From 77495cf119c89c3091e7ab05773ebce19988da86 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 20 Jul 2023 17:06:57 +0700 Subject: improve logging, allow easier to turn off usbd, driver logging can be useful when focusing on let's say usbh --- src/host/usbh.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) (limited to 'src/host') diff --git a/src/host/usbh.c b/src/host/usbh.c index 184bda23b..58129c16e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -38,17 +38,19 @@ //--------------------------------------------------------------------+ #ifndef CFG_TUH_TASK_QUEUE_SZ -#define CFG_TUH_TASK_QUEUE_SZ 16 + #define CFG_TUH_TASK_QUEUE_SZ 16 #endif #ifndef CFG_TUH_INTERFACE_MAX -#define CFG_TUH_INTERFACE_MAX 8 + #define CFG_TUH_INTERFACE_MAX 8 #endif -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define USBH_DEBUG 2 +// Level where CFG_TUSB_DEBUG must be at least for USBH is logged +#ifndef CFG_TUH_LOG_LEVEL + #define CFG_TUH_LOG_LEVEL 2 +#endif -#define TU_LOG_USBH(...) TU_LOG(USBH_DEBUG, __VA_ARGS__) +#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // USBH-HCD common data structure @@ -322,12 +324,12 @@ bool tuh_init(uint8_t controller_id) if ( tuh_inited() ) return true; TU_LOG_USBH("USBH init on controller %u\r\n", controller_id); - TU_LOG_INT(USBH_DEBUG, sizeof(usbh_device_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(hcd_event_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(_ctrl_xfer)); - TU_LOG_INT(USBH_DEBUG, sizeof(tuh_xfer_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(tu_fifo_t)); - TU_LOG_INT(USBH_DEBUG, sizeof(tu_edpt_stream_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(usbh_device_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(hcd_event_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(_ctrl_xfer)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tuh_xfer_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_fifo_t)); + TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_edpt_stream_t)); // Event queue _usbh_q = osal_queue_create( &_usbh_qdef ); @@ -565,7 +567,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) TU_LOG_USBH("[%u:%u] %s: ", rhport, daddr, (xfer->setup->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && xfer->setup->bRequest <= TUSB_REQ_SYNCH_FRAME) ? tu_str_std_request[xfer->setup->bRequest] : "Class Request"); - TU_LOG_PTR(USBH_DEBUG, xfer->setup); + TU_LOG_PTR(CFG_TUH_LOG_LEVEL, xfer->setup); TU_LOG_USBH("\r\n"); if (xfer->complete_cb) @@ -671,7 +673,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result if (request->wLength) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, dev_addr); - TU_LOG_MEM(USBH_DEBUG, _ctrl_xfer.buffer, xferred_bytes, 2); + TU_LOG_MEM(CFG_TUH_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); } _ctrl_xfer.actual_len = (uint16_t) xferred_bytes; @@ -1186,7 +1188,7 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu TU_LOG_USBH("Device unplugged address = %u\r\n", daddr); if (is_hub_addr(daddr)) { - TU_LOG(USBH_DEBUG, " is a HUB device %u\r\n", daddr); + TU_LOG(CFG_TUH_LOG_LEVEL, " is a HUB device %u\r\n", daddr); // Submit removed event If the device itself is a hub (un-rolled recursive) // TODO a better to unroll recursrive is using array of removing_hubs and mark it here @@ -1657,7 +1659,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur if( drv_id >= USBH_CLASS_DRIVER_COUNT ) { - TU_LOG(USBH_DEBUG, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", + TU_LOG(CFG_TUH_LOG_LEVEL, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); } } @@ -1695,7 +1697,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) if (is_hub_addr(dev_addr)) { - TU_LOG(USBH_DEBUG, "HUB address = %u is mounted\r\n", dev_addr); + TU_LOG(CFG_TUH_LOG_LEVEL, "HUB address = %u is mounted\r\n", dev_addr); }else { // Invoke callback if available -- cgit v1.3.1 From 16ad918d96b2bd01189906d64d0871f0ea952833 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 20 Jul 2023 17:37:06 +0700 Subject: prefer application callback over built-in driver --- src/host/usbh.c | 56 +++++++++++++++++++++++++------------------------------- 1 file changed, 25 insertions(+), 31 deletions(-) (limited to 'src/host') diff --git a/src/host/usbh.c b/src/host/usbh.c index 58129c16e..ecc672198 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -452,39 +452,28 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) TU_LOG_USBH("on EP %02X with %u bytes: %s\r\n", ep_addr, (unsigned int) event.xfer_complete.len, tu_str_xfer_result[event.xfer_complete.result]); - if (event.dev_addr == 0) - { + if (event.dev_addr == 0) { // device 0 only has control endpoint TU_ASSERT(epnum == 0, ); usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - } - else - { + } else { usbh_device_t* dev = get_device(event.dev_addr); TU_VERIFY(dev && dev->connected, ); dev->ep_status[epnum][ep_dir].busy = 0; dev->ep_status[epnum][ep_dir].claimed = 0; - if ( 0 == epnum ) - { - usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - }else - { - uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; - if(drv_id < USBH_CLASS_DRIVER_COUNT) - { - TU_LOG_USBH("%s xfer callback\r\n", usbh_class_drivers[drv_id].name); - usbh_class_drivers[drv_id].xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - } - else - { -#if CFG_TUH_API_EDPT_XFER - tuh_xfer_cb_t complete_cb = dev->ep_callback[epnum][ep_dir].complete_cb; - if ( complete_cb ) - { - tuh_xfer_t xfer = - { + if ( 0 == epnum ) { + usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, + event.xfer_complete.len); + }else { + // Prefer application callback over built-in one if available. This occurs when tuh_edpt_xfer() is used + // with enabled driver e.g HID endpoint + #if CFG_TUH_API_EDPT_XFER + tuh_xfer_cb_t const complete_cb = dev->ep_callback[epnum][ep_dir].complete_cb; + if ( complete_cb ) { + // re-construct xfer info + tuh_xfer_t xfer = { .daddr = event.dev_addr, .ep_addr = ep_addr, .result = event.xfer_complete.result, @@ -493,16 +482,21 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) .buffer = NULL, // not available .complete_cb = complete_cb, .user_data = dev->ep_callback[epnum][ep_dir].user_data - }; + }; - complete_cb(&xfer); - }else -#endif - { + complete_cb(&xfer); + }else + #endif + { + uint8_t const drv_id = dev->ep2drv[epnum][ep_dir]; + if ( drv_id < USBH_CLASS_DRIVER_COUNT ) { + TU_LOG_USBH("%s xfer callback\r\n", usbh_class_drivers[drv_id].name); + usbh_class_drivers[drv_id].xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, + event.xfer_complete.len); + } else { // no driver/callback responsible for this transfer - TU_ASSERT(false, ); + TU_ASSERT(false,); } - } } } -- cgit v1.3.1 From 1cc7c5d0309bcc7c6930fba78bc461e5822e8024 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 20 Jul 2023 11:20:12 +0700 Subject: add hcd_edpt_abort_xfer() API --- examples/dual/host_hid_to_device_cdc/only.txt | 1 + src/host/hcd.h | 3 +++ src/host/usbh.c | 28 +++++++++++++++++++-------- src/host/usbh.h | 7 +++++-- src/portable/ehci/ehci.c | 18 +++++++++++++++++ 5 files changed, 47 insertions(+), 10 deletions(-) (limited to 'src/host') diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index 6ee8e3fde..de5d8bed9 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -1,3 +1,4 @@ board:mimxrt1060_evk board:mimxrt1064_evk +board:mcb1800 mcu:RP2040 diff --git a/src/host/hcd.h b/src/host/hcd.h index 3355c18b2..cbfffb349 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -171,6 +171,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); +// Abort a queued transfer. Note: it can only abort transfer that has not been started +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); + // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); diff --git a/src/host/usbh.c b/src/host/usbh.c index ecc672198..bbf333d5f 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -710,6 +710,19 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer) return true; } +bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { + usbh_device_t* dev = get_device(daddr); + TU_VERIFY(dev); + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + // skip if not busy + if (!dev->ep_status[epnum][dir].busy) return true; + + return hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); +} + //--------------------------------------------------------------------+ // USBH API For Class Driver //--------------------------------------------------------------------+ @@ -741,7 +754,7 @@ void usbh_int_set(bool enabled) // Endpoint API //--------------------------------------------------------------------+ -// TODO has some duplication code with device, refactor later +// Claim an endpoint for transfer bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer @@ -757,7 +770,7 @@ bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) return true; } -// TODO has some duplication code with device, refactor later +// Release an claimed endpoint due to failed transfer attempt bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer @@ -773,7 +786,7 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) return true; } -// TODO has some duplication code with device, refactor later +// Submit an transfer bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { @@ -840,14 +853,13 @@ bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep) return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } -bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - +bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + return dev->ep_status[epnum][dir].busy; } diff --git a/src/host/usbh.h b/src/host/usbh.h index 0f969a46a..d765f6744 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -172,8 +172,11 @@ bool tuh_control_xfer(tuh_xfer_t* xfer); // - sync : blocking if complete callback is NULL. bool tuh_edpt_xfer(tuh_xfer_t* xfer); -// Open an non-control endpoint -bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep); +// Open a non-control endpoint +bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); // Set Configuration (control transfer) // config_num = 0 will un-configure device. Note: config_num = config_descriptor_index + 1 diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 38711e382..fd33d6cfc 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -510,6 +510,24 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; + +// uint8_t const epnum = tu_edpt_number(ep_addr); +// ehci_qhd_t* qhd; +// +// // TODO ISO not supported +// if (epnum == 0) { +// qhd = qhd_control(dev_addr); +// }else { +// qhd = qhd_get_from_addr(dev_addr, ep_addr); +// } +} + bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) { ehci_qhd_t *qhd = qhd_get_from_addr(daddr, ep_addr); -- cgit v1.3.1 From c122e9df73331fa60d1713c7cc4cf46251b0cd76 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 21 Jul 2023 19:06:36 +0700 Subject: implement hcd_edpt_abort_xfer() for EHCI, also move thing around a bit --- src/common/tusb_common.h | 2 + src/host/hcd.h | 1 + src/host/usbh.c | 10 ++- src/host/usbh.h | 1 + src/portable/ehci/ehci.c | 200 +++++++++++++++++++++++++++++------------------ src/portable/ehci/ehci.h | 19 +++-- 6 files changed, 147 insertions(+), 86 deletions(-) (limited to 'src/host') diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 957491aa9..b3d9fc7cd 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -53,6 +53,8 @@ #define U32_TO_U8S_LE(_u32) TU_U32_BYTE0(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE3(_u32) #define TU_BIT(n) (1UL << (n)) + +// Generate a mask with bit from high (31) to low (0) set, e.g TU_GENMASK(3, 0) = 0b1111 #define TU_GENMASK(h, l) ( (UINT32_MAX << (l)) & (UINT32_MAX >> (31 - (h))) ) //--------------------------------------------------------------------+ diff --git a/src/host/hcd.h b/src/host/hcd.h index cbfffb349..90bfd79db 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -172,6 +172,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); // Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked diff --git a/src/host/usbh.c b/src/host/usbh.c index bbf333d5f..15c48be47 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -718,9 +718,15 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { uint8_t const dir = tu_edpt_dir(ep_addr); // skip if not busy - if (!dev->ep_status[epnum][dir].busy) return true; + TU_VERIFY(dev->ep_status[epnum][dir].busy); - return hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); + bool const ret = hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); + if (ret) { + // mark as ready if transfer is aborted + dev->ep_status[epnum][dir].busy = false; + } + + return ret; } //--------------------------------------------------------------------+ diff --git a/src/host/usbh.h b/src/host/usbh.h index d765f6744..0d56f40c9 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -176,6 +176,7 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer); bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); // Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); // Set Configuration (control transfer) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 0a26986d5..6388add08 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -48,8 +48,8 @@ #ifdef TUP_USBIP_CHIPIDEA_HS // NXP Transdimension: 8 elements #define FRAMELIST_SIZE_BIT_VALUE 7u - #define FRAMELIST_SIZE_USBCMD_VALUE (((FRAMELIST_SIZE_BIT_VALUE & 3) << EHCI_USBCMD_POS_FRAMELIST_SIZE) | \ - ((FRAMELIST_SIZE_BIT_VALUE >> 2) << EHCI_USBCMD_POS_NXP_FRAMELIST_SIZE_MSB)) + #define FRAMELIST_SIZE_USBCMD_VALUE (((FRAMELIST_SIZE_BIT_VALUE & 3) << EHCI_USBCMD_FRAMELIST_SIZE_SHIFT) | \ + ((FRAMELIST_SIZE_BIT_VALUE >> 2) << EHCI_USBCMD_CHIPIDEA_FRAMELIST_SIZE_MSB_SHIFT)) #else // STD EHCI: 256 elements #define FRAMELIST_SIZE_BIT_VALUE 2u @@ -132,24 +132,46 @@ TU_ATTR_WEAK void hcd_dcache_clean(void const* addr, uint32_t data_size) { (void TU_ATTR_WEAK void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; } TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; } -TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); -TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); - TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr); TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_next (ehci_qhd_t const * p_qhd); TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_find_free (void); static ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd); +static void qhd_remove_qtd(ehci_qhd_t *qhd); TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr); TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_find_free (void); static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes); -static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); -static inline ehci_link_t* list_next (ehci_link_t const *p_link); +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); +TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next (ehci_link_t const *p_link); static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr); +static void ehci_disable_schedule(ehci_registers_t* regs, bool is_period) { + // maybe have a timeout for status + if (is_period) { + regs->command_bm.periodic_enable = 0; + while(regs->status_bm.periodic_status) {} + } else { + regs->command_bm.async_enable = 0; + while(regs->status_bm.async_status) {} // should have a timeout + } +} + +static void ehci_enable_schedule(ehci_registers_t* regs, bool is_period) { + // maybe have a timeout for status + if (is_period) { + regs->command_bm.periodic_enable = 1; + while ( 0 == regs->status_bm.periodic_status ) {} + } else { + regs->command_bm.async_enable = 1; + while( 0 == regs->status_bm.async_status ) {} + } +} + //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ @@ -204,43 +226,6 @@ tusb_speed_t hcd_port_speed_get(uint8_t rhport) return (tusb_speed_t) ehci_data.regs->portsc_bm.nxp_port_speed; // NXP specific port speed } -static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { - ehci_link_t* prev = list_head; - - while (prev && !prev->terminate) { - ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); - - // done if loop back to head - if ( (uintptr_t) qhd == (uintptr_t) list_head) { - break; - } - - if ( qhd->dev_addr == dev_addr ) { - // TODO deactivate all TD, wait for QHD to inactive before removal - prev->address = qhd->next.address; - - // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) - qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); - - if ( qhd->int_smask ) - { - // period list queue element is guarantee to be free in the next frame (1 ms) - qhd->used = 0; - }else - { - // async list use async advance handshake - // mark as removing, will completely re-usable when async advance isr occurs - qhd->removing = 1; - } - - hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); - hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); - }else { - prev = list_next(prev); - } - } -} - // Close all opened endpoint belong to this device void hcd_device_close(uint8_t rhport, uint8_t daddr) { @@ -347,8 +332,7 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) regs->nxp_tt_control = 0; //------------- USB CMD Register -------------// - regs->command |= TU_BIT(EHCI_USBCMD_POS_RUN_STOP) | TU_BIT(EHCI_USBCMD_POS_ASYNC_ENABLE) | - TU_BIT(EHCI_USBCMD_POS_PERIOD_ENABLE) | // TODO enable period list only there is int/iso endpoint + regs->command |= EHCI_USBCMD_RUN_STOP | EHCI_USBCMD_PERIOD_SCHEDULE_ENABLE | EHCI_USBCMD_ASYNC_SCHEDULE_ENABLE | FRAMELIST_SIZE_USBCMD_VALUE; //------------- ConfigFlag Register (skip) -------------// @@ -358,7 +342,7 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) if (ehci_data.cap_regs->hcsparams_bm.port_power_control) { // mask out all change bits since they are Write 1 to clear uint32_t portsc = (regs->portsc & ~EHCI_PORTSC_MASK_W1C); - portsc |= ECHI_PORTSC_MASK_PORT_POWER; + portsc |= EHCI_PORTSC_MASK_PORT_POWER; regs->portsc = portsc; } @@ -455,20 +439,17 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - ehci_qhd_t* qhd; + ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); ehci_qtd_t* qtd; if (epnum == 0) { - qhd = qhd_control(dev_addr); qtd = qtd_control(dev_addr); - qtd_init(qtd, buffer, buflen); // first data toggle is always 1 (data & setup stage) qtd->data_toggle = 1; qtd->pid = dir ? EHCI_PID_IN : EHCI_PID_OUT; } else { - qhd = qhd_get_from_addr(dev_addr, ep_addr); qtd = qtd_find_free(); TU_ASSERT(qtd); @@ -491,20 +472,34 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) rhport; - (void) dev_addr; - (void) ep_addr; - return false; + // TODO ISO not supported yet + ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + TU_VERIFY(qtd != NULL); // no queued transfer + + hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); + TU_VERIFY(qtd->active); // transfer is already complete + + // HC is still processing, disable HC list schedule before making changes + bool const is_period = (qhd->interval_ms > 0); + + ehci_disable_schedule(ehci_data.regs, is_period); + + // check active bit again just in case HC has just processed the TD + bool const still_active = qtd->active; + if (still_active) { + // remove TD from QH overlay + qhd->qtd_overlay.next.terminate = 1; + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + + // remove TD from QH software list + qhd_remove_qtd(qhd); + } -// uint8_t const epnum = tu_edpt_number(ep_addr); -// ehci_qhd_t* qhd; -// -// // TODO ISO not supported -// if (epnum == 0) { -// qhd = qhd_control(dev_addr); -// }else { -// qhd = qhd_get_from_addr(dev_addr, ep_addr); -// } + ehci_enable_schedule(ehci_data.regs, is_period); + + return still_active; // true if removed an active transfer } bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) @@ -554,8 +549,12 @@ void port_connect_status_change_isr(uint8_t rhport) TU_ATTR_ALWAYS_INLINE static inline void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { // examine TD attached to queue head - ehci_qtd_t * volatile qtd = (ehci_qtd_t * volatile) qhd->attached_qtd; - if (qtd == NULL) return; // no TD attached + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + + if (qtd == NULL) { + return; // no TD attached + } + hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); // TD is still active, no need to process @@ -572,9 +571,7 @@ void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { } // remove and free TD before invoking callback - qhd->attached_qtd = NULL; - qhd->attached_buffer = 0; - qtd->used = 0; // free QTD + qhd_remove_qtd(qhd); // notify usbh uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); @@ -677,9 +674,7 @@ void qhd_xfer_error_isr(ehci_qhd_t * qhd) } // remove and free TD before invoking callback - qhd->attached_qtd = NULL; - qhd->attached_buffer = 0; - qtd->used = 0; // free QTD + qhd_remove_qtd(qhd); if (0 == qhd->ep_number ) { // control cannot be halted @@ -822,18 +817,55 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhpo return qhd_control(0); // control qhd of dev0 is used as async head } -// insert at head -static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next(ehci_link_t const *p_link) { + return (ehci_link_t*) tu_align32(p_link->address); +} + +TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) { new->address = current->address; current->address = ((uint32_t) new) | (new_type << 1); } -static inline ehci_link_t* list_next(ehci_link_t const *p_link) -{ - return (ehci_link_t*) tu_align32(p_link->address); +// Remove all queue head belong to this device address +static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { + ehci_link_t* prev = list_head; + + while (prev && !prev->terminate) { + ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); + + // done if loop back to head + if ( (uintptr_t) qhd == (uintptr_t) list_head) { + break; + } + + if ( qhd->dev_addr == dev_addr ) { + // TODO deactivate all TD, wait for QHD to inactive before removal + prev->address = qhd->next.address; + + // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) + qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); + + if ( qhd->int_smask ) + { + // period list queue element is guarantee to be free in the next frame (1 ms) + qhd->used = 0; + }else + { + // async list use async advance handshake + // mark as removing, will completely re-usable when async advance isr occurs + qhd->removing = 1; + } + + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); + }else { + prev = list_next(prev); + } + } } + //--------------------------------------------------------------------+ // Queue Header helper //--------------------------------------------------------------------+ @@ -856,8 +888,12 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_next(ehci_qhd_t const *p_qhd return (ehci_qhd_t *) tu_align32(p_qhd->next.address); } -// Get queue head from address +// Get queue head from device + endpoint address static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { + if ( 0 == tu_edpt_number(ep_addr) ) { + return qhd_control(dev_addr); + } + ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; for ( uint32_t i = 0; i < QHD_MAX; i++ ) { @@ -957,6 +993,16 @@ static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd) { hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); } +// Remove an attached TD from queue head +static void qhd_remove_qtd(ehci_qhd_t *qhd) { + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + + qhd->attached_qtd = NULL; + qhd->attached_buffer = 0; + + qtd->used = 0; // free QTD +} + //--------------------------------------------------------------------+ // Queue TD helper //--------------------------------------------------------------------+ diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index 8338fb419..05de80539 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -289,12 +289,17 @@ enum { }; enum { - EHCI_USBCMD_POS_RUN_STOP = 0, - EHCI_USBCMD_POS_FRAMELIST_SIZE = 2, - EHCI_USBCMD_POS_PERIOD_ENABLE = 4, - EHCI_USBCMD_POS_ASYNC_ENABLE = 5, - EHCI_USBCMD_POS_NXP_FRAMELIST_SIZE_MSB = 15, - EHCI_USBCMD_POS_INTERRUPT_THRESHOLD = 16 + EHCI_USBCMD_FRAMELIST_SIZE_SHIFT = 2, // [2..3] + EHCI_USBCMD_CHIPIDEA_FRAMELIST_SIZE_MSB_SHIFT = 15, + EHCI_USBCMD_INTERRUPT_THRESHOLD_SHIFT = 16 +}; + +enum { + EHCI_USBCMD_RUN_STOP = TU_BIT(0), // [0..0] 1 = Run, 0 = Stop + EHCI_USBCMD_HCRESET = TU_BIT(1), // [1..1] SW write 1 to reset HC, clear by HC when complete + EHCI_USBCMD_PERIOD_SCHEDULE_ENABLE = TU_BIT(4), // [4..4] Enable periodic schedule + EHCI_USBCMD_ASYNC_SCHEDULE_ENABLE = TU_BIT(5), // [5..5] Enable async schedule + EHCI_USBCMD_INTR_ON_ASYNC_ADVANCE_DOORBELL = TU_BIT(6), // [6..6] Tell HC to interrupt next time it advances async list. Clear by HC }; enum { @@ -306,7 +311,7 @@ enum { EHCI_PORTSC_MASK_FORCE_RESUME = TU_BIT(6), EHCI_PORTSC_MASK_PORT_SUSPEND = TU_BIT(7), EHCI_PORTSC_MASK_PORT_RESET = TU_BIT(8), - ECHI_PORTSC_MASK_PORT_POWER = TU_BIT(12), + EHCI_PORTSC_MASK_PORT_POWER = TU_BIT(12), EHCI_PORTSC_MASK_W1C = EHCI_PORTSC_MASK_CONNECT_STATUS_CHANGE | -- cgit v1.3.1 From d2542560470de242dd8988d0b3c10d7df0496bb0 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 17:54:24 +0700 Subject: change dcache clean/invalidate return type to bool add tu_assert() check for aligned 32byte address for imxrt --- src/common/tusb_common.h | 13 +++++++------ src/host/hcd.h | 8 ++++---- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 15 +++++++++------ src/portable/chipidea/ci_hs/hcd_ci_hs.c | 12 ++++++------ src/portable/ehci/ehci.c | 9 ++++++--- 5 files changed, 32 insertions(+), 25 deletions(-) (limited to 'src/host') diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 957491aa9..bae583c06 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -99,10 +99,9 @@ TU_ATTR_WEAK extern void* tusb_app_phys_to_virt(void *phys_addr); #define tu_varclr(_var) tu_memclr(_var, sizeof(*(_var))) // This is a backport of memset_s from c11 -TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, int ch, size_t count) -{ +TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, int ch, size_t count) { // TODO may check if desst and src is not NULL - if (count > destsz) { + if ( count > destsz ) { return -1; } memset(dest, ch, count); @@ -110,10 +109,9 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i } // This is a backport of memcpy_s from c11 -TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void * src, size_t count ) -{ +TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void *src, size_t count) { // TODO may check if desst and src is not NULL - if (count > destsz) { + if ( count > destsz ) { return -1; } memcpy(dest, src, count); @@ -169,6 +167,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align32 (uint32_t value) { retur TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align4k (uint32_t value) { return (value & 0xFFFFF000UL); } TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_offset4k(uint32_t value) { return (value & 0xFFFUL); } +TU_ATTR_ALWAYS_INLINE static inline bool tu_is_aligned32(uint32_t value) { return (value & 0x1FUL) == 0; } +TU_ATTR_ALWAYS_INLINE static inline bool tu_is_aligned64(uint64_t value) { return (value & 0x3FUL) == 0; } + //------------- Mathematics -------------// TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_div_ceil(uint32_t v, uint32_t d) { return (v + d -1)/d; } diff --git a/src/host/hcd.h b/src/host/hcd.h index 3355c18b2..52fcc834e 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -104,21 +104,21 @@ typedef struct uint8_t speed; } hcd_devtree_info_t; -//--------------------------------------------------------------------+ +//-------------------------------------------------------------- // Memory API //--------------------------------------------------------------------+ // clean/flush data cache: write cache -> memory. // Required before an DMA TX transfer to make sure data is in memory -void hcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK; // invalidate data cache: mark cache as invalid, next read will read from memory // Required BOTH before and after an DMA RX transfer -void hcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; // clean and invalidate data cache // Required before an DMA transfer where memory is both read/write by DMA -void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; //--------------------------------------------------------------------+ // Controller API diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index 96f0ba766..c59c107ff 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -68,31 +68,34 @@ TU_ATTR_ALWAYS_INLINE static inline bool imxrt_is_cache_mem(uintptr_t addr) { return !(0x20000000 <= addr && addr < 0x20100000); } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); SCB_CleanDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); } + return true; } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { // Invalidating does not push cached changes back to RAM so we need to be // *very* careful when we do it. If we're not aligned, then we risk resetting // values back to their RAM state. - // if (addr32 % 32 != 0) { - // TU_BREAKPOINT(); - // } + TU_ASSERT(tu_is_aligned32(addr32)); SCB_InvalidateDCache_by_Addr((void*) addr32, (int32_t) data_size); } + return true; } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); SCB_CleanInvalidateDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); } + return true; } #endif diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 56167b8f6..6ee91e18e 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -41,16 +41,16 @@ #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX #include "ci_hs_imxrt.h" - void hcd_dcache_clean(void const* addr, uint32_t data_size) { - imxrt_dcache_clean(addr, data_size); + bool hcd_dcache_clean(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean(addr, data_size); } - void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_invalidate(addr, data_size); + bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_invalidate(addr, data_size); } - void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_clean_invalidate(addr, data_size); + bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean_invalidate(addr, data_size); } #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 38711e382..6dfaab2a2 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -162,16 +162,19 @@ static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); static inline ehci_link_t* list_next (ehci_link_t const *p_link); -TU_ATTR_WEAK void hcd_dcache_clean(void const* addr, uint32_t data_size) { +TU_ATTR_WEAK bool hcd_dcache_clean(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; + return true; } -TU_ATTR_WEAK void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_WEAK bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; + return true; } -TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_WEAK bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; + return true; } //--------------------------------------------------------------------+ -- cgit v1.3.1 From fd29fd923a0a64be96fe4bdfa2a5fa9f184ea6c7 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 20:53:44 +0700 Subject: clean up --- src/host/hcd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/host') diff --git a/src/host/hcd.h b/src/host/hcd.h index 52fcc834e..a98286053 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -104,7 +104,7 @@ typedef struct uint8_t speed; } hcd_devtree_info_t; -//-------------------------------------------------------------- +//--------------------------------------------------------------------+ // Memory API //--------------------------------------------------------------------+ -- cgit v1.3.1 From dc74e634f93962512229ba7d4e14467c16125c0d Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Jul 2023 12:35:40 +0700 Subject: fix unaligned hub status_change --- src/host/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/host') diff --git a/src/host/hub.c b/src/host/hub.c index 182bd6ce8..16dd534d2 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -45,8 +45,8 @@ typedef struct uint8_t itf_num; uint8_t ep_in; uint8_t port_count; - uint8_t status_change; // data from status change interrupt endpoint + CFG_TUH_MEM_ALIGN uint8_t status_change; CFG_TUH_MEM_ALIGN hub_port_status_response_t port_status; CFG_TUH_MEM_ALIGN hub_status_response_t hub_status; } hub_interface_t; -- cgit v1.3.1 From c37a9571741cef0dcf0cd5a77e202ae741a2dd42 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Jul 2023 19:56:48 +0700 Subject: correct hcd_edpt_clear_stall() API signature --- src/host/hcd.h | 2 +- src/portable/mentor/musb/hcd_musb.c | 4 ++-- src/portable/nxp/khci/hcd_khci.c | 4 ++-- src/portable/ohci/ohci.c | 4 ++-- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 4 ++-- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 4 ++-- src/portable/renesas/rusb2/hcd_rusb2.c | 4 ++-- 7 files changed, 13 insertions(+), 13 deletions(-) (limited to 'src/host') diff --git a/src/host/hcd.h b/src/host/hcd.h index 50f1dcdcc..898e0c6a4 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -179,7 +179,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr); +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); //--------------------------------------------------------------------+ // USBH implemented API diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 5be67a186..5d1fba6d9 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -831,8 +831,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { } // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; unsigned const pipenum = find_pipe(dev_addr, ep_addr); if (!pipenum) return false; hw_endpoint_t volatile *regs = edpt_regs(pipenum - 1); diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 6784049c5..928564e26 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -570,8 +570,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return false; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; if (!tu_edpt_number(ep_addr)) return true; int num = find_pipe(dev_addr, ep_addr); if (num < 0) return false; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 9f3af4781..413e72037 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -556,8 +556,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return false; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; ohci_ed_t * const p_ed = ed_from_addr(dev_addr, ep_addr); p_ed->is_stalled = 0; diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index bb41ad638..45a3e80ef 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -163,8 +163,8 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet // return busy; //} -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; (void) dev_addr; (void) ep_addr; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 5091fa907..6db8e2a0a 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -625,8 +625,8 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet return true; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; (void) dev_addr; (void) ep_addr; diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 0a75d0b47..292d40da8 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -718,8 +718,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return false; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; uint16_t volatile *ctr = addr_to_pipectr(dev_addr, ep_addr); TU_ASSERT(ctr); -- cgit v1.3.1 From 10575c1b380136ce9381393c33e982cea7ef4731 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Jul 2023 20:48:18 +0700 Subject: mising ehci --- src/host/hcd.h | 2 +- src/portable/ehci/ehci.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'src/host') diff --git a/src/host/hcd.h b/src/host/hcd.h index 898e0c6a4..d77dd6e2f 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -179,7 +179,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); //--------------------------------------------------------------------+ // USBH implemented API diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 241393a39..979069cfa 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -502,8 +502,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return still_active; // true if removed an active transfer } -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; ehci_qhd_t *qhd = qhd_get_from_addr(daddr, ep_addr); qhd->qtd_overlay.halted = 0; hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); -- cgit v1.3.1