------------- +//--------------------------------------------------------------------+ +// Mode and Speed +//--------------------------------------------------------------------+ // Low byte is operational mode #define OPT_MODE_NONE 0x0000 ///< Disabled @@ -233,7 +223,24 @@ #define OPT_MODE_HIGH_SPEED 0x0400 ///< High Speed #define OPT_MODE_SPEED_MASK 0xff00 -//------------- Roothub as Device -------------// +//--------------------------------------------------------------------+ +// Include tusb_config.h and tusb_mcu.h +//--------------------------------------------------------------------+ + +// Allow to use command line to change the config name/location +#ifdef CFG_TUSB_CONFIG_FILE + #include CFG_TUSB_CONFIG_FILE +#else + #include "tusb_config.h" +#endif + +#include "common/tusb_mcu.h" + +//-------------------------------------------------------------------- +// RootHub Mode detection +//-------------------------------------------------------------------- + +//------------- Root hub as Device -------------// #if defined(CFG_TUSB_RHPORT0_MODE) && ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) #define TUD_RHPORT_MODE (CFG_TUSB_RHPORT0_MODE) @@ -261,7 +268,7 @@ // highspeed support indicator #define TUD_OPT_HIGH_SPEED (CFG_TUD_MAX_SPEED ? (CFG_TUD_MAX_SPEED & OPT_MODE_HIGH_SPEED) : TUP_RHPORT_HIGHSPEED) -//------------- Roothub as Host -------------// +//------------- Root hub as Host -------------// #if defined(CFG_TUSB_RHPORT0_MODE) && ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST) #define TUH_RHPORT_MODE (CFG_TUSB_RHPORT0_MODE) @@ -467,26 +474,26 @@ #define CFG_TUH_CDC 0 #endif +// FTDI is not part of CDC class, only to re-use CDC driver API #ifndef CFG_TUH_CDC_FTDI - // FTDI is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_FTDI 0 #endif +// List of product IDs that can use the FTDI CDC driver. 0x0403 is FTDI's VID #ifndef CFG_TUH_CDC_FTDI_VID_PID_LIST - // List of product IDs that can use the FTDI CDC driver. 0x0403 is FTDI's VID #define CFG_TUH_CDC_FTDI_VID_PID_LIST \ {0x0403, 0x6001}, {0x0403, 0x6006}, {0x0403, 0x6010}, {0x0403, 0x6011}, \ {0x0403, 0x6014}, {0x0403, 0x6015}, {0x0403, 0x8372}, {0x0403, 0xFBFA}, \ {0x0403, 0xCD18} #endif +// CP210X is not part of CDC class, only to re-use CDC driver API #ifndef CFG_TUH_CDC_CP210X - // CP210X is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CP210X 0 #endif +// List of product IDs that can use the CP210X CDC driver. 0x10C4 is Silicon Labs' VID #ifndef CFG_TUH_CDC_CP210X_VID_PID_LIST - // List of product IDs that can use the CP210X CDC driver. 0x10C4 is Silicon Labs' VID #define CFG_TUH_CDC_CP210X_VID_PID_LIST \ {0x10C4, 0xEA60}, {0x10C4, 0xEA70} #endif @@ -496,8 +503,8 @@ #define CFG_TUH_CDC_CH34X 0 #endif +// List of product IDs that can use the CH34X CDC driver #ifndef CFG_TUH_CDC_CH34X_VID_PID_LIST - // List of product IDs that can use the CH34X CDC driver #define CFG_TUH_CDC_CH34X_VID_PID_LIST \ { 0x1a86, 0x5523 }, /* ch341 chip */ \ { 0x1a86, 0x7522 }, /* ch340k chip */ \ -- cgit v1.3.1 From 4ce439a75a6f7aa995c74e7ac32e70ab8216c771 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 May 2024 13:58:44 +0700 Subject: add ch32 support for fsdev driver. v20x can select fsdev or usbfs with make/cmake PORT=0/1. default to fsdev --- hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h | 1 - hw/bsp/ch32v20x/family.c | 151 +++++-- hw/bsp/ch32v20x/family.cmake | 20 +- hw/bsp/ch32v20x/family.mk | 15 +- hw/bsp/ch32v20x/linker/ch32v20x.ld | 166 +++++++- src/common/tusb_compiler.h | 1 + src/common/tusb_mcu.h | 5 +- src/device/dcd.h | 7 +- src/device/usbd.c | 23 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 214 ++-------- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h | 551 ------------------------- src/portable/st/stm32_fsdev/fsdev_ch32.h | 232 +++++++++++ src/portable/st/stm32_fsdev/fsdev_common.h | 391 ++++++++++++++++++ src/portable/st/stm32_fsdev/fsdev_stm32.h | 292 +++++++++++++ src/tusb_option.h | 9 + 15 files changed, 1281 insertions(+), 797 deletions(-) delete mode 100644 src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h create mode 100644 src/portable/st/stm32_fsdev/fsdev_ch32.h create mode 100644 src/portable/st/stm32_fsdev/fsdev_common.h create mode 100644 src/portable/st/stm32_fsdev/fsdev_stm32.h (limited to 'src/common') diff --git a/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h b/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h index c8d28d90f..3ed2aef04 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h +++ b/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h @@ -8,7 +8,6 @@ extern "C" { #define LED_PORT GPIOA #define LED_PIN GPIO_Pin_15 #define LED_STATE_ON 0 -#define LED_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE) #ifdef __cplusplus } diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index 247dacde6..a0a8c3f50 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -1,82 +1,153 @@ #include #include "ch32v20x.h" + #include "bsp/board_api.h" #include "board.h" -__attribute__((interrupt)) +/* CH32v203 depending on variants can support 2 USB IPs: FSDEV and USBFS. + * By default, we use FSDEV, but you can explicitly select by define: + * - CFG_TUD_WCH_USBIP_FSDEV + * - CFG_TUD_WCH_USBIP_USBFS + */ + +// USBFS +__attribute__((interrupt)) __attribute__((used)) void USBHD_IRQHandler(void) { - tud_int_handler(0); + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +__attribute__((interrupt)) __attribute__((used)) +void USBHDWakeUp_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +// USBD (fsdev) +__attribute__((interrupt)) __attribute__((used)) +void USB_LP_CAN1_RX0_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_FSDEV + tud_int_handler(0); + #endif } +__attribute__((interrupt)) __attribute__((used)) +void USB_HP_CAN1_TX_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_FSDEV + tud_int_handler(0); + #endif + +} + +__attribute__((interrupt)) __attribute__((used)) +void USBWakeUp_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_FSDEV + tud_int_handler(0); + #endif +} + + #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; __attribute__((interrupt)) void SysTick_Handler(void) { - SysTick->SR = 0; - system_ticks++; + SysTick->SR = 0; + system_ticks++; } uint32_t SysTick_Config(uint32_t ticks) { - NVIC_EnableIRQ(SysTicK_IRQn); - SysTick->CTLR = 0; - SysTick->SR = 0; - SysTick->CNT = 0; - SysTick->CMP = ticks-1; - SysTick->CTLR = 0xF; - return 0; + NVIC_EnableIRQ(SysTicK_IRQn); + SysTick->CTLR = 0; + SysTick->SR = 0; + SysTick->CNT = 0; + SysTick->CMP = ticks - 1; + SysTick->CTLR = 0xF; + return 0; } uint32_t board_millis(void) { - return system_ticks; + return system_ticks; } #endif void board_init(void) { - __disable_irq(); + __disable_irq(); #if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(SystemCoreClock / 1000); + SysTick_Config(SystemCoreClock / 1000); #endif - switch (SystemCoreClock) { - case 48000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); break; - case 96000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div2); break; - case 144000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div3); break; - default: TU_ASSERT(0,); break; - } - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); - - LED_CLOCK_EN(); - GPIO_InitTypeDef GPIO_InitStructure = { - .GPIO_Pin = LED_PIN, - .GPIO_Mode = GPIO_Mode_Out_OD, - .GPIO_Speed = GPIO_Speed_50MHz, - }; - GPIO_Init(LED_PORT, &GPIO_InitStructure); - - __enable_irq(); - board_delay(2); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + + uint8_t usb_div; + switch (SystemCoreClock) { + case 48000000: usb_div = RCC_USBCLKSource_PLLCLK_Div1; break; + case 96000000: usb_div = RCC_USBCLKSource_PLLCLK_Div2; break; + case 144000000: usb_div = RCC_USBCLKSource_PLLCLK_Div3; break; + default: TU_ASSERT(0,); break; + } + RCC_USBCLKConfig(usb_div); + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); // FSDEV + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); // USB FS + + GPIO_InitTypeDef GPIO_InitStructure = { + .GPIO_Pin = LED_PIN, + .GPIO_Mode = GPIO_Mode_Out_OD, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(LED_PORT, &GPIO_InitStructure); + + // UART TX is PA9 + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE); + GPIO_InitTypeDef usart_init = { + .GPIO_Pin = GPIO_Pin_9, + .GPIO_Speed = GPIO_Speed_50MHz, + .GPIO_Mode = GPIO_Mode_AF_PP, + }; + GPIO_Init(GPIOA, &usart_init); + + USART_InitTypeDef usart = { + .USART_BaudRate = 115200, + .USART_WordLength = USART_WordLength_8b, + .USART_StopBits = USART_StopBits_1, + .USART_Parity = USART_Parity_No, + .USART_Mode = USART_Mode_Tx, + .USART_HardwareFlowControl = USART_HardwareFlowControl_None, + }; + USART_Init(USART1, &usart); + USART_Cmd(USART1, ENABLE); + + __enable_irq(); + board_delay(2); + + printf("SystemCoreClock = %ld\r\n", SystemCoreClock); } void board_led_write(bool state) { - GPIO_WriteBit(LED_PORT, LED_PIN, state); + GPIO_WriteBit(LED_PORT, LED_PIN, state); } uint32_t board_button_read(void) { - return false; + return false; } int board_uart_read(uint8_t *buf, int len) { - (void) buf; - (void) len; - return 0; + (void) buf; + (void) len; + return 0; } int board_uart_write(void const *buf, int len) { - (void) buf; - (void) len; - return len; + const char *bufc = (const char *) buf; + for (int i = 0; i < len; i++) { + while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET); + USART_SendData(USART1, *bufc++); + } + + return len; } diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 80b035fc0..3fb1c0e79 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -14,6 +14,11 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V20X CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") +# Port0 use FSDev, Port1 use USBFS +if (NOT DEFINED PORT) + set(PORT 0) +endif() + #------------------------------------ # BOARD_TARGET #------------------------------------ @@ -48,9 +53,20 @@ function(add_board_target BOARD_TARGET) ) target_compile_definitions(${BOARD_TARGET} PUBLIC CH32V20x_${MCU_VARIANT} - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) + if (PORT EQUAL 0) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_FSDEV=1 + ) + elseif (PORT EQUAL 1) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_USBFS=1 + ) + else() + message(FATAL_ERROR "Invalid PORT ${PORT}") + endif() + update_board(${BOARD_TARGET}) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") @@ -99,8 +115,10 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 5c8b31a1c..49d4d2feb 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -14,13 +14,23 @@ SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# Port0 use FSDev, Port1 use USBFS +PORT ?= 0 + CFLAGS += \ -mcmodel=medany \ -ffat-lto-objects \ -flto \ -DCH32V20x_${MCU_VARIANT} \ - -DCFG_TUSB_MCU=OPT_MCU_CH32V20X \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED \ + -DCFG_TUSB_MCU=OPT_MCU_CH32V20X + +ifeq ($(PORT),0) + $(info "Using FSDEV driver") + CFLAGS += -DCFG_TUD_WCH_USBIP_FSDEV=1 +else + $(info "Using USBFS driver") + CFLAGS += -DCFG_TUD_WCH_USBIP_USBFS=1 +endif LDFLAGS_GCC += \ -nostdlib -nostartfiles \ @@ -30,6 +40,7 @@ LD_FILE = $(FAMILY_PATH)/linker/${CH32_FAMILY}.ld SRC_C += \ src/portable/wch/dcd_ch32_usbfs.c \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(SDK_SRC_DIR)/Core/core_riscv.c \ $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_gpio.c \ $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_misc.c \ diff --git a/hw/bsp/ch32v20x/linker/ch32v20x.ld b/hw/bsp/ch32v20x/linker/ch32v20x.ld index 6ee2fa1c7..cd5c8dc17 100644 --- a/hw/bsp/ch32v20x/linker/ch32v20x.ld +++ b/hw/bsp/ch32v20x/linker/ch32v20x.ld @@ -1 +1,165 @@ -/* Define default values if not already defined */ __FLASH_SIZE = DEFINED(__flash_size) ? __flash_size : 64K; __RAM_SIZE = DEFINED(__ram_size) ? __ram_size : 20K; MEMORY { FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __FLASH_SIZE RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __RAM_SIZE } ENTRY( _start ) __stack_size = 2048; PROVIDE( _stack_size = __stack_size ); SECTIONS { .init : { _sinit = .; . = ALIGN(4); KEEP(*(SORT_NONE(.init))) . = ALIGN(4); _einit = .; } >FLASH AT>FLASH .vector : { *(.vector); . = ALIGN(64); } >FLASH AT>FLASH .text : { . = ALIGN(4); *(.text) *(.text.*) *(.rodata) *(.rodata*) *(.gnu.linkonce.t.*) . = ALIGN(4); } >FLASH AT>FLASH .fini : { KEEP(*(SORT_NONE(.fini))) . = ALIGN(4); } >FLASH AT>FLASH PROVIDE( _etext = . ); PROVIDE( _eitcm = . ); .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); } >FLASH AT>FLASH .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) PROVIDE_HIDDEN (__init_array_end = .); } >FLASH AT>FLASH .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) PROVIDE_HIDDEN (__fini_array_end = .); } >FLASH AT>FLASH .ctors : { /* gcc uses crtbegin.o to find the start of the constructors, so we make sure it is first. Because this is a wildcard, it doesn't matter if the user does not actually link against crtbegin.o; the linker won't look for a file to match a wildcard. The wildcard also means that it doesn't matter which directory crtbegin.o is in. */ KEEP (*crtbegin.o(.ctors)) KEEP (*crtbegin?.o(.ctors)) /* We don't want to include the .ctor section from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) } >FLASH AT>FLASH .dtors : { KEEP (*crtbegin.o(.dtors)) KEEP (*crtbegin?.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) } >FLASH AT>FLASH .dalign : { . = ALIGN(4); PROVIDE(_data_vma = .); } >RAM AT>FLASH .dlalign : { . = ALIGN(4); PROVIDE(_data_lma = .); } >FLASH AT>FLASH .data : { *(.gnu.linkonce.r.*) *(.data .data.*) *(.gnu.linkonce.d.*) . = ALIGN(8); PROVIDE( __global_pointer$ = . + 0x800 ); *(.sdata .sdata.*) *(.sdata2.*) *(.gnu.linkonce.s.*) . = ALIGN(8); *(.srodata.cst16) *(.srodata.cst8) *(.srodata.cst4) *(.srodata.cst2) *(.srodata .srodata.*) . = ALIGN(4); PROVIDE( _edata = .); } >RAM AT>FLASH .bss : { . = ALIGN(4); PROVIDE( _sbss = .); *(.sbss*) *(.gnu.linkonce.sb.*) *(.bss*) *(.gnu.linkonce.b.*) *(COMMON*) . = ALIGN(4); PROVIDE( _ebss = .); } >RAM AT>FLASH PROVIDE( _end = _ebss); PROVIDE( end = . ); .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : { PROVIDE( _heap_end = . ); . = ALIGN(4); PROVIDE(_susrstack = . ); . = . + __stack_size; PROVIDE( _eusrstack = .); } >RAM } +/* Define default values if not already defined */ +__FLASH_SIZE = DEFINED(__flash_size) ? __flash_size : 64K; +__RAM_SIZE = DEFINED(__ram_size) ? __ram_size : 20K; + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __FLASH_SIZE + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __RAM_SIZE +} + +ENTRY( _start ) + +__stack_size = 2048; + +PROVIDE( _stack_size = __stack_size ); + +SECTIONS +{ + .init : + { + _sinit = .; + . = ALIGN(4); + KEEP(*(SORT_NONE(.init))) + . = ALIGN(4); + _einit = .; + } >FLASH AT>FLASH + + .vector : + { + *(.vector); + . = ALIGN(64); + } >FLASH AT>FLASH + + .text : + { + . = ALIGN(4); + *(.text) + *(.text.*) + *(.rodata) + *(.rodata*) + *(.gnu.linkonce.t.*) + . = ALIGN(4); + } >FLASH AT>FLASH + + .fini : + { + KEEP(*(SORT_NONE(.fini))) + . = ALIGN(4); + } >FLASH AT>FLASH + + PROVIDE( _etext = . ); + PROVIDE( _eitcm = . ); + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH AT>FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) + KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH AT>FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) + KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH AT>FLASH + + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } >FLASH AT>FLASH + + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } >FLASH AT>FLASH + + .dalign : + { + . = ALIGN(4); + PROVIDE(_data_vma = .); + } >RAM AT>FLASH + + .dlalign : + { + . = ALIGN(4); + PROVIDE(_data_lma = .); + } >FLASH AT>FLASH + + .data : + { + *(.gnu.linkonce.r.*) + *(.data .data.*) + *(.gnu.linkonce.d.*) + . = ALIGN(8); + PROVIDE( __global_pointer$ = . + 0x800 ); + *(.sdata .sdata.*) + *(.sdata2.*) + *(.gnu.linkonce.s.*) + . = ALIGN(8); + *(.srodata.cst16) + *(.srodata.cst8) + *(.srodata.cst4) + *(.srodata.cst2) + *(.srodata .srodata.*) + . = ALIGN(4); + PROVIDE( _edata = .); + } >RAM AT>FLASH + + .bss : + { + . = ALIGN(4); + PROVIDE( _sbss = .); + *(.sbss*) + *(.gnu.linkonce.sb.*) + *(.bss*) + *(.gnu.linkonce.b.*) + *(COMMON*) + . = ALIGN(4); + PROVIDE( _ebss = .); + } >RAM AT>FLASH + + PROVIDE( _end = _ebss); + PROVIDE( end = . ); + + .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : + { + PROVIDE( _heap_end = . ); + . = ALIGN(4); + PROVIDE(_susrstack = . ); + . = . + __stack_size; + PROVIDE( _eusrstack = .); + } >RAM + +} diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 0d5570b1c..ce5566ffe 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -128,6 +128,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f)) #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #endif diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index af11ecb9b..c66996c4f 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -423,7 +423,6 @@ #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) // v20x support both FSDEV (USBD) and USBFS, default to FSDEV #define TUP_USBIP_WCH_USBFS - #define TUP_DCD_ENDPOINT_MAX 8 #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_CH32 @@ -431,10 +430,12 @@ #define CFG_TUD_WCH_USBIP_USBFS 0 #endif - #if !defined(CFG_TUD_WCH_FSDEV) + #if !defined(CFG_TUD_WCH_USBIP_FSDEV) #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif + #define TUP_DCD_ENDPOINT_MAX 8 + #elif TU_CHECK_MCU(OPT_MCU_CH32V307) // v307 support both FS and HS, default to HS #define TUP_USBIP_WCH_USBHS diff --git a/src/device/dcd.h b/src/device/dcd.h index 9447d6d9d..2d3dafa4c 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -39,9 +39,6 @@ // Configuration //--------------------------------------------------------------------+ -#ifndef CFG_TUD_ENDPPOINT_MAX - #define CFG_TUD_ENDPPOINT_MAX TUP_DCD_ENDPOINT_MAX -#endif //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES @@ -149,10 +146,10 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr); void dcd_remote_wakeup(uint8_t rhport); // Connect by enabling internal pull-up resistor on D+/D- -void dcd_connect(uint8_t rhport) TU_ATTR_WEAK; +void dcd_connect(uint8_t rhport); // Disconnect by disabling internal pull-up resistor on D+/D- -void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; +void dcd_disconnect(uint8_t rhport); // Enable/Disable Start-of-frame interrupt. Default is disabled void dcd_sof_enable(uint8_t rhport, bool en); diff --git a/src/device/usbd.c b/src/device/usbd.c index 9a6afd0d1..88183fad0 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -45,11 +45,6 @@ //--------------------------------------------------------------------+ // Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ -TU_ATTR_WEAK bool dcd_deinit(uint8_t rhport) { - (void) rhport; - return false; -} - TU_ATTR_WEAK void tud_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) { (void)rhport; (void)eventid; @@ -60,6 +55,19 @@ TU_ATTR_WEAK void tud_sof_cb(uint32_t frame_count) { (void)frame_count; } +TU_ATTR_WEAK bool dcd_deinit(uint8_t rhport) { + (void) rhport; + return false; +} + +TU_ATTR_WEAK void dcd_connect(uint8_t rhport) { + (void) rhport; +} + +TU_ATTR_WEAK void dcd_disconnect(uint8_t rhport) { + (void) rhport; +} + //--------------------------------------------------------------------+ // Device Data //--------------------------------------------------------------------+ @@ -379,19 +387,16 @@ bool tud_remote_wakeup(void) { } bool tud_disconnect(void) { - TU_VERIFY(dcd_disconnect); dcd_disconnect(_usbd_rhport); return true; } bool tud_connect(void) { - TU_VERIFY(dcd_connect); dcd_connect(_usbd_rhport); return true; } -bool tud_sof_cb_enable(bool en) -{ +bool tud_sof_cb_enable(bool en) { usbd_sof_enable(_usbd_rhport, SOF_CONSUMER_USER, en); return true; } diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index a26c66892..9ce37f992 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -102,25 +102,29 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && defined(TUP_USBIP_FSDEV) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_FSDEV) && \ + !(defined(TUP_USBIP_FSDEV_CH32) && CFG_TUD_WCH_USBIP_FSDEV == 0) #include "device/dcd.h" -#ifdef TUP_USBIP_FSDEV_STM32 -// Undefine to reduce the dependence on HAL -#undef USE_HAL_DRIVER -#include "portable/st/stm32_fsdev/dcd_stm32_fsdev.h" +#if defined(TUP_USBIP_FSDEV_STM32) + // Undefine to reduce the dependence on HAL + #undef USE_HAL_DRIVER + #include "fsdev_stm32.h" +#elif defined(TUP_USBIP_FSDEV_CH32) + #include "fsdev_ch32.h" +#else + #error "Unknown USB IP" #endif -/***************************************************** - * Configuration - *****************************************************/ +#include "fsdev_common.h" -// HW supports max of 8 bidirectional endpoints, but this can be reduced to save RAM -// (8u here would mean 8 IN and 8 OUT) -#ifndef MAX_EP_COUNT -#define MAX_EP_COUNT 8U -#endif +//--------------------------------------------------------------------+ +// Configuration +//--------------------------------------------------------------------+ + +// hardware limit endpoint +#define FSDEV_EP_COUNT 8 // If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it // Both of these MUST be a multiple of 2, and are in byte units. @@ -132,11 +136,6 @@ #define DCD_STM32_BTABLE_SIZE (FSDEV_PMA_SIZE - DCD_STM32_BTABLE_BASE) #endif -/*************************************************** - * Checks, structs, defines, function definitions, etc. - */ - -TU_VERIFY_STATIC((MAX_EP_COUNT) <= STFSDEV_EP_COUNT, "Only 8 endpoints supported on the hardware"); TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) + (DCD_STM32_BTABLE_SIZE)) <= (FSDEV_PMA_SIZE), "BTABLE does not fit in PMA RAM"); TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) % 8) == 0, "BTABLE base must be aligned to 8 bytes"); @@ -162,9 +161,9 @@ typedef struct { bool allocated[2]; } ep_alloc_t; -static xfer_ctl_t xfer_status[MAX_EP_COUNT][2]; +static xfer_ctl_t xfer_status[CFG_TUD_ENDPPOINT_MAX][2]; -static ep_alloc_t ep_alloc_status[STFSDEV_EP_COUNT]; +static ep_alloc_t ep_alloc_status[FSDEV_EP_COUNT]; static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[6]; @@ -199,7 +198,7 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint32_t ep_addr) uint8_t epnum = tu_edpt_number(ep_addr); uint8_t dir = tu_edpt_dir(ep_addr); // Fix -Werror=null-dereference - TU_ASSERT(epnum < MAX_EP_COUNT, &xfer_status[0][0]); + TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX, &xfer_status[0][0]); return &xfer_status[epnum][dir]; } @@ -239,7 +238,7 @@ void dcd_init(uint8_t rhport) USB->ISTR = 0; // Clear pending interrupts // Reset endpoints to disabled - for (uint32_t i = 0; i < STFSDEV_EP_COUNT; i++) { + for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // This doesn't clear all bits since some bits are "toggle", but does set the type to DISABLED. pcd_set_endpoint(USB, i, 0u); } @@ -248,43 +247,9 @@ void dcd_init(uint8_t rhport) dcd_handle_bus_reset(); // Enable pull-up if supported - if (dcd_connect) { - dcd_connect(rhport); - } -} - -// Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. -#if defined(USB_BCDR_DPPU) - -// Disable internal D+ PU -void dcd_disconnect(uint8_t rhport) -{ - (void)rhport; - USB->BCDR &= ~(USB_BCDR_DPPU); -} - -// Enable internal D+ PU -void dcd_connect(uint8_t rhport) -{ - (void)rhport; - USB->BCDR |= USB_BCDR_DPPU; -} - -#elif defined(SYSCFG_PMC_USB_PU) // works e.g. on STM32L151 -// Disable internal D+ PU -void dcd_disconnect(uint8_t rhport) -{ - (void)rhport; - SYSCFG->PMC &= ~(SYSCFG_PMC_USB_PU); + dcd_connect(rhport); } -// Enable internal D+ PU -void dcd_connect(uint8_t rhport) -{ - (void)rhport; - SYSCFG->PMC |= SYSCFG_PMC_USB_PU; -} -#endif void dcd_sof_enable(uint8_t rhport, bool en) { @@ -298,126 +263,6 @@ void dcd_sof_enable(uint8_t rhport, bool en) } } -// Enable device interrupt -void dcd_int_enable(uint8_t rhport) -{ - (void)rhport; - // Member here forces write to RAM before allowing ISR to execute - __DSB(); - __ISB(); -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || CFG_TUSB_MCU == OPT_MCU_STM32L4 - NVIC_EnableIRQ(USB_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 - NVIC_EnableIRQ(USB_LP_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F3 -// Some STM32F302/F303 devices allow to remap the USB interrupt vectors from -// shared USB/CAN IRQs to separate CAN and USB IRQs. -// This dynamically checks if this remap is active to enable the right IRQs. -#ifdef SYSCFG_CFGR1_USB_IT_RMP - if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { - NVIC_EnableIRQ(USB_HP_IRQn); - NVIC_EnableIRQ(USB_LP_IRQn); - NVIC_EnableIRQ(USBWakeUp_RMP_IRQn); - } else -#endif - { - NVIC_EnableIRQ(USB_HP_CAN_TX_IRQn); - NVIC_EnableIRQ(USB_LP_CAN_RX0_IRQn); - NVIC_EnableIRQ(USBWakeUp_IRQn); - } -#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 - NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn); - NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn); - NVIC_EnableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 - NVIC_EnableIRQ(USB_HP_IRQn); - NVIC_EnableIRQ(USB_LP_IRQn); - NVIC_EnableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 -#ifdef STM32G0B0xx - NVIC_EnableIRQ(USB_IRQn); -#else - NVIC_EnableIRQ(USB_UCPD1_2_IRQn); -#endif - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - NVIC_EnableIRQ(USB_DRD_FS_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32WB - NVIC_EnableIRQ(USB_HP_IRQn); - NVIC_EnableIRQ(USB_LP_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 - NVIC_EnableIRQ(USB_FS_IRQn); - -#else -#error Unknown arch in USB driver -#endif -} - -// Disable device interrupt -void dcd_int_disable(uint8_t rhport) -{ - (void)rhport; - -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || CFG_TUSB_MCU == OPT_MCU_STM32L4 - NVIC_DisableIRQ(USB_IRQn); -#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 - NVIC_DisableIRQ(USB_LP_IRQn); -#elif CFG_TUSB_MCU == OPT_MCU_STM32F3 -// Some STM32F302/F303 devices allow to remap the USB interrupt vectors from -// shared USB/CAN IRQs to separate CAN and USB IRQs. -// This dynamically checks if this remap is active to disable the right IRQs. -#ifdef SYSCFG_CFGR1_USB_IT_RMP - if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { - NVIC_DisableIRQ(USB_HP_IRQn); - NVIC_DisableIRQ(USB_LP_IRQn); - NVIC_DisableIRQ(USBWakeUp_RMP_IRQn); - } else -#endif - { - NVIC_DisableIRQ(USB_HP_CAN_TX_IRQn); - NVIC_DisableIRQ(USB_LP_CAN_RX0_IRQn); - NVIC_DisableIRQ(USBWakeUp_IRQn); - } -#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 - NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn); - NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); - NVIC_DisableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 - NVIC_DisableIRQ(USB_HP_IRQn); - NVIC_DisableIRQ(USB_LP_IRQn); - NVIC_DisableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 -#ifdef STM32G0B0xx - NVIC_DisableIRQ(USB_IRQn); -#else - NVIC_DisableIRQ(USB_UCPD1_2_IRQn); -#endif - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - NVIC_DisableIRQ(USB_DRD_FS_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32WB - NVIC_DisableIRQ(USB_HP_IRQn); - NVIC_DisableIRQ(USB_LP_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 - NVIC_DisableIRQ(USB_FS_IRQn); - -#else -#error Unknown arch in USB driver -#endif - - // CMSIS has a membar after disabling interrupts -} - // Receive Set Address request, mcu port must also include status IN response void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { @@ -461,7 +306,7 @@ static void dcd_handle_bus_reset(void) { USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag - for (uint32_t i = 0; i < STFSDEV_EP_COUNT; i++) { + for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // Clear EP allocation status ep_alloc_status[i].ep_num = 0xFF; ep_alloc_status[i].ep_type = 0xFF; @@ -470,7 +315,7 @@ static void dcd_handle_bus_reset(void) } // Reset PMA allocation - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * MAX_EP_COUNT; + ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX; dcd_edpt_open(0, &ep0OUT_desc); dcd_edpt_open(0, &ep0IN_desc); @@ -653,7 +498,6 @@ static void dcd_ep_ctr_handler(void) void dcd_int_handler(uint8_t rhport) { - (void)rhport; uint32_t int_status = USB->ISTR; @@ -774,7 +618,7 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - for (uint8_t i = 0; i < STFSDEV_EP_COUNT; i++) { + for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { // Check if already allocated if (ep_alloc_status[i].allocated[dir] && ep_alloc_status[i].ep_type == ep_type && @@ -818,7 +662,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) uint16_t pma_addr; uint32_t wType; - TU_ASSERT(ep_idx < STFSDEV_EP_COUNT); + TU_ASSERT(ep_idx < FSDEV_EP_COUNT); TU_ASSERT(buffer_size <= 64); // Set type @@ -865,7 +709,7 @@ void dcd_edpt_close_all(uint8_t rhport) { (void)rhport; - for (uint32_t i = 1; i < STFSDEV_EP_COUNT; i++) { + for (uint32_t i = 1; i < FSDEV_EP_COUNT; i++) { // Reset endpoint pcd_set_endpoint(USB, i, 0); // Clear EP allocation status @@ -876,7 +720,7 @@ void dcd_edpt_close_all(uint8_t rhport) } // Reset PMA allocation - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * MAX_EP_COUNT + 2 * CFG_TUD_ENDPOINT0_SIZE; + ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX + 2 * CFG_TUD_ENDPOINT0_SIZE; } /** @@ -1155,7 +999,7 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui } if (wNBytes) { - temp1 = *srcVal; + temp1 = (uint16_t) *srcVal; *pdwVal = temp1; } diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h deleted file mode 100644 index 7992f34a1..000000000 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h +++ /dev/null @@ -1,551 +0,0 @@ -/* - * Copyright(c) 2016 STMicroelectronics - * Copyright(c) N Conrad - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * This file is part of the TinyUSB stack. - */ - -// This file contains source copied from ST's HAL, and thus should have their copyright statement. - -// FSDEV_PMA_SIZE is PMA buffer size in bytes. -// On 512-byte devices, access with a stride of two words (use every other 16-bit address) -// On 1024-byte devices, access with a stride of one word (use every 16-bit address) - -#ifndef PORTABLE_ST_STM32F0_DCD_STM32F0_FSDEV_PVT_ST_H_ -#define PORTABLE_ST_STM32F0_DCD_STM32F0_FSDEV_PVT_ST_H_ - -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 - #include "stm32f0xx.h" - #define FSDEV_PMA_SIZE (1024u) - // F0x2 models are crystal-less - // All have internal D+ pull-up - // 070RB: 2 x 16 bits/word memory LPM Support, BCD Support - // PMA dedicated to USB (no sharing with CAN) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 - #include "stm32f1xx.h" - #define FSDEV_PMA_SIZE (512u) - // NO internal Pull-ups - // *B, and *C: 2 x 16 bits/word - - // F1 names this differently from the rest - #define USB_CNTR_LPMODE USB_CNTR_LP_MODE - -#elif defined(STM32F302xB) || defined(STM32F302xC) || \ - defined(STM32F303xB) || defined(STM32F303xC) || \ - defined(STM32F373xC) - #include "stm32f3xx.h" - #define FSDEV_PMA_SIZE (512u) - // NO internal Pull-ups - // *B, and *C: 1 x 16 bits/word - // PMA dedicated to USB (no sharing with CAN) - -#elif defined(STM32F302x6) || defined(STM32F302x8) || \ - defined(STM32F302xD) || defined(STM32F302xE) || \ - defined(STM32F303xD) || defined(STM32F303xE) - #include "stm32f3xx.h" - #define FSDEV_PMA_SIZE (1024u) - // NO internal Pull-ups - // *6, *8, *D, and *E: 2 x 16 bits/word LPM Support - // When CAN clock is enabled, USB can use first 768 bytes ONLY. - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L0 - #include "stm32l0xx.h" - #define FSDEV_PMA_SIZE (1024u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 - #include "stm32l1xx.h" - #define FSDEV_PMA_SIZE (512u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 - #include "stm32g4xx.h" - #define FSDEV_PMA_SIZE (1024u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 - #include "stm32g0xx.h" - #define FSDEV_BUS_32BIT - #define FSDEV_PMA_SIZE (2048u) - #undef USB_PMAADDR - #define USB_PMAADDR USB_DRD_PMAADDR - #define USB_TypeDef USB_DRD_TypeDef - #define EP0R CHEP0R - #define USB_EP_CTR_RX USB_EP_VTRX - #define USB_EP_CTR_TX USB_EP_VTTX - #define USB_EP_T_FIELD USB_CHEP_UTYPE - #define USB_EPREG_MASK USB_CHEP_REG_MASK - #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK - #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK - #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 - #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 - #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 - #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 - #define USB_EPRX_STAT USB_CH_RX_VALID - #define USB_EPKIND_MASK USB_EP_KIND_MASK - #define USB USB_DRD_FS - #define USB_CNTR_FRES USB_CNTR_USBRST - #define USB_CNTR_RESUME USB_CNTR_L2RES - #define USB_ISTR_EP_ID USB_ISTR_IDN - #define USB_EPADDR_FIELD USB_CHEP_ADDR - #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - #include "stm32h5xx.h" - #define FSDEV_BUS_32BIT - - #if !defined(USB_DRD_BASE) && defined(USB_DRD_FS_BASE) - #define USB_DRD_BASE USB_DRD_FS_BASE - #endif - - #define FSDEV_PMA_SIZE (2048u) - #undef USB_PMAADDR - #define USB_PMAADDR USB_DRD_PMAADDR - #define USB_TypeDef USB_DRD_TypeDef - #define EP0R CHEP0R - #define USB_EP_CTR_RX USB_EP_VTRX - #define USB_EP_CTR_TX USB_EP_VTTX - #define USB_EP_T_FIELD USB_CHEP_UTYPE - #define USB_EPREG_MASK USB_CHEP_REG_MASK - #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK - #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK - #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 - #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 - #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 - #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 - #define USB_EPRX_STAT USB_CH_RX_VALID - #define USB_EPKIND_MASK USB_EP_KIND_MASK - #define USB USB_DRD_FS - #define USB_CNTR_FRES USB_CNTR_USBRST - #define USB_CNTR_RESUME USB_CNTR_L2RES - #define USB_ISTR_EP_ID USB_ISTR_IDN - #define USB_EPADDR_FIELD USB_CHEP_ADDR - #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN - -#elif CFG_TUSB_MCU == OPT_MCU_STM32WB - #include "stm32wbxx.h" - #define FSDEV_PMA_SIZE (1024u) - /* ST provided header has incorrect value */ - #undef USB_PMAADDR - #define USB_PMAADDR USB1_PMAADDR - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 - #include "stm32l4xx.h" - #define FSDEV_PMA_SIZE (1024u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 - #include "stm32l5xx.h" - #define FSDEV_PMA_SIZE (1024u) - - #ifndef USB_PMAADDR - #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) - #endif - -#else - #error You are using an untested or unimplemented STM32 variant. Please update the driver. - // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4 -#endif - -// For purposes of accessing the packet -#if ((FSDEV_PMA_SIZE) == 512u) - #define FSDEV_PMA_STRIDE (2u) -#elif ((FSDEV_PMA_SIZE) == 1024u) - #define FSDEV_PMA_STRIDE (1u) -#endif - -// The fsdev_bus_t type can be used for both register and PMA access necessities -// For type-safety create a new macro for the volatile address of PMAADDR -// The compiler should warn us if we cast it to a non-volatile type? -#ifdef FSDEV_BUS_32BIT -typedef uint32_t fsdev_bus_t; -static __IO uint32_t * const pma32 = (__IO uint32_t*)USB_PMAADDR; - -#else -typedef uint16_t fsdev_bus_t; -// Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) -static __IO uint16_t * const pma = (__IO uint16_t*)USB_PMAADDR; - -TU_ATTR_ALWAYS_INLINE static inline __IO uint16_t * pcd_btable_word_ptr(USB_TypeDef * USBx, size_t x) { - size_t total_word_offset = (((USBx)->BTABLE)>>1) + x; - total_word_offset *= FSDEV_PMA_STRIDE; - return &(pma[total_word_offset]); -} - -TU_ATTR_ALWAYS_INLINE static inline __IO uint16_t* pcd_ep_tx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { - return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 1u); -} - -TU_ATTR_ALWAYS_INLINE static inline __IO uint16_t* pcd_ep_rx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { - return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 3u); -} -#endif - -/* Aligned buffer size according to hardware */ -TU_ATTR_ALWAYS_INLINE static inline uint16_t pcd_aligned_buffer_size(uint16_t size) { - /* The STM32 full speed USB peripheral supports only a limited set of - * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ - uint16_t blocksize = (size > 62) ? 32 : 2; - - // Round up while dividing requested size by blocksize - uint16_t numblocks = (size + blocksize - 1) / blocksize ; - - return numblocks * blocksize; -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wRegValue) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - __O uint32_t *reg = (__O uint32_t *)(USB_DRD_BASE + bEpIdx*4); - *reg = wRegValue; -#else - __O uint16_t *reg = (__O uint16_t *)((&USBx->EP0R) + bEpIdx*2u); - *reg = (uint16_t)wRegValue; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - __I uint32_t *reg = (__I uint32_t *)(USB_DRD_BASE + bEpIdx*4); -#else - __I uint16_t *reg = (__I uint16_t *)((&USBx->EP0R) + bEpIdx*2u); -#endif - return *reg; -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= (uint32_t)USB_EP_T_MASK; - regVal |= wType; - regVal |= USB_EP_CTR_RX | USB_EP_CTR_TX; // These clear on write0, so must set high - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_eptype(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EP_T_FIELD; - return regVal; -} - -/** - * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal &= ~USB_EP_CTR_RX; - regVal |= USB_EP_CTR_TX; // preserve CTR_TX (clears on writing 0) - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal &= ~USB_EP_CTR_TX; - regVal |= USB_EP_CTR_RX; // preserve CTR_RX (clears on writing 0) - pcd_set_endpoint(USBx, bEpIdx,regVal); -} - -/** - * @brief gets counter of the tx buffer. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval Counter value - */ -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return (pma32[2*bEpIdx] & 0x03FF0000) >> 16; -#else - __I uint16_t *regPtr = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); - return *regPtr & 0x3ffU; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return (pma32[2*bEpIdx + 1] & 0x03FF0000) >> 16; -#else - __I uint16_t *regPtr = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); - return *regPtr & 0x3ffU; -#endif -} - -#define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt -#define pcd_get_ep_dbuf1_cnt pcd_get_ep_rx_cnt - -/** - * @brief Sets address in an endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param bAddr Address. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t bAddr) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= bAddr; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx,regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return pma32[2*bEpIdx] & 0x0000FFFFu ; -#else - return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u); -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return pma32[2*bEpIdx + 1] & 0x0000FFFFu; -#else - return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u); -#endif -} - -#define pcd_get_ep_dbuf0_address pcd_get_ep_tx_address -#define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx] = (pma32[2*bEpIdx] & 0xFFFF0000u) | (addr & 0x0000FFFCu); -#else - *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u) = addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & 0xFFFF0000u) | (addr & 0x0000FFFCu); -#else - *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u) = addr; -#endif -} - -#define pcd_set_ep_dbuf0_address pcd_set_ep_tx_address -#define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx] = (pma32[2*bEpIdx] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); -#else - __IO uint16_t * reg = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); - *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); -#endif -} - -#define pcd_set_ep_tx_dbuf0_cnt pcd_set_ep_tx_cnt - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_dbuf1_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); -#else - __IO uint16_t * reg = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); - *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_blsize_num_blocks(USB_TypeDef * USBx, uint32_t rxtx_idx, - uint32_t blocksize, uint32_t numblocks) { - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[rxtx_idx] = (pma32[rxtx_idx] & 0x0000FFFFu) | (blocksize << 31) | ((numblocks - blocksize) << 26); -#else - __IO uint16_t *pdwReg = pcd_btable_word_ptr(USBx, rxtx_idx*2u + 1u); - *pdwReg = (blocksize << 15) | ((numblocks - blocksize) << 10); -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_bufsize(USB_TypeDef * USBx, uint32_t rxtx_idx, uint32_t wCount) { - wCount = pcd_aligned_buffer_size(wCount); - - /* We assume that the buffer size is already aligned to hardware requirements. */ - uint16_t blocksize = (wCount > 62) ? 1 : 0; - uint16_t numblocks = wCount / (blocksize ? 32 : 2); - - /* There should be no remainder in the above calculation */ - TU_ASSERT((wCount - (numblocks * (blocksize ? 32 : 2))) == 0, /**/); - - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ - pcd_set_ep_blsize_num_blocks(USBx, rxtx_idx, blocksize, numblocks); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_dbuf0_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { - pcd_set_ep_bufsize(USBx, 2*bEpIdx, wCount); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { - pcd_set_ep_bufsize(USBx, 2*bEpIdx + 1, wCount); -} - -#define pcd_set_ep_rx_dbuf1_cnt pcd_set_ep_rx_cnt - -/** - * @brief sets the status for tx transfer (bits STAT_TX[1:0]). - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param wState new state - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPTX_DTOGMASK; - - /* toggle first bit ? */ - if((USB_EPTX_DTOG1 & (wState))!= 0U) - { - regVal ^= USB_EPTX_DTOG1; - } - /* toggle second bit ? */ - if((USB_EPTX_DTOG2 & ((uint32_t)(wState)))!= 0U) - { - regVal ^= USB_EPTX_DTOG2; - } - - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -/** - * @brief sets the status for rx transfer (bits STAT_TX[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param wState new state - * @retval None - */ - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPRX_DTOGMASK; - - /* toggle first bit ? */ - if((USB_EPRX_DTOG1 & wState)!= 0U) { - regVal ^= USB_EPRX_DTOG1; - } - /* toggle second bit ? */ - if((USB_EPRX_DTOG2 & wState)!= 0U) { - regVal ^= USB_EPRX_DTOG2; - } - - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - return (regVal & USB_EPRX_STAT) >> (12u); -} - - -/** - * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -/** - * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - if((regVal & USB_EP_DTOG_RX) != 0) { - pcd_rx_dtog(USBx,bEpIdx); - } -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - if((regVal & USB_EP_DTOG_TX) != 0) { - pcd_tx_dtog(USBx,bEpIdx); - } -} - -/** - * @brief set & clear EP_KIND bit. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal |= USB_EP_KIND; - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPKIND_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -// This checks if the device has "LPM" -#if defined(USB_ISTR_L1REQ) -#define USB_ISTR_L1REQ_FORCED (USB_ISTR_L1REQ) -#else -#define USB_ISTR_L1REQ_FORCED ((uint16_t)0x0000U) -#endif - -#define USB_ISTR_ALL_EVENTS (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_WKUP | USB_ISTR_SUSP | \ - USB_ISTR_RESET | USB_ISTR_SOF | USB_ISTR_ESOF | USB_ISTR_L1REQ_FORCED ) - -// Number of endpoints in hardware -// TODO should use TUP_DCD_ENDPOINT_MAX -#define STFSDEV_EP_COUNT (8u) - -#endif /* PORTABLE_ST_STM32F0_DCD_STM32F0_FSDEV_PVT_ST_H_ */ diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h new file mode 100644 index 000000000..85fe3266c --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -0,0 +1,232 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2024, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ +/**

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + */ + +#ifndef TUSB_FSDEV_CH32_H +#define TUSB_FSDEV_CH32_H + +#include "common/tusb_compiler.h" + +#if CFG_TUSB_MCU == OPT_MCU_CH32V20X + #include + +#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X + #include +#endif + +#define FSDEV_PMA_SIZE (512u) + +// volatile 32-bit aligned +#define _va32 volatile TU_ATTR_ALIGNED(4) + +typedef struct { + _va32 uint16_t EP0R; // 00: USB Endpoint 0 register + _va32 uint16_t EP1R; // 04: USB Endpoint 1 register + _va32 uint16_t EP2R; // 08: USB Endpoint 2 register + _va32 uint16_t EP3R; // 0C: USB Endpoint 3 register + _va32 uint16_t EP4R; // 10: USB Endpoint 4 register + _va32 uint16_t EP5R; // 14: USB Endpoint 5 register + _va32 uint16_t EP6R; // 18: USB Endpoint 6 register + _va32 uint16_t EP7R; // 1C: USB Endpoint 7 register + _va32 uint16_t RESERVED7[16]; // Reserved + _va32 uint16_t CNTR; // 40: Control register + _va32 uint16_t ISTR; // 44: Interrupt status register + _va32 uint16_t FNR; // 48: Frame number register + _va32 uint16_t DADDR; // 4C: Device address register + _va32 uint16_t BTABLE; // 50: Buffer Table address register +} USB_TypeDef; + +TU_VERIFY_STATIC(sizeof(USB_TypeDef) == 0x54, "Size is not correct"); +TU_VERIFY_STATIC(offsetof(USB_TypeDef, CNTR) == 0x40, "Wrong offset"); + +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ +#define USB ((USB_TypeDef *)USB_BASE) + +/******************************************************************************/ +/* */ +/* USB Device General registers */ +/* */ +/******************************************************************************/ +#define USB_CNTR (USB_BASE + 0x40U) /*!< Control register */ +#define USB_ISTR (USB_BASE + 0x44U) /*!< Interrupt status register */ +#define USB_FNR (USB_BASE + 0x48U) /*!< Frame number register */ +#define USB_DADDR (USB_BASE + 0x4CU) /*!< Device address register */ +#define USB_BTABLE (USB_BASE + 0x50U) /*!< Buffer Table address register */ + +/**************************** ISTR interrupt events *************************/ +#define USB_ISTR_CTR ((uint16_t)0x8000U) /*!< Correct TRansfer (clear-only bit) */ +#define USB_ISTR_PMAOVR ((uint16_t)0x4000U) /*!< DMA OVeR/underrun (clear-only bit) */ +#define USB_ISTR_ERR ((uint16_t)0x2000U) /*!< ERRor (clear-only bit) */ +#define USB_ISTR_WKUP ((uint16_t)0x1000U) /*!< WaKe UP (clear-only bit) */ +#define USB_ISTR_SUSP ((uint16_t)0x0800U) /*!< SUSPend (clear-only bit) */ +#define USB_ISTR_RESET ((uint16_t)0x0400U) /*!< RESET (clear-only bit) */ +#define USB_ISTR_SOF ((uint16_t)0x0200U) /*!< Start Of Frame (clear-only bit) */ +#define USB_ISTR_ESOF ((uint16_t)0x0100U) /*!< Expected Start Of Frame (clear-only bit) */ +#define USB_ISTR_DIR ((uint16_t)0x0010U) /*!< DIRection of transaction (read-only bit) */ +#define USB_ISTR_EP_ID ((uint16_t)0x000FU) /*!< EndPoint IDentifier (read-only bit) */ + +/* Legacy defines */ +#define USB_ISTR_PMAOVRM USB_ISTR_PMAOVR + +#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */ +#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/ +#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */ +#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */ +#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */ +#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */ +#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */ +#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */ + +/* Legacy defines */ +#define USB_CLR_PMAOVRM USB_CLR_PMAOVR + +/************************* CNTR control register bits definitions ***********/ +#define USB_CNTR_CTRM ((uint16_t)0x8000U) /*!< Correct TRansfer Mask */ +#define USB_CNTR_PMAOVR ((uint16_t)0x4000U) /*!< DMA OVeR/underrun Mask */ +#define USB_CNTR_ERRM ((uint16_t)0x2000U) /*!< ERRor Mask */ +#define USB_CNTR_WKUPM ((uint16_t)0x1000U) /*!< WaKe UP Mask */ +#define USB_CNTR_SUSPM ((uint16_t)0x0800U) /*!< SUSPend Mask */ +#define USB_CNTR_RESETM ((uint16_t)0x0400U) /*!< RESET Mask */ +#define USB_CNTR_SOFM ((uint16_t)0x0200U) /*!< Start Of Frame Mask */ +#define USB_CNTR_ESOFM ((uint16_t)0x0100U) /*!< Expected Start Of Frame Mask */ +#define USB_CNTR_RESUME ((uint16_t)0x0010U) /*!< RESUME request */ +#define USB_CNTR_FSUSP ((uint16_t)0x0008U) /*!< Force SUSPend */ +#define USB_CNTR_LPMODE ((uint16_t)0x0004U) /*!< Low-power MODE */ +#define USB_CNTR_PDWN ((uint16_t)0x0002U) /*!< Power DoWN */ +#define USB_CNTR_FRES ((uint16_t)0x0001U) /*!< Force USB RESet */ + +/* Legacy defines */ +#define USB_CNTR_PMAOVRM USB_CNTR_PMAOVR +#define USB_CNTR_LP_MODE USB_CNTR_LPMODE + +/******************** FNR Frame Number Register bit definitions ************/ +#define USB_FNR_RXDP ((uint16_t)0x8000U) /*!< status of D+ data line */ +#define USB_FNR_RXDM ((uint16_t)0x4000U) /*!< status of D- data line */ +#define USB_FNR_LCK ((uint16_t)0x2000U) /*!< LoCKed */ +#define USB_FNR_LSOF ((uint16_t)0x1800U) /*!< Lost SOF */ +#define USB_FNR_FN ((uint16_t)0x07FFU) /*!< Frame Number */ + +/******************** DADDR Device ADDRess bit definitions ****************/ +#define USB_DADDR_EF ((uint8_t)0x80U) /*!< USB device address Enable Function */ +#define USB_DADDR_ADD ((uint8_t)0x7FU) /*!< USB device address */ + +/****************************** Endpoint register *************************/ +#define USB_EP0R USB_BASE /*!< endpoint 0 register address */ +#define USB_EP1R (USB_BASE + 0x04U) /*!< endpoint 1 register address */ +#define USB_EP2R (USB_BASE + 0x08U) /*!< endpoint 2 register address */ +#define USB_EP3R (USB_BASE + 0x0CU) /*!< endpoint 3 register address */ +#define USB_EP4R (USB_BASE + 0x10U) /*!< endpoint 4 register address */ +#define USB_EP5R (USB_BASE + 0x14U) /*!< endpoint 5 register address */ +#define USB_EP6R (USB_BASE + 0x18U) /*!< endpoint 6 register address */ +#define USB_EP7R (USB_BASE + 0x1CU) /*!< endpoint 7 register address */ +/* bit positions */ +#define USB_EP_CTR_RX ((uint16_t)0x8000U) /*!< EndPoint Correct TRansfer RX */ +#define USB_EP_DTOG_RX ((uint16_t)0x4000U) /*!< EndPoint Data TOGGLE RX */ +#define USB_EPRX_STAT ((uint16_t)0x3000U) /*!< EndPoint RX STATus bit field */ +#define USB_EP_SETUP ((uint16_t)0x0800U) /*!< EndPoint SETUP */ +#define USB_EP_T_FIELD ((uint16_t)0x0600U) /*!< EndPoint TYPE */ +#define USB_EP_KIND ((uint16_t)0x0100U) /*!< EndPoint KIND */ +#define USB_EP_CTR_TX ((uint16_t)0x0080U) /*!< EndPoint Correct TRansfer TX */ +#define USB_EP_DTOG_TX ((uint16_t)0x0040U) /*!< EndPoint Data TOGGLE TX */ +#define USB_EPTX_STAT ((uint16_t)0x0030U) /*!< EndPoint TX STATus bit field */ +#define USB_EPADDR_FIELD ((uint16_t)0x000FU) /*!< EndPoint ADDRess FIELD */ + +/* EndPoint REGister MASK (no toggle fields) */ +#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD) + /*!< EP_TYPE[1:0] EndPoint TYPE */ +#define USB_EP_TYPE_MASK ((uint16_t)0x0600U) /*!< EndPoint TYPE Mask */ +#define USB_EP_BULK ((uint16_t)0x0000U) /*!< EndPoint BULK */ +#define USB_EP_CONTROL ((uint16_t)0x0200U) /*!< EndPoint CONTROL */ +#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400U) /*!< EndPoint ISOCHRONOUS */ +#define USB_EP_INTERRUPT ((uint16_t)0x0600U) /*!< EndPoint INTERRUPT */ +#define USB_EP_T_MASK ((uint16_t) ~USB_EP_T_FIELD & USB_EPREG_MASK) + +#define USB_EPKIND_MASK ((uint16_t) ~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */ + /*!< STAT_TX[1:0] STATus for TX transfer */ +#define USB_EP_TX_DIS ((uint16_t)0x0000U) /*!< EndPoint TX DISabled */ +#define USB_EP_TX_STALL ((uint16_t)0x0010U) /*!< EndPoint TX STALLed */ +#define USB_EP_TX_NAK ((uint16_t)0x0020U) /*!< EndPoint TX NAKed */ +#define USB_EP_TX_VALID ((uint16_t)0x0030U) /*!< EndPoint TX VALID */ +#define USB_EPTX_DTOG1 ((uint16_t)0x0010U) /*!< EndPoint TX Data TOGgle bit1 */ +#define USB_EPTX_DTOG2 ((uint16_t)0x0020U) /*!< EndPoint TX Data TOGgle bit2 */ +#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK) + /*!< STAT_RX[1:0] STATus for RX transfer */ +#define USB_EP_RX_DIS ((uint16_t)0x0000U) /*!< EndPoint RX DISabled */ +#define USB_EP_RX_STALL ((uint16_t)0x1000U) /*!< EndPoint RX STALLed */ +#define USB_EP_RX_NAK ((uint16_t)0x2000U) /*!< EndPoint RX NAKed */ +#define USB_EP_RX_VALID ((uint16_t)0x3000U) /*!< EndPoint RX VALID */ +#define USB_EPRX_DTOG1 ((uint16_t)0x1000U) /*!< EndPoint RX Data TOGgle bit1 */ +#define USB_EPRX_DTOG2 ((uint16_t)0x2000U) /*!< EndPoint RX Data TOGgle bit1 */ +#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK) + + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +#if CFG_TUSB_MCU == OPT_MCU_CH32V20X +static const IRQn_Type fsdev_irq[] = { + USB_HP_CAN1_TX_IRQn, + USB_LP_CAN1_RX0_IRQn, + USBWakeUp_IRQn +}; +enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; +#else + #error "Unsupported MCU" +#endif + +void dcd_int_enable(uint8_t rhport) { + (void)rhport; + for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { + NVIC_EnableIRQ(fsdev_irq[i]); + } +} + +void dcd_int_disable(uint8_t rhport) { + (void)rhport; + for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { + NVIC_DisableIRQ(fsdev_irq[i]); + } +} + +void dcd_disconnect(uint8_t rhport) { + (void) rhport; + EXTEN->EXTEN_CTR &= ~EXTEN_USBD_PU_EN; +} + +void dcd_connect(uint8_t rhport) { + (void) rhport; + EXTEN->EXTEN_CTR |= EXTEN_USBD_PU_EN; +} + +#endif diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h new file mode 100644 index 000000000..af5d8afab --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -0,0 +1,391 @@ +/* + * The MIT License (MIT) + * + * Copyright(c) 2016 STMicroelectronics + * Copyright(c) N Conrad + * Copyright (c) 2024, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef TUSB_FSDEV_COMMON_H +#define TUSB_FSDEV_COMMON_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stdint.h" + +// FSDEV_PMA_SIZE is PMA buffer size in bytes. +// On 512-byte devices, access with a stride of two words (use every other 16-bit address) +// On 1024-byte devices, access with a stride of one word (use every 16-bit address) + +// For purposes of accessing the packet +#if ((FSDEV_PMA_SIZE) == 512u) + #define FSDEV_PMA_STRIDE (2u) +#elif ((FSDEV_PMA_SIZE) == 1024u) + #define FSDEV_PMA_STRIDE (1u) +#endif + +// The fsdev_bus_t type can be used for both register and PMA access necessities +// For type-safety create a new macro for the volatile address of PMAADDR +// The compiler should warn us if we cast it to a non-volatile type? +#ifdef FSDEV_BUS_32BIT +typedef uint32_t fsdev_bus_t; +static volatile uint32_t * const pma32 = (volatile uint32_t*)USB_PMAADDR; + +#else +typedef uint16_t fsdev_bus_t; +// Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) +static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; + +TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t * pcd_btable_word_ptr(USB_TypeDef * USBx, size_t x) { + size_t total_word_offset = (((USBx)->BTABLE)>>1) + x; + total_word_offset *= FSDEV_PMA_STRIDE; + return &(pma[total_word_offset]); +} + +TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t* pcd_ep_tx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { + return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 1u); +} + +TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t* pcd_ep_rx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { + return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 3u); +} +#endif + +/* Aligned buffer size according to hardware */ +TU_ATTR_ALWAYS_INLINE static inline uint16_t pcd_aligned_buffer_size(uint16_t size) { + /* The STM32 full speed USB peripheral supports only a limited set of + * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ + uint16_t blocksize = (size > 62) ? 32 : 2; + + // Round up while dividing requested size by blocksize + uint16_t numblocks = (size + blocksize - 1) / blocksize ; + + return numblocks * blocksize; +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wRegValue) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + volatile uint32_t *reg = (volatile uint32_t *)(USB_DRD_BASE + bEpIdx*4); + *reg = wRegValue; +#else + volatile uint16_t *reg = (volatile uint16_t *)((&USBx->EP0R) + bEpIdx*2u); + *reg = (uint16_t)wRegValue; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + volatile const uint32_t *reg = (volatile const uint32_t *)(USB_DRD_BASE + bEpIdx*4); +#else + volatile const uint16_t *reg = (volatile const uint16_t *)((&USBx->EP0R) + bEpIdx*2u); +#endif + return *reg; +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= (uint32_t)USB_EP_T_MASK; + regVal |= wType; + regVal |= USB_EP_CTR_RX | USB_EP_CTR_TX; // These clear on write0, so must set high + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_eptype(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EP_T_FIELD; + return regVal; +} + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @retval None + */ +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal &= ~USB_EP_CTR_RX; + regVal |= USB_EP_CTR_TX; // preserve CTR_TX (clears on writing 0) + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal &= ~USB_EP_CTR_TX; + regVal |= USB_EP_CTR_RX; // preserve CTR_RX (clears on writing 0) + pcd_set_endpoint(USBx, bEpIdx,regVal); +} + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @retval Counter value + */ +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return (pma32[2*bEpIdx] & 0x03FF0000) >> 16; +#else + volatile const uint16_t *regPtr = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); + return *regPtr & 0x3ffU; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return (pma32[2*bEpIdx + 1] & 0x03FF0000) >> 16; +#else + volatile const uint16_t *regPtr = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); + return *regPtr & 0x3ffU; +#endif +} + +#define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt +#define pcd_get_ep_dbuf1_cnt pcd_get_ep_rx_cnt + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @param bAddr Address. + * @retval None + */ +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t bAddr) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal |= bAddr; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx,regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return pma32[2*bEpIdx] & 0x0000FFFFu ; +#else + return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u); +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return pma32[2*bEpIdx + 1] & 0x0000FFFFu; +#else + return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u); +#endif +} + +#define pcd_get_ep_dbuf0_address pcd_get_ep_tx_address +#define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx] = (pma32[2*bEpIdx] & 0xFFFF0000u) | (addr & 0x0000FFFCu); +#else + *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u) = addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & 0xFFFF0000u) | (addr & 0x0000FFFCu); +#else + *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u) = addr; +#endif +} + +#define pcd_set_ep_dbuf0_address pcd_set_ep_tx_address +#define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx] = (pma32[2*bEpIdx] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); +#else + volatile uint16_t * reg = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); + *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); +#endif +} + +#define pcd_set_ep_tx_dbuf0_cnt pcd_set_ep_tx_cnt + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_dbuf1_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); +#else + volatile uint16_t * reg = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); + *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_blsize_num_blocks(USB_TypeDef * USBx, uint32_t rxtx_idx, + uint32_t blocksize, uint32_t numblocks) { + /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[rxtx_idx] = (pma32[rxtx_idx] & 0x0000FFFFu) | (blocksize << 31) | ((numblocks - blocksize) << 26); +#else + volatile uint16_t *pdwReg = pcd_btable_word_ptr(USBx, rxtx_idx*2u + 1u); + *pdwReg = (blocksize << 15) | ((numblocks - blocksize) << 10); +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_bufsize(USB_TypeDef * USBx, uint32_t rxtx_idx, uint32_t wCount) { + wCount = pcd_aligned_buffer_size(wCount); + + /* We assume that the buffer size is already aligned to hardware requirements. */ + uint16_t blocksize = (wCount > 62) ? 1 : 0; + uint16_t numblocks = wCount / (blocksize ? 32 : 2); + + /* There should be no remainder in the above calculation */ + TU_ASSERT((wCount - (numblocks * (blocksize ? 32 : 2))) == 0, /**/); + + /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ + pcd_set_ep_blsize_num_blocks(USBx, rxtx_idx, blocksize, numblocks); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_dbuf0_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { + pcd_set_ep_bufsize(USBx, 2*bEpIdx, wCount); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { + pcd_set_ep_bufsize(USBx, 2*bEpIdx + 1, wCount); +} + +#define pcd_set_ep_rx_dbuf1_cnt pcd_set_ep_rx_cnt + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @param wState new state + * @retval None + */ +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPTX_DTOGMASK; + + /* toggle first bit ? */ + if((USB_EPTX_DTOG1 & (wState))!= 0U) + { + regVal ^= USB_EPTX_DTOG1; + } + /* toggle second bit ? */ + if((USB_EPTX_DTOG2 & ((uint32_t)(wState)))!= 0U) + { + regVal ^= USB_EPTX_DTOG2; + } + + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @param wState new state + * @retval None + */ + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPRX_DTOGMASK; + + /* toggle first bit ? */ + if((USB_EPRX_DTOG1 & wState)!= 0U) { + regVal ^= USB_EPRX_DTOG1; + } + /* toggle second bit ? */ + if((USB_EPRX_DTOG2 & wState)!= 0U) { + regVal ^= USB_EPRX_DTOG2; + } + + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + return (regVal & USB_EPRX_STAT) >> (12u); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + if((regVal & USB_EP_DTOG_RX) != 0) { + pcd_rx_dtog(USBx,bEpIdx); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + if((regVal & USB_EP_DTOG_TX) != 0) { + pcd_tx_dtog(USBx,bEpIdx); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal |= USB_EP_KIND; + regVal &= USB_EPREG_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPKIND_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h new file mode 100644 index 000000000..b3fa11b88 --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -0,0 +1,292 @@ +/* + * The MIT License (MIT) + * + * Copyright(c) N Conrad + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef TUSB_FSDEV_STM32_H +#define TUSB_FSDEV_STM32_H + +#if CFG_TUSB_MCU == OPT_MCU_STM32F0 + #include "stm32f0xx.h" + #define FSDEV_PMA_SIZE (1024u) + // F0x2 models are crystal-less + // All have internal D+ pull-up + // 070RB: 2 x 16 bits/word memory LPM Support, BCD Support + // PMA dedicated to USB (no sharing with CAN) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 + #include "stm32f1xx.h" + #define FSDEV_PMA_SIZE (512u) + // NO internal Pull-ups + // *B, and *C: 2 x 16 bits/word + + // F1 names this differently from the rest + #define USB_CNTR_LPMODE USB_CNTR_LP_MODE + +#elif defined(STM32F302xB) || defined(STM32F302xC) || \ + defined(STM32F303xB) || defined(STM32F303xC) || \ + defined(STM32F373xC) + #include "stm32f3xx.h" + #define FSDEV_PMA_SIZE (512u) + // NO internal Pull-ups + // *B, and *C: 1 x 16 bits/word + // PMA dedicated to USB (no sharing with CAN) + +#elif defined(STM32F302x6) || defined(STM32F302x8) || \ + defined(STM32F302xD) || defined(STM32F302xE) || \ + defined(STM32F303xD) || defined(STM32F303xE) + #include "stm32f3xx.h" + #define FSDEV_PMA_SIZE (1024u) + // NO internal Pull-ups + // *6, *8, *D, and *E: 2 x 16 bits/word LPM Support + // When CAN clock is enabled, USB can use first 768 bytes ONLY. + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L0 + #include "stm32l0xx.h" + #define FSDEV_PMA_SIZE (1024u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 + #include "stm32l1xx.h" + #define FSDEV_PMA_SIZE (512u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 + #include "stm32g4xx.h" + #define FSDEV_PMA_SIZE (1024u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 + #include "stm32g0xx.h" + #define FSDEV_BUS_32BIT + #define FSDEV_PMA_SIZE (2048u) + #undef USB_PMAADDR + #define USB_PMAADDR USB_DRD_PMAADDR + #define USB_TypeDef USB_DRD_TypeDef + #define EP0R CHEP0R + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB USB_DRD_FS + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + +#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 + #include "stm32h5xx.h" + #define FSDEV_BUS_32BIT + + #if !defined(USB_DRD_BASE) && defined(USB_DRD_FS_BASE) + #define USB_DRD_BASE USB_DRD_FS_BASE + #endif + + #define FSDEV_PMA_SIZE (2048u) + #undef USB_PMAADDR + #define USB_PMAADDR USB_DRD_PMAADDR + #define USB_TypeDef USB_DRD_TypeDef + #define EP0R CHEP0R + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB USB_DRD_FS + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + +#elif CFG_TUSB_MCU == OPT_MCU_STM32WB + #include "stm32wbxx.h" + #define FSDEV_PMA_SIZE (1024u) + /* ST provided header has incorrect value */ + #undef USB_PMAADDR + #define USB_PMAADDR USB1_PMAADDR + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 + #include "stm32l4xx.h" + #define FSDEV_PMA_SIZE (1024u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 + #include "stm32l5xx.h" + #define FSDEV_PMA_SIZE (1024u) + + #ifndef USB_PMAADDR + #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) + #endif + +#else + #error You are using an untested or unimplemented STM32 variant. Please update the driver. + // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4 +#endif + +// This checks if the device has "LPM" +#if defined(USB_ISTR_L1REQ) +#define USB_ISTR_L1REQ_FORCED (USB_ISTR_L1REQ) +#else +#define USB_ISTR_L1REQ_FORCED ((uint16_t)0x0000U) +#endif + +#define USB_ISTR_ALL_EVENTS (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_WKUP | USB_ISTR_SUSP | \ + USB_ISTR_RESET | USB_ISTR_SOF | USB_ISTR_ESOF | USB_ISTR_L1REQ_FORCED ) + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +#if TU_CHECK_MCU(OPT_MCU_STM32L1) && !defined(USBWakeUp_IRQn) + #define USBWakeUp_IRQn USB_FS_WKUP_IRQn +#endif + +static const IRQn_Type fsdev_irq[] = { + #if TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32L0, OPT_MCU_STM32L4) + USB_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32F1 + USB_HP_CAN1_TX_IRQn, + USB_LP_CAN1_RX0_IRQn, + USBWakeUp_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32F3 + // USB remap handles dcd functions + USB_HP_CAN_TX_IRQn, + USB_LP_CAN_RX0_IRQn, + USBWakeUp_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32G0 + #ifdef STM32G0B0xx + USB_IRQn, + #else + USB_UCPD1_2_IRQn, + #endif + #elif TU_CHECK_MCU(OPT_MCU_STM32G4, OPT_MCU_STM32L1) + USB_HP_IRQn, + USB_LP_IRQn, + USBWakeUp_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32H5 + USB_DRD_FS_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32L5 + USB_FS_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32WB + USB_HP_IRQn, + USB_LP_IRQn, + #else + #error Unknown arch in USB driver + #endif +}; +enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; + +void dcd_int_enable(uint8_t rhport) { + (void)rhport; + + // forces write to RAM before allowing ISR to execute + __DSB(); __ISB(); + + #if CFG_TUSB_MCU == OPT_MCU_STM32F3 && defined(SYSCFG_CFGR1_USB_IT_RMP) + // Some STM32F302/F303 devices allow to remap the USB interrupt vectors from + // shared USB/CAN IRQs to separate CAN and USB IRQs. + // This dynamically checks if this remap is active to enable the right IRQs. + if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { + NVIC_EnableIRQ(USB_HP_IRQn); + NVIC_EnableIRQ(USB_LP_IRQn); + NVIC_EnableIRQ(USBWakeUp_RMP_IRQn); + } else + #endif + { + for (uint8_t i = 0; i < FSDEV_IRQ_NUM; i++) { + NVIC_EnableIRQ(fsdev_irq[i]); + } + } +} + +void dcd_int_disable(uint8_t rhport) { + (void)rhport; + + #if CFG_TUSB_MCU == OPT_MCU_STM32F3 && defined(SYSCFG_CFGR1_USB_IT_RMP) + // Some STM32F302/F303 devices allow to remap the USB interrupt vectors from + // shared USB/CAN IRQs to separate CAN and USB IRQs. + // This dynamically checks if this remap is active to enable the right IRQs. + if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { + NVIC_DisableIRQ(USB_HP_IRQn); + NVIC_DisableIRQ(USB_LP_IRQn); + NVIC_DisableIRQ(USBWakeUp_RMP_IRQn); + } else + #endif + { + for (uint8_t i = 0; i < FSDEV_IRQ_NUM; i++) { + NVIC_DisableIRQ(fsdev_irq[i]); + } + } + + // CMSIS has a membar after disabling interrupts +} + +// Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. +#if defined(USB_BCDR_DPPU) + +void dcd_disconnect(uint8_t rhport) { + (void)rhport; + USB->BCDR &= ~(USB_BCDR_DPPU); +} + +void dcd_connect(uint8_t rhport) { + (void)rhport; + USB->BCDR |= USB_BCDR_DPPU; +} + +#elif defined(SYSCFG_PMC_USB_PU) // works e.g. on STM32L151 + +void dcd_disconnect(uint8_t rhport) { + (void)rhport; + SYSCFG->PMC &= ~(SYSCFG_PMC_USB_PU); +} + +void dcd_connect(uint8_t rhport) { + (void)rhport; + SYSCFG->PMC |= SYSCFG_PMC_USB_PU; +} +#endif + + +#endif /* TUSB_FSDEV_STM32_H */ diff --git a/src/tusb_option.h b/src/tusb_option.h index d74510b60..674c05e54 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -374,6 +374,15 @@ #define CFG_TUD_INTERFACE_MAX 16 #endif +// default to max hardware endpoint, but can be smaller to save RAM +#ifndef CFG_TUD_ENDPPOINT_MAX + #define CFG_TUD_ENDPPOINT_MAX TUP_DCD_ENDPOINT_MAX +#endif + +#if CFG_TUD_ENDPPOINT_MAX > TUP_DCD_ENDPOINT_MAX + #error "CFG_TUD_ENDPPOINT_MAX must be less than or equal to TUP_DCD_ENDPOINT_MAX" +#endif + // USB 2.0 compliance test mode support #ifndef CFG_TUD_TEST_MODE #define CFG_TUD_TEST_MODE 0 -- cgit v1.3.1 From 60d7fcb1ee8dcc4870221e97c1e3fba5463a9d45 Mon Sep 17 00:00:00 2001 From: Tinic Uro Date: Thu, 30 May 2024 13:26:14 -0700 Subject: Use correct backend. --- src/common/tusb_mcu.h | 25 +++++++++++++-------- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 2 +- src/portable/st/stm32_fsdev/fsdev_stm32.h | 31 +++++++++++++++++++++++++++ src/portable/synopsys/dwc2/dwc2_stm32.h | 11 +--------- 4 files changed, 49 insertions(+), 20 deletions(-) (limited to 'src/common') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index c66996c4f..0f4fca8d1 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -271,17 +271,24 @@ #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U5) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_STM32 + #ifdef USB_DRD_FS + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define TUP_DCD_ENDPOINT_MAX 8 - // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY - #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ - defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_USBIP_DWC2_TEST_MODE #else - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY + #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ + defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_USBIP_DWC2_TEST_MODE + #else + #define TUP_DCD_ENDPOINT_MAX 6 + #endif #endif #elif TU_CHECK_MCU(OPT_MCU_STM32L5) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 9ce37f992..5f230d86f 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -232,7 +232,7 @@ void dcd_init(uint8_t rhport) } USB->CNTR = 0; // Enable USB -#if !defined(STM32G0) && !defined(STM32H5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address +#if !defined(STM32G0) && !defined(STM32H5) && !defined(STM32U5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address USB->BTABLE = DCD_STM32_BTABLE_BASE; #endif USB->ISTR = 0; // Clear pending interrupts diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index b3fa11b88..a5199c9e3 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -159,6 +159,35 @@ #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) #endif +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #include "stm32u5xx.h" + #define FSDEV_BUS_32BIT + + #define FSDEV_PMA_SIZE (2048u) + #undef USB_PMAADDR + #define USB_PMAADDR USB_DRD_PMAADDR + #define USB_TypeDef USB_DRD_TypeDef + #define EP0R CHEP0R + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB USB_DRD_FS + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + #else #error You are using an untested or unimplemented STM32 variant. Please update the driver. // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4 @@ -211,6 +240,8 @@ static const IRQn_Type fsdev_irq[] = { #elif CFG_TUSB_MCU == OPT_MCU_STM32WB USB_HP_IRQn, USB_LP_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + USB_IRQn, #else #error Unknown arch in USB driver #endif diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 4f311782d..eaac2c44b 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -84,16 +84,11 @@ extern "C" { #elif CFG_TUSB_MCU == OPT_MCU_STM32U5 #include "stm32u5xx.h" + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #ifdef USB_OTG_FS #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 - // U53x/U54x are fullspeed with built-in FS PHY but not OTG - #elif defined(USB_DRD_FS) - #define USB_DRD_FS_PERIPH_BASE USB_DRD_BASE - #define EP_MAX_FS 8 - #define EP_FIFO_SIZE_FS 2048 - // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #else #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE #define EP_MAX_HS 9 @@ -113,10 +108,6 @@ extern "C" { // On STM32 for consistency we associate // - Port0 to OTG_FS, and Port1 to OTG_HS static const dwc2_controller_t _dwc2_controller[] = { - #ifdef USB_DRD_FS_PERIPH_BASE - { .reg_base = USB_DRD_FS_PERIPH_BASE, .irqnum = USB_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, - #endif - #ifdef USB_OTG_FS_PERIPH_BASE { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = USB_OTG_FS_IRQN, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, #endif -- cgit v1.3.1 From bc576e7cee64fedfa977604f8e9e4043b3473ece Mon Sep 17 00:00:00 2001 From: Tinic Uro Date: Wed, 12 Jun 2024 08:33:10 -0700 Subject: Make it work. --- hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk | 1 + hw/bsp/stm32u5/boards/stm32u575eval/board.mk | 1 + hw/bsp/stm32u5/family.mk | 2 +- src/common/tusb_mcu.h | 2 +- 4 files changed, 4 insertions(+), 2 deletions(-) (limited to 'src/common') diff --git a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk index 66cba0c2b..072c595fb 100644 --- a/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u545nucleo/board.mk @@ -6,5 +6,6 @@ LD_FILE = ${FAMILY_PATH}/linker/STM32U545xx_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u545xx.s +MCU_VARIANT = stm32u545xx # For flash-jlink target JLINK_DEVICE = stm32u545re diff --git a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk index 922d67f83..fee56f2ba 100644 --- a/hw/bsp/stm32u5/boards/stm32u575eval/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575eval/board.mk @@ -6,5 +6,6 @@ LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s +MCU_VARIANT = stm32u575xx # For flash-jlink target JLINK_DEVICE = stm32u575ai diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 45f9aa33e..9ab8992a8 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -41,7 +41,7 @@ SRC_C += \ ifeq ($(MCU_VARIANT),stm32u545xx) SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c -else ($(MCU_VARIANT),stm32u535xx) +else ifeq ($(MCU_VARIANT),stm32u535xx) SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c else diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0f4fca8d1..4b802138b 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -271,7 +271,7 @@ #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U5) - #ifdef USB_DRD_FS + #if defined (STM32U535xx) || defined (STM32U545xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 #define TUP_DCD_ENDPOINT_MAX 8 -- cgit v1.3.1 From 33f5547ed435f33259afc2a8e906eb7a258fbdd6 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 14 Jun 2024 16:06:37 +0700 Subject: add ch32v103 bsp support, compile but does not run, probably due to compile/linker issue --- .../ch32v10x/boards/ch32v103r_r1_1v0/board.cmake | 8 + hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h | 20 + hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk | 7 + hw/bsp/ch32v10x/ch32v10x_conf.h | 37 ++ hw/bsp/ch32v10x/ch32v10x_it.h | 15 + hw/bsp/ch32v10x/family.c | 147 +++++ hw/bsp/ch32v10x/family.cmake | 117 ++++ hw/bsp/ch32v10x/family.mk | 53 ++ hw/bsp/ch32v10x/linker/ch32v10x.ld | 165 ++++++ hw/bsp/ch32v10x/system_ch32v10x.c | 600 +++++++++++++++++++++ hw/bsp/ch32v10x/system_ch32v10x.h | 29 + hw/bsp/ch32v10x/wch-riscv.cfg | 17 + hw/bsp/ch32v20x/family.mk | 10 +- hw/bsp/family_support.cmake | 2 +- src/common/tusb_mcu.h | 9 + src/portable/wch/ch32_usbfs_reg.h | 67 ++- src/tusb_option.h | 6 +- tools/get_deps.py | 3 + 18 files changed, 1296 insertions(+), 16 deletions(-) create mode 100644 hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake create mode 100644 hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h create mode 100644 hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk create mode 100644 hw/bsp/ch32v10x/ch32v10x_conf.h create mode 100644 hw/bsp/ch32v10x/ch32v10x_it.h create mode 100644 hw/bsp/ch32v10x/family.c create mode 100644 hw/bsp/ch32v10x/family.cmake create mode 100644 hw/bsp/ch32v10x/family.mk create mode 100644 hw/bsp/ch32v10x/linker/ch32v10x.ld create mode 100644 hw/bsp/ch32v10x/system_ch32v10x.c create mode 100644 hw/bsp/ch32v10x/system_ch32v10x.h create mode 100644 hw/bsp/ch32v10x/wch-riscv.cfg (limited to 'src/common') diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake new file mode 100644 index 000000000..f6e47ba30 --- /dev/null +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake @@ -0,0 +1,8 @@ +set(LD_FLASH_SIZE 64K) +set(LD_RAM_SIZE 20K) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CFG_EXAMPLE_MSC_DUAL_READONLY + ) +endfunction() diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h new file mode 100644 index 000000000..3b1187c3a --- /dev/null +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h @@ -0,0 +1,20 @@ +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_PORT GPIOA +#define LED_PIN GPIO_Pin_10 +#define LED_STATE_ON 0 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_Pin_1 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk new file mode 100644 index 000000000..7d7462312 --- /dev/null +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = D6 + +CFLAGS += -DCFG_EXAMPLE_MSC_DUAL_READONLY + +LDFLAGS += \ + -Wl,--defsym=__flash_size=64K \ + -Wl,--defsym=__ram_size=20K \ diff --git a/hw/bsp/ch32v10x/ch32v10x_conf.h b/hw/bsp/ch32v10x/ch32v10x_conf.h new file mode 100644 index 000000000..939c0fbde --- /dev/null +++ b/hw/bsp/ch32v10x/ch32v10x_conf.h @@ -0,0 +1,37 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v10x_conf.h + * Author : WCH + * Version : V1.0.0 + * Date : 2020/04/30 + * Description : Library configuration file. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V10x_CONF_H +#define __CH32V10x_CONF_H + +#include "ch32v10x_adc.h" +#include "ch32v10x_bkp.h" +#include "ch32v10x_crc.h" +#include "ch32v10x_dbgmcu.h" +#include "ch32v10x_dma.h" +#include "ch32v10x_exti.h" +#include "ch32v10x_flash.h" +#include "ch32v10x_gpio.h" +#include "ch32v10x_i2c.h" +#include "ch32v10x_iwdg.h" +#include "ch32v10x_pwr.h" +#include "ch32v10x_rcc.h" +#include "ch32v10x_rtc.h" +#include "ch32v10x_spi.h" +#include "ch32v10x_tim.h" +#include "ch32v10x_usart.h" +#include "ch32v10x_wwdg.h" +#include "ch32v10x_usb.h" +#include "ch32v10x_usb_host.h" +#include "ch32v10x_it.h" +#include "ch32v10x_misc.h" + +#endif /* __CH32V10x_CONF_H */ diff --git a/hw/bsp/ch32v10x/ch32v10x_it.h b/hw/bsp/ch32v10x/ch32v10x_it.h new file mode 100644 index 000000000..13afc2412 --- /dev/null +++ b/hw/bsp/ch32v10x/ch32v10x_it.h @@ -0,0 +1,15 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v10x_it.h + * Author : WCH + * Version : V1.0.0 + * Date : 2022/08/20 + * Description : This file contains the headers of the interrupt handlers. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V10x_IT_H +#define __CH32V10x_IT_H + +#endif /* __CH32V10x_IT_H */ diff --git a/hw/bsp/ch32v10x/family.c b/hw/bsp/ch32v10x/family.c new file mode 100644 index 000000000..6de17521e --- /dev/null +++ b/hw/bsp/ch32v10x/family.c @@ -0,0 +1,147 @@ +#include + +// https://github.com/openwch/ch32v307/pull/90 +// https://github.com/openwch/ch32v20x/pull/12 +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + +#include "ch32v10x.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + +__attribute__((interrupt)) __attribute__((used)) +void USBHD_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +__attribute__((interrupt)) __attribute__((used)) +void USBHDWakeUp_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +__attribute__((interrupt)) __attribute__((used)) +void SysTick_Handler(void) { + SysTick->CNTL0 = SysTick->CNTL1 = SysTick->CNTL2 = SysTick->CNTL3 = 0; + SysTick->CNTH0 = SysTick->CNTH1 = SysTick->CNTH2 = SysTick->CNTH3 = 0; + system_ticks++; +} + +uint32_t SysTick_Config(uint32_t ticks) { + NVIC_EnableIRQ(SysTicK_IRQn); + SysTick->CTLR = 0; + SysTick->CNTL0 = SysTick->CNTL1 = SysTick->CNTL2 = SysTick->CNTL3 = 0; + SysTick->CNTH0 = SysTick->CNTH1 = SysTick->CNTH2 = SysTick->CNTH3 = 0; + + SysTick->CMPLR0 = (u8)(ticks & 0xFF); + SysTick->CMPLR1 = (u8)(ticks >> 8); + SysTick->CMPLR2 = (u8)(ticks >> 16); + SysTick->CMPLR3 = (u8)(ticks >> 24); + + SysTick->CMPHR0 = SysTick->CMPHR1 = SysTick->CMPHR2 = SysTick->CMPHR3 = 0; + SysTick->CTLR = 1; + return 0; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void board_init(void) { + __disable_irq(); + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(SystemCoreClock / 1000); +#endif + + uint8_t usb_div; + switch (SystemCoreClock) { + case 48000000: usb_div = RCC_USBCLKSource_PLLCLK_Div1; break; + case 72000000: usb_div = RCC_USBCLKSource_PLLCLK_1Div5; break; + default: TU_ASSERT(0,); break; + } + RCC_USBCLKConfig(usb_div); + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + + #ifdef LED_PIN + GPIO_InitTypeDef led_init = { + .GPIO_Pin = LED_PIN, + .GPIO_Mode = GPIO_Mode_Out_OD, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(LED_PORT, &led_init); + #endif + + #ifdef BUTTON_PIN + GPIO_InitTypeDef button_init = { + .GPIO_Pin = BUTTON_PIN, + .GPIO_Mode = GPIO_Mode_IPU, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(BUTTON_PORT, &button_init); + #endif + + // UART TX is PA9 + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE); + GPIO_InitTypeDef usart_init = { + .GPIO_Pin = GPIO_Pin_9, + .GPIO_Speed = GPIO_Speed_50MHz, + .GPIO_Mode = GPIO_Mode_AF_PP, + }; + GPIO_Init(GPIOA, &usart_init); + + USART_InitTypeDef usart = { + .USART_BaudRate = 115200, + .USART_WordLength = USART_WordLength_8b, + .USART_StopBits = USART_StopBits_1, + .USART_Parity = USART_Parity_No, + .USART_Mode = USART_Mode_Tx, + .USART_HardwareFlowControl = USART_HardwareFlowControl_None, + }; + USART_Init(USART1, &usart); + USART_Cmd(USART1, ENABLE); + + __enable_irq(); + + board_led_write(true); +} + +void board_led_write(bool state) { + GPIO_WriteBit(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == GPIO_ReadInputDataBit(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + const char *bufc = (const char *) buf; + for (int i = 0; i < len; i++) { + while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET); + USART_SendData(USART1, *bufc++); + } + + return len; +} diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake new file mode 100644 index 000000000..b0d8241d3 --- /dev/null +++ b/hw/bsp/ch32v10x/family.cmake @@ -0,0 +1,117 @@ +include_guard() + +#set(UF2_FAMILY_ID 0x699b62ec) +set(CH32_FAMILY ch32v10x) +set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v103) +set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CH32V103 CACHE INTERNAL "") +set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${CH32_FAMILY}.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_SRC_DIR}/Core/core_riscv.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_SRC_DIR}/Core + ${SDK_SRC_DIR}/Peripheral/inc + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -mcmodel=medany + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -Wl,--defsym=__flash_size=${LD_FLASH_SIZE} + -Wl,--defsym=__ram_size=${LD_RAM_SIZE} + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_CH32V103 ${RTOS}) + + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd_wch(${TARGET}) + + #family_add_uf2(${TARGET} ${UF2_FAMILY_ID}) + #family_flash_uf2(${TARGET} ${UF2_FAMILY_ID}) +endfunction() diff --git a/hw/bsp/ch32v10x/family.mk b/hw/bsp/ch32v10x/family.mk new file mode 100644 index 000000000..d96d5012e --- /dev/null +++ b/hw/bsp/ch32v10x/family.mk @@ -0,0 +1,53 @@ +# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable +#CROSS_COMPILE ?= riscv32-unknown-elf- + +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- + +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +CROSS_COMPILE ?= riscv-none-elf- + +CH32_FAMILY = ch32v10x +SDK_DIR = hw/mcu/wch/ch32v103 +SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= rv32imac-ilp32 + +# Port0 use FSDev, Port1 use USBFS +PORT ?= 0 + +CFLAGS += \ + -mcmodel=medany \ + -ffat-lto-objects \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_CH32V103 + +# https://github.com/openwch/ch32v20x/pull/12 +CFLAGS += -Wno-error=strict-prototypes + +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs \ + +LD_FILE = $(FAMILY_PATH)/linker/${CH32_FAMILY}.ld + +SRC_C += \ + src/portable/wch/dcd_ch32_usbfs.c \ + $(SDK_SRC_DIR)/Core/core_riscv.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_rcc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_usart.c \ + +SRC_S += $(SDK_SRC_DIR)/Startup/startup_${CH32_FAMILY}.S + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_SRC_DIR)/Core \ + $(TOP)/$(SDK_SRC_DIR)/Peripheral/inc \ + +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V + +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/hw/bsp/ch32v10x/linker/ch32v10x.ld b/hw/bsp/ch32v10x/linker/ch32v10x.ld new file mode 100644 index 000000000..cd5c8dc17 --- /dev/null +++ b/hw/bsp/ch32v10x/linker/ch32v10x.ld @@ -0,0 +1,165 @@ +/* Define default values if not already defined */ +__FLASH_SIZE = DEFINED(__flash_size) ? __flash_size : 64K; +__RAM_SIZE = DEFINED(__ram_size) ? __ram_size : 20K; + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __FLASH_SIZE + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __RAM_SIZE +} + +ENTRY( _start ) + +__stack_size = 2048; + +PROVIDE( _stack_size = __stack_size ); + +SECTIONS +{ + .init : + { + _sinit = .; + . = ALIGN(4); + KEEP(*(SORT_NONE(.init))) + . = ALIGN(4); + _einit = .; + } >FLASH AT>FLASH + + .vector : + { + *(.vector); + . = ALIGN(64); + } >FLASH AT>FLASH + + .text : + { + . = ALIGN(4); + *(.text) + *(.text.*) + *(.rodata) + *(.rodata*) + *(.gnu.linkonce.t.*) + . = ALIGN(4); + } >FLASH AT>FLASH + + .fini : + { + KEEP(*(SORT_NONE(.fini))) + . = ALIGN(4); + } >FLASH AT>FLASH + + PROVIDE( _etext = . ); + PROVIDE( _eitcm = . ); + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH AT>FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) + KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH AT>FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) + KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH AT>FLASH + + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } >FLASH AT>FLASH + + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } >FLASH AT>FLASH + + .dalign : + { + . = ALIGN(4); + PROVIDE(_data_vma = .); + } >RAM AT>FLASH + + .dlalign : + { + . = ALIGN(4); + PROVIDE(_data_lma = .); + } >FLASH AT>FLASH + + .data : + { + *(.gnu.linkonce.r.*) + *(.data .data.*) + *(.gnu.linkonce.d.*) + . = ALIGN(8); + PROVIDE( __global_pointer$ = . + 0x800 ); + *(.sdata .sdata.*) + *(.sdata2.*) + *(.gnu.linkonce.s.*) + . = ALIGN(8); + *(.srodata.cst16) + *(.srodata.cst8) + *(.srodata.cst4) + *(.srodata.cst2) + *(.srodata .srodata.*) + . = ALIGN(4); + PROVIDE( _edata = .); + } >RAM AT>FLASH + + .bss : + { + . = ALIGN(4); + PROVIDE( _sbss = .); + *(.sbss*) + *(.gnu.linkonce.sb.*) + *(.bss*) + *(.gnu.linkonce.b.*) + *(COMMON*) + . = ALIGN(4); + PROVIDE( _ebss = .); + } >RAM AT>FLASH + + PROVIDE( _end = _ebss); + PROVIDE( end = . ); + + .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : + { + PROVIDE( _heap_end = . ); + . = ALIGN(4); + PROVIDE(_susrstack = . ); + . = . + __stack_size; + PROVIDE( _eusrstack = .); + } >RAM + +} diff --git a/hw/bsp/ch32v10x/system_ch32v10x.c b/hw/bsp/ch32v10x/system_ch32v10x.c new file mode 100644 index 000000000..b083b83b4 --- /dev/null +++ b/hw/bsp/ch32v10x/system_ch32v10x.c @@ -0,0 +1,600 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v10x.c + * Author : WCH + * Version : V1.0.0 + * Date : 2020/04/30 + * Description : CH32V10x Device Peripheral Access Layer System Source File. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v10x.h" + +/* + * Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after + * reset the HSI is used as SYSCLK source). + * If none of the define below is enabled, the HSI is used as System clock source. + */ +//#define SYSCLK_FREQ_HSE HSE_VALUE +//#define SYSCLK_FREQ_48MHz_HSE 48000000 +//#define SYSCLK_FREQ_56MHz_HSE 56000000 +#define SYSCLK_FREQ_72MHz_HSE 72000000 +//#define SYSCLK_FREQ_HSI HSI_VALUE +//#define SYSCLK_FREQ_48MHz_HSI 48000000 +//#define SYSCLK_FREQ_56MHz_HSI 56000000 +//#define SYSCLK_FREQ_72MHz_HSI 72000000 + +/* Clock Definitions */ +#ifdef SYSCLK_FREQ_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */ +#else +uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */ + +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/* ch32v10x_system_private_function_proto_types */ +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE +static void SetSysClockToHSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSE +static void SetSysClockTo48_HSE( void ); +#elif defined SYSCLK_FREQ_56MHz_HSE +static void SetSysClockTo56_HSE( void ); +#elif defined SYSCLK_FREQ_72MHz_HSE +static void SetSysClockTo72_HSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSI +static void SetSysClockTo48_HSI( void ); +#elif defined SYSCLK_FREQ_56MHz_HSI +static void SetSysClockTo56_HSI( void ); +#elif defined SYSCLK_FREQ_72MHz_HSI +static void SetSysClockTo72_HSI( void ); + +#endif + +/********************************************************************* + * @fn SystemInit + * + * @brief Setup the microcontroller system Initialize the Embedded Flash Interface, + * the PLL and update the SystemCoreClock variable. + * + * @return none + */ +void SystemInit(void) +{ + RCC->CTLR |= (uint32_t)0x00000001; + RCC->CFGR0 &= (uint32_t)0xF8FF0000; + RCC->CTLR &= (uint32_t)0xFEF6FFFF; + RCC->CTLR &= (uint32_t)0xFFFBFFFF; + RCC->CFGR0 &= (uint32_t)0xFF80FFFF; + RCC->INTR = 0x009F0000; + SetSysClock(); +} + +/********************************************************************* + * @fn SystemCoreClockUpdate + * + * @brief Update SystemCoreClock variable according to Clock Register Values. + * + * @return none + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + + tmp = RCC->CFGR0 & RCC_SWS; + + switch(tmp) + { + case 0x00: + SystemCoreClock = HSI_VALUE; + break; + case 0x04: + SystemCoreClock = HSE_VALUE; + break; + case 0x08: + pllmull = RCC->CFGR0 & RCC_PLLMULL; + pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllmull = (pllmull >> 18) + 2; + if(pllsource == 0x00) + { + if( EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE ) + { + SystemCoreClock = ( HSI_VALUE ) * pllmull; + } + else + { + SystemCoreClock = ( HSI_VALUE >> 1 ) * pllmull; + } + } + else + { + if((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) + { + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + } + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; + SystemCoreClock >>= tmp; +} + +/********************************************************************* + * @fn SetSysClock + * + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClock(void) +{ + //GPIO_IPD_Unused(); +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_48MHz_HSE + SetSysClockTo48_HSE(); +#elif defined SYSCLK_FREQ_56MHz_HSE + SetSysClockTo56_HSE(); +#elif defined SYSCLK_FREQ_72MHz_HSE + SetSysClockTo72_HSE(); +#elif defined SYSCLK_FREQ_48MHz_HSI + SetSysClockTo48_HSI(); +#elif defined SYSCLK_FREQ_56MHz_HSI + SetSysClockTo56_HSI(); +#elif defined SYSCLK_FREQ_72MHz_HSI + SetSysClockTo72_HSI(); + +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + * source (default after reset) + */ +} + +#ifdef SYSCLK_FREQ_HSE + +/********************************************************************* + * @fn SetSysClockToHSE + * + * @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + /* Flash 0 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_0; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) + { + } + } + else + { + /* If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + + +#elif defined SYSCLK_FREQ_48MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo48_HSE + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo56_HSE + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLMULL7); + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo72_HSE + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLMULL9); + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo48_HSI + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo56_HSI + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 7 = 56 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo72_HSI + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#endif diff --git a/hw/bsp/ch32v10x/system_ch32v10x.h b/hw/bsp/ch32v10x/system_ch32v10x.h new file mode 100644 index 000000000..d15624520 --- /dev/null +++ b/hw/bsp/ch32v10x/system_ch32v10x.h @@ -0,0 +1,29 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v10x.h + * Author : WCH + * Version : V1.0.0 + * Date : 2020/04/30 + * Description : CH32V10x Device Peripheral Access Layer System Header File. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __SYSTEM_CH32V10x_H +#define __SYSTEM_CH32V10x_H + +#ifdef __cplusplus +extern "C" { +#endif + +extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ + +/* System_Exported_Functions */ +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /*__CH32V10x_SYSTEM_H */ diff --git a/hw/bsp/ch32v10x/wch-riscv.cfg b/hw/bsp/ch32v10x/wch-riscv.cfg new file mode 100644 index 000000000..aa35aa9c5 --- /dev/null +++ b/hw/bsp/ch32v10x/wch-riscv.cfg @@ -0,0 +1,17 @@ +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index daf3148f8..4485091dc 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -45,12 +45,12 @@ SRC_C += \ src/portable/wch/dcd_ch32_usbfs.c \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(SDK_SRC_DIR)/Core/core_riscv.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_gpio.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_misc.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_rcc.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_usart.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_rcc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_usart.c \ -SRC_S += $(SDK_SRC_DIR)/Startup/startup_ch32v20x_${MCU_VARIANT}.S +SRC_S += $(SDK_SRC_DIR)/Startup/startup_${CH32_FAMILY}_${MCU_VARIANT}.S INC += \ $(TOP)/$(BOARD_PATH) \ diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d9443f811..94d55f04a 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -443,7 +443,7 @@ function(family_flash_openocd TARGET) # note skip verify since it has issue with rp2040 add_custom_target(${TARGET}-openocd DEPENDS ${TARGET} - COMMAND ${OPENOCD} ${OPTION_LIST} -c "program $ reset" ${OPTION_LIST2} -c exit + COMMAND ${OPENOCD} ${OPTION_LIST} -c init -c halt -c "program $ reset" ${OPTION_LIST2} -c exit VERBATIM ) endfunction() diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index c66996c4f..d9d11e96d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -420,6 +420,15 @@ #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) +#elif TU_CHECK_MCU(OPT_MCU_CH32V103) + #define TUP_USBIP_WCH_USBFS + + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 1 + #endif + + #define TUP_DCD_ENDPOINT_MAX 8 + #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) // v20x support both FSDEV (USBD) and USBFS, default to FSDEV #define TUP_USBIP_WCH_USBFS diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h index ef6ebf2dc..68be64f5e 100644 --- a/src/portable/wch/ch32_usbfs_reg.h +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -35,15 +35,68 @@ #pragma GCC diagnostic ignored "-Wstrict-prototypes" #endif -#if CFG_TUSB_MCU == OPT_MCU_CH32V307 - #include - #define USBHD_IRQn OTG_FS_IRQn - +#if CFG_TUSB_MCU == OPT_MCU_CH32F20X + #include +#elif CFG_TUSB_MCU == OPT_MCU_CH32V103 + #include + typedef struct + { + __IO uint8_t BASE_CTRL; + __IO uint8_t UDEV_CTRL; + __IO uint8_t INT_EN; + __IO uint8_t DEV_ADDR; + __IO uint8_t Reserve0; + __IO uint8_t MIS_ST; + __IO uint8_t INT_FG; + __IO uint8_t INT_ST; + __IO uint32_t RX_LEN; + __IO uint8_t UEP4_1_MOD; + __IO uint8_t UEP2_3_MOD; + __IO uint8_t UEP5_6_MOD; + __IO uint8_t UEP7_MOD; + __IO uint32_t UEP0_DMA; + __IO uint32_t UEP1_DMA; + __IO uint32_t UEP2_DMA; + __IO uint32_t UEP3_DMA; + __IO uint32_t UEP4_DMA; + __IO uint32_t UEP5_DMA; + __IO uint32_t UEP6_DMA; + __IO uint32_t UEP7_DMA; + __IO uint16_t UEP0_TX_LEN; + __IO uint8_t UEP0_TX_CTRL; + __IO uint8_t UEP0_RX_CTRL; + __IO uint16_t UEP1_TX_LEN; + __IO uint8_t UEP1_TX_CTRL; + __IO uint8_t UEP1_RX_CTRL; + __IO uint16_t UEP2_TX_LEN; + __IO uint8_t UEP2_TX_CTRL; + __IO uint8_t UEP2_RX_CTRL; + __IO uint16_t UEP3_TX_LEN; + __IO uint8_t UEP3_TX_CTRL; + __IO uint8_t UEP3_RX_CTRL; + __IO uint16_t UEP4_TX_LEN; + __IO uint8_t UEP4_TX_CTRL; + __IO uint8_t UEP4_RX_CTRL; + __IO uint16_t UEP5_TX_LEN; + __IO uint8_t UEP5_TX_CTRL; + __IO uint8_t UEP5_RX_CTRL; + __IO uint16_t UEP6_TX_LEN; + __IO uint8_t UEP6_TX_CTRL; + __IO uint8_t UEP6_RX_CTRL; + __IO uint16_t UEP7_TX_LEN; + __IO uint8_t UEP7_TX_CTRL; + __IO uint8_t UEP7_RX_CTRL; + __IO uint32_t Reserve1; + __IO uint32_t OTG_CR; + __IO uint32_t OTG_SR; + } USBOTG_FS_TypeDef; + + #define USBOTG_FS ((USBOTG_FS_TypeDef *) 0x40023400) #elif CFG_TUSB_MCU == OPT_MCU_CH32V20X #include - -#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X - #include +#elif CFG_TUSB_MCU == OPT_MCU_CH32V307 + #include + #define USBHD_IRQn OTG_FS_IRQn #endif #ifdef __GNUC__ diff --git a/src/tusb_option.h b/src/tusb_option.h index db8b94580..1ca09e902 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_OPTION_H_ -#define _TUSB_OPTION_H_ +#ifndef TUSB_OPTION_H_ +#define TUSB_OPTION_H_ #include "common/tusb_compiler.h" @@ -182,7 +182,7 @@ #define OPT_MCU_CH32V307 2200 ///< WCH CH32V307 #define OPT_MCU_CH32F20X 2210 ///< WCH CH32F20x #define OPT_MCU_CH32V20X 2220 ///< WCH CH32V20X - +#define OPT_MCU_CH32V103 2230 ///< WCH CH32V103 // NXP LPC MCX #define OPT_MCU_MCXN9 2300 ///< NXP MCX N9 Series diff --git a/tools/get_deps.py b/tools/get_deps.py index 50cc5c893..92bfb86a2 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -168,6 +168,9 @@ deps_optional = { 'hw/mcu/ti': ['https://github.com/hathach/ti_driver.git', '143ed6cc20a7615d042b03b21e070197d473e6e5', 'msp430 msp432e4 tm4c'], + 'hw/mcu/wch/ch32v103': ['https://github.com/openwch/ch32v103.git', + '7578cae0b21f86dd053a1f781b2fc6ab99d0ec17', + 'ch32v10x'], 'hw/mcu/wch/ch32v20x': ['https://github.com/openwch/ch32v20x.git', 'de6d68c654340d7f27b00cebbfc9aa2740a1abc2', 'ch32v20x'], -- cgit v1.3.1 From 4ce1cce40a01dce56cab2c73745f4f2c9d212b25 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 12 Jul 2024 20:17:14 +0700 Subject: simplify dwc2 test mode - all dwc2 ip seems to support test mode in both fs/hs -> remove TUP_USBIP_DWC2_TEST_MODE - remove dcd_check_test_mode_support(), all should be supported - move enum tusb_feature_test_mode_t to tusb_types.h --- src/common/tusb_mcu.h | 3 -- src/common/tusb_types.h | 9 ++++++ src/device/dcd.h | 13 +------- src/device/usbd.c | 56 +++++++++++------------------------ src/portable/synopsys/dwc2/dcd_dwc2.c | 20 +++---------- src/tusb_option.h | 2 +- 6 files changed, 32 insertions(+), 71 deletions(-) (limited to 'src/common') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 80826c895..637281bfc 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -195,7 +195,6 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_USBIP_DWC2_TEST_MODE // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9 #define TUP_DCD_ENDPOINT_MAX 6 @@ -210,7 +209,6 @@ // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS - #define TUP_USBIP_DWC2_TEST_MODE #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H7) @@ -285,7 +283,6 @@ defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) #define TUP_DCD_ENDPOINT_MAX 9 #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_USBIP_DWC2_TEST_MODE #else #define TUP_DCD_ENDPOINT_MAX 6 #endif diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index b571f9b72..1501a5af6 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -214,6 +214,15 @@ enum { #define TUSB_DESC_CONFIG_POWER_MA(x) ((x)/2) +// USB 2.0 Spec Table 9-7: Test Mode Selectors +typedef enum { + TUSB_FEATURE_TEST_J = 1, + TUSB_FEATURE_TEST_K, + TUSB_FEATURE_TEST_SE0_NAK, + TUSB_FEATURE_TEST_PACKET, + TUSB_FEATURE_TEST_FORCE_ENABLE, +} tusb_feature_test_mode_t; + //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ diff --git a/src/device/dcd.h b/src/device/dcd.h index f6735b077..5356e9be1 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -89,14 +89,6 @@ typedef struct TU_ATTR_ALIGNED(4) { }; } dcd_event_t; -typedef enum { - TEST_J = 1, - TEST_K, - TEST_SE0_NAK, - TEST_PACKET, - TEST_FORCE_ENABLE, -} test_mode_t; - //TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct"); //--------------------------------------------------------------------+ @@ -150,11 +142,8 @@ void dcd_disconnect(uint8_t rhport); void dcd_sof_enable(uint8_t rhport, bool en); #if CFG_TUD_TEST_MODE -// Check if the test mode is supported, returns true is test mode selector is supported -bool dcd_check_test_mode_support(test_mode_t test_selector) TU_ATTR_WEAK; - // Put device into a test mode (needs power cycle to quit) -void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) TU_ATTR_WEAK; +void dcd_enter_test_mode(uint8_t rhport, tusb_feature_test_mode_t test_selector); #endif //--------------------------------------------------------------------+ // Endpoint API diff --git a/src/device/usbd.c b/src/device/usbd.c index 800d9c824..4105a71a4 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -321,9 +321,17 @@ TU_ATTR_ALWAYS_INLINE static inline bool queue_event(dcd_event_t const * event, static bool process_control_request(uint8_t rhport, tusb_control_request_t const * p_request); static bool process_set_config(uint8_t rhport, uint8_t cfg_num); static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const * p_request); + #if CFG_TUD_TEST_MODE -static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); +static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) { + TU_VERIFY(CONTROL_STAGE_ACK == stage); + uint8_t const selector = tu_u16_high(request->wIndex); + TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); + dcd_enter_test_mode(rhport, (tusb_feature_test_mode_t) selector); + return true; +} #endif + // from usbd_control.c void usbd_control_reset(void); void usbd_control_set_request(tusb_control_request_t const *request); @@ -695,7 +703,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const } if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { - // Non standard request is not supported + // Non-standard request is not supported TU_BREAKPOINT(); return false; } @@ -759,43 +767,27 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; case TUSB_REQ_SET_FEATURE: - // Handle the feature selector - switch(p_request->wValue) - { - // Support for remote wakeup + switch(p_request->wValue) { case TUSB_REQ_FEATURE_REMOTE_WAKEUP: TU_LOG_USBD(" Enable Remote Wakeup\r\n"); - // Host may enable remote wake up before suspending especially HID device _usbd_dev.remote_wakeup_en = true; tud_control_status(rhport, p_request); break; -#if CFG_TUD_TEST_MODE - // Support for TEST_MODE + #if CFG_TUD_TEST_MODE case TUSB_REQ_FEATURE_TEST_MODE: { // Only handle the test mode if supported and valid - TU_VERIFY(dcd_enter_test_mode && dcd_check_test_mode_support && 0 == tu_u16_low(p_request->wIndex)); - - uint8_t selector = tu_u16_high(p_request->wIndex); - - // Stall request if the selected test mode isn't supported - if (!dcd_check_test_mode_support((test_mode_t)selector)) - { - TU_LOG_USBD(" Unsupported Test Mode (test selector index: %d)\r\n", selector); + TU_VERIFY(0 == tu_u16_low(p_request->wIndex)); - return false; - } - - // Acknowledge request - tud_control_status(rhport, p_request); - - TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); + uint8_t const selector = tu_u16_high(p_request->wIndex); + TU_VERIFY(TUSB_FEATURE_TEST_J <= selector && selector <= TUSB_FEATURE_TEST_FORCE_ENABLE); usbd_control_set_complete_callback(process_test_mode_cb); + tud_control_status(rhport, p_request); break; } -#endif /* CFG_TUD_TEST_MODE */ + #endif /* CFG_TUD_TEST_MODE */ // Stall unsupported feature selector default: return false; @@ -1127,20 +1119,6 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } } -#if CFG_TUD_TEST_MODE -static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) -{ - // At this point it should already be ensured that dcd_enter_test_mode() is defined - - // Only enter the test mode after the request for it has completed - TU_VERIFY(CONTROL_STAGE_ACK == stage); - - dcd_enter_test_mode(rhport, (test_mode_t)tu_u16_high(request->wIndex)); - - return true; -} -#endif /* CFG_TUD_TEST_MODE */ - //--------------------------------------------------------------------+ // DCD Event Handler //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index dbcd586c5..9a38b46dc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1195,25 +1195,13 @@ void dcd_int_handler(uint8_t rhport) { // } } -#if defined(TUP_USBIP_DWC2_TEST_MODE) && CFG_TUD_TEST_MODE - -bool dcd_check_test_mode_support(test_mode_t test_selector) { - // Check if test mode selector is unsupported - if (TEST_FORCE_ENABLE < test_selector || TEST_J > test_selector) { - return false; - } - - return true; -} - -void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { - // Get port address... +#if CFG_TUD_TEST_MODE +void dcd_enter_test_mode(uint8_t rhport, tusb_feature_test_mode_t test_selector) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Enable the test mode - dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (test_selector << DCTL_TCTL_Pos); + dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (((uint8_t) test_selector) << DCTL_TCTL_Pos); } - -#endif /* TUP_USBIP_DWC2_TEST_MODE && CFG_TUD_TEST_MODE */ +#endif #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 8990cf92b..f2cc284dc 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -381,7 +381,7 @@ #error "CFG_TUD_ENDPPOINT_MAX must be less than or equal to TUP_DCD_ENDPOINT_MAX" #endif -// USB 2.0 compliance test mode support +// USB 2.0 7.1.20: compliance test mode support #ifndef CFG_TUD_TEST_MODE #define CFG_TUD_TEST_MODE 0 #endif -- cgit v1.3.1 From 6fb6602a097b2d2e026f150d6fde387803606f88 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 19 Jul 2024 18:08:04 +0700 Subject: - add tud_cdc_n_ready() though not used - usbd now change _usbd_dev.cfg_num before calling driver's open() --- src/class/cdc/cdc_device.c | 16 ++++++++++------ src/class/cdc/cdc_device.h | 8 ++++++++ src/common/tusb_verify.h | 10 +++++----- src/device/usbd.c | 10 ++++++++-- 4 files changed, 31 insertions(+), 13 deletions(-) (limited to 'src/common') diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 570c825ab..ebc408f5a 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -81,11 +81,11 @@ typedef struct { CFG_TUD_MEM_SECTION static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; static tud_cdc_configure_fifo_t _cdcd_fifo_cfg; -static bool _prep_out_transaction (cdcd_interface_t* p_cdc, bool itf_open) { +static bool _prep_out_transaction (cdcd_interface_t* p_cdc) { uint8_t const rhport = 0; // Skip if usb is not ready yet - TU_VERIFY(tud_ready() || itf_open); + TU_VERIFY(tud_ready() && p_cdc->ep_out); uint16_t available = tu_fifo_remaining(&p_cdc->rx_ff); @@ -120,6 +120,10 @@ bool tud_cdc_configure_fifo(tud_cdc_configure_fifo_t const* cfg) { return true; } +bool tud_cdc_n_ready(uint8_t itf) { + return tud_ready() && _cdcd_itf[itf].ep_in != 0 && _cdcd_itf[itf].ep_out != 0; +} + bool tud_cdc_n_connected(uint8_t itf) { // DTR (bit 0) active is considered as connected return tud_ready() && tu_bit_test(_cdcd_itf[itf].line_state, 0); @@ -147,7 +151,7 @@ uint32_t tud_cdc_n_available(uint8_t itf) { uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); - _prep_out_transaction(p_cdc, false); + _prep_out_transaction(p_cdc); return num_read; } @@ -158,7 +162,7 @@ bool tud_cdc_n_peek(uint8_t itf, uint8_t* chr) { void tud_cdc_n_read_flush(uint8_t itf) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; tu_fifo_clear(&p_cdc->rx_ff); - _prep_out_transaction(p_cdc, false); + _prep_out_transaction(p_cdc); } //--------------------------------------------------------------------+ @@ -340,7 +344,7 @@ uint16_t cdcd_open(uint8_t rhport, tusb_desc_interface_t const * itf_desc, uint1 } // Prepare for incoming data - _prep_out_transaction(p_cdc, true); + _prep_out_transaction(p_cdc); return drv_len; } @@ -449,7 +453,7 @@ bool cdcd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_ if (tud_cdc_rx_cb && !tu_fifo_empty(&p_cdc->rx_ff)) tud_cdc_rx_cb(itf); // prepare for OUT transaction - _prep_out_transaction(p_cdc, false); + _prep_out_transaction(p_cdc); } // Data sent to host, we continue to fetch from tx fifo to send. diff --git a/src/class/cdc/cdc_device.h b/src/class/cdc/cdc_device.h index 34670517a..3ad7c8baf 100644 --- a/src/class/cdc/cdc_device.h +++ b/src/class/cdc/cdc_device.h @@ -61,6 +61,9 @@ bool tud_cdc_configure_fifo(tud_cdc_configure_fifo_t const* cfg); // Application API (Multiple Ports) i.e. CFG_TUD_CDC > 1 //--------------------------------------------------------------------+ +// Check if interface is ready +bool tud_cdc_n_ready(uint8_t itf); + // Check if terminal is connected to this port bool tud_cdc_n_connected(uint8_t itf); @@ -116,6 +119,11 @@ bool tud_cdc_n_write_clear(uint8_t itf); //--------------------------------------------------------------------+ // Application API (Single Port) //--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline bool tud_cdc_ready(void) { + return tud_cdc_n_ready(0); +} + TU_ATTR_ALWAYS_INLINE static inline bool tud_cdc_connected(void) { return tud_cdc_n_connected(0); } diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index dde0550d3..4344575b7 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -56,8 +56,8 @@ * #define TU_VERIFY(cond) if(cond) return false; * #define TU_VERIFY(cond,ret) if(cond) return ret; * - * #define TU_ASSERT(cond) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return false;} - * #define TU_ASSERT(cond,ret) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return ret;} + * #define TU_ASSERT(cond) if(cond) {TU_MESS_FAILED(); TU_BREAKPOINT(), return false;} + * #define TU_ASSERT(cond,ret) if(cond) {TU_MESS_FAILED(); TU_BREAKPOINT(), return ret;} *------------------------------------------------------------------*/ #ifdef __cplusplus @@ -70,9 +70,9 @@ #if CFG_TUSB_DEBUG #include - #define _MESS_FAILED() tu_printf("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) + #define TU_MESS_FAILED() tu_printf("%s %d: ASSERT FAILED\r\n", __func__, __LINE__) #else - #define _MESS_FAILED() do {} while (0) + #define TU_MESS_FAILED() do {} while (0) #endif // Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7, M33. M55 @@ -119,7 +119,7 @@ *------------------------------------------------------------------*/ #define TU_ASSERT_DEFINE(_cond, _ret) \ do { \ - if ( !(_cond) ) { _MESS_FAILED(); TU_BREAKPOINT(); return _ret; } \ + if ( !(_cond) ) { TU_MESS_FAILED(); TU_BREAKPOINT(); return _ret; } \ } while(0) #define TU_ASSERT_1ARGS(_cond) TU_ASSERT_DEFINE(_cond, false) diff --git a/src/device/usbd.c b/src/device/usbd.c index 4105a71a4..4e723c8b9 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -747,17 +747,23 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const _usbd_dev.speed = speed; // restore speed } + _usbd_dev.cfg_num = cfg_num; + // Handle the new configuration and execute the corresponding callback if ( cfg_num ) { // switch to new configuration if not zero - TU_ASSERT( process_set_config(rhport, cfg_num) ); + if (!process_set_config(rhport, cfg_num)) { + TU_MESS_FAILED(); + TU_BREAKPOINT(); + _usbd_dev.cfg_num = 0; + return false; + } if ( tud_mount_cb ) tud_mount_cb(); } else { if ( tud_umount_cb ) tud_umount_cb(); } } - _usbd_dev.cfg_num = cfg_num; tud_control_status(rhport, p_request); } break; -- cgit v1.3.1