From 56f53a61329f3a3a492530e364f543f3a419297f Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 2 Nov 2024 12:45:32 +0100 Subject: Replace cache clean/invalidate by MPU config. --- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 43 +++---------------------------- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 43 ------------------------------- 2 files changed, 4 insertions(+), 82 deletions(-) (limited to 'src/portable') diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index c59c107ff..201936e53 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -56,46 +56,11 @@ static const ci_hs_controller_t _ci_controller[] = #define CI_HS_REG(_port) ((ci_hs_regs_t*) _ci_controller[_port].reg_base) //------------- DCD -------------// -#define CI_DCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) -#define CI_DCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) +#define CI_DCD_INT_ENABLE(_p) NVIC_EnableIRQ ((IRQn_Type)_ci_controller[_p].irqnum) +#define CI_DCD_INT_DISABLE(_p) NVIC_DisableIRQ((IRQn_Type)_ci_controller[_p].irqnum) //------------- HCD -------------// -#define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ (_ci_controller[_p].irqnum) -#define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ(_ci_controller[_p].irqnum) - -//------------- DCache -------------// -TU_ATTR_ALWAYS_INLINE static inline bool imxrt_is_cache_mem(uintptr_t addr) { - return !(0x20000000 <= addr && addr < 0x20100000); -} - -TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean(void const* addr, uint32_t data_size) { - const uintptr_t addr32 = (uintptr_t) addr; - if (imxrt_is_cache_mem(addr32)) { - TU_ASSERT(tu_is_aligned32(addr32)); - SCB_CleanDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); - } - return true; -} - -TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { - const uintptr_t addr32 = (uintptr_t) addr; - if (imxrt_is_cache_mem(addr32)) { - // Invalidating does not push cached changes back to RAM so we need to be - // *very* careful when we do it. If we're not aligned, then we risk resetting - // values back to their RAM state. - TU_ASSERT(tu_is_aligned32(addr32)); - SCB_InvalidateDCache_by_Addr((void*) addr32, (int32_t) data_size); - } - return true; -} - -TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - const uintptr_t addr32 = (uintptr_t) addr; - if (imxrt_is_cache_mem(addr32)) { - TU_ASSERT(tu_is_aligned32(addr32)); - SCB_CleanInvalidateDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); - } - return true; -} +#define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ ((IRQn_Type)_ci_controller[_p].irqnum) +#define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ((IRQn_Type)_ci_controller[_p].irqnum) #endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 430a0aad1..76b78cb57 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -33,19 +33,6 @@ #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX #include "ci_hs_imxrt.h" - - void dcd_dcache_clean(void const* addr, uint32_t data_size) { - imxrt_dcache_clean(addr, data_size); - } - - void dcd_dcache_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_invalidate(addr, data_size); - } - - void dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_clean_invalidate(addr, data_size); - } - #else #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) @@ -57,18 +44,6 @@ #else #error "Unsupported MCUs" #endif - - TU_ATTR_WEAK void dcd_dcache_clean(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; - } - - TU_ATTR_WEAK void dcd_dcache_invalidate(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; - } - - TU_ATTR_WEAK void dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; - } #endif //--------------------------------------------------------------------+ @@ -230,8 +205,6 @@ static void bus_reset(uint8_t rhport) _dcd_data.qhd[0][0].qtd_overlay.next = _dcd_data.qhd[0][1].qtd_overlay.next = QTD_NEXT_INVALID; _dcd_data.qhd[0][0].int_on_setup = 1; // OUT only - - dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); } bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { @@ -257,8 +230,6 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; #endif - dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); - dcd_reg->ENDPTLISTADDR = (uint32_t) _dcd_data.qhd; // Endpoint List Address has to be 2K alignment dcd_reg->USBSTS = dcd_reg->USBSTS; dcd_reg->USBINTR = INTR_USB | INTR_ERROR | INTR_PORT_CHANGE | INTR_SUSPEND; @@ -325,10 +296,6 @@ void dcd_sof_enable(uint8_t rhport, bool en) static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) { - // Force the CPU to flush the buffer. We increase the size by 31 because the call aligns the - // address to 32-byte boundaries. Buffer must be word aligned - dcd_dcache_clean_invalidate((uint32_t*) tu_align((uint32_t) data_ptr, 4), total_bytes + 31); - tu_memclr(p_qtd, sizeof(dcd_qtd_t)); p_qtd->next = QTD_NEXT_INVALID; @@ -402,8 +369,6 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) p_qhd->qtd_overlay.next = QTD_NEXT_INVALID; - dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); - // Enable EP Control uint32_t const epctrl = (p_endpoint_desc->bmAttributes.xfer << ENDPTCTRL_TYPE_POS) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; @@ -461,9 +426,6 @@ static void qhd_start_xfer(uint8_t rhport, uint8_t epnum, uint8_t dir) p_qhd->qtd_overlay.halted = false; // clear any previous error p_qhd->qtd_overlay.next = (uint32_t) p_qtd; // link qtd to qhd - // flush cache - dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); - if ( epnum == 0 ) { // follows UM 24.10.8.1.1 Setup packet handling using setup lockout mechanism @@ -539,8 +501,6 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 page++; } } - - dcd_dcache_clean_invalidate((uint32_t*) tu_align((uint32_t) fifo_info.ptr_wrap, 4), total_bytes - fifo_info.len_wrap + 31); } else { @@ -652,9 +612,6 @@ void dcd_int_handler(uint8_t rhport) if (int_status & INTR_USB) { - // Make sure we read the latest version of _dcd_data. - dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); - uint32_t const edpt_complete = dcd_reg->ENDPTCOMPLETE; dcd_reg->ENDPTCOMPLETE = edpt_complete; // acknowledge -- cgit v1.3.1 From 3351c366ab8298c342b2802c28d65a67f4078d56 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 20:48:09 +0100 Subject: Restore DCache clean/invalidate. Signed-off-by: HiFiPhile --- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 52 +++++++++++++++++++++++++++++++ src/portable/chipidea/ci_hs/dcd_ci_hs.c | 29 ++++++++++------- 2 files changed, 69 insertions(+), 12 deletions(-) (limited to 'src/portable') diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index 201936e53..c53556f79 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -63,4 +63,56 @@ static const ci_hs_controller_t _ci_controller[] = #define CI_HCD_INT_ENABLE(_p) NVIC_EnableIRQ ((IRQn_Type)_ci_controller[_p].irqnum) #define CI_HCD_INT_DISABLE(_p) NVIC_DisableIRQ((IRQn_Type)_ci_controller[_p].irqnum) +//------------- DCache -------------// +#if CFG_TUD_MEM_DCACHE_ENABLE || CFG_TUH_MEM_DCACHE_ENABLE +#if __CORTEX_M == 7 +TU_ATTR_ALWAYS_INLINE static inline uint32_t round_up_to_cache_line_size(uint32_t size) { + if (size & (CFG_TUD_MEM_DCACHE_LINE_SIZE-1)) { + size = (size & ~(CFG_TUD_MEM_DCACHE_LINE_SIZE-1)) + CFG_TUD_MEM_DCACHE_LINE_SIZE; + } + return size; +} + +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_is_cache_mem(uintptr_t addr) { + return !(0x20000000 <= addr && addr < 0x20100000); +} + +bool dcd_dcache_clean(void const* addr, uint32_t data_size) { + const uintptr_t addr32 = (uintptr_t) addr; + if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); + data_size = round_up_to_cache_line_size(data_size); + SCB_CleanDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); + } + return true; +} + +bool dcd_dcache_invalidate(void const* addr, uint32_t data_size) { + const uintptr_t addr32 = (uintptr_t) addr; + if (imxrt_is_cache_mem(addr32)) { + // Invalidating does not push cached changes back to RAM so we need to be + // *very* careful when we do it. If we're not aligned, then we risk resetting + // values back to their RAM state. + TU_ASSERT(tu_is_aligned32(addr32)); + data_size = round_up_to_cache_line_size(data_size); + SCB_InvalidateDCache_by_Addr((void*) addr32, (int32_t) data_size); + } + return true; +} + +bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { + const uintptr_t addr32 = (uintptr_t) addr; + if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); + data_size = round_up_to_cache_line_size(data_size); + SCB_CleanInvalidateDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); + } + return true; +} + +#elif __CORTEX_M == 4 +#error "Secondary M4 core's cache controller is not supported yet." +#endif +#endif + #endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 6d6a74524..bacc1b99d 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -34,18 +34,6 @@ #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX #include "ci_hs_imxrt.h" - bool dcd_dcache_clean(void const* addr, uint32_t data_size) { - return imxrt_dcache_clean(addr, data_size); - } - - bool dcd_dcache_invalidate(void const* addr, uint32_t data_size) { - return imxrt_dcache_invalidate(addr, data_size); - } - - bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - return imxrt_dcache_clean_invalidate(addr, data_size); - } - #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) #include "ci_hs_lpc18_43.h" @@ -216,6 +204,8 @@ static void bus_reset(uint8_t rhport) _dcd_data.qhd[0][0].qtd_overlay.next = _dcd_data.qhd[0][1].qtd_overlay.next = QTD_NEXT_INVALID; _dcd_data.qhd[0][0].int_on_setup = 1; // OUT only + + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); } bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { @@ -241,6 +231,8 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; #endif + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); + dcd_reg->ENDPTLISTADDR = (uint32_t) _dcd_data.qhd; // Endpoint List Address has to be 2K alignment dcd_reg->USBSTS = dcd_reg->USBSTS; dcd_reg->USBINTR = INTR_USB | INTR_ERROR | INTR_PORT_CHANGE | INTR_SUSPEND; @@ -307,6 +299,8 @@ void dcd_sof_enable(uint8_t rhport, bool en) static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) { + dcd_dcache_clean_invalidate((uint32_t*) tu_align((uint32_t) data_ptr, 4), total_bytes); + tu_memclr(p_qtd, sizeof(dcd_qtd_t)); p_qtd->next = QTD_NEXT_INVALID; @@ -380,6 +374,8 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) p_qhd->qtd_overlay.next = QTD_NEXT_INVALID; + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); + // Enable EP Control uint32_t const epctrl = (p_endpoint_desc->bmAttributes.xfer << ENDPTCTRL_TYPE_POS) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; @@ -437,6 +433,9 @@ static void qhd_start_xfer(uint8_t rhport, uint8_t epnum, uint8_t dir) p_qhd->qtd_overlay.halted = false; // clear any previous error p_qhd->qtd_overlay.next = (uint32_t) p_qtd; // link qtd to qhd + // flush cache + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); + if ( epnum == 0 ) { // follows UM 24.10.8.1.1 Setup packet handling using setup lockout mechanism @@ -466,7 +465,9 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t return true; } +#if !CFG_TUD_MEM_DCACHE_ENABLE // fifo has to be aligned to 4k boundary +// It's imcompatible with dcache enabled transfer, since neither address nor size is aligned to cache line bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); @@ -526,6 +527,7 @@ bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16 return true; } +#endif //--------------------------------------------------------------------+ // ISR @@ -623,6 +625,9 @@ void dcd_int_handler(uint8_t rhport) if (int_status & INTR_USB) { + // Make sure we read the latest version of _dcd_data. + dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); + uint32_t const edpt_complete = dcd_reg->ENDPTCOMPLETE; dcd_reg->ENDPTCOMPLETE = edpt_complete; // acknowledge -- cgit v1.3.1 From 0bca377d5210833ac259db6ed9d7d96c724f3e6e Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 21:57:47 +0100 Subject: Fix typo. Signed-off-by: HiFiPhile --- src/class/audio/audio_device.c | 8 ++++---- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'src/portable') diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 2add741a8..425da4483 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -81,7 +81,7 @@ // Only STM32 and dcd_transdimension use non-linear buffer for now // dwc2 except esp32sx (since it may use dcd_esp32sx) -// Ring buffer is imcompatible with dcache, since neither address nor size is aligned to cache line +// Ring buffer is incompatible with dcache, since neither address nor size is aligned to cache line #if (defined(TUP_USBIP_DWC2) && !TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)) || \ defined(TUP_USBIP_FSDEV) || \ CFG_TUSB_MCU == OPT_MCU_RX63X || \ @@ -179,13 +179,13 @@ tu_static OUT_SW_BUF_MEM_ATTR struct { #if CFG_FIFO_MUTEX #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_wr_1; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_1; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_wr_2; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_2; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - tu_static osal_mutex_def_t ep_out_ff_mutex_wr_3; + tu_static osal_mutex_def_t ep_out_ff_mutex_rd_3; #endif #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index bacc1b99d..331fbfe80 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -467,7 +467,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t #if !CFG_TUD_MEM_DCACHE_ENABLE // fifo has to be aligned to 4k boundary -// It's imcompatible with dcache enabled transfer, since neither address nor size is aligned to cache line +// It's incompatible with dcache enabled transfer, since neither address nor size is aligned to cache line bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); -- cgit v1.3.1 From 0d9a24c416cce6fc7201d9201dc131ec2b2110c3 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 30 Nov 2024 23:18:22 +0100 Subject: Fix HCD build. Signed-off-by: HiFiPhile --- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 6 +++--- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 14 ++++++++++++++ src/portable/chipidea/ci_hs/hcd_ci_hs.c | 2 ++ 3 files changed, 19 insertions(+), 3 deletions(-) (limited to 'src/portable') diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index c53556f79..75d1d55b8 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -77,7 +77,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool imxrt_is_cache_mem(uintptr_t addr) { return !(0x20000000 <= addr && addr < 0x20100000); } -bool dcd_dcache_clean(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { TU_ASSERT(tu_is_aligned32(addr32)); @@ -87,7 +87,7 @@ bool dcd_dcache_clean(void const* addr, uint32_t data_size) { return true; } -bool dcd_dcache_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { // Invalidating does not push cached changes back to RAM so we need to be @@ -100,7 +100,7 @@ bool dcd_dcache_invalidate(void const* addr, uint32_t data_size) { return true; } -bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { TU_ASSERT(tu_is_aligned32(addr32)); diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 331fbfe80..a716dc24c 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -34,6 +34,20 @@ #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX #include "ci_hs_imxrt.h" +#if CFG_TUD_MEM_DCACHE_ENABLE +bool dcd_dcache_clean(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean(addr, data_size); +} + +bool dcd_dcache_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_invalidate(addr, data_size); +} + +bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean_invalidate(addr, data_size); +} +#endif + #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) #include "ci_hs_lpc18_43.h" diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 14f8acb45..c4c342a70 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -42,6 +42,7 @@ #include "ci_hs_imxrt.h" +#if CFG_TUH_MEM_DCACHE_ENABLE bool hcd_dcache_clean(void const* addr, uint32_t data_size) { return imxrt_dcache_clean(addr, data_size); } @@ -53,6 +54,7 @@ bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { return imxrt_dcache_clean_invalidate(addr, data_size); } +#endif #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) -- cgit v1.3.1 From 3653c23240046a99d8b846b65d875589f0edcd16 Mon Sep 17 00:00:00 2001 From: Scott Shawcroft Date: Mon, 2 Dec 2024 12:32:39 -0800 Subject: Disable DWC HCD interrupt with MAX3421 enabled hcd_int_handler isn't found otherwise. --- src/portable/synopsys/dwc2/dwc2_esp32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_esp32.h b/src/portable/synopsys/dwc2/dwc2_esp32.h index ddbfd0d10..3309760ff 100644 --- a/src/portable/synopsys/dwc2/dwc2_esp32.h +++ b/src/portable/synopsys/dwc2/dwc2_esp32.h @@ -73,7 +73,7 @@ static void dwc2_int_handler_wrap(void* arg) { dcd_int_handler(rhport); } #endif -#if CFG_TUH_ENABLED +#if CFG_TUH_ENABLED && !CFG_TUH_MAX3421 if (role == TUSB_ROLE_HOST) { hcd_int_handler(rhport, true); } -- cgit v1.3.1 From d502a0c481b7e0e742e2997f0d3fb5ef9f4eb9d4 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Dec 2024 15:02:02 +0700 Subject: fix correct DWC2_EP_COUNT --- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index bde48ef57..c461d9a79 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -44,7 +44,7 @@ #if TU_CHECK_MCU(OPT_MCU_GD32VF103) #define DWC2_EP_COUNT(_dwc2) DWC2_EP_MAX #else - #define DWC2_EP_COUNT(_dwc2) ((_dwc2)->ghwcfg2_bm.num_dev_ep) + #define DWC2_EP_COUNT(_dwc2) ((_dwc2)->ghwcfg2_bm.num_dev_ep + 1) #endif //--------------------------------------------------------------------+ -- cgit v1.3.1 From 80224770316966e4339d414c60aea6a5020caa16 Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 00:36:31 +0800 Subject: dcd_pic: add readme --- src/portable/microchip/pic/README.md | 51 ++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 src/portable/microchip/pic/README.md (limited to 'src/portable') diff --git a/src/portable/microchip/pic/README.md b/src/portable/microchip/pic/README.md new file mode 100644 index 000000000..7ba6a4a96 --- /dev/null +++ b/src/portable/microchip/pic/README.md @@ -0,0 +1,51 @@ +# Microchip PIC Chipidea FS Driver + +This driver adds support for Microchip PIC microcontrollers with full-speed Chipidea USB peripheral to the TinyUSB stack. It supports the following families: + +- PIC32MX (untested) +- PIC32MM +- PIC32MK (untested) +- PIC24FJ +- PIC24EP (untested) +- dsPIC33EP (untested) + +Currently only the device mode is supported. + + +## Important Notes + +### Handling of shared VBUS & GPIO pin + +Some PICs have the USB VBUS pin bonded with a GPIO pin in the chip package. This driver does **NOT** handle the potential conflict between the VBUS and GPIO functionalities. + +Developers must ensure that the GPIO pin is tristated when the VBUS pin is managed by the USB peripheral in order to prevent damaging the chip. + +This design choice allows developers the flexibility to use the GPIO functionality for controlling VBUS in device mode if desired. + + +## TODO + +### Handle USB remote wakeup timing correctly + +The Chipidea FS IP doesn't handle the RESUME signal automatically and it must be managed in software. It needs to be asserted for exactly 10ms, and this is impossible to do without per-device support due to BSP differences. For now, a simple for-based loop is used. + +### 8-bit PIC support + +The 8-bit PICs also uses the Chipidea FS IP. Technically it's possible to support them as well. + +Possible difficulties: +- Memory size constraints (1KB/8KB ballpark) +- A third BDT layout (now we have two) +- Different compiler-specific directives +- Compiler bugs if you use SDCC + + +## Author +[ReimuNotMoe](https://github.com/ReimuNotMoe) at SudoMaker, Ltd. + + +## Credits + +This driver is based on: +- Microchip's USB driver (usb_device.c) +- TinyUSB's NXP KHCI driver (dcd_khci.c) -- cgit v1.3.1 From 99e6b32a7da695f16a2fed93c59bfa0d5a1952dc Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 00:36:42 +0800 Subject: dcd_pic: change license header and credit people accordingly --- src/portable/microchip/pic/dcd_pic.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index d40c4794a..461c65259 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -1,8 +1,11 @@ /* * The MIT License (MIT) * - * Copyright (c) 2020 Koji Kitayama - * Copyright (c) 2022 Reimu NotMoe + * Copyright (c) 2022-2024 SudoMaker, Ltd. + * Author: Mike Yang (Reimu NotMoe) + * + * Based on usb_device.c - Copyright (c) 2015 Microchip Technology Inc. + * Based on dcd_khci.c - Copyright (c) 2020 Koji Kitayama * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal -- cgit v1.3.1 From 8907a817a2a782423bf8d6db2136147b6e334225 Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 00:50:32 +0800 Subject: dcd_pic: handle bus resume correctly --- src/portable/microchip/pic/dcd_pic.c | 58 ++++++++++++++++++++++++++++++------ 1 file changed, 49 insertions(+), 9 deletions(-) (limited to 'src/portable') diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 461c65259..0dac18523 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -741,8 +741,11 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) //--------------------------------------------------------------------+ void dcd_int_handler(uint8_t rhport) { - uint32_t is = U1IR; - uint32_t msk = U1IE; + uint32_t is, msk; + + // Part 1 - "USB interrupts" + is = U1IR; + msk = U1IE; U1IR = is & ~msk; is &= msk; @@ -750,7 +753,7 @@ void dcd_int_handler(uint8_t rhport) if (is & _U1IR_UERRIF_MASK) { uint32_t es = U1EIR; U1EIR = es; - U1IR = is; /* discard any pending events */ + U1IR = is; /* discard any pending events */ } if (is & _U1IR_URSTIF_MASK) { @@ -761,29 +764,66 @@ void dcd_int_handler(uint8_t rhport) if (is & _U1IR_IDLEIF_MASK) { // Note Host usually has extra delay after bus reset (without SOF), which could falsely // detected as Sleep event. Though usbd has debouncing logic so we are good + + /* + * NOTE: Do not clear U1OTGIRbits.ACTVIF here! + * Reason: + * ACTVIF is only generated once an IDLEIF has been generated. + * This is a 1:1 ratio interrupt generation. + * For every IDLEIF, there will be only one ACTVIF regardless of + * the number of subsequent bus transitions. + * + * If the ACTIF is cleared here, a problem could occur when: + * [ IDLE ][bus activity -> + * <--- 3 ms -----> ^ + * ^ ACTVIF=1 + * IDLEIF=1 + * # # # # (#=Program polling flags) + * ^ + * This polling loop will see both + * IDLEIF=1 and ACTVIF=1. + * However, the program services IDLEIF first + * because ACTIVIE=0. + * If this routine clears the only ACTIVIF, + * then it can never get out of the suspend + * mode. + */ + U1OTGIESET = _U1OTGIE_ACTVIE_MASK; U1IR = _U1IR_IDLEIF_MASK; process_bus_sleep(rhport); } - if (is & _U1IR_RESUMEIF_MASK) { - U1IR = _U1IR_RESUMEIF_MASK; - process_bus_resume(rhport); - } - if (is & _U1IR_SOFIF_MASK) { U1IR = _U1IR_SOFIF_MASK; dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); } if (is & _U1IR_STALLIF_MASK) { - U1IR = _U1IR_STALLIF_MASK; process_stall(rhport); + U1IR = _U1IR_STALLIF_MASK; } if (is & _U1IR_TRNIF_MASK) { process_tokdne(rhport); } + // Part 2 - "USB OTG interrupts" + is = U1OTGIR; + msk = U1OTGIE; + + U1OTGIR = is & ~msk; + is &= msk; + + if (is & _U1OTGIR_ACTVIF_MASK) { +#if TU_PIC_INT_SIZE == 4 + U1OTGIECLR = _U1OTGIE_ACTVIE_MASK; +#else + U1OTGIE &= ~_U1OTGIE_ACTVIE_MASK; +#endif + U1OTGIR = _U1OTGIR_ACTVIF_MASK; + process_bus_resume(rhport); + } + intr_clear(rhport); } -- cgit v1.3.1 From f409472998cfba4f6be0534912c1afd48e0d6816 Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 00:57:22 +0800 Subject: dcd_pic: handle remote wakeup more correctly --- src/portable/microchip/pic/dcd_pic.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 0dac18523..9ffeb0811 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -532,8 +532,25 @@ void dcd_remote_wakeup(uint8_t rhport) #else U1CONbits.RESUME = 1; #endif - unsigned cnt = 25000000 / 1000; + + // FIXME: Assert RESUME signal correctly, requires device-specific handling + // For now we use a hardcoded cycle-based delay which attempts to delay 10ms + // at the most common CPU frequencies. On PIC32s we assume the loop body + // takes 3 cycles. On 16-bit PICs we assume the XC16 compiler is in use and + // use its `__delay_ms' function. + +#if CFG_TUSB_MCU == OPT_MCU_PIC32MM + uint32_t cnt = 24000000 / 1000 / 3; + while (cnt--) asm volatile("nop"); +#elif CFG_TUSB_MCU == OPT_MCU_PIC32MX + uint32_t cnt = 40000000 / 1000 / 3; while (cnt--) asm volatile("nop"); +#elif CFG_TUSB_MCU == OPT_MCU_PIC32MK + uint32_t cnt = 120000000 / 1000 / 3; + while (cnt--) asm volatile("nop"); +#else + __delay_ms(10); +#endif #if TU_PIC_INT_SIZE == 4 U1CONCLR = _U1CON_RESUME_MASK; -- cgit v1.3.1 From 0192b2a9b0a8a7a300326c27ebd59f15cb34790e Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 00:59:45 +0800 Subject: dcd_pic: implement dcd_deinit() --- src/portable/microchip/pic/dcd_pic.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'src/portable') diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 9ffeb0811..04c54059f 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -508,6 +508,19 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } +bool dcd_deinit(uint8_t rhport) +{ + U1CON = 0; + U1IE = 0; + U1OTGIE = 0; +#if TU_PIC_INT_SIZE == 4 + U1PWRCCLR = _U1PWRC_USUSPEND_MASK | _U1PWRC_USBPWR_MASK; +#else + U1PWRC &= ~(_U1PWRC_USUSPEND_MASK | _U1PWRC_USBPWR_MASK); +#endif + return true; +} + void dcd_int_enable(uint8_t rhport) { intr_enable(rhport); -- cgit v1.3.1 From 6e1140683140eb7bb80dfae0d207a920dec6d12c Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 01:02:10 +0800 Subject: dcd_pic: handle EP0 timeout/stall correctly --- src/portable/microchip/pic/dcd_pic.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 04c54059f..4e0bd735e 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -316,12 +316,23 @@ static void prepare_next_setup_packet(uint8_t rhport) { const unsigned out_odd = _dcd.endpoint[0][0].odd; const unsigned in_odd = _dcd.endpoint[0][1].odd; - TU_ASSERT(0 == _dcd.bdt[0][0][out_odd].own, ); + + // Abandon any previous control transfers that might have been using EP0. + // Ordinarily, nothing actually needs abandoning, since the previous control + // transfer would have completed successfully prior to the host sending the + // next SETUP packet. However, in a timeout error case, or after an EP0 + // STALL event, one or more UOWN bits might still be set. If so, we should + // clear the UOWN bits, so the EP0 IN/OUT endpoints are in a known inactive + // state, ready for re-arming by the `dcd_edpt_xfer' function that will be + // called next. _dcd.bdt[0][0][out_odd].data = 0; + _dcd.bdt[0][0][out_odd].own = 0; _dcd.bdt[0][0][out_odd ^ 1].data = 1; _dcd.bdt[0][1][in_odd].data = 1; + _dcd.bdt[0][1][in_odd].own = 0; _dcd.bdt[0][1][in_odd ^ 1].data = 0; + _dcd.bdt[0][1][in_odd ^ 1].own = 0; dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), _dcd.setup_packet, sizeof(_dcd.setup_packet)); } -- cgit v1.3.1 From a4169114ec6acb07cf8e26a1718e61c0c7af69fa Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 01:04:29 +0800 Subject: dcd_pic: let the user manage shared GPIO/VBUS pin --- src/portable/microchip/pic/dcd_pic.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'src/portable') diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 4e0bd735e..a4fa0e840 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -489,10 +489,6 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { intr_disable(rhport); intr_clear(rhport); -#if CFG_TUSB_MCU == OPT_MCU_PIC32MM - TRISBbits.TRISB6 = 1; -#endif - tu_memclr(&_dcd, sizeof(_dcd)); #if TU_PIC_INT_SIZE == 4 -- cgit v1.3.1 From 655092d568720188a3a34b9376a7ebcf274dab79 Mon Sep 17 00:00:00 2001 From: Reimu NotMoe Date: Fri, 27 Dec 2024 04:17:26 +0800 Subject: dcd_pic: check USBBUSY bit on PIC32s --- src/portable/microchip/pic/dcd_pic.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'src/portable') diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index a4fa0e840..b4a698199 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -492,6 +492,9 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_memclr(&_dcd, sizeof(_dcd)); #if TU_PIC_INT_SIZE == 4 + // The USBBUSY bit is present on PIC32s and we're required to check it + // prior to powering on the USB peripheral (see DS61126F page 27) + while (U1PWRCbits.USBBUSY); U1PWRCSET = _U1PWRC_USBPWR_MASK; #else U1PWRCbits.USBPWR = 1; -- cgit v1.3.1 From b91d5ebb4509d02d108e249197884913698aac1c Mon Sep 17 00:00:00 2001 From: pschatzmann Date: Sat, 4 Jan 2025 22:20:46 +0100 Subject: rp2040 correct dcd_edpt_iso_activate --- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'src/portable') diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index af08b549d..b91dd38d5 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -496,6 +496,12 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) { (void) rhport; const uint8_t ep_addr = ep_desc->bEndpointAddress; + + // init w/o allocate + const uint16_t mps = ep_desc->wMaxPacketSize; + uint16_t size = (uint16_t)tu_div_ceil(mps, 64) * 64u; + hw_endpoint_init(ep_addr, size, TUSB_XFER_ISOCHRONOUS); + // Fill in endpoint control register with buffer offset struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_addr); TU_ASSERT(ep->hw_data_buf != NULL); // must be inited and buffer allocated -- cgit v1.3.1 From 5b32df5abd5667bce7541bed62658750d7f68232 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 Jan 2025 22:47:32 +0700 Subject: add s3 undefined speed note for racing issue with reset. fix dcd_event_sof() with frame number --- hw/bsp/espressif/boards/family.c | 12 +++--------- src/portable/nxp/khci/dcd_khci.c | 2 +- 2 files changed, 4 insertions(+), 10 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 26e415d94..2f9ecfe4d 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -175,20 +175,14 @@ bool usb_init(void) { // maybe we can use USB_OTG_MODE_DEFAULT and switch using dwc2 driver #if CFG_TUD_ENABLED .otg_mode = USB_OTG_MODE_DEVICE, - .otg_speed = BOARD_TUD_RHPORT ? USB_PHY_SPEED_HIGH : USB_PHY_SPEED_FULL, #elif CFG_TUH_ENABLED .otg_mode = USB_OTG_MODE_HOST, - .otg_speed= BOARD_TUH_RHPORT ? USB_PHY_SPEED_HIGH : USB_PHY_SPEED_FULL, #endif + // https://github.com/hathach/tinyusb/issues/2943#issuecomment-2601888322 + // Set speed to undefined (auto-detect) to avoid timinng/racing issue with S3 with host such as macOS + .otg_speed = USB_PHY_SPEED_UNDEFINED, }; - // OTG IOs config - // const usb_phy_otg_io_conf_t otg_io_conf = USB_PHY_SELF_POWERED_DEVICE(config->vbus_monitor_io); - // if (config->self_powered) { - // phy_conf.otg_io_conf = &otg_io_conf; - // } - // ESP_RETURN_ON_ERROR(usb_new_phy(&phy_conf, &phy_hdl), TAG, "Install USB PHY failed"); - usb_new_phy(&phy_conf, &phy_hdl); return true; diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 8398b09bf..3d5e195a9 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -565,7 +565,7 @@ void dcd_int_handler(uint8_t rhport) if (is & USB_ISTAT_SOFTOK_MASK) { KHCI->ISTAT = USB_ISTAT_SOFTOK_MASK; - dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); + dcd_event_sof(rhport, tu_u16(KHCI->FRMNUMH, KHCI->FRMNUML), true); } if (is & USB_ISTAT_STALL_MASK) { -- cgit v1.3.1 From 31071ccf0e27cc8b77ddb41417665ea82b2b9b35 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 23 Jan 2025 17:10:01 +0700 Subject: kind of work with zephyr with pca10056 with cmake -DBUILD_ZEPHYR --- .idea/cmake.xml | 3 +- .west/config | 2 +- examples/build_system/cmake/toolchain/common.cmake | 4 + examples/device/video_capture/src/main.c | 2 +- examples/host/msc_file_explorer/src/main.c | 6 +- examples/host/msc_file_explorer/src/msc_app.c | 20 +- examples/host/msc_file_explorer/src/msc_app.h | 35 +++ examples/west.yml | 12 - hw/bsp/family_support.cmake | 18 +- hw/bsp/nrf/boards/pca10095/board.cmake | 2 +- hw/bsp/nrf/family.c | 29 +- hw/bsp/nrf/family.cmake | 47 ++-- hw/bsp/nrf/family.mk | 32 +-- hw/bsp/nrf/nrfx_config.h | 46 ---- hw/bsp/nrf/nrfx_config/nrfx_config.h | 46 ++++ hw/bsp/nrf/nrfx_config/nrfx_glue.h | 294 +++++++++++++++++++++ hw/bsp/nrf/nrfx_config/nrfx_log.h | 135 ++++++++++ hw/bsp/nrf/nrfx_glue.h | 294 --------------------- hw/bsp/nrf/nrfx_log.h | 135 ---------- src/portable/nordic/nrf5x/dcd_nrf5x.c | 14 +- 20 files changed, 597 insertions(+), 579 deletions(-) create mode 100644 examples/host/msc_file_explorer/src/msc_app.h delete mode 100644 examples/west.yml delete mode 100644 hw/bsp/nrf/nrfx_config.h create mode 100644 hw/bsp/nrf/nrfx_config/nrfx_config.h create mode 100644 hw/bsp/nrf/nrfx_config/nrfx_glue.h create mode 100644 hw/bsp/nrf/nrfx_config/nrfx_log.h delete mode 100644 hw/bsp/nrf/nrfx_glue.h delete mode 100644 hw/bsp/nrf/nrfx_log.h (limited to 'src/portable') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index e4c189251..b1a987a24 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -85,7 +85,8 @@ - + + diff --git a/.west/config b/.west/config index 2518007f6..f6f0d7a3d 100644 --- a/.west/config +++ b/.west/config @@ -1,5 +1,5 @@ [manifest] -path = examples +path = lib/zephyr file = west.yml [zephyr] diff --git a/examples/build_system/cmake/toolchain/common.cmake b/examples/build_system/cmake/toolchain/common.cmake index 4c181137b..7fe0aac4b 100644 --- a/examples/build_system/cmake/toolchain/common.cmake +++ b/examples/build_system/cmake/toolchain/common.cmake @@ -1,3 +1,7 @@ +if (BUILD_ZEPHYR) + return() +endif() + include(CMakePrintHelpers) # ---------------------------------------------------------------------------- diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 8bb924c61..04d4af4e5 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -185,7 +185,7 @@ static void fill_color_bar(uint8_t* buffer, unsigned start_position) { #endif -void video_send_frame(void) { +static void video_send_frame(void) { static unsigned start_ms = 0; static unsigned already_sent = 0; diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 9509035b4..8197c3c8d 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -62,15 +62,13 @@ #include "bsp/board_api.h" #include "tusb.h" +#include "msc_app.h" + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ void led_blinking_task(void); -// from msc_app.c -extern bool msc_app_init(void); -extern void msc_app_task(void); - /*------------- MAIN -------------*/ int main(void) { board_init(); diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index 035d74689..226c870ea 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -67,7 +67,9 @@ bool cli_init(void); bool msc_app_init(void) { - for(size_t i=0; i 0 ) @@ -99,8 +103,7 @@ void msc_app_task(void) // //--------------------------------------------------------------------+ -bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; @@ -294,18 +297,11 @@ void cli_cmd_mkdir(EmbeddedCli *cli, char *args, void *context); void cli_cmd_mv(EmbeddedCli *cli, char *args, void *context); void cli_cmd_rm(EmbeddedCli *cli, char *args, void *context); -void cli_write_char(EmbeddedCli *cli, char c) -{ +static void cli_write_char(EmbeddedCli *cli, char c) { (void) cli; putchar((int) c); } -void cli_cmd_unknown(EmbeddedCli *cli, CliCommand *command) -{ - (void) cli; - printf("%s: command not found\r\n", command->name); -} - bool cli_init(void) { EmbeddedCliConfig *config = embeddedCliDefaultConfig(); diff --git a/examples/host/msc_file_explorer/src/msc_app.h b/examples/host/msc_file_explorer/src/msc_app.h new file mode 100644 index 000000000..3ba03d0dc --- /dev/null +++ b/examples/host/msc_file_explorer/src/msc_app.h @@ -0,0 +1,35 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef MSC_APP_H +#define MSC_APP_H + +#include + +bool msc_app_init(void); +void msc_app_task(void); + + +#endif diff --git a/examples/west.yml b/examples/west.yml deleted file mode 100644 index 4e2160202..000000000 --- a/examples/west.yml +++ /dev/null @@ -1,12 +0,0 @@ -manifest: - remotes: - - name: zephyrproject-rtos - url-base: https://github.com/zephyrproject-rtos - projects: - - name: zephyr - remote: zephyrproject-rtos - revision: v4.0.0 - path: lib/zephyr - import: true - self: - path: . diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 15baf0294..e32bb1689 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -170,7 +170,7 @@ function(family_add_rtos TARGET RTOS) elseif (RTOS STREQUAL "zephyr") target_compile_definitions(${TARGET} PUBLIC CFG_TUSB_OS=OPT_OS_ZEPHYR) target_include_directories(${TARGET} PUBLIC ${ZEPHYR_BASE}/include) - target_link_libraries(${TARGET} PUBLIC zephyr_interface kernel) +# target_link_libraries(${TARGET} PUBLIC kernel) endif () endfunction() @@ -201,12 +201,9 @@ function(family_configure_common TARGET RTOS) target_compile_definitions(${TARGET} PUBLIC LOGGER_${LOGGER}) # Add segger rtt to example if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt") - if (NOT TARGET segger_rtt) - add_library(segger_rtt STATIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) - target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) -# target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) - endif() - target_link_libraries(${TARGET} PUBLIC segger_rtt) + target_sources(${TARGET} PUBLIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) + target_include_directories(${TARGET} PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) +# target_compile_definitions(${TARGET} PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) endif () endif () @@ -239,7 +236,8 @@ function(family_configure_common TARGET RTOS) -Wmissing-prototypes ) target_link_options(${TARGET} PUBLIC "LINKER:-Map=$.map") - if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 AND NO_WARN_RWX_SEGMENTS_SUPPORTED) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 + AND NO_WARN_RWX_SEGMENTS_SUPPORTED AND (NOT BUILD_ZEPHYR)) target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") endif () elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") @@ -255,7 +253,7 @@ function(family_configure_common TARGET RTOS) # endif () endfunction() -# Add tinyusb to target with RTOS +# Add tinyusb to target (TODO remove RTOS) function(family_add_tinyusb TARGET OPT_MCU RTOS) # tinyusb's CMakeList.txt add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb) @@ -364,7 +362,7 @@ function(family_add_default_example_warnings TARGET) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") if (CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 12.0 AND NO_WARN_RWX_SEGMENTS_SUPPORTED) -# target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") + target_link_options(${TARGET} PUBLIC "LINKER:--no-warn-rwx-segments") endif() # GCC 10 diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index 95dd30969..6d183dde6 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -2,6 +2,6 @@ set(MCU_VARIANT nrf5340_application) function(update_board TARGET) target_sources(${TARGET} PRIVATE - ${NRFX_DIR}/drivers/src/nrfx_usbreg.c + ${NRFX_PATH}/drivers/src/nrfx_usbreg.c ) endfunction() diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 2c3413b9e..298ca2302 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -44,10 +44,10 @@ #include "nrfx.h" #include "hal/nrf_gpio.h" -#include "drivers/include/nrfx_gpiote.h" -#include "drivers/include/nrfx_power.h" -#include "drivers/include/nrfx_uarte.h" -#include "drivers/include/nrfx_spim.h" +#include "nrfx_gpiote.h" +#include "nrfx_power.h" +#include "nrfx_uarte.h" +#include "nrfx_spim.h" #ifdef SOFTDEVICE_PRESENT #include "nrf_sdm.h" @@ -67,8 +67,6 @@ #define NRFX_VER 3 #endif -extern void nrfx_isr(const void *irq_handler); - //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -148,12 +146,10 @@ void board_init(void) { // irq_enable(USBREGULATOR_IRQn); #endif - // IRQ_CONNECT(CLOCK_POWER_IRQn, 0, nrfx_isr, nrfx_power_irq_handler, 0); - /* USB device controller access from devicetree */ - // #define DT_DRV_COMPAT nordic_nrf_usbd - // IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), nrfx_isr, nrf_usbd_common_irq_handler, 0); - + #define DT_DRV_COMPAT nordic_nrf_usbd + IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), nrfx_isr, USBD_IRQHandler, 0); + irq_enable(DT_INST_IRQN(0)); #endif // UART @@ -187,7 +183,7 @@ void board_init(void) { }; #endif - nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); + nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //------------- USB -------------// #if CFG_TUD_ENABLED @@ -231,8 +227,12 @@ void board_init(void) { #endif } - if ( usb_reg & VBUSDETECT_Msk ) tusb_hal_nrf_power_event(USB_EVT_DETECTED); - if ( usb_reg & OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(USB_EVT_READY); + if ( usb_reg & VBUSDETECT_Msk ) { + tusb_hal_nrf_power_event(USB_EVT_DETECTED); + } + if ( usb_reg & OUTPUTRDY_Msk ) { + tusb_hal_nrf_power_event(USB_EVT_READY); + } #endif #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 @@ -244,7 +244,6 @@ void board_init(void) { //--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ - void board_led_write(bool state) { nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); } diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 30561cdf5..1e7a4fe82 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -1,6 +1,6 @@ include_guard() -set(NRFX_DIR ${TOP}/hw/mcu/nordic/nrfx) +set(NRFX_PATH ${TOP}/hw/mcu/nordic/nrfx) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # include board specific @@ -25,6 +25,10 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) + if (BUILD_ZEPHYR) + return() + endif () + if (TARGET ${BOARD_TARGET}) return() endif () @@ -40,18 +44,18 @@ function(add_board_target BOARD_TARGET) endif () if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) + set(STARTUP_FILE_GNU ${NRFX_PATH}/mdk/gcc_startup_${MCU_VARIANT}.S) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) endif () add_library(${BOARD_TARGET} STATIC - ${NRFX_DIR}/helpers/nrfx_flag32_allocator.c - ${NRFX_DIR}/drivers/src/nrfx_gpiote.c - ${NRFX_DIR}/drivers/src/nrfx_power.c - ${NRFX_DIR}/drivers/src/nrfx_spim.c - ${NRFX_DIR}/drivers/src/nrfx_uarte.c - ${NRFX_DIR}/mdk/system_${MCU_VARIANT}.c - ${NRFX_DIR}/soc/nrfx_atomic.c + ${NRFX_PATH}/helpers/nrfx_flag32_allocator.c + ${NRFX_PATH}/drivers/src/nrfx_gpiote.c + ${NRFX_PATH}/drivers/src/nrfx_power.c + ${NRFX_PATH}/drivers/src/nrfx_spim.c + ${NRFX_PATH}/drivers/src/nrfx_uarte.c + ${NRFX_PATH}/mdk/system_${MCU_VARIANT}.c + ${NRFX_PATH}/soc/nrfx_atomic.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) string(TOUPPER "${MCU_VARIANT_XXAA}" MCU_VARIANT_XXAA_UPPER) @@ -67,12 +71,10 @@ function(add_board_target BOARD_TARGET) endif () target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${NRFX_DIR} - ${NRFX_DIR}/mdk - ${NRFX_DIR}/hal - ${NRFX_DIR}/drivers/include - ${NRFX_DIR}/drivers/src + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/nrfx_config + ${NRFX_PATH} + ${NRFX_PATH}/mdk + ${NRFX_PATH}/drivers/include ${CMSIS_DIR}/CMSIS/Core/Include ) @@ -81,14 +83,14 @@ function(add_board_target BOARD_TARGET) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_DIR}/mdk + -L${NRFX_PATH}/mdk --specs=nosys.specs --specs=nano.specs -nostartfiles ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - -L${NRFX_DIR}/mdk + -L${NRFX_PATH}/mdk ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC @@ -113,6 +115,9 @@ endfunction() function(family_configure_example TARGET RTOS) # Board target add_board_target(board_${BOARD}) + if (NOT BUILD_ZEPHYR) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + endif () family_configure_common(${TARGET} ${RTOS}) @@ -132,16 +137,10 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS}) - target_sources(${TARGET} PUBLIC + target_sources(${TARGET} PRIVATE ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c ) -# if (BUILD_ZEPHYR) -# target_link_libraries(${TARGET} PUBLIC zephyr_interface kernel) -# elseif () - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) -# endif () - # Flashing # family_add_bin_hex(${TARGET}) family_flash_jlink(${TARGET}) diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk index b3c05e6db..f5a3f5c45 100644 --- a/hw/bsp/nrf/family.mk +++ b/hw/bsp/nrf/family.mk @@ -1,6 +1,6 @@ UF2_FAMILY_ID = 0xADA52840 -NRFX_DIR = hw/mcu/nordic/nrfx +NRFX_PATH = hw/mcu/nordic/nrfx include $(TOP)/$(BOARD_PATH)/board.mk @@ -28,31 +28,31 @@ CFLAGS_GCC += \ LDFLAGS_GCC += \ -nostartfiles \ --specs=nosys.specs --specs=nano.specs \ - -L$(TOP)/${NRFX_DIR}/mdk + -L$(TOP)/${NRFX_PATH}/mdk LDFLAGS_CLANG += \ - -L$(TOP)/${NRFX_DIR}/mdk \ + -L$(TOP)/${NRFX_PATH}/mdk \ SRC_C += \ src/portable/nordic/nrf5x/dcd_nrf5x.c \ - ${NRFX_DIR}/helpers/nrfx_flag32_allocator.c \ - ${NRFX_DIR}/drivers/src/nrfx_gpiote.c \ - ${NRFX_DIR}/drivers/src/nrfx_power.c \ - ${NRFX_DIR}/drivers/src/nrfx_spim.c \ - ${NRFX_DIR}/drivers/src/nrfx_uarte.c \ - ${NRFX_DIR}/mdk/system_$(MCU_VARIANT).c \ - ${NRFX_DIR}/soc/nrfx_atomic.c + ${NRFX_PATH}/helpers/nrfx_flag32_allocator.c \ + ${NRFX_PATH}/drivers/src/nrfx_gpiote.c \ + ${NRFX_PATH}/drivers/src/nrfx_power.c \ + ${NRFX_PATH}/drivers/src/nrfx_spim.c \ + ${NRFX_PATH}/drivers/src/nrfx_uarte.c \ + ${NRFX_PATH}/mdk/system_$(MCU_VARIANT).c \ + ${NRFX_PATH}/soc/nrfx_atomic.c INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/${NRFX_DIR} \ - $(TOP)/${NRFX_DIR}/mdk \ - $(TOP)/${NRFX_DIR}/hal \ - $(TOP)/${NRFX_DIR}/drivers/include \ - $(TOP)/${NRFX_DIR}/drivers/src \ + $(TOP)/${NRFX_PATH} \ + $(TOP)/${NRFX_PATH}/mdk \ + $(TOP)/${NRFX_PATH}/hal \ + $(TOP)/${NRFX_PATH}/drivers/include \ + $(TOP)/${NRFX_PATH}/drivers/src \ -SRC_S += ${NRFX_DIR}/mdk/gcc_startup_$(MCU_VARIANT).S +SRC_S += ${NRFX_PATH}/mdk/gcc_startup_$(MCU_VARIANT).S ASFLAGS += -D__HEAP_SIZE=0 diff --git a/hw/bsp/nrf/nrfx_config.h b/hw/bsp/nrf/nrfx_config.h deleted file mode 100644 index fbec4192b..000000000 --- a/hw/bsp/nrf/nrfx_config.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef NRFX_CONFIG_H__ -#define NRFX_CONFIG_H__ - -#define NRFX_POWER_ENABLED 1 -#define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 - -#define NRFX_CLOCK_ENABLED 0 -#define NRFX_GPIOTE_ENABLED 1 -#define NRFX_GPIOTE0_ENABLED 1 - -#define NRFX_UARTE_ENABLED 1 -#define NRFX_UARTE0_ENABLED 1 - -#define NRFX_SPIM_ENABLED 1 -#define NRFX_SPIM1_ENABLED 1 // use SPI1 since nrf5340 share uart with spi - -#define NRFX_PRS_ENABLED 0 -#define NRFX_USBREG_ENABLED 1 - -#if defined(NRF51) -#include -#elif defined(NRF52805_XXAA) -#include -#elif defined(NRF52810_XXAA) -#include -#elif defined(NRF52811_XXAA) -#include -#elif defined(NRF52820_XXAA) -#include -#elif defined(NRF52832_XXAA) || defined (NRF52832_XXAB) -#include -#elif defined(NRF52833_XXAA) -#include -#elif defined(NRF52840_XXAA) -#include -#elif defined(NRF5340_XXAA_APPLICATION) -#include -#elif defined(NRF5340_XXAA_NETWORK) - #include -#elif defined(NRF9120_XXAA) || defined(NRF9160_XXAA) - #include -#else - #error "Unknown device." -#endif - -#endif // NRFX_CONFIG_H__ diff --git a/hw/bsp/nrf/nrfx_config/nrfx_config.h b/hw/bsp/nrf/nrfx_config/nrfx_config.h new file mode 100644 index 000000000..fbec4192b --- /dev/null +++ b/hw/bsp/nrf/nrfx_config/nrfx_config.h @@ -0,0 +1,46 @@ +#ifndef NRFX_CONFIG_H__ +#define NRFX_CONFIG_H__ + +#define NRFX_POWER_ENABLED 1 +#define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 + +#define NRFX_CLOCK_ENABLED 0 +#define NRFX_GPIOTE_ENABLED 1 +#define NRFX_GPIOTE0_ENABLED 1 + +#define NRFX_UARTE_ENABLED 1 +#define NRFX_UARTE0_ENABLED 1 + +#define NRFX_SPIM_ENABLED 1 +#define NRFX_SPIM1_ENABLED 1 // use SPI1 since nrf5340 share uart with spi + +#define NRFX_PRS_ENABLED 0 +#define NRFX_USBREG_ENABLED 1 + +#if defined(NRF51) +#include +#elif defined(NRF52805_XXAA) +#include +#elif defined(NRF52810_XXAA) +#include +#elif defined(NRF52811_XXAA) +#include +#elif defined(NRF52820_XXAA) +#include +#elif defined(NRF52832_XXAA) || defined (NRF52832_XXAB) +#include +#elif defined(NRF52833_XXAA) +#include +#elif defined(NRF52840_XXAA) +#include +#elif defined(NRF5340_XXAA_APPLICATION) +#include +#elif defined(NRF5340_XXAA_NETWORK) + #include +#elif defined(NRF9120_XXAA) || defined(NRF9160_XXAA) + #include +#else + #error "Unknown device." +#endif + +#endif // NRFX_CONFIG_H__ diff --git a/hw/bsp/nrf/nrfx_config/nrfx_glue.h b/hw/bsp/nrf/nrfx_config/nrfx_glue.h new file mode 100644 index 000000000..bc3b3689b --- /dev/null +++ b/hw/bsp/nrf/nrfx_config/nrfx_glue.h @@ -0,0 +1,294 @@ +/* + * Copyright (c) 2017 - 2024, Nordic Semiconductor ASA + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef NRFX_GLUE_H__ +#define NRFX_GLUE_H__ + +// THIS IS A TEMPLATE FILE. +// It should be copied to a suitable location within the host environment into +// which nrfx is integrated, and the following macros should be provided with +// appropriate implementations. +// And this comment should be removed from the customized file. + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup nrfx_glue nrfx_glue.h + * @{ + * @ingroup nrfx + * + * @brief This file contains macros that should be implemented according to + * the needs of the host environment into which @em nrfx is integrated. + */ + +// Uncomment this line to use the standard MDK way of binding IRQ handlers +// at linking time. +#include + +//------------------------------------------------------------------------------ + +/** + * @brief Macro for placing a runtime assertion. + * + * @param expression Expression to be evaluated. + */ +#define NRFX_ASSERT(expression) + +/** + * @brief Macro for placing a compile time assertion. + * + * @param expression Expression to be evaluated. + */ +#define NRFX_STATIC_ASSERT(expression) + +//------------------------------------------------------------------------------ + +/** + * @brief Macro for setting the priority of a specific IRQ. + * + * @param irq_number IRQ number. + * @param priority Priority to be set. + */ +#define NRFX_IRQ_PRIORITY_SET(irq_number, priority) _NRFX_IRQ_PRIORITY_SET(irq_number, priority) +static inline void _NRFX_IRQ_PRIORITY_SET(IRQn_Type irq_number, + uint8_t priority) +{ + NRFX_ASSERT(INTERRUPT_PRIORITY_IS_VALID(priority)); + NVIC_SetPriority(irq_number, priority); +} + +/** + * @brief Macro for enabling a specific IRQ. + * + * @param irq_number IRQ number. + */ +#define NRFX_IRQ_ENABLE(irq_number) _NRFX_IRQ_ENABLE(irq_number) +static inline void _NRFX_IRQ_ENABLE(IRQn_Type irq_number) +{ + NVIC_ClearPendingIRQ(irq_number); + NVIC_EnableIRQ(irq_number); +} + +/** + * @brief Macro for checking if a specific IRQ is enabled. + * + * @param irq_number IRQ number. + * + * @retval true If the IRQ is enabled. + * @retval false Otherwise. + */ +#define NRFX_IRQ_IS_ENABLED(irq_number) _NRFX_IRQ_IS_ENABLED(irq_number) +static inline bool _NRFX_IRQ_IS_ENABLED(IRQn_Type irq_number) +{ + return 0 != (NVIC->ISER[irq_number / 32] & (1UL << (irq_number % 32))); +} + +/** + * @brief Macro for disabling a specific IRQ. + * + * @param irq_number IRQ number. + */ +#define NRFX_IRQ_DISABLE(irq_number) _NRFX_IRQ_DISABLE(irq_number) +static inline void _NRFX_IRQ_DISABLE(IRQn_Type irq_number) +{ + NVIC_DisableIRQ(irq_number); +} + +/** + * @brief Macro for setting a specific IRQ as pending. + * + * @param irq_number IRQ number. + */ +#define NRFX_IRQ_PENDING_SET(irq_number) _NRFX_IRQ_PENDING_SET(irq_number) +static inline void _NRFX_IRQ_PENDING_SET(IRQn_Type irq_number) +{ + NVIC_SetPendingIRQ(irq_number); +} + +/** + * @brief Macro for clearing the pending status of a specific IRQ. + * + * @param irq_number IRQ number. + */ +#define NRFX_IRQ_PENDING_CLEAR(irq_number) _NRFX_IRQ_PENDING_CLEAR(irq_number) +static inline void _NRFX_IRQ_PENDING_CLEAR(IRQn_Type irq_number) +{ + NVIC_ClearPendingIRQ(irq_number); +} + +/** + * @brief Macro for checking the pending status of a specific IRQ. + * + * @retval true If the IRQ is pending. + * @retval false Otherwise. + */ +#define NRFX_IRQ_IS_PENDING(irq_number) _NRFX_IRQ_IS_PENDING(irq_number) +static inline bool _NRFX_IRQ_IS_PENDING(IRQn_Type irq_number) +{ + return (NVIC_GetPendingIRQ(irq_number) == 1); +} + +/** @brief Macro for entering into a critical section. */ +#define NRFX_CRITICAL_SECTION_ENTER() + +/** @brief Macro for exiting from a critical section. */ +#define NRFX_CRITICAL_SECTION_EXIT() + +//------------------------------------------------------------------------------ + +/** + * @brief When set to a non-zero value, this macro specifies that + * @ref nrfx_coredep_delay_us uses a precise DWT-based solution. + * A compilation error is generated if the DWT unit is not present + * in the SoC used. + */ +#define NRFX_DELAY_DWT_BASED 0 + +/** + * @brief Macro for delaying the code execution for at least the specified time. + * + * @param us_time Number of microseconds to wait. + */ +#include +#define NRFX_DELAY_US(us_time) nrfx_coredep_delay_us(us_time) + +//------------------------------------------------------------------------------ + +/** + * @brief When set to a non-zero value, this macro specifies that the + * @ref nrfx_error_codes and the @ref nrfx_err_t type itself are defined + * in a customized way and the default definitions from @c + * should not be used. + */ +#define NRFX_CUSTOM_ERROR_CODES 0 + +//------------------------------------------------------------------------------ + +/** + * @brief Bitmask defining PPI channels reserved to be used outside of nrfx. + */ +#define NRFX_PPI_CHANNELS_USED 0 + +/** + * @brief Bitmask defining PPI groups reserved to be used outside of nrfx. + */ +#define NRFX_PPI_GROUPS_USED 0 + +/** + * @brief Bitmask defining SWI instances reserved to be used outside of nrfx. + */ +#define NRFX_SWI_USED 0 + +/** + * @brief Bitmask defining TIMER instances reserved to be used outside of nrfx. + */ +#define NRFX_TIMERS_USED 0 + +/** @} */ + +//------------------------------------------------------------------------------ + +#include + +/** + * @brief Atomic 32 bit unsigned type. + */ +#define nrfx_atomic_t nrfx_atomic_u32_t + +/** + * @brief Stores value to an atomic object and returns previously stored value. + * + * @param[in] p_data Atomic memory pointer. + * @param[in] value Value to store. + * + * @return Old value stored into atomic object. + */ +#define NRFX_ATOMIC_FETCH_STORE(p_data, value) nrfx_atomic_u32_fetch_store(p_data, value) + +/** + * @brief Performs logical OR operation on an atomic object and returns previously stored value. + * + * @param[in] p_data Atomic memory pointer. + * @param[in] value Value of second operand of OR operation. + * + * @return Old value stored into atomic object. + */ +#define NRFX_ATOMIC_FETCH_OR(p_data, value) nrfx_atomic_u32_fetch_or(p_data, value) + +/** + * @brief Performs logical AND operation on an atomic object and returns previously stored value. + * + * @param[in] p_data Atomic memory pointer. + * @param[in] value Value of second operand of AND operation. + * + * @return Old value stored into atomic object. + */ +#define NRFX_ATOMIC_FETCH_AND(p_data, value) nrfx_atomic_u32_fetch_and(p_data, value) + +/** + * @brief Performs logical XOR operation on an atomic object and returns previously stored value. + * + * @param[in] p_data Atomic memory pointer. + * @param[in] value Value of second operand of XOR operation. + * + * @return Old value stored into atomic object. + */ +#define NRFX_ATOMIC_FETCH_XOR(p_data, value) nrfx_atomic_u32_fetch_xor(p_data, value) + +/** + * @brief Performs logical ADD operation on an atomic object and returns previously stored value. + * + * @param[in] p_data Atomic memory pointer. + * @param[in] value Value of second operand of ADD operation. + * + * @return Old value stored into atomic object. + */ +#define NRFX_ATOMIC_FETCH_ADD(p_data, value) nrfx_atomic_u32_fetch_add(p_data, value) + +/** + * @brief Performs logical SUB operation on an atomic object and returns previously stored value. + * + * @param[in] p_data Atomic memory pointer. + * @param[in] value Value of second operand of SUB operation. + * + * @return Old value stored into atomic object. + */ +#define NRFX_ATOMIC_FETCH_SUB(p_data, value) nrfx_atomic_u32_fetch_sub(p_data, value) + +#ifdef __cplusplus +} +#endif + +#endif // NRFX_GLUE_H__ diff --git a/hw/bsp/nrf/nrfx_config/nrfx_log.h b/hw/bsp/nrf/nrfx_config/nrfx_log.h new file mode 100644 index 000000000..3bc1b424e --- /dev/null +++ b/hw/bsp/nrf/nrfx_config/nrfx_log.h @@ -0,0 +1,135 @@ +/* + * Copyright (c) 2017 - 2019, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of the copyright holder nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef NRFX_LOG_H__ +#define NRFX_LOG_H__ + +// THIS IS A TEMPLATE FILE. +// It should be copied to a suitable location within the host environment into +// which nrfx is integrated, and the following macros should be provided with +// appropriate implementations. +// And this comment should be removed from the customized file. + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup nrfx_log nrfx_log.h + * @{ + * @ingroup nrfx + * + * @brief This file contains macros that should be implemented according to + * the needs of the host environment into which @em nrfx is integrated. + */ + +/** + * @brief Macro for logging a message with the severity level ERROR. + * + * @param format printf-style format string, optionally followed by arguments + * to be formatted and inserted in the resulting string. + */ +#define NRFX_LOG_ERROR(format, ...) + +/** + * @brief Macro for logging a message with the severity level WARNING. + * + * @param format printf-style format string, optionally followed by arguments + * to be formatted and inserted in the resulting string. + */ +#define NRFX_LOG_WARNING(format, ...) + +/** + * @brief Macro for logging a message with the severity level INFO. + * + * @param format printf-style format string, optionally followed by arguments + * to be formatted and inserted in the resulting string. + */ +#define NRFX_LOG_INFO(format, ...) + +/** + * @brief Macro for logging a message with the severity level DEBUG. + * + * @param format printf-style format string, optionally followed by arguments + * to be formatted and inserted in the resulting string. + */ +#define NRFX_LOG_DEBUG(format, ...) + + +/** + * @brief Macro for logging a memory dump with the severity level ERROR. + * + * @param[in] p_memory Pointer to the memory region to be dumped. + * @param[in] length Length of the memory region in bytes. + */ +#define NRFX_LOG_HEXDUMP_ERROR(p_memory, length) + +/** + * @brief Macro for logging a memory dump with the severity level WARNING. + * + * @param[in] p_memory Pointer to the memory region to be dumped. + * @param[in] length Length of the memory region in bytes. + */ +#define NRFX_LOG_HEXDUMP_WARNING(p_memory, length) + +/** + * @brief Macro for logging a memory dump with the severity level INFO. + * + * @param[in] p_memory Pointer to the memory region to be dumped. + * @param[in] length Length of the memory region in bytes. + */ +#define NRFX_LOG_HEXDUMP_INFO(p_memory, length) + +/** + * @brief Macro for logging a memory dump with the severity level DEBUG. + * + * @param[in] p_memory Pointer to the memory region to be dumped. + * @param[in] length Length of the memory region in bytes. + */ +#define NRFX_LOG_HEXDUMP_DEBUG(p_memory, length) + + +/** + * @brief Macro for getting the textual representation of a given error code. + * + * @param[in] error_code Error code. + * + * @return String containing the textual representation of the error code. + */ +#define NRFX_LOG_ERROR_STRING_GET(error_code) + +/** @} */ + +#ifdef __cplusplus +} +#endif + +#endif // NRFX_LOG_H__ diff --git a/hw/bsp/nrf/nrfx_glue.h b/hw/bsp/nrf/nrfx_glue.h deleted file mode 100644 index bc3b3689b..000000000 --- a/hw/bsp/nrf/nrfx_glue.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - * Copyright (c) 2017 - 2024, Nordic Semiconductor ASA - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef NRFX_GLUE_H__ -#define NRFX_GLUE_H__ - -// THIS IS A TEMPLATE FILE. -// It should be copied to a suitable location within the host environment into -// which nrfx is integrated, and the following macros should be provided with -// appropriate implementations. -// And this comment should be removed from the customized file. - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @defgroup nrfx_glue nrfx_glue.h - * @{ - * @ingroup nrfx - * - * @brief This file contains macros that should be implemented according to - * the needs of the host environment into which @em nrfx is integrated. - */ - -// Uncomment this line to use the standard MDK way of binding IRQ handlers -// at linking time. -#include - -//------------------------------------------------------------------------------ - -/** - * @brief Macro for placing a runtime assertion. - * - * @param expression Expression to be evaluated. - */ -#define NRFX_ASSERT(expression) - -/** - * @brief Macro for placing a compile time assertion. - * - * @param expression Expression to be evaluated. - */ -#define NRFX_STATIC_ASSERT(expression) - -//------------------------------------------------------------------------------ - -/** - * @brief Macro for setting the priority of a specific IRQ. - * - * @param irq_number IRQ number. - * @param priority Priority to be set. - */ -#define NRFX_IRQ_PRIORITY_SET(irq_number, priority) _NRFX_IRQ_PRIORITY_SET(irq_number, priority) -static inline void _NRFX_IRQ_PRIORITY_SET(IRQn_Type irq_number, - uint8_t priority) -{ - NRFX_ASSERT(INTERRUPT_PRIORITY_IS_VALID(priority)); - NVIC_SetPriority(irq_number, priority); -} - -/** - * @brief Macro for enabling a specific IRQ. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_ENABLE(irq_number) _NRFX_IRQ_ENABLE(irq_number) -static inline void _NRFX_IRQ_ENABLE(IRQn_Type irq_number) -{ - NVIC_ClearPendingIRQ(irq_number); - NVIC_EnableIRQ(irq_number); -} - -/** - * @brief Macro for checking if a specific IRQ is enabled. - * - * @param irq_number IRQ number. - * - * @retval true If the IRQ is enabled. - * @retval false Otherwise. - */ -#define NRFX_IRQ_IS_ENABLED(irq_number) _NRFX_IRQ_IS_ENABLED(irq_number) -static inline bool _NRFX_IRQ_IS_ENABLED(IRQn_Type irq_number) -{ - return 0 != (NVIC->ISER[irq_number / 32] & (1UL << (irq_number % 32))); -} - -/** - * @brief Macro for disabling a specific IRQ. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_DISABLE(irq_number) _NRFX_IRQ_DISABLE(irq_number) -static inline void _NRFX_IRQ_DISABLE(IRQn_Type irq_number) -{ - NVIC_DisableIRQ(irq_number); -} - -/** - * @brief Macro for setting a specific IRQ as pending. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_PENDING_SET(irq_number) _NRFX_IRQ_PENDING_SET(irq_number) -static inline void _NRFX_IRQ_PENDING_SET(IRQn_Type irq_number) -{ - NVIC_SetPendingIRQ(irq_number); -} - -/** - * @brief Macro for clearing the pending status of a specific IRQ. - * - * @param irq_number IRQ number. - */ -#define NRFX_IRQ_PENDING_CLEAR(irq_number) _NRFX_IRQ_PENDING_CLEAR(irq_number) -static inline void _NRFX_IRQ_PENDING_CLEAR(IRQn_Type irq_number) -{ - NVIC_ClearPendingIRQ(irq_number); -} - -/** - * @brief Macro for checking the pending status of a specific IRQ. - * - * @retval true If the IRQ is pending. - * @retval false Otherwise. - */ -#define NRFX_IRQ_IS_PENDING(irq_number) _NRFX_IRQ_IS_PENDING(irq_number) -static inline bool _NRFX_IRQ_IS_PENDING(IRQn_Type irq_number) -{ - return (NVIC_GetPendingIRQ(irq_number) == 1); -} - -/** @brief Macro for entering into a critical section. */ -#define NRFX_CRITICAL_SECTION_ENTER() - -/** @brief Macro for exiting from a critical section. */ -#define NRFX_CRITICAL_SECTION_EXIT() - -//------------------------------------------------------------------------------ - -/** - * @brief When set to a non-zero value, this macro specifies that - * @ref nrfx_coredep_delay_us uses a precise DWT-based solution. - * A compilation error is generated if the DWT unit is not present - * in the SoC used. - */ -#define NRFX_DELAY_DWT_BASED 0 - -/** - * @brief Macro for delaying the code execution for at least the specified time. - * - * @param us_time Number of microseconds to wait. - */ -#include -#define NRFX_DELAY_US(us_time) nrfx_coredep_delay_us(us_time) - -//------------------------------------------------------------------------------ - -/** - * @brief When set to a non-zero value, this macro specifies that the - * @ref nrfx_error_codes and the @ref nrfx_err_t type itself are defined - * in a customized way and the default definitions from @c - * should not be used. - */ -#define NRFX_CUSTOM_ERROR_CODES 0 - -//------------------------------------------------------------------------------ - -/** - * @brief Bitmask defining PPI channels reserved to be used outside of nrfx. - */ -#define NRFX_PPI_CHANNELS_USED 0 - -/** - * @brief Bitmask defining PPI groups reserved to be used outside of nrfx. - */ -#define NRFX_PPI_GROUPS_USED 0 - -/** - * @brief Bitmask defining SWI instances reserved to be used outside of nrfx. - */ -#define NRFX_SWI_USED 0 - -/** - * @brief Bitmask defining TIMER instances reserved to be used outside of nrfx. - */ -#define NRFX_TIMERS_USED 0 - -/** @} */ - -//------------------------------------------------------------------------------ - -#include - -/** - * @brief Atomic 32 bit unsigned type. - */ -#define nrfx_atomic_t nrfx_atomic_u32_t - -/** - * @brief Stores value to an atomic object and returns previously stored value. - * - * @param[in] p_data Atomic memory pointer. - * @param[in] value Value to store. - * - * @return Old value stored into atomic object. - */ -#define NRFX_ATOMIC_FETCH_STORE(p_data, value) nrfx_atomic_u32_fetch_store(p_data, value) - -/** - * @brief Performs logical OR operation on an atomic object and returns previously stored value. - * - * @param[in] p_data Atomic memory pointer. - * @param[in] value Value of second operand of OR operation. - * - * @return Old value stored into atomic object. - */ -#define NRFX_ATOMIC_FETCH_OR(p_data, value) nrfx_atomic_u32_fetch_or(p_data, value) - -/** - * @brief Performs logical AND operation on an atomic object and returns previously stored value. - * - * @param[in] p_data Atomic memory pointer. - * @param[in] value Value of second operand of AND operation. - * - * @return Old value stored into atomic object. - */ -#define NRFX_ATOMIC_FETCH_AND(p_data, value) nrfx_atomic_u32_fetch_and(p_data, value) - -/** - * @brief Performs logical XOR operation on an atomic object and returns previously stored value. - * - * @param[in] p_data Atomic memory pointer. - * @param[in] value Value of second operand of XOR operation. - * - * @return Old value stored into atomic object. - */ -#define NRFX_ATOMIC_FETCH_XOR(p_data, value) nrfx_atomic_u32_fetch_xor(p_data, value) - -/** - * @brief Performs logical ADD operation on an atomic object and returns previously stored value. - * - * @param[in] p_data Atomic memory pointer. - * @param[in] value Value of second operand of ADD operation. - * - * @return Old value stored into atomic object. - */ -#define NRFX_ATOMIC_FETCH_ADD(p_data, value) nrfx_atomic_u32_fetch_add(p_data, value) - -/** - * @brief Performs logical SUB operation on an atomic object and returns previously stored value. - * - * @param[in] p_data Atomic memory pointer. - * @param[in] value Value of second operand of SUB operation. - * - * @return Old value stored into atomic object. - */ -#define NRFX_ATOMIC_FETCH_SUB(p_data, value) nrfx_atomic_u32_fetch_sub(p_data, value) - -#ifdef __cplusplus -} -#endif - -#endif // NRFX_GLUE_H__ diff --git a/hw/bsp/nrf/nrfx_log.h b/hw/bsp/nrf/nrfx_log.h deleted file mode 100644 index 3bc1b424e..000000000 --- a/hw/bsp/nrf/nrfx_log.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * Copyright (c) 2017 - 2019, Nordic Semiconductor ASA - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of the copyright holder nor the names of its - * contributors may be used to endorse or promote products derived from this - * software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef NRFX_LOG_H__ -#define NRFX_LOG_H__ - -// THIS IS A TEMPLATE FILE. -// It should be copied to a suitable location within the host environment into -// which nrfx is integrated, and the following macros should be provided with -// appropriate implementations. -// And this comment should be removed from the customized file. - -#ifdef __cplusplus -extern "C" { -#endif - -/** - * @defgroup nrfx_log nrfx_log.h - * @{ - * @ingroup nrfx - * - * @brief This file contains macros that should be implemented according to - * the needs of the host environment into which @em nrfx is integrated. - */ - -/** - * @brief Macro for logging a message with the severity level ERROR. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_ERROR(format, ...) - -/** - * @brief Macro for logging a message with the severity level WARNING. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_WARNING(format, ...) - -/** - * @brief Macro for logging a message with the severity level INFO. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_INFO(format, ...) - -/** - * @brief Macro for logging a message with the severity level DEBUG. - * - * @param format printf-style format string, optionally followed by arguments - * to be formatted and inserted in the resulting string. - */ -#define NRFX_LOG_DEBUG(format, ...) - - -/** - * @brief Macro for logging a memory dump with the severity level ERROR. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_ERROR(p_memory, length) - -/** - * @brief Macro for logging a memory dump with the severity level WARNING. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_WARNING(p_memory, length) - -/** - * @brief Macro for logging a memory dump with the severity level INFO. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_INFO(p_memory, length) - -/** - * @brief Macro for logging a memory dump with the severity level DEBUG. - * - * @param[in] p_memory Pointer to the memory region to be dumped. - * @param[in] length Length of the memory region in bytes. - */ -#define NRFX_LOG_HEXDUMP_DEBUG(p_memory, length) - - -/** - * @brief Macro for getting the textual representation of a given error code. - * - * @param[in] error_code Error code. - * - * @return String containing the textual representation of the error code. - */ -#define NRFX_LOG_ERROR_STRING_GET(error_code) - -/** @} */ - -#ifdef __cplusplus -} -#endif - -#endif // NRFX_LOG_H__ diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 5bfedae17..9e5f5117f 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -39,8 +39,8 @@ #endif #include "nrf.h" -#include "nrf_clock.h" -#include "nrfx_usbd_errata.h" +#include "nrfx_clock.h" +#include "nrf_erratas.h" #ifdef __GNUC__ #pragma GCC diagnostic pop @@ -926,7 +926,7 @@ void tusb_hal_nrf_power_event(uint32_t event) { #ifdef NRF52_SERIES // NRF53 does not need this errata // ERRATA 171, 187, 166 - if (nrfx_usbd_errata_187()) { + if (nrf52_errata_187()) { // CRITICAL_REGION_ENTER(); if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; @@ -938,7 +938,7 @@ void tusb_hal_nrf_power_event(uint32_t event) { // CRITICAL_REGION_EXIT(); } - if (nrfx_usbd_errata_171()) { + if (nrf52_errata_171()) { // CRITICAL_REGION_ENTER(); if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; @@ -974,7 +974,7 @@ void tusb_hal_nrf_power_event(uint32_t event) { __DSB(); // for sync #ifdef NRF52_SERIES - if (nrfx_usbd_errata_171()) { + if (nrf52_errata_171()) { // CRITICAL_REGION_ENTER(); if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; @@ -987,7 +987,7 @@ void tusb_hal_nrf_power_event(uint32_t event) { // CRITICAL_REGION_EXIT(); } - if (nrfx_usbd_errata_187()) { + if (nrf52_errata_187()) { // CRITICAL_REGION_ENTER(); if (*((volatile uint32_t*) (0x4006EC00)) == 0x00000000) { *((volatile uint32_t*) (0x4006EC00)) = 0x00009375; @@ -999,7 +999,7 @@ void tusb_hal_nrf_power_event(uint32_t event) { // CRITICAL_REGION_EXIT(); } - if (nrfx_usbd_errata_166()) { + if (nrf52_errata_166()) { *((volatile uint32_t*) (NRF_USBD_BASE + 0x800)) = 0x7E3; *((volatile uint32_t*) (NRF_USBD_BASE + 0x804)) = 0x40; -- cgit v1.3.1 From f6f20e17abc6c0131da7c82e0bfba0690f30bab2 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 24 Jan 2025 16:54:36 +0100 Subject: Add NUCLEO-H7S3L8 BSP. Signed-off-by: HiFiPhile --- docs/reference/boards.rst | 1 + hw/bsp/board_mcu.h | 3 + hw/bsp/stm32h7rs/FreeRTOSConfig/FreeRTOSConfig.h | 149 ++ .../stm32h7rs/boards/stm32h7s3nucleo/board.cmake | 17 + hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h | 262 +++ hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk | 15 + .../boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt | 6 + .../stm32h7s3nucleo/tcpp0203/Release_Notes.html | 205 +++ .../stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png | Bin 0 -> 4126 bytes .../tcpp0203/_htmresc/mini-st_2020.css | 1703 ++++++++++++++++++++ .../tcpp0203/_htmresc/st_logo_2020.png | Bin 0 -> 7520 bytes .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c | 888 ++++++++++ .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h | 355 ++++ .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c | 75 + .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h | 100 ++ hw/bsp/stm32h7rs/family.c | 313 ++++ hw/bsp/stm32h7rs/family.cmake | 150 ++ hw/bsp/stm32h7rs/family.mk | 92 ++ hw/bsp/stm32h7rs/stm32h7rsxx_hal_conf.h | 501 ++++++ src/portable/synopsys/dwc2/dwc2_info.md | 116 +- src/portable/synopsys/dwc2/dwc2_info.py | 1 + 21 files changed, 4894 insertions(+), 58 deletions(-) create mode 100644 hw/bsp/stm32h7rs/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.h create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c create mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h create mode 100644 hw/bsp/stm32h7rs/family.c create mode 100644 hw/bsp/stm32h7rs/family.cmake create mode 100644 hw/bsp/stm32h7rs/family.mk create mode 100644 hw/bsp/stm32h7rs/stm32h7rsxx_hal_conf.h (limited to 'src/portable') diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 4739467bc..2ee40cf7e 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -261,6 +261,7 @@ stm32h743nucleo STM32 H743 Nucleo stm32h7 https://www.st stm32h745disco STM32 H745 Discovery stm32h7 https://www.st.com/en/evaluation-tools/stm32h745i-disco.html stm32h750_weact STM32 H750 WeAct stm32h7 https://www.adafruit.com/product/5032 stm32h750bdk STM32 H750b Discovery Kit stm32h7 https://www.st.com/en/evaluation-tools/stm32h750b-dk.html +stm32h7s3nucleo STM32 H7S3 Nucleo stm32h7rs https://www.st.com/en/evaluation-tools/nucleo-h7s3l8.html waveshare_openh743i Waveshare Open H743i stm32h7 https://www.waveshare.com/openh743i-c-standard.htm stm32l052dap52 STM32 L052 DAP stm32l0 n/a stm32l0538disco STM32 L0538 Discovery stm32l0 https://www.st.com/en/evaluation-tools/32l0538discovery.html diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h index e720cd747..4613343d4 100644 --- a/hw/bsp/board_mcu.h +++ b/hw/bsp/board_mcu.h @@ -89,6 +89,9 @@ #elif CFG_TUSB_MCU == OPT_MCU_STM32H7 #include "stm32h7xx.h" +#elif CFG_TUSB_MCU == OPT_MCU_STM32H7RS + #include "stm32h7rsxx.h" + #elif CFG_TUSB_MCU == OPT_MCU_STM32L0 #include "stm32l0xx.h" diff --git a/hw/bsp/stm32h7rs/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7rs/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..9fd3f6c50 --- /dev/null +++ b/hw/bsp/stm32h7rs/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "stm32h7rsxx.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<port, pindef->pin_init.Pin, GPIO_PIN_SET); + + __HAL_RCC_I2C3_CLK_ENABLE(); + __HAL_RCC_I2C3_FORCE_RESET(); + __HAL_RCC_I2C3_RELEASE_RESET(); + if (HAL_I2C_Init(&i2c_handle) != HAL_OK) { + return HAL_ERROR; + } + + NVIC_SetPriority(EXTI8_IRQn, 12); + NVIC_EnableIRQ(EXTI8_IRQn); + + return 0; +} + +int32_t board_tcpp0203_deinit(void) { + return 0; +} + +int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +static inline void board_init2(void) { + TCPP0203_IO_t io_ctx; + + io_ctx.Address = TCPP0203_I2C_ADDRESS_X68; + io_ctx.Init = board_tcpp0203_init; + io_ctx.DeInit = board_tcpp0203_deinit; + io_ctx.ReadReg = i2c_readreg; + io_ctx.WriteReg = i2c_writereg; + + TU_ASSERT(TCPP0203_RegisterBusIO(&tcpp0203_obj, &io_ctx) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_Init(&tcpp0203_obj) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) state; + if (rhport == 1) { + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +void EXTI8_IRQHandler(void) { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_8); + if (tcpp0203_obj.IsInitialized) { + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk new file mode 100644 index 000000000..164452fb2 --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk @@ -0,0 +1,15 @@ +MCU_VARIANT = stm32h7s3xx +CFLAGS += -DSTM32H7S3xx + +# For flash-jlink target +JLINK_DEVICE = stm32h7s3xx + +# flash target using on-board stlink +flash: flash-stlink + +SRC_C += \ + $(BOARD_PATH)/tcpp0203/tcpp0203.c \ + $(BOARD_PATH)/tcpp0203/tcpp0203_reg.c \ + +INC += \ + $(BOARD_PATH)/tcpp0203 \ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt new file mode 100644 index 000000000..3edc4d146 --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html new file mode 100644 index 000000000..6bbba86a4 --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html @@ -0,0 +1,205 @@ + + + + + + + Release Notes for TCPP0203 Component Driver + + + + + + +
+
+
+

Release Notes for TCPP0203 Component Driver

+

Copyright © 2020 STMicroelectronics
+

+ +
+

Purpose

+

This driver provides a set of functions needed to drive TCPP0203 Type-C Port Protection component

+
+
+

Update History

+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + +
Headline
MISRA Rule-81.13 correction on TCPP0203 component driver files
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
MISRA corrections on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.8.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
License updates
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.6.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
CodeSpell correction on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.5.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
MCUAstyle correction on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.5.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+
    +
  • First official release of TCPP0203 Type-C port Protection Component drivers
    • +
+
+
+
+
+
+

For complete documentation on STM32,visit: [www.st.com/stm32]

+This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. +
+ + diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png new file mode 100644 index 000000000..06713eec4 Binary files /dev/null and b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png differ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css new file mode 100644 index 000000000..3d9e81ad3 --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css @@ -0,0 +1,1703 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} \ No newline at end of file diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png new file mode 100644 index 000000000..d6cebb5ac Binary files /dev/null and b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png differ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c new file mode 100644 index 000000000..abc86bd68 --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c @@ -0,0 +1,888 @@ +/** + ****************************************************************************** + * @file tcpp0203.c + * @author MCD Application Team + * @brief This file provides the TCPP02/03 Type-C port protection driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203.h" + +#if defined(_TRACE) +#include "usbpd_core.h" +#include "usbpd_trace.h" +#include "string.h" +#include "stdio.h" +#endif /* _TRACE */ + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TCPP0203 + * @brief This file provides a set of functions needed to drive the + * TCPP02/03 Type-C port protection. + * @{ + */ + +/** @defgroup TCPP0203_Private_Constants Private Constants + * @{ + */ + +/* Compilation option in order to enable/disable a concistency check performed + after each I2C access into TCPP0203 registers : goal is to check that written value in Reg0 + is properly reflected into reg1 register content. + To enable register consistency check, please uncomment below definition. + To disable it, comment below line */ +/* #define TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** @defgroup TCPP0203_Private_Types Private Types + * @{ + */ +/* TCPP02/03 Type-C port protection driver structure initialization */ +TCPP0203_Drv_t TCPP0203_Driver = +{ + TCPP0203_Init, + TCPP0203_DeInit, + TCPP0203_Reset, + TCPP0203_SetVConnSwitch, + TCPP0203_SetGateDriverProvider, + TCPP0203_SetGateDriverConsumer, + TCPP0203_SetPowerMode, + TCPP0203_SetVBusDischarge, + TCPP0203_SetVConnDischarge, + TCPP0203_GetVConnSwitchAck, + TCPP0203_GetGateDriverProviderAck, + TCPP0203_GetGateDriverConsumerAck, + TCPP0203_GetPowerModeAck, + TCPP0203_GetVBusDischargeAck, + TCPP0203_GetVConnDischargeAck, + TCPP0203_GetOCPVConnFlag, + TCPP0203_GetOCPVBusFlag, + TCPP0203_GetOVPVBusFlag, + TCPP0203_GetOVPCCFlag, + TCPP0203_GetOTPFlag, + TCPP0203_GetVBusOkFlag, + TCPP0203_ReadTCPPType, + TCPP0203_ReadVCONNPower, + TCPP0203_WriteCtrlRegister, + TCPP0203_ReadAckRegister, + TCPP0203_ReadFlagRegister, +}; + +/** + * @} + */ + +/** @defgroup TCPP0203_Private_Variables Private Variables + * @{ + */ +static uint8_t TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_03; + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +static uint8_t Reg0_Expected_Value = 0x00; +static uint8_t Reg1_LastRead_Value = 0x00; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup TCPP0203_Private_Function_Prototypes TCPP0203 Private Function Prototypes + * @{ + */ +static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); +static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); + +static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue); +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions + * @{ + */ + +/** + * @brief Register Bus Io to component + * @param Component object pointer + * @retval Status of execution + */ +int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO) +{ + int32_t ret; + + if (pObj == NULL) + { + ret = TCPP0203_ERROR; + } + else + { + pObj->IO.Init = pIO->Init; + pObj->IO.DeInit = pIO->DeInit; + pObj->IO.Address = pIO->Address; + pObj->IO.WriteReg = pIO->WriteReg; + pObj->IO.ReadReg = pIO->ReadReg; + pObj->IO.GetTick = pIO->GetTick; + + pObj->Ctx.ReadReg = TCPP0203_ReadRegWrap; + pObj->Ctx.WriteReg = TCPP0203_WriteRegWrap; + pObj->Ctx.handle = pObj; + + if (pObj->IO.Init != NULL) + { + ret = pObj->IO.Init(); + } + else + { + ret = TCPP0203_ERROR; + } + } + + return ret; +} + +/** + * @brief Initializes the TCPP0203 interface + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_Init(TCPP0203_Object_t *pObj) +{ + int32_t ret = 0; + uint8_t tmp; + + if (pObj->IsInitialized == 0U) + { + /* Read TCPP Device type */ + ret += tcpp0203_read_reg(&pObj->Ctx, TCPP0203_READ_REG2, &tmp, 1); + + if (ret == TCPP0203_OK) + { + TCPP0203_DeviceType = (tmp & TCPP0203_DEVICE_TYPE_MSK); + } + else + { + TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_02; + } + pObj->IsInitialized = 1U; + } + + if (ret != TCPP0203_OK) + { + ret = TCPP0203_ERROR; + } + + return ret; +} + +/** + * @brief Deinitializes the TCPP0203 interface + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj) +{ + if (pObj->IsInitialized == 1U) + { + /* De-Initialize IO BUS layer */ + pObj->IO.DeInit(); + + pObj->IsInitialized = 0U; + } + + return TCPP0203_OK; +} + +/** + * @brief Resets TCPP0203 register (Reg0) + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj) +{ + int32_t ret = TCPP0203_OK; + uint8_t tmp = TCPP0203_REG0_RST_VALUE; + + /* Write reset values in Reg0 register */ + if (tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1) != TCPP0203_OK) + { + ret = TCPP0203_ERROR; + } + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = TCPP0203_REG0_RST_VALUE; + Reg1_LastRead_Value = TCPP0203_REG0_RST_VALUE; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +/** + * @brief Configure TCPP0203 VConn Switch + * @param pObj Pointer to component object + * @param VConnSwitch VConn Switch requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open + * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 + * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 + * @retval Component status + */ +int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch) +{ + int32_t ret = TCPP0203_OK; + + if ((VConnSwitch != TCPP0203_VCONN_SWITCH_OPEN) + && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC1) + && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC2)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VConn switch setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VConnSwitch, TCPP0203_VCONN_SWITCH_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param GateDriverProvider GDP switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_GD_PROVIDER_SWITCH_OPEN GDP Switch Load Open + * @arg TCPP0203_GD_PROVIDER_SWITCH_CLOSED GDP Switch Load closed + * @retval Component status + */ +int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider) +{ + int32_t ret = TCPP0203_OK; + + if ((GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_OPEN) + && (GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_CLOSED)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update GDP Switch Load setting in Writing register Reg0 */ + if (GateDriverProvider == TCPP0203_GD_PROVIDER_SWITCH_CLOSED) + { + /* If Gate Driver Provider is to be closed, Gate Driver Consumer should be open */ + ret += TCPP0203_ModifyReg0(pObj, (GateDriverProvider | TCPP0203_GD_CONSUMER_SWITCH_OPEN), + (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); + } + else + { + ret += TCPP0203_ModifyReg0(pObj, GateDriverProvider, TCPP0203_GD_PROVIDER_SWITCH_MSK); + } + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Consumer path + * @param pObj Pointer to component object + * @param GateDriverConsumer GDC switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_GD_CONSUMER_SWITCH_OPEN GDC Switch Load Open + * @arg TCPP0203_GD_CONSUMER_SWITCH_CLOSED GDC Switch Load closed + * @retval Component status + */ +int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer) +{ + int32_t ret = TCPP0203_OK; + + /* Check if TCPP type is TCPP03. Otherwise, return error */ + if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) + { + return (TCPP0203_ERROR); + } + + if ((GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_OPEN) + && (GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_CLOSED)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update GDC Switch Load setting in Writing register Reg0 */ + if (GateDriverConsumer == TCPP0203_GD_CONSUMER_SWITCH_CLOSED) + { + /* If Gate Driver Consumer is to be closed, Gate Driver Provider should be open */ + ret += TCPP0203_ModifyReg0(pObj, (GateDriverConsumer | TCPP0203_GD_PROVIDER_SWITCH_OPEN), + (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); + } + else + { + ret += TCPP0203_ModifyReg0(pObj, GateDriverConsumer, TCPP0203_GD_CONSUMER_SWITCH_MSK); + } + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Power Mode + * @param pObj Pointer to component object + * @param PowerMode Power mode requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_POWER_MODE_HIBERNATE Hibernate + * @arg TCPP0203_POWER_MODE_LOWPOWER Low Power + * @arg TCPP0203_POWER_MODE_NORMAL Normal + * @retval Component status + */ +int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode) +{ + int32_t ret = TCPP0203_OK; + + if ((PowerMode != TCPP0203_POWER_MODE_HIBERNATE) + && (PowerMode != TCPP0203_POWER_MODE_LOWPOWER) + && (PowerMode != TCPP0203_POWER_MODE_NORMAL)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update Power Mode setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, PowerMode, TCPP0203_POWER_MODE_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param VBusDischarge VBUS Discharge requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VBUS_DISCHARGE_OFF VBUS Discharge Off + * @arg TCPP0203_VBUS_DISCHARGE_ON VBUS Discharge On + * @retval Component status + */ +int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge) +{ + int32_t ret = TCPP0203_OK; + + if ((VBusDischarge != TCPP0203_VBUS_DISCHARGE_OFF) + && (VBusDischarge != TCPP0203_VBUS_DISCHARGE_ON)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VBUS Discharge setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VBusDischarge, TCPP0203_VBUS_DISCHARGE_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param VConnDischarge GDP switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VCONN_DISCHARGE_OFF VConn Discharge Off + * @arg TCPP0203_VCONN_DISCHARGE_ON VConn Discharge On + * @retval Component status + */ +int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge) +{ + int32_t ret = TCPP0203_OK; + + if ((VConnDischarge != TCPP0203_VCONN_DISCHARGE_OFF) + && (VConnDischarge != TCPP0203_VCONN_DISCHARGE_ON)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VConn Discharge setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VConnDischarge, TCPP0203_VCONN_DISCHARGE_MSK); + } + + return ret; +} + +/** + * @brief Get VConn switch Ack value + * @param pObj Pointer to component object + * @param pVConnSwitchAck Pointer on VConn switch Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open Ack + * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 Ack + * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 Ack + * @retval Component status + */ +int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVConnSwitchAck = (tmp & TCPP0203_VCONN_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Gate Driver Provider Ack value + * @param pObj Pointer to component object + * @param pGateDriverProviderAck Pointer on Gate Driver Provider Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN Gate Driver Provider Open Ack + * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED Gate Driver Provider Closed Ack + * @retval Component status + */ +int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pGateDriverProviderAck = (tmp & TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Gate Driver Consumer Ack value + * @param pObj Pointer to component object + * @param pGateDriverConsumerAck Pointer on Gate Driver Consumer Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN Gate Driver Consumer Open Ack + * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED Gate Driver Consumer Closed Ack + * @retval Component status + */ +int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck) +{ + int32_t ret; + uint8_t tmp; + + /* Check if TCPP type is TCPP03. Otherwise, return error */ + if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) + { + return (TCPP0203_ERROR); + } + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pGateDriverConsumerAck = (tmp & TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Power Mode Ack value + * @param pObj Pointer to component object + * @param pPowerModeAck Pointer on Power Mode Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_POWER_MODE_ACK_HIBERNATE Power Mode Hibernate Ack + * @arg TCPP0203_POWER_MODE_ACK_LOWPOWER Power Mode Low Power Ack + * @arg TCPP0203_POWER_MODE_ACK_NORMAL Power Mode Normal Ack + * @retval Component status + */ +int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pPowerModeAck = (tmp & TCPP0203_POWER_MODE_ACK_MSK); + + return ret; +} + +/** + * @brief Get VBUS Discharge Ack value + * @param pObj Pointer to component object + * @param pVBusDischargeAck Pointer on VBUS Discharge Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VBUS_DISCHARGE_ACK_OFF VBUS Discharge Off Ack + * @arg TCPP0203_VBUS_DISCHARGE_ACK_ON VBUS Discharge On Ack + * @retval Component status + */ +int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVBusDischargeAck = (tmp & TCPP0203_VBUS_DISCHARGE_ACK_MSK); + + return ret; +} + +/** + * @brief Get VConn Discharge Ack value + * @param pObj Pointer to component object + * @param pVConnDischargeAck Pointer on VConn Discharge Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VCONN_DISCHARGE_ACK_OFF VConn Discharge Off Ack + * @arg TCPP0203_VCONN_DISCHARGE_ACK_ON VConn Discharge On Ack + * @retval Component status + */ +int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVConnDischargeAck = (tmp & TCPP0203_VCONN_DISCHARGE_ACK_MSK); + + return ret; +} + +/** + * @brief Get OCP VConn Flag value + * @param pObj Pointer to component object + * @param pOCPVConnFlag Pointer on OCP VConn Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OCP_VCONN_RESET OCP VConn flag not set + * @arg TCPP0203_FLAG_OCP_VCONN_SET OCP VConn flag set + * @retval Component status + */ +int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOCPVConnFlag = (tmp & TCPP0203_FLAG_OCP_VCONN_MSK); + + return ret; +} + +/** + * @brief Get OCP VBUS Flag value + * @param pObj Pointer to component object + * @param pGetOCPVBusFlag Pointer on OCP VBUS Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OCP_VBUS_RESET OCP VBUS flag not set + * @arg TCPP0203_FLAG_OCP_VBUS_SET OCP VBUS flag set + * @retval Component status + */ +int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pGetOCPVBusFlag = (tmp & TCPP0203_FLAG_OCP_VBUS_MSK); + + return ret; +} + +/** + * @brief Get OVP VBUS Flag value + * @param pObj Pointer to component object + * @param pOVPVBusFlag Pointer on OVP VBUS Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OVP_VBUS_RESET OVP VBUS flag not set + * @arg TCPP0203_FLAG_OVP_VBUS_SET OVP VBUS flag set + * @retval Component status + */ +int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOVPVBusFlag = (tmp & TCPP0203_FLAG_OVP_VBUS_MSK); + + return ret; +} + +/** + * @brief Get OVP CC Flag value + * @param pObj Pointer to component object + * @param pOVPCCFlag Pointer on OVP CC Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OVP_CC_RESET OVP CC flag not set + * @arg TCPP0203_FLAG_OVP_CC_SET OVP CC flag set + * @retval Component status + */ +int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOVPCCFlag = (tmp & TCPP0203_FLAG_OVP_CC_MSK); + + return ret; +} + +/** + * @brief Get Over Temperature Flag value + * @param pObj Pointer to component object + * @param pOTPFlag Pointer on Over Temperature Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OTP_RESET Over Temperature flag not set + * @arg TCPP0203_FLAG_OTP_SET Over Temperature flag set + * @retval Component status + */ +int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOTPFlag = (tmp & TCPP0203_FLAG_OTP_MSK); + + return ret; +} + +/** + * @brief Get VBUS OK Flag value + * @param pObj Pointer to component object + * @param pVBusOkFlag Pointer on VBUS OK Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_VBUS_OK_RESET VBUS OK flag not set + * @arg TCPP0203_FLAG_VBUS_OK_SET VBUS OK flag set + * @retval Component status + */ +int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pVBusOkFlag = (tmp & TCPP0203_FLAG_VBUS_OK_MSK); + + return ret; +} + +/** + * @brief Get TCPP0203 Device Type value + * @param pObj Pointer to component object + * @param pTCPPType Pointer on TCPP0203 Device Type value + * This output parameter can be one of the following values: + * @arg TCPP0203_DEVICE_TYPE_02 TCPP02 Type + * @arg TCPP0203_DEVICE_TYPE_03 TCPP03 Type + * @retval Component status + */ +int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pTCPPType = (tmp & TCPP0203_DEVICE_TYPE_MSK); + + return ret; +} + +/** + * @brief Get VConn Power value + * @param pObj Pointer to component object + * @param pVCONNPower Pointer on VConn Power value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_VCONN_PWR_1W OCP VConn flag not set + * @arg TCPP0203_FLAG_VCONN_PWR_0_1W OCP VConn flag set + * @retval Component status + */ +int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pVCONNPower = (tmp & TCPP0203_FLAG_VCONN_PWR_MSK); + + return ret; +} + +/** + * @brief Set complete Ctrl register value (Reg 0) + * @param pObj Pointer to component object + * @param pCtrlRegister Pointer on Ctrl register value + * @retval Component status + */ +int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister) +{ + int32_t ret; + + /* Update value in writing register (reg0) */ + ret = tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, pCtrlRegister, 1); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = *pCtrlRegister; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +/** + * @brief Get complete Ack register value + * @param pObj Pointer to component object + * @param pAckRegister Pointer on Ack register value + * @retval Component status + */ +int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister) +{ + int32_t ret; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, pAckRegister, 1); + + return ret; +} + +/** + * @brief Get complete Flag register value + * @param pObj Pointer to component object + * @param pFlagRegister Pointer on Flag register value + * @retval Component status + */ +int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister) +{ + int32_t ret; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, pFlagRegister, 1); + + return ret; +} + +/******************** Static functions ****************************************/ +/** + * @brief Wrap TCPP0203 read function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to read + * @param pData Buffer where Target register value should be stored + * @param Length buffer size to be read + * @retval error status + */ +static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) +{ + const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; + + return pObj->IO.ReadReg(pObj->IO.Address, Reg, pData, Length); +} + +/** + * @brief Wrap TCPP0203 write function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to write + * @param pData Target register value to be written + * @param Length Buffer size to be written + * @retval error status + */ +static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) +{ + const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = *pData; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return pObj->IO.WriteReg(pObj->IO.Address, Reg, pData, Length); +} + +/** + * @brief TCPP0203 register update function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to write + * @param pData Target register value to be written + * @param Length Buffer size to be written + * @retval error status + */ +static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask) +{ + int32_t ret; + uint8_t tmp; + + /* Read current content of ACK register (reflects content of bits set to 1 in Writing register Reg0) */ + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + + /* Update only the area dedicated to Mask */ + tmp &= ~(Mask); + tmp |= (Value & Mask); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = tmp; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + /* Update value in writing register (reg0) */ + ret += tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + ret += TCPP0203_CheckReg0Reg1(pObj, Reg0_Expected_Value); +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +/** + * @brief TCPP0203 register control function between Reg0 and Reg1 value + * @param handle Component object handle + * @param Reg0ExpectedValue Value expected in Reg0 (built after all calls to write functions) + * @retval error status + */ +static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue) +{ + int32_t ret; + + /* Read current content of ACK register (expected to reflect content of bits set to 1 in Writing register Reg0) */ + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &Reg1_LastRead_Value, 1); + +#ifdef _TRACE + char str[12]; + sprintf(str, "Exp0_0x%02x", Reg0ExpectedValue); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); + sprintf(str, "Reg1_0x%02x", Reg1_LastRead_Value); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); +#endif /* _TRACE */ + + /* Control if Reg1 value is same as Reg0 expected one */ + if (Reg1_LastRead_Value != Reg0ExpectedValue) + { + while (1); + } + + return ret; +} +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h new file mode 100644 index 000000000..f2933f758 --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h @@ -0,0 +1,355 @@ +/** + ****************************************************************************** + * @file tcpp0203.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * tcpp0203.c driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef TCPP0203_H +#define TCPP0203_H + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203_reg.h" +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Component + * @{ + */ + +/** @addtogroup TCPP0203 + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup TCPP0203_Exported_Types TCPP0203 Exported Types + * @{ + */ +typedef int32_t (*TCPP0203_Init_Func)(void); +typedef int32_t (*TCPP0203_DeInit_Func)(void); +typedef int32_t (*TCPP0203_GetTick_Func)(void); +typedef int32_t (*TCPP0203_WriteReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); +typedef int32_t (*TCPP0203_ReadReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); + +typedef struct +{ + TCPP0203_Init_Func Init; + TCPP0203_DeInit_Func DeInit; + uint16_t Address; + TCPP0203_WriteReg_Func WriteReg; + TCPP0203_ReadReg_Func ReadReg; + TCPP0203_GetTick_Func GetTick; +} TCPP0203_IO_t; + + +typedef struct +{ + TCPP0203_IO_t IO; + TCPP0203_ctx_t Ctx; + uint8_t IsInitialized; +} TCPP0203_Object_t; + +typedef struct +{ + int32_t (*Init)(TCPP0203_Object_t *); + int32_t (*DeInit)(TCPP0203_Object_t *); + int32_t (*Reset)(TCPP0203_Object_t *); + int32_t (*SetVConnSwitch)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetGateDriverProvider)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetGateDriverConsumer)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetPowerMode)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetVBusDischarge)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetVConnDischarge)(TCPP0203_Object_t *, uint8_t); + int32_t (*GetVConnSwitchAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetGateDriverProviderAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetGateDriverConsumerAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetPowerModeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVBusDischargeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVConnDischargeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOCPVConnFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOCPVBusFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOVPVBusFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOVPCCFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOTPFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVBusOkFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadTCPPType)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadVCONNPower)(TCPP0203_Object_t *, uint8_t *); + int32_t (*WriteCtrlRegister)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadAckRegister)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadFlagRegister)(TCPP0203_Object_t *, uint8_t *); +} TCPP0203_Drv_t; + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants + * @{ + */ +/** + * @brief TCPP0203 Driver Response codes + */ +#define TCPP0203_OK (0) +#define TCPP0203_ERROR (-1) + +/** + * @brief TCPP0203 possible I2C Addresses + */ +#define TCPP0203_I2C_ADDRESS_X68 (0x68U) +#define TCPP0203_I2C_ADDRESS_X6A (0x6AU) + +/** + * @brief TCPP0203 Reg0 Reset Value + */ +#define TCPP0203_REG0_RST_VALUE TCPP0203_GD_CONSUMER_SWITCH_CLOSED + +/** + * @brief TCPP0203 VCONN Switch + */ +#define TCPP0203_VCONN_SWITCH_POS (0U) +#define TCPP0203_VCONN_SWITCH_MSK (0x03U << TCPP0203_VCONN_SWITCH_POS) +#define TCPP0203_VCONN_SWITCH_OPEN (0x00U) +#define TCPP0203_VCONN_SWITCH_CC1 (0x01U << TCPP0203_VCONN_SWITCH_POS) +#define TCPP0203_VCONN_SWITCH_CC2 (0x02U << TCPP0203_VCONN_SWITCH_POS) + +/** + * @brief TCPP0203 Gate Driver Provider values + */ +#define TCPP0203_GD_PROVIDER_SWITCH_POS (2U) +#define TCPP0203_GD_PROVIDER_SWITCH_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_POS) +#define TCPP0203_GD_PROVIDER_SWITCH_OPEN (0x00U) +#define TCPP0203_GD_PROVIDER_SWITCH_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_MSK) + +/** + * @brief TCPP0203 Gate Driver Consumer values + */ +#define TCPP0203_GD_CONSUMER_SWITCH_POS (3U) +#define TCPP0203_GD_CONSUMER_SWITCH_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_POS) +#define TCPP0203_GD_CONSUMER_SWITCH_CLOSED (0x00U) +#define TCPP0203_GD_CONSUMER_SWITCH_OPEN (TCPP0203_GD_CONSUMER_SWITCH_MSK) + +/** + * @brief TCPP0203 Power Mode values + */ +#define TCPP0203_POWER_MODE_POS (4U) +#define TCPP0203_POWER_MODE_MSK (0x03U << TCPP0203_POWER_MODE_POS) +#define TCPP0203_POWER_MODE_HIBERNATE (0x00U) +#define TCPP0203_POWER_MODE_LOWPOWER (0x02U << TCPP0203_POWER_MODE_POS) +#define TCPP0203_POWER_MODE_NORMAL (0x01U << TCPP0203_POWER_MODE_POS) + +/** + * @brief TCPP0203 VBUS Discharge management + */ +#define TCPP0203_VBUS_DISCHARGE_POS (6U) +#define TCPP0203_VBUS_DISCHARGE_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_POS) +#define TCPP0203_VBUS_DISCHARGE_OFF (0x00U) +#define TCPP0203_VBUS_DISCHARGE_ON (TCPP0203_VBUS_DISCHARGE_MSK) + +/** + * @brief TCPP0203 VConn Discharge management + */ +#define TCPP0203_VCONN_DISCHARGE_POS (7U) +#define TCPP0203_VCONN_DISCHARGE_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_POS) +#define TCPP0203_VCONN_DISCHARGE_OFF (0x00U) +#define TCPP0203_VCONN_DISCHARGE_ON (TCPP0203_VCONN_DISCHARGE_MSK) + +/** + * @brief TCPP0203 VCONN Switch Acknowledge + */ +#define TCPP0203_VCONN_SWITCH_ACK_POS (0U) +#define TCPP0203_VCONN_SWITCH_ACK_MSK (0x03U << TCPP0203_VCONN_SWITCH_ACK_POS) +#define TCPP0203_VCONN_SWITCH_ACK_OPEN (0x00U) +#define TCPP0203_VCONN_SWITCH_ACK_CC1 (0x02U << TCPP0203_VCONN_SWITCH_ACK_POS) +#define TCPP0203_VCONN_SWITCH_ACK_CC2 (0x01U << TCPP0203_VCONN_SWITCH_ACK_POS) + +/** + * @brief TCPP0203 Gate Driver Provider Acknowledge + */ +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_POS (2U) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_ACK_POS) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN (0x00U) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK) + +/** + * @brief TCPP0203 Gate Driver Consumer Acknowledge + */ +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_POS (3U) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_ACK_POS) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED (0x00U) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN (TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK) + +/** + * @brief TCPP0203 Power Mode Acknowledge + */ +#define TCPP0203_POWER_MODE_ACK_POS (4U) +#define TCPP0203_POWER_MODE_ACK_MSK (0x03U << TCPP0203_POWER_MODE_ACK_POS) +#define TCPP0203_POWER_MODE_ACK_HIBERNATE (0x00U) +#define TCPP0203_POWER_MODE_ACK_LOWPOWER (0x01U << TCPP0203_POWER_MODE_ACK_POS) +#define TCPP0203_POWER_MODE_ACK_NORMAL (0x02U << TCPP0203_POWER_MODE_ACK_POS) + +/** + * @brief TCPP0203 VBUS Discharge Acknowledge + */ +#define TCPP0203_VBUS_DISCHARGE_ACK_POS (6U) +#define TCPP0203_VBUS_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_ACK_POS) +#define TCPP0203_VBUS_DISCHARGE_ACK_OFF (0x00U) +#define TCPP0203_VBUS_DISCHARGE_ACK_ON (TCPP0203_VBUS_DISCHARGE_ACK_MSK) + +/** + * @brief TCPP0203 VConn Discharge Acknowledge + */ +#define TCPP0203_VCONN_DISCHARGE_ACK_POS (7U) +#define TCPP0203_VCONN_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_ACK_POS) +#define TCPP0203_VCONN_DISCHARGE_ACK_OFF (0x00U) +#define TCPP0203_VCONN_DISCHARGE_ACK_ON (TCPP0203_VCONN_DISCHARGE_ACK_MSK) + +/** + * @brief TCPP0203 OCP Vconn Flag management + */ +#define TCPP0203_FLAG_OCP_VCONN_POS (0U) +#define TCPP0203_FLAG_OCP_VCONN_MSK (0x01U << TCPP0203_FLAG_OCP_VCONN_POS) +#define TCPP0203_FLAG_OCP_VCONN_SET (TCPP0203_FLAG_OCP_VCONN_MSK) +#define TCPP0203_FLAG_OCP_VCONN_RESET (0x00U) + +/** + * @brief TCPP0203 OCP VBUS Flag management + */ +#define TCPP0203_FLAG_OCP_VBUS_POS (1U) +#define TCPP0203_FLAG_OCP_VBUS_MSK (0x01U << TCPP0203_FLAG_OCP_VBUS_POS) +#define TCPP0203_FLAG_OCP_VBUS_SET (TCPP0203_FLAG_OCP_VBUS_MSK) +#define TCPP0203_FLAG_OCP_VBUS_RESET (0x00U) + +/** + * @brief TCPP0203 OVP VBUS Flag management + */ +#define TCPP0203_FLAG_OVP_VBUS_POS (2U) +#define TCPP0203_FLAG_OVP_VBUS_MSK (0x01U << TCPP0203_FLAG_OVP_VBUS_POS) +#define TCPP0203_FLAG_OVP_VBUS_SET (TCPP0203_FLAG_OVP_VBUS_MSK) +#define TCPP0203_FLAG_OVP_VBUS_RESET (0x00U) + +/** + * @brief TCPP0203 OVP CC Flag management + */ +#define TCPP0203_FLAG_OVP_CC_POS (3U) +#define TCPP0203_FLAG_OVP_CC_MSK (0x01U << TCPP0203_FLAG_OVP_CC_POS) +#define TCPP0203_FLAG_OVP_CC_SET (TCPP0203_FLAG_OVP_CC_MSK) +#define TCPP0203_FLAG_OVP_CC_RESET (0x00U) + +/** + * @brief TCPP0203 OTP Flag management + */ +#define TCPP0203_FLAG_OTP_POS (4U) +#define TCPP0203_FLAG_OTP_MSK (0x01U << TCPP0203_FLAG_OTP_POS) +#define TCPP0203_FLAG_OTP_SET (TCPP0203_FLAG_OTP_MSK) +#define TCPP0203_FLAG_OTP_RESET (0x00U) + +/** + * @brief TCPP0203 VBUS OK Flag management + */ +#define TCPP0203_FLAG_VBUS_OK_POS (5U) +#define TCPP0203_FLAG_VBUS_OK_MSK (0x01U << TCPP0203_FLAG_VBUS_OK_POS) +#define TCPP0203_FLAG_VBUS_OK_SET (TCPP0203_FLAG_VBUS_OK_MSK) +#define TCPP0203_FLAG_VBUS_OK_RESET (0x00U) + +/** + * @brief TCPP0203 VConn Power + */ +#define TCPP0203_FLAG_VCONN_PWR_POS (6U) +#define TCPP0203_FLAG_VCONN_PWR_MSK (0x01U << TCPP0203_FLAG_VCONN_PWR_POS) +#define TCPP0203_FLAG_VCONN_PWR_1W (TCPP0203_FLAG_VCONN_PWR_MSK) +#define TCPP0203_FLAG_VCONN_PWR_0_1W (0x00U) + +/** + * @brief TCPP0203 Device Type + */ +#define TCPP0203_DEVICE_TYPE_POS (7U) +#define TCPP0203_DEVICE_TYPE_MSK (0x01U << TCPP0203_DEVICE_TYPE_POS) +#define TCPP0203_DEVICE_TYPE_02 (TCPP0203_DEVICE_TYPE_MSK) +#define TCPP0203_DEVICE_TYPE_03 (0x00U) + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Macros TCPP0203 Exported Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions + * @{ + */ + +/*------------------------------------------------------------------------------ + TCPP02/03 Type-C port protection functions +------------------------------------------------------------------------------*/ +/* High Layer codec functions */ +int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO); +int32_t TCPP0203_Init(TCPP0203_Object_t *pObj); +int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj); +int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj); +int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch); +int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider); +int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer); +int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode); +int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge); +int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge); +int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck); +int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck); +int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck); +int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck); +int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck); +int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck); +int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag); +int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag); +int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag); +int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag); +int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag); +int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag); +int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType); +int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower); +int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister); +int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister); +int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister); + +/** + * @} + */ + +/* TCPP02/03 Type-C port protection driver structure */ +extern TCPP0203_Drv_t TCPP0203_Driver; + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TCPP0203_H */ + + diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c new file mode 100644 index 000000000..5194172db --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c @@ -0,0 +1,75 @@ +/** + ****************************************************************************** + * @file tcpp0203_reg.c + * @author MCD Application Team + * @brief This file provides unitary register function to control the TCPP02-03 + * Type-C port protection driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203_reg.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TCPP0203 + * @brief This file provides a set of functions needed to drive the + * TCPP02/03 Type-C port protection codec. + * @{ + */ + +/************** Generic Function *******************/ +/******************************************************************************* + * Function Name : tcpp0203_read_reg + * Description : Generic Reading function. It must be fulfilled with either + * I2C or SPI reading functions + * Input : Register Address, length of buffer + * Output : data Read + *******************************************************************************/ +int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) +{ + return ctx->ReadReg(ctx->handle, reg, data, length); +} + +/******************************************************************************* + * Function Name : tcpp0203_write_reg + * Description : Generic Writing function. It must be fulfilled with either + * I2C or SPI writing function + * Input : Register Address, data to be written, length of buffer + * Output : None + *******************************************************************************/ +int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) +{ + return ctx->WriteReg(ctx->handle, reg, data, length); +} + +/******************************************************************************/ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h new file mode 100644 index 000000000..29edc62db --- /dev/null +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h @@ -0,0 +1,100 @@ +/** + ****************************************************************************** + * @file tcpp0203_reg.h + * @author MCD Application Team + * @brief Header of tcpp0203_reg.c + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef TCPP0203_REG_H +#define TCPP0203_REG_H + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Component + * @{ + */ + +/** @addtogroup TCPP0203 + * @{ + */ + + +/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants + * @{ + */ +/******************************************************************************/ +/****************************** REGISTER MAPPING ******************************/ +/******************************************************************************/ +#define TCPP0203_WRITE_REG 0x00U +#define TCPP0203_PROG_CTRL TCPP0203_WRITE_REG +#define TCPP0203_READ_REG1 0x01U +#define TCPP0203_ACK_REG TCPP0203_READ_REG1 +#define TCPP0203_READ_REG2 0x02U +#define TCPP0203_FLAG_REG TCPP0203_READ_REG2 + +/** + * @} + */ + +/************** Generic Function *******************/ + +typedef int32_t (*TCPP0203_Write_Func)(const void *, uint8_t, uint8_t *, uint8_t); +typedef int32_t (*TCPP0203_Read_Func)(const void *, uint8_t, uint8_t *, uint8_t); + +typedef struct +{ + TCPP0203_Write_Func WriteReg; + TCPP0203_Read_Func ReadReg; + void *handle; +} TCPP0203_ctx_t; + +/******************************************************************************* + * Register : Generic - All + * Address : Generic - All + * Bit Group Name: None + * Permission : W + *******************************************************************************/ +int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); +int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); + +#ifdef __cplusplus +} +#endif + +#endif /* TCPP0203_REG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + + diff --git a/hw/bsp/stm32h7rs/family.c b/hw/bsp/stm32h7rs/family.c new file mode 100644 index 000000000..1fbbd3cdb --- /dev/null +++ b/hw/bsp/stm32h7rs/family.c @@ -0,0 +1,313 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 + * William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: STMicroelectronics +*/ + +#include "stm32h7rsxx_hal.h" +#include "bsp/board_api.h" + +TU_ATTR_UNUSED static void Error_Handler(void) { } + +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; + +#include "board.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Despite being call USB2_OTG_FS on some MCUs +// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port +void OTG_FS_IRQHandler(void) { + tusb_int_handler(0, true); +} + +// Despite being call USB1_OTG_HS on some MCUs +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void OTG_HS_IRQHandler(void) { + tusb_int_handler(1, true); +} + +#ifdef TRACE_ETM +void trace_etm_init(void) { + // H7 trace pin is PE2 to PE6 + GPIO_InitTypeDef gpio_init; + gpio_init.Pin = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6; + gpio_init.Mode = GPIO_MODE_AF_PP; + gpio_init.Pull = GPIO_PULLUP; + gpio_init.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + gpio_init.Alternate = GPIO_AF0_TRACE; + HAL_GPIO_Init(GPIOE, &gpio_init); + + // Enable trace clk, also in D1 and D3 domain + DBGMCU->CR |= DBGMCU_CR_DBG_TRACECKEN | DBGMCU_CR_DBG_CKD1EN | DBGMCU_CR_DBG_CKD3EN; +} +#else + #define trace_etm_init() +#endif + +void board_init(void) { + HAL_Init(); + + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + // Implemented in board.h + SystemClock_Config(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOM_CLK_ENABLE(); + __HAL_RCC_GPION_CLK_ENABLE(); + __HAL_RCC_GPIOO_CLK_ENABLE(); + __HAL_RCC_GPIOP_CLK_ENABLE(); + + trace_etm_init(); + + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // Explicitly disable systick to prevent its ISR runs before scheduler start + SysTick->CTRL &= ~1U; + + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + #ifdef USB_OTG_FS_PERIPH_BASE + NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + #endif + + NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + + +#ifdef UART_DEV + UART_CLK_EN(); + HAL_UART_Init(&UartHandle); +#endif + + //------------- USB FS -------------// +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 0) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 0) + // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port + + HAL_PWREx_EnableUSBVoltageDetector(); + HAL_PWREx_EnableUSBReg(); + + __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); + + // PM14 VUSB, PM10 ID, PM11 DM, PM12 DP + // Configure DM DP Pins + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); + + // This for ID line debug + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); + +#if OTG_FS_VBUS_SENSE + // Configure VBUS Pin + GPIO_InitStruct.Pin = GPIO_PIN_14; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); + + // Enable VBUS sense (B device) via pin PM14 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#else + // Disable VBUS sense (B device) + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif // vbus sense +#endif + + //------------- USB HS -------------// +#if (CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1) || (CFG_TUH_ENABLED && BOARD_TUH_RHPORT == 1) + + // Enable USB HS & ULPI Clocks + __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); + __HAL_RCC_USBPHYC_CLK_ENABLE(); + + // Enable USB power + HAL_PWREx_EnableUSBVoltageDetector(); + HAL_PWREx_EnableUSBHSregulator(); + +#if OTG_HS_VBUS_SENSE + // Configure VBUS Pin + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS; + HAL_GPIO_Init(GPIOM, &GPIO_InitStruct); + + // Enable VBUS sense (B device) via pin PM9 + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#else + // Disable VBUS sense (B device) + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + +#if CFG_TUD_ENABLED && BOARD_TUD_RHPORT == 1 + // B-peripheral session valid override enable + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALEXTOEN; + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBVALOVAL; +#else + USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_PULLDOWNEN; +#endif + +#endif +#endif + + board_init2(); + +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif +} + +uint32_t board_button_read(void) { +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif +} + +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t * stm32_uuid = (volatile uint32_t *) UID_BASE; + uint32_t* id32 = (uint32_t*) (uintptr_t) id; + uint8_t const len = 12; + + id32[0] = stm32_uuid[0]; + id32[1] = stm32_uuid[1]; + id32[2] = stm32_uuid[2]; + + return len; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { +#ifdef UART_DEV + HAL_UART_Transmit(&UartHandle, (uint8_t * )(uintptr_t) + buf, len, 0xffff); + return len; +#else + (void) buf; (void) len; + return -1; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake new file mode 100644 index 000000000..add0dc43d --- /dev/null +++ b/hw/bsp/stm32h7rs/family.cmake @@ -0,0 +1,150 @@ +include_guard() + +set(ST_FAMILY h7rs) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") + +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif () + +if (NOT DEFINED RHPORT_SPEED) + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + if(NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash.ld) + endif() + set(LD_FILE_Clang ${LD_FILE_GNU}) + if(NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif() + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32H7RS ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32h7rs/family.mk b/hw/bsp/stm32h7rs/family.mk new file mode 100644 index 000000000..e2d6d40e4 --- /dev/null +++ b/hw/bsp/stm32h7rs/family.mk @@ -0,0 +1,92 @@ +ST_FAMILY = h7rs +ST_PREFIX = stm32${ST_FAMILY}xx +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver + +UF2_FAMILY_ID = 0x6db66083 + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m7 + +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 1 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# -------------- +# Compiler Flags +# -------------- +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_STM32H7RS \ + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ + +# GCC Flags +CFLAGS_GCC += \ + -flto \ + +# suppress warning caused by vendor mcu driver +CFLAGS_GCC += \ + -Wno-error=cast-align \ + -Wno-error=unused-parameter \ + +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs + +# ----------------- +# Sources & Include +# ----------------- + +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_dma.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_i2c.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart_ex.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s + +# Linker +LD_FILE_GCC = $(ST_CMSIS)/Source/Templates/gcc/linker/$(MCU_VARIANT)_flash.ld +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf diff --git a/hw/bsp/stm32h7rs/stm32h7rsxx_hal_conf.h b/hw/bsp/stm32h7rs/stm32h7rsxx_hal_conf.h new file mode 100644 index 000000000..ea074f7d7 --- /dev/null +++ b/hw/bsp/stm32h7rs/stm32h7rsxx_hal_conf.h @@ -0,0 +1,501 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7rsxx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32h7rsxx_hal_conf.h. + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2022 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7RSxx_HAL_CONF_H +#define STM32H7RSxx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CORDIC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DCMIPP_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_DTS_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +/* #define HAL_GFXMMU_MODULE_ENABLED */ +/* #define HAL_GFXTIM_MODULE_ENABLED */ +/* #define HAL_GPU2D_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +#define HAL_I2C_MODULE_ENABLED +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_I3C_MODULE_ENABLED */ +/* #define HAL_ICACHE_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_MCE_MODULE_ENABLED */ +/* #define HAL_MDF_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_PKA_MODULE_ENABLED */ +/* #define HAL_PSSI_MODULE_ENABLED */ +/* #define HAL_RAMECC_MODULE_ENABLED */ +/* #define HAL_RCC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_XSPI_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 24000000UL /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up (in ms) */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low-power oscillator (CSI) default value. + * This value is the default CSI range value after Reset. + */ +#if !defined (CSI_VALUE) +#define CSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI48) value for USB OTG FS and RNG. + * This internal oscillator is mainly dedicated to provide a high precision clock to + * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry. + * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency + * which is subject to manufacturing process variations. + */ + #if !defined (HSI48_VALUE) + #define HSI48_VALUE 48000000UL /*!< Value of the Internal High Speed oscillator for USB OTG FS/RNG in Hz. + The real value my vary depending on manufacturing process variations. */ + #endif /* HSI48_VALUE */ + +/** +* @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz. + Value of the Internal Low Speed oscillator in Hz. + The real value may vary depending on the variations + in voltage and temperature.*/ +#endif /* LSI_VALUE */ + +/** +* @brief External Low Speed oscillator (LSE) value. +*/ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up (in ms) */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for digital audio interfaces: SPI/I2S, SAI and ADF + * This value is used by the RCC HAL module to provide the digital audio interfaces + * frequency. This clock source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) +#define EXTERNAL_CLOCK_VALUE 48000UL /*!< Value of the external clock source in Hz */ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300UL /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (15UL)/*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U + +/* ########################## Assert Selection ############################## */ +/** +* @brief Uncomment the line below to expanse the "assert_param" macro in the +* HAL drivers code +*/ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Register callback feature configuration ############### */ +/** +* @brief Set below the peripheral configuration to "1U" to add the support +* of HAL callback registration/unregistration feature for the HAL +* driver(s). This allows user application to provide specific callback +* functions thanks to HAL_PPP_RegisterCallback() rather than overwriting +* the default weak callback functions (see each stm32h7rsxx_hal_ppp.h file +* for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef +* for each PPP peripheral). +*/ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U +#define USE_HAL_DCMIPP_REGISTER_CALLBACKS 0U +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U +#define USE_HAL_MDF_REGISTER_CALLBACKS 0U +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U +#define USE_HAL_PKA_REGISTER_CALLBACKS 0U +#define USE_HAL_PSSI_REGISTER_CALLBACKS 0U +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U +#define USE_HAL_SD_REGISTER_CALLBACKS 0U +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U +#define USE_HAL_UART_REGISTER_CALLBACKS 0U +#define USE_HAL_USART_REGISTER_CALLBACKS 0U +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U +#define USE_HAL_XSPI_REGISTER_CALLBACKS 0U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 1U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 0U + +/* ################## HASH peripheral configuration ########################## */ + +#define USE_HAL_HASH_SUSPEND_RESUME 0U + +/* ################## SDMMC peripheral configuration ######################### */ + +#define USE_SD_TRANSCEIVER 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7rsxx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7rsxx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7rsxx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7rsxx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7rsxx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7rsxx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED + #include "stm32h7rsxx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7rsxx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7rsxx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DCMIPP_MODULE_ENABLED + #include "stm32h7rsxx_hal_dcmipp.h" +#endif /* HAL_DCMIPP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7rsxx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED + #include "stm32h7rsxx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7rsxx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7rsxx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7rsxx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7rsxx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32h7rsxx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_GFXTIM_MODULE_ENABLED + #include "stm32h7rsxx_hal_gfxtim.h" +#endif /* HAL_GFXTIM_MODULE_ENABLED */ + +#ifdef HAL_GPU2D_MODULE_ENABLED + #include "stm32h7rsxx_hal_gpu2d.h" +#endif /* HAL_GPU2D_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7rsxx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7rsxx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7rsxx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7rsxx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_I3C_MODULE_ENABLED + #include "stm32h7rsxx_hal_i3c.h" +#endif /* HAL_I3C_MODULE_ENABLED */ + +#ifdef HAL_ICACHE_MODULE_ENABLED + #include "stm32h7rsxx_hal_icache.h" +#endif /* HAL_ICACHE_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7rsxx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7rsxx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7rsxx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32h7rsxx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32h7rsxx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_MCE_MODULE_ENABLED + #include "stm32h7rsxx_hal_mce.h" +#endif /* HAL_MCE_MODULE_ENABLED */ + +#ifdef HAL_MDF_MODULE_ENABLED + #include "stm32h7rsxx_hal_mdf.h" +#endif /* HAL_MDF_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7rsxx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7rsxx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7rsxx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7rsxx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED + #include "stm32h7rsxx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32h7rsxx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7rsxx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7rsxx_hal_ramecc.h" +#endif /* HAL_RAMECC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7rsxx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7rsxx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7rsxx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7rsxx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7rsxx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7rsxx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7rsxx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7rsxx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7rsxx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7rsxx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7rsxx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7rsxx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7rsxx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7rsxx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_XSPI_MODULE_ENABLED + #include "stm32h7rsxx_hal_xspi.h" +#endif /* HAL_XSPI_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7RSxx_HAL_CONF_H */ + diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index dec021f59..76bd251c7 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | XMC4500 | GD32VF103 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | -| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | ST H7S3 HS | XMC4500 | GD32VF103 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:-------------|:------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | hub | n/a | hub | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 25edcf22d..6ab4e0641 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -22,6 +22,7 @@ dwc2_reg_value = { 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'ST H7S3 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], } -- cgit v1.3.1 From f7fa4d0edb2eccfe494d1499a6fc4ef3e039309b Mon Sep 17 00:00:00 2001 From: Jannis Konrad Date: Wed, 5 Feb 2025 17:35:02 +0100 Subject: ch32v3 fs: signal bus speed --- src/portable/wch/dcd_ch32_usbfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index 4e8e25a00..d7674b5a3 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -192,7 +192,8 @@ void dcd_int_handler(uint8_t rhport) { data.xfer[0][TUSB_DIR_OUT].max_size = 64; data.xfer[0][TUSB_DIR_IN].max_size = 64; - dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true); + //dcd_event_bus_reset(rhport, (USBOTG_FS->BASE_CTRL & USBFS_CTRL_LOW_SPEED) ? 1 : 0, true); + dcd_event_bus_reset(rhport, (USBOTG_FS->UDEV_CTRL & USBFS_UDEV_CTRL_LOW_SPEED) ? 1 : 0, true); USBOTG_FS->DEV_ADDR = 0x00; EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; -- cgit v1.3.1 From 169d2d7a1fd120d8d0267eaf0a7dcc5e47059100 Mon Sep 17 00:00:00 2001 From: Jannis Konrad Date: Thu, 6 Feb 2025 08:50:25 +0100 Subject: use speed enum --- src/portable/wch/dcd_ch32_usbfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index d7674b5a3..c248ba14e 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -192,8 +192,8 @@ void dcd_int_handler(uint8_t rhport) { data.xfer[0][TUSB_DIR_OUT].max_size = 64; data.xfer[0][TUSB_DIR_IN].max_size = 64; - //dcd_event_bus_reset(rhport, (USBOTG_FS->BASE_CTRL & USBFS_CTRL_LOW_SPEED) ? 1 : 0, true); - dcd_event_bus_reset(rhport, (USBOTG_FS->UDEV_CTRL & USBFS_UDEV_CTRL_LOW_SPEED) ? 1 : 0, true); + //dcd_event_bus_reset(rhport, (USBOTG_FS->BASE_CTRL & USBFS_CTRL_LOW_SPEED) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL, true); + dcd_event_bus_reset(rhport, (USBOTG_FS->UDEV_CTRL & USBFS_UDEV_CTRL_LOW_SPEED) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL, true); USBOTG_FS->DEV_ADDR = 0x00; EP_RX_CTRL(0) = USBFS_EP_R_RES_ACK; -- cgit v1.3.1 From 93ff3daa116471e41615b85cd7d466cc48bc2148 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 28 Feb 2025 16:41:51 +0700 Subject: fix(hcd_rp2040) assert/panic endpoint already active: when a device reset while having on-going control transfer --- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 48 +++++++++++++++------------- src/portable/raspberrypi/rp2040/rp2040_usb.c | 2 +- 2 files changed, 27 insertions(+), 23 deletions(-) (limited to 'src/portable') diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 2c0a3fd49..478c6e789 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -459,28 +459,33 @@ tusb_speed_t hcd_port_speed_get(uint8_t rhport) } // Close all opened endpoint belong to this device -void hcd_device_close(uint8_t rhport, uint8_t dev_addr) -{ +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { pico_trace("hcd_device_close %d\n", dev_addr); (void) rhport; - if (dev_addr == 0) return; - - for (size_t i = 1; i < TU_ARRAY_SIZE(ep_pool); i++) - { - hw_endpoint_t* ep = &ep_pool[i]; + // reset epx if it is currently active with unplugged device + if (epx.configured && epx.active && epx.dev_addr == dev_addr) { + epx.configured = false; + *epx.endpoint_control = 0; + *epx.buffer_control = 0; + hw_endpoint_reset_transfer(&epx); + } - if (ep->dev_addr == dev_addr && ep->configured) - { - // in case it is an interrupt endpoint, disable it - usb_hw_clear->int_ep_ctrl = (1 << (ep->interrupt_num + 1)); - usb_hw->int_ep_addr_ctrl[ep->interrupt_num] = 0; - - // unconfigure the endpoint - ep->configured = false; - *ep->endpoint_control = 0; - *ep->buffer_control = 0; - hw_endpoint_reset_transfer(ep); + // dev0 only has ep0 + if (dev_addr != 0) { + for (size_t i = 1; i < TU_ARRAY_SIZE(ep_pool); i++) { + hw_endpoint_t *ep = &ep_pool[i]; + if (ep->dev_addr == dev_addr && ep->configured) { + // in case it is an interrupt endpoint, disable it + usb_hw_clear->int_ep_ctrl = (1 << (ep->interrupt_num + 1)); + usb_hw->int_ep_addr_ctrl[ep->interrupt_num] = 0; + + // unconfigure the endpoint + ep->configured = false; + *ep->endpoint_control = 0; + *ep->buffer_control = 0; + hw_endpoint_reset_transfer(ep); + } } } } @@ -557,7 +562,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * } // If a normal transfer (non-interrupt) then initiate using - // sie ctrl registers. Otherwise interrupt ep registers should + // sie ctrl registers. Otherwise, interrupt ep registers should // already be configured if ( ep == &epx ) { @@ -597,13 +602,12 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet (void) rhport; // Copy data into setup packet buffer - for ( uint8_t i = 0; i < 8; i++ ) - { + for (uint8_t i = 0; i < 8; i++) { usbh_dpram->setup_packet[i] = setup_packet[i]; } // Configure EP0 struct with setup info for the trans complete - struct hw_endpoint * ep = _hw_endpoint_allocate(0); + struct hw_endpoint * ep = _hw_endpoint_allocate( (uint8_t) TUSB_XFER_CONTROL); TU_ASSERT(ep); // EPX should be inactive diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 43f48da39..9d0bd762d 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -110,7 +110,7 @@ void __tusb_irq_path_func(_hw_endpoint_buffer_control_update32)(struct hw_endpoi *ep->buffer_control = value & ~USB_BUF_CTRL_AVAIL; // 4.1.2.5.1 Con-current access: 12 cycles (should be good for 48*12Mhz = 576Mhz) after write to buffer control // Don't need delay in host mode as host is in charge - if ( !is_host_mode()) { + if (!is_host_mode()) { busy_wait_at_least_cycles(12); } } -- cgit v1.3.1 From 102c1991d0abcfba9275830c48706ac34d7734d5 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Mar 2025 22:26:28 +0700 Subject: rp2040: abort transfer if active in iso_activate() add hw_endpoint_abort_xfer() --- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 59 ++++++++++++++++------------ 1 file changed, 33 insertions(+), 26 deletions(-) (limited to 'src/portable') diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index b91dd38d5..358ce84bc 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -148,6 +148,32 @@ static void hw_endpoint_xfer(uint8_t ep_addr, uint8_t* buffer, uint16_t total_by hw_endpoint_xfer_start(ep, buffer, total_bytes); } +static void hw_endpoint_abort_xfer(struct hw_endpoint* ep) { + // Abort any pending transfer + // Due to Errata RP2040-E2: ABORT flag is only applicable for B2 and later (unusable for B0, B1). + // Which means we are not guaranteed to safely abort pending transfer on B0 and B1. + const uint8_t dir = tu_edpt_dir(ep->ep_addr); + const uint8_t epnum = tu_edpt_number(ep->ep_addr); + const uint32_t abort_mask = TU_BIT((epnum << 1) | (dir ? 0 : 1)); + if (rp2040_chip_version() >= 2) { + usb_hw_set->abort = abort_mask; + while ((usb_hw->abort_done & abort_mask) != abort_mask) {} + } + + uint32_t buf_ctrl = USB_BUF_CTRL_SEL; // reset to buffer 0 + if (ep->next_pid) { + buf_ctrl |= USB_BUF_CTRL_DATA1_PID; + } + + _hw_endpoint_buffer_control_set_value32(ep, buf_ctrl); + hw_endpoint_reset_transfer(ep); + + if (rp2040_chip_version() >= 2) { + usb_hw_clear->abort_done = abort_mask; + usb_hw_clear->abort = abort_mask; + } +} + static void __tusb_irq_path_func(hw_handle_buff_status)(void) { uint32_t remaining_buffers = usb_hw->buf_status; pico_trace("buf_status = 0x%08lx\r\n", remaining_buffers); @@ -178,25 +204,10 @@ TU_ATTR_ALWAYS_INLINE static inline void reset_ep0(void) { // setup transfer. Also clear a stall in case for (uint8_t dir = 0; dir < 2; dir++) { struct hw_endpoint* ep = hw_endpoint_get_by_num(0, dir); + ep->next_pid = 1u; if (ep->active) { - // Abort any pending transfer from a prior control transfer per USB specs - // Due to Errata RP2040-E2: ABORT flag is only applicable for B2 and later (unusable for B0, B1). - // Which means we are not guaranteed to safely abort pending transfer on B0 and B1. - uint32_t const abort_mask = (dir ? USB_EP_ABORT_EP0_IN_BITS : USB_EP_ABORT_EP0_OUT_BITS); - if (rp2040_chip_version() >= 2) { - usb_hw_set->abort = abort_mask; - while ((usb_hw->abort_done & abort_mask) != abort_mask) {} - } - - _hw_endpoint_buffer_control_set_value32(ep, USB_BUF_CTRL_DATA1_PID | USB_BUF_CTRL_SEL); - hw_endpoint_reset_transfer(ep); - - if (rp2040_chip_version() >= 2) { - usb_hw_clear->abort_done = abort_mask; - usb_hw_clear->abort = abort_mask; - } + hw_endpoint_abort_xfer(ep); // Abort any pending transfer per USB specs } - ep->next_pid = 1u; } } @@ -495,18 +506,14 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet // New API: Configure and enable an ISO endpoint according to descriptor bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) { (void) rhport; - const uint8_t ep_addr = ep_desc->bEndpointAddress; + struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_desc->bEndpointAddress); + TU_ASSERT(ep->hw_data_buf != NULL); // must be inited and allocated previously - // init w/o allocate - const uint16_t mps = ep_desc->wMaxPacketSize; - uint16_t size = (uint16_t)tu_div_ceil(mps, 64) * 64u; - hw_endpoint_init(ep_addr, size, TUSB_XFER_ISOCHRONOUS); + if (ep->active) { + hw_endpoint_abort_xfer(ep); // abort any pending transfer + } - // Fill in endpoint control register with buffer offset - struct hw_endpoint* ep = hw_endpoint_get_by_addr(ep_addr); - TU_ASSERT(ep->hw_data_buf != NULL); // must be inited and buffer allocated ep->wMaxPacketSize = ep_desc->wMaxPacketSize; - hw_endpoint_enable(ep); return true; } -- cgit v1.3.1 From 65e44e0a51272f9d75719d90955f19209dbf1ea2 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Mar 2025 22:46:21 +0700 Subject: fix(dwc2) host driver conflict with max3421e --- examples/host/bare_api/src/tusb_config.h | 3 ++- examples/host/cdc_msc_hid/src/tusb_config.h | 3 ++- examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 3 ++- examples/host/device_info/src/tusb_config.h | 3 ++- examples/host/hid_controller/src/tusb_config.h | 3 ++- examples/host/msc_file_explorer/src/tusb_config.h | 3 ++- src/portable/synopsys/dwc2/hcd_dwc2.c | 2 +- 7 files changed, 13 insertions(+), 7 deletions(-) (limited to 'src/portable') diff --git a/examples/host/bare_api/src/tusb_config.h b/examples/host/bare_api/src/tusb_config.h index fab233be0..a03675c5f 100644 --- a/examples/host/bare_api/src/tusb_config.h +++ b/examples/host/bare_api/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid/src/tusb_config.h b/examples/host/cdc_msc_hid/src/tusb_config.h index a59a0ffb9..cc8d6e5c4 100644 --- a/examples/host/cdc_msc_hid/src/tusb_config.h +++ b/examples/host/cdc_msc_hid/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index 02de4197b..682265f59 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -74,9 +74,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 5190b5b1f..db02a97db 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -74,9 +74,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/hid_controller/src/tusb_config.h b/examples/host/hid_controller/src/tusb_config.h index 3ac591d8f..351fe0178 100644 --- a/examples/host/hid_controller/src/tusb_config.h +++ b/examples/host/hid_controller/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/examples/host/msc_file_explorer/src/tusb_config.h b/examples/host/msc_file_explorer/src/tusb_config.h index c798b4383..c1829c300 100644 --- a/examples/host/msc_file_explorer/src/tusb_config.h +++ b/examples/host/msc_file_explorer/src/tusb_config.h @@ -69,9 +69,10 @@ // Enable Host stack #define CFG_TUH_ENABLED 1 +// #define CFG_TUH_MAX3421 1 // use max3421 as host controller + #if CFG_TUSB_MCU == OPT_MCU_RP2040 // #define CFG_TUH_RPI_PIO_USB 1 // use pio-usb as host controller - // #define CFG_TUH_MAX3421 1 // use max3421 as host controller // host roothub port is 1 if using either pio-usb or max3421 #if (defined(CFG_TUH_RPI_PIO_USB) && CFG_TUH_RPI_PIO_USB) || (defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index ebbb6200a..b13479b02 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -26,7 +26,7 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && defined(TUP_USBIP_DWC2) +#if CFG_TUH_ENABLED && defined(TUP_USBIP_DWC2) && !CFG_TUH_MAX3421 #if !(CFG_TUH_DWC2_SLAVE_ENABLE || CFG_TUH_DWC2_DMA_ENABLE) #error DWC2 require either CFG_TUH_DWC2_SLAVE_ENABLE or CFG_TUH_DWC2_DMA_ENABLE to be enabled -- cgit v1.3.1 From 585bcbfcdd5e24e25dd8d42b51446824b8143602 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 16 Mar 2025 00:07:15 +0100 Subject: Fix 2 IAR warnings. Signed-off-by: HiFiPhile --- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 7d5cfb5b0..7c637ce0c 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -297,7 +297,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dcd_reg->EPLISTSTART = (uint32_t) _dcd.ep; dcd_reg->DATABUFSTART = tu_align((uint32_t) &_dcd, TU_BIT(22)); // 22-bit alignment - dcd_reg->INTSTAT |= dcd_reg->INTSTAT; // clear all pending interrupt + dcd_reg->INTSTAT = dcd_reg->INTSTAT; // clear all pending interrupt dcd_reg->INTEN = INT_DEVICE_STATUS_MASK; dcd_reg->DEVCMDSTAT |= DEVCMDSTAT_DEVICE_ENABLE_MASK | DEVCMDSTAT_DEVICE_CONNECT_MASK | DEVCMDSTAT_RESET_CHANGE_MASK | DEVCMDSTAT_CONNECT_CHANGE_MASK | DEVCMDSTAT_SUSPEND_CHANGE_MASK; @@ -563,7 +563,8 @@ void dcd_int_handler(uint8_t rhport) uint32_t const cmd_stat = dcd_reg->DEVCMDSTAT; - uint32_t int_status = dcd_reg->INTSTAT & dcd_reg->INTEN; + uint32_t int_status = dcd_reg->INTSTAT; + int_status &= dcd_reg->INTEN; dcd_reg->INTSTAT = int_status; // Acknowledge handled interrupt if (int_status == 0) return; -- cgit v1.3.1 From 65e01fff2e7ab5302baa45bdd81a1d774e269452 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 16:15:58 +0700 Subject: add tuh_edpt_close() API, it will abort any pending transfer implement hcd_edpt_close() for pio-usb and max3421e, also move max3421e api into its own header. --- examples/host/bare_api/src/main.c | 254 +++++++++++-------------- src/host/hcd.h | 3 + src/host/usbh.c | 6 + src/host/usbh.h | 7 + src/portable/analog/max3421/hcd_max3421.c | 40 ++-- src/portable/analog/max3421/hcd_max3421.h | 63 ++++++ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 5 + tools/get_deps.py | 4 +- 8 files changed, 218 insertions(+), 164 deletions(-) create mode 100644 src/portable/analog/max3421/hcd_max3421.h (limited to 'src/portable') diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index f582f4f5a..0c76ff0c9 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -55,16 +55,15 @@ uint8_t* get_hid_buf(uint8_t daddr); void free_hid_buf(uint8_t daddr); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Bare API Example\r\n"); // init host stack on configured roothub port tusb_rhport_init_t host_init = { - .role = TUSB_ROLE_HOST, - .speed = TUSB_SPEED_AUTO + .role = TUSB_ROLE_HOST, + .speed = TUSB_SPEED_AUTO }; tusb_init(BOARD_TUH_RHPORT, &host_init); @@ -72,8 +71,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { // tinyusb host task tuh_task(); led_blinking_task(); @@ -85,8 +83,7 @@ int main(void) /*------------- TinyUSB Callbacks -------------*/ // Invoked when device is mounted (configured) -void tuh_mount_cb (uint8_t daddr) -{ +void tuh_mount_cb(uint8_t daddr) { printf("Device attached, address = %d\r\n", daddr); // Get Device Descriptor @@ -95,8 +92,7 @@ void tuh_mount_cb (uint8_t daddr) } /// Invoked when device is unmounted (bus reset/unplugged) -void tuh_umount_cb(uint8_t daddr) -{ +void tuh_umount_cb(uint8_t daddr) { printf("Device removed, address = %d\r\n", daddr); free_hid_buf(daddr); } @@ -104,11 +100,8 @@ void tuh_umount_cb(uint8_t daddr) //--------------------------------------------------------------------+ // Device Descriptor //--------------------------------------------------------------------+ - -void print_device_descriptor(tuh_xfer_t* xfer) -{ - if ( XFER_RESULT_SUCCESS != xfer->result ) - { +void print_device_descriptor(tuh_xfer_t *xfer) { + if (XFER_RESULT_SUCCESS != xfer->result) { printf("Failed to get device descriptor\r\n"); return; } @@ -131,33 +124,29 @@ void print_device_descriptor(tuh_xfer_t* xfer) // Get String descriptor using Sync API uint16_t temp_buf[128]; - printf(" iManufacturer %u " , desc_device.iManufacturer); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) ) - { + printf(" iManufacturer %u ", desc_device.iManufacturer); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iProduct %u " , desc_device.iProduct); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iProduct %u ", desc_device.iProduct); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" iSerialNumber %u " , desc_device.iSerialNumber); - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) - { + printf(" iSerialNumber %u ", desc_device.iSerialNumber); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf))) { print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf)); } printf("\r\n"); - printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); // Get configuration descriptor with sync API - if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) - { - parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf); + if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf))) { + parse_config_descriptor(daddr, (tusb_desc_configuration_t *) temp_buf); } } @@ -171,37 +160,33 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); // simple configuration parser to open and listen to HID Endpoint IN -void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) -{ - uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); - uint8_t const* p_desc = tu_desc_next(desc_cfg); +void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const *desc_cfg) { + uint8_t const *desc_end = ((uint8_t const *) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength); + uint8_t const *p_desc = tu_desc_next(desc_cfg); // parse each interfaces - while( p_desc < desc_end ) - { + while (p_desc < desc_end) { uint8_t assoc_itf_count = 1; // Class will always starts with Interface Association (if any) and then Interface descriptor - if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) - { - tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; + if (TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc)) { + tusb_desc_interface_assoc_t const *desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; assoc_itf_count = desc_iad->bInterfaceCount; - p_desc = tu_desc_next(p_desc); // next to Interface + p_desc = tu_desc_next(p_desc);// next to Interface } // must be interface from now - if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return; - tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc; + if (TUSB_DESC_INTERFACE != tu_desc_type(p_desc)) { return; } + tusb_desc_interface_t const *desc_itf = (tusb_desc_interface_t const *) p_desc; - uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end-p_desc)); + uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, (uint16_t) (desc_end - p_desc)); // probably corrupted descriptor - if(drv_len < sizeof(tusb_desc_interface_t)) return; + if (drv_len < sizeof(tusb_desc_interface_t)) { return; } // only open and listen to HID endpoint IN - if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) - { + if (desc_itf->bInterfaceClass == TUSB_CLASS_HID) { open_hid_interface(dev_addr, desc_itf, drv_len); } @@ -210,25 +195,21 @@ void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* } } -uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len) -{ - uint8_t const* p_desc = (uint8_t const*) desc_itf; +uint16_t count_interface_total_len(tusb_desc_interface_t const *desc_itf, uint8_t itf_count, uint16_t max_len) { + uint8_t const *p_desc = (uint8_t const *) desc_itf; uint16_t len = 0; - while (itf_count--) - { + while (itf_count--) { // Next on interface desc len += tu_desc_len(desc_itf); p_desc = tu_desc_next(p_desc); - while (len < max_len) - { + while (len < max_len) { // return on IAD regardless of itf count - if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len; + if (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION) { return len; } - if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && - ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 ) - { + if ((tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) && + ((tusb_desc_interface_t const *) p_desc)->bAlternateSetting == 0) { break; } @@ -246,46 +227,45 @@ uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_ void hid_report_received(tuh_xfer_t* xfer); -void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) -{ +void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) { // len = interface + hid + n*endpoints uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); // corrupted descriptor - if (max_len < drv_len) return; + if (max_len < drv_len) { return; } uint8_t const *p_desc = (uint8_t const *) desc_itf; // HID descriptor p_desc = tu_desc_next(p_desc); tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc; - if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return; + if (HID_DESC_TYPE_HID != desc_hid->bDescriptorType) { return; } // Endpoint descriptor p_desc = tu_desc_next(p_desc); - tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc; - - for(int i = 0; i < desc_itf->bNumEndpoints; i++) - { - if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return; - - if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) - { - // skip if failed to open endpoint - if ( ! tuh_edpt_open(daddr, desc_ep) ) return; - - uint8_t* buf = get_hid_buf(daddr); - if (!buf) return; // out of memory - - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = desc_ep->bEndpointAddress, - .buflen = 64, - .buffer = buf, - .complete_cb = hid_report_received, - .user_data = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer + tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc; + + for (int i = 0; i < desc_itf->bNumEndpoints; i++) { + if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) { return; } + + if (tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN) { + if (!tuh_edpt_open(daddr, desc_ep)) { + return; // skip if failed to open endpoint + } + + uint8_t *buf = get_hid_buf(daddr); + if (!buf) { + return;// out of memory + } + + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = desc_ep->bEndpointAddress, + .buflen = 64, + .buffer = buf, + .complete_cb = hid_report_received, + .user_data = (uintptr_t) buf,// since buffer is not available in callback, use user data to store the buffer }; // submit transfer for this EP @@ -299,18 +279,17 @@ void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, ui } } -void hid_report_received(tuh_xfer_t* xfer) -{ +void hid_report_received(tuh_xfer_t *xfer) { // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback - uint8_t* buf = (uint8_t*) xfer->user_data; + uint8_t *buf = (uint8_t *) xfer->user_data; - if (xfer->result == XFER_RESULT_SUCCESS) - { + if (xfer->result == XFER_RESULT_SUCCESS) { printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr); - for(uint32_t i=0; iactual_len; i++) - { - if (i%16 == 0) printf("\r\n "); + for (uint32_t i = 0; i < xfer->actual_len; i++) { + if (i % 16 == 0) { + printf("\r\n "); + } printf("%02X ", buf[i]); } printf("\r\n"); @@ -329,12 +308,9 @@ void hid_report_received(tuh_xfer_t* xfer) //--------------------------------------------------------------------+ // get an buffer from pool -uint8_t* get_hid_buf(uint8_t daddr) -{ - for(size_t i=0; i> 6 & 0x1F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } else { - // TODO: Verify surrogate. - *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F)); - *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F)); - } - // TODO: Handle UTF-16 code points that take two entries. + // TODO: Check for runover. + (void) utf8_len; + // Get the UTF-16 length out of the data itself. + + for (size_t i = 0; i < utf16_len; i++) { + uint16_t chr = utf16[i]; + if (chr < 0x80) { + *utf8++ = chr & 0xffu; + } else if (chr < 0x800) { + *utf8++ = (uint8_t) (0xC0 | (chr >> 6 & 0x1F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); + } else { + // TODO: Verify surrogate. + *utf8++ = (uint8_t) (0xE0 | (chr >> 12 & 0x0F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 6 & 0x3F)); + *utf8++ = (uint8_t) (0x80 | (chr >> 0 & 0x3F)); } + // TODO: Handle UTF-16 code points that take two entries. + } } // Count how many bytes a utf-16-le encoded string will take in utf-8. static int _count_utf8_bytes(const uint16_t *buf, size_t len) { - size_t total_bytes = 0; - for (size_t i = 0; i < len; i++) { - uint16_t chr = buf[i]; - if (chr < 0x80) { - total_bytes += 1; - } else if (chr < 0x800) { - total_bytes += 2; - } else { - total_bytes += 3; - } - // TODO: Handle UTF-16 code points that take two entries. + size_t total_bytes = 0; + for (size_t i = 0; i < len; i++) { + uint16_t chr = buf[i]; + if (chr < 0x80) { + total_bytes += 1; + } else if (chr < 0x800) { + total_bytes += 2; + } else { + total_bytes += 3; } - return (int) total_bytes; + // TODO: Handle UTF-16 code points that take two entries. + } + return (int) total_bytes; } static void print_utf16(uint16_t *temp_buf, size_t buf_len) { - if ((temp_buf[0] & 0xff) == 0) return; // empty - size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); - size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); - _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); - ((uint8_t*) temp_buf)[utf8_len] = '\0'; + if ((temp_buf[0] & 0xff) == 0) return;// empty + size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t); + size_t utf8_len = (size_t) _count_utf8_bytes(temp_buf + 1, utf16_len); + _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); + ((uint8_t *) temp_buf)[utf8_len] = '\0'; - printf("%s", (char*)temp_buf); + printf("%s", (char *) temp_buf); } diff --git a/src/host/hcd.h b/src/host/hcd.h index 56b6fdb5d..aa9e9cf3b 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -165,6 +165,9 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); // Open an endpoint bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); +// Close an endpoint +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); + // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); diff --git a/src/host/usbh.c b/src/host/usbh.c index 308916c9b..5925a7be0 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -994,6 +994,12 @@ bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const* desc_ep) { return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr) { + TU_VERIFY(0 != tu_edpt_number(ep_addr)); // cannot close EP0 + tuh_edpt_abort_xfer(daddr, ep_addr); // abort any pending transfer + return hcd_edpt_close(usbh_get_rhport(daddr), daddr, ep_addr); +} + bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev); diff --git a/src/host/usbh.h b/src/host/usbh.h index d95bb9b57..4829a8183 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -33,6 +33,10 @@ #include "common/tusb_common.h" +#if CFG_TUH_MAX3421 +#include "portable/analog/max3421/hcd_max3421.h" +#endif + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -227,6 +231,9 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer); // Open a non-control endpoint bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); +// Close a non-control endpoint, it will abort any pending transfer +bool tuh_edpt_close(uint8_t daddr, uint8_t ep_addr); + // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index c5e924266..3fbf950a4 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -252,28 +252,6 @@ static tuh_configure_max3421_t _tuh_cfg = { .pinctl = 0, // default: negative edge interrupt }; -//--------------------------------------------------------------------+ -// API: SPI transfer with MAX3421E -// - spi_cs_api(), spi_xfer_api(), int_api(): must be implemented by application -// - reg_read(), reg_write(): is implemented by this driver, can be used by application -//--------------------------------------------------------------------+ - -// API to control MAX3421 SPI CS -extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); - -// API to transfer data with MAX3421 SPI -// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only -extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); - -// API to enable/disable MAX3421 INTR pin interrupt -extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); - -// API to read MAX3421's register. Implemented by TinyUSB -uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); - -// API to write MAX3421's register. Implemented by TinyUSB -bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); - //--------------------------------------------------------------------+ // SPI Commands and Helper //--------------------------------------------------------------------+ @@ -632,6 +610,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e if (daddr == 0 && ep_num == 0) { ep = &_hcd_data.ep[0]; }else { + if (NULL != find_ep_not_addr0(daddr, ep_num, ep_dir)) { + return false; // endpoint already opened + } ep = allocate_ep(); TU_ASSERT(ep); ep->daddr = daddr; @@ -645,6 +626,21 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; + uint8_t const ep_num = tu_edpt_number(ep_addr); + tusb_dir_t const ep_dir = tu_edpt_dir(ep_addr); + max3421_ep_t * ep = find_ep_not_addr0(daddr, ep_num, ep_dir); + + if (!ep) { + return false; // not opened + } + + tu_memclr(ep, sizeof(max3421_ep_t)); + + return true; +} + /* The microcontroller repeatedly writes the SNDFIFO register R2 to load the FIFO with up to 64 data bytes. * Then the microcontroller writes the SNDBC register, which this does three things: * 1. Tells the MAX3421E SIE (Serial Interface Engine) how many bytes in the FIFO to send. diff --git a/src/portable/analog/max3421/hcd_max3421.h b/src/portable/analog/max3421/hcd_max3421.h new file mode 100644 index 000000000..4631fa21a --- /dev/null +++ b/src/portable/analog/max3421/hcd_max3421.h @@ -0,0 +1,63 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2025 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ +#ifndef TUSB_HCD_MAX3421_H +#define TUSB_HCD_MAX3421_H + +#ifdef __cplusplus + extern "C" { +#endif + +//--------------------------------------------------------------------+ +// SPI transfer API with MAX3421E are implemented by application +// - spi_cs_api(), spi_xfer_api(), int_api() +//--------------------------------------------------------------------+ + +// API to control MAX3421 SPI CS +extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); + +// API to enable/disable MAX3421 INTR pin interrupt +extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); + +//--------------------------------------------------------------------+ +// API for read/write MAX3421 registers +// are implemented by this driver, can be used by application +//--------------------------------------------------------------------+ + +// API to read MAX3421's register. Implemented by TinyUSB +uint8_t tuh_max3421_reg_read(uint8_t rhport, uint8_t reg, bool in_isr); + +// API to write MAX3421's register. Implemented by TinyUSB +bool tuh_max3421_reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr); + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 6422afff1..225a44dcf 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -122,6 +122,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const *) desc_ep, need_pre); } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + uint8_t const pio_rhport = RHPORT_PIO(rhport); + return pio_usb_host_endpoint_close(pio_rhport, daddr, ep_addr); +} + bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen); diff --git a/tools/get_deps.py b/tools/get_deps.py index 3f529bd7e..ba9dc23ce 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -58,8 +58,8 @@ deps_optional = { 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], - 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - '0ca3657d55ea20e7fa4483bbd21ce951bc1d6fa5', + 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', + '810653f66adadba3e0e4b4b56d5167ac4f7fdbf7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1 From 901ce2ad93b39c08e8e6b7e5b3f4dbd0b9df879e Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Mar 2025 21:13:01 +0700 Subject: hcd/ehci: hcd_edpt_open() return false if ep is already opened. implement hcd_edpt_close() --- hw/bsp/imxrt/family.c | 4 +- src/device/usbd.c | 9 +- src/host/usbh.c | 2 +- src/portable/ehci/ehci.c | 259 ++++++++++++++++++++------------------ src/portable/ehci/ehci.h | 314 +++++++++++++++++++++++------------------------ test/hil/hil_test.py | 3 +- 6 files changed, 301 insertions(+), 290 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index 7b89cc76d..7e4734a66 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -61,7 +61,7 @@ - Define CFG_TUSB_MEM_SECTION=__attribute__((section("NonCacheable"))) */ -static void BOARD_ConfigMPU(void); +// static void BOARD_ConfigMPU(void); // needed by fsl_flexspi_nor_boot TU_ATTR_USED const uint8_t dcd_data[] = {0x00}; @@ -456,7 +456,7 @@ static void BOARD_ConfigMPU(void) { #elif __CORTEX_M == 4 -void BOARD_ConfigMPU(void) { +static void BOARD_ConfigMPU(void) { #if defined(__CC_ARM) || defined(__ARMCC_VERSION) extern uint32_t Image$$RW_m_ncache$$Base[]; /* RW_m_ncache_unused is a auxiliary region which is used to get the whole size of noncache section */ diff --git a/src/device/usbd.c b/src/device/usbd.c index fb5cec49d..9c381d5e0 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -561,8 +561,7 @@ static void usbd_reset(uint8_t rhport) { } bool tud_task_event_ready(void) { - // Skip if stack is not initialized - if (!tud_inited()) return false; + TU_VERIFY(tud_inited()); // Skip if stack is not initialized return !osal_queue_empty(_usbd_q); } @@ -684,7 +683,9 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { case USBD_EVENT_FUNC_CALL: TU_LOG_USBD("\r\n"); - if (event.func_call.func) event.func_call.func(event.func_call.param); + if (event.func_call.func) { + event.func_call.func(event.func_call.param); + } break; case DCD_EVENT_SOF: @@ -701,7 +702,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) { #if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO // return if there is no more events, for application to run other background - if (osal_queue_empty(_usbd_q)) return; + if (osal_queue_empty(_usbd_q)) { return; } #endif } } diff --git a/src/host/usbh.c b/src/host/usbh.c index 5925a7be0..e60db53da 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -520,7 +520,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // Loop until there is no more events in the queue while (1) { hcd_event_t event; - if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) return; + if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) { return; } switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 01bbf62bf..292a352fb 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -62,8 +62,7 @@ #define QHD_MAX (CFG_TUH_DEVICE_MAX*CFG_TUH_ENDPOINT_MAX + CFG_TUH_HUB) #define QTD_MAX QHD_MAX -typedef struct -{ +typedef struct { ehci_link_t period_framelist[FRAMELIST_SIZE]; // TODO only implement 1 ms & 2 ms & 4 ms, 8 ms (framelist) @@ -139,6 +138,12 @@ static ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd); static void qhd_remove_qtd(ehci_qhd_t *qhd); +TU_ATTR_ALWAYS_INLINE static inline bool qhd_is_periodic(ehci_qhd_t const *qhd) { + return qhd->int_smask != 0; +} +TU_ATTR_ALWAYS_INLINE static inline uint8_t qhd_ep_addr(ehci_qhd_t const *qhd) { + return tu_edpt_addr(qhd->ep_number, qhd->pid); +} TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr); TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_find_free (void); @@ -146,9 +151,10 @@ static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); -TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next (ehci_link_t const *p_link); -static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr); +TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *entry, uint8_t type); +TU_ATTR_ALWAYS_INLINE static inline void list_remove(ehci_link_t* head, ehci_link_t* prev, ehci_qhd_t* qhd); +static void list_remove_qhd_by_addr(ehci_link_t *list_head, uint8_t dev_addr, uint8_t ep_addr); static void ehci_disable_schedule(ehci_registers_t* regs, bool is_period) { // maybe have a timeout for status @@ -175,15 +181,12 @@ static void ehci_enable_schedule(ehci_registers_t* regs, bool is_period) { //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ - -uint32_t hcd_frame_number(uint8_t rhport) -{ +uint32_t hcd_frame_number(uint8_t rhport) { (void) rhport; return (ehci_data.uframe_number + ehci_data.regs->frame_index) >> 3; } -void hcd_port_reset(uint8_t rhport) -{ +void hcd_port_reset(uint8_t rhport) { (void) rhport; ehci_registers_t* regs = ehci_data.regs; @@ -204,8 +207,7 @@ void hcd_port_reset(uint8_t rhport) regs->portsc = portsc; } -void hcd_port_reset_end(uint8_t rhport) -{ +void hcd_port_reset_end(uint8_t rhport) { (void) rhport; ehci_registers_t* regs = ehci_data.regs; @@ -221,32 +223,29 @@ void hcd_port_reset_end(uint8_t rhport) regs->portsc = portsc; } -bool hcd_port_connect_status(uint8_t rhport) -{ +bool hcd_port_connect_status(uint8_t rhport) { (void) rhport; return ehci_data.regs->portsc_bm.current_connect_status; } -tusb_speed_t hcd_port_speed_get(uint8_t rhport) -{ +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { (void) rhport; return (tusb_speed_t) ehci_data.regs->portsc_bm.nxp_port_speed; // NXP specific port speed } // Close all opened endpoint belong to this device -void hcd_device_close(uint8_t rhport, uint8_t daddr) -{ +void hcd_device_close(uint8_t rhport, uint8_t daddr) { // skip dev0 if (daddr == 0) { return; } - // Remove from async list - list_remove_qhd_by_daddr((ehci_link_t *) list_get_async_head(rhport), daddr); + // Remove from async list all endpoints of this device + list_remove_qhd_by_addr((ehci_link_t *) list_get_async_head(rhport), daddr, TUSB_INDEX_INVALID_8); - // Remove from all interval period list - for(uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) { - list_remove_qhd_by_daddr((ehci_link_t *) &ehci_data.period_head_arr[i], daddr); + // Remove from all interval period list of this device + for (uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) { + list_remove_qhd_by_addr((ehci_link_t *) &ehci_data.period_head_arr[i], daddr, TUSB_INDEX_INVALID_8); } // Async doorbell (EHCI 4.8.2 for operational details) @@ -358,12 +357,10 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) } #if 0 -static void ehci_stop(uint8_t rhport) -{ +static void ehci_stop(uint8_t rhport) { (void) rhport; ehci_registers_t* regs = ehci_data.regs; - regs->command_bm.run_stop = 0; // USB Spec: controller has to stop within 16 uframe = 2 frames @@ -375,41 +372,44 @@ static void ehci_stop(uint8_t rhport) // Endpoint API //--------------------------------------------------------------------+ -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; - +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { // TODO not support ISO yet TU_ASSERT (ep_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS); //------------- Prepare Queue Head -------------// - ehci_qhd_t *p_qhd = (ep_desc->bEndpointAddress == 0) ? qhd_control(dev_addr) : qhd_find_free(); + ehci_qhd_t *p_qhd; + if (ep_desc->bEndpointAddress == 0) { + p_qhd = qhd_control(dev_addr); + } else { + TU_VERIFY(NULL == qhd_get_from_addr(dev_addr, ep_desc->bEndpointAddress)); // ep not opened yet + p_qhd = qhd_find_free(); + } TU_ASSERT(p_qhd); - qhd_init(p_qhd, dev_addr, ep_desc); - // control of dev0 is always present as async head - if ( dev_addr == 0 ) return true; + // control of dev0 always exists as async head + if (dev_addr == 0) { + return true; + } // Insert to list ehci_link_t * list_head = NULL; - - switch (ep_desc->bmAttributes.xfer) - { + switch (ep_desc->bmAttributes.xfer) { case TUSB_XFER_CONTROL: case TUSB_XFER_BULK: - list_head = (ehci_link_t*) list_get_async_head(rhport); - break; + list_head = (ehci_link_t *) list_get_async_head(rhport); + break; case TUSB_XFER_INTERRUPT: list_head = list_get_period_head(rhport, p_qhd->interval_ms); - break; + break; case TUSB_XFER_ISOCHRONOUS: // TODO iso is not supported - break; + break; - default: break; + default: + break; } TU_ASSERT(list_head); @@ -421,8 +421,23 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) -{ +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + ehci_qhd_t* qhd = qhd_get_from_addr(daddr, ep_addr); + TU_VERIFY(qhd != NULL); + + ehci_link_t * list_head; + if (qhd_is_periodic(qhd)) { + // interrupt endpoint + list_head = list_get_period_head(rhport, qhd->interval_ms);; + } else { + list_head = (ehci_link_t *) list_get_async_head(rhport); + } + + list_remove_qhd_by_addr(list_head, daddr, ep_addr); + return true; +} + +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void) rhport; ehci_qhd_t* qhd = &ehci_data.control[dev_addr].qhd; @@ -444,14 +459,14 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet return true; } -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) -{ +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { (void) rhport; uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); + TU_VERIFY(qhd != NULL); ehci_qtd_t* qtd; if (epnum == 0) { @@ -540,8 +555,7 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { // This isr mean it is safe to modify previously removed queue head from async list. // In tinyusb, queue head is only removed when device is unplugged. TU_ATTR_ALWAYS_INLINE static inline -void async_advance_isr(uint8_t rhport) -{ +void async_advance_isr(uint8_t rhport) { (void) rhport; ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; @@ -612,8 +626,7 @@ void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { } TU_ATTR_ALWAYS_INLINE static inline -void proccess_async_xfer_isr(ehci_qhd_t * const list_head) -{ +void proccess_async_xfer_isr(ehci_qhd_t * const list_head) { ehci_qhd_t *qhd = list_head; do { @@ -623,8 +636,7 @@ void proccess_async_xfer_isr(ehci_qhd_t * const list_head) } TU_ATTR_ALWAYS_INLINE static inline -void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) -{ +void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) { uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u); ehci_link_t next_link = *list_get_period_head(rhport, interval_ms); @@ -726,51 +738,55 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next(ehci_link_t const *p_ return (ehci_link_t*) tu_align32(p_link->address); } -TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) -{ - new->address = current->address; - current->address = ((uint32_t) new) | (new_type << 1); +TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *entry, uint8_t type) { + entry->address = current->address; + current->address = ((uint32_t) entry) | (type << 1); +} + +// Remove a queue head from the list. +// Per EHCI 4.8.2 the removed qhd's next is linked to list head (which always reachable by Host Controller) +// TODO support iTD/siTD +TU_ATTR_ALWAYS_INLINE static inline void list_remove(ehci_link_t* head, ehci_link_t* prev, ehci_qhd_t* qhd) { + // TODO deactivate all TD, wait for QHD to inactive before removal + prev->address = qhd->next.address; + + // link the removed qhd's next to list head + qhd->next.address = ((uint32_t) head) | (EHCI_QTYPE_QHD << 1); + + if (qhd_is_periodic(qhd)) { + // period list queue element is guarantee to be free in the next frame (1 ms) + qhd->used = 0; + } else { + // async list use async advance handshake. Mark as removing, will completely re-usable when async advance isr occurs + qhd->removing = 1; + } + + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); } -// Remove all queue head belong to this device address -static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { - ehci_link_t* prev = list_head; +// Remove queue head belong to this device address +static void list_remove_qhd_by_addr(ehci_link_t *list_head, uint8_t dev_addr, uint8_t ep_addr) { + ehci_link_t *prev = list_head; while (prev && !prev->terminate) { - ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); + ehci_qhd_t *qhd = (ehci_qhd_t *) (uintptr_t) list_next(prev); // done if loop back to head - if ( (uintptr_t) qhd == (uintptr_t) list_head) { + if ((uintptr_t) qhd == (uintptr_t) list_head) { break; } - if ( qhd->dev_addr == dev_addr ) { - // TODO deactivate all TD, wait for QHD to inactive before removal - prev->address = qhd->next.address; - - // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) - qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); - - if ( qhd->int_smask ) - { - // period list queue element is guarantee to be free in the next frame (1 ms) - qhd->used = 0; - }else - { - // async list use async advance handshake - // mark as removing, will completely re-usable when async advance isr occurs - qhd->removing = 1; - } - - hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); - hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); - }else { + // ep_addr is 0xff means all endpoints of this device address + if (qhd->dev_addr == dev_addr && + (ep_addr == TUSB_INDEX_INVALID_8 || qhd_ep_addr(qhd) == ep_addr)) { + list_remove(list_head, prev, qhd); + } else { prev = list_next(prev); } } } - //--------------------------------------------------------------------+ // Queue Header helper //--------------------------------------------------------------------+ @@ -782,8 +798,10 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr) { // Find a free queue head TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_find_free(void) { - for ( uint32_t i = 0; i < QHD_MAX; i++ ) { - if ( !ehci_data.qhd_pool[i].used ) return &ehci_data.qhd_pool[i]; + for (uint32_t i = 0; i < QHD_MAX; i++) { + if (!ehci_data.qhd_pool[i].used) { + return &ehci_data.qhd_pool[i]; + } } return NULL; } @@ -800,10 +818,9 @@ static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { } ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; - - for ( uint32_t i = 0; i < QHD_MAX; i++ ) { - if ( (qhd_pool[i].dev_addr == dev_addr) && - ep_addr == tu_edpt_addr(qhd_pool[i].ep_number, qhd_pool[i].pid) ) { + for (uint32_t i = 0; i < QHD_MAX; i++) { + if ((qhd_pool[i].dev_addr == dev_addr) && + ep_addr == qhd_ep_addr(&qhd_pool[i])) { return &qhd_pool[i]; } } @@ -812,8 +829,7 @@ static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { } // Init queue head with endpoint descriptor -static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) -{ +static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { // address 0 is used as async head, which always on the list --> cannot be cleared (ehci halted otherwise) if (dev_addr != 0) { tu_memclr(p_qhd, sizeof(ehci_qhd_t)); @@ -830,39 +846,43 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c p_qhd->ep_number = tu_edpt_number(ep_desc->bEndpointAddress); p_qhd->ep_speed = devtree_info.speed; p_qhd->data_toggle_control= (xfer_type == TUSB_XFER_CONTROL) ? 1 : 0; - p_qhd->head_list_flag = (dev_addr == 0) ? 1 : 0; // addr0's endpoint is the static asyn list head + p_qhd->head_list_flag = (dev_addr == 0) ? 1 : 0; // addr0's endpoint is the static async list head p_qhd->max_packet_size = tu_edpt_packet_size(ep_desc); p_qhd->fl_ctrl_ep_flag = ((xfer_type == TUSB_XFER_CONTROL) && (p_qhd->ep_speed != TUSB_SPEED_HIGH)) ? 1 : 0; p_qhd->nak_reload = 0; - // Bulk/Control -> smask = cmask = 0 - // TODO Isochronous - if (TUSB_XFER_INTERRUPT == xfer_type) - { - if (TUSB_SPEED_HIGH == p_qhd->ep_speed) - { - TU_ASSERT( interval <= 16, ); - if ( interval < 4) // sub millisecond interval - { - p_qhd->interval_ms = 0; - p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) : - (interval == 2) ? TU_BIN8(10101010) : TU_BIN8(01000100); - }else - { - p_qhd->interval_ms = (uint8_t) tu_min16( 1 << (interval-4), 255 ); - p_qhd->int_smask = TU_BIT(interval % 8); + switch (xfer_type) { + case TUSB_XFER_CONTROL: + case TUSB_XFER_BULK: + p_qhd->int_smask = p_qhd->fl_int_cmask = 0; + break; + + case TUSB_XFER_INTERRUPT: + if (TUSB_SPEED_HIGH == p_qhd->ep_speed) { + TU_ASSERT(interval <= 16, ); + if (interval < 4) { + // sub millisecond interval + p_qhd->interval_ms = 0; + p_qhd->int_smask = (interval == 1) ? TU_BIN8(11111111) : + (interval == 2) ? TU_BIN8(10101010): TU_BIN8(01000100); + } else { + p_qhd->interval_ms = (uint8_t) tu_min16(1 << (interval - 4), 255); + p_qhd->int_smask = TU_BIT(interval % 8); + } + } else { + TU_ASSERT(0 != interval, ); + // Full/Low: 4.12.2.1 (EHCI) case 1 schedule start split at 1 us & complete split at 2,3,4 uframes + p_qhd->int_smask = 0x01; + p_qhd->fl_int_cmask = TU_BIN8(11100); + p_qhd->interval_ms = interval; } - }else - { - TU_ASSERT( 0 != interval, ); - // Full/Low: 4.12.2.1 (EHCI) case 1 schedule start split at 1 us & complete split at 2,3,4 uframes - p_qhd->int_smask = 0x01; - p_qhd->fl_int_cmask = TU_BIN8(11100); - p_qhd->interval_ms = interval; - } - }else - { - p_qhd->int_smask = p_qhd->fl_int_cmask = 0; + break; + + case TUSB_XFER_ISOCHRONOUS: + // TODO not support ISO yet + break; + + default: break; } p_qhd->fl_hub_addr = devtree_info.hub_addr; @@ -880,8 +900,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c p_qhd->qtd_overlay.next.terminate = 1; p_qhd->qtd_overlay.alternate.terminate = 1; - if (TUSB_XFER_BULK == xfer_type && p_qhd->ep_speed == TUSB_SPEED_HIGH && p_qhd->pid == EHCI_PID_OUT) - { + if (TUSB_XFER_BULK == xfer_type && p_qhd->ep_speed == TUSB_SPEED_HIGH && p_qhd->pid == EHCI_PID_OUT) { p_qhd->qtd_overlay.ping_err = 1; // do PING for Highspeed Bulk OUT, EHCI section 4.11 } } diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index 457adc1d3..87659701b 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -49,15 +49,14 @@ // TODO merge OHCI with EHCI enum { - EHCI_MAX_ITD = 4, + EHCI_MAX_ITD = 4, EHCI_MAX_SITD = 16 }; //--------------------------------------------------------------------+ // EHCI Data Structure //--------------------------------------------------------------------+ -enum -{ +enum { EHCI_QTYPE_ITD = 0 , EHCI_QTYPE_QHD , EHCI_QTYPE_SITD , @@ -65,8 +64,7 @@ enum }; /// EHCI PID -enum -{ +enum { EHCI_PID_OUT = 0 , EHCI_PID_IN , EHCI_PID_SETUP @@ -74,187 +72,182 @@ enum /// Link pointer typedef union { - uint32_t address; - struct { - uint32_t terminate : 1; - uint32_t type : 2; - }; -}ehci_link_t; + uint32_t address; + struct { + uint32_t terminate : 1; + uint32_t type : 2; + }; +} ehci_link_t; TU_VERIFY_STATIC( sizeof(ehci_link_t) == 4, "size is not correct" ); /// Queue Element Transfer Descriptor /// Qtd is used to declare overlay in ehci_qhd_t -> cannot be declared with TU_ATTR_ALIGNED(32) -typedef struct -{ - // Word 0: Next QTD Pointer - ehci_link_t next; - - // Word 1: Alternate Next QTD Pointer (not used) - union{ - ehci_link_t alternate; - struct { - uint32_t : 5; - uint32_t used : 1; - uint32_t : 10; - uint32_t expected_bytes : 16; - }; - }; - - // Word 2: qTQ Token - volatile uint32_t ping_err : 1 ; ///< For Highspeed: 0 Out, 1 Ping. Full/Slow used as error indicator - volatile uint32_t non_hs_split_state : 1 ; ///< Used by HC to track the state of split transaction - volatile uint32_t non_hs_missed_uframe : 1 ; ///< HC misses a complete split transaction - volatile uint32_t xact_err : 1 ; ///< Error (Timeout, CRC, Bad PID ... ) - volatile uint32_t babble_err : 1 ; ///< Babble detected, also set Halted bit to 1 - volatile uint32_t buffer_err : 1 ; ///< Data overrun/underrun error - volatile uint32_t halted : 1 ; ///< Serious error or STALL received - volatile uint32_t active : 1 ; ///< Start transfer, clear by HC when complete - - uint32_t pid : 2 ; ///< 0: OUT, 1: IN, 2 Setup - volatile uint32_t err_count : 2 ; ///< Error Counter of consecutive errors - volatile uint32_t current_page : 3 ; ///< Index into the qTD buffer pointer list - uint32_t int_on_complete : 1 ; ///< Interrupt on complete - volatile uint32_t total_bytes : 15 ; ///< Transfer bytes, decreased during transaction - volatile uint32_t data_toggle : 1 ; ///< Data Toggle bit - - - /// Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address. The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page - uint32_t buffer[5]; +typedef struct { + // Word 0 Next QTD Pointer + ehci_link_t next; + + // Word 1 Alternate Next QTD Pointer (not used) + union { + ehci_link_t alternate; + struct { + uint32_t : 5; + uint32_t used : 1; + uint32_t : 10; + uint32_t expected_bytes : 16; + }; + }; + + // Word 2 qTQ Token + volatile uint32_t ping_err : 1; // For Highspeed: 0 Out, 1 Ping. Full/Slow used as error indicator + volatile uint32_t non_hs_split_state : 1; // Used by HC to track the state of split transaction + volatile uint32_t non_hs_missed_uframe : 1; // HC misses a complete split transaction + volatile uint32_t xact_err : 1; // Error (Timeout, CRC, Bad PID ... ) + volatile uint32_t babble_err : 1; // Babble detected, also set Halted bit to 1 + volatile uint32_t buffer_err : 1; // Data overrun/underrun error + volatile uint32_t halted : 1; // Serious error or STALL received + volatile uint32_t active : 1; // Start transfer, clear by HC when complete + + uint32_t pid : 2; // 0: OUT, 1: IN, 2 Setup + volatile uint32_t err_count : 2; // Error Counter of consecutive errors + volatile uint32_t current_page : 3; // Index into the qTD buffer pointer list + uint32_t int_on_complete : 1; // Interrupt on complete + volatile uint32_t total_bytes : 15; // Transfer bytes, decreased during transaction + volatile uint32_t data_toggle : 1; // Data Toggle bit + + // Buffer Page Pointer List, Each element in the list is a 4K page aligned, physical memory address. + // The lower 12 bits in each pointer are reserved (except for the first one) as each memory pointer must reference the start of a 4K page + uint32_t buffer[5]; } ehci_qtd_t; TU_VERIFY_STATIC( sizeof(ehci_qtd_t) == 32, "size is not correct" ); /// Queue Head -typedef struct TU_ATTR_ALIGNED(32) -{ - // Word 0: Next QHD - ehci_link_t next; - - // Word 1: Endpoint Characteristics - uint32_t dev_addr : 7 ; ///< device address - uint32_t fl_inactive_next_xact : 1 ; ///< Only valid for Periodic with Full/Slow speed - uint32_t ep_number : 4 ; ///< EP number - uint32_t ep_speed : 2 ; ///< 0: Full, 1: Low, 2: High - uint32_t data_toggle_control : 1 ; ///< 0: use DT in qHD, 1: use DT in qTD - uint32_t head_list_flag : 1 ; ///< Head of the queue - uint32_t max_packet_size : 11 ; ///< Max packet size - uint32_t fl_ctrl_ep_flag : 1 ; ///< 1 if is Full/Low speed control endpoint - uint32_t nak_reload : 4 ; ///< Used by HC - - // Word 2: Endpoint Capabilities - uint32_t int_smask : 8 ; ///< Interrupt Schedule Mask - uint32_t fl_int_cmask : 8 ; ///< Split Completion Mask for Full/Slow speed - uint32_t fl_hub_addr : 7 ; ///< Hub Address for Full/Slow speed - uint32_t fl_hub_port : 7 ; ///< Hub Port for Full/Slow speed - uint32_t mult : 2 ; ///< Transaction per micro frame - - // Word 3: Current qTD Pointer - volatile uint32_t qtd_addr; - - // Word 4-11: Transfer Overlay - volatile ehci_qtd_t qtd_overlay; - - //--------------------------------------------------------------------+ +typedef struct TU_ATTR_ALIGNED(32) { + // Word 0 Next QHD + ehci_link_t next; + + // Word 1 Endpoint Characteristics + uint32_t dev_addr : 7; // device address + uint32_t fl_inactive_next_xact : 1; // Only valid for Periodic with Full/Slow speed + uint32_t ep_number : 4; // EP number + uint32_t ep_speed : 2; // Full (0), Low (1), High (2) + uint32_t data_toggle_control : 1; // 0 use DT in qHD, 1 use DT in qTD + uint32_t head_list_flag : 1; // Head of the queue + uint32_t max_packet_size : 11; // Max packet size + uint32_t fl_ctrl_ep_flag : 1; // 1 if is Full/Low speed control endpoint + uint32_t nak_reload : 4; // Used by HC + + // Word 2 Endpoint Capabilities + uint32_t int_smask : 8; // Interrupt Schedule Mask + uint32_t fl_int_cmask : 8; // Split Completion Mask for Full/Slow speed + uint32_t fl_hub_addr : 7; // Hub Address for Full/Slow speed + uint32_t fl_hub_port : 7; // Hub Port for Full/Slow speed + uint32_t mult : 2; // Transaction per micro frame + + // Word 3 Current qTD Pointer + volatile uint32_t qtd_addr; + + // Word 4-11 Transfer Overlay + volatile ehci_qtd_t qtd_overlay; + + //--------------------------------------------------------------------+ /// Due to the fact QHD is 32 bytes aligned but occupies only 48 bytes - /// thus there are 16 bytes padding free that we can make use of. + /// thus there are 16 bytes padding free that we can make use of. //--------------------------------------------------------------------+ - uint8_t used; - uint8_t removing; // removed from asyn list, waiting for async advance - uint8_t pid; - uint8_t interval_ms; // polling interval in frames (or millisecond) + uint8_t used; + uint8_t removing;// removed from asyn list, waiting for async advance + uint8_t pid; + uint8_t interval_ms;// polling interval in frames (or millisecond) - uint8_t TU_RESERVED[4]; + uint8_t TU_RESERVED[4]; // Attached TD management, note usbh will only queue 1 TD per QHD. // buffer for dcache invalidate since td's buffer is modified by HC and finding initial buffer address is not trivial uint32_t attached_buffer; - ehci_qtd_t * volatile attached_qtd; + ehci_qtd_t *volatile attached_qtd; } ehci_qhd_t; - TU_VERIFY_STATIC( sizeof(ehci_qhd_t) == 64, "size is not correct" ); /// Highspeed Isochronous Transfer Descriptor (section 3.3) typedef struct TU_ATTR_ALIGNED(32) { - // Word 0: Next Link Pointer - ehci_link_t next; - - // Word 1-8: iTD Transaction Status and Control List - struct { - // iTD Control - volatile uint32_t offset : 12 ; ///< This field is a value that is an offset, expressed in bytes, from the beginning of a buffer. - volatile uint32_t page_select : 3 ; ///< These bits are set by software to indicate which of the buffer page pointers the offset field in this slot should be concatenated to produce the starting memory address for this transaction. The valid range of values for this field is 0 to 6 - uint32_t int_on_complete : 1 ; ///< If this bit is set to a one, it specifies that when this transaction completes, the Host Controller should issue an interrupt at the next interrupt threshold - volatile uint32_t length : 12 ; ///< For an OUT, this field is the number of data bytes the host controller will send during the transaction. The host controller is not required to update this field to reflect the actual number of bytes transferred during the transfer - ///< For an IN, the initial value of the field is the number of bytes the host expects the endpoint to deliver. During the status update, the host controller writes back the number of bytes successfully received. The value in this register is the actual byte count - // iTD Status - volatile uint32_t error : 1 ; ///< Set to a one by the Host Controller during status update in the case where the host did not receive a valid response from the device (Timeout, CRC, Bad PID, etc.). This bit may only be set for isochronous IN transactions. - volatile uint32_t babble_err : 1 ; ///< Set to a 1 by the Host Controller during status update when a babble is detected during the transaction - volatile uint32_t buffer_err : 1 ; ///< Set to a 1 by the Host Controller during status update to indicate that the Host Controller is unable to keep up with the reception of incoming data (overrun) or is unable to supply data fast enough during transmission (underrun). - volatile uint32_t active : 1 ; ///< Set to 1 by software to enable the execution of an isochronous transaction by the Host Controller - } xact[8]; - - // Word 9-15 Buffer Page Pointer List (Plus) - uint32_t BufferPointer[7]; - -// // FIXME: Store meta data into buffer pointer reserved for saving memory -// /*---------- HCD Area ----------*/ -// uint32_t used; -// uint32_t IhdIdx; -// uint32_t reserved[6]; + // Word 0: Next Link Pointer + ehci_link_t next; + + // Word 1-8: iTD Transaction Status and Control List + struct { + // iTD Control + volatile uint32_t offset : 12; // offset in bytes, from the beginning of a buffer. + volatile uint32_t page_select : 3; // buffer page pointers the offset field in this slot should be concatenated to produce the starting memory address for this transaction. The valid range of values for this field is 0 to 6 + uint32_t int_on_complete : 1; // If this bit is set to a one, it specifies that when this transaction completes, the Host Controller should issue an interrupt at the next interrupt threshold + volatile uint32_t length : 12; // For an OUT, this field is the number of data bytes the host controller will send during the transaction. The host controller is not required to update this field to reflect the actual number of bytes transferred during the transfer + // For an IN, the initial value of the field is the number of bytes the host expects the endpoint to deliver. During the status update, the host controller writes back the number of bytes successfully received. The value in this register is the actual byte count + // iTD Status + volatile uint32_t error : 1; // Set to a one by the Host Controller during status update in the case where the host did not receive a valid response from the device (Timeout, CRC, Bad PID, etc.). This bit may only be set for isochronous IN transactions. + volatile uint32_t babble_err : 1; // Set to a 1 by the Host Controller during status update when a babble is detected during the transaction + volatile uint32_t buffer_err : 1; // Set to a 1 by the Host Controller during status update to indicate that the Host Controller is unable to keep up with the reception of incoming data (overrun) or is unable to supply data fast enough during transmission (underrun). + volatile uint32_t active : 1; // Set to 1 by software to enable the execution of an isochronous transaction by the Host Controller + } xact[8]; + + // Word 9-15 Buffer Page Pointer List (Plus) + uint32_t BufferPointer[7]; + + // FIXME: Store meta data into buffer pointer reserved for saving memory + //---------- HCD Area ---------- + // uint32_t used; + // uint32_t IhdIdx; + // uint32_t reserved[6]; } ehci_itd_t; - TU_VERIFY_STATIC( sizeof(ehci_itd_t) == 64, "size is not correct" ); /// Split (Full-Speed) Isochronous Transfer Descriptor -typedef struct TU_ATTR_ALIGNED(32) -{ +typedef struct TU_ATTR_ALIGNED(32) { // Word 0: Next Link Pointer - ehci_link_t next; - - // Word 1: siTD Endpoint Characteristics - uint32_t dev_addr : 7; ///< This field selects the specific device serving as the data source or sink. - uint32_t : 1; ///< reserved - uint32_t ep_number : 4; ///< This 4-bit field selects the particular endpoint number on the device serving as the data source or sink. - uint32_t : 4; ///< This field is reserved and should be set to zero. - uint32_t hub_addr : 7; ///< This field holds the device address of the transaction translators’ hub. - uint32_t : 1; ///< reserved - uint32_t port_number : 7; ///< This field is the port number of the recipient transaction translator. - uint32_t direction : 1; ///< 0 = OUT; 1 = IN. This field encodes whether the full-speed transaction should be an IN or OUT. - - // Word 2: Micro-frame Schedule Control - uint8_t int_smask ; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute complete-split transactions - uint8_t fl_int_cmask; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute start-split transactions. - uint16_t reserved ; ///< reserved - - // Word 3: siTD Transfer Status and Control - // Status [7:0] TODO identical to qTD Token'status --> refactor later - volatile uint32_t : 1 ; // reserved - volatile uint32_t split_state : 1 ; - volatile uint32_t missed_uframe : 1 ; - volatile uint32_t xact_err : 1 ; - volatile uint32_t babble_err : 1 ; - volatile uint32_t buffer_err : 1 ; - volatile uint32_t error : 1 ; - volatile uint32_t active : 1 ; - // Micro-frame Schedule Control - volatile uint32_t cmask_progress : 8 ; ///< This field is used by the host controller to record which split-completes have been executed. See Section 4.12.3.3.2 for behavioral requirements. - volatile uint32_t total_bytes : 10 ; ///< This field is initialized by software to the total number of bytes expected in this transfer. Maximum value is 1023 - volatile uint32_t : 4 ; ///< reserved - volatile uint32_t page_select : 1 ; ///< Used to indicate which data page pointer should be concatenated with the CurrentOffsetfield to construct a data buffer pointer - uint32_t int_on_complete : 1 ; ///< Do not interrupt when transaction is complete. 1 = Do interrupt when transaction is complete - uint32_t : 0 ; // padding to the end of current storage unit - - /// Word 4-5: Buffer Pointer List - uint32_t buffer[2]; // buffer[1] TP: Transaction Position - T-Count: Transaction Count - - /*---------- Word 6 ----------*/ - ehci_link_t back; - - /// SITD is 32-byte aligned but occupies only 28 --> 4 bytes for storing extra data - uint8_t used; - uint8_t ihd_idx; - uint8_t reserved2[2]; + ehci_link_t next; + + // Word 1: siTD Endpoint Characteristics + uint32_t dev_addr : 7; ///< This field selects the specific device serving as the data source or sink. + uint32_t : 1; ///< reserved + uint32_t ep_number : 4; ///< This 4-bit field selects the particular endpoint number on the device serving as the data source or sink. + uint32_t : 4; ///< This field is reserved and should be set to zero. + uint32_t hub_addr : 7; ///< This field holds the device address of the transaction translators’ hub. + uint32_t : 1; ///< reserved + uint32_t port_number : 7; ///< This field is the port number of the recipient transaction translator. + uint32_t direction : 1; ///< 0 = OUT; 1 = IN. This field encodes whether the full-speed transaction should be an IN or OUT. + + // Word 2: Micro-frame Schedule Control + uint8_t int_smask ; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute complete-split transactions + uint8_t fl_int_cmask; ///< This field (along with the Activeand SplitX-statefields in the Statusbyte) are used to determine during which micro-frames the host controller should execute start-split transactions. + uint16_t reserved ; ///< reserved + + // Word 3: siTD Transfer Status and Control + // Status [7:0] TODO identical to qTD Token'status --> refactor later + volatile uint32_t : 1 ; // reserved + volatile uint32_t split_state : 1 ; + volatile uint32_t missed_uframe : 1 ; + volatile uint32_t xact_err : 1 ; + volatile uint32_t babble_err : 1 ; + volatile uint32_t buffer_err : 1 ; + volatile uint32_t error : 1 ; + volatile uint32_t active : 1 ; + // Micro-frame Schedule Control + volatile uint32_t cmask_progress : 8 ; ///< This field is used by the host controller to record which split-completes have been executed. See Section 4.12.3.3.2 for behavioral requirements. + volatile uint32_t total_bytes : 10 ; ///< This field is initialized by software to the total number of bytes expected in this transfer. Maximum value is 1023 + volatile uint32_t : 4 ; ///< reserved + volatile uint32_t page_select : 1 ; ///< Used to indicate which data page pointer should be concatenated with the CurrentOffsetfield to construct a data buffer pointer + uint32_t int_on_complete : 1 ; ///< Do not interrupt when transaction is complete. 1 = Do interrupt when transaction is complete + uint32_t : 0 ; // padding to the end of current storage unit + + /// Word 4-5: Buffer Pointer List + uint32_t buffer[2]; // buffer[1] TP: Transaction Position - T-Count: Transaction Count + + /*---------- Word 6 ----------*/ + ehci_link_t back; + + /// SITD is 32-byte aligned but occupies only 28 --> 4 bytes for storing extra data + uint8_t used; + uint8_t ihd_idx; + uint8_t reserved2[2]; } ehci_sitd_t; TU_VERIFY_STATIC( sizeof(ehci_sitd_t) == 32, "size is not correct" ); @@ -315,8 +308,7 @@ enum { EHCI_PORTSC_MASK_OVER_CURRENT_CHANGE }; -typedef volatile struct -{ +typedef volatile struct { union { uint32_t command; // 0x00 diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 662bb3a1f..8b89de66c 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -340,8 +340,8 @@ def test_host_device_info(board): ser.close() if len(data) == 0: assert False, 'No data from device' - lines = data.decode('utf-8', errors='ignore').splitlines() + enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -353,7 +353,6 @@ def test_host_device_info(board): failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' print('\n'.join(lines)) assert False, failed_msg - return 0 -- cgit v1.3.1 From e511d00f34b2832ae32ad0b2418a0878c7c4e7d6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Mar 2025 22:11:44 +0700 Subject: added hcd_edpt_close() stub for other ports --- src/portable/mentor/musb/hcd_musb.c | 5 +++ src/portable/nxp/khci/hcd_khci.c | 5 +++ src/portable/ohci/ohci.c | 6 +++- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 6 +++- src/portable/renesas/rusb2/hcd_rusb2.c | 5 +++ src/portable/synopsys/dwc2/hcd_dwc2.c | 5 +++ src/portable/template/hcd_template.c | 49 ++++++++-------------------- 7 files changed, 44 insertions(+), 37 deletions(-) (limited to 'src/portable') diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 1c0740193..811043d74 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -804,6 +804,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; (void) daddr; (void) ep_addr; + return false; // TODO not implemented yet +} + bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { (void)rhport; diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 056dbf40b..c3c901c5d 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -541,6 +541,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; (void) daddr; (void) ep_addr; + return false; // TODO not implemented yet +} + /* The address of buffer must be aligned to 4 byte boundary. And it must be at least 4 bytes long. * DMA writes data in 4 byte unit */ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index ce35eab70..672ad0443 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -451,7 +451,6 @@ static void td_insert_to_ed(ohci_ed_t* p_ed, ohci_gtd_t * p_gtd) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ - bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { (void) rhport; @@ -486,6 +485,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; (void) daddr; (void) ep_addr; + return false; // TODO not implemented yet +} + bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void) rhport; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 478c6e789..cd8c905d5 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -514,7 +514,6 @@ void hcd_int_disable(uint8_t rhport) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ - bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { (void) rhport; @@ -535,6 +534,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; (void) daddr; (void) ep_addr; + return false; // TODO not implemented yet +} + bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { (void) rhport; diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 4c81b05be..3e4b36981 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -718,6 +718,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; (void) daddr; (void) ep_addr; + return false; // TODO not implemented yet +} + bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { bool r; diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index b13479b02..f0cea529e 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -506,6 +506,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t* return true; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; (void) daddr; (void) ep_addr; + return false; // TODO not implemented yet +} + // clean up channel after part of transfer is done but the whole urb is not complete static void channel_xfer_out_wrapup(dwc2_regs_t* dwc2, uint8_t ch_id) { hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index d8bca196f..1202c4ef4 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -36,24 +36,19 @@ // optional hcd configuration, called by tuh_configure() bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { - (void) rhport; - (void) cfg_id; - (void) cfg_param; - + (void) rhport; (void) cfg_id; (void) cfg_param; return false; } // Initialize controller to host mode bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { - (void) rhport; - (void) rh_init; + (void) rhport; (void) rh_init; return false; } // Interrupt Handler void hcd_int_handler(uint8_t rhport, bool in_isr) { - (void) rhport; - (void) in_isr; + (void) rhport; (void) in_isr; } // Enable USB interrupt @@ -69,7 +64,6 @@ void hcd_int_disable(uint8_t rhport) { // Get frame number (1ms) uint32_t hcd_frame_number(uint8_t rhport) { (void) rhport; - return 0; } @@ -80,7 +74,6 @@ uint32_t hcd_frame_number(uint8_t rhport) { // Get the current connect status of roothub port bool hcd_port_connect_status(uint8_t rhport) { (void) rhport; - return false; } @@ -98,14 +91,12 @@ void hcd_port_reset_end(uint8_t rhport) { // Get port link speed tusb_speed_t hcd_port_speed_get(uint8_t rhport) { (void) rhport; - return TUSB_SPEED_FULL; } // HCD closes all opened endpoints belong to this device void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { - (void) rhport; - (void) dev_addr; + (void) rhport; (void) dev_addr; } //--------------------------------------------------------------------+ @@ -114,49 +105,37 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { // Open an endpoint bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { - (void) rhport; - (void) dev_addr; - (void) ep_desc; - + (void) rhport; (void) dev_addr; (void) ep_desc; return false; } +bool hcd_edpt_close(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; (void) daddr; (void) ep_addr; + return false; // TODO not implemented yet +} + // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; - (void) buffer; - (void) buflen; - + (void) rhport; (void) dev_addr; (void) ep_addr; (void) buffer; (void) buflen; return false; } // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; - + (void) rhport; (void) dev_addr; (void) ep_addr; return false; } // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { - (void) rhport; - (void) dev_addr; - (void) setup_packet; - + (void) rhport; (void) dev_addr; (void) setup_packet; return false; } // clear stall, data toggle is also reset to DATA0 bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; - + (void) rhport; (void) dev_addr; (void) ep_addr; return false; } -- cgit v1.3.1 From 4787cd5f546eabad630fc5c22f37f67a076ac37e Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Apr 2025 18:11:33 +0700 Subject: fix(hcd) hcd_edpt_open() return true if endpoint is already opened. --- examples/host/device_info/src/main.c | 31 ++++++++++++++++++++----------- src/host/hcd.h | 1 + src/portable/analog/max3421/hcd_max3421.c | 2 +- src/portable/ehci/ehci.c | 4 +++- 4 files changed, 25 insertions(+), 13 deletions(-) (limited to 'src/portable') diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index ac4c46a11..e924a137b 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -124,13 +124,18 @@ void tuh_mount_cb(uint8_t daddr) { } printf("Device %u: ID %04x:%04x SN ", daddr, desc.device.idVendor, desc.device.idProduct); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, desc.serial, sizeof(desc.serial)); + + xfer_result = XFER_RESULT_FAILED; + if (desc.device.iSerialNumber != 0) { + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, desc.serial, sizeof(desc.serial)); + } if (XFER_RESULT_SUCCESS != xfer_result) { uint16_t* serial = (uint16_t*)(uintptr_t) desc.serial; - serial[0] = 'n'; - serial[1] = '/'; - serial[2] = 'a'; - serial[3] = 0; + serial[0] = (uint16_t) ((TUSB_DESC_STRING << 8) | (2 * 3 + 2)); + serial[1] = 'n'; + serial[2] = '/'; + serial[3] = 'a'; + serial[4] = 0; } print_utf16((uint16_t*)(uintptr_t) desc.serial, sizeof(desc.serial)/2); printf("\r\n"); @@ -150,16 +155,20 @@ void tuh_mount_cb(uint8_t daddr) { // Get String descriptor using Sync API printf(" iManufacturer %u ", desc.device.iManufacturer); - xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + if (desc.device.iManufacturer != 0) { + xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + } } printf("\r\n"); printf(" iProduct %u ", desc.device.iProduct); - xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + if (desc.device.iProduct != 0) { + xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, desc.buf, sizeof(desc.buf)); + if (XFER_RESULT_SUCCESS == xfer_result) { + print_utf16((uint16_t*)(uintptr_t) desc.buf, sizeof(desc.buf)/2); + } } printf("\r\n"); diff --git a/src/host/hcd.h b/src/host/hcd.h index aa9e9cf3b..b20d96d54 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -163,6 +163,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); //--------------------------------------------------------------------+ // Open an endpoint +// return true if successfully opened or endpoint is currently opened bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); // Close an endpoint diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 3fbf950a4..bb33200f2 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -611,7 +611,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * e ep = &_hcd_data.ep[0]; }else { if (NULL != find_ep_not_addr0(daddr, ep_num, ep_dir)) { - return false; // endpoint already opened + return true; // already opened } ep = allocate_ep(); TU_ASSERT(ep); diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 292a352fb..7451f69a3 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -381,7 +381,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const if (ep_desc->bEndpointAddress == 0) { p_qhd = qhd_control(dev_addr); } else { - TU_VERIFY(NULL == qhd_get_from_addr(dev_addr, ep_desc->bEndpointAddress)); // ep not opened yet + if (NULL != qhd_get_from_addr(dev_addr, ep_desc->bEndpointAddress)) { + return true; // already opened + } p_qhd = qhd_find_free(); } TU_ASSERT(p_qhd); -- cgit v1.3.1 From 255ccf26ea29eb16be41f7715426c10be69b6e30 Mon Sep 17 00:00:00 2001 From: Maxime Vincent Date: Fri, 4 Apr 2025 14:21:20 +0200 Subject: dwc2/host: clear SOF flag in handle_sof_irq() --- src/portable/synopsys/dwc2/hcd_dwc2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index f0cea529e..7cbef05b7 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -1182,6 +1182,7 @@ static void handle_channel_irq(uint8_t rhport, bool in_isr) { static bool handle_sof_irq(uint8_t rhport, bool in_isr) { (void) in_isr; dwc2_regs_t* dwc2 = DWC2_REG(rhport); + dwc2->gintsts = GINTSTS_SOF; // Clear the SOF interrupt flag bool more_isr = false; -- cgit v1.3.1 From 7d8433abab25734981f1b5eab3c5724a945df711 Mon Sep 17 00:00:00 2001 From: Maxime Vincent Date: Mon, 7 Apr 2025 11:36:02 +0200 Subject: dwc2/host: enable disconnect interrupt + handle it Signed-off-by: Maxime Vincent --- src/portable/synopsys/dwc2/hcd_dwc2.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 7cbef05b7..4c3d23b65 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -381,7 +381,7 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2->hprt = HPRT_POWER; // turn on VBUS // Enable required interrupts - dwc2->gintmsk |= GINTSTS_OTGINT | GINTSTS_CONIDSTSCHNG | GINTSTS_HPRTINT | GINTSTS_HCINT; + dwc2->gintmsk |= GINTSTS_OTGINT | GINTSTS_CONIDSTSCHNG | GINTSTS_HPRTINT | GINTSTS_HCINT | GINTSTS_DISCINT; // NPTX can hold at least 2 packet, change interrupt level to half-empty uint32_t gahbcfg = dwc2->gahbcfg & ~GAHBCFG_TX_FIFO_EPMTY_LVL; @@ -1330,6 +1330,14 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { handle_channel_irq(rhport, in_isr); } + if (gintsts & GINTSTS_DISCINT) { + // Device disconnected + dwc2->gintsts = GINTSTS_DISCINT; + if (!(dwc2->hprt & HPRT_CONN_STATUS)) { + hcd_event_device_remove(rhport, in_isr); + } + } + #if CFG_TUH_DWC2_SLAVE_ENABLE // RxFIFO non-empty interrupt handling if (gintsts & GINTSTS_RXFLVL) { -- cgit v1.3.1 From 6607b76c761a3a64a7c43ceba27ae42cdb368e52 Mon Sep 17 00:00:00 2001 From: Maxime Vincent Date: Tue, 8 Apr 2025 14:34:11 +0200 Subject: dwc2/host: remove hcd_event_device_remove() call from handle_hptr_irq to prevent double removal Signed-off-by: Maxime Vincent --- src/portable/synopsys/dwc2/hcd_dwc2.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 4c3d23b65..4aa42759f 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -1266,8 +1266,6 @@ static void handle_hprt_irq(uint8_t rhport, bool in_isr) { if (hprt_bm.conn_status) { hcd_event_device_attach(rhport, in_isr); - } else { - hcd_event_device_remove(rhport, in_isr); } } -- cgit v1.3.1 From 084c0802c310c836e0c3e972b724a5a0d17057ba Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 9 Apr 2025 01:31:16 +0200 Subject: dwc2: refactor bitfields. Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/dcd_dwc2.c | 86 ++- src/portable/synopsys/dwc2/dwc2_common.c | 16 +- src/portable/synopsys/dwc2/dwc2_type.h | 953 +++++++++++++++---------------- src/portable/synopsys/dwc2/hcd_dwc2.c | 202 ++++--- 4 files changed, 647 insertions(+), 610 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index c461d9a79..83ebc18cb 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -44,7 +44,7 @@ #if TU_CHECK_MCU(OPT_MCU_GD32VF103) #define DWC2_EP_COUNT(_dwc2) DWC2_EP_MAX #else - #define DWC2_EP_COUNT(_dwc2) ((_dwc2)->ghwcfg2_bm.num_dev_ep + 1) + #define DWC2_EP_COUNT(_dwc2) ({const dwc2_ghwcfg2_t ghwcfg2 = {.value = (_dwc2)->ghwcfg2}; ghwcfg2.num_dev_ep + 1;}) #endif //--------------------------------------------------------------------+ @@ -102,7 +102,8 @@ bool dcd_dcache_clean_invalidate(const void* addr, uint32_t data_size) { TU_ATTR_ALWAYS_INLINE static inline bool dma_device_enabled(const dwc2_regs_t* dwc2) { (void) dwc2; // Internal DMA only - return CFG_TUD_DWC2_DMA_ENABLE && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + return CFG_TUD_DWC2_DMA_ENABLE && ghwcfg2.arch == GHWCFG2_ARCH_INTERNAL_DMA; } static void dma_setup_prepare(uint8_t rhport) { @@ -250,20 +251,15 @@ static void edpt_activate(uint8_t rhport, const tusb_desc_endpoint_t* p_endpoint xfer->interval = p_endpoint_desc->bInterval; // Endpoint control - union { - uint32_t value; - dwc2_depctl_t bm; - } depctl; - depctl.value = 0; - - depctl.bm.mps = xfer->max_size; - depctl.bm.active = 1; - depctl.bm.type = p_endpoint_desc->bmAttributes.xfer; + dwc2_depctl_t depctl = {.value = 0}; + depctl.mps = xfer->max_size; + depctl.active = 1; + depctl.type = p_endpoint_desc->bmAttributes.xfer; if (p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS) { - depctl.bm.set_data0_iso_even = 1; + depctl.set_data0_iso_even = 1; } if (dir == TUSB_DIR_IN) { - depctl.bm.tx_fifo_num = epnum; + depctl.tx_fifo_num = epnum; } dwc2_dep_t* dep = &dwc2->ep[dir == TUSB_DIR_IN ? 0 : 1][epnum]; @@ -343,31 +339,22 @@ static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uin } // transfer size: A full OUT transfer (multiple packets, possibly) triggers XFRC. - union { - uint32_t value; - dwc2_ep_tsize_t bm; - } deptsiz; - deptsiz.value = 0; - deptsiz.bm.xfer_size = total_bytes; - deptsiz.bm.packet_count = num_packets; - + dwc2_ep_tsize_t deptsiz = {.value = 0}; + deptsiz.xfer_size = total_bytes; + deptsiz.packet_count = num_packets; dep->tsiz = deptsiz.value; // control - union { - dwc2_depctl_t bm; - uint32_t value; - } depctl; - depctl.value = dep->ctl; - - depctl.bm.clear_nak = 1; - depctl.bm.enable = 1; - if (depctl.bm.type == DEPCTL_EPTYPE_ISOCHRONOUS && xfer->interval == 1) { - const uint32_t odd_now = (dwc2->dsts_bm.frame_number & 1u); + dwc2_depctl_t depctl = {.value = dep->ctl}; + depctl.clear_nak = 1; + depctl.enable = 1; + if (depctl.type == DEPCTL_EPTYPE_ISOCHRONOUS && xfer->interval == 1) { + const dwc2_dsts_t dsts = {.value = dwc2->dsts}; + const uint32_t odd_now = dsts.frame_number & 1u; if (odd_now) { - depctl.bm.set_data0_iso_even = 1; + depctl.set_data0_iso_even = 1; } else { - depctl.bm.set_data1_iso_odd = 1; + depctl.set_data1_iso_odd = 1; } } @@ -410,7 +397,8 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // XCVRDLY: transceiver delay between xcvr_sel and txvalid during device chirp is required // when using with some PHYs such as USB334x (USB3341, USB3343, USB3346, USB3347) - if (dwc2->ghwcfg2_bm.hs_phy_type == GHWCFG2_HSPHY_ULPI) { + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + if (ghwcfg2.hs_phy_type == GHWCFG2_HSPHY_ULPI) { dcfg |= DCFG_XCVRDLY; } } else { @@ -671,7 +659,9 @@ static void handle_bus_reset(uint8_t rhport) { dfifo_device_init(rhport); // 5. Reset device address - dwc2->dcfg_bm.address = 0; + dwc2_dcfg_t dcfg = {.value = dwc2->dcfg}; + dcfg.address = 0; + dwc2->dcfg = dcfg.value; // Fixed both control EP0 size to 64 bytes dwc2->epin[0].ctl &= ~(0x03 << DIEPCTL_MPSIZ_Pos); @@ -691,8 +681,9 @@ static void handle_bus_reset(uint8_t rhport) { static void handle_enum_done(uint8_t rhport) { dwc2_regs_t *dwc2 = DWC2_REG(rhport); + const dwc2_dsts_t dsts = {.value = dwc2->dsts}; tusb_speed_t speed; - switch (dwc2->dsts_bm.enum_speed) { + switch (dsts.enum_speed) { case DCFG_SPEED_HIGH: speed = TUSB_SPEED_HIGH; break; @@ -737,12 +728,12 @@ static void handle_rxflvl_irq(uint8_t rhport) { const volatile uint32_t* rx_fifo = dwc2->fifo[0]; // Pop control word off FIFO - const dwc2_grxstsp_t grxstsp_bm = dwc2->grxstsp_bm; - const uint8_t epnum = grxstsp_bm.ep_ch_num; + const dwc2_grxstsp_t grxstsp = {.value = dwc2->grxstsp}; + const uint8_t epnum = grxstsp.ep_ch_num; dwc2_dep_t* epout = &dwc2->epout[epnum]; - switch (grxstsp_bm.packet_status) { + switch (grxstsp.packet_status) { case GRXSTS_PKTSTS_GLOBAL_OUT_NAK: // Global OUT NAK: do nothing break; @@ -764,7 +755,7 @@ static void handle_rxflvl_irq(uint8_t rhport) { case GRXSTS_PKTSTS_RX_DATA: { // Out packet received - const uint16_t byte_count = grxstsp_bm.byte_count; + const uint16_t byte_count = grxstsp.byte_count; xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); if (byte_count) { @@ -778,7 +769,8 @@ static void handle_rxflvl_irq(uint8_t rhport) { // short packet, minus remaining bytes (xfer_size) if (byte_count < xfer->max_size) { - xfer->total_len -= epout->tsiz_bm.xfer_size; + const dwc2_ep_tsize_t tsiz = {.value = epout->tsiz}; + xfer->total_len -= tsiz.xfer_size; if (epnum == 0) { xfer->total_len -= _dcd_data.ep0_pending[TUSB_DIR_OUT]; _dcd_data.ep0_pending[TUSB_DIR_OUT] = 0; @@ -840,11 +832,13 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep // - 64 bytes or // - Half/Empty of TX FIFO size (configured by GAHBCFG.TXFELVL) if (diepint_bm.txfifo_empty && (dwc2->diepempmsk & (1 << epnum))) { - const uint16_t remain_packets = epin->tsiz_bm.packet_count; + dwc2_ep_tsize_t tsiz = {.value = epin->tsiz}; + const uint16_t remain_packets = tsiz.packet_count; // Process every single packet (only whole packets can be written to fifo) for (uint16_t i = 0; i < remain_packets; i++) { - const uint16_t remain_bytes = (uint16_t) epin->tsiz_bm.xfer_size; + tsiz.value = epin->tsiz; + const uint16_t remain_bytes = (uint16_t) tsiz.xfer_size; const uint16_t xact_bytes = tu_min16(remain_bytes, xfer->max_size); // Check if dtxfsts has enough space available @@ -863,7 +857,8 @@ static void handle_epin_slave(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diep } // Turn off TXFE if all bytes are written. - if (epin->tsiz_bm.xfer_size == 0) { + tsiz.value = epin->tsiz; + if (tsiz.xfer_size == 0) { dwc2->diepempmsk &= ~(1 << epnum); } } @@ -894,7 +889,8 @@ static void handle_epout_dma(uint8_t rhport, uint8_t epnum, dwc2_doepint_t doepi xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT); // determine actual received bytes - const uint16_t remain = epout->tsiz_bm.xfer_size; + const dwc2_ep_tsize_t tsiz = {.value = epout->tsiz}; + const uint16_t remain = tsiz.xfer_size; xfer->total_len -= remain; // this is ZLP, so prepare EP0 for next setup diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index f80ae9acb..989a833ff 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -88,11 +88,13 @@ static void phy_fs_init(dwc2_regs_t* dwc2) { static void phy_hs_init(dwc2_regs_t* dwc2) { uint32_t gusbcfg = dwc2->gusbcfg; + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + const dwc2_ghwcfg4_t ghwcfg4 = {.value = dwc2->ghwcfg4}; // De-select FS PHY gusbcfg &= ~GUSBCFG_PHYSEL; - if (dwc2->ghwcfg2_bm.hs_phy_type == GHWCFG2_HSPHY_ULPI) { + if (ghwcfg2.hs_phy_type == GHWCFG2_HSPHY_ULPI) { TU_LOG(DWC2_COMMON_DEBUG, "Highspeed ULPI PHY init\r\n"); // Select ULPI PHY (external) @@ -116,7 +118,7 @@ static void phy_hs_init(dwc2_regs_t* dwc2) { gusbcfg &= ~GUSBCFG_ULPI_UTMI_SEL; // Set 16-bit interface if supported - if (dwc2->ghwcfg4_bm.phy_data_width) { + if (ghwcfg4.phy_data_width) { gusbcfg |= GUSBCFG_PHYIF16; // 16 bit } else { gusbcfg &= ~GUSBCFG_PHYIF16; // 8 bit @@ -127,7 +129,7 @@ static void phy_hs_init(dwc2_regs_t* dwc2) { dwc2->gusbcfg = gusbcfg; // mcu specific phy init - dwc2_phy_init(dwc2, dwc2->ghwcfg2_bm.hs_phy_type); + dwc2_phy_init(dwc2, ghwcfg2.hs_phy_type); // Reset core after selecting PHY reset_core(dwc2); @@ -136,11 +138,11 @@ static void phy_hs_init(dwc2_regs_t* dwc2) { // - 9 if using 8-bit PHY interface // - 5 if using 16-bit PHY interface gusbcfg &= ~GUSBCFG_TRDT_Msk; - gusbcfg |= (dwc2->ghwcfg4_bm.phy_data_width ? 5u : 9u) << GUSBCFG_TRDT_Pos; + gusbcfg |= (ghwcfg4.phy_data_width ? 5u : 9u) << GUSBCFG_TRDT_Pos; dwc2->gusbcfg = gusbcfg; // MCU specific PHY update post reset - dwc2_phy_update(dwc2, dwc2->ghwcfg2_bm.hs_phy_type); + dwc2_phy_update(dwc2, ghwcfg2.hs_phy_type); } static bool check_dwc2(dwc2_regs_t* dwc2) { @@ -171,7 +173,7 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { //-------------------------------------------------------------------- bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role) { (void)dwc2; - + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; #if CFG_TUD_ENABLED if (role == TUSB_ROLE_DEVICE && !TUD_OPT_HIGH_SPEED) { return false; @@ -183,7 +185,7 @@ bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role) { } #endif - return dwc2->ghwcfg2_bm.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED; + return ghwcfg2.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED; } /* dwc2 has several PHYs option diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 812096759..5ecf9d487 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -184,415 +184,470 @@ enum { //-------------------------------------------------------------------- // Common Register Bitfield //-------------------------------------------------------------------- -typedef struct TU_ATTR_PACKED { - uint32_t ses_req_scs : 1; // 0 Session request success - uint32_t ses_req : 1; // 1 Session request - uint32_t vbval_ov_en : 1; // 2 VBUS valid override enable - uint32_t vbval_ov_val : 1; // 3 VBUS valid override value - uint32_t aval_ov_en : 1; // 4 A-peripheral session valid override enable - uint32_t aval_ov_al : 1; // 5 A-peripheral session valid override value - uint32_t bval_ov_en : 1; // 6 B-peripheral session valid override enable - uint32_t bval_ov_val : 1; // 7 B-peripheral session valid override value - uint32_t hng_scs : 1; // 8 Host negotiation success - uint32_t hnp_rq : 1; // 9 HNP (host negotiation protocol) request - uint32_t host_set_hnp_en : 1; // 10 Host set HNP enable - uint32_t dev_hnp_en : 1; // 11 Device HNP enabled - uint32_t embedded_host_en : 1; // 12 Embedded host enable - uint32_t rsv13_14 : 2; // 13.14 Reserved - uint32_t dbnc_filter_bypass : 1; // 15 Debounce filter bypass - uint32_t cid_status : 1; // 16 Connector ID status - uint32_t dbnc_done : 1; // 17 Debounce done - uint32_t ases_valid : 1; // 18 A-session valid - uint32_t bses_valid : 1; // 19 B-session valid - uint32_t otg_ver : 1; // 20 OTG version 0: v1.3, 1: v2.0 - uint32_t current_mode : 1; // 21 Current mode of operation. Only from v3.00a - uint32_t mult_val_id_bc : 5; // 22..26 Multi-valued input pin ID battery charger - uint32_t chirp_en : 1; // 27 Chirp detection enable - uint32_t rsv28_30 : 3; // 28.30: Reserved - uint32_t test_mode_corr_eusb2 : 1; // 31 Test mode control for eUSB2 PHY +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t ses_req_scs : 1; // 0 Session request success + uint32_t ses_req : 1; // 1 Session request + uint32_t vbval_ov_en : 1; // 2 VBUS valid override enable + uint32_t vbval_ov_val : 1; // 3 VBUS valid override value + uint32_t aval_ov_en : 1; // 4 A-peripheral session valid override enable + uint32_t aval_ov_al : 1; // 5 A-peripheral session valid override value + uint32_t bval_ov_en : 1; // 6 B-peripheral session valid override enable + uint32_t bval_ov_val : 1; // 7 B-peripheral session valid override value + uint32_t hng_scs : 1; // 8 Host negotiation success + uint32_t hnp_rq : 1; // 9 HNP (host negotiation protocol) request + uint32_t host_set_hnp_en : 1; // 10 Host set HNP enable + uint32_t dev_hnp_en : 1; // 11 Device HNP enabled + uint32_t embedded_host_en : 1; // 12 Embedded host enable + uint32_t rsv13_14 : 2; // 13.14 Reserved + uint32_t dbnc_filter_bypass : 1; // 15 Debounce filter bypass + uint32_t cid_status : 1; // 16 Connector ID status + uint32_t dbnc_done : 1; // 17 Debounce done + uint32_t ases_valid : 1; // 18 A-session valid + uint32_t bses_valid : 1; // 19 B-session valid + uint32_t otg_ver : 1; // 20 OTG version 0: v1.3, 1: v2.0 + uint32_t current_mode : 1; // 21 Current mode of operation. Only from v3.00a + uint32_t mult_val_id_bc : 5; // 22..26 Multi-valued input pin ID battery charger + uint32_t chirp_en : 1; // 27 Chirp detection enable + uint32_t rsv28_30 : 3; // 28.30: Reserved + uint32_t test_mode_corr_eusb2 : 1; // 31 Test mode control for eUSB2 PHY + }; } dwc2_gotgctl_t; TU_VERIFY_STATIC(sizeof(dwc2_gotgctl_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t rsv0_1 : 2; // 0..1 Reserved - uint32_t ses_end_det : 1; // 2 Session end detected - uint32_t rsv3_7 : 5; // 3..7 Reserved - uint32_t srs_status_change : 1; // 8 Session request success status change - uint32_t hns_status_change : 1; // 9 Host negotiation success status change - uint32_t rsv10_16 : 7; // 10..16 Reserved - uint32_t hng_det : 1; // 17 Host negotiation detected - uint32_t adev_timeout_change : 1; // 18 A-device timeout change - uint32_t dbnc_done : 1; // 19 Debounce done - uint32_t mult_val_lp_change : 1; // 20 Multi-valued input pin change - uint32_t rsv21_31 :11; // 21..31 Reserved +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t rsv0_1 : 2; // 0..1 Reserved + uint32_t ses_end_det : 1; // 2 Session end detected + uint32_t rsv3_7 : 5; // 3..7 Reserved + uint32_t srs_status_change : 1; // 8 Session request success status change + uint32_t hns_status_change : 1; // 9 Host negotiation success status change + uint32_t rsv10_16 : 7; // 10..16 Reserved + uint32_t hng_det : 1; // 17 Host negotiation detected + uint32_t adev_timeout_change : 1; // 18 A-device timeout change + uint32_t dbnc_done : 1; // 19 Debounce done + uint32_t mult_val_lp_change : 1; // 20 Multi-valued input pin change + uint32_t rsv21_31 :11; // 21..31 Reserved + }; } dwc2_gotgint_t; TU_VERIFY_STATIC(sizeof(dwc2_gotgint_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t gintmask : 1; // 0 Global interrupt mask - uint32_t hbst_len : 4; // 1..4 Burst length/type - uint32_t dma_en : 1; // 5 DMA enable - uint32_t rsv6 : 1; // 6 Reserved - uint32_t nptxf_empty_lvl : 1; // 7 Non-periodic Tx FIFO empty level - uint32_t ptxf_empty_lvl : 1; // 8 Periodic Tx FIFO empty level - uint32_t rsv9_20 : 12; // 9.20: Reserved - uint32_t remote_mem_support : 1; // 21 Remote memory support - uint32_t notify_all_dma_write : 1; // 22 Notify all DMA writes - uint32_t ahb_single : 1; // 23 AHB single - uint32_t inv_desc_endian : 1; // 24 Inverse descriptor endian - uint32_t rsv25_31 : 7; // 25..31 Reserved +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t gintmask : 1; // 0 Global interrupt mask + uint32_t hbst_len : 4; // 1..4 Burst length/type + uint32_t dma_en : 1; // 5 DMA enable + uint32_t rsv6 : 1; // 6 Reserved + uint32_t nptxf_empty_lvl : 1; // 7 Non-periodic Tx FIFO empty level + uint32_t ptxf_empty_lvl : 1; // 8 Periodic Tx FIFO empty level + uint32_t rsv9_20 : 12; // 9.20: Reserved + uint32_t remote_mem_support : 1; // 21 Remote memory support + uint32_t notify_all_dma_write : 1; // 22 Notify all DMA writes + uint32_t ahb_single : 1; // 23 AHB single + uint32_t inv_desc_endian : 1; // 24 Inverse descriptor endian + uint32_t rsv25_31 : 7; // 25..31 Reserved + }; } dwc2_gahbcfg_t; TU_VERIFY_STATIC(sizeof(dwc2_gahbcfg_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t timeout_cal : 3; /* 0..2 Timeout calibration. - The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times. The USB standard - timeout value for full- speed operation is 16 to 18 (inclusive) bit times. The application must program this field - based on the speed of enumeration. The number of bit times added per PHY clock are as follows: - - High-speed: PHY clock One 30-MHz = 16 bit times, One 60-MHz = 8 bit times - - Full-speed: PHY clock One 30-MHz = 0.4 bit times, One 60-MHz = 0.2 bit times, One 48-MHz = 0.25 bit times */ - uint32_t phy_if16 : 1; // 3 PHY interface. 0: 8 bits, 1: 16 bits - uint32_t ulpi_utmi_sel : 1; // 4 ULPI/UTMI select. 0: UTMI+, 1: ULPI - uint32_t fs_intf_sel : 1; // 5 Fullspeed serial interface select. 0: 6-pin, 1: 3-pin - uint32_t phy_sel : 1; // 6 HS/FS PHY selection. 0: HS UTMI+ or ULPI, 1: FS serial transceiver - uint32_t ddr_sel : 1; // 7 ULPI DDR select. 0: Single data rate 8-bit, 1: Double data rate 4-bit - uint32_t srp_capable : 1; // 8 SRP-capable - uint32_t hnp_capable : 1; // 9 HNP-capable - uint32_t turnaround_time : 4; // 10..13 Turnaround time. 9: 8-bit UTMI+, 5: 16-bit UTMI+ - uint32_t rsv14 : 1; // 14 Reserved - uint32_t phy_low_power_clk_sel : 1; /* 15 PHY low-power clock select either 480-MHz or 48-MHz (low-power) PHY mode. - In FS/LS modes, the PHY can usually operate on a 48-MHz clock to save power. This bit is valid only for UTMI+ PHYs. - - 0: 480 Mhz internal PLL: the UTMI interface operates at either 60 MHz (8 bit) or 30 MHz (16-bit) - - 1 48 Mhz external clock: the UTMI interface operates at 48 MHz in FS mode and at either 48 or 6 MHz in LS mode */ - uint32_t otg_i2c_sel : 1; // 16 OTG I2C interface select. 0: UTMI-FS, 1: I2C for OTG signals - uint32_t ulpi_fsls : 1; /* 17 ULPI FS/LS select. 0: ULPI, 1: ULPI FS/LS. - valid only when the FS serial transceiver is selected on the ULPI PHY. */ - uint32_t ulpi_auto_resume : 1; // 18 ULPI Auto-resume - uint32_t ulpi_clk_sus_m : 1; // 19 ULPI Clock SuspendM - uint32_t ulpi_ext_vbus_drv : 1; // 20 ULPI External VBUS Drive - uint32_t ulpi_int_vbus_indicator : 1; // 21 ULPI Internal VBUS Indicator - uint32_t term_sel_dl_pulse : 1; // 22 TermSel DLine pulsing - uint32_t indicator_complement : 1; // 23 Indicator complement - uint32_t indicator_pass_through : 1; // 24 Indicator pass through - uint32_t ulpi_if_protect_disable : 1; // 25 ULPI interface protect disable - uint32_t ic_usb_capable : 1; // 26 IC_USB Capable - uint32_t ic_usb_traf_ctl : 1; // 27 IC_USB Traffic Control - uint32_t tx_end_delay : 1; // 28 TX end delay - uint32_t force_host_mode : 1; // 29 Force host mode - uint32_t force_dev_mode : 1; // 30 Force device mode - uint32_t corrupt_tx_pkt : 1; // 31 Corrupt Tx packet. 0: normal, 1: debug +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t timeout_cal : 3; /* 0..2 Timeout calibration. + The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit times. The USB standard + timeout value for full- speed operation is 16 to 18 (inclusive) bit times. The application must program this field + based on the speed of enumeration. The number of bit times added per PHY clock are as follows: + - High-speed: PHY clock One 30-MHz = 16 bit times, One 60-MHz = 8 bit times + - Full-speed: PHY clock One 30-MHz = 0.4 bit times, One 60-MHz = 0.2 bit times, One 48-MHz = 0.25 bit times */ + uint32_t phy_if16 : 1; // 3 PHY interface. 0: 8 bits, 1: 16 bits + uint32_t ulpi_utmi_sel : 1; // 4 ULPI/UTMI select. 0: UTMI+, 1: ULPI + uint32_t fs_intf_sel : 1; // 5 Fullspeed serial interface select. 0: 6-pin, 1: 3-pin + uint32_t phy_sel : 1; // 6 HS/FS PHY selection. 0: HS UTMI+ or ULPI, 1: FS serial transceiver + uint32_t ddr_sel : 1; // 7 ULPI DDR select. 0: Single data rate 8-bit, 1: Double data rate 4-bit + uint32_t srp_capable : 1; // 8 SRP-capable + uint32_t hnp_capable : 1; // 9 HNP-capable + uint32_t turnaround_time : 4; // 10..13 Turnaround time. 9: 8-bit UTMI+, 5: 16-bit UTMI+ + uint32_t rsv14 : 1; // 14 Reserved + uint32_t phy_low_power_clk_sel : 1; /* 15 PHY low-power clock select either 480-MHz or 48-MHz (low-power) PHY mode. + In FS/LS modes, the PHY can usually operate on a 48-MHz clock to save power. This bit is valid only for UTMI+ PHYs. + - 0: 480 Mhz internal PLL: the UTMI interface operates at either 60 MHz (8 bit) or 30 MHz (16-bit) + - 1 48 Mhz external clock: the UTMI interface operates at 48 MHz in FS mode and at either 48 or 6 MHz in LS mode */ + uint32_t otg_i2c_sel : 1; // 16 OTG I2C interface select. 0: UTMI-FS, 1: I2C for OTG signals + uint32_t ulpi_fsls : 1; /* 17 ULPI FS/LS select. 0: ULPI, 1: ULPI FS/LS. + valid only when the FS serial transceiver is selected on the ULPI PHY. */ + uint32_t ulpi_auto_resume : 1; // 18 ULPI Auto-resume + uint32_t ulpi_clk_sus_m : 1; // 19 ULPI Clock SuspendM + uint32_t ulpi_ext_vbus_drv : 1; // 20 ULPI External VBUS Drive + uint32_t ulpi_int_vbus_indicator : 1; // 21 ULPI Internal VBUS Indicator + uint32_t term_sel_dl_pulse : 1; // 22 TermSel DLine pulsing + uint32_t indicator_complement : 1; // 23 Indicator complement + uint32_t indicator_pass_through : 1; // 24 Indicator pass through + uint32_t ulpi_if_protect_disable : 1; // 25 ULPI interface protect disable + uint32_t ic_usb_capable : 1; // 26 IC_USB Capable + uint32_t ic_usb_traf_ctl : 1; // 27 IC_USB Traffic Control + uint32_t tx_end_delay : 1; // 28 TX end delay + uint32_t force_host_mode : 1; // 29 Force host mode + uint32_t force_dev_mode : 1; // 30 Force device mode + uint32_t corrupt_tx_pkt : 1; // 31 Corrupt Tx packet. 0: normal, 1: debug + }; } dwc2_gusbcfg_t; TU_VERIFY_STATIC(sizeof(dwc2_gusbcfg_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t core_soft_rst : 1; // 0 Core Soft Reset - uint32_t piufs_soft_rst : 1; // 1 PIU FS Dedicated Controller Soft Reset - uint32_t frame_counter_rst : 1; // 2 Frame Counter Reset (host) - uint32_t intoken_q_flush : 1; // 3 IN Token Queue Flush - uint32_t rx_fifo_flush : 1; // 4 RX FIFO Flush - uint32_t tx_fifo_flush : 1; // 5 TX FIFO Flush - uint32_t tx_fifo_num : 5; // 6..10 TX FIFO Number - uint32_t rsv11_28 :18; // 11..28 Reserved - uint32_t core_soft_rst_done : 1; // 29 Core Soft Reset Done, from v4.20a - uint32_t dma_req : 1; // 30 DMA Request - uint32_t ahb_idle : 1; // 31 AHB Idle +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t core_soft_rst : 1; // 0 Core Soft Reset + uint32_t piufs_soft_rst : 1; // 1 PIU FS Dedicated Controller Soft Reset + uint32_t frame_counter_rst : 1; // 2 Frame Counter Reset (host) + uint32_t intoken_q_flush : 1; // 3 IN Token Queue Flush + uint32_t rx_fifo_flush : 1; // 4 RX FIFO Flush + uint32_t tx_fifo_flush : 1; // 5 TX FIFO Flush + uint32_t tx_fifo_num : 5; // 6..10 TX FIFO Number + uint32_t rsv11_28 :18; // 11..28 Reserved + uint32_t core_soft_rst_done : 1; // 29 Core Soft Reset Done, from v4.20a + uint32_t dma_req : 1; // 30 DMA Request + uint32_t ahb_idle : 1; // 31 AHB Idle + }; } dwc2_grstctl_t; TU_VERIFY_STATIC(sizeof(dwc2_grstctl_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t ep_ch_num : 4; // 0..3 Endpoint/Channel Number - uint32_t byte_count :11; // 4..14 Byte Count - uint32_t dpid : 2; // 15..16 Data PID - uint32_t packet_status : 4; // 17..20 Packet Status - uint32_t frame_number : 4; // 21..24 Frame Number - uint32_t rsv25_31 : 7; // 25..31 Reserved +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t ep_ch_num : 4; // 0..3 Endpoint/Channel Number + uint32_t byte_count :11; // 4..14 Byte Count + uint32_t dpid : 2; // 15..16 Data PID + uint32_t packet_status : 4; // 17..20 Packet Status + uint32_t frame_number : 4; // 21..24 Frame Number + uint32_t rsv25_31 : 7; // 25..31 Reserved + }; } dwc2_grxstsp_t; TU_VERIFY_STATIC(sizeof(dwc2_grxstsp_t) == 4, "incorrect size"); -// Hardware Configuration -typedef struct TU_ATTR_PACKED { - uint32_t op_mode : 3; // 0..2 HNP/SRP Host/Device/OTG mode - uint32_t arch : 2; // 3..4 Slave/External/Internal DMA - uint32_t single_point : 1; // 5 0: support hub and split | 1: no hub, no split - uint32_t hs_phy_type : 2; // 6..7 0: not supported | 1: UTMI+ | 2: ULPI | 3: UTMI+ and ULPI - uint32_t fs_phy_type : 2; // 8..9 0: not supported | 1: dedicated | 2: UTMI+ | 3: ULPI - uint32_t num_dev_ep : 4; // 10..13 Number of device endpoints (excluding EP0) - uint32_t num_host_ch : 4; // 14..17 Number of host channel (excluding control) - uint32_t period_channel_support : 1; // 18 Support Periodic OUT Host Channel - uint32_t enable_dynamic_fifo : 1; // 19 Dynamic FIFO Sizing Enabled - uint32_t mul_proc_intrpt : 1; // 20 Multi-Processor Interrupt enabled (OTG_MULTI_PROC_INTRPT) - uint32_t reserved21 : 1; // 21 reserved - uint32_t nptx_q_depth : 2; // 22..23 Non-periodic request queue depth: 0 = 2. 1 = 4, 2 = 8 - uint32_t ptx_q_depth : 2; // 24..25 Host periodic request queue depth: 0 = 2. 1 = 4, 2 = 8 - uint32_t token_q_depth : 5; // 26..30 Device IN token sequence learning queue depth: 0-30 - uint32_t otg_enable_ic_usb : 1; // 31 IC_USB mode specified for mode of operation +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t op_mode : 3; // 0..2 HNP/SRP Host/Device/OTG mode + uint32_t arch : 2; // 3..4 Slave/External/Internal DMA + uint32_t single_point : 1; // 5 0: support hub and split | 1: no hub, no split + uint32_t hs_phy_type : 2; // 6..7 0: not supported | 1: UTMI+ | 2: ULPI | 3: UTMI+ and ULPI + uint32_t fs_phy_type : 2; // 8..9 0: not supported | 1: dedicated | 2: UTMI+ | 3: ULPI + uint32_t num_dev_ep : 4; // 10..13 Number of device endpoints (excluding EP0) + uint32_t num_host_ch : 4; // 14..17 Number of host channel (excluding control) + uint32_t period_channel_support : 1; // 18 Support Periodic OUT Host Channel + uint32_t enable_dynamic_fifo : 1; // 19 Dynamic FIFO Sizing Enabled + uint32_t mul_proc_intrpt : 1; // 20 Multi-Processor Interrupt enabled (OTG_MULTI_PROC_INTRPT) + uint32_t reserved21 : 1; // 21 reserved + uint32_t nptx_q_depth : 2; // 22..23 Non-periodic request queue depth: 0 = 2. 1 = 4, 2 = 8 + uint32_t ptx_q_depth : 2; // 24..25 Host periodic request queue depth: 0 = 2. 1 = 4, 2 = 8 + uint32_t token_q_depth : 5; // 26..30 Device IN token sequence learning queue depth: 0-30 + uint32_t otg_enable_ic_usb : 1; // 31 IC_USB mode specified for mode of operation + }; } dwc2_ghwcfg2_t; TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg2_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t xfer_size_width : 4; // 0..3 Transfer size counter in bits = 11 + n (max 19 bits) - uint32_t packet_size_width : 3; // 4..6 Packet size counter in bits = 4 + n (max 10 bits) - uint32_t otg_enable : 1; // 7 OTG capable - uint32_t i2c_enable : 1; // 8 I2C interface is available - uint32_t vendor_ctrl_itf : 1; // 9 Vendor control interface is available - uint32_t optional_feature_removed : 1; // 10 remove User ID, GPIO, SOF toggle & counter to save gate count - uint32_t synch_reset : 1; // 11 0: async reset | 1: synch reset - uint32_t otg_adp_support : 1; // 12 ADP logic is present along with HSOTG controller - uint32_t otg_enable_hsic : 1; // 13 1: HSIC-capable with shared UTMI PHY interface | 0: non-HSIC - uint32_t battery_charger_support : 1; // s14 upport battery charger - uint32_t lpm_mode : 1; // 15 LPM mode - uint32_t dfifo_depth : 16; // DFIFO depth - EP_LOC_CNT in terms of 32-bit words -}dwc2_ghwcfg3_t; +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t xfer_size_width : 4; // 0..3 Transfer size counter in bits = 11 + n (max 19 bits) + uint32_t packet_size_width : 3; // 4..6 Packet size counter in bits = 4 + n (max 10 bits) + uint32_t otg_enable : 1; // 7 OTG capable + uint32_t i2c_enable : 1; // 8 I2C interface is available + uint32_t vendor_ctrl_itf : 1; // 9 Vendor control interface is available + uint32_t optional_feature_removed : 1; // 10 remove User ID, GPIO, SOF toggle & counter to save gate count + uint32_t synch_reset : 1; // 11 0: async reset | 1: synch reset + uint32_t otg_adp_support : 1; // 12 ADP logic is present along with HSOTG controller + uint32_t otg_enable_hsic : 1; // 13 1: HSIC-capable with shared UTMI PHY interface | 0: non-HSIC + uint32_t battery_charger_support : 1; // s14 upport battery charger + uint32_t lpm_mode : 1; // 15 LPM mode + uint32_t dfifo_depth : 16; // DFIFO depth - EP_LOC_CNT in terms of 32-bit words + }; +} dwc2_ghwcfg3_t; TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg3_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t num_dev_period_in_ep : 4; // 0..3 Number of Device Periodic IN Endpoints - uint32_t partial_powerdown : 1; // 4 Partial Power Down Enabled - uint32_t ahb_freq_min : 1; // 5 1: minimum of AHB frequency is less than 60 MHz - uint32_t hibernation : 1; // 6 Hibernation feature is enabled - uint32_t extended_hibernation : 1; // 7 Extended Hibernation feature is enabled - uint32_t reserved8 : 1; // 8 Reserved - uint32_t enhanced_lpm_support1 : 1; // 9 Enhanced LPM Support1 - uint32_t service_interval_flow : 1; // 10 Service Interval flow is supported - uint32_t ipg_isoc_support : 1; // 11 Interpacket GAP ISO OUT worst-case is supported - uint32_t acg_support : 1; // 12 Active clock gating is supported - uint32_t enhanced_lpm_support : 1; // 13 Enhanced LPM Support - uint32_t phy_data_width : 2; // 14..15 0: 8 bits | 1: 16 bits | 2: 8/16 software selectable - uint32_t ctrl_ep_num : 4; // 16..19 Number of Device control endpoints in addition to EP0 - uint32_t iddg_filter : 1; // 20 IDDG Filter Enabled - uint32_t vbus_valid_filter : 1; // 21 VBUS Valid Filter Enabled - uint32_t a_valid_filter : 1; // 22 A Valid Filter Enabled - uint32_t b_valid_filter : 1; // 23 B Valid Filter Enabled - uint32_t session_end_filter : 1; // 24 Session End Filter Enabled - uint32_t dedicated_fifos : 1; // 25 Dedicated tx fifo for device IN Endpoint - uint32_t num_dev_in_eps : 4; // 26..29 Number of Device IN Endpoints including EP0 - uint32_t dma_desc_enabled : 1; // scatter/gather DMA configuration enabled - uint32_t dma_desc_dynamic : 1; // Dynamic scatter/gather DMA -}dwc2_ghwcfg4_t; +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t num_dev_period_in_ep : 4; // 0..3 Number of Device Periodic IN Endpoints + uint32_t partial_powerdown : 1; // 4 Partial Power Down Enabled + uint32_t ahb_freq_min : 1; // 5 1: minimum of AHB frequency is less than 60 MHz + uint32_t hibernation : 1; // 6 Hibernation feature is enabled + uint32_t extended_hibernation : 1; // 7 Extended Hibernation feature is enabled + uint32_t reserved8 : 1; // 8 Reserved + uint32_t enhanced_lpm_support1 : 1; // 9 Enhanced LPM Support1 + uint32_t service_interval_flow : 1; // 10 Service Interval flow is supported + uint32_t ipg_isoc_support : 1; // 11 Interpacket GAP ISO OUT worst-case is supported + uint32_t acg_support : 1; // 12 Active clock gating is supported + uint32_t enhanced_lpm_support : 1; // 13 Enhanced LPM Support + uint32_t phy_data_width : 2; // 14..15 0: 8 bits | 1: 16 bits | 2: 8/16 software selectable + uint32_t ctrl_ep_num : 4; // 16..19 Number of Device control endpoints in addition to EP0 + uint32_t iddg_filter : 1; // 20 IDDG Filter Enabled + uint32_t vbus_valid_filter : 1; // 21 VBUS Valid Filter Enabled + uint32_t a_valid_filter : 1; // 22 A Valid Filter Enabled + uint32_t b_valid_filter : 1; // 23 B Valid Filter Enabled + uint32_t session_end_filter : 1; // 24 Session End Filter Enabled + uint32_t dedicated_fifos : 1; // 25 Dedicated tx fifo for device IN Endpoint + uint32_t num_dev_in_eps : 4; // 26..29 Number of Device IN Endpoints including EP0 + uint32_t dma_desc_enabled : 1; // scatter/gather DMA configuration enabled + uint32_t dma_desc_dynamic : 1; // Dynamic scatter/gather DMA + }; +} dwc2_ghwcfg4_t; TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg4_t) == 4, "incorrect size"); -//-------------------------------------------------------------------- -// Host Register Bitfield -//-------------------------------------------------------------------- - -typedef struct TU_ATTR_PACKED { - uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO - uint32_t req_queue_available : 8; // 16..23 Number of spaces available in the NPT transmit request queue for both IN and OU - // 24..31 is top entry in the request queue that is currently being processed by the MAC - uint32_t qtop_terminate : 1; // 24 Last entry for selected channel - uint32_t qtop_type : 2; // 25..26 Token (0) In/Out (1) ZLP, (2) Ping/cspit, (3) Channel halt command - uint32_t qtop_ch_num : 4; // 27..30 Channel number +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO + uint32_t req_queue_available : 8; // 16..23 Number of spaces available in the NPT transmit request queue for both IN and OU + // 24..31 is top entry in the request queue that is currently being processed by the MAC + uint32_t qtop_terminate : 1; // 24 Last entry for selected channel + uint32_t qtop_type : 2; // 25..26 Token (0) In/Out (1) ZLP, (2) Ping/cspit, (3) Channel halt command + uint32_t qtop_ch_num : 4; // 27..30 Channel number + }; } dwc2_hnptxsts_t; TU_VERIFY_STATIC(sizeof(dwc2_hnptxsts_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO - uint32_t req_queue_available : 7; // 16..22 Number of spaces available in the PTX transmit request queue - uint32_t qtop_terminate : 1; // 23 Last entry for selected channel - uint32_t qtop_last_period : 1; // 24 Last entry for selected channel is a periodic entry - uint32_t qtop_type : 2; // 25..26 Token (0) In/Out (1) ZLP, (2) Ping/cspit, (3) Channel halt command - uint32_t qtop_ch_num : 4; // 27..30 Channel number - uint32_t qtop_odd_frame : 1; // 31 Send in odd frame +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO + uint32_t req_queue_available : 7; // 16..22 Number of spaces available in the PTX transmit request queue + uint32_t qtop_terminate : 1; // 23 Last entry for selected channel + uint32_t qtop_last_period : 1; // 24 Last entry for selected channel is a periodic entry + uint32_t qtop_type : 2; // 25..26 Token (0) In/Out (1) ZLP, (2) Ping/cspit, (3) Channel halt command + uint32_t qtop_ch_num : 4; // 27..30 Channel number + uint32_t qtop_odd_frame : 1; // 31 Send in odd frame + }; } dwc2_hptxsts_t; TU_VERIFY_STATIC(sizeof(dwc2_hptxsts_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t conn_status : 1; // 0 Port connect status - uint32_t conn_detected : 1; // 1 Port connect detected - uint32_t enable : 1; // 2 Port enable status - uint32_t enable_change : 1; // 3 Port enable change - uint32_t over_current_active : 1; // 4 Port Over-current active - uint32_t over_current_change : 1; // 5 Port Over-current change - uint32_t resume : 1; // 6 Port resume - uint32_t suspend : 1; // 7 Port suspend - uint32_t reset : 1; // 8 Port reset - uint32_t rsv9 : 1; // 9 Reserved - uint32_t line_status : 2; // 10..11 Line status - uint32_t power : 1; // 12 Port power - uint32_t test_control : 4; // 13..16 Port Test control - uint32_t speed : 2; // 17..18 Port speed - uint32_t rsv19_31 :13; // 19..31 Reserved -}dwc2_hprt_t; +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t conn_status : 1; // 0 Port connect status + uint32_t conn_detected : 1; // 1 Port connect detected + uint32_t enable : 1; // 2 Port enable status + uint32_t enable_change : 1; // 3 Port enable change + uint32_t over_current_active : 1; // 4 Port Over-current active + uint32_t over_current_change : 1; // 5 Port Over-current change + uint32_t resume : 1; // 6 Port resume + uint32_t suspend : 1; // 7 Port suspend + uint32_t reset : 1; // 8 Port reset + uint32_t rsv9 : 1; // 9 Reserved + uint32_t line_status : 2; // 10..11 Line status + uint32_t power : 1; // 12 Port power + uint32_t test_control : 4; // 13..16 Port Test control + uint32_t speed : 2; // 17..18 Port speed + uint32_t rsv19_31 :13; // 19..31 Reserved + }; +} dwc2_hprt_t; TU_VERIFY_STATIC(sizeof(dwc2_hprt_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t ep_size : 11; // 0..10 Maximum packet size - uint32_t ep_num : 4; // 11..14 Endpoint number - uint32_t ep_dir : 1; // 15 Endpoint direction - uint32_t rsv16 : 1; // 16 Reserved - uint32_t low_speed_dev : 1; // 17 Low-speed device - uint32_t ep_type : 2; // 18..19 Endpoint type - uint32_t err_multi_count : 2; // 20..21 Error (splitEn = 1) / Multi (SplitEn = 0) count - uint32_t dev_addr : 7; // 22..28 Device address - uint32_t odd_frame : 1; // 29 Odd frame - uint32_t disable : 1; // 30 Channel disable - uint32_t enable : 1; // 31 Channel enable +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t ep_size : 11; // 0..10 Maximum packet size + uint32_t ep_num : 4; // 11..14 Endpoint number + uint32_t ep_dir : 1; // 15 Endpoint direction + uint32_t rsv16 : 1; // 16 Reserved + uint32_t low_speed_dev : 1; // 17 Low-speed device + uint32_t ep_type : 2; // 18..19 Endpoint type + uint32_t err_multi_count : 2; // 20..21 Error (splitEn = 1) / Multi (SplitEn = 0) count + uint32_t dev_addr : 7; // 22..28 Device address + uint32_t odd_frame : 1; // 29 Odd frame + uint32_t disable : 1; // 30 Channel disable + uint32_t enable : 1; // 31 Channel enable + }; } dwc2_channel_char_t; TU_VERIFY_STATIC(sizeof(dwc2_channel_char_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t hub_port : 7; // 0..6 Hub port number - uint32_t hub_addr : 7; // 7..13 Hub address - uint32_t xact_pos : 2; // 14..15 Transaction position - uint32_t split_compl : 1; // 16 Split completion - uint32_t rsv17_30 : 14; // 17..30 Reserved - uint32_t split_en : 1; // 31 Split enable +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t hub_port : 7; // 0..6 Hub port number + uint32_t hub_addr : 7; // 7..13 Hub address + uint32_t xact_pos : 2; // 14..15 Transaction position + uint32_t split_compl : 1; // 16 Split completion + uint32_t rsv17_30 : 14; // 17..30 Reserved + uint32_t split_en : 1; // 31 Split enable + }; } dwc2_channel_split_t; TU_VERIFY_STATIC(sizeof(dwc2_channel_split_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t xfer_size : 19; // 0..18 Transfer size in bytes - uint32_t packet_count : 10; // 19..28 Number of packets - uint32_t pid : 2; // 29..30 Packet ID - uint32_t do_ping : 1; // 31 Do PING +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t xfer_size : 19; // 0..18 Transfer size in bytes + uint32_t packet_count : 10; // 19..28 Number of packets + uint32_t pid : 2; // 29..30 Packet ID + uint32_t do_ping : 1; // 31 Do PING + }; } dwc2_channel_tsize_t; TU_VERIFY_STATIC(sizeof(dwc2_channel_tsize_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t num : 16; // 0..15 Frame number - uint32_t remainning : 16; // 16..31 Frame remaining +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t num : 16; // 0..15 Frame number + uint32_t remainning : 16; // 16..31 Frame remaining + }; } dwc2_hfnum_t; TU_VERIFY_STATIC(sizeof(dwc2_hfnum_t) == 4, "incorrect size"); // Host Channel typedef struct { - union { - volatile uint32_t hcchar; // 500 + 20*ch Host Channel Characteristics - volatile dwc2_channel_char_t hcchar_bm; - }; - union { - volatile uint32_t hcsplt; // 504 + 20*ch Host Channel Split Control - volatile dwc2_channel_split_t hcsplt_bm; - }; - volatile uint32_t hcint; // 508 + 20*ch Host Channel Interrupt - volatile uint32_t hcintmsk; // 50C + 20*ch Host Channel Interrupt Mask - union { - volatile uint32_t hctsiz; // 510 + 20*ch Host Channel Transfer Size - volatile dwc2_channel_tsize_t hctsiz_bm; - }; - volatile uint32_t hcdma; // 514 + 20*ch Host Channel DMA Address - uint32_t reserved518; // 518 + 20*ch - volatile uint32_t hcdmab; // 51C + 20*ch Host Channel DMA Address + volatile uint32_t hcchar; // 500 + 20*ch Host Channel Characteristics + volatile uint32_t hcsplt; // 504 + 20*ch Host Channel Split Control + volatile uint32_t hcint; // 508 + 20*ch Host Channel Interrupt + volatile uint32_t hcintmsk; // 50C + 20*ch Host Channel Interrupt Mask + volatile uint32_t hctsiz; // 510 + 20*ch Host Channel Transfer Size + volatile uint32_t hcdma; // 514 + 20*ch Host Channel DMA Address + uint32_t reserved518; // 518 + 20*ch + volatile uint32_t hcdmab; // 51C + 20*ch Host Channel DMA Address } dwc2_channel_t; //-------------------------------------------------------------------- // Device Register Bitfield //-------------------------------------------------------------------- -typedef struct TU_ATTR_PACKED { - uint32_t speed : 2; // 0..1 Speed - uint32_t nzsts_out_handshake : 1; // 2 Non-zero-length status OUT handshake - uint32_t en_32khz_suspsend : 1; // 3 Enable 32-kHz SUSPEND mode - uint32_t address : 7; // 4..10 Device address - uint32_t period_frame_interval : 2; // 11..12 Periodic frame interval - uint32_t en_out_nak : 1; // 13 Enable Device OUT NAK - uint32_t xcvr_delay : 1; // 14 Transceiver delay - uint32_t erratic_int_mask : 1; // 15 Erratic interrupt mask - uint32_t rsv16 : 1; // 16 Reserved - uint32_t ipg_iso_support : 1; // 17 Interpacket gap ISO support - uint32_t epin_mismatch_count : 5; // 18..22 EP IN mismatch count - uint32_t dma_desc : 1; // 23 Enable scatter/gatter DMA descriptor - uint32_t period_schedule_interval : 2; // 24..25 Periodic schedule interval for scatter/gatter DMA - uint32_t resume_valid : 6; // 26..31 Resume valid period +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t speed : 2; // 0..1 Speed + uint32_t nzsts_out_handshake : 1; // 2 Non-zero-length status OUT handshake + uint32_t en_32khz_suspsend : 1; // 3 Enable 32-kHz SUSPEND mode + uint32_t address : 7; // 4..10 Device address + uint32_t period_frame_interval : 2; // 11..12 Periodic frame interval + uint32_t en_out_nak : 1; // 13 Enable Device OUT NAK + uint32_t xcvr_delay : 1; // 14 Transceiver delay + uint32_t erratic_int_mask : 1; // 15 Erratic interrupt mask + uint32_t rsv16 : 1; // 16 Reserved + uint32_t ipg_iso_support : 1; // 17 Interpacket gap ISO support + uint32_t epin_mismatch_count : 5; // 18..22 EP IN mismatch count + uint32_t dma_desc : 1; // 23 Enable scatter/gather DMA descriptor + uint32_t period_schedule_interval : 2; // 24..25 Periodic schedule interval for scatter/gather DMA + uint32_t resume_valid : 6; // 26..31 Resume valid period + }; } dwc2_dcfg_t; TU_VERIFY_STATIC(sizeof(dwc2_dcfg_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t remote_wakeup_signal : 1; // 0 Remote wakeup signal - uint32_t soft_disconnet : 1; // 1 Soft disconnect - uint32_t gnp_in_nak_status : 1; // 2 Global non-periodic NAK IN status - uint32_t gout_nak_status : 1; // 3 Global OUT NAK status - uint32_t test_control : 3; // 4..6 Test control - uint32_t set_gnp_in_nak : 1; // 7 Set global non-periodic IN NAK - uint32_t clear_gnp_in_nak : 1; // 8 Clear global non-periodic IN NAK - uint32_t set_gout_nak : 1; // 9 Set global OUT NAK - uint32_t clear_gout_nak : 1; // 10 Clear global OUT NAK - uint32_t poweron_prog_done : 1; // 11 Power-on programming done - uint32_t rsv12 : 1; // 12 Reserved - uint32_t global_multi_count : 2; // 13..14 Global multi-count - uint32_t ignore_frame_number : 1; // 15 Ignore frame number - uint32_t nak_on_babble : 1; // 16 NAK on babble - uint32_t en_cont_on_bna : 1; // 17 Enable continue on BNA - uint32_t deep_sleep_besl_reject : 1; // 18 Deep sleep BESL reject - uint32_t service_interval : 1; // 19 Service interval for ISO IN endpoint - uint32_t rsv20_31 :12; // 20..31 Reserved +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t remote_wakeup_signal : 1; // 0 Remote wakeup signal + uint32_t soft_disconnet : 1; // 1 Soft disconnect + uint32_t gnp_in_nak_status : 1; // 2 Global non-periodic NAK IN status + uint32_t gout_nak_status : 1; // 3 Global OUT NAK status + uint32_t test_control : 3; // 4..6 Test control + uint32_t set_gnp_in_nak : 1; // 7 Set global non-periodic IN NAK + uint32_t clear_gnp_in_nak : 1; // 8 Clear global non-periodic IN NAK + uint32_t set_gout_nak : 1; // 9 Set global OUT NAK + uint32_t clear_gout_nak : 1; // 10 Clear global OUT NAK + uint32_t poweron_prog_done : 1; // 11 Power-on programming done + uint32_t rsv12 : 1; // 12 Reserved + uint32_t global_multi_count : 2; // 13..14 Global multi-count + uint32_t ignore_frame_number : 1; // 15 Ignore frame number + uint32_t nak_on_babble : 1; // 16 NAK on babble + uint32_t en_cont_on_bna : 1; // 17 Enable continue on BNA + uint32_t deep_sleep_besl_reject : 1; // 18 Deep sleep BESL reject + uint32_t service_interval : 1; // 19 Service interval for ISO IN endpoint + uint32_t rsv20_31 :12; // 20..31 Reserved + }; } dwc2_dctl_t; TU_VERIFY_STATIC(sizeof(dwc2_dctl_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t suspend_status : 1; // 0 Suspend status - uint32_t enum_speed : 2; // 1..2 Enumerated speed - uint32_t erratic_err : 1; // 3 Erratic error - uint32_t rsv4_7 : 4; // 4..7 Reserved - uint32_t frame_number : 14; // 8..21 Frame/MicroFrame number - uint32_t line_status : 2; // 22..23 Line status - uint32_t rsv24_31 : 8; // 24..31 Reserved +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t suspend_status : 1; // 0 Suspend status + uint32_t enum_speed : 2; // 1..2 Enumerated speed + uint32_t erratic_err : 1; // 3 Erratic error + uint32_t rsv4_7 : 4; // 4..7 Reserved + uint32_t frame_number : 14; // 8..21 Frame/MicroFrame number + uint32_t line_status : 2; // 22..23 Line status + uint32_t rsv24_31 : 8; // 24..31 Reserved + }; } dwc2_dsts_t; TU_VERIFY_STATIC(sizeof(dwc2_dsts_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t xfer_complete : 1; // 0 Transfer complete - uint32_t disabled : 1; // 1 Endpoint disabled - uint32_t ahb_err : 1; // 2 AHB error - uint32_t timeout : 1; // 3 Timeout - uint32_t in_rx_txfe : 1; // 4 IN token received when TxFIFO is empty - uint32_t in_rx_ep_mismatch : 1; // 5 IN token received with EP mismatch - uint32_t in_ep_nak_effective : 1; // 6 IN endpoint NAK effective - uint32_t txfifo_empty : 1; // 7 TX FIFO empty - uint32_t txfifo_underrun : 1; // 8 Tx FIFO under run - uint32_t bna : 1; // 9 Buffer not available - uint32_t rsv10 : 1; // 10 Reserved - uint32_t iso_packet_drop : 1; // 11 Isochronous OUT packet drop status - uint32_t babble_err : 1; // 12 Babble error - uint32_t nak : 1; // 13 NAK - uint32_t nyet : 1; // 14 NYET - uint32_t rsv14_31 :17; // 15..31 Reserved +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t xfer_complete : 1; // 0 Transfer complete + uint32_t disabled : 1; // 1 Endpoint disabled + uint32_t ahb_err : 1; // 2 AHB error + uint32_t timeout : 1; // 3 Timeout + uint32_t in_rx_txfe : 1; // 4 IN token received when TxFIFO is empty + uint32_t in_rx_ep_mismatch : 1; // 5 IN token received with EP mismatch + uint32_t in_ep_nak_effective : 1; // 6 IN endpoint NAK effective + uint32_t txfifo_empty : 1; // 7 TX FIFO empty + uint32_t txfifo_underrun : 1; // 8 Tx FIFO under run + uint32_t bna : 1; // 9 Buffer not available + uint32_t rsv10 : 1; // 10 Reserved + uint32_t iso_packet_drop : 1; // 11 Isochronous OUT packet drop status + uint32_t babble_err : 1; // 12 Babble error + uint32_t nak : 1; // 13 NAK + uint32_t nyet : 1; // 14 NYET + uint32_t rsv14_31 :17; // 15..31 Reserved + }; } dwc2_diepint_t; TU_VERIFY_STATIC(sizeof(dwc2_diepint_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t mps : 11; // 0..10 Maximum packet size, EP0 only use 2 bit - uint32_t next_ep : 4; // 11..14 Next endpoint number - uint32_t active : 1; // 15 Active - const uint32_t dpid_iso_odd : 1; // 16 DATA0/DATA1 for bulk/interrupt, odd frame for isochronous - const uint32_t nak_status : 1; // 17 NAK status - uint32_t type : 2; // 18..19 Endpoint type - uint32_t rsv20 : 1; // 20 Reserved - uint32_t stall : 1; // 21 Stall - uint32_t tx_fifo_num : 4; // 22..25 Tx FIFO number (IN) - uint32_t clear_nak : 1; // 26 Clear NAK - uint32_t set_nak : 1; // 27 Set NAK - uint32_t set_data0_iso_even : 1; // 28 Set DATA0 if bulk/interrupt, even frame for isochronous - uint32_t set_data1_iso_odd : 1; // 29 Set DATA1 if bulk/interrupt, odd frame for isochronous - uint32_t disable : 1; // 30 Disable - uint32_t enable : 1; // 31 Enable +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t mps : 11; // 0..10 Maximum packet size, EP0 only use 2 bits + uint32_t next_ep : 4; // 11..14 Next endpoint number + uint32_t active : 1; // 15 Active + uint32_t dpid_iso_odd : 1; // 16 DATA0/DATA1 for bulk/interrupt, odd frame for isochronous + uint32_t nak_status : 1; // 17 NAK status + uint32_t type : 2; // 18..19 Endpoint type + uint32_t rsv20 : 1; // 20 Reserved + uint32_t stall : 1; // 21 Stall + uint32_t tx_fifo_num : 4; // 22..25 Tx FIFO number (IN) + uint32_t clear_nak : 1; // 26 Clear NAK + uint32_t set_nak : 1; // 27 Set NAK + uint32_t set_data0_iso_even : 1; // 28 Set DATA0 if bulk/interrupt, even frame for isochronous + uint32_t set_data1_iso_odd : 1; // 29 Set DATA1 if bulk/interrupt, odd frame for isochronous + uint32_t disable : 1; // 30 Disable + uint32_t enable : 1; // 31 Enable + }; } dwc2_depctl_t; TU_VERIFY_STATIC(sizeof(dwc2_depctl_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t xfer_complete : 1; // 0 Transfer complete - uint32_t disabled : 1; // 1 Endpoint disabled - uint32_t ahb_err : 1; // 2 AHB error - uint32_t setup_phase_done : 1; // 3 Setup phase done - uint32_t out_rx_ep_disabled : 1; // 4 OUT token received when endpoint disabled - uint32_t status_phase_rx : 1; // 5 Status phase received - uint32_t setup_b2b : 1; // 6 Setup packet back-to-back - uint32_t rsv7 : 1; // 7 Reserved - uint32_t out_packet_err : 1; // 8 OUT packet error - uint32_t bna : 1; // 9 Buffer not available - uint32_t rsv10 : 1; // 10 Reserved - uint32_t iso_packet_drop : 1; // 11 Isochronous OUT packet drop status - uint32_t babble_err : 1; // 12 Babble error - uint32_t nak : 1; // 13 NAK - uint32_t nyet : 1; // 14 NYET - uint32_t setup_packet_rx : 1; // 15 Setup packet received (Buffer DMA Mode only) - uint32_t rsv16_31 :16; // 16..31 Reserved +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t xfer_complete : 1; // 0 Transfer complete + uint32_t disabled : 1; // 1 Endpoint disabled + uint32_t ahb_err : 1; // 2 AHB error + uint32_t setup_phase_done : 1; // 3 Setup phase done + uint32_t out_rx_ep_disabled : 1; // 4 OUT token received when endpoint disabled + uint32_t status_phase_rx : 1; // 5 Status phase received + uint32_t setup_b2b : 1; // 6 Setup packet back-to-back + uint32_t rsv7 : 1; // 7 Reserved + uint32_t out_packet_err : 1; // 8 OUT packet error + uint32_t bna : 1; // 9 Buffer not available + uint32_t rsv10 : 1; // 10 Reserved + uint32_t iso_packet_drop : 1; // 11 Isochronous OUT packet drop status + uint32_t babble_err : 1; // 12 Babble error + uint32_t nak : 1; // 13 NAK + uint32_t nyet : 1; // 14 NYET + uint32_t setup_packet_rx : 1; // 15 Setup packet received (Buffer DMA Mode only) + uint32_t rsv16_31 :16; // 16..31 Reserved + }; } dwc2_doepint_t; TU_VERIFY_STATIC(sizeof(dwc2_doepint_t) == 4, "incorrect size"); -typedef struct TU_ATTR_PACKED { - uint32_t xfer_size : 19; // 0..18 Transfer size in bytes - uint32_t packet_count : 10; // 19..28 Number of packets - uint32_t mc_pid : 2; // 29..30 IN: Multi Count, OUT: PID +typedef union { + uint32_t value; + struct TU_ATTR_PACKED { + uint32_t xfer_size : 19; // 0..18 Transfer size in bytes + uint32_t packet_count : 10; // 19..28 Number of packets + uint32_t mc_pid : 2; // 29..30 IN: Multi Count, OUT: PID + }; } dwc2_ep_tsize_t; TU_VERIFY_STATIC(sizeof(dwc2_ep_tsize_t) == 4, "incorrect size"); @@ -601,26 +656,19 @@ typedef struct { union { volatile uint32_t diepctl; volatile uint32_t doepctl; - volatile uint32_t ctl; - volatile dwc2_depctl_t ctl_bm; }; uint32_t rsv04; union { volatile uint32_t intr; - volatile uint32_t diepint; - volatile dwc2_diepint_t diepint_bm; - volatile uint32_t doepint; - volatile dwc2_doepint_t doepint_bm; }; uint32_t rsv0c; union { volatile uint32_t dieptsiz; volatile uint32_t doeptsiz; volatile uint32_t tsiz; - volatile dwc2_ep_tsize_t tsiz_bm; }; union { volatile uint32_t diepdma; @@ -628,7 +676,7 @@ typedef struct { }; volatile uint32_t dtxfsts; uint32_t rsv1c; -}dwc2_dep_t; +} dwc2_dep_t; TU_VERIFY_STATIC(sizeof(dwc2_dep_t) == 0x20, "incorrect size"); @@ -637,156 +685,107 @@ TU_VERIFY_STATIC(sizeof(dwc2_dep_t) == 0x20, "incorrect size"); //-------------------------------------------------------------------- typedef struct { //------------- Core Global -------------// - union { - volatile uint32_t gotgctl; // 000 OTG Control and Status - volatile dwc2_gotgctl_t gotgctl_bm; - }; - union { - volatile uint32_t gotgint; // 004 OTG Interrupt - volatile dwc2_gotgint_t gotgint_bm; - }; - union { - volatile uint32_t gahbcfg; // 008 AHB Configuration - volatile dwc2_gahbcfg_t gahbcfg_bm; - }; - union { - volatile uint32_t gusbcfg; // 00c USB Configuration - volatile dwc2_gusbcfg_t gusbcfg_bm; - }; - union { - volatile uint32_t grstctl; // 010 Reset - volatile dwc2_grstctl_t grstctl_bm; - }; - volatile uint32_t gintsts; // 014 Interrupt - volatile uint32_t gintmsk; // 018 Interrupt Mask - volatile uint32_t grxstsr; // 01c Receive Status Debug Read - union { - volatile uint32_t grxstsp; // 020 Receive Status Read/Pop - volatile dwc2_grxstsp_t grxstsp_bm; - }; - volatile uint32_t grxfsiz; // 024 Receive FIFO Size + volatile uint32_t gotgctl; // 000 OTG Control and Status + volatile uint32_t gotgint; // 004 OTG Interrupt + volatile uint32_t gahbcfg; // 008 AHB Configuration + volatile uint32_t gusbcfg; // 00c USB Configuration + volatile uint32_t grstctl; // 010 Reset + volatile uint32_t gintsts; // 014 Interrupt + volatile uint32_t gintmsk; // 018 Interrupt Mask + volatile uint32_t grxstsr; // 01c Receive Status Debug Read + volatile uint32_t grxstsp; // 020 Receive Status Read/Pop + volatile uint32_t grxfsiz; // 024 Receive FIFO Size union { volatile uint32_t dieptxf0; // 028 EP0 Tx FIFO Size volatile uint32_t gnptxfsiz; // 028 Non-periodic Transmit FIFO Size }; union { volatile uint32_t hnptxsts; // 02c Non-periodic Transmit FIFO/Queue Status - volatile dwc2_hnptxsts_t hnptxsts_bm; volatile uint32_t gnptxsts; }; - volatile uint32_t gi2cctl; // 030 I2C Address - volatile uint32_t gpvndctl; // 034 PHY Vendor Control + volatile uint32_t gi2cctl; // 030 I2C Address + volatile uint32_t gpvndctl; // 034 PHY Vendor Control union { volatile uint32_t ggpio; // 038 General Purpose IO volatile uint32_t stm32_gccfg; // 038 STM32 General Core Configuration }; - volatile uint32_t guid; // 03C User (Application programmable) ID - volatile uint32_t gsnpsid; // 040 Synopsys ID + Release version - volatile uint32_t ghwcfg1; // 044 User Hardware Configuration1: endpoint dir (2 bit per ep) - union { - volatile uint32_t ghwcfg2; // 048 User Hardware Configuration2 - volatile dwc2_ghwcfg2_t ghwcfg2_bm; - }; - union { - volatile uint32_t ghwcfg3; // 04C User Hardware Configuration3 - volatile dwc2_ghwcfg3_t ghwcfg3_bm; - }; + volatile uint32_t guid; // 03C User (Application programmable) ID + volatile uint32_t gsnpsid; // 040 Synopsys ID + Release version + volatile uint32_t ghwcfg1; // 044 User Hardware Configuration1: endpoint dir (2 bit per ep) + volatile uint32_t ghwcfg2; // 048 User Hardware Configuration2 + volatile uint32_t ghwcfg3; // 04C User Hardware Configuration3 union { volatile uint32_t ghwcfg4; // 050 User Hardware Configuration4 volatile dwc2_ghwcfg4_t ghwcfg4_bm; }; - volatile uint32_t glpmcfg; // 054 Core LPM Configuration - volatile uint32_t gpwrdn; // 058 Power Down - volatile uint32_t gdfifocfg; // 05C DFIFO Software Configuration - volatile uint32_t gadpctl; // 060 ADP Timer, Control and Status - uint32_t reserved64[39]; // 064..0FF - volatile uint32_t hptxfsiz; // 100 Host Periodic Tx FIFO Size - volatile uint32_t dieptxf[15]; // 104..13C Device Periodic Transmit FIFO Size - uint32_t reserved140[176]; // 140..3FF - - //------------ Host -------------// - volatile uint32_t hcfg; // 400 Host Configuration - volatile uint32_t hfir; // 404 Host Frame Interval - union { - volatile uint32_t hfnum; // 408 Host Frame Number / Frame Remaining - volatile dwc2_hfnum_t hfnum_bm; - }; - uint32_t reserved40c; // 40C - union { - volatile uint32_t hptxsts; // 410 Host Periodic TX FIFO / Queue Status - volatile dwc2_hptxsts_t hptxsts_bm; - }; - volatile uint32_t haint; // 414 Host All Channels Interrupt - volatile uint32_t haintmsk; // 418 Host All Channels Interrupt Mask - volatile uint32_t hflbaddr; // 41C Host Frame List Base Address - uint32_t reserved420[8]; // 420..43F - union { - volatile uint32_t hprt; // 440 Host Port Control and Status - volatile dwc2_hprt_t hprt_bm; - }; - uint32_t reserved444[47]; // 444..4FF - - //------------- Host Channel -------------// - dwc2_channel_t channel[16]; // 500..6FF Host Channels 0-15 - uint32_t reserved700[64]; // 700..7FF - - //------------- Device -----------// - union { - volatile uint32_t dcfg; // 800 Device Configuration - volatile dwc2_dcfg_t dcfg_bm; - }; + volatile uint32_t glpmcfg; // 054 Core LPM Configuration + volatile uint32_t gpwrdn; // 058 Power Down + volatile uint32_t gdfifocfg; // 05C DFIFO Software Configuration + volatile uint32_t gadpctl; // 060 ADP Timer, Control and Status + uint32_t reserved64[39]; // 064..0FF + volatile uint32_t hptxfsiz; // 100 Host Periodic Tx FIFO Size + volatile uint32_t dieptxf[15]; // 104..13C Device Periodic Transmit FIFO Size + uint32_t reserved140[176]; // 140..3FF + + //------------ Host -------------// + volatile uint32_t hcfg; // 400 Host Configuration + volatile uint32_t hfir; // 404 Host Frame Interval + volatile uint32_t hfnum; // 408 Host Frame Number / Frame Remaining + uint32_t reserved40c; // 40C + volatile uint32_t hptxsts; // 410 Host Periodic TX FIFO / Queue Status + volatile uint32_t haint; // 414 Host All Channels Interrupt + volatile uint32_t haintmsk; // 418 Host All Channels Interrupt Mask + volatile uint32_t hflbaddr; // 41C Host Frame List Base Address + uint32_t reserved420[8]; // 420..43F + volatile uint32_t hprt; // 440 Host Port Control and Status + uint32_t reserved444[47]; // 444..4FF + + //------------- Host Channel -------------// + dwc2_channel_t channel[16]; // 500..6FF Host Channels 0-15 + uint32_t reserved700[64]; // 700..7FF + + //------------- Device -----------// + volatile uint32_t dcfg; // 800 Device Configuration + volatile uint32_t dctl; // 804 Device Control + volatile uint32_t dsts; // 808 Device Status (RO) + uint32_t reserved80c; // 80C + volatile uint32_t diepmsk; // 810 Device IN Endpoint Interrupt Mask + volatile uint32_t doepmsk; // 814 Device OUT Endpoint Interrupt Mask + volatile uint32_t daint; // 818 Device All Endpoints Interrupt + volatile uint32_t daintmsk; // 81C Device All Endpoints Interrupt Mask + volatile uint32_t dtknqr1; // 820 Device IN token sequence learning queue read1 + volatile uint32_t dtknqr2; // 824 Device IN token sequence learning queue read2 + volatile uint32_t dvbusdis; // 828 Device VBUS Discharge Time + volatile uint32_t dvbuspulse; // 82C Device VBUS Pulsing Time + volatile uint32_t dthrctl; // 830 Device threshold Control + volatile uint32_t diepempmsk; // 834 Device IN Endpoint FIFO Empty Interrupt Mask + + // Device Each Endpoint (IN/OUT) Interrupt/Mask for generating dedicated EP interrupt line + // require OTG_MULTI_PROC_INTRPT=1 + volatile uint32_t deachint; // 838 Device Each Endpoint Interrupt + volatile uint32_t deachmsk; // 83C Device Each Endpoint Interrupt mask + volatile uint32_t diepeachmsk[16]; // 840..87C Device Each IN Endpoint mask + volatile uint32_t doepeachmsk[16]; // 880..8BF Device Each OUT Endpoint mask + uint32_t reserved8c0[16]; // 8C0..8FF + + //------------- Device Endpoint -------------// union { - volatile uint32_t dctl; // 804 Device Control - volatile dwc2_dctl_t dctl_bm; - }; - union { - volatile uint32_t dsts; // 808 Device Status (RO) - volatile dwc2_dsts_t dsts_bm; - }; - uint32_t reserved80c; // 80C - union { - volatile uint32_t diepmsk; // 810 Device IN Endpoint Interrupt Mask - volatile dwc2_diepint_t diepmsk_bm; - }; - union { - volatile uint32_t doepmsk; // 814 Device OUT Endpoint Interrupt Mask - volatile dwc2_doepint_t doepmsk_bm; - }; - volatile uint32_t daint; // 818 Device All Endpoints Interrupt - volatile uint32_t daintmsk; // 81C Device All Endpoints Interrupt Mask - volatile uint32_t dtknqr1; // 820 Device IN token sequence learning queue read1 - volatile uint32_t dtknqr2; // 824 Device IN token sequence learning queue read2 - volatile uint32_t dvbusdis; // 828 Device VBUS Discharge Time - volatile uint32_t dvbuspulse; // 82C Device VBUS Pulsing Time - volatile uint32_t dthrctl; // 830 Device threshold Control - volatile uint32_t diepempmsk; // 834 Device IN Endpoint FIFO Empty Interrupt Mask - - // Device Each Endpoint (IN/OUT) Interrupt/Mask for generating dedicated EP interrupt line - // require OTG_MULTI_PROC_INTRPT=1 - volatile uint32_t deachint; // 838 Device Each Endpoint Interrupt - volatile uint32_t deachmsk; // 83C Device Each Endpoint Interrupt mask - volatile uint32_t diepeachmsk[16]; // 840..87C Device Each IN Endpoint mask - volatile uint32_t doepeachmsk[16]; // 880..8BF Device Each OUT Endpoint mask - uint32_t reserved8c0[16]; // 8C0..8FF - - //------------- Device Endpoint -------------// - union { - dwc2_dep_t ep[2][16]; // 0: IN, 1 OUT - struct { - dwc2_dep_t epin[16]; // 900..AFF IN Endpoints - dwc2_dep_t epout[16]; // B00..CFF OUT Endpoints - }; + dwc2_dep_t ep[2][16]; // 0: IN, 1 OUT + struct { + dwc2_dep_t epin[16]; // 900..AFF IN Endpoints + dwc2_dep_t epout[16]; // B00..CFF OUT Endpoints }; - uint32_t reservedd00[64]; // D00..DFF + }; + uint32_t reservedd00[64]; // D00..DFF - //------------- Power Clock -------------// - volatile uint32_t pcgcctl; // E00 Power and Clock Gating Characteristic Control - volatile uint32_t pcgcctl1; // E04 Power and Clock Gating Characteristic Control 1 - uint32_t reservede08[126]; // E08..FFF + //------------- Power Clock -------------// + volatile uint32_t pcgcctl; // E00 Power and Clock Gating Characteristic Control + volatile uint32_t pcgcctl1; // E04 Power and Clock Gating Characteristic Control 1 + uint32_t reservede08[126]; // E08..FFF - //------------- FIFOs -------------// - // Word-accessed only using first pointer since it auto shift - volatile uint32_t fifo[16][0x400]; // 1000..FFFF Endpoint FIFO + //------------- FIFOs -------------// + // Word-accessed only using first pointer since it auto shift + volatile uint32_t fifo[16][0x400]; // 1000..FFFF Endpoint FIFO } dwc2_regs_t; TU_VERIFY_STATIC(offsetof(dwc2_regs_t, hcfg ) == 0x0400, "incorrect size"); diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index b13479b02..af17bb59a 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -44,7 +44,7 @@ #endif #define DWC2_CHANNEL_COUNT_MAX 16 // absolute max channel count -#define DWC2_CHANNEL_COUNT(_dwc2) tu_min8((_dwc2)->ghwcfg2_bm.num_host_ch + 1, DWC2_CHANNEL_COUNT_MAX) +#define DWC2_CHANNEL_COUNT(_dwc2) ({const dwc2_ghwcfg2_t ghwcfg2 = {.value = (_dwc2)->ghwcfg2}; tu_min8(ghwcfg2.num_host_ch + 1, DWC2_CHANNEL_COUNT_MAX);}) TU_VERIFY_STATIC(CFG_TUH_DWC2_ENDPOINT_MAX <= 255, "currently only use 8-bit for index"); @@ -118,7 +118,8 @@ hcd_data_t _hcd_data; //-------------------------------------------------------------------- TU_ATTR_ALWAYS_INLINE static inline tusb_speed_t hprt_speed_get(dwc2_regs_t* dwc2) { tusb_speed_t speed; - switch(dwc2->hprt_bm.speed) { + const dwc2_hprt_t hprt = {.value = dwc2->hprt}; + switch(hprt.speed) { case HPRT_SPEED_HIGH: speed = TUSB_SPEED_HIGH; break; case HPRT_SPEED_FULL: speed = TUSB_SPEED_FULL; break; case HPRT_SPEED_LOW : speed = TUSB_SPEED_LOW ; break; @@ -133,7 +134,8 @@ TU_ATTR_ALWAYS_INLINE static inline tusb_speed_t hprt_speed_get(dwc2_regs_t* dwc TU_ATTR_ALWAYS_INLINE static inline bool dma_host_enabled(const dwc2_regs_t* dwc2) { (void) dwc2; // Internal DMA only - return CFG_TUH_DWC2_DMA_ENABLE && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + return CFG_TUH_DWC2_DMA_ENABLE && ghwcfg2.arch == GHWCFG2_ARCH_INTERNAL_DMA; } #if CFG_TUH_MEM_DCACHE_ENABLE @@ -168,15 +170,18 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t channel_alloc(dwc2_regs_t* dwc2) { } // Check if is periodic (interrupt/isochronous) -TU_ATTR_ALWAYS_INLINE static inline bool edpt_is_periodic(uint8_t ep_type) { - return ep_type == HCCHAR_EPTYPE_INTERRUPT || ep_type == HCCHAR_EPTYPE_ISOCHRONOUS; +TU_ATTR_ALWAYS_INLINE static inline bool channel_is_periodic(uint32_t hcchar) { + const dwc2_channel_char_t hcchar_bm = {.value = hcchar}; + return hcchar_bm.ep_type == HCCHAR_EPTYPE_INTERRUPT || hcchar_bm.ep_type == HCCHAR_EPTYPE_ISOCHRONOUS; } TU_ATTR_ALWAYS_INLINE static inline uint8_t req_queue_avail(const dwc2_regs_t* dwc2, bool is_period) { if (is_period) { - return dwc2->hptxsts_bm.req_queue_available; + const dwc2_hptxsts_t hptxsts = {.value = dwc2->hptxsts}; + return hptxsts.req_queue_available; } else { - return dwc2->hnptxsts_bm.req_queue_available; + const dwc2_hnptxsts_t hnptxsts = {.value = dwc2->hnptxsts}; + return hnptxsts.req_queue_available; } } @@ -188,7 +193,7 @@ TU_ATTR_ALWAYS_INLINE static inline void channel_dealloc(dwc2_regs_t* dwc2, uint TU_ATTR_ALWAYS_INLINE static inline bool channel_disable(const dwc2_regs_t* dwc2, dwc2_channel_t* channel) { // disable also require request queue - TU_ASSERT(req_queue_avail(dwc2, edpt_is_periodic(channel->hcchar_bm.ep_type))); + TU_ASSERT(req_queue_avail(dwc2, channel_is_periodic(channel->hcchar))); channel->hcintmsk |= HCINT_HALTED; channel->hcchar |= HCCHAR_CHDIS | HCCHAR_CHENA; // must set both CHDIS and CHENA return true; @@ -196,7 +201,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool channel_disable(const dwc2_regs_t* dwc2 // attempt to send IN token to receive data TU_ATTR_ALWAYS_INLINE static inline bool channel_send_in_token(const dwc2_regs_t* dwc2, dwc2_channel_t* channel) { - TU_ASSERT(req_queue_avail(dwc2, edpt_is_periodic(channel->hcchar_bm.ep_type))); + TU_ASSERT(req_queue_avail(dwc2, channel_is_periodic(channel->hcchar))); channel->hcchar |= HCCHAR_CHENA; return true; } @@ -206,8 +211,8 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t channel_find_enabled(dwc2_regs_t* dw const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { if (_hcd_data.xfer[ch_id].allocated) { - const dwc2_channel_char_t hcchar_bm = dwc2->channel[ch_id].hcchar_bm; - if (hcchar_bm.dev_addr == dev_addr && hcchar_bm.ep_num == ep_num && (ep_num == 0 || hcchar_bm.ep_dir == ep_dir)) { + const dwc2_channel_char_t hcchar = {.value = dwc2->channel[ch_id].hcchar}; + if (hcchar.dev_addr == dev_addr && hcchar.ep_num == ep_num && (ep_num == 0 || hcchar.ep_dir == ep_dir)) { return ch_id; } } @@ -304,12 +309,13 @@ TU_ATTR_ALWAYS_INLINE static inline uint8_t cal_next_pid(uint8_t pid, uint8_t pa static void dfifo_host_init(uint8_t rhport) { const dwc2_controller_t* dwc2_controller = &_dwc2_controller[rhport]; dwc2_regs_t* dwc2 = DWC2_REG(rhport); + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; // Scatter/Gather DMA mode is not yet supported. Buffer DMA only need 1 words per channel const bool is_dma = dma_host_enabled(dwc2); uint16_t dfifo_top = dwc2_controller->ep_fifo_size/4; if (is_dma) { - dfifo_top -= dwc2->ghwcfg2_bm.num_host_ch; + dfifo_top -= ghwcfg2.num_host_ch; } // fixed allocation for now, improve later: @@ -319,7 +325,7 @@ static void dfifo_host_init(uint8_t rhport) { uint32_t ptx_largest = is_highspeed ? TUSB_EPSIZE_ISO_HS_MAX/4 : 256/4; uint16_t nptxfsiz = 2 * nptx_largest; - uint16_t rxfsiz = 2 * (ptx_largest + 2) + dwc2->ghwcfg2_bm.num_host_ch; + uint16_t rxfsiz = 2 * (ptx_largest + 2) + ghwcfg2.num_host_ch; TU_ASSERT(dfifo_top >= (nptxfsiz + rxfsiz),); uint16_t ptxfsiz = dfifo_top - (nptxfsiz + rxfsiz); @@ -509,10 +515,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t* // clean up channel after part of transfer is done but the whole urb is not complete static void channel_xfer_out_wrapup(dwc2_regs_t* dwc2, uint8_t ch_id) { hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - dwc2_channel_t* channel = &dwc2->channel[ch_id]; + const dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; - edpt->next_pid = channel->hctsiz_bm.pid; // save PID + const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; + edpt->next_pid = hctsiz.pid; // save PID /* Since hctsiz.xfersize field reflects the number of bytes transferred via the AHB, not the USB) * For IN: we can use hctsiz.xfersize as remaining bytes. @@ -520,9 +527,10 @@ static void channel_xfer_out_wrapup(dwc2_regs_t* dwc2, uint8_t ch_id) { * number of packets that have been transferred via the USB. This is always an integral number of packets if the * transfer was halted before its normal completion. */ - const uint16_t remain_packets = channel->hctsiz_bm.packet_count; - const uint16_t total_packets = cal_packet_count(edpt->buflen, channel->hcchar_bm.ep_size); - const uint16_t actual_bytes = (total_packets - remain_packets) * channel->hcchar_bm.ep_size; + const uint16_t remain_packets = hctsiz.packet_count; + const dwc2_channel_char_t hcchar = {.value = channel->hcchar}; + const uint16_t total_packets = cal_packet_count(edpt->buflen, hcchar.ep_size); + const uint16_t actual_bytes = (total_packets - remain_packets) * hcchar.ep_size; xfer->fifo_bytes = 0; xfer->xferred_bytes += actual_bytes; @@ -535,7 +543,7 @@ static bool channel_xfer_start(dwc2_regs_t* dwc2, uint8_t ch_id) { hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; dwc2_channel_char_t* hcchar_bm = &edpt->hcchar_bm; dwc2_channel_t* channel = &dwc2->channel[ch_id]; - bool const is_period = edpt_is_periodic(hcchar_bm->ep_type); + bool const is_period = channel_is_periodic(hcchar_bm->ep_type); // clear previous state xfer->fifo_bytes = 0; @@ -548,12 +556,15 @@ static bool channel_xfer_start(dwc2_regs_t* dwc2, uint8_t ch_id) { // hctsiz: zero length packet still count as 1 const uint16_t packet_count = cal_packet_count(edpt->buflen, hcchar_bm->ep_size); - uint32_t hctsiz = (edpt->next_pid << HCTSIZ_PID_Pos) | (packet_count << HCTSIZ_PKTCNT_Pos) | edpt->buflen; + dwc2_channel_tsize_t hctsiz = {.value = 0}; + hctsiz.pid = edpt->next_pid; // next PID is set in transfer complete interrupt + hctsiz.packet_count = packet_count; + hctsiz.xfer_size = edpt->buflen; if (edpt->do_ping && edpt->speed == TUSB_SPEED_HIGH && edpt->next_pid != HCTSIZ_PID_SETUP && hcchar_bm->ep_dir == TUSB_DIR_OUT) { - hctsiz |= HCTSIZ_DOPING; + hctsiz.do_ping = 1; } - channel->hctsiz = hctsiz; + channel->hctsiz = hctsiz.value; edpt->do_ping = 0; // pre-calculate next PID based on packet count, adjusted in transfer complete interrupt if short packet @@ -699,13 +710,16 @@ static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; - if (edpt_is_periodic(channel->hcchar_bm.ep_type)){ + if (channel_is_periodic(channel->hcchar)){ + const dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; // retry immediately for periodic split NYET if we haven't reach max retry - if (channel->hcsplt_bm.split_en && channel->hcsplt_bm.split_compl && (hcint & HCINT_NYET || xfer->halted_nyet)) { + if (hcsplt.split_en && hcsplt.split_compl && (hcint & HCINT_NYET || xfer->halted_nyet)) { xfer->period_split_nyet_count++; xfer->halted_nyet = 0; if (xfer->period_split_nyet_count < HCD_XFER_PERIOD_SPLIT_NYET_MAX) { - channel->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + dwc2_channel_char_t hcchar = {.value = channel->hcchar}; + hcchar.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + channel->hcchar = hcchar.value; channel_send_in_token(dwc2, channel); return; } else { @@ -715,7 +729,8 @@ static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci } // for periodic, de-allocate channel, enable SOF set frame counter for later transfer - edpt->next_pid = channel->hctsiz_bm.pid; // save PID + const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; + edpt->next_pid = hctsiz.pid; // save PID edpt->uframe_countdown = edpt->uframe_interval; dwc2->gintmsk |= GINTSTS_SOF; @@ -756,13 +771,13 @@ static void handle_rxflvl_irq(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); // Pop control word off FIFO - const dwc2_grxstsp_t grxstsp_bm = dwc2->grxstsp_bm; - const uint8_t ch_id = grxstsp_bm.ep_ch_num; + const dwc2_grxstsp_t grxstsp = {.value= dwc2->grxstsp}; + const uint8_t ch_id = grxstsp.ep_ch_num; - switch (grxstsp_bm.packet_status) { + switch (grxstsp.packet_status) { case GRXSTS_PKTSTS_RX_DATA: { // In packet received, pop this entry --> ACK interrupt - const uint16_t byte_count = grxstsp_bm.byte_count; + const uint16_t byte_count = grxstsp.byte_count; hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; TU_ASSERT(xfer->ep_id < CFG_TUH_DWC2_ENDPOINT_MAX,); hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; @@ -796,25 +811,26 @@ static void handle_rxflvl_irq(uint8_t rhport) { // return true if there is still pending data and need more ISR static bool handle_txfifo_empty(dwc2_regs_t* dwc2, bool is_periodic) { // Use period txsts for both p/np to get request queue space available (1-bit difference, it is small enough) - volatile dwc2_hptxsts_t* txsts_bm = (volatile dwc2_hptxsts_t*) (is_periodic ? &dwc2->hptxsts : &dwc2->hnptxsts); + const dwc2_hptxsts_t txsts = {.value = (is_periodic ? dwc2->hptxsts : dwc2->hnptxsts)}; const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { dwc2_channel_t* channel = &dwc2->channel[ch_id]; + const dwc2_channel_char_t hcchar = {.value = channel->hcchar}; // skip writing to FIFO if channel is expecting halted. - if (!(channel->hcintmsk & HCINT_HALTED) && (channel->hcchar_bm.ep_dir == TUSB_DIR_OUT)) { + if (!(channel->hcintmsk & HCINT_HALTED) && (hcchar.ep_dir == TUSB_DIR_OUT)) { hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; TU_ASSERT(xfer->ep_id < CFG_TUH_DWC2_ENDPOINT_MAX); hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; - - const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; + const uint16_t remain_packets = hctsiz.packet_count; for (uint16_t i = 0; i < remain_packets; i++) { const uint16_t remain_bytes = edpt->buflen - xfer->fifo_bytes; - const uint16_t xact_bytes = tu_min16(remain_bytes, channel->hcchar_bm.ep_size); + const uint16_t xact_bytes = tu_min16(remain_bytes, hcchar.ep_size); // skip if there is not enough space in FIFO and RequestQueue. // Packet's last word written to FIFO will trigger a request queue - if ((xact_bytes > (txsts_bm->fifo_available << 2)) || (txsts_bm->req_queue_available == 0)) { + if ((xact_bytes > (txsts.fifo_available << 2)) || (txsts.req_queue_available == 0)) { return true; } @@ -831,23 +847,27 @@ static bool handle_channel_in_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t h hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + const dwc2_channel_char_t hcchar = {.value = channel->hcchar}; + dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; + const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; bool is_done = false; - // if (channel->hcsplt_bm.split_en) { + // if (hcsplt.split_en) { // if (edpt->hcchar_bm.ep_num == 1) { - // TU_LOG1("Frame %u, ch %u: ep %u, hcint 0x%04lX ", dwc2->hfnum_bm.num, ch_id, channel->hcchar_bm.ep_num, hcint); + // TU_LOG1("Frame %u, ch %u: ep %u, hcint 0x%04lX ", dwc2->hfnum_bm.num, ch_id, hcsplt.ep_num, hcint); // print_hcint(hcint); // } if (hcint & HCINT_XFER_COMPLETE) { if (edpt->hcchar_bm.ep_num != 0) { - edpt->next_pid = channel->hctsiz_bm.pid; // save pid (already toggled) + edpt->next_pid = hctsiz.pid; // save pid (already toggled) } - const uint16_t remain_packets = channel->hctsiz_bm.packet_count; - if (channel->hcsplt_bm.split_en && remain_packets && xfer->fifo_bytes == edpt->hcchar_bm.ep_size) { + const uint16_t remain_packets = hctsiz.packet_count; + if (hcsplt.split_en && remain_packets && xfer->fifo_bytes == edpt->hcchar_bm.ep_size) { // Split can only complete 1 transaction (up to 1 packet) at a time, schedule more - channel->hcsplt_bm.split_compl = 0; + hcsplt.split_compl = 0; + channel->hcsplt = hcsplt.value; } else { xfer->result = XFER_RESULT_SUCCESS; } @@ -866,34 +886,38 @@ static bool handle_channel_in_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t h channel_disable(dwc2, channel); } else if (hcint & HCINT_NYET) { // restart complete split - channel->hcsplt_bm.split_compl = 1; + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; xfer->halted_nyet = 1; channel_disable(dwc2, channel); } else if (hcint & HCINT_NAK) { // NAK received, re-enable channel if request queue is available - if (channel->hcsplt_bm.split_en) { - channel->hcsplt_bm.split_compl = 0; // restart with start-split + if (hcsplt.split_en) { + hcsplt.split_compl = 0; // restart with start-split + channel->hcsplt = hcsplt.value; } channel_disable(dwc2, channel); } else if (hcint & HCINT_ACK) { xfer->err_count = 0; - if (channel->hcsplt_bm.split_en) { - if (!channel->hcsplt_bm.split_compl) { + if (hcsplt.split_en) { + if (!hcsplt.split_compl) { // start split is ACK --> do complete split channel->hcintmsk |= HCINT_NYET; - channel->hcsplt_bm.split_compl = 1; + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; channel_send_in_token(dwc2, channel); } else { // do nothing for complete split with DATA, this will trigger XferComplete and handled there } } else { // ACK with data - const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + const uint16_t remain_packets = hctsiz.packet_count; if (remain_packets) { // still more packet to receive, also reset to start split - channel->hcsplt_bm.split_compl = 0; + hcsplt.split_compl = 0; + channel->hcsplt = hcsplt.value; channel_send_in_token(dwc2, channel); } } @@ -922,6 +946,7 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; bool is_done = false; if (hcint & HCINT_XFER_COMPLETE) { @@ -933,9 +958,10 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t channel_disable(dwc2, channel); } else if (hcint & HCINT_NYET) { xfer->err_count = 0; - if (channel->hcsplt_bm.split_en) { + if (hcsplt.split_en) { // retry complete split - channel->hcsplt_bm.split_compl = 1; + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; channel->hcchar |= HCCHAR_CHENA; } else { edpt->do_ping = 1; @@ -968,9 +994,10 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t } else if (hcint & HCINT_ACK) { xfer->err_count = 0; channel->hcintmsk &= ~HCINT_ACK; - if (channel->hcsplt_bm.split_en && !channel->hcsplt_bm.split_compl) { + if (hcsplt.split_en && !hcsplt.split_compl) { // start split is ACK --> do complete split - channel->hcsplt_bm.split_compl = 1; + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; channel->hcchar |= HCCHAR_CHENA; } } @@ -989,6 +1016,9 @@ static bool handle_channel_in_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + dwc2_channel_char_t hcchar = {.value = channel->hcchar}; + dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; + const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; bool is_done = false; @@ -996,8 +1026,8 @@ static bool handle_channel_in_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci if (hcint & HCINT_HALTED) { if (hcint & (HCINT_XFER_COMPLETE | HCINT_STALL | HCINT_BABBLE_ERR)) { - const uint16_t remain_bytes = (uint16_t) channel->hctsiz_bm.xfer_size; - const uint16_t remain_packets = channel->hctsiz_bm.packet_count; + const uint16_t remain_bytes = (uint16_t) hctsiz.xfer_size; + const uint16_t remain_packets = hctsiz.packet_count; const uint16_t actual_len = edpt->buflen - remain_bytes; xfer->xferred_bytes += actual_len; @@ -1007,13 +1037,14 @@ static bool handle_channel_in_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci xfer->result = XFER_RESULT_STALLED; } else if (hcint & HCINT_BABBLE_ERR) { xfer->result = XFER_RESULT_FAILED; - } else if (channel->hcsplt_bm.split_en && remain_packets && actual_len == edpt->hcchar_bm.ep_size) { + } else if (hcsplt.split_en && remain_packets && actual_len == hcchar.ep_size) { // Split can only complete 1 transaction (up to 1 packet) at a time, schedule more is_done = false; edpt->buffer += actual_len; edpt->buflen -= actual_len; - channel->hcsplt_bm.split_compl = 0; + hcsplt.split_compl = 0; + channel->hcsplt = hcsplt.value; channel_xfer_in_retry(dwc2, ch_id, hcint); } else { xfer->result = XFER_RESULT_SUCCESS; @@ -1028,33 +1059,38 @@ static bool handle_channel_in_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci xfer->result = XFER_RESULT_FAILED; } else { channel->hcintmsk |= HCINT_ACK | HCINT_NAK | HCINT_DATATOGGLE_ERR; - channel->hcsplt_bm.split_compl = 0; + hcsplt.split_compl = 0; + channel->hcsplt = hcsplt.value; channel_xfer_in_retry(dwc2, ch_id, hcint); } } else if (hcint & HCINT_NYET) { // Must handle nyet before nak or ack. Could get a nyet at the same time as either of those on a BULK/CONTROL // OUT that started with a PING. The nyet takes precedence. - if (channel->hcsplt_bm.split_en) { + if (hcsplt.split_en) { // split not yet mean hub has no data, retry complete split - channel->hcsplt_bm.split_compl = 1; + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; channel_xfer_in_retry(dwc2, ch_id, hcint); } } else if (hcint & HCINT_ACK) { xfer->err_count = 0; channel->hcintmsk &= ~HCINT_ACK; - if (channel->hcsplt_bm.split_en) { + if (hcsplt.split_en) { // start split is ACK --> do complete split // TODO: for ISO must use xact_pos to plan complete split based on microframe (up to 187.5 bytes/uframe) - channel->hcsplt_bm.split_compl = 1; - if (edpt_is_periodic(channel->hcchar_bm.ep_type)) { - channel->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; + if (channel_is_periodic(channel->hcchar)) { + hcchar.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + channel->hcchar = hcchar.value; } channel_send_in_token(dwc2, channel); } } else if (hcint & (HCINT_NAK | HCINT_DATATOGGLE_ERR)) { xfer->err_count = 0; channel->hcintmsk &= ~(HCINT_NAK | HCINT_DATATOGGLE_ERR); - channel->hcsplt_bm.split_compl = 0; // restart with start-split + hcsplt.split_compl = 0; // restart with start-split + channel->hcsplt = hcsplt.value; channel_xfer_in_retry(dwc2, ch_id, hcint); } else if (hcint & HCINT_FARME_OVERRUN) { // retry start-split in next binterval @@ -1069,6 +1105,8 @@ static bool handle_channel_out_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hc hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + const dwc2_channel_char_t hcchar = {.value = channel->hcchar}; + dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; bool is_done = false; @@ -1104,16 +1142,18 @@ static bool handle_channel_out_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hc } } } else if (hcint & HCINT_NYET) { - if (channel->hcsplt_bm.split_en && channel->hcsplt_bm.split_compl) { + if (hcsplt.split_en && hcsplt.split_compl) { // split not yet mean hub has no data, retry complete split - channel->hcsplt_bm.split_compl = 1; + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; channel->hcchar |= HCCHAR_CHENA; } } else if (hcint & HCINT_ACK) { xfer->err_count = 0; - if (channel->hcsplt_bm.split_en && !channel->hcsplt_bm.split_compl) { + if (hcsplt.split_en && !hcsplt.split_compl) { // start split is ACK --> do complete split - channel->hcsplt_bm.split_compl = 1; + hcsplt.split_compl = 1; + channel->hcsplt = hcsplt.value; channel->hcchar |= HCCHAR_CHENA; } } @@ -1136,7 +1176,7 @@ static void handle_channel_irq(uint8_t rhport, bool in_isr) { dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; TU_ASSERT(xfer->ep_id < CFG_TUH_DWC2_ENDPOINT_MAX,); - dwc2_channel_char_t hcchar_bm = channel->hcchar_bm; + dwc2_channel_char_t hcchar = {.value = channel->hcchar}; const uint32_t hcint = channel->hcint; channel->hcint = hcint; // clear interrupt @@ -1144,7 +1184,7 @@ static void handle_channel_irq(uint8_t rhport, bool in_isr) { bool is_done = false; if (is_dma) { #if CFG_TUH_DWC2_DMA_ENABLE - if (hcchar_bm.ep_dir == TUSB_DIR_OUT) { + if (hcchar.ep_dir == TUSB_DIR_OUT) { is_done = handle_channel_out_dma(dwc2, ch_id, hcint); } else { is_done = handle_channel_in_dma(dwc2, ch_id, hcint); @@ -1156,7 +1196,7 @@ static void handle_channel_irq(uint8_t rhport, bool in_isr) { #endif } else { #if CFG_TUH_DWC2_SLAVE_ENABLE - if (hcchar_bm.ep_dir == TUSB_DIR_OUT) { + if (hcchar.ep_dir == TUSB_DIR_OUT) { is_done = handle_channel_out_slave(dwc2, ch_id, hcint); } else { is_done = handle_channel_in_slave(dwc2, ch_id, hcint); @@ -1165,8 +1205,8 @@ static void handle_channel_irq(uint8_t rhport, bool in_isr) { } if (is_done) { - const uint8_t ep_addr = tu_edpt_addr(hcchar_bm.ep_num, hcchar_bm.ep_dir); - hcd_event_xfer_complete(hcchar_bm.dev_addr, ep_addr, xfer->xferred_bytes, xfer->result, in_isr); + const uint8_t ep_addr = tu_edpt_addr(hcchar.ep_num, hcchar.ep_dir); + hcd_event_xfer_complete(hcchar.dev_addr, ep_addr, xfer->xferred_bytes, (xfer_result_t)xfer->result, in_isr); channel_dealloc(dwc2, ch_id); } } @@ -1185,7 +1225,7 @@ static bool handle_sof_irq(uint8_t rhport, bool in_isr) { for(uint8_t ep_id = 0; ep_id < CFG_TUH_DWC2_ENDPOINT_MAX; ep_id++) { hcd_endpoint_t* edpt = &_hcd_data.edpt[ep_id]; - if (edpt->hcchar_bm.enable && edpt_is_periodic(edpt->hcchar_bm.ep_type) && edpt->uframe_countdown > 0) { + if (edpt->hcchar_bm.enable && channel_is_periodic(edpt->hcchar) && edpt->uframe_countdown > 0) { edpt->uframe_countdown -= tu_min32(ucount, edpt->uframe_countdown); if (edpt->uframe_countdown == 0) { if (!edpt_xfer_kickoff(dwc2, ep_id)) { @@ -1204,10 +1244,10 @@ static bool handle_sof_irq(uint8_t rhport, bool in_isr) { static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { uint32_t hcfg = dwc2->hcfg & ~HCFG_FSLS_PHYCLK_SEL; - const dwc2_gusbcfg_t gusbcfg_bm = dwc2->gusbcfg_bm; + const dwc2_gusbcfg_t gusbcfg = {.value = dwc2->gusbcfg}; uint32_t phy_clock; - if (gusbcfg_bm.phy_sel) { + if (gusbcfg.phy_sel) { phy_clock = 48; // dedicated FS is 48Mhz if (speed == TUSB_SPEED_LOW) { hcfg |= HCFG_FSLS_PHYCLK_SEL_6MHZ; @@ -1215,11 +1255,11 @@ static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { hcfg |= HCFG_FSLS_PHYCLK_SEL_48MHZ; } } else { - if (gusbcfg_bm.ulpi_utmi_sel) { + if (gusbcfg.ulpi_utmi_sel) { phy_clock = 60; // ULPI 8-bit is 60Mhz } else { // UTMI+ 16-bit is 30Mhz, 8-bit is 60Mhz - phy_clock = gusbcfg_bm.phy_if16 ? 30 : 60; + phy_clock = gusbcfg.phy_if16 ? 30 : 60; // Enable UTMI+ low power mode 48Mhz external clock if not highspeed if (speed == TUSB_SPEED_HIGH) { @@ -1252,7 +1292,7 @@ static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { static void handle_hprt_irq(uint8_t rhport, bool in_isr) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint32_t hprt = dwc2->hprt & ~HPRT_W1_MASK; - const dwc2_hprt_t hprt_bm = dwc2->hprt_bm; + const dwc2_hprt_t hprt_bm = {.value = hprt}; if (dwc2->hprt & HPRT_CONN_DETECT) { // Port Connect Detect -- cgit v1.3.1 From 2aff61ccb3797b85b99d6a1f3c3fb04a52f0d4fc Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Wed, 9 Apr 2025 19:40:03 +0200 Subject: Fix CI. Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 1 - 1 file changed, 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index af17bb59a..f3dc23b9c 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -847,7 +847,6 @@ static bool handle_channel_in_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t h hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; - const dwc2_channel_char_t hcchar = {.value = channel->hcchar}; dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; bool is_done = false; -- cgit v1.3.1 From 72357cdb20ee7dca5a19d02ce9b7f14d237fb29e Mon Sep 17 00:00:00 2001 From: Maxime Vincent Date: Fri, 11 Apr 2025 12:15:56 +0200 Subject: dwc2/host: HFIR: Fix timing off-by-one --- src/portable/synopsys/dwc2/hcd_dwc2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 7cbef05b7..6f7551ed7 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -1242,9 +1242,9 @@ static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { uint32_t hfir = dwc2->hfir & ~HFIR_FRIVL_Msk; if (speed == TUSB_SPEED_HIGH) { - hfir |= 125*phy_clock; + hfir |= 125*phy_clock - 1; // The "- 1" is the correct value. The Synopsys databook was corrected in 3.30a } else { - hfir |= 1000*phy_clock; + hfir |= 1000*phy_clock - 1; } dwc2->hfir = hfir; -- cgit v1.3.1 From 2064ee470d6c7b434d6b3aafe017ed60c3b17ab5 Mon Sep 17 00:00:00 2001 From: Maxime Vincent Date: Fri, 11 Apr 2025 12:14:07 +0200 Subject: dwc2/host: attach debouncing fixes --- src/host/usbh.c | 2 +- src/portable/synopsys/dwc2/hcd_dwc2.c | 26 +++++++++++++++++++++++--- 2 files changed, 24 insertions(+), 4 deletions(-) (limited to 'src/portable') diff --git a/src/host/usbh.c b/src/host/usbh.c index e60db53da..4b0f4d488 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -1038,7 +1038,7 @@ TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) // Check if dev0 is removed if ((event->rhport == _dev0.rhport) && (event->connection.hub_addr == _dev0.hub_addr) && (event->connection.hub_port == _dev0.hub_port)) { - _dev0.enumerating = 0; + //_dev0.enumerating = 0;// Causes assert in dwc2 process_enumeration() -> ENUM_ADDR0_DEVICE_DESC } break; diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 7cbef05b7..65288e30c 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -109,6 +109,7 @@ typedef struct { typedef struct { hcd_xfer_t xfer[DWC2_CHANNEL_COUNT_MAX]; hcd_endpoint_t edpt[CFG_TUH_DWC2_ENDPOINT_MAX]; + bool attach_debounce; // if true: wait for the debounce delay before issuing new attach events } hcd_data_t; hcd_data_t _hcd_data; @@ -413,6 +414,11 @@ uint32_t hcd_frame_number(uint8_t rhport) { // Get the current connect status of roothub port bool hcd_port_connect_status(uint8_t rhport) { + // this is called from enum_new_device() - after the debouncing delays + if (_hcd_data.attach_debounce) { + _hcd_data.attach_debounce = false; // allow new attach events again + } + dwc2_regs_t* dwc2 = DWC2_REG(rhport); return dwc2->hprt & HPRT_CONN_STATUS; } @@ -1265,9 +1271,10 @@ static void handle_hprt_irq(uint8_t rhport, bool in_isr) { hprt |= HPRT_CONN_DETECT; if (hprt_bm.conn_status) { - hcd_event_device_attach(rhport, in_isr); - } else { - hcd_event_device_remove(rhport, in_isr); + if (!_hcd_data.attach_debounce) { + _hcd_data.attach_debounce = true; // block new attach events until the debounce delay is over + hcd_event_device_attach(rhport, in_isr); + } } } @@ -1330,6 +1337,19 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { handle_channel_irq(rhport, in_isr); } + if (gintsts & GINTSTS_DISCINT) { + // Device disconnected + dwc2->gintsts = GINTSTS_DISCINT; + + // ignore device removal if attach debounce is active + // it will evaluate the port status after the debounce delay + if (!_hcd_data.attach_debounce) { + if (!(dwc2->hprt & HPRT_CONN_STATUS)) { + hcd_event_device_remove(rhport, in_isr); + } + } + } + #if CFG_TUH_DWC2_SLAVE_ENABLE // RxFIFO non-empty interrupt handling if (gintsts & GINTSTS_RXFLVL) { -- cgit v1.3.1 From 925010fd841c5442579c503a3b1aa211cc25e8b2 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 11 Apr 2025 17:02:42 +0200 Subject: host/dwc2: resume OUT transfer when PING ACKed Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 7cbef05b7..22f3bc70a 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -590,7 +590,7 @@ static bool channel_xfer_start(dwc2_regs_t* dwc2, uint8_t ch_id) { hcintmsk |= HCINT_BABBLE_ERR | HCINT_DATATOGGLE_ERR | HCINT_ACK; } else { hcintmsk |= HCINT_NYET; - if (edpt->hcsplt_bm.split_en) { + if (edpt->hcsplt_bm.split_en || hctsiz & HCTSIZ_DOPING) { hcintmsk |= HCINT_ACK; } } @@ -973,10 +973,17 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t } else if (hcint & HCINT_ACK) { xfer->err_count = 0; channel->hcintmsk &= ~HCINT_ACK; - if (channel->hcsplt_bm.split_en && !channel->hcsplt_bm.split_compl) { - // start split is ACK --> do complete split - channel->hcsplt_bm.split_compl = 1; - channel->hcchar |= HCCHAR_CHENA; + if (channel->hcsplt_bm.split_en) { + if(!channel->hcsplt_bm.split_compl) { + // start split is ACK --> do complete split + channel->hcsplt_bm.split_compl = 1; + channel->hcchar |= HCCHAR_CHENA; + } + } else { + // Device is ready, resume transfer + edpt->do_ping = 0; + xfer->err_count = 0; + TU_ASSERT(channel_xfer_start(dwc2, ch_id)); } } -- cgit v1.3.1 From aecfd3433c6c235d632636f2936c7df180e9d12a Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 12 Apr 2025 13:36:10 +0200 Subject: Fix handle_hprt_irq Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index f3dc23b9c..3acdf580d 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -1290,10 +1290,10 @@ static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { */ static void handle_hprt_irq(uint8_t rhport, bool in_isr) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); - uint32_t hprt = dwc2->hprt & ~HPRT_W1_MASK; - const dwc2_hprt_t hprt_bm = {.value = hprt}; + const dwc2_hprt_t hprt_bm = {.value = dwc2->hprt}; + uint32_t hprt = hprt_bm.value & ~HPRT_W1_MASK; - if (dwc2->hprt & HPRT_CONN_DETECT) { + if (hprt_bm.conn_detected) { // Port Connect Detect hprt |= HPRT_CONN_DETECT; @@ -1304,7 +1304,7 @@ static void handle_hprt_irq(uint8_t rhport, bool in_isr) { } } - if (dwc2->hprt & HPRT_ENABLE_CHANGE) { + if (hprt_bm.enable_change) { // Port enable change hprt |= HPRT_ENABLE_CHANGE; -- cgit v1.3.1 From af0c47e06ec079ffa80ea55ff5de58c08ac1e750 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 12 Apr 2025 15:21:19 +0200 Subject: Fix typo Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 3acdf580d..8f1103415 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -543,7 +543,7 @@ static bool channel_xfer_start(dwc2_regs_t* dwc2, uint8_t ch_id) { hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; dwc2_channel_char_t* hcchar_bm = &edpt->hcchar_bm; dwc2_channel_t* channel = &dwc2->channel[ch_id]; - bool const is_period = channel_is_periodic(hcchar_bm->ep_type); + bool const is_period = channel_is_periodic(edpt->hcchar); // clear previous state xfer->fifo_bytes = 0; -- cgit v1.3.1 From d039d54a89d15b9d11f8f22f94279bedc8b28c09 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 14 Apr 2025 16:31:17 +0700 Subject: channge DWC2_CHANNEL_COUNT/DWC2_EP_COUNT to inline function --- hw/bsp/broadcom_32bit/family.cmake | 2 +- hw/bsp/broadcom_32bit/family.mk | 2 +- hw/bsp/broadcom_64bit/family.cmake | 2 +- hw/bsp/broadcom_64bit/family.mk | 2 +- src/portable/synopsys/dwc2/dcd_dwc2.c | 20 +- src/portable/synopsys/dwc2/dwc2_common.c | 2 +- src/portable/synopsys/dwc2/dwc2_type.h | 312 +++++++++++++++---------------- src/portable/synopsys/dwc2/hcd_dwc2.c | 15 +- 8 files changed, 182 insertions(+), 175 deletions(-) (limited to 'src/portable') diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index f1e8d12ff..5e57d8b1e 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -42,7 +42,7 @@ function(add_board_target BOARD_TARGET) -ffreestanding -mgeneral-regs-only -fno-exceptions - -std=gnu17 + -std=c17 ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR} diff --git a/hw/bsp/broadcom_32bit/family.mk b/hw/bsp/broadcom_32bit/family.mk index 6acdf1197..a282e9961 100644 --- a/hw/bsp/broadcom_32bit/family.mk +++ b/hw/bsp/broadcom_32bit/family.mk @@ -10,7 +10,7 @@ CFLAGS += \ -nostartfiles \ -mgeneral-regs-only \ -fno-exceptions \ - -std=gnu17 + -std=c17 CROSS_COMPILE = arm-none-eabi- diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index 16f8e1eae..1a088c2c0 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -43,7 +43,7 @@ function(add_board_target BOARD_TARGET) -ffreestanding -mgeneral-regs-only -fno-exceptions - -std=gnu17 + -std=c17 ) target_compile_definitions(${BOARD_TARGET} PUBLIC BCM_VERSION=${BCM_VERSION} diff --git a/hw/bsp/broadcom_64bit/family.mk b/hw/bsp/broadcom_64bit/family.mk index 92b5f69a3..37d381f9f 100644 --- a/hw/bsp/broadcom_64bit/family.mk +++ b/hw/bsp/broadcom_64bit/family.mk @@ -9,7 +9,7 @@ CFLAGS += \ -nostartfiles \ --specs=nosys.specs \ -mgeneral-regs-only \ - -std=gnu17 + -std=c17 CROSS_COMPILE = aarch64-none-elf- diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 83ebc18cb..52d675611 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -41,12 +41,6 @@ #include "device/dcd.h" #include "dwc2_common.h" -#if TU_CHECK_MCU(OPT_MCU_GD32VF103) - #define DWC2_EP_COUNT(_dwc2) DWC2_EP_MAX -#else - #define DWC2_EP_COUNT(_dwc2) ({const dwc2_ghwcfg2_t ghwcfg2 = {.value = (_dwc2)->ghwcfg2}; ghwcfg2.num_dev_ep + 1;}) -#endif - //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ @@ -79,6 +73,16 @@ CFG_TUD_MEM_SECTION static struct { TUD_EPBUF_DEF(setup_packet, 8); } _dcd_usbbuf; +TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_ep_count(const dwc2_regs_t* dwc2) { + #if TU_CHECK_MCU(OPT_MCU_GD32VF103) + return DWC2_EP_MAX; + #else + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + return ghwcfg2.num_dev_ep + 1; + #endif +} + + //-------------------------------------------------------------------- // DMA //-------------------------------------------------------------------- @@ -629,7 +633,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { // 7.4.1 Initialization on USB Reset static void handle_bus_reset(uint8_t rhport) { dwc2_regs_t *dwc2 = DWC2_REG(rhport); - const uint8_t ep_count = DWC2_EP_COUNT(dwc2); + const uint8_t ep_count = dwc2_ep_count(dwc2); tu_memclr(xfer_status, sizeof(xfer_status)); @@ -926,7 +930,7 @@ static void handle_epin_dma(uint8_t rhport, uint8_t epnum, dwc2_diepint_t diepin static void handle_ep_irq(uint8_t rhport, uint8_t dir) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); const bool is_dma = dma_device_enabled(dwc2); - const uint8_t ep_count = DWC2_EP_COUNT(dwc2); + const uint8_t ep_count = dwc2_ep_count(dwc2); const uint8_t daint_offset = (dir == TUSB_DIR_IN) ? DAINT_IEPINT_Pos : DAINT_OEPINT_Pos; dwc2_dep_t* ep_base = &dwc2->ep[dir == TUSB_DIR_IN ? 0 : 1][0]; diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index 989a833ff..f6ed8fc98 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -173,7 +173,6 @@ static bool check_dwc2(dwc2_regs_t* dwc2) { //-------------------------------------------------------------------- bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role) { (void)dwc2; - const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; #if CFG_TUD_ENABLED if (role == TUSB_ROLE_DEVICE && !TUD_OPT_HIGH_SPEED) { return false; @@ -185,6 +184,7 @@ bool dwc2_core_is_highspeed(dwc2_regs_t* dwc2, tusb_role_t role) { } #endif + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; return ghwcfg2.hs_phy_type != GHWCFG2_HSPHY_NOT_SUPPORTED; } diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 5ecf9d487..34e046346 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -299,17 +299,17 @@ TU_VERIFY_STATIC(sizeof(dwc2_gusbcfg_t) == 4, "incorrect size"); typedef union { uint32_t value; struct TU_ATTR_PACKED { - uint32_t core_soft_rst : 1; // 0 Core Soft Reset - uint32_t piufs_soft_rst : 1; // 1 PIU FS Dedicated Controller Soft Reset - uint32_t frame_counter_rst : 1; // 2 Frame Counter Reset (host) - uint32_t intoken_q_flush : 1; // 3 IN Token Queue Flush - uint32_t rx_fifo_flush : 1; // 4 RX FIFO Flush - uint32_t tx_fifo_flush : 1; // 5 TX FIFO Flush - uint32_t tx_fifo_num : 5; // 6..10 TX FIFO Number - uint32_t rsv11_28 :18; // 11..28 Reserved - uint32_t core_soft_rst_done : 1; // 29 Core Soft Reset Done, from v4.20a - uint32_t dma_req : 1; // 30 DMA Request - uint32_t ahb_idle : 1; // 31 AHB Idle + uint32_t core_soft_rst : 1; // 0 Core Soft Reset + uint32_t piufs_soft_rst : 1; // 1 PIU FS Dedicated Controller Soft Reset + uint32_t frame_counter_rst : 1; // 2 Frame Counter Reset (host) + uint32_t intoken_q_flush : 1; // 3 IN Token Queue Flush + uint32_t rx_fifo_flush : 1; // 4 RX FIFO Flush + uint32_t tx_fifo_flush : 1; // 5 TX FIFO Flush + uint32_t tx_fifo_num : 5; // 6..10 TX FIFO Number + uint32_t rsv11_28 :18; // 11..28 Reserved + uint32_t core_soft_rst_done : 1; // 29 Core Soft Reset Done, from v4.20a + uint32_t dma_req : 1; // 30 DMA Request + uint32_t ahb_idle : 1; // 31 AHB Idle }; } dwc2_grstctl_t; TU_VERIFY_STATIC(sizeof(dwc2_grstctl_t) == 4, "incorrect size"); @@ -317,12 +317,12 @@ TU_VERIFY_STATIC(sizeof(dwc2_grstctl_t) == 4, "incorrect size"); typedef union { uint32_t value; struct TU_ATTR_PACKED { - uint32_t ep_ch_num : 4; // 0..3 Endpoint/Channel Number - uint32_t byte_count :11; // 4..14 Byte Count - uint32_t dpid : 2; // 15..16 Data PID - uint32_t packet_status : 4; // 17..20 Packet Status - uint32_t frame_number : 4; // 21..24 Frame Number - uint32_t rsv25_31 : 7; // 25..31 Reserved + uint32_t ep_ch_num : 4; // 0..3 Endpoint/Channel Number + uint32_t byte_count :11; // 4..14 Byte Count + uint32_t dpid : 2; // 15..16 Data PID + uint32_t packet_status : 4; // 17..20 Packet Status + uint32_t frame_number : 4; // 21..24 Frame Number + uint32_t rsv25_31 : 7; // 25..31 Reserved }; } dwc2_grxstsp_t; TU_VERIFY_STATIC(sizeof(dwc2_grxstsp_t) == 4, "incorrect size"); @@ -371,28 +371,28 @@ TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg3_t) == 4, "incorrect size"); typedef union { uint32_t value; struct TU_ATTR_PACKED { - uint32_t num_dev_period_in_ep : 4; // 0..3 Number of Device Periodic IN Endpoints - uint32_t partial_powerdown : 1; // 4 Partial Power Down Enabled - uint32_t ahb_freq_min : 1; // 5 1: minimum of AHB frequency is less than 60 MHz - uint32_t hibernation : 1; // 6 Hibernation feature is enabled - uint32_t extended_hibernation : 1; // 7 Extended Hibernation feature is enabled - uint32_t reserved8 : 1; // 8 Reserved - uint32_t enhanced_lpm_support1 : 1; // 9 Enhanced LPM Support1 - uint32_t service_interval_flow : 1; // 10 Service Interval flow is supported - uint32_t ipg_isoc_support : 1; // 11 Interpacket GAP ISO OUT worst-case is supported - uint32_t acg_support : 1; // 12 Active clock gating is supported - uint32_t enhanced_lpm_support : 1; // 13 Enhanced LPM Support - uint32_t phy_data_width : 2; // 14..15 0: 8 bits | 1: 16 bits | 2: 8/16 software selectable - uint32_t ctrl_ep_num : 4; // 16..19 Number of Device control endpoints in addition to EP0 - uint32_t iddg_filter : 1; // 20 IDDG Filter Enabled - uint32_t vbus_valid_filter : 1; // 21 VBUS Valid Filter Enabled - uint32_t a_valid_filter : 1; // 22 A Valid Filter Enabled - uint32_t b_valid_filter : 1; // 23 B Valid Filter Enabled - uint32_t session_end_filter : 1; // 24 Session End Filter Enabled - uint32_t dedicated_fifos : 1; // 25 Dedicated tx fifo for device IN Endpoint - uint32_t num_dev_in_eps : 4; // 26..29 Number of Device IN Endpoints including EP0 - uint32_t dma_desc_enabled : 1; // scatter/gather DMA configuration enabled - uint32_t dma_desc_dynamic : 1; // Dynamic scatter/gather DMA + uint32_t num_dev_period_in_ep : 4; // 0..3 Number of Device Periodic IN Endpoints + uint32_t partial_powerdown : 1; // 4 Partial Power Down Enabled + uint32_t ahb_freq_min : 1; // 5 1: minimum of AHB frequency is less than 60 MHz + uint32_t hibernation : 1; // 6 Hibernation feature is enabled + uint32_t extended_hibernation : 1; // 7 Extended Hibernation feature is enabled + uint32_t reserved8 : 1; // 8 Reserved + uint32_t enhanced_lpm_support1 : 1; // 9 Enhanced LPM Support1 + uint32_t service_interval_flow : 1; // 10 Service Interval flow is supported + uint32_t ipg_isoc_support : 1; // 11 Interpacket GAP ISO OUT worst-case is supported + uint32_t acg_support : 1; // 12 Active clock gating is supported + uint32_t enhanced_lpm_support : 1; // 13 Enhanced LPM Support + uint32_t phy_data_width : 2; // 14..15 0: 8 bits | 1: 16 bits | 2: 8/16 software selectable + uint32_t ctrl_ep_num : 4; // 16..19 Number of Device control endpoints in addition to EP0 + uint32_t iddg_filter : 1; // 20 IDDG Filter Enabled + uint32_t vbus_valid_filter : 1; // 21 VBUS Valid Filter Enabled + uint32_t a_valid_filter : 1; // 22 A Valid Filter Enabled + uint32_t b_valid_filter : 1; // 23 B Valid Filter Enabled + uint32_t session_end_filter : 1; // 24 Session End Filter Enabled + uint32_t dedicated_fifos : 1; // 25 Dedicated tx fifo for device IN Endpoint + uint32_t num_dev_in_eps : 4; // 26..29 Number of Device IN Endpoints including EP0 + uint32_t dma_desc_enabled : 1; // scatter/gather DMA configuration enabled + uint32_t dma_desc_dynamic : 1; // Dynamic scatter/gather DMA }; } dwc2_ghwcfg4_t; TU_VERIFY_STATIC(sizeof(dwc2_ghwcfg4_t) == 4, "incorrect size"); @@ -402,7 +402,7 @@ typedef union { struct TU_ATTR_PACKED { uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO uint32_t req_queue_available : 8; // 16..23 Number of spaces available in the NPT transmit request queue for both IN and OU - // 24..31 is top entry in the request queue that is currently being processed by the MAC + // 24..31 is top entry in the request queue that is currently being processed by the MAC uint32_t qtop_terminate : 1; // 24 Last entry for selected channel uint32_t qtop_type : 2; // 25..26 Token (0) In/Out (1) ZLP, (2) Ping/cspit, (3) Channel halt command uint32_t qtop_ch_num : 4; // 27..30 Channel number @@ -413,7 +413,7 @@ TU_VERIFY_STATIC(sizeof(dwc2_hnptxsts_t) == 4, "incorrect size"); typedef union { uint32_t value; struct TU_ATTR_PACKED { - uint32_t fifo_available : 16; // 0..15 Number of words available in the Tx FIFO + uint32_t fifo_available :16; // 0..15 Number of words available in the Tx FIFO uint32_t req_queue_available : 7; // 16..22 Number of spaces available in the PTX transmit request queue uint32_t qtop_terminate : 1; // 23 Last entry for selected channel uint32_t qtop_last_period : 1; // 24 Last entry for selected channel is a periodic entry @@ -467,12 +467,12 @@ TU_VERIFY_STATIC(sizeof(dwc2_channel_char_t) == 4, "incorrect size"); typedef union { uint32_t value; struct TU_ATTR_PACKED { - uint32_t hub_port : 7; // 0..6 Hub port number - uint32_t hub_addr : 7; // 7..13 Hub address - uint32_t xact_pos : 2; // 14..15 Transaction position - uint32_t split_compl : 1; // 16 Split completion - uint32_t rsv17_30 : 14; // 17..30 Reserved - uint32_t split_en : 1; // 31 Split enable + uint32_t hub_port : 7; // 0..6 Hub port number + uint32_t hub_addr : 7; // 7..13 Hub address + uint32_t xact_pos : 2; // 14..15 Transaction position + uint32_t split_compl : 1; // 16 Split completion + uint32_t rsv17_30 : 14; // 17..30 Reserved + uint32_t split_en : 1; // 31 Split enable }; } dwc2_channel_split_t; TU_VERIFY_STATIC(sizeof(dwc2_channel_split_t) == 4, "incorrect size"); @@ -480,10 +480,10 @@ TU_VERIFY_STATIC(sizeof(dwc2_channel_split_t) == 4, "incorrect size"); typedef union { uint32_t value; struct TU_ATTR_PACKED { - uint32_t xfer_size : 19; // 0..18 Transfer size in bytes - uint32_t packet_count : 10; // 19..28 Number of packets - uint32_t pid : 2; // 29..30 Packet ID - uint32_t do_ping : 1; // 31 Do PING + uint32_t xfer_size : 19; // 0..18 Transfer size in bytes + uint32_t packet_count : 10; // 19..28 Number of packets + uint32_t pid : 2; // 29..30 Packet ID + uint32_t do_ping : 1; // 31 Do PING }; } dwc2_channel_tsize_t; TU_VERIFY_STATIC(sizeof(dwc2_channel_tsize_t) == 4, "incorrect size"); @@ -499,14 +499,14 @@ TU_VERIFY_STATIC(sizeof(dwc2_hfnum_t) == 4, "incorrect size"); // Host Channel typedef struct { - volatile uint32_t hcchar; // 500 + 20*ch Host Channel Characteristics - volatile uint32_t hcsplt; // 504 + 20*ch Host Channel Split Control - volatile uint32_t hcint; // 508 + 20*ch Host Channel Interrupt - volatile uint32_t hcintmsk; // 50C + 20*ch Host Channel Interrupt Mask - volatile uint32_t hctsiz; // 510 + 20*ch Host Channel Transfer Size - volatile uint32_t hcdma; // 514 + 20*ch Host Channel DMA Address - uint32_t reserved518; // 518 + 20*ch - volatile uint32_t hcdmab; // 51C + 20*ch Host Channel DMA Address + volatile uint32_t hcchar; // 500 + 20*ch Host Channel Characteristics + volatile uint32_t hcsplt; // 504 + 20*ch Host Channel Split Control + volatile uint32_t hcint; // 508 + 20*ch Host Channel Interrupt + volatile uint32_t hcintmsk; // 50C + 20*ch Host Channel Interrupt Mask + volatile uint32_t hctsiz; // 510 + 20*ch Host Channel Transfer Size + volatile uint32_t hcdma; // 514 + 20*ch Host Channel DMA Address + uint32_t reserved518; // 518 + 20*ch + volatile uint32_t hcdmab; // 51C + 20*ch Host Channel DMA Address } dwc2_channel_t; //-------------------------------------------------------------------- @@ -565,7 +565,7 @@ typedef union { uint32_t enum_speed : 2; // 1..2 Enumerated speed uint32_t erratic_err : 1; // 3 Erratic error uint32_t rsv4_7 : 4; // 4..7 Reserved - uint32_t frame_number : 14; // 8..21 Frame/MicroFrame number + uint32_t frame_number :14; // 8..21 Frame/MicroFrame number uint32_t line_status : 2; // 22..23 Line status uint32_t rsv24_31 : 8; // 24..31 Reserved }; @@ -620,23 +620,23 @@ TU_VERIFY_STATIC(sizeof(dwc2_depctl_t) == 4, "incorrect size"); typedef union { uint32_t value; struct TU_ATTR_PACKED { - uint32_t xfer_complete : 1; // 0 Transfer complete - uint32_t disabled : 1; // 1 Endpoint disabled - uint32_t ahb_err : 1; // 2 AHB error - uint32_t setup_phase_done : 1; // 3 Setup phase done - uint32_t out_rx_ep_disabled : 1; // 4 OUT token received when endpoint disabled - uint32_t status_phase_rx : 1; // 5 Status phase received - uint32_t setup_b2b : 1; // 6 Setup packet back-to-back - uint32_t rsv7 : 1; // 7 Reserved - uint32_t out_packet_err : 1; // 8 OUT packet error - uint32_t bna : 1; // 9 Buffer not available - uint32_t rsv10 : 1; // 10 Reserved - uint32_t iso_packet_drop : 1; // 11 Isochronous OUT packet drop status - uint32_t babble_err : 1; // 12 Babble error - uint32_t nak : 1; // 13 NAK - uint32_t nyet : 1; // 14 NYET - uint32_t setup_packet_rx : 1; // 15 Setup packet received (Buffer DMA Mode only) - uint32_t rsv16_31 :16; // 16..31 Reserved + uint32_t xfer_complete : 1; // 0 Transfer complete + uint32_t disabled : 1; // 1 Endpoint disabled + uint32_t ahb_err : 1; // 2 AHB error + uint32_t setup_phase_done : 1; // 3 Setup phase done + uint32_t out_rx_ep_disabled : 1; // 4 OUT token received when endpoint disabled + uint32_t status_phase_rx : 1; // 5 Status phase received + uint32_t setup_b2b : 1; // 6 Setup packet back-to-back + uint32_t rsv7 : 1; // 7 Reserved + uint32_t out_packet_err : 1; // 8 OUT packet error + uint32_t bna : 1; // 9 Buffer not available + uint32_t rsv10 : 1; // 10 Reserved + uint32_t iso_packet_drop : 1; // 11 Isochronous OUT packet drop status + uint32_t babble_err : 1; // 12 Babble error + uint32_t nak : 1; // 13 NAK + uint32_t nyet : 1; // 14 NYET + uint32_t setup_packet_rx : 1; // 15 Setup packet received (Buffer DMA Mode only) + uint32_t rsv16_31 :16; // 16..31 Reserved }; } dwc2_doepint_t; TU_VERIFY_STATIC(sizeof(dwc2_doepint_t) == 4, "incorrect size"); @@ -684,17 +684,17 @@ TU_VERIFY_STATIC(sizeof(dwc2_dep_t) == 0x20, "incorrect size"); // CSR Register Map //-------------------------------------------------------------------- typedef struct { - //------------- Core Global -------------// - volatile uint32_t gotgctl; // 000 OTG Control and Status - volatile uint32_t gotgint; // 004 OTG Interrupt - volatile uint32_t gahbcfg; // 008 AHB Configuration - volatile uint32_t gusbcfg; // 00c USB Configuration - volatile uint32_t grstctl; // 010 Reset - volatile uint32_t gintsts; // 014 Interrupt - volatile uint32_t gintmsk; // 018 Interrupt Mask - volatile uint32_t grxstsr; // 01c Receive Status Debug Read - volatile uint32_t grxstsp; // 020 Receive Status Read/Pop - volatile uint32_t grxfsiz; // 024 Receive FIFO Size + //------------- Core Global ------------- + volatile uint32_t gotgctl; // 000 OTG Control and Status + volatile uint32_t gotgint; // 004 OTG Interrupt + volatile uint32_t gahbcfg; // 008 AHB Configuration + volatile uint32_t gusbcfg; // 00c USB Configuration + volatile uint32_t grstctl; // 010 Reset + volatile uint32_t gintsts; // 014 Interrupt + volatile uint32_t gintmsk; // 018 Interrupt Mask + volatile uint32_t grxstsr; // 01c Receive Status Debug Read + volatile uint32_t grxstsp; // 020 Receive Status Read/Pop + volatile uint32_t grxfsiz; // 024 Receive FIFO Size union { volatile uint32_t dieptxf0; // 028 EP0 Tx FIFO Size volatile uint32_t gnptxfsiz; // 028 Non-periodic Transmit FIFO Size @@ -703,89 +703,89 @@ typedef struct { volatile uint32_t hnptxsts; // 02c Non-periodic Transmit FIFO/Queue Status volatile uint32_t gnptxsts; }; - volatile uint32_t gi2cctl; // 030 I2C Address - volatile uint32_t gpvndctl; // 034 PHY Vendor Control + volatile uint32_t gi2cctl; // 030 I2C Address + volatile uint32_t gpvndctl; // 034 PHY Vendor Control union { volatile uint32_t ggpio; // 038 General Purpose IO volatile uint32_t stm32_gccfg; // 038 STM32 General Core Configuration }; - volatile uint32_t guid; // 03C User (Application programmable) ID - volatile uint32_t gsnpsid; // 040 Synopsys ID + Release version - volatile uint32_t ghwcfg1; // 044 User Hardware Configuration1: endpoint dir (2 bit per ep) - volatile uint32_t ghwcfg2; // 048 User Hardware Configuration2 - volatile uint32_t ghwcfg3; // 04C User Hardware Configuration3 + volatile uint32_t guid; // 03C User (Application programmable) ID + volatile uint32_t gsnpsid; // 040 Synopsys ID + Release version + volatile uint32_t ghwcfg1; // 044 User Hardware Configuration1: endpoint dir (2 bit per ep) + volatile uint32_t ghwcfg2; // 048 User Hardware Configuration2 + volatile uint32_t ghwcfg3; // 04C User Hardware Configuration3 union { volatile uint32_t ghwcfg4; // 050 User Hardware Configuration4 volatile dwc2_ghwcfg4_t ghwcfg4_bm; }; - volatile uint32_t glpmcfg; // 054 Core LPM Configuration - volatile uint32_t gpwrdn; // 058 Power Down - volatile uint32_t gdfifocfg; // 05C DFIFO Software Configuration - volatile uint32_t gadpctl; // 060 ADP Timer, Control and Status - uint32_t reserved64[39]; // 064..0FF - volatile uint32_t hptxfsiz; // 100 Host Periodic Tx FIFO Size - volatile uint32_t dieptxf[15]; // 104..13C Device Periodic Transmit FIFO Size - uint32_t reserved140[176]; // 140..3FF - - //------------ Host -------------// - volatile uint32_t hcfg; // 400 Host Configuration - volatile uint32_t hfir; // 404 Host Frame Interval - volatile uint32_t hfnum; // 408 Host Frame Number / Frame Remaining - uint32_t reserved40c; // 40C - volatile uint32_t hptxsts; // 410 Host Periodic TX FIFO / Queue Status - volatile uint32_t haint; // 414 Host All Channels Interrupt - volatile uint32_t haintmsk; // 418 Host All Channels Interrupt Mask - volatile uint32_t hflbaddr; // 41C Host Frame List Base Address - uint32_t reserved420[8]; // 420..43F - volatile uint32_t hprt; // 440 Host Port Control and Status - uint32_t reserved444[47]; // 444..4FF - - //------------- Host Channel -------------// - dwc2_channel_t channel[16]; // 500..6FF Host Channels 0-15 - uint32_t reserved700[64]; // 700..7FF - - //------------- Device -----------// - volatile uint32_t dcfg; // 800 Device Configuration - volatile uint32_t dctl; // 804 Device Control - volatile uint32_t dsts; // 808 Device Status (RO) - uint32_t reserved80c; // 80C - volatile uint32_t diepmsk; // 810 Device IN Endpoint Interrupt Mask - volatile uint32_t doepmsk; // 814 Device OUT Endpoint Interrupt Mask - volatile uint32_t daint; // 818 Device All Endpoints Interrupt - volatile uint32_t daintmsk; // 81C Device All Endpoints Interrupt Mask - volatile uint32_t dtknqr1; // 820 Device IN token sequence learning queue read1 - volatile uint32_t dtknqr2; // 824 Device IN token sequence learning queue read2 - volatile uint32_t dvbusdis; // 828 Device VBUS Discharge Time - volatile uint32_t dvbuspulse; // 82C Device VBUS Pulsing Time - volatile uint32_t dthrctl; // 830 Device threshold Control - volatile uint32_t diepempmsk; // 834 Device IN Endpoint FIFO Empty Interrupt Mask - - // Device Each Endpoint (IN/OUT) Interrupt/Mask for generating dedicated EP interrupt line - // require OTG_MULTI_PROC_INTRPT=1 - volatile uint32_t deachint; // 838 Device Each Endpoint Interrupt - volatile uint32_t deachmsk; // 83C Device Each Endpoint Interrupt mask - volatile uint32_t diepeachmsk[16]; // 840..87C Device Each IN Endpoint mask - volatile uint32_t doepeachmsk[16]; // 880..8BF Device Each OUT Endpoint mask - uint32_t reserved8c0[16]; // 8C0..8FF - - //------------- Device Endpoint -------------// + volatile uint32_t glpmcfg; // 054 Core LPM Configuration + volatile uint32_t gpwrdn; // 058 Power Down + volatile uint32_t gdfifocfg; // 05C DFIFO Software Configuration + volatile uint32_t gadpctl; // 060 ADP Timer, Control and Status + uint32_t reserved64[39]; // 064..0FF + volatile uint32_t hptxfsiz; // 100 Host Periodic Tx FIFO Size + volatile uint32_t dieptxf[15]; // 104..13C Device Periodic Transmit FIFO Size + uint32_t reserved140[176]; // 140..3FF + + //------------ Host ------------- + volatile uint32_t hcfg; // 400 Host Configuration + volatile uint32_t hfir; // 404 Host Frame Interval + volatile uint32_t hfnum; // 408 Host Frame Number / Frame Remaining + uint32_t reserved40c; // 40C + volatile uint32_t hptxsts; // 410 Host Periodic TX FIFO / Queue Status + volatile uint32_t haint; // 414 Host All Channels Interrupt + volatile uint32_t haintmsk; // 418 Host All Channels Interrupt Mask + volatile uint32_t hflbaddr; // 41C Host Frame List Base Address + uint32_t reserved420[8]; // 420..43F + volatile uint32_t hprt; // 440 Host Port Control and Status + uint32_t reserved444[47]; // 444..4FF + + //------------- Host Channel -------- + dwc2_channel_t channel[16]; // 500..6FF Host Channels 0-15 + uint32_t reserved700[64]; // 700..7FF + + //------------- Device ----------- + volatile uint32_t dcfg; // 800 Device Configuration + volatile uint32_t dctl; // 804 Device Control + volatile uint32_t dsts; // 808 Device Status (RO) + uint32_t reserved80c; // 80C + volatile uint32_t diepmsk; // 810 Device IN Endpoint Interrupt Mask + volatile uint32_t doepmsk; // 814 Device OUT Endpoint Interrupt Mask + volatile uint32_t daint; // 818 Device All Endpoints Interrupt + volatile uint32_t daintmsk; // 81C Device All Endpoints Interrupt Mask + volatile uint32_t dtknqr1; // 820 Device IN token sequence learning queue read1 + volatile uint32_t dtknqr2; // 824 Device IN token sequence learning queue read2 + volatile uint32_t dvbusdis; // 828 Device VBUS Discharge Time + volatile uint32_t dvbuspulse; // 82C Device VBUS Pulsing Time + volatile uint32_t dthrctl; // 830 Device threshold Control + volatile uint32_t diepempmsk; // 834 Device IN Endpoint FIFO Empty Interrupt Mask + + // Device Each Endpoint (IN/OUT) Interrupt/Mask for generating dedicated EP interrupt line require + // OTG_MULTI_PROC_INTRPT=1 + volatile uint32_t deachint; // 838 Device Each Endpoint Interrupt + volatile uint32_t deachmsk; // 83C Device Each Endpoint Interrupt mask + volatile uint32_t diepeachmsk[16]; // 840..87C Device Each IN Endpoint mask + volatile uint32_t doepeachmsk[16]; // 880..8BF Device Each OUT Endpoint mask + uint32_t reserved8c0[16]; // 8C0..8FF + + //------------- Device Endpoint ----- union { - dwc2_dep_t ep[2][16]; // 0: IN, 1 OUT + dwc2_dep_t ep[2][16]; // 0: IN, 1 OUT struct { - dwc2_dep_t epin[16]; // 900..AFF IN Endpoints - dwc2_dep_t epout[16]; // B00..CFF OUT Endpoints + dwc2_dep_t epin[16]; // 900..AFF IN Endpoints + dwc2_dep_t epout[16]; // B00..CFF OUT Endpoints }; }; - uint32_t reservedd00[64]; // D00..DFF + uint32_t reservedd00[64]; // D00..DFF - //------------- Power Clock -------------// - volatile uint32_t pcgcctl; // E00 Power and Clock Gating Characteristic Control - volatile uint32_t pcgcctl1; // E04 Power and Clock Gating Characteristic Control 1 - uint32_t reservede08[126]; // E08..FFF + //------------- Power Clock --------- + volatile uint32_t pcgcctl; // E00 Power and Clock Gating Characteristic Control + volatile uint32_t pcgcctl1; // E04 Power and Clock Gating Characteristic Control 1 + uint32_t reservede08[126]; // E08..FFF - //------------- FIFOs -------------// + //------------- FIFOs ------------- // Word-accessed only using first pointer since it auto shift - volatile uint32_t fifo[16][0x400]; // 1000..FFFF Endpoint FIFO + volatile uint32_t fifo[16][0x400]; // 1000..FFFF Endpoint FIFO } dwc2_regs_t; TU_VERIFY_STATIC(offsetof(dwc2_regs_t, hcfg ) == 0x0400, "incorrect size"); diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 8f1103415..8d565d174 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -44,8 +44,6 @@ #endif #define DWC2_CHANNEL_COUNT_MAX 16 // absolute max channel count -#define DWC2_CHANNEL_COUNT(_dwc2) ({const dwc2_ghwcfg2_t ghwcfg2 = {.value = (_dwc2)->ghwcfg2}; tu_min8(ghwcfg2.num_host_ch + 1, DWC2_CHANNEL_COUNT_MAX);}) - TU_VERIFY_STATIC(CFG_TUH_DWC2_ENDPOINT_MAX <= 255, "currently only use 8-bit for index"); enum { @@ -116,6 +114,11 @@ hcd_data_t _hcd_data; //-------------------------------------------------------------------- // //-------------------------------------------------------------------- +TU_ATTR_ALWAYS_INLINE static inline uint8_t dwc2_channel_count(const dwc2_regs_t* dwc2) { + const dwc2_ghwcfg2_t ghwcfg2 = {.value = dwc2->ghwcfg2}; + return tu_min8(ghwcfg2.num_host_ch + 1, DWC2_CHANNEL_COUNT_MAX); +} + TU_ATTR_ALWAYS_INLINE static inline tusb_speed_t hprt_speed_get(dwc2_regs_t* dwc2) { tusb_speed_t speed; const dwc2_hprt_t hprt = {.value = dwc2->hprt}; @@ -157,7 +160,7 @@ bool hcd_dcache_clean_invalidate(const void* addr, uint32_t data_size) { // Allocate a channel for new transfer TU_ATTR_ALWAYS_INLINE static inline uint8_t channel_alloc(dwc2_regs_t* dwc2) { - const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + const uint8_t max_channel = dwc2_channel_count(dwc2); for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; if (!xfer->allocated) { @@ -208,7 +211,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool channel_send_in_token(const dwc2_regs_t // Find currently enabled channel. Note: EP0 is bidirectional TU_ATTR_ALWAYS_INLINE static inline uint8_t channel_find_enabled(dwc2_regs_t* dwc2, uint8_t dev_addr, uint8_t ep_num, uint8_t ep_dir) { - const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + const uint8_t max_channel = dwc2_channel_count(dwc2); for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { if (_hcd_data.xfer[ch_id].allocated) { const dwc2_channel_char_t hcchar = {.value = dwc2->channel[ch_id].hcchar}; @@ -813,7 +816,7 @@ static bool handle_txfifo_empty(dwc2_regs_t* dwc2, bool is_periodic) { // Use period txsts for both p/np to get request queue space available (1-bit difference, it is small enough) const dwc2_hptxsts_t txsts = {.value = (is_periodic ? dwc2->hptxsts : dwc2->hnptxsts)}; - const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + const uint8_t max_channel = dwc2_channel_count(dwc2); for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { dwc2_channel_t* channel = &dwc2->channel[ch_id]; const dwc2_channel_char_t hcchar = {.value = channel->hcchar}; @@ -1168,7 +1171,7 @@ static bool handle_channel_out_dma(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hc static void handle_channel_irq(uint8_t rhport, bool in_isr) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); const bool is_dma = dma_host_enabled(dwc2); - const uint8_t max_channel = DWC2_CHANNEL_COUNT(dwc2); + const uint8_t max_channel = dwc2_channel_count(dwc2); for (uint8_t ch_id = 0; ch_id < max_channel; ch_id++) { if (tu_bit_test(dwc2->haint, ch_id)) { -- cgit v1.3.1 From 384e191fdc9346eb8718f1f3e50f4697f161cc88 Mon Sep 17 00:00:00 2001 From: Maxime Vincent Date: Thu, 10 Apr 2025 10:29:45 +0200 Subject: dwc2/host: immediately retry IN token for bInterval=1 Signed-off-by: Maxime Vincent --- src/portable/synopsys/dwc2/hcd_dwc2.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 33c0edba1..6e2737afd 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -736,6 +736,14 @@ static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci } } + // immediately retry if bInterval is 1 - otherwise we'd waste a microframe before retrying + if ((hcint & HCINT_HALTED) && (edpt->uframe_interval == 1)) { + edpt->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + channel->hcchar = (edpt->hcchar & ~HCCHAR_CHENA); + channel_send_in_token(dwc2, channel); + return; + } + // for periodic, de-allocate channel, enable SOF set frame counter for later transfer const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; edpt->next_pid = hctsiz.pid; // save PID -- cgit v1.3.1 From 62d06e7b19d82dbbc3d1089b249913c13eb7fc2a Mon Sep 17 00:00:00 2001 From: Maxime Vincent Date: Mon, 14 Apr 2025 09:24:54 +0200 Subject: dwc2/host: fix all retry intervals Signed-off-by: Maxime Vincent --- src/portable/synopsys/dwc2/hcd_dwc2.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 6e2737afd..d2070e57c 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -736,23 +736,22 @@ static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci } } - // immediately retry if bInterval is 1 - otherwise we'd waste a microframe before retrying - if ((hcint & HCINT_HALTED) && (edpt->uframe_interval == 1)) { - edpt->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame - channel->hcchar = (edpt->hcchar & ~HCCHAR_CHENA); - channel_send_in_token(dwc2, channel); - return; - } - - // for periodic, de-allocate channel, enable SOF set frame counter for later transfer - const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; - edpt->next_pid = hctsiz.pid; // save PID - edpt->uframe_countdown = edpt->uframe_interval; - dwc2->gintmsk |= GINTSTS_SOF; - if (hcint & HCINT_HALTED) { - // already halted, de-allocate channel (called from DMA isr) - channel_dealloc(dwc2, ch_id); + const uint32_t ucount = (hprt_speed_get(dwc2) == TUSB_SPEED_HIGH ? 1 : 8); + if (edpt->uframe_interval == ucount) { + // immediately retry if bInterval is 1 + edpt->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame + channel->hcchar = (edpt->hcchar & ~HCCHAR_CHENA); + channel_send_in_token(dwc2, channel); + } else { + // otherwise, de-allocate channel, enable SOF set frame counter for later transfer + const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; + edpt->next_pid = hctsiz.pid; // save PID + edpt->uframe_countdown = edpt->uframe_interval - ucount; + dwc2->gintmsk |= GINTSTS_SOF; + // already halted, de-allocate channel (called from DMA isr) + channel_dealloc(dwc2, ch_id); + } } else { // disable channel first if not halted (called slave isr) xfer->halted_sof_schedule = 1; -- cgit v1.3.1 From 0d2c08efd7145b160ab0ed373b2cf956699cfb74 Mon Sep 17 00:00:00 2001 From: Joel Michael Date: Wed, 16 Apr 2025 20:26:35 +1000 Subject: note potential issues using ep_desc in hcd_edpt_open() --- src/portable/template/hcd_template.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'src/portable') diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index b073d6057..694fa8550 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -116,6 +116,10 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { (void) rhport; (void) dev_addr; + + // NOTE: ep_desc is allocated on the stack when called from usbh_edpt_control_open() + // If you need to persist any ep_desc values across HCD calls (eg ep_desc->wMaxPacketSize), + // then you need to copy the data into another variable inside this function. (void) ep_desc; return false; -- cgit v1.3.1 From 713410997326269b4072dce906933f8f44fd0efe Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 18 Apr 2025 11:12:14 +0200 Subject: Update hcd_edpt_open() note. Signed-off-by: HiFiPhile --- src/portable/template/hcd_template.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index 694fa8550..fd870c91e 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -118,8 +118,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const (void) dev_addr; // NOTE: ep_desc is allocated on the stack when called from usbh_edpt_control_open() - // If you need to persist any ep_desc values across HCD calls (eg ep_desc->wMaxPacketSize), - // then you need to copy the data into another variable inside this function. + // You need to copy the data into a local variable who maintains the state of the endpoint and transfer. + // Check _hcd_data in hcd_dwc2.c for example. (void) ep_desc; return false; -- cgit v1.3.1 From 1b888a3311f1c722978d3bcb8ee0f5d5d4debd55 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 18 Apr 2025 16:17:35 +0700 Subject: clean up, remove halted_sof_schedule flags since channel_xfer_in_retry() is only called when channel is halted. --- src/portable/synopsys/dwc2/hcd_dwc2.c | 48 +++++++++++++++-------------------- 1 file changed, 20 insertions(+), 28 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index d2070e57c..a95cc5e10 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -95,7 +95,6 @@ typedef struct { uint8_t err_count : 3; uint8_t period_split_nyet_count : 3; uint8_t halted_nyet : 1; - uint8_t halted_sof_schedule : 1; }; uint8_t result; @@ -713,19 +712,21 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { //-------------------------------------------------------------------- // HCD Event Handler //-------------------------------------------------------------------- + +// retry an IN transfer, channel must be halted static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hcint) { hcd_xfer_t* xfer = &_hcd_data.xfer[ch_id]; - dwc2_channel_t* channel = &dwc2->channel[ch_id]; hcd_endpoint_t* edpt = &_hcd_data.edpt[xfer->ep_id]; + dwc2_channel_t* channel = &dwc2->channel[ch_id]; + dwc2_channel_char_t hcchar = {.value = channel->hcchar}; - if (channel_is_periodic(channel->hcchar)){ + if (channel_is_periodic(hcchar.value)){ const dwc2_channel_split_t hcsplt = {.value = channel->hcsplt}; // retry immediately for periodic split NYET if we haven't reach max retry if (hcsplt.split_en && hcsplt.split_compl && (hcint & HCINT_NYET || xfer->halted_nyet)) { xfer->period_split_nyet_count++; xfer->halted_nyet = 0; if (xfer->period_split_nyet_count < HCD_XFER_PERIOD_SPLIT_NYET_MAX) { - dwc2_channel_char_t hcchar = {.value = channel->hcchar}; hcchar.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame channel->hcchar = hcchar.value; channel_send_in_token(dwc2, channel); @@ -736,26 +737,20 @@ static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci } } - if (hcint & HCINT_HALTED) { - const uint32_t ucount = (hprt_speed_get(dwc2) == TUSB_SPEED_HIGH ? 1 : 8); - if (edpt->uframe_interval == ucount) { - // immediately retry if bInterval is 1 - edpt->hcchar_bm.odd_frame = 1 - (dwc2->hfnum & 1); // transfer on next frame - channel->hcchar = (edpt->hcchar & ~HCCHAR_CHENA); - channel_send_in_token(dwc2, channel); - } else { - // otherwise, de-allocate channel, enable SOF set frame counter for later transfer - const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; - edpt->next_pid = hctsiz.pid; // save PID - edpt->uframe_countdown = edpt->uframe_interval - ucount; - dwc2->gintmsk |= GINTSTS_SOF; - // already halted, de-allocate channel (called from DMA isr) - channel_dealloc(dwc2, ch_id); - } + const uint32_t ucount = (hprt_speed_get(dwc2) == TUSB_SPEED_HIGH ? 1 : 8); + if (edpt->uframe_interval == ucount) { + // retry on next frame if bInterval is 1 + hcchar.odd_frame = 1 - (dwc2->hfnum & 1); + channel->hcchar = hcchar.value; + channel_send_in_token(dwc2, channel); } else { - // disable channel first if not halted (called slave isr) - xfer->halted_sof_schedule = 1; - channel_disable(dwc2, channel); + // otherwise, de-allocate channel, enable SOF set frame counter for later transfer + const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; + edpt->next_pid = hctsiz.pid; // save PID + edpt->uframe_countdown = edpt->uframe_interval - ucount; + dwc2->gintmsk |= GINTSTS_SOF; + // already halted, de-allocate channel (called from DMA isr) + channel_dealloc(dwc2, ch_id); } } else { // for control/bulk: retry immediately @@ -905,7 +900,7 @@ static bool handle_channel_in_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t h xfer->halted_nyet = 1; channel_disable(dwc2, channel); } else if (hcint & HCINT_NAK) { - // NAK received, re-enable channel if request queue is available + // NAK received, disable channel to flush all posted request and try again if (hcsplt.split_en) { hcsplt.split_compl = 0; // restart with start-split channel->hcsplt = hcsplt.value; @@ -937,10 +932,7 @@ static bool handle_channel_in_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t h } } else if (hcint & HCINT_HALTED) { channel->hcintmsk &= ~HCINT_HALTED; - if (xfer->halted_sof_schedule) { - // de-allocate channel but does not complete xfer, we schedule it in the SOF interrupt - channel_dealloc(dwc2, ch_id); - } else if (xfer->result != XFER_RESULT_INVALID) { + if (xfer->result != XFER_RESULT_INVALID) { is_done = true; } else if (xfer->err_count == HCD_XFER_ERROR_MAX) { xfer->result = XFER_RESULT_FAILED; -- cgit v1.3.1 From b7a26cc33c793a3fc03ee54e27f48d276405af0d Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Fri, 18 Apr 2025 12:42:18 +0200 Subject: Fix 1st nak retry one frame shorter. Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 1 + 1 file changed, 1 insertion(+) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index a68455daa..be653fab0 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -748,6 +748,7 @@ static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; edpt->next_pid = hctsiz.pid; // save PID edpt->uframe_countdown = edpt->uframe_interval - ucount; + dwc2->gintsts = GINTSTS_SOF; // SOF flag is probably pending dwc2->gintmsk |= GINTSTS_SOF; // already halted, de-allocate channel (called from DMA isr) channel_dealloc(dwc2, ch_id); -- cgit v1.3.1 From 8111e53ff067ca3a55f06389e4571fd57554ae5a Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 18 Apr 2025 18:21:42 +0700 Subject: minor rename --- src/portable/synopsys/dwc2/hcd_dwc2.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 1238a68e0..e1035fa55 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -75,9 +75,9 @@ typedef struct { struct TU_ATTR_PACKED { uint32_t uframe_interval : 18; // micro-frame interval - uint32_t speed : 2; - uint32_t next_pid : 2; - uint32_t do_ping : 1; + uint32_t speed : 2; + uint32_t next_pid : 2; // PID for next transfer + uint32_t next_do_ping : 1; // Do PING for next transfer if possible (highspeed OUT) // uint32_t : 9; }; @@ -567,12 +567,12 @@ static bool channel_xfer_start(dwc2_regs_t* dwc2, uint8_t ch_id) { hctsiz.pid = edpt->next_pid; // next PID is set in transfer complete interrupt hctsiz.packet_count = packet_count; hctsiz.xfer_size = edpt->buflen; - if (edpt->do_ping && edpt->speed == TUSB_SPEED_HIGH && + if (edpt->next_do_ping && edpt->speed == TUSB_SPEED_HIGH && edpt->next_pid != HCTSIZ_PID_SETUP && hcchar_bm->ep_dir == TUSB_DIR_OUT) { hctsiz.do_ping = 1; } channel->hctsiz = hctsiz.value; - edpt->do_ping = 0; + edpt->next_do_ping = 0; // pre-calculate next PID based on packet count, adjusted in transfer complete interrupt if short packet if (hcchar_bm->ep_num == 0) { @@ -970,7 +970,7 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t channel->hcsplt = hcsplt.value; channel->hcchar |= HCCHAR_CHENA; } else { - edpt->do_ping = 1; + edpt->next_do_ping = 1; channel_xfer_out_wrapup(dwc2, ch_id); channel_disable(dwc2, channel); } @@ -983,7 +983,7 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t channel->hcintmsk |= HCINT_ACK; } else { // NAK disable channel to flush all posted request and try again - edpt->do_ping = 1; + edpt->next_do_ping = 1; xfer->err_count = 0; } } else if (hcint & HCINT_HALTED) { @@ -1009,7 +1009,7 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t } } else { // Device is ready, resume transfer - edpt->do_ping = 0; + edpt->next_do_ping = 0; xfer->err_count = 0; TU_ASSERT(channel_xfer_start(dwc2, ch_id)); } -- cgit v1.3.1 From d51863d1a006f01f9d4ab9e9863dd6c6fdf8f13b Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 18 Apr 2025 22:39:59 +0700 Subject: - correctly do_ping if received nyet as transfer complete e.g msc 31 byte command - correctly carry out OUT transfer when PING is ack --- src/portable/synopsys/dwc2/dwc2_type.h | 6 +++--- src/portable/synopsys/dwc2/hcd_dwc2.c | 14 +++++++++----- 2 files changed, 12 insertions(+), 8 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_type.h b/src/portable/synopsys/dwc2/dwc2_type.h index 34e046346..0a8dacf5f 100644 --- a/src/portable/synopsys/dwc2/dwc2_type.h +++ b/src/portable/synopsys/dwc2/dwc2_type.h @@ -2088,9 +2088,9 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo ) == 0x1000, "incorrect size"); #define HCTSIZ_DOPING_Pos (31U) #define HCTSIZ_DOPING_Msk (0x1UL << HCTSIZ_DOPING_Pos) // 0x80000000 #define HCTSIZ_DOPING HCTSIZ_DOPING_Msk // Do PING -#define HCTSIZ_PID_Pos (29U) -#define HCTSIZ_PID_Msk (0x3UL << HCTSIZ_PID_Pos) // 0x60000000 -#define HCTSIZ_PID HCTSIZ_PID_Msk // Data PID +#define HCTSIZ_PID_Pos (29U) +#define HCTSIZ_PID_Msk (0x3UL << HCTSIZ_PID_Pos) // 0x60000000 +#define HCTSIZ_PID HCTSIZ_PID_Msk // Data PID /******************** Bit definition for DIEPDMA register ********************/ #define DIEPDMA_DMAADDR_Pos (0U) diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index e1035fa55..1845c5e19 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -959,6 +959,10 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t is_done = true; xfer->result = XFER_RESULT_SUCCESS; channel->hcintmsk &= ~HCINT_ACK; + if (hcint & HCINT_NYET) { + // complete transfer with NYET, do ping next time + edpt->next_do_ping = 1; + } } else if (hcint & HCINT_STALL) { xfer->result = XFER_RESULT_STALLED; channel_disable(dwc2, channel); @@ -1002,16 +1006,16 @@ static bool handle_channel_out_slave(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t channel->hcintmsk &= ~HCINT_ACK; if (hcsplt.split_en) { if (!hcsplt.split_compl) { - // start split is ACK --> do complete split + // ACK for start split --> do complete split hcsplt.split_compl = 1; channel->hcsplt = hcsplt.value; channel->hcchar |= HCCHAR_CHENA; } } else { - // Device is ready, resume transfer - edpt->next_do_ping = 0; - xfer->err_count = 0; - TU_ASSERT(channel_xfer_start(dwc2, ch_id)); + // ACK interrupt is only enabled for Split and PING + // ACK for PING, which mean device is ready to receive data + channel->hctsiz &= ~HCTSIZ_DOPING; // HC already cleared PING bit, but we clear anyway + channel->hcchar |= HCCHAR_CHENA; } } -- cgit v1.3.1 From b3a9b6e37ffb21dba2f6da5fdd4ac5cd90c94442 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sat, 19 Apr 2025 11:43:28 +0200 Subject: enable SOF interrupt only if not already enabled Signed-off-by: HiFiPhile --- src/portable/synopsys/dwc2/hcd_dwc2.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index be653fab0..378c2742b 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -748,8 +748,11 @@ static void channel_xfer_in_retry(dwc2_regs_t* dwc2, uint8_t ch_id, uint32_t hci const dwc2_channel_tsize_t hctsiz = {.value = channel->hctsiz}; edpt->next_pid = hctsiz.pid; // save PID edpt->uframe_countdown = edpt->uframe_interval - ucount; - dwc2->gintsts = GINTSTS_SOF; // SOF flag is probably pending - dwc2->gintmsk |= GINTSTS_SOF; + // enable SOF interrupt if not already enabled + if (!(dwc2->gintmsk & GINTMSK_SOFM)) { + dwc2->gintsts = GINTSTS_SOF; + dwc2->gintmsk |= GINTMSK_SOFM; + } // already halted, de-allocate channel (called from DMA isr) channel_dealloc(dwc2, ch_id); } -- cgit v1.3.1 From 741cb3cf029e37682634eeb355c20420c0816c8d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 23 Apr 2025 12:35:32 +0700 Subject: rename hcd_devtree_info_t to tuh_bus_info_t, hcd_devtree_get_info to hcd_bus_info_get streamline bus info to usbh_devies, also replace dev0 (renamed to dev0_bus) --- .idea/debugServers/esp32s2.xml | 14 +++ .idea/debugServers/rp2350.xml | 2 +- .idea/debugServers/stm32f769.xml | 13 +++ .idea/debugServers/stm32h563.xml | 13 +++ .idea/debugServers/stm32h743.xml | 13 +++ examples/host/cdc_msc_hid/src/msc_app.c | 12 +-- src/host/hcd.h | 12 +-- src/host/usbh.c | 127 +++++++++++-------------- src/host/usbh_pvt.h | 2 +- src/portable/ehci/ehci.c | 10 +- src/portable/mentor/musb/hcd_musb.c | 24 ++--- src/portable/ohci/ohci.c | 6 +- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 6 +- src/portable/renesas/rusb2/hcd_rusb2.c | 6 +- src/portable/synopsys/dwc2/hcd_dwc2.c | 18 ++-- 15 files changed, 152 insertions(+), 126 deletions(-) create mode 100644 .idea/debugServers/esp32s2.xml create mode 100644 .idea/debugServers/stm32f769.xml create mode 100644 .idea/debugServers/stm32h563.xml create mode 100644 .idea/debugServers/stm32h743.xml (limited to 'src/portable') diff --git a/.idea/debugServers/esp32s2.xml b/.idea/debugServers/esp32s2.xml new file mode 100644 index 000000000..6a4aff3da --- /dev/null +++ b/.idea/debugServers/esp32s2.xml @@ -0,0 +1,14 @@ + + + + $USER_HOME$/.espressif/tools/xtensa-esp-elf-gdb/14.2_20240403/xtensa-esp-elf-gdb/bin/xtensa-esp32s2-elf-gdb + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/rp2350.xml b/.idea/debugServers/rp2350.xml index 5e092f3c4..52243a297 100644 --- a/.idea/debugServers/rp2350.xml +++ b/.idea/debugServers/rp2350.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/debugServers/stm32f769.xml b/.idea/debugServers/stm32f769.xml new file mode 100644 index 000000000..2fb322a0f --- /dev/null +++ b/.idea/debugServers/stm32f769.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/stm32h563.xml b/.idea/debugServers/stm32h563.xml new file mode 100644 index 000000000..9bf6db6e9 --- /dev/null +++ b/.idea/debugServers/stm32h563.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/.idea/debugServers/stm32h743.xml b/.idea/debugServers/stm32h743.xml new file mode 100644 index 000000000..63680b78c --- /dev/null +++ b/.idea/debugServers/stm32h743.xml @@ -0,0 +1,13 @@ + + + + + + + + + + + + + \ No newline at end of file diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index 1d7e18e6e..0e9c99766 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -30,13 +30,11 @@ //--------------------------------------------------------------------+ static scsi_inquiry_resp_t inquiry_resp; -bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; - if (csw->status != 0) - { + if (csw->status != 0) { printf("Inquiry failed\r\n"); return false; } @@ -55,16 +53,14 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da } //------------- IMPLEMENTATION -------------// -void tuh_msc_mount_cb(uint8_t dev_addr) -{ +void tuh_msc_mount_cb(uint8_t dev_addr) { printf("A MassStorage device is mounted\r\n"); uint8_t const lun = 0; tuh_msc_inquiry(dev_addr, lun, &inquiry_resp, inquiry_complete_cb, 0); } -void tuh_msc_umount_cb(uint8_t dev_addr) -{ +void tuh_msc_umount_cb(uint8_t dev_addr) { (void) dev_addr; printf("A MassStorage device is unmounted\r\n"); } diff --git a/src/host/hcd.h b/src/host/hcd.h index b20d96d54..1f2704a10 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -95,7 +95,7 @@ typedef struct { uint8_t hub_addr; uint8_t hub_port; uint8_t speed; -} hcd_devtree_info_t; +} tuh_bus_info_t; //--------------------------------------------------------------------+ // Memory API @@ -186,12 +186,8 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); // USBH implemented API //--------------------------------------------------------------------+ -// Get device tree information of a device -// USB device tree can be complicated and manged by USBH, this help HCD to retrieve -// needed topology info to carry out its work -extern void hcd_devtree_get_info(uint8_t dev_addr, hcd_devtree_info_t* devtree_info); - -//------------- Event API -------------// +// Get device port information +extern bool hcd_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info); // Called by HCD to notify stack extern void hcd_event_handler(hcd_event_t const* event, bool in_isr); @@ -239,4 +235,4 @@ void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, uint32_t xferred } #endif -#endif /* _TUSB_HCD_H_ */ +#endif diff --git a/src/host/usbh.c b/src/host/usbh.c index 0492fb2f2..c063c97f9 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -92,19 +92,7 @@ TU_ATTR_WEAK bool hcd_dcache_clean_invalidate(const void* addr, uint32_t data_si // USBH-HCD common data structure //--------------------------------------------------------------------+ typedef struct { - // port - uint8_t rhport; - uint8_t hub_addr; - uint8_t hub_port; - uint8_t speed; -} usbh_dev0_t; - -typedef struct { - // port, must be same layout as usbh_dev0_t - uint8_t rhport; - uint8_t hub_addr; - uint8_t hub_port; - uint8_t speed; + tuh_bus_info_t bus_info; // Device State struct TU_ATTR_PACKED { @@ -231,8 +219,8 @@ static usbh_class_driver_t const usbh_class_drivers[] = { enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; // Additional class drivers implemented by application -tu_static usbh_class_driver_t const * _app_driver = NULL; -tu_static uint8_t _app_driver_count = 0; +static usbh_class_driver_t const * _app_driver = NULL; +static uint8_t _app_driver_count = 0; #define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) @@ -255,9 +243,6 @@ static inline usbh_class_driver_t const *get_driver(uint8_t drv_id) { // sum of end device + hub #define TOTAL_DEVICES (CFG_TUH_DEVICE_MAX + CFG_TUH_HUB) -// Device with address = 0 for enumeration -static usbh_dev0_t _dev0; - // all devices excluding zero-address // hub address start from CFG_TUH_DEVICE_MAX+1 // TODO: hub can has its own simpler struct to save memory @@ -299,6 +284,8 @@ CFG_TUH_MEM_SECTION static usbh_epbuf_t _usbh_epbuf; typedef struct { uint8_t controller_id; // controller ID uint8_t enumerating_daddr; // device address of the device being enumerated + + tuh_bus_info_t dev0_bus; // bus info for dev0 in enumeration } usbh_data_t; static usbh_data_t _usbh_data = { @@ -353,9 +340,10 @@ bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t *vid, uint16_t *pid) { return true; } -tusb_speed_t tuh_speed_get(uint8_t dev_addr) { - usbh_device_t *dev = get_device(dev_addr); - return (tusb_speed_t) (dev ? get_device(dev_addr)->speed : _dev0.speed); +tusb_speed_t tuh_speed_get(uint8_t daddr) { + tuh_bus_info_t bus_info; + hcd_bus_info_get(daddr, &bus_info); + return bus_info.speed; } bool tuh_rhport_is_active(uint8_t rhport) { @@ -423,9 +411,9 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { } // Device - tu_memclr(&_dev0, sizeof(_dev0)); tu_memclr(_usbh_devices, sizeof(_usbh_devices)); tu_memclr(&_ctrl_xfer, sizeof(_ctrl_xfer)); + tu_memclr(&_usbh_data, sizeof(_usbh_data)); _usbh_data.controller_id = TUSB_INDEX_INVALID_8; _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; @@ -530,8 +518,8 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // due to the shared control buffer, we must fully complete enumerating one device first. // TODO better to have an separated queue for newly attached devices if (_usbh_data.enumerating_daddr != TUSB_INDEX_INVALID_8) { - if (event.rhport == _dev0.rhport && - event.connection.hub_addr == _dev0.hub_addr && event.connection.hub_port == _dev0.hub_port) { + if (event.rhport == _usbh_data.dev0_bus.rhport && + event.connection.hub_addr == _usbh_data.dev0_bus.hub_addr && event.connection.hub_port == _usbh_data.dev0_bus.hub_port) { // Some device can cause multiple duplicated attach events // drop current enumerating and start over for a proper port reset // abort/cancel current enumeration and start new one @@ -859,7 +847,7 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { const uint8_t dir = tu_edpt_dir(ep_addr); if (epnum == 0) { - // Also include dev0 for aborting enumerating + // Also include dev0_bus for aborting enumerating const uint8_t rhport = usbh_get_rhport(daddr); // control transfer: only 1 control at a time, check if we are aborting the current one @@ -871,7 +859,7 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { TU_VERIFY(dev); TU_VERIFY(dev->ep_status[epnum][dir].busy); // non-control skip if not busy - hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); + hcd_edpt_abort_xfer(dev->bus_info.rhport, daddr, ep_addr); // mark as ready and release endpoint if transfer is aborted dev->ep_status[epnum][dir].busy = false; @@ -885,9 +873,10 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { // USBH API For Class Driver //--------------------------------------------------------------------+ -uint8_t usbh_get_rhport(uint8_t dev_addr) { - usbh_device_t *dev = get_device(dev_addr); - return dev ? dev->rhport : _dev0.rhport; +uint8_t usbh_get_rhport(uint8_t daddr) { + tuh_bus_info_t bus_info; + hcd_bus_info_get(daddr, &bus_info); + return bus_info.rhport; } uint8_t *usbh_get_enum_buf(void) { @@ -972,7 +961,7 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t* bu dev->ep_callback[epnum][dir].user_data = user_data; #endif - if (hcd_edpt_xfer(dev->rhport, dev_addr, ep_addr, buffer, total_bytes)) { + if (hcd_edpt_xfer(dev->bus_info.rhport, dev_addr, ep_addr, buffer, total_bytes)) { TU_LOG_USBH("OK\r\n"); return true; } else { @@ -1024,19 +1013,14 @@ bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { // HCD Event Handler //--------------------------------------------------------------------+ -void hcd_devtree_get_info(uint8_t dev_addr, hcd_devtree_info_t* devtree_info) { - usbh_device_t const* dev = get_device(dev_addr); +bool hcd_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info) { + usbh_device_t const* dev = get_device(daddr); if (dev) { - devtree_info->rhport = dev->rhport; - devtree_info->hub_addr = dev->hub_addr; - devtree_info->hub_port = dev->hub_port; - devtree_info->speed = dev->speed; + *bus_info = dev->bus_info; } else { - devtree_info->rhport = _dev0.rhport; - devtree_info->hub_addr = _dev0.hub_addr; - devtree_info->hub_port = _dev0.hub_port; - devtree_info->speed = _dev0.speed; + *bus_info = _usbh_data.dev0_bus; } + return true; } TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) { @@ -1269,10 +1253,10 @@ TU_ATTR_ALWAYS_INLINE static inline bool is_hub_addr(uint8_t daddr) { // a device unplugged from rhport:hub_addr:hub_port static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port) { - // dev0 is unplugged - if ((_usbh_data.enumerating_daddr == 0) && (rhport == _dev0.rhport) && - (hub_addr == _dev0.hub_addr) && (hub_port == _dev0.hub_port)) { - hcd_device_close(_dev0.rhport, 0); + // dev0_bus is unplugged + if ((_usbh_data.enumerating_daddr == 0) && (rhport == _usbh_data.dev0_bus.rhport) && + (hub_addr == _usbh_data.dev0_bus.hub_addr) && (hub_port == _usbh_data.dev0_bus.hub_port)) { + hcd_device_close(_usbh_data.dev0_bus.rhport, 0); if (_ctrl_xfer.daddr == 0) { _control_set_xfer_stage(CONTROL_STAGE_IDLE); } @@ -1288,9 +1272,9 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu uint8_t const daddr = dev_id + 1; // hub_addr = 0 means roothub, hub_port = 0 means all devices of downstream hub - if (dev->rhport == rhport && dev->connected && - (hub_addr == 0 || dev->hub_addr == hub_addr) && - (hub_port == 0 || dev->hub_port == hub_port)) { + if (dev->bus_info.rhport == rhport && dev->connected && + (hub_addr == 0 || dev->bus_info.hub_addr == hub_addr) && + (hub_port == 0 || dev->bus_info.hub_port == hub_port)) { TU_LOG_USBH("[%u:%u:%u] unplugged address = %u\r\n", rhport, hub_addr, hub_port, daddr); if (is_hub_addr(daddr)) { @@ -1439,12 +1423,12 @@ static void process_enumeration(tuh_xfer_t* xfer) { return; } - _dev0.speed = (port_status.status.high_speed) ? TUSB_SPEED_HIGH : + _usbh_data.dev0_bus.speed = (port_status.status.high_speed) ? TUSB_SPEED_HIGH : (port_status.status.low_speed) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL; // Acknowledge Port Reset Change if (port_status.change.reset) { - hub_port_clear_reset_change(_dev0.hub_addr, _dev0.hub_port, + hub_port_clear_reset_change(_usbh_data.dev0_bus.hub_addr, _usbh_data.dev0_bus.hub_port, process_enumeration, ENUM_ADDR0_DEVICE_DESC); } break; @@ -1452,7 +1436,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { case ENUM_HUB_GET_STATUS_2: tusb_time_delay_ms_api(ENUM_RESET_DELAY_MS); - TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_epbuf.ctrl, + TU_ASSERT(hub_port_get_status(_usbh_data.dev0_bus.hub_addr, _usbh_data.dev0_bus.hub_port, _usbh_epbuf.ctrl, process_enumeration, ENUM_HUB_CLEAR_RESET_2),); break; @@ -1462,7 +1446,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { // Acknowledge Port Reset Change if Reset Successful if (port_status.change.reset) { - TU_ASSERT(hub_port_clear_reset_change(_dev0.hub_addr, _dev0.hub_port, + TU_ASSERT(hub_port_clear_reset_change(_usbh_data.dev0_bus.hub_addr, _usbh_data.dev0_bus.hub_port, process_enumeration, ENUM_SET_ADDR),); } break; @@ -1495,7 +1479,7 @@ static void process_enumeration(tuh_xfer_t* xfer) { new_dev->addressed = 1; _usbh_data.enumerating_daddr = new_addr; - hcd_device_close(_dev0.rhport, 0); // close dev0 + hcd_device_close(_usbh_data.dev0_bus.rhport, 0); // close dev0_bus TU_ASSERT(usbh_edpt_control_open(new_addr, new_dev->ep0_size),); // open new control endpoint @@ -1667,38 +1651,38 @@ static void process_enumeration(tuh_xfer_t* xfer) { } static bool enum_new_device(hcd_event_t* event) { - _dev0.rhport = event->rhport; - _dev0.hub_addr = event->connection.hub_addr; - _dev0.hub_port = event->connection.hub_port; + _usbh_data.dev0_bus.rhport = event->rhport; + _usbh_data.dev0_bus.hub_addr = event->connection.hub_addr; + _usbh_data.dev0_bus.hub_port = event->connection.hub_port; - if (_dev0.hub_addr == 0) { + if (_usbh_data.dev0_bus.hub_addr == 0) { // connected directly to roothub // wait until device connection is stable TODO non blocking tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); // device unplugged while delaying - if (!hcd_port_connect_status(_dev0.rhport)) { + if (!hcd_port_connect_status(_usbh_data.dev0_bus.rhport)) { enum_full_complete(); return true; } - hcd_port_reset(_dev0.rhport); // reset device + hcd_port_reset(_usbh_data.dev0_bus.rhport); // reset device // Since we are in middle of rhport reset, frame number is not available yet. // need to depend on tusb_time_millis_api() tusb_time_delay_ms_api(ENUM_RESET_DELAY_MS); - hcd_port_reset_end(_dev0.rhport); + hcd_port_reset_end(_usbh_data.dev0_bus.rhport); // device unplugged while delaying - if (!hcd_port_connect_status(_dev0.rhport)) { + if (!hcd_port_connect_status(_usbh_data.dev0_bus.rhport)) { enum_full_complete(); return true; } - _dev0.speed = hcd_port_speed_get(_dev0.rhport); - TU_LOG_USBH("%s Speed\r\n", tu_str_speed[_dev0.speed]); + _usbh_data.dev0_bus.speed = hcd_port_speed_get(_usbh_data.dev0_bus.rhport); + TU_LOG_USBH("%s Speed\r\n", tu_str_speed[_usbh_data.dev0.speed]); // fake transfer to kick-off the enumeration process tuh_xfer_t xfer; @@ -1715,7 +1699,7 @@ static bool enum_new_device(hcd_event_t* event) { tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); // ENUM_HUB_GET_STATUS - TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_epbuf.ctrl, + TU_ASSERT(hub_port_get_status(_usbh_data.dev0_bus.hub_addr, _usbh_data.dev0_bus.hub_port, _usbh_epbuf.ctrl, process_enumeration, ENUM_HUB_CLEAR_RESET_1)); } #endif // hub @@ -1749,10 +1733,7 @@ static bool enum_request_set_addr(tusb_desc_device_t const* desc_device) { TU_LOG_USBH("Set Address = %d\r\n", new_addr); usbh_device_t* new_dev = get_device(new_addr); - new_dev->rhport = _dev0.rhport; - new_dev->hub_addr = _dev0.hub_addr; - new_dev->hub_port = _dev0.hub_port; - new_dev->speed = _dev0.speed; + new_dev->bus_info = _usbh_data.dev0_bus; new_dev->connected = 1; new_dev->ep0_size = desc_device->bMaxPacketSize0; @@ -1768,7 +1749,7 @@ static bool enum_request_set_addr(tusb_desc_device_t const* desc_device) { .wLength = 0 }; tuh_xfer_t xfer = { - .daddr = 0, // dev0 + .daddr = 0, .ep_addr = 0, .setup = &request, .buffer = NULL, @@ -1841,7 +1822,7 @@ static bool enum_parse_configuration_desc(uint8_t dev_addr, tusb_desc_configurat // Find driver for this interface for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { usbh_class_driver_t const * driver = get_driver(drv_id); - if (driver && driver->open(dev->rhport, dev_addr, desc_itf, drv_len) ) { + if (driver && driver->open(dev->bus_info.rhport, dev_addr, desc_itf, drv_len) ) { // open successfully TU_LOG_USBH(" %s opened\r\n", driver->name); @@ -1860,9 +1841,9 @@ static bool enum_parse_configuration_desc(uint8_t dev_addr, tusb_desc_configurat break; // exit driver find loop } - if ( drv_id == TOTAL_DRIVER_COUNT - 1 ) { + if (drv_id == TOTAL_DRIVER_COUNT - 1) { TU_LOG_USBH("[%u:%u] Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", - dev->rhport, dev_addr, desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); + dev->bus_info.rhport, dev_addr, desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); } } @@ -1909,8 +1890,8 @@ static void enum_full_complete(void) { _usbh_data.enumerating_daddr = TUSB_INDEX_INVALID_8; #if CFG_TUH_HUB - if (_dev0.hub_addr) { - hub_edpt_status_xfer(_dev0.hub_addr); // get next hub status + if (_usbh_data.dev0_bus.hub_addr != 0) { + hub_edpt_status_xfer(_usbh_data.dev0_bus.hub_addr); // get next hub status } #endif diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index bfa1fb2ba..61b012493 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -63,7 +63,7 @@ usbh_class_driver_t const* usbh_app_driver_get_cb(uint8_t* driver_count) TU_ATTR // Call by class driver to tell USBH that it has complete the enumeration void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num); -uint8_t usbh_get_rhport(uint8_t dev_addr); +uint8_t usbh_get_rhport(uint8_t daddr); uint8_t* usbh_get_enum_buf(void); diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 7451f69a3..141a2c026 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -837,8 +837,8 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c tu_memclr(p_qhd, sizeof(ehci_qhd_t)); } - hcd_devtree_info_t devtree_info; - hcd_devtree_get_info(dev_addr, &devtree_info); + tuh_bus_info_t bus_info; + hcd_bus_info_get(dev_addr, &bus_info); uint8_t const xfer_type = ep_desc->bmAttributes.xfer; uint8_t const interval = ep_desc->bInterval; @@ -846,7 +846,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c p_qhd->dev_addr = dev_addr; p_qhd->fl_inactive_next_xact = 0; p_qhd->ep_number = tu_edpt_number(ep_desc->bEndpointAddress); - p_qhd->ep_speed = devtree_info.speed; + p_qhd->ep_speed = bus_info.speed; p_qhd->data_toggle_control= (xfer_type == TUSB_XFER_CONTROL) ? 1 : 0; p_qhd->head_list_flag = (dev_addr == 0) ? 1 : 0; // addr0's endpoint is the static async list head p_qhd->max_packet_size = tu_edpt_packet_size(ep_desc); @@ -887,8 +887,8 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c default: break; } - p_qhd->fl_hub_addr = devtree_info.hub_addr; - p_qhd->fl_hub_port = devtree_info.hub_port; + p_qhd->fl_hub_addr = bus_info.hub_addr; + p_qhd->fl_hub_port = bus_info.hub_port; p_qhd->mult = 1; // TODO not use high bandwidth/park mode yet //------------- HCD Management Data -------------// diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 811043d74..97ef46152 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -695,16 +695,16 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet _hcd.pipe0.length = 8; _hcd.pipe0.remaining = 0; - hcd_devtree_info_t devtree; - hcd_devtree_get_info(dev_addr, &devtree); - switch (devtree.speed) { + tuh_bus_info_t bus_info; + hcd_bus_info_get(dev_addr, &bus_info); + switch (bus_info.speed) { default: return false; case TUSB_SPEED_LOW: USB0->TYPE0 = USB_TYPE0_SPEED_LOW; break; case TUSB_SPEED_FULL: USB0->TYPE0 = USB_TYPE0_SPEED_FULL; break; case TUSB_SPEED_HIGH: USB0->TYPE0 = USB_TYPE0_SPEED_HIGH; break; } - USB0->TXHUBADDR0 = devtree.hub_addr; - USB0->TXHUBPORT0 = devtree.hub_port; + USB0->TXHUBADDR0 = bus_info.hub_addr; + USB0->TXHUBPORT0 = bus_info.hub_port; USB0->TXFUNCADDR0 = dev_addr; USB0->CSRL0 = USB_CSRL0_TXRDY | USB_CSRL0_SETUP; return true; @@ -744,9 +744,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const pipe->remaining = 0; uint8_t pipe_type = 0; - hcd_devtree_info_t devtree; - hcd_devtree_get_info(dev_addr, &devtree); - switch (devtree.speed) { + tuh_bus_info_t bus_info; + hcd_bus_info_get(dev_addr, &bus_info); + switch (bus_info.speed) { default: return false; case TUSB_SPEED_LOW: pipe_type |= USB_TXTYPE1_SPEED_LOW; break; case TUSB_SPEED_FULL: pipe_type |= USB_TXTYPE1_SPEED_FULL; break; @@ -763,8 +763,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const hw_endpoint_t volatile *regs = edpt_regs(pipenum - 1); if (dir_tx) { fadr->TXFUNCADDR = dev_addr; - fadr->TXHUBADDR = devtree.hub_addr; - fadr->TXHUBPORT = devtree.hub_port; + fadr->TXHUBADDR = bus_info.hub_addr; + fadr->TXHUBPORT = bus_info.hub_port; regs->TXMAXP = mps; regs->TXTYPE = pipe_type | epn; regs->TXINTERVAL = ep_desc->bInterval; @@ -775,8 +775,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const USB0->TXIE |= TU_BIT(pipenum); } else { fadr->RXFUNCADDR = dev_addr; - fadr->RXHUBADDR = devtree.hub_addr; - fadr->RXHUBPORT = devtree.hub_port; + fadr->RXHUBADDR = bus_info.hub_addr; + fadr->RXHUBPORT = bus_info.hub_port; regs->RXMAXP = mps; regs->RXTYPE = pipe_type | epn; regs->RXINTERVAL = ep_desc->bInterval; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 672ad0443..465b6731c 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -328,13 +328,13 @@ static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t tu_memclr(p_ed, sizeof(ohci_ed_t)); } - hcd_devtree_info_t devtree_info; - hcd_devtree_get_info(dev_addr, &devtree_info); + tuh_bus_info_t bus_info; + hcd_bus_info_get(dev_addr, &bus_info); p_ed->dev_addr = dev_addr; p_ed->ep_number = ep_addr & 0x0F; p_ed->pid = (xfer_type == TUSB_XFER_CONTROL) ? PID_FROM_TD : (tu_edpt_dir(ep_addr) ? PID_IN : PID_OUT); - p_ed->speed = devtree_info.speed; + p_ed->speed = bus_info.speed; p_ed->is_iso = (xfer_type == TUSB_XFER_ISOCHRONOUS) ? 1 : 0; p_ed->max_packet_size = ep_size; diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 225a44dcf..0e3d0d31a 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -114,9 +114,9 @@ void hcd_int_disable(uint8_t rhport) { //--------------------------------------------------------------------+ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const *desc_ep) { - hcd_devtree_info_t dev_tree; - hcd_devtree_get_info(dev_addr, &dev_tree); - bool const need_pre = (dev_tree.hub_addr && dev_tree.speed == TUSB_SPEED_LOW); + tuh_bus_info_t bus_info; + hcd_bus_info_get(dev_addr, &bus_info); + bool const need_pre = (bus_info.hub_addr && bus_info.speed == TUSB_SPEED_LOW); uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const *) desc_ep, need_pre); diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 3e4b36981..e6975287d 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -662,13 +662,13 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const if (0 == epn) { rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; - hcd_devtree_info_t devtree; - hcd_devtree_get_info(dev_addr, &devtree); + tuh_bus_info_t bus_info; + hcd_bus_info_get(dev_addr, &bus_info); uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t) &rusb->DEVADD[0]; devadd += dev_addr; while (rusb->DCPCTR_b.PBUSY) {} rusb->DCPMAXP = (dev_addr << 12) | mps; - *devadd = (TUSB_SPEED_FULL == devtree.speed) ? RUSB2_DEVADD_USBSPD_FS : RUSB2_DEVADD_USBSPD_LS; + *devadd = (TUSB_SPEED_FULL == bus_info.speed) ? RUSB2_DEVADD_USBSPD_FS : RUSB2_DEVADD_USBSPD_LS; _hcd.ctl_mps[dev_addr] = mps; return true; } diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 53bc0b059..6fd343686 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -475,8 +475,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t* dwc2_regs_t* dwc2 = DWC2_REG(rhport); const tusb_speed_t rh_speed = hprt_speed_get(dwc2); - hcd_devtree_info_t devtree_info; - hcd_devtree_get_info(dev_addr, &devtree_info); + tuh_bus_info_t bus_info; + hcd_bus_info_get(dev_addr, &bus_info); // find a free endpoint const uint8_t ep_id = edpt_alloc(); @@ -487,7 +487,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t* hcchar_bm->ep_size = tu_edpt_packet_size(desc_ep); hcchar_bm->ep_num = tu_edpt_number(desc_ep->bEndpointAddress); hcchar_bm->ep_dir = tu_edpt_dir(desc_ep->bEndpointAddress); - hcchar_bm->low_speed_dev = (devtree_info.speed == TUSB_SPEED_LOW) ? 1 : 0; + hcchar_bm->low_speed_dev = (bus_info.speed == TUSB_SPEED_LOW) ? 1 : 0; hcchar_bm->ep_type = desc_ep->bmAttributes.xfer; // ep_type matches TUSB_XFER_* hcchar_bm->err_multi_count = 0; hcchar_bm->dev_addr = dev_addr; @@ -496,21 +496,21 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t* hcchar_bm->enable = 1; dwc2_channel_split_t* hcsplt_bm = &edpt->hcsplt_bm; - hcsplt_bm->hub_port = devtree_info.hub_port; - hcsplt_bm->hub_addr = devtree_info.hub_addr; + hcsplt_bm->hub_port = bus_info.hub_port; + hcsplt_bm->hub_addr = bus_info.hub_addr; hcsplt_bm->xact_pos = 0; hcsplt_bm->split_compl = 0; - hcsplt_bm->split_en = (rh_speed == TUSB_SPEED_HIGH && devtree_info.speed != TUSB_SPEED_HIGH) ? 1 : 0; + hcsplt_bm->split_en = (rh_speed == TUSB_SPEED_HIGH && bus_info.speed != TUSB_SPEED_HIGH) ? 1 : 0; - edpt->speed = devtree_info.speed; + edpt->speed = bus_info.speed; edpt->next_pid = HCTSIZ_PID_DATA0; if (desc_ep->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) { edpt->uframe_interval = 1 << (desc_ep->bInterval - 1); - if (devtree_info.speed == TUSB_SPEED_FULL) { + if (bus_info.speed == TUSB_SPEED_FULL) { edpt->uframe_interval <<= 3; } } else if (desc_ep->bmAttributes.xfer == TUSB_XFER_INTERRUPT) { - if (devtree_info.speed == TUSB_SPEED_HIGH) { + if (bus_info.speed == TUSB_SPEED_HIGH) { edpt->uframe_interval = 1 << (desc_ep->bInterval - 1); } else { edpt->uframe_interval = desc_ep->bInterval << 3; -- cgit v1.3.1 From a2da575793a14fdfc5137a02843af0fd8f8b772a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 23 Apr 2025 16:03:40 +0700 Subject: rename and expose tuh_bus_info_get() to application --- src/host/hcd.h | 10 ---------- src/host/usbh.c | 10 +++++----- src/host/usbh.h | 14 +++++++++++++- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 1 + src/portable/ehci/ehci.c | 3 ++- src/portable/mentor/musb/hcd_musb.c | 5 +++-- src/portable/nxp/khci/hcd_khci.c | 1 + src/portable/nxp/lpc17_40/hcd_lpc17_40.c | 1 + src/portable/ohci/ohci.c | 3 ++- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 2 +- src/portable/renesas/rusb2/hcd_rusb2.c | 3 ++- src/portable/synopsys/dwc2/dwc2_common.c | 1 + src/portable/synopsys/dwc2/hcd_dwc2.c | 3 ++- src/portable/template/hcd_template.c | 1 + 14 files changed, 35 insertions(+), 23 deletions(-) (limited to 'src/portable') diff --git a/src/host/hcd.h b/src/host/hcd.h index 1f2704a10..d3551bf5b 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -90,13 +90,6 @@ typedef struct { }; } hcd_event_t; -typedef struct { - uint8_t rhport; - uint8_t hub_addr; - uint8_t hub_port; - uint8_t speed; -} tuh_bus_info_t; - //--------------------------------------------------------------------+ // Memory API //--------------------------------------------------------------------+ @@ -186,9 +179,6 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); // USBH implemented API //--------------------------------------------------------------------+ -// Get device port information -extern bool hcd_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info); - // Called by HCD to notify stack extern void hcd_event_handler(hcd_event_t const* event, bool in_isr); diff --git a/src/host/usbh.c b/src/host/usbh.c index c063c97f9..0a208816c 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -28,9 +28,9 @@ #if CFG_TUH_ENABLED -#include "host/hcd.h" +#include "hcd.h" #include "tusb.h" -#include "host/usbh_pvt.h" +#include "usbh_pvt.h" #include "hub.h" //--------------------------------------------------------------------+ @@ -342,7 +342,7 @@ bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t *vid, uint16_t *pid) { tusb_speed_t tuh_speed_get(uint8_t daddr) { tuh_bus_info_t bus_info; - hcd_bus_info_get(daddr, &bus_info); + tuh_bus_info_get(daddr, &bus_info); return bus_info.speed; } @@ -875,7 +875,7 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { uint8_t usbh_get_rhport(uint8_t daddr) { tuh_bus_info_t bus_info; - hcd_bus_info_get(daddr, &bus_info); + tuh_bus_info_get(daddr, &bus_info); return bus_info.rhport; } @@ -1013,7 +1013,7 @@ bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { // HCD Event Handler //--------------------------------------------------------------------+ -bool hcd_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info) { +bool tuh_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info) { usbh_device_t const* dev = get_device(daddr); if (dev) { *bus_info = dev->bus_info; diff --git a/src/host/usbh.h b/src/host/usbh.h index 4829a8183..063b20539 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -47,7 +47,6 @@ // forward declaration struct tuh_xfer_s; typedef struct tuh_xfer_s tuh_xfer_t; - typedef void (*tuh_xfer_cb_t)(tuh_xfer_t* xfer); // Note1: layout and order of this will be changed in near future @@ -80,6 +79,14 @@ typedef struct { tusb_desc_interface_t desc; } tuh_itf_info_t; +typedef struct { + uint8_t rhport; + uint8_t hub_addr; + uint8_t hub_port; + uint8_t speed; +} tuh_bus_info_t; + + // ConfigID for tuh_configure() enum { TUH_CFGID_INVALID = 0, @@ -177,6 +184,8 @@ extern void hcd_int_handler(uint8_t rhport, bool in_isr); #define _tuh_int_handler_arg0() TU_VERIFY_STATIC(false, "tuh_int_handler() must have 1 or 2 arguments") #define _tuh_int_handler_arg1(_rhport) hcd_int_handler(_rhport, true) #define _tuh_int_handler_arg2(_rhport, _in_isr) hcd_int_handler(_rhport, _in_isr) + +// 1st argument is rhport (mandatory), 2nd argument in_isr (optional) #define tuh_int_handler(...) TU_FUNC_OPTIONAL_ARG(_tuh_int_handler, __VA_ARGS__) // Check if roothub port is initialized and active as a host @@ -214,6 +223,9 @@ TU_ATTR_ALWAYS_INLINE static inline bool tuh_ready(uint8_t daddr) { return tuh_mounted(daddr) && !tuh_suspended(daddr); } +// Get bus information of device +bool tuh_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info); + //--------------------------------------------------------------------+ // Transfer API //--------------------------------------------------------------------+ diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index c4c342a70..22eb22690 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -35,6 +35,7 @@ //--------------------------------------------------------------------+ #include "common/tusb_common.h" #include "host/hcd.h" +#include "host/usbh.h" #include "portable/ehci/ehci_api.h" #include "ci_hs_type.h" diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 141a2c026..da9f49d29 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -34,6 +34,7 @@ #include "osal/osal.h" #include "host/hcd.h" +#include "host/usbh.h" #include "ehci_api.h" #include "ehci.h" @@ -838,7 +839,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c } tuh_bus_info_t bus_info; - hcd_bus_info_get(dev_addr, &bus_info); + tuh_bus_info_get(dev_addr, &bus_info); uint8_t const xfer_type = ep_desc->bmAttributes.xfer; uint8_t const interval = ep_desc->bInterval; diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 97ef46152..dcc023e0b 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -36,6 +36,7 @@ _Pragma("GCC diagnostic ignored \"-Waddress-of-packed-member\""); #endif #include "host/hcd.h" +#include "host/usbh.h" #include "musb_type.h" @@ -696,7 +697,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet _hcd.pipe0.remaining = 0; tuh_bus_info_t bus_info; - hcd_bus_info_get(dev_addr, &bus_info); + tuh_bus_info_get(dev_addr, &bus_info); switch (bus_info.speed) { default: return false; case TUSB_SPEED_LOW: USB0->TYPE0 = USB_TYPE0_SPEED_LOW; break; @@ -745,7 +746,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const uint8_t pipe_type = 0; tuh_bus_info_t bus_info; - hcd_bus_info_get(dev_addr, &bus_info); + tuh_bus_info_get(dev_addr, &bus_info); switch (bus_info.speed) { default: return false; case TUSB_SPEED_LOW: pipe_type |= USB_TXTYPE1_SPEED_LOW; break; diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index c3c901c5d..45732a866 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -36,6 +36,7 @@ #endif #include "host/hcd.h" +#include "host/usbh.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION diff --git a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c b/src/portable/nxp/lpc17_40/hcd_lpc17_40.c index 090d1ba69..fea3e2a66 100644 --- a/src/portable/nxp/lpc17_40/hcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/hcd_lpc17_40.c @@ -31,6 +31,7 @@ #include "chip.h" #include "host/hcd.h" +#include "host/usbh.h" void hcd_int_enable(uint8_t rhport) { diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 465b6731c..81091c9a7 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -38,6 +38,7 @@ #include "osal/osal.h" #include "host/hcd.h" +#include "host/usbh.h" #include "ohci.h" // TODO remove @@ -329,7 +330,7 @@ static void ed_init(ohci_ed_t *p_ed, uint8_t dev_addr, uint16_t ep_size, uint8_t } tuh_bus_info_t bus_info; - hcd_bus_info_get(dev_addr, &bus_info); + tuh_bus_info_get(dev_addr, &bus_info); p_ed->dev_addr = dev_addr; p_ed->ep_number = ep_addr & 0x0F; diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 0e3d0d31a..d59a2b4ee 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -115,7 +115,7 @@ void hcd_int_disable(uint8_t rhport) { bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const *desc_ep) { tuh_bus_info_t bus_info; - hcd_bus_info_get(dev_addr, &bus_info); + tuh_bus_info_get(dev_addr, &bus_info); bool const need_pre = (bus_info.hub_addr && bus_info.speed == TUSB_SPEED_LOW); uint8_t const pio_rhport = RHPORT_PIO(rhport); diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index e6975287d..6f6d27d0e 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -30,6 +30,7 @@ #if CFG_TUH_ENABLED && defined(TUP_USBIP_RUSB2) #include "host/hcd.h" +#include "host/usbh.h" #include "rusb2_type.h" #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) @@ -663,7 +664,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const if (0 == epn) { rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; tuh_bus_info_t bus_info; - hcd_bus_info_get(dev_addr, &bus_info); + tuh_bus_info_get(dev_addr, &bus_info); uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t) &rusb->DEVADD[0]; devadd += dev_addr; while (rusb->DCPCTR_b.PBUSY) {} diff --git a/src/portable/synopsys/dwc2/dwc2_common.c b/src/portable/synopsys/dwc2/dwc2_common.c index f6ed8fc98..e1e7d5c1a 100644 --- a/src/portable/synopsys/dwc2/dwc2_common.c +++ b/src/portable/synopsys/dwc2/dwc2_common.c @@ -36,6 +36,7 @@ #if CFG_TUH_ENABLED #include "host/hcd.h" +#include "host/usbh.h" #endif #include "dwc2_common.h" diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 6fd343686..7c29a03cf 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -36,6 +36,7 @@ #define DWC2_DEBUG 2 #include "host/hcd.h" +#include "host/usbh.h" #include "dwc2_common.h" // Max number of endpoints application can open, can be larger than DWC2_CHANNEL_COUNT_MAX @@ -476,7 +477,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, const tusb_desc_endpoint_t* const tusb_speed_t rh_speed = hprt_speed_get(dwc2); tuh_bus_info_t bus_info; - hcd_bus_info_get(dev_addr, &bus_info); + tuh_bus_info_get(dev_addr, &bus_info); // find a free endpoint const uint8_t ep_id = edpt_alloc(); diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c index 22ea22e63..d2f304407 100644 --- a/src/portable/template/hcd_template.c +++ b/src/portable/template/hcd_template.c @@ -29,6 +29,7 @@ #if CFG_TUH_ENABLED && CFG_TUSB_MCU == OPT_MCU_NONE #include "host/hcd.h" +#include "host/usbh.h" //--------------------------------------------------------------------+ // Controller API -- cgit v1.3.1 From 2c1414b4c18518a179560a097aada40609303693 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 28 Apr 2025 12:59:59 +0700 Subject: usbh: add roothub debounncing flag to ignore attach/remove event on the roothub that is currently doing debouncing delay --- src/host/usbh.c | 22 ++++++++++++++++++---- src/portable/synopsys/dwc2/hcd_dwc2.c | 19 +++---------------- 2 files changed, 21 insertions(+), 20 deletions(-) (limited to 'src/portable') diff --git a/src/host/usbh.c b/src/host/usbh.c index 8469aee83..8852bdda4 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -275,6 +275,7 @@ typedef struct { typedef struct { uint8_t controller_id; // controller ID uint8_t enumerating_daddr; // device address of the device being enumerated + uint8_t attach_debouncing_bm; // bitmask for roothub port attach debouncing tuh_bus_info_t dev0_bus; // bus info for dev0 in enumeration usbh_ctrl_xfer_info_t ctrl_xfer_info; // control transfer } usbh_data_t; @@ -349,7 +350,7 @@ bool tuh_rhport_is_active(uint8_t rhport) { bool tuh_rhport_reset_bus(uint8_t rhport, bool active) { TU_VERIFY(tuh_rhport_is_active(rhport)); - if ( active ) { + if (active) { hcd_port_reset(rhport); } else { hcd_port_reset_end(rhport); @@ -1021,10 +1022,18 @@ bool tuh_bus_info_get(uint8_t daddr, tuh_bus_info_t* bus_info) { TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) { switch (event->event_id) { case HCD_EVENT_DEVICE_ATTACH: - - break; - case HCD_EVENT_DEVICE_REMOVE: + // Attach debouncing on roothub: skip attach/remove while debouncing delay + if (event->connection.hub_addr == 0) { + if (tu_bit_test(_usbh_data.attach_debouncing_bm, event->rhport)) { + return; + } + + if (event->event_id == HCD_EVENT_DEVICE_ATTACH) { + // No debouncing, set flag if attach event + _usbh_data.attach_debouncing_bm |= TU_BIT(event->rhport); + } + } break; default: break; @@ -1406,6 +1415,11 @@ static bool enum_new_device(hcd_event_t* event) { // wait until device connection is stable TODO non blocking tusb_time_delay_ms_api(ENUM_DEBOUNCING_DELAY_MS); + // clear roothub debouncing delay + if (dev0_bus->hub_addr == 0) { + _usbh_data.attach_debouncing_bm &= (uint8_t) ~TU_BIT(dev0_bus->rhport); + } + if (dev0_bus->hub_addr == 0) { // connected directly to roothub // USB bus not active and frame number is not available yet. diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 7c29a03cf..2de15068a 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -107,7 +107,6 @@ typedef struct { typedef struct { hcd_xfer_t xfer[DWC2_CHANNEL_COUNT_MAX]; hcd_endpoint_t edpt[CFG_TUH_DWC2_ENDPOINT_MAX]; - bool attach_debounce; // if true: wait for the debounce delay before issuing new attach events } hcd_data_t; hcd_data_t _hcd_data; @@ -423,11 +422,6 @@ uint32_t hcd_frame_number(uint8_t rhport) { // Get the current connect status of roothub port bool hcd_port_connect_status(uint8_t rhport) { - // this is called from enum_new_device() - after the debouncing delays - if (_hcd_data.attach_debounce) { - _hcd_data.attach_debounce = false; // allow new attach events again - } - dwc2_regs_t* dwc2 = DWC2_REG(rhport); return dwc2->hprt & HPRT_CONN_STATUS; } @@ -1328,10 +1322,7 @@ static void handle_hprt_irq(uint8_t rhport, bool in_isr) { hprt |= HPRT_CONN_DETECT; if (hprt_bm.conn_status) { - if (!_hcd_data.attach_debounce) { - _hcd_data.attach_debounce = true; // block new attach events until the debounce delay is over - hcd_event_device_attach(rhport, in_isr); - } + hcd_event_device_attach(rhport, in_isr); } } @@ -1398,12 +1389,8 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { // Device disconnected dwc2->gintsts = GINTSTS_DISCINT; - // ignore device removal if attach debounce is active - // it will evaluate the port status after the debounce delay - if (!_hcd_data.attach_debounce) { - if (!(dwc2->hprt & HPRT_CONN_STATUS)) { - hcd_event_device_remove(rhport, in_isr); - } + if (!(dwc2->hprt & HPRT_CONN_STATUS)) { + hcd_event_device_remove(rhport, in_isr); } } -- cgit v1.3.1 From fc43eeddf2b3d045431d56cc50bb0e2d6fdf5b98 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 29 Apr 2025 10:11:20 +0700 Subject: attach debouncing fixed issue with port1 highspeed on imxrt --- .idea/debugServers/rt1060.xml | 2 +- .idea/debugServers/rt1064.xml | 2 +- .idea/debugServers/sam21.xml | 2 +- .idea/debugServers/sam51.xml | 2 +- .idea/debugServers/stm32f769.xml | 4 ++-- .idea/debugServers/stm32h563.xml | 2 +- .idea/debugServers/stm32h743.xml | 2 +- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 6 ------ 8 files changed, 8 insertions(+), 14 deletions(-) (limited to 'src/portable') diff --git a/.idea/debugServers/rt1060.xml b/.idea/debugServers/rt1060.xml index 3325cc81f..cbd295b4e 100644 --- a/.idea/debugServers/rt1060.xml +++ b/.idea/debugServers/rt1060.xml @@ -5,7 +5,7 @@ - + diff --git a/.idea/debugServers/rt1064.xml b/.idea/debugServers/rt1064.xml index 4dc38ef63..691066f9d 100644 --- a/.idea/debugServers/rt1064.xml +++ b/.idea/debugServers/rt1064.xml @@ -5,7 +5,7 @@ - + diff --git a/.idea/debugServers/sam21.xml b/.idea/debugServers/sam21.xml index d8763b33b..3f6735bd1 100644 --- a/.idea/debugServers/sam21.xml +++ b/.idea/debugServers/sam21.xml @@ -5,7 +5,7 @@ - + diff --git a/.idea/debugServers/sam51.xml b/.idea/debugServers/sam51.xml index 0d15ff856..99a92c174 100644 --- a/.idea/debugServers/sam51.xml +++ b/.idea/debugServers/sam51.xml @@ -5,7 +5,7 @@ - + diff --git a/.idea/debugServers/stm32f769.xml b/.idea/debugServers/stm32f769.xml index 2fb322a0f..22a452218 100644 --- a/.idea/debugServers/stm32f769.xml +++ b/.idea/debugServers/stm32f769.xml @@ -1,11 +1,11 @@ - + - + diff --git a/.idea/debugServers/stm32h563.xml b/.idea/debugServers/stm32h563.xml index 9bf6db6e9..637839314 100644 --- a/.idea/debugServers/stm32h563.xml +++ b/.idea/debugServers/stm32h563.xml @@ -5,7 +5,7 @@ - + diff --git a/.idea/debugServers/stm32h743.xml b/.idea/debugServers/stm32h743.xml index 63680b78c..b04e4a708 100644 --- a/.idea/debugServers/stm32h743.xml +++ b/.idea/debugServers/stm32h743.xml @@ -5,7 +5,7 @@ - + diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 22eb22690..b5324a754 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -93,12 +93,6 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { hcd_reg->USBMODE = USBMODE_CM_HOST; #endif - // FIXME force full speed, still have issue with Highspeed enumeration - // probably due to physical connection bouncing when plug/unplug - // 1. Have issue when plug/unplug devices, maybe the port is not reset properly - // 2. Also does not seems to detect disconnection - hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; - return ehci_init(rhport, (uint32_t) &hcd_reg->CAPLENGTH, (uint32_t) &hcd_reg->USBCMD); } -- cgit v1.3.1 From 6a92b8efa442d0bfffa5bb43419d35d12c753910 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Sun, 4 May 2025 15:10:17 +0200 Subject: dcd/ci_hs: add vbus charge option. Signed-off-by: HiFiPhile --- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 4 ++++ src/tusb_option.h | 9 +++++++++ 2 files changed, 13 insertions(+) (limited to 'src/portable') diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index a716dc24c..244f5a2d4 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -239,7 +239,11 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { usbmode |= USBMODE_CM_DEVICE; dcd_reg->USBMODE = usbmode; +#ifdef CFG_TUD_CI_HS_VBUS_CHARGE + dcd_reg->OTGSC = OTGSC_VBUS_CHARGE | OTGSC_OTG_TERMINATION; +#else dcd_reg->OTGSC = OTGSC_VBUS_DISCHARGE | OTGSC_OTG_TERMINATION; +#endif #if !TUD_OPT_HIGH_SPEED dcd_reg->PORTSC1 = PORTSC1_FORCE_FULL_SPEED; diff --git a/src/tusb_option.h b/src/tusb_option.h index 98f1a91b5..679b80420 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -267,6 +267,15 @@ #define CFG_TUD_DWC2_DMA_ENABLE CFG_TUD_DWC2_DMA_ENABLE_DEFAULT #endif +// Enable CI_HS VBUS Charge +#ifndef CFG_TUD_CI_HS_VBUS_CHARGE + #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT + #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0 + #endif + + #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT +#endif + // Enable DWC2 Slave mode for host #ifndef CFG_TUH_DWC2_SLAVE_ENABLE #ifndef CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT -- cgit v1.3.1 From c8baba10f9a7a6150348618aec74719522887c93 Mon Sep 17 00:00:00 2001 From: Tomas Rezucha Date: Wed, 9 Apr 2025 10:52:44 +0200 Subject: fix(dcd): Fixed race condition on device disconnect TinyUSB does not provide any locking means to protect the DCD variables. This can lead to race conditions when the user is trying to submit a transfer while the device is being disconnected. This can cause the device to be in an inconsistent state, leading to a crash or undefined behavior. This commit adds a spin-lock to protect the DCD variables during device disconnect. Closes https://github.com/espressif/esp-idf/issues/9691 Also reported in https://github.com/espressif/esp-usb/pull/131 --- src/portable/synopsys/dwc2/dcd_dwc2.c | 24 ++++++++++++++++++++++++ src/portable/synopsys/dwc2/dwc2_critical.h | 25 +++++++++++++++++++++++++ 2 files changed, 49 insertions(+) create mode 100644 src/portable/synopsys/dwc2/dwc2_critical.h (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 52d675611..23273cb78 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -40,6 +40,7 @@ #include "device/dcd.h" #include "dwc2_common.h" +#include "dwc2_critical.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM @@ -52,6 +53,9 @@ typedef struct { uint8_t interval; } xfer_ctl_t; +/* +This variable is modified from ISR context, so it must be protected by critical section +*/ static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) @@ -321,6 +325,9 @@ static void edpt_disable(uint8_t rhport, uint8_t ep_addr, bool stall) { } } +// Since this function returns void, it is not possible to return a boolean success message +// We must make sure that this function is not called when the EP is disabled +// Must be called from critical section static void edpt_schedule_packets(uint8_t rhport, const uint8_t epnum, const uint8_t dir) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); xfer_ctl_t* const xfer = XFER_CTL_BASE(epnum, dir); @@ -531,6 +538,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; + DCD_ENTER_CRITICAL(); _dcd_data.allocated_epin_count = 0; // Disable non-control interrupt @@ -550,6 +558,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dfifo_flush_rx(dwc2); dfifo_device_init(rhport); // re-init dfifo + DCD_EXIT_CRITICAL(); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { @@ -568,7 +577,12 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); + DCD_ENTER_CRITICAL(); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); + if (xfer->max_size == 0) { + DCD_EXIT_CRITICAL(); + return false; // Endpoint is closed + } xfer->buffer = buffer; xfer->ff = NULL; xfer->total_len = total_bytes; @@ -580,6 +594,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to // Schedule packets to be sent within interrupt edpt_schedule_packets(rhport, epnum, dir); + DCD_EXIT_CRITICAL(); return true; } @@ -595,7 +610,12 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); + DCD_ENTER_CRITICAL(); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); + if (xfer->max_size == 0) { + DCD_EXIT_CRITICAL(); + return false; // Endpoint is closed + } xfer->buffer = NULL; xfer->ff = ff; xfer->total_len = total_bytes; @@ -603,6 +623,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t // Schedule packets to be sent within interrupt // TODO xfer fifo may only available for slave mode edpt_schedule_packets(rhport, epnum, dir); + DCD_EXIT_CRITICAL(); return true; } @@ -631,6 +652,7 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { //-------------------------------------------------------------------- // 7.4.1 Initialization on USB Reset +// Must be called from critical section static void handle_bus_reset(uint8_t rhport) { dwc2_regs_t *dwc2 = DWC2_REG(rhport); const uint8_t ep_count = dwc2_ep_count(dwc2); @@ -989,8 +1011,10 @@ void dcd_int_handler(uint8_t rhport) { if (gintsts & GINTSTS_USBRST) { // USBRST is start of reset. + DCD_ENTER_CRITICAL(); dwc2->gintsts = GINTSTS_USBRST; handle_bus_reset(rhport); + DCD_EXIT_CRITICAL(); } if (gintsts & GINTSTS_ENUMDNE) { diff --git a/src/portable/synopsys/dwc2/dwc2_critical.h b/src/portable/synopsys/dwc2/dwc2_critical.h new file mode 100644 index 000000000..e2508c8fd --- /dev/null +++ b/src/portable/synopsys/dwc2/dwc2_critical.h @@ -0,0 +1,25 @@ +/* + * SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef TUSB_DWC2_CRITICAL_H_ +#define TUSB_DWC2_CRITICAL_H_ + +#include "common/tusb_mcu.h" + +#if defined(TUP_USBIP_DWC2_ESP32) + #include "freertos/FreeRTOS.h" + static portMUX_TYPE dcd_lock = portMUX_INITIALIZER_UNLOCKED; + #define DCD_ENTER_CRITICAL() portENTER_CRITICAL(&dcd_lock) + #define DCD_EXIT_CRITICAL() portEXIT_CRITICAL(&dcd_lock) + +#else + // Define critical section macros for DWC2 as no-op if not defined + // This is to avoid breaking existing code that does not use critical section + #define DCD_ENTER_CRITICAL() // no-op + #define DCD_EXIT_CRITICAL() // no-op +#endif + +#endif // TUSB_DWC2_CRITICAL_H_ -- cgit v1.3.1 From 72ee742761e5ed9cad29911ff19b8808972854ee Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 16 May 2025 20:09:02 +0700 Subject: add osal_critical API() for use with dwc2 --- src/osal/osal_freertos.h | 84 ++++++++++++++++++++++------------- src/osal/osal_none.h | 17 +++++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 82 +++++++++++++++++++--------------- 3 files changed, 116 insertions(+), 67 deletions(-) (limited to 'src/portable') diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index a3a0f3a3f..ba998bfa1 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -42,20 +42,20 @@ extern "C" { //--------------------------------------------------------------------+ #if configSUPPORT_STATIC_ALLOCATION - typedef StaticSemaphore_t osal_semaphore_def_t; - typedef StaticSemaphore_t osal_mutex_def_t; +typedef StaticSemaphore_t osal_semaphore_def_t; +typedef StaticSemaphore_t osal_mutex_def_t; #else - // not used therefore defined to smallest possible type to save space - typedef uint8_t osal_semaphore_def_t; - typedef uint8_t osal_mutex_def_t; + +// not used therefore defined to the smallest possible type to save space +typedef uint8_t osal_semaphore_def_t; +typedef uint8_t osal_mutex_def_t; #endif typedef SemaphoreHandle_t osal_semaphore_t; typedef SemaphoreHandle_t osal_mutex_t; typedef QueueHandle_t osal_queue_t; -typedef struct -{ +typedef struct { uint16_t depth; uint16_t item_sz; void* buf; @@ -83,16 +83,14 @@ typedef struct //--------------------------------------------------------------------+ // TASK API //--------------------------------------------------------------------+ - TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) { - if ( msec == OSAL_TIMEOUT_WAIT_FOREVER ) return portMAX_DELAY; - if ( msec == 0 ) return 0; + if (msec == OSAL_TIMEOUT_WAIT_FOREVER) { return portMAX_DELAY; } + if (msec == 0) { return 0; } uint32_t ticks = pdMS_TO_TICKS(msec); - // configTICK_RATE_HZ is less than 1000 and 1 tick > 1 ms - // we still need to delay at least 1 tick - if ( ticks == 0 ) ticks = 1; + // If configTICK_RATE_HZ is less than 1000 and 1 tick > 1 ms, we still need to delay at least 1 tick + if (ticks == 0) { ticks = 1; } return ticks; } @@ -102,9 +100,47 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { } //--------------------------------------------------------------------+ -// Semaphore API +// Critical API //--------------------------------------------------------------------+ +#if TUSB_MCU_VENDOR_ESPRESSIF +// Espressif critical take spinlock as argument +typedef portMUX_TYPE osal_critical_t; + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { + spinlock_initialize(ctx); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx) { + portENTER_CRITICAL(ctx); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx) { + portEXIT_CRITICAL(ctx); +} +#else + +typedef uint8_t osal_critical_t; // not used + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { + (void) ctx; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx) { + (void) ctx; + portENTER_CRITICAL(); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx) { + (void) ctx; + portEXIT_CRITICAL(); +} + +#endif + +//--------------------------------------------------------------------+ +// Semaphore API +//--------------------------------------------------------------------+ TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { #if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateBinaryStatic(semdef); @@ -120,19 +156,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_delete(osal_semaphore_t } TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { - if ( !in_isr ) { + if (!in_isr) { return xSemaphoreGive(sem_hdl) != 0; } else { BaseType_t xHigherPriorityTaskWoken = pdFALSE; BaseType_t res = xSemaphoreGiveFromISR(sem_hdl, &xHigherPriorityTaskWoken); - -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - // not needed after https://github.com/espressif/esp-idf/commit/c5fd79547ac9b7bae06fa660e9f814d18d3390b7 - if ( xHigherPriorityTaskWoken ) portYIELD_FROM_ISR(); -#else portYIELD_FROM_ISR(xHigherPriorityTaskWoken); -#endif - return res != 0; } } @@ -148,7 +177,6 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t c //--------------------------------------------------------------------+ // MUTEX API (priority inheritance) //--------------------------------------------------------------------+ - TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t *mdef) { #if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateMutexStatic(mdef); @@ -174,7 +202,6 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd //--------------------------------------------------------------------+ // QUEUE API //--------------------------------------------------------------------+ - TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { osal_queue_t q; @@ -201,19 +228,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, v } TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const *data, bool in_isr) { - if ( !in_isr ) { + if (!in_isr) { return xQueueSendToBack(qhdl, data, OSAL_TIMEOUT_WAIT_FOREVER) != 0; } else { BaseType_t xHigherPriorityTaskWoken = pdFALSE; BaseType_t res = xQueueSendToBackFromISR(qhdl, data, &xHigherPriorityTaskWoken); - -#if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - // not needed after https://github.com/espressif/esp-idf/commit/c5fd79547ac9b7bae06fa660e9f814d18d3390b7 (IDF v5) - if ( xHigherPriorityTaskWoken ) portYIELD_FROM_ISR(); -#else portYIELD_FROM_ISR(xHigherPriorityTaskWoken); -#endif - return res != 0; } } diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 40e9bb83a..d9100cfdd 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -40,6 +40,23 @@ extern "C" { TU_ATTR_WEAK void osal_task_delay(uint32_t msec); #endif +//--------------------------------------------------------------------+ +// Critical API +//--------------------------------------------------------------------+ +typedef uint8_t osal_critical_t; // not used + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { + (void) ctx; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx) { + (void) ctx; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx) { + (void) ctx; +} + //--------------------------------------------------------------------+ // Binary Semaphore API //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 23273cb78..5dd392409 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -40,7 +40,6 @@ #include "device/dcd.h" #include "dwc2_common.h" -#include "dwc2_critical.h" //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM @@ -53,12 +52,12 @@ typedef struct { uint8_t interval; } xfer_ctl_t; -/* -This variable is modified from ISR context, so it must be protected by critical section -*/ +// This variable is modified from ISR context, so it must be protected by critical section static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) +static osal_critical_t _dcd_critical; + typedef struct { // EP0 transfers are limited to 1 packet - larger sizes has to be split uint16_t ep0_pending[2]; // Index determines direction as tusb_dir_t type @@ -394,6 +393,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); tu_memclr(&_dcd_data, sizeof(_dcd_data)); + osal_critical_init(&_dcd_critical); // Core Initialization const bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_DEVICE); @@ -538,7 +538,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; - DCD_ENTER_CRITICAL(); + osal_critical_enter(&_dcd_critical); _dcd_data.allocated_epin_count = 0; // Disable non-control interrupt @@ -558,7 +558,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dfifo_flush_rx(dwc2); dfifo_device_init(rhport); // re-init dfifo - DCD_EXIT_CRITICAL(); + osal_critical_exit(&_dcd_critical); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { @@ -576,27 +576,33 @@ bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpo bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - - DCD_ENTER_CRITICAL(); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); + + bool ret; + + osal_critical_enter(&_dcd_critical); + if (xfer->max_size == 0) { - DCD_EXIT_CRITICAL(); - return false; // Endpoint is closed - } - xfer->buffer = buffer; - xfer->ff = NULL; - xfer->total_len = total_bytes; + ret = false; // Endpoint is closed + } else { + xfer->buffer = buffer; + xfer->ff = NULL; + xfer->total_len = total_bytes; - // EP0 can only handle one packet - if (epnum == 0) { - _dcd_data.ep0_pending[dir] = total_bytes; + // EP0 can only handle one packet + if (epnum == 0) { + _dcd_data.ep0_pending[dir] = total_bytes; + } + + // Schedule packets to be sent within interrupt + edpt_schedule_packets(rhport, epnum, dir); + + ret = true; } - // Schedule packets to be sent within interrupt - edpt_schedule_packets(rhport, epnum, dir); - DCD_EXIT_CRITICAL(); + osal_critical_exit(&_dcd_critical); - return true; + return ret; } // The number of bytes has to be given explicitly to allow more flexible control of how many @@ -609,23 +615,29 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - - DCD_ENTER_CRITICAL(); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); + + bool ret; + + osal_critical_enter(&_dcd_critical); + if (xfer->max_size == 0) { - DCD_EXIT_CRITICAL(); - return false; // Endpoint is closed + ret = false; // Endpoint is closed + } else { + xfer->buffer = NULL; + xfer->ff = ff; + xfer->total_len = total_bytes; + + // Schedule packets to be sent within interrupt + // TODO xfer fifo may only available for slave mode + edpt_schedule_packets(rhport, epnum, dir); + + ret = true; } - xfer->buffer = NULL; - xfer->ff = ff; - xfer->total_len = total_bytes; - // Schedule packets to be sent within interrupt - // TODO xfer fifo may only available for slave mode - edpt_schedule_packets(rhport, epnum, dir); - DCD_EXIT_CRITICAL(); + osal_critical_exit(&_dcd_critical); - return true; + return ret; } void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { @@ -1011,10 +1023,10 @@ void dcd_int_handler(uint8_t rhport) { if (gintsts & GINTSTS_USBRST) { // USBRST is start of reset. - DCD_ENTER_CRITICAL(); + osal_critical_enter(&_dcd_critical); dwc2->gintsts = GINTSTS_USBRST; handle_bus_reset(rhport); - DCD_EXIT_CRITICAL(); + osal_critical_exit(&_dcd_critical); } if (gintsts & GINTSTS_ENUMDNE) { -- cgit v1.3.1 From 9aea7751f292f40684d4533196037c26e2239934 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 19 May 2025 18:57:39 +0700 Subject: dwc2 only enter critical in isr with multiple core CPUs --- src/common/tusb_mcu.h | 7 +++++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 14 ++++++++------ 2 files changed, 15 insertions(+), 6 deletions(-) (limited to 'src/portable') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index a0175d664..6678265b5 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -369,6 +369,10 @@ #define TUP_DCD_ENDPOINT_MAX 7 // only 5 TX FIFO for endpoint IN #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + #if CFG_TUSB_MCU == OPT_MCU_ESP32S3 + #define TUP_MCU_MULTIPLE_CORE 1 + #endif + // Disable slave if DMA is enabled #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE @@ -381,6 +385,8 @@ #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + #define TUP_MCU_MULTIPLE_CORE 1 + // Disable slave if DMA is enabled #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE @@ -410,6 +416,7 @@ #elif TU_CHECK_MCU(OPT_MCU_RP2040) #define TUP_DCD_EDPT_ISO_ALLOC #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_MCU_MULTIPLE_CORE 1 #define TU_ATTR_FAST_FUNC __attribute__((section(".time_critical.tinyusb"))) diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 5dd392409..dc00ba82b 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -539,6 +539,7 @@ void dcd_edpt_close_all(uint8_t rhport) { uint8_t const ep_count = _dwc2_controller[rhport].ep_count; osal_critical_enter(&_dcd_critical); + _dcd_data.allocated_epin_count = 0; // Disable non-control interrupt @@ -556,8 +557,8 @@ void dcd_edpt_close_all(uint8_t rhport) { dfifo_flush_tx(dwc2, 0x10); // all tx fifo dfifo_flush_rx(dwc2); - dfifo_device_init(rhport); // re-init dfifo + osal_critical_exit(&_dcd_critical); } @@ -577,7 +578,6 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); - bool ret; osal_critical_enter(&_dcd_critical); @@ -596,7 +596,6 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to // Schedule packets to be sent within interrupt edpt_schedule_packets(rhport, epnum, dir); - ret = true; } @@ -616,7 +615,6 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); - bool ret; osal_critical_enter(&_dcd_critical); @@ -631,7 +629,6 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t // Schedule packets to be sent within interrupt // TODO xfer fifo may only available for slave mode edpt_schedule_packets(rhport, epnum, dir); - ret = true; } @@ -1017,16 +1014,21 @@ static void handle_ep_irq(uint8_t rhport, uint8_t dir) { */ void dcd_int_handler(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); - const uint32_t gintmask = dwc2->gintmsk; const uint32_t gintsts = dwc2->gintsts & gintmask; if (gintsts & GINTSTS_USBRST) { // USBRST is start of reset. + #if TUP_MCU_MULTIPLE_CORE osal_critical_enter(&_dcd_critical); + #endif + dwc2->gintsts = GINTSTS_USBRST; handle_bus_reset(rhport); + + #if TUP_MCU_MULTIPLE_CORE osal_critical_exit(&_dcd_critical); + #endif } if (gintsts & GINTSTS_ENUMDNE) { -- cgit v1.3.1 From bb1d348eb3908543f7bc80fc462d91bba62edace Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 19 May 2025 22:51:40 +0700 Subject: implement osal critical for none/freertos/pico-sdk --- src/device/usbd.c | 9 +++------ src/osal/osal_freertos.h | 30 +++++++++++++++++++++--------- src/osal/osal_none.h | 19 ++++++++++++++----- src/osal/osal_pico.h | 21 +++++++++++++++++++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 19 ++++++++++--------- 5 files changed, 69 insertions(+), 29 deletions(-) (limited to 'src/portable') diff --git a/src/device/usbd.c b/src/device/usbd.c index 9c381d5e0..32de8740b 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -1242,13 +1242,10 @@ TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const* event, bool in_isr) // USBD API For Class Driver //--------------------------------------------------------------------+ -void usbd_int_set(bool enabled) -{ - if (enabled) - { +void usbd_int_set(bool enabled) { + if (enabled) { dcd_int_enable(_usbd_rhport); - }else - { + } else { dcd_int_disable(_usbd_rhport); } } diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index ba998bfa1..5d6534709 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -102,38 +102,50 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { //--------------------------------------------------------------------+ // Critical API //--------------------------------------------------------------------+ +#define OSAL_CRITIAL_DEF(_name, _int_set) \ + osal_critical_t _name + #if TUSB_MCU_VENDOR_ESPRESSIF -// Espressif critical take spinlock as argument +// Espressif critical take spinlock as argument and does not use in_isr typedef portMUX_TYPE osal_critical_t; TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { spinlock_initialize(ctx); } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx) { +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { + (void) in_isr; portENTER_CRITICAL(ctx); } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx) { +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { + (void) in_isr; portEXIT_CRITICAL(ctx); } #else -typedef uint8_t osal_critical_t; // not used +typedef UBaseType_t osal_critical_t; TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { (void) ctx; } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx) { - (void) ctx; - portENTER_CRITICAL(); +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { + if (in_isr) { + *ctx = taskENTER_CRITICAL_FROM_ISR(); + } else { + taskENTER_CRITICAL(); + } } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx) { +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { (void) ctx; - portEXIT_CRITICAL(); + if (in_isr) { + taskEXIT_CRITICAL_FROM_ISR(*ctx); + } else { + taskEXIT_CRITICAL(); + } } #endif diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index d9100cfdd..05a121ae6 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -43,18 +43,27 @@ TU_ATTR_WEAK void osal_task_delay(uint32_t msec); //--------------------------------------------------------------------+ // Critical API //--------------------------------------------------------------------+ -typedef uint8_t osal_critical_t; // not used +typedef struct { + void (* interrupt_set)(bool); +} osal_critical_t; + +#define OSAL_CRITIAL_DEF(_name, _int_set) \ + osal_critical_t _name = { .interrupt_set = _int_set } TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { (void) ctx; } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx) { - (void) ctx; +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { + if (!in_isr) { + ctx->interrupt_set(false); + } } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx) { - (void) ctx; +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { + if (!in_isr) { + ctx->interrupt_set(true); + } } //--------------------------------------------------------------------+ diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index 315de0950..be631ed18 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -43,6 +43,27 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { sleep_ms(msec); } +//--------------------------------------------------------------------+ +// Critical API +//--------------------------------------------------------------------+ +typedef critical_section_t osal_critical_t; +#define OSAL_CRITIAL_DEF(_name, _int_set) \ + osal_critical_t _name + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { + critical_section_init(ctx); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { + (void) in_isr; + critical_section_enter_blocking(ctx); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { + (void) in_isr; + critical_section_exit(ctx); +} + //--------------------------------------------------------------------+ // Binary Semaphore API //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index dc00ba82b..4a2dad69e 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -39,6 +39,7 @@ #define DWC2_DEBUG 2 #include "device/dcd.h" +#include "device/usbd_pvt.h" #include "dwc2_common.h" //--------------------------------------------------------------------+ @@ -56,7 +57,7 @@ typedef struct { static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) -static osal_critical_t _dcd_critical; +static OSAL_CRITIAL_DEF(_dcd_critical, usbd_int_set); typedef struct { // EP0 transfers are limited to 1 packet - larger sizes has to be split @@ -538,7 +539,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; - osal_critical_enter(&_dcd_critical); + osal_critical_enter(&_dcd_critical, false); _dcd_data.allocated_epin_count = 0; @@ -559,7 +560,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dfifo_flush_rx(dwc2); dfifo_device_init(rhport); // re-init dfifo - osal_critical_exit(&_dcd_critical); + osal_critical_exit(&_dcd_critical, false); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { @@ -580,7 +581,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - osal_critical_enter(&_dcd_critical); + osal_critical_enter(&_dcd_critical, false); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -599,7 +600,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to ret = true; } - osal_critical_exit(&_dcd_critical); + osal_critical_exit(&_dcd_critical, false); return ret; } @@ -617,7 +618,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - osal_critical_enter(&_dcd_critical); + osal_critical_enter(&_dcd_critical, false); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -632,7 +633,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t ret = true; } - osal_critical_exit(&_dcd_critical); + osal_critical_exit(&_dcd_critical, false); return ret; } @@ -1020,14 +1021,14 @@ void dcd_int_handler(uint8_t rhport) { if (gintsts & GINTSTS_USBRST) { // USBRST is start of reset. #if TUP_MCU_MULTIPLE_CORE - osal_critical_enter(&_dcd_critical); + osal_critical_enter(&_dcd_critical, true); #endif dwc2->gintsts = GINTSTS_USBRST; handle_bus_reset(rhport); #if TUP_MCU_MULTIPLE_CORE - osal_critical_exit(&_dcd_critical); + osal_critical_exit(&_dcd_critical, true); #endif } -- cgit v1.3.1 From a4875fefead1a2b27f13a588dea44eaca737f553 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 20 May 2025 16:18:00 +0700 Subject: rename osal_critcal to osal_spinlock add spinlock implementation for most rtos --- src/osal/osal.h | 4 ++++ src/osal/osal_freertos.h | 22 +++++++++++----------- src/osal/osal_mynewt.h | 22 ++++++++++++++++++++++ src/osal/osal_none.h | 15 ++++++++------- src/osal/osal_pico.h | 14 +++++++------- src/osal/osal_rtthread.h | 22 ++++++++++++++++++++++ src/osal/osal_rtx4.h | 19 +++++++++++++++++++ src/osal/osal_zephyr.h | 25 +++++++++++++++++++++++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 20 ++++++++++---------- 9 files changed, 128 insertions(+), 35 deletions(-) (limited to 'src/portable') diff --git a/src/osal/osal.h b/src/osal/osal.h index 38d45da44..a33280425 100644 --- a/src/osal/osal.h +++ b/src/osal/osal.h @@ -75,6 +75,10 @@ typedef void (*osal_task_func_t)( void * ); // OSAL Porting API // Should be implemented as static inline function in osal_port.h header /* + void osal_spin_init(osal_spinlock_t *ctx); + void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) + void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr); + osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef); bool osal_semaphore_delete(osal_semaphore_t semd_hdl); bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr); diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 5d6534709..09b6cb338 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -100,38 +100,38 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { } //--------------------------------------------------------------------+ -// Critical API +// Spinlock API //--------------------------------------------------------------------+ -#define OSAL_CRITIAL_DEF(_name, _int_set) \ - osal_critical_t _name +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name #if TUSB_MCU_VENDOR_ESPRESSIF // Espressif critical take spinlock as argument and does not use in_isr -typedef portMUX_TYPE osal_critical_t; +typedef portMUX_TYPE osal_spinlock_t; -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { spinlock_initialize(ctx); } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { (void) in_isr; portENTER_CRITICAL(ctx); } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { (void) in_isr; portEXIT_CRITICAL(ctx); } #else -typedef UBaseType_t osal_critical_t; +typedef UBaseType_t osal_spinlock_t; -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { (void) ctx; } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { *ctx = taskENTER_CRITICAL_FROM_ISR(); } else { @@ -139,7 +139,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ct } } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { (void) ctx; if (in_isr) { taskEXIT_CRITICAL_FROM_ISR(*ctx); diff --git a/src/osal/osal_mynewt.h b/src/osal/osal_mynewt.h index 16def0d2a..58d226b10 100644 --- a/src/osal/osal_mynewt.h +++ b/src/osal/osal_mynewt.h @@ -40,6 +40,28 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { os_time_delay( os_time_ms_to_ticks32(msec) ); } +//--------------------------------------------------------------------+ +// Spinlock API +//--------------------------------------------------------------------+ +typedef os_sr_t osal_spinlock_t; + +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { + (void) ctx; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { + (void) in_isr; + OS_ENTER_CRITICAL(*ctx); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { + (void) in_isr; + OS_ENTER_CRITICAL(*ctx); +} + //--------------------------------------------------------------------+ // Semaphore API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 05a121ae6..2a0170ba4 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -41,26 +41,27 @@ TU_ATTR_WEAK void osal_task_delay(uint32_t msec); #endif //--------------------------------------------------------------------+ -// Critical API +// Spinlock API //--------------------------------------------------------------------+ typedef struct { void (* interrupt_set)(bool); -} osal_critical_t; +} osal_spinlock_t; -#define OSAL_CRITIAL_DEF(_name, _int_set) \ - osal_critical_t _name = { .interrupt_set = _int_set } +// For SMP, spinlock must be locked by hardware, not use interrupt +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name = { .interrupt_set = _int_set } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { (void) ctx; } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { if (!in_isr) { ctx->interrupt_set(false); } } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { if (!in_isr) { ctx->interrupt_set(true); } diff --git a/src/osal/osal_pico.h b/src/osal/osal_pico.h index be631ed18..ace5907d7 100644 --- a/src/osal/osal_pico.h +++ b/src/osal/osal_pico.h @@ -44,22 +44,22 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { } //--------------------------------------------------------------------+ -// Critical API +// Spinlock API //--------------------------------------------------------------------+ -typedef critical_section_t osal_critical_t; -#define OSAL_CRITIAL_DEF(_name, _int_set) \ - osal_critical_t _name +typedef critical_section_t osal_spinlock_t; // pico implement critical section with spinlock +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_init(osal_critical_t *ctx) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { critical_section_init(ctx); } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_enter(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { (void) in_isr; critical_section_enter_blocking(ctx); } -TU_ATTR_ALWAYS_INLINE static inline void osal_critical_exit(osal_critical_t *ctx, bool in_isr) { +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { (void) in_isr; critical_section_exit(ctx); } diff --git a/src/osal/osal_rtthread.h b/src/osal/osal_rtthread.h index c27814835..97f5dc69a 100644 --- a/src/osal/osal_rtthread.h +++ b/src/osal/osal_rtthread.h @@ -42,6 +42,28 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { rt_thread_mdelay(msec); } +//--------------------------------------------------------------------+ +// Spinlock API +//--------------------------------------------------------------------+ +typedef struct rt_spinlock osal_spinlock_t; + +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { + rt_spin_lock_init(ctx); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { + (void) in_isr; + rt_spin_lock(ctx); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { + (void) in_isr; + rt_spin_unlock(ctx); +} + //--------------------------------------------------------------------+ // Semaphore API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_rtx4.h b/src/osal/osal_rtx4.h index 35909e4d6..35860ddd5 100644 --- a/src/osal/osal_rtx4.h +++ b/src/osal/osal_rtx4.h @@ -56,6 +56,25 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t msec2wait(uint32_t msec) { } } +//--------------------------------------------------------------------+ +// Spinlock API, stub not implemented +//--------------------------------------------------------------------+ +typedef uint8_t osal_spinlock_t; +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { + (void) ctx; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { + (void) ctx; (void) in_isr; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { + (void) ctx; (void) in_isr; +} + //--------------------------------------------------------------------+ // Semaphore API //--------------------------------------------------------------------+ diff --git a/src/osal/osal_zephyr.h b/src/osal/osal_zephyr.h index 8ecb13c6d..7a43b8ec1 100644 --- a/src/osal/osal_zephyr.h +++ b/src/osal/osal_zephyr.h @@ -35,6 +35,31 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { k_msleep(msec); } +//--------------------------------------------------------------------+ +// Spinlock API +//--------------------------------------------------------------------+ +typedef struct { + struct k_spinlock lock; + k_spinlock_key_t key; +} osal_spinlock_t; + +#define OSAL_SPINLOCK_DEF(_name, _int_set) \ + osal_spinlock_t _name + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { + (void) ctx; +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { + (void) in_isr; + ctx->key = k_spin_lock(&ctx->lock); +} + +TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { + (void) in_isr; + k_spin_unlock(&ctx->lock, ctx->key); +} + //--------------------------------------------------------------------+ // Binary Semaphore API //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 4a2dad69e..67484c3df 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -57,7 +57,7 @@ typedef struct { static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) -static OSAL_CRITIAL_DEF(_dcd_critical, usbd_int_set); +static OSAL_SPINLOCK_DEF(_dcd_spinlock, usbd_int_set); typedef struct { // EP0 transfers are limited to 1 packet - larger sizes has to be split @@ -394,7 +394,7 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); tu_memclr(&_dcd_data, sizeof(_dcd_data)); - osal_critical_init(&_dcd_critical); + osal_spin_init(&_dcd_spinlock); // Core Initialization const bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_DEVICE); @@ -539,7 +539,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; - osal_critical_enter(&_dcd_critical, false); + osal_spin_lock(&_dcd_spinlock, false); _dcd_data.allocated_epin_count = 0; @@ -560,7 +560,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dfifo_flush_rx(dwc2); dfifo_device_init(rhport); // re-init dfifo - osal_critical_exit(&_dcd_critical, false); + osal_spin_unlock(&_dcd_spinlock, false); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { @@ -581,7 +581,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - osal_critical_enter(&_dcd_critical, false); + osal_spin_lock(&_dcd_spinlock, false); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -600,7 +600,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to ret = true; } - osal_critical_exit(&_dcd_critical, false); + osal_spin_unlock(&_dcd_spinlock, false); return ret; } @@ -618,7 +618,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - osal_critical_enter(&_dcd_critical, false); + osal_spin_lock(&_dcd_spinlock, false); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -633,7 +633,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t ret = true; } - osal_critical_exit(&_dcd_critical, false); + osal_spin_unlock(&_dcd_spinlock, false); return ret; } @@ -1021,14 +1021,14 @@ void dcd_int_handler(uint8_t rhport) { if (gintsts & GINTSTS_USBRST) { // USBRST is start of reset. #if TUP_MCU_MULTIPLE_CORE - osal_critical_enter(&_dcd_critical, true); + osal_spin_lock(&_dcd_spinlock, true); #endif dwc2->gintsts = GINTSTS_USBRST; handle_bus_reset(rhport); #if TUP_MCU_MULTIPLE_CORE - osal_critical_exit(&_dcd_critical, true); + osal_spin_unlock(&_dcd_spinlock, true); #endif } -- cgit v1.3.1 From c1d23a0a92bef016e22be3ed8194230cfab1c358 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 21 May 2025 11:19:07 +0700 Subject: osal_spin skipping lock/unlock when executed in isr --- src/osal/osal_freertos.h | 17 ++++++++++++++--- src/osal/osal_mynewt.h | 8 ++++++-- src/osal/osal_none.h | 2 +- src/osal/osal_rtthread.h | 8 ++++++-- src/osal/osal_zephyr.h | 8 ++++++-- src/portable/synopsys/dwc2/dcd_dwc2.c | 9 ++------- src/portable/synopsys/dwc2/dwc2_esp32.h | 4 ++-- 7 files changed, 37 insertions(+), 19 deletions(-) (limited to 'src/portable') diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 09b6cb338..bde5ec010 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -114,12 +114,16 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } portENTER_CRITICAL(ctx); } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } portEXIT_CRITICAL(ctx); } @@ -133,6 +137,10 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { if (in_isr) { + if (!TUP_MCU_MULTIPLE_CORE) { + (void) ctx; + return; // single core MCU does not need to lock in ISR + } *ctx = taskENTER_CRITICAL_FROM_ISR(); } else { taskENTER_CRITICAL(); @@ -140,8 +148,11 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bo } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { - (void) ctx; if (in_isr) { + if (!TUP_MCU_MULTIPLE_CORE) { + (void) ctx; + return; // single core MCU does not need to lock in ISR + } taskEXIT_CRITICAL_FROM_ISR(*ctx); } else { taskEXIT_CRITICAL(); diff --git a/src/osal/osal_mynewt.h b/src/osal/osal_mynewt.h index 58d226b10..ee95e684f 100644 --- a/src/osal/osal_mynewt.h +++ b/src/osal/osal_mynewt.h @@ -53,12 +53,16 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } OS_ENTER_CRITICAL(*ctx); } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } OS_ENTER_CRITICAL(*ctx); } diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 2a0170ba4..a8eb1042b 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -47,7 +47,7 @@ typedef struct { void (* interrupt_set)(bool); } osal_spinlock_t; -// For SMP, spinlock must be locked by hardware, not use interrupt +// For SMP, spinlock must be locked by hardware, cannot just use interrupt #define OSAL_SPINLOCK_DEF(_name, _int_set) \ osal_spinlock_t _name = { .interrupt_set = _int_set } diff --git a/src/osal/osal_rtthread.h b/src/osal/osal_rtthread.h index 97f5dc69a..a778f5425 100644 --- a/src/osal/osal_rtthread.h +++ b/src/osal/osal_rtthread.h @@ -55,12 +55,16 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } rt_spin_lock(ctx); } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } rt_spin_unlock(ctx); } diff --git a/src/osal/osal_zephyr.h b/src/osal/osal_zephyr.h index 7a43b8ec1..91f225f79 100644 --- a/src/osal/osal_zephyr.h +++ b/src/osal/osal_zephyr.h @@ -51,12 +51,16 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_spin_init(osal_spinlock_t *ctx) { } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_lock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } ctx->key = k_spin_lock(&ctx->lock); } TU_ATTR_ALWAYS_INLINE static inline void osal_spin_unlock(osal_spinlock_t *ctx, bool in_isr) { - (void) in_isr; + if (!TUP_MCU_MULTIPLE_CORE && in_isr) { + return; // single core MCU does not need to lock in ISR + } k_spin_unlock(&ctx->lock, ctx->key); } diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 67484c3df..19eac6e15 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -1020,16 +1020,11 @@ void dcd_int_handler(uint8_t rhport) { if (gintsts & GINTSTS_USBRST) { // USBRST is start of reset. - #if TUP_MCU_MULTIPLE_CORE - osal_spin_lock(&_dcd_spinlock, true); - #endif - dwc2->gintsts = GINTSTS_USBRST; - handle_bus_reset(rhport); - #if TUP_MCU_MULTIPLE_CORE + osal_spin_lock(&_dcd_spinlock, true); + handle_bus_reset(rhport); osal_spin_unlock(&_dcd_spinlock, true); - #endif } if (gintsts & GINTSTS_ENUMDNE) { diff --git a/src/portable/synopsys/dwc2/dwc2_esp32.h b/src/portable/synopsys/dwc2/dwc2_esp32.h index 3309760ff..49b8c54cb 100644 --- a/src/portable/synopsys/dwc2/dwc2_esp32.h +++ b/src/portable/synopsys/dwc2/dwc2_esp32.h @@ -55,8 +55,8 @@ static const dwc2_controller_t _dwc2_controller[] = { // On ESP32 for consistency we associate // - Port0 to OTG_FS, and Port1 to OTG_HS static const dwc2_controller_t _dwc2_controller[] = { -{ .reg_base = DWC2_FS_REG_BASE, .irqnum = ETS_USB_OTG11_CH0_INTR_SOURCE, .ep_count = 7, .ep_in_count = 5, .ep_fifo_size = 1024 }, -{ .reg_base = DWC2_HS_REG_BASE, .irqnum = ETS_USB_OTG_INTR_SOURCE, .ep_count = 16, .ep_in_count = 8, .ep_fifo_size = 4096 } + { .reg_base = DWC2_FS_REG_BASE, .irqnum = ETS_USB_OTG11_CH0_INTR_SOURCE, .ep_count = 7, .ep_in_count = 5, .ep_fifo_size = 1024 }, + { .reg_base = DWC2_HS_REG_BASE, .irqnum = ETS_USB_OTG_INTR_SOURCE, .ep_count = 16, .ep_in_count = 8, .ep_fifo_size = 4096 } }; #endif -- cgit v1.3.1 From 5551a3e430c1a330ec2a09121abc79fbb7b3c7b0 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 21 May 2025 11:41:06 +0700 Subject: add usbd_spin_lock/unlock for driver usage --- src/device/usbd.c | 22 ++++++++++++++++------ src/device/usbd_pvt.h | 2 ++ src/portable/synopsys/dwc2/dcd_dwc2.c | 19 ++++++++----------- 3 files changed, 26 insertions(+), 17 deletions(-) (limited to 'src/portable') diff --git a/src/device/usbd.c b/src/device/usbd.c index 32de8740b..6e5fcf3b6 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -340,15 +340,16 @@ TU_ATTR_ALWAYS_INLINE static inline usbd_class_driver_t const * get_driver(uint8 enum { RHPORT_INVALID = 0xFFu }; tu_static uint8_t _usbd_rhport = RHPORT_INVALID; -// Event queue -// usbd_int_set() is used as mutex in OS NONE config +static OSAL_SPINLOCK_DEF(_usbd_spin, usbd_int_set); + +// Event queue: usbd_int_set() is used as mutex in OS NONE config OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); -tu_static osal_queue_t _usbd_q; +static osal_queue_t _usbd_q; // Mutex for claiming endpoint #if OSAL_MUTEX_REQUIRED - tu_static osal_mutex_def_t _ubsd_mutexdef; - tu_static osal_mutex_t _usbd_mutex; + static osal_mutex_def_t _ubsd_mutexdef; + static osal_mutex_t _usbd_mutex; #else #define _usbd_mutex NULL #endif @@ -466,7 +467,7 @@ bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { TU_ASSERT(rh_init); TU_LOG_USBD("USBD init on controller %u, speed = %s\r\n", rhport, - rh_init->speed == TUSB_SPEED_HIGH ? "High" : "Full"); + rh_init->speed == TUSB_SPEED_HIGH ? "High" : "Full"); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(dcd_event_t)); TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t)); @@ -475,6 +476,8 @@ bool tud_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { tu_varclr(&_usbd_dev); _usbd_queued_setup = 0; + osal_spin_init(&_usbd_spin); + #if OSAL_MUTEX_REQUIRED // Init device mutex _usbd_mutex = osal_mutex_create(&_ubsd_mutexdef); @@ -1250,6 +1253,13 @@ void usbd_int_set(bool enabled) { } } +void usbd_spin_lock(bool in_isr) { + osal_spin_lock(&_usbd_spin, in_isr); +} +void usbd_spin_unlock(bool in_isr) { + osal_spin_unlock(&_usbd_spin, in_isr); +} + // Parse consecutive endpoint descriptors (IN & OUT) bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in) { diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 190d6fd7f..5c6f9dbee 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -68,6 +68,8 @@ usbd_class_driver_t const* usbd_app_driver_get_cb(uint8_t* driver_count) TU_ATTR typedef bool (*usbd_control_xfer_cb_t)(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request); void usbd_int_set(bool enabled); +void usbd_spin_lock(bool in_isr); +void usbd_spin_unlock(bool in_isr); //--------------------------------------------------------------------+ // USBD Endpoint API diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 19eac6e15..865c51894 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -57,8 +57,6 @@ typedef struct { static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) -static OSAL_SPINLOCK_DEF(_dcd_spinlock, usbd_int_set); - typedef struct { // EP0 transfers are limited to 1 packet - larger sizes has to be split uint16_t ep0_pending[2]; // Index determines direction as tusb_dir_t type @@ -394,7 +392,6 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); tu_memclr(&_dcd_data, sizeof(_dcd_data)); - osal_spin_init(&_dcd_spinlock); // Core Initialization const bool is_highspeed = dwc2_core_is_highspeed(dwc2, TUSB_ROLE_DEVICE); @@ -539,7 +536,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); uint8_t const ep_count = _dwc2_controller[rhport].ep_count; - osal_spin_lock(&_dcd_spinlock, false); + usbd_spin_lock(false); _dcd_data.allocated_epin_count = 0; @@ -560,7 +557,7 @@ void dcd_edpt_close_all(uint8_t rhport) { dfifo_flush_rx(dwc2); dfifo_device_init(rhport); // re-init dfifo - osal_spin_unlock(&_dcd_spinlock, false); + usbd_spin_unlock(false); } bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { @@ -581,7 +578,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - osal_spin_lock(&_dcd_spinlock, false); + usbd_spin_lock(false); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -600,7 +597,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to ret = true; } - osal_spin_unlock(&_dcd_spinlock, false); + usbd_spin_unlock(false); return ret; } @@ -618,7 +615,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t xfer_ctl_t* xfer = XFER_CTL_BASE(epnum, dir); bool ret; - osal_spin_lock(&_dcd_spinlock, false); + usbd_spin_lock(false); if (xfer->max_size == 0) { ret = false; // Endpoint is closed @@ -633,7 +630,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t ret = true; } - osal_spin_unlock(&_dcd_spinlock, false); + usbd_spin_unlock(false); return ret; } @@ -1022,9 +1019,9 @@ void dcd_int_handler(uint8_t rhport) { // USBRST is start of reset. dwc2->gintsts = GINTSTS_USBRST; - osal_spin_lock(&_dcd_spinlock, true); + usbd_spin_lock(true); handle_bus_reset(rhport); - osal_spin_unlock(&_dcd_spinlock, true); + usbd_spin_unlock(true); } if (gintsts & GINTSTS_ENUMDNE) { -- cgit v1.3.1 From 58dfc126ac96d151bc6a9e9ee8bda564b52c350f Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 21 May 2025 14:36:53 +0700 Subject: remove unused dwc2_critical.h --- src/portable/synopsys/dwc2/dwc2_critical.h | 25 ------------------------- 1 file changed, 25 deletions(-) delete mode 100644 src/portable/synopsys/dwc2/dwc2_critical.h (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_critical.h b/src/portable/synopsys/dwc2/dwc2_critical.h deleted file mode 100644 index e2508c8fd..000000000 --- a/src/portable/synopsys/dwc2/dwc2_critical.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD - * - * SPDX-License-Identifier: Apache-2.0 - */ - -#ifndef TUSB_DWC2_CRITICAL_H_ -#define TUSB_DWC2_CRITICAL_H_ - -#include "common/tusb_mcu.h" - -#if defined(TUP_USBIP_DWC2_ESP32) - #include "freertos/FreeRTOS.h" - static portMUX_TYPE dcd_lock = portMUX_INITIALIZER_UNLOCKED; - #define DCD_ENTER_CRITICAL() portENTER_CRITICAL(&dcd_lock) - #define DCD_EXIT_CRITICAL() portEXIT_CRITICAL(&dcd_lock) - -#else - // Define critical section macros for DWC2 as no-op if not defined - // This is to avoid breaking existing code that does not use critical section - #define DCD_ENTER_CRITICAL() // no-op - #define DCD_EXIT_CRITICAL() // no-op -#endif - -#endif // TUSB_DWC2_CRITICAL_H_ -- cgit v1.3.1 From e41a63c60dbebd9579698e6444bc62cfa518e15c Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 21 May 2025 15:27:18 +0700 Subject: add usbh_spin_lock/unlock() use spinlock instead of atomic flag for hcd max3421 --- .../boards/adafruit_feather_esp32c6/board.cmake | 3 + .../boards/adafruit_feather_esp32c6/board.h | 56 ++++++++++++++++++ hw/bsp/espressif/boards/family.c | 2 + src/host/usbh.c | 13 ++++ src/host/usbh_pvt.h | 3 + src/portable/analog/max3421/hcd_max3421.c | 69 ++++++++++++++++------ 6 files changed, 129 insertions(+), 17 deletions(-) create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.cmake create mode 100644 hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.h (limited to 'src/portable') diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.cmake b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.cmake new file mode 100644 index 000000000..9adaefb17 --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.cmake @@ -0,0 +1,3 @@ +# Apply board specific content here +set(IDF_TARGET "esp32c6") +set(MAX3421_HOST 1) diff --git a/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.h b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.h new file mode 100644 index 000000000..18b51410d --- /dev/null +++ b/hw/bsp/espressif/boards/adafruit_feather_esp32c6/board.h @@ -0,0 +1,56 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: Adafruit Feather EPS32-C6 + url: https://www.adafruit.com/product/5933 +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define NEOPIXEL_PIN 15 + +#define BUTTON_PIN 9 +#define BUTTON_STATE_ACTIVE 0 + +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI2_HOST +#define MAX3421_SCK_PIN 21 +#define MAX3421_MOSI_PIN 22 +#define MAX3421_MISO_PIN 23 +#define MAX3421_CS_PIN 8 +#define MAX3421_INTR_PIN 7 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index cf11e2441..8f6c4bee2 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -49,7 +49,9 @@ static led_strip_handle_t led_strip; static void max3421_init(void); #endif +#if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32P4) static bool usb_init(void); +#endif //--------------------------------------------------------------------+ // Implementation diff --git a/src/host/usbh.c b/src/host/usbh.c index b7d5a05f2..f2e5c1f0e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -147,6 +147,9 @@ static osal_mutex_t _usbh_mutex; #define _usbh_mutex NULL #endif +// Spinlock for interrupt handler +static OSAL_SPINLOCK_DEF(_usbh_spin, usbh_int_set); + // Event queue: usbh_int_set() is used as mutex in OS NONE config OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; @@ -424,6 +427,8 @@ bool tuh_rhport_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { TU_LOG_INT_USBH(sizeof(tu_fifo_t)); TU_LOG_INT_USBH(sizeof(tu_edpt_stream_t)); + osal_spin_init(&_usbh_spin); + // Event queue _usbh_q = osal_queue_create(&_usbh_qdef); TU_ASSERT(_usbh_q != NULL); @@ -895,6 +900,14 @@ void usbh_int_set(bool enabled) { } } +void usbh_spin_lock(bool in_isr) { + osal_spin_lock(&_usbh_spin, in_isr); +} + +void usbh_spin_unlock(bool in_isr) { + osal_spin_unlock(&_usbh_spin, in_isr); +} + void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr) { hcd_event_t event = { 0 }; event.event_id = USBH_EVENT_FUNC_CALL; diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index 61b012493..cb092e5f3 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -71,6 +71,9 @@ void usbh_int_set(bool enabled); void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr); +void usbh_spin_lock(bool in_isr); +void usbh_spin_unlock(bool in_isr); + //--------------------------------------------------------------------+ // USBH Endpoint API //--------------------------------------------------------------------+ diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index bb33200f2..971dbd62e 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -28,9 +28,9 @@ #if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 -#include #include "host/hcd.h" #include "host/usbh.h" +#include "host/usbh_pvt.h" //--------------------------------------------------------------------+ // @@ -233,7 +233,7 @@ typedef struct { uint8_t hxfr; }sndfifo_owner; - atomic_flag busy; // busy transferring + bool busy_lock; // busy transferring #if OSAL_MUTEX_REQUIRED OSAL_MUTEX_DEF(spi_mutexdef); @@ -327,7 +327,9 @@ TU_ATTR_ALWAYS_INLINE static inline void mode_write(uint8_t rhport, uint8_t data } TU_ATTR_ALWAYS_INLINE static inline void peraddr_write(uint8_t rhport, uint8_t data, bool in_isr) { - if ( _hcd_data.peraddr == data ) return; // no need to change address + if (_hcd_data.peraddr == data) { + return; // no need to change address + } _hcd_data.peraddr = data; reg_write(rhport, PERADDR_ADDR, data, in_isr); @@ -373,7 +375,7 @@ TU_ATTR_ALWAYS_INLINE static inline void hwfifo_setup(uint8_t rhport, const uint static void hwfifo_receive(uint8_t rhport, uint8_t * buffer, uint16_t len, bool in_isr) { uint8_t hirq; - uint8_t const reg = RCVVFIFO_ADDR; + const uint8_t reg = RCVVFIFO_ADDR; max3421_spi_lock(rhport, in_isr); @@ -389,7 +391,7 @@ static void hwfifo_receive(uint8_t rhport, uint8_t * buffer, uint16_t len, bool //--------------------------------------------------------------------+ static max3421_ep_t* find_ep_not_addr0(uint8_t daddr, uint8_t ep_num, uint8_t ep_dir) { - uint8_t const is_out = 1-ep_dir; + const uint8_t is_out = 1-ep_dir; for(size_t i=1; ixferred_len = 0; ep->state = EP_STATE_ATTEMPT_1; + bool has_xfer = false; + + usbh_spin_lock(false); + if (!_hcd_data.busy_lock) { + _hcd_data.busy_lock = true; + has_xfer = true; + } + usbh_spin_unlock(false); + // carry out transfer if not busy - if (!atomic_flag_test_and_set(&_hcd_data.busy)) { + if (has_xfer) { xact_generic(rhport, ep, true, false); } @@ -781,8 +792,17 @@ bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8] ep->xferred_len = 0; ep->state = EP_STATE_ATTEMPT_1; + bool has_xfer = false; + + usbh_spin_lock(false); + if (!_hcd_data.busy_lock) { + _hcd_data.busy_lock = true; + has_xfer = true; + } + usbh_spin_unlock(false); + // carry out transfer if not busy - if (!atomic_flag_test_and_set(&_hcd_data.busy)) { + if (has_xfer) { xact_setup(rhport, ep, false); } @@ -848,8 +868,8 @@ static void handle_connect_irq(uint8_t rhport, bool in_isr) { } static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t result, uint8_t hrsl, bool in_isr) { - uint8_t const ep_dir = 1-ep->hxfr_bm.is_out; - uint8_t const ep_addr = tu_edpt_addr(ep->hxfr_bm.ep_num, ep_dir); + const uint8_t ep_dir = 1 - ep->hxfr_bm.is_out; + const uint8_t ep_addr = tu_edpt_addr(ep->hxfr_bm.ep_num, ep_dir); // save data toggle if (ep_dir) { @@ -867,7 +887,9 @@ static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t re xact_generic(rhport, next_ep, true, in_isr); }else { // no more pending - atomic_flag_clear(&_hcd_data.busy); + usbh_spin_lock(in_isr); + _hcd_data.busy_lock = false; + usbh_spin_unlock(in_isr); } } @@ -906,7 +928,9 @@ static void handle_xfer_done(uint8_t rhport, bool in_isr) { xact_generic(rhport, next_ep, true, in_isr); } else { // no more pending in this frame -> clear busy - atomic_flag_clear(&_hcd_data.busy); + usbh_spin_lock(in_isr); + _hcd_data.busy_lock = false; + usbh_spin_unlock(in_isr); } return; @@ -997,8 +1021,8 @@ void print_hirq(uint8_t hirq) { // Interrupt handler void hcd_int_handler(uint8_t rhport, bool in_isr) { uint8_t hirq = reg_read(rhport, HIRQ_ADDR, in_isr) & _hcd_data.hien; - if (!hirq) return; -// print_hirq(hirq); + if (!hirq) { return; } + // print_hirq(hirq); if (hirq & HIRQ_FRAME_IRQ) { _hcd_data.frame_count++; @@ -1017,8 +1041,19 @@ void hcd_int_handler(uint8_t rhport, bool in_isr) { } // start usb transfer if not busy - if (ep_retry != NULL && !atomic_flag_test_and_set(&_hcd_data.busy)) { - xact_generic(rhport, ep_retry, true, in_isr); + if (ep_retry != NULL) { + bool has_xfer = false; + + usbh_spin_lock(in_isr); + if (!_hcd_data.busy_lock) { + _hcd_data.busy_lock = true; + has_xfer = true; + } + usbh_spin_unlock(in_isr); + + if (has_xfer) { + xact_generic(rhport, ep_retry, true, in_isr); + } } } -- cgit v1.3.1 From 56c9521abdef663b455a345c99a4f6b22591aa56 Mon Sep 17 00:00:00 2001 From: James Sandison Date: Wed, 4 Jun 2025 11:21:27 +1000 Subject: chore: squash previous commits from other branches --- docs/reference/boards.rst | 2 + docs/reference/dependencies.rst | 1 + examples/build_system/cmake/cpu/cortex-m55.cmake | 26 + examples/build_system/make/cpu/cortex-m55.mk | 28 + examples/device/net_lwip_webserver/skip.txt | 1 + examples/host/bare_api/only.txt | 1 + examples/host/cdc_msc_hid/only.txt | 1 + examples/host/cdc_msc_hid_freertos/only.txt | 1 + examples/host/device_info/only.txt | 1 + examples/host/hid_controller/only.txt | 1 + examples/host/midi_rx/only.txt | 1 + examples/host/msc_file_explorer/only.txt | 1 + hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h | 149 ++ .../stm32n657nucleo/STM32N657XX_AXISRAM2_fsbl.ld | 203 +++ hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake | 25 + hw/bsp/stm32n6/boards/stm32n657nucleo/board.h | 283 ++++ hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk | 23 + .../boards/stm32n657nucleo/tcpp0203/LICENSE.txt | 6 + .../stm32n657nucleo/tcpp0203/Release_Notes.html | 205 +++ .../stm32n657nucleo/tcpp0203/_htmresc/favicon.png | Bin 0 -> 4126 bytes .../tcpp0203/_htmresc/mini-st_2020.css | 1703 ++++++++++++++++++++ .../tcpp0203/_htmresc/st_logo_2020.png | Bin 0 -> 7520 bytes .../boards/stm32n657nucleo/tcpp0203/tcpp0203.c | 886 ++++++++++ .../boards/stm32n657nucleo/tcpp0203/tcpp0203.h | 353 ++++ .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c | 73 + .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h | 98 ++ hw/bsp/stm32n6/family.c | 276 ++++ hw/bsp/stm32n6/family.cmake | 147 ++ hw/bsp/stm32n6/family.mk | 101 ++ hw/bsp/stm32n6/partition_stm32n657xx.h | 792 +++++++++ hw/bsp/stm32n6/stm32n6xx_hal_conf.h | 504 ++++++ hw/bsp/zephyr_board_aliases.cmake | 1 + src/common/tusb_mcu.h | 9 + src/portable/synopsys/dwc2/dcd_dwc2.c | 5 + src/portable/synopsys/dwc2/dwc2_info.py | 1 + src/portable/synopsys/dwc2/dwc2_stm32.h | 11 + src/portable/synopsys/dwc2/hcd_dwc2.c | 4 + src/tusb_option.h | 1 + tools/get_deps.py | 8 +- 39 files changed, 5931 insertions(+), 1 deletion(-) create mode 100644 examples/build_system/cmake/cpu/cortex-m55.cmake create mode 100644 examples/build_system/make/cpu/cortex-m55.mk create mode 100644 hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/STM32N657XX_AXISRAM2_fsbl.ld create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/board.h create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c create mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h create mode 100644 hw/bsp/stm32n6/family.c create mode 100644 hw/bsp/stm32n6/family.cmake create mode 100644 hw/bsp/stm32n6/family.mk create mode 100644 hw/bsp/stm32n6/partition_stm32n657xx.h create mode 100644 hw/bsp/stm32n6/stm32n6xx_hal_conf.h (limited to 'src/portable') diff --git a/docs/reference/boards.rst b/docs/reference/boards.rst index 5786b2182..317a40c9c 100644 --- a/docs/reference/boards.rst +++ b/docs/reference/boards.rst @@ -269,6 +269,8 @@ stm32l412nucleo STM32 L412 Nucleo stm32l4 https://www.st stm32l476disco STM32 L476 Disco stm32l4 https://www.st.com/en/evaluation-tools/32l476gdiscovery.html stm32l4p5nucleo STM32 L4P5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4p5zg.html stm32l4r5nucleo STM32 L4R5 Nucleo stm32l4 https://www.st.com/en/evaluation-tools/nucleo-l4r5zi.html +stm32n657_dk STM32 N657 Discovery Kit stm32n6 https://www.st.com/en/evaluation-tools/stm32n6570-dk.html +stm32n657nucleo STM32 N657 Nucleo stm32n6 https://www.st.com/en/evaluation-tools/nucleo-n657x0-q.html b_u585i_iot2a STM32 B-U585i IOT2A Discovery kit stm32u5 https://www.st.com/en/evaluation-tools/b-u585i-iot02a.html stm32u545nucleo STM32 U545 Nucleo stm32u5 https://www.st.com/en/evaluation-tools/nucleo-u545re-q.html stm32u575eval STM32 U575 Eval stm32u5 https://www.st.com/en/evaluation-tools/stm32u575i-ev.html diff --git a/docs/reference/dependencies.rst b/docs/reference/dependencies.rst index e124466da..98545b4cf 100644 --- a/docs/reference/dependencies.rst +++ b/docs/reference/dependencies.rst @@ -57,6 +57,7 @@ hw/mcu/st/stm32l0xx_hal_driver https://github.com/STMicroelectronics/ hw/mcu/st/stm32l1xx_hal_driver https://github.com/STMicroelectronics/stm32l1xx_hal_driver.git 44efc446fa69ed8344e7fd966e68ed11043b35d9 stm32l1 hw/mcu/st/stm32l4xx_hal_driver https://github.com/STMicroelectronics/stm32l4xx_hal_driver.git aee3d5bf283ae5df87532b781bdd01b7caf256fc stm32l4 hw/mcu/st/stm32l5xx_hal_driver https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git 675c32a75df37f39d50d61f51cb0dcf53f07e1cb stm32l5 +hw/mcu/st/stm32n6xx_hal_driver https://github.com/STMicroelectronics/stm32n6xx-hal-driver.git 49f9989d10cf6817d4b07ac01848956b46bd0fd6 stm32n6 hw/mcu/st/stm32u5xx_hal_driver https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git 4d93097a67928e9377e655ddd14622adc31b9770 stm32u5 hw/mcu/st/stm32wbxx_hal_driver https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git 2c5f06638be516c1b772f768456ba637f077bac8 stm32wb hw/mcu/ti https://github.com/hathach/ti_driver.git 143ed6cc20a7615d042b03b21e070197d473e6e5 msp430 msp432e4 tm4c diff --git a/examples/build_system/cmake/cpu/cortex-m55.cmake b/examples/build_system/cmake/cpu/cortex-m55.cmake new file mode 100644 index 000000000..a7a57957c --- /dev/null +++ b/examples/build_system/cmake/cpu/cortex-m55.cmake @@ -0,0 +1,26 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -mthumb + -mcpu=cortex-m55 + -mfloat-abi=hard + -mfpu=fpv5-d16 + -mcmse + ) + set(FREERTOS_PORT GCC_ARM_CM55_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + --target=arm-none-eabi + -mcpu=cortex-m55 + -mfpu=fpv5-d16 + ) + set(FREERTOS_PORT GCC_ARM_CM55_NTZ_NONSECURE CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + set(TOOLCHAIN_COMMON_FLAGS + --cpu cortex-m55 + --fpu VFPv5_D16 + ) + set(FREERTOS_PORT IAR_ARM_CM55_NTZ_NONSECURE CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/make/cpu/cortex-m55.mk b/examples/build_system/make/cpu/cortex-m55.mk new file mode 100644 index 000000000..de627caed --- /dev/null +++ b/examples/build_system/make/cpu/cortex-m55.mk @@ -0,0 +1,28 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -mthumb \ + -mcpu=cortex-m55 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -mcmse + +else ifeq ($(TOOLCHAIN),clang) + CFLAGS += \ + --target=arm-none-eabi \ + -mcpu=cortex-m55 \ + -mfpu=fpv5-d16 \ + +else ifeq ($(TOOLCHAIN),iar) + CFLAGS += \ + --cpu cortex-m55 \ + --fpu VFPv5_D16 \ + + ASFLAGS += \ + --cpu cortex-m55 \ + --fpu VFPv5_D16 \ + +else + $(error "TOOLCHAIN is not supported") +endif + +FREERTOS_PORTABLE_SRC ?= $(FREERTOS_PORTABLE_PATH)/ARM_CM55_NTZ/non_secure diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index 5ebe71612..c2e0d54ec 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -10,6 +10,7 @@ mcu:SAMD11 mcu:STM32L0 mcu:STM32F0 mcu:KINETIS_KL +mcu:STM32N6 family:broadcom_64bit family:broadcom_32bit family:espressif diff --git a/examples/host/bare_api/only.txt b/examples/host/bare_api/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/bare_api/only.txt +++ b/examples/host/bare_api/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/cdc_msc_hid/only.txt b/examples/host/cdc_msc_hid/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/cdc_msc_hid/only.txt +++ b/examples/host/cdc_msc_hid/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index e3ae25260..4ff3841a4 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -13,3 +13,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index b6f87f423..6e6e2184f 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -18,3 +18,4 @@ mcu:RAXXX mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/hid_controller/only.txt b/examples/host/hid_controller/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/hid_controller/only.txt +++ b/examples/host/hid_controller/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/midi_rx/only.txt b/examples/host/midi_rx/only.txt index b6f87f423..6e6e2184f 100644 --- a/examples/host/midi_rx/only.txt +++ b/examples/host/midi_rx/only.txt @@ -18,3 +18,4 @@ mcu:RAXXX mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/examples/host/msc_file_explorer/only.txt b/examples/host/msc_file_explorer/only.txt index 95f9f1d82..9b8d535e6 100644 --- a/examples/host/msc_file_explorer/only.txt +++ b/examples/host/msc_file_explorer/only.txt @@ -15,3 +15,4 @@ mcu:MAX3421 mcu:STM32F4 mcu:STM32F7 mcu:STM32H7 +mcu:STM32N6 diff --git a/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..9fd3f6c50 --- /dev/null +++ b/hw/bsp/stm32n6/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "stm32h7rsxx.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<ROM + + /* The program code and other data into "RAM" Ram type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + *(.RamFunc) /* .RamFunc sections */ + *(.RamFunc*) /* .RamFunc* sections */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >ROM + + /* Constant data into "RAM" Ram type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >ROM + + .ARM.extab (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >ROM + + .ARM (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >ROM + + .preinit_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >ROM + + .init_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >ROM + + .fini_array (READONLY) : /* The READONLY keyword is only supported in GCC11 and later, remove it if using GCC10 or earlier. */ + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >ROM + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> ROM + + .noncacheable : + { + . = ALIGN(8); + __snoncacheable = .;/* create symbol for start of section */ + KEEP(*(.noncacheable)) + . = ALIGN(8); + __enoncacheable = .; /* create symbol for end of section */ + } > RAM + + + .gnu.sgstubs : + { + . = ALIGN(4); + *(.gnu.sgstubs*) /* Secure Gateway stubs */ + . = ALIGN(4); + } >ROM + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake new file mode 100644 index 000000000..197b5108f --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake @@ -0,0 +1,25 @@ +set(MCU_VARIANT stm32n657xx) +set(JLINK_DEVICE stm32n6xx) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32N657XX_LRUN.ld) +set(LD_FILE_Clang ${LD_FILE_GNU}) + +set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + +function(update_board TARGET) + + target_compile_definitions(${TARGET} PUBLIC + STM32N6xx + SEGGER_RTT_SECTION="noncacheable_buffer" + BUFFER_SIZE_UP=0x3000 + ) + + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203_reg.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203 + ) +endfunction() diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h new file mode 100644 index 000000000..d3781c6d0 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.h @@ -0,0 +1,283 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: STM32 H723 Nucleo + url: https://www.st.com/en/evaluation-tools/nucleo-h723zg.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "stm32n657xx.h" +#include "stm32n6xx_ll_exti.h" +#include "stm32n6xx_ll_system.h" +#include "tcpp0203.h" + +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE + +#define BOARD_TUD_RHPORT 1 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 1 + +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_TCPP0203_EN 4 + +static board_pindef_t board_pindef[] = { + {// LED + .port = GPIOG, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + .active_state = 1}, + {// Button + .port = GPIOC, + .pin_init = {.Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + .active_state = 1}, + {// UART TX + .port = GPIOE, + .pin_init = {.Pin = GPIO_PIN_5, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF7_USART1}, + .active_state = 0}, + {// UART RX + .port = GPIOE, + .pin_init = {.Pin = GPIO_PIN_6, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF7_USART1}, + .active_state = 0}, + {// VBUS input pin used for TCPP0203 EN + .port = GPIOA, + .pin_init = {.Pin = GPIO_PIN_7, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + .active_state = 0}, + { + // I2C SCL for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + }, + { + // I2C SDA for TCPP0203 + .port = GPIOB, + .pin_init = {.Pin = GPIO_PIN_11, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = GPIO_AF4_I2C2}, + }, + { + // INT for TCPP0203 + .port = GPIOD, + .pin_init = {.Pin = GPIO_PIN_2, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0}, + }, +}; + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + /* Configure the power domain */ + if (HAL_PWREx_ConfigSupply(PWR_EXTERNAL_SOURCE_SUPPLY) != HAL_OK) { + Error_Handler(); + } + + /* Get current CPU/System buses clocks configuration */ + /* and if necessary switch to intermediate HSI clock */ + /* to ensure target clock can be set */ + HAL_RCC_GetClockConfig(&RCC_ClkInitStruct); + if ((RCC_ClkInitStruct.CPUCLKSource == RCC_CPUCLKSOURCE_IC1) || + (RCC_ClkInitStruct.SYSCLKSource == RCC_SYSCLKSOURCE_IC2_IC6_IC11)) { + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_CPUCLK | RCC_CLOCKTYPE_SYSCLK); + RCC_ClkInitStruct.CPUCLKSource = RCC_CPUCLKSOURCE_HSI; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK) { + Error_Handler(); + } + } + + /* HSE selected as source (stable clock on Level 0 samples */ + /* PLL1 output = ((HSE/PLLM)*PLLN)/PLLP1/PLLP2 */ + /* = ((48000000/3)*75)/1/1 */ + /* = (16000000*75)/1/1 */ + /* = 1200000000 (1200 MHz) */ + /* PLL2 off */ + /* PLL3 off */ + /* PLL4 off */ + + /* Enable HSE && HSI */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* 48 MHz */ + + RCC_OscInitStruct.PLL1.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL1.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL1.PLLM = 3; + RCC_OscInitStruct.PLL1.PLLN = 75; /* PLL1 VCO = 48/3 * 75 = 1200MHz */ + RCC_OscInitStruct.PLL1.PLLP1 = 1; /* PLL output = PLL VCO frequency / (PLLP1 * PLLP2) */ + RCC_OscInitStruct.PLL1.PLLP2 = 1; /* PLL output = 1200 MHz */ + RCC_OscInitStruct.PLL1.PLLFractional = 0; + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { + /* Initialization error */ + Error_Handler(); + } + + /* Select PLL1 outputs as CPU and System bus clock source */ + /* CPUCLK = ic1_ck = PLL1 output/ic1_divider = 600 MHz */ + /* SYSCLK = ic2_ck = PLL1 output/ic2_divider = 400 MHz */ + /* Configure the HCLK clock divider */ + /* HCLK = PLL1 SYSCLK/HCLK divider = 200 MHz */ + /* PCLKx = HCLK / PCLKx divider = 200 MHz */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_CPUCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | + RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_PCLK4 | RCC_CLOCKTYPE_PCLK5); + RCC_ClkInitStruct.CPUCLKSource = RCC_CPUCLKSOURCE_IC1; + RCC_ClkInitStruct.IC1Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC1Selection.ClockDivider = 2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_IC2_IC6_IC11; + RCC_ClkInitStruct.IC2Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC2Selection.ClockDivider = 3; + RCC_ClkInitStruct.IC6Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC6Selection.ClockDivider = 3; + RCC_ClkInitStruct.IC11Selection.ClockSelection = RCC_ICCLKSOURCE_PLL1; + RCC_ClkInitStruct.IC11Selection.ClockDivider = 3; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV1; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV1; + RCC_ClkInitStruct.APB5CLKDivider = RCC_APB5_DIV1; + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct) != HAL_OK) { + /* Initialization Error */ + Error_Handler(); + } + + /** Initializes the peripherals clock + */ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USBOTGHS1; + PeriphClkInitStruct.UsbOtgHs1ClockSelection = RCC_USBPHY1REFCLKSOURCE_HSE_DIRECT; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { + /* Initialization Error */ + Error_Handler(); + } + + /** Set USB OTG HS PHY1 Reference Clock Source */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USBPHY1; + PeriphClkInitStruct.UsbPhy1ClockSelection = RCC_USBPHY1REFCLKSOURCE_HSE_DIRECT; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { + /* Initialization Error */ + Error_Handler(); + } +} + +//--------------------------------------------------------------------+ +// USB PD +//--------------------------------------------------------------------+ +static I2C_HandleTypeDef i2c_handle = { + .Instance = I2C2, + .Init = { + .Timing = 0x20C0EDFF, + .OwnAddress1 = 0, + .AddressingMode = I2C_ADDRESSINGMODE_7BIT, + .DualAddressMode = I2C_DUALADDRESS_DISABLE, + .OwnAddress2 = 0, + .OwnAddress2Masks = I2C_OA2_NOMASK, + .GeneralCallMode = I2C_GENERALCALL_DISABLE, + .NoStretchMode = I2C_NOSTRETCH_DISABLE, + }}; +static TCPP0203_Object_t tcpp0203_obj = {0}; + +int32_t board_tcpp0203_init(void) { + board_pindef_t *pindef = &board_pindef[PINID_TCPP0203_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, GPIO_PIN_SET); + + __HAL_RCC_I2C2_CLK_ENABLE(); + __HAL_RCC_I2C2_FORCE_RESET(); + __HAL_RCC_I2C2_RELEASE_RESET(); + if (HAL_I2C_Init(&i2c_handle) != HAL_OK) { + return HAL_ERROR; + } + + NVIC_SetPriority(EXTI8_IRQn, 12); + NVIC_EnableIRQ(EXTI8_IRQn); + + return 0; +} + +int32_t board_tcpp0203_deinit(void) { + return 0; +} + +int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +static inline void board_init2(void) { + TCPP0203_IO_t io_ctx; + + io_ctx.Address = TCPP0203_I2C_ADDRESS_X68; + io_ctx.Init = board_tcpp0203_init; + io_ctx.DeInit = board_tcpp0203_deinit; + io_ctx.ReadReg = i2c_readreg; + io_ctx.WriteReg = i2c_writereg; + + TU_ASSERT(TCPP0203_RegisterBusIO(&tcpp0203_obj, &io_ctx) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_Init(&tcpp0203_obj) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) state; + if (rhport == 1) { + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +void EXTI8_IRQHandler(void) { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_8); + if (tcpp0203_obj.IsInitialized) { + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk new file mode 100644 index 000000000..b851da0ca --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk @@ -0,0 +1,23 @@ +MCU_VARIANT = stm32n6xx +CFLAGS += -DSTM32N6xx + +# For flash-jlink target +JLINK_DEVICE = stm32n6xx + +# flash target using on-board stlink +flash: flash-stlink + +PORT = 1 + + +SRC_C += \ + $(BOARD_PATH)/tcpp0203/tcpp0203.c \ + $(BOARD_PATH)/tcpp0203/tcpp0203_reg.c \ + +INC += \ + $(TOP)/$(BOARD_PATH)/tcpp0203 \ + +CFLAGS += \ + -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ + -DSTM32N657xx + -DBUFFER_SIZE_UP=0x3000 \ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt new file mode 100644 index 000000000..1cbbc544a --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt @@ -0,0 +1,6 @@ +This software component is provided to you as part of a software package and +applicable license terms are in the Package_license file. If you received this +software component outside of a package or without applicable license terms, +the terms of the BSD-3-Clause license shall apply. +You may obtain a copy of the BSD-3-Clause at: +https://opensource.org/licenses/BSD-3-Clause diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html new file mode 100644 index 000000000..6bbba86a4 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html @@ -0,0 +1,205 @@ + + + + + + + Release Notes for TCPP0203 Component Driver + + + + + + +
+
+
+

Release Notes for TCPP0203 Component Driver

+

Copyright © 2020 STMicroelectronics
+

+ +
+

Purpose

+

This driver provides a set of functions needed to drive TCPP0203 Type-C Port Protection component

+
+
+

Update History

+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + +
Headline
MISRA Rule-81.13 correction on TCPP0203 component driver files
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
MISRA corrections on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.8.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
License updates
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.6.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
CodeSpell correction on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.5.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+

Maintenance release

+

Contents

+ + + + + + + + + + + + +
Fixed bugs list
Headline
MCUAstyle correction on TCPP0203 component driver files
+

Known Limitations

+

Outstanding bugs list : None

+

Requirements not met or planned in a forthcoming release : None

+

Development Toolchains and Compilers

+
    +
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • +
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • +
  • STM32CubeIDE toolchain V1.5.0
    • +
+

Backward compatibility

+

No compatibility break with previous version

+

Dependencies

+
+
+
+ +
+

Main Changes

+
    +
  • First official release of TCPP0203 Type-C port Protection Component drivers
    • +
+
+
+
+
+
+

For complete documentation on STM32,visit: [www.st.com/stm32]

+This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. +
+ + diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png new file mode 100644 index 000000000..06713eec4 Binary files /dev/null and b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css new file mode 100644 index 000000000..dd19969d1 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css @@ -0,0 +1,1703 @@ +@charset "UTF-8"; +/* + Flavor name: Custom (mini-custom) + Generated online - https://minicss.org/flavors + mini.css version: v3.0.1 +*/ +/* + Browsers resets and base typography. +*/ +/* Core module CSS variable definitions */ +:root { + --fore-color: #03234b; + --secondary-fore-color: #03234b; + --back-color: #ffffff; + --secondary-back-color: #ffffff; + --blockquote-color: #e6007e; + --pre-color: #e6007e; + --border-color: #3cb4e6; + --secondary-border-color: #3cb4e6; + --heading-ratio: 1.2; + --universal-margin: 0.5rem; + --universal-padding: 0.25rem; + --universal-border-radius: 0.075rem; + --background-margin: 1.5%; + --a-link-color: #3cb4e6; + --a-visited-color: #8c0078; } + +html { + font-size: 13.5px; } + +a, b, del, em, i, ins, q, span, strong, u { + font-size: 1em; } + +html, * { + font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; + line-height: 1.25; + -webkit-text-size-adjust: 100%; } + +* { + font-size: 1rem; } + +body { + margin: 0; + color: var(--fore-color); + @background: var(--back-color); + background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; + background-size: var(--background-margin); + } + +details { + display: block; } + +summary { + display: list-item; } + +abbr[title] { + border-bottom: none; + text-decoration: underline dotted; } + +input { + overflow: visible; } + +img { + max-width: 100%; + height: auto; } + +h1, h2, h3, h4, h5, h6 { + line-height: 1.25; + margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); + font-weight: 400; } + h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { + color: var(--secondary-fore-color); + display: block; + margin-top: -0.25rem; } + +h1 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } + +h2 { + font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); + border-style: none none solid none ; + border-width: thin; + border-color: var(--border-color); } +h3 { + font-size: calc(1rem * var(--heading-ratio) ); } + +h4 { + font-size: calc(1rem * var(--heading-ratio)); } + +h5 { + font-size: 1rem; } + +h6 { + font-size: calc(1rem / var(--heading-ratio)); } + +p { + margin: var(--universal-margin); } + +ol, ul { + margin: var(--universal-margin); + padding-left: calc(3 * var(--universal-margin)); } + +b, strong { + font-weight: 700; } + +hr { + box-sizing: content-box; + border: 0; + line-height: 1.25em; + margin: var(--universal-margin); + height: 0.0714285714rem; + background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } + +blockquote { + display: block; + position: relative; + font-style: italic; + color: var(--secondary-fore-color); + margin: var(--universal-margin); + padding: calc(3 * var(--universal-padding)); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.3rem solid var(--blockquote-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + blockquote:before { + position: absolute; + top: calc(0rem - var(--universal-padding)); + left: 0; + font-family: sans-serif; + font-size: 2rem; + font-weight: 800; + content: "\201c"; + color: var(--blockquote-color); } + blockquote[cite]:after { + font-style: normal; + font-size: 0.75em; + font-weight: 700; + content: "\a— " attr(cite); + white-space: pre; } + +code, kbd, pre, samp { + font-family: Menlo, Consolas, monospace; + font-size: 0.85em; } + +code { + background: var(--secondary-back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +kbd { + background: var(--fore-color); + color: var(--back-color); + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } + +pre { + overflow: auto; + background: var(--secondary-back-color); + padding: calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + border: 0.0714285714rem solid var(--secondary-border-color); + border-left: 0.2857142857rem solid var(--pre-color); + border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } + +sup, sub, code, kbd { + line-height: 0; + position: relative; + vertical-align: baseline; } + +small, sup, sub, figcaption { + font-size: 0.75em; } + +sup { + top: -0.5em; } + +sub { + bottom: -0.25em; } + +figure { + margin: var(--universal-margin); } + +figcaption { + color: var(--secondary-fore-color); } + +a { + text-decoration: none; } + a:link { + color: var(--a-link-color); } + a:visited { + color: var(--a-visited-color); } + a:hover, a:focus { + text-decoration: underline; } + +/* + Definitions for the grid system, cards and containers. +*/ +.container { + margin: 0 auto; + padding: 0 calc(1.5 * var(--universal-padding)); } + +.row { + box-sizing: border-box; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + margin: 0 0 0 var(--background-margin); } + +.col-sm, +[class^='col-sm-'], +[class^='col-sm-offset-'], +.row[class*='cols-sm-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + +.col-sm, +.row.cols-sm > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + +.col-sm-1, +.row.cols-sm-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + +.col-sm-offset-0 { + margin-left: 0; } + +.col-sm-2, +.row.cols-sm-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + +.col-sm-offset-1 { + margin-left: 8.3333333333%; } + +.col-sm-3, +.row.cols-sm-3 > * { + max-width: 25%; + flex-basis: 25%; } + +.col-sm-offset-2 { + margin-left: 16.6666666667%; } + +.col-sm-4, +.row.cols-sm-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + +.col-sm-offset-3 { + margin-left: 25%; } + +.col-sm-5, +.row.cols-sm-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + +.col-sm-offset-4 { + margin-left: 33.3333333333%; } + +.col-sm-6, +.row.cols-sm-6 > * { + max-width: 50%; + flex-basis: 50%; } + +.col-sm-offset-5 { + margin-left: 41.6666666667%; } + +.col-sm-7, +.row.cols-sm-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + +.col-sm-offset-6 { + margin-left: 50%; } + +.col-sm-8, +.row.cols-sm-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + +.col-sm-offset-7 { + margin-left: 58.3333333333%; } + +.col-sm-9, +.row.cols-sm-9 > * { + max-width: 75%; + flex-basis: 75%; } + +.col-sm-offset-8 { + margin-left: 66.6666666667%; } + +.col-sm-10, +.row.cols-sm-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + +.col-sm-offset-9 { + margin-left: 75%; } + +.col-sm-11, +.row.cols-sm-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + +.col-sm-offset-10 { + margin-left: 83.3333333333%; } + +.col-sm-12, +.row.cols-sm-12 > * { + max-width: 100%; + flex-basis: 100%; } + +.col-sm-offset-11 { + margin-left: 91.6666666667%; } + +.col-sm-normal { + order: initial; } + +.col-sm-first { + order: -999; } + +.col-sm-last { + order: 999; } + +@media screen and (min-width: 500px) { + .col-md, + [class^='col-md-'], + [class^='col-md-offset-'], + .row[class*='cols-md-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-md, + .row.cols-md > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-md-1, + .row.cols-md-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-md-offset-0 { + margin-left: 0; } + + .col-md-2, + .row.cols-md-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-md-offset-1 { + margin-left: 8.3333333333%; } + + .col-md-3, + .row.cols-md-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-md-offset-2 { + margin-left: 16.6666666667%; } + + .col-md-4, + .row.cols-md-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-md-offset-3 { + margin-left: 25%; } + + .col-md-5, + .row.cols-md-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-md-offset-4 { + margin-left: 33.3333333333%; } + + .col-md-6, + .row.cols-md-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-md-offset-5 { + margin-left: 41.6666666667%; } + + .col-md-7, + .row.cols-md-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-md-offset-6 { + margin-left: 50%; } + + .col-md-8, + .row.cols-md-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-md-offset-7 { + margin-left: 58.3333333333%; } + + .col-md-9, + .row.cols-md-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-md-offset-8 { + margin-left: 66.6666666667%; } + + .col-md-10, + .row.cols-md-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-md-offset-9 { + margin-left: 75%; } + + .col-md-11, + .row.cols-md-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-md-offset-10 { + margin-left: 83.3333333333%; } + + .col-md-12, + .row.cols-md-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-md-offset-11 { + margin-left: 91.6666666667%; } + + .col-md-normal { + order: initial; } + + .col-md-first { + order: -999; } + + .col-md-last { + order: 999; } } +@media screen and (min-width: 1280px) { + .col-lg, + [class^='col-lg-'], + [class^='col-lg-offset-'], + .row[class*='cols-lg-'] > * { + box-sizing: border-box; + flex: 0 0 auto; + padding: 0 calc(var(--universal-padding) / 2); } + + .col-lg, + .row.cols-lg > * { + max-width: 100%; + flex-grow: 1; + flex-basis: 0; } + + .col-lg-1, + .row.cols-lg-1 > * { + max-width: 8.3333333333%; + flex-basis: 8.3333333333%; } + + .col-lg-offset-0 { + margin-left: 0; } + + .col-lg-2, + .row.cols-lg-2 > * { + max-width: 16.6666666667%; + flex-basis: 16.6666666667%; } + + .col-lg-offset-1 { + margin-left: 8.3333333333%; } + + .col-lg-3, + .row.cols-lg-3 > * { + max-width: 25%; + flex-basis: 25%; } + + .col-lg-offset-2 { + margin-left: 16.6666666667%; } + + .col-lg-4, + .row.cols-lg-4 > * { + max-width: 33.3333333333%; + flex-basis: 33.3333333333%; } + + .col-lg-offset-3 { + margin-left: 25%; } + + .col-lg-5, + .row.cols-lg-5 > * { + max-width: 41.6666666667%; + flex-basis: 41.6666666667%; } + + .col-lg-offset-4 { + margin-left: 33.3333333333%; } + + .col-lg-6, + .row.cols-lg-6 > * { + max-width: 50%; + flex-basis: 50%; } + + .col-lg-offset-5 { + margin-left: 41.6666666667%; } + + .col-lg-7, + .row.cols-lg-7 > * { + max-width: 58.3333333333%; + flex-basis: 58.3333333333%; } + + .col-lg-offset-6 { + margin-left: 50%; } + + .col-lg-8, + .row.cols-lg-8 > * { + max-width: 66.6666666667%; + flex-basis: 66.6666666667%; } + + .col-lg-offset-7 { + margin-left: 58.3333333333%; } + + .col-lg-9, + .row.cols-lg-9 > * { + max-width: 75%; + flex-basis: 75%; } + + .col-lg-offset-8 { + margin-left: 66.6666666667%; } + + .col-lg-10, + .row.cols-lg-10 > * { + max-width: 83.3333333333%; + flex-basis: 83.3333333333%; } + + .col-lg-offset-9 { + margin-left: 75%; } + + .col-lg-11, + .row.cols-lg-11 > * { + max-width: 91.6666666667%; + flex-basis: 91.6666666667%; } + + .col-lg-offset-10 { + margin-left: 83.3333333333%; } + + .col-lg-12, + .row.cols-lg-12 > * { + max-width: 100%; + flex-basis: 100%; } + + .col-lg-offset-11 { + margin-left: 91.6666666667%; } + + .col-lg-normal { + order: initial; } + + .col-lg-first { + order: -999; } + + .col-lg-last { + order: 999; } } +/* Card component CSS variable definitions */ +:root { + --card-back-color: #3cb4e6; + --card-fore-color: #03234b; + --card-border-color: #03234b; } + +.card { + display: flex; + flex-direction: column; + justify-content: space-between; + align-self: center; + position: relative; + width: 100%; + background: var(--card-back-color); + color: var(--card-fore-color); + border: 0.0714285714rem solid var(--card-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + overflow: hidden; } + @media screen and (min-width: 320px) { + .card { + max-width: 320px; } } + .card > .sectione { + background: var(--card-back-color); + color: var(--card-fore-color); + box-sizing: border-box; + margin: 0; + border: 0; + border-radius: 0; + border-bottom: 0.0714285714rem solid var(--card-border-color); + padding: var(--universal-padding); + width: 100%; } + .card > .sectione.media { + height: 200px; + padding: 0; + -o-object-fit: cover; + object-fit: cover; } + .card > .sectione:last-child { + border-bottom: 0; } + +/* + Custom elements for card elements. +*/ +@media screen and (min-width: 240px) { + .card.small { + max-width: 240px; } } +@media screen and (min-width: 480px) { + .card.large { + max-width: 480px; } } +.card.fluid { + max-width: 100%; + width: auto; } + +.card.warning { + --card-back-color: #e5b8b7; + --card-fore-color: #3b234b; + --card-border-color: #8c0078; } + +.card.error { + --card-back-color: #464650; + --card-fore-color: #ffffff; + --card-border-color: #8c0078; } + +.card > .sectione.dark { + --card-back-color: #3b234b; + --card-fore-color: #ffffff; } + +.card > .sectione.double-padded { + padding: calc(1.5 * var(--universal-padding)); } + +/* + Definitions for forms and input elements. +*/ +/* Input_control module CSS variable definitions */ +:root { + --form-back-color: #ffe97f; + --form-fore-color: #03234b; + --form-border-color: #3cb4e6; + --input-back-color: #ffffff; + --input-fore-color: #03234b; + --input-border-color: #3cb4e6; + --input-focus-color: #0288d1; + --input-invalid-color: #d32f2f; + --button-back-color: #e2e2e2; + --button-hover-back-color: #dcdcdc; + --button-fore-color: #212121; + --button-border-color: transparent; + --button-hover-border-color: transparent; + --button-group-border-color: rgba(124, 124, 124, 0.54); } + +form { + background: var(--form-back-color); + color: var(--form-fore-color); + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); } + +fieldset { + border: 0.0714285714rem solid var(--form-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 4); + padding: var(--universal-padding); } + +legend { + box-sizing: border-box; + display: table; + max-width: 100%; + white-space: normal; + font-weight: 500; + padding: calc(var(--universal-padding) / 2); } + +label { + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +.input-group { + display: inline-block; } + .input-group.fluid { + display: flex; + align-items: center; + justify-content: center; } + .input-group.fluid > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + @media screen and (max-width: 499px) { + .input-group.fluid { + align-items: stretch; + flex-direction: column; } } + .input-group.vertical { + display: flex; + align-items: stretch; + flex-direction: column; } + .input-group.vertical > input { + max-width: 100%; + flex-grow: 1; + flex-basis: 0px; } + +[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { + height: auto; } + +[type="search"] { + -webkit-appearance: textfield; + outline-offset: -2px; } + +[type="search"]::-webkit-search-cancel-button, +[type="search"]::-webkit-search-decoration { + -webkit-appearance: none; } + +input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], +[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { + box-sizing: border-box; + background: var(--input-back-color); + color: var(--input-fore-color); + border: 0.0714285714rem solid var(--input-border-color); + border-radius: var(--universal-border-radius); + margin: calc(var(--universal-margin) / 2); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + +input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { + border-color: var(--input-focus-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { + border-color: var(--input-invalid-color); + box-shadow: none; } +input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { + background: var(--secondary-back-color); } + +select { + max-width: 100%; } + +option { + overflow: hidden; + text-overflow: ellipsis; } + +[type="checkbox"], [type="radio"] { + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + position: relative; + height: calc(1rem + var(--universal-padding) / 2); + width: calc(1rem + var(--universal-padding) / 2); + vertical-align: text-bottom; + padding: 0; + flex-basis: calc(1rem + var(--universal-padding) / 2) !important; + flex-grow: 0 !important; } + [type="checkbox"]:checked:before, [type="radio"]:checked:before { + position: absolute; } + +[type="checkbox"]:checked:before { + content: '\2713'; + font-family: sans-serif; + font-size: calc(1rem + var(--universal-padding) / 2); + top: calc(0rem - var(--universal-padding)); + left: calc(var(--universal-padding) / 4); } + +[type="radio"] { + border-radius: 100%; } + [type="radio"]:checked:before { + border-radius: 100%; + content: ''; + top: calc(0.0714285714rem + var(--universal-padding) / 2); + left: calc(0.0714285714rem + var(--universal-padding) / 2); + background: var(--input-fore-color); + width: 0.5rem; + height: 0.5rem; } + +:placeholder-shown { + color: var(--input-fore-color); } + +::-ms-placeholder { + color: var(--input-fore-color); + opacity: 0.54; } + +button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { + border-style: none; + padding: 0; } + +button, html [type="button"], [type="reset"], [type="submit"] { + -webkit-appearance: button; } + +button { + overflow: visible; + text-transform: none; } + +button, [type="button"], [type="submit"], [type="reset"], +a.button, label.button, .button, +a[role="button"], label[role="button"], [role="button"] { + display: inline-block; + background: var(--button-back-color); + color: var(--button-fore-color); + border: 0.0714285714rem solid var(--button-border-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); + margin: var(--universal-margin); + text-decoration: none; + cursor: pointer; + transition: background 0.3s; } + button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, + a.button:hover, + a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, + a[role="button"]:hover, + a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { + background: var(--button-hover-back-color); + border-color: var(--button-hover-border-color); } + +input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { + cursor: not-allowed; + opacity: 0.75; } + +.button-group { + display: flex; + border: 0.0714285714rem solid var(--button-group-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { + margin: 0; + max-width: 100%; + flex: 1 1 auto; + text-align: center; + border: 0; + border-radius: 0; + box-shadow: none; } + .button-group > :not(:first-child) { + border-left: 0.0714285714rem solid var(--button-group-border-color); } + @media screen and (max-width: 499px) { + .button-group { + flex-direction: column; } + .button-group > :not(:first-child) { + border: 0; + border-top: 0.0714285714rem solid var(--button-group-border-color); } } + +/* + Custom elements for forms and input elements. +*/ +button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { + --button-back-color: #1976d2; + --button-fore-color: #f8f8f8; } + button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { + --button-hover-back-color: #1565c0; } + +button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { + --button-back-color: #d32f2f; + --button-fore-color: #f8f8f8; } + button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { + --button-hover-back-color: #c62828; } + +button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { + --button-back-color: #308732; + --button-fore-color: #f8f8f8; } + button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { + --button-hover-back-color: #277529; } + +button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { + --button-back-color: #212121; + --button-fore-color: #f8f8f8; } + button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { + --button-hover-back-color: #111; } + +button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { + padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); + margin: var(--universal-margin); } + +button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { + padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); + margin: var(--universal-margin); } + +/* + Definitions for navigation elements. +*/ +/* Navigation module CSS variable definitions */ +:root { + --header-back-color: #03234b; + --header-hover-back-color: #ffd200; + --header-fore-color: #ffffff; + --header-border-color: #3cb4e6; + --nav-back-color: #ffffff; + --nav-hover-back-color: #ffe97f; + --nav-fore-color: #e6007e; + --nav-border-color: #3cb4e6; + --nav-link-color: #3cb4e6; + --footer-fore-color: #ffffff; + --footer-back-color: #03234b; + --footer-border-color: #3cb4e6; + --footer-link-color: #3cb4e6; + --drawer-back-color: #ffffff; + --drawer-hover-back-color: #ffe97f; + --drawer-border-color: #3cb4e6; + --drawer-close-color: #e6007e; } + +header { + height: 2.75rem; + background: var(--header-back-color); + color: var(--header-fore-color); + border-bottom: 0.0714285714rem solid var(--header-border-color); + padding: calc(var(--universal-padding) / 4) 0; + white-space: nowrap; + overflow-x: auto; + overflow-y: hidden; } + header.row { + box-sizing: content-box; } + header .logo { + color: var(--header-fore-color); + font-size: 1.75rem; + padding: var(--universal-padding) calc(2 * var(--universal-padding)); + text-decoration: none; } + header button, header [type="button"], header .button, header [role="button"] { + box-sizing: border-box; + position: relative; + top: calc(0rem - var(--universal-padding) / 4); + height: calc(3.1875rem + var(--universal-padding) / 2); + background: var(--header-back-color); + line-height: calc(3.1875rem - var(--universal-padding) * 1.5); + text-align: center; + color: var(--header-fore-color); + border: 0; + border-radius: 0; + margin: 0; + text-transform: uppercase; } + header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { + background: var(--header-hover-back-color); } + +nav { + background: var(--nav-back-color); + color: var(--nav-fore-color); + border: 0.0714285714rem solid var(--nav-border-color); + border-radius: var(--universal-border-radius); + margin: var(--universal-margin); } + nav * { + padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } + nav a, nav a:visited { + display: block; + color: var(--nav-link-color); + border-radius: var(--universal-border-radius); + transition: background 0.3s; } + nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { + text-decoration: none; + background: var(--nav-hover-back-color); } + nav .sublink-1 { + position: relative; + margin-left: calc(2 * var(--universal-padding)); } + nav .sublink-1:before { + position: absolute; + left: calc(var(--universal-padding) - 1 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + nav .sublink-2 { + position: relative; + margin-left: calc(4 * var(--universal-padding)); } + nav .sublink-2:before { + position: absolute; + left: calc(var(--universal-padding) - 3 * var(--universal-padding)); + top: -0.0714285714rem; + content: ''; + height: 100%; + border: 0.0714285714rem solid var(--nav-border-color); + border-left: 0; } + +footer { + background: var(--footer-back-color); + color: var(--footer-fore-color); + border-top: 0.0714285714rem solid var(--footer-border-color); + padding: calc(2 * var(--universal-padding)) var(--universal-padding); + font-size: 0.875rem; } + footer a, footer a:visited { + color: var(--footer-link-color); } + +header.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + top: 0; } + +footer.sticky { + position: -webkit-sticky; + position: sticky; + z-index: 1101; + bottom: 0; } + +.drawer-toggle:before { + display: inline-block; + position: relative; + vertical-align: bottom; + content: '\00a0\2261\00a0'; + font-family: sans-serif; + font-size: 1.5em; } +@media screen and (min-width: 500px) { + .drawer-toggle:not(.persistent) { + display: none; } } + +[type="checkbox"].drawer { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].drawer + * { + display: block; + box-sizing: border-box; + position: fixed; + top: 0; + width: 320px; + height: 100vh; + overflow-y: auto; + background: var(--drawer-back-color); + border: 0.0714285714rem solid var(--drawer-border-color); + border-radius: 0; + margin: 0; + z-index: 1110; + right: -320px; + transition: right 0.3s; } + [type="checkbox"].drawer + * .drawer-close { + position: absolute; + top: var(--universal-margin); + right: var(--universal-margin); + z-index: 1111; + width: 2rem; + height: 2rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].drawer + * .drawer-close:before { + display: block; + content: '\00D7'; + color: var(--drawer-close-color); + position: relative; + font-family: sans-serif; + font-size: 2rem; + line-height: 1; + text-align: center; } + [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { + background: var(--drawer-hover-back-color); } + @media screen and (max-width: 320px) { + [type="checkbox"].drawer + * { + width: 100%; } } + [type="checkbox"].drawer:checked + * { + right: 0; } + @media screen and (min-width: 500px) { + [type="checkbox"].drawer:not(.persistent) + * { + position: static; + height: 100%; + z-index: 1100; } + [type="checkbox"].drawer:not(.persistent) + * .drawer-close { + display: none; } } + +/* + Definitions for the responsive table component. +*/ +/* Table module CSS variable definitions. */ +:root { + --table-border-color: #03234b; + --table-border-separator-color: #03234b; + --table-head-back-color: #03234b; + --table-head-fore-color: #ffffff; + --table-body-back-color: #ffffff; + --table-body-fore-color: #03234b; + --table-body-alt-back-color: #f4f4f4; } + +table { + border-collapse: separate; + border-spacing: 0; + margin: 0; + display: flex; + flex: 0 1 auto; + flex-flow: row wrap; + padding: var(--universal-padding); + padding-top: 0; } + table caption { + font-size: 1rem; + margin: calc(2 * var(--universal-margin)) 0; + max-width: 100%; + flex: 0 0 100%; } + table thead, table tbody { + display: flex; + flex-flow: row wrap; + border: 0.0714285714rem solid var(--table-border-color); } + table thead { + z-index: 999; + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; + border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } + table tbody { + border-top: 0; + margin-top: calc(0 - var(--universal-margin)); + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + table tr { + display: flex; + padding: 0; } + table th, table td { + padding: calc(0.5 * var(--universal-padding)); + font-size: 0.9rem; } + table th { + text-align: left; + background: var(--table-head-back-color); + color: var(--table-head-fore-color); } + table td { + background: var(--table-body-back-color); + color: var(--table-body-fore-color); + border-top: 0.0714285714rem solid var(--table-border-color); } + +table:not(.horizontal) { + overflow: auto; + max-height: 100%; } + table:not(.horizontal) thead, table:not(.horizontal) tbody { + max-width: 100%; + flex: 0 0 100%; } + table:not(.horizontal) tr { + flex-flow: row wrap; + flex: 0 0 100%; } + table:not(.horizontal) th, table:not(.horizontal) td { + flex: 1 0 0%; + overflow: hidden; + text-overflow: ellipsis; } + table:not(.horizontal) thead { + position: sticky; + top: 0; } + table:not(.horizontal) tbody tr:first-child td { + border-top: 0; } + +table.horizontal { + border: 0; } + table.horizontal thead, table.horizontal tbody { + border: 0; + flex: .2 0 0; + flex-flow: row nowrap; } + table.horizontal tbody { + overflow: auto; + justify-content: space-between; + flex: .8 0 0; + margin-left: 0; + padding-bottom: calc(var(--universal-padding) / 4); } + table.horizontal tr { + flex-direction: column; + flex: 1 0 auto; } + table.horizontal th, table.horizontal td { + width: auto; + border: 0; + border-bottom: 0.0714285714rem solid var(--table-border-color); } + table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { + border-top: 0; } + table.horizontal th { + text-align: right; + border-left: 0.0714285714rem solid var(--table-border-color); + border-right: 0.0714285714rem solid var(--table-border-separator-color); } + table.horizontal thead tr:first-child { + padding-left: 0; } + table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td { + border-right: 0.0714285714rem solid var(--table-border-color); } + table.horizontal tbody tr:last-child td:first-child { + border-top-right-radius: 0.25rem; } + table.horizontal tbody tr:last-child td:last-child { + border-bottom-right-radius: 0.25rem; } + table.horizontal thead tr:first-child th:first-child { + border-top-left-radius: 0.25rem; } + table.horizontal thead tr:first-child th:last-child { + border-bottom-left-radius: 0.25rem; } + +@media screen and (max-width: 499px) { + table, table.horizontal { + border-collapse: collapse; + border: 0; + width: 100%; + display: table; } + table thead, table th, table.horizontal thead, table.horizontal th { + border: 0; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + padding: 0; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + table tbody, table.horizontal tbody { + border: 0; + display: table-row-group; } + table tr, table.horizontal tr { + display: block; + border: 0.0714285714rem solid var(--table-border-color); + border-radius: var(--universal-border-radius); + background: #ffffff; + padding: var(--universal-padding); + margin: var(--universal-margin); + margin-bottom: calc(1 * var(--universal-margin)); } + table th, table td, table.horizontal th, table.horizontal td { + width: auto; } + table td, table.horizontal td { + display: block; + border: 0; + text-align: right; } + table td:before, table.horizontal td:before { + content: attr(data-label); + float: left; + font-weight: 600; } + table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { + border-top: 0; } + table tbody tr:last-child td, table.horizontal tbody tr:last-child td { + border-right: 0; } } +table tr:nth-of-type(2n) > td { + background: var(--table-body-alt-back-color); } + +@media screen and (max-width: 500px) { + table tr:nth-of-type(2n) { + background: var(--table-body-alt-back-color); } } +:root { + --table-body-hover-back-color: #90caf9; } + +table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } + +@media screen and (max-width: 500px) { + table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { + background: var(--table-body-hover-back-color); } } +/* + Definitions for contextual background elements, toasts and tooltips. +*/ +/* Contextual module CSS variable definitions */ +:root { + --mark-back-color: #3cb4e6; + --mark-fore-color: #ffffff; } + +mark { + background: var(--mark-back-color); + color: var(--mark-fore-color); + font-size: 0.95em; + line-height: 1em; + border-radius: var(--universal-border-radius); + padding: calc(var(--universal-padding) / 4) var(--universal-padding); } + mark.inline-block { + display: inline-block; + font-size: 1em; + line-height: 1.4; + padding: calc(var(--universal-padding) / 2) var(--universal-padding); } + +:root { + --toast-back-color: #424242; + --toast-fore-color: #fafafa; } + +.toast { + position: fixed; + bottom: calc(var(--universal-margin) * 3); + left: 50%; + transform: translate(-50%, -50%); + z-index: 1111; + color: var(--toast-fore-color); + background: var(--toast-back-color); + border-radius: calc(var(--universal-border-radius) * 16); + padding: var(--universal-padding) calc(var(--universal-padding) * 3); } + +:root { + --tooltip-back-color: #212121; + --tooltip-fore-color: #fafafa; } + +.tooltip { + position: relative; + display: inline-block; } + .tooltip:before, .tooltip:after { + position: absolute; + opacity: 0; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: all 0.3s; + z-index: 1010; + left: 50%; } + .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { + bottom: 75%; } + .tooltip.bottom:before, .tooltip.bottom:after { + top: 75%; } + .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { + opacity: 1; + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); } + .tooltip:before { + content: ''; + background: transparent; + border: var(--universal-margin) solid transparent; + left: calc(50% - var(--universal-margin)); } + .tooltip:not(.bottom):before { + border-top-color: #212121; } + .tooltip.bottom:before { + border-bottom-color: #212121; } + .tooltip:after { + content: attr(aria-label); + color: var(--tooltip-fore-color); + background: var(--tooltip-back-color); + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + white-space: nowrap; + transform: translateX(-50%); } + .tooltip:not(.bottom):after { + margin-bottom: calc(2 * var(--universal-margin)); } + .tooltip.bottom:after { + margin-top: calc(2 * var(--universal-margin)); } + +:root { + --modal-overlay-color: rgba(0, 0, 0, 0.45); + --modal-close-color: #e6007e; + --modal-close-hover-color: #ffe97f; } + +[type="checkbox"].modal { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + [type="checkbox"].modal + div { + position: fixed; + top: 0; + left: 0; + display: none; + width: 100vw; + height: 100vh; + background: var(--modal-overlay-color); } + [type="checkbox"].modal + div .card { + margin: 0 auto; + max-height: 50vh; + overflow: auto; } + [type="checkbox"].modal + div .card .modal-close { + position: absolute; + top: 0; + right: 0; + width: 1.75rem; + height: 1.75rem; + border-radius: var(--universal-border-radius); + padding: var(--universal-padding); + margin: 0; + cursor: pointer; + transition: background 0.3s; } + [type="checkbox"].modal + div .card .modal-close:before { + display: block; + content: '\00D7'; + color: var(--modal-close-color); + position: relative; + font-family: sans-serif; + font-size: 1.75rem; + line-height: 1; + text-align: center; } + [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { + background: var(--modal-close-hover-color); } + [type="checkbox"].modal:checked + div { + display: flex; + flex: 0 1 auto; + z-index: 1200; } + [type="checkbox"].modal:checked + div .card .modal-close { + z-index: 1211; } + +:root { + --collapse-label-back-color: #03234b; + --collapse-label-fore-color: #ffffff; + --collapse-label-hover-back-color: #3cb4e6; + --collapse-selected-label-back-color: #3cb4e6; + --collapse-border-color: var(--collapse-label-back-color); + --collapse-selected-border-color: #ceecf8; + --collapse-content-back-color: #ffffff; + --collapse-selected-label-border-color: #3cb4e6; } + +.collapse { + width: calc(100% - 2 * var(--universal-margin)); + opacity: 1; + display: flex; + flex-direction: column; + margin: var(--universal-margin); + border-radius: var(--universal-border-radius); } + .collapse > [type="radio"], .collapse > [type="checkbox"] { + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); } + .collapse > label { + flex-grow: 1; + display: inline-block; + height: 1.25rem; + cursor: pointer; + transition: background 0.2s; + color: var(--collapse-label-fore-color); + background: var(--collapse-label-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + padding: calc(1.25 * var(--universal-padding)); } + .collapse > label:hover, .collapse > label:focus { + background: var(--collapse-label-hover-back-color); } + .collapse > label + div { + flex-basis: auto; + height: 1px; + width: 1px; + margin: -1px; + overflow: hidden; + position: absolute; + clip: rect(0 0 0 0); + -webkit-clip-path: inset(100%); + clip-path: inset(100%); + transition: max-height 0.3s; + max-height: 1px; } + .collapse > :checked + label { + background: var(--collapse-selected-label-back-color); + border-color: var(--collapse-selected-label-border-color); } + .collapse > :checked + label + div { + box-sizing: border-box; + position: relative; + width: 100%; + height: auto; + overflow: auto; + margin: 0; + background: var(--collapse-content-back-color); + border: 0.0714285714rem solid var(--collapse-selected-border-color); + border-top: 0; + padding: var(--universal-padding); + clip: auto; + -webkit-clip-path: inset(0%); + clip-path: inset(0%); + max-height: 100%; } + .collapse > label:not(:first-of-type) { + border-top: 0; } + .collapse > label:first-of-type { + border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } + .collapse > label:last-of-type:not(:first-of-type) { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + .collapse > label:last-of-type:first-of-type { + border-radius: var(--universal-border-radius); } + .collapse > :checked:last-of-type:not(:first-of-type) + label { + border-radius: 0; } + .collapse > :checked:last-of-type + label + div { + border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } + +/* + Custom elements for contextual background elements, toasts and tooltips. +*/ +mark.tertiary { + --mark-back-color: #3cb4e6; } + +mark.tag { + padding: calc(var(--universal-padding)/2) var(--universal-padding); + border-radius: 1em; } + +/* + Definitions for progress elements and spinners. +*/ +/* Progress module CSS variable definitions */ +:root { + --progress-back-color: #3cb4e6; + --progress-fore-color: #555; } + +progress { + display: block; + vertical-align: baseline; + -webkit-appearance: none; + -moz-appearance: none; + appearance: none; + height: 0.75rem; + width: calc(100% - 2 * var(--universal-margin)); + margin: var(--universal-margin); + border: 0; + border-radius: calc(2 * var(--universal-border-radius)); + background: var(--progress-back-color); + color: var(--progress-fore-color); } + progress::-webkit-progress-value { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress::-webkit-progress-bar { + background: var(--progress-back-color); } + progress::-moz-progress-bar { + background: var(--progress-fore-color); + border-top-left-radius: calc(2 * var(--universal-border-radius)); + border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-webkit-progress-value { + border-radius: calc(2 * var(--universal-border-radius)); } + progress[value="1000"]::-moz-progress-bar { + border-radius: calc(2 * var(--universal-border-radius)); } + progress.inline { + display: inline-block; + vertical-align: middle; + width: 60%; } + +:root { + --spinner-back-color: #ddd; + --spinner-fore-color: #555; } + +@keyframes spinner-donut-anim { + 0% { + transform: rotate(0deg); } + 100% { + transform: rotate(360deg); } } +.spinner { + display: inline-block; + margin: var(--universal-margin); + border: 0.25rem solid var(--spinner-back-color); + border-left: 0.25rem solid var(--spinner-fore-color); + border-radius: 50%; + width: 1.25rem; + height: 1.25rem; + animation: spinner-donut-anim 1.2s linear infinite; } + +/* + Custom elements for progress bars and spinners. +*/ +progress.primary { + --progress-fore-color: #1976d2; } + +progress.secondary { + --progress-fore-color: #d32f2f; } + +progress.tertiary { + --progress-fore-color: #308732; } + +.spinner.primary { + --spinner-fore-color: #1976d2; } + +.spinner.secondary { + --spinner-fore-color: #d32f2f; } + +.spinner.tertiary { + --spinner-fore-color: #308732; } + +/* + Definitions for icons - powered by Feather (https://feathericons.com/). +*/ +span[class^='icon-'] { + display: inline-block; + height: 1em; + width: 1em; + vertical-align: -0.125em; + background-size: contain; + margin: 0 calc(var(--universal-margin) / 4); } + span[class^='icon-'].secondary { + -webkit-filter: invert(25%); + filter: invert(25%); } + span[class^='icon-'].inverse { + -webkit-filter: invert(100%); + filter: invert(100%); } + +span.icon-alert { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-bookmark { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-calendar { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-credit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-edit { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } +span.icon-link { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-help { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-home { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-info { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-lock { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-mail { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } +span.icon-location { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-phone { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-rss { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } +span.icon-search { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-settings { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-share { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-cart { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } +span.icon-upload { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } +span.icon-user { + background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } + +/* + Definitions for utilities and helper classes. +*/ +/* Utility module CSS variable definitions */ +:root { + --generic-border-color: rgba(0, 0, 0, 0.3); + --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } + +.hidden { + display: none !important; } + +.visually-hidden { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } + +.bordered { + border: 0.0714285714rem solid var(--generic-border-color) !important; } + +.rounded { + border-radius: var(--universal-border-radius) !important; } + +.circular { + border-radius: 50% !important; } + +.shadowed { + box-shadow: var(--generic-box-shadow) !important; } + +.responsive-margin { + margin: calc(var(--universal-margin) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-margin { + margin: calc(var(--universal-margin) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-margin { + margin: var(--universal-margin) !important; } } + +.responsive-padding { + padding: calc(var(--universal-padding) / 4) !important; } + @media screen and (min-width: 500px) { + .responsive-padding { + padding: calc(var(--universal-padding) / 2) !important; } } + @media screen and (min-width: 1280px) { + .responsive-padding { + padding: var(--universal-padding) !important; } } + +@media screen and (max-width: 499px) { + .hidden-sm { + display: none !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .hidden-md { + display: none !important; } } +@media screen and (min-width: 1280px) { + .hidden-lg { + display: none !important; } } +@media screen and (max-width: 499px) { + .visually-hidden-sm { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 500px) and (max-width: 1279px) { + .visually-hidden-md { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } +@media screen and (min-width: 1280px) { + .visually-hidden-lg { + position: absolute !important; + width: 1px !important; + height: 1px !important; + margin: -1px !important; + border: 0 !important; + padding: 0 !important; + clip: rect(0 0 0 0) !important; + -webkit-clip-path: inset(100%) !important; + clip-path: inset(100%) !important; + overflow: hidden !important; } } + +/*# sourceMappingURL=mini-custom.css.map */ + +img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } +img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} + +.figure { + display: block; + margin-left: auto; + margin-right: auto; + text-align: center; +} diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png new file mode 100644 index 000000000..d6cebb5ac Binary files /dev/null and b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c new file mode 100644 index 000000000..952ff16c9 --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c @@ -0,0 +1,886 @@ +/** + ****************************************************************************** + * @file tcpp0203.c + * @author MCD Application Team + * @brief This file provides the TCPP02/03 Type-C port protection driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203.h" + +#if defined(_TRACE) +#include "usbpd_core.h" +#include "usbpd_trace.h" +#include "string.h" +#include "stdio.h" +#endif /* _TRACE */ + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TCPP0203 + * @brief This file provides a set of functions needed to drive the + * TCPP02/03 Type-C port protection. + * @{ + */ + +/** @defgroup TCPP0203_Private_Constants Private Constants + * @{ + */ + +/* Compilation option in order to enable/disable a concistency check performed + after each I2C access into TCPP0203 registers : goal is to check that written value in Reg0 + is properly reflected into reg1 register content. + To enable register consistency check, please uncomment below definition. + To disable it, comment below line */ +/* #define TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** @defgroup TCPP0203_Private_Types Private Types + * @{ + */ +/* TCPP02/03 Type-C port protection driver structure initialization */ +TCPP0203_Drv_t TCPP0203_Driver = +{ + TCPP0203_Init, + TCPP0203_DeInit, + TCPP0203_Reset, + TCPP0203_SetVConnSwitch, + TCPP0203_SetGateDriverProvider, + TCPP0203_SetGateDriverConsumer, + TCPP0203_SetPowerMode, + TCPP0203_SetVBusDischarge, + TCPP0203_SetVConnDischarge, + TCPP0203_GetVConnSwitchAck, + TCPP0203_GetGateDriverProviderAck, + TCPP0203_GetGateDriverConsumerAck, + TCPP0203_GetPowerModeAck, + TCPP0203_GetVBusDischargeAck, + TCPP0203_GetVConnDischargeAck, + TCPP0203_GetOCPVConnFlag, + TCPP0203_GetOCPVBusFlag, + TCPP0203_GetOVPVBusFlag, + TCPP0203_GetOVPCCFlag, + TCPP0203_GetOTPFlag, + TCPP0203_GetVBusOkFlag, + TCPP0203_ReadTCPPType, + TCPP0203_ReadVCONNPower, + TCPP0203_WriteCtrlRegister, + TCPP0203_ReadAckRegister, + TCPP0203_ReadFlagRegister, +}; + +/** + * @} + */ + +/** @defgroup TCPP0203_Private_Variables Private Variables + * @{ + */ +static uint8_t TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_03; + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +static uint8_t Reg0_Expected_Value = 0x00; +static uint8_t Reg1_LastRead_Value = 0x00; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ + +/** @defgroup TCPP0203_Private_Function_Prototypes TCPP0203 Private Function Prototypes + * @{ + */ +static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); +static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); + +static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue); +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions + * @{ + */ + +/** + * @brief Register Bus Io to component + * @param Component object pointer + * @retval Status of execution + */ +int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO) +{ + int32_t ret; + + if (pObj == NULL) + { + ret = TCPP0203_ERROR; + } + else + { + pObj->IO.Init = pIO->Init; + pObj->IO.DeInit = pIO->DeInit; + pObj->IO.Address = pIO->Address; + pObj->IO.WriteReg = pIO->WriteReg; + pObj->IO.ReadReg = pIO->ReadReg; + pObj->IO.GetTick = pIO->GetTick; + + pObj->Ctx.ReadReg = TCPP0203_ReadRegWrap; + pObj->Ctx.WriteReg = TCPP0203_WriteRegWrap; + pObj->Ctx.handle = pObj; + + if (pObj->IO.Init != NULL) + { + ret = pObj->IO.Init(); + } + else + { + ret = TCPP0203_ERROR; + } + } + + return ret; +} + +/** + * @brief Initializes the TCPP0203 interface + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_Init(TCPP0203_Object_t *pObj) +{ + int32_t ret = 0; + uint8_t tmp; + + if (pObj->IsInitialized == 0U) + { + /* Read TCPP Device type */ + ret += tcpp0203_read_reg(&pObj->Ctx, TCPP0203_READ_REG2, &tmp, 1); + + if (ret == TCPP0203_OK) + { + TCPP0203_DeviceType = (tmp & TCPP0203_DEVICE_TYPE_MSK); + } + else + { + TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_02; + } + pObj->IsInitialized = 1U; + } + + if (ret != TCPP0203_OK) + { + ret = TCPP0203_ERROR; + } + + return ret; +} + +/** + * @brief Deinitializes the TCPP0203 interface + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj) +{ + if (pObj->IsInitialized == 1U) + { + /* De-Initialize IO BUS layer */ + pObj->IO.DeInit(); + + pObj->IsInitialized = 0U; + } + + return TCPP0203_OK; +} + +/** + * @brief Resets TCPP0203 register (Reg0) + * @param pObj Pointer to component object + * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) + */ +int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj) +{ + int32_t ret = TCPP0203_OK; + uint8_t tmp = TCPP0203_REG0_RST_VALUE; + + /* Write reset values in Reg0 register */ + if (tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1) != TCPP0203_OK) + { + ret = TCPP0203_ERROR; + } + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = TCPP0203_REG0_RST_VALUE; + Reg1_LastRead_Value = TCPP0203_REG0_RST_VALUE; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +/** + * @brief Configure TCPP0203 VConn Switch + * @param pObj Pointer to component object + * @param VConnSwitch VConn Switch requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open + * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 + * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 + * @retval Component status + */ +int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch) +{ + int32_t ret = TCPP0203_OK; + + if ((VConnSwitch != TCPP0203_VCONN_SWITCH_OPEN) + && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC1) + && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC2)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VConn switch setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VConnSwitch, TCPP0203_VCONN_SWITCH_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param GateDriverProvider GDP switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_GD_PROVIDER_SWITCH_OPEN GDP Switch Load Open + * @arg TCPP0203_GD_PROVIDER_SWITCH_CLOSED GDP Switch Load closed + * @retval Component status + */ +int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider) +{ + int32_t ret = TCPP0203_OK; + + if ((GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_OPEN) + && (GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_CLOSED)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update GDP Switch Load setting in Writing register Reg0 */ + if (GateDriverProvider == TCPP0203_GD_PROVIDER_SWITCH_CLOSED) + { + /* If Gate Driver Provider is to be closed, Gate Driver Consumer should be open */ + ret += TCPP0203_ModifyReg0(pObj, (GateDriverProvider | TCPP0203_GD_CONSUMER_SWITCH_OPEN), + (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); + } + else + { + ret += TCPP0203_ModifyReg0(pObj, GateDriverProvider, TCPP0203_GD_PROVIDER_SWITCH_MSK); + } + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Consumer path + * @param pObj Pointer to component object + * @param GateDriverConsumer GDC switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_GD_CONSUMER_SWITCH_OPEN GDC Switch Load Open + * @arg TCPP0203_GD_CONSUMER_SWITCH_CLOSED GDC Switch Load closed + * @retval Component status + */ +int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer) +{ + int32_t ret = TCPP0203_OK; + + /* Check if TCPP type is TCPP03. Otherwise, return error */ + if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) + { + return (TCPP0203_ERROR); + } + + if ((GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_OPEN) + && (GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_CLOSED)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update GDC Switch Load setting in Writing register Reg0 */ + if (GateDriverConsumer == TCPP0203_GD_CONSUMER_SWITCH_CLOSED) + { + /* If Gate Driver Consumer is to be closed, Gate Driver Provider should be open */ + ret += TCPP0203_ModifyReg0(pObj, (GateDriverConsumer | TCPP0203_GD_PROVIDER_SWITCH_OPEN), + (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); + } + else + { + ret += TCPP0203_ModifyReg0(pObj, GateDriverConsumer, TCPP0203_GD_CONSUMER_SWITCH_MSK); + } + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Power Mode + * @param pObj Pointer to component object + * @param PowerMode Power mode requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_POWER_MODE_HIBERNATE Hibernate + * @arg TCPP0203_POWER_MODE_LOWPOWER Low Power + * @arg TCPP0203_POWER_MODE_NORMAL Normal + * @retval Component status + */ +int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode) +{ + int32_t ret = TCPP0203_OK; + + if ((PowerMode != TCPP0203_POWER_MODE_HIBERNATE) + && (PowerMode != TCPP0203_POWER_MODE_LOWPOWER) + && (PowerMode != TCPP0203_POWER_MODE_NORMAL)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update Power Mode setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, PowerMode, TCPP0203_POWER_MODE_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param VBusDischarge VBUS Discharge requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VBUS_DISCHARGE_OFF VBUS Discharge Off + * @arg TCPP0203_VBUS_DISCHARGE_ON VBUS Discharge On + * @retval Component status + */ +int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge) +{ + int32_t ret = TCPP0203_OK; + + if ((VBusDischarge != TCPP0203_VBUS_DISCHARGE_OFF) + && (VBusDischarge != TCPP0203_VBUS_DISCHARGE_ON)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VBUS Discharge setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VBusDischarge, TCPP0203_VBUS_DISCHARGE_MSK); + } + + return ret; +} + +/** + * @brief Configure TCPP0203 Gate Driver for Provider path + * @param pObj Pointer to component object + * @param VConnDischarge GDP switch load requested setting + * This parameter can be one of the following values: + * @arg TCPP0203_VCONN_DISCHARGE_OFF VConn Discharge Off + * @arg TCPP0203_VCONN_DISCHARGE_ON VConn Discharge On + * @retval Component status + */ +int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge) +{ + int32_t ret = TCPP0203_OK; + + if ((VConnDischarge != TCPP0203_VCONN_DISCHARGE_OFF) + && (VConnDischarge != TCPP0203_VCONN_DISCHARGE_ON)) + { + ret = TCPP0203_ERROR; + } + else + { + /* Update VConn Discharge setting in Writing register Reg0 */ + ret += TCPP0203_ModifyReg0(pObj, VConnDischarge, TCPP0203_VCONN_DISCHARGE_MSK); + } + + return ret; +} + +/** + * @brief Get VConn switch Ack value + * @param pObj Pointer to component object + * @param pVConnSwitchAck Pointer on VConn switch Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open Ack + * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 Ack + * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 Ack + * @retval Component status + */ +int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVConnSwitchAck = (tmp & TCPP0203_VCONN_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Gate Driver Provider Ack value + * @param pObj Pointer to component object + * @param pGateDriverProviderAck Pointer on Gate Driver Provider Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN Gate Driver Provider Open Ack + * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED Gate Driver Provider Closed Ack + * @retval Component status + */ +int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pGateDriverProviderAck = (tmp & TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Gate Driver Consumer Ack value + * @param pObj Pointer to component object + * @param pGateDriverConsumerAck Pointer on Gate Driver Consumer Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN Gate Driver Consumer Open Ack + * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED Gate Driver Consumer Closed Ack + * @retval Component status + */ +int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck) +{ + int32_t ret; + uint8_t tmp; + + /* Check if TCPP type is TCPP03. Otherwise, return error */ + if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) + { + return (TCPP0203_ERROR); + } + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pGateDriverConsumerAck = (tmp & TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK); + + return ret; +} + +/** + * @brief Get Power Mode Ack value + * @param pObj Pointer to component object + * @param pPowerModeAck Pointer on Power Mode Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_POWER_MODE_ACK_HIBERNATE Power Mode Hibernate Ack + * @arg TCPP0203_POWER_MODE_ACK_LOWPOWER Power Mode Low Power Ack + * @arg TCPP0203_POWER_MODE_ACK_NORMAL Power Mode Normal Ack + * @retval Component status + */ +int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pPowerModeAck = (tmp & TCPP0203_POWER_MODE_ACK_MSK); + + return ret; +} + +/** + * @brief Get VBUS Discharge Ack value + * @param pObj Pointer to component object + * @param pVBusDischargeAck Pointer on VBUS Discharge Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VBUS_DISCHARGE_ACK_OFF VBUS Discharge Off Ack + * @arg TCPP0203_VBUS_DISCHARGE_ACK_ON VBUS Discharge On Ack + * @retval Component status + */ +int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVBusDischargeAck = (tmp & TCPP0203_VBUS_DISCHARGE_ACK_MSK); + + return ret; +} + +/** + * @brief Get VConn Discharge Ack value + * @param pObj Pointer to component object + * @param pVConnDischargeAck Pointer on VConn Discharge Ack value + * This output parameter can be one of the following values: + * @arg TCPP0203_VCONN_DISCHARGE_ACK_OFF VConn Discharge Off Ack + * @arg TCPP0203_VCONN_DISCHARGE_ACK_ON VConn Discharge On Ack + * @retval Component status + */ +int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + *pVConnDischargeAck = (tmp & TCPP0203_VCONN_DISCHARGE_ACK_MSK); + + return ret; +} + +/** + * @brief Get OCP VConn Flag value + * @param pObj Pointer to component object + * @param pOCPVConnFlag Pointer on OCP VConn Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OCP_VCONN_RESET OCP VConn flag not set + * @arg TCPP0203_FLAG_OCP_VCONN_SET OCP VConn flag set + * @retval Component status + */ +int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOCPVConnFlag = (tmp & TCPP0203_FLAG_OCP_VCONN_MSK); + + return ret; +} + +/** + * @brief Get OCP VBUS Flag value + * @param pObj Pointer to component object + * @param pGetOCPVBusFlag Pointer on OCP VBUS Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OCP_VBUS_RESET OCP VBUS flag not set + * @arg TCPP0203_FLAG_OCP_VBUS_SET OCP VBUS flag set + * @retval Component status + */ +int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pGetOCPVBusFlag = (tmp & TCPP0203_FLAG_OCP_VBUS_MSK); + + return ret; +} + +/** + * @brief Get OVP VBUS Flag value + * @param pObj Pointer to component object + * @param pOVPVBusFlag Pointer on OVP VBUS Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OVP_VBUS_RESET OVP VBUS flag not set + * @arg TCPP0203_FLAG_OVP_VBUS_SET OVP VBUS flag set + * @retval Component status + */ +int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOVPVBusFlag = (tmp & TCPP0203_FLAG_OVP_VBUS_MSK); + + return ret; +} + +/** + * @brief Get OVP CC Flag value + * @param pObj Pointer to component object + * @param pOVPCCFlag Pointer on OVP CC Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OVP_CC_RESET OVP CC flag not set + * @arg TCPP0203_FLAG_OVP_CC_SET OVP CC flag set + * @retval Component status + */ +int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOVPCCFlag = (tmp & TCPP0203_FLAG_OVP_CC_MSK); + + return ret; +} + +/** + * @brief Get Over Temperature Flag value + * @param pObj Pointer to component object + * @param pOTPFlag Pointer on Over Temperature Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_OTP_RESET Over Temperature flag not set + * @arg TCPP0203_FLAG_OTP_SET Over Temperature flag set + * @retval Component status + */ +int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pOTPFlag = (tmp & TCPP0203_FLAG_OTP_MSK); + + return ret; +} + +/** + * @brief Get VBUS OK Flag value + * @param pObj Pointer to component object + * @param pVBusOkFlag Pointer on VBUS OK Flag value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_VBUS_OK_RESET VBUS OK flag not set + * @arg TCPP0203_FLAG_VBUS_OK_SET VBUS OK flag set + * @retval Component status + */ +int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pVBusOkFlag = (tmp & TCPP0203_FLAG_VBUS_OK_MSK); + + return ret; +} + +/** + * @brief Get TCPP0203 Device Type value + * @param pObj Pointer to component object + * @param pTCPPType Pointer on TCPP0203 Device Type value + * This output parameter can be one of the following values: + * @arg TCPP0203_DEVICE_TYPE_02 TCPP02 Type + * @arg TCPP0203_DEVICE_TYPE_03 TCPP03 Type + * @retval Component status + */ +int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pTCPPType = (tmp & TCPP0203_DEVICE_TYPE_MSK); + + return ret; +} + +/** + * @brief Get VConn Power value + * @param pObj Pointer to component object + * @param pVCONNPower Pointer on VConn Power value + * This output parameter can be one of the following values: + * @arg TCPP0203_FLAG_VCONN_PWR_1W OCP VConn flag not set + * @arg TCPP0203_FLAG_VCONN_PWR_0_1W OCP VConn flag set + * @retval Component status + */ +int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower) +{ + int32_t ret; + uint8_t tmp; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); + *pVCONNPower = (tmp & TCPP0203_FLAG_VCONN_PWR_MSK); + + return ret; +} + +/** + * @brief Set complete Ctrl register value (Reg 0) + * @param pObj Pointer to component object + * @param pCtrlRegister Pointer on Ctrl register value + * @retval Component status + */ +int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister) +{ + int32_t ret; + + /* Update value in writing register (reg0) */ + ret = tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, pCtrlRegister, 1); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = *pCtrlRegister; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +/** + * @brief Get complete Ack register value + * @param pObj Pointer to component object + * @param pAckRegister Pointer on Ack register value + * @retval Component status + */ +int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister) +{ + int32_t ret; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, pAckRegister, 1); + + return ret; +} + +/** + * @brief Get complete Flag register value + * @param pObj Pointer to component object + * @param pFlagRegister Pointer on Flag register value + * @retval Component status + */ +int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister) +{ + int32_t ret; + + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, pFlagRegister, 1); + + return ret; +} + +/******************** Static functions ****************************************/ +/** + * @brief Wrap TCPP0203 read function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to read + * @param pData Buffer where Target register value should be stored + * @param Length buffer size to be read + * @retval error status + */ +static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) +{ + const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; + + return pObj->IO.ReadReg(pObj->IO.Address, Reg, pData, Length); +} + +/** + * @brief Wrap TCPP0203 write function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to write + * @param pData Target register value to be written + * @param Length Buffer size to be written + * @retval error status + */ +static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) +{ + const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = *pData; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return pObj->IO.WriteReg(pObj->IO.Address, Reg, pData, Length); +} + +/** + * @brief TCPP0203 register update function to Bus IO function + * @param handle Component object handle + * @param Reg Target register address to write + * @param pData Target register value to be written + * @param Length Buffer size to be written + * @retval error status + */ +static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask) +{ + int32_t ret; + uint8_t tmp; + + /* Read current content of ACK register (reflects content of bits set to 1 in Writing register Reg0) */ + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); + + /* Update only the area dedicated to Mask */ + tmp &= ~(Mask); + tmp |= (Value & Mask); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + Reg0_Expected_Value = tmp; +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + /* Update value in writing register (reg0) */ + ret += tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1); + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) + ret += TCPP0203_CheckReg0Reg1(pObj, Reg0_Expected_Value); +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + + return ret; +} + +#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) +/** + * @brief TCPP0203 register control function between Reg0 and Reg1 value + * @param handle Component object handle + * @param Reg0ExpectedValue Value expected in Reg0 (built after all calls to write functions) + * @retval error status + */ +static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue) +{ + int32_t ret; + + /* Read current content of ACK register (expected to reflect content of bits set to 1 in Writing register Reg0) */ + ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &Reg1_LastRead_Value, 1); + +#ifdef _TRACE + char str[12]; + sprintf(str, "Exp0_0x%02x", Reg0ExpectedValue); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); + sprintf(str, "Reg1_0x%02x", Reg1_LastRead_Value); + USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); +#endif /* _TRACE */ + + /* Control if Reg1 value is same as Reg0 expected one */ + if (Reg1_LastRead_Value != Reg0ExpectedValue) + { + while (1); + } + + return ret; +} +#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h new file mode 100644 index 000000000..271b534fc --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h @@ -0,0 +1,353 @@ +/** + ****************************************************************************** + * @file tcpp0203.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the + * tcpp0203.c driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef TCPP0203_H +#define TCPP0203_H + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203_reg.h" +#include + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Component + * @{ + */ + +/** @addtogroup TCPP0203 + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** @defgroup TCPP0203_Exported_Types TCPP0203 Exported Types + * @{ + */ +typedef int32_t (*TCPP0203_Init_Func)(void); +typedef int32_t (*TCPP0203_DeInit_Func)(void); +typedef int32_t (*TCPP0203_GetTick_Func)(void); +typedef int32_t (*TCPP0203_WriteReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); +typedef int32_t (*TCPP0203_ReadReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); + +typedef struct +{ + TCPP0203_Init_Func Init; + TCPP0203_DeInit_Func DeInit; + uint16_t Address; + TCPP0203_WriteReg_Func WriteReg; + TCPP0203_ReadReg_Func ReadReg; + TCPP0203_GetTick_Func GetTick; +} TCPP0203_IO_t; + + +typedef struct +{ + TCPP0203_IO_t IO; + TCPP0203_ctx_t Ctx; + uint8_t IsInitialized; +} TCPP0203_Object_t; + +typedef struct +{ + int32_t (*Init)(TCPP0203_Object_t *); + int32_t (*DeInit)(TCPP0203_Object_t *); + int32_t (*Reset)(TCPP0203_Object_t *); + int32_t (*SetVConnSwitch)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetGateDriverProvider)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetGateDriverConsumer)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetPowerMode)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetVBusDischarge)(TCPP0203_Object_t *, uint8_t); + int32_t (*SetVConnDischarge)(TCPP0203_Object_t *, uint8_t); + int32_t (*GetVConnSwitchAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetGateDriverProviderAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetGateDriverConsumerAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetPowerModeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVBusDischargeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVConnDischargeAck)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOCPVConnFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOCPVBusFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOVPVBusFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOVPCCFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetOTPFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*GetVBusOkFlag)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadTCPPType)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadVCONNPower)(TCPP0203_Object_t *, uint8_t *); + int32_t (*WriteCtrlRegister)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadAckRegister)(TCPP0203_Object_t *, uint8_t *); + int32_t (*ReadFlagRegister)(TCPP0203_Object_t *, uint8_t *); +} TCPP0203_Drv_t; + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants + * @{ + */ +/** + * @brief TCPP0203 Driver Response codes + */ +#define TCPP0203_OK (0) +#define TCPP0203_ERROR (-1) + +/** + * @brief TCPP0203 possible I2C Addresses + */ +#define TCPP0203_I2C_ADDRESS_X68 (0x68U) +#define TCPP0203_I2C_ADDRESS_X6A (0x6AU) + +/** + * @brief TCPP0203 Reg0 Reset Value + */ +#define TCPP0203_REG0_RST_VALUE TCPP0203_GD_CONSUMER_SWITCH_CLOSED + +/** + * @brief TCPP0203 VCONN Switch + */ +#define TCPP0203_VCONN_SWITCH_POS (0U) +#define TCPP0203_VCONN_SWITCH_MSK (0x03U << TCPP0203_VCONN_SWITCH_POS) +#define TCPP0203_VCONN_SWITCH_OPEN (0x00U) +#define TCPP0203_VCONN_SWITCH_CC1 (0x01U << TCPP0203_VCONN_SWITCH_POS) +#define TCPP0203_VCONN_SWITCH_CC2 (0x02U << TCPP0203_VCONN_SWITCH_POS) + +/** + * @brief TCPP0203 Gate Driver Provider values + */ +#define TCPP0203_GD_PROVIDER_SWITCH_POS (2U) +#define TCPP0203_GD_PROVIDER_SWITCH_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_POS) +#define TCPP0203_GD_PROVIDER_SWITCH_OPEN (0x00U) +#define TCPP0203_GD_PROVIDER_SWITCH_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_MSK) + +/** + * @brief TCPP0203 Gate Driver Consumer values + */ +#define TCPP0203_GD_CONSUMER_SWITCH_POS (3U) +#define TCPP0203_GD_CONSUMER_SWITCH_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_POS) +#define TCPP0203_GD_CONSUMER_SWITCH_CLOSED (0x00U) +#define TCPP0203_GD_CONSUMER_SWITCH_OPEN (TCPP0203_GD_CONSUMER_SWITCH_MSK) + +/** + * @brief TCPP0203 Power Mode values + */ +#define TCPP0203_POWER_MODE_POS (4U) +#define TCPP0203_POWER_MODE_MSK (0x03U << TCPP0203_POWER_MODE_POS) +#define TCPP0203_POWER_MODE_HIBERNATE (0x00U) +#define TCPP0203_POWER_MODE_LOWPOWER (0x02U << TCPP0203_POWER_MODE_POS) +#define TCPP0203_POWER_MODE_NORMAL (0x01U << TCPP0203_POWER_MODE_POS) + +/** + * @brief TCPP0203 VBUS Discharge management + */ +#define TCPP0203_VBUS_DISCHARGE_POS (6U) +#define TCPP0203_VBUS_DISCHARGE_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_POS) +#define TCPP0203_VBUS_DISCHARGE_OFF (0x00U) +#define TCPP0203_VBUS_DISCHARGE_ON (TCPP0203_VBUS_DISCHARGE_MSK) + +/** + * @brief TCPP0203 VConn Discharge management + */ +#define TCPP0203_VCONN_DISCHARGE_POS (7U) +#define TCPP0203_VCONN_DISCHARGE_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_POS) +#define TCPP0203_VCONN_DISCHARGE_OFF (0x00U) +#define TCPP0203_VCONN_DISCHARGE_ON (TCPP0203_VCONN_DISCHARGE_MSK) + +/** + * @brief TCPP0203 VCONN Switch Acknowledge + */ +#define TCPP0203_VCONN_SWITCH_ACK_POS (0U) +#define TCPP0203_VCONN_SWITCH_ACK_MSK (0x03U << TCPP0203_VCONN_SWITCH_ACK_POS) +#define TCPP0203_VCONN_SWITCH_ACK_OPEN (0x00U) +#define TCPP0203_VCONN_SWITCH_ACK_CC1 (0x02U << TCPP0203_VCONN_SWITCH_ACK_POS) +#define TCPP0203_VCONN_SWITCH_ACK_CC2 (0x01U << TCPP0203_VCONN_SWITCH_ACK_POS) + +/** + * @brief TCPP0203 Gate Driver Provider Acknowledge + */ +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_POS (2U) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_ACK_POS) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN (0x00U) +#define TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK) + +/** + * @brief TCPP0203 Gate Driver Consumer Acknowledge + */ +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_POS (3U) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_ACK_POS) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED (0x00U) +#define TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN (TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK) + +/** + * @brief TCPP0203 Power Mode Acknowledge + */ +#define TCPP0203_POWER_MODE_ACK_POS (4U) +#define TCPP0203_POWER_MODE_ACK_MSK (0x03U << TCPP0203_POWER_MODE_ACK_POS) +#define TCPP0203_POWER_MODE_ACK_HIBERNATE (0x00U) +#define TCPP0203_POWER_MODE_ACK_LOWPOWER (0x01U << TCPP0203_POWER_MODE_ACK_POS) +#define TCPP0203_POWER_MODE_ACK_NORMAL (0x02U << TCPP0203_POWER_MODE_ACK_POS) + +/** + * @brief TCPP0203 VBUS Discharge Acknowledge + */ +#define TCPP0203_VBUS_DISCHARGE_ACK_POS (6U) +#define TCPP0203_VBUS_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_ACK_POS) +#define TCPP0203_VBUS_DISCHARGE_ACK_OFF (0x00U) +#define TCPP0203_VBUS_DISCHARGE_ACK_ON (TCPP0203_VBUS_DISCHARGE_ACK_MSK) + +/** + * @brief TCPP0203 VConn Discharge Acknowledge + */ +#define TCPP0203_VCONN_DISCHARGE_ACK_POS (7U) +#define TCPP0203_VCONN_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_ACK_POS) +#define TCPP0203_VCONN_DISCHARGE_ACK_OFF (0x00U) +#define TCPP0203_VCONN_DISCHARGE_ACK_ON (TCPP0203_VCONN_DISCHARGE_ACK_MSK) + +/** + * @brief TCPP0203 OCP Vconn Flag management + */ +#define TCPP0203_FLAG_OCP_VCONN_POS (0U) +#define TCPP0203_FLAG_OCP_VCONN_MSK (0x01U << TCPP0203_FLAG_OCP_VCONN_POS) +#define TCPP0203_FLAG_OCP_VCONN_SET (TCPP0203_FLAG_OCP_VCONN_MSK) +#define TCPP0203_FLAG_OCP_VCONN_RESET (0x00U) + +/** + * @brief TCPP0203 OCP VBUS Flag management + */ +#define TCPP0203_FLAG_OCP_VBUS_POS (1U) +#define TCPP0203_FLAG_OCP_VBUS_MSK (0x01U << TCPP0203_FLAG_OCP_VBUS_POS) +#define TCPP0203_FLAG_OCP_VBUS_SET (TCPP0203_FLAG_OCP_VBUS_MSK) +#define TCPP0203_FLAG_OCP_VBUS_RESET (0x00U) + +/** + * @brief TCPP0203 OVP VBUS Flag management + */ +#define TCPP0203_FLAG_OVP_VBUS_POS (2U) +#define TCPP0203_FLAG_OVP_VBUS_MSK (0x01U << TCPP0203_FLAG_OVP_VBUS_POS) +#define TCPP0203_FLAG_OVP_VBUS_SET (TCPP0203_FLAG_OVP_VBUS_MSK) +#define TCPP0203_FLAG_OVP_VBUS_RESET (0x00U) + +/** + * @brief TCPP0203 OVP CC Flag management + */ +#define TCPP0203_FLAG_OVP_CC_POS (3U) +#define TCPP0203_FLAG_OVP_CC_MSK (0x01U << TCPP0203_FLAG_OVP_CC_POS) +#define TCPP0203_FLAG_OVP_CC_SET (TCPP0203_FLAG_OVP_CC_MSK) +#define TCPP0203_FLAG_OVP_CC_RESET (0x00U) + +/** + * @brief TCPP0203 OTP Flag management + */ +#define TCPP0203_FLAG_OTP_POS (4U) +#define TCPP0203_FLAG_OTP_MSK (0x01U << TCPP0203_FLAG_OTP_POS) +#define TCPP0203_FLAG_OTP_SET (TCPP0203_FLAG_OTP_MSK) +#define TCPP0203_FLAG_OTP_RESET (0x00U) + +/** + * @brief TCPP0203 VBUS OK Flag management + */ +#define TCPP0203_FLAG_VBUS_OK_POS (5U) +#define TCPP0203_FLAG_VBUS_OK_MSK (0x01U << TCPP0203_FLAG_VBUS_OK_POS) +#define TCPP0203_FLAG_VBUS_OK_SET (TCPP0203_FLAG_VBUS_OK_MSK) +#define TCPP0203_FLAG_VBUS_OK_RESET (0x00U) + +/** + * @brief TCPP0203 VConn Power + */ +#define TCPP0203_FLAG_VCONN_PWR_POS (6U) +#define TCPP0203_FLAG_VCONN_PWR_MSK (0x01U << TCPP0203_FLAG_VCONN_PWR_POS) +#define TCPP0203_FLAG_VCONN_PWR_1W (TCPP0203_FLAG_VCONN_PWR_MSK) +#define TCPP0203_FLAG_VCONN_PWR_0_1W (0x00U) + +/** + * @brief TCPP0203 Device Type + */ +#define TCPP0203_DEVICE_TYPE_POS (7U) +#define TCPP0203_DEVICE_TYPE_MSK (0x01U << TCPP0203_DEVICE_TYPE_POS) +#define TCPP0203_DEVICE_TYPE_02 (TCPP0203_DEVICE_TYPE_MSK) +#define TCPP0203_DEVICE_TYPE_03 (0x00U) + +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Macros TCPP0203 Exported Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions + * @{ + */ + +/*------------------------------------------------------------------------------ + TCPP02/03 Type-C port protection functions +------------------------------------------------------------------------------*/ +/* High Layer codec functions */ +int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO); +int32_t TCPP0203_Init(TCPP0203_Object_t *pObj); +int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj); +int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj); +int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch); +int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider); +int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer); +int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode); +int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge); +int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge); +int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck); +int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck); +int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck); +int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck); +int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck); +int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck); +int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag); +int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag); +int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag); +int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag); +int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag); +int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag); +int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType); +int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower); +int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister); +int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister); +int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister); + +/** + * @} + */ + +/* TCPP02/03 Type-C port protection driver structure */ +extern TCPP0203_Drv_t TCPP0203_Driver; + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TCPP0203_H */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c new file mode 100644 index 000000000..8025fa85e --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c @@ -0,0 +1,73 @@ +/** + ****************************************************************************** + * @file tcpp0203_reg.c + * @author MCD Application Team + * @brief This file provides unitary register function to control the TCPP02-03 + * Type-C port protection driver. + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "tcpp0203_reg.h" + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup TCPP0203 + * @brief This file provides a set of functions needed to drive the + * TCPP02/03 Type-C port protection codec. + * @{ + */ + +/************** Generic Function *******************/ +/******************************************************************************* + * Function Name : tcpp0203_read_reg + * Description : Generic Reading function. It must be fulfilled with either + * I2C or SPI reading functions + * Input : Register Address, length of buffer + * Output : data Read + *******************************************************************************/ +int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) +{ + return ctx->ReadReg(ctx->handle, reg, data, length); +} + +/******************************************************************************* + * Function Name : tcpp0203_write_reg + * Description : Generic Writing function. It must be fulfilled with either + * I2C or SPI writing function + * Input : Register Address, data to be written, length of buffer + * Output : None + *******************************************************************************/ +int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) +{ + return ctx->WriteReg(ctx->handle, reg, data, length); +} + +/******************************************************************************/ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h new file mode 100644 index 000000000..92420e1fe --- /dev/null +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h @@ -0,0 +1,98 @@ +/** + ****************************************************************************** + * @file tcpp0203_reg.h + * @author MCD Application Team + * @brief Header of tcpp0203_reg.c + * + ****************************************************************************** + * @attention + * + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef TCPP0203_REG_H +#define TCPP0203_REG_H + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Component + * @{ + */ + +/** @addtogroup TCPP0203 + * @{ + */ + + +/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants + * @{ + */ +/******************************************************************************/ +/****************************** REGISTER MAPPING ******************************/ +/******************************************************************************/ +#define TCPP0203_WRITE_REG 0x00U +#define TCPP0203_PROG_CTRL TCPP0203_WRITE_REG +#define TCPP0203_READ_REG1 0x01U +#define TCPP0203_ACK_REG TCPP0203_READ_REG1 +#define TCPP0203_READ_REG2 0x02U +#define TCPP0203_FLAG_REG TCPP0203_READ_REG2 + +/** + * @} + */ + +/************** Generic Function *******************/ + +typedef int32_t (*TCPP0203_Write_Func)(const void *, uint8_t, uint8_t *, uint8_t); +typedef int32_t (*TCPP0203_Read_Func)(const void *, uint8_t, uint8_t *, uint8_t); + +typedef struct +{ + TCPP0203_Write_Func WriteReg; + TCPP0203_Read_Func ReadReg; + void *handle; +} TCPP0203_ctx_t; + +/******************************************************************************* + * Register : Generic - All + * Address : Generic - All + * Bit Group Name: None + * Permission : W + *******************************************************************************/ +int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); +int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); + +#ifdef __cplusplus +} +#endif + +#endif /* TCPP0203_REG_H */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ diff --git a/hw/bsp/stm32n6/family.c b/hw/bsp/stm32n6/family.c new file mode 100644 index 000000000..0ec1875ac --- /dev/null +++ b/hw/bsp/stm32n6/family.c @@ -0,0 +1,276 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 + * William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: STMicroelectronics +*/ + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-align" +#endif + +#include "stm32n6xx_hal.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" + +TU_ATTR_UNUSED static void Error_Handler(void) { } + +void HardFault_Handler(void); + +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; + +#include "board.h" + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif + +#ifndef SWO_FREQ +#define SWO_FREQ 4000000 +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Despite being call USB2_OTG_FS on some MCUs +// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port +void USB2_OTG_HS_IRQHandler(void) { + tusb_int_handler(0, true); +} + +// Despite being call USB1_OTG_HS on some MCUs +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void USB1_OTG_HS_IRQHandler(void) { + tusb_int_handler(1, true); +} + +void board_init(void) { + + /* Enable BusFault and SecureFault handlers (HardFault is default) */ + SCB->SHCSR |= (SCB_SHCSR_BUSFAULTENA_Msk | SCB_SHCSR_SECUREFAULTENA_Msk); + + HAL_PWREx_EnableVddA(); + HAL_PWREx_EnableVddIO2(); + HAL_PWREx_EnableVddIO3(); + HAL_PWREx_EnableVddIO4(); + HAL_PWREx_EnableVddIO5(); + + HAL_Init(); + + // Implemented in board.h + SystemClock_Config(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPION_CLK_ENABLE(); + __HAL_RCC_GPIOO_CLK_ENABLE(); + __HAL_RCC_GPIOP_CLK_ENABLE(); + __HAL_RCC_GPIOQ_CLK_ENABLE(); + + // HAL_ICACHE_Enable(); + + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } + + NVIC_SetPriority(UCPD1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),5, 0)); + NVIC_EnableIRQ(UCPD1_IRQn); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // Explicitly disable systick to prevent its ISR runs before scheduler start + SysTick->CTRL &= ~1U; + + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + + NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + + +#ifdef UART_DEV + UART_CLK_EN(); + HAL_UART_Init(&UartHandle); +#endif + + + __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + HAL_PWREx_EnableVddUSBVMEN(); + while(__HAL_PWR_GET_FLAG(PWR_FLAG_USB33RDY)); + HAL_PWREx_EnableVddUSB(); + + LL_AHB5_GRP1_ForceReset(0x00800000); + __HAL_RCC_USB1_OTG_HS_FORCE_RESET(); + __HAL_RCC_USB1_OTG_HS_PHY_FORCE_RESET(); + + LL_RCC_HSE_SelectHSEDiv2AsDiv2Clock(); + LL_AHB5_GRP1_ReleaseReset(0x00800000); + + /* Peripheral clock enable */ + __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); + + /* Required few clock cycles before accessing USB PHY Controller Registers */ + HAL_Delay(1); + + USB1_HS_PHYC->USBPHYC_CR &= ~(0x7 << 0x4); + + USB1_HS_PHYC->USBPHYC_CR |= (0x1 << 16) | + (0x2 << 4) | + (0x1 << 2) | + 0x1U; + + __HAL_RCC_USB1_OTG_HS_PHY_RELEASE_RESET(); + + /* Required few clock cycles before Releasing Reset */ + HAL_Delay(1); + + __HAL_RCC_USB1_OTG_HS_RELEASE_RESET(); + + /* Peripheral PHY clock enable */ + __HAL_RCC_USB1_OTG_HS_PHY_CLK_ENABLE(); + + board_init2(); + +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif +} + +uint32_t board_button_read(void) { +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif +} + +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t * stm32_uuid = (volatile uint32_t *) UID_BASE; + uint32_t* id32 = (uint32_t*) (uintptr_t) id; + uint8_t const len = 12; + + id32[0] = stm32_uuid[0]; + id32[1] = stm32_uuid[1]; + id32[2] = stm32_uuid[2]; + + return len; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { +#ifdef UART_DEV + HAL_UART_Transmit(&UartHandle, (uint8_t * )(uintptr_t) + buf, len, 0xffff); + return len; +#else + (void) buf; (void) len; + return -1; +#endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake new file mode 100644 index 000000000..600af7cdb --- /dev/null +++ b/hw/bsp/stm32n6/family.cmake @@ -0,0 +1,147 @@ +include_guard() + +set(ST_FAMILY n6) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m55 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32N6 CACHE INTERNAL "") + +# ---------------------- +# Port & Speed Selection +# ---------------------- +if (NOT DEFINED RHPORT_DEVICE) + set(RHPORT_DEVICE 1) +endif () +if (NOT DEFINED RHPORT_HOST) + set(RHPORT_HOST 1) +endif () + +if (NOT DEFINED RHPORT_SPEED) + set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) +endif () +if (NOT DEFINED RHPORT_DEVICE_SPEED) + list(GET RHPORT_SPEED ${RHPORT_DEVICE} RHPORT_DEVICE_SPEED) +endif () +if (NOT DEFINED RHPORT_HOST_SPEED) + list(GET RHPORT_SPEED ${RHPORT_HOST} RHPORT_HOST_SPEED) +endif () + +cmake_print_variables(RHPORT_DEVICE RHPORT_DEVICE_SPEED RHPORT_HOST RHPORT_HOST_SPEED) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + if(NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash.ld) + endif() + set(LD_FILE_Clang ${LD_FILE_GNU}) + if(NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif() + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}_ns.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_RHPORT=${RHPORT_DEVICE} + BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} + BOARD_TUH_RHPORT=${RHPORT_HOST} + BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32N6 ${RTOS}) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c + ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32n6/family.mk b/hw/bsp/stm32n6/family.mk new file mode 100644 index 000000000..97930e189 --- /dev/null +++ b/hw/bsp/stm32n6/family.mk @@ -0,0 +1,101 @@ +ST_FAMILY = n6 +ST_PREFIX = stm32${ST_FAMILY}xx +ST_PREFIX_LONG = stm32${ST_FAMILY}57xx +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver + +UF2_FAMILY_ID = 0x6db66083 + +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m55 + +# ---------------------- +# Port & Speed Selection +# ---------------------- +RHPORT_SPEED ?= OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED +RHPORT_DEVICE ?= 1 +RHPORT_HOST ?= 1 + +# Determine RHPORT_DEVICE_SPEED if not defined +ifndef RHPORT_DEVICE_SPEED +ifeq ($(RHPORT_DEVICE), 0) + RHPORT_DEVICE_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_DEVICE_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# Determine RHPORT_HOST_SPEED if not defined +ifndef RHPORT_HOST_SPEED +ifeq ($(RHPORT_HOST), 0) + RHPORT_HOST_SPEED = $(firstword $(RHPORT_SPEED)) +else + RHPORT_HOST_SPEED = $(lastword $(RHPORT_SPEED)) +endif +endif + +# -------------- +# Compiler Flags +# -------------- +CFLAGS += \ + -DCFG_TUSB_MCU=OPT_MCU_STM32N6 \ + -DBOARD_TUD_RHPORT=${RHPORT_DEVICE} \ + -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ + -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ + -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + +# GCC Flags +CFLAGS_GCC += \ + -flto \ + +# suppress warning caused by vendor mcu driver +CFLAGS_GCC += \ + -Wno-error=cast-align \ + -Wno-error=unused-parameter \ + +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs + +# ----------------- +# Sources & Include +# ----------------- + +SRC_C += \ + src/portable/synopsys/dwc2/dcd_dwc2.c \ + src/portable/synopsys/dwc2/hcd_dwc2.c \ + src/portable/synopsys/dwc2/dwc2_common.c \ + $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}_fsbl.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_dma.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_hcd.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_i2c.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pcd.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pcd_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rif.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_ll_usb.c \ + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# Linker +LD_FILE_GCC = $(BOARD_PATH)/STM32N657XX_AXISRAM2_fsbl.ld + +# Startup +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(ST_PREFIX_LONG)_fsbl.s +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s + +# Linker +LD_FILE_GCC ?= $(ST_CMSIS)/Source/Templates/gcc/linker/$(ST_PREFIX_LONG)_flash.ld +LD_FILE_IAR ?= $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf diff --git a/hw/bsp/stm32n6/partition_stm32n657xx.h b/hw/bsp/stm32n6/partition_stm32n657xx.h new file mode 100644 index 000000000..713068609 --- /dev/null +++ b/hw/bsp/stm32n6/partition_stm32n657xx.h @@ -0,0 +1,792 @@ +/** + ****************************************************************************** + * @file partition_stm32n657xx.h + * @author MCD Application Team + * @brief CMSIS STM32N657xx Device Initial Setup for Secure / Non-Secure Zones + * for ARMCM55 based on CMSIS CORE V5.3.1 partition_ARMCM33.h Template. + * + * This file contains: + * - Initialize Security Attribution Unit (SAU) CTRL register + * - Setup behavior of Sleep and Exception Handling + * - Setup behavior of Floating Point Unit + * - Setup Interrupt Target + * + ******************************************************************************/ +/* + * Copyright (c) 2009-2016 ARM Limited. All rights reserved. + * Portions Copyright (c) 2023 STMicroelectronics, all rights reserved + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef PARTITION_STM32N657XX_H +#define PARTITION_STM32N657XX_H + +/* +//-------- <<< Use Configuration Wizard in Context Menu >>> ----------------- +*/ + +/* +// Initialize Security Attribution Unit (SAU) CTRL register +*/ +#define SAU_INIT_CTRL 0 + +/* +// Enable SAU +// Value for SAU->CTRL register bit ENABLE +*/ +#define SAU_INIT_CTRL_ENABLE 0 + +/* +// When SAU is disabled +// <0=> All Memory is Secure +// <1=> All Memory is Non-Secure +// Value for SAU->CTRL register bit ALLNS +// When all Memory is Non-Secure (ALLNS is 1), IDAU can override memory map configuration. +*/ +#define SAU_INIT_CTRL_ALLNS 0 + +/* +// +*/ + +/* +// Initialize Security Attribution Unit (SAU) Address Regions +// SAU configuration specifies regions to be one of: +// - Secure and Non-Secure Callable +// - Non-Secure +// Note: All memory regions not configured by SAU are Secure +*/ +#define SAU_REGIONS_MAX 8 /* Max. number of SAU regions */ + +/* +// Initialize SAU Region 0 +// Setup SAU Region 0 memory attributes +*/ +#define SAU_INIT_REGION0 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START0 0x00000000 /* start address of SAU region 0 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END0 0x00000000 /* end address of SAU region 0 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC0 0 +/* +// +*/ + +/* +// Initialize SAU Region 1 +// Setup SAU Region 1 memory attributes +*/ +#define SAU_INIT_REGION1 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START1 0x00000000 /* start address of SAU region 1 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END1 0x00000000 /* end address of SAU region 1 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC1 0 +/* +// +*/ + +/* +// Initialize SAU Region 2 +// Setup SAU Region 2 memory attributes +*/ +#define SAU_INIT_REGION2 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START2 0x00000000 /* start address of SAU region 2 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END2 0x00000000 /* end address of SAU region 2 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC2 0 +/* +// +*/ + +/* +// Initialize SAU Region 3 +// Setup SAU Region 3 memory attributes +*/ +#define SAU_INIT_REGION3 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START3 0x00000000 /* start address of SAU region 3 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END3 0x00000000 /* end address of SAU region 3 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC3 0 +/* +// +*/ + +/* +// Initialize SAU Region 4 +// Setup SAU Region 4 memory attributes +*/ +#define SAU_INIT_REGION4 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START4 0x00000000 /* start address of SAU region 4 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END4 0x00000000 /* end address of SAU region 4 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC4 0 +/* +// +*/ + +/* +// Initialize SAU Region 5 +// Setup SAU Region 5 memory attributes +*/ +#define SAU_INIT_REGION5 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START5 0x00000000 /* start address of SAU region 5 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END5 0x00000000 /* end address of SAU region 5 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC5 0 +/* +// +*/ + +/* +// Initialize SAU Region 6 +// Setup SAU Region 6 memory attributes +*/ +#define SAU_INIT_REGION6 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START6 0x00000000 /* start address of SAU region 6 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END6 0x00000000 /* end address of SAU region 6 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC6 0 +/* +// +*/ + +/* +// Initialize SAU Region 7 +// Setup SAU Region 7 memory attributes +*/ +#define SAU_INIT_REGION7 0 + +/* +// Start Address <0-0xFFFFFFE0> +*/ +#define SAU_INIT_START7 0x00000000 /* start address of SAU region 7 */ + +/* +// End Address <0x1F-0xFFFFFFFF> +*/ +#define SAU_INIT_END7 0x00000000 /* end address of SAU region 7 */ + +/* +// Region is +// <0=>Non-Secure +// <1=>Secure, Non-Secure Callable +*/ +#define SAU_INIT_NSC7 0 +/* +// +*/ + +/* +// +*/ + +/* +// Setup behaviour of Sleep and Exception Handling +*/ +#define SCB_CSR_AIRCR_INIT 0 + +/* +// Deep Sleep can be enabled by +// <0=>Secure and Non-Secure state +// <1=>Secure state only +// Value for SCB->CSR register bit DEEPSLEEPS +*/ +#define SCB_CSR_DEEPSLEEPS_VAL 0 + +/* +// System reset request accessible from +// <0=> Secure and Non-Secure state +// <1=> Secure state only +// Value for SCB->AIRCR register bit SYSRESETREQS +*/ +#define SCB_AIRCR_SYSRESETREQS_VAL 0 + +/* +// Priority of Non-Secure exceptions is +// <0=> Not altered +// <1=> Lowered to 0x04-0x07 +// Value for SCB->AIRCR register bit PRIS +*/ +#define SCB_AIRCR_PRIS_VAL 0 + +/* +// BusFault, HardFault, and NMI target +// <0=> Secure state +// <1=> Non-Secure state +// Value for SCB->AIRCR register bit BFHFNMINS +*/ +#define SCB_AIRCR_BFHFNMINS_VAL 0 + +/* +// +*/ + +/* +// Setup behaviour of Floating Point Unit +*/ +#define TZ_FPU_NS_USAGE 1 + +/* +// Floating Point Unit usage +// <0=> Secure state only +// <3=> Secure and Non-Secure state +// Value for SCB->NSACR register bits CP10, CP11 +*/ +#define SCB_NSACR_CP10_11_VAL 3 + +/* +// Treat floating-point registers as Secure +// <0=> Disabled +// <1=> Enabled +// Value for FPU->FPCCR register bit TS +*/ +#define FPU_FPCCR_TS_VAL 0 + +/* +// Clear on return (CLRONRET) accessibility +// <0=> Secure and Non-Secure state +// <1=> Secure state only +// Value for FPU->FPCCR register bit CLRONRETS +*/ +#define FPU_FPCCR_CLRONRETS_VAL 0 + +/* +// Clear floating-point caller saved registers on exception return +// <0=> Disabled +// <1=> Enabled +// Value for FPU->FPCCR register bit CLRONRET +*/ +#define FPU_FPCCR_CLRONRET_VAL 1 + +/* +// +*/ + +/* +// Setup Interrupt Target +*/ + +/* +// Initialize ITNS 0 (Interrupts 0..31) +*/ +#define NVIC_INIT_ITNS0 1 + +/* +// Interrupts 0..31 +// PVD_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// DTS_IRQn <0=> Secure state <1=> Non-Secure state +// RCC_IRQn <0=> Secure state <1=> Non-Secure state +// LOCKUP_IRQn <0=> Secure state <1=> Non-Secure state +// CACHE_ECC_IRQn <0=> Secure state <1=> Non-Secure state +// TCM_ECC_IRQn <0=> Secure state <1=> Non-Secure state +// BKP_ECC_IRQn <0=> Secure state <1=> Non-Secure state +// FPU_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// RTC_S_IRQn <0=> Secure state <1=> Non-Secure state +// TAMP_IRQn <0=> Secure state <1=> Non-Secure state +// RIFSC_TAMPER_IRQn <0=> Secure state <1=> Non-Secure state +// IAC_IRQn <0=> Secure state <1=> Non-Secure state +// RCC_S_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// RTC_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// IWDG_IRQn <0=> Secure state <1=> Non-Secure state +// WWDG_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI0_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI1_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI2_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI3_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI4_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI5_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI6_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI7_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI8_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI9_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI10_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI11_IRQn <0=> Secure state <1=> Non-Secure state +*/ +#define NVIC_INIT_ITNS0_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 1 (Interrupts 32..63) +*/ +#define NVIC_INIT_ITNS1 1 + +/* +// Interrupts 32..63 +// EXTI12_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI13_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI14_IRQn <0=> Secure state <1=> Non-Secure state +// EXTI15_IRQn <0=> Secure state <1=> Non-Secure state +// SAES_IRQn <0=> Secure state <1=> Non-Secure state +// CRYP_IRQn <0=> Secure state <1=> Non-Secure state +// PKA_IRQn <0=> Secure state <1=> Non-Secure state +// HASH_IRQn <0=> Secure state <1=> Non-Secure state +// RNG_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// MCE1_IRQn <0=> Secure state <1=> Non-Secure state +// MCE2_IRQn <0=> Secure state <1=> Non-Secure state +// MCE3_IRQn <0=> Secure state <1=> Non-Secure state +// MCE4_IRQn <0=> Secure state <1=> Non-Secure state +// ADC1_2_IRQn <0=> Secure state <1=> Non-Secure state +// CSI_IRQn <0=> Secure state <1=> Non-Secure state +// DCMIPP_IRQn <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// Reserved <0=> Secure state <1=> Non-Secure state +// PAHB_ERR_IRQn <0=> Secure state <1=> Non-Secure state +// NPU0_IRQn <0=> Secure state <1=> Non-Secure state +// NPU1_IRQn <0=> Secure state <1=> Non-Secure state +// NPU2_IRQn <0=> Secure state <1=> Non-Secure state +// NPU3_IRQn <0=> Secure state <1=> Non-Secure state +// CACHEAXI_IRQn <0=> Secure state <1=> Non-Secure state +// LTDC_LO_IRQn <0=> Secure state <1=> Non-Secure state +// LTDC_LO_ERR_IRQn <0=> Secure state <1=> Non-Secure state +// DMA2D_IRQn <0=> Secure state <1=> Non-Secure state +// JPEG_IRQn <0=> Secure state <1=> Non-Secure state +// VENC_IRQn <0=> Secure state <1=> Non-Secure state +// GFXMMU_IRQn <0=> Secure state <1=> Non-Secure state +*/ +#define NVIC_INIT_ITNS1_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 2 (Interrupts 64..95) +*/ +#define NVIC_INIT_ITNS2 1 + +/* +// Interrupts 64..95 +// GFXTIM_IRQn <0=> Secure state <1=> Non-Secure state +// GPU2D_IRQn <0=> Secure state <1=> Non-Secure state +// GPU2D_ER_IRQn <0=> Secure state <1=> Non-Secure state +// ICACHE_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel0_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel1_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel2_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel3_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel4_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel5_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel6_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel7_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel8_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel9_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel10_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel11_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel12_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel13_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel14_IRQn <0=> Secure state <1=> Non-Secure state +// HPDMA1_Channel15_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel0_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel1_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel2_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel3_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel4_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel5_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel6_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel7_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel8_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel9_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel10_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel11_IRQn <0=> Secure state <1=> Non-Secure state +*/ +#define NVIC_INIT_ITNS2_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 3 (Interrupts 96..127) +*/ +#define NVIC_INIT_ITNS3 1 + +/* +// Interrupts 96..127 +// GPDMA1_Channel12_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel13_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel14_IRQn <0=> Secure state <1=> Non-Secure state +// GPDMA1_Channel15_IRQn <0=> Secure state <1=> Non-Secure state +// I2C1_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C1_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I2C2_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C2_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I2C3_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C3_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I2C4_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I2C4_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I3C1_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I3C1_ER_IRQn <0=> Secure state <1=> Non-Secure state +// I3C2_EV_IRQn <0=> Secure state <1=> Non-Secure state +// I3C2_ER_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_BRK_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_UP_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_TRG_COM_IRQn <0=> Secure state <1=> Non-Secure state +// TIM1_CC_IRQn <0=> Secure state <1=> Non-Secure state +// TIM2_IRQn <0=> Secure state <1=> Non-Secure state +// TIM3_IRQn <0=> Secure state <1=> Non-Secure state +// TIM4_IRQn <0=> Secure state <1=> Non-Secure state +// TIM5_IRQn <0=> Secure state <1=> Non-Secure state +// TIM6_IRQn <0=> Secure state <1=> Non-Secure state +// TIM7_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_BRK_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_UP_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_TRG_COM_IRQn <0=> Secure state <1=> Non-Secure state +// TIM8_CC_IRQn <0=> Secure state <1=> Non-Secure state +// TIM9_IRQn <0=> Secure state <1=> Non-Secure state +// TIM10_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS3_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 4 (Interrupts 128..159) +*/ +#define NVIC_INIT_ITNS4 1 + +/* +// Interrupts 128..159 +// TIM11_IRQn <0=> Secure state <1=> Non-Secure state +// TIM12_IRQn <0=> Secure state <1=> Non-Secure state +// TIM13_IRQn <0=> Secure state <1=> Non-Secure state +// TIM14_IRQn <0=> Secure state <1=> Non-Secure state +// TIM15_IRQn <0=> Secure state <1=> Non-Secure state +// TIM16_IRQn <0=> Secure state <1=> Non-Secure state +// TIM17_IRQn <0=> Secure state <1=> Non-Secure state +// TIM18_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM1_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM2_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM3_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM4_IRQn <0=> Secure state <1=> Non-Secure state +// LPTIM5_IRQn <0=> Secure state <1=> Non-Secure state +// ADF1_FLT0_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT0_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT1_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT2_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT3_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT4_IRQn <0=> Secure state <1=> Non-Secure state +// MDF1_FLT5_IRQn <0=> Secure state <1=> Non-Secure state +// SAI1_A_IRQn <0=> Secure state <1=> Non-Secure state +// SAI1_B_IRQn <0=> Secure state <1=> Non-Secure state +// SAI2_A_IRQn <0=> Secure state <1=> Non-Secure state +// SAI2_B_IRQn <0=> Secure state <1=> Non-Secure state +// SPDIFRX1_IRQn <0=> Secure state <1=> Non-Secure state +// SPI1_IRQn <0=> Secure state <1=> Non-Secure state +// SPI2_IRQn <0=> Secure state <1=> Non-Secure state +// SPI3_IRQn <0=> Secure state <1=> Non-Secure state +// SPI4_IRQn <0=> Secure state <1=> Non-Secure state +// SPI5_IRQn <0=> Secure state <1=> Non-Secure state +// SPI6_IRQn <0=> Secure state <1=> Non-Secure state +// USART1_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS4_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 5 (Interrupts 160..191) +*/ +#define NVIC_INIT_ITNS5 1 + +/* +// Interrupts 160..191 +// USART2_IRQn <0=> Secure state <1=> Non-Secure state +// USART3_IRQn <0=> Secure state <1=> Non-Secure state +// UART4_IRQn <0=> Secure state <1=> Non-Secure state +// UART5_IRQn <0=> Secure state <1=> Non-Secure state +// USART6_IRQn <0=> Secure state <1=> Non-Secure state +// UART7_IRQn <0=> Secure state <1=> Non-Secure state +// UART8_IRQn <0=> Secure state <1=> Non-Secure state +// UART9_IRQn <0=> Secure state <1=> Non-Secure state +// USART10_IRQn <0=> Secure state <1=> Non-Secure state +// LPUART1_IRQn <0=> Secure state <1=> Non-Secure state +// XSPI1_IRQn <0=> Secure state <1=> Non-Secure state +// XSPI2_IRQn <0=> Secure state <1=> Non-Secure state +// XSPI3_IRQn <0=> Secure state <1=> Non-Secure state +// FMC_IRQn <0=> Secure state <1=> Non-Secure state +// SDMMC1_IRQn <0=> Secure state <1=> Non-Secure state +// SDMMC2_IRQn <0=> Secure state <1=> Non-Secure state +// UCPD1_IRQn <0=> Secure state <1=> Non-Secure state +// USB1_OTG_HS_IRQn <0=> Secure state <1=> Non-Secure state +// USB2_OTG_HS_IRQn <0=> Secure state <1=> Non-Secure state +// ETH1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN1_IT0_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN1_IT1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN2_IT0_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN2_IT1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN3_IT0_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN3_IT1_IRQn <0=> Secure state <1=> Non-Secure state +// FDCAN_CU_IRQn <0=> Secure state <1=> Non-Secure state +// MDIOS_IRQn <0=> Secure state <1=> Non-Secure state +// DCMI_PSSI_IRQn <0=> Secure state <1=> Non-Secure state +// WAKEUP_PIN_IRQn <0=> Secure state <1=> Non-Secure state +// CTI_INT0_IRQn <0=> Secure state <1=> Non-Secure state +// CTI_INT1_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS5_VAL 0x00000000 + +/* +// +*/ + +/* +// Initialize ITNS 6 (Interrupts 192..223) +*/ +#define NVIC_INIT_ITNS6 1 + +/* +// Interrupts 192..223 +// Reserved <0=> Secure state <1=> Non-Secure state +// LTDC_UP_IRQn <0=> Secure state <1=> Non-Secure state +// LTDC_UP_ERR_IRQn <0=> Secure state <1=> Non-Secure state + +*/ +#define NVIC_INIT_ITNS6_VAL 0x00000000 + +/* +// +*/ + +/* +// +*/ + + + +/* + max 8 SAU regions. + SAU regions are defined in partition.h + */ + +#define SAU_INIT_REGION(n) \ + SAU->RNR = (n & SAU_RNR_REGION_Msk); \ + SAU->RBAR = (SAU_INIT_START##n & SAU_RBAR_BADDR_Msk); \ + SAU->RLAR = (SAU_INIT_END##n & SAU_RLAR_LADDR_Msk) | \ + ((SAU_INIT_NSC##n << SAU_RLAR_NSC_Pos) & SAU_RLAR_NSC_Msk) | 1U + +/** + \brief Setup a SAU Region + \details Writes the region information contained in SAU_Region to the + registers SAU_RNR, SAU_RBAR, and SAU_RLAR + */ +__STATIC_INLINE void TZ_SAU_Setup (void) +{ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + + #if defined (SAU_INIT_REGION0) && (SAU_INIT_REGION0 == 1U) + SAU_INIT_REGION(0); + #endif + + #if defined (SAU_INIT_REGION1) && (SAU_INIT_REGION1 == 1U) + SAU_INIT_REGION(1); + #endif + + #if defined (SAU_INIT_REGION2) && (SAU_INIT_REGION2 == 1U) + SAU_INIT_REGION(2); + #endif + + #if defined (SAU_INIT_REGION3) && (SAU_INIT_REGION3 == 1U) + SAU_INIT_REGION(3); + #endif + + #if defined (SAU_INIT_REGION4) && (SAU_INIT_REGION4 == 1U) + SAU_INIT_REGION(4); + #endif + + #if defined (SAU_INIT_REGION5) && (SAU_INIT_REGION5 == 1U) + SAU_INIT_REGION(5); + #endif + + #if defined (SAU_INIT_REGION6) && (SAU_INIT_REGION6 == 1U) + SAU_INIT_REGION(6); + #endif + + #if defined (SAU_INIT_REGION7) && (SAU_INIT_REGION7 == 1U) + SAU_INIT_REGION(7); + #endif + + /* repeat this for all possible SAU regions */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + + + #if defined (SAU_INIT_CTRL) && (SAU_INIT_CTRL == 1U) + SAU->CTRL = ((SAU_INIT_CTRL_ENABLE << SAU_CTRL_ENABLE_Pos) & SAU_CTRL_ENABLE_Msk) | + ((SAU_INIT_CTRL_ALLNS << SAU_CTRL_ALLNS_Pos) & SAU_CTRL_ALLNS_Msk) ; + #endif + + #if defined (SCB_CSR_AIRCR_INIT) && (SCB_CSR_AIRCR_INIT == 1U) + SCB->SCR = (SCB->SCR & ~(SCB_SCR_SLEEPDEEPS_Msk )) | + ((SCB_CSR_DEEPSLEEPS_VAL << SCB_SCR_SLEEPDEEPS_Pos) & SCB_SCR_SLEEPDEEPS_Msk); + + SCB->AIRCR = (SCB->AIRCR & ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_SYSRESETREQS_Msk | + SCB_AIRCR_BFHFNMINS_Msk | SCB_AIRCR_PRIS_Msk) ) | + ((0x05FAU << SCB_AIRCR_VECTKEY_Pos) & SCB_AIRCR_VECTKEY_Msk) | + ((SCB_AIRCR_SYSRESETREQS_VAL << SCB_AIRCR_SYSRESETREQS_Pos) & SCB_AIRCR_SYSRESETREQS_Msk) | + ((SCB_AIRCR_PRIS_VAL << SCB_AIRCR_PRIS_Pos) & SCB_AIRCR_PRIS_Msk) | + ((SCB_AIRCR_BFHFNMINS_VAL << SCB_AIRCR_BFHFNMINS_Pos) & SCB_AIRCR_BFHFNMINS_Msk); + #endif /* defined (SCB_CSR_AIRCR_INIT) && (SCB_CSR_AIRCR_INIT == 1U) */ + + #if defined (__FPU_USED) && (__FPU_USED == 1U) && \ + defined (TZ_FPU_NS_USAGE) && (TZ_FPU_NS_USAGE == 1U) + + SCB->NSACR = (SCB->NSACR & ~(SCB_NSACR_CP10_Msk | SCB_NSACR_CP11_Msk)) | + ((SCB_NSACR_CP10_11_VAL << SCB_NSACR_CP10_Pos) & (SCB_NSACR_CP10_Msk | SCB_NSACR_CP11_Msk)); + + FPU->FPCCR = (FPU->FPCCR & ~(FPU_FPCCR_TS_Msk | FPU_FPCCR_CLRONRETS_Msk | FPU_FPCCR_CLRONRET_Msk)) | + ((FPU_FPCCR_TS_VAL << FPU_FPCCR_TS_Pos ) & FPU_FPCCR_TS_Msk ) | + ((FPU_FPCCR_CLRONRETS_VAL << FPU_FPCCR_CLRONRETS_Pos) & FPU_FPCCR_CLRONRETS_Msk) | + ((FPU_FPCCR_CLRONRET_VAL << FPU_FPCCR_CLRONRET_Pos ) & FPU_FPCCR_CLRONRET_Msk ); + #endif + + #if defined (NVIC_INIT_ITNS0) && (NVIC_INIT_ITNS0 == 1U) + NVIC->ITNS[0] = NVIC_INIT_ITNS0_VAL; + #endif + + #if defined (NVIC_INIT_ITNS1) && (NVIC_INIT_ITNS1 == 1U) + NVIC->ITNS[1] = NVIC_INIT_ITNS1_VAL; + #endif + + #if defined (NVIC_INIT_ITNS2) && (NVIC_INIT_ITNS2 == 1U) + NVIC->ITNS[2] = NVIC_INIT_ITNS2_VAL; + #endif + + #if defined (NVIC_INIT_ITNS3) && (NVIC_INIT_ITNS3 == 1U) + NVIC->ITNS[3] = NVIC_INIT_ITNS3_VAL; + #endif + + #if defined (NVIC_INIT_ITNS4) && (NVIC_INIT_ITNS4 == 1U) + NVIC->ITNS[4] = NVIC_INIT_ITNS4_VAL; + #endif + + #if defined (NVIC_INIT_ITNS5) && (NVIC_INIT_ITNS5 == 1U) + NVIC->ITNS[5] = NVIC_INIT_ITNS5_VAL; + #endif + + #if defined (NVIC_INIT_ITNS6) && (NVIC_INIT_ITNS6 == 1U) + NVIC->ITNS[6] = NVIC_INIT_ITNS6_VAL; + #endif + +} + +#endif /* PARTITION_STM32N657XX_H */ diff --git a/hw/bsp/stm32n6/stm32n6xx_hal_conf.h b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h new file mode 100644 index 000000000..d98d365a3 --- /dev/null +++ b/hw/bsp/stm32n6/stm32n6xx_hal_conf.h @@ -0,0 +1,504 @@ +/** + ****************************************************************************** + * @file stm32n6xx_hal_conf_template.h + * @author MCD Application Team + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32n6xx_hal_conf.h. + ****************************************************************************** + * @attention + * + * Copyright (c) 2023 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32N6xx_HAL_CONF_H +#define STM32N6xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/*#define HAL_ADC_MODULE_ENABLED */ +/*#define HAL_BSEC_MODULE_ENABLED */ +/*#define HAL_CRC_MODULE_ENABLED */ +/*#define HAL_CRYP_MODULE_ENABLED */ +/*#define HAL_DCMI_MODULE_ENABLED */ +/*#define HAL_DCMIPP_MODULE_ENABLED */ +/*#define HAL_DMA2D_MODULE_ENABLED */ +/*#define HAL_DTS_MODULE_ENABLED */ +/*#define HAL_ETH_MODULE_ENABLED */ +/*#define HAL_EXTI_MODULE_ENABLED */ +/*#define HAL_FDCAN_MODULE_ENABLED */ +/*#define HAL_GFXMMU_MODULE_ENABLED */ +/*#define HAL_GFXTIM_MODULE_ENABLED */ +/*#define HAL_HASH_MODULE_ENABLED */ +#define HAL_HCD_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +/*#define HAL_I2S_MODULE_ENABLED */ +/*#define HAL_I3C_MODULE_ENABLED */ +/*#define HAL_ICACHE_MODULE_ENABLED */ +/*#define HAL_IRDA_MODULE_ENABLED */ +/*#define HAL_IWDG_MODULE_ENABLED */ +/*#define HAL_JPEG_MODULE_ENABLED */ +/*#define HAL_LPTIM_MODULE_ENABLED */ +/*#define HAL_LTDC_MODULE_ENABLED */ +/*#define HAL_MCE_MODULE_ENABLED */ +/*#define HAL_MDF_MODULE_ENABLED */ +/*#define HAL_MMC_MODULE_ENABLED */ +/*#define HAL_NAND_MODULE_ENABLED */ +/*#define HAL_NOR_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/*#define HAL_PKA_MODULE_ENABLED */ +/*#define HAL_PSSI_MODULE_ENABLED */ +/*#define HAL_RAMCFG_MODULE_ENABLED */ +#define HAL_RIF_MODULE_ENABLED +/*#define HAL_RNG_MODULE_ENABLED */ +/*#define HAL_RTC_MODULE_ENABLED */ +/*#define HAL_SAI_MODULE_ENABLED */ +/*#define HAL_SD_MODULE_ENABLED */ +/*#define HAL_SDIO_MODULE_ENABLED */ +/*#define HAL_SDRAM_MODULE_ENABLED */ +/*#define HAL_SMARTCARD_MODULE_ENABLED*/ +/*#define HAL_SMBUS_MODULE_ENABLED */ +/*#define HAL_SPDIFRX_MODULE_ENABLED */ +/*#define HAL_SPI_MODULE_ENABLED */ +/*#define HAL_SRAM_MODULE_ENABLED */ +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +#define HAL_USART_MODULE_ENABLED +/*#define HAL_WWDG_MODULE_ENABLED */ +/*#define HAL_XSPI_MODULE_ENABLED */ +/*#define HAL_CACHEAXI_MODULE_ENABLED */ +/*#define HAL_MDIOS_MODULE_ENABLED */ +/*#define HAL_GPU2D_MODULE_ENABLED */ +/*#define HAL_CACHEAXI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 48000000UL /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT 100UL /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768UL /*!< Value of the External oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000UL /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal Multiple Speed oscillator (MSI) default value. + * This value is the default MSI range value after Reset. + */ +#if !defined (MSI_VALUE) +#define MSI_VALUE 4000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* MSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 64000000UL /*!< Value of the Internal oscillator in Hz */ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000UL /*!< LSI Typical Value in Hz */ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz */ +/* The real value may vary depending on the variations in voltage and temperature.*/ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300UL /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 15U /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Register callback feature configuration ############### */ +/** + * @brief Set below the peripheral configuration to "1U" to add the support + * of HAL callback registration/unregistration feature for the HAL + * driver(s). This allows user application to provide specific callback + * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting + * the default weak callback functions (see each stm32n6xx_hal_ppp.h file + * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef + * for each PPP peripheral). + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CACHEAXI_REGISTER_CALLBACKS 0U /* CACHEAXI register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DCMIPP_REGISTER_CALLBACKS 0U /* DCMIPP register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ +#define USE_HAL_GFXTIM_REGISTER_CALLBACKS 0U /* GFXTIM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_I3C_REGISTER_CALLBACKS 0U /* I3C register callback disabled */ +#define USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MCE_REGISTER_CALLBACKS 0U /* MCE register callback disabled */ +#define USE_HAL_MDF_REGISTER_CALLBACKS 0U /* MDF register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_PKA_REGISTER_CALLBACKS 0U /* PKA register callback disabled */ +#define USE_HAL_PSSI_REGISTER_CALLBACKS 0U /* PSSI register callback disabled */ +#define USE_HAL_RAMCFG_REGISTER_CALLBACKS 0U /* RAMCFG register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SDIO_REGISTER_CALLBACKS 0U /* SDIO register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_XSPI_REGISTER_CALLBACKS 0U /* XSPI register callback disabled */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver + * Activated: CRC code is present inside driver + * Deactivated: CRC code cleaned from driver + */ +#define USE_SPI_CRC 0U + +/* ################## SDMMC peripheral configuration ######################### */ + +#define USE_SD_TRANSCEIVER 0U + +/* ################## SDIO peripheral configuration ########################## */ +#define USE_SDIO_TRANSCEIVER 1U +#define SDIO_MAX_IO_NUMBER 7U /*!< SDIO device support maximum IO number */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32n6xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32n6xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_RIF_MODULE_ENABLED +#include "stm32n6xx_hal_rif.h" +#endif /* HAL_RIF_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32n6xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CACHEAXI_MODULE_ENABLED +#include "stm32n6xx_hal_cacheaxi.h" +#endif /* HAL_CACHEAXI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32n6xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32n6xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_BSEC_MODULE_ENABLED +#include "stm32n6xx_hal_bsec.h" +#endif /* HAL_BSEC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32n6xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32n6xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED +#include "stm32n6xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DCMIPP_MODULE_ENABLED +#include "stm32n6xx_hal_dcmipp.h" +#endif /* HAL_DCMIPP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED +#include "stm32n6xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED +#include "stm32n6xx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED +#include "stm32n6xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32n6xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED +#include "stm32n6xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED +#include "stm32n6xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_GFXTIM_MODULE_ENABLED +#include "stm32n6xx_hal_gfxtim.h" +#endif /* HAL_GFXTIM_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32n6xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_GPU2D_MODULE_ENABLED +#include "stm32n6xx_hal_gpu2d.h" +#endif /* HAL_GPU2D_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED +#include "stm32n6xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED +#include "stm32n6xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32n6xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32n6xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_I3C_MODULE_ENABLED +#include "stm32n6xx_hal_i3c.h" +#endif /* HAL_I3C_MODULE_ENABLED */ + +#ifdef HAL_ICACHE_MODULE_ENABLED +#include "stm32n6xx_hal_icache.h" +#endif /* HAL_ICACHE_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32n6xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32n6xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED +#include "stm32n6xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32n6xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32n6xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_MCE_MODULE_ENABLED +#include "stm32n6xx_hal_mce.h" +#endif /* HAL_MCE_MODULE_ENABLED */ + +#ifdef HAL_MDF_MODULE_ENABLED +#include "stm32n6xx_hal_mdf.h" +#endif /* HAL_MDF_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED +#include "stm32n6xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED +#include "stm32n6xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32n6xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED +#include "stm32n6xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED +#include "stm32n6xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED +#include "stm32n6xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PKA_MODULE_ENABLED +#include "stm32n6xx_hal_pka.h" +#endif /* HAL_PKA_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED +#include "stm32n6xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32n6xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RAMCFG_MODULE_ENABLED +#include "stm32n6xx_hal_ramcfg.h" +#endif /* HAL_RAMCFG_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32n6xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32n6xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED +#include "stm32n6xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED +#include "stm32n6xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDIO_MODULE_ENABLED +#include "stm32n6xx_hal_sdio.h" +#endif /* HAL_SDIO_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED +#include "stm32n6xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32n6xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32n6xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED +#include "stm32n6xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32n6xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED +#include "stm32n6xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32n6xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32n6xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32n6xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32n6xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_XSPI_MODULE_ENABLED +#include "stm32n6xx_hal_xspi.h" +#endif /* HAL_XSPI_MODULE_ENABLED */ + +/* Exported macros -----------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32N6xx_HAL_CONF_H */ diff --git a/hw/bsp/zephyr_board_aliases.cmake b/hw/bsp/zephyr_board_aliases.cmake index 91ffc3a39..b85ecec81 100644 --- a/hw/bsp/zephyr_board_aliases.cmake +++ b/hw/bsp/zephyr_board_aliases.cmake @@ -1 +1,2 @@ set(pca10056_BOARD_ALIAS nrf52840dk/nrf52840) +set(stm32n657nucleo_BOARD_ALIAS nucleo_n657x0_q) \ No newline at end of file diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 6678265b5..027446a85 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -322,6 +322,15 @@ // MCU with on-chip HS Phy #define TUP_RHPORT_HIGHSPEED 1 +#elif TU_CHECK_MCU(OPT_MCU_STM32N6) + #define TUP_USBIP_DWC2 + #define TUP_USBIP_DWC2_STM32 + + #define TUP_DCD_ENDPOINT_MAX 9 + + // MCU with on-chip HS Phy + #define TUP_RHPORT_HIGHSPEED 2 + //--------------------------------------------------------------------+ // Sony //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 865c51894..5f86d6b76 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -425,6 +425,11 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // Clear A override, force B Valid dwc2->gotgctl = (dwc2->gotgctl & ~GOTGCTL_AVALOEN) | GOTGCTL_BVALOEN | GOTGCTL_BVALOVAL; +#if CFG_TUSB_MCU == OPT_MCU_STM32N6 + // No hardware detection of Vbus B-session is available on the STM32N6 + dwc2->stm32_gccfg |= STM32_GCCFG_VBVALOVAL; +#endif + // Enable required interrupts dwc2->gintmsk |= GINTMSK_OTGINT | GINTMSK_USBSUSPM | GINTMSK_USBRST | GINTMSK_ENUMDNEM | GINTMSK_WUIM; diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 25edcf22d..38aa5656a 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -22,6 +22,7 @@ dwc2_reg_value = { 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'ST N6xx HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], } diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index c11c1eb05..0c1f835a9 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -77,6 +77,17 @@ extern "C" { #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 +#elif CFG_TUSB_MCU == OPT_MCU_STM32N6 + #include "stm32n6xx.h" + #define EP_MAX_FS 6 + #define EP_FIFO_SIZE_FS 1280 + + #define EP_MAX_HS 9 + #define EP_FIFO_SIZE_HS 4096 + + #define USB_OTG_HS_PERIPH_BASE USB1_OTG_HS_BASE + #define OTG_HS_IRQn USB1_OTG_HS_IRQn + #elif CFG_TUSB_MCU == OPT_MCU_STM32F7 #include "stm32f7xx.h" #define EP_MAX_FS 6 diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index 2de15068a..257fa2833 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -381,6 +381,10 @@ bool hcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { // force host mode and wait for mode switch dwc2->gusbcfg = (dwc2->gusbcfg & ~GUSBCFG_FDMOD) | GUSBCFG_FHMOD; +#if CFG_TUSB_MCU == OPT_MCU_STM32N6 + // No hardware detection of Vbus B-session is available on the STM32N6 + dwc2->stm32_gccfg &= ~STM32_GCCFG_VBVALOVAL; +#endif while ((dwc2->gintsts & GINTSTS_CMOD) != GINTSTS_CMODE_HOST) {} // configure fixed-allocated fifo scheme diff --git a/src/tusb_option.h b/src/tusb_option.h index 104f669c9..cca6096c6 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -94,6 +94,7 @@ #define OPT_MCU_STM32U0 316 ///< ST U0 #define OPT_MCU_STM32H7RS 317 ///< ST F7RS #define OPT_MCU_STM32C0 318 ///< ST C0 +#define OPT_MCU_STM32N6 319 ///< ST N6 // Sony #define OPT_MCU_CXD56 400 ///< SONY CXD56 diff --git a/tools/get_deps.py b/tools/get_deps.py index 1ce8be6c7..ab9d50585 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -118,6 +118,9 @@ deps_optional = { 'hw/mcu/st/cmsis_device_l5': ['https://github.com/STMicroelectronics/cmsis_device_l5.git', 'd922865fc0326a102c26211c44b8e42f52c1e53d', 'stm32l5'], + 'hw/mcu/st/cmsis_device_n6': ['https://github.com/STMicroelectronics/cmsis-device-n6.git', + 'f818b00f775444e8d19ef6cad822534c345e054f', + 'stm32n6'], 'hw/mcu/st/cmsis_device_u5': ['https://github.com/STMicroelectronics/cmsis_device_u5.git', '5ad9797c54ec3e55eff770fc9b3cd4a1aefc1309', 'stm32u5'], @@ -172,6 +175,9 @@ deps_optional = { 'hw/mcu/st/stm32l5xx_hal_driver': ['https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git', '675c32a75df37f39d50d61f51cb0dcf53f07e1cb', 'stm32l5'], + 'hw/mcu/st/stm32n6xx_hal_driver': ['https://github.com/STMicroelectronics/stm32n6xx-hal-driver.git', + '49f9989d10cf6817d4b07ac01848956b46bd0fd6', + 'stm32n6'], 'hw/mcu/st/stm32u5xx_hal_driver': ['https://github.com/STMicroelectronics/stm32u5xx_hal_driver.git', '4d93097a67928e9377e655ddd14622adc31b9770', 'stm32u5'], @@ -198,7 +204,7 @@ deps_optional = { 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' - 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb ' + 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32n6 stm32u5 stm32wb ' 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg ' 'tm4c '], 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', -- cgit v1.3.1 From 5c4b2c75d214fe9a7189dbcb91783d5b7841aa49 Mon Sep 17 00:00:00 2001 From: James Sandison Date: Wed, 4 Jun 2025 13:21:34 +1000 Subject: docs: update dwc2_info.md --- src/portable/synopsys/dwc2/dwc2_info.md | 116 ++++++++++++++++---------------- 1 file changed, 58 insertions(+), 58 deletions(-) (limited to 'src/portable') diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index dec021f59..230ab6b6f 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | XMC4500 | GD32VF103 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | -| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | ST N6xx HS | XMC4500 | GD32VF103 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:-------------|:------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | hub | n/a | hub | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | -- cgit v1.3.1 From 14124c1735507cdb40252f04a3580f80dd9952e9 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Jun 2025 19:35:20 +0700 Subject: add h7rs to ci matrix --- .github/workflows/ci_set_matrix.py | 2 +- src/portable/synopsys/dwc2/dwc2_info.md | 116 ++++++++++++++++---------------- src/portable/synopsys/dwc2/dwc2_info.py | 3 +- 3 files changed, 60 insertions(+), 61 deletions(-) (limited to 'src/portable') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index bccb07e3e..961e27a8f 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -40,7 +40,7 @@ family_list = { "stm32f4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f7": ["arm-gcc", "arm-clang", "arm-iar"], "stm32g0 stm32g4 stm32h5": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32h7": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32h7 stm32h7rs": ["arm-gcc", "arm-clang", "arm-iar"], "stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32u5 stm32wb": ["arm-gcc", "arm-clang", "arm-iar"], "xmc4000": ["arm-gcc"], diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 76bd251c7..54b3cae7c 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | ST H7S3 HS | XMC4500 | GD32VF103 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:-------------|:------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00005000 | 0x00AEC000 | 0x00001000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54411A | 0x4F54292A | 0x00000000 | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 4.11a | 2.92a | 0.00W | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228FE052 | 0x228F5930 | 0x00000000 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | DMA internal | Slave only | -| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | hub | n/a | hub | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | n/a | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 15 | 13 | 0 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 952 | 634 | 0 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5/H7RS HS | XMC4500 | GD32VF103 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:------------------|:-------------|:------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 6ab4e0641..3d7d16dcc 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -21,8 +21,7 @@ dwc2_reg_value = { 'ST F76x HS': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], - 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], - 'ST H7S3 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'ST U5A5/H7RS HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], } -- cgit v1.3.1 From 7d66a3e7758665138f495b5d9174c1874332ce1a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Jun 2025 21:20:49 +0700 Subject: merge n6 and h7rs (same config) --- src/common/tusb_mcu.h | 11 +---------- src/portable/synopsys/dwc2/dwc2_stm32.h | 4 ++-- 2 files changed, 3 insertions(+), 12 deletions(-) (limited to 'src/portable') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 027446a85..2ee2132bf 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -312,7 +312,7 @@ #define TUP_USBIP_FSDEV_STM32 #define TUP_DCD_ENDPOINT_MAX 8 -#elif TU_CHECK_MCU(OPT_MCU_STM32H7RS) +#elif TU_CHECK_MCU(OPT_MCU_STM32H7RS, OPT_MCU_STM32N6) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 @@ -322,15 +322,6 @@ // MCU with on-chip HS Phy #define TUP_RHPORT_HIGHSPEED 1 -#elif TU_CHECK_MCU(OPT_MCU_STM32N6) - #define TUP_USBIP_DWC2 - #define TUP_USBIP_DWC2_STM32 - - #define TUP_DCD_ENDPOINT_MAX 9 - - // MCU with on-chip HS Phy - #define TUP_RHPORT_HIGHSPEED 2 - //--------------------------------------------------------------------+ // Sony //--------------------------------------------------------------------+ diff --git a/src/portable/synopsys/dwc2/dwc2_stm32.h b/src/portable/synopsys/dwc2/dwc2_stm32.h index 0c1f835a9..dc4251c29 100644 --- a/src/portable/synopsys/dwc2/dwc2_stm32.h +++ b/src/portable/synopsys/dwc2/dwc2_stm32.h @@ -79,8 +79,8 @@ extern "C" { #elif CFG_TUSB_MCU == OPT_MCU_STM32N6 #include "stm32n6xx.h" - #define EP_MAX_FS 6 - #define EP_FIFO_SIZE_FS 1280 + #define EP_MAX_FS 9 + #define EP_FIFO_SIZE_FS 4096 #define EP_MAX_HS 9 #define EP_FIFO_SIZE_HS 4096 -- cgit v1.3.1