From 6b28a4478c9f8fa3993d593360eb5574bbdeda22 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 15 Nov 2025 19:46:14 +0700 Subject: make TUP_DCD_EDPT_ISO_ALLOC i.e dcd_edpt_iso_alloc()/dcd_edpt_iso_activate() as default driver implementation. dcd_edpt_close() is deprecated and will be removed from all driver in the future. --- src/common/tusb_mcu.h | 335 ++++++++++++----------- src/device/dcd.h | 11 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 15 +- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 18 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 196 +++++++------ src/portable/dialog/da146xx/dcd_da146xx.c | 16 +- src/portable/microchip/pic/dcd_pic.c | 16 +- src/portable/microchip/pic32mz/dcd_pic32mz.c | 13 +- src/portable/microchip/samd/dcd_samd.c | 11 +- src/portable/microchip/samg/dcd_samg.c | 15 +- src/portable/microchip/samx7x/dcd_samx7x.c | 17 +- src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c | 299 ++++++++++---------- src/portable/nordic/nrf5x/dcd_nrf5x.c | 16 +- src/portable/nxp/khci/dcd_khci.c | 16 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 15 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 16 +- src/portable/raspberrypi/pio_usb/dcd_pio_usb.c | 14 +- src/portable/renesas/rusb2/dcd_rusb2.c | 16 +- src/portable/sunxi/dcd_sunxi_musb.c | 16 +- src/portable/ti/msp430x5xx/dcd_msp430x5xx.c | 16 +- src/portable/valentyusb/eptri/dcd_eptri.c | 15 +- src/portable/wch/dcd_ch32_usbfs.c | 13 +- src/portable/wch/dcd_ch32_usbhs.c | 27 +- 23 files changed, 692 insertions(+), 450 deletions(-) (limited to 'src') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index fd922ee56..05ae6929c 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -37,14 +37,14 @@ #ifdef __ARM_ARCH // ARM Architecture set __ARM_FEATURE_UNALIGNED to 1 for mcu supports unaligned access #if defined(__ARM_FEATURE_UNALIGNED) && __ARM_FEATURE_UNALIGNED == 1 - #define TUP_ARCH_STRICT_ALIGN 0 + #define TUP_ARCH_STRICT_ALIGN 0 #else - #define TUP_ARCH_STRICT_ALIGN 1 + #define TUP_ARCH_STRICT_ALIGN 1 #endif #else // TODO default to strict align for others // Should investigate other architecture such as risv, xtensa, mips for optimal setting - #define TUP_ARCH_STRICT_ALIGN 1 + #define TUP_ARCH_STRICT_ALIGN 1 #endif /* USB Controller Attributes for Device, Host or MCU (both) @@ -57,41 +57,41 @@ //--------------------------------------------------------------------+ // NXP //--------------------------------------------------------------------+ -#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) +#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) #define TUP_USBIP_IP3511 - #define TUP_DCD_ENDPOINT_MAX 5 + #define TUP_DCD_ENDPOINT_MAX 5 #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #define TUP_USBIP_OHCI #define TUP_USBIP_OHCI_NXP - #define TUP_OHCI_RHPORTS 2 + #define TUP_OHCI_RHPORTS 2 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) - #define TUP_USBIP_IP3511 - #define TUP_DCD_ENDPOINT_MAX 5 + #define TUP_USBIP_IP3511 + #define TUP_DCD_ENDPOINT_MAX 5 #elif TU_CHECK_MCU(OPT_MCU_LPC54) // TODO USB0 has 5, USB1 has 6 #define TUP_USBIP_IP3511 - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_LPC55) // TODO USB0 has 5, USB1 has 6 #define TUP_USBIP_IP3511 #define TUP_USBIP_OHCI #define TUP_USBIP_OHCI_NXP - #define TUP_OHCI_RHPORTS 1 // 1 downstream port + #define TUP_OHCI_RHPORTS 1 // 1 downstream port - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) // USB0 has 6 with HS PHY, USB1 has 4 only FS #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI - #define TUP_DCD_ENDPOINT_MAX 6 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_MCXN9) // USB0 is chipidea FS @@ -102,15 +102,15 @@ #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_MCXA15) // USB0 is chipidea FS #define TUP_USBIP_CHIPIDEA_FS #define TUP_USBIP_CHIPIDEA_FS_MCX - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #elif TU_CHECK_MCU(OPT_MCU_MIMXRT1XXX) #include "fsl_device_registers.h" @@ -118,60 +118,61 @@ #define TUP_USBIP_CHIPIDEA_HS #define TUP_USBIP_EHCI - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 #if __CORTEX_M == 7 - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT 1 - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT 1 - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT 1 + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT 1 + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #endif #elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32L, OPT_MCU_KINETIS_K) #define TUP_USBIP_CHIPIDEA_FS #define TUP_USBIP_CHIPIDEA_FS_KINETIS - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #elif TU_CHECK_MCU(OPT_MCU_MM32F327X) - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_EDPT_CLOSE_API //--------------------------------------------------------------------+ // Nordic //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_NRF5X) // 8 CBI + 1 ISO - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_EDPT_CLOSE_API #elif TU_CHECK_MCU(OPT_MCU_NRF54) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_NRF - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 //--------------------------------------------------------------------+ // Microchip //--------------------------------------------------------------------+ -#elif TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML2X, OPT_MCU_SAMD21) || \ - TU_CHECK_MCU(OPT_MCU_SAMD51, OPT_MCU_SAME5X) - #define TUP_DCD_ENDPOINT_MAX 8 +#elif TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML2X, OPT_MCU_SAMD21) || TU_CHECK_MCU(OPT_MCU_SAMD51, OPT_MCU_SAME5X) + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_SAMG) - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY #elif TU_CHECK_MCU(OPT_MCU_SAMX7X) - #define TUP_DCD_ENDPOINT_MAX 10 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 10 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY #elif TU_CHECK_MCU(OPT_MCU_PIC32MZ) - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY -#elif TU_CHECK_MCU(OPT_MCU_PIC32MX, OPT_MCU_PIC32MM, OPT_MCU_PIC32MK) || \ - TU_CHECK_MCU(OPT_MCU_PIC24, OPT_MCU_DSPIC33) - #define TUP_DCD_ENDPOINT_MAX 16 +#elif TU_CHECK_MCU(OPT_MCU_PIC32MX, OPT_MCU_PIC32MM, OPT_MCU_PIC32MK) || TU_CHECK_MCU(OPT_MCU_PIC24, OPT_MCU_DSPIC33) + #define TUP_DCD_ENDPOINT_MAX 16 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY + #define TUP_DCD_EDPT_CLOSE_API //--------------------------------------------------------------------+ // ST @@ -179,23 +180,23 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32F0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32F1) // - F102, F103 use fsdev // - F105, F107 use dwc2 - #if defined (STM32F105x8) || defined (STM32F105xB) || defined (STM32F105xC) || \ - defined (STM32F107xB) || defined (STM32F107xC) + #if defined(STM32F105x8) || defined(STM32F105xB) || defined(STM32F105xC) || defined(STM32F107xB) || \ + defined(STM32F107xC) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 - #define TUP_DCD_ENDPOINT_MAX 4 - #elif defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) + #define TUP_DCD_ENDPOINT_MAX 4 + #elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #else #error "Unsupported STM32F1 mcu" #endif @@ -205,55 +206,55 @@ #define TUP_USBIP_DWC2_STM32 // FS has 4 ep, HS has 5 ep - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_STM32F3) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32F4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9 - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_STM32F7) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 // FS has 6, HS has 9 - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 // MCU with on-chip HS Phy #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx) - #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS + #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS #endif // Enable dcache if DMA is enabled - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #elif TU_CHECK_MCU(OPT_MCU_STM32H7) #include "stm32h7xx.h" #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 #if __CORTEX_M == 7 // Enable dcache if DMA is enabled - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 32 #endif #elif TU_CHECK_MCU(OPT_MCU_STM32H5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32G4) // Device controller @@ -262,41 +263,40 @@ // TypeC controller #define TUP_USBIP_TYPEC_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #define TUP_TYPEC_RHPORTS_NUM 1 #elif TU_CHECK_MCU(OPT_MCU_STM32G0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32C0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32L0, OPT_MCU_STM32L1) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32L4) // - L4x2, L4x3 use fsdev // - L4x4, L4x6, L4x7, L4x9 use dwc2 - #if defined (STM32L475xx) || defined (STM32L476xx) || \ - defined (STM32L485xx) || defined (STM32L486xx) || defined (STM32L496xx) || \ - defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \ - defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || \ - defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx) + #if defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \ + defined(STM32L496xx) || defined(STM32L4A6xx) || defined(STM32L4P5xx) || defined(STM32L4Q5xx) || \ + defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || \ + defined(STM32L4S7xx) || defined(STM32L4S9xx) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #elif defined(STM32L412xx) || defined(STM32L422xx) || defined(STM32L432xx) || defined(STM32L433xx) || \ - defined(STM32L442xx) || defined(STM32L443xx) || defined(STM32L452xx) || defined(STM32L462xx) + defined(STM32L442xx) || defined(STM32L443xx) || defined(STM32L452xx) || defined(STM32L462xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #else #error "Unsupported STM32L4 mcu" #endif @@ -304,19 +304,19 @@ #elif TU_CHECK_MCU(OPT_MCU_STM32WB) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32WBA) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 #elif TU_CHECK_MCU(OPT_MCU_STM32U5) - #if defined (STM32U535xx) || defined (STM32U545xx) + #if defined(STM32U535xx) || defined(STM32U545xx) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #else #define TUP_USBIP_DWC2 @@ -324,38 +324,38 @@ // U59x/5Ax/5Fx/5Gx are highspeed with built-in HS PHY #if defined(STM32U595xx) || defined(STM32U599xx) || defined(STM32U5A5xx) || defined(STM32U5A9xx) || \ - defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) - #define TUP_DCD_ENDPOINT_MAX 9 - #define TUP_RHPORT_HIGHSPEED 1 + defined(STM32U5F7xx) || defined(STM32U5F9xx) || defined(STM32U5G7xx) || defined(STM32U5G9xx) + #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_RHPORT_HIGHSPEED 1 #else - #define TUP_DCD_ENDPOINT_MAX 6 + #define TUP_DCD_ENDPOINT_MAX 6 #endif #endif #elif TU_CHECK_MCU(OPT_MCU_STM32L5) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U0) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32U3) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_STM32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_STM32H7RS, OPT_MCU_STM32N6) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_STM32 // FS has 6, HS has 9 - #define TUP_DCD_ENDPOINT_MAX 9 + #define TUP_DCD_ENDPOINT_MAX 9 // MCU with on-chip HS Phy - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_RHPORT_HIGHSPEED 1 // Enable dcache if DMA is enabled #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE @@ -366,43 +366,39 @@ // Sony //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_CXD56) - #define TUP_DCD_ENDPOINT_MAX 7 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 7 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY - #define TUP_DCD_EDPT_ISO_ALLOC //--------------------------------------------------------------------+ // TI //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_MSP430x5xx) - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_MSP432E4, OPT_MCU_TM4C123, OPT_MCU_TM4C129) #define TUP_USBIP_MUSB #define TUP_USBIP_MUSB_TI - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 //--------------------------------------------------------------------+ // ValentyUSB (Litex) //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_VALENTYUSB_EPTRI) - #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_DCD_ENDPOINT_MAX 16 //--------------------------------------------------------------------+ // Nuvoton //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_NUC121, OPT_MCU_NUC126) - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_DCD_EDPT_ISO_ALLOC + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_NUC120) - #define TUP_DCD_ENDPOINT_MAX 6 - #define TUP_DCD_EDPT_ISO_ALLOC + #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_NUC505) - #define TUP_DCD_ENDPOINT_MAX 12 - #define TUP_RHPORT_HIGHSPEED 1 - #define TUP_DCD_EDPT_ISO_ALLOC + #define TUP_DCD_ENDPOINT_MAX 12 + #define TUP_RHPORT_HIGHSPEED 1 //--------------------------------------------------------------------+ // Espressif @@ -410,114 +406,124 @@ #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_ESP32H4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_ESP32 - #define TUP_DCD_ENDPOINT_MAX 7 // only 5 TX FIFO for endpoint IN - #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + #define TUP_DCD_ENDPOINT_MAX 7 // only 5 TX FIFO for endpoint IN + + // clang-format off + #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format on #if CFG_TUSB_MCU == OPT_MCU_ESP32S3 #define TUP_MCU_MULTIPLE_CORE 1 #endif // Disable slave if DMA is enabled - #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE #elif TU_CHECK_MCU(OPT_MCU_ESP32P4) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_ESP32 - #define TUP_RHPORT_HIGHSPEED 1 // port0 FS, port1 HS - #define TUP_DCD_ENDPOINT_MAX 16 // FS 7 ep, HS 16 ep + #define TUP_RHPORT_HIGHSPEED 1 // port0 FS, port1 HS + #define TUP_DCD_ENDPOINT_MAX 16 // FS 7 ep, HS 16 ep - #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format off + #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format on - #define TUP_MCU_MULTIPLE_CORE 1 + #define TUP_MCU_MULTIPLE_CORE 1 // Disable slave if DMA is enabled - #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT !CFG_TUH_DWC2_DMA_ENABLE // Enable dcache if DMA is enabled - #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE - #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE - #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 64 + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT CFG_TUH_DWC2_DMA_ENABLE + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 64 -#elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU_ESP32C5, OPT_MCU_ESP32C6, OPT_MCU_ESP32C61, OPT_MCU_ESP32H2) +#elif TU_CHECK_MCU(OPT_MCU_ESP32, OPT_MCU_ESP32C2, OPT_MCU_ESP32C3, OPT_MCU_ESP32C5, OPT_MCU_ESP32C6, \ + OPT_MCU_ESP32C61, OPT_MCU_ESP32H2) #if (CFG_TUD_ENABLED || !(defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421)) - #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" + #error "MCUs are only supported with CFG_TUH_MAX3421 enabled" #endif - #define TUP_DCD_ENDPOINT_MAX 0 - #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + #define TUP_DCD_ENDPOINT_MAX 0 + + // clang-format off + #define CFG_TUSB_OS_INC_PATH_DEFAULT freertos/ + // clang-format on + //--------------------------------------------------------------------+ // Dialog //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_DA1469X) - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_EDPT_CLOSE_API //--------------------------------------------------------------------+ // Raspberry Pi //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_RP2040) - #define TUP_DCD_EDPT_ISO_ALLOC - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_MCU_MULTIPLE_CORE 1 + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_MCU_MULTIPLE_CORE 1 - #define TU_ATTR_FAST_FUNC __not_in_flash("tinyusb") + #define TU_ATTR_FAST_FUNC __not_in_flash("tinyusb") //--------------------------------------------------------------------+ // Silabs //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_EFM32GG) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 7 + #define TUP_DCD_ENDPOINT_MAX 7 //--------------------------------------------------------------------+ // Renesas //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N, OPT_MCU_RAXXX) #define TUP_USBIP_RUSB2 - #define TUP_DCD_ENDPOINT_MAX 10 + #define TUP_DCD_ENDPOINT_MAX 10 //--------------------------------------------------------------------+ // GigaDevice //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_GD32VF103) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 //--------------------------------------------------------------------+ // Broadcom //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 //--------------------------------------------------------------------+ // Infineon //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_XMC4000) #define TUP_USBIP_DWC2 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 //--------------------------------------------------------------------+ // BridgeTek //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_FT90X) - #define TUP_DCD_ENDPOINT_MAX 8 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY #elif TU_CHECK_MCU(OPT_MCU_FT93X) - #define TUP_DCD_ENDPOINT_MAX 16 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 16 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY //--------------------------------------------------------------------+ // Allwinner //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_F1C100S) - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 //--------------------------------------------------------------------+ // WCH @@ -527,31 +533,31 @@ #define TUP_USBIP_WCH_USBFS #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 0 + #define CFG_TUD_WCH_USBIP_USBFS 0 #endif #if !defined(CFG_TUD_WCH_USBIP_USBHS) - #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif - #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) #elif TU_CHECK_MCU(OPT_MCU_CH32V103) #define TUP_USBIP_WCH_USBFS #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 1 + #define CFG_TUD_WCH_USBIP_USBFS 1 #endif - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_CH32V20X) // v20x support both port0 FSDEV (USBD) and port1 USBFS #define TUP_USBIP_WCH_USBFS #ifndef CFG_TUH_WCH_USBIP_USBFS - #define CFG_TUH_WCH_USBIP_USBFS 1 + #define CFG_TUH_WCH_USBIP_USBFS 1 #endif #define TUP_USBIP_FSDEV @@ -559,14 +565,14 @@ // default to FSDEV for device #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 0 + #define CFG_TUD_WCH_USBIP_USBFS 0 #endif #if !defined(CFG_TUD_WCH_USBIP_FSDEV) - #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #define CFG_TUD_WCH_USBIP_FSDEV (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_CH32V307) // v307 support both FS and HS, default to HS @@ -574,15 +580,15 @@ #define TUP_USBIP_WCH_USBFS #if !defined(CFG_TUD_WCH_USBIP_USBFS) - #define CFG_TUD_WCH_USBIP_USBFS 0 + #define CFG_TUD_WCH_USBIP_USBFS 0 #endif #if !defined(CFG_TUD_WCH_USBIP_USBHS) - #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) + #define CFG_TUD_WCH_USBIP_USBHS (CFG_TUD_WCH_USBIP_USBFS ? 0 : 1) #endif - #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS - #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) //--------------------------------------------------------------------+ // Analog Devices @@ -590,8 +596,8 @@ #elif TU_CHECK_MCU(OPT_MCU_MAX32650, OPT_MCU_MAX32666, OPT_MCU_MAX32690, OPT_MCU_MAX78002) #define TUP_USBIP_MUSB #define TUP_USBIP_MUSB_ADI - #define TUP_DCD_ENDPOINT_MAX 12 - #define TUP_RHPORT_HIGHSPEED 1 + #define TUP_DCD_ENDPOINT_MAX 12 + #define TUP_RHPORT_HIGHSPEED 1 #define TUD_ENDPOINT_ONE_DIRECTION_ONLY //--------------------------------------------------------------------+ @@ -600,46 +606,44 @@ #elif TU_CHECK_MCU(OPT_MCU_AT32F403A_407) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F413) #define TUP_USBIP_FSDEV #define TUP_USBIP_FSDEV_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F415) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 4 + #define TUP_DCD_ENDPOINT_MAX 4 #elif TU_CHECK_MCU(OPT_MCU_AT32F435_437) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F423) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #elif TU_CHECK_MCU(OPT_MCU_AT32F402_405) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 // AT32F405xx has on-chip HS PHY - #if defined(AT32F405CBT7) || defined(AT32F405CBU7) || \ - defined(AT32F405CCT7) || defined(AT32F405CCU7) || \ - defined(AT32F405KBU7_4) || defined(AT32F405KCU7_4) || \ - defined(AT32F405RBT7_7) || defined(AT32F405RBT7) || \ - defined(AT32F405RCT7_7) || defined(AT32F405RCT7) - #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS + #if defined(AT32F405CBT7) || defined(AT32F405CBU7) || defined(AT32F405CCT7) || defined(AT32F405CCU7) || \ + defined(AT32F405KBU7_4) || defined(AT32F405KCU7_4) || defined(AT32F405RBT7_7) || defined(AT32F405RBT7) || \ + defined(AT32F405RCT7_7) || defined(AT32F405RCT7) + #define TUP_RHPORT_HIGHSPEED 1 // Port0: FS, Port1: HS #endif #elif TU_CHECK_MCU(OPT_MCU_AT32F425) #define TUP_USBIP_DWC2 #define TUP_USBIP_DWC2_AT32 - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #endif @@ -649,7 +653,7 @@ #if defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 #ifndef CFG_TUH_MAX3421_ENDPOINT_TOTAL - #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4*(CFG_TUH_DEVICE_MAX-1)) + #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4 * (CFG_TUH_DEVICE_MAX - 1)) #endif #endif @@ -659,17 +663,17 @@ //--------------------------------------------------------------------+ #ifndef TUP_MCU_MULTIPLE_CORE -#define TUP_MCU_MULTIPLE_CORE 0 + #define TUP_MCU_MULTIPLE_CORE 0 #endif #if !defined(TUP_DCD_ENDPOINT_MAX) && defined(CFG_TUD_ENABLED) && CFG_TUD_ENABLED #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8" - #define TUP_DCD_ENDPOINT_MAX 8 + #define TUP_DCD_ENDPOINT_MAX 8 #endif // Default to fullspeed if not defined #ifndef TUP_RHPORT_HIGHSPEED - #define TUP_RHPORT_HIGHSPEED 0 + #define TUP_RHPORT_HIGHSPEED 0 #endif // fast function, normally mean placing function in SRAM @@ -677,8 +681,13 @@ #define TU_ATTR_FAST_FUNC #endif -// USBIP that support ISO alloc & activate API -#if defined(TUP_USBIP_DWC2) || defined(TUP_USBIP_FSDEV) || defined(TUP_USBIP_MUSB) +#if defined(TUP_USBIP_CHIPIDEA_FS) || defined(TUP_USBIP_IP3511) || defined(TUP_USBIP_RUSB2) || \ + (defined(TUP_USBIP_WCH_USBFS) && CFG_TUD_WCH_USBIP_USBFS) + #define TUP_DCD_EDPT_CLOSE_API +#endif + +// USBIP implement dcd_edpt_close() and does not support ISO alloc & activate API +#ifndef TUP_DCD_EDPT_CLOSE_API #define TUP_DCD_EDPT_ISO_ALLOC #endif diff --git a/src/device/dcd.h b/src/device/dcd.h index 1b0289280..353f836ee 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -171,7 +171,12 @@ void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr); // This API never calls with control endpoints, since it is auto cleared when receiving setup packet void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr); -#ifdef TUP_DCD_EDPT_ISO_ALLOC +#ifdef TUP_DCD_EDPT_CLOSE_API +// Close an endpoint. +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr); + +#else + // Allocate packet buffer used by ISO endpoints // Some MCU need manual packet buffer allocation, we allocate the largest size to avoid clustering bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size); @@ -179,10 +184,6 @@ bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet // Configure and enable an ISO endpoint according to descriptor bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); -#else -// Close an endpoint. -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr); - #endif //--------------------------------------------------------------------+ diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 34a8be3b6..6ed4be410 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -806,6 +806,20 @@ void dcd_edpt_close_all(uint8_t rhport) _ft9xx_reset_edpts(); } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + + // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { @@ -1200,5 +1214,4 @@ void ft9xx_usbd_pm_ISR(void) } } } - #endif diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 11ddb683f..8b5c42aa2 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -399,6 +399,7 @@ void dcd_edpt_close_all(uint8_t rhport) } } +#ifdef TUP_DCD_EDPT_CLOSE_API void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { const unsigned epn = tu_edpt_number(ep_addr); @@ -419,6 +420,22 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) dcd_int_enable(rhport); } +#else + +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { const unsigned epn = tu_edpt_number(ep_addr); @@ -564,5 +581,4 @@ void dcd_int_handler(uint8_t rhport) process_tokdne(rhport); } } - #endif diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index 244f5a2d4..8c5253eb9 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -64,16 +64,19 @@ bool dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { //--------------------------------------------------------------------+ // ENDPTCTRL +enum { + ENDPTCTRL_TYPE_POS = 2, // Endpoint type is 2-bit field +}; + enum { ENDPTCTRL_STALL = TU_BIT(0), ENDPTCTRL_TOGGLE_INHIBIT = TU_BIT(5), // used for test only ENDPTCTRL_TOGGLE_RESET = TU_BIT(6), - ENDPTCTRL_ENABLE = TU_BIT(7) + ENDPTCTRL_ENABLE = TU_BIT(7), }; -enum { - ENDPTCTRL_TYPE_POS = 2, // Endpoint type is 2-bit field -}; +#define ENDPTCTRL_TYPE(_type) ((_type) << ENDPTCTRL_TYPE_POS) + #define ENDPTCTRL_RESET_MASK (ENDPTCTRL_TYPE(TUSB_XFER_BULK) | (ENDPTCTRL_TYPE(TUSB_XFER_BULK) << 16u)) // USBSTS, USBINTR enum { @@ -170,9 +173,7 @@ static dcd_data_t _dcd_data; // Prototypes and Helper Functions //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE -static inline uint8_t ci_ep_count(ci_hs_regs_t const* dcd_reg) -{ +TU_ATTR_ALWAYS_INLINE static inline uint8_t ci_ep_count(const ci_hs_regs_t *dcd_reg) { return dcd_reg->DCCPARAMS & DCCPARAMS_DEN_MASK; } @@ -191,9 +192,8 @@ static void bus_reset(uint8_t rhport) // type (e.g. bulk). Leaving an un-configured endpoint control will cause undefined behavior // for the data PID tracking on the active endpoint. uint8_t const ep_count = ci_ep_count(dcd_reg); - for( uint8_t i=1; i < ep_count; i++) - { - dcd_reg->ENDPTCTRL[i] = (TUSB_XFER_BULK << ENDPTCTRL_TYPE_POS) | (TUSB_XFER_BULK << (16+ENDPTCTRL_TYPE_POS)); + for (uint8_t i = 1; i < ep_count; i++) { + dcd_reg->ENDPTCTRL[i] = ENDPTCTRL_RESET_MASK; } //------------- Clear All Registers -------------// @@ -315,26 +315,25 @@ void dcd_sof_enable(uint8_t rhport, bool en) // HELPER //--------------------------------------------------------------------+ -static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) -{ - dcd_dcache_clean_invalidate((uint32_t*) tu_align((uint32_t) data_ptr, 4), total_bytes); +static void qtd_init(dcd_qtd_t *p_qtd, void *data_ptr, uint16_t total_bytes) { + dcd_dcache_clean_invalidate((uint32_t *)tu_align((uint32_t)data_ptr, 4), total_bytes); tu_memclr(p_qtd, sizeof(dcd_qtd_t)); - p_qtd->next = QTD_NEXT_INVALID; - p_qtd->active = 1; - p_qtd->total_bytes = p_qtd->expected_bytes = total_bytes; - p_qtd->int_on_complete = true; + p_qtd->next = QTD_NEXT_INVALID; + p_qtd->active = 1; + p_qtd->total_bytes = p_qtd->expected_bytes = total_bytes; + p_qtd->int_on_complete = true; - if (data_ptr != NULL) - { - p_qtd->buffer[0] = (uint32_t) data_ptr; + if (data_ptr != NULL) { + p_qtd->buffer[0] = (uint32_t)data_ptr; - uint32_t const bufend = p_qtd->buffer[0] + total_bytes; - for(uint8_t i=1; i<5; i++) - { - uint32_t const next_page = tu_align4k( p_qtd->buffer[i-1] ) + 4096; - if ( bufend <= next_page ) break; + const uint32_t bufend = p_qtd->buffer[0] + total_bytes; + for (uint8_t i = 1; i < 5; i++) { + const uint32_t next_page = tu_align4k(p_qtd->buffer[i - 1]) + 4096; + if (bufend <= next_page) { + break; + } p_qtd->buffer[i] = next_page; @@ -346,6 +345,35 @@ static void qtd_init(dcd_qtd_t* p_qtd, void * data_ptr, uint16_t total_bytes) //--------------------------------------------------------------------+ // DCD Endpoint Port //--------------------------------------------------------------------+ +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_write(volatile uint32_t *epctrl, uint8_t dir, uint32_t value) { + if (dir == TUSB_DIR_OUT) { + *epctrl = (*epctrl & 0xFFFF0000u) | value; + } else { + *epctrl = (*epctrl & 0x0000FFFFu) | (value << 16); + } +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_mask(volatile uint32_t *epctrl, uint8_t dir, uint32_t and_mask, + uint32_t or_mask) { + uint32_t value = *epctrl; + if (and_mask != 0) { + value &= (dir == TUSB_DIR_OUT) ? and_mask : (and_mask << 16u); + } + if (or_mask != 0) { + value |= (dir == TUSB_DIR_OUT) ? or_mask : (or_mask << 16u); + } + + *epctrl = value; +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_set(volatile uint32_t *epctrl, uint8_t dir, uint32_t mask) { + ep_ctrl_mask(epctrl, dir, 0, mask); +} + +TU_ATTR_ALWAYS_INLINE static inline void ep_ctrl_clear(volatile uint32_t *epctrl, uint8_t dir, uint32_t mask) { + ep_ctrl_mask(epctrl, dir, ~mask, 0); +} + void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { uint8_t const epnum = tu_edpt_number(ep_addr); @@ -366,80 +394,91 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) // data toggle also need to be reset ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); dcd_reg->ENDPTCTRL[epnum] |= ENDPTCTRL_TOGGLE_RESET << ( dir ? 16 : 0 ); - dcd_reg->ENDPTCTRL[epnum] &= ~(ENDPTCTRL_STALL << ( dir ? 16 : 0)); + dcd_reg->ENDPTCTRL[epnum] &= ~(ENDPTCTRL_STALL << (dir ? 16 : 0)); } -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) -{ - uint8_t const epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress); - uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress); - - ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); - - // Must not exceed max endpoint number - TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - - //------------- Prepare Queue Head -------------// - dcd_qhd_t * p_qhd = &_dcd_data.qhd[epnum][dir]; +static void qhd_init(dcd_qhd_t *p_qhd, uint16_t max_packet_size, uint8_t iso_mult) { tu_memclr(p_qhd, sizeof(dcd_qhd_t)); - p_qhd->zero_length_termination = 1; - p_qhd->max_packet_size = tu_edpt_packet_size(p_endpoint_desc); - if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) - { - p_qhd->iso_mult = 1; - } - + p_qhd->max_packet_size = max_packet_size; + p_qhd->iso_mult = iso_mult; p_qhd->qtd_overlay.next = QTD_NEXT_INVALID; - dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); +} - // Enable EP Control - uint32_t const epctrl = (p_endpoint_desc->bmAttributes.xfer << ENDPTCTRL_TYPE_POS) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *endpoint_desc) { + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + const uint8_t epnum = tu_edpt_number(endpoint_desc->bEndpointAddress); + const uint8_t dir = tu_edpt_dir(endpoint_desc->bEndpointAddress); + const uint8_t xfer_type = endpoint_desc->bmAttributes.xfer; + TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - if ( dir == TUSB_DIR_OUT ) - { - dcd_reg->ENDPTCTRL[epnum] = (dcd_reg->ENDPTCTRL[epnum] & 0xFFFF0000u) | epctrl; - }else - { - dcd_reg->ENDPTCTRL[epnum] = (dcd_reg->ENDPTCTRL[epnum] & 0x0000FFFFu) | (epctrl << 16); - } + dcd_qhd_t *p_qhd = &_dcd_data.qhd[epnum][dir]; + qhd_init(p_qhd, tu_edpt_packet_size(endpoint_desc), 0u); + + // EP Control + const uint32_t epctrl = ENDPTCTRL_TYPE(xfer_type) | ENDPTCTRL_ENABLE | ENDPTCTRL_TOGGLE_RESET; + ep_ctrl_write(&dcd_reg->ENDPTCTRL[epnum], dir, epctrl); return true; } -void dcd_edpt_close_all (uint8_t rhport) -{ - ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; - // Disable all non-control endpoints - uint8_t const ep_count = ci_ep_count(dcd_reg); - for (uint8_t epnum = 1; epnum < ep_count; epnum++) - { - _dcd_data.qhd[epnum][TUSB_DIR_OUT].qtd_overlay.halted = 1; - _dcd_data.qhd[epnum][TUSB_DIR_IN ].qtd_overlay.halted = 1; + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + const uint8_t epnum = tu_edpt_number(ep_addr); + const uint8_t dir = tu_edpt_dir(ep_addr); + TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - dcd_reg->ENDPTFLUSH = TU_BIT(epnum) | TU_BIT(epnum+16); - dcd_reg->ENDPTCTRL[epnum] = (TUSB_XFER_BULK << ENDPTCTRL_TYPE_POS) | (TUSB_XFER_BULK << (16+ENDPTCTRL_TYPE_POS)); - } + // EP Control: set type but not enabled yet + const uint32_t epctrl = ENDPTCTRL_TYPE(TUSB_XFER_ISOCHRONOUS) | ENDPTCTRL_TOGGLE_RESET; + ep_ctrl_write(&dcd_reg->ENDPTCTRL[epnum], dir, epctrl); + + return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + const uint8_t epnum = tu_edpt_number(desc_ep->bEndpointAddress); + const uint8_t dir = tu_edpt_dir(desc_ep->bEndpointAddress); + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + TU_ASSERT(epnum < ci_ep_count(dcd_reg)); - ci_hs_regs_t* dcd_reg = CI_HS_REG(rhport); + dcd_qhd_t *p_qhd = &_dcd_data.qhd[epnum][dir]; + volatile uint32_t *endptctrl = &dcd_reg->ENDPTCTRL[epnum]; - _dcd_data.qhd[epnum][dir].qtd_overlay.halted = 1; + // _dcd_data.qhd[epnum][dir].qtd_overlay.halted = 1; + // dcd_dcache_clean_invalidate(&_dcd_data, sizeof(dcd_data_t)); // Flush EP - uint32_t const flush_mask = TU_BIT(epnum + (dir ? 16 : 0)); - dcd_reg->ENDPTFLUSH = flush_mask; - while(dcd_reg->ENDPTFLUSH & flush_mask); + const uint32_t flush_mask = TU_BIT(epnum + (dir ? 16 : 0)); + dcd_reg->ENDPTFLUSH = flush_mask; + while (dcd_reg->ENDPTFLUSH & flush_mask) {} + + // disable to change max packet size + ep_ctrl_clear(endptctrl, dir, ENDPTCTRL_ENABLE); - // Clear EP enable - dcd_reg->ENDPTCTRL[epnum] &=~(ENDPTCTRL_ENABLE << (dir ? 16 : 0)); + qhd_init(p_qhd, tu_edpt_packet_size(desc_ep), 1u); + + ep_ctrl_set(endptctrl, dir, ENDPTCTRL_ENABLE); + + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) { + ci_hs_regs_t *dcd_reg = CI_HS_REG(rhport); + + // Disable all non-control endpoints + uint8_t const ep_count = ci_ep_count(dcd_reg); + for (uint8_t epnum = 1; epnum < ep_count; epnum++) { + _dcd_data.qhd[epnum][TUSB_DIR_OUT].qtd_overlay.halted = 1; + _dcd_data.qhd[epnum][TUSB_DIR_IN].qtd_overlay.halted = 1; + + dcd_reg->ENDPTFLUSH = TU_BIT(epnum) | TU_BIT(epnum + 16); + dcd_reg->ENDPTCTRL[epnum] = ENDPTCTRL_RESET_MASK; + } } static void qhd_start_xfer(uint8_t rhport, uint8_t epnum, uint8_t dir) @@ -678,5 +717,4 @@ void dcd_int_handler(uint8_t rhport) dcd_event_sof(rhport, frame, true); } } - #endif diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c index 56ecb7575..868a10dd9 100644 --- a/src/portable/dialog/da146xx/dcd_da146xx.c +++ b/src/portable/dialog/da146xx/dcd_da146xx.c @@ -1025,6 +1025,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) tu_memclr(xfer, sizeof(*xfer)); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); @@ -1218,5 +1233,4 @@ void dcd_int_handler(uint8_t rhport) handle_alt_ev(); } } - #endif diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index b4a698199..8413a7ddd 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -687,6 +687,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) if (ie) intr_enable(rhport); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { @@ -866,5 +881,4 @@ void dcd_int_handler(uint8_t rhport) intr_clear(rhport); } - #endif diff --git a/src/portable/microchip/pic32mz/dcd_pic32mz.c b/src/portable/microchip/pic32mz/dcd_pic32mz.c index cbd157d6b..b039bb505 100644 --- a/src/portable/microchip/pic32mz/dcd_pic32mz.c +++ b/src/portable/microchip/pic32mz/dcd_pic32mz.c @@ -438,12 +438,20 @@ void dcd_edpt_close_all (uint8_t rhport) } } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; (void) ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { uint8_t const epnum = tu_edpt_number(ep_addr); @@ -744,5 +752,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/microchip/samd/dcd_samd.c b/src/portable/microchip/samd/dcd_samd.c index e43439f2a..383cf60e5 100644 --- a/src/portable/microchip/samd/dcd_samd.c +++ b/src/portable/microchip/samd/dcd_samd.c @@ -245,11 +245,17 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) return true; } -void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) { +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; (void) ep_addr; + (void)largest_packet_size; + return false; +} - // TODO: implement if necessary? +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -427,5 +433,4 @@ void dcd_int_handler (uint8_t rhport) // Handle complete transfer maybe_transfer_complete(); } - #endif diff --git a/src/portable/microchip/samg/dcd_samg.c b/src/portable/microchip/samg/dcd_samg.c index a5c768839..879b2eb2b 100644 --- a/src/portable/microchip/samg/dcd_samg.c +++ b/src/portable/microchip/samg/dcd_samg.c @@ -270,9 +270,17 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -494,5 +502,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 8aec1568d..51308f7a2 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -559,15 +559,17 @@ void dcd_edpt_close_all (uint8_t rhport) // TODO implement dcd_edpt_close_all() } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; - uint8_t const epnum = tu_edpt_number(ep_addr); + (void) ep_addr; + (void) largest_packet_size; + return false; +} - // Disable endpoint interrupt - USB_REG->DEVIDR = 1 << (DEVIDR_PEP_0_Pos + epnum); - // Disable EP - USB_REG->DEVEPT &=~(1 << (DEVEPT_EPEN0_Pos + epnum)); +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; } static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix) @@ -773,5 +775,4 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) USB_REG->DEVEPTIDR[epnum] = DEVEPTIDR_CTRL_STALLRQC; USB_REG->DEVEPTIER[epnum] = HSTPIPIER_RSTDTS; } - #endif diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index 1ce3da27e..a232810a2 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -26,7 +26,7 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_MM32F327X ) +#if CFG_TUD_ENABLED && (CFG_TUSB_MCU == OPT_MCU_MM32F327X) #include "reg_usb_otg_fs.h" #include "mm32_device.h" @@ -43,56 +43,53 @@ enum { TOK_PID_SETUP = 0xDu, }; -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { union { uint32_t head; struct { union { struct { - uint16_t : 2; - uint16_t tok_pid : 4; - uint16_t data : 1; - uint16_t own : 1; - uint16_t : 8; + uint16_t : 2; + uint16_t tok_pid : 4; + uint16_t data : 1; + uint16_t own : 1; + uint16_t : 8; }; struct { - uint16_t : 2; - uint16_t bdt_stall: 1; - uint16_t dts : 1; - uint16_t ninc : 1; - uint16_t keep : 1; - uint16_t : 10; + uint16_t : 2; + uint16_t bdt_stall : 1; + uint16_t dts : 1; + uint16_t ninc : 1; + uint16_t keep : 1; + uint16_t : 10; }; }; - uint16_t bc : 10; - uint16_t : 6; + uint16_t bc : 10; + uint16_t : 6; }; }; uint8_t *addr; -}buffer_descriptor_t; +} buffer_descriptor_t; -TU_VERIFY_STATIC( sizeof(buffer_descriptor_t) == 8, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(buffer_descriptor_t) == 8, "size is not correct"); -typedef struct TU_ATTR_PACKED -{ +typedef struct TU_ATTR_PACKED { union { uint32_t state; struct { - uint32_t max_packet_size :11; + uint32_t max_packet_size : 11; uint32_t : 5; uint32_t odd : 1; - uint32_t :15; + uint32_t : 15; }; }; uint16_t length; uint16_t remaining; -}endpoint_state_t; +} endpoint_state_t; -TU_VERIFY_STATIC( sizeof(endpoint_state_t) == 8, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(endpoint_state_t) == 8, "size is not correct"); -typedef struct -{ +typedef struct { union { /* [#EP][OUT,IN][EVEN,ODD] */ buffer_descriptor_t bdt[16][2][2]; @@ -104,7 +101,7 @@ typedef struct }; uint8_t setup_packet[8]; uint8_t addr; -}dcd_data_t; +} dcd_data_t; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION @@ -112,10 +109,9 @@ typedef struct // BDT(Buffer Descriptor Table) must be 256-byte aligned CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; -TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); +TU_VERIFY_STATIC(sizeof(_dcd.bdt) == 512, "size is not correct"); -static void prepare_next_setup_packet(uint8_t rhport) -{ +static void prepare_next_setup_packet(uint8_t rhport) { const unsigned out_odd = _dcd.endpoint[0][0].odd; const unsigned in_odd = _dcd.endpoint[0][1].odd; if (_dcd.bdt[0][0][out_odd].own) { @@ -126,12 +122,10 @@ static void prepare_next_setup_packet(uint8_t rhport) _dcd.bdt[0][0][out_odd ^ 1].data = 1; _dcd.bdt[0][1][in_odd].data = 1; _dcd.bdt[0][1][in_odd ^ 1].data = 0; - dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), - _dcd.setup_packet, sizeof(_dcd.setup_packet)); + dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_OUT), _dcd.setup_packet, sizeof(_dcd.setup_packet)); } -static void process_stall(uint8_t rhport) -{ +static void process_stall(uint8_t rhport) { if (USB_OTG_FS->EP_CTL[0] & USB_ENDPT_EPSTALL_MASK) { /* clear stall condition of the control pipe */ prepare_next_setup_packet(rhport); @@ -139,13 +133,12 @@ static void process_stall(uint8_t rhport) } } -static void process_tokdne(uint8_t rhport) -{ - const unsigned s = USB_OTG_FS->STAT; - USB_OTG_FS->INT_STAT = USB_ISTAT_TOKDNE_MASK; /* fetch the next token if received */ - buffer_descriptor_t *bd = (buffer_descriptor_t *)&_dcd.bda[s]; - endpoint_state_t *ep = &_dcd.endpoint_unified[s >> 3]; - unsigned odd = (s & USB_STAT_ODD_MASK) ? 1 : 0; +static void process_tokdne(uint8_t rhport) { + const unsigned s = USB_OTG_FS->STAT; + USB_OTG_FS->INT_STAT = USB_ISTAT_TOKDNE_MASK; /* fetch the next token if received */ + buffer_descriptor_t *bd = (buffer_descriptor_t *)&_dcd.bda[s]; + endpoint_state_t *ep = &_dcd.endpoint_unified[s >> 3]; + unsigned odd = (s & USB_STAT_ODD_MASK) ? 1 : 0; /* fetch pid before discarded by the next steps */ const unsigned pid = bd->tok_pid; @@ -155,7 +148,7 @@ static void process_tokdne(uint8_t rhport) bd->ninc = 0; bd->keep = 0; /* update the odd variable to prepare for the next transfer */ - ep->odd = odd ^ 1; + ep->odd = odd ^ 1; if (pid == TOK_PID_SETUP) { dcd_event_setup_received(rhport, bd->addr, true); USB_OTG_FS->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK; @@ -165,25 +158,24 @@ static void process_tokdne(uint8_t rhport) TU_LOG1("TKDNE %x\r\n", s); } - const unsigned bc = bd->bc; + const unsigned bc = bd->bc; const unsigned remaining = ep->remaining - bc; if (remaining && bc == ep->max_packet_size) { /* continue the transferring consecutive data */ - ep->remaining = remaining; + ep->remaining = remaining; const int next_remaining = remaining - ep->max_packet_size; if (next_remaining > 0) { /* prepare to the after next transfer */ bd->addr += ep->max_packet_size * 2; - bd->bc = next_remaining > ep->max_packet_size ? ep->max_packet_size: next_remaining; + bd->bc = next_remaining > ep->max_packet_size ? ep->max_packet_size : next_remaining; __DSB(); - bd->own = 1; /* the own bit must set after addr */ + bd->own = 1; /* the own bit must set after addr */ } return; } const unsigned length = ep->length; - dcd_event_xfer_complete(rhport, - ((s & USB_STAT_TX_MASK) << 4) | (s >> USB_STAT_ENDP_SHIFT), - length - remaining, XFER_RESULT_SUCCESS, true); + dcd_event_xfer_complete(rhport, ((s & USB_STAT_TX_MASK) << 4) | (s >> USB_STAT_ENDP_SHIFT), length - remaining, + XFER_RESULT_SUCCESS, true); if (0 == (s & USB_STAT_ENDP_MASK) && 0 == length) { /* After completion a ZLP of control transfer, * it prepares for the next steup transfer. */ @@ -191,24 +183,23 @@ static void process_tokdne(uint8_t rhport) /* When the transfer was the SetAddress, * the device address should be updated here. */ USB_OTG_FS->ADDR = _dcd.addr; - _dcd.addr = 0; + _dcd.addr = 0; } prepare_next_setup_packet(rhport); } } -static void process_bus_reset(uint8_t rhport) -{ - USB_OTG_FS->CTL |= USB_CTL_ODDRST_MASK; - USB_OTG_FS->ADDR = 0; - USB_OTG_FS->INT_ENB = (USB_OTG_FS->INT_ENB & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; +static void process_bus_reset(uint8_t rhport) { + USB_OTG_FS->CTL |= USB_CTL_ODDRST_MASK; + USB_OTG_FS->ADDR = 0; + USB_OTG_FS->INT_ENB = (USB_OTG_FS->INT_ENB & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; USB_OTG_FS->EP_CTL[0] = USB_ENDPT_EPHSHK_MASK | USB_ENDPT_EPRXEN_MASK | USB_ENDPT_EPTXEN_MASK; for (unsigned i = 1; i < 16; ++i) { USB_OTG_FS->EP_CTL[i] = 0; } buffer_descriptor_t *bd = _dcd.bdt[0][0]; - for (unsigned i = 0; i < sizeof(_dcd.bdt)/sizeof(*bd); ++i, ++bd) { + for (unsigned i = 0; i < sizeof(_dcd.bdt) / sizeof(*bd); ++i, ++bd) { bd->head = 0; } const endpoint_state_t ep0 = { @@ -226,31 +217,29 @@ static void process_bus_reset(uint8_t rhport) dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); } -static void process_bus_inactive(uint8_t rhport) -{ - (void) rhport; +static void process_bus_inactive(uint8_t rhport) { + (void)rhport; const unsigned inten = USB_OTG_FS->INT_ENB; - USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_SLEEPEN_MASK) | USB_INTEN_RESUMEEN_MASK; + USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_SLEEPEN_MASK) | USB_INTEN_RESUMEEN_MASK; dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); } -static void process_bus_active(uint8_t rhport) -{ - (void) rhport; +static void process_bus_active(uint8_t rhport) { + (void)rhport; const unsigned inten = USB_OTG_FS->INT_ENB; - USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; + USB_OTG_FS->INT_ENB = (inten & ~USB_INTEN_RESUMEEN_MASK) | USB_INTEN_SLEEPEN_MASK; dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); } /*------------------------------------------------------------------*/ /* Device API *------------------------------------------------------------------*/ -bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { - (void) rhport; - (void) rh_init; +bool dcd_init(uint8_t rhport, const tusb_rhport_init_t *rh_init) { + (void)rhport; + (void)rh_init; tu_memclr(&_dcd, sizeof(_dcd)); - USB_OTG_FS->BDT_PAGE_01 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); + USB_OTG_FS->BDT_PAGE_01 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); USB_OTG_FS->BDT_PAGE_02 = (uint8_t)((uintptr_t)_dcd.bdt >> 16); USB_OTG_FS->BDT_PAGE_03 = (uint8_t)((uintptr_t)_dcd.bdt >> 24); @@ -259,27 +248,24 @@ bool dcd_init(uint8_t rhport, const tusb_rhport_init_t* rh_init) { return true; } #define USB_DEVICE_INTERRUPT_PRIORITY (3U) -void dcd_int_enable(uint8_t rhport) -{ +void dcd_int_enable(uint8_t rhport) { uint8_t irqNumber; irqNumber = USB_FS_IRQn; - (void) rhport; - USB_OTG_FS->INT_ENB = USB_INTEN_USBRSTEN_MASK | USB_INTEN_TOKDNEEN_MASK | - USB_INTEN_SLEEPEN_MASK | USB_INTEN_ERROREN_MASK | USB_INTEN_STALLEN_MASK; + (void)rhport; + USB_OTG_FS->INT_ENB = USB_INTEN_USBRSTEN_MASK | USB_INTEN_TOKDNEEN_MASK | USB_INTEN_SLEEPEN_MASK | + USB_INTEN_ERROREN_MASK | USB_INTEN_STALLEN_MASK; NVIC_SetPriority((IRQn_Type)irqNumber, USB_DEVICE_INTERRUPT_PRIORITY); NVIC_EnableIRQ(USB_FS_IRQn); } -void dcd_int_disable(uint8_t rhport) -{ - (void) rhport; +void dcd_int_disable(uint8_t rhport) { + (void)rhport; NVIC_DisableIRQ(USB_FS_IRQn); USB_OTG_FS->INT_ENB = 0; } -void dcd_set_address(uint8_t rhport, uint8_t dev_addr) -{ - (void) rhport; +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + (void)rhport; _dcd.addr = dev_addr & 0x7F; /* Response with status first before changing device address */ dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); @@ -296,31 +282,29 @@ extern u32 SystemCoreClock; #pragma GCC diagnostic pop #endif -void dcd_remote_wakeup(uint8_t rhport) -{ - (void) rhport; +void dcd_remote_wakeup(uint8_t rhport) { + (void)rhport; unsigned cnt = SystemCoreClock / 100; USB_OTG_FS->CTL |= USB_CTL_RESUME_MASK; - while (cnt--) __NOP(); + while (cnt--) { + __NOP(); + } USB_OTG_FS->CTL &= ~USB_CTL_RESUME_MASK; } -void dcd_connect(uint8_t rhport) -{ - (void) rhport; - USB_OTG_FS->CTL |= USB_CTL_USBENSOFEN_MASK; +void dcd_connect(uint8_t rhport) { + (void)rhport; + USB_OTG_FS->CTL |= USB_CTL_USBENSOFEN_MASK; } -void dcd_disconnect(uint8_t rhport) -{ - (void) rhport; - USB_OTG_FS->CTL = 0; +void dcd_disconnect(uint8_t rhport) { + (void)rhport; + USB_OTG_FS->CTL = 0; } -void dcd_sof_enable(uint8_t rhport, bool en) -{ - (void) rhport; - (void) en; +void dcd_sof_enable(uint8_t rhport, bool en) { + (void)rhport; + (void)en; // TODO implement later } @@ -328,24 +312,23 @@ void dcd_sof_enable(uint8_t rhport, bool en) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; - - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - const unsigned xfer = ep_desc->bmAttributes.xfer; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - const unsigned odd = ep->odd; - buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + (void)rhport; + + const unsigned ep_addr = ep_desc->bEndpointAddress; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + const unsigned xfer = ep_desc->bmAttributes.xfer; + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + const unsigned odd = ep->odd; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; /* No support for control transfer */ TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL)); ep->max_packet_size = tu_edpt_packet_size(ep_desc); - unsigned val = USB_ENDPT_EPCTLDIS_MASK; - val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK: 0; + unsigned val = USB_ENDPT_EPCTLDIS_MASK; + val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK : 0; val |= dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; USB_OTG_FS->EP_CTL[epn] |= val; @@ -359,21 +342,19 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } -void dcd_edpt_close_all (uint8_t rhport) -{ - (void) rhport; +void dcd_edpt_close_all(uint8_t rhport) { + (void)rhport; // TODO implement dcd_edpt_close_all() } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; +void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; - const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][0]; + const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; USB_OTG_FS->EP_CTL[epn] &= ~msk; ep->max_packet_size = 0; ep->length = 0; @@ -381,14 +362,28 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) bd->head = 0; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) -{ - (void) rhport; + #if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + #endif + +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes) { + (void)rhport; NVIC_DisableIRQ(USB_FS_IRQn); - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][ep->odd]; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + buffer_descriptor_t *bd = &_dcd.bdt[epn][dir][ep->odd]; if (bd->own) { TU_LOG1("DCD XFER fail %x %d %lx %lx\r\n", ep_addr, total_bytes, ep->state, bd->head); @@ -399,42 +394,40 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to const unsigned mps = ep->max_packet_size; if (total_bytes > mps) { - buffer_descriptor_t *next = ep->odd ? bd - 1: bd + 1; + buffer_descriptor_t *next = ep->odd ? bd - 1 : bd + 1; /* When total_bytes is greater than the max packet size, * it prepares to the next transfer to avoid NAK in advance. */ - next->bc = total_bytes >= 2 * mps ? mps: total_bytes - mps; + next->bc = total_bytes >= 2 * mps ? mps : total_bytes - mps; next->addr = buffer + mps; next->own = 1; } - bd->bc = total_bytes >= mps ? mps: total_bytes; - bd->addr = buffer; + bd->bc = total_bytes >= mps ? mps : total_bytes; + bd->addr = buffer; __DSB(); - bd->own = 1; /* the own bit must set after addr */ + bd->own = 1; /* the own bit must set after addr */ NVIC_EnableIRQ(USB_FS_IRQn); return true; } -void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; +void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; const unsigned epn = ep_addr & 0xFu; if (0 == epn) { - USB_OTG_FS->EP_CTL[epn] |= USB_ENDPT_EPSTALL_MASK; + USB_OTG_FS->EP_CTL[epn] |= USB_ENDPT_EPSTALL_MASK; } else { - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; - bd[0].bdt_stall = 1; - bd[1].bdt_stall = 1; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; + bd[0].bdt_stall = 1; + bd[1].bdt_stall = 1; } } -void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; - const unsigned epn = ep_addr & 0xFu; - const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; - const unsigned odd = _dcd.endpoint[epn][dir].odd; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; +void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { + (void)rhport; + const unsigned epn = ep_addr & 0xFu; + const unsigned dir = (ep_addr & TUSB_DIR_IN_MASK) ? TUSB_DIR_IN : TUSB_DIR_OUT; + const unsigned odd = _dcd.endpoint[epn][dir].odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; bd[odd ^ 1].own = 0; bd[odd ^ 1].data = 1; @@ -447,19 +440,18 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) //--------------------------------------------------------------------+ // ISR //--------------------------------------------------------------------+ -void dcd_int_handler(uint8_t rhport) -{ - (void) rhport; +void dcd_int_handler(uint8_t rhport) { + (void)rhport; - uint32_t is = USB_OTG_FS->INT_STAT; - uint32_t msk = USB_OTG_FS->INT_ENB; + uint32_t is = USB_OTG_FS->INT_STAT; + uint32_t msk = USB_OTG_FS->INT_ENB; USB_OTG_FS->INT_STAT = is & ~msk; is &= msk; if (is & USB_ISTAT_ERROR_MASK) { /* TODO: */ - uint32_t es = USB_OTG_FS->ERR_STAT; + uint32_t es = USB_OTG_FS->ERR_STAT; USB_OTG_FS->ERR_STAT = es; - USB_OTG_FS->INT_STAT = is; /* discard any pending events */ + USB_OTG_FS->INT_STAT = is; /* discard any pending events */ return; } @@ -493,5 +485,4 @@ void dcd_int_handler(uint8_t rhport) return; } } - #endif diff --git a/src/portable/nordic/nrf5x/dcd_nrf5x.c b/src/portable/nordic/nrf5x/dcd_nrf5x.c index 9e5f5117f..730ca7fb1 100644 --- a/src/portable/nordic/nrf5x/dcd_nrf5x.c +++ b/src/portable/nordic/nrf5x/dcd_nrf5x.c @@ -426,6 +426,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { __DSB(); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; @@ -1062,5 +1077,4 @@ void tusb_hal_nrf_power_event(uint32_t event) { break; } } - #endif diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 3d5e195a9..da1c5c888 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -428,6 +428,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) if (ie) NVIC_EnableIRQ(USB0_IRQn); } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} + #endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; @@ -577,5 +592,4 @@ void dcd_int_handler(uint8_t rhport) process_tokdne(rhport); } } - #endif diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 855c59cd1..5516e1ba6 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -337,9 +337,17 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -600,5 +608,4 @@ void dcd_int_handler(uint8_t rhport) TU_BREAKPOINT(); } } - #endif diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 7c637ce0c..1c135f3be 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -432,6 +432,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) _dcd.ep[ep_id][0].cmd_sts.disable = _dcd.ep[ep_id][1].cmd_sts.disable = 1; } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} +#endif + static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset, uint16_t total_bytes) { uint16_t nbytes; ep_cmd_sts_t* ep_cs = get_ep_cs(ep_id); @@ -631,5 +646,4 @@ void dcd_int_handler(uint8_t rhport) // Endpoint transfer complete interrupt process_xfer_isr(rhport, int_status); } - #endif diff --git a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c index 60afbd435..25ef117c2 100644 --- a/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c @@ -113,6 +113,19 @@ void dcd_edpt_close_all (uint8_t rhport) (void) rhport; } +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { @@ -207,5 +220,4 @@ void __no_inline_not_in_flash_func(pio_usb_device_irq_handler)(uint8_t root_id) // clear all rport->ints &= ~ints; } - #endif diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index ecd28973c..2cc79aa74 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -859,6 +859,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) _dcd.ep[dir][epn] = 0; } +#if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} +#endif + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { rusb2_reg_t* rusb = RUSB2_REG(rhport); @@ -1028,5 +1043,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index f1f4897cb..8e6dc8c63 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -1082,6 +1082,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) musb_int_unmask(); } + #if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + #endif + // Submit a transfer, When complete dcd_event_xfer_complete() is invoked to notify the stack bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { @@ -1210,5 +1225,4 @@ void dcd_int_handler(uint8_t rhport) rxis &= ~TU_BIT(num); } } - #endif diff --git a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c index 64cbc5087..e4c28a56f 100644 --- a/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c +++ b/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c @@ -333,11 +333,20 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; } +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; +} + + void dcd_edpt_close_all (uint8_t rhport) { (void) rhport; @@ -821,5 +830,4 @@ void dcd_int_handler(uint8_t rhport) } } - #endif diff --git a/src/portable/valentyusb/eptri/dcd_eptri.c b/src/portable/valentyusb/eptri/dcd_eptri.c index a03c94558..f0e52ae47 100644 --- a/src/portable/valentyusb/eptri/dcd_eptri.c +++ b/src/portable/valentyusb/eptri/dcd_eptri.c @@ -438,9 +438,17 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) return true; } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void) rhport; (void) ep_addr; - // TODO implement dcd_edpt_close() +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void)rhport; + (void)ep_addr; + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } void dcd_edpt_close_all (uint8_t rhport) @@ -659,5 +667,4 @@ void dcd_int_handler(uint8_t rhport) } } } - #endif diff --git a/src/portable/wch/dcd_ch32_usbfs.c b/src/portable/wch/dcd_ch32_usbfs.c index c248ba14e..f8c3b05c3 100644 --- a/src/portable/wch/dcd_ch32_usbfs.c +++ b/src/portable/wch/dcd_ch32_usbfs.c @@ -283,12 +283,20 @@ void dcd_edpt_close_all(uint8_t rhport) { // TODO optional } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { (void) rhport; (void) ep_addr; - // TODO optional + (void)largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *desc_ep) { + (void)rhport; + (void)desc_ep; + return false; } + bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; uint8_t ep = tu_edpt_number(ep_addr); @@ -344,5 +352,4 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { } } } - #endif diff --git a/src/portable/wch/dcd_ch32_usbhs.c b/src/portable/wch/dcd_ch32_usbhs.c index 4a208b9df..36fdc89ef 100644 --- a/src/portable/wch/dcd_ch32_usbhs.c +++ b/src/portable/wch/dcd_ch32_usbhs.c @@ -27,13 +27,14 @@ #include "tusb_option.h" -#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && defined(CFG_TUD_WCH_USBIP_USBHS) && CFG_TUD_WCH_USBIP_USBHS -#include "ch32_usbhs_reg.h" +#if CFG_TUD_ENABLED && defined(TUP_USBIP_WCH_USBHS) && defined(CFG_TUD_WCH_USBIP_USBHS) && \ + (CFG_TUD_WCH_USBIP_USBHS == 1) + #include "ch32_usbhs_reg.h" -#include "device/dcd.h" + #include "device/dcd.h" -// Max number of bi-directional endpoints including EP0 -#define EP_MAX 16 + // Max number of bi-directional endpoints including EP0 + #define EP_MAX 16 typedef struct { uint8_t* buffer; @@ -288,6 +289,21 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { } } + #if 0 +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + (void) rhport; + (void) ep_addr; + (void) largest_packet_size; + return false; +} + +bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { + (void) rhport; + (void) desc_ep; + return false; +} + #endif + void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) { (void) rhport; @@ -419,5 +435,4 @@ void dcd_int_handler(uint8_t rhport) { USBHSD->INT_FG = USBHS_SUSPEND_FLAG; /* Clear flag */ } } - #endif -- cgit v1.3.1 From be9d1973ac4c30fedd24b8199fd4dee5c842e2ef Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 17 Nov 2025 17:45:38 +0700 Subject: make TUP_DCD_EDPT_ISO_ALLOC i.e dcd_edpt_iso_alloc()/dcd_edpt_iso_activate() as default driver implementation. dcd_edpt_close() is deprecated and will be removed from all driver in the future. --- examples/device/video_capture/skip.txt | 1 - examples/device/video_capture_2ch/skip.txt | 1 - hw/bsp/family_support.cmake | 3 + hw/bsp/mcx/boards/frdm_mcxa153/board.cmake | 9 +- hw/bsp/mcx/boards/frdm_mcxa153/board.mk | 8 + .../mcx/boards/frdm_mcxa153/board/clock_config.c | 559 ++++++++++++++++++++ .../mcx/boards/frdm_mcxa153/board/clock_config.h | 385 ++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c | 492 ++++++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h | 211 ++++++++ hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c | 466 ----------------- hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h | 170 ------ hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex | 573 +++++++++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c | 130 ----- hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h | 51 -- hw/bsp/mcx/family.c | 7 +- hw/bsp/mcx/family.mk | 13 +- src/common/tusb_mcu.h | 11 +- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 83 ++- src/portable/nxp/khci/dcd_khci.c | 78 ++- 19 files changed, 2313 insertions(+), 938 deletions(-) create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h (limited to 'src') diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index 50302c544..cb0c7d2e6 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,6 +1,5 @@ mcu:CH32V103 mcu:CH32V20X -mcu:MCXA15 mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index 0f6508226..af3b0de04 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -6,7 +6,6 @@ mcu:CH32V103 mcu:CH32V20X mcu:CH32V307 mcu:STM32L0 -mcu:MCXA15 family:espressif board:curiosity_nano board:kuiic diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 23dfb9d80..2b9612186 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -264,6 +264,9 @@ function(family_configure_common TARGET RTOS) ARCHIVE_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib SKIP_LINTING ON # need cmake 4.2 ) + if (CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_C_COMPILER_ID STREQUAL "Clang") + set_target_properties(${BOARD_TARGET} PROPERTIES COMPILE_OPTIONS -w) + endif () endif () target_link_libraries(${TARGET} PUBLIC ${BOARD_TARGET}) endif () diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake index 7cd8991e6..e6619992f 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake @@ -14,8 +14,11 @@ function(update_board TARGET) BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED CFG_EXAMPLE_VIDEO_READONLY ) - target_sources(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c + target_sources(${TARGET} PRIVATE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/clock_config.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/pin_mux.c + ) + target_include_directories(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board ) endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk index af8416d8e..34558b43e 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk @@ -6,6 +6,14 @@ CPU_CORE = cortex-m33-nodsp-nofp CFLAGS += \ -DCPU_MCXA153VLH \ -DCFG_TUSB_MCU=OPT_MCU_MCXA15 \ + -DCFG_EXAMPLE_VIDEO_READONLY + +SRC_C += \ + ${BOARD_PATH}/board/clock_config.c \ + ${BOARD_PATH}/board/pin_mux.c + +INC += \ + $(TOP)/$(BOARD_PATH)/board JLINK_DEVICE = MCXA153 PYOCD_TARGET = MCXA153 diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c new file mode 100644 index 000000000..599110d7a --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c @@ -0,0 +1,559 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to setup clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + * + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v18.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: FRDM-MCXA153 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_clock.h" +#include "clock_config.h" +#include "fsl_spc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +extern uint32_t SystemCoreClock; + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockFRO96M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CPU_clock.outFreq, value: 12 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: MAIN_clock.outFreq, value: 12 MHz} +- {id: Slow_clock.outFreq, value: 3 MHz} +- {id: System_clock.outFreq, value: 12 MHz} +- {id: TRACE_clock.outFreq, value: 12 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: SCGMode, value: SIRC} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SCG.SCSSEL.sel, value: SCG.SIRC} +- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO24M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 24 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 6 MHz} +- {id: System_clock.outFreq, value: 24 MHz} +- {id: TRACE_clock.outFreq, value: 24 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '2'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +void BOARD_BootClockFRO24M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO48M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 12 MHz} +- {id: System_clock.outFreq, value: 48 MHz} +- {id: TRACE_clock.outFreq, value: 48 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +void BOARD_BootClockFRO48M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO64M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 64 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} +- {id: FRO_HF_clock.outFreq, value: 64 MHz} +- {id: MAIN_clock.outFreq, value: 64 MHz} +- {id: Slow_clock.outFreq, value: 16 MHz} +- {id: System_clock.outFreq, value: 64 MHz} +- {id: TRACE_clock.outFreq, value: 64 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} +sources: +- {id: SCG.FIRC.outFreq, value: 64 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +void BOARD_BootClockFRO64M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO96M +called_from_default_init: true +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 96 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} +- {id: FRO_HF_clock.outFreq, value: 96 MHz} +- {id: MAIN_clock.outFreq, value: 96 MHz} +- {id: Slow_clock.outFreq, value: 24 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +- {id: TRACE_clock.outFreq, value: 96 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +sources: +- {id: SCG.FIRC.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +void BOARD_BootClockFRO96M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; +} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h new file mode 100644 index 000000000..d609eb468 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h @@ -0,0 +1,385 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO12M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO12M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO12M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO12M_CLK_48M_CLOCK 0UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO12M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO12M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO12M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO12M_CPU_CLOCK 12000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO12M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO12M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO12M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_FRO_HF_DIV_CLOCK 0UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_FRO_HF_CLOCK 0UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO12M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO12M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO12M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO12M_MAIN_CLOCK 12000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO12M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SLOW_CLOCK 3000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 12000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO12M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO24M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO24M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO24M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO24M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO24M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO24M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO24M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO24M_CPU_CLOCK 24000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO24M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO24M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO24M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO24M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO24M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO24M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO24M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO24M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_SLOW_CLOCK 6000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO24M_SYSTEM_CLOCK 24000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO24M_TRACE_CLOCK 24000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO24M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO24M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO24M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO24M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO48M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO48M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO48M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO48M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO48M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO48M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO48M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO48M_CPU_CLOCK 48000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO48M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO48M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO48M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO48M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO48M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO48M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO48M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO48M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_SLOW_CLOCK 12000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO48M_SYSTEM_CLOCK 48000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO48M_TRACE_CLOCK 48000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO48M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO48M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO48M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO48M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO64M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO64M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO64M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO64M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO64M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO64M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO64M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO64M_CPU_CLOCK 64000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO64M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO64M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO64M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_FRO_HF_DIV_CLOCK 64000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_FRO_HF_CLOCK 64000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO64M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO64M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO64M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO64M_MAIN_CLOCK 64000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO64M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_SLOW_CLOCK 16000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO64M_SYSTEM_CLOCK 64000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO64M_TRACE_CLOCK 64000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO64M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO64M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO64M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO64M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO96M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO96M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO96M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO96M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO96M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO96M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO96M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO96M_CPU_CLOCK 96000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO96M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO96M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO96M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_FRO_HF_DIV_CLOCK 96000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_FRO_HF_CLOCK 96000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO96M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO96M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO96M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO96M_MAIN_CLOCK 96000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO96M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_SLOW_CLOCK 24000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO96M_TRACE_CLOCK 96000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO96M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO96M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c new file mode 100644 index 000000000..58b0f47e9 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c @@ -0,0 +1,492 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: FRDM-MCXA153 +external_user_signals: {} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_port.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitDEBUG_UARTPins(); + BOARD_InitLEDsPins(); + BOARD_InitBUTTONsPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, + drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + + const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_RXD */ + .mux = kPORT_MuxAlt2, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_2 (pin 51) is configured as LPUART0_RXD */ + PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); + + const port_pin_config_t DEBUG_UART_TX = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_TXD */ + .mux = kPORT_MuxAlt2, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ + PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, &DEBUG_UART_TX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '50', peripheral: SWD, signal: SWCLK, pin_signal: P0_1/TCLK/SWCLK/LPUART0_CTS_B/LPSPI0_SDI/CT_INP1, slew_rate: fast, open_drain: disable, drive_strength: low, + pull_select: down, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '49', peripheral: SWD, signal: SWDIO, pin_signal: P0_0/TMS/SWDIO/LPUART0_RTS_B/LPSPI0_PCS0/CT_INP0, slew_rate: fast, open_drain: disable, drive_strength: high, + pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '51', peripheral: SWD, signal: SWO, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, + drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSWD_DEBUGPins(void) +{ + /* Write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + + const port_pin_config_t DEBUG_SWD_SWDIO = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWDIO */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_0 (pin 49) is configured as SWDIO */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, &DEBUG_SWD_SWDIO); + + const port_pin_config_t DEBUG_SWD_SWDCLK = {/* Internal pull-down resistor is enabled */ + .pullSelect = kPORT_PullDown, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWCLK */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_1 (pin 50) is configured as SWCLK */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, &DEBUG_SWD_SWDCLK); + + const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWO */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_2 (pin 51) is configured as SWO */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '37', peripheral: GPIO3, signal: 'GPIO, 13', pin_signal: P3_13/LPUART2_CTS_B/CT1_MAT3/PWM0_X1, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '46', peripheral: GPIO3, signal: 'GPIO, 0', pin_signal: P3_0/WUU0_IN22/TRIG_IN0/CT_INP16/PWM0_A0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitLEDsPins(void) +{ + /* Write to GPIO3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GateGPIO3); + /* Write to PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + gpio_pin_config_t LED_BLUE_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_0 (pin 46) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config); + + gpio_pin_config_t LED_RED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_12 (pin 38) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config); + + gpio_pin_config_t LED_GREEN_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_13 (pin 37) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config); + + /* PORT3_0 (pin 46) is configured as P3_0 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, kPORT_MuxAlt0); + + PORT3->PCR[0] = + ((PORT3->PCR[0] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_PFE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Passive Filter Enable: Disables. */ + | PORT_PCR_PFE(PCR_PFE_pfe0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); + + /* PORT3_12 (pin 38) is configured as P3_12 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, kPORT_MuxAlt0); + + PORT3->PCR[12] = + ((PORT3->PCR[12] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); + + /* PORT3_13 (pin 37) is configured as P3_13 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, kPORT_MuxAlt0); + + PORT3->PCR[13] = + ((PORT3->PCR[13] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitBUTTONsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '1', peripheral: GPIO1, signal: 'GPIO, 7', pin_signal: P1_7/WUU0_IN9/TRIG_OUT2/LPUART2_CTS_B/CT_INP7/ADC0_A23, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '8', peripheral: GPIO1, signal: 'GPIO, 29', pin_signal: P1_29/RESET_B/SPC_LPREQ, slew_rate: fast, open_drain: enable, drive_strength: low, pull_select: up, + pull_enable: enable, passive_filter: enable, pull_value: low, input_buffer: enable, invert_input: normal} + - {pin_num: '32', peripheral: GPIO3, signal: 'GPIO, 29', pin_signal: P3_29/WUU0_IN27/ISPMODE_N/CT_INP3/ADC0_A14, slew_rate: fast, open_drain: disable, drive_strength: low, + pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBUTTONsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitBUTTONsPins(void) +{ + /* Write to PORT1: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT1); + /* Write to PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO1 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO1_RST_SHIFT_RSTn); + /* PORT1 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT1_RST_SHIFT_RSTn); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + const port_pin_config_t SW1 = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is enabled */ + .passiveFilterEnable = kPORT_PassiveFilterEnable, + /* Open drain output is enabled */ + .openDrainEnable = kPORT_OpenDrainEnable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P1_29 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT1_29 (pin 8) is configured as P1_29 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW1_PORT, BOARD_INITBUTTONSPINS_SW1_PIN, &SW1); + + const port_pin_config_t SW3 = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P1_7 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT1_7 (pin 1) is configured as P1_7 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW3_PORT, BOARD_INITBUTTONSPINS_SW3_PIN, &SW3); + + const port_pin_config_t ISP = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P3_29 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT3_29 (pin 32) is configured as P3_29 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_ISP_PORT, BOARD_INITBUTTONSPINS_ISP_PIN, &ISP); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h new file mode 100644 index 000000000..4a42f266d --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h @@ -0,0 +1,211 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_3 (number 52), P0_3/J25[1]/J18[8] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 3U /*!<@brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 3U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/*! @name PORT0_1 (number 50), P0_1/SWCLK/JP10[2]/J18[4] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 1U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 1U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_0 (number 49), P0_0/SWDIO/J18[2] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); + +#define PCR_DSE_dse0 0x00u /*!<@brief Drive Strength Enable: Low */ +#define PCR_IBE_ibe1 0x01u /*!<@brief Input Buffer Enable: Enables */ +#define PCR_INV_inv0 0x00u /*!<@brief Invert Input: Does not invert */ +#define PCR_ODE_ode0 0x00u /*!<@brief Open Drain Enable: Disables */ +#define PCR_PE_pe0 0x00u /*!<@brief Pull Enable: Disables */ +#define PCR_PFE_pfe0 0x00u /*!<@brief Passive Filter Enable: Disables */ +#define PCR_PS_ps1 0x01u /*!<@brief Pull Select: Enables internal pullup resistor */ +#define PCR_SRE_sre0 0x00u /*!<@brief Slew Rate Enable: Fast */ + +/*! @name PORT3_13 (number 37), P3_13/J1[14] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN 13U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 13U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN 13U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_12 (number 38), P3_12/J1[12]/J5[1] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN 12U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 12U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_RED_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_PIN 12U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 12U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_0 (number 46), P3_0/J1[8] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN 0U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 0U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDsPins(void); + +/*! @name PORT1_7 (number 1), P1_7/J1[1] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN 7U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_SW3_PORT PORT1 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW3_PIN 7U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_SW3_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT1_29 (number 8), P1_29/J3[6]/J18[10] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN 29U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_SW1_PORT PORT1 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW1_PIN 29U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_SW1_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_29 (number 32), P3_29/J18[7]/J4[11] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN 29U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_ISP_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_ISP_PIN 29U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_ISP_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitBUTTONsPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c deleted file mode 100644 index 5a132dc67..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c +++ /dev/null @@ -1,466 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ -/* - * How to setup clock using clock driver functions: - * - * 1. Setup clock sources. - * - * 2. Set up wait states of the flash. - * - * 3. Set up all dividers. - * - * 4. Set up all selectors to provide selected clocks. - * - */ - -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!GlobalInfo -product: Clocks v12.0 -processor: MCXA153 -package_id: MCXA153VLH -mcu_data: ksdk2_0 -processor_version: 0.13.0 - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -#include "fsl_clock.h" -#include "clock_config.h" -#include "fsl_spc.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ - -/******************************************************************************* - * Variables - ******************************************************************************/ -/* System clock frequency. */ -//extern uint32_t SystemCoreClock; - -/******************************************************************************* - ************************ BOARD_InitBootClocks function ************************ - ******************************************************************************/ -void BOARD_InitBootClocks(void) -{ -} - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO12M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO12M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CPU_clock.outFreq, value: 12 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: MAIN_clock.outFreq, value: 12 MHz} -- {id: Slow_clock.outFreq, value: 3 MHz} -- {id: System_clock.outFreq, value: 12 MHz} -settings: -- {id: SCGMode, value: SIRC} -- {id: FRO_HF_PERIPHERALS_EN_CFG, value: Disabled} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SCG.SCSSEL.sel, value: SCG.SIRC} -- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -void BOARD_BootClockFRO12M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO24M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO24M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 24 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} -- {id: FRO_HF_clock.outFreq, value: 48 MHz} -- {id: MAIN_clock.outFreq, value: 48 MHz} -- {id: Slow_clock.outFreq, value: 6 MHz} -- {id: System_clock.outFreq, value: 24 MHz} -settings: -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -void BOARD_BootClockFRO24M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO48M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO48M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 48 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} -- {id: FRO_HF_clock.outFreq, value: 48 MHz} -- {id: MAIN_clock.outFreq, value: 48 MHz} -- {id: Slow_clock.outFreq, value: 12 MHz} -- {id: System_clock.outFreq, value: 48 MHz} -settings: -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -void BOARD_BootClockFRO48M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO64M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO64M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 64 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} -- {id: FRO_HF_clock.outFreq, value: 64 MHz} -- {id: MAIN_clock.outFreq, value: 64 MHz} -- {id: Slow_clock.outFreq, value: 16 MHz} -- {id: System_clock.outFreq, value: 64 MHz} -settings: -- {id: VDD_CORE, value: voltage_1v1} -- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} -sources: -- {id: SCG.FIRC.outFreq, value: 64 MHz} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -void BOARD_BootClockFRO64M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO96M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO96M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 96 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} -- {id: FRO_HF_clock.outFreq, value: 96 MHz} -- {id: MAIN_clock.outFreq, value: 96 MHz} -- {id: Slow_clock.outFreq, value: 24 MHz} -- {id: System_clock.outFreq, value: 96 MHz} -settings: -- {id: VDD_CORE, value: voltage_1v1} -- {id: CLKOUTDIV_HALT, value: Enable} -- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} -sources: -- {id: SCG.FIRC.outFreq, value: 96 MHz} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -void BOARD_BootClockFRO96M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; -} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h deleted file mode 100644 index aae811052..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -#ifndef _CLOCK_CONFIG_H_ -#define _CLOCK_CONFIG_H_ - -#include "fsl_common.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ - -/******************************************************************************* - ************************ BOARD_InitBootClocks function ************************ - ******************************************************************************/ - -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes default configuration of clocks. - * - */ -void BOARD_InitBootClocks(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO12M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO12M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO24M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO24M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO48M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO48M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO64M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO64M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO96M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO96M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex b/hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex new file mode 100644 index 000000000..43fea73db --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/frdm_mcxa153.mex @@ -0,0 +1,573 @@ + + + + MCXA153 + MCXA153VLH + FRDM-MCXA153 + ksdk2_0 + + + + + + + true + false + + /* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + + true + + true + true + false + + + + + + + + + 25.09.10 + + + + + + + Configures pin routing and optionally pin electrical features. + + true + cm33_core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + false + cm33_core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + cm33_core0 + true + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Configures pin routing and optionally pin electrical features. + + true + cm33_core0 + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + 25.09.10 + + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + + + false + + + + + + + + true + + + + + true + + + + + true + + + + + + + + + + + + + + + + + + + + + + + + + + + true + + + + + + + N/A + + + + + + + + + + 25.09.10 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + N/A + + + + diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c deleted file mode 100644 index 47709951b..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!GlobalInfo -product: Pins v14.0 -processor: MCXA153 -package_id: MCXA153VLH -mcu_data: ksdk2_0 -processor_version: 0.14.4 - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -#include "fsl_common.h" -#include "fsl_port.h" -#include "pin_mux.h" - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitBootPins - * Description : Calls initialization functions. - * - * END ****************************************************************************************************************/ -void BOARD_InitBootPins(void) -{ - BOARD_InitPins(); -} - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -BOARD_InitPins: -- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} -- pin_list: - - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, - drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} - - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1, slew_rate: fast, open_drain: disable, - drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitPins - * Description : Configures pin routing and optionally pin electrical features. - * - * END ****************************************************************************************************************/ -void BOARD_InitPins(void) -{ - CLOCK_EnableClock(kCLOCK_GateGPIO3); - /* Write to PORT3: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT3); - /* GPIO3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); - /* PORT3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); - - - /* Write to PORT0: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT0); - /* LPUART0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); - /* PORT0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); - - const port_pin_config_t port0_2_pin51_config = {/* Internal pull-up resistor is enabled */ - kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - kPORT_LowPullResistor, - /* Fast slew rate is configured */ - kPORT_FastSlewRate, - /* Passive input filter is disabled */ - kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - kPORT_NormalDriveStrength, - /* Pin is configured as LPUART0_RXD */ - kPORT_MuxAlt2, - /* Digital input enabled */ - kPORT_InputBufferEnable, - /* Digital input is not inverted */ - kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - kPORT_UnlockRegister}; - /* PORT0_2 (pin 51) is configured as LPUART0_RXD */ - PORT_SetPinConfig(PORT0, 2U, &port0_2_pin51_config); - - const port_pin_config_t port0_3_pin52_config = {/* Internal pull-up resistor is enabled */ - kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - kPORT_LowPullResistor, - /* Fast slew rate is configured */ - kPORT_FastSlewRate, - /* Passive input filter is disabled */ - kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - kPORT_NormalDriveStrength, - /* Pin is configured as LPUART0_TXD */ - kPORT_MuxAlt2, - /* Digital input enabled */ - kPORT_InputBufferEnable, - /* Digital input is not inverted */ - kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - kPORT_UnlockRegister}; - /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ - PORT_SetPinConfig(PORT0, 3U, &port0_3_pin52_config); -} -/*********************************************************************************************************************** - * EOF - **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h deleted file mode 100644 index 2c0e617a5..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2023 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -#ifndef _PIN_MUX_H_ -#define _PIN_MUX_H_ - -/*! - * @addtogroup pin_mux - * @{ - */ - -/*********************************************************************************************************************** - * API - **********************************************************************************************************************/ - -#if defined(__cplusplus) -extern "C" { -#endif - -/*! - * @brief Calls initialization functions. - * - */ -void BOARD_InitBootPins(void); - -/*! - * @brief Configures pin routing and optionally pin electrical features. - * - */ -void BOARD_InitPins(void); - -#if defined(__cplusplus) -} -#endif - -/*! - * @} - */ -#endif /* _PIN_MUX_H_ */ - -/*********************************************************************************************************************** - * EOF - **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c index 2dfefeb92..e1accf941 100644 --- a/hw/bsp/mcx/family.c +++ b/hw/bsp/mcx/family.c @@ -61,14 +61,9 @@ void USB0_IRQHandler(void) { void board_init(void) { - BOARD_InitPins(); - + BOARD_InitBootPins(); BOARD_InitBootClocks(); - #ifdef XTAL0_CLK_HZ - CLOCK_SetupExtClocking(XTAL0_CLK_HZ); - #endif - #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index a16f4b6c0..4321e654a 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -11,7 +11,7 @@ CFLAGS += \ -DBOARD_TUD_RHPORT=$(PORT) \ # mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration +CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration -Wno-error=redundant-decls LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs @@ -56,12 +56,9 @@ INC += \ $(TOP)/$(SDK_DIR)/drivers/ \ $(TOP)/$(SDK_DIR)/drivers/lpuart \ $(TOP)/$(SDK_DIR)/drivers/lpflexcomm \ - $(TOP)/$(SDK_DIR)/drivers/common\ - $(TOP)/$(SDK_DIR)/drivers/gpio\ - $(TOP)/$(SDK_DIR)/drivers/port\ - $(TOP)/hw/bsp/mcx/drivers/spc - - - + $(TOP)/$(SDK_DIR)/drivers/common\ + $(TOP)/$(SDK_DIR)/drivers/gpio\ + $(TOP)/$(SDK_DIR)/drivers/port\ + $(TOP)/hw/bsp/mcx/drivers/spc SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 05ae6929c..002cd3a0e 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -543,6 +543,10 @@ #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #if CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_EDPT_CLOSE_API + #endif + #elif TU_CHECK_MCU(OPT_MCU_CH32V103) #define TUP_USBIP_WCH_USBFS @@ -590,6 +594,10 @@ #define TUP_RHPORT_HIGHSPEED CFG_TUD_WCH_USBIP_USBHS #define TUP_DCD_ENDPOINT_MAX (CFG_TUD_WCH_USBIP_USBHS ? 16 : 8) + #if CFG_TUD_WCH_USBIP_USBHS + #define TUP_DCD_EDPT_CLOSE_API + #endif + //--------------------------------------------------------------------+ // Analog Devices //--------------------------------------------------------------------+ @@ -681,8 +689,7 @@ #define TU_ATTR_FAST_FUNC #endif -#if defined(TUP_USBIP_CHIPIDEA_FS) || defined(TUP_USBIP_IP3511) || defined(TUP_USBIP_RUSB2) || \ - (defined(TUP_USBIP_WCH_USBFS) && CFG_TUD_WCH_USBIP_USBFS) +#if defined(TUP_USBIP_IP3511) || defined(TUP_USBIP_RUSB2) #define TUP_DCD_EDPT_CLOSE_API #endif diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 8b5c42aa2..40ad4cf82 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -344,24 +344,21 @@ void dcd_sof_enable(uint8_t rhport, bool en) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; - - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned xfer = ep_desc->bmAttributes.xfer; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - const unsigned odd = ep->odd; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; +static bool edpt_open(uint8_t rhport, uint8_t ep_addr, uint16_t max_packet_size, tusb_xfer_type_t xfer) { + (void)rhport; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + const unsigned odd = ep->odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; /* No support for control transfer */ TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL)); - ep->max_packet_size = tu_edpt_packet_size(ep_desc); + ep->max_packet_size = max_packet_size; + unsigned val = USB_ENDPT_EPCTLDIS_MASK; - val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK: 0; + val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK : 0; val |= dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; CI_REG->EP[epn].CTL |= val; @@ -375,8 +372,27 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } -void dcd_edpt_close_all(uint8_t rhport) -{ +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + return edpt_open(rhport, ep_desc->bEndpointAddress, tu_edpt_packet_size(ep_desc), ep_desc->bmAttributes.xfer); +} + +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + return edpt_open(rhport, ep_addr, largest_packet_size, TUSB_XFER_ISOCHRONOUS); +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + const unsigned epn = tu_edpt_number(ep_desc->bEndpointAddress); + const unsigned dir = tu_edpt_dir(ep_desc->bEndpointAddress); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + + dcd_int_disable(rhport); + ep->max_packet_size = tu_edpt_packet_size(ep_desc); + dcd_int_enable(rhport); + + return true; +} + +void dcd_edpt_close_all(uint8_t rhport) { dcd_int_disable(rhport); for (unsigned i = 1; i < 16; ++i) { @@ -399,43 +415,6 @@ void dcd_edpt_close_all(uint8_t rhport) } } -#ifdef TUP_DCD_EDPT_CLOSE_API -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; - const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; - - dcd_int_disable(rhport); - - CI_REG->EP[epn].CTL &= ~msk; - ep->max_packet_size = 0; - ep->length = 0; - ep->remaining = 0; - bd[0].head = 0; - bd[1].head = 0; - - dcd_int_enable(rhport); -} - -#else - -bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { - (void) rhport; - (void) ep_addr; - (void) largest_packet_size; - return false; -} - -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { - (void) rhport; - (void) desc_ep; - return false; -} -#endif - bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { const unsigned epn = tu_edpt_number(ep_addr); diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index da1c5c888..9edaadf58 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -355,24 +355,21 @@ void dcd_sof_enable(uint8_t rhport, bool en) //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ -bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) -{ - (void) rhport; +static bool edpt_open(uint8_t rhport, uint8_t ep_addr, uint16_t max_packet_size, tusb_xfer_type_t xfer) { + (void)rhport; - const unsigned ep_addr = ep_desc->bEndpointAddress; - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - const unsigned xfer = ep_desc->bmAttributes.xfer; - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - const unsigned odd = ep->odd; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; + const unsigned epn = tu_edpt_number(ep_addr); + const unsigned dir = tu_edpt_dir(ep_addr); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + const unsigned odd = ep->odd; + buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; /* No support for control transfer */ TU_ASSERT(epn && (xfer != TUSB_XFER_CONTROL)); - ep->max_packet_size = tu_edpt_packet_size(ep_desc); - unsigned val = USB_ENDPT_EPCTLDIS_MASK; - val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK: 0; + ep->max_packet_size = max_packet_size; + unsigned val = USB_ENDPT_EPCTLDIS_MASK; + val |= (xfer != TUSB_XFER_ISOCHRONOUS) ? USB_ENDPT_EPHSHK_MASK : 0; val |= dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; KHCI->ENDPOINT[epn].ENDPT |= val; @@ -386,6 +383,26 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) return true; } +bool dcd_edpt_open(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + return edpt_open(rhport, ep_desc->bEndpointAddress, tu_edpt_packet_size(ep_desc), ep_desc->bmAttributes.xfer); +} + +bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { + return edpt_open(rhport, ep_addr, largest_packet_size, TUSB_XFER_ISOCHRONOUS); +} + +bool dcd_edpt_iso_activate(uint8_t rhport, const tusb_desc_endpoint_t *ep_desc) { + const unsigned epn = tu_edpt_number(ep_desc->bEndpointAddress); + const unsigned dir = tu_edpt_dir(ep_desc->bEndpointAddress); + endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; + + dcd_int_disable(rhport); + ep->max_packet_size = tu_edpt_packet_size(ep_desc); + dcd_int_enable(rhport); + + return true; +} + void dcd_edpt_close_all(uint8_t rhport) { (void) rhport; @@ -408,41 +425,6 @@ void dcd_edpt_close_all(uint8_t rhport) } } -void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) -{ - (void) rhport; - - const unsigned epn = tu_edpt_number(ep_addr); - const unsigned dir = tu_edpt_dir(ep_addr); - endpoint_state_t *ep = &_dcd.endpoint[epn][dir]; - buffer_descriptor_t *bd = _dcd.bdt[epn][dir]; - const unsigned msk = dir ? USB_ENDPT_EPTXEN_MASK : USB_ENDPT_EPRXEN_MASK; - const unsigned ie = NVIC_GetEnableIRQ(USB0_IRQn); - NVIC_DisableIRQ(USB0_IRQn); - KHCI->ENDPOINT[epn].ENDPT &= ~msk; - ep->max_packet_size = 0; - ep->length = 0; - ep->remaining = 0; - bd[0].head = 0; - bd[1].head = 0; - if (ie) NVIC_EnableIRQ(USB0_IRQn); -} - -#if 0 -bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) { - (void) rhport; - (void) ep_addr; - (void) largest_packet_size; - return false; -} - -bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep) { - (void) rhport; - (void) desc_ep; - return false; -} - #endif - bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { (void) rhport; -- cgit v1.3.1