From be54870c3b2f7f1c14b0f5527f4928c8a4a4a7ae Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Wed, 3 May 2023 10:02:24 +0200 Subject: renesas_ra: add support for HS port --- src/portable/renesas/rusb2/dcd_rusb2.c | 76 ++++++++++++++++++++++++++++------ src/portable/renesas/rusb2/hcd_rusb2.c | 46 ++++++++++++++------ src/portable/renesas/rusb2/rusb2_ra.c | 16 +++++++ src/portable/renesas/rusb2/rusb2_ra.h | 37 ++++++++++++++--- 4 files changed, 145 insertions(+), 30 deletions(-) create mode 100644 src/portable/renesas/rusb2/rusb2_ra.c (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 78584125f..9ae36e253 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -52,8 +52,10 @@ /* LINK core registers */ #if defined(__CCRX__) #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) +#elif (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) + #define RUSB2 ((R_USB_HS0_Type*)R_USB_HS0_BASE) #else - #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) + #define RUSB2 ((R_USB_FS0_Type*)R_USB_FS0_BASE) #endif /* Start of definition of packed structs (used by the CCRX toolchain) */ @@ -81,6 +83,18 @@ typedef union TU_ATTR_PACKED { volatile uint16_t u16; } hw_fifo_t; +typedef union TU_ATTR_PACKED { + struct { + volatile uint32_t : 24; + volatile uint32_t u8: 8; + }; + struct { + volatile uint32_t : 16; + volatile uint32_t u16: 16; + }; + volatile uint32_t u32; +} hw_fifo32_t; + typedef struct TU_ATTR_PACKED { void *buf; /* the start address of a transfer data buffer */ @@ -185,14 +199,18 @@ static inline void pipe_wait_for_ready(unsigned num) static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) { +#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) + volatile hw_fifo32_t *reg = (volatile hw_fifo32_t*) fifo; +#else volatile hw_fifo_t *reg = (volatile hw_fifo_t*) fifo; +#endif uintptr_t addr = (uintptr_t)buf; while (len >= 2) { reg->u16 = *(const uint16_t *)addr; addr += 2; len -= 2; } - if (len) { + if (len > 0) { reg->u8 = *(const uint8_t *)addr; ++addr; } @@ -519,12 +537,17 @@ static void process_bus_reset(uint8_t rhport) ++ctr; } tu_varclr(&_dcd); + +#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) + dcd_event_bus_reset(rhport, TUSB_SPEED_HIGH, true); +#else dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); +#endif } static void process_set_address(uint8_t rhport) { - const uint32_t addr = RUSB2->USBADDR_b.USBADDR; + const uint32_t addr = RUSB2->USBADDR & 0xFF; if (!addr) return; const tusb_control_request_t setup_packet = { #if defined(__CCRX__) @@ -572,34 +595,53 @@ void dcd_init(uint8_t rhport) { (void)rhport; -#if 0 // previously present in the rx driver before generalization - uint32_t pswi = disable_interrupt(); - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(USB0) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - enable_interrupt(pswi); -#endif - +#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) + RUSB2->SYSCFG_b.HSE = 1; + RUSB2->PHYSET_b.DIRPD = 0; + R_BSP_SoftwareDelay((uint32_t) 1, BSP_DELAY_UNITS_MILLISECONDS); + RUSB2->PHYSET_b.PLLRESET = 0; + //RUSB2->PHYSET_b.REPSTART = 1; + RUSB2->SYSCFG_b.DRPD = 0; + RUSB2->SYSCFG_b.USBE = 1; + RUSB2->LPSTS_b.SUSPENDM = 1; + while (!RUSB2->PLLSTA_b.PLLLOCK); + //RUSB2->BUSWAIT |= 0x0F00U; + //RUSB2->PHYSET_b.REPSEL = 1; + RUSB2->CFIFOSEL_b.MBW = 1; + RUSB2->D0FIFOSEL_b.MBW = 1; + RUSB2->D1FIFOSEL_b.MBW = 1; + RUSB2->INTSTS0 = 0; +#else RUSB2->SYSCFG_b.SCKE = 1; while (!RUSB2->SYSCFG_b.SCKE) ; RUSB2->SYSCFG_b.DRPD = 0; RUSB2->SYSCFG_b.DCFM = 0; RUSB2->SYSCFG_b.USBE = 1; +#endif // MCU specific PHY init rusb2_phy_init(); +#if (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) RUSB2->PHYSLEW = 0x5; RUSB2->DPUSR0R_FS_b.FIXPHY0 = 0u; /* USB_BASE Transceiver Output fixed */ + #define USB_VDCEN (0x0080U) /* b7: Regulator ON/OFF control */ + RUSB2->USBMC = (uint16_t) (RUSB2->USBMC | (USB_VDCEN)); +#endif + /* Setup default control pipe */ RUSB2->DCPMAXP_b.MXPS = 64; RUSB2->INTENB0 = RUSB2_INTSTS0_VBINT_Msk | RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_BEMP_Msk | RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_CTRT_Msk | (USE_SOF ? RUSB2_INTSTS0_SOFR_Msk : 0) | - RUSB2_INTSTS0_RESM_Msk; + RUSB2_INTSTS0_RESM_Msk | RUSB2_INTSTS0_NRDY_Msk; RUSB2->BEMPENB = 1; RUSB2->BRDYENB = 1; +#if (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) + RUSB2->SYSCFG_b.DPRPU = 1; /* necessary in this position */ +#endif + if (RUSB2->INTSTS0_b.VBSTS) { dcd_connect(rhport); } @@ -630,6 +672,10 @@ void dcd_remote_wakeup(uint8_t rhport) void dcd_connect(uint8_t rhport) { (void)rhport; + #if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) + RUSB2->SYSCFG_b.CNEN = 1; + R_BSP_SoftwareDelay((uint32_t) 10, BSP_DELAY_UNITS_MILLISECONDS); + #endif RUSB2->SYSCFG_b.DPRPU = 1; } @@ -672,6 +718,9 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) /* setup pipe */ dcd_int_disable(rhport); + #if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) + RUSB2->PIPEBUF = 0x7C08; + #endif RUSB2->PIPESEL = num; RUSB2->PIPEMAXP = mps; volatile uint16_t *ctr = get_pipectr(num); @@ -826,6 +875,9 @@ void dcd_int_handler(uint8_t rhport) break; } } + if (is0 & RUSB2_INTSTS0_NRDY_Msk) { + RUSB2->NRDYSTS = 0; + } if (is0 & RUSB2_INTSTS0_CTRT_Msk) { if (is0 & RUSB2_INTSTS0_CTSQ_CTRL_RDATA) { /* A setup packet has been received. */ diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index e4743223e..03811d63f 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -48,8 +48,10 @@ /* LINK core registers */ #if defined(__CCRX__) #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) +#elif (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) + #define RUSB2 ((R_USB_HS0_Type*) R_USB_HS0_BASE) #else - #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) + #define RUSB2 ((R_USB_FS0_Type*) R_USB_FS0_BASE) #endif TU_ATTR_PACKED_BEGIN @@ -477,31 +479,49 @@ bool hcd_init(uint8_t rhport) { (void)rhport; -#if 0 // previously present in the rx driver before generalization - uint32_t pswi = disable_interrupt(); - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY | SYSTEM_PRCR_PRC1; - MSTP(USB0) = 0; - SYSTEM.PRCR.WORD = SYSTEM_PRCR_PRKEY; - enable_interrupt(pswi); -#endif - - RUSB2->SYSCFG_b.SCKE = 1; - while (!RUSB2->SYSCFG_b.SCKE) ; - RUSB2->SYSCFG_b.DPRPU = 0; - RUSB2->SYSCFG_b.DRPD = 0; +#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) + RUSB2->SYSCFG_b.HSE = 1; + RUSB2->PHYSET_b.HSEB = 0; + RUSB2->PHYSET_b.DIRPD = 0; + R_BSP_SoftwareDelay((uint32_t) 1, BSP_DELAY_UNITS_MILLISECONDS); + RUSB2->PHYSET_b.PLLRESET = 0; + RUSB2->LPSTS_b.SUSPENDM = 1; + while (!RUSB2->PLLSTA_b.PLLLOCK); + RUSB2->SYSCFG_b.DRPD = 1; RUSB2->SYSCFG_b.DCFM = 1; + RUSB2->SYSCFG_b.DPRPU = 0; + RUSB2->SYSCFG_b.CNEN = 1; + RUSB2->BUSWAIT |= 0x0F00U; + RUSB2->SOFCFG_b.INTL = 1; + RUSB2->DVSTCTR0_b.VBUSEN = 1; + RUSB2->CFIFOSEL_b.MBW = 1; + RUSB2->D0FIFOSEL_b.MBW = 1; + RUSB2->D1FIFOSEL_b.MBW = 1; + RUSB2->INTSTS0 = 0; + for (volatile int i = 0; i < 30000; ++i) ; + RUSB2->SYSCFG_b.USBE = 1; +#else + /* HOST DEVICE Full SPEED */ + RUSB2->SYSCFG_b.SCKE = 1; /* USB Clock enable */ + while (!RUSB2->SYSCFG_b.SCKE) ; + RUSB2->SYSCFG_b.DPRPU = 0; /* D+ pull up enable - 0/disable in host mode */ + RUSB2->SYSCFG_b.DRPD = 1; /* D+/D- pull down - 1/in Host mode (pag.834)*/ + RUSB2->SYSCFG_b.DCFM = 1; /* HOST or Device - 1/HOST */ RUSB2->DVSTCTR0_b.VBUSEN = 1; RUSB2->SYSCFG_b.DRPD = 1; for (volatile int i = 0; i < 30000; ++i) ; RUSB2->SYSCFG_b.USBE = 1; +#endif // MCU specific PHY init rusb2_phy_init(); +#if (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) RUSB2->PHYSLEW = 0x5; RUSB2->DPUSR0R_FS_b.FIXPHY0 = 0u; /* Transceiver Output fixed */ +#endif /* Setup default control pipe */ RUSB2->DCPCFG = RUSB2_PIPECFG_SHTNAK_Msk; diff --git a/src/portable/renesas/rusb2/rusb2_ra.c b/src/portable/renesas/rusb2/rusb2_ra.c new file mode 100644 index 000000000..2b6ce7b2f --- /dev/null +++ b/src/portable/renesas/rusb2/rusb2_ra.c @@ -0,0 +1,16 @@ +#include "tusb_option.h" +#include "rusb2_ra.h" + +#ifdef CFG_TUSB_RHPORT0_MODE +IRQn_Type _usb_fs_irqn = USBFS_INT_IRQn; +void tud_set_irq_usbfs(IRQn_Type q) { + _usb_fs_irqn = q; +} +#endif + +#ifdef CFG_TUSB_RHPORT1_MODE +IRQn_Type _usb_hs_irqn = USBHS_USB_INT_RESUME_IRQn; +void tud_set_irq_usbhs(IRQn_Type q) { + _usb_hs_irqn = q; +} +#endif \ No newline at end of file diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 5785850cc..b18b506e5 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -34,18 +34,45 @@ extern "C" { /* renesas fsp api */ #include "bsp_api.h" -#define RUSB2_REG_BASE (0x40090000) +extern IRQn_Type _usb_fs_irqn; +extern IRQn_Type _usb_hs_irqn; TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) { - (void) rhport; - NVIC_EnableIRQ(TU_IRQn); +#ifdef CFG_TUSB_RHPORT1_MODE +#if (CFG_TUSB_RHPORT1_MODE != 0) + if (rhport == 1) { + NVIC_EnableIRQ(_usb_hs_irqn); + } +#endif +#endif + +#ifdef CFG_TUSB_RHPORT0_MODE +#if (CFG_TUSB_RHPORT0_MODE != 0) + if (rhport == 0) { + NVIC_EnableIRQ(_usb_fs_irqn); + } +#endif +#endif } TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_disable(uint8_t rhport) { - (void) rhport; - NVIC_DisableIRQ(TU_IRQn); +#ifdef CFG_TUSB_RHPORT1_MODE +#if (CFG_TUSB_RHPORT1_MODE != 0) + if (rhport == 1) { + NVIC_DisableIRQ(_usb_hs_irqn); + } +#endif +#endif + +#ifdef CFG_TUSB_RHPORT0_MODE +#if (CFG_TUSB_RHPORT0_MODE != 0) + if (rhport == 0) { + NVIC_DisableIRQ(_usb_fs_irqn); + } +#endif +#endif } // MCU specific PHY init -- cgit v1.3.1 From 4afed62646d18dd96eef619d7d21b47a2422672f Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Wed, 3 May 2023 10:05:29 +0200 Subject: renesas_ra: host: handle retry on attach() --- src/portable/renesas/rusb2/hcd_rusb2.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 03811d63f..9dd4f0a48 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -759,9 +759,10 @@ void hcd_int_handler(uint8_t rhport) 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, 20, 8, 19, 18}; #endif - + static unsigned char attach_attempt = 0; unsigned is1 = RUSB2->INTSTS1; unsigned is0 = RUSB2->INTSTS0; + /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ RUSB2->INTSTS1 = ~((RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk) & is1); RUSB2->INTSTS0 = ~((RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk) & is0); @@ -772,12 +773,21 @@ void hcd_int_handler(uint8_t rhport) if (is1 & RUSB2_INTSTS1_SACK_Msk) { /* Set DATA1 in advance for the next transfer. */ RUSB2->DCPCTR_b.SQSET = 1; + attach_attempt = 0; hcd_event_xfer_complete(RUSB2->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_SUCCESS, true); } if (is1 & RUSB2_INTSTS1_SIGN_Msk) { hcd_event_xfer_complete(RUSB2->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_FAILED, true); + if(attach_attempt > 0) { + RUSB2->DVSTCTR0_b.UACT = 1; + _hcd.need_reset = true; + RUSB2->INTENB1 = (RUSB2->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; + hcd_event_device_attach(rhport, true); + } + attach_attempt--; } if (is1 & RUSB2_INTSTS1_ATTCH_Msk) { + attach_attempt = 10; RUSB2->DVSTCTR0_b.UACT = 1; _hcd.need_reset = true; RUSB2->INTENB1 = (RUSB2->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; -- cgit v1.3.1 From 5f7e7b4b0a9f65a401c679d5045b96b4b56755df Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Wed, 3 May 2023 10:06:13 +0200 Subject: renesas_ra: support RA2A1 (FS only) --- src/portable/renesas/rusb2/dcd_rusb2.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 9ae36e253..f3bda5205 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -41,6 +41,15 @@ #include "rusb2_rx.h" #elif TU_CHECK_MCU(OPT_MCU_RAXXX) #include "rusb2_ra.h" + #if defined(RENESAS_CORTEX_M23) + #define D0FIFO CFIFO + #define D0FIFOSEL CFIFOSEL + #define D0FIFOSEL_b CFIFOSEL_b + #define D1FIFOSEL CFIFOSEL + #define D1FIFOSEL_b CFIFOSEL_b + #define D0FIFOCTR CFIFOCTR + #define D0FIFOCTR_b CFIFOCTR_b + #endif #else #error "Unsupported MCU" #endif @@ -121,6 +130,10 @@ typedef struct //--------------------------------------------------------------------+ static dcd_data_t _dcd; +#ifndef FIRST_BULK_PIPE +#define FIRST_BULK_PIPE 3 +#endif + static unsigned find_pipe(unsigned xfer) { switch (xfer) { @@ -130,7 +143,7 @@ static unsigned find_pipe(unsigned xfer) } break; case TUSB_XFER_BULK: - for (int i = 3; i <= 5; ++i) { + for (int i = FIRST_BULK_PIPE; i <= 5; ++i) { if (0 == _dcd.pipe[i].ep) return i; } for (int i = 1; i <= 1; ++i) { -- cgit v1.3.1 From 6ff62c0fe85e825d077d7d803c657181769e542f Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Wed, 3 May 2023 11:47:41 +0200 Subject: renesas: add fallback for targets not defining CFG_TUSB_RHPORT*_MODE --- src/portable/renesas/rusb2/dcd_rusb2.c | 5 +++++ src/portable/renesas/rusb2/hcd_rusb2.c | 5 +++++ src/portable/renesas/rusb2/rusb2_ra.h | 5 +++++ 3 files changed, 15 insertions(+) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index f3bda5205..f509dcc56 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -37,6 +37,11 @@ #include "device/dcd.h" #include "rusb2_type.h" +#if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) +// fallback +#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE +#endif + #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) #include "rusb2_rx.h" #elif TU_CHECK_MCU(OPT_MCU_RAXXX) diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 9dd4f0a48..1ec25f1e2 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -33,6 +33,11 @@ #include "host/hcd.h" #include "rusb2_type.h" +#if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) +// fallback +#define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST +#endif + #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) #include "rusb2_rx.h" #elif TU_CHECK_MCU(OPT_MCU_RAXXX) diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index b18b506e5..874492304 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -37,6 +37,11 @@ extern "C" { extern IRQn_Type _usb_fs_irqn; extern IRQn_Type _usb_hs_irqn; +#if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) +// fallback +#define CFG_TUSB_RHPORT0_MODE ( CFG_TUD_ENABLED ? OPT_MODE_DEVICE : OPT_MODE_HOST ) +#endif + TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) { #ifdef CFG_TUSB_RHPORT1_MODE -- cgit v1.3.1 From 32f9f452afc4d431d51cb16a02f99d76c88f7fb9 Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Wed, 17 May 2023 12:13:25 +0200 Subject: renesas: provide default for CFG_TUSB_RHPORT1_MODE Should fix CI failure for Renesas RX family --- src/portable/renesas/rusb2/dcd_rusb2.c | 1 + src/portable/renesas/rusb2/hcd_rusb2.c | 1 + src/portable/renesas/rusb2/rusb2_ra.h | 1 + 3 files changed, 3 insertions(+) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index f509dcc56..2653d0da6 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -40,6 +40,7 @@ #if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) // fallback #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE +#define CFG_TUSB_RHPORT1_MODE 0 #endif #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 1ec25f1e2..1e26c931d 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -36,6 +36,7 @@ #if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) // fallback #define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST +#define CFG_TUSB_RHPORT1_MODE 0 #endif #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 874492304..a1c58abe5 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -40,6 +40,7 @@ extern IRQn_Type _usb_hs_irqn; #if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) // fallback #define CFG_TUSB_RHPORT0_MODE ( CFG_TUD_ENABLED ? OPT_MODE_DEVICE : OPT_MODE_HOST ) +#define CFG_TUSB_RHPORT1_MODE 0 #endif TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) -- cgit v1.3.1 From e8b7f21af6e5e994ece7c989202767732f23809e Mon Sep 17 00:00:00 2001 From: Dave Nadler Date: Thu, 1 Jun 2023 12:57:44 -0400 Subject: For FreeRTOS kernel-aware debugging, when queue registry is enabled, label tinyUSB queue --- src/osal/osal_freertos.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'src') diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 477f64892..0b1b11589 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -169,11 +169,16 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { -#if configSUPPORT_STATIC_ALLOCATION - return xQueueCreateStatic(qdef->depth, qdef->item_sz, (uint8_t*) qdef->buf, &qdef->sq); -#else - return xQueueCreate(qdef->depth, qdef->item_sz); -#endif + osal_queue_t q; + #if configSUPPORT_STATIC_ALLOCATION + q = xQueueCreateStatic(qdef->depth, qdef->item_sz, (uint8_t*) qdef->buf, &qdef->sq); + #else + q = xQueueCreate(qdef->depth, qdef->item_sz); + #endif + #if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) + vQueueAddToRegistry(q, "tinyUSB"); + #endif + return q; } TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) -- cgit v1.3.1 From cdae66c8371e1c73d28279462fa8598a9daae5a7 Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Mon, 5 Jun 2023 09:04:52 +0200 Subject: renesas_rx: fix compilation on latest GCC __CCRX__ only applyes to version 4 of RX family compiler http://tool-support.renesas.com/autoupdate/support/onlinehelp/csp/V4.01.00/CS+.chm/Compiler-CCRX.chm/Output/ccrx04c0201y.html __RX__ is one of the macros exported by latest gcc (gcc_8.3.0.202305_rx_elf) --- src/portable/renesas/rusb2/dcd_rusb2.c | 2 ++ src/portable/renesas/rusb2/hcd_rusb2.c | 2 ++ 2 files changed, 4 insertions(+) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 2653d0da6..e9ac46517 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -67,6 +67,8 @@ /* LINK core registers */ #if defined(__CCRX__) #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) +#elif defined(__RX__) + #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) #elif (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) #define RUSB2 ((R_USB_HS0_Type*)R_USB_HS0_BASE) #else diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 1e26c931d..b97ffd7e9 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -54,6 +54,8 @@ /* LINK core registers */ #if defined(__CCRX__) #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) +#elif defined(__RX__) + #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) #elif (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) #define RUSB2 ((R_USB_HS0_Type*) R_USB_HS0_BASE) #else -- cgit v1.3.1 From 2b735ee8f5476168d6b5ed1dc32edc52f4d3648a Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Mon, 5 Jun 2023 09:31:58 +0200 Subject: renesas_ra: fix wrong ifdef Since CFG_TUSB_RHPORT1_MODE is always defined now for backwards compatibility --- src/portable/renesas/rusb2/rusb2_ra.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/rusb2_ra.c b/src/portable/renesas/rusb2/rusb2_ra.c index 2b6ce7b2f..ff2191b1f 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.c +++ b/src/portable/renesas/rusb2/rusb2_ra.c @@ -1,16 +1,16 @@ #include "tusb_option.h" #include "rusb2_ra.h" -#ifdef CFG_TUSB_RHPORT0_MODE +#if (CFG_TUSB_RHPORT0_MODE != 0) IRQn_Type _usb_fs_irqn = USBFS_INT_IRQn; void tud_set_irq_usbfs(IRQn_Type q) { _usb_fs_irqn = q; } #endif -#ifdef CFG_TUSB_RHPORT1_MODE +#if (CFG_TUSB_RHPORT1_MODE != 0) IRQn_Type _usb_hs_irqn = USBHS_USB_INT_RESUME_IRQn; void tud_set_irq_usbhs(IRQn_Type q) { _usb_hs_irqn = q; } -#endif \ No newline at end of file +#endif -- cgit v1.3.1 From 11fba59319d81fb9502fbf399abb4fe27cf3fa29 Mon Sep 17 00:00:00 2001 From: Dave Nadler Date: Wed, 28 Jun 2023 17:25:22 -0400 Subject: Name queues for easier FreeRTOS debugging with task- and queue-aware debuggers --- src/device/usbd.c | 4 ++-- src/host/usbh.c | 4 ++-- src/osal/osal_freertos.h | 5 +++-- 3 files changed, 7 insertions(+), 6 deletions(-) (limited to 'src') diff --git a/src/device/usbd.c b/src/device/usbd.c index 44c2530ce..b6c679b22 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -279,7 +279,7 @@ tu_static uint8_t _usbd_rhport = RHPORT_INVALID; // Event queue // usbd_int_set() is used as mutex in OS NONE config -OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); +OSAL_QUEUE_DEF(usbd_int_set, usbd_events, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); tu_static osal_queue_t _usbd_q; // Mutex for claiming endpoint @@ -410,7 +410,7 @@ bool tud_init (uint8_t rhport) #endif // Init device queue & task - _usbd_q = osal_queue_create(&_usbd_qdef); + _usbd_q = osal_queue_create(&usbd_events); TU_ASSERT(_usbd_q); // Get application driver if available diff --git a/src/host/usbh.c b/src/host/usbh.c index f3e9d3858..987ff7a6e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -219,7 +219,7 @@ static usbh_device_t _usbh_devices[TOTAL_DEVICES]; // Event queue // usbh_int_set is used as mutex in OS NONE config -OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); +OSAL_QUEUE_DEF(usbh_int_set, usbh_events, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; CFG_TUH_MEM_SECTION CFG_TUH_MEM_ALIGN @@ -330,7 +330,7 @@ bool tuh_init(uint8_t controller_id) TU_LOG_INT(USBH_DEBUG, sizeof(tu_edpt_stream_t)); // Event queue - _usbh_q = osal_queue_create( &_usbh_qdef ); + _usbh_q = osal_queue_create( &usbh_events ); TU_ASSERT(_usbh_q != NULL); #if OSAL_MUTEX_REQUIRED diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 0b1b11589..e83277eb3 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -56,7 +56,7 @@ typedef SemaphoreHandle_t osal_mutex_t; // _int_set is not used with an RTOS #define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ static _type _name##_##buf[_depth];\ - osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf }; + osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, .pQueueName = #_name }; typedef struct { @@ -66,6 +66,7 @@ typedef struct #if configSUPPORT_STATIC_ALLOCATION StaticQueue_t sq; #endif + const char* pQueueName; }osal_queue_def_t; typedef QueueHandle_t osal_queue_t; @@ -176,7 +177,7 @@ TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_de q = xQueueCreate(qdef->depth, qdef->item_sz); #endif #if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) - vQueueAddToRegistry(q, "tinyUSB"); + vQueueAddToRegistry(q, qdef->pQueueName); #endif return q; } -- cgit v1.3.1 From 0693462ebad20338de78aeb93d60d6c3c73a6ca7 Mon Sep 17 00:00:00 2001 From: Lars Pötter Date: Sun, 2 Jul 2023 09:02:24 +0200 Subject: made line ends consistent. --- src/class/cdc/cdc_host.c | 4 ++-- src/class/video/video_device.c | 16 +++++++------- src/common/tusb_fifo.c | 2 +- src/portable/dialog/da146xx/dcd_da146xx.c | 2 +- src/portable/mentor/musb/dcd_musb.c | 30 +++++++++++++------------- src/portable/mentor/musb/hcd_musb.c | 8 +++---- src/portable/nxp/khci/hcd_khci.c | 16 +++++++------- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 4 ++-- src/portable/raspberrypi/rp2040/rp2040_usb.c | 4 ++-- src/portable/renesas/rusb2/hcd_rusb2.c | 8 +++---- src/portable/st/typec/typec_stm32.c | 18 ++++++++-------- src/portable/sunxi/dcd_sunxi_musb.c | 32 ++++++++++++++-------------- 12 files changed, 72 insertions(+), 72 deletions(-) (limited to 'src') diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index ce9f27c33..e1af8d801 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -973,7 +973,7 @@ static uint32_t ftdi_232bm_baud_to_divisor(uint32_t baud) static bool ftdi_sio_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { uint16_t const divisor = (uint16_t) ftdi_232bm_baud_to_divisor(baudrate); - TU_LOG_DRV("CDC FTDI Set BaudRate = %lu, divisor = 0x%04x\n", baudrate, divisor); + TU_LOG_DRV("CDC FTDI Set BaudRate = %lu, divisor = 0x%04x\r\n", baudrate, divisor); p_cdc->user_control_cb = complete_cb; _ftdi_requested_baud = baudrate; @@ -1108,7 +1108,7 @@ static bool cp210x_ifc_enable(cdch_interface_t* p_cdc, uint16_t enabled, tuh_xfe } static bool cp210x_set_baudrate(cdch_interface_t* p_cdc, uint32_t baudrate, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { - TU_LOG_DRV("CDC CP210x Set BaudRate = %lu\n", baudrate); + TU_LOG_DRV("CDC CP210x Set BaudRate = %lu\r\n", baudrate); uint32_t baud_le = tu_htole32(baudrate); p_cdc->user_control_cb = complete_cb; return cp210x_set_request(p_cdc, CP210X_SET_BAUDRATE, 0, (uint8_t *) &baud_le, 4, diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 91f452afc..16eae0ced 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -609,17 +609,17 @@ static bool _close_vc_itf(uint8_t rhport, videod_interface_t *self) * @param[in] altnum The target alternate setting number. */ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t altnum) { - TU_LOG2(" open VC %d\n", altnum); + TU_LOG2(" open VC %d\r\n", altnum); uint8_t const *beg = self->beg; uint8_t const *end = beg + self->len; /* The first descriptor is a video control interface descriptor. */ uint8_t const *cur = _find_desc_itf(beg, end, _desc_itfnum(beg), altnum); - TU_LOG2(" cur %d\n", cur - beg); + TU_LOG2(" cur %d\r\n", cur - beg); TU_VERIFY(cur < end); tusb_desc_vc_itf_t const *vc = (tusb_desc_vc_itf_t const *)cur; - TU_LOG2(" bInCollection %d\n", vc->ctl.bInCollection); + TU_LOG2(" bInCollection %d\r\n", vc->ctl.bInCollection); /* Support for up to 2 streaming interfaces only. */ TU_ASSERT(vc->ctl.bInCollection <= CFG_TUD_VIDEO_STREAMING); @@ -628,7 +628,7 @@ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t /* Advance to the next descriptor after the class-specific VC interface header descriptor. */ cur += vc->std.bLength + vc->ctl.bLength; - TU_LOG2(" bNumEndpoints %d\n", vc->std.bNumEndpoints); + TU_LOG2(" bNumEndpoints %d\r\n", vc->std.bNumEndpoints); /* Open the notification endpoint if it exist. */ if (vc->std.bNumEndpoints) { /* Support for 1 endpoint only. */ @@ -662,7 +662,7 @@ static bool _init_vs_configuration(videod_streaming_interface_t *stm) static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint_fast8_t altnum) { uint_fast8_t i; - TU_LOG2(" reopen VS %d\n", altnum); + TU_LOG2(" reopen VS %d\r\n", altnum); uint8_t const *desc = _videod_itf[stm->index_vc].beg; /* Close endpoints of previous settings. */ @@ -672,7 +672,7 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint uint8_t ep_adr = _desc_ep_addr(desc + ofs_ep); usbd_edpt_close(rhport, ep_adr); stm->desc.ep[i] = 0; - TU_LOG2(" close EP%02x\n", ep_adr); + TU_LOG2(" close EP%02x\r\n", ep_adr); } /* clear transfer management information */ @@ -709,12 +709,12 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint } TU_ASSERT(usbd_edpt_open(rhport, ep)); stm->desc.ep[i] = (uint16_t) (cur - desc); - TU_LOG2(" open EP%02x\n", _desc_ep_addr(cur)); + TU_LOG2(" open EP%02x\r\n", _desc_ep_addr(cur)); } if (altnum) { stm->state = VS_STATE_STREAMING; } - TU_LOG2(" done\n"); + TU_LOG2(" done\r\n"); return true; } diff --git a/src/common/tusb_fifo.c b/src/common/tusb_fifo.c index a52c92267..d6c3db4ce 100644 --- a/src/common/tusb_fifo.c +++ b/src/common/tusb_fifo.c @@ -539,7 +539,7 @@ static uint16_t _tu_fifo_write_n(tu_fifo_t* f, const void * data, uint16_t n, tu // Advance index f->wr_idx = advance_index(f->depth, wr_idx, n); - TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\n", f->wr_idx); + TU_LOG(TU_FIFO_DBG, "\tnew_wr = %u\r\n", f->wr_idx); } _ff_unlock(f->mutex_wr); diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c index 961da81d6..d1e85c2df 100644 --- a/src/portable/dialog/da146xx/dcd_da146xx.c +++ b/src/portable/dialog/da146xx/dcd_da146xx.c @@ -651,7 +651,7 @@ static void handle_epx_tx_ev(xfer_ctl_t *xfer) } if (txs & USB_USB_TXS1_REG_USB_TX_URUN_Msk) { - TU_LOG1("EP %d FIFO underrun\n", epnum); + TU_LOG1("EP %d FIFO underrun\r\n", epnum); } // Start next or repeated packet. start_tx_packet(xfer); diff --git a/src/portable/mentor/musb/dcd_musb.c b/src/portable/mentor/musb/dcd_musb.c index 487761847..3c0114e41 100644 --- a/src/portable/mentor/musb/dcd_musb.c +++ b/src/portable/mentor/musb/dcd_musb.c @@ -317,7 +317,7 @@ static bool handle_xfer_in(uint_fast8_t ep_addr) const unsigned mps = regs->TXMAXP; const unsigned len = TU_MIN(mps, rem); void *buf = pipe->buf; - // TU_LOG1(" %p mps %d len %d rem %d\n", buf, mps, len, rem); + // TU_LOG1(" %p mps %d len %d rem %d\r\n", buf, mps, len, rem); if (len) { if (_dcd.pipe_buf_is_fifo[TUSB_DIR_IN] & TU_BIT(epnum_minus1)) { pipe_read_write_packet_ff(buf, &USB0->FIFO1_WORD + epnum_minus1, len, TUSB_DIR_IN); @@ -328,7 +328,7 @@ static bool handle_xfer_in(uint_fast8_t ep_addr) pipe->remaining = rem - len; } regs->TXCSRL = USB_TXCSRL1_TXRDY; - // TU_LOG1(" TXCSRL%d = %x %d\n", epnum_minus1 + 1, regs->TXCSRL, rem - len); + // TU_LOG1(" TXCSRL%d = %x %d\r\n", epnum_minus1 + 1, regs->TXCSRL, rem - len); return false; } @@ -337,7 +337,7 @@ static bool handle_xfer_out(uint_fast8_t ep_addr) unsigned epnum_minus1 = tu_edpt_number(ep_addr) - 1; pipe_state_t *pipe = &_dcd.pipe[tu_edpt_dir(ep_addr)][epnum_minus1]; volatile hw_endpoint_t *regs = edpt_regs(epnum_minus1); - // TU_LOG1(" RXCSRL%d = %x\n", epnum_minus1 + 1, regs->RXCSRL); + // TU_LOG1(" RXCSRL%d = %x\r\n", epnum_minus1 + 1, regs->RXCSRL); TU_ASSERT(regs->RXCSRL & USB_RXCSRL1_RXRDY); @@ -399,14 +399,14 @@ static bool edpt0_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_ * may have already finished and received the next setup packet * without calling this function, so we have no choice but to * invoke the callback function of status packet here. */ - // TU_LOG1(" STATUS OUT USB0->CSRL0 = %x\n", USB0->CSRL0); + // TU_LOG1(" STATUS OUT USB0->CSRL0 = %x\r\n", USB0->CSRL0); _dcd.status_out = 0; if (req == REQUEST_TYPE_INVALID) { dcd_event_xfer_complete(rhport, ep_addr, total_bytes, XFER_RESULT_SUCCESS, false); } else { /* The next setup packet has already been received, it aborts * invoking callback function to avoid confusing TUSB stack. */ - TU_LOG1("Drop CONTROL_STAGE_ACK\n"); + TU_LOG1("Drop CONTROL_STAGE_ACK\r\n"); } return true; } @@ -431,16 +431,16 @@ static bool edpt0_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_ } else { USB0->CSRL0 = USB_CSRL0_TXRDY; /* Flush TX FIFO to return ACK. */ } - // TU_LOG1(" IN USB0->CSRL0 = %x\n", USB0->CSRL0); + // TU_LOG1(" IN USB0->CSRL0 = %x\r\n", USB0->CSRL0); } else { - // TU_LOG1(" OUT USB0->CSRL0 = %x\n", USB0->CSRL0); + // TU_LOG1(" OUT USB0->CSRL0 = %x\r\n", USB0->CSRL0); _dcd.pipe0.buf = buffer; _dcd.pipe0.length = len; _dcd.pipe0.remaining = len; USB0->CSRL0 = USB_CSRL0_RXRDYC; /* Clear RX FIFO to return ACK. */ } } else if (dir_in) { - // TU_LOG1(" STATUS IN USB0->CSRL0 = %x\n", USB0->CSRL0); + // TU_LOG1(" STATUS IN USB0->CSRL0 = %x\r\n", USB0->CSRL0); _dcd.pipe0.buf = NULL; _dcd.pipe0.length = 0; _dcd.pipe0.remaining = 0; @@ -454,7 +454,7 @@ static void process_ep0(uint8_t rhport) { uint_fast8_t csrl = USB0->CSRL0; - // TU_LOG1(" EP0 USB0->CSRL0 = %x\n", csrl); + // TU_LOG1(" EP0 USB0->CSRL0 = %x\r\n", csrl); if (csrl & USB_CSRL0_STALLED) { /* Returned STALL packet to HOST. */ @@ -464,7 +464,7 @@ static void process_ep0(uint8_t rhport) unsigned req = _dcd.setup_packet.bmRequestType; if (csrl & USB_CSRL0_SETEND) { - TU_LOG1(" ABORT by the next packets\n"); + TU_LOG1(" ABORT by the next packets\r\n"); USB0->CSRL0 = USB_CSRL0_SETENDC; if (req != REQUEST_TYPE_INVALID && _dcd.pipe0.buf) { /* DATA stage was aborted by receiving STATUS or SETUP packet. */ @@ -539,14 +539,14 @@ static void process_edpt_n(uint8_t rhport, uint_fast8_t ep_addr) volatile hw_endpoint_t *regs = edpt_regs(epn_minus1); if (dir_in) { - // TU_LOG1(" TXCSRL%d = %x\n", epn_minus1 + 1, regs->TXCSRL); + // TU_LOG1(" TXCSRL%d = %x\r\n", epn_minus1 + 1, regs->TXCSRL); if (regs->TXCSRL & USB_TXCSRL1_STALLED) { regs->TXCSRL &= ~(USB_TXCSRL1_STALLED | USB_TXCSRL1_UNDRN); return; } completed = handle_xfer_in(ep_addr); } else { - // TU_LOG1(" RXCSRL%d = %x\n", epn_minus1 + 1, regs->RXCSRL); + // TU_LOG1(" RXCSRL%d = %x\r\n", epn_minus1 + 1, regs->RXCSRL); if (regs->RXCSRL & USB_RXCSRL1_STALLED) { regs->RXCSRL &= ~(USB_RXCSRL1_STALLED | USB_RXCSRL1_OVER); return; @@ -789,7 +789,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t { (void)rhport; bool ret; - // TU_LOG1("X %x %d\n", ep_addr, total_bytes); + // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); unsigned const epnum = tu_edpt_number(ep_addr); unsigned const ie = NVIC_GetEnableIRQ(USB0_IRQn); NVIC_DisableIRQ(USB0_IRQn); @@ -807,7 +807,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_ { (void)rhport; bool ret; - // TU_LOG1("X %x %d\n", ep_addr, total_bytes); + // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); unsigned const epnum = tu_edpt_number(ep_addr); TU_ASSERT(epnum); unsigned const ie = NVIC_GetEnableIRQ(USB0_IRQn); @@ -869,7 +869,7 @@ void dcd_int_handler(uint8_t rhport) is = USB0->IS; /* read and clear interrupt status */ txis = USB0->TXIS; /* read and clear interrupt status */ rxis = USB0->RXIS; /* read and clear interrupt status */ - // TU_LOG1("D%2x T%2x R%2x\n", is, txis, rxis); + // TU_LOG1("D%2x T%2x R%2x\r\n", is, txis, rxis); is &= USB0->IE; /* Clear disabled interrupts */ if (is & USB_IS_DISCON) { diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 9eb2e005e..7e67b8291 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -418,7 +418,7 @@ static void process_ep0(uint8_t rhport) (void)rhport; uint_fast8_t csrl = USB0->CSRL0; - // TU_LOG1(" EP0 CSRL = %x\n", csrl); + // TU_LOG1(" EP0 CSRL = %x\r\n", csrl); unsigned const dev_addr = USB0->TXFUNCADDR0; unsigned const req = _hcd.bmRequestType; @@ -508,7 +508,7 @@ static void process_pipe_tx(uint8_t rhport, uint_fast8_t pipenum) volatile hw_endpoint_t *regs = edpt_regs(pipenum - 1); unsigned const csrl = regs->TXCSRL; - // TU_LOG1(" TXCSRL%d = %x\n", pipenum, csrl); + // TU_LOG1(" TXCSRL%d = %x\r\n", pipenum, csrl); if (csrl & (USB_TXCSRL1_STALLED | USB_TXCSRL1_ERROR)) { if (csrl & USB_TXCSRL1_TXRDY) regs->TXCSRL = (csrl & ~(USB_TXCSRL1_STALLED | USB_TXCSRL1_ERROR)) | USB_TXCSRL1_FLUSH; @@ -537,7 +537,7 @@ static void process_pipe_rx(uint8_t rhport, uint_fast8_t pipenum) volatile hw_endpoint_t *regs = edpt_regs(pipenum - 1); unsigned const csrl = regs->RXCSRL; - // TU_LOG1(" RXCSRL%d = %x\n", pipenum, csrl); + // TU_LOG1(" RXCSRL%d = %x\r\n", pipenum, csrl); if (csrl & (USB_RXCSRL1_STALLED | USB_RXCSRL1_ERROR)) { if (csrl & USB_RXCSRL1_RXRDY) regs->RXCSRL = (csrl & ~(USB_RXCSRL1_STALLED | USB_RXCSRL1_ERROR)) | USB_RXCSRL1_FLUSH; @@ -846,7 +846,7 @@ void hcd_int_handler(uint8_t rhport) is = USB0->IS; /* read and clear interrupt status */ txis = USB0->TXIS; /* read and clear interrupt status */ rxis = USB0->RXIS; /* read and clear interrupt status */ - // TU_LOG1("D%2x T%2x R%2x\n", is, txis, rxis); + // TU_LOG1("D%2x T%2x R%2x\r\n", is, txis, rxis); is &= USB0->IE; /* Clear disabled interrupts */ if (is & USB_IS_RESUME) { diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index f6029ee0d..fb978cac8 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -161,7 +161,7 @@ static int prepare_packets(int pipenum) buffer_descriptor_t *bd = _hcd.bdt[dir_tx]; TU_ASSERT(0 == bd[odd].own, -1); - // TU_LOG1(" %p dir %d odd %d data %d\n", &bd[odd], dir_tx, odd, pipe->data); + // TU_LOG1(" %p dir %d odd %d data %d\r\n", &bd[odd], dir_tx, odd, pipe->data); ep->pipenum = pipenum; @@ -251,7 +251,7 @@ static bool resume_transfer(int pipenum) flags |= USB_ENDPT_EPHSHK_MASK | USB_ENDPT_EPCTLDIS_MASK | USB_ENDPT_RETRYDIS_MASK; break; } - // TU_LOG1(" resume pipenum %d flags %x\n", pipenum, flags); + // TU_LOG1(" resume pipenum %d flags %x\r\n", pipenum, flags); KHCI->ENDPOINT[0].ENDPT = flags; KHCI->ADDR = (KHCI->ADDR & USB_ADDR_LSEN_MASK) | pipe->dev_addr; @@ -302,7 +302,7 @@ static void process_tokdne(uint8_t rhport) int pipenum = ep->pipenum; int next_pipenum; - // TU_LOG1("TOKDNE %x PID %x pipe %d\n", s, pid, pipenum); + // TU_LOG1("TOKDNE %x PID %x pipe %d\r\n", s, pid, pipenum); xfer_result_t result; switch (pid) { @@ -479,7 +479,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void)rhport; - // TU_LOG1("SETUP %u\n", dev_addr); + // TU_LOG1("SETUP %u\r\n", dev_addr); TU_ASSERT(0 == (_hcd.in_progress & TU_BIT(0))); int pipenum = find_pipe(dev_addr, 0); @@ -510,7 +510,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const { (void)rhport; uint8_t const ep_addr = ep_desc->bEndpointAddress; - // TU_LOG1("O %u %x\n", dev_addr, ep_addr); + // TU_LOG1("O %u %x\r\n", dev_addr, ep_addr); /* Find a free pipe */ pipe_state_t *p = &_hcd.pipe[0]; pipe_state_t *end = &_hcd.pipe[CFG_TUH_ENDPOINT_MAX * 2]; @@ -543,7 +543,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { (void)rhport; - // TU_LOG1("X %u %x %x %d\n", dev_addr, ep_addr, (uintptr_t)buffer, buflen); + // TU_LOG1("X %u %x %x %d\r\n", dev_addr, ep_addr, (uintptr_t)buffer, buflen); int pipenum = find_pipe(dev_addr, ep_addr); TU_ASSERT(0 <= pipenum); @@ -580,7 +580,7 @@ void hcd_int_handler(uint8_t rhport) uint32_t is = KHCI->ISTAT; uint32_t msk = KHCI->INTEN; - // TU_LOG1("S %lx\n", is); + // TU_LOG1("S %lx\r\n", is); /* clear disabled interrupts */ KHCI->ISTAT = (is & ~msk & ~USB_ISTAT_TOKDNE_MASK) | USB_ISTAT_SOFTOK_MASK; @@ -589,7 +589,7 @@ void hcd_int_handler(uint8_t rhport) if (is & USB_ISTAT_ERROR_MASK) { unsigned err = KHCI->ERRSTAT; if (err) { - TU_LOG1(" ERR %x\n", err); + TU_LOG1(" ERR %x\r\n", err); KHCI->ERRSTAT = err; } else { KHCI->INTEN &= ~USB_ISTAT_ERROR_MASK; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 02f9968a7..51b8bf72d 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -219,7 +219,7 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) if ( status & USB_INTS_BUFF_STATUS_BITS ) { handled |= USB_INTS_BUFF_STATUS_BITS; - TU_LOG(2, "Buffer complete\n"); + TU_LOG(2, "Buffer complete\r\n"); hw_handle_buff_status(); } @@ -227,7 +227,7 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) { handled |= USB_INTS_TRANS_COMPLETE_BITS; usb_hw_clear->sie_status = USB_SIE_STATUS_TRANS_COMPLETE_BITS; - TU_LOG(2, "Transfer complete\n"); + TU_LOG(2, "Transfer complete\r\n"); hw_trans_complete(); } diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 1f49665ff..53486a586 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -219,7 +219,7 @@ void hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, uint16_t to if ( ep->active ) { // TODO: Is this acceptable for interrupt packets? - TU_LOG(1, "WARN: starting new transfer on already active ep %d %s\n", tu_edpt_number(ep->ep_addr), + TU_LOG(1, "WARN: starting new transfer on already active ep %d %s\r\n", tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]); hw_endpoint_reset_transfer(ep); @@ -419,7 +419,7 @@ static bool __tusb_irq_path_func(e15_is_critical_frame_period) (struct hw_endpoi if (delta < 800 || delta > 998) { return false; } - TU_LOG(3, "Avoiding sof %lu now %lu last %lu\n", (usb_hw->sof_rd + 1) & USB_SOF_RD_BITS, time_us_32(), e15_last_sof); + TU_LOG(3, "Avoiding sof %lu now %lu last %lu\r\n", (usb_hw->sof_rd + 1) & USB_SOF_RD_BITS, time_us_32(), e15_last_sof); return true; } diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 0e6fa1618..886a6f6b8 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -409,7 +409,7 @@ static void process_pipe_nrdy(uint8_t rhport, unsigned num) (void)rhport; xfer_result_t result; uint16_t volatile *ctr = get_pipectr(num); - // TU_LOG1("NRDY %d %x\n", num, *ctr); + // TU_LOG1("NRDY %d %x\r\n", num, *ctr); switch (*ctr & RUSB2_PIPE_CTR_PID_Msk) { default: return; case RUSB2_PIPE_CTR_PID_STALL: result = XFER_RESULT_STALLED; break; @@ -608,7 +608,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void)rhport; - // TU_LOG1("S %d %x\n", dev_addr, RUSB2->DCPCTR); + // TU_LOG1("S %d %x\r\n", dev_addr, RUSB2->DCPCTR); TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ TU_ASSERT(0 == RUSB2->DCPCTR_b.SUREQ); @@ -701,7 +701,7 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b { bool r; hcd_int_disable(rhport); - // TU_LOG1("X %d %x %u\n", dev_addr, ep_addr, buflen); + // TU_LOG1("X %d %x %u\r\n", dev_addr, ep_addr, buflen); r = process_edpt_xfer(dev_addr, ep_addr, buffer, buflen); hcd_int_enable(rhport); return r; @@ -745,7 +745,7 @@ void hcd_int_handler(uint8_t rhport) /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ RUSB2->INTSTS1 = ~((RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk) & is1); RUSB2->INTSTS0 = ~((RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk) & is0); - // TU_LOG1("IS %04x %04x\n", is0, is1); + // TU_LOG1("IS %04x %04x\r\n", is0, is1); is1 &= RUSB2->INTENB1; is0 &= RUSB2->INTENB0; diff --git a/src/portable/st/typec/typec_stm32.c b/src/portable/st/typec/typec_stm32.c index bf8b660f0..8da2e39ba 100644 --- a/src/portable/st/typec/typec_stm32.c +++ b/src/portable/st/typec/typec_stm32.c @@ -246,7 +246,7 @@ void tcd_int_handler(uint8_t rhport) { v_cc[0] = (UCPD1->SR >> UCPD_SR_TYPEC_VSTATE_CC1_Pos) & 0x03; v_cc[1] = (UCPD1->SR >> UCPD_SR_TYPEC_VSTATE_CC2_Pos) & 0x03; - TU_LOG3("VState CC1 = %lu, CC2 = %lu\n", v_cc[0], v_cc[1]); + TU_LOG3("VState CC1 = %lu, CC2 = %lu\r\n", v_cc[0], v_cc[1]); uint32_t cr = UCPD1->CR; @@ -255,15 +255,15 @@ void tcd_int_handler(uint8_t rhport) { // FIXME somehow CC2 is vstate is not correct, always 1 even not attached. // on DPOW1 board, it is connected to PA10 (USBPD_DBCC2), we probably miss something. if ((sr & UCPD_SR_TYPECEVT1) && (v_cc[0] == 3)) { - TU_LOG3("Attach CC1\n"); + TU_LOG3("Attach CC1\r\n"); cr &= ~(UCPD_CR_PHYCCSEL | UCPD_CR_CCENABLE); cr |= UCPD_CR_PHYRXEN | UCPD_CR_CCENABLE_0; } else if ((sr & UCPD_SR_TYPECEVT2) && (v_cc[1] == 3)) { - TU_LOG3("Attach CC2\n"); + TU_LOG3("Attach CC2\r\n"); cr &= ~UCPD_CR_CCENABLE; cr |= (UCPD_CR_PHYCCSEL | UCPD_CR_PHYRXEN | UCPD_CR_CCENABLE_1); } else { - TU_LOG3("Detach\n"); + TU_LOG3("Detach\r\n"); cr &= ~UCPD_CR_PHYRXEN; cr |= UCPD_CR_CCENABLE_0 | UCPD_CR_CCENABLE_1; } @@ -290,7 +290,7 @@ void tcd_int_handler(uint8_t rhport) { //------------- RX -------------// if (sr & UCPD_SR_RXORDDET) { // SOP: Start of Packet. - TU_LOG3("SOP\n"); + TU_LOG3("SOP\r\n"); // UCPD1->RX_ORDSET & UCPD_RX_ORDSET_RXORDSET_Msk; // ack @@ -299,7 +299,7 @@ void tcd_int_handler(uint8_t rhport) { // Received full message if (sr & UCPD_SR_RXMSGEND) { - TU_LOG3("RX MSG END\n"); + TU_LOG3("RX MSG END\r\n"); // stop TX dma_stop(rhport, true); @@ -328,7 +328,7 @@ void tcd_int_handler(uint8_t rhport) { } if (sr & UCPD_SR_RXOVR) { - TU_LOG3("RXOVR\n"); + TU_LOG3("RXOVR\r\n"); // ack UCPD1->ICR = UCPD_ICR_RXOVRCF; } @@ -343,12 +343,12 @@ void tcd_int_handler(uint8_t rhport) { uint8_t result; if ( sr & UCPD_SR_TXMSGSENT ) { - TU_LOG3("TX MSG SENT\n"); + TU_LOG3("TX MSG SENT\r\n"); result = XFER_RESULT_SUCCESS; // ack UCPD1->ICR = UCPD_ICR_TXMSGSENTCF; }else { - TU_LOG3("TX Error\n"); + TU_LOG3("TX Error\r\n"); result = XFER_RESULT_FAILED; // ack UCPD1->ICR = UCPD_SR_TXMSGDISC | UCPD_SR_TXMSGABT | UCPD_SR_TXUND; diff --git a/src/portable/sunxi/dcd_sunxi_musb.c b/src/portable/sunxi/dcd_sunxi_musb.c index e26be775d..6cc1975a8 100644 --- a/src/portable/sunxi/dcd_sunxi_musb.c +++ b/src/portable/sunxi/dcd_sunxi_musb.c @@ -408,9 +408,9 @@ static inline unsigned free_block_size(free_block_t const *blk) #if 0 static inline void print_block_list(free_block_t const *blk, unsigned num) { - TU_LOG1("*************\n"); + TU_LOG1("*************\r\n"); for (unsigned i = 0; i < num; ++i) { - TU_LOG1(" Blk%u %u %u\n", i, blk->beg, blk->end); + TU_LOG1(" Blk%u %u %u\r\n", i, blk->beg, blk->end); ++blk; } } @@ -590,7 +590,7 @@ static bool handle_xfer_in(uint_fast8_t ep_addr) const unsigned mps = USBC_Readw(USBC_REG_TXMAXP(USBC0_BASE)); const unsigned len = TU_MIN(mps, rem); uint8_t *buf = pipe->buf; - // TU_LOG1(" %p mps %d len %d rem %d\n", buf, mps, len, rem); + // TU_LOG1(" %p mps %d len %d rem %d\r\n", buf, mps, len, rem); if (len) { volatile void* addr = (volatile void*)(USBC_REG_EPFIFO1(USBC0_BASE) + (epnum_minus1 << 2)); if (_dcd.pipe_buf_is_fifo[TUSB_DIR_IN] & TU_BIT(epnum_minus1)) { @@ -602,7 +602,7 @@ static bool handle_xfer_in(uint_fast8_t ep_addr) pipe->remaining = rem - len; } __USBC_Dev_Tx_WriteDataComplete(); - // TU_LOG1(" TXCSRL%d = %x %d\n", epnum_minus1 + 1, regs->TXCSRL, rem - len); + // TU_LOG1(" TXCSRL%d = %x %d\r\n", epnum_minus1 + 1, regs->TXCSRL, rem - len); return false; } @@ -610,7 +610,7 @@ static bool handle_xfer_out(uint_fast8_t ep_addr) { unsigned epnum_minus1 = tu_edpt_number(ep_addr) - 1; pipe_state_t *pipe = &_dcd.pipe[tu_edpt_dir(ep_addr)][epnum_minus1]; - // TU_LOG1(" RXCSRL%d = %x\n", epnum_minus1 + 1, regs->RXCSRL); + // TU_LOG1(" RXCSRL%d = %x\r\n", epnum_minus1 + 1, regs->RXCSRL); TU_ASSERT(__USBC_Dev_Rx_IsReadDataReady()); @@ -677,14 +677,14 @@ static bool edpt0_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_ * may have already finished and received the next setup packet * without calling this function, so we have no choice but to * invoke the callback function of status packet here. */ - // TU_LOG1(" STATUS OUT CSRL0 = %x\n", CSRL0); + // TU_LOG1(" STATUS OUT CSRL0 = %x\r\n", CSRL0); _dcd.status_out = 0; if (req == REQUEST_TYPE_INVALID) { dcd_event_xfer_complete(rhport, ep_addr, total_bytes, XFER_RESULT_SUCCESS, false); } else { /* The next setup packet has already been received, it aborts * invoking callback function to avoid confusing TUSB stack. */ - TU_LOG1("Drop CONTROL_STAGE_ACK\n"); + TU_LOG1("Drop CONTROL_STAGE_ACK\r\n"); } return true; } @@ -709,16 +709,16 @@ static bool edpt0_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_ } else { __USBC_Dev_ep0_WriteDataHalf(); } - // TU_LOG1(" IN CSRL0 = %x\n", CSRL0); + // TU_LOG1(" IN CSRL0 = %x\r\n", CSRL0); } else { - // TU_LOG1(" OUT CSRL0 = %x\n", CSRL0); + // TU_LOG1(" OUT CSRL0 = %x\r\n", CSRL0); _dcd.pipe0.buf = buffer; _dcd.pipe0.length = len; _dcd.pipe0.remaining = len; __USBC_Dev_ep0_ReadDataHalf(); } } else if (dir_in) { - // TU_LOG1(" STATUS IN CSRL0 = %x\n", CSRL0); + // TU_LOG1(" STATUS IN CSRL0 = %x\r\n", CSRL0); _dcd.pipe0.buf = NULL; _dcd.pipe0.length = 0; _dcd.pipe0.remaining = 0; @@ -733,7 +733,7 @@ static void process_ep0(uint8_t rhport) USBC_SelectActiveEp(0); uint_fast8_t csrl = USBC_Readw(USBC_REG_CSR0(USBC0_BASE)); - // TU_LOG1(" EP0 CSRL0 = %x\n", csrl); + // TU_LOG1(" EP0 CSRL0 = %x\r\n", csrl); if (csrl & USB_CSRL0_STALLED) { /* Returned STALL packet to HOST. */ @@ -743,7 +743,7 @@ static void process_ep0(uint8_t rhport) unsigned req = _dcd.setup_packet.bmRequestType; if (csrl & USB_CSRL0_SETEND) { - // TU_LOG1(" ABORT by the next packets\n"); + // TU_LOG1(" ABORT by the next packets\r\n"); USBC_Dev_Ctrl_ClearSetupEnd(); if (req != REQUEST_TYPE_INVALID && _dcd.pipe0.buf) { /* DATA stage was aborted by receiving STATUS or SETUP packet. */ @@ -819,14 +819,14 @@ static void process_edpt_n(uint8_t rhport, uint_fast8_t ep_addr) USBC_SelectActiveEp(epn); if (dir_in) { - // TU_LOG1(" TXCSRL%d = %x\n", epn_minus1 + 1, regs->TXCSRL); + // TU_LOG1(" TXCSRL%d = %x\r\n", epn_minus1 + 1, regs->TXCSRL); if (__USBC_Dev_Tx_IsEpStall()) { __USBC_Dev_Tx_ClearStall(); return; } completed = handle_xfer_in(ep_addr); } else { - // TU_LOG1(" RXCSRL%d = %x\n", epn_minus1 + 1, regs->RXCSRL); + // TU_LOG1(" RXCSRL%d = %x\r\n", epn_minus1 + 1, regs->RXCSRL); if (__USBC_Dev_Rx_IsEpStall()) { __USBC_Dev_Rx_ClearStall(); return; @@ -1092,7 +1092,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t t { (void)rhport; bool ret; - // TU_LOG1("X %x %d\n", ep_addr, total_bytes); + // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); unsigned const epnum = tu_edpt_number(ep_addr); musb_int_mask(); @@ -1111,7 +1111,7 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_ { (void)rhport; bool ret; - // TU_LOG1("X %x %d\n", ep_addr, total_bytes); + // TU_LOG1("X %x %d\r\n", ep_addr, total_bytes); unsigned const epnum = tu_edpt_number(ep_addr); TU_ASSERT(epnum); -- cgit v1.3.1 From 2029ca9536e7e889f0f420218136e7bd1ac091fc Mon Sep 17 00:00:00 2001 From: Lars Pötter Date: Sun, 2 Jul 2023 10:53:08 +0200 Subject: also fixed pico_trac() log messages. --- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 4 ++-- src/portable/raspberrypi/rp2040/dcd_rp2040.c | 6 +++--- src/portable/raspberrypi/rp2040/rp2040_usb.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) (limited to 'src') diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 264af2e7a..130716da4 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -150,11 +150,11 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet // // so if any transfer is active on epx, we are busy. Interrupt endpoints have their own // // EPX so ep->active will only be busy if there is a pending transfer on that interrupt endpoint // // on that device -// pico_trace("hcd_edpt_busy dev addr %d ep_addr 0x%x\n", dev_addr, ep_addr); +// pico_trace("hcd_edpt_busy dev addr %d ep_addr 0x%x\r\n", dev_addr, ep_addr); // struct hw_endpoint *ep = get_dev_ep(dev_addr, ep_addr); // assert(ep); // bool busy = ep->active; -// pico_trace("busy == %d\n", busy); +// pico_trace("busy == %d\r\n", busy); // return busy; //} diff --git a/src/portable/raspberrypi/rp2040/dcd_rp2040.c b/src/portable/raspberrypi/rp2040/dcd_rp2040.c index 479b17b67..e8cee73fd 100644 --- a/src/portable/raspberrypi/rp2040/dcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/dcd_rp2040.c @@ -189,7 +189,7 @@ static void hw_endpoint_xfer(uint8_t ep_addr, uint8_t *buffer, uint16_t total_by static void __tusb_irq_path_func(hw_handle_buff_status)(void) { uint32_t remaining_buffers = usb_hw->buf_status; - pico_trace("buf_status = 0x%08lx\n", remaining_buffers); + pico_trace("buf_status = 0x%08lx\r\n", remaining_buffers); uint bit = 1u; for (uint8_t i = 0; remaining_buffers && i < USB_MAX_ENDPOINTS * 2; i++) { @@ -331,7 +331,7 @@ static void __tusb_irq_path_func(dcd_rp2040_irq)(void) // SE0 for 2.5 us or more (will last at least 10ms) if ( status & USB_INTS_BUS_RESET_BITS ) { - pico_trace("BUS RESET\n"); + pico_trace("BUS RESET\r\n"); handled |= USB_INTS_BUS_RESET_BITS; @@ -565,7 +565,7 @@ void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) { (void) rhport; - pico_trace("dcd_edpt_close %02x\n", ep_addr); + pico_trace("dcd_edpt_close %02x\r\n", ep_addr); hw_endpoint_close(ep_addr); } diff --git a/src/portable/raspberrypi/rp2040/rp2040_usb.c b/src/portable/raspberrypi/rp2040/rp2040_usb.c index 53486a586..a512dc34f 100644 --- a/src/portable/raspberrypi/rp2040/rp2040_usb.c +++ b/src/portable/raspberrypi/rp2040/rp2040_usb.c @@ -276,7 +276,7 @@ static uint16_t __tusb_irq_path_func(sync_ep_buffer)(struct hw_endpoint *ep, uin // Short packet if (xferred_bytes < ep->wMaxPacketSize) { - pico_trace(" Short packet on buffer %d with %u bytes\n", buf_id, xferred_bytes); + pico_trace(" Short packet on buffer %d with %u bytes\r\n", buf_id, xferred_bytes); // Reduce total length as this is last packet ep->remaining_len = 0; } @@ -352,7 +352,7 @@ bool __tusb_irq_path_func(hw_endpoint_xfer_continue)(struct hw_endpoint *ep) // If we are done then notify tinyusb if (ep->remaining_len == 0) { - pico_trace("Completed transfer of %d bytes on ep %d %s\n", + pico_trace("Completed transfer of %d bytes on ep %d %s\r\n", ep->xferred_len, tu_edpt_number(ep->ep_addr), ep_dir_string[tu_edpt_dir(ep->ep_addr)]); // Notify caller we are done so it can notify the tinyusb stack hw_endpoint_lock_update(ep, -1); -- cgit v1.3.1 From f79529c09c6e7c0d6ee5586633ceb8c83e345406 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Jul 2023 17:13:01 +0700 Subject: usb hs work with ra 6m5 ek --- .idea/runConfigurations/ra4m1.xml | 10 ++ .idea/runConfigurations/ra6m1.xml | 10 ++ .idea/runConfigurations/ra6m5.xml | 10 ++ hw/bsp/ra/board_cfg.h | 45 +++++++++ hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h | 4 +- hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h | 4 +- hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h | 4 +- hw/bsp/ra/boards/ra6m5_ek/board.cmake | 20 +++- hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h | 4 +- hw/bsp/ra/family.c | 118 ++++++++++++++++-------- hw/bsp/ra/vector_data.h | 15 ++- src/common/tusb_mcu.h | 1 + src/portable/renesas/rusb2/dcd_rusb2.c | 3 +- 13 files changed, 188 insertions(+), 60 deletions(-) create mode 100644 .idea/runConfigurations/ra4m1.xml create mode 100644 .idea/runConfigurations/ra6m1.xml create mode 100644 .idea/runConfigurations/ra6m5.xml create mode 100644 hw/bsp/ra/board_cfg.h (limited to 'src') diff --git a/.idea/runConfigurations/ra4m1.xml b/.idea/runConfigurations/ra4m1.xml new file mode 100644 index 000000000..22bb61949 --- /dev/null +++ b/.idea/runConfigurations/ra4m1.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/ra6m1.xml b/.idea/runConfigurations/ra6m1.xml new file mode 100644 index 000000000..438ac4063 --- /dev/null +++ b/.idea/runConfigurations/ra6m1.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/ra6m5.xml b/.idea/runConfigurations/ra6m5.xml new file mode 100644 index 000000000..02df11610 --- /dev/null +++ b/.idea/runConfigurations/ra6m5.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/hw/bsp/ra/board_cfg.h b/hw/bsp/ra/board_cfg.h new file mode 100644 index 000000000..baed46b5f --- /dev/null +++ b/hw/bsp/ra/board_cfg.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _BOARD_CFG_H +#define _BOARD_CFG_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) + #define BOARD_HAS_USB_HIGHSPEED +#endif + +// for SystemInit() +void bsp_init(void * p_args); + + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h index 19bb473eb..f0577b702 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h @@ -4,6 +4,7 @@ #include "bsp_clock_cfg.h" #include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" #undef RA_NOT_DEFINED #define BSP_CFG_RTOS (0) @@ -31,7 +32,4 @@ #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 -// for SystemInit() -void bsp_init(void * p_args); - #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h index 6a47bccc6..47de7747d 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h @@ -7,6 +7,7 @@ extern "C" { #include "bsp_clock_cfg.h" #include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" #define RA_NOT_DEFINED 0 #ifndef BSP_CFG_RTOS @@ -56,9 +57,6 @@ extern "C" { #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 #endif -// for SystemInit() -void bsp_init(void * p_args); - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h index 75a331fc2..b5ed53a3b 100644 --- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h @@ -8,6 +8,7 @@ extern "C" { #include "bsp_clock_cfg.h" #include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" #define RA_NOT_DEFINED 0 #ifndef BSP_CFG_RTOS @@ -60,9 +61,6 @@ extern "C" { #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 #endif -// for SystemInit() -void bsp_init(void * p_args); - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index 42a4c7417..d934a0c0d 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -3,8 +3,22 @@ set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) +# default to PORT1 Highspeed +if (NOT DEFINED PORT) +set(PORT 1) +endif() + function(update_board TARGET) -# target_compile_definitions(${TARGET} PUBLIC) -# target_sources(${TARGET} PRIVATE) -# target_include_directories(${BOARD_TARGET} PUBLIC) + target_compile_definitions(${TARGET} PUBLIC + BOARD_TUD_RHPORT=${PORT} + # port 0 is fullspeed, port 1 is highspeed + BOARD_TUD_MAX_SPEED=$ + ) + + if (PORT STREQUAL 1) + target_compile_definitions(${TARGET} PUBLIC + CFG_TUSB_RHPORT1_MODE=OPT_MODE_DEVICE|OPT_MODE_HIGH_SPEED + CFG_TUSB_RHPORT0_MODE=0 + ) + endif () endfunction() diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h index e41f603ad..a41536eda 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h @@ -7,6 +7,7 @@ extern "C" { #include "bsp_clock_cfg.h" #include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" #define RA_NOT_DEFINED 0 #ifndef BSP_CFG_RTOS @@ -56,9 +57,6 @@ extern "C" { #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 #endif -// for SystemInit() -void bsp_init(void * p_args); - #ifdef __cplusplus } #endif diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 769678954..36b46beab 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -48,9 +48,9 @@ #include "board.h" /* Key code for writing PRCR register. */ -#define BSP_PRV_PRCR_KEY (0xA500U) +#define BSP_PRV_PRCR_KEY (0xA500U) #define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U) -#define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) +#define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) static const ioport_cfg_t family_pin_cfg = { .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), @@ -62,25 +62,38 @@ static ioport_instance_ctrl_t port_ctrl; // Vector Data //--------------------------------------------------------------------+ -BSP_DONT_REMOVE const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = { +BSP_DONT_REMOVE BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) +const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] = { [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */ [1] = usbfs_resume_handler, /* USBFS RESUME (USBFS resume interrupt) */ [2] = usbfs_d0fifo_handler, /* USBFS FIFO 0 (DMA transfer request 0) */ [3] = usbfs_d1fifo_handler, /* USBFS FIFO 1 (DMA transfer request 1) */ + +#ifdef BOARD_HAS_USB_HIGHSPEED + [4] = usbhs_interrupt_handler, /* USBHS INT (USBHS interrupt) */ + [5] = usbhs_d0fifo_handler, /* USBHS FIFO 0 (DMA transfer request 0) */ + [6] = usbhs_d1fifo_handler, /* USBHS FIFO 1 (DMA transfer request 1) */ +#endif }; + const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = { - [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ - [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ - [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ - [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1) /* USBFS FIFO 1 (DMA transfer request 1) */ + [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ + [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ + [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ + [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1), /* USBFS FIFO 1 (DMA transfer request 1) */ + +#ifdef BOARD_HAS_USB_HIGHSPEED + [4] = BSP_PRV_IELS_ENUM(EVENT_USBHS_USB_INT_RESUME), /* USBHS USB INT RESUME (USBHS interrupt) */ + [5] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_0), /* USBHS FIFO 0 (DMA transfer request 0) */ + [6] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_1), /* USBHS FIFO 1 (DMA transfer request 1) */ +#endif }; //--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ -void board_init(void) -{ +void board_init(void) { /* Configure pins. */ R_IOPORT_Open(&port_ctrl, &family_pin_cfg); @@ -94,8 +107,8 @@ void board_init(void) // Enable USB module R_MSTP->MSTPCRB &= ~(1U << 11U); // FS -#ifdef R_USB_HS0_BASE -// R_MSTP->MSTPCRB &= ~(1U << 12U); // HS +#ifdef BOARD_HAS_USB_HIGHSPEED + R_MSTP->MSTPCRB &= ~(1U << 12U); #endif #if CFG_TUSB_OS == OPT_OS_FREERTOS @@ -145,66 +158,93 @@ void SysTick_Handler(void) { uint32_t board_millis(void) { return system_ticks; } + #endif //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void usbfs_interrupt_handler(void) -{ + +#if CFG_TUD_ENABLED && defined(BOARD_TUD_RHPORT) + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#if CFG_TUH_ENABLED && defined(BOARD_TUH_RHPORT) + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + +//------------- USB0 FullSpeed -------------// +void usbfs_interrupt_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); -#if CFG_TUH_ENABLED + #if PORT_SUPPORT_HOST(0) tuh_int_handler(0); -#endif + #endif -#if CFG_TUD_ENABLED + #if PORT_SUPPORT_DEVICE(0) tud_int_handler(0); -#endif + #endif } -void usbfs_resume_handler(void) -{ +void usbfs_resume_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); -#if CFG_TUH_ENABLED + #if PORT_SUPPORT_HOST(0) tuh_int_handler(0); -#endif + #endif -#if CFG_TUD_ENABLED + #if PORT_SUPPORT_DEVICE(0) tud_int_handler(0); -#endif + #endif } -void usbfs_d0fifo_handler(void) -{ +void usbfs_d0fifo_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); + // TODO not used yet +} -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif +void usbfs_d1fifo_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + // TODO not used yet +} -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif +//------------- USB1 HighSpeed -------------// +#ifdef BOARD_HAS_USB_HIGHSPEED + +void usbhs_interrupt_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1); + #endif + + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); + #endif } -void usbfs_d1fifo_handler(void) -{ +void usbhs_d0fifo_handler(void) { IRQn_Type irq = R_FSP_CurrentIrqGet(); R_BSP_IrqStatusClear(irq); + // TODO not used yet +} -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif +void usbhs_d1fifo_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + // TODO not used yet +} -#if CFG_TUD_ENABLED - tud_int_handler(0); #endif -} //--------------------------------------------------------------------+ // stdlib diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h index 3d8a24634..ca667faa3 100644 --- a/hw/bsp/ra/vector_data.h +++ b/hw/bsp/ra/vector_data.h @@ -6,22 +6,29 @@ extern "C" { #endif -#ifndef VECTOR_DATA_IRQ_COUNT - #define VECTOR_DATA_IRQ_COUNT 4 -#endif - /* ISR prototypes */ void usbfs_interrupt_handler(void); void usbfs_resume_handler(void); void usbfs_d0fifo_handler(void); void usbfs_d1fifo_handler(void); +#ifdef BOARD_HAS_USB_HIGHSPEED +void usbhs_interrupt_handler(void); +void usbhs_d0fifo_handler(void); +void usbhs_d1fifo_handler(void); +#endif + /* Vector table allocations */ #define USBFS_INT_IRQn 0 #define USBFS_RESUME_IRQn 1 #define USBFS_FIFO_0_IRQn 2 #define USBFS_FIFO_1_IRQn 3 +#define USBHS_USB_INT_RESUME_IRQn 4 /* USBHS USB INT RESUME (USBHS interrupt) */ +#define USBHS_FIFO_0_IRQn 5 /* USBHS FIFO 0 (DMA transfer request 0) */ +#define USBHS_FIFO_1_IRQn 6 /* USBHS FIFO 1 (DMA transfer request 1) */ + + #ifdef __cplusplus } #endif diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 9f3be78fd..496ebfc85 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -327,6 +327,7 @@ // Renesas //--------------------------------------------------------------------+ #elif TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N, OPT_MCU_RAXXX) + #define TUP_USBIP_RUSB2 #define TUP_DCD_ENDPOINT_MAX 10 //--------------------------------------------------------------------+ diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index e9ac46517..83d2a34c6 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -31,8 +31,7 @@ // We disable SOF for now until needed later on #define USE_SOF 0 -#if CFG_TUD_ENABLED && (TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) || \ - TU_CHECK_MCU(OPT_MCU_RAXXX)) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_RUSB2) #include "device/dcd.h" #include "rusb2_type.h" -- cgit v1.3.1 From 4f4c93594d8f82c18f9a1052c4da2e7c31fc1b8c Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Jul 2023 17:51:36 +0700 Subject: minor pipe clean up --- src/portable/renesas/rusb2/dcd_rusb2.c | 74 ++++++++++++++++++++-------------- 1 file changed, 43 insertions(+), 31 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 83d2a34c6..b58e0be01 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -93,20 +93,20 @@ typedef struct TU_ATTR_PACKED { typedef union TU_ATTR_PACKED { struct { - volatile uint16_t u8: 8; - volatile uint16_t : 0; + volatile uint8_t u8; + volatile uint8_t reserved8; }; volatile uint16_t u16; } hw_fifo_t; typedef union TU_ATTR_PACKED { struct { - volatile uint32_t : 24; - volatile uint32_t u8: 8; + volatile uint8_t reserved8[3]; + volatile uint8_t u8; }; struct { - volatile uint32_t : 16; - volatile uint32_t u16: 16; + volatile uint16_t reserved16; + volatile uint16_t u16; }; volatile uint32_t u32; } hw_fifo32_t; @@ -126,6 +126,19 @@ typedef struct TU_ATTR_PACKED TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) TU_ATTR_BIT_FIELD_ORDER_END +// Transfer conditions specifiable for each pipe: +// - Pipe 0: Control transfer with 64-byte single buffer +// - Pipes 1 and 2: Bulk isochronous transfer continuous transfer mode with programmable buffer size up +// to 2 KB and optional double buffer +// - Pipes 3 to 5: Bulk transfer continuous transfer mode with programmable buffer size up to 2 KB and +// optional double buffer +// - Pipes 6 to 9: Interrupt transfer with 64-byte single buffer +enum { + PIPE_1ST_BULK = 3, + PIPE_1ST_INTERRUPT = 6, + PIPE_COUNT = 10, +}; + typedef struct { pipe_state_t pipe[10]; @@ -137,34 +150,33 @@ typedef struct //--------------------------------------------------------------------+ static dcd_data_t _dcd; -#ifndef FIRST_BULK_PIPE -#define FIRST_BULK_PIPE 3 -#endif - static unsigned find_pipe(unsigned xfer) { switch (xfer) { - case TUSB_XFER_ISOCHRONOUS: - for (int i = 1; i <= 2; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_BULK: - for (int i = FIRST_BULK_PIPE; i <= 5; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - for (int i = 1; i <= 1; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_INTERRUPT: - for (int i = 6; i <= 9; ++i) { - if (0 == _dcd.pipe[i].ep) return i; - } - break; - default: - /* No support for control transfer */ - break; + case TUSB_XFER_ISOCHRONOUS: + for (int i = 1; i < PIPE_1ST_BULK; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + break; + + case TUSB_XFER_BULK: + for (int i = PIPE_1ST_BULK; i < PIPE_1ST_INTERRUPT; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + for (int i = 1; i < PIPE_1ST_BULK; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + break; + + case TUSB_XFER_INTERRUPT: + for (int i = PIPE_1ST_INTERRUPT; i < PIPE_COUNT; ++i) { + if (0 == _dcd.pipe[i].ep) return i; + } + break; + + default: + /* No support for control transfer */ + break; } return 0; } -- cgit v1.3.1 From f308435b649c37f0cffc1d5a566fb71c22b57aa1 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 5 Jul 2023 22:09:35 +0700 Subject: update ra type to include usbhs registers --- hw/bsp/ra/family.cmake | 1 - hw/bsp/ra/family.mk | 1 - src/portable/renesas/rusb2/rusb2_ra.c | 16 -- src/portable/renesas/rusb2/rusb2_ra.h | 83 +++++---- src/portable/renesas/rusb2/rusb2_type.h | 315 ++++++++++++++++++++------------ 5 files changed, 245 insertions(+), 171 deletions(-) delete mode 100644 src/portable/renesas/rusb2/rusb2_ra.c (limited to 'src') diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index f4e978230..74329165f 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -120,7 +120,6 @@ function(family_configure_example TARGET RTOS) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c - ${TOP}/src/portable/renesas/rusb2/rusb2_ra.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 9b6b02c02..b6e1bb0ae 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -18,7 +18,6 @@ CFLAGS += \ SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ - src/portable/renesas/rusb2/rusb2_ra.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \ $(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \ diff --git a/src/portable/renesas/rusb2/rusb2_ra.c b/src/portable/renesas/rusb2/rusb2_ra.c deleted file mode 100644 index ff2191b1f..000000000 --- a/src/portable/renesas/rusb2/rusb2_ra.c +++ /dev/null @@ -1,16 +0,0 @@ -#include "tusb_option.h" -#include "rusb2_ra.h" - -#if (CFG_TUSB_RHPORT0_MODE != 0) -IRQn_Type _usb_fs_irqn = USBFS_INT_IRQn; -void tud_set_irq_usbfs(IRQn_Type q) { - _usb_fs_irqn = q; -} -#endif - -#if (CFG_TUSB_RHPORT1_MODE != 0) -IRQn_Type _usb_hs_irqn = USBHS_USB_INT_RESUME_IRQn; -void tud_set_irq_usbhs(IRQn_Type q) { - _usb_hs_irqn = q; -} -#endif diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 07fcafe6f..ca7c38907 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -47,55 +47,53 @@ extern "C" { #pragma GCC diagnostic pop #endif -extern IRQn_Type _usb_fs_irqn; -extern IRQn_Type _usb_hs_irqn; +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ -#if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) -// fallback -#define CFG_TUSB_RHPORT0_MODE ( CFG_TUD_ENABLED ? OPT_MODE_DEVICE : OPT_MODE_HOST ) -#define CFG_TUSB_RHPORT1_MODE 0 +// IAR does not have __builtin_ctz +#if defined(__ICCARM__) + #define __builtin_ctz(x) __iar_builtin_CLZ(__iar_builtin_RBIT(x)) #endif -#if defined(__ICCARM__) - #define __builtin_ctz(x) __iar_builtin_CLZ(__iar_builtin_RBIT(x)) +typedef struct { + uint32_t reg_base; + int32_t irqnum; +}rusb2_controller_t; + +#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) + #define RUSB2_HAS_HIGHSPEED + #define RUSB2_CONTROLLER_COUNT 2 +#else + #define RUSB2_CONTROLLER_COUNT 1 #endif +// USBFS_INT_IRQn and USBHS_USB_INT_RESUME_IRQn are generated by FSP +static rusb2_controller_t rusb2_controller[] = { + { .reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn }, + #ifdef RUSB2_HAS_HIGHSPEED + { .reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn }, + #endif +}; + TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) { -#ifdef CFG_TUSB_RHPORT1_MODE -#if (CFG_TUSB_RHPORT1_MODE != 0) - if (rhport == 1) { - NVIC_EnableIRQ(_usb_hs_irqn); - } -#endif -#endif - -#ifdef CFG_TUSB_RHPORT0_MODE -#if (CFG_TUSB_RHPORT0_MODE != 0) - if (rhport == 0) { - NVIC_EnableIRQ(_usb_fs_irqn); - } -#endif -#endif + #if RUSB2_CONTROLLER_COUNT > 1 + NVIC_EnableIRQ(rusb2_controller[rhport].irqnum); + #else + (void) rhport; + NVIC_EnableIRQ(rusb2_controller[0].irqnum); + #endif } TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_disable(uint8_t rhport) { -#ifdef CFG_TUSB_RHPORT1_MODE -#if (CFG_TUSB_RHPORT1_MODE != 0) - if (rhport == 1) { - NVIC_DisableIRQ(_usb_hs_irqn); - } -#endif -#endif - -#ifdef CFG_TUSB_RHPORT0_MODE -#if (CFG_TUSB_RHPORT0_MODE != 0) - if (rhport == 0) { - NVIC_DisableIRQ(_usb_fs_irqn); - } -#endif -#endif + #if RUSB2_CONTROLLER_COUNT > 1 + NVIC_DisableIRQ(rusb2_controller[rhport].irqnum); + #else + (void) rhport; + NVIC_DisableIRQ(rusb2_controller[0].irqnum); + #endif } // MCU specific PHY init @@ -103,6 +101,15 @@ TU_ATTR_ALWAYS_INLINE static inline void rusb2_phy_init(void) { } +void tud_int_set_irqnum(uint8_t rhport, int32_t irqnum) { + #if RUSB2_CONTROLLER_COUNT > 1 + rusb2_controller[rhport].irqnum = irqnum; + #else + (void) rhport; + rusb2_controller[0].irqnum = irqnum; + #endif +} + #ifdef __cplusplus } #endif diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index 90ba4f012..0928f5aeb 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -46,10 +46,10 @@ typedef struct { volatile uint16_t E; /* (@ 0x00000000) Pipe Transaction Counter Enable Register */ struct TU_ATTR_PACKED { - uint16_t : 8; + uint16_t : 8; volatile uint16_t TRCLR : 1; /* [8..8] Transaction Counter Clear */ volatile uint16_t TRENB : 1; /* [9..9] Transaction Counter Enable */ - uint16_t : 6; + uint16_t : 6; } E_b; }; @@ -62,7 +62,8 @@ typedef struct { }; } RUSB2_PIPE_TR_t; /* Size = 4 (0x4) */ -/* LINK_REG Structure */ + +/* RUSB2 Registers Structure */ typedef struct { union { volatile uint16_t SYSCFG; /* (@ 0x00000000) System Configuration Control Register */ @@ -74,7 +75,7 @@ typedef struct { volatile uint16_t DPRPU : 1; /* [4..4] D+ Line Resistor Control */ volatile uint16_t DRPD : 1; /* [5..5] D+/D- Line Resistor Control */ volatile uint16_t DCFM : 1; /* [6..6] Controller Function Select */ - uint16_t : 1; + volatile uint16_t HSE : 1; // [7..7] High-Speed Operation Enable volatile uint16_t CNEN : 1; /* [8..8] CNEN Single End Receiver Enable */ uint16_t : 1; volatile uint16_t SCKE : 1; /* [10..10] USB Clock Enable */ @@ -87,7 +88,7 @@ typedef struct { struct TU_ATTR_PACKED { volatile uint16_t BWAIT : 4; /* [3..0] CPU Bus Access Wait Specification BWAIT waits (BWAIT+2 access cycles) */ - uint16_t : 12; + uint16_t : 12; } BUSWAIT_b; }; @@ -98,8 +99,7 @@ typedef struct { volatile const uint16_t LNST : 2; /* [1..0] USB Data Line Status Monitor */ volatile const uint16_t IDMON : 1; /* [2..2] External ID0 Input Pin Monitor */ uint16_t : 2; - volatile const uint16_t - SOFEA : 1; /* [5..5] SOF Active Monitor While Host Controller Function is Selected. */ + volatile const uint16_t SOFEA : 1; /* [5..5] SOF Active Monitor While Host Controller Function is Selected. */ volatile const uint16_t HTACT : 1; /* [6..6] USB Host Sequencer Status Monitor */ uint16_t : 7; volatile const uint16_t OVCMON : 2; /* [15..14] External USB0_OVRCURA/ USB0_OVRCURB Input Pin Monitor */ @@ -111,7 +111,7 @@ typedef struct { struct TU_ATTR_PACKED { volatile const uint16_t PLLLOCK : 1; /* [0..0] PLL Lock Flag */ - uint16_t : 15; + uint16_t : 15; } PLLSTA_b; }; @@ -139,7 +139,7 @@ typedef struct { struct TU_ATTR_PACKED { volatile uint16_t UTST : 4; /* [3..0] Test Mode */ - uint16_t : 12; + uint16_t : 12; } TESTMODE_b; }; volatile const uint16_t RESERVED1; @@ -295,7 +295,7 @@ typedef struct { volatile uint16_t INTENB0; /* (@ 0x00000030) Interrupt Enable Register 0 */ struct TU_ATTR_PACKED { - uint16_t : 8; + uint16_t : 8; volatile uint16_t BRDYE : 1; /* [8..8] Buffer Ready Interrupt Enable */ volatile uint16_t NRDYE : 1; /* [9..9] Buffer Not Ready Response Interrupt Enable */ volatile uint16_t BEMPE : 1; /* [10..10] Buffer Empty Interrupt Enable */ @@ -316,7 +316,10 @@ typedef struct { volatile uint16_t SACKE : 1; /* [4..4] Setup Transaction Normal Response Interrupt Enable */ volatile uint16_t SIGNE : 1; /* [5..5] Setup Transaction Error Interrupt Enable */ volatile uint16_t EOFERRE : 1; /* [6..6] EOF Error Detection Interrupt Enable */ - uint16_t : 4; + uint16_t : 1; + volatile uint16_t LPMENDE : 1; /*!< [8..8] LPM Transaction End Interrupt Enable */ + volatile uint16_t L1RSMENDE : 1; /*!< [9..9] L1 Resume End Interrupt Enable */ + uint16_t : 1; volatile uint16_t ATTCHE : 1; /* [11..11] Connection Detection Interrupt Enable */ volatile uint16_t DTCHE : 1; /* [12..12] Disconnection Detection Interrupt Enable */ uint16_t : 1; @@ -340,7 +343,7 @@ typedef struct { volatile uint16_t PIPE7BRDYE : 1; /* [7..7] BRDY Interrupt Enable for PIPE */ volatile uint16_t PIPE8BRDYE : 1; /* [8..8] BRDY Interrupt Enable for PIPE */ volatile uint16_t PIPE9BRDYE : 1; /* [9..9] BRDY Interrupt Enable for PIPE */ - uint16_t : 6; + uint16_t : 6; } BRDYENB_b; }; @@ -358,7 +361,7 @@ typedef struct { volatile uint16_t PIPE7NRDYE : 1; /* [7..7] NRDY Interrupt Enable for PIPE */ volatile uint16_t PIPE8NRDYE : 1; /* [8..8] NRDY Interrupt Enable for PIPE */ volatile uint16_t PIPE9NRDYE : 1; /* [9..9] NRDY Interrupt Enable for PIPE */ - uint16_t : 6; + uint16_t : 6; } NRDYENB_b; }; @@ -376,7 +379,7 @@ typedef struct { volatile uint16_t PIPE7BEMPE : 1; /* [7..7] BEMP Interrupt Enable for PIPE */ volatile uint16_t PIPE8BEMPE : 1; /* [8..8] BEMP Interrupt Enable for PIPE */ volatile uint16_t PIPE9BEMPE : 1; /* [9..9] BEMP Interrupt Enable for PIPE */ - uint16_t : 6; + uint16_t : 6; } BEMPENB_b; }; @@ -390,7 +393,7 @@ typedef struct { volatile uint16_t BRDYM : 1; /* [6..6] BRDY Interrupt Status Clear Timing */ uint16_t : 1; volatile uint16_t TRNENSEL : 1; /* [8..8] Transaction-Enabled Time Select */ - uint16_t : 7; + uint16_t : 7; } SOFCFG_b; }; @@ -467,7 +470,7 @@ typedef struct { volatile uint16_t PIPE7BRDY : 1; /* [7..7] BRDY Interrupt Status for PIPE */ volatile uint16_t PIPE8BRDY : 1; /* [8..8] BRDY Interrupt Status for PIPE */ volatile uint16_t PIPE9BRDY : 1; /* [9..9] BRDY Interrupt Status for PIPE */ - uint16_t : 6; + uint16_t : 6; } BRDYSTS_b; }; @@ -485,7 +488,7 @@ typedef struct { volatile uint16_t PIPE7NRDY : 1; /* [7..7] NRDY Interrupt Status for PIPE */ volatile uint16_t PIPE8NRDY : 1; /* [8..8] NRDY Interrupt Status for PIPE */ volatile uint16_t PIPE9NRDY : 1; /* [9..9] NRDY Interrupt Status for PIPE */ - uint16_t : 6; + uint16_t : 6; } NRDYSTS_b; }; @@ -503,7 +506,7 @@ typedef struct { volatile uint16_t PIPE7BEMP : 1; /* [7..7] BEMP Interrupt Status for PIPE */ volatile uint16_t PIPE8BEMP : 1; /* [8..8] BEMP Interrupt Status for PIPE */ volatile uint16_t PIPE9BEMP : 1; /* [9..9] BEMP Interrupt Status for PIPE */ - uint16_t : 6; + uint16_t : 6; } BEMPSTS_b; }; @@ -609,7 +612,8 @@ typedef struct { volatile uint16_t SQCLR : 1; /* [8..8] Sequence Toggle Bit Clear */ uint16_t : 2; volatile uint16_t SUREQCLR : 1; /* [11..11] SUREQ Bit Clear */ - uint16_t : 2; + volatile uint16_t CSSTS : 1; /* [12..12] Split Transaction COMPLETE SPLIT(CSPLIT) Status */ + volatile uint16_t CSCLR : 1; /* [13..13] Split Transaction CSPLIT Status Clear */ volatile uint16_t SUREQ : 1; /* [14..14] Setup Token Transmission */ volatile const uint16_t BSTS : 1; /* [15..15] Buffer Status */ } DCPCTR_b; @@ -621,7 +625,7 @@ typedef struct { struct TU_ATTR_PACKED { volatile uint16_t PIPESEL : 4; /* [3..0] Pipe Window Select */ - uint16_t : 12; + uint16_t : 12; } PIPESEL_b; }; volatile const uint16_t RESERVED11; @@ -634,21 +638,31 @@ typedef struct { volatile uint16_t DIR : 1; /* [4..4] Transfer Direction */ uint16_t : 2; volatile uint16_t SHTNAK : 1; /* [7..7] Pipe Disabled at End of Transfer */ - uint16_t : 1; + volatile uint16_t CNTMD : 1; /* [8..8] Continuous Transfer Mode */ volatile uint16_t DBLB : 1; /* [9..9] Double Buffer Mode */ volatile uint16_t BFRE : 1; /* [10..10] BRDY Interrupt Operation Specification */ uint16_t : 3; volatile uint16_t TYPE : 2; /* [15..14] Transfer Type */ } PIPECFG_b; }; - volatile const uint16_t RESERVED12; + + union { + volatile uint16_t PIPEBUF; /*!< (@ 0x0000006A) Pipe Buffer Register */ + + struct { + volatile uint16_t BUFNMB : 8; // [7..0] Buffer NumberThese bits specify the FIFO buffer number of the selected pipe (04h to 87h) + uint16_t : 2; + volatile uint16_t BUFSIZE : 5; /*!< [14..10] Buffer Size 00h: 64 bytes 01h: 128 bytes : 1Fh: 2 Kbytes */ + uint16_t : 1; + } PIPEBUF_b; + }; union { volatile uint16_t PIPEMAXP; /* (@ 0x0000006C) Pipe Maximum Packet Size Register */ struct TU_ATTR_PACKED { - volatile uint16_t MXPS : 9; /* [8..0] Maximum Packet Size */ - uint16_t : 3; + volatile uint16_t MXPS : 11; /* [10..0] Maximum Packet Size */ + uint16_t : 1; volatile uint16_t DEVSEL : 4; /* [15..12] Device Select */ } PIPEMAXP_b; }; @@ -694,11 +708,9 @@ typedef struct { struct TU_ATTR_PACKED { volatile uint16_t RPDME0 : 1; /* [0..0] D- Pin Pull-Down Control */ volatile uint16_t IDPSRCE0 : 1; /* [1..1] D+ Pin IDPSRC Output Control */ - volatile uint16_t - IDMSINKE0 : 1; /* [2..2] D- Pin 0.6 V Input Detection (Comparator and Sink) Control */ + volatile uint16_t IDMSINKE0 : 1; /* [2..2] D- Pin 0.6 V Input Detection (Comparator and Sink) Control */ volatile uint16_t VDPSRCE0 : 1; /* [3..3] D+ Pin VDPSRC (0.6 V) Output Control */ - volatile uint16_t - IDPSINKE0 : 1; /* [4..4] D+ Pin 0.6 V Input Detection (Comparator and Sink) Control */ + volatile uint16_t IDPSINKE0 : 1; /* [4..4] D+ Pin 0.6 V Input Detection (Comparator and Sink) Control */ volatile uint16_t VDMSRCE0 : 1; /* [5..5] D- Pin VDMSRC (0.6 V) Output Control */ uint16_t : 1; volatile uint16_t BATCHGE0 : 1; /* [7..7] BC (Battery Charger) Function Ch0 General Enable Control */ @@ -715,7 +727,7 @@ typedef struct { struct TU_ATTR_PACKED { volatile uint16_t UCKSELC : 1; /* [0..0] USB Clock Selection */ - uint16_t : 15; + uint16_t : 15; } UCKSEL_b; }; volatile const uint16_t RESERVED18; @@ -737,11 +749,11 @@ typedef struct { volatile uint16_t DEVADD[10]; /* (@ 0x000000D0) Device Address Configuration Register */ struct TU_ATTR_PACKED { - uint16_t : 6; + uint16_t : 6; volatile uint16_t USBSPD : 2; /* [7..6] Transfer Speed of Communication Target Device */ volatile uint16_t HUBPORT : 3; /* [10..8] Communication Target Connecting Hub Port */ volatile uint16_t UPPHUB : 4; /* [14..11] Communication Target Connecting Hub Register */ - uint16_t : 1; + uint16_t : 1; } DEVADD_b[10]; }; volatile const uint32_t RESERVED21[3]; @@ -754,7 +766,7 @@ typedef struct { volatile uint32_t SLEWR01 : 1; /* [1..1] Receiver Cross Point Adjustment 01 */ volatile uint32_t SLEWF00 : 1; /* [2..2] Receiver Cross Point Adjustment 00 */ volatile uint32_t SLEWF01 : 1; /* [3..3] Receiver Cross Point Adjustment 01 */ - uint32_t : 28; + uint32_t : 28; } PHYSLEW_b; }; volatile const uint32_t RESERVED22[3]; @@ -763,9 +775,9 @@ typedef struct { volatile uint16_t LPCTRL; /* (@ 0x00000100) Low Power Control Register */ struct TU_ATTR_PACKED { - uint16_t : 7; + uint16_t : 7; volatile uint16_t HWUPM : 1; /* [7..7] Resume Return Mode Setting */ - uint16_t : 8; + uint16_t : 8; } LPCTRL_b; }; @@ -773,9 +785,9 @@ typedef struct { volatile uint16_t LPSTS; /* (@ 0x00000102) Low Power Status Register */ struct TU_ATTR_PACKED { - uint16_t : 14; + uint16_t : 14; volatile uint16_t SUSPENDM : 1; /* [14..14] UTMI SuspendM Control */ - uint16_t : 1; + uint16_t : 1; } LPSTS_b; }; volatile const uint32_t RESERVED23[15]; @@ -793,7 +805,7 @@ typedef struct { uint16_t : 2; volatile const uint16_t CHGDETSTS : 1; /* [8..8] CHGDET Status */ volatile const uint16_t PDDETSTS : 1; /* [9..9] PDDET Status */ - uint16_t : 6; + uint16_t : 6; } BCCTRL_b; }; volatile const uint16_t RESERVED24; @@ -809,7 +821,7 @@ typedef struct { volatile uint16_t HIRDTHR : 4; /* [11..8] L1 Response Negotiation Threshold Value */ uint16_t : 2; volatile uint16_t L1EXTMD : 1; /* [14..14] PHY Control Mode at L1 Return */ - uint16_t : 1; + uint16_t : 1; } PL1CTRL1_b; }; @@ -817,10 +829,10 @@ typedef struct { volatile uint16_t PL1CTRL2; /* (@ 0x00000146) Function L1 Control Register 2 */ struct TU_ATTR_PACKED { - uint16_t : 8; + uint16_t : 8; volatile uint16_t HIRDMON : 4; /* [11..8] HIRD Value Monitor */ volatile uint16_t RWEMON : 1; /* [12..12] RWE Value Monitor */ - uint16_t : 3; + uint16_t : 3; } PL1CTRL2_b; }; @@ -830,7 +842,7 @@ typedef struct { struct TU_ATTR_PACKED { volatile uint16_t L1REQ : 1; /* [0..0] L1 Transition Request */ volatile const uint16_t L1STATUS : 2; /* [2..1] L1 Request Completion Status */ - uint16_t : 13; + uint16_t : 13; } HL1CTRL1_b; }; @@ -846,18 +858,48 @@ typedef struct { volatile uint16_t BESL : 1; /* [15..15] BESL & Alternate HIRD */ } HL1CTRL2_b; }; - volatile const uint32_t RESERVED25[5]; + + volatile uint32_t RESERVED25_1; + + union { + volatile uint16_t PHYTRIM1; /*!< (@ 0x00000150) PHY Timing Register 1 */ + + struct { + volatile uint16_t DRISE : 2; /*!< [1..0] FS/LS Rising-Edge Output Waveform Adjustment Function */ + volatile uint16_t DFALL : 2; /*!< [3..2] FS/LS Falling-Edge Output Waveform Adjustment Function */ + uint16_t : 3; + volatile uint16_t PCOMPENB : 1; /*!< [7..7] PVDD Start-up Detection */ + volatile uint16_t HSIUP : 4; /*!< [11..8] HS Output Level Setting */ + volatile uint16_t IMPOFFSET : 3; /*!< [14..12] terminating resistance offset value setting.Offset value for adjusting the terminating resistance. */ + uint16_t : 1; + } PHYTRIM1_b; + }; + + union { + volatile uint16_t PHYTRIM2; /*!< (@ 0x00000152) PHY Timing Register 2 */ + + struct { + volatile uint16_t SQU : 4; /*!< [3..0] Squelch Detection Level */ + uint16_t : 3; + volatile uint16_t HSRXENMO : 1; /*!< [7..7] HS Receive Enable Control Mode */ + volatile uint16_t PDR : 2; /*!< [9..8] HS Output Adjustment Function */ + uint16_t : 2; + volatile uint16_t DIS : 3; /*!< [14..12] Disconnect Detection Level */ + uint16_t : 1; + } PHYTRIM2_b; + }; + volatile uint32_t RESERVED25_2[3]; union { volatile const uint32_t DPUSR0R; /* (@ 0x00000160) Deep Standby USB Transceiver Control/Pin Monitor Register */ struct TU_ATTR_PACKED { - uint32_t : 20; + uint32_t : 20; volatile const uint32_t DOVCAHM : 1; /* [20..20] OVRCURA InputIndicates OVRCURA input signal on the HS side of USB port. */ volatile const uint32_t DOVCBHM : 1; /* [21..21] OVRCURB InputIndicates OVRCURB input signal on the HS side of USB port. */ uint32_t : 1; volatile const uint32_t DVBSTSHM : 1; /* [23..23] VBUS InputIndicates VBUS input signal on the HS side of USB port. */ - uint32_t : 8; + uint32_t : 8; } DPUSR0R_b; }; @@ -865,7 +907,7 @@ typedef struct { volatile uint32_t DPUSR1R; /* (@ 0x00000164) Deep Standby USB Suspend/Resume Interrupt Register */ struct TU_ATTR_PACKED { - uint32_t : 4; + uint32_t : 4; volatile uint32_t DOVCAHE : 1; /* [4..4] OVRCURA Interrupt Enable Clear */ volatile uint32_t DOVCBHE : 1; /* [5..5] OVRCURB Interrupt Enable Clear */ uint32_t : 1; @@ -875,7 +917,7 @@ typedef struct { volatile const uint32_t DOVCBH : 1; /* [21..21] Indication of Return from OVRCURB Interrupt Source */ uint32_t : 1; volatile const uint32_t DVBSTSH : 1; /* [23..23] Indication of Return from VBUS Interrupt Source */ - uint32_t : 8; + uint32_t : 8; } DPUSR1R_b; }; @@ -891,7 +933,7 @@ typedef struct { uint16_t : 2; volatile uint16_t DPINTE : 1; /* [8..8] DP Interrupt Enable Clear */ volatile uint16_t DMINTE : 1; /* [9..9] DM Interrupt Enable Clear */ - uint16_t : 6; + uint16_t : 6; } DPUSR2R_b; }; @@ -901,7 +943,7 @@ typedef struct { struct TU_ATTR_PACKED { volatile uint16_t FIXPHY : 1; /* [0..0] USB Transceiver Control Fix */ volatile uint16_t FIXPHYPD : 1; /* [1..1] USB Transceiver Control Fix for PLL */ - uint16_t : 14; + uint16_t : 14; } DPUSRCR_b; }; volatile const uint32_t RESERVED26[165]; @@ -924,7 +966,7 @@ typedef struct { volatile const uint32_t DOVCB0 : 1; /* [21..21] USB OVRCURB InputIndicates the OVRCURB input signal of the USB. */ uint32_t : 1; volatile const uint32_t DVBSTS0 : 1; /* [23..23] USB VBUS InputIndicates the VBUS input signal of the USB. */ - uint32_t : 8; + uint32_t : 8; } DPUSR0R_FS_b; }; @@ -947,10 +989,10 @@ typedef struct { volatile const uint32_t DOVRCRB0 : 1; /* [21..21] USB OVRCURB Interrupt Source Recovery */ uint32_t : 1; volatile const uint32_t DVBINT0 : 1; /* [23..23] USB VBUS Interrupt Source Recovery */ - uint32_t : 8; + uint32_t : 8; } DPUSR1R_FS_b; }; -} RUSB2_REG_t; /* Size = 1032 (0x408) */ +} rusb2_reg_t; /* Size = 1032 (0x408) */ TU_ATTR_PACKED_END /* End of definition of packed structs (used by the CCRX toolchain) */ TU_ATTR_BIT_FIELD_ORDER_END @@ -970,13 +1012,15 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_PIPE_TR_N_TRNCNT_Pos (0UL) /* TRNCNT (Bit 0) */ #define RUSB2_PIPE_TR_N_TRNCNT_Msk (0xffffUL) /* TRNCNT (Bitfield-Mask: 0xffff) */ -// LINK_REG +// Core Registers // SYSCFG #define RUSB2_SYSCFG_SCKE_Pos (10UL) /* SCKE (Bit 10) */ #define RUSB2_SYSCFG_SCKE_Msk (0x400UL) /* SCKE (Bitfield-Mask: 0x01) */ #define RUSB2_SYSCFG_CNEN_Pos (8UL) /* CNEN (Bit 8) */ #define RUSB2_SYSCFG_CNEN_Msk (0x100UL) /* CNEN (Bitfield-Mask: 0x01) */ +#define RUSB2_SYSCFG_HSE_Pos (7UL) /*!< HSE (Bit 7) */ +#define RUSB2_SYSCFG_HSE_Msk (0x80UL) /*!< HSE (Bitfield-Mask: 0x01) */ #define RUSB2_SYSCFG_DCFM_Pos (6UL) /* DCFM (Bit 6) */ #define RUSB2_SYSCFG_DCFM_Msk (0x40UL) /* DCFM (Bitfield-Mask: 0x01) */ #define RUSB2_SYSCFG_DRPD_Pos (5UL) /* DRPD (Bit 5) */ @@ -1135,6 +1179,10 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_INTENB1_DTCHE_Msk (0x1000UL) /* DTCHE (Bitfield-Mask: 0x01) */ #define RUSB2_INTENB1_ATTCHE_Pos (11UL) /* ATTCHE (Bit 11) */ #define RUSB2_INTENB1_ATTCHE_Msk (0x800UL) /* ATTCHE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_L1RSMENDE_Pos (9UL) /*!< L1RSMENDE (Bit 9) */ +#define RUSB2_INTENB1_L1RSMENDE_Msk (0x200UL) /*!< L1RSMENDE (Bitfield-Mask: 0x01) */ +#define RUSB2_INTENB1_LPMENDE_Pos (8UL) /*!< LPMENDE (Bit 8) */ +#define RUSB2_INTENB1_LPMENDE_Msk (0x100UL) /*!< LPMENDE (Bitfield-Mask: 0x01) */ #define RUSB2_INTENB1_EOFERRE_Pos (6UL) /* EOFERRE (Bit 6) */ #define RUSB2_INTENB1_EOFERRE_Msk (0x40UL) /* EOFERRE (Bitfield-Mask: 0x01) */ #define RUSB2_INTENB1_SIGNE_Pos (5UL) /* SIGNE (Bit 5) */ @@ -1299,6 +1347,10 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_DCPCTR_BSTS_Msk (0x8000UL) /* BSTS (Bitfield-Mask: 0x01) */ #define RUSB2_DCPCTR_SUREQ_Pos (14UL) /* SUREQ (Bit 14) */ #define RUSB2_DCPCTR_SUREQ_Msk (0x4000UL) /* SUREQ (Bitfield-Mask: 0x01) */ +#define R_USB_HS0_DCPCTR_CSCLR_Pos (13UL) /*!< CSCLR (Bit 13) */ +#define RUSB2_DCPCTR_CSCLR_Msk (0x2000UL) /*!< CSCLR (Bitfield-Mask: 0x01) */ +#define RUSB2_DCPCTR_CSSTS_Pos (12UL) /*!< CSSTS (Bit 12) */ +#define RUSB2_DCPCTR_CSSTS_Msk (0x1000UL) /*!< CSSTS (Bitfield-Mask: 0x01) */ #define RUSB2_DCPCTR_SUREQCLR_Pos (11UL) /* SUREQCLR (Bit 11) */ #define RUSB2_DCPCTR_SUREQCLR_Msk (0x800UL) /* SUREQCLR (Bitfield-Mask: 0x01) */ #define RUSB2_DCPCTR_SQCLR_Pos (8UL) /* SQCLR (Bit 8) */ @@ -1325,6 +1377,8 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_PIPECFG_BFRE_Msk (0x400UL) /* BFRE (Bitfield-Mask: 0x01) */ #define RUSB2_PIPECFG_DBLB_Pos (9UL) /* DBLB (Bit 9) */ #define RUSB2_PIPECFG_DBLB_Msk (0x200UL) /* DBLB (Bitfield-Mask: 0x01) */ +#define RUSB2_PIPECFG_CNTMD_Pos (8UL) /*!< CNTMD (Bit 8) */ +#define RUSB2_PIPECFG_CNTMD_Msk (0x100UL) /*!< CNTMD (Bitfield-Mask: 0x01) */ #define RUSB2_PIPECFG_SHTNAK_Pos (7UL) /* SHTNAK (Bit 7) */ #define RUSB2_PIPECFG_SHTNAK_Msk (0x80UL) /* SHTNAK (Bitfield-Mask: 0x01) */ #define RUSB2_PIPECFG_DIR_Pos (4UL) /* DIR (Bit 4) */ @@ -1332,6 +1386,12 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_PIPECFG_EPNUM_Pos (0UL) /* EPNUM (Bit 0) */ #define RUSB2_PIPECFG_EPNUM_Msk (0xfUL) /* EPNUM (Bitfield-Mask: 0x0f) */ +// PIPEBUF +#define RUSB2_PIPEBUF_BUFSIZE_Pos (10UL) /*!< BUFSIZE (Bit 10) */ +#define RUSB2_PIPEBUF_BUFSIZE_Msk (0x7c00UL) /*!< BUFSIZE (Bitfield-Mask: 0x1f) */ +#define RUSB2_PIPEBUF_BUFNMB_Pos (0UL) /*!< BUFNMB (Bit 0) */ +#define RUSB2_PIPEBUF_BUFNMB_Msk (0xffUL) /*!< BUFNMB (Bitfield-Mask: 0xff) */ + // PIPEMAXP #define RUSB2_PIPEMAXP_DEVSEL_Pos (12UL) /* DEVSEL (Bit 12) */ #define RUSB2_PIPEMAXP_DEVSEL_Msk (0xf000UL) /* DEVSEL (Bitfield-Mask: 0x0f) */ @@ -1478,6 +1538,28 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_HL1CTRL2_L1ADDR_Pos (0UL) /* L1ADDR (Bit 0) */ #define RUSB2_HL1CTRL2_L1ADDR_Msk (0xfUL) /* L1ADDR (Bitfield-Mask: 0x0f) */ +// PHYTRIM1 +#define RUSB2_PHYTRIM1_IMPOFFSET_Pos (12UL) /*!< IMPOFFSET (Bit 12) */ +#define RUSB2_PHYTRIM1_IMPOFFSET_Msk (0x7000UL) /*!< IMPOFFSET (Bitfield-Mask: 0x07) */ +#define RUSB2_PHYTRIM1_HSIUP_Pos (8UL) /*!< HSIUP (Bit 8) */ +#define RUSB2_PHYTRIM1_HSIUP_Msk (0xf00UL) /*!< HSIUP (Bitfield-Mask: 0x0f) */ +#define RUSB2_PHYTRIM1_PCOMPENB_Pos (7UL) /*!< PCOMPENB (Bit 7) */ +#define RUSB2_PHYTRIM1_PCOMPENB_Msk (0x80UL) /*!< PCOMPENB (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYTRIM1_DFALL_Pos (2UL) /*!< DFALL (Bit 2) */ +#define RUSB2_PHYTRIM1_DFALL_Msk (0xcUL) /*!< DFALL (Bitfield-Mask: 0x03) */ +#define RUSB2_PHYTRIM1_DRISE_Pos (0UL) /*!< DRISE (Bit 0) */ +#define RUSB2_PHYTRIM1_DRISE_Msk (0x3UL) /*!< DRISE (Bitfield-Mask: 0x03) */ + +// PHYTRIM2 +#define RUSB2_PHYTRIM2_DIS_Pos (12UL) /*!< DIS (Bit 12) */ +#define RUSB2_PHYTRIM2_DIS_Msk (0x7000UL) /*!< DIS (Bitfield-Mask: 0x07) */ +#define RUSB2_PHYTRIM2_PDR_Pos (8UL) /*!< PDR (Bit 8) */ +#define RUSB2_PHYTRIM2_PDR_Msk (0x300UL) /*!< PDR (Bitfield-Mask: 0x03) */ +#define RUSB2_PHYTRIM2_HSRXENMO_Pos (7UL) /*!< HSRXENMO (Bit 7) */ +#define RUSB2_PHYTRIM2_HSRXENMO_Msk (0x80UL) /*!< HSRXENMO (Bitfield-Mask: 0x01) */ +#define RUSB2_PHYTRIM2_SQU_Pos (0UL) /*!< SQU (Bit 0) */ +#define RUSB2_PHYTRIM2_SQU_Msk (0xfUL) /*!< SQU (Bitfield-Mask: 0x0f) */ + // DPUSR0R #define RUSB2_DPUSR0R_DVBSTSHM_Pos (23UL) /* DVBSTSHM (Bit 23) */ #define RUSB2_DPUSR0R_DVBSTSHM_Msk (0x800000UL) /* DVBSTSHM (Bitfield-Mask: 0x01) */ @@ -1599,69 +1681,72 @@ TU_ATTR_BIT_FIELD_ORDER_END //--------------------------------------------------------------------+ TU_VERIFY_STATIC(sizeof(RUSB2_PIPE_TR_t) == 4, "incorrect size"); -TU_VERIFY_STATIC(sizeof(RUSB2_REG_t) == 1032, "incorrect size"); - -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, SYSCFG ) == 0x00000000, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BUSWAIT ) == 0x00000002, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, SYSSTS0 ) == 0x00000004, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PLLSTA ) == 0x00000006, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DVSTCTR0 ) == 0x00000008, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, TESTMODE ) == 0x0000000C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, CFIFO ) == 0x00000014, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D0FIFO ) == 0x00000018, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D1FIFO ) == 0x0000001C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, CFIFOSEL ) == 0x00000020, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, CFIFOCTR ) == 0x00000022, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D0FIFOSEL ) == 0x00000028, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D0FIFOCTR ) == 0x0000002A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D1FIFOSEL ) == 0x0000002C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, D1FIFOCTR ) == 0x0000002E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTENB0 ) == 0x00000030, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTENB1 ) == 0x00000032, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BRDYENB ) == 0x00000036, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, NRDYENB ) == 0x00000038, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BEMPENB ) == 0x0000003A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, SOFCFG ) == 0x0000003C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PHYSET ) == 0x0000003E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTSTS0 ) == 0x00000040, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, INTSTS1 ) == 0x00000042, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BRDYSTS ) == 0x00000046, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, NRDYSTS ) == 0x00000048, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BEMPSTS ) == 0x0000004A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, FRMNUM ) == 0x0000004C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, UFRMNUM ) == 0x0000004E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBADDR ) == 0x00000050, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBREQ ) == 0x00000054, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBVAL ) == 0x00000056, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBINDX ) == 0x00000058, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBLENG ) == 0x0000005A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DCPCFG ) == 0x0000005C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DCPMAXP ) == 0x0000005E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DCPCTR ) == 0x00000060, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPESEL ) == 0x00000064, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPECFG ) == 0x00000068, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPEMAXP ) == 0x0000006C, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPEPERI ) == 0x0000006E, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPE_CTR ) == 0x00000070, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PIPE_TR ) == 0x00000090, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBBCCTRL0 ) == 0x000000B0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, UCKSEL ) == 0x000000C4, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, USBMC ) == 0x000000CC, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DEVADD ) == 0x000000D0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PHYSLEW ) == 0x000000F0, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, LPCTRL ) == 0x00000100, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, LPSTS ) == 0x00000102, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, BCCTRL ) == 0x00000140, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PL1CTRL1 ) == 0x00000144, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, PL1CTRL2 ) == 0x00000146, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, HL1CTRL1 ) == 0x00000148, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, HL1CTRL2 ) == 0x0000014A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR0R ) == 0x00000160, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR1R ) == 0x00000164, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR2R ) == 0x00000168, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSRCR ) == 0x0000016A, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR0R_FS ) == 0x00000400, "incorrect offset"); -TU_VERIFY_STATIC(offsetof(RUSB2_REG_t, DPUSR1R_FS ) == 0x00000404, "incorrect offset"); +TU_VERIFY_STATIC(sizeof(rusb2_reg_t) == 1032, "incorrect size"); + +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, SYSCFG ) == 0x0000, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, BUSWAIT ) == 0x0002, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, SYSSTS0 ) == 0x0004, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PLLSTA ) == 0x0006, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DVSTCTR0 ) == 0x0008, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, TESTMODE ) == 0x000C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, CFIFO ) == 0x0014, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, D0FIFO ) == 0x0018, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, D1FIFO ) == 0x001C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, CFIFOSEL ) == 0x0020, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, CFIFOCTR ) == 0x0022, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, D0FIFOSEL ) == 0x0028, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, D0FIFOCTR ) == 0x002A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, D1FIFOSEL ) == 0x002C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, D1FIFOCTR ) == 0x002E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, INTENB0 ) == 0x0030, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, INTENB1 ) == 0x0032, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, BRDYENB ) == 0x0036, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, NRDYENB ) == 0x0038, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, BEMPENB ) == 0x003A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, SOFCFG ) == 0x003C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PHYSET ) == 0x003E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, INTSTS0 ) == 0x0040, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, INTSTS1 ) == 0x0042, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, BRDYSTS ) == 0x0046, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, NRDYSTS ) == 0x0048, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, BEMPSTS ) == 0x004A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, FRMNUM ) == 0x004C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, UFRMNUM ) == 0x004E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, USBADDR ) == 0x0050, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, USBREQ ) == 0x0054, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, USBVAL ) == 0x0056, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, USBINDX ) == 0x0058, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, USBLENG ) == 0x005A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DCPCFG ) == 0x005C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DCPMAXP ) == 0x005E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DCPCTR ) == 0x0060, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PIPESEL ) == 0x0064, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PIPECFG ) == 0x0068, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PIPEBUF ) == 0x006A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PIPEMAXP ) == 0x006C, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PIPEPERI ) == 0x006E, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PIPE_CTR ) == 0x0070, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PIPE_TR ) == 0x0090, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, USBBCCTRL0 ) == 0x00B0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, UCKSEL ) == 0x00C4, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, USBMC ) == 0x00CC, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DEVADD ) == 0x00D0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PHYSLEW ) == 0x00F0, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, LPCTRL ) == 0x0100, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, LPSTS ) == 0x0102, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, BCCTRL ) == 0x0140, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PL1CTRL1 ) == 0x0144, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PL1CTRL2 ) == 0x0146, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, HL1CTRL1 ) == 0x0148, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, HL1CTRL2 ) == 0x014A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PHYTRIM1 ) == 0x0150, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, PHYTRIM2 ) == 0x0152, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DPUSR0R ) == 0x0160, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DPUSR1R ) == 0x0164, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DPUSR2R ) == 0x0168, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DPUSRCR ) == 0x016A, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DPUSR0R_FS ) == 0x0400, "incorrect offset"); +TU_VERIFY_STATIC(offsetof(rusb2_reg_t, DPUSR1R_FS ) == 0x0404, "incorrect offset"); #ifdef __cplusplus } -- cgit v1.3.1 From 95b77a0e7356b5f6625fbdb66f35415db3aac7a9 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Jul 2023 15:54:07 +0700 Subject: add rusb2_module_start(), more update for multiple ports for dcd rusb2 --- hw/bsp/ra/family.c | 7 - src/portable/renesas/rusb2/dcd_rusb2.c | 280 +++++++++++++++++++------------- src/portable/renesas/rusb2/rusb2_ra.h | 38 ++--- src/portable/renesas/rusb2/rusb2_rx.h | 6 + src/portable/renesas/rusb2/rusb2_type.h | 1 + 5 files changed, 190 insertions(+), 142 deletions(-) (limited to 'src') diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 36b46beab..2c21a9967 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -104,13 +104,6 @@ void board_init(void) { R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk | 0x01; #endif - // Enable USB module - R_MSTP->MSTPCRB &= ~(1U << 11U); // FS - -#ifdef BOARD_HAS_USB_HIGHSPEED - R_MSTP->MSTPCRB &= ~(1U << 12U); -#endif - #if CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) NVIC_SetPriority(USBFS_INT_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index b58e0be01..27d525b68 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -65,9 +65,9 @@ /* LINK core registers */ #if defined(__CCRX__) - #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) + #define RUSB2 ((rusb2_reg_t __evenaccess*) RUSB2_REG_BASE) #elif defined(__RX__) - #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) + #define RUSB2 ((rusb2_reg_t*) RUSB2_REG_BASE) #elif (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) #define RUSB2 ((R_USB_HS0_Type*)R_USB_HS0_BASE) #else @@ -145,10 +145,15 @@ typedef struct uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */ } dcd_data_t; +static dcd_data_t _dcd; + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -static dcd_data_t _dcd; + +TU_ATTR_ALWAYS_INLINE static inline bool is_highspeed(uint8_t rhport) { + return rhport == 1; +} static unsigned find_pipe(unsigned xfer) { @@ -543,38 +548,60 @@ static void process_pipe_brdy(uint8_t rhport, unsigned num) static void process_bus_reset(uint8_t rhport) { - RUSB2->BEMPENB = 1; - RUSB2->BRDYENB = 1; - RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; - RUSB2->D0FIFOSEL = 0; - while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - RUSB2->D1FIFOSEL = 0; - while (RUSB2->D1FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ - volatile uint16_t *ctr = (volatile uint16_t*)((uintptr_t) (&RUSB2->PIPE_CTR[0])); - volatile uint16_t *tre = (volatile uint16_t*)((uintptr_t) (&RUSB2->PIPE_TR[0].E)); + rusb2_reg_t* rusb = RUSB2_REG(rhport); + + rusb->BEMPENB = 1; + rusb->BRDYENB = 1; + rusb->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + + rusb->D0FIFOSEL = 0; + while (rusb->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + + rusb->D1FIFOSEL = 0; + while (rusb->D1FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + + volatile uint16_t *ctr = (volatile uint16_t*)((uintptr_t) (&rusb->PIPE_CTR[0])); + volatile uint16_t *tre = (volatile uint16_t*)((uintptr_t) (&rusb->PIPE_TR[0].E)); + for (int i = 1; i <= 5; ++i) { - RUSB2->PIPESEL = i; - RUSB2->PIPECFG = 0; + rusb->PIPESEL = i; + rusb->PIPECFG = 0; *ctr = RUSB2_PIPE_CTR_ACLRM_Msk; *ctr = 0; ++ctr; *tre = TU_BIT(8); tre += 2; } + for (int i = 6; i <= 9; ++i) { - RUSB2->PIPESEL = i; - RUSB2->PIPECFG = 0; + rusb->PIPESEL = i; + rusb->PIPECFG = 0; *ctr = RUSB2_PIPE_CTR_ACLRM_Msk; *ctr = 0; ++ctr; } tu_varclr(&_dcd); -#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) - dcd_event_bus_reset(rhport, TUSB_SPEED_HIGH, true); -#else - dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true); -#endif + TU_LOG3("Bus reset, RHST = %u\r\n", rusb->DVSTCTR0_b.RHST); + tusb_speed_t speed; + switch(rusb->DVSTCTR0 & RUSB2_DVSTCTR0_RHST_Msk) { + case RUSB2_DVSTCTR0_RHST_LS: + speed = TUSB_SPEED_LOW; + break; + + case RUSB2_DVSTCTR0_RHST_FS: + speed = TUSB_SPEED_FULL; + break; + + case RUSB2_DVSTCTR0_RHST_HS: + speed = TUSB_SPEED_HIGH; + break; + + default: + TU_ASSERT(false, ); + } + + dcd_event_bus_reset(rhport, speed, true); } static void process_set_address(uint8_t rhport) @@ -625,56 +652,63 @@ static void enable_interrupt(uint32_t pswi) void dcd_init(uint8_t rhport) { - (void)rhport; + rusb2_reg_t* rusb = RUSB2_REG(rhport); -#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) - RUSB2->SYSCFG_b.HSE = 1; - RUSB2->PHYSET_b.DIRPD = 0; - R_BSP_SoftwareDelay((uint32_t) 1, BSP_DELAY_UNITS_MILLISECONDS); - RUSB2->PHYSET_b.PLLRESET = 0; - //RUSB2->PHYSET_b.REPSTART = 1; - RUSB2->SYSCFG_b.DRPD = 0; - RUSB2->SYSCFG_b.USBE = 1; - RUSB2->LPSTS_b.SUSPENDM = 1; - while (!RUSB2->PLLSTA_b.PLLLOCK); - //RUSB2->BUSWAIT |= 0x0F00U; - //RUSB2->PHYSET_b.REPSEL = 1; - RUSB2->CFIFOSEL_b.MBW = 1; - RUSB2->D0FIFOSEL_b.MBW = 1; - RUSB2->D1FIFOSEL_b.MBW = 1; - RUSB2->INTSTS0 = 0; -#else - RUSB2->SYSCFG_b.SCKE = 1; - while (!RUSB2->SYSCFG_b.SCKE) ; - RUSB2->SYSCFG_b.DRPD = 0; - RUSB2->SYSCFG_b.DCFM = 0; - RUSB2->SYSCFG_b.USBE = 1; -#endif + rusb2_module_start(rhport, true); - // MCU specific PHY init - rusb2_phy_init(); + if ( is_highspeed(rhport) ) { + rusb->SYSCFG_b.HSE = 1; -#if (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) - RUSB2->PHYSLEW = 0x5; - RUSB2->DPUSR0R_FS_b.FIXPHY0 = 0u; /* USB_BASE Transceiver Output fixed */ + // leave CLKSEL as default (0x11) 24Mhz - #define USB_VDCEN (0x0080U) /* b7: Regulator ON/OFF control */ - RUSB2->USBMC = (uint16_t) (RUSB2->USBMC | (USB_VDCEN)); -#endif + // Power and reset UTMI Phy + uint16_t physet = (rusb->PHYSET | RUSB2_PHYSET_PLLRESET_Msk) & ~RUSB2_PHYSET_DIRPD_Msk; + rusb->PHYSET = physet; + R_BSP_SoftwareDelay((uint32_t) 1, BSP_DELAY_UNITS_MILLISECONDS); + rusb->PHYSET_b.PLLRESET = 0; + + // set UTMI to operating mode and wait for PLL lock confirmation + rusb->LPSTS_b.SUSPENDM = 1; + while (!rusb->PLLSTA_b.PLLLOCK) {} + + rusb->SYSCFG_b.DRPD = 0; + rusb->SYSCFG_b.USBE = 1; + + // Set CPU bus wait time (fine tunne later) + // rusb2->BUSWAIT |= 0x0F00U; + + rusb->PHYSET_b.REPSEL = 1; + + rusb->CFIFOSEL_b.MBW = 1; + rusb->D0FIFOSEL_b.MBW = 1; + rusb->D1FIFOSEL_b.MBW = 1; + } else { + rusb->SYSCFG_b.SCKE = 1; + while (!rusb->SYSCFG_b.SCKE) {} + rusb->SYSCFG_b.DRPD = 0; + rusb->SYSCFG_b.DCFM = 0; + rusb->SYSCFG_b.USBE = 1; + + // MCU specific PHY init + rusb2_phy_init(); + + rusb->PHYSLEW = 0x5; + rusb->DPUSR0R_FS_b.FIXPHY0 = 0u; /* USB_BASE Transceiver Output fixed */ + + // rusb2->USBMC = (uint16_t) (rusb2->USBMC | RUSB2_USBMC_VDCEN_Msk); + } /* Setup default control pipe */ - RUSB2->DCPMAXP_b.MXPS = 64; - RUSB2->INTENB0 = RUSB2_INTSTS0_VBINT_Msk | RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_BEMP_Msk | - RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_CTRT_Msk | (USE_SOF ? RUSB2_INTSTS0_SOFR_Msk : 0) | - RUSB2_INTSTS0_RESM_Msk | RUSB2_INTSTS0_NRDY_Msk; - RUSB2->BEMPENB = 1; - RUSB2->BRDYENB = 1; - -#if (CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE) - RUSB2->SYSCFG_b.DPRPU = 1; /* necessary in this position */ -#endif + rusb->DCPMAXP_b.MXPS = 64; + + rusb->INTSTS0 = 0; + rusb->INTENB0 = RUSB2_INTSTS0_VBINT_Msk | RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_BEMP_Msk | + RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_CTRT_Msk | (USE_SOF ? RUSB2_INTSTS0_SOFR_Msk : 0) | + RUSB2_INTSTS0_RESM_Msk | RUSB2_INTSTS0_NRDY_Msk; + rusb->BEMPENB = 1; + rusb->BRDYENB = 1; - if (RUSB2->INTSTS0_b.VBSTS) { + if (rusb->INTSTS0_b.VBSTS) { dcd_connect(rhport); } } @@ -697,24 +731,24 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) void dcd_remote_wakeup(uint8_t rhport) { - (void)rhport; - RUSB2->DVSTCTR0_b.WKUP = 1; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + rusb->DVSTCTR0_b.WKUP = 1; } void dcd_connect(uint8_t rhport) { - (void)rhport; - #if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) - RUSB2->SYSCFG_b.CNEN = 1; - R_BSP_SoftwareDelay((uint32_t) 10, BSP_DELAY_UNITS_MILLISECONDS); - #endif - RUSB2->SYSCFG_b.DPRPU = 1; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + + if ( is_highspeed(rhport)) { + rusb->SYSCFG_b.CNEN = 1; + } + rusb->SYSCFG_b.DPRPU = 1; } void dcd_disconnect(uint8_t rhport) { - (void)rhport; - RUSB2->SYSCFG_b.DPRPU = 0; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + rusb->SYSCFG_b.DPRPU = 0; } void dcd_sof_enable(uint8_t rhport, bool en) @@ -861,76 +895,94 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) //--------------------------------------------------------------------+ void dcd_int_handler(uint8_t rhport) { - (void)rhport; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + + uint16_t is0 = rusb->INTSTS0; - unsigned is0 = RUSB2->INTSTS0; /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ - RUSB2->INTSTS0 = ~((RUSB2_INTSTS0_CTRT_Msk | RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_SOFR_Msk | - RUSB2_INTSTS0_RESM_Msk | RUSB2_INTSTS0_VBINT_Msk) & is0) | RUSB2_INTSTS0_VALID_Msk; - if (is0 & RUSB2_INTSTS0_VBINT_Msk) { - if (RUSB2->INTSTS0_b.VBSTS) { + rusb->INTSTS0 = ~((RUSB2_INTSTS0_CTRT_Msk | RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_SOFR_Msk | + RUSB2_INTSTS0_RESM_Msk | RUSB2_INTSTS0_VBINT_Msk) & is0) | RUSB2_INTSTS0_VALID_Msk; + + // VBUS changes + if ( is0 & RUSB2_INTSTS0_VBINT_Msk ) { + if ( rusb->INTSTS0_b.VBSTS ) { dcd_connect(rhport); } else { dcd_disconnect(rhport); } } - if (is0 & RUSB2_INTSTS0_RESM_Msk) { + + // Resumed + if ( is0 & RUSB2_INTSTS0_RESM_Msk ) { dcd_event_bus_signal(rhport, DCD_EVENT_RESUME, true); -#if (0==USE_SOF) - RUSB2->INTENB0_b.SOFE = 0; +#if (0 == USE_SOF) + rusb->INTENB0_b.SOFE = 0; #endif } - if ((is0 & RUSB2_INTSTS0_SOFR_Msk) && RUSB2->INTENB0_b.SOFE) { + + // SOF received + if ( (is0 & RUSB2_INTSTS0_SOFR_Msk) && rusb->INTENB0_b.SOFE ) { // USBD will exit suspended mode when SOF event is received dcd_event_bus_signal(rhport, DCD_EVENT_SOF, true); #if (0 == USE_SOF) - RUSB2->INTENB0_b.SOFE = 0; + rusb->INTENB0_b.SOFE = 0; #endif } - if (is0 & RUSB2_INTSTS0_DVST_Msk) { + + // Device state changes + if ( is0 & RUSB2_INTSTS0_DVST_Msk ) { switch (is0 & RUSB2_INTSTS0_DVSQ_Msk) { - case RUSB2_INTSTS0_DVSQ_STATE_DEF: - process_bus_reset(rhport); - break; - case RUSB2_INTSTS0_DVSQ_STATE_ADDR: - process_set_address(rhport); - break; - case RUSB2_INTSTS0_DVSQ_STATE_SUSP0: - case RUSB2_INTSTS0_DVSQ_STATE_SUSP1: - case RUSB2_INTSTS0_DVSQ_STATE_SUSP2: - case RUSB2_INTSTS0_DVSQ_STATE_SUSP3: - dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); -#if (0==USE_SOF) - RUSB2->INTENB0_b.SOFE = 1; + case RUSB2_INTSTS0_DVSQ_STATE_DEF: + process_bus_reset(rhport); + break; + + case RUSB2_INTSTS0_DVSQ_STATE_ADDR: + process_set_address(rhport); + break; + + case RUSB2_INTSTS0_DVSQ_STATE_SUSP0: + case RUSB2_INTSTS0_DVSQ_STATE_SUSP1: + case RUSB2_INTSTS0_DVSQ_STATE_SUSP2: + case RUSB2_INTSTS0_DVSQ_STATE_SUSP3: + dcd_event_bus_signal(rhport, DCD_EVENT_SUSPEND, true); +#if (0 == USE_SOF) + rusb->INTENB0_b.SOFE = 1; #endif - default: - break; + + default: break; } } - if (is0 & RUSB2_INTSTS0_NRDY_Msk) { - RUSB2->NRDYSTS = 0; + + if ( is0 & RUSB2_INTSTS0_NRDY_Msk ) { + rusb->NRDYSTS = 0; } - if (is0 & RUSB2_INTSTS0_CTRT_Msk) { - if (is0 & RUSB2_INTSTS0_CTSQ_CTRL_RDATA) { + + // Control transfer stage changes + if ( is0 & RUSB2_INTSTS0_CTRT_Msk ) { + if ( is0 & RUSB2_INTSTS0_CTSQ_CTRL_RDATA ) { /* A setup packet has been received. */ process_setup_packet(rhport); - } else if (0 == (is0 & RUSB2_INTSTS0_CTSQ_Msk)) { + } else if ( 0 == (is0 & RUSB2_INTSTS0_CTSQ_Msk) ) { /* A ZLP has been sent/received. */ process_status_completion(rhport); } } - if (is0 & RUSB2_INTSTS0_BEMP_Msk) { - const unsigned s = RUSB2->BEMPSTS; - RUSB2->BEMPSTS = 0; - if (s & 1) { + + // Buffer empty + if ( is0 & RUSB2_INTSTS0_BEMP_Msk ) { + const unsigned s = rusb->BEMPSTS; + rusb->BEMPSTS = 0; + if ( s & 1 ) { process_pipe0_bemp(rhport); } } - if (is0 & RUSB2_INTSTS0_BRDY_Msk) { - const unsigned m = RUSB2->BRDYENB; - unsigned s = RUSB2->BRDYSTS & m; + + // Buffer ready + if ( is0 & RUSB2_INTSTS0_BRDY_Msk ) { + const unsigned m = rusb->BRDYENB; + unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ - RUSB2->BRDYSTS = ~s; + rusb->BRDYSTS = ~s; while (s) { #if defined(__CCRX__) static const int Mod37BitPosition[] = { diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index ca7c38907..0dc59331a 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -76,38 +76,34 @@ static rusb2_controller_t rusb2_controller[] = { #endif }; -TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) -{ - #if RUSB2_CONTROLLER_COUNT > 1 +#define RUSB2_REG(_p) ((rusb2_reg_t*) rusb2_controller[_p].reg_base) + +TU_ATTR_ALWAYS_INLINE static inline void rusb2_module_start(uint8_t rhport, bool start) { + uint32_t const mask = 1U << (11+rhport); + if (start) { + R_MSTP->MSTPCRB &= ~mask; + }else { + R_MSTP->MSTPCRB |= mask; + } +} + +TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) { NVIC_EnableIRQ(rusb2_controller[rhport].irqnum); - #else - (void) rhport; - NVIC_EnableIRQ(rusb2_controller[0].irqnum); - #endif } -TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_disable(uint8_t rhport) -{ - #if RUSB2_CONTROLLER_COUNT > 1 +TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_disable(uint8_t rhport) { NVIC_DisableIRQ(rusb2_controller[rhport].irqnum); - #else - (void) rhport; - NVIC_DisableIRQ(rusb2_controller[0].irqnum); - #endif } // MCU specific PHY init -TU_ATTR_ALWAYS_INLINE static inline void rusb2_phy_init(void) -{ +TU_ATTR_ALWAYS_INLINE static inline void rusb2_phy_init(void) { } +//--------------------------------------------------------------------+ +// Application API for setting IRQ number +//--------------------------------------------------------------------+ void tud_int_set_irqnum(uint8_t rhport, int32_t irqnum) { - #if RUSB2_CONTROLLER_COUNT > 1 rusb2_controller[rhport].irqnum = irqnum; - #else - (void) rhport; - rusb2_controller[0].irqnum = irqnum; - #endif } #ifdef __cplusplus diff --git a/src/portable/renesas/rusb2/rusb2_rx.h b/src/portable/renesas/rusb2/rusb2_rx.h index 397c0d56c..d7f4e0b42 100644 --- a/src/portable/renesas/rusb2/rusb2_rx.h +++ b/src/portable/renesas/rusb2/rusb2_rx.h @@ -37,6 +37,12 @@ extern "C" { #define RUSB2_REG_BASE (0x000A0000) +// Start/Stop MSTP TODO implement later +TU_ATTR_ALWAYS_INLINE static inline void rusb2_module_start(uint8_t rhport, bool start) { + (void) rhport; + (void) start; +} + TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_enable(uint8_t rhport) { (void) rhport; diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index 0928f5aeb..b704626f6 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -1653,6 +1653,7 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_DVSTCTR0_RHST_LS (1U << RUSB2_DVSTCTR0_RHST_Pos) /* Low-speed connection */ #define RUSB2_DVSTCTR0_RHST_FS (2U << RUSB2_DVSTCTR0_RHST_Pos) /* Full-speed connection */ +#define RUSB2_DVSTCTR0_RHST_HS (3U << RUSB2_DVSTCTR0_RHST_Pos) /* Full-speed connection */ #define RUSB2_DEVADD_USBSPD_LS (1U << RUSB2_DEVADD_USBSPD_Pos) /* Target Device Low-speed */ #define RUSB2_DEVADD_USBSPD_FS (2U << RUSB2_DEVADD_USBSPD_Pos) /* Target Device Full-speed */ -- cgit v1.3.1 From 1eefc2b3ef2e268e839002a8b5221eebe26f6cd3 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Jul 2023 19:35:42 +0700 Subject: more multiple ports update --- src/portable/renesas/rusb2/dcd_rusb2.c | 344 ++++++++++++++++++-------------- src/portable/renesas/rusb2/rusb2_rx.h | 2 + src/portable/renesas/rusb2/rusb2_type.h | 9 +- 3 files changed, 208 insertions(+), 147 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 27d525b68..833737181 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -63,22 +63,11 @@ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -/* LINK core registers */ -#if defined(__CCRX__) - #define RUSB2 ((rusb2_reg_t __evenaccess*) RUSB2_REG_BASE) -#elif defined(__RX__) - #define RUSB2 ((rusb2_reg_t*) RUSB2_REG_BASE) -#elif (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) - #define RUSB2 ((R_USB_HS0_Type*)R_USB_HS0_BASE) -#else - #define RUSB2 ((R_USB_FS0_Type*)R_USB_FS0_BASE) -#endif - /* Start of definition of packed structs (used by the CCRX toolchain) */ TU_ATTR_PACKED_BEGIN TU_ATTR_BIT_FIELD_ORDER_BEGIN -typedef struct TU_ATTR_PACKED { +typedef struct TU_ATTR_PACKED _ccrx_evenaccess { union { struct { uint16_t : 8; @@ -186,52 +175,53 @@ static unsigned find_pipe(unsigned xfer) return 0; } -static volatile uint16_t* get_pipectr(unsigned num) +static volatile uint16_t* get_pipectr(rusb2_reg_t *rusb, unsigned num) { if (num) { - return (volatile uint16_t*)&(RUSB2->PIPE_CTR[num - 1]); + return (volatile uint16_t*)&(rusb->PIPE_CTR[num - 1]); } else { - return (volatile uint16_t*)&(RUSB2->DCPCTR); + return (volatile uint16_t*)&(rusb->DCPCTR); } } -static volatile reg_pipetre_t* get_pipetre(unsigned num) +static volatile reg_pipetre_t* get_pipetre(rusb2_reg_t *rusb, unsigned num) { volatile reg_pipetre_t* tre = NULL; if ((1 <= num) && (num <= 5)) { - tre = (volatile reg_pipetre_t*)&(RUSB2->PIPE_TR[num - 1].E); + tre = (volatile reg_pipetre_t*)&(rusb->PIPE_TR[num - 1].E); } return tre; } static volatile uint16_t* ep_addr_to_pipectr(uint8_t rhport, unsigned ep_addr) { - (void)rhport; + rusb2_reg_t *rusb = RUSB2_REG(rhport); const unsigned epn = tu_edpt_number(ep_addr); + if (epn) { const unsigned dir = tu_edpt_dir(ep_addr); const unsigned num = _dcd.ep[dir][epn]; - return get_pipectr(num); + return get_pipectr(rusb, num); } else { - return get_pipectr(0); + return get_pipectr(rusb, 0); } } -static unsigned edpt0_max_packet_size(void) +static uint16_t edpt0_max_packet_size(rusb2_reg_t* rusb) { - return RUSB2->DCPMAXP_b.MXPS; + return rusb->DCPMAXP_b.MXPS; } -static unsigned edpt_max_packet_size(unsigned num) +static uint16_t edpt_max_packet_size(rusb2_reg_t *rusb, unsigned num) { - RUSB2->PIPESEL = num; - return RUSB2->PIPEMAXP; + rusb->PIPESEL = num; + return rusb->PIPEMAXP; } -static inline void pipe_wait_for_ready(unsigned num) +static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) { - while (RUSB2->D0FIFOSEL_b.CURPIPE != num) ; - while (!RUSB2->D0FIFOCTR_b.FRDY) ; + while ( rusb->D0FIFOSEL_b.CURPIPE != num ) {} + while ( !rusb->D0FIFOCTR_b.FRDY ) {} } static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) @@ -284,61 +274,70 @@ static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigne ops[dir].tu_fifo_advance(f, total_len - rem); } -static bool pipe0_xfer_in(void) +static bool pipe0_xfer_in(rusb2_reg_t* rusb) { pipe_state_t *pipe = &_dcd.pipe[0]; const unsigned rem = pipe->remaining; + if (!rem) { pipe->buf = NULL; return true; } - const unsigned mps = edpt0_max_packet_size(); - const unsigned len = TU_MIN(mps, rem); + + const uint16_t mps = edpt0_max_packet_size(rusb); + const uint16_t len = tu_min16(mps, rem); void *buf = pipe->buf; + if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->CFIFO, len, TUSB_DIR_IN); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len, TUSB_DIR_IN); } else { - pipe_write_packet(buf, (volatile void*)&RUSB2->CFIFO, len); + pipe_write_packet(buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } } + if (len < mps) { - RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } + pipe->remaining = rem - len; return false; } -static bool pipe0_xfer_out(void) +static bool pipe0_xfer_out(rusb2_reg_t* rusb) { pipe_state_t *pipe = &_dcd.pipe[0]; const unsigned rem = pipe->remaining; - const unsigned mps = edpt0_max_packet_size(); - const unsigned vld = RUSB2->CFIFOCTR_b.DTLN; - const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); + const uint16_t mps = edpt0_max_packet_size(rusb); + const uint16_t vld = rusb->CFIFOCTR_b.DTLN; + const uint16_t len = tu_min16(tu_min16(rem, mps), vld); void *buf = pipe->buf; + if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->CFIFO, len, TUSB_DIR_OUT); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len, TUSB_DIR_OUT); } else { - pipe_read_packet(buf, (volatile void*)&RUSB2->CFIFO, len); + pipe_read_packet(buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } } + if (len < mps) { - RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + rusb->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } + pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { pipe->buf = NULL; return true; } + return false; } -static bool pipe_xfer_in(unsigned num) +static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) { pipe_state_t *pipe = &_dcd.pipe[num]; const unsigned rem = pipe->remaining; @@ -348,119 +347,141 @@ static bool pipe_xfer_in(unsigned num) return true; } - RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); - const unsigned len = TU_MIN(rem, mps); + rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); + const uint16_t mps = edpt_max_packet_size(rusb, num); + pipe_wait_for_ready(rusb, num); + const uint16_t len = tu_min16(rem, mps); void *buf = pipe->buf; + if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->D0FIFO, len, TUSB_DIR_IN); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len, TUSB_DIR_IN); } else { - pipe_write_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); + pipe_write_packet(buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } } + if (len < mps) { - RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } - RUSB2->D0FIFOSEL = 0; - while (RUSB2->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + + rusb->D0FIFOSEL = 0; + while (rusb->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + pipe->remaining = rem - len; + return false; } -static bool pipe_xfer_out(unsigned num) +static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) { pipe_state_t *pipe = &_dcd.pipe[num]; - const unsigned rem = pipe->remaining; + const uint16_t rem = pipe->remaining; - RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); - const unsigned vld = RUSB2->D0FIFOCTR_b.DTLN; - const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); + rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; + const uint16_t mps = edpt_max_packet_size(rusb, num); + pipe_wait_for_ready(rusb, num); + + const uint16_t vld = rusb->D0FIFOCTR_b.DTLN; + const uint16_t len = tu_min16(tu_min16(rem, mps), vld); void *buf = pipe->buf; + if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&RUSB2->D0FIFO, len, TUSB_DIR_OUT); + pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len, TUSB_DIR_OUT); } else { - pipe_read_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); + pipe_read_packet(buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } } + if (len < mps) { - RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } - RUSB2->D0FIFOSEL = 0; - while (RUSB2->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + + rusb->D0FIFOSEL = 0; + while (rusb->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { pipe->buf = NULL; return NULL != buf; } + return false; } static void process_setup_packet(uint8_t rhport) { - uint16_t setup_packet[4]; - if (0 == (RUSB2->INTSTS0 & RUSB2_INTSTS0_VALID_Msk)) return; - RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; - setup_packet[0] = tu_le16toh(RUSB2->USBREQ); - setup_packet[1] = RUSB2->USBVAL; - setup_packet[2] = RUSB2->USBINDX; - setup_packet[3] = RUSB2->USBLENG; - RUSB2->INTSTS0 = ~((uint16_t)RUSB2_INTSTS0_VALID_Msk); + rusb2_reg_t* rusb = RUSB2_REG(rhport); + if (0 == (rusb->INTSTS0 & RUSB2_INTSTS0_VALID_Msk)) return; + + rusb->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + uint16_t setup_packet[4] = { + tu_htole16(rusb->USBREQ), + tu_htole16(rusb->USBVAL), + tu_htole16(rusb->USBINDX), + tu_htole16(rusb->USBLENG) + }; + + rusb->INTSTS0 = ~((uint16_t) RUSB2_INTSTS0_VALID_Msk); dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet[0], true); } static void process_status_completion(uint8_t rhport) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); uint8_t ep_addr; /* Check the data stage direction */ - if (RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) { + if (rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) { /* IN transfer. */ ep_addr = tu_edpt_addr(0, TUSB_DIR_IN); } else { /* OUT transfer. */ ep_addr = tu_edpt_addr(0, TUSB_DIR_OUT); } + dcd_event_xfer_complete(rhport, ep_addr, 0, XFER_RESULT_SUCCESS, true); } -static bool process_pipe0_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) +static bool process_pipe0_xfer(rusb2_reg_t* rusb, int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) { /* configure fifo direction and access unit settings */ - if (ep_addr) { /* IN, 2 bytes */ - RUSB2->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | - (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - while (!(RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) ; - } else { /* OUT, a byte */ - RUSB2->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; - while (RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ; + if ( ep_addr ) { + /* IN, 2 bytes */ + rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | + (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); + while ( !(rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ) {} + } else { + /* OUT, a byte */ + rusb->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; + while ( rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE ) {} } pipe_state_t *pipe = &_dcd.pipe[0]; pipe->ff = buffer_type; pipe->length = total_bytes; pipe->remaining = total_bytes; - if (total_bytes) { - pipe->buf = buffer; - if (ep_addr) { /* IN */ - TU_ASSERT(RUSB2->DCPCTR_b.BSTS && (RUSB2->USBREQ & 0x80)); - pipe0_xfer_in(); + + if ( total_bytes ) { + pipe->buf = buffer; + if ( ep_addr ) { + /* IN */ + TU_ASSERT(rusb->DCPCTR_b.BSTS && (rusb->USBREQ & 0x80)); + pipe0_xfer_in(rusb); } - RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; } else { /* ZLP */ - pipe->buf = NULL; - RUSB2->DCPCTR = RUSB2_DCPCTR_CCPL_Msk | RUSB2_PIPE_CTR_PID_BUF; + pipe->buf = NULL; + rusb->DCPCTR = RUSB2_DCPCTR_CCPL_Msk | RUSB2_PIPE_CTR_PID_BUF; } + return true; } -static bool process_pipe_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) +static bool process_pipe_xfer(rusb2_reg_t* rusb, int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) { const unsigned epn = tu_edpt_number(ep_addr); const unsigned dir = tu_edpt_dir(ep_addr); @@ -473,49 +494,55 @@ static bool process_pipe_xfer(int buffer_type, uint8_t ep_addr, void* buffer, ui pipe->buf = buffer; pipe->length = total_bytes; pipe->remaining = total_bytes; - if (dir) { /* IN */ + + if (dir) { + /* IN */ if (total_bytes) { - pipe_xfer_in(num); - } else { /* ZLP */ - RUSB2->D0FIFOSEL = num; - pipe_wait_for_ready(num); - RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; - RUSB2->D0FIFOSEL = 0; - while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + pipe_xfer_in(rusb, num); + } else { + /* ZLP */ + rusb->D0FIFOSEL = num; + pipe_wait_for_ready(rusb, num); + rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->D0FIFOSEL = 0; + /* if CURPIPE bits changes, check written value */ + while (rusb->D0FIFOSEL_b.CURPIPE) {} } } else { -#if defined(__CCRX__) - __evenaccess volatile reg_pipetre_t *pt = get_pipetre(num); -#else - volatile reg_pipetre_t *pt = get_pipetre(num); -#endif + // OUT + volatile reg_pipetre_t *pt = get_pipetre(rusb, num); + if (pt) { - const unsigned mps = edpt_max_packet_size(num); - volatile uint16_t *ctr = get_pipectr(num); + const uint16_t mps = edpt_max_packet_size(rusb, num); + volatile uint16_t *ctr = get_pipectr(rusb, num); + if (*ctr & 0x3) *ctr = RUSB2_PIPE_CTR_PID_NAK; + pt->TRE = TU_BIT(8); pt->TRN = (total_bytes + mps - 1) / mps; pt->TRENB = 1; *ctr = RUSB2_PIPE_CTR_PID_BUF; } } - // TU_LOG1("X %x %d %d\r\n", ep_addr, total_bytes, buffer_type); + + // TU_LOG2("X %x %d %d\r\n", ep_addr, total_bytes, buffer_type); return true; } -static bool process_edpt_xfer(int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) +static bool process_edpt_xfer(rusb2_reg_t* rusb, int buffer_type, uint8_t ep_addr, void* buffer, uint16_t total_bytes) { const unsigned epn = tu_edpt_number(ep_addr); if (0 == epn) { - return process_pipe0_xfer(buffer_type, ep_addr, buffer, total_bytes); + return process_pipe0_xfer(rusb, buffer_type, ep_addr, buffer, total_bytes); } else { - return process_pipe_xfer(buffer_type, ep_addr, buffer, total_bytes); + return process_pipe_xfer(rusb, buffer_type, ep_addr, buffer, total_bytes); } } static void process_pipe0_bemp(uint8_t rhport) { - bool completed = pipe0_xfer_in(); + rusb2_reg_t* rusb = RUSB2_REG(rhport); + bool completed = pipe0_xfer_in(rusb); if (completed) { pipe_state_t *pipe = &_dcd.pipe[0]; dcd_event_xfer_complete(rhport, tu_edpt_addr(0, TUSB_DIR_IN), @@ -525,17 +552,20 @@ static void process_pipe0_bemp(uint8_t rhport) static void process_pipe_brdy(uint8_t rhport, unsigned num) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); pipe_state_t *pipe = &_dcd.pipe[num]; const unsigned dir = tu_edpt_dir(pipe->ep); bool completed; - if (dir) { /* IN */ - completed = pipe_xfer_in(num); + if (dir) { + /* IN */ + completed = pipe_xfer_in(rusb, num); } else { + // OUT if (num) { - completed = pipe_xfer_out(num); + completed = pipe_xfer_out(rusb, num); } else { - completed = pipe0_xfer_out(); + completed = pipe0_xfer_out(rusb); } } if (completed) { @@ -606,8 +636,10 @@ static void process_bus_reset(uint8_t rhport) static void process_set_address(uint8_t rhport) { - const uint32_t addr = RUSB2->USBADDR & 0xFF; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + const uint32_t addr = rusb->USBADDR & 0xFF; if (!addr) return; + const tusb_control_request_t setup_packet = { #if defined(__CCRX__) .bmRequestType = { 0 }, /* Note: CCRX needs the braces over this struct member */ @@ -618,8 +650,9 @@ static void process_set_address(uint8_t rhport) .wValue = addr, .wIndex = 0, .wLength = 0, - }; - dcd_event_setup_received(rhport, (const uint8_t*)&setup_packet, true); + }; + + dcd_event_setup_received(rhport, (const uint8_t *) &setup_packet, true); } /*------------------------------------------------------------------*/ @@ -704,7 +737,7 @@ void dcd_init(uint8_t rhport) rusb->INTSTS0 = 0; rusb->INTENB0 = RUSB2_INTSTS0_VBINT_Msk | RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_BEMP_Msk | RUSB2_INTSTS0_DVST_Msk | RUSB2_INTSTS0_CTRT_Msk | (USE_SOF ? RUSB2_INTSTS0_SOFR_Msk : 0) | - RUSB2_INTSTS0_RESM_Msk | RUSB2_INTSTS0_NRDY_Msk; + RUSB2_INTSTS0_RESM_Msk; rusb->BEMPENB = 1; rusb->BRDYENB = 1; @@ -766,33 +799,43 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) { (void)rhport; + rusb2_reg_t * rusb = RUSB2_REG(rhport); const unsigned ep_addr = ep_desc->bEndpointAddress; const unsigned epn = tu_edpt_number(ep_addr); const unsigned dir = tu_edpt_dir(ep_addr); const unsigned xfer = ep_desc->bmAttributes.xfer; const unsigned mps = tu_edpt_packet_size(ep_desc); - if (xfer == TUSB_XFER_ISOCHRONOUS && mps > 256) { - /* USBa supports up to 256 bytes */ - return false; + + if (xfer == TUSB_XFER_ISOCHRONOUS) { + // Fullspeed ISO is limit to 256 bytes + if ( !is_highspeed(rhport) && mps > 256) { + return false; + } } const unsigned num = find_pipe(xfer); - if (!num) return false; + TU_ASSERT(num); + _dcd.pipe[num].ep = ep_addr; _dcd.ep[dir][epn] = num; /* setup pipe */ dcd_int_disable(rhport); - #if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) - RUSB2->PIPEBUF = 0x7C08; - #endif - RUSB2->PIPESEL = num; - RUSB2->PIPEMAXP = mps; - volatile uint16_t *ctr = get_pipectr(num); + + if ( is_highspeed(rhport) ) { + // FIXME shouldn't be after pipe selection and config, also the BUFNMB should be changed + // depending on the allocation scheme + rusb->PIPEBUF = 0x7C08; + } + + rusb->PIPESEL = num; + rusb->PIPEMAXP = mps; + volatile uint16_t *ctr = get_pipectr(rusb, num); *ctr = RUSB2_PIPE_CTR_ACLRM_Msk | RUSB2_PIPE_CTR_SQCLR_Msk; *ctr = 0; unsigned cfg = (dir << 4) | epn; + if (xfer == TUSB_XFER_BULK) { cfg |= (RUSB2_PIPECFG_TYPE_BULK | RUSB2_PIPECFG_SHTNAK_Msk | RUSB2_PIPECFG_DBLB_Msk); } else if (xfer == TUSB_XFER_INTERRUPT) { @@ -800,13 +843,16 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) } else { cfg |= (RUSB2_PIPECFG_TYPE_ISO | RUSB2_PIPECFG_DBLB_Msk); } - RUSB2->PIPECFG = cfg; - RUSB2->BRDYSTS = 0x1FFu ^ TU_BIT(num); - RUSB2->BRDYENB |= TU_BIT(num); + + rusb->PIPECFG = cfg; + rusb->BRDYSTS = 0x1FFu ^ TU_BIT(num); + rusb->BRDYENB |= TU_BIT(num); + if (dir || (xfer != TUSB_XFER_BULK)) { *ctr = RUSB2_PIPE_CTR_PID_BUF; } - // TU_LOG1("O %d %x %x\r\n", RUSB2->PIPESEL, RUSB2->PIPECFG, RUSB2->PIPEMAXP); + + // TU_LOG1("O %d %x %x\r\n", rusb->PIPESEL, rusb->PIPECFG, rusb->PIPEMAXP); dcd_int_enable(rhport); return true; @@ -826,26 +872,28 @@ void dcd_edpt_close_all(uint8_t rhport) void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) { - (void)rhport; + rusb2_reg_t * rusb = RUSB2_REG(rhport); const unsigned epn = tu_edpt_number(ep_addr); const unsigned dir = tu_edpt_dir(ep_addr); const unsigned num = _dcd.ep[dir][epn]; - RUSB2->BRDYENB &= ~TU_BIT(num); - volatile uint16_t *ctr = get_pipectr(num); + rusb->BRDYENB &= ~TU_BIT(num); + volatile uint16_t *ctr = get_pipectr(rusb, num); *ctr = 0; - RUSB2->PIPESEL = num; - RUSB2->PIPECFG = 0; + rusb->PIPESEL = num; + rusb->PIPECFG = 0; _dcd.pipe[num].ep = 0; _dcd.ep[dir][epn] = 0; } bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { - bool r; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + dcd_int_disable(rhport); - r = process_edpt_xfer(0, ep_addr, buffer, total_bytes); + bool r = process_edpt_xfer(rusb, 0, ep_addr, buffer, total_bytes); dcd_int_enable(rhport); + return r; } @@ -853,10 +901,12 @@ bool dcd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_ { // USB buffers always work in bytes so to avoid unnecessary divisions we demand item_size = 1 TU_ASSERT(ff->item_size == 1); - bool r; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + dcd_int_disable(rhport); - r = process_edpt_xfer(1, ep_addr, ff, total_bytes); + bool r = process_edpt_xfer(rusb, 1, ep_addr, ff, total_bytes); dcd_int_enable(rhport); + return r; } @@ -873,8 +923,10 @@ void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr) void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) { + rusb2_reg_t * rusb = RUSB2_REG(rhport); volatile uint16_t *ctr = ep_addr_to_pipectr(rhport, ep_addr); if (!ctr) return; + dcd_int_disable(rhport); *ctr = RUSB2_PIPE_CTR_SQCLR_Msk; @@ -882,8 +934,8 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) *ctr = RUSB2_PIPE_CTR_PID_BUF; } else { const unsigned num = _dcd.ep[0][tu_edpt_number(ep_addr)]; - RUSB2->PIPESEL = num; - if (RUSB2->PIPECFG_b.TYPE != 1) { + rusb->PIPESEL = num; + if (rusb->PIPECFG_b.TYPE != 1) { *ctr = RUSB2_PIPE_CTR_PID_BUF; } } @@ -953,9 +1005,9 @@ void dcd_int_handler(uint8_t rhport) } } - if ( is0 & RUSB2_INTSTS0_NRDY_Msk ) { - rusb->NRDYSTS = 0; - } +// if ( is0 & RUSB2_INTSTS0_NRDY_Msk ) { +// rusb->NRDYSTS = 0; +// } // Control transfer stage changes if ( is0 & RUSB2_INTSTS0_CTRT_Msk ) { @@ -970,7 +1022,7 @@ void dcd_int_handler(uint8_t rhport) // Buffer empty if ( is0 & RUSB2_INTSTS0_BEMP_Msk ) { - const unsigned s = rusb->BEMPSTS; + const uint16_t s = rusb->BEMPSTS; rusb->BEMPSTS = 0; if ( s & 1 ) { process_pipe0_bemp(rhport); diff --git a/src/portable/renesas/rusb2/rusb2_rx.h b/src/portable/renesas/rusb2/rusb2_rx.h index d7f4e0b42..21b2527c3 100644 --- a/src/portable/renesas/rusb2/rusb2_rx.h +++ b/src/portable/renesas/rusb2/rusb2_rx.h @@ -37,6 +37,8 @@ extern "C" { #define RUSB2_REG_BASE (0x000A0000) +#define RUSB2_REG(_p) ((rusb2_reg_t *) RUSB2_REG_BASE) + // Start/Stop MSTP TODO implement later TU_ATTR_ALWAYS_INLINE static inline void rusb2_module_start(uint8_t rhport, bool start) { (void) rhport; diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index b704626f6..7a5e37089 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -33,6 +33,13 @@ extern "C" { #endif +// CCRX specific attribute to generate a Code that Accesses Variables in the Declared Size +#ifdef __CCRX__ + #define _ccrx_evenaccess __evenaccess +#else + #define _ccrx_evenaccess +#endif + /*--------------------------------------------------------------------*/ /* Register Definitions */ /*--------------------------------------------------------------------*/ @@ -64,7 +71,7 @@ typedef struct { /* RUSB2 Registers Structure */ -typedef struct { +typedef struct _ccrx_evenaccess { union { volatile uint16_t SYSCFG; /* (@ 0x00000000) System Configuration Control Register */ -- cgit v1.3.1 From c53acb145589e2733b7d1abe012e85ae590bffb7 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Jul 2023 20:10:58 +0700 Subject: fix build with rx --- src/portable/renesas/rusb2/dcd_rusb2.c | 37 +++++++++++++++++++--------------- src/portable/renesas/rusb2/rusb2_ra.h | 4 ++-- src/portable/renesas/rusb2/rusb2_rx.h | 5 ++++- 3 files changed, 27 insertions(+), 19 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 833737181..81b60b3bc 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -36,12 +36,6 @@ #include "device/dcd.h" #include "rusb2_type.h" -#if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) -// fallback -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE -#define CFG_TUSB_RHPORT1_MODE 0 -#endif - #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) #include "rusb2_rx.h" #elif TU_CHECK_MCU(OPT_MCU_RAXXX) @@ -86,7 +80,7 @@ typedef union TU_ATTR_PACKED { volatile uint8_t reserved8; }; volatile uint16_t u16; -} hw_fifo_t; +} hw_fifo16_t; typedef union TU_ATTR_PACKED { struct { @@ -140,9 +134,11 @@ static dcd_data_t _dcd; // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline bool is_highspeed(uint8_t rhport) { - return rhport == 1; -} +#ifdef RUSB2_SUPPORT_HIGHSPEED + #define is_highspeed_usbip(_p) (_p == 1) +#else + #define is_highspeed_usbip(_p) (false) +#endif static unsigned find_pipe(unsigned xfer) { @@ -229,14 +225,17 @@ static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) #if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) volatile hw_fifo32_t *reg = (volatile hw_fifo32_t*) fifo; #else - volatile hw_fifo_t *reg = (volatile hw_fifo_t*) fifo; + volatile hw_fifo16_t *reg = (volatile hw_fifo16_t*) fifo; #endif + uintptr_t addr = (uintptr_t)buf; + while (len >= 2) { reg->u16 = *(const uint16_t *)addr; addr += 2; len -= 2; } + if (len > 0) { reg->u8 = *(const uint8_t *)addr; ++addr; @@ -260,11 +259,14 @@ static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigne /* OUT */ {tu_fifo_get_write_info,tu_fifo_advance_write_pointer,pipe_read_packet}, /* IN */ {tu_fifo_get_read_info, tu_fifo_advance_read_pointer, pipe_write_packet}, }; + tu_fifo_buffer_info_t info; ops[dir].tu_fifo_get_info(f, &info); + unsigned total_len = len; len = TU_MIN(total_len, info.len_lin); ops[dir].pipe_read_write(info.ptr_lin, fifo, len); + unsigned rem = total_len - len; if (rem) { len = TU_MIN(rem, info.len_wrap); @@ -689,7 +691,8 @@ void dcd_init(uint8_t rhport) rusb2_module_start(rhport, true); - if ( is_highspeed(rhport) ) { +#ifdef RUSB2_SUPPORT_HIGHSPEED + if ( is_highspeed_usbip(rhport) ) { rusb->SYSCFG_b.HSE = 1; // leave CLKSEL as default (0x11) 24Mhz @@ -715,7 +718,9 @@ void dcd_init(uint8_t rhport) rusb->CFIFOSEL_b.MBW = 1; rusb->D0FIFOSEL_b.MBW = 1; rusb->D1FIFOSEL_b.MBW = 1; - } else { + } else +#endif + { rusb->SYSCFG_b.SCKE = 1; while (!rusb->SYSCFG_b.SCKE) {} rusb->SYSCFG_b.DRPD = 0; @@ -772,7 +777,7 @@ void dcd_connect(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - if ( is_highspeed(rhport)) { + if ( is_highspeed_usbip(rhport)) { rusb->SYSCFG_b.CNEN = 1; } rusb->SYSCFG_b.DPRPU = 1; @@ -809,7 +814,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) if (xfer == TUSB_XFER_ISOCHRONOUS) { // Fullspeed ISO is limit to 256 bytes - if ( !is_highspeed(rhport) && mps > 256) { + if ( !is_highspeed_usbip(rhport) && mps > 256) { return false; } } @@ -823,7 +828,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) /* setup pipe */ dcd_int_disable(rhport); - if ( is_highspeed(rhport) ) { + if ( is_highspeed_usbip(rhport) ) { // FIXME shouldn't be after pipe selection and config, also the BUFNMB should be changed // depending on the allocation scheme rusb->PIPEBUF = 0x7C08; diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 0dc59331a..e04a99685 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -62,7 +62,7 @@ typedef struct { }rusb2_controller_t; #if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) - #define RUSB2_HAS_HIGHSPEED + #define RUSB2_SUPPORT_HIGHSPEED #define RUSB2_CONTROLLER_COUNT 2 #else #define RUSB2_CONTROLLER_COUNT 1 @@ -71,7 +71,7 @@ typedef struct { // USBFS_INT_IRQn and USBHS_USB_INT_RESUME_IRQn are generated by FSP static rusb2_controller_t rusb2_controller[] = { { .reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn }, - #ifdef RUSB2_HAS_HIGHSPEED + #ifdef RUSB2_SUPPORT_HIGHSPEED { .reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn }, #endif }; diff --git a/src/portable/renesas/rusb2/rusb2_rx.h b/src/portable/renesas/rusb2/rusb2_rx.h index 21b2527c3..17b9a918c 100644 --- a/src/portable/renesas/rusb2/rusb2_rx.h +++ b/src/portable/renesas/rusb2/rusb2_rx.h @@ -37,7 +37,10 @@ extern "C" { #define RUSB2_REG_BASE (0x000A0000) -#define RUSB2_REG(_p) ((rusb2_reg_t *) RUSB2_REG_BASE) +TU_ATTR_ALWAYS_INLINE static inline rusb2_reg_t* RUSB2_REG(uint8_t rhport) { + (void) rhport; + return (rusb2_reg_t *) RUSB2_REG_BASE; +} // Start/Stop MSTP TODO implement later TU_ATTR_ALWAYS_INLINE static inline void rusb2_module_start(uint8_t rhport, bool start) { -- cgit v1.3.1 From 4c156100fafa682407f1a9a459d8b8800a029446 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Jul 2023 12:27:18 +0700 Subject: use unaligned access read for hw fifo --- src/common/tusb_common.h | 18 ++++++-- src/common/tusb_mcu.h | 12 ++++-- src/portable/renesas/rusb2/dcd_rusb2.c | 77 +++++++++++++++++++++------------- 3 files changed, 71 insertions(+), 36 deletions(-) (limited to 'src') diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 957491aa9..576cb123f 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -260,11 +260,21 @@ TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16(void* mem, uint16_ #else // MCU that could access unaligned memory natively -TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_unaligned_read32 (const void* mem) { return *((uint32_t const *) mem); } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_unaligned_read16 (const void* mem) { return *((uint16_t const *) mem); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_unaligned_read32(const void *mem) { + return *((uint32_t const *) mem); +} + +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_unaligned_read16(const void *mem) { + return *((uint16_t const *) mem); +} -TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write32 (void* mem, uint32_t value ) { *((uint32_t*) mem) = value; } -TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16 (void* mem, uint16_t value ) { *((uint16_t*) mem) = value; } +TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write32(void *mem, uint32_t value) { + *((uint32_t *) mem) = value; +} + +TU_ATTR_ALWAYS_INLINE static inline void tu_unaligned_write16(void *mem, uint16_t value) { + *((uint16_t *) mem) = value; +} #endif diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 496ebfc85..89f89182e 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -34,10 +34,16 @@ //------------- Unaligned Memory Access -------------// -// ARMv7+ (M3-M7, M23-M33) can access unaligned memory -#if (defined(__ARM_ARCH) && (__ARM_ARCH >= 7)) - #define TUP_ARCH_STRICT_ALIGN 0 +#ifdef __ARM_ARCH + // ARM Architecture set __ARM_FEATURE_UNALIGNED to 1 for mcu supports unaligned access + #if defined(__ARM_FEATURE_UNALIGNED) && __ARM_FEATURE_UNALIGNED == 1 + #define TUP_ARCH_STRICT_ALIGN 0 + #else + #define TUP_ARCH_STRICT_ALIGN 1 + #endif #else + // TODO default to strict align for others + // Should investigate other architecture such as risv, xtensa, mips for optimal setting #define TUP_ARCH_STRICT_ALIGN 1 #endif diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 81b60b3bc..464929224 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -220,6 +220,11 @@ static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) while ( !rusb->D0FIFOCTR_b.FRDY ) {} } +//--------------------------------------------------------------------+ +// Pipe FIFO +//--------------------------------------------------------------------+ + +// Write data buffer --> hw fifo static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) { #if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) @@ -228,54 +233,68 @@ static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) volatile hw_fifo16_t *reg = (volatile hw_fifo16_t*) fifo; #endif - uintptr_t addr = (uintptr_t)buf; + uint8_t const* buf8 = (uint8_t const*) buf; while (len >= 2) { - reg->u16 = *(const uint16_t *)addr; - addr += 2; + reg->u16 = tu_unaligned_read16(buf8); + buf8 += 2; len -= 2; } if (len > 0) { - reg->u8 = *(const uint8_t *)addr; - ++addr; + reg->u8 = *buf8; + ++buf8; } } +// Read data buffer <-- hw fifo static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) { - uint8_t *p = (uint8_t*)buf; + uint8_t *p = (uint8_t*)buf; volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ while (len--) *p++ = *reg; } -static void pipe_read_write_packet_ff(tu_fifo_t *f, volatile void *fifo, unsigned len, unsigned dir) -{ - static const struct { - void (*tu_fifo_get_info)(tu_fifo_t *f, tu_fifo_buffer_info_t *info); - void (*tu_fifo_advance)(tu_fifo_t *f, uint16_t n); - void (*pipe_read_write)(void *buf, volatile void *fifo, unsigned len); - } ops[] = { - /* OUT */ {tu_fifo_get_write_info,tu_fifo_advance_write_pointer,pipe_read_packet}, - /* IN */ {tu_fifo_get_read_info, tu_fifo_advance_read_pointer, pipe_write_packet}, - }; +// Write data sw fifo --> hw fifo +static void pipe_write_packet_ff(tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { + tu_fifo_buffer_info_t info; + tu_fifo_get_read_info(f, &info); + + uint16_t count = tu_min16(total_len, info.len_lin); + pipe_write_packet(info.ptr_lin, fifo, count); + + uint16_t rem = total_len - count; + if (rem) { + rem = tu_min16(rem, info.len_wrap); + pipe_write_packet(info.ptr_wrap, fifo, rem); + count += rem; + } + + tu_fifo_advance_read_pointer(f, count); +} +// Read data sw fifo <-- hw fifo +static void pipe_read_packet_ff(tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { tu_fifo_buffer_info_t info; - ops[dir].tu_fifo_get_info(f, &info); + tu_fifo_get_write_info(f, &info); - unsigned total_len = len; - len = TU_MIN(total_len, info.len_lin); - ops[dir].pipe_read_write(info.ptr_lin, fifo, len); + uint16_t count = tu_min16(total_len, info.len_lin); + pipe_read_packet(info.ptr_lin, fifo, count); - unsigned rem = total_len - len; + uint16_t rem = total_len - count; if (rem) { - len = TU_MIN(rem, info.len_wrap); - ops[dir].pipe_read_write(info.ptr_wrap, fifo, len); - rem -= len; + rem = tu_min16(rem, info.len_wrap); + pipe_read_packet(info.ptr_wrap, fifo, rem); + count += rem; } - ops[dir].tu_fifo_advance(f, total_len - rem); + + tu_fifo_advance_write_pointer(f, count); } +//--------------------------------------------------------------------+ +// Pipe Transfer +//--------------------------------------------------------------------+ + static bool pipe0_xfer_in(rusb2_reg_t* rusb) { pipe_state_t *pipe = &_dcd.pipe[0]; @@ -292,7 +311,7 @@ static bool pipe0_xfer_in(rusb2_reg_t* rusb) if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len, TUSB_DIR_IN); + pipe_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); } else { pipe_write_packet(buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; @@ -319,7 +338,7 @@ static bool pipe0_xfer_out(rusb2_reg_t* rusb) if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len, TUSB_DIR_OUT); + pipe_read_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); } else { pipe_read_packet(buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; @@ -357,7 +376,7 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len, TUSB_DIR_IN); + pipe_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); } else { pipe_write_packet(buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; @@ -391,7 +410,7 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) if (len) { if (pipe->ff) { - pipe_read_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len, TUSB_DIR_OUT); + pipe_read_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); } else { pipe_read_packet(buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; -- cgit v1.3.1 From e0f1ba8b0e9cf46fabcddc72a61d5515df424edf Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Jul 2023 16:07:11 +0700 Subject: fully work with multiple ports without CFG_TUSB_RHPORT0/1 --- hw/bsp/family_support.cmake | 4 +- hw/bsp/ra/boards/ra6m5_ek/board.cmake | 7 --- src/portable/renesas/rusb2/dcd_rusb2.c | 85 ++++++++++++++------------------- src/portable/renesas/rusb2/rusb2_type.h | 1 + 4 files changed, 39 insertions(+), 58 deletions(-) (limited to 'src') diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 5b97eb5e4..d8298c8ad 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -227,8 +227,8 @@ function(family_add_tinyusb TARGET OPT_MCU RTOS) if (DEFINED LOG) target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_DEBUG=${LOG}) - if (LOG STREQUAL "3") - # no inline for debug level 3 + if (LOG STREQUAL "4") + # no inline for debug level 4 target_compile_definitions(${TARGET}-tinyusb_config INTERFACE TU_ATTR_ALWAYS_INLINE=) endif () endif() diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index d934a0c0d..5a615f9b0 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -14,11 +14,4 @@ function(update_board TARGET) # port 0 is fullspeed, port 1 is highspeed BOARD_TUD_MAX_SPEED=$ ) - - if (PORT STREQUAL 1) - target_compile_definitions(${TARGET} PUBLIC - CFG_TUSB_RHPORT1_MODE=OPT_MODE_DEVICE|OPT_MODE_HIGH_SPEED - CFG_TUSB_RHPORT0_MODE=0 - ) - endif () endfunction() diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 464929224..3d3e52bfa 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -74,26 +74,6 @@ typedef struct TU_ATTR_PACKED _ccrx_evenaccess { uint16_t TRN; } reg_pipetre_t; -typedef union TU_ATTR_PACKED { - struct { - volatile uint8_t u8; - volatile uint8_t reserved8; - }; - volatile uint16_t u16; -} hw_fifo16_t; - -typedef union TU_ATTR_PACKED { - struct { - volatile uint8_t reserved8[3]; - volatile uint8_t u8; - }; - struct { - volatile uint16_t reserved16; - volatile uint16_t u16; - }; - volatile uint32_t u32; -} hw_fifo32_t; - typedef struct TU_ATTR_PACKED { void *buf; /* the start address of a transfer data buffer */ @@ -135,9 +115,11 @@ static dcd_data_t _dcd; //--------------------------------------------------------------------+ #ifdef RUSB2_SUPPORT_HIGHSPEED - #define is_highspeed_usbip(_p) (_p == 1) + #define is_highspeed_usbip(_p) (_p == 1) + #define is_highspeed_regbase(_reg) (_reg == RUSB2_REG(1)) #else - #define is_highspeed_usbip(_p) (false) + #define is_highspeed_usbip(_p) (false) + #define is_highspeed_regbase(_reg) (false) #endif static unsigned find_pipe(unsigned xfer) @@ -225,48 +207,57 @@ static inline void pipe_wait_for_ready(rusb2_reg_t * rusb, unsigned num) //--------------------------------------------------------------------+ // Write data buffer --> hw fifo -static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) +static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo, unsigned len) { -#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE) - volatile hw_fifo32_t *reg = (volatile hw_fifo32_t*) fifo; -#else - volatile hw_fifo16_t *reg = (volatile hw_fifo16_t*) fifo; -#endif + (void) rusb; + + volatile uint16_t *ff16; + volatile uint8_t *ff8; + + // Highspeed FIFO is 32-bit + if ( is_highspeed_regbase(rusb) ) { + ff16 = (volatile uint16_t*) ((uintptr_t) fifo+2); + ff8 = (volatile uint8_t *) ((uintptr_t) fifo+3); + }else { + ff16 = (volatile uint16_t*) fifo; + ff8 = ((volatile uint8_t*) fifo); + } uint8_t const* buf8 = (uint8_t const*) buf; while (len >= 2) { - reg->u16 = tu_unaligned_read16(buf8); + *ff16 = tu_unaligned_read16(buf8); buf8 += 2; len -= 2; } if (len > 0) { - reg->u8 = *buf8; + *ff8 = *buf8; ++buf8; } } // Read data buffer <-- hw fifo -static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) +static void pipe_read_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo, unsigned len) { + (void) rusb; uint8_t *p = (uint8_t*)buf; volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ while (len--) *p++ = *reg; } // Write data sw fifo --> hw fifo -static void pipe_write_packet_ff(tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { +static void pipe_write_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { tu_fifo_buffer_info_t info; tu_fifo_get_read_info(f, &info); uint16_t count = tu_min16(total_len, info.len_lin); - pipe_write_packet(info.ptr_lin, fifo, count); + pipe_write_packet(rusb, info.ptr_lin, fifo, count); uint16_t rem = total_len - count; if (rem) { rem = tu_min16(rem, info.len_wrap); - pipe_write_packet(info.ptr_wrap, fifo, rem); + pipe_write_packet(rusb, info.ptr_wrap, fifo, rem); count += rem; } @@ -274,17 +265,17 @@ static void pipe_write_packet_ff(tu_fifo_t *f, volatile void *fifo, uint16_t tot } // Read data sw fifo <-- hw fifo -static void pipe_read_packet_ff(tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { +static void pipe_read_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void *fifo, uint16_t total_len) { tu_fifo_buffer_info_t info; tu_fifo_get_write_info(f, &info); uint16_t count = tu_min16(total_len, info.len_lin); - pipe_read_packet(info.ptr_lin, fifo, count); + pipe_read_packet(rusb, info.ptr_lin, fifo, count); uint16_t rem = total_len - count; if (rem) { rem = tu_min16(rem, info.len_wrap); - pipe_read_packet(info.ptr_wrap, fifo, rem); + pipe_read_packet(rusb, info.ptr_wrap, fifo, rem); count += rem; } @@ -311,9 +302,9 @@ static bool pipe0_xfer_in(rusb2_reg_t* rusb) if (len) { if (pipe->ff) { - pipe_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); + pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); } else { - pipe_write_packet(buf, (volatile void*)&rusb->CFIFO, len); + pipe_write_packet(rusb, buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } } @@ -338,9 +329,9 @@ static bool pipe0_xfer_out(rusb2_reg_t* rusb) if (len) { if (pipe->ff) { - pipe_read_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); + pipe_read_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->CFIFO, len); } else { - pipe_read_packet(buf, (volatile void*)&rusb->CFIFO, len); + pipe_read_packet(rusb, buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } } @@ -376,9 +367,9 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) if (len) { if (pipe->ff) { - pipe_write_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); + pipe_write_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); } else { - pipe_write_packet(buf, (volatile void*)&rusb->D0FIFO, len); + pipe_write_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } } @@ -410,9 +401,9 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) if (len) { if (pipe->ff) { - pipe_read_packet_ff((tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); + pipe_read_packet_ff(rusb, (tu_fifo_t*)buf, (volatile void*)&rusb->D0FIFO, len); } else { - pipe_read_packet(buf, (volatile void*)&rusb->D0FIFO, len); + pipe_read_packet(rusb, buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } } @@ -733,10 +724,6 @@ void dcd_init(uint8_t rhport) // rusb2->BUSWAIT |= 0x0F00U; rusb->PHYSET_b.REPSEL = 1; - - rusb->CFIFOSEL_b.MBW = 1; - rusb->D0FIFOSEL_b.MBW = 1; - rusb->D1FIFOSEL_b.MBW = 1; } else #endif { diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index 7a5e37089..28cec9999 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -1670,6 +1670,7 @@ TU_ATTR_BIT_FIELD_ORDER_END #define RUSB2_FIFOSEL_BIGEND (1U << RUSB2_CFIFOSEL_BIGEND_Pos) /* FIFO Big Endian */ #define RUSB2_FIFOSEL_MBW_8BIT (0U << RUSB2_CFIFOSEL_MBW_Pos) /* 8-bit width */ #define RUSB2_FIFOSEL_MBW_16BIT (1U << RUSB2_CFIFOSEL_MBW_Pos) /* 16-bit width */ +#define RUSB2_FIFOSEL_MBW_32BIT (2U << RUSB2_CFIFOSEL_MBW_Pos) /* 32-bit width */ #define RUSB2_INTSTS0_CTSQ_CTRL_RDATA (1U << RUSB2_INTSTS0_CTSQ_Pos) -- cgit v1.3.1 From 88478a9d052edc364561da39382faef72f937ecb Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Jul 2023 16:24:22 +0700 Subject: add PORT selection for makefile --- hw/bsp/ra/boards/ra6m5_ek/board.mk | 3 +++ hw/bsp/ra/family.cmake | 2 +- hw/bsp/ra/family.mk | 12 ++++++++++++ src/portable/renesas/rusb2/dcd_rusb2.c | 4 ++++ 4 files changed, 20 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.mk b/hw/bsp/ra/boards/ra6m5_ek/board.mk index 567908b63..a5c933764 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.mk +++ b/hw/bsp/ra/boards/ra6m5_ek/board.mk @@ -4,4 +4,7 @@ MCU_VARIANT = ra6m5 # For flash-jlink target JLINK_DEVICE = R7FA6M5BH +# Port 1 is highspeed +PORT ?= 1 + flash: flash-jlink diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index eb2d4958f..f09e86a72 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -13,7 +13,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS RA CACHE INTERNAL "") +set(FAMILY_MCUS RAXXX CACHE INTERNAL "") #------------------------------------ # BOARD_TARGET diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index b6e1bb0ae..f5097460a 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -3,8 +3,12 @@ DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5 FSP_RA = hw/mcu/renesas/fsp/ra/fsp include $(TOP)/$(BOARD_PATH)/board.mk +# Default to port 0 fullspeed, board with port 1 highspeed should override this in board.mk +PORT ?= 0 + CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_RAXXX \ + -DBOARD_TUD_RHPORT=$(PORT) \ -Wno-error=undef \ -Wno-error=strict-prototypes \ -Wno-error=cast-align \ @@ -15,6 +19,14 @@ CFLAGS += \ -nostartfiles \ -ffreestanding +ifeq ($(PORT), 1) + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using PORT 1 HighSpeed") +else + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + $(info "Using PORT 0 FullSpeed") +endif + SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 3d3e52bfa..17d22f696 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -216,6 +216,7 @@ static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo // Highspeed FIFO is 32-bit if ( is_highspeed_regbase(rusb) ) { + // TODO 32-bit access for better performance ff16 = (volatile uint16_t*) ((uintptr_t) fifo+2); ff8 = (volatile uint8_t *) ((uintptr_t) fifo+3); }else { @@ -241,6 +242,9 @@ static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo static void pipe_read_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo, unsigned len) { (void) rusb; + + // TODO 16/32-bit access for better performance + uint8_t *p = (uint8_t*)buf; volatile uint8_t *reg = (volatile uint8_t*)fifo; /* byte access is always at base register address */ while (len--) *p++ = *reg; -- cgit v1.3.1 From 0f53e746ffa21b6186809b2b896ddc74d38e9058 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 7 Jul 2023 18:41:16 +0700 Subject: move check highspeed to rusb_ra --- src/portable/renesas/rusb2/dcd_rusb2.c | 31 +++++-------------------------- src/portable/renesas/rusb2/rusb2_ra.h | 15 +++++++++++---- src/portable/renesas/rusb2/rusb2_rx.h | 9 +++++++++ src/portable/renesas/rusb2/rusb2_type.h | 14 ++++++++++++++ 4 files changed, 39 insertions(+), 30 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 17d22f696..358e5644b 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -61,19 +61,6 @@ TU_ATTR_PACKED_BEGIN TU_ATTR_BIT_FIELD_ORDER_BEGIN -typedef struct TU_ATTR_PACKED _ccrx_evenaccess { - union { - struct { - uint16_t : 8; - uint16_t TRCLR: 1; - uint16_t TRENB: 1; - uint16_t : 0; - }; - uint16_t TRE; - }; - uint16_t TRN; -} reg_pipetre_t; - typedef struct TU_ATTR_PACKED { void *buf; /* the start address of a transfer data buffer */ @@ -114,14 +101,6 @@ static dcd_data_t _dcd; // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -#ifdef RUSB2_SUPPORT_HIGHSPEED - #define is_highspeed_usbip(_p) (_p == 1) - #define is_highspeed_regbase(_reg) (_reg == RUSB2_REG(1)) -#else - #define is_highspeed_usbip(_p) (false) - #define is_highspeed_regbase(_reg) (false) -#endif - static unsigned find_pipe(unsigned xfer) { switch (xfer) { @@ -215,7 +194,7 @@ static void pipe_write_packet(rusb2_reg_t * rusb, void *buf, volatile void *fifo volatile uint8_t *ff8; // Highspeed FIFO is 32-bit - if ( is_highspeed_regbase(rusb) ) { + if ( rusb2_is_highspeed_reg(rusb) ) { // TODO 32-bit access for better performance ff16 = (volatile uint16_t*) ((uintptr_t) fifo+2); ff8 = (volatile uint8_t *) ((uintptr_t) fifo+3); @@ -706,7 +685,7 @@ void dcd_init(uint8_t rhport) rusb2_module_start(rhport, true); #ifdef RUSB2_SUPPORT_HIGHSPEED - if ( is_highspeed_usbip(rhport) ) { + if ( rusb2_is_highspeed_rhport(rhport) ) { rusb->SYSCFG_b.HSE = 1; // leave CLKSEL as default (0x11) 24Mhz @@ -787,7 +766,7 @@ void dcd_connect(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - if ( is_highspeed_usbip(rhport)) { + if ( rusb2_is_highspeed_rhport(rhport)) { rusb->SYSCFG_b.CNEN = 1; } rusb->SYSCFG_b.DPRPU = 1; @@ -824,7 +803,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) if (xfer == TUSB_XFER_ISOCHRONOUS) { // Fullspeed ISO is limit to 256 bytes - if ( !is_highspeed_usbip(rhport) && mps > 256) { + if ( !rusb2_is_highspeed_rhport(rhport) && mps > 256) { return false; } } @@ -838,7 +817,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) /* setup pipe */ dcd_int_disable(rhport); - if ( is_highspeed_usbip(rhport) ) { + if ( rusb2_is_highspeed_rhport(rhport) ) { // FIXME shouldn't be after pipe selection and config, also the BUFNMB should be changed // depending on the allocation scheme rusb->PIPEBUF = 0x7C08; diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index e04a99685..28b690512 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -47,15 +47,15 @@ extern "C" { #pragma GCC diagnostic pop #endif -//--------------------------------------------------------------------+ -// -//--------------------------------------------------------------------+ - // IAR does not have __builtin_ctz #if defined(__ICCARM__) #define __builtin_ctz(x) __iar_builtin_CLZ(__iar_builtin_RBIT(x)) #endif +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + typedef struct { uint32_t reg_base; int32_t irqnum; @@ -78,6 +78,13 @@ static rusb2_controller_t rusb2_controller[] = { #define RUSB2_REG(_p) ((rusb2_reg_t*) rusb2_controller[_p].reg_base) +#define rusb2_is_highspeed_rhport(_p) (_p == 1) +#define rusb2_is_highspeed_reg(_reg) (_reg == RUSB2_REG(1)) + +//--------------------------------------------------------------------+ +// RUSB2 API +//--------------------------------------------------------------------+ + TU_ATTR_ALWAYS_INLINE static inline void rusb2_module_start(uint8_t rhport, bool start) { uint32_t const mask = 1U << (11+rhport); if (start) { diff --git a/src/portable/renesas/rusb2/rusb2_rx.h b/src/portable/renesas/rusb2/rusb2_rx.h index 17b9a918c..7bf4be47e 100644 --- a/src/portable/renesas/rusb2/rusb2_rx.h +++ b/src/portable/renesas/rusb2/rusb2_rx.h @@ -42,6 +42,15 @@ TU_ATTR_ALWAYS_INLINE static inline rusb2_reg_t* RUSB2_REG(uint8_t rhport) { return (rusb2_reg_t *) RUSB2_REG_BASE; } + +#define rusb2_is_highspeed_rhport(_p) (false) +#define rusb2_is_highspeed_reg(_reg) (false) + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + + // Start/Stop MSTP TODO implement later TU_ATTR_ALWAYS_INLINE static inline void rusb2_module_start(uint8_t rhport, bool start) { (void) rhport; diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index 28cec9999..aceeb3c3e 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -48,6 +48,20 @@ extern "C" { TU_ATTR_PACKED_BEGIN TU_ATTR_BIT_FIELD_ORDER_BEGIN +// TODO same as RUSB2_PIPE_TR_t +typedef struct TU_ATTR_PACKED _ccrx_evenaccess { + union { + struct { + uint16_t : 8; + uint16_t TRCLR: 1; + uint16_t TRENB: 1; + uint16_t : 0; + }; + uint16_t TRE; + }; + uint16_t TRN; +} reg_pipetre_t; + typedef struct { union { volatile uint16_t E; /* (@ 0x00000000) Pipe Transaction Counter Enable Register */ -- cgit v1.3.1 From 3fdd2a40b2103089e47609a05577fc84b786ec4f Mon Sep 17 00:00:00 2001 From: Aladdin Bakosh Date: Fri, 2 Jun 2023 15:04:53 +0200 Subject: osal_none: make it possible to override the task delay function --- src/host/usbh.c | 2 +- src/osal/osal_none.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'src') diff --git a/src/host/usbh.c b/src/host/usbh.c index 184bda23b..1418cfb79 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -256,7 +256,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t #if CFG_TUSB_OS == OPT_OS_NONE // TODO rework time-related function later -void osal_task_delay(uint32_t msec) +TU_ATTR_WEAK void osal_task_delay(uint32_t msec) { const uint32_t start = hcd_frame_number(_usbh_controller); while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {} diff --git a/src/osal/osal_none.h b/src/osal/osal_none.h index 5f407378e..76e77c25d 100644 --- a/src/osal/osal_none.h +++ b/src/osal/osal_none.h @@ -37,7 +37,7 @@ #if CFG_TUH_ENABLED // currently only needed/available in host mode -void osal_task_delay(uint32_t msec); +TU_ATTR_WEAK void osal_task_delay(uint32_t msec); #endif //--------------------------------------------------------------------+ -- cgit v1.3.1 From 1cc7c5d0309bcc7c6930fba78bc461e5822e8024 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 20 Jul 2023 11:20:12 +0700 Subject: add hcd_edpt_abort_xfer() API --- examples/dual/host_hid_to_device_cdc/only.txt | 1 + src/host/hcd.h | 3 +++ src/host/usbh.c | 28 +++++++++++++++++++-------- src/host/usbh.h | 7 +++++-- src/portable/ehci/ehci.c | 18 +++++++++++++++++ 5 files changed, 47 insertions(+), 10 deletions(-) (limited to 'src') diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index 6ee8e3fde..de5d8bed9 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -1,3 +1,4 @@ board:mimxrt1060_evk board:mimxrt1064_evk +board:mcb1800 mcu:RP2040 diff --git a/src/host/hcd.h b/src/host/hcd.h index 3355c18b2..cbfffb349 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -171,6 +171,9 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); +// Abort a queued transfer. Note: it can only abort transfer that has not been started +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); + // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); diff --git a/src/host/usbh.c b/src/host/usbh.c index ecc672198..bbf333d5f 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -710,6 +710,19 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer) return true; } +bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { + usbh_device_t* dev = get_device(daddr); + TU_VERIFY(dev); + + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + + // skip if not busy + if (!dev->ep_status[epnum][dir].busy) return true; + + return hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); +} + //--------------------------------------------------------------------+ // USBH API For Class Driver //--------------------------------------------------------------------+ @@ -741,7 +754,7 @@ void usbh_int_set(bool enabled) // Endpoint API //--------------------------------------------------------------------+ -// TODO has some duplication code with device, refactor later +// Claim an endpoint for transfer bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer @@ -757,7 +770,7 @@ bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) return true; } -// TODO has some duplication code with device, refactor later +// Release an claimed endpoint due to failed transfer attempt bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer @@ -773,7 +786,7 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) return true; } -// TODO has some duplication code with device, refactor later +// Submit an transfer bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { @@ -840,14 +853,13 @@ bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep) return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } -bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) -{ - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); - +bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); + return dev->ep_status[epnum][dir].busy; } diff --git a/src/host/usbh.h b/src/host/usbh.h index 0f969a46a..d765f6744 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -172,8 +172,11 @@ bool tuh_control_xfer(tuh_xfer_t* xfer); // - sync : blocking if complete callback is NULL. bool tuh_edpt_xfer(tuh_xfer_t* xfer); -// Open an non-control endpoint -bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep); +// Open a non-control endpoint +bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); // Set Configuration (control transfer) // config_num = 0 will un-configure device. Note: config_num = config_descriptor_index + 1 diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 38711e382..fd33d6cfc 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -510,6 +510,24 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; + +// uint8_t const epnum = tu_edpt_number(ep_addr); +// ehci_qhd_t* qhd; +// +// // TODO ISO not supported +// if (epnum == 0) { +// qhd = qhd_control(dev_addr); +// }else { +// qhd = qhd_get_from_addr(dev_addr, ep_addr); +// } +} + bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) { ehci_qhd_t *qhd = qhd_get_from_addr(daddr, ep_addr); -- cgit v1.3.1 From 0da273ea79d7a1c08e3b58301a0b7d3a49c60d13 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 21 Jul 2023 12:52:26 +0700 Subject: add stub hcd_edpt_abort_xfer() for all ports --- src/portable/mentor/musb/hcd_musb.c | 8 ++++++++ src/portable/nxp/khci/hcd_khci.c | 8 ++++++++ src/portable/ohci/ohci.c | 8 ++++++++ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 8 ++++++++ src/portable/raspberrypi/rp2040/hcd_rp2040.c | 8 ++++++++ src/portable/renesas/rusb2/hcd_rusb2.c | 8 ++++++++ 6 files changed, 48 insertions(+) (limited to 'src') diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 9eb2e005e..5be67a186 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -822,6 +822,14 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b return ret; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + // clear stall, data toggle is also reset to DATA0 bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) { diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index f6029ee0d..6784049c5 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -562,6 +562,14 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) { if (!tu_edpt_number(ep_addr)) return true; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 3f702d22c..228c43df6 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -543,6 +543,14 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) { ohci_ed_t * const p_ed = ed_from_addr(dev_addr, ep_addr); diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index 264af2e7a..fa285327c 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -138,6 +138,14 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen); } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { uint8_t const pio_rhport = RHPORT_PIO(rhport); diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 02f9968a7..5091fa907 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -576,6 +576,14 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * return true; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { (void) rhport; diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 65bbc656b..0a75d0b47 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -710,6 +710,14 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b return r; } +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + // TODO not implemented yet + return false; +} + bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) { uint16_t volatile *ctr = addr_to_pipectr(dev_addr, ep_addr); -- cgit v1.3.1 From 14c98dd863a9cab55fc2981fb826f63eceed4b2d Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 21 Jul 2023 16:39:30 +0700 Subject: minor ehci rename, move code around --- src/portable/ehci/ehci.c | 181 ++++++++++++++++++++++++----------------------- 1 file changed, 91 insertions(+), 90 deletions(-) (limited to 'src') diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index fd33d6cfc..0a26986d5 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -126,53 +126,29 @@ static inline void print_intr(uint32_t intr) { //--------------------------------------------------------------------+ // PROTOTYPE //--------------------------------------------------------------------+ -static inline ehci_link_t* get_period_head(uint8_t rhport, uint32_t interval_ms) -{ - (void) rhport; - return (ehci_link_t*) &ehci_data.period_head_arr[ tu_log2( tu_min32(FRAMELIST_SIZE, interval_ms) ) ]; -} - -static inline ehci_qhd_t* qhd_control(uint8_t dev_addr) -{ - return &ehci_data.control[dev_addr].qhd; -} - -static inline ehci_qhd_t* qhd_async_head(uint8_t rhport) -{ - (void) rhport; - // control qhd of dev0 is used as async head - return qhd_control(0); -} -static inline ehci_qtd_t* qtd_control(uint8_t dev_addr) -{ - return &ehci_data.control[dev_addr].qtd; -} +// weak dcache for non-cacheable MCU +TU_ATTR_WEAK void hcd_dcache_clean(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; } +TU_ATTR_WEAK void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; } +TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; } +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); -static inline ehci_qhd_t* qhd_next (ehci_qhd_t const * p_qhd); -static inline ehci_qhd_t* qhd_find_free (void); -static inline ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_next (ehci_qhd_t const * p_qhd); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_find_free (void); +static ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd); -static inline ehci_qtd_t* qtd_find_free (void); +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr); +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_find_free (void); static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes); static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); static inline ehci_link_t* list_next (ehci_link_t const *p_link); - -TU_ATTR_WEAK void hcd_dcache_clean(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; -} - -TU_ATTR_WEAK void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; -} - -TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - (void) addr; (void) data_size; -} +static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr); //--------------------------------------------------------------------+ // HCD API @@ -274,7 +250,7 @@ void hcd_device_close(uint8_t rhport, uint8_t daddr) } // Remove from async list - list_remove_qhd_by_daddr((ehci_link_t *) qhd_async_head(rhport), daddr); + list_remove_qhd_by_daddr((ehci_link_t *) list_get_async_head(rhport), daddr); // Remove from all interval period list for(uint8_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++) { @@ -286,37 +262,42 @@ void hcd_device_close(uint8_t rhport, uint8_t daddr) } static void init_periodic_list(uint8_t rhport) { + (void) rhport; + // Build the polling interval tree with 1 ms, 2 ms, 4 ms and 8 ms (framesize) only for ( uint32_t i = 0; i < TU_ARRAY_SIZE(ehci_data.period_head_arr); i++ ) { ehci_data.period_head_arr[i].int_smask = 1; // queue head in period list must have smask non-zero ehci_data.period_head_arr[i].qtd_overlay.halted = 1; // dummy node, always inactive } - ehci_link_t * const framelist = ehci_data.period_framelist; - ehci_link_t * const period_1ms = get_period_head(rhport, 1u); - + // TODO EHCI_FRAMELIST_SIZE with other size than 8 // all links --> period_head_arr[0] (1ms) // 0, 2, 4, 6 etc --> period_head_arr[1] (2ms) // 1, 5 --> period_head_arr[2] (4ms) // 3 --> period_head_arr[3] (8ms) - // TODO EHCI_FRAMELIST_SIZE with other size than 8 + ehci_link_t * const framelist = ehci_data.period_framelist; + ehci_link_t * const head_1ms = (ehci_link_t *) &ehci_data.period_head_arr[0]; + ehci_link_t * const head_2ms = (ehci_link_t *) &ehci_data.period_head_arr[1]; + ehci_link_t * const head_4ms = (ehci_link_t *) &ehci_data.period_head_arr[2]; + ehci_link_t * const head_8ms = (ehci_link_t *) &ehci_data.period_head_arr[3]; + for (uint32_t i = 0; i < FRAMELIST_SIZE; i++) { - framelist[i].address = (uint32_t) period_1ms; + framelist[i].address = (uint32_t) head_1ms; framelist[i].type = EHCI_QTYPE_QHD; } for (uint32_t i = 0; i < FRAMELIST_SIZE; i += 2) { - list_insert(framelist + i, get_period_head(rhport, 2u), EHCI_QTYPE_QHD); + list_insert(framelist + i, head_2ms, EHCI_QTYPE_QHD); } for (uint32_t i = 1; i < FRAMELIST_SIZE; i += 4) { - list_insert(framelist + i, get_period_head(rhport, 4u), EHCI_QTYPE_QHD); + list_insert(framelist + i, head_4ms, EHCI_QTYPE_QHD); } - list_insert(framelist + 3, get_period_head(rhport, 8u), EHCI_QTYPE_QHD); + list_insert(framelist + 3, head_8ms, EHCI_QTYPE_QHD); - period_1ms->terminate = 1; + head_1ms->terminate = 1; } bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) @@ -345,7 +326,7 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) EHCI_INT_MASK_NXP_PERIODIC | EHCI_INT_MASK_NXP_ASYNC | EHCI_INT_MASK_FRAMELIST_ROLLOVER; //------------- Asynchronous List -------------// - ehci_qhd_t * const async_head = qhd_async_head(rhport); + ehci_qhd_t * const async_head = list_get_async_head(rhport); tu_memclr(async_head, sizeof(ehci_qhd_t)); async_head->next.address = (uint32_t) async_head; // circular list, next is itself @@ -426,11 +407,11 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const { case TUSB_XFER_CONTROL: case TUSB_XFER_BULK: - list_head = (ehci_link_t*) qhd_async_head(rhport); + list_head = (ehci_link_t*) list_get_async_head(rhport); break; case TUSB_XFER_INTERRUPT: - list_head = get_period_head(rhport, p_qhd->interval_ms); + list_head = list_get_period_head(rhport, p_qhd->interval_ms); break; case TUSB_XFER_ISOCHRONOUS: @@ -439,10 +420,8 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const default: break; } - TU_ASSERT(list_head); - // TODO might need to disable async/period list list_insert(list_head, (ehci_link_t*) p_qhd, EHCI_QTYPE_QHD); hcd_dcache_clean(p_qhd, sizeof(ehci_qhd_t)); @@ -622,8 +601,8 @@ void async_list_xfer_complete_isr(ehci_qhd_t * const async_head) TU_ATTR_ALWAYS_INLINE static inline void period_list_xfer_complete_isr(uint8_t rhport, uint32_t interval_ms) { - uint32_t const period_1ms_addr = (uint32_t) get_period_head(rhport, 1u); - ehci_link_t next_link = * get_period_head(rhport, interval_ms); + uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u); + ehci_link_t next_link = *list_get_period_head(rhport, interval_ms); while (!next_link.terminate) { if (interval_ms > 1 && period_1ms_addr == tu_align32(next_link.address)) { @@ -721,7 +700,7 @@ TU_ATTR_ALWAYS_INLINE static inline void xfer_error_isr(uint8_t rhport) { //------------- async list -------------// - ehci_qhd_t * const async_head = qhd_async_head(rhport); + ehci_qhd_t * const async_head = list_get_async_head(rhport); ehci_qhd_t *p_qhd = async_head; do { @@ -731,10 +710,10 @@ void xfer_error_isr(uint8_t rhport) }while(p_qhd != async_head); // async list traversal, stop if loop around //------------- TODO refractor period list -------------// - uint32_t const period_1ms_addr = (uint32_t) get_period_head(rhport, 1u); + uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u); for (uint32_t interval_ms=1; interval_ms <= FRAMELIST_SIZE; interval_ms *= 2) { - ehci_link_t next_item = * get_period_head(rhport, interval_ms); + ehci_link_t next_item = *list_get_period_head(rhport, interval_ms); // TODO abstract max loop guard for period while( !next_item.terminate && @@ -801,7 +780,7 @@ void hcd_int_handler(uint8_t rhport) //------------- some QTD/SITD/ITD with IOC set is completed -------------// if (int_status & EHCI_INT_MASK_NXP_ASYNC) { - async_list_xfer_complete_isr(qhd_async_head(rhport)); + async_list_xfer_complete_isr(list_get_async_head(rhport)); regs->status = EHCI_INT_MASK_NXP_ASYNC; // Acknowledge } @@ -828,35 +807,62 @@ void hcd_int_handler(uint8_t rhport) } //--------------------------------------------------------------------+ -// HELPER +// List Managing Helper //--------------------------------------------------------------------+ +// Get head of periodic list +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms) { + (void) rhport; + return (ehci_link_t*) &ehci_data.period_head_arr[ tu_log2( tu_min32(FRAMELIST_SIZE, interval_ms) ) ]; +} -//------------- queue head helper -------------// -static inline ehci_qhd_t* qhd_find_free (void) +// Get head of async list +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport) { + (void) rhport; + return qhd_control(0); // control qhd of dev0 is used as async head +} + +// insert at head +static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) { - for (uint32_t i=0; iaddress = current->address; + current->address = ((uint32_t) new) | (new_type << 1); +} + +static inline ehci_link_t* list_next(ehci_link_t const *p_link) +{ + return (ehci_link_t*) tu_align32(p_link->address); +} + +//--------------------------------------------------------------------+ +// Queue Header helper +//--------------------------------------------------------------------+ + +// Get queue head for control transfer (always available) +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr) { + return &ehci_data.control[dev_addr].qhd; +} + +// Find a free queue head +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_find_free(void) { + for ( uint32_t i = 0; i < QHD_MAX; i++ ) { if ( !ehci_data.qhd_pool[i].used ) return &ehci_data.qhd_pool[i]; } - return NULL; } -static inline ehci_qhd_t* qhd_next(ehci_qhd_t const * p_qhd) -{ - return (ehci_qhd_t*) tu_align32(p_qhd->next.address); +// Next queue head link +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_next(ehci_qhd_t const *p_qhd) { + return (ehci_qhd_t *) tu_align32(p_qhd->next.address); } -static inline ehci_qhd_t* qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) -{ - ehci_qhd_t* qhd_pool = ehci_data.qhd_pool; +// Get queue head from address +static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { + ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; - for(uint32_t i=0; i cannot be cleared (ehci halted otherwise) @@ -938,6 +945,7 @@ static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t c } } +// Attach a TD to queue head static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd) { qhd->attached_qtd = qtd; qhd->attached_buffer = qtd->buffer[0]; @@ -949,9 +957,16 @@ static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd) { hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); } +//--------------------------------------------------------------------+ +// Queue TD helper +//--------------------------------------------------------------------+ + +// Get TD for control transfer (always available) +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr) { + return &ehci_data.control[dev_addr].qtd; +} -//------------- TD helper -------------// -static inline ehci_qtd_t *qtd_find_free(void) { +TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t *qtd_find_free(void) { for (uint32_t i = 0; i < QTD_MAX; i++) { if (!ehci_data.qtd_pool[i].used) return &ehci_data.qtd_pool[i]; } @@ -979,18 +994,4 @@ static void qtd_init(ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) } } -//------------- List Managing Helper -------------// - -// insert at head -static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) -{ - new->address = current->address; - current->address = ((uint32_t) new) | (new_type << 1); -} - -static inline ehci_link_t* list_next(ehci_link_t const *p_link) -{ - return (ehci_link_t*) tu_align32(p_link->address); -} - #endif -- cgit v1.3.1 From c122e9df73331fa60d1713c7cc4cf46251b0cd76 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 21 Jul 2023 19:06:36 +0700 Subject: implement hcd_edpt_abort_xfer() for EHCI, also move thing around a bit --- src/common/tusb_common.h | 2 + src/host/hcd.h | 1 + src/host/usbh.c | 10 ++- src/host/usbh.h | 1 + src/portable/ehci/ehci.c | 200 +++++++++++++++++++++++++++++------------------ src/portable/ehci/ehci.h | 19 +++-- 6 files changed, 147 insertions(+), 86 deletions(-) (limited to 'src') diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 957491aa9..b3d9fc7cd 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -53,6 +53,8 @@ #define U32_TO_U8S_LE(_u32) TU_U32_BYTE0(_u32), TU_U32_BYTE1(_u32), TU_U32_BYTE2(_u32), TU_U32_BYTE3(_u32) #define TU_BIT(n) (1UL << (n)) + +// Generate a mask with bit from high (31) to low (0) set, e.g TU_GENMASK(3, 0) = 0b1111 #define TU_GENMASK(h, l) ( (UINT32_MAX << (l)) & (UINT32_MAX >> (31 - (h))) ) //--------------------------------------------------------------------+ diff --git a/src/host/hcd.h b/src/host/hcd.h index cbfffb349..90bfd79db 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -172,6 +172,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); // Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked diff --git a/src/host/usbh.c b/src/host/usbh.c index bbf333d5f..15c48be47 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -718,9 +718,15 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { uint8_t const dir = tu_edpt_dir(ep_addr); // skip if not busy - if (!dev->ep_status[epnum][dir].busy) return true; + TU_VERIFY(dev->ep_status[epnum][dir].busy); - return hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); + bool const ret = hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); + if (ret) { + // mark as ready if transfer is aborted + dev->ep_status[epnum][dir].busy = false; + } + + return ret; } //--------------------------------------------------------------------+ diff --git a/src/host/usbh.h b/src/host/usbh.h index d765f6744..0d56f40c9 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -176,6 +176,7 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer); bool tuh_edpt_open(uint8_t daddr, tusb_desc_endpoint_t const * desc_ep); // Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr); // Set Configuration (control transfer) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 0a26986d5..6388add08 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -48,8 +48,8 @@ #ifdef TUP_USBIP_CHIPIDEA_HS // NXP Transdimension: 8 elements #define FRAMELIST_SIZE_BIT_VALUE 7u - #define FRAMELIST_SIZE_USBCMD_VALUE (((FRAMELIST_SIZE_BIT_VALUE & 3) << EHCI_USBCMD_POS_FRAMELIST_SIZE) | \ - ((FRAMELIST_SIZE_BIT_VALUE >> 2) << EHCI_USBCMD_POS_NXP_FRAMELIST_SIZE_MSB)) + #define FRAMELIST_SIZE_USBCMD_VALUE (((FRAMELIST_SIZE_BIT_VALUE & 3) << EHCI_USBCMD_FRAMELIST_SIZE_SHIFT) | \ + ((FRAMELIST_SIZE_BIT_VALUE >> 2) << EHCI_USBCMD_CHIPIDEA_FRAMELIST_SIZE_MSB_SHIFT)) #else // STD EHCI: 256 elements #define FRAMELIST_SIZE_BIT_VALUE 2u @@ -132,24 +132,46 @@ TU_ATTR_WEAK void hcd_dcache_clean(void const* addr, uint32_t data_size) { (void TU_ATTR_WEAK void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; } TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; } -TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); -TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); - TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_control(uint8_t dev_addr); TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_next (ehci_qhd_t const * p_qhd); TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* qhd_find_free (void); static ehci_qhd_t* qhd_get_from_addr (uint8_t dev_addr, uint8_t ep_addr); static void qhd_init(ehci_qhd_t *p_qhd, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd); +static void qhd_remove_qtd(ehci_qhd_t *qhd); TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_control(uint8_t dev_addr); TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t* qtd_find_free (void); static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes); -static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); -static inline ehci_link_t* list_next (ehci_link_t const *p_link); +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_get_period_head(uint8_t rhport, uint32_t interval_ms); +TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhport); +TU_ATTR_ALWAYS_INLINE static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next (ehci_link_t const *p_link); static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr); +static void ehci_disable_schedule(ehci_registers_t* regs, bool is_period) { + // maybe have a timeout for status + if (is_period) { + regs->command_bm.periodic_enable = 0; + while(regs->status_bm.periodic_status) {} + } else { + regs->command_bm.async_enable = 0; + while(regs->status_bm.async_status) {} // should have a timeout + } +} + +static void ehci_enable_schedule(ehci_registers_t* regs, bool is_period) { + // maybe have a timeout for status + if (is_period) { + regs->command_bm.periodic_enable = 1; + while ( 0 == regs->status_bm.periodic_status ) {} + } else { + regs->command_bm.async_enable = 1; + while( 0 == regs->status_bm.async_status ) {} + } +} + //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ @@ -204,43 +226,6 @@ tusb_speed_t hcd_port_speed_get(uint8_t rhport) return (tusb_speed_t) ehci_data.regs->portsc_bm.nxp_port_speed; // NXP specific port speed } -static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { - ehci_link_t* prev = list_head; - - while (prev && !prev->terminate) { - ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); - - // done if loop back to head - if ( (uintptr_t) qhd == (uintptr_t) list_head) { - break; - } - - if ( qhd->dev_addr == dev_addr ) { - // TODO deactivate all TD, wait for QHD to inactive before removal - prev->address = qhd->next.address; - - // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) - qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); - - if ( qhd->int_smask ) - { - // period list queue element is guarantee to be free in the next frame (1 ms) - qhd->used = 0; - }else - { - // async list use async advance handshake - // mark as removing, will completely re-usable when async advance isr occurs - qhd->removing = 1; - } - - hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); - hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); - }else { - prev = list_next(prev); - } - } -} - // Close all opened endpoint belong to this device void hcd_device_close(uint8_t rhport, uint8_t daddr) { @@ -347,8 +332,7 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) regs->nxp_tt_control = 0; //------------- USB CMD Register -------------// - regs->command |= TU_BIT(EHCI_USBCMD_POS_RUN_STOP) | TU_BIT(EHCI_USBCMD_POS_ASYNC_ENABLE) | - TU_BIT(EHCI_USBCMD_POS_PERIOD_ENABLE) | // TODO enable period list only there is int/iso endpoint + regs->command |= EHCI_USBCMD_RUN_STOP | EHCI_USBCMD_PERIOD_SCHEDULE_ENABLE | EHCI_USBCMD_ASYNC_SCHEDULE_ENABLE | FRAMELIST_SIZE_USBCMD_VALUE; //------------- ConfigFlag Register (skip) -------------// @@ -358,7 +342,7 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) if (ehci_data.cap_regs->hcsparams_bm.port_power_control) { // mask out all change bits since they are Write 1 to clear uint32_t portsc = (regs->portsc & ~EHCI_PORTSC_MASK_W1C); - portsc |= ECHI_PORTSC_MASK_PORT_POWER; + portsc |= EHCI_PORTSC_MASK_PORT_POWER; regs->portsc = portsc; } @@ -455,20 +439,17 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - ehci_qhd_t* qhd; + ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); ehci_qtd_t* qtd; if (epnum == 0) { - qhd = qhd_control(dev_addr); qtd = qtd_control(dev_addr); - qtd_init(qtd, buffer, buflen); // first data toggle is always 1 (data & setup stage) qtd->data_toggle = 1; qtd->pid = dir ? EHCI_PID_IN : EHCI_PID_OUT; } else { - qhd = qhd_get_from_addr(dev_addr, ep_addr); qtd = qtd_find_free(); TU_ASSERT(qtd); @@ -491,20 +472,34 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { (void) rhport; - (void) dev_addr; - (void) ep_addr; - return false; + // TODO ISO not supported yet + ehci_qhd_t* qhd = qhd_get_from_addr(dev_addr, ep_addr); + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + TU_VERIFY(qtd != NULL); // no queued transfer + + hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); + TU_VERIFY(qtd->active); // transfer is already complete + + // HC is still processing, disable HC list schedule before making changes + bool const is_period = (qhd->interval_ms > 0); + + ehci_disable_schedule(ehci_data.regs, is_period); + + // check active bit again just in case HC has just processed the TD + bool const still_active = qtd->active; + if (still_active) { + // remove TD from QH overlay + qhd->qtd_overlay.next.terminate = 1; + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + + // remove TD from QH software list + qhd_remove_qtd(qhd); + } -// uint8_t const epnum = tu_edpt_number(ep_addr); -// ehci_qhd_t* qhd; -// -// // TODO ISO not supported -// if (epnum == 0) { -// qhd = qhd_control(dev_addr); -// }else { -// qhd = qhd_get_from_addr(dev_addr, ep_addr); -// } + ehci_enable_schedule(ehci_data.regs, is_period); + + return still_active; // true if removed an active transfer } bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) @@ -554,8 +549,12 @@ void port_connect_status_change_isr(uint8_t rhport) TU_ATTR_ALWAYS_INLINE static inline void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { // examine TD attached to queue head - ehci_qtd_t * volatile qtd = (ehci_qtd_t * volatile) qhd->attached_qtd; - if (qtd == NULL) return; // no TD attached + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + + if (qtd == NULL) { + return; // no TD attached + } + hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); // TD is still active, no need to process @@ -572,9 +571,7 @@ void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { } // remove and free TD before invoking callback - qhd->attached_qtd = NULL; - qhd->attached_buffer = 0; - qtd->used = 0; // free QTD + qhd_remove_qtd(qhd); // notify usbh uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); @@ -677,9 +674,7 @@ void qhd_xfer_error_isr(ehci_qhd_t * qhd) } // remove and free TD before invoking callback - qhd->attached_qtd = NULL; - qhd->attached_buffer = 0; - qtd->used = 0; // free QTD + qhd_remove_qtd(qhd); if (0 == qhd->ep_number ) { // control cannot be halted @@ -822,18 +817,55 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t* list_get_async_head(uint8_t rhpo return qhd_control(0); // control qhd of dev0 is used as async head } -// insert at head -static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) +TU_ATTR_ALWAYS_INLINE static inline ehci_link_t* list_next(ehci_link_t const *p_link) { + return (ehci_link_t*) tu_align32(p_link->address); +} + +TU_ATTR_ALWAYS_INLINE static inline void list_insert(ehci_link_t *current, ehci_link_t *new, uint8_t new_type) { new->address = current->address; current->address = ((uint32_t) new) | (new_type << 1); } -static inline ehci_link_t* list_next(ehci_link_t const *p_link) -{ - return (ehci_link_t*) tu_align32(p_link->address); +// Remove all queue head belong to this device address +static void list_remove_qhd_by_daddr(ehci_link_t* list_head, uint8_t dev_addr) { + ehci_link_t* prev = list_head; + + while (prev && !prev->terminate) { + ehci_qhd_t* qhd = (ehci_qhd_t*) (uintptr_t) list_next(prev); + + // done if loop back to head + if ( (uintptr_t) qhd == (uintptr_t) list_head) { + break; + } + + if ( qhd->dev_addr == dev_addr ) { + // TODO deactivate all TD, wait for QHD to inactive before removal + prev->address = qhd->next.address; + + // EHCI 4.8.2 link the removed qhd's next to async head (which always reachable by Host Controller) + qhd->next.address = ((uint32_t) list_head) | (EHCI_QTYPE_QHD << 1); + + if ( qhd->int_smask ) + { + // period list queue element is guarantee to be free in the next frame (1 ms) + qhd->used = 0; + }else + { + // async list use async advance handshake + // mark as removing, will completely re-usable when async advance isr occurs + qhd->removing = 1; + } + + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); + hcd_dcache_clean(prev, sizeof(ehci_qhd_t)); + }else { + prev = list_next(prev); + } + } } + //--------------------------------------------------------------------+ // Queue Header helper //--------------------------------------------------------------------+ @@ -856,8 +888,12 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qhd_t *qhd_next(ehci_qhd_t const *p_qhd return (ehci_qhd_t *) tu_align32(p_qhd->next.address); } -// Get queue head from address +// Get queue head from device + endpoint address static ehci_qhd_t *qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr) { + if ( 0 == tu_edpt_number(ep_addr) ) { + return qhd_control(dev_addr); + } + ehci_qhd_t *qhd_pool = ehci_data.qhd_pool; for ( uint32_t i = 0; i < QHD_MAX; i++ ) { @@ -957,6 +993,16 @@ static void qhd_attach_qtd(ehci_qhd_t *qhd, ehci_qtd_t *qtd) { hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); } +// Remove an attached TD from queue head +static void qhd_remove_qtd(ehci_qhd_t *qhd) { + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + + qhd->attached_qtd = NULL; + qhd->attached_buffer = 0; + + qtd->used = 0; // free QTD +} + //--------------------------------------------------------------------+ // Queue TD helper //--------------------------------------------------------------------+ diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index 8338fb419..05de80539 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -289,12 +289,17 @@ enum { }; enum { - EHCI_USBCMD_POS_RUN_STOP = 0, - EHCI_USBCMD_POS_FRAMELIST_SIZE = 2, - EHCI_USBCMD_POS_PERIOD_ENABLE = 4, - EHCI_USBCMD_POS_ASYNC_ENABLE = 5, - EHCI_USBCMD_POS_NXP_FRAMELIST_SIZE_MSB = 15, - EHCI_USBCMD_POS_INTERRUPT_THRESHOLD = 16 + EHCI_USBCMD_FRAMELIST_SIZE_SHIFT = 2, // [2..3] + EHCI_USBCMD_CHIPIDEA_FRAMELIST_SIZE_MSB_SHIFT = 15, + EHCI_USBCMD_INTERRUPT_THRESHOLD_SHIFT = 16 +}; + +enum { + EHCI_USBCMD_RUN_STOP = TU_BIT(0), // [0..0] 1 = Run, 0 = Stop + EHCI_USBCMD_HCRESET = TU_BIT(1), // [1..1] SW write 1 to reset HC, clear by HC when complete + EHCI_USBCMD_PERIOD_SCHEDULE_ENABLE = TU_BIT(4), // [4..4] Enable periodic schedule + EHCI_USBCMD_ASYNC_SCHEDULE_ENABLE = TU_BIT(5), // [5..5] Enable async schedule + EHCI_USBCMD_INTR_ON_ASYNC_ADVANCE_DOORBELL = TU_BIT(6), // [6..6] Tell HC to interrupt next time it advances async list. Clear by HC }; enum { @@ -306,7 +311,7 @@ enum { EHCI_PORTSC_MASK_FORCE_RESUME = TU_BIT(6), EHCI_PORTSC_MASK_PORT_SUSPEND = TU_BIT(7), EHCI_PORTSC_MASK_PORT_RESET = TU_BIT(8), - ECHI_PORTSC_MASK_PORT_POWER = TU_BIT(12), + EHCI_PORTSC_MASK_PORT_POWER = TU_BIT(12), EHCI_PORTSC_MASK_W1C = EHCI_PORTSC_MASK_CONNECT_STATUS_CHANGE | -- cgit v1.3.1 From ef49b93532a7360703ae87d36cf463169f86f20b Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 15:46:21 +0700 Subject: rename CFG_TUSB_MEM_SECTION to CFG_TUD_MEM_SECTION in device stack CFG_TUD_MEM_SECTION is default to CFG_TUSB_MEM_SECTION --- hw/bsp/lpc40/family.cmake | 1 + hw/bsp/lpc40/family.mk | 3 +- lib/networking/rndis_reports.c | 2 +- src/class/audio/audio_device.c | 44 ++++++++++++------------ src/class/bth/bth_device.c | 2 +- src/class/cdc/cdc_device.c | 2 +- src/class/dfu/dfu_device.c | 2 +- src/class/hid/hid_device.c | 2 +- src/class/midi/midi_device.c | 2 +- src/class/msc/msc_device.c | 4 +-- src/class/net/ecm_rndis_device.c | 12 +++---- src/class/net/ncm_device.c | 6 ++-- src/class/usbtmc/usbtmc_device.c | 2 +- src/class/vendor/vendor_device.c | 2 +- src/class/video/video_device.c | 4 +-- src/device/usbd_control.c | 2 +- src/portable/bridgetek/ft9xx/dcd_ft9xx.c | 2 +- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 2 +- src/portable/chipidea/ci_hs/dcd_ci_hs.c | 2 +- src/portable/microchip/pic/dcd_pic.c | 2 +- src/portable/microchip/samx7x/dcd_samx7x.c | 2 +- src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c | 2 +- src/portable/nxp/khci/dcd_khci.c | 2 +- src/portable/nxp/lpc17_40/dcd_lpc17_40.c | 2 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 6 ++-- src/tusb_option.h | 42 ++++++---------------- 26 files changed, 68 insertions(+), 88 deletions(-) (limited to 'src') diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index 03caa4385..54410e1a7 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -38,6 +38,7 @@ function(add_board_target BOARD_TARGET) target_compile_definitions(${BOARD_TARGET} PUBLIC __USE_LPCOPEN CORE_M4 + CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\".data.$RAM2\"\)\)\) ) target_include_directories(${BOARD_TARGET} PUBLIC ${SDK_DIR}/inc diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index 47d25b885..0fc7095f5 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -9,8 +9,7 @@ CFLAGS += \ -nostdlib \ -DCORE_M4 \ -D__USE_LPCOPEN \ - -DCFG_TUD_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ - -DCFG_TUH_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ + -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \ -DCFG_TUSB_MCU=OPT_MCU_LPC40XX # mcu driver cause following warnings diff --git a/lib/networking/rndis_reports.c b/lib/networking/rndis_reports.c index cc14f174c..60afb8615 100644 --- a/lib/networking/rndis_reports.c +++ b/lib/networking/rndis_reports.c @@ -43,7 +43,7 @@ static usb_eth_stat_t usb_eth_stat = { 0, 0, 0, 0 }; static uint32_t oid_packet_filter = 0x0000000; static rndis_state_t rndis_state; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t ndis_report[8] = { 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t ndis_report[8] = { 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; static const uint32_t OIDSupportedList[] = { diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index e5dbe988a..1a7ce7870 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -113,21 +113,21 @@ // EP IN software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_IN && !CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_1; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_2; // No need for read mutex as only USB driver reads from FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_in_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_in_ff_mutex_wr_3; // No need for read mutex as only USB driver reads from FIFO #endif @@ -139,36 +139,36 @@ // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_ENCODING) #if CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_1[CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_2[CFG_TUD_AUDIO_FUNC_2_EP_IN_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_in_3[CFG_TUD_AUDIO_FUNC_3_EP_IN_SZ_MAX]; #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_IN && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // EP OUT software buffers and mutexes #if CFG_TUD_AUDIO_ENABLE_EP_OUT && !CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_1; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO_FUNC_1_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_2; // No need for write mutex as only USB driver writes into FIFO #endif #endif // CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SW_BUF_SZ > 0 #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t audio_ep_out_sw_buf_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SW_BUF_SZ]; #if CFG_FIFO_MUTEX osal_mutex_def_t ep_out_ff_mutex_rd_3; // No need for write mutex as only USB driver writes into FIFO #endif @@ -180,27 +180,27 @@ // - the software encoding is used - in this case the linear buffers serve as a target memory where logical channels are encoded into #if CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) #if CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_1[CFG_TUD_AUDIO_FUNC_1_EP_OUT_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_2[CFG_TUD_AUDIO_FUNC_2_EP_OUT_SZ_MAX]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t lin_buf_out_3[CFG_TUD_AUDIO_FUNC_3_EP_OUT_SZ_MAX]; #endif #endif // CFG_TUD_AUDIO_ENABLE_EP_OUT && (USE_LINEAR_BUFFER || CFG_TUD_AUDIO_ENABLE_DECODING) // Control buffers -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_1[CFG_TUD_AUDIO_FUNC_1_CTRL_BUF_SZ]; #if CFG_TUD_AUDIO > 1 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_2[CFG_TUD_AUDIO_FUNC_2_CTRL_BUF_SZ]; #endif #if CFG_TUD_AUDIO > 2 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t ctrl_buf_3[CFG_TUD_AUDIO_FUNC_3_CTRL_BUF_SZ]; #endif // Active alternate setting of interfaces @@ -217,7 +217,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; // Software encoding/decoding support FIFOs #if CFG_TUD_AUDIO_ENABLE_EP_IN && CFG_TUD_AUDIO_ENABLE_ENCODING #if CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_1[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -225,7 +225,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_2[CFG_TUD_AUDIO_FUNC_2_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -233,7 +233,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t tx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_TX_SUPP_SW_FIFO_SZ]; tu_fifo_t tx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t tx_supp_ff_mutex_wr_3[CFG_TUD_AUDIO_FUNC_3_N_TX_SUPP_SW_FIFO]; // No need for read mutex as only USB driver reads from FIFO @@ -243,7 +243,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT && CFG_TUD_AUDIO_ENABLE_DECODING #if CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_1[CFG_TUD_AUDIO_FUNC_1_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -251,7 +251,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 1 && CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_2_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_2[CFG_TUD_AUDIO_FUNC_2_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -259,7 +259,7 @@ uint8_t alt_setting_3[CFG_TUD_AUDIO_FUNC_3_N_AS_INT]; #endif #if CFG_TUD_AUDIO > 2 && CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ > 0 - CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; + CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN uint8_t rx_supp_ff_buf_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_3_RX_SUPP_SW_FIFO_SZ]; tu_fifo_t rx_supp_ff_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; #if CFG_FIFO_MUTEX osal_mutex_def_t rx_supp_ff_mutex_rd_3[CFG_TUD_AUDIO_FUNC_3_N_RX_SUPP_SW_FIFO]; // No need for write mutex as only USB driver writes into FIFO @@ -416,7 +416,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; +CFG_TUD_MEM_SECTION audiod_function_t _audiod_fct[CFG_TUD_AUDIO]; #if CFG_TUD_AUDIO_ENABLE_EP_OUT static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received); diff --git a/src/class/bth/bth_device.c b/src/class/bth/bth_device.c index f96bb3552..c5c74d26a 100755 --- a/src/class/bth/bth_device.c +++ b/src/class/bth/bth_device.c @@ -55,7 +55,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION btd_interface_t _btd_itf; +CFG_TUD_MEM_SECTION btd_interface_t _btd_itf; static bool bt_tx_data(uint8_t ep, void *data, uint16_t len) { diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 5adce521d..f658df4d0 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -76,7 +76,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION tu_static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; +CFG_TUD_MEM_SECTION tu_static cdcd_interface_t _cdcd_itf[CFG_TUD_CDC]; static bool _prep_out_transaction (cdcd_interface_t* p_cdc) { diff --git a/src/class/dfu/dfu_device.c b/src/class/dfu/dfu_device.c index 464c4bd6b..bffdb8376 100644 --- a/src/class/dfu/dfu_device.c +++ b/src/class/dfu/dfu_device.c @@ -56,7 +56,7 @@ typedef struct } dfu_state_ctx_t; // Only a single dfu state is allowed -CFG_TUSB_MEM_SECTION tu_static dfu_state_ctx_t _dfu_ctx; +CFG_TUD_MEM_SECTION tu_static dfu_state_ctx_t _dfu_ctx; static void reset_state(void) { diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index 9240fe2ca..5637ea6b4 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -58,7 +58,7 @@ typedef struct tusb_hid_descriptor_hid_t const * hid_descriptor; } hidd_interface_t; -CFG_TUSB_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; +CFG_TUD_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; /*------------- Helpers -------------*/ static inline uint8_t get_index_by_itfnum(uint8_t itf_num) diff --git a/src/class/midi/midi_device.c b/src/class/midi/midi_device.c index e3e7826da..052372a93 100644 --- a/src/class/midi/midi_device.c +++ b/src/class/midi/midi_device.c @@ -82,7 +82,7 @@ typedef struct //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION midid_interface_t _midid_itf[CFG_TUD_MIDI]; +CFG_TUD_MEM_SECTION midid_interface_t _midid_itf[CFG_TUD_MIDI]; bool tud_midi_n_mounted (uint8_t itf) { diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index a409c4e27..a602e9672 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -74,8 +74,8 @@ typedef struct uint8_t add_sense_qualifier; }mscd_interface_t; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION diff --git a/src/class/net/ecm_rndis_device.c b/src/class/net/ecm_rndis_device.c index 8ac7cbd01..762425732 100644 --- a/src/class/net/ecm_rndis_device.c +++ b/src/class/net/ecm_rndis_device.c @@ -61,10 +61,10 @@ typedef struct #define CFG_TUD_NET_PACKET_PREFIX_LEN sizeof(rndis_data_packet_t) #define CFG_TUD_NET_PACKET_SUFFIX_LEN 0 -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t received[CFG_TUD_NET_PACKET_PREFIX_LEN + CFG_TUD_NET_MTU + CFG_TUD_NET_PACKET_PREFIX_LEN]; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t transmitted[CFG_TUD_NET_PACKET_PREFIX_LEN + CFG_TUD_NET_MTU + CFG_TUD_NET_PACKET_PREFIX_LEN]; struct ecm_notify_struct @@ -94,8 +94,8 @@ tu_static const struct ecm_notify_struct ecm_notify_csc = .uplink = 9728000, }; -// TODO remove CFG_TUSB_MEM_SECTION, control internal buffer is already in this special section -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union +// TODO remove CFG_TUD_MEM_SECTION, control internal buffer is already in this special section +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union { uint8_t rndis_buf[120]; struct ecm_notify_struct ecm_buf; @@ -104,8 +104,8 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static union //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -// TODO remove CFG_TUSB_MEM_SECTION -CFG_TUSB_MEM_SECTION tu_static netd_interface_t _netd_itf; +// TODO remove CFG_TUD_MEM_SECTION +CFG_TUD_MEM_SECTION tu_static netd_interface_t _netd_itf; tu_static bool can_xmit; diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 9e9580249..611dc3348 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -130,7 +130,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { .wLength = sizeof(ntb_parameters_t), .bmNtbFormatsSupported = 0x01, .dwNtbInMaxSize = CFG_TUD_NCM_IN_NTB_MAX_SIZE, @@ -145,9 +145,9 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_par .wNtbOutMaxDatagrams = 0 }; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static transmit_ntb_t transmit_ntb[2]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static transmit_ntb_t transmit_ntb[2]; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t receive_ntb[CFG_TUD_NCM_OUT_NTB_MAX_SIZE]; +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t receive_ntb[CFG_TUD_NCM_OUT_NTB_MAX_SIZE]; tu_static ncm_interface_t ncm_interface; diff --git a/src/class/usbtmc/usbtmc_device.c b/src/class/usbtmc/usbtmc_device.c index 4e320a778..573654d58 100644 --- a/src/class/usbtmc/usbtmc_device.c +++ b/src/class/usbtmc/usbtmc_device.c @@ -143,7 +143,7 @@ typedef struct usbtmc_capabilities_specific_t const * capabilities; } usbtmc_interface_state_t; -CFG_TUSB_MEM_SECTION tu_static usbtmc_interface_state_t usbtmc_state = +CFG_TUD_MEM_SECTION tu_static usbtmc_interface_state_t usbtmc_state = { .itf_id = 0xFF, }; diff --git a/src/class/vendor/vendor_device.c b/src/class/vendor/vendor_device.c index 93596ee33..389a29696 100644 --- a/src/class/vendor/vendor_device.c +++ b/src/class/vendor/vendor_device.c @@ -59,7 +59,7 @@ typedef struct CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_VENDOR_EPSIZE]; } vendord_interface_t; -CFG_TUSB_MEM_SECTION tu_static vendord_interface_t _vendord_itf[CFG_TUD_VENDOR]; +CFG_TUD_MEM_SECTION tu_static vendord_interface_t _vendord_itf[CFG_TUD_VENDOR]; #define ITF_MEM_RESET_SIZE offsetof(vendord_interface_t, rx_ff) diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index 91f452afc..e6fadf41b 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -130,8 +130,8 @@ typedef struct TU_ATTR_PACKED { //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -CFG_TUSB_MEM_SECTION tu_static videod_interface_t _videod_itf[CFG_TUD_VIDEO]; -CFG_TUSB_MEM_SECTION tu_static videod_streaming_interface_t _videod_streaming_itf[CFG_TUD_VIDEO_STREAMING]; +CFG_TUD_MEM_SECTION tu_static videod_interface_t _videod_itf[CFG_TUD_VIDEO]; +CFG_TUD_MEM_SECTION tu_static videod_streaming_interface_t _videod_streaming_itf[CFG_TUD_VIDEO_STREAMING]; tu_static uint8_t const _cap_get = 0x1u; /* support for GET */ tu_static uint8_t const _cap_get_set = 0x3u; /* support for GET and SET */ diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index c580e6ecf..76d062e40 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -55,7 +55,7 @@ typedef struct tu_static usbd_control_xfer_t _ctrl_xfer; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE]; //--------------------------------------------------------------------+ diff --git a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c index 95dfda49c..f02415904 100644 --- a/src/portable/bridgetek/ft9xx/dcd_ft9xx.c +++ b/src/portable/bridgetek/ft9xx/dcd_ft9xx.c @@ -51,7 +51,7 @@ extern int8_t board_ft9xx_vbus(void); extern int board_uart_write(void const *buf, int len); // Static array to store an incoming SETUP request for processing by tinyusb. -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN +CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN static uint8_t _ft9xx_setup_packet[8]; struct ft9xx_xfer_state diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 37265df8b..9327e09d8 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -116,7 +116,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/chipidea/ci_hs/dcd_ci_hs.c b/src/portable/chipidea/ci_hs/dcd_ci_hs.c index f50550d33..f9ec666e5 100644 --- a/src/portable/chipidea/ci_hs/dcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/dcd_ci_hs.c @@ -175,7 +175,7 @@ typedef struct { dcd_qtd_t qtd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32); }dcd_data_t; -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048) +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(2048) static dcd_data_t _dcd_data; //--------------------------------------------------------------------+ diff --git a/src/portable/microchip/pic/dcd_pic.c b/src/portable/microchip/pic/dcd_pic.c index 6986c8317..ccc27c3c9 100644 --- a/src/portable/microchip/pic/dcd_pic.c +++ b/src/portable/microchip/pic/dcd_pic.c @@ -189,7 +189,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) volatile static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) volatile static dcd_data_t _dcd; #if TU_PIC_INT_SIZE == 4 TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/microchip/samx7x/dcd_samx7x.c b/src/portable/microchip/samx7x/dcd_samx7x.c index 2bbb345d6..9586df84d 100644 --- a/src/portable/microchip/samx7x/dcd_samx7x.c +++ b/src/portable/microchip/samx7x/dcd_samx7x.c @@ -77,7 +77,7 @@ static tusb_speed_t get_speed(void); static void dcd_transmit_packet(xfer_ctl_t * xfer, uint8_t ep_ix); // DMA descriptors shouldn't be placed in ITCM ! -CFG_TUSB_MEM_SECTION static dma_desc_t dma_desc[6]; +CFG_TUD_MEM_SECTION static dma_desc_t dma_desc[6]; static xfer_ctl_t xfer_status[EP_MAX]; diff --git a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c index 39b09db68..c3d0c7297 100644 --- a/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c +++ b/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c @@ -110,7 +110,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 52f4145f2..5c65ea33d 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -114,7 +114,7 @@ typedef struct // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ // BDT(Buffer Descriptor Table) must be 256-byte aligned -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(512) static dcd_data_t _dcd; TU_VERIFY_STATIC( sizeof(_dcd.bdt) == 512, "size is not correct" ); diff --git a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c index 86149afd8..b880c2870 100644 --- a/src/portable/nxp/lpc17_40/dcd_lpc17_40.c +++ b/src/portable/nxp/lpc17_40/dcd_lpc17_40.c @@ -92,7 +92,7 @@ typedef struct } dcd_data_t; -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(128) static dcd_data_t _dcd; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(128) static dcd_data_t _dcd; //--------------------------------------------------------------------+ diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 5368ef868..7ca698a93 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -176,11 +176,11 @@ typedef struct // EP list must be 256-byte aligned // Some MCU controller may require this variable to be placed in specific SRAM region. // For example: LPC55s69 port1 Highspeed must be USB_RAM (0x40100000) -// Use CFG_TUSB_MEM_SECTION to place it accordingly. -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; +// Use CFG_TUD_MEM_SECTION to place it accordingly. +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; // Dummy buffer to fix ZLPs overwriting the buffer (probably an USB/DMA controller bug) -CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; +CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; //--------------------------------------------------------------------+ // Multiple Controllers diff --git a/src/tusb_option.h b/src/tusb_option.h index c792efe6a..7a4cfe51c 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -295,15 +295,14 @@ #define CFG_TUSB_DEBUG 0 #endif -// TODO MEM_SECTION can be different for host and device controller -// should use CFG_TUD_MEM_SECTION, CFG_TUH_MEM_SECTION +// Memory section for placing buffer used for usb transferring. If MEM_SECTION is different for +// host and device use: CFG_TUD_MEM_SECTION, CFG_TUH_MEM_SECTION instead #ifndef CFG_TUSB_MEM_SECTION #define CFG_TUSB_MEM_SECTION #endif -// alignment requirement of buffer used for endpoint transferring -// TODO MEM_ALIGN can be different for host and device controller -// should use CFG_TUD_MEM_ALIGN, CFG_TUH_MEM_ALIGN +// Alignment requirement of buffer used for usb transferring. if MEM_ALIGN is different for +// host and device controller use: CFG_TUD_MEM_ALIGN, CFG_TUH_MEM_ALIGN instead #ifndef CFG_TUSB_MEM_ALIGN #define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4) #endif @@ -321,24 +320,14 @@ // Device Options (Default) //-------------------------------------------------------------------- -// Attribute to place data in accessible RAM for device controller -// default to CFG_TUSB_MEM_SECTION for backward-compatible +// Attribute to place data in accessible RAM for device controller (default: CFG_TUSB_MEM_SECTION) #ifndef CFG_TUD_MEM_SECTION - #ifdef CFG_TUSB_MEM_SECTION - #define CFG_TUD_MEM_SECTION CFG_TUSB_MEM_SECTION - #else - #define CFG_TUD_MEM_SECTION - #endif + #define CFG_TUD_MEM_SECTION CFG_TUSB_MEM_SECTION #endif -// Attribute to align memory for device controller -// default to CFG_TUSB_MEM_ALIGN for backward-compatible +// Attribute to align memory for device controller (default: CFG_TUSB_MEM_ALIGN) #ifndef CFG_TUD_MEM_ALIGN - #ifdef CFG_TUSB_MEM_ALIGN - #define CFG_TUD_MEM_ALIGN CFG_TUSB_MEM_ALIGN - #else - #define CFG_TUD_MEM_ALIGN TU_ATTR_ALIGNED(4) - #endif + #define CFG_TUD_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif #ifndef CFG_TUD_ENDPOINT0_SIZE @@ -419,23 +408,14 @@ #endif #endif // CFG_TUH_ENABLED -// Attribute to place data in accessible RAM for host controller -// default to CFG_TUSB_MEM_SECTION for backward-compatible +// Attribute to place data in accessible RAM for host controller (default: CFG_TUSB_MEM_SECTION) #ifndef CFG_TUH_MEM_SECTION - #ifdef CFG_TUSB_MEM_SECTION - #define CFG_TUH_MEM_SECTION CFG_TUSB_MEM_SECTION - #else - #define CFG_TUH_MEM_SECTION - #endif + #define CFG_TUH_MEM_SECTION CFG_TUSB_MEM_SECTION #endif // Attribute to align memory for host controller #ifndef CFG_TUH_MEM_ALIGN - #ifdef CFG_TUSB_MEM_ALIGN - #define CFG_TUH_MEM_ALIGN CFG_TUSB_MEM_ALIGN - #else - #define CFG_TUH_MEM_ALIGN TU_ATTR_ALIGNED(4) - #endif + #define CFG_TUH_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif //------------- CLASS -------------// -- cgit v1.3.1 From 14a7379799418c6e8ffb7231ee1703a0f95665da Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 16:54:02 +0700 Subject: fix ohci warnings, and add freertosconfig for lpc4088 --- hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h | 165 +++++++++++++++++++++++++++ hw/bsp/lpc40/family.cmake | 2 + src/portable/ohci/ohci.c | 25 ++-- 3 files changed, 182 insertions(+), 10 deletions(-) create mode 100644 hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h (limited to 'src') diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..96611ca1c --- /dev/null +++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "chip.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 5 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<is_interrupt_xfer = (xfer_type == TUSB_XFER_INTERRUPT ? 1 : 0); } -static void gtd_init(ohci_gtd_t* p_td, uint8_t* data_ptr, uint16_t total_bytes) -{ +static void gtd_init(ohci_gtd_t *p_td, uint8_t *data_ptr, uint16_t total_bytes) { tu_memclr(p_td, sizeof(ohci_gtd_t)); - p_td->used = 1; - p_td->expected_bytes = total_bytes; + p_td->used = 1; + p_td->expected_bytes = total_bytes; + + p_td->buffer_rounding = 1; // less than queued length is not a error + p_td->delay_interrupt = OHCI_INT_ON_COMPLETE_NO; + p_td->condition_code = OHCI_CCODE_NOT_ACCESSED; - p_td->buffer_rounding = 1; // less than queued length is not a error - p_td->delay_interrupt = OHCI_INT_ON_COMPLETE_NO; - p_td->condition_code = OHCI_CCODE_NOT_ACCESSED; + uint8_t *cbp = (uint8_t *) _phys_addr(data_ptr); - p_td->current_buffer_pointer = _phys_addr(data_ptr); - p_td->buffer_end = total_bytes ? (_phys_addr(data_ptr + total_bytes - 1)) : (uint8_t *)p_td->current_buffer_pointer; + p_td->current_buffer_pointer = cbp; + if ( total_bytes ) { + p_td->buffer_end = _phys_addr(data_ptr + total_bytes - 1); + } else { + p_td->buffer_end = cbp; + } } static ohci_ed_t * ed_from_addr(uint8_t dev_addr, uint8_t ep_addr) @@ -487,7 +492,7 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet ohci_ed_t* ed = &ohci_data.control[dev_addr].ed; ohci_gtd_t *qtd = &ohci_data.control[dev_addr].gtd; - gtd_init(qtd, (uint8_t*) setup_packet, 8); + gtd_init(qtd, (uint8_t*)(uintptr_t) setup_packet, 8); qtd->index = dev_addr; qtd->pid = PID_SETUP; qtd->data_toggle = GTD_DT_DATA0; -- cgit v1.3.1 From d2542560470de242dd8988d0b3c10d7df0496bb0 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 17:54:24 +0700 Subject: change dcache clean/invalidate return type to bool add tu_assert() check for aligned 32byte address for imxrt --- src/common/tusb_common.h | 13 +++++++------ src/host/hcd.h | 8 ++++---- src/portable/chipidea/ci_hs/ci_hs_imxrt.h | 15 +++++++++------ src/portable/chipidea/ci_hs/hcd_ci_hs.c | 12 ++++++------ src/portable/ehci/ehci.c | 9 ++++++--- 5 files changed, 32 insertions(+), 25 deletions(-) (limited to 'src') diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 957491aa9..bae583c06 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -99,10 +99,9 @@ TU_ATTR_WEAK extern void* tusb_app_phys_to_virt(void *phys_addr); #define tu_varclr(_var) tu_memclr(_var, sizeof(*(_var))) // This is a backport of memset_s from c11 -TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, int ch, size_t count) -{ +TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, int ch, size_t count) { // TODO may check if desst and src is not NULL - if (count > destsz) { + if ( count > destsz ) { return -1; } memset(dest, ch, count); @@ -110,10 +109,9 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memset_s(void *dest, size_t destsz, i } // This is a backport of memcpy_s from c11 -TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void * src, size_t count ) -{ +TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, const void *src, size_t count) { // TODO may check if desst and src is not NULL - if (count > destsz) { + if ( count > destsz ) { return -1; } memcpy(dest, src, count); @@ -169,6 +167,9 @@ TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align32 (uint32_t value) { retur TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align4k (uint32_t value) { return (value & 0xFFFFF000UL); } TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_offset4k(uint32_t value) { return (value & 0xFFFUL); } +TU_ATTR_ALWAYS_INLINE static inline bool tu_is_aligned32(uint32_t value) { return (value & 0x1FUL) == 0; } +TU_ATTR_ALWAYS_INLINE static inline bool tu_is_aligned64(uint64_t value) { return (value & 0x3FUL) == 0; } + //------------- Mathematics -------------// TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_div_ceil(uint32_t v, uint32_t d) { return (v + d -1)/d; } diff --git a/src/host/hcd.h b/src/host/hcd.h index 3355c18b2..52fcc834e 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -104,21 +104,21 @@ typedef struct uint8_t speed; } hcd_devtree_info_t; -//--------------------------------------------------------------------+ +//-------------------------------------------------------------- // Memory API //--------------------------------------------------------------------+ // clean/flush data cache: write cache -> memory. // Required before an DMA TX transfer to make sure data is in memory -void hcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK; // invalidate data cache: mark cache as invalid, next read will read from memory // Required BOTH before and after an DMA RX transfer -void hcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; // clean and invalidate data cache // Required before an DMA transfer where memory is both read/write by DMA -void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; +bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK; //--------------------------------------------------------------------+ // Controller API diff --git a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h index 96f0ba766..c59c107ff 100644 --- a/src/portable/chipidea/ci_hs/ci_hs_imxrt.h +++ b/src/portable/chipidea/ci_hs/ci_hs_imxrt.h @@ -68,31 +68,34 @@ TU_ATTR_ALWAYS_INLINE static inline bool imxrt_is_cache_mem(uintptr_t addr) { return !(0x20000000 <= addr && addr < 0x20100000); } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); SCB_CleanDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); } + return true; } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { // Invalidating does not push cached changes back to RAM so we need to be // *very* careful when we do it. If we're not aligned, then we risk resetting // values back to their RAM state. - // if (addr32 % 32 != 0) { - // TU_BREAKPOINT(); - // } + TU_ASSERT(tu_is_aligned32(addr32)); SCB_InvalidateDCache_by_Addr((void*) addr32, (int32_t) data_size); } + return true; } -TU_ATTR_ALWAYS_INLINE static inline void imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_ALWAYS_INLINE static inline bool imxrt_dcache_clean_invalidate(void const* addr, uint32_t data_size) { const uintptr_t addr32 = (uintptr_t) addr; if (imxrt_is_cache_mem(addr32)) { + TU_ASSERT(tu_is_aligned32(addr32)); SCB_CleanInvalidateDCache_by_Addr((uint32_t *) addr32, (int32_t) data_size); } + return true; } #endif diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 56167b8f6..6ee91e18e 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -41,16 +41,16 @@ #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX #include "ci_hs_imxrt.h" - void hcd_dcache_clean(void const* addr, uint32_t data_size) { - imxrt_dcache_clean(addr, data_size); + bool hcd_dcache_clean(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean(addr, data_size); } - void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_invalidate(addr, data_size); + bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_invalidate(addr, data_size); } - void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - imxrt_dcache_clean_invalidate(addr, data_size); + bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean_invalidate(addr, data_size); } #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 38711e382..6dfaab2a2 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -162,16 +162,19 @@ static void qtd_init (ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) static inline void list_insert (ehci_link_t *current, ehci_link_t *new, uint8_t new_type); static inline ehci_link_t* list_next (ehci_link_t const *p_link); -TU_ATTR_WEAK void hcd_dcache_clean(void const* addr, uint32_t data_size) { +TU_ATTR_WEAK bool hcd_dcache_clean(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; + return true; } -TU_ATTR_WEAK void hcd_dcache_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_WEAK bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; + return true; } -TU_ATTR_WEAK void hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { +TU_ATTR_WEAK bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { (void) addr; (void) data_size; + return true; } //--------------------------------------------------------------------+ -- cgit v1.3.1 From fd29fd923a0a64be96fe4bdfa2a5fa9f184ea6c7 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 20:53:44 +0700 Subject: clean up --- src/host/hcd.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src') diff --git a/src/host/hcd.h b/src/host/hcd.h index 52fcc834e..a98286053 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -104,7 +104,7 @@ typedef struct uint8_t speed; } hcd_devtree_info_t; -//-------------------------------------------------------------- +//--------------------------------------------------------------------+ // Memory API //--------------------------------------------------------------------+ -- cgit v1.3.1 From f295aaf1851eb270070af7292d1f100f7172daf4 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 11:55:54 +0700 Subject: add hcd abort xfer for rp2040 pio usb --- hw/bsp/rp2040/board.h | 12 ++++++------ src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 7 ++----- tools/get_deps.py | 2 +- 3 files changed, 9 insertions(+), 12 deletions(-) (limited to 'src') diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index 934e1c7ae..063c9580e 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -54,19 +54,19 @@ // default to pin on Adafruit Feather rp2040 USB Host or Tester if defined //--------------------------------------------------------------------+ -// #define USE_ADAFRUIT_RP2040_TESTER -#ifdef USE_ADAFRUIT_RP2040_TESTER -#define PICO_DEFAULT_PIO_USB_DP_PIN 20 -#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN 22 +// #define USE_ADAFRUIT_FEATHER_RP2040_USBHOST +#ifdef USE_ADAFRUIT_FEATHER_RP2040_USBHOST +#define PICO_DEFAULT_PIO_USB_DP_PIN 16 +#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN 18 #endif #ifndef PICO_DEFAULT_PIO_USB_DP_PIN -#define PICO_DEFAULT_PIO_USB_DP_PIN 16 +#define PICO_DEFAULT_PIO_USB_DP_PIN 20 #endif // VBUS enable pin and its active state #ifndef PICO_DEFAULT_PIO_USB_VBUSEN_PIN -#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN 18 +#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN 22 #endif // VBUS enable state diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index fa285327c..bb41ad638 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -139,11 +139,8 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * } bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { - (void) rhport; - (void) dev_addr; - (void) ep_addr; - // TODO not implemented yet - return false; + uint8_t const pio_rhport = RHPORT_PIO(rhport); + return pio_usb_host_endpoint_abort_transfer(pio_rhport, dev_addr, ep_addr); } bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) diff --git a/tools/get_deps.py b/tools/get_deps.py index 9b89c5e4c..d6505a1d9 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -54,7 +54,7 @@ deps_optional = { '950819b7de9b32f92c3edf396bc5ffb8d66e7009', 'kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', - '58879cfa0eca5725d8db6443ec17f8896a321042', + 'd00a10a8c425d0d40f81b87169102944b01f3bb3', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', '8dc14709f2a6518b43f71efad70d900b7718d9f1', -- cgit v1.3.1 From ef69da054e4d373636818a52df4e3433152fa3bf Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Jul 2023 12:03:54 +0700 Subject: use standard EHCI USB INT instead of chipidea async/period interrupt to be compatible with other EHCI implementation --- src/portable/ehci/ehci.c | 24 ++++++++---------------- src/portable/ehci/ehci.h | 6 +----- 2 files changed, 9 insertions(+), 21 deletions(-) (limited to 'src') diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 241393a39..a9e184f22 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -307,8 +307,8 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) regs->status = (EHCI_INT_MASK_ALL & ~EHCI_INT_MASK_PORT_CHANGE); // Enable interrupts - regs->inten = EHCI_INT_MASK_ERROR | EHCI_INT_MASK_PORT_CHANGE | EHCI_INT_MASK_ASYNC_ADVANCE | - EHCI_INT_MASK_NXP_PERIODIC | EHCI_INT_MASK_NXP_ASYNC | EHCI_INT_MASK_FRAMELIST_ROLLOVER; + regs->inten = EHCI_INT_MASK_USB | EHCI_INT_MASK_ERROR | EHCI_INT_MASK_PORT_CHANGE | + EHCI_INT_MASK_ASYNC_ADVANCE | EHCI_INT_MASK_FRAMELIST_ROLLOVER; //------------- Asynchronous List -------------// ehci_qhd_t * const async_head = list_get_async_head(rhport); @@ -768,28 +768,20 @@ void hcd_int_handler(uint8_t rhport) regs->status = EHCI_INT_MASK_PORT_CHANGE; // Acknowledge } + // A USB transfer is completed with error if (int_status & EHCI_INT_MASK_ERROR) { xfer_error_isr(rhport); regs->status = EHCI_INT_MASK_ERROR; // Acknowledge } - //------------- some QTD/SITD/ITD with IOC set is completed -------------// - if (int_status & EHCI_INT_MASK_NXP_ASYNC) { - async_list_xfer_complete_isr(list_get_async_head(rhport)); - regs->status = EHCI_INT_MASK_NXP_ASYNC; // Acknowledge - } - - if (int_status & EHCI_INT_MASK_NXP_PERIODIC) - { - for (uint32_t i=1; i <= FRAMELIST_SIZE; i *= 2) - { + // A USB transfer is completed + if (int_status & EHCI_INT_MASK_USB) { + for ( uint32_t i = 1; i <= FRAMELIST_SIZE; i *= 2 ) { period_list_xfer_complete_isr(rhport, i); } - regs->status = EHCI_INT_MASK_NXP_PERIODIC; // Acknowledge - } - if (int_status & EHCI_INT_MASK_USB) { - // TODO standard EHCI xfer complete + async_list_xfer_complete_isr(list_get_async_head(rhport)); + regs->status = EHCI_INT_MASK_USB; // Acknowledge } diff --git a/src/portable/ehci/ehci.h b/src/portable/ehci/ehci.h index 05de80539..457adc1d3 100644 --- a/src/portable/ehci/ehci.h +++ b/src/portable/ehci/ehci.h @@ -278,14 +278,10 @@ enum { EHCI_INT_MASK_PERIODIC_SCHED_STATUS = TU_BIT(14), EHCI_INT_MASK_ASYNC_SCHED_STATUS = TU_BIT(15), - EHCI_INT_MASK_NXP_ASYNC = TU_BIT(18), - EHCI_INT_MASK_NXP_PERIODIC = TU_BIT(19), - EHCI_INT_MASK_ALL = EHCI_INT_MASK_USB | EHCI_INT_MASK_ERROR | EHCI_INT_MASK_PORT_CHANGE | EHCI_INT_MASK_FRAMELIST_ROLLOVER | EHCI_INT_MASK_PCI_HOST_SYSTEM_ERROR | - EHCI_INT_MASK_ASYNC_ADVANCE | EHCI_INT_MASK_NXP_SOF | - EHCI_INT_MASK_NXP_ASYNC | EHCI_INT_MASK_NXP_PERIODIC + EHCI_INT_MASK_ASYNC_ADVANCE | EHCI_INT_MASK_NXP_SOF }; enum { -- cgit v1.3.1 From dc74e634f93962512229ba7d4e14467c16125c0d Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Jul 2023 12:35:40 +0700 Subject: fix unaligned hub status_change --- src/host/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src') diff --git a/src/host/hub.c b/src/host/hub.c index 182bd6ce8..16dd534d2 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -45,8 +45,8 @@ typedef struct uint8_t itf_num; uint8_t ep_in; uint8_t port_count; - uint8_t status_change; // data from status change interrupt endpoint + CFG_TUH_MEM_ALIGN uint8_t status_change; CFG_TUH_MEM_ALIGN hub_port_status_response_t port_status; CFG_TUH_MEM_ALIGN hub_status_response_t hub_status; } hub_interface_t; -- cgit v1.3.1 From 4deea875793ce78a24b069491bb83e59e310c476 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Jul 2023 15:07:21 +0700 Subject: improve processing usb complete and error isr. also merge them together --- hw/bsp/imxrt/family.cmake | 120 ++++++++++++------------ src/CMakeLists.txt | 1 + src/portable/ehci/ehci.c | 228 ++++++++++++---------------------------------- 3 files changed, 120 insertions(+), 229 deletions(-) (limited to 'src') diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index f1c5b0ab1..96ed4b030 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -22,69 +22,71 @@ set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/clock_config.c - #${SDK_DIR}/drivers/adc_12b1msps_sar/fsl_adc.c - ${SDK_DIR}/drivers/common/fsl_common.c - ${SDK_DIR}/drivers/igpio/fsl_gpio.c - ${SDK_DIR}/drivers/lpspi/fsl_lpspi.c - ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c - ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - __ARMVFP__=0 - __ARMFPV5__=0 - XIP_EXTERNAL_FLASH=1 - XIP_BOOT_HEADER_ENABLE=1 - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers - #${SDK_DIR}/drivers/adc_12b1msps_sar - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/igpio - ${SDK_DIR}/drivers/lpspi - ${SDK_DIR}/drivers/lpuart - ) + if (TARGET ${BOARD_TARGET}) + return() + endif () - update_board(${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/clock_config.c + #${SDK_DIR}/drivers/adc_12b1msps_sar/fsl_adc.c + ${SDK_DIR}/drivers/common/fsl_common.c + ${SDK_DIR}/drivers/igpio/fsl_gpio.c + ${SDK_DIR}/drivers/lpspi/fsl_lpspi.c + ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c + ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __ARMVFP__=0 + __ARMFPV5__=0 + XIP_EXTERNAL_FLASH=1 + XIP_BOOT_HEADER_ENABLE=1 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + #${SDK_DIR}/drivers/adc_12b1msps_sar + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/igpio + ${SDK_DIR}/drivers/lpspi + ${SDK_DIR}/drivers/lpuart + ) - # LD_FILE and STARTUP_FILE can be defined in board.cmake - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) - #set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) - endif () + update_board(${BOARD_TARGET}) - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) - #set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) - endif () + # LD_FILE and STARTUP_FILE can be defined in board.cmake + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) + #set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld) + endif () - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) + #set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) + endif () - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - # force linker to look for these symbols - -Wl,-uimage_vector_table - -Wl,-ug_boot_data - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + # force linker to look for these symbols + -Wl,-uimage_vector_table + -Wl,-ug_boot_data + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) endif () endfunction() @@ -114,7 +116,7 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX ${RTOS}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET}-tinyusb PRIVATE ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 8f7f38589..076e1e1eb 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -64,6 +64,7 @@ function(add_tinyusb TARGET) -Wnull-dereference -Wuninitialized -Wunused + -Wunused-function -Wreturn-type -Wredundant-decls ) diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index a9e184f22..b84de5191 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -314,11 +314,11 @@ bool ehci_init(uint8_t rhport, uint32_t capability_reg, uint32_t operatial_reg) ehci_qhd_t * const async_head = list_get_async_head(rhport); tu_memclr(async_head, sizeof(ehci_qhd_t)); - async_head->next.address = (uint32_t) async_head; // circular list, next is itself - async_head->next.type = EHCI_QTYPE_QHD; - async_head->head_list_flag = 1; - async_head->qtd_overlay.halted = 1; // inactive most of time - async_head->qtd_overlay.next.terminate = 1; // TODO removed if verified + async_head->next.address = (uint32_t) async_head; // circular list, next is itself + async_head->next.type = EHCI_QTYPE_QHD; + async_head->head_list_flag = 1; + async_head->qtd_overlay.halted = 1; // inactive most of time + async_head->qtd_overlay.next.terminate = 1; // TODO removed if verified regs->async_list_addr = (uint32_t) async_head; @@ -533,70 +533,74 @@ void async_advance_isr(uint8_t rhport) } TU_ATTR_ALWAYS_INLINE static inline -void port_connect_status_change_isr(uint8_t rhport) -{ +void port_connect_status_change_isr(uint8_t rhport) { // NOTE There is an sequence plug->unplug->…..-> plug if device is powering with pre-plugged device - if (ehci_data.regs->portsc_bm.current_connect_status) - { + if ( ehci_data.regs->portsc_bm.current_connect_status ) { hcd_port_reset(rhport); hcd_event_device_attach(rhport, true); - }else // device unplugged + } else // device unplugged { hcd_event_device_remove(rhport, true); } } +// Check queue head for potential transfer complete (successful or error) TU_ATTR_ALWAYS_INLINE static inline void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { - // examine TD attached to queue head - ehci_qtd_t * volatile qtd = qhd->attached_qtd; + hcd_dcache_invalidate(qhd, sizeof(ehci_qhd_t)); // HC may have updated the overlay + volatile ehci_qtd_t *qtd_overlay = &qhd->qtd_overlay; - if (qtd == NULL) { - return; // no TD attached - } + // process non-active (completed) QHD with attached (scheduled) TD + if ( !qtd_overlay->active && qhd->attached_qtd != NULL ) { + xfer_result_t xfer_result; - hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); + if ( qtd_overlay->halted ) { + if (qtd_overlay->xact_err || qtd_overlay->err_count == 0 || qtd_overlay->buffer_err || qtd_overlay->babble_err) { + // Error count = 0 often occurs when device disconnected, or other bus-related error + xfer_result = XFER_RESULT_FAILED; + TU_LOG3(" QHD xfer err count: %d\n", qtd_overlay->err_count); + // TU_BREAKPOINT(); // TODO skip unplugged device + }else { + // no error bits are set, endpoint is halted due to STALL + xfer_result = XFER_RESULT_STALLED; + } + } else { + xfer_result = XFER_RESULT_SUCCESS; + } - // TD is still active, no need to process - if (qtd->active) { - return; - } + ehci_qtd_t * volatile qtd = qhd->attached_qtd; + hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); // HC may have written back TD - uint8_t dir = (qtd->pid == EHCI_PID_IN) ? 1 : 0; - uint32_t const xferred_bytes = qtd->expected_bytes - qtd->total_bytes; + uint8_t const dir = (qtd->pid == EHCI_PID_IN) ? 1 : 0; + uint32_t const xferred_bytes = qtd->expected_bytes - qtd->total_bytes; - // invalidate dcache if IN transfer - if (dir == 1 && qhd->attached_buffer != 0 && xferred_bytes > 0) { - hcd_dcache_invalidate((void*) qhd->attached_buffer, xferred_bytes); - } + // invalidate dcache if IN transfer with data + if (dir == 1 && qhd->attached_buffer != 0 && xferred_bytes > 0) { + hcd_dcache_invalidate((void*) qhd->attached_buffer, xferred_bytes); + } - // remove and free TD before invoking callback - qhd_remove_qtd(qhd); + // remove and free TD before invoking callback + qhd_remove_qtd(qhd); - // notify usbh - uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); - hcd_event_xfer_complete(qhd->dev_addr, ep_addr, xferred_bytes, XFER_RESULT_SUCCESS, true); + // notify usbh + uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); + hcd_event_xfer_complete(qhd->dev_addr, ep_addr, xferred_bytes, xfer_result, true); + } } TU_ATTR_ALWAYS_INLINE static inline -void async_list_xfer_complete_isr(ehci_qhd_t * const async_head) +void proccess_async_xfer_isr(ehci_qhd_t * const list_head) { - ehci_qhd_t *p_qhd = async_head; - do - { - hcd_dcache_invalidate(p_qhd, sizeof(ehci_qhd_t)); - - // halted or error is processed in error isr - if ( !p_qhd->qtd_overlay.halted ) { - qhd_xfer_complete_isr(p_qhd); - } + ehci_qhd_t *qhd = list_head; - p_qhd = qhd_next(p_qhd); - }while(p_qhd != async_head); // async list traversal, stop if loop around + do { + qhd_xfer_complete_isr(qhd); + qhd = qhd_next(qhd); + } while ( qhd != list_head ); // async list traversal, stop if loop around } TU_ATTR_ALWAYS_INLINE static inline -void period_list_xfer_complete_isr(uint8_t rhport, uint32_t interval_ms) +void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) { uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u); ehci_link_t next_link = *list_get_period_head(rhport, interval_ms); @@ -612,22 +616,13 @@ void period_list_xfer_complete_isr(uint8_t rhport, uint32_t interval_ms) switch (next_link.type) { case EHCI_QTYPE_QHD: { ehci_qhd_t *qhd = (ehci_qhd_t *) entry_addr; - hcd_dcache_invalidate(qhd, sizeof(ehci_qhd_t)); - - if (!qhd->qtd_overlay.halted) { - qhd_xfer_complete_isr(qhd); - } + qhd_xfer_complete_isr(qhd); } break; + // TODO support hs/fs ISO case EHCI_QTYPE_ITD: - // TODO support hs ISO - break; - case EHCI_QTYPE_SITD: - // TODO support split ISO - break; - case EHCI_QTYPE_FSTN: default: break; @@ -637,106 +632,6 @@ void period_list_xfer_complete_isr(uint8_t rhport, uint32_t interval_ms) } } -// TODO merge with qhd_xfer_complete_isr() -TU_ATTR_ALWAYS_INLINE static inline -void qhd_xfer_error_isr(ehci_qhd_t * qhd) -{ - volatile ehci_qtd_t *qtd_overlay = &qhd->qtd_overlay; - - // TD has error - if (qtd_overlay->halted) { - xfer_result_t xfer_result; - - if (qtd_overlay->xact_err || qtd_overlay->err_count == 0 || qtd_overlay->buffer_err || qtd_overlay->babble_err) { - // Error count = 0 often occurs when device disconnected, or other bus-related error - xfer_result = XFER_RESULT_FAILED; - }else { - // no error bits are set, endpoint is halted due to STALL - xfer_result = XFER_RESULT_STALLED; - } - -// if (XFER_RESULT_FAILED == xfer_result ) { -// TU_LOG1(" QHD xfer err count: %d\n", qtd_overlay->err_count); -// TU_BREAKPOINT(); // TODO skip unplugged device -// } - - ehci_qtd_t * volatile qtd = (ehci_qtd_t * volatile) qhd->attached_qtd; - TU_ASSERT(qtd, ); // No TD yet, probably a race condition or cache issue !? - - hcd_dcache_invalidate(qtd, sizeof(ehci_qtd_t)); - - uint8_t dir = (qtd->pid == EHCI_PID_IN) ? 1 : 0; - uint32_t const xferred_bytes = qtd->expected_bytes - qtd->total_bytes; - - // invalidate dcache if IN transfer - if (dir == 1 && qhd->attached_buffer != 0 && xferred_bytes > 0) { - hcd_dcache_invalidate((void*) qhd->attached_buffer, xferred_bytes); - } - - // remove and free TD before invoking callback - qhd_remove_qtd(qhd); - - if (0 == qhd->ep_number ) { - // control cannot be halted - qhd->qtd_overlay.next.terminate = 1; - qhd->qtd_overlay.alternate.terminate = 1; - qhd->qtd_overlay.halted = 0; - - hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); - } - - // notify usbh - uint8_t const ep_addr = tu_edpt_addr(qhd->ep_number, dir); - hcd_event_xfer_complete(qhd->dev_addr, ep_addr, xferred_bytes, xfer_result, true); - } -} - -TU_ATTR_ALWAYS_INLINE static inline -void xfer_error_isr(uint8_t rhport) -{ - //------------- async list -------------// - ehci_qhd_t * const async_head = list_get_async_head(rhport); - ehci_qhd_t *p_qhd = async_head; - do - { - hcd_dcache_invalidate(p_qhd, sizeof(ehci_qhd_t)); - qhd_xfer_error_isr( p_qhd ); - p_qhd = qhd_next(p_qhd); - }while(p_qhd != async_head); // async list traversal, stop if loop around - - //------------- TODO refractor period list -------------// - uint32_t const period_1ms_addr = (uint32_t) list_get_period_head(rhport, 1u); - for (uint32_t interval_ms=1; interval_ms <= FRAMELIST_SIZE; interval_ms *= 2) - { - ehci_link_t next_item = *list_get_period_head(rhport, interval_ms); - - // TODO abstract max loop guard for period - while( !next_item.terminate && - !(interval_ms > 1 && period_1ms_addr == tu_align32(next_item.address)) ) - { - switch ( next_item.type ) - { - case EHCI_QTYPE_QHD: - { - ehci_qhd_t *p_qhd_int = (ehci_qhd_t *) tu_align32(next_item.address); - hcd_dcache_invalidate(p_qhd_int, sizeof(ehci_qhd_t)); - - qhd_xfer_error_isr(p_qhd_int); - } - break; - - // TODO support hs/fs ISO - case EHCI_QTYPE_ITD: - case EHCI_QTYPE_SITD: - case EHCI_QTYPE_FSTN: - default: break; - } - - next_item = *list_next(&next_item); - } - } -} - //------------- Host Controller Driver's Interrupt Handler -------------// void hcd_int_handler(uint8_t rhport) { @@ -768,21 +663,16 @@ void hcd_int_handler(uint8_t rhport) regs->status = EHCI_INT_MASK_PORT_CHANGE; // Acknowledge } - // A USB transfer is completed with error - if (int_status & EHCI_INT_MASK_ERROR) { - xfer_error_isr(rhport); - regs->status = EHCI_INT_MASK_ERROR; // Acknowledge - } + // A USB transfer is completed (OK or error) + uint32_t const usb_int = int_status & (EHCI_INT_MASK_USB | EHCI_INT_MASK_ERROR); + if (usb_int) { + proccess_async_xfer_isr(list_get_async_head(rhport)); - // A USB transfer is completed - if (int_status & EHCI_INT_MASK_USB) { for ( uint32_t i = 1; i <= FRAMELIST_SIZE; i *= 2 ) { - period_list_xfer_complete_isr(rhport, i); + process_period_xfer_isr(rhport, i); } - async_list_xfer_complete_isr(list_get_async_head(rhport)); - - regs->status = EHCI_INT_MASK_USB; // Acknowledge + regs->status = usb_int; // Acknowledge } //------------- There is some removed async previously -------------// @@ -1011,8 +901,7 @@ TU_ATTR_ALWAYS_INLINE static inline ehci_qtd_t *qtd_find_free(void) { return NULL; } -static void qtd_init(ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) -{ +static void qtd_init(ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) { tu_memclr(qtd, sizeof(ehci_qtd_t)); qtd->used = 1; @@ -1026,8 +915,7 @@ static void qtd_init(ehci_qtd_t* qtd, void const* buffer, uint16_t total_bytes) qtd->expected_bytes = total_bytes; qtd->buffer[0] = (uint32_t) buffer; - for(uint8_t i=1; i<5; i++) - { + for(uint8_t i=1; i<5; i++) { qtd->buffer[i] |= tu_align4k(qtd->buffer[i - 1] ) + 4096; } } -- cgit v1.3.1 From fbaa148fe0f4a4b83f41efe9887a8909161710f6 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 18 Jul 2023 15:22:09 +0700 Subject: updating hcd rusb2 - make osal_task_delay() as weak function in usbh - implement osal_task_delay() in hcd rusb2 (may moved to other places) --- examples/device/cdc_msc_freertos/skip.txt | 1 + examples/device/hid_composite_freertos/skip.txt | 1 + examples/dual/host_hid_to_device_cdc/only.txt | 1 + hw/bsp/ra/boards/ra6m5_ek/board.cmake | 7 +- hw/bsp/ra/family.cmake | 2 +- src/host/usbh.c | 2 +- src/portable/renesas/rusb2/dcd_rusb2.c | 12 ++- src/portable/renesas/rusb2/hcd_rusb2.c | 123 +++++++++++------------- src/portable/renesas/rusb2/rusb2_ra.h | 7 -- 9 files changed, 78 insertions(+), 78 deletions(-) (limited to 'src') diff --git a/examples/device/cdc_msc_freertos/skip.txt b/examples/device/cdc_msc_freertos/skip.txt index 49b8ee57b..a6f96b288 100644 --- a/examples/device/cdc_msc_freertos/skip.txt +++ b/examples/device/cdc_msc_freertos/skip.txt @@ -8,5 +8,6 @@ mcu:RP2040 mcu:SAMD11 mcu:SAMX7X mcu:VALENTYUSB_EPTRI +mcu:RAXXX family:broadcom_32bit family:broadcom_64bit diff --git a/examples/device/hid_composite_freertos/skip.txt b/examples/device/hid_composite_freertos/skip.txt index 49b8ee57b..a6f96b288 100644 --- a/examples/device/hid_composite_freertos/skip.txt +++ b/examples/device/hid_composite_freertos/skip.txt @@ -8,5 +8,6 @@ mcu:RP2040 mcu:SAMD11 mcu:SAMX7X mcu:VALENTYUSB_EPTRI +mcu:RAXXX family:broadcom_32bit family:broadcom_64bit diff --git a/examples/dual/host_hid_to_device_cdc/only.txt b/examples/dual/host_hid_to_device_cdc/only.txt index 6ee8e3fde..d9700677f 100644 --- a/examples/dual/host_hid_to_device_cdc/only.txt +++ b/examples/dual/host_hid_to_device_cdc/only.txt @@ -1,3 +1,4 @@ board:mimxrt1060_evk board:mimxrt1064_evk mcu:RP2040 +mcu:ra6m5 diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake index 5a615f9b0..c91d48a32 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -3,15 +3,20 @@ set(MCU_VARIANT ra6m5) set(JLINK_DEVICE R7FA6M5BH) -# default to PORT1 Highspeed +# Device port default to PORT1 Highspeed if (NOT DEFINED PORT) set(PORT 1) endif() +# Host port will be the other port +set(HOST_PORT $) + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC BOARD_TUD_RHPORT=${PORT} + BOARD_TUH_RHPORT=${HOST_PORT} # port 0 is fullspeed, port 1 is highspeed BOARD_TUD_MAX_SPEED=$ + BOARD_TUH_MAX_SPEED=$ ) endfunction() diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index f09e86a72..2c45b8d71 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -13,7 +13,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS RAXXX CACHE INTERNAL "") +set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "") #------------------------------------ # BOARD_TARGET diff --git a/src/host/usbh.c b/src/host/usbh.c index 184bda23b..1418cfb79 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -256,7 +256,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t #if CFG_TUSB_OS == OPT_OS_NONE // TODO rework time-related function later -void osal_task_delay(uint32_t msec) +TU_ATTR_WEAK void osal_task_delay(uint32_t msec) { const uint32_t start = hcd_frame_number(_usbh_controller); while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {} diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 358e5644b..6fee4edd7 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -27,12 +27,12 @@ #include "tusb_option.h" +#if CFG_TUD_ENABLED && defined(TUP_USBIP_RUSB2) + // Since TinyUSB doesn't use SOF for now, and this interrupt too often (1ms interval) // We disable SOF for now until needed later on #define USE_SOF 0 -#if CFG_TUD_ENABLED && defined(TUP_USBIP_RUSB2) - #include "device/dcd.h" #include "rusb2_type.h" @@ -53,6 +53,13 @@ #error "Unsupported MCU" #endif +//--------------------------------------------------------------------+ +// Application API for setting IRQ number +//--------------------------------------------------------------------+ +void tud_int_set_irqnum(uint8_t rhport, int32_t irqnum) { + rusb2_controller[rhport].irqnum = irqnum; +} + //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ @@ -681,7 +688,6 @@ static void enable_interrupt(uint32_t pswi) void dcd_init(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - rusb2_module_start(rhport, true); #ifdef RUSB2_SUPPORT_HIGHSPEED diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 4e5ff0359..656051e2b 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -27,8 +27,7 @@ #include "tusb_option.h" -#if CFG_TUH_ENABLED && (TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) || \ - TU_CHECK_MCU(OPT_MCU_RAXXX)) +#if CFG_TUH_ENABLED && defined(TUP_USBIP_RUSB2) #include "host/hcd.h" #include "rusb2_type.h" @@ -41,8 +40,14 @@ #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) #include "rusb2_rx.h" + #elif TU_CHECK_MCU(OPT_MCU_RAXXX) #include "rusb2_ra.h" + + void osal_task_delay(uint32_t msec) { + R_BSP_SoftwareDelay(msec, BSP_DELAY_UNITS_MILLISECONDS); + } + #else #error "Unsupported MCU" #endif @@ -67,19 +72,6 @@ TU_ATTR_PACKED_BEGIN TU_ATTR_BIT_FIELD_ORDER_BEGIN -typedef struct TU_ATTR_PACKED { - union { - struct { - uint16_t : 8; - uint16_t TRCLR: 1; - uint16_t TRENB: 1; - uint16_t : 0; - }; - uint16_t TRE; - }; - uint16_t TRN; -} reg_pipetre_t; - typedef union TU_ATTR_PACKED { struct { volatile uint16_t u8: 8; @@ -308,8 +300,9 @@ static bool pipe_xfer_out(unsigned num) pipe_write_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } - if (len < mps) + if (len < mps) { RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + } RUSB2->D0FIFOSEL = 0; while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ pipe->remaining = rem - len; @@ -488,60 +481,60 @@ static void enable_interrupt(uint32_t pswi) bool hcd_init(uint8_t rhport) { - (void)rhport; - -#if (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) - RUSB2->SYSCFG_b.HSE = 1; - RUSB2->PHYSET_b.HSEB = 0; - RUSB2->PHYSET_b.DIRPD = 0; - R_BSP_SoftwareDelay((uint32_t) 1, BSP_DELAY_UNITS_MILLISECONDS); - RUSB2->PHYSET_b.PLLRESET = 0; - RUSB2->LPSTS_b.SUSPENDM = 1; - while (!RUSB2->PLLSTA_b.PLLLOCK); - RUSB2->SYSCFG_b.DRPD = 1; - RUSB2->SYSCFG_b.DCFM = 1; - RUSB2->SYSCFG_b.DPRPU = 0; - RUSB2->SYSCFG_b.CNEN = 1; - RUSB2->BUSWAIT |= 0x0F00U; - RUSB2->SOFCFG_b.INTL = 1; - RUSB2->DVSTCTR0_b.VBUSEN = 1; - RUSB2->CFIFOSEL_b.MBW = 1; - RUSB2->D0FIFOSEL_b.MBW = 1; - RUSB2->D1FIFOSEL_b.MBW = 1; - RUSB2->INTSTS0 = 0; - for (volatile int i = 0; i < 30000; ++i) ; - RUSB2->SYSCFG_b.USBE = 1; -#else - /* HOST DEVICE Full SPEED */ - RUSB2->SYSCFG_b.SCKE = 1; /* USB Clock enable */ - while (!RUSB2->SYSCFG_b.SCKE) ; - RUSB2->SYSCFG_b.DPRPU = 0; /* D+ pull up enable - 0/disable in host mode */ - RUSB2->SYSCFG_b.DRPD = 1; /* D+/D- pull down - 1/in Host mode (pag.834)*/ - RUSB2->SYSCFG_b.DCFM = 1; /* HOST or Device - 1/HOST */ - - RUSB2->DVSTCTR0_b.VBUSEN = 1; - - RUSB2->SYSCFG_b.DRPD = 1; - for (volatile int i = 0; i < 30000; ++i) ; - RUSB2->SYSCFG_b.USBE = 1; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + rusb2_module_start(rhport, true); + +#ifdef RUSB2_SUPPORT_HIGHSPEED + if (rusb2_is_highspeed_rhport(rhport) ) { + rusb->SYSCFG_b.HSE = 1; + rusb->PHYSET_b.HSEB = 0; + rusb->PHYSET_b.DIRPD = 0; + R_BSP_SoftwareDelay((uint32_t) 1, BSP_DELAY_UNITS_MILLISECONDS); + rusb->PHYSET_b.PLLRESET = 0; + rusb->LPSTS_b.SUSPENDM = 1; + while ( !rusb->PLLSTA_b.PLLLOCK ); + rusb->SYSCFG_b.DRPD = 1; + rusb->SYSCFG_b.DCFM = 1; + rusb->SYSCFG_b.DPRPU = 0; + rusb->SYSCFG_b.CNEN = 1; + rusb->BUSWAIT |= 0x0F00U; + rusb->SOFCFG_b.INTL = 1; + rusb->DVSTCTR0_b.VBUSEN = 1; + rusb->CFIFOSEL_b.MBW = 1; + rusb->D0FIFOSEL_b.MBW = 1; + rusb->D1FIFOSEL_b.MBW = 1; + rusb->INTSTS0 = 0; + for ( volatile int i = 0; i < 30000; ++i ); + rusb->SYSCFG_b.USBE = 1; + } else #endif + { + rusb->SYSCFG_b.SCKE = 1; + while ( !rusb->SYSCFG_b.SCKE ) {} + rusb->SYSCFG_b.DCFM = 1; // Host function + rusb->SYSCFG_b.DPRPU = 0; // Disable D+ pull up + rusb->SYSCFG_b.DRPD = 1; // Enable D+/D- pull down - // MCU specific PHY init - rusb2_phy_init(); + rusb->DVSTCTR0_b.VBUSEN = 1; + for ( volatile int i = 0; i < 30000; ++i ) {} // FIXME do we need to wait here? how long ? + //R_BSP_SoftwareDelay(10, BSP_DELAY_UNITS_MILLISECONDS); + rusb->SYSCFG_b.USBE = 1; -#if (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST) - RUSB2->PHYSLEW = 0x5; - RUSB2->DPUSR0R_FS_b.FIXPHY0 = 0u; /* Transceiver Output fixed */ -#endif + // MCU specific PHY init + rusb2_phy_init(); + + rusb->PHYSLEW = 0x5; + rusb->DPUSR0R_FS_b.FIXPHY0 = 0u; /* Transceiver Output fixed */ + } /* Setup default control pipe */ - RUSB2->DCPCFG = RUSB2_PIPECFG_SHTNAK_Msk; - RUSB2->DCPMAXP = 64; - RUSB2->INTENB0 = RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk; - RUSB2->INTENB1 = RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk; - RUSB2->BEMPENB = 1; - RUSB2->NRDYENB = 1; - RUSB2->BRDYENB = 1; + rusb->DCPCFG = RUSB2_PIPECFG_SHTNAK_Msk; + rusb->DCPMAXP = 64; + rusb->INTENB0 = RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk; + rusb->INTENB1 = RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk; + rusb->BEMPENB = 1; + rusb->NRDYENB = 1; + rusb->BRDYENB = 1; return true; } diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 28b690512..8a4d2ad36 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -106,13 +106,6 @@ TU_ATTR_ALWAYS_INLINE static inline void rusb2_int_disable(uint8_t rhport) { TU_ATTR_ALWAYS_INLINE static inline void rusb2_phy_init(void) { } -//--------------------------------------------------------------------+ -// Application API for setting IRQ number -//--------------------------------------------------------------------+ -void tud_int_set_irqnum(uint8_t rhport, int32_t irqnum) { - rusb2_controller[rhport].irqnum = irqnum; -} - #ifdef __cplusplus } #endif -- cgit v1.3.1 From 6b6dcc6c099eeafaa6d76bf6133181874beabc0d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Jul 2023 19:50:50 +0700 Subject: refactored multiple ports for hcd rusb2 --- .idea/cmake.xml | 15 +- .idea/runConfigurations/ra6m5.xml | 2 +- hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug | 4 +- src/portable/renesas/rusb2/dcd_rusb2.c | 37 +-- src/portable/renesas/rusb2/hcd_rusb2.c | 452 ++++++++++++++------------- 5 files changed, 268 insertions(+), 242 deletions(-) (limited to 'src') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 864ff615b..519623b71 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -2,7 +2,6 @@ - @@ -26,27 +25,27 @@ - - - + + + - + + - - - + + \ No newline at end of file diff --git a/.idea/runConfigurations/ra6m5.xml b/.idea/runConfigurations/ra6m5.xml index 02df11610..89f9787a0 100644 --- a/.idea/runConfigurations/ra6m5.xml +++ b/.idea/runConfigurations/ra6m5.xml @@ -1,5 +1,5 @@ - + diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug index aebb29162..7b8ee9c95 100644 --- a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug +++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug @@ -20,7 +20,9 @@ void OnProjectLoad (void) { Project.SetTraceSource ("Trace Pins"); Project.SetTracePortWidth (4); - File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf"); + //File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf"); + //File.Open ("../../../../../../examples/dual/cmake-build-ra6m5/host_hid_to_device_cdc/host_hid_to_device_cdc.elf"); + File.Open ("../../../../../../examples/cmake-build-ra6m5/host/cdc_msc_hid/cdc_msc_hid.elf"); } /********************************************************************* * diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 6fee4edd7..83f0fdc4a 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -83,6 +83,18 @@ typedef struct TU_ATTR_PACKED TU_ATTR_PACKED_END // End of definition of packed structs (used by the CCRX toolchain) TU_ATTR_BIT_FIELD_ORDER_END +typedef struct +{ + pipe_state_t pipe[10]; + uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */ +} dcd_data_t; + +static dcd_data_t _dcd; + +//--------------------------------------------------------------------+ +// INTERNAL OBJECT & FUNCTION DECLARATION +//--------------------------------------------------------------------+ + // Transfer conditions specifiable for each pipe: // - Pipe 0: Control transfer with 64-byte single buffer // - Pipes 1 and 2: Bulk isochronous transfer continuous transfer mode with programmable buffer size up @@ -96,18 +108,6 @@ enum { PIPE_COUNT = 10, }; -typedef struct -{ - pipe_state_t pipe[10]; - uint8_t ep[2][16]; /* a lookup table for a pipe index from an endpoint address */ -} dcd_data_t; - -static dcd_data_t _dcd; - -//--------------------------------------------------------------------+ -// INTERNAL OBJECT & FUNCTION DECLARATION -//--------------------------------------------------------------------+ - static unsigned find_pipe(unsigned xfer) { switch (xfer) { @@ -746,20 +746,17 @@ void dcd_init(uint8_t rhport) } } -void dcd_int_enable(uint8_t rhport) -{ +void dcd_int_enable(uint8_t rhport) { rusb2_int_enable(rhport); } -void dcd_int_disable(uint8_t rhport) -{ +void dcd_int_disable(uint8_t rhport) { rusb2_int_disable(rhport); } -void dcd_set_address(uint8_t rhport, uint8_t dev_addr) -{ - (void)rhport; - (void)dev_addr; +void dcd_set_address(uint8_t rhport, uint8_t dev_addr) { + (void) rhport; + (void) dev_addr; } void dcd_remote_wakeup(uint8_t rhport) diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 656051e2b..a4b534a05 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -52,23 +52,12 @@ #error "Unsupported MCU" #endif -#define TU_RUSB2_HCD_DBG 0 +#define TU_RUSB2_HCD_DBG 2 //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ -/* LINK core registers */ -#if defined(__CCRX__) - #define RUSB2 ((RUSB2_REG_t __evenaccess*) RUSB2_REG_BASE) -#elif defined(__RX__) - #define RUSB2 ((RUSB2_REG_t*) RUSB2_REG_BASE) -#elif (CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST) - #define RUSB2 ((R_USB_HS0_Type*) R_USB_HS0_BASE) -#else - #define RUSB2 ((R_USB_FS0_Type*) R_USB_FS0_BASE) -#endif - TU_ATTR_PACKED_BEGIN TU_ATTR_BIT_FIELD_ORDER_BEGIN @@ -108,79 +97,97 @@ typedef struct //--------------------------------------------------------------------+ static hcd_data_t _hcd; -static unsigned find_pipe(unsigned xfer) -{ - switch (xfer) { - case TUSB_XFER_ISOCHRONOUS: - for (int i = 1; i <= 2; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_BULK: - for (int i = 3; i <= 5; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - for (int i = 1; i <= 2; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - break; - case TUSB_XFER_INTERRUPT: - for (int i = 6; i <= 9; ++i) { - if (0 == _hcd.pipe[i].ep) return i; - } - break; - default: - /* No support for control transfer */ - break; +// TODO merged with DCD +// Transfer conditions specifiable for each pipe: +// - Pipe 0: Control transfer with 64-byte single buffer +// - Pipes 1 and 2: Bulk isochronous transfer continuous transfer mode with programmable buffer size up +// to 2 KB and optional double buffer +// - Pipes 3 to 5: Bulk transfer continuous transfer mode with programmable buffer size up to 2 KB and +// optional double buffer +// - Pipes 6 to 9: Interrupt transfer with 64-byte single buffer +enum { + PIPE_1ST_BULK = 3, + PIPE_1ST_INTERRUPT = 6, + PIPE_COUNT = 10, +}; + +static unsigned find_pipe(unsigned xfer) { + switch ( xfer ) { + case TUSB_XFER_ISOCHRONOUS: + for (int i = 1; i < PIPE_1ST_BULK; ++i) { + if ( 0 == _hcd.pipe[i].ep ) return i; + } + break; + + case TUSB_XFER_BULK: + for (int i = PIPE_1ST_BULK; i < PIPE_1ST_INTERRUPT; ++i) { + if ( 0 == _hcd.pipe[i].ep ) return i; + } + for (int i = 1; i < PIPE_1ST_BULK; ++i) { + if ( 0 == _hcd.pipe[i].ep ) return i; + } + break; + + case TUSB_XFER_INTERRUPT: + for (int i = PIPE_1ST_INTERRUPT; i < PIPE_COUNT; ++i) { + if ( 0 == _hcd.pipe[i].ep ) return i; + } + break; + + default: + /* No support for control transfer */ + break; } return 0; } -static volatile uint16_t* get_pipectr(unsigned num) +static volatile uint16_t* get_pipectr(rusb2_reg_t *rusb, unsigned num) { if (num) { - return (volatile uint16_t*)&(RUSB2->PIPE_CTR[num - 1]); + return (volatile uint16_t*)&(rusb->PIPE_CTR[num - 1]); } else { - return (volatile uint16_t*)&(RUSB2->DCPCTR); + return (volatile uint16_t*)&(rusb->DCPCTR); } } -static volatile reg_pipetre_t* get_pipetre(unsigned num) +static volatile reg_pipetre_t* get_pipetre(rusb2_reg_t *rusb, unsigned num) { volatile reg_pipetre_t* tre = NULL; if ((1 <= num) && (num <= 5)) { - tre = (volatile reg_pipetre_t*)&(RUSB2->PIPE_TR[num - 1].E); + tre = (volatile reg_pipetre_t*)&(rusb->PIPE_TR[num - 1].E); } return tre; } -static volatile uint16_t* addr_to_pipectr(uint8_t dev_addr, unsigned ep_addr) +static volatile uint16_t* addr_to_pipectr(uint8_t rhport, uint8_t dev_addr, unsigned ep_addr) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); const unsigned epn = tu_edpt_number(ep_addr); + if (epn) { const unsigned dir_in = tu_edpt_dir(ep_addr); const unsigned num = _hcd.ep[dev_addr][dir_in][epn - 1]; - return get_pipectr(num); + return get_pipectr(rusb, num); } else { - return get_pipectr(0); + return get_pipectr(rusb, 0); } } -static unsigned edpt0_max_packet_size(void) +static uint16_t edpt0_max_packet_size(rusb2_reg_t* rusb) { - return RUSB2->DCPMAXP_b.MXPS; + return rusb->DCPMAXP_b.MXPS; } -static unsigned edpt_max_packet_size(unsigned num) +static uint16_t edpt_max_packet_size(rusb2_reg_t *rusb, unsigned num) { - RUSB2->PIPESEL = num; - return RUSB2->PIPEMAXP_b.MXPS; + rusb->PIPESEL = num; + return rusb->PIPEMAXP_b.MXPS; } -static inline void pipe_wait_for_ready(unsigned num) +static inline void pipe_wait_for_ready(rusb2_reg_t* rusb, unsigned num) { - while (RUSB2->D0FIFOSEL_b.CURPIPE != num) ; - while (!RUSB2->D0FIFOCTR_b.FRDY) ; + while (rusb->D0FIFOSEL_b.CURPIPE != num) ; + while (!rusb->D0FIFOCTR_b.FRDY) {} } static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) @@ -205,33 +212,33 @@ static void pipe_read_packet(void *buf, volatile void *fifo, unsigned len) while (len--) *p++ = *reg; } -static bool pipe0_xfer_in(void) +static bool pipe0_xfer_in(rusb2_reg_t* rusb) { pipe_state_t *pipe = &_hcd.pipe[0]; const unsigned rem = pipe->remaining; - const unsigned mps = edpt0_max_packet_size(); - const unsigned vld = RUSB2->CFIFOCTR_b.DTLN; + const unsigned mps = edpt0_max_packet_size(rusb); + const unsigned vld = rusb->CFIFOCTR_b.DTLN; const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { - RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; - pipe_read_packet(buf, (volatile void*)&RUSB2->CFIFO, len); + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; + pipe_read_packet(buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + rusb->CFIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { pipe->buf = NULL; return true; } - RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; return false; } -static bool pipe0_xfer_out(void) +static bool pipe0_xfer_out(rusb2_reg_t* rusb) { pipe_state_t *pipe = &_hcd.pipe[0]; const unsigned rem = pipe->remaining; @@ -239,40 +246,40 @@ static bool pipe0_xfer_out(void) pipe->buf = NULL; return true; } - const unsigned mps = edpt0_max_packet_size(); + const unsigned mps = edpt0_max_packet_size(rusb); const unsigned len = TU_MIN(mps, rem); void *buf = pipe->buf; if (len) { - pipe_write_packet(buf, (volatile void*)&RUSB2->CFIFO, len); + pipe_write_packet(buf, (volatile void*)&rusb->CFIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } pipe->remaining = rem - len; return false; } -static bool pipe_xfer_in(unsigned num) +static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) { pipe_state_t *pipe = &_hcd.pipe[num]; const unsigned rem = pipe->remaining; - RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); - const unsigned vld = RUSB2->D0FIFOCTR_b.DTLN; + rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_8BIT; + const unsigned mps = edpt_max_packet_size(rusb, num); + pipe_wait_for_ready(rusb, num); + const unsigned vld = rusb->D0FIFOCTR_b.DTLN; const unsigned len = TU_MIN(TU_MIN(rem, mps), vld); void *buf = pipe->buf; if (len) { - pipe_read_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); + pipe_read_packet(buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; } - RUSB2->D0FIFOSEL = 0; - while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + rusb->D0FIFOSEL = 0; + while (rusb->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ pipe->remaining = rem - len; if ((len < mps) || (rem == len)) { pipe->buf = NULL; @@ -281,7 +288,7 @@ static bool pipe_xfer_in(unsigned num) return false; } -static bool pipe_xfer_out(unsigned num) +static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) { pipe_state_t *pipe = &_hcd.pipe[num]; const unsigned rem = pipe->remaining; @@ -291,37 +298,39 @@ static bool pipe_xfer_out(unsigned num) return true; } - RUSB2->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - const unsigned mps = edpt_max_packet_size(num); - pipe_wait_for_ready(num); + rusb->D0FIFOSEL = num | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); + const unsigned mps = edpt_max_packet_size(rusb, num); + pipe_wait_for_ready(rusb, num); const unsigned len = TU_MIN(rem, mps); void *buf = pipe->buf; if (len) { - pipe_write_packet(buf, (volatile void*)&RUSB2->D0FIFO, len); + pipe_write_packet(buf, (volatile void*)&rusb->D0FIFO, len); pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } - RUSB2->D0FIFOSEL = 0; - while (RUSB2->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ + rusb->D0FIFOSEL = 0; + while (rusb->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ pipe->remaining = rem - len; return false; } -static bool process_pipe0_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) +static bool process_pipe0_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) { (void)dev_addr; + + rusb2_reg_t* rusb = RUSB2_REG(rhport); const unsigned dir_in = tu_edpt_dir(ep_addr); /* configure fifo direction and access unit settings */ if (dir_in) { /* IN, a byte */ - RUSB2->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; - while (RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ; + rusb->CFIFOSEL = RUSB2_FIFOSEL_MBW_8BIT; + while (rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE) ; } else { /* OUT, 2 bytes */ - RUSB2->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | + rusb->CFIFOSEL = RUSB2_CFIFOSEL_ISEL_WRITE | RUSB2_FIFOSEL_MBW_16BIT | (TU_BYTE_ORDER == TU_BIG_ENDIAN ? RUSB2_FIFOSEL_BIGEND : 0); - while (!(RUSB2->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) ; + while (!(rusb->CFIFOSEL & RUSB2_CFIFOSEL_ISEL_WRITE)) ; } pipe_state_t *pipe = &_hcd.pipe[0]; @@ -331,26 +340,28 @@ static bool process_pipe0_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, if (buflen) { pipe->buf = buffer; if (!dir_in) { /* OUT */ - TU_ASSERT(RUSB2->DCPCTR_b.BSTS && (RUSB2->USBREQ & 0x80)); - pipe0_xfer_out(); + TU_ASSERT(rusb->DCPCTR_b.BSTS && (rusb->USBREQ & 0x80)); + pipe0_xfer_out(rusb); } } else { /* ZLP */ pipe->buf = NULL; if (!dir_in) { /* OUT */ - RUSB2->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->CFIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; } - if (dir_in == RUSB2->DCPCFG_b.DIR) { - TU_ASSERT(RUSB2_PIPE_CTR_PID_NAK == RUSB2->DCPCTR_b.PID); - RUSB2->DCPCTR_b.SQSET = 1; - RUSB2->DCPCFG_b.DIR = dir_in ^ 1; + if (dir_in == rusb->DCPCFG_b.DIR) { + TU_ASSERT(RUSB2_PIPE_CTR_PID_NAK == rusb->DCPCTR_b.PID); + rusb->DCPCTR_b.SQSET = 1; + rusb->DCPCFG_b.DIR = dir_in ^ 1; } } - RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_BUF; return true; } -static bool process_pipe_xfer(uint8_t dev_addr, uint8_t ep_addr, void *buffer, uint16_t buflen) +static bool process_pipe_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, void *buffer, uint16_t buflen) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); + const unsigned epn = tu_edpt_number(ep_addr); const unsigned dir_in = tu_edpt_dir(ep_addr); const unsigned num = _hcd.ep[dev_addr - 1][dir_in][epn - 1]; @@ -363,19 +374,19 @@ static bool process_pipe_xfer(uint8_t dev_addr, uint8_t ep_addr, void *buffer, u pipe->remaining = buflen; if (!dir_in) { /* OUT */ if (buflen) { - pipe_xfer_out(num); + pipe_xfer_out(rusb, num); } else { /* ZLP */ - RUSB2->D0FIFOSEL = num; - pipe_wait_for_ready(num); - RUSB2->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; - RUSB2->D0FIFOSEL = 0; - while (RUSB2->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ + rusb->D0FIFOSEL = num; + pipe_wait_for_ready(rusb, num); + rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->D0FIFOSEL = 0; + while (rusb->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ } } else { - volatile uint16_t *ctr = get_pipectr(num); - volatile reg_pipetre_t *pt = get_pipetre(num); + volatile uint16_t *ctr = get_pipectr(rusb, num); + volatile reg_pipetre_t *pt = get_pipetre(rusb, num); if (pt) { - const unsigned mps = edpt_max_packet_size(num); + const unsigned mps = edpt_max_packet_size(rusb, num); if (*ctr & 0x3) *ctr = RUSB2_PIPE_CTR_PID_NAK; pt->TRE = TU_BIT(8); pt->TRN = (buflen + mps - 1) / mps; @@ -386,20 +397,20 @@ static bool process_pipe_xfer(uint8_t dev_addr, uint8_t ep_addr, void *buffer, u return true; } -static bool process_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) +static bool process_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, void* buffer, uint16_t buflen) { const unsigned epn = tu_edpt_number(ep_addr); if (0 == epn) { - return process_pipe0_xfer(dev_addr, ep_addr, buffer, buflen); + return process_pipe0_xfer(rhport, dev_addr, ep_addr, buffer, buflen); } else { - return process_pipe_xfer(dev_addr, ep_addr, buffer, buflen); + return process_pipe_xfer(rhport, dev_addr, ep_addr, buffer, buflen); } } static void process_pipe0_bemp(uint8_t rhport) { - (void)rhport; - bool completed = pipe0_xfer_out(); + rusb2_reg_t* rusb = RUSB2_REG(rhport); + bool completed = pipe0_xfer_out(rusb); if (completed) { pipe_state_t *pipe = &_hcd.pipe[0]; hcd_event_xfer_complete(pipe->dev, @@ -411,9 +422,9 @@ static void process_pipe0_bemp(uint8_t rhport) static void process_pipe_nrdy(uint8_t rhport, unsigned num) { - (void)rhport; + rusb2_reg_t* rusb = RUSB2_REG(rhport); xfer_result_t result; - uint16_t volatile *ctr = get_pipectr(num); + uint16_t volatile *ctr = get_pipectr(rusb, num); TU_LOG(TU_RUSB2_HCD_DBG, "NRDY %d %x\n", num, *ctr); switch (*ctr & RUSB2_PIPE_CTR_PID_Msk) { default: return; @@ -429,19 +440,19 @@ static void process_pipe_nrdy(uint8_t rhport, unsigned num) static void process_pipe_brdy(uint8_t rhport, unsigned num) { - (void)rhport; + rusb2_reg_t* rusb = RUSB2_REG(rhport); pipe_state_t *pipe = &_hcd.pipe[num]; const unsigned dir_in = tu_edpt_dir(pipe->ep); bool completed; if (dir_in) { /* IN */ if (num) { - completed = pipe_xfer_in(num); + completed = pipe_xfer_in(rusb, num); } else { - completed = pipe0_xfer_in(); + completed = pipe0_xfer_in(rusb); } } else { - completed = pipe_xfer_out(num); + completed = pipe_xfer_out(rusb, num); } if (completed) { hcd_event_xfer_complete(pipe->dev, pipe->ep, @@ -539,86 +550,88 @@ bool hcd_init(uint8_t rhport) return true; } -void hcd_int_enable(uint8_t rhport) -{ +void hcd_int_enable(uint8_t rhport) { rusb2_int_enable(rhport); } -void hcd_int_disable(uint8_t rhport) -{ +void hcd_int_disable(uint8_t rhport) { rusb2_int_disable(rhport); } uint32_t hcd_frame_number(uint8_t rhport) { - (void)rhport; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + /* The device must be reset at least once after connection * in order to start the frame counter. */ if (_hcd.need_reset) hcd_port_reset(rhport); - return RUSB2->FRMNUM_b.FRNM; + return rusb->FRMNUM_b.FRNM; } /*--------------------------------------------------------------------+ * Port API *--------------------------------------------------------------------+*/ -bool hcd_port_connect_status(uint8_t rhport) -{ - (void)rhport; - return RUSB2->INTSTS1_b.ATTCH ? true : false; +bool hcd_port_connect_status(uint8_t rhport) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); + return rusb->INTSTS1_b.ATTCH ? true : false; } -void hcd_port_reset(uint8_t rhport) -{ - RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; - while (RUSB2->DCPCTR_b.PBUSY) ; +void hcd_port_reset(uint8_t rhport) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; + while (rusb->DCPCTR_b.PBUSY) {} + hcd_int_disable(rhport); - RUSB2->DVSTCTR0_b.UACT = 0; - if (RUSB2->DCPCTR_b.SUREQ) { - RUSB2->DCPCTR_b.SUREQCLR = 1; + rusb->DVSTCTR0_b.UACT = 0; + if (rusb->DCPCTR_b.SUREQ) { + rusb->DCPCTR_b.SUREQCLR = 1; } hcd_int_enable(rhport); + /* Reset should be asserted 10-20ms. */ - RUSB2->DVSTCTR0_b.USBRST = 1; - for (volatile int i = 0; i < 2400000; ++i) ; - RUSB2->DVSTCTR0_b.USBRST = 0; - RUSB2->DVSTCTR0_b.UACT = 1; + rusb->DVSTCTR0_b.USBRST = 1; + for (volatile int i = 0; i < 2400000; ++i) {} + rusb->DVSTCTR0_b.USBRST = 0; + + rusb->DVSTCTR0_b.UACT = 1; _hcd.need_reset = false; } -void hcd_port_reset_end(uint8_t rhport) -{ +void hcd_port_reset_end(uint8_t rhport) { (void) rhport; } -tusb_speed_t hcd_port_speed_get(uint8_t rhport) -{ - (void)rhport; - switch (RUSB2->DVSTCTR0_b.RHST) { - default: return TUSB_SPEED_INVALID; +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); + switch (rusb->DVSTCTR0_b.RHST) { + case RUSB2_DVSTCTR0_RHST_HS: return TUSB_SPEED_HIGH; case RUSB2_DVSTCTR0_RHST_FS: return TUSB_SPEED_FULL; - case RUSB2_DVSTCTR0_RHST_LS: return TUSB_SPEED_LOW; + case RUSB2_DVSTCTR0_RHST_LS: return TUSB_SPEED_LOW; + default: return TUSB_SPEED_INVALID; } } -void hcd_device_close(uint8_t rhport, uint8_t dev_addr) -{ - (void)rhport; +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { + rusb2_reg_t* rusb = RUSB2_REG(rhport); uint16_t volatile *ctr; + TU_ASSERT(dev_addr < 6,); /* USBa can only handle addresses from 0 to 5. */ if (!dev_addr) return; + _hcd.ctl_mps[dev_addr] = 0; uint8_t *ep = &_hcd.ep[dev_addr - 1][0][0]; + for (int i = 0; i < 2 * 15; ++i, ++ep) { unsigned num = *ep; if (!num || (dev_addr != _hcd.pipe[num].dev)) continue; - ctr = (uint16_t volatile*)&RUSB2->PIPE_CTR[num - 1]; + ctr = (uint16_t volatile*)&rusb->PIPE_CTR[num - 1]; *ctr = 0; - RUSB2->NRDYENB &= ~TU_BIT(num); - RUSB2->BRDYENB &= ~TU_BIT(num); - RUSB2->PIPESEL = num; - RUSB2->PIPECFG = 0; - RUSB2->PIPEMAXP = 0; + rusb->NRDYENB &= ~TU_BIT(num); + rusb->BRDYENB &= ~TU_BIT(num); + rusb->PIPESEL = num; + rusb->PIPECFG = 0; + rusb->PIPEMAXP = 0; _hcd.pipe[num].ep = 0; _hcd.pipe[num].dev = 0; @@ -631,52 +644,54 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr) *--------------------------------------------------------------------+*/ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { - (void)rhport; - TU_LOG(TU_RUSB2_HCD_DBG, "S %d %x\n", dev_addr, RUSB2->DCPCTR); - TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ - TU_ASSERT(0 == RUSB2->DCPCTR_b.SUREQ); - RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; + rusb2_reg_t* rusb = RUSB2_REG(rhport); + TU_LOG(TU_RUSB2_HCD_DBG, "S %d %x\n", dev_addr, rusb->DCPCTR); + + TU_ASSERT(0 == rusb->DCPCTR_b.SUREQ); + + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; _hcd.pipe[0].buf = NULL; _hcd.pipe[0].length = 8; _hcd.pipe[0].remaining = 0; _hcd.pipe[0].dev = dev_addr; - while (RUSB2->DCPCTR_b.PBUSY) ; - RUSB2->DCPMAXP = (dev_addr << 12) | _hcd.ctl_mps[dev_addr]; + while (rusb->DCPCTR_b.PBUSY) ; + rusb->DCPMAXP = (dev_addr << 12) | _hcd.ctl_mps[dev_addr]; /* Set direction in advance for DATA stage */ uint8_t const bmRequesttype = setup_packet[0]; - RUSB2->DCPCFG_b.DIR = tu_edpt_dir(bmRequesttype) ? 0: 1; + rusb->DCPCFG_b.DIR = tu_edpt_dir(bmRequesttype) ? 0: 1; uint16_t const* p = (uint16_t const*)(uintptr_t)&setup_packet[0]; - RUSB2->USBREQ = tu_htole16(p[0]); - RUSB2->USBVAL = p[1]; - RUSB2->USBINDX = p[2]; - RUSB2->USBLENG = p[3]; + rusb->USBREQ = tu_htole16(p[0]); + rusb->USBVAL = p[1]; + rusb->USBINDX = p[2]; + rusb->USBLENG = p[3]; - RUSB2->DCPCTR_b.SUREQ = 1; + rusb->DCPCTR_b.SUREQ = 1; return true; } bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const *ep_desc) { - (void)rhport; TU_ASSERT(dev_addr < 6); /* USBa can only handle addresses from 0 to 5. */ + rusb2_reg_t* rusb = RUSB2_REG(rhport); const unsigned ep_addr = ep_desc->bEndpointAddress; const unsigned epn = tu_edpt_number(ep_addr); const unsigned mps = tu_edpt_packet_size(ep_desc); + if (0 == epn) { - RUSB2->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; + rusb->DCPCTR = RUSB2_PIPE_CTR_PID_NAK; hcd_devtree_info_t devtree; hcd_devtree_get_info(dev_addr, &devtree); - uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t) &RUSB2->DEVADD[0]; + uint16_t volatile *devadd = (uint16_t volatile *)(uintptr_t) &rusb->DEVADD[0]; devadd += dev_addr; - while (RUSB2->DCPCTR_b.PBUSY) ; - RUSB2->DCPMAXP = (dev_addr << 12) | mps; + while (rusb->DCPCTR_b.PBUSY) {} + rusb->DCPMAXP = (dev_addr << 12) | mps; *devadd = (TUSB_SPEED_FULL == devtree.speed) ? RUSB2_DEVADD_USBSPD_FS : RUSB2_DEVADD_USBSPD_LS; _hcd.ctl_mps[dev_addr] = mps; return true; @@ -690,17 +705,20 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const } const unsigned num = find_pipe(xfer); if (!num) return false; + _hcd.pipe[num].dev = dev_addr; _hcd.pipe[num].ep = ep_addr; _hcd.ep[dev_addr - 1][dir_in][epn - 1] = num; /* setup pipe */ hcd_int_disable(rhport); - RUSB2->PIPESEL = num; - RUSB2->PIPEMAXP = (dev_addr << 12) | mps; - volatile uint16_t *ctr = get_pipectr(num); + + rusb->PIPESEL = num; + rusb->PIPEMAXP = (dev_addr << 12) | mps; + volatile uint16_t *ctr = get_pipectr(rusb, num); *ctr = RUSB2_PIPE_CTR_ACLRM_Msk | RUSB2_PIPE_CTR_SQCLR_Msk; *ctr = 0; + unsigned cfg = ((1 ^ dir_in) << 4) | epn; if (xfer == TUSB_XFER_BULK) { cfg |= RUSB2_PIPECFG_TYPE_BULK | RUSB2_PIPECFG_SHTNAK_Msk | RUSB2_PIPECFG_DBLB_Msk; @@ -709,13 +727,16 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const } else { cfg |= RUSB2_PIPECFG_TYPE_ISO | RUSB2_PIPECFG_DBLB_Msk; } - RUSB2->PIPECFG = cfg; - RUSB2->BRDYSTS = 0x1FFu ^ TU_BIT(num); - RUSB2->NRDYENB |= TU_BIT(num); - RUSB2->BRDYENB |= TU_BIT(num); + + rusb->PIPECFG = cfg; + rusb->BRDYSTS = 0x1FFu ^ TU_BIT(num); + rusb->NRDYENB |= TU_BIT(num); + rusb->BRDYENB |= TU_BIT(num); + if (!dir_in) { *ctr = RUSB2_PIPE_CTR_PID_BUF; } + hcd_int_enable(rhport); return true; @@ -726,14 +747,15 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *b bool r; hcd_int_disable(rhport); TU_LOG(TU_RUSB2_HCD_DBG, "X %d %x %u\n", dev_addr, ep_addr, buflen); - r = process_edpt_xfer(dev_addr, ep_addr, buffer, buflen); + r = process_edpt_xfer(rhport, dev_addr, ep_addr, buffer, buflen); hcd_int_enable(rhport); return r; } bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) { - uint16_t volatile *ctr = addr_to_pipectr(dev_addr, ep_addr); + uint8_t rhport = 0; // FIXME change API + uint16_t volatile *ctr = addr_to_pipectr(rhport, dev_addr, ep_addr); TU_ASSERT(ctr); const uint32_t pid = *ctr & 0x3; @@ -756,67 +778,73 @@ bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) //--------------------------------------------------------------------+ void hcd_int_handler(uint8_t rhport) { - (void)rhport; -#if defined(__CCRX__) - static const int Mod37BitPosition[] = { - -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, - 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, - 20, 8, 19, 18}; -#endif + rusb2_reg_t* rusb = RUSB2_REG(rhport); static unsigned char attach_attempt = 0; - unsigned is1 = RUSB2->INTSTS1; - unsigned is0 = RUSB2->INTSTS0; + unsigned is0 = rusb->INTSTS0; + unsigned is1 = rusb->INTSTS1; /* clear active bits except VALID (don't write 0 to already cleared bits according to the HW manual) */ - RUSB2->INTSTS1 = ~((RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk) & is1); - RUSB2->INTSTS0 = ~((RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk) & is0); - TU_LOG(TU_RUSB2_HCD_DBG, "IS %04x %04x\n", is0, is1); - is1 &= RUSB2->INTENB1; - is0 &= RUSB2->INTENB0; + rusb->INTSTS1 = ~((RUSB2_INTSTS1_SACK_Msk | RUSB2_INTSTS1_SIGN_Msk | RUSB2_INTSTS1_ATTCH_Msk | RUSB2_INTSTS1_DTCH_Msk) & is1); + rusb->INTSTS0 = ~((RUSB2_INTSTS0_BRDY_Msk | RUSB2_INTSTS0_NRDY_Msk | RUSB2_INTSTS0_BEMP_Msk) & is0); + + TU_LOG3("IS %04x %04x\n", is0, is1); + is1 &= rusb->INTENB1; + is0 &= rusb->INTENB0; if (is1 & RUSB2_INTSTS1_SACK_Msk) { /* Set DATA1 in advance for the next transfer. */ - RUSB2->DCPCTR_b.SQSET = 1; + rusb->DCPCTR_b.SQSET = 1; attach_attempt = 0; - hcd_event_xfer_complete(RUSB2->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_SUCCESS, true); + hcd_event_xfer_complete(rusb->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_SUCCESS, true); } + if (is1 & RUSB2_INTSTS1_SIGN_Msk) { - hcd_event_xfer_complete(RUSB2->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_FAILED, true); + hcd_event_xfer_complete(rusb->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_FAILED, true); if(attach_attempt > 0) { - RUSB2->DVSTCTR0_b.UACT = 1; + rusb->DVSTCTR0_b.UACT = 1; _hcd.need_reset = true; - RUSB2->INTENB1 = (RUSB2->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; + rusb->INTENB1 = (rusb->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; hcd_event_device_attach(rhport, true); } attach_attempt--; } + if (is1 & RUSB2_INTSTS1_ATTCH_Msk) { attach_attempt = 10; - RUSB2->DVSTCTR0_b.UACT = 1; + rusb->DVSTCTR0_b.UACT = 1; _hcd.need_reset = true; - RUSB2->INTENB1 = (RUSB2->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; + rusb->INTENB1 = (rusb->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; hcd_event_device_attach(rhport, true); } + if (is1 & RUSB2_INTSTS1_DTCH_Msk) { - RUSB2->DVSTCTR0_b.UACT = 0; - if (RUSB2->DCPCTR_b.SUREQ) { - RUSB2->DCPCTR_b.SUREQCLR = 1; + rusb->DVSTCTR0_b.UACT = 0; + if (rusb->DCPCTR_b.SUREQ) { + rusb->DCPCTR_b.SUREQCLR = 1; } - RUSB2->INTENB1 = (RUSB2->INTENB1 & ~RUSB2_INTSTS1_DTCH_Msk) | RUSB2_INTSTS1_ATTCH_Msk; + rusb->INTENB1 = (rusb->INTENB1 & ~RUSB2_INTSTS1_DTCH_Msk) | RUSB2_INTSTS1_ATTCH_Msk; hcd_event_device_remove(rhport, true); } if (is0 & RUSB2_INTSTS0_BEMP_Msk) { - const unsigned s = RUSB2->BEMPSTS; - RUSB2->BEMPSTS = 0; + const unsigned s = rusb->BEMPSTS; + rusb->BEMPSTS = 0; if (s & 1) { process_pipe0_bemp(rhport); } } + +#if defined(__CCRX__) + static const int Mod37BitPosition[] = { + -1, 0, 1, 26, 2, 23, 27, 0, 3, 16, 24, 30, 28, 11, 0, 13, 4, + 7, 17, 0, 25, 22, 31, 15, 29, 10, 12, 6, 0, 21, 14, 9, 5, + 20, 8, 19, 18}; +#endif + if (is0 & RUSB2_INTSTS0_NRDY_Msk) { - const unsigned m = RUSB2->NRDYENB; - unsigned s = RUSB2->NRDYSTS & m; - RUSB2->NRDYSTS = ~s; + const unsigned m = rusb->NRDYENB; + unsigned s = rusb->NRDYSTS & m; + rusb->NRDYSTS = ~s; while (s) { #if defined(__CCRX__) const unsigned num = Mod37BitPosition[(-s & s) % 37]; @@ -828,10 +856,10 @@ void hcd_int_handler(uint8_t rhport) } } if (is0 & RUSB2_INTSTS0_BRDY_Msk) { - const unsigned m = RUSB2->BRDYENB; - unsigned s = RUSB2->BRDYSTS & m; + const unsigned m = rusb->BRDYENB; + unsigned s = rusb->BRDYSTS & m; /* clear active bits (don't write 0 to already cleared bits according to the HW manual) */ - RUSB2->BRDYSTS = ~s; + rusb->BRDYSTS = ~s; while (s) { #if defined(__CCRX__) const unsigned num = Mod37BitPosition[(-s & s) % 37]; -- cgit v1.3.1 From c37a9571741cef0dcf0cd5a77e202ae741a2dd42 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Jul 2023 19:56:48 +0700 Subject: correct hcd_edpt_clear_stall() API signature --- src/host/hcd.h | 2 +- src/portable/mentor/musb/hcd_musb.c | 4 ++-- src/portable/nxp/khci/hcd_khci.c | 4 ++-- src/portable/ohci/ohci.c | 4 ++-- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 4 ++-- src/portable/raspberrypi/rp2040/hcd_rp2040.c | 4 ++-- src/portable/renesas/rusb2/hcd_rusb2.c | 4 ++-- 7 files changed, 13 insertions(+), 13 deletions(-) (limited to 'src') diff --git a/src/host/hcd.h b/src/host/hcd.h index 50f1dcdcc..898e0c6a4 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -179,7 +179,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr); +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); //--------------------------------------------------------------------+ // USBH implemented API diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 5be67a186..5d1fba6d9 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -831,8 +831,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { } // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; unsigned const pipenum = find_pipe(dev_addr, ep_addr); if (!pipenum) return false; hw_endpoint_t volatile *regs = edpt_regs(pipenum - 1); diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 6784049c5..928564e26 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -570,8 +570,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return false; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; if (!tu_edpt_number(ep_addr)) return true; int num = find_pipe(dev_addr, ep_addr); if (num < 0) return false; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 9f3af4781..413e72037 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -556,8 +556,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return false; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; ohci_ed_t * const p_ed = ed_from_addr(dev_addr, ep_addr); p_ed->is_stalled = 0; diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index bb41ad638..45a3e80ef 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -163,8 +163,8 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet // return busy; //} -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; (void) dev_addr; (void) ep_addr; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 5091fa907..6db8e2a0a 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -625,8 +625,8 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet return true; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; (void) dev_addr; (void) ep_addr; diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 0a75d0b47..292d40da8 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -718,8 +718,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return false; } -bool hcd_edpt_clear_stall(uint8_t dev_addr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; uint16_t volatile *ctr = addr_to_pipectr(dev_addr, ep_addr); TU_ASSERT(ctr); -- cgit v1.3.1 From 10575c1b380136ce9381393c33e982cea7ef4731 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Jul 2023 20:48:18 +0700 Subject: mising ehci --- src/host/hcd.h | 2 +- src/portable/ehci/ehci.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'src') diff --git a/src/host/hcd.h b/src/host/hcd.h index 898e0c6a4..d77dd6e2f 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -179,7 +179,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 -bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr); +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); //--------------------------------------------------------------------+ // USBH implemented API diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 241393a39..979069cfa 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -502,8 +502,8 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return still_active; // true if removed an active transfer } -bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) -{ +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t daddr, uint8_t ep_addr) { + (void) rhport; ehci_qhd_t *qhd = qhd_get_from_addr(daddr, ep_addr); qhd->qtd_overlay.halted = 0; hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); -- cgit v1.3.1 From 5a29db2787fea0ff9fe236d2631b2dcbc94aea50 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 27 Jul 2023 15:52:55 +0700 Subject: add check for edpt_xfer() with halted, also reset data toggle when clear stall --- src/portable/ehci/ehci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index b84de5191..02b843667 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -443,6 +443,11 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * ehci_qtd_t* qtd; if (epnum == 0) { + // Control endpoint never be stalled. Skip reset Data Toggle since it is fixed per stage + if (qhd->qtd_overlay.halted) { + qhd->qtd_overlay.halted = false; + } + qtd = qtd_control(dev_addr); qtd_init(qtd, buffer, buflen); @@ -450,6 +455,9 @@ bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * qtd->data_toggle = 1; qtd->pid = dir ? EHCI_PID_IN : EHCI_PID_OUT; } else { + // skip if endpoint is halted + TU_VERIFY(!qhd->qtd_overlay.halted); + qtd = qtd_find_free(); TU_ASSERT(qtd); @@ -506,8 +514,9 @@ bool hcd_edpt_clear_stall(uint8_t daddr, uint8_t ep_addr) { ehci_qhd_t *qhd = qhd_get_from_addr(daddr, ep_addr); qhd->qtd_overlay.halted = 0; + qhd->qtd_overlay.data_toggle = 0; hcd_dcache_clean_invalidate(qhd, sizeof(ehci_qhd_t)); - // TODO reset data toggle ? + return true; } @@ -881,8 +890,10 @@ static void qhd_remove_qtd(ehci_qhd_t *qhd) { qhd->attached_qtd = NULL; qhd->attached_buffer = 0; + hcd_dcache_clean(qhd, sizeof(ehci_qhd_t)); qtd->used = 0; // free QTD + hcd_dcache_clean(qtd, sizeof(ehci_qtd_t)); } //--------------------------------------------------------------------+ -- cgit v1.3.1 From 6021803d584a95efac5bc10f89ed970b2c1fa60e Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 28 Jul 2023 11:33:26 +0700 Subject: fix ci --- src/portable/renesas/rusb2/dcd_rusb2.c | 13 ++++++------- src/portable/renesas/rusb2/rusb2_ra.h | 9 ++++++--- 2 files changed, 12 insertions(+), 10 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 83f0fdc4a..0380f36b9 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -49,17 +49,16 @@ #define D0FIFOCTR CFIFOCTR #define D0FIFOCTR_b CFIFOCTR_b #endif + + // Application API for setting IRQ number + void tud_int_set_irqnum(uint8_t rhport, int32_t irqnum) { + rusb2_controller[rhport].irqnum = irqnum; + } + #else #error "Unsupported MCU" #endif -//--------------------------------------------------------------------+ -// Application API for setting IRQ number -//--------------------------------------------------------------------+ -void tud_int_set_irqnum(uint8_t rhport, int32_t irqnum) { - rusb2_controller[rhport].irqnum = irqnum; -} - //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 8a4d2ad36..7ff272bbc 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -64,8 +64,14 @@ typedef struct { #if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) #define RUSB2_SUPPORT_HIGHSPEED #define RUSB2_CONTROLLER_COUNT 2 + + #define rusb2_is_highspeed_rhport(_p) (_p == 1) + #define rusb2_is_highspeed_reg(_reg) (_reg == RUSB2_REG(1)) #else #define RUSB2_CONTROLLER_COUNT 1 + + #define rusb2_is_highspeed_rhport(_p) (false) + #define rusb2_is_highspeed_reg(_reg) (false) #endif // USBFS_INT_IRQn and USBHS_USB_INT_RESUME_IRQn are generated by FSP @@ -78,9 +84,6 @@ static rusb2_controller_t rusb2_controller[] = { #define RUSB2_REG(_p) ((rusb2_reg_t*) rusb2_controller[_p].reg_base) -#define rusb2_is_highspeed_rhport(_p) (_p == 1) -#define rusb2_is_highspeed_reg(_reg) (_reg == RUSB2_REG(1)) - //--------------------------------------------------------------------+ // RUSB2 API //--------------------------------------------------------------------+ -- cgit v1.3.1 From e56d5443a8a87e932b22bc6315f30cd537fe0edf Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 28 Jul 2023 12:42:40 +0700 Subject: - revert usb address - more clean up --- src/portable/renesas/rusb2/dcd_rusb2.c | 6 +++--- src/portable/renesas/rusb2/hcd_rusb2.c | 14 ++++---------- 2 files changed, 7 insertions(+), 13 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 0380f36b9..9383923bd 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -51,7 +51,7 @@ #endif // Application API for setting IRQ number - void tud_int_set_irqnum(uint8_t rhport, int32_t irqnum) { + void tud_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum) { rusb2_controller[rhport].irqnum = irqnum; } @@ -638,7 +638,7 @@ static void process_bus_reset(uint8_t rhport) static void process_set_address(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - const uint32_t addr = rusb->USBADDR & 0xFF; + const uint16_t addr = rusb->USBADDR_b.USBADDR; if (!addr) return; const tusb_control_request_t setup_packet = { @@ -821,7 +821,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc) if ( rusb2_is_highspeed_rhport(rhport) ) { // FIXME shouldn't be after pipe selection and config, also the BUFNMB should be changed - // depending on the allocation scheme + // depending on the allocation scheme rusb->PIPEBUF = 0x7C08; } diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index fef8bdf19..c5ed8ae55 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -32,21 +32,15 @@ #include "host/hcd.h" #include "rusb2_type.h" -#if !defined(CFG_TUSB_RHPORT0_MODE) && !defined(CFG_TUSB_RHPORT1_MODE) -// fallback -#define CFG_TUSB_RHPORT0_MODE OPT_MODE_HOST -#define CFG_TUSB_RHPORT1_MODE 0 -#endif - #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) #include "rusb2_rx.h" #elif TU_CHECK_MCU(OPT_MCU_RAXXX) #include "rusb2_ra.h" - void osal_task_delay(uint32_t msec) { - R_BSP_SoftwareDelay(msec, BSP_DELAY_UNITS_MILLISECONDS); - } +// void osal_task_delay(uint32_t msec) { +// R_BSP_SoftwareDelay(msec, BSP_DELAY_UNITS_MILLISECONDS); +// } #else #error "Unsupported MCU" @@ -785,7 +779,7 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { void hcd_int_handler(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - static unsigned char attach_attempt = 0; + static unsigned char attach_attempt = 0; // TODO remove later unsigned is0 = rusb->INTSTS0; unsigned is1 = rusb->INTSTS1; -- cgit v1.3.1 From feb58ebd54e68bc3b7f21b0d168417053c525f0a Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 28 Jul 2023 19:01:12 +0700 Subject: add uno r4 wih FLASH_IMAGE_START=0x4000, running but interrupt (systick) does not seems to work --- .idea/runConfigurations/ra4m1.xml | 2 +- .idea/runConfigurations/ra6m1.xml | 2 +- .idea/runConfigurations/ra6m5.xml | 2 +- .../ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 18 ++--- hw/bsp/ra/boards/uno_r4/board.cmake | 11 +++ hw/bsp/ra/boards/uno_r4/board.h | 53 +++++++++++++ hw/bsp/ra/boards/uno_r4/board.mk | 9 +++ hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h | 35 +++++++++ .../boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h | 5 ++ .../uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h | 11 +++ .../boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h | 87 ++++++++++++++++++++++ hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h | 21 ++++++ hw/bsp/ra/boards/uno_r4/uno_r4.ld | 25 +++++++ hw/bsp/ra/family.mk | 3 +- src/portable/renesas/rusb2/hcd_rusb2.c | 1 + 15 files changed, 272 insertions(+), 13 deletions(-) create mode 100644 hw/bsp/ra/boards/uno_r4/board.cmake create mode 100644 hw/bsp/ra/boards/uno_r4/board.h create mode 100644 hw/bsp/ra/boards/uno_r4/board.mk create mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h create mode 100644 hw/bsp/ra/boards/uno_r4/uno_r4.ld (limited to 'src') diff --git a/.idea/runConfigurations/ra4m1.xml b/.idea/runConfigurations/ra4m1.xml index 22bb61949..149a157c4 100644 --- a/.idea/runConfigurations/ra4m1.xml +++ b/.idea/runConfigurations/ra4m1.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra6m1.xml b/.idea/runConfigurations/ra6m1.xml index 438ac4063..57af9abd9 100644 --- a/.idea/runConfigurations/ra6m1.xml +++ b/.idea/runConfigurations/ra6m1.xml @@ -1,5 +1,5 @@ - + diff --git a/.idea/runConfigurations/ra6m5.xml b/.idea/runConfigurations/ra6m5.xml index 89f9787a0..1a6358304 100644 --- a/.idea/runConfigurations/ra6m5.xml +++ b/.idea/runConfigurations/ra6m5.xml @@ -1,5 +1,5 @@ - + diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h index 3bde2db0d..72cdb89e6 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -12,16 +12,16 @@ #define BSP_MOCO_HZ (8000000) #define BSP_SUB_CLOCK_HZ (32768) #if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (24000000) + #define BSP_HOCO_HZ (24000000) #elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) - #elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) - #elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) - #else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" - #endif + #define BSP_HOCO_HZ (32000000) +#elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) +#elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake new file mode 100644 index 000000000..34780d776 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/board.cmake @@ -0,0 +1,11 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra4m1) + +set(JLINK_DEVICE R7FA4M1AB) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC) +# target_sources(${TARGET} PRIVATE) +# target_include_directories(${BOARD_TARGET} PUBLIC) +endfunction() diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h new file mode 100644 index 000000000..72abda27f --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_01_PIN_11 // D13 +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_01_PIN_10 // D12 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, + {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, + // USB FS D+, D-, VBus + {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk new file mode 100644 index 000000000..cbe6c782c --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/board.mk @@ -0,0 +1,9 @@ +CPU_CORE = cortex-m4 +MCU_VARIANT = ra4m1 + +LD_FILE = $(BOARD_PATH)/${BOARD}.ld + +# For flash-jlink target +JLINK_DEVICE = R7FA4M1AB + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..c1d1022cc --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,35 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#undef RA_NOT_DEFINED +#define BSP_CFG_RTOS (0) +#if defined(_RA_BOOT_IMAGE) +#define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x800) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) + +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 + +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..444d32e56 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (4) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..336918800 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M1AB3CNE +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_QFN +#define BSP_PACKAGE_PINS (48) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..fc604eb3b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,87 @@ +/* generated configuration header file through renesas e2 studio */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA4M1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) +#elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) +#elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) +#define BSP_MCU_VBATT_SUPPORT (1) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..63618ec4b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,21 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */ +#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/uno_r4.ld b/hw/bsp/ra/boards/uno_r4/uno_r4.ld new file mode 100644 index 000000000..45f11dfb1 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/uno_r4.ld @@ -0,0 +1,25 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x8000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x40000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x01010018; +ID_CODE_LENGTH = 0x20; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x0; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +/* Uno R4 has bootloader */ +FLASH_IMAGE_START = 0x4000; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index f5097460a..a5325306d 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -59,9 +59,10 @@ INC += \ ifndef LD_FILE LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld -LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc endif +LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc + # For freeRTOS port source # hack to use the port provided by renesas FREERTOS_PORTABLE_SRC = $(FSP_RA)/src/rm_freertos_port diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index c5ed8ae55..7f49dc8a9 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -186,6 +186,7 @@ static inline void pipe_wait_for_ready(rusb2_reg_t* rusb, unsigned num) static void pipe_write_packet(void *buf, volatile void *fifo, unsigned len) { + // NOTE: unlike DCD, Highspeed 32-bit FIFO does not need to adjust the fifo address volatile hw_fifo_t *reg = (volatile hw_fifo_t*)fifo; uintptr_t addr = (uintptr_t)buf; while (len >= 2) { -- cgit v1.3.1 From 0d9973ef87a55276d14c2aa45647f92a8358e9a2 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 31 Jul 2023 16:21:19 +0700 Subject: enable_irq since uno bootloader can disable it. systick triggered, however usb still not work with uno --- hw/bsp/ra/family.c | 4 ++++ src/portable/renesas/rusb2/dcd_rusb2.c | 1 + 2 files changed, 5 insertions(+) (limited to 'src') diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index b78fdedc7..096f0d0ff 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -92,6 +92,10 @@ const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENT //--------------------------------------------------------------------+ void board_init(void) { + // Enable global interrupts in CPSR register since board with bootloader such as Arduino Uno R4 + // can transfer CPU control with CPSR.I bit set to 0 (disable IRQ) + __enable_irq(); + /* Configure pins. */ R_IOPORT_Open(&port_ctrl, &family_pin_cfg); diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 9383923bd..37fd93497 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -740,6 +740,7 @@ void dcd_init(uint8_t rhport) rusb->BEMPENB = 1; rusb->BRDYENB = 1; + // If VBUS (detect) pin is not used, application need to call tud_connect() manually after tud_init() if (rusb->INTSTS0_b.VBSTS) { dcd_connect(rhport); } -- cgit v1.3.1 From cb47231518d8a33bb9c5ab710c819049274d443b Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 31 Jul 2023 17:13:21 +0700 Subject: revert out of scope changes --- src/host/usbh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'src') diff --git a/src/host/usbh.c b/src/host/usbh.c index c8eb91be3..15c48be47 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -258,7 +258,7 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t #if CFG_TUSB_OS == OPT_OS_NONE // TODO rework time-related function later -TU_ATTR_WEAK void osal_task_delay(uint32_t msec) +void osal_task_delay(uint32_t msec) { const uint32_t start = hcd_frame_number(_usbh_controller); while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {} -- cgit v1.3.1 From 3f788a4e5a7758ce51cbcadef4ac21e427cc3c56 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 31 Jul 2023 19:09:40 +0700 Subject: enable USBMC for uno r4, add board_init_after_tusb() API add BOARD_UPPERCASE for board detection --- examples/device/audio_4_channel_mic/src/main.c | 4 ++++ examples/device/audio_test/src/main.c | 4 ++++ examples/device/audio_test_multi_rate/src/main.c | 4 ++++ examples/device/cdc_dual_ports/src/main.c | 4 ++++ examples/device/cdc_msc/src/main.c | 4 ++++ examples/device/cdc_msc_freertos/src/main.c | 4 ++++ examples/device/dfu/src/main.c | 4 ++++ examples/device/dfu_runtime/src/main.c | 4 ++++ examples/device/dynamic_configuration/src/main.c | 4 ++++ examples/device/hid_boot_interface/src/main.c | 4 ++++ examples/device/hid_composite/src/main.c | 4 ++++ examples/device/hid_composite_freertos/src/main.c | 4 ++++ examples/device/hid_generic_inout/src/main.c | 4 ++++ examples/device/hid_multiple_interface/src/main.c | 4 ++++ examples/device/midi_test/src/main.c | 4 ++++ examples/device/msc_dual_lun/src/main.c | 4 ++++ examples/device/net_lwip_webserver/src/main.c | 4 ++++ examples/device/uac2_headset/src/main.c | 4 ++++ examples/device/usbtmc/src/main.c | 4 ++++ examples/device/video_capture/src/main.c | 4 ++++ examples/device/webusb_serial/src/main.c | 4 ++++ examples/dual/host_hid_to_device_cdc/src/main.c | 4 ++++ examples/host/bare_api/src/main.c | 4 ++++ examples/host/cdc_msc_hid/src/main.c | 4 ++++ examples/host/hid_controller/src/main.c | 4 ++++ examples/host/msc_file_explorer/src/main.c | 5 +++++ examples/make.mk | 2 ++ hw/bsp/board.h | 3 +++ hw/bsp/family_support.cmake | 5 +++++ hw/bsp/ra/boards/uno_r4/board.mk | 2 +- hw/bsp/ra/family.c | 7 +++++++ src/portable/renesas/rusb2/dcd_rusb2.c | 2 -- 32 files changed, 123 insertions(+), 3 deletions(-) (limited to 'src') diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c index 2b9c5143d..f5fc884bd 100644 --- a/examples/device/audio_4_channel_mic/src/main.c +++ b/examples/device/audio_4_channel_mic/src/main.c @@ -84,6 +84,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // Init values sampFreq = AUDIO_SAMPLE_RATE; clkValid = 1; diff --git a/examples/device/audio_test/src/main.c b/examples/device/audio_test/src/main.c index b5ca41d36..6dc655416 100644 --- a/examples/device/audio_test/src/main.c +++ b/examples/device/audio_test/src/main.c @@ -85,6 +85,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // Init values sampFreq = AUDIO_SAMPLE_RATE; clkValid = 1; diff --git a/examples/device/audio_test_multi_rate/src/main.c b/examples/device/audio_test_multi_rate/src/main.c index 078e783eb..637be2d40 100644 --- a/examples/device/audio_test_multi_rate/src/main.c +++ b/examples/device/audio_test_multi_rate/src/main.c @@ -99,6 +99,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // Init values sampFreq = sampleRatesList[0]; clkValid = 1; diff --git a/examples/device/cdc_dual_ports/src/main.c b/examples/device/cdc_dual_ports/src/main.c index 70eaea85d..7ceff73b3 100644 --- a/examples/device/cdc_dual_ports/src/main.c +++ b/examples/device/cdc_dual_ports/src/main.c @@ -42,6 +42,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/cdc_msc/src/main.c b/examples/device/cdc_msc/src/main.c index 6dad73cbf..87fc33181 100644 --- a/examples/device/cdc_msc/src/main.c +++ b/examples/device/cdc_msc/src/main.c @@ -58,6 +58,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 0e8a24d02..6cfef9ef5 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -136,6 +136,10 @@ void usb_device_task(void* param) // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // RTOS forever loop while (1) { diff --git a/examples/device/dfu/src/main.c b/examples/device/dfu/src/main.c index 5f37f25e1..bcd5b4942 100644 --- a/examples/device/dfu/src/main.c +++ b/examples/device/dfu/src/main.c @@ -77,6 +77,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/dfu_runtime/src/main.c b/examples/device/dfu_runtime/src/main.c index 4ec3cb188..beef1037d 100644 --- a/examples/device/dfu_runtime/src/main.c +++ b/examples/device/dfu_runtime/src/main.c @@ -72,6 +72,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/dynamic_configuration/src/main.c b/examples/device/dynamic_configuration/src/main.c index 578f01d8c..6c7789138 100644 --- a/examples/device/dynamic_configuration/src/main.c +++ b/examples/device/dynamic_configuration/src/main.c @@ -59,6 +59,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 1a155996a..47f68f8fa 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -59,6 +59,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index 8d0e6bece..d4c5f5b3e 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -60,6 +60,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index ca02af100..bdbe26b86 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -138,6 +138,10 @@ void usb_device_task(void* param) // Otherwise it could cause kernel issue since USB IRQ handler does use RTOS queue API. tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + // RTOS forever loop while (1) { diff --git a/examples/device/hid_generic_inout/src/main.c b/examples/device/hid_generic_inout/src/main.c index 5db8f5581..5b3e53b06 100644 --- a/examples/device/hid_generic_inout/src/main.c +++ b/examples/device/hid_generic_inout/src/main.c @@ -83,6 +83,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/hid_multiple_interface/src/main.c b/examples/device/hid_multiple_interface/src/main.c index 72240b208..94f845a84 100644 --- a/examples/device/hid_multiple_interface/src/main.c +++ b/examples/device/hid_multiple_interface/src/main.c @@ -64,6 +64,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/midi_test/src/main.c b/examples/device/midi_test/src/main.c index 2c3e9d954..c77207ca2 100644 --- a/examples/device/midi_test/src/main.c +++ b/examples/device/midi_test/src/main.c @@ -65,6 +65,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/msc_dual_lun/src/main.c b/examples/device/msc_dual_lun/src/main.c index c7f6de7bf..d8abb5151 100644 --- a/examples/device/msc_dual_lun/src/main.c +++ b/examples/device/msc_dual_lun/src/main.c @@ -57,6 +57,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c index 19a0eae9d..22543880e 100644 --- a/examples/device/net_lwip_webserver/src/main.c +++ b/examples/device/net_lwip_webserver/src/main.c @@ -232,6 +232,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + /* initialize lwip, dhcp-server, dns-server, and http */ init_lwip(); while (!netif_is_up(&netif_data)); diff --git a/examples/device/uac2_headset/src/main.c b/examples/device/uac2_headset/src/main.c index 19a3f7bae..c502eb10d 100644 --- a/examples/device/uac2_headset/src/main.c +++ b/examples/device/uac2_headset/src/main.c @@ -105,6 +105,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + TU_LOG1("Headset running\r\n"); while (1) diff --git a/examples/device/usbtmc/src/main.c b/examples/device/usbtmc/src/main.c index 2bba336f1..fa7de7570 100644 --- a/examples/device/usbtmc/src/main.c +++ b/examples/device/usbtmc/src/main.c @@ -57,6 +57,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 5654e0b61..b942dd30e 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -59,6 +59,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index eaca78c73..f63d0ccea 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -96,6 +96,10 @@ int main(void) // init device stack on configured roothub port tud_init(BOARD_TUD_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c index 817c63c70..5a31b9dda 100644 --- a/examples/dual/host_hid_to_device_cdc/src/main.c +++ b/examples/dual/host_hid_to_device_cdc/src/main.c @@ -83,6 +83,10 @@ int main(void) tud_init(BOARD_TUD_RHPORT); tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { tud_task(); // tinyusb device task diff --git a/examples/host/bare_api/src/main.c b/examples/host/bare_api/src/main.c index bb7fa850e..7286befe0 100644 --- a/examples/host/bare_api/src/main.c +++ b/examples/host/bare_api/src/main.c @@ -67,6 +67,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task diff --git a/examples/host/cdc_msc_hid/src/main.c b/examples/host/cdc_msc_hid/src/main.c index 1f4acb822..51251be5c 100644 --- a/examples/host/cdc_msc_hid/src/main.c +++ b/examples/host/cdc_msc_hid/src/main.c @@ -48,6 +48,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task diff --git a/examples/host/hid_controller/src/main.c b/examples/host/hid_controller/src/main.c index 4dcc92587..a4ab2f711 100644 --- a/examples/host/hid_controller/src/main.c +++ b/examples/host/hid_controller/src/main.c @@ -54,6 +54,10 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + if (board_init_after_tusb) { + board_init_after_tusb(); + } + while (1) { // tinyusb host task diff --git a/examples/host/msc_file_explorer/src/main.c b/examples/host/msc_file_explorer/src/main.c index 7b1c2ef27..fc4b4e669 100644 --- a/examples/host/msc_file_explorer/src/main.c +++ b/examples/host/msc_file_explorer/src/main.c @@ -80,6 +80,11 @@ int main(void) // init host stack on configured roothub port tuh_init(BOARD_TUH_RHPORT); + + if (board_init_after_tusb) { + board_init_after_tusb(); + } + msc_app_init(); while (1) diff --git a/examples/make.mk b/examples/make.mk index 3c3a920cc..4001a5359 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -116,6 +116,8 @@ INC += \ $(TOP)/$(FAMILY_PATH) \ $(TOP)/src \ +BOARD_UPPER = $(shell echo $(BOARD) | tr a-z A-Z) +CFLAGS += -DBOARD_$(BOARD_UPPER) # Log level is mapped to TUSB DEBUG option ifneq ($(LOG),) diff --git a/hw/bsp/board.h b/hw/bsp/board.h index 036556731..d782013bb 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -54,6 +54,9 @@ // Initialize on-board peripherals : led, button, uart and USB void board_init(void); +// Init board after tinyusb is initialized +void board_init_after_tusb(void) TU_ATTR_WEAK; + // Turn LED on or off void board_led_write(bool state); diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index d8298c8ad..db1ce988e 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -181,6 +181,11 @@ endfunction() function(family_configure_common TARGET RTOS) family_add_rtos(${TARGET} ${RTOS}) + string(TOUPPER ${BOARD} BOARD_UPPER) + target_compile_definitions(${TARGET} PUBLIC + BOARD_${BOARD_UPPER} + ) + # run size after build add_custom_command(TARGET ${TARGET} POST_BUILD COMMAND ${CMAKE_SIZE} $ diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk index cbe6c782c..b7075eec0 100644 --- a/hw/bsp/ra/boards/uno_r4/board.mk +++ b/hw/bsp/ra/boards/uno_r4/board.mk @@ -1,7 +1,7 @@ CPU_CORE = cortex-m4 MCU_VARIANT = ra4m1 -LD_FILE = $(BOARD_PATH)/${BOARD}.ld +LD_FILE = ${BOARD_PATH}/${BOARD}.ld # For flash-jlink target JLINK_DEVICE = R7FA4M1AB diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c index 096f0d0ff..e6213061d 100644 --- a/hw/bsp/ra/family.c +++ b/hw/bsp/ra/family.c @@ -124,6 +124,13 @@ void board_init(void) { board_led_write(false); } +void board_init_after_tusb(void) { + // For board that use USB LDO regulator +#if defined(BOARD_UNO_R4) + R_USB_FS0->USBMC |= R_USB_FS0_USBMC_VDCEN_Msk; +#endif +} + void board_led_write(bool state) { R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); } diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 37fd93497..9a3983f56 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -726,8 +726,6 @@ void dcd_init(uint8_t rhport) rusb->PHYSLEW = 0x5; rusb->DPUSR0R_FS_b.FIXPHY0 = 0u; /* USB_BASE Transceiver Output fixed */ - - // rusb2->USBMC = (uint16_t) (rusb2->USBMC | RUSB2_USBMC_VDCEN_Msk); } /* Setup default control pipe */ -- cgit v1.3.1 From 965627e81c63a76bb80d8319cbd9adf931a00595 Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Tue, 1 Aug 2023 11:41:33 +0200 Subject: rusb2: move dynamic irq function to c file --- hw/bsp/ra/family.cmake | 5 +++-- hw/bsp/ra/family.mk | 1 + src/portable/renesas/rusb2/dcd_rusb2.c | 5 ----- src/portable/renesas/rusb2/rusb2_ra.c | 16 ++++++++++++++++ src/portable/renesas/rusb2/rusb2_ra.h | 9 +-------- 5 files changed, 21 insertions(+), 15 deletions(-) create mode 100644 src/portable/renesas/rusb2/rusb2_ra.c (limited to 'src') diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 307e01da8..2d079dc94 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -114,8 +114,9 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_RAXXX ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c - ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/rusb2_ra.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index cf8e5d9e9..3394d41b4 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -32,6 +32,7 @@ endif SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ + src/portable/renesas/rusb2/rusb2_ra.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \ $(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \ diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 9a3983f56..3ec1b70b5 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -50,11 +50,6 @@ #define D0FIFOCTR_b CFIFOCTR_b #endif - // Application API for setting IRQ number - void tud_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum) { - rusb2_controller[rhport].irqnum = irqnum; - } - #else #error "Unsupported MCU" #endif diff --git a/src/portable/renesas/rusb2/rusb2_ra.c b/src/portable/renesas/rusb2/rusb2_ra.c new file mode 100644 index 000000000..bbffd712e --- /dev/null +++ b/src/portable/renesas/rusb2/rusb2_ra.c @@ -0,0 +1,16 @@ +#include "tusb_option.h" +#include "device/dcd.h" +#include "rusb2_type.h" +#include "rusb2_ra.h" + +rusb2_controller_t rusb2_controller[] = { + { .reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn }, + #ifdef RUSB2_SUPPORT_HIGHSPEED + { .reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn }, + #endif +}; + +// Application API for setting IRQ number +void tud_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum) { + rusb2_controller[rhport].irqnum = irqnum; +} \ No newline at end of file diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 7ff272bbc..4774d2e2c 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -74,14 +74,7 @@ typedef struct { #define rusb2_is_highspeed_reg(_reg) (false) #endif -// USBFS_INT_IRQn and USBHS_USB_INT_RESUME_IRQn are generated by FSP -static rusb2_controller_t rusb2_controller[] = { - { .reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn }, - #ifdef RUSB2_SUPPORT_HIGHSPEED - { .reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn }, - #endif -}; - +extern rusb2_controller_t rusb2_controller[]; #define RUSB2_REG(_p) ((rusb2_reg_t*) rusb2_controller[_p].reg_base) //--------------------------------------------------------------------+ -- cgit v1.3.1 From 04f1a34c39e109002c89e464103ebed6128c2903 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 1 Aug 2023 17:03:07 +0700 Subject: add rusb2_common.c for dynami irq --- hw/bsp/ra/family.cmake | 1 + hw/bsp/ra/family.mk | 1 + src/portable/renesas/rusb2/dcd_rusb2.c | 5 --- src/portable/renesas/rusb2/hcd_rusb2.c | 6 --- src/portable/renesas/rusb2/rusb2_common.c | 61 +++++++++++++++++++++++++++++++ src/portable/renesas/rusb2/rusb2_ra.h | 8 +--- src/portable/renesas/rusb2/rusb2_type.h | 1 + 7 files changed, 65 insertions(+), 18 deletions(-) create mode 100644 src/portable/renesas/rusb2/rusb2_common.c (limited to 'src') diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 307e01da8..11bc7c668 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -116,6 +116,7 @@ function(family_configure_example TARGET RTOS) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/rusb2_common.c ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index 901808958..9afb38e06 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -34,6 +34,7 @@ endif SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ + src/portable/renesas/rusb2/rusb2_common.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \ $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \ $(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \ diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 9a3983f56..3ec1b70b5 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -50,11 +50,6 @@ #define D0FIFOCTR_b CFIFOCTR_b #endif - // Application API for setting IRQ number - void tud_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum) { - rusb2_controller[rhport].irqnum = irqnum; - } - #else #error "Unsupported MCU" #endif diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 7f49dc8a9..621320095 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -34,14 +34,8 @@ #if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) #include "rusb2_rx.h" - #elif TU_CHECK_MCU(OPT_MCU_RAXXX) #include "rusb2_ra.h" - -// void osal_task_delay(uint32_t msec) { -// R_BSP_SoftwareDelay(msec, BSP_DELAY_UNITS_MILLISECONDS); -// } - #else #error "Unsupported MCU" #endif diff --git a/src/portable/renesas/rusb2/rusb2_common.c b/src/portable/renesas/rusb2/rusb2_common.c new file mode 100644 index 000000000..850060777 --- /dev/null +++ b/src/portable/renesas/rusb2/rusb2_common.c @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if defined(TUP_USBIP_RUSB2) && (CFG_TUH_ENABLED || CFG_TUD_ENABLED) + +#include "rusb2_type.h" + +#if TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N) +#include "rusb2_rx.h" + +#elif TU_CHECK_MCU(OPT_MCU_RAXXX) +#include "rusb2_ra.h" + +// USBFS_INT_IRQn and USBHS_USB_INT_RESUME_IRQn are generated by FSP +rusb2_controller_t rusb2_controller[] = { + { .reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn }, + #ifdef RUSB2_SUPPORT_HIGHSPEED + { .reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn }, + #endif +}; + +// Application API for setting IRQ number. May throw warnings for missing prototypes. +void tusb_rusb2_set_irqnum(uint8_t rhport, int32_t irqnum) { + rusb2_controller[rhport].irqnum = irqnum; +} + +// void osal_task_delay(uint32_t msec) { +// R_BSP_SoftwareDelay(msec, BSP_DELAY_UNITS_MILLISECONDS); +// } + +#else + #error "Unsupported MCU" +#endif + + +#endif diff --git a/src/portable/renesas/rusb2/rusb2_ra.h b/src/portable/renesas/rusb2/rusb2_ra.h index 7ff272bbc..259d3cbdb 100644 --- a/src/portable/renesas/rusb2/rusb2_ra.h +++ b/src/portable/renesas/rusb2/rusb2_ra.h @@ -74,13 +74,7 @@ typedef struct { #define rusb2_is_highspeed_reg(_reg) (false) #endif -// USBFS_INT_IRQn and USBHS_USB_INT_RESUME_IRQn are generated by FSP -static rusb2_controller_t rusb2_controller[] = { - { .reg_base = R_USB_FS0_BASE, .irqnum = USBFS_INT_IRQn }, - #ifdef RUSB2_SUPPORT_HIGHSPEED - { .reg_base = R_USB_HS0_BASE, .irqnum = USBHS_USB_INT_RESUME_IRQn }, - #endif -}; +extern rusb2_controller_t rusb2_controller[]; #define RUSB2_REG(_p) ((rusb2_reg_t*) rusb2_controller[_p].reg_base) diff --git a/src/portable/renesas/rusb2/rusb2_type.h b/src/portable/renesas/rusb2/rusb2_type.h index 005d7f2be..dd88f66a7 100644 --- a/src/portable/renesas/rusb2/rusb2_type.h +++ b/src/portable/renesas/rusb2/rusb2_type.h @@ -28,6 +28,7 @@ #define _TUSB_RUSB2_TYPE_H_ #include +#include #ifdef __cplusplus extern "C" { -- cgit v1.3.1 From edee46e7941f56f5024bf60d56921cfe10d1f7a5 Mon Sep 17 00:00:00 2001 From: Martino Facchin Date: Tue, 1 Aug 2023 15:21:31 +0200 Subject: renesas: host: remove attach_attempt logic --- src/portable/renesas/rusb2/hcd_rusb2.c | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 621320095..f6683529a 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -774,7 +774,6 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { void hcd_int_handler(uint8_t rhport) { rusb2_reg_t* rusb = RUSB2_REG(rhport); - static unsigned char attach_attempt = 0; // TODO remove later unsigned is0 = rusb->INTSTS0; unsigned is1 = rusb->INTSTS1; @@ -789,23 +788,14 @@ void hcd_int_handler(uint8_t rhport) if (is1 & RUSB2_INTSTS1_SACK_Msk) { /* Set DATA1 in advance for the next transfer. */ rusb->DCPCTR_b.SQSET = 1; - attach_attempt = 0; hcd_event_xfer_complete(rusb->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_SUCCESS, true); } if (is1 & RUSB2_INTSTS1_SIGN_Msk) { hcd_event_xfer_complete(rusb->DCPMAXP_b.DEVSEL, tu_edpt_addr(0, TUSB_DIR_OUT), 8, XFER_RESULT_FAILED, true); - if(attach_attempt > 0) { - rusb->DVSTCTR0_b.UACT = 1; - _hcd.need_reset = true; - rusb->INTENB1 = (rusb->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; - hcd_event_device_attach(rhport, true); - } - attach_attempt--; } if (is1 & RUSB2_INTSTS1_ATTCH_Msk) { - attach_attempt = 10; rusb->DVSTCTR0_b.UACT = 1; _hcd.need_reset = true; rusb->INTENB1 = (rusb->INTENB1 & ~RUSB2_INTSTS1_ATTCH_Msk) | RUSB2_INTSTS1_DTCH_Msk; -- cgit v1.3.1 From 979bf32266d379ec493ad31001b815d6a597b91e Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Aug 2023 15:34:18 +0700 Subject: default class driver log level to CFG_TUH/TUD_LOG_LEVEL allow application to selectively disable usbd/usbh or driver log --- src/class/cdc/cdc_device.c | 15 +++++++++++---- src/class/cdc/cdc_host.c | 9 ++++++--- src/class/dfu/dfu_device.c | 11 +++++++++-- src/class/dfu/dfu_rt_device.c | 13 ++++++++++--- src/class/hid/hid_host.c | 8 +++++--- src/class/msc/msc_device.c | 2 +- src/class/msc/msc_host.c | 19 +++++++++++-------- src/class/net/ncm_device.c | 11 +++++++++-- src/class/video/video_device.c | 23 +++++++++++++++-------- src/host/usbh.c | 7 ------- src/host/usbh_classdriver.h | 7 +++++++ 11 files changed, 84 insertions(+), 41 deletions(-) (limited to 'src') diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index f658df4d0..70d9c2e24 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -33,6 +33,13 @@ #include "cdc_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_CDC_LOG_LEVEL + #define CFG_TUD_CDC_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_CDC_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -353,7 +360,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t case CDC_REQUEST_SET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { - TU_LOG2(" Set Line Coding\r\n"); + TU_LOG_DRV(" Set Line Coding\r\n"); tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } else if ( stage == CONTROL_STAGE_ACK) @@ -365,7 +372,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t case CDC_REQUEST_GET_LINE_CODING: if (stage == CONTROL_STAGE_SETUP) { - TU_LOG2(" Get Line Coding\r\n"); + TU_LOG_DRV(" Get Line Coding\r\n"); tud_control_xfer(rhport, request, &p_cdc->line_coding, sizeof(cdc_line_coding_t)); } break; @@ -390,7 +397,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t // Disable fifo overwriting if DTR bit is set tu_fifo_set_overwritable(&p_cdc->tx_ff, !dtr); - TU_LOG2(" Set Control Line State: DTR = %d, RTS = %d\r\n", dtr, rts); + TU_LOG_DRV(" Set Control Line State: DTR = %d, RTS = %d\r\n", dtr, rts); // Invoke callback if ( tud_cdc_line_state_cb ) tud_cdc_line_state_cb(itf, dtr, rts); @@ -403,7 +410,7 @@ bool cdcd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t } else if (stage == CONTROL_STAGE_ACK) { - TU_LOG2(" Send Break\r\n"); + TU_LOG_DRV(" Send Break\r\n"); if ( tud_cdc_send_break_cb ) tud_cdc_send_break_cb(itf, request->wValue); } break; diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index ce9f27c33..7f9ed18b3 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -33,9 +33,12 @@ #include "cdc_host.h" -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define CDCH_DEBUG 2 -#define TU_LOG_DRV(...) TU_LOG(CDCH_DEBUG, __VA_ARGS__) +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUH_CDC_LOG_LEVEL + #define CFG_TUH_CDC_LOG_LEVEL CFG_TUH_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUH_CDC_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // Host CDC Interface diff --git a/src/class/dfu/dfu_device.c b/src/class/dfu/dfu_device.c index bffdb8376..3e7c13dea 100644 --- a/src/class/dfu/dfu_device.c +++ b/src/class/dfu/dfu_device.c @@ -37,6 +37,13 @@ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_DFU_LOG_LEVEL + #define CFG_TUD_DFU_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_DFU_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -205,7 +212,7 @@ bool dfu_moded_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_reque { TU_VERIFY(request->bmRequestType_bit.recipient == TUSB_REQ_RCPT_INTERFACE); - TU_LOG2(" DFU State : %s, Status: %s\r\n", tu_lookup_find(&_dfu_state_table, _dfu_ctx.state), tu_lookup_find(&_dfu_status_table, _dfu_ctx.status)); + TU_LOG_DRV(" DFU State : %s, Status: %s\r\n", tu_lookup_find(&_dfu_state_table, _dfu_ctx.state), tu_lookup_find(&_dfu_status_table, _dfu_ctx.status)); if ( request->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD ) { @@ -235,7 +242,7 @@ bool dfu_moded_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_reque } else if ( request->bmRequestType_bit.type == TUSB_REQ_TYPE_CLASS ) { - TU_LOG2(" DFU Request: %s\r\n", tu_lookup_find(&_dfu_request_table, request->bRequest)); + TU_LOG_DRV(" DFU Request: %s\r\n", tu_lookup_find(&_dfu_request_table, request->bRequest)); // Class request switch ( request->bRequest ) diff --git a/src/class/dfu/dfu_rt_device.c b/src/class/dfu/dfu_rt_device.c index 7b77b3f8f..a940d8d62 100644 --- a/src/class/dfu/dfu_rt_device.c +++ b/src/class/dfu/dfu_rt_device.c @@ -37,6 +37,13 @@ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_DFU_RUNTIME_LOG_LEVEL + #define CFG_TUD_DFU_RUNTIME_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_DFU_RUNTIME_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ @@ -99,7 +106,7 @@ bool dfu_rtd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request { case DFU_REQUEST_DETACH: { - TU_LOG2(" DFU RT Request: DETACH\r\n"); + TU_LOG_DRV(" DFU RT Request: DETACH\r\n"); tud_control_status(rhport, request); tud_dfu_runtime_reboot_to_dfu_cb(); } @@ -107,7 +114,7 @@ bool dfu_rtd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request case DFU_REQUEST_GETSTATUS: { - TU_LOG2(" DFU RT Request: GETSTATUS\r\n"); + TU_LOG_DRV(" DFU RT Request: GETSTATUS\r\n"); dfu_status_response_t resp; // Status = OK, Poll timeout is ignored during RT, State = APP_IDLE, IString = 0 TU_VERIFY(tu_memset_s(&resp, sizeof(resp), 0x00, sizeof(resp))==0); @@ -117,7 +124,7 @@ bool dfu_rtd_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request default: { - TU_LOG2(" DFU RT Unexpected Request: %d\r\n", request->bRequest); + TU_LOG_DRV(" DFU RT Unexpected Request: %d\r\n", request->bRequest); return false; // stall unsupported request } } diff --git a/src/class/hid/hid_host.c b/src/class/hid/hid_host.c index 6abe298e5..4253170d4 100644 --- a/src/class/hid/hid_host.c +++ b/src/class/hid/hid_host.c @@ -33,10 +33,12 @@ #include "hid_host.h" -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define HIDH_DEBUG 2 -#define TU_LOG_DRV(...) TU_LOG(HIDH_DEBUG, __VA_ARGS__) +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUH_HID_LOG_LEVEL + #define CFG_TUH_HID_LOG_LEVEL CFG_TUH_LOG_LEVEL +#endif +#define TU_LOG_DRV(...) TU_LOG(CFG_TUH_HID_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index a602e9672..2589dcd2c 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -36,7 +36,7 @@ // Level where CFG_TUSB_DEBUG must be at least for this driver is logged #ifndef CFG_TUD_MSC_LOG_LEVEL - #define CFG_TUD_MSC_LOG_LEVEL 2 + #define CFG_TUD_MSC_LOG_LEVEL CFG_TUD_LOG_LEVEL #endif #define TU_LOG_DRV(...) TU_LOG(CFG_TUD_MSC_LOG_LEVEL, __VA_ARGS__) diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index d32c0adb0..a65208d69 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -33,9 +33,12 @@ #include "msc_host.h" -// Debug level, TUSB_CFG_DEBUG must be at least this level for debug message -#define MSCH_DEBUG 2 -#define TU_LOG_MSCH(...) TU_LOG(MSCH_DEBUG, __VA_ARGS__) +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUH_MSC_LOG_LEVEL + #define CFG_TUH_MSC_LOG_LEVEL CFG_TUH_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUH_MSC_LOG_LEVEL, __VA_ARGS__) //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF @@ -308,7 +311,7 @@ void msch_close(uint8_t dev_addr) msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->configured, ); - TU_LOG_MSCH(" MSCh close addr = %d\r\n", dev_addr); + TU_LOG_DRV(" MSCh close addr = %d\r\n", dev_addr); // invoke Application Callback if (p_msc->mounted) { @@ -426,7 +429,7 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) p_msc->configured = true; //------------- Get Max Lun -------------// - TU_LOG_MSCH("MSC Get Max Lun\r\n"); + TU_LOG_DRV("MSC Get Max Lun\r\n"); tusb_control_request_t const request = { .bmRequestType_bit = @@ -465,7 +468,7 @@ static void config_get_maxlun_complete (tuh_xfer_t* xfer) p_msc->max_lun++; // MAX LUN is minus 1 by specs // TODO multiple LUN support - TU_LOG_MSCH("SCSI Test Unit Ready\r\n"); + TU_LOG_DRV("SCSI Test Unit Ready\r\n"); uint8_t const lun = 0; tuh_msc_test_unit_ready(daddr, lun, config_test_unit_ready_complete, 0); } @@ -478,14 +481,14 @@ static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_d if (csw->status == 0) { // Unit is ready, read its capacity - TU_LOG_MSCH("SCSI Read Capacity\r\n"); + TU_LOG_DRV("SCSI Read Capacity\r\n"); tuh_msc_read_capacity(dev_addr, cbw->lun, (scsi_read_capacity10_resp_t*) ((void*) _msch_buffer), config_read_capacity_complete, 0); }else { // Note: During enumeration, some device fails Test Unit Ready and require a few retries // with Request Sense to start working !! // TODO limit number of retries - TU_LOG_MSCH("SCSI Request Sense\r\n"); + TU_LOG_DRV("SCSI Request Sense\r\n"); TU_ASSERT(tuh_msc_request_sense(dev_addr, cbw->lun, _msch_buffer, config_request_sense_complete, 0)); } diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 611dc3348..226c42c4e 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -34,6 +34,13 @@ #include "device/usbd_pvt.h" #include "net_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_NCM_LOG_LEVEL + #define CFG_TUD_NCM_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_NCM_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -473,13 +480,13 @@ bool tud_network_can_xmit(uint16_t size) TU_VERIFY(ncm_interface.itf_data_alt == 1); if (ncm_interface.datagram_count >= ncm_interface.max_datagrams_per_ntb) { - TU_LOG2("NTB full [by count]\r\n"); + TU_LOG_DRV("NTB full [by count]\r\n"); return false; } size_t next_datagram_offset = ncm_interface.next_datagram_offset; if (next_datagram_offset + size > ncm_interface.ntb_in_size) { - TU_LOG2("ntb full [by size]\r\n"); + TU_LOG_DRV("ntb full [by size]\r\n"); return false; } diff --git a/src/class/video/video_device.c b/src/class/video/video_device.c index e6fadf41b..abc43ccff 100644 --- a/src/class/video/video_device.c +++ b/src/class/video/video_device.c @@ -34,6 +34,13 @@ #include "video_device.h" +// Level where CFG_TUSB_DEBUG must be at least for this driver is logged +#ifndef CFG_TUD_VIDEO_LOG_LEVEL + #define CFG_TUD_VIDEO_LOG_LEVEL CFG_TUD_LOG_LEVEL +#endif + +#define TU_LOG_DRV(...) TU_LOG(CFG_TUD_VIDEO_LOG_LEVEL, __VA_ARGS__) + //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ @@ -609,17 +616,17 @@ static bool _close_vc_itf(uint8_t rhport, videod_interface_t *self) * @param[in] altnum The target alternate setting number. */ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t altnum) { - TU_LOG2(" open VC %d\n", altnum); + TU_LOG_DRV(" open VC %d\n", altnum); uint8_t const *beg = self->beg; uint8_t const *end = beg + self->len; /* The first descriptor is a video control interface descriptor. */ uint8_t const *cur = _find_desc_itf(beg, end, _desc_itfnum(beg), altnum); - TU_LOG2(" cur %d\n", cur - beg); + TU_LOG_DRV(" cur %d\n", cur - beg); TU_VERIFY(cur < end); tusb_desc_vc_itf_t const *vc = (tusb_desc_vc_itf_t const *)cur; - TU_LOG2(" bInCollection %d\n", vc->ctl.bInCollection); + TU_LOG_DRV(" bInCollection %d\n", vc->ctl.bInCollection); /* Support for up to 2 streaming interfaces only. */ TU_ASSERT(vc->ctl.bInCollection <= CFG_TUD_VIDEO_STREAMING); @@ -628,7 +635,7 @@ static bool _open_vc_itf(uint8_t rhport, videod_interface_t *self, uint_fast8_t /* Advance to the next descriptor after the class-specific VC interface header descriptor. */ cur += vc->std.bLength + vc->ctl.bLength; - TU_LOG2(" bNumEndpoints %d\n", vc->std.bNumEndpoints); + TU_LOG_DRV(" bNumEndpoints %d\n", vc->std.bNumEndpoints); /* Open the notification endpoint if it exist. */ if (vc->std.bNumEndpoints) { /* Support for 1 endpoint only. */ @@ -662,7 +669,7 @@ static bool _init_vs_configuration(videod_streaming_interface_t *stm) static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint_fast8_t altnum) { uint_fast8_t i; - TU_LOG2(" reopen VS %d\n", altnum); + TU_LOG_DRV(" reopen VS %d\n", altnum); uint8_t const *desc = _videod_itf[stm->index_vc].beg; /* Close endpoints of previous settings. */ @@ -672,7 +679,7 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint uint8_t ep_adr = _desc_ep_addr(desc + ofs_ep); usbd_edpt_close(rhport, ep_adr); stm->desc.ep[i] = 0; - TU_LOG2(" close EP%02x\n", ep_adr); + TU_LOG_DRV(" close EP%02x\n", ep_adr); } /* clear transfer management information */ @@ -709,12 +716,12 @@ static bool _open_vs_itf(uint8_t rhport, videod_streaming_interface_t *stm, uint } TU_ASSERT(usbd_edpt_open(rhport, ep)); stm->desc.ep[i] = (uint16_t) (cur - desc); - TU_LOG2(" open EP%02x\n", _desc_ep_addr(cur)); + TU_LOG_DRV(" open EP%02x\n", _desc_ep_addr(cur)); } if (altnum) { stm->state = VS_STATE_STREAMING; } - TU_LOG2(" done\n"); + TU_LOG_DRV(" done\n"); return true; } diff --git a/src/host/usbh.c b/src/host/usbh.c index c8eb91be3..49f8c78f1 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -45,13 +45,6 @@ #define CFG_TUH_INTERFACE_MAX 8 #endif -// Level where CFG_TUSB_DEBUG must be at least for USBH is logged -#ifndef CFG_TUH_LOG_LEVEL - #define CFG_TUH_LOG_LEVEL 2 -#endif - -#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) - //--------------------------------------------------------------------+ // USBH-HCD common data structure //--------------------------------------------------------------------+ diff --git a/src/host/usbh_classdriver.h b/src/host/usbh_classdriver.h index be9811641..308b4418a 100644 --- a/src/host/usbh_classdriver.h +++ b/src/host/usbh_classdriver.h @@ -35,6 +35,13 @@ extern "C" { #endif +// Level where CFG_TUSB_DEBUG must be at least for USBH is logged +#ifndef CFG_TUH_LOG_LEVEL + #define CFG_TUH_LOG_LEVEL 2 +#endif + +#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) + enum { USBH_EPSIZE_BULK_MAX = (TUH_OPT_HIGH_SPEED ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS) }; -- cgit v1.3.1 From 9560d0813f0872a1b8dfb337922b0ab5cc4cb811 Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Wed, 2 Aug 2023 15:25:08 +0200 Subject: Set unmounted on configuration reset --- src/device/usbd.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/device/usbd.c b/src/device/usbd.c index 9429cf664..b4ca63c9c 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -965,7 +965,14 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) } // invoke callback - if (tud_mount_cb) tud_mount_cb(); + if (cfg_num) + { + if (tud_mount_cb) tud_mount_cb(); + } + else + { + if (tud_umount_cb) tud_umount_cb(); + } return true; } -- cgit v1.3.1 From d09604d6364f4840669eda66a75f5df0926bb3e0 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 11:07:23 +0700 Subject: Revert "Name queues for easier FreeRTOS debugging with task- and queue-aware debuggers" This reverts commit 11fba59319d81fb9502fbf399abb4fe27cf3fa29. --- src/device/usbd.c | 4 ++-- src/host/usbh.c | 4 ++-- src/osal/osal_freertos.h | 5 ++--- 3 files changed, 6 insertions(+), 7 deletions(-) (limited to 'src') diff --git a/src/device/usbd.c b/src/device/usbd.c index b6c679b22..44c2530ce 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -279,7 +279,7 @@ tu_static uint8_t _usbd_rhport = RHPORT_INVALID; // Event queue // usbd_int_set() is used as mutex in OS NONE config -OSAL_QUEUE_DEF(usbd_int_set, usbd_events, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); +OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t); tu_static osal_queue_t _usbd_q; // Mutex for claiming endpoint @@ -410,7 +410,7 @@ bool tud_init (uint8_t rhport) #endif // Init device queue & task - _usbd_q = osal_queue_create(&usbd_events); + _usbd_q = osal_queue_create(&_usbd_qdef); TU_ASSERT(_usbd_q); // Get application driver if available diff --git a/src/host/usbh.c b/src/host/usbh.c index 987ff7a6e..f3e9d3858 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -219,7 +219,7 @@ static usbh_device_t _usbh_devices[TOTAL_DEVICES]; // Event queue // usbh_int_set is used as mutex in OS NONE config -OSAL_QUEUE_DEF(usbh_int_set, usbh_events, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); +OSAL_QUEUE_DEF(usbh_int_set, _usbh_qdef, CFG_TUH_TASK_QUEUE_SZ, hcd_event_t); static osal_queue_t _usbh_q; CFG_TUH_MEM_SECTION CFG_TUH_MEM_ALIGN @@ -330,7 +330,7 @@ bool tuh_init(uint8_t controller_id) TU_LOG_INT(USBH_DEBUG, sizeof(tu_edpt_stream_t)); // Event queue - _usbh_q = osal_queue_create( &usbh_events ); + _usbh_q = osal_queue_create( &_usbh_qdef ); TU_ASSERT(_usbh_q != NULL); #if OSAL_MUTEX_REQUIRED diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index e83277eb3..0b1b11589 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -56,7 +56,7 @@ typedef SemaphoreHandle_t osal_mutex_t; // _int_set is not used with an RTOS #define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ static _type _name##_##buf[_depth];\ - osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, .pQueueName = #_name }; + osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf }; typedef struct { @@ -66,7 +66,6 @@ typedef struct #if configSUPPORT_STATIC_ALLOCATION StaticQueue_t sq; #endif - const char* pQueueName; }osal_queue_def_t; typedef QueueHandle_t osal_queue_t; @@ -177,7 +176,7 @@ TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_de q = xQueueCreate(qdef->depth, qdef->item_sz); #endif #if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) - vQueueAddToRegistry(q, qdef->pQueueName); + vQueueAddToRegistry(q, "tinyUSB"); #endif return q; } -- cgit v1.3.1 From 473f37df958f74153f15c050c20d63f8defe89ed Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 12:05:21 +0700 Subject: add osal queue name if needed also mass change configQUEUE_REGISTRY_SIZE = 4 --- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- .../src/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- src/osal/osal_freertos.h | 108 ++++++++++----------- 18 files changed, 68 insertions(+), 74 deletions(-) (limited to 'src') diff --git a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 9bef9bbbf..69d638288 100644 --- a/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/cdc_msc_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,7 +81,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h index 9bef9bbbf..69d638288 100644 --- a/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h +++ b/examples/device/hid_composite_freertos/src/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,7 +81,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h index f95927069..b65d8f1f9 100644 --- a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h index a46af1759..2a2bce261 100644 --- a/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/kinetis_kl/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h index 1b3c64e0b..ea568dfc9 100644 --- a/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc18/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 3 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h index 96611ca1c..a48b54576 100644 --- a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h index b1cef793e..fc0ab1f2d 100644 --- a/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/lpc55/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h index b1cef793e..fc0ab1f2d 100644 --- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h index a56f243ea..efd26a3a7 100644 --- a/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/nrf/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h index 8c39a2fb8..4ef5dd883 100644 --- a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -81,7 +81,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h index fc2f9fc67..33440d288 100644 --- a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h index 5a6b2300b..580fe02bb 100644 --- a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h index 815e567dd..4615640ed 100644 --- a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h index c8736f6d1..02bfaf97a 100644 --- a/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g0/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h index 95fcbb08a..17c2a0c5c 100644 --- a/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32g4/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h index 6881385a8..6a1f6c043 100644 --- a/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32h7/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h index e6a735ddd..c12b0dc85 100644 --- a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/src/osal/osal_freertos.h b/src/osal/osal_freertos.h index 0b1b11589..501e0bddd 100644 --- a/src/osal/osal_freertos.h +++ b/src/osal/osal_freertos.h @@ -52,53 +52,60 @@ extern "C" { typedef SemaphoreHandle_t osal_semaphore_t; typedef SemaphoreHandle_t osal_mutex_t; - -// _int_set is not used with an RTOS -#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ - static _type _name##_##buf[_depth];\ - osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf }; +typedef QueueHandle_t osal_queue_t; typedef struct { uint16_t depth; uint16_t item_sz; void* buf; + +#if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) + char const* name; +#endif + #if configSUPPORT_STATIC_ALLOCATION StaticQueue_t sq; #endif -}osal_queue_def_t; +} osal_queue_def_t; -typedef QueueHandle_t osal_queue_t; +#if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) + #define _OSAL_Q_NAME(_name) .name = #_name +#else + #define _OSAL_Q_NAME(_name) +#endif + +// _int_set is not used with an RTOS +#define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type) \ + static _type _name##_##buf[_depth];\ + osal_queue_def_t _name = { .depth = _depth, .item_sz = sizeof(_type), .buf = _name##_##buf, _OSAL_Q_NAME(_name) }; //--------------------------------------------------------------------+ // TASK API //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) -{ - if (msec == OSAL_TIMEOUT_WAIT_FOREVER) return portMAX_DELAY; - if (msec == 0) return 0; +TU_ATTR_ALWAYS_INLINE static inline uint32_t _osal_ms2tick(uint32_t msec) { + if ( msec == OSAL_TIMEOUT_WAIT_FOREVER ) return portMAX_DELAY; + if ( msec == 0 ) return 0; uint32_t ticks = pdMS_TO_TICKS(msec); // configTICK_RATE_HZ is less than 1000 and 1 tick > 1 ms // we still need to delay at least 1 tick - if (ticks == 0) ticks =1 ; + if ( ticks == 0 ) ticks = 1; return ticks; } -TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) -{ - vTaskDelay( pdMS_TO_TICKS(msec) ); +TU_ATTR_ALWAYS_INLINE static inline void osal_task_delay(uint32_t msec) { + vTaskDelay(pdMS_TO_TICKS(msec)); } //--------------------------------------------------------------------+ // Semaphore API //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t* semdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_semaphore_def_t *semdef) { #if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateBinaryStatic(semdef); #else @@ -107,14 +114,10 @@ TU_ATTR_ALWAYS_INLINE static inline osal_semaphore_t osal_semaphore_create(osal_ #endif } -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) -{ - if ( !in_isr ) - { +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t sem_hdl, bool in_isr) { + if ( !in_isr ) { return xSemaphoreGive(sem_hdl) != 0; - } - else - { + } else { BaseType_t xHigherPriorityTaskWoken = pdFALSE; BaseType_t res = xSemaphoreGiveFromISR(sem_hdl, &xHigherPriorityTaskWoken); @@ -129,13 +132,11 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_post(osal_semaphore_t se } } -TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_semaphore_wait(osal_semaphore_t sem_hdl, uint32_t msec) { return xSemaphoreTake(sem_hdl, _osal_ms2tick(msec)); } -TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t const sem_hdl) -{ +TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t const sem_hdl) { xQueueReset(sem_hdl); } @@ -143,8 +144,7 @@ TU_ATTR_ALWAYS_INLINE static inline void osal_semaphore_reset(osal_semaphore_t c // MUTEX API (priority inheritance) //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t* mdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_def_t *mdef) { #if configSUPPORT_STATIC_ALLOCATION return xSemaphoreCreateMutexStatic(mdef); #else @@ -153,13 +153,11 @@ TU_ATTR_ALWAYS_INLINE static inline osal_mutex_t osal_mutex_create(osal_mutex_de #endif } -TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock(osal_mutex_t mutex_hdl, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_lock(osal_mutex_t mutex_hdl, uint32_t msec) { return osal_semaphore_wait(mutex_hdl, msec); } -TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hdl) { return xSemaphoreGive(mutex_hdl); } @@ -167,38 +165,35 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_mutex_unlock(osal_mutex_t mutex_hd // QUEUE API //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) -{ +TU_ATTR_ALWAYS_INLINE static inline osal_queue_t osal_queue_create(osal_queue_def_t* qdef) { osal_queue_t q; - #if configSUPPORT_STATIC_ALLOCATION - q = xQueueCreateStatic(qdef->depth, qdef->item_sz, (uint8_t*) qdef->buf, &qdef->sq); - #else - q = xQueueCreate(qdef->depth, qdef->item_sz); - #endif - #if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) - vQueueAddToRegistry(q, "tinyUSB"); - #endif + +#if configSUPPORT_STATIC_ALLOCATION + q = xQueueCreateStatic(qdef->depth, qdef->item_sz, (uint8_t*) qdef->buf, &qdef->sq); +#else + q = xQueueCreate(qdef->depth, qdef->item_sz); +#endif + +#if defined(configQUEUE_REGISTRY_SIZE) && (configQUEUE_REGISTRY_SIZE>0) + vQueueAddToRegistry(q, qdef->name); +#endif + return q; } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_receive(osal_queue_t qhdl, void* data, uint32_t msec) { return xQueueReceive(qhdl, data, _osal_ms2tick(msec)); } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const * data, bool in_isr) -{ - if ( !in_isr ) - { +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void const *data, bool in_isr) { + if ( !in_isr ) { return xQueueSendToBack(qhdl, data, OSAL_TIMEOUT_WAIT_FOREVER) != 0; - } - else - { + } else { BaseType_t xHigherPriorityTaskWoken = pdFALSE; BaseType_t res = xQueueSendToBackFromISR(qhdl, data, &xHigherPriorityTaskWoken); #if CFG_TUSB_MCU == OPT_MCU_ESP32S2 || CFG_TUSB_MCU == OPT_MCU_ESP32S3 - // not needed after https://github.com/espressif/esp-idf/commit/c5fd79547ac9b7bae06fa660e9f814d18d3390b7 + // not needed after https://github.com/espressif/esp-idf/commit/c5fd79547ac9b7bae06fa660e9f814d18d3390b7 (IDF v5) if ( xHigherPriorityTaskWoken ) portYIELD_FROM_ISR(); #else portYIELD_FROM_ISR(xHigherPriorityTaskWoken); @@ -208,13 +203,12 @@ TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_send(osal_queue_t qhdl, void } } -TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) -{ +TU_ATTR_ALWAYS_INLINE static inline bool osal_queue_empty(osal_queue_t qhdl) { return uxQueueMessagesWaiting(qhdl) == 0; } #ifdef __cplusplus - } +} #endif #endif -- cgit v1.3.1 From a160da1f2b941741234f429417798b8df5c33294 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 17:19:47 +0700 Subject: add lpc43 family --- .github/workflows/cmake_arm.yml | 2 +- examples/device/hid_boot_interface/src/main.c | 2 +- examples/typec/power_delivery/src/main.c | 2 +- hw/bsp/board_api.h | 6 +- hw/bsp/ea4357/board.mk | 48 ---- hw/bsp/ea4357/ea4357.c | 301 ---------------------- hw/bsp/ea4357/lpc4357.ld | 324 ------------------------ hw/bsp/ea4357/pca9532.c | 352 -------------------------- hw/bsp/ea4357/pca9532.h | 94 ------- hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h | 165 ++++++++++++ hw/bsp/lpc43/boards/ea4357/board.cmake | 16 ++ hw/bsp/lpc43/boards/ea4357/board.h | 40 +++ hw/bsp/lpc43/boards/ea4357/board.mk | 11 + hw/bsp/lpc43/boards/ea4357/lpc4357.ld | 324 ++++++++++++++++++++++++ hw/bsp/lpc43/boards/ea4357/pca9532.c | 352 ++++++++++++++++++++++++++ hw/bsp/lpc43/boards/ea4357/pca9532.h | 94 +++++++ hw/bsp/lpc43/family.c | 312 +++++++++++++++++++++++ hw/bsp/lpc43/family.cmake | 97 +++++++ hw/bsp/lpc43/family.mk | 34 +++ src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h | 9 + 20 files changed, 1462 insertions(+), 1123 deletions(-) delete mode 100644 hw/bsp/ea4357/board.mk delete mode 100644 hw/bsp/ea4357/ea4357.c delete mode 100644 hw/bsp/ea4357/lpc4357.ld delete mode 100644 hw/bsp/ea4357/pca9532.c delete mode 100644 hw/bsp/ea4357/pca9532.h create mode 100644 hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/lpc43/boards/ea4357/board.cmake create mode 100644 hw/bsp/lpc43/boards/ea4357/board.h create mode 100644 hw/bsp/lpc43/boards/ea4357/board.mk create mode 100644 hw/bsp/lpc43/boards/ea4357/lpc4357.ld create mode 100644 hw/bsp/lpc43/boards/ea4357/pca9532.c create mode 100644 hw/bsp/lpc43/boards/ea4357/pca9532.h create mode 100644 hw/bsp/lpc43/family.c create mode 100644 hw/bsp/lpc43/family.cmake create mode 100644 hw/bsp/lpc43/family.mk (limited to 'src') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 276360650..5203337ec 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -35,7 +35,7 @@ jobs: # Alphabetical order - 'imxrt' - 'kinetis_kl' - - 'lpc18 lpc40' + - 'lpc18 lpc40 lpc43' - 'lpc55' - 'mcx' - 'ra' diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 1a155996a..18f301ff0 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index 08590aa74..489d01aa1 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index a7f3826d1..7249f618d 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -112,10 +112,14 @@ static inline void board_led_off(void) { static inline void board_delay(uint32_t ms) { uint32_t start_ms = board_millis(); while ( board_millis() - start_ms < ms ) { - #if CFG_TUD_ENABLED // take chance to run usb background + #if CFG_TUD_ENABLED tud_task(); #endif + + #if CFG_TUH_ENABLED + tuh_task(); + #endif } } diff --git a/hw/bsp/ea4357/board.mk b/hw/bsp/ea4357/board.mk deleted file mode 100644 index 6fd229166..000000000 --- a/hw/bsp/ea4357/board.mk +++ /dev/null @@ -1,48 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib \ - -DCORE_M4 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC43XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc4357.ld - -SRC_C += \ - src/portable/chipidea/ci_hs/dcd_ci_hs.c \ - src/portable/chipidea/ci_hs/hcd_ci_hs.c \ - src/portable/ehci/ehci.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/i2c_18xx_43xx.c \ - $(MCU_DIR)/src/i2cm_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c \ - $(MCU_DIR)/src/fpu_init.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_43xx - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = LPC4357_M4 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c deleted file mode 100644 index 06975b8cc..000000000 --- a/hw/bsp/ea4357/ea4357.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board_api.h" -#include "pca9532.h" - -#define UART_DEV LPC_USART0 -#define UART_PORT 0x0f -#define UART_PIN_TX 10 -#define UART_PIN_RX 11 - -// P9_1 joystick down -#define BUTTON_PORT 4 -#define BUTTON_PIN 13 - -//static const struct { -// uint8_t mux_port; -// uint8_t mux_pin; -// -// uint8_t gpio_port; -// uint8_t gpio_pin; -//}buttons[] = -//{ -// {0x0a, 3, 4, 10 }, // Joystick up -// {0x09, 1, 4, 13 }, // Joystick down -// {0x0a, 2, 4, 9 }, // Joystick left -// {0x09, 0, 4, 12 }, // Joystick right -// {0x0a, 1, 4, 8 }, // Joystick press -// {0x02, 7, 0, 7 }, // SW6 -//}; - -#ifdef BOARD_TUD_RHPORT - #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) -#else - #define PORT_SUPPORT_DEVICE(_n) 0 -#endif - -#ifdef BOARD_TUH_RHPORT - #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) -#else - #define PORT_SUPPORT_HOST(_n) 0 -#endif - -/*------------------------------------------------------------------*/ -/* BOARD API - *------------------------------------------------------------------*/ - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -static const PINMUX_GRP_T pinmuxing[] = -{ - // Button ( Joystick down ) - {0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)}, - - // UART - {UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC1}, - {UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1}, - - // USB -}; - -/* Pin clock mux values, re-used structure, value in first index is meaningless */ -static const PINMUX_GRP_T pinclockmuxing[] = -{ - {0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - /* Setup system level pin muxing */ - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* Clock pins only, group field not used */ - for (int i = 0; i <(int) (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) - { - Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); - } - - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED via pca9532 I2C - Chip_SCU_I2C0PinConfig(I2C0_STANDARD_FAST_MODE); - Chip_I2C_Init(I2C0); - Chip_I2C_SetClockRate(I2C0, 100000); - Chip_I2C_SetMasterEventHandler(I2C0, Chip_I2C_EventHandlerPolling); - - pca9532_init(); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - //------------- UART -------------// - Chip_UART_Init(UART_DEV); - Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); - Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); - Chip_UART_TXEnable(UART_DEV); - - //------------- USB -------------// - enum { - USBMODE_DEVICE = 2, - USBMODE_HOST = 3 - }; - - enum { - USBMODE_VBUS_LOW = 0, - USBMODE_VBUS_HIGH = 1 - }; - - /* From EA4357 user manual - * - * USB0 Device operation: - * - Insert jumpers in position 1-2 in JP17/JP18/JP19. - * - GPIO28 controls USB connect functionality - * - LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted by default. - * - LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS - * sensing. - * - * USB0 Host operation: - * - insert jumpers in position 2-3 in JP17/JP18/JP19. - * - USB Host power is controlled via distribution switch U20 (found in schematic page 11). - * - Signal GPIO26 is active low and enables +5V on VBUS2. - * - LED35 light whenever +5V is present on VBUS2. - * - GPIO55 is connected to status feedback from the distribution switch. - * - GPIO54 is used for VBUS sensing. 15Kohm pull-down resistors are always active - * - * Note: - * - Insert jumpers in position 2-3 in JP17/JP18/JP19 - * - Insert jumpers in JP31 (OTG) - */ -#if PORT_SUPPORT_DEVICE(0) || PORT_SUPPORT_HOST(0) - Chip_USB0_Init(); -#endif - - /* From EA4357 user manual - * - * For USB1 Device: - * - a 1.5Kohm pull-up resistor is needed on the USB DP data signal. There are two methods to create this. - * JP15 is inserted and the pull-up resistor is always enabled. Alternatively, the pull-up resistor is activated - * inside the USB OTG chip (U31), and this has to be done via the I2C interface of GPIO52/GPIO53. In the latter case, - * JP15 shall not be inserted. - * - J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for - * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status - * of VBUS can be read via U31. - * - JP16 shall not be inserted. - * - * For USB1 Host: - * - 15Kohm pull-down resistors are needed on the USB data signals. These are activated inside the USB OTG chip (U31), - * and this has to be done via the I2C interface of GPIO52/GPIO53. - * - J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB - * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default - * since SJ5 is normally connected between pin 1-2. - * - LED34 lights green when +5V is available on J20. - * - JP15 shall not be inserted. JP16 has no effect - */ -#if PORT_SUPPORT_DEVICE(1) || PORT_SUPPORT_HOST(1) - Chip_USB1_Init(); -#endif - - // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) - Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); - - #if PORT_SUPPORT_DEVICE(0) - // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. - Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); - #endif - - // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required - // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(0) - tud_int_handler(0); - #endif - - #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0); - #endif -} - -void USB1_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(1) - tud_int_handler(1); - #endif - - #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - if (state) - { - pca9532_setLeds( LED1, 0 ); - }else - { - pca9532_setLeds( 0, LED1); - } -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - return Chip_UART_Read(UART_DEV, buf, len); -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; i MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlashA512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2*) - *(.data.$RamLoc40*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc40 AT>MFlashA512 - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>MFlashA512 - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4*) - *(.data.$RamAHB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>MFlashA512 - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5*) - *(.data.$RamAHB_ETB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamLoc40*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4*) - *(.bss.$RamAHB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5*) - *(.bss.$RamAHB_ETB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamLoc40*) - . = ALIGN(4) ; - } > RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM4*) - *(.noinit.$RamAHB16*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM5*) - *(.noinit.$RamAHB_ETB16*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/ea4357/pca9532.c b/hw/bsp/ea4357/pca9532.c deleted file mode 100644 index 150167cde..000000000 --- a/hw/bsp/ea4357/pca9532.c +++ /dev/null @@ -1,352 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - -/* - * NOTE: I2C must have been initialized before calling any functions in this - * file. - */ - -/****************************************************************************** - * Includes - *****************************************************************************/ - -//#include "board.h" -#include "chip.h" - -#include "pca9532.h" - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - -#define I2C_PORT (LPC_I2C0) - -#define LS_MODE_ON 0x01 -#define LS_MODE_BLINK0 0x02 -#define LS_MODE_BLINK1 0x03 - -/****************************************************************************** - * External global variables - *****************************************************************************/ - - -/****************************************************************************** - * Local variables - *****************************************************************************/ - -static uint16_t blink0Shadow = 0; -static uint16_t blink1Shadow = 0; -static uint16_t ledStateShadow = 0; - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2CM_XFER_T i2cData; - - i2cData.slaveAddr = addr; - i2cData.options = 0; - i2cData.status = 0; - i2cData.txBuff = buf; - i2cData.txSz = len; - i2cData.rxBuff = NULL; - i2cData.rxSz = 0; - - if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { - return ERROR; - } - return SUCCESS; -} - -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2CM_XFER_T i2cData; - - i2cData.slaveAddr = addr; - i2cData.options = 0; - i2cData.status = 0; - i2cData.txBuff = NULL; - i2cData.txSz = 0; - i2cData.rxBuff = buf; - i2cData.rxSz = len; - - if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { - return ERROR; - } - return SUCCESS; -} - -static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode) -{ -#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 ) - - int i = 0; - - for (i = 0; i < 4; i++) { - - ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0) - | (IS_LED_SET(0x0002, states)*mode << 2) - | (IS_LED_SET(0x0004, states)*mode << 4) - | (IS_LED_SET(0x0008, states)*mode << 6) ); - - states >>= 4; - } -} - -static void setLeds(void) -{ - uint8_t buf[5]; - uint8_t ls[4] = {0,0,0,0}; - uint16_t states = ledStateShadow; - - /* LEDs in On/Off state */ - setLsStates(states, ls, LS_MODE_ON); - - /* set the LEDs that should blink */ - setLsStates(blink0Shadow, ls, LS_MODE_BLINK0); - setLsStates(blink1Shadow, ls, LS_MODE_BLINK1); - - - buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC; - buf[1] = ls[0]; - buf[2] = ls[1]; - buf[3] = ls[2]; - buf[4] = ls[3]; - I2CWrite(PCA9532_I2C_ADDR, buf, 5); -} - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - -/****************************************************************************** - * - * Description: - * Initialize the PCA9532 Device - * - *****************************************************************************/ -void pca9532_init (void) -{ - /* nothing to initialize */ -} - -/****************************************************************************** - * - * Description: - * Get the LED states - * - * Params: - * [in] shadow - TRUE if the states should be retrieved from the shadow - * variables. The shadow variable are updated when any - * of setLeds, setBlink0Leds and/or setBlink1Leds are - * called. - * - * FALSE if the state should be retrieved from the PCA9532 - * device. A blinkin LED may be reported as on or off - * depending on the state when calling the function. - * - * Returns: - * A mask where a 1 indicates that a LED is on (or blinking). - * - *****************************************************************************/ -uint16_t pca9532_getLedState (uint32_t shadow) -{ - uint8_t buf[2]; - uint16_t ret = 0; - - if (shadow) { - /* a blink LED is reported as on*/ - ret = (ledStateShadow | blink0Shadow | blink1Shadow); - } - else { - - /* - * A blinking LED may be reported as on or off depending on - * its state when reading the Input register. - */ - - buf[0] = PCA9532_INPUT0; - I2CWrite(PCA9532_I2C_ADDR, buf, 1); - - I2CRead(PCA9532_I2C_ADDR, buf, 1); - ret = buf[0]; - - - buf[0] = PCA9532_INPUT1; - I2CWrite(PCA9532_I2C_ADDR, buf, 1); - - I2CRead(PCA9532_I2C_ADDR, buf, 1); - ret |= (buf[0] << 8); - - - /* invert since LEDs are active low */ - ret = ((~ret) & 0xFFFF); - } - - return (ret & ~PCA9532_NOT_USED); -} - - -/****************************************************************************** - * - * Description: - * Set LED states (on or off). - * - * Params: - * [in] ledOnMask - The LEDs that should be turned on. This mask has - * priority over ledOffMask - * [in] ledOffMask - The LEDs that should be turned off. - * - *****************************************************************************/ -void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask) -{ - /* turn off leds */ - ledStateShadow &= (~(ledOffMask) & 0xffff); - - /* ledOnMask has priority over ledOffMask */ - ledStateShadow |= ledOnMask; - - /* turn off blinking */ - blink0Shadow &= (~(ledOffMask) & 0xffff); - blink1Shadow &= (~(ledOffMask) & 0xffff); - - setLeds(); -} - -/****************************************************************************** - * - * Description: - * Set the blink period for PWM0. Valid values are 0 - 255 where 0 - * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. - * - * Params: - * [in] period - the period for pwm0 - * - *****************************************************************************/ -void pca9532_setBlink0Period(uint8_t period) -{ - uint8_t buf[2]; - - buf[0] = PCA9532_PSC0; - buf[1] = period; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED - * is on 25% of the period. - * - * Params: - * [in] duty - duty cycle - * - *****************************************************************************/ -void pca9532_setBlink0Duty(uint8_t duty) -{ - uint8_t buf[2]; - uint32_t tmp = duty; - if (tmp > 100) { - tmp = 100; - } - - tmp = (256 * tmp)/100; - - buf[0] = PCA9532_PWM0; - buf[1] = tmp; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the LEDs that should blink with rate and duty cycle from PWM0. - * Blinking is turned off with pca9532_setLeds. - * - * Params: - * [in] ledMask - LEDs that should blink. - * - *****************************************************************************/ -void pca9532_setBlink0Leds(uint16_t ledMask) -{ - blink0Shadow |= ledMask; - setLeds(); -} - -/****************************************************************************** - * - * Description: - * Set the blink period for PWM1. Valid values are 0 - 255 where 0 - * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. - * - * Params: - * [in] period - The period for PWM1 - * - *****************************************************************************/ -void pca9532_setBlink1Period(uint8_t period) -{ - uint8_t buf[2]; - - buf[0] = PCA9532_PSC1; - buf[1] = period; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED - * is on 25% of the period. - * - * Params: - * [in] duty - duty cycle. - * - *****************************************************************************/ -void pca9532_setBlink1Duty(uint8_t duty) -{ - uint8_t buf[2]; - - uint32_t tmp = duty; - if (tmp > 100) { - tmp = 100; - } - - tmp = (256 * tmp)/100; - - buf[0] = PCA9532_PWM1; - buf[1] = tmp; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the LEDs that should blink with rate and duty cycle from PWM1. - * Blinking is turned off with pca9532_setLeds. - * - * Params: - * [in] ledMask - LEDs that should blink. - * - *****************************************************************************/ -void pca9532_setBlink1Leds(uint16_t ledMask) -{ - blink1Shadow |= ledMask; - setLeds(); -} diff --git a/hw/bsp/ea4357/pca9532.h b/hw/bsp/ea4357/pca9532.h deleted file mode 100644 index f21c1ff09..000000000 --- a/hw/bsp/ea4357/pca9532.h +++ /dev/null @@ -1,94 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __PCA9532C_H -#define __PCA9532C_H - - -#define PCA9532_I2C_ADDR (0xC0>>1) - -#define PCA9532_INPUT0 0x00 -#define PCA9532_INPUT1 0x01 -#define PCA9532_PSC0 0x02 -#define PCA9532_PWM0 0x03 -#define PCA9532_PSC1 0x04 -#define PCA9532_PWM1 0x05 -#define PCA9532_LS0 0x06 -#define PCA9532_LS1 0x07 -#define PCA9532_LS2 0x08 -#define PCA9532_LS3 0x09 - -#define PCA9532_AUTO_INC 0x10 - - -/* - * The Keys on the base board are mapped to LED0 -> LED3 on - * the PCA9532. - */ - -#define KEY1 0x0001 -#define KEY2 0x0002 -#define KEY3 0x0004 -#define KEY4 0x0008 - -#define KEY_MASK 0x000F - -/* - * MMC Card Detect and MMC Write Protect are mapped to LED4 - * and LED5 on the PCA9532. Please note that WP is active low. - */ - -#define MMC_CD 0x0010 -#define MMC_WP 0x0020 - -#define MMC_MASK 0x30 - -/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */ -#define PCA9532_NOT_USED 0xC0 - -/* - * Below are the LED constants to use when enabling/disabling a LED. - * The LED names are the names printed on the base board and not - * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532, - * base_LED2 -> LED9, and so on. - */ - -#define LED1 0x0100 -#define LED2 0x0200 -#define LED3 0x0400 -#define LED4 0x0800 -#define LED5 0x1000 -#define LED6 0x2000 -#define LED7 0x4000 -#define LED8 0x8000 - -#define LED_MASK 0xFF00 - -void pca9532_init (void); -uint16_t pca9532_getLedState (uint32_t shadow); -void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask); -void pca9532_setBlink0Period(uint8_t period); -void pca9532_setBlink0Duty(uint8_t duty); -void pca9532_setBlink0Leds(uint16_t ledMask); -void pca9532_setBlink1Period(uint8_t period); -void pca9532_setBlink1Duty(uint8_t duty); -void pca9532_setBlink1Leds(uint16_t ledMask); - -#endif /* end __PCA9532C_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..6f80413c0 --- /dev/null +++ b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "chip.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< MFlashB512 + + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlashA512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlashA512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlashA512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlashA512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamLoc40 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc40) + *(.data.$RAM2*) + *(.data.$RamLoc40*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamLoc40 AT>MFlashA512 + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamAHB32 AT>MFlashA512 + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4*) + *(.data.$RamAHB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + } > RamAHB16 AT>MFlashA512 + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5*) + *(.data.$RamAHB_ETB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + } > RamAHB_ETB16 AT>MFlashA512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlashA512 + + /* BSS section for RamLoc40 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamLoc40*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamLoc40 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : ALIGN(4) + { + PROVIDE(__start_bss_RAM4 = .) ; + *(.bss.$RAM4*) + *(.bss.$RamAHB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + } > RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : ALIGN(4) + { + PROVIDE(__start_bss_RAM5 = .) ; + *(.bss.$RAM5*) + *(.bss.$RamAHB_ETB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + } > RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamLoc40 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamLoc40*) + . = ALIGN(4) ; + } > RamLoc40 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM4*) + *(.noinit.$RamAHB16*) + . = ALIGN(4) ; + } > RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM5*) + *(.noinit.$RamAHB_ETB16*) + . = ALIGN(4) ; + } > RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc43/boards/ea4357/pca9532.c b/hw/bsp/lpc43/boards/ea4357/pca9532.c new file mode 100644 index 000000000..150167cde --- /dev/null +++ b/hw/bsp/lpc43/boards/ea4357/pca9532.c @@ -0,0 +1,352 @@ +/***************************************************************************** + * + * Copyright(C) 2011, Embedded Artists AB + * All rights reserved. + * + ****************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * Embedded Artists AB assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. Embedded Artists AB + * reserves the right to make changes in the software without + * notification. Embedded Artists AB also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + *****************************************************************************/ + +/* + * NOTE: I2C must have been initialized before calling any functions in this + * file. + */ + +/****************************************************************************** + * Includes + *****************************************************************************/ + +//#include "board.h" +#include "chip.h" + +#include "pca9532.h" + +/****************************************************************************** + * Defines and typedefs + *****************************************************************************/ + +#define I2C_PORT (LPC_I2C0) + +#define LS_MODE_ON 0x01 +#define LS_MODE_BLINK0 0x02 +#define LS_MODE_BLINK1 0x03 + +/****************************************************************************** + * External global variables + *****************************************************************************/ + + +/****************************************************************************** + * Local variables + *****************************************************************************/ + +static uint16_t blink0Shadow = 0; +static uint16_t blink1Shadow = 0; +static uint16_t ledStateShadow = 0; + +/****************************************************************************** + * Local Functions + *****************************************************************************/ + +static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) +{ + I2CM_XFER_T i2cData; + + i2cData.slaveAddr = addr; + i2cData.options = 0; + i2cData.status = 0; + i2cData.txBuff = buf; + i2cData.txSz = len; + i2cData.rxBuff = NULL; + i2cData.rxSz = 0; + + if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { + return ERROR; + } + return SUCCESS; +} + +static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) +{ + I2CM_XFER_T i2cData; + + i2cData.slaveAddr = addr; + i2cData.options = 0; + i2cData.status = 0; + i2cData.txBuff = NULL; + i2cData.txSz = 0; + i2cData.rxBuff = buf; + i2cData.rxSz = len; + + if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { + return ERROR; + } + return SUCCESS; +} + +static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode) +{ +#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 ) + + int i = 0; + + for (i = 0; i < 4; i++) { + + ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0) + | (IS_LED_SET(0x0002, states)*mode << 2) + | (IS_LED_SET(0x0004, states)*mode << 4) + | (IS_LED_SET(0x0008, states)*mode << 6) ); + + states >>= 4; + } +} + +static void setLeds(void) +{ + uint8_t buf[5]; + uint8_t ls[4] = {0,0,0,0}; + uint16_t states = ledStateShadow; + + /* LEDs in On/Off state */ + setLsStates(states, ls, LS_MODE_ON); + + /* set the LEDs that should blink */ + setLsStates(blink0Shadow, ls, LS_MODE_BLINK0); + setLsStates(blink1Shadow, ls, LS_MODE_BLINK1); + + + buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC; + buf[1] = ls[0]; + buf[2] = ls[1]; + buf[3] = ls[2]; + buf[4] = ls[3]; + I2CWrite(PCA9532_I2C_ADDR, buf, 5); +} + +/****************************************************************************** + * Public Functions + *****************************************************************************/ + +/****************************************************************************** + * + * Description: + * Initialize the PCA9532 Device + * + *****************************************************************************/ +void pca9532_init (void) +{ + /* nothing to initialize */ +} + +/****************************************************************************** + * + * Description: + * Get the LED states + * + * Params: + * [in] shadow - TRUE if the states should be retrieved from the shadow + * variables. The shadow variable are updated when any + * of setLeds, setBlink0Leds and/or setBlink1Leds are + * called. + * + * FALSE if the state should be retrieved from the PCA9532 + * device. A blinkin LED may be reported as on or off + * depending on the state when calling the function. + * + * Returns: + * A mask where a 1 indicates that a LED is on (or blinking). + * + *****************************************************************************/ +uint16_t pca9532_getLedState (uint32_t shadow) +{ + uint8_t buf[2]; + uint16_t ret = 0; + + if (shadow) { + /* a blink LED is reported as on*/ + ret = (ledStateShadow | blink0Shadow | blink1Shadow); + } + else { + + /* + * A blinking LED may be reported as on or off depending on + * its state when reading the Input register. + */ + + buf[0] = PCA9532_INPUT0; + I2CWrite(PCA9532_I2C_ADDR, buf, 1); + + I2CRead(PCA9532_I2C_ADDR, buf, 1); + ret = buf[0]; + + + buf[0] = PCA9532_INPUT1; + I2CWrite(PCA9532_I2C_ADDR, buf, 1); + + I2CRead(PCA9532_I2C_ADDR, buf, 1); + ret |= (buf[0] << 8); + + + /* invert since LEDs are active low */ + ret = ((~ret) & 0xFFFF); + } + + return (ret & ~PCA9532_NOT_USED); +} + + +/****************************************************************************** + * + * Description: + * Set LED states (on or off). + * + * Params: + * [in] ledOnMask - The LEDs that should be turned on. This mask has + * priority over ledOffMask + * [in] ledOffMask - The LEDs that should be turned off. + * + *****************************************************************************/ +void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask) +{ + /* turn off leds */ + ledStateShadow &= (~(ledOffMask) & 0xffff); + + /* ledOnMask has priority over ledOffMask */ + ledStateShadow |= ledOnMask; + + /* turn off blinking */ + blink0Shadow &= (~(ledOffMask) & 0xffff); + blink1Shadow &= (~(ledOffMask) & 0xffff); + + setLeds(); +} + +/****************************************************************************** + * + * Description: + * Set the blink period for PWM0. Valid values are 0 - 255 where 0 + * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. + * + * Params: + * [in] period - the period for pwm0 + * + *****************************************************************************/ +void pca9532_setBlink0Period(uint8_t period) +{ + uint8_t buf[2]; + + buf[0] = PCA9532_PSC0; + buf[1] = period; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED + * is on 25% of the period. + * + * Params: + * [in] duty - duty cycle + * + *****************************************************************************/ +void pca9532_setBlink0Duty(uint8_t duty) +{ + uint8_t buf[2]; + uint32_t tmp = duty; + if (tmp > 100) { + tmp = 100; + } + + tmp = (256 * tmp)/100; + + buf[0] = PCA9532_PWM0; + buf[1] = tmp; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the LEDs that should blink with rate and duty cycle from PWM0. + * Blinking is turned off with pca9532_setLeds. + * + * Params: + * [in] ledMask - LEDs that should blink. + * + *****************************************************************************/ +void pca9532_setBlink0Leds(uint16_t ledMask) +{ + blink0Shadow |= ledMask; + setLeds(); +} + +/****************************************************************************** + * + * Description: + * Set the blink period for PWM1. Valid values are 0 - 255 where 0 + * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. + * + * Params: + * [in] period - The period for PWM1 + * + *****************************************************************************/ +void pca9532_setBlink1Period(uint8_t period) +{ + uint8_t buf[2]; + + buf[0] = PCA9532_PSC1; + buf[1] = period; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED + * is on 25% of the period. + * + * Params: + * [in] duty - duty cycle. + * + *****************************************************************************/ +void pca9532_setBlink1Duty(uint8_t duty) +{ + uint8_t buf[2]; + + uint32_t tmp = duty; + if (tmp > 100) { + tmp = 100; + } + + tmp = (256 * tmp)/100; + + buf[0] = PCA9532_PWM1; + buf[1] = tmp; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the LEDs that should blink with rate and duty cycle from PWM1. + * Blinking is turned off with pca9532_setLeds. + * + * Params: + * [in] ledMask - LEDs that should blink. + * + *****************************************************************************/ +void pca9532_setBlink1Leds(uint16_t ledMask) +{ + blink1Shadow |= ledMask; + setLeds(); +} diff --git a/hw/bsp/lpc43/boards/ea4357/pca9532.h b/hw/bsp/lpc43/boards/ea4357/pca9532.h new file mode 100644 index 000000000..f21c1ff09 --- /dev/null +++ b/hw/bsp/lpc43/boards/ea4357/pca9532.h @@ -0,0 +1,94 @@ +/***************************************************************************** + * + * Copyright(C) 2011, Embedded Artists AB + * All rights reserved. + * + ****************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * Embedded Artists AB assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. Embedded Artists AB + * reserves the right to make changes in the software without + * notification. Embedded Artists AB also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + *****************************************************************************/ +#ifndef __PCA9532C_H +#define __PCA9532C_H + + +#define PCA9532_I2C_ADDR (0xC0>>1) + +#define PCA9532_INPUT0 0x00 +#define PCA9532_INPUT1 0x01 +#define PCA9532_PSC0 0x02 +#define PCA9532_PWM0 0x03 +#define PCA9532_PSC1 0x04 +#define PCA9532_PWM1 0x05 +#define PCA9532_LS0 0x06 +#define PCA9532_LS1 0x07 +#define PCA9532_LS2 0x08 +#define PCA9532_LS3 0x09 + +#define PCA9532_AUTO_INC 0x10 + + +/* + * The Keys on the base board are mapped to LED0 -> LED3 on + * the PCA9532. + */ + +#define KEY1 0x0001 +#define KEY2 0x0002 +#define KEY3 0x0004 +#define KEY4 0x0008 + +#define KEY_MASK 0x000F + +/* + * MMC Card Detect and MMC Write Protect are mapped to LED4 + * and LED5 on the PCA9532. Please note that WP is active low. + */ + +#define MMC_CD 0x0010 +#define MMC_WP 0x0020 + +#define MMC_MASK 0x30 + +/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */ +#define PCA9532_NOT_USED 0xC0 + +/* + * Below are the LED constants to use when enabling/disabling a LED. + * The LED names are the names printed on the base board and not + * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532, + * base_LED2 -> LED9, and so on. + */ + +#define LED1 0x0100 +#define LED2 0x0200 +#define LED3 0x0400 +#define LED4 0x0800 +#define LED5 0x1000 +#define LED6 0x2000 +#define LED7 0x4000 +#define LED8 0x8000 + +#define LED_MASK 0xFF00 + +void pca9532_init (void); +uint16_t pca9532_getLedState (uint32_t shadow); +void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask); +void pca9532_setBlink0Period(uint8_t period); +void pca9532_setBlink0Duty(uint8_t duty); +void pca9532_setBlink0Leds(uint16_t ledMask); +void pca9532_setBlink1Period(uint8_t period); +void pca9532_setBlink1Duty(uint8_t duty); +void pca9532_setBlink1Leds(uint16_t ledMask); + +#endif /* end __PCA9532C_H */ +/**************************************************************************** +** End Of File +*****************************************************************************/ diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c new file mode 100644 index 000000000..ba3191d5f --- /dev/null +++ b/hw/bsp/lpc43/family.c @@ -0,0 +1,312 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + +#include "chip.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + +#define UART_DEV LPC_USART0 +#define UART_PORT 0x0f +#define UART_PIN_TX 10 +#define UART_PIN_RX 11 + +// P9_1 joystick down +#define BUTTON_PORT 4 +#define BUTTON_PIN 13 + +//static const struct { +// uint8_t mux_port; +// uint8_t mux_pin; +// +// uint8_t gpio_port; +// uint8_t gpio_pin; +//}buttons[] = +//{ +// {0x0a, 3, 4, 10 }, // Joystick up +// {0x09, 1, 4, 13 }, // Joystick down +// {0x0a, 2, 4, 9 }, // Joystick left +// {0x09, 0, 4, 12 }, // Joystick right +// {0x0a, 1, 4, 8 }, // Joystick press +// {0x02, 7, 0, 7 }, // SW6 +//}; + +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + +/*------------------------------------------------------------------*/ +/* BOARD API + *------------------------------------------------------------------*/ + +/* System configuration variables used by chip driver */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +static const PINMUX_GRP_T pinmuxing[] = +{ + // Button ( Joystick down ) + {0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)}, + + // UART + {UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC1}, + {UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1}, + + // USB +}; + +/* Pin clock mux values, re-used structure, value in first index is meaningless */ +static const PINMUX_GRP_T pinclockmuxing[] = +{ + {0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; + +#if __FPU_USED == 1 + fpuInit(); +#endif +#endif // __USE_LPCOPEN + + /* Setup system level pin muxing */ + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + /* Clock pins only, group field not used */ + for (int i = 0; i <(int) (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) + { + Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); + } + + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED via pca9532 I2C + Chip_SCU_I2C0PinConfig(I2C0_STANDARD_FAST_MODE); + Chip_I2C_Init(I2C0); + Chip_I2C_SetClockRate(I2C0, 100000); + Chip_I2C_SetMasterEventHandler(I2C0, Chip_I2C_EventHandlerPolling); + + pca9532_init(); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + + //------------- UART -------------// + Chip_UART_Init(UART_DEV); + Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); + Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); + Chip_UART_TXEnable(UART_DEV); + + //------------- USB -------------// + enum { + USBMODE_DEVICE = 2, + USBMODE_HOST = 3 + }; + + enum { + USBMODE_VBUS_LOW = 0, + USBMODE_VBUS_HIGH = 1 + }; + + /* From EA4357 user manual + * + * USB0 Device operation: + * - Insert jumpers in position 1-2 in JP17/JP18/JP19. + * - GPIO28 controls USB connect functionality + * - LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted by default. + * - LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS + * sensing. + * + * USB0 Host operation: + * - insert jumpers in position 2-3 in JP17/JP18/JP19. + * - USB Host power is controlled via distribution switch U20 (found in schematic page 11). + * - Signal GPIO26 is active low and enables +5V on VBUS2. + * - LED35 light whenever +5V is present on VBUS2. + * - GPIO55 is connected to status feedback from the distribution switch. + * - GPIO54 is used for VBUS sensing. 15Kohm pull-down resistors are always active + * + * Note: + * - Insert jumpers in position 2-3 in JP17/JP18/JP19 + * - Insert jumpers in JP31 (OTG) + */ +#if PORT_SUPPORT_DEVICE(0) || PORT_SUPPORT_HOST(0) + Chip_USB0_Init(); +#endif + + /* From EA4357 user manual + * + * For USB1 Device: + * - a 1.5Kohm pull-up resistor is needed on the USB DP data signal. There are two methods to create this. + * JP15 is inserted and the pull-up resistor is always enabled. Alternatively, the pull-up resistor is activated + * inside the USB OTG chip (U31), and this has to be done via the I2C interface of GPIO52/GPIO53. In the latter case, + * JP15 shall not be inserted. + * - J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for + * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status + * of VBUS can be read via U31. + * - JP16 shall not be inserted. + * + * For USB1 Host: + * - 15Kohm pull-down resistors are needed on the USB data signals. These are activated inside the USB OTG chip (U31), + * and this has to be done via the I2C interface of GPIO52/GPIO53. + * - J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB + * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default + * since SJ5 is normally connected between pin 1-2. + * - LED34 lights green when +5V is available on J20. + * - JP15 shall not be inserted. JP16 has no effect + */ +#if PORT_SUPPORT_DEVICE(1) || PORT_SUPPORT_HOST(1) + Chip_USB1_Init(); +#endif + + // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) + Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); + + #if PORT_SUPPORT_DEVICE(0) + // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. + Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); + #endif + + // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required + // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); + #endif + + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); + #endif + + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if (state) + { + pca9532_setLeds( LED1, 0 ); + }else + { + pca9532_setLeds( 0, LED1); + } +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + return Chip_UART_Read(UART_DEV, buf, len); +} + +int board_uart_write(void const * buf, int len) +{ + uint8_t const* buf8 = (uint8_t const*) buf; + for(int i=0; i Date: Tue, 18 Jul 2023 14:23:41 +0200 Subject: clean(ra_hcd): fix typos in the hcd library --- src/portable/renesas/rusb2/hcd_rusb2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'src') diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 55bf6de4d..790cd6b32 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -265,7 +265,7 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BCLR_Msk; + rusb->D0FIFOCTR = RUSB2_D0FIFOCTR_BCLR_Msk; } rusb->D0FIFOSEL = 0; while (rusb->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ @@ -297,7 +297,7 @@ static bool pipe_xfer_out(rusb2_reg_t* rusb, unsigned num) pipe->buf = (uint8_t*)buf + len; } if (len < mps) { - rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->D0FIFOCTR = RUSB2_D0FIFOCTR_BVAL_Msk; } rusb->D0FIFOSEL = 0; while (rusb->D0FIFOSEL_b.CURPIPE) ; /* if CURPIPE bits changes, check written value */ @@ -367,7 +367,7 @@ static bool process_pipe_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, } else { /* ZLP */ rusb->D0FIFOSEL = num; pipe_wait_for_ready(rusb, num); - rusb->D0FIFOCTR = RUSB2_CFIFOCTR_BVAL_Msk; + rusb->D0FIFOCTR = RUSB2_D0FIFOCTR_BVAL_Msk; rusb->D0FIFOSEL = 0; while (rusb->D0FIFOSEL_b.CURPIPE) {} /* if CURPIPE bits changes, check written value */ } -- cgit v1.3.1 From 1f95a417f271e627ec981be3d211eed8c37cb052 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 7 Aug 2023 18:22:28 +0700 Subject: Add tuh_rhport_is_active() and tuh_rhport_reset_bus() - also improve ehci bus reset - seperate bus reset delay and contact debouncing delay in enumeration --- src/host/hcd.h | 5 +- src/host/hub.c | 2 +- src/host/usbh.c | 118 +++++++++++++++++--------------- src/host/usbh.h | 39 ++++++----- src/portable/chipidea/ci_hs/hcd_ci_hs.c | 43 ++++++------ src/portable/ehci/ehci.c | 24 +++++-- 6 files changed, 128 insertions(+), 103 deletions(-) (limited to 'src') diff --git a/src/host/hcd.h b/src/host/hcd.h index d77dd6e2f..9bcc1c6df 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -149,10 +149,11 @@ uint32_t hcd_frame_number(uint8_t rhport); // Get the current connect status of roothub port bool hcd_port_connect_status(uint8_t rhport); -// Reset USB bus on the port +// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. +// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. void hcd_port_reset(uint8_t rhport); -// TODO implement later +// Complete bus reset sequence, may be required by some controllers void hcd_port_reset_end(uint8_t rhport); // Get port link speed diff --git a/src/host/hub.c b/src/host/hub.c index 16dd534d2..ec30eb96a 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -330,7 +330,7 @@ static void connection_port_reset_complete (tuh_xfer_t* xfer); bool hub_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) xferred_bytes; // TODO can be more than 1 for hub with lots of ports (void) ep_addr; - TU_ASSERT(result == XFER_RESULT_SUCCESS); + TU_VERIFY(result == XFER_RESULT_SUCCESS); hub_interface_t* p_hub = get_itf(dev_addr); diff --git a/src/host/usbh.c b/src/host/usbh.c index 49f8c78f1..cc7e38b45 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -181,9 +181,6 @@ static usbh_class_driver_t const usbh_class_drivers[] = }; enum { USBH_CLASS_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; - -enum { RESET_DELAY = 500 }; // 200 USB specs say only 50ms but many devices require much longer - enum { CONFIG_NUM = 1 }; // default to use configuration 1 @@ -251,40 +248,27 @@ static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t #if CFG_TUSB_OS == OPT_OS_NONE // TODO rework time-related function later -TU_ATTR_WEAK void osal_task_delay(uint32_t msec) -{ +// weak and overridable +TU_ATTR_WEAK void osal_task_delay(uint32_t msec) { const uint32_t start = hcd_frame_number(_usbh_controller); while ( ( hcd_frame_number(_usbh_controller) - start ) < msec ) {} } #endif //--------------------------------------------------------------------+ -// PUBLIC API (Parameter Verification is required) +// Device API //--------------------------------------------------------------------+ -bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) -{ - if (hcd_configure) - { - return hcd_configure(rhport, cfg_id, cfg_param); - }else - { - return false; - } -} - -bool tuh_mounted(uint8_t dev_addr) -{ - usbh_device_t* dev = get_device(dev_addr); +bool tuh_mounted(uint8_t dev_addr) { + usbh_device_t *dev = get_device(dev_addr); TU_VERIFY(dev); return dev->configured; } -bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t* vid, uint16_t* pid) -{ +bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t *vid, uint16_t *pid) { *vid = *pid = 0; - usbh_device_t const* dev = get_device(dev_addr); + usbh_device_t const *dev = get_device(dev_addr); TU_VERIFY(dev && dev->addressed && dev->vid != 0); *vid = dev->vid; @@ -293,26 +277,48 @@ bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t* vid, uint16_t* pid) return true; } -tusb_speed_t tuh_speed_get (uint8_t dev_addr) -{ - usbh_device_t* dev = get_device(dev_addr); +tusb_speed_t tuh_speed_get(uint8_t dev_addr) { + usbh_device_t *dev = get_device(dev_addr); return (tusb_speed_t) (dev ? get_device(dev_addr)->speed : _dev0.speed); } -static void clear_device(usbh_device_t* dev) -{ +bool tuh_rhport_is_active(uint8_t rhport) { + return _usbh_controller == rhport; +} + +bool tuh_rhport_reset_bus(uint8_t rhport, bool active) { + TU_VERIFY(tuh_rhport_is_active(rhport)); + if ( active ) { + hcd_port_reset(rhport); + } else { + hcd_port_reset_end(rhport); + } + return true; +} + +//--------------------------------------------------------------------+ +// PUBLIC API (Parameter Verification is required) +//--------------------------------------------------------------------+ + +bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { + if ( hcd_configure ) { + return hcd_configure(rhport, cfg_id, cfg_param); + } else { + return false; + } +} + +static void clear_device(usbh_device_t* dev) { tu_memclr(dev, sizeof(usbh_device_t)); memset(dev->itf2drv, TUSB_INDEX_INVALID_8, sizeof(dev->itf2drv)); // invalid mapping memset(dev->ep2drv , TUSB_INDEX_INVALID_8, sizeof(dev->ep2drv )); // invalid mapping } -bool tuh_inited(void) -{ +bool tuh_inited(void) { return _usbh_controller != TUSB_INDEX_INVALID_8; } -bool tuh_init(uint8_t controller_id) -{ +bool tuh_init(uint8_t controller_id) { // skip if already initialized if ( tuh_inited() ) return true; @@ -359,8 +365,7 @@ bool tuh_init(uint8_t controller_id) return true; } -bool tuh_task_event_ready(void) -{ +bool tuh_task_event_ready(void) { // Skip if stack is not initialized if ( !tuh_inited() ) return false; @@ -385,8 +390,7 @@ bool tuh_task_event_ready(void) } @endcode */ -void tuh_task_ext(uint32_t timeout_ms, bool in_isr) -{ +void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { (void) in_isr; // not implemented yet // Skip if stack is not initialized @@ -403,8 +407,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) case HCD_EVENT_DEVICE_ATTACH: // due to the shared _usbh_ctrl_buf, we must complete enumerating // one device before enumerating another one. - if ( _dev0.enumerating ) - { + if ( _dev0.enumerating ) { TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); bool is_empty = osal_queue_empty(_usbh_q); @@ -414,8 +417,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) // Exit if this is the only event in the queue, otherwise we may loop forever return; } - }else - { + }else { TU_LOG_USBH("[%u:] USBH DEVICE ATTACH\r\n", event.rhport); _dev0.enumerating = 1; enum_new_device(&event); @@ -428,8 +430,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) #if CFG_TUH_HUB // TODO remove - if ( event.connection.hub_addr != 0) - { + if ( event.connection.hub_addr != 0) { // done with hub, waiting for next data on status pipe (void) hub_edpt_status_xfer( event.connection.hub_addr ); } @@ -1230,6 +1231,12 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu // one device before enumerating another one. //--------------------------------------------------------------------+ +enum { + ENUM_RESET_DELAY = 50, // USB specs: 10 to 50ms + ENUM_CONTACT_DEBOUNCING_DELAY = 450, // when plug/unplug a device, physical connection can be bouncing and may + // generate a series of attach/detach event. This delay wait for stable connection +}; + enum { ENUM_IDLE, ENUM_RESET_1, // 1st reset when attached @@ -1311,7 +1318,7 @@ static void process_enumeration(tuh_xfer_t* xfer) break; case ENUM_HUB_GET_STATUS_2: - osal_task_delay(RESET_DELAY); + osal_task_delay(ENUM_RESET_DELAY); TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, process_enumeration, ENUM_HUB_CLEAR_RESET_2), ); break; @@ -1468,12 +1475,14 @@ static bool enum_new_device(hcd_event_t* event) if (_dev0.hub_addr == 0) { // connected/disconnected directly with roothub - // wait until device is stable TODO non blocking hcd_port_reset(_dev0.rhport); - osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since - // sof of controller may not running while resetting + osal_task_delay(ENUM_RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since + // sof of controller may not running while resetting hcd_port_reset_end( _dev0.rhport); + // wait until device connection is stable TODO non blocking + osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); + // device unplugged while delaying if ( !hcd_port_connect_status(_dev0.rhport) ) { enum_full_complete(); @@ -1489,6 +1498,7 @@ static bool enum_new_device(hcd_event_t* event) xfer.result = XFER_RESULT_SUCCESS; xfer.user_data = ENUM_ADDR0_DEVICE_DESC; + process_enumeration(&xfer); } @@ -1496,8 +1506,8 @@ static bool enum_new_device(hcd_event_t* event) else { // connected/disconnected via external hub - // wait until device is stable - osal_task_delay(RESET_DELAY); + // wait until device connection is stable TODO non blocking + osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); // ENUM_HUB_GET_STATUS //TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, enum_hub_get_status0_complete, 0) ); @@ -1508,23 +1518,19 @@ static bool enum_new_device(hcd_event_t* event) return true; } -static uint8_t get_new_address(bool is_hub) -{ +static uint8_t get_new_address(bool is_hub) { uint8_t start; uint8_t end; - if ( is_hub ) - { + if ( is_hub ) { start = CFG_TUH_DEVICE_MAX; end = start + CFG_TUH_HUB; - }else - { + }else { start = 0; end = start + CFG_TUH_DEVICE_MAX; } - for (uint8_t idx = start; idx < end; idx++) - { + for (uint8_t idx = start; idx < end; idx++) { if (!_usbh_devices[idx].connected) return (idx+1); } diff --git a/src/host/usbh.h b/src/host/usbh.h index 0d56f40c9..684e8240e 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -47,8 +47,7 @@ typedef void (*tuh_xfer_cb_t)(tuh_xfer_t* xfer); // it is advised to initialize it using member name // Note2: not all field is available/meaningful in callback, // some info is not saved by usbh to save SRAM -struct tuh_xfer_s -{ +struct tuh_xfer_s { uint8_t daddr; uint8_t ep_addr; uint8_t TU_RESERVED; // reserved @@ -56,8 +55,7 @@ struct tuh_xfer_s uint32_t actual_len; // excluding setup packet - union - { + union { tusb_control_request_t const* setup; // setup packet pointer if control transfer uint32_t buflen; // expected length if not control transfer (not available in callback) }; @@ -70,15 +68,13 @@ struct tuh_xfer_s }; // Subject to change -typedef struct -{ +typedef struct { uint8_t daddr; tusb_desc_interface_t desc; } tuh_itf_info_t; // ConfigID for tuh_config() -enum -{ +enum { TUH_CFGID_RPI_PIO_USB_CONFIGURATION = OPT_MCU_RP2040 << 8 // cfg_param: pio_usb_configuration_t }; @@ -105,12 +101,12 @@ TU_ATTR_WEAK void tuh_umount_cb(uint8_t daddr); // Should be called before tuh_init() // - cfg_id : configure ID (TBD) // - cfg_param: configure data, structure depends on the ID -bool tuh_configure(uint8_t controller_id, uint32_t cfg_id, const void* cfg_param); +bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Init host stack -bool tuh_init(uint8_t controller_id); +bool tuh_init(uint8_t rhport); -// Check if host stack is already initialized +// Check if host stack is already initialized with any roothub ports bool tuh_inited(void); // Task function should be called in main/rtos loop, extended version of tuh_task() @@ -120,8 +116,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr); // Task function should be called in main/rtos loop TU_ATTR_ALWAYS_INLINE static inline -void tuh_task(void) -{ +void tuh_task(void) { tuh_task_ext(UINT32_MAX, false); } @@ -135,8 +130,20 @@ extern void hcd_int_handler(uint8_t rhport); // Interrupt handler, name alias to HCD #define tuh_int_handler hcd_int_handler +// Check if roothub port is initialized and active as a host +bool tuh_rhport_is_active(uint8_t rhport); + +// Assert/de-assert Bus Reset signal to roothub port. USB specs: it should last 10-50ms +bool tuh_rhport_reset_bus(uint8_t rhport, bool active); + +//--------------------------------------------------------------------+ +// Device API +//--------------------------------------------------------------------+ + +// Get VID/PID of device bool tuh_vid_pid_get(uint8_t daddr, uint16_t* vid, uint16_t* pid); +// Get speed of device tusb_speed_t tuh_speed_get(uint8_t daddr); // Check if device is connected and configured @@ -144,8 +151,7 @@ bool tuh_mounted(uint8_t daddr); // Check if device is suspended TU_ATTR_ALWAYS_INLINE static inline -bool tuh_suspended(uint8_t daddr) -{ +bool tuh_suspended(uint8_t daddr) { // TODO implement suspend & resume on host (void) daddr; return false; @@ -153,8 +159,7 @@ bool tuh_suspended(uint8_t daddr) // Check if device is ready to communicate with TU_ATTR_ALWAYS_INLINE static inline -bool tuh_ready(uint8_t daddr) -{ +bool tuh_ready(uint8_t daddr) { return tuh_mounted(daddr) && !tuh_suspended(daddr); } diff --git a/src/portable/chipidea/ci_hs/hcd_ci_hs.c b/src/portable/chipidea/ci_hs/hcd_ci_hs.c index 6ee91e18e..462cbd301 100644 --- a/src/portable/chipidea/ci_hs/hcd_ci_hs.c +++ b/src/portable/chipidea/ci_hs/hcd_ci_hs.c @@ -39,24 +39,27 @@ #include "ci_hs_type.h" #if CFG_TUSB_MCU == OPT_MCU_MIMXRT1XXX - #include "ci_hs_imxrt.h" - bool hcd_dcache_clean(void const* addr, uint32_t data_size) { - return imxrt_dcache_clean(addr, data_size); - } +#include "ci_hs_imxrt.h" - bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { - return imxrt_dcache_invalidate(addr, data_size); - } +bool hcd_dcache_clean(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean(addr, data_size); +} + +bool hcd_dcache_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_invalidate(addr, data_size); +} - bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { - return imxrt_dcache_clean_invalidate(addr, data_size); - } +bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) { + return imxrt_dcache_clean_invalidate(addr, data_size); +} #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) - #include "ci_hs_lpc18_43.h" + +#include "ci_hs_lpc18_43.h" + #else - #error "Unsupported MCUs" +#error "Unsupported MCUs" #endif //--------------------------------------------------------------------+ @@ -67,25 +70,25 @@ // Controller API //--------------------------------------------------------------------+ -bool hcd_init(uint8_t rhport) -{ - ci_hs_regs_t* hcd_reg = CI_HS_REG(rhport); +bool hcd_init(uint8_t rhport) { + ci_hs_regs_t *hcd_reg = CI_HS_REG(rhport); // Reset controller hcd_reg->USBCMD |= USBCMD_RESET; - while( hcd_reg->USBCMD & USBCMD_RESET ) {} + while ( hcd_reg->USBCMD & USBCMD_RESET ) {} // Set mode to device, must be set immediately after reset #if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX // LPC18XX/43XX need to set VBUS Power Select to HIGH // RHPORT1 is fullspeed only (need external PHY for Highspeed) hcd_reg->USBMODE = USBMODE_CM_HOST | USBMODE_VBUS_POWER_SELECT; - if (rhport == 1) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; + if ( rhport == 1 ) hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; #else hcd_reg->USBMODE = USBMODE_CM_HOST; #endif // FIXME force full speed, still have issue with Highspeed enumeration + // probably due to physical connection bouncing when plug/unplug // 1. Have issue when plug/unplug devices, maybe the port is not reset properly // 2. Also does not seems to detect disconnection hcd_reg->PORTSC1 |= PORTSC1_FORCE_FULL_SPEED; @@ -93,13 +96,11 @@ bool hcd_init(uint8_t rhport) return ehci_init(rhport, (uint32_t) &hcd_reg->CAPLENGTH, (uint32_t) &hcd_reg->USBCMD); } -void hcd_int_enable(uint8_t rhport) -{ +void hcd_int_enable(uint8_t rhport) { CI_HCD_INT_ENABLE(rhport); } -void hcd_int_disable(uint8_t rhport) -{ +void hcd_int_disable(uint8_t rhport) { CI_HCD_INT_DISABLE(rhport); } diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 9be24c888..79811985c 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -188,6 +188,11 @@ void hcd_port_reset(uint8_t rhport) ehci_registers_t* regs = ehci_data.regs; + // skip if already in reset + if (regs->portsc_bm.port_reset) { + return; + } + // mask out Write-1-to-Clear bits uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_W1C; @@ -202,16 +207,18 @@ void hcd_port_reset(uint8_t rhport) void hcd_port_reset_end(uint8_t rhport) { (void) rhport; - -#if 0 // TODO check if this is necessary ehci_registers_t* regs = ehci_data.regs; + // skip if reset is already complete + if (!regs->portsc_bm.port_reset) { + return; + } + // mask out all change bits since they are Write 1 to clear - uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_CHANGE_ALL; - portsc &= ~(EHCI_PORTSC_MASK_PORT_RESET); + uint32_t portsc = regs->portsc & ~EHCI_PORTSC_MASK_W1C; + portsc &= ~EHCI_PORTSC_MASK_PORT_RESET; regs->portsc = portsc; -#endif } bool hcd_port_connect_status(uint8_t rhport) @@ -426,6 +433,11 @@ bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet hcd_dcache_clean(setup_packet, 8); + // Control endpoint never be stalled. Skip reset Data Toggle since it is fixed per stage + if (qhd->qtd_overlay.halted) { + qhd->qtd_overlay.halted = false; + } + // attach TD to QHD -> start transferring qhd_attach_qtd(qhd, td); @@ -662,7 +674,7 @@ void hcd_int_handler(uint8_t rhport) if (int_status & EHCI_INT_MASK_PORT_CHANGE) { // Including: Force port resume, over-current change, enable/disable change and connect status change. uint32_t const port_status = regs->portsc & EHCI_PORTSC_MASK_W1C; - print_portsc(regs); + // print_portsc(regs); if (regs->portsc_bm.connect_status_change) { port_connect_status_change_isr(rhport); -- cgit v1.3.1 From 18646179d0c784660ca261fb675e21787451655b Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 7 Aug 2023 18:23:16 +0700 Subject: fix host msc get maxlun not using aligned section memory --- src/class/msc/msc_host.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) (limited to 'src') diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index a65208d69..90a58d3d0 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -421,8 +421,7 @@ bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *de return true; } -bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) -{ +bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) { msch_interface_t* p_msc = get_itf(dev_addr); TU_ASSERT(p_msc->itf_num == itf_num); @@ -430,10 +429,8 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) //------------- Get Max Lun -------------// TU_LOG_DRV("MSC Get Max Lun\r\n"); - tusb_control_request_t const request = - { - .bmRequestType_bit = - { + tusb_control_request_t const request = { + .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_INTERFACE, .type = TUSB_REQ_TYPE_CLASS, .direction = TUSB_DIR_IN @@ -444,12 +441,11 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) .wLength = 1 }; - tuh_xfer_t xfer = - { + tuh_xfer_t xfer = { .daddr = dev_addr, .ep_addr = 0, .setup = &request, - .buffer = &p_msc->max_lun, + .buffer = _msch_buffer, .complete_cb = config_get_maxlun_complete, .user_data = 0 }; @@ -467,6 +463,8 @@ static void config_get_maxlun_complete (tuh_xfer_t* xfer) p_msc->max_lun = (XFER_RESULT_SUCCESS == xfer->result) ? _msch_buffer[0] : 0; p_msc->max_lun++; // MAX LUN is minus 1 by specs + TU_LOG_DRV(" Max LUN = %u\r\n", p_msc->max_lun); + // TODO multiple LUN support TU_LOG_DRV("SCSI Test Unit Ready\r\n"); uint8_t const lun = 0; -- cgit v1.3.1 From 4938971aad2f2a6adb71f4d8ce76e1d4b664092d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 7 Aug 2023 19:09:36 +0700 Subject: code format --- hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug | 5 +- src/portable/raspberrypi/pio_usb/hcd_pio_usb.c | 73 +++++++++--------------- 2 files changed, 29 insertions(+), 49 deletions(-) (limited to 'src') diff --git a/hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug b/hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug index 6e298c62d..f94960f09 100644 --- a/hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug +++ b/hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug @@ -10,7 +10,7 @@ */ void OnProjectLoad (void) { Project.AddSvdFile ("Cortex-M3.svd"); - Project.AddSvdFile ("./LPC18xx.svd"); + Project.AddSvdFile ("../../../../../../../cmsis-svd/data/NXP/LPC18xx.svd"); Project.SetDevice ("LPC1857"); Project.SetHostIF ("USB", ""); @@ -20,7 +20,8 @@ void OnProjectLoad (void) { Project.SetTraceSource ("Trace Pins"); Project.SetTracePortWidth (4); - File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-mcb1800/cdc_msc.elf"); + //File.Open ("../../../../../../examples/cmake-build-mcb1800/device/cdc_msc/cdc_msc.elf"); + File.Open ("../../../../../../examples/cmake-build-mcb1800/host/cdc_msc_hid/cdc_msc_hid.elf"); } /********************************************************************* * diff --git a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c index adb83e97d..93bc1bf43 100644 --- a/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c +++ b/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c @@ -48,16 +48,14 @@ static pio_usb_configuration_t pio_host_cfg = PIO_USB_DEFAULT_CONFIG; //--------------------------------------------------------------------+ // HCD API //--------------------------------------------------------------------+ -bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) -{ +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { (void) rhport; TU_VERIFY(cfg_id == TUH_CFGID_RPI_PIO_USB_CONFIGURATION); memcpy(&pio_host_cfg, cfg_param, sizeof(pio_usb_configuration_t)); return true; } -bool hcd_init(uint8_t rhport) -{ +bool hcd_init(uint8_t rhport) { (void) rhport; // To run USB SOF interrupt in core1, call this init in core1 @@ -66,20 +64,17 @@ bool hcd_init(uint8_t rhport) return true; } -void hcd_port_reset(uint8_t rhport) -{ +void hcd_port_reset(uint8_t rhport) { uint8_t const pio_rhport = RHPORT_PIO(rhport); pio_usb_host_port_reset_start(pio_rhport); } -void hcd_port_reset_end(uint8_t rhport) -{ +void hcd_port_reset_end(uint8_t rhport) { uint8_t const pio_rhport = RHPORT_PIO(rhport); pio_usb_host_port_reset_end(pio_rhport); } -bool hcd_port_connect_status(uint8_t rhport) -{ +bool hcd_port_connect_status(uint8_t rhport) { uint8_t const pio_rhport = RHPORT_PIO(rhport); root_port_t *root = PIO_USB_ROOT_PORT(pio_rhport); @@ -88,33 +83,28 @@ bool hcd_port_connect_status(uint8_t rhport) return line_state != PORT_PIN_SE0; } -tusb_speed_t hcd_port_speed_get(uint8_t rhport) -{ +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { // TODO determine link speed uint8_t const pio_rhport = RHPORT_PIO(rhport); return PIO_USB_ROOT_PORT(pio_rhport)->is_fullspeed ? TUSB_SPEED_FULL : TUSB_SPEED_LOW; } // Close all opened endpoint belong to this device -void hcd_device_close(uint8_t rhport, uint8_t dev_addr) -{ +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { uint8_t const pio_rhport = RHPORT_PIO(rhport); pio_usb_host_close_device(pio_rhport, dev_addr); } -uint32_t hcd_frame_number(uint8_t rhport) -{ +uint32_t hcd_frame_number(uint8_t rhport) { (void) rhport; return pio_usb_host_get_frame_number(); } -void hcd_int_enable(uint8_t rhport) -{ +void hcd_int_enable(uint8_t rhport) { (void) rhport; } -void hcd_int_disable(uint8_t rhport) -{ +void hcd_int_disable(uint8_t rhport) { (void) rhport; } @@ -122,18 +112,16 @@ void hcd_int_disable(uint8_t rhport) // Endpoint API //--------------------------------------------------------------------+ -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep) -{ +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const *desc_ep) { hcd_devtree_info_t dev_tree; hcd_devtree_get_info(dev_addr, &dev_tree); bool const need_pre = (dev_tree.hub_addr && dev_tree.speed == TUSB_SPEED_LOW); uint8_t const pio_rhport = RHPORT_PIO(rhport); - return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const*) desc_ep, need_pre); + return pio_usb_host_endpoint_open(pio_rhport, dev_addr, (uint8_t const *) desc_ep, need_pre); } -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) -{ +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t *buffer, uint16_t buflen) { uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_host_endpoint_transfer(pio_rhport, dev_addr, ep_addr, buffer, buflen); } @@ -143,8 +131,7 @@ bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return pio_usb_host_endpoint_abort_transfer(pio_rhport, dev_addr, ep_addr); } -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) -{ +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { uint8_t const pio_rhport = RHPORT_PIO(rhport); return pio_usb_host_send_setup(pio_rhport, dev_addr, setup_packet); } @@ -171,18 +158,16 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { return true; } -static void __no_inline_not_in_flash_func(handle_endpoint_irq)(root_port_t* rport, xfer_result_t result, volatile uint32_t* ep_reg) -{ +static void __no_inline_not_in_flash_func(handle_endpoint_irq)(root_port_t *rport, xfer_result_t result, + volatile uint32_t *ep_reg) { (void) rport; const uint32_t ep_all = *ep_reg; - for(uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++) - { + for ( uint8_t ep_idx = 0; ep_idx < PIO_USB_EP_POOL_CNT; ep_idx++ ) { uint32_t const mask = (1u << ep_idx); - if (ep_all & mask) - { - endpoint_t* ep = PIO_USB_ENDPOINT(ep_idx); + if ( ep_all & mask ) { + endpoint_t * ep = PIO_USB_ENDPOINT(ep_idx); hcd_event_xfer_complete(ep->dev_addr, ep->ep_num, ep->actual_len, result, true); } } @@ -192,34 +177,28 @@ static void __no_inline_not_in_flash_func(handle_endpoint_irq)(root_port_t* rpor } // IRQ Handler -void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) -{ +void __no_inline_not_in_flash_func(pio_usb_host_irq_handler)(uint8_t root_id) { uint8_t const tu_rhport = root_id + 1; - root_port_t* rport = PIO_USB_ROOT_PORT(root_id); + root_port_t *rport = PIO_USB_ROOT_PORT(root_id); uint32_t const ints = rport->ints; - if ( ints & PIO_USB_INTS_CONNECT_BITS ) - { + if ( ints & PIO_USB_INTS_CONNECT_BITS ) { hcd_event_device_attach(tu_rhport, true); } - if ( ints & PIO_USB_INTS_DISCONNECT_BITS ) - { + if ( ints & PIO_USB_INTS_DISCONNECT_BITS ) { hcd_event_device_remove(tu_rhport, true); } - if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) - { + if ( ints & PIO_USB_INTS_ENDPOINT_COMPLETE_BITS ) { handle_endpoint_irq(rport, XFER_RESULT_SUCCESS, &rport->ep_complete); } - if ( ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) - { + if ( ints & PIO_USB_INTS_ENDPOINT_STALLED_BITS ) { handle_endpoint_irq(rport, XFER_RESULT_STALLED, &rport->ep_stalled); } - if ( ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) - { + if ( ints & PIO_USB_INTS_ENDPOINT_ERROR_BITS ) { handle_endpoint_irq(rport, XFER_RESULT_FAILED, &rport->ep_error); } -- cgit v1.3.1 From c959e65edde0b07b80c3e12f177afd938abbdcd6 Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Mon, 7 Aug 2023 21:16:41 +0200 Subject: Fixing wrong callback placement --- src/device/usbd.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) (limited to 'src') diff --git a/src/device/usbd.c b/src/device/usbd.c index b4ca63c9c..2daf91d77 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -711,7 +711,16 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const } // switch to new configuration if not zero - if ( cfg_num ) TU_ASSERT( process_set_config(rhport, cfg_num) ); + if ( cfg_num ) + { + TU_ASSERT( process_set_config(rhport, cfg_num) ); + + if ( tud_mount_cb ) tud_mount_cb(); + } + else + { + if ( tud_umount_cb ) tud_umount_cb(); + } } _usbd_dev.cfg_num = cfg_num; @@ -964,16 +973,6 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num) TU_ASSERT(drv_id < TOTAL_DRIVER_COUNT); } - // invoke callback - if (cfg_num) - { - if (tud_mount_cb) tud_mount_cb(); - } - else - { - if (tud_umount_cb) tud_umount_cb(); - } - return true; } -- cgit v1.3.1 From 9602c06f8d52212b55b02533e188e91b7192c080 Mon Sep 17 00:00:00 2001 From: Rocky04 Date: Mon, 7 Aug 2023 21:25:50 +0200 Subject: Correcting comments --- src/device/usbd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/device/usbd.c b/src/device/usbd.c index 2daf91d77..156b92ce1 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -710,9 +710,10 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const _usbd_dev.speed = speed; // restore speed } - // switch to new configuration if not zero + // Handle the new configuration and execute the corresponding callback if ( cfg_num ) { + // switch to new configuration if not zero TU_ASSERT( process_set_config(rhport, cfg_num) ); if ( tud_mount_cb ) tud_mount_cb(); -- cgit v1.3.1 From 6d877c31705e4343d30e2a6b65cbd230a3fe2001 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 8 Aug 2023 18:50:24 +0700 Subject: added cmake for lpc54, update lpc55 --- hw/bsp/lpc54/boards/lpcxpresso54608/board.h | 59 ++++++++ hw/bsp/lpc54/boards/lpcxpresso54608/board.mk | 18 +++ hw/bsp/lpc54/boards/lpcxpresso54628/board.cmake | 22 +++ hw/bsp/lpc54/family.cmake | 157 +++++++++++++++++++++ hw/bsp/lpc55/boards/double_m33_express/board.cmake | 7 +- hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake | 5 + hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake | 7 +- hw/bsp/lpc55/family.cmake | 134 +++++++++++------- src/tusb_option.h | 7 +- 9 files changed, 356 insertions(+), 60 deletions(-) create mode 100644 hw/bsp/lpc54/boards/lpcxpresso54608/board.h create mode 100644 hw/bsp/lpc54/boards/lpcxpresso54608/board.mk create mode 100644 hw/bsp/lpc54/boards/lpcxpresso54628/board.cmake create mode 100644 hw/bsp/lpc54/family.cmake (limited to 'src') diff --git a/hw/bsp/lpc54/boards/lpcxpresso54608/board.h b/hw/bsp/lpc54/boards/lpcxpresso54608/board.h new file mode 100644 index 000000000..8bbe18155 --- /dev/null +++ b/hw/bsp/lpc54/boards/lpcxpresso54608/board.h @@ -0,0 +1,59 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_LPCXPRESSO54608_H_ +#define BOARD_LPCXPRESSO54608_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PORT 2 +#define LED_PIN 2 +#define LED_STATE_ON 0 + +// WAKE button +#define BUTTON_PORT 1 +#define BUTTON_PIN 1 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_DEV USART0 +#define UART_RX_PINMUX 0, 29, IOCON_PIO_DIG_FUNC1_EN +#define UART_TX_PINMUX 0, 30, IOCON_PIO_DIG_FUNC1_EN + +// USB0 VBUS +#define USB0_VBUS_PINMUX 0, 22, IOCON_PIO_DIG_FUNC7_EN + +// XTAL +//#define XTAL0_CLK_HZ (16 * 1000 * 1000U) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/lpc54/boards/lpcxpresso54608/board.mk b/hw/bsp/lpc54/boards/lpcxpresso54608/board.mk new file mode 100644 index 000000000..af2eaf507 --- /dev/null +++ b/hw/bsp/lpc54/boards/lpcxpresso54608/board.mk @@ -0,0 +1,18 @@ +MCU_VARIANT = LPC54608 +MCU_CORE = LPC54608 + +PORT ?= 1 + +CFLAGS += -DCPU_LPC54608J512ET180 +CFLAGS += -Wno-error=double-promotion + +LD_FILE = $(MCU_DIR)/gcc/LPC54608J512_flash.ld + +LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a + +JLINK_DEVICE = LPC54608J512 +PYOCD_TARGET = LPC54608 + +#flash: flash-pyocd + +flash: flash-jlink diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.cmake b/hw/bsp/lpc54/boards/lpcxpresso54628/board.cmake new file mode 100644 index 000000000..1dea6f353 --- /dev/null +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.cmake @@ -0,0 +1,22 @@ +set(MCU_VARIANT LPC54628) +set(MCU_CORE LPC54628) + +set(JLINK_DEVICE LPC54628J512) +set(PYOCD_TARGET LPC54628) +set(NXPLINK_DEVICE LPC54628:LPCXpresso54628) + +set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/LPC54628J512_flash.ld) + +# Device port default to PORT1 Highspeed +if (NOT DEFINED PORT) + set(PORT 1) +endif() + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CPU_LPC54628J512ET180 + ) + target_link_libraries(${TARGET} PUBLIC + ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/libpower_hardabi.a + ) +endfunction() diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake new file mode 100644 index 000000000..0512fe31f --- /dev/null +++ b/hw/bsp/lpc54/family.cmake @@ -0,0 +1,157 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS LPC54 CACHE INTERNAL "") + +if (NOT DEFINED PORT) + set(PORT 0) +endif() + +# Host port will be the other port if available +set(HOST_PORT $) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + # driver + ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c + ${SDK_DIR}/drivers/common/fsl_common_arm.c + ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c + ${SDK_DIR}/drivers/flexcomm/fsl_usart.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) + BOARD_TUD_RHPORT=${PORT} + BOARD_TUH_RHPORT=${HOST_PORT} + ) + # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM + if (PORT EQUAL 1) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED + CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) + ) + else () + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED + CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) + ) + endif () + + target_include_directories(${BOARD_TARGET} PUBLIC + ${TOP}/lib/sct_neopixel + # driver + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/lpc_iocon + ${SDK_DIR}/drivers/lpc_gpio + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/sctimer + # mcu + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ) + + update_board(${BOARD_TARGET}) + + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + endif () + + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + endif () + + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + # external driver + ${TOP}/lib/sct_neopixel/sct_neopixel.c + ) + + # https://github.com/gsteiert/sct_neopixel/pull/1 + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c PROPERTIES + COMPILE_FLAGS "-Wno-unused-parameter") + endif () + + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_LPC54 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) + #family_flash_nxplink(${TARGET}) + #family_flash_pyocd(${TARGET}) +endfunction() diff --git a/hw/bsp/lpc55/boards/double_m33_express/board.cmake b/hw/bsp/lpc55/boards/double_m33_express/board.cmake index f84e629c7..3324ce888 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/board.cmake +++ b/hw/bsp/lpc55/boards/double_m33_express/board.cmake @@ -7,10 +7,13 @@ set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/LPC55S69_cm33_core0_uf2.ld) +# Device port default to PORT1 Highspeed +if (NOT DEFINED PORT) + set(PORT 1) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S69JBD100_cm33_core0 - # port 1 is highspeed - BOARD_TUD_RHPORT=1 ) endfunction() diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake index d935b70e6..b3d0c3349 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s28/board.cmake @@ -5,6 +5,11 @@ set(JLINK_DEVICE LPC55S28) set(PYOCD_TARGET LPC55S28) set(NXPLINK_DEVICE LPC55S28:LPCXpresso55S28) +# Device port default to PORT1 Highspeed +if (NOT DEFINED PORT) + set(PORT 1) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S28JBD100 diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake index fd7cb6de6..3af6034ad 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake @@ -5,10 +5,13 @@ set(JLINK_DEVICE LPC55S69) set(PYOCD_TARGET LPC55S69) set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) +# Device port default to PORT1 Highspeed +if (NOT DEFINED PORT) + set(PORT 1) +endif() + function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC CPU_LPC55S69JBD100_cm33_core0 - # port 1 is highspeed - # BOARD_TUD_RHPORT=1 ) endfunction() diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index dfd08a732..dce197b2d 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -7,79 +7,105 @@ endif () set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS LPC55XX CACHE INTERNAL "") +set(FAMILY_MCUS LPC55 CACHE INTERNAL "") -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +if (NOT DEFINED PORT) + set(PORT 0) +endif() +# Host port will be the other port if available +set(HOST_PORT $) #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - # driver - ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c - ${SDK_DIR}/drivers/common/fsl_common_arm.c - ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c - ${SDK_DIR}/drivers/flexcomm/fsl_usart.c - # mcu - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c - ) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + add_library(${BOARD_TARGET} STATIC + # driver + ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c + ${SDK_DIR}/drivers/common/fsl_common_arm.c + ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c + ${SDK_DIR}/drivers/flexcomm/fsl_usart.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ) + + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) + BOARD_TUD_RHPORT=${PORT} + BOARD_TUH_RHPORT=${HOST_PORT} + ) + # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM + if (PORT EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC - CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED + CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${TOP}/lib/sct_neopixel - # driver - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/flexcomm - ${SDK_DIR}/drivers/lpc_iocon - ${SDK_DIR}/drivers/lpc_gpio - ${SDK_DIR}/drivers/lpuart - ${SDK_DIR}/drivers/sctimer - # mcu - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + else () + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED + CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) + endif () - update_board(${BOARD_TARGET}) + target_include_directories(${BOARD_TARGET} PUBLIC + ${TOP}/lib/sct_neopixel + # driver + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/lpc_iocon + ${SDK_DIR}/drivers/lpc_gpio + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/sctimer + # mcu + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () + update_board(${BOARD_TARGET}) - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) - endif () + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + endif () - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + endif () - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - # linker file - "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) endif () endfunction() @@ -117,7 +143,7 @@ function(family_configure_example TARGET RTOS) ) # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX ${RTOS}) + family_add_tinyusb(${TARGET} OPT_MCU_LPC55 ${RTOS}) target_sources(${TARGET}-tinyusb PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) diff --git a/src/tusb_option.h b/src/tusb_option.h index 7a4cfe51c..c72117850 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -51,8 +51,11 @@ #define OPT_MCU_LPC40XX 7 ///< NXP LPC40xx #define OPT_MCU_LPC43XX 8 ///< NXP LPC43xx #define OPT_MCU_LPC51UXX 9 ///< NXP LPC51U6x -#define OPT_MCU_LPC54XXX 10 ///< NXP LPC54xxx -#define OPT_MCU_LPC55XX 11 ///< NXP LPC55xx +#define OPT_MCU_LPC54 10 ///< NXP LPC54 +#define OPT_MCU_LPC55 11 ///< NXP LPC55 +// legacy naming +#define OPT_MCU_LPC54XXX OPT_MCU_LPC54 +#define OPT_MCU_LPC55XX OPT_MCU_LPC55 // NRF #define OPT_MCU_NRF5X 100 ///< Nordic nRF5x series -- cgit v1.3.1 From b8b01c10758043d318716569e693912f3e02c75b Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 8 Aug 2023 21:59:36 +0700 Subject: update to dcd ip3511 to add work-around for lpc54628 usb hs errata USB.1 and USB.2 msc is mounted, but device couldn't work reliably and got constant reset due to other errata probably. --- .idea/cmake.xml | 4 +- hw/bsp/lpc54/family.c | 6 +- hw/bsp/lpc54/family.cmake | 1 + src/common/tusb_common.h | 5 +- src/common/tusb_mcu.h | 8 +- src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c | 266 ++++++++++++++++----------- 6 files changed, 170 insertions(+), 120 deletions(-) (limited to 'src') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 76143ba10..4a69d02cf 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -30,7 +30,8 @@ - + + @@ -51,6 +52,7 @@ + \ No newline at end of file diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 108a7d783..7411c72d4 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -70,13 +70,11 @@ //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ +void USB0_IRQHandler(void) { tud_int_handler(0); } -void USB1_IRQHandler(void) -{ +void USB1_IRQHandler(void) { tud_int_handler(1); } diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index 0512fe31f..b016441c1 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -59,6 +59,7 @@ function(add_board_target BOARD_TARGET) BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) + #CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) endif () diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 25f85e501..c303c6eaf 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -159,11 +159,12 @@ TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_max16 (uint16_t x, uint16_t y) { TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_max32 (uint32_t x, uint32_t y) { return (x > y) ? x : y; } //------------- Align -------------// -TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align(uint32_t value, uint32_t alignment) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align(uint32_t value, uint32_t alignment) { return value & ((uint32_t) ~(alignment-1)); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align4 (uint32_t value) { return (value & 0xFFFFFFFCUL); } +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align8 (uint32_t value) { return (value & 0xFFFFFFF8UL); } TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align16 (uint32_t value) { return (value & 0xFFFFFFF0UL); } TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align32 (uint32_t value) { return (value & 0xFFFFFFE0UL); } TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_align4k (uint32_t value) { return (value & 0xFFFFF000UL); } diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 89f89182e..35f94efbc 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -58,6 +58,7 @@ // NXP //--------------------------------------------------------------------+ #if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) + #define TUP_USBIP_IP3511 #define TUP_DCD_ENDPOINT_MAX 5 #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX) @@ -66,14 +67,17 @@ #define TUP_OHCI_RHPORTS 2 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX) + #define TUP_USBIP_IP3511 #define TUP_DCD_ENDPOINT_MAX 5 -#elif TU_CHECK_MCU(OPT_MCU_LPC54XXX) +#elif TU_CHECK_MCU(OPT_MCU_LPC54) // TODO USB0 has 5, USB1 has 6 + #define TUP_USBIP_IP3511 #define TUP_DCD_ENDPOINT_MAX 6 -#elif TU_CHECK_MCU(OPT_MCU_LPC55XX) +#elif TU_CHECK_MCU(OPT_MCU_LPC55) // TODO USB0 has 5, USB1 has 6 + #define TUP_USBIP_IP3511 #define TUP_DCD_ENDPOINT_MAX 6 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX) diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c index 7ca698a93..f4ed09d83 100644 --- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c +++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c @@ -34,18 +34,13 @@ * - LPC54114 * - LPC55s69 */ -#if CFG_TUD_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_LPC11UXX || \ - CFG_TUSB_MCU == OPT_MCU_LPC13XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC15XX || \ - CFG_TUSB_MCU == OPT_MCU_LPC51UXX || \ - CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \ - CFG_TUSB_MCU == OPT_MCU_LPC55XX) +#if CFG_TUD_ENABLED && defined(TUP_USBIP_IP3511) //--------------------------------------------------------------------+ // INCLUDE //--------------------------------------------------------------------+ -#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX || CFG_TUSB_MCU == OPT_MCU_LPC13XX || CFG_TUSB_MCU == OPT_MCU_LPC15XX +#if TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX) // LPCOpen #include "chip.h" #else @@ -80,7 +75,7 @@ typedef struct { enum { NBYTES_ISO_FS_MAX = 1023, // FS ISO NBYTES_ISO_HS_MAX = 1024, // HS ISO - NBYTES_CBI_FS_MAX = 64, // FS control/bulk/interrupt + NBYTES_CBI_FS_MAX = 64, // FS control/bulk/interrupt. TODO some FS can do burst with higher size e.g 1024. Need to test NBYTES_CBI_HS_MAX = 32767 // can be up to all 15-bit, but only tested with 4096 }; @@ -90,26 +85,36 @@ enum { }; enum { - CMDSTAT_DEVICE_ADDR_MASK = TU_BIT(7 )-1, - CMDSTAT_DEVICE_ENABLE_MASK = TU_BIT(7 ), - CMDSTAT_SETUP_RECEIVED_MASK = TU_BIT(8 ), - CMDSTAT_DEVICE_CONNECT_MASK = TU_BIT(16), // reflect the soft-connect only, does not reflect the actual attached state - CMDSTAT_DEVICE_SUSPEND_MASK = TU_BIT(17), - // 23-22 is link speed (only available for HighSpeed port) - CMDSTAT_CONNECT_CHANGE_MASK = TU_BIT(24), - CMDSTAT_SUSPEND_CHANGE_MASK = TU_BIT(25), - CMDSTAT_RESET_CHANGE_MASK = TU_BIT(26), - CMDSTAT_VBUS_DEBOUNCED_MASK = TU_BIT(28), + DEVCMDSTAT_DEVICE_ADDR_MASK = TU_BIT(7 )-1, + DEVCMDSTAT_DEVICE_ENABLE_MASK = TU_BIT(7 ), + DEVCMDSTAT_SETUP_RECEIVED_MASK = TU_BIT(8 ), + DEVCMDSTAT_DEVICE_CONNECT_MASK = TU_BIT(16), // reflect the soft-connect only, does not reflect the actual attached state + DEVCMDSTAT_DEVICE_SUSPEND_MASK = TU_BIT(17), + // 23-22 is link speed (only available for HighSpeed port) + DEVCMDSTAT_CONNECT_CHANGE_MASK = TU_BIT(24), + DEVCMDSTAT_SUSPEND_CHANGE_MASK = TU_BIT(25), + DEVCMDSTAT_RESET_CHANGE_MASK = TU_BIT(26), + DEVCMDSTAT_VBUS_DEBOUNCED_MASK = TU_BIT(28), }; enum { - CMDSTAT_SPEED_SHIFT = 22 + DEVCMDSTAT_SPEED_SHIFT = 22 }; //--------------------------------------------------------------------+ // Endpoint Command/Status List //--------------------------------------------------------------------+ +// EP Command/Status field definition +enum { + EPCS_TYPE = TU_BIT(26), + EPCS_RF_TV = TU_BIT(27), + EPCS_TOGGLE_RESET = TU_BIT(28), + EPCS_STALL = TU_BIT(29), + EPCS_DISABLED = TU_BIT(30), + EPCS_ACTIVE = TU_BIT(31), +}; + // Endpoint Command/Status typedef union TU_ATTR_PACKED { @@ -133,8 +138,8 @@ typedef union TU_ATTR_PACKED volatile struct { uint32_t TU_RESERVED : 26; - uint32_t is_iso : 1 ; - uint32_t toggle_mode : 1 ; + uint32_t type : 1 ; + uint32_t rf_tv : 1 ; // rate feedback or toggle value uint32_t toggle_reset : 1 ; uint32_t stall : 1 ; uint32_t disable : 1 ; @@ -180,6 +185,7 @@ typedef struct CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(256) static dcd_data_t _dcd; // Dummy buffer to fix ZLPs overwriting the buffer (probably an USB/DMA controller bug) +// TODO find way to save memory CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; //--------------------------------------------------------------------+ @@ -188,59 +194,73 @@ CFG_TUD_MEM_SECTION TU_ATTR_ALIGNED(64) static uint8_t dummy[8]; typedef struct { - dcd_registers_t* regs; // registers - const tusb_speed_t max_speed; // max link speed - const IRQn_Type irqnum; // IRQ number - const uint8_t ep_pairs; // Max bi-directional Endpoints + dcd_registers_t* regs; // registers + const bool is_highspeed; // max link speed + const IRQn_Type irqnum; // IRQ number + const uint8_t ep_pairs; // Max bi-directional Endpoints }dcd_controller_t; #ifdef INCLUDE_FSL_DEVICE_REGISTERS -static const dcd_controller_t _dcd_controller[] = -{ - { .regs = (dcd_registers_t*) USB0_BASE , .max_speed = TUSB_SPEED_FULL, .irqnum = USB0_IRQn, .ep_pairs = FSL_FEATURE_USB_EP_NUM }, +static const dcd_controller_t _dcd_controller[] = { + { .regs = (dcd_registers_t*) USB0_BASE , .is_highspeed = false, .irqnum = USB0_IRQn, .ep_pairs = FSL_FEATURE_USB_EP_NUM }, #if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT - { .regs = (dcd_registers_t*) USBHSD_BASE, .max_speed = TUSB_SPEED_HIGH, .irqnum = USB1_IRQn, .ep_pairs = FSL_FEATURE_USBHSD_EP_NUM } + { .regs = (dcd_registers_t*) USBHSD_BASE, .is_highspeed = true, .irqnum = USB1_IRQn, .ep_pairs = FSL_FEATURE_USBHSD_EP_NUM } #endif }; #else -static const dcd_controller_t _dcd_controller[] = -{ - { .regs = (dcd_registers_t*) LPC_USB0_BASE, .max_speed = TUSB_SPEED_FULL, .irqnum = USB0_IRQn, .ep_pairs = 5 }, +static const dcd_controller_t _dcd_controller[] = { + { .regs = (dcd_registers_t*) LPC_USB0_BASE, .is_highspeed = false, .irqnum = USB0_IRQn, .ep_pairs = 5 }, }; #endif +#if defined(FSL_FEATURE_SOC_USBHSD_COUNT) && FSL_FEATURE_SOC_USBHSD_COUNT + #define IP3511_HAS_HIGHSPEED +#endif + //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION //--------------------------------------------------------------------+ -static inline uint16_t get_buf_offset(void const * buffer) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t get_buf_offset(void const * buffer) { uint32_t addr = (uint32_t) buffer; TU_ASSERT( (addr & 0x3f) == 0, 0 ); return ( (addr >> 6) & 0xFFFFUL ) ; } -static inline uint8_t ep_addr2id(uint8_t ep_addr) -{ +TU_ATTR_ALWAYS_INLINE static inline uint8_t ep_addr2id(uint8_t ep_addr) { return 2*(ep_addr & 0x0F) + ((ep_addr & TUSB_DIR_IN_MASK) ? 1 : 0); } +TU_ATTR_ALWAYS_INLINE static inline bool ep_is_iso(ep_cmd_sts_t* ep_cs, bool is_highspeed) { + return is_highspeed ? (ep_cs[0].cmd_sts.type && !ep_cs[0].cmd_sts.rf_tv) : ep_cs->cmd_sts.type; +} + +TU_ATTR_ALWAYS_INLINE static inline bool ep_is_bulk(ep_cmd_sts_t* ep_cs) { + return (ep_cs[0].cmd_sts.type == 0) && (ep_cs[0].cmd_sts.rf_tv == 0); +} + +TU_ATTR_ALWAYS_INLINE static inline ep_cmd_sts_t* get_ep_cs(uint8_t ep_id) { + return _dcd.ep[ep_id]; +} + +TU_ATTR_ALWAYS_INLINE static inline bool rhport_is_highspeed(uint8_t rhport) { + return _dcd_controller[rhport].is_highspeed; +} + //--------------------------------------------------------------------+ // CONTROLLER API //--------------------------------------------------------------------+ -static void prepare_setup_packet(uint8_t rhport) -{ - if (_dcd_controller[rhport].max_speed == TUSB_SPEED_FULL ) - { - _dcd.ep[0][1].buffer_fs.offset = get_buf_offset(_dcd.setup_packet); - }else - { - _dcd.ep[0][1].buffer_hs.offset = get_buf_offset(_dcd.setup_packet); +static void prepare_setup_packet(uint8_t rhport) { + uint16_t const buf_offset = get_buf_offset(_dcd.setup_packet); + if ( _dcd_controller[rhport].is_highspeed ) { + _dcd.ep[0][1].buffer_hs.offset = buf_offset; + } else { + _dcd.ep[0][1].buffer_fs.offset = buf_offset; } } @@ -268,8 +288,8 @@ void dcd_init(uint8_t rhport) dcd_reg->DATABUFSTART = tu_align((uint32_t) &_dcd, TU_BIT(22)); // 22-bit alignment dcd_reg->INTSTAT |= dcd_reg->INTSTAT; // clear all pending interrupt dcd_reg->INTEN = INT_DEVICE_STATUS_MASK; - dcd_reg->DEVCMDSTAT |= CMDSTAT_DEVICE_ENABLE_MASK | CMDSTAT_DEVICE_CONNECT_MASK | - CMDSTAT_RESET_CHANGE_MASK | CMDSTAT_CONNECT_CHANGE_MASK | CMDSTAT_SUSPEND_CHANGE_MASK; + dcd_reg->DEVCMDSTAT |= DEVCMDSTAT_DEVICE_ENABLE_MASK | DEVCMDSTAT_DEVICE_CONNECT_MASK | + DEVCMDSTAT_RESET_CHANGE_MASK | DEVCMDSTAT_CONNECT_CHANGE_MASK | DEVCMDSTAT_SUSPEND_CHANGE_MASK; NVIC_ClearPendingIRQ(_dcd_controller[rhport].irqnum); } @@ -291,7 +311,7 @@ void dcd_set_address(uint8_t rhport, uint8_t dev_addr) // Response with status first before changing device address dcd_edpt_xfer(rhport, tu_edpt_addr(0, TUSB_DIR_IN), NULL, 0); - dcd_reg->DEVCMDSTAT &= ~CMDSTAT_DEVICE_ADDR_MASK; + dcd_reg->DEVCMDSTAT &= ~DEVCMDSTAT_DEVICE_ADDR_MASK; dcd_reg->DEVCMDSTAT |= dev_addr; } @@ -303,13 +323,13 @@ void dcd_remote_wakeup(uint8_t rhport) void dcd_connect(uint8_t rhport) { dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->DEVCMDSTAT |= CMDSTAT_DEVICE_CONNECT_MASK; + dcd_reg->DEVCMDSTAT |= DEVCMDSTAT_DEVICE_CONNECT_MASK; } void dcd_disconnect(uint8_t rhport) { dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; - dcd_reg->DEVCMDSTAT &= ~CMDSTAT_DEVICE_CONNECT_MASK; + dcd_reg->DEVCMDSTAT &= ~DEVCMDSTAT_DEVICE_CONNECT_MASK; } void dcd_sof_enable(uint8_t rhport, bool en) @@ -340,19 +360,39 @@ void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr) _dcd.ep[ep_id][0].cmd_sts.stall = 0; _dcd.ep[ep_id][0].cmd_sts.toggle_reset = 1; - _dcd.ep[ep_id][0].cmd_sts.toggle_mode = 0; + _dcd.ep[ep_id][0].cmd_sts.rf_tv = 0; } bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc) { //------------- Prepare Queue Head -------------// uint8_t ep_id = ep_addr2id(p_endpoint_desc->bEndpointAddress); + ep_cmd_sts_t* ep_cs = get_ep_cs(ep_id); // Check if endpoint is available - TU_ASSERT( _dcd.ep[ep_id][0].cmd_sts.disable && _dcd.ep[ep_id][1].cmd_sts.disable ); + TU_ASSERT( ep_cs[0].cmd_sts.disable && ep_cs[1].cmd_sts.disable ); edpt_reset(rhport, ep_id); - _dcd.ep[ep_id][0].cmd_sts.is_iso = (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS); + + switch (p_endpoint_desc->bmAttributes.xfer) { + case TUSB_XFER_ISOCHRONOUS: + ep_cs[0].cmd_sts.type = 1; + break; + + case TUSB_XFER_INTERRUPT: + // What is interrupt endpoint in rate feedback mode ? + if ( rhport_is_highspeed(rhport) ) { + ep_cs[0].cmd_sts.type = 1; + ep_cs[0].cmd_sts.rf_tv = 1; + } + break; + + case TUSB_XFER_BULK: + // nothing to do both type and rf_tv are 0 + break; + + default: break; + } // Enable EP interrupt dcd_registers_t* dcd_reg = _dcd_controller[rhport].regs; @@ -379,42 +419,50 @@ void dcd_edpt_close(uint8_t rhport, uint8_t ep_addr) _dcd.ep[ep_id][0].cmd_sts.disable = _dcd.ep[ep_id][1].cmd_sts.disable = 1; } -static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset, uint16_t total_bytes) -{ +static void prepare_ep_xfer(uint8_t rhport, uint8_t ep_id, uint16_t buf_offset, uint16_t total_bytes) { uint16_t nbytes; - - if (_dcd_controller[rhport].max_speed == TUSB_SPEED_FULL ) - { - nbytes = tu_min16(total_bytes, _dcd.ep[ep_id][0].cmd_sts.is_iso ? NBYTES_ISO_FS_MAX : NBYTES_CBI_FS_MAX); - _dcd.ep[ep_id][0].buffer_fs.offset = buf_offset; - _dcd.ep[ep_id][0].buffer_fs.nbytes = nbytes; - }else - { - nbytes = tu_min16(total_bytes, NBYTES_CBI_HS_MAX); - _dcd.ep[ep_id][0].buffer_hs.offset = buf_offset; - _dcd.ep[ep_id][0].buffer_hs.nbytes = nbytes; + ep_cmd_sts_t* ep_cs = get_ep_cs(ep_id); + + const bool is_iso = ep_is_iso(ep_cs, _dcd_controller[rhport].is_highspeed); + + if ( rhport_is_highspeed(rhport) ) { + nbytes = tu_min16(total_bytes, is_iso ? NBYTES_ISO_HS_MAX : NBYTES_CBI_HS_MAX); + #if TU_CHECK_MCU(OPT_MCU_LPC54) + // LPC54 Errata USB.1: In USB high-speed device mode, the NBytes field does not decrement after BULK OUT transfer. + // Suggested Work-around: Program the NByte to the max packet size (512) + // Actual Work-around: round up NByte to multiple of 4. + // Note: this can cause buffer overflowed and corrupt data if host send more data than total_bytes + if ( (ep_id > 1) && (ep_id & 0x01) == 0 && ep_is_bulk(ep_cs) ) { + if ( nbytes & 0x03 ) { + nbytes = tu_align4(nbytes) + 4; + } + } + #endif + + ep_cs[0].buffer_hs.offset = buf_offset; + ep_cs[0].buffer_hs.nbytes = nbytes; + }else { + nbytes = tu_min16(total_bytes, is_iso ? NBYTES_ISO_FS_MAX : NBYTES_CBI_FS_MAX); + ep_cs[0].buffer_fs.offset = buf_offset; + ep_cs[0].buffer_fs.nbytes = nbytes; } _dcd.dma[ep_id].nbytes = nbytes; - - _dcd.ep[ep_id][0].cmd_sts.active = 1; + ep_cs[0].cmd_sts.active = 1; } -bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) -{ +bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) { uint8_t const ep_id = ep_addr2id(ep_addr); + if (!buffer || total_bytes == 0) { + // Although having no data, ZLPs can cause buffer overwritten to zeroes. Probably due to USB/DMA controller side + // effect/bug. Assigned buffer offset to (valid) dummy to prevent overwriting to DATABUFSTART + buffer = (uint8_t *) (uint32_t) dummy; + } + tu_memclr(&_dcd.dma[ep_id], sizeof(xfer_dma_t)); _dcd.dma[ep_id].total_bytes = total_bytes; - if (!buffer) - { - // Although having no data, ZLPs can cause buffer overwritten to zeroes. - // Probably due to USB/DMA controller side effect/bug. - // Assigned buffer offset to (valid) dummy to prevent overwriting to DATABUFSTART - buffer = (uint8_t*)(uint32_t)dummy; - } - prepare_ep_xfer(rhport, ep_id, get_buf_offset(buffer), total_bytes); return true; @@ -441,23 +489,19 @@ static void bus_reset(uint8_t rhport) dcd_reg->EPSKIP = 0xFFFFFFFF; dcd_reg->INTSTAT = dcd_reg->INTSTAT; // clear all pending interrupt - dcd_reg->DEVCMDSTAT |= CMDSTAT_SETUP_RECEIVED_MASK; // clear setup received interrupt + dcd_reg->DEVCMDSTAT |= DEVCMDSTAT_SETUP_RECEIVED_MASK; // clear setup received interrupt dcd_reg->INTEN = INT_DEVICE_STATUS_MASK | TU_BIT(0) | TU_BIT(1); // enable device status & control endpoints } -static void process_xfer_isr(uint8_t rhport, uint32_t int_status) -{ +static void process_xfer_isr(uint8_t rhport, uint32_t int_status) { uint8_t const max_ep = 2*_dcd_controller[rhport].ep_pairs; - for(uint8_t ep_id = 0; ep_id < max_ep; ep_id++ ) - { - if ( tu_bit_test(int_status, ep_id) ) - { + for(uint8_t ep_id = 0; ep_id < max_ep; ep_id++ ) { + if ( tu_bit_test(int_status, ep_id) ) { ep_cmd_sts_t * ep_cs = &_dcd.ep[ep_id][0]; xfer_dma_t* xfer_dma = &_dcd.dma[ep_id]; - if ( ep_id == 0 || ep_id == 1) - { + if ( ep_id <= 1 ) { // For control endpoint, we need to manually clear Active bit ep_cs->cmd_sts.active = 0; } @@ -465,26 +509,29 @@ static void process_xfer_isr(uint8_t rhport, uint32_t int_status) uint16_t buf_offset; uint16_t buf_nbytes; - if (_dcd_controller[rhport].max_speed == TUSB_SPEED_FULL) - { - buf_offset = ep_cs->buffer_fs.offset; - buf_nbytes = ep_cs->buffer_fs.nbytes; - }else - { + if ( rhport_is_highspeed(rhport) ) { buf_offset = ep_cs->buffer_hs.offset; buf_nbytes = ep_cs->buffer_hs.nbytes; + + #if TU_CHECK_MCU(OPT_MCU_LPC54) + // LPC54 Errata USB.2: In USB high-speed device mode, the NBytes field is not correct after BULK IN transfer + // There is no work-around. For EP in transfer, the NByte value can be ignored after a packet is transmitted. + if ( (ep_id > 1) && (ep_id & 0x01) == 1 && ep_is_bulk(ep_cs) ) { + buf_nbytes = 0; + } + #endif + } else { + buf_offset = ep_cs->buffer_fs.offset; + buf_nbytes = ep_cs->buffer_fs.nbytes; } xfer_dma->xferred_bytes += xfer_dma->nbytes - buf_nbytes; - if ( (buf_nbytes == 0) && (xfer_dma->total_bytes > xfer_dma->xferred_bytes) ) - { + if ( (buf_nbytes == 0) && (xfer_dma->total_bytes > xfer_dma->xferred_bytes) ) { // There is more data to transfer // buff_offset has been already increased by hw to correct value for next transfer prepare_ep_xfer(rhport, ep_id, buf_offset, xfer_dma->total_bytes - xfer_dma->xferred_bytes); - } - else - { + } else { // for detecting ZLP xfer_dma->total_bytes = xfer_dma->xferred_bytes; @@ -511,19 +558,16 @@ void dcd_int_handler(uint8_t rhport) //------------- Device Status -------------// if ( int_status & INT_DEVICE_STATUS_MASK ) { - dcd_reg->DEVCMDSTAT |= CMDSTAT_RESET_CHANGE_MASK | CMDSTAT_CONNECT_CHANGE_MASK | CMDSTAT_SUSPEND_CHANGE_MASK; + dcd_reg->DEVCMDSTAT |= DEVCMDSTAT_RESET_CHANGE_MASK | DEVCMDSTAT_CONNECT_CHANGE_MASK | DEVCMDSTAT_SUSPEND_CHANGE_MASK; - if ( cmd_stat & CMDSTAT_RESET_CHANGE_MASK) // bus reset + if ( cmd_stat & DEVCMDSTAT_RESET_CHANGE_MASK) // bus reset { bus_reset(rhport); tusb_speed_t speed = TUSB_SPEED_FULL; - - if (_dcd_controller[rhport].max_speed == TUSB_SPEED_HIGH) - { + if ( _dcd_controller[rhport].is_highspeed ) { // 0 : reserved, 1 : full, 2 : high, 3: super - if ( 2 == ((cmd_stat >> CMDSTAT_SPEED_SHIFT) & 0x3UL) ) - { + if ( 2 == ((cmd_stat >> DEVCMDSTAT_SPEED_SHIFT) & 0x3UL) ) { speed= TUSB_SPEED_HIGH; } } @@ -531,35 +575,35 @@ void dcd_int_handler(uint8_t rhport) dcd_event_bus_reset(rhport, speed, true); } - if (cmd_stat & CMDSTAT_CONNECT_CHANGE_MASK) + if (cmd_stat & DEVCMDSTAT_CONNECT_CHANGE_MASK) { // device disconnect - if (cmd_stat & CMDSTAT_DEVICE_ADDR_MASK) + if (cmd_stat & DEVCMDSTAT_DEVICE_ADDR_MASK) { // debouncing as this can be set when device is powering dcd_event_bus_signal(rhport, DCD_EVENT_UNPLUGGED, true); } } - if (cmd_stat & CMDSTAT_SUSPEND_CHANGE_MASK) + if (cmd_stat & DEVCMDSTAT_SUSPEND_CHANGE_MASK) { // suspend signal, bus idle for more than 3ms // Note: Host may delay more than 3 ms before and/or after bus reset before doing enumeration. - if (cmd_stat & CMDSTAT_DEVICE_ADDR_MASK) + if (cmd_stat & DEVCMDSTAT_DEVICE_ADDR_MASK) { - dcd_event_bus_signal(rhport, (cmd_stat & CMDSTAT_DEVICE_SUSPEND_MASK) ? DCD_EVENT_SUSPEND : DCD_EVENT_RESUME, true); + dcd_event_bus_signal(rhport, (cmd_stat & DEVCMDSTAT_DEVICE_SUSPEND_MASK) ? DCD_EVENT_SUSPEND : DCD_EVENT_RESUME, true); } } } // Setup Receive - if ( tu_bit_test(int_status, 0) && (cmd_stat & CMDSTAT_SETUP_RECEIVED_MASK) ) + if ( tu_bit_test(int_status, 0) && (cmd_stat & DEVCMDSTAT_SETUP_RECEIVED_MASK) ) { // Follow UM flowchart to clear Active & Stall on both Control IN/OUT endpoints _dcd.ep[0][0].cmd_sts.active = _dcd.ep[1][0].cmd_sts.active = 0; _dcd.ep[0][0].cmd_sts.stall = _dcd.ep[1][0].cmd_sts.stall = 0; - dcd_reg->DEVCMDSTAT |= CMDSTAT_SETUP_RECEIVED_MASK; + dcd_reg->DEVCMDSTAT |= DEVCMDSTAT_SETUP_RECEIVED_MASK; dcd_event_setup_received(rhport, _dcd.setup_packet, true); -- cgit v1.3.1 From bd51afb091f29cdab6520479a1a504409d95aac8 Mon Sep 17 00:00:00 2001 From: tswan-quasi Date: Mon, 14 Aug 2023 08:49:52 -0400 Subject: min on cdc r/w --- src/class/cdc/cdc_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src') diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 70d9c2e24..2c1fda4ff 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -150,7 +150,7 @@ uint32_t tud_cdc_n_available(uint8_t itf) uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) bufsize); + uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) TU_MIN(bufsize, 65535)); _prep_out_transaction(p_cdc); return num_read; } @@ -173,7 +173,7 @@ void tud_cdc_n_read_flush (uint8_t itf) uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) bufsize); + uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, 65535)); // flush if queue more than packet size // may need to suppress -Wunreachable-code since most of the time CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE -- cgit v1.3.1 From b5ba12119dccb123aa6e8798dc86d639af6703b9 Mon Sep 17 00:00:00 2001 From: tswan-quasi Date: Mon, 14 Aug 2023 09:01:30 -0400 Subject: UINT16_MAX stdint macro usage --- src/class/cdc/cdc_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src') diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index 2c1fda4ff..c26264e60 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -150,7 +150,7 @@ uint32_t tud_cdc_n_available(uint8_t itf) uint32_t tud_cdc_n_read(uint8_t itf, void* buffer, uint32_t bufsize) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) TU_MIN(bufsize, 65535)); + uint32_t num_read = tu_fifo_read_n(&p_cdc->rx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); _prep_out_transaction(p_cdc); return num_read; } @@ -173,7 +173,7 @@ void tud_cdc_n_read_flush (uint8_t itf) uint32_t tud_cdc_n_write(uint8_t itf, void const* buffer, uint32_t bufsize) { cdcd_interface_t* p_cdc = &_cdcd_itf[itf]; - uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, 65535)); + uint16_t ret = tu_fifo_write_n(&p_cdc->tx_ff, buffer, (uint16_t) TU_MIN(bufsize, UINT16_MAX)); // flush if queue more than packet size // may need to suppress -Wunreachable-code since most of the time CFG_TUD_CDC_TX_BUFSIZE < BULK_PACKET_SIZE -- cgit v1.3.1 From 9d942967414d7b95f3a132c284ef83f386a0c467 Mon Sep 17 00:00:00 2001 From: rppicomidi Date: Mon, 14 Aug 2023 15:38:48 -0700 Subject: fix issue 2188: support usbh_app_driver_get_cb() --- README.rst | 2 ++ src/host/usbh.c | 86 ++++++++++++++++++++++++++++++++------------- src/host/usbh_classdriver.h | 8 +++++ 3 files changed, 72 insertions(+), 24 deletions(-) (limited to 'src') diff --git a/README.rst b/README.rst index 78e8d87b0..d72cdb149 100644 --- a/README.rst +++ b/README.rst @@ -89,6 +89,8 @@ Host Stack - Mass Storage Class (MSC) - Hub with multiple-level support +Similar to the Device Stack, if you have a special requirement, `usbh_app_driver_get_cb()` can be used to write your own class driver without modifying the stack. + TypeC PD Stack ============== diff --git a/src/host/usbh.c b/src/host/usbh.c index cc7e38b45..af8142be3 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -180,7 +180,7 @@ static usbh_class_driver_t const usbh_class_drivers[] = #endif }; -enum { USBH_CLASS_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; +enum { USBH_BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; enum { CONFIG_NUM = 1 }; // default to use configuration 1 @@ -246,6 +246,21 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); +// Additional class drivers implemented by application +tu_static usbh_class_driver_t const * _app_driver = NULL; +tu_static uint8_t _app_driver_count = 0; +tu_static uint8_t _total_driver_count = USBH_BUILTIN_DRIVER_COUNT; + +static usbh_class_driver_t const * usbh_get_driver(uint8_t drv_id) +{ + usbh_class_driver_t const * driver = NULL; + if ( drv_id < _app_driver_count ) + driver = &_app_driver[drv_id]; + else if ( drv_id < _total_driver_count ) + driver = &usbh_class_drivers[drv_id - _app_driver_count]; + return driver; +} + #if CFG_TUSB_OS == OPT_OS_NONE // TODO rework time-related function later // weak and overridable @@ -339,6 +354,12 @@ bool tuh_init(uint8_t controller_id) { _usbh_mutex = osal_mutex_create(&_usbh_mutexdef); TU_ASSERT(_usbh_mutex); #endif + // Get application driver if available + if ( usbh_app_driver_get_cb ) + { + _app_driver = usbh_app_driver_get_cb(&_app_driver_count); + _total_driver_count = USBH_BUILTIN_DRIVER_COUNT + _app_driver_count; + } // Device tu_memclr(&_dev0, sizeof(_dev0)); @@ -351,10 +372,14 @@ bool tuh_init(uint8_t controller_id) { } // Class drivers - for (uint8_t drv_id = 0; drv_id < USBH_CLASS_DRIVER_COUNT; drv_id++) + for (uint8_t drv_id = 0; drv_id < _total_driver_count; drv_id++) { - TU_LOG_USBH("%s init\r\n", usbh_class_drivers[drv_id].name); - usbh_class_drivers[drv_id].init(); + usbh_class_driver_t const * driver = usbh_get_driver(drv_id); + if ( driver ) + { + TU_LOG_USBH("%s init\r\n", driver->name); + driver->init(); + } } _usbh_controller = controller_id;; @@ -482,12 +507,16 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { }else #endif { - uint8_t const drv_id = dev->ep2drv[epnum][ep_dir]; - if ( drv_id < USBH_CLASS_DRIVER_COUNT ) { - TU_LOG_USBH("%s xfer callback\r\n", usbh_class_drivers[drv_id].name); - usbh_class_drivers[drv_id].xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, + uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; + usbh_class_driver_t const * driver = usbh_get_driver(drv_id); + if ( driver ) + { + TU_LOG_USBH("%s xfer callback\r\n", driver->name); + driver->xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - } else { + } + else + { // no driver/callback responsible for this transfer TU_ASSERT(false,); } @@ -1183,17 +1212,20 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu uint8_t nop_count = 0; #endif - for (uint8_t dev_id = 0; dev_id < TOTAL_DEVICES; dev_id++) { + for (uint8_t dev_id = 0; dev_id < TOTAL_DEVICES; dev_id++) + { usbh_device_t *dev = &_usbh_devices[dev_id]; uint8_t const daddr = dev_id + 1; // hub_addr = 0 means roothub, hub_port = 0 means all devices of downstream hub if (dev->rhport == rhport && dev->connected && (hub_addr == 0 || dev->hub_addr == hub_addr) && - (hub_port == 0 || dev->hub_port == hub_port)) { + (hub_port == 0 || dev->hub_port == hub_port)) + { TU_LOG_USBH("Device unplugged address = %u\r\n", daddr); - if (is_hub_addr(daddr)) { + if (is_hub_addr(daddr)) + { TU_LOG(CFG_TUH_LOG_LEVEL, " is a HUB device %u\r\n", daddr); // Submit removed event If the device itself is a hub (un-rolled recursive) @@ -1211,10 +1243,14 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu } // Close class driver - for (uint8_t drv_id = 0; drv_id < USBH_CLASS_DRIVER_COUNT; drv_id++) { - usbh_class_drivers[drv_id].close(daddr); + for (uint8_t drv_id = 0; drv_id < _total_driver_count; drv_id++) + { + usbh_class_driver_t const * driver = usbh_get_driver(drv_id); + if ( driver ) + { + driver->close(daddr); + } } - hcd_device_close(rhport, daddr); clear_device(dev); // abort on-going control xfer if any @@ -1643,11 +1679,12 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur TU_ASSERT(drv_len >= sizeof(tusb_desc_interface_t)); // Find driver for this interface - for (uint8_t drv_id = 0; drv_id < USBH_CLASS_DRIVER_COUNT; drv_id++) + uint8_t drv_id = 0; + for (; drv_id < _total_driver_count; drv_id++) { - usbh_class_driver_t const * driver = &usbh_class_drivers[drv_id]; + usbh_class_driver_t const * driver = usbh_get_driver(drv_id); - if ( driver->open(dev->rhport, dev_addr, desc_itf, drv_len) ) + if (driver && driver->open(dev->rhport, dev_addr, desc_itf, drv_len) ) { // open successfully TU_LOG_USBH(" %s opened\r\n", driver->name); @@ -1668,11 +1705,12 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur break; // exit driver find loop } - if( drv_id >= USBH_CLASS_DRIVER_COUNT ) - { - TU_LOG(CFG_TUH_LOG_LEVEL, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", - desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); - } + } + + if( drv_id >= _total_driver_count ) + { + TU_LOG(CFG_TUH_LOG_LEVEL, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", + desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); } // next Interface or IAD descriptor @@ -1694,7 +1732,7 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) uint8_t const drv_id = dev->itf2drv[itf_num]; if (drv_id != TUSB_INDEX_INVALID_8) { - usbh_class_driver_t const * driver = &usbh_class_drivers[drv_id]; + usbh_class_driver_t const * driver = usbh_get_driver(drv_id); TU_LOG_USBH("%s set config: itf = %u\r\n", driver->name, itf_num); driver->set_config(dev_addr, itf_num); break; diff --git a/src/host/usbh_classdriver.h b/src/host/usbh_classdriver.h index 308b4418a..7443b2d90 100644 --- a/src/host/usbh_classdriver.h +++ b/src/host/usbh_classdriver.h @@ -96,6 +96,14 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr); // Check if endpoint transferring is complete bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr); +//--------------------------------------------------------------------+ +// USBH application additional driver API +//--------------------------------------------------------------------+ +// Invoked when initializing host stack to get additional class drivers. +// Can optionally implemented by application to extend/overwrite class driver support. +// Note: The drivers array must be accessible at all time when stack is active +usbh_class_driver_t const* usbh_app_driver_get_cb(uint8_t* driver_count) TU_ATTR_WEAK; + #ifdef __cplusplus } #endif -- cgit v1.3.1 From 1b33a315365184a74a8b5bbce5fdbdfc4dfe6f69 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 15 Aug 2023 22:51:21 +0700 Subject: more minor clean up - also rename usbh_classdriver.h to usbh_pvt.h to consitent with usbd --- src/class/cdc/cdc_host.c | 2 +- src/class/hid/hid_host.c | 2 +- src/class/msc/msc_host.c | 2 +- src/device/usbd.c | 31 +++++-------- src/device/usbd_pvt.h | 2 +- src/host/hub.c | 2 +- src/host/usbh.c | 84 ++++++++++++++++----------------- src/host/usbh_classdriver.h | 111 -------------------------------------------- src/host/usbh_pvt.h | 108 ++++++++++++++++++++++++++++++++++++++++++ src/tusb.c | 2 +- 10 files changed, 164 insertions(+), 182 deletions(-) delete mode 100644 src/host/usbh_classdriver.h create mode 100644 src/host/usbh_pvt.h (limited to 'src') diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 40ebd331d..53e15710e 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -29,7 +29,7 @@ #if (CFG_TUH_ENABLED && CFG_TUH_CDC) #include "host/usbh.h" -#include "host/usbh_classdriver.h" +#include "host/usbh_pvt.h" #include "cdc_host.h" diff --git a/src/class/hid/hid_host.c b/src/class/hid/hid_host.c index 4253170d4..a3551c85a 100644 --- a/src/class/hid/hid_host.c +++ b/src/class/hid/hid_host.c @@ -29,7 +29,7 @@ #if (CFG_TUH_ENABLED && CFG_TUH_HID) #include "host/usbh.h" -#include "host/usbh_classdriver.h" +#include "host/usbh_pvt.h" #include "hid_host.h" diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index 90a58d3d0..da264142c 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -29,7 +29,7 @@ #if CFG_TUH_ENABLED && CFG_TUH_MSC #include "host/usbh.h" -#include "host/usbh_classdriver.h" +#include "host/usbh_pvt.h" #include "msc_host.h" diff --git a/src/device/usbd.c b/src/device/usbd.c index 156b92ce1..f0d9fba52 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -238,34 +238,25 @@ enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(_usbd_driver) }; tu_static usbd_class_driver_t const * _app_driver = NULL; tu_static uint8_t _app_driver_count = 0; +#define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) + // virtually joins built-in and application drivers together. // Application is positioned first to allow overwriting built-in ones. static inline usbd_class_driver_t const * get_driver(uint8_t drvid) { - // Application drivers - if ( usbd_app_driver_get_cb ) - { - if ( drvid < _app_driver_count ) return &_app_driver[drvid]; - drvid -= _app_driver_count; - } - - // when there is no built-in drivers BUILTIN_DRIVER_COUNT = 0 will cause -Wtype-limits warning -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wtype-limits" -#endif - - // Built-in drivers - if (drvid < BUILTIN_DRIVER_COUNT) return &_usbd_driver[drvid]; + usbd_class_driver_t const * driver = NULL; -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif + if ( drvid < _app_driver_count ) { + // Application drivers + driver = &_app_driver[drvid]; + } else if ( drvid < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0 ){ + driver = &_usbd_driver[drvid - _app_driver_count]; + } - return NULL; + return driver; } -#define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) + //--------------------------------------------------------------------+ // DCD Event diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 940b2858b..16585167f 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -59,7 +59,7 @@ typedef struct } usbd_class_driver_t; // Invoked when initializing device stack to get additional class drivers. -// Can optionally implemented by application to extend/overwrite class driver support. +// Can be implemented by application to extend/overwrite class driver support. // Note: The drivers array must be accessible at all time when stack is active usbd_class_driver_t const* usbd_app_driver_get_cb(uint8_t* driver_count) TU_ATTR_WEAK; diff --git a/src/host/hub.c b/src/host/hub.c index ec30eb96a..32f5e0ac7 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -30,7 +30,7 @@ #include "hcd.h" #include "usbh.h" -#include "usbh_classdriver.h" +#include "usbh_pvt.h" #include "hub.h" // Debug level, TUSB_CFG_DEBUG must be at least this level for debug message diff --git a/src/host/usbh.c b/src/host/usbh.c index af8142be3..739157b56 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -30,7 +30,7 @@ #include "host/hcd.h" #include "tusb.h" -#include "host/usbh_classdriver.h" +#include "host/usbh_pvt.h" #include "hub.h" //--------------------------------------------------------------------+ @@ -183,6 +183,23 @@ static usbh_class_driver_t const usbh_class_drivers[] = enum { USBH_BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; enum { CONFIG_NUM = 1 }; // default to use configuration 1 +// Additional class drivers implemented by application +tu_static usbh_class_driver_t const * _app_driver = NULL; +tu_static uint8_t _app_driver_count = 0; + +#define TOTAL_DRIVER_COUNT (_app_driver_count + USBH_BUILTIN_DRIVER_COUNT) + +static inline usbh_class_driver_t const *get_driver(uint8_t drv_id) { + usbh_class_driver_t const *driver = NULL; + + if ( drv_id < _app_driver_count ) { + driver = &_app_driver[drv_id]; + } else if ( drv_id < TOTAL_DRIVER_COUNT && USBH_BUILTIN_DRIVER_COUNT > 0) { + driver = &usbh_class_drivers[drv_id - _app_driver_count]; + } + + return driver; +} //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION @@ -246,21 +263,6 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size); static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); -// Additional class drivers implemented by application -tu_static usbh_class_driver_t const * _app_driver = NULL; -tu_static uint8_t _app_driver_count = 0; -tu_static uint8_t _total_driver_count = USBH_BUILTIN_DRIVER_COUNT; - -static usbh_class_driver_t const * usbh_get_driver(uint8_t drv_id) -{ - usbh_class_driver_t const * driver = NULL; - if ( drv_id < _app_driver_count ) - driver = &_app_driver[drv_id]; - else if ( drv_id < _total_driver_count ) - driver = &usbh_class_drivers[drv_id - _app_driver_count]; - return driver; -} - #if CFG_TUSB_OS == OPT_OS_NONE // TODO rework time-related function later // weak and overridable @@ -354,11 +356,10 @@ bool tuh_init(uint8_t controller_id) { _usbh_mutex = osal_mutex_create(&_usbh_mutexdef); TU_ASSERT(_usbh_mutex); #endif + // Get application driver if available - if ( usbh_app_driver_get_cb ) - { + if ( usbh_app_driver_get_cb ) { _app_driver = usbh_app_driver_get_cb(&_app_driver_count); - _total_driver_count = USBH_BUILTIN_DRIVER_COUNT + _app_driver_count; } // Device @@ -372,9 +373,9 @@ bool tuh_init(uint8_t controller_id) { } // Class drivers - for (uint8_t drv_id = 0; drv_id < _total_driver_count; drv_id++) + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { - usbh_class_driver_t const * driver = usbh_get_driver(drv_id); + usbh_class_driver_t const * driver = get_driver(drv_id); if ( driver ) { TU_LOG_USBH("%s init\r\n", driver->name); @@ -508,12 +509,12 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { #endif { uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; - usbh_class_driver_t const * driver = usbh_get_driver(drv_id); + usbh_class_driver_t const * driver = get_driver(drv_id); if ( driver ) { TU_LOG_USBH("%s xfer callback\r\n", driver->name); driver->xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, - event.xfer_complete.len); + event.xfer_complete.len); } else { @@ -1220,12 +1221,10 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu // hub_addr = 0 means roothub, hub_port = 0 means all devices of downstream hub if (dev->rhport == rhport && dev->connected && (hub_addr == 0 || dev->hub_addr == hub_addr) && - (hub_port == 0 || dev->hub_port == hub_port)) - { + (hub_port == 0 || dev->hub_port == hub_port)) { TU_LOG_USBH("Device unplugged address = %u\r\n", daddr); - if (is_hub_addr(daddr)) - { + if (is_hub_addr(daddr)) { TU_LOG(CFG_TUH_LOG_LEVEL, " is a HUB device %u\r\n", daddr); // Submit removed event If the device itself is a hub (un-rolled recursive) @@ -1243,14 +1242,11 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu } // Close class driver - for (uint8_t drv_id = 0; drv_id < _total_driver_count; drv_id++) - { - usbh_class_driver_t const * driver = usbh_get_driver(drv_id); - if ( driver ) - { - driver->close(daddr); - } + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { + usbh_class_driver_t const * driver = get_driver(drv_id); + if ( driver ) driver->close(daddr); } + hcd_device_close(rhport, daddr); clear_device(dev); // abort on-going control xfer if any @@ -1679,10 +1675,9 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur TU_ASSERT(drv_len >= sizeof(tusb_desc_interface_t)); // Find driver for this interface - uint8_t drv_id = 0; - for (; drv_id < _total_driver_count; drv_id++) + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { - usbh_class_driver_t const * driver = usbh_get_driver(drv_id); + usbh_class_driver_t const * driver = get_driver(drv_id); if (driver && driver->open(dev->rhport, dev_addr, desc_itf, drv_len) ) { @@ -1705,12 +1700,11 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur break; // exit driver find loop } - } - - if( drv_id >= _total_driver_count ) - { - TU_LOG(CFG_TUH_LOG_LEVEL, "Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", - desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); + if ( drv_id == TOTAL_DRIVER_COUNT - 1 ) + { + TU_LOG(CFG_TUH_LOG_LEVEL, "[%u:%u] Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", + dev->rhport, dev_addr, desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); + } } // next Interface or IAD descriptor @@ -1730,9 +1724,9 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) // IAD binding interface such as CDCs should return itf_num + 1 when complete // with usbh_driver_set_config_complete() uint8_t const drv_id = dev->itf2drv[itf_num]; - if (drv_id != TUSB_INDEX_INVALID_8) + usbh_class_driver_t const * driver = get_driver(drv_id); + if (driver) { - usbh_class_driver_t const * driver = usbh_get_driver(drv_id); TU_LOG_USBH("%s set config: itf = %u\r\n", driver->name, itf_num); driver->set_config(dev_addr, itf_num); break; diff --git a/src/host/usbh_classdriver.h b/src/host/usbh_classdriver.h deleted file mode 100644 index 7443b2d90..000000000 --- a/src/host/usbh_classdriver.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef _TUSB_USBH_CLASSDRIVER_H_ -#define _TUSB_USBH_CLASSDRIVER_H_ - -#include "osal/osal.h" -#include "common/tusb_fifo.h" -#include "common/tusb_private.h" - -#ifdef __cplusplus - extern "C" { -#endif - -// Level where CFG_TUSB_DEBUG must be at least for USBH is logged -#ifndef CFG_TUH_LOG_LEVEL - #define CFG_TUH_LOG_LEVEL 2 -#endif - -#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) - -enum { - USBH_EPSIZE_BULK_MAX = (TUH_OPT_HIGH_SPEED ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS) -}; - -//--------------------------------------------------------------------+ -// Class Driver API -//--------------------------------------------------------------------+ - -typedef struct { - #if CFG_TUSB_DEBUG >= 2 - char const* name; - #endif - - void (* const init )(void); - bool (* const open )(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const * itf_desc, uint16_t max_len); - bool (* const set_config )(uint8_t dev_addr, uint8_t itf_num); - bool (* const xfer_cb )(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); - void (* const close )(uint8_t dev_addr); -} usbh_class_driver_t; - -// Call by class driver to tell USBH that it has complete the enumeration -void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num); - -uint8_t usbh_get_rhport(uint8_t dev_addr); - -uint8_t* usbh_get_enum_buf(void); - -void usbh_int_set(bool enabled); - -//--------------------------------------------------------------------+ -// USBH Endpoint API -//--------------------------------------------------------------------+ - -// Submit a usb transfer with callback support, require CFG_TUH_API_EDPT_XFER -bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, - tuh_xfer_cb_t complete_cb, uintptr_t user_data); - -TU_ATTR_ALWAYS_INLINE -static inline bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ - return usbh_edpt_xfer_with_callback(dev_addr, ep_addr, buffer, total_bytes, NULL, 0); -} - - -// Claim an endpoint before submitting a transfer. -// If caller does not make any transfer, it must release endpoint for others. -bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr); - -// Release claimed endpoint without submitting a transfer -bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr); - -// Check if endpoint transferring is complete -bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr); - -//--------------------------------------------------------------------+ -// USBH application additional driver API -//--------------------------------------------------------------------+ -// Invoked when initializing host stack to get additional class drivers. -// Can optionally implemented by application to extend/overwrite class driver support. -// Note: The drivers array must be accessible at all time when stack is active -usbh_class_driver_t const* usbh_app_driver_get_cb(uint8_t* driver_count) TU_ATTR_WEAK; - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h new file mode 100644 index 000000000..0b58a91bc --- /dev/null +++ b/src/host/usbh_pvt.h @@ -0,0 +1,108 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _TUSB_USBH_CLASSDRIVER_H_ +#define _TUSB_USBH_CLASSDRIVER_H_ + +#include "osal/osal.h" +#include "common/tusb_fifo.h" +#include "common/tusb_private.h" + +#ifdef __cplusplus + extern "C" { +#endif + +// Level where CFG_TUSB_DEBUG must be at least for USBH is logged +#ifndef CFG_TUH_LOG_LEVEL + #define CFG_TUH_LOG_LEVEL 2 +#endif + +#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) + +enum { + USBH_EPSIZE_BULK_MAX = (TUH_OPT_HIGH_SPEED ? TUSB_EPSIZE_BULK_HS : TUSB_EPSIZE_BULK_FS) +}; + +//--------------------------------------------------------------------+ +// Class Driver API +//--------------------------------------------------------------------+ + +typedef struct { + #if CFG_TUSB_DEBUG >= 2 + char const* name; + #endif + + void (* const init )(void); + bool (* const open )(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const * itf_desc, uint16_t max_len); + bool (* const set_config )(uint8_t dev_addr, uint8_t itf_num); + bool (* const xfer_cb )(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); + void (* const close )(uint8_t dev_addr); +} usbh_class_driver_t; + +// Invoked when initializing host stack to get additional class drivers. +// Can be implemented by application to extend/overwrite class driver support. +// Note: The drivers array must be accessible at all time when stack is active +usbh_class_driver_t const* usbh_app_driver_get_cb(uint8_t* driver_count) TU_ATTR_WEAK; + +// Call by class driver to tell USBH that it has complete the enumeration +void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num); + +uint8_t usbh_get_rhport(uint8_t dev_addr); + +uint8_t* usbh_get_enum_buf(void); + +void usbh_int_set(bool enabled); + +//--------------------------------------------------------------------+ +// USBH Endpoint API +//--------------------------------------------------------------------+ + +// Submit a usb transfer with callback support, require CFG_TUH_API_EDPT_XFER +bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, + tuh_xfer_cb_t complete_cb, uintptr_t user_data); + +TU_ATTR_ALWAYS_INLINE +static inline bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) +{ + return usbh_edpt_xfer_with_callback(dev_addr, ep_addr, buffer, total_bytes, NULL, 0); +} + + +// Claim an endpoint before submitting a transfer. +// If caller does not make any transfer, it must release endpoint for others. +bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr); + +// Release claimed endpoint without submitting a transfer +bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr); + +// Check if endpoint transferring is complete +bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr); + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/src/tusb.c b/src/tusb.c index 465b608b0..7b0a669a0 100644 --- a/src/tusb.c +++ b/src/tusb.c @@ -36,7 +36,7 @@ #endif #if CFG_TUH_ENABLED -#include "host/usbh_classdriver.h" +#include "host/usbh_pvt.h" #endif //--------------------------------------------------------------------+ -- cgit v1.3.1 From 67a374d932cbe14bf1651bdd6fea82c2e2ecfa10 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 15 Aug 2023 22:57:05 +0700 Subject: more rename --- src/host/usbh.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'src') diff --git a/src/host/usbh.c b/src/host/usbh.c index 739157b56..7cdcbda5e 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -180,21 +180,21 @@ static usbh_class_driver_t const usbh_class_drivers[] = #endif }; -enum { USBH_BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; +enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; enum { CONFIG_NUM = 1 }; // default to use configuration 1 // Additional class drivers implemented by application tu_static usbh_class_driver_t const * _app_driver = NULL; tu_static uint8_t _app_driver_count = 0; -#define TOTAL_DRIVER_COUNT (_app_driver_count + USBH_BUILTIN_DRIVER_COUNT) +#define TOTAL_DRIVER_COUNT (_app_driver_count + BUILTIN_DRIVER_COUNT) static inline usbh_class_driver_t const *get_driver(uint8_t drv_id) { usbh_class_driver_t const *driver = NULL; if ( drv_id < _app_driver_count ) { driver = &_app_driver[drv_id]; - } else if ( drv_id < TOTAL_DRIVER_COUNT && USBH_BUILTIN_DRIVER_COUNT > 0) { + } else if ( drv_id < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0) { driver = &usbh_class_drivers[drv_id - _app_driver_count]; } -- cgit v1.3.1 From b3c7fe1023d14d1e07eb21ca9a61438bff49a788 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 15 Aug 2023 00:09:31 +0700 Subject: clear qhd halted bit if not caused by STALL protocol, allow for next transfer --- src/portable/ehci/ehci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'src') diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index 79811985c..c5036b5a3 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -579,6 +579,7 @@ void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { if (qtd_overlay->xact_err || qtd_overlay->err_count == 0 || qtd_overlay->buffer_err || qtd_overlay->babble_err) { // Error count = 0 often occurs when device disconnected, or other bus-related error xfer_result = XFER_RESULT_FAILED; + qtd_overlay->halted = false; // clear halted bit if it is not caused by STALL TU_LOG3(" QHD xfer err count: %d\n", qtd_overlay->err_count); // TU_BREAKPOINT(); // TODO skip unplugged device }else { -- cgit v1.3.1 From 0109ffbdcb22a358ecbc1476fbfb4e370e5bb4cc Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 16 Aug 2023 14:31:14 +0700 Subject: fix abort transfer does not release endpoint, also reset state if it is control transfer --- src/host/usbh.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'src') diff --git a/src/host/usbh.c b/src/host/usbh.c index 7cdcbda5e..5423df669 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -738,19 +738,27 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { usbh_device_t* dev = get_device(daddr); TU_VERIFY(dev); + TU_LOG_USBH("[%u] Aborted transfer on EP %02X\r\n", daddr, ep_addr); + uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const dir = tu_edpt_dir(ep_addr); - // skip if not busy - TU_VERIFY(dev->ep_status[epnum][dir].busy); - - bool const ret = hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr); - if (ret) { - // mark as ready if transfer is aborted + if ( epnum == 0 ) { + // control transfer: only 1 control at a time, check if we are aborting the current one + TU_VERIFY(daddr == _ctrl_xfer.daddr && _ctrl_xfer.stage != CONTROL_STAGE_IDLE); + TU_VERIFY(hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr)); + // reset control transfer state to idle + _set_control_xfer_stage(CONTROL_STAGE_IDLE); + } else { + // non-control skip if not busy + TU_VERIFY(dev->ep_status[epnum][dir].busy); + TU_VERIFY(hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr)); + // mark as ready and release endpoint if transfer is aborted dev->ep_status[epnum][dir].busy = false; + usbh_edpt_release(daddr, ep_addr); } - return ret; + return true; } //--------------------------------------------------------------------+ -- cgit v1.3.1 From f4845e4e6cc2faca4e60cd83959850f27d3f3076 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 16 Aug 2023 14:43:58 +0700 Subject: minor comment --- src/portable/ehci/ehci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'src') diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index c5036b5a3..c93c33fc0 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -578,8 +578,9 @@ void qhd_xfer_complete_isr(ehci_qhd_t * qhd) { if ( qtd_overlay->halted ) { if (qtd_overlay->xact_err || qtd_overlay->err_count == 0 || qtd_overlay->buffer_err || qtd_overlay->babble_err) { // Error count = 0 often occurs when device disconnected, or other bus-related error + // clear halted bit if not caused by STALL to allow more transfer xfer_result = XFER_RESULT_FAILED; - qtd_overlay->halted = false; // clear halted bit if it is not caused by STALL + qtd_overlay->halted = false; TU_LOG3(" QHD xfer err count: %d\n", qtd_overlay->err_count); // TU_BREAKPOINT(); // TODO skip unplugged device }else { -- cgit v1.3.1