From 1587d48e89cbaa8d0d1c870809bc40c3c8d1056f Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 11 Oct 2024 17:53:39 +0700 Subject: hcd_init() take init struct --- src/host/hcd.h | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) (limited to 'src/host/hcd.h') diff --git a/src/host/hcd.h b/src/host/hcd.h index 5547c7cc5..97cb01754 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -53,26 +53,21 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -typedef enum -{ +typedef enum { HCD_EVENT_DEVICE_ATTACH, HCD_EVENT_DEVICE_REMOVE, HCD_EVENT_XFER_COMPLETE, - // Not an HCD event, just a convenient way to defer ISR function - USBH_EVENT_FUNC_CALL, - + USBH_EVENT_FUNC_CALL, // Not an HCD event HCD_EVENT_COUNT } hcd_eventid_t; -typedef struct -{ +typedef struct { uint8_t rhport; uint8_t event_id; uint8_t dev_addr; - union - { + union { // Attach, Remove struct { uint8_t hub_addr; @@ -93,11 +88,9 @@ typedef struct void* param; }func_call; }; - } hcd_event_t; -typedef struct -{ +typedef struct { uint8_t rhport; uint8_t hub_addr; uint8_t hub_port; @@ -128,7 +121,7 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Initialize controller to host mode -bool hcd_init(uint8_t rhport); +bool hcd_init(const tusb_rhport_init_t* rh_init); // De-initialize controller bool hcd_deinit(uint8_t rhport); -- cgit v1.3.1 From 1f18be93db39dbc57bbf34f982dbe07e209a2ae3 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 14 Oct 2024 18:27:52 +0700 Subject: change the tusb_rhport_init_t struct, exclude the rhport to make API more consistent --- .github/workflows/pre-commit.yml | 2 +- .idea/cmake.xml | 13 +++++++------ examples/device/audio_4_channel_mic/src/main.c | 3 +-- .../device/audio_4_channel_mic_freertos/src/main.c | 3 +-- examples/device/audio_test/src/main.c | 3 +-- examples/device/audio_test_freertos/src/main.c | 3 +-- examples/device/audio_test_multi_rate/src/main.c | 3 +-- examples/device/cdc_dual_ports/src/main.c | 3 +-- examples/device/cdc_msc/src/main.c | 3 +-- examples/device/cdc_msc_freertos/src/main.c | 3 +-- examples/device/cdc_uac2/src/main.c | 3 +-- examples/device/dfu/src/main.c | 3 +-- examples/device/dfu_runtime/src/main.c | 3 +-- examples/device/dynamic_configuration/src/main.c | 3 +-- examples/device/hid_boot_interface/src/main.c | 3 +-- examples/device/hid_composite/src/main.c | 3 +-- examples/device/hid_composite_freertos/src/main.c | 3 +-- examples/device/hid_generic_inout/src/main.c | 3 +-- examples/device/hid_multiple_interface/src/main.c | 3 +-- examples/device/midi_test/src/main.c | 3 +-- examples/device/msc_dual_lun/src/main.c | 3 +-- examples/device/net_lwip_webserver/src/main.c | 3 +-- examples/device/uac2_headset/src/main.c | 3 +-- examples/device/uac2_speaker_fb/src/main.c | 3 +-- examples/device/usbtmc/src/main.c | 3 +-- examples/device/video_capture/src/main.c | 6 ++---- examples/device/video_capture_2ch/src/main.c | 6 ++---- examples/device/webusb_serial/src/main.c | 3 +-- examples/dual/host_hid_to_device_cdc/src/main.c | 6 ++---- examples/dual/host_info_to_device_cdc/src/main.c | 6 ++---- examples/host/bare_api/src/main.c | 3 +-- examples/host/cdc_msc_hid/src/main.c | 3 +-- examples/host/cdc_msc_hid_freertos/src/main.c | 3 +-- examples/host/device_info/src/main.c | 3 +-- examples/host/hid_controller/src/main.c | 3 +-- examples/host/msc_file_explorer/src/main.c | 3 +-- src/class/video/video_device.c | 2 +- src/common/tusb_types.h | 1 - src/device/dcd.h | 2 +- src/device/usbd.c | 8 ++++---- src/device/usbd.h | 7 +++---- src/host/hcd.h | 2 +- src/host/usbh.c | 10 +++++----- src/host/usbh.h | 7 +++---- src/portable/analog/max3421/hcd_max3421.c | 4 ++-- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 4 ++-- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 4 ++-- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 4 ++-- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 8 +++++--- src/portable/dialog/da146xx/dcd_da146xx.c | 4 ++-- src/portable/espressif/esp32sx/dcd_esp32sx.c | 4 ++-- src/portable/mentor/musb/dcd_musb.c | 4 ++-- src/portable/mentor/musb/hcd_musb.c | 3 ++- src/portable/microchip/pic/dcd_pic.c | 4 ++-- src/portable/microchip/pic32mz/dcd_pic32mz.c | 4 ++-- src/portable/microchip/samd/dcd_samd.c | 4 ++-- src/portable/microchip/samg/dcd_samg.c | 5 +++-- src/portable/microchip/samx7x/dcd_samx7x.c | 4 ++-- src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c | 4 ++-- src/portable/nordic/nrf5x/dcd_nrf5x.c | 6 +++--- src/portable/nuvoton/nuc120/dcd_nuc120.c | 4 ++-- src/portable/nuvoton/nuc121/dcd_nuc121.c | 4 ++-- src/portable/nuvoton/nuc505/dcd_nuc505.c | 4 ++-- src/portable/nxp/khci/dcd_khci.c | 4 ++-- src/portable/nxp/khci/hcd_khci.c | 3 ++- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 4 ++-- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 4 ++-- src/portable/ohci/ohci.c | 4 ++-- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 3 ++- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 3 ++- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 4 ++-- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 3 ++- src/portable/renesas/rusb2/dcd_rusb2.c | 4 ++-- src/portable/renesas/rusb2/hcd_rusb2.c | 4 ++-- src/portable/sony/cxd56/dcd_cxd56.c | 4 ++-- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 4 ++-- src/portable/sunxi/dcd_sunxi_musb.c | 4 ++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 ++-- src/portable/template/dcd_template.c | 4 ++-- src/portable/template/hcd_template.c | 3 ++- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 7 +++---- src/portable/valentyusb/eptri/dcd_eptri.c | 4 ++-- src/portable/wch/dcd_ch32_usbfs.c | 4 ++-- src/portable/wch/dcd_ch32_usbhs.c | 4 ++-- src/tusb.c | 16 +++++++--------- src/tusb.h | 11 ++++++----- test/fuzz/dcd_fuzz.cc | 3 ++- test/unit-test/test/device/msc/test_msc_device.c | 5 ++--- test/unit-test/test/device/usbd/test_usbd.c | 20 +++++++------------- 89 files changed, 174 insertions(+), 213 deletions(-) (limited to 'src/host/hcd.h') diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 379a22ee2..530484079 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -29,7 +29,7 @@ jobs: #ceedling test:all - name: Run pre-commit - uses: pre-commit/action@v3.0.0 + uses: pre-commit/action@v3.0.1 - name: Build Fuzzer run: | diff --git a/.idea/cmake.xml b/.idea/cmake.xml index c0b55a82e..05dceda5a 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,6 +2,9 @@ + + + @@ -80,7 +83,7 @@ - + @@ -94,11 +97,11 @@ - + - + @@ -109,9 +112,6 @@ - - - @@ -148,6 +148,7 @@ + \ No newline at end of file diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index ca0e67fae..e8c40309e 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -87,11 +87,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index c1ebc4899..2ac7516cd 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -210,11 +210,10 @@ void usb_device_task(void* param) // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index f4c1bf95f..018c48994 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -80,11 +80,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index b7d7dc042..4e2264b5d 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -157,11 +157,10 @@ void usb_device_task(void* param) // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index a1c4d32db..f9dcd1b8a 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -98,11 +98,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index b446bca0b..63ae8a8c9 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -53,11 +53,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 47ba5a887..f36c910d7 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -52,11 +52,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index a08e063ac..f70267e33 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -133,11 +133,10 @@ static void usb_device_task(void *param) { // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/cdc_uac2/src/main.c b/examples/device/cdc_uac2/src/main.c index 384d910ec..b148593da 100644 --- a/examples/device/cdc_uac2/src/main.c +++ b/examples/device/cdc_uac2/src/main.c @@ -47,11 +47,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); #if (CFG_TUSB_MCU == OPT_MCU_RP2040) stdio_init_all(); diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index f2aea7cfc..af9e99857 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -76,11 +76,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 5d6b907b7..4740c18c4 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -71,11 +71,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 143570c5c..32ff58232 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -58,11 +58,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index dfee7421d..570e4e801 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -58,11 +58,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 56c485982..5302af3b8 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -59,11 +59,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index fc07a1a39..ae091571e 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -137,11 +137,10 @@ void usb_device_task(void* param) // This should be called after scheduler/kernel is started. // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 1bbcbf7a4..73f51002d 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -82,11 +82,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index edcedd3ca..92c7e8332 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -63,11 +63,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index b05307d1b..d7849a2c4 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -64,11 +64,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index fe3896ca7..012095dca 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -55,11 +55,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 6041b56e2..8af7a9de6 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -217,11 +217,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 4d28f73a4..6b2ab0973 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -101,11 +101,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/uac2_speaker_fb/src/main.c b/examples/device/uac2_speaker_fb/src/main.c index 1250b041d..53bbec9b6 100644 --- a/examples/device/uac2_speaker_fb/src/main.c +++ b/examples/device/uac2_speaker_fb/src/main.c @@ -107,11 +107,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 2af581bc1..aa7902a15 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -56,11 +56,10 @@ int main(void) // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index c5d87c660..aeeeb8930 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -69,11 +69,10 @@ int main(void) { #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -325,11 +324,10 @@ void usb_device_task(void *param) { // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index a45e62ab0..dd6983766 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -69,11 +69,10 @@ int main(void) { #else // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); @@ -333,11 +332,10 @@ void usb_device_task(void *param) { // This should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 46215ec13..d189af91f 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -92,11 +92,10 @@ int main(void) { // init device stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 061958aae..633f7a6ac 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -80,18 +80,16 @@ int main(void) { // init device and host stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index e4d802a0c..668808db2 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -83,18 +83,16 @@ int main(void) { // init device and host stack on configured roothub port tusb_rhport_init_t dev_init = { - .rhport = BOARD_TUD_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - tusb_init(&dev_init); + tusb_init(BOARD_TUD_RHPORT, &dev_init); tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index e710e3caa..f582f4f5a 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -63,11 +63,10 @@ int main(void) // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 3a6e762b7..71257c0fe 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -51,11 +51,10 @@ int main(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 9d2f347c3..7fb84a40f 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -127,12 +127,11 @@ static void usb_host_task(void *param) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - if (!tusb_init(&host_init)) { + if (!tusb_init(BOARD_TUH_RHPORT, &host_init)) { printf("Failed to init USB Host Stack\r\n"); vTaskSuspend(NULL); } diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 8ca3d8a3a..0ff4f32e9 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -67,11 +67,10 @@ int main(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 6db47792c..ba12774bd 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -53,11 +53,10 @@ int main(void) // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 11512ab65..9509035b4 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -79,11 +79,10 @@ int main(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .rhport = BOARD_TUH_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUSB_SPEED_AUTO }; - tusb_init(&host_init); + tusb_init(BOARD_TUH_RHPORT, &host_init); if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index c544a09fe..70dbb5b9e 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -707,7 +707,7 @@ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t /* The first descriptor is a video control interface descriptor. */ uint8_t const *cur = _find_desc_itf(beg, end, _desc_itfnum(beg), altnum); - TU_LOG_DRV(" cur %d\r\n", cur - beg); + TU_LOG_DRV(" cur %" PRId32 "\r\n", (int32_t) (cur - beg)); TU_VERIFY(cur < end); tusb_desc_vc_itf_t const *vc = (tusb_desc_vc_itf_t const *)cur; diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index 5dfe3ff98..53bb367cb 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -278,7 +278,6 @@ enum { // //--------------------------------------------------------------------+ typedef struct { - uint8_t rhport; tusb_role_t role; tusb_speed_t speed; } tusb_rhport_init_t; diff --git a/src/device/dcd.h b/src/device/dcd.h index 02f3847ff..64dffbaef 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -108,7 +108,7 @@ void dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W //--------------------------------------------------------------------+ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init); +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Deinitialize controller, unset device mode. bool dcd_deinit(uint8_t rhport); diff --git a/src/device/usbd.c b/src/device/usbd.c index 12f95ab40..4b6600eb2 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -448,7 +448,7 @@ bool tud_inited(void) { return _usbd_rhport != RHPORT_INVALID; } -bool tud_rhport_init(const tusb_rhport_init_t* rh_init) { +bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { if (tud_inited()) { return true; // skip if already initialized } @@ -487,11 +487,11 @@ bool tud_rhport_init(const tusb_rhport_init_t* rh_init) { driver->init(); } - _usbd_rhport = rh_init->rhport; + _usbd_rhport = rhport; // Init device controller driver - dcd_init(rh_init); - dcd_int_enable(rh_init->rhport); + dcd_init(rhport, rh_init); + dcd_int_enable(rhport); return true; } diff --git a/src/device/usbd.h b/src/device/usbd.h index 05eb0173f..de6007fb3 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -38,19 +38,18 @@ extern "C" { //--------------------------------------------------------------------+ // New API to replace tud_init() to init device stack on specific roothub port -bool tud_rhport_init(const tusb_rhport_init_t* rh_init); +bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Init device stack on roothub port #if TUSB_VERSION_NUMBER > 2000 // 0.20.0 -TU_ATTR_DEPRECATED("Please use tusb_init(tusb_rhport_init_t*) instead") +TU_ATTR_DEPRECATED("Please use tusb_init(rhport, rh_init) instead") #endif TU_ATTR_ALWAYS_INLINE static inline bool tud_init (uint8_t rhport) { const tusb_rhport_init_t rh_init = { - .rhport = rhport, .role = TUSB_ROLE_DEVICE, .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; - return tud_rhport_init(&rh_init); + return tud_rhport_init(rhport, &rh_init); } // Deinit device stack on roothub port diff --git a/src/host/hcd.h b/src/host/hcd.h index 97cb01754..6518e6fd2 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -121,7 +121,7 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Initialize controller to host mode -bool hcd_init(const tusb_rhport_init_t* rh_init); +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // De-initialize controller bool hcd_deinit(uint8_t rhport); diff --git a/src/host/usbh.c b/src/host/usbh.c index f9e6c4e97..b5df29f50 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -352,8 +352,8 @@ bool tuh_inited(void) { return _usbh_controller != TUSB_INDEX_INVALID_8; } -bool tuh_rhport_init(const tusb_rhport_init_t* rh_init) { - if (tuh_rhport_is_active(rh_init->rhport)) { +bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + if (tuh_rhport_is_active(rhport)) { return true; // skip if already initialized } @@ -404,9 +404,9 @@ bool tuh_rhport_init(const tusb_rhport_init_t* rh_init) { } // Init host controller - _usbh_controller = rh_init->rhport; - TU_ASSERT(hcd_init(rh_init)); - hcd_int_enable(rh_init->rhport); + _usbh_controller = rhport; + TU_ASSERT(hcd_init(rhport, rh_init)); + hcd_int_enable(rhport); return true; } diff --git a/src/host/usbh.h b/src/host/usbh.h index 9b865ac1b..20fad284e 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -121,19 +121,18 @@ void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr); bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // New API to replace tuh_init() to init host stack on specific roothub port -bool tuh_rhport_init(const tusb_rhport_init_t* rh_init); +bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Init host stack #if TUSB_VERSION_NUMBER > 2000 // 0.20.0 -TU_ATTR_DEPRECATED("Please use tusb_init(tusb_rhport_init_t*) instead") +TU_ATTR_DEPRECATED("Please use tusb_init(rhport, rh_init) instead") #endif TU_ATTR_ALWAYS_INLINE static inline bool tuh_init(uint8_t rhport) { const tusb_rhport_init_t rh_init = { - .rhport = rhport, .role = TUSB_ROLE_HOST, .speed = TUH_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL, }; - return tuh_rhport_init(&rh_init); + return tuh_rhport_init(rhport, &rh_init); } // Deinit host stack on rhport diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 30d822c3b..c5e924266 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -494,8 +494,8 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { } // Initialize controller to host mode -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; tuh_max3421_int_api(rhport, false); diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index f4b236da6..4e7b28825 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -517,8 +517,8 @@ static uint16_t _ft9xx_dusb_out(uint8_t ep_number, uint8_t *buffer, uint16_t len *------------------------------------------------------------------*/ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; TU_LOG2("FT9xx initialisation\r\n"); _dcd_ft9xx_attach(); diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 315e9a86d..6038160cf 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -267,9 +267,9 @@ static void process_bus_resume(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; // save crystal-less setting (if available) #if defined(FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED) && FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED == 1 diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index bdb7abe41..5204dee66 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -234,8 +234,8 @@ static void bus_reset(uint8_t rhport) dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; tu_memclr(&_dcd_data, sizeof(dcd_data_t)); ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index fbc51f6df..14f8acb45 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -70,8 +70,8 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { // Controller API //--------------------------------------------------------------------+ -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; ci_hs_regs_t *hcd_reg = CI_HS_REG(rhport); // Reset controller @@ -83,7 +83,9 @@ bool hcd_init(const tusb_rhport_init_t* rh_init) { // LPC18XX/43XX need to set VBUS Power Select to HIGH // RHPORT1 is fullspeed only (need external PHY for Highspeed) hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT; - if ( rhport == 1 ) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; + if (rhport == 1) { + hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; + } #else hcd_reg->USBMODE = USBMODE_CM_HOST; #endif diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c index 05cebea0b..558e1269a 100644 --- a/src/portable/dialog/da146xx/dcd_da146xx.c +++ b/src/portable/dialog/da146xx/dcd_da146xx.c @@ -804,9 +804,9 @@ static void handle_ep0_nak(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; _dcd.init_called = true; if (_dcd.vbus_present) diff --git a/src/portable/espressif/esp32sx/dcd_esp32sx.c b/src/portable/espressif/esp32sx/dcd_esp32sx.c index 3d4757f03..d233813d4 100644 --- a/src/portable/espressif/esp32sx/dcd_esp32sx.c +++ b/src/portable/espressif/esp32sx/dcd_esp32sx.c @@ -172,8 +172,8 @@ static void enum_done_processing(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; ESP_LOGV(TAG, "DCD init - Start"); // A. Disconnect diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index a8437ad5b..02c8da1e0 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -582,8 +582,8 @@ void print_musb_info(musb_regs_t* musb_regs) { } #endif -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; musb_regs_t* musb_regs = MUSB_REGS(rhport); #if CFG_TUSB_DEBUG >= MUSB_DEBUG diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 9324c6a34..1c0740193 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -556,7 +556,8 @@ static void process_pipe_rx(uint8_t rhport, uint_fast8_t pipenum) * Host API *------------------------------------------------------------------*/ -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; NVIC_ClearPendingIRQ(USB0_IRQn); diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 3ee0ab6d5..089d3f520 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -470,8 +470,8 @@ static void process_bus_resume(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; intr_disable(rhport); intr_clear(rhport); diff --git a/src/portable/microchip/pic32mz/dcd_pic32mz.c b/src/portable/microchip/pic32mz/dcd_pic32mz.c index 004990046..f1614f30c 100644 --- a/src/portable/microchip/pic32mz/dcd_pic32mz.c +++ b/src/portable/microchip/pic32mz/dcd_pic32mz.c @@ -120,8 +120,8 @@ static ep0_stage_t ep0_get_stage(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; // Disable endpoint interrupts for now USB_REGS->INTRRXEbits.w = 0; USB_REGS->INTRTXEbits.w = 0; diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index c3a74ad0f..8120681a7 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -78,8 +78,8 @@ static void bus_reset(void) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - (void) rh_init; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; // Reset to get in a clean state. USB->DEVICE.CTRLA.bit.SWRST = true; diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index 2242d3336..b02889b24 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -155,8 +155,9 @@ static void bus_reset(void) } // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; + (void) rh_init; tu_memclr(_dcd_xfer, sizeof(_dcd_xfer)); dcd_connect(rhport); } diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index d57db6e55..a85d2306e 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -104,8 +104,8 @@ TU_ATTR_ALWAYS_INLINE static inline void CleanInValidateCache(uint32_t *addr, in //------------------------------------------------------------------ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; dcd_connect(rhport); } diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index 4117ab45f..b74ca847a 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -245,9 +245,9 @@ static void process_bus_active(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; tu_memclr(&_dcd, sizeof(_dcd)); USB_OTG_FS->BDT_PAGE_01 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index c1084c20c..06474e65d 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -230,10 +230,10 @@ static void xact_in_dma(uint8_t epnum) { //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; - TU_LOG2("dcd init\r\n"); +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; + TU_LOG2("dcd init\r\n"); } void dcd_int_enable(uint8_t rhport) { diff --git a/src/portable/nuvoton/nuc120/dcd_nuc120.c b/src/portable/nuvoton/nuc120/dcd_nuc120.c index c9e8d86fd..89fca021f 100644 --- a/src/portable/nuvoton/nuc120/dcd_nuc120.c +++ b/src/portable/nuvoton/nuc120/dcd_nuc120.c @@ -201,9 +201,9 @@ static const uint32_t enabled_irqs = USBD_INTSTS_FLDET_STS_Msk | USBD_INTSTS_BUS NUC100/NUC120 TinyUSB API driver implementation */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; USBD->ATTR = 0x7D0; diff --git a/src/portable/nuvoton/nuc121/dcd_nuc121.c b/src/portable/nuvoton/nuc121/dcd_nuc121.c index 78c65a91c..b813eea77 100644 --- a/src/portable/nuvoton/nuc121/dcd_nuc121.c +++ b/src/portable/nuvoton/nuc121/dcd_nuc121.c @@ -209,9 +209,9 @@ enum { NUC121/NUC125/NUC126 TinyUSB API driver implementation */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; #ifdef SUPPORT_LPM USBD->ATTR = 0x7D0 | USBD_LPMACK; diff --git a/src/portable/nuvoton/nuc505/dcd_nuc505.c b/src/portable/nuvoton/nuc505/dcd_nuc505.c index caeb89a0a..3821b6ec8 100644 --- a/src/portable/nuvoton/nuc505/dcd_nuc505.c +++ b/src/portable/nuvoton/nuc505/dcd_nuc505.c @@ -279,9 +279,9 @@ static const uint32_t enabled_irqs = USBD_GINTEN_USBIEN_Msk | \ NUC505 TinyUSB API driver implementation */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; /* configure interrupts in their initial state; BUSINTEN and CEPINTEN will be subsequently and dynamically re-written as needed */ USBD->GINTEN = enabled_irqs; diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 2d08e84a5..1b7f56e8c 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -265,9 +265,9 @@ static void process_bus_resume(uint8_t rhport) /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; // save crystal-less setting (if available) #if defined(FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED) && FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED == 1 diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index e9c00b8f9..f5ca73c18 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -368,7 +368,8 @@ static void process_bus_reset(uint8_t rhport) /*------------------------------------------------------------------*/ /* Host API *------------------------------------------------------------------*/ -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; KHCI->USBTRC0 |= USB_USBTRC0_USBRESET_MASK; while (KHCI->USBTRC0 & USB_USBTRC0_USBRESET_MASK); diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index e28b27919..22b4500c5 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -167,9 +167,9 @@ static void bus_reset(void) tu_memclr(&_dcd, sizeof(dcd_data_t)); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; //------------- user manual 11.13 usb device controller initialization -------------// // step 6 : set up control endpoint diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 06a82c4e7..e59a0f526 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -289,8 +289,8 @@ static void edpt_reset_all(uint8_t rhport) } prepare_setup_packet(rhport); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; edpt_reset_all(rhport); dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index fbaa5208e..ce35eab70 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -178,9 +178,9 @@ TU_ATTR_ALWAYS_INLINE static inline void *_virt_addr(void *physical_address) } // Initialization according to 5.1.1.4 -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; //------------- Data Structure init -------------// tu_memclr(&ohci_data, sizeof(ohci_data_t)); diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 83589efa0..89d60a21e 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -50,7 +50,8 @@ static usb_descriptor_buffers_t desc; *------------------------------------------------------------------*/ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; static pio_usb_configuration_t config = PIO_USB_DEFAULT_CONFIG; usb_device = pio_usb_device_init(&config, &desc); diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 4386bbce4..6422afff1 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -55,7 +55,8 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { return true; } -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; // To run USB SOF interrupt in core1, call this init in core1 diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 9473d3bd8..9a945caf8 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -369,8 +369,8 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) { #define PICO_SHARED_IRQ_HANDLER_HIGHEST_ORDER_PRIORITY 0xff #endif -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; assert(rhport == 0); TU_LOG(2, "Chip Version B%u\r\n", rp2040_chip_version()); diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index a870418a8..2c0a3fd49 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -375,7 +375,8 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; pico_trace("hcd_init %d\n", rhport); assert(rhport == 0); diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index e8e1bf041..3da4ef50b 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -657,8 +657,8 @@ static void enable_interrupt(uint32_t pswi) } #endif -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; rusb2_reg_t* rusb = RUSB2_REG(rhport); rusb2_module_start(rhport, true); diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 35e85a3b0..4c81b05be 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -466,8 +466,8 @@ static void enable_interrupt(uint32_t pswi) } #endif -bool hcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; rusb2_reg_t* rusb = RUSB2_REG(rhport); rusb2_module_start(rhport, true); diff --git a/src/portable/sony/cxd56/dcd_cxd56.c b/src/portable/sony/cxd56/dcd_cxd56.c index fe1c42249..93eb8674e 100644 --- a/src/portable/sony/cxd56/dcd_cxd56.c +++ b/src/portable/sony/cxd56/dcd_cxd56.c @@ -201,9 +201,9 @@ static void _dcd_resume(FAR struct usbdevclass_driver_s *driver, FAR struct usbd dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; usbdcd_driver.usbdevclass_driver.speed = USB_SPEED_HIGH; usbdcd_driver.usbdevclass_driver.ops = &g_driverops; diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 8e9bb0b30..a4bd2da10 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -184,8 +184,8 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint8_t epnum, uint //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; // Follow the RM mentions to use a special ordering of PDWN and FRES for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index d7bf1068a..85c7bef5d 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -867,8 +867,8 @@ static void usb_isr_handler(void) { dcd_int_handler(0); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; dcd_disconnect(rhport); USBC_HardwareReset(); USBC_PhyConfig(); diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 580960e24..e44ca96d1 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -650,10 +650,10 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { return true; } -void dcd_init(const tusb_rhport_init_t* rh_init) { +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; // Programming model begins in the last section of the chapter on the USB // peripheral in each Reference Manual. - const uint8_t rhport = rh_init->rhport; dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Check Synopsys ID register, failed if controller clock/power is not enabled diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c index 56a89e89a..5ce650844 100644 --- a/src/portable/template/dcd_template.c +++ b/src/portable/template/dcd_template.c @@ -40,8 +40,8 @@ *------------------------------------------------------------------*/ // Initialize controller to device mode -void dcd_init(const tusb_rhport_init_t* rh_init) { - (void) rh_init; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; } // Enable device interrupt diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index 9386e95cc..d8bca196f 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -44,7 +44,8 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { } // Initialize controller to host mode -bool hcd_init(const tusb_rhport_init_t* rh_init) { +bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; return false; } diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 120d5c4b9..6150c254f 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -130,8 +130,8 @@ static void enable_functional_reset(const bool enable) /*------------------------------------------------------------------*/ /* Controller API *------------------------------------------------------------------*/ -void dcd_init(const tusb_rhport_init_t* rh_init) { - (void) rh_init; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rhport; (void) rh_init; USBKEYPID = USBKEY; @@ -699,11 +699,10 @@ static void handle_bus_power_event(void *param) { // A successful lock is indicated by all PLL-related interrupt flags being cleared. if(!USBPLLIR) { const tusb_rhport_init_t rhport_init = { - .rhport = 0, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_FULL }; - dcd_init(&rhport_init); // Re-initialize the USB module. + dcd_init(0, &rhport_init); // Re-initialize the USB module. } } else { // Event caused by removal of bus power. USBPWRCTL |= VBONIE; // Enable bus-power-applied interrupt. diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c index da7a5a81a..8287230a4 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.c +++ b/src/portable/valentyusb/eptri/dcd_eptri.c @@ -336,9 +336,9 @@ static void dcd_reset(void) } // Initializes the USB peripheral for device mode and enables it. -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; usb_pullup_out_write(0); diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 4a7ad704b..9af3a1acb 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -123,8 +123,8 @@ static void update_out(uint8_t rhport, uint8_t ep, size_t rx_len) { } /* public functions */ -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + (void) rh_init; // init registers USBOTG_FS->BASE_CTRL = USBFS_CTRL_SYS_CTRL | USBFS_CTRL_INT_BUSY | USBFS_CTRL_DMA_EN; USBOTG_FS->UDEV_CTRL = USBFS_UDEV_CTRL_PD_DIS | USBFS_UDEV_CTRL_PORT_EN; diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 77ebc378c..64a88914f 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -131,9 +131,9 @@ static void xfer_data_packet(uint8_t ep_num, tusb_dir_t ep_dir, xfer_ctl_t* xfer ep_set_response_and_toggle(ep_num, ep_dir, USBHS_EP_R_RES_ACK); } -void dcd_init(const tusb_rhport_init_t* rh_init) { - const uint8_t rhport = rh_init->rhport; +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { (void) rhport; + (void) rh_init; memset(&xfer_status, 0, sizeof(xfer_status)); diff --git a/src/tusb.c b/src/tusb.c index 3eb299dff..e6f8055b7 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -47,29 +47,27 @@ static tusb_role_t _rhport_role[TUP_USBIP_CONTROLLER_NUM] = { 0 }; // Public API //--------------------------------------------------------------------+ -bool tusb_rhport_init(const tusb_rhport_init_t* rh_init) { +bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // backward compatible called with tusb_init(void) #if defined(TUD_OPT_RHPORT) || defined(TUH_OPT_RHPORT) if (rh_init == NULL) { #if CFG_TUD_ENABLED && defined(TUD_OPT_RHPORT) // init device stack CFG_TUSB_RHPORTx_MODE must be defined const tusb_rhport_init_t dev_init = { - .rhport = TUD_OPT_RHPORT, .role = TUSB_ROLE_DEVICE, .speed = TUD_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; - TU_ASSERT ( tud_rhport_init(&dev_init) ); + TU_ASSERT ( tud_rhport_init(rhport, &dev_init) ); _rhport_role[TUD_OPT_RHPORT] = TUSB_ROLE_DEVICE; #endif #if CFG_TUH_ENABLED && defined(TUH_OPT_RHPORT) // init host stack CFG_TUSB_RHPORTx_MODE must be defined const tusb_rhport_init_t host_init = { - .rhport = TUH_OPT_RHPORT, .role = TUSB_ROLE_HOST, .speed = TUH_OPT_HIGH_SPEED ? TUSB_SPEED_HIGH : TUSB_SPEED_FULL }; - TU_ASSERT( tuh_rhport_init(&host_init) ); + TU_ASSERT( tuh_rhport_init(TUH_OPT_RHPORT, &host_init) ); _rhport_role[TUH_OPT_RHPORT] = TUSB_ROLE_HOST; #endif @@ -78,21 +76,21 @@ bool tusb_rhport_init(const tusb_rhport_init_t* rh_init) { #endif // new API with explicit rhport and role - TU_ASSERT(rh_init->rhport < TUP_USBIP_CONTROLLER_NUM && rh_init->role != TUSB_ROLE_INVALID); + TU_ASSERT(rhport < TUP_USBIP_CONTROLLER_NUM && rh_init->role != TUSB_ROLE_INVALID); #if CFG_TUD_ENABLED if (rh_init->role == TUSB_ROLE_DEVICE) { - TU_ASSERT( tud_rhport_init(rh_init) ); + TU_ASSERT(tud_rhport_init(rhport, rh_init)); } #endif #if CFG_TUH_ENABLED if (rh_init->role == TUSB_ROLE_HOST) { - TU_ASSERT( tuh_rhport_init(rh_init) ); + TU_ASSERT(tuh_rhport_init(rhport, rh_init)); } #endif - _rhport_role[rh_init->rhport] = rh_init->role; + _rhport_role[rhport] = rh_init->role; return true; } diff --git a/src/tusb.h b/src/tusb.h index c12abba8b..2f30a5739 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -134,20 +134,21 @@ #if CFG_TUH_ENABLED || CFG_TUD_ENABLED // Internal helper for backward compatible with tusb_init(void) -bool tusb_rhport_init(const tusb_rhport_init_t* rh_init); +bool tusb_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init); // Initialize roothub port with device/host role // Note: when using with RTOS, this should be called after scheduler/kernel is started. // Otherwise, it could cause kernel issue since USB IRQ handler does use RTOS queue API. // Note2: defined as macro for backward compatible with tusb_init(void), can be changed to function in the future. #if defined(TUD_OPT_RHPORT) || defined(TUH_OPT_RHPORT) -#define _tusb_init_arg0() tusb_rhport_init(NULL) + #define _tusb_init_arg0() tusb_rhport_init(0, NULL) #else -#define _tusb_init_arg0() TU_VERIFY_STATIC(false, "CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE must be defined") + #define _tusb_init_arg0() TU_VERIFY_STATIC(false, "CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE must be defined") #endif -#define _tusb_init_arg1(_rh_init) tusb_rhport_init(_rh_init) -#define tusb_init(...) TU_FUNC_OPTIONAL_ARG(_tusb_init, __VA_ARGS__) +#define _tusb_init_arg1(_rhport) _tusb_init_arg0() +#define _tusb_init_arg2(_rhport, _rh_init) tusb_rhport_init(_rhport, _rh_init) +#define tusb_init(...) TU_FUNC_OPTIONAL_ARG(_tusb_init, __VA_ARGS__) // Check if stack is initialized bool tusb_inited(void); diff --git a/test/fuzz/dcd_fuzz.cc b/test/fuzz/dcd_fuzz.cc index 7ef0c7446..e76ae5087 100644 --- a/test/fuzz/dcd_fuzz.cc +++ b/test/fuzz/dcd_fuzz.cc @@ -46,7 +46,8 @@ tu_static State state = {false, 0, 0}; // All no-ops as we are fuzzing. //--------------------------------------------------------------------+ extern "C" { -void dcd_init(const tusb_rhport_init_t* rh_init) { +void dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { + UNUSED(rhport); UNUSED(rh_init); return; } diff --git a/test/unit-test/test/device/msc/test_msc_device.c b/test/unit-test/test/device/msc/test_msc_device.c index 4033bf158..60fcdb41c 100644 --- a/test/unit-test/test/device/msc/test_msc_device.c +++ b/test/unit-test/test/device/msc/test_msc_device.c @@ -199,13 +199,12 @@ void setUp(void) if ( !tud_inited() ) { tusb_rhport_init_t dev_init = { - .rhport = 0, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; - dcd_init_Expect(&dev_init); - tusb_init(&dev_init); + dcd_init_Expect(0, &dev_init); + tusb_init(0, &dev_init); } dcd_event_bus_reset(rhport, TUSB_SPEED_HIGH, false); diff --git a/test/unit-test/test/device/usbd/test_usbd.c b/test/unit-test/test/device/usbd/test_usbd.c index 8f900f656..598dac641 100644 --- a/test/unit-test/test/device/usbd/test_usbd.c +++ b/test/unit-test/test/device/usbd/test_usbd.c @@ -102,44 +102,38 @@ uint8_t const* desc_configuration; //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ -uint8_t const * tud_descriptor_device_cb(void) -{ +uint8_t const * tud_descriptor_device_cb(void) { return desc_device; } -uint8_t const * tud_descriptor_configuration_cb(uint8_t index) -{ +uint8_t const * tud_descriptor_configuration_cb(uint8_t index) { return desc_configuration; } -uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) -{ +uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) { (void) langid; return NULL; } -void setUp(void) -{ +void setUp(void) { dcd_int_disable_Ignore(); dcd_int_enable_Ignore(); if ( !tud_inited() ) { tusb_rhport_init_t dev_init = { - .rhport = 0, .role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO }; mscd_init_Expect(); - dcd_init_Expect(&dev_init); + dcd_init_Expect(0, &dev_init); - tusb_init(&dev_init); + tusb_init(0, &dev_init); } } -void tearDown(void) -{ +void tearDown(void) { } //--------------------------------------------------------------------+ -- cgit v1.3.1 From be25aa31f6720e0efe96e8656f46adf0ccbbce50 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 Nov 2024 10:20:38 +0700 Subject: hcd dwc2 add dcache support, usbh correctly use cache line size with TUH_EPBUF_DEF --- .../components/tinyusb_src/CMakeLists.txt | 3 +- src/host/hcd.h | 6 +- src/host/usbh.c | 72 ++++++++++++++-------- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- src/portable/synopsys/dwc2/hcd_dwc2.c | 28 ++++++++- 5 files changed, 78 insertions(+), 33 deletions(-) (limited to 'src/host/hcd.h') diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index 9f55c8d5a..95fb2e440 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -18,7 +18,8 @@ list(APPEND compile_definitions if (target STREQUAL esp32p4) # P4 change alignment to 64 (DCache line size) for possible DMA configuration list(APPEND compile_definitions - CFG_TUSB_MEM_ALIGN=__attribute__\(\(aligned\(64\)\)\) + CFG_TUD_MEM_ALIGN=__attribute__\(\(aligned\(64\)\)\) + CFG_TUH_MEM_ALIGN=__attribute__\(\(aligned\(64\)\)\) ) endif () diff --git a/src/host/hcd.h b/src/host/hcd.h index 6518e6fd2..56b6fdb5d 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -103,15 +103,15 @@ typedef struct { // clean/flush data cache: write cache -> memory. // Required before an DMA TX transfer to make sure data is in memory -bool hcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean(void const* addr, uint32_t data_size); // invalidate data cache: mark cache as invalid, next read will read from memory // Required BOTH before and after an DMA RX transfer -bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_invalidate(void const* addr, uint32_t data_size); // clean and invalidate data cache // Required before an DMA transfer where memory is both read/write by DMA -bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size); //--------------------------------------------------------------------+ // Controller API diff --git a/src/host/usbh.c b/src/host/usbh.c index b0a2b2160..f2683e235 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -65,6 +65,21 @@ TU_ATTR_WEAK void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_is (void) in_isr; } +TU_ATTR_WEAK bool hcd_dcache_clean(const void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + return false; +} + +TU_ATTR_WEAK bool hcd_dcache_invalidate(const void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + return false; +} + +TU_ATTR_WEAK bool hcd_dcache_clean_invalidate(const void* addr, uint32_t data_size) { + (void) addr; (void) data_size; + return false; +} + //--------------------------------------------------------------------+ // USBH-HCD common data structure //--------------------------------------------------------------------+ @@ -249,14 +264,10 @@ static usbh_device_t _usbh_devices[TOTAL_DEVICES]; OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; -CFG_TUH_MEM_SECTION CFG_TUH_MEM_ALIGN -static uint8_t _usbh_ctrl_buf[CFG_TUH_ENUMERATION_BUFSIZE]; - // Control transfers: since most controllers do not support multiple control transfers // on multiple devices concurrently and control transfers are not used much except for // enumeration, we will only execute control transfers one at a time. -CFG_TUH_MEM_SECTION struct { - CFG_TUH_MEM_ALIGN tusb_control_request_t request; +static struct { uint8_t* buffer; tuh_xfer_cb_t complete_cb; uintptr_t user_data; @@ -264,7 +275,14 @@ CFG_TUH_MEM_SECTION struct { uint8_t daddr; volatile uint8_t stage; volatile uint16_t actual_len; -}_ctrl_xfer; +} _ctrl_xfer; + +typedef struct { + TUH_EPBUF_TYPE_DEF(request, tusb_control_request_t); + TUH_EPBUF_DEF(ctrl, CFG_TUH_ENUMERATION_BUFSIZE); +} usbh_epbuf_t; + +CFG_TUH_MEM_SECTION static usbh_epbuf_t _usbh_epbuf; //------------- Helper Function -------------// @@ -475,7 +493,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: - // due to the shared _usbh_ctrl_buf, we must complete enumerating one device before enumerating another one. + // due to the shared control buffer, we must complete enumerating one device before enumerating another one. // TODO better to have an separated queue for newly attached devices if (_dev0.enumerating) { // Some device can cause multiple duplicated attach events @@ -622,10 +640,10 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { _ctrl_xfer.daddr = daddr; _ctrl_xfer.actual_len = 0; - _ctrl_xfer.request = (*xfer->setup); _ctrl_xfer.buffer = xfer->buffer; _ctrl_xfer.complete_cb = xfer->complete_cb; _ctrl_xfer.user_data = xfer->user_data; + _usbh_epbuf.request = (*xfer->setup); } (void) osal_mutex_unlock(_usbh_mutex); @@ -639,7 +657,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { TU_LOG_BUF_USBH(xfer->setup, 8); if (xfer->complete_cb) { - TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t const*) &_ctrl_xfer.request) ); + TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t const*) &_usbh_epbuf.request) ); }else { // blocking if complete callback is not provided // change callback to internal blocking, and result as user argument @@ -649,7 +667,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { _ctrl_xfer.user_data = (uintptr_t) &result; _ctrl_xfer.complete_cb = _control_blocking_complete_cb; - TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t*) &_ctrl_xfer.request) ); + TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t*) &_usbh_epbuf.request) ); while (result == XFER_RESULT_INVALID) { // Note: this can be called within an callback ie. part of tuh_task() @@ -681,7 +699,7 @@ static void _control_xfer_complete(uint8_t daddr, xfer_result_t result) { TU_LOG_USBH("\r\n"); // duplicate xfer since user can execute control transfer within callback - tusb_control_request_t const request = _ctrl_xfer.request; + tusb_control_request_t const request = _usbh_epbuf.request; tuh_xfer_t xfer_temp = { .daddr = daddr, .ep_addr = 0, @@ -704,7 +722,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t (void) ep_addr; const uint8_t rhport = usbh_get_rhport(daddr); - tusb_control_request_t const * request = &_ctrl_xfer.request; + tusb_control_request_t const * request = &_usbh_epbuf.request; if (XFER_RESULT_SUCCESS != result) { TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %" PRIu32 "\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); @@ -817,7 +835,7 @@ uint8_t usbh_get_rhport(uint8_t dev_addr) { } uint8_t *usbh_get_enum_buf(void) { - return _usbh_ctrl_buf; + return _usbh_epbuf.ctrl; } void usbh_int_set(bool enabled) { @@ -1279,7 +1297,7 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu // Enumeration Process // is a lengthy process with a series of control transfer to configure // newly attached device. -// NOTE: due to the shared _usbh_ctrl_buf, we must complete enumerating +// NOTE: due to the shared control buffer, we must complete enumerating // one device before enumerating another one. //--------------------------------------------------------------------+ @@ -1347,7 +1365,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { case ENUM_HUB_CLEAR_RESET_1: { hub_port_status_response_t port_status; - memcpy(&port_status, _usbh_ctrl_buf, sizeof(hub_port_status_response_t)); + memcpy(&port_status, _usbh_epbuf.ctrl, sizeof(hub_port_status_response_t)); if (!port_status.status.connection) { // device unplugged while delaying, nothing else to do @@ -1368,13 +1386,13 @@ static void process_enumeration(tuh_xfer_t* xfer) { case ENUM_HUB_GET_STATUS_2: tusb_time_delay_ms_api(ENUM_RESET_DELAY_MS); - TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, + TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_epbuf.ctrl, process_enumeration, ENUM_HUB_CLEAR_RESET_2),); break; case ENUM_HUB_CLEAR_RESET_2: { hub_port_status_response_t port_status; - memcpy(&port_status, _usbh_ctrl_buf, sizeof(hub_port_status_response_t)); + memcpy(&port_status, _usbh_epbuf.ctrl, sizeof(hub_port_status_response_t)); // Acknowledge Port Reset Change if Reset Successful if (port_status.change.reset) { @@ -1392,7 +1410,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { // Get first 8 bytes of device descriptor for Control Endpoint size TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(addr0, _usbh_ctrl_buf, 8, + TU_ASSERT(tuh_descriptor_get_device(addr0, _usbh_epbuf.ctrl, 8, process_enumeration, ENUM_SET_ADDR),); break; } @@ -1443,13 +1461,13 @@ static void process_enumeration(tuh_xfer_t* xfer) { // Get full device descriptor TU_LOG_USBH("Get Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_ctrl_buf, sizeof(tusb_desc_device_t), + TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_epbuf.ctrl, sizeof(tusb_desc_device_t), process_enumeration, ENUM_GET_9BYTE_CONFIG_DESC),); break; } case ENUM_GET_9BYTE_CONFIG_DESC: { - tusb_desc_device_t const* desc_device = (tusb_desc_device_t const*) _usbh_ctrl_buf; + tusb_desc_device_t const* desc_device = (tusb_desc_device_t const*) _usbh_epbuf.ctrl; usbh_device_t* dev = get_device(daddr); TU_ASSERT(dev,); @@ -1459,18 +1477,18 @@ static void process_enumeration(tuh_xfer_t* xfer) { dev->i_product = desc_device->iProduct; dev->i_serial = desc_device->iSerialNumber; - // if (tuh_attach_cb) tuh_attach_cb((tusb_desc_device_t*) _usbh_ctrl_buf); + // if (tuh_attach_cb) tuh_attach_cb((tusb_desc_device_t*) _usbh_epbuf.ctrl); // Get 9-byte for total length uint8_t const config_idx = CONFIG_NUM - 1; TU_LOG_USBH("Get Configuration[0] Descriptor (9 bytes)\r\n"); - TU_ASSERT(tuh_descriptor_get_configuration(daddr, config_idx, _usbh_ctrl_buf, 9, + TU_ASSERT(tuh_descriptor_get_configuration(daddr, config_idx, _usbh_epbuf.ctrl, 9, process_enumeration, ENUM_GET_FULL_CONFIG_DESC),); break; } case ENUM_GET_FULL_CONFIG_DESC: { - uint8_t const* desc_config = _usbh_ctrl_buf; + uint8_t const* desc_config = _usbh_epbuf.ctrl; // Use offsetof to avoid pointer to the odd/misaligned address uint16_t const total_len = tu_le16toh( @@ -1482,7 +1500,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { // Get full configuration descriptor uint8_t const config_idx = CONFIG_NUM - 1; TU_LOG_USBH("Get Configuration[0] Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_configuration(daddr, config_idx, _usbh_ctrl_buf, total_len, + TU_ASSERT(tuh_descriptor_get_configuration(daddr, config_idx, _usbh_epbuf.ctrl, total_len, process_enumeration, ENUM_SET_CONFIG),); break; } @@ -1500,7 +1518,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { // Parse configuration & set up drivers // driver_open() must not make any usb transfer - TU_ASSERT(_parse_configuration_descriptor(daddr, (tusb_desc_configuration_t*) _usbh_ctrl_buf),); + TU_ASSERT(_parse_configuration_descriptor(daddr, (tusb_desc_configuration_t*) _usbh_epbuf.ctrl),); // Start the Set Configuration process for interfaces (itf = TUSB_INDEX_INVALID_8) // Since driver can perform control transfer within its set_config, this is done asynchronously. @@ -1561,7 +1579,7 @@ static bool enum_new_device(hcd_event_t* event) { tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); // ENUM_HUB_GET_STATUS - TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, + TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_epbuf.ctrl, process_enumeration, ENUM_HUB_CLEAR_RESET_1)); } #endif // hub @@ -1589,7 +1607,7 @@ static uint8_t get_new_address(bool is_hub) { } static bool enum_request_set_addr(void) { - tusb_desc_device_t const* desc_device = (tusb_desc_device_t const*) _usbh_ctrl_buf; + tusb_desc_device_t const* desc_device = (tusb_desc_device_t const*) _usbh_epbuf.ctrl; // Get new address uint8_t const new_addr = get_new_address(desc_device->bDeviceClass == TUSB_CLASS_HUB); diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 8a9d06bc2..04108499d 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -31,7 +31,7 @@ #if CFG_TUD_ENABLED && defined(TUP_USBIP_DWC2) -#if !CFG_TUD_DWC2_SLAVE_ENABLE && !CFG_TUH_DWC2_DMA_ENABLE +#if !(CFG_TUD_DWC2_SLAVE_ENABLE || CFG_TUH_DWC2_DMA_ENABLE) #error DWC2 require either CFG_TUD_DWC2_SLAVE_ENABLE or CFG_TUH_DWC2_DMA_ENABLE to be enabled #endif diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 8e0162ed6..ebbb6200a 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -28,6 +28,10 @@ #if CFG_TUH_ENABLED && defined(TUP_USBIP_DWC2) +#if !(CFG_TUH_DWC2_SLAVE_ENABLE || CFG_TUH_DWC2_DMA_ENABLE) +#error DWC2 require either CFG_TUH_DWC2_SLAVE_ENABLE or CFG_TUH_DWC2_DMA_ENABLE to be enabled +#endif + // Debug level for DWC2 #define DWC2_DEBUG 2 @@ -132,6 +136,23 @@ TU_ATTR_ALWAYS_INLINE static inline bool dma_host_enabled(const dwc2_regs_t* dwc return CFG_TUH_DWC2_DMA_ENABLE && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; } +#if CFG_TUH_MEM_DCACHE_ENABLE +bool hcd_dcache_clean(const void* addr, uint32_t data_size) { + TU_VERIFY(addr && data_size); + return dwc2_dcache_clean(addr, data_size); +} + +bool hcd_dcache_invalidate(const void* addr, uint32_t data_size) { + TU_VERIFY(addr && data_size); + return dwc2_dcache_invalidate(addr, data_size); +} + +bool hcd_dcache_clean_invalidate(const void* addr, uint32_t data_size) { + TU_VERIFY(addr && data_size); + return dwc2_dcache_clean_invalidate(addr, data_size); +} +#endif + // Allocate a channel for new transfer TU_ATTR_ALWAYS_INLINE static inline uint8_t channel_alloc(dwc2_regs_t* dwc2) { const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); @@ -555,6 +576,7 @@ static bool channel_xfer_start(dwc2_regs_t* dwc2, uint8_t ch_id) { if (hcchar_bm->ep_dir == TUSB_DIR_IN) { channel_send_in_token(dwc2, channel); } else { + hcd_dcache_clean(edpt->buffer, edpt->buflen); channel->hcchar |= HCCHAR_CHENA; } } else { @@ -1119,13 +1141,17 @@ static void handle_channel_irq(uint8_t rhport, bool in_isr) { const uint32_t hcint = channel->hcint; channel->hcint = hcint; // clear interrupt - bool is_done; + bool is_done = false; if (is_dma) { #if CFG_TUH_DWC2_DMA_ENABLE if (hcchar_bm.ep_dir == TUSB_DIR_OUT) { is_done = handle_channel_out_dma(dwc2, ch_id, hcint); } else { is_done = handle_channel_in_dma(dwc2, ch_id, hcint); + if (is_done && (channel->hcdma > xfer->xferred_bytes)) { + // hcdma is increased by word --> need to align4 + hcd_dcache_invalidate((void*) tu_align4(channel->hcdma - xfer->xferred_bytes), xfer->xferred_bytes); + } } #endif } else { -- cgit v1.3.1 From 65e01fff2e7ab5302baa45bdd81a1d774e269452 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 16:15:58 +0700 Subject: add tuh_edpt_close() API, it will abort any pending transfer implement hcd_edpt_close() for pio-usb and max3421e, also move max3421e api into its own header. --- examples/host/bare_api/src/main.c | 254 +++++++++++-------------- src/host/hcd.h | 3 + src/host/usbh.c | 6 + src/host/usbh.h | 7 + src/portable/analog/max3421/hcd_max3421.c | 40 ++-- src/portable/analog/max3421/hcd_max3421.h | 63 ++++++ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 5 + tools/get_deps.py | 4 +- 8 files changed, 218 insertions(+), 164 deletions(-) create mode 100644 src/portable/analog/max3421/hcd_max3421.h (limited to 'src/host/hcd.h') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index f582f4f5a..0c76ff0c9 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -55,16 +55,15 @@ uint8_t* get_hid_buf(uint8_t daddr); void free_hid_buf(uint8_t daddr); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Bare API Example\r\n"); // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .role = TUSB_ROLE_HOST, - .speed = TUSB_SPEED_AUTO + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUH_RHPORT, &host_init); @@ -72,8 +71,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { // tinyusb host task tuh_task(); led_blinking_task(); @@ -85,8 +83,7 @@ int main(void) /*------------- TinyUSB Callbacks -------------*/ // Invoked when device is mounted (configured) -void tuh_mount_cb (uint8_t daddr) -{ +void tuh_mount_cb(uint8_t daddr) { printf("Device attached, address = %d\r\n", daddr); // Get Device Descriptor @@ -95,8 +92,7 @@ void tuh_mount_cb (uint8_t daddr) } /// Invoked when device is unmounted (bus reset/unplugged) -void tuh_umount_cb(uint8_t daddr) -{ +void tuh_umount_cb(uint8_t daddr) { printf("Device removed, address = %d\r\n", daddr); free_hid_buf(daddr); } @@ -104,11 +100,8 @@ void tuh_umount_cb(uint8_t daddr) //--------------------------------------------------------------------+ // Device Descriptor //--------------------------------------------------------------------+ - -void print_device_descriptor(tuh_xfer_t* xfer) -{ - if ( XFER_RESULT_SUCCESS != xfer->result ) - { +void print_device_descriptor(tuh_xfer_t *xfer) { + if (XFER_RESULT_SUCCESS != xfer->result) { printf("Failed to get device descriptor\r\n"); return; } @@ -131,33 +124,29 @@ void print_device_descriptor(tuh_xfer_t* xfer) // Get String descriptor using Sync API uint16_t temp_buf[128]; - printf(" iManufacturer %u " , desc_device.iManufacturer); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) ) - { + printf(" iManufacturer %u ", desc_device.iManufacturer); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iProduct %u " , desc_device.iProduct); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iProduct %u ", desc_device.iProduct); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iSerialNumber %u " , desc_device.iSerialNumber); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iSerialNumber %u ", desc_device.iSerialNumber); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); // Get configuration descriptor with sync API - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) - { - parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) { + parse_config_descriptor(daddr, (tusb_desc_configuration_t *) temp_buf); } } @@ -171,37 +160,33 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); // simple configuration parser to open and listen to HID Endpoint IN -void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) -{ - uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); - uint8_t const* p_desc = tu_desc_next(desc_cfg); +void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const *desc_cfg) { + uint8_t const *desc_end = ((uint8_t const *) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); + uint8_t const *p_desc = tu_desc_next(desc_cfg); // parse each interfaces - while( p_desc < desc_end ) - { + while (p_desc < desc_end) { uint8_t assoc_itf_count = 1; // Class will always starts with Interface Association (if any) and then Interface descriptor - if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) - { - tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; + if (TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc)) { + tusb_desc_interface_assoc_t const *desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; assoc_itf_count = desc_iad->bInterfaceCount; - p_desc = tu_desc_next(p_desc); // next to Interface + p_desc = tu_desc_next(p_desc);// next to Interface } // must be interface from now - if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return; - tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc; + if (TUSB_DESC_INTERFACE != tu_desc_type(p_desc)) { return; } + tusb_desc_interface_t const *desc_itf = (tusb_desc_interface_t const *) p_desc; - uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc)); + uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end - p_desc)); // probably corrupted descriptor - if(drv_len < sizeof(tusb_desc_interface_t)) return; + if (drv_len < sizeof(tusb_desc_interface_t)) { return; } // only open and listen to HID endpoint IN - if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) - { + if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) { open_hid_interface(dev_addr, desc_itf, drv_len); } @@ -210,25 +195,21 @@ void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* } } -uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len) -{ - uint8_t const* p_desc = (uint8_t const*) desc_itf; +uint16_t count_interface_total_len(tusb_desc_interface_t const *desc_itf, uint8_t itf_count, uint16_t max_len) { + uint8_t const *p_desc = (uint8_t const *) desc_itf; uint16_t len = 0; - while (itf_count--) - { + while (itf_count--) { // Next on interface desc len += tu_desc_len(desc_itf); p_desc = tu_desc_next(p_desc); - while (len < max_len) - { + while (len < max_len) { // return on IAD regardless of itf count - if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len; + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { return len; } - if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && - ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 ) - { + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && + ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == 0) { break; } @@ -246,46 +227,45 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void hid_report_received(tuh_xfer_t* xfer); -void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) -{ +void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) { // len = interface + hid + n*endpoints uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); // corrupted descriptor - if (max_len < drv_len) return; + if (max_len < drv_len) { return; } uint8_t const *p_desc = (uint8_t const *) desc_itf; // HID descriptor p_desc = tu_desc_next(p_desc); tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc; - if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return; + if (HID_DESC_TYPE_HID != desc_hid->bDescriptorType) { return; } // Endpoint descriptor p_desc = tu_desc_next(p_desc); - tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc; - - for(int i = 0; i < desc_itf->bNumEndpoints; i++) - { - if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return; - - if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { - // skip if failed to open endpoint - if ( ! tuh_edpt_open(daddr, desc_ep) ) return; - - uint8_t* buf = get_hid_buf(daddr); - if (!buf) return; // out of memory - - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = desc_ep->bEndpointAddress, - .buflen = 64, - .buffer = buf, - .complete_cb = hid_report_received, - .user_data = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + + for (int i = 0; i < desc_itf->bNumEndpoints; i++) { + if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) { return; } + + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + if (!tuh_edpt_open(daddr, desc_ep)) { + return; // skip if failed to open endpoint + } + + uint8_t *buf = get_hid_buf(daddr); + if (!buf) { + return;// out of memory + } + + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = desc_ep->bEndpointAddress, + .buflen = 64, + .buffer = buf, + .complete_cb = hid_report_received, + .user_data = (uintptr_t) buf,// since buffer is not available in callback, use user data to store the buffer }; // submit transfer for this EP @@ -299,18 +279,17 @@ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, ui } } -void hid_report_received(tuh_xfer_t* xfer) -{ +void hid_report_received(tuh_xfer_t *xfer) { // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback - uint8_t* buf = (uint8_t*) xfer->user_data; + uint8_t *buf = (uint8_t *) xfer->user_data; - if (xfer->result == XFER_RESULT_SUCCESS) - { + if (xfer->result == XFER_RESULT_SUCCESS) { printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr); - for(uint32_t i=0; iactual_len; i++) - { - if (i%16 == 0) printf("\r\n "); + for (uint32_t i = 0; i < xfer->actual_len; i++) { + if (i % 16 == 0) { + printf("\r\n "); + } printf("%02X ", buf[i]); } printf("\r\n"); @@ -329,12 +308,9 @@ void hid_report_received(tuh_xfer_t* xfer) //--------------------------------------------------------------------+ // get an buffer from pool -uint8_t* get_hid_buf(uint8_t daddr) -{ - for(size_t i=0; i> 6 & 0x1F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } else { - // TODO: Verify surrogate. - *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } - // TODO: Handle UTF-16 code points that take two entries. + // TODO: Check for runover. + (void) utf8_len; + // Get the UTF-16 length out of the data itself. + + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t) (0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t) (0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); } + // TODO: Handle UTF-16 code points that take two entries. + } } // Count how many bytes a utf-16-le encoded string will take in utf-8. static int _count_utf8_bytes(const uint16_t *buf, size_t len) { - size_t total_bytes = 0; - for (size_t i = 0; i < len; i++) { - uint16_t chr = buf[i]; - if (chr < 0x80) { - total_bytes += 1; - } else if (chr < 0x800) { - total_bytes += 2; - } else { - total_bytes += 3; - } - // TODO: Handle UTF-16 code points that take two entries. + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; } - return (int) total_bytes; + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { - if ((temp_buf[0] & 0xff) == 0) return; // empty - size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); - size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); - _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); - ((uint8_t*) temp_buf)[utf8_len] = '\0'; + if ((temp_buf[0] & 0xff) == 0) return;// empty + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t *) temp_buf)[utf8_len] = '\0'; - printf("%s", (char*)temp_buf); + printf("%s", (char *) temp_buf); } diff --git a/src/host/hcd.h b/src/host/hcd.h index 56b6fdb5d..aa9e9cf3b 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -165,6 +165,9 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); // Open an endpoint bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); +// Close an endpoint +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); + // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); diff --git a/src/host/usbh.c b/src/host/usbh.c index 308916c9b..5925a7be0 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -994,6 +994,12 @@ bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const* desc_ep) { return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr) { + TU_VERIFY(0 != tu_edpt_number(ep_addr)); // cannot close EP0 + tuh_edpt_abort_xfer(daddr, ep_addr); // abort any pending transfer + return hcd_edpt_close(usbh_get_rhport(daddr), daddr, ep_addr); +} + bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev); diff --git a/src/host/usbh.h b/src/host/usbh.h index d95bb9b57..4829a8183 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -33,6 +33,10 @@ #include "common/tusb_common.h" +#if CFG_TUH_MAX3421 +#include "portable/analog/max3421/hcd_max3421.h" +#endif + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -227,6 +231,9 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer); // Open a non-control endpoint bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); +// Close a non-control endpoint, it will abort any pending transfer +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr); + // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index c5e924266..3fbf950a4 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -252,28 +252,6 @@ static tuh_configure_max3421_t _tuh_cfg = { .pinctl = 0, // default: negative edge interrupt }; -//--------------------------------------------------------------------+ -// API: SPI transfer with MAX3421E -// - spi_cs_api(), spi_xfer_api(), int_api(): must be implemented by application -// - reg_read(), reg_write(): is implemented by this driver, can be used by application -//--------------------------------------------------------------------+ - -// API to control MAX3421 SPI CS -extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); - -// API to transfer data with MAX3421 SPI -// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only -extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); - -// API to enable/disable MAX3421 INTR pin interrupt -extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); - -// API to read MAX3421's register. Implemented by TinyUSB -uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); - -// API to write MAX3421's register. Implemented by TinyUSB -bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); - //--------------------------------------------------------------------+ // SPI Commands and Helper //--------------------------------------------------------------------+ @@ -632,6 +610,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e if (daddr == 0 && ep_num == 0) { ep = &_hcd_data.ep[0]; }else { + if (NULL != find_ep_not_addr0(daddr, ep_num, ep_dir)) { + return false; // endpoint already opened + } ep = allocate_ep(); TU_ASSERT(ep); ep->daddr = daddr; @@ -645,6 +626,21 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const ep_dir = tu_edpt_dir(ep_addr); + max3421_ep_t * ep = find_ep_not_addr0(daddr, ep_num, ep_dir); + + if (!ep) { + return false; // not opened + } + + tu_memclr(ep, sizeof(max3421_ep_t)); + + return true; +} + /* The microcontroller repeatedly writes the SNDFIFO register R2 to load the FIFO with up to 64 data bytes. * Then the microcontroller writes the SNDBC register, which this does three things: * 1. Tells the MAX3421E SIE (Serial Interface Engine) how many bytes in the FIFO to send. diff --git a/src/portable/analog/max3421/hcd_max3421.h b/src/portable/analog/max3421/hcd_max3421.h new file mode 100644 index 000000000..4631fa21a --- /dev/null +++ b/src/portable/analog/max3421/hcd_max3421.h @@ -0,0 +1,63 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_HCD_MAX3421_H +#define TUSB_HCD_MAX3421_H + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// SPI transfer API with MAX3421E are implemented by application +// - spi_cs_api(), spi_xfer_api(), int_api() +//--------------------------------------------------------------------+ + +// API to control MAX3421 SPI CS +extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); + +// API to enable/disable MAX3421 INTR pin interrupt +extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); + +//--------------------------------------------------------------------+ +// API for read/write MAX3421 registers +// are implemented by this driver, can be used by application +//--------------------------------------------------------------------+ + +// API to read MAX3421's register. Implemented by TinyUSB +uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); + +// API to write MAX3421's register. Implemented by TinyUSB +bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 6422afff1..225a44dcf 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -122,6 +122,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const *) desc_ep, need_pre); } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + uint8_t const pio_rhport = RHPORT_PIO(rhport); + return pio_usb_host_endpoint_close(pio_rhport, daddr, ep_addr); +} + bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen); diff --git a/tools/get_deps.py b/tools/get_deps.py index 3f529bd7e..ba9dc23ce 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -58,8 +58,8 @@ deps_optional = { 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], - 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - '0ca3657d55ea20e7fa4483bbd21ce951bc1d6fa5', + 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', + '810653f66adadba3e0e4b4b56d5167ac4f7fdbf7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1 From 4787cd5f546eabad630fc5c22f37f67a076ac37e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Apr 2025 18:11:33 +0700 Subject: fix(hcd) hcd_edpt_open() return true if endpoint is already opened. --- examples/host/device_info/src/main.c | 31 ++++++++++++++++++++----------- src/host/hcd.h | 1 + src/portable/analog/max3421/hcd_max3421.c | 2 +- src/portable/ehci/ehci.c | 4 +++- 4 files changed, 25 insertions(+), 13 deletions(-) (limited to 'src/host/hcd.h') diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index ac4c46a11..e924a137b 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -124,13 +124,18 @@ void tuh_mount_cb(uint8_t daddr) { } printf("Device %u: ID %04x:%04x SN ", daddr, desc.device.idVendor, desc.device.idProduct); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, desc.serial, sizeof(desc.serial)); + + xfer_result = XFER_RESULT_FAILED; + if (desc.device.iSerialNumber != 0) { + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, desc.serial, sizeof(desc.serial)); + } if (XFER_RESULT_SUCCESS != xfer_result) { uint16_t* serial = (uint16_t*)(uintptr_t) desc.serial; - serial[0] = 'n'; - serial[1] = '/'; - serial[2] = 'a'; - serial[3] = 0; + serial[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * 3 + 2)); + serial[1] = 'n'; + serial[2] = '/'; + serial[3] = 'a'; + serial[4] = 0; } print_utf16((uint16_t*)(uintptr_t) desc.serial, sizeof(desc.serial)/2); printf("\r\n"); @@ -150,16 +155,20 @@ void tuh_mount_cb(uint8_t daddr) { // Get String descriptor using Sync API printf(" iManufacturer %u ", desc.device.iManufacturer); - xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + if (desc.device.iManufacturer != 0) { + xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + } } printf("\r\n"); printf(" iProduct %u ", desc.device.iProduct); - xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + if (desc.device.iProduct != 0) { + xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + } } printf("\r\n"); diff --git a/src/host/hcd.h b/src/host/hcd.h index aa9e9cf3b..b20d96d54 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -163,6 +163,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); //--------------------------------------------------------------------+ // Open an endpoint +// return true if successfully opened or endpoint is currently opened bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); // Close an endpoint diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 3fbf950a4..bb33200f2 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -611,7 +611,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e ep = &_hcd_data.ep[0]; }else { if (NULL != find_ep_not_addr0(daddr, ep_num, ep_dir)) { - return false; // endpoint already opened + return true; // already opened } ep = allocate_ep(); TU_ASSERT(ep); diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 292a352fb..7451f69a3 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -381,7 +381,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const if (ep_desc->bEndpointAddress == 0) { p_qhd = qhd_control(dev_addr); } else { - TU_VERIFY(NULL == qhd_get_from_addr(dev_addr, ep_desc->bEndpointAddress)); // ep not opened yet + if (NULL != qhd_get_from_addr(dev_addr, ep_desc->bEndpointAddress)) { + return true; // already opened + } p_qhd = qhd_find_free(); } TU_ASSERT(p_qhd); -- cgit v1.3.1