From c37a9571741cef0dcf0cd5a77e202ae741a2dd42 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Jul 2023 19:56:48 +0700 Subject: correct hcd_edpt_clear_stall() API signature --- src/host/hcd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/host/hcd.h') diff --git a/src/host/hcd.h b/src/host/hcd.h index 50f1dcdcc..898e0c6a4 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -179,7 +179,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr); +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); //--------------------------------------------------------------------+ // USBH implemented API -- cgit v1.3.1 From 10575c1b380136ce9381393c33e982cea7ef4731 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Jul 2023 20:48:18 +0700 Subject: mising ehci --- src/host/hcd.h | 2 +- src/portable/ehci/ehci.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'src/host/hcd.h') diff --git a/src/host/hcd.h b/src/host/hcd.h index 898e0c6a4..d77dd6e2f 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -179,7 +179,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); //--------------------------------------------------------------------+ // USBH implemented API diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 241393a39..979069cfa 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -502,8 +502,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return still_active; // true if removed an active transfer } -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; ehci_qhd_t *qhd = qhd_get_from_addr(daddr, ep_addr); qhd->qtd_overlay.halted = 0; hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); -- cgit v1.3.1 From 1f95a417f271e627ec981be3d211eed8c37cb052 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 7 Aug 2023 18:22:28 +0700 Subject: Add tuh_rhport_is_active() and tuh_rhport_reset_bus() - also improve ehci bus reset - seperate bus reset delay and contact debouncing delay in enumeration --- src/host/hcd.h | 5 +- src/host/hub.c | 2 +- src/host/usbh.c | 118 +++++++++++++++++--------------- src/host/usbh.h | 39 ++++++----- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 43 ++++++------ src/portable/ehci/ehci.c | 24 +++++-- 6 files changed, 128 insertions(+), 103 deletions(-) (limited to 'src/host/hcd.h') diff --git a/src/host/hcd.h b/src/host/hcd.h index d77dd6e2f..9bcc1c6df 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -149,10 +149,11 @@ uint32_t hcd_frame_number(uint8_t rhport); // Get the current connect status of roothub port bool hcd_port_connect_status(uint8_t rhport); -// Reset USB bus on the port +// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. +// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. void hcd_port_reset(uint8_t rhport); -// TODO implement later +// Complete bus reset sequence, may be required by some controllers void hcd_port_reset_end(uint8_t rhport); // Get port link speed diff --git a/src/host/hub.c b/src/host/hub.c index 16dd534d2..ec30eb96a 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -330,7 +330,7 @@ static void connection_port_reset_complete (tuh_xfer_t* xfer); bool hub_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) xferred_bytes; // TODO can be more than 1 for hub with lots of ports (void) ep_addr; - TU_ASSERT(result == XFER_RESULT_SUCCESS); + TU_VERIFY(result == XFER_RESULT_SUCCESS); hub_interface_t* p_hub = get_itf(dev_addr); diff --git a/src/host/usbh.c b/src/host/usbh.c index 49f8c78f1..cc7e38b45 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -181,9 +181,6 @@ static usbh_class_driver_t const usbh_class_drivers[] = }; enum { USBH_CLASS_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; - -enum { RESET_DELAY = 500 }; // 200 USB specs say only 50ms but many devices require much longer - enum { CONFIG_NUM = 1 }; // default to use configuration 1 @@ -251,40 +248,27 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t #if CFG_TUSB_OS == OPT_OS_NONE // TODO rework time-related function later -TU_ATTR_WEAK void osal_task_delay(uint32_t msec) -{ +// weak and overridable +TU_ATTR_WEAK void osal_task_delay(uint32_t msec) { const uint32_t start = hcd_frame_number(_usbh_controller); while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {} } #endif //--------------------------------------------------------------------+ -// PUBLIC API (Parameter Verification is required) +// Device API //--------------------------------------------------------------------+ -bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) -{ - if (hcd_configure) - { - return hcd_configure(rhport, cfg_id, cfg_param); - }else - { - return false; - } -} - -bool tuh_mounted(uint8_t dev_addr) -{ - usbh_device_t* dev = get_device(dev_addr); +bool tuh_mounted(uint8_t dev_addr) { + usbh_device_t *dev = get_device(dev_addr); TU_VERIFY(dev); return dev->configured; } -bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t* vid, uint16_t* pid) -{ +bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t *vid, uint16_t *pid) { *vid = *pid = 0; - usbh_device_t const* dev = get_device(dev_addr); + usbh_device_t const *dev = get_device(dev_addr); TU_VERIFY(dev && dev->addressed && dev->vid != 0); *vid = dev->vid; @@ -293,26 +277,48 @@ bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t* vid, uint16_t* pid) return true; } -tusb_speed_t tuh_speed_get (uint8_t dev_addr) -{ - usbh_device_t* dev = get_device(dev_addr); +tusb_speed_t tuh_speed_get(uint8_t dev_addr) { + usbh_device_t *dev = get_device(dev_addr); return (tusb_speed_t) (dev ? get_device(dev_addr)->speed : _dev0.speed); } -static void clear_device(usbh_device_t* dev) -{ +bool tuh_rhport_is_active(uint8_t rhport) { + return _usbh_controller == rhport; +} + +bool tuh_rhport_reset_bus(uint8_t rhport, bool active) { + TU_VERIFY(tuh_rhport_is_active(rhport)); + if ( active ) { + hcd_port_reset(rhport); + } else { + hcd_port_reset_end(rhport); + } + return true; +} + +//--------------------------------------------------------------------+ +// PUBLIC API (Parameter Verification is required) +//--------------------------------------------------------------------+ + +bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { + if ( hcd_configure ) { + return hcd_configure(rhport, cfg_id, cfg_param); + } else { + return false; + } +} + +static void clear_device(usbh_device_t* dev) { tu_memclr(dev, sizeof(usbh_device_t)); memset(dev->itf2drv, TUSB_INDEX_INVALID_8, sizeof(dev->itf2drv)); // invalid mapping memset(dev->ep2drv , TUSB_INDEX_INVALID_8, sizeof(dev->ep2drv )); // invalid mapping } -bool tuh_inited(void) -{ +bool tuh_inited(void) { return _usbh_controller != TUSB_INDEX_INVALID_8; } -bool tuh_init(uint8_t controller_id) -{ +bool tuh_init(uint8_t controller_id) { // skip if already initialized if ( tuh_inited() ) return true; @@ -359,8 +365,7 @@ bool tuh_init(uint8_t controller_id) return true; } -bool tuh_task_event_ready(void) -{ +bool tuh_task_event_ready(void) { // Skip if stack is not initialized if ( !tuh_inited() ) return false; @@ -385,8 +390,7 @@ bool tuh_task_event_ready(void) } @endcode */ -void tuh_task_ext(uint32_t timeout_ms, bool in_isr) -{ +void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { (void) in_isr; // not implemented yet // Skip if stack is not initialized @@ -403,8 +407,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) case HCD_EVENT_DEVICE_ATTACH: // due to the shared _usbh_ctrl_buf, we must complete enumerating // one device before enumerating another one. - if ( _dev0.enumerating ) - { + if ( _dev0.enumerating ) { TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); bool is_empty = osal_queue_empty(_usbh_q); @@ -414,8 +417,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) // Exit if this is the only event in the queue, otherwise we may loop forever return; } - }else - { + }else { TU_LOG_USBH("[%u:] USBH DEVICE ATTACH\r\n", event.rhport); _dev0.enumerating = 1; enum_new_device(&event); @@ -428,8 +430,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) #if CFG_TUH_HUB // TODO remove - if ( event.connection.hub_addr != 0) - { + if ( event.connection.hub_addr != 0) { // done with hub, waiting for next data on status pipe (void) hub_edpt_status_xfer( event.connection.hub_addr ); } @@ -1230,6 +1231,12 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu // one device before enumerating another one. //--------------------------------------------------------------------+ +enum { + ENUM_RESET_DELAY = 50, // USB specs: 10 to 50ms + ENUM_CONTACT_DEBOUNCING_DELAY = 450, // when plug/unplug a device, physical connection can be bouncing and may + // generate a series of attach/detach event. This delay wait for stable connection +}; + enum { ENUM_IDLE, ENUM_RESET_1, // 1st reset when attached @@ -1311,7 +1318,7 @@ static void process_enumeration(tuh_xfer_t* xfer) break; case ENUM_HUB_GET_STATUS_2: - osal_task_delay(RESET_DELAY); + osal_task_delay(ENUM_RESET_DELAY); TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, process_enumeration, ENUM_HUB_CLEAR_RESET_2), ); break; @@ -1468,12 +1475,14 @@ static bool enum_new_device(hcd_event_t* event) if (_dev0.hub_addr == 0) { // connected/disconnected directly with roothub - // wait until device is stable TODO non blocking hcd_port_reset(_dev0.rhport); - osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since - // sof of controller may not running while resetting + osal_task_delay(ENUM_RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since + // sof of controller may not running while resetting hcd_port_reset_end( _dev0.rhport); + // wait until device connection is stable TODO non blocking + osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); + // device unplugged while delaying if ( !hcd_port_connect_status(_dev0.rhport) ) { enum_full_complete(); @@ -1489,6 +1498,7 @@ static bool enum_new_device(hcd_event_t* event) xfer.result = XFER_RESULT_SUCCESS; xfer.user_data = ENUM_ADDR0_DEVICE_DESC; + process_enumeration(&xfer); } @@ -1496,8 +1506,8 @@ static bool enum_new_device(hcd_event_t* event) else { // connected/disconnected via external hub - // wait until device is stable - osal_task_delay(RESET_DELAY); + // wait until device connection is stable TODO non blocking + osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); // ENUM_HUB_GET_STATUS //TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, enum_hub_get_status0_complete, 0) ); @@ -1508,23 +1518,19 @@ static bool enum_new_device(hcd_event_t* event) return true; } -static uint8_t get_new_address(bool is_hub) -{ +static uint8_t get_new_address(bool is_hub) { uint8_t start; uint8_t end; - if ( is_hub ) - { + if ( is_hub ) { start = CFG_TUH_DEVICE_MAX; end = start + CFG_TUH_HUB; - }else - { + }else { start = 0; end = start + CFG_TUH_DEVICE_MAX; } - for (uint8_t idx = start; idx < end; idx++) - { + for (uint8_t idx = start; idx < end; idx++) { if (!_usbh_devices[idx].connected) return (idx+1); } diff --git a/src/host/usbh.h b/src/host/usbh.h index 0d56f40c9..684e8240e 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -47,8 +47,7 @@ typedef void (*tuh_xfer_cb_t)(tuh_xfer_t* xfer); // it is advised to initialize it using member name // Note2: not all field is available/meaningful in callback, // some info is not saved by usbh to save SRAM -struct tuh_xfer_s -{ +struct tuh_xfer_s { uint8_t daddr; uint8_t ep_addr; uint8_t TU_RESERVED; // reserved @@ -56,8 +55,7 @@ struct tuh_xfer_s uint32_t actual_len; // excluding setup packet - union - { + union { tusb_control_request_t const* setup; // setup packet pointer if control transfer uint32_t buflen; // expected length if not control transfer (not available in callback) }; @@ -70,15 +68,13 @@ struct tuh_xfer_s }; // Subject to change -typedef struct -{ +typedef struct { uint8_t daddr; tusb_desc_interface_t desc; } tuh_itf_info_t; // ConfigID for tuh_config() -enum -{ +enum { TUH_CFGID_RPI_PIO_USB_CONFIGURATION = OPT_MCU_RP2040 << 8 // cfg_param: pio_usb_configuration_t }; @@ -105,12 +101,12 @@ TU_ATTR_WEAK void tuh_umount_cb(uint8_t daddr); // Should be called before tuh_init() // - cfg_id : configure ID (TBD) // - cfg_param: configure data, structure depends on the ID -bool tuh_configure(uint8_t controller_id, uint32_t cfg_id, const void* cfg_param); +bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Init host stack -bool tuh_init(uint8_t controller_id); +bool tuh_init(uint8_t rhport); -// Check if host stack is already initialized +// Check if host stack is already initialized with any roothub ports bool tuh_inited(void); // Task function should be called in main/rtos loop, extended version of tuh_task() @@ -120,8 +116,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr); // Task function should be called in main/rtos loop TU_ATTR_ALWAYS_INLINE static inline -void tuh_task(void) -{ +void tuh_task(void) { tuh_task_ext(UINT32_MAX, false); } @@ -135,8 +130,20 @@ extern void hcd_int_handler(uint8_t rhport); // Interrupt handler, name alias to HCD #define tuh_int_handler hcd_int_handler +// Check if roothub port is initialized and active as a host +bool tuh_rhport_is_active(uint8_t rhport); + +// Assert/de-assert Bus Reset signal to roothub port. USB specs: it should last 10-50ms +bool tuh_rhport_reset_bus(uint8_t rhport, bool active); + +//--------------------------------------------------------------------+ +// Device API +//--------------------------------------------------------------------+ + +// Get VID/PID of device bool tuh_vid_pid_get(uint8_t daddr, uint16_t* vid, uint16_t* pid); +// Get speed of device tusb_speed_t tuh_speed_get(uint8_t daddr); // Check if device is connected and configured @@ -144,8 +151,7 @@ bool tuh_mounted(uint8_t daddr); // Check if device is suspended TU_ATTR_ALWAYS_INLINE static inline -bool tuh_suspended(uint8_t daddr) -{ +bool tuh_suspended(uint8_t daddr) { // TODO implement suspend & resume on host (void) daddr; return false; @@ -153,8 +159,7 @@ bool tuh_suspended(uint8_t daddr) // Check if device is ready to communicate with TU_ATTR_ALWAYS_INLINE static inline -bool tuh_ready(uint8_t daddr) -{ +bool tuh_ready(uint8_t daddr) { return tuh_mounted(daddr) && !tuh_suspended(daddr); } diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 6ee91e18e..462cbd301 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -39,24 +39,27 @@ #include "ci_hs_type.h" #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX - #include "ci_hs_imxrt.h" - bool hcd_dcache_clean(void const* addr, uint32_t data_size) { - return imxrt_dcache_clean(addr, data_size); - } +#include "ci_hs_imxrt.h" - bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { - return imxrt_dcache_invalidate(addr, data_size); - } +bool hcd_dcache_clean(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean(addr, data_size); +} + +bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_invalidate(addr, data_size); +} - bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - return imxrt_dcache_clean_invalidate(addr, data_size); - } +bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean_invalidate(addr, data_size); +} #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) - #include "ci_hs_lpc18_43.h" + +#include "ci_hs_lpc18_43.h" + #else - #error "Unsupported MCUs" +#error "Unsupported MCUs" #endif //--------------------------------------------------------------------+ @@ -67,25 +70,25 @@ // Controller API //--------------------------------------------------------------------+ -bool hcd_init(uint8_t rhport) -{ - ci_hs_regs_t* hcd_reg = CI_HS_REG(rhport); +bool hcd_init(uint8_t rhport) { + ci_hs_regs_t *hcd_reg = CI_HS_REG(rhport); // Reset controller hcd_reg->USBCMD |= USBCMD_RESET; - while( hcd_reg->USBCMD & USBCMD_RESET ) {} + while ( hcd_reg->USBCMD & USBCMD_RESET ) {} // Set mode to device, must be set immediately after reset #if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX // LPC18XX/43XX need to set VBUS Power Select to HIGH // RHPORT1 is fullspeed only (need external PHY for Highspeed) hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT; - if (rhport == 1) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; + if ( rhport == 1 ) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; #else hcd_reg->USBMODE = USBMODE_CM_HOST; #endif // FIXME force full speed, still have issue with Highspeed enumeration + // probably due to physical connection bouncing when plug/unplug // 1. Have issue when plug/unplug devices, maybe the port is not reset properly // 2. Also does not seems to detect disconnection hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; @@ -93,13 +96,11 @@ bool hcd_init(uint8_t rhport) return ehci_init(rhport, (uint32_t) &hcd_reg->CAPLENGTH, (uint32_t) &hcd_reg->USBCMD); } -void hcd_int_enable(uint8_t rhport) -{ +void hcd_int_enable(uint8_t rhport) { CI_HCD_INT_ENABLE(rhport); } -void hcd_int_disable(uint8_t rhport) -{ +void hcd_int_disable(uint8_t rhport) { CI_HCD_INT_DISABLE(rhport); } diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 9be24c888..79811985c 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -188,6 +188,11 @@ void hcd_port_reset(uint8_t rhport) ehci_registers_t* regs = ehci_data.regs; + // skip if already in reset + if (regs->portsc_bm.port_reset) { + return; + } + // mask out Write-1-to-Clear bits uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_W1C; @@ -202,16 +207,18 @@ void hcd_port_reset(uint8_t rhport) void hcd_port_reset_end(uint8_t rhport) { (void) rhport; - -#if 0 // TODO check if this is necessary ehci_registers_t* regs = ehci_data.regs; + // skip if reset is already complete + if (!regs->portsc_bm.port_reset) { + return; + } + // mask out all change bits since they are Write 1 to clear - uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_CHANGE_ALL; - portsc &= ~(EHCI_PORTSC_MASK_PORT_RESET); + uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_W1C; + portsc &= ~EHCI_PORTSC_MASK_PORT_RESET; regs->portsc = portsc; -#endif } bool hcd_port_connect_status(uint8_t rhport) @@ -426,6 +433,11 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet hcd_dcache_clean(setup_packet, 8); + // Control endpoint never be stalled. Skip reset Data Toggle since it is fixed per stage + if (qhd->qtd_overlay.halted) { + qhd->qtd_overlay.halted = false; + } + // attach TD to QHD -> start transferring qhd_attach_qtd(qhd, td); @@ -662,7 +674,7 @@ void hcd_int_handler(uint8_t rhport) if (int_status & EHCI_INT_MASK_PORT_CHANGE) { // Including: Force port resume, over-current change, enable/disable change and connect status change. uint32_t const port_status = regs->portsc & EHCI_PORTSC_MASK_W1C; - print_portsc(regs); + // print_portsc(regs); if (regs->portsc_bm.connect_status_change) { port_connect_status_change_isr(rhport); -- cgit v1.3.1 From 9257a0f562a1cb939a902e7c41de5032b0f7de19 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 18 Aug 2023 12:48:12 +0700 Subject: - update nrf52 bsp for cmake - add empty tuh_int_handler/tud_int_handler if corresponidng stack not enabled - add hcd_template.c --- hw/bsp/nrf/boards/adafruit_clue/board.cmake | 5 + hw/bsp/nrf/boards/arduino_nano33_ble/board.cmake | 5 + .../boards/circuitplayground_bluefruit/board.cmake | 5 + .../boards/feather_nrf52840_express/board.cmake | 6 + .../nrf/boards/feather_nrf52840_sense/board.cmake | 5 + hw/bsp/nrf/boards/itsybitsy_nrf52840/board.cmake | 5 + hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.cmake | 5 + hw/bsp/nrf/boards/pca10056/board.cmake | 3 - hw/bsp/nrf/boards/pca10059/board.cmake | 5 + hw/bsp/nrf/boards/pca10095/board.cmake | 4 - hw/bsp/nrf/boards/pca10100/board.cmake | 5 + hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake | 5 + hw/bsp/nrf/family.cmake | 14 +- src/device/usbd.h | 6 +- src/host/hcd.h | 12 +- src/portable/template/dcd_template.c | 4 +- src/portable/template/hcd_template.c | 162 +++++++++++++++++++++ src/tusb.h | 9 +- 18 files changed, 241 insertions(+), 24 deletions(-) create mode 100644 hw/bsp/nrf/boards/adafruit_clue/board.cmake create mode 100644 hw/bsp/nrf/boards/arduino_nano33_ble/board.cmake create mode 100644 hw/bsp/nrf/boards/circuitplayground_bluefruit/board.cmake create mode 100644 hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake create mode 100644 hw/bsp/nrf/boards/feather_nrf52840_sense/board.cmake create mode 100644 hw/bsp/nrf/boards/itsybitsy_nrf52840/board.cmake create mode 100644 hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.cmake create mode 100644 hw/bsp/nrf/boards/pca10059/board.cmake create mode 100644 hw/bsp/nrf/boards/pca10100/board.cmake create mode 100644 hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake create mode 100644 src/portable/template/hcd_template.c (limited to 'src/host/hcd.h') diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.cmake b/hw/bsp/nrf/boards/adafruit_clue/board.cmake new file mode 100644 index 000000000..eb97e5c55 --- /dev/null +++ b/hw/bsp/nrf/boards/adafruit_clue/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/board.cmake b/hw/bsp/nrf/boards/arduino_nano33_ble/board.cmake new file mode 100644 index 000000000..93647063a --- /dev/null +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/arduino_nano33_ble.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.cmake b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.cmake new file mode 100644 index 000000000..eb97e5c55 --- /dev/null +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake new file mode 100644 index 000000000..0acbecf7a --- /dev/null +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake @@ -0,0 +1,6 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) +# set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.cmake b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.cmake new file mode 100644 index 000000000..eb97e5c55 --- /dev/null +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.cmake b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.cmake new file mode 100644 index 000000000..eb97e5c55 --- /dev/null +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.cmake b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.cmake new file mode 100644 index 000000000..ffa5932c1 --- /dev/null +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/nrf52840_mdk_dongle.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/pca10056/board.cmake b/hw/bsp/nrf/boards/pca10056/board.cmake index b4fe39fc0..693d7beed 100644 --- a/hw/bsp/nrf/boards/pca10056/board.cmake +++ b/hw/bsp/nrf/boards/pca10056/board.cmake @@ -2,7 +2,4 @@ set(MCU_VARIANT nrf52840) set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - NRF52840_XXAA - ) endfunction() diff --git a/hw/bsp/nrf/boards/pca10059/board.cmake b/hw/bsp/nrf/boards/pca10059/board.cmake new file mode 100644 index 000000000..c79eb5964 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10059/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/pca10059.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index 1e72243c9..ca5399a3a 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -2,10 +2,6 @@ set(MCU_VARIANT nrf5340_application) set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - NRF5340_XXAA - NRF5340_XXAA_APPLICATION - ) target_sources(${TARGET} PRIVATE ${NRFX_DIR}/drivers/src/nrfx_usbreg.c ) diff --git a/hw/bsp/nrf/boards/pca10100/board.cmake b/hw/bsp/nrf/boards/pca10100/board.cmake new file mode 100644 index 000000000..c30026815 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10100/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52833) +set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52833_xxaa.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake new file mode 100644 index 000000000..693d7beed --- /dev/null +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake @@ -0,0 +1,5 @@ +set(MCU_VARIANT nrf52840) +set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 2b13249f4..6c24d3658 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -33,13 +33,20 @@ function(add_board_target BOARD_TARGET) add_library(${BOARD_TARGET} STATIC # driver ${NRFX_DIR}/drivers/src/nrfx_power.c + ${NRFX_DIR}/drivers/src/nrfx_spim.c ${NRFX_DIR}/drivers/src/nrfx_uarte.c # mcu ${NRFX_DIR}/mdk/system_${MCU_VARIANT}.c ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CONFIG_GPIO_AS_PINRESET - ) + target_compile_definitions(${BOARD_TARGET} PUBLIC CONFIG_GPIO_AS_PINRESET) + + if (MCU_VARIANT STREQUAL "nrf52840") + target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52840_XXAA) + elseif (MCU_VARIANT STREQUAL "nrf52833") + target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52833_XXAA) + elseif (MCU_VARIANT STREQUAL "nrf5340_application") + target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA NRF5340_XXAA_APPLICATION) + endif () if (TRACE_ETM STREQUAL "1") # ENABLE_TRACE will cause system_nrf5x.c to set up ETM trace @@ -115,6 +122,7 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c + #${TOP}/src/portable/analog/max3421e/hcd_max3421e.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/src/device/usbd.h b/src/device/usbd.h index b11c1a09d..782f538fd 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -50,8 +50,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr); // Task function should be called in main/rtos loop TU_ATTR_ALWAYS_INLINE static inline -void tud_task (void) -{ +void tud_task (void) { tud_task_ext(UINT32_MAX, false); } @@ -80,8 +79,7 @@ bool tud_suspended(void); // Check if device is ready to transfer TU_ATTR_ALWAYS_INLINE static inline -bool tud_ready(void) -{ +bool tud_ready(void) { return tud_mounted() && !tud_suspended(); } diff --git a/src/host/hcd.h b/src/host/hcd.h index 9bcc1c6df..1b5038ef4 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -198,8 +198,7 @@ extern void hcd_event_handler(hcd_event_t const* event, bool in_isr); // Helper to send device attach event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_device_attach(uint8_t rhport, bool in_isr) -{ +void hcd_event_device_attach(uint8_t rhport, bool in_isr) { hcd_event_t event; event.rhport = rhport; event.event_id = HCD_EVENT_DEVICE_ATTACH; @@ -211,8 +210,7 @@ void hcd_event_device_attach(uint8_t rhport, bool in_isr) // Helper to send device removal event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_device_remove(uint8_t rhport, bool in_isr) -{ +void hcd_event_device_remove(uint8_t rhport, bool in_isr) { hcd_event_t event; event.rhport = rhport; event.event_id = HCD_EVENT_DEVICE_REMOVE; @@ -224,10 +222,8 @@ void hcd_event_device_remove(uint8_t rhport, bool in_isr) // Helper to send USB transfer event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, uint32_t xferred_bytes, xfer_result_t result, bool in_isr) -{ - hcd_event_t event = - { +void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, uint32_t xferred_bytes, xfer_result_t result, bool in_isr) { + hcd_event_t event = { .rhport = 0, // TODO correct rhport .event_id = HCD_EVENT_XFER_COMPLETE, .dev_addr = dev_addr, diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c index 590dd9fcf..12d610bd6 100644 --- a/src/portable/template/dcd_template.c +++ b/src/portable/template/dcd_template.c @@ -26,7 +26,7 @@ #include "tusb_option.h" -#if CFG_TUSB_MCU == OPT_MCU_NONE +#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_NONE #include "device/dcd.h" @@ -141,4 +141,6 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) (void) ep_addr; } + + #endif diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c new file mode 100644 index 000000000..3e3b91558 --- /dev/null +++ b/src/portable/template/hcd_template.c @@ -0,0 +1,162 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && CFG_TUSB_MCU == OPT_MCU_NONE + +#include "host/hcd.h" + +//--------------------------------------------------------------------+ +// Controller API +//--------------------------------------------------------------------+ + +// optional hcd configuration, called by tuh_configure() +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + + return false; +} + +// Initialize controller to host mode +bool hcd_init(uint8_t rhport) { + (void) rhport; + + return false; +} + +// Interrupt Handler +void hcd_int_handler(uint8_t rhport) { + (void) rhport; +} + +// Enable USB interrupt +void hcd_int_enable (uint8_t rhport) { + (void) rhport; +} + +// Disable USB interrupt +void hcd_int_disable(uint8_t rhport) { + (void) rhport; +} + +// Get frame number (1ms) +uint32_t hcd_frame_number(uint8_t rhport) { + (void) rhport; + + return 0; +} + +//--------------------------------------------------------------------+ +// Port API +//--------------------------------------------------------------------+ + +// Get the current connect status of roothub port +bool hcd_port_connect_status(uint8_t rhport) { + (void) rhport; + + return false; +} + +// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. +// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. +void hcd_port_reset(uint8_t rhport) { + (void) rhport; +} + +// Complete bus reset sequence, may be required by some controllers +void hcd_port_reset_end(uint8_t rhport) { + (void) rhport; +} + +// Get port link speed +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { + (void) rhport; + + return TUSB_SPEED_FULL; +} + +// HCD closes all opened endpoints belong to this device +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { + (void) rhport; + (void) dev_addr; +} + +//--------------------------------------------------------------------+ +// Endpoints API +//--------------------------------------------------------------------+ + +// Open an endpoint +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { + (void) rhport; + (void) dev_addr; + (void) ep_desc; + + return false; +} + +// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + (void) buffer; + (void) buflen; + + return false; +} + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { + (void) rhport; + (void) dev_addr; + (void) setup_packet; + + return false; +} + +// clear stall, data toggle is also reset to DATA0 +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +#endif diff --git a/src/tusb.h b/src/tusb.h index 37a521fa8..d6534ca28 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -64,7 +64,10 @@ #if CFG_TUH_VENDOR #include "class/vendor/vendor_host.h" #endif - +#else + #ifndef tuh_int_handler + #define tuh_int_handler(_x) + #endif #endif //------------- DEVICE -------------// @@ -118,6 +121,10 @@ #if CFG_TUD_BTH #include "class/bth/bth_device.h" #endif +#else + #ifndef tud_int_handler + #define tud_int_handler(_x) + #endif #endif -- cgit v1.3.1 From 274578ff46c31b231b3553dc9a20895646313130 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 22 Aug 2023 23:17:12 +0700 Subject: able to send setup packet --- hw/bsp/nrf/boards/feather_nrf52840_express/board.h | 8 +- hw/bsp/nrf/family.c | 36 ++++- src/host/hcd.h | 2 +- src/host/usbh.c | 32 ++-- src/portable/analog/max3421e/hcd_max3421e.c | 173 ++++++++++++++++----- 5 files changed, 179 insertions(+), 72 deletions(-) (limited to 'src/host/hcd.h') diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 7f042142e..e6e7590ac 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -46,10 +46,10 @@ #define UART_TX_PIN 25 // SPI for USB host shield -#define SPI_SCK_PIN 14 -#define SPI_MOSI_PIN 13 -#define SPI_MISO_PIN 15 -#define SPI_CS_PIN 27 +#define MAX3421E_SCK_PIN 14 +#define MAX3421E_MOSI_PIN 13 +#define MAX3421E_MISO_PIN 15 +#define MAX3421E_CS_PIN 27 #define MAX3241E_INTR_PIN 26 #ifdef __cplusplus diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index e58ee845b..862f67bc7 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -96,22 +96,38 @@ TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) { #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421E) && CFG_TUH_MAX3421E static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(0); -void max2342e_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { +void max3421e_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { if ( !(pin == MAX3241E_INTR_PIN && action == NRF_GPIOTE_POLARITY_HITOLO) ) return; tuh_int_handler(1); } +static inline void max3421e_cs_assert(bool active) { + nrf_gpio_pin_write(MAX3421E_CS_PIN, active ? 0 : 1); +} + +//--------------------------------------------------------------------+ // API: SPI transfer with MAX3421E, must be implemented by application -bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, uint8_t * rx_buf, size_t rx_len) { +//--------------------------------------------------------------------+ + +bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, + uint8_t * rx_buf, size_t rx_len, bool keep_cs) { (void) rhport; + + max3421e_cs_assert(true); + nrfx_spim_xfer_desc_t xfer = { .p_tx_buffer = tx_buf, .tx_length = tx_len, .p_rx_buffer = rx_buf, .rx_length = rx_len, }; - return nrfx_spim_xfer(&_spi, &xfer, 0) == NRFX_SUCCESS; + + bool ret = (nrfx_spim_xfer(&_spi, &xfer, 0) == NRFX_SUCCESS); + + if ( !keep_cs ) max3421e_cs_assert(false); + + return ret; } #endif @@ -203,12 +219,16 @@ void board_init(void) { #endif #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421E) && CFG_TUH_MAX3421E + // manually manage CS + nrf_gpio_cfg_output(MAX3421E_CS_PIN); + max3421e_cs_assert(false); + // USB host using max3421e usb controller via SPI nrfx_spim_config_t cfg = { - .sck_pin = SPI_SCK_PIN, - .mosi_pin = SPI_MOSI_PIN, - .miso_pin = SPI_MISO_PIN, - .ss_pin = SPI_CS_PIN, + .sck_pin = MAX3421E_SCK_PIN, + .mosi_pin = MAX3421E_MOSI_PIN, + .miso_pin = MAX3421E_MISO_PIN, + .ss_pin = NRFX_SPIM_PIN_NOT_USED, .ss_active_high = false, .irq_priority = 3, .orc = 0xFF, @@ -226,7 +246,7 @@ void board_init(void) { nrfx_gpiote_in_config_t in_config = NRFX_GPIOTE_CONFIG_IN_SENSE_HITOLO(true); in_config.pull = NRF_GPIO_PIN_PULLUP; - nrfx_gpiote_in_init(MAX3241E_INTR_PIN, &in_config, max2342e_int_handler); + nrfx_gpiote_in_init(MAX3241E_INTR_PIN, &in_config, max3421e_int_handler); nrfx_gpiote_in_event_enable(MAX3241E_INTR_PIN, true); #endif diff --git a/src/host/hcd.h b/src/host/hcd.h index 1b5038ef4..079877b79 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -177,7 +177,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); +bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); diff --git a/src/host/usbh.c b/src/host/usbh.c index 5423df669..7a09f5b6e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -552,8 +552,7 @@ static void _control_blocking_complete_cb(tuh_xfer_t* xfer) } // TODO timeout_ms is not supported yet -bool tuh_control_xfer (tuh_xfer_t* xfer) -{ +bool tuh_control_xfer (tuh_xfer_t* xfer) { // EP0 with setup packet TU_VERIFY(xfer->ep_addr == 0 && xfer->setup); @@ -565,8 +564,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) (void) osal_mutex_lock(_usbh_mutex, OSAL_TIMEOUT_WAIT_FOREVER); bool const is_idle = (_ctrl_xfer.stage == CONTROL_STAGE_IDLE); - if (is_idle) - { + if (is_idle) { _ctrl_xfer.stage = CONTROL_STAGE_SETUP; _ctrl_xfer.daddr = daddr; _ctrl_xfer.actual_len = 0; @@ -588,11 +586,9 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) TU_LOG_PTR(CFG_TUH_LOG_LEVEL, xfer->setup); TU_LOG_USBH("\r\n"); - if (xfer->complete_cb) - { + if (xfer->complete_cb) { TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t const*) &_ctrl_xfer.request) ); - }else - { + }else { // blocking if complete callback is not provided // change callback to internal blocking, and result as user argument volatile xfer_result_t result = XFER_RESULT_INVALID; @@ -656,15 +652,13 @@ static void _xfer_complete(uint8_t daddr, xfer_result_t result) } } -static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) -{ +static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) ep_addr; const uint8_t rhport = usbh_get_rhport(dev_addr); tusb_control_request_t const * request = &_ctrl_xfer.request; - if (XFER_RESULT_SUCCESS != result) - { + if (XFER_RESULT_SUCCESS != result) { TU_LOG1("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); #if CFG_TUSB_DEBUG == 1 TU_LOG1_PTR(request); @@ -673,13 +667,10 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result // terminate transfer if any stage failed _xfer_complete(dev_addr, result); - }else - { - switch(_ctrl_xfer.stage) - { + }else { + switch(_ctrl_xfer.stage) { case CONTROL_STAGE_SETUP: - if (request->wLength) - { + if (request->wLength) { // DATA stage: initial data toggle is always 1 _set_control_xfer_stage(CONTROL_STAGE_DATA); TU_ASSERT( hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength) ); @@ -688,8 +679,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result TU_ATTR_FALLTHROUGH; case CONTROL_STAGE_DATA: - if (request->wLength) - { + if (request->wLength) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, dev_addr); TU_LOG_MEM(CFG_TUH_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); } @@ -1538,9 +1528,7 @@ static bool enum_new_device(hcd_event_t* event) xfer.result = XFER_RESULT_SUCCESS; xfer.user_data = ENUM_ADDR0_DEVICE_DESC; - process_enumeration(&xfer); - } #if CFG_TUH_HUB else diff --git a/src/portable/analog/max3421e/hcd_max3421e.c b/src/portable/analog/max3421e/hcd_max3421e.c index 870c616a9..c9596f695 100644 --- a/src/portable/analog/max3421e/hcd_max3421e.c +++ b/src/portable/analog/max3421e/hcd_max3421e.c @@ -136,30 +136,64 @@ enum { HRSL_JSTATUS = 1u << 7, }; +enum { + HRSL_SUCCESS = 0, + HRSL_BUSY, + HRSL_BAD_REQ, + HRSL_UNDEF, + HRSL_NAK, + HRSL_STALL, + HRSL_TOG_ERR, + HRSL_WRONG_PID, + HRSL_BAD_BYTECOUNT, + HRSL_PID_ERR, + HRSL_PKT_ERR, + HRSL_CRC_ERR, + HRSL_K_ERR, + HRSL_J_ERR, + HRSL_TIMEOUT, + HRSL_BABBLE, +}; + + //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ typedef struct { + // cached register uint8_t mode; + uint8_t peraddr; + uint8_t hxfr; volatile uint16_t frame_count; + + struct { + uint16_t packet_size; + uint16_t total_len; + uint8_t xfer_type; + }ep[8][2]; } max2341e_data_t; static max2341e_data_t _hcd_data; //--------------------------------------------------------------------+ -// +// API: SPI transfer with MAX3421E, must be implemented by application //--------------------------------------------------------------------+ -// API: SPI transfer with MAX3421E, must be implemented by application -bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, uint8_t * rx_buf, size_t rx_len); +bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, + uint8_t * rx_buf, size_t rx_len, bool keep_cs); +//void tuh_max3421e_int_enable(uint8_t rhport, bool enabled); + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ // return HIRQ register since we are in full-duplex mode static uint8_t reg_write(uint8_t reg, uint8_t data) { uint8_t tx_buf[2] = {reg | CMDBYTE_WRITE, data}; uint8_t rx_buf[2] = {0, 0}; - tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2); + tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2, false); TU_LOG2("HIRQ: %02X\r\n", rx_buf[0]); return rx_buf[0]; } @@ -167,7 +201,7 @@ static uint8_t reg_write(uint8_t reg, uint8_t data) { static uint8_t reg_read(uint8_t reg) { uint8_t tx_buf[2] = {reg, 0}; uint8_t rx_buf[2] = {0, 0}; - return tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2) ? rx_buf[1] : 0; + return tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2, false) ? rx_buf[1] : 0; } static inline uint8_t mode_write(uint8_t data) { @@ -175,6 +209,24 @@ static inline uint8_t mode_write(uint8_t data) { return reg_write(MODE_ADDR, data); } +static inline uint8_t peraddr_write(uint8_t data) { + if ( _hcd_data.peraddr == data ) return 0; // no need to change address + + _hcd_data.peraddr = data; + return reg_write(PERADDR_ADDR, data); +} + +static inline uint8_t hxfr_write(uint8_t data) { + _hcd_data.hxfr = data; + return reg_write(HXFR_ADDR, data); +} + +static void fifo_write(uint8_t reg, uint8_t const * buffer, uint16_t len) { + uint8_t tx_buf[1] = {reg | CMDBYTE_WRITE}; + tuh_max3421e_spi_xfer_api(0, tx_buf, 1, NULL, 0, true); + tuh_max3421e_spi_xfer_api(0, buffer, len, NULL, 0, false); +} + //--------------------------------------------------------------------+ // Controller API @@ -252,7 +304,7 @@ bool hcd_init(uint8_t rhport) { mode_write(MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST); // Enable Connection IRQ - reg_write(HIEN_ADDR, HIRQ_CONDET_IRQ | HIRQ_FRAME_IRQ); + reg_write(HIEN_ADDR, HIRQ_CONDET_IRQ | HIRQ_FRAME_IRQ | HIRQ_HXFRDN_IRQ); #if 0 // Note: if device is already connected, CONDET IRQ may not be triggered. @@ -271,33 +323,6 @@ bool hcd_init(uint8_t rhport) { return true; } -// Interrupt Handler -void hcd_int_handler(uint8_t rhport) { - (void) rhport; - - uint8_t hirq = reg_read(HIRQ_ADDR); - TU_LOG3_HEX(hirq); - - if (hirq & HIRQ_CONDET_IRQ) { - tusb_speed_t speed = handle_connect_irq(rhport); - - if (speed == TUSB_SPEED_INVALID) { - hcd_event_device_remove(rhport, true); - }else { - hcd_event_device_attach(rhport, true); - } - } - - if (hirq & HIRQ_FRAME_IRQ) { - _hcd_data.frame_count++; - } - - // clear all interrupt - if ( hirq ) { - reg_write(HIRQ_ADDR, hirq); - } -} - // Enable USB interrupt void hcd_int_enable (uint8_t rhport) { (void) rhport; @@ -359,7 +384,12 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const (void) dev_addr; (void) ep_desc; - return false; + uint8_t ep_num = tu_edpt_number(ep_desc->bEndpointAddress); + uint8_t ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); + + _hcd_data.ep[ep_num][ep_dir].packet_size = tu_edpt_packet_size(ep_desc); + + return true; } // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked @@ -384,12 +414,18 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { } // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { +bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]) { (void) rhport; - (void) dev_addr; + (void) daddr; (void) setup_packet; - return false; + _hcd_data.ep[0][0].total_len = 8; + + peraddr_write(daddr); + fifo_write(SUDFIFO_ADDR, setup_packet, 8); + hxfr_write(HXFR_SETUP); + + return true; } // clear stall, data toggle is also reset to DATA0 @@ -401,4 +437,67 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return false; } +// Interrupt Handler +void hcd_int_handler(uint8_t rhport) { + uint8_t hirq = reg_read(HIRQ_ADDR); + TU_LOG3_HEX(hirq); + + if (hirq & HIRQ_CONDET_IRQ) { + tusb_speed_t speed = handle_connect_irq(rhport); + + if (speed == TUSB_SPEED_INVALID) { + hcd_event_device_remove(rhport, true); + }else { + hcd_event_device_attach(rhport, true); + } + } + + if (hirq & HIRQ_FRAME_IRQ) { + _hcd_data.frame_count++; + } + + if (hirq & HIRQ_HXFRDN_IRQ) { + uint8_t const hrsl = reg_read(HRSL_ADDR); + uint8_t const result = hrsl & HRSL_RESULT_MASK; + uint8_t xfer_result; + + TU_LOG3("HRSL: %02X\r\n", hrsl); + switch(result) { + case HRSL_SUCCESS: + xfer_result = XFER_RESULT_SUCCESS; + break; + + case HRSL_STALL: + xfer_result = XFER_RESULT_STALLED; + break; + + default: + xfer_result = XFER_RESULT_FAILED; + break; + } + + uint8_t ep_dir = 0; + uint8_t ep_num = _hcd_data.hxfr & HXFR_EPNUM_MASK; + uint8_t const xfer_type = _hcd_data.hxfr & 0xf0; + + if ( xfer_type & HXFR_SETUP ) { + // SETUP transfer + ep_dir = 0; + }else if ( !(xfer_type & HXFR_OUT_NIN) ) { + // IN transfer + ep_dir = 1; + } + + uint8_t const ep_addr = tu_edpt_addr(ep_num, ep_dir); + uint16_t xferred_len = _hcd_data.ep[ep_num][ep_dir].total_len; + + hcd_event_xfer_complete(_hcd_data.peraddr, ep_addr, xferred_len, xfer_result, true); + } + + // clear all interrupt + if ( hirq ) { + reg_write(HIRQ_ADDR, hirq); + } +} + #endif -- cgit v1.3.1 From e3f3179924f7c84c4bb3e69234720f9afc178727 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 23 Aug 2023 15:08:12 +0700 Subject: able to get 8 byte descriptor, but read(RCVBC) always return 0 - rename max3421e to max3421 - fix incorrect bitmask for HCTL, fix initial device connect - fix bus reset cause connect IRQ --- hw/bsp/nrf/family.c | 24 +- hw/bsp/nrf/family.cmake | 2 +- src/host/hcd.h | 2 +- src/portable/analog/max3421/hcd_max3421.c | 613 ++++++++++++++++++++++++++++ src/portable/analog/max3421e/hcd_max3421e.c | 503 ----------------------- 5 files changed, 624 insertions(+), 520 deletions(-) create mode 100644 src/portable/analog/max3421/hcd_max3421.c delete mode 100644 src/portable/analog/max3421e/hcd_max3421e.c (limited to 'src/host/hcd.h') diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 862f67bc7..45a5166a7 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -93,7 +93,7 @@ TU_ATTR_UNUSED static void power_event_handler(nrfx_power_usb_evt_t event) { } //------------- Host using MAX2341E -------------// -#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421E) && CFG_TUH_MAX3421E +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(0); void max3421e_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { @@ -102,19 +102,17 @@ void max3421e_int_handler(nrfx_gpiote_pin_t pin, nrf_gpiote_polarity_t action) { tuh_int_handler(1); } -static inline void max3421e_cs_assert(bool active) { - nrf_gpio_pin_write(MAX3421E_CS_PIN, active ? 0 : 1); -} - //--------------------------------------------------------------------+ // API: SPI transfer with MAX3421E, must be implemented by application //--------------------------------------------------------------------+ -bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, - uint8_t * rx_buf, size_t rx_len, bool keep_cs) { +void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) { (void) rhport; + nrf_gpio_pin_write(MAX3421E_CS_PIN, active ? 0 : 1); +} - max3421e_cs_assert(true); +bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, uint8_t * rx_buf, size_t rx_len) { + (void) rhport; nrfx_spim_xfer_desc_t xfer = { .p_tx_buffer = tx_buf, @@ -123,11 +121,7 @@ bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx .rx_length = rx_len, }; - bool ret = (nrfx_spim_xfer(&_spi, &xfer, 0) == NRFX_SUCCESS); - - if ( !keep_cs ) max3421e_cs_assert(false); - - return ret; + return (nrfx_spim_xfer(&_spi, &xfer, 0) == NRFX_SUCCESS); } #endif @@ -218,10 +212,10 @@ void board_init(void) { if ( usb_reg & OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(USB_EVT_READY); #endif -#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421E) && CFG_TUH_MAX3421E +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 // manually manage CS nrf_gpio_cfg_output(MAX3421E_CS_PIN); - max3421e_cs_assert(false); + tuh_max3421_spi_cs_api(0, false); // USB host using max3421e usb controller via SPI nrfx_spim_config_t cfg = { diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 8bf7bcb52..ff6b882ce 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -124,7 +124,7 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c - ${TOP}/src/portable/analog/max3421e/hcd_max3421e.c + ${TOP}/src/portable/analog/max3421/hcd_max3421.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/src/host/hcd.h b/src/host/hcd.h index 079877b79..1f01a1a2f 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -170,7 +170,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); +bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c new file mode 100644 index 000000000..edcb6ca6f --- /dev/null +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -0,0 +1,613 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 + +#include "host/hcd.h" + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +// Command format is +// Reg [7:3] | 0 [2] | Dir [1] | Ack [0] + +enum { + CMDBYTE_WRITE = 0x02, +}; + +enum { + RCVVFIFO_ADDR = 1u << 3, // 0x08 + SNDFIFO_ADDR = 2u << 3, // 0x10 + SUDFIFO_ADDR = 4u << 3, // 0x20 + RCVBC_ADDR = 6u << 3, // 0x30 + SNDBC_ADDR = 7u << 3, // 0x38 + USBIRQ_ADDR = 13u << 3, // 0x68 + USBIEN_ADDR = 14u << 3, // 0x70 + USBCTL_ADDR = 15u << 3, // 0x78 + CPUCTL_ADDR = 16u << 3, // 0x80 + PINCTL_ADDR = 17u << 3, // 0x88 + REVISION_ADDR = 18u << 3, // 0x90 + HIRQ_ADDR = 25u << 3, // 0xC8 + HIEN_ADDR = 26u << 3, // 0xD0 + MODE_ADDR = 27u << 3, // 0xD8 + PERADDR_ADDR = 28u << 3, // 0xE0 + HCTL_ADDR = 29u << 3, // 0xE8 + HXFR_ADDR = 30u << 3, // 0xF0 + HRSL_ADDR = 31u << 3, // 0xF8 +}; + +enum { + USBIRQ_OSCOK_IRQ = 1u << 0, + USBIRQ_NOVBUS_IRQ = 1u << 5, + USBIRQ_VBUS_IRQ = 1u << 6, +}; + +enum { + USBCTL_PWRDOWN = 1u << 4, + USBCTL_CHIPRES = 1u << 5, +}; + +enum { + CPUCTL_IE = 1u << 0, + CPUCTL_PULSEWID0 = 1u << 6, + CPUCTL_PULSEWID1 = 1u << 7, +}; + +enum { + PINCTL_GPXA = 1u << 0, + PINCTL_GPXB = 1u << 1, + PINCTL_POSINT = 1u << 2, + PINCTL_INTLEVEL = 1u << 3, + PINCTL_FDUPSPI = 1u << 4, +}; + +enum { + HIRQ_BUSEVENT_IRQ = 1u << 0, + HIRQ_RWU_IRQ = 1u << 1, + HIRQ_RCVDAV_IRQ = 1u << 2, + HIRQ_SNDBAV_IRQ = 1u << 3, + HIRQ_SUSDN_IRQ = 1u << 4, + HIRQ_CONDET_IRQ = 1u << 5, + HIRQ_FRAME_IRQ = 1u << 6, + HIRQ_HXFRDN_IRQ = 1u << 7, +}; + +enum { + MODE_HOST = 1u << 0, + MODE_LOWSPEED = 1u << 1, + MODE_HUBPRE = 1u << 2, + MODE_SOFKAENAB = 1u << 3, + MODE_SEPIRQ = 1u << 4, + MODE_DELAYISO = 1u << 5, + MODE_DMPULLDN = 1u << 6, + MODE_DPPULLDN = 1u << 7, +}; + +enum { + HCTL_BUSRST = 1u << 0, + HCTL_FRMRST = 1u << 1, + HCTL_SAMPLEBUS = 1u << 2, + HCTL_SIGRSM = 1u << 3, + HCTL_RCVTOG0 = 1u << 4, + HCTL_RCVTOG1 = 1u << 5, + HCTL_SNDTOG0 = 1u << 6, + HCTL_SNDTOG1 = 1u << 7, +}; + +enum { + HXFR_EPNUM_MASK = 0x0f, + HXFR_SETUP = 1u << 4, + HXFR_OUT_NIN = 1u << 5, + HXFR_ISO = 1u << 6, + HXFR_HS = 1u << 7, +}; + +enum { + HRSL_RESULT_MASK = 0x0f, + HRSL_RCVTOGRD = 1u << 4, + HRSL_SNDTOGRD = 1u << 5, + HRSL_KSTATUS = 1u << 6, + HRSL_JSTATUS = 1u << 7, +}; + +enum { + HRSL_SUCCESS = 0, + HRSL_BUSY, + HRSL_BAD_REQ, + HRSL_UNDEF, + HRSL_NAK, + HRSL_STALL, + HRSL_TOG_ERR, + HRSL_WRONG_PID, + HRSL_BAD_BYTECOUNT, + HRSL_PID_ERR, + HRSL_PKT_ERR, + HRSL_CRC_ERR, + HRSL_K_ERR, + HRSL_J_ERR, + HRSL_TIMEOUT, + HRSL_BABBLE, +}; + +enum { + DEFAULT_HIEN = HIRQ_CONDET_IRQ | HIRQ_FRAME_IRQ | HIRQ_HXFRDN_IRQ +}; + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +typedef struct { + uint8_t xfer_type; + uint8_t data_toggle; + uint16_t packet_size; + + uint16_t total_len; + uint16_t xferred_len; + uint8_t* buf; +} hcd_ep_t; + +typedef struct { + bool inited; + + // cached register + uint8_t sndbc; + uint8_t mode; + uint8_t peraddr; + uint8_t hxfr; + + volatile uint16_t frame_count; + + hcd_ep_t ep[8][2]; +} max2341_data_t; + +static max2341_data_t _hcd_data; + +//--------------------------------------------------------------------+ +// API: SPI transfer with MAX3421E, must be implemented by application +//--------------------------------------------------------------------+ + +void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); +bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, uint8_t * rx_buf, size_t rx_len); + +//void tuh_max3421e_int_enable(uint8_t rhport, bool enabled); + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +static void fifo_write(uint8_t reg, uint8_t const * buffer, uint16_t len) { + reg |= CMDBYTE_WRITE; + + tuh_max3421_spi_cs_api(0, true); + + tuh_max3421_spi_xfer_api(0, ®, 1, NULL, 0); + tuh_max3421_spi_xfer_api(0, buffer, len, NULL, 0); + + tuh_max3421_spi_cs_api(0, false); +} + +// return HIRQ register since we are in full-duplex mode +static uint8_t reg_write(uint8_t reg, uint8_t data) { + uint8_t tx_buf[2] = {reg | CMDBYTE_WRITE, data}; + uint8_t rx_buf[2] = {0, 0}; + + tuh_max3421_spi_cs_api(0, true); + tuh_max3421_spi_xfer_api(0, tx_buf, 2, rx_buf, 2); + tuh_max3421_spi_cs_api(0, false); + + TU_LOG2("HIRQ: %02X\r\n", rx_buf[0]); + return rx_buf[0]; +} + +static uint8_t reg_read(uint8_t reg) { + uint8_t tx_buf[2] = {reg, 0}; + uint8_t rx_buf[2] = {0, 0}; + + tuh_max3421_spi_cs_api(0, true); + bool ret = tuh_max3421_spi_xfer_api(0, tx_buf, 2, rx_buf, 2); + tuh_max3421_spi_cs_api(0, false); + + return ret ? rx_buf[1] : 0; +} + +static inline uint8_t mode_write(uint8_t data) { + _hcd_data.mode = data; + return reg_write(MODE_ADDR, data); +} + +static inline uint8_t peraddr_write(uint8_t data) { + if ( _hcd_data.peraddr == data ) return 0; // no need to change address + + _hcd_data.peraddr = data; + return reg_write(PERADDR_ADDR, data); +} + +static inline uint8_t hxfr_write(uint8_t data) { + _hcd_data.hxfr = data; + return reg_write(HXFR_ADDR, data); +} + +static inline uint8_t sndbc_write(uint8_t data) { + _hcd_data.sndbc = data; + return reg_write(SNDBC_ADDR, data); +} + + +//--------------------------------------------------------------------+ +// Controller API +//--------------------------------------------------------------------+ + +// optional hcd configuration, called by tuh_configure() +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + + return false; +} + +tusb_speed_t handle_connect_irq(uint8_t rhport) { + (void) rhport; + + uint8_t const hrsl = reg_read(HRSL_ADDR); + uint8_t const jk = hrsl & (HRSL_JSTATUS | HRSL_KSTATUS); + + tusb_speed_t speed; + uint8_t new_mode = MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST; + + switch(jk) { + case 0x00: + // SEO is disconnected + speed = TUSB_SPEED_INVALID; + break; + + case (HRSL_JSTATUS | HRSL_KSTATUS): + // SE1 is illegal + speed = TUSB_SPEED_INVALID; + break; + + default: { + // Low speed if (LS = 1 and J-state) or (LS = 0 and K-State) + uint8_t const mode = reg_read(MODE_ADDR); + uint8_t const ls_bit = mode & MODE_LOWSPEED; + + if ( (ls_bit && (jk == HRSL_JSTATUS)) || (!ls_bit && (jk == HRSL_KSTATUS)) ) { + speed = TUSB_SPEED_LOW; + new_mode |= MODE_LOWSPEED; + } else { + speed = TUSB_SPEED_FULL; + } + + new_mode |= MODE_SOFKAENAB; // enable SOF since there is new device + + break; + } + } + + mode_write(new_mode); + TU_LOG2_INT(speed); + return speed; +} + +// Initialize controller to host mode +bool hcd_init(uint8_t rhport) { + (void) rhport; + + tu_memclr(&_hcd_data, sizeof(_hcd_data)); + + // full duplex, interrupt negative edge + reg_write(PINCTL_ADDR, PINCTL_FDUPSPI); + + // reset + reg_write(USBCTL_ADDR, USBCTL_CHIPRES); + reg_write(USBCTL_ADDR, 0); + while( !(reg_read(USBIRQ_ADDR) & USBIRQ_OSCOK_IRQ) ) { + // wait for oscillator to stabilize + } + + // Mode: Host and DP/DM pull down + mode_write(MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST); + + // bus reset, this will trigger CONDET IRQ if device is already connected + reg_write(HCTL_ADDR, HCTL_BUSRST); + + // clear all previously pending IRQ + reg_write(HIRQ_ADDR, 0xff); + + _hcd_data.inited = true; + + // Enable Connection IRQ + reg_write(HIEN_ADDR, DEFAULT_HIEN); + + // Enable Interrupt pin + reg_write(CPUCTL_ADDR, CPUCTL_IE); + + return true; +} + +// Enable USB interrupt +void hcd_int_enable (uint8_t rhport) { + (void) rhport; +} + +// Disable USB interrupt +void hcd_int_disable(uint8_t rhport) { + (void) rhport; +} + +// Get frame number (1ms) +uint32_t hcd_frame_number(uint8_t rhport) { + (void) rhport; + return (uint32_t ) _hcd_data.frame_count; +} + +//--------------------------------------------------------------------+ +// Port API +//--------------------------------------------------------------------+ + +// Get the current connect status of roothub port +bool hcd_port_connect_status(uint8_t rhport) { + (void) rhport; + return (_hcd_data.mode & MODE_SOFKAENAB) ? true : false; +} + +// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. +// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. +void hcd_port_reset(uint8_t rhport) { + (void) rhport; + // Bus reset will also trigger CONDET IRQ, disable it + uint8_t hien = DEFAULT_HIEN & ~HIRQ_CONDET_IRQ; + reg_write(HIEN_ADDR, hien); + + reg_write(HCTL_ADDR, HCTL_BUSRST); +} + +// Complete bus reset sequence, may be required by some controllers +void hcd_port_reset_end(uint8_t rhport) { + (void) rhport; + reg_write(HCTL_ADDR, 0); + + // Bus reset will also trigger CONDET IRQ, clear and re-enable it after reset + reg_write(HIRQ_ADDR, HIRQ_CONDET_IRQ); + reg_write(HIEN_ADDR, DEFAULT_HIEN); +} + +// Get port link speed +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { + (void) rhport; + return (_hcd_data.mode & MODE_LOWSPEED) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL; +} + +// HCD closes all opened endpoints belong to this device +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { + (void) rhport; + (void) dev_addr; +} + +//--------------------------------------------------------------------+ +// Endpoints API +//--------------------------------------------------------------------+ + +// Open an endpoint +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { + (void) rhport; + (void) dev_addr; + (void) ep_desc; + + uint8_t ep_num = tu_edpt_number(ep_desc->bEndpointAddress); + uint8_t ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); + + _hcd_data.ep[ep_num][ep_dir].packet_size = tu_edpt_packet_size(ep_desc); + + return true; +} + +// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked +bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { + (void) rhport; + + uint8_t const ep_num = tu_edpt_number(ep_addr); + uint8_t const ep_dir = tu_edpt_dir(ep_addr); + + hcd_ep_t* ep = &_hcd_data.ep[ep_num][ep_dir]; + + ep->buf = buffer; + ep->total_len = buflen; + ep->xferred_len = 0; + + uint8_t hirq = peraddr_write(daddr); + + uint8_t hctl = 0; + uint8_t hxfr = ep_num; + if ( ep_num == 0 ) { + ep->data_toggle = 1; + if ( buffer == NULL || buflen == 0 ) { + // ZLP for ACK stage + hxfr |= HXFR_HS; + } + } else if ( ep->xfer_type == TUSB_XFER_ISOCHRONOUS ) { + hxfr |= HXFR_ISO; + } + + if ( 0 == ep_dir ) { + // Page 12: Programming BULK-OUT Transfers + TU_ASSERT(hirq & HIRQ_RCVDAV_IRQ); + + uint8_t const xact_len = (uint8_t) tu_min16(buflen, ep->packet_size); + fifo_write(SNDFIFO_ADDR, buffer, xact_len); + reg_write(SNDBC_ADDR, xact_len); + + hctl = (ep->data_toggle ? HCTL_SNDTOG1 : HCTL_SNDTOG0); + hxfr |= HXFR_OUT_NIN; + } else { + // Page 13: Programming BULK-IN Transfers + hctl = (ep->data_toggle ? HCTL_RCVTOG1 : HCTL_RCVTOG0); + } + + reg_write(HCTL_ADDR, hctl); + hxfr_write(hxfr); + + return true; +} + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked +bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]) { + (void) rhport; + + hcd_ep_t* ep = &_hcd_data.ep[0][0]; + ep->total_len = 8; + ep->xferred_len = 0; + + peraddr_write(daddr); + fifo_write(SUDFIFO_ADDR, setup_packet, 8); + hxfr_write(HXFR_SETUP); + + return true; +} + +// clear stall, data toggle is also reset to DATA0 +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +static void handle_xfer_done(uint8_t rhport) { + (void) rhport; + + uint8_t const hrsl = reg_read(HRSL_ADDR); + uint8_t const result = hrsl & HRSL_RESULT_MASK; + uint8_t xfer_result; + + TU_LOG3("HRSL: %02X\r\n", hrsl); + switch(result) { + case HRSL_SUCCESS: + xfer_result = XFER_RESULT_SUCCESS; + break; + + case HRSL_STALL: + xfer_result = XFER_RESULT_STALLED; + break; + + case HRSL_BAD_REQ: + // occurred when initialized without any pending transfer. Skip for now + return; + + default: + xfer_result = XFER_RESULT_FAILED; + break; + } + + uint8_t ep_dir = 0; + uint8_t ep_num = _hcd_data.hxfr & HXFR_EPNUM_MASK; + uint8_t const xfer_type = _hcd_data.hxfr & 0xf0; + + hcd_ep_t * ep; + + if ( (xfer_type & HXFR_SETUP) || (xfer_type & HXFR_OUT_NIN) ) { + // SETUP or OUT transfer + ep_dir = 0; + ep = &_hcd_data.ep[ep_num][ep_dir]; + + uint8_t const xact_len = (xfer_type & HXFR_SETUP) ? 8 : _hcd_data.sndbc; + ep->xferred_len += xact_len; + + if ( xact_len < ep->packet_size || ep->xferred_len >= ep->total_len ) { + hcd_event_xfer_complete(_hcd_data.peraddr, ep_num, ep->xferred_len, xfer_result, true); + }else { + // more to transfer + } + } else { + // IN transfer + ep_dir = 1; + ep = &_hcd_data.ep[ep_num][ep_dir]; + uint8_t const xact_len = reg_read(RCVBC_ADDR); + ep->xferred_len += xact_len; + + // short packet or all bytes transferred + if ( xact_len < ep->packet_size || ep->xferred_len >= ep->total_len ) { + hcd_event_xfer_complete(_hcd_data.peraddr, TUSB_DIR_IN_MASK | ep_num, ep->xferred_len, xfer_result, true); + }else { + // more to transfer + } + } +} + +// Interrupt Handler +void hcd_int_handler(uint8_t rhport) { + // not initialized, do nothing + if ( !_hcd_data.inited ) return; + + uint8_t hirq = reg_read(HIRQ_ADDR); + TU_LOG3_HEX(hirq); + + if (hirq & HIRQ_FRAME_IRQ) { + _hcd_data.frame_count++; + } + + if (hirq & HIRQ_CONDET_IRQ) { + tusb_speed_t speed = handle_connect_irq(rhport); + + if (speed == TUSB_SPEED_INVALID) { + hcd_event_device_remove(rhport, true); + }else { + hcd_event_device_attach(rhport, true); + } + } + + if (hirq & HIRQ_HXFRDN_IRQ) { + handle_xfer_done(rhport); + } + + if ( hirq & HIRQ_RCVDAV_IRQ ) { + TU_LOG3("RCVDAV\r\n"); + TU_LOG3_INT(reg_read(RCVBC_ADDR)); + } + + // clear all interrupt execept SNDBAV_IRQ + hirq &= ~HIRQ_SNDBAV_IRQ; + if ( hirq ) { + reg_write(HIRQ_ADDR, hirq); + } +} + +#endif diff --git a/src/portable/analog/max3421e/hcd_max3421e.c b/src/portable/analog/max3421e/hcd_max3421e.c deleted file mode 100644 index c9596f695..000000000 --- a/src/portable/analog/max3421e/hcd_max3421e.c +++ /dev/null @@ -1,503 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2023 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "tusb_option.h" - -#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421E) && CFG_TUH_MAX3421E - -#include "host/hcd.h" - -//--------------------------------------------------------------------+ -// -//--------------------------------------------------------------------+ - -// Command format is -// Reg [7:3] | 0 [2] | Dir [1] | Ack [0] - -enum { - CMDBYTE_WRITE = 0x02, -}; - -enum { - RCVVFIFO_ADDR = 1u << 3, // 0x08 - SNDFIFO_ADDR = 2u << 3, // 0x10 - SUDFIFO_ADDR = 4u << 3, // 0x20 - RCVBC_ADDR = 6u << 3, // 0x30 - SNDBC_ADDR = 7u << 3, // 0x38 - USBIRQ_ADDR = 13u << 3, // 0x68 - USBIEN_ADDR = 14u << 3, // 0x70 - USBCTL_ADDR = 15u << 3, // 0x78 - CPUCTL_ADDR = 16u << 3, // 0x80 - PINCTL_ADDR = 17u << 3, // 0x88 - REVISION_ADDR = 18u << 3, // 0x90 - HIRQ_ADDR = 25u << 3, // 0xC8 - HIEN_ADDR = 26u << 3, // 0xD0 - MODE_ADDR = 27u << 3, // 0xD8 - PERADDR_ADDR = 28u << 3, // 0xE0 - HCTL_ADDR = 29u << 3, // 0xE8 - HXFR_ADDR = 30u << 3, // 0xF0 - HRSL_ADDR = 31u << 3, // 0xF8 -}; - -enum { - USBIRQ_OSCOK_IRQ = 1u << 0, - USBIRQ_NOVBUS_IRQ = 1u << 5, - USBIRQ_VBUS_IRQ = 1u << 6, -}; - -enum { - USBCTL_PWRDOWN = 1u << 4, - USBCTL_CHIPRES = 1u << 5, -}; - -enum { - CPUCTL_IE = 1u << 0, - CPUCTL_PULSEWID0 = 1u << 6, - CPUCTL_PULSEWID1 = 1u << 7, -}; - -enum { - PINCTL_GPXA = 1u << 0, - PINCTL_GPXB = 1u << 1, - PINCTL_POSINT = 1u << 2, - PINCTL_INTLEVEL = 1u << 3, - PINCTL_FDUPSPI = 1u << 4, -}; - -enum { - HIRQ_BUSEVENT_IRQ = 1u << 0, - HIRQ_RWU_IRQ = 1u << 1, - HIRQ_RCVDAV_IRQ = 1u << 2, - HIRQ_SNDBAV_IRQ = 1u << 3, - HIRQ_SUSDN_IRQ = 1u << 4, - HIRQ_CONDET_IRQ = 1u << 5, - HIRQ_FRAME_IRQ = 1u << 6, - HIRQ_HXFRDN_IRQ = 1u << 7, -}; - -enum { - MODE_HOST = 1u << 0, - MODE_LOWSPEED = 1u << 1, - MODE_HUBPRE = 1u << 2, - MODE_SOFKAENAB = 1u << 3, - MODE_SEPIRQ = 1u << 4, - MODE_DELAYISO = 1u << 5, - MODE_DMPULLDN = 1u << 6, - MODE_DPPULLDN = 1u << 7, -}; - -enum { - HCTL_BUSRST = 1u << 1, - HCTL_FRMRST = 1u << 2, - HCTL_SAMPLEBUS = 1u << 3, - HCTL_SIGRSM = 1u << 4, - HCTL_RCVTOG0 = 1u << 5, - HCTL_RCVTOG1 = 1u << 6, - HCTL_SNDTOG0 = 1u << 7, - HCTL_SNDTOG1 = 1u << 8, -}; - -enum { - HXFR_EPNUM_MASK = 0x0f, - HXFR_SETUP = 1u << 4, - HXFR_OUT_NIN = 1u << 5, - HXFR_ISO = 1u << 6, - HXFR_HS = 1u << 7, -}; - -enum { - HRSL_RESULT_MASK = 0x0f, - HRSL_RCVTOGRD = 1u << 4, - HRSL_SNDTOGRD = 1u << 5, - HRSL_KSTATUS = 1u << 6, - HRSL_JSTATUS = 1u << 7, -}; - -enum { - HRSL_SUCCESS = 0, - HRSL_BUSY, - HRSL_BAD_REQ, - HRSL_UNDEF, - HRSL_NAK, - HRSL_STALL, - HRSL_TOG_ERR, - HRSL_WRONG_PID, - HRSL_BAD_BYTECOUNT, - HRSL_PID_ERR, - HRSL_PKT_ERR, - HRSL_CRC_ERR, - HRSL_K_ERR, - HRSL_J_ERR, - HRSL_TIMEOUT, - HRSL_BABBLE, -}; - - -//--------------------------------------------------------------------+ -// -//--------------------------------------------------------------------+ - -typedef struct { - // cached register - uint8_t mode; - uint8_t peraddr; - uint8_t hxfr; - - volatile uint16_t frame_count; - - struct { - uint16_t packet_size; - uint16_t total_len; - uint8_t xfer_type; - }ep[8][2]; -} max2341e_data_t; - -static max2341e_data_t _hcd_data; - -//--------------------------------------------------------------------+ -// API: SPI transfer with MAX3421E, must be implemented by application -//--------------------------------------------------------------------+ - -bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, - uint8_t * rx_buf, size_t rx_len, bool keep_cs); -//void tuh_max3421e_int_enable(uint8_t rhport, bool enabled); - -//--------------------------------------------------------------------+ -// -//--------------------------------------------------------------------+ - -// return HIRQ register since we are in full-duplex mode -static uint8_t reg_write(uint8_t reg, uint8_t data) { - uint8_t tx_buf[2] = {reg | CMDBYTE_WRITE, data}; - uint8_t rx_buf[2] = {0, 0}; - tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2, false); - TU_LOG2("HIRQ: %02X\r\n", rx_buf[0]); - return rx_buf[0]; -} - -static uint8_t reg_read(uint8_t reg) { - uint8_t tx_buf[2] = {reg, 0}; - uint8_t rx_buf[2] = {0, 0}; - return tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2, false) ? rx_buf[1] : 0; -} - -static inline uint8_t mode_write(uint8_t data) { - _hcd_data.mode = data; - return reg_write(MODE_ADDR, data); -} - -static inline uint8_t peraddr_write(uint8_t data) { - if ( _hcd_data.peraddr == data ) return 0; // no need to change address - - _hcd_data.peraddr = data; - return reg_write(PERADDR_ADDR, data); -} - -static inline uint8_t hxfr_write(uint8_t data) { - _hcd_data.hxfr = data; - return reg_write(HXFR_ADDR, data); -} - -static void fifo_write(uint8_t reg, uint8_t const * buffer, uint16_t len) { - uint8_t tx_buf[1] = {reg | CMDBYTE_WRITE}; - tuh_max3421e_spi_xfer_api(0, tx_buf, 1, NULL, 0, true); - tuh_max3421e_spi_xfer_api(0, buffer, len, NULL, 0, false); -} - - -//--------------------------------------------------------------------+ -// Controller API -//--------------------------------------------------------------------+ - -// optional hcd configuration, called by tuh_configure() -bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { - (void) rhport; - (void) cfg_id; - (void) cfg_param; - - return false; -} - -tusb_speed_t handle_connect_irq(uint8_t rhport) { - (void) rhport; - - uint8_t const hrsl = reg_read(HRSL_ADDR); - uint8_t const jk = hrsl & (HRSL_JSTATUS | HRSL_KSTATUS); - - tusb_speed_t speed; - uint8_t new_mode = MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST; - - switch(jk) { - case 0x00: - // SEO is disconnected - speed = TUSB_SPEED_INVALID; - break; - - case (HRSL_JSTATUS | HRSL_KSTATUS): - // SE1 is illegal - speed = TUSB_SPEED_INVALID; - break; - - default: { - // Low speed if (LS = 1 and J-state) or (LS = 0 and K-State) - uint8_t const mode = reg_read(MODE_ADDR); - uint8_t const ls_bit = mode & MODE_LOWSPEED; - - if ( (ls_bit && (jk == HRSL_JSTATUS)) || (!ls_bit && (jk == HRSL_KSTATUS)) ) { - speed = TUSB_SPEED_LOW; - new_mode |= MODE_LOWSPEED; - } else { - speed = TUSB_SPEED_FULL; - } - - new_mode |= MODE_SOFKAENAB; // enable SOF since there is new device - - break; - } - } - - mode_write(new_mode); - TU_LOG2_INT(speed); - return speed; -} - -// Initialize controller to host mode -bool hcd_init(uint8_t rhport) { - (void) rhport; - - tu_memclr(&_hcd_data, sizeof(_hcd_data)); - - // full duplex, interrupt level (should be configurable) - reg_write(PINCTL_ADDR, PINCTL_FDUPSPI | PINCTL_INTLEVEL); - - // reset - reg_write(USBCTL_ADDR, USBCTL_CHIPRES); - reg_write(USBCTL_ADDR, 0); - while( !(reg_read(USBIRQ_ADDR) & USBIRQ_OSCOK_IRQ) ) { - // wait for oscillator to stabilize - } - - // Mode: Host and DP/DM pull down - mode_write(MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST); - - // Enable Connection IRQ - reg_write(HIEN_ADDR, HIRQ_CONDET_IRQ | HIRQ_FRAME_IRQ | HIRQ_HXFRDN_IRQ); - - #if 0 - // Note: if device is already connected, CONDET IRQ may not be triggered. - // We need to detect it by sampling bus signal. FIXME not working - reg_write(HCTL_ADDR, HCTL_SAMPLEBUS); - while ( reg_read(HCTL_ADDR) & HCTL_SAMPLEBUS ) {} - - if ( TUSB_SPEED_INVALID != handle_connect_irq(rhport) ) { - reg_write(HIRQ_ADDR, HIRQ_CONDET_IRQ); // clear connect irq - } - #endif - - // Enable Interrupt pin - reg_write(CPUCTL_ADDR, CPUCTL_IE); - - return true; -} - -// Enable USB interrupt -void hcd_int_enable (uint8_t rhport) { - (void) rhport; -} - -// Disable USB interrupt -void hcd_int_disable(uint8_t rhport) { - (void) rhport; -} - -// Get frame number (1ms) -uint32_t hcd_frame_number(uint8_t rhport) { - (void) rhport; - return (uint32_t ) _hcd_data.frame_count; -} - -//--------------------------------------------------------------------+ -// Port API -//--------------------------------------------------------------------+ - -// Get the current connect status of roothub port -bool hcd_port_connect_status(uint8_t rhport) { - (void) rhport; - return (_hcd_data.mode & MODE_SOFKAENAB) ? true : false; -} - -// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. -// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. -void hcd_port_reset(uint8_t rhport) { - (void) rhport; - reg_write(HCTL_ADDR, HCTL_BUSRST); -} - -// Complete bus reset sequence, may be required by some controllers -void hcd_port_reset_end(uint8_t rhport) { - (void) rhport; - reg_write(HCTL_ADDR, 0); -} - -// Get port link speed -tusb_speed_t hcd_port_speed_get(uint8_t rhport) { - (void) rhport; - return (_hcd_data.mode & MODE_LOWSPEED) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL; -} - -// HCD closes all opened endpoints belong to this device -void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { - (void) rhport; - (void) dev_addr; -} - -//--------------------------------------------------------------------+ -// Endpoints API -//--------------------------------------------------------------------+ - -// Open an endpoint -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { - (void) rhport; - (void) dev_addr; - (void) ep_desc; - - uint8_t ep_num = tu_edpt_number(ep_desc->bEndpointAddress); - uint8_t ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); - - _hcd_data.ep[ep_num][ep_dir].packet_size = tu_edpt_packet_size(ep_desc); - - return true; -} - -// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; - (void) buffer; - (void) buflen; - - return false; -} - -// Abort a queued transfer. Note: it can only abort transfer that has not been started -// Return true if a queued transfer is aborted, false if there is no transfer to abort -bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; - - return false; -} - -// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked -bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]) { - (void) rhport; - (void) daddr; - (void) setup_packet; - - _hcd_data.ep[0][0].total_len = 8; - - peraddr_write(daddr); - fifo_write(SUDFIFO_ADDR, setup_packet, 8); - hxfr_write(HXFR_SETUP); - - return true; -} - -// clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; - - return false; -} - -// Interrupt Handler -void hcd_int_handler(uint8_t rhport) { - uint8_t hirq = reg_read(HIRQ_ADDR); - TU_LOG3_HEX(hirq); - - if (hirq & HIRQ_CONDET_IRQ) { - tusb_speed_t speed = handle_connect_irq(rhport); - - if (speed == TUSB_SPEED_INVALID) { - hcd_event_device_remove(rhport, true); - }else { - hcd_event_device_attach(rhport, true); - } - } - - if (hirq & HIRQ_FRAME_IRQ) { - _hcd_data.frame_count++; - } - - if (hirq & HIRQ_HXFRDN_IRQ) { - uint8_t const hrsl = reg_read(HRSL_ADDR); - uint8_t const result = hrsl & HRSL_RESULT_MASK; - uint8_t xfer_result; - - TU_LOG3("HRSL: %02X\r\n", hrsl); - switch(result) { - case HRSL_SUCCESS: - xfer_result = XFER_RESULT_SUCCESS; - break; - - case HRSL_STALL: - xfer_result = XFER_RESULT_STALLED; - break; - - default: - xfer_result = XFER_RESULT_FAILED; - break; - } - - uint8_t ep_dir = 0; - uint8_t ep_num = _hcd_data.hxfr & HXFR_EPNUM_MASK; - uint8_t const xfer_type = _hcd_data.hxfr & 0xf0; - - if ( xfer_type & HXFR_SETUP ) { - // SETUP transfer - ep_dir = 0; - }else if ( !(xfer_type & HXFR_OUT_NIN) ) { - // IN transfer - ep_dir = 1; - } - - uint8_t const ep_addr = tu_edpt_addr(ep_num, ep_dir); - uint16_t xferred_len = _hcd_data.ep[ep_num][ep_dir].total_len; - - hcd_event_xfer_complete(_hcd_data.peraddr, ep_addr, xferred_len, xfer_result, true); - } - - // clear all interrupt - if ( hirq ) { - reg_write(HIRQ_ADDR, hirq); - } -} - -#endif -- cgit v1.3.1 From 502b1bdda62f0f207d9a51daf134574e455f3aa2 Mon Sep 17 00:00:00 2001 From: hathach Date: Sun, 27 Aug 2023 23:45:34 +0700 Subject: more update to transaction --- examples/host/cdc_msc_hid/src/tusb_config.h | 9 ++-- examples/host/msc_file_explorer/src/tusb_config.h | 10 +++-- src/common/tusb_mcu.h | 12 ++++++ src/host/hcd.h | 4 +- src/host/usbh.c | 1 + src/portable/analog/max3421/hcd_max3421.c | 51 +++++++++++++++-------- 6 files changed, 62 insertions(+), 25 deletions(-) (limited to 'src/host/hcd.h') diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index abb75f068..7d621d466 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -35,9 +35,12 @@ //--------------------------------------------------------------------+ #if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB + // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 + #define CFG_TUH_RPI_PIO_USB 0 + #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB +#elif CFG_TUSB_MCU == OPT_MCU_NRF5X + // Use external USB controller (via SPI) MAX3421E (aka usb host shield) + #define CFG_TUH_MAX3421 1 #endif // RHPort number used for host can be defined by board.mk, default to port 0 diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index 1e0d067bf..bb2fd4cf5 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -35,11 +35,15 @@ //--------------------------------------------------------------------+ #if CFG_TUSB_MCU == OPT_MCU_RP2040 -// change to 1 if using pico-pio-usb as host controller for raspberry rp2040 -#define CFG_TUH_RPI_PIO_USB 0 -#define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_USB + // change to 1 if using pico-pio-usb as host controller for raspberry rp2040 + #define CFG_TUH_RPI_PIO_USB 0 + #define BOARD_TUH_RHPORT CFG_TUH_RPI_PIO_US +#elif CFG_TUSB_MCU == OPT_MCU_NRF5X + // Use external USB controller (via SPI) MAX3421E (aka usb host shield) + #define CFG_TUH_MAX3421 1 #endif + // RHPort number used for host can be defined by board.mk, default to port 0 #ifndef BOARD_TUH_RHPORT #define BOARD_TUH_RHPORT 0 diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 35f94efbc..21939df7c 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -385,6 +385,18 @@ #define TUP_RHPORT_HIGHSPEED 1 #endif + +//--------------------------------------------------------------------+ +// External USB controller +//--------------------------------------------------------------------+ + +#if defined(CFG_TUH_MAX3421) & CFG_TUH_MAX3421 + #ifndef CFG_TUH_MAX3421_ENDPOINT_TOTAL + #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4*(CFG_TUH_DEVICE_MAX-1)) + #endif +#endif + + //--------------------------------------------------------------------+ // Default Values //--------------------------------------------------------------------+ diff --git a/src/host/hcd.h b/src/host/hcd.h index 1f01a1a2f..e25b20ea3 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -39,7 +39,7 @@ // Configuration //--------------------------------------------------------------------+ -// Max number of endpoints per device +// Max number of endpoints pair per device // TODO optimize memory usage #ifndef CFG_TUH_ENDPOINT_MAX #define CFG_TUH_ENDPOINT_MAX 16 @@ -167,7 +167,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); //--------------------------------------------------------------------+ // Open an endpoint -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); +bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); diff --git a/src/host/usbh.c b/src/host/usbh.c index 7a09f5b6e..12a7f5839 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -919,6 +919,7 @@ TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) switch (event->event_id) { // case HCD_EVENT_DEVICE_REMOVE: +// // FIXME device remove from a hub need an HCD API for hcd to free up endpoint // // mark device as removing to prevent further xfer before the event is processed in usbh task // break; diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index e546f99ce..574cca788 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -582,6 +582,7 @@ void xact_out(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { } uint8_t const xact_len = (uint8_t) tu_min16(ep->total_len - ep->xferred_len, ep->packet_size); + TU_ASSERT(_hcd_data.hirq & HIRQ_SNDBAV_IRQ, ); fifo_write(rhport, SNDFIFO_ADDR, ep->buf, xact_len, in_isr); sndbc_write(rhport, xact_len, in_isr); @@ -602,6 +603,28 @@ void xact_in(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { hxfr_write(rhport, hxfr, in_isr); } +TU_ATTR_ALWAYS_INLINE static inline void xact_inout(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { + if (ep->ep_dir) { + xact_in(rhport, ep, switch_ep, in_isr); + }else { + xact_out(rhport, ep, switch_ep, in_isr); + } +} + +void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t result, uint8_t data_toggle) { + (void) rhport; + (void) result; + ep->xfer_pending = 0; + ep->data_toggle = data_toggle; + //uint8_t const ep_addr = tu_edpt_addr(ep->ep_num, ep->ep_dir); + //hcd_event_xfer_complete(rhport, ep_addr, ep->xferred_len, result, true); + +// max3421_ep_t *next_ep = find_next_pending_ep(ep); +// if (next_ep) { +// xact_inout(rhport, next_ep, true, true); +// } +} + // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { (void) rhport; @@ -612,6 +635,9 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buf max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir); TU_ASSERT(ep); + // control transfer can switch direction + ep->ep_dir = ep_dir; + ep->buf = buffer; ep->total_len = buflen; ep->xferred_len = 0; @@ -636,12 +662,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buf } } - if ( 0 == ep_dir ) { - TU_ASSERT(_hcd_data.hirq & HIRQ_SNDBAV_IRQ); - xact_out(rhport, ep, true, false); - } else { - xact_in(rhport, ep, true, false); - } + xact_inout(rhport, ep, true, false); } return true; @@ -662,6 +683,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8] (void) rhport; max3421_ep_t* ep = find_opened_ep(daddr, 0, 0); + ep->ep_dir = 0; ep->total_len = 8; ep->xferred_len = 0; @@ -715,18 +737,13 @@ static void handle_xfer_done(uint8_t rhport) { }else { // NAK on non-control, find next pending to switch max3421_ep_t *next_ep = find_next_pending_ep(ep); - TU_ASSERT(next_ep, ); if (ep == next_ep) { // only one pending, retry immediately hxfr_write(rhport, _hcd_data.hxfr, true); - }else { + }else if (next_ep) { // switch to next pending TODO could have issue with double buffered if not clear previously out data - if ( ep_dir ) { - xact_in(rhport, next_ep, true, true); - } else { - xact_out(rhport, next_ep, true, true); - } + xact_inout(rhport, next_ep, true, true); } } return; @@ -744,8 +761,8 @@ static void handle_xfer_done(uint8_t rhport) { // short packet or all bytes transferred if ( ep->xfer_complete ) { - // save data toggle - ep->data_toggle = (hrsl & HRSL_RCVTOGRD) ? 1 : 0; + uint8_t const dt = (hrsl & HRSL_RCVTOGRD) ? 1 : 0; // save data toggle + xfer_complete_isr(rhport, ep, xfer_result, dt); hcd_event_xfer_complete(_hcd_data.peraddr, TUSB_DIR_IN_MASK | ep_num, ep->xferred_len, xfer_result, true); }else { // more to transfer @@ -767,8 +784,8 @@ static void handle_xfer_done(uint8_t rhport) { ep->buf += xact_len; if (xact_len < ep->packet_size || ep->xferred_len >= ep->total_len) { - // save data toggle - ep->data_toggle = (hrsl & HRSL_SNDTOGRD) ? 1 : 0; + uint8_t const dt = (hrsl & HRSL_SNDTOGRD) ? 1 : 0; // save data toggle + xfer_complete_isr(rhport, ep, xfer_result, dt); hcd_event_xfer_complete(_hcd_data.peraddr, ep_num, ep->xferred_len, xfer_result, true); } else { xact_out(rhport, ep, false, true); -- cgit v1.3.1 From 3b0ffd0f488671f1bafa4bcd9e22dd51f8bb6dee Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Sep 2023 15:51:03 +0700 Subject: change hcd_int_handler(rhport, in_isr) signature: add in_isr change tuh_int_handler() to take in_isr as optional parameter (default = true) --- examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/imxrt/family.c | 4 +- hw/bsp/kinetis_kl/family.c | 2 +- hw/bsp/kinetis_kl/family.cmake | 75 ++++++++++---------- .../lpc17/boards/lpcxpresso1769/lpcxpresso1769.c | 2 +- hw/bsp/lpc17/boards/mbed1768/mbed1768.c | 2 +- hw/bsp/lpc18/family.c | 55 ++++++--------- hw/bsp/lpc40/family.c | 2 +- hw/bsp/lpc43/family.c | 4 +- hw/bsp/msp432e4/family.c | 2 +- hw/bsp/ngx4330/ngx4330.c | 4 +- hw/bsp/nrf/family.c | 2 +- hw/bsp/ra/family.c | 6 +- hw/bsp/rx/boards/rx65n_target/rx65n_target.c | 2 +- hw/bsp/samd21/family.c | 2 +- hw/bsp/samd51/family.c | 2 +- hw/bsp/stm32g4/family.cmake | 81 +++++++++++----------- hw/bsp/tm4c123/family.c | 2 +- src/common/tusb_common.h | 2 - src/common/tusb_timeout.h | 80 --------------------- src/common/tusb_verify.h | 52 +++++--------- src/host/hcd.h | 2 +- src/host/usbh.h | 11 ++- src/portable/analog/max3421/hcd_max3421.c | 3 +- src/portable/ehci/ehci.c | 4 +- src/portable/mentor/musb/hcd_musb.c | 4 +- src/portable/nxp/khci/hcd_khci.c | 7 +- src/portable/ohci/ohci.c | 5 +- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 4 +- src/portable/renesas/rusb2/hcd_rusb2.c | 5 +- src/portable/template/hcd_template.c | 3 +- src/tusb.h | 4 +- 35 files changed, 172 insertions(+), 267 deletions(-) delete mode 100644 src/common/tusb_timeout.h (limited to 'src/host/hcd.h') diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 3837ac8a2..fee10f9e2 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -1,3 +1,4 @@ +mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X mcu:LPC18XX diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index ec95a8b24..32d89f794 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -188,7 +188,7 @@ void USB_OTG1_IRQHandler(void) #endif #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } @@ -199,7 +199,7 @@ void USB_OTG2_IRQHandler(void) #endif #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1); + tuh_int_handler(1, true); #endif } diff --git a/hw/bsp/kinetis_kl/family.c b/hw/bsp/kinetis_kl/family.c index 3e9aa83a4..c436be3e6 100644 --- a/hw/bsp/kinetis_kl/family.c +++ b/hw/bsp/kinetis_kl/family.c @@ -39,7 +39,7 @@ void USB0_IRQHandler(void) { #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif #if CFG_TUD_ENABLED tud_int_handler(0); diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index 793ef1783..4151979a0 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -22,48 +22,47 @@ set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/drivers/gpio/fsl_gpio.c - ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c - ${SDK_DIR}/drivers/uart/fsl_uart.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/gpio - ${SDK_DIR}/drivers/lpsci - ${SDK_DIR}/drivers/port - ${SDK_DIR}/drivers/smc - ${SDK_DIR}/drivers/uart - ) + if (TARGET ${BOARD_TARGET}) + return() + endif () - update_board(${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/drivers/gpio/fsl_gpio.c + ${SDK_DIR}/drivers/lpsci/fsl_lpsci.c + ${SDK_DIR}/drivers/uart/fsl_uart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/gpio + ${SDK_DIR}/drivers/lpsci + ${SDK_DIR}/drivers/port + ${SDK_DIR}/drivers/smc + ${SDK_DIR}/drivers/uart + ) + update_board(${BOARD_TARGET}) - # LD_FILE and STARTUP_FILE can be defined in board.cmake + # LD_FILE and STARTUP_FILE can be defined in board.cmake + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c index c7d655368..8c26b906f 100644 --- a/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c +++ b/hw/bsp/lpc17/boards/lpcxpresso1769/lpcxpresso1769.c @@ -37,7 +37,7 @@ void USB_IRQHandler(void) #endif #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } diff --git a/hw/bsp/lpc17/boards/mbed1768/mbed1768.c b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c index b2c92d640..613dcb570 100644 --- a/hw/bsp/lpc17/boards/mbed1768/mbed1768.c +++ b/hw/bsp/lpc17/boards/mbed1768/mbed1768.c @@ -151,7 +151,7 @@ void USB_IRQHandler(void) #endif #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index b11f4fe0e..e6abecb4b 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -43,25 +43,23 @@ //--------------------------------------------------------------------+ // USB Interrupt Handler //--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ +void USB0_IRQHandler(void) { #if PORT_SUPPORT_DEVICE(0) - tud_int_handler(0); + tud_int_handler(0); #endif #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0); + tuh_int_handler(0, true); #endif } -void USB1_IRQHandler(void) -{ +void USB1_IRQHandler(void) { #if PORT_SUPPORT_DEVICE(1) - tud_int_handler(1); + tud_int_handler(1); #endif #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1); + tuh_int_handler(1, true); #endif } @@ -74,28 +72,26 @@ const uint32_t OscRateIn = 12000000; const uint32_t ExtRateIn = 0; // Invoked by startup code -void SystemInit(void) -{ +void SystemInit(void) { #ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); + extern void (*const g_pfnVectors[])(void); unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; + *pSCB_VTOR = (unsigned int) g_pfnVectors; #endif board_lpc18_pinmux(); - #ifdef TRACE_ETM +#ifdef TRACE_ETM // Trace clock is limited to 60MHz, limit CPU clock to 120MHz Chip_SetupCoreClock(CLKIN_CRYSTAL, 120000000UL, true); - #else +#else // CPU clock max to 180 Mhz Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true); - #endif +#endif } -void board_init(void) -{ +void board_init(void) { SystemCoreClockUpdate(); #if CFG_TUSB_OS == OPT_OS_NONE @@ -135,27 +131,22 @@ void board_init(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ +void board_led_write(bool state) { Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); } -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { // active low return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; } -int board_uart_read(uint8_t* buf, int len) -{ +int board_uart_read(uint8_t *buf, int len) { return Chip_UART_Read(UART_DEV, buf, len); } -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; iINTFLAG.reg = EIC_INTFLAG_EXTINT(1 << MAX3421_INTR_EIC_ID); // Call the TinyUSB interrupt handler - tuh_int_handler(1); + tuh_int_handler(1, true); } void tuh_max3421_int_api(uint8_t rhport, bool enabled) { diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 2cf00c7af..268d60e48 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -296,7 +296,7 @@ void MAX3421_EIC_Handler(void) { EIC->INTFLAG.reg = EIC_INTFLAG_EXTINT(1 << MAX3421_INTR_EIC_ID); // Call the TinyUSB interrupt handler - tuh_int_handler(1); + tuh_int_handler(1, true); } void tuh_max3421_int_api(uint8_t rhport, bool enabled) { diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 675a96c74..f8cabcbe5 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -26,50 +26,47 @@ set(FAMILY_MCUS STM32G4 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc - ) - target_compile_options(${BOARD_TARGET} PUBLIC + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + # nanolib + --specs=nosys.specs + --specs=nano.specs ) - target_compile_definitions(${BOARD_TARGET} PUBLIC + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c index ad5ae505f..738bc3fa0 100644 --- a/hw/bsp/tm4c123/family.c +++ b/hw/bsp/tm4c123/family.c @@ -8,7 +8,7 @@ void USB0_Handler(void) { #if CFG_TUH_ENABLED - tuh_int_handler(0); + tuh_int_handler(0, true); #endif #if CFG_TUD_ENABLED diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 6fffed11c..caeb5f2ef 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -75,8 +75,6 @@ #include "tusb_types.h" #include "tusb_debug.h" -#include "tusb_timeout.h" // TODO remove - //--------------------------------------------------------------------+ // Optional API implemented by application if needed // TODO move to a more ovious place/file diff --git a/src/common/tusb_timeout.h b/src/common/tusb_timeout.h deleted file mode 100644 index 533e67ab8..000000000 --- a/src/common/tusb_timeout.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/** \ingroup Group_Common Common Files - * \defgroup Group_TimeoutTimer timeout timer - * @{ */ - -#ifndef _TUSB_TIMEOUT_H_ -#define _TUSB_TIMEOUT_H_ - -#include -#include - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct { - uint32_t start; - uint32_t interval; -}tu_timeout_t; - -#if 0 - -extern uint32_t tusb_hal_millis(void); - -static inline void tu_timeout_set(tu_timeout_t* tt, uint32_t msec) -{ - tt->interval = msec; - tt->start = tusb_hal_millis(); -} - -static inline bool tu_timeout_expired(tu_timeout_t* tt) -{ - return ( tusb_hal_millis() - tt->start ) >= tt->interval; -} - -// For used with periodic event to prevent drift -static inline void tu_timeout_reset(tu_timeout_t* tt) -{ - tt->start += tt->interval; -} - -static inline void tu_timeout_restart(tu_timeout_t* tt) -{ - tt->start = tusb_hal_millis(); -} - -#endif - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_TIMEOUT_H_ */ - -/** @} */ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 12355e8be..1b5f53dfc 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -56,12 +56,8 @@ * #define TU_VERIFY(cond) if(cond) return false; * #define TU_VERIFY(cond,ret) if(cond) return ret; * - * #define TU_VERIFY_HDLR(cond,handler) if(cond) {handler; return false;} - * #define TU_VERIFY_HDLR(cond,ret,handler) if(cond) {handler; return ret;} - * * #define TU_ASSERT(cond) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return false;} * #define TU_ASSERT(cond,ret) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return ret;} - * *------------------------------------------------------------------*/ #ifdef __cplusplus @@ -97,40 +93,23 @@ #define TU_BREAKPOINT() do {} while (0) #endif -/*------------------------------------------------------------------*/ -/* Macro Generator - *------------------------------------------------------------------*/ - // Helper to implement optional parameter for TU_VERIFY Macro family #define _GET_3RD_ARG(arg1, arg2, arg3, ...) arg3 -#define _GET_4TH_ARG(arg1, arg2, arg3, arg4, ...) arg4 - -/*------------- Generator for TU_VERIFY and TU_VERIFY_HDLR -------------*/ -#define TU_VERIFY_DEFINE(_cond, _handler, _ret) do \ -{ \ - if ( !(_cond) ) { _handler; return _ret; } \ -} while(0) /*------------------------------------------------------------------*/ /* TU_VERIFY * - TU_VERIFY_1ARGS : return false if failed * - TU_VERIFY_2ARGS : return provided value if failed *------------------------------------------------------------------*/ -#define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, , false) -#define TU_VERIFY_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, , _ret) +#define TU_VERIFY_DEFINE(_cond, _ret) \ + do { \ + if ( !(_cond) ) { return _ret; } \ + } while(0) -#define TU_VERIFY(...) _GET_3RD_ARG(__VA_ARGS__, TU_VERIFY_2ARGS, TU_VERIFY_1ARGS, UNUSED)(__VA_ARGS__) +#define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, false) +#define TU_VERIFY_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, _ret) - -/*------------------------------------------------------------------*/ -/* TU_VERIFY WITH HANDLER - * - TU_VERIFY_HDLR_2ARGS : execute handler, return false if failed - * - TU_VERIFY_HDLR_3ARGS : execute handler, return provided error if failed - *------------------------------------------------------------------*/ -#define TU_VERIFY_HDLR_2ARGS(_cond, _handler) TU_VERIFY_DEFINE(_cond, _handler, false) -#define TU_VERIFY_HDLR_3ARGS(_cond, _handler, _ret) TU_VERIFY_DEFINE(_cond, _handler, _ret) - -#define TU_VERIFY_HDLR(...) _GET_4TH_ARG(__VA_ARGS__, TU_VERIFY_HDLR_3ARGS, TU_VERIFY_HDLR_2ARGS,UNUSED)(__VA_ARGS__) +#define TU_VERIFY(...) _GET_3RD_ARG(__VA_ARGS__, TU_VERIFY_2ARGS, TU_VERIFY_1ARGS, _dummy)(__VA_ARGS__) /*------------------------------------------------------------------*/ /* ASSERT @@ -138,19 +117,20 @@ * - 1 arg : return false if failed * - 2 arg : return error if failed *------------------------------------------------------------------*/ -#define ASSERT_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, _MESS_FAILED(); TU_BREAKPOINT(), false) -#define ASSERT_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, _MESS_FAILED(); TU_BREAKPOINT(), _ret) +#define TU_ASSERT_DEFINE(_cond, _ret) \ + do { \ + if ( !(_cond) ) { _MESS_FAILED(); TU_BREAKPOINT(); return _ret; } \ + } while(0) + +#define TU_ASSERT_1ARGS(_cond) TU_ASSERT_DEFINE(_cond, false) +#define TU_ASSERT_2ARGS(_cond, _ret) TU_ASSERT_DEFINE(_cond, _ret) #ifndef TU_ASSERT -#define TU_ASSERT(...) _GET_3RD_ARG(__VA_ARGS__, ASSERT_2ARGS, ASSERT_1ARGS,UNUSED)(__VA_ARGS__) +#define TU_ASSERT(...) _GET_3RD_ARG(__VA_ARGS__, TU_ASSERT_2ARGS, TU_ASSERT_1ARGS, _dummy)(__VA_ARGS__) #endif -/*------------------------------------------------------------------*/ -/* ASSERT HDLR - *------------------------------------------------------------------*/ - #ifdef __cplusplus } #endif -#endif /* TUSB_VERIFY_H_ */ +#endif diff --git a/src/host/hcd.h b/src/host/hcd.h index e25b20ea3..2bde289df 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -131,7 +131,7 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_AT bool hcd_init(uint8_t rhport); // Interrupt Handler -void hcd_int_handler(uint8_t rhport); +void hcd_int_handler(uint8_t rhport, bool in_isr); // Enable USB interrupt void hcd_int_enable (uint8_t rhport); diff --git a/src/host/usbh.h b/src/host/usbh.h index 684e8240e..770d70dfe 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -124,11 +124,16 @@ void tuh_task(void) { bool tuh_task_event_ready(void); #ifndef _TUSB_HCD_H_ -extern void hcd_int_handler(uint8_t rhport); +extern void hcd_int_handler(uint8_t rhport, bool in_isr); #endif -// Interrupt handler, name alias to HCD -#define tuh_int_handler hcd_int_handler +// Interrupt handler alias to HCD with in_isr as optional parameter +// - tuh_int_handler(rhport) --> hcd_int_handler(rhport, true) +// - tuh_int_handler(rhport, in_isr) --> hcd_int_handler(rhport, in_isr) +// Note: this is similar to TU_VERIFY(), _GET_3RD_ARG() is defined in tusb_verify.h +#define _tuh_int_handler_1arg(_rhport) hcd_int_handler(_rhport, true) +#define _tuh_int_hanlder_2arg(_rhport, _in_isr) hcd_int_handler(_rhport, _in_isr) +#define tuh_int_handler(...) _GET_3RD_ARG(__VA_ARGS__, _tuh_int_hanlder_2arg, _tuh_int_handler_1arg, _dummy)(__VA_ARGS__) // Check if roothub port is initialized and active as a host bool tuh_rhport_is_active(uint8_t rhport); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 238b518a0..d013d6179 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -863,7 +863,8 @@ void print_hirq(uint8_t hirq) { #endif // Interrupt Handler -void hcd_int_handler(uint8_t rhport) { +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; uint8_t hirq = reg_read(rhport, HIRQ_ADDR, true) & _hcd_data.hien; if (!hirq) return; // print_hirq(hirq); diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index c93c33fc0..572b9826c 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -656,8 +656,8 @@ void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) } //------------- Host Controller Driver's Interrupt Handler -------------// -void hcd_int_handler(uint8_t rhport) -{ +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; ehci_registers_t* regs = ehci_data.regs; uint32_t const int_status = regs->status; diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 02090df85..5312c2812 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -847,8 +847,10 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { /*------------------------------------------------------------------- * ISR *-------------------------------------------------------------------*/ -void hcd_int_handler(uint8_t rhport) +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; + uint_fast8_t is, txis, rxis; is = USB0->IS; /* read and clear interrupt status */ diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 55327e02d..57684b259 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -447,6 +447,10 @@ void hcd_port_reset(uint8_t rhport) _hcd.need_reset = false; } +void hcd_port_reset_end(uint8_t rhport) { + (void) rhport; +} + tusb_speed_t hcd_port_speed_get(uint8_t rhport) { (void)rhport; @@ -583,8 +587,9 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { /*--------------------------------------------------------------------+ * ISR *--------------------------------------------------------------------+*/ -void hcd_int_handler(uint8_t rhport) +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; uint32_t is = KHCI->ISTAT; uint32_t msk = KHCI->INTEN; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 413e72037..f978b0965 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -667,8 +667,9 @@ static void done_queue_isr(uint8_t hostid) } } -void hcd_int_handler(uint8_t hostid) -{ +void hcd_int_handler(uint8_t hostid, bool in_isr) { + (void) in_isr; + uint32_t const int_en = OHCI_REG->interrupt_enable; uint32_t const int_status = OHCI_REG->interrupt_status & int_en; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 21dc3f67d..4ed6d36bb 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -252,9 +252,9 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) } } -void __tusb_irq_path_func(hcd_int_handler)(uint8_t rhport) -{ +void __tusb_irq_path_func(hcd_int_handler)(uint8_t rhport, bool in_isr) { (void) rhport; + (void) in_isr; hcd_rp2040_irq(); } diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 790cd6b32..bf95be707 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -771,8 +771,9 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { //--------------------------------------------------------------------+ // ISR //--------------------------------------------------------------------+ -void hcd_int_handler(uint8_t rhport) -{ +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; + rusb2_reg_t* rusb = RUSB2_REG(rhport); unsigned is0 = rusb->INTSTS0; unsigned is1 = rusb->INTSTS1; diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index 3e3b91558..b073d6057 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -51,8 +51,9 @@ bool hcd_init(uint8_t rhport) { } // Interrupt Handler -void hcd_int_handler(uint8_t rhport) { +void hcd_int_handler(uint8_t rhport, bool in_isr) { (void) rhport; + (void) in_isr; } // Enable USB interrupt diff --git a/src/tusb.h b/src/tusb.h index d6534ca28..c9d56d3c3 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -66,7 +66,7 @@ #endif #else #ifndef tuh_int_handler - #define tuh_int_handler(_x) + #define tuh_int_handler(...) #endif #endif @@ -123,7 +123,7 @@ #endif #else #ifndef tud_int_handler - #define tud_int_handler(_x) + #define tud_int_handler(...) #endif #endif -- cgit v1.3.1 From 74bd2647589790b3bee49146774133c2061a34fe Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Mar 2024 11:42:33 +0700 Subject: adding deinit() stub for usbh/hcd class driver add TUSB_VERSION_BUILD, also add TUSB_VERSION_NUMBER --- src/class/cdc/cdc_host.c | 4 ++++ src/class/cdc/cdc_host.h | 1 + src/class/hid/hid_host.c | 4 ++++ src/class/hid/hid_host.h | 1 + src/class/msc/msc_host.c | 5 +++++ src/class/msc/msc_host.h | 1 + src/host/hcd.h | 3 +++ src/host/hub.c | 7 ++++-- src/host/hub.h | 1 + src/host/usbh.c | 55 ++++++++++++++++++++++++++++++++++++------------ src/host/usbh.h | 4 ++++ src/host/usbh_pvt.h | 4 +--- src/tusb_option.h | 5 +++++ 13 files changed, 76 insertions(+), 19 deletions(-) (limited to 'src/host/hcd.h') diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 2fb37d835..14f380b40 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -637,6 +637,10 @@ void cdch_init(void) { } } +bool cdch_deinit(void) { + return true; +} + void cdch_close(uint8_t daddr) { for (uint8_t idx = 0; idx < CFG_TUH_CDC; idx++) { cdch_interface_t* p_cdc = &cdch_data[idx]; diff --git a/src/class/cdc/cdc_host.h b/src/class/cdc/cdc_host.h index d512a23a5..7530b1e9d 100644 --- a/src/class/cdc/cdc_host.h +++ b/src/class/cdc/cdc_host.h @@ -193,6 +193,7 @@ TU_ATTR_WEAK extern void tuh_cdc_tx_complete_cb(uint8_t idx); // Internal Class Driver API //--------------------------------------------------------------------+ void cdch_init (void); +bool cdch_deinit (void); bool cdch_open (uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len); bool cdch_set_config (uint8_t dev_addr, uint8_t itf_num); bool cdch_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes); diff --git a/src/class/hid/hid_host.c b/src/class/hid/hid_host.c index 7330fa237..16e2d3c2c 100644 --- a/src/class/hid/hid_host.c +++ b/src/class/hid/hid_host.c @@ -376,6 +376,10 @@ void hidh_init(void) { tu_memclr(_hidh_itf, sizeof(_hidh_itf)); } +bool hidh_deinit(void) { + return true; +} + bool hidh_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) result; diff --git a/src/class/hid/hid_host.h b/src/class/hid/hid_host.h index 17f4e27c0..9ea222b3d 100644 --- a/src/class/hid/hid_host.h +++ b/src/class/hid/hid_host.h @@ -164,6 +164,7 @@ TU_ATTR_WEAK void tuh_hid_set_protocol_complete_cb(uint8_t dev_addr, uint8_t idx // Internal Class Driver API //--------------------------------------------------------------------+ void hidh_init(void); +bool hidh_deinit(void); bool hidh_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const* desc_itf, uint16_t max_len); bool hidh_set_config(uint8_t dev_addr, uint8_t itf_num); bool hidh_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index 39f2d9f1c..61ecb8e4e 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -288,6 +288,11 @@ void msch_init(void) { tu_memclr(_msch_itf, sizeof(_msch_itf)); } +bool msch_deinit(void) { + return true; +} + + void msch_close(uint8_t dev_addr) { TU_VERIFY(dev_addr <= CFG_TUH_DEVICE_MAX,); msch_interface_t* p_msc = get_itf(dev_addr); diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h index 9ca1b4703..5bf2e62e3 100644 --- a/src/class/msc/msc_host.h +++ b/src/class/msc/msc_host.h @@ -114,6 +114,7 @@ TU_ATTR_WEAK void tuh_msc_umount_cb(uint8_t dev_addr); //--------------------------------------------------------------------+ void msch_init (void); +bool msch_deinit (void); bool msch_open (uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); bool msch_set_config (uint8_t dev_addr, uint8_t itf_num); void msch_close (uint8_t dev_addr); diff --git a/src/host/hcd.h b/src/host/hcd.h index 2bde289df..d5804c608 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -130,6 +130,9 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_AT // Initialize controller to host mode bool hcd_init(uint8_t rhport); +// De-initialize controller +bool hcd_deinit(uint8_t rhport); + // Interrupt Handler void hcd_int_handler(uint8_t rhport, bool in_isr); diff --git a/src/host/hub.c b/src/host/hub.c index 3bac18698..0853ff27a 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -182,11 +182,14 @@ bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, //--------------------------------------------------------------------+ // CLASS-USBH API (don't require to verify parameters) //--------------------------------------------------------------------+ -void hub_init(void) -{ +void hub_init(void) { tu_memclr(hub_data, sizeof(hub_data)); } +bool hub_deinit(void) { + return true; +} + bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len) { (void) rhport; diff --git a/src/host/hub.h b/src/host/hub.h index 390740e1f..c3f4a3612 100644 --- a/src/host/hub.h +++ b/src/host/hub.h @@ -205,6 +205,7 @@ static inline bool hub_port_clear_reset_change(uint8_t hub_addr, uint8_t hub_por // Internal Class Driver API //--------------------------------------------------------------------+ void hub_init (void); +bool hub_deinit (void); bool hub_open (uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len); bool hub_set_config (uint8_t dev_addr, uint8_t itf_num); bool hub_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes); diff --git a/src/host/usbh.c b/src/host/usbh.c index 625857683..cf348bbb2 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -45,8 +45,13 @@ #endif //--------------------------------------------------------------------+ -// Callback weak stubs (called if application does not provide) +// Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ +TU_ATTR_WEAK bool hcd_deinit(uint8_t rhport) { + (void) rhport; + return false; +} + TU_ATTR_WEAK void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) { (void) rhport; (void) eventid; @@ -119,16 +124,17 @@ typedef struct { // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ #if CFG_TUSB_DEBUG >= CFG_TUH_LOG_LEVEL - #define DRIVER_NAME(_name) .name = _name, + #define DRIVER_NAME(_name) _name #else - #define DRIVER_NAME(_name) + #define DRIVER_NAME(_name) NULL #endif static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_CDC { - DRIVER_NAME("CDC") + .name = DRIVER_NAME("CDC"), .init = cdch_init, + .deinit = cdch_deinit, .open = cdch_open, .set_config = cdch_set_config, .xfer_cb = cdch_xfer_cb, @@ -138,8 +144,9 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_MSC { - DRIVER_NAME("MSC") + .name = DRIVER_NAME("MSC"), .init = msch_init, + .deinit = msch_deinit, .open = msch_open, .set_config = msch_set_config, .xfer_cb = msch_xfer_cb, @@ -149,8 +156,9 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_HID { - DRIVER_NAME("HID") + .name = DRIVER_NAME("HID"), .init = hidh_init, + .deinit = hidh_deinit, .open = hidh_open, .set_config = hidh_set_config, .xfer_cb = hidh_xfer_cb, @@ -160,8 +168,9 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_HUB { - DRIVER_NAME("HUB") + .name = DRIVER_NAME("HUB"), .init = hub_init, + .deinit = hub_deinit, .open = hub_open, .set_config = hub_set_config, .xfer_cb = hub_xfer_cb, @@ -171,9 +180,11 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_VENDOR { - DRIVER_NAME("VENDOR") + .name = DRIVER_NAME("VENDOR"), .init = cush_init, - .open = cush_open_subtask, + .deinit = cush_deinit, + .open = cush_open, + .set_config = cush_set_config, .xfer_cb = cush_isr, .close = cush_close } @@ -338,11 +349,11 @@ bool tuh_inited(void) { return _usbh_controller != TUSB_INDEX_INVALID_8; } -bool tuh_init(uint8_t controller_id) { +bool tuh_init(uint8_t rhport) { // skip if already initialized if ( tuh_inited() ) return true; - TU_LOG_USBH("USBH init on controller %u\r\n", controller_id); + TU_LOG_USBH("USBH init on controller %u\r\n", rhport); TU_LOG_INT_USBH(sizeof(usbh_device_t)); TU_LOG_INT_USBH(sizeof(hcd_event_t)); TU_LOG_INT_USBH(sizeof(_ctrl_xfer)); @@ -383,10 +394,26 @@ bool tuh_init(uint8_t controller_id) { } } - _usbh_controller = controller_id;; + _usbh_controller = rhport;; + + TU_ASSERT(hcd_init(rhport)); + hcd_int_enable(rhport); + + return true; +} + +bool tuh_deinit(uint8_t rhport) { + if (!tuh_rhport_is_active(rhport)) return true; + + hcd_int_disable(rhport); + hcd_deinit(rhport); - TU_ASSERT(hcd_init(controller_id)); - hcd_int_enable(controller_id); + _usbh_controller = TUSB_INDEX_INVALID_8; + + // no other controller is active, deinit the stack + if (!tuh_inited()) { + + } return true; } diff --git a/src/host/usbh.h b/src/host/usbh.h index 9ff118543..0e31e80a7 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -109,7 +109,11 @@ bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Init host stack bool tuh_init(uint8_t rhport); +// Deinit host stack on rhport +bool tuh_deinit(uint8_t rhport); + // Check if host stack is already initialized with any roothub ports +// To check if an rhport is initialized, use tuh_rhport_is_active() bool tuh_inited(void); // Task function should be called in main/rtos loop, extended version of tuh_task() diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index 4ed2a72b5..204315175 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -50,11 +50,9 @@ enum { //--------------------------------------------------------------------+ typedef struct { - #if CFG_TUSB_DEBUG >= CFG_TUH_LOG_LEVEL char const* name; - #endif - void (* const init )(void); + bool (* const deinit )(void); bool (* const open )(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const * itf_desc, uint16_t max_len); bool (* const set_config )(uint8_t dev_addr, uint8_t itf_num); bool (* const xfer_cb )(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); diff --git a/src/tusb_option.h b/src/tusb_option.h index 96378cb80..22f27e9e1 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -29,9 +29,14 @@ #include "common/tusb_compiler.h" +// Version is release as major.minor.revision eg 1.0.0. though there could be notable APIs before a new release. +// For notable API changes within a release, we increase the build number. #define TUSB_VERSION_MAJOR 0 #define TUSB_VERSION_MINOR 16 #define TUSB_VERSION_REVISION 0 +#define TUSB_VERSION_BUILD 1 + +#define TUSB_VERSION_NUMBER (TUSB_VERSION_MAJOR << 24 | TUSB_VERSION_MINOR << 16 | TUSB_VERSION_REVISION << 8 | TUSB_VERSION_BUILD) #define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION) //--------------------------------------------------------------------+ -- cgit v1.3.1 From 7d3d60f96de3f6e15291c9302463c294e2dc98de Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 2 Apr 2024 16:38:40 +0700 Subject: add hcd_configure() to change max NAK dynamically --- src/host/hcd.h | 2 +- src/host/usbh.c | 13 ++++++++----- src/host/usbh.h | 14 ++++++++++++-- src/portable/analog/max3421/hcd_max3421.c | 17 +++++++++++------ src/tusb_option.h | 1 - 5 files changed, 32 insertions(+), 15 deletions(-) (limited to 'src/host/hcd.h') diff --git a/src/host/hcd.h b/src/host/hcd.h index d5804c608..5547c7cc5 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -125,7 +125,7 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W //--------------------------------------------------------------------+ // optional hcd configuration, called by tuh_configure() -bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_ATTR_WEAK; +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Initialize controller to host mode bool hcd_init(uint8_t rhport); diff --git a/src/host/usbh.c b/src/host/usbh.c index 05091736e..aa0603d47 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -52,6 +52,13 @@ TU_ATTR_WEAK bool hcd_deinit(uint8_t rhport) { return false; } +TU_ATTR_WEAK bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + return false; +} + TU_ATTR_WEAK void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) { (void) rhport; (void) eventid; @@ -332,11 +339,7 @@ bool tuh_rhport_reset_bus(uint8_t rhport, bool active) { //--------------------------------------------------------------------+ bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { - if ( hcd_configure ) { - return hcd_configure(rhport, cfg_id, cfg_param); - } else { - return false; - } + return hcd_configure(rhport, cfg_id, cfg_param); } static void clear_device(usbh_device_t* dev) { diff --git a/src/host/usbh.h b/src/host/usbh.h index 0e31e80a7..57362c778 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -73,11 +73,21 @@ typedef struct { tusb_desc_interface_t desc; } tuh_itf_info_t; -// ConfigID for tuh_config() +// ConfigID for tuh_configure() enum { - TUH_CFGID_RPI_PIO_USB_CONFIGURATION = OPT_MCU_RP2040 << 8 // cfg_param: pio_usb_configuration_t + TUH_CFGID_INVALID = 0, + TUH_CFGID_RPI_PIO_USB_CONFIGURATION = 100, // cfg_param: pio_usb_configuration_t + TUH_CFGID_MAX3421 = 200, }; +typedef union { + // For TUH_CFGID_RPI_PIO_USB_CONFIGURATION use pio_usb_configuration_t + + struct { + uint8_t max_nak; + } max3421; +} tuh_configure_param_t; + //--------------------------------------------------------------------+ // APPLICATION CALLBACK //--------------------------------------------------------------------+ diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 1b182e551..12d80e0b5 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -30,6 +30,7 @@ #include #include "host/hcd.h" +#include "host/usbh.h" //--------------------------------------------------------------------+ // @@ -230,7 +231,9 @@ typedef struct { } max3421_data_t; static max3421_data_t _hcd_data; -static uint8_t _max_nak = MAX_NAK_DEFAULT; // max NAK before giving up in a usb frame + +// max NAK before giving up in a frame. 0 means infinite NAKs +static uint8_t _max_nak = MAX_NAK_DEFAULT; //--------------------------------------------------------------------+ // API: SPI transfer with MAX3421E @@ -409,10 +412,11 @@ static void free_ep(uint8_t daddr) { } } -// Check if endpoint has an queued transfer +// Check if endpoint has an queued transfer and not reach max NAK TU_ATTR_ALWAYS_INLINE static inline bool is_ep_pending(max3421_ep_t const * ep) { uint8_t const state = ep->state; - return ep->packet_size && state >= EP_STATE_ATTEMPT_1 && state < EP_STATE_ATTEMPT_1 + _max_nak; + return ep->packet_size && (state >= EP_STATE_ATTEMPT_1) && + (_max_nak == 0 || state < EP_STATE_ATTEMPT_1 + _max_nak); } // Find the next pending endpoint using round-robin scheduling, starting from next endpoint. @@ -447,10 +451,11 @@ static max3421_ep_t * find_next_pending_ep(max3421_ep_t * cur_ep) { // optional hcd configuration, called by tuh_configure() bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { (void) rhport; - (void) cfg_id; - (void) cfg_param; + TU_VERIFY(cfg_id == TUH_CFGID_MAX3421); - return false; + tuh_configure_param_t const* cfg = (tuh_configure_param_t const*) cfg_param; + _max_nak = cfg->max3421.max_nak; + return true; } // Initialize controller to host mode diff --git a/src/tusb_option.h b/src/tusb_option.h index f90fb7026..812074c44 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -144,7 +144,6 @@ #define OPT_MCU_RX72N 1402 ///< Renesas RX72N #define OPT_MCU_RAXXX 1403 ///< Renesas RAxxx families - // Mind Motion #define OPT_MCU_MM32F327X 1500 ///< Mind Motion MM32F327 -- cgit v1.3.1