From a5bc0430f75c4e2088690467b369db7e24bba97b Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Jul 2024 16:49:01 +0700 Subject: fix race condition where reset event cleaar setup count --- src/device/dcd.h | 22 +++++++++------------- src/device/usbd.c | 11 +++++++---- 2 files changed, 16 insertions(+), 17 deletions(-) (limited to 'src/device') diff --git a/src/device/dcd.h b/src/device/dcd.h index 5356e9be1..b25b47025 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -40,19 +40,15 @@ //--------------------------------------------------------------------+ typedef enum { - DCD_EVENT_INVALID = 0, - DCD_EVENT_BUS_RESET, - DCD_EVENT_UNPLUGGED, - DCD_EVENT_SOF, - DCD_EVENT_SUSPEND, // TODO LPM Sleep L1 support - DCD_EVENT_RESUME, - - DCD_EVENT_SETUP_RECEIVED, - DCD_EVENT_XFER_COMPLETE, - - // Not an DCD event, just a convenient way to defer ISR function - USBD_EVENT_FUNC_CALL, - + DCD_EVENT_INVALID = 0, // 0 + DCD_EVENT_BUS_RESET, // 1 + DCD_EVENT_UNPLUGGED, // 2 + DCD_EVENT_SOF, // 3 + DCD_EVENT_SUSPEND, // 4 TODO LPM Sleep L1 support + DCD_EVENT_RESUME, // 5 + DCD_EVENT_SETUP_RECEIVED, // 6 + DCD_EVENT_XFER_COMPLETE, // 7 + USBD_EVENT_FUNC_CALL, // 8 Not an DCD event, just a convenient way to defer ISR function DCD_EVENT_COUNT } dcd_eventid_t; diff --git a/src/device/usbd.c b/src/device/usbd.c index b93216006..d9b20d26d 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -120,7 +120,6 @@ typedef struct { }; volatile uint8_t cfg_num; // current active configuration (0x00 is not configured) uint8_t speed; - volatile uint8_t setup_count; volatile uint8_t sof_consumer; uint8_t itf2drv[CFG_TUD_INTERFACE_MAX]; // map interface number to driver (0xff is invalid) @@ -131,6 +130,7 @@ typedef struct { }usbd_device_t; tu_static usbd_device_t _usbd_dev; +static volatile uint8_t _usbd_queued_setup; //--------------------------------------------------------------------+ // Class Driver @@ -459,6 +459,7 @@ bool tud_init(uint8_t rhport) { TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_edpt_stream_t)); tu_varclr(&_usbd_dev); + _usbd_queued_setup = 0; #if OSAL_MUTEX_REQUIRED // Init device mutex @@ -594,9 +595,10 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { break; case DCD_EVENT_SETUP_RECEIVED: - _usbd_dev.setup_count--; + TU_ASSERT(_usbd_queued_setup > 0,); + _usbd_queued_setup--; TU_LOG_BUF(CFG_TUD_LOG_LEVEL, &event.setup_received, 8); - if (_usbd_dev.setup_count) { + if (_usbd_queued_setup) { TU_LOG_USBD(" Skipped since there is other SETUP in queue\r\n"); break; } @@ -1199,7 +1201,8 @@ TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const* event, bool in_isr) break; case DCD_EVENT_SETUP_RECEIVED: - _usbd_dev.setup_count++; + // TU_ASSERT(event->setup_received.bRequest != 0,); + _usbd_queued_setup++; send = true; break; -- cgit v1.3.1 From f4aaad6869db74a4fba6eeb716d20be85978a311 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Jul 2024 21:35:24 +0700 Subject: add edpt0_open(), slightly update dtog --- src/device/dcd.h | 2 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 74 +++++++++++++++------------ src/portable/st/stm32_fsdev/fsdev_common.h | 30 +++++++---- src/portable/st/stm32_fsdev/fsdev_stm32.h | 8 --- 4 files changed, 62 insertions(+), 52 deletions(-) (limited to 'src/device') diff --git a/src/device/dcd.h b/src/device/dcd.h index b25b47025..41e0fbee3 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -180,7 +180,7 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr); TU_ATTR_WEAK bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size); // Configure and enable an ISO endpoint according to descriptor -TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc); +TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); //--------------------------------------------------------------------+ // Event API (implemented by stack) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 6007b4a02..834de6998 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -178,6 +178,8 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); +TU_ATTR_UNUSED static void edpt0_open(uint8_t rhport); + //--------------------------------------------------------------------+ // Inline helper //--------------------------------------------------------------------+ @@ -277,19 +279,7 @@ static void handle_bus_reset(uint8_t rhport) { // Reset PMA allocation ep_buf_ptr = FSDEV_BTABLE_BASE + 8 * FSDEV_EP_COUNT; - tusb_desc_endpoint_t ep0_desc = { - .bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, - .bEndpointAddress = 0x00, - .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0 - }; - - dcd_edpt_open(rhport, &ep0_desc); - - ep0_desc.bEndpointAddress = 0x80; - dcd_edpt_open(rhport, &ep0_desc); + edpt0_open(rhport); // open control endpoint (both IN & OUT) USB->DADDR = USB_DADDR_EF; // Enable USB Function } @@ -610,8 +600,32 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) TU_ASSERT(0); } -// The STM32F0 doesn't seem to like |= or &= to manipulate the EP#R registers, -// so I'm using the #define from HAL here, instead. +void edpt0_open(uint8_t rhport) { + (void) rhport; + + dcd_ep_alloc(0x0, TUSB_XFER_CONTROL); + dcd_ep_alloc(0x80, TUSB_XFER_CONTROL); + + xfer_status[0][0].max_packet_size = CFG_TUD_ENDPOINT0_SIZE; + xfer_status[0][0].ep_idx = 0; + + xfer_status[0][1].max_packet_size = CFG_TUD_ENDPOINT0_SIZE; + xfer_status[0][1].ep_idx = 0; + + uint16_t pma_addr0 = dcd_pma_alloc(CFG_TUD_ENDPOINT0_SIZE, false); + uint16_t pma_addr1 = dcd_pma_alloc(CFG_TUD_ENDPOINT0_SIZE, false); + + btable_set_addr(0, BTABLE_BUF_RX, pma_addr0); + btable_set_addr(0, BTABLE_BUF_TX, pma_addr1); + + uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; + ep_reg |= USB_EP_CONTROL | USB_EP_CTR_RX | USB_EP_CTR_TX; + ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); + // no need to explicitly set DTOG bits since we aren't masked DTOG bit + + pcd_set_endpoint(USB, 0, ep_reg); +} bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; @@ -626,9 +640,6 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { // Set type switch (desc_ep->bmAttributes.xfer) { - case TUSB_XFER_CONTROL: - ep_reg |= USB_EP_CONTROL; - break; case TUSB_XFER_BULK: ep_reg |= USB_EP_CONTROL; // FIXME should it be bulk? break; @@ -718,35 +729,34 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet btable_set_addr(ep_idx, 0, pma_addr); btable_set_addr(ep_idx, 1, pma_addr2); - pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; + pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); + return true; } -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) -{ +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; - uint8_t const ep_addr = p_endpoint_desc->bEndpointAddress; + uint8_t const ep_addr = desc_ep->bEndpointAddress; uint8_t const ep_idx = xfer_ctl_ptr(ep_addr)->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_ptr(ep_addr)->max_packet_size = tu_edpt_packet_size(p_endpoint_desc); - - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); + xfer_ctl_ptr(ep_addr)->max_packet_size = tu_edpt_packet_size(desc_ep); - pcd_set_ep_address(USB, ep_idx, tu_edpt_number(ep_addr)); - - pcd_clear_tx_dtog(USB, ep_idx); - pcd_clear_rx_dtog(USB, ep_idx); + uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; + ep_reg |= tu_edpt_number(ep_addr) | USB_EP_ISOCHRONOUS | USB_EP_CTR_RX | USB_EP_CTR_TX; + ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_DIS); + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_DIS); + // no need to explicitly set DTOG bits since we aren't masked DTOG bit if (dir == TUSB_DIR_IN) { - pcd_rx_dtog(USB, ep_idx); + ep_reg = ep_add_rx_dtog(ep_reg, 1); } else { - pcd_tx_dtog(USB, ep_idx); + ep_reg = ep_add_tx_dtog(ep_reg, 1); } + pcd_set_endpoint(USB, ep_idx, ep_reg); return true; } diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 3d1e1fe4a..53b2af0a2 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -112,14 +112,6 @@ static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; #endif typedef struct { -// _va32 fsdev_bus_t EP0R; // 00: USB Endpoint 0 register -// _va32 fsdev_bus_t EP1R; // 04: USB Endpoint 1 register -// _va32 fsdev_bus_t EP2R; // 08: USB Endpoint 2 register -// _va32 fsdev_bus_t EP3R; // 0C: USB Endpoint 3 register -// _va32 fsdev_bus_t EP4R; // 10: USB Endpoint 4 register -// _va32 fsdev_bus_t EP5R; // 14: USB Endpoint 5 register -// _va32 fsdev_bus_t EP6R; // 18: USB Endpoint 6 register -// _va32 fsdev_bus_t EP7R; // 1C: USB Endpoint 7 register struct { _va32 fsdev_bus_t reg; }ep[FSDEV_EP_COUNT]; @@ -140,6 +132,22 @@ TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); #define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) +#ifndef USB_EPTX_STAT +#define USB_EPTX_STAT 0x0030U +#endif + +#ifndef USB_EPRX_STAT +#define USB_EPRX_STAT 0x3000U +#endif + +#ifndef USB_EP_DTOG_TX_Pos +#define USB_EP_DTOG_TX_Pos (6U) +#endif + +#ifndef USB_EP_DTOG_RX_Pos +#define USB_EP_DTOG_RX_Pos (14U) +#endif + //--------------------------------------------------------------------+ // BTable //--------------------------------------------------------------------+ @@ -244,7 +252,7 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, regVal &= USB_EPREG_MASK; regVal |= bAddr; regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx,regVal); + pcd_set_endpoint(USBx, bEpIdx, regVal); } TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { @@ -291,11 +299,11 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_status(uint32_t reg, uint } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_dtog(uint32_t reg, uint32_t state) { - return reg | ((reg ^ state) & USB_EP_DTOG_TX); + return reg | ((reg ^ (state << USB_EP_DTOG_TX_Pos)) & USB_EP_DTOG_TX); } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_dtog(uint32_t reg, uint32_t state) { - return reg | ((reg ^ state) & USB_EP_DTOG_RX); + return reg | ((reg ^ (state << USB_EP_DTOG_RX_Pos)) & USB_EP_DTOG_RX); } /** diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index f89882e0d..f20505f28 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -202,14 +202,6 @@ #error "FSDEV_REG_BASE not defined" #endif -#ifndef USB_EPTX_STAT -#define USB_EPTX_STAT 0x0030U -#endif - -#ifndef USB_EPRX_STAT -#define USB_EPRX_STAT 0x3000U -#endif - // This checks if the device has "LPM" #if defined(USB_ISTR_L1REQ) #define USB_ISTR_L1REQ_FORCED (USB_ISTR_L1REQ) -- cgit v1.3.1