From 3442a87d5b52112a8bc4672322d488703e4ee23e Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 17 Apr 2024 20:06:13 +0700 Subject: - clang h743 build and run cdc_msc ok - switch unit test back to gcc, since path to clang conflict on local setup (x86 and arm) --- src/common/tusb_common.h | 1 + src/portable/synopsys/dwc2/dcd_dwc2.c | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'src') diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 1f08ce4ed..0d4082c03 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -65,6 +65,7 @@ // Standard Headers #include #include +#include #include #include #include diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index a824226c7..f17d30f06 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -174,7 +174,7 @@ static bool fifo_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t packet_size) { // Check if free space is available TU_ASSERT(_allocated_fifo_words_tx + fifo_size + dwc2->grxfsiz <= _dwc2_controller[rhport].ep_fifo_size / 4); _allocated_fifo_words_tx += fifo_size; - TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %lu", fifo_size * 4, + TU_LOG(DWC2_DEBUG, " Allocated %u bytes at offset %" PRIu32, fifo_size * 4, _dwc2_controller[rhport].ep_fifo_size - _allocated_fifo_words_tx * 4); // DIEPTXF starts at FIFO #1. @@ -419,9 +419,9 @@ void print_dwc2_info(dwc2_regs_t* dwc2) { volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; TU_LOG(DWC2_DEBUG, "guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); for (size_t i = 0; i < 5; i++) { - TU_LOG(DWC2_DEBUG, "0x%08lX, ", p[i]); + TU_LOG(DWC2_DEBUG, "0x%08" PRIX32 ", ", p[i]); } - TU_LOG(DWC2_DEBUG, "0x%08lX\r\n", p[5]); + TU_LOG(DWC2_DEBUG, "0x%08" PRIX32 "\r\n", p[5]); } #endif -- cgit v1.3.1 From 9d1d171b0c54f179b07c4abd3f776da1e512e2fc Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 19 Apr 2024 23:08:27 +0700 Subject: - update nrfx to v3.4.0 - compile nrf with __STARTUP_CLEAR_BSS and link flag -nostartfiles --- hw/bsp/nrf/boards/pca10056/board.cmake | 1 - hw/bsp/nrf/family.c | 46 +++++++++++++++++++++++++++++++--- hw/bsp/nrf/family.cmake | 13 ++++++---- hw/bsp/nrf/linker/nrf52840_xxaa.ld | 26 +++++++++++++++++++ src/portable/nordic/nrf5x/dcd_nrf5x.c | 3 ++- tools/get_deps.py | 2 +- 6 files changed, 79 insertions(+), 12 deletions(-) create mode 100644 hw/bsp/nrf/linker/nrf52840_xxaa.ld (limited to 'src') diff --git a/hw/bsp/nrf/boards/pca10056/board.cmake b/hw/bsp/nrf/boards/pca10056/board.cmake index 693d7beed..cc370aac8 100644 --- a/hw/bsp/nrf/boards/pca10056/board.cmake +++ b/hw/bsp/nrf/boards/pca10056/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52840) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index 71c651f5f..897d27c59 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -33,6 +33,7 @@ #pragma GCC diagnostic ignored "-Wcast-qual" #pragma GCC diagnostic ignored "-Wcast-align" #pragma GCC diagnostic ignored "-Wunused-parameter" +#pragma GCC diagnostic ignored "-Wunused-variable" #pragma GCC diagnostic ignored "-Wundef" #pragma GCC diagnostic ignored "-Wredundant-decls" #endif @@ -54,6 +55,14 @@ #endif +// There is API changes between nrfx v2 and v3 +#if 85301 >= (10000*MDK_MAJOR_VERSION + 100*MDK_MINOR_VERSION + MDK_MICRO_VERSION) + // note MDK 8.53.1 is also used by nrfx v3.0.0, just skip this version and use later 3.x + #define NRFX_VER 2 +#else + #define NRFX_VER 3 +#endif + //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -100,11 +109,19 @@ static void max3421_init(void); static nrfx_spim_t _spi = NRFX_SPIM_INSTANCE(1); #endif - //--------------------------------------------------------------------+ // //--------------------------------------------------------------------+ +// Implement _start() since we use linker flag '-nostartfiles'. +// Requires defined __STARTUP_CLEAR_BSS, +extern int main(void); +TU_ATTR_UNUSED void _start(void) { + // called by startup code + main(); + while (1) {} +} + void board_init(void) { // stop LF clock just in case we jump from application without reset NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; @@ -124,6 +141,7 @@ void board_init(void) { SysTick_Config(SystemCoreClock / 1000); // UART + #if NRFX_VER == 2 nrfx_uarte_config_t uart_cfg = { .pseltxd = UART_TX_PIN, .pselrxd = UART_RX_PIN, @@ -137,6 +155,21 @@ void board_init(void) { .parity = NRF_UARTE_PARITY_EXCLUDED, } }; + #elif NRFX_VER == 3 + nrfx_uarte_config_t uart_cfg = { + .txd_pin = UART_TX_PIN, + .rxd_pin = UART_RX_PIN, + .rts_pin = NRF_UARTE_PSEL_DISCONNECTED, + .cts_pin = NRF_UARTE_PSEL_DISCONNECTED, + .p_context = NULL, + .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE + .interrupt_priority = 7, + .config = { + .hwfc = NRF_UARTE_HWFC_DISABLED, + .parity = NRF_UARTE_PARITY_EXCLUDED, + } + }; + #endif nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); @@ -224,11 +257,17 @@ int board_uart_read(uint8_t* buf, int len) { (void) buf; (void) len; return 0; -// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; +// nrfx_err_t err = nrfx_uarte_rx(&_uart_id, buf, (size_t) len); +// return NRFX_SUCCESS == err ? len : 0; } int board_uart_write(void const* buf, int len) { - return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; + nrfx_err_t err = nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len + #if NRFX_VER == 3 + ,0 + #endif + ); + return (NRFX_SUCCESS == err) ? len : 0; } #if CFG_TUSB_OS == OPT_OS_NONE @@ -241,7 +280,6 @@ void SysTick_Handler(void) { uint32_t board_millis(void) { return system_ticks; } - #endif #ifdef SOFTDEVICE_PRESENT diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 60dcdf753..c038a2035 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -31,14 +31,13 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${NRFX_DIR}/mdk/${MCU_VARIANT}_xxaa.ld) - set(LD_FILE_Clang ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/clang/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_Clang ${LD_FILE_GNU}) endif () if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - #set(STARTUP_FILE_Clang ${NRFX_DIR}/mdk/arm_startup_${MCU_VARIANT}.s) endif () add_library(${BOARD_TARGET} STATIC @@ -48,9 +47,13 @@ function(add_board_target BOARD_TARGET) ${NRFX_DIR}/drivers/src/nrfx_spim.c ${NRFX_DIR}/drivers/src/nrfx_uarte.c ${NRFX_DIR}/mdk/system_${MCU_VARIANT}.c + ${NRFX_DIR}/soc/nrfx_atomic.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) - target_compile_definitions(${BOARD_TARGET} PUBLIC CONFIG_GPIO_AS_PINRESET) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __STARTUP_CLEAR_BSS + CONFIG_GPIO_AS_PINRESET + ) if (MCU_VARIANT STREQUAL "nrf52840") target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52840_XXAA) @@ -82,12 +85,12 @@ function(add_board_target BOARD_TARGET) "LINKER:--script=${LD_FILE_GNU}" -L${NRFX_DIR}/mdk --specs=nosys.specs --specs=nano.specs + -nostartfiles ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_Clang}" -L${NRFX_DIR}/mdk - -lcrt0 ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/nrf/linker/nrf52840_xxaa.ld b/hw/bsp/nrf/linker/nrf52840_xxaa.ld new file mode 100644 index 000000000..8768fe072 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf52840_xxaa.ld @@ -0,0 +1,26 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x100000 + EXTFLASH (rx) : ORIGIN = 0x12000000, LENGTH = 0x8000000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 + CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x40000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +/*__tbss_start__ = __tbss_start;*/ +/*__tbss_end__ = __tbss_end;*/ +/*__sbss_start__ = __sbss_start;*/ +/*__sbss_end__ = __sbss_end;*/ + +/* picolibc crt0 */ +/*__data_source = __copy_table_start__;*/ +/*__tls_base = __tdata_start;*/ +/*PROVIDE( __tls_align = MAX(ALIGNOF(.tdata), ALIGNOF(.tbss)) );*/ +/*PROVIDE( __arm32_tls_tcb_offset = MAX(8, __tls_align) );*/ diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 38d37bfc6..d31925806 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -58,7 +58,8 @@ /* Try to detect nrfx version if not configured with CFG_TUD_NRF_NRFX_VERSION * nrfx v1 and v2 are concurrently developed. There is no NRFX_VERSION only MDK VERSION which is as follows: - * - v2.6.0: 8.44.1, v2.5.0: 8.40.2, v2.4.0: 8.37.0, v2.3.0: 8.35.0, v2.2.0: 8.32.1, v2.1.0: 8.30.2, v2.0.0: 8.29.0 + * - v3.0.0: 8.53.1 (conflict with v2.11.0), v3.1.0: 8.55.0 ... + * - v2.11.0: 8.53.1, v2.6.0: 8.44.1, v2.5.0: 8.40.2, v2.4.0: 8.37.0, v2.3.0: 8.35.0, v2.2.0: 8.32.1, v2.1.0: 8.30.2, v2.0.0: 8.29.0 * - v1.9.0: 8.40.3, v1.8.6: 8.35.0 (conflict with v2.3.0), v1.8.5: 8.32.3, v1.8.4: 8.32.1 (conflict with v2.2.0), * v1.8.2: 8.32.1 (conflict with v2.2.0), v1.8.1: 8.27.1 * Therefore the check for v1 would be: diff --git a/tools/get_deps.py b/tools/get_deps.py index 85c8c2126..cfa60002a 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -42,7 +42,7 @@ deps_optional = { '0b79559eb411149d36e073c1635c620e576308d4', 'mm32'], 'hw/mcu/nordic/nrfx': ['https://github.com/NordicSemiconductor/nrfx.git', - '2527e3c8449cfd38aee41598e8af8492f410ed15', + '7c47cc0a56ce44658e6da2458e86cd8783ccc4a2', 'nrf'], 'hw/mcu/nuvoton': ['https://github.com/majbthrd/nuc_driver.git', '2204191ec76283371419fbcec207da02e1bc22fa', -- cgit v1.3.1 From 2e383bf90173aa8fa7b4da8a6cded5527907c465 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 12:12:56 +0700 Subject: dcd nrf change atoimc_bool to atomic_flag --- hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake | 1 - hw/bsp/nrf/family.cmake | 4 ++-- hw/bsp/nrf/linker/nrf52840_s140_v6.ld | 2 +- hw/bsp/nrf/linker/nrf52840_xxaa.ld | 8 +------- hw/bsp/samd51/family.c | 5 +++++ src/portable/nordic/nrf5x/dcd_nrf5x.c | 5 ++--- 6 files changed, 11 insertions(+), 14 deletions(-) (limited to 'src') diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake index 726438d05..6ff1a7b59 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.cmake @@ -1,6 +1,5 @@ set(MCU_VARIANT nrf52840) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld) -#set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) # enable max3421 host driver for this board set(MAX3421_HOST 1) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index c038a2035..52a6fc196 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -30,10 +30,10 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + if (NOT DEFINED LD_FILE_GNU) set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) - set(LD_FILE_Clang ${LD_FILE_GNU}) endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) diff --git a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld index e27fa1c91..7cc94a405 100644 --- a/hw/bsp/nrf/linker/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/linker/nrf52840_s140_v6.ld @@ -1,7 +1,7 @@ /* Linker script to configure memory regions. */ SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ MEMORY { diff --git a/hw/bsp/nrf/linker/nrf52840_xxaa.ld b/hw/bsp/nrf/linker/nrf52840_xxaa.ld index 8768fe072..377c248bb 100644 --- a/hw/bsp/nrf/linker/nrf52840_xxaa.ld +++ b/hw/bsp/nrf/linker/nrf52840_xxaa.ld @@ -1,6 +1,7 @@ /* Linker script to configure memory regions. */ SEARCH_DIR(.) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ MEMORY { @@ -10,7 +11,6 @@ MEMORY CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x40000 } - INCLUDE "nrf_common.ld" /* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ @@ -18,9 +18,3 @@ INCLUDE "nrf_common.ld" /*__tbss_end__ = __tbss_end;*/ /*__sbss_start__ = __sbss_start;*/ /*__sbss_end__ = __sbss_end;*/ - -/* picolibc crt0 */ -/*__data_source = __copy_table_start__;*/ -/*__tls_base = __tdata_start;*/ -/*PROVIDE( __tls_align = MAX(ALIGNOF(.tdata), ALIGNOF(.tbss)) );*/ -/*PROVIDE( __arm32_tls_tcb_offset = MAX(8, __tls_align) );*/ diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 170c88191..d56d9f695 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -388,3 +388,8 @@ bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx } #endif + +void HardFault_Handler(void) { + __BKPT(0); + while (1); +} diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index d31925806..56e7f39a0 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -119,7 +119,7 @@ static struct { xfer_td_t xfer[EP_CBI_COUNT + 1][2]; // nRF can only carry one DMA at a time, this is used to guard the access to EasyDMA - atomic_bool dma_running; + atomic_flag dma_running; } _dcd; /*------------------------------------------------------------------*/ @@ -155,7 +155,6 @@ static void edpt_dma_start(volatile uint32_t* reg_startep) { // DMA is complete static void edpt_dma_end(void) { - TU_ASSERT(_dcd.dma_running,); atomic_flag_clear(&_dcd.dma_running); } @@ -618,7 +617,7 @@ void dcd_int_handler(uint8_t rhport) { } if (int_status & USBD_INTEN_USBEVENT_Msk) { - TU_LOG(3, "EVENTCAUSE = 0x%04lX\r\n", NRF_USBD->EVENTCAUSE); + TU_LOG(3, "EVENTCAUSE = 0x%04" PRIX32 "\r\n", NRF_USBD->EVENTCAUSE); enum { EVT_CAUSE_MASK = USBD_EVENTCAUSE_SUSPEND_Msk | USBD_EVENTCAUSE_RESUME_Msk | USBD_EVENTCAUSE_USBWUALLOWED_Msk | -- cgit v1.3.1 From 62331f02070bdb1bec2890885008e9f88b06bdb6 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 15:55:50 +0700 Subject: fix nrfx v3 spim freq when init fix clang build with nrf --- examples/host/cdc_msc_hid/src/msc_app.c | 4 ++-- hw/bsp/nrf/boards/pca10059/pca10059.ld | 8 +++++++- hw/bsp/nrf/boards/pca10095/board.cmake | 1 - hw/bsp/nrf/boards/pca10100/board.cmake | 1 - hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake | 1 - hw/bsp/nrf/family.c | 6 ++++-- hw/bsp/nrf/family.cmake | 18 +++++++++--------- hw/bsp/nrf/linker/nrf52833_xxaa.ld | 20 ++++++++++++++++++++ hw/bsp/nrf/linker/nrf5340_xxaa_application.ld | 21 +++++++++++++++++++++ src/class/cdc/cdc_host.c | 4 ++-- src/host/usbh.c | 2 +- 11 files changed, 66 insertions(+), 20 deletions(-) create mode 100644 hw/bsp/nrf/linker/nrf52833_xxaa.ld create mode 100644 hw/bsp/nrf/linker/nrf5340_xxaa_application.ld (limited to 'src') diff --git a/examples/host/cdc_msc_hid/src/msc_app.c b/examples/host/cdc_msc_hid/src/msc_app.c index e9c9676b8..1d7e18e6e 100644 --- a/examples/host/cdc_msc_hid/src/msc_app.c +++ b/examples/host/cdc_msc_hid/src/msc_app.c @@ -48,8 +48,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/hw/bsp/nrf/boards/pca10059/pca10059.ld b/hw/bsp/nrf/boards/pca10059/pca10059.ld index 510bfdd8c..adc80f3c4 100644 --- a/hw/bsp/nrf/boards/pca10059/pca10059.ld +++ b/hw/bsp/nrf/boards/pca10059/pca10059.ld @@ -1,7 +1,7 @@ /* Linker script to configure memory regions. */ SEARCH_DIR(.) -GROUP(-lgcc -lc -lnosys) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ MEMORY { @@ -11,3 +11,9 @@ MEMORY INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/boards/pca10095/board.cmake b/hw/bsp/nrf/boards/pca10095/board.cmake index ca5399a3a..95dd30969 100644 --- a/hw/bsp/nrf/boards/pca10095/board.cmake +++ b/hw/bsp/nrf/boards/pca10095/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf5340_application) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf5340_xxaa_application.ld) function(update_board TARGET) target_sources(${TARGET} PRIVATE diff --git a/hw/bsp/nrf/boards/pca10100/board.cmake b/hw/bsp/nrf/boards/pca10100/board.cmake index c30026815..a925dae80 100644 --- a/hw/bsp/nrf/boards/pca10100/board.cmake +++ b/hw/bsp/nrf/boards/pca10100/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52833) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52833_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake index 693d7beed..cc370aac8 100644 --- a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.cmake @@ -1,5 +1,4 @@ set(MCU_VARIANT nrf52840) -set(LD_FILE_GNU ${NRFX_DIR}/mdk/nrf52840_xxaa.ld) function(update_board TARGET) endfunction() diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index deae64f05..aff851ddc 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -356,20 +356,22 @@ static void max3421_init(void) { .miso_pin = MAX3421_MISO_PIN, #if NRFX_VER <= 2 .ss_pin = NRFX_SPIM_PIN_NOT_USED, + .frequency = NRF_SPIM_FREQ_4M, #else .ss_pin = NRF_SPIM_PIN_NOT_CONNECTED, + .frequency = 4000000u, #endif .ss_active_high = false, .irq_priority = 3, .orc = 0xFF, // default setting 4 Mhz, Mode 0, MSB first - .frequency = NRF_SPIM_FREQ_4M, .mode = NRF_SPIM_MODE_0, .bit_order = NRF_SPIM_BIT_ORDER_MSB_FIRST, + .miso_pull = NRF_GPIO_PIN_NOPULL, }; // no handler --> blocking - nrfx_spim_init(&_spi, &cfg, NULL, NULL); + TU_ASSERT(NRFX_SUCCESS == nrfx_spim_init(&_spi, &cfg, NULL, NULL), ); // max3421e interrupt pin #if NRFX_VER <= 2 diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 52a6fc196..56ff62bc4 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -30,8 +30,14 @@ set(FAMILY_MCUS NRF5X CACHE INTERNAL "") # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) + if (MCU_VARIANT STREQUAL "nrf5340_application") + set(MCU_VARIANT_XXAA "nrf5340_xxaa_application") + else () + set(MCU_VARIANT_XXAA "${MCU_VARIANT}_xxaa") + endif () + if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT}_xxaa.ld) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) endif () set(LD_FILE_Clang ${LD_FILE_GNU}) @@ -50,19 +56,13 @@ function(add_board_target BOARD_TARGET) ${NRFX_DIR}/soc/nrfx_atomic.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) + string(TOUPPER "${MCU_VARIANT_XXAA}" MCU_VARIANT_XXAA_UPPER) target_compile_definitions(${BOARD_TARGET} PUBLIC __STARTUP_CLEAR_BSS CONFIG_GPIO_AS_PINRESET + ${MCU_VARIANT_XXAA_UPPER} ) - if (MCU_VARIANT STREQUAL "nrf52840") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52840_XXAA) - elseif (MCU_VARIANT STREQUAL "nrf52833") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF52833_XXAA) - elseif (MCU_VARIANT STREQUAL "nrf5340_application") - target_compile_definitions(${BOARD_TARGET} PUBLIC NRF5340_XXAA NRF5340_XXAA_APPLICATION) - endif () - if (TRACE_ETM STREQUAL "1") # ENABLE_TRACE will cause system_nrf5x.c to set up ETM trace target_compile_definitions(${BOARD_TARGET} PUBLIC ENABLE_TRACE) diff --git a/hw/bsp/nrf/linker/nrf52833_xxaa.ld b/hw/bsp/nrf/linker/nrf52833_xxaa.ld new file mode 100644 index 000000000..ae4d0e5b3 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf52833_xxaa.ld @@ -0,0 +1,20 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc -lnosys) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x80000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x20000 + CODE_RAM (rwx) : ORIGIN = 0x800000, LENGTH = 0x20000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld new file mode 100644 index 000000000..31762d0b2 --- /dev/null +++ b/hw/bsp/nrf/linker/nrf5340_xxaa_application.ld @@ -0,0 +1,21 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +/*GROUP(-lgcc -lc) not compatible with clang*/ + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x100000 + EXTFLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x8000000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 + RAM1 (rwx) : ORIGIN = 0x20040000, LENGTH = 0x3F000 +} + + +INCLUDE "nrf_common.ld" + +/* nrfx v2 linker does not define __tbss_start/end__ __sbss_start/end__*/ +__tbss_start__ = __tbss_start; +__tbss_end__ = __tbss_end; +__sbss_start__ = __sbss_start; +__sbss_end__ = __sbss_end; diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 5bdd41f1f..133a10f6e 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -1079,7 +1079,7 @@ static uint32_t ftdi_232bm_baud_to_divisor(uint32_t baud) { static bool ftdi_sio_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { uint16_t const divisor = (uint16_t) ftdi_232bm_baud_to_divisor(baudrate); - TU_LOG_DRV("CDC FTDI Set BaudRate = %lu, divisor = 0x%04x\r\n", baudrate, divisor); + TU_LOG_DRV("CDC FTDI Set BaudRate = %" PRIu32 ", divisor = 0x%04x\r\n", baudrate, divisor); p_cdc->user_control_cb = complete_cb; p_cdc->requested_line_coding.bit_rate = baudrate; @@ -1222,7 +1222,7 @@ static bool cp210x_set_line_coding(cdch_interface_t* p_cdc, cdc_line_coding_t co } static bool cp210x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_LOG_DRV("CDC CP210x Set BaudRate = %lu\r\n", baudrate); + TU_LOG_DRV("CDC CP210x Set BaudRate = %" PRIu32 "\r\n", baudrate); uint32_t baud_le = tu_htole32(baudrate); p_cdc->user_control_cb = complete_cb; return cp210x_set_request(p_cdc, CP210X_SET_BAUDRATE, 0, (uint8_t *) &baud_le, 4, diff --git a/src/host/usbh.c b/src/host/usbh.c index f8fddf394..7a47f5056 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -704,7 +704,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t tusb_control_request_t const * request = &_ctrl_xfer.request; if (XFER_RESULT_SUCCESS != result) { - TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); + TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %" PRIu32 "\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); TU_LOG_BUF_USBH(request, 8); // terminate transfer if any stage failed -- cgit v1.3.1 From c097c85dcf8e0ef3ea052c146c5f514101827251 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 16:17:22 +0700 Subject: fix print lu format warnings with clang --- examples/device/audio_test_multi_rate/src/main.c | 2 +- examples/device/cdc_uac2/src/uac2_app.c | 4 ++-- examples/device/uac2_headset/src/main.c | 4 ++-- examples/host/bare_api/src/main.c | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 4 ++-- examples/host/cdc_msc_hid_freertos/src/msc_app.c | 4 ++-- examples/host/msc_file_explorer/src/msc_app.c | 6 +++--- src/CMakeLists.txt | 2 +- src/class/cdc/cdc_device.c | 13 ++++++------- src/class/usbtmc/usbtmc_device.c | 2 +- src/portable/nordic/nrf5x/dcd_nrf5x.c | 2 +- tools/get_deps.py | 3 ++- 12 files changed, 24 insertions(+), 24 deletions(-) (limited to 'src') diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 3e7f40dac..2ff7f10bd 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -272,7 +272,7 @@ bool tud_audio_set_req_entity_cb(uint8_t rhport, tusb_control_request_t const * sampFreq = (uint32_t)((audio_control_cur_4_t *)pBuff)->bCur; - TU_LOG2("Clock set current freq: %lu\r\n", sampFreq); + TU_LOG2("Clock set current freq: %" PRIu32 "\r\n", sampFreq); return true; break; diff --git a/examples/device/cdc_uac2/src/uac2_app.c b/examples/device/cdc_uac2/src/uac2_app.c index 98659ea68..c57d98a1a 100644 --- a/examples/device/cdc_uac2/src/uac2_app.c +++ b/examples/device/cdc_uac2/src/uac2_app.c @@ -69,7 +69,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -118,7 +118,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index fbd7ffe22..0ea6e7025 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -157,7 +157,7 @@ static bool tud_audio_clock_get_request(uint8_t rhport, audio_control_request_t { if (request->bRequest == AUDIO_CS_REQ_CUR) { - TU_LOG1("Clock get current freq %lu\r\n", current_sample_rate); + TU_LOG1("Clock get current freq %" PRIu32 "\r\n", current_sample_rate); audio_control_cur_4_t curf = { (int32_t) tu_htole32(current_sample_rate) }; return tud_audio_buffer_and_schedule_control_xfer(rhport, (tusb_control_request_t const *)request, &curf, sizeof(curf)); @@ -206,7 +206,7 @@ static bool tud_audio_clock_set_request(uint8_t rhport, audio_control_request_t current_sample_rate = (uint32_t) ((audio_control_cur_4_t const *)buf)->bCur; - TU_LOG1("Clock set current freq: %ld\r\n", current_sample_rate); + TU_LOG1("Clock set current freq: %" PRIu32 "\r\n", current_sample_rate); return true; } diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index 14725996d..940840a30 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -420,5 +420,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - printf((char*)temp_buf); + printf("%s", (char*)temp_buf); } diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index 6ff513be1..7d246af67 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -117,7 +117,7 @@ void tuh_cdc_rx_cb(uint8_t idx) { uint32_t count = tuh_cdc_read(idx, buf, bufsize); buf[count] = 0; - printf((char *) buf); + printf("%s", (char *) buf); } void tuh_cdc_mount_cb(uint8_t idx) { @@ -131,7 +131,7 @@ void tuh_cdc_mount_cb(uint8_t idx) { // otherwise you need to call tuh_cdc_set_line_coding() first cdc_line_coding_t line_coding = { 0 }; if (tuh_cdc_get_local_line_coding(idx, &line_coding)) { - printf(" Baudrate: %lu, Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); + printf(" Baudrate: %" PRIu32 ", Stop Bits : %u\r\n", line_coding.bit_rate, line_coding.stop_bits); printf(" Parity : %u, Data Width: %u\r\n", line_coding.parity, line_coding.data_bits); } #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/msc_app.c b/examples/host/cdc_msc_hid_freertos/src/msc_app.c index ee02ba917..9ffd5d965 100644 --- a/examples/host/cdc_msc_hid_freertos/src/msc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/msc_app.c @@ -47,8 +47,8 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const *cb_dat uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024 * 1024) / block_size)); - printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024 * 1024) / block_size)); + printf("Block Count = %" PRIu32 ", Block Size: %" PRIu32 "\r\n", block_count, block_size); return true; } diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index ecea614a2..f323e30f0 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -114,7 +114,7 @@ bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_da uint32_t const block_count = tuh_msc_get_block_count(dev_addr, cbw->lun); uint32_t const block_size = tuh_msc_get_block_size(dev_addr, cbw->lun); - printf("Disk Size: %lu MB\r\n", block_count / ((1024*1024)/block_size)); + printf("Disk Size: %" PRIu32 " MB\r\n", block_count / ((1024*1024)/block_size)); // printf("Block Count = %lu, Block Size: %lu\r\n", block_count, block_size); // For simplicity: we only mount 1 LUN per device @@ -541,10 +541,10 @@ void cli_cmd_ls(EmbeddedCli *cli, char *args, void *context) printf("%-40s", fno.fname); if (fno.fsize < 1024) { - printf("%lu B\r\n", fno.fsize); + printf("%" PRIu32 " B\r\n", fno.fsize); }else { - printf("%lu KB\r\n", fno.fsize / 1024); + printf("%" PRIu32 " KB\r\n", fno.fsize / 1024); } } } diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 076e1e1eb..272962332 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -41,7 +41,7 @@ function(add_tinyusb TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../lib/networking ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") target_compile_options(${TARGET} PRIVATE -Wall -Wextra diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 7ef0530ec..2e0a0c30d 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -43,10 +43,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ - BULK_PACKET_SIZE = (TUD_OPT_HIGH_SPEED ? 512 : 64) -}; +#define BULK_PACKET_SIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) typedef struct { @@ -176,9 +173,11 @@ uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); // flush if queue more than packet size - // may need to suppress -Wunreachable-code since most of the time CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE - if ( (tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE) || ((CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE) && tu_fifo_full(&p_cdc->tx_ff)) ) - { + if ( tu_fifo_count(&p_cdc->tx_ff) >= BULK_PACKET_SIZE + #if CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE + || tu_fifo_full(&p_cdc->tx_ff) // check full if fifo size is less than packet size + #endif + ) { tud_cdc_n_write_flush(itf); } diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 286cbe108..f6cddfbd7 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -360,7 +360,7 @@ uint16_t usbtmcd_open_cb(uint8_t rhport, tusb_desc_interface_t const * itf_desc, // processing a command (such as a clear). Returns true if it was // in the NAK state and successfully transitioned to the ACK wait // state. -bool tud_usbtmc_start_bus_read() +bool tud_usbtmc_start_bus_read(void) { usbtmcd_state_enum oldState = usbtmc_state.state; switch(oldState) diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 56e7f39a0..2fe721d6b 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -147,7 +147,7 @@ static void start_dma(volatile uint32_t* reg_startep) { static void edpt_dma_start(volatile uint32_t* reg_startep) { if (atomic_flag_test_and_set(&_dcd.dma_running)) { - usbd_defer_func((osal_task_func_t) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); + usbd_defer_func((osal_task_func_t)(uintptr_t ) edpt_dma_start, (void*) (uintptr_t) reg_startep, true); } else { start_dma(reg_startep); } diff --git a/tools/get_deps.py b/tools/get_deps.py index cfa60002a..e08246178 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -177,7 +177,8 @@ deps_optional = { '20285262657d1b482d132d20d755c8c330d55c1f', 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf ra saml2x' 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5' - 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb'], + 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb' + 'sam3x samd11 samd21 samd51 same5x same7x saml2x samg'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From db30eee0fcacda2b2f3f208ddf5ab9be723129d8 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 22 Apr 2024 18:08:41 +0700 Subject: clang tested with mcb1800, add heap to lpc18 linker --- examples/host/msc_file_explorer/src/main.c | 17 +++++------- examples/host/msc_file_explorer/src/msc_app.c | 1 - hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 34 ++++++++++++++++------- hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 37 ++++++++++++++++++-------- hw/bsp/lpc18/family.cmake | 8 +++--- hw/bsp/nrf/family.cmake | 3 +-- src/portable/ehci/ehci.c | 2 +- 7 files changed, 64 insertions(+), 38 deletions(-) (limited to 'src') diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 73f3e9eb5..f6b6810f5 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -72,8 +72,7 @@ extern bool msc_app_init(void); extern void msc_app_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); printf("TinyUSB Host MassStorage Explorer Example\r\n"); @@ -87,8 +86,7 @@ int main(void) msc_app_init(); - while (1) - { + while (1) { // tinyusb host task tuh_task(); @@ -103,28 +101,25 @@ int main(void) // TinyUSB Callbacks //--------------------------------------------------------------------+ -void tuh_mount_cb(uint8_t dev_addr) -{ +void tuh_mount_cb(uint8_t dev_addr) { (void) dev_addr; } -void tuh_umount_cb(uint8_t dev_addr) -{ +void tuh_umount_cb(uint8_t dev_addr) { (void) dev_addr; } //--------------------------------------------------------------------+ // Blinking Task //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { const uint32_t interval_ms = 1000; static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < interval_ms) return; // not enough time + if (board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; board_led_write(led_state); diff --git a/examples/host/msc_file_explorer/src/msc_app.c b/examples/host/msc_file_explorer/src/msc_app.c index f323e30f0..ddd39c674 100644 --- a/examples/host/msc_file_explorer/src/msc_app.c +++ b/examples/host/msc_file_explorer/src/msc_app.c @@ -95,7 +95,6 @@ void msc_app_task(void) // //--------------------------------------------------------------------+ - bool inquiry_complete_cb(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) { msc_cbw_t const* cbw = cb_data->cbw; diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld index f1a3add8f..8562a6e71 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -311,6 +311,20 @@ SECTIONS PROVIDE(end = .); } > RamLoc40 AT> RamLoc40 /* > RamLoc32 AT> RamLoc32 */ + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamLoc40 */ .noinit_RAM2 (NOLOAD) : ALIGN(4) { @@ -383,15 +397,17 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 837dec364..02ea1088e 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -255,7 +255,6 @@ SECTIONS *(COMMON) . = ALIGN(4) ; _ebss = .; - PROVIDE(end = .); } > RamLoc40 /* RamLoc32 */ /* NOINIT section for RamLoc40 */ @@ -266,6 +265,20 @@ SECTIONS . = ALIGN(4) ; } > RamLoc40 + .heap (NOLOAD): { + __heap_start = .; + __HeapBase = .; + __heap_base = .; + __end = .; + PROVIDE(end = .); + PROVIDE(_end = .); + PROVIDE(__end__ = .); + KEEP(*(.heap*)) + __HeapLimit = .; + __heap_limit = .; + __heap_end = .; + } > RamLoc40 + /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) { @@ -298,19 +311,21 @@ SECTIONS . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); + /* This cause issue with clang linker, so it is disabled */ + /* MemManage_Handler, BusFault_Handler, UsageFault_Handler may not be defined */ +/* PROVIDE(__valid_user_code_checksum = 0 -*/ +/* (_vStackTop*/ +/* + (ResetISR + 1)*/ +/* + (NMI_Handler + 1)*/ +/* + (HardFault_Handler + 1)*/ +/* + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)*/ +/* + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)*/ +/* + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1)*/ +/* ) );*/ /* Provide basic symbols giving location and size of main text * block, including initial values of RW data sections. Note that diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 78f4c510b..bf8efabba 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -47,9 +47,11 @@ function(add_board_target BOARD_TARGET) if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 56ff62bc4..1d6702720 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -39,7 +39,6 @@ function(add_board_target BOARD_TARGET) if (NOT DEFINED LD_FILE_GNU) set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_XXAA}.ld) endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) set(STARTUP_FILE_GNU ${NRFX_DIR}/mdk/gcc_startup_${MCU_VARIANT}.S) @@ -89,7 +88,7 @@ function(add_board_target BOARD_TARGET) ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" + "LINKER:--script=${LD_FILE_GNU}" -L${NRFX_DIR}/mdk ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index e145cbb1b..01bbf62bf 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -92,7 +92,7 @@ CFG_TUH_MEM_SECTION TU_ATTR_ALIGNED(4096) static ehci_data_t ehci_data; //--------------------------------------------------------------------+ // Debug //--------------------------------------------------------------------+ -#if CFG_TUSB_DEBUG >= (EHCI_DBG + 1) +#if 0 && CFG_TUSB_DEBUG >= (EHCI_DBG + 1) static inline void print_portsc(ehci_registers_t* regs) { TU_LOG_HEX(EHCI_DBG, regs->portsc); TU_LOG(EHCI_DBG, " Connect Status : %u\r\n", regs->portsc_bm.current_connect_status); -- cgit v1.3.1 From 3fd82cfe225cb05c106eccac830bbcf19206bdb1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 10:57:45 +0700 Subject: clang work with lpc55 --- examples/device/msc_dual_lun/src/main.c | 25 ++++------ hw/bsp/family_support.cmake | 2 +- hw/bsp/lpc55/family.c | 66 +++++++++++++++----------- hw/bsp/lpc55/family.cmake | 69 +++++++++++++--------------- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 2 +- 5 files changed, 83 insertions(+), 81 deletions(-) (limited to 'src') diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index de402d3da..aabd0bf8a 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -39,7 +39,7 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, BLINK_MOUNTED = 1000, BLINK_SUSPENDED = 2500, @@ -50,8 +50,7 @@ static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; void led_blinking_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port @@ -61,8 +60,7 @@ int main(void) board_init_after_tusb(); } - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); } @@ -73,42 +71,37 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ +void tud_suspend_cb(bool remote_wakeup_en) { (void) remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ +void led_blinking_task(void) { static uint32_t start_ms = 0; static bool led_state = false; // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (board_millis() - start_ms < blink_interval_ms) return; // not enough time start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d86ecc0a2..5f0653646 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -239,7 +239,7 @@ function(family_configure_common TARGET RTOS) if (NOT TARGET segger_rtt) add_library(segger_rtt STATIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c) target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT) - #target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) +# target_compile_definitions(segger_rtt PUBLIC SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL) endif() target_link_libraries(${TARGET} PUBLIC segger_rtt) endif () diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 0fd85988a..cfd5b7032 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -72,13 +72,11 @@ //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ +void USB0_IRQHandler(void) { tud_int_handler(0); } -void USB1_IRQHandler(void) -{ +void USB1_IRQHandler(void) { tud_int_handler(1); } @@ -92,8 +90,7 @@ settings: sources: - {id: SYSCON.fro_hf.outFreq, value: 96 MHz} ******************************************************************/ -void BootClockFROHF96M(void) -{ +void BootClockFROHF96M(void) { /*!< Set up the clock sources */ /*!< Set up FRO */ POWER_DisablePD(kPDRUNCFG_PD_FRO192M); /*!< Ensure FRO is on */ @@ -116,8 +113,7 @@ void BootClockFROHF96M(void) SystemCoreClock = 96000000U; } -void board_init(void) -{ +void board_init(void) { // Enable IOCON clock CLOCK_EnableClock(kCLOCK_Iocon); @@ -138,7 +134,7 @@ void board_init(void) // LED IOCON_PinMuxSet(IOCON, LED_PORT, LED_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const led_config = { kGPIO_DigitalOutput, 1}; + gpio_pin_config_t const led_config = {kGPIO_DigitalOutput, 1}; GPIO_PinInit(GPIO, LED_PORT, LED_PIN, &led_config); board_led_write(0); @@ -157,7 +153,7 @@ void board_init(void) // Button IOCON_PinMuxSet(IOCON, BUTTON_PORT, BUTTON_PIN, IOCON_PIO_DIG_FUNC0_EN); - gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0}; + gpio_pin_config_t const button_config = {kGPIO_DigitalInput, 0}; GPIO_PinInit(GPIO, BUTTON_PORT, BUTTON_PIN, &button_config); #ifdef UART_DEV @@ -170,8 +166,8 @@ void board_init(void) usart_config_t uart_config; USART_GetDefaultConfig(&uart_config); uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; + uart_config.enableTx = true; + uart_config.enableRx = true; USART_Init(UART_DEV, &uart_config, 12000000); #endif @@ -250,9 +246,8 @@ void board_init(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +void board_led_write(bool state) { + GPIO_PinWrite(GPIO, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); #ifdef NEOPIXEL_PIN if (state) { @@ -266,33 +261,50 @@ void board_led_write(bool state) #endif } -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { // active low return BUTTON_STATE_ACTIVE == GPIO_PinRead(GPIO, BUTTON_PORT, BUTTON_PIN); } -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; return 0; } -int board_uart_write(void const * buf, int len) -{ - USART_WriteBlocking(UART_DEV, (uint8_t const *) buf, len); +int board_uart_write(void const* buf, int len) { + USART_WriteBlocking(UART_DEV, (uint8_t const*) buf, len); return len; } #if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ + +void SysTick_Handler(void) { system_ticks++; } -uint32_t board_millis(void) -{ +uint32_t board_millis(void) { return system_ticks; } #endif + + +#ifndef __ICCARM__ +// Implement _start() since we use linker flag '-nostartfiles'. +// Requires defined __STARTUP_CLEAR_BSS, +extern int main(void); + +TU_ATTR_UNUSED void _start(void) { + // called by startup code + main(); + while (1) {} +} + +#ifdef __clang__ +void _exit (int __status) { + while (1) {} +} +#endif + +#endif diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 75dabfe5a..21c57fc1f 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -1,9 +1,5 @@ include_guard() -if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") -endif () - set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) @@ -30,9 +26,20 @@ set(HOST_PORT $) function(add_board_target BOARD_TARGET) if (TARGET ${BOARD_TARGET}) return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/common/fsl_common_arm.c @@ -44,12 +51,27 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c ) - + target_include_directories(${BOARD_TARGET} PUBLIC + ${TOP}/lib/sct_neopixel + # driver + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/lpc_iocon + ${SDK_DIR}/drivers/lpc_gpio + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/sctimer + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${CMSIS_DIR}/CMSIS/Core/Include + ) target_compile_definitions(${BOARD_TARGET} PUBLIC CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) BOARD_TUD_RHPORT=${PORT} BOARD_TUH_RHPORT=${HOST_PORT} + __STARTUP_CLEAR_BSS ) + # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM if (PORT EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC @@ -65,42 +87,17 @@ function(add_board_target BOARD_TARGET) ) endif () - target_include_directories(${BOARD_TARGET} PUBLIC - ${TOP}/lib/sct_neopixel - # driver - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/flexcomm - ${SDK_DIR}/drivers/lpc_iocon - ${SDK_DIR}/drivers/lpc_gpio - ${SDK_DIR}/drivers/lpuart - ${SDK_DIR}/drivers/sctimer - # mcu - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - ) - update_board(${BOARD_TARGET}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () - - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) - endif () - - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") target_link_options(${BOARD_TARGET} PUBLIC - # linker file "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index f4ed09d83..022904a3a 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -239,7 +239,7 @@ TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(ep_cmd_sts_t* ep_cs, bool is_ return is_highspeed ? (ep_cs[0].cmd_sts.type && !ep_cs[0].cmd_sts.rf_tv) : ep_cs->cmd_sts.type; } -TU_ATTR_ALWAYS_INLINE static inline bool ep_is_bulk(ep_cmd_sts_t* ep_cs) { +TU_ATTR_ALWAYS_INLINE TU_ATTR_UNUSED static inline bool ep_is_bulk(ep_cmd_sts_t* ep_cs) { return (ep_cs[0].cmd_sts.type == 0) && (ep_cs[0].cmd_sts.rf_tv == 0); } -- cgit v1.3.1 From 0f3d6c61b563f8776d6e9f90a8b459a513f79fc1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 12:04:08 +0700 Subject: port clang stm32: f1, f2, f3 --- .github/workflows/build_arm.yml | 1 - .github/workflows/cmake_arm.yml | 4 + hw/bsp/stm32f1/family.cmake | 26 +- hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake | 10 + hw/bsp/stm32f2/boards/stm32f207nucleo/board.h | 57 ++++ .../boards/stm32f207nucleo/stm32f207nucleo.c | 214 ------------ hw/bsp/stm32f2/family.c | 150 +++++++++ hw/bsp/stm32f2/family.cmake | 112 +++++++ hw/bsp/stm32f3/boards/stm32f303disco/board.cmake | 10 + hw/bsp/stm32f3/boards/stm32f303disco/board.h | 61 ++++ .../stm32f3/boards/stm32f303disco/stm32f303disco.c | 216 ------------- .../boards/stm32f303disco/stm32f3xx_hal_conf.h | 357 --------------------- hw/bsp/stm32f3/family.c | 152 +++++++++ hw/bsp/stm32f3/family.cmake | 110 +++++++ hw/bsp/stm32f3/stm32f3xx_hal_conf.h | 357 +++++++++++++++++++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 8 +- 16 files changed, 1043 insertions(+), 802 deletions(-) create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/board.h delete mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c create mode 100644 hw/bsp/stm32f2/family.c create mode 100644 hw/bsp/stm32f2/family.cmake create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/board.cmake create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/board.h delete mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c delete mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h create mode 100644 hw/bsp/stm32f3/family.c create mode 100644 hw/bsp/stm32f3/family.cmake create mode 100644 hw/bsp/stm32f3/stm32f3xx_hal_conf.h (limited to 'src') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 9f3270c91..12e6615ea 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -41,7 +41,6 @@ jobs: - 'lpc51' - 'mm32 msp432e4' - 'samd11 same5x saml2x' - - 'stm32f2 stm32f3' - 'stm32l0 stm32wb' - 'tm4c123 xmc4000' steps: diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index bc2a98b59..8eb1e3f74 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -49,6 +49,8 @@ jobs: - 'samd51' - 'stm32f0' - 'stm32f1' + - 'stm32f2' + - 'stm32f3' - 'stm32f4' - 'stm32f7' - 'stm32g0' @@ -135,6 +137,8 @@ jobs: - 'samd51' - 'stm32f0' - 'stm32f1' + - 'stm32f2' + - 'stm32f3' - 'stm32f4' - 'stm32f7' - 'stm32g0' diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 6657c85ce..cf7e8e9b1 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -1,9 +1,5 @@ include_guard() -if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") -endif () - set(ST_FAMILY f1) set(ST_PREFIX stm32${ST_FAMILY}xx) @@ -29,8 +25,14 @@ function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) # Startup & Linker script set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -47,10 +49,8 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - target_compile_options(${BOARD_TARGET} PUBLIC - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) @@ -58,9 +58,11 @@ function(add_board_target BOARD_TARGET) target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC @@ -106,5 +108,5 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_stlink(${TARGET}) - #family_flash_jlink(${TARGET}) + family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake new file mode 100644 index 000000000..8f78e6295 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f207xx) +set(JLINK_DEVICE stm32f207zg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F207ZGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F207xx + ) +endfunction() diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h new file mode 100644 index 000000000..3301ede27 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h @@ -0,0 +1,57 @@ +#ifndef BOARD_H +#define BOARD_H + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 120000000 + * HCLK(Hz) = 120000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 8000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 240 + * PLL_P = 2 + * PLL_Q = 5 + * VDD(V) = 3.3 + * Flash Latency(WS) = 3 + * @param None + * @retval None + */ +static inline void SystemClock_Config(void) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000; + RCC_OscInitStruct.PLL.PLLN = 240; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 5; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); +} + +#endif diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c deleted file mode 100644 index dfbe7b743..000000000 --- a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" - -#include "stm32f2xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button -} - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 120000000 - * HCLK(Hz) = 120000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 4 - * APB2 Prescaler = 2 - * HSE Frequency(Hz) = 8000000 - * PLL_M = HSE_VALUE/1000000 - * PLL_N = 240 - * PLL_P = 2 - * PLL_Q = 5 - * VDD(V) = 3.3 - * Flash Latency(WS) = 3 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 240; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 5; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - - all_rcc_clk_enable(); - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clocks */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c new file mode 100644 index 000000000..8b1c56423 --- /dev/null +++ b/hw/bsp/stm32f2/family.c @@ -0,0 +1,150 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f2xx_hal.h" +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) { + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED + __HAL_RCC_GPIOC_CLK_ENABLE(); // Button +} + +void board_init(void) { + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + all_rcc_clk_enable(); + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake new file mode 100644 index 000000000..862680bce --- /dev/null +++ b/hw/bsp/stm32f2/family.cmake @@ -0,0 +1,112 @@ +include_guard() + +set(ST_FAMILY f2) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32F2 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32F2 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake b/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake new file mode 100644 index 000000000..7e02a7910 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f303xc) +set(JLINK_DEVICE stm32f303vc) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F303VCTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F303xC + ) +endfunction() diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.h b/hw/bsp/stm32f3/boards/stm32f303disco/board.h new file mode 100644 index 000000000..706149b49 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.h @@ -0,0 +1,61 @@ +#ifndef BOARD_H +#define BOARD_H + +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_9 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 72000000 + * HCLK(Hz) = 72000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 2 + * APB2 Prescaler = 1 + * HSE Frequency(Hz) = 8000000 + * HSE PREDIV = 1 + * PLLMUL = RCC_PLL_MUL9 (9) + * Flash Latency(WS) = 2 + * @param None + * @retval None + */ +static inline void SystemClock_Config(void) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Configures the USB clock */ + HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); + RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + /* Enable Power Clock */ + __HAL_RCC_PWR_CLK_ENABLE(); +} + +#endif diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c deleted file mode 100644 index d6a39a8e2..000000000 --- a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "stm32f3xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the -// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. - -// FIXME: Do all three need to be handled, or just the LP one? -// USB high-priority interrupt (Channel 74): Triggered only by a correct -// transfer event for isochronous and double-buffer bulk transfer to reach -// the highest possible transfer rate. -void USB_HP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB low-priority interrupt (Channel 75): Triggered by all USB events -// (Correct transfer, USB reset, etc.). The firmware has to check the -// interrupt source before serving the interrupt. -void USB_LP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB -// Suspend mode. -void USBWakeUp_RMP_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_9 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 8000000 - * HSE PREDIV = 1 - * PLLMUL = RCC_PLL_MUL9 (9) - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Configures the USB clock */ - HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); - RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - /* Enable Power Clock */ - __HAL_RCC_PWR_CLK_ENABLE(); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - // Remap the USB interrupts - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_REMAPINTERRUPT_USB_ENABLE(); - - // LED - __HAL_RCC_GPIOE_CLK_ENABLE(); - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure USB DM and DP pins */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF14_USB; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable USB clock - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h deleted file mode 100644 index 82d3765af..000000000 --- a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h +++ /dev/null @@ -1,357 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F3xx_HAL_CONF_H -#define __STM32F3xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SDADC_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) - * - External clock not generated on EVAL 373 - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 0U -#define DATA_CACHE_ENABLE 0U -#define USE_SPI_CRC 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/*#define USE_FULL_ASSERT 1U*/ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f3xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f3xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f3xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f3xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f3xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f3xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f3xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f3xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f3xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f3xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f3xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f3xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f3xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f3xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f3xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f3xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32f3xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f3xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f3xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f3xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f3xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED - #include "stm32f3xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f3xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f3xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f3xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SDADC_MODULE_ENABLED - #include "stm32f3xx_hal_sdadc.h" -#endif /* HAL_SDADC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f3xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f3xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f3xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f3xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f3xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f3xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f3xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f3xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F3xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f3/family.c b/hw/bsp/stm32f3/family.c new file mode 100644 index 000000000..7c194a694 --- /dev/null +++ b/hw/bsp/stm32f3/family.c @@ -0,0 +1,152 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f3xx_hal.h" +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the +// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. + +// FIXME: Do all three need to be handled, or just the LP one? +// USB high-priority interrupt (Channel 74): Triggered only by a correct +// transfer event for isochronous and double-buffer bulk transfer to reach +// the highest possible transfer rate. +void USB_HP_IRQHandler(void) { + tud_int_handler(0); +} + +// USB low-priority interrupt (Channel 75): Triggered by all USB events +// (Correct transfer, USB reset, etc.). The firmware has to check the +// interrupt source before serving the interrupt. +void USB_LP_IRQHandler(void) { + tud_int_handler(0); +} + +// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB +// Suspend mode. +void USBWakeUp_RMP_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + + +void board_init(void) { + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + // Remap the USB interrupts + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_REMAPINTERRUPT_USB_ENABLE(); + + // LED + __HAL_RCC_GPIOE_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure USB DM and DP pins */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF14_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable USB clock + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void HardFault_Handler(void) { + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { + +} diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake new file mode 100644 index 000000000..0a28e480b --- /dev/null +++ b/hw/bsp/stm32f3/family.cmake @@ -0,0 +1,110 @@ +include_guard() + +set(ST_FAMILY f3) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32F3 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32F3 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32f3/stm32f3xx_hal_conf.h b/hw/bsp/stm32f3/stm32f3xx_hal_conf.h new file mode 100644 index 000000000..82d3765af --- /dev/null +++ b/hw/bsp/stm32f3/stm32f3xx_hal_conf.h @@ -0,0 +1,357 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_CONF_H +#define __STM32F3xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_PWR_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SDADC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) + * - External clock not generated on EVAL 373 + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 0U +#define DATA_CACHE_ENABLE 0U +#define USE_SPI_CRC 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/*#define USE_FULL_ASSERT 1U*/ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f3xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f3xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f3xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f3xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f3xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f3xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f3xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f3xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f3xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f3xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f3xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f3xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f3xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f3xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f3xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f3xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f3xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32f3xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f3xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f3xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f3xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f3xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32f3xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f3xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f3xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f3xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SDADC_MODULE_ENABLED + #include "stm32f3xx_hal_sdadc.h" +#endif /* HAL_SDADC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f3xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f3xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f3xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f3xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f3xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f3xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f3xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f3xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F3xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f17d30f06..c2c09a1fc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -440,11 +440,15 @@ static void reset_core(dwc2_regs_t* dwc2) { } static bool phy_hs_supported(dwc2_regs_t* dwc2) { - // note: esp32 incorrect report its hs_phy_type as utmi + (void) dwc2; + #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + // note: esp32 incorrect report its hs_phy_type as utmi + return false; +#elif !TUD_OPT_HIGH_SPEED return false; #else - return TUD_OPT_HIGH_SPEED && dwc2->ghwcfg2_bm.hs_phy_type != HS_PHY_TYPE_NONE; + return dwc2->ghwcfg2_bm.hs_phy_type != HS_PHY_TYPE_NONE; #endif } -- cgit v1.3.1