From 5ade91780578bca10bae048a58fed4b788b553d1 Mon Sep 17 00:00:00 2001 From: Michiel van Leeuwen Date: Fri, 28 Apr 2023 11:26:26 +0200 Subject: dwc2: configure fifo size to be twice the max_size This is needed in order to always be able to fit a packet in the fifo. Writing to the fifo is done from an interrupts that fires when the fifo is half-empty, so the fifo must be twice the packet size. --- src/portable/synopsys/dwc2/dcd_dwc2.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index c6132a1f5..bcd584953 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -534,6 +534,9 @@ void dcd_init (uint8_t rhport) int_mask = dwc2->gotgint; dwc2->gotgint |= int_mask; + // Configure TX FIFO to set the TX FIFO empty interrupt when half-empty + dwc2->gahbcfg &= ~GAHBCFG_TXFELVL; + // Required as part of core initialization. // TODO: How should mode mismatch be handled? It will cause // the core to stop working/require reset. @@ -645,7 +648,10 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) xfer->max_size = tu_edpt_packet_size(desc_edpt); xfer->interval = desc_edpt->bInterval; - uint16_t const fifo_size = tu_div_ceil(xfer->max_size, 4); + // The fifo-empty interrupt fires when the interrupt is half empty. In order + // to be able to write a packet at that point, the fifo must be twice the + // max_size. + uint16_t const fifo_size = tu_div_ceil(xfer->max_size * 2, 4); if(dir == TUSB_DIR_OUT) { -- cgit v1.3.1 From 678edbe20320fe4d17437a9175ec8ff88f752ecb Mon Sep 17 00:00:00 2001 From: Michiel van Leeuwen Date: Fri, 28 Apr 2023 11:39:39 +0200 Subject: Check correct interrupt flag Fixes #1737 --- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index bcd584953..d84014789 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1322,7 +1322,7 @@ void dcd_int_handler(uint8_t rhport) do { handle_rxflvl_irq(rhport); - } while(dwc2->gotgint & GINTSTS_RXFLVL); + } while(dwc2->gintsts & GINTSTS_RXFLVL); // Manage RX FIFO size if (_out_ep_closed) -- cgit v1.3.1 From 75cf8e21a7e525eb24b7fd34fe5859cba331fcc2 Mon Sep 17 00:00:00 2001 From: Michiel van Leeuwen Date: Thu, 4 May 2023 10:02:42 +0200 Subject: Use double-sized fifo only for IN endpoints --- src/portable/synopsys/dwc2/dcd_dwc2.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index d84014789..c3d3ae085 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -648,10 +648,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) xfer->max_size = tu_edpt_packet_size(desc_edpt); xfer->interval = desc_edpt->bInterval; - // The fifo-empty interrupt fires when the interrupt is half empty. In order - // to be able to write a packet at that point, the fifo must be twice the - // max_size. - uint16_t const fifo_size = tu_div_ceil(xfer->max_size * 2, 4); + uint16_t fifo_size = tu_div_ceil(xfer->max_size, 4); if(dir == TUSB_DIR_OUT) { @@ -697,6 +694,11 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) // In FIFO is allocated by following rules: // - IN EP 1 gets FIFO 1, IN EP "n" gets FIFO "n". + // The fifo-empty interrupt fires when the interrupt is half empty. In order + // to be able to write a packet at that point, the fifo must be twice the + // max_size. + fifo_size = fifo_size * 2; + // Check if free space is available TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size/4); -- cgit v1.3.1 From d0bff6fd3ec9fc133032dea84732451d93d202b4 Mon Sep 17 00:00:00 2001 From: Xelus22 Date: Tue, 25 Jul 2023 23:53:55 +1000 Subject: initial add SOF supporpt to CH32V307 USB HS --- src/portable/wch/ch32v307/dcd_usbhs.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/wch/ch32v307/dcd_usbhs.c b/src/portable/wch/ch32v307/dcd_usbhs.c index 3ad011cff..843643ef7 100644 --- a/src/portable/wch/ch32v307/dcd_usbhs.c +++ b/src/portable/wch/ch32v307/dcd_usbhs.c @@ -135,6 +135,19 @@ void dcd_remote_wakeup(uint8_t rhport) (void) rhport; } +void dcd_sof_enable(uint8_t rhport, bool en) +{ + (void) rhport; + if (en) + { + USBHSD->INT_EN |= USBHS_SOF_ACT_EN; + } + else + { + USBHSD->INT_EN &= ~(USBHS_SOF_ACT_EN); + } +} + void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { (void)rhport; @@ -332,7 +345,9 @@ void dcd_int_handler(uint8_t rhport) { xfer_ctl_t *xfer = XFER_CTL_BASE(end_num, tu_edpt_dir(endp)); - if (rx_token == PID_OUT) { + if (rx_token == PID_SOF) { + dcd_event_sof(rhport, USBHSD->FRAME_NO, true); + } else if (rx_token == PID_OUT) { uint16_t rx_len = USBHSD->RX_LEN; receive_packet(xfer, rx_len); -- cgit v1.3.1 From 1755bba509edf2d5bc49cadecb6e956497732b37 Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Mon, 15 Jan 2024 12:47:13 +0000 Subject: Add DWC2 Test Mode SUpport --- src/common/tusb_mcu.h | 2 ++ src/device/dcd.h | 28 ++++++++++++++++++ src/device/usbd.c | 53 +++++++++++++++++++++++++++++++---- src/portable/synopsys/dwc2/dcd_dwc2.c | 30 ++++++++++++++++++++ 4 files changed, 107 insertions(+), 6 deletions(-) (limited to 'src/portable') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 35f94efbc..146accabf 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -195,6 +195,7 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F7) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 + #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT // FS has 6, HS has 9 #define TUP_DCD_ENDPOINT_MAX 9 @@ -262,6 +263,7 @@ #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT #elif TU_CHECK_MCU(OPT_MCU_STM32L5) #define TUP_USBIP_FSDEV diff --git a/src/device/dcd.h b/src/device/dcd.h index 18a708347..7755ef107 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -58,6 +58,7 @@ typedef enum DCD_EVENT_SETUP_RECEIVED, DCD_EVENT_XFER_COMPLETE, + DCD_EVENT_TEST_MODE, // Not an DCD event, just a convenient way to defer ISR function USBD_EVENT_FUNC_CALL, @@ -97,9 +98,23 @@ typedef struct TU_ATTR_ALIGNED(4) void (*func) (void*); void* param; }func_call; + + // TEST MODE + struct { + uint8_t selector; + }test_mode; }; } dcd_event_t; +typedef enum _test_mode_selector +{ + TEST_J = 1, + TEST_K, + TEST_SE0_NAK, + TEST_PACKET, + TEST_FORCE_ENABLE, +} test_mode_t; + //TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct"); //--------------------------------------------------------------------+ @@ -149,6 +164,12 @@ void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; // Enable/Disable Start-of-frame interrupt. Default is disabled void dcd_sof_enable(uint8_t rhport, bool en); +// Check if the test mode is supported +bool dcd_test_mode_supported(test_mode_t test_selector) TU_ATTR_WEAK; + +// Put device into a test mode (needs power cycle to quit) +void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) TU_ATTR_WEAK; + //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ @@ -240,6 +261,13 @@ static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_i dcd_event_handler(&event, in_isr); } +TU_ATTR_ALWAYS_INLINE static inline void dcd_event_enter_test_mode(uint8_t rhport, uint8_t test_selector, bool in_isr) +{ + dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_TEST_MODE }; + event.test_mode.selector = test_selector; + dcd_event_handler(&event, in_isr); +} + #ifdef __cplusplus } #endif diff --git a/src/device/usbd.c b/src/device/usbd.c index f0d9fba52..90fde92b5 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -587,6 +587,11 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) if ( event.func_call.func ) event.func_call.func(event.func_call.param); break; + case DCD_EVENT_TEST_MODE: + TU_LOG_USBD(": Enter Test Mode with selector index = %d)\r\n", event.test_mode.selector); + if (dcd_enter_test_mode) dcd_enter_test_mode(event.rhport, event.test_mode.selector); + break; + case DCD_EVENT_SOF: default: TU_BREAKPOINT(); @@ -725,14 +730,50 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; case TUSB_REQ_SET_FEATURE: - // Only support remote wakeup for device feature - TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue); + // Handle the feature selector + switch(p_request->wValue) + { + // Support for remote wakeup + case TUSB_REQ_FEATURE_REMOTE_WAKEUP: + TU_LOG_USBD(" Enable Remote Wakeup\r\n"); - TU_LOG_USBD(" Enable Remote Wakeup\r\n"); + // Host may enable remote wake up before suspending especially HID device + _usbd_dev.remote_wakeup_en = true; + tud_control_status(rhport, p_request); - // Host may enable remote wake up before suspending especially HID device - _usbd_dev.remote_wakeup_en = true; - tud_control_status(rhport, p_request); + break; + + // Support for TEST_MODE + case TUSB_REQ_FEATURE_TEST_MODE: + // Only handle the test mode is supported and valid + if (!dcd_enter_test_mode || !dcd_test_mode_supported || 0 != tu_u16_low(p_request->wIndex)) + { + return false; + } + + uint8_t selector = tu_u16_high(p_request->wIndex); + + // Stall request if the selected test mode isn't supported + if (!dcd_test_mode_supported(selector)) + { + TU_LOG_USBD(" Unsupported Test Mode (test selector index: %d)\r\n", selector); + + return false; + } + + TU_LOG_USBD(" Schedule Test Mode (test selector index: %d)\r\n", selector); + + // Acknowledge request + tud_control_status(rhport, p_request); + + // Schedule the execution of the test mode so that the request can be answered + dcd_event_enter_test_mode(rhport, selector, false); + + break; + + // Stall unsupported feature selector + default: return false; + } break; case TUSB_REQ_CLEAR_FEATURE: diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index c6132a1f5..ee4b2b28d 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1351,4 +1351,34 @@ void dcd_int_handler(uint8_t rhport) // } } +#if defined(TUP_USBIP_DWC2_TEST_MODE_SUPPORT) + +bool dcd_test_mode_supported(test_mode_t test_selector) { + // Check if test mode selector is unsupported + if (TEST_FORCE_ENABLE < test_selector || TEST_J > test_selector) { + return false; + } + + return true; +} + +void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { + // Disable test mode if not supported + if (!dcd_test_mode_supported(test_selector)) { + test_selector = 0; + } + + // Delay the entering a bit so there is enough time to acknowledge request + uint32_t count = SystemCoreClock / 20000; + while (count--) __NOP(); + + // Get port address... + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // Enable the test mode + dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (test_selector << DCTL_TCTL_Pos); +} + +#endif /* TUP_USBIP_DWC2_TEST_MODE_SUPPORT */ + #endif -- cgit v1.3.1 From c3e96e667f45e695bc855db4011f1a7f46d24b29 Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Mon, 15 Jan 2024 15:10:46 +0000 Subject: Change to control complete cb --- src/device/dcd.h | 19 +++---------------- src/device/usbd.c | 34 ++++++++++++++++++---------------- src/portable/synopsys/dwc2/dcd_dwc2.c | 11 +++-------- 3 files changed, 24 insertions(+), 40 deletions(-) (limited to 'src/portable') diff --git a/src/device/dcd.h b/src/device/dcd.h index 7755ef107..2248cd392 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -58,7 +58,6 @@ typedef enum DCD_EVENT_SETUP_RECEIVED, DCD_EVENT_XFER_COMPLETE, - DCD_EVENT_TEST_MODE, // Not an DCD event, just a convenient way to defer ISR function USBD_EVENT_FUNC_CALL, @@ -71,7 +70,7 @@ typedef struct TU_ATTR_ALIGNED(4) uint8_t rhport; uint8_t event_id; - union + union { // BUS RESET struct { @@ -98,11 +97,6 @@ typedef struct TU_ATTR_ALIGNED(4) void (*func) (void*); void* param; }func_call; - - // TEST MODE - struct { - uint8_t selector; - }test_mode; }; } dcd_event_t; @@ -164,8 +158,8 @@ void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; // Enable/Disable Start-of-frame interrupt. Default is disabled void dcd_sof_enable(uint8_t rhport, bool en); -// Check if the test mode is supported -bool dcd_test_mode_supported(test_mode_t test_selector) TU_ATTR_WEAK; +// Check if the test mode is supported, returns true is test mode selector is supported +bool dcd_check_test_mode_support(test_mode_t test_selector) TU_ATTR_WEAK; // Put device into a test mode (needs power cycle to quit) void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) TU_ATTR_WEAK; @@ -261,13 +255,6 @@ static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_i dcd_event_handler(&event, in_isr); } -TU_ATTR_ALWAYS_INLINE static inline void dcd_event_enter_test_mode(uint8_t rhport, uint8_t test_selector, bool in_isr) -{ - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_TEST_MODE }; - event.test_mode.selector = test_selector; - dcd_event_handler(&event, in_isr); -} - #ifdef __cplusplus } #endif diff --git a/src/device/usbd.c b/src/device/usbd.c index 90fde92b5..fbdba4d2f 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -285,6 +285,7 @@ tu_static osal_queue_t _usbd_q; static bool process_control_request(uint8_t rhport, tusb_control_request_t const * p_request); static bool process_set_config(uint8_t rhport, uint8_t cfg_num); static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const * p_request); +static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); // from usbd_control.c void usbd_control_reset(void); @@ -587,11 +588,6 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) if ( event.func_call.func ) event.func_call.func(event.func_call.param); break; - case DCD_EVENT_TEST_MODE: - TU_LOG_USBD(": Enter Test Mode with selector index = %d)\r\n", event.test_mode.selector); - if (dcd_enter_test_mode) dcd_enter_test_mode(event.rhport, event.test_mode.selector); - break; - case DCD_EVENT_SOF: default: TU_BREAKPOINT(); @@ -740,35 +736,29 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const // Host may enable remote wake up before suspending especially HID device _usbd_dev.remote_wakeup_en = true; tud_control_status(rhport, p_request); - break; // Support for TEST_MODE case TUSB_REQ_FEATURE_TEST_MODE: - // Only handle the test mode is supported and valid - if (!dcd_enter_test_mode || !dcd_test_mode_supported || 0 != tu_u16_low(p_request->wIndex)) - { - return false; - } + // Only handle the test mode if supported and valid + TU_VERIFY(dcd_enter_test_mode && dcd_check_test_mode_support && 0 == tu_u16_low(p_request->wIndex)); uint8_t selector = tu_u16_high(p_request->wIndex); // Stall request if the selected test mode isn't supported - if (!dcd_test_mode_supported(selector)) + if (!dcd_check_test_mode_support(selector)) { TU_LOG_USBD(" Unsupported Test Mode (test selector index: %d)\r\n", selector); return false; } - TU_LOG_USBD(" Schedule Test Mode (test selector index: %d)\r\n", selector); - // Acknowledge request tud_control_status(rhport, p_request); - // Schedule the execution of the test mode so that the request can be answered - dcd_event_enter_test_mode(rhport, selector, false); + TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); + usbd_control_set_complete_callback(process_test_mode_cb); break; // Stall unsupported feature selector @@ -1115,6 +1105,18 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } } +bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) +{ + // At this point it should already be ensured that dcd_enter_test_mode() is defined + + // Only enter the test mode after the request for it has completed + TU_VERIFY(CONTROL_STAGE_ACK == stage); + + dcd_enter_test_mode(rhport, tu_u16_high(request->wIndex)); + + return true; +} + //--------------------------------------------------------------------+ // DCD Event Handler //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index ee4b2b28d..aa4a8bfb2 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1353,7 +1353,7 @@ void dcd_int_handler(uint8_t rhport) #if defined(TUP_USBIP_DWC2_TEST_MODE_SUPPORT) -bool dcd_test_mode_supported(test_mode_t test_selector) { +bool dcd_check_test_mode_support(test_mode_t test_selector) { // Check if test mode selector is unsupported if (TEST_FORCE_ENABLE < test_selector || TEST_J > test_selector) { return false; @@ -1363,15 +1363,10 @@ bool dcd_test_mode_supported(test_mode_t test_selector) { } void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { - // Disable test mode if not supported - if (!dcd_test_mode_supported(test_selector)) { + // Disable test mode if not supported as a fall back + if (!dcd_check_test_mode_support(test_selector)) { test_selector = 0; } - - // Delay the entering a bit so there is enough time to acknowledge request - uint32_t count = SystemCoreClock / 20000; - while (count--) __NOP(); - // Get port address... dwc2_regs_t* dwc2 = DWC2_REG(rhport); -- cgit v1.3.1 From d0373f4749e320c7cb3fac9cce068b4398e60f2f Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Mon, 19 Feb 2024 17:44:18 +0000 Subject: Opt-out for USB Test-Mode --- src/device/usbd.c | 4 ++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 4 ++-- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/device/usbd.c b/src/device/usbd.c index 83217a869..1da6f0b53 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -731,6 +731,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const tud_control_status(rhport, p_request); break; + #if !defined(TUSB_NO_TEST_MODE_SUPPORT) // Support for TEST_MODE case TUSB_REQ_FEATURE_TEST_MODE: // Only handle the test mode if supported and valid @@ -753,6 +754,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const usbd_control_set_complete_callback(process_test_mode_cb); break; + #endif /* !TUSB_NO_TEST_MODE_SUPPORT */ // Stall unsupported feature selector default: return false; @@ -1098,6 +1100,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } } +#if !defined(TUSB_NO_TEST_MODE_SUPPORT) static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) { // At this point it should already be ensured that dcd_enter_test_mode() is defined @@ -1109,6 +1112,7 @@ static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_req return true; } +#endif /* !TUSB_NO_TEST_MODE_SUPPORT */ //--------------------------------------------------------------------+ // DCD Event Handler diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 381aeca71..8163ba8e1 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1186,7 +1186,7 @@ void dcd_int_handler(uint8_t rhport) { // } } -#if defined(TUP_USBIP_DWC2_TEST_MODE_SUPPORT) +#if defined(TUP_USBIP_DWC2_TEST_MODE_SUPPORT) && !defined(TUSB_NO_TEST_MODE_SUPPORT) bool dcd_check_test_mode_support(test_mode_t test_selector) { // Check if test mode selector is unsupported @@ -1209,6 +1209,6 @@ void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (test_selector << DCTL_TCTL_Pos); } -#endif /* TUP_USBIP_DWC2_TEST_MODE_SUPPORT */ +#endif /* TUP_USBIP_DWC2_TEST_MODE_SUPPORT && !TUSB_NO_TEST_MODE_SUPPORT */ #endif -- cgit v1.3.1 From 00db4227451b223c939f7a84e93199a73519d04a Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 5 Apr 2024 13:12:24 +0200 Subject: Cleanup ep/pma free, ISO ep should use alloc/activate. --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 99 +++------------------------ 1 file changed, 8 insertions(+), 91 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 7bf726f3f..41b5acbc6 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -183,12 +183,9 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix); static void dcd_ep_ctr_handler(void); // PMA allocation/access -static uint8_t open_ep_count; static uint16_t ep_buf_ptr; ///< Points to first free memory location static void dcd_pma_alloc_reset(void); static uint16_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length); -static void dcd_pma_free(uint8_t ep_addr); -static void dcd_ep_free(uint8_t ep_addr); static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes); static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes); @@ -765,7 +762,6 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * re static void dcd_pma_alloc_reset(void) { - open_ep_count = 0; ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8*MAX_EP_COUNT; // 8 bytes per endpoint (two TX and two RX words, each) //TU_LOG2("dcd_pma_alloc_reset()\r\n"); for(uint32_t i=0; i 2, /**/); - TU_ASSERT(xfer_ctl_ptr(ep_addr)->max_packet_size != 0, /**/); - open_ep_count--; - - // If count is 2, only EP0 should be open, so allocations can be mostly reset. - - if(open_ep_count == 2) - { - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8*MAX_EP_COUNT + 2*CFG_TUD_ENDPOINT0_SIZE; // 8 bytes per endpoint (two TX and two RX words, each), and EP0 - - // Skip EP0 - for(uint32_t i=1; ipma_alloc_size = 0U; - xfer_ctl_ptr(tu_edpt_addr(i,TUSB_DIR_IN))->pma_alloc_size = 0U; - xfer_ctl_ptr(tu_edpt_addr(i,TUSB_DIR_OUT))->pma_ptr = 0U; - xfer_ctl_ptr(tu_edpt_addr(i,TUSB_DIR_IN))->pma_ptr = 0U; - } - } -} - /*** * Allocate hardware endpoint */ @@ -892,34 +859,6 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) TU_ASSERT(0); } -/*** - * Free hardware endpoint - */ -static void dcd_ep_free(uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - - for(uint8_t i = 0; i < STFSDEV_EP_COUNT; i++) - { - // Check if EP number & dir are the same - if(ep_alloc_status[i].ep_num == epnum && - ep_alloc_status[i].allocated[dir] == dir) - { - ep_alloc_status[i].allocated[dir] = false; - // Reset entry if ISO endpoint or both direction are free - if(ep_alloc_status[i].ep_type == TUSB_XFER_ISOCHRONOUS || - !ep_alloc_status[i].allocated[dir ^ 1]) - { - ep_alloc_status[i].ep_num = 0xFF; - ep_alloc_status[i].ep_type = 0xFF; - - return; - } - } - } -} - // The STM32F0 doesn't seem to like |= or &= to manipulate the EP#R registers, // so I'm using the #define from HAL here, instead. @@ -934,16 +873,16 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc uint32_t wType; TU_ASSERT(ep_idx < STFSDEV_EP_COUNT); - TU_ASSERT(buffer_size <= 1024); + TU_ASSERT(buffer_size <= 64); + + // ISO endpoint should use alloc / active functions + TU_ASSERT(p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS); // Set type switch(p_endpoint_desc->bmAttributes.xfer) { case TUSB_XFER_CONTROL: wType = USB_EP_CONTROL; break; - case TUSB_XFER_ISOCHRONOUS: - wType = USB_EP_ISOCHRONOUS; - break; case TUSB_XFER_BULK: wType = USB_EP_CONTROL; break; @@ -958,45 +897,27 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc pcd_set_eptype(USB, ep_idx, wType); pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); - // Be normal, for now, instead of only accepting zero-byte packets (on control endpoint) - // or being double-buffered (bulk endpoints) - pcd_clear_ep_kind(USB,0); /* Create a packet memory buffer area. For isochronous endpoints, * use the same buffer as the double buffer, essentially disabling double buffering */ pma_addr = dcd_pma_alloc(p_endpoint_desc->bEndpointAddress, buffer_size); - if( (dir == TUSB_DIR_IN) || (wType == USB_EP_ISOCHRONOUS) ) + if(dir == TUSB_DIR_IN) { pcd_set_ep_tx_address(USB, ep_idx, pma_addr); pcd_set_ep_tx_bufsize(USB, ep_idx, buffer_size); + pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); pcd_clear_tx_dtog(USB, ep_idx); } - if( (dir == TUSB_DIR_OUT) || (wType == USB_EP_ISOCHRONOUS) ) + if(dir == TUSB_DIR_OUT) { pcd_set_ep_rx_address(USB, ep_idx, pma_addr); pcd_set_ep_rx_bufsize(USB, ep_idx, buffer_size); + pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); pcd_clear_rx_dtog(USB, ep_idx); } - /* Enable endpoint */ - if (dir == TUSB_DIR_IN) - { - if(wType == USB_EP_ISOCHRONOUS) { - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); - } else { - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); - } - } else - { - if(wType == USB_EP_ISOCHRONOUS) { - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); - } else { - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); - } - } - xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->max_packet_size = packet_size; xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->ep_idx = ep_idx; @@ -1032,10 +953,6 @@ void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) { pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); } - - dcd_ep_free(ep_addr); - - dcd_pma_free(ep_addr); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) -- cgit v1.3.1 From bf3e9b865302c90bc175e2ed28d64de9dc7bf8c9 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 9 Apr 2024 13:31:23 +0200 Subject: Refactor edpt_xfer(), support double buffering in dcd_pma_alloc(). --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 114 +++++++++----------------- 1 file changed, 37 insertions(+), 77 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 41b5acbc6..f380355ae 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -151,9 +151,7 @@ typedef struct tu_fifo_t * ff; uint16_t total_len; uint16_t queued_len; - uint16_t pma_ptr; uint16_t max_packet_size; - uint16_t pma_alloc_size; uint8_t ep_idx; // index for USB_EPnR register } xfer_ctl_t; @@ -180,12 +178,12 @@ static uint8_t remoteWakeCountdown; // When wake is requested // into the stack. static void dcd_handle_bus_reset(void); static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix); +static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr); static void dcd_ep_ctr_handler(void); // PMA allocation/access static uint16_t ep_buf_ptr; ///< Points to first free memory location -static void dcd_pma_alloc_reset(void); -static uint16_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length); +static uint32_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length, bool dbuf); static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes); static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes); @@ -491,7 +489,9 @@ static void dcd_handle_bus_reset(void) ep_alloc_status[i].allocated[1] = false; } - dcd_pma_alloc_reset(); + // Reset PMA allocation + ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8*MAX_EP_COUNT; + dcd_edpt_open (0, &ep0OUT_desc); dcd_edpt_open (0, &ep0IN_desc); @@ -760,40 +760,15 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * re } } -static void dcd_pma_alloc_reset(void) -{ - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8*MAX_EP_COUNT; // 8 bytes per endpoint (two TX and two RX words, each) - //TU_LOG2("dcd_pma_alloc_reset()\r\n"); - for(uint32_t i=0; ipma_alloc_size = 0U; - xfer_ctl_ptr(tu_edpt_addr(i,TUSB_DIR_IN))->pma_alloc_size = 0U; - xfer_ctl_ptr(tu_edpt_addr(i,TUSB_DIR_OUT))->pma_ptr = 0U; - xfer_ctl_ptr(tu_edpt_addr(i,TUSB_DIR_IN))->pma_ptr = 0U; - } -} - /*** * Allocate a section of PMA - * - * If the EP number has already been allocated, and the new allocation - * is larger than the old allocation, then this will fail with a TU_ASSERT. - * (This is done to simplify the code. More complicated algorithms could be used) - * + * In case of double buffering, high 16bit is the address of 2nd buffer * During failure, TU_ASSERT is used. If this happens, rework/reallocate memory manually. */ -static uint16_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length) +static uint32_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length, bool dbuf) { xfer_ctl_t* epXferCtl = xfer_ctl_ptr(ep_addr); - if(epXferCtl->pma_alloc_size != 0U) - { - //TU_LOG2("dcd_pma_alloc(%x,%x)=%x (cached)\r\n",ep_addr,length,epXferCtl->pma_ptr); - // Previously allocated - TU_ASSERT(length <= epXferCtl->pma_alloc_size, 0xFFFF); // Verify no larger than previous alloc - return epXferCtl->pma_ptr; - } - // Ensure allocated buffer is aligned #ifdef FSDEV_BUS_32BIT length = (length + 3) & ~0x03; @@ -801,15 +776,16 @@ static uint16_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length) length = (length + 1) & ~0x01; #endif - uint16_t addr = ep_buf_ptr; + uint32_t addr = ep_buf_ptr; ep_buf_ptr = (uint16_t)(ep_buf_ptr + length); // increment buffer pointer - // Verify no overflow - TU_ASSERT(ep_buf_ptr <= FSDEV_PMA_SIZE, 0xFFFF); + if(dbuf) { + addr |= ((uint32_t)ep_buf_ptr) << 16; + ep_buf_ptr = (uint16_t)(ep_buf_ptr + length); // increment buffer pointer + } - epXferCtl->pma_ptr = addr; - epXferCtl->pma_alloc_size = length; - //TU_LOG1("dcd_pma_alloc(%x,%x)=%x\r\n",ep_addr,length,addr); + // Verify packet buffer is not overflowed + TU_ASSERT(ep_buf_ptr <= FSDEV_PMA_SIZE, 0xFFFF); return addr; } @@ -898,9 +874,8 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc pcd_set_eptype(USB, ep_idx, wType); pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); - /* Create a packet memory buffer area. For isochronous endpoints, - * use the same buffer as the double buffer, essentially disabling double buffering */ - pma_addr = dcd_pma_alloc(p_endpoint_desc->bEndpointAddress, buffer_size); + /* Create a packet memory buffer area. */ + pma_addr = dcd_pma_alloc(p_endpoint_desc->bEndpointAddress, buffer_size, false); if(dir == TUSB_DIR_IN) { @@ -966,7 +941,7 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet /* Create a packet memory buffer area. For isochronous endpoints, * use the same buffer as the double buffer, essentially disabling double buffering */ - uint16_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size); + uint16_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size, false); xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; @@ -1036,7 +1011,7 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) xfer->queued_len = (uint16_t)(xfer->queued_len + len); /* Write into correct register when ISOCHRONOUS (double buffered) */ - if ( (ep_reg & USB_EP_DTOG_TX) && ( (ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) ) { + if ((ep_reg & USB_EP_DTOG_TX) && ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS)) { pcd_set_ep_rx_cnt(USB, ep_ix, len); } else { pcd_set_ep_tx_cnt(USB, ep_ix, len); @@ -1045,7 +1020,7 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) pcd_set_ep_tx_status(USB, ep_ix, USB_EP_TX_VALID); } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { (void) rhport; @@ -1053,26 +1028,18 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - xfer->buffer = buffer; - xfer->ff = NULL; - xfer->total_len = total_bytes; - xfer->queued_len = 0; - if ( dir == TUSB_DIR_OUT ) { // A setup token can occur immediately after an OUT STATUS packet so make sure we have a valid // buffer for the control endpoint. - if (ep_idx == 0 && buffer == NULL) + if (ep_idx == 0 && xfer->buffer == NULL) { - xfer->buffer = (uint8_t*)_setup_packet; + xfer->buffer = (uint8_t*)_setup_packet; } - if(total_bytes > xfer->max_packet_size) - { - pcd_set_ep_rx_bufsize(USB,ep_idx,xfer->max_packet_size); - } else { - pcd_set_ep_rx_bufsize(USB,ep_idx,total_bytes); - } + uint32_t bufsize = xfer->total_len > xfer->max_packet_size ? xfer->max_packet_size : xfer->total_len; + pcd_set_ep_rx_bufsize(USB, ep_idx, bufsize); + pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_VALID); } else // IN @@ -1082,34 +1049,27 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t return true; } -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { - (void) rhport; - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); - uint8_t const epnum = xfer->ep_idx; - uint8_t const dir = tu_edpt_dir(ep_addr); + xfer->buffer = buffer; + xfer->ff = NULL; + xfer->total_len = total_bytes; + xfer->queued_len = 0; + + return edpt_xfer(rhport, ep_addr); +} + +bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +{ + xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); xfer->buffer = NULL; xfer->ff = ff; xfer->total_len = total_bytes; xfer->queued_len = 0; - if ( dir == TUSB_DIR_OUT ) - { - if(total_bytes > xfer->max_packet_size) - { - pcd_set_ep_rx_bufsize(USB,epnum,xfer->max_packet_size); - } else { - pcd_set_ep_rx_bufsize(USB,epnum,total_bytes); - } - pcd_set_ep_rx_status(USB, epnum, USB_EP_RX_VALID); - } - else // IN - { - dcd_transmit_packet(xfer,epnum); - } - return true; + return edpt_xfer(rhport, ep_addr); } void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) -- cgit v1.3.1 From 41fb2b69f72207d069ebbce50a0457c4c5cdfb35 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 9 Apr 2024 16:20:18 +0200 Subject: Rework macro according to ST driver. --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h index 946ad2c7c..7992f34a1 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h @@ -298,6 +298,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USB #endif } +#define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt +#define pcd_get_ep_dbuf1_cnt pcd_get_ep_rx_cnt + /** * @brief Sets address in an endpoint register. * @param USBx USB peripheral instance register address. @@ -331,6 +334,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * #endif } +#define pcd_get_ep_dbuf0_address pcd_get_ep_tx_address +#define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address + TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { #ifdef FSDEV_BUS_32BIT (void) USBx; @@ -349,6 +355,9 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USB #endif } +#define pcd_set_ep_dbuf0_address pcd_set_ep_tx_address +#define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address + TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { #ifdef FSDEV_BUS_32BIT (void) USBx; @@ -359,7 +368,9 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, u #endif } -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { +#define pcd_set_ep_tx_dbuf0_cnt pcd_set_ep_tx_cnt + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_dbuf1_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { #ifdef FSDEV_BUS_32BIT (void) USBx; pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); @@ -395,14 +406,16 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_bufsize(USB_TypeDef * USBx, pcd_set_ep_blsize_num_blocks(USBx, rxtx_idx, blocksize, numblocks); } -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_bufsize(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_dbuf0_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { pcd_set_ep_bufsize(USBx, 2*bEpIdx, wCount); } -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_bufsize(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { pcd_set_ep_bufsize(USBx, 2*bEpIdx + 1, wCount); } +#define pcd_set_ep_rx_dbuf1_cnt pcd_set_ep_rx_cnt + /** * @brief sets the status for tx transfer (bits STAT_TX[1:0]). * @param USBx USB peripheral instance register address. -- cgit v1.3.1 From 973d29acd095662a3a5f1dfb8d57a3ad8092f89b Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 9 Apr 2024 16:24:54 +0200 Subject: Rework ISO double buffering. --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 115 ++++++++++++++------------ 1 file changed, 62 insertions(+), 53 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index f380355ae..4844c916d 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -586,26 +586,31 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { } else { + // Clear RX CTR interrupt flag + if(ep_addr != 0u) { + pcd_clear_rx_ep_ctr(USB, EPindex); + } + uint32_t count; + uint16_t addr; /* Read from correct register when ISOCHRONOUS (double buffered) */ - if ( (wEPRegVal & USB_EP_DTOG_RX) && ( (wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) ) { - count = pcd_get_ep_tx_cnt(USB, EPindex); + if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + if (wEPRegVal & USB_EP_DTOG_RX) { + count = pcd_get_ep_dbuf0_cnt(USB, EPindex); + addr = pcd_get_ep_dbuf0_address(USB, EPindex); + } else { + count = pcd_get_ep_dbuf1_cnt(USB, EPindex); + addr = pcd_get_ep_dbuf1_address(USB, EPindex); + } } else { count = pcd_get_ep_rx_cnt(USB, EPindex); + addr = pcd_get_ep_rx_address(USB, EPindex); } TU_ASSERT(count <= xfer->max_packet_size, /**/); - // Clear RX CTR interrupt flag - if(ep_addr != 0u) - { - pcd_clear_rx_ep_ctr(USB, EPindex); - } - if (count != 0U) { - uint16_t addr = pcd_get_ep_rx_address(USB, EPindex); - if (xfer->ff) { dcd_read_packet_memory_ff(xfer->ff, addr, count); @@ -627,16 +632,15 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { } else { - uint32_t remaining = (uint32_t)xfer->total_len - (uint32_t)xfer->queued_len; - if(remaining >= xfer->max_packet_size) { - pcd_set_ep_rx_bufsize(USB, EPindex,xfer->max_packet_size); - } else { - pcd_set_ep_rx_bufsize(USB, EPindex,remaining); - } - + /* Set endpoint active again for receiving more data. + * Note that isochronous endpoints stay active always */ if (!((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS)) { - /* Set endpoint active again for receiving more data. - * Note that isochronous endpoints stay active always */ + uint32_t remaining = (uint32_t)xfer->total_len - (uint32_t)xfer->queued_len; + if(remaining >= xfer->max_packet_size) { + pcd_set_ep_rx_cnt(USB, EPindex,xfer->max_packet_size); + } else { + pcd_set_ep_rx_cnt(USB, EPindex,remaining); + } pcd_set_ep_rx_status(USB, EPindex, USB_EP_RX_VALID); } } @@ -648,7 +652,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { if(ep_addr == 0u) { // Always be prepared for a status packet... - pcd_set_ep_rx_bufsize(USB, EPindex, CFG_TUD_ENDPOINT0_SIZE); + pcd_set_ep_rx_cnt(USB, EPindex, CFG_TUD_ENDPOINT0_SIZE); pcd_clear_rx_ep_ctr(USB, EPindex); } } @@ -838,7 +842,7 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) // The STM32F0 doesn't seem to like |= or &= to manipulate the EP#R registers, // so I'm using the #define from HAL here, instead. -bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) { (void)rhport; uint8_t const ep_idx = dcd_ep_alloc(p_endpoint_desc->bEndpointAddress, p_endpoint_desc->bmAttributes.xfer); @@ -880,7 +884,6 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc if(dir == TUSB_DIR_IN) { pcd_set_ep_tx_address(USB, ep_idx, pma_addr); - pcd_set_ep_tx_bufsize(USB, ep_idx, buffer_size); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); pcd_clear_tx_dtog(USB, ep_idx); } @@ -888,7 +891,6 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc if(dir == TUSB_DIR_OUT) { pcd_set_ep_rx_address(USB, ep_idx, pma_addr); - pcd_set_ep_rx_bufsize(USB, ep_idx, buffer_size); pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); pcd_clear_rx_dtog(USB, ep_idx); } @@ -912,7 +914,7 @@ void dcd_edpt_close_all (uint8_t rhport) * * This also clears transfers in progress, should there be any. */ -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { (void)rhport; @@ -939,16 +941,15 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet uint8_t const ep_idx = dcd_ep_alloc(ep_addr, TUSB_XFER_ISOCHRONOUS); const uint16_t buffer_size = pcd_aligned_buffer_size(largest_packet_size); - /* Create a packet memory buffer area. For isochronous endpoints, - * use the same buffer as the double buffer, essentially disabling double buffering */ - uint16_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size, false); + /* Create a packet memory buffer area. Enable double buffering */ + uint32_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size, true); xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); - pcd_set_ep_tx_address(USB, ep_idx, pma_addr); - pcd_set_ep_rx_address(USB, ep_idx, pma_addr); + pcd_set_ep_tx_address(USB, ep_idx, pma_addr & 0xFFFF); + pcd_set_ep_rx_address(USB, ep_idx, pma_addr >> 16); return true; } @@ -961,26 +962,20 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); const uint16_t buffer_size = pcd_aligned_buffer_size(packet_size); - /* Disable endpoint */ - if(dir == TUSB_DIR_IN) - { - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); - } - else - { - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); - } + pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); + pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); - // Be normal, for now, instead of only accepting zero-byte packets (on control endpoint) - // or being double-buffered (bulk endpoints) - pcd_clear_ep_kind(USB,0); - pcd_set_ep_tx_bufsize(USB, ep_idx, buffer_size); - pcd_set_ep_rx_bufsize(USB, ep_idx, buffer_size); pcd_clear_tx_dtog(USB, ep_idx); pcd_clear_rx_dtog(USB, ep_idx); + if(dir == TUSB_DIR_IN) { + pcd_rx_dtog(USB, ep_idx); + } else { + pcd_tx_dtog(USB, ep_idx); + } + xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->max_packet_size = packet_size; return true; @@ -998,7 +993,21 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) } uint16_t ep_reg = pcd_get_endpoint(USB, ep_ix); - uint16_t addr_ptr = pcd_get_ep_tx_address(USB, ep_ix); + uint16_t addr_ptr; + + + if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + if (ep_reg & USB_EP_DTOG_TX) { + addr_ptr = pcd_get_ep_dbuf1_address(USB, ep_ix); + pcd_set_ep_tx_dbuf1_cnt(USB, ep_ix, len); + } else { + addr_ptr = pcd_get_ep_dbuf0_address(USB, ep_ix); + pcd_set_ep_tx_dbuf0_cnt(USB, ep_ix, len); + } + } else { + addr_ptr = pcd_get_ep_tx_address(USB, ep_ix); + pcd_set_ep_tx_cnt(USB, ep_ix, len); + } if (xfer->ff) { @@ -1010,13 +1019,6 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) } xfer->queued_len = (uint16_t)(xfer->queued_len + len); - /* Write into correct register when ISOCHRONOUS (double buffered) */ - if ((ep_reg & USB_EP_DTOG_TX) && ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS)) { - pcd_set_ep_rx_cnt(USB, ep_ix, len); - } else { - pcd_set_ep_tx_cnt(USB, ep_ix, len); - } - pcd_set_ep_tx_status(USB, ep_ix, USB_EP_TX_VALID); } @@ -1037,8 +1039,15 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) xfer->buffer = (uint8_t*)_setup_packet; } - uint32_t bufsize = xfer->total_len > xfer->max_packet_size ? xfer->max_packet_size : xfer->total_len; - pcd_set_ep_rx_bufsize(USB, ep_idx, bufsize); + uint32_t cnt = xfer->total_len > xfer->max_packet_size ? xfer->max_packet_size : xfer->total_len; + uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx); + + if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + pcd_set_ep_rx_dbuf0_cnt(USB, ep_idx, cnt); + pcd_set_ep_rx_dbuf1_cnt(USB, ep_idx, cnt); + } else { + pcd_set_ep_rx_cnt(USB, ep_idx, cnt); + } pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_VALID); } -- cgit v1.3.1 From 472996e2bfbd14341e99aa58e9f0c24e69a5043e Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 9 Apr 2024 16:29:08 +0200 Subject: Ignore spurious RX interrupt. --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 4844c916d..a6d92c7c0 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -153,6 +153,7 @@ typedef struct uint16_t queued_len; uint16_t max_packet_size; uint8_t ep_idx; // index for USB_EPnR register + bool in_complete; // Workaround for ISO IN EP doesn't have interrupt mask } xfer_ctl_t; // EP allocator @@ -518,6 +519,19 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) pcd_clear_tx_ep_ctr(USB, EPindex); xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + + /* Ignore spurious int */ + if(xfer->in_complete) return; + xfer->in_complete = true; + + if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + if (wEPRegVal & USB_EP_DTOG_TX) { + pcd_set_ep_tx_dbuf0_cnt(USB, EPindex, 0); + } else { + pcd_set_ep_tx_dbuf1_cnt(USB, EPindex, 0); + } + } + if((xfer->total_len != xfer->queued_len)) /* TX not complete */ { dcd_transmit_packet(xfer, EPindex); @@ -1019,7 +1033,10 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) } xfer->queued_len = (uint16_t)(xfer->queued_len + len); + dcd_int_disable(0); pcd_set_ep_tx_status(USB, ep_ix, USB_EP_TX_VALID); + xfer->in_complete = false; + dcd_int_enable(0); } static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) -- cgit v1.3.1 From c0824472e8741ba67b660f34f27b5b4fcfe6c295 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 9 Apr 2024 22:15:18 +0200 Subject: Enable double buffer only for PMA > 1024b --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index a6d92c7c0..d85adfe95 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -950,20 +950,26 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet { (void)rhport; - TU_ASSERT(largest_packet_size <= 1024); + TU_ASSERT(largest_packet_size < 1024); uint8_t const ep_idx = dcd_ep_alloc(ep_addr, TUSB_XFER_ISOCHRONOUS); const uint16_t buffer_size = pcd_aligned_buffer_size(largest_packet_size); - /* Create a packet memory buffer area. Enable double buffering */ + /* Create a packet memory buffer area. Enable double buffering for devices with 2048 bytes PMA, + for smaller devices double buffering occupy too much space. */ +#if FSDEV_PMA_SIZE > 1024u uint32_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size, true); - - xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; + uint16_t pma_addr2 = pma_addr >> 16; +#else + uint32_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size, true); + uint16_t pma_addr2 = pma_addr; +#endif + pcd_set_ep_tx_address(USB, ep_idx, pma_addr); + pcd_set_ep_rx_address(USB, ep_idx, pma_addr2); pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); - pcd_set_ep_tx_address(USB, ep_idx, pma_addr & 0xFFFF); - pcd_set_ep_rx_address(USB, ep_idx, pma_addr >> 16); + xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; return true; } -- cgit v1.3.1 From 146c3c69450924d64795bd3d627ad1affaed5af7 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 9 Apr 2024 22:59:48 +0200 Subject: Cleanup. --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index d85adfe95..b89961d7d 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -184,7 +184,7 @@ static void dcd_ep_ctr_handler(void); // PMA allocation/access static uint16_t ep_buf_ptr; ///< Points to first free memory location -static uint32_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length, bool dbuf); +static uint32_t dcd_pma_alloc(uint16_t length, bool dbuf); static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes); static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes); @@ -649,14 +649,12 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { /* Set endpoint active again for receiving more data. * Note that isochronous endpoints stay active always */ if (!((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS)) { - uint32_t remaining = (uint32_t)xfer->total_len - (uint32_t)xfer->queued_len; - if(remaining >= xfer->max_packet_size) { - pcd_set_ep_rx_cnt(USB, EPindex,xfer->max_packet_size); - } else { - pcd_set_ep_rx_cnt(USB, EPindex,remaining); - } - pcd_set_ep_rx_status(USB, EPindex, USB_EP_RX_VALID); + uint16_t remaining = xfer->total_len - xfer->queued_len; + uint16_t cnt = remaining >= xfer->max_packet_size ? xfer->max_packet_size : remaining; + pcd_set_ep_rx_cnt(USB, EPindex, cnt); + pcd_set_ep_rx_cnt(USB, EPindex,remaining); } + pcd_set_ep_rx_status(USB, EPindex, USB_EP_RX_VALID); } } @@ -783,10 +781,8 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * re * In case of double buffering, high 16bit is the address of 2nd buffer * During failure, TU_ASSERT is used. If this happens, rework/reallocate memory manually. */ -static uint32_t dcd_pma_alloc(uint8_t ep_addr, uint16_t length, bool dbuf) +static uint32_t dcd_pma_alloc(uint16_t length, bool dbuf) { - xfer_ctl_t* epXferCtl = xfer_ctl_ptr(ep_addr); - // Ensure allocated buffer is aligned #ifdef FSDEV_BUS_32BIT length = (length + 3) & ~0x03; @@ -893,7 +889,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); /* Create a packet memory buffer area. */ - pma_addr = dcd_pma_alloc(p_endpoint_desc->bEndpointAddress, buffer_size, false); + pma_addr = dcd_pma_alloc(buffer_size, false); if(dir == TUSB_DIR_IN) { @@ -958,10 +954,10 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet /* Create a packet memory buffer area. Enable double buffering for devices with 2048 bytes PMA, for smaller devices double buffering occupy too much space. */ #if FSDEV_PMA_SIZE > 1024u - uint32_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size, true); + uint32_t pma_addr = dcd_pma_alloc(buffer_size, true); uint16_t pma_addr2 = pma_addr >> 16; #else - uint32_t pma_addr = dcd_pma_alloc(ep_addr, buffer_size, true); + uint32_t pma_addr = dcd_pma_alloc(buffer_size, true); uint16_t pma_addr2 = pma_addr; #endif pcd_set_ep_tx_address(USB, ep_idx, pma_addr); @@ -980,7 +976,6 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo uint8_t const ep_idx = xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->ep_idx; uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); - const uint16_t buffer_size = pcd_aligned_buffer_size(packet_size); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); @@ -1015,7 +1010,6 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) uint16_t ep_reg = pcd_get_endpoint(USB, ep_ix); uint16_t addr_ptr; - if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { if (ep_reg & USB_EP_DTOG_TX) { addr_ptr = pcd_get_ep_dbuf1_address(USB, ep_ix); -- cgit v1.3.1 From 402b084646b6d9c7c6520def6de343b7b7fdab07 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 9 Apr 2024 23:00:29 +0200 Subject: Format doc. --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 603 +++++++++++--------------- 1 file changed, 260 insertions(+), 343 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index b89961d7d..c11a8c625 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -107,9 +107,9 @@ #include "device/dcd.h" #ifdef TUP_USBIP_FSDEV_STM32 - // Undefine to reduce the dependence on HAL - #undef USE_HAL_DRIVER - #include "portable/st/stm32_fsdev/dcd_stm32_fsdev.h" +// Undefine to reduce the dependence on HAL +#undef USE_HAL_DRIVER +#include "portable/st/stm32_fsdev/dcd_stm32_fsdev.h" #endif /***************************************************** @@ -119,17 +119,17 @@ // HW supports max of 8 bidirectional endpoints, but this can be reduced to save RAM // (8u here would mean 8 IN and 8 OUT) #ifndef MAX_EP_COUNT -# define MAX_EP_COUNT 8U +#define MAX_EP_COUNT 8U #endif // If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it // Both of these MUST be a multiple of 2, and are in byte units. #ifndef DCD_STM32_BTABLE_BASE -# define DCD_STM32_BTABLE_BASE 0U +#define DCD_STM32_BTABLE_BASE 0U #endif #ifndef DCD_STM32_BTABLE_SIZE -# define DCD_STM32_BTABLE_SIZE (FSDEV_PMA_SIZE - DCD_STM32_BTABLE_BASE) +#define DCD_STM32_BTABLE_SIZE (FSDEV_PMA_SIZE - DCD_STM32_BTABLE_BASE) #endif /*************************************************** @@ -145,20 +145,18 @@ TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) % 8) == 0, "BTABLE base must be aligne //--------------------------------------------------------------------+ // One of these for every EP IN & OUT, uses a bit of RAM.... -typedef struct -{ - uint8_t * buffer; - tu_fifo_t * ff; +typedef struct { + uint8_t *buffer; + tu_fifo_t *ff; uint16_t total_len; uint16_t queued_len; uint16_t max_packet_size; - uint8_t ep_idx; // index for USB_EPnR register + uint8_t ep_idx; // index for USB_EPnR register bool in_complete; // Workaround for ISO IN EP doesn't have interrupt mask } xfer_ctl_t; // EP allocator -typedef struct -{ +typedef struct { uint8_t ep_num; uint8_t ep_type; bool allocated[2]; @@ -178,7 +176,7 @@ static uint8_t remoteWakeCountdown; // When wake is requested // into the stack. static void dcd_handle_bus_reset(void); -static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix); +static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix); static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr); static void dcd_ep_ctr_handler(void); @@ -189,14 +187,15 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes); static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes); -static bool dcd_write_packet_memory_ff(tu_fifo_t * ff, uint16_t dst, uint16_t wNBytes); -static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNBytes); +static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); +static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); //--------------------------------------------------------------------+ // Inline helper //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t* xfer_ctl_ptr(uint32_t ep_addr) { +TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint32_t ep_addr) +{ uint8_t epnum = tu_edpt_number(ep_addr); uint8_t dir = tu_edpt_dir(ep_addr); // Fix -Werror=null-dereference @@ -209,7 +208,7 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t* xfer_ctl_ptr(uint32_t ep_addr) { // Controller API //--------------------------------------------------------------------+ -void dcd_init (uint8_t rhport) +void dcd_init(uint8_t rhport) { /* Clocks should already be enabled */ /* Use __HAL_RCC_USB_CLK_ENABLE(); to enable the clocks before calling this function */ @@ -217,13 +216,13 @@ void dcd_init (uint8_t rhport) /* The RM mentions to use a special ordering of PDWN and FRES, but this isn't done in HAL. * Here, the RM is followed. */ - for(uint32_t i = 0; i<200; i++) // should be a few us + for (uint32_t i = 0; i < 200; i++) // should be a few us { asm("NOP"); } // Perform USB peripheral reset USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; - for(uint32_t i = 0; i<200; i++) // should be a few us + for (uint32_t i = 0; i < 200; i++) // should be a few us { asm("NOP"); } @@ -231,29 +230,29 @@ void dcd_init (uint8_t rhport) USB->CNTR &= ~USB_CNTR_PDWN; // Wait startup time, for F042 and F070, this is <= 1 us. - for(uint32_t i = 0; i<200; i++) // should be a few us + for (uint32_t i = 0; i < 200; i++) // should be a few us { asm("NOP"); } USB->CNTR = 0; // Enable USB -#if !defined(STM32G0) && !defined(STM32H5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address +#if !defined(STM32G0) && !defined(STM32H5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address USB->BTABLE = DCD_STM32_BTABLE_BASE; #endif USB->ISTR = 0; // Clear pending interrupts // Reset endpoints to disabled - for(uint32_t i=0; iCNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; dcd_handle_bus_reset(); // Enable pull-up if supported - if ( dcd_connect ) dcd_connect(rhport); + if (dcd_connect) + dcd_connect(rhport); } // Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. @@ -262,14 +261,14 @@ void dcd_init (uint8_t rhport) // Disable internal D+ PU void dcd_disconnect(uint8_t rhport) { - (void) rhport; + (void)rhport; USB->BCDR &= ~(USB_BCDR_DPPU); } // Enable internal D+ PU void dcd_connect(uint8_t rhport) { - (void) rhport; + (void)rhport; USB->BCDR |= USB_BCDR_DPPU; } @@ -277,60 +276,54 @@ void dcd_connect(uint8_t rhport) // Disable internal D+ PU void dcd_disconnect(uint8_t rhport) { - (void) rhport; + (void)rhport; SYSCFG->PMC &= ~(SYSCFG_PMC_USB_PU); } // Enable internal D+ PU void dcd_connect(uint8_t rhport) { - (void) rhport; + (void)rhport; SYSCFG->PMC |= SYSCFG_PMC_USB_PU; } #endif void dcd_sof_enable(uint8_t rhport, bool en) { - (void) rhport; - (void) en; + (void)rhport; + (void)en; - if (en) - { + if (en) { USB->CNTR |= USB_CNTR_SOFM; - } - else - { + } else { USB->CNTR &= ~USB_CNTR_SOFM; } } // Enable device interrupt -void dcd_int_enable (uint8_t rhport) +void dcd_int_enable(uint8_t rhport) { (void)rhport; // Member here forces write to RAM before allowing ISR to execute __DSB(); __ISB(); -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || \ - CFG_TUSB_MCU == OPT_MCU_STM32L4 +#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || CFG_TUSB_MCU == OPT_MCU_STM32L4 NVIC_EnableIRQ(USB_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32L1 NVIC_EnableIRQ(USB_LP_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32F3 - // Some STM32F302/F303 devices allow to remap the USB interrupt vectors from - // shared USB/CAN IRQs to separate CAN and USB IRQs. - // This dynamically checks if this remap is active to enable the right IRQs. - #ifdef SYSCFG_CFGR1_USB_IT_RMP - if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) - { +// Some STM32F302/F303 devices allow to remap the USB interrupt vectors from +// shared USB/CAN IRQs to separate CAN and USB IRQs. +// This dynamically checks if this remap is active to enable the right IRQs. +#ifdef SYSCFG_CFGR1_USB_IT_RMP + if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { NVIC_EnableIRQ(USB_HP_IRQn); NVIC_EnableIRQ(USB_LP_IRQn); NVIC_EnableIRQ(USBWakeUp_RMP_IRQn); - } - else - #endif + } else +#endif { NVIC_EnableIRQ(USB_HP_CAN_TX_IRQn); NVIC_EnableIRQ(USB_LP_CAN_RX0_IRQn); @@ -347,14 +340,14 @@ void dcd_int_enable (uint8_t rhport) NVIC_EnableIRQ(USBWakeUp_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32G0 - #ifdef STM32G0B0xx - NVIC_EnableIRQ(USB_IRQn); - #else - NVIC_EnableIRQ(USB_UCPD1_2_IRQn); - #endif +#ifdef STM32G0B0xx + NVIC_EnableIRQ(USB_IRQn); +#else + NVIC_EnableIRQ(USB_UCPD1_2_IRQn); +#endif #elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - NVIC_EnableIRQ(USB_DRD_FS_IRQn); + NVIC_EnableIRQ(USB_DRD_FS_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32WB NVIC_EnableIRQ(USB_HP_IRQn); @@ -364,7 +357,7 @@ void dcd_int_enable (uint8_t rhport) NVIC_EnableIRQ(USB_FS_IRQn); #else - #error Unknown arch in USB driver +#error Unknown arch in USB driver #endif } @@ -373,24 +366,21 @@ void dcd_int_disable(uint8_t rhport) { (void)rhport; -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || \ - CFG_TUSB_MCU == OPT_MCU_STM32L4 +#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || CFG_TUSB_MCU == OPT_MCU_STM32L4 NVIC_DisableIRQ(USB_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32L1 NVIC_DisableIRQ(USB_LP_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32F3 - // Some STM32F302/F303 devices allow to remap the USB interrupt vectors from - // shared USB/CAN IRQs to separate CAN and USB IRQs. - // This dynamically checks if this remap is active to disable the right IRQs. - #ifdef SYSCFG_CFGR1_USB_IT_RMP - if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) - { +// Some STM32F302/F303 devices allow to remap the USB interrupt vectors from +// shared USB/CAN IRQs to separate CAN and USB IRQs. +// This dynamically checks if this remap is active to disable the right IRQs. +#ifdef SYSCFG_CFGR1_USB_IT_RMP + if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { NVIC_DisableIRQ(USB_HP_IRQn); NVIC_DisableIRQ(USB_LP_IRQn); NVIC_DisableIRQ(USBWakeUp_RMP_IRQn); - } - else - #endif + } else +#endif { NVIC_DisableIRQ(USB_HP_CAN_TX_IRQn); NVIC_DisableIRQ(USB_LP_CAN_RX0_IRQn); @@ -407,14 +397,14 @@ void dcd_int_disable(uint8_t rhport) NVIC_DisableIRQ(USBWakeUp_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32G0 - #ifdef STM32G0B0xx - NVIC_DisableIRQ(USB_IRQn); - #else - NVIC_DisableIRQ(USB_UCPD1_2_IRQn); - #endif +#ifdef STM32G0B0xx + NVIC_DisableIRQ(USB_IRQn); +#else + NVIC_DisableIRQ(USB_UCPD1_2_IRQn); +#endif #elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - NVIC_DisableIRQ(USB_DRD_FS_IRQn); + NVIC_DisableIRQ(USB_DRD_FS_IRQn); #elif CFG_TUSB_MCU == OPT_MCU_STM32WB NVIC_DisableIRQ(USB_HP_IRQn); @@ -424,7 +414,7 @@ void dcd_int_disable(uint8_t rhport) NVIC_DisableIRQ(USB_FS_IRQn); #else - #error Unknown arch in USB driver +#error Unknown arch in USB driver #endif // CMSIS has a membar after disabling interrupts @@ -433,8 +423,8 @@ void dcd_int_disable(uint8_t rhport) // Receive Set Address request, mcu port must also include status IN response void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { - (void) rhport; - (void) dev_addr; + (void)rhport; + (void)dev_addr; // Respond with status dcd_edpt_xfer(rhport, TUSB_DIR_IN_MASK | 0x00, NULL, 0); @@ -445,43 +435,36 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) void dcd_remote_wakeup(uint8_t rhport) { - (void) rhport; + (void)rhport; USB->CNTR |= USB_CNTR_RESUME; remoteWakeCountdown = 4u; // required to be 1 to 15 ms, ESOF should trigger every 1ms. } -static const tusb_desc_endpoint_t ep0OUT_desc = -{ - .bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, +static const tusb_desc_endpoint_t ep0OUT_desc = {.bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, - .bEndpointAddress = 0x00, - .bmAttributes = { .xfer = TUSB_XFER_CONTROL }, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0 -}; + .bEndpointAddress = 0x00, + .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, + .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, + .bInterval = 0}; -static const tusb_desc_endpoint_t ep0IN_desc = -{ - .bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, +static const tusb_desc_endpoint_t ep0IN_desc = {.bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, - .bEndpointAddress = 0x80, - .bmAttributes = { .xfer = TUSB_XFER_CONTROL }, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0 -}; + .bEndpointAddress = 0x80, + .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, + .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, + .bInterval = 0}; static void dcd_handle_bus_reset(void) { //__IO uint16_t * const epreg = &(EPREG(0)); USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag - for(uint32_t i=0; iDADDR = USB_DADDR_EF; // Set enable flag, and leaving the device address as zero. } @@ -510,18 +493,18 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) // Verify the CTR_TX bit is set. This was in the ST Micro code, // but I'm not sure it's actually necessary? - if((wEPRegVal & USB_EP_CTR_TX) == 0U) - { + if ((wEPRegVal & USB_EP_CTR_TX) == 0U) { return; } /* clear int flag */ pcd_clear_tx_ep_ctr(USB, EPindex); - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); /* Ignore spurious int */ - if(xfer->in_complete) return; + if (xfer->in_complete) + return; xfer->in_complete = true; if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { @@ -532,11 +515,10 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) } } - if((xfer->total_len != xfer->queued_len)) /* TX not complete */ + if ((xfer->total_len != xfer->queued_len)) /* TX not complete */ { dcd_transmit_packet(xfer, EPindex); - } - else /* TX Complete */ + } else /* TX Complete */ { dcd_event_xfer_complete(0, ep_addr, xfer->total_len, XFER_RESULT_SUCCESS, true); } @@ -544,8 +526,9 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) // Handle CTR interrupt for the RX/OUT direction // Upon call, (wIstr & USB_ISTR_DIR) == 0U -static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { - #ifdef FSDEV_BUS_32BIT +static void dcd_ep_ctr_rx_handler(uint32_t wIstr) +{ +#ifdef FSDEV_BUS_32BIT /* https://www.st.com/resource/en/errata_sheet/es0561-stm32h503cbebkbrb-device-errata-stmicroelectronics.pdf * From STM32H503 errata 2.15.1: Buffer description table update completes after CTR interrupt triggers * Description: @@ -564,7 +547,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { while (cycle_count > 0U) { cycle_count--; // each count take 2 cycle (1 cycle for sub, 1 cycle for compare/jump) } - #endif +#endif uint32_t EPindex = wIstr & USB_ISTR_EP_ID; uint32_t wEPRegVal = pcd_get_endpoint(USB, EPindex); @@ -574,34 +557,32 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { // Verify the CTR_RX bit is set. This was in the ST Micro code, // but I'm not sure it's actually necessary? - if((wEPRegVal & USB_EP_CTR_RX) == 0U) { + if ((wEPRegVal & USB_EP_CTR_RX) == 0U) { return; } - if((ep_addr == 0U) && ((wEPRegVal & USB_EP_SETUP) != 0U)) /* Setup packet */ + if ((ep_addr == 0U) && ((wEPRegVal & USB_EP_SETUP) != 0U)) /* Setup packet */ { uint32_t count = pcd_get_ep_rx_cnt(USB, EPindex); /* Get SETUP Packet*/ - if(count == 8) // Setup packet should always be 8 bytes. If not, ignore it, and try again. + if (count == 8) // Setup packet should always be 8 bytes. If not, ignore it, and try again. { // Must reset EP to NAK (in case it had been stalling) (though, maybe too late here) - pcd_set_ep_rx_status(USB,0u,USB_EP_RX_NAK); - pcd_set_ep_tx_status(USB,0u,USB_EP_TX_NAK); + pcd_set_ep_rx_status(USB, 0u, USB_EP_RX_NAK); + pcd_set_ep_tx_status(USB, 0u, USB_EP_TX_NAK); #ifdef FSDEV_BUS_32BIT - dcd_event_setup_received(0, (uint8_t*)(USB_PMAADDR + pcd_get_ep_rx_address(USB, EPindex)), true); + dcd_event_setup_received(0, (uint8_t *)(USB_PMAADDR + pcd_get_ep_rx_address(USB, EPindex)), true); #else // The setup_received function uses memcpy, so this must first copy the setup data into // user memory, to allow for the 32-bit access that memcpy performs. uint8_t userMemBuf[8]; - dcd_read_packet_memory(userMemBuf, pcd_get_ep_rx_address(USB,EPindex), 8); - dcd_event_setup_received(0, (uint8_t*)userMemBuf, true); + dcd_read_packet_memory(userMemBuf, pcd_get_ep_rx_address(USB, EPindex), 8); + dcd_event_setup_received(0, (uint8_t *)userMemBuf, true); #endif } - } - else - { + } else { // Clear RX CTR interrupt flag - if(ep_addr != 0u) { + if (ep_addr != 0u) { pcd_clear_rx_ep_ctr(USB, EPindex); } @@ -623,36 +604,29 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { TU_ASSERT(count <= xfer->max_packet_size, /**/); - if (count != 0U) - { - if (xfer->ff) - { + if (count != 0U) { + if (xfer->ff) { dcd_read_packet_memory_ff(xfer->ff, addr, count); - } - else - { + } else { dcd_read_packet_memory(&(xfer->buffer[xfer->queued_len]), addr, count); } xfer->queued_len = (uint16_t)(xfer->queued_len + count); } - if ((count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len)) - { + if ((count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len)) { /* RX COMPLETE */ dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); // Though the host could still send, we don't know. // Does the bulk pipe need to be reset to valid to allow for a ZLP? - } - else - { + } else { /* Set endpoint active again for receiving more data. * Note that isochronous endpoints stay active always */ if (!((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS)) { uint16_t remaining = xfer->total_len - xfer->queued_len; uint16_t cnt = remaining >= xfer->max_packet_size ? xfer->max_packet_size : remaining; pcd_set_ep_rx_cnt(USB, EPindex, cnt); - pcd_set_ep_rx_cnt(USB, EPindex,remaining); + pcd_set_ep_rx_cnt(USB, EPindex, remaining); } pcd_set_ep_rx_status(USB, EPindex, USB_EP_RX_VALID); } @@ -661,15 +635,15 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { // For EP0, prepare to receive another SETUP packet. // Clear CTR last so that a new packet does not overwrite the packing being read. // (Based on the docs, it seems SETUP will always be accepted after CTR is cleared) - if(ep_addr == 0u) - { + if (ep_addr == 0u) { // Always be prepared for a status packet... pcd_set_ep_rx_cnt(USB, EPindex, CFG_TUD_ENDPOINT0_SIZE); pcd_clear_rx_ep_ctr(USB, EPindex); } } -static void dcd_ep_ctr_handler(void) { +static void dcd_ep_ctr_handler(void) +{ uint32_t wIstr; /* stay in loop while pending interrupts */ @@ -684,26 +658,27 @@ static void dcd_ep_ctr_handler(void) { } } -void dcd_int_handler(uint8_t rhport) { +void dcd_int_handler(uint8_t rhport) +{ - (void) rhport; + (void)rhport; uint32_t int_status = USB->ISTR; - //const uint32_t handled_ints = USB_ISTR_CTR | USB_ISTR_RESET | USB_ISTR_WKUP - // | USB_ISTR_SUSP | USB_ISTR_SOF | USB_ISTR_ESOF; - // unused IRQs: (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_L1REQ ) + // const uint32_t handled_ints = USB_ISTR_CTR | USB_ISTR_RESET | USB_ISTR_WKUP + // | USB_ISTR_SUSP | USB_ISTR_SOF | USB_ISTR_ESOF; + // unused IRQs: (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_L1REQ ) // The ST driver loops here on the CTR bit, but that loop has been moved into the // dcd_ep_ctr_handler(), so less need to loop here. The other interrupts shouldn't // be triggered repeatedly. /* Put SOF flag at the beginning of ISR in case to get least amount of jitter if it is used for timing purposes */ - if(int_status & USB_ISTR_SOF) { + if (int_status & USB_ISTR_SOF) { USB->ISTR = (fsdev_bus_t)~USB_ISTR_SOF; dcd_event_sof(0, USB->FNR & USB_FNR_FN, true); } - if(int_status & USB_ISTR_RESET) { + if (int_status & USB_ISTR_RESET) { // USBRST is start of reset. USB->ISTR = (fsdev_bus_t)~USB_ISTR_RESET; dcd_handle_bus_reset(); @@ -711,15 +686,13 @@ void dcd_int_handler(uint8_t rhport) { return; // Don't do the rest of the things here; perhaps they've been cleared? } - if (int_status & USB_ISTR_CTR) - { + if (int_status & USB_ISTR_CTR) { /* servicing of the endpoint correct transfer interrupt */ /* clear of the CTR flag into the sub */ dcd_ep_ctr_handler(); } - if (int_status & USB_ISTR_WKUP) - { + if (int_status & USB_ISTR_WKUP) { USB->CNTR &= ~USB_CNTR_LPMODE; USB->CNTR &= ~USB_CNTR_FSUSP; @@ -727,8 +700,7 @@ void dcd_int_handler(uint8_t rhport) { dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); } - if (int_status & USB_ISTR_SUSP) - { + if (int_status & USB_ISTR_SUSP) { /* Suspend is asserted for both suspend and unplug events. without Vbus monitoring, * these events cannot be differentiated, so we only trigger suspend. */ @@ -741,13 +713,11 @@ void dcd_int_handler(uint8_t rhport) { dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true); } - if(int_status & USB_ISTR_ESOF) { - if(remoteWakeCountdown == 1u) - { + if (int_status & USB_ISTR_ESOF) { + if (remoteWakeCountdown == 1u) { USB->CNTR &= ~USB_CNTR_RESUME; } - if(remoteWakeCountdown > 0u) - { + if (remoteWakeCountdown > 0u) { remoteWakeCountdown--; } USB->ISTR = (fsdev_bus_t)~USB_ISTR_ESOF; @@ -760,15 +730,12 @@ void dcd_int_handler(uint8_t rhport) { // Invoked when a control transfer's status stage is complete. // May help DCD to prepare for next control transfer, this API is optional. -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request) +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { - (void) rhport; + (void)rhport; - if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && - request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && - request->bRequest == TUSB_REQ_SET_ADDRESS ) - { - uint8_t const dev_addr = (uint8_t) request->wValue; + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && request->bRequest == TUSB_REQ_SET_ADDRESS) { + uint8_t const dev_addr = (uint8_t)request->wValue; // Setting new address after the whole request is complete USB->DADDR &= ~USB_DADDR_ADD; @@ -793,7 +760,7 @@ static uint32_t dcd_pma_alloc(uint16_t length, bool dbuf) uint32_t addr = ep_buf_ptr; ep_buf_ptr = (uint16_t)(ep_buf_ptr + length); // increment buffer pointer - if(dbuf) { + if (dbuf) { addr |= ((uint32_t)ep_buf_ptr) << 16; ep_buf_ptr = (uint16_t)(ep_buf_ptr + length); // increment buffer pointer } @@ -810,31 +777,21 @@ static uint32_t dcd_pma_alloc(uint16_t length, bool dbuf) static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) { uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - for(uint8_t i = 0; i < STFSDEV_EP_COUNT; i++) - { + for (uint8_t i = 0; i < STFSDEV_EP_COUNT; i++) { // Check if already allocated - if(ep_alloc_status[i].allocated[dir] && - ep_alloc_status[i].ep_type == ep_type && - ep_alloc_status[i].ep_num == epnum) - { + if (ep_alloc_status[i].allocated[dir] && ep_alloc_status[i].ep_type == ep_type && ep_alloc_status[i].ep_num == epnum) { return i; } // If EP of current direction is not allocated // Except for ISO endpoint, both direction should be free - if(!ep_alloc_status[i].allocated[dir] && - (ep_type != TUSB_XFER_ISOCHRONOUS || !ep_alloc_status[i].allocated[dir ^ 1])) - { + if (!ep_alloc_status[i].allocated[dir] && (ep_type != TUSB_XFER_ISOCHRONOUS || !ep_alloc_status[i].allocated[dir ^ 1])) { // Check if EP number is the same - if(ep_alloc_status[i].ep_num == 0xFF || - ep_alloc_status[i].ep_num == epnum) - { + if (ep_alloc_status[i].ep_num == 0xFF || ep_alloc_status[i].ep_num == epnum) { // One EP pair has to be the same type - if(ep_alloc_status[i].ep_type == 0xFF || - ep_alloc_status[i].ep_type == ep_type) - { + if (ep_alloc_status[i].ep_type == 0xFF || ep_alloc_status[i].ep_type == ep_type) { ep_alloc_status[i].ep_num = epnum; ep_alloc_status[i].ep_type = ep_type; ep_alloc_status[i].allocated[dir] = true; @@ -852,11 +809,11 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) // The STM32F0 doesn't seem to like |= or &= to manipulate the EP#R registers, // so I'm using the #define from HAL here, instead. -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) { (void)rhport; uint8_t const ep_idx = dcd_ep_alloc(p_endpoint_desc->bEndpointAddress, p_endpoint_desc->bmAttributes.xfer); - uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); const uint16_t buffer_size = pcd_aligned_buffer_size(packet_size); uint16_t pma_addr; @@ -869,7 +826,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) TU_ASSERT(p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS); // Set type - switch(p_endpoint_desc->bmAttributes.xfer) { + switch (p_endpoint_desc->bmAttributes.xfer) { case TUSB_XFER_CONTROL: wType = USB_EP_CONTROL; break; @@ -891,15 +848,13 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) /* Create a packet memory buffer area. */ pma_addr = dcd_pma_alloc(buffer_size, false); - if(dir == TUSB_DIR_IN) - { + if (dir == TUSB_DIR_IN) { pcd_set_ep_tx_address(USB, ep_idx, pma_addr); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); pcd_clear_tx_dtog(USB, ep_idx); } - if(dir == TUSB_DIR_OUT) - { + if (dir == TUSB_DIR_OUT) { pcd_set_ep_rx_address(USB, ep_idx, pma_addr); pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); pcd_clear_rx_dtog(USB, ep_idx); @@ -911,9 +866,9 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } -void dcd_edpt_close_all (uint8_t rhport) +void dcd_edpt_close_all(uint8_t rhport) { - (void) rhport; + (void)rhport; // TODO implement dcd_edpt_close_all() } @@ -928,16 +883,13 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - if(dir == TUSB_DIR_IN) - { + if (dir == TUSB_DIR_IN) { pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); - } - else - { + } else { pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); } } @@ -970,11 +922,11 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet return true; } -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) { (void)rhport; uint8_t const ep_idx = xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->ep_idx; - uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); + uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); @@ -985,7 +937,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo pcd_clear_tx_dtog(USB, ep_idx); pcd_clear_rx_dtog(USB, ep_idx); - if(dir == TUSB_DIR_IN) { + if (dir == TUSB_DIR_IN) { pcd_rx_dtog(USB, ep_idx); } else { pcd_tx_dtog(USB, ep_idx); @@ -998,11 +950,11 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo // Currently, single-buffered, and only 64 bytes at a time (max) -static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) +static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t len = (uint16_t)(xfer->total_len - xfer->queued_len); - if(len > xfer->max_packet_size) // max packet size for FS transfer + if (len > xfer->max_packet_size) // max packet size for FS transfer { len = xfer->max_packet_size; } @@ -1023,12 +975,9 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) pcd_set_ep_tx_cnt(USB, ep_ix, len); } - if (xfer->ff) - { + if (xfer->ff) { dcd_write_packet_memory_ff(xfer->ff, addr_ptr, len); - } - else - { + } else { dcd_write_packet_memory(addr_ptr, &(xfer->buffer[xfer->queued_len]), len); } xfer->queued_len = (uint16_t)(xfer->queued_len + len); @@ -1041,19 +990,17 @@ static void dcd_transmit_packet(xfer_ctl_t * xfer, uint16_t ep_ix) static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; + (void)rhport; - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - if ( dir == TUSB_DIR_OUT ) - { + if (dir == TUSB_DIR_OUT) { // A setup token can occur immediately after an OUT STATUS packet so make sure we have a valid // buffer for the control endpoint. - if (ep_idx == 0 && xfer->buffer == NULL) - { - xfer->buffer = (uint8_t*)_setup_packet; + if (ep_idx == 0 && xfer->buffer == NULL) { + xfer->buffer = (uint8_t *)_setup_packet; } uint32_t cnt = xfer->total_len > xfer->max_packet_size ? xfer->max_packet_size : xfer->total_len; @@ -1067,75 +1014,68 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) } pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_VALID); - } - else // IN + } else // IN { - dcd_transmit_packet(xfer,ep_idx); + dcd_transmit_packet(xfer, ep_idx); } return true; } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); xfer->buffer = buffer; - xfer->ff = NULL; + xfer->ff = NULL; xfer->total_len = total_bytes; xfer->queued_len = 0; return edpt_xfer(rhport, ep_addr); } -bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes) { - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); xfer->buffer = NULL; - xfer->ff = ff; + xfer->ff = ff; xfer->total_len = total_bytes; xfer->queued_len = 0; return edpt_xfer(rhport, ep_addr); } -void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_IN) - { // IN + if (dir == TUSB_DIR_IN) { // IN pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_STALL); - } - else - { // OUT + } else { // OUT pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_STALL); } } -void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - xfer_ctl_t * xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_IN) - { // IN - if (pcd_get_eptype(USB, ep_idx) != USB_EP_ISOCHRONOUS) { + if (dir == TUSB_DIR_IN) { // IN + if (pcd_get_eptype(USB, ep_idx) != USB_EP_ISOCHRONOUS) { pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); } /* Reset to DATA0 if clearing stall condition. */ pcd_clear_tx_dtog(USB, ep_idx); - } - else - { // OUT - if (pcd_get_eptype(USB, ep_idx) != USB_EP_ISOCHRONOUS) { + } else { // OUT + if (pcd_get_eptype(USB, ep_idx) != USB_EP_ISOCHRONOUS) { pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); } /* Reset to DATA0 if clearing stall condition. */ @@ -1146,8 +1086,8 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) #ifdef FSDEV_BUS_32BIT static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) { - const uint8_t* srcVal = src; - volatile uint32_t* dst32 = (volatile uint32_t*)(USB_PMAADDR + dst); + const uint8_t *srcVal = src; + volatile uint32_t *dst32 = (volatile uint32_t *)(USB_PMAADDR + dst); for (uint32_t n = wNBytes / 4; n > 0; --n) { *dst32++ = tu_unaligned_read32(srcVal); @@ -1155,18 +1095,15 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui } wNBytes = wNBytes & 0x03; - if (wNBytes) - { + if (wNBytes) { uint32_t wrVal = *srcVal; wNBytes--; - if (wNBytes) - { + if (wNBytes) { wrVal |= *++srcVal << 8; wNBytes--; - if (wNBytes) - { + if (wNBytes) { wrVal |= *++srcVal << 16; } } @@ -1179,20 +1116,20 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui #else // Packet buffer access can only be 8- or 16-bit. /** - * @brief Copy a buffer from user memory area to packet memory area (PMA). - * This uses byte-access for user memory (so support non-aligned buffers) - * and 16-bit access for packet memory. - * @param dst, byte address in PMA; must be 16-bit aligned - * @param src pointer to user memory area. - * @param wPMABufAddr address into PMA. - * @param wNBytes no. of bytes to be copied. - * @retval None - */ + * @brief Copy a buffer from user memory area to packet memory area (PMA). + * This uses byte-access for user memory (so support non-aligned buffers) + * and 16-bit access for packet memory. + * @param dst, byte address in PMA; must be 16-bit aligned + * @param src pointer to user memory area. + * @param wPMABufAddr address into PMA. + * @param wNBytes no. of bytes to be copied. + * @retval None + */ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) { uint32_t n = (uint32_t)wNBytes >> 1U; uint16_t temp1, temp2; - const uint8_t * srcVal; + const uint8_t *srcVal; // The GCC optimizer will combine access to 32-bit sizes if we let it. Force // it volatile so that it won't do that. @@ -1201,18 +1138,16 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui srcVal = src; pdwVal = &pma[FSDEV_PMA_STRIDE * (dst >> 1)]; - while (n--) - { + while (n--) { temp1 = (uint16_t)*srcVal; srcVal++; - temp2 = temp1 | ((uint16_t)(((uint16_t)(*srcVal)) << 8U)) ; + temp2 = temp1 | ((uint16_t)(((uint16_t)(*srcVal)) << 8U)); *pdwVal = temp2; pdwVal += FSDEV_PMA_STRIDE; srcVal++; } - if (wNBytes) - { + if (wNBytes) { temp1 = *srcVal; *pdwVal = temp1; } @@ -1222,42 +1157,39 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui #endif /** - * @brief Copy from FIFO to packet memory area (PMA). - * Uses byte-access of system memory and 16-bit access of packet memory - * @param wNBytes no. of bytes to be copied. - * @retval None - */ -static bool dcd_write_packet_memory_ff(tu_fifo_t * ff, uint16_t dst, uint16_t wNBytes) + * @brief Copy from FIFO to packet memory area (PMA). + * Uses byte-access of system memory and 16-bit access of packet memory + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) { // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies tu_fifo_buffer_info_t info; tu_fifo_get_read_info(ff, &info); - uint16_t cnt_lin = TU_MIN(wNBytes, info.len_lin); + uint16_t cnt_lin = TU_MIN(wNBytes, info.len_lin); uint16_t cnt_wrap = TU_MIN(wNBytes - cnt_lin, info.len_wrap); // We want to read from the FIFO and write it into the PMA, if LIN part is ODD and has WRAPPED part, // last lin byte will be combined with wrapped part // To ensure PMA is always access aligned (dst aligned to 16 or 32 bit) #ifdef FSDEV_BUS_32BIT - if((cnt_lin & 0x03) && cnt_wrap) - { + if ((cnt_lin & 0x03) && cnt_wrap) { // Copy first linear part - dcd_write_packet_memory(dst, info.ptr_lin, cnt_lin &~0x03); - dst += cnt_lin &~0x03; + dcd_write_packet_memory(dst, info.ptr_lin, cnt_lin & ~0x03); + dst += cnt_lin & ~0x03; // Copy last linear bytes & first wrapped bytes to buffer uint32_t i; uint8_t tmp[4]; - for (i = 0; i < (cnt_lin & 0x03); i++) - { - tmp[i] = ((uint8_t*)info.ptr_lin)[(cnt_lin &~0x03) + i]; + for (i = 0; i < (cnt_lin & 0x03); i++) { + tmp[i] = ((uint8_t *)info.ptr_lin)[(cnt_lin & ~0x03) + i]; } uint32_t wCnt = cnt_wrap; - for (; i < 4 && wCnt > 0; i++, wCnt--) - { - tmp[i] = *(uint8_t*)info.ptr_wrap; - info.ptr_wrap = (uint8_t*)info.ptr_wrap + 1; + for (; i < 4 && wCnt > 0; i++, wCnt--) { + tmp[i] = *(uint8_t *)info.ptr_wrap; + info.ptr_wrap = (uint8_t *)info.ptr_wrap + 1; } // Write unaligned buffer @@ -1266,32 +1198,29 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t * ff, uint16_t dst, uint16_t wN // Copy rest of wrapped byte if (wCnt) - dcd_write_packet_memory(dst, info.ptr_wrap, wCnt); + dcd_write_packet_memory(dst, info.ptr_wrap, wCnt); } #else - if((cnt_lin & 0x01) && cnt_wrap) - { + if ((cnt_lin & 0x01) && cnt_wrap) { // Copy first linear part - dcd_write_packet_memory(dst, info.ptr_lin, cnt_lin &~0x01); - dst += cnt_lin &~0x01; + dcd_write_packet_memory(dst, info.ptr_lin, cnt_lin & ~0x01); + dst += cnt_lin & ~0x01; // Copy last linear byte & first wrapped byte - uint16_t tmp = ((uint8_t*)info.ptr_lin)[cnt_lin - 1] | ((uint16_t)(((uint8_t*)info.ptr_wrap)[0]) << 8U); + uint16_t tmp = ((uint8_t *)info.ptr_lin)[cnt_lin - 1] | ((uint16_t)(((uint8_t *)info.ptr_wrap)[0]) << 8U); dcd_write_packet_memory(dst, &tmp, 2); dst += 2; // Copy rest of wrapped byte - dcd_write_packet_memory(dst, ((uint8_t*)info.ptr_wrap) + 1, cnt_wrap - 1); + dcd_write_packet_memory(dst, ((uint8_t *)info.ptr_wrap) + 1, cnt_wrap - 1); } #endif - else - { + else { // Copy linear part dcd_write_packet_memory(dst, info.ptr_lin, cnt_lin); dst += info.len_lin; - if(info.len_wrap) - { + if (info.len_wrap) { // Copy wrapped byte dcd_write_packet_memory(dst, info.ptr_wrap, cnt_wrap); } @@ -1305,8 +1234,8 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t * ff, uint16_t dst, uint16_t wN #ifdef FSDEV_BUS_32BIT static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { - uint8_t* dstVal = dst; - volatile uint32_t* src32 = (volatile uint32_t*)(USB_PMAADDR + src); + uint8_t *dstVal = dst; + volatile uint32_t *src32 = (volatile uint32_t *)(USB_PMAADDR + src); for (uint32_t n = wNBytes / 4; n > 0; --n) { tu_unaligned_write32(dstVal, *src32++); @@ -1314,20 +1243,17 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t } wNBytes = wNBytes & 0x03; - if (wNBytes) - { + if (wNBytes) { uint32_t rdVal = *src32; *dstVal = tu_u32_byte0(rdVal); wNBytes--; - if (wNBytes) - { + if (wNBytes) { *++dstVal = tu_u32_byte1(rdVal); wNBytes--; - if (wNBytes) - { + if (wNBytes) { *++dstVal = tu_u32_byte2(rdVal); } } @@ -1337,11 +1263,11 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t } #else /** - * @brief Copy a buffer from packet memory area (PMA) to user memory area. - * Uses byte-access of system memory and 16-bit access of packet memory - * @param wNBytes no. of bytes to be copied. - * @retval None - */ + * @brief Copy a buffer from packet memory area (PMA) to user memory area. + * Uses byte-access of system memory and 16-bit access of packet memory + * @param wNBytes no. of bytes to be copied. + * @retval None + */ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { uint32_t n = (uint32_t)wNBytes >> 1U; @@ -1351,18 +1277,16 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t uint32_t temp; pdwVal = &pma[FSDEV_PMA_STRIDE * (src >> 1)]; - uint8_t *dstVal = (uint8_t*)dst; + uint8_t *dstVal = (uint8_t *)dst; - while (n--) - { + while (n--) { temp = *pdwVal; pdwVal += FSDEV_PMA_STRIDE; *dstVal++ = ((temp >> 0) & 0xFF); *dstVal++ = ((temp >> 8) & 0xFF); } - if (wNBytes & 0x01) - { + if (wNBytes & 0x01) { temp = *pdwVal; pdwVal += FSDEV_PMA_STRIDE; *dstVal++ = ((temp >> 0) & 0xFF); @@ -1372,31 +1296,29 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t #endif /** - * @brief Copy a buffer from user packet memory area (PMA) to FIFO. - * Uses byte-access of system memory and 16-bit access of packet memory - * @param wNBytes no. of bytes to be copied. - * @retval None - */ -static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNBytes) + * @brief Copy a buffer from user packet memory area (PMA) to FIFO. + * Uses byte-access of system memory and 16-bit access of packet memory + * @param wNBytes no. of bytes to be copied. + * @retval None + */ +static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) { // Since we copy into a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies // Check for first linear part tu_fifo_buffer_info_t info; - tu_fifo_get_write_info(ff, &info); // We want to read from the FIFO + tu_fifo_get_write_info(ff, &info); // We want to read from the FIFO - uint16_t cnt_lin = TU_MIN(wNBytes, info.len_lin); + uint16_t cnt_lin = TU_MIN(wNBytes, info.len_lin); uint16_t cnt_wrap = TU_MIN(wNBytes - cnt_lin, info.len_wrap); - // We want to read from PMA and write it into the FIFO, if LIN part is ODD and has WRAPPED part, // last lin byte will be combined with wrapped part // To ensure PMA is always access aligned (src aligned to 16 or 32 bit) #ifdef FSDEV_BUS_32BIT - if((cnt_lin & 0x03) && cnt_wrap) - { + if ((cnt_lin & 0x03) && cnt_wrap) { // Copy first linear part - dcd_read_packet_memory(info.ptr_lin, src, cnt_lin &~0x03); - src += cnt_lin &~0x03; + dcd_read_packet_memory(info.ptr_lin, src, cnt_lin & ~0x03); + src += cnt_lin & ~0x03; // Copy last linear bytes & first wrapped bytes uint8_t tmp[4]; @@ -1404,15 +1326,13 @@ static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNB src += 4; uint32_t i; - for (i = 0; i < (cnt_lin & 0x03); i++) - { - ((uint8_t*)info.ptr_lin)[(cnt_lin &~0x03) + i] = tmp[i]; + for (i = 0; i < (cnt_lin & 0x03); i++) { + ((uint8_t *)info.ptr_lin)[(cnt_lin & ~0x03) + i] = tmp[i]; } uint32_t wCnt = cnt_wrap; - for (; i < 4 && wCnt > 0; i++, wCnt--) - { - *(uint8_t*)info.ptr_wrap = tmp[i]; - info.ptr_wrap = (uint8_t*)info.ptr_wrap + 1; + for (; i < 4 && wCnt > 0; i++, wCnt--) { + *(uint8_t *)info.ptr_wrap = tmp[i]; + info.ptr_wrap = (uint8_t *)info.ptr_wrap + 1; } // Copy rest of wrapped byte @@ -1420,32 +1340,29 @@ static bool dcd_read_packet_memory_ff(tu_fifo_t * ff, uint16_t src, uint16_t wNB dcd_read_packet_memory(info.ptr_wrap, src, wCnt); } #else - if((cnt_lin & 0x01) && cnt_wrap) - { + if ((cnt_lin & 0x01) && cnt_wrap) { // Copy first linear part - dcd_read_packet_memory(info.ptr_lin, src, cnt_lin &~0x01); - src += cnt_lin &~0x01; + dcd_read_packet_memory(info.ptr_lin, src, cnt_lin & ~0x01); + src += cnt_lin & ~0x01; // Copy last linear byte & first wrapped byte uint8_t tmp[2]; dcd_read_packet_memory(tmp, src, 2); src += 2; - ((uint8_t*)info.ptr_lin)[cnt_lin - 1] = tmp[0]; - ((uint8_t*)info.ptr_wrap)[0] = tmp[1]; + ((uint8_t *)info.ptr_lin)[cnt_lin - 1] = tmp[0]; + ((uint8_t *)info.ptr_wrap)[0] = tmp[1]; // Copy rest of wrapped byte - dcd_read_packet_memory(((uint8_t*)info.ptr_wrap) + 1, src, cnt_wrap - 1); + dcd_read_packet_memory(((uint8_t *)info.ptr_wrap) + 1, src, cnt_wrap - 1); } #endif - else - { + else { // Copy linear part dcd_read_packet_memory(info.ptr_lin, src, cnt_lin); src += cnt_lin; - if(info.len_wrap) - { + if (info.len_wrap) { // Copy wrapped byte dcd_read_packet_memory(info.ptr_wrap, src, cnt_wrap); } -- cgit v1.3.1 From 724ef1af8d948dc65815b48564b351eeeb270f77 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 10 Apr 2024 09:58:43 +0700 Subject: set txfifo empty level to complete and change back fifo tx to normal size --- src/portable/synopsys/dwc2/dcd_dwc2.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 69d96aff0..d01d9645b 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -154,9 +154,11 @@ static bool fifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { dwc2->grxfsiz = sz; } } else { - // The fifo-empty interrupt fires when the interrupt is half empty. In order + // Note if The TXFELVL is configured as half empty. In order // to be able to write a packet at that point, the fifo must be twice the max_size. - fifo_size = fifo_size * 2; + if ((dwc2->gahbcfg & GAHBCFG_TXFELVL) == 0) { + fifo_size *= 2; + } // Check if free space is available TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size / 4); @@ -596,13 +598,13 @@ void dcd_init(uint8_t rhport) { int_mask = dwc2->gotgint; dwc2->gotgint |= int_mask; - // Configure TX FIFO to set the TX FIFO empty interrupt when half-empty - dwc2->gahbcfg &= ~GAHBCFG_TXFELVL; - // Required as part of core initialization. dwc2->gintmsk = GINTMSK_OTGINT | GINTMSK_RXFLVLM | GINTMSK_USBSUSPM | GINTMSK_USBRST | GINTMSK_ENUMDNEM | GINTMSK_WUIM; + // Configure TX FIFO empty level for interrupt. Default is complete empty + dwc2->gahbcfg |= GAHBCFG_TXFELVL; + // Enable global interrupt dwc2->gahbcfg |= GAHBCFG_GINT; -- cgit v1.3.1 From a173e6ed138cc6f696ab219913c7cf8107c2e9ed Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 10 Apr 2024 17:02:35 +0700 Subject: revert pr2245 --- src/portable/renesas/rusb2/dcd_rusb2.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'src/portable') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 24edc30e7..3ec1b70b5 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -266,14 +266,6 @@ static void pipe_read_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void tu_fifo_advance_write_pointer(f, count); } - -static bool wait_pipe_fifo_empty(rusb2_reg_t* rusb, uint8_t num) { - TU_ASSERT(num); - while( (rusb->PIPE_CTR[num-1] & RUSB2_PIPE_CTR_INBUFM_Msk) > 0 ) {} - return true; -} - - //--------------------------------------------------------------------+ // Pipe Transfer //--------------------------------------------------------------------+ @@ -347,7 +339,6 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) const unsigned rem = pipe->remaining; if (!rem) { - wait_pipe_fifo_empty(rusb, num); pipe->buf = NULL; return true; } -- cgit v1.3.1 From fb69d80e70c5a3d89606bb503622837fdf8fae4a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 10 Apr 2024 18:26:56 +0700 Subject: use for loop instead of__builtin_ctz() which is not portable (e.g with ccrx) --- src/portable/renesas/rusb2/dcd_rusb2.c | 52 ++++++++++++++-------------------- 1 file changed, 22 insertions(+), 30 deletions(-) (limited to 'src/portable') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 3ec1b70b5..0d53b7a7b 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -89,39 +89,39 @@ static dcd_data_t _dcd; // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -// Transfer conditions specifiable for each pipe: +// Transfer conditions specifiable for each pipe for most MCUs // - Pipe 0: Control transfer with 64-byte single buffer -// - Pipes 1 and 2: Bulk isochronous transfer continuous transfer mode with programmable buffer size up -// to 2 KB and optional double buffer -// - Pipes 3 to 5: Bulk transfer continuous transfer mode with programmable buffer size up to 2 KB and -// optional double buffer -// - Pipes 6 to 9: Interrupt transfer with 64-byte single buffer +// - Pipes 1 and 2: Bulk or ISO +// - Pipes 3 to 5: Bulk +// - Pipes 6 to 9: Interrupt +// +// Note: for small mcu such as +// - RA2A1: only pipe 4-7 are available, and no support for ISO + enum { - PIPE_1ST_BULK = 3, - PIPE_1ST_INTERRUPT = 6, + PIPE_LAST_ISO = 2, + PIPE_LAST_BULK = 5, + PIPE_LAST_INTERRUPT = 9, PIPE_COUNT = 10, }; -static unsigned find_pipe(unsigned xfer) -{ - switch (xfer) { +static unsigned find_pipe(unsigned xfer_type) { + switch (xfer_type) { case TUSB_XFER_ISOCHRONOUS: - for (int i = 1; i < PIPE_1ST_BULK; ++i) { + for (int i = PIPE_LAST_ISO; i > 0; i--) { if (0 == _dcd.pipe[i].ep) return i; } break; case TUSB_XFER_BULK: - for (int i = PIPE_1ST_BULK; i < PIPE_1ST_INTERRUPT; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - for (int i = 1; i < PIPE_1ST_BULK; ++i) { + // find backward since only pipe 1, 2 support ISO + for (int i = PIPE_LAST_BULK; i > 0; i--) { if (0 == _dcd.pipe[i].ep) return i; } break; case TUSB_XFER_INTERRUPT: - for (int i = PIPE_1ST_INTERRUPT; i < PIPE_COUNT; ++i) { + for(int i = PIPE_LAST_INTERRUPT; i > PIPE_LAST_BULK; i--) { if (0 == _dcd.pipe[i].ep) return i; } break; @@ -1025,20 +1025,12 @@ void dcd_int_handler(uint8_t rhport) unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ rusb->BRDYSTS = ~s; - while (s) { -#if defined(__CCRX__) - static const int Mod37BitPosition[] = { - -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, - 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, - 20, 8, 19, 18 - }; - const unsigned num = Mod37BitPosition[(-s & s) % 37]; -#else - const unsigned num = __builtin_ctz(s); -#endif - process_pipe_brdy(rhport, num); - s &= ~TU_BIT(num); + for (unsigned pipe = 0; pipe < PIPE_COUNT; ++pipe) { + if (tu_bit_test(s, pipe)) { + process_pipe_brdy(rhport, pipe); + s = tu_bit_clear(s, pipe); + } } } } -- cgit v1.3.1 From 241e436d19d5ee400decc0d6a56ed4ab2a21fa46 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 10 Apr 2024 19:17:23 +0700 Subject: support ra2a1 pipe numbering, fix ra2a1 ek led/button. Though usb not enumerated yet, probably due to bsp/clock setup --- hw/bsp/ra/boards/ra2a1_ek/board.h | 4 +- hw/bsp/ra/family.c | 3 ++ hw/bsp/ra/vector_data.h | 3 ++ src/portable/renesas/rusb2/dcd_rusb2.c | 80 +++++++++++++++------------------- 4 files changed, 42 insertions(+), 48 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h index c132387bc..1c2b666d2 100644 --- a/hw/bsp/ra/boards/ra2a1_ek/board.h +++ b/hw/bsp/ra/boards/ra2a1_ek/board.h @@ -31,10 +31,10 @@ extern "C" { #endif -#define LED1 BSP_IO_PORT_01_PIN_06 +#define LED1 BSP_IO_PORT_02_PIN_05 #define LED_STATE_ON 1 -#define SW1 BSP_IO_PORT_01_PIN_05 +#define SW1 BSP_IO_PORT_02_PIN_06 #define BUTTON_STATE_ACTIVE 0 static const ioport_pin_cfg_t board_pin_cfg[] = { diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 16332be17..db8988a36 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -64,8 +64,11 @@ BSP_DONT_REMOVE BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] = { [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */ [1] = usbfs_resume_handler, /* USBFS RESUME (USBFS resume interrupt) */ + +#ifndef BSP_MCU_GROUP_RA2A1 [2] = usbfs_d0fifo_handler, /* USBFS FIFO 0 (DMA transfer request 0) */ [3] = usbfs_d1fifo_handler, /* USBFS FIFO 1 (DMA transfer request 1) */ +#endif #ifdef BOARD_HAS_USB_HIGHSPEED [4] = usbhs_interrupt_handler, /* USBHS INT (USBHS interrupt) */ diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h index ca667faa3..2b3b7d837 100644 --- a/hw/bsp/ra/vector_data.h +++ b/hw/bsp/ra/vector_data.h @@ -9,8 +9,11 @@ extern "C" { /* ISR prototypes */ void usbfs_interrupt_handler(void); void usbfs_resume_handler(void); + +#ifndef BSP_MCU_GROUP_RA2A1 void usbfs_d0fifo_handler(void); void usbfs_d1fifo_handler(void); +#endif #ifdef BOARD_HAS_USB_HIGHSPEED void usbhs_interrupt_handler(void); diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 0d53b7a7b..0fcf1b688 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -89,6 +89,10 @@ static dcd_data_t _dcd; // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ +enum { + PIPE_COUNT = 10, +}; + // Transfer conditions specifiable for each pipe for most MCUs // - Pipe 0: Control transfer with 64-byte single buffer // - Pipes 1 and 2: Bulk or ISO @@ -97,44 +101,33 @@ static dcd_data_t _dcd; // // Note: for small mcu such as // - RA2A1: only pipe 4-7 are available, and no support for ISO - -enum { - PIPE_LAST_ISO = 2, - PIPE_LAST_BULK = 5, - PIPE_LAST_INTERRUPT = 9, - PIPE_COUNT = 10, -}; - static unsigned find_pipe(unsigned xfer_type) { - switch (xfer_type) { - case TUSB_XFER_ISOCHRONOUS: - for (int i = PIPE_LAST_ISO; i > 0; i--) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - - case TUSB_XFER_BULK: - // find backward since only pipe 1, 2 support ISO - for (int i = PIPE_LAST_BULK; i > 0; i--) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - - case TUSB_XFER_INTERRUPT: - for(int i = PIPE_LAST_INTERRUPT; i > PIPE_LAST_BULK; i--) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; + #if defined(BSP_MCU_GROUP_RA2A1) + const uint8_t pipe_idx_arr[4][2] = { + { 0, 0 }, // Control + { 0, 0 }, // Isochronous not supported + { 4, 5 }, // Bulk + { 6, 7 }, // Interrupt + }; + #else + const uint8_t pipe_idx_arr[4][2] = { + { 0, 0 }, // Control + { 1, 2 }, // Isochronous + { 1, 5 }, // Bulk + { 6, 9 }, // Interrupt + }; + #endif - default: - /* No support for control transfer */ - break; + // find backward since only pipe 1, 2 support ISO + const uint8_t* idx = pipe_idx_arr[xfer_type]; + for (int i = idx[1]; i >= idx[0]; i--) { + if (0 == _dcd.pipe[i].ep) return i; } + return 0; } -static volatile uint16_t* get_pipectr(rusb2_reg_t *rusb, unsigned num) -{ +static volatile uint16_t* get_pipectr(rusb2_reg_t *rusb, unsigned num) { if (num) { return (volatile uint16_t*)&(rusb->PIPE_CTR[num - 1]); } else { @@ -142,8 +135,7 @@ static volatile uint16_t* get_pipectr(rusb2_reg_t *rusb, unsigned num) } } -static volatile reg_pipetre_t* get_pipetre(rusb2_reg_t *rusb, unsigned num) -{ +static volatile reg_pipetre_t* get_pipetre(rusb2_reg_t *rusb, unsigned num) { volatile reg_pipetre_t* tre = NULL; if ((1 <= num) && (num <= 5)) { tre = (volatile reg_pipetre_t*)&(rusb->PIPE_TR[num - 1].E); @@ -151,8 +143,7 @@ static volatile reg_pipetre_t* get_pipetre(rusb2_reg_t *rusb, unsigned num) return tre; } -static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr) -{ +static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr) { rusb2_reg_t *rusb = RUSB2_REG(rhport); const unsigned epn = tu_edpt_number(ep_addr); @@ -165,19 +156,16 @@ static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr) } } -static uint16_t edpt0_max_packet_size(rusb2_reg_t* rusb) -{ +static uint16_t edpt0_max_packet_size(rusb2_reg_t* rusb) { return rusb->DCPMAXP_b.MXPS; } -static uint16_t edpt_max_packet_size(rusb2_reg_t *rusb, unsigned num) -{ +static uint16_t edpt_max_packet_size(rusb2_reg_t *rusb, unsigned num) { rusb->PIPESEL = num; return rusb->PIPEMAXP; } -static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) -{ +static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) { while ( rusb->D0FIFOSEL_b.CURPIPE != num ) {} while ( !rusb->D0FIFOCTR_b.FRDY ) {} } @@ -1026,10 +1014,10 @@ void dcd_int_handler(uint8_t rhport) /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ rusb->BRDYSTS = ~s; - for (unsigned pipe = 0; pipe < PIPE_COUNT; ++pipe) { - if (tu_bit_test(s, pipe)) { - process_pipe_brdy(rhport, pipe); - s = tu_bit_clear(s, pipe); + for (unsigned p = 0; p < PIPE_COUNT; ++p) { + if (tu_bit_test(s, p)) { + process_pipe_brdy(rhport, p); + s = tu_bit_clear(s, p); } } } -- cgit v1.3.1 From daf1c7303ce390407ab876a5230bc2520cbfd573 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 10 Apr 2024 20:09:11 +0700 Subject: fix mask typo for brdysts when using pipe9 --- src/portable/renesas/rusb2/dcd_rusb2.c | 37 +++++++++++++--------------------- 1 file changed, 14 insertions(+), 23 deletions(-) (limited to 'src/portable') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 0fcf1b688..a65d056cf 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -57,29 +57,22 @@ //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ +enum { + PIPE_COUNT = 10, +}; -/* Start of definition of packed structs (used by the CCRX toolchain) */ -TU_ATTR_PACKED_BEGIN -TU_ATTR_BIT_FIELD_ORDER_BEGIN - -typedef struct TU_ATTR_PACKED -{ +typedef struct { void *buf; /* the start address of a transfer data buffer */ uint16_t length; /* the number of bytes in the buffer */ uint16_t remaining; /* the number of bytes remaining in the buffer */ - struct { - uint32_t ep : 8; /* an assigned endpoint address */ - uint32_t ff : 1; /* `buf` is TU_FUFO or POD */ - uint32_t : 0; - }; -} pipe_state_t; -TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) -TU_ATTR_BIT_FIELD_ORDER_END + uint8_t ep; /* an assigned endpoint address */ + uint8_t ff; /* `buf` is TU_FUFO or POD */ +} pipe_state_t; typedef struct { - pipe_state_t pipe[10]; + pipe_state_t pipe[PIPE_COUNT]; uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */ } dcd_data_t; @@ -89,9 +82,6 @@ static dcd_data_t _dcd; // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -enum { - PIPE_COUNT = 10, -}; // Transfer conditions specifiable for each pipe for most MCUs // - Pipe 0: Control transfer with 64-byte single buffer @@ -119,8 +109,10 @@ static unsigned find_pipe(unsigned xfer_type) { #endif // find backward since only pipe 1, 2 support ISO - const uint8_t* idx = pipe_idx_arr[xfer_type]; - for (int i = idx[1]; i >= idx[0]; i--) { + const uint8_t idx_first = pipe_idx_arr[xfer_type][0]; + const uint8_t idx_last = pipe_idx_arr[xfer_type][1]; + + for (int i = idx_last; i >= idx_first; i--) { if (0 == _dcd.pipe[i].ep) return i; } @@ -823,7 +815,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) } rusb->PIPECFG = cfg; - rusb->BRDYSTS = 0x1FFu ^ TU_BIT(num); + rusb->BRDYSTS = 0x3FFu ^ TU_BIT(num); rusb->BRDYENB |= TU_BIT(num); if (dir || (xfer != TUSB_XFER_BULK)) { @@ -1010,14 +1002,13 @@ void dcd_int_handler(uint8_t rhport) // Buffer ready if ( is0 & RUSB2_INTSTS0_BRDY_Msk ) { const unsigned m = rusb->BRDYENB; - unsigned s = rusb->BRDYSTS & m; + const unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ rusb->BRDYSTS = ~s; for (unsigned p = 0; p < PIPE_COUNT; ++p) { if (tu_bit_test(s, p)) { process_pipe_brdy(rhport, p); - s = tu_bit_clear(s, p); } } } -- cgit v1.3.1 From 03cfe90f3ef44c2f4e46509701dfbad5af9991e5 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 10 Apr 2024 22:21:53 +0200 Subject: flush fifo in dcd_edpt_close_all() --- src/portable/synopsys/dwc2/dcd_dwc2.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index d01d9645b..40e59136d 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -101,6 +101,19 @@ static uint16_t _allocated_fifo_words_tx; // TX FIFO size in words (IN EPs) // SOF enabling flag - required for SOF to not get disabled in ISR when SOF was enabled by static bool _sof_en; +static inline void fifo_flush(uint8_t rhport) +{ + dwc2_regs_t* dwc2 = DWC2_REG(rhport); + + // flush all TX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_TXFFLSH | (0x10u << GRSTCTL_TXFNUM_Pos); + while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} + + // flush RX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_RXFFLSH; + while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} +} + // Calculate the RX FIFO size according to minimum recommendations from reference manual // RxFIFO = (5 * number of control endpoints + 8) + // ((largest USB packet used / 4) + 1 for status information) + @@ -270,13 +283,7 @@ static void bus_reset(uint8_t rhport) { dwc2->epout[n].doepctl |= DOEPCTL_SNAK; } - // flush all TX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_TXFFLSH | (0x10u << GRSTCTL_TXFNUM_Pos); - while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} - - // flush RX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_RXFFLSH; - while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} + fifo_flush(rhport); // 2. Set up interrupt mask dwc2->daintmsk = TU_BIT(DAINTMSK_OEPM_Pos) | TU_BIT(DAINTMSK_IEPM_Pos); @@ -584,13 +591,7 @@ void dcd_init(uint8_t rhport) { // (non zero-length packet), send STALL back and discard. dwc2->dcfg |= DCFG_NZLSOHSK; - // flush all TX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_TXFFLSH | (0x10u << GRSTCTL_TXFNUM_Pos); - while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} - - // flush RX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_RXFFLSH; - while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} + fifo_flush(rhport); // Clear all interrupts uint32_t int_mask = dwc2->gintsts; @@ -708,8 +709,12 @@ void dcd_edpt_close_all(uint8_t rhport) { xfer_status[n][TUSB_DIR_IN].max_size = 0; } + // reset allocated fifo OUT + dwc2->grxfsiz = calc_grxfsiz(64, ep_count); // reset allocated fifo IN _allocated_fifo_words_tx = 16; + + fifo_flush(rhport); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { -- cgit v1.3.1 From 79cbe93fcff83a5764acd2427af410b896434d5f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 11 Apr 2024 11:02:54 +0700 Subject: separate flush tx/rx fifo --- src/portable/synopsys/dwc2/dcd_dwc2.c | 36 +++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 40e59136d..830a1ccd0 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -101,19 +101,6 @@ static uint16_t _allocated_fifo_words_tx; // TX FIFO size in words (IN EPs) // SOF enabling flag - required for SOF to not get disabled in ISR when SOF was enabled by static bool _sof_en; -static inline void fifo_flush(uint8_t rhport) -{ - dwc2_regs_t* dwc2 = DWC2_REG(rhport); - - // flush all TX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_TXFFLSH | (0x10u << GRSTCTL_TXFNUM_Pos); - while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} - - // flush RX fifo and wait for it cleared - dwc2->grstctl = GRSTCTL_RXFFLSH; - while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} -} - // Calculate the RX FIFO size according to minimum recommendations from reference manual // RxFIFO = (5 * number of control endpoints + 8) + // ((largest USB packet used / 4) + 1 for status information) + @@ -125,6 +112,17 @@ static inline uint16_t calc_grxfsiz(uint16_t max_ep_size, uint8_t ep_count) { return 15 + 2 * (max_ep_size / 4) + 2 * ep_count; } +TU_ATTR_ALWAYS_INLINE static inline void fifo_flush_tx(dwc2_regs_t* dwc2, uint8_t epnum) { + // flush TX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_TXFFLSH | (epnum << GRSTCTL_TXFNUM_Pos); + while (dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) {} +} +TU_ATTR_ALWAYS_INLINE static inline void fifo_flush_rx(dwc2_regs_t* dwc2) { + // flush RX fifo and wait for it cleared + dwc2->grstctl = GRSTCTL_RXFFLSH; + while (dwc2->grstctl & GRSTCTL_RXFFLSH_Msk) {} +} + static bool fifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; @@ -238,8 +236,7 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { } // Flush the FIFO, and wait until we have confirmed it cleared. - dwc2->grstctl = ((epnum << GRSTCTL_TXFNUM_Pos) | GRSTCTL_TXFFLSH); - while ((dwc2->grstctl & GRSTCTL_TXFFLSH_Msk) != 0) {} + fifo_flush_tx(dwc2, epnum); } else { dwc2_epout_t* epout = dwc2->epout; @@ -283,7 +280,8 @@ static void bus_reset(uint8_t rhport) { dwc2->epout[n].doepctl |= DOEPCTL_SNAK; } - fifo_flush(rhport); + fifo_flush_tx(dwc2, 0x10); // all tx fifo + fifo_flush_rx(dwc2); // 2. Set up interrupt mask dwc2->daintmsk = TU_BIT(DAINTMSK_OEPM_Pos) | TU_BIT(DAINTMSK_IEPM_Pos); @@ -591,7 +589,8 @@ void dcd_init(uint8_t rhport) { // (non zero-length packet), send STALL back and discard. dwc2->dcfg |= DCFG_NZLSOHSK; - fifo_flush(rhport); + fifo_flush_tx(dwc2, 0x10); // all tx fifo + fifo_flush_rx(dwc2); // Clear all interrupts uint32_t int_mask = dwc2->gintsts; @@ -714,7 +713,8 @@ void dcd_edpt_close_all(uint8_t rhport) { // reset allocated fifo IN _allocated_fifo_words_tx = 16; - fifo_flush(rhport); + fifo_flush_tx(dwc2, 0x10); // all tx fifo + fifo_flush_rx(dwc2); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { -- cgit v1.3.1 From b992b6d7a6f90cd96f7d53383755dc17e393f00e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 11 Apr 2024 12:06:13 +0700 Subject: apply find_pipe() and forloop for hcd --- src/portable/renesas/rusb2/dcd_rusb2.c | 1 - src/portable/renesas/rusb2/hcd_rusb2.c | 75 +++++++++++++--------------------- 2 files changed, 29 insertions(+), 47 deletions(-) (limited to 'src/portable') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index a65d056cf..f9523191a 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -1005,7 +1005,6 @@ void dcd_int_handler(uint8_t rhport) const unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ rusb->BRDYSTS = ~s; - for (unsigned p = 0; p < PIPE_COUNT; ++p) { if (tu_bit_test(s, p)) { process_pipe_brdy(rhport, p); diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index bf95be707..1356b696f 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -45,6 +45,9 @@ //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ +enum { + PIPE_COUNT = 10, +}; TU_ATTR_PACKED_BEGIN TU_ATTR_BIT_FIELD_ORDER_BEGIN @@ -75,7 +78,7 @@ TU_ATTR_BIT_FIELD_ORDER_END typedef struct { bool need_reset; /* The device has not been reset after connection. */ - pipe_state_t pipe[10]; + pipe_state_t pipe[PIPE_COUNT]; uint8_t ep[4][2][15]; /* a lookup table for a pipe index from an endpoint address */ uint8_t ctl_mps[5]; /* EP0 max packet size for each device */ } hcd_data_t; @@ -86,46 +89,30 @@ typedef struct static hcd_data_t _hcd; // TODO merged with DCD -// Transfer conditions specifiable for each pipe: +// Transfer conditions specifiable for each pipe for most MCUs // - Pipe 0: Control transfer with 64-byte single buffer -// - Pipes 1 and 2: Bulk isochronous transfer continuous transfer mode with programmable buffer size up -// to 2 KB and optional double buffer -// - Pipes 3 to 5: Bulk transfer continuous transfer mode with programmable buffer size up to 2 KB and -// optional double buffer -// - Pipes 6 to 9: Interrupt transfer with 64-byte single buffer -enum { - PIPE_1ST_BULK = 3, - PIPE_1ST_INTERRUPT = 6, - PIPE_COUNT = 10, -}; - -static unsigned find_pipe(unsigned xfer) { - switch ( xfer ) { - case TUSB_XFER_ISOCHRONOUS: - for (int i = 1; i < PIPE_1ST_BULK; ++i) { - if ( 0 == _hcd.pipe[i].ep ) return i; - } - break; - - case TUSB_XFER_BULK: - for (int i = PIPE_1ST_BULK; i < PIPE_1ST_INTERRUPT; ++i) { - if ( 0 == _hcd.pipe[i].ep ) return i; - } - for (int i = 1; i < PIPE_1ST_BULK; ++i) { - if ( 0 == _hcd.pipe[i].ep ) return i; - } - break; +// - Pipes 1 and 2: Bulk or ISO +// - Pipes 3 to 5: Bulk +// - Pipes 6 to 9: Interrupt +// +// Note: for small mcu such as +// - RA2A1: only pipe 4-7 are available, and no support for ISO +static unsigned find_pipe(unsigned xfer_type) { + const uint8_t pipe_idx_arr[4][2] = { + { 0, 0 }, // Control + { 1, 2 }, // Isochronous + { 1, 5 }, // Bulk + { 6, 9 }, // Interrupt + }; - case TUSB_XFER_INTERRUPT: - for (int i = PIPE_1ST_INTERRUPT; i < PIPE_COUNT; ++i) { - if ( 0 == _hcd.pipe[i].ep ) return i; - } - break; + // find backward since only pipe 1, 2 support ISO + const uint8_t idx_first = pipe_idx_arr[xfer_type][0]; + const uint8_t idx_last = pipe_idx_arr[xfer_type][1]; - default: - /* No support for control transfer */ - break; + for (int i = idx_last; i >= idx_first; i--) { + if (0 == _hcd.pipe[i].ep) return i; } + return 0; } @@ -718,7 +705,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const } rusb->PIPECFG = cfg; - rusb->BRDYSTS = 0x1FFu ^ TU_BIT(num); + rusb->BRDYSTS = 0x3FFu ^ TU_BIT(num); rusb->NRDYENB |= TU_BIT(num); rusb->BRDYENB |= TU_BIT(num); @@ -846,14 +833,10 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ rusb->BRDYSTS = ~s; - while (s) { -#if defined(__CCRX__) - const unsigned num = Mod37BitPosition[(-s & s) % 37]; -#else - const unsigned num = __builtin_ctz(s); -#endif - process_pipe_brdy(rhport, num); - s &= ~TU_BIT(num); + for (unsigned p = 0; p < PIPE_COUNT; ++p) { + if (tu_bit_test(s, p)) { + process_pipe_brdy(rhport, p); + } } } } -- cgit v1.3.1 From 535571c3d278efbbeebdc531c36ce1f492ea4d05 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 11 Apr 2024 19:25:02 +0700 Subject: - remove redundant call of pcd_set_ep_rx_cnt() - minor code format --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 155 +++++++++++++------------- 1 file changed, 75 insertions(+), 80 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index c11a8c625..56c9bc84b 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -216,22 +216,19 @@ void dcd_init(uint8_t rhport) /* The RM mentions to use a special ordering of PDWN and FRES, but this isn't done in HAL. * Here, the RM is followed. */ - for (uint32_t i = 0; i < 200; i++) // should be a few us - { + for (uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); } // Perform USB peripheral reset USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; - for (uint32_t i = 0; i < 200; i++) // should be a few us - { + for (uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); } USB->CNTR &= ~USB_CNTR_PDWN; // Wait startup time, for F042 and F070, this is <= 1 us. - for (uint32_t i = 0; i < 200; i++) // should be a few us - { + for (uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); } USB->CNTR = 0; // Enable USB @@ -251,8 +248,9 @@ void dcd_init(uint8_t rhport) dcd_handle_bus_reset(); // Enable pull-up if supported - if (dcd_connect) + if (dcd_connect) { dcd_connect(rhport); + } } // Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. @@ -441,21 +439,23 @@ void dcd_remote_wakeup(uint8_t rhport) remoteWakeCountdown = 4u; // required to be 1 to 15 ms, ESOF should trigger every 1ms. } -static const tusb_desc_endpoint_t ep0OUT_desc = {.bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, - - .bEndpointAddress = 0x00, - .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0}; - -static const tusb_desc_endpoint_t ep0IN_desc = {.bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, - - .bEndpointAddress = 0x80, - .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0}; +static const tusb_desc_endpoint_t ep0OUT_desc = { + .bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, + .bEndpointAddress = 0x00, + .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, + .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, + .bInterval = 0 +}; + +static const tusb_desc_endpoint_t ep0IN_desc = { + .bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, + .bEndpointAddress = 0x80, + .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, + .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, + .bInterval = 0 +}; static void dcd_handle_bus_reset(void) { @@ -503,8 +503,9 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); /* Ignore spurious int */ - if (xfer->in_complete) + if (xfer->in_complete) { return; + } xfer->in_complete = true; if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { @@ -515,11 +516,9 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) } } - if ((xfer->total_len != xfer->queued_len)) /* TX not complete */ - { + if ((xfer->total_len != xfer->queued_len)) { dcd_transmit_packet(xfer, EPindex); - } else /* TX Complete */ - { + } else { dcd_event_xfer_complete(0, ep_addr, xfer->total_len, XFER_RESULT_SUCCESS, true); } } @@ -561,12 +560,11 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) return; } - if ((ep_addr == 0U) && ((wEPRegVal & USB_EP_SETUP) != 0U)) /* Setup packet */ - { + if ((ep_addr == 0U) && ((wEPRegVal & USB_EP_SETUP) != 0U)) { + /* Setup packet */ uint32_t count = pcd_get_ep_rx_cnt(USB, EPindex); - /* Get SETUP Packet*/ - if (count == 8) // Setup packet should always be 8 bytes. If not, ignore it, and try again. - { + // Setup packet should always be 8 bytes. If not, ignore it, and try again. + if (count == 8) { // Must reset EP to NAK (in case it had been stalling) (though, maybe too late here) pcd_set_ep_rx_status(USB, 0u, USB_EP_RX_NAK); pcd_set_ep_tx_status(USB, 0u, USB_EP_TX_NAK); @@ -615,16 +613,14 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) } if ((count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len)) { - /* RX COMPLETE */ + // all bytes received or short packet dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); - // Though the host could still send, we don't know. - // Does the bulk pipe need to be reset to valid to allow for a ZLP? } else { /* Set endpoint active again for receiving more data. * Note that isochronous endpoints stay active always */ - if (!((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS)) { + if ((wEPRegVal & USB_EP_TYPE_MASK) != USB_EP_ISOCHRONOUS) { uint16_t remaining = xfer->total_len - xfer->queued_len; - uint16_t cnt = remaining >= xfer->max_packet_size ? xfer->max_packet_size : remaining; + uint16_t cnt = tu_min16(remaining, xfer->max_packet_size); pcd_set_ep_rx_cnt(USB, EPindex, cnt); pcd_set_ep_rx_cnt(USB, EPindex, remaining); } @@ -734,7 +730,9 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *req { (void)rhport; - if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && request->bRequest == TUSB_REQ_SET_ADDRESS) { + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && + request->bRequest == TUSB_REQ_SET_ADDRESS) { uint8_t const dev_addr = (uint8_t)request->wValue; // Setting new address after the whole request is complete @@ -781,13 +779,16 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) for (uint8_t i = 0; i < STFSDEV_EP_COUNT; i++) { // Check if already allocated - if (ep_alloc_status[i].allocated[dir] && ep_alloc_status[i].ep_type == ep_type && ep_alloc_status[i].ep_num == epnum) { + if (ep_alloc_status[i].allocated[dir] && + ep_alloc_status[i].ep_type == ep_type && + ep_alloc_status[i].ep_num == epnum) { return i; } // If EP of current direction is not allocated // Except for ISO endpoint, both direction should be free - if (!ep_alloc_status[i].allocated[dir] && (ep_type != TUSB_XFER_ISOCHRONOUS || !ep_alloc_status[i].allocated[dir ^ 1])) { + if (!ep_alloc_status[i].allocated[dir] && + (ep_type != TUSB_XFER_ISOCHRONOUS || !ep_alloc_status[i].allocated[dir ^ 1])) { // Check if EP number is the same if (ep_alloc_status[i].ep_num == 0xFF || ep_alloc_status[i].ep_num == epnum) { // One EP pair has to be the same type @@ -812,8 +813,9 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) { (void)rhport; - uint8_t const ep_idx = dcd_ep_alloc(p_endpoint_desc->bEndpointAddress, p_endpoint_desc->bmAttributes.xfer); - uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); + uint8_t const ep_addr = p_endpoint_desc->bEndpointAddress; + uint8_t const ep_idx = dcd_ep_alloc(ep_addr, p_endpoint_desc->bmAttributes.xfer); + uint8_t const dir = tu_edpt_dir(ep_addr); const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); const uint16_t buffer_size = pcd_aligned_buffer_size(packet_size); uint16_t pma_addr; @@ -822,28 +824,26 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) TU_ASSERT(ep_idx < STFSDEV_EP_COUNT); TU_ASSERT(buffer_size <= 64); - // ISO endpoint should use alloc / active functions - TU_ASSERT(p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS); - // Set type switch (p_endpoint_desc->bmAttributes.xfer) { - case TUSB_XFER_CONTROL: - wType = USB_EP_CONTROL; - break; - case TUSB_XFER_BULK: - wType = USB_EP_CONTROL; - break; - - case TUSB_XFER_INTERRUPT: - wType = USB_EP_INTERRUPT; - break; - - default: - TU_ASSERT(false); + case TUSB_XFER_CONTROL: + wType = USB_EP_CONTROL; + break; + case TUSB_XFER_BULK: + wType = USB_EP_CONTROL; + break; + + case TUSB_XFER_INTERRUPT: + wType = USB_EP_INTERRUPT; + break; + + default: + // Note: ISO endpoint should use alloc / active functions + TU_ASSERT(false); } pcd_set_eptype(USB, ep_idx, wType); - pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); + pcd_set_ep_address(USB, ep_idx, tu_edpt_number(ep_addr)); /* Create a packet memory buffer area. */ pma_addr = dcd_pma_alloc(buffer_size, false); @@ -852,16 +852,14 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) pcd_set_ep_tx_address(USB, ep_idx, pma_addr); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); pcd_clear_tx_dtog(USB, ep_idx); - } - - if (dir == TUSB_DIR_OUT) { + } else { pcd_set_ep_rx_address(USB, ep_idx, pma_addr); pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); pcd_clear_rx_dtog(USB, ep_idx); } - xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->max_packet_size = packet_size; - xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->ep_idx = ep_idx; + xfer_ctl_ptr(ep_addr)->max_packet_size = packet_size; + xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; return true; } @@ -898,8 +896,6 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet { (void)rhport; - TU_ASSERT(largest_packet_size < 1024); - uint8_t const ep_idx = dcd_ep_alloc(ep_addr, TUSB_XFER_ISOCHRONOUS); const uint16_t buffer_size = pcd_aligned_buffer_size(largest_packet_size); @@ -925,14 +921,15 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) { (void)rhport; - uint8_t const ep_idx = xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->ep_idx; - uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); + uint8_t const ep_addr = p_endpoint_desc->bEndpointAddress; + uint8_t const ep_idx = xfer_ctl_ptr(ep_addr)->ep_idx; + uint8_t const dir = tu_edpt_dir(ep_addr); const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); - pcd_set_ep_address(USB, ep_idx, tu_edpt_number(p_endpoint_desc->bEndpointAddress)); + pcd_set_ep_address(USB, ep_idx, tu_edpt_number(ep_addr)); pcd_clear_tx_dtog(USB, ep_idx); pcd_clear_rx_dtog(USB, ep_idx); @@ -943,7 +940,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoin pcd_tx_dtog(USB, ep_idx); } - xfer_ctl_ptr(p_endpoint_desc->bEndpointAddress)->max_packet_size = packet_size; + xfer_ctl_ptr(ep_addr)->max_packet_size = packet_size; return true; } @@ -953,9 +950,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoin static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t len = (uint16_t)(xfer->total_len - xfer->queued_len); - - if (len > xfer->max_packet_size) // max packet size for FS transfer - { + if (len > xfer->max_packet_size) { len = xfer->max_packet_size; } @@ -996,14 +991,16 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_OUT) { + if (dir == TUSB_DIR_IN) { + dcd_transmit_packet(xfer, ep_idx); + } else { // A setup token can occur immediately after an OUT STATUS packet so make sure we have a valid // buffer for the control endpoint. if (ep_idx == 0 && xfer->buffer == NULL) { xfer->buffer = (uint8_t *)_setup_packet; } - uint32_t cnt = xfer->total_len > xfer->max_packet_size ? xfer->max_packet_size : xfer->total_len; + uint32_t cnt = (uint32_t ) tu_min16(xfer->total_len, xfer->max_packet_size); uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx); if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { @@ -1014,10 +1011,8 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) } pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_VALID); - } else // IN - { - dcd_transmit_packet(xfer, ep_idx); } + return true; } @@ -1052,9 +1047,9 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_IN) { // IN + if (dir == TUSB_DIR_IN) { pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_STALL); - } else { // OUT + } else { pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_STALL); } } -- cgit v1.3.1 From 0f775630c7468b804fad7e3350b37430b6fb0a2d Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 11 Apr 2024 20:53:44 +0700 Subject: rename, invert logic for iso_in_sending. Also limit its usage to ISO endpoint --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 56c9bc84b..493e634c7 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -152,7 +152,7 @@ typedef struct { uint16_t queued_len; uint16_t max_packet_size; uint8_t ep_idx; // index for USB_EPnR register - bool in_complete; // Workaround for ISO IN EP doesn't have interrupt mask + bool iso_in_sending; // Workaround for ISO IN EP doesn't have interrupt mask } xfer_ctl_t; // EP allocator @@ -502,13 +502,15 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); - /* Ignore spurious int */ - if (xfer->in_complete) { - return; - } - xfer->in_complete = true; - if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + // Ignore spurious interrupts that we don't schedule + // host can send IN token while there is no data to send, since ISO does not have NAK + // this will result to zero length packet --> trigger interrupt (which cannot be masked) + if (!xfer->iso_in_sending) { + return; + } + xfer->iso_in_sending = false; + if (wEPRegVal & USB_EP_DTOG_TX) { pcd_set_ep_tx_dbuf0_cnt(USB, EPindex, 0); } else { @@ -955,9 +957,10 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) } uint16_t ep_reg = pcd_get_endpoint(USB, ep_ix); + bool const is_iso = (ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; uint16_t addr_ptr; - if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + if (is_iso) { if (ep_reg & USB_EP_DTOG_TX) { addr_ptr = pcd_get_ep_dbuf1_address(USB, ep_ix); pcd_set_ep_tx_dbuf1_cnt(USB, ep_ix, len); @@ -979,7 +982,9 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) dcd_int_disable(0); pcd_set_ep_tx_status(USB, ep_ix, USB_EP_TX_VALID); - xfer->in_complete = false; + if (is_iso) { + xfer->iso_in_sending = true; + } dcd_int_enable(0); } -- cgit v1.3.1 From 0ce2452a088bd7f1397a8f55d736e4e0100cb32f Mon Sep 17 00:00:00 2001 From: Clifroy Henry Date: Fri, 30 Dec 2022 19:21:53 -0500 Subject: Add non-bus-powered MSP430 re-enumeration support. --- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 80 ++++++++++++++++++++++++++--- 1 file changed, 74 insertions(+), 6 deletions(-) (limited to 'src/portable') diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index b4dfda575..60aa23b98 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -131,11 +131,17 @@ void dcd_init (uint8_t rhport) USBVECINT = 0; - // Enable reset and wait for it before continuing. - USBIE |= RSTRIE; - - // Enable pullup. - USBCNF |= PUR_EN; + if(USBPWRCTL & USBBGVBV) // Bus power detected? + { + USBPWRCTL |= VBOFFIE; // Enable bus-power-removed interrupt. + USBIE |= RSTRIE; // Enable reset and wait for it before continuing. + USBCNF |= PUR_EN; // Enable pullup. + } + else + { + USBPWRCTL |= VBONIE; // Enable bus-power-applied interrupt. + USBCNF &= ~USB_EN; // Disable USB module until bus power is detected. + } USBKEYPID = 0; } @@ -618,6 +624,48 @@ static void handle_setup_packet(void) dcd_event_setup_received(0, (uint8_t*) &_setup_packet[0], true); } +static void handle_bus_power_event(void *param) +{ + (void) param; + + osal_task_delay(2); // Bus power settling delay. + + USBKEYPID = USBKEY; + + if(USBPWRCTL & USBBGVBV) // Event caused by application of bus power. + { + USBPWRCTL |= VBOFFIE; // Enable bus-power-removed interrupt. + USBPLLDIVB = USBPLLDIVB; // For some reason the PLL will *NOT* lock unless the divider + // register is re-written. The assumption here is that this + // register was already properly configured during board-level + // initialization. + USBPLLCTL |= (UPLLEN | UPFDEN); // Enable the PLL. + + uint16_t attempts = 0; + + do // Poll the PLL to check for a successful lock. + { + USBPLLIR = 0; + osal_task_delay(1); + attempts++; + } while ((attempts < 10) && (USBPLLIR != 0)); + + if(!USBPLLIR) // A successful lock is indicated by all PLL-related interrupt + { // flags being cleared. + dcd_init(0); // Re-initialize the USB module. + } + } + else // Event caused by removal of bus power. + { + USBPWRCTL |= VBONIE; // Enable bus-power-applied interrupt. + USBPLLCTL &= ~(UPLLEN | UPFDEN); // Disable the PLL. + USBCNF = 0; // Disable the USB module. + dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, false); + } + + USBKEYPID = 0; +} + void dcd_int_handler(uint8_t rhport) { (void) rhport; @@ -646,11 +694,32 @@ void dcd_int_handler(uint8_t rhport) switch(curr_vector) { + case USBVECINT_NONE: + break; + case USBVECINT_RSTR: bus_reset(); dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); break; + case USBVECINT_PWR_VBUSOn: + case USBVECINT_PWR_VBUSOff: + USBKEYPID = USBKEY; + // Prevent (possibly) unstable power from generating spurious interrupts. + USBPWRCTL &= ~(VBONIE | VBOFFIE); + USBKEYPID = 0; + + { + dcd_event_t event; + + event.rhport = 0; + event.event_id = USBD_EVENT_FUNC_CALL; + event.func_call.func = handle_bus_power_event; + + dcd_event_handler(&event, true); + } + break; + // Clear the (hardware-enforced) NAK on EP 0 after a SETUP packet // is received. At this point, even though the hardware is no longer // forcing NAKs, the EP0 NAK bits should still be set to avoid @@ -710,7 +779,6 @@ void dcd_int_handler(uint8_t rhport) default: while(true); - break; } } -- cgit v1.3.1 From 87905d30ab8c94999bd69d0ae32f91ebdfef39d3 Mon Sep 17 00:00:00 2001 From: Clifroy Henry Date: Tue, 3 Jan 2023 10:33:49 -0500 Subject: Increase bus powe stabilization delay. --- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 60aa23b98..c1bef86fa 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -628,7 +628,7 @@ static void handle_bus_power_event(void *param) { (void) param; - osal_task_delay(2); // Bus power settling delay. + osal_task_delay(5); // Bus power settling delay. USBKEYPID = USBKEY; -- cgit v1.3.1 From 5a9b3eab6f3aa5e9fc71b902bfdbfef1acb29b44 Mon Sep 17 00:00:00 2001 From: Clifroy Henry Date: Tue, 3 Jan 2023 11:58:22 -0500 Subject: Resolve erroneous data on enumeration. --- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'src/portable') diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index c1bef86fa..46b7d6458 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -616,11 +616,20 @@ static void handle_setup_packet(void) _setup_packet[i] = setup_buf[i]; } - // Clearing SETUPIFG by reading USBVECINT does not set NAK, so now that we - // have a SETUP packet, force NAKs until tinyusb can handle the SETUP - // packet and prepare for a new xfer. + // Force NAKs until tinyusb can handle the SETUP packet and prepare + // for a new xfer. USBIEPCNT_0 |= NAK; USBOEPCNT_0 |= NAK; + + // Clear SETUPIFG to avoid handling in the USBVECINT switch statement. + // When handled there the NAKs applied to the endpoints above are + // cleared by hardware and the host will receive stale/duplicate data. + // + // Excerpt from MSP430x5xx and MSP430x6xx Family User's Guide: + // + // "...the SETUPIFG is cleared upon reading USBIV. In addition, the NAK on + // input endpoint 0 and output endpoint 0 is also cleared." + USBIFG &= ~SETUPIFG; dcd_event_setup_received(0, (uint8_t*) &_setup_packet[0], true); } -- cgit v1.3.1 From b8b22b929e1bbbbae7c7337972129ae6f7192bc6 Mon Sep 17 00:00:00 2001 From: Clifroy Henry Date: Tue, 3 Jan 2023 15:56:14 -0500 Subject: Allow re-enumeration on host power cycle. --- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 46b7d6458..a0d9b3ea5 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -94,7 +94,12 @@ static void bus_reset(void) USBOEPCNT_0 &= ~NAK; USBIEPCNT_0 &= ~NAK; - USBCTL |= FEN; // Enable responding to packets. + // Disable (subsequent) bus reset events from causing a functional + // reset of the USB module. + USBCTL &= ~FRSTE; + + // Enable responding to packets. + USBCTL |= FEN; // Dedicated buffers in hardware for SETUP and EP0, no setup needed. // Now safe to respond to SETUP packets. @@ -334,6 +339,10 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t if(epnum == 0) { + // Enables a bus reset to cause a functional reset of the USB + // module. + USBCTL |= FRSTE; + if(dir == TUSB_DIR_OUT) { // Interrupt will notify us when data was received. -- cgit v1.3.1 From a3286932add7c8142b94160522f19e5544e27c0a Mon Sep 17 00:00:00 2001 From: Clifroy Henry Date: Sat, 8 Jul 2023 17:21:19 -0400 Subject: Correctly implementing recommended workarounds for erratas USB4 and USB10. --- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 40 ++++++++++++++++++++++------- 1 file changed, 31 insertions(+), 9 deletions(-) (limited to 'src/portable') diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index a0d9b3ea5..25c2fb301 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -94,10 +94,6 @@ static void bus_reset(void) USBOEPCNT_0 &= ~NAK; USBIEPCNT_0 &= ~NAK; - // Disable (subsequent) bus reset events from causing a functional - // reset of the USB module. - USBCTL &= ~FRSTE; - // Enable responding to packets. USBCTL |= FEN; @@ -108,6 +104,28 @@ static void bus_reset(void) USBKEYPID = 0; } +// Controls reset behavior of the USB module on receipt of a bus reset event. +// - enable: When true, bus reset events will cause a reset the USB module. +static void enable_functional_reset(const bool enable) +{ + // Check whether or not the USB configuration registers were + // locked prior to this function being called so that, if + // necessary, the lock state can be restored on exit. + bool unlocked = (USBKEYPID == 0xA528) ? true : false; + + if(!unlocked) USBKEYPID = USBKEY; + + if(enable) + { + USBCTL |= FRSTE; + } + else + { + USBCTL &= ~FRSTE; + } + + if(!unlocked) USBKEYPID = 0; +} /*------------------------------------------------------------------*/ /* Controller API @@ -339,10 +357,6 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t if(epnum == 0) { - // Enables a bus reset to cause a functional reset of the USB - // module. - USBCTL |= FRSTE; - if(dir == TUSB_DIR_OUT) { // Interrupt will notify us when data was received. @@ -638,7 +652,11 @@ static void handle_setup_packet(void) // // "...the SETUPIFG is cleared upon reading USBIV. In addition, the NAK on // input endpoint 0 and output endpoint 0 is also cleared." + USBIEPCNF_0 &= ~UBME; // Errata USB10 workaround. + USBOEPCNF_0 &= ~UBME; // Errata USB10 workaround. USBIFG &= ~SETUPIFG; + USBIEPCNF_0 |= UBME; // Errata USB10 workaround. + USBOEPCNF_0 |= UBME; // Errata USB10 workaround. dcd_event_setup_received(0, (uint8_t*) &_setup_packet[0], true); } @@ -661,7 +679,7 @@ static void handle_bus_power_event(void *param) uint16_t attempts = 0; - do // Poll the PLL to check for a successful lock. + do // Poll the PLL, checking for a successful lock. { USBPLLIR = 0; osal_task_delay(1); @@ -694,6 +712,7 @@ void dcd_int_handler(uint8_t rhport) if(setup_status) { + enable_functional_reset(true); handle_setup_packet(); } @@ -716,6 +735,7 @@ void dcd_int_handler(uint8_t rhport) break; case USBVECINT_RSTR: + enable_functional_reset(false); // Errata USB4 workaround. bus_reset(); dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); break; @@ -762,10 +782,12 @@ void dcd_int_handler(uint8_t rhport) break; case USBVECINT_INPUT_ENDPOINT0: + enable_functional_reset(true); transmit_packet(0); break; case USBVECINT_OUTPUT_ENDPOINT0: + enable_functional_reset(true); receive_packet(0); break; -- cgit v1.3.1 From 5d3b0896e1eeb1bd45bcb4f2031c7a571f1a16cb Mon Sep 17 00:00:00 2001 From: Clifroy Henry Date: Sat, 8 Jul 2023 17:36:08 -0400 Subject: Removed trailing whitespace. --- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 25c2fb301..870cd725d 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -688,7 +688,7 @@ static void handle_bus_power_event(void *param) if(!USBPLLIR) // A successful lock is indicated by all PLL-related interrupt { // flags being cleared. - dcd_init(0); // Re-initialize the USB module. + dcd_init(0); // Re-initialize the USB module. } } else // Event caused by removal of bus power. -- cgit v1.3.1 From dfef0bc81b1677c2d6bbd148b8a0cea4b64aacec Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 11 Apr 2024 22:00:25 +0200 Subject: Cleanup --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 493e634c7..c38247c38 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -459,13 +459,9 @@ static const tusb_desc_endpoint_t ep0IN_desc = { static void dcd_handle_bus_reset(void) { - //__IO uint16_t * const epreg = &(EPREG(0)); USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag for (uint32_t i = 0; i < STFSDEV_EP_COUNT; i++) { - // Clear all EPREG (or maybe this is automatic? I'm not sure) - pcd_set_endpoint(USB, i, 0u); - // Clear EP allocation status ep_alloc_status[i].ep_num = 0xFF; ep_alloc_status[i].ep_type = 0xFF; @@ -624,7 +620,6 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) uint16_t remaining = xfer->total_len - xfer->queued_len; uint16_t cnt = tu_min16(remaining, xfer->max_packet_size); pcd_set_ep_rx_cnt(USB, EPindex, cnt); - pcd_set_ep_rx_cnt(USB, EPindex, remaining); } pcd_set_ep_rx_status(USB, EPindex, USB_EP_RX_VALID); } -- cgit v1.3.1 From 049ceda315cb581eba27c31952f82353bb881520 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 11 Apr 2024 22:02:44 +0200 Subject: Implement dcd_edpt_close_all() --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index c38247c38..cd6142d3a 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -864,7 +864,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) void dcd_edpt_close_all(uint8_t rhport) { (void)rhport; - // TODO implement dcd_edpt_close_all() + + for (uint32_t i = 1; i < STFSDEV_EP_COUNT; i++) { + // Reset endpoint + pcd_set_endpoint(USB, i, 0); + // Clear EP allocation status + ep_alloc_status[i].ep_num = 0xFF; + ep_alloc_status[i].ep_type = 0xFF; + ep_alloc_status[i].allocated[0] = false; + ep_alloc_status[i].allocated[1] = false; + } + + // Reset PMA allocation + ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * MAX_EP_COUNT + 2 * CFG_TUD_ENDPOINT0_SIZE; } /** -- cgit v1.3.1 From bf649988ef8ffd39435dddc747f953faf78db471 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Apr 2024 12:06:13 +0700 Subject: add blocking delay for msp430 with max 25mhz --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 4 +- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 59 ++++++++++++++------------- 2 files changed, 33 insertions(+), 30 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 7bf726f3f..bb96b4937 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -544,14 +544,14 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) { * - Software should ensure that a small delay is included before accessing the SRAM contents. This delay * should be 800 ns in Full Speed mode and 6.4 μs in Low Speed mode * - Since H5 can run up to 250Mhz -> 1 cycle = 4ns. Per errata, we need to wait 200 cycles. Though executing code - * also takes time, so we'll wait 40 cycles (count = 20). + * also takes time, so we'll wait 60 cycles (count = 20). * - Since Low Speed mode is not supported/popular, we will ignore it for now. * * Note: this errata also seems to apply to G0, U5, H5 etc. */ volatile uint32_t cycle_count = 20; // defined as PCD_RX_PMA_CNT in stm32 hal_driver while (cycle_count > 0U) { - cycle_count--; // each count take 2 cycle (1 cycle for sub, 1 cycle for compare/jump) + cycle_count--; // each count take 3 cycles (1 for sub, jump, and compare) } #endif diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 870cd725d..8005f5f7b 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -154,14 +154,11 @@ void dcd_init (uint8_t rhport) USBVECINT = 0; - if(USBPWRCTL & USBBGVBV) // Bus power detected? - { + if(USBPWRCTL & USBBGVBV) {// Bus power detected? USBPWRCTL |= VBOFFIE; // Enable bus-power-removed interrupt. USBIE |= RSTRIE; // Enable reset and wait for it before continuing. USBCNF |= PUR_EN; // Enable pullup. - } - else - { + } else { USBPWRCTL |= VBONIE; // Enable bus-power-applied interrupt. USBCNF &= ~USB_EN; // Disable USB module until bus power is detected. } @@ -639,8 +636,7 @@ static void handle_setup_packet(void) _setup_packet[i] = setup_buf[i]; } - // Force NAKs until tinyusb can handle the SETUP packet and prepare - // for a new xfer. + // Force NAKs until tinyusb can handle the SETUP packet and prepare for a new xfer. USBIEPCNT_0 |= NAK; USBOEPCNT_0 |= NAK; @@ -660,16 +656,28 @@ static void handle_setup_packet(void) dcd_event_setup_received(0, (uint8_t*) &_setup_packet[0], true); } -static void handle_bus_power_event(void *param) -{ +#if CFG_TUSB_OS == OPT_OS_NONE +TU_ATTR_ALWAYS_INLINE static inline void tu_delay(uint32_t ms) { + // msp430 can run up to 25Mhz -> 40ns per cycle. 1 ms = 25000 cycles + // each loop need 4 cycle: 1 sub, 1 cmp, 1 jump, 1 nop + volatile uint32_t cycles = (25000 * ms) >> 2; + while (cycles > 0) { + cycles--; + asm("nop"); + } +} +#else +#define tu_delay(ms) osal_task_delay(ms) +#endif + +static void handle_bus_power_event(void *param) { (void) param; - osal_task_delay(5); // Bus power settling delay. + tu_delay(5); // Bus power settling delay. USBKEYPID = USBKEY; - if(USBPWRCTL & USBBGVBV) // Event caused by application of bus power. - { + if(USBPWRCTL & USBBGVBV) { // Event caused by application of bus power. USBPWRCTL |= VBOFFIE; // Enable bus-power-removed interrupt. USBPLLDIVB = USBPLLDIVB; // For some reason the PLL will *NOT* lock unless the divider // register is re-written. The assumption here is that this @@ -678,21 +686,17 @@ static void handle_bus_power_event(void *param) USBPLLCTL |= (UPLLEN | UPFDEN); // Enable the PLL. uint16_t attempts = 0; - - do // Poll the PLL, checking for a successful lock. - { + do { // Poll the PLL, checking for a successful lock. USBPLLIR = 0; - osal_task_delay(1); + tu_delay(1); attempts++; } while ((attempts < 10) && (USBPLLIR != 0)); - if(!USBPLLIR) // A successful lock is indicated by all PLL-related interrupt - { // flags being cleared. + // A successful lock is indicated by all PLL-related interrupt flags being cleared. + if(!USBPLLIR) { dcd_init(0); // Re-initialize the USB module. } - } - else // Event caused by removal of bus power. - { + } else { // Event caused by removal of bus power. USBPWRCTL |= VBONIE; // Enable bus-power-applied interrupt. USBPLLCTL &= ~(UPLLEN | UPFDEN); // Disable the PLL. USBCNF = 0; // Disable the USB module. @@ -741,20 +745,19 @@ void dcd_int_handler(uint8_t rhport) break; case USBVECINT_PWR_VBUSOn: - case USBVECINT_PWR_VBUSOff: + case USBVECINT_PWR_VBUSOff: { USBKEYPID = USBKEY; // Prevent (possibly) unstable power from generating spurious interrupts. USBPWRCTL &= ~(VBONIE | VBOFFIE); USBKEYPID = 0; - { - dcd_event_t event; + dcd_event_t event; - event.rhport = 0; - event.event_id = USBD_EVENT_FUNC_CALL; - event.func_call.func = handle_bus_power_event; + event.rhport = 0; + event.event_id = USBD_EVENT_FUNC_CALL; + event.func_call.func = handle_bus_power_event; - dcd_event_handler(&event, true); + dcd_event_handler(&event, true); } break; -- cgit v1.3.1 From 6328301bb652458ad752b05129e1944404adc7ca Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Apr 2024 23:56:55 +0700 Subject: revert to use __builtin_ctz() for optimized time --- src/portable/renesas/rusb2/dcd_rusb2.c | 22 +++++++++++++++++----- src/portable/renesas/rusb2/hcd_rusb2.c | 30 +++++++++++++++--------------- 2 files changed, 32 insertions(+), 20 deletions(-) (limited to 'src/portable') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index f9523191a..50400d1f5 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -915,6 +915,18 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) //--------------------------------------------------------------------+ // ISR //--------------------------------------------------------------------+ + +#if defined(__CCRX__) +TU_ATTR_ALWAYS_INLINE static inline unsigned __builtin_ctz(unsigned int value) { + unsigned int count = 0; + while ((value & 1) == 0) { + value >>= 1; + count++; + } + return count; +} +#endif + void dcd_int_handler(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); @@ -1002,13 +1014,13 @@ void dcd_int_handler(uint8_t rhport) // Buffer ready if ( is0 & RUSB2_INTSTS0_BRDY_Msk ) { const unsigned m = rusb->BRDYENB; - const unsigned s = rusb->BRDYSTS & m; + unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ rusb->BRDYSTS = ~s; - for (unsigned p = 0; p < PIPE_COUNT; ++p) { - if (tu_bit_test(s, p)) { - process_pipe_brdy(rhport, p); - } + while (s) { + const unsigned num = __builtin_ctz(s); + process_pipe_brdy(rhport, num); + s &= ~TU_BIT(num); } } } diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 1356b696f..f140da690 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -758,6 +758,17 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { //--------------------------------------------------------------------+ // ISR //--------------------------------------------------------------------+ +#if defined(__CCRX__) +TU_ATTR_ALWAYS_INLINE static inline unsigned __builtin_ctz(unsigned int value) { + unsigned int count = 0; + while ((value & 1) == 0) { + value >>= 1; + count++; + } + return count; +} +#endif + void hcd_int_handler(uint8_t rhport, bool in_isr) { (void) in_isr; @@ -807,23 +818,12 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { } } -#if defined(__CCRX__) - static const int Mod37BitPosition[] = { - -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, - 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, - 20, 8, 19, 18}; -#endif - if (is0 & RUSB2_INTSTS0_NRDY_Msk) { const unsigned m = rusb->NRDYENB; unsigned s = rusb->NRDYSTS & m; rusb->NRDYSTS = ~s; while (s) { -#if defined(__CCRX__) - const unsigned num = Mod37BitPosition[(-s & s) % 37]; -#else const unsigned num = __builtin_ctz(s); -#endif process_pipe_nrdy(rhport, num); s &= ~TU_BIT(num); } @@ -833,10 +833,10 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ rusb->BRDYSTS = ~s; - for (unsigned p = 0; p < PIPE_COUNT; ++p) { - if (tu_bit_test(s, p)) { - process_pipe_brdy(rhport, p); - } + while (s) { + const unsigned num = __builtin_ctz(s); + process_pipe_brdy(rhport, num); + s &= ~TU_BIT(num); } } } -- cgit v1.3.1 From e1c3b5aeab46de79b08b0655e8ece2c37a0f1a92 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 16 Apr 2024 10:57:54 +0700 Subject: minor update to sof --- src/portable/synopsys/dwc2/dcd_dwc2.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 830a1ccd0..a824226c7 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1136,16 +1136,14 @@ void dcd_int_handler(uint8_t rhport) { if(int_status & GINTSTS_SOF) { dwc2->gintsts = GINTSTS_SOF; + const uint32_t frame = (dwc2->dsts & DSTS_FNSOF) >> DSTS_FNSOF_Pos; - if (_sof_en) { - uint32_t frame = (dwc2->dsts & (DSTS_FNSOF)) >> 8; - dcd_event_sof(rhport, frame, true); - } else { - // Disable SOF interrupt if SOF was not explicitly enabled. SOF was used for remote wakeup detection + // Disable SOF interrupt if SOF was not explicitly enabled since SOF was used for remote wakeup detection + if (!_sof_en) { dwc2->gintmsk &= ~GINTMSK_SOFM; } - dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); + dcd_event_sof(rhport, frame, true); } // RxFIFO non-empty interrupt handling. -- cgit v1.3.1 From 1b0ec6b1bd3135209451fab7909130a7b12c23f8 Mon Sep 17 00:00:00 2001 From: Hardy Griech Date: Fri, 22 Sep 2023 18:26:36 +0200 Subject: make it compile also with old Nordic SDK --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 71 +++++++++++++++++++++++++++-------- 1 file changed, 55 insertions(+), 16 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 80a285ef0..e831a09de 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -40,7 +40,6 @@ #include "nrf.h" #include "nrf_clock.h" -#include "nrf_power.h" #include "nrfx_usbd_errata.h" #ifdef __GNUC__ @@ -57,6 +56,13 @@ #include "mcu/mcu.h" #endif +#if 1000*MDK_MAJOR_VERSION + MDK_MINOR_VERSION <= 8040 +// Nordic actually has generated a mess here: nrfx==1.9.0 has MDK 8.40.3 while nrfx==2.0.0 has MDK 8.29.0 +// Unfortunately there are API differences between nrfx<2.0.0 and nrfx>=2.0.0. Hoping that everyone uses +// nRF Connect SDK keeps the libraries up to date. +#define OLD_NORDIC_SDK +#endif + /*------------------------------------------------------------------*/ /* MACRO TYPEDEF CONSTANT ENUM *------------------------------------------------------------------*/ @@ -110,21 +116,6 @@ static struct /* Control / Bulk / Interrupt (CBI) Transfer *------------------------------------------------------------------*/ -// NVIC_GetEnableIRQ is only available in CMSIS v5 -#ifndef NVIC_GetEnableIRQ -static inline uint32_t NVIC_GetEnableIRQ(IRQn_Type IRQn) -{ - if ((int32_t)(IRQn) >= 0) - { - return((uint32_t)(((NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); - } - else - { - return(0U); - } -} -#endif - // check if we are in ISR TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void) { @@ -253,13 +244,27 @@ void dcd_init (uint8_t rhport) void dcd_int_enable(uint8_t rhport) { (void) rhport; +#ifdef SOFTDEVICE_PRESENT + if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) + { + NVIC_EnableIRQ(USBD_IRQn); + } +#else NVIC_EnableIRQ(USBD_IRQn); +#endif } void dcd_int_disable(uint8_t rhport) { (void) rhport; +#ifdef SOFTDEVICE_PRESENT + if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) + { + NVIC_DisableIRQ(USBD_IRQn); + } +#else NVIC_DisableIRQ(USBD_IRQn); +#endif } void dcd_set_address (uint8_t rhport, uint8_t dev_addr) @@ -916,7 +921,11 @@ static bool hfclk_running(void) } #endif +#ifdef OLD_NORDIC_SDK + return nrf_clock_hf_is_running(NRF_CLOCK_HFCLK_HIGH_ACCURACY); +#else return nrf_clock_hf_is_running(NRF_CLOCK, NRF_CLOCK_HFCLK_HIGH_ACCURACY); +#endif } static void hfclk_enable(void) @@ -937,9 +946,14 @@ static void hfclk_enable(void) } #endif +#ifdef OLD_NORDIC_SDK + nrf_clock_event_clear(NRF_CLOCK_EVENT_HFCLKSTARTED); + nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTART); +#else nrf_clock_event_clear(NRF_CLOCK, NRF_CLOCK_EVENT_HFCLKSTARTED); nrf_clock_task_trigger(NRF_CLOCK, NRF_CLOCK_TASK_HFCLKSTART); #endif +#endif } static void hfclk_disable(void) @@ -957,8 +971,12 @@ static void hfclk_disable(void) } #endif +#ifdef OLD_NORDIC_SDK + nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTOP); +#else nrf_clock_task_trigger(NRF_CLOCK, NRF_CLOCK_TASK_HFCLKSTOP); #endif +#endif } // Power & Clock Peripheral on nRF5x to manage USB @@ -1100,13 +1118,27 @@ void tusb_hal_nrf_power_event (uint32_t event) NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk; // Enable interrupt, priorities should be set by application +#ifdef SOFTDEVICE_PRESENT + if (sd_nvic_ClearPendingIRQ(USBD_IRQn) != NRF_SUCCESS) + { + NVIC_ClearPendingIRQ(USBD_IRQn); + } +#else NVIC_ClearPendingIRQ(USBD_IRQn); +#endif // Don't enable USBD interrupt yet, if dcd_init() did not finish yet // Interrupt will be enabled by tud_init(), when USB stack is ready // to handle interrupts. if (tud_inited()) { +#ifdef SOFTDEVICE_PRESENT + if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) + { + NVIC_EnableIRQ(USBD_IRQn); + } +#else NVIC_EnableIRQ(USBD_IRQn); +#endif } // Wait for HFCLK @@ -1127,7 +1159,14 @@ void tusb_hal_nrf_power_event (uint32_t event) __ISB(); __DSB(); // for sync // Disable Interrupt +#ifdef SOFTDEVICE_PRESENT + if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) + { + NVIC_DisableIRQ(USBD_IRQn); + } +#else NVIC_DisableIRQ(USBD_IRQn); +#endif // disable all interrupt NRF_USBD->INTENCLR = NRF_USBD->INTEN; -- cgit v1.3.1 From 2567fe3fd8b69e896b1d29de36d295ee007e5c91 Mon Sep 17 00:00:00 2001 From: Hardy Griech Date: Fri, 22 Sep 2023 18:39:00 +0200 Subject: softdevice nvic calls only if old SDK --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index e831a09de..0e645ec46 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -244,7 +244,7 @@ void dcd_init (uint8_t rhport) void dcd_int_enable(uint8_t rhport) { (void) rhport; -#ifdef SOFTDEVICE_PRESENT +#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_EnableIRQ(USBD_IRQn); @@ -257,7 +257,7 @@ void dcd_int_enable(uint8_t rhport) void dcd_int_disable(uint8_t rhport) { (void) rhport; -#ifdef SOFTDEVICE_PRESENT +#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_DisableIRQ(USBD_IRQn); @@ -1118,7 +1118,7 @@ void tusb_hal_nrf_power_event (uint32_t event) NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk; // Enable interrupt, priorities should be set by application -#ifdef SOFTDEVICE_PRESENT +#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) if (sd_nvic_ClearPendingIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_ClearPendingIRQ(USBD_IRQn); @@ -1131,7 +1131,7 @@ void tusb_hal_nrf_power_event (uint32_t event) // to handle interrupts. if (tud_inited()) { -#ifdef SOFTDEVICE_PRESENT +#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_EnableIRQ(USBD_IRQn); @@ -1159,7 +1159,7 @@ void tusb_hal_nrf_power_event (uint32_t event) __ISB(); __DSB(); // for sync // Disable Interrupt -#ifdef SOFTDEVICE_PRESENT +#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_DisableIRQ(USBD_IRQn); -- cgit v1.3.1 From c535a4d42be742f235126fa679bf65a6751360cc Mon Sep 17 00:00:00 2001 From: Hardy Griech Date: Sat, 25 Nov 2023 14:49:49 +0100 Subject: catch all nrfx versions with an old API --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 40 +++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 13 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 0e645ec46..f5eea1310 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -56,11 +56,25 @@ #include "mcu/mcu.h" #endif -#if 1000*MDK_MAJOR_VERSION + MDK_MINOR_VERSION <= 8040 -// Nordic actually has generated a mess here: nrfx==1.9.0 has MDK 8.40.3 while nrfx==2.0.0 has MDK 8.29.0 -// Unfortunately there are API differences between nrfx<2.0.0 and nrfx>=2.0.0. Hoping that everyone uses -// nRF Connect SDK keeps the libraries up to date. -#define OLD_NORDIC_SDK +// Unfortunately there are API differences between nrfx<2.0.0 and nrfx>=2.0.0 +// Nordic actually has generated a mess here: nrfx==1.9.0 has MDK 8.40.3 while nrfx==2.0.0 has MDK 8.29.0. +// See the below statement to catch all nrfx versions with an old API. +#define _MDK_VERSION 10000*MDK_MAJOR_VERSION + 100*MDK_MINOR_VERSION + MDK_MICRO_VERSION +#if _MDK_VERSION <= 82701 + // nrfx <= 1.8.1 + #define NORDIC_SDK_OLD_API +#elif _MDK_VERSION == 83201 + // nrfx 1.8.2 / 1.8.4 + #define NORDIC_SDK_OLD_API +#elif _MDK_VERSION == 83203 + // nrfx 1.8.5 + #define NORDIC_SDK_OLD_API +#elif _MDK_VERSION == 83500 + // nrfx 1.8.6 + #define NORDIC_SDK_OLD_API +#elif _MDK_VERSION == 84003 + // nrfx 1.9.0 + #define NORDIC_SDK_OLD_API #endif /*------------------------------------------------------------------*/ @@ -244,7 +258,7 @@ void dcd_init (uint8_t rhport) void dcd_int_enable(uint8_t rhport) { (void) rhport; -#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) +#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_EnableIRQ(USBD_IRQn); @@ -257,7 +271,7 @@ void dcd_int_enable(uint8_t rhport) void dcd_int_disable(uint8_t rhport) { (void) rhport; -#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) +#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_DisableIRQ(USBD_IRQn); @@ -921,7 +935,7 @@ static bool hfclk_running(void) } #endif -#ifdef OLD_NORDIC_SDK +#ifdef NORDIC_SDK_OLD_API return nrf_clock_hf_is_running(NRF_CLOCK_HFCLK_HIGH_ACCURACY); #else return nrf_clock_hf_is_running(NRF_CLOCK, NRF_CLOCK_HFCLK_HIGH_ACCURACY); @@ -946,7 +960,7 @@ static void hfclk_enable(void) } #endif -#ifdef OLD_NORDIC_SDK +#ifdef NORDIC_SDK_OLD_API nrf_clock_event_clear(NRF_CLOCK_EVENT_HFCLKSTARTED); nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTART); #else @@ -971,7 +985,7 @@ static void hfclk_disable(void) } #endif -#ifdef OLD_NORDIC_SDK +#ifdef NORDIC_SDK_OLD_API nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTOP); #else nrf_clock_task_trigger(NRF_CLOCK, NRF_CLOCK_TASK_HFCLKSTOP); @@ -1118,7 +1132,7 @@ void tusb_hal_nrf_power_event (uint32_t event) NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk; // Enable interrupt, priorities should be set by application -#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) +#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) if (sd_nvic_ClearPendingIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_ClearPendingIRQ(USBD_IRQn); @@ -1131,7 +1145,7 @@ void tusb_hal_nrf_power_event (uint32_t event) // to handle interrupts. if (tud_inited()) { -#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) +#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_EnableIRQ(USBD_IRQn); @@ -1159,7 +1173,7 @@ void tusb_hal_nrf_power_event (uint32_t event) __ISB(); __DSB(); // for sync // Disable Interrupt -#if defined(SOFTDEVICE_PRESENT) && defined(OLD_NORDIC_SDK) +#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) { NVIC_DisableIRQ(USBD_IRQn); -- cgit v1.3.1 From 37a05e02647a188f562e763ab24cdbd9f48cf434 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 16 Apr 2024 11:23:38 +0700 Subject: revert nvic changes --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 36 +---------------------------------- 1 file changed, 1 insertion(+), 35 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index f5eea1310..5f2de6446 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -258,27 +258,13 @@ void dcd_init (uint8_t rhport) void dcd_int_enable(uint8_t rhport) { (void) rhport; -#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) - if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) - { - NVIC_EnableIRQ(USBD_IRQn); - } -#else NVIC_EnableIRQ(USBD_IRQn); -#endif } void dcd_int_disable(uint8_t rhport) { (void) rhport; -#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) - if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) - { - NVIC_DisableIRQ(USBD_IRQn); - } -#else NVIC_DisableIRQ(USBD_IRQn); -#endif } void dcd_set_address (uint8_t rhport, uint8_t dev_addr) @@ -1132,27 +1118,14 @@ void tusb_hal_nrf_power_event (uint32_t event) NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk; // Enable interrupt, priorities should be set by application -#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) - if (sd_nvic_ClearPendingIRQ(USBD_IRQn) != NRF_SUCCESS) - { - NVIC_ClearPendingIRQ(USBD_IRQn); - } -#else NVIC_ClearPendingIRQ(USBD_IRQn); -#endif + // Don't enable USBD interrupt yet, if dcd_init() did not finish yet // Interrupt will be enabled by tud_init(), when USB stack is ready // to handle interrupts. if (tud_inited()) { -#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) - if (sd_nvic_EnableIRQ(USBD_IRQn) != NRF_SUCCESS) - { - NVIC_EnableIRQ(USBD_IRQn); - } -#else NVIC_EnableIRQ(USBD_IRQn); -#endif } // Wait for HFCLK @@ -1173,14 +1146,7 @@ void tusb_hal_nrf_power_event (uint32_t event) __ISB(); __DSB(); // for sync // Disable Interrupt -#if defined(SOFTDEVICE_PRESENT) && defined(NORDIC_SDK_OLD_API) - if (sd_nvic_DisableIRQ(USBD_IRQn) != NRF_SUCCESS) - { - NVIC_DisableIRQ(USBD_IRQn); - } -#else NVIC_DisableIRQ(USBD_IRQn); -#endif // disable all interrupt NRF_USBD->INTENCLR = NRF_USBD->INTEN; -- cgit v1.3.1 From d82ee79bd0a834a83694c91ce9cff67575283846 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 16 Apr 2024 11:55:03 +0700 Subject: - in case of mdk conflict to use nrfx v2 - allow to force nrfx version with CFG_TUD_NRF_NRFX_VERSION=1 --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 43 +++++++++++++++++------------------ 1 file changed, 21 insertions(+), 22 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 5f2de6446..df5f275db 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -56,25 +56,24 @@ #include "mcu/mcu.h" #endif -// Unfortunately there are API differences between nrfx<2.0.0 and nrfx>=2.0.0 -// Nordic actually has generated a mess here: nrfx==1.9.0 has MDK 8.40.3 while nrfx==2.0.0 has MDK 8.29.0. -// See the below statement to catch all nrfx versions with an old API. -#define _MDK_VERSION 10000*MDK_MAJOR_VERSION + 100*MDK_MINOR_VERSION + MDK_MICRO_VERSION -#if _MDK_VERSION <= 82701 - // nrfx <= 1.8.1 - #define NORDIC_SDK_OLD_API -#elif _MDK_VERSION == 83201 - // nrfx 1.8.2 / 1.8.4 - #define NORDIC_SDK_OLD_API -#elif _MDK_VERSION == 83203 - // nrfx 1.8.5 - #define NORDIC_SDK_OLD_API -#elif _MDK_VERSION == 83500 - // nrfx 1.8.6 - #define NORDIC_SDK_OLD_API -#elif _MDK_VERSION == 84003 - // nrfx 1.9.0 - #define NORDIC_SDK_OLD_API +/* Try to detect nrfx version if not configured with CFG_TUD_NRF_NRFX_VERSION + * nrfx v1 and v2 are concurrently developed. There is no NRFX_VERSION only MDK VERSION which is as follows: + * - v2.6.0: 8.44.1, v2.5.0: 8.40.2, v2.4.0: 8.37.0, v2.3.0: 8.35.0, v2.2.0: 8.32.1, v2.1.0: 8.30.2, v2.0.0: 8.29.0 + * - v1.9.0: 8.40.3, v1.8.6: 8.35.0 (conflict with v2.3.0), v1.8.5: 8.32.3, v1.8.4: 8.32.1 (conflict with v2.2.0), + * v1.8.2: 8.32.1 (conflict with v2.2.0), v1.8.1: 8.27.1 + * Therefore the check for v1 would be: + * - MDK < 8.29.0 (v2.0), MDK == 8.32.3, 8.40.3 + * - in case of conflict User of those version must upgrade to other 1.x version or set CFG_TUD_NRF_NRFX_VERSION +*/ +#ifndef CFG_TUD_NRF_NRFX_VERSION + #define _MDK_VERSION (10000*MDK_MAJOR_VERSION + 100*MDK_MINOR_VERSION + MDK_MICRO_VERSION) + + #if _MDK_VERSION < 82900 || _MDK_VERSION == 83203 || _MDK_VERSION == 84003 + // nrfx <= 1.8.1, or 1.8.5 or 1.9.0 + #define CFG_TUD_NRF_NRFX_VERSION 1 + #else + #define CFG_TUD_NRF_NRFX_VERSION 2 + #endif #endif /*------------------------------------------------------------------*/ @@ -921,7 +920,7 @@ static bool hfclk_running(void) } #endif -#ifdef NORDIC_SDK_OLD_API +#if CFG_TUD_NRF_NRFX_VERSION == 1 return nrf_clock_hf_is_running(NRF_CLOCK_HFCLK_HIGH_ACCURACY); #else return nrf_clock_hf_is_running(NRF_CLOCK, NRF_CLOCK_HFCLK_HIGH_ACCURACY); @@ -946,7 +945,7 @@ static void hfclk_enable(void) } #endif -#ifdef NORDIC_SDK_OLD_API +#if CFG_TUD_NRF_NRFX_VERSION == 1 nrf_clock_event_clear(NRF_CLOCK_EVENT_HFCLKSTARTED); nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTART); #else @@ -971,7 +970,7 @@ static void hfclk_disable(void) } #endif -#ifdef NORDIC_SDK_OLD_API +#if CFG_TUD_NRF_NRFX_VERSION == 1 nrf_clock_task_trigger(NRF_CLOCK_TASK_HFCLKSTOP); #else nrf_clock_task_trigger(NRF_CLOCK, NRF_CLOCK_TASK_HFCLKSTOP); -- cgit v1.3.1 From bf29417e5fc1cd157e77510d23b05cf51cae2b34 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 16 Apr 2024 12:59:28 +0700 Subject: code format --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 545 ++++++++++++++-------------------- 1 file changed, 216 insertions(+), 329 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index df5f275db..38d37bfc6 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -79,25 +79,22 @@ /*------------------------------------------------------------------*/ /* MACRO TYPEDEF CONSTANT ENUM *------------------------------------------------------------------*/ -enum -{ +enum { // Max allowed by USB specs - MAX_PACKET_SIZE = 64, + MAX_PACKET_SIZE = 64, // Mask of all END event (IN & OUT) for all endpoints. ENDEPIN0-7, ENDEPOUT0-7, ENDISOIN, ENDISOOUT EDPT_END_ALL_MASK = (0xff << USBD_INTEN_ENDEPIN0_Pos) | (0xff << USBD_INTEN_ENDEPOUT0_Pos) | USBD_INTENCLR_ENDISOIN_Msk | USBD_INTEN_ENDISOOUT_Msk }; -enum -{ - EP_ISO_NUM = 8, // Endpoint number is fixed (8) for ISOOUT and ISOIN +enum { + EP_ISO_NUM = 8, // Endpoint number is fixed (8) for ISOOUT and ISOIN EP_CBI_COUNT = 8 // Control Bulk Interrupt endpoints count }; // Transfer Descriptor -typedef struct -{ +typedef struct { uint8_t* buffer; uint16_t total_len; volatile uint16_t actual_len; @@ -115,98 +112,83 @@ typedef struct } xfer_td_t; // Data for managing dcd -static struct -{ +static struct { // All 8 endpoints including control IN & OUT (offset 1) // +1 for ISO endpoints xfer_td_t xfer[EP_CBI_COUNT + 1][2]; // nRF can only carry one DMA at a time, this is used to guard the access to EasyDMA atomic_bool dma_running; -}_dcd; +} _dcd; /*------------------------------------------------------------------*/ /* Control / Bulk / Interrupt (CBI) Transfer *------------------------------------------------------------------*/ // check if we are in ISR -TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void) -{ +TU_ATTR_ALWAYS_INLINE static inline bool is_in_isr(void) { return (SCB->ICSR & SCB_ICSR_VECTACTIVE_Msk) ? true : false; } // helper to start DMA -static void start_dma(volatile uint32_t* reg_startep) -{ +static void start_dma(volatile uint32_t* reg_startep) { (*reg_startep) = 1; - __ISB(); __DSB(); + __ISB(); + __DSB(); // TASKS_EP0STATUS, TASKS_EP0RCVOUT seem to need EasyDMA to be available // However these don't trigger any DMA transfer and got ENDED event subsequently // Therefore dma_pending is corrected right away - if ( (reg_startep == &NRF_USBD->TASKS_EP0STATUS) || (reg_startep == &NRF_USBD->TASKS_EP0RCVOUT) ) - { + if ((reg_startep == &NRF_USBD->TASKS_EP0STATUS) || (reg_startep == &NRF_USBD->TASKS_EP0RCVOUT)) { atomic_flag_clear(&_dcd.dma_running); } } -static void edpt_dma_start(volatile uint32_t* reg_startep) -{ - if ( atomic_flag_test_and_set(&_dcd.dma_running) ) - { +static void edpt_dma_start(volatile uint32_t* reg_startep) { + if (atomic_flag_test_and_set(&_dcd.dma_running)) { usbd_defer_func((osal_task_func_t) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); - }else - { + } else { start_dma(reg_startep); } } // DMA is complete -static void edpt_dma_end(void) -{ - TU_ASSERT(_dcd.dma_running, ); +static void edpt_dma_end(void) { + TU_ASSERT(_dcd.dma_running,); atomic_flag_clear(&_dcd.dma_running); } // helper getting td -static inline xfer_td_t* get_td(uint8_t epnum, uint8_t dir) -{ +static inline xfer_td_t* get_td(uint8_t epnum, uint8_t dir) { return &_dcd.xfer[epnum][dir]; } static void xact_out_dma(uint8_t epnum); + // Function wraps xact_out_dma which wants uint8_t while usbd_defer_func wants void (*)(void *) -static void xact_out_dma_wrapper(void *epnum) -{ - xact_out_dma((uint8_t)((uintptr_t)epnum)); +static void xact_out_dma_wrapper(void* epnum) { + xact_out_dma((uint8_t) ((uintptr_t) epnum)); } // Start DMA to move data from Endpoint -> RAM -static void xact_out_dma(uint8_t epnum) -{ +static void xact_out_dma(uint8_t epnum) { xfer_td_t* xfer = get_td(epnum, TUSB_DIR_OUT); uint32_t xact_len; // DMA can't be active during read of SIZE.EPOUT or SIZE.ISOOUT, so try to lock, // If already running defer call regardless if it was called from ISR or task, - if ( atomic_flag_test_and_set(&_dcd.dma_running) ) - { - usbd_defer_func((osal_task_func_t)xact_out_dma_wrapper, (void *)(uint32_t)epnum, is_in_isr()); + if (atomic_flag_test_and_set(&_dcd.dma_running)) { + usbd_defer_func((osal_task_func_t) xact_out_dma_wrapper, (void*) (uint32_t) epnum, is_in_isr()); return; } - if (epnum == EP_ISO_NUM) - { + if (epnum == EP_ISO_NUM) { xact_len = NRF_USBD->SIZE.ISOOUT; // If ZERO bit is set, ignore ISOOUT length - if (xact_len & USBD_SIZE_ISOOUT_ZERO_Msk) - { + if (xact_len & USBD_SIZE_ISOOUT_ZERO_Msk) { xact_len = 0; atomic_flag_clear(&_dcd.dma_running); - } - else - { - if (xfer->started) - { + } else { + if (xfer->started) { // Trigger DMA move data from Endpoint -> SRAM NRF_USBD->ISOOUT.PTR = (uint32_t) xfer->buffer; NRF_USBD->ISOOUT.MAXCNT = xact_len; @@ -216,9 +198,7 @@ static void xact_out_dma(uint8_t epnum) atomic_flag_clear(&_dcd.dma_running); } } - } - else - { + } else { // limit xact len to remaining length xact_len = tu_min16((uint16_t) NRF_USBD->SIZE.EPOUT[epnum], xfer->total_len - xfer->actual_len); @@ -232,14 +212,13 @@ static void xact_out_dma(uint8_t epnum) // Prepare for a CBI transaction IN, call at the start // it start DMA to transfer data from RAM -> Endpoint -static void xact_in_dma(uint8_t epnum) -{ +static void xact_in_dma(uint8_t epnum) { xfer_td_t* xfer = get_td(epnum, TUSB_DIR_IN); // Each transaction is up to Max Packet Size uint16_t const xact_len = tu_min16(xfer->total_len - xfer->actual_len, xfer->mps); - NRF_USBD->EPIN[epnum].PTR = (uint32_t) xfer->buffer; + NRF_USBD->EPIN[epnum].PTR = (uint32_t) xfer->buffer; NRF_USBD->EPIN[epnum].MAXCNT = xact_len; edpt_dma_start(&NRF_USBD->TASKS_STARTEPIN[epnum]); @@ -248,26 +227,22 @@ static void xact_in_dma(uint8_t epnum) //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ -void dcd_init (uint8_t rhport) -{ +void dcd_init(uint8_t rhport) { TU_LOG2("dcd init\r\n"); (void) rhport; } -void dcd_int_enable(uint8_t rhport) -{ +void dcd_int_enable(uint8_t rhport) { (void) rhport; NVIC_EnableIRQ(USBD_IRQn); } -void dcd_int_disable(uint8_t rhport) -{ +void dcd_int_disable(uint8_t rhport) { (void) rhport; NVIC_DisableIRQ(USBD_IRQn); } -void dcd_set_address (uint8_t rhport, uint8_t dev_addr) -{ +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { (void) rhport; (void) dev_addr; // Set Address is automatically update by hw controller, nothing to do @@ -282,8 +257,7 @@ void dcd_set_address (uint8_t rhport, uint8_t dev_addr) NRF_USBD->INTENSET = USBD_INTEN_USBEVENT_Msk; } -void dcd_remote_wakeup(uint8_t rhport) -{ +void dcd_remote_wakeup(uint8_t rhport) { (void) rhport; // Bring controller out of low power mode @@ -292,8 +266,7 @@ void dcd_remote_wakeup(uint8_t rhport) } // disconnect by disabling internal pull-up resistor on D+/D- -void dcd_disconnect(uint8_t rhport) -{ +void dcd_disconnect(uint8_t rhport) { (void) rhport; NRF_USBD->USBPULLUP = 0; @@ -303,14 +276,12 @@ void dcd_disconnect(uint8_t rhport) } // connect by enabling internal pull-up resistor on D+/D- -void dcd_connect(uint8_t rhport) -{ +void dcd_connect(uint8_t rhport) { (void) rhport; NRF_USBD->USBPULLUP = 1; } -void dcd_sof_enable(uint8_t rhport, bool en) -{ +void dcd_sof_enable(uint8_t rhport, bool en) { (void) rhport; (void) en; @@ -320,39 +291,32 @@ void dcd_sof_enable(uint8_t rhport, bool en) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) -{ +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const* desc_edpt) { (void) rhport; uint8_t const ep_addr = desc_edpt->bEndpointAddress; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); _dcd.xfer[epnum][dir].mps = tu_edpt_packet_size(desc_edpt); - if (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS) - { - if (dir == TUSB_DIR_OUT) - { + if (desc_edpt->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS) { + if (dir == TUSB_DIR_OUT) { NRF_USBD->INTENSET = TU_BIT(USBD_INTEN_ENDEPOUT0_Pos + epnum); NRF_USBD->EPOUTEN |= TU_BIT(epnum); // Write any value to SIZE register will allow nRF to ACK/accept data NRF_USBD->SIZE.EPOUT[epnum] = 0; - }else - { + } else { NRF_USBD->INTENSET = TU_BIT(USBD_INTEN_ENDEPIN0_Pos + epnum); - NRF_USBD->EPINEN |= TU_BIT(epnum); + NRF_USBD->EPINEN |= TU_BIT(epnum); } // clear stall and reset DataToggle NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_UnStall << USBD_EPSTALL_STALL_Pos) | ep_addr; NRF_USBD->DTOGGLE = (USBD_DTOGGLE_VALUE_Data0 << USBD_DTOGGLE_VALUE_Pos) | ep_addr; - } - else - { + } else { TU_ASSERT(epnum == EP_ISO_NUM); - if (dir == TUSB_DIR_OUT) - { + if (dir == TUSB_DIR_OUT) { // SPLIT ISO buffer when ISO IN endpoint is already opened. if (_dcd.xfer[EP_ISO_NUM][TUSB_DIR_IN].mps) NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_HalfIN; @@ -365,9 +329,7 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) // Enable SOF and ISOOUT interrupts, and ISOOUT endpoint. NRF_USBD->INTENSET = USBD_INTENSET_ENDISOOUT_Msk | USBD_INTENSET_SOF_Msk; NRF_USBD->EPOUTEN |= USBD_EPOUTEN_ISOOUT_Msk; - } - else - { + } else { NRF_USBD->EVENTS_ENDISOIN = 0; // SPLIT ISO buffer when ISO OUT endpoint is already opened. @@ -378,39 +340,38 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) // Enable SOF and ISOIN interrupts, and ISOIN endpoint. NRF_USBD->INTENSET = USBD_INTENSET_ENDISOIN_Msk | USBD_INTENSET_SOF_Msk; - NRF_USBD->EPINEN |= USBD_EPINEN_ISOIN_Msk; + NRF_USBD->EPINEN |= USBD_EPINEN_ISOIN_Msk; } } - __ISB(); __DSB(); + __ISB(); + __DSB(); return true; } -void dcd_edpt_close_all (uint8_t rhport) -{ +void dcd_edpt_close_all(uint8_t rhport) { // disable interrupt to prevent race condition dcd_int_disable(rhport); // disable all non-control (bulk + interrupt) endpoints - for ( uint8_t ep = 1; ep < EP_CBI_COUNT; ep++ ) - { + for (uint8_t ep = 1; ep < EP_CBI_COUNT; ep++) { NRF_USBD->INTENCLR = TU_BIT(USBD_INTEN_ENDEPOUT0_Pos + ep) | TU_BIT(USBD_INTEN_ENDEPIN0_Pos + ep); NRF_USBD->TASKS_STARTEPIN[ep] = 0; NRF_USBD->TASKS_STARTEPOUT[ep] = 0; - tu_memclr(_dcd.xfer[ep], 2*sizeof(xfer_td_t)); + tu_memclr(_dcd.xfer[ep], 2 * sizeof(xfer_td_t)); } // disable both ISO NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk | USBD_INTENCLR_ENDISOOUT_Msk | USBD_INTENCLR_ENDISOIN_Msk; NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_OneDir; - NRF_USBD->TASKS_STARTISOIN = 0; + NRF_USBD->TASKS_STARTISOIN = 0; NRF_USBD->TASKS_STARTISOOUT = 0; - tu_memclr(_dcd.xfer[EP_ISO_NUM], 2*sizeof(xfer_td_t)); + tu_memclr(_dcd.xfer[EP_ISO_NUM], 2 * sizeof(xfer_td_t)); // de-activate all non-control NRF_USBD->EPOUTEN = 1UL; @@ -419,107 +380,89 @@ void dcd_edpt_close_all (uint8_t rhport) dcd_int_enable(rhport); } -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) -{ +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - if (epnum != EP_ISO_NUM) - { + if (epnum != EP_ISO_NUM) { // CBI - if (dir == TUSB_DIR_OUT) - { + if (dir == TUSB_DIR_OUT) { NRF_USBD->INTENCLR = TU_BIT(USBD_INTEN_ENDEPOUT0_Pos + epnum); NRF_USBD->EPOUTEN &= ~TU_BIT(epnum); - } - else - { + } else { NRF_USBD->INTENCLR = TU_BIT(USBD_INTEN_ENDEPIN0_Pos + epnum); NRF_USBD->EPINEN &= ~TU_BIT(epnum); } - } - else - { + } else { _dcd.xfer[EP_ISO_NUM][dir].mps = 0; // ISO - if (dir == TUSB_DIR_OUT) - { + if (dir == TUSB_DIR_OUT) { NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOOUT_Msk; NRF_USBD->EPOUTEN &= ~USBD_EPOUTEN_ISOOUT_Msk; NRF_USBD->EVENTS_ENDISOOUT = 0; - } - else - { + } else { NRF_USBD->INTENCLR = USBD_INTENCLR_ENDISOIN_Msk; NRF_USBD->EPINEN &= ~USBD_EPINEN_ISOIN_Msk; } // One of the ISO endpoints closed, no need to split buffers any more. NRF_USBD->ISOSPLIT = USBD_ISOSPLIT_SPLIT_OneDir; // When both ISO endpoint are close there is no need for SOF any more. - if (_dcd.xfer[EP_ISO_NUM][TUSB_DIR_IN].mps + _dcd.xfer[EP_ISO_NUM][TUSB_DIR_OUT].mps == 0) NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk; + if (_dcd.xfer[EP_ISO_NUM][TUSB_DIR_IN].mps + _dcd.xfer[EP_ISO_NUM][TUSB_DIR_OUT].mps == 0) + NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk; } _dcd.xfer[epnum][dir].started = false; - __ISB(); __DSB(); + __ISB(); + __DSB(); } -bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); xfer_td_t* xfer = get_td(epnum, dir); TU_ASSERT(!xfer->started); - xfer->buffer = buffer; - xfer->total_len = total_bytes; + xfer->buffer = buffer; + xfer->total_len = total_bytes; xfer->actual_len = 0; // Control endpoint with zero-length packet and opposite direction to 1st request byte --> status stage bool const control_status = (epnum == 0 && total_bytes == 0 && dir != tu_edpt_dir(NRF_USBD->BMREQUESTTYPE)); - if ( control_status ) - { + if (control_status) { // Status Phase also requires EasyDMA has to be available as well !!!! edpt_dma_start(&NRF_USBD->TASKS_EP0STATUS); // The nRF doesn't interrupt on status transmit so we queue up a success response. dcd_event_xfer_complete(0, ep_addr, 0, XFER_RESULT_SUCCESS, is_in_isr()); - } - else if ( dir == TUSB_DIR_OUT ) - { + } else if (dir == TUSB_DIR_OUT) { xfer->started = true; - if ( epnum == 0 ) - { + if (epnum == 0) { // Accept next Control Out packet. TASKS_EP0RCVOUT also require EasyDMA edpt_dma_start(&NRF_USBD->TASKS_EP0RCVOUT); - }else - { + } else { // started just set, it could start DMA transfer if interrupt was trigger after this line // code only needs to start transfer (from Endpoint to RAM) when data_received was set // before started was set. If started is NOT set but data_received is, it means that // current transfer was already finished and next data is already present in endpoint and // can be consumed by future transfer - __ISB(); __DSB(); - if ( xfer->data_received && xfer->started ) - { + __ISB(); + __DSB(); + if (xfer->data_received && xfer->started) { // Data is already received previously // start DMA to copy to SRAM xfer->data_received = false; xact_out_dma(epnum); - } - else - { + } else { // nRF auto accept next Bulk/Interrupt OUT packet // nothing to do } } - } - else - { + } else { // Start DMA to copy data from RAM -> Endpoint xact_in_dma(epnum); } @@ -527,42 +470,37 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t return true; } -void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr) -{ +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); xfer_td_t* xfer = get_td(epnum, dir); - if ( epnum == 0 ) - { + if (epnum == 0) { NRF_USBD->TASKS_EP0STALL = 1; - }else if (epnum != EP_ISO_NUM) - { + } else if (epnum != EP_ISO_NUM) { NRF_USBD->EPSTALL = (USBD_EPSTALL_STALL_Stall << USBD_EPSTALL_STALL_Pos) | ep_addr; // Note: nRF can auto ACK packet OUT before get stalled. // There maybe data in endpoint fifo already, we need to pull it out - if ( (dir == TUSB_DIR_OUT) && xfer->data_received ) - { + if ((dir == TUSB_DIR_OUT) && xfer->data_received) { xfer->data_received = false; xact_out_dma(epnum); } } - __ISB(); __DSB(); + __ISB(); + __DSB(); } -void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) -{ +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); - if ( epnum != 0 && epnum != EP_ISO_NUM ) - { + if (epnum != 0 && epnum != EP_ISO_NUM) { // reset data toggle to DATA0 // First write this register with VALUE=Nop to select the endpoint, then either read it to get the status from // VALUE, or write it again with VALUE=Data0 or Data1 @@ -575,26 +513,25 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) // Write any value to SIZE register will allow nRF to ACK/accept data if (dir == TUSB_DIR_OUT) NRF_USBD->SIZE.EPOUT[epnum] = 0; - __ISB(); __DSB(); + __ISB(); + __DSB(); } } /*------------------------------------------------------------------*/ /* Interrupt Handler *------------------------------------------------------------------*/ -void bus_reset(void) -{ +void bus_reset(void) { // 6.35.6 USB controller automatically disabled all endpoints (except control) NRF_USBD->EPOUTEN = 1UL; NRF_USBD->EPINEN = 1UL; - for(int i=0; i<8; i++) - { + for (int i = 0; i < 8; i++) { NRF_USBD->TASKS_STARTEPIN[i] = 0; NRF_USBD->TASKS_STARTEPOUT[i] = 0; } - NRF_USBD->TASKS_STARTISOIN = 0; + NRF_USBD->TASKS_STARTISOIN = 0; NRF_USBD->TASKS_STARTISOOUT = 0; // Clear USB Event Interrupt @@ -604,43 +541,40 @@ void bus_reset(void) // Reset interrupt NRF_USBD->INTENCLR = NRF_USBD->INTEN; NRF_USBD->INTENSET = USBD_INTEN_USBRESET_Msk | USBD_INTEN_USBEVENT_Msk | USBD_INTEN_EPDATA_Msk | - USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk | USBD_INTEN_ENDEPOUT0_Msk; + USBD_INTEN_EP0SETUP_Msk | USBD_INTEN_EP0DATADONE_Msk | USBD_INTEN_ENDEPIN0_Msk | + USBD_INTEN_ENDEPOUT0_Msk; tu_varclr(&_dcd); _dcd.xfer[0][TUSB_DIR_IN].mps = MAX_PACKET_SIZE; _dcd.xfer[0][TUSB_DIR_OUT].mps = MAX_PACKET_SIZE; } -void dcd_int_handler(uint8_t rhport) -{ +void dcd_int_handler(uint8_t rhport) { (void) rhport; - uint32_t const inten = NRF_USBD->INTEN; + uint32_t const inten = NRF_USBD->INTEN; uint32_t int_status = 0; volatile uint32_t* regevt = &NRF_USBD->EVENTS_USBRESET; - for(uint8_t i=0; iactual_len = NRF_USBD->ISOIN.AMOUNT; @@ -649,13 +583,11 @@ void dcd_int_handler(uint8_t rhport) xfer->iso_in_transfer_ready = true; } - if ( int_status & USBD_INTEN_SOF_Msk ) - { + if (int_status & USBD_INTEN_SOF_Msk) { bool iso_enabled = false; // ISOOUT: Transfer data gathered in previous frame from buffer to RAM - if (NRF_USBD->EPOUTEN & USBD_EPOUTEN_ISOOUT_Msk) - { + if (NRF_USBD->EPOUTEN & USBD_EPOUTEN_ISOOUT_Msk) { iso_enabled = true; // Transfer from endpoint to RAM only if data is not corrupted if ((int_status & USBD_INTEN_USBEVENT_Msk) == 0 || @@ -665,20 +597,17 @@ void dcd_int_handler(uint8_t rhport) } // ISOIN: Notify client that data was transferred - if (NRF_USBD->EPINEN & USBD_EPINEN_ISOIN_Msk) - { + if (NRF_USBD->EPINEN & USBD_EPINEN_ISOIN_Msk) { iso_enabled = true; xfer_td_t* xfer = get_td(EP_ISO_NUM, TUSB_DIR_IN); - if ( xfer->iso_in_transfer_ready ) - { + if (xfer->iso_in_transfer_ready) { xfer->iso_in_transfer_ready = false; dcd_event_xfer_complete(0, EP_ISO_NUM | TUSB_DIR_IN_MASK, xfer->actual_len, XFER_RESULT_SUCCESS, true); } } - if ( !iso_enabled ) - { + if (!iso_enabled) { // ISO endpoint is not used, SOF is only enabled one-time for remote wakeup // so we disable it now NRF_USBD->INTENCLR = USBD_INTENSET_SOF_Msk; @@ -687,16 +616,17 @@ void dcd_int_handler(uint8_t rhport) dcd_event_bus_signal(0, DCD_EVENT_SOF, true); } - if ( int_status & USBD_INTEN_USBEVENT_Msk ) - { + if (int_status & USBD_INTEN_USBEVENT_Msk) { TU_LOG(3, "EVENTCAUSE = 0x%04lX\r\n", NRF_USBD->EVENTCAUSE); - enum { EVT_CAUSE_MASK = USBD_EVENTCAUSE_SUSPEND_Msk | USBD_EVENTCAUSE_RESUME_Msk | USBD_EVENTCAUSE_USBWUALLOWED_Msk | USBD_EVENTCAUSE_ISOOUTCRC_Msk }; + enum { + EVT_CAUSE_MASK = USBD_EVENTCAUSE_SUSPEND_Msk | USBD_EVENTCAUSE_RESUME_Msk | USBD_EVENTCAUSE_USBWUALLOWED_Msk | + USBD_EVENTCAUSE_ISOOUTCRC_Msk + }; uint32_t const evt_cause = NRF_USBD->EVENTCAUSE & EVT_CAUSE_MASK; NRF_USBD->EVENTCAUSE = evt_cause; // clear interrupt - if ( evt_cause & USBD_EVENTCAUSE_SUSPEND_Msk ) - { + if (evt_cause & USBD_EVENTCAUSE_SUSPEND_Msk) { // Put controller into low power mode // Leave HFXO disable to application, since it may be used by other peripherals NRF_USBD->LOWPOWER = 1; @@ -704,8 +634,7 @@ void dcd_int_handler(uint8_t rhport) dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true); } - if ( evt_cause & USBD_EVENTCAUSE_USBWUALLOWED_Msk ) - { + if (evt_cause & USBD_EVENTCAUSE_USBWUALLOWED_Msk) { // USB is out of low power mode, and wakeup is allowed // Initiate RESUME signal NRF_USBD->DPDMVALUE = USBD_DPDMVALUE_STATE_Resume; @@ -717,34 +646,29 @@ void dcd_int_handler(uint8_t rhport) NRF_USBD->INTENSET = USBD_INTENSET_SOF_Msk; } - if ( evt_cause & USBD_EVENTCAUSE_RESUME_Msk ) - { + if (evt_cause & USBD_EVENTCAUSE_RESUME_Msk) { dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); } } // Setup tokens are specific to the Control endpoint. - if ( int_status & USBD_INTEN_EP0SETUP_Msk ) - { - uint8_t const setup[8] = - { - NRF_USBD->BMREQUESTTYPE , NRF_USBD->BREQUEST, NRF_USBD->WVALUEL , NRF_USBD->WVALUEH, - NRF_USBD->WINDEXL , NRF_USBD->WINDEXH , NRF_USBD->WLENGTHL, NRF_USBD->WLENGTHH + if (int_status & USBD_INTEN_EP0SETUP_Msk) { + uint8_t const setup[8] = { + NRF_USBD->BMREQUESTTYPE, NRF_USBD->BREQUEST, NRF_USBD->WVALUEL, NRF_USBD->WVALUEH, + NRF_USBD->WINDEXL, NRF_USBD->WINDEXH, NRF_USBD->WLENGTHL, NRF_USBD->WLENGTHH }; // nrf5x hw auto handle set address, there is no need to inform usb stack - tusb_control_request_t const * request = (tusb_control_request_t const *) setup; + tusb_control_request_t const* request = (tusb_control_request_t const*) setup; - if ( !(TUSB_REQ_RCPT_DEVICE == request->bmRequestType_bit.recipient && - TUSB_REQ_TYPE_STANDARD == request->bmRequestType_bit.type && - TUSB_REQ_SET_ADDRESS == request->bRequest) ) - { + if (!(TUSB_REQ_RCPT_DEVICE == request->bmRequestType_bit.recipient && + TUSB_REQ_TYPE_STANDARD == request->bmRequestType_bit.type && + TUSB_REQ_SET_ADDRESS == request->bRequest)) { dcd_event_setup_received(0, setup, true); } } - if ( int_status & EDPT_END_ALL_MASK ) - { + if (int_status & EDPT_END_ALL_MASK) { // DMA complete move data from SRAM <-> Endpoint // Must before endpoint transfer handling edpt_dma_end(); @@ -786,30 +710,24 @@ void dcd_int_handler(uint8_t rhport) * len if Host decides to sent fewer bytes, it this case transaction is also * complete and next transfer is not initiated here like for CBI. */ - for(uint8_t epnum=0; epnumEPOUT[epnum].AMOUNT; - xfer->buffer += xact_len; + xfer->buffer += xact_len; xfer->actual_len += xact_len; // Transfer complete if transaction len < Max Packet Size or total len is transferred - if ( (epnum != EP_ISO_NUM) && (xact_len == xfer->mps) && (xfer->actual_len < xfer->total_len) ) - { - if ( epnum == 0 ) - { + if ((epnum != EP_ISO_NUM) && (xact_len == xfer->mps) && (xfer->actual_len < xfer->total_len)) { + if (epnum == 0) { // Accept next Control Out packet. TASKS_EP0RCVOUT also require EasyDMA edpt_dma_start(&NRF_USBD->TASKS_EP0RCVOUT); - }else - { + } else { // nRF auto accept next Bulk/Interrupt OUT packet // nothing to do } - }else - { + } else { TU_ASSERT(xfer->started,); xfer->total_len = xfer->actual_len; xfer->started = false; @@ -823,11 +741,11 @@ void dcd_int_handler(uint8_t rhport) } // Endpoint <-> Host ( In & OUT ) - if ( int_status & (USBD_INTEN_EPDATA_Msk | USBD_INTEN_EP0DATADONE_Msk) ) - { + if (int_status & (USBD_INTEN_EPDATA_Msk | USBD_INTEN_EP0DATADONE_Msk)) { uint32_t data_status = NRF_USBD->EPDATASTATUS; NRF_USBD->EPDATASTATUS = data_status; - __ISB(); __DSB(); + __ISB(); + __DSB(); // EP0DATADONE is set with either Control Out on IN Data // Since EPDATASTATUS cannot be used to determine whether it is control OUT or IN. @@ -836,22 +754,18 @@ void dcd_int_handler(uint8_t rhport) bool const is_control_out = (int_status & USBD_INTEN_EP0DATADONE_Msk) && !(NRF_USBD->BMREQUESTTYPE & TUSB_DIR_IN_MASK); // CBI In: Endpoint -> Host (transaction complete) - for(uint8_t epnum=0; epnumEPIN[epnum].AMOUNT; - xfer->buffer += xact_len; + xfer->buffer += xact_len; xfer->actual_len += xact_len; - if ( xfer->actual_len < xfer->total_len ) - { + if (xfer->actual_len < xfer->total_len) { // Start DMA to copy next data packet xact_in_dma(epnum); - } else - { + } else { // CBI IN complete dcd_event_xfer_complete(0, epnum | TUSB_DIR_IN_MASK, xfer->actual_len, XFER_RESULT_SUCCESS, true); } @@ -859,17 +773,13 @@ void dcd_int_handler(uint8_t rhport) } // CBI OUT: Host -> Endpoint - for(uint8_t epnum=0; epnumstarted && xfer->actual_len < xfer->total_len ) - { + if (xfer->started && xfer->actual_len < xfer->total_len) { xact_out_dma(epnum); - }else - { + } else { // Data overflow !!! Nah, nRF will auto accept next Bulk/Interrupt OUT packet // Mark this endpoint with data received xfer->data_received = true; @@ -893,27 +803,22 @@ void dcd_int_handler(uint8_t rhport) #define SD_MAGIC_NUMBER 0x51B1E5DB #endif -static inline bool is_sd_existed(void) -{ +TU_ATTR_ALWAYS_INLINE static inline bool is_sd_existed(void) { return *((uint32_t*)(SOFTDEVICE_INFO_STRUCT_ADDRESS+4)) == SD_MAGIC_NUMBER; } // check if SD is existed and enabled -static inline bool is_sd_enabled(void) -{ +TU_ATTR_ALWAYS_INLINE static inline bool is_sd_enabled(void) { if ( !is_sd_existed() ) return false; - uint8_t sd_en = false; (void) sd_softdevice_is_enabled(&sd_en); return sd_en; } #endif -static bool hfclk_running(void) -{ +static bool hfclk_running(void) { #ifdef SOFTDEVICE_PRESENT - if ( is_sd_enabled() ) - { + if ( is_sd_enabled() ) { uint32_t is_running = 0; (void) sd_clock_hfclk_is_running(&is_running); return (is_running ? true : false); @@ -927,19 +832,17 @@ static bool hfclk_running(void) #endif } -static void hfclk_enable(void) -{ +static void hfclk_enable(void) { #if CFG_TUSB_OS == OPT_OS_MYNEWT usb_clock_request(); return; #else // already running, nothing to do - if ( hfclk_running() ) return; + if (hfclk_running()) return; #ifdef SOFTDEVICE_PRESENT - if ( is_sd_enabled() ) - { + if ( is_sd_enabled() ) { (void)sd_clock_hfclk_request(); return; } @@ -955,16 +858,14 @@ static void hfclk_enable(void) #endif } -static void hfclk_disable(void) -{ +static void hfclk_disable(void) { #if CFG_TUSB_OS == OPT_OS_MYNEWT usb_clock_release(); return; #else #ifdef SOFTDEVICE_PRESENT - if ( is_sd_enabled() ) - { + if ( is_sd_enabled() ) { (void)sd_clock_hfclk_release(); return; } @@ -988,8 +889,7 @@ static void hfclk_disable(void) // Therefore this function must be called to handle USB power event by // - nrfx_power_usbevt_init() : if Softdevice is not used or enabled // - SoftDevice SOC event : if SD is used and enabled -void tusb_hal_nrf_power_event (uint32_t event) -{ +void tusb_hal_nrf_power_event(uint32_t event) { // Value is chosen to be as same as NRFX_POWER_USB_EVT_* in nrfx_power.h enum { USB_EVT_DETECTED = 0, @@ -998,50 +898,41 @@ void tusb_hal_nrf_power_event (uint32_t event) }; #if CFG_TUSB_DEBUG >= 2 - const char* const power_evt_str[] = { "Detected", "Removed", "Ready" }; + const char* const power_evt_str[] = {"Detected", "Removed", "Ready"}; TU_LOG(2, "Power USB event: %s\r\n", power_evt_str[event]); #endif - switch ( event ) - { + switch (event) { case USB_EVT_DETECTED: - if ( !NRF_USBD->ENABLE ) - { + if (!NRF_USBD->ENABLE) { // Prepare for receiving READY event: disable interrupt since we will blocking wait NRF_USBD->INTENCLR = USBD_INTEN_USBEVENT_Msk; NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk; - __ISB(); __DSB(); // for sync + __ISB(); + __DSB(); // for sync #ifdef NRF52_SERIES // NRF53 does not need this errata // ERRATA 171, 187, 166 - if ( nrfx_usbd_errata_187() ) - { + if (nrfx_usbd_errata_187()) { // CRITICAL_REGION_ENTER(); - if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) - { - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - *((volatile uint32_t *) (0x4006ED14)) = 0x00000003; - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - } - else - { - *((volatile uint32_t *) (0x4006ED14)) = 0x00000003; + if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t*) (0x4006ED14)) = 0x00000003; + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + } else { + *((volatile uint32_t*) (0x4006ED14)) = 0x00000003; } // CRITICAL_REGION_EXIT(); } - if ( nrfx_usbd_errata_171() ) - { + if (nrfx_usbd_errata_171()) { // CRITICAL_REGION_ENTER(); - if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) - { - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - *((volatile uint32_t *) (0x4006EC14)) = 0x000000C0; - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - } - else - { - *((volatile uint32_t *) (0x4006EC14)) = 0x000000C0; + if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t*) (0x4006EC14)) = 0x000000C0; + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + } else { + *((volatile uint32_t*) (0x4006EC14)) = 0x000000C0; } // CRITICAL_REGION_EXIT(); } @@ -1049,64 +940,58 @@ void tusb_hal_nrf_power_event (uint32_t event) // Enable the peripheral (will cause Ready event) NRF_USBD->ENABLE = 1; - __ISB(); __DSB(); // for sync + __ISB(); + __DSB(); // for sync // Enable HFCLK hfclk_enable(); } - break; + break; case USB_EVT_READY: // Skip if pull-up is enabled and HCLK is already running. // Application probably call this more than necessary. - if ( NRF_USBD->USBPULLUP && hfclk_running() ) break; + if (NRF_USBD->USBPULLUP && hfclk_running()) break; // Waiting for USBD peripheral enabled - while ( !(USBD_EVENTCAUSE_READY_Msk & NRF_USBD->EVENTCAUSE) ) { } + while (!(USBD_EVENTCAUSE_READY_Msk & NRF_USBD->EVENTCAUSE)) {} NRF_USBD->EVENTCAUSE = USBD_EVENTCAUSE_READY_Msk; - __ISB(); __DSB(); // for sync + __ISB(); + __DSB(); // for sync #ifdef NRF52_SERIES - if ( nrfx_usbd_errata_171() ) - { + if (nrfx_usbd_errata_171()) { // CRITICAL_REGION_ENTER(); - if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) - { - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - *((volatile uint32_t *) (0x4006EC14)) = 0x00000000; - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - } - else - { - *((volatile uint32_t *) (0x4006EC14)) = 0x00000000; + if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t*) (0x4006EC14)) = 0x00000000; + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + } else { + *((volatile uint32_t*) (0x4006EC14)) = 0x00000000; } // CRITICAL_REGION_EXIT(); } - if ( nrfx_usbd_errata_187() ) - { + if (nrfx_usbd_errata_187()) { // CRITICAL_REGION_ENTER(); - if ( *((volatile uint32_t *) (0x4006EC00)) == 0x00000000 ) - { - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - *((volatile uint32_t *) (0x4006ED14)) = 0x00000000; - *((volatile uint32_t *) (0x4006EC00)) = 0x00009375; - } - else - { - *((volatile uint32_t *) (0x4006ED14)) = 0x00000000; + if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + *((volatile uint32_t*) (0x4006ED14)) = 0x00000000; + *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; + } else { + *((volatile uint32_t*) (0x4006ED14)) = 0x00000000; } // CRITICAL_REGION_EXIT(); } - if ( nrfx_usbd_errata_166() ) - { - *((volatile uint32_t *) (NRF_USBD_BASE + 0x800)) = 0x7E3; - *((volatile uint32_t *) (NRF_USBD_BASE + 0x804)) = 0x40; + if (nrfx_usbd_errata_166()) { + *((volatile uint32_t*) (NRF_USBD_BASE + 0x800)) = 0x7E3; + *((volatile uint32_t*) (NRF_USBD_BASE + 0x804)) = 0x40; - __ISB(); __DSB(); + __ISB(); + __DSB(); } #endif @@ -1122,27 +1007,27 @@ void tusb_hal_nrf_power_event (uint32_t event) // Don't enable USBD interrupt yet, if dcd_init() did not finish yet // Interrupt will be enabled by tud_init(), when USB stack is ready // to handle interrupts. - if (tud_inited()) - { + if (tud_inited()) { NVIC_EnableIRQ(USBD_IRQn); } // Wait for HFCLK - while ( !hfclk_running() ) { } + while (!hfclk_running()) {} // Enable pull up NRF_USBD->USBPULLUP = 1; - __ISB(); __DSB(); // for sync - break; + __ISB(); + __DSB(); // for sync + break; case USB_EVT_REMOVED: - if ( NRF_USBD->ENABLE ) - { + if (NRF_USBD->ENABLE) { // Abort all transfers // Disable pull up NRF_USBD->USBPULLUP = 0; - __ISB(); __DSB(); // for sync + __ISB(); + __DSB(); // for sync // Disable Interrupt NVIC_DisableIRQ(USBD_IRQn); @@ -1151,15 +1036,17 @@ void tusb_hal_nrf_power_event (uint32_t event) NRF_USBD->INTENCLR = NRF_USBD->INTEN; NRF_USBD->ENABLE = 0; - __ISB(); __DSB(); // for sync + __ISB(); + __DSB(); // for sync hfclk_disable(); dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, is_in_isr()); } - break; + break; - default: break; + default: + break; } } -- cgit v1.3.1 From 3442a87d5b52112a8bc4672322d488703e4ee23e Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 17 Apr 2024 20:06:13 +0700 Subject: - clang h743 build and run cdc_msc ok - switch unit test back to gcc, since path to clang conflict on local setup (x86 and arm) --- examples/build_system/cmake/cpu/cortex-m7.cmake | 1 - examples/build_system/cmake/toolchain/common.cmake | 2 +- hw/bsp/board.c | 19 +++++++++++++++++++ hw/bsp/stm32h7/family.cmake | 7 +++---- src/common/tusb_common.h | 1 + src/portable/synopsys/dwc2/dcd_dwc2.c | 6 +++--- test/unit-test/project.yml | 12 ++++++------ 7 files changed, 33 insertions(+), 15 deletions(-) (limited to 'src/portable') diff --git a/examples/build_system/cmake/cpu/cortex-m7.cmake b/examples/build_system/cmake/cpu/cortex-m7.cmake index f7684af84..b0f84b76b 100644 --- a/examples/build_system/cmake/cpu/cortex-m7.cmake +++ b/examples/build_system/cmake/cpu/cortex-m7.cmake @@ -18,7 +18,6 @@ elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS --target=arm-none-eabi -mcpu=cortex-m7 - -mfloat-abi=hard -mfpu=fpv5-d16 ) set(FREERTOS_PORT GCC_ARM_CM7 CACHE INTERNAL "") diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index 6c6d54c74..bbd670b65 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -45,7 +45,7 @@ elseif (TOOLCHAIN STREQUAL "clang") list(APPEND TOOLCHAIN_EXE_LINKER_FLAGS -Wl,--print-memory-usage -Wl,--gc-sections - -Wl,--cref + #-Wl,--cref ) endif () diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 23b4b6628..996ac9263 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -108,6 +108,25 @@ TU_ATTR_USED int sys_read (int fhdl, char *buf, size_t count) { // st->st_mode = S_IFCHR; //} +// Clang use picolibc +#if defined(__clang__) +static int cl_putc(char c, FILE *f) { + (void) f; + return sys_write(0, &c, 1); +} + +static int cl_getc(FILE* f) { + (void) f; + char c; + return sys_read(0, &c, 1) > 0 ? c : -1; +} + +static FILE __stdio = FDEV_SETUP_STREAM(cl_putc, cl_getc, NULL, _FDEV_SETUP_RW); +FILE *const stdin = &__stdio; +__strong_reference(stdin, stdout); +__strong_reference(stdin, stderr); +#endif + int board_getchar(void) { char c; return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index d852ce21c..ab9ba3fbb 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -56,10 +56,8 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - target_compile_options(${BOARD_TARGET} PUBLIC - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) @@ -75,6 +73,7 @@ function(add_board_target BOARD_TARGET) ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC + #-ldummyhost "LINKER:--script=${LD_FILE_GNU}" ) endif () diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 1f08ce4ed..0d4082c03 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -65,6 +65,7 @@ // Standard Headers #include #include +#include #include #include #include diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index a824226c7..f17d30f06 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -174,7 +174,7 @@ static bool fifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { // Check if free space is available TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size / 4); _allocated_fifo_words_tx += fifo_size; - TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %lu", fifo_size * 4, + TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %" PRIu32, fifo_size * 4, _dwc2_controller[rhport].ep_fifo_size - _allocated_fifo_words_tx * 4); // DIEPTXF starts at FIFO #1. @@ -419,9 +419,9 @@ void print_dwc2_info(dwc2_regs_t* dwc2) { volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; TU_LOG(DWC2_DEBUG, "guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); for (size_t i = 0; i < 5; i++) { - TU_LOG(DWC2_DEBUG, "0x%08lX, ", p[i]); + TU_LOG(DWC2_DEBUG, "0x%08" PRIX32 ", ", p[i]); } - TU_LOG(DWC2_DEBUG, "0x%08lX\r\n", p[5]); + TU_LOG(DWC2_DEBUG, "0x%08" PRIX32 "\r\n", p[5]); } #endif diff --git a/test/unit-test/project.yml b/test/unit-test/project.yml index 82528f68c..7fbbabfe6 100644 --- a/test/unit-test/project.yml +++ b/test/unit-test/project.yml @@ -81,20 +81,20 @@ :tools: :test_compiler: - :executable: clang - :name: 'clang compiler' + :executable: gcc + :name: 'gcc compiler' :arguments: - -I"$": COLLECTION_PATHS_TEST_TOOLCHAIN_INCLUDE #expands to -I search paths - -I"$": COLLECTION_PATHS_TEST_SUPPORT_SOURCE_INCLUDE_VENDOR #expands to -I search paths - -D$: COLLECTION_DEFINES_TEST_AND_VENDOR #expands to all -D defined symbols - - -fsanitize=address + #- -fsanitize=address - -c ${1} #source code input file (Ruby method call param list sub) - -o ${2} #object file output (Ruby method call param list sub) :test_linker: - :executable: clang - :name: 'clang linker' + :executable: gcc + :name: 'gcc linker' :arguments: - - -fsanitize=address + #- -fsanitize=address - ${1} #list of object files to link (Ruby method call param list sub) - -o ${2} #executable file output (Ruby method call param list sub) -- cgit v1.3.1 From 9d1d171b0c54f179b07c4abd3f776da1e512e2fc Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 19 Apr 2024 23:08:27 +0700 Subject: - update nrfx to v3.4.0 - compile nrf with __STARTUP_CLEAR_BSS and link flag -nostartfiles --- hw/bsp/nrf/boards/pca10056/board.cmake | 1 - hw/bsp/nrf/family.c | 46 +++++++++++++++++++++++++++++++--- hw/bsp/nrf/family.cmake | 13 ++++++---- hw/bsp/nrf/linker/nrf52840_xxaa.ld | 26 +++++++++++++++++++ src/portable/nordic/nrf5x/dcd_nrf5x.c | 3 ++- tools/get_deps.py | 2 +- 6 files changed, 79 insertions(+), 12 deletions(-) create mode 100644 hw/bsp/nrf/linker/nrf52840_xxaa.ld (limited to 'src/portable') diff --git a/hw/bsp/nrf/boards/pca10056/board.cmake b/hw/bsp/nrf/boards/pca10056/board.cmake index 693d7beed..cc370aac8 100644 --- a/hw/bsp/nrf/boards/pca10056/board.cmake +++ b/hw/bsp/nrf/boards/pca10056/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52840) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 71c651f5f..897d27c59 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -33,6 +33,7 @@ #pragma GCC diagnostic ignored "-Wcast-qual" #pragma GCC diagnostic ignored "-Wcast-align" #pragma GCC diagnostic ignored "-Wunused-parameter" +#pragma GCC diagnostic ignored "-Wunused-variable" #pragma GCC diagnostic ignored "-Wundef" #pragma GCC diagnostic ignored "-Wredundant-decls" #endif @@ -54,6 +55,14 @@ #endif +// There is API changes between nrfx v2 and v3 +#if 85301 >= (10000*MDK_MAJOR_VERSION + 100*MDK_MINOR_VERSION + MDK_MICRO_VERSION) + // note MDK 8.53.1 is also used by nrfx v3.0.0, just skip this version and use later 3.x + #define NRFX_VER 2 +#else + #define NRFX_VER 3 +#endif + //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -100,11 +109,19 @@ static void max3421_init(void); static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(1); #endif - //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ +// Implement _start() since we use linker flag '-nostartfiles'. +// Requires defined __STARTUP_CLEAR_BSS, +extern int main(void); +TU_ATTR_UNUSED void _start(void) { + // called by startup code + main(); + while (1) {} +} + void board_init(void) { // stop LF clock just in case we jump from application without reset NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; @@ -124,6 +141,7 @@ void board_init(void) { SysTick_Config(SystemCoreClock / 1000); // UART + #if NRFX_VER == 2 nrfx_uarte_config_t uart_cfg = { .pseltxd = UART_TX_PIN, .pselrxd = UART_RX_PIN, @@ -137,6 +155,21 @@ void board_init(void) { .parity = NRF_UARTE_PARITY_EXCLUDED, } }; + #elif NRFX_VER == 3 + nrfx_uarte_config_t uart_cfg = { + .txd_pin = UART_TX_PIN, + .rxd_pin = UART_RX_PIN, + .rts_pin = NRF_UARTE_PSEL_DISCONNECTED, + .cts_pin = NRF_UARTE_PSEL_DISCONNECTED, + .p_context = NULL, + .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE + .interrupt_priority = 7, + .config = { + .hwfc = NRF_UARTE_HWFC_DISABLED, + .parity = NRF_UARTE_PARITY_EXCLUDED, + } + }; + #endif nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); @@ -224,11 +257,17 @@ int board_uart_read(uint8_t* buf, int len) { (void) buf; (void) len; return 0; -// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; +// nrfx_err_t err = nrfx_uarte_rx(&_uart_id, buf, (size_t) len); +// return NRFX_SUCCESS == err ? len : 0; } int board_uart_write(void const* buf, int len) { - return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; + nrfx_err_t err = nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len + #if NRFX_VER == 3 + ,0 + #endif + ); + return (NRFX_SUCCESS == err) ? len : 0; } #if CFG_TUSB_OS == OPT_OS_NONE @@ -241,7 +280,6 @@ void SysTick_Handler(void) { uint32_t board_millis(void) { return system_ticks; } - #endif #ifdef SOFTDEVICE_PRESENT diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 60dcdf753..c038a2035 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -31,14 +31,13 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${NRFX_DIR}/mdk/${MCU_VARIANT}_xxaa.ld) - set(LD_FILE_Clang ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/clang/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_Clang ${LD_FILE_GNU}) endif () if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - #set(STARTUP_FILE_Clang ${NRFX_DIR}/mdk/arm_startup_${MCU_VARIANT}.s) endif () add_library(${BOARD_TARGET} STATIC @@ -48,9 +47,13 @@ function(add_board_target BOARD_TARGET) ${NRFX_DIR}/drivers/src/nrfx_spim.c ${NRFX_DIR}/drivers/src/nrfx_uarte.c ${NRFX_DIR}/mdk/system_${MCU_VARIANT}.c + ${NRFX_DIR}/soc/nrfx_atomic.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - target_compile_definitions(${BOARD_TARGET} PUBLIC CONFIG_GPIO_AS_PINRESET) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __STARTUP_CLEAR_BSS + CONFIG_GPIO_AS_PINRESET + ) if (MCU_VARIANT STREQUAL "nrf52840") target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52840_XXAA) @@ -82,12 +85,12 @@ function(add_board_target BOARD_TARGET) "LINKER:--script=${LD_FILE_GNU}" -L${NRFX_DIR}/mdk --specs=nosys.specs --specs=nano.specs + -nostartfiles ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_Clang}" -L${NRFX_DIR}/mdk - -lcrt0 ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/nrf/linker/nrf52840_xxaa.ld b/hw/bsp/nrf/linker/nrf52840_xxaa.ld new file mode 100644 index 000000000..8768fe072 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf52840_xxaa.ld @@ -0,0 +1,26 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x100000 + EXTFLASH (rx) : ORIGIN = 0x12000000, LENGTH = 0x8000000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 + CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x40000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +/*__tbss_start__ = __tbss_start;*/ +/*__tbss_end__ = __tbss_end;*/ +/*__sbss_start__ = __sbss_start;*/ +/*__sbss_end__ = __sbss_end;*/ + +/* picolibc crt0 */ +/*__data_source = __copy_table_start__;*/ +/*__tls_base = __tdata_start;*/ +/*PROVIDE( __tls_align = MAX(ALIGNOF(.tdata), ALIGNOF(.tbss)) );*/ +/*PROVIDE( __arm32_tls_tcb_offset = MAX(8, __tls_align) );*/ diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 38d37bfc6..d31925806 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -58,7 +58,8 @@ /* Try to detect nrfx version if not configured with CFG_TUD_NRF_NRFX_VERSION * nrfx v1 and v2 are concurrently developed. There is no NRFX_VERSION only MDK VERSION which is as follows: - * - v2.6.0: 8.44.1, v2.5.0: 8.40.2, v2.4.0: 8.37.0, v2.3.0: 8.35.0, v2.2.0: 8.32.1, v2.1.0: 8.30.2, v2.0.0: 8.29.0 + * - v3.0.0: 8.53.1 (conflict with v2.11.0), v3.1.0: 8.55.0 ... + * - v2.11.0: 8.53.1, v2.6.0: 8.44.1, v2.5.0: 8.40.2, v2.4.0: 8.37.0, v2.3.0: 8.35.0, v2.2.0: 8.32.1, v2.1.0: 8.30.2, v2.0.0: 8.29.0 * - v1.9.0: 8.40.3, v1.8.6: 8.35.0 (conflict with v2.3.0), v1.8.5: 8.32.3, v1.8.4: 8.32.1 (conflict with v2.2.0), * v1.8.2: 8.32.1 (conflict with v2.2.0), v1.8.1: 8.27.1 * Therefore the check for v1 would be: diff --git a/tools/get_deps.py b/tools/get_deps.py index 85c8c2126..cfa60002a 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -42,7 +42,7 @@ deps_optional = { '0b79559eb411149d36e073c1635c620e576308d4', 'mm32'], 'hw/mcu/nordic/nrfx': ['https://github.com/NordicSemiconductor/nrfx.git', - '2527e3c8449cfd38aee41598e8af8492f410ed15', + '7c47cc0a56ce44658e6da2458e86cd8783ccc4a2', 'nrf'], 'hw/mcu/nuvoton': ['https://github.com/majbthrd/nuc_driver.git', '2204191ec76283371419fbcec207da02e1bc22fa', -- cgit v1.3.1 From 2e383bf90173aa8fa7b4da8a6cded5527907c465 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 12:12:56 +0700 Subject: dcd nrf change atoimc_bool to atomic_flag --- hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake | 1 - hw/bsp/nrf/family.cmake | 4 ++-- hw/bsp/nrf/linker/nrf52840_s140_v6.ld | 2 +- hw/bsp/nrf/linker/nrf52840_xxaa.ld | 8 +------- hw/bsp/samd51/family.c | 5 +++++ src/portable/nordic/nrf5x/dcd_nrf5x.c | 5 ++--- 6 files changed, 11 insertions(+), 14 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake index 726438d05..6ff1a7b59 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake @@ -1,6 +1,5 @@ set(MCU_VARIANT nrf52840) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) -#set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) # enable max3421 host driver for this board set(MAX3421_HOST 1) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index c038a2035..52a6fc196 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -30,10 +30,10 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + if (NOT DEFINED LD_FILE_GNU) set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) - set(LD_FILE_Clang ${LD_FILE_GNU}) endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) diff --git a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld index e27fa1c91..7cc94a405 100644 --- a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld @@ -1,7 +1,7 @@ /* Linker script to configure memory regions. */ SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ MEMORY { diff --git a/hw/bsp/nrf/linker/nrf52840_xxaa.ld b/hw/bsp/nrf/linker/nrf52840_xxaa.ld index 8768fe072..377c248bb 100644 --- a/hw/bsp/nrf/linker/nrf52840_xxaa.ld +++ b/hw/bsp/nrf/linker/nrf52840_xxaa.ld @@ -1,6 +1,7 @@ /* Linker script to configure memory regions. */ SEARCH_DIR(.) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ MEMORY { @@ -10,7 +11,6 @@ MEMORY CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x40000 } - INCLUDE "nrf_common.ld" /* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ @@ -18,9 +18,3 @@ INCLUDE "nrf_common.ld" /*__tbss_end__ = __tbss_end;*/ /*__sbss_start__ = __sbss_start;*/ /*__sbss_end__ = __sbss_end;*/ - -/* picolibc crt0 */ -/*__data_source = __copy_table_start__;*/ -/*__tls_base = __tdata_start;*/ -/*PROVIDE( __tls_align = MAX(ALIGNOF(.tdata), ALIGNOF(.tbss)) );*/ -/*PROVIDE( __arm32_tls_tcb_offset = MAX(8, __tls_align) );*/ diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 170c88191..d56d9f695 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -388,3 +388,8 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx } #endif + +void HardFault_Handler(void) { + __BKPT(0); + while (1); +} diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index d31925806..56e7f39a0 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -119,7 +119,7 @@ static struct { xfer_td_t xfer[EP_CBI_COUNT + 1][2]; // nRF can only carry one DMA at a time, this is used to guard the access to EasyDMA - atomic_bool dma_running; + atomic_flag dma_running; } _dcd; /*------------------------------------------------------------------*/ @@ -155,7 +155,6 @@ static void edpt_dma_start(volatile uint32_t* reg_startep) { // DMA is complete static void edpt_dma_end(void) { - TU_ASSERT(_dcd.dma_running,); atomic_flag_clear(&_dcd.dma_running); } @@ -618,7 +617,7 @@ void dcd_int_handler(uint8_t rhport) { } if (int_status & USBD_INTEN_USBEVENT_Msk) { - TU_LOG(3, "EVENTCAUSE = 0x%04lX\r\n", NRF_USBD->EVENTCAUSE); + TU_LOG(3, "EVENTCAUSE = 0x%04" PRIX32 "\r\n", NRF_USBD->EVENTCAUSE); enum { EVT_CAUSE_MASK = USBD_EVENTCAUSE_SUSPEND_Msk | USBD_EVENTCAUSE_RESUME_Msk | USBD_EVENTCAUSE_USBWUALLOWED_Msk | -- cgit v1.3.1 From c097c85dcf8e0ef3ea052c146c5f514101827251 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 16:17:22 +0700 Subject: fix print lu format warnings with clang --- examples/device/audio_test_multi_rate/src/main.c | 2 +- examples/device/cdc_uac2/src/uac2_app.c | 4 ++-- examples/device/uac2_headset/src/main.c | 4 ++-- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 4 ++-- examples/host/cdc_msc_hid_freertos/src/msc_app.c | 4 ++-- examples/host/msc_file_explorer/src/msc_app.c | 6 +++--- src/CMakeLists.txt | 2 +- src/class/cdc/cdc_device.c | 13 ++++++------- src/class/usbtmc/usbtmc_device.c | 2 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 2 +- tools/get_deps.py | 3 ++- 12 files changed, 24 insertions(+), 24 deletions(-) (limited to 'src/portable') diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 3e7f40dac..2ff7f10bd 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -272,7 +272,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * sampFreq = (uint32_t)((audio_control_cur_4_t *)pBuff)->bCur; - TU_LOG2("Clock set current freq: %lu\r\n", sampFreq); + TU_LOG2("Clock set current freq: %" PRIu32 "\r\n", sampFreq); return true; break; diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index 98659ea68..c57d98a1a 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -69,7 +69,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -118,7 +118,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index fbd7ffe22..0ea6e7025 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -157,7 +157,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -206,7 +206,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 14725996d..940840a30 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -420,5 +420,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - printf((char*)temp_buf); + printf("%s", (char*)temp_buf); } diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 6ff513be1..7d246af67 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -117,7 +117,7 @@ void tuh_cdc_rx_cb(uint8_t idx) { uint32_t count = tuh_cdc_read(idx, buf, bufsize); buf[count] = 0; - printf((char *) buf); + printf("%s", (char *) buf); } void tuh_cdc_mount_cb(uint8_t idx) { @@ -131,7 +131,7 @@ void tuh_cdc_mount_cb(uint8_t idx) { // otherwise you need to call tuh_cdc_set_line_coding() first cdc_line_coding_t line_coding = { 0 }; if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { - printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index ee02ba917..9ffd5d965 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -47,8 +47,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_dat uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024 * 1024) / block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024 * 1024) / block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index ecea614a2..f323e30f0 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -114,7 +114,7 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); // printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); // For simplicity: we only mount 1 LUN per device @@ -541,10 +541,10 @@ void cli_cmd_ls(EmbeddedCli *cli, char *args, void *context) printf("%-40s", fno.fname); if (fno.fsize < 1024) { - printf("%lu B\r\n", fno.fsize); + printf("%" PRIu32 " B\r\n", fno.fsize); }else { - printf("%lu KB\r\n", fno.fsize / 1024); + printf("%" PRIu32 " KB\r\n", fno.fsize / 1024); } } } diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 076e1e1eb..272962332 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -41,7 +41,7 @@ function(add_tinyusb TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../lib/networking ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") target_compile_options(${TARGET} PRIVATE -Wall -Wextra diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 7ef0530ec..2e0a0c30d 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -43,10 +43,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ - BULK_PACKET_SIZE = (TUD_OPT_HIGH_SPEED ? 512 : 64) -}; +#define BULK_PACKET_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) typedef struct { @@ -176,9 +173,11 @@ uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); // flush if queue more than packet size - // may need to suppress -Wunreachable-code since most of the time CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE - if ( (tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE) || ((CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE) && tu_fifo_full(&p_cdc->tx_ff)) ) - { + if ( tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE + #if CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE + || tu_fifo_full(&p_cdc->tx_ff) // check full if fifo size is less than packet size + #endif + ) { tud_cdc_n_write_flush(itf); } diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 286cbe108..f6cddfbd7 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -360,7 +360,7 @@ uint16_t usbtmcd_open_cb(uint8_t rhport, tusb_desc_interface_t const * itf_desc, // processing a command (such as a clear). Returns true if it was // in the NAK state and successfully transitioned to the ACK wait // state. -bool tud_usbtmc_start_bus_read() +bool tud_usbtmc_start_bus_read(void) { usbtmcd_state_enum oldState = usbtmc_state.state; switch(oldState) diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 56e7f39a0..2fe721d6b 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -147,7 +147,7 @@ static void start_dma(volatile uint32_t* reg_startep) { static void edpt_dma_start(volatile uint32_t* reg_startep) { if (atomic_flag_test_and_set(&_dcd.dma_running)) { - usbd_defer_func((osal_task_func_t) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); + usbd_defer_func((osal_task_func_t)(uintptr_t ) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); } else { start_dma(reg_startep); } diff --git a/tools/get_deps.py b/tools/get_deps.py index cfa60002a..e08246178 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -177,7 +177,8 @@ deps_optional = { '20285262657d1b482d132d20d755c8c330d55c1f', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x' 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5' - 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb'], + 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb' + 'sam3x samd11 samd21 samd51 same5x same7x saml2x samg'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From db30eee0fcacda2b2f3f208ddf5ab9be723129d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 18:08:41 +0700 Subject: clang tested with mcb1800, add heap to lpc18 linker --- examples/host/msc_file_explorer/src/main.c | 17 +++++------- examples/host/msc_file_explorer/src/msc_app.c | 1 - hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 34 ++++++++++++++++------- hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 37 ++++++++++++++++++-------- hw/bsp/lpc18/family.cmake | 8 +++--- hw/bsp/nrf/family.cmake | 3 +-- src/portable/ehci/ehci.c | 2 +- 7 files changed, 64 insertions(+), 38 deletions(-) (limited to 'src/portable') diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 73f3e9eb5..f6b6810f5 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -72,8 +72,7 @@ extern bool msc_app_init(void); extern void msc_app_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host MassStorage Explorer Example\r\n"); @@ -87,8 +86,7 @@ int main(void) msc_app_init(); - while (1) - { + while (1) { // tinyusb host task tuh_task(); @@ -103,28 +101,25 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { (void) dev_addr; } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { (void) dev_addr; } //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index f323e30f0..ddd39c674 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -95,7 +95,6 @@ void msc_app_task(void) // //--------------------------------------------------------------------+ - bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld index f1a3add8f..8562a6e71 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -311,6 +311,20 @@ SECTIONS PROVIDE(end = .); } > RamLoc40 AT> RamLoc40 /* > RamLoc32 AT> RamLoc32 */ + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamLoc40 */ .noinit_RAM2 (NOLOAD) : ALIGN(4) { @@ -383,15 +397,17 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 837dec364..02ea1088e 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -255,7 +255,6 @@ SECTIONS *(COMMON) . = ALIGN(4) ; _ebss = .; - PROVIDE(end = .); } > RamLoc40 /* RamLoc32 */ /* NOINIT section for RamLoc40 */ @@ -266,6 +265,20 @@ SECTIONS . = ALIGN(4) ; } > RamLoc40 + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) { @@ -298,19 +311,21 @@ SECTIONS . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 78f4c510b..bf8efabba 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -47,9 +47,11 @@ function(add_board_target BOARD_TARGET) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 56ff62bc4..1d6702720 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -39,7 +39,6 @@ function(add_board_target BOARD_TARGET) if (NOT DEFINED LD_FILE_GNU) set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) @@ -89,7 +88,7 @@ function(add_board_target BOARD_TARGET) ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" + "LINKER:--script=${LD_FILE_GNU}" -L${NRFX_DIR}/mdk ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index e145cbb1b..01bbf62bf 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -92,7 +92,7 @@ CFG_TUH_MEM_SECTION TU_ATTR_ALIGNED(4096) static ehci_data_t ehci_data; //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= (EHCI_DBG + 1) +#if 0 && CFG_TUSB_DEBUG >= (EHCI_DBG + 1) static inline void print_portsc(ehci_registers_t* regs) { TU_LOG_HEX(EHCI_DBG, regs->portsc); TU_LOG(EHCI_DBG, " Connect Status : %u\r\n", regs->portsc_bm.current_connect_status); -- cgit v1.3.1 From 3fd82cfe225cb05c106eccac830bbcf19206bdb1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 10:57:45 +0700 Subject: clang work with lpc55 --- examples/device/msc_dual_lun/src/main.c | 25 ++++------ hw/bsp/family_support.cmake | 2 +- hw/bsp/lpc55/family.c | 66 +++++++++++++++----------- hw/bsp/lpc55/family.cmake | 69 +++++++++++++--------------- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 2 +- 5 files changed, 83 insertions(+), 81 deletions(-) (limited to 'src/portable') diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index de402d3da..aabd0bf8a 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -39,7 +39,7 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, BLINK_MOUNTED = 1000, BLINK_SUSPENDED = 2500, @@ -50,8 +50,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; void led_blinking_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port @@ -61,8 +60,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); } @@ -73,42 +71,37 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ +void tud_suspend_cb(bool remote_wakeup_en) { (void) remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d86ecc0a2..5f0653646 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -239,7 +239,7 @@ function(family_configure_common TARGET RTOS) if (NOT TARGET segger_rtt) add_library(segger_rtt STATIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) - #target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) +# target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) endif() target_link_libraries(${TARGET} PUBLIC segger_rtt) endif () diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 0fd85988a..cfd5b7032 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -72,13 +72,11 @@ //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ +void USB0_IRQHandler(void) { tud_int_handler(0); } -void USB1_IRQHandler(void) -{ +void USB1_IRQHandler(void) { tud_int_handler(1); } @@ -92,8 +90,7 @@ settings: sources: - {id: SYSCON.fro_hf.outFreq, value: 96 MHz} ******************************************************************/ -void BootClockFROHF96M(void) -{ +void BootClockFROHF96M(void) { /*!< Set up the clock sources */ /*!< Set up FRO */ POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ @@ -116,8 +113,7 @@ void BootClockFROHF96M(void) SystemCoreClock = 96000000U; } -void board_init(void) -{ +void board_init(void) { // Enable IOCON clock CLOCK_EnableClock(kCLOCK_Iocon); @@ -138,7 +134,7 @@ void board_init(void) // LED IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 1}; + gpio_pin_config_t const led_config = {kGPIO_DigitalOutput, 1}; GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); board_led_write(0); @@ -157,7 +153,7 @@ void board_init(void) // Button IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; + gpio_pin_config_t const button_config = {kGPIO_DigitalInput, 0}; GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); #ifdef UART_DEV @@ -170,8 +166,8 @@ void board_init(void) usart_config_t uart_config; USART_GetDefaultConfig(&uart_config); uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; + uart_config.enableTx = true; + uart_config.enableRx = true; USART_Init(UART_DEV, &uart_config, 12000000); #endif @@ -250,9 +246,8 @@ void board_init(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +void board_led_write(bool state) { + GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); #ifdef NEOPIXEL_PIN if (state) { @@ -266,33 +261,50 @@ void board_led_write(bool state) #endif } -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { // active low return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); } -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; return 0; } -int board_uart_write(void const * buf, int len) -{ - USART_WriteBlocking(UART_DEV, (uint8_t const *) buf, len); +int board_uart_write(void const* buf, int len) { + USART_WriteBlocking(UART_DEV, (uint8_t const*) buf, len); return len; } #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ + +void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) -{ +uint32_t board_millis(void) { return system_ticks; } #endif + + +#ifndef __ICCARM__ +// Implement _start() since we use linker flag '-nostartfiles'. +// Requires defined __STARTUP_CLEAR_BSS, +extern int main(void); + +TU_ATTR_UNUSED void _start(void) { + // called by startup code + main(); + while (1) {} +} + +#ifdef __clang__ +void _exit (int __status) { + while (1) {} +} +#endif + +#endif diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 75dabfe5a..21c57fc1f 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -1,9 +1,5 @@ include_guard() -if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") -endif () - set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) @@ -30,9 +26,20 @@ set(HOST_PORT $) function(add_board_target BOARD_TARGET) if (TARGET ${BOARD_TARGET}) return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/common/fsl_common_arm.c @@ -44,12 +51,27 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c ) - + target_include_directories(${BOARD_TARGET} PUBLIC + ${TOP}/lib/sct_neopixel + # driver + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/lpc_iocon + ${SDK_DIR}/drivers/lpc_gpio + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/sctimer + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${CMSIS_DIR}/CMSIS/Core/Include + ) target_compile_definitions(${BOARD_TARGET} PUBLIC CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) BOARD_TUD_RHPORT=${PORT} BOARD_TUH_RHPORT=${HOST_PORT} + __STARTUP_CLEAR_BSS ) + # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM if (PORT EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC @@ -65,42 +87,17 @@ function(add_board_target BOARD_TARGET) ) endif () - target_include_directories(${BOARD_TARGET} PUBLIC - ${TOP}/lib/sct_neopixel - # driver - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/flexcomm - ${SDK_DIR}/drivers/lpc_iocon - ${SDK_DIR}/drivers/lpc_gpio - ${SDK_DIR}/drivers/lpuart - ${SDK_DIR}/drivers/sctimer - # mcu - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ) - update_board(${BOARD_TARGET}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () - - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) - endif () - - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC - # linker file "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index f4ed09d83..022904a3a 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -239,7 +239,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(ep_cmd_sts_t* ep_cs, bool is_ return is_highspeed ? (ep_cs[0].cmd_sts.type && !ep_cs[0].cmd_sts.rf_tv) : ep_cs->cmd_sts.type; } -TU_ATTR_ALWAYS_INLINE static inline bool ep_is_bulk(ep_cmd_sts_t* ep_cs) { +TU_ATTR_ALWAYS_INLINE TU_ATTR_UNUSED static inline bool ep_is_bulk(ep_cmd_sts_t* ep_cs) { return (ep_cs[0].cmd_sts.type == 0) && (ep_cs[0].cmd_sts.rf_tv == 0); } -- cgit v1.3.1 From 0f3d6c61b563f8776d6e9f90a8b459a513f79fc1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 12:04:08 +0700 Subject: port clang stm32: f1, f2, f3 --- .github/workflows/build_arm.yml | 1 - .github/workflows/cmake_arm.yml | 4 + hw/bsp/stm32f1/family.cmake | 26 +- hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake | 10 + hw/bsp/stm32f2/boards/stm32f207nucleo/board.h | 57 ++++ .../boards/stm32f207nucleo/stm32f207nucleo.c | 214 ------------ hw/bsp/stm32f2/family.c | 150 +++++++++ hw/bsp/stm32f2/family.cmake | 112 +++++++ hw/bsp/stm32f3/boards/stm32f303disco/board.cmake | 10 + hw/bsp/stm32f3/boards/stm32f303disco/board.h | 61 ++++ .../stm32f3/boards/stm32f303disco/stm32f303disco.c | 216 ------------- .../boards/stm32f303disco/stm32f3xx_hal_conf.h | 357 --------------------- hw/bsp/stm32f3/family.c | 152 +++++++++ hw/bsp/stm32f3/family.cmake | 110 +++++++ hw/bsp/stm32f3/stm32f3xx_hal_conf.h | 357 +++++++++++++++++++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 8 +- 16 files changed, 1043 insertions(+), 802 deletions(-) create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/board.h delete mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c create mode 100644 hw/bsp/stm32f2/family.c create mode 100644 hw/bsp/stm32f2/family.cmake create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/board.cmake create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/board.h delete mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c delete mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h create mode 100644 hw/bsp/stm32f3/family.c create mode 100644 hw/bsp/stm32f3/family.cmake create mode 100644 hw/bsp/stm32f3/stm32f3xx_hal_conf.h (limited to 'src/portable') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 9f3270c91..12e6615ea 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -41,7 +41,6 @@ jobs: - 'lpc51' - 'mm32 msp432e4' - 'samd11 same5x saml2x' - - 'stm32f2 stm32f3' - 'stm32l0 stm32wb' - 'tm4c123 xmc4000' steps: diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index bc2a98b59..8eb1e3f74 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -49,6 +49,8 @@ jobs: - 'samd51' - 'stm32f0' - 'stm32f1' + - 'stm32f2' + - 'stm32f3' - 'stm32f4' - 'stm32f7' - 'stm32g0' @@ -135,6 +137,8 @@ jobs: - 'samd51' - 'stm32f0' - 'stm32f1' + - 'stm32f2' + - 'stm32f3' - 'stm32f4' - 'stm32f7' - 'stm32g0' diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 6657c85ce..cf7e8e9b1 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -1,9 +1,5 @@ include_guard() -if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") -endif () - set(ST_FAMILY f1) set(ST_PREFIX stm32${ST_FAMILY}xx) @@ -29,8 +25,14 @@ function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) # Startup & Linker script set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -47,10 +49,8 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - target_compile_options(${BOARD_TARGET} PUBLIC - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) @@ -58,9 +58,11 @@ function(add_board_target BOARD_TARGET) target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC @@ -106,5 +108,5 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_stlink(${TARGET}) - #family_flash_jlink(${TARGET}) + family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake new file mode 100644 index 000000000..8f78e6295 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f207xx) +set(JLINK_DEVICE stm32f207zg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F207ZGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F207xx + ) +endfunction() diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h new file mode 100644 index 000000000..3301ede27 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h @@ -0,0 +1,57 @@ +#ifndef BOARD_H +#define BOARD_H + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 120000000 + * HCLK(Hz) = 120000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 8000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 240 + * PLL_P = 2 + * PLL_Q = 5 + * VDD(V) = 3.3 + * Flash Latency(WS) = 3 + * @param None + * @retval None + */ +static inline void SystemClock_Config(void) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000; + RCC_OscInitStruct.PLL.PLLN = 240; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 5; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); +} + +#endif diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c deleted file mode 100644 index dfbe7b743..000000000 --- a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" - -#include "stm32f2xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button -} - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 120000000 - * HCLK(Hz) = 120000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 4 - * APB2 Prescaler = 2 - * HSE Frequency(Hz) = 8000000 - * PLL_M = HSE_VALUE/1000000 - * PLL_N = 240 - * PLL_P = 2 - * PLL_Q = 5 - * VDD(V) = 3.3 - * Flash Latency(WS) = 3 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 240; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 5; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - - all_rcc_clk_enable(); - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clocks */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c new file mode 100644 index 000000000..8b1c56423 --- /dev/null +++ b/hw/bsp/stm32f2/family.c @@ -0,0 +1,150 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f2xx_hal.h" +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) { + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED + __HAL_RCC_GPIOC_CLK_ENABLE(); // Button +} + +void board_init(void) { + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + all_rcc_clk_enable(); + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake new file mode 100644 index 000000000..862680bce --- /dev/null +++ b/hw/bsp/stm32f2/family.cmake @@ -0,0 +1,112 @@ +include_guard() + +set(ST_FAMILY f2) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32F2 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32F2 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake b/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake new file mode 100644 index 000000000..7e02a7910 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f303xc) +set(JLINK_DEVICE stm32f303vc) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F303VCTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F303xC + ) +endfunction() diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.h b/hw/bsp/stm32f3/boards/stm32f303disco/board.h new file mode 100644 index 000000000..706149b49 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.h @@ -0,0 +1,61 @@ +#ifndef BOARD_H +#define BOARD_H + +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_9 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 72000000 + * HCLK(Hz) = 72000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 2 + * APB2 Prescaler = 1 + * HSE Frequency(Hz) = 8000000 + * HSE PREDIV = 1 + * PLLMUL = RCC_PLL_MUL9 (9) + * Flash Latency(WS) = 2 + * @param None + * @retval None + */ +static inline void SystemClock_Config(void) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Configures the USB clock */ + HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); + RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + /* Enable Power Clock */ + __HAL_RCC_PWR_CLK_ENABLE(); +} + +#endif diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c deleted file mode 100644 index d6a39a8e2..000000000 --- a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "stm32f3xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the -// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. - -// FIXME: Do all three need to be handled, or just the LP one? -// USB high-priority interrupt (Channel 74): Triggered only by a correct -// transfer event for isochronous and double-buffer bulk transfer to reach -// the highest possible transfer rate. -void USB_HP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB low-priority interrupt (Channel 75): Triggered by all USB events -// (Correct transfer, USB reset, etc.). The firmware has to check the -// interrupt source before serving the interrupt. -void USB_LP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB -// Suspend mode. -void USBWakeUp_RMP_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_9 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 8000000 - * HSE PREDIV = 1 - * PLLMUL = RCC_PLL_MUL9 (9) - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Configures the USB clock */ - HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); - RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - /* Enable Power Clock */ - __HAL_RCC_PWR_CLK_ENABLE(); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - // Remap the USB interrupts - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_REMAPINTERRUPT_USB_ENABLE(); - - // LED - __HAL_RCC_GPIOE_CLK_ENABLE(); - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure USB DM and DP pins */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF14_USB; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable USB clock - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h deleted file mode 100644 index 82d3765af..000000000 --- a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h +++ /dev/null @@ -1,357 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F3xx_HAL_CONF_H -#define __STM32F3xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SDADC_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) - * - External clock not generated on EVAL 373 - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 0U -#define DATA_CACHE_ENABLE 0U -#define USE_SPI_CRC 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/*#define USE_FULL_ASSERT 1U*/ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f3xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f3xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f3xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f3xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f3xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f3xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f3xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f3xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f3xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f3xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f3xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f3xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f3xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f3xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f3xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f3xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32f3xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f3xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f3xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f3xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f3xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED - #include "stm32f3xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f3xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f3xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f3xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SDADC_MODULE_ENABLED - #include "stm32f3xx_hal_sdadc.h" -#endif /* HAL_SDADC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f3xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f3xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f3xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f3xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f3xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f3xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f3xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f3xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F3xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f3/family.c b/hw/bsp/stm32f3/family.c new file mode 100644 index 000000000..7c194a694 --- /dev/null +++ b/hw/bsp/stm32f3/family.c @@ -0,0 +1,152 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f3xx_hal.h" +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the +// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. + +// FIXME: Do all three need to be handled, or just the LP one? +// USB high-priority interrupt (Channel 74): Triggered only by a correct +// transfer event for isochronous and double-buffer bulk transfer to reach +// the highest possible transfer rate. +void USB_HP_IRQHandler(void) { + tud_int_handler(0); +} + +// USB low-priority interrupt (Channel 75): Triggered by all USB events +// (Correct transfer, USB reset, etc.). The firmware has to check the +// interrupt source before serving the interrupt. +void USB_LP_IRQHandler(void) { + tud_int_handler(0); +} + +// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB +// Suspend mode. +void USBWakeUp_RMP_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + + +void board_init(void) { + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + // Remap the USB interrupts + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_REMAPINTERRUPT_USB_ENABLE(); + + // LED + __HAL_RCC_GPIOE_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure USB DM and DP pins */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF14_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable USB clock + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void HardFault_Handler(void) { + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { + +} diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake new file mode 100644 index 000000000..0a28e480b --- /dev/null +++ b/hw/bsp/stm32f3/family.cmake @@ -0,0 +1,110 @@ +include_guard() + +set(ST_FAMILY f3) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32F3 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32F3 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32f3/stm32f3xx_hal_conf.h b/hw/bsp/stm32f3/stm32f3xx_hal_conf.h new file mode 100644 index 000000000..82d3765af --- /dev/null +++ b/hw/bsp/stm32f3/stm32f3xx_hal_conf.h @@ -0,0 +1,357 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_CONF_H +#define __STM32F3xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_PWR_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SDADC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) + * - External clock not generated on EVAL 373 + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 0U +#define DATA_CACHE_ENABLE 0U +#define USE_SPI_CRC 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/*#define USE_FULL_ASSERT 1U*/ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f3xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f3xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f3xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f3xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f3xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f3xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f3xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f3xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f3xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f3xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f3xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f3xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f3xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f3xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f3xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f3xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f3xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32f3xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f3xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f3xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f3xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f3xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32f3xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f3xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f3xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f3xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SDADC_MODULE_ENABLED + #include "stm32f3xx_hal_sdadc.h" +#endif /* HAL_SDADC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f3xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f3xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f3xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f3xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f3xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f3xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f3xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f3xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F3xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f17d30f06..c2c09a1fc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -440,11 +440,15 @@ static void reset_core(dwc2_regs_t* dwc2) { } static bool phy_hs_supported(dwc2_regs_t* dwc2) { - // note: esp32 incorrect report its hs_phy_type as utmi + (void) dwc2; + #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + // note: esp32 incorrect report its hs_phy_type as utmi + return false; +#elif !TUD_OPT_HIGH_SPEED return false; #else - return TUD_OPT_HIGH_SPEED && dwc2->ghwcfg2_bm.hs_phy_type != HS_PHY_TYPE_NONE; + return dwc2->ghwcfg2_bm.hs_phy_type != HS_PHY_TYPE_NONE; #endif } -- cgit v1.3.1 From c2f836279e88d15c2dd818f44f3c563071f36bca Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Tue, 23 Apr 2024 21:43:59 +0200 Subject: Disable EPs correctly to clear incomplete transfer. --- src/portable/synopsys/dwc2/dcd_dwc2.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index c2c09a1fc..692096fc8 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -202,10 +202,10 @@ static void edpt_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoin (xfer->max_size << DOEPCTL_MPSIZ_Pos); if (dir == TUSB_DIR_OUT) { - dwc2->epout[epnum].doepctl |= dxepctl; + dwc2->epout[epnum].doepctl = dxepctl; dwc2->daintmsk |= TU_BIT(DAINTMSK_OEPM_Pos + epnum); } else { - dwc2->epin[epnum].diepctl |= dxepctl | (epnum << DIEPCTL_TXFNUM_Pos); + dwc2->epin[epnum].diepctl = dxepctl | (epnum << DIEPCTL_TXFNUM_Pos); dwc2->daintmsk |= (1 << (DAINTMSK_IEPM_Pos + epnum)); } } @@ -280,10 +280,17 @@ static void bus_reset(uint8_t rhport) { dwc2->epout[n].doepctl |= DOEPCTL_SNAK; } + // 2. Disable all IN endpoints + for (uint8_t n = 0; n < ep_count; n++) { + if (dwc2->epin[n].diepctl & DIEPCTL_EPENA) { + dwc2->epin[n].diepctl |= DIEPCTL_SNAK | DIEPCTL_EPDIS; + } + } + fifo_flush_tx(dwc2, 0x10); // all tx fifo fifo_flush_rx(dwc2); - // 2. Set up interrupt mask + // 3. Set up interrupt mask dwc2->daintmsk = TU_BIT(DAINTMSK_OEPM_Pos) | TU_BIT(DAINTMSK_IEPM_Pos); dwc2->doepmsk = DOEPMSK_STUPM | DOEPMSK_XFRCM; dwc2->diepmsk = DIEPMSK_TOM | DIEPMSK_XFRCM; @@ -704,11 +711,15 @@ void dcd_edpt_close_all(uint8_t rhport) { for (uint8_t n = 1; n < ep_count; n++) { // disable OUT endpoint - dwc2->epout[n].doepctl = 0; + if (dwc2->epout[n].doepctl & DOEPCTL_EPENA) { + dwc2->epout[n].doepctl |= DOEPCTL_SNAK | DOEPCTL_EPDIS; + } xfer_status[n][TUSB_DIR_OUT].max_size = 0; // disable IN endpoint - dwc2->epin[n].diepctl = 0; + if (dwc2->epin[n].diepctl & DIEPCTL_EPENA) { + dwc2->epin[n].diepctl |= DIEPCTL_SNAK | DIEPCTL_EPDIS; + } xfer_status[n][TUSB_DIR_IN].max_size = 0; } -- cgit v1.3.1 From 2e995d7cf4b2971e3ca7167a097b99832c8d61ce Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Apr 2024 20:23:40 +0700 Subject: adding support for esp32 for use with max3421e host --- examples/device/board_test/src/tusb_config.h | 2 +- examples/device/cdc_msc_freertos/src/main.c | 6 +-- examples/device/cdc_msc_freertos/src/tusb_config.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 6 +-- .../hid_composite_freertos/src/tusb_config.h | 2 +- examples/device/video_capture/src/main.c | 4 +- examples/device/video_capture/src/tusb_config.h | 2 +- examples/device/video_capture_2ch/src/main.c | 4 +- .../device/video_capture_2ch/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 6 +-- .../host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- hw/bsp/board_api.h | 2 +- .../boards/adafruit_feather_esp32_v2/board.cmake | 2 + .../boards/adafruit_feather_esp32_v2/board.h | 53 ++++++++++++++++++++++ hw/bsp/espressif/boards/family.c | 19 ++++---- .../components/tinyusb_src/CMakeLists.txt | 12 +---- hw/bsp/espressif/family.cmake | 6 +-- src/common/tusb_mcu.h | 5 +- src/portable/analog/max3421/hcd_max3421.c | 2 +- src/tusb_option.h | 2 + 21 files changed, 94 insertions(+), 49 deletions(-) create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h (limited to 'src/portable') diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 1a27cc87f..36eafe807 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -49,7 +49,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index e94e8eaec..607d40270 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -111,14 +111,14 @@ int main(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index 91efe7d40..e743c9148 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ff2cb635e..2bd545bc2 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -113,14 +113,14 @@ int main(void) xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 3ba9bf311..0689e0f23 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 2a2b0961f..ddb51e03a 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -288,7 +288,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -344,7 +344,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index bdfc37d87..21483a2da 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index eb1cf2580..e8c2ec6b0 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -296,7 +296,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -352,7 +352,7 @@ void freertos_init_task(void) { #endif // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + #if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index fe66d63b5..43c7dfc90 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 7d246af67..f3495ab28 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 069cbdc90..a6cb4d460 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -107,14 +107,14 @@ int main(void) { xTimerStart(blinky_tm, 0); // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if !TUP_MCU_ESPRESSIF vTaskStartScheduler(); #endif return 0; } -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 35de5ee50..0aab2cd2f 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index f21a32371..eee9ed9c5 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -39,7 +39,7 @@ extern "C" { #include "tusb.h" #if CFG_TUSB_OS == OPT_OS_FREERTOS -#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) +#if TUP_MCU_ESPRESSIF // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake new file mode 100644 index 000000000..18c956714 --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.cmake @@ -0,0 +1,2 @@ +# Apply board specific content here +set(IDF_TARGET "esp32") diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h new file mode 100644 index 000000000..0c53df06b --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32_v2/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 0 +#define NEOPIXEL_POWER_PIN 2 +#define NEOPIXEL_POWER_STATE 1 + +#define BUTTON_PIN 38 +#define BUTTON_STATE_ACTIVE 0 + +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI3_HOST +#define MAX3421_SCK_PIN 5 +#define MAX3421_MOSI_PIN 19 +#define MAX3421_MISO_PIN 21 +#define MAX3421_CS_PIN 33 +#define MAX3421_INTR_PIN 15 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 5599d1504..02e478a0c 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -30,8 +30,12 @@ #include "esp_rom_gpio.h" #include "esp_mac.h" #include "hal/gpio_ll.h" + +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) #include "hal/usb_hal.h" #include "soc/usb_periph.h" +static void configure_pins(usb_hal_context_t* usb); +#endif #include "driver/gpio.h" #include "driver/uart.h" @@ -56,7 +60,6 @@ static led_strip_handle_t led_strip; static void max3421_init(void); #endif -static void configure_pins(usb_hal_context_t* usb); //--------------------------------------------------------------------+ // Implementation @@ -100,7 +103,6 @@ void board_init(void) { }; ESP_ERROR_CHECK(led_strip_new_rmt_device(&strip_config, &rmt_config, &led_strip)); - led_strip_clear(led_strip); // off #endif @@ -109,6 +111,7 @@ void board_init(void) { gpio_set_direction(BUTTON_PIN, GPIO_MODE_INPUT); gpio_set_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN_ONLY : GPIO_PULLUP_ONLY); +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) // USB Controller Hal init periph_module_reset(PERIPH_USB_MODULE); periph_module_enable(PERIPH_USB_MODULE); @@ -118,12 +121,14 @@ void board_init(void) { }; usb_hal_init(&hal); configure_pins(&hal); +#endif #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif } +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) static void configure_pins(usb_hal_context_t* usb) { /* usb_periph_iopins currently configures USB_OTG as USB Device. * Introduce additional parameters in usb_hal_context_t when adding support @@ -153,6 +158,7 @@ static void configure_pins(usb_hal_context_t* usb) { gpio_set_drive_capability(USBPHY_DP_NUM, GPIO_DRIVE_CAP_3); } } +#endif //--------------------------------------------------------------------+ // Board porting API @@ -208,15 +214,12 @@ SemaphoreHandle_t max3421_intr_sem; static void IRAM_ATTR max3421_isr_handler(void* arg) { (void) arg; // arg is gpio num - gpio_set_level(13, 1); BaseType_t xHigherPriorityTaskWoken = pdFALSE; xSemaphoreGiveFromISR(max3421_intr_sem, &xHigherPriorityTaskWoken); if (xHigherPriorityTaskWoken) { portYIELD_FROM_ISR(); } - - gpio_set_level(13, 0); } static void max3421_intr_task(void* param) { @@ -250,16 +253,12 @@ static void max3421_init(void) { spi_device_interface_config_t max3421_cfg = { .mode = 0, - .clock_speed_hz = 26000000, + .clock_speed_hz = 20000000, // S2/S3 can work with 26 Mhz, but esp32 seems only work up to 20 Mhz .spics_io_num = -1, // manual control CS .queue_size = 1 }; ESP_ERROR_CHECK(spi_bus_add_device(MAX3421_SPI_HOST, &max3421_cfg, &max3421_spi)); - // debug - gpio_set_direction(13, GPIO_MODE_OUTPUT); - gpio_set_level(13, 0); - // Interrupt pin max3421_intr_sem = xSemaphoreCreateBinary(); xTaskCreate(max3421_intr_task, "max3421 intr", 2048, NULL, configMAX_PRIORITIES - 2, NULL); diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index abe276910..8bdb3802e 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -5,17 +5,7 @@ set(includes_public) set(compile_options) set(tusb_src "${CMAKE_CURRENT_SOURCE_DIR}/../../../../../src") -if(target STREQUAL "esp32s3") - set(tusb_mcu "OPT_MCU_ESP32S3") -elseif(target STREQUAL "esp32s2") - set(tusb_mcu "OPT_MCU_ESP32S2") -else() - # CONFIG_TINYUSB dependency has been guaranteed by Kconfig logic, - # So it's not possible that cmake goes here - message(FATAL_ERROR "TinyUSB is not support on ${target}.") - return() -endif() - +string(TOUPPER OPT_MCU_${target} tusb_mcu) list(APPEND compile_definitions CFG_TUSB_MCU=${tusb_mcu} CFG_TUSB_OS=OPT_OS_FREERTOS diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index 92a9bcb04..eb97401c3 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -3,11 +3,7 @@ cmake_minimum_required(VERSION 3.5) # Apply board specific content i.e IDF_TARGET must be set before project.cmake is included include("${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake") -if(IDF_TARGET STREQUAL "esp32s2") - set(FAMILY_MCUS ESP32S2) -elseif(IDF_TARGET STREQUAL "esp32s3") - set(FAMILY_MCUS ESP32S3) -endif() +string(TOUPPER ${IDF_TARGET} FAMILY_MCUS) # Add example src and bsp directories set(EXTRA_COMPONENT_DIRS "src" "${CMAKE_CURRENT_LIST_DIR}/boards" "${CMAKE_CURRENT_LIST_DIR}/components") diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 0ae2573cd..2c4d7461d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -329,6 +329,9 @@ #define TUP_USBIP_DWC2 #define TUP_DCD_ENDPOINT_MAX 6 +#elif TU_CHECK_MCU(OPT_MCU_ESP32) && (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) + #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" + //--------------------------------------------------------------------+ // Dialog //--------------------------------------------------------------------+ @@ -426,7 +429,7 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#ifndef TUP_DCD_ENDPOINT_MAX +#if CFG_TUD_ENABLED && !defined(TUP_DCD_ENDPOINT_MAX) #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 39afb7505..053169bf2 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -484,8 +484,8 @@ bool hcd_init(uint8_t rhport) { // v1 is 0x01, v2 is 0x12, v3 is 0x13 uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); - TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); TU_LOG2_HEX(revision); + TU_ASSERT(revision == 0x01 || revision == 0x12 || revision == 0x13, false); // reset reg_write(rhport, USBCTL_ADDR, USBCTL_CHIPRES, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index cbcb69edd..25412d432 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -119,6 +119,8 @@ // Espressif #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 +#define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog #define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x -- cgit v1.3.1 From 223ce56625474764dc00229c44731858abcf4f29 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 26 Apr 2024 00:10:57 +0700 Subject: - add esp32 c3, c6 mcu option - skip breakpoint for espressif riscv --- examples/host/cdc_msc_hid_freertos/src/main.c | 5 ++++- src/common/tusb_mcu.h | 4 ++-- src/common/tusb_verify.h | 2 +- src/portable/analog/max3421/hcd_max3421.c | 2 ++ src/tusb_option.h | 2 ++ 5 files changed, 11 insertions(+), 4 deletions(-) (limited to 'src/portable') diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index a6cb4d460..fa799aede 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -126,7 +126,10 @@ static void usb_host_task(void *param) { (void) param; // init host stack on configured roothub port - tuh_init(BOARD_TUH_RHPORT); + if (!tuh_init(BOARD_TUH_RHPORT)) { + printf("Failed to init USB Host Stack\r\n"); + vTaskSuspend(NULL); + } if (board_init_after_tusb) { board_init_after_tusb(); diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 00526bdba..5a567f2d5 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -429,8 +429,8 @@ #define TUP_MCU_MULTIPLE_CORE 0 #endif -#if !defined(TUP_DCD_ENDPOINT_MAX) - #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" +#if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED +#warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 71406dacf..0a9549c99 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -84,7 +84,7 @@ if ( (*ARM_CM_DHCSR) & 1UL ) __asm("BKPT #0\n"); /* Only halt mcu if debugger is attached */ \ } while(0) -#elif defined(__riscv) +#elif defined(__riscv) && !TUP_MCU_ESPRESSIF #define TU_BREAKPOINT() do { __asm("ebreak\n"); } while(0) #elif defined(_mips) diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 053169bf2..4dc93d2d8 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -479,6 +479,8 @@ bool hcd_init(uint8_t rhport) { _hcd_data.spi_mutex = osal_mutex_create(&_hcd_data.spi_mutexdef); #endif + // NOTE: driver does not seem to work without nRST pin signal + // full duplex, interrupt negative edge reg_write(rhport, PINCTL_ADDR, _tuh_cfg.pinctl | PINCTL_FDUPSPI, false); diff --git a/src/tusb_option.h b/src/tusb_option.h index 25412d432..3ead20ee7 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -120,6 +120,8 @@ #define OPT_MCU_ESP32S2 900 ///< Espressif ESP32-S2 #define OPT_MCU_ESP32S3 901 ///< Espressif ESP32-S3 #define OPT_MCU_ESP32 902 ///< Espressif ESP32 (for host max3421e) +#define OPT_MCU_ESP32C3 903 ///< Espressif ESP32-C3 +#define OPT_MCU_ESP32C6 904 ///< Espressif ESP32-C6 #define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU // Dialog -- cgit v1.3.1 From c717e52ab2453f7672b16f2d63cd70558950ef33 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 May 2024 17:54:44 +0700 Subject: add cmake for lpc11 --- .../device/audio_4_channel_mic_freertos/skip.txt | 1 + .../kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/lpc11/FreeRTOSConfig/FreeRTOSConfig.h | 178 ++++++++++++++++++ hw/bsp/lpc11/boards/lpcxpresso11u37/board.cmake | 19 ++ hw/bsp/lpc11/boards/lpcxpresso11u37/board.h | 98 ++++++++++ .../lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c | 208 --------------------- hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake | 12 ++ hw/bsp/lpc11/boards/lpcxpresso11u68/board.h | 27 +++ hw/bsp/lpc11/boards/lpcxpresso11u68/board.mk | 1 - .../lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c | 135 ------------- hw/bsp/lpc11/family.c | 120 ++++++++++++ hw/bsp/lpc11/family.cmake | 104 +++++++++++ hw/bsp/lpc11/family.mk | 5 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 10 + 14 files changed, 572 insertions(+), 348 deletions(-) create mode 100644 hw/bsp/lpc11/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u37/board.cmake create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u37/board.h delete mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u37/lpcxpresso11u37.c create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u68/board.cmake create mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u68/board.h delete mode 100644 hw/bsp/lpc11/boards/lpcxpresso11u68/lpcxpresso11u68.c create mode 100644 hw/bsp/lpc11/family.c create mode 100644 hw/bsp/lpc11/family.cmake (limited to 'src/portable') diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index eb434c23b..21683518c 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -10,5 +10,6 @@ mcu:SAMX7X mcu:VALENTYUSB_EPTRI mcu:RAXXX mcu:STM32L0 +board:lpcxpresso11u37 family:broadcom_32bit family:broadcom_64bit diff --git a/hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h index 133728596..e6604d360 100644 --- a/hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h @@ -147,7 +147,7 @@ //--------------------------------------------------------------------+ // For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS 4 +#define configPRIO_BITS 2 /* The lowest interrupt priority that can be used in a call to a "set priority" function. */ #define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< Date: Thu, 2 May 2024 18:24:47 +0700 Subject: add cmake for lpc15 --- hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h | 179 +++++++++++++++++++++++++ hw/bsp/lpc15/boards/lpcxpresso1549/board.cmake | 11 ++ hw/bsp/lpc15/family.c | 11 ++ hw/bsp/lpc15/family.cmake | 104 ++++++++++++++ hw/bsp/lpc15/family.mk | 2 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 1 + 6 files changed, 307 insertions(+), 1 deletion(-) create mode 100644 hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/lpc15/boards/lpcxpresso1549/board.cmake create mode 100644 hw/bsp/lpc15/family.cmake (limited to 'src/portable') diff --git a/hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..33bc22b37 --- /dev/null +++ b/hw/bsp/lpc15/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,179 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #ifdef __GNUC__ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wunused-parameter" + #pragma GCC diagnostic ignored "-Wstrict-prototypes" + #endif + + #include "chip.h" + + #ifdef __GNUC__ + #pragma GCC diagnostic pop + #endif +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< Date: Sat, 4 May 2024 12:36:40 +0700 Subject: add cmake for f1c100s --- examples/build_system/cmake/cpu/arm1176jzf-s.cmake | 2 + examples/build_system/cmake/cpu/arm926ej-s.cmake | 21 ++++ examples/build_system/make/cpu/arm926ej-s.mk | 9 ++ hw/bsp/f1c100s/board.h | 1 - hw/bsp/f1c100s/board.mk | 52 --------- hw/bsp/f1c100s/boards/f1c100s/board.cmake | 3 + hw/bsp/f1c100s/boards/f1c100s/board.h | 6 + hw/bsp/f1c100s/boards/f1c100s/board.mk | 1 + hw/bsp/f1c100s/f1c100s.c | 130 --------------------- hw/bsp/f1c100s/family.c | 126 ++++++++++++++++++++ hw/bsp/f1c100s/family.cmake | 114 ++++++++++++++++++ hw/bsp/f1c100s/family.mk | 58 +++++++++ src/portable/sunxi/dcd_sunxi_musb.c | 14 ++- 13 files changed, 348 insertions(+), 189 deletions(-) create mode 100644 examples/build_system/cmake/cpu/arm926ej-s.cmake create mode 100644 examples/build_system/make/cpu/arm926ej-s.mk delete mode 100644 hw/bsp/f1c100s/board.h delete mode 100644 hw/bsp/f1c100s/board.mk create mode 100644 hw/bsp/f1c100s/boards/f1c100s/board.cmake create mode 100644 hw/bsp/f1c100s/boards/f1c100s/board.h create mode 100644 hw/bsp/f1c100s/boards/f1c100s/board.mk delete mode 100644 hw/bsp/f1c100s/f1c100s.c create mode 100644 hw/bsp/f1c100s/family.c create mode 100644 hw/bsp/f1c100s/family.cmake create mode 100644 hw/bsp/f1c100s/family.mk (limited to 'src/portable') diff --git a/examples/build_system/cmake/cpu/arm1176jzf-s.cmake b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake index 11bb52f30..8029e3987 100644 --- a/examples/build_system/cmake/cpu/arm1176jzf-s.cmake +++ b/examples/build_system/cmake/cpu/arm1176jzf-s.cmake @@ -1,6 +1,7 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS -mcpu=arm1176jzf-s + -ffreestanding ) # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") @@ -10,6 +11,7 @@ elseif (TOOLCHAIN STREQUAL "clang") -mcpu=arm1176jzf-s -mfpu=none -mfloat-abi=soft + -ffreestanding ) #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") diff --git a/examples/build_system/cmake/cpu/arm926ej-s.cmake b/examples/build_system/cmake/cpu/arm926ej-s.cmake new file mode 100644 index 000000000..c19b9f8a8 --- /dev/null +++ b/examples/build_system/cmake/cpu/arm926ej-s.cmake @@ -0,0 +1,21 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mcpu=arm926ej-s + -ffreestanding + ) + # set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=arm926ej-s + -mfpu=none + -mfloat-abi=soft + -ffreestanding + ) + #set(FREERTOS_PORT GCC_ARM_CM0 CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + +endif () diff --git a/examples/build_system/make/cpu/arm926ej-s.mk b/examples/build_system/make/cpu/arm926ej-s.mk new file mode 100644 index 000000000..5b84f514f --- /dev/null +++ b/examples/build_system/make/cpu/arm926ej-s.mk @@ -0,0 +1,9 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mcpu=arm926ej-s \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif diff --git a/hw/bsp/f1c100s/board.h b/hw/bsp/f1c100s/board.h deleted file mode 100644 index 0ef9a1700..000000000 --- a/hw/bsp/f1c100s/board.h +++ /dev/null @@ -1 +0,0 @@ -// Nothing valuable here diff --git a/hw/bsp/f1c100s/board.mk b/hw/bsp/f1c100s/board.mk deleted file mode 100644 index 3596e5414..000000000 --- a/hw/bsp/f1c100s/board.mk +++ /dev/null @@ -1,52 +0,0 @@ -MCU_DIR = hw/mcu/allwinner/f1c100s -DEPS_SUBMODULES += hw/mcu/allwinner -DEFINES += -D__ARM32_ARCH__=5 -D__ARM926EJS__ - -CFLAGS += \ - -ffreestanding \ - -std=gnu99 \ - -march=armv5te \ - -mtune=arm926ej-s \ - -mfloat-abi=soft \ - -marm \ - -mno-thumb-interwork \ - -Wno-unused-parameter \ - -Wno-float-equal \ - -DCFG_TUSB_MCU=OPT_MCU_F1C100S \ - -Wno-error=cast-align \ - -Wno-error=address-of-packed-member \ - $(DEFINES) - -LD_FILE = hw/mcu/allwinner/f1c100s/f1c100s.ld -# TODO may skip nanolib -LDFLAGS += -nostdlib -lgcc -specs=nosys.specs -specs=nano.specs - -SRC_C += \ - src/portable/sunxi/dcd_sunxi_musb.c \ - $(MCU_DIR)/machine/sys-uart.c \ - $(MCU_DIR)/machine/exception.c \ - $(MCU_DIR)/machine/sys-clock.c \ - $(MCU_DIR)/machine/sys-copyself.c \ - $(MCU_DIR)/machine/sys-dram.c \ - $(MCU_DIR)/machine/sys-mmu.c \ - $(MCU_DIR)/machine/sys-spi-flash.c \ - $(MCU_DIR)/machine/f1c100s-intc.c \ - $(MCU_DIR)/lib/malloc.c \ - $(MCU_DIR)/lib/printf.c - -SRC_S += \ - $(MCU_DIR)/machine/start.S \ - $(MCU_DIR)/lib/memcpy.S \ - $(MCU_DIR)/lib/memset.S - -INC += \ - $(TOP)/$(MCU_DIR)/include \ - $(TOP)/$(BOARD_PATH) - -# flash target using xfel -flash: flash-xfel - -exec: $(BUILD)/$(PROJECT).bin - xfel ddr - xfel write 0x80000000 $< - xfel exec 0x80000000 diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.cmake b/hw/bsp/f1c100s/boards/f1c100s/board.cmake new file mode 100644 index 000000000..98ed56c57 --- /dev/null +++ b/hw/bsp/f1c100s/boards/f1c100s/board.cmake @@ -0,0 +1,3 @@ +function(update_board TARGET) + # nothing to do +endfunction() diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.h b/hw/bsp/f1c100s/boards/f1c100s/board.h new file mode 100644 index 000000000..3b56a3a57 --- /dev/null +++ b/hw/bsp/f1c100s/boards/f1c100s/board.h @@ -0,0 +1,6 @@ +#ifndef BOARD_H +#define BOARD_H + +// Nothing valuable here + +#endif diff --git a/hw/bsp/f1c100s/boards/f1c100s/board.mk b/hw/bsp/f1c100s/boards/f1c100s/board.mk new file mode 100644 index 000000000..be830bd8c --- /dev/null +++ b/hw/bsp/f1c100s/boards/f1c100s/board.mk @@ -0,0 +1 @@ +# nothing to do diff --git a/hw/bsp/f1c100s/f1c100s.c b/hw/bsp/f1c100s/f1c100s.c deleted file mode 100644 index 272b756f2..000000000 --- a/hw/bsp/f1c100s/f1c100s.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include -#include -#include -#include -#include "bsp/board_api.h" -#include "board.h" - -extern void sys_uart_putc(char c); - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -static void timer_init(void); - -void board_init(void) -{ - arch_local_irq_disable(); - do_init_mem_pool(); - f1c100s_intc_init(); - timer_init(); - printf("Timer INIT done\n"); - arch_local_irq_enable(); -} - -// No LED, no button -void board_led_write(bool state) -{ - -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - int txsize = len; - while (txsize--) { - sys_uart_putc(*(uint8_t const*)buf); - buf++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -uint32_t board_millis(void) -{ - return system_ticks; -} - -static void timer_handler(void) -{ - volatile uint32_t *temp_addr = (uint32_t *)(0x01C20C00 + 0x04); - - /* clear timer */ - *temp_addr |= 0x01; - - system_ticks++; -} - -static void timer_init(void) { - uint32_t temp; - volatile uint32_t *temp_addr; - - /* reload value */ - temp = 12000000 / 1000; - temp_addr = (uint32_t *)(0x01C20C00 + 0x14); - *temp_addr = temp; - - /* continuous | /2 | 24Mhz | reload*/ - temp = (0x00 << 7) | (0x01 << 4) | (0x01 << 2) | (0x00 << 1); - temp_addr = (uint32_t *)(0x01C20C00 + 0x10); - *temp_addr &= 0xffffff00; - *temp_addr |= temp; - - /* open timer irq */ - temp = 0x01 << 0; - temp_addr = (uint32_t *)(0x01C20C00); - *temp_addr |= temp; - - /* set init value */ - temp_addr = (uint32_t *)(0x01C20C00 + 0x18); - *temp_addr = 0; - - /* begin run timer */ - temp = 0x01 << 0; - temp_addr = (uint32_t *)(0x01C20C00 + 0x10); - *temp_addr |= temp; - - f1c100s_intc_set_isr(F1C100S_IRQ_TIMER0, timer_handler); - f1c100s_intc_enable_irq(F1C100S_IRQ_TIMER0); -} -#else -static void timer_init(void) { } -#endif diff --git a/hw/bsp/f1c100s/family.c b/hw/bsp/f1c100s/family.c new file mode 100644 index 000000000..6df4a0ed8 --- /dev/null +++ b/hw/bsp/f1c100s/family.c @@ -0,0 +1,126 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include +#include +#include +#include +#include "bsp/board_api.h" +#include "board.h" + +extern void sys_uart_putc(char c); + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +static void timer_init(void); + +void board_init(void) { + arch_local_irq_disable(); + do_init_mem_pool(); + f1c100s_intc_init(); + timer_init(); + printf("Timer INIT done\n"); + arch_local_irq_enable(); +} + +// No LED, no button +void board_led_write(bool state) { + (void) state; +} + +uint32_t board_button_read(void) { + return 0; +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + int txsize = len; + while (txsize--) { + sys_uart_putc(*(uint8_t const*) buf); + buf++; + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +uint32_t board_millis(void) { + return system_ticks; +} + +static void timer_handler(void) { + volatile uint32_t* temp_addr = (uint32_t*) (0x01C20C00 + 0x04); + + /* clear timer */ + *temp_addr |= 0x01; + + system_ticks++; +} + +static void timer_init(void) { + uint32_t temp; + volatile uint32_t* temp_addr; + + /* reload value */ + temp = 12000000 / 1000; + temp_addr = (uint32_t*) (0x01C20C00 + 0x14); + *temp_addr = temp; + + /* continuous | /2 | 24Mhz | reload*/ + temp = (0x00 << 7) | (0x01 << 4) | (0x01 << 2) | (0x00 << 1); + temp_addr = (uint32_t*) (0x01C20C00 + 0x10); + *temp_addr &= 0xffffff00; + *temp_addr |= temp; + + /* open timer irq */ + temp = 0x01 << 0; + temp_addr = (uint32_t*) (0x01C20C00); + *temp_addr |= temp; + + /* set init value */ + temp_addr = (uint32_t*) (0x01C20C00 + 0x18); + *temp_addr = 0; + + /* begin run timer */ + temp = 0x01 << 0; + temp_addr = (uint32_t*) (0x01C20C00 + 0x10); + *temp_addr |= temp; + + f1c100s_intc_set_isr(F1C100S_IRQ_TIMER0, timer_handler); + f1c100s_intc_enable_irq(F1C100S_IRQ_TIMER0); +} + +#else +static void timer_init(void) { } +#endif diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake new file mode 100644 index 000000000..0903a0143 --- /dev/null +++ b/hw/bsp/f1c100s/family.cmake @@ -0,0 +1,114 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/allwinner/f1c100s) + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR arm926ej-s CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS F1C100S CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # LD_FILE and STARTUP_FILE can be defined in board.cmake + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${SDK_DIR}/f1c100s.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/machine/start.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/lib/malloc.c + ${SDK_DIR}/lib/printf.c + ${SDK_DIR}/lib/memcpy.S + ${SDK_DIR}/lib/memset.S + ${SDK_DIR}/machine/sys-uart.c + ${SDK_DIR}/machine/exception.c + ${SDK_DIR}/machine/sys-clock.c + ${SDK_DIR}/machine/sys-copyself.c + ${SDK_DIR}/machine/sys-dram.c + ${SDK_DIR}/machine/sys-mmu.c + ${SDK_DIR}/machine/sys-spi-flash.c + ${SDK_DIR}/machine/f1c100s-intc.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + __ARM32_ARCH__=5 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/include + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -lgcc + --specs=nosys.specs --specs=nano.specs + "LINKER:--defsym=__bss_end__=__bss_end" + "LINKER:--defsym=__bss_start__=__bss_start" + "LINKER:--defsym=end=__bss_end" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_F1C100S ${RTOS}) + target_sources(${TARGET}-tinyusb PRIVATE + ${TOP}/src/portable/sunxi/dcd_sunxi_musb.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/f1c100s/family.mk b/hw/bsp/f1c100s/family.mk new file mode 100644 index 000000000..be416e72e --- /dev/null +++ b/hw/bsp/f1c100s/family.mk @@ -0,0 +1,58 @@ +SDK_DIR = hw/mcu/allwinner/f1c100s + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= arm926ej-s + +#CFLAGS += \ +# -march=armv5te \ +# -mtune=arm926ej-s \ +# -mfloat-abi=soft \ +# -marm \ + +CFLAGS += \ + -ffreestanding \ + -std=gnu99 \ + -mno-thumb-interwork \ + -D__ARM32_ARCH__=5 \ + -D__ARM926EJS__ \ + -Wno-float-equal \ + -Wno-unused-parameter \ + -DCFG_TUSB_MCU=OPT_MCU_F1C100S \ + -Wno-error=array-bounds \ + +LD_FILE = ${SDK_DIR}/f1c100s.ld + +# TODO may skip nanolib +LDFLAGS += \ + -nostdlib -lgcc \ + --specs=nosys.specs --specs=nano.specs \ + +SRC_C += \ + src/portable/sunxi/dcd_sunxi_musb.c \ + ${SDK_DIR}/machine/sys-uart.c \ + ${SDK_DIR}/machine/exception.c \ + ${SDK_DIR}/machine/sys-clock.c \ + ${SDK_DIR}/machine/sys-copyself.c \ + ${SDK_DIR}/machine/sys-dram.c \ + ${SDK_DIR}/machine/sys-mmu.c \ + ${SDK_DIR}/machine/sys-spi-flash.c \ + ${SDK_DIR}/machine/f1c100s-intc.c \ + ${SDK_DIR}/lib/malloc.c \ + ${SDK_DIR}/lib/printf.c + +SRC_S += \ + ${SDK_DIR}/machine/start.S \ + ${SDK_DIR}/lib/memcpy.S \ + ${SDK_DIR}/lib/memset.S + +INC += \ + $(TOP)/${SDK_DIR}/include \ + $(TOP)/$(BOARD_PATH) + +# flash target using xfel +flash: flash-xfel + +exec: $(BUILD)/$(PROJECT).bin + xfel ddr + xfel write 0x80000000 $< + xfel exec 0x80000000 diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index 6cc1975a8..6f36ad441 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -35,7 +35,9 @@ #include #include #include "musb_def.h" -#include "bsp/board.h" + +//#include "bsp/board_api.h" +extern uint32_t board_millis(void); // TODO remove typedef uint32_t u32; typedef uint16_t u16; @@ -58,7 +60,7 @@ typedef struct TU_ATTR_PACKED typedef struct { - tusb_control_request_t setup_packet; + CFG_TUD_MEM_ALIGN tusb_control_request_t setup_packet; uint16_t remaining_ctrl; /* The number of bytes remaining in data stage of control transfer. */ int8_t status_out; pipe_state_t pipe0; @@ -350,7 +352,7 @@ static void USBC_INT_DisableRxEp(u8 ep_index) * INTERNAL FUNCTION DECLARATION *------------------------------------------------------------------*/ -static dcd_data_t _dcd; +CFG_TUD_MEM_ALIGN static dcd_data_t _dcd; static inline free_block_t *find_containing_block(free_block_t *beg, free_block_t *end, uint_fast16_t addr) { @@ -560,7 +562,7 @@ static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigne static void process_setup_packet(uint8_t rhport) { - uint32_t *p = (uint32_t*)&_dcd.setup_packet; + uint32_t *p = (uint32_t*)(uintptr_t) &_dcd.setup_packet; p[0] = USBC_Readl(USBC_REG_EPFIFO0(USBC0_BASE)); p[1] = USBC_Readl(USBC_REG_EPFIFO0(USBC0_BASE)); @@ -594,7 +596,7 @@ static bool handle_xfer_in(uint_fast8_t ep_addr) if (len) { volatile void* addr = (volatile void*)(USBC_REG_EPFIFO1(USBC0_BASE) + (epnum_minus1 << 2)); if (_dcd.pipe_buf_is_fifo[TUSB_DIR_IN] & TU_BIT(epnum_minus1)) { - pipe_read_write_packet_ff((tu_fifo_t *)buf, addr, len, TUSB_DIR_IN); + pipe_read_write_packet_ff((tu_fifo_t *)(uintptr_t) buf, addr, len, TUSB_DIR_IN); } else { pipe_write_packet(buf, addr, len); pipe->buf = buf + len; @@ -622,7 +624,7 @@ static bool handle_xfer_out(uint_fast8_t ep_addr) if (len) { volatile void* addr = (volatile void*)(USBC_REG_EPFIFO1(USBC0_BASE) + (epnum_minus1 << 2)); if (_dcd.pipe_buf_is_fifo[TUSB_DIR_OUT] & TU_BIT(epnum_minus1)) { - pipe_read_write_packet_ff((tu_fifo_t *)buf, addr, len, TUSB_DIR_OUT); + pipe_read_write_packet_ff((tu_fifo_t *)(uintptr_t )buf, addr, len, TUSB_DIR_OUT); } else { pipe_read_packet(buf, addr, len); pipe->buf = buf + len; -- cgit v1.3.1 From 82547372d1a83f03d137a20f71b2d60a5702a75a Mon Sep 17 00:00:00 2001 From: Hardy Griech Date: Mon, 6 May 2024 08:42:08 +0200 Subject: edpt_dma_start() is called during interrupt time as well, dcd_edpt_xfer() needs DI/EI at one point --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 2fe721d6b..805eb1dda 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -77,6 +77,18 @@ #endif #endif +/** disable interrupts */ +#define DISABLE_IRQ() \ + uint32_t prim = __get_PRIMASK(); \ + __disable_irq(); + +/** (re)enable interrupts */ +#define ENABLE_IRQ() \ + if (!prim) \ + { \ + __enable_irq(); \ + } + /*------------------------------------------------------------------*/ /* MACRO TYPEDEF CONSTANT ENUM *------------------------------------------------------------------*/ @@ -147,7 +159,7 @@ static void start_dma(volatile uint32_t* reg_startep) { static void edpt_dma_start(volatile uint32_t* reg_startep) { if (atomic_flag_test_and_set(&_dcd.dma_running)) { - usbd_defer_func((osal_task_func_t)(uintptr_t ) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); + usbd_defer_func((osal_task_func_t)(uintptr_t ) edpt_dma_start, (void*) (uintptr_t) reg_startep, is_in_isr()); } else { start_dma(reg_startep); } @@ -434,11 +446,15 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to bool const control_status = (epnum == 0 && total_bytes == 0 && dir != tu_edpt_dir(NRF_USBD->BMREQUESTTYPE)); if (control_status) { + DISABLE_IRQ(); + // Status Phase also requires EasyDMA has to be available as well !!!! edpt_dma_start(&NRF_USBD->TASKS_EP0STATUS); // The nRF doesn't interrupt on status transmit so we queue up a success response. dcd_event_xfer_complete(0, ep_addr, 0, XFER_RESULT_SUCCESS, is_in_isr()); + + ENABLE_IRQ(); } else if (dir == TUSB_DIR_OUT) { xfer->started = true; if (epnum == 0) { -- cgit v1.3.1 From a9f1c62dffc2cb0229767959173f78eec9931db0 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 6 May 2024 17:28:48 +0700 Subject: temp fix for mm32 redundant-decls of SystemCoreClock --- hw/bsp/mm32/family.c | 24 ++++++++++++++++-------- src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c | 11 +++++++++++ 2 files changed, 27 insertions(+), 8 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/mm32/family.c b/hw/bsp/mm32/family.c index f22fd90a1..f0fd6d334 100644 --- a/hw/bsp/mm32/family.c +++ b/hw/bsp/mm32/family.c @@ -30,6 +30,21 @@ #include "bsp/board_api.h" #include "board.h" +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +#ifdef __GNUC__ // caused by extra declaration of SystemCoreClock in freeRTOSConfig.h +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + +extern u32 SystemCoreClock; + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -46,19 +61,12 @@ void USB_DeviceClockInit(void) { /* Enable USB clock */ RCC->AHB2ENR |= 0x1 << 7; } -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -extern u32 SystemCoreClock; void board_init(void) { // usb clock USB_DeviceClockInit(); - if (SysTick_Config(SystemCoreClock / 1000)) { - while (1); - } + SysTick_Config(SystemCoreClock / 1000); NVIC_SetPriority(SysTick_IRQn, 0x0); RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index c3d0c7297..d5c0daaeb 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -283,7 +283,18 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) /* Response with status first before changing device address */ dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); } + +#ifdef __GNUC__ // caused by extra declaration of SystemCoreClock in freeRTOSConfig.h +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + extern u32 SystemCoreClock; + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + void dcd_remote_wakeup(uint8_t rhport) { (void) rhport; -- cgit v1.3.1 From 1cab553f4bcb6633face4f50f03192928a68f751 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 9 May 2024 13:55:18 +0200 Subject: Format. --- src/portable/wch/dcd_ch32_usbhs.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'src/portable') diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 41c1d8c7c..68e2179e9 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -135,15 +135,12 @@ void dcd_remote_wakeup(uint8_t rhport) (void) rhport; } -void dcd_sof_enable(uint8_t rhport, bool en) +void dcd_sof_enable(uint8_t rhport, bool en) { (void) rhport; - if (en) - { + if (en) { USBHSD->INT_EN |= USBHS_SOF_ACT_EN; - } - else - { + } else { USBHSD->INT_EN &= ~(USBHS_SOF_ACT_EN); } } @@ -347,6 +344,7 @@ void dcd_int_handler(uint8_t rhport) { if (rx_token == PID_SOF) { dcd_event_sof(rhport, USBHSD->FRAME_NO, true); + } else if (rx_token == PID_OUT) { uint16_t rx_len = USBHSD->RX_LEN; -- cgit v1.3.1 From 9d561410e58ba9efb6ef2bff7b03a2f47dee8d64 Mon Sep 17 00:00:00 2001 From: Hardy Griech Date: Mon, 13 May 2024 18:57:03 +0200 Subject: revert (unverified) second race condition --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 805eb1dda..bb07063d2 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -77,18 +77,6 @@ #endif #endif -/** disable interrupts */ -#define DISABLE_IRQ() \ - uint32_t prim = __get_PRIMASK(); \ - __disable_irq(); - -/** (re)enable interrupts */ -#define ENABLE_IRQ() \ - if (!prim) \ - { \ - __enable_irq(); \ - } - /*------------------------------------------------------------------*/ /* MACRO TYPEDEF CONSTANT ENUM *------------------------------------------------------------------*/ @@ -446,15 +434,11 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to bool const control_status = (epnum == 0 && total_bytes == 0 && dir != tu_edpt_dir(NRF_USBD->BMREQUESTTYPE)); if (control_status) { - DISABLE_IRQ(); - // Status Phase also requires EasyDMA has to be available as well !!!! edpt_dma_start(&NRF_USBD->TASKS_EP0STATUS); // The nRF doesn't interrupt on status transmit so we queue up a success response. dcd_event_xfer_complete(0, ep_addr, 0, XFER_RESULT_SUCCESS, is_in_isr()); - - ENABLE_IRQ(); } else if (dir == TUSB_DIR_OUT) { xfer->started = true; if (epnum == 0) { -- cgit v1.3.1 From e250b82377aa9c1433c6235501c72dd079544c75 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 13 May 2024 22:26:19 +0200 Subject: Adjust logic. --- src/common/tusb_mcu.h | 5 +++-- src/device/dcd.h | 6 +++--- src/device/usbd.c | 20 +++++++++++--------- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 ++-- src/tusb_option.h | 5 +++++ 5 files changed, 24 insertions(+), 16 deletions(-) (limited to 'src/portable') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index e489e93e7..3a7d6ad33 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -195,6 +195,7 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 + #define TUP_USBIP_DWC2_TEST_MODE // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9 #define TUP_DCD_ENDPOINT_MAX 6 @@ -209,7 +210,7 @@ // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS - #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT + #define TUP_USBIP_DWC2_TEST_MODE #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H7) @@ -278,7 +279,7 @@ defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) #define TUP_DCD_ENDPOINT_MAX 9 #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_USBIP_DWC2_TEST_MODE_SUPPORT + #define TUP_USBIP_DWC2_TEST_MODE #else #define TUP_DCD_ENDPOINT_MAX 6 #endif diff --git a/src/device/dcd.h b/src/device/dcd.h index b71b99869..9447d6d9d 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -97,8 +97,7 @@ typedef struct TU_ATTR_ALIGNED(4) { }; } dcd_event_t; -typedef enum _test_mode_selector -{ +typedef enum { TEST_J = 1, TEST_K, TEST_SE0_NAK, @@ -158,12 +157,13 @@ void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; // Enable/Disable Start-of-frame interrupt. Default is disabled void dcd_sof_enable(uint8_t rhport, bool en); +#if CFG_TUD_TEST_MODE // Check if the test mode is supported, returns true is test mode selector is supported bool dcd_check_test_mode_support(test_mode_t test_selector) TU_ATTR_WEAK; // Put device into a test mode (needs power cycle to quit) void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) TU_ATTR_WEAK; - +#endif //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ diff --git a/src/device/usbd.c b/src/device/usbd.c index 7dfdc8476..25d890dc7 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -313,8 +313,9 @@ TU_ATTR_ALWAYS_INLINE static inline bool queue_event(dcd_event_t const * event, static bool process_control_request(uint8_t rhport, tusb_control_request_t const * p_request); static bool process_set_config(uint8_t rhport, uint8_t cfg_num); static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const * p_request); +#if CFG_TUD_TEST_MODE static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); - +#endif // from usbd_control.c void usbd_control_reset(void); void usbd_control_set_request(tusb_control_request_t const *request); @@ -766,16 +767,16 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const tud_control_status(rhport, p_request); break; - #if !defined(TUSB_NO_TEST_MODE_SUPPORT) +#if CFG_TUD_TEST_MODE // Support for TEST_MODE - case TUSB_REQ_FEATURE_TEST_MODE: + case TUSB_REQ_FEATURE_TEST_MODE: { // Only handle the test mode if supported and valid TU_VERIFY(dcd_enter_test_mode && dcd_check_test_mode_support && 0 == tu_u16_low(p_request->wIndex)); uint8_t selector = tu_u16_high(p_request->wIndex); // Stall request if the selected test mode isn't supported - if (!dcd_check_test_mode_support(selector)) + if (!dcd_check_test_mode_support((test_mode_t)selector)) { TU_LOG_USBD(" Unsupported Test Mode (test selector index: %d)\r\n", selector); @@ -788,8 +789,9 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); usbd_control_set_complete_callback(process_test_mode_cb); - break; - #endif /* !TUSB_NO_TEST_MODE_SUPPORT */ + break; + } +#endif /* CFG_TUD_TEST_MODE */ // Stall unsupported feature selector default: return false; @@ -1121,7 +1123,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } } -#if !defined(TUSB_NO_TEST_MODE_SUPPORT) +#if CFG_TUD_TEST_MODE static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) { // At this point it should already be ensured that dcd_enter_test_mode() is defined @@ -1129,11 +1131,11 @@ static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_req // Only enter the test mode after the request for it has completed TU_VERIFY(CONTROL_STAGE_ACK == stage); - dcd_enter_test_mode(rhport, tu_u16_high(request->wIndex)); + dcd_enter_test_mode(rhport, (test_mode_t)tu_u16_high(request->wIndex)); return true; } -#endif /* !TUSB_NO_TEST_MODE_SUPPORT */ +#endif /* CFG_TUD_TEST_MODE */ //--------------------------------------------------------------------+ // DCD Event Handler diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index c9580655f..fd2f08453 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1195,7 +1195,7 @@ void dcd_int_handler(uint8_t rhport) { // } } -#if defined(TUP_USBIP_DWC2_TEST_MODE_SUPPORT) && !defined(TUSB_NO_TEST_MODE_SUPPORT) +#if defined(TUP_USBIP_DWC2_TEST_MODE) && CFG_TUD_TEST_MODE bool dcd_check_test_mode_support(test_mode_t test_selector) { // Check if test mode selector is unsupported @@ -1218,6 +1218,6 @@ void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (test_selector << DCTL_TCTL_Pos); } -#endif /* TUP_USBIP_DWC2_TEST_MODE_SUPPORT && !TUSB_NO_TEST_MODE_SUPPORT */ +#endif /* TUP_USBIP_DWC2_TEST_MODE && CFG_TUD_TEST_MODE */ #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 8d5527936..058427e0e 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -364,6 +364,11 @@ #define CFG_TUD_INTERFACE_MAX 16 #endif +// USB 2.0 compliance test mode support +#ifndef CFG_TUD_TEST_MODE + #define CFG_TUD_TEST_MODE 0 +#endif + //------------- Device Class Driver -------------// #ifndef CFG_TUD_BTH #define CFG_TUD_BTH 0 -- cgit v1.3.1 From ad734e658cc9e39021a93fc21e077f1b1709c0ff Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Mon, 13 May 2024 22:27:33 +0200 Subject: Remove dead code. --- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index fd2f08453..dbcd586c5 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1207,10 +1207,6 @@ bool dcd_check_test_mode_support(test_mode_t test_selector) { } void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { - // Disable test mode if not supported as a fall back - if (!dcd_check_test_mode_support(test_selector)) { - test_selector = 0; - } // Get port address... dwc2_regs_t* dwc2 = DWC2_REG(rhport); -- cgit v1.3.1 From aa2685536ba9e2fbbe3f350a5bb3c6709e586722 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 May 2024 16:00:15 +0700 Subject: implement max3421e hcd_edpt_abort_xfer() --- hw/bsp/nrf/family.cmake | 10 ++++ src/portable/analog/max3421/hcd_max3421.c | 80 +++++++++++++++++-------------- 2 files changed, 54 insertions(+), 36 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 5de69a8a3..9e86374dc 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -101,6 +101,15 @@ endfunction() #------------------------------------ # Functions #------------------------------------ + +#function(family_flash_adafruit_nrfutil TARGET) +# add_custom_target(${TARGET}-adafruit-nrfutil +# DEPENDS ${TARGET} +# COMMAND adafruit-nrfutil --verbose dfu serial --package $^ -p /dev/ttyACM0 -b 115200 --singlebank --touch 1200 +# ) +#endfunction() + + function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) @@ -133,4 +142,5 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_jlink(${TARGET}) +# family_flash_adafruit_nrfutil(${TARGET}) endfunction() diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 4dc93d2d8..d9b8e1fc3 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -174,7 +174,8 @@ enum { enum { EP_STATE_IDLE = 0, EP_STATE_COMPLETE = 1, - EP_STATE_ATTEMPT_1 = 2, // pending 1st attempt + EP_STATE_ABORTING = 2, + EP_STATE_ATTEMPT_1 = 3, // pending 1st attempt EP_STATE_ATTEMPT_MAX = 15 }; @@ -459,6 +460,7 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { tuh_configure_param_t const* cfg = (tuh_configure_param_t const*) cfg_param; _tuh_cfg = cfg->max3421; + _tuh_cfg.max_nak = tu_min8(_tuh_cfg.max_nak, EP_STATE_ATTEMPT_MAX-EP_STATE_ATTEMPT_1); return true; } @@ -678,7 +680,6 @@ static void xact_generic(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { uint8_t const ep_num = tu_edpt_number(ep_addr); uint8_t const ep_dir = (uint8_t) tu_edpt_dir(ep_addr); - max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir); TU_VERIFY(ep); @@ -702,14 +703,19 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buf return true; } -// Abort a queued transfer. Note: it can only abort transfer that has not been started -// Return true if a queued transfer is aborted, false if there is no transfer to abort -bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + uint8_t const ep_num = tu_edpt_number(ep_addr); + uint8_t const ep_dir = (uint8_t) tu_edpt_dir(ep_addr); + max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir); + TU_VERIFY(ep); - return false; + if (EP_STATE_ATTEMPT_1 <= ep->state && ep->state < EP_STATE_ATTEMPT_MAX) { + hcd_int_disable(rhport); + ep->state = EP_STATE_ABORTING; + hcd_int_enable(rhport); + } + + return true; } // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked @@ -819,7 +825,6 @@ static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t re static void handle_xfer_done(uint8_t rhport, bool in_isr) { uint8_t const hrsl = reg_read(rhport, HRSL_ADDR, in_isr); uint8_t const hresult = hrsl & HRSL_RESULT_MASK; - uint8_t const ep_num = _hcd_data.hxfr & HXFR_EPNUM_MASK; uint8_t const hxfr_type = _hcd_data.hxfr & 0xf0; uint8_t const ep_dir = ((hxfr_type & HXFR_SETUP) || (hxfr_type & HXFR_OUT_NIN)) ? 0 : 1; @@ -829,34 +834,30 @@ static void handle_xfer_done(uint8_t rhport, bool in_isr) { xfer_result_t xfer_result; switch(hresult) { - case HRSL_SUCCESS: - xfer_result = XFER_RESULT_SUCCESS; - break; - - case HRSL_STALL: - xfer_result = XFER_RESULT_STALLED; - break; - case HRSL_NAK: - if (ep_num == 0) { - // control endpoint -> retry immediately - hxfr_write(rhport, _hcd_data.hxfr, in_isr); + if (ep->state == EP_STATE_ABORTING) { + ep->state = EP_STATE_IDLE; } else { - if (ep->state < EP_STATE_ATTEMPT_MAX) { + if (ep_num == 0) { + // control endpoint -> retry immediately and return + hxfr_write(rhport, _hcd_data.hxfr, in_isr); + return; + } else if (EP_STATE_ATTEMPT_1 <= ep->state && ep->state < EP_STATE_ATTEMPT_MAX) { ep->state++; } + } - max3421_ep_t * next_ep = find_next_pending_ep(ep); - if (ep == next_ep) { - // this endpoint is only one pending -> retry immediately - hxfr_write(rhport, _hcd_data.hxfr, in_isr); - } else if (next_ep) { - // switch to next pending endpoint TODO could have issue with double buffered if not clear previously out data - xact_generic(rhport, next_ep, true, in_isr); - } else { - // no more pending in this frame -> clear busy - atomic_flag_clear(&_hcd_data.busy); - } + max3421_ep_t * next_ep = find_next_pending_ep(ep); + if (ep == next_ep) { + // this endpoint is only one pending -> retry immediately + hxfr_write(rhport, _hcd_data.hxfr, in_isr); + } else if (next_ep) { + // switch to next pending endpoint + // TODO could have issue with double buffered if not clear previously out data + xact_generic(rhport, next_ep, true, in_isr); + } else { + // no more pending in this frame -> clear busy + atomic_flag_clear(&_hcd_data.busy); } return; @@ -864,6 +865,14 @@ static void handle_xfer_done(uint8_t rhport, bool in_isr) { // occurred when initialized without any pending transfer. Skip for now return; + case HRSL_SUCCESS: + xfer_result = XFER_RESULT_SUCCESS; + break; + + case HRSL_STALL: + xfer_result = XFER_RESULT_STALLED; + break; + default: TU_LOG3("HRSL: %02X\r\n", hrsl); xfer_result = XFER_RESULT_FAILED; @@ -942,9 +951,8 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { if (hirq & HIRQ_FRAME_IRQ) { _hcd_data.frame_count++; + // reset all endpoints nak counter, retry with 1st pending ep. max3421_ep_t* ep_retry = NULL; - - // reset all endpoints attempt counter for (size_t i = 0; i < CFG_TUH_MAX3421_ENDPOINT_TOTAL; i++) { max3421_ep_t* ep = &_hcd_data.ep[i]; if (ep->packet_size && ep->state > EP_STATE_ATTEMPT_1) { @@ -1004,7 +1012,7 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { // clear all interrupt except SNDBAV_IRQ (never clear by us). Note RCVDAV_IRQ, HXFRDN_IRQ already clear while processing hirq &= (uint8_t) ~HIRQ_SNDBAV_IRQ; - if ( hirq ) { + if (hirq) { hirq_write(rhport, hirq, in_isr); } } -- cgit v1.3.1 From db60fa1c63ae58c205e43e144253dab6815bb2d1 Mon Sep 17 00:00:00 2001 From: Matthew Tran Date: Sun, 19 Nov 2023 18:26:40 -0800 Subject: add CH32V20x USB OTG/FS driver --- .gitignore | 1 + README.rst | 2 +- docs/reference/dependencies.rst | 1 + docs/reference/supported.rst | 6 +- examples/device/cdc_msc_freertos/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 1 + examples/device/msc_dual_lun/skip.txt | 1 + examples/device/video_capture/skip.txt | 1 + hw/bsp/ch32v20x/boards/nanoch32v203/board.h | 17 + hw/bsp/ch32v20x/boards/nanoch32v203/board.mk | 5 + hw/bsp/ch32v20x/ch32v20x_conf.h | 36 + hw/bsp/ch32v20x/ch32v20x_it.h | 15 + hw/bsp/ch32v20x/core_riscv.h | 572 ++++++++++++++ hw/bsp/ch32v20x/family.c | 82 ++ hw/bsp/ch32v20x/family.mk | 50 ++ hw/bsp/ch32v20x/system_ch32v20x.c | 976 ++++++++++++++++++++++++ hw/bsp/ch32v20x/system_ch32v20x.h | 29 + hw/bsp/ch32v20x/wch-riscv.cfg | 18 + hw/bsp/ch32v307/family.mk | 5 + hw/bsp/fomu/family.mk | 4 + hw/bsp/gd32vf103/family.mk | 5 + src/class/video/video_device.c | 2 +- src/common/tusb_mcu.h | 4 + src/portable/wch/ch32_usbfs_reg.h | 77 ++ src/portable/wch/dcd_ch32_usbfs.c | 304 ++++++++ src/tusb_option.h | 1 + tools/get_deps.py | 3 + tools/iar_template.ipcf | 1 + 28 files changed, 2215 insertions(+), 5 deletions(-) create mode 100644 hw/bsp/ch32v20x/boards/nanoch32v203/board.h create mode 100644 hw/bsp/ch32v20x/boards/nanoch32v203/board.mk create mode 100644 hw/bsp/ch32v20x/ch32v20x_conf.h create mode 100644 hw/bsp/ch32v20x/ch32v20x_it.h create mode 100644 hw/bsp/ch32v20x/core_riscv.h create mode 100644 hw/bsp/ch32v20x/family.c create mode 100644 hw/bsp/ch32v20x/family.mk create mode 100644 hw/bsp/ch32v20x/system_ch32v20x.c create mode 100644 hw/bsp/ch32v20x/system_ch32v20x.h create mode 100644 hw/bsp/ch32v20x/wch-riscv.cfg create mode 100644 src/portable/wch/ch32_usbfs_reg.h create mode 100644 src/portable/wch/dcd_ch32_usbfs.c (limited to 'src/portable') diff --git a/.gitignore b/.gitignore index 56ae7600f..7a37d65dc 100644 --- a/.gitignore +++ b/.gitignore @@ -82,6 +82,7 @@ hw/mcu/st/stm32l5xx_hal_driver hw/mcu/st/stm32u5xx_hal_driver hw/mcu/st/stm32wbxx_hal_driver hw/mcu/ti +hw/mcu/wch/ch32v20x hw/mcu/wch/ch32v307 hw/mcu/wch/ch32f20x lib/CMSIS_5 diff --git a/README.rst b/README.rst index 8c3145d33..dbe75adc8 100644 --- a/README.rst +++ b/README.rst @@ -157,7 +157,7 @@ Following CPUs are supported, check out `Supported Devices`_ for comprehensive l +--------------+------------------------------------------------------------+ | ValentyUSB | eptri | +--------------+------------------------------------------------------------+ -| WCH | CH32F20x, CH32V307, | +| WCH | CH32F20x, CH32V20x, CH32V307 | +--------------+------------------------------------------------------------+ License diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index 6ba6692e9..3a98594ff 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -55,6 +55,7 @@ hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/ hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c123 hw/mcu/wch/ch32f20x https://github.com/openwch/ch32f20x.git 77c4095087e5ed2c548ec9058e655d0b8757663b ch32f20x +hw/mcu/wch/ch32v20x https://github.com/openwch/ch32v20x.git de6d68c654340d7f27b00cebbfc9aa2740a1abc2 ch32v20x hw/mcu/wch/ch32v307 https://github.com/openwch/ch32v307.git 17761f5cf9dbbf2dcf665b7c04934188add20082 ch32v307 lib/CMSIS_5 https://github.com/ARM-software/CMSIS_5.git 20285262657d1b482d132d20d755c8c330d55c1f imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2xstm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb lib/FreeRTOS-Kernel https://github.com/FreeRTOS/FreeRTOS-Kernel.git 4ff01a7a4a51f53b44496aefee1e3c0071b7b173 all diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 7e7be25a4..3ca203e88 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -128,9 +128,9 @@ Supported MCUs +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ -| WCH | CH32V307 | ✔ | | ✔ | ch32v307 | | -| +-----------------------+--------+------+-----------+-------------------+--------------+ -| | CH32F20x | ✔ | | ✔ | ch32f205 | | +| WCH | CH32F20x | ✔ | | ✔ | ch32f205 | | +| | CH32V20x | ✔ | | ✖ | ch32v20x | | +| | CH32V307 | ✔ | | ✔ | ch32v307 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index eb434c23b..457ddb760 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index a6f96b288..6aaa27661 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/msc_dual_lun/skip.txt b/examples/device/msc_dual_lun/skip.txt index a9e3a99b1..4d607dc05 100644 --- a/examples/device/msc_dual_lun/skip.txt +++ b/examples/device/msc_dual_lun/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:SAMD11 mcu:MKL25ZXX family:espressif diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index 5898664a2..714cabeec 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.h b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h new file mode 100644 index 000000000..c8d28d90f --- /dev/null +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.h @@ -0,0 +1,17 @@ +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_PORT GPIOA +#define LED_PIN GPIO_Pin_15 +#define LED_STATE_ON 0 +#define LED_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE) + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.mk b/hw/bsp/ch32v20x/boards/nanoch32v203/board.mk new file mode 100644 index 000000000..75dc05457 --- /dev/null +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.mk @@ -0,0 +1,5 @@ +CFLAGS += \ + -DCH32V20x_D6 + +SRC_S += \ + $(CH32V20X_SDK_SRC)/Startup/startup_ch32v20x_D6.S diff --git a/hw/bsp/ch32v20x/ch32v20x_conf.h b/hw/bsp/ch32v20x/ch32v20x_conf.h new file mode 100644 index 000000000..949297fe6 --- /dev/null +++ b/hw/bsp/ch32v20x/ch32v20x_conf.h @@ -0,0 +1,36 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_conf.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : Library configuration file. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_CONF_H +#define __CH32V20x_CONF_H + +#include "ch32v20x_adc.h" +#include "ch32v20x_bkp.h" +#include "ch32v20x_can.h" +#include "ch32v20x_crc.h" +#include "ch32v20x_dbgmcu.h" +#include "ch32v20x_dma.h" +#include "ch32v20x_exti.h" +#include "ch32v20x_flash.h" +#include "ch32v20x_gpio.h" +#include "ch32v20x_i2c.h" +#include "ch32v20x_iwdg.h" +#include "ch32v20x_pwr.h" +#include "ch32v20x_rcc.h" +#include "ch32v20x_rtc.h" +#include "ch32v20x_spi.h" +#include "ch32v20x_tim.h" +#include "ch32v20x_usart.h" +#include "ch32v20x_wwdg.h" +#include "ch32v20x_it.h" +#include "ch32v20x_misc.h" + +#endif /* __CH32V20x_CONF_H */ diff --git a/hw/bsp/ch32v20x/ch32v20x_it.h b/hw/bsp/ch32v20x/ch32v20x_it.h new file mode 100644 index 000000000..e49c61ae2 --- /dev/null +++ b/hw/bsp/ch32v20x/ch32v20x_it.h @@ -0,0 +1,15 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v20x_it.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : This file contains the headers of the interrupt handlers. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V20x_IT_H +#define __CH32V20x_IT_H + +#endif /* __CH32V20x_IT_H */ diff --git a/hw/bsp/ch32v20x/core_riscv.h b/hw/bsp/ch32v20x/core_riscv.h new file mode 100644 index 000000000..be1b52a6c --- /dev/null +++ b/hw/bsp/ch32v20x/core_riscv.h @@ -0,0 +1,572 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : core_riscv.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : RISC-V Core Peripheral Access Layer Header File for CH32V20x +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CORE_RISCV_H__ +#define __CORE_RISCV_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* IO definitions */ +#ifdef __cplusplus + #define __I volatile /* defines 'read only' permissions */ +#else + #define __I volatile const /* defines 'read only' permissions */ +#endif +#define __O volatile /* defines 'write only' permissions */ +#define __IO volatile /* defines 'read / write' permissions */ + +/* Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef __I uint64_t vuc64; /* Read Only */ +typedef __I uint32_t vuc32; /* Read Only */ +typedef __I uint16_t vuc16; /* Read Only */ +typedef __I uint8_t vuc8; /* Read Only */ + +typedef const uint64_t uc64; /* Read Only */ +typedef const uint32_t uc32; /* Read Only */ +typedef const uint16_t uc16; /* Read Only */ +typedef const uint8_t uc8; /* Read Only */ + +typedef __I int64_t vsc64; /* Read Only */ +typedef __I int32_t vsc32; /* Read Only */ +typedef __I int16_t vsc16; /* Read Only */ +typedef __I int8_t vsc8; /* Read Only */ + +typedef const int64_t sc64; /* Read Only */ +typedef const int32_t sc32; /* Read Only */ +typedef const int16_t sc16; /* Read Only */ +typedef const int8_t sc8; /* Read Only */ + +typedef __IO uint64_t vu64; +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef uint64_t u64; +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef __IO int64_t vs64; +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef int64_t s64; +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef enum {NoREADY = 0, READY = !NoREADY} ErrorStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +#define RV_STATIC_INLINE static inline + +/* memory mapped structure for Program Fast Interrupt Controller (PFIC) */ +typedef struct{ + __I uint32_t ISR[8]; + __I uint32_t IPR[8]; + __IO uint32_t ITHRESDR; + __IO uint32_t RESERVED; + __IO uint32_t CFGR; + __I uint32_t GISR; + __IO uint8_t VTFIDR[4]; + uint8_t RESERVED0[12]; + __IO uint32_t VTFADDR[4]; + uint8_t RESERVED1[0x90]; + __O uint32_t IENR[8]; + uint8_t RESERVED2[0x60]; + __O uint32_t IRER[8]; + uint8_t RESERVED3[0x60]; + __O uint32_t IPSR[8]; + uint8_t RESERVED4[0x60]; + __O uint32_t IPRR[8]; + uint8_t RESERVED5[0x60]; + __IO uint32_t IACTR[8]; + uint8_t RESERVED6[0xE0]; + __IO uint8_t IPRIOR[256]; + uint8_t RESERVED7[0x810]; + __IO uint32_t SCTLR; +}PFIC_Type; + +/* memory mapped structure for SysTick */ +typedef struct +{ + __IO uint32_t CTLR; + __IO uint32_t SR; + __IO uint64_t CNT; + __IO uint64_t CMP; +}SysTick_Type; + +#define PFIC ((PFIC_Type *) 0xE000E000 ) +#define NVIC PFIC +#define NVIC_KEY1 ((uint32_t)0xFA050000) +#define NVIC_KEY2 ((uint32_t)0xBCAF0000) +#define NVIC_KEY3 ((uint32_t)0xBEEF0000) + +#define SysTick ((SysTick_Type *) 0xE000F000) + +/********************************************************************* + * @fn __enable_irq + * + * @brief Enable Global Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __enable_irq(void) +{ + __asm volatile ("csrw 0x800, %0" : : "r" (0x6088) ); +} + +/********************************************************************* + * @fn __disable_irq + * + * @brief Disable Global Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __disable_irq(void) +{ + __asm volatile ("csrw 0x800, %0" : : "r" (0x6000) ); +} + +/********************************************************************* + * @fn __NOP + * + * @brief nop + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __NOP(void) +{ + __asm volatile ("nop"); +} + +/********************************************************************* + * @fn NVIC_EnableIRQ + * + * @brief Disable Interrupt + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->IENR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_DisableIRQ + * + * @brief Disable Interrupt + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->IRER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_GetStatusIRQ + * + * @brief Get Interrupt Enable State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Pending Enable + * 0 - Interrupt Pending Disable + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetStatusIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_GetPendingIRQ + * + * @brief Get Interrupt Pending State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Pending Enable + * 0 - Interrupt Pending Disable + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->IPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_SetPendingIRQ + * + * @brief Set Interrupt Pending + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->IPSR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_ClearPendingIRQ + * + * @brief Clear Interrupt Pending + * + * @param IRQn - Interrupt Numbers + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->IPRR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); +} + +/********************************************************************* + * @fn NVIC_GetActive + * + * @brief Get Interrupt Active State + * + * @param IRQn - Interrupt Numbers + * + * @return 1 - Interrupt Active + * 0 - Interrupt No Active + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IACTR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); +} + +/********************************************************************* + * @fn NVIC_SetPriority + * + * @brief Set Interrupt Priority + * + * @param IRQn - Interrupt Numbers + * priority - bit7 - Pre-emption Priority + * bit[6:5] - Subpriority + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint8_t priority) +{ + NVIC->IPRIOR[(uint32_t)(IRQn)] = priority; +} + +/********************************************************************* + * @fn __WFI + * + * @brief Wait for Interrupt + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFI(void) +{ + NVIC->SCTLR &= ~(1<<3); // wfi + asm volatile ("wfi"); +} + +/********************************************************************* + * @fn _SEV + * + * @brief Set Event + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _SEV(void) +{ + uint32_t t; + + t = NVIC->SCTLR; + NVIC->SCTLR |= (1<<3)|(1<<5); + NVIC->SCTLR = (NVIC->SCTLR & ~(1<<5)) | ( t & (1<<5)); +} + +/********************************************************************* + * @fn _WFE + * + * @brief Wait for Events + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _WFE(void) +{ + NVIC->SCTLR |= (1<<3); + asm volatile ("wfi"); +} + +/********************************************************************* + * @fn __WFE + * + * @brief Wait for Events + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFE(void) +{ + _SEV(); + _WFE(); + _WFE(); +} + +/********************************************************************* + * @fn SetVTFIRQ + * + * @brief Set VTF Interrupt + * + * @param addr - VTF interrupt service function base address. + * IRQn - Interrupt Numbers + * num - VTF Interrupt Numbers + * NewState - DISABLE or ENABLE + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void SetVTFIRQ(uint32_t addr, IRQn_Type IRQn, uint8_t num, FunctionalState NewState){ + if(num > 3) return ; + + if (NewState != DISABLE) + { + NVIC->VTFIDR[num] = IRQn; + NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)|0x1); + } + else{ + NVIC->VTFIDR[num] = IRQn; + NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)&(~0x1)); + } +} + +/********************************************************************* + * @fn NVIC_SystemReset + * + * @brief Initiate a system reset request + * + * @return none + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SystemReset(void) +{ + NVIC->CFGR = NVIC_KEY3|(1<<7); +} + +/********************************************************************* + * @fn __AMOADD_W + * + * @brief Atomic Add with 32bit value + * Atomically ADD 32bit value with value in memory using amoadd.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ADDed + * + * @return return memory value + add value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOADD_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoadd.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOAND_W + * + * @brief Atomic And with 32bit value + * Atomically AND 32bit value with value in memory using amoand.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ANDed + * + * @return return memory value & and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOAND_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoand.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMAX_W + * + * @brief Atomic signed MAX with 32bit value + * Atomically signed max compare 32bit value with value in memory using amomax.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the bigger value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMAX_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amomax.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMAXU_W + * + * @brief Atomic unsigned MAX with 32bit value + * Atomically unsigned max compare 32bit value with value in memory using amomaxu.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return return the bigger value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMAXU_W(volatile uint32_t *addr, uint32_t value) +{ + uint32_t result; + + __asm volatile ("amomaxu.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMIN_W + * + * @brief Atomic signed MIN with 32bit value + * Atomically signed min compare 32bit value with value in memory using amomin.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the smaller value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMIN_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amomin.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOMINU_W + * + * @brief Atomic unsigned MIN with 32bit value + * Atomically unsigned min compare 32bit value with value in memory using amominu.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be compared + * + * @return the smaller value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMINU_W(volatile uint32_t *addr, uint32_t value) +{ + uint32_t result; + + __asm volatile ("amominu.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOOR_W + * + * @brief Atomic OR with 32bit value + * Atomically OR 32bit value with value in memory using amoor.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be ORed + * + * @return return memory value | and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOOR_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoor.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/********************************************************************* + * @fn __AMOSWAP_W + * + * @brief Atomically swap new 32bit value into memory using amoswap.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * newval - New value to be stored into the address + * + * @return return the original value in memory + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOSWAP_W(volatile uint32_t *addr, uint32_t newval) +{ + uint32_t result; + + __asm volatile ("amoswap.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(newval) : "memory"); + return result; +} + +/********************************************************************* + * @fn __AMOXOR_W + * + * @brief Atomic XOR with 32bit value + * Atomically XOR 32bit value with value in memory using amoxor.d. + * + * @param addr - Address pointer to data, address need to be 4byte aligned + * value - value to be XORed + * + * @return return memory value ^ and value + */ +__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOXOR_W(volatile int32_t *addr, int32_t value) +{ + int32_t result; + + __asm volatile ("amoxor.w %0, %2, %1" : \ + "=r"(result), "+A"(*addr) : "r"(value) : "memory"); + return *addr; +} + +/* Core_Exported_Functions */ +extern uint32_t __get_MSTATUS(void); +extern void __set_MSTATUS(uint32_t value); +extern uint32_t __get_MISA(void); +extern void __set_MISA(uint32_t value); +extern uint32_t __get_MTVEC(void); +extern void __set_MTVEC(uint32_t value); +extern uint32_t __get_MSCRATCH(void); +extern void __set_MSCRATCH(uint32_t value); +extern uint32_t __get_MEPC(void); +extern void __set_MEPC(uint32_t value); +extern uint32_t __get_MCAUSE(void); +extern void __set_MCAUSE(uint32_t value); +extern uint32_t __get_MTVAL(void); +extern void __set_MTVAL(uint32_t value); +extern uint32_t __get_MVENDORID(void); +extern uint32_t __get_MARCHID(void); +extern uint32_t __get_MIMPID(void); +extern uint32_t __get_MHARTID(void); +extern uint32_t __get_SP(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c new file mode 100644 index 000000000..247dacde6 --- /dev/null +++ b/hw/bsp/ch32v20x/family.c @@ -0,0 +1,82 @@ +#include +#include "ch32v20x.h" +#include "bsp/board_api.h" +#include "board.h" + +__attribute__((interrupt)) +void USBHD_IRQHandler(void) { + tud_int_handler(0); +} + +#if CFG_TUSB_OS == OPT_OS_NONE + +volatile uint32_t system_ticks = 0; + +__attribute__((interrupt)) +void SysTick_Handler(void) { + SysTick->SR = 0; + system_ticks++; +} + +uint32_t SysTick_Config(uint32_t ticks) { + NVIC_EnableIRQ(SysTicK_IRQn); + SysTick->CTLR = 0; + SysTick->SR = 0; + SysTick->CNT = 0; + SysTick->CMP = ticks-1; + SysTick->CTLR = 0xF; + return 0; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void board_init(void) { + __disable_irq(); + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(SystemCoreClock / 1000); +#endif + + switch (SystemCoreClock) { + case 48000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); break; + case 96000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div2); break; + case 144000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div3); break; + default: TU_ASSERT(0,); break; + } + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); + + LED_CLOCK_EN(); + GPIO_InitTypeDef GPIO_InitStructure = { + .GPIO_Pin = LED_PIN, + .GPIO_Mode = GPIO_Mode_Out_OD, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(LED_PORT, &GPIO_InitStructure); + + __enable_irq(); + board_delay(2); +} + +void board_led_write(bool state) { + GPIO_WriteBit(LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) { + return false; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + (void) buf; + (void) len; + return len; +} diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk new file mode 100644 index 000000000..2d94f19fb --- /dev/null +++ b/hw/bsp/ch32v20x/family.mk @@ -0,0 +1,50 @@ +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +CROSS_COMPILE ?= riscv-none-elf- + +# Submodules +CH32V20X_SDK = hw/mcu/wch/ch32v20x +DEPS_SUBMODULES += $(CH32V20X_SDK) + +# WCH-SDK paths +CH32V20X_SDK_SRC = $(CH32V20X_SDK)/EVT/EXAM/SRC + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -march=rv32imac_zicsr \ + -mabi=ilp32 \ + -mcmodel=medany \ + -ffunction-sections \ + -fdata-sections \ + -ffat-lto-objects \ + -flto \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_CH32V20X \ + -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED \ + +LDFLAGS_GCC += \ + -Wl,--gc-sections \ + -specs=nosys.specs \ + -specs=nano.specs \ + +LD_FILE = $(CH32V20X_SDK_SRC)/Ld/Link.ld + +SRC_C += \ + src/portable/wch/dcd_ch32_usbfs.c \ + $(CH32V20X_SDK_SRC)/Core/core_riscv.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_gpio.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_misc.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_rcc.c \ + $(CH32V20X_SDK_SRC)/Peripheral/src/ch32v20x_usart.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(CH32V20X_SDK_SRC)/Peripheral/inc \ + +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V + +# wch-link is not supported yet in official openOCD yet. We need to either use +# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or +# 2. compiled from modified source https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +flash: $(BUILD)/$(PROJECT).elf + openocd -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit diff --git a/hw/bsp/ch32v20x/system_ch32v20x.c b/hw/bsp/ch32v20x/system_ch32v20x.c new file mode 100644 index 000000000..588f3165a --- /dev/null +++ b/hw/bsp/ch32v20x/system_ch32v20x.c @@ -0,0 +1,976 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v20x.c + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : CH32V20x Device Peripheral Access Layer System Source File. + * For HSE = 32Mhz (CH32V208x/CH32V203RBT6) + * For HSE = 8Mhz (other CH32V203x) +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v20x.h" + +/* +* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after +* reset the HSI is used as SYSCLK source). +* If none of the define below is enabled, the HSI is used as System clock source. +*/ +//#define SYSCLK_FREQ_HSE HSE_VALUE +//#define SYSCLK_FREQ_48MHz_HSE 48000000 +//#define SYSCLK_FREQ_56MHz_HSE 56000000 +//#define SYSCLK_FREQ_72MHz_HSE 72000000 +#define SYSCLK_FREQ_96MHz_HSE 96000000 +//#define SYSCLK_FREQ_120MHz_HSE 120000000 +//#define SYSCLK_FREQ_144MHz_HSE 144000000 +//#define SYSCLK_FREQ_HSI HSI_VALUE +//#define SYSCLK_FREQ_48MHz_HSI 48000000 +//#define SYSCLK_FREQ_56MHz_HSI 56000000 +//#define SYSCLK_FREQ_72MHz_HSI 72000000 +//#define SYSCLK_FREQ_96MHz_HSI 96000000 +//#define SYSCLK_FREQ_120MHz_HSI 120000000 +//#define SYSCLK_FREQ_144MHz_HSI 144000000 + +/* Clock Definitions */ +#ifdef SYSCLK_FREQ_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_96MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_96MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_120MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_120MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_144MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_144MHz_HSI; /* System Clock Frequency (Core Clock) */ +#else +uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */ + +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/* system_private_function_proto_types */ +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE +static void SetSysClockToHSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSE +static void SetSysClockTo48_HSE( void ); +#elif defined SYSCLK_FREQ_56MHz_HSE +static void SetSysClockTo56_HSE( void ); +#elif defined SYSCLK_FREQ_72MHz_HSE +static void SetSysClockTo72_HSE( void ); +#elif defined SYSCLK_FREQ_96MHz_HSE +static void SetSysClockTo96_HSE( void ); +#elif defined SYSCLK_FREQ_120MHz_HSE +static void SetSysClockTo120_HSE( void ); +#elif defined SYSCLK_FREQ_144MHz_HSE +static void SetSysClockTo144_HSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSI +static void SetSysClockTo48_HSI( void ); +#elif defined SYSCLK_FREQ_56MHz_HSI +static void SetSysClockTo56_HSI( void ); +#elif defined SYSCLK_FREQ_72MHz_HSI +static void SetSysClockTo72_HSI( void ); +#elif defined SYSCLK_FREQ_96MHz_HSI +static void SetSysClockTo96_HSI( void ); +#elif defined SYSCLK_FREQ_120MHz_HSI +static void SetSysClockTo120_HSI( void ); +#elif defined SYSCLK_FREQ_144MHz_HSI +static void SetSysClockTo144_HSI( void ); + +#endif + +/********************************************************************* + * @fn SystemInit + * + * @brief Setup the microcontroller system Initialize the Embedded Flash Interface, + * the PLL and update the SystemCoreClock variable. + * + * @return none + */ +void SystemInit (void) +{ + RCC->CTLR |= (uint32_t)0x00000001; + RCC->CFGR0 &= (uint32_t)0xF8FF0000; + RCC->CTLR &= (uint32_t)0xFEF6FFFF; + RCC->CTLR &= (uint32_t)0xFFFBFFFF; + RCC->CFGR0 &= (uint32_t)0xFF80FFFF; + RCC->INTR = 0x009F0000; + SetSysClock(); +} + +/********************************************************************* + * @fn SystemCoreClockUpdate + * + * @brief Update SystemCoreClock variable according to Clock Register Values. + * + * @return none + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0; + + tmp = RCC->CFGR0 & RCC_SWS; + + switch (tmp) + { + case 0x00: + SystemCoreClock = HSI_VALUE; + break; + case 0x04: + SystemCoreClock = HSE_VALUE; + break; + case 0x08: + pllmull = RCC->CFGR0 & RCC_PLLMULL; + pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if(pllmull == 17) pllmull = 18; + + if (pllsource == 0x00) + { + if(EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE){ + SystemCoreClock = HSI_VALUE * pllmull; + } + else{ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + } + else + { +#if defined (CH32V20x_D8W) + if((RCC->CFGR0 & (3<<22)) == (3<<22)) + { + SystemCoreClock = ((HSE_VALUE>>1)) * pllmull; + } + else +#endif + if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + SystemCoreClock = ((HSE_VALUE>>2) >> 1) * pllmull; +#else + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; +#endif + } + else + { +#if defined (CH32V20x_D8) || defined (CH32V20x_D8W) + SystemCoreClock = (HSE_VALUE>>2) * pllmull; +#else + SystemCoreClock = HSE_VALUE * pllmull; +#endif + } + } + + if(Pll_6_5 == 1) SystemCoreClock = (SystemCoreClock / 2); + + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; + SystemCoreClock >>= tmp; +} + +/********************************************************************* + * @fn SetSysClock + * + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_48MHz_HSE + SetSysClockTo48_HSE(); +#elif defined SYSCLK_FREQ_56MHz_HSE + SetSysClockTo56_HSE(); +#elif defined SYSCLK_FREQ_72MHz_HSE + SetSysClockTo72_HSE(); +#elif defined SYSCLK_FREQ_96MHz_HSE + SetSysClockTo96_HSE(); +#elif defined SYSCLK_FREQ_120MHz_HSE + SetSysClockTo120_HSE(); +#elif defined SYSCLK_FREQ_144MHz_HSE + SetSysClockTo144_HSE(); +#elif defined SYSCLK_FREQ_48MHz_HSI + SetSysClockTo48_HSI(); +#elif defined SYSCLK_FREQ_56MHz_HSI + SetSysClockTo56_HSI(); +#elif defined SYSCLK_FREQ_72MHz_HSI + SetSysClockTo72_HSI(); +#elif defined SYSCLK_FREQ_96MHz_HSI + SetSysClockTo96_HSI(); +#elif defined SYSCLK_FREQ_120MHz_HSI + SetSysClockTo120_HSI(); +#elif defined SYSCLK_FREQ_144MHz_HSI + SetSysClockTo144_HSI(); + +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + * source (default after reset) + */ +} + +#ifdef SYSCLK_FREQ_HSE + +/********************************************************************* + * @fn SetSysClockToHSE + * + * @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; + + /* Select HSE as system clock source + * CH32V20x_D6 (HSE=8MHZ) + * CH32V20x_D8 (HSE=32MHZ) + * CH32V20x_D8W (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) + { + } + } + else + { + /* If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo48_HSE + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 6 = 48 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 6 = 48 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo56_HSE + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 7 = 56 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 7 = 56 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo72_HSE + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 9 = 72 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 9 = 72 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_96MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo96_HSE + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 12 = 96 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 12 = 96 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL12); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_120MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo120_HSE + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { +#if defined (CH32V20x_D8W) + RCC->CFGR0 |= (uint32_t)(3<<22); + /* HCLK = SYSCLK/2 */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV2; +#else + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; +#endif + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 15 = 120 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 15 = 120 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/2 * 15 = 240 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL15); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} +#elif defined SYSCLK_FREQ_144MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo144_HSE + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* CH32V20x_D6-PLL configuration: PLLCLK = HSE * 18 = 144 MHz (HSE=8MHZ) + * CH32V20x_D8-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ) + * CH32V20x_D8W-PLL configuration: PLLCLK = HSE/4 * 18 = 144 MHz (HSE=32MHZ) + */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLXTPRE_HSE | RCC_PLLMULL18); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo48_HSI + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo56_HSI + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 7 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo72_HSI + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_96MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo96_HSI + * + * @brief Sets System clock frequency to 96MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo96_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 12 = 96 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL12); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_120MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo120_HSI + * + * @brief Sets System clock frequency to 120MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo120_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 15 = 120 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL15); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} +#elif defined SYSCLK_FREQ_144MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo144_HSI + * + * @brief Sets System clock frequency to 144MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo144_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 18 = 144 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL18); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#endif diff --git a/hw/bsp/ch32v20x/system_ch32v20x.h b/hw/bsp/ch32v20x/system_ch32v20x.h new file mode 100644 index 000000000..eec7ccb15 --- /dev/null +++ b/hw/bsp/ch32v20x/system_ch32v20x.h @@ -0,0 +1,29 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v20x.h + * Author : WCH + * Version : V1.0.0 + * Date : 2021/06/06 + * Description : CH32V20x Device Peripheral Access Layer System Header File. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __SYSTEM_ch32v20x_H +#define __SYSTEM_ch32v20x_H + +#ifdef __cplusplus + extern "C" { +#endif + +extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ + +/* System_Exported_Functions */ +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /*__CH32V20x_SYSTEM_H */ diff --git a/hw/bsp/ch32v20x/wch-riscv.cfg b/hw/bsp/ch32v20x/wch-riscv.cfg new file mode 100644 index 000000000..56a18d77e --- /dev/null +++ b/hw/bsp/ch32v20x/wch-riscv.cfg @@ -0,0 +1,18 @@ +#interface wlink +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 003b90539..7232bfa08 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -4,6 +4,9 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE ?= riscv-none-embed- +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +#CROSS_COMPILE ?= riscv-none-elf- + # Submodules CH32V307_SDK = hw/mcu/wch/ch32v307 @@ -13,6 +16,8 @@ CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# -march=rv32imac_zicsr + CFLAGS += \ -flto \ -msmall-data-limit=8 \ diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index d4b6eaea6..78f20d7db 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,6 +1,10 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE = riscv-none-embed- +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +# CROSS_COMPILE = riscv-none-elf- +# -march=rv32i_zicsr + CPU_CORE ?= rv32i-ilp32 CFLAGS += \ diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 28e48a6b5..646564eae 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -7,6 +7,9 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE ?= riscv-none-embed- +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +# CROSS_COMPILE ?= riscv-none-elf- + # Submodules NUCLEI_SDK = hw/mcu/gd/nuclei-sdk @@ -19,6 +22,8 @@ STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# -march=rv32imac_zicsr + CFLAGS += \ -mcmodel=medlow \ -mstrict-align \ diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 4218835aa..974289b69 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -609,7 +609,7 @@ static bool _negotiate_streaming_parameters(videod_streaming_interface_t const * tusb_desc_cs_video_fmt_t const *fmt = _find_desc_format(tu_desc_next(vs), end, fmtnum); tusb_desc_cs_video_frm_t const *frm = _find_desc_frame(tu_desc_next(fmt), end, frmnum); - uint_fast32_t interval, interval_ms; + uint_fast32_t interval, interval_ms = 0; switch (request) { case VIDEO_REQUEST_GET_MAX: { uint_fast32_t min_interval, max_interval; diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 3a7d6ad33..eab112015 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -410,6 +410,10 @@ #elif TU_CHECK_MCU(OPT_MCU_CH32F20X) #define TUP_DCD_ENDPOINT_MAX 16 #define TUP_RHPORT_HIGHSPEED 1 + +#elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + #define TUP_DCD_ENDPOINT_MAX 8 + #endif diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h new file mode 100644 index 000000000..3b8e49ae2 --- /dev/null +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -0,0 +1,77 @@ +#ifndef USB_CH32_USBFS_REG_H +#define USB_CH32_USBFS_REG_H + +#if (CFG_TUSB_MCU == OPT_MCU_CH32V20X) +#include +#endif + +// CTRL +#define USBFS_CTRL_DMA_EN (1 << 0) +#define USBFS_CTRL_CLR_ALL (1 << 1) +#define USBFS_CTRL_RESET_SIE (1 << 2) +#define USBFS_CTRL_INT_BUSY (1 << 3) +#define USBFS_CTRL_SYS_CTRL (1 << 4) +#define USBFS_CTRL_DEV_PUEN (1 << 5) +#define USBFS_CTRL_LOW_SPEED (1 << 6) +#define USBFS_CTRL_HOST_MODE (1 << 7) + +// INT_EN +#define USBFS_INT_EN_BUS_RST (1 << 0) +#define USBFS_INT_EN_DETECT (1 << 0) +#define USBFS_INT_EN_TRANSFER (1 << 1) +#define USBFS_INT_EN_SUSPEND (1 << 2) +#define USBFS_INT_EN_HST_SOF (1 << 3) +#define USBFS_INT_EN_FIFO_OV (1 << 4) +#define USBFS_INT_EN_DEV_NAK (1 << 6) +#define USBFS_INT_EN_DEV_SOF (1 << 7) + +// INT_FG +#define USBFS_INT_FG_BUS_RST (1 << 0) +#define USBFS_INT_FG_DETECT (1 << 0) +#define USBFS_INT_FG_TRANSFER (1 << 1) +#define USBFS_INT_FG_SUSPEND (1 << 2) +#define USBFS_INT_FG_HST_SOF (1 << 3) +#define USBFS_INT_FG_FIFO_OV (1 << 4) +#define USBFS_INT_FG_SIE_FREE (1 << 5) +#define USBFS_INT_FG_TOG_OK (1 << 6) +#define USBFS_INT_FG_IS_NAK (1 << 7) + +// INT_ST +#define USBFS_INT_ST_MASK_UIS_ENDP(x) (((x) >> 0) & 0x0F) +#define USBFS_INT_ST_MASK_UIS_TOKEN(x) (((x) >> 4) & 0x03) + +// UDEV_CTRL +#define USBFS_UDEV_CTRL_PORT_EN (1 << 0) +#define USBFS_UDEV_CTRL_GP_BIT (1 << 1) +#define USBFS_UDEV_CTRL_LOW_SPEED (1 << 2) +#define USBFS_UDEV_CTRL_DM_PIN (1 << 4) +#define USBFS_UDEV_CTRL_DP_PIN (1 << 5) +#define USBFS_UDEV_CTRL_PD_DIS (1 << 7) + +// TX_CTRL +#define USBFS_EP_T_RES_MASK (3 << 0) +#define USBFS_EP_T_TOG (1 << 2) +#define USBFS_EP_T_AUTO_TOG (1 << 3) + +#define USBFS_EP_T_RES_ACK (0 << 0) +#define USBFS_EP_T_RES_NYET (1 << 0) +#define USBFS_EP_T_RES_NAK (2 << 0) +#define USBFS_EP_T_RES_STALL (3 << 0) + +// RX_CTRL +#define USBFS_EP_R_RES_MASK (3 << 0) +#define USBFS_EP_R_TOG (1 << 2) +#define USBFS_EP_R_AUTO_TOG (1 << 3) + +#define USBFS_EP_R_RES_ACK (0 << 0) +#define USBFS_EP_R_RES_NYET (1 << 0) +#define USBFS_EP_R_RES_NAK (2 << 0) +#define USBFS_EP_R_RES_STALL (3 << 0) + +// token PID +#define PID_OUT 0 +#define PID_SOF 1 +#define PID_IN 2 +#define PID_SETUP 3 + +#endif // USB_CH32_USBFS_REG_H diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c new file mode 100644 index 000000000..256c46696 --- /dev/null +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -0,0 +1,304 @@ +#include "tusb_option.h" + +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X) + +#include +#include "device/dcd.h" +#include "ch32_usbfs_reg.h" + +/* private defines */ +#define EP_MAX (8) + +#define EP_DMA(ep) ((&USBOTG_FS->UEP0_DMA)[ep]) +#define EP_TX_LEN(ep) ((&USBOTG_FS->UEP0_TX_LEN)[2 * ep]) +#define EP_TX_CTRL(ep) ((&USBOTG_FS->UEP0_TX_CTRL)[4 * ep]) +#define EP_RX_CTRL(ep) ((&USBOTG_FS->UEP0_RX_CTRL)[4 * ep]) + +/* private data */ +struct usb_xfer { + bool valid; + uint8_t *buffer; + size_t len; + size_t processed_len; + size_t max_size; +}; + +static struct { + bool ep0_tog; + bool isochronous[EP_MAX]; + struct usb_xfer xfer[EP_MAX][2]; + TU_ATTR_ALIGNED(4) uint8_t buffer[EP_MAX][2][64]; + TU_ATTR_ALIGNED(4) struct { + // OUT transfers >64 bytes will overwrite queued IN data! + uint8_t out[64]; + uint8_t in[1023]; + uint8_t pad; + } ep3_buffer; +} data; + +/* private helpers */ +static void update_in(uint8_t rhport, uint8_t ep, bool force) { + struct usb_xfer *xfer = &data.xfer[ep][TUSB_DIR_IN]; + if (xfer->valid) { + if (force || xfer->len) { + size_t len = TU_MIN(xfer->max_size, xfer->len); + if (ep == 0) { + memcpy(data.buffer[ep][TUSB_DIR_OUT], xfer->buffer, len); // ep0 uses same chunk + } else if (ep == 3) { + memcpy(data.ep3_buffer.in, xfer->buffer, len); + } else { + memcpy(data.buffer[ep][TUSB_DIR_IN], xfer->buffer, len); + } + xfer->buffer += len; + xfer->len -= len; + xfer->processed_len += len; + + EP_TX_LEN(ep) = len; + if (ep == 0) { + EP_TX_CTRL(0) = USBFS_EP_T_RES_ACK | (data.ep0_tog ? USBFS_EP_T_TOG : 0); + data.ep0_tog = !data.ep0_tog; + } else if (data.isochronous[ep]) { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NYET; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_ACK; + } + } else { + xfer->valid = false; + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NAK; + dcd_event_xfer_complete(rhport, ep | TUSB_DIR_IN_MASK, xfer->processed_len, + XFER_RESULT_SUCCESS, true); + } + } +} + +static void update_out(uint8_t rhport, uint8_t ep, size_t rx_len) { + struct usb_xfer *xfer = &data.xfer[ep][TUSB_DIR_OUT]; + if (xfer->valid) { + size_t len = TU_MIN(xfer->max_size, TU_MIN(xfer->len, rx_len)); + if (ep == 3) { + memcpy(xfer->buffer, data.ep3_buffer.out, len); + } else { + memcpy(xfer->buffer, data.buffer[ep][TUSB_DIR_OUT], len); + } + xfer->buffer += len; + xfer->len -= len; + xfer->processed_len += len; + + if (xfer->len == 0 || len < xfer->max_size) { + xfer->valid = false; + dcd_event_xfer_complete(rhport, ep, xfer->processed_len, XFER_RESULT_SUCCESS, true); + } + + if (ep == 0) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + } + } +} + +/* public functions */ +void dcd_init(uint8_t rhport) { + // init registers + USBOTG_FS->BASE_CTRL = USBFS_CTRL_SYS_CTRL | USBFS_CTRL_INT_BUSY | USBFS_CTRL_DMA_EN; + USBOTG_FS->UDEV_CTRL = USBFS_UDEV_CTRL_PD_DIS | USBFS_UDEV_CTRL_PORT_EN; + USBOTG_FS->DEV_ADDR = 0x00; + + USBOTG_FS->INT_FG = 0xFF; + USBOTG_FS->INT_EN = USBFS_INT_EN_BUS_RST | USBFS_INT_EN_TRANSFER | USBFS_INT_EN_SUSPEND; + + // setup endpoint 0 + EP_DMA(0) = (uint32_t) &data.buffer[0][0]; + EP_TX_LEN(0) = 0; + EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + + // enable other endpoints but NAK everything + USBOTG_FS->UEP4_1_MOD = 0xCC; + USBOTG_FS->UEP2_3_MOD = 0xCC; + USBOTG_FS->UEP5_6_MOD = 0xCC; + USBOTG_FS->UEP7_MOD = 0x0C; + + for (uint8_t ep = 1; ep < EP_MAX; ep++) { + EP_DMA(ep) = (uint32_t) &data.buffer[ep][0]; + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NAK; + } + EP_DMA(3) = (uint32_t) &data.ep3_buffer.out[0]; + + dcd_connect(rhport); +} + +void dcd_int_handler(uint8_t rhport) { + (void) rhport; + uint8_t status = USBOTG_FS->INT_FG; + if (status & USBFS_INT_FG_TRANSFER) { + uint8_t ep = USBFS_INT_ST_MASK_UIS_ENDP(USBOTG_FS->INT_ST); + uint8_t token = USBFS_INT_ST_MASK_UIS_TOKEN(USBOTG_FS->INT_ST); + + switch (token) { + case PID_OUT: { + uint16_t rx_len = USBOTG_FS->RX_LEN; + update_out(rhport, ep, rx_len); + break; + } + + case PID_IN: + update_in(rhport, ep, false); + break; + + case PID_SETUP: + data.ep0_tog = true; + dcd_event_setup_received(rhport, &data.buffer[0][TUSB_DIR_OUT][0], true); + break; + } + + USBOTG_FS->INT_FG = USBFS_INT_FG_TRANSFER; + } else if (status & USBFS_INT_FG_BUS_RST) { + data.ep0_tog = true; + data.xfer[0][TUSB_DIR_OUT].max_size = 64; + data.xfer[0][TUSB_DIR_IN].max_size = 64; + + dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true); + + USBOTG_FS->DEV_ADDR = 0x00; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + + USBOTG_FS->INT_FG = USBFS_INT_FG_BUS_RST; + } else if (status & USBFS_INT_FG_SUSPEND) { + dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SUSPEND }; + dcd_event_handler(&event, true); + USBOTG_FS->INT_FG = USBFS_INT_FG_SUSPEND; + } +} + +void dcd_int_enable(uint8_t rhport) { + (void) rhport; + NVIC_EnableIRQ(USBHD_IRQn); +} + +void dcd_int_disable(uint8_t rhport) { + (void) rhport; + NVIC_DisableIRQ(USBHD_IRQn); +} + +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + (void) dev_addr; + dcd_edpt_xfer(rhport, 0x80, NULL, 0); // zlp status response +} + +void dcd_remote_wakeup(uint8_t rhport) { + (void) rhport; + // TODO optional +} + +void dcd_connect(uint8_t rhport) { + (void) rhport; + USBOTG_FS->BASE_CTRL |= USBFS_CTRL_DEV_PUEN; +} + +void dcd_disconnect(uint8_t rhport) { + (void) rhport; + USBOTG_FS->BASE_CTRL &= ~USBFS_CTRL_DEV_PUEN; +} + +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { + (void) rhport; + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && + request->bRequest == TUSB_REQ_SET_ADDRESS) { + USBOTG_FS->DEV_ADDR = (uint8_t) request->wValue; + } + EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; +} + +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { + (void) rhport; + uint8_t ep = tu_edpt_number(desc_ep->bEndpointAddress); + uint8_t dir = tu_edpt_dir(desc_ep->bEndpointAddress); + TU_ASSERT(ep < EP_MAX); + + data.isochronous[ep] = desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS; + data.xfer[ep][dir].max_size = tu_edpt_packet_size(desc_ep); + + if (ep != 0) { + if (dir == TUSB_DIR_OUT) { + if (data.isochronous[ep]) { + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NYET; + } else { + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_ACK; + } + } else { + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; + } + } + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) { + (void) rhport; + // TODO optional +} + +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { + (void) rhport; + (void) ep_addr; + // TODO optional +} + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + + struct usb_xfer *xfer = &data.xfer[ep][dir]; + xfer->valid = true; + xfer->buffer = buffer; + xfer->len = total_bytes; + xfer->processed_len = 0; + + if (dir == TUSB_DIR_IN) { + update_in(rhport, ep, true); + } + return true; +} + +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + if (ep == 0) { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_STALL; + } else { + EP_TX_LEN(0) = 0; + EP_TX_CTRL(0) = USBFS_EP_T_RES_STALL; + } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~USBFS_EP_R_RES_MASK) | USBFS_EP_R_RES_STALL; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~USBFS_EP_T_RES_MASK) | USBFS_EP_T_RES_STALL; + } + } +} + +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + if (ep == 0) { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~(USBFS_EP_R_RES_MASK | USBFS_EP_R_TOG)) | USBFS_EP_R_RES_ACK; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK | USBFS_EP_T_TOG)) | USBFS_EP_T_RES_NAK; + } + } +} + +#endif // CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X) diff --git a/src/tusb_option.h b/src/tusb_option.h index 058427e0e..3d04825a4 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -181,6 +181,7 @@ // WCH #define OPT_MCU_CH32V307 2200 ///< WCH CH32V307 #define OPT_MCU_CH32F20X 2210 ///< WCH CH32F20x +#define OPT_MCU_CH32V20X 2220 ///< WCH CH32V20X // NXP LPC MCX diff --git a/tools/get_deps.py b/tools/get_deps.py index 87c1c5ccd..cf15126b3 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -168,6 +168,9 @@ deps_optional = { 'hw/mcu/ti': ['https://github.com/hathach/ti_driver.git', '143ed6cc20a7615d042b03b21e070197d473e6e5', 'msp430 msp432e4 tm4c'], + 'hw/mcu/wch/ch32v20x': ['https://github.com/openwch/ch32v20x.git', + 'de6d68c654340d7f27b00cebbfc9aa2740a1abc2', + 'ch32v20x'], 'hw/mcu/wch/ch32v307': ['https://github.com/openwch/ch32v307.git', '17761f5cf9dbbf2dcf665b7c04934188add20082', 'ch32v307'], diff --git a/tools/iar_template.ipcf b/tools/iar_template.ipcf index e72ec0ce2..33a6ef045 100644 --- a/tools/iar_template.ipcf +++ b/tools/iar_template.ipcf @@ -239,6 +239,7 @@ $TUSB_DIR$/src/portable/valentyusb/eptri/dcd_eptri.h + $TUSB_DIR$/src/portable/wch/dcd_ch32_usbfs.c $TUSB_DIR$/src/portable/wch/dcd_ch32_usbhs.c $TUSB_DIR$/src/portable/wch/ch32_usbhs_reg.h -- cgit v1.3.1 From 2a67ce773dcd68f7f8c4c07fce2e6e4f7947e03d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 15 May 2024 20:13:00 +0700 Subject: change default risv-gcc to riscv-none-elf- and add _zicsr extension add cmake for ch32v20x, skip freertos examples for CH32V20X, also skip net webserver due to lack of RAM update to use openocd with wlinke adapter --- .github/workflows/ci_set_matrix.py | 4 +- .idea/cmake.xml | 4 +- examples/build_system/cmake/cpu/rv32i-ilp32.cmake | 4 +- .../build_system/cmake/cpu/rv32imac-ilp32.cmake | 4 +- .../build_system/cmake/toolchain/riscv_gcc.cmake | 19 +++- examples/build_system/make/cpu/rv32i-ilp32.mk | 11 ++- examples/build_system/make/cpu/rv32imac-ilp32.mk | 10 +- .../device/audio_4_channel_mic_freertos/skip.txt | 1 + examples/device/audio_test_freertos/skip.txt | 1 + examples/device/net_lwip_webserver/skip.txt | 1 + examples/device/video_capture_2ch/skip.txt | 1 + hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake | 7 ++ hw/bsp/ch32v20x/family.cmake | 109 +++++++++++++++++++++ hw/bsp/ch32v20x/family.mk | 17 ++-- hw/bsp/ch32v20x/wch-riscv.cfg | 1 - hw/bsp/ch32v307/family.cmake | 1 - hw/bsp/ch32v307/family.mk | 8 +- hw/bsp/ch32v307/wch-riscv.cfg | 16 +-- hw/bsp/family_support.cmake | 1 + hw/bsp/fomu/family.mk | 6 +- hw/bsp/gd32vf103/family.mk | 7 +- src/portable/wch/dcd_ch32_usbfs.c | 8 ++ 22 files changed, 191 insertions(+), 50 deletions(-) create mode 100644 hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake create mode 100644 hw/bsp/ch32v20x/family.cmake (limited to 'src/portable') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 62239c9ad..c6f4e8fe2 100644 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -7,14 +7,14 @@ toolchain_list = { "arm-iar": "", "arm-gcc": "", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", - "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz", + "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz" } # family: [supported toolchain] family_list = { "broadcom_32bit": ["arm-gcc"], "broadcom_64bit": ["aarch64-gcc"], - "ch32v307 fomu gd32vf103": ["riscv-gcc"], + "ch32v20x ch32v307 fomu gd32vf103": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], "lpc11 lpc13 lpc15": ["arm-gcc", "arm-clang"], diff --git a/.idea/cmake.xml b/.idea/cmake.xml index bb13a0466..a34f19e1f 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -66,6 +66,7 @@ + @@ -103,6 +104,7 @@ + @@ -120,7 +122,6 @@ - @@ -130,6 +131,7 @@ + \ No newline at end of file diff --git a/examples/build_system/cmake/cpu/rv32i-ilp32.cmake b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake index b4889e6ff..605c40ba1 100644 --- a/examples/build_system/cmake/cpu/rv32i-ilp32.cmake +++ b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake @@ -1,13 +1,13 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32i + -march=rv32i_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32i + -march=rv32i_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") diff --git a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake index dd1bc0af7..584d90519 100644 --- a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake +++ b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake @@ -1,13 +1,13 @@ if (TOOLCHAIN STREQUAL "gcc") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac + -march=rv32imac_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") elseif (TOOLCHAIN STREQUAL "clang") set(TOOLCHAIN_COMMON_FLAGS - -march=rv32imac + -march=rv32imac_zicsr -mabi=ilp32 ) set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") diff --git a/examples/build_system/cmake/toolchain/riscv_gcc.cmake b/examples/build_system/cmake/toolchain/riscv_gcc.cmake index 904b27294..d788df023 100644 --- a/examples/build_system/cmake/toolchain/riscv_gcc.cmake +++ b/examples/build_system/cmake/toolchain/riscv_gcc.cmake @@ -1,15 +1,24 @@ +# default Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +if (NOT DEFINED CROSS_COMPILE) + set(CROSS_COMPILE "riscv-none-elf-") +endif () + +if (NOT DEFINED CMAKE_C_COMPILER) + set(CMAKE_C_COMPILER ${CROSS_COMPILE}gcc) +endif () + if (NOT DEFINED CMAKE_C_COMPILER) - set(CMAKE_C_COMPILER "riscv-none-embed-gcc") + set(CMAKE_C_COMPILER ${CROSS_COMPILE}gcc) endif () if (NOT DEFINED CMAKE_CXX_COMPILER) - set(CMAKE_CXX_COMPILER "riscv-none-embed-g++") + set(CMAKE_CXX_COMPILER ${CROSS_COMPILE}g++) endif () set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) -set(CMAKE_SIZE "riscv-none-embed-size" CACHE FILEPATH "") -set(CMAKE_OBJCOPY "riscv-none-embed-objcopy" CACHE FILEPATH "") -set(CMAKE_OBJDUMP "riscv-none-embed-objdump" CACHE FILEPATH "") +set(CMAKE_SIZE ${CROSS_COMPILE}size CACHE FILEPATH "") +set(CMAKE_OBJCOPY ${CROSS_COMPILE}objcopy CACHE FILEPATH "") +set(CMAKE_OBJDUMP ${CROSS_COMPILE}objdump CACHE FILEPATH "") include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) diff --git a/examples/build_system/make/cpu/rv32i-ilp32.mk b/examples/build_system/make/cpu/rv32i-ilp32.mk index a465baf4c..af764afc5 100644 --- a/examples/build_system/make/cpu/rv32i-ilp32.mk +++ b/examples/build_system/make/cpu/rv32i-ilp32.mk @@ -1,12 +1,15 @@ ifeq ($(TOOLCHAIN),gcc) CFLAGS += \ - -march=rv32i \ + -march=rv32i_zicsr \ -mabi=ilp32 \ -else ifeq ($(TOOLCHAIN),iar) - #CFLAGS += --cpu cortex-a53 - #ASFLAGS += --cpu cortex-a53 +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + -march=rv32i_zicsr \ + -mabi=ilp32 \ +else ifeq ($(TOOLCHAIN),iar) + $(error not support) endif # For freeRTOS port source diff --git a/examples/build_system/make/cpu/rv32imac-ilp32.mk b/examples/build_system/make/cpu/rv32imac-ilp32.mk index 2b6493e48..19c322ebc 100644 --- a/examples/build_system/make/cpu/rv32imac-ilp32.mk +++ b/examples/build_system/make/cpu/rv32imac-ilp32.mk @@ -1,11 +1,15 @@ ifeq ($(TOOLCHAIN),gcc) CFLAGS += \ - -march=rv32imac \ + -march=rv32imac_zicsr \ + -mabi=ilp32 \ + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + -march=rv32imac_zicsr \ -mabi=ilp32 \ else ifeq ($(TOOLCHAIN),iar) - #CFLAGS += --cpu cortex-a53 - #ASFLAGS += --cpu cortex-a53 + $(error not support) endif diff --git a/examples/device/audio_4_channel_mic_freertos/skip.txt b/examples/device/audio_4_channel_mic_freertos/skip.txt index 0b689192d..4769af009 100644 --- a/examples/device/audio_4_channel_mic_freertos/skip.txt +++ b/examples/device/audio_4_channel_mic_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/audio_test_freertos/skip.txt b/examples/device/audio_test_freertos/skip.txt index a6f96b288..6aaa27661 100644 --- a/examples/device/audio_test_freertos/skip.txt +++ b/examples/device/audio_test_freertos/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:CH32V307 mcu:CXD56 mcu:F1C100S diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 43cdab71a..51af58667 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -1,3 +1,4 @@ +mcu:CH32V20X mcu:LPC11UXX mcu:LPC13XX mcu:LPC15XX diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index 86697899b..1786297f9 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -2,6 +2,7 @@ mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 mcu:GD32VF103 +mcu:CH32V20X mcu:CH32V307 mcu:STM32L0 family:espressif diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake b/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake new file mode 100644 index 000000000..2699f3e15 --- /dev/null +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake @@ -0,0 +1,7 @@ +set(MCU_VARIANT D6) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CH32V20x_D6 + ) +endfunction() diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake new file mode 100644 index 000000000..fb39e3630 --- /dev/null +++ b/hw/bsp/ch32v20x/family.cmake @@ -0,0 +1,109 @@ +include_guard() + +set(CH32_FAMILY ch32v20x) +set(SDK_DIR ${TOP}/hw/mcu/wch/${CH32_FAMILY}/EVT/EXAM/SRC) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CH32V20X CACHE INTERNAL "") +set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${SDK_DIR}/Ld/Link.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_${CH32_FAMILY}_${MCU_VARIANT}.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Core/core_riscv.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Peripheral/inc + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -mcmodel=medany + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd_wch(${TARGET}) +endfunction() diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 2d94f19fb..7e290bb18 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -1,3 +1,9 @@ +# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable +#CROSS_COMPILE ?= riscv32-unknown-elf- + +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- + # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack CROSS_COMPILE ?= riscv-none-elf- @@ -9,23 +15,21 @@ DEPS_SUBMODULES += $(CH32V20X_SDK) CH32V20X_SDK_SRC = $(CH32V20X_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ - -march=rv32imac_zicsr \ - -mabi=ilp32 \ -mcmodel=medany \ -ffunction-sections \ -fdata-sections \ -ffat-lto-objects \ -flto \ - -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_CH32V20X \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED \ LDFLAGS_GCC += \ -Wl,--gc-sections \ - -specs=nosys.specs \ - -specs=nano.specs \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs \ LD_FILE = $(CH32V20X_SDK_SRC)/Ld/Link.ld @@ -46,5 +50,6 @@ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # wch-link is not supported yet in official openOCD yet. We need to either use # 1. download openocd as part of mounriver studio http://www.mounriver.com/download or # 2. compiled from modified source https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +OPENOCD ?= $(HOME)/app/riscv-openocd-wch/src/openocd flash: $(BUILD)/$(PROJECT).elf - openocd -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit + $(OPENOCD) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit diff --git a/hw/bsp/ch32v20x/wch-riscv.cfg b/hw/bsp/ch32v20x/wch-riscv.cfg index 56a18d77e..aa35aa9c5 100644 --- a/hw/bsp/ch32v20x/wch-riscv.cfg +++ b/hw/bsp/ch32v20x/wch-riscv.cfg @@ -1,4 +1,3 @@ -#interface wlink adapter driver wlinke adapter speed 6000 transport select sdi diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index 87a0f2eba..fb478d387 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -11,7 +11,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") -set(OPENOCD_OPTION2 "-c wlink_reset_resume") #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 7232bfa08..df9ded4a0 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -1,11 +1,11 @@ # https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable #CROSS_COMPILE ?= riscv32-unknown-elf- -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE ?= riscv-none-embed- +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack -#CROSS_COMPILE ?= riscv-none-elf- +CROSS_COMPILE ?= riscv-none-elf- # Submodules CH32V307_SDK = hw/mcu/wch/ch32v307 @@ -16,8 +16,6 @@ CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 -# -march=rv32imac_zicsr - CFLAGS += \ -flto \ -msmall-data-limit=8 \ diff --git a/hw/bsp/ch32v307/wch-riscv.cfg b/hw/bsp/ch32v307/wch-riscv.cfg index 0d24d16ca..aa35aa9c5 100644 --- a/hw/bsp/ch32v307/wch-riscv.cfg +++ b/hw/bsp/ch32v307/wch-riscv.cfg @@ -1,13 +1,15 @@ -#interface wlink -adapter driver wlink -wlink_set -set _CHIPNAME riscv -jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME -$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1 +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index df4f616ef..6eef5b88b 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -440,6 +440,7 @@ function(family_flash_openocd TARGET) endfunction() # Add flash openocd-wch target +# compiled from https://github.com/hathach/riscv-openocd-wch or https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz function(family_flash_openocd_wch TARGET) if (NOT DEFINED OPENOCD) set(OPENOCD $ENV{HOME}/app/riscv-openocd-wch/src/openocd) diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index 78f20d7db..69a546964 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,9 +1,5 @@ -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE = riscv-none-embed- - # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack -# CROSS_COMPILE = riscv-none-elf- -# -march=rv32i_zicsr +CROSS_COMPILE = riscv-none-elf- CPU_CORE ?= rv32i-ilp32 diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 646564eae..48588886c 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -4,11 +4,8 @@ # Toolchain from https://nucleisys.com/download.php #CROSS_COMPILE ?= riscv-nuclei-elf- -# Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack -CROSS_COMPILE ?= riscv-none-embed- - # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack -# CROSS_COMPILE ?= riscv-none-elf- +CROSS_COMPILE ?= riscv-none-elf- # Submodules NUCLEI_SDK = hw/mcu/gd/nuclei-sdk @@ -22,8 +19,6 @@ STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 -# -march=rv32imac_zicsr - CFLAGS += \ -mcmodel=medlow \ -mstrict-align \ diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 256c46696..83f625e21 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -201,6 +201,14 @@ void dcd_disconnect(uint8_t rhport) { USBOTG_FS->BASE_CTRL &= ~USBFS_CTRL_DEV_PUEN; } +void dcd_sof_enable(uint8_t rhport, bool en) +{ + (void) rhport; + (void) en; + + // TODO implement later +} + void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { (void) rhport; if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && -- cgit v1.3.1 From ab5f2768773634efe8c79add7e009e2e2ca63279 Mon Sep 17 00:00:00 2001 From: Matthew Tran Date: Fri, 17 May 2024 09:52:06 -0700 Subject: fix ep0 stall not clearing --- src/portable/wch/dcd_ch32_usbfs.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'src/portable') diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 83f625e21..3af3ff6d7 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -148,6 +148,8 @@ void dcd_int_handler(uint8_t rhport) { case PID_SETUP: data.ep0_tog = true; + dcd_edpt_clear_stall(rhport, tu_edpt_addr(0, TUSB_DIR_IN)); // setup clears stall + dcd_edpt_clear_stall(rhport, tu_edpt_addr(0, TUSB_DIR_OUT)); dcd_event_setup_received(rhport, &data.buffer[0][TUSB_DIR_OUT][0], true); break; } @@ -261,10 +263,12 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to uint8_t dir = tu_edpt_dir(ep_addr); struct usb_xfer *xfer = &data.xfer[ep][dir]; + dcd_int_disable(rhport); xfer->valid = true; xfer->buffer = buffer; xfer->len = total_bytes; xfer->processed_len = 0; + dcd_int_enable(rhport); if (dir == TUSB_DIR_IN) { update_in(rhport, ep, true); -- cgit v1.3.1 From 5fee292606e4c5502b2172328c02d5df24eb0c7c Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 17 May 2024 16:13:59 +0700 Subject: temp code --- hw/bsp/ch32v307/family.c | 25 +++++++++++++++++++++++++ hw/bsp/ch32v307/family.cmake | 23 ++++++++++++++--------- src/common/tusb_mcu.h | 4 ++-- src/portable/wch/ch32_usbfs_reg.h | 9 ++++++++- src/portable/wch/dcd_ch32_usbfs.c | 2 +- 5 files changed, 50 insertions(+), 13 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 245fa5674..50e48e7df 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -46,6 +46,18 @@ __attribute__ ((used)) void USBHS_IRQHandler_impl (void) tud_int_handler(0); } + +void OTG_FS_IRQHandler (void) __attribute__((naked)); +void OTG_FS_IRQHandler (void) +{ + __asm volatile ("call OTG_FS_IRQHandler_impl; mret"); +} + +__attribute__ ((used)) void OTG_FS_IRQHandler_impl (void) +{ + tud_int_handler(0); +} + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ @@ -72,6 +84,7 @@ void board_init(void) { usart_printf_init(115200); + #if 0 RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); RCC_USBHSConfig(RCC_USBPLL_Div2); @@ -79,6 +92,18 @@ void board_init(void) { RCC_USBHSPHYPLLALIVEcmd(ENABLE); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); + #else + uint8_t otg_div; + switch (SystemCoreClock) { + case 48000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div1; break; + case 96000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div2; break; + case 144000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div3; break; + default: TU_ASSERT(0,); break; + } + RCC_OTGFSCLKConfig(otg_div); + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); + #endif + GPIO_InitTypeDef GPIO_InitStructure = {0}; // LED diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index fb478d387..8a4bd7730 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -1,5 +1,6 @@ include_guard() +set(CH32_FAMILY ch32v30x) set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307/EVT/EXAM/SRC) # include board specific @@ -12,6 +13,8 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") +# Port0 Fullspeed, Port1 Highspeed + #------------------------------------ # BOARD_TARGET #------------------------------------ @@ -27,18 +30,18 @@ function(add_board_target BOARD_TARGET) set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_ch32v30x_D8C.S) + set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC ${SDK_DIR}/Core/core_riscv.c - ${SDK_DIR}/Peripheral/src/ch32v30x_gpio.c - ${SDK_DIR}/Peripheral/src/ch32v30x_misc.c - ${SDK_DIR}/Peripheral/src/ch32v30x_rcc.c - ${SDK_DIR}/Peripheral/src/ch32v30x_usart.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch32v30x_it.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_ch32v30x.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${CH32_FAMILY}_it.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC @@ -46,7 +49,8 @@ function(add_board_target BOARD_TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + #BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) update_board(${BOARD_TARGET}) @@ -100,7 +104,8 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/wch/dcd_ch32_usbhs.c + #${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index eab112015..e313fea05 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -404,8 +404,8 @@ //------------- WCH -------------// #elif TU_CHECK_MCU(OPT_MCU_CH32V307) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 +// #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_CH32F20X) #define TUP_DCD_ENDPOINT_MAX 16 diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h index 3b8e49ae2..d5341f3a8 100644 --- a/src/portable/wch/ch32_usbfs_reg.h +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -1,8 +1,15 @@ #ifndef USB_CH32_USBFS_REG_H #define USB_CH32_USBFS_REG_H -#if (CFG_TUSB_MCU == OPT_MCU_CH32V20X) +#if (CFG_TUSB_MCU == OPT_MCU_CH32V307) +#include +#define USBHD_IRQn OTG_FS_IRQn + +#elif (CFG_TUSB_MCU == OPT_MCU_CH32V20X) #include + +#elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) +#include #endif // CTRL diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 3af3ff6d7..3e4b6cae5 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -1,6 +1,6 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X) +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X || CFG_TUSB_MCU == OPT_MCU_CH32V307) #include #include "device/dcd.h" -- cgit v1.3.1 From b19295c1c15de676e7cebd5bd5b6aa53887c6a56 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 May 2024 17:26:04 +0700 Subject: use correct wch usbhs, usbfs for ch32v307 using CFG_TUD_MAX_SPEED --- examples/build_system/make/rules.mk | 11 ++++++ hw/bsp/ch32v20x/family.mk | 10 +---- hw/bsp/ch32v307/family.c | 77 ++++++++++++------------------------- hw/bsp/ch32v307/family.cmake | 27 +++++++------ hw/bsp/ch32v307/family.mk | 61 +++++++++++++---------------- src/common/tusb_mcu.h | 16 ++++++-- src/portable/wch/ch32_usbhs_reg.h | 4 +- src/portable/wch/dcd_ch32_usbfs.c | 3 +- src/portable/wch/dcd_ch32_usbhs.c | 6 +-- 9 files changed, 98 insertions(+), 117 deletions(-) (limited to 'src/portable') diff --git a/examples/build_system/make/rules.mk b/examples/build_system/make/rules.mk index 7b6b339ed..102c6db0c 100644 --- a/examples/build_system/make/rules.mk +++ b/examples/build_system/make/rules.mk @@ -134,6 +134,17 @@ OPENOCD_OPTION ?= flash-openocd: $(BUILD)/$(PROJECT).elf openocd $(OPENOCD_OPTION) -c "program $< verify reset exit" +# --------------- openocd-wch ----------------- +# wch-linke is not supported yet in official openOCD yet. We need to either use +# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or +# 2. compiled from https://github.com/hathach/riscv-openocd-wch or +# https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz +# with ./configure --disable-werror --enable-wlinke --enable-ch347=no +OPENOCD_WCH ?= /home/${USER}/app/riscv-openocd-wch/src/openocd +OPENOCD_WCH_OPTION ?= +flash-openocd-wch: $(BUILD)/$(PROJECT).elf + $(OPENOCD_WCH) $(OPENOCD_WCH_OPTION) -c init -c halt -c "flash write_image $<" -c reset -c exit + # --------------- dfu-util ----------------- DFU_UTIL_OPTION ?= -a 0 flash-dfu-util: $(BUILD)/$(PROJECT).bin diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 6b09fdac7..5c8b31a1c 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -16,8 +16,6 @@ CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ -mcmodel=medany \ - -ffunction-sections \ - -fdata-sections \ -ffat-lto-objects \ -flto \ -DCH32V20x_${MCU_VARIANT} \ @@ -46,9 +44,5 @@ INC += \ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V -# wch-link is not supported yet in official openOCD yet. We need to either use -# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or -# 2. compiled from modified source https://github.com/dragonlock2/miscboards/blob/main/wch/SDK/riscv-openocd.tar.xz -OPENOCD ?= $(HOME)/app/riscv-openocd-wch/src/openocd -flash: $(BUILD)/$(PROJECT).elf - $(OPENOCD) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "flash write_image $<" -c reset -c exit +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 50e48e7df..fe37ea8e3 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -35,41 +35,31 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USBHS_IRQHandler (void) __attribute__((naked)); -void USBHS_IRQHandler (void) -{ - __asm volatile ("call USBHS_IRQHandler_impl; mret"); -} +// TODO maybe having FS as port0, HS as port1 -__attribute__ ((used)) void USBHS_IRQHandler_impl (void) -{ +__attribute__((interrupt)) void USBHS_IRQHandler(void) { + #if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED tud_int_handler(0); + #endif } - -void OTG_FS_IRQHandler (void) __attribute__((naked)); -void OTG_FS_IRQHandler (void) -{ - __asm volatile ("call OTG_FS_IRQHandler_impl; mret"); -} - -__attribute__ ((used)) void OTG_FS_IRQHandler_impl (void) -{ +__attribute__((interrupt)) void OTG_FS_IRQHandler(void) { + #if CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED tud_int_handler(0); + #endif } //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -uint32_t SysTick_Config(uint32_t ticks) -{ +uint32_t SysTick_Config(uint32_t ticks) { NVIC_EnableIRQ(SysTicK_IRQn); - SysTick->CTLR=0; - SysTick->SR=0; - SysTick->CNT=0; - SysTick->CMP=ticks-1; - SysTick->CTLR=0xF; + SysTick->CTLR = 0; + SysTick->SR = 0; + SysTick->CNT = 0; + SysTick->CMP = ticks - 1; + SysTick->CTLR = 0xF; return 0; } @@ -82,17 +72,17 @@ void board_init(void) { SysTick_Config(SystemCoreClock / 1000); #endif - usart_printf_init(115200); + usart_printf_init(115200); - #if 0 +#if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED + // Use Highspeed USB RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); RCC_USBHSConfig(RCC_USBPLL_Div2); RCC_USBHSPLLCKREFCLKConfig(RCC_USBHSPLLCKREFCLK_4M); RCC_USBHSPHYPLLALIVEcmd(ENABLE); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); - - #else +#else uint8_t otg_div; switch (SystemCoreClock) { case 48000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div1; break; @@ -102,7 +92,7 @@ void board_init(void) { } RCC_OTGFSCLKConfig(otg_div); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); - #endif +#endif GPIO_InitTypeDef GPIO_InitStructure = {0}; @@ -127,24 +117,14 @@ void board_init(void) { } #if CFG_TUSB_OS == OPT_OS_NONE - volatile uint32_t system_ticks = 0; -/* Small workaround to support HW stack save/restore */ -void SysTick_Handler (void) __attribute__((naked)); -void SysTick_Handler (void) -{ - __asm volatile ("call SysTick_Handler_impl; mret"); -} - -__attribute__((used)) void SysTick_Handler_impl (void) -{ +__attribute__((interrupt)) void SysTick_Handler(void) { SysTick->SR = 0; system_ticks++; } -uint32_t board_millis (void) -{ +uint32_t board_millis(void) { return system_ticks; } @@ -154,36 +134,29 @@ uint32_t board_millis (void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write (bool state) -{ +void board_led_write(bool state) { GPIO_WriteBit(LED_PORT, LED_PIN, state); } -uint32_t board_button_read (void) -{ +uint32_t board_button_read(void) { return BUTTON_STATE_ACTIVE == GPIO_ReadInputDataBit(BUTTON_PORT, BUTTON_PIN); } -int board_uart_read (uint8_t *buf, int len) -{ +int board_uart_read(uint8_t* buf, int len) { (void) buf; (void) len; return 0; } -int board_uart_write (void const *buf, int len) -{ +int board_uart_write(void const* buf, int len) { int txsize = len; - while ( txsize-- ) - { + while (txsize--) { uart_write(*(uint8_t const*) buf); buf++; } return len; } - - #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index 8a4bd7730..fd475c987 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -1,7 +1,8 @@ include_guard() set(CH32_FAMILY ch32v30x) -set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307/EVT/EXAM/SRC) +set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307) +set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -13,7 +14,10 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") -# Port0 Fullspeed, Port1 Highspeed +# default to highspeed +if (NOT DEFINED SPEED) + set(SPEED high) +endif() #------------------------------------ # BOARD_TARGET @@ -30,27 +34,26 @@ function(add_board_target BOARD_TARGET) set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) + set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}_D8C.S) endif () set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/Core/core_riscv.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c - ${SDK_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${SDK_SRC_DIR}/Core/core_riscv.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${CH32_FAMILY}_it.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/Peripheral/inc + ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) target_compile_definitions(${BOARD_TARGET} PUBLIC - #BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + BOARD_TUD_MAX_SPEED=$,OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> ) update_board(${BOARD_TARGET}) @@ -104,7 +107,7 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC - #${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ${TOP}/src/portable/wch/dcd_ch32_usbhs.c ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index df9ded4a0..2dbe0c46a 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -7,63 +7,54 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack CROSS_COMPILE ?= riscv-none-elf- -# Submodules -CH32V307_SDK = hw/mcu/wch/ch32v307 - -# WCH-SDK paths -CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC +CH32_FAMILY = ch32v30x +SDK_DIR = hw/mcu/wch/ch32v307 +SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# default to use high speed port, unless specified in board.mk or command line +SPEED ?= high + CFLAGS += \ -flto \ -msmall-data-limit=8 \ - -mno-save-restore -Os \ + -mno-save-restore \ -fmessage-length=0 \ -fsigned-char \ - -ffunction-sections \ - -fdata-sections \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ - -Xlinker --gc-sections \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + +ifeq ($(SPEED),high) + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using USBHS driver for HighSpeed mode") +else + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + $(info "Using USBFS driver for FullSpeed mode") +endif LDFLAGS_GCC += \ -nostdlib -nostartfiles \ - --specs=nosys.specs --specs=nano.specs + --specs=nosys.specs --specs=nano.specs \ SRC_C += \ src/portable/wch/dcd_ch32_usbhs.c \ - $(CH32V307_SDK_SRC)/Core/core_riscv.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_gpio.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_misc.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_rcc.c \ - $(CH32V307_SDK_SRC)/Peripheral/src/ch32v30x_usart.c + src/portable/wch/dcd_ch32_usbfs.c \ + $(SDK_SRC_DIR)/Core/core_riscv.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_rcc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_usart.c SRC_S += \ - $(CH32V307_SDK_SRC)/Startup/startup_ch32v30x_D8C.S + $(SDK_SRC_DIR)/Startup/startup_${CH32_FAMILY}_D8C.S INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(CH32V307_SDK_SRC)/Peripheral/inc + $(TOP)/$(SDK_SRC_DIR)/Peripheral/inc # For freeRTOS port source FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V -# wch-link is not supported yet in official openOCD yet. We need to either use -# 1. download openocd as part of mounriver studio http://www.mounriver.com/download or -# 2. compiled from modified source https://github.com/kprasadvnsi/riscv-openocd-wch -# -# Note: For Linux, somehow openocd in mounriver studio does not seem to have wch-link enable, -# therefore we need to compile it from source as follows: -# git clone https://github.com/kprasadvnsi/riscv-openocd-wch -# cd riscv-openocd-wch -# ./bootstrap -# ./configure CFLAGS="-Wno-error" --enable-wlink -# make -# openocd binaries will be generated in riscv-openocd-wch/src - -# flash target ROM bootloader -OPENOCD_WCH = /home/${USER}/app/riscv-openocd-wch/src/openocd -flash: $(BUILD)/$(PROJECT).elf - $(OPENOCD_WCH) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "program $<" -c wlink_reset_resume -c exit +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index e313fea05..d928e44e8 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -404,14 +404,22 @@ //------------- WCH -------------// #elif TU_CHECK_MCU(OPT_MCU_CH32V307) - #define TUP_DCD_ENDPOINT_MAX 8 -// #define TUP_RHPORT_HIGHSPEED 1 + // v307 support both FS and HS + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32F20X) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + #define TUP_USBIP_WCH_USBFS #define TUP_DCD_ENDPOINT_MAX 8 #endif diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index 9b956231f..6ae91ec71 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -2,9 +2,9 @@ #define _USB_CH32_USBHS_REG_H #if (CFG_TUSB_MCU == OPT_MCU_CH32V307) -#include + #include #elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) -#include + #include #endif /******************* GLOBAL ******************/ diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 3e4b6cae5..413fe92c9 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -1,6 +1,7 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X || CFG_TUSB_MCU == OPT_MCU_CH32V307) +// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is full speed +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && (CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED) #include #include "device/dcd.h" diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 68e2179e9..9a12fc97f 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -26,11 +26,11 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && ((CFG_TUSB_MCU == OPT_MCU_CH32V307) || (CFG_TUSB_MCU == OPT_MCU_CH32F20X)) -#include "device/dcd.h" - +// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is high speed +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED) #include "ch32_usbhs_reg.h" +#include "device/dcd.h" // Max number of bi-directional endpoints including EP0 #define EP_MAX 16 -- cgit v1.3.1 From 07d879378f052386699aba1eb41f04d4d32fb865 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 May 2024 17:32:40 +0700 Subject: code format add missing MIT license --- .idea/cmake.xml | 2 + src/portable/wch/ch32_usbfs_reg.h | 41 +++- src/portable/wch/ch32_usbhs_reg.h | 37 ++- src/portable/wch/dcd_ch32_usbfs.c | 482 ++++++++++++++++++++------------------ 4 files changed, 323 insertions(+), 239 deletions(-) (limited to 'src/portable') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index a34f19e1f..d96b46853 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -132,6 +132,8 @@ + + \ No newline at end of file diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h index d5341f3a8..0a50a6169 100644 --- a/src/portable/wch/ch32_usbfs_reg.h +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -1,15 +1,42 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Matthew Tran + * Copyright (c) 2024 hathach + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + #ifndef USB_CH32_USBFS_REG_H #define USB_CH32_USBFS_REG_H -#if (CFG_TUSB_MCU == OPT_MCU_CH32V307) -#include -#define USBHD_IRQn OTG_FS_IRQn +#if CFG_TUSB_MCU == OPT_MCU_CH32V307 + #include + #define USBHD_IRQn OTG_FS_IRQn -#elif (CFG_TUSB_MCU == OPT_MCU_CH32V20X) -#include +#elif CFG_TUSB_MCU == OPT_MCU_CH32V20X + #include -#elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) -#include +#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X + #include #endif // CTRL diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index 6ae91ec71..a3a41bb6a 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -1,9 +1,36 @@ -#ifndef _USB_CH32_USBHS_REG_H -#define _USB_CH32_USBHS_REG_H - -#if (CFG_TUSB_MCU == OPT_MCU_CH32V307) +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Matthew Tran + * Copyright (c) 2024 hathach + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef USB_CH32_USBHS_REG_H +#define USB_CH32_USBHS_REG_H + +#if CFG_TUSB_MCU == OPT_MCU_CH32V307 #include -#elif (CFG_TUSB_MCU == OPT_MCU_CH32F20X) +#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X #include #endif diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 413fe92c9..dafe4414e 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -1,9 +1,35 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Matthew Tran + * Copyright (c) 2024 hathach + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + #include "tusb_option.h" // Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is full speed #if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && (CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED) -#include #include "device/dcd.h" #include "ch32_usbfs_reg.h" @@ -17,301 +43,303 @@ /* private data */ struct usb_xfer { - bool valid; - uint8_t *buffer; - size_t len; - size_t processed_len; - size_t max_size; + bool valid; + uint8_t* buffer; + size_t len; + size_t processed_len; + size_t max_size; }; static struct { - bool ep0_tog; - bool isochronous[EP_MAX]; - struct usb_xfer xfer[EP_MAX][2]; - TU_ATTR_ALIGNED(4) uint8_t buffer[EP_MAX][2][64]; - TU_ATTR_ALIGNED(4) struct { - // OUT transfers >64 bytes will overwrite queued IN data! - uint8_t out[64]; - uint8_t in[1023]; - uint8_t pad; - } ep3_buffer; + bool ep0_tog; + bool isochronous[EP_MAX]; + struct usb_xfer xfer[EP_MAX][2]; + TU_ATTR_ALIGNED(4) uint8_t buffer[EP_MAX][2][64]; + TU_ATTR_ALIGNED(4) struct { + // OUT transfers >64 bytes will overwrite queued IN data! + uint8_t out[64]; + uint8_t in[1023]; + uint8_t pad; + } ep3_buffer; } data; /* private helpers */ static void update_in(uint8_t rhport, uint8_t ep, bool force) { - struct usb_xfer *xfer = &data.xfer[ep][TUSB_DIR_IN]; - if (xfer->valid) { - if (force || xfer->len) { - size_t len = TU_MIN(xfer->max_size, xfer->len); - if (ep == 0) { - memcpy(data.buffer[ep][TUSB_DIR_OUT], xfer->buffer, len); // ep0 uses same chunk - } else if (ep == 3) { - memcpy(data.ep3_buffer.in, xfer->buffer, len); - } else { - memcpy(data.buffer[ep][TUSB_DIR_IN], xfer->buffer, len); - } - xfer->buffer += len; - xfer->len -= len; - xfer->processed_len += len; - - EP_TX_LEN(ep) = len; - if (ep == 0) { - EP_TX_CTRL(0) = USBFS_EP_T_RES_ACK | (data.ep0_tog ? USBFS_EP_T_TOG : 0); - data.ep0_tog = !data.ep0_tog; - } else if (data.isochronous[ep]) { - EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NYET; - } else { - EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_ACK; - } - } else { - xfer->valid = false; - EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NAK; - dcd_event_xfer_complete(rhport, ep | TUSB_DIR_IN_MASK, xfer->processed_len, - XFER_RESULT_SUCCESS, true); - } + struct usb_xfer* xfer = &data.xfer[ep][TUSB_DIR_IN]; + if (xfer->valid) { + if (force || xfer->len) { + size_t len = TU_MIN(xfer->max_size, xfer->len); + if (ep == 0) { + memcpy(data.buffer[ep][TUSB_DIR_OUT], xfer->buffer, len); // ep0 uses same chunk + } else if (ep == 3) { + memcpy(data.ep3_buffer.in, xfer->buffer, len); + } else { + memcpy(data.buffer[ep][TUSB_DIR_IN], xfer->buffer, len); + } + xfer->buffer += len; + xfer->len -= len; + xfer->processed_len += len; + + EP_TX_LEN(ep) = len; + if (ep == 0) { + EP_TX_CTRL(0) = USBFS_EP_T_RES_ACK | (data.ep0_tog ? USBFS_EP_T_TOG : 0); + data.ep0_tog = !data.ep0_tog; + } else if (data.isochronous[ep]) { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NYET; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_ACK; + } + } else { + xfer->valid = false; + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK)) | USBFS_EP_T_RES_NAK; + dcd_event_xfer_complete( + rhport, ep | TUSB_DIR_IN_MASK, xfer->processed_len, + XFER_RESULT_SUCCESS, true); } + } } static void update_out(uint8_t rhport, uint8_t ep, size_t rx_len) { - struct usb_xfer *xfer = &data.xfer[ep][TUSB_DIR_OUT]; - if (xfer->valid) { - size_t len = TU_MIN(xfer->max_size, TU_MIN(xfer->len, rx_len)); - if (ep == 3) { - memcpy(xfer->buffer, data.ep3_buffer.out, len); - } else { - memcpy(xfer->buffer, data.buffer[ep][TUSB_DIR_OUT], len); - } - xfer->buffer += len; - xfer->len -= len; - xfer->processed_len += len; - - if (xfer->len == 0 || len < xfer->max_size) { - xfer->valid = false; - dcd_event_xfer_complete(rhport, ep, xfer->processed_len, XFER_RESULT_SUCCESS, true); - } - - if (ep == 0) { - EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; - } + struct usb_xfer* xfer = &data.xfer[ep][TUSB_DIR_OUT]; + if (xfer->valid) { + size_t len = TU_MIN(xfer->max_size, TU_MIN(xfer->len, rx_len)); + if (ep == 3) { + memcpy(xfer->buffer, data.ep3_buffer.out, len); + } else { + memcpy(xfer->buffer, data.buffer[ep][TUSB_DIR_OUT], len); } -} + xfer->buffer += len; + xfer->len -= len; + xfer->processed_len += len; -/* public functions */ -void dcd_init(uint8_t rhport) { - // init registers - USBOTG_FS->BASE_CTRL = USBFS_CTRL_SYS_CTRL | USBFS_CTRL_INT_BUSY | USBFS_CTRL_DMA_EN; - USBOTG_FS->UDEV_CTRL = USBFS_UDEV_CTRL_PD_DIS | USBFS_UDEV_CTRL_PORT_EN; - USBOTG_FS->DEV_ADDR = 0x00; - - USBOTG_FS->INT_FG = 0xFF; - USBOTG_FS->INT_EN = USBFS_INT_EN_BUS_RST | USBFS_INT_EN_TRANSFER | USBFS_INT_EN_SUSPEND; - - // setup endpoint 0 - EP_DMA(0) = (uint32_t) &data.buffer[0][0]; - EP_TX_LEN(0) = 0; - EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; - EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + if (xfer->len == 0 || len < xfer->max_size) { + xfer->valid = false; + dcd_event_xfer_complete(rhport, ep, xfer->processed_len, XFER_RESULT_SUCCESS, true); + } - // enable other endpoints but NAK everything - USBOTG_FS->UEP4_1_MOD = 0xCC; - USBOTG_FS->UEP2_3_MOD = 0xCC; - USBOTG_FS->UEP5_6_MOD = 0xCC; - USBOTG_FS->UEP7_MOD = 0x0C; - - for (uint8_t ep = 1; ep < EP_MAX; ep++) { - EP_DMA(ep) = (uint32_t) &data.buffer[ep][0]; - EP_TX_LEN(ep) = 0; - EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; - EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NAK; + if (ep == 0) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; } - EP_DMA(3) = (uint32_t) &data.ep3_buffer.out[0]; + } +} - dcd_connect(rhport); +/* public functions */ +void dcd_init(uint8_t rhport) { + // init registers + USBOTG_FS->BASE_CTRL = USBFS_CTRL_SYS_CTRL | USBFS_CTRL_INT_BUSY | USBFS_CTRL_DMA_EN; + USBOTG_FS->UDEV_CTRL = USBFS_UDEV_CTRL_PD_DIS | USBFS_UDEV_CTRL_PORT_EN; + USBOTG_FS->DEV_ADDR = 0x00; + + USBOTG_FS->INT_FG = 0xFF; + USBOTG_FS->INT_EN = USBFS_INT_EN_BUS_RST | USBFS_INT_EN_TRANSFER | USBFS_INT_EN_SUSPEND; + + // setup endpoint 0 + EP_DMA(0) = (uint32_t) &data.buffer[0][0]; + EP_TX_LEN(0) = 0; + EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + + // enable other endpoints but NAK everything + USBOTG_FS->UEP4_1_MOD = 0xCC; + USBOTG_FS->UEP2_3_MOD = 0xCC; + USBOTG_FS->UEP5_6_MOD = 0xCC; + USBOTG_FS->UEP7_MOD = 0x0C; + + for (uint8_t ep = 1; ep < EP_MAX; ep++) { + EP_DMA(ep) = (uint32_t) &data.buffer[ep][0]; + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NAK; + } + EP_DMA(3) = (uint32_t) &data.ep3_buffer.out[0]; + + dcd_connect(rhport); } void dcd_int_handler(uint8_t rhport) { - (void) rhport; - uint8_t status = USBOTG_FS->INT_FG; - if (status & USBFS_INT_FG_TRANSFER) { - uint8_t ep = USBFS_INT_ST_MASK_UIS_ENDP(USBOTG_FS->INT_ST); - uint8_t token = USBFS_INT_ST_MASK_UIS_TOKEN(USBOTG_FS->INT_ST); - - switch (token) { - case PID_OUT: { - uint16_t rx_len = USBOTG_FS->RX_LEN; - update_out(rhport, ep, rx_len); - break; - } - - case PID_IN: - update_in(rhport, ep, false); - break; - - case PID_SETUP: - data.ep0_tog = true; - dcd_edpt_clear_stall(rhport, tu_edpt_addr(0, TUSB_DIR_IN)); // setup clears stall - dcd_edpt_clear_stall(rhport, tu_edpt_addr(0, TUSB_DIR_OUT)); - dcd_event_setup_received(rhport, &data.buffer[0][TUSB_DIR_OUT][0], true); - break; - } - - USBOTG_FS->INT_FG = USBFS_INT_FG_TRANSFER; - } else if (status & USBFS_INT_FG_BUS_RST) { + (void) rhport; + uint8_t status = USBOTG_FS->INT_FG; + if (status & USBFS_INT_FG_TRANSFER) { + uint8_t ep = USBFS_INT_ST_MASK_UIS_ENDP(USBOTG_FS->INT_ST); + uint8_t token = USBFS_INT_ST_MASK_UIS_TOKEN(USBOTG_FS->INT_ST); + + switch (token) { + case PID_OUT: { + uint16_t rx_len = USBOTG_FS->RX_LEN; + update_out(rhport, ep, rx_len); + break; + } + + case PID_IN: + update_in(rhport, ep, false); + break; + + case PID_SETUP: + // setup clears stall + EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + data.ep0_tog = true; - data.xfer[0][TUSB_DIR_OUT].max_size = 64; - data.xfer[0][TUSB_DIR_IN].max_size = 64; + dcd_event_setup_received(rhport, &data.buffer[0][TUSB_DIR_OUT][0], true); + break; + } - dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true); + USBOTG_FS->INT_FG = USBFS_INT_FG_TRANSFER; + } else if (status & USBFS_INT_FG_BUS_RST) { + data.ep0_tog = true; + data.xfer[0][TUSB_DIR_OUT].max_size = 64; + data.xfer[0][TUSB_DIR_IN].max_size = 64; - USBOTG_FS->DEV_ADDR = 0x00; - EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true); - USBOTG_FS->INT_FG = USBFS_INT_FG_BUS_RST; - } else if (status & USBFS_INT_FG_SUSPEND) { - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SUSPEND }; - dcd_event_handler(&event, true); - USBOTG_FS->INT_FG = USBFS_INT_FG_SUSPEND; - } + USBOTG_FS->DEV_ADDR = 0x00; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + + USBOTG_FS->INT_FG = USBFS_INT_FG_BUS_RST; + } else if (status & USBFS_INT_FG_SUSPEND) { + dcd_event_t event = {.rhport = rhport, .event_id = DCD_EVENT_SUSPEND}; + dcd_event_handler(&event, true); + USBOTG_FS->INT_FG = USBFS_INT_FG_SUSPEND; + } } void dcd_int_enable(uint8_t rhport) { - (void) rhport; - NVIC_EnableIRQ(USBHD_IRQn); + (void) rhport; + NVIC_EnableIRQ(USBHD_IRQn); } void dcd_int_disable(uint8_t rhport) { - (void) rhport; - NVIC_DisableIRQ(USBHD_IRQn); + (void) rhport; + NVIC_DisableIRQ(USBHD_IRQn); } void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { - (void) dev_addr; - dcd_edpt_xfer(rhport, 0x80, NULL, 0); // zlp status response + (void) dev_addr; + dcd_edpt_xfer(rhport, 0x80, NULL, 0); // zlp status response } void dcd_remote_wakeup(uint8_t rhport) { - (void) rhport; - // TODO optional + (void) rhport; + // TODO optional } void dcd_connect(uint8_t rhport) { - (void) rhport; - USBOTG_FS->BASE_CTRL |= USBFS_CTRL_DEV_PUEN; + (void) rhport; + USBOTG_FS->BASE_CTRL |= USBFS_CTRL_DEV_PUEN; } void dcd_disconnect(uint8_t rhport) { - (void) rhport; - USBOTG_FS->BASE_CTRL &= ~USBFS_CTRL_DEV_PUEN; + (void) rhport; + USBOTG_FS->BASE_CTRL &= ~USBFS_CTRL_DEV_PUEN; } -void dcd_sof_enable(uint8_t rhport, bool en) -{ +void dcd_sof_enable(uint8_t rhport, bool en) { (void) rhport; (void) en; // TODO implement later } -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { - (void) rhport; - if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && - request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && - request->bRequest == TUSB_REQ_SET_ADDRESS) { - USBOTG_FS->DEV_ADDR = (uint8_t) request->wValue; - } - EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; - EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const* request) { + (void) rhport; + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && + request->bRequest == TUSB_REQ_SET_ADDRESS) { + USBOTG_FS->DEV_ADDR = (uint8_t) request->wValue; + } + EP_TX_CTRL(0) = USBFS_EP_T_RES_NAK; + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; } -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { - (void) rhport; - uint8_t ep = tu_edpt_number(desc_ep->bEndpointAddress); - uint8_t dir = tu_edpt_dir(desc_ep->bEndpointAddress); - TU_ASSERT(ep < EP_MAX); - - data.isochronous[ep] = desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS; - data.xfer[ep][dir].max_size = tu_edpt_packet_size(desc_ep); - - if (ep != 0) { - if (dir == TUSB_DIR_OUT) { - if (data.isochronous[ep]) { - EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NYET; - } else { - EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_ACK; - } - } else { - EP_TX_LEN(ep) = 0; - EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; - } +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const* desc_ep) { + (void) rhport; + uint8_t ep = tu_edpt_number(desc_ep->bEndpointAddress); + uint8_t dir = tu_edpt_dir(desc_ep->bEndpointAddress); + TU_ASSERT(ep < EP_MAX); + + data.isochronous[ep] = desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS; + data.xfer[ep][dir].max_size = tu_edpt_packet_size(desc_ep); + + if (ep != 0) { + if (dir == TUSB_DIR_OUT) { + if (data.isochronous[ep]) { + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_NYET; + } else { + EP_RX_CTRL(ep) = USBFS_EP_R_AUTO_TOG | USBFS_EP_R_RES_ACK; + } + } else { + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBFS_EP_T_AUTO_TOG | USBFS_EP_T_RES_NAK; } - return true; + } + return true; } void dcd_edpt_close_all(uint8_t rhport) { - (void) rhport; - // TODO optional + (void) rhport; + // TODO optional } void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; - (void) ep_addr; - // TODO optional + (void) rhport; + (void) ep_addr; + // TODO optional } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { - (void) rhport; - uint8_t ep = tu_edpt_number(ep_addr); - uint8_t dir = tu_edpt_dir(ep_addr); - - struct usb_xfer *xfer = &data.xfer[ep][dir]; - dcd_int_disable(rhport); - xfer->valid = true; - xfer->buffer = buffer; - xfer->len = total_bytes; - xfer->processed_len = 0; - dcd_int_enable(rhport); - - if (dir == TUSB_DIR_IN) { - update_in(rhport, ep, true); - } - return true; +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + + struct usb_xfer* xfer = &data.xfer[ep][dir]; + dcd_int_disable(rhport); + xfer->valid = true; + xfer->buffer = buffer; + xfer->len = total_bytes; + xfer->processed_len = 0; + dcd_int_enable(rhport); + + if (dir == TUSB_DIR_IN) { + update_in(rhport, ep, true); + } + return true; } void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; - uint8_t ep = tu_edpt_number(ep_addr); - uint8_t dir = tu_edpt_dir(ep_addr); - if (ep == 0) { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(0) = USBFS_EP_R_RES_STALL; - } else { - EP_TX_LEN(0) = 0; - EP_TX_CTRL(0) = USBFS_EP_T_RES_STALL; - } + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + if (ep == 0) { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_STALL; } else { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~USBFS_EP_R_RES_MASK) | USBFS_EP_R_RES_STALL; - } else { - EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~USBFS_EP_T_RES_MASK) | USBFS_EP_T_RES_STALL; - } + EP_TX_LEN(0) = 0; + EP_TX_CTRL(0) = USBFS_EP_T_RES_STALL; } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~USBFS_EP_R_RES_MASK) | USBFS_EP_R_RES_STALL; + } else { + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~USBFS_EP_T_RES_MASK) | USBFS_EP_T_RES_STALL; + } + } } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; - uint8_t ep = tu_edpt_number(ep_addr); - uint8_t dir = tu_edpt_dir(ep_addr); - if (ep == 0) { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; - } + (void) rhport; + uint8_t ep = tu_edpt_number(ep_addr); + uint8_t dir = tu_edpt_dir(ep_addr); + if (ep == 0) { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; + } + } else { + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~(USBFS_EP_R_RES_MASK | USBFS_EP_R_TOG)) | USBFS_EP_R_RES_ACK; } else { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(ep) = (EP_RX_CTRL(ep) & ~(USBFS_EP_R_RES_MASK | USBFS_EP_R_TOG)) | USBFS_EP_R_RES_ACK; - } else { - EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK | USBFS_EP_T_TOG)) | USBFS_EP_T_RES_NAK; - } + EP_TX_CTRL(ep) = (EP_TX_CTRL(ep) & ~(USBFS_EP_T_RES_MASK | USBFS_EP_T_TOG)) | USBFS_EP_T_RES_NAK; } + } } -#endif // CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_CH32V20X) +#endif -- cgit v1.3.1 From 869e5e950c545459788cb67d9063f3489f5c5e54 Mon Sep 17 00:00:00 2001 From: dkrasutski Date: Sat, 30 Dec 2023 03:04:43 +0200 Subject: bugfix(ch32-hs-dcd): fix ch32 DATAx managment and long packet transmission --- src/portable/wch/ch32_usbhs_reg.h | 21 +-- src/portable/wch/dcd_ch32_usbhs.c | 379 ++++++++++++++++++-------------------- 2 files changed, 194 insertions(+), 206 deletions(-) (limited to 'src/portable') diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index a3a41bb6a..7428285a5 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -99,12 +99,16 @@ #define USBHS_ISO_ACT_FLAG (1 << 6) // INT_ST -#define USBHS_INT_ST_OFFSET 0x0B -#define USBHS_DEV_UIS_IS_NAK (1 << 7) -#define USBHS_DEV_UIS_TOG_OK (1 << 6) -#define MASK_UIS_TOKEN (3 << 4) -#define MASK_UIS_ENDP (0x0F) -#define MASK_UIS_H_RES (0x0F) +#define USBHS_INT_ST_OFFSET 0x0B +#define USBHS_DEV_UIS_IS_NAK (1 << 7) +#define USBHS_DEV_UIS_TOG_OK (1 << 6) +#define MASK_UIS_TOKEN (3 << 4) +#define USBHS_TOKEN_PID_OUT (0 << 4) +#define USBHS_TOKEN_PID_SOF (1 << 4) +#define USBHS_TOKEN_PID_IN (2 << 4) +#define USBHS_TOKEN_PID_SETUP (3 << 4) +#define MASK_UIS_ENDP (0x0F) +#define MASK_UIS_H_RES (0x0F) #define USBHS_TOGGLE_OK (0x40) #define USBHS_HOST_RES (0x0f) @@ -367,10 +371,5 @@ #define USBHS_UH_T_TOG_AUTO (1 << 5) #define USBHS_UH_T_DATA_NO (1 << 6) -// 00: OUT, 01:SOF, 10:IN, 11:SETUP -#define PID_OUT 0 -#define PID_SOF 1 -#define PID_IN 2 -#define PID_SETUP 3 #endif diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 9a12fc97f..0313c0a69 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -2,6 +2,7 @@ * The MIT License (MIT) * * Copyright (c) 2022 Greg Davill + * Copyright (c) 2023 Denis Krasutski * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -33,32 +34,99 @@ #include "device/dcd.h" // Max number of bi-directional endpoints including EP0 -#define EP_MAX 16 +#define EP_MAX 16 +#define CH32_USBHS_EP0_MAX_SIZE (64) typedef struct { uint8_t *buffer; - // tu_fifo_t * ff; // TODO support dcd_edpt_xfer_fifo API uint16_t total_len; uint16_t queued_len; uint16_t max_size; - bool short_packet; + bool is_last_packet; } xfer_ctl_t; +typedef enum { + EP_RESPONSE_ACK, + EP_RESPONSE_NAK, +} ep_response_list_t; + #define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir] static xfer_ctl_t xfer_status[EP_MAX][2]; -#define EP_TX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_TX_LEN) + (ep)*2) -#define EP_TX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_TX_CTRL) + (ep)*4) -#define EP_RX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_RX_CTRL) + (ep)*4) -#define EP_RX_MAX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_MAX_LEN) + (ep)*2) +#define EP_TX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_TX_LEN) + (ep) * 2) +#define EP_TX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_TX_CTRL) + (ep) * 4) +#define EP_RX_CTRL(ep) *(volatile uint8_t *)((volatile uint8_t *)&(USBHSD->UEP0_RX_CTRL) + (ep) * 4) +#define EP_RX_MAX_LEN(ep) *(volatile uint16_t *)((volatile uint16_t *)&(USBHSD->UEP0_MAX_LEN) + (ep) * 2) #define EP_TX_DMA_ADDR(ep) *(volatile uint32_t *)((volatile uint32_t *)&(USBHSD->UEP1_TX_DMA) + (ep - 1)) #define EP_RX_DMA_ADDR(ep) *(volatile uint32_t *)((volatile uint32_t *)&(USBHSD->UEP1_RX_DMA) + (ep - 1)) /* Endpoint Buffer */ -TU_ATTR_ALIGNED(4) uint8_t EP0_DatabufHD[64]; // ep0(64) +TU_ATTR_ALIGNED(4) static uint8_t ep0_data_in_out_buffer[CH32_USBHS_EP0_MAX_SIZE]; + +static void ep_set_response_and_toggle(uint8_t ep_addr, ep_response_list_t response_type) { + uint8_t const ep_num = tu_edpt_number(ep_addr); + if (ep_addr & TUSB_DIR_IN_MASK) { + uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_T_RES_ACK : USBHS_EP_T_RES_NAK; + if (ep_num == 0) { + if (response_type == EP_RESPONSE_ACK) { + if (EP_TX_LEN(ep_num) == 0) { + EP_TX_CTRL(ep_num) |= USBHS_EP_T_TOG_1; + } else { + EP_TX_CTRL(ep_num) ^= USBHS_EP_T_TOG_1; + } + } + } + EP_TX_CTRL(ep_num) = (EP_TX_CTRL(ep_num) & ~(USBHS_EP_T_RES_MASK)) | response; + } else { + uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_R_RES_ACK : USBHS_EP_R_RES_NAK; + if (ep_num == 0) { + if (response_type == EP_RESPONSE_ACK) { + if (xfer_status[ep_num][TUSB_DIR_OUT].queued_len == 0) { + EP_RX_CTRL(ep_num) |= USBHS_EP_R_TOG_1; + } + } else { + EP_RX_CTRL(ep_num) ^= USBHS_EP_R_TOG_1; + } + } + EP_RX_CTRL(ep_num) = (EP_RX_CTRL(ep_num) & ~(USBHS_EP_R_RES_MASK)) | response; + } +} + +static void xfer_data_packet(uint8_t ep_addr, xfer_ctl_t *xfer) { + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); -volatile uint8_t USBHS_Dev_Endp0_Tog = 0x01; + if (dir == TUSB_DIR_IN) { + uint16_t remaining = xfer->total_len - xfer->queued_len; + uint16_t next_tx_size = TU_MIN(remaining, xfer->max_size); + + if (ep_num == 0) { + memcpy(ep0_data_in_out_buffer, &xfer->buffer[xfer->queued_len], next_tx_size); + } else { + EP_TX_DMA_ADDR(ep_num) = (uint32_t)&xfer->buffer[xfer->queued_len]; + } + + EP_TX_LEN(ep_num) = next_tx_size; + xfer->queued_len += next_tx_size; + if (xfer->queued_len == xfer->total_len) { + xfer->is_last_packet = true; + } + } else { /* TUSB_DIR_OUT */ + uint16_t left_to_receive = xfer->total_len - xfer->queued_len; + uint16_t max_possible_rx_size = TU_MIN(xfer->max_size, left_to_receive); + + if (max_possible_rx_size == left_to_receive) { + xfer->is_last_packet = true; + } + + if (ep_num > 0) { + EP_RX_DMA_ADDR(ep_num) = (uint32_t)&xfer->buffer[xfer->queued_len]; + EP_RX_MAX_LEN(ep_num) = max_possible_rx_size; + } + } + ep_set_response_and_toggle(ep_addr, USBHS_EP_R_RES_ACK); +} void dcd_init(uint8_t rhport) { (void)rhport; @@ -80,29 +148,23 @@ void dcd_init(uint8_t rhport) { USBHSD->INT_EN = 0; USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN; - /* ALL endpoint enable */ - USBHSD->ENDP_CONFIG = 0xffffffff; - USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; USBHSD->ENDP_TYPE = 0x00; USBHSD->BUF_MODE = 0x00; - USBHSD->UEP0_MAX_LEN = 64; - - USBHSD->UEP0_DMA = (uint32_t)EP0_DatabufHD; - - USBHSD->UEP0_TX_LEN = 0; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_NAK; - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK; - - for (int ep = 1; ep < EP_MAX; ep++) { + for (int ep = 0; ep < EP_MAX; ep++) { EP_TX_LEN(ep) = 0; EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - EP_RX_MAX_LEN(ep) = 512; + EP_RX_MAX_LEN(ep) = 0; } + USBHSD->UEP0_DMA = (uint32_t)ep0_data_in_out_buffer; + USBHSD->UEP0_MAX_LEN = CH32_USBHS_EP0_MAX_SIZE; + xfer_status[0][TUSB_DIR_OUT].max_size = CH32_USBHS_EP0_MAX_SIZE; + xfer_status[0][TUSB_DIR_IN].max_size = CH32_USBHS_EP0_MAX_SIZE; + USBHSD->DEV_AD = 0; USBHSD->CONTROL |= USBHS_DEV_PU_EN; } @@ -121,6 +183,16 @@ void dcd_int_disable(uint8_t rhport) { void dcd_edpt_close_all(uint8_t rhport) { (void)rhport; + + for (size_t ep = 1; ep < EP_MAX; ep++) { + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; + EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + + EP_RX_MAX_LEN(ep) = 0; + } + + USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; } void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { @@ -130,9 +202,8 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { dcd_edpt_xfer(rhport, 0x80, NULL, 0); } -void dcd_remote_wakeup(uint8_t rhport) -{ - (void) rhport; +void dcd_remote_wakeup(uint8_t rhport) { + (void)rhport; } void dcd_sof_enable(uint8_t rhport, bool en) @@ -154,246 +225,164 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *req USBHSD->DEV_AD = (uint8_t)request->wValue; } - EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK; - EP_RX_CTRL(0) = USBHS_EP_R_RES_ACK; + EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + EP_RX_CTRL(0) = USBHS_EP_R_RES_NAK | USBHS_EP_R_TOG_0; } bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt) { (void)rhport; - uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress); - uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + uint8_t const ep_num = tu_edpt_number(desc_edpt->bEndpointAddress); + tusb_dir_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + + TU_ASSERT(ep_num < EP_MAX); - TU_ASSERT(epnum < EP_MAX); + if (ep_num == 0) { + return true; + } - xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir); + xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, dir); xfer->max_size = tu_edpt_packet_size(desc_edpt); - if (epnum != 0) { - if (tu_edpt_dir(desc_edpt->bEndpointAddress) == TUSB_DIR_OUT) { - EP_RX_CTRL(epnum) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_ACK; - } else { - EP_TX_LEN(epnum) = 0; - EP_TX_CTRL(epnum) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + bool is_iso = (desc_edpt->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS); + if (dir == TUSB_DIR_OUT) { + USBHSD->ENDP_CONFIG |= (USBHS_EP0_R_EN << ep_num); + EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + if (is_iso == true) { + USBHSD->ENDP_TYPE |= (USBHS_EP0_R_TYP << ep_num); + } + EP_RX_MAX_LEN(ep_num) = xfer->max_size; + } else { + USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); + if (is_iso == true) { + USBHSD->ENDP_TYPE |= (USBHS_EP0_T_TYP << ep_num); } + EP_TX_LEN(ep_num) = 0; + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; } return true; } -int usbd_ep_close(const uint8_t ep) { - (void)ep; +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; - return 0; + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); + + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + EP_RX_MAX_LEN(ep_num) = 0; + USBHSD->ENDP_TYPE &= ~(USBHS_EP0_R_TYP << ep_num); + USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_R_EN << ep_num); + } else { // TUSB_DIR_IN + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + EP_TX_LEN(ep_num) = 0; + USBHSD->ENDP_TYPE &= ~(USBHS_EP0_T_TYP << ep_num); + USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); + } } + void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); - if (epnum == 0) { - if (dir == TUSB_DIR_OUT) { - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_STALL; - } else { - USBHSD->UEP0_TX_LEN = 0; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_STALL; - } + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep_num) = USBHS_EP_R_RES_STALL; } else { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(epnum) = (EP_RX_CTRL(epnum) & ~USBHS_EP_R_RES_MASK) | USBHS_EP_R_RES_STALL; - - } else { - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~USBHS_EP_T_RES_MASK) | USBHS_EP_T_RES_STALL; - } + EP_TX_LEN(0) = 0; + EP_TX_CTRL(ep_num) = USBHS_EP_T_RES_STALL; } } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); - if (epnum == 0) { - if (dir == TUSB_DIR_OUT) { - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK; - } else { - } + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; } else { - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(epnum) = (EP_RX_CTRL(epnum) & ~(USBHS_EP_R_RES_MASK | USBHS_EP_T_TOG_MASK)) | USBHS_EP_T_RES_ACK; - - } else { - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK | USBHS_EP_T_TOG_MASK)) | USBHS_EP_T_RES_NAK; - } + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_R_RES_NAK; } } bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { (void)rhport; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir); + xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, dir); xfer->buffer = buffer; - // xfer->ff = NULL; // TODO support dcd_edpt_xfer_fifo API xfer->total_len = total_bytes; xfer->queued_len = 0; - xfer->short_packet = false; - - // uint16_t num_packets = (total_bytes / xfer->max_size); - uint16_t short_packet_size = total_bytes % (xfer->max_size + 1); - - // Zero-size packet is special case. - if (short_packet_size == 0 || (total_bytes == 0)) { - xfer->short_packet = true; - } - - if (tu_edpt_dir(ep_addr) == TUSB_DIR_IN) { - if (!total_bytes) { - xfer->short_packet = true; - if (epnum == 0) { - USBHSD->UEP0_TX_LEN = 0; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_ACK | (USBHS_Dev_Endp0_Tog ? USBHS_EP_T_TOG_1 : USBHS_EP_T_TOG_0); - USBHS_Dev_Endp0_Tog ^= 1; - } else { - EP_TX_LEN(epnum) = 0; - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_ACK; - } - } else { - if (epnum == 0) { - xfer->queued_len += short_packet_size; - memcpy(&EP0_DatabufHD[0], buffer, short_packet_size); - - USBHSD->UEP0_TX_LEN = short_packet_size; - USBHSD->UEP0_TX_CTRL = USBHS_EP_T_RES_ACK | (USBHS_Dev_Endp0_Tog ? USBHS_EP_T_TOG_1 : USBHS_EP_T_TOG_0); - USBHS_Dev_Endp0_Tog ^= 1; - } else { - xfer->queued_len += short_packet_size; - - EP_TX_DMA_ADDR(epnum) = (uint32_t)buffer; - USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << epnum); - EP_TX_LEN(epnum) = short_packet_size; - EP_TX_CTRL(epnum) = (EP_TX_CTRL(epnum) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_ACK; - } - } - } else { /* TUSB_DIR_OUT */ - if (epnum == 0) { - uint32_t read_count = USBHSD->RX_LEN; - read_count = TU_MIN(read_count, total_bytes); + xfer->is_last_packet = false; - if ((total_bytes == 8)) { - read_count = 8; - memcpy(buffer, &EP0_DatabufHD[0], 8); - } else { - memcpy(buffer, &EP0_DatabufHD[0], read_count); - } - } else { - EP_RX_DMA_ADDR(epnum) = (uint32_t)xfer->buffer; - USBHSD->ENDP_CONFIG |= (USBHS_EP0_R_EN << epnum); - } + xfer_data_packet(ep_addr, xfer); - // usbd_ep_read(ep_addr, buffer, total_bytes, &ret_bytes); - } return true; } - -static void receive_packet(xfer_ctl_t *xfer, uint16_t xfer_size) { - // xfer->queued_len = xfer->total_len - remaining; - - uint16_t remaining = xfer->total_len - xfer->queued_len; - uint16_t to_recv_size; - - if (remaining <= xfer->max_size) { - // Avoid buffer overflow. - to_recv_size = (xfer_size > remaining) ? remaining : xfer_size; - } else { - // Room for full packet, choose recv_size based on what the microcontroller - // claims. - to_recv_size = (xfer_size > xfer->max_size) ? xfer->max_size : xfer_size; - } - - if (to_recv_size) { - } - - xfer->queued_len += xfer_size; - - // Per USB spec, a short OUT packet (including length 0) is always - // indicative of the end of a transfer (at least for ctl, bulk, int). - xfer->short_packet = (xfer_size < xfer->max_size); -} - void dcd_int_handler(uint8_t rhport) { (void)rhport; - uint32_t end_num, rx_token; - uint8_t intflag = 0; - - intflag = USBHSD->INT_FG; - - if (intflag & USBHS_TRANSFER_FLAG) { + uint8_t int_flag = USBHSD->INT_FG; + uint8_t int_status = USBHSD->INT_ST; - end_num = (USBHSD->INT_ST) & MASK_UIS_ENDP; - rx_token = (((USBHSD->INT_ST) & MASK_UIS_TOKEN) >> 4) & 0x03; + if (int_flag & USBHS_TRANSFER_FLAG) { - uint8_t endp = end_num | (rx_token == PID_IN ? TUSB_DIR_IN_MASK : 0); + uint8_t ep_num = int_status & MASK_UIS_ENDP; + uint8_t rx_token = int_status & MASK_UIS_TOKEN; - xfer_ctl_t *xfer = XFER_CTL_BASE(end_num, tu_edpt_dir(endp)); + uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; - if (rx_token == PID_SOF) { - dcd_event_sof(rhport, USBHSD->FRAME_NO, true); + xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); - } else if (rx_token == PID_OUT) { + if (rx_token == USBHS_TOKEN_PID_OUT) { uint16_t rx_len = USBHSD->RX_LEN; - receive_packet(xfer, rx_len); - - if (xfer->short_packet || (xfer->queued_len == xfer->total_len)) { - xfer->short_packet = false; - - dcd_event_xfer_complete(0, endp, xfer->queued_len, XFER_RESULT_SUCCESS, true); + if (ep_num == 0) { + memcpy(&xfer->buffer[xfer->queued_len], ep0_data_in_out_buffer, rx_len); } - if (end_num == 0) { - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; + xfer->queued_len += rx_len; + if (rx_len < xfer->max_size) { + xfer->is_last_packet = true; } - } else if (rx_token == PID_IN) { - if (xfer->short_packet || (xfer->queued_len == xfer->total_len)) { - xfer->short_packet = false; - xfer->total_len = 0; - dcd_event_xfer_complete(0, endp, xfer->queued_len, XFER_RESULT_SUCCESS, true); - - EP_TX_CTRL(end_num) = (EP_TX_CTRL(end_num) & ~(USBHS_EP_T_RES_MASK)) | USBHS_EP_T_RES_NAK; + } else if (rx_token == USBHS_TOKEN_PID_IN) { + // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet + // Common processing below + } - if (end_num == 0) { - } - } else { - dcd_edpt_xfer(0, endp, xfer->buffer + xfer->queued_len, xfer->total_len - xfer->queued_len); - } + if (xfer->is_last_packet == true) { + ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); + dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); + } else { + /* prepare next part of packet to xref */ + xfer_data_packet(ep_addr, xfer); } USBHSD->INT_FG = USBHS_TRANSFER_FLAG; /* Clear flag */ - } else if (intflag & USBHS_SETUP_FLAG) { - USBHS_Dev_Endp0_Tog = 1; - dcd_event_setup_received(0, EP0_DatabufHD, true); + } else if (int_flag & USBHS_SETUP_FLAG) { + ep_set_response_and_toggle(0x80, EP_RESPONSE_NAK); + ep_set_response_and_toggle(0x00, EP_RESPONSE_NAK); + dcd_event_setup_received(0, ep0_data_in_out_buffer, true); USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ - } else if (intflag & USBHS_DETECT_FLAG) { - USBHS_Dev_Endp0_Tog = 1; - - xfer_status[0][TUSB_DIR_OUT].max_size = 64; - xfer_status[0][TUSB_DIR_IN].max_size = 64; + } else if (int_flag & USBHS_DETECT_FLAG) { dcd_event_bus_reset(0, TUSB_SPEED_HIGH, true); USBHSD->DEV_AD = 0; - USBHSD->UEP0_RX_CTRL = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; + EP_RX_CTRL(0) = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; + EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; USBHSD->INT_FG = USBHS_DETECT_FLAG; /* Clear flag */ - } else if (intflag & USBHS_SUSPEND_FLAG) { + } else if (int_flag & USBHS_SUSPEND_FLAG) { dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SUSPEND }; dcd_event_handler(&event, true); -- cgit v1.3.1 From 3e604d1d5498cace44179026fe3ca017920704fe Mon Sep 17 00:00:00 2001 From: Denis Krasutski Date: Thu, 4 Jan 2024 12:22:11 +0200 Subject: fix(ch32, iso): fix iso IN transfers for CH32 --- src/portable/wch/dcd_ch32_usbhs.c | 76 +++++++++++++++++++++++++++++---------- 1 file changed, 58 insertions(+), 18 deletions(-) (limited to 'src/portable') diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 0313c0a69..42b15bf06 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -43,6 +43,7 @@ typedef struct { uint16_t queued_len; uint16_t max_size; bool is_last_packet; + bool is_iso; } xfer_ctl_t; typedef enum { @@ -77,7 +78,11 @@ static void ep_set_response_and_toggle(uint8_t ep_addr, ep_response_list_t respo } } } - EP_TX_CTRL(ep_num) = (EP_TX_CTRL(ep_num) & ~(USBHS_EP_T_RES_MASK)) | response; + if (xfer_status[ep_num][TUSB_DIR_IN].is_iso == true) { + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG; + } else { + EP_TX_CTRL(ep_num) = (EP_TX_CTRL(ep_num) & ~(USBHS_EP_T_RES_MASK)) | response; + } } else { uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_R_RES_ACK : USBHS_EP_R_RES_NAK; if (ep_num == 0) { @@ -112,6 +117,10 @@ static void xfer_data_packet(uint8_t ep_addr, xfer_ctl_t *xfer) { if (xfer->queued_len == xfer->total_len) { xfer->is_last_packet = true; } + if (xfer->is_iso == true) { + /* Enable EP to generate ISA_ACT interrupt */ + USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); + } } else { /* TUSB_DIR_OUT */ uint16_t left_to_receive = xfer->total_len - xfer->queued_len; uint16_t max_possible_rx_size = TU_MIN(xfer->max_size, left_to_receive); @@ -146,7 +155,7 @@ void dcd_init(uint8_t rhport) { #endif USBHSD->INT_EN = 0; - USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN; + USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN | USBHS_ISO_ACT_EN; USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; USBHSD->ENDP_TYPE = 0x00; @@ -244,18 +253,20 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt) { xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, dir); xfer->max_size = tu_edpt_packet_size(desc_edpt); - bool is_iso = (desc_edpt->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS); + xfer->is_iso = (desc_edpt->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS); if (dir == TUSB_DIR_OUT) { USBHSD->ENDP_CONFIG |= (USBHS_EP0_R_EN << ep_num); EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - if (is_iso == true) { + if (xfer->is_iso == true) { USBHSD->ENDP_TYPE |= (USBHS_EP0_R_TYP << ep_num); } EP_RX_MAX_LEN(ep_num) = xfer->max_size; } else { - USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); - if (is_iso == true) { + if (xfer->is_iso == true) { USBHSD->ENDP_TYPE |= (USBHS_EP0_T_TYP << ep_num); + } else { + /* Enable all types except Isochronous to avoid ISO_ACT interrupt generation */ + USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); } EP_TX_LEN(ep_num) = 0; EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; @@ -275,7 +286,7 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { EP_RX_MAX_LEN(ep_num) = 0; USBHSD->ENDP_TYPE &= ~(USBHS_EP0_R_TYP << ep_num); USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_R_EN << ep_num); - } else { // TUSB_DIR_IN + } else { // TUSB_DIR_IN EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; EP_TX_LEN(ep_num) = 0; USBHSD->ENDP_TYPE &= ~(USBHS_EP0_T_TYP << ep_num); @@ -332,30 +343,24 @@ void dcd_int_handler(uint8_t rhport) { uint8_t int_flag = USBHSD->INT_FG; uint8_t int_status = USBHSD->INT_ST; - if (int_flag & USBHS_TRANSFER_FLAG) { - + if (int_flag & USBHS_ISO_ACT_FLAG) { uint8_t ep_num = int_status & MASK_UIS_ENDP; uint8_t rx_token = int_status & MASK_UIS_TOKEN; - uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; - xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); if (rx_token == USBHS_TOKEN_PID_OUT) { uint16_t rx_len = USBHSD->RX_LEN; - if (ep_num == 0) { - memcpy(&xfer->buffer[xfer->queued_len], ep0_data_in_out_buffer, rx_len); - } - xfer->queued_len += rx_len; if (rx_len < xfer->max_size) { xfer->is_last_packet = true; } - } else if (rx_token == USBHS_TOKEN_PID_IN) { - // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet - // Common processing below + if (xfer->is_last_packet == true) { + /* Disable EP to avoid ISO_ACT interrupt generation */ + USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); + } } if (xfer->is_last_packet == true) { @@ -366,6 +371,41 @@ void dcd_int_handler(uint8_t rhport) { xfer_data_packet(ep_addr, xfer); } + USBHSD->INT_FG = USBHS_ISO_ACT_FLAG; /* Clear flag */ + } else if (int_flag & USBHS_TRANSFER_FLAG) { + + uint8_t ep_num = int_status & MASK_UIS_ENDP; + uint8_t rx_token = int_status & MASK_UIS_TOKEN; + uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; + xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); + + if (xfer->is_iso == false) { + if (rx_token == USBHS_TOKEN_PID_OUT) { + uint16_t rx_len = USBHSD->RX_LEN; + + if (ep_num == 0) { + memcpy(&xfer->buffer[xfer->queued_len], ep0_data_in_out_buffer, rx_len); + } + + xfer->queued_len += rx_len; + if (rx_len < xfer->max_size) { + xfer->is_last_packet = true; + } + + } else if (rx_token == USBHS_TOKEN_PID_IN) { + // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet + // Common processing below + } + + if (xfer->is_last_packet == true) { + ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); + dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); + } else { + /* prepare next part of packet to xref */ + xfer_data_packet(ep_addr, xfer); + } + } + USBHSD->INT_FG = USBHS_TRANSFER_FLAG; /* Clear flag */ } else if (int_flag & USBHS_SETUP_FLAG) { ep_set_response_and_toggle(0x80, EP_RESPONSE_NAK); -- cgit v1.3.1 From 4bd72da5cdce4b3ab8f5a9960234a97934672f1c Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 21 May 2024 15:41:59 +0700 Subject: use CFG_TUD_ENDPOINT0_SIZE, rename ep0_data_in_out_buffer to simply ep0_buffer reformat indent to 2 spaces --- src/portable/wch/dcd_ch32_usbhs.c | 552 +++++++++++++++++++------------------- 1 file changed, 274 insertions(+), 278 deletions(-) (limited to 'src/portable') diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 42b15bf06..dbcf19a7b 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -34,21 +34,20 @@ #include "device/dcd.h" // Max number of bi-directional endpoints including EP0 -#define EP_MAX 16 -#define CH32_USBHS_EP0_MAX_SIZE (64) +#define EP_MAX 16 typedef struct { - uint8_t *buffer; - uint16_t total_len; - uint16_t queued_len; - uint16_t max_size; - bool is_last_packet; - bool is_iso; + uint8_t* buffer; + uint16_t total_len; + uint16_t queued_len; + uint16_t max_size; + bool is_last_packet; + bool is_iso; } xfer_ctl_t; typedef enum { - EP_RESPONSE_ACK, - EP_RESPONSE_NAK, + EP_RESPONSE_ACK, + EP_RESPONSE_NAK, } ep_response_list_t; #define XFER_CTL_BASE(_ep, _dir) &xfer_status[_ep][_dir] @@ -63,371 +62,368 @@ static xfer_ctl_t xfer_status[EP_MAX][2]; #define EP_RX_DMA_ADDR(ep) *(volatile uint32_t *)((volatile uint32_t *)&(USBHSD->UEP1_RX_DMA) + (ep - 1)) /* Endpoint Buffer */ -TU_ATTR_ALIGNED(4) static uint8_t ep0_data_in_out_buffer[CH32_USBHS_EP0_MAX_SIZE]; +TU_ATTR_ALIGNED(4) static uint8_t ep0_buffer[CFG_TUD_ENDPOINT0_SIZE]; static void ep_set_response_and_toggle(uint8_t ep_addr, ep_response_list_t response_type) { - uint8_t const ep_num = tu_edpt_number(ep_addr); - if (ep_addr & TUSB_DIR_IN_MASK) { - uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_T_RES_ACK : USBHS_EP_T_RES_NAK; - if (ep_num == 0) { - if (response_type == EP_RESPONSE_ACK) { - if (EP_TX_LEN(ep_num) == 0) { - EP_TX_CTRL(ep_num) |= USBHS_EP_T_TOG_1; - } else { - EP_TX_CTRL(ep_num) ^= USBHS_EP_T_TOG_1; - } - } - } - if (xfer_status[ep_num][TUSB_DIR_IN].is_iso == true) { - EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG; + uint8_t const ep_num = tu_edpt_number(ep_addr); + if (ep_addr & TUSB_DIR_IN_MASK) { + uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_T_RES_ACK : USBHS_EP_T_RES_NAK; + if (ep_num == 0) { + if (response_type == EP_RESPONSE_ACK) { + if (EP_TX_LEN(ep_num) == 0) { + EP_TX_CTRL(ep_num) |= USBHS_EP_T_TOG_1; } else { - EP_TX_CTRL(ep_num) = (EP_TX_CTRL(ep_num) & ~(USBHS_EP_T_RES_MASK)) | response; + EP_TX_CTRL(ep_num) ^= USBHS_EP_T_TOG_1; } + } + } + if (xfer_status[ep_num][TUSB_DIR_IN].is_iso == true) { + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG; } else { - uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_R_RES_ACK : USBHS_EP_R_RES_NAK; - if (ep_num == 0) { - if (response_type == EP_RESPONSE_ACK) { - if (xfer_status[ep_num][TUSB_DIR_OUT].queued_len == 0) { - EP_RX_CTRL(ep_num) |= USBHS_EP_R_TOG_1; - } - } else { - EP_RX_CTRL(ep_num) ^= USBHS_EP_R_TOG_1; - } + EP_TX_CTRL(ep_num) = (EP_TX_CTRL(ep_num) & ~(USBHS_EP_T_RES_MASK)) | response; + } + } else { + uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_R_RES_ACK : USBHS_EP_R_RES_NAK; + if (ep_num == 0) { + if (response_type == EP_RESPONSE_ACK) { + if (xfer_status[ep_num][TUSB_DIR_OUT].queued_len == 0) { + EP_RX_CTRL(ep_num) |= USBHS_EP_R_TOG_1; } - EP_RX_CTRL(ep_num) = (EP_RX_CTRL(ep_num) & ~(USBHS_EP_R_RES_MASK)) | response; + } else { + EP_RX_CTRL(ep_num) ^= USBHS_EP_R_TOG_1; + } } + EP_RX_CTRL(ep_num) = (EP_RX_CTRL(ep_num) & ~(USBHS_EP_R_RES_MASK)) | response; + } } -static void xfer_data_packet(uint8_t ep_addr, xfer_ctl_t *xfer) { - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); +static void xfer_data_packet(uint8_t ep_addr, xfer_ctl_t* xfer) { + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_IN) { - uint16_t remaining = xfer->total_len - xfer->queued_len; - uint16_t next_tx_size = TU_MIN(remaining, xfer->max_size); + if (dir == TUSB_DIR_IN) { + uint16_t remaining = xfer->total_len - xfer->queued_len; + uint16_t next_tx_size = TU_MIN(remaining, xfer->max_size); - if (ep_num == 0) { - memcpy(ep0_data_in_out_buffer, &xfer->buffer[xfer->queued_len], next_tx_size); - } else { - EP_TX_DMA_ADDR(ep_num) = (uint32_t)&xfer->buffer[xfer->queued_len]; - } + if (ep_num == 0) { + memcpy(ep0_buffer, &xfer->buffer[xfer->queued_len], next_tx_size); + } else { + EP_TX_DMA_ADDR(ep_num) = (uint32_t) &xfer->buffer[xfer->queued_len]; + } - EP_TX_LEN(ep_num) = next_tx_size; - xfer->queued_len += next_tx_size; - if (xfer->queued_len == xfer->total_len) { - xfer->is_last_packet = true; - } - if (xfer->is_iso == true) { - /* Enable EP to generate ISA_ACT interrupt */ - USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); - } - } else { /* TUSB_DIR_OUT */ - uint16_t left_to_receive = xfer->total_len - xfer->queued_len; - uint16_t max_possible_rx_size = TU_MIN(xfer->max_size, left_to_receive); + EP_TX_LEN(ep_num) = next_tx_size; + xfer->queued_len += next_tx_size; + if (xfer->queued_len == xfer->total_len) { + xfer->is_last_packet = true; + } + if (xfer->is_iso == true) { + /* Enable EP to generate ISA_ACT interrupt */ + USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); + } + } else { /* TUSB_DIR_OUT */ + uint16_t left_to_receive = xfer->total_len - xfer->queued_len; + uint16_t max_possible_rx_size = TU_MIN(xfer->max_size, left_to_receive); - if (max_possible_rx_size == left_to_receive) { - xfer->is_last_packet = true; - } + if (max_possible_rx_size == left_to_receive) { + xfer->is_last_packet = true; + } - if (ep_num > 0) { - EP_RX_DMA_ADDR(ep_num) = (uint32_t)&xfer->buffer[xfer->queued_len]; - EP_RX_MAX_LEN(ep_num) = max_possible_rx_size; - } + if (ep_num > 0) { + EP_RX_DMA_ADDR(ep_num) = (uint32_t) &xfer->buffer[xfer->queued_len]; + EP_RX_MAX_LEN(ep_num) = max_possible_rx_size; } - ep_set_response_and_toggle(ep_addr, USBHS_EP_R_RES_ACK); + } + ep_set_response_and_toggle(ep_addr, USBHS_EP_R_RES_ACK); } void dcd_init(uint8_t rhport) { - (void)rhport; + (void) rhport; - memset(&xfer_status, 0, sizeof(xfer_status)); + memset(&xfer_status, 0, sizeof(xfer_status)); - USBHSD->HOST_CTRL = 0x00; - USBHSD->HOST_CTRL = USBHS_PHY_SUSPENDM; + USBHSD->HOST_CTRL = 0x00; + USBHSD->HOST_CTRL = USBHS_PHY_SUSPENDM; - USBHSD->CONTROL = 0; + USBHSD->CONTROL = 0; #if TUD_OPT_HIGH_SPEED - USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_HIGH_SPEED; + USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_HIGH_SPEED; #else - #error OPT_MODE_FULL_SPEED not currently supported on CH32 - USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_FULL_SPEED; + #error OPT_MODE_FULL_SPEED not currently supported on CH32 + USBHSD->CONTROL = USBHS_DMA_EN | USBHS_INT_BUSY_EN | USBHS_FULL_SPEED; #endif - USBHSD->INT_EN = 0; - USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN | USBHS_ISO_ACT_EN; + USBHSD->INT_EN = 0; + USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN | USBHS_ISO_ACT_EN; - USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; - USBHSD->ENDP_TYPE = 0x00; - USBHSD->BUF_MODE = 0x00; + USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; + USBHSD->ENDP_TYPE = 0x00; + USBHSD->BUF_MODE = 0x00; - for (int ep = 0; ep < EP_MAX; ep++) { - EP_TX_LEN(ep) = 0; - EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; - EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + for (int ep = 0; ep < EP_MAX; ep++) { + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; + EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - EP_RX_MAX_LEN(ep) = 0; - } + EP_RX_MAX_LEN(ep) = 0; + } - USBHSD->UEP0_DMA = (uint32_t)ep0_data_in_out_buffer; - USBHSD->UEP0_MAX_LEN = CH32_USBHS_EP0_MAX_SIZE; - xfer_status[0][TUSB_DIR_OUT].max_size = CH32_USBHS_EP0_MAX_SIZE; - xfer_status[0][TUSB_DIR_IN].max_size = CH32_USBHS_EP0_MAX_SIZE; + USBHSD->UEP0_DMA = (uint32_t) ep0_buffer; + USBHSD->UEP0_MAX_LEN = CFG_TUD_ENDPOINT0_SIZE; + xfer_status[0][TUSB_DIR_OUT].max_size = CFG_TUD_ENDPOINT0_SIZE; + xfer_status[0][TUSB_DIR_IN].max_size = CFG_TUD_ENDPOINT0_SIZE; - USBHSD->DEV_AD = 0; - USBHSD->CONTROL |= USBHS_DEV_PU_EN; + USBHSD->DEV_AD = 0; + USBHSD->CONTROL |= USBHS_DEV_PU_EN; } void dcd_int_enable(uint8_t rhport) { - (void)rhport; - - NVIC_EnableIRQ(USBHS_IRQn); + (void) rhport; + NVIC_EnableIRQ(USBHS_IRQn); } void dcd_int_disable(uint8_t rhport) { - (void)rhport; - - NVIC_DisableIRQ(USBHS_IRQn); + (void) rhport; + NVIC_DisableIRQ(USBHS_IRQn); } void dcd_edpt_close_all(uint8_t rhport) { - (void)rhport; + (void) rhport; - for (size_t ep = 1; ep < EP_MAX; ep++) { - EP_TX_LEN(ep) = 0; - EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; - EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + for (size_t ep = 1; ep < EP_MAX; ep++) { + EP_TX_LEN(ep) = 0; + EP_TX_CTRL(ep) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK; + EP_RX_CTRL(ep) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - EP_RX_MAX_LEN(ep) = 0; - } + EP_RX_MAX_LEN(ep) = 0; + } - USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; + USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; } void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { - (void)dev_addr; + (void) dev_addr; - // Response with zlp status - dcd_edpt_xfer(rhport, 0x80, NULL, 0); + // Response with zlp status + dcd_edpt_xfer(rhport, 0x80, NULL, 0); } void dcd_remote_wakeup(uint8_t rhport) { - (void)rhport; + (void) rhport; } -void dcd_sof_enable(uint8_t rhport, bool en) -{ - (void) rhport; - if (en) { - USBHSD->INT_EN |= USBHS_SOF_ACT_EN; - } else { - USBHSD->INT_EN &= ~(USBHS_SOF_ACT_EN); - } +void dcd_sof_enable(uint8_t rhport, bool en) { + (void) rhport; + if (en) { + USBHSD->INT_EN |= USBHS_SOF_ACT_EN; + } else { + USBHSD->INT_EN &= ~(USBHS_SOF_ACT_EN); + } } -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { - (void)rhport; +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const* request) { + (void) rhport; - if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && - request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && - request->bRequest == TUSB_REQ_SET_ADDRESS) { - USBHSD->DEV_AD = (uint8_t)request->wValue; - } + if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && + request->bRequest == TUSB_REQ_SET_ADDRESS) { + USBHSD->DEV_AD = (uint8_t) request->wValue; + } - EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; - EP_RX_CTRL(0) = USBHS_EP_R_RES_NAK | USBHS_EP_R_TOG_0; + EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + EP_RX_CTRL(0) = USBHS_EP_R_RES_NAK | USBHS_EP_R_TOG_0; } -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt) { - (void)rhport; +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const* desc_edpt) { + (void) rhport; - uint8_t const ep_num = tu_edpt_number(desc_edpt->bEndpointAddress); - tusb_dir_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); + uint8_t const ep_num = tu_edpt_number(desc_edpt->bEndpointAddress); + tusb_dir_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress); - TU_ASSERT(ep_num < EP_MAX); + TU_ASSERT(ep_num < EP_MAX); - if (ep_num == 0) { - return true; - } + if (ep_num == 0) { + return true; + } - xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, dir); - xfer->max_size = tu_edpt_packet_size(desc_edpt); + xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, dir); + xfer->max_size = tu_edpt_packet_size(desc_edpt); - xfer->is_iso = (desc_edpt->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS); - if (dir == TUSB_DIR_OUT) { - USBHSD->ENDP_CONFIG |= (USBHS_EP0_R_EN << ep_num); - EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - if (xfer->is_iso == true) { - USBHSD->ENDP_TYPE |= (USBHS_EP0_R_TYP << ep_num); - } - EP_RX_MAX_LEN(ep_num) = xfer->max_size; + xfer->is_iso = (desc_edpt->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS); + if (dir == TUSB_DIR_OUT) { + USBHSD->ENDP_CONFIG |= (USBHS_EP0_R_EN << ep_num); + EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + if (xfer->is_iso == true) { + USBHSD->ENDP_TYPE |= (USBHS_EP0_R_TYP << ep_num); + } + EP_RX_MAX_LEN(ep_num) = xfer->max_size; + } else { + if (xfer->is_iso == true) { + USBHSD->ENDP_TYPE |= (USBHS_EP0_T_TYP << ep_num); } else { - if (xfer->is_iso == true) { - USBHSD->ENDP_TYPE |= (USBHS_EP0_T_TYP << ep_num); - } else { - /* Enable all types except Isochronous to avoid ISO_ACT interrupt generation */ - USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); - } - EP_TX_LEN(ep_num) = 0; - EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + /* Enable all types except Isochronous to avoid ISO_ACT interrupt generation */ + USBHSD->ENDP_CONFIG |= (USBHS_EP0_T_EN << ep_num); } + EP_TX_LEN(ep_num) = 0; + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + } - return true; + return true; } void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void)rhport; - - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - EP_RX_MAX_LEN(ep_num) = 0; - USBHSD->ENDP_TYPE &= ~(USBHS_EP0_R_TYP << ep_num); - USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_R_EN << ep_num); - } else { // TUSB_DIR_IN - EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; - EP_TX_LEN(ep_num) = 0; - USBHSD->ENDP_TYPE &= ~(USBHS_EP0_T_TYP << ep_num); - USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); - } + (void) rhport; + + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); + + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + EP_RX_MAX_LEN(ep_num) = 0; + USBHSD->ENDP_TYPE &= ~(USBHS_EP0_R_TYP << ep_num); + USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_R_EN << ep_num); + } else { // TUSB_DIR_IN + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + EP_TX_LEN(ep_num) = 0; + USBHSD->ENDP_TYPE &= ~(USBHS_EP0_T_TYP << ep_num); + USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); + } } void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { - (void)rhport; + (void) rhport; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(ep_num) = USBHS_EP_R_RES_STALL; - } else { - EP_TX_LEN(0) = 0; - EP_TX_CTRL(ep_num) = USBHS_EP_T_RES_STALL; - } + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep_num) = USBHS_EP_R_RES_STALL; + } else { + EP_TX_LEN(0) = 0; + EP_TX_CTRL(ep_num) = USBHS_EP_T_RES_STALL; + } } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { - (void)rhport; + (void) rhport; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_OUT) { - EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; - } else { - EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_R_RES_NAK; - } + if (dir == TUSB_DIR_OUT) { + EP_RX_CTRL(ep_num) = USBHS_EP_R_AUTOTOG | USBHS_EP_R_RES_NAK; + } else { + EP_TX_CTRL(ep_num) = USBHS_EP_T_AUTOTOG | USBHS_EP_R_RES_NAK; + } } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { - (void)rhport; - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { + (void) rhport; + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, dir); - xfer->buffer = buffer; - xfer->total_len = total_bytes; - xfer->queued_len = 0; - xfer->is_last_packet = false; + xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, dir); + xfer->buffer = buffer; + xfer->total_len = total_bytes; + xfer->queued_len = 0; + xfer->is_last_packet = false; - xfer_data_packet(ep_addr, xfer); + xfer_data_packet(ep_addr, xfer); - return true; + return true; } void dcd_int_handler(uint8_t rhport) { - (void)rhport; - - uint8_t int_flag = USBHSD->INT_FG; - uint8_t int_status = USBHSD->INT_ST; - - if (int_flag & USBHS_ISO_ACT_FLAG) { - uint8_t ep_num = int_status & MASK_UIS_ENDP; - uint8_t rx_token = int_status & MASK_UIS_TOKEN; - uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; - xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); - - if (rx_token == USBHS_TOKEN_PID_OUT) { - uint16_t rx_len = USBHSD->RX_LEN; - - xfer->queued_len += rx_len; - if (rx_len < xfer->max_size) { - xfer->is_last_packet = true; - } - } else if (rx_token == USBHS_TOKEN_PID_IN) { - if (xfer->is_last_packet == true) { - /* Disable EP to avoid ISO_ACT interrupt generation */ - USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); - } - } + (void) rhport; + + uint8_t int_flag = USBHSD->INT_FG; + uint8_t int_status = USBHSD->INT_ST; + + if (int_flag & USBHS_ISO_ACT_FLAG) { + uint8_t ep_num = int_status & MASK_UIS_ENDP; + uint8_t rx_token = int_status & MASK_UIS_TOKEN; + uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; + xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); + + if (rx_token == USBHS_TOKEN_PID_OUT) { + uint16_t rx_len = USBHSD->RX_LEN; + + xfer->queued_len += rx_len; + if (rx_len < xfer->max_size) { + xfer->is_last_packet = true; + } + } else if (rx_token == USBHS_TOKEN_PID_IN) { + if (xfer->is_last_packet == true) { + /* Disable EP to avoid ISO_ACT interrupt generation */ + USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); + } + } - if (xfer->is_last_packet == true) { - ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); - dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); - } else { - /* prepare next part of packet to xref */ - xfer_data_packet(ep_addr, xfer); + if (xfer->is_last_packet == true) { + ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); + dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); + } else { + /* prepare next part of packet to xref */ + xfer_data_packet(ep_addr, xfer); + } + + USBHSD->INT_FG = USBHS_ISO_ACT_FLAG; /* Clear flag */ + } else if (int_flag & USBHS_TRANSFER_FLAG) { + + uint8_t ep_num = int_status & MASK_UIS_ENDP; + uint8_t rx_token = int_status & MASK_UIS_TOKEN; + uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; + xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); + + if (xfer->is_iso == false) { + if (rx_token == USBHS_TOKEN_PID_OUT) { + uint16_t rx_len = USBHSD->RX_LEN; + + if (ep_num == 0) { + memcpy(&xfer->buffer[xfer->queued_len], ep0_buffer, rx_len); } - USBHSD->INT_FG = USBHS_ISO_ACT_FLAG; /* Clear flag */ - } else if (int_flag & USBHS_TRANSFER_FLAG) { - - uint8_t ep_num = int_status & MASK_UIS_ENDP; - uint8_t rx_token = int_status & MASK_UIS_TOKEN; - uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; - xfer_ctl_t *xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); - - if (xfer->is_iso == false) { - if (rx_token == USBHS_TOKEN_PID_OUT) { - uint16_t rx_len = USBHSD->RX_LEN; - - if (ep_num == 0) { - memcpy(&xfer->buffer[xfer->queued_len], ep0_data_in_out_buffer, rx_len); - } - - xfer->queued_len += rx_len; - if (rx_len < xfer->max_size) { - xfer->is_last_packet = true; - } - - } else if (rx_token == USBHS_TOKEN_PID_IN) { - // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet - // Common processing below - } - - if (xfer->is_last_packet == true) { - ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); - dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); - } else { - /* prepare next part of packet to xref */ - xfer_data_packet(ep_addr, xfer); - } + xfer->queued_len += rx_len; + if (rx_len < xfer->max_size) { + xfer->is_last_packet = true; } - USBHSD->INT_FG = USBHS_TRANSFER_FLAG; /* Clear flag */ - } else if (int_flag & USBHS_SETUP_FLAG) { - ep_set_response_and_toggle(0x80, EP_RESPONSE_NAK); - ep_set_response_and_toggle(0x00, EP_RESPONSE_NAK); - dcd_event_setup_received(0, ep0_data_in_out_buffer, true); + } else if (rx_token == USBHS_TOKEN_PID_IN) { + // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet + // Common processing below + } + + if (xfer->is_last_packet == true) { + ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); + dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); + } else { + /* prepare next part of packet to xref */ + xfer_data_packet(ep_addr, xfer); + } + } - USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ - } else if (int_flag & USBHS_DETECT_FLAG) { + USBHSD->INT_FG = USBHS_TRANSFER_FLAG; /* Clear flag */ + } else if (int_flag & USBHS_SETUP_FLAG) { + ep_set_response_and_toggle(0x80, EP_RESPONSE_NAK); + ep_set_response_and_toggle(0x00, EP_RESPONSE_NAK); + dcd_event_setup_received(0, ep0_buffer, true); - dcd_event_bus_reset(0, TUSB_SPEED_HIGH, true); + USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ + } else if (int_flag & USBHS_DETECT_FLAG) { - USBHSD->DEV_AD = 0; - EP_RX_CTRL(0) = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; - EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; + dcd_event_bus_reset(0, TUSB_SPEED_HIGH, true); - USBHSD->INT_FG = USBHS_DETECT_FLAG; /* Clear flag */ - } else if (int_flag & USBHS_SUSPEND_FLAG) { - dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SUSPEND }; - dcd_event_handler(&event, true); + USBHSD->DEV_AD = 0; + EP_RX_CTRL(0) = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; + EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; - USBHSD->INT_FG = USBHS_SUSPEND_FLAG; /* Clear flag */ - } + USBHSD->INT_FG = USBHS_DETECT_FLAG; /* Clear flag */ + } else if (int_flag & USBHS_SUSPEND_FLAG) { + dcd_event_t event = {.rhport = rhport, .event_id = DCD_EVENT_SUSPEND}; + dcd_event_handler(&event, true); + + USBHSD->INT_FG = USBHS_SUSPEND_FLAG; /* Clear flag */ + } } #endif -- cgit v1.3.1 From 953e3bd6344812c910f714952b4dda47ffe53107 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 21 May 2024 16:08:27 +0700 Subject: - minor update to ep_set_response_and_toggle/xfer_data_packet - merge USBHS_ISO_ACT_FLAG, USBHS_TRANSFER_FLAG handler since they are similar - improve uart output - add note for link speed in bus reset --- hw/bsp/ch32v307/debug_uart.c | 2 +- hw/bsp/ch32v307/family.c | 7 +-- src/portable/wch/ch32_usbhs_reg.h | 5 +- src/portable/wch/dcd_ch32_usbhs.c | 104 +++++++++++++++++--------------------- 4 files changed, 54 insertions(+), 64 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/ch32v307/debug_uart.c b/hw/bsp/ch32v307/debug_uart.c index db3551ca7..fbabeeadc 100644 --- a/hw/bsp/ch32v307/debug_uart.c +++ b/hw/bsp/ch32v307/debug_uart.c @@ -28,7 +28,7 @@ #include -#define UART_RINGBUFFER_SIZE_TX 64 +#define UART_RINGBUFFER_SIZE_TX 128 #define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1) static char tx_buf[UART_RINGBUFFER_SIZE_TX]; diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index fe37ea8e3..94578b416 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -72,7 +72,7 @@ void board_init(void) { SysTick_Config(SystemCoreClock / 1000); #endif - usart_printf_init(115200); + usart_printf_init(CFG_BOARD_UART_BAUDRATE); #if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED // Use Highspeed USB @@ -150,10 +150,11 @@ int board_uart_read(uint8_t* buf, int len) { int board_uart_write(void const* buf, int len) { int txsize = len; + const char* bufc = (const char*) buf; while (txsize--) { - uart_write(*(uint8_t const*) buf); - buf++; + uart_write(*bufc++); } + uart_sync(); return len; } diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index 7428285a5..1c2ed9893 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -74,7 +74,10 @@ // USB SPEED TYPE #define USBHS_SPEED_TYPE_OFFSET 0x08 -#define USBSPEED_MASK (0x03) +#define USBHS_SPEED_TYPE_MASK 0x03 +#define USBHS_SPEED_TYPE_FULL 0 +#define USBHS_SPEED_TYPE_HIGH 1 +#define USBHS_SPEED_TYPE_LOW 2 // USB_MIS_ST #define USBHS_MIS_ST_OFFSET 0x09 diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index dbcf19a7b..8879db98d 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -64,9 +64,8 @@ static xfer_ctl_t xfer_status[EP_MAX][2]; /* Endpoint Buffer */ TU_ATTR_ALIGNED(4) static uint8_t ep0_buffer[CFG_TUD_ENDPOINT0_SIZE]; -static void ep_set_response_and_toggle(uint8_t ep_addr, ep_response_list_t response_type) { - uint8_t const ep_num = tu_edpt_number(ep_addr); - if (ep_addr & TUSB_DIR_IN_MASK) { +static void ep_set_response_and_toggle(uint8_t ep_num, tusb_dir_t ep_dir, ep_response_list_t response_type) { + if (ep_dir == TUSB_DIR_IN) { uint8_t response = (response_type == EP_RESPONSE_ACK) ? USBHS_EP_T_RES_ACK : USBHS_EP_T_RES_NAK; if (ep_num == 0) { if (response_type == EP_RESPONSE_ACK) { @@ -97,11 +96,8 @@ static void ep_set_response_and_toggle(uint8_t ep_addr, ep_response_list_t respo } } -static void xfer_data_packet(uint8_t ep_addr, xfer_ctl_t* xfer) { - uint8_t const ep_num = tu_edpt_number(ep_addr); - tusb_dir_t const dir = tu_edpt_dir(ep_addr); - - if (dir == TUSB_DIR_IN) { +static void xfer_data_packet(uint8_t ep_num, tusb_dir_t ep_dir, xfer_ctl_t* xfer) { + if (ep_dir == TUSB_DIR_IN) { uint16_t remaining = xfer->total_len - xfer->queued_len; uint16_t next_tx_size = TU_MIN(remaining, xfer->max_size); @@ -133,7 +129,7 @@ static void xfer_data_packet(uint8_t ep_addr, xfer_ctl_t* xfer) { EP_RX_MAX_LEN(ep_num) = max_possible_rx_size; } } - ep_set_response_and_toggle(ep_addr, USBHS_EP_R_RES_ACK); + ep_set_response_and_toggle(ep_num, ep_dir, USBHS_EP_R_RES_ACK); } void dcd_init(uint8_t rhport) { @@ -154,7 +150,7 @@ void dcd_init(uint8_t rhport) { #endif USBHSD->INT_EN = 0; - USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_DETECT_EN | USBHS_SUSPEND_EN | USBHS_ISO_ACT_EN; + USBHSD->INT_EN = USBHS_SETUP_ACT_EN | USBHS_TRANSFER_EN | USBHS_BUS_RST_EN | USBHS_SUSPEND_EN | USBHS_ISO_ACT_EN; USBHSD->ENDP_CONFIG = USBHS_EP0_T_EN | USBHS_EP0_R_EN; USBHSD->ENDP_TYPE = 0x00; @@ -328,7 +324,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to xfer->queued_len = 0; xfer->is_last_packet = false; - xfer_data_packet(ep_addr, xfer); + xfer_data_packet(ep_num, dir, xfer); return true; } @@ -339,77 +335,67 @@ void dcd_int_handler(uint8_t rhport) { uint8_t int_flag = USBHSD->INT_FG; uint8_t int_status = USBHSD->INT_ST; - if (int_flag & USBHS_ISO_ACT_FLAG) { - uint8_t ep_num = int_status & MASK_UIS_ENDP; - uint8_t rx_token = int_status & MASK_UIS_TOKEN; - uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; - xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); + if (int_flag & (USBHS_ISO_ACT_FLAG | USBHS_TRANSFER_FLAG)) { + uint8_t const rx_token = int_status & MASK_UIS_TOKEN; + uint8_t const ep_num = int_status & MASK_UIS_ENDP; + tusb_dir_t const ep_dir = (rx_token == USBHS_TOKEN_PID_IN) ? TUSB_DIR_IN : TUSB_DIR_OUT; + uint8_t const ep_addr = tu_edpt_addr(ep_num, ep_dir); + xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, ep_dir); if (rx_token == USBHS_TOKEN_PID_OUT) { uint16_t rx_len = USBHSD->RX_LEN; + if (ep_num == 0) { + memcpy(&xfer->buffer[xfer->queued_len], ep0_buffer, rx_len); + } + xfer->queued_len += rx_len; if (rx_len < xfer->max_size) { xfer->is_last_packet = true; } } else if (rx_token == USBHS_TOKEN_PID_IN) { - if (xfer->is_last_packet == true) { + if (xfer->is_iso && xfer->is_last_packet) { /* Disable EP to avoid ISO_ACT interrupt generation */ USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); + }else { + // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet } } if (xfer->is_last_packet == true) { - ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); + ep_set_response_and_toggle(ep_num, ep_dir, EP_RESPONSE_NAK); dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); } else { /* prepare next part of packet to xref */ - xfer_data_packet(ep_addr, xfer); - } - - USBHSD->INT_FG = USBHS_ISO_ACT_FLAG; /* Clear flag */ - } else if (int_flag & USBHS_TRANSFER_FLAG) { - - uint8_t ep_num = int_status & MASK_UIS_ENDP; - uint8_t rx_token = int_status & MASK_UIS_TOKEN; - uint8_t ep_addr = (rx_token == USBHS_TOKEN_PID_IN) ? (TUSB_DIR_IN_MASK | ep_num) : ep_num; - xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, tu_edpt_dir(ep_addr)); - - if (xfer->is_iso == false) { - if (rx_token == USBHS_TOKEN_PID_OUT) { - uint16_t rx_len = USBHSD->RX_LEN; - - if (ep_num == 0) { - memcpy(&xfer->buffer[xfer->queued_len], ep0_buffer, rx_len); - } - - xfer->queued_len += rx_len; - if (rx_len < xfer->max_size) { - xfer->is_last_packet = true; - } - - } else if (rx_token == USBHS_TOKEN_PID_IN) { - // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet - // Common processing below - } - - if (xfer->is_last_packet == true) { - ep_set_response_and_toggle(ep_addr, EP_RESPONSE_NAK); - dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); - } else { - /* prepare next part of packet to xref */ - xfer_data_packet(ep_addr, xfer); - } + xfer_data_packet(ep_num, ep_dir, xfer); } - USBHSD->INT_FG = USBHS_TRANSFER_FLAG; /* Clear flag */ + USBHSD->INT_FG = (int_flag & (USBHS_ISO_ACT_FLAG | USBHS_TRANSFER_FLAG)); /* Clear flag */ } else if (int_flag & USBHS_SETUP_FLAG) { - ep_set_response_and_toggle(0x80, EP_RESPONSE_NAK); - ep_set_response_and_toggle(0x00, EP_RESPONSE_NAK); + ep_set_response_and_toggle(0, TUSB_DIR_IN, EP_RESPONSE_NAK); + ep_set_response_and_toggle(0, TUSB_DIR_OUT, EP_RESPONSE_NAK); dcd_event_setup_received(0, ep0_buffer, true); USBHSD->INT_FG = USBHS_SETUP_FLAG; /* Clear flag */ - } else if (int_flag & USBHS_DETECT_FLAG) { + } else if (int_flag & USBHS_BUS_RST_FLAG) { + // TODO CH32 does not detect actual speed at this time (should be known at end of reset) + // This interrupt probably triggered at start of bus reset +// tusb_speed_t actual_speed; +// switch(USBHSD->SPEED_TYPE & USBHS_SPEED_TYPE_MASK){ +// case USBHS_SPEED_TYPE_HIGH: +// actual_speed = TUSB_SPEED_HIGH; +// break; +// case USBHS_SPEED_TYPE_FULL: +// actual_speed = TUSB_SPEED_FULL; +// break; +// case USBHS_SPEED_TYPE_LOW: +// actual_speed = TUSB_SPEED_LOW; +// break; +// default: +// TU_ASSERT(0,); +// break; +// } +// dcd_event_bus_reset(0, actual_speed, true); dcd_event_bus_reset(0, TUSB_SPEED_HIGH, true); @@ -417,7 +403,7 @@ void dcd_int_handler(uint8_t rhport) { EP_RX_CTRL(0) = USBHS_EP_R_RES_ACK | USBHS_EP_R_TOG_0; EP_TX_CTRL(0) = USBHS_EP_T_RES_NAK | USBHS_EP_T_TOG_0; - USBHSD->INT_FG = USBHS_DETECT_FLAG; /* Clear flag */ + USBHSD->INT_FG = USBHS_BUS_RST_FLAG; /* Clear flag */ } else if (int_flag & USBHS_SUSPEND_FLAG) { dcd_event_t event = {.rhport = rhport, .event_id = DCD_EVENT_SUSPEND}; dcd_event_handler(&event, true); -- cgit v1.3.1 From 4a5b190a2209958b875416641b67a4076f14c9e2 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 21 May 2024 18:34:25 +0700 Subject: re-add sof event --- src/portable/wch/ch32_usbhs_reg.h | 5 ++++ src/portable/wch/dcd_ch32_usbhs.c | 62 +++++++++++++++++++++------------------ 2 files changed, 39 insertions(+), 28 deletions(-) (limited to 'src/portable') diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index 1c2ed9893..130e4f223 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -63,8 +63,13 @@ // USB DEV AD #define USBHS_DEV_AD_OFFSET 0x03 + // USB FRAME_NO #define USBHS_FRAME_NO_OFFSET 0x04 +#define USBHS_FRAME_NO_NUM_MASK (0x7FF) +#define USBHS_FRAME_NO_MICROFRAME_SHIFT (11) +#define USBHS_FRAME_NO_MICROFRAME_MASK (0x7 << USBHS_FRAME_NO_MICROFRAME_SHIFT) + // USB SUSPEND #define USBHS_SUSPEND_OFFSET 0x06 #define USBHS_DEV_REMOTE_WAKEUP (1 << 2) diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 8879db98d..b36c7dd50 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -336,40 +336,46 @@ void dcd_int_handler(uint8_t rhport) { uint8_t int_status = USBHSD->INT_ST; if (int_flag & (USBHS_ISO_ACT_FLAG | USBHS_TRANSFER_FLAG)) { - uint8_t const rx_token = int_status & MASK_UIS_TOKEN; - uint8_t const ep_num = int_status & MASK_UIS_ENDP; - tusb_dir_t const ep_dir = (rx_token == USBHS_TOKEN_PID_IN) ? TUSB_DIR_IN : TUSB_DIR_OUT; - uint8_t const ep_addr = tu_edpt_addr(ep_num, ep_dir); - xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, ep_dir); - - if (rx_token == USBHS_TOKEN_PID_OUT) { - uint16_t rx_len = USBHSD->RX_LEN; + uint8_t const token = int_status & MASK_UIS_TOKEN; + + if (token == USBHS_TOKEN_PID_SOF) { + uint32_t frame_count = USBHSD->FRAME_NO & USBHS_FRAME_NO_NUM_MASK; + dcd_event_sof(rhport, frame_count, true); + }else { + uint8_t const ep_num = int_status & MASK_UIS_ENDP; + tusb_dir_t const ep_dir = (token == USBHS_TOKEN_PID_IN) ? TUSB_DIR_IN : TUSB_DIR_OUT; + uint8_t const ep_addr = tu_edpt_addr(ep_num, ep_dir); + xfer_ctl_t* xfer = XFER_CTL_BASE(ep_num, ep_dir); + + if (token == USBHS_TOKEN_PID_OUT) { + uint16_t rx_len = USBHSD->RX_LEN; + + if (ep_num == 0) { + memcpy(&xfer->buffer[xfer->queued_len], ep0_buffer, rx_len); + } - if (ep_num == 0) { - memcpy(&xfer->buffer[xfer->queued_len], ep0_buffer, rx_len); + xfer->queued_len += rx_len; + if (rx_len < xfer->max_size) { + xfer->is_last_packet = true; + } + } else if (token == USBHS_TOKEN_PID_IN) { + if (xfer->is_iso && xfer->is_last_packet) { + /* Disable EP to avoid ISO_ACT interrupt generation */ + USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); + } else { + // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet + } } - xfer->queued_len += rx_len; - if (rx_len < xfer->max_size) { - xfer->is_last_packet = true; - } - } else if (rx_token == USBHS_TOKEN_PID_IN) { - if (xfer->is_iso && xfer->is_last_packet) { - /* Disable EP to avoid ISO_ACT interrupt generation */ - USBHSD->ENDP_CONFIG &= ~(USBHS_EP0_T_EN << ep_num); - }else { - // Do nothing, no need to update xfer->is_last_packet, it is already updated in xfer_data_packet + if (xfer->is_last_packet == true) { + ep_set_response_and_toggle(ep_num, ep_dir, EP_RESPONSE_NAK); + dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); + } else { + /* prepare next part of packet to xref */ + xfer_data_packet(ep_num, ep_dir, xfer); } } - if (xfer->is_last_packet == true) { - ep_set_response_and_toggle(ep_num, ep_dir, EP_RESPONSE_NAK); - dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); - } else { - /* prepare next part of packet to xref */ - xfer_data_packet(ep_num, ep_dir, xfer); - } - USBHSD->INT_FG = (int_flag & (USBHS_ISO_ACT_FLAG | USBHS_TRANSFER_FLAG)); /* Clear flag */ } else if (int_flag & USBHS_SETUP_FLAG) { ep_set_response_and_toggle(0, TUSB_DIR_IN, EP_RESPONSE_NAK); -- cgit v1.3.1 From 927015baae9b2d265d1daaa0fc2ffca1aa4f9e91 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 May 2024 11:38:44 +0700 Subject: wch usbfs/usbhs need to specify which driver to use. for v307 default to highspeed --- hw/bsp/ch32v307/family.c | 13 +++++---- hw/bsp/ch32v307/family.cmake | 15 +++++++--- hw/bsp/ch32v307/family.mk | 4 +-- src/common/tusb_mcu.h | 50 ++++++++++++++++++++++++++-------- src/device/usbd.c | 2 +- src/portable/synopsys/dwc2/dwc2_type.h | 33 ++++++++++++++++------ src/portable/wch/dcd_ch32_usbfs.c | 3 +- src/portable/wch/dcd_ch32_usbhs.c | 3 +- src/tusb_option.h | 47 ++++++++++++++++++-------------- 9 files changed, 114 insertions(+), 56 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 94578b416..0846b10a9 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -38,13 +38,13 @@ // TODO maybe having FS as port0, HS as port1 __attribute__((interrupt)) void USBHS_IRQHandler(void) { - #if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED + #if CFG_TUD_WCH_USBIP_USBHS tud_int_handler(0); #endif } __attribute__((interrupt)) void OTG_FS_IRQHandler(void) { - #if CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED + #if CFG_TUD_WCH_USBIP_USBFS tud_int_handler(0); #endif } @@ -74,15 +74,17 @@ void board_init(void) { usart_printf_init(CFG_BOARD_UART_BAUDRATE); -#if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED - // Use Highspeed USB +#ifdef CH32V30x_D8C + // v305/v307: Highspeed USB RCC_USBCLK48MConfig(RCC_USBCLK48MCLKSource_USBPHY); RCC_USBHSPLLCLKConfig(RCC_HSBHSPLLCLKSource_HSE); RCC_USBHSConfig(RCC_USBPLL_Div2); RCC_USBHSPLLCKREFCLKConfig(RCC_USBHSPLLCKREFCLK_4M); RCC_USBHSPHYPLLALIVEcmd(ENABLE); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_USBHS, ENABLE); -#else +#endif + + // Fullspeed USB uint8_t otg_div; switch (SystemCoreClock) { case 48000000: otg_div = RCC_OTGFSCLKSource_PLLCLK_Div1; break; @@ -92,7 +94,6 @@ void board_init(void) { } RCC_OTGFSCLKConfig(otg_div); RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); -#endif GPIO_InitTypeDef GPIO_InitStructure = {0}; diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index fd475c987..af26bfc31 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -14,7 +14,7 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") -# default to highspeed +# default to highspeed, used to select USBFS / USBHS driver if (NOT DEFINED SPEED) set(SPEED high) endif() @@ -52,9 +52,16 @@ function(add_board_target BOARD_TARGET) ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=$,OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> - ) + if (SPEED STREQUAL high) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_USBHS=1 +# BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + else () + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_USBFS=1 + ) + endif () update_board(${BOARD_TARGET}) diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 2dbe0c46a..30a070a9b 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -26,11 +26,11 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ ifeq ($(SPEED),high) - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED $(info "Using USBHS driver for HighSpeed mode") + CFLAGS += -DCFG_TUD_WCH_USBIP_USBHS=1 else - CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED $(info "Using USBFS driver for FullSpeed mode") + CFLAGS += -DCFG_TUD_WCH_USBIP_USBFS=1 endif LDFLAGS_GCC += \ diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index abfed2835..af11ecb9b 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -402,28 +402,56 @@ #elif TU_CHECK_MCU(OPT_MCU_F1C100S) #define TUP_DCD_ENDPOINT_MAX 4 -//------------- WCH -------------// -#elif TU_CHECK_MCU(OPT_MCU_CH32V307) - // v307 support both FS and HS +//--------------------------------------------------------------------+ +// WCH +//--------------------------------------------------------------------+ +#elif TU_CHECK_MCU(OPT_MCU_CH32F20X) #define TUP_USBIP_WCH_USBHS #define TUP_USBIP_WCH_USBFS - #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif -#elif TU_CHECK_MCU(OPT_MCU_CH32F20X) - #define TUP_USBIP_WCH_USBHS - #define TUP_USBIP_WCH_USBFS + #if !defined(CFG_TUD_WCH_USBIP_USBHS) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif - #define TUP_RHPORT_HIGHSPEED 1 // default to highspeed - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED ? 16 : 8) + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) + // v20x support both FSDEV (USBD) and USBFS, default to FSDEV #define TUP_USBIP_WCH_USBFS #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_CH32 -#endif + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif + #if !defined(CFG_TUD_WCH_FSDEV) + #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif + +#elif TU_CHECK_MCU(OPT_MCU_CH32V307) + // v307 support both FS and HS, default to HS + #define TUP_USBIP_WCH_USBHS + #define TUP_USBIP_WCH_USBFS + + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 0 + #endif + + #if !defined(CFG_TUD_WCH_USBIP_USBHS) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #endif + + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + +#endif //--------------------------------------------------------------------+ // External USB controller diff --git a/src/device/usbd.c b/src/device/usbd.c index 25d890dc7..9a6afd0d1 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -407,7 +407,7 @@ bool tud_init(uint8_t rhport) { // skip if already initialized if (tud_inited()) return true; - TU_LOG_USBD("USBD init on controller %u\r\n", rhport); + TU_LOG_USBD("USBD init on controller %u, Highspeed = %u\r\n", rhport, TUD_OPT_HIGH_SPEED); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(dcd_event_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t)); diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index c15771237..cb694b326 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -1,17 +1,34 @@ -/** - * @author MCD Application Team - * Ha Thach (tinyusb.org) - * - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ +/**

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause - * */ #ifndef _TUSB_DWC2_TYPES_H_ diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index dafe4414e..9ed370b40 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -27,8 +27,7 @@ #include "tusb_option.h" -// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is full speed -#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && (CFG_TUD_MAX_SPEED == OPT_MODE_FULL_SPEED) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBFS) && CFG_TUD_WCH_USBIP_USBFS #include "device/dcd.h" #include "ch32_usbfs_reg.h" diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index b36c7dd50..622f9c508 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -27,8 +27,7 @@ #include "tusb_option.h" -// Note: CH32 can have both USB FS and HS, only use this driver if CFG_TUD_MAX_SPEED is high speed -#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && (CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && CFG_TUD_WCH_USBIP_USBHS #include "ch32_usbhs_reg.h" #include "device/dcd.h" diff --git a/src/tusb_option.h b/src/tusb_option.h index 318a4c7bd..d74510b60 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -207,19 +207,9 @@ #define OPT_OS_RTTHREAD 6 ///< RT-Thread #define OPT_OS_RTX4 7 ///< Keil RTX 4 -// Allow to use command line to change the config name/location -#ifdef CFG_TUSB_CONFIG_FILE - #include CFG_TUSB_CONFIG_FILE -#else - #include "tusb_config.h" -#endif - -#include "common/tusb_mcu.h" - -//-------------------------------------------------------------------- -// RootHub Mode Configuration -// CFG_TUSB_RHPORTx_MODE contains operation mode and speed for that port -//-------------------------------------------------------------------- +//--------------------------------------------------------------------+ +// Mode and Speed +//--------------------------------------------------------------------+ // Low byte is operational mode #define OPT_MODE_NONE 0x0000 ///< Disabled @@ -233,7 +223,24 @@ #define OPT_MODE_HIGH_SPEED 0x0400 ///< High Speed #define OPT_MODE_SPEED_MASK 0xff00 -//------------- Roothub as Device -------------// +//--------------------------------------------------------------------+ +// Include tusb_config.h and tusb_mcu.h +//--------------------------------------------------------------------+ + +// Allow to use command line to change the config name/location +#ifdef CFG_TUSB_CONFIG_FILE + #include CFG_TUSB_CONFIG_FILE +#else + #include "tusb_config.h" +#endif + +#include "common/tusb_mcu.h" + +//-------------------------------------------------------------------- +// RootHub Mode detection +//-------------------------------------------------------------------- + +//------------- Root hub as Device -------------// #if defined(CFG_TUSB_RHPORT0_MODE) && ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE) #define TUD_RHPORT_MODE (CFG_TUSB_RHPORT0_MODE) @@ -261,7 +268,7 @@ // highspeed support indicator #define TUD_OPT_HIGH_SPEED (CFG_TUD_MAX_SPEED ? (CFG_TUD_MAX_SPEED & OPT_MODE_HIGH_SPEED) : TUP_RHPORT_HIGHSPEED) -//------------- Roothub as Host -------------// +//------------- Root hub as Host -------------// #if defined(CFG_TUSB_RHPORT0_MODE) && ((CFG_TUSB_RHPORT0_MODE) & OPT_MODE_HOST) #define TUH_RHPORT_MODE (CFG_TUSB_RHPORT0_MODE) @@ -467,26 +474,26 @@ #define CFG_TUH_CDC 0 #endif +// FTDI is not part of CDC class, only to re-use CDC driver API #ifndef CFG_TUH_CDC_FTDI - // FTDI is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_FTDI 0 #endif +// List of product IDs that can use the FTDI CDC driver. 0x0403 is FTDI's VID #ifndef CFG_TUH_CDC_FTDI_VID_PID_LIST - // List of product IDs that can use the FTDI CDC driver. 0x0403 is FTDI's VID #define CFG_TUH_CDC_FTDI_VID_PID_LIST \ {0x0403, 0x6001}, {0x0403, 0x6006}, {0x0403, 0x6010}, {0x0403, 0x6011}, \ {0x0403, 0x6014}, {0x0403, 0x6015}, {0x0403, 0x8372}, {0x0403, 0xFBFA}, \ {0x0403, 0xCD18} #endif +// CP210X is not part of CDC class, only to re-use CDC driver API #ifndef CFG_TUH_CDC_CP210X - // CP210X is not part of CDC class, only to re-use CDC driver API #define CFG_TUH_CDC_CP210X 0 #endif +// List of product IDs that can use the CP210X CDC driver. 0x10C4 is Silicon Labs' VID #ifndef CFG_TUH_CDC_CP210X_VID_PID_LIST - // List of product IDs that can use the CP210X CDC driver. 0x10C4 is Silicon Labs' VID #define CFG_TUH_CDC_CP210X_VID_PID_LIST \ {0x10C4, 0xEA60}, {0x10C4, 0xEA70} #endif @@ -496,8 +503,8 @@ #define CFG_TUH_CDC_CH34X 0 #endif +// List of product IDs that can use the CH34X CDC driver #ifndef CFG_TUH_CDC_CH34X_VID_PID_LIST - // List of product IDs that can use the CH34X CDC driver #define CFG_TUH_CDC_CH34X_VID_PID_LIST \ { 0x1a86, 0x5523 }, /* ch341 chip */ \ { 0x1a86, 0x7522 }, /* ch340k chip */ \ -- cgit v1.3.1 From 4ce439a75a6f7aa995c74e7ac32e70ab8216c771 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 May 2024 13:58:44 +0700 Subject: add ch32 support for fsdev driver. v20x can select fsdev or usbfs with make/cmake PORT=0/1. default to fsdev --- hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h | 1 - hw/bsp/ch32v20x/family.c | 151 +++++-- hw/bsp/ch32v20x/family.cmake | 20 +- hw/bsp/ch32v20x/family.mk | 15 +- hw/bsp/ch32v20x/linker/ch32v20x.ld | 166 +++++++- src/common/tusb_compiler.h | 1 + src/common/tusb_mcu.h | 5 +- src/device/dcd.h | 7 +- src/device/usbd.c | 23 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 214 ++-------- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h | 551 ------------------------- src/portable/st/stm32_fsdev/fsdev_ch32.h | 232 +++++++++++ src/portable/st/stm32_fsdev/fsdev_common.h | 391 ++++++++++++++++++ src/portable/st/stm32_fsdev/fsdev_stm32.h | 292 +++++++++++++ src/tusb_option.h | 9 + 15 files changed, 1281 insertions(+), 797 deletions(-) delete mode 100644 src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h create mode 100644 src/portable/st/stm32_fsdev/fsdev_ch32.h create mode 100644 src/portable/st/stm32_fsdev/fsdev_common.h create mode 100644 src/portable/st/stm32_fsdev/fsdev_stm32.h (limited to 'src/portable') diff --git a/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h b/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h index c8d28d90f..3ed2aef04 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h +++ b/hw/bsp/ch32v20x/boards/ch32v203_r0_1v0/board.h @@ -8,7 +8,6 @@ extern "C" { #define LED_PORT GPIOA #define LED_PIN GPIO_Pin_15 #define LED_STATE_ON 0 -#define LED_CLOCK_EN() RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE) #ifdef __cplusplus } diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index 247dacde6..a0a8c3f50 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -1,82 +1,153 @@ #include #include "ch32v20x.h" + #include "bsp/board_api.h" #include "board.h" -__attribute__((interrupt)) +/* CH32v203 depending on variants can support 2 USB IPs: FSDEV and USBFS. + * By default, we use FSDEV, but you can explicitly select by define: + * - CFG_TUD_WCH_USBIP_FSDEV + * - CFG_TUD_WCH_USBIP_USBFS + */ + +// USBFS +__attribute__((interrupt)) __attribute__((used)) void USBHD_IRQHandler(void) { - tud_int_handler(0); + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +__attribute__((interrupt)) __attribute__((used)) +void USBHDWakeUp_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +// USBD (fsdev) +__attribute__((interrupt)) __attribute__((used)) +void USB_LP_CAN1_RX0_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_FSDEV + tud_int_handler(0); + #endif } +__attribute__((interrupt)) __attribute__((used)) +void USB_HP_CAN1_TX_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_FSDEV + tud_int_handler(0); + #endif + +} + +__attribute__((interrupt)) __attribute__((used)) +void USBWakeUp_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_FSDEV + tud_int_handler(0); + #endif +} + + #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; __attribute__((interrupt)) void SysTick_Handler(void) { - SysTick->SR = 0; - system_ticks++; + SysTick->SR = 0; + system_ticks++; } uint32_t SysTick_Config(uint32_t ticks) { - NVIC_EnableIRQ(SysTicK_IRQn); - SysTick->CTLR = 0; - SysTick->SR = 0; - SysTick->CNT = 0; - SysTick->CMP = ticks-1; - SysTick->CTLR = 0xF; - return 0; + NVIC_EnableIRQ(SysTicK_IRQn); + SysTick->CTLR = 0; + SysTick->SR = 0; + SysTick->CNT = 0; + SysTick->CMP = ticks - 1; + SysTick->CTLR = 0xF; + return 0; } uint32_t board_millis(void) { - return system_ticks; + return system_ticks; } #endif void board_init(void) { - __disable_irq(); + __disable_irq(); #if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(SystemCoreClock / 1000); + SysTick_Config(SystemCoreClock / 1000); #endif - switch (SystemCoreClock) { - case 48000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); break; - case 96000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div2); break; - case 144000000: RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div3); break; - default: TU_ASSERT(0,); break; - } - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); - - LED_CLOCK_EN(); - GPIO_InitTypeDef GPIO_InitStructure = { - .GPIO_Pin = LED_PIN, - .GPIO_Mode = GPIO_Mode_Out_OD, - .GPIO_Speed = GPIO_Speed_50MHz, - }; - GPIO_Init(LED_PORT, &GPIO_InitStructure); - - __enable_irq(); - board_delay(2); + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + + uint8_t usb_div; + switch (SystemCoreClock) { + case 48000000: usb_div = RCC_USBCLKSource_PLLCLK_Div1; break; + case 96000000: usb_div = RCC_USBCLKSource_PLLCLK_Div2; break; + case 144000000: usb_div = RCC_USBCLKSource_PLLCLK_Div3; break; + default: TU_ASSERT(0,); break; + } + RCC_USBCLKConfig(usb_div); + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); // FSDEV + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_OTG_FS, ENABLE); // USB FS + + GPIO_InitTypeDef GPIO_InitStructure = { + .GPIO_Pin = LED_PIN, + .GPIO_Mode = GPIO_Mode_Out_OD, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(LED_PORT, &GPIO_InitStructure); + + // UART TX is PA9 + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE); + GPIO_InitTypeDef usart_init = { + .GPIO_Pin = GPIO_Pin_9, + .GPIO_Speed = GPIO_Speed_50MHz, + .GPIO_Mode = GPIO_Mode_AF_PP, + }; + GPIO_Init(GPIOA, &usart_init); + + USART_InitTypeDef usart = { + .USART_BaudRate = 115200, + .USART_WordLength = USART_WordLength_8b, + .USART_StopBits = USART_StopBits_1, + .USART_Parity = USART_Parity_No, + .USART_Mode = USART_Mode_Tx, + .USART_HardwareFlowControl = USART_HardwareFlowControl_None, + }; + USART_Init(USART1, &usart); + USART_Cmd(USART1, ENABLE); + + __enable_irq(); + board_delay(2); + + printf("SystemCoreClock = %ld\r\n", SystemCoreClock); } void board_led_write(bool state) { - GPIO_WriteBit(LED_PORT, LED_PIN, state); + GPIO_WriteBit(LED_PORT, LED_PIN, state); } uint32_t board_button_read(void) { - return false; + return false; } int board_uart_read(uint8_t *buf, int len) { - (void) buf; - (void) len; - return 0; + (void) buf; + (void) len; + return 0; } int board_uart_write(void const *buf, int len) { - (void) buf; - (void) len; - return len; + const char *bufc = (const char *) buf; + for (int i = 0; i < len; i++) { + while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET); + USART_SendData(USART1, *bufc++); + } + + return len; } diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 80b035fc0..3fb1c0e79 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -14,6 +14,11 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TO set(FAMILY_MCUS CH32V20X CACHE INTERNAL "") set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") +# Port0 use FSDev, Port1 use USBFS +if (NOT DEFINED PORT) + set(PORT 0) +endif() + #------------------------------------ # BOARD_TARGET #------------------------------------ @@ -48,9 +53,20 @@ function(add_board_target BOARD_TARGET) ) target_compile_definitions(${BOARD_TARGET} PUBLIC CH32V20x_${MCU_VARIANT} - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) + if (PORT EQUAL 0) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_FSDEV=1 + ) + elseif (PORT EQUAL 1) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUD_WCH_USBIP_USBFS=1 + ) + else() + message(FATAL_ERROR "Invalid PORT ${PORT}") + endif() + update_board(${BOARD_TARGET}) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") @@ -99,8 +115,10 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 5c8b31a1c..49d4d2feb 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -14,13 +14,23 @@ SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= rv32imac-ilp32 +# Port0 use FSDev, Port1 use USBFS +PORT ?= 0 + CFLAGS += \ -mcmodel=medany \ -ffat-lto-objects \ -flto \ -DCH32V20x_${MCU_VARIANT} \ - -DCFG_TUSB_MCU=OPT_MCU_CH32V20X \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED \ + -DCFG_TUSB_MCU=OPT_MCU_CH32V20X + +ifeq ($(PORT),0) + $(info "Using FSDEV driver") + CFLAGS += -DCFG_TUD_WCH_USBIP_FSDEV=1 +else + $(info "Using USBFS driver") + CFLAGS += -DCFG_TUD_WCH_USBIP_USBFS=1 +endif LDFLAGS_GCC += \ -nostdlib -nostartfiles \ @@ -30,6 +40,7 @@ LD_FILE = $(FAMILY_PATH)/linker/${CH32_FAMILY}.ld SRC_C += \ src/portable/wch/dcd_ch32_usbfs.c \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(SDK_SRC_DIR)/Core/core_riscv.c \ $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_gpio.c \ $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_misc.c \ diff --git a/hw/bsp/ch32v20x/linker/ch32v20x.ld b/hw/bsp/ch32v20x/linker/ch32v20x.ld index 6ee2fa1c7..cd5c8dc17 100644 --- a/hw/bsp/ch32v20x/linker/ch32v20x.ld +++ b/hw/bsp/ch32v20x/linker/ch32v20x.ld @@ -1 +1,165 @@ -/* Define default values if not already defined */ __FLASH_SIZE = DEFINED(__flash_size) ? __flash_size : 64K; __RAM_SIZE = DEFINED(__ram_size) ? __ram_size : 20K; MEMORY { FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __FLASH_SIZE RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __RAM_SIZE } ENTRY( _start ) __stack_size = 2048; PROVIDE( _stack_size = __stack_size ); SECTIONS { .init : { _sinit = .; . = ALIGN(4); KEEP(*(SORT_NONE(.init))) . = ALIGN(4); _einit = .; } >FLASH AT>FLASH .vector : { *(.vector); . = ALIGN(64); } >FLASH AT>FLASH .text : { . = ALIGN(4); *(.text) *(.text.*) *(.rodata) *(.rodata*) *(.gnu.linkonce.t.*) . = ALIGN(4); } >FLASH AT>FLASH .fini : { KEEP(*(SORT_NONE(.fini))) . = ALIGN(4); } >FLASH AT>FLASH PROVIDE( _etext = . ); PROVIDE( _eitcm = . ); .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); } >FLASH AT>FLASH .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) PROVIDE_HIDDEN (__init_array_end = .); } >FLASH AT>FLASH .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) PROVIDE_HIDDEN (__fini_array_end = .); } >FLASH AT>FLASH .ctors : { /* gcc uses crtbegin.o to find the start of the constructors, so we make sure it is first. Because this is a wildcard, it doesn't matter if the user does not actually link against crtbegin.o; the linker won't look for a file to match a wildcard. The wildcard also means that it doesn't matter which directory crtbegin.o is in. */ KEEP (*crtbegin.o(.ctors)) KEEP (*crtbegin?.o(.ctors)) /* We don't want to include the .ctor section from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) } >FLASH AT>FLASH .dtors : { KEEP (*crtbegin.o(.dtors)) KEEP (*crtbegin?.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) } >FLASH AT>FLASH .dalign : { . = ALIGN(4); PROVIDE(_data_vma = .); } >RAM AT>FLASH .dlalign : { . = ALIGN(4); PROVIDE(_data_lma = .); } >FLASH AT>FLASH .data : { *(.gnu.linkonce.r.*) *(.data .data.*) *(.gnu.linkonce.d.*) . = ALIGN(8); PROVIDE( __global_pointer$ = . + 0x800 ); *(.sdata .sdata.*) *(.sdata2.*) *(.gnu.linkonce.s.*) . = ALIGN(8); *(.srodata.cst16) *(.srodata.cst8) *(.srodata.cst4) *(.srodata.cst2) *(.srodata .srodata.*) . = ALIGN(4); PROVIDE( _edata = .); } >RAM AT>FLASH .bss : { . = ALIGN(4); PROVIDE( _sbss = .); *(.sbss*) *(.gnu.linkonce.sb.*) *(.bss*) *(.gnu.linkonce.b.*) *(COMMON*) . = ALIGN(4); PROVIDE( _ebss = .); } >RAM AT>FLASH PROVIDE( _end = _ebss); PROVIDE( end = . ); .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : { PROVIDE( _heap_end = . ); . = ALIGN(4); PROVIDE(_susrstack = . ); . = . + __stack_size; PROVIDE( _eusrstack = .); } >RAM } +/* Define default values if not already defined */ +__FLASH_SIZE = DEFINED(__flash_size) ? __flash_size : 64K; +__RAM_SIZE = DEFINED(__ram_size) ? __ram_size : 20K; + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __FLASH_SIZE + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __RAM_SIZE +} + +ENTRY( _start ) + +__stack_size = 2048; + +PROVIDE( _stack_size = __stack_size ); + +SECTIONS +{ + .init : + { + _sinit = .; + . = ALIGN(4); + KEEP(*(SORT_NONE(.init))) + . = ALIGN(4); + _einit = .; + } >FLASH AT>FLASH + + .vector : + { + *(.vector); + . = ALIGN(64); + } >FLASH AT>FLASH + + .text : + { + . = ALIGN(4); + *(.text) + *(.text.*) + *(.rodata) + *(.rodata*) + *(.gnu.linkonce.t.*) + . = ALIGN(4); + } >FLASH AT>FLASH + + .fini : + { + KEEP(*(SORT_NONE(.fini))) + . = ALIGN(4); + } >FLASH AT>FLASH + + PROVIDE( _etext = . ); + PROVIDE( _eitcm = . ); + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH AT>FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) + KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH AT>FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) + KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH AT>FLASH + + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } >FLASH AT>FLASH + + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } >FLASH AT>FLASH + + .dalign : + { + . = ALIGN(4); + PROVIDE(_data_vma = .); + } >RAM AT>FLASH + + .dlalign : + { + . = ALIGN(4); + PROVIDE(_data_lma = .); + } >FLASH AT>FLASH + + .data : + { + *(.gnu.linkonce.r.*) + *(.data .data.*) + *(.gnu.linkonce.d.*) + . = ALIGN(8); + PROVIDE( __global_pointer$ = . + 0x800 ); + *(.sdata .sdata.*) + *(.sdata2.*) + *(.gnu.linkonce.s.*) + . = ALIGN(8); + *(.srodata.cst16) + *(.srodata.cst8) + *(.srodata.cst4) + *(.srodata.cst2) + *(.srodata .srodata.*) + . = ALIGN(4); + PROVIDE( _edata = .); + } >RAM AT>FLASH + + .bss : + { + . = ALIGN(4); + PROVIDE( _sbss = .); + *(.sbss*) + *(.gnu.linkonce.sb.*) + *(.bss*) + *(.gnu.linkonce.b.*) + *(COMMON*) + . = ALIGN(4); + PROVIDE( _ebss = .); + } >RAM AT>FLASH + + PROVIDE( _end = _ebss); + PROVIDE( end = . ); + + .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : + { + PROVIDE( _heap_end = . ); + . = ALIGN(4); + PROVIDE(_susrstack = . ); + . = . + __stack_size; + PROVIDE( _eusrstack = .); + } >RAM + +} diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 0d5570b1c..ce5566ffe 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -128,6 +128,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f)) #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #endif diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index af11ecb9b..c66996c4f 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -423,7 +423,6 @@ #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) // v20x support both FSDEV (USBD) and USBFS, default to FSDEV #define TUP_USBIP_WCH_USBFS - #define TUP_DCD_ENDPOINT_MAX 8 #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_CH32 @@ -431,10 +430,12 @@ #define CFG_TUD_WCH_USBIP_USBFS 0 #endif - #if !defined(CFG_TUD_WCH_FSDEV) + #if !defined(CFG_TUD_WCH_USBIP_FSDEV) #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif + #define TUP_DCD_ENDPOINT_MAX 8 + #elif TU_CHECK_MCU(OPT_MCU_CH32V307) // v307 support both FS and HS, default to HS #define TUP_USBIP_WCH_USBHS diff --git a/src/device/dcd.h b/src/device/dcd.h index 9447d6d9d..2d3dafa4c 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -39,9 +39,6 @@ // Configuration //--------------------------------------------------------------------+ -#ifndef CFG_TUD_ENDPPOINT_MAX - #define CFG_TUD_ENDPPOINT_MAX TUP_DCD_ENDPOINT_MAX -#endif //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES @@ -149,10 +146,10 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr); void dcd_remote_wakeup(uint8_t rhport); // Connect by enabling internal pull-up resistor on D+/D- -void dcd_connect(uint8_t rhport) TU_ATTR_WEAK; +void dcd_connect(uint8_t rhport); // Disconnect by disabling internal pull-up resistor on D+/D- -void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK; +void dcd_disconnect(uint8_t rhport); // Enable/Disable Start-of-frame interrupt. Default is disabled void dcd_sof_enable(uint8_t rhport, bool en); diff --git a/src/device/usbd.c b/src/device/usbd.c index 9a6afd0d1..88183fad0 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -45,11 +45,6 @@ //--------------------------------------------------------------------+ // Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ -TU_ATTR_WEAK bool dcd_deinit(uint8_t rhport) { - (void) rhport; - return false; -} - TU_ATTR_WEAK void tud_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) { (void)rhport; (void)eventid; @@ -60,6 +55,19 @@ TU_ATTR_WEAK void tud_sof_cb(uint32_t frame_count) { (void)frame_count; } +TU_ATTR_WEAK bool dcd_deinit(uint8_t rhport) { + (void) rhport; + return false; +} + +TU_ATTR_WEAK void dcd_connect(uint8_t rhport) { + (void) rhport; +} + +TU_ATTR_WEAK void dcd_disconnect(uint8_t rhport) { + (void) rhport; +} + //--------------------------------------------------------------------+ // Device Data //--------------------------------------------------------------------+ @@ -379,19 +387,16 @@ bool tud_remote_wakeup(void) { } bool tud_disconnect(void) { - TU_VERIFY(dcd_disconnect); dcd_disconnect(_usbd_rhport); return true; } bool tud_connect(void) { - TU_VERIFY(dcd_connect); dcd_connect(_usbd_rhport); return true; } -bool tud_sof_cb_enable(bool en) -{ +bool tud_sof_cb_enable(bool en) { usbd_sof_enable(_usbd_rhport, SOF_CONSUMER_USER, en); return true; } diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index a26c66892..9ce37f992 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -102,25 +102,29 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && defined(TUP_USBIP_FSDEV) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_FSDEV) && \ + !(defined(TUP_USBIP_FSDEV_CH32) && CFG_TUD_WCH_USBIP_FSDEV == 0) #include "device/dcd.h" -#ifdef TUP_USBIP_FSDEV_STM32 -// Undefine to reduce the dependence on HAL -#undef USE_HAL_DRIVER -#include "portable/st/stm32_fsdev/dcd_stm32_fsdev.h" +#if defined(TUP_USBIP_FSDEV_STM32) + // Undefine to reduce the dependence on HAL + #undef USE_HAL_DRIVER + #include "fsdev_stm32.h" +#elif defined(TUP_USBIP_FSDEV_CH32) + #include "fsdev_ch32.h" +#else + #error "Unknown USB IP" #endif -/***************************************************** - * Configuration - *****************************************************/ +#include "fsdev_common.h" -// HW supports max of 8 bidirectional endpoints, but this can be reduced to save RAM -// (8u here would mean 8 IN and 8 OUT) -#ifndef MAX_EP_COUNT -#define MAX_EP_COUNT 8U -#endif +//--------------------------------------------------------------------+ +// Configuration +//--------------------------------------------------------------------+ + +// hardware limit endpoint +#define FSDEV_EP_COUNT 8 // If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it // Both of these MUST be a multiple of 2, and are in byte units. @@ -132,11 +136,6 @@ #define DCD_STM32_BTABLE_SIZE (FSDEV_PMA_SIZE - DCD_STM32_BTABLE_BASE) #endif -/*************************************************** - * Checks, structs, defines, function definitions, etc. - */ - -TU_VERIFY_STATIC((MAX_EP_COUNT) <= STFSDEV_EP_COUNT, "Only 8 endpoints supported on the hardware"); TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) + (DCD_STM32_BTABLE_SIZE)) <= (FSDEV_PMA_SIZE), "BTABLE does not fit in PMA RAM"); TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) % 8) == 0, "BTABLE base must be aligned to 8 bytes"); @@ -162,9 +161,9 @@ typedef struct { bool allocated[2]; } ep_alloc_t; -static xfer_ctl_t xfer_status[MAX_EP_COUNT][2]; +static xfer_ctl_t xfer_status[CFG_TUD_ENDPPOINT_MAX][2]; -static ep_alloc_t ep_alloc_status[STFSDEV_EP_COUNT]; +static ep_alloc_t ep_alloc_status[FSDEV_EP_COUNT]; static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[6]; @@ -199,7 +198,7 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint32_t ep_addr) uint8_t epnum = tu_edpt_number(ep_addr); uint8_t dir = tu_edpt_dir(ep_addr); // Fix -Werror=null-dereference - TU_ASSERT(epnum < MAX_EP_COUNT, &xfer_status[0][0]); + TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX, &xfer_status[0][0]); return &xfer_status[epnum][dir]; } @@ -239,7 +238,7 @@ void dcd_init(uint8_t rhport) USB->ISTR = 0; // Clear pending interrupts // Reset endpoints to disabled - for (uint32_t i = 0; i < STFSDEV_EP_COUNT; i++) { + for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // This doesn't clear all bits since some bits are "toggle", but does set the type to DISABLED. pcd_set_endpoint(USB, i, 0u); } @@ -248,43 +247,9 @@ void dcd_init(uint8_t rhport) dcd_handle_bus_reset(); // Enable pull-up if supported - if (dcd_connect) { - dcd_connect(rhport); - } -} - -// Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. -#if defined(USB_BCDR_DPPU) - -// Disable internal D+ PU -void dcd_disconnect(uint8_t rhport) -{ - (void)rhport; - USB->BCDR &= ~(USB_BCDR_DPPU); -} - -// Enable internal D+ PU -void dcd_connect(uint8_t rhport) -{ - (void)rhport; - USB->BCDR |= USB_BCDR_DPPU; -} - -#elif defined(SYSCFG_PMC_USB_PU) // works e.g. on STM32L151 -// Disable internal D+ PU -void dcd_disconnect(uint8_t rhport) -{ - (void)rhport; - SYSCFG->PMC &= ~(SYSCFG_PMC_USB_PU); + dcd_connect(rhport); } -// Enable internal D+ PU -void dcd_connect(uint8_t rhport) -{ - (void)rhport; - SYSCFG->PMC |= SYSCFG_PMC_USB_PU; -} -#endif void dcd_sof_enable(uint8_t rhport, bool en) { @@ -298,126 +263,6 @@ void dcd_sof_enable(uint8_t rhport, bool en) } } -// Enable device interrupt -void dcd_int_enable(uint8_t rhport) -{ - (void)rhport; - // Member here forces write to RAM before allowing ISR to execute - __DSB(); - __ISB(); -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || CFG_TUSB_MCU == OPT_MCU_STM32L4 - NVIC_EnableIRQ(USB_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 - NVIC_EnableIRQ(USB_LP_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F3 -// Some STM32F302/F303 devices allow to remap the USB interrupt vectors from -// shared USB/CAN IRQs to separate CAN and USB IRQs. -// This dynamically checks if this remap is active to enable the right IRQs. -#ifdef SYSCFG_CFGR1_USB_IT_RMP - if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { - NVIC_EnableIRQ(USB_HP_IRQn); - NVIC_EnableIRQ(USB_LP_IRQn); - NVIC_EnableIRQ(USBWakeUp_RMP_IRQn); - } else -#endif - { - NVIC_EnableIRQ(USB_HP_CAN_TX_IRQn); - NVIC_EnableIRQ(USB_LP_CAN_RX0_IRQn); - NVIC_EnableIRQ(USBWakeUp_IRQn); - } -#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 - NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn); - NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn); - NVIC_EnableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 - NVIC_EnableIRQ(USB_HP_IRQn); - NVIC_EnableIRQ(USB_LP_IRQn); - NVIC_EnableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 -#ifdef STM32G0B0xx - NVIC_EnableIRQ(USB_IRQn); -#else - NVIC_EnableIRQ(USB_UCPD1_2_IRQn); -#endif - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - NVIC_EnableIRQ(USB_DRD_FS_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32WB - NVIC_EnableIRQ(USB_HP_IRQn); - NVIC_EnableIRQ(USB_LP_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 - NVIC_EnableIRQ(USB_FS_IRQn); - -#else -#error Unknown arch in USB driver -#endif -} - -// Disable device interrupt -void dcd_int_disable(uint8_t rhport) -{ - (void)rhport; - -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 || CFG_TUSB_MCU == OPT_MCU_STM32L0 || CFG_TUSB_MCU == OPT_MCU_STM32L4 - NVIC_DisableIRQ(USB_IRQn); -#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 - NVIC_DisableIRQ(USB_LP_IRQn); -#elif CFG_TUSB_MCU == OPT_MCU_STM32F3 -// Some STM32F302/F303 devices allow to remap the USB interrupt vectors from -// shared USB/CAN IRQs to separate CAN and USB IRQs. -// This dynamically checks if this remap is active to disable the right IRQs. -#ifdef SYSCFG_CFGR1_USB_IT_RMP - if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { - NVIC_DisableIRQ(USB_HP_IRQn); - NVIC_DisableIRQ(USB_LP_IRQn); - NVIC_DisableIRQ(USBWakeUp_RMP_IRQn); - } else -#endif - { - NVIC_DisableIRQ(USB_HP_CAN_TX_IRQn); - NVIC_DisableIRQ(USB_LP_CAN_RX0_IRQn); - NVIC_DisableIRQ(USBWakeUp_IRQn); - } -#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 - NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn); - NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); - NVIC_DisableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 - NVIC_DisableIRQ(USB_HP_IRQn); - NVIC_DisableIRQ(USB_LP_IRQn); - NVIC_DisableIRQ(USBWakeUp_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 -#ifdef STM32G0B0xx - NVIC_DisableIRQ(USB_IRQn); -#else - NVIC_DisableIRQ(USB_UCPD1_2_IRQn); -#endif - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - NVIC_DisableIRQ(USB_DRD_FS_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32WB - NVIC_DisableIRQ(USB_HP_IRQn); - NVIC_DisableIRQ(USB_LP_IRQn); - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 - NVIC_DisableIRQ(USB_FS_IRQn); - -#else -#error Unknown arch in USB driver -#endif - - // CMSIS has a membar after disabling interrupts -} - // Receive Set Address request, mcu port must also include status IN response void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { @@ -461,7 +306,7 @@ static void dcd_handle_bus_reset(void) { USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag - for (uint32_t i = 0; i < STFSDEV_EP_COUNT; i++) { + for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // Clear EP allocation status ep_alloc_status[i].ep_num = 0xFF; ep_alloc_status[i].ep_type = 0xFF; @@ -470,7 +315,7 @@ static void dcd_handle_bus_reset(void) } // Reset PMA allocation - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * MAX_EP_COUNT; + ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX; dcd_edpt_open(0, &ep0OUT_desc); dcd_edpt_open(0, &ep0IN_desc); @@ -653,7 +498,6 @@ static void dcd_ep_ctr_handler(void) void dcd_int_handler(uint8_t rhport) { - (void)rhport; uint32_t int_status = USB->ISTR; @@ -774,7 +618,7 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - for (uint8_t i = 0; i < STFSDEV_EP_COUNT; i++) { + for (uint8_t i = 0; i < FSDEV_EP_COUNT; i++) { // Check if already allocated if (ep_alloc_status[i].allocated[dir] && ep_alloc_status[i].ep_type == ep_type && @@ -818,7 +662,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) uint16_t pma_addr; uint32_t wType; - TU_ASSERT(ep_idx < STFSDEV_EP_COUNT); + TU_ASSERT(ep_idx < FSDEV_EP_COUNT); TU_ASSERT(buffer_size <= 64); // Set type @@ -865,7 +709,7 @@ void dcd_edpt_close_all(uint8_t rhport) { (void)rhport; - for (uint32_t i = 1; i < STFSDEV_EP_COUNT; i++) { + for (uint32_t i = 1; i < FSDEV_EP_COUNT; i++) { // Reset endpoint pcd_set_endpoint(USB, i, 0); // Clear EP allocation status @@ -876,7 +720,7 @@ void dcd_edpt_close_all(uint8_t rhport) } // Reset PMA allocation - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * MAX_EP_COUNT + 2 * CFG_TUD_ENDPOINT0_SIZE; + ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX + 2 * CFG_TUD_ENDPOINT0_SIZE; } /** @@ -1155,7 +999,7 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui } if (wNBytes) { - temp1 = *srcVal; + temp1 = (uint16_t) *srcVal; *pdwVal = temp1; } diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h deleted file mode 100644 index 7992f34a1..000000000 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.h +++ /dev/null @@ -1,551 +0,0 @@ -/* - * Copyright(c) 2016 STMicroelectronics - * Copyright(c) N Conrad - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * This file is part of the TinyUSB stack. - */ - -// This file contains source copied from ST's HAL, and thus should have their copyright statement. - -// FSDEV_PMA_SIZE is PMA buffer size in bytes. -// On 512-byte devices, access with a stride of two words (use every other 16-bit address) -// On 1024-byte devices, access with a stride of one word (use every 16-bit address) - -#ifndef PORTABLE_ST_STM32F0_DCD_STM32F0_FSDEV_PVT_ST_H_ -#define PORTABLE_ST_STM32F0_DCD_STM32F0_FSDEV_PVT_ST_H_ - -#if CFG_TUSB_MCU == OPT_MCU_STM32F0 - #include "stm32f0xx.h" - #define FSDEV_PMA_SIZE (1024u) - // F0x2 models are crystal-less - // All have internal D+ pull-up - // 070RB: 2 x 16 bits/word memory LPM Support, BCD Support - // PMA dedicated to USB (no sharing with CAN) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 - #include "stm32f1xx.h" - #define FSDEV_PMA_SIZE (512u) - // NO internal Pull-ups - // *B, and *C: 2 x 16 bits/word - - // F1 names this differently from the rest - #define USB_CNTR_LPMODE USB_CNTR_LP_MODE - -#elif defined(STM32F302xB) || defined(STM32F302xC) || \ - defined(STM32F303xB) || defined(STM32F303xC) || \ - defined(STM32F373xC) - #include "stm32f3xx.h" - #define FSDEV_PMA_SIZE (512u) - // NO internal Pull-ups - // *B, and *C: 1 x 16 bits/word - // PMA dedicated to USB (no sharing with CAN) - -#elif defined(STM32F302x6) || defined(STM32F302x8) || \ - defined(STM32F302xD) || defined(STM32F302xE) || \ - defined(STM32F303xD) || defined(STM32F303xE) - #include "stm32f3xx.h" - #define FSDEV_PMA_SIZE (1024u) - // NO internal Pull-ups - // *6, *8, *D, and *E: 2 x 16 bits/word LPM Support - // When CAN clock is enabled, USB can use first 768 bytes ONLY. - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L0 - #include "stm32l0xx.h" - #define FSDEV_PMA_SIZE (1024u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 - #include "stm32l1xx.h" - #define FSDEV_PMA_SIZE (512u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 - #include "stm32g4xx.h" - #define FSDEV_PMA_SIZE (1024u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 - #include "stm32g0xx.h" - #define FSDEV_BUS_32BIT - #define FSDEV_PMA_SIZE (2048u) - #undef USB_PMAADDR - #define USB_PMAADDR USB_DRD_PMAADDR - #define USB_TypeDef USB_DRD_TypeDef - #define EP0R CHEP0R - #define USB_EP_CTR_RX USB_EP_VTRX - #define USB_EP_CTR_TX USB_EP_VTTX - #define USB_EP_T_FIELD USB_CHEP_UTYPE - #define USB_EPREG_MASK USB_CHEP_REG_MASK - #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK - #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK - #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 - #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 - #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 - #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 - #define USB_EPRX_STAT USB_CH_RX_VALID - #define USB_EPKIND_MASK USB_EP_KIND_MASK - #define USB USB_DRD_FS - #define USB_CNTR_FRES USB_CNTR_USBRST - #define USB_CNTR_RESUME USB_CNTR_L2RES - #define USB_ISTR_EP_ID USB_ISTR_IDN - #define USB_EPADDR_FIELD USB_CHEP_ADDR - #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN - -#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 - #include "stm32h5xx.h" - #define FSDEV_BUS_32BIT - - #if !defined(USB_DRD_BASE) && defined(USB_DRD_FS_BASE) - #define USB_DRD_BASE USB_DRD_FS_BASE - #endif - - #define FSDEV_PMA_SIZE (2048u) - #undef USB_PMAADDR - #define USB_PMAADDR USB_DRD_PMAADDR - #define USB_TypeDef USB_DRD_TypeDef - #define EP0R CHEP0R - #define USB_EP_CTR_RX USB_EP_VTRX - #define USB_EP_CTR_TX USB_EP_VTTX - #define USB_EP_T_FIELD USB_CHEP_UTYPE - #define USB_EPREG_MASK USB_CHEP_REG_MASK - #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK - #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK - #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 - #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 - #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 - #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 - #define USB_EPRX_STAT USB_CH_RX_VALID - #define USB_EPKIND_MASK USB_EP_KIND_MASK - #define USB USB_DRD_FS - #define USB_CNTR_FRES USB_CNTR_USBRST - #define USB_CNTR_RESUME USB_CNTR_L2RES - #define USB_ISTR_EP_ID USB_ISTR_IDN - #define USB_EPADDR_FIELD USB_CHEP_ADDR - #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY - #define USB_CNTR_FSUSP USB_CNTR_SUSPEN - -#elif CFG_TUSB_MCU == OPT_MCU_STM32WB - #include "stm32wbxx.h" - #define FSDEV_PMA_SIZE (1024u) - /* ST provided header has incorrect value */ - #undef USB_PMAADDR - #define USB_PMAADDR USB1_PMAADDR - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 - #include "stm32l4xx.h" - #define FSDEV_PMA_SIZE (1024u) - -#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 - #include "stm32l5xx.h" - #define FSDEV_PMA_SIZE (1024u) - - #ifndef USB_PMAADDR - #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) - #endif - -#else - #error You are using an untested or unimplemented STM32 variant. Please update the driver. - // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4 -#endif - -// For purposes of accessing the packet -#if ((FSDEV_PMA_SIZE) == 512u) - #define FSDEV_PMA_STRIDE (2u) -#elif ((FSDEV_PMA_SIZE) == 1024u) - #define FSDEV_PMA_STRIDE (1u) -#endif - -// The fsdev_bus_t type can be used for both register and PMA access necessities -// For type-safety create a new macro for the volatile address of PMAADDR -// The compiler should warn us if we cast it to a non-volatile type? -#ifdef FSDEV_BUS_32BIT -typedef uint32_t fsdev_bus_t; -static __IO uint32_t * const pma32 = (__IO uint32_t*)USB_PMAADDR; - -#else -typedef uint16_t fsdev_bus_t; -// Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) -static __IO uint16_t * const pma = (__IO uint16_t*)USB_PMAADDR; - -TU_ATTR_ALWAYS_INLINE static inline __IO uint16_t * pcd_btable_word_ptr(USB_TypeDef * USBx, size_t x) { - size_t total_word_offset = (((USBx)->BTABLE)>>1) + x; - total_word_offset *= FSDEV_PMA_STRIDE; - return &(pma[total_word_offset]); -} - -TU_ATTR_ALWAYS_INLINE static inline __IO uint16_t* pcd_ep_tx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { - return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 1u); -} - -TU_ATTR_ALWAYS_INLINE static inline __IO uint16_t* pcd_ep_rx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { - return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 3u); -} -#endif - -/* Aligned buffer size according to hardware */ -TU_ATTR_ALWAYS_INLINE static inline uint16_t pcd_aligned_buffer_size(uint16_t size) { - /* The STM32 full speed USB peripheral supports only a limited set of - * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ - uint16_t blocksize = (size > 62) ? 32 : 2; - - // Round up while dividing requested size by blocksize - uint16_t numblocks = (size + blocksize - 1) / blocksize ; - - return numblocks * blocksize; -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wRegValue) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - __O uint32_t *reg = (__O uint32_t *)(USB_DRD_BASE + bEpIdx*4); - *reg = wRegValue; -#else - __O uint16_t *reg = (__O uint16_t *)((&USBx->EP0R) + bEpIdx*2u); - *reg = (uint16_t)wRegValue; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - __I uint32_t *reg = (__I uint32_t *)(USB_DRD_BASE + bEpIdx*4); -#else - __I uint16_t *reg = (__I uint16_t *)((&USBx->EP0R) + bEpIdx*2u); -#endif - return *reg; -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= (uint32_t)USB_EP_T_MASK; - regVal |= wType; - regVal |= USB_EP_CTR_RX | USB_EP_CTR_TX; // These clear on write0, so must set high - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_eptype(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EP_T_FIELD; - return regVal; -} - -/** - * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal &= ~USB_EP_CTR_RX; - regVal |= USB_EP_CTR_TX; // preserve CTR_TX (clears on writing 0) - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal &= ~USB_EP_CTR_TX; - regVal |= USB_EP_CTR_RX; // preserve CTR_RX (clears on writing 0) - pcd_set_endpoint(USBx, bEpIdx,regVal); -} - -/** - * @brief gets counter of the tx buffer. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval Counter value - */ -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return (pma32[2*bEpIdx] & 0x03FF0000) >> 16; -#else - __I uint16_t *regPtr = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); - return *regPtr & 0x3ffU; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return (pma32[2*bEpIdx + 1] & 0x03FF0000) >> 16; -#else - __I uint16_t *regPtr = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); - return *regPtr & 0x3ffU; -#endif -} - -#define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt -#define pcd_get_ep_dbuf1_cnt pcd_get_ep_rx_cnt - -/** - * @brief Sets address in an endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param bAddr Address. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t bAddr) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= bAddr; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx,regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return pma32[2*bEpIdx] & 0x0000FFFFu ; -#else - return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u); -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - return pma32[2*bEpIdx + 1] & 0x0000FFFFu; -#else - return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u); -#endif -} - -#define pcd_get_ep_dbuf0_address pcd_get_ep_tx_address -#define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx] = (pma32[2*bEpIdx] & 0xFFFF0000u) | (addr & 0x0000FFFCu); -#else - *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u) = addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & 0xFFFF0000u) | (addr & 0x0000FFFCu); -#else - *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u) = addr; -#endif -} - -#define pcd_set_ep_dbuf0_address pcd_set_ep_tx_address -#define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx] = (pma32[2*bEpIdx] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); -#else - __IO uint16_t * reg = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); - *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); -#endif -} - -#define pcd_set_ep_tx_dbuf0_cnt pcd_set_ep_tx_cnt - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_dbuf1_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); -#else - __IO uint16_t * reg = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); - *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_blsize_num_blocks(USB_TypeDef * USBx, uint32_t rxtx_idx, - uint32_t blocksize, uint32_t numblocks) { - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[rxtx_idx] = (pma32[rxtx_idx] & 0x0000FFFFu) | (blocksize << 31) | ((numblocks - blocksize) << 26); -#else - __IO uint16_t *pdwReg = pcd_btable_word_ptr(USBx, rxtx_idx*2u + 1u); - *pdwReg = (blocksize << 15) | ((numblocks - blocksize) << 10); -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_bufsize(USB_TypeDef * USBx, uint32_t rxtx_idx, uint32_t wCount) { - wCount = pcd_aligned_buffer_size(wCount); - - /* We assume that the buffer size is already aligned to hardware requirements. */ - uint16_t blocksize = (wCount > 62) ? 1 : 0; - uint16_t numblocks = wCount / (blocksize ? 32 : 2); - - /* There should be no remainder in the above calculation */ - TU_ASSERT((wCount - (numblocks * (blocksize ? 32 : 2))) == 0, /**/); - - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ - pcd_set_ep_blsize_num_blocks(USBx, rxtx_idx, blocksize, numblocks); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_dbuf0_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { - pcd_set_ep_bufsize(USBx, 2*bEpIdx, wCount); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { - pcd_set_ep_bufsize(USBx, 2*bEpIdx + 1, wCount); -} - -#define pcd_set_ep_rx_dbuf1_cnt pcd_set_ep_rx_cnt - -/** - * @brief sets the status for tx transfer (bits STAT_TX[1:0]). - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param wState new state - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPTX_DTOGMASK; - - /* toggle first bit ? */ - if((USB_EPTX_DTOG1 & (wState))!= 0U) - { - regVal ^= USB_EPTX_DTOG1; - } - /* toggle second bit ? */ - if((USB_EPTX_DTOG2 & ((uint32_t)(wState)))!= 0U) - { - regVal ^= USB_EPTX_DTOG2; - } - - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -/** - * @brief sets the status for rx transfer (bits STAT_TX[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param wState new state - * @retval None - */ - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPRX_DTOGMASK; - - /* toggle first bit ? */ - if((USB_EPRX_DTOG1 & wState)!= 0U) { - regVal ^= USB_EPRX_DTOG1; - } - /* toggle second bit ? */ - if((USB_EPRX_DTOG2 & wState)!= 0U) { - regVal ^= USB_EPRX_DTOG2; - } - - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - return (regVal & USB_EPRX_STAT) >> (12u); -} - - -/** - * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -/** - * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - if((regVal & USB_EP_DTOG_RX) != 0) { - pcd_rx_dtog(USBx,bEpIdx); - } -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - if((regVal & USB_EP_DTOG_TX) != 0) { - pcd_tx_dtog(USBx,bEpIdx); - } -} - -/** - * @brief set & clear EP_KIND bit. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal |= USB_EP_KIND; - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPKIND_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -// This checks if the device has "LPM" -#if defined(USB_ISTR_L1REQ) -#define USB_ISTR_L1REQ_FORCED (USB_ISTR_L1REQ) -#else -#define USB_ISTR_L1REQ_FORCED ((uint16_t)0x0000U) -#endif - -#define USB_ISTR_ALL_EVENTS (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_WKUP | USB_ISTR_SUSP | \ - USB_ISTR_RESET | USB_ISTR_SOF | USB_ISTR_ESOF | USB_ISTR_L1REQ_FORCED ) - -// Number of endpoints in hardware -// TODO should use TUP_DCD_ENDPOINT_MAX -#define STFSDEV_EP_COUNT (8u) - -#endif /* PORTABLE_ST_STM32F0_DCD_STM32F0_FSDEV_PVT_ST_H_ */ diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h new file mode 100644 index 000000000..85fe3266c --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -0,0 +1,232 @@ +/* +* The MIT License (MIT) + * + * Copyright (c) 2024, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ +/**

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + */ + +#ifndef TUSB_FSDEV_CH32_H +#define TUSB_FSDEV_CH32_H + +#include "common/tusb_compiler.h" + +#if CFG_TUSB_MCU == OPT_MCU_CH32V20X + #include + +#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X + #include +#endif + +#define FSDEV_PMA_SIZE (512u) + +// volatile 32-bit aligned +#define _va32 volatile TU_ATTR_ALIGNED(4) + +typedef struct { + _va32 uint16_t EP0R; // 00: USB Endpoint 0 register + _va32 uint16_t EP1R; // 04: USB Endpoint 1 register + _va32 uint16_t EP2R; // 08: USB Endpoint 2 register + _va32 uint16_t EP3R; // 0C: USB Endpoint 3 register + _va32 uint16_t EP4R; // 10: USB Endpoint 4 register + _va32 uint16_t EP5R; // 14: USB Endpoint 5 register + _va32 uint16_t EP6R; // 18: USB Endpoint 6 register + _va32 uint16_t EP7R; // 1C: USB Endpoint 7 register + _va32 uint16_t RESERVED7[16]; // Reserved + _va32 uint16_t CNTR; // 40: Control register + _va32 uint16_t ISTR; // 44: Interrupt status register + _va32 uint16_t FNR; // 48: Frame number register + _va32 uint16_t DADDR; // 4C: Device address register + _va32 uint16_t BTABLE; // 50: Buffer Table address register +} USB_TypeDef; + +TU_VERIFY_STATIC(sizeof(USB_TypeDef) == 0x54, "Size is not correct"); +TU_VERIFY_STATIC(offsetof(USB_TypeDef, CNTR) == 0x40, "Wrong offset"); + +#define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ +#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ +#define USB ((USB_TypeDef *)USB_BASE) + +/******************************************************************************/ +/* */ +/* USB Device General registers */ +/* */ +/******************************************************************************/ +#define USB_CNTR (USB_BASE + 0x40U) /*!< Control register */ +#define USB_ISTR (USB_BASE + 0x44U) /*!< Interrupt status register */ +#define USB_FNR (USB_BASE + 0x48U) /*!< Frame number register */ +#define USB_DADDR (USB_BASE + 0x4CU) /*!< Device address register */ +#define USB_BTABLE (USB_BASE + 0x50U) /*!< Buffer Table address register */ + +/**************************** ISTR interrupt events *************************/ +#define USB_ISTR_CTR ((uint16_t)0x8000U) /*!< Correct TRansfer (clear-only bit) */ +#define USB_ISTR_PMAOVR ((uint16_t)0x4000U) /*!< DMA OVeR/underrun (clear-only bit) */ +#define USB_ISTR_ERR ((uint16_t)0x2000U) /*!< ERRor (clear-only bit) */ +#define USB_ISTR_WKUP ((uint16_t)0x1000U) /*!< WaKe UP (clear-only bit) */ +#define USB_ISTR_SUSP ((uint16_t)0x0800U) /*!< SUSPend (clear-only bit) */ +#define USB_ISTR_RESET ((uint16_t)0x0400U) /*!< RESET (clear-only bit) */ +#define USB_ISTR_SOF ((uint16_t)0x0200U) /*!< Start Of Frame (clear-only bit) */ +#define USB_ISTR_ESOF ((uint16_t)0x0100U) /*!< Expected Start Of Frame (clear-only bit) */ +#define USB_ISTR_DIR ((uint16_t)0x0010U) /*!< DIRection of transaction (read-only bit) */ +#define USB_ISTR_EP_ID ((uint16_t)0x000FU) /*!< EndPoint IDentifier (read-only bit) */ + +/* Legacy defines */ +#define USB_ISTR_PMAOVRM USB_ISTR_PMAOVR + +#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */ +#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/ +#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */ +#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */ +#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */ +#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */ +#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */ +#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */ + +/* Legacy defines */ +#define USB_CLR_PMAOVRM USB_CLR_PMAOVR + +/************************* CNTR control register bits definitions ***********/ +#define USB_CNTR_CTRM ((uint16_t)0x8000U) /*!< Correct TRansfer Mask */ +#define USB_CNTR_PMAOVR ((uint16_t)0x4000U) /*!< DMA OVeR/underrun Mask */ +#define USB_CNTR_ERRM ((uint16_t)0x2000U) /*!< ERRor Mask */ +#define USB_CNTR_WKUPM ((uint16_t)0x1000U) /*!< WaKe UP Mask */ +#define USB_CNTR_SUSPM ((uint16_t)0x0800U) /*!< SUSPend Mask */ +#define USB_CNTR_RESETM ((uint16_t)0x0400U) /*!< RESET Mask */ +#define USB_CNTR_SOFM ((uint16_t)0x0200U) /*!< Start Of Frame Mask */ +#define USB_CNTR_ESOFM ((uint16_t)0x0100U) /*!< Expected Start Of Frame Mask */ +#define USB_CNTR_RESUME ((uint16_t)0x0010U) /*!< RESUME request */ +#define USB_CNTR_FSUSP ((uint16_t)0x0008U) /*!< Force SUSPend */ +#define USB_CNTR_LPMODE ((uint16_t)0x0004U) /*!< Low-power MODE */ +#define USB_CNTR_PDWN ((uint16_t)0x0002U) /*!< Power DoWN */ +#define USB_CNTR_FRES ((uint16_t)0x0001U) /*!< Force USB RESet */ + +/* Legacy defines */ +#define USB_CNTR_PMAOVRM USB_CNTR_PMAOVR +#define USB_CNTR_LP_MODE USB_CNTR_LPMODE + +/******************** FNR Frame Number Register bit definitions ************/ +#define USB_FNR_RXDP ((uint16_t)0x8000U) /*!< status of D+ data line */ +#define USB_FNR_RXDM ((uint16_t)0x4000U) /*!< status of D- data line */ +#define USB_FNR_LCK ((uint16_t)0x2000U) /*!< LoCKed */ +#define USB_FNR_LSOF ((uint16_t)0x1800U) /*!< Lost SOF */ +#define USB_FNR_FN ((uint16_t)0x07FFU) /*!< Frame Number */ + +/******************** DADDR Device ADDRess bit definitions ****************/ +#define USB_DADDR_EF ((uint8_t)0x80U) /*!< USB device address Enable Function */ +#define USB_DADDR_ADD ((uint8_t)0x7FU) /*!< USB device address */ + +/****************************** Endpoint register *************************/ +#define USB_EP0R USB_BASE /*!< endpoint 0 register address */ +#define USB_EP1R (USB_BASE + 0x04U) /*!< endpoint 1 register address */ +#define USB_EP2R (USB_BASE + 0x08U) /*!< endpoint 2 register address */ +#define USB_EP3R (USB_BASE + 0x0CU) /*!< endpoint 3 register address */ +#define USB_EP4R (USB_BASE + 0x10U) /*!< endpoint 4 register address */ +#define USB_EP5R (USB_BASE + 0x14U) /*!< endpoint 5 register address */ +#define USB_EP6R (USB_BASE + 0x18U) /*!< endpoint 6 register address */ +#define USB_EP7R (USB_BASE + 0x1CU) /*!< endpoint 7 register address */ +/* bit positions */ +#define USB_EP_CTR_RX ((uint16_t)0x8000U) /*!< EndPoint Correct TRansfer RX */ +#define USB_EP_DTOG_RX ((uint16_t)0x4000U) /*!< EndPoint Data TOGGLE RX */ +#define USB_EPRX_STAT ((uint16_t)0x3000U) /*!< EndPoint RX STATus bit field */ +#define USB_EP_SETUP ((uint16_t)0x0800U) /*!< EndPoint SETUP */ +#define USB_EP_T_FIELD ((uint16_t)0x0600U) /*!< EndPoint TYPE */ +#define USB_EP_KIND ((uint16_t)0x0100U) /*!< EndPoint KIND */ +#define USB_EP_CTR_TX ((uint16_t)0x0080U) /*!< EndPoint Correct TRansfer TX */ +#define USB_EP_DTOG_TX ((uint16_t)0x0040U) /*!< EndPoint Data TOGGLE TX */ +#define USB_EPTX_STAT ((uint16_t)0x0030U) /*!< EndPoint TX STATus bit field */ +#define USB_EPADDR_FIELD ((uint16_t)0x000FU) /*!< EndPoint ADDRess FIELD */ + +/* EndPoint REGister MASK (no toggle fields) */ +#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD) + /*!< EP_TYPE[1:0] EndPoint TYPE */ +#define USB_EP_TYPE_MASK ((uint16_t)0x0600U) /*!< EndPoint TYPE Mask */ +#define USB_EP_BULK ((uint16_t)0x0000U) /*!< EndPoint BULK */ +#define USB_EP_CONTROL ((uint16_t)0x0200U) /*!< EndPoint CONTROL */ +#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400U) /*!< EndPoint ISOCHRONOUS */ +#define USB_EP_INTERRUPT ((uint16_t)0x0600U) /*!< EndPoint INTERRUPT */ +#define USB_EP_T_MASK ((uint16_t) ~USB_EP_T_FIELD & USB_EPREG_MASK) + +#define USB_EPKIND_MASK ((uint16_t) ~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */ + /*!< STAT_TX[1:0] STATus for TX transfer */ +#define USB_EP_TX_DIS ((uint16_t)0x0000U) /*!< EndPoint TX DISabled */ +#define USB_EP_TX_STALL ((uint16_t)0x0010U) /*!< EndPoint TX STALLed */ +#define USB_EP_TX_NAK ((uint16_t)0x0020U) /*!< EndPoint TX NAKed */ +#define USB_EP_TX_VALID ((uint16_t)0x0030U) /*!< EndPoint TX VALID */ +#define USB_EPTX_DTOG1 ((uint16_t)0x0010U) /*!< EndPoint TX Data TOGgle bit1 */ +#define USB_EPTX_DTOG2 ((uint16_t)0x0020U) /*!< EndPoint TX Data TOGgle bit2 */ +#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK) + /*!< STAT_RX[1:0] STATus for RX transfer */ +#define USB_EP_RX_DIS ((uint16_t)0x0000U) /*!< EndPoint RX DISabled */ +#define USB_EP_RX_STALL ((uint16_t)0x1000U) /*!< EndPoint RX STALLed */ +#define USB_EP_RX_NAK ((uint16_t)0x2000U) /*!< EndPoint RX NAKed */ +#define USB_EP_RX_VALID ((uint16_t)0x3000U) /*!< EndPoint RX VALID */ +#define USB_EPRX_DTOG1 ((uint16_t)0x1000U) /*!< EndPoint RX Data TOGgle bit1 */ +#define USB_EPRX_DTOG2 ((uint16_t)0x2000U) /*!< EndPoint RX Data TOGgle bit1 */ +#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK) + + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +#if CFG_TUSB_MCU == OPT_MCU_CH32V20X +static const IRQn_Type fsdev_irq[] = { + USB_HP_CAN1_TX_IRQn, + USB_LP_CAN1_RX0_IRQn, + USBWakeUp_IRQn +}; +enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; +#else + #error "Unsupported MCU" +#endif + +void dcd_int_enable(uint8_t rhport) { + (void)rhport; + for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { + NVIC_EnableIRQ(fsdev_irq[i]); + } +} + +void dcd_int_disable(uint8_t rhport) { + (void)rhport; + for(uint8_t i=0; i < FSDEV_IRQ_NUM; i++) { + NVIC_DisableIRQ(fsdev_irq[i]); + } +} + +void dcd_disconnect(uint8_t rhport) { + (void) rhport; + EXTEN->EXTEN_CTR &= ~EXTEN_USBD_PU_EN; +} + +void dcd_connect(uint8_t rhport) { + (void) rhport; + EXTEN->EXTEN_CTR |= EXTEN_USBD_PU_EN; +} + +#endif diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h new file mode 100644 index 000000000..af5d8afab --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -0,0 +1,391 @@ +/* + * The MIT License (MIT) + * + * Copyright(c) 2016 STMicroelectronics + * Copyright(c) N Conrad + * Copyright (c) 2024, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef TUSB_FSDEV_COMMON_H +#define TUSB_FSDEV_COMMON_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stdint.h" + +// FSDEV_PMA_SIZE is PMA buffer size in bytes. +// On 512-byte devices, access with a stride of two words (use every other 16-bit address) +// On 1024-byte devices, access with a stride of one word (use every 16-bit address) + +// For purposes of accessing the packet +#if ((FSDEV_PMA_SIZE) == 512u) + #define FSDEV_PMA_STRIDE (2u) +#elif ((FSDEV_PMA_SIZE) == 1024u) + #define FSDEV_PMA_STRIDE (1u) +#endif + +// The fsdev_bus_t type can be used for both register and PMA access necessities +// For type-safety create a new macro for the volatile address of PMAADDR +// The compiler should warn us if we cast it to a non-volatile type? +#ifdef FSDEV_BUS_32BIT +typedef uint32_t fsdev_bus_t; +static volatile uint32_t * const pma32 = (volatile uint32_t*)USB_PMAADDR; + +#else +typedef uint16_t fsdev_bus_t; +// Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) +static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; + +TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t * pcd_btable_word_ptr(USB_TypeDef * USBx, size_t x) { + size_t total_word_offset = (((USBx)->BTABLE)>>1) + x; + total_word_offset *= FSDEV_PMA_STRIDE; + return &(pma[total_word_offset]); +} + +TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t* pcd_ep_tx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { + return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 1u); +} + +TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t* pcd_ep_rx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { + return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 3u); +} +#endif + +/* Aligned buffer size according to hardware */ +TU_ATTR_ALWAYS_INLINE static inline uint16_t pcd_aligned_buffer_size(uint16_t size) { + /* The STM32 full speed USB peripheral supports only a limited set of + * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ + uint16_t blocksize = (size > 62) ? 32 : 2; + + // Round up while dividing requested size by blocksize + uint16_t numblocks = (size + blocksize - 1) / blocksize ; + + return numblocks * blocksize; +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wRegValue) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + volatile uint32_t *reg = (volatile uint32_t *)(USB_DRD_BASE + bEpIdx*4); + *reg = wRegValue; +#else + volatile uint16_t *reg = (volatile uint16_t *)((&USBx->EP0R) + bEpIdx*2u); + *reg = (uint16_t)wRegValue; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + volatile const uint32_t *reg = (volatile const uint32_t *)(USB_DRD_BASE + bEpIdx*4); +#else + volatile const uint16_t *reg = (volatile const uint16_t *)((&USBx->EP0R) + bEpIdx*2u); +#endif + return *reg; +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= (uint32_t)USB_EP_T_MASK; + regVal |= wType; + regVal |= USB_EP_CTR_RX | USB_EP_CTR_TX; // These clear on write0, so must set high + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_eptype(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EP_T_FIELD; + return regVal; +} + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @retval None + */ +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal &= ~USB_EP_CTR_RX; + regVal |= USB_EP_CTR_TX; // preserve CTR_TX (clears on writing 0) + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal &= ~USB_EP_CTR_TX; + regVal |= USB_EP_CTR_RX; // preserve CTR_RX (clears on writing 0) + pcd_set_endpoint(USBx, bEpIdx,regVal); +} + +/** + * @brief gets counter of the tx buffer. + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @retval Counter value + */ +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return (pma32[2*bEpIdx] & 0x03FF0000) >> 16; +#else + volatile const uint16_t *regPtr = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); + return *regPtr & 0x3ffU; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return (pma32[2*bEpIdx + 1] & 0x03FF0000) >> 16; +#else + volatile const uint16_t *regPtr = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); + return *regPtr & 0x3ffU; +#endif +} + +#define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt +#define pcd_get_ep_dbuf1_cnt pcd_get_ep_rx_cnt + +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @param bAddr Address. + * @retval None + */ +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t bAddr) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal |= bAddr; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx,regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return pma32[2*bEpIdx] & 0x0000FFFFu ; +#else + return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u); +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + return pma32[2*bEpIdx + 1] & 0x0000FFFFu; +#else + return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u); +#endif +} + +#define pcd_get_ep_dbuf0_address pcd_get_ep_tx_address +#define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx] = (pma32[2*bEpIdx] & 0xFFFF0000u) | (addr & 0x0000FFFCu); +#else + *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u) = addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & 0xFFFF0000u) | (addr & 0x0000FFFCu); +#else + *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u) = addr; +#endif +} + +#define pcd_set_ep_dbuf0_address pcd_set_ep_tx_address +#define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx] = (pma32[2*bEpIdx] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); +#else + volatile uint16_t * reg = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); + *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); +#endif +} + +#define pcd_set_ep_tx_dbuf0_cnt pcd_set_ep_tx_cnt + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_dbuf1_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); +#else + volatile uint16_t * reg = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); + *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_blsize_num_blocks(USB_TypeDef * USBx, uint32_t rxtx_idx, + uint32_t blocksize, uint32_t numblocks) { + /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ +#ifdef FSDEV_BUS_32BIT + (void) USBx; + pma32[rxtx_idx] = (pma32[rxtx_idx] & 0x0000FFFFu) | (blocksize << 31) | ((numblocks - blocksize) << 26); +#else + volatile uint16_t *pdwReg = pcd_btable_word_ptr(USBx, rxtx_idx*2u + 1u); + *pdwReg = (blocksize << 15) | ((numblocks - blocksize) << 10); +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_bufsize(USB_TypeDef * USBx, uint32_t rxtx_idx, uint32_t wCount) { + wCount = pcd_aligned_buffer_size(wCount); + + /* We assume that the buffer size is already aligned to hardware requirements. */ + uint16_t blocksize = (wCount > 62) ? 1 : 0; + uint16_t numblocks = wCount / (blocksize ? 32 : 2); + + /* There should be no remainder in the above calculation */ + TU_ASSERT((wCount - (numblocks * (blocksize ? 32 : 2))) == 0, /**/); + + /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ + pcd_set_ep_blsize_num_blocks(USBx, rxtx_idx, blocksize, numblocks); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_dbuf0_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { + pcd_set_ep_bufsize(USBx, 2*bEpIdx, wCount); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { + pcd_set_ep_bufsize(USBx, 2*bEpIdx + 1, wCount); +} + +#define pcd_set_ep_rx_dbuf1_cnt pcd_set_ep_rx_cnt + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @param wState new state + * @retval None + */ +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPTX_DTOGMASK; + + /* toggle first bit ? */ + if((USB_EPTX_DTOG1 & (wState))!= 0U) + { + regVal ^= USB_EPTX_DTOG1; + } + /* toggle second bit ? */ + if((USB_EPTX_DTOG2 & ((uint32_t)(wState)))!= 0U) + { + regVal ^= USB_EPTX_DTOG2; + } + + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @param wState new state + * @retval None + */ + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPRX_DTOGMASK; + + /* toggle first bit ? */ + if((USB_EPRX_DTOG1 & wState)!= 0U) { + regVal ^= USB_EPRX_DTOG1; + } + /* toggle second bit ? */ + if((USB_EPRX_DTOG2 & wState)!= 0U) { + regVal ^= USB_EPRX_DTOG2; + } + + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + return (regVal & USB_EPRX_STAT) >> (12u); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + if((regVal & USB_EP_DTOG_RX) != 0) { + pcd_rx_dtog(USBx,bEpIdx); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + if((regVal & USB_EP_DTOG_TX) != 0) { + pcd_tx_dtog(USBx,bEpIdx); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal |= USB_EP_KIND; + regVal &= USB_EPREG_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPKIND_MASK; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx, regVal); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h new file mode 100644 index 000000000..b3fa11b88 --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -0,0 +1,292 @@ +/* + * The MIT License (MIT) + * + * Copyright(c) N Conrad + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef TUSB_FSDEV_STM32_H +#define TUSB_FSDEV_STM32_H + +#if CFG_TUSB_MCU == OPT_MCU_STM32F0 + #include "stm32f0xx.h" + #define FSDEV_PMA_SIZE (1024u) + // F0x2 models are crystal-less + // All have internal D+ pull-up + // 070RB: 2 x 16 bits/word memory LPM Support, BCD Support + // PMA dedicated to USB (no sharing with CAN) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32F1 + #include "stm32f1xx.h" + #define FSDEV_PMA_SIZE (512u) + // NO internal Pull-ups + // *B, and *C: 2 x 16 bits/word + + // F1 names this differently from the rest + #define USB_CNTR_LPMODE USB_CNTR_LP_MODE + +#elif defined(STM32F302xB) || defined(STM32F302xC) || \ + defined(STM32F303xB) || defined(STM32F303xC) || \ + defined(STM32F373xC) + #include "stm32f3xx.h" + #define FSDEV_PMA_SIZE (512u) + // NO internal Pull-ups + // *B, and *C: 1 x 16 bits/word + // PMA dedicated to USB (no sharing with CAN) + +#elif defined(STM32F302x6) || defined(STM32F302x8) || \ + defined(STM32F302xD) || defined(STM32F302xE) || \ + defined(STM32F303xD) || defined(STM32F303xE) + #include "stm32f3xx.h" + #define FSDEV_PMA_SIZE (1024u) + // NO internal Pull-ups + // *6, *8, *D, and *E: 2 x 16 bits/word LPM Support + // When CAN clock is enabled, USB can use first 768 bytes ONLY. + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L0 + #include "stm32l0xx.h" + #define FSDEV_PMA_SIZE (1024u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L1 + #include "stm32l1xx.h" + #define FSDEV_PMA_SIZE (512u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32G4 + #include "stm32g4xx.h" + #define FSDEV_PMA_SIZE (1024u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32G0 + #include "stm32g0xx.h" + #define FSDEV_BUS_32BIT + #define FSDEV_PMA_SIZE (2048u) + #undef USB_PMAADDR + #define USB_PMAADDR USB_DRD_PMAADDR + #define USB_TypeDef USB_DRD_TypeDef + #define EP0R CHEP0R + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB USB_DRD_FS + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + +#elif CFG_TUSB_MCU == OPT_MCU_STM32H5 + #include "stm32h5xx.h" + #define FSDEV_BUS_32BIT + + #if !defined(USB_DRD_BASE) && defined(USB_DRD_FS_BASE) + #define USB_DRD_BASE USB_DRD_FS_BASE + #endif + + #define FSDEV_PMA_SIZE (2048u) + #undef USB_PMAADDR + #define USB_PMAADDR USB_DRD_PMAADDR + #define USB_TypeDef USB_DRD_TypeDef + #define EP0R CHEP0R + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB USB_DRD_FS + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + +#elif CFG_TUSB_MCU == OPT_MCU_STM32WB + #include "stm32wbxx.h" + #define FSDEV_PMA_SIZE (1024u) + /* ST provided header has incorrect value */ + #undef USB_PMAADDR + #define USB_PMAADDR USB1_PMAADDR + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L4 + #include "stm32l4xx.h" + #define FSDEV_PMA_SIZE (1024u) + +#elif CFG_TUSB_MCU == OPT_MCU_STM32L5 + #include "stm32l5xx.h" + #define FSDEV_PMA_SIZE (1024u) + + #ifndef USB_PMAADDR + #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) + #endif + +#else + #error You are using an untested or unimplemented STM32 variant. Please update the driver. + // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4 +#endif + +// This checks if the device has "LPM" +#if defined(USB_ISTR_L1REQ) +#define USB_ISTR_L1REQ_FORCED (USB_ISTR_L1REQ) +#else +#define USB_ISTR_L1REQ_FORCED ((uint16_t)0x0000U) +#endif + +#define USB_ISTR_ALL_EVENTS (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_WKUP | USB_ISTR_SUSP | \ + USB_ISTR_RESET | USB_ISTR_SOF | USB_ISTR_ESOF | USB_ISTR_L1REQ_FORCED ) + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +#if TU_CHECK_MCU(OPT_MCU_STM32L1) && !defined(USBWakeUp_IRQn) + #define USBWakeUp_IRQn USB_FS_WKUP_IRQn +#endif + +static const IRQn_Type fsdev_irq[] = { + #if TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32L0, OPT_MCU_STM32L4) + USB_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32F1 + USB_HP_CAN1_TX_IRQn, + USB_LP_CAN1_RX0_IRQn, + USBWakeUp_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32F3 + // USB remap handles dcd functions + USB_HP_CAN_TX_IRQn, + USB_LP_CAN_RX0_IRQn, + USBWakeUp_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32G0 + #ifdef STM32G0B0xx + USB_IRQn, + #else + USB_UCPD1_2_IRQn, + #endif + #elif TU_CHECK_MCU(OPT_MCU_STM32G4, OPT_MCU_STM32L1) + USB_HP_IRQn, + USB_LP_IRQn, + USBWakeUp_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32H5 + USB_DRD_FS_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32L5 + USB_FS_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32WB + USB_HP_IRQn, + USB_LP_IRQn, + #else + #error Unknown arch in USB driver + #endif +}; +enum { FSDEV_IRQ_NUM = TU_ARRAY_SIZE(fsdev_irq) }; + +void dcd_int_enable(uint8_t rhport) { + (void)rhport; + + // forces write to RAM before allowing ISR to execute + __DSB(); __ISB(); + + #if CFG_TUSB_MCU == OPT_MCU_STM32F3 && defined(SYSCFG_CFGR1_USB_IT_RMP) + // Some STM32F302/F303 devices allow to remap the USB interrupt vectors from + // shared USB/CAN IRQs to separate CAN and USB IRQs. + // This dynamically checks if this remap is active to enable the right IRQs. + if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { + NVIC_EnableIRQ(USB_HP_IRQn); + NVIC_EnableIRQ(USB_LP_IRQn); + NVIC_EnableIRQ(USBWakeUp_RMP_IRQn); + } else + #endif + { + for (uint8_t i = 0; i < FSDEV_IRQ_NUM; i++) { + NVIC_EnableIRQ(fsdev_irq[i]); + } + } +} + +void dcd_int_disable(uint8_t rhport) { + (void)rhport; + + #if CFG_TUSB_MCU == OPT_MCU_STM32F3 && defined(SYSCFG_CFGR1_USB_IT_RMP) + // Some STM32F302/F303 devices allow to remap the USB interrupt vectors from + // shared USB/CAN IRQs to separate CAN and USB IRQs. + // This dynamically checks if this remap is active to enable the right IRQs. + if (SYSCFG->CFGR1 & SYSCFG_CFGR1_USB_IT_RMP) { + NVIC_DisableIRQ(USB_HP_IRQn); + NVIC_DisableIRQ(USB_LP_IRQn); + NVIC_DisableIRQ(USBWakeUp_RMP_IRQn); + } else + #endif + { + for (uint8_t i = 0; i < FSDEV_IRQ_NUM; i++) { + NVIC_DisableIRQ(fsdev_irq[i]); + } + } + + // CMSIS has a membar after disabling interrupts +} + +// Define only on MCU with internal pull-up. BSP can define on MCU without internal PU. +#if defined(USB_BCDR_DPPU) + +void dcd_disconnect(uint8_t rhport) { + (void)rhport; + USB->BCDR &= ~(USB_BCDR_DPPU); +} + +void dcd_connect(uint8_t rhport) { + (void)rhport; + USB->BCDR |= USB_BCDR_DPPU; +} + +#elif defined(SYSCFG_PMC_USB_PU) // works e.g. on STM32L151 + +void dcd_disconnect(uint8_t rhport) { + (void)rhport; + SYSCFG->PMC &= ~(SYSCFG_PMC_USB_PU); +} + +void dcd_connect(uint8_t rhport) { + (void)rhport; + SYSCFG->PMC |= SYSCFG_PMC_USB_PU; +} +#endif + + +#endif /* TUSB_FSDEV_STM32_H */ diff --git a/src/tusb_option.h b/src/tusb_option.h index d74510b60..674c05e54 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -374,6 +374,15 @@ #define CFG_TUD_INTERFACE_MAX 16 #endif +// default to max hardware endpoint, but can be smaller to save RAM +#ifndef CFG_TUD_ENDPPOINT_MAX + #define CFG_TUD_ENDPPOINT_MAX TUP_DCD_ENDPOINT_MAX +#endif + +#if CFG_TUD_ENDPPOINT_MAX > TUP_DCD_ENDPOINT_MAX + #error "CFG_TUD_ENDPPOINT_MAX must be less than or equal to TUP_DCD_ENDPOINT_MAX" +#endif + // USB 2.0 compliance test mode support #ifndef CFG_TUD_TEST_MODE #define CFG_TUD_TEST_MODE 0 -- cgit v1.3.1 From a2e5ea1882f130ee22eedbb68296b4b5ce561f77 Mon Sep 17 00:00:00 2001 From: Andrew Leech Date: Wed, 15 May 2024 21:23:39 +1000 Subject: chipidea/mimxrt: Add support for dcd_sof_enable(). --- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'src/portable') diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index f9ec666e5..93e1d78dd 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -309,10 +309,12 @@ void dcd_disconnect(uint8_t rhport) void dcd_sof_enable(uint8_t rhport, bool en) { - (void) rhport; - (void) en; - - // TODO implement later + ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); + if (en) { + dcd_reg->USBINTR |= INTR_SOF; + } else { + dcd_reg->USBINTR &= ~INTR_SOF; + } } //--------------------------------------------------------------------+ @@ -679,7 +681,8 @@ void dcd_int_handler(uint8_t rhport) if (int_status & INTR_SOF) { - dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); + const uint32_t frame = dcd_reg->FRINDEX; + dcd_event_sof(rhport, frame, true); } } -- cgit v1.3.1 From e229270a1c3d542cdf9924313f585dd43c607de8 Mon Sep 17 00:00:00 2001 From: Andrew Leech Date: Thu, 16 May 2024 14:12:22 +1000 Subject: microchip samd: Add support for dcd_sof_enable(). --- src/portable/microchip/samd/dcd_samd.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'src/portable') diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index 976d3dfd0..005b63faf 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -183,9 +183,12 @@ void dcd_connect(uint8_t rhport) void dcd_sof_enable(uint8_t rhport, bool en) { (void) rhport; - (void) en; - // TODO implement later + if (en) { + USB->DEVICE.INTENSET.bit.SOF = 1; + } else { + USB->DEVICE.INTENCLR.bit.SOF = 1; + } } /*------------------------------------------------------------------*/ @@ -374,7 +377,9 @@ void dcd_int_handler (uint8_t rhport) if ( int_status & USB_DEVICE_INTFLAG_SOF ) { USB->DEVICE.INTFLAG.reg = USB_DEVICE_INTFLAG_SOF; - dcd_event_bus_signal(0, DCD_EVENT_SOF, true); + const uint32_t frame = USB->DEVICE.FNUM.bit.FNUM; + dcd_event_sof(0, frame, true); + //dcd_event_bus_signal(0, DCD_EVENT_SOF, true); } // SAMD doesn't distinguish between Suspend and Disconnect state. -- cgit v1.3.1 From 160cd79fdb9fee70894c4d9bfe908af38b88dc46 Mon Sep 17 00:00:00 2001 From: Andrew Leech Date: Thu, 16 May 2024 16:05:36 +1000 Subject: nrf5x: Add support for dcd_sof_enable(). --- src/portable/nordic/nrf5x/dcd_nrf5x.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index bb07063d2..abce35245 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -120,6 +120,9 @@ static struct { // nRF can only carry one DMA at a time, this is used to guard the access to EasyDMA atomic_flag dma_running; + + // Track whether sof has been manually enabled + bool sof_enabled; } _dcd; /*------------------------------------------------------------------*/ @@ -283,9 +286,13 @@ void dcd_connect(uint8_t rhport) { void dcd_sof_enable(uint8_t rhport, bool en) { (void) rhport; - (void) en; - - // TODO implement later + if (en) { + _dcd.sof_enabled = true; + NRF_USBD->INTENSET = USBD_INTENSET_SOF_Msk; + } else { + _dcd.sof_enabled = false; + NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk; + } } //--------------------------------------------------------------------+ @@ -607,13 +614,16 @@ void dcd_int_handler(uint8_t rhport) { } } - if (!iso_enabled) { - // ISO endpoint is not used, SOF is only enabled one-time for remote wakeup - // so we disable it now - NRF_USBD->INTENCLR = USBD_INTENSET_SOF_Msk; + if (!iso_enabled && !_dcd.sof_enabled) { + // SOF interrupt not manually enabled and ISO endpoint is not used, + // SOF is only enabled one-time for remote wakeup so we disable it now + + NRF_USBD->INTENCLR = USBD_INTENCLR_SOF_Msk; } - dcd_event_bus_signal(0, DCD_EVENT_SOF, true); + const uint32_t frame = NRF_USBD->FRAMECNTR; + dcd_event_sof(0, frame, true); + //dcd_event_bus_signal(0, DCD_EVENT_SOF, true); } if (int_status & USBD_INTEN_USBEVENT_Msk) { -- cgit v1.3.1 From 087fe79e2cd8558f62442d530ef23d249112d389 Mon Sep 17 00:00:00 2001 From: Andrew Leech Date: Sun, 19 May 2024 13:43:30 +1000 Subject: renesas: Add support for dcd_sof_enable(). --- src/portable/renesas/rusb2/dcd_rusb2.c | 40 ++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 19 deletions(-) (limited to 'src/portable') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 50400d1f5..7c6044ca0 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -29,10 +29,6 @@ #if CFG_TUD_ENABLED && defined(TUP_USBIP_RUSB2) -// Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval) -// We disable SOF for now until needed later on -#define USE_SOF 0 - #include "device/dcd.h" #include "rusb2_type.h" @@ -74,6 +70,8 @@ typedef struct { pipe_state_t pipe[PIPE_COUNT]; uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */ + // Track whether sof has been manually enabled + bool sof_enabled; } dcd_data_t; static dcd_data_t _dcd; @@ -664,6 +662,10 @@ void dcd_init(uint8_t rhport) rusb2_reg_t* rusb = RUSB2_REG(rhport); rusb2_module_start(rhport, true); +// We disable SOF for now until needed later on. +// Since TinyUSB doesn't use SOF for now, and this interrupt often (1ms interval) +_dcd.sof_enabled = false; + #ifdef RUSB2_SUPPORT_HIGHSPEED if ( rusb2_is_highspeed_rhport(rhport) ) { rusb->SYSCFG_b.HSE = 1; @@ -708,7 +710,7 @@ void dcd_init(uint8_t rhport) rusb->INTSTS0 = 0; rusb->INTENB0 = RUSB2_INTSTS0_VBINT_Msk | RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_BEMP_Msk | - RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_CTRT_Msk | (USE_SOF ? RUSB2_INTSTS0_SOFR_Msk : 0) | + RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_CTRT_Msk | (_dcd.sof_enabled ? RUSB2_INTSTS0_SOFR_Msk : 0) | RUSB2_INTSTS0_RESM_Msk; rusb->BEMPENB = 1; rusb->BRDYENB = 1; @@ -756,10 +758,9 @@ void dcd_disconnect(uint8_t rhport) void dcd_sof_enable(uint8_t rhport, bool en) { - (void) rhport; - (void) en; - - // TODO implement later + rusb2_reg_t* rusb = RUSB2_REG(rhport); + _dcd.sof_enabled = en; + rusb->INTENB0_b.SOFE = en ? 1: 0; } //--------------------------------------------------------------------+ @@ -949,18 +950,19 @@ void dcd_int_handler(uint8_t rhport) // Resumed if ( is0 & RUSB2_INTSTS0_RESM_Msk ) { dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); -#if (0 == USE_SOF) - rusb->INTENB0_b.SOFE = 0; -#endif + if (!_dcd.sof_enabled) { + rusb->INTENB0_b.SOFE = 0; + } } // SOF received if ( (is0 & RUSB2_INTSTS0_SOFR_Msk) && rusb->INTENB0_b.SOFE ) { // USBD will exit suspended mode when SOF event is received - dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); -#if (0 == USE_SOF) - rusb->INTENB0_b.SOFE = 0; -#endif + const uint32_t frame = rusb->FRMNUM_b.FRNM; + dcd_event_sof(rhport, frame, true); + if (!_dcd.sof_enabled) { + rusb->INTENB0_b.SOFE = 0; + } } // Device state changes @@ -979,9 +981,9 @@ void dcd_int_handler(uint8_t rhport) case RUSB2_INTSTS0_DVSQ_STATE_SUSP2: case RUSB2_INTSTS0_DVSQ_STATE_SUSP3: dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); -#if (0 == USE_SOF) - rusb->INTENB0_b.SOFE = 1; -#endif + if (!_dcd.sof_enabled) { + rusb->INTENB0_b.SOFE = 1; + } default: break; } -- cgit v1.3.1 From 8767d1ab7d2a7d3870d9bc6b6624b5f580f63e9d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 29 May 2024 15:19:59 +0700 Subject: fix xtensa_api.h include --- src/portable/espressif/esp32sx/dcd_esp32sx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/espressif/esp32sx/dcd_esp32sx.c b/src/portable/espressif/esp32sx/dcd_esp32sx.c index bfc0baa56..f912bef89 100644 --- a/src/portable/espressif/esp32sx/dcd_esp32sx.c +++ b/src/portable/espressif/esp32sx/dcd_esp32sx.c @@ -31,7 +31,8 @@ #if (((CFG_TUSB_MCU == OPT_MCU_ESP32S2) || (CFG_TUSB_MCU == OPT_MCU_ESP32S3)) && CFG_TUD_ENABLED) // Espressif -#include "xtensa_api.h" +#include "xtensa/xtensa_api.h" + #include "esp_intr_alloc.h" #include "esp_log.h" #include "soc/dport_reg.h" -- cgit v1.3.1 From 4938128cccd3a76907caf546eacee41e53b989e7 Mon Sep 17 00:00:00 2001 From: Tinic Uro Date: Wed, 29 May 2024 12:54:15 -0700 Subject: Make it compile for STM32U545. --- src/portable/synopsys/dwc2/dwc2_stm32.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 3237a50f6..9957976a5 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -89,6 +89,12 @@ extern "C" { #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 + #define USB_OTG_FS_IRQN OTG_FS_IRQn + #elif defined(USB_DRD_FS) + #define USB_OTG_FS_PERIPH_BASE USB_DRD_BASE + #define EP_MAX_FS 6 + #define EP_FIFO_SIZE_FS 1280 + #define USB_OTG_FS_IRQN USB_IRQn #else #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE #define EP_MAX_HS 9 @@ -109,7 +115,7 @@ extern "C" { // - Port0 to OTG_FS, and Port1 to OTG_HS static const dwc2_controller_t _dwc2_controller[] = { #ifdef USB_OTG_FS_PERIPH_BASE - { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = OTG_FS_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, + { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = USB_OTG_FS_IRQN, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, #endif #ifdef USB_OTG_HS_PERIPH_BASE -- cgit v1.3.1 From 22e6b1130fa60b76ed0a1d9b6cc049179606c48c Mon Sep 17 00:00:00 2001 From: Tinic Uro Date: Wed, 29 May 2024 13:13:47 -0700 Subject: Cleaner approach. --- src/portable/synopsys/dwc2/dwc2_stm32.h | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 9957976a5..5743569db 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -84,17 +84,16 @@ extern "C" { #elif CFG_TUSB_MCU == OPT_MCU_STM32U5 #include "stm32u5xx.h" - // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #ifdef USB_OTG_FS #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 - #define USB_OTG_FS_IRQN OTG_FS_IRQn + // U53x/U54x are fullspeed with built-in FS PHY but not OTG #elif defined(USB_DRD_FS) - #define USB_OTG_FS_PERIPH_BASE USB_DRD_BASE + #define USB_DRD_FS_PERIPH_BASE USB_DRD_BASE #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 - #define USB_OTG_FS_IRQN USB_IRQn + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #else #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE #define EP_MAX_HS 9 @@ -114,6 +113,10 @@ extern "C" { // On STM32 for consistency we associate // - Port0 to OTG_FS, and Port1 to OTG_HS static const dwc2_controller_t _dwc2_controller[] = { + #ifdef USB_DRD_FS_PERIPH_BASE + { .reg_base = USB_DRD_FS_PERIPH_BASE, .irqnum = USB_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, + #endif + #ifdef USB_OTG_FS_PERIPH_BASE { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = USB_OTG_FS_IRQN, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, #endif -- cgit v1.3.1 From 2e946ac77a8fda2b4b36c19df5294cd7213d46aa Mon Sep 17 00:00:00 2001 From: Tinic Uro Date: Wed, 29 May 2024 13:23:18 -0700 Subject: Use correct specs. --- src/portable/synopsys/dwc2/dwc2_stm32.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 5743569db..4f311782d 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -91,8 +91,8 @@ extern "C" { // U53x/U54x are fullspeed with built-in FS PHY but not OTG #elif defined(USB_DRD_FS) #define USB_DRD_FS_PERIPH_BASE USB_DRD_BASE - #define EP_MAX_FS 6 - #define EP_FIFO_SIZE_FS 1280 + #define EP_MAX_FS 8 + #define EP_FIFO_SIZE_FS 2048 // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #else #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE -- cgit v1.3.1 From 60d7fcb1ee8dcc4870221e97c1e3fba5463a9d45 Mon Sep 17 00:00:00 2001 From: Tinic Uro Date: Thu, 30 May 2024 13:26:14 -0700 Subject: Use correct backend. --- src/common/tusb_mcu.h | 25 +++++++++++++-------- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 2 +- src/portable/st/stm32_fsdev/fsdev_stm32.h | 31 +++++++++++++++++++++++++++ src/portable/synopsys/dwc2/dwc2_stm32.h | 11 +--------- 4 files changed, 49 insertions(+), 20 deletions(-) (limited to 'src/portable') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index c66996c4f..0f4fca8d1 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -271,17 +271,24 @@ #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U5) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_STM32 + #ifdef USB_DRD_FS + #define TUP_USBIP_FSDEV + #define TUP_USBIP_FSDEV_STM32 + #define TUP_DCD_ENDPOINT_MAX 8 - // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY - #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ - defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_USBIP_DWC2_TEST_MODE #else - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY + #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ + defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_USBIP_DWC2_TEST_MODE + #else + #define TUP_DCD_ENDPOINT_MAX 6 + #endif #endif #elif TU_CHECK_MCU(OPT_MCU_STM32L5) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 9ce37f992..5f230d86f 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -232,7 +232,7 @@ void dcd_init(uint8_t rhport) } USB->CNTR = 0; // Enable USB -#if !defined(STM32G0) && !defined(STM32H5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address +#if !defined(STM32G0) && !defined(STM32H5) && !defined(STM32U5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address USB->BTABLE = DCD_STM32_BTABLE_BASE; #endif USB->ISTR = 0; // Clear pending interrupts diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index b3fa11b88..a5199c9e3 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -159,6 +159,35 @@ #define USB_PMAADDR (USB_BASE + (USB_PMAADDR_NS - USB_BASE_NS)) #endif +#elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + #include "stm32u5xx.h" + #define FSDEV_BUS_32BIT + + #define FSDEV_PMA_SIZE (2048u) + #undef USB_PMAADDR + #define USB_PMAADDR USB_DRD_PMAADDR + #define USB_TypeDef USB_DRD_TypeDef + #define EP0R CHEP0R + #define USB_EP_CTR_RX USB_EP_VTRX + #define USB_EP_CTR_TX USB_EP_VTTX + #define USB_EP_T_FIELD USB_CHEP_UTYPE + #define USB_EPREG_MASK USB_CHEP_REG_MASK + #define USB_EPTX_DTOGMASK USB_CHEP_TX_DTOGMASK + #define USB_EPRX_DTOGMASK USB_CHEP_RX_DTOGMASK + #define USB_EPTX_DTOG1 USB_CHEP_TX_DTOG1 + #define USB_EPTX_DTOG2 USB_CHEP_TX_DTOG2 + #define USB_EPRX_DTOG1 USB_CHEP_RX_DTOG1 + #define USB_EPRX_DTOG2 USB_CHEP_RX_DTOG2 + #define USB_EPRX_STAT USB_CH_RX_VALID + #define USB_EPKIND_MASK USB_EP_KIND_MASK + #define USB USB_DRD_FS + #define USB_CNTR_FRES USB_CNTR_USBRST + #define USB_CNTR_RESUME USB_CNTR_L2RES + #define USB_ISTR_EP_ID USB_ISTR_IDN + #define USB_EPADDR_FIELD USB_CHEP_ADDR + #define USB_CNTR_LPMODE USB_CNTR_SUSPRDY + #define USB_CNTR_FSUSP USB_CNTR_SUSPEN + #else #error You are using an untested or unimplemented STM32 variant. Please update the driver. // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4 @@ -211,6 +240,8 @@ static const IRQn_Type fsdev_irq[] = { #elif CFG_TUSB_MCU == OPT_MCU_STM32WB USB_HP_IRQn, USB_LP_IRQn, + #elif CFG_TUSB_MCU == OPT_MCU_STM32U5 + USB_IRQn, #else #error Unknown arch in USB driver #endif diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 4f311782d..eaac2c44b 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -84,16 +84,11 @@ extern "C" { #elif CFG_TUSB_MCU == OPT_MCU_STM32U5 #include "stm32u5xx.h" + // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #ifdef USB_OTG_FS #define USB_OTG_FS_PERIPH_BASE USB_OTG_FS_BASE #define EP_MAX_FS 6 #define EP_FIFO_SIZE_FS 1280 - // U53x/U54x are fullspeed with built-in FS PHY but not OTG - #elif defined(USB_DRD_FS) - #define USB_DRD_FS_PERIPH_BASE USB_DRD_BASE - #define EP_MAX_FS 8 - #define EP_FIFO_SIZE_FS 2048 - // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #else #define USB_OTG_HS_PERIPH_BASE USB_OTG_HS_BASE #define EP_MAX_HS 9 @@ -113,10 +108,6 @@ extern "C" { // On STM32 for consistency we associate // - Port0 to OTG_FS, and Port1 to OTG_HS static const dwc2_controller_t _dwc2_controller[] = { - #ifdef USB_DRD_FS_PERIPH_BASE - { .reg_base = USB_DRD_FS_PERIPH_BASE, .irqnum = USB_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, - #endif - #ifdef USB_OTG_FS_PERIPH_BASE { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = USB_OTG_FS_IRQN, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, #endif -- cgit v1.3.1 From 28c243337591f0ac7745f11737d907d47f0e6320 Mon Sep 17 00:00:00 2001 From: Tinic Uro Date: Wed, 12 Jun 2024 08:08:25 -0700 Subject: Add stm32u545nucleo board. --- hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk | 1 + hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk | 1 + hw/bsp/stm32u5/family.c | 17 ++++++++++++++++- hw/bsp/stm32u5/family.cmake | 14 ++++++++++---- hw/bsp/stm32u5/family.mk | 14 ++++++++++++-- src/portable/synopsys/dwc2/dwc2_stm32.h | 2 +- 6 files changed, 41 insertions(+), 8 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk index 1dd157a68..c83ec3999 100644 --- a/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u575nucleo/board.mk @@ -6,5 +6,6 @@ LD_FILE = ${FAMILY_PATH}/linker/STM32U575xx_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u575xx.s +MCU_VARIANT = stm32u575xx # For flash-jlink target JLINK_DEVICE = stm32u575zi diff --git a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk index e759cec24..4bebe3330 100644 --- a/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk +++ b/hw/bsp/stm32u5/boards/stm32u5a5nucleo/board.mk @@ -7,5 +7,6 @@ LD_FILE = ${BOARD_PATH}/STM32U5A5ZJTXQ_FLASH.ld SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32u5a5xx.s +MCU_VARIANT = stm32u5a5xx # For flash-jlink target JLINK_DEVICE = stm32u575zi diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index d779b5c96..0f0868839 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -72,7 +72,9 @@ void board_init(void) { __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOD_CLK_ENABLE(); __HAL_RCC_GPIOE_CLK_ENABLE(); +#ifdef GPIOF __HAL_RCC_GPIOF_CLK_ENABLE(); +#endif __HAL_RCC_GPIOG_CLK_ENABLE(); __HAL_RCC_GPIOH_CLK_ENABLE(); @@ -140,6 +142,17 @@ void board_init(void) { GPIO_InitStruct.Alternate = GPIO_AF10_USB; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); +#ifdef USB_OTG_HS + // STM32U535/STM32U545 + + /* Enable USB power on Pwrctrl CR2 register */ + HAL_PWREx_EnableVddUSB(); + + /* USB clock enable */ + __HAL_RCC_USB_FS_CLK_ENABLE(); + +#endif + #ifdef USB_OTG_FS #if CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) @@ -170,7 +183,9 @@ void board_init(void) { /* USB clock enable */ __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); -#else +#endif + +#ifdef USB_OTG_HS // STM59x/Ax/Fx/Gx only have 1 USB HS port #if CFG_TUSB_OS == OPT_OS_FREERTOS diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 7402540b7..c19bce64b 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -102,10 +102,16 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32U5 ${RTOS}) - target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - #${TOP}/src/portable/st/typec/typec_stm32.c - ) + if ((${MCU_VARIANT} EQUAL "stm32u535xx") OR (${MCU_VARIANT} EQUAL "stm32u545xx")) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ) + else () + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + #${TOP}/src/portable/st/typec/typec_stm32.c + ) + endif () target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index be5809340..45f9aa33e 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -27,18 +27,28 @@ LDFLAGS_GCC += \ --specs=nosys.specs --specs=nano.specs SRC_C += \ - src/portable/synopsys/dwc2/dcd_dwc2.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_icache.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_icache.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c +ifeq ($(MCU_VARIANT),stm32u545xx) +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +else ($(MCU_VARIANT),stm32u535xx) +SRC_C += \ + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +else +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c +endif + INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index eaac2c44b..3237a50f6 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -109,7 +109,7 @@ extern "C" { // - Port0 to OTG_FS, and Port1 to OTG_HS static const dwc2_controller_t _dwc2_controller[] = { #ifdef USB_OTG_FS_PERIPH_BASE - { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = USB_OTG_FS_IRQN, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, + { .reg_base = USB_OTG_FS_PERIPH_BASE, .irqnum = OTG_FS_IRQn, .ep_count = EP_MAX_FS, .ep_fifo_size = EP_FIFO_SIZE_FS }, #endif #ifdef USB_OTG_HS_PERIPH_BASE -- cgit v1.3.1 From 2ed027f2bdedae81f20d7417ad7f018a6de9357a Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 14 Jun 2024 12:51:28 +0700 Subject: use stock core_riscv.h for ch32 v2 v3 --- hw/bsp/ch32v20x/core_riscv.h | 572 ------------------------------- hw/bsp/ch32v20x/family.c | 12 + hw/bsp/ch32v20x/family.cmake | 1 + hw/bsp/ch32v20x/family.mk | 4 + hw/bsp/ch32v307/core_riscv.h | 379 -------------------- hw/bsp/ch32v307/debug_uart.c | 9 + hw/bsp/ch32v307/family.c | 13 + hw/bsp/ch32v307/family.cmake | 1 + hw/bsp/ch32v307/family.mk | 4 + src/portable/st/stm32_fsdev/fsdev_ch32.h | 12 +- src/portable/wch/ch32_usbfs_reg.h | 11 + src/portable/wch/ch32_usbhs_reg.h | 12 + 12 files changed, 78 insertions(+), 952 deletions(-) delete mode 100644 hw/bsp/ch32v20x/core_riscv.h delete mode 100644 hw/bsp/ch32v307/core_riscv.h (limited to 'src/portable') diff --git a/hw/bsp/ch32v20x/core_riscv.h b/hw/bsp/ch32v20x/core_riscv.h deleted file mode 100644 index be1b52a6c..000000000 --- a/hw/bsp/ch32v20x/core_riscv.h +++ /dev/null @@ -1,572 +0,0 @@ -/********************************** (C) COPYRIGHT ******************************* - * File Name : core_riscv.h - * Author : WCH - * Version : V1.0.0 - * Date : 2021/06/06 - * Description : RISC-V Core Peripheral Access Layer Header File for CH32V20x -********************************************************************************* -* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. -* Attention: This software (modified or not) and binary are used for -* microcontroller manufactured by Nanjing Qinheng Microelectronics. -*******************************************************************************/ -#ifndef __CORE_RISCV_H__ -#define __CORE_RISCV_H__ - -#ifdef __cplusplus -extern "C" { -#endif - -/* IO definitions */ -#ifdef __cplusplus - #define __I volatile /* defines 'read only' permissions */ -#else - #define __I volatile const /* defines 'read only' permissions */ -#endif -#define __O volatile /* defines 'write only' permissions */ -#define __IO volatile /* defines 'read / write' permissions */ - -/* Standard Peripheral Library old types (maintained for legacy purpose) */ -typedef __I uint64_t vuc64; /* Read Only */ -typedef __I uint32_t vuc32; /* Read Only */ -typedef __I uint16_t vuc16; /* Read Only */ -typedef __I uint8_t vuc8; /* Read Only */ - -typedef const uint64_t uc64; /* Read Only */ -typedef const uint32_t uc32; /* Read Only */ -typedef const uint16_t uc16; /* Read Only */ -typedef const uint8_t uc8; /* Read Only */ - -typedef __I int64_t vsc64; /* Read Only */ -typedef __I int32_t vsc32; /* Read Only */ -typedef __I int16_t vsc16; /* Read Only */ -typedef __I int8_t vsc8; /* Read Only */ - -typedef const int64_t sc64; /* Read Only */ -typedef const int32_t sc32; /* Read Only */ -typedef const int16_t sc16; /* Read Only */ -typedef const int8_t sc8; /* Read Only */ - -typedef __IO uint64_t vu64; -typedef __IO uint32_t vu32; -typedef __IO uint16_t vu16; -typedef __IO uint8_t vu8; - -typedef uint64_t u64; -typedef uint32_t u32; -typedef uint16_t u16; -typedef uint8_t u8; - -typedef __IO int64_t vs64; -typedef __IO int32_t vs32; -typedef __IO int16_t vs16; -typedef __IO int8_t vs8; - -typedef int64_t s64; -typedef int32_t s32; -typedef int16_t s16; -typedef int8_t s8; - -typedef enum {NoREADY = 0, READY = !NoREADY} ErrorStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -#define RV_STATIC_INLINE static inline - -/* memory mapped structure for Program Fast Interrupt Controller (PFIC) */ -typedef struct{ - __I uint32_t ISR[8]; - __I uint32_t IPR[8]; - __IO uint32_t ITHRESDR; - __IO uint32_t RESERVED; - __IO uint32_t CFGR; - __I uint32_t GISR; - __IO uint8_t VTFIDR[4]; - uint8_t RESERVED0[12]; - __IO uint32_t VTFADDR[4]; - uint8_t RESERVED1[0x90]; - __O uint32_t IENR[8]; - uint8_t RESERVED2[0x60]; - __O uint32_t IRER[8]; - uint8_t RESERVED3[0x60]; - __O uint32_t IPSR[8]; - uint8_t RESERVED4[0x60]; - __O uint32_t IPRR[8]; - uint8_t RESERVED5[0x60]; - __IO uint32_t IACTR[8]; - uint8_t RESERVED6[0xE0]; - __IO uint8_t IPRIOR[256]; - uint8_t RESERVED7[0x810]; - __IO uint32_t SCTLR; -}PFIC_Type; - -/* memory mapped structure for SysTick */ -typedef struct -{ - __IO uint32_t CTLR; - __IO uint32_t SR; - __IO uint64_t CNT; - __IO uint64_t CMP; -}SysTick_Type; - -#define PFIC ((PFIC_Type *) 0xE000E000 ) -#define NVIC PFIC -#define NVIC_KEY1 ((uint32_t)0xFA050000) -#define NVIC_KEY2 ((uint32_t)0xBCAF0000) -#define NVIC_KEY3 ((uint32_t)0xBEEF0000) - -#define SysTick ((SysTick_Type *) 0xE000F000) - -/********************************************************************* - * @fn __enable_irq - * - * @brief Enable Global Interrupt - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __enable_irq(void) -{ - __asm volatile ("csrw 0x800, %0" : : "r" (0x6088) ); -} - -/********************************************************************* - * @fn __disable_irq - * - * @brief Disable Global Interrupt - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __disable_irq(void) -{ - __asm volatile ("csrw 0x800, %0" : : "r" (0x6000) ); -} - -/********************************************************************* - * @fn __NOP - * - * @brief nop - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __NOP(void) -{ - __asm volatile ("nop"); -} - -/********************************************************************* - * @fn NVIC_EnableIRQ - * - * @brief Disable Interrupt - * - * @param IRQn - Interrupt Numbers - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->IENR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_DisableIRQ - * - * @brief Disable Interrupt - * - * @param IRQn - Interrupt Numbers - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->IRER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_GetStatusIRQ - * - * @brief Get Interrupt Enable State - * - * @param IRQn - Interrupt Numbers - * - * @return 1 - Interrupt Pending Enable - * 0 - Interrupt Pending Disable - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetStatusIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} - -/********************************************************************* - * @fn NVIC_GetPendingIRQ - * - * @brief Get Interrupt Pending State - * - * @param IRQn - Interrupt Numbers - * - * @return 1 - Interrupt Pending Enable - * 0 - Interrupt Pending Disable - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->IPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} - -/********************************************************************* - * @fn NVIC_SetPendingIRQ - * - * @brief Set Interrupt Pending - * - * @param IRQn - Interrupt Numbers - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->IPSR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_ClearPendingIRQ - * - * @brief Clear Interrupt Pending - * - * @param IRQn - Interrupt Numbers - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->IPRR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_GetActive - * - * @brief Get Interrupt Active State - * - * @param IRQn - Interrupt Numbers - * - * @return 1 - Interrupt Active - * 0 - Interrupt No Active - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)((NVIC->IACTR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} - -/********************************************************************* - * @fn NVIC_SetPriority - * - * @brief Set Interrupt Priority - * - * @param IRQn - Interrupt Numbers - * priority - bit7 - Pre-emption Priority - * bit[6:5] - Subpriority - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint8_t priority) -{ - NVIC->IPRIOR[(uint32_t)(IRQn)] = priority; -} - -/********************************************************************* - * @fn __WFI - * - * @brief Wait for Interrupt - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFI(void) -{ - NVIC->SCTLR &= ~(1<<3); // wfi - asm volatile ("wfi"); -} - -/********************************************************************* - * @fn _SEV - * - * @brief Set Event - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _SEV(void) -{ - uint32_t t; - - t = NVIC->SCTLR; - NVIC->SCTLR |= (1<<3)|(1<<5); - NVIC->SCTLR = (NVIC->SCTLR & ~(1<<5)) | ( t & (1<<5)); -} - -/********************************************************************* - * @fn _WFE - * - * @brief Wait for Events - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void _WFE(void) -{ - NVIC->SCTLR |= (1<<3); - asm volatile ("wfi"); -} - -/********************************************************************* - * @fn __WFE - * - * @brief Wait for Events - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFE(void) -{ - _SEV(); - _WFE(); - _WFE(); -} - -/********************************************************************* - * @fn SetVTFIRQ - * - * @brief Set VTF Interrupt - * - * @param addr - VTF interrupt service function base address. - * IRQn - Interrupt Numbers - * num - VTF Interrupt Numbers - * NewState - DISABLE or ENABLE - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void SetVTFIRQ(uint32_t addr, IRQn_Type IRQn, uint8_t num, FunctionalState NewState){ - if(num > 3) return ; - - if (NewState != DISABLE) - { - NVIC->VTFIDR[num] = IRQn; - NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)|0x1); - } - else{ - NVIC->VTFIDR[num] = IRQn; - NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)&(~0x1)); - } -} - -/********************************************************************* - * @fn NVIC_SystemReset - * - * @brief Initiate a system reset request - * - * @return none - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void NVIC_SystemReset(void) -{ - NVIC->CFGR = NVIC_KEY3|(1<<7); -} - -/********************************************************************* - * @fn __AMOADD_W - * - * @brief Atomic Add with 32bit value - * Atomically ADD 32bit value with value in memory using amoadd.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be ADDed - * - * @return return memory value + add value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOADD_W(volatile int32_t *addr, int32_t value) -{ - int32_t result; - - __asm volatile ("amoadd.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/********************************************************************* - * @fn __AMOAND_W - * - * @brief Atomic And with 32bit value - * Atomically AND 32bit value with value in memory using amoand.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be ANDed - * - * @return return memory value & and value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOAND_W(volatile int32_t *addr, int32_t value) -{ - int32_t result; - - __asm volatile ("amoand.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/********************************************************************* - * @fn __AMOMAX_W - * - * @brief Atomic signed MAX with 32bit value - * Atomically signed max compare 32bit value with value in memory using amomax.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be compared - * - * @return the bigger value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMAX_W(volatile int32_t *addr, int32_t value) -{ - int32_t result; - - __asm volatile ("amomax.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/********************************************************************* - * @fn __AMOMAXU_W - * - * @brief Atomic unsigned MAX with 32bit value - * Atomically unsigned max compare 32bit value with value in memory using amomaxu.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be compared - * - * @return return the bigger value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMAXU_W(volatile uint32_t *addr, uint32_t value) -{ - uint32_t result; - - __asm volatile ("amomaxu.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/********************************************************************* - * @fn __AMOMIN_W - * - * @brief Atomic signed MIN with 32bit value - * Atomically signed min compare 32bit value with value in memory using amomin.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be compared - * - * @return the smaller value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOMIN_W(volatile int32_t *addr, int32_t value) -{ - int32_t result; - - __asm volatile ("amomin.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/********************************************************************* - * @fn __AMOMINU_W - * - * @brief Atomic unsigned MIN with 32bit value - * Atomically unsigned min compare 32bit value with value in memory using amominu.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be compared - * - * @return the smaller value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOMINU_W(volatile uint32_t *addr, uint32_t value) -{ - uint32_t result; - - __asm volatile ("amominu.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/********************************************************************* - * @fn __AMOOR_W - * - * @brief Atomic OR with 32bit value - * Atomically OR 32bit value with value in memory using amoor.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be ORed - * - * @return return memory value | and value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOOR_W(volatile int32_t *addr, int32_t value) -{ - int32_t result; - - __asm volatile ("amoor.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/********************************************************************* - * @fn __AMOSWAP_W - * - * @brief Atomically swap new 32bit value into memory using amoswap.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * newval - New value to be stored into the address - * - * @return return the original value in memory - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE uint32_t __AMOSWAP_W(volatile uint32_t *addr, uint32_t newval) -{ - uint32_t result; - - __asm volatile ("amoswap.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(newval) : "memory"); - return result; -} - -/********************************************************************* - * @fn __AMOXOR_W - * - * @brief Atomic XOR with 32bit value - * Atomically XOR 32bit value with value in memory using amoxor.d. - * - * @param addr - Address pointer to data, address need to be 4byte aligned - * value - value to be XORed - * - * @return return memory value ^ and value - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE int32_t __AMOXOR_W(volatile int32_t *addr, int32_t value) -{ - int32_t result; - - __asm volatile ("amoxor.w %0, %2, %1" : \ - "=r"(result), "+A"(*addr) : "r"(value) : "memory"); - return *addr; -} - -/* Core_Exported_Functions */ -extern uint32_t __get_MSTATUS(void); -extern void __set_MSTATUS(uint32_t value); -extern uint32_t __get_MISA(void); -extern void __set_MISA(uint32_t value); -extern uint32_t __get_MTVEC(void); -extern void __set_MTVEC(uint32_t value); -extern uint32_t __get_MSCRATCH(void); -extern void __set_MSCRATCH(uint32_t value); -extern uint32_t __get_MEPC(void); -extern void __set_MEPC(uint32_t value); -extern uint32_t __get_MCAUSE(void); -extern void __set_MCAUSE(uint32_t value); -extern uint32_t __get_MTVAL(void); -extern void __set_MTVAL(uint32_t value); -extern uint32_t __get_MVENDORID(void); -extern uint32_t __get_MARCHID(void); -extern uint32_t __get_MIMPID(void); -extern uint32_t __get_MHARTID(void); -extern uint32_t __get_SP(void); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index c32cfd46e..8575f5699 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -1,6 +1,18 @@ #include + +// https://github.com/openwch/ch32v307/pull/90 +// https://github.com/openwch/ch32v20x/pull/12 +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + #include "ch32v20x.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 1d574fdf8..28fd13697 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -49,6 +49,7 @@ function(add_board_target BOARD_TARGET) ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_SRC_DIR}/Core ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 49d4d2feb..daf3148f8 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -24,6 +24,9 @@ CFLAGS += \ -DCH32V20x_${MCU_VARIANT} \ -DCFG_TUSB_MCU=OPT_MCU_CH32V20X +# https://github.com/openwch/ch32v20x/pull/12 +CFLAGS += -Wno-error=strict-prototypes + ifeq ($(PORT),0) $(info "Using FSDEV driver") CFLAGS += -DCFG_TUD_WCH_USBIP_FSDEV=1 @@ -51,6 +54,7 @@ SRC_S += $(SDK_SRC_DIR)/Startup/startup_ch32v20x_${MCU_VARIANT}.S INC += \ $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_SRC_DIR)/Core \ $(TOP)/$(SDK_SRC_DIR)/Peripheral/inc \ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V diff --git a/hw/bsp/ch32v307/core_riscv.h b/hw/bsp/ch32v307/core_riscv.h deleted file mode 100644 index a7ce10a00..000000000 --- a/hw/bsp/ch32v307/core_riscv.h +++ /dev/null @@ -1,379 +0,0 @@ -/********************************** (C) COPYRIGHT ******************************* -* File Name : core_riscv.h -* Author : WCH -* Version : V1.0.0 -* Date : 2021/06/06 -* Description : RISC-V Core Peripheral Access Layer Header File for CH32V30x -* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. -* SPDX-License-Identifier: Apache-2.0 -*******************************************************************************/ -#ifndef __CORE_RISCV_H__ -#define __CORE_RISCV_H__ - -/* IO definitions */ -#ifdef __cplusplus - #define __I volatile /* defines 'read only' permissions */ -#else - #define __I volatile const /* defines 'read only' permissions */ -#endif -#define __O volatile /* defines 'write only' permissions */ -#define __IO volatile /* defines 'read / write' permissions */ - -/* Standard Peripheral Library old types (maintained for legacy purpose) */ -typedef __I uint64_t vuc64; /* Read Only */ -typedef __I uint32_t vuc32; /* Read Only */ -typedef __I uint16_t vuc16; /* Read Only */ -typedef __I uint8_t vuc8; /* Read Only */ - -typedef const uint64_t uc64; /* Read Only */ -typedef const uint32_t uc32; /* Read Only */ -typedef const uint16_t uc16; /* Read Only */ -typedef const uint8_t uc8; /* Read Only */ - -typedef __I int64_t vsc64; /* Read Only */ -typedef __I int32_t vsc32; /* Read Only */ -typedef __I int16_t vsc16; /* Read Only */ -typedef __I int8_t vsc8; /* Read Only */ - -typedef const int64_t sc64; /* Read Only */ -typedef const int32_t sc32; /* Read Only */ -typedef const int16_t sc16; /* Read Only */ -typedef const int8_t sc8; /* Read Only */ - -typedef __IO uint64_t vu64; -typedef __IO uint32_t vu32; -typedef __IO uint16_t vu16; -typedef __IO uint8_t vu8; - -typedef uint64_t u64; -typedef uint32_t u32; -typedef uint16_t u16; -typedef uint8_t u8; - -typedef __IO int64_t vs64; -typedef __IO int32_t vs32; -typedef __IO int16_t vs16; -typedef __IO int8_t vs8; - -typedef int64_t s64; -typedef int32_t s32; -typedef int16_t s16; -typedef int8_t s8; - -typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -#define RV_STATIC_INLINE static inline - -/* memory mapped structure for Program Fast Interrupt Controller (PFIC) */ -typedef struct{ - __I uint32_t ISR[8]; - __I uint32_t IPR[8]; - __IO uint32_t ITHRESDR; - __IO uint32_t RESERVED; - __IO uint32_t CFGR; - __I uint32_t GISR; - uint8_t VTFIDR[4]; - uint8_t RESERVED0[12]; - __IO uint32_t VTFADDR[4]; - uint8_t RESERVED1[0x90]; - __O uint32_t IENR[8]; - uint8_t RESERVED2[0x60]; - __O uint32_t IRER[8]; - uint8_t RESERVED3[0x60]; - __O uint32_t IPSR[8]; - uint8_t RESERVED4[0x60]; - __O uint32_t IPRR[8]; - uint8_t RESERVED5[0x60]; - __IO uint32_t IACTR[8]; - uint8_t RESERVED6[0xE0]; - __IO uint8_t IPRIOR[256]; - uint8_t RESERVED7[0x810]; - __IO uint32_t SCTLR; -}PFIC_Type; - -/* memory mapped structure for SysTick */ -typedef struct -{ - __IO u32 CTLR; - __IO u32 SR; - __IO u64 CNT; - __IO u64 CMP; -}SysTick_Type; - - -#define PFIC ((PFIC_Type *) 0xE000E000 ) -#define NVIC PFIC -#define NVIC_KEY1 ((uint32_t)0xFA050000) -#define NVIC_KEY2 ((uint32_t)0xBCAF0000) -#define NVIC_KEY3 ((uint32_t)0xBEEF0000) - -#define SysTick ((SysTick_Type *) 0xE000F000) - - -/********************************************************************* - * @fn __enable_irq - * - * @brief Enable Global Interrupt - * - * @return none - */ -RV_STATIC_INLINE void __enable_irq(void) -{ - __asm volatile ("csrw 0x800, %0" : : "r" (0x6088) ); -} - -/********************************************************************* - * @fn __disable_irq - * - * @brief Disable Global Interrupt - * - * @return none - */ -RV_STATIC_INLINE void __disable_irq(void) -{ - __asm volatile ("csrw 0x800, %0" : : "r" (0x6000) ); -} - -/********************************************************************* - * @fn __NOP - * - * @brief nop - * - * @return none - */ -RV_STATIC_INLINE void __NOP(void) -{ - __asm volatile ("nop"); -} - -/********************************************************************* - * @fn NVIC_EnableIRQ - * - * @brief Enable Interrupt - * - * @param IRQn: Interrupt Numbers - * - * @return none - */ -RV_STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->IENR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_DisableIRQ - * - * @brief Disable Interrupt - * - * @param IRQn: Interrupt Numbers - * - * @return none - */ -RV_STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->IRER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_GetStatusIRQ - * - * @brief Get Interrupt Enable State - * - * @param IRQn: Interrupt Numbers - * - * @return 1 - Interrupt Enable - * 0 - Interrupt Disable - */ -RV_STATIC_INLINE uint32_t NVIC_GetStatusIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} - -/********************************************************************* - * @fn NVIC_GetPendingIRQ - * - * @brief Get Interrupt Pending State - * - * @param IRQn: Interrupt Numbers - * - * @return 1 - Interrupt Pending Enable - * 0 - Interrupt Pending Disable - */ -RV_STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->IPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} - -/********************************************************************* - * @fn NVIC_SetPendingIRQ - * - * @brief Set Interrupt Pending - * - * @param IRQn: Interrupt Numbers - * - * @return None - */ -RV_STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->IPSR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_ClearPendingIRQ - * - * @brief Clear Interrupt Pending - * - * @param IRQn: Interrupt Numbers - * - * @return None - */ -RV_STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->IPRR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); -} - -/********************************************************************* - * @fn NVIC_GetActive - * - * @brief Get Interrupt Active State - * - * @param IRQn: Interrupt Numbers - * - * @return 1 - Interrupt Active - * 0 - Interrupt No Active - */ -RV_STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)((NVIC->IACTR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); -} - -/********************************************************************* - * @fn NVIC_SetPriority - * - * @brief Set Interrupt Priority - * - * @param IRQn - Interrupt Numbers - * priority - - * bit7 - pre-emption priority - * bit6~bit4 - subpriority - * @return None - */ -RV_STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint8_t priority) -{ - NVIC->IPRIOR[(uint32_t)(IRQn)] = priority; -} - -/********************************************************************* - * @fn __WFI - * - * @brief Wait for Interrupt - * - * @return None - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFI(void) -{ - NVIC->SCTLR &= ~(1<<3); // wfi - asm volatile ("wfi"); -} - -/********************************************************************* - * @fn __WFE - * - * @brief Wait for Events - * - * @return None - */ -__attribute__( ( always_inline ) ) RV_STATIC_INLINE void __WFE(void) -{ - uint32_t t; - - t = NVIC->SCTLR; - NVIC->SCTLR |= (1<<3)|(1<<5); // (wfi->wfe)+(__sev) - NVIC->SCTLR = (NVIC->SCTLR & ~(1<<5)) | ( t & (1<<5)); - asm volatile ("wfi"); - asm volatile ("wfi"); -} - -/********************************************************************* - * @fn SetVTFIRQ - * - * @brief Set VTF Interrupt - * - * @param add - VTF interrupt service function base address. - * IRQn -Interrupt Numbers - * num - VTF Interrupt Numbers - * NewState - DISABLE or ENABLE - * @return None - */ -RV_STATIC_INLINE void SetVTFIRQ(uint32_t addr, IRQn_Type IRQn, uint8_t num, FunctionalState NewState){ - if(num > 3) return ; - - if (NewState != DISABLE) - { - NVIC->VTFIDR[num] = IRQn; - NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)|0x1); - } - else{ - NVIC->VTFIDR[num] = IRQn; - NVIC->VTFADDR[num] = ((addr&0xFFFFFFFE)&(~0x1)); - } -} - -/********************************************************************* - * @fn NVIC_SystemReset - * - * @brief Initiate a system reset request - * - * @return None - */ -RV_STATIC_INLINE void NVIC_SystemReset(void) -{ - NVIC->CFGR = NVIC_KEY3|(1<<7); -} - - -/* Core_Exported_Functions */ -extern uint32_t __get_FFLAGS(void); -extern void __set_FFLAGS(uint32_t value); -extern uint32_t __get_FRM(void); -extern void __set_FRM(uint32_t value); -extern uint32_t __get_FCSR(void); -extern void __set_FCSR(uint32_t value); -extern uint32_t __get_MSTATUS(void); -extern void __set_MSTATUS(uint32_t value); -extern uint32_t __get_MISA(void); -extern void __set_MISA(uint32_t value); -extern uint32_t __get_MIE(void); -extern void __set_MIE(uint32_t value); -extern uint32_t __get_MTVEC(void); -extern void __set_MTVEC(uint32_t value); -extern uint32_t __get_MSCRATCH(void); -extern void __set_MSCRATCH(uint32_t value); -extern uint32_t __get_MEPC(void); -extern void __set_MEPC(uint32_t value); -extern uint32_t __get_MCAUSE(void); -extern void __set_MCAUSE(uint32_t value); -extern uint32_t __get_MTVAL(void); -extern void __set_MTVAL(uint32_t value); -extern uint32_t __get_MIP(void); -extern void __set_MIP(uint32_t value); -extern uint32_t __get_MCYCLE(void); -extern void __set_MCYCLE(uint32_t value); -extern uint32_t __get_MCYCLEH(void); -extern void __set_MCYCLEH(uint32_t value); -extern uint32_t __get_MINSTRET(void); -extern void __set_MINSTRET(uint32_t value); -extern uint32_t __get_MINSTRETH(void); -extern void __set_MINSTRETH(uint32_t value); -extern uint32_t __get_MVENDORID(void); -extern uint32_t __get_MARCHID(void); -extern uint32_t __get_MIMPID(void); -extern uint32_t __get_MHARTID(void); -extern uint32_t __get_SP(void); - - -#endif diff --git a/hw/bsp/ch32v307/debug_uart.c b/hw/bsp/ch32v307/debug_uart.c index fbabeeadc..2fd3a9d64 100644 --- a/hw/bsp/ch32v307/debug_uart.c +++ b/hw/bsp/ch32v307/debug_uart.c @@ -25,8 +25,17 @@ */ #include "debug_uart.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + #include +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif #define UART_RINGBUFFER_SIZE_TX 128 #define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1) diff --git a/hw/bsp/ch32v307/family.c b/hw/bsp/ch32v307/family.c index 0846b10a9..adf2dbea5 100644 --- a/hw/bsp/ch32v307/family.c +++ b/hw/bsp/ch32v307/family.c @@ -25,9 +25,22 @@ */ #include "stdio.h" + +// https://github.com/openwch/ch32v307/pull/90 +// https://github.com/openwch/ch32v20x/pull/12 + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + #include "debug_uart.h" #include "ch32v30x.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + #include "bsp/board_api.h" #include "board.h" diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index af26bfc31..d603af62d 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -49,6 +49,7 @@ function(add_board_target BOARD_TARGET) ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_SRC_DIR}/Core ${SDK_SRC_DIR}/Peripheral/inc ${CMAKE_CURRENT_FUNCTION_LIST_DIR} ) diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 30a070a9b..bf2732106 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -25,6 +25,9 @@ CFLAGS += \ -fsigned-char \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ +# https://github.com/openwch/ch32v307/pull/90 +CFLAGS += -Wno-error=strict-prototypes + ifeq ($(SPEED),high) $(info "Using USBHS driver for HighSpeed mode") CFLAGS += -DCFG_TUD_WCH_USBIP_USBHS=1 @@ -51,6 +54,7 @@ SRC_S += \ INC += \ $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_SRC_DIR)/Core \ $(TOP)/$(SDK_SRC_DIR)/Peripheral/inc # For freeRTOS port source diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h index 85fe3266c..dbf2a0289 100644 --- a/src/portable/st/stm32_fsdev/fsdev_ch32.h +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -36,13 +36,23 @@ #include "common/tusb_compiler.h" +// https://github.com/openwch/ch32v307/pull/90 +// https://github.com/openwch/ch32v20x/pull/12 +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + #if CFG_TUSB_MCU == OPT_MCU_CH32V20X #include - #elif CFG_TUSB_MCU == OPT_MCU_CH32F20X #include #endif +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + #define FSDEV_PMA_SIZE (512u) // volatile 32-bit aligned diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h index 0a50a6169..ef6ebf2dc 100644 --- a/src/portable/wch/ch32_usbfs_reg.h +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -28,6 +28,13 @@ #ifndef USB_CH32_USBFS_REG_H #define USB_CH32_USBFS_REG_H +// https://github.com/openwch/ch32v307/pull/90 +// https://github.com/openwch/ch32v20x/pull/12 +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + #if CFG_TUSB_MCU == OPT_MCU_CH32V307 #include #define USBHD_IRQn OTG_FS_IRQn @@ -39,6 +46,10 @@ #include #endif +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + // CTRL #define USBFS_CTRL_DMA_EN (1 << 0) #define USBFS_CTRL_CLR_ALL (1 << 1) diff --git a/src/portable/wch/ch32_usbhs_reg.h b/src/portable/wch/ch32_usbhs_reg.h index 130e4f223..87300b497 100644 --- a/src/portable/wch/ch32_usbhs_reg.h +++ b/src/portable/wch/ch32_usbhs_reg.h @@ -28,12 +28,24 @@ #ifndef USB_CH32_USBHS_REG_H #define USB_CH32_USBHS_REG_H +// https://github.com/openwch/ch32v307/pull/90 +// https://github.com/openwch/ch32v20x/pull/12 +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + #if CFG_TUSB_MCU == OPT_MCU_CH32V307 #include #elif CFG_TUSB_MCU == OPT_MCU_CH32F20X #include #endif +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + + /******************* GLOBAL ******************/ // USB CONTROL -- cgit v1.3.1 From 33f5547ed435f33259afc2a8e906eb7a258fbdd6 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 14 Jun 2024 16:06:37 +0700 Subject: add ch32v103 bsp support, compile but does not run, probably due to compile/linker issue --- .../ch32v10x/boards/ch32v103r_r1_1v0/board.cmake | 8 + hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h | 20 + hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk | 7 + hw/bsp/ch32v10x/ch32v10x_conf.h | 37 ++ hw/bsp/ch32v10x/ch32v10x_it.h | 15 + hw/bsp/ch32v10x/family.c | 147 +++++ hw/bsp/ch32v10x/family.cmake | 117 ++++ hw/bsp/ch32v10x/family.mk | 53 ++ hw/bsp/ch32v10x/linker/ch32v10x.ld | 165 ++++++ hw/bsp/ch32v10x/system_ch32v10x.c | 600 +++++++++++++++++++++ hw/bsp/ch32v10x/system_ch32v10x.h | 29 + hw/bsp/ch32v10x/wch-riscv.cfg | 17 + hw/bsp/ch32v20x/family.mk | 10 +- hw/bsp/family_support.cmake | 2 +- src/common/tusb_mcu.h | 9 + src/portable/wch/ch32_usbfs_reg.h | 67 ++- src/tusb_option.h | 6 +- tools/get_deps.py | 3 + 18 files changed, 1296 insertions(+), 16 deletions(-) create mode 100644 hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake create mode 100644 hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h create mode 100644 hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk create mode 100644 hw/bsp/ch32v10x/ch32v10x_conf.h create mode 100644 hw/bsp/ch32v10x/ch32v10x_it.h create mode 100644 hw/bsp/ch32v10x/family.c create mode 100644 hw/bsp/ch32v10x/family.cmake create mode 100644 hw/bsp/ch32v10x/family.mk create mode 100644 hw/bsp/ch32v10x/linker/ch32v10x.ld create mode 100644 hw/bsp/ch32v10x/system_ch32v10x.c create mode 100644 hw/bsp/ch32v10x/system_ch32v10x.h create mode 100644 hw/bsp/ch32v10x/wch-riscv.cfg (limited to 'src/portable') diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake new file mode 100644 index 000000000..f6e47ba30 --- /dev/null +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.cmake @@ -0,0 +1,8 @@ +set(LD_FLASH_SIZE 64K) +set(LD_RAM_SIZE 20K) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CFG_EXAMPLE_MSC_DUAL_READONLY + ) +endfunction() diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h new file mode 100644 index 000000000..3b1187c3a --- /dev/null +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.h @@ -0,0 +1,20 @@ +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_PORT GPIOA +#define LED_PIN GPIO_Pin_10 +#define LED_STATE_ON 0 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_Pin_1 +#define BUTTON_STATE_ACTIVE 0 + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk new file mode 100644 index 000000000..7d7462312 --- /dev/null +++ b/hw/bsp/ch32v10x/boards/ch32v103r_r1_1v0/board.mk @@ -0,0 +1,7 @@ +MCU_VARIANT = D6 + +CFLAGS += -DCFG_EXAMPLE_MSC_DUAL_READONLY + +LDFLAGS += \ + -Wl,--defsym=__flash_size=64K \ + -Wl,--defsym=__ram_size=20K \ diff --git a/hw/bsp/ch32v10x/ch32v10x_conf.h b/hw/bsp/ch32v10x/ch32v10x_conf.h new file mode 100644 index 000000000..939c0fbde --- /dev/null +++ b/hw/bsp/ch32v10x/ch32v10x_conf.h @@ -0,0 +1,37 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v10x_conf.h + * Author : WCH + * Version : V1.0.0 + * Date : 2020/04/30 + * Description : Library configuration file. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V10x_CONF_H +#define __CH32V10x_CONF_H + +#include "ch32v10x_adc.h" +#include "ch32v10x_bkp.h" +#include "ch32v10x_crc.h" +#include "ch32v10x_dbgmcu.h" +#include "ch32v10x_dma.h" +#include "ch32v10x_exti.h" +#include "ch32v10x_flash.h" +#include "ch32v10x_gpio.h" +#include "ch32v10x_i2c.h" +#include "ch32v10x_iwdg.h" +#include "ch32v10x_pwr.h" +#include "ch32v10x_rcc.h" +#include "ch32v10x_rtc.h" +#include "ch32v10x_spi.h" +#include "ch32v10x_tim.h" +#include "ch32v10x_usart.h" +#include "ch32v10x_wwdg.h" +#include "ch32v10x_usb.h" +#include "ch32v10x_usb_host.h" +#include "ch32v10x_it.h" +#include "ch32v10x_misc.h" + +#endif /* __CH32V10x_CONF_H */ diff --git a/hw/bsp/ch32v10x/ch32v10x_it.h b/hw/bsp/ch32v10x/ch32v10x_it.h new file mode 100644 index 000000000..13afc2412 --- /dev/null +++ b/hw/bsp/ch32v10x/ch32v10x_it.h @@ -0,0 +1,15 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : ch32v10x_it.h + * Author : WCH + * Version : V1.0.0 + * Date : 2022/08/20 + * Description : This file contains the headers of the interrupt handlers. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __CH32V10x_IT_H +#define __CH32V10x_IT_H + +#endif /* __CH32V10x_IT_H */ diff --git a/hw/bsp/ch32v10x/family.c b/hw/bsp/ch32v10x/family.c new file mode 100644 index 000000000..6de17521e --- /dev/null +++ b/hw/bsp/ch32v10x/family.c @@ -0,0 +1,147 @@ +#include + +// https://github.com/openwch/ch32v307/pull/90 +// https://github.com/openwch/ch32v20x/pull/12 +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#endif + +#include "ch32v10x.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + +__attribute__((interrupt)) __attribute__((used)) +void USBHD_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +__attribute__((interrupt)) __attribute__((used)) +void USBHDWakeUp_IRQHandler(void) { + #if CFG_TUD_WCH_USBIP_USBFS + tud_int_handler(0); + #endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +__attribute__((interrupt)) __attribute__((used)) +void SysTick_Handler(void) { + SysTick->CNTL0 = SysTick->CNTL1 = SysTick->CNTL2 = SysTick->CNTL3 = 0; + SysTick->CNTH0 = SysTick->CNTH1 = SysTick->CNTH2 = SysTick->CNTH3 = 0; + system_ticks++; +} + +uint32_t SysTick_Config(uint32_t ticks) { + NVIC_EnableIRQ(SysTicK_IRQn); + SysTick->CTLR = 0; + SysTick->CNTL0 = SysTick->CNTL1 = SysTick->CNTL2 = SysTick->CNTL3 = 0; + SysTick->CNTH0 = SysTick->CNTH1 = SysTick->CNTH2 = SysTick->CNTH3 = 0; + + SysTick->CMPLR0 = (u8)(ticks & 0xFF); + SysTick->CMPLR1 = (u8)(ticks >> 8); + SysTick->CMPLR2 = (u8)(ticks >> 16); + SysTick->CMPLR3 = (u8)(ticks >> 24); + + SysTick->CMPHR0 = SysTick->CMPHR1 = SysTick->CMPHR2 = SysTick->CMPHR3 = 0; + SysTick->CTLR = 1; + return 0; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void board_init(void) { + __disable_irq(); + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(SystemCoreClock / 1000); +#endif + + uint8_t usb_div; + switch (SystemCoreClock) { + case 48000000: usb_div = RCC_USBCLKSource_PLLCLK_Div1; break; + case 72000000: usb_div = RCC_USBCLKSource_PLLCLK_1Div5; break; + default: TU_ASSERT(0,); break; + } + RCC_USBCLKConfig(usb_div); + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); + + #ifdef LED_PIN + GPIO_InitTypeDef led_init = { + .GPIO_Pin = LED_PIN, + .GPIO_Mode = GPIO_Mode_Out_OD, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(LED_PORT, &led_init); + #endif + + #ifdef BUTTON_PIN + GPIO_InitTypeDef button_init = { + .GPIO_Pin = BUTTON_PIN, + .GPIO_Mode = GPIO_Mode_IPU, + .GPIO_Speed = GPIO_Speed_50MHz, + }; + GPIO_Init(BUTTON_PORT, &button_init); + #endif + + // UART TX is PA9 + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE); + GPIO_InitTypeDef usart_init = { + .GPIO_Pin = GPIO_Pin_9, + .GPIO_Speed = GPIO_Speed_50MHz, + .GPIO_Mode = GPIO_Mode_AF_PP, + }; + GPIO_Init(GPIOA, &usart_init); + + USART_InitTypeDef usart = { + .USART_BaudRate = 115200, + .USART_WordLength = USART_WordLength_8b, + .USART_StopBits = USART_StopBits_1, + .USART_Parity = USART_Parity_No, + .USART_Mode = USART_Mode_Tx, + .USART_HardwareFlowControl = USART_HardwareFlowControl_None, + }; + USART_Init(USART1, &usart); + USART_Cmd(USART1, ENABLE); + + __enable_irq(); + + board_led_write(true); +} + +void board_led_write(bool state) { + GPIO_WriteBit(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == GPIO_ReadInputDataBit(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + const char *bufc = (const char *) buf; + for (int i = 0; i < len; i++) { + while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET); + USART_SendData(USART1, *bufc++); + } + + return len; +} diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake new file mode 100644 index 000000000..b0d8241d3 --- /dev/null +++ b/hw/bsp/ch32v10x/family.cmake @@ -0,0 +1,117 @@ +include_guard() + +#set(UF2_FAMILY_ID 0x699b62ec) +set(CH32_FAMILY ch32v10x) +set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v103) +set(SDK_SRC_DIR ${SDK_DIR}/EVT/EXAM/SRC) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CH32V103 CACHE INTERNAL "") +set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${CH32_FAMILY}.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_SRC_DIR}/Startup/startup_${CH32_FAMILY}.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_SRC_DIR}/Core/core_riscv.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_gpio.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_misc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_rcc.c + ${SDK_SRC_DIR}/Peripheral/src/${CH32_FAMILY}_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_${CH32_FAMILY}.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_SRC_DIR}/Core + ${SDK_SRC_DIR}/Peripheral/inc + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -mcmodel=medany + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -Wl,--defsym=__flash_size=${LD_FLASH_SIZE} + -Wl,--defsym=__ram_size=${LD_RAM_SIZE} + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_CH32V103 ${RTOS}) + + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/wch/dcd_ch32_usbfs.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd_wch(${TARGET}) + + #family_add_uf2(${TARGET} ${UF2_FAMILY_ID}) + #family_flash_uf2(${TARGET} ${UF2_FAMILY_ID}) +endfunction() diff --git a/hw/bsp/ch32v10x/family.mk b/hw/bsp/ch32v10x/family.mk new file mode 100644 index 000000000..d96d5012e --- /dev/null +++ b/hw/bsp/ch32v10x/family.mk @@ -0,0 +1,53 @@ +# https://www.embecosm.com/resources/tool-chain-downloads/#riscv-stable +#CROSS_COMPILE ?= riscv32-unknown-elf- + +# Toolchain from https://nucleisys.com/download.php +#CROSS_COMPILE ?= riscv-nuclei-elf- + +# Toolchain from https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack +CROSS_COMPILE ?= riscv-none-elf- + +CH32_FAMILY = ch32v10x +SDK_DIR = hw/mcu/wch/ch32v103 +SDK_SRC_DIR = $(SDK_DIR)/EVT/EXAM/SRC + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= rv32imac-ilp32 + +# Port0 use FSDev, Port1 use USBFS +PORT ?= 0 + +CFLAGS += \ + -mcmodel=medany \ + -ffat-lto-objects \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_CH32V103 + +# https://github.com/openwch/ch32v20x/pull/12 +CFLAGS += -Wno-error=strict-prototypes + +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs \ + +LD_FILE = $(FAMILY_PATH)/linker/${CH32_FAMILY}.ld + +SRC_C += \ + src/portable/wch/dcd_ch32_usbfs.c \ + $(SDK_SRC_DIR)/Core/core_riscv.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_rcc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_usart.c \ + +SRC_S += $(SDK_SRC_DIR)/Startup/startup_${CH32_FAMILY}.S + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/$(SDK_SRC_DIR)/Core \ + $(TOP)/$(SDK_SRC_DIR)/Peripheral/inc \ + +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V + +OPENOCD_WCH_OPTION=-f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg +flash: flash-openocd-wch diff --git a/hw/bsp/ch32v10x/linker/ch32v10x.ld b/hw/bsp/ch32v10x/linker/ch32v10x.ld new file mode 100644 index 000000000..cd5c8dc17 --- /dev/null +++ b/hw/bsp/ch32v10x/linker/ch32v10x.ld @@ -0,0 +1,165 @@ +/* Define default values if not already defined */ +__FLASH_SIZE = DEFINED(__flash_size) ? __flash_size : 64K; +__RAM_SIZE = DEFINED(__ram_size) ? __ram_size : 20K; + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = __FLASH_SIZE + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = __RAM_SIZE +} + +ENTRY( _start ) + +__stack_size = 2048; + +PROVIDE( _stack_size = __stack_size ); + +SECTIONS +{ + .init : + { + _sinit = .; + . = ALIGN(4); + KEEP(*(SORT_NONE(.init))) + . = ALIGN(4); + _einit = .; + } >FLASH AT>FLASH + + .vector : + { + *(.vector); + . = ALIGN(64); + } >FLASH AT>FLASH + + .text : + { + . = ALIGN(4); + *(.text) + *(.text.*) + *(.rodata) + *(.rodata*) + *(.gnu.linkonce.t.*) + . = ALIGN(4); + } >FLASH AT>FLASH + + .fini : + { + KEEP(*(SORT_NONE(.fini))) + . = ALIGN(4); + } >FLASH AT>FLASH + + PROVIDE( _etext = . ); + PROVIDE( _eitcm = . ); + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH AT>FLASH + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) + KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH AT>FLASH + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) + KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH AT>FLASH + + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } >FLASH AT>FLASH + + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } >FLASH AT>FLASH + + .dalign : + { + . = ALIGN(4); + PROVIDE(_data_vma = .); + } >RAM AT>FLASH + + .dlalign : + { + . = ALIGN(4); + PROVIDE(_data_lma = .); + } >FLASH AT>FLASH + + .data : + { + *(.gnu.linkonce.r.*) + *(.data .data.*) + *(.gnu.linkonce.d.*) + . = ALIGN(8); + PROVIDE( __global_pointer$ = . + 0x800 ); + *(.sdata .sdata.*) + *(.sdata2.*) + *(.gnu.linkonce.s.*) + . = ALIGN(8); + *(.srodata.cst16) + *(.srodata.cst8) + *(.srodata.cst4) + *(.srodata.cst2) + *(.srodata .srodata.*) + . = ALIGN(4); + PROVIDE( _edata = .); + } >RAM AT>FLASH + + .bss : + { + . = ALIGN(4); + PROVIDE( _sbss = .); + *(.sbss*) + *(.gnu.linkonce.sb.*) + *(.bss*) + *(.gnu.linkonce.b.*) + *(COMMON*) + . = ALIGN(4); + PROVIDE( _ebss = .); + } >RAM AT>FLASH + + PROVIDE( _end = _ebss); + PROVIDE( end = . ); + + .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : + { + PROVIDE( _heap_end = . ); + . = ALIGN(4); + PROVIDE(_susrstack = . ); + . = . + __stack_size; + PROVIDE( _eusrstack = .); + } >RAM + +} diff --git a/hw/bsp/ch32v10x/system_ch32v10x.c b/hw/bsp/ch32v10x/system_ch32v10x.c new file mode 100644 index 000000000..b083b83b4 --- /dev/null +++ b/hw/bsp/ch32v10x/system_ch32v10x.c @@ -0,0 +1,600 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v10x.c + * Author : WCH + * Version : V1.0.0 + * Date : 2020/04/30 + * Description : CH32V10x Device Peripheral Access Layer System Source File. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#include "ch32v10x.h" + +/* + * Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after + * reset the HSI is used as SYSCLK source). + * If none of the define below is enabled, the HSI is used as System clock source. + */ +//#define SYSCLK_FREQ_HSE HSE_VALUE +//#define SYSCLK_FREQ_48MHz_HSE 48000000 +//#define SYSCLK_FREQ_56MHz_HSE 56000000 +#define SYSCLK_FREQ_72MHz_HSE 72000000 +//#define SYSCLK_FREQ_HSI HSI_VALUE +//#define SYSCLK_FREQ_48MHz_HSI 48000000 +//#define SYSCLK_FREQ_56MHz_HSI 56000000 +//#define SYSCLK_FREQ_72MHz_HSI 72000000 + +/* Clock Definitions */ +#ifdef SYSCLK_FREQ_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSE +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSE; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz_HSI; /* System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz_HSI +uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz_HSI; /* System Clock Frequency (Core Clock) */ +#else +uint32_t SystemCoreClock = HSI_VALUE; /* System Clock Frequency (Core Clock) */ + +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/* ch32v10x_system_private_function_proto_types */ +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE +static void SetSysClockToHSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSE +static void SetSysClockTo48_HSE( void ); +#elif defined SYSCLK_FREQ_56MHz_HSE +static void SetSysClockTo56_HSE( void ); +#elif defined SYSCLK_FREQ_72MHz_HSE +static void SetSysClockTo72_HSE( void ); +#elif defined SYSCLK_FREQ_48MHz_HSI +static void SetSysClockTo48_HSI( void ); +#elif defined SYSCLK_FREQ_56MHz_HSI +static void SetSysClockTo56_HSI( void ); +#elif defined SYSCLK_FREQ_72MHz_HSI +static void SetSysClockTo72_HSI( void ); + +#endif + +/********************************************************************* + * @fn SystemInit + * + * @brief Setup the microcontroller system Initialize the Embedded Flash Interface, + * the PLL and update the SystemCoreClock variable. + * + * @return none + */ +void SystemInit(void) +{ + RCC->CTLR |= (uint32_t)0x00000001; + RCC->CFGR0 &= (uint32_t)0xF8FF0000; + RCC->CTLR &= (uint32_t)0xFEF6FFFF; + RCC->CTLR &= (uint32_t)0xFFFBFFFF; + RCC->CFGR0 &= (uint32_t)0xFF80FFFF; + RCC->INTR = 0x009F0000; + SetSysClock(); +} + +/********************************************************************* + * @fn SystemCoreClockUpdate + * + * @brief Update SystemCoreClock variable according to Clock Register Values. + * + * @return none + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + + tmp = RCC->CFGR0 & RCC_SWS; + + switch(tmp) + { + case 0x00: + SystemCoreClock = HSI_VALUE; + break; + case 0x04: + SystemCoreClock = HSE_VALUE; + break; + case 0x08: + pllmull = RCC->CFGR0 & RCC_PLLMULL; + pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllmull = (pllmull >> 18) + 2; + if(pllsource == 0x00) + { + if( EXTEN->EXTEN_CTR & EXTEN_PLL_HSI_PRE ) + { + SystemCoreClock = ( HSI_VALUE ) * pllmull; + } + else + { + SystemCoreClock = ( HSI_VALUE >> 1 ) * pllmull; + } + } + else + { + if((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) + { + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + } + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; + SystemCoreClock >>= tmp; +} + +/********************************************************************* + * @fn SetSysClock + * + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClock(void) +{ + //GPIO_IPD_Unused(); +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_48MHz_HSE + SetSysClockTo48_HSE(); +#elif defined SYSCLK_FREQ_56MHz_HSE + SetSysClockTo56_HSE(); +#elif defined SYSCLK_FREQ_72MHz_HSE + SetSysClockTo72_HSE(); +#elif defined SYSCLK_FREQ_48MHz_HSI + SetSysClockTo48_HSI(); +#elif defined SYSCLK_FREQ_56MHz_HSI + SetSysClockTo56_HSI(); +#elif defined SYSCLK_FREQ_72MHz_HSI + SetSysClockTo72_HSI(); + +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + * source (default after reset) + */ +} + +#ifdef SYSCLK_FREQ_HSE + +/********************************************************************* + * @fn SetSysClockToHSE + * + * @brief Sets HSE as System clock source and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + /* Flash 0 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_0; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) + { + } + } + else + { + /* If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + + +#elif defined SYSCLK_FREQ_48MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo48_HSE + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo56_HSE + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLMULL7); + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSE + +/********************************************************************* + * @fn SetSysClockTo72_HSE + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + RCC->CTLR |= ((uint32_t)RCC_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CTLR & RCC_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if((RCC->CTLR & RCC_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if(HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | + RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSE | RCC_PLLMULL9); + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } + } + else + { + /* + * If HSE fails to start-up, the application will have wrong clock + * configuration. User can add here some code to deal with this error + */ + } +} + +#elif defined SYSCLK_FREQ_48MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo48_HSI + * + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo48_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 6 = 48 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL6); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_56MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo56_HSI + * + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo56_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 7 = 56 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL7); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#elif defined SYSCLK_FREQ_72MHz_HSI + +/********************************************************************* + * @fn SetSysClockTo72_HSI + * + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 and PCLK1 prescalers. + * + * @return none + */ +static void SetSysClockTo72_HSI(void) +{ + EXTEN->EXTEN_CTR |= EXTEN_PLL_HSI_PRE; + + /* Enable Prefetch Buffer */ + FLASH->ACTLR |= FLASH_ACTLR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACTLR &= (uint32_t)((uint32_t)~FLASH_ACTLR_LATENCY); + FLASH->ACTLR |= (uint32_t)FLASH_ACTLR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + /* PCLK2 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + /* PCLK1 = HCLK */ + RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSI * 9 = 72 MHz */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); + RCC->CFGR0 |= (uint32_t)(RCC_PLLSRC_HSI_Div2 | RCC_PLLMULL9); + + /* Enable PLL */ + RCC->CTLR |= RCC_PLLON; + /* Wait till PLL is ready */ + while((RCC->CTLR & RCC_PLLRDY) == 0) + { + } + /* Select PLL as system clock source */ + RCC->CFGR0 &= (uint32_t)((uint32_t) ~(RCC_SW)); + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + /* Wait till PLL is used as system clock source */ + while((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) + { + } +} + +#endif diff --git a/hw/bsp/ch32v10x/system_ch32v10x.h b/hw/bsp/ch32v10x/system_ch32v10x.h new file mode 100644 index 000000000..d15624520 --- /dev/null +++ b/hw/bsp/ch32v10x/system_ch32v10x.h @@ -0,0 +1,29 @@ +/********************************** (C) COPYRIGHT ******************************* + * File Name : system_ch32v10x.h + * Author : WCH + * Version : V1.0.0 + * Date : 2020/04/30 + * Description : CH32V10x Device Peripheral Access Layer System Header File. +********************************************************************************* +* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. +* Attention: This software (modified or not) and binary are used for +* microcontroller manufactured by Nanjing Qinheng Microelectronics. +*******************************************************************************/ +#ifndef __SYSTEM_CH32V10x_H +#define __SYSTEM_CH32V10x_H + +#ifdef __cplusplus +extern "C" { +#endif + +extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ + +/* System_Exported_Functions */ +extern void SystemInit(void); +extern void SystemCoreClockUpdate(void); + +#ifdef __cplusplus +} +#endif + +#endif /*__CH32V10x_SYSTEM_H */ diff --git a/hw/bsp/ch32v10x/wch-riscv.cfg b/hw/bsp/ch32v10x/wch-riscv.cfg new file mode 100644 index 000000000..aa35aa9c5 --- /dev/null +++ b/hw/bsp/ch32v10x/wch-riscv.cfg @@ -0,0 +1,17 @@ +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index daf3148f8..4485091dc 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -45,12 +45,12 @@ SRC_C += \ src/portable/wch/dcd_ch32_usbfs.c \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ $(SDK_SRC_DIR)/Core/core_riscv.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_gpio.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_misc.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_rcc.c \ - $(SDK_SRC_DIR)/Peripheral/src/ch32v20x_usart.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_rcc.c \ + $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_usart.c \ -SRC_S += $(SDK_SRC_DIR)/Startup/startup_ch32v20x_${MCU_VARIANT}.S +SRC_S += $(SDK_SRC_DIR)/Startup/startup_${CH32_FAMILY}_${MCU_VARIANT}.S INC += \ $(TOP)/$(BOARD_PATH) \ diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d9443f811..94d55f04a 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -443,7 +443,7 @@ function(family_flash_openocd TARGET) # note skip verify since it has issue with rp2040 add_custom_target(${TARGET}-openocd DEPENDS ${TARGET} - COMMAND ${OPENOCD} ${OPTION_LIST} -c "program $ reset" ${OPTION_LIST2} -c exit + COMMAND ${OPENOCD} ${OPTION_LIST} -c init -c halt -c "program $ reset" ${OPTION_LIST2} -c exit VERBATIM ) endfunction() diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index c66996c4f..d9d11e96d 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -420,6 +420,15 @@ #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) +#elif TU_CHECK_MCU(OPT_MCU_CH32V103) + #define TUP_USBIP_WCH_USBFS + + #if !defined(CFG_TUD_WCH_USBIP_USBFS) + #define CFG_TUD_WCH_USBIP_USBFS 1 + #endif + + #define TUP_DCD_ENDPOINT_MAX 8 + #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) // v20x support both FSDEV (USBD) and USBFS, default to FSDEV #define TUP_USBIP_WCH_USBFS diff --git a/src/portable/wch/ch32_usbfs_reg.h b/src/portable/wch/ch32_usbfs_reg.h index ef6ebf2dc..68be64f5e 100644 --- a/src/portable/wch/ch32_usbfs_reg.h +++ b/src/portable/wch/ch32_usbfs_reg.h @@ -35,15 +35,68 @@ #pragma GCC diagnostic ignored "-Wstrict-prototypes" #endif -#if CFG_TUSB_MCU == OPT_MCU_CH32V307 - #include - #define USBHD_IRQn OTG_FS_IRQn - +#if CFG_TUSB_MCU == OPT_MCU_CH32F20X + #include +#elif CFG_TUSB_MCU == OPT_MCU_CH32V103 + #include + typedef struct + { + __IO uint8_t BASE_CTRL; + __IO uint8_t UDEV_CTRL; + __IO uint8_t INT_EN; + __IO uint8_t DEV_ADDR; + __IO uint8_t Reserve0; + __IO uint8_t MIS_ST; + __IO uint8_t INT_FG; + __IO uint8_t INT_ST; + __IO uint32_t RX_LEN; + __IO uint8_t UEP4_1_MOD; + __IO uint8_t UEP2_3_MOD; + __IO uint8_t UEP5_6_MOD; + __IO uint8_t UEP7_MOD; + __IO uint32_t UEP0_DMA; + __IO uint32_t UEP1_DMA; + __IO uint32_t UEP2_DMA; + __IO uint32_t UEP3_DMA; + __IO uint32_t UEP4_DMA; + __IO uint32_t UEP5_DMA; + __IO uint32_t UEP6_DMA; + __IO uint32_t UEP7_DMA; + __IO uint16_t UEP0_TX_LEN; + __IO uint8_t UEP0_TX_CTRL; + __IO uint8_t UEP0_RX_CTRL; + __IO uint16_t UEP1_TX_LEN; + __IO uint8_t UEP1_TX_CTRL; + __IO uint8_t UEP1_RX_CTRL; + __IO uint16_t UEP2_TX_LEN; + __IO uint8_t UEP2_TX_CTRL; + __IO uint8_t UEP2_RX_CTRL; + __IO uint16_t UEP3_TX_LEN; + __IO uint8_t UEP3_TX_CTRL; + __IO uint8_t UEP3_RX_CTRL; + __IO uint16_t UEP4_TX_LEN; + __IO uint8_t UEP4_TX_CTRL; + __IO uint8_t UEP4_RX_CTRL; + __IO uint16_t UEP5_TX_LEN; + __IO uint8_t UEP5_TX_CTRL; + __IO uint8_t UEP5_RX_CTRL; + __IO uint16_t UEP6_TX_LEN; + __IO uint8_t UEP6_TX_CTRL; + __IO uint8_t UEP6_RX_CTRL; + __IO uint16_t UEP7_TX_LEN; + __IO uint8_t UEP7_TX_CTRL; + __IO uint8_t UEP7_RX_CTRL; + __IO uint32_t Reserve1; + __IO uint32_t OTG_CR; + __IO uint32_t OTG_SR; + } USBOTG_FS_TypeDef; + + #define USBOTG_FS ((USBOTG_FS_TypeDef *) 0x40023400) #elif CFG_TUSB_MCU == OPT_MCU_CH32V20X #include - -#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X - #include +#elif CFG_TUSB_MCU == OPT_MCU_CH32V307 + #include + #define USBHD_IRQn OTG_FS_IRQn #endif #ifdef __GNUC__ diff --git a/src/tusb_option.h b/src/tusb_option.h index db8b94580..1ca09e902 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_OPTION_H_ -#define _TUSB_OPTION_H_ +#ifndef TUSB_OPTION_H_ +#define TUSB_OPTION_H_ #include "common/tusb_compiler.h" @@ -182,7 +182,7 @@ #define OPT_MCU_CH32V307 2200 ///< WCH CH32V307 #define OPT_MCU_CH32F20X 2210 ///< WCH CH32F20x #define OPT_MCU_CH32V20X 2220 ///< WCH CH32V20X - +#define OPT_MCU_CH32V103 2230 ///< WCH CH32V103 // NXP LPC MCX #define OPT_MCU_MCXN9 2300 ///< NXP MCX N9 Series diff --git a/tools/get_deps.py b/tools/get_deps.py index 50cc5c893..92bfb86a2 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -168,6 +168,9 @@ deps_optional = { 'hw/mcu/ti': ['https://github.com/hathach/ti_driver.git', '143ed6cc20a7615d042b03b21e070197d473e6e5', 'msp430 msp432e4 tm4c'], + 'hw/mcu/wch/ch32v103': ['https://github.com/openwch/ch32v103.git', + '7578cae0b21f86dd053a1f781b2fc6ab99d0ec17', + 'ch32v10x'], 'hw/mcu/wch/ch32v20x': ['https://github.com/openwch/ch32v20x.git', 'de6d68c654340d7f27b00cebbfc9aa2740a1abc2', 'ch32v20x'], -- cgit v1.3.1 From 9ae00535737f6f442a9ca7ad3167f686c0d557b1 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 14 Jun 2024 16:08:26 +0700 Subject: newline --- src/portable/st/stm32_fsdev/fsdev_ch32.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h index dbf2a0289..f63a80d56 100644 --- a/src/portable/st/stm32_fsdev/fsdev_ch32.h +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -43,10 +43,10 @@ #pragma GCC diagnostic ignored "-Wstrict-prototypes" #endif -#if CFG_TUSB_MCU == OPT_MCU_CH32V20X - #include -#elif CFG_TUSB_MCU == OPT_MCU_CH32F20X +#if CFG_TUSB_MCU == OPT_MCU_CH32F20X #include +#elif CFG_TUSB_MCU == OPT_MCU_CH32V20X + #include #endif #ifdef __GNUC__ -- cgit v1.3.1 From 00062ddb0cda4e46750c7df09aa31026cc03b5ee Mon Sep 17 00:00:00 2001 From: Okarss <104319900+Okarss@users.noreply.github.com> Date: Fri, 14 Jun 2024 18:16:09 +0300 Subject: [STM32 FSDEV] Simplify toggle bit logic --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 12 ++++++------ src/portable/st/stm32_fsdev/fsdev_common.h | 24 ++---------------------- 2 files changed, 8 insertions(+), 28 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 9ce37f992..b5b89c577 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -215,20 +215,20 @@ void dcd_init(uint8_t rhport) /* The RM mentions to use a special ordering of PDWN and FRES, but this isn't done in HAL. * Here, the RM is followed. */ - for (uint32_t i = 0; i < 200; i++) { // should be a few us - asm("NOP"); + for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us + __DSB(); } // Perform USB peripheral reset USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; - for (uint32_t i = 0; i < 200; i++) { // should be a few us - asm("NOP"); + for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us + __DSB(); } USB->CNTR &= ~USB_CNTR_PDWN; // Wait startup time, for F042 and F070, this is <= 1 us. - for (uint32_t i = 0; i < 200; i++) { // should be a few us - asm("NOP"); + for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us + __DSB(); } USB->CNTR = 0; // Enable USB diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index af5d8afab..e8a6af8cb 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -295,18 +295,7 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, u TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); regVal &= USB_EPTX_DTOGMASK; - - /* toggle first bit ? */ - if((USB_EPTX_DTOG1 & (wState))!= 0U) - { - regVal ^= USB_EPTX_DTOG1; - } - /* toggle second bit ? */ - if((USB_EPTX_DTOG2 & ((uint32_t)(wState)))!= 0U) - { - regVal ^= USB_EPTX_DTOG2; - } - + regVal ^= wState; regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; pcd_set_endpoint(USBx, bEpIdx, regVal); } @@ -322,16 +311,7 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_status(USB_TypeDef * USBx TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); regVal &= USB_EPRX_DTOGMASK; - - /* toggle first bit ? */ - if((USB_EPRX_DTOG1 & wState)!= 0U) { - regVal ^= USB_EPRX_DTOG1; - } - /* toggle second bit ? */ - if((USB_EPRX_DTOG2 & wState)!= 0U) { - regVal ^= USB_EPRX_DTOG2; - } - + regVal ^= wState; regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; pcd_set_endpoint(USBx, bEpIdx, regVal); } -- cgit v1.3.1 From fb6a6acbff81a98e37b86a0dc3370d4076bb356c Mon Sep 17 00:00:00 2001 From: Okarss <104319900+Okarss@users.noreply.github.com> Date: Fri, 14 Jun 2024 18:39:48 +0300 Subject: Revert the DSB because of RISC-V --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index b5b89c577..4e31c99fa 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -216,19 +216,19 @@ void dcd_init(uint8_t rhport) * Here, the RM is followed. */ for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us - __DSB(); + asm("NOP"); } // Perform USB peripheral reset USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us - __DSB(); + asm("NOP"); } USB->CNTR &= ~USB_CNTR_PDWN; // Wait startup time, for F042 and F070, this is <= 1 us. for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us - __DSB(); + asm("NOP"); } USB->CNTR = 0; // Enable USB -- cgit v1.3.1 From 5f060a357d34257f5a742ebf78c5e4e0873c7a13 Mon Sep 17 00:00:00 2001 From: Okarss <104319900+Okarss@users.noreply.github.com> Date: Fri, 14 Jun 2024 21:23:17 +0300 Subject: Update the STM32 documentation --- README.rst | 5 +++-- docs/reference/supported.rst | 20 +++++++++++++++++--- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 10 ++++++++-- src/portable/st/stm32_fsdev/fsdev_stm32.h | 2 +- 4 files changed, 29 insertions(+), 8 deletions(-) (limited to 'src/portable') diff --git a/README.rst b/README.rst index b5f9fc149..1ae8c5375 100644 --- a/README.rst +++ b/README.rst @@ -151,8 +151,9 @@ Following CPUs are supported, check out `Supported Devices`_ for comprehensive l +--------------+------------------------------------------------------------+ | Sony | CXD56 | +--------------+------------------------------------------------------------+ -| ST STM32 | F0, F1, F2, F3, F4, F7, H5, H7, G0, G4, L0, L1, L4, L4+, | -| | U5, WB | +| ST STM32 | F0, F1, F2, F3, F4, F7, G0, G4, H5, H7, | +| | | +| | L0, L1, L4, L4+, L5, U5, WB | +--------------+------------------------------------------------------------+ | TI | MSP430, MSP432E4, TM4C123 | +--------------+------------------------------------------------------------+ diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index 3ca203e88..d0e0bf1af 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -104,11 +104,17 @@ Supported MCUs | +-----------------------+--------+------+-----------+-------------------+--------------+ | | F7 | ✔ | | ✔ | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | H7 | ✔ | | ✔ | dwc2 | | +| | G0 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | L0, L1 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | H5 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | H7 | ✔ | | ✔ | dwc2 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | L0 | ✔ | ✖ | ✖ | stm32_fsdev | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ +| | L1 | ✔ | ✖ | ✖ | stm32_fsdev | | | +----+------------------+--------+------+-----------+-------------------+--------------+ | | L4 | 4x2, 4x3 | ✔ | ✖ | ✖ | stm32_fsdev | | | | +------------------+--------+------+-----------+-------------------+--------------+ @@ -116,8 +122,14 @@ Supported MCUs | +----+------------------+--------+------+-----------+-------------------+--------------+ | | L4+ | ✔ | | | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | U5 | ✔ | | ✔ | dwc2 | | +| | L5 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------+--------+------+-----------+-------------------+--------------+ +| | U5 | 535, 545 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | +------------------+--------+------+-----------+-------------------+--------------+ +| | | 575, 585 | ✔ | | ✖ | dwc2 | | +| | +------------------+--------+------+-----------+-------------------+--------------+ +| | | 59x,5Ax,5Fx,5Gx | ✔ | | ✔ | dwc2 | | +| +----+------------------+--------+------+-----------+-------------------+--------------+ | | WBx5 | ✔ | | | stm32_fsdev | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | @@ -129,7 +141,9 @@ Supported MCUs | ValentyUSB | eptri | ✔ | ✖ | ✖ | eptri | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | WCH | CH32F20x | ✔ | | ✔ | ch32f205 | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ | | CH32V20x | ✔ | | ✖ | ch32v20x | | +| +-----------------------+--------+------+-----------+-------------------+--------------+ | | CH32V307 | ✔ | | ✔ | ch32v307 | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 9ce37f992..0ecb6ea05 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -37,14 +37,20 @@ * It also should work with minimal changes for any ST MCU with an "USB A"/"PCD"/"HCD" peripheral. This * covers: * - * F04x, F072, F078, 070x6/B 1024 byte buffer + * F04x, F072, F078, F070x6/B 1024 byte buffer * F102, F103 512 byte buffer; no internal D+ pull-up (maybe many more changes?) * F302xB/C, F303xB/C, F373 512 byte buffer; no internal D+ pull-up * F302x6/8, F302xD/E2, F303xD/E 1024 byte buffer; no internal D+ pull-up + * G0 2048 byte buffer; 32-bit bus + * G4 1024 byte buffer + * H5 2048 byte buffer; 32-bit bus * L0x2, L0x3 1024 byte buffer * L1 512 byte buffer * L4x2, L4x3 1024 byte buffer - * G0 2048 byte buffer + * L5 1024 byte buffer + * U0 1024 byte buffer; 32-bit bus + * U535, U545 2048 byte buffer; 32-bit bus + * WB35, WB55 1024 byte buffer * * To use this driver, you must: * - If you are using a device with crystal-less USB, set up the clock recovery system (CRS) diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index b3fa11b88..524efc75f 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -161,7 +161,7 @@ #else #error You are using an untested or unimplemented STM32 variant. Please update the driver. - // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4 + // This includes U0 #endif // This checks if the device has "LPM" -- cgit v1.3.1 From d945261aef7e2c922153e2a85d00791dd1930740 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 18 Jun 2024 12:53:02 +0700 Subject: LOG3 in isr --- examples/host/device_info/src/tusb_config.h | 2 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 4 ++-- src/portable/nxp/khci/dcd_khci.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'src/portable') diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 484f651b1..2e9731eaf 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -70,7 +70,7 @@ #define CFG_TUH_ENABLED 1 #if CFG_TUSB_MCU == OPT_MCU_RP2040 - #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller + // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index abce35245..1cc5c1836 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -907,9 +907,9 @@ void tusb_hal_nrf_power_event(uint32_t event) { USB_EVT_READY = 2 }; -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= 3 const char* const power_evt_str[] = {"Detected", "Removed", "Ready"}; - TU_LOG(2, "Power USB event: %s\r\n", power_evt_str[event]); + TU_LOG(3, "Power USB event: %s\r\n", power_evt_str[event]); #endif switch (event) { diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index dc71117b3..ef61146aa 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -540,7 +540,7 @@ void dcd_int_handler(uint8_t rhport) } if (is & USB_ISTAT_SLEEP_MASK) { - // TU_LOG2("Suspend: "); TU_LOG2_HEX(is); + // TU_LOG3("Suspend: "); TU_LOG2_HEX(is); // Note Host usually has extra delay after bus reset (without SOF), which could falsely // detected as Sleep event. Though usbd has debouncing logic so we are good -- cgit v1.3.1 From 5083d1eb3399d605d64b3e30a784731f330e7774 Mon Sep 17 00:00:00 2001 From: Okarss <104319900+Okarss@users.noreply.github.com> Date: Tue, 18 Jun 2024 12:12:44 +0300 Subject: Update Host mode information for FSDEV devices --- docs/reference/supported.rst | 13 +++++++------ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 6 +++--- 2 files changed, 10 insertions(+), 9 deletions(-) (limited to 'src/portable') diff --git a/docs/reference/supported.rst b/docs/reference/supported.rst index d0e0bf1af..441c885ac 100644 --- a/docs/reference/supported.rst +++ b/docs/reference/supported.rst @@ -104,11 +104,11 @@ Supported MCUs | +-----------------------+--------+------+-----------+-------------------+--------------+ | | F7 | ✔ | | ✔ | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | G0 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | G0 | ✔ | | ✖ | stm32_fsdev | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | G4 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | H5 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | H5 | ✔ | | ✖ | stm32_fsdev | | | +-----------------------+--------+------+-----------+-------------------+--------------+ | | H7 | ✔ | | ✔ | dwc2 | | | +-----------------------+--------+------+-----------+-------------------+--------------+ @@ -124,13 +124,13 @@ Supported MCUs | +-----------------------+--------+------+-----------+-------------------+--------------+ | | L5 | ✔ | ✖ | ✖ | stm32_fsdev | | | +-----------------------+--------+------+-----------+-------------------+--------------+ -| | U5 | 535, 545 | ✔ | ✖ | ✖ | stm32_fsdev | | +| | U5 | 535, 545 | ✔ | | ✖ | stm32_fsdev | | | | +------------------+--------+------+-----------+-------------------+--------------+ | | | 575, 585 | ✔ | | ✖ | dwc2 | | | | +------------------+--------+------+-----------+-------------------+--------------+ | | | 59x,5Ax,5Fx,5Gx | ✔ | | ✔ | dwc2 | | | +----+------------------+--------+------+-----------+-------------------+--------------+ -| | WBx5 | ✔ | | | stm32_fsdev | | +| | WBx5 | ✔ | ✖ | ✖ | stm32_fsdev | | +--------------+-----------------------+--------+------+-----------+-------------------+--------------+ | TI | MSP430 | ✔ | ✖ | ✖ | msp430x5xx | | | +-----------------------+--------+------+-----------+-------------------+--------------+ @@ -153,8 +153,9 @@ Table Legend = =================== ✔ Supported -⚠ WIP/partial support -✖ Not supported +⚠ Partial support +✖ Not supported by hardware +[empty] Unknown = =================== Supported Boards diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 0ecb6ea05..fb499fa18 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -41,15 +41,15 @@ * F102, F103 512 byte buffer; no internal D+ pull-up (maybe many more changes?) * F302xB/C, F303xB/C, F373 512 byte buffer; no internal D+ pull-up * F302x6/8, F302xD/E2, F303xD/E 1024 byte buffer; no internal D+ pull-up - * G0 2048 byte buffer; 32-bit bus + * G0 2048 byte buffer; 32-bit bus; host mode * G4 1024 byte buffer - * H5 2048 byte buffer; 32-bit bus + * H5 2048 byte buffer; 32-bit bus; host mode * L0x2, L0x3 1024 byte buffer * L1 512 byte buffer * L4x2, L4x3 1024 byte buffer * L5 1024 byte buffer * U0 1024 byte buffer; 32-bit bus - * U535, U545 2048 byte buffer; 32-bit bus + * U535, U545 2048 byte buffer; 32-bit bus; host mode * WB35, WB55 1024 byte buffer * * To use this driver, you must: -- cgit v1.3.1 From 0d79da37e79b8abd04f7f9ba9c15114d84e9810a Mon Sep 17 00:00:00 2001 From: Andrew Leech Date: Thu, 20 Jun 2024 15:15:51 +1000 Subject: synopsys/dwc2_esp32: Add header for vTaskDelay. --- src/portable/synopsys/dwc2/dwc2_esp32.h | 1 + 1 file changed, 1 insertion(+) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_esp32.h b/src/portable/synopsys/dwc2/dwc2_esp32.h index c50dd66b8..932f52f40 100644 --- a/src/portable/synopsys/dwc2/dwc2_esp32.h +++ b/src/portable/synopsys/dwc2/dwc2_esp32.h @@ -35,6 +35,7 @@ #include "esp_intr_alloc.h" #include "soc/periph_defs.h" //#include "soc/usb_periph.h" +#include "freertos/task.h" #define DWC2_REG_BASE 0x60080000UL #define DWC2_EP_MAX 6 // USB_OUT_EP_NUM. TODO ESP32Sx only has 5 tx fifo (5 endpoint IN) -- cgit v1.3.1 From 4ce1cce40a01dce56cab2c73745f4f2c9d212b25 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 12 Jul 2024 20:17:14 +0700 Subject: simplify dwc2 test mode - all dwc2 ip seems to support test mode in both fs/hs -> remove TUP_USBIP_DWC2_TEST_MODE - remove dcd_check_test_mode_support(), all should be supported - move enum tusb_feature_test_mode_t to tusb_types.h --- src/common/tusb_mcu.h | 3 -- src/common/tusb_types.h | 9 ++++++ src/device/dcd.h | 13 +------- src/device/usbd.c | 56 +++++++++++------------------------ src/portable/synopsys/dwc2/dcd_dwc2.c | 20 +++---------- src/tusb_option.h | 2 +- 6 files changed, 32 insertions(+), 71 deletions(-) (limited to 'src/portable') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 80826c895..637281bfc 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -195,7 +195,6 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_USBIP_DWC2_TEST_MODE // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9 #define TUP_DCD_ENDPOINT_MAX 6 @@ -210,7 +209,6 @@ // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS - #define TUP_USBIP_DWC2_TEST_MODE #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H7) @@ -285,7 +283,6 @@ defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) #define TUP_DCD_ENDPOINT_MAX 9 #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_USBIP_DWC2_TEST_MODE #else #define TUP_DCD_ENDPOINT_MAX 6 #endif diff --git a/src/common/tusb_types.h b/src/common/tusb_types.h index b571f9b72..1501a5af6 100644 --- a/src/common/tusb_types.h +++ b/src/common/tusb_types.h @@ -214,6 +214,15 @@ enum { #define TUSB_DESC_CONFIG_POWER_MA(x) ((x)/2) +// USB 2.0 Spec Table 9-7: Test Mode Selectors +typedef enum { + TUSB_FEATURE_TEST_J = 1, + TUSB_FEATURE_TEST_K, + TUSB_FEATURE_TEST_SE0_NAK, + TUSB_FEATURE_TEST_PACKET, + TUSB_FEATURE_TEST_FORCE_ENABLE, +} tusb_feature_test_mode_t; + //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ diff --git a/src/device/dcd.h b/src/device/dcd.h index f6735b077..5356e9be1 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -89,14 +89,6 @@ typedef struct TU_ATTR_ALIGNED(4) { }; } dcd_event_t; -typedef enum { - TEST_J = 1, - TEST_K, - TEST_SE0_NAK, - TEST_PACKET, - TEST_FORCE_ENABLE, -} test_mode_t; - //TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct"); //--------------------------------------------------------------------+ @@ -150,11 +142,8 @@ void dcd_disconnect(uint8_t rhport); void dcd_sof_enable(uint8_t rhport, bool en); #if CFG_TUD_TEST_MODE -// Check if the test mode is supported, returns true is test mode selector is supported -bool dcd_check_test_mode_support(test_mode_t test_selector) TU_ATTR_WEAK; - // Put device into a test mode (needs power cycle to quit) -void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) TU_ATTR_WEAK; +void dcd_enter_test_mode(uint8_t rhport, tusb_feature_test_mode_t test_selector); #endif //--------------------------------------------------------------------+ // Endpoint API diff --git a/src/device/usbd.c b/src/device/usbd.c index 800d9c824..4105a71a4 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -321,9 +321,17 @@ TU_ATTR_ALWAYS_INLINE static inline bool queue_event(dcd_event_t const * event, static bool process_control_request(uint8_t rhport, tusb_control_request_t const * p_request); static bool process_set_config(uint8_t rhport, uint8_t cfg_num); static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const * p_request); + #if CFG_TUD_TEST_MODE -static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); +static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) { + TU_VERIFY(CONTROL_STAGE_ACK == stage); + uint8_t const selector = tu_u16_high(request->wIndex); + TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); + dcd_enter_test_mode(rhport, (tusb_feature_test_mode_t) selector); + return true; +} #endif + // from usbd_control.c void usbd_control_reset(void); void usbd_control_set_request(tusb_control_request_t const *request); @@ -695,7 +703,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const } if ( TUSB_REQ_TYPE_STANDARD != p_request->bmRequestType_bit.type ) { - // Non standard request is not supported + // Non-standard request is not supported TU_BREAKPOINT(); return false; } @@ -759,43 +767,27 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const break; case TUSB_REQ_SET_FEATURE: - // Handle the feature selector - switch(p_request->wValue) - { - // Support for remote wakeup + switch(p_request->wValue) { case TUSB_REQ_FEATURE_REMOTE_WAKEUP: TU_LOG_USBD(" Enable Remote Wakeup\r\n"); - // Host may enable remote wake up before suspending especially HID device _usbd_dev.remote_wakeup_en = true; tud_control_status(rhport, p_request); break; -#if CFG_TUD_TEST_MODE - // Support for TEST_MODE + #if CFG_TUD_TEST_MODE case TUSB_REQ_FEATURE_TEST_MODE: { // Only handle the test mode if supported and valid - TU_VERIFY(dcd_enter_test_mode && dcd_check_test_mode_support && 0 == tu_u16_low(p_request->wIndex)); - - uint8_t selector = tu_u16_high(p_request->wIndex); - - // Stall request if the selected test mode isn't supported - if (!dcd_check_test_mode_support((test_mode_t)selector)) - { - TU_LOG_USBD(" Unsupported Test Mode (test selector index: %d)\r\n", selector); + TU_VERIFY(0 == tu_u16_low(p_request->wIndex)); - return false; - } - - // Acknowledge request - tud_control_status(rhport, p_request); - - TU_LOG_USBD(" Enter Test Mode (test selector index: %d)\r\n", selector); + uint8_t const selector = tu_u16_high(p_request->wIndex); + TU_VERIFY(TUSB_FEATURE_TEST_J <= selector && selector <= TUSB_FEATURE_TEST_FORCE_ENABLE); usbd_control_set_complete_callback(process_test_mode_cb); + tud_control_status(rhport, p_request); break; } -#endif /* CFG_TUD_TEST_MODE */ + #endif /* CFG_TUD_TEST_MODE */ // Stall unsupported feature selector default: return false; @@ -1127,20 +1119,6 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const } } -#if CFG_TUD_TEST_MODE -static bool process_test_mode_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request) -{ - // At this point it should already be ensured that dcd_enter_test_mode() is defined - - // Only enter the test mode after the request for it has completed - TU_VERIFY(CONTROL_STAGE_ACK == stage); - - dcd_enter_test_mode(rhport, (test_mode_t)tu_u16_high(request->wIndex)); - - return true; -} -#endif /* CFG_TUD_TEST_MODE */ - //--------------------------------------------------------------------+ // DCD Event Handler //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index dbcd586c5..9a38b46dc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1195,25 +1195,13 @@ void dcd_int_handler(uint8_t rhport) { // } } -#if defined(TUP_USBIP_DWC2_TEST_MODE) && CFG_TUD_TEST_MODE - -bool dcd_check_test_mode_support(test_mode_t test_selector) { - // Check if test mode selector is unsupported - if (TEST_FORCE_ENABLE < test_selector || TEST_J > test_selector) { - return false; - } - - return true; -} - -void dcd_enter_test_mode(uint8_t rhport, test_mode_t test_selector) { - // Get port address... +#if CFG_TUD_TEST_MODE +void dcd_enter_test_mode(uint8_t rhport, tusb_feature_test_mode_t test_selector) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Enable the test mode - dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (test_selector << DCTL_TCTL_Pos); + dwc2->dctl = (dwc2->dctl & ~DCTL_TCTL_Msk) | (((uint8_t) test_selector) << DCTL_TCTL_Pos); } - -#endif /* TUP_USBIP_DWC2_TEST_MODE && CFG_TUD_TEST_MODE */ +#endif #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index 8990cf92b..f2cc284dc 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -381,7 +381,7 @@ #error "CFG_TUD_ENDPPOINT_MAX must be less than or equal to TUP_DCD_ENDPOINT_MAX" #endif -// USB 2.0 compliance test mode support +// USB 2.0 7.1.20: compliance test mode support #ifndef CFG_TUD_TEST_MODE #define CFG_TUD_TEST_MODE 0 #endif -- cgit v1.3.1 From 770efd9b46db0f8723beebe4bfa4d6694bac2901 Mon Sep 17 00:00:00 2001 From: Liam Fraser Date: Wed, 17 Jul 2024 13:03:09 +0100 Subject: RP2040: Use our own unaligned memcpy to avoid alignment faults with some memcpy implementations --- src/portable/raspberrypi/rp2040/rp2040_usb.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 1ca711c77..c5d1ba3ce 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -53,6 +53,14 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_host_mode(void) { //--------------------------------------------------------------------+ // Implementation //--------------------------------------------------------------------+ +// Provide own byte by byte memcpy as not all copies are aligned +static void unaligned_memcpy(void *dst, const void *src, size_t n) { + uint8_t *dst_byte = (uint8_t*)dst; + const uint8_t *src_byte = (const uint8_t*)src; + while (n--) { + *dst_byte++ = *src_byte++; + } +} void rp2040_usb_init(void) { // Reset usb controller @@ -125,7 +133,7 @@ static uint32_t __tusb_irq_path_func(prepare_ep_buffer)(struct hw_endpoint* ep, if (!ep->rx) { // Copy data from user buffer to hw buffer - memcpy(ep->hw_data_buf + buf_id * 64, ep->user_buf, buflen); + unaligned_memcpy(ep->hw_data_buf + buf_id * 64, ep->user_buf, buflen); ep->user_buf += buflen; // Mark as full @@ -230,7 +238,7 @@ static uint16_t __tusb_irq_path_func(sync_ep_buffer)(struct hw_endpoint* ep, uin // we have received AFTER we have copied it to the user buffer at the appropriate offset assert(buf_ctrl & USB_BUF_CTRL_FULL); - memcpy(ep->user_buf, ep->hw_data_buf + buf_id * 64, xferred_bytes); + unaligned_memcpy(ep->user_buf, ep->hw_data_buf + buf_id * 64, xferred_bytes); ep->xferred_len = (uint16_t) (ep->xferred_len + xferred_bytes); ep->user_buf += xferred_bytes; } -- cgit v1.3.1 From 3804ab9a67737732fe6bcc8e0b016ea00d47ff12 Mon Sep 17 00:00:00 2001 From: Liam Fraser Date: Wed, 17 Jul 2024 15:40:34 +0100 Subject: RP2040: no need to clear usb_hw (usb registers) as they are reset to default state by a hardware reset --- src/portable/raspberrypi/rp2040/rp2040_usb.c | 1 - 1 file changed, 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index c5d1ba3ce..43f48da39 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -75,7 +75,6 @@ void rp2040_usb_init(void) { #pragma GCC diagnostic ignored "-Wstringop-overflow" #endif #endif - memset(usb_hw, 0, sizeof(*usb_hw)); memset(usb_dpram, 0, sizeof(*usb_dpram)); #ifdef __GNUC__ #pragma GCC diagnostic pop -- cgit v1.3.1 From 4de46fcf975d57983192874feea9d94427f5de50 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Jul 2024 16:01:39 +0700 Subject: fix a bug in fsdev introduced by #1942 --- hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.cmake | 1 - hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.cmake | 1 - hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake | 1 - hw/bsp/ch32v20x/family.cmake | 6 ++++++ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 2 +- 5 files changed, 7 insertions(+), 4 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.cmake b/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.cmake index adb0ea741..4aae6bdc2 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.cmake +++ b/hw/bsp/ch32v20x/boards/ch32v203c_r0_1v0/board.cmake @@ -10,7 +10,6 @@ set(LD_RAM_SIZE 20K) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC SYSCLK_FREQ_144MHz_HSE=144000000 - CH32_FLASH_ENHANCE_READ_MODE=1 CFG_EXAMPLE_MSC_DUAL_READONLY ) endfunction() diff --git a/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.cmake b/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.cmake index 6fe3e05b2..ecb8b378f 100644 --- a/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.cmake +++ b/hw/bsp/ch32v20x/boards/ch32v203g_r0_1v0/board.cmake @@ -8,7 +8,6 @@ set(LD_RAM_SIZE 10K) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC SYSCLK_FREQ_144MHz_HSI=144000000 - CH32_FLASH_ENHANCE_READ_MODE=1 CFG_EXAMPLE_MSC_DUAL_READONLY ) endfunction() diff --git a/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake b/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake index ed7365797..a0bf12b5c 100644 --- a/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake +++ b/hw/bsp/ch32v20x/boards/nanoch32v203/board.cmake @@ -8,7 +8,6 @@ set(LD_RAM_SIZE 20K) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC SYSCLK_FREQ_144MHz_HSE=144000000 - CH32_FLASH_ENHANCE_READ_MODE=1 CFG_EXAMPLE_MSC_DUAL_READONLY ) endfunction() diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index bf929b862..380ef190d 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -72,6 +72,12 @@ function(add_board_target BOARD_TARGET) update_board(${BOARD_TARGET}) + if (LD_FLASH_SIZE STREQUAL 224K) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CH32_FLASH_ENHANCE_READ_MODE=1 + ) + endif() + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_compile_options(${BOARD_TARGET} PUBLIC -mcmodel=medany diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 8bfb899ca..39f33bc34 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -1004,7 +1004,7 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui srcVal++; } - if (wNBytes) { + if (wNBytes & 0x01) { temp1 = (uint16_t) *srcVal; *pdwVal = temp1; } -- cgit v1.3.1 From c0f38ebf8d483da02a9074eaf021e1660a55fd75 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Jul 2024 19:53:41 +0700 Subject: fsdev read/write packet use unaligned function --- hw/bsp/ch32v20x/family.c | 11 +++ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 108 +++++++++++--------------- src/portable/st/stm32_fsdev/fsdev_common.h | 13 +++- 3 files changed, 64 insertions(+), 68 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/ch32v20x/family.c b/hw/bsp/ch32v20x/family.c index 542d4b5db..43dd7e032 100644 --- a/hw/bsp/ch32v20x/family.c +++ b/hw/bsp/ch32v20x/family.c @@ -173,6 +173,17 @@ uint32_t board_button_read(void) { return false; } +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t* ch32_uuid = ((volatile uint32_t*) 0x1FFFF7E8UL); + uint32_t* serial_32 = (uint32_t*) (uintptr_t) id; + serial_32[0] = ch32_uuid[0]; + serial_32[1] = ch32_uuid[1]; + serial_32[2] = ch32_uuid[2]; + + return 12; +} + int board_uart_read(uint8_t *buf, int len) { (void) buf; (void) len; diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 39f33bc34..8c2b10691 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -426,6 +426,8 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) dcd_read_packet_memory(userMemBuf, pcd_get_ep_rx_address(USB, EPindex), 8); dcd_event_setup_received(0, (uint8_t *)userMemBuf, true); #endif + } else { + TU_BREAKPOINT(); } } else { // Clear RX CTR interrupt flag @@ -941,27 +943,26 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) } #ifdef FSDEV_BUS_32BIT -static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) -{ - const uint8_t *srcVal = src; +static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) { + const uint8_t *src8 = src; volatile uint32_t *dst32 = (volatile uint32_t *)(USB_PMAADDR + dst); for (uint32_t n = wNBytes / 4; n > 0; --n) { - *dst32++ = tu_unaligned_read32(srcVal); - srcVal += 4; + *dst32++ = tu_unaligned_read32(src8); + src8 += 4; } - wNBytes = wNBytes & 0x03; - if (wNBytes) { - uint32_t wrVal = *srcVal; - wNBytes--; + uint16_t odd = wNBytes & 0x03; + if (odd) { + uint32_t wrVal = *src8; + odd--; - if (wNBytes) { - wrVal |= *++srcVal << 8; - wNBytes--; + if (odd) { + wrVal |= *++src8 << 8; + odd--; - if (wNBytes) { - wrVal |= *++srcVal << 16; + if (odd) { + wrVal |= *++src8 << 16; } } @@ -974,39 +975,26 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui // Packet buffer access can only be 8- or 16-bit. /** * @brief Copy a buffer from user memory area to packet memory area (PMA). - * This uses byte-access for user memory (so support non-aligned buffers) - * and 16-bit access for packet memory. + * This uses un-aligned for user memory and 16-bit access for packet memory. * @param dst, byte address in PMA; must be 16-bit aligned * @param src pointer to user memory area. * @param wPMABufAddr address into PMA. * @param wNBytes no. of bytes to be copied. * @retval None */ -static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) -{ +static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) { uint32_t n = (uint32_t)wNBytes >> 1U; - uint16_t temp1, temp2; - const uint8_t *srcVal; - - // The GCC optimizer will combine access to 32-bit sizes if we let it. Force - // it volatile so that it won't do that. - __IO uint16_t *pdwVal; - - srcVal = src; - pdwVal = &pma[FSDEV_PMA_STRIDE * (dst >> 1)]; + const uint8_t *src8 = src; + volatile uint16_t *pdw16 = &pma[FSDEV_PMA_STRIDE * (dst >> 1)]; while (n--) { - temp1 = (uint16_t)*srcVal; - srcVal++; - temp2 = temp1 | ((uint16_t)(((uint16_t)(*srcVal)) << 8U)); - *pdwVal = temp2; - pdwVal += FSDEV_PMA_STRIDE; - srcVal++; + *pdw16 = tu_unaligned_read16(src8); + src8 += 2; + pdw16 += FSDEV_PMA_STRIDE; } if (wNBytes & 0x01) { - temp1 = (uint16_t) *srcVal; - *pdwVal = temp1; + *pdw16 = (uint16_t) *src8; } return true; @@ -1091,27 +1079,27 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNB #ifdef FSDEV_BUS_32BIT static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { - uint8_t *dstVal = dst; + uint8_t *dst8 = dst; volatile uint32_t *src32 = (volatile uint32_t *)(USB_PMAADDR + src); for (uint32_t n = wNBytes / 4; n > 0; --n) { - tu_unaligned_write32(dstVal, *src32++); - dstVal += 4; + tu_unaligned_write32(dst8, *src32++); + dst8 += 4; } - wNBytes = wNBytes & 0x03; - if (wNBytes) { + uint16_t odd = wNBytes & 0x03; + if (odd) { uint32_t rdVal = *src32; - *dstVal = tu_u32_byte0(rdVal); - wNBytes--; + *dst8 = tu_u32_byte0(rdVal); + odd--; - if (wNBytes) { - *++dstVal = tu_u32_byte1(rdVal); - wNBytes--; + if (odd) { + *++dst8 = tu_u32_byte1(rdVal); + odd--; - if (wNBytes) { - *++dstVal = tu_u32_byte2(rdVal); + if (odd) { + *++dst8 = tu_u32_byte2(rdVal); } } } @@ -1121,33 +1109,25 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t #else /** * @brief Copy a buffer from packet memory area (PMA) to user memory area. - * Uses byte-access of system memory and 16-bit access of packet memory + * Uses unaligned for system memory and 16-bit access of packet memory * @param wNBytes no. of bytes to be copied. * @retval None */ -static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) -{ +static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { uint32_t n = (uint32_t)wNBytes >> 1U; - // The GCC optimizer will combine access to 32-bit sizes if we let it. Force - // it volatile so that it won't do that. - __IO const uint16_t *pdwVal; - uint32_t temp; - - pdwVal = &pma[FSDEV_PMA_STRIDE * (src >> 1)]; - uint8_t *dstVal = (uint8_t *)dst; + volatile const uint16_t *pdw16 = &pma[FSDEV_PMA_STRIDE * (src >> 1)]; + uint8_t *dst8 = (uint8_t *)dst; while (n--) { - temp = *pdwVal; - pdwVal += FSDEV_PMA_STRIDE; - *dstVal++ = ((temp >> 0) & 0xFF); - *dstVal++ = ((temp >> 8) & 0xFF); + tu_unaligned_write16(dst8, *pdw16); + dst8 += 2; + pdw16 += FSDEV_PMA_STRIDE; } if (wNBytes & 0x01) { - temp = *pdwVal; - pdwVal += FSDEV_PMA_STRIDE; - *dstVal++ = ((temp >> 0) & 0xFF); + *dst8++ = tu_u16_low(*pdw16); } + return true; } #endif diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index e8a6af8cb..920c17a04 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -35,14 +35,19 @@ #include "stdint.h" // FSDEV_PMA_SIZE is PMA buffer size in bytes. -// On 512-byte devices, access with a stride of two words (use every other 16-bit address) -// On 1024-byte devices, access with a stride of one word (use every 16-bit address) +// - 512-byte devices, access with a stride of two words (use every other 16-bit address) +// - 1024-byte devices, access with a stride of one word (use every 16-bit address) +// - 2048-byte devices, access with 32-bit address // For purposes of accessing the packet -#if ((FSDEV_PMA_SIZE) == 512u) +#if FSDEV_PMA_SIZE == 512 #define FSDEV_PMA_STRIDE (2u) -#elif ((FSDEV_PMA_SIZE) == 1024u) +#elif FSDEV_PMA_SIZE == 1024 #define FSDEV_PMA_STRIDE (1u) +#elif FSDEV_PMA_SIZE == 2048 + #ifndef FSDEV_BUS_32BIT + #warning "FSDEV_PMA_SIZE is 2048, but FSDEV_BUS_32BIT is not defined" + #endif #endif // The fsdev_bus_t type can be used for both register and PMA access necessities -- cgit v1.3.1 From 2f8078f5b57568f32e0d4d87c95fb32e00389b3d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 24 Jul 2024 16:59:12 +0700 Subject: minor changes --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 111 ++++++++++---------------- 1 file changed, 43 insertions(+), 68 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 8c2b10691..8eb463351 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -180,7 +180,7 @@ static uint8_t remoteWakeCountdown; // When wake is requested //--------------------------------------------------------------------+ // into the stack. -static void dcd_handle_bus_reset(void); +static void handle_bus_reset(uint8_t rhport); static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix); static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr); static void dcd_ep_ctr_handler(void); @@ -212,18 +212,12 @@ TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint32_t ep_addr) //--------------------------------------------------------------------+ // Controller API //--------------------------------------------------------------------+ - -void dcd_init(uint8_t rhport) -{ - /* Clocks should already be enabled */ - /* Use __HAL_RCC_USB_CLK_ENABLE(); to enable the clocks before calling this function */ - - /* The RM mentions to use a special ordering of PDWN and FRES, but this isn't done in HAL. - * Here, the RM is followed. */ - +void dcd_init(uint8_t rhport) { + // Follow the RM mentions to use a special ordering of PDWN and FRES for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); } + // Perform USB peripheral reset USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us @@ -238,9 +232,11 @@ void dcd_init(uint8_t rhport) } USB->CNTR = 0; // Enable USB -#if !defined(STM32G0) && !defined(STM32H5) && !defined(STM32U5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address +#if !defined(STM32G0) && !defined(STM32H5) && !defined(STM32U5) + // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address USB->BTABLE = DCD_STM32_BTABLE_BASE; #endif + USB->ISTR = 0; // Clear pending interrupts // Reset endpoints to disabled @@ -250,17 +246,14 @@ void dcd_init(uint8_t rhport) } USB->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; - dcd_handle_bus_reset(); + handle_bus_reset(rhport); // Enable pull-up if supported dcd_connect(rhport); } - -void dcd_sof_enable(uint8_t rhport, bool en) -{ +void dcd_sof_enable(uint8_t rhport, bool en) { (void)rhport; - (void)en; if (en) { USB->CNTR |= USB_CNTR_SOFM; @@ -270,9 +263,7 @@ void dcd_sof_enable(uint8_t rhport, bool en) } // Receive Set Address request, mcu port must also include status IN response -void dcd_set_address(uint8_t rhport, uint8_t dev_addr) -{ - (void)rhport; +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { (void)dev_addr; // Respond with status @@ -282,35 +273,15 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) // do it at dcd_edpt0_status_complete() } -void dcd_remote_wakeup(uint8_t rhport) -{ +void dcd_remote_wakeup(uint8_t rhport) { (void)rhport; USB->CNTR |= USB_CNTR_RESUME; remoteWakeCountdown = 4u; // required to be 1 to 15 ms, ESOF should trigger every 1ms. } -static const tusb_desc_endpoint_t ep0OUT_desc = { - .bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, - .bEndpointAddress = 0x00, - .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0 -}; - -static const tusb_desc_endpoint_t ep0IN_desc = { - .bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, - .bEndpointAddress = 0x80, - .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0 -}; - -static void dcd_handle_bus_reset(void) -{ - USB->DADDR = 0u; // disable USB peripheral by clearing the EF flag +static void handle_bus_reset(uint8_t rhport) { + USB->DADDR = 0u; // disable USB Function for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // Clear EP allocation status @@ -323,17 +294,26 @@ static void dcd_handle_bus_reset(void) // Reset PMA allocation ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX; - dcd_edpt_open(0, &ep0OUT_desc); - dcd_edpt_open(0, &ep0IN_desc); + tusb_desc_endpoint_t ep0_desc = { + .bLength = sizeof(tusb_desc_endpoint_t), + .bDescriptorType = TUSB_DESC_ENDPOINT, + .bEndpointAddress = 0x00, + .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, + .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, + .bInterval = 0 + }; + + dcd_edpt_open(rhport, &ep0_desc); + + ep0_desc.bEndpointAddress = 0x80; + dcd_edpt_open(rhport, &ep0_desc); - USB->DADDR = USB_DADDR_EF; // Set enable flag, and leaving the device address as zero. + USB->DADDR = USB_DADDR_EF; // Enable USB Function } // Handle CTR interrupt for the TX/IN direction -// // Upon call, (wIstr & USB_ISTR_DIR) == 0U -static void dcd_ep_ctr_tx_handler(uint32_t wIstr) -{ +static void dcd_ep_ctr_tx_handler(uint32_t wIstr) { uint32_t EPindex = wIstr & USB_ISTR_EP_ID; uint32_t wEPRegVal = pcd_get_endpoint(USB, EPindex); uint8_t ep_addr = (wEPRegVal & USB_EPADDR_FIELD) | TUSB_DIR_IN_MASK; @@ -406,6 +386,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) // Verify the CTR_RX bit is set. This was in the ST Micro code, // but I'm not sure it's actually necessary? if ((wEPRegVal & USB_EP_CTR_RX) == 0U) { + // TU_ASSERT(false, ); return; } @@ -504,10 +485,7 @@ static void dcd_ep_ctr_handler(void) } } -void dcd_int_handler(uint8_t rhport) -{ - (void)rhport; - +void dcd_int_handler(uint8_t rhport) { uint32_t int_status = USB->ISTR; // const uint32_t handled_ints = USB_ISTR_CTR | USB_ISTR_RESET | USB_ISTR_WKUP // | USB_ISTR_SUSP | USB_ISTR_SOF | USB_ISTR_ESOF; @@ -526,7 +504,7 @@ void dcd_int_handler(uint8_t rhport) if (int_status & USB_ISTR_RESET) { // USBRST is start of reset. USB->ISTR = (fsdev_bus_t)~USB_ISTR_RESET; - dcd_handle_bus_reset(); + handle_bus_reset(rhport); dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); return; // Don't do the rest of the things here; perhaps they've been cleared? } @@ -659,13 +637,12 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) // The STM32F0 doesn't seem to like |= or &= to manipulate the EP#R registers, // so I'm using the #define from HAL here, instead. -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) -{ +bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; - uint8_t const ep_addr = p_endpoint_desc->bEndpointAddress; - uint8_t const ep_idx = dcd_ep_alloc(ep_addr, p_endpoint_desc->bmAttributes.xfer); + uint8_t const ep_addr = desc_ep->bEndpointAddress; + uint8_t const ep_idx = dcd_ep_alloc(ep_addr, desc_ep->bmAttributes.xfer); uint8_t const dir = tu_edpt_dir(ep_addr); - const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); + const uint16_t packet_size = tu_edpt_packet_size(desc_ep); const uint16_t buffer_size = pcd_aligned_buffer_size(packet_size); uint16_t pma_addr; uint32_t wType; @@ -674,7 +651,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) TU_ASSERT(buffer_size <= 64); // Set type - switch (p_endpoint_desc->bmAttributes.xfer) { + switch (desc_ep->bmAttributes.xfer) { case TUSB_XFER_CONTROL: wType = USB_EP_CONTROL; break; @@ -807,7 +784,6 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoin } // Currently, single-buffered, and only 64 bytes at a time (max) - static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t len = (uint16_t)(xfer->total_len - xfer->queued_len); @@ -1007,8 +983,7 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui * @param wNBytes no. of bytes to be copied. * @retval None */ -static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) -{ +static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes) { // Since we copy from a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies tu_fifo_buffer_info_t info; tu_fifo_get_read_info(ff, &info); @@ -1042,8 +1017,9 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNB dst += 4; // Copy rest of wrapped byte - if (wCnt) + if (wCnt) { dcd_write_packet_memory(dst, info.ptr_wrap, wCnt); + } } #else if ((cnt_lin & 0x01) && cnt_wrap) { @@ -1077,8 +1053,7 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNB } #ifdef FSDEV_BUS_32BIT -static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) -{ +static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { uint8_t *dst8 = dst; volatile uint32_t *src32 = (volatile uint32_t *)(USB_PMAADDR + src); @@ -1138,8 +1113,7 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t * @param wNBytes no. of bytes to be copied. * @retval None */ -static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) -{ +static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes) { // Since we copy into a ring buffer FIFO, a wrap might occur making it necessary to conduct two copies // Check for first linear part tu_fifo_buffer_info_t info; @@ -1173,8 +1147,9 @@ static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBy } // Copy rest of wrapped byte - if (wCnt) + if (wCnt) { dcd_read_packet_memory(info.ptr_wrap, src, wCnt); + } } #else if ((cnt_lin & 0x01) && cnt_wrap) { -- cgit v1.3.1 From 0eb0baed190ea671b74528942e4fda87acd259a8 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Jul 2024 11:53:42 +0700 Subject: fsdev: remove unused _setup_packet --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 38 +++++++++++---------------- 1 file changed, 16 insertions(+), 22 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 8eb463351..602b220ab 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -168,11 +168,8 @@ typedef struct { } ep_alloc_t; static xfer_ctl_t xfer_status[CFG_TUD_ENDPPOINT_MAX][2]; - static ep_alloc_t ep_alloc_status[FSDEV_EP_COUNT]; -static TU_ATTR_ALIGNED(4) uint32_t _setup_packet[6]; - static uint8_t remoteWakeCountdown; // When wake is requested //--------------------------------------------------------------------+ @@ -386,18 +383,28 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) // Verify the CTR_RX bit is set. This was in the ST Micro code, // but I'm not sure it's actually necessary? if ((wEPRegVal & USB_EP_CTR_RX) == 0U) { - // TU_ASSERT(false, ); return; } - if ((ep_addr == 0U) && ((wEPRegVal & USB_EP_SETUP) != 0U)) { + if (wEPRegVal & USB_EP_SETUP) { /* Setup packet */ uint32_t count = pcd_get_ep_rx_cnt(USB, EPindex); // Setup packet should always be 8 bytes. If not, ignore it, and try again. if (count == 8) { - // Must reset EP to NAK (in case it had been stalling) (though, maybe too late here) + // Must reset EP to NAK (in case it had been stalling) pcd_set_ep_rx_status(USB, 0u, USB_EP_RX_NAK); pcd_set_ep_tx_status(USB, 0u, USB_EP_TX_NAK); + + // set both data toggle to 1 + uint32_t regVal = pcd_get_endpoint(USB, 0); + if ((regVal & USB_EP_DTOG_TX) == 0) { + pcd_tx_dtog(USB, 0); + } + + if ((regVal & USB_EP_DTOG_RX) == 0) { + pcd_rx_dtog(USB, 0); + } + #ifdef FSDEV_BUS_32BIT dcd_event_setup_received(0, (uint8_t *)(USB_PMAADDR + pcd_get_ep_rx_address(USB, EPindex)), true); #else @@ -405,17 +412,14 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) // user memory, to allow for the 32-bit access that memcpy performs. uint8_t userMemBuf[8]; dcd_read_packet_memory(userMemBuf, pcd_get_ep_rx_address(USB, EPindex), 8); - dcd_event_setup_received(0, (uint8_t *)userMemBuf, true); + dcd_event_setup_received(0, (uint8_t*) userMemBuf, true); #endif - } else { - TU_BREAKPOINT(); } } else { // Clear RX CTR interrupt flag if (ep_addr != 0u) { pcd_clear_rx_ep_ctr(USB, EPindex); } - uint32_t count; uint16_t addr; /* Read from correct register when ISOCHRONOUS (double buffered) */ @@ -553,18 +557,14 @@ void dcd_int_handler(uint8_t rhport) { // Invoked when a control transfer's status stage is complete. // May help DCD to prepare for next control transfer, this API is optional. -void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) -{ +void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *request) { (void)rhport; if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && request->bRequest == TUSB_REQ_SET_ADDRESS) { uint8_t const dev_addr = (uint8_t)request->wValue; - - // Setting new address after the whole request is complete - USB->DADDR &= ~USB_DADDR_ADD; - USB->DADDR |= dev_addr; // leave the enable bit set + USB->DADDR = (USB_DADDR_EF | dev_addr); } } @@ -834,12 +834,6 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) if (dir == TUSB_DIR_IN) { dcd_transmit_packet(xfer, ep_idx); } else { - // A setup token can occur immediately after an OUT STATUS packet so make sure we have a valid - // buffer for the control endpoint. - if (ep_idx == 0 && xfer->buffer == NULL) { - xfer->buffer = (uint8_t *)_setup_packet; - } - uint32_t cnt = (uint32_t ) tu_min16(xfer->total_len, xfer->max_packet_size); uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx); -- cgit v1.3.1 From 02caf007723551f878ab3675c14681801f16354e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Jul 2024 19:00:59 +0700 Subject: simplify btable rx/tx count/address access --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 20 +--- src/portable/st/stm32_fsdev/fsdev_common.h | 136 ++++++++++++++++++-------- 2 files changed, 98 insertions(+), 58 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 602b220ab..927ecac85 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -129,21 +129,7 @@ // Configuration //--------------------------------------------------------------------+ -// hardware limit endpoint -#define FSDEV_EP_COUNT 8 -// If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it -// Both of these MUST be a multiple of 2, and are in byte units. -#ifndef DCD_STM32_BTABLE_BASE -#define DCD_STM32_BTABLE_BASE 0U -#endif - -#ifndef DCD_STM32_BTABLE_SIZE -#define DCD_STM32_BTABLE_SIZE (FSDEV_PMA_SIZE - DCD_STM32_BTABLE_BASE) -#endif - -TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) + (DCD_STM32_BTABLE_SIZE)) <= (FSDEV_PMA_SIZE), "BTABLE does not fit in PMA RAM"); -TU_VERIFY_STATIC(((DCD_STM32_BTABLE_BASE) % 8) == 0, "BTABLE base must be aligned to 8 bytes"); //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF @@ -231,7 +217,7 @@ void dcd_init(uint8_t rhport) { #if !defined(STM32G0) && !defined(STM32H5) && !defined(STM32U5) // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address - USB->BTABLE = DCD_STM32_BTABLE_BASE; + USB->BTABLE = FSDEV_BTABLE_BASE; #endif USB->ISTR = 0; // Clear pending interrupts @@ -289,7 +275,7 @@ static void handle_bus_reset(uint8_t rhport) { } // Reset PMA allocation - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX; + ep_buf_ptr = FSDEV_BTABLE_BASE + 8 * FSDEV_EP_COUNT; tusb_desc_endpoint_t ep0_desc = { .bLength = sizeof(tusb_desc_endpoint_t), @@ -705,7 +691,7 @@ void dcd_edpt_close_all(uint8_t rhport) } // Reset PMA allocation - ep_buf_ptr = DCD_STM32_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX + 2 * CFG_TUD_ENDPOINT0_SIZE; + ep_buf_ptr = FSDEV_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX + 2 * CFG_TUD_ENDPOINT0_SIZE; } /** diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 920c17a04..d0f928552 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -34,6 +34,14 @@ #include "stdint.h" +// If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it +// Both of these MUST be a multiple of 2, and are in byte units. +#ifndef FSDEV_BTABLE_BASE +#define FSDEV_BTABLE_BASE 0U +#endif + +TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 bytes"); + // FSDEV_PMA_SIZE is PMA buffer size in bytes. // - 512-byte devices, access with a stride of two words (use every other 16-bit address) // - 1024-byte devices, access with a stride of one word (use every 16-bit address) @@ -41,15 +49,50 @@ // For purposes of accessing the packet #if FSDEV_PMA_SIZE == 512 - #define FSDEV_PMA_STRIDE (2u) + #define FSDEV_PMA_STRIDE (2u) // 1x16 bit access scheme + #define pma_aligned TU_ATTR_ALIGNED(4) #elif FSDEV_PMA_SIZE == 1024 - #define FSDEV_PMA_STRIDE (1u) + #define FSDEV_PMA_STRIDE (1u) // 2x16 bit access scheme + #define pma_aligned #elif FSDEV_PMA_SIZE == 2048 #ifndef FSDEV_BUS_32BIT #warning "FSDEV_PMA_SIZE is 2048, but FSDEV_BUS_32BIT is not defined" #endif + #define FSDEV_PMA_STRIDE (1u) // 32 bit access scheme + #define pma_aligned #endif +// hardware limit endpoint +#define FSDEV_EP_COUNT 8 + +// Buffer Table is located in Packet Memory Area (PMA) and therefore its address access is forced to either +// 16-bit or 32-bit depending on FSDEV_BUS_32BIT. +typedef struct { + union { + struct { + volatile pma_aligned uint16_t tx_addr; + volatile pma_aligned uint16_t tx_count; + volatile pma_aligned uint16_t rx_addr; + volatile pma_aligned uint16_t rx_count; + } ep16[FSDEV_EP_COUNT]; + + struct { + volatile uint32_t tx_count_addr; + volatile uint32_t rx_count_addr; + } ep32[FSDEV_EP_COUNT]; + }; +} fsdev_btable_t; + +TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT*8*FSDEV_PMA_STRIDE, "size is not correct"); +TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE does not fit in PMA RAM"); + + +#define FSDEV_BTABLE ((volatile fsdev_btable_t*) (USB_PMAADDR+FSDEV_BTABLE_BASE)) + +//--------------------------------------------------------------------+ +// Helper +//--------------------------------------------------------------------+ + // The fsdev_bus_t type can be used for both register and PMA access necessities // For type-safety create a new macro for the volatile address of PMAADDR // The compiler should warn us if we cast it to a non-volatile type? @@ -110,6 +153,21 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx return *reg; } +/** + * @brief Sets address in an endpoint register. + * @param USBx USB peripheral instance register address. + * @param bEpIdx Endpoint Number. + * @param bAddr Address. + * @retval None + */ +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t bAddr) { + uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); + regVal &= USB_EPREG_MASK; + regVal |= bAddr; + regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; + pcd_set_endpoint(USBx, bEpIdx,regVal); +} + TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); regVal &= (uint32_t)USB_EP_T_MASK; @@ -153,58 +211,47 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, * @retval Counter value */ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - return (pma32[2*bEpIdx] & 0x03FF0000) >> 16; + uint16_t count; +#ifdef FSDEV_BUS_32BIT + count = (FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr >> 16); #else - volatile const uint16_t *regPtr = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); - return *regPtr & 0x3ffU; + count = FSDEV_BTABLE->ep16[bEpIdx].tx_count; #endif + + return count & 0x3FFU; } TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - return (pma32[2*bEpIdx + 1] & 0x03FF0000) >> 16; + uint16_t count; +#ifdef FSDEV_BUS_32BIT + count = (FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr >> 16); #else - volatile const uint16_t *regPtr = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); - return *regPtr & 0x3ffU; + count = FSDEV_BTABLE->ep16[bEpIdx].rx_count; #endif + + return count & 0x3FFU; } #define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt #define pcd_get_ep_dbuf1_cnt pcd_get_ep_rx_cnt -/** - * @brief Sets address in an endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param bAddr Address. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t bAddr) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= bAddr; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx,regVal); -} - TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - return pma32[2*bEpIdx] & 0x0000FFFFu ; +#ifdef FSDEV_BUS_32BIT + return FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr & 0x0000FFFFu; #else - return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u); + return FSDEV_BTABLE->ep16[bEpIdx].tx_addr; #endif } TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - return pma32[2*bEpIdx + 1] & 0x0000FFFFu; +#ifdef FSDEV_BUS_32BIT + return FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr & 0x0000FFFFu; #else - return *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u); + return FSDEV_BTABLE->ep16[bEpIdx].rx_addr; #endif } @@ -212,20 +259,24 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * #define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - pma32[2*bEpIdx] = (pma32[2*bEpIdx] & 0xFFFF0000u) | (addr & 0x0000FFFCu); +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr; + count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); + FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr = count_addr; #else - *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 0u) = addr; + FSDEV_BTABLE->ep16[bEpIdx].tx_addr = addr; #endif } TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & 0xFFFF0000u) | (addr & 0x0000FFFCu); +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr; + count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); + FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr = count_addr; #else - *pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 2u) = addr; + FSDEV_BTABLE->ep16[bEpIdx].rx_addr = addr; #endif } @@ -233,12 +284,15 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USB #define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - pma32[2*bEpIdx] = (pma32[2*bEpIdx] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr; + count_addr = (count_addr & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); + FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr = count_addr; #else - volatile uint16_t * reg = pcd_ep_tx_cnt_ptr(USBx, bEpIdx); - *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); + uint16_t count = FSDEV_BTABLE->ep16[bEpIdx].tx_count; + count = (count & ~0x3FFU) | (wCount & 0x3FFU); + FSDEV_BTABLE->ep16[bEpIdx].tx_count = count; #endif } -- cgit v1.3.1 From 3b8f9a2b1f43a8353c1556e30a61dd0c2416c57f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Jul 2024 23:51:20 +0700 Subject: refactor btable tx/rx into arr[2] --- src/portable/st/stm32_fsdev/fsdev_common.h | 95 ++++++++++++++++-------------- 1 file changed, 51 insertions(+), 44 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index d0f928552..7d1f7fd90 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -69,17 +69,18 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 b // 16-bit or 32-bit depending on FSDEV_BUS_32BIT. typedef struct { union { + // 0: tx, 1: rx + + // strictly 16-bit access (could be 32-bit aligned) struct { - volatile pma_aligned uint16_t tx_addr; - volatile pma_aligned uint16_t tx_count; - volatile pma_aligned uint16_t rx_addr; - volatile pma_aligned uint16_t rx_count; - } ep16[FSDEV_EP_COUNT]; + volatile pma_aligned uint16_t addr; + volatile pma_aligned uint16_t count; + } ep16[FSDEV_EP_COUNT][2]; + // strictly 32-bit access struct { - volatile uint32_t tx_count_addr; - volatile uint32_t rx_count_addr; - } ep32[FSDEV_EP_COUNT]; + volatile uint32_t count_addr; + } ep32[FSDEV_EP_COUNT][2]; }; } fsdev_btable_t; @@ -204,6 +205,24 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, pcd_set_endpoint(USBx, bEpIdx,regVal); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_count(uint32_t ep_id, uint8_t is_rx) { + uint16_t count; +#ifdef FSDEV_BUS_32BIT + count = (FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr >> 16); +#else + count = FSDEV_BTABLE->ep16[ep_id][is_rx].count; +#endif + return count & 0x3FFU; +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t is_rx) { +#ifdef FSDEV_BUS_32BIT + return FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr & 0x0000FFFFu; +#else + return FSDEV_BTABLE->ep16[ep_id][is_rx].addr; +#endif +} + /** * @brief gets counter of the tx buffer. * @param USBx USB peripheral instance register address. @@ -212,26 +231,12 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, */ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { (void) USBx; - uint16_t count; -#ifdef FSDEV_BUS_32BIT - count = (FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr >> 16); -#else - count = FSDEV_BTABLE->ep16[bEpIdx].tx_count; -#endif - - return count & 0x3FFU; + return btable_get_count(bEpIdx, 0); } TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { (void) USBx; - uint16_t count; -#ifdef FSDEV_BUS_32BIT - count = (FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr >> 16); -#else - count = FSDEV_BTABLE->ep16[bEpIdx].rx_count; -#endif - - return count & 0x3FFU; + return btable_get_count(bEpIdx, 1); } #define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt @@ -239,44 +244,46 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USB TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { (void) USBx; -#ifdef FSDEV_BUS_32BIT - return FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr & 0x0000FFFFu; -#else - return FSDEV_BTABLE->ep16[bEpIdx].tx_addr; -#endif + return btable_get_addr(bEpIdx, 0); } TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { (void) USBx; -#ifdef FSDEV_BUS_32BIT - return FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr & 0x0000FFFFu; -#else - return FSDEV_BTABLE->ep16[bEpIdx].rx_addr; -#endif + return btable_get_addr(bEpIdx, 1); } #define pcd_get_ep_dbuf0_address pcd_get_ep_tx_address #define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address + +//TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_set_addr(uint32_t ep_id, uint8_t is_rx, uint16_t addr) { +// +//} +// +//TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_set_count(uint32_t ep_id, uint8_t is_rx, uint16_t count) { +// +//} + + TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { (void) USBx; #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr; + uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx][0].count_addr; count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr = count_addr; + FSDEV_BTABLE->ep32[bEpIdx][0].count_addr = count_addr; #else - FSDEV_BTABLE->ep16[bEpIdx].tx_addr = addr; + FSDEV_BTABLE->ep16[bEpIdx][0].addr = addr; #endif } TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { (void) USBx; #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr; + uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx][1].count_addr; count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[bEpIdx].rx_count_addr = count_addr; + FSDEV_BTABLE->ep32[bEpIdx][1].count_addr = count_addr; #else - FSDEV_BTABLE->ep16[bEpIdx].rx_addr = addr; + FSDEV_BTABLE->ep16[bEpIdx][1].addr = addr; #endif } @@ -286,13 +293,13 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USB TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { (void) USBx; #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr; + uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx][0].count_addr; count_addr = (count_addr & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); - FSDEV_BTABLE->ep32[bEpIdx].tx_count_addr = count_addr; + FSDEV_BTABLE->ep32[bEpIdx][0].count_addr = count_addr; #else - uint16_t count = FSDEV_BTABLE->ep16[bEpIdx].tx_count; + uint16_t count = FSDEV_BTABLE->ep16[bEpIdx][0].count; count = (count & ~0x3FFU) | (wCount & 0x3FFU); - FSDEV_BTABLE->ep16[bEpIdx].tx_count = count; + FSDEV_BTABLE->ep16[bEpIdx][0].count = count; #endif } -- cgit v1.3.1 From 75d3a3be84fa50abd5519e1879aa5dafc4a5c37d Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 26 Jul 2024 00:02:06 +0700 Subject: implement btable_set_addr/count --- src/portable/st/stm32_fsdev/fsdev_common.h | 51 +++++++++++++----------------- 1 file changed, 22 insertions(+), 29 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 7d1f7fd90..58a9ed96d 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -256,51 +256,44 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * #define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address -//TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_set_addr(uint32_t ep_id, uint8_t is_rx, uint16_t addr) { -// -//} -// -//TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_set_count(uint32_t ep_id, uint8_t is_rx, uint16_t count) { -// -//} - - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { - (void) USBx; +TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t is_rx, uint16_t addr) { #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx][0].count_addr; + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr; count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[bEpIdx][0].count_addr = count_addr; + FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr = count_addr; #else - FSDEV_BTABLE->ep16[bEpIdx][0].addr = addr; + FSDEV_BTABLE->ep16[ep_id][is_rx].addr = addr; #endif } -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { - (void) USBx; +TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t is_rx, uint16_t byte_count) { #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx][1].count_addr; - count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[bEpIdx][1].count_addr = count_addr; + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr; + count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); + FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr = count_addr; #else - FSDEV_BTABLE->ep16[bEpIdx][1].addr = addr; + uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][is_rx].count; + cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); + FSDEV_BTABLE->ep16[ep_id][is_rx].count = cnt; #endif } +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { + (void) USBx; + btable_set_addr(bEpIdx, 0, addr); +} + +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { + (void) USBx; + btable_set_addr(bEpIdx, 1, addr); +} + #define pcd_set_ep_dbuf0_address pcd_set_ep_tx_address #define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { (void) USBx; -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[bEpIdx][0].count_addr; - count_addr = (count_addr & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); - FSDEV_BTABLE->ep32[bEpIdx][0].count_addr = count_addr; -#else - uint16_t count = FSDEV_BTABLE->ep16[bEpIdx][0].count; - count = (count & ~0x3FFU) | (wCount & 0x3FFU); - FSDEV_BTABLE->ep16[bEpIdx][0].count = count; -#endif + btable_set_count(bEpIdx, 0, wCount); } #define pcd_set_ep_tx_dbuf0_cnt pcd_set_ep_tx_cnt -- cgit v1.3.1 From 6771ef35d9fd61bcddb305dedef7d9f4addf86a5 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Jul 2024 11:17:55 +0700 Subject: more btable set/get clean up --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 54 +++++++++------------------ src/portable/st/stm32_fsdev/fsdev_common.h | 24 +----------- 2 files changed, 19 insertions(+), 59 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 927ecac85..fc1627a1c 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -320,12 +320,8 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) { return; } xfer->iso_in_sending = false; - - if (wEPRegVal & USB_EP_DTOG_TX) { - pcd_set_ep_tx_dbuf0_cnt(USB, EPindex, 0); - } else { - pcd_set_ep_tx_dbuf1_cnt(USB, EPindex, 0); - } + uint8_t buf_id = (wEPRegVal & USB_EP_DTOG_TX) ? 0 : 1; + btable_set_count(EPindex, buf_id, 0); } if ((xfer->total_len != xfer->queued_len)) { @@ -406,21 +402,16 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) if (ep_addr != 0u) { pcd_clear_rx_ep_ctr(USB, EPindex); } - uint32_t count; - uint16_t addr; - /* Read from correct register when ISOCHRONOUS (double buffered) */ + + uint8_t buf_id; if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { - if (wEPRegVal & USB_EP_DTOG_RX) { - count = pcd_get_ep_dbuf0_cnt(USB, EPindex); - addr = pcd_get_ep_dbuf0_address(USB, EPindex); - } else { - count = pcd_get_ep_dbuf1_cnt(USB, EPindex); - addr = pcd_get_ep_dbuf1_address(USB, EPindex); - } + // ISO endpoints are double buffered + buf_id = (wEPRegVal & USB_EP_DTOG_RX) ? 0 : 1; } else { - count = pcd_get_ep_rx_cnt(USB, EPindex); - addr = pcd_get_ep_rx_address(USB, EPindex); + buf_id = 1; } + uint32_t count = btable_get_count(EPindex, buf_id); + uint16_t addr = (uint16_t) btable_get_addr(EPindex, buf_id); TU_ASSERT(count <= xfer->max_packet_size, /**/); @@ -630,7 +621,6 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { uint8_t const dir = tu_edpt_dir(ep_addr); const uint16_t packet_size = tu_edpt_packet_size(desc_ep); const uint16_t buffer_size = pcd_aligned_buffer_size(packet_size); - uint16_t pma_addr; uint32_t wType; TU_ASSERT(ep_idx < FSDEV_EP_COUNT); @@ -658,7 +648,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { pcd_set_ep_address(USB, ep_idx, tu_edpt_number(ep_addr)); /* Create a packet memory buffer area. */ - pma_addr = dcd_pma_alloc(buffer_size, false); + uint16_t pma_addr = dcd_pma_alloc(buffer_size, false); if (dir == TUSB_DIR_IN) { pcd_set_ep_tx_address(USB, ep_idx, pma_addr); @@ -732,11 +722,9 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet uint32_t pma_addr = dcd_pma_alloc(buffer_size, true); uint16_t pma_addr2 = pma_addr; #endif - pcd_set_ep_tx_address(USB, ep_idx, pma_addr); - pcd_set_ep_rx_address(USB, ep_idx, pma_addr2); - + btable_set_addr(ep_idx, 0, pma_addr); + btable_set_addr(ep_idx, 1, pma_addr2); pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); - xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; return true; @@ -770,8 +758,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoin } // Currently, single-buffered, and only 64 bytes at a time (max) -static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) -{ +static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t len = (uint16_t)(xfer->total_len - xfer->queued_len); if (len > xfer->max_packet_size) { len = xfer->max_packet_size; @@ -779,20 +766,15 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) uint16_t ep_reg = pcd_get_endpoint(USB, ep_ix); bool const is_iso = (ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; - uint16_t addr_ptr; + uint8_t buf_id; if (is_iso) { - if (ep_reg & USB_EP_DTOG_TX) { - addr_ptr = pcd_get_ep_dbuf1_address(USB, ep_ix); - pcd_set_ep_tx_dbuf1_cnt(USB, ep_ix, len); - } else { - addr_ptr = pcd_get_ep_dbuf0_address(USB, ep_ix); - pcd_set_ep_tx_dbuf0_cnt(USB, ep_ix, len); - } + buf_id = (ep_reg & USB_EP_DTOG_TX) ? 1 : 0; } else { - addr_ptr = pcd_get_ep_tx_address(USB, ep_ix); - pcd_set_ep_tx_cnt(USB, ep_ix, len); + buf_id = 0; } + uint16_t addr_ptr = (uint16_t) btable_get_addr(ep_ix, buf_id); + btable_set_count(ep_ix, buf_id, len); if (xfer->ff) { dcd_write_packet_memory_ff(xfer->ff, addr_ptr, len); diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 58a9ed96d..72db609cb 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -69,7 +69,7 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 b // 16-bit or 32-bit depending on FSDEV_BUS_32BIT. typedef struct { union { - // 0: tx, 1: rx + // 0: TX (IN), 1: RX (OUT) // strictly 16-bit access (could be 32-bit aligned) struct { @@ -239,9 +239,6 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USB return btable_get_count(bEpIdx, 1); } -#define pcd_get_ep_dbuf0_cnt pcd_get_ep_tx_cnt -#define pcd_get_ep_dbuf1_cnt pcd_get_ep_rx_cnt - TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { (void) USBx; return btable_get_addr(bEpIdx, 0); @@ -252,10 +249,6 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * return btable_get_addr(bEpIdx, 1); } -#define pcd_get_ep_dbuf0_address pcd_get_ep_tx_address -#define pcd_get_ep_dbuf1_address pcd_get_ep_rx_address - - TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t is_rx, uint16_t addr) { #ifdef FSDEV_BUS_32BIT uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr; @@ -288,26 +281,11 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USB btable_set_addr(bEpIdx, 1, addr); } -#define pcd_set_ep_dbuf0_address pcd_set_ep_tx_address -#define pcd_set_ep_dbuf1_address pcd_set_ep_rx_address - TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { (void) USBx; btable_set_count(bEpIdx, 0, wCount); } -#define pcd_set_ep_tx_dbuf0_cnt pcd_set_ep_tx_cnt - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_dbuf1_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[2*bEpIdx + 1] = (pma32[2*bEpIdx + 1] & ~0x03FF0000u) | ((wCount & 0x3FFu) << 16); -#else - volatile uint16_t * reg = pcd_ep_rx_cnt_ptr(USBx, bEpIdx); - *reg = (uint16_t) (*reg & (uint16_t) ~0x3FFU) | (wCount & 0x3FFU); -#endif -} - TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_blsize_num_blocks(USB_TypeDef * USBx, uint32_t rxtx_idx, uint32_t blocksize, uint32_t numblocks) { /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ -- cgit v1.3.1 From 749f0921745ffe3647e6955b41b15e9643f3f3c4 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Jul 2024 12:46:09 +0700 Subject: refactor btable_set_rx_bufsize() --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 23 ++--- src/portable/st/stm32_fsdev/fsdev_common.h | 122 ++++++-------------------- 2 files changed, 41 insertions(+), 104 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index fc1627a1c..cd00e6395 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -370,7 +370,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) if (wEPRegVal & USB_EP_SETUP) { /* Setup packet */ - uint32_t count = pcd_get_ep_rx_cnt(USB, EPindex); + uint32_t count = btable_get_count(EPindex, BTABLE_BUF_RX); // Setup packet should always be 8 bytes. If not, ignore it, and try again. if (count == 8) { // Must reset EP to NAK (in case it had been stalling) @@ -387,13 +387,14 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) pcd_rx_dtog(USB, 0); } + uint16_t rx_addr = btable_get_addr(EPindex, BTABLE_BUF_RX); #ifdef FSDEV_BUS_32BIT - dcd_event_setup_received(0, (uint8_t *)(USB_PMAADDR + pcd_get_ep_rx_address(USB, EPindex)), true); + dcd_event_setup_received(0, (uint8_t *)(USB_PMAADDR + rx_addr), true); #else // The setup_received function uses memcpy, so this must first copy the setup data into // user memory, to allow for the 32-bit access that memcpy performs. uint8_t userMemBuf[8]; - dcd_read_packet_memory(userMemBuf, pcd_get_ep_rx_address(USB, EPindex), 8); + dcd_read_packet_memory(userMemBuf, rx_addr, 8); dcd_event_setup_received(0, (uint8_t*) userMemBuf, true); #endif } @@ -434,7 +435,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) if ((wEPRegVal & USB_EP_TYPE_MASK) != USB_EP_ISOCHRONOUS) { uint16_t remaining = xfer->total_len - xfer->queued_len; uint16_t cnt = tu_min16(remaining, xfer->max_packet_size); - pcd_set_ep_rx_cnt(USB, EPindex, cnt); + btable_set_rx_bufsize(EPindex, BTABLE_BUF_RX, cnt); } pcd_set_ep_rx_status(USB, EPindex, USB_EP_RX_VALID); } @@ -445,7 +446,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) // (Based on the docs, it seems SETUP will always be accepted after CTR is cleared) if (ep_addr == 0u) { // Always be prepared for a status packet... - pcd_set_ep_rx_cnt(USB, EPindex, CFG_TUD_ENDPOINT0_SIZE); + btable_set_rx_bufsize(EPindex, BTABLE_BUF_RX, CFG_TUD_ENDPOINT0_SIZE); pcd_clear_rx_ep_ctr(USB, EPindex); } } @@ -651,11 +652,11 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { uint16_t pma_addr = dcd_pma_alloc(buffer_size, false); if (dir == TUSB_DIR_IN) { - pcd_set_ep_tx_address(USB, ep_idx, pma_addr); + btable_set_addr(ep_idx, BTABLE_BUF_TX, pma_addr); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); pcd_clear_tx_dtog(USB, ep_idx); } else { - pcd_set_ep_rx_address(USB, ep_idx, pma_addr); + btable_set_addr(ep_idx, BTABLE_BUF_RX, pma_addr); pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); pcd_clear_rx_dtog(USB, ep_idx); } @@ -771,7 +772,7 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { if (is_iso) { buf_id = (ep_reg & USB_EP_DTOG_TX) ? 1 : 0; } else { - buf_id = 0; + buf_id = BTABLE_BUF_TX; } uint16_t addr_ptr = (uint16_t) btable_get_addr(ep_ix, buf_id); btable_set_count(ep_ix, buf_id, len); @@ -806,10 +807,10 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx); if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { - pcd_set_ep_rx_dbuf0_cnt(USB, ep_idx, cnt); - pcd_set_ep_rx_dbuf1_cnt(USB, ep_idx, cnt); + btable_set_rx_bufsize(ep_idx, 0, cnt); + btable_set_rx_bufsize(ep_idx, 1, cnt); } else { - pcd_set_ep_rx_cnt(USB, ep_idx, cnt); + btable_set_rx_bufsize(ep_idx, BTABLE_BUF_RX, cnt); } pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_VALID); diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 72db609cb..05354d705 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -62,6 +62,11 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 b #define pma_aligned #endif +enum { + BTABLE_BUF_TX = 0, + BTABLE_BUF_RX = 1 +}; + // hardware limit endpoint #define FSDEV_EP_COUNT 8 @@ -105,20 +110,6 @@ static volatile uint32_t * const pma32 = (volatile uint32_t*)USB_PMAADDR; typedef uint16_t fsdev_bus_t; // Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; - -TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t * pcd_btable_word_ptr(USB_TypeDef * USBx, size_t x) { - size_t total_word_offset = (((USBx)->BTABLE)>>1) + x; - total_word_offset *= FSDEV_PMA_STRIDE; - return &(pma[total_word_offset]); -} - -TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t* pcd_ep_tx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { - return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 1u); -} - -TU_ATTR_ALWAYS_INLINE static inline volatile uint16_t* pcd_ep_rx_cnt_ptr(USB_TypeDef * USBx, uint32_t bEpIdx) { - return pcd_btable_word_ptr(USBx,(bEpIdx)*4u + 3u); -} #endif /* Aligned buffer size according to hardware */ @@ -205,100 +196,47 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, pcd_set_endpoint(USBx, bEpIdx,regVal); } -TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_count(uint32_t ep_id, uint8_t is_rx) { +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_count(uint32_t ep_id, uint8_t buf_id) { uint16_t count; #ifdef FSDEV_BUS_32BIT - count = (FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr >> 16); + count = (FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr >> 16); #else - count = FSDEV_BTABLE->ep16[ep_id][is_rx].count; + count = FSDEV_BTABLE->ep16[ep_id][buf_id].count; #endif return count & 0x3FFU; } -TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t is_rx) { +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { #ifdef FSDEV_BUS_32BIT - return FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr & 0x0000FFFFu; + return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; #else - return FSDEV_BTABLE->ep16[ep_id][is_rx].addr; + return FSDEV_BTABLE->ep16[ep_id][buf_id].addr; #endif } -/** - * @brief gets counter of the tx buffer. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval Counter value - */ -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { - (void) USBx; - return btable_get_count(bEpIdx, 0); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx) { - (void) USBx; - return btable_get_count(bEpIdx, 1); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { - (void) USBx; - return btable_get_addr(bEpIdx, 0); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx) { - (void) USBx; - return btable_get_addr(bEpIdx, 1); -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t is_rx, uint16_t addr) { +TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr; + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr = count_addr; + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; #else - FSDEV_BTABLE->ep16[ep_id][is_rx].addr = addr; + FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; #endif } -TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t is_rx, uint16_t byte_count) { +TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { #ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr; + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); - FSDEV_BTABLE->ep32[ep_id][is_rx].count_addr = count_addr; + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; #else - uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][is_rx].count; + uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); - FSDEV_BTABLE->ep16[ep_id][is_rx].count = cnt; + FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; #endif } -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { - (void) USBx; - btable_set_addr(bEpIdx, 0, addr); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t addr) { - (void) USBx; - btable_set_addr(bEpIdx, 1, addr); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { - (void) USBx; - btable_set_count(bEpIdx, 0, wCount); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_blsize_num_blocks(USB_TypeDef * USBx, uint32_t rxtx_idx, - uint32_t blocksize, uint32_t numblocks) { - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ -#ifdef FSDEV_BUS_32BIT - (void) USBx; - pma32[rxtx_idx] = (pma32[rxtx_idx] & 0x0000FFFFu) | (blocksize << 31) | ((numblocks - blocksize) << 26); -#else - volatile uint16_t *pdwReg = pcd_btable_word_ptr(USBx, rxtx_idx*2u + 1u); - *pdwReg = (blocksize << 15) | ((numblocks - blocksize) << 10); -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_bufsize(USB_TypeDef * USBx, uint32_t rxtx_idx, uint32_t wCount) { +TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint32_t wCount) { wCount = pcd_aligned_buffer_size(wCount); /* We assume that the buffer size is already aligned to hardware requirements. */ @@ -309,19 +247,17 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_bufsize(USB_TypeDef * USBx, TU_ASSERT((wCount - (numblocks * (blocksize ? 32 : 2))) == 0, /**/); /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ - pcd_set_ep_blsize_num_blocks(USBx, rxtx_idx, blocksize, numblocks); -} + uint16_t bl_nb = (blocksize << 15) | ((numblocks - blocksize) << 10); -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_dbuf0_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { - pcd_set_ep_bufsize(USBx, 2*bEpIdx, wCount); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_cnt(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wCount) { - pcd_set_ep_bufsize(USBx, 2*bEpIdx + 1, wCount); +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (bl_nb << 16) | (count_addr & 0x0000FFFFu); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + FSDEV_BTABLE->ep16[ep_id][buf_id].count = bl_nb; +#endif } -#define pcd_set_ep_rx_dbuf1_cnt pcd_set_ep_rx_cnt - /** * @brief sets the status for tx transfer (bits STAT_TX[1:0]). * @param USBx USB peripheral instance register address. -- cgit v1.3.1 From b15814b2f9579ef126b2ad30b6fff0e338ead3ef Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Jul 2024 16:29:54 +0700 Subject: move align buffer to pma_alloc() --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 32 +++--- src/portable/st/stm32_fsdev/fsdev_common.h | 140 +++++++++++++------------- 2 files changed, 85 insertions(+), 87 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index cd00e6395..2be6ef031 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -170,7 +170,7 @@ static void dcd_ep_ctr_handler(void); // PMA allocation/access static uint16_t ep_buf_ptr; ///< Points to first free memory location -static uint32_t dcd_pma_alloc(uint16_t length, bool dbuf); +static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf); static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes); static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes); @@ -551,21 +551,19 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *req * In case of double buffering, high 16bit is the address of 2nd buffer * During failure, TU_ASSERT is used. If this happens, rework/reallocate memory manually. */ -static uint32_t dcd_pma_alloc(uint16_t length, bool dbuf) +static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf) { - // Ensure allocated buffer is aligned -#ifdef FSDEV_BUS_32BIT - length = (length + 3) & ~0x03; -#else - length = (length + 1) & ~0x01; -#endif + uint8_t blsize, num_block; + uint16_t aligned_len = pma_align_buffer_size(len, &blsize, &num_block); + (void) blsize; + (void) num_block; uint32_t addr = ep_buf_ptr; - ep_buf_ptr = (uint16_t)(ep_buf_ptr + length); // increment buffer pointer + ep_buf_ptr = (uint16_t)(ep_buf_ptr + aligned_len); // increment buffer pointer if (dbuf) { addr |= ((uint32_t)ep_buf_ptr) << 16; - ep_buf_ptr = (uint16_t)(ep_buf_ptr + length); // increment buffer pointer + ep_buf_ptr = (uint16_t)(ep_buf_ptr + aligned_len); // increment buffer pointer } // Verify packet buffer is not overflowed @@ -621,11 +619,9 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { uint8_t const ep_idx = dcd_ep_alloc(ep_addr, desc_ep->bmAttributes.xfer); uint8_t const dir = tu_edpt_dir(ep_addr); const uint16_t packet_size = tu_edpt_packet_size(desc_ep); - const uint16_t buffer_size = pcd_aligned_buffer_size(packet_size); uint32_t wType; TU_ASSERT(ep_idx < FSDEV_EP_COUNT); - TU_ASSERT(buffer_size <= 64); // Set type switch (desc_ep->bmAttributes.xfer) { @@ -649,7 +645,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { pcd_set_ep_address(USB, ep_idx, tu_edpt_number(ep_addr)); /* Create a packet memory buffer area. */ - uint16_t pma_addr = dcd_pma_alloc(buffer_size, false); + uint16_t pma_addr = dcd_pma_alloc(packet_size, false); if (dir == TUSB_DIR_IN) { btable_set_addr(ep_idx, BTABLE_BUF_TX, pma_addr); @@ -707,22 +703,20 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) } } -bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) -{ +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void)rhport; uint8_t const ep_idx = dcd_ep_alloc(ep_addr, TUSB_XFER_ISOCHRONOUS); - const uint16_t buffer_size = pcd_aligned_buffer_size(largest_packet_size); /* Create a packet memory buffer area. Enable double buffering for devices with 2048 bytes PMA, for smaller devices double buffering occupy too much space. */ + uint32_t pma_addr = dcd_pma_alloc(largest_packet_size, true); #if FSDEV_PMA_SIZE > 1024u - uint32_t pma_addr = dcd_pma_alloc(buffer_size, true); uint16_t pma_addr2 = pma_addr >> 16; #else - uint32_t pma_addr = dcd_pma_alloc(buffer_size, true); uint16_t pma_addr2 = pma_addr; #endif + btable_set_addr(ep_idx, 0, pma_addr); btable_set_addr(ep_idx, 1, pma_addr2); pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); @@ -803,7 +797,7 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) if (dir == TUSB_DIR_IN) { dcd_transmit_packet(xfer, ep_idx); } else { - uint32_t cnt = (uint32_t ) tu_min16(xfer->total_len, xfer->max_packet_size); + uint32_t cnt = (uint32_t) tu_min16(xfer->total_len, xfer->max_packet_size); uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx); if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 05354d705..c8d259cfa 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -96,7 +96,7 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE #define FSDEV_BTABLE ((volatile fsdev_btable_t*) (USB_PMAADDR+FSDEV_BTABLE_BASE)) //--------------------------------------------------------------------+ -// Helper +// BTable //--------------------------------------------------------------------+ // The fsdev_bus_t type can be used for both register and PMA access necessities @@ -112,18 +112,84 @@ typedef uint16_t fsdev_bus_t; static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; #endif +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { +#ifdef FSDEV_BUS_32BIT + return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; +#else + return FSDEV_BTABLE->ep16[ep_id][buf_id].addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_count(uint32_t ep_id, uint8_t buf_id) { + uint16_t count; +#ifdef FSDEV_BUS_32BIT + count = (FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr >> 16); +#else + count = FSDEV_BTABLE->ep16[ep_id][buf_id].count; +#endif + return count & 0x3FFU; +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; + cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); + FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; +#endif +} + /* Aligned buffer size according to hardware */ -TU_ATTR_ALWAYS_INLINE static inline uint16_t pcd_aligned_buffer_size(uint16_t size) { +TU_ATTR_ALWAYS_INLINE static inline uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block) { /* The STM32 full speed USB peripheral supports only a limited set of * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ - uint16_t blocksize = (size > 62) ? 32 : 2; + uint16_t block_in_bytes; + if (size > 62) { + block_in_bytes = 32; + *blsize = 1; + } else { + block_in_bytes = 2; + *blsize = 0; + } + + *num_block = tu_div_ceil(size, block_in_bytes); - // Round up while dividing requested size by blocksize - uint16_t numblocks = (size + blocksize - 1) / blocksize ; + return (*num_block) * block_in_bytes; +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint32_t wCount) { + uint8_t blsize, num_block; + (void) pma_align_buffer_size(wCount, &blsize, &num_block); - return numblocks * blocksize; + /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ + uint16_t bl_nb = (blsize << 15) | ((num_block - blsize) << 10); + +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (bl_nb << 16) | (count_addr & 0x0000FFFFu); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + FSDEV_BTABLE->ep16[ep_id][buf_id].count = bl_nb; +#endif } +//--------------------------------------------------------------------+ +// Endpoint +//--------------------------------------------------------------------+ + TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wRegValue) { #ifdef FSDEV_BUS_32BIT (void) USBx; @@ -196,68 +262,6 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, pcd_set_endpoint(USBx, bEpIdx,regVal); } -TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_count(uint32_t ep_id, uint8_t buf_id) { - uint16_t count; -#ifdef FSDEV_BUS_32BIT - count = (FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr >> 16); -#else - count = FSDEV_BTABLE->ep16[ep_id][buf_id].count; -#endif - return count & 0x3FFU; -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { -#ifdef FSDEV_BUS_32BIT - return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; -#else - return FSDEV_BTABLE->ep16[ep_id][buf_id].addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; - cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); - FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint32_t wCount) { - wCount = pcd_aligned_buffer_size(wCount); - - /* We assume that the buffer size is already aligned to hardware requirements. */ - uint16_t blocksize = (wCount > 62) ? 1 : 0; - uint16_t numblocks = wCount / (blocksize ? 32 : 2); - - /* There should be no remainder in the above calculation */ - TU_ASSERT((wCount - (numblocks * (blocksize ? 32 : 2))) == 0, /**/); - - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ - uint16_t bl_nb = (blocksize << 15) | ((numblocks - blocksize) << 10); - -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (bl_nb << 16) | (count_addr & 0x0000FFFFu); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - FSDEV_BTABLE->ep16[ep_id][buf_id].count = bl_nb; -#endif -} - /** * @brief sets the status for tx transfer (bits STAT_TX[1:0]). * @param USBx USB peripheral instance register address. -- cgit v1.3.1 From 1cf8e34ae5fc6466d07ac438691391c7a5a809ff Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Jul 2024 20:32:26 +0700 Subject: improve set endpoint --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 41 +++++----- src/portable/st/stm32_fsdev/fsdev_ch32.h | 35 ++++----- src/portable/st/stm32_fsdev/fsdev_common.h | 104 +++++++++++++++++--------- src/portable/st/stm32_fsdev/fsdev_stm32.h | 17 +++++ 4 files changed, 125 insertions(+), 72 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 2be6ef031..6007b4a02 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -616,24 +616,24 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; uint8_t const ep_addr = desc_ep->bEndpointAddress; - uint8_t const ep_idx = dcd_ep_alloc(ep_addr, desc_ep->bmAttributes.xfer); uint8_t const dir = tu_edpt_dir(ep_addr); const uint16_t packet_size = tu_edpt_packet_size(desc_ep); - uint32_t wType; - + uint8_t const ep_idx = dcd_ep_alloc(ep_addr, desc_ep->bmAttributes.xfer); TU_ASSERT(ep_idx < FSDEV_EP_COUNT); + uint32_t ep_reg = FSDEV_REG->ep[ep_idx].reg & ~USB_EPREG_MASK; + ep_reg |= tu_edpt_number(ep_addr) | USB_EP_CTR_RX | USB_EP_CTR_TX; + // Set type switch (desc_ep->bmAttributes.xfer) { case TUSB_XFER_CONTROL: - wType = USB_EP_CONTROL; + ep_reg |= USB_EP_CONTROL; break; case TUSB_XFER_BULK: - wType = USB_EP_CONTROL; + ep_reg |= USB_EP_CONTROL; // FIXME should it be bulk? break; - case TUSB_XFER_INTERRUPT: - wType = USB_EP_INTERRUPT; + ep_reg |= USB_EP_INTERRUPT; break; default: @@ -641,24 +641,23 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { TU_ASSERT(false); } - pcd_set_eptype(USB, ep_idx, wType); - pcd_set_ep_address(USB, ep_idx, tu_edpt_number(ep_addr)); - /* Create a packet memory buffer area. */ uint16_t pma_addr = dcd_pma_alloc(packet_size, false); + btable_set_addr(ep_idx, dir == TUSB_DIR_IN ? BTABLE_BUF_TX : BTABLE_BUF_RX, pma_addr); + + xfer_ctl_ptr(ep_addr)->max_packet_size = packet_size; + xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; if (dir == TUSB_DIR_IN) { - btable_set_addr(ep_idx, BTABLE_BUF_TX, pma_addr); - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); - pcd_clear_tx_dtog(USB, ep_idx); + ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); + ep_reg = ep_add_tx_dtog(ep_reg, 0); + ep_reg &= ~(USB_EPRX_STAT | USB_EP_DTOG_RX); } else { - btable_set_addr(ep_idx, BTABLE_BUF_RX, pma_addr); - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); - pcd_clear_rx_dtog(USB, ep_idx); + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); + ep_reg = ep_add_rx_dtog(ep_reg, 0); + ep_reg &= ~(USB_EPTX_STAT | USB_EP_DTOG_TX); } - - xfer_ctl_ptr(ep_addr)->max_packet_size = packet_size; - xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; + pcd_set_endpoint(USB, ep_idx, ep_reg); return true; } @@ -731,7 +730,8 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoin uint8_t const ep_addr = p_endpoint_desc->bEndpointAddress; uint8_t const ep_idx = xfer_ctl_ptr(ep_addr)->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - const uint16_t packet_size = tu_edpt_packet_size(p_endpoint_desc); + + xfer_ctl_ptr(ep_addr)->max_packet_size = tu_edpt_packet_size(p_endpoint_desc); pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); @@ -747,7 +747,6 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoin pcd_tx_dtog(USB, ep_idx); } - xfer_ctl_ptr(ep_addr)->max_packet_size = packet_size; return true; } diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h index f63a80d56..81ef08b8a 100644 --- a/src/portable/st/stm32_fsdev/fsdev_ch32.h +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -55,28 +55,29 @@ #define FSDEV_PMA_SIZE (512u) +#if 1 // volatile 32-bit aligned -#define _va32 volatile TU_ATTR_ALIGNED(4) +#define _vaa32 volatile TU_ATTR_ALIGNED(4) typedef struct { - _va32 uint16_t EP0R; // 00: USB Endpoint 0 register - _va32 uint16_t EP1R; // 04: USB Endpoint 1 register - _va32 uint16_t EP2R; // 08: USB Endpoint 2 register - _va32 uint16_t EP3R; // 0C: USB Endpoint 3 register - _va32 uint16_t EP4R; // 10: USB Endpoint 4 register - _va32 uint16_t EP5R; // 14: USB Endpoint 5 register - _va32 uint16_t EP6R; // 18: USB Endpoint 6 register - _va32 uint16_t EP7R; // 1C: USB Endpoint 7 register - _va32 uint16_t RESERVED7[16]; // Reserved - _va32 uint16_t CNTR; // 40: Control register - _va32 uint16_t ISTR; // 44: Interrupt status register - _va32 uint16_t FNR; // 48: Frame number register - _va32 uint16_t DADDR; // 4C: Device address register - _va32 uint16_t BTABLE; // 50: Buffer Table address register + _vaa32 uint16_t EP0R; // 00: USB Endpoint 0 register + _vaa32 uint16_t EP1R; // 04: USB Endpoint 1 register + _vaa32 uint16_t EP2R; // 08: USB Endpoint 2 register + _vaa32 uint16_t EP3R; // 0C: USB Endpoint 3 register + _vaa32 uint16_t EP4R; // 10: USB Endpoint 4 register + _vaa32 uint16_t EP5R; // 14: USB Endpoint 5 register + _vaa32 uint16_t EP6R; // 18: USB Endpoint 6 register + _vaa32 uint16_t EP7R; // 1C: USB Endpoint 7 register + _vaa32 uint16_t RESERVED7[16]; // Reserved + _vaa32 uint16_t CNTR; // 40: Control register + _vaa32 uint16_t ISTR; // 44: Interrupt status register + _vaa32 uint16_t FNR; // 48: Frame number register + _vaa32 uint16_t DADDR; // 4C: Device address register + _vaa32 uint16_t BTABLE; // 50: Buffer Table address register } USB_TypeDef; +#endif -TU_VERIFY_STATIC(sizeof(USB_TypeDef) == 0x54, "Size is not correct"); -TU_VERIFY_STATIC(offsetof(USB_TypeDef, CNTR) == 0x40, "Wrong offset"); +#define FSDEV_REG_BASE 0x40005C00UL #define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ #define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000UL) /*!< USB_IP Packet Memory Area base address */ diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index c8d259cfa..3d1e1fe4a 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -95,9 +95,8 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE #define FSDEV_BTABLE ((volatile fsdev_btable_t*) (USB_PMAADDR+FSDEV_BTABLE_BASE)) -//--------------------------------------------------------------------+ -// BTable -//--------------------------------------------------------------------+ +// volatile 32-bit aligned +#define _va32 volatile TU_ATTR_ALIGNED(4) // The fsdev_bus_t type can be used for both register and PMA access necessities // For type-safety create a new macro for the volatile address of PMAADDR @@ -112,6 +111,39 @@ typedef uint16_t fsdev_bus_t; static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; #endif +typedef struct { +// _va32 fsdev_bus_t EP0R; // 00: USB Endpoint 0 register +// _va32 fsdev_bus_t EP1R; // 04: USB Endpoint 1 register +// _va32 fsdev_bus_t EP2R; // 08: USB Endpoint 2 register +// _va32 fsdev_bus_t EP3R; // 0C: USB Endpoint 3 register +// _va32 fsdev_bus_t EP4R; // 10: USB Endpoint 4 register +// _va32 fsdev_bus_t EP5R; // 14: USB Endpoint 5 register +// _va32 fsdev_bus_t EP6R; // 18: USB Endpoint 6 register +// _va32 fsdev_bus_t EP7R; // 1C: USB Endpoint 7 register + struct { + _va32 fsdev_bus_t reg; + }ep[FSDEV_EP_COUNT]; + + _va32 uint32_t RESERVED7[8]; // Reserved + _va32 fsdev_bus_t CNTR; // 40: Control register + _va32 fsdev_bus_t ISTR; // 44: Interrupt status register + _va32 fsdev_bus_t FNR; // 48: Frame number register + _va32 fsdev_bus_t DADDR; // 4C: Device address register + _va32 fsdev_bus_t BTABLE; // 50: Buffer Table address register (16-bit only) + _va32 fsdev_bus_t LPMCSR; // 54: LPM Control and Status Register (32-bit only) + _va32 fsdev_bus_t BCDR; // 58: Battery Charging Detector Register (32-bit only) +} fsdev_regs_t; + +TU_VERIFY_STATIC(offsetof(fsdev_regs_t, CNTR) == 0x40, "Wrong offset"); +TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); + +#define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) + + +//--------------------------------------------------------------------+ +// BTable +//--------------------------------------------------------------------+ + TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { #ifdef FSDEV_BUS_32BIT return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; @@ -191,24 +223,13 @@ TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, u //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wRegValue) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - volatile uint32_t *reg = (volatile uint32_t *)(USB_DRD_BASE + bEpIdx*4); - *reg = wRegValue; -#else - volatile uint16_t *reg = (volatile uint16_t *)((&USBx->EP0R) + bEpIdx*2u); - *reg = (uint16_t)wRegValue; -#endif + FSDEV_REG->ep[bEpIdx].reg = (fsdev_bus_t) wRegValue; } TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx) { -#ifdef FSDEV_BUS_32BIT (void) USBx; - volatile const uint32_t *reg = (volatile const uint32_t *)(USB_DRD_BASE + bEpIdx*4); -#else - volatile const uint16_t *reg = (volatile const uint16_t *)((&USBx->EP0R) + bEpIdx*2u); -#endif - return *reg; + return FSDEV_REG->ep[bEpIdx].reg; } /** @@ -262,6 +283,21 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, pcd_set_endpoint(USBx, bEpIdx,regVal); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_status(uint32_t reg, uint32_t state) { + return reg | ((reg ^ state) & USB_EPTX_STAT); +} +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_status(uint32_t reg, uint32_t state) { + return reg | ((reg ^ state) & USB_EPRX_STAT); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_dtog(uint32_t reg, uint32_t state) { + return reg | ((reg ^ state) & USB_EP_DTOG_TX); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_dtog(uint32_t reg, uint32_t state) { + return reg | ((reg ^ state) & USB_EP_DTOG_RX); +} + /** * @brief sets the status for tx transfer (bits STAT_TX[1:0]). * @param USBx USB peripheral instance register address. @@ -293,10 +329,10 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx pcd_set_endpoint(USBx, bEpIdx, regVal); } -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - return (regVal & USB_EPRX_STAT) >> (12u); -} +//TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx) { +// uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); +// return (regVal & USB_EPRX_STAT) >> (12u); +//} TU_ATTR_ALWAYS_INLINE static inline void pcd_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); @@ -326,20 +362,20 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_dtog(USB_TypeDef * USBx, } } -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal |= USB_EP_KIND; - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPKIND_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} +//TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { +// uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); +// regVal |= USB_EP_KIND; +// regVal &= USB_EPREG_MASK; +// regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; +// pcd_set_endpoint(USBx, bEpIdx, regVal); +//} +// +//TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { +// uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); +// regVal &= USB_EPKIND_MASK; +// regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; +// pcd_set_endpoint(USBx, bEpIdx, regVal); +//} #ifdef __cplusplus } diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index a8f61a35f..f89882e0d 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -35,6 +35,7 @@ #if CFG_TUSB_MCU == OPT_MCU_STM32F0 #include "stm32f0xx.h" #define FSDEV_PMA_SIZE (1024u) + #define FSDEV_REG_BASE USB_BASE // F0x2 models are crystal-less // All have internal D+ pull-up // 070RB: 2 x 16 bits/word memory LPM Support, BCD Support @@ -193,6 +194,22 @@ // This includes U0 #endif +#if defined(USB_BASE) + #define FSDEV_REG_BASE USB_BASE +#elif defined(USB_DRD_BASE) + #define FSDEV_REG_BASE USB_DRD_BASE +#else + #error "FSDEV_REG_BASE not defined" +#endif + +#ifndef USB_EPTX_STAT +#define USB_EPTX_STAT 0x0030U +#endif + +#ifndef USB_EPRX_STAT +#define USB_EPRX_STAT 0x3000U +#endif + // This checks if the device has "LPM" #if defined(USB_ISTR_L1REQ) #define USB_ISTR_L1REQ_FORCED (USB_ISTR_L1REQ) -- cgit v1.3.1 From f4aaad6869db74a4fba6eeb716d20be85978a311 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 30 Jul 2024 21:35:24 +0700 Subject: add edpt0_open(), slightly update dtog --- src/device/dcd.h | 2 +- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 74 +++++++++++++++------------ src/portable/st/stm32_fsdev/fsdev_common.h | 30 +++++++---- src/portable/st/stm32_fsdev/fsdev_stm32.h | 8 --- 4 files changed, 62 insertions(+), 52 deletions(-) (limited to 'src/portable') diff --git a/src/device/dcd.h b/src/device/dcd.h index b25b47025..41e0fbee3 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -180,7 +180,7 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr); TU_ATTR_WEAK bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size); // Configure and enable an ISO endpoint according to descriptor -TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc); +TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); //--------------------------------------------------------------------+ // Event API (implemented by stack) diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 6007b4a02..834de6998 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -178,6 +178,8 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); +TU_ATTR_UNUSED static void edpt0_open(uint8_t rhport); + //--------------------------------------------------------------------+ // Inline helper //--------------------------------------------------------------------+ @@ -277,19 +279,7 @@ static void handle_bus_reset(uint8_t rhport) { // Reset PMA allocation ep_buf_ptr = FSDEV_BTABLE_BASE + 8 * FSDEV_EP_COUNT; - tusb_desc_endpoint_t ep0_desc = { - .bLength = sizeof(tusb_desc_endpoint_t), - .bDescriptorType = TUSB_DESC_ENDPOINT, - .bEndpointAddress = 0x00, - .bmAttributes = {.xfer = TUSB_XFER_CONTROL}, - .wMaxPacketSize = CFG_TUD_ENDPOINT0_SIZE, - .bInterval = 0 - }; - - dcd_edpt_open(rhport, &ep0_desc); - - ep0_desc.bEndpointAddress = 0x80; - dcd_edpt_open(rhport, &ep0_desc); + edpt0_open(rhport); // open control endpoint (both IN & OUT) USB->DADDR = USB_DADDR_EF; // Enable USB Function } @@ -610,8 +600,32 @@ static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type) TU_ASSERT(0); } -// The STM32F0 doesn't seem to like |= or &= to manipulate the EP#R registers, -// so I'm using the #define from HAL here, instead. +void edpt0_open(uint8_t rhport) { + (void) rhport; + + dcd_ep_alloc(0x0, TUSB_XFER_CONTROL); + dcd_ep_alloc(0x80, TUSB_XFER_CONTROL); + + xfer_status[0][0].max_packet_size = CFG_TUD_ENDPOINT0_SIZE; + xfer_status[0][0].ep_idx = 0; + + xfer_status[0][1].max_packet_size = CFG_TUD_ENDPOINT0_SIZE; + xfer_status[0][1].ep_idx = 0; + + uint16_t pma_addr0 = dcd_pma_alloc(CFG_TUD_ENDPOINT0_SIZE, false); + uint16_t pma_addr1 = dcd_pma_alloc(CFG_TUD_ENDPOINT0_SIZE, false); + + btable_set_addr(0, BTABLE_BUF_RX, pma_addr0); + btable_set_addr(0, BTABLE_BUF_TX, pma_addr1); + + uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; + ep_reg |= USB_EP_CONTROL | USB_EP_CTR_RX | USB_EP_CTR_TX; + ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); + // no need to explicitly set DTOG bits since we aren't masked DTOG bit + + pcd_set_endpoint(USB, 0, ep_reg); +} bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; @@ -626,9 +640,6 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { // Set type switch (desc_ep->bmAttributes.xfer) { - case TUSB_XFER_CONTROL: - ep_reg |= USB_EP_CONTROL; - break; case TUSB_XFER_BULK: ep_reg |= USB_EP_CONTROL; // FIXME should it be bulk? break; @@ -718,35 +729,34 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet btable_set_addr(ep_idx, 0, pma_addr); btable_set_addr(ep_idx, 1, pma_addr2); - pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; + pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); + return true; } -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc) -{ +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; - uint8_t const ep_addr = p_endpoint_desc->bEndpointAddress; + uint8_t const ep_addr = desc_ep->bEndpointAddress; uint8_t const ep_idx = xfer_ctl_ptr(ep_addr)->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - xfer_ctl_ptr(ep_addr)->max_packet_size = tu_edpt_packet_size(p_endpoint_desc); - - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); + xfer_ctl_ptr(ep_addr)->max_packet_size = tu_edpt_packet_size(desc_ep); - pcd_set_ep_address(USB, ep_idx, tu_edpt_number(ep_addr)); - - pcd_clear_tx_dtog(USB, ep_idx); - pcd_clear_rx_dtog(USB, ep_idx); + uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; + ep_reg |= tu_edpt_number(ep_addr) | USB_EP_ISOCHRONOUS | USB_EP_CTR_RX | USB_EP_CTR_TX; + ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_DIS); + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_DIS); + // no need to explicitly set DTOG bits since we aren't masked DTOG bit if (dir == TUSB_DIR_IN) { - pcd_rx_dtog(USB, ep_idx); + ep_reg = ep_add_rx_dtog(ep_reg, 1); } else { - pcd_tx_dtog(USB, ep_idx); + ep_reg = ep_add_tx_dtog(ep_reg, 1); } + pcd_set_endpoint(USB, ep_idx, ep_reg); return true; } diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 3d1e1fe4a..53b2af0a2 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -112,14 +112,6 @@ static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; #endif typedef struct { -// _va32 fsdev_bus_t EP0R; // 00: USB Endpoint 0 register -// _va32 fsdev_bus_t EP1R; // 04: USB Endpoint 1 register -// _va32 fsdev_bus_t EP2R; // 08: USB Endpoint 2 register -// _va32 fsdev_bus_t EP3R; // 0C: USB Endpoint 3 register -// _va32 fsdev_bus_t EP4R; // 10: USB Endpoint 4 register -// _va32 fsdev_bus_t EP5R; // 14: USB Endpoint 5 register -// _va32 fsdev_bus_t EP6R; // 18: USB Endpoint 6 register -// _va32 fsdev_bus_t EP7R; // 1C: USB Endpoint 7 register struct { _va32 fsdev_bus_t reg; }ep[FSDEV_EP_COUNT]; @@ -140,6 +132,22 @@ TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); #define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) +#ifndef USB_EPTX_STAT +#define USB_EPTX_STAT 0x0030U +#endif + +#ifndef USB_EPRX_STAT +#define USB_EPRX_STAT 0x3000U +#endif + +#ifndef USB_EP_DTOG_TX_Pos +#define USB_EP_DTOG_TX_Pos (6U) +#endif + +#ifndef USB_EP_DTOG_RX_Pos +#define USB_EP_DTOG_RX_Pos (14U) +#endif + //--------------------------------------------------------------------+ // BTable //--------------------------------------------------------------------+ @@ -244,7 +252,7 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, regVal &= USB_EPREG_MASK; regVal |= bAddr; regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx,regVal); + pcd_set_endpoint(USBx, bEpIdx, regVal); } TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { @@ -291,11 +299,11 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_status(uint32_t reg, uint } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_dtog(uint32_t reg, uint32_t state) { - return reg | ((reg ^ state) & USB_EP_DTOG_TX); + return reg | ((reg ^ (state << USB_EP_DTOG_TX_Pos)) & USB_EP_DTOG_TX); } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_dtog(uint32_t reg, uint32_t state) { - return reg | ((reg ^ state) & USB_EP_DTOG_RX); + return reg | ((reg ^ (state << USB_EP_DTOG_RX_Pos)) & USB_EP_DTOG_RX); } /** diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index f89882e0d..f20505f28 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -202,14 +202,6 @@ #error "FSDEV_REG_BASE not defined" #endif -#ifndef USB_EPTX_STAT -#define USB_EPTX_STAT 0x0030U -#endif - -#ifndef USB_EPRX_STAT -#define USB_EPRX_STAT 0x3000U -#endif - // This checks if the device has "LPM" #if defined(USB_ISTR_L1REQ) #define USB_ISTR_L1REQ_FORCED (USB_ISTR_L1REQ) -- cgit v1.3.1 From 0c8d41e25ec3f691f3125f634659f52d084e8995 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 09:46:31 +0700 Subject: correct ep toggle bit --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 32 +++++++++------------------ src/portable/st/stm32_fsdev/fsdev_common.h | 8 +++---- 2 files changed, 15 insertions(+), 25 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 834de6998..5cba9ca40 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -350,8 +350,6 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) uint32_t wEPRegVal = pcd_get_endpoint(USB, EPindex); uint8_t ep_addr = wEPRegVal & USB_EPADDR_FIELD; - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); - // Verify the CTR_RX bit is set. This was in the ST Micro code, // but I'm not sure it's actually necessary? if ((wEPRegVal & USB_EP_CTR_RX) == 0U) { @@ -359,34 +357,26 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) } if (wEPRegVal & USB_EP_SETUP) { - /* Setup packet */ uint32_t count = btable_get_count(EPindex, BTABLE_BUF_RX); // Setup packet should always be 8 bytes. If not, ignore it, and try again. if (count == 8) { - // Must reset EP to NAK (in case it had been stalling) - pcd_set_ep_rx_status(USB, 0u, USB_EP_RX_NAK); - pcd_set_ep_tx_status(USB, 0u, USB_EP_TX_NAK); - - // set both data toggle to 1 - uint32_t regVal = pcd_get_endpoint(USB, 0); - if ((regVal & USB_EP_DTOG_TX) == 0) { - pcd_tx_dtog(USB, 0); - } - - if ((regVal & USB_EP_DTOG_RX) == 0) { - pcd_rx_dtog(USB, 0); - } - uint16_t rx_addr = btable_get_addr(EPindex, BTABLE_BUF_RX); #ifdef FSDEV_BUS_32BIT dcd_event_setup_received(0, (uint8_t *)(USB_PMAADDR + rx_addr), true); #else // The setup_received function uses memcpy, so this must first copy the setup data into // user memory, to allow for the 32-bit access that memcpy performs. - uint8_t userMemBuf[8]; + uint32_t userMemBuf[2]; dcd_read_packet_memory(userMemBuf, rx_addr, 8); dcd_event_setup_received(0, (uint8_t*) userMemBuf, true); #endif + + // Reset EP to NAK (in case it had been stalling) + wEPRegVal = ep_add_tx_status(wEPRegVal, USB_EP_TX_NAK); + wEPRegVal = ep_add_rx_status(wEPRegVal, USB_EP_RX_NAK); + wEPRegVal = ep_add_tx_dtog(wEPRegVal, 1); + wEPRegVal = ep_add_rx_dtog(wEPRegVal, 1); + pcd_set_endpoint(USB, 0, wEPRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX); } } else { // Clear RX CTR interrupt flag @@ -394,6 +384,8 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) pcd_clear_rx_ep_ctr(USB, EPindex); } + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); + uint8_t buf_id; if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { // ISO endpoints are double buffered @@ -404,13 +396,11 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) uint32_t count = btable_get_count(EPindex, buf_id); uint16_t addr = (uint16_t) btable_get_addr(EPindex, buf_id); - TU_ASSERT(count <= xfer->max_packet_size, /**/); - if (count != 0U) { if (xfer->ff) { dcd_read_packet_memory_ff(xfer->ff, addr, count); } else { - dcd_read_packet_memory(&(xfer->buffer[xfer->queued_len]), addr, count); + dcd_read_packet_memory(xfer->buffer + xfer->queued_len, addr, count); } xfer->queued_len = (uint16_t)(xfer->queued_len + count); diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 53b2af0a2..09bf4c2ca 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -292,18 +292,18 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_status(uint32_t reg, uint32_t state) { - return reg | ((reg ^ state) & USB_EPTX_STAT); + return reg ^ state; } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_status(uint32_t reg, uint32_t state) { - return reg | ((reg ^ state) & USB_EPRX_STAT); + return reg ^ state; } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_dtog(uint32_t reg, uint32_t state) { - return reg | ((reg ^ (state << USB_EP_DTOG_TX_Pos)) & USB_EP_DTOG_TX); + return reg ^ (state << USB_EP_DTOG_TX_Pos); } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_dtog(uint32_t reg, uint32_t state) { - return reg | ((reg ^ (state << USB_EP_DTOG_RX_Pos)) & USB_EP_DTOG_RX); + return reg ^ (state << USB_EP_DTOG_RX_Pos); } /** -- cgit v1.3.1 From 126778298e6ab23f2117b60d479d31e4de7d276f Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 11:35:09 +0700 Subject: enhance dcd_ep_ctr_rx_handler() --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 128 ++++++++++++-------------- 1 file changed, 58 insertions(+), 70 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 5cba9ca40..c7a25ba5e 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -178,7 +178,7 @@ static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); -TU_ATTR_UNUSED static void edpt0_open(uint8_t rhport); +static void edpt0_open(uint8_t rhport); //--------------------------------------------------------------------+ // Inline helper @@ -285,10 +285,8 @@ static void handle_bus_reset(uint8_t rhport) { } // Handle CTR interrupt for the TX/IN direction -// Upon call, (wIstr & USB_ISTR_DIR) == 0U -static void dcd_ep_ctr_tx_handler(uint32_t wIstr) { - uint32_t EPindex = wIstr & USB_ISTR_EP_ID; - uint32_t wEPRegVal = pcd_get_endpoint(USB, EPindex); +static void dcd_ep_ctr_tx_handler(uint32_t ep_id) { + uint32_t wEPRegVal = pcd_get_endpoint(USB, ep_id); uint8_t ep_addr = (wEPRegVal & USB_EPADDR_FIELD) | TUSB_DIR_IN_MASK; // Verify the CTR_TX bit is set. This was in the ST Micro code, @@ -298,7 +296,7 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) { } /* clear int flag */ - pcd_clear_tx_ep_ctr(USB, EPindex); + pcd_clear_tx_ep_ctr(USB, ep_id); xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); @@ -311,20 +309,18 @@ static void dcd_ep_ctr_tx_handler(uint32_t wIstr) { } xfer->iso_in_sending = false; uint8_t buf_id = (wEPRegVal & USB_EP_DTOG_TX) ? 0 : 1; - btable_set_count(EPindex, buf_id, 0); + btable_set_count(ep_id, buf_id, 0); } if ((xfer->total_len != xfer->queued_len)) { - dcd_transmit_packet(xfer, EPindex); + dcd_transmit_packet(xfer, ep_id); } else { dcd_event_xfer_complete(0, ep_addr, xfer->total_len, XFER_RESULT_SUCCESS, true); } } // Handle CTR interrupt for the RX/OUT direction -// Upon call, (wIstr & USB_ISTR_DIR) == 0U -static void dcd_ep_ctr_rx_handler(uint32_t wIstr) -{ +static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { #ifdef FSDEV_BUS_32BIT /* https://www.st.com/resource/en/errata_sheet/es0561-stm32h503cbebkbrb-device-errata-stmicroelectronics.pdf * From STM32H503 errata 2.15.1: Buffer description table update completes after CTR interrupt triggers @@ -346,103 +342,92 @@ static void dcd_ep_ctr_rx_handler(uint32_t wIstr) } #endif - uint32_t EPindex = wIstr & USB_ISTR_EP_ID; - uint32_t wEPRegVal = pcd_get_endpoint(USB, EPindex); - uint8_t ep_addr = wEPRegVal & USB_EPADDR_FIELD; + uint32_t ep_reg = pcd_get_endpoint(USB, ep_id); + uint8_t ep_addr = ep_reg & USB_EPADDR_FIELD; // Verify the CTR_RX bit is set. This was in the ST Micro code, // but I'm not sure it's actually necessary? - if ((wEPRegVal & USB_EP_CTR_RX) == 0U) { + if ((ep_reg & USB_EP_CTR_RX) == 0U) { return; } - if (wEPRegVal & USB_EP_SETUP) { - uint32_t count = btable_get_count(EPindex, BTABLE_BUF_RX); + // Clear RX CTR and reserved TX CTR + ep_reg = (ep_reg & ~USB_EP_CTR_RX) | USB_EP_CTR_TX; + + if (ep_reg & USB_EP_SETUP) { + uint32_t count = btable_get_count(ep_id, BTABLE_BUF_RX); // Setup packet should always be 8 bytes. If not, ignore it, and try again. if (count == 8) { - uint16_t rx_addr = btable_get_addr(EPindex, BTABLE_BUF_RX); -#ifdef FSDEV_BUS_32BIT - dcd_event_setup_received(0, (uint8_t *)(USB_PMAADDR + rx_addr), true); -#else - // The setup_received function uses memcpy, so this must first copy the setup data into - // user memory, to allow for the 32-bit access that memcpy performs. - uint32_t userMemBuf[2]; - dcd_read_packet_memory(userMemBuf, rx_addr, 8); - dcd_event_setup_received(0, (uint8_t*) userMemBuf, true); -#endif + uint16_t rx_addr = btable_get_addr(ep_id, BTABLE_BUF_RX); + uint32_t setup_packet[2]; + dcd_read_packet_memory(setup_packet, rx_addr, 8); + dcd_event_setup_received(0, (uint8_t*) setup_packet, true); // Reset EP to NAK (in case it had been stalling) - wEPRegVal = ep_add_tx_status(wEPRegVal, USB_EP_TX_NAK); - wEPRegVal = ep_add_rx_status(wEPRegVal, USB_EP_RX_NAK); - wEPRegVal = ep_add_tx_dtog(wEPRegVal, 1); - wEPRegVal = ep_add_rx_dtog(wEPRegVal, 1); - pcd_set_endpoint(USB, 0, wEPRegVal | USB_EP_CTR_RX | USB_EP_CTR_TX); + ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); + ep_reg = ep_add_tx_dtog(ep_reg, 1); + ep_reg = ep_add_rx_dtog(ep_reg, 1); + } else { + ep_reg &= USB_EPREG_MASK; // reversed all toggle } } else { - // Clear RX CTR interrupt flag - if (ep_addr != 0u) { - pcd_clear_rx_ep_ctr(USB, EPindex); - } + ep_reg &= USB_EPRX_STAT | USB_EPREG_MASK; // reversed all toggle except RX Status + bool const is_iso = (ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t buf_id; - if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { - // ISO endpoints are double buffered - buf_id = (wEPRegVal & USB_EP_DTOG_RX) ? 0 : 1; + if (is_iso) { + buf_id = (ep_reg & USB_EP_DTOG_RX) ? 0 : 1; // ISO are double buffered } else { - buf_id = 1; + buf_id = BTABLE_BUF_RX; } - uint32_t count = btable_get_count(EPindex, buf_id); - uint16_t addr = (uint16_t) btable_get_addr(EPindex, buf_id); + uint32_t rx_count = btable_get_count(ep_id, buf_id); + uint16_t pma_addr = (uint16_t) btable_get_addr(ep_id, buf_id); - if (count != 0U) { + if (rx_count != 0) { if (xfer->ff) { - dcd_read_packet_memory_ff(xfer->ff, addr, count); + dcd_read_packet_memory_ff(xfer->ff, pma_addr, rx_count); } else { - dcd_read_packet_memory(xfer->buffer + xfer->queued_len, addr, count); + dcd_read_packet_memory(xfer->buffer + xfer->queued_len, pma_addr, rx_count); } - xfer->queued_len = (uint16_t)(xfer->queued_len + count); + xfer->queued_len = (uint16_t)(xfer->queued_len + rx_count); } - if ((count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len)) { + if ((rx_count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len)) { // all bytes received or short packet dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); + + if (ep_addr == 0u) { + // prepared for status packet + btable_set_rx_bufsize(ep_id, BTABLE_BUF_RX, CFG_TUD_ENDPOINT0_SIZE); + } + + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); } else { - /* Set endpoint active again for receiving more data. - * Note that isochronous endpoints stay active always */ - if ((wEPRegVal & USB_EP_TYPE_MASK) != USB_EP_ISOCHRONOUS) { - uint16_t remaining = xfer->total_len - xfer->queued_len; - uint16_t cnt = tu_min16(remaining, xfer->max_packet_size); - btable_set_rx_bufsize(EPindex, BTABLE_BUF_RX, cnt); + // Set endpoint active again for receiving more data. Note that isochronous endpoints stay active always + if (!is_iso) { + uint16_t const cnt = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); + btable_set_rx_bufsize(ep_id, BTABLE_BUF_RX, cnt); } - pcd_set_ep_rx_status(USB, EPindex, USB_EP_RX_VALID); + ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_VALID); } } - // For EP0, prepare to receive another SETUP packet. - // Clear CTR last so that a new packet does not overwrite the packing being read. - // (Based on the docs, it seems SETUP will always be accepted after CTR is cleared) - if (ep_addr == 0u) { - // Always be prepared for a status packet... - btable_set_rx_bufsize(EPindex, BTABLE_BUF_RX, CFG_TUD_ENDPOINT0_SIZE); - pcd_clear_rx_ep_ctr(USB, EPindex); - } + pcd_set_endpoint(USB, ep_id, ep_reg); } -static void dcd_ep_ctr_handler(void) -{ +static void dcd_ep_ctr_handler(void) { uint32_t wIstr; - /* stay in loop while pending interrupts */ while (((wIstr = USB->ISTR) & USB_ISTR_CTR) != 0U) { + uint32_t ep_id = wIstr & USB_ISTR_EP_ID; if ((wIstr & USB_ISTR_DIR) == 0U) { - /* TX/IN */ - dcd_ep_ctr_tx_handler(wIstr); + dcd_ep_ctr_tx_handler(ep_id); // TX/IN } else { - /* RX/OUT*/ - dcd_ep_ctr_rx_handler(wIstr); + dcd_ep_ctr_rx_handler(ep_id); // RX/OUT } } } @@ -609,11 +594,14 @@ void edpt0_open(uint8_t rhport) { btable_set_addr(0, BTABLE_BUF_TX, pma_addr1); uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; - ep_reg |= USB_EP_CONTROL | USB_EP_CTR_RX | USB_EP_CTR_TX; + ep_reg |= USB_EP_CONTROL; // | USB_EP_CTR_RX | USB_EP_CTR_TX; ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); // no need to explicitly set DTOG bits since we aren't masked DTOG bit + // prepare for setup packet + btable_set_rx_bufsize(0, BTABLE_BUF_RX, CFG_TUD_ENDPOINT0_SIZE); + pcd_set_endpoint(USB, 0, ep_reg); } -- cgit v1.3.1 From e60efec6b71701946677440629437bedbd5bef9b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 12:09:50 +0700 Subject: improve using ep_add_status/ep_add_dtog --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 68 +++++++++------------------ src/portable/st/stm32_fsdev/fsdev_common.h | 26 +++++----- 2 files changed, 37 insertions(+), 57 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index c7a25ba5e..c1d550ea8 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -364,10 +364,11 @@ static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { dcd_event_setup_received(0, (uint8_t*) setup_packet, true); // Reset EP to NAK (in case it had been stalling) - ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); - ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); - ep_reg = ep_add_tx_dtog(ep_reg, 1); - ep_reg = ep_add_rx_dtog(ep_reg, 1); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_IN, EP_STAT_NAK); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_OUT, EP_STAT_NAK); + + ep_reg = ep_add_dtog(ep_reg, TUSB_DIR_IN, 1); + ep_reg = ep_add_dtog(ep_reg, TUSB_DIR_OUT, 1); } else { ep_reg &= USB_EPREG_MASK; // reversed all toggle } @@ -404,15 +405,14 @@ static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { // prepared for status packet btable_set_rx_bufsize(ep_id, BTABLE_BUF_RX, CFG_TUD_ENDPOINT0_SIZE); } - - ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_OUT, EP_STAT_NAK); } else { // Set endpoint active again for receiving more data. Note that isochronous endpoints stay active always if (!is_iso) { uint16_t const cnt = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); btable_set_rx_bufsize(ep_id, BTABLE_BUF_RX, cnt); } - ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_VALID); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_OUT, EP_STAT_VALID); } } @@ -594,9 +594,9 @@ void edpt0_open(uint8_t rhport) { btable_set_addr(0, BTABLE_BUF_TX, pma_addr1); uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; - ep_reg |= USB_EP_CONTROL; // | USB_EP_CTR_RX | USB_EP_CTR_TX; - ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); - ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); + ep_reg |= USB_EP_CONTROL; + ep_reg = ep_add_status(ep_reg, TUSB_DIR_IN, EP_STAT_NAK); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_OUT, EP_STAT_NAK); // no need to explicitly set DTOG bits since we aren't masked DTOG bit // prepare for setup packet @@ -637,15 +637,16 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { xfer_ctl_ptr(ep_addr)->max_packet_size = packet_size; xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; + ep_reg = ep_add_status(ep_reg, dir, EP_STAT_NAK); + ep_reg = ep_add_dtog(ep_reg, dir, 0); + + // reserve other direction toggle bits if (dir == TUSB_DIR_IN) { - ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_NAK); - ep_reg = ep_add_tx_dtog(ep_reg, 0); ep_reg &= ~(USB_EPRX_STAT | USB_EP_DTOG_RX); } else { - ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_NAK); - ep_reg = ep_add_rx_dtog(ep_reg, 0); ep_reg &= ~(USB_EPTX_STAT | USB_EP_DTOG_TX); } + pcd_set_endpoint(USB, ep_idx, ep_reg); return true; @@ -669,28 +670,6 @@ void dcd_edpt_close_all(uint8_t rhport) ep_buf_ptr = FSDEV_BTABLE_BASE + 8 * CFG_TUD_ENDPPOINT_MAX + 2 * CFG_TUD_ENDPOINT0_SIZE; } -/** - * Close an endpoint. - * - * This function may be called with interrupts enabled or disabled. - * - * This also clears transfers in progress, should there be any. - */ -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - (void)rhport; - - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); - uint8_t const ep_idx = xfer->ep_idx; - uint8_t const dir = tu_edpt_dir(ep_addr); - - if (dir == TUSB_DIR_IN) { - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_DIS); - } else { - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_DIS); - } -} - bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void)rhport; @@ -724,15 +703,11 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; ep_reg |= tu_edpt_number(ep_addr) | USB_EP_ISOCHRONOUS | USB_EP_CTR_RX | USB_EP_CTR_TX; - ep_reg = ep_add_tx_status(ep_reg, USB_EP_TX_DIS); - ep_reg = ep_add_rx_status(ep_reg, USB_EP_RX_DIS); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_IN, EP_STAT_DISABLED); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); - // no need to explicitly set DTOG bits since we aren't masked DTOG bit - if (dir == TUSB_DIR_IN) { - ep_reg = ep_add_rx_dtog(ep_reg, 1); - } else { - ep_reg = ep_add_tx_dtog(ep_reg, 1); - } + ep_add_dtog(ep_reg, dir, 0); + ep_add_dtog(ep_reg, 1-dir, 1); pcd_set_endpoint(USB, ep_idx, ep_reg); @@ -838,14 +813,15 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) } } -void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) -{ +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); +// uint32_t ep_reg = pcd_get_endpoint(USB, ep_idx); + if (dir == TUSB_DIR_IN) { // IN if (pcd_get_eptype(USB, ep_idx) != USB_EP_ISOCHRONOUS) { pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 09bf4c2ca..676596c73 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -140,6 +140,10 @@ TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); #define USB_EPRX_STAT 0x3000U #endif +#ifndef USB_EPTX_STAT_Pos +#define USB_EPTX_STAT_Pos (4U) +#endif + #ifndef USB_EP_DTOG_TX_Pos #define USB_EP_DTOG_TX_Pos (6U) #endif @@ -148,6 +152,13 @@ TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); #define USB_EP_DTOG_RX_Pos (14U) #endif +typedef enum { + EP_STAT_DISABLED = 0, + EP_STAT_STALL = 1, + EP_STAT_NAK = 2, + EP_STAT_VALID = 3 +}ep_stat_t; + //--------------------------------------------------------------------+ // BTable //--------------------------------------------------------------------+ @@ -291,19 +302,12 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, pcd_set_endpoint(USBx, bEpIdx,regVal); } -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_status(uint32_t reg, uint32_t state) { - return reg ^ state; -} -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_status(uint32_t reg, uint32_t state) { - return reg ^ state; -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_tx_dtog(uint32_t reg, uint32_t state) { - return reg ^ (state << USB_EP_DTOG_TX_Pos); +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_status(uint32_t reg, tusb_dir_t dir, ep_stat_t state) { + return reg ^ (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); } -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_rx_dtog(uint32_t reg, uint32_t state) { - return reg ^ (state << USB_EP_DTOG_RX_Pos); +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_dtog(uint32_t reg, tusb_dir_t dir, uint8_t state) { + return reg ^ (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); } /** -- cgit v1.3.1 From 76cc721e8f508a02f6d4f5a1f27b24ffb9a63b7b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 12:44:02 +0700 Subject: clean up dcd_edpt_stall/clear_statll --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 53 ++++++++----------- src/portable/st/stm32_fsdev/fsdev_common.h | 75 +++------------------------ 2 files changed, 28 insertions(+), 100 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index c1d550ea8..1d3d8cd96 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -375,7 +375,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { } else { ep_reg &= USB_EPRX_STAT | USB_EPREG_MASK; // reversed all toggle except RX Status - bool const is_iso = (ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; + bool const is_iso = ep_is_iso(ep_reg); xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t buf_id; @@ -748,9 +748,8 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { dcd_int_enable(0); } -static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) -{ - (void)rhport; +static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { + (void) rhport; xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; @@ -762,7 +761,7 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) uint32_t cnt = (uint32_t) tu_min16(xfer->total_len, xfer->max_packet_size); uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx); - if ((ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + if (ep_is_iso(ep_reg)) { btable_set_rx_bufsize(ep_idx, 0, cnt); btable_set_rx_bufsize(ep_idx, 1, cnt); } else { @@ -775,10 +774,8 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) return true; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) -{ +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); - xfer->buffer = buffer; xfer->ff = NULL; xfer->total_len = total_bytes; @@ -787,8 +784,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t to return edpt_xfer(rhport, ep_addr); } -bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes) -{ +bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes) { xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); xfer->buffer = NULL; xfer->ff = ff; @@ -798,19 +794,19 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t return edpt_xfer(rhport, ep_addr); } -void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) -{ +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - if (dir == TUSB_DIR_IN) { - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_STALL); - } else { - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_STALL); - } + uint32_t ep_reg = pcd_get_endpoint(USB, ep_idx); + ep_reg |= USB_EP_CTR_RX | USB_EP_CTR_TX; // reserve CTR bits + ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir); + ep_reg = ep_add_status(ep_reg, dir, EP_STAT_STALL); + + pcd_set_endpoint(USB, ep_idx, ep_reg); } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { @@ -819,23 +815,16 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); + uint32_t ep_reg = pcd_get_endpoint(USB, ep_idx); + ep_reg |= USB_EP_CTR_RX | USB_EP_CTR_TX; // reserve CTR bits + ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir) | EP_DTOG_MASK(dir); -// uint32_t ep_reg = pcd_get_endpoint(USB, ep_idx); - - if (dir == TUSB_DIR_IN) { // IN - if (pcd_get_eptype(USB, ep_idx) != USB_EP_ISOCHRONOUS) { - pcd_set_ep_tx_status(USB, ep_idx, USB_EP_TX_NAK); - } - - /* Reset to DATA0 if clearing stall condition. */ - pcd_clear_tx_dtog(USB, ep_idx); - } else { // OUT - if (pcd_get_eptype(USB, ep_idx) != USB_EP_ISOCHRONOUS) { - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_NAK); - } - /* Reset to DATA0 if clearing stall condition. */ - pcd_clear_rx_dtog(USB, ep_idx); + if (!ep_is_iso(ep_reg)) { + ep_reg = ep_add_status(ep_reg, dir, EP_STAT_NAK); } + ep_reg = ep_add_dtog(ep_reg, dir, 0); // Reset to DATA0 + + pcd_set_endpoint(USB, ep_idx, ep_reg); } #ifdef FSDEV_BUS_32BIT diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 676596c73..3b14c0334 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -159,6 +159,9 @@ typedef enum { EP_STAT_VALID = 3 }ep_stat_t; +#define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) +#define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) + //--------------------------------------------------------------------+ // BTable //--------------------------------------------------------------------+ @@ -274,26 +277,6 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint pcd_set_endpoint(USBx, bEpIdx, regVal); } -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_eptype(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EP_T_FIELD; - return regVal; -} - -/** - * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal &= ~USB_EP_CTR_RX; - regVal |= USB_EP_CTR_TX; // preserve CTR_TX (clears on writing 0) - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); regVal &= USB_EPREG_MASK; @@ -310,6 +293,10 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_dtog(uint32_t reg, tusb_dir_ return reg ^ (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); } +TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { + return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; +} + /** * @brief sets the status for tx transfer (bits STAT_TX[1:0]). * @param USBx USB peripheral instance register address. @@ -341,54 +328,6 @@ TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx pcd_set_endpoint(USBx, bEpIdx, regVal); } -//TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx) { -// uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); -// return (regVal & USB_EPRX_STAT) >> (12u); -//} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_rx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - if((regVal & USB_EP_DTOG_RX) != 0) { - pcd_rx_dtog(USBx,bEpIdx); - } -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_dtog(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - if((regVal & USB_EP_DTOG_TX) != 0) { - pcd_tx_dtog(USBx,bEpIdx); - } -} - -//TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { -// uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); -// regVal |= USB_EP_KIND; -// regVal &= USB_EPREG_MASK; -// regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; -// pcd_set_endpoint(USBx, bEpIdx, regVal); -//} -// -//TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_ep_kind(USB_TypeDef * USBx, uint32_t bEpIdx) { -// uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); -// regVal &= USB_EPKIND_MASK; -// regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; -// pcd_set_endpoint(USBx, bEpIdx, regVal); -//} - #ifdef __cplusplus } #endif -- cgit v1.3.1 From 8139840d7ace72be6829eb1b879747ac5352cc31 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 15:32:37 +0700 Subject: fix ep_add_dtog() --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 5 ++--- src/portable/st/stm32_fsdev/fsdev_common.h | 17 +++-------------- 2 files changed, 5 insertions(+), 17 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 1d3d8cd96..6d185ced1 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -705,9 +705,8 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) ep_reg |= tu_edpt_number(ep_addr) | USB_EP_ISOCHRONOUS | USB_EP_CTR_RX | USB_EP_CTR_TX; ep_reg = ep_add_status(ep_reg, TUSB_DIR_IN, EP_STAT_DISABLED); ep_reg = ep_add_status(ep_reg, TUSB_DIR_OUT, EP_STAT_DISABLED); - - ep_add_dtog(ep_reg, dir, 0); - ep_add_dtog(ep_reg, 1-dir, 1); + ep_reg = ep_add_dtog(ep_reg, dir, 0); + ep_reg = ep_add_dtog(ep_reg, 1-dir, 1); pcd_set_endpoint(USB, ep_idx, ep_reg); diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 3b14c0334..73dc070ed 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -254,20 +254,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx return FSDEV_REG->ep[bEpIdx].reg; } -/** - * @brief Sets address in an endpoint register. - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param bAddr Address. - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_address(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t bAddr) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal |= bAddr; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} +//TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value) { +// FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; +//} TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); -- cgit v1.3.1 From 3156f1c4a75e0aa7d506631a50da41ea7f38280d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 16:52:00 +0700 Subject: remove all pcd ep read, modify write --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 63 ++++++++++----------- src/portable/st/stm32_fsdev/fsdev_common.h | 79 ++++++++------------------- 2 files changed, 52 insertions(+), 90 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 6d185ced1..58de125d9 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -286,21 +286,15 @@ static void handle_bus_reset(uint8_t rhport) { // Handle CTR interrupt for the TX/IN direction static void dcd_ep_ctr_tx_handler(uint32_t ep_id) { - uint32_t wEPRegVal = pcd_get_endpoint(USB, ep_id); - uint8_t ep_addr = (wEPRegVal & USB_EPADDR_FIELD) | TUSB_DIR_IN_MASK; + uint32_t ep_reg = pcd_get_endpoint(USB, ep_id) & USB_EPREG_MASK; - // Verify the CTR_TX bit is set. This was in the ST Micro code, - // but I'm not sure it's actually necessary? - if ((wEPRegVal & USB_EP_CTR_TX) == 0U) { - return; - } - - /* clear int flag */ - pcd_clear_tx_ep_ctr(USB, ep_id); + // Verify the CTR bit is set. This was in the ST Micro code, but I'm not sure it's actually necessary? + TU_VERIFY(ep_reg & USB_EP_CTR_TX, ); + uint8_t ep_addr = (ep_reg & USB_EPADDR_FIELD) | TUSB_DIR_IN_MASK; xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); - if ((wEPRegVal & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS) { + if (ep_is_iso(ep_reg)) { // Ignore spurious interrupts that we don't schedule // host can send IN token while there is no data to send, since ISO does not have NAK // this will result to zero length packet --> trigger interrupt (which cannot be masked) @@ -308,14 +302,19 @@ static void dcd_ep_ctr_tx_handler(uint32_t ep_id) { return; } xfer->iso_in_sending = false; - uint8_t buf_id = (wEPRegVal & USB_EP_DTOG_TX) ? 0 : 1; + uint8_t buf_id = (ep_reg & USB_EP_DTOG_TX) ? 0 : 1; btable_set_count(ep_id, buf_id, 0); } - if ((xfer->total_len != xfer->queued_len)) { - dcd_transmit_packet(xfer, ep_id); + if (xfer->total_len != xfer->queued_len) { + dcd_transmit_packet(xfer, ep_id); // also clear CTR bit } else { dcd_event_xfer_complete(0, ep_addr, xfer->total_len, XFER_RESULT_SUCCESS, true); + + // Clear CTR TX and reserved CTR RX + ep_reg = (ep_reg & ~USB_EP_CTR_TX) | USB_EP_CTR_RX; + + pcd_set_endpoint(USB, ep_id, ep_reg); } } @@ -343,15 +342,13 @@ static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { #endif uint32_t ep_reg = pcd_get_endpoint(USB, ep_id); - uint8_t ep_addr = ep_reg & USB_EPADDR_FIELD; - // Verify the CTR_RX bit is set. This was in the ST Micro code, - // but I'm not sure it's actually necessary? - if ((ep_reg & USB_EP_CTR_RX) == 0U) { - return; - } + // Verify the CTR bit is set. This was in the ST Micro code, but I'm not sure it's actually necessary? + TU_VERIFY(ep_reg & USB_EP_CTR_RX, ); - // Clear RX CTR and reserved TX CTR + uint8_t const ep_addr = ep_reg & USB_EPADDR_FIELD; + + // Clear CTR RX and reserved CTR TX ep_reg = (ep_reg & ~USB_EP_CTR_RX) | USB_EP_CTR_TX; if (ep_reg & USB_EP_SETUP) { @@ -688,8 +685,6 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet btable_set_addr(ep_idx, 1, pma_addr2); xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; - pcd_set_eptype(USB, ep_idx, USB_EP_ISOCHRONOUS); - return true; } @@ -715,13 +710,9 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) // Currently, single-buffered, and only 64 bytes at a time (max) static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { - uint16_t len = (uint16_t)(xfer->total_len - xfer->queued_len); - if (len > xfer->max_packet_size) { - len = xfer->max_packet_size; - } - - uint16_t ep_reg = pcd_get_endpoint(USB, ep_ix); - bool const is_iso = (ep_reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; + uint16_t len = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); + uint16_t ep_reg = pcd_get_endpoint(USB, ep_ix) | EP_CTR_TXRX; + bool const is_iso = ep_is_iso(ep_reg); uint8_t buf_id; if (is_iso) { @@ -739,8 +730,12 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { } xfer->queued_len = (uint16_t)(xfer->queued_len + len); + ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(TUSB_DIR_IN); + ep_reg = ep_add_status(ep_reg, TUSB_DIR_IN, EP_STAT_VALID); + ep_reg = ep_clear_ctr(ep_reg, TUSB_DIR_IN); + dcd_int_disable(0); - pcd_set_ep_tx_status(USB, ep_ix, USB_EP_TX_VALID); + pcd_set_endpoint(USB, ep_ix, ep_reg); if (is_iso) { xfer->iso_in_sending = true; } @@ -758,7 +753,9 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { dcd_transmit_packet(xfer, ep_idx); } else { uint32_t cnt = (uint32_t) tu_min16(xfer->total_len, xfer->max_packet_size); - uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx); + uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx) | USB_EP_CTR_TX; + ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir); // keep CTR TX, clear CTR RX + ep_reg = ep_add_status(ep_reg, dir, EP_STAT_VALID); if (ep_is_iso(ep_reg)) { btable_set_rx_bufsize(ep_idx, 0, cnt); @@ -767,7 +764,7 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { btable_set_rx_bufsize(ep_idx, BTABLE_BUF_RX, cnt); } - pcd_set_ep_rx_status(USB, ep_idx, USB_EP_RX_VALID); + pcd_set_endpoint(USB, ep_idx, ep_reg); } return true; diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 73dc070ed..67ee72d0e 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -141,17 +141,20 @@ TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); #endif #ifndef USB_EPTX_STAT_Pos -#define USB_EPTX_STAT_Pos (4U) +#define USB_EPTX_STAT_Pos 4u #endif #ifndef USB_EP_DTOG_TX_Pos -#define USB_EP_DTOG_TX_Pos (6U) +#define USB_EP_DTOG_TX_Pos 6u #endif -#ifndef USB_EP_DTOG_RX_Pos -#define USB_EP_DTOG_RX_Pos (14U) +#ifndef USB_EP_CTR_TX_Pos +#define USB_EP_CTR_TX_Pos 7u #endif + +#define EP_CTR_TXRX (USB_EP_CTR_TX | USB_EP_CTR_RX) + typedef enum { EP_STAT_DISABLED = 0, EP_STAT_STALL = 1, @@ -244,34 +247,23 @@ TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, u // Endpoint //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wRegValue) { +TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t ep_id, uint32_t value) { (void) USBx; - FSDEV_REG->ep[bEpIdx].reg = (fsdev_bus_t) wRegValue; + FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; } -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t bEpIdx) { - (void) USBx; - return FSDEV_REG->ep[bEpIdx].reg; -} - -//TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value) { +// write ep register with clear CTR_RX and CTR_TX mask (0 is no clear) +//TU_ATTR_ALWAYS_INLINE static inline void ep_write_with_clear_ctr(uint32_t ep_id, uint32_t value, uint32_t clear_ctr_mask) { +// value |= USB_EP_CTR_RX | USB_EP_CTR_TX; +// if (clear_ctr_mask) { +// value &= ~clear_ctr_mask; +// } // FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; //} -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_eptype(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wType) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= (uint32_t)USB_EP_T_MASK; - regVal |= wType; - regVal |= USB_EP_CTR_RX | USB_EP_CTR_TX; // These clear on write0, so must set high - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -TU_ATTR_ALWAYS_INLINE static inline void pcd_clear_tx_ep_ctr(USB_TypeDef * USBx, uint32_t bEpIdx) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPREG_MASK; - regVal &= ~USB_EP_CTR_TX; - regVal |= USB_EP_CTR_RX; // preserve CTR_RX (clears on writing 0) - pcd_set_endpoint(USBx, bEpIdx,regVal); +TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t ep_id) { + (void) USBx; + return FSDEV_REG->ep[ep_id].reg; } TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_status(uint32_t reg, tusb_dir_t dir, ep_stat_t state) { @@ -282,39 +274,12 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_dtog(uint32_t reg, tusb_dir_ return reg ^ (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); } -TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { - return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_clear_ctr(uint32_t reg, tusb_dir_t dir) { + return reg & ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); } -/** - * @brief sets the status for tx transfer (bits STAT_TX[1:0]). - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param wState new state - * @retval None - */ -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_tx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPTX_DTOGMASK; - regVal ^= wState; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); -} - -/** - * @brief sets the status for rx transfer (bits STAT_TX[1:0]) - * @param USBx USB peripheral instance register address. - * @param bEpIdx Endpoint Number. - * @param wState new state - * @retval None - */ - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_ep_rx_status(USB_TypeDef * USBx, uint32_t bEpIdx, uint32_t wState) { - uint32_t regVal = pcd_get_endpoint(USBx, bEpIdx); - regVal &= USB_EPRX_DTOGMASK; - regVal ^= wState; - regVal |= USB_EP_CTR_RX|USB_EP_CTR_TX; - pcd_set_endpoint(USBx, bEpIdx, regVal); +TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { + return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; } #ifdef __cplusplus -- cgit v1.3.1 From ee831d27ac692d33ea6240b8bce24dc98f3bf74b Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 16:53:16 +0700 Subject: rename to ep_read/write(), drop USBx argument --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 34 ++++++------ src/portable/st/stm32_fsdev/fsdev_common.h | 76 +++++++++++++-------------- 2 files changed, 54 insertions(+), 56 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 58de125d9..47b3264b1 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -227,7 +227,7 @@ void dcd_init(uint8_t rhport) { // Reset endpoints to disabled for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // This doesn't clear all bits since some bits are "toggle", but does set the type to DISABLED. - pcd_set_endpoint(USB, i, 0u); + ep_write(i, 0u); } USB->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; @@ -286,7 +286,7 @@ static void handle_bus_reset(uint8_t rhport) { // Handle CTR interrupt for the TX/IN direction static void dcd_ep_ctr_tx_handler(uint32_t ep_id) { - uint32_t ep_reg = pcd_get_endpoint(USB, ep_id) & USB_EPREG_MASK; + uint32_t ep_reg = ep_read(ep_id) & USB_EPREG_MASK; // Verify the CTR bit is set. This was in the ST Micro code, but I'm not sure it's actually necessary? TU_VERIFY(ep_reg & USB_EP_CTR_TX, ); @@ -314,7 +314,7 @@ static void dcd_ep_ctr_tx_handler(uint32_t ep_id) { // Clear CTR TX and reserved CTR RX ep_reg = (ep_reg & ~USB_EP_CTR_TX) | USB_EP_CTR_RX; - pcd_set_endpoint(USB, ep_id, ep_reg); + ep_write(ep_id, ep_reg); } } @@ -341,7 +341,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { } #endif - uint32_t ep_reg = pcd_get_endpoint(USB, ep_id); + uint32_t ep_reg = ep_read(ep_id); // Verify the CTR bit is set. This was in the ST Micro code, but I'm not sure it's actually necessary? TU_VERIFY(ep_reg & USB_EP_CTR_RX, ); @@ -413,7 +413,7 @@ static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { } } - pcd_set_endpoint(USB, ep_id, ep_reg); + ep_write(ep_id, ep_reg); } static void dcd_ep_ctr_handler(void) { @@ -599,7 +599,7 @@ void edpt0_open(uint8_t rhport) { // prepare for setup packet btable_set_rx_bufsize(0, BTABLE_BUF_RX, CFG_TUD_ENDPOINT0_SIZE); - pcd_set_endpoint(USB, 0, ep_reg); + ep_write(0, ep_reg); } bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { @@ -644,7 +644,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { ep_reg &= ~(USB_EPTX_STAT | USB_EP_DTOG_TX); } - pcd_set_endpoint(USB, ep_idx, ep_reg); + ep_write(ep_idx, ep_reg); return true; } @@ -655,7 +655,7 @@ void dcd_edpt_close_all(uint8_t rhport) for (uint32_t i = 1; i < FSDEV_EP_COUNT; i++) { // Reset endpoint - pcd_set_endpoint(USB, i, 0); + ep_write(i, 0); // Clear EP allocation status ep_alloc_status[i].ep_num = 0xFF; ep_alloc_status[i].ep_type = 0xFF; @@ -703,7 +703,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) ep_reg = ep_add_dtog(ep_reg, dir, 0); ep_reg = ep_add_dtog(ep_reg, 1-dir, 1); - pcd_set_endpoint(USB, ep_idx, ep_reg); + ep_write(ep_idx, ep_reg); return true; } @@ -711,7 +711,7 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) // Currently, single-buffered, and only 64 bytes at a time (max) static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { uint16_t len = tu_min16(xfer->total_len - xfer->queued_len, xfer->max_packet_size); - uint16_t ep_reg = pcd_get_endpoint(USB, ep_ix) | EP_CTR_TXRX; + uint16_t ep_reg = ep_read(ep_ix) | EP_CTR_TXRX; bool const is_iso = ep_is_iso(ep_reg); uint8_t buf_id; @@ -735,7 +735,7 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { ep_reg = ep_clear_ctr(ep_reg, TUSB_DIR_IN); dcd_int_disable(0); - pcd_set_endpoint(USB, ep_ix, ep_reg); + ep_write(ep_ix, ep_reg); if (is_iso) { xfer->iso_in_sending = true; } @@ -753,7 +753,7 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { dcd_transmit_packet(xfer, ep_idx); } else { uint32_t cnt = (uint32_t) tu_min16(xfer->total_len, xfer->max_packet_size); - uint16_t ep_reg = pcd_get_endpoint(USB, ep_idx) | USB_EP_CTR_TX; + uint16_t ep_reg = ep_read(ep_idx) | USB_EP_CTR_TX; ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir); // keep CTR TX, clear CTR RX ep_reg = ep_add_status(ep_reg, dir, EP_STAT_VALID); @@ -764,7 +764,7 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { btable_set_rx_bufsize(ep_idx, BTABLE_BUF_RX, cnt); } - pcd_set_endpoint(USB, ep_idx, ep_reg); + ep_write(ep_idx, ep_reg); } return true; @@ -797,12 +797,12 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - uint32_t ep_reg = pcd_get_endpoint(USB, ep_idx); + uint32_t ep_reg = ep_read(ep_idx); ep_reg |= USB_EP_CTR_RX | USB_EP_CTR_TX; // reserve CTR bits ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir); ep_reg = ep_add_status(ep_reg, dir, EP_STAT_STALL); - pcd_set_endpoint(USB, ep_idx, ep_reg); + ep_write(ep_idx, ep_reg); } void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { @@ -811,7 +811,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); uint8_t const ep_idx = xfer->ep_idx; uint8_t const dir = tu_edpt_dir(ep_addr); - uint32_t ep_reg = pcd_get_endpoint(USB, ep_idx); + uint32_t ep_reg = ep_read(ep_idx); ep_reg |= USB_EP_CTR_RX | USB_EP_CTR_TX; // reserve CTR bits ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir) | EP_DTOG_MASK(dir); @@ -820,7 +820,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { } ep_reg = ep_add_dtog(ep_reg, dir, 0); // Reset to DATA0 - pcd_set_endpoint(USB, ep_idx, ep_reg); + ep_write(ep_idx, ep_reg); } #ifdef FSDEV_BUS_32BIT diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 67ee72d0e..4ada26895 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -165,6 +165,43 @@ typedef enum { #define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) #define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) +//--------------------------------------------------------------------+ +// Endpoint +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value) { + FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; +} + +// write ep register with clear CTR_RX and CTR_TX mask (0 is no clear) +//TU_ATTR_ALWAYS_INLINE static inline void ep_write_with_clear_ctr(uint32_t ep_id, uint32_t value, uint32_t clear_ctr_mask) { +// value |= USB_EP_CTR_RX | USB_EP_CTR_TX; +// if (clear_ctr_mask) { +// value &= ~clear_ctr_mask; +// } +// FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; +//} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_read(uint32_t ep_id) { + return FSDEV_REG->ep[ep_id].reg; +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_status(uint32_t reg, tusb_dir_t dir, ep_stat_t state) { + return reg ^ (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_dtog(uint32_t reg, tusb_dir_t dir, uint8_t state) { + return reg ^ (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_clear_ctr(uint32_t reg, tusb_dir_t dir) { + return reg & ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { + return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; +} + //--------------------------------------------------------------------+ // BTable //--------------------------------------------------------------------+ @@ -243,45 +280,6 @@ TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, u #endif } -//--------------------------------------------------------------------+ -// Endpoint -//--------------------------------------------------------------------+ - -TU_ATTR_ALWAYS_INLINE static inline void pcd_set_endpoint(USB_TypeDef * USBx, uint32_t ep_id, uint32_t value) { - (void) USBx; - FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; -} - -// write ep register with clear CTR_RX and CTR_TX mask (0 is no clear) -//TU_ATTR_ALWAYS_INLINE static inline void ep_write_with_clear_ctr(uint32_t ep_id, uint32_t value, uint32_t clear_ctr_mask) { -// value |= USB_EP_CTR_RX | USB_EP_CTR_TX; -// if (clear_ctr_mask) { -// value &= ~clear_ctr_mask; -// } -// FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; -//} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t pcd_get_endpoint(USB_TypeDef * USBx, uint32_t ep_id) { - (void) USBx; - return FSDEV_REG->ep[ep_id].reg; -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_status(uint32_t reg, tusb_dir_t dir, ep_stat_t state) { - return reg ^ (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_dtog(uint32_t reg, tusb_dir_t dir, uint8_t state) { - return reg ^ (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_clear_ctr(uint32_t reg, tusb_dir_t dir) { - return reg & ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { - return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; -} - #ifdef __cplusplus } #endif -- cgit v1.3.1 From ce0fdc56097efda926c2c3776eec345c920b6cc6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 17:10:43 +0700 Subject: refactor dcd_ep_ctr_handler --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 37 +++++++++++---------------- src/portable/st/stm32_fsdev/fsdev_common.h | 2 ++ 2 files changed, 17 insertions(+), 22 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 47b3264b1..381dfdd94 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -166,7 +166,6 @@ static uint8_t remoteWakeCountdown; // When wake is requested static void handle_bus_reset(uint8_t rhport); static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix); static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr); -static void dcd_ep_ctr_handler(void); // PMA allocation/access static uint16_t ep_buf_ptr; ///< Points to first free memory location @@ -285,7 +284,7 @@ static void handle_bus_reset(uint8_t rhport) { } // Handle CTR interrupt for the TX/IN direction -static void dcd_ep_ctr_tx_handler(uint32_t ep_id) { +static void handle_ctr_tx(uint32_t ep_id) { uint32_t ep_reg = ep_read(ep_id) & USB_EPREG_MASK; // Verify the CTR bit is set. This was in the ST Micro code, but I'm not sure it's actually necessary? @@ -319,7 +318,7 @@ static void dcd_ep_ctr_tx_handler(uint32_t ep_id) { } // Handle CTR interrupt for the RX/OUT direction -static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { +static void handle_ctr_rx(uint32_t ep_id) { #ifdef FSDEV_BUS_32BIT /* https://www.st.com/resource/en/errata_sheet/es0561-stm32h503cbebkbrb-device-errata-stmicroelectronics.pdf * From STM32H503 errata 2.15.1: Buffer description table update completes after CTR interrupt triggers @@ -416,19 +415,6 @@ static void dcd_ep_ctr_rx_handler(uint32_t ep_id) { ep_write(ep_id, ep_reg); } -static void dcd_ep_ctr_handler(void) { - uint32_t wIstr; - /* stay in loop while pending interrupts */ - while (((wIstr = USB->ISTR) & USB_ISTR_CTR) != 0U) { - uint32_t ep_id = wIstr & USB_ISTR_EP_ID; - if ((wIstr & USB_ISTR_DIR) == 0U) { - dcd_ep_ctr_tx_handler(ep_id); // TX/IN - } else { - dcd_ep_ctr_rx_handler(ep_id); // RX/OUT - } - } -} - void dcd_int_handler(uint8_t rhport) { uint32_t int_status = USB->ISTR; // const uint32_t handled_ints = USB_ISTR_CTR | USB_ISTR_RESET | USB_ISTR_WKUP @@ -453,12 +439,6 @@ void dcd_int_handler(uint8_t rhport) { return; // Don't do the rest of the things here; perhaps they've been cleared? } - if (int_status & USB_ISTR_CTR) { - /* servicing of the endpoint correct transfer interrupt */ - /* clear of the CTR flag into the sub */ - dcd_ep_ctr_handler(); - } - if (int_status & USB_ISTR_WKUP) { USB->CNTR &= ~USB_CNTR_LPMODE; USB->CNTR &= ~USB_CNTR_FSUSP; @@ -489,6 +469,19 @@ void dcd_int_handler(uint8_t rhport) { } USB->ISTR = (fsdev_bus_t)~USB_ISTR_ESOF; } + + // loop to handle all pending CTR interrupts + while (int_status & USB_ISTR_CTR) { + uint32_t const ep_id = int_status & USB_ISTR_EP_ID; + + if ((int_status & USB_ISTR_DIR) == 0U) { + handle_ctr_tx(ep_id); // TX/IN + } else { + handle_ctr_rx(ep_id); // RX/OUT or both (RX/TX !!) + } + + int_status = USB->ISTR; + } } //--------------------------------------------------------------------+ diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h index 4ada26895..dd030652b 100644 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ b/src/portable/st/stm32_fsdev/fsdev_common.h @@ -167,6 +167,8 @@ typedef enum { //--------------------------------------------------------------------+ // Endpoint +// - CTR is write 0 to clear +// - DTOG and STAT are write 1 to toggle //--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value) { -- cgit v1.3.1 From 26b0df2c26d31eef1a0d4012d42534f9c434f4eb Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 17:24:41 +0700 Subject: refactor xfer_ctl_ptr() to take epnum/dir to reduce computation --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 77 +++++++++++++++------------ 1 file changed, 43 insertions(+), 34 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 381dfdd94..d0a51d48e 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -165,7 +165,7 @@ static uint8_t remoteWakeCountdown; // When wake is requested // into the stack. static void handle_bus_reset(uint8_t rhport); static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix); -static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr); +static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, uint8_t dir); // PMA allocation/access static uint16_t ep_buf_ptr; ///< Points to first free memory location @@ -183,13 +183,7 @@ static void edpt0_open(uint8_t rhport); // Inline helper //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint32_t ep_addr) -{ - uint8_t epnum = tu_edpt_number(ep_addr); - uint8_t dir = tu_edpt_dir(ep_addr); - // Fix -Werror=null-dereference - TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX, &xfer_status[0][0]); - +TU_ATTR_ALWAYS_INLINE static inline xfer_ctl_t *xfer_ctl_ptr(uint8_t epnum, uint8_t dir) { return &xfer_status[epnum][dir]; } @@ -290,8 +284,9 @@ static void handle_ctr_tx(uint32_t ep_id) { // Verify the CTR bit is set. This was in the ST Micro code, but I'm not sure it's actually necessary? TU_VERIFY(ep_reg & USB_EP_CTR_TX, ); + uint8_t const ep_num = ep_reg & USB_EPADDR_FIELD; uint8_t ep_addr = (ep_reg & USB_EPADDR_FIELD) | TUSB_DIR_IN_MASK; - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, TUSB_DIR_IN); if (ep_is_iso(ep_reg)) { // Ignore spurious interrupts that we don't schedule @@ -344,11 +339,9 @@ static void handle_ctr_rx(uint32_t ep_id) { // Verify the CTR bit is set. This was in the ST Micro code, but I'm not sure it's actually necessary? TU_VERIFY(ep_reg & USB_EP_CTR_RX, ); + ep_reg = (ep_reg & ~USB_EP_CTR_RX) | USB_EP_CTR_TX; // Clear CTR RX and reserved CTR TX - uint8_t const ep_addr = ep_reg & USB_EPADDR_FIELD; - - // Clear CTR RX and reserved CTR TX - ep_reg = (ep_reg & ~USB_EP_CTR_RX) | USB_EP_CTR_TX; + uint8_t const ep_num = ep_reg & USB_EPADDR_FIELD; if (ep_reg & USB_EP_SETUP) { uint32_t count = btable_get_count(ep_id, BTABLE_BUF_RX); @@ -372,7 +365,7 @@ static void handle_ctr_rx(uint32_t ep_id) { ep_reg &= USB_EPRX_STAT | USB_EPREG_MASK; // reversed all toggle except RX Status bool const is_iso = ep_is_iso(ep_reg); - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, TUSB_DIR_OUT); uint8_t buf_id; if (is_iso) { @@ -394,10 +387,11 @@ static void handle_ctr_rx(uint32_t ep_id) { } if ((rx_count < xfer->max_packet_size) || (xfer->queued_len == xfer->total_len)) { + uint8_t const ep_addr = ep_num; // all bytes received or short packet dcd_event_xfer_complete(0, ep_addr, xfer->queued_len, XFER_RESULT_SUCCESS, true); - if (ep_addr == 0u) { + if (ep_num == 0) { // prepared for status packet btable_set_rx_bufsize(ep_id, BTABLE_BUF_RX, CFG_TUD_ENDPOINT0_SIZE); } @@ -598,6 +592,7 @@ void edpt0_open(uint8_t rhport) { bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; uint8_t const ep_addr = desc_ep->bEndpointAddress; + uint8_t const ep_num = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); const uint16_t packet_size = tu_edpt_packet_size(desc_ep); uint8_t const ep_idx = dcd_ep_alloc(ep_addr, desc_ep->bmAttributes.xfer); @@ -624,8 +619,9 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { uint16_t pma_addr = dcd_pma_alloc(packet_size, false); btable_set_addr(ep_idx, dir == TUSB_DIR_IN ? BTABLE_BUF_TX : BTABLE_BUF_RX, pma_addr); - xfer_ctl_ptr(ep_addr)->max_packet_size = packet_size; - xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + xfer->max_packet_size = packet_size; + xfer->ep_idx = ep_idx; ep_reg = ep_add_status(ep_reg, dir, EP_STAT_NAK); ep_reg = ep_add_dtog(ep_reg, dir, 0); @@ -663,6 +659,8 @@ void dcd_edpt_close_all(uint8_t rhport) bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void)rhport; + uint8_t const ep_num = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); uint8_t const ep_idx = dcd_ep_alloc(ep_addr, TUSB_XFER_ISOCHRONOUS); /* Create a packet memory buffer area. Enable double buffering for devices with 2048 bytes PMA, @@ -676,7 +674,9 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet btable_set_addr(ep_idx, 0, pma_addr); btable_set_addr(ep_idx, 1, pma_addr2); - xfer_ctl_ptr(ep_addr)->ep_idx = ep_idx; + + xfer_ctl_t* xfer = xfer_ctl_ptr(ep_num, dir); + xfer->ep_idx = ep_idx; return true; } @@ -684,10 +684,13 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { (void)rhport; uint8_t const ep_addr = desc_ep->bEndpointAddress; - uint8_t const ep_idx = xfer_ctl_ptr(ep_addr)->ep_idx; + uint8_t const ep_num = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); + xfer_ctl_t* xfer = xfer_ctl_ptr(ep_num, dir); - xfer_ctl_ptr(ep_addr)->max_packet_size = tu_edpt_packet_size(desc_ep); + uint8_t const ep_idx = xfer->ep_idx; + + xfer->max_packet_size = tu_edpt_packet_size(desc_ep); uint32_t ep_reg = FSDEV_REG->ep[0].reg & ~USB_EPREG_MASK; ep_reg |= tu_edpt_number(ep_addr) | USB_EP_ISOCHRONOUS | USB_EP_CTR_RX | USB_EP_CTR_TX; @@ -735,12 +738,11 @@ static void dcd_transmit_packet(xfer_ctl_t *xfer, uint16_t ep_ix) { dcd_int_enable(0); } -static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { +static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, uint8_t dir) { (void) rhport; - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); uint8_t const ep_idx = xfer->ep_idx; - uint8_t const dir = tu_edpt_dir(ep_addr); if (dir == TUSB_DIR_IN) { dcd_transmit_packet(xfer, ep_idx); @@ -764,31 +766,37 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_addr) { } bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); + uint8_t const ep_num = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + xfer->buffer = buffer; xfer->ff = NULL; xfer->total_len = total_bytes; xfer->queued_len = 0; - return edpt_xfer(rhport, ep_addr); + return edpt_xfer(rhport, ep_num, dir); } bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t *ff, uint16_t total_bytes) { - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); + uint8_t const ep_num = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + xfer->buffer = NULL; xfer->ff = ff; xfer->total_len = total_bytes; xfer->queued_len = 0; - return edpt_xfer(rhport, ep_addr); + return edpt_xfer(rhport, ep_num, dir); } void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); - uint8_t const ep_idx = xfer->ep_idx; + uint8_t const ep_num = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + uint8_t const ep_idx = xfer->ep_idx; uint32_t ep_reg = ep_read(ep_idx); ep_reg |= USB_EP_CTR_RX | USB_EP_CTR_TX; // reserve CTR bits @@ -801,11 +809,12 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { (void)rhport; - xfer_ctl_t *xfer = xfer_ctl_ptr(ep_addr); - uint8_t const ep_idx = xfer->ep_idx; + uint8_t const ep_num = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - uint32_t ep_reg = ep_read(ep_idx); - ep_reg |= USB_EP_CTR_RX | USB_EP_CTR_TX; // reserve CTR bits + xfer_ctl_t *xfer = xfer_ctl_ptr(ep_num, dir); + uint8_t const ep_idx = xfer->ep_idx; + + uint32_t ep_reg = ep_read(ep_idx) | EP_CTR_TXRX; ep_reg &= USB_EPREG_MASK | EP_STAT_MASK(dir) | EP_DTOG_MASK(dir); if (!ep_is_iso(ep_reg)) { -- cgit v1.3.1 From 7954d9cb4c486b263bed8984b7dd7553092150f9 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 18:15:22 +0700 Subject: rename to fsdev_type.h, use FSDDEV_REG instead of USB --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 57 ++--- src/portable/st/stm32_fsdev/fsdev_common.h | 289 -------------------------- src/portable/st/stm32_fsdev/fsdev_stm32.h | 2 + src/portable/st/stm32_fsdev/fsdev_type.h | 286 +++++++++++++++++++++++++ 4 files changed, 317 insertions(+), 317 deletions(-) delete mode 100644 src/portable/st/stm32_fsdev/fsdev_common.h create mode 100644 src/portable/st/stm32_fsdev/fsdev_type.h (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index d0a51d48e..29e1ca111 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -123,7 +123,7 @@ #error "Unknown USB IP" #endif -#include "fsdev_common.h" +#include "fsdev_type.h" //--------------------------------------------------------------------+ // Configuration @@ -197,25 +197,25 @@ void dcd_init(uint8_t rhport) { } // Perform USB peripheral reset - USB->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; + FSDEV_REG->CNTR = USB_CNTR_FRES | USB_CNTR_PDWN; for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); } - USB->CNTR &= ~USB_CNTR_PDWN; + FSDEV_REG->CNTR &= ~USB_CNTR_PDWN; // Wait startup time, for F042 and F070, this is <= 1 us. for (volatile uint32_t i = 0; i < 200; i++) { // should be a few us asm("NOP"); } - USB->CNTR = 0; // Enable USB + FSDEV_REG->CNTR = 0; // Enable USB -#if !defined(STM32G0) && !defined(STM32H5) && !defined(STM32U5) - // BTABLE register does not exist any more on STM32G0, it is fixed to USB SRAM base address - USB->BTABLE = FSDEV_BTABLE_BASE; +#if !defined(FSDEV_BUS_32BIT) + // BTABLE register does not exist any more on 32-bit bus devices + FSDEV_REG->BTABLE = FSDEV_BTABLE_BASE; #endif - USB->ISTR = 0; // Clear pending interrupts + FSDEV_REG->ISTR = 0; // Clear pending interrupts // Reset endpoints to disabled for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { @@ -223,7 +223,7 @@ void dcd_init(uint8_t rhport) { ep_write(i, 0u); } - USB->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; + FSDEV_REG->CNTR |= USB_CNTR_RESETM | USB_CNTR_ESOFM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; handle_bus_reset(rhport); // Enable pull-up if supported @@ -234,9 +234,9 @@ void dcd_sof_enable(uint8_t rhport, bool en) { (void)rhport; if (en) { - USB->CNTR |= USB_CNTR_SOFM; + FSDEV_REG->CNTR |= USB_CNTR_SOFM; } else { - USB->CNTR &= ~USB_CNTR_SOFM; + FSDEV_REG->CNTR &= ~USB_CNTR_SOFM; } } @@ -254,12 +254,12 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { void dcd_remote_wakeup(uint8_t rhport) { (void)rhport; - USB->CNTR |= USB_CNTR_RESUME; + FSDEV_REG->CNTR |= USB_CNTR_RESUME; remoteWakeCountdown = 4u; // required to be 1 to 15 ms, ESOF should trigger every 1ms. } static void handle_bus_reset(uint8_t rhport) { - USB->DADDR = 0u; // disable USB Function + FSDEV_REG->DADDR = 0u; // disable USB Function for (uint32_t i = 0; i < FSDEV_EP_COUNT; i++) { // Clear EP allocation status @@ -274,7 +274,7 @@ static void handle_bus_reset(uint8_t rhport) { edpt0_open(rhport); // open control endpoint (both IN & OUT) - USB->DADDR = USB_DADDR_EF; // Enable USB Function + FSDEV_REG->DADDR = USB_DADDR_EF; // Enable USB Function } // Handle CTR interrupt for the TX/IN direction @@ -410,7 +410,7 @@ static void handle_ctr_rx(uint32_t ep_id) { } void dcd_int_handler(uint8_t rhport) { - uint32_t int_status = USB->ISTR; + uint32_t int_status = FSDEV_REG->ISTR; // const uint32_t handled_ints = USB_ISTR_CTR | USB_ISTR_RESET | USB_ISTR_WKUP // | USB_ISTR_SUSP | USB_ISTR_SOF | USB_ISTR_ESOF; // unused IRQs: (USB_ISTR_PMAOVR | USB_ISTR_ERR | USB_ISTR_L1REQ ) @@ -421,23 +421,23 @@ void dcd_int_handler(uint8_t rhport) { /* Put SOF flag at the beginning of ISR in case to get least amount of jitter if it is used for timing purposes */ if (int_status & USB_ISTR_SOF) { - USB->ISTR = (fsdev_bus_t)~USB_ISTR_SOF; - dcd_event_sof(0, USB->FNR & USB_FNR_FN, true); + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_SOF; + dcd_event_sof(0, FSDEV_REG->FNR & USB_FNR_FN, true); } if (int_status & USB_ISTR_RESET) { // USBRST is start of reset. - USB->ISTR = (fsdev_bus_t)~USB_ISTR_RESET; + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_RESET; handle_bus_reset(rhport); dcd_event_bus_reset(0, TUSB_SPEED_FULL, true); return; // Don't do the rest of the things here; perhaps they've been cleared? } if (int_status & USB_ISTR_WKUP) { - USB->CNTR &= ~USB_CNTR_LPMODE; - USB->CNTR &= ~USB_CNTR_FSUSP; + FSDEV_REG->CNTR &= ~USB_CNTR_LPMODE; + FSDEV_REG->CNTR &= ~USB_CNTR_FSUSP; - USB->ISTR = (fsdev_bus_t)~USB_ISTR_WKUP; + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_WKUP; dcd_event_bus_signal(0, DCD_EVENT_RESUME, true); } @@ -446,22 +446,22 @@ void dcd_int_handler(uint8_t rhport) { * these events cannot be differentiated, so we only trigger suspend. */ /* Force low-power mode in the macrocell */ - USB->CNTR |= USB_CNTR_FSUSP; - USB->CNTR |= USB_CNTR_LPMODE; + FSDEV_REG->CNTR |= USB_CNTR_FSUSP; + FSDEV_REG->CNTR |= USB_CNTR_LPMODE; /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ - USB->ISTR = (fsdev_bus_t)~USB_ISTR_SUSP; + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_SUSP; dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true); } if (int_status & USB_ISTR_ESOF) { if (remoteWakeCountdown == 1u) { - USB->CNTR &= ~USB_CNTR_RESUME; + FSDEV_REG->CNTR &= ~USB_CNTR_RESUME; } if (remoteWakeCountdown > 0u) { remoteWakeCountdown--; } - USB->ISTR = (fsdev_bus_t)~USB_ISTR_ESOF; + FSDEV_REG->ISTR = (fsdev_bus_t)~USB_ISTR_ESOF; } // loop to handle all pending CTR interrupts @@ -474,7 +474,7 @@ void dcd_int_handler(uint8_t rhport) { handle_ctr_rx(ep_id); // RX/OUT or both (RX/TX !!) } - int_status = USB->ISTR; + int_status = FSDEV_REG->ISTR; } } @@ -488,10 +488,11 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *req (void)rhport; if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && + request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && request->bRequest == TUSB_REQ_SET_ADDRESS) { uint8_t const dev_addr = (uint8_t)request->wValue; - USB->DADDR = (USB_DADDR_EF | dev_addr); + FSDEV_REG->DADDR = (USB_DADDR_EF | dev_addr); } } diff --git a/src/portable/st/stm32_fsdev/fsdev_common.h b/src/portable/st/stm32_fsdev/fsdev_common.h deleted file mode 100644 index dd030652b..000000000 --- a/src/portable/st/stm32_fsdev/fsdev_common.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright(c) 2016 STMicroelectronics - * Copyright(c) N Conrad - * Copyright (c) 2024, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#ifndef TUSB_FSDEV_COMMON_H -#define TUSB_FSDEV_COMMON_H - -#ifdef __cplusplus - extern "C" { -#endif - -#include "stdint.h" - -// If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it -// Both of these MUST be a multiple of 2, and are in byte units. -#ifndef FSDEV_BTABLE_BASE -#define FSDEV_BTABLE_BASE 0U -#endif - -TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 bytes"); - -// FSDEV_PMA_SIZE is PMA buffer size in bytes. -// - 512-byte devices, access with a stride of two words (use every other 16-bit address) -// - 1024-byte devices, access with a stride of one word (use every 16-bit address) -// - 2048-byte devices, access with 32-bit address - -// For purposes of accessing the packet -#if FSDEV_PMA_SIZE == 512 - #define FSDEV_PMA_STRIDE (2u) // 1x16 bit access scheme - #define pma_aligned TU_ATTR_ALIGNED(4) -#elif FSDEV_PMA_SIZE == 1024 - #define FSDEV_PMA_STRIDE (1u) // 2x16 bit access scheme - #define pma_aligned -#elif FSDEV_PMA_SIZE == 2048 - #ifndef FSDEV_BUS_32BIT - #warning "FSDEV_PMA_SIZE is 2048, but FSDEV_BUS_32BIT is not defined" - #endif - #define FSDEV_PMA_STRIDE (1u) // 32 bit access scheme - #define pma_aligned -#endif - -enum { - BTABLE_BUF_TX = 0, - BTABLE_BUF_RX = 1 -}; - -// hardware limit endpoint -#define FSDEV_EP_COUNT 8 - -// Buffer Table is located in Packet Memory Area (PMA) and therefore its address access is forced to either -// 16-bit or 32-bit depending on FSDEV_BUS_32BIT. -typedef struct { - union { - // 0: TX (IN), 1: RX (OUT) - - // strictly 16-bit access (could be 32-bit aligned) - struct { - volatile pma_aligned uint16_t addr; - volatile pma_aligned uint16_t count; - } ep16[FSDEV_EP_COUNT][2]; - - // strictly 32-bit access - struct { - volatile uint32_t count_addr; - } ep32[FSDEV_EP_COUNT][2]; - }; -} fsdev_btable_t; - -TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT*8*FSDEV_PMA_STRIDE, "size is not correct"); -TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE does not fit in PMA RAM"); - - -#define FSDEV_BTABLE ((volatile fsdev_btable_t*) (USB_PMAADDR+FSDEV_BTABLE_BASE)) - -// volatile 32-bit aligned -#define _va32 volatile TU_ATTR_ALIGNED(4) - -// The fsdev_bus_t type can be used for both register and PMA access necessities -// For type-safety create a new macro for the volatile address of PMAADDR -// The compiler should warn us if we cast it to a non-volatile type? -#ifdef FSDEV_BUS_32BIT -typedef uint32_t fsdev_bus_t; -static volatile uint32_t * const pma32 = (volatile uint32_t*)USB_PMAADDR; - -#else -typedef uint16_t fsdev_bus_t; -// Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) -static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; -#endif - -typedef struct { - struct { - _va32 fsdev_bus_t reg; - }ep[FSDEV_EP_COUNT]; - - _va32 uint32_t RESERVED7[8]; // Reserved - _va32 fsdev_bus_t CNTR; // 40: Control register - _va32 fsdev_bus_t ISTR; // 44: Interrupt status register - _va32 fsdev_bus_t FNR; // 48: Frame number register - _va32 fsdev_bus_t DADDR; // 4C: Device address register - _va32 fsdev_bus_t BTABLE; // 50: Buffer Table address register (16-bit only) - _va32 fsdev_bus_t LPMCSR; // 54: LPM Control and Status Register (32-bit only) - _va32 fsdev_bus_t BCDR; // 58: Battery Charging Detector Register (32-bit only) -} fsdev_regs_t; - -TU_VERIFY_STATIC(offsetof(fsdev_regs_t, CNTR) == 0x40, "Wrong offset"); -TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); - -#define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) - - -#ifndef USB_EPTX_STAT -#define USB_EPTX_STAT 0x0030U -#endif - -#ifndef USB_EPRX_STAT -#define USB_EPRX_STAT 0x3000U -#endif - -#ifndef USB_EPTX_STAT_Pos -#define USB_EPTX_STAT_Pos 4u -#endif - -#ifndef USB_EP_DTOG_TX_Pos -#define USB_EP_DTOG_TX_Pos 6u -#endif - -#ifndef USB_EP_CTR_TX_Pos -#define USB_EP_CTR_TX_Pos 7u -#endif - - -#define EP_CTR_TXRX (USB_EP_CTR_TX | USB_EP_CTR_RX) - -typedef enum { - EP_STAT_DISABLED = 0, - EP_STAT_STALL = 1, - EP_STAT_NAK = 2, - EP_STAT_VALID = 3 -}ep_stat_t; - -#define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) -#define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) - -//--------------------------------------------------------------------+ -// Endpoint -// - CTR is write 0 to clear -// - DTOG and STAT are write 1 to toggle -//--------------------------------------------------------------------+ - -TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value) { - FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; -} - -// write ep register with clear CTR_RX and CTR_TX mask (0 is no clear) -//TU_ATTR_ALWAYS_INLINE static inline void ep_write_with_clear_ctr(uint32_t ep_id, uint32_t value, uint32_t clear_ctr_mask) { -// value |= USB_EP_CTR_RX | USB_EP_CTR_TX; -// if (clear_ctr_mask) { -// value &= ~clear_ctr_mask; -// } -// FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; -//} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_read(uint32_t ep_id) { - return FSDEV_REG->ep[ep_id].reg; -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_status(uint32_t reg, tusb_dir_t dir, ep_stat_t state) { - return reg ^ (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_dtog(uint32_t reg, tusb_dir_t dir, uint8_t state) { - return reg ^ (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_clear_ctr(uint32_t reg, tusb_dir_t dir) { - return reg & ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); -} - -TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { - return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; -} - -//--------------------------------------------------------------------+ -// BTable -//--------------------------------------------------------------------+ - -TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { -#ifdef FSDEV_BUS_32BIT - return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; -#else - return FSDEV_BTABLE->ep16[ep_id][buf_id].addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; -#endif -} - -TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_count(uint32_t ep_id, uint8_t buf_id) { - uint16_t count; -#ifdef FSDEV_BUS_32BIT - count = (FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr >> 16); -#else - count = FSDEV_BTABLE->ep16[ep_id][buf_id].count; -#endif - return count & 0x3FFU; -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; - cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); - FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; -#endif -} - -/* Aligned buffer size according to hardware */ -TU_ATTR_ALWAYS_INLINE static inline uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block) { - /* The STM32 full speed USB peripheral supports only a limited set of - * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ - uint16_t block_in_bytes; - if (size > 62) { - block_in_bytes = 32; - *blsize = 1; - } else { - block_in_bytes = 2; - *blsize = 0; - } - - *num_block = tu_div_ceil(size, block_in_bytes); - - return (*num_block) * block_in_bytes; -} - -TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint32_t wCount) { - uint8_t blsize, num_block; - (void) pma_align_buffer_size(wCount, &blsize, &num_block); - - /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ - uint16_t bl_nb = (blsize << 15) | ((num_block - blsize) << 10); - -#ifdef FSDEV_BUS_32BIT - uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; - count_addr = (bl_nb << 16) | (count_addr & 0x0000FFFFu); - FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; -#else - FSDEV_BTABLE->ep16[ep_id][buf_id].count = bl_nb; -#endif -} - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/src/portable/st/stm32_fsdev/fsdev_stm32.h b/src/portable/st/stm32_fsdev/fsdev_stm32.h index f20505f28..bb2c72fd1 100644 --- a/src/portable/st/stm32_fsdev/fsdev_stm32.h +++ b/src/portable/st/stm32_fsdev/fsdev_stm32.h @@ -198,6 +198,8 @@ #define FSDEV_REG_BASE USB_BASE #elif defined(USB_DRD_BASE) #define FSDEV_REG_BASE USB_DRD_BASE +#elif defined(USB_DRD_FS_BASE) + #define FSDEV_REG_BASE USB_DRD_FS_BASE #else #error "FSDEV_REG_BASE not defined" #endif diff --git a/src/portable/st/stm32_fsdev/fsdev_type.h b/src/portable/st/stm32_fsdev/fsdev_type.h new file mode 100644 index 000000000..116017f63 --- /dev/null +++ b/src/portable/st/stm32_fsdev/fsdev_type.h @@ -0,0 +1,286 @@ +/* + * The MIT License (MIT) + * + * Copyright(c) 2016 STMicroelectronics + * Copyright(c) N Conrad + * Copyright (c) 2024, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef TUSB_FSDEV_TYPE_H +#define TUSB_FSDEV_TYPE_H + +#ifdef __cplusplus + extern "C" { +#endif + +#include "stdint.h" + +// If sharing with CAN, one can set this to be non-zero to give CAN space where it wants it +// Both of these MUST be a multiple of 2, and are in byte units. +#ifndef FSDEV_BTABLE_BASE +#define FSDEV_BTABLE_BASE 0U +#endif + +TU_VERIFY_STATIC(FSDEV_BTABLE_BASE % 8 == 0, "BTABLE base must be aligned to 8 bytes"); + +// FSDEV_PMA_SIZE is PMA buffer size in bytes. +// - 512-byte devices, access with a stride of two words (use every other 16-bit address) +// - 1024-byte devices, access with a stride of one word (use every 16-bit address) +// - 2048-byte devices, access with 32-bit address + +// For purposes of accessing the packet +#if FSDEV_PMA_SIZE == 512 + #define FSDEV_PMA_STRIDE (2u) // 1x16 bit access scheme + #define pma_aligned TU_ATTR_ALIGNED(4) +#elif FSDEV_PMA_SIZE == 1024 + #define FSDEV_PMA_STRIDE (1u) // 2x16 bit access scheme + #define pma_aligned +#elif FSDEV_PMA_SIZE == 2048 + #ifndef FSDEV_BUS_32BIT + #warning "FSDEV_PMA_SIZE is 2048, but FSDEV_BUS_32BIT is not defined" + #endif + #define FSDEV_PMA_STRIDE (1u) // 32 bit access scheme + #define pma_aligned +#endif + +//--------------------------------------------------------------------+ +// BTable Typedef +//--------------------------------------------------------------------+ +enum { + BTABLE_BUF_TX = 0, + BTABLE_BUF_RX = 1 +}; + +// hardware limit endpoint +#define FSDEV_EP_COUNT 8 + +// Buffer Table is located in Packet Memory Area (PMA) and therefore its address access is forced to either +// 16-bit or 32-bit depending on FSDEV_BUS_32BIT. +typedef struct { + union { + // 0: TX (IN), 1: RX (OUT) + + // strictly 16-bit access (could be 32-bit aligned) + struct { + volatile pma_aligned uint16_t addr; + volatile pma_aligned uint16_t count; + } ep16[FSDEV_EP_COUNT][2]; + + // strictly 32-bit access + struct { + volatile uint32_t count_addr; + } ep32[FSDEV_EP_COUNT][2]; + }; +} fsdev_btable_t; + +TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT*8*FSDEV_PMA_STRIDE, "size is not correct"); +TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE does not fit in PMA RAM"); + +#define FSDEV_BTABLE ((volatile fsdev_btable_t*) (USB_PMAADDR+FSDEV_BTABLE_BASE)) + +//--------------------------------------------------------------------+ +// Registers Typedef +//--------------------------------------------------------------------+ + +// volatile 32-bit aligned +#define _va32 volatile TU_ATTR_ALIGNED(4) + +// The fsdev_bus_t type can be used for both register and PMA access necessities +// For type-safety create a new macro for the volatile address of PMAADDR +// The compiler should warn us if we cast it to a non-volatile type? +#ifdef FSDEV_BUS_32BIT +typedef uint32_t fsdev_bus_t; +static volatile uint32_t * const pma32 = (volatile uint32_t*)USB_PMAADDR; + +#else +typedef uint16_t fsdev_bus_t; +// Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) +static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; +#endif + +typedef struct { + struct { + _va32 fsdev_bus_t reg; + }ep[FSDEV_EP_COUNT]; + + _va32 uint32_t RESERVED7[8]; // Reserved + _va32 fsdev_bus_t CNTR; // 40: Control register + _va32 fsdev_bus_t ISTR; // 44: Interrupt status register + _va32 fsdev_bus_t FNR; // 48: Frame number register + _va32 fsdev_bus_t DADDR; // 4C: Device address register + _va32 fsdev_bus_t BTABLE; // 50: Buffer Table address register (16-bit only) + _va32 fsdev_bus_t LPMCSR; // 54: LPM Control and Status Register (32-bit only) + _va32 fsdev_bus_t BCDR; // 58: Battery Charging Detector Register (32-bit only) +} fsdev_regs_t; + +TU_VERIFY_STATIC(offsetof(fsdev_regs_t, CNTR) == 0x40, "Wrong offset"); +TU_VERIFY_STATIC(sizeof(fsdev_regs_t) == 0x5C, "Size is not correct"); + +#define FSDEV_REG ((fsdev_regs_t*) FSDEV_REG_BASE) + + +#ifndef USB_EPTX_STAT +#define USB_EPTX_STAT 0x0030U +#endif + +#ifndef USB_EPRX_STAT +#define USB_EPRX_STAT 0x3000U +#endif + +#ifndef USB_EPTX_STAT_Pos +#define USB_EPTX_STAT_Pos 4u +#endif + +#ifndef USB_EP_DTOG_TX_Pos +#define USB_EP_DTOG_TX_Pos 6u +#endif + +#ifndef USB_EP_CTR_TX_Pos +#define USB_EP_CTR_TX_Pos 7u +#endif + + +#define EP_CTR_TXRX (USB_EP_CTR_TX | USB_EP_CTR_RX) + +typedef enum { + EP_STAT_DISABLED = 0, + EP_STAT_STALL = 1, + EP_STAT_NAK = 2, + EP_STAT_VALID = 3 +}ep_stat_t; + +#define EP_STAT_MASK(_dir) (3u << (USB_EPTX_STAT_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) +#define EP_DTOG_MASK(_dir) (1u << (USB_EP_DTOG_TX_Pos + ((_dir) == TUSB_DIR_IN ? 0 : 8))) + +//--------------------------------------------------------------------+ +// Endpoint Helper +// - CTR is write 0 to clear +// - DTOG and STAT are write 1 to toggle +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline void ep_write(uint32_t ep_id, uint32_t value) { + FSDEV_REG->ep[ep_id].reg = (fsdev_bus_t) value; +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_read(uint32_t ep_id) { + return FSDEV_REG->ep[ep_id].reg; +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_status(uint32_t reg, tusb_dir_t dir, ep_stat_t state) { + return reg ^ (state << (USB_EPTX_STAT_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_add_dtog(uint32_t reg, tusb_dir_t dir, uint8_t state) { + return reg ^ (state << (USB_EP_DTOG_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t ep_clear_ctr(uint32_t reg, tusb_dir_t dir) { + return reg & ~(1 << (USB_EP_CTR_TX_Pos + (dir == TUSB_DIR_IN ? 0 : 8))); +} + +TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(uint32_t reg) { + return (reg & USB_EP_TYPE_MASK) == USB_EP_ISOCHRONOUS; +} + +//--------------------------------------------------------------------+ +// BTable Helper +//--------------------------------------------------------------------+ + +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_addr(uint32_t ep_id, uint8_t buf_id) { +#ifdef FSDEV_BUS_32BIT + return FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr & 0x0000FFFFu; +#else + return FSDEV_BTABLE->ep16[ep_id][buf_id].addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_addr(uint32_t ep_id, uint8_t buf_id, uint16_t addr) { +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & 0xFFFF0000u) | (addr & 0x0000FFFCu); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + FSDEV_BTABLE->ep16[ep_id][buf_id].addr = addr; +#endif +} + +TU_ATTR_ALWAYS_INLINE static inline uint32_t btable_get_count(uint32_t ep_id, uint8_t buf_id) { + uint16_t count; +#ifdef FSDEV_BUS_32BIT + count = (FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr >> 16); +#else + count = FSDEV_BTABLE->ep16[ep_id][buf_id].count; +#endif + return count & 0x3FFU; +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_count(uint32_t ep_id, uint8_t buf_id, uint16_t byte_count) { +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (count_addr & ~0x03FF0000u) | ((byte_count & 0x3FFu) << 16); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + uint16_t cnt = FSDEV_BTABLE->ep16[ep_id][buf_id].count; + cnt = (cnt & ~0x3FFU) | (byte_count & 0x3FFU); + FSDEV_BTABLE->ep16[ep_id][buf_id].count = cnt; +#endif +} + +/* Aligned buffer size according to hardware */ +TU_ATTR_ALWAYS_INLINE static inline uint16_t pma_align_buffer_size(uint16_t size, uint8_t* blsize, uint8_t* num_block) { + /* The STM32 full speed USB peripheral supports only a limited set of + * buffer sizes given by the RX buffer entry format in the USB_BTABLE. */ + uint16_t block_in_bytes; + if (size > 62) { + block_in_bytes = 32; + *blsize = 1; + } else { + block_in_bytes = 2; + *blsize = 0; + } + + *num_block = tu_div_ceil(size, block_in_bytes); + + return (*num_block) * block_in_bytes; +} + +TU_ATTR_ALWAYS_INLINE static inline void btable_set_rx_bufsize(uint32_t ep_id, uint8_t buf_id, uint32_t wCount) { + uint8_t blsize, num_block; + (void) pma_align_buffer_size(wCount, &blsize, &num_block); + + /* Encode into register. When BLSIZE==1, we need to subtract 1 block count */ + uint16_t bl_nb = (blsize << 15) | ((num_block - blsize) << 10); + +#ifdef FSDEV_BUS_32BIT + uint32_t count_addr = FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr; + count_addr = (bl_nb << 16) | (count_addr & 0x0000FFFFu); + FSDEV_BTABLE->ep32[ep_id][buf_id].count_addr = count_addr; +#else + FSDEV_BTABLE->ep16[ep_id][buf_id].count = bl_nb; +#endif +} + +#ifdef __cplusplus + } +#endif + +#endif -- cgit v1.3.1 From 7d9b39946601e1c7cd393d09db40892bca5cf477 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 18:28:17 +0700 Subject: fix ep type bulk typo --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 29e1ca111..346cf8164 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -488,7 +488,6 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const *req (void)rhport; if (request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_DEVICE && - request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && request->bRequest == TUSB_REQ_SET_ADDRESS) { uint8_t const dev_addr = (uint8_t)request->wValue; @@ -605,7 +604,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_ep) { // Set type switch (desc_ep->bmAttributes.xfer) { case TUSB_XFER_BULK: - ep_reg |= USB_EP_CONTROL; // FIXME should it be bulk? + ep_reg |= USB_EP_BULK; break; case TUSB_XFER_INTERRUPT: ep_reg |= USB_EP_INTERRUPT; -- cgit v1.3.1 From 332f75cd44b58d340d36f30dbeb64742767a521c Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 31 Jul 2024 20:53:42 +0700 Subject: simplify read/write 16-bit packet --- src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c | 139 +++++++++++++------------- src/portable/st/stm32_fsdev/fsdev_ch32.h | 23 ----- src/portable/st/stm32_fsdev/fsdev_type.h | 38 ++++--- 3 files changed, 87 insertions(+), 113 deletions(-) (limited to 'src/portable') diff --git a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c index 346cf8164..cff328418 100644 --- a/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c +++ b/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c @@ -171,8 +171,8 @@ static bool edpt_xfer(uint8_t rhport, uint8_t ep_num, uint8_t dir); static uint16_t ep_buf_ptr; ///< Points to first free memory location static uint32_t dcd_pma_alloc(uint16_t len, bool dbuf); static uint8_t dcd_ep_alloc(uint8_t ep_addr, uint8_t ep_type); -static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes); -static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes); +static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes); +static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes); static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNBytes); static bool dcd_read_packet_memory_ff(tu_fifo_t *ff, uint16_t src, uint16_t wNBytes); @@ -828,10 +828,10 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { #ifdef FSDEV_BUS_32BIT static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) { const uint8_t *src8 = src; - volatile uint32_t *dst32 = (volatile uint32_t *)(USB_PMAADDR + dst); + volatile uint32_t *pma32 = (volatile uint32_t *)(USB_PMAADDR + dst); for (uint32_t n = wNBytes / 4; n > 0; --n) { - *dst32++ = tu_unaligned_read32(src8); + *pma32++ = tu_unaligned_read32(src8); src8 += 4; } @@ -849,11 +849,41 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui } } - *dst32 = wrVal; + *pma32 = wrVal; } return true; } + +static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { + uint8_t *dst8 = dst; + volatile uint32_t *src32 = (volatile uint32_t *)(USB_PMAADDR + src); + + for (uint32_t n = wNBytes / 4; n > 0; --n) { + tu_unaligned_write32(dst8, *src32++); + dst8 += 4; + } + + uint16_t odd = wNBytes & 0x03; + if (odd) { + uint32_t rdVal = *src32; + + *dst8 = tu_u32_byte0(rdVal); + odd--; + + if (odd) { + *++dst8 = tu_u32_byte1(rdVal); + odd--; + + if (odd) { + *++dst8 = tu_u32_byte2(rdVal); + } + } + } + + return true; +} + #else // Packet buffer access can only be 8- or 16-bit. /** @@ -862,26 +892,52 @@ static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, ui * @param dst, byte address in PMA; must be 16-bit aligned * @param src pointer to user memory area. * @param wPMABufAddr address into PMA. - * @param wNBytes no. of bytes to be copied. + * @param nbytes no. of bytes to be copied. * @retval None */ -static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t wNBytes) { - uint32_t n = (uint32_t)wNBytes >> 1U; +static bool dcd_write_packet_memory(uint16_t dst, const void *__restrict src, uint16_t nbytes) { + uint32_t n16 = (uint32_t)nbytes >> 1U; const uint8_t *src8 = src; - volatile uint16_t *pdw16 = &pma[FSDEV_PMA_STRIDE * (dst >> 1)]; + fsdev_pma16_t* pma16 = (fsdev_pma16_t*) (USB_PMAADDR + FSDEV_PMA_STRIDE * dst); - while (n--) { - *pdw16 = tu_unaligned_read16(src8); + while (n16--) { + pma16->u16 = tu_unaligned_read16(src8); src8 += 2; - pdw16 += FSDEV_PMA_STRIDE; + pma16++; + } + + if (nbytes & 0x01) { + pma16->u16 = (uint16_t) *src8; + } + + return true; +} + +/** + * @brief Copy a buffer from packet memory area (PMA) to user memory area. + * Uses unaligned for system memory and 16-bit access of packet memory + * @param nbytes no. of bytes to be copied. + * @retval None + */ +static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t nbytes) { + uint32_t n16 = (uint32_t)nbytes >> 1U; + fsdev_pma16_t* pma16 = (fsdev_pma16_t*) (USB_PMAADDR + FSDEV_PMA_STRIDE * src); + uint8_t *dst8 = (uint8_t *)dst; + + while (n16--) { + uint16_t temp16 = pma16->u16; + tu_unaligned_write16(dst8, temp16); + dst8 += 2; + pma16++; } - if (wNBytes & 0x01) { - *pdw16 = (uint16_t) *src8; + if (nbytes & 0x01) { + *dst8++ = tu_u16_low(pma16->u16); } return true; } + #endif /** @@ -959,61 +1015,6 @@ static bool dcd_write_packet_memory_ff(tu_fifo_t *ff, uint16_t dst, uint16_t wNB return true; } -#ifdef FSDEV_BUS_32BIT -static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { - uint8_t *dst8 = dst; - volatile uint32_t *src32 = (volatile uint32_t *)(USB_PMAADDR + src); - - for (uint32_t n = wNBytes / 4; n > 0; --n) { - tu_unaligned_write32(dst8, *src32++); - dst8 += 4; - } - - uint16_t odd = wNBytes & 0x03; - if (odd) { - uint32_t rdVal = *src32; - - *dst8 = tu_u32_byte0(rdVal); - odd--; - - if (odd) { - *++dst8 = tu_u32_byte1(rdVal); - odd--; - - if (odd) { - *++dst8 = tu_u32_byte2(rdVal); - } - } - } - - return true; -} -#else -/** - * @brief Copy a buffer from packet memory area (PMA) to user memory area. - * Uses unaligned for system memory and 16-bit access of packet memory - * @param wNBytes no. of bytes to be copied. - * @retval None - */ -static bool dcd_read_packet_memory(void *__restrict dst, uint16_t src, uint16_t wNBytes) { - uint32_t n = (uint32_t)wNBytes >> 1U; - volatile const uint16_t *pdw16 = &pma[FSDEV_PMA_STRIDE * (src >> 1)]; - uint8_t *dst8 = (uint8_t *)dst; - - while (n--) { - tu_unaligned_write16(dst8, *pdw16); - dst8 += 2; - pdw16 += FSDEV_PMA_STRIDE; - } - - if (wNBytes & 0x01) { - *dst8++ = tu_u16_low(*pdw16); - } - - return true; -} -#endif - /** * @brief Copy a buffer from user packet memory area (PMA) to FIFO. * Uses byte-access of system memory and 16-bit access of packet memory diff --git a/src/portable/st/stm32_fsdev/fsdev_ch32.h b/src/portable/st/stm32_fsdev/fsdev_ch32.h index 81ef08b8a..8c0961bb9 100644 --- a/src/portable/st/stm32_fsdev/fsdev_ch32.h +++ b/src/portable/st/stm32_fsdev/fsdev_ch32.h @@ -54,29 +54,6 @@ #endif #define FSDEV_PMA_SIZE (512u) - -#if 1 -// volatile 32-bit aligned -#define _vaa32 volatile TU_ATTR_ALIGNED(4) - -typedef struct { - _vaa32 uint16_t EP0R; // 00: USB Endpoint 0 register - _vaa32 uint16_t EP1R; // 04: USB Endpoint 1 register - _vaa32 uint16_t EP2R; // 08: USB Endpoint 2 register - _vaa32 uint16_t EP3R; // 0C: USB Endpoint 3 register - _vaa32 uint16_t EP4R; // 10: USB Endpoint 4 register - _vaa32 uint16_t EP5R; // 14: USB Endpoint 5 register - _vaa32 uint16_t EP6R; // 18: USB Endpoint 6 register - _vaa32 uint16_t EP7R; // 1C: USB Endpoint 7 register - _vaa32 uint16_t RESERVED7[16]; // Reserved - _vaa32 uint16_t CNTR; // 40: Control register - _vaa32 uint16_t ISTR; // 44: Interrupt status register - _vaa32 uint16_t FNR; // 48: Frame number register - _vaa32 uint16_t DADDR; // 4C: Device address register - _vaa32 uint16_t BTABLE; // 50: Buffer Table address register -} USB_TypeDef; -#endif - #define FSDEV_REG_BASE 0x40005C00UL #define USB_BASE (APB1PERIPH_BASE + 0x00005C00UL) /*!< USB_IP Peripheral Registers base address */ diff --git a/src/portable/st/stm32_fsdev/fsdev_type.h b/src/portable/st/stm32_fsdev/fsdev_type.h index 116017f63..e4a0f3f28 100644 --- a/src/portable/st/stm32_fsdev/fsdev_type.h +++ b/src/portable/st/stm32_fsdev/fsdev_type.h @@ -75,21 +75,19 @@ enum { // Buffer Table is located in Packet Memory Area (PMA) and therefore its address access is forced to either // 16-bit or 32-bit depending on FSDEV_BUS_32BIT. -typedef struct { - union { - // 0: TX (IN), 1: RX (OUT) - - // strictly 16-bit access (could be 32-bit aligned) - struct { - volatile pma_aligned uint16_t addr; - volatile pma_aligned uint16_t count; - } ep16[FSDEV_EP_COUNT][2]; - - // strictly 32-bit access - struct { - volatile uint32_t count_addr; - } ep32[FSDEV_EP_COUNT][2]; - }; +typedef union { + // 0: TX (IN), 1: RX (OUT) + + // strictly 16-bit access (could be 32-bit aligned) + struct { + volatile pma_aligned uint16_t addr; + volatile pma_aligned uint16_t count; + } ep16[FSDEV_EP_COUNT][2]; + + // strictly 32-bit access + struct { + volatile uint32_t count_addr; + } ep32[FSDEV_EP_COUNT][2]; } fsdev_btable_t; TU_VERIFY_STATIC(sizeof(fsdev_btable_t) == FSDEV_EP_COUNT*8*FSDEV_PMA_STRIDE, "size is not correct"); @@ -97,6 +95,10 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE #define FSDEV_BTABLE ((volatile fsdev_btable_t*) (USB_PMAADDR+FSDEV_BTABLE_BASE)) +typedef struct { + volatile pma_aligned uint16_t u16; +} fsdev_pma16_t; + //--------------------------------------------------------------------+ // Registers Typedef //--------------------------------------------------------------------+ @@ -105,16 +107,10 @@ TU_VERIFY_STATIC(FSDEV_BTABLE_BASE + FSDEV_EP_COUNT*8 <= FSDEV_PMA_SIZE, "BTABLE #define _va32 volatile TU_ATTR_ALIGNED(4) // The fsdev_bus_t type can be used for both register and PMA access necessities -// For type-safety create a new macro for the volatile address of PMAADDR -// The compiler should warn us if we cast it to a non-volatile type? #ifdef FSDEV_BUS_32BIT typedef uint32_t fsdev_bus_t; -static volatile uint32_t * const pma32 = (volatile uint32_t*)USB_PMAADDR; - #else typedef uint16_t fsdev_bus_t; -// Volatile is also needed to prevent the optimizer from changing access to 32-bit (as 32-bit access is forbidden) -static volatile uint16_t * const pma = (volatile uint16_t*)USB_PMAADDR; #endif typedef struct { -- cgit v1.3.1