From e209acb8d3624d3e6e6b6cee827bf4a97a4b138c Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Mon, 30 Sep 2024 10:58:19 +0700 Subject: Migrate hil vm (#2822) * migrate hil to new x64 VM instead of rpi * re-enable hil for s3 --- test/hil/tinyusb.json | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 test/hil/tinyusb.json (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json new file mode 100644 index 000000000..fcd004c6d --- /dev/null +++ b/test/hil/tinyusb.json @@ -0,0 +1,107 @@ +{ + "boards": [ + { + "name": "feather_nrf52840_express", + "uid": "1F0479CD0F764471", + "flasher": "jlink", + "flasher_sn": "000682804350", + "flasher_args": "-device nrf52840_xxaa" + }, + { + "name": "metro_m4_express", + "uid": "9995AD485337433231202020FF100A34", + "flasher": "jlink", + "flasher_sn": "123456", + "flasher_args": "-device ATSAMD51J19", + "tests": { + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] + } + }, + { + "name": "max32666fthr", + "uid": "0C81464124010B20FF0A08CC2C", + "flasher": "openocd_adi", + "flasher_sn": "E6614C311B597D32", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + }, + { + "name": "lpcxpresso11u37", + "uid": "17121919", + "flasher": "jlink", + "flasher_sn": "000724441579", + "flasher_args": "-device LPC11U37/401" + }, + { + "name": "ra4m1_ek", + "uid": "152E163038303131393346E46F26574B", + "tests": { + "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] + }, + "comment": "MSC is slow to enumerated #2602", + "flasher": "jlink", + "flasher_sn": "000831174392", + "flasher_args": "-device R7FA4M1AB" + }, + { + "name": "raspberry_pi_pico", + "uid": "E6614C311B764A37", + "flasher": "openocd", + "flasher_sn": "E6614103E72C1D2F", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", + "tests": { + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] + } + }, + { + "name": "raspberry_pi_pico2", + "uid": "560AE75E1C7152C9", + "flasher": "openocd", + "flasher_sn": "E6633861A3978538", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", + "tests": { + "skip": ["dual/host_info_to_device_cdc"], + "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] + } + }, + { + "name": "stm32f072disco", + "uid": "3A001A001357364230353532", + "flasher": "jlink", + "flasher_sn": "779541626", + "flasher_args": "-device stm32f072rb" + }, + { + "name": "stm32g0b1nucleo", + "uid": "4D0038000450434E37343120", + "flasher": "openocd", + "flasher_sn": "066FFF495087534867063844", + "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + }, + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + }, + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 921600" + } + ], + "boards-skip": [ + { + "name": "mimxrt1015_evk", + "uid": "DC28F865D2111D228D00B0543A70463C", + "flasher": "jlink", + "flasher_sn": "000726284213", + "flasher_args": "-device MIMXRT1015DAF5A" + }, + { + "name": "nanoch32v203", + "uid": "CDAB277B0FBC03E339E339E3", + "flasher": "openocd_wch", + "flasher_sn": "EBCA8F0670AF", + "flasher_args": "" + } + ] +} -- cgit v1.3.1 From d6c8719bcb1607e6b0c668f15655de483e15f02e Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 30 Sep 2024 23:16:53 +0700 Subject: temporarily update hil_test.py to have dual/host_info_to_device_cdc optional for pico/pico2 since it does not seem to be stable enough --- test/hil/hil_test.py | 13 +++++++++---- test/hil/tinyusb.json | 1 - 2 files changed, 9 insertions(+), 5 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 2d14220c5..f152b1aa9 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -240,8 +240,13 @@ def test_dual_host_info_to_device_cdc(board): print(f'\r\n {l} ', end='') enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') - assert(set(declared_devs) == set(enum_dev_sn)), \ - f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' + if set(declared_devs) != set(enum_dev_sn): + # for pico/pico2 make this test optional + failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' + if 'raspberry_pi_pico' in board['name']: + print(f'\r\n {failed_msg} ', end='') + else: + assert False, failed_msg return 0 @@ -405,6 +410,8 @@ def test_board(board): if 'tests' in board: board_tests = board['tests'] + if 'dual_attached' in board_tests: + test_list += dual_tests if 'only' in board_tests: test_list = board_tests['only'] if 'skip' in board_tests: @@ -412,8 +419,6 @@ def test_board(board): if skip in test_list: test_list.remove(skip) print(f'{name:25} {skip:30} ... Skip') - if 'dual_attached' in board_tests: - test_list += dual_tests # board_test is added last to disable board's usb test_list.append('device/board_test') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index fcd004c6d..066dc5876 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -59,7 +59,6 @@ "flasher_sn": "E6633861A3978538", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { - "skip": ["dual/host_info_to_device_cdc"], "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] } }, -- cgit v1.3.1 From 072a80d088c5c74a97b9ac525c6c7f7c53627ccb Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 16:02:46 +0700 Subject: hil test both slave and dma for dwc2 esp32s3 --- .github/workflows/hil_test.yml | 2 +- test/hil/hil_ci_set_matrix.py | 3 ++- test/hil/tinyusb.json | 1 + 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 579e935ac..d5f4e4fdd 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -58,7 +58,7 @@ jobs: # --------------------------------------- # Hardware in the loop (HIL) - # self-hosted running on an VM. For attached hardware checkout test/hil/tinyusb.json + # self-hosted running on an VM. For attached hardware checkout HIL_JSON # --------------------------------------- hil-tinyusb: if: github.repository_owner == 'hathach' diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py index 56952eab3..d1329f035 100644 --- a/test/hil/hil_ci_set_matrix.py +++ b/test/hil/hil_ci_set_matrix.py @@ -2,6 +2,7 @@ import argparse import json import os + def main(): parser = argparse.ArgumentParser() parser.add_argument('config_file', help='Configuration JSON file') @@ -31,7 +32,7 @@ def main(): if f == '': matrix[toolchain].append(f'-b {name}') else: - matrix[toolchain].append(f'-b {name}-{f.replace(" ", "_")}') + matrix[toolchain].append(f'-b {name} -f1 {f.replace(" ", " -f1 ")}') else: matrix[toolchain].append(f'-b {name}') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 066dc5876..7627e7482 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -79,6 +79,7 @@ { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", + "build_flags_on": ["", "CFG_TUD_DWC2_DMA"], "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, -- cgit v1.3.1 From 7cdab1c94b2a218928691dbca8cb9290bb31ecc9 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 16:33:58 +0700 Subject: enable dma hil test with hfp.json --- test/hil/hfp.json | 1 + test/hil/hil_ci_set_matrix.py | 4 ++-- test/hil/tinyusb.json | 4 +++- 3 files changed, 6 insertions(+), 3 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/hfp.json b/test/hil/hfp.json index e79a3cfc9..386d9816b 100644 --- a/test/hil/hfp.json +++ b/test/hil/hfp.json @@ -10,6 +10,7 @@ { "name": "stm32f746disco", "uid": "210041000C51343237303334", + "build_flags_on": ["", "CFG_TUD_DWC2_DMA"], "flasher": "jlink", "flasher_sn": "770935966", "flasher_args": "-device STM32F746NG" diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py index d1329f035..192174e16 100644 --- a/test/hil/hil_ci_set_matrix.py +++ b/test/hil/hil_ci_set_matrix.py @@ -27,8 +27,8 @@ def main(): else: toolchain = 'arm-gcc' - if 'build_flags_on' in board: - for f in board['build_flags_on']: + if 'build' in board and 'flags_on' in board['build']: + for f in board['build']['flags_on']: if f == '': matrix[toolchain].append(f'-b {name}') else: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 7627e7482..1eaa08207 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -79,7 +79,9 @@ { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", - "build_flags_on": ["", "CFG_TUD_DWC2_DMA"], + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, -- cgit v1.3.1 From b2a98eadabf3b48f3d9316b32444f0b9cfbc2d1f Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Oct 2024 22:21:08 +0700 Subject: add stm32f769disco to hil pool --- src/portable/synopsys/dwc2/dcd_dwc2.c | 2 +- test/hil/tinyusb.json | 36 ++++++++++++++++++++++------------- 2 files changed, 24 insertions(+), 14 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 4fa869241..210ce1bba 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -637,7 +637,7 @@ static void phy_hs_init(dwc2_regs_t* dwc2) { static bool check_dwc2(dwc2_regs_t* dwc2) { #if CFG_TUSB_DEBUG >= DWC2_DEBUG // print guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4 - // Run 'dwc2_info.py render-md' and check dwc2_info.md for bit-field value and comparison with other ports + // Run 'python dwc2_info.py' and check dwc2_info.md for bit-field value and comparison with other ports volatile uint32_t const* p = (volatile uint32_t const*) &dwc2->guid; TU_LOG1("guid, gsnpsid, ghwcfg1, ghwcfg2, ghwcfg3, ghwcfg4\r\n"); for (size_t i = 0; i < 5; i++) { diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 1eaa08207..2358c3c4f 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -1,5 +1,18 @@ { "boards": [ + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + }, + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 1500000" + }, { "name": "feather_nrf52840_express", "uid": "1F0479CD0F764471", @@ -69,25 +82,22 @@ "flasher_sn": "779541626", "flasher_args": "-device stm32f072rb" }, + { + "name": "stm32f769disco", + "uid": "21002F000F51363531383437", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "flasher": "jlink", + "flasher_sn": "000778170924", + "flasher_args": "-device stm32f769ni" + }, { "name": "stm32g0b1nucleo", "uid": "4D0038000450434E37343120", "flasher": "openocd", "flasher_sn": "066FFF495087534867063844", "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" - }, - { - "name": "espressif_s3_devkitm", - "uid": "84F703C084E4", - "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] - }, - "tests": { - "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] - }, - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 921600" } ], "boards-skip": [ -- cgit v1.3.1 From 07c14f30a6d6cfb1758e3496c3ea73275ae4a062 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 8 Oct 2024 12:36:45 +0700 Subject: add f407disco to hil pool --- hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake | 16 ++ hw/bsp/stm32h7/boards/stm32h750_weact/board.h | 132 ++++++++++++++++ hw/bsp/stm32h7/boards/stm32h750_weact/board.mk | 21 +++ .../stm32h750_weact/stm32h750xx_flash_CM7.ld | 170 +++++++++++++++++++++ hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake | 2 +- hw/bsp/stm32h7/boards/stm32h750bdk/board.mk | 2 +- hw/bsp/stm32h7/family.c | 12 +- src/portable/synopsys/dwc2/dwc2_info.md | 116 +++++++------- src/portable/synopsys/dwc2/dwc2_info.py | 23 +-- test/hil/hil_test.py | 2 +- test/hil/tinyusb.json | 24 ++- 11 files changed, 438 insertions(+), 82 deletions(-) create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/board.h create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/board.mk create mode 100644 hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld (limited to 'test/hil/tinyusb.json') diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake new file mode 100644 index 000000000..6303ca462 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.cmake @@ -0,0 +1,16 @@ +set(MCU_VARIANT stm32h750xx) +set(JLINK_DEVICE stm32h750vb) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${MCU_VARIANT}_flash_CM7.ld) +set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32H750xx + HSE_VALUE=25000000 + CORE_CM7 + # default to PORT 0 + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + ) +endfunction() diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.h b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h new file mode 100644 index 000000000..d117637a5 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.h @@ -0,0 +1,132 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_3 +#define LED_STATE_ON 1 + +// Blue push-button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART +//#define UART_DEV USART3 +//#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +//#define UART_GPIO_PORT GPIOB +//#define UART_GPIO_AF GPIO_AF7_USART3 +//#define UART_TX_PIN GPIO_PIN_10 +//#define UART_RX_PIN GPIO_PIN_11 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void SystemClock_Config(void) { + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + // Supply configuration update enable + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + + // Configure the main internal regulator output voltage + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2); + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} + + // Configure the PLL clock source + __HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE); + + // Initializes the CPU, AHB and APB busses clocks + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 96; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + // Initializes the CPU, AHB and APB busses clocks + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 + |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV1; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_SPI4 + |RCC_PERIPHCLK_SPI1|RCC_PERIPHCLK_USB + |RCC_PERIPHCLK_QSPI; + PeriphClkInitStruct.PLL3.PLL3M = 10; + PeriphClkInitStruct.PLL3.PLL3N = 96; + PeriphClkInitStruct.PLL3.PLL3P = 5; + PeriphClkInitStruct.PLL3.PLL3Q = 5; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_1; + PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOWIDE; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK; + PeriphClkInitStruct.Spi123ClockSelection = RCC_SPI123CLKSOURCE_PLL; + PeriphClkInitStruct.Spi45ClockSelection = RCC_SPI45CLKSOURCE_D2PCLK1; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + // Enable USB Voltage detector + HAL_PWREx_EnableUSBVoltageDetector(); +} + +static inline void board_stm32h7_post_init(void) { + // For this board does nothing +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk new file mode 100644 index 000000000..a50172cb0 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/board.mk @@ -0,0 +1,21 @@ +# STM32H745I-DISCO uses OTG_FS +# FIXME: Reset enumerates, un/replug USB plug does not enumerate + +CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=25000000 + +# Default is FulSpeed port +PORT ?= 0 + +# GCC +SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s +LD_FILE_GCC = $(BOARD_PATH)/stm32h750xx_flash_CM7.ld + +# IAR +SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s +LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf + +# For flash-jlink target +JLINK_DEVICE = stm32h750vb + +# flash target using on-board stlink +flash: flash-jlink diff --git a/hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld b/hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld new file mode 100644 index 000000000..30f220a42 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h750_weact/stm32h750xx_flash_CM7.ld @@ -0,0 +1,170 @@ +/* +****************************************************************************** +** + +** File : LinkerScript.ld +** +** +** Abstract : Linker script for STM32H7 series +** 128Kbytes FLASH and 1Mbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed �as is,� without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +** Copyright (c) 2019 STMicroelectronics. +** All rights reserved. +** +** This software component is licensed by ST under BSD 3-Clause license, +** the "License"; You may not use this file except in compliance with the +** License. You may obtain a copy of the License at: +** opensource.org/licenses/BSD-3-Clause +** +**************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K +RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 1M +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake index 6eff708a8..e87be8255 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.cmake @@ -1,5 +1,5 @@ set(MCU_VARIANT stm32h750xx) -set(JLINK_DEVICE stm32h750xb_m7) +set(JLINK_DEVICE stm32h750xb) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${MCU_VARIANT}_flash_CM7.ld) set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) diff --git a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk index d37a425fb..923c90753 100644 --- a/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h750bdk/board.mk @@ -15,7 +15,7 @@ SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf # For flash-jlink target -JLINK_DEVICE = stm32h750xb_m7 +JLINK_DEVICE = stm32h750xb # flash target using on-board stlink flash: flash-stlink diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index adeb38e74..c81437958 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -102,9 +102,6 @@ void board_init(void) { trace_etm_init(); - // Enable UART Clock - UART_CLK_EN(); - #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); @@ -136,7 +133,10 @@ void board_init(void) { GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); +#ifdef UART_DEV // Uart + UART_CLK_EN(); + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; @@ -153,6 +153,7 @@ void board_init(void) { UartHandle.Init.Mode = UART_MODE_TX_RX; UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); +#endif #if BOARD_TUD_RHPORT == 0 // Despite being call USB2_OTG @@ -280,8 +281,13 @@ int board_uart_read(uint8_t *buf, int len) { } int board_uart_write(void const *buf, int len) { +#ifdef UART_DEV HAL_UART_Transmit(&UartHandle, (uint8_t * )(uintptr_t) buf, len, 0xffff); +#else + (void) buf; +#endif + return len; } diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 5c7e5e688..cfd0c81a8 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG FS | ESP32-S2/S3 | ESP32-P4 | ST F407/411/429 FS | ST F407/429 HS | ST F412/767 FS | ST F723 FS | ST F723 HS | ST F769 | ST H743 HS | ST L476 FS | ST U5A5 HS | GD32VF103 FS | XMC4500 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:---------------------|:-----------------|:-----------------|:-------------|:-------------|:-------------|:-------------|:-------------|:-------------|:---------------|:-------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | -| - p2p (hub support) | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 0 | 13 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 2 | 2 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - ptx_q_depth | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 0 | 634 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/767 FS | ST F723/L4P5 FS | ST F723 HS | ST F769 | ST H743/H750 | ST L476 FS | ST U5A5 HS | GD32VF103 | XMC4500 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:------------|:-------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | +| - p2p (hub support) | 0 | 0 | 1 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 0 | 13 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 2 | 2 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - ptx_q_depth | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 0 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 0 | 634 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index ac32eb585..d1793a005 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -10,20 +10,21 @@ import pandas as pd dwc2_reg_list = ['GUID', 'GSNPSID', 'GHWCFG1', 'GHWCFG2', 'GHWCFG3', 'GHWCFG4'] dwc2_reg_value = { 'BCM2711 (Pi4)': [0x2708A000, 0x4F54280A, 0, 0x228DDD50, 0xFF000E8, 0x1FF00020], - 'EFM32GG FS': [0, 0x4F54330A, 0, 0x228F5910, 0x1F204E8, 0x1BF08030], - 'ESP32-S2/S3': [0, 0x4F54400A, 0, 0x224DD930, 0xC804B5, 0xD3F0A030], + 'EFM32GG': [0, 0x4F54330A, 0, 0x228F5910, 0x01F204E8, 0x1BF08030], + 'ESP32-S2/S3': [0, 0x4F54400A, 0, 0x224DD930, 0x0C804B5, 0xD3F0A030], 'ESP32-P4': [0, 0x4F54400A, 0, 0x215FFFD0, 0x03805EB5, 0xDFF1A030], - 'ST F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x20001E8, 0xFF08030], - 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x3F403E8, 0x17F00030], - 'ST F412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'ST F723 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], - 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x3EED2E8, 0x23F00030], + 'ST F207/F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x020001E8, 0x0FF08030], + 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x03F403E8, 0x17F00030], + 'ST F412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F723/L4P5 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x03EED2E8, 0x23F00030], 'ST F769': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], - 'ST H743 HS': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x3B8D2E8, 0xE3F00030], # both HS cores - 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x200D1E8, 0x17F08030], + 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], + 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], - 'GD32VF103 FS': [0x1000, 0, 0, 0, 0, 0], - 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x27A01E5, 0xDBF08030] + 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], + 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030] + } # Combine dwc2_info with dwc2_reg_list diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 60bba9bd2..0d7cae77e 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -245,7 +245,7 @@ def test_dual_host_info_to_device_cdc(board): # for pico/pico2 make this test optional failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' if 'raspberry_pi_pico' in board['name']: - print(f'\r\n {failed_msg} ', end='') + print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') else: assert False, failed_msg return 0 diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 2358c3c4f..44d4a617c 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -20,6 +20,13 @@ "flasher_sn": "000682804350", "flasher_args": "-device nrf52840_xxaa" }, + { + "name": "max32666fthr", + "uid": "0C81464124010B20FF0A08CC2C", + "flasher": "openocd_adi", + "flasher_sn": "E6614C311B597D32", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + }, { "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", @@ -30,13 +37,6 @@ "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] } }, - { - "name": "max32666fthr", - "uid": "0C81464124010B20FF0A08CC2C", - "flasher": "openocd_adi", - "flasher_sn": "E6614C311B597D32", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" - }, { "name": "lpcxpresso11u37", "uid": "17121919", @@ -82,6 +82,16 @@ "flasher_sn": "779541626", "flasher_args": "-device stm32f072rb" }, + { + "name": "stm32f407disco", + "uid": "30001A000647313332353735", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "flasher": "jlink", + "flasher_sn": "000773661813", + "flasher_args": "-device stm32f407vg" + }, { "name": "stm32f769disco", "uid": "21002F000F51363531383437", -- cgit v1.3.1 From c3437961b8a9d65ca9efb2f6e22504cf1c695637 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 10 Oct 2024 00:04:29 +0700 Subject: remove stm32f769disco since it is not reliable --- examples/device/cdc_dual_ports/skip.txt | 2 ++ test/hil/tinyusb.json | 18 +++++++++--------- 2 files changed, 11 insertions(+), 9 deletions(-) create mode 100644 examples/device/cdc_dual_ports/skip.txt (limited to 'test/hil/tinyusb.json') diff --git a/examples/device/cdc_dual_ports/skip.txt b/examples/device/cdc_dual_ports/skip.txt new file mode 100644 index 000000000..75184e5e5 --- /dev/null +++ b/examples/device/cdc_dual_ports/skip.txt @@ -0,0 +1,2 @@ +board:stm32f407disco +board:stm32f411disco diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 44d4a617c..2313f5d13 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -92,6 +92,15 @@ "flasher_sn": "000773661813", "flasher_args": "-device stm32f407vg" }, + { + "name": "stm32g0b1nucleo", + "uid": "4D0038000450434E37343120", + "flasher": "openocd", + "flasher_sn": "066FFF495087534867063844", + "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + } + ], + "boards-skip": [ { "name": "stm32f769disco", "uid": "21002F000F51363531383437", @@ -102,15 +111,6 @@ "flasher_sn": "000778170924", "flasher_args": "-device stm32f769ni" }, - { - "name": "stm32g0b1nucleo", - "uid": "4D0038000450434E37343120", - "flasher": "openocd", - "flasher_sn": "066FFF495087534867063844", - "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" - } - ], - "boards-skip": [ { "name": "mimxrt1015_evk", "uid": "DC28F865D2111D228D00B0543A70463C", -- cgit v1.3.1 From 13f78e2e7716fda1c0ee1ef09a8bc76fde4f4c57 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 16:07:33 +0700 Subject: add esp32p4 to hil --- hw/bsp/espressif/boards/espressif_p4_function_ev/board.h | 4 ++++ hw/bsp/espressif/boards/family.c | 6 ++++++ test/hil/tinyusb.json | 13 +++++++++++++ 3 files changed, 23 insertions(+) (limited to 'test/hil/tinyusb.json') diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h index 9c8aa409f..0022f0d2d 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h @@ -36,6 +36,10 @@ #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 +// For CI hardware test, to test both device and host on the same HS port with help of +#define HIL_DEVICE_HOST_MUX_PIN 47 +#define HIL_DEVICE_STATE 1 + #ifdef __cplusplus } #endif diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 0b1e8badb..729b3539d 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -105,6 +105,12 @@ void board_init(void) { usb_init(); #endif +#ifdef HIL_DEVICE_HOST_MUX_PIN + gpio_reset_pin(HIL_DEVICE_HOST_MUX_PIN); + gpio_set_direction(HIL_DEVICE_HOST_MUX_PIN, GPIO_MODE_OUTPUT); + gpio_set_level(HIL_DEVICE_HOST_MUX_PIN, CFG_TUD_ENABLED ? HIL_DEVICE_STATE : (1-HIL_DEVICE_STATE)); +#endif + #if CFG_TUH_ENABLED && CFG_TUH_MAX3421 max3421_init(); #endif diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 2313f5d13..c92224e26 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -1,5 +1,18 @@ { "boards": [ + { + "name": "espressif_p4_function_ev", + "uid": "6055F9F98715", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "tests": { + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + }, + "flasher": "esptool", + "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", + "flasher_args": "-b 1500000" + }, { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", -- cgit v1.3.1 From 57c8c223e5f873e8075eb807844140004c74472d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 16:42:08 +0700 Subject: correctly test dwc2 dma device for s3, disable for p4 (cache issue) and f407 fs (slave only) --- .../components/tinyusb_src/CMakeLists.txt | 5 + src/portable/synopsys/dwc2/dwc2_info.md | 116 ++++++++++----------- src/portable/synopsys/dwc2/dwc2_info.py | 6 +- test/hil/tinyusb.json | 6 -- 4 files changed, 66 insertions(+), 67 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index e2250c4ca..900f620fd 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -60,6 +60,11 @@ if (DEFINED LOG) endif () endif() +if(DEFINED CFLAGS_CLI) + list(APPEND compile_definitions ${CFLAGS_CLI}) +endif() + + idf_component_register(SRCS ${srcs} INCLUDE_DIRS ${tusb_src} REQUIRES src diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 78c2c50f8..dec021f59 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/767 FS | ST F723/L4P5 FS | ST F723 HS | ST F769 | ST H743/H750 | ST L476 FS | ST U5A5 HS | GD32VF103 | XMC4500 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:------------|:-------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00001000 | 0x00AEC000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x00000000 | 0x4F54292A | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 0.00W | 2.92a | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x00000000 | 0x228F5930 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | DMA internal | -| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | hub | n/a | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 0 | 13 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | 8 | -| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | 8 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 8 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x00000000 | 0x027A01E5 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | 5 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | 6 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 0 | 634 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0x00000000 | 0xDBF08030 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 0 | 6 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 1 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | XMC4500 | GD32VF103 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 5884cd455..25edcf22d 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -15,15 +15,15 @@ dwc2_reg_value = { 'ESP32-P4': [0, 0x4F54400A, 0, 0x215FFFD0, 0x03805EB5, 0xDFF1A030], 'ST F207/F407/411/429 FS': [0x1200, 0x4F54281A, 0, 0x229DCD20, 0x020001E8, 0x0FF08030], 'ST F407/429 HS': [0x1100, 0x4F54281A, 0, 0x229ED590, 0x03F403E8, 0x17F00030], - 'ST F412/767 FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], + 'ST F412/76x FS': [0x2000, 0x4F54320A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST F723/L4P5 FS': [0x3000, 0x4F54330A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST F723 HS': [0x3100, 0x4F54330A, 0, 0x229FE1D0, 0x03EED2E8, 0x23F00030], - 'ST F769': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], + 'ST F76x HS': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], - 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030] } # Combine dwc2_info with dwc2_reg_list diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index c92224e26..f5a3f109e 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -3,9 +3,6 @@ { "name": "espressif_p4_function_ev", "uid": "6055F9F98715", - "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] - }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, @@ -98,9 +95,6 @@ { "name": "stm32f407disco", "uid": "30001A000647313332353735", - "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] - }, "flasher": "jlink", "flasher_sn": "000773661813", "flasher_args": "-device stm32f407vg" -- cgit v1.3.1 From d8970506a6999bb838fd61cdd1e97f57843d3f2d Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 17:33:02 +0700 Subject: hil replace f407disco by h743nucleo --- test/hil/tinyusb.json | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index f5a3f109e..ea5345126 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -93,11 +93,14 @@ "flasher_args": "-device stm32f072rb" }, { - "name": "stm32f407disco", - "uid": "30001A000647313332353735", - "flasher": "jlink", - "flasher_sn": "000773661813", - "flasher_args": "-device stm32f407vg" + "name": "stm32h743nucleo", + "uid": "110018000951383432343236", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "flasher": "stlink", + "flasher_sn": "004C00343137510F39383538", + "flasher_args": "" }, { "name": "stm32g0b1nucleo", @@ -131,6 +134,13 @@ "flasher": "openocd_wch", "flasher_sn": "EBCA8F0670AF", "flasher_args": "" + }, + { + "name": "stm32f407disco", + "uid": "30001A000647313332353735", + "flasher": "jlink", + "flasher_sn": "000773661813", + "flasher_args": "-device stm32f407vg" } ] } -- cgit v1.3.1 From 3c564fd947bbaa9042930afc83ed1afd5a073242 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 11 Nov 2024 18:40:31 +0700 Subject: try adding host test for p4 --- test/hil/hil_test.py | 44 ++++++++++++++++++++++++++++++++++++++------ test/hil/tinyusb.json | 8 ++++---- 2 files changed, 42 insertions(+), 10 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 0d7cae77e..4a0510223 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -224,14 +224,42 @@ def flash_uniflash(board, firmware): # ------------------------------------------------------------- # Tests: dual # ------------------------------------------------------------- - def test_dual_host_info_to_device_cdc(board): uid = board['uid'] - declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dual_attached']] + declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] + + port = get_serial_dev(board["flasher_sn"], None, None, 0) + ser = open_serial_dev(port) + # read from serial, first line should contain vid/pid and serial + data = ser.read(1000) + lines = data.decode('utf-8').splitlines() + enum_dev_sn = [] + for l in lines: + vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) + if vid_pid_sn: + print(f'\r\n {l} ', end='') + enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') + + if set(declared_devs) != set(enum_dev_sn): + # for pico/pico2 make this test optional + failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' + if 'raspberry_pi_pico' in board['name']: + print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') + else: + assert False, failed_msg + return 0 + + +# ------------------------------------------------------------- +# Tests: host +# ------------------------------------------------------------- +def test_host_cdc_msc_hid(board): + uid = board['uid'] + declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) - # read from cdc, first line should contain vid/pid and serial + # read from serial, first line should contain vid/pid and serial data = ser.read(1000) lines = data.decode('utf-8').splitlines() enum_dev_sn = [] @@ -251,6 +279,10 @@ def test_dual_host_info_to_device_cdc(board): return 0 +def test_host_cdc_msc_hid_freertos(board): + test_host_cdc_msc_hid(board) + + # ------------------------------------------------------------- # Tests: device # ------------------------------------------------------------- @@ -397,7 +429,7 @@ device_tests = [ 'device/hid_boot_interface', ] -dual_tests = [ +host_tests = [ 'dual/host_info_to_device_cdc', ] @@ -411,8 +443,8 @@ def test_board(board): if 'tests' in board: board_tests = board['tests'] - if 'dual_attached' in board_tests: - test_list += dual_tests + if 'dev_attached' in board_tests: + test_list += host_tests if 'only' in board_tests: test_list = board_tests['only'] if 'skip' in board_tests: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index ea5345126..1b0b7c99a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -4,7 +4,7 @@ "name": "espressif_p4_function_ev", "uid": "6055F9F98715", "tests": { - "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/cdc_msc_hid_freertos"] }, "flasher": "esptool", "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", @@ -44,7 +44,7 @@ "flasher_sn": "123456", "flasher_args": "-device ATSAMD51J19", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] } }, { @@ -72,7 +72,7 @@ "flasher_sn": "E6614103E72C1D2F", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] } }, { @@ -82,7 +82,7 @@ "flasher_sn": "E6633861A3978538", "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { - "dual_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] } }, { -- cgit v1.3.1 From e391e33492b0051d4961909d0763f44918ab8048 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 12 Nov 2024 19:00:00 +0700 Subject: update host/device_info to build with freertos for espressif board. Add hil test for host/device_info --- examples/host/device_info/only.txt | 3 + examples/host/device_info/src/CMakeLists.txt | 4 + examples/host/device_info/src/main.c | 155 +++++++++++++++++++++------ examples/host/device_info/src/tusb_config.h | 5 + test/hil/hil_test.py | 25 ++--- test/hil/tinyusb.json | 3 +- tools/build.py | 1 + 7 files changed, 150 insertions(+), 46 deletions(-) create mode 100644 examples/host/device_info/src/CMakeLists.txt (limited to 'test/hil/tinyusb.json') diff --git a/examples/host/device_info/only.txt b/examples/host/device_info/only.txt index f06d4df00..b6f87f423 100644 --- a/examples/host/device_info/only.txt +++ b/examples/host/device_info/only.txt @@ -1,3 +1,6 @@ +mcu:ESP32S2 +mcu:ESP32S3 +mcu:ESP32P4 mcu:KINETIS_KL mcu:LPC175X_6X mcu:LPC177X_8X diff --git a/examples/host/device_info/src/CMakeLists.txt b/examples/host/device_info/src/CMakeLists.txt new file mode 100644 index 000000000..1908a32c3 --- /dev/null +++ b/examples/host/device_info/src/CMakeLists.txt @@ -0,0 +1,4 @@ +# This file is for ESP-IDF only +idf_component_register(SRCS "main.c" + INCLUDE_DIRS "." + REQUIRES boards tinyusb_src) diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 0ff4f32e9..6591a0198 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -24,7 +24,7 @@ */ /* Host example will get device descriptors of attached devices and print it out via uart/rtt (logger) as follows: - * Device 1: ID 046d:c52f + * Device 1: ID 046d:c52f SN 11223344 Device Descriptor: bLength 18 bDescriptorType 1 @@ -56,15 +56,20 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -void led_blinking_task(void); -static void print_utf16(uint16_t* temp_buf, size_t buf_len); -/*------------- MAIN -------------*/ -int main(void) { - board_init(); +static uint32_t blink_interval_ms = 1000; - printf("TinyUSB Device Info Example\r\n"); +void led_blinking_task(void* param); +static void print_utf16(uint16_t* temp_buf, size_t buf_len); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS +void init_freertos_task(void); +#endif +//-------------------------------------------------------------------- +// Main +//-------------------------------------------------------------------- +void init_tinyusb(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { .role = TUSB_ROLE_HOST, @@ -75,14 +80,22 @@ int main(void) { if (board_init_after_tusb) { board_init_after_tusb(); } +} + +int main(void) { + board_init(); + printf("TinyUSB Device Info Example\r\n"); +#if CFG_TUSB_OS == OPT_OS_FREERTOS + init_freertos_task(); +#else + init_tinyusb(); while (1) { - // tinyusb host task - tuh_task(); + tuh_task(); // tinyusb host task led_blinking_task(); } - return 0; +#endif } /*------------- TinyUSB Callbacks -------------*/ @@ -97,9 +110,20 @@ void tuh_mount_cb(uint8_t daddr) { return; } + uint16_t serial[64]; uint16_t buf[256]; - printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct); + printf("Device %u: ID %04x:%04x SN ", daddr, desc_device.idVendor, desc_device.idProduct); + xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); + if (XFER_RESULT_SUCCESS != xfer_result) { + serial[0] = 'n'; + serial[1] = '/'; + serial[2] = 'a'; + serial[3] = 0; + } + print_utf16(serial, TU_ARRAY_SIZE(serial)); + printf("\r\n"); + printf("Device Descriptor:\r\n"); printf(" bLength %u\r\n", desc_device.bLength); printf(" bDescriptorType %u\r\n", desc_device.bDescriptorType); @@ -129,37 +153,17 @@ void tuh_mount_cb(uint8_t daddr) { printf("\r\n"); printf(" iSerialNumber %u ", desc_device.iSerialNumber); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result) { - print_utf16(buf, TU_ARRAY_SIZE(buf)); - } + printf((char*)serial); // serial is already to UTF-8 printf("\r\n"); printf(" bNumConfigurations %u\r\n", desc_device.bNumConfigurations); } -/// Invoked when device is unmounted (bus reset/unplugged) +// Invoked when device is unmounted (bus reset/unplugged) void tuh_umount_cb(uint8_t daddr) { printf("Device removed, address = %d\r\n", daddr); } -//--------------------------------------------------------------------+ -// Blinking Task -//--------------------------------------------------------------------+ -void led_blinking_task(void) { - const uint32_t interval_ms = 1000; - static uint32_t start_ms = 0; - - static bool led_state = false; - - // Blink every interval ms - if (board_millis() - start_ms < interval_ms) return; // not enough time - start_ms += interval_ms; - - board_led_write(led_state); - led_state = 1 - led_state; // toggle -} - //--------------------------------------------------------------------+ // String Descriptor Helper //--------------------------------------------------------------------+ @@ -212,3 +216,88 @@ static void print_utf16(uint16_t* temp_buf, size_t buf_len) { printf("%s", (char*) temp_buf); } + +//--------------------------------------------------------------------+ +// Blinking Task +//--------------------------------------------------------------------+ +void led_blinking_task(void* param) { + (void) param; + static uint32_t start_ms = 0; + static bool led_state = false; + + while (1) { +#if CFG_TUSB_OS == OPT_OS_FREERTOS + if (blink_interval_ms == 0) { + vTaskSuspend(NULL); + } else { + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); + } +#else + if (blink_interval_ms == 0) { + return; + } + if (board_millis() - start_ms < blink_interval_ms) { + return; // not enough time + } +#endif + + start_ms += blink_interval_ms; + board_led_write(led_state); + led_state = 1 - led_state; // toggle + } +} + +//--------------------------------------------------------------------+ +// FreeRTOS +//--------------------------------------------------------------------+ +#if CFG_TUSB_OS == OPT_OS_FREERTOS + +#define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE + +#if TUSB_MCU_VENDOR_ESPRESSIF + #define USB_STACK_SIZE 4096 +#else + // Increase stack size when debug log is enabled + #define USB_STACK_SIZE (3*configMINIMAL_STACK_SIZE/2) * (CFG_TUSB_DEBUG ? 2 : 1) +#endif + + +// static task +#if configSUPPORT_STATIC_ALLOCATION +StackType_t blinky_stack[BLINKY_STACK_SIZE]; +StaticTask_t blinky_taskdef; + +StackType_t usb_stack[USB_STACK_SIZE]; +StaticTask_t usb_taskdef; +#endif + +#if TUSB_MCU_VENDOR_ESPRESSIF +void app_main(void) { + main(); +} +#endif + +void usb_host_task(void *param) { + (void) param; + init_tinyusb(); + while (1) { + tuh_task(); + } +} + +void init_freertos_task(void) { +#if configSUPPORT_STATIC_ALLOCATION + xTaskCreateStatic(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, blinky_stack, &blinky_taskdef); + xTaskCreateStatic(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES-1, usb_stack, &usb_taskdef); +#else + xTaskCreate(led_blinking_task, "blinky", BLINKY_STACK_SIZE, NULL, 1, NULL); + xTaskCreate(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); +#endif + + // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#if !TUSB_MCU_VENDOR_ESPRESSIF + vTaskStartScheduler(); +#endif +} + +#endif diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index 2e9731eaf..5190b5b1f 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -39,6 +39,11 @@ #error CFG_TUSB_MCU must be defined #endif +// Espressif IDF requires "freertos/" prefix in include path +#if TUSB_MCU_VENDOR_ESPRESSIF +#define CFG_TUSB_OS_INC_PATH freertos/ +#endif + #ifndef CFG_TUSB_OS #define CFG_TUSB_OS OPT_OS_NONE #endif diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 4a0510223..91fe6b67c 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -50,6 +50,7 @@ verbose = False # Path # ------------------------------------------------------------- OPENCOD_ADI_PATH = f'{os.getenv("HOME")}/app/openocd_adi' +TINYUSB_ROOT = os.path.dirname(os.path.dirname(os.path.dirname(os.path.abspath(__file__)))) # get usb serial by id def get_serial_dev(id, vendor_str, product_str, ifnum): @@ -83,7 +84,7 @@ def open_serial_dev(port): # slight delay since kernel may occupy the port briefly time.sleep(0.5) timeout = timeout - 0.5 - ser = serial.Serial(port, timeout=5) + ser = serial.Serial(port, baudrate=115200, timeout=5) break except serial.SerialException: pass @@ -212,6 +213,7 @@ def flash_esptool(board, firmware): flash_args = f.read().strip().replace('\n', ' ') command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') + # command = f'echo abc' ret = run_cmd(command, cwd=fw_dir) return ret @@ -228,7 +230,7 @@ def test_dual_host_info_to_device_cdc(board): uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(board["flasher_sn"], None, None, 0) + port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) # read from serial, first line should contain vid/pid and serial data = ser.read(1000) @@ -253,14 +255,16 @@ def test_dual_host_info_to_device_cdc(board): # ------------------------------------------------------------- # Tests: host # ------------------------------------------------------------- -def test_host_cdc_msc_hid(board): +def test_host_device_info(board): uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) + port = get_serial_dev(board["flasher_sn"], None, None, 0) ser = open_serial_dev(port) - # read from serial, first line should contain vid/pid and serial data = ser.read(1000) + if len(data) == 0: + assert False, 'No data from device' + lines = data.decode('utf-8').splitlines() enum_dev_sn = [] for l in lines: @@ -276,11 +280,8 @@ def test_host_cdc_msc_hid(board): print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') else: assert False, failed_msg - return 0 - -def test_host_cdc_msc_hid_freertos(board): - test_host_cdc_msc_hid(board) + return 0 # ------------------------------------------------------------- @@ -454,7 +455,7 @@ def test_board(board): print(f'{name:25} {skip:30} ... Skip') # board_test is added last to disable board's usb - test_list.append('device/board_test') + #test_list.append('device/board_test') err_count = 0 flags_on_list = [""] @@ -466,9 +467,9 @@ def test_board(board): if f1 != "": f1_str = '-' + f1.replace(' ', '-') for test in test_list: - fw_dir = f'cmake-build/cmake-build-{name}{f1_str}/{test}' + fw_dir = f'{TINYUSB_ROOT}/cmake-build/cmake-build-{name}{f1_str}/{test}' if not os.path.exists(fw_dir): - fw_dir = f'examples/cmake-build-{name}{f1_str}/{test}' + fw_dir = f'{TINYUSB_ROOT}/examples/cmake-build-{name}{f1_str}/{test}' fw_name = f'{fw_dir}/{os.path.basename(test)}' print(f'{name+f1_str:40} {test:30} ... ', end='') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 1b0b7c99a..2d61981f2 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -4,7 +4,8 @@ "name": "espressif_p4_function_ev", "uid": "6055F9F98715", "tests": { - "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/cdc_msc_hid_freertos"] + "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002427"}] }, "flasher": "esptool", "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", diff --git a/tools/build.py b/tools/build.py index 91d4ebd30..48666adc4 100755 --- a/tools/build.py +++ b/tools/build.py @@ -68,6 +68,7 @@ def get_examples(family): if family == 'espressif': all_examples.append('device/board_test') all_examples.append('device/video_capture') + all_examples.append('host/device_info') all_examples.sort() return all_examples -- cgit v1.3.1 From aeae2966a2afa669068e54eef7c4dd2dceffaa0d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 13:08:30 +0700 Subject: hil add stm32f723disco, add test flags for device/host/dual --- examples/device/cdc_msc/CMakeLists.txt | 2 +- examples/host/device_info/src/main.c | 20 +-- hw/bsp/stm32f7/boards/stm32f723disco/board.cmake | 6 +- hw/bsp/stm32f7/boards/stm32f723disco/board.mk | 5 +- hw/bsp/stm32f7/family.c | 29 +++-- src/portable/synopsys/dwc2/hcd_dwc2.c | 6 +- test/hil/hil_test.py | 147 ++++++++++++++++------- test/hil/tinyusb.json | 69 +++++++++-- 8 files changed, 200 insertions(+), 84 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/examples/device/cdc_msc/CMakeLists.txt b/examples/device/cdc_msc/CMakeLists.txt index 9415f8c68..c2f9cb095 100644 --- a/examples/device/cdc_msc/CMakeLists.txt +++ b/examples/device/cdc_msc/CMakeLists.txt @@ -1,5 +1,5 @@ cmake_minimum_required(VERSION 3.17) -set_property(GLOBAL PROPERTY USE_FOLDERS ON) +#set_property(GLOBAL PROPERTY USE_FOLDERS ON) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 8e0185878..70304e449 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -56,8 +56,12 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ - -static uint32_t blink_interval_ms = 1000; +enum { + BLINK_NOT_MOUNTED = 250, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, +}; +static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; void led_blinking_task(void* param); static void print_utf16(uint16_t* temp_buf, size_t buf_len); @@ -102,6 +106,8 @@ int main(void) { // Invoked when device is mounted (configured) void tuh_mount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_MOUNTED; + // Get Device Descriptor tusb_desc_device_t desc_device; uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); @@ -161,6 +167,7 @@ void tuh_mount_cb(uint8_t daddr) { // Invoked when device is unmounted (bus reset/unplugged) void tuh_umount_cb(uint8_t daddr) { + blink_interval_ms = BLINK_NOT_MOUNTED; printf("Device removed, address = %d\r\n", daddr); } @@ -227,15 +234,8 @@ void led_blinking_task(void* param) { while (1) { #if CFG_TUSB_OS == OPT_OS_FREERTOS - if (blink_interval_ms == 0) { - vTaskSuspend(NULL); - } else { - vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); - } + vTaskDelay(blink_interval_ms / portTICK_PERIOD_MS); #else - if (blink_interval_ms == 0) { - return; - } if (board_millis() - start_ms < blink_interval_ms) { return; // not enough time } diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake index 5655c217e..eb3ed407b 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake @@ -5,12 +5,12 @@ set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld) set(RHPORT_SPEED OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED) -# device default to PORT 1 High Speed +# For Hardware test: device default to PORT 0, Host to port 1 if (NOT DEFINED RHPORT_DEVICE) - set(RHPORT_DEVICE 1) + set(RHPORT_DEVICE 0) endif() if (NOT DEFINED RHPORT_HOST) - set(RHPORT_HOST 0) + set(RHPORT_HOST 1) endif() function(update_board TARGET) diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk index eb6799eb0..9b8e7a969 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk @@ -1,8 +1,9 @@ MCU_VARIANT = stm32f723xx +# For Hardware test: device default to PORT 0, Host to port 1 RHPORT_SPEED = OPT_MODE_FULL_SPEED OPT_MODE_HIGH_SPEED -RHPORT_DEVICE ?= 1 -RHPORT_HOST ?= 0 +RHPORT_DEVICE ?= 0 +RHPORT_HOST ?= 1 CFLAGS += \ -DSTM32F723xx \ diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 61beac47e..527fbfe5c 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -37,6 +37,25 @@ typedef struct { #include "board.h" +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +#ifdef UART_DEV +UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + } +}; +#endif + //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ @@ -54,8 +73,6 @@ void OTG_HS_IRQHandler(void) { // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ -UART_HandleTypeDef UartHandle; - void board_init(void) { board_clock_init(); @@ -89,14 +106,6 @@ void board_init(void) { #endif #ifdef UART_DEV - UartHandle.Instance = UART_DEV; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; HAL_UART_Init(&UartHandle); #endif diff --git a/src/portable/synopsys/dwc2/hcd_dwc2.c b/src/portable/synopsys/dwc2/hcd_dwc2.c index f9fc5ca8e..53583426f 100644 --- a/src/portable/synopsys/dwc2/hcd_dwc2.c +++ b/src/portable/synopsys/dwc2/hcd_dwc2.c @@ -1181,8 +1181,7 @@ static bool handle_sof_irq(uint8_t rhport, bool in_isr) { } // Config HCFG FS/LS clock and HFIR for SOF interval according to link speed (value is in PHY clock unit) -static void port0_enable(dwc2_regs_t* dwc2) { - const tusb_speed_t speed = hprt_speed_get(dwc2); +static void port0_enable(dwc2_regs_t* dwc2, tusb_speed_t speed) { uint32_t hcfg = dwc2->hcfg & ~HCFG_FSLS_PHYCLK_SEL; const dwc2_gusbcfg_t gusbcfg_bm = dwc2->gusbcfg_bm; @@ -1252,7 +1251,8 @@ static void handle_hprt_irq(uint8_t rhport, bool in_isr) { if (hprt_bm.enable) { // Port enable - port0_enable(dwc2); + const tusb_speed_t speed = hprt_speed_get(dwc2); + port0_enable(dwc2, speed); } else { // TU_ASSERT(false, ); } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 91fe6b67c..b395c28a4 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -46,6 +46,26 @@ STATUS_SKIPPED = "\033[33mSkipped\033[0m" verbose = False +WCH_RISCV_CONTENT = """ +adapter driver wlinke +adapter speed 6000 +transport select sdi + +wlink_set_address 0x00000000 +set _CHIPNAME wch_riscv +sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 + +set _TARGETNAME $_CHIPNAME.cpu + +target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME +$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 +set _FLASHNAME $_CHIPNAME.flash + +flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 + +echo "Ready for Remote Connections" +""" + # ------------------------------------------------------------- # Path # ------------------------------------------------------------- @@ -147,49 +167,60 @@ def flash_jlink(board, firmware): return ret -def flash_stlink(board, firmware): - ret = run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go') +def reset_jlink(board): + script = ['halt', 'r', 'go', 'exit'] + f_jlink = f'{board["name"]}_reset.jlink' + if not os.path.exists(f_jlink): + with open(f_jlink, 'w') as f: + f.writelines(f'{s}\n' for s in script) + ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') return ret +def flash_stlink(board, firmware): + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go') + + +def reset_stlink(board): + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --rst --go') + def flash_stflash(board, firmware): ret = run_cmd(f'st-flash --serial {board["flasher_sn"]} write {firmware}.bin 0x8000000') return ret +def reset_stflash(board): + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + def flash_openocd(board, firmware): ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"') return ret -def flash_openocd_wch(board, firmware): - # Content of the wch-riscv.cfg file - cfg_content = """ -adapter driver wlinke -adapter speed 6000 -transport select sdi +def reset_openocd(board): + ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "reset exit"') + return ret -wlink_set_address 0x00000000 -set _CHIPNAME wch_riscv -sdi newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x00001 -set _TARGETNAME $_CHIPNAME.cpu +def flash_openocd_wch(board, firmware): + f_wch = f"wch-riscv_{board['uid']}.cfg" + if not os.path.exists(f_wch): + with open(f_wch, 'w') as file: + file.write(WCH_RISCV_CONTENT) -target create $_TARGETNAME.0 wch_riscv -chain-position $_TARGETNAME -$_TARGETNAME.0 configure -work-area-phys 0x20000000 -work-area-size 10000 -work-area-backup 1 -set _FLASHNAME $_CHIPNAME.flash + ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' + f'-c "program {firmware}.elf reset exit"') + return ret -flash bank $_FLASHNAME wch_riscv 0x00000000 0 0 0 $_TARGETNAME.0 -echo "Ready for Remote Connections" -""" +def reset_openocd_wch(board): f_wch = f"wch-riscv_{board['uid']}.cfg" if not os.path.exists(f_wch): with open(f_wch, 'w') as file: - file.write(cfg_content) + file.write(WCH_RISCV_CONTENT) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' - f'-c "program {firmware}.elf reset exit"') + ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} -c "program reset exit"') return ret @@ -198,12 +229,25 @@ def flash_openocd_adi(board, firmware): f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"') return ret + +def reset_openocd_adi(board): + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{board["flasher_args"]} -c "program reset exit"') + return ret + + def flash_wlink_rs(board, firmware): # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink flash {firmware}.elf') return ret +def reset_wlink_rs(board): + # wlink use index for probe selection and lacking usb serial support + ret = run_cmd(f'wlink reset') + return ret + + def flash_esptool(board, firmware): port = get_serial_dev(board["flasher_sn"], None, None, 0) fw_dir = os.path.dirname(f'{firmware}.bin') @@ -213,28 +257,39 @@ def flash_esptool(board, firmware): flash_args = f.read().strip().replace('\n', ' ') command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') - # command = f'echo abc' ret = run_cmd(command, cwd=fw_dir) return ret +def reset_esptool(board): + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + def flash_uniflash(board, firmware): ret = run_cmd(f'dslite.sh {board["flasher_args"]} -f {firmware}.hex') return ret +def reset_uniflash(board): + return subprocess.CompletedProcess(args=['dummy'], returncode=0) + + # ------------------------------------------------------------- # Tests: dual # ------------------------------------------------------------- def test_dual_host_info_to_device_cdc(board): uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(uid, 'TinyUSB', "TinyUSB_Device", 0) ser = open_serial_dev(port) - # read from serial, first line should contain vid/pid and serial + + # read from cdc, first line should contain vid/pid and serial data = ser.read(1000) + ser.close() + if len(data) == 0: + assert False, 'No data from device' lines = data.decode('utf-8').splitlines() + enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -243,12 +298,8 @@ def test_dual_host_info_to_device_cdc(board): enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') if set(declared_devs) != set(enum_dev_sn): - # for pico/pico2 make this test optional - failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' - if 'raspberry_pi_pico' in board['name']: - print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') - else: - assert False, failed_msg + failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + assert False, failed_msg return 0 @@ -256,12 +307,17 @@ def test_dual_host_info_to_device_cdc(board): # Tests: host # ------------------------------------------------------------- def test_host_device_info(board): - uid = board['uid'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] port = get_serial_dev(board["flasher_sn"], None, None, 0) ser = open_serial_dev(port) + + # reset device since we can miss the first line + ret = globals()[f'reset_{board["flasher"].lower()}'](board) + assert ret.returncode == 0, 'Failed to reset device' + data = ser.read(1000) + ser.close() if len(data) == 0: assert False, 'No data from device' @@ -274,12 +330,8 @@ def test_host_device_info(board): enum_dev_sn.append(f'{vid_pid_sn.group(1)}_{vid_pid_sn.group(2)}_{vid_pid_sn.group(3)}') if set(declared_devs) != set(enum_dev_sn): - # for pico/pico2 make this test optional - failed_msg = f'Enumerated devices {enum_dev_sn} not match with declared {declared_devs}' - if 'raspberry_pi_pico' in board['name']: - print(f'\r\n {failed_msg} {STATUS_FAILED} ', end='') - else: - assert False, failed_msg + failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + assert False, failed_msg return 0 @@ -323,7 +375,8 @@ def test_device_cdc_msc(board): str = b"test_str" ser.write(str) ser.flush() - assert ser.read(len(str)) == str, 'CDC wrong data' + rd_str = ser.read(len(str)) + assert rd_str == str, f'CDC wrong data: expected: {str} was {rd_str}' # Block test data = read_disk_file(uid,0,'README.TXT') @@ -430,10 +483,14 @@ device_tests = [ 'device/hid_boot_interface', ] -host_tests = [ +dual_tests = [ 'dual/host_info_to_device_cdc', ] +host_test = [ + 'host/device_info', +] + def test_board(board): name = board['name'] @@ -444,8 +501,12 @@ def test_board(board): if 'tests' in board: board_tests = board['tests'] - if 'dev_attached' in board_tests: - test_list += host_tests + if 'device' in board_tests and board_tests['device'] == True: + test_list += list(device_tests) + if 'dual' in board_tests and board_tests['dual'] == True: + test_list += dual_tests + if 'host' in board_tests and board_tests['host'] == True: + test_list += host_test if 'only' in board_tests: test_list = board_tests['only'] if 'skip' in board_tests: @@ -455,7 +516,7 @@ def test_board(board): print(f'{name:25} {skip:30} ... Skip') # board_test is added last to disable board's usb - #test_list.append('device/board_test') + test_list.append('device/board_test') err_count = 0 flags_on_list = [""] @@ -473,7 +534,7 @@ def test_board(board): fw_name = f'{fw_dir}/{os.path.basename(test)}' print(f'{name+f1_str:40} {test:30} ... ', end='') - if not os.path.exists(fw_dir): + if not os.path.exists(fw_dir) or not (os.path.exists(f'{fw_name}.elf') or os.path.exists(f'{fw_name}.bin')): print('Skip (no binary)') continue diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 2d61981f2..f3ef9dcf7 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -27,6 +27,9 @@ { "name": "feather_nrf52840_express", "uid": "1F0479CD0F764471", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000682804350", "flasher_args": "-device nrf52840_xxaa" @@ -34,6 +37,9 @@ { "name": "max32666fthr", "uid": "0C81464124010B20FF0A08CC2C", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "openocd_adi", "flasher_sn": "E6614C311B597D32", "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" @@ -41,16 +47,20 @@ { "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", - "flasher": "jlink", - "flasher_sn": "123456", - "flasher_args": "-device ATSAMD51J19", "tests": { + "device": true, "host": false, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] - } + }, + "flasher": "jlink", + "flasher_sn": "123456", + "flasher_args": "-device ATSAMD51J19" }, { "name": "lpcxpresso11u37", "uid": "17121919", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000724441579", "flasher_args": "-device LPC11U37/401" @@ -59,6 +69,7 @@ "name": "ra4m1_ek", "uid": "152E163038303131393346E46F26574B", "tests": { + "device": true, "host": false, "dual": false, "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] }, "comment": "MSC is slow to enumerated #2602", @@ -69,22 +80,24 @@ { "name": "raspberry_pi_pico", "uid": "E6614C311B764A37", - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"", "tests": { + "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] - } + }, + "flasher": "openocd", + "flasher_sn": "E6614103E72C1D2F", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" }, { "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", - "flasher": "openocd", - "flasher_sn": "E6633861A3978538", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"", "tests": { + "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] - } + }, + "flasher": "openocd", + "flasher_sn": "E6633861A3978538", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"" }, { "name": "stm32f072disco", @@ -93,12 +106,29 @@ "flasher_sn": "779541626", "flasher_args": "-device stm32f072rb" }, + { + "name": "stm32f723disco", + "uid": "460029001951373031313335", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA"] + }, + "tests": { + "device": true, "host": true, "dual": false, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2003414"}] + }, + "flasher": "jlink", + "flasher_sn": "000776606156", + "flasher_args": "-device stm32f723ie" + }, { "name": "stm32h743nucleo", "uid": "110018000951383432343236", "build" : { "flags_on": ["", "CFG_TUD_DWC2_DMA"] }, + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "stlink", "flasher_sn": "004C00343137510F39383538", "flasher_args": "" @@ -106,6 +136,9 @@ { "name": "stm32g0b1nucleo", "uid": "4D0038000450434E37343120", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "openocd", "flasher_sn": "066FFF495087534867063844", "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" @@ -118,6 +151,9 @@ "build" : { "flags_on": ["", "CFG_TUD_DWC2_DMA"] }, + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000778170924", "flasher_args": "-device stm32f769ni" @@ -125,6 +161,9 @@ { "name": "mimxrt1015_evk", "uid": "DC28F865D2111D228D00B0543A70463C", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000726284213", "flasher_args": "-device MIMXRT1015DAF5A" @@ -132,6 +171,9 @@ { "name": "nanoch32v203", "uid": "CDAB277B0FBC03E339E339E3", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "openocd_wch", "flasher_sn": "EBCA8F0670AF", "flasher_args": "" @@ -139,6 +181,9 @@ { "name": "stm32f407disco", "uid": "30001A000647313332353735", + "tests": { + "device": true, "host": false, "dual": false + }, "flasher": "jlink", "flasher_sn": "000773661813", "flasher_args": "-device stm32f407vg" -- cgit v1.3.1 From 42ead3a8e06bc48d6ddbdcbd0f8e018a00e7de32 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 13:37:29 +0700 Subject: hil cleanup flahser --- .idea/cmake.xml | 13 +++-- test/hil/hfp.json | 33 ++++++++---- test/hil/hil_test.py | 59 ++++++++++++++-------- test/hil/tinyusb.json | 136 +++++++++++++++++++++++++++++++------------------- 4 files changed, 158 insertions(+), 83 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 625bfa916..1210c49e7 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -54,7 +54,14 @@ - + + + + + + + + @@ -92,9 +99,9 @@ - + - + diff --git a/test/hil/hfp.json b/test/hil/hfp.json index e79a3cfc9..8ba7a8f44 100644 --- a/test/hil/hfp.json +++ b/test/hil/hfp.json @@ -3,23 +3,38 @@ { "name": "stm32l412nucleo", "uid": "41003B000E504E5457323020", - "flasher": "jlink", - "flasher_sn": "774470029", - "flasher_args": "-device STM32L412KB" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "774470029", + "args": "-device STM32L412KB" + } }, { "name": "stm32f746disco", "uid": "210041000C51343237303334", - "flasher": "jlink", - "flasher_sn": "770935966", - "flasher_args": "-device STM32F746NG" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "770935966", + "args": "-device STM32F746NG" + } }, { "name": "lpcxpresso43s67", "uid": "08F000044528BAAA8D858F58C50700F5", - "flasher": "jlink", - "flasher_sn": "728973776", - "flasher_args": "-device LPC43S67_M4" + "tests": { + "device": true, "host": false, "dual": false + }, + "flasher": { + "name": "jlink", + "uid": "728973776", + "args": "-device LPC43S67_M4" + } } ] } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index b395c28a4..e7f1953b1 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -158,119 +158,137 @@ def run_cmd(cmd, cwd=None): def flash_jlink(board, firmware): + flasher = board['flasher'] script = ['halt', 'r', f'loadfile {firmware}.elf', 'r', 'go', 'exit'] f_jlink = f'{board["name"]}_{os.path.basename(firmware)}.jlink' with open(f_jlink, 'w') as f: f.writelines(f'{s}\n' for s in script) - ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') + ret = run_cmd(f'JLinkExe -USB {flasher["uid"]} {flasher["args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') os.remove(f_jlink) return ret def reset_jlink(board): + flasher = board['flasher'] script = ['halt', 'r', 'go', 'exit'] f_jlink = f'{board["name"]}_reset.jlink' if not os.path.exists(f_jlink): with open(f_jlink, 'w') as f: f.writelines(f'{s}\n' for s in script) - ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') + ret = run_cmd(f'JLinkExe -USB {flasher["uid"]} {flasher["args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile {f_jlink}') return ret def flash_stlink(board, firmware): - return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --write {firmware}.elf --go') + flasher = board['flasher'] + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={flasher["uid"]} --write {firmware}.elf --go') def reset_stlink(board): - return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={board["flasher_sn"]} --rst --go') + flasher = board['flasher'] + return run_cmd(f'STM32_Programmer_CLI --connect port=swd sn={flasher["uid"]} --rst --go') def flash_stflash(board, firmware): - ret = run_cmd(f'st-flash --serial {board["flasher_sn"]} write {firmware}.bin 0x8000000') + flasher = board['flasher'] + ret = run_cmd(f'st-flash --serial {flasher["uid"]} write {firmware}.bin 0x8000000') return ret def reset_stflash(board): + flasher = board['flasher'] return subprocess.CompletedProcess(args=['dummy'], returncode=0) def flash_openocd(board, firmware): - ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'openocd -c "adapter serial {flasher["uid"]}" {flasher["args"]} -c "program {firmware}.elf reset exit"') return ret def reset_openocd(board): - ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'openocd -c "adapter serial {flasher["uid"]}" {flasher["args"]} -c "reset exit"') return ret def flash_openocd_wch(board, firmware): + flasher = board['flasher'] f_wch = f"wch-riscv_{board['uid']}.cfg" if not os.path.exists(f_wch): with open(f_wch, 'w') as file: file.write(WCH_RISCV_CONTENT) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} ' + ret = run_cmd(f'openocd_wch -c "adapter serial {flasher["uid"]}" -f {f_wch} ' f'-c "program {firmware}.elf reset exit"') return ret def reset_openocd_wch(board): + flasher = board['flasher'] f_wch = f"wch-riscv_{board['uid']}.cfg" if not os.path.exists(f_wch): with open(f_wch, 'w') as file: file.write(WCH_RISCV_CONTENT) - ret = run_cmd(f'openocd_wch -c "adapter serial {board["flasher_sn"]}" -f {f_wch} -c "program reset exit"') + ret = run_cmd(f'openocd_wch -c "adapter serial {flasher["uid"]}" -f {f_wch} -c "program reset exit"') return ret def flash_openocd_adi(board, firmware): - ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' - f'{board["flasher_args"]} -c "program {firmware}.elf reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {flasher["uid"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{flasher["args"]} -c "program {firmware}.elf reset exit"') return ret def reset_openocd_adi(board): - ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {board["flasher_sn"]}" -s {OPENCOD_ADI_PATH}/tcl ' - f'{board["flasher_args"]} -c "program reset exit"') + flasher = board['flasher'] + ret = run_cmd(f'{OPENCOD_ADI_PATH}/src/openocd -c "adapter serial {flasher["uid"]}" -s {OPENCOD_ADI_PATH}/tcl ' + f'{flasher["args"]} -c "program reset exit"') return ret def flash_wlink_rs(board, firmware): + flasher = board['flasher'] # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink flash {firmware}.elf') return ret def reset_wlink_rs(board): + flasher = board['flasher'] # wlink use index for probe selection and lacking usb serial support ret = run_cmd(f'wlink reset') return ret def flash_esptool(board, firmware): - port = get_serial_dev(board["flasher_sn"], None, None, 0) + flasher = board['flasher'] + port = get_serial_dev(flasher["uid"], None, None, 0) fw_dir = os.path.dirname(f'{firmware}.bin') with open(f'{fw_dir}/config.env') as f: idf_target = json.load(f)['IDF_TARGET'] with open(f'{fw_dir}/flash_args') as f: flash_args = f.read().strip().replace('\n', ' ') - command = (f'esptool.py --chip {idf_target} -p {port} {board["flasher_args"]} ' + command = (f'esptool.py --chip {idf_target} -p {port} {flasher["args"]} ' f'--before=default_reset --after=hard_reset write_flash {flash_args}') ret = run_cmd(command, cwd=fw_dir) return ret def reset_esptool(board): + flasher = board['flasher'] return subprocess.CompletedProcess(args=['dummy'], returncode=0) def flash_uniflash(board, firmware): - ret = run_cmd(f'dslite.sh {board["flasher_args"]} -f {firmware}.hex') + flasher = board['flasher'] + ret = run_cmd(f'dslite.sh {flasher["args"]} -f {firmware}.hex') return ret def reset_uniflash(board): + flasher = board['flasher'] return subprocess.CompletedProcess(args=['dummy'], returncode=0) @@ -307,13 +325,14 @@ def test_dual_host_info_to_device_cdc(board): # Tests: host # ------------------------------------------------------------- def test_host_device_info(board): + flasher = board['flasher'] declared_devs = [f'{d["vid_pid"]}_{d["serial"]}' for d in board['tests']['dev_attached']] - port = get_serial_dev(board["flasher_sn"], None, None, 0) + port = get_serial_dev(flasher["uid"], None, None, 0) ser = open_serial_dev(port) # reset device since we can miss the first line - ret = globals()[f'reset_{board["flasher"].lower()}'](board) + ret = globals()[f'reset_{flasher["name"].lower()}'](board) assert ret.returncode == 0, 'Failed to reset device' data = ser.read(1000) @@ -494,7 +513,7 @@ host_test = [ def test_board(board): name = board['name'] - flasher = board['flasher'].lower() + flasher = board['flasher'] # default to all tests test_list = list(device_tests) @@ -540,7 +559,7 @@ def test_board(board): # flash firmware. It may fail randomly, retry a few times for i in range(3): - ret = globals()[f'flash_{flasher}'](board, fw_name) + ret = globals()[f'flash_{flasher["name"].lower()}'](board, fw_name) if ret.returncode == 0: break else: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index f3ef9dcf7..4d450cc5a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -7,9 +7,11 @@ "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002427"}] }, - "flasher": "esptool", - "flasher_sn": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", - "flasher_args": "-b 1500000" + "flasher": { + "name": "esptool", + "uid": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", + "args": "-b 1500000" + } }, { "name": "espressif_s3_devkitm", @@ -20,9 +22,11 @@ "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] }, - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 1500000" + "flasher": { + "name": "esptool", + "uid": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "args": "-b 1500000" + } }, { "name": "feather_nrf52840_express", @@ -30,9 +34,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000682804350", - "flasher_args": "-device nrf52840_xxaa" + "flasher": { + "name": "jlink", + "uid": "000682804350", + "args": "-device nrf52840_xxaa" + } }, { "name": "max32666fthr", @@ -40,9 +46,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "openocd_adi", - "flasher_sn": "E6614C311B597D32", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + "flasher": { + "name": "openocd_adi", + "uid": "E6614C311B597D32", + "args": "-f interface/cmsis-dap.cfg -f target/max32665.cfg" + } }, { "name": "metro_m4_express", @@ -51,9 +59,11 @@ "device": true, "host": false, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] }, - "flasher": "jlink", - "flasher_sn": "123456", - "flasher_args": "-device ATSAMD51J19" + "flasher": { + "name": "jlink", + "uid": "123456", + "args": "-device ATSAMD51J19" + } }, { "name": "lpcxpresso11u37", @@ -61,9 +71,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000724441579", - "flasher_args": "-device LPC11U37/401" + "flasher": { + "name": "jlink", + "uid": "000724441579", + "args": "-device LPC11U37/401" + } }, { "name": "ra4m1_ek", @@ -73,9 +85,11 @@ "skip": ["device/cdc_msc", "device/cdc_msc_freertos"] }, "comment": "MSC is slow to enumerated #2602", - "flasher": "jlink", - "flasher_sn": "000831174392", - "flasher_args": "-device R7FA4M1AB" + "flasher": { + "name": "jlink", + "uid": "000831174392", + "args": "-device R7FA4M1AB" + } }, { "name": "raspberry_pi_pico", @@ -84,9 +98,11 @@ "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] }, - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + "flasher": { + "name": "openocd", + "uid": "E6614103E72C1D2F", + "args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + } }, { "name": "raspberry_pi_pico2", @@ -95,16 +111,20 @@ "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] }, - "flasher": "openocd", - "flasher_sn": "E6633861A3978538", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"" + "flasher": { + "name": "openocd", + "uid": "E6633861A3978538", + "args": "-f interface/cmsis-dap.cfg -f target/rp2350.cfg -c \"adapter speed 5000\"" + } }, { "name": "stm32f072disco", "uid": "3A001A001357364230353532", - "flasher": "jlink", - "flasher_sn": "779541626", - "flasher_args": "-device stm32f072rb" + "name": "jlink", + "flasher": { + "uid": "779541626", + "args": "-device stm32f072rb" + } }, { "name": "stm32f723disco", @@ -116,9 +136,11 @@ "device": true, "host": true, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2003414"}] }, - "flasher": "jlink", - "flasher_sn": "000776606156", - "flasher_args": "-device stm32f723ie" + "flasher": { + "name": "jlink", + "uid": "000776606156", + "args": "-device stm32f723ie" + } }, { "name": "stm32h743nucleo", @@ -129,9 +151,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "stlink", - "flasher_sn": "004C00343137510F39383538", - "flasher_args": "" + "flasher": { + "name": "stlink", + "uid": "004C00343137510F39383538", + "args": "" + } }, { "name": "stm32g0b1nucleo", @@ -139,9 +163,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "openocd", - "flasher_sn": "066FFF495087534867063844", - "flasher_args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + "flasher": { + "name": "openocd", + "uid": "066FFF495087534867063844", + "args": "-f interface/stlink.cfg -f target/stm32g0x.cfg" + } } ], "boards-skip": [ @@ -154,9 +180,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000778170924", - "flasher_args": "-device stm32f769ni" + "flasher": { + "name": "jlink", + "uid": "000778170924", + "args": "-device stm32f769ni" + } }, { "name": "mimxrt1015_evk", @@ -164,9 +192,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000726284213", - "flasher_args": "-device MIMXRT1015DAF5A" + "flasher": { + "name": "jlink", + "uid": "000726284213", + "args": "-device MIMXRT1015DAF5A" + } }, { "name": "nanoch32v203", @@ -174,9 +204,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "openocd_wch", - "flasher_sn": "EBCA8F0670AF", - "flasher_args": "" + "flasher": { + "name": "openocd_wch", + "uid": "EBCA8F0670AF", + "args": "" + } }, { "name": "stm32f407disco", @@ -184,9 +216,11 @@ "tests": { "device": true, "host": false, "dual": false }, - "flasher": "jlink", - "flasher_sn": "000773661813", - "flasher_args": "-device stm32f407vg" + "flasher": { + "name": "jlink", + "uid": "000773661813", + "args": "-device stm32f407vg" + } } ] } -- cgit v1.3.1 From 6776c7171e3176026faadea4a721fd96bc1e41f2 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 15:06:39 +0700 Subject: fix hil set matrix --- test/hil/hil_ci_set_matrix.py | 3 ++- test/hil/tinyusb.json | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/hil_ci_set_matrix.py b/test/hil/hil_ci_set_matrix.py index 192174e16..67ce2abb8 100644 --- a/test/hil/hil_ci_set_matrix.py +++ b/test/hil/hil_ci_set_matrix.py @@ -22,7 +22,8 @@ def main(): } for board in config['boards']: name = board['name'] - if board['flasher'] == 'esptool': + flasher = board['flasher'] + if flasher['name'] == 'esptool': toolchain = 'esp-idf' else: toolchain = 'arm-gcc' diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 4d450cc5a..32f4a06de 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -120,8 +120,8 @@ { "name": "stm32f072disco", "uid": "3A001A001357364230353532", - "name": "jlink", "flasher": { + "name": "jlink", "uid": "779541626", "args": "-device stm32f072rb" } -- cgit v1.3.1 From 3ee3658dad4bd44be325ee18229dfc62a2ffa057 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 13 Nov 2024 17:01:54 +0700 Subject: skip max3421e metro m4 for now, due to cdc output too fast. --- test/hil/hil_test.py | 2 +- test/hil/tinyusb.json | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 9d6078ba0..daa9868d9 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -517,7 +517,7 @@ def test_board(board): flasher = board['flasher'] # default to all tests - test_list = list(device_tests) + test_list = [] if 'tests' in board: board_tests = board['tests'] diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 32f4a06de..c15daf1d9 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -56,7 +56,7 @@ "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", "tests": { - "device": true, "host": false, "dual": true, + "device": true, "host": false, "dual": false, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] }, "flasher": { -- cgit v1.3.1 From daef846aa73dc2b8edf5e072832833a6ae68b42a Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 14 Nov 2024 13:26:11 +0700 Subject: rename CFG_TUD_DWC2_DMA to CFG_TUD_DWC2_DMA_ENABLE --- src/common/tusb_mcu.h | 2 +- src/portable/synopsys/dwc2/dcd_dwc2.c | 4 +--- src/tusb_option.h | 4 ++-- test/hil/tinyusb.json | 8 ++++---- 4 files changed, 8 insertions(+), 10 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 41f552d33..0a039eadf 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -538,7 +538,7 @@ #define TUP_DCD_EDPT_ISO_ALLOC #endif -#if defined(TUP_USBIP_DWC2) // && CFG_TUD_DWC2_DMA == 0 +#if defined(TUP_USBIP_DWC2) // && CFG_TUD_DWC2_DMA_ENABLE == 0 #define TUP_MEM_CONST_ADDR #endif diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index fe67de8dc..80287305a 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -71,7 +71,7 @@ static bool _sof_en; TU_ATTR_ALWAYS_INLINE static inline bool dma_device_enabled(const dwc2_regs_t* dwc2) { (void) dwc2; // Internal DMA only - return CFG_TUD_DWC2_DMA && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; + return CFG_TUD_DWC2_DMA_ENABLE && dwc2->ghwcfg2_bm.arch == GHWCFG2_ARCH_INTERNAL_DMA; } static void dma_setup_prepare(uint8_t rhport) { @@ -897,8 +897,6 @@ static void handle_epin_irq(uint8_t rhport) { Note: when OTG_MULTI_PROC_INTRPT = 1, Device Each endpoint interrupt deachint/deachmsk/diepeachmsk/doepeachmsk are combined to generate dedicated interrupt line for each endpoint. */ - - void dcd_int_handler(uint8_t rhport) { dwc2_regs_t* dwc2 = DWC2_REG(rhport); diff --git a/src/tusb_option.h b/src/tusb_option.h index e9b6a5806..6257a87ba 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -252,8 +252,8 @@ // (defined by CFG_TUSB_MEM_SECTION) must be declared as non-cacheable. // For example, on Cortex-M7 the MPU region can be configured as normal // non-cacheable, with RASR register value: TEX=1 C=0 B=0 S=0. -#ifndef CFG_TUD_DWC2_DMA - #define CFG_TUD_DWC2_DMA 0 +#ifndef CFG_TUD_DWC2_DMA_ENABLE + #define CFG_TUD_DWC2_DMA_ENABLE 0 #endif // Enable DWC2 Slave mode for host diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index c15daf1d9..b6c9b540a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -17,7 +17,7 @@ "name": "espressif_s3_devkitm", "uid": "84F703C084E4", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] @@ -130,7 +130,7 @@ "name": "stm32f723disco", "uid": "460029001951373031313335", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": true, "dual": false, @@ -146,7 +146,7 @@ "name": "stm32h743nucleo", "uid": "110018000951383432343236", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": false, "dual": false @@ -175,7 +175,7 @@ "name": "stm32f769disco", "uid": "21002F000F51363531383437", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": false, "dual": false -- cgit v1.3.1 From fa523a5682d8dc91cc1c7a63475623743e37ac83 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 21 Nov 2024 10:15:30 +0700 Subject: make sure usb buffer occupies whole cache line when DCACHE is enabled for msc,cdc,hid HIL enable device DMA for p4 --- .../boards/espressif_p4_function_ev/board.h | 4 +- src/class/cdc/cdc_device.c | 10 +- src/class/hid/hid_device.c | 15 ++- src/class/msc/msc_device.c | 125 +++++++++------------ src/common/tusb_common.h | 3 + src/common/tusb_compiler.h | 5 +- src/device/usbd_control.c | 29 ++--- src/portable/synopsys/dwc2/dcd_dwc2.c | 8 +- src/tusb_option.h | 6 +- test/hil/tinyusb.json | 3 + 10 files changed, 105 insertions(+), 103 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h index 0022f0d2d..c4f73c72e 100644 --- a/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h +++ b/hw/bsp/espressif/boards/espressif_p4_function_ev/board.h @@ -8,7 +8,7 @@ * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: + * furnished to do so, subject to the following conditions:aaaaa * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. @@ -33,7 +33,7 @@ // #define NEOPIXEL_PIN 48 -#define BUTTON_PIN 0 +#define BUTTON_PIN 35 #define BUTTON_STATE_ACTIVE 0 // For CI hardware test, to test both device and host on the same HS port with help of diff --git a/src/class/cdc/cdc_device.c b/src/class/cdc/cdc_device.c index ebc408f5a..3e856383e 100644 --- a/src/class/cdc/cdc_device.c +++ b/src/class/cdc/cdc_device.c @@ -69,8 +69,14 @@ typedef struct { OSAL_MUTEX_DEF(tx_ff_mutex); // Endpoint Transfer buffer - CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_CDC_EP_BUFSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_CDC_EP_BUFSIZE]; + union { + CFG_TUD_MEM_ALIGN uint8_t epout_buf[CFG_TUD_CDC_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t epin_buf[CFG_TUD_CDC_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; } cdcd_interface_t; #define ITF_MEM_RESET_SIZE offsetof(cdcd_interface_t, wanted_char) diff --git a/src/class/hid/hid_device.c b/src/class/hid/hid_device.c index ef6c7f3af..257af86e0 100644 --- a/src/class/hid/hid_device.c +++ b/src/class/hid/hid_device.c @@ -53,9 +53,18 @@ typedef struct { // Note: HID descriptor may be not available from application after enumeration tusb_hid_descriptor_hid_t const *hid_descriptor; - uint8_t ctrl_buf[CFG_TUD_HID_EP_BUFSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epin_buf[CFG_TUD_HID_EP_BUFSIZE]; - CFG_TUSB_MEM_ALIGN uint8_t epout_buf[CFG_TUD_HID_EP_BUFSIZE]; + union { + CFG_TUD_MEM_ALIGN uint8_t ctrl_buf[CFG_TUD_HID_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t epin_buf[CFG_TUD_HID_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t epout_buf[CFG_TUD_HID_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; } hidd_interface_t; CFG_TUD_MEM_SECTION tu_static hidd_interface_t _hidd_itf[CFG_TUD_HID]; diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 447560b4d..af035bcf3 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -44,8 +44,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ +enum { MSC_STAGE_CMD = 0, MSC_STAGE_DATA, MSC_STAGE_STATUS, @@ -53,11 +52,19 @@ enum MSC_STAGE_NEED_RESET, }; -typedef struct -{ - // TODO optimize alignment - CFG_TUSB_MEM_ALIGN msc_cbw_t cbw; - CFG_TUSB_MEM_ALIGN msc_csw_t csw; +typedef struct { + union { + CFG_TUD_MEM_ALIGN msc_cbw_t cbw; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN msc_csw_t csw; + TUD_DCACHE_PADDING; + }; + union { + CFG_TUD_MEM_ALIGN uint8_t ep_buf[CFG_TUD_MSC_EP_BUFSIZE]; + TUD_DCACHE_PADDING; + }; uint8_t itf_num; uint8_t ep_in; @@ -74,8 +81,7 @@ typedef struct uint8_t add_sense_qualifier; }mscd_interface_t; -CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static mscd_interface_t _mscd_itf; -CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static uint8_t _mscd_buf[CFG_TUD_MSC_EP_BUFSIZE]; +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN static mscd_interface_t _mscd_itf; //--------------------------------------------------------------------+ // INTERNAL OBJECT & FUNCTION DECLARATION @@ -86,13 +92,11 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc); static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc); static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint32_t xferred_bytes); -TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) -{ +TU_ATTR_ALWAYS_INLINE static inline bool is_data_in(uint8_t dir) { return tu_bit_test(dir, 7); } -static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) -{ +static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) { // Data residue is always = host expect - actual transferred p_msc->csw.data_residue = p_msc->cbw.total_bytes - p_msc->xferred_len; @@ -100,14 +104,12 @@ static inline bool send_csw(uint8_t rhport, mscd_interface_t* p_msc) return usbd_edpt_xfer(rhport, p_msc->ep_in , (uint8_t*) &p_msc->csw, sizeof(msc_csw_t)); } -static inline bool prepare_cbw(uint8_t rhport, mscd_interface_t* p_msc) -{ +static inline bool prepare_cbw(uint8_t rhport, mscd_interface_t* p_msc) { p_msc->stage = MSC_STAGE_CMD; return usbd_edpt_xfer(rhport, p_msc->ep_out, (uint8_t*) &p_msc->cbw, sizeof(msc_cbw_t)); } -static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status) -{ +static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status) { msc_cbw_t const * p_cbw = &p_msc->cbw; msc_csw_t * p_csw = &p_msc->csw; @@ -116,24 +118,21 @@ static void fail_scsi_op(uint8_t rhport, mscd_interface_t* p_msc, uint8_t status p_msc->stage = MSC_STAGE_STATUS; // failed but sense key is not set: default to Illegal Request - if ( p_msc->sense_key == 0 ) tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + if (p_msc->sense_key == 0) { + tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + } // If there is data stage and not yet complete, stall it - if ( p_cbw->total_bytes && p_csw->data_residue ) - { - if ( is_data_in(p_cbw->dir) ) - { + if (p_cbw->total_bytes && p_csw->data_residue) { + if (is_data_in(p_cbw->dir)) { usbd_edpt_stall(rhport, p_msc->ep_in); - } - else - { + } else { usbd_edpt_stall(rhport, p_msc->ep_out); } } } -static inline uint32_t rdwr10_get_lba(uint8_t const command[]) -{ +static inline uint32_t rdwr10_get_lba(uint8_t const command[]) { // use offsetof to avoid pointer to the odd/unaligned address uint32_t const lba = tu_unaligned_read32(command + offsetof(scsi_write10_t, lba)); @@ -141,14 +140,12 @@ static inline uint32_t rdwr10_get_lba(uint8_t const command[]) return tu_ntohl(lba); } -static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) -{ +static inline uint16_t rdwr10_get_blockcount(msc_cbw_t const* cbw) { uint16_t const block_count = tu_unaligned_read16(cbw->command + offsetof(scsi_write10_t, block_count)); return tu_ntohs(block_count); } -static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) -{ +static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { // first extract block count in the command uint16_t const block_count = rdwr10_get_blockcount(cbw); @@ -158,40 +155,28 @@ static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) return (uint16_t) (cbw->total_bytes / block_count); } -uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) -{ +uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint8_t status = MSC_CSW_STATUS_PASSED; uint16_t const block_count = rdwr10_get_blockcount(cbw); - if ( cbw->total_bytes == 0 ) - { - if ( block_count ) - { + if (cbw->total_bytes == 0) { + if (block_count) { TU_LOG_DRV(" SCSI case 2 (Hn < Di) or case 3 (Hn < Do) \r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; - }else - { + } else { // no data transfer, only exist in complaint test suite } - }else - { - if ( SCSI_CMD_READ_10 == cbw->command[0] && !is_data_in(cbw->dir) ) - { + } else { + if (SCSI_CMD_READ_10 == cbw->command[0] && !is_data_in(cbw->dir)) { TU_LOG_DRV(" SCSI case 10 (Ho <> Di)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; - } - else if ( SCSI_CMD_WRITE_10 == cbw->command[0] && is_data_in(cbw->dir) ) - { + } else if (SCSI_CMD_WRITE_10 == cbw->command[0] && is_data_in(cbw->dir)) { TU_LOG_DRV(" SCSI case 8 (Hi <> Do)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; - } - else if ( 0 == block_count ) - { + } else if (0 == block_count) { TU_LOG_DRV(" SCSI case 4 Hi > Dn (READ10) or case 9 Ho > Dn (WRITE10) \r\n"); - status = MSC_CSW_STATUS_FAILED; - } - else if ( cbw->total_bytes / block_count == 0 ) - { + status = MSC_CSW_STATUS_FAILED; + } else if (cbw->total_bytes / block_count == 0) { TU_LOG_DRV(" Computed block size = 0. SCSI case 7 Hi < Di (READ10) or case 13 Ho < Do (WRIT10)\r\n"); status = MSC_CSW_STATUS_PHASE_ERROR; } @@ -205,8 +190,7 @@ uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) //--------------------------------------------------------------------+ #if CFG_TUSB_DEBUG >= CFG_TUD_MSC_LOG_LEVEL -TU_ATTR_UNUSED tu_static tu_lookup_entry_t const _msc_scsi_cmd_lookup[] = -{ +TU_ATTR_UNUSED tu_static tu_lookup_entry_t const _msc_scsi_cmd_lookup[] = { { .key = SCSI_CMD_TEST_UNIT_READY , .data = "Test Unit Ready" }, { .key = SCSI_CMD_INQUIRY , .data = "Inquiry" }, { .key = SCSI_CMD_MODE_SELECT_6 , .data = "Mode_Select 6" }, @@ -220,8 +204,7 @@ TU_ATTR_UNUSED tu_static tu_lookup_entry_t const _msc_scsi_cmd_lookup[] = { .key = SCSI_CMD_WRITE_10 , .data = "Write10" } }; -TU_ATTR_UNUSED tu_static tu_lookup_table_t const _msc_scsi_cmd_table = -{ +TU_ATTR_UNUSED tu_static tu_lookup_table_t const _msc_scsi_cmd_table = { .count = TU_ARRAY_SIZE(_msc_scsi_cmd_lookup), .items = _msc_scsi_cmd_lookup }; @@ -462,7 +445,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // 2. IN & Zero: Process if is built-in, else Invoke app callback. Skip DATA if zero length if ( (p_cbw->total_bytes > 0 ) && !is_data_in(p_cbw->dir) ) { - if (p_cbw->total_bytes > sizeof(_mscd_buf)) + if (p_cbw->total_bytes > CFG_TUD_MSC_EP_BUFSIZE) { TU_LOG_DRV(" SCSI reject non READ10/WRITE10 with large data\r\n"); fail_scsi_op(rhport, p_msc, MSC_CSW_STATUS_FAILED); @@ -470,17 +453,17 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { // Didn't check for case 9 (Ho > Dn), which requires examining scsi command first // but it is OK to just receive data then responded with failed status - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_buf, (uint16_t) p_msc->total_len) ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, p_msc->ep_buf, (uint16_t) p_msc->total_len) ); } }else { // First process if it is a built-in commands - int32_t resplen = proc_builtin_scsi(p_cbw->lun, p_cbw->command, _mscd_buf, sizeof(_mscd_buf)); + int32_t resplen = proc_builtin_scsi(p_cbw->lun, p_cbw->command, p_msc->ep_buf, CFG_TUD_MSC_EP_BUFSIZE); // Invoke user callback if not built-in if ( (resplen < 0) && (p_msc->sense_key == 0) ) { - resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, (uint16_t) p_msc->total_len); + resplen = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, p_msc->ep_buf, (uint16_t) p_msc->total_len); } if ( resplen < 0 ) @@ -513,7 +496,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t { // cannot return more than host expect p_msc->total_len = tu_min32((uint32_t) resplen, p_cbw->total_bytes); - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, (uint16_t) p_msc->total_len) ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, p_msc->ep_buf, (uint16_t) p_msc->total_len) ); } } } @@ -522,7 +505,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t case MSC_STAGE_DATA: TU_LOG_DRV(" SCSI Data [Lun%u]\r\n", p_cbw->lun); - //TU_LOG_MEM(MSC_DEBUG, _mscd_buf, xferred_bytes, 2); + //TU_LOG_MEM(MSC_DEBUG, p_msc->ep_buf, xferred_bytes, 2); if (SCSI_CMD_READ_10 == p_cbw->command[0]) { @@ -548,7 +531,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t // OUT transfer, invoke callback if needed if ( !is_data_in(p_cbw->dir) ) { - int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, _mscd_buf, (uint16_t) p_msc->total_len); + int32_t cb_result = tud_msc_scsi_cb(p_cbw->lun, p_cbw->command, p_msc->ep_buf, (uint16_t) p_msc->total_len); if ( cb_result < 0 ) { @@ -861,11 +844,11 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) uint32_t const lba = rdwr10_get_lba(p_cbw->command) + (p_msc->xferred_len / block_sz); // remaining bytes capped at class buffer - int32_t nbytes = (int32_t) tu_min32(sizeof(_mscd_buf), p_cbw->total_bytes-p_msc->xferred_len); + int32_t nbytes = (int32_t) tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes-p_msc->xferred_len); // Application can consume smaller bytes uint32_t const offset = p_msc->xferred_len % block_sz; - nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, _mscd_buf, (uint32_t) nbytes); + nbytes = tud_msc_read10_cb(p_cbw->lun, lba, offset, p_msc->ep_buf, (uint32_t) nbytes); if ( nbytes < 0 ) { @@ -884,7 +867,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) } else { - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, _mscd_buf, (uint16_t) nbytes), ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_in, p_msc->ep_buf, (uint16_t) nbytes), ); } } @@ -908,10 +891,10 @@ static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc) } // remaining bytes capped at class buffer - uint16_t nbytes = (uint16_t) tu_min32(sizeof(_mscd_buf), p_cbw->total_bytes-p_msc->xferred_len); + uint16_t nbytes = (uint16_t) tu_min32(CFG_TUD_MSC_EP_BUFSIZE, p_cbw->total_bytes-p_msc->xferred_len); // Write10 callback will be called later when usb transfer complete - TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, _mscd_buf, nbytes), ); + TU_ASSERT( usbd_edpt_xfer(rhport, p_msc->ep_out, p_msc->ep_buf, nbytes), ); } // process new data arrived from WRITE10 @@ -927,7 +910,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 // Invoke callback to consume new data uint32_t const offset = p_msc->xferred_len % block_sz; - int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, _mscd_buf, xferred_bytes); + int32_t nbytes = tud_msc_write10_cb(p_cbw->lun, lba, offset, p_msc->ep_buf, xferred_bytes); if ( nbytes < 0 ) { @@ -950,7 +933,7 @@ static void proc_write10_new_data(uint8_t rhport, mscd_interface_t* p_msc, uint3 if ( nbytes > 0 ) { p_msc->xferred_len += (uint16_t) nbytes; - memmove(_mscd_buf, _mscd_buf+nbytes, left_over); + memmove(p_msc->ep_buf, p_msc->ep_buf+nbytes, left_over); } // simulate an transfer complete with adjusted parameters --> callback will be invoked with adjusted parameter diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index 59cc0fb48..416bad296 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -58,6 +58,9 @@ // Generate a mask with bit from high (31) to low (0) set, e.g TU_GENMASK(3, 0) = 0b1111 #define TU_GENMASK(h, l) ( (UINT32_MAX << (l)) & (UINT32_MAX >> (31 - (h))) ) +// DCache padding for variable to occupy full cache line +#define TUD_DCACHE_PADDING uint8_t TU_XSTRCAT(dcache_padding_, _TU_COUNTER_)[CFG_TUD_MEM_DCACHE_ENABLE ? CFG_TUD_MEM_DCACHE_LINE_SIZE : 1] + //--------------------------------------------------------------------+ // Includes //--------------------------------------------------------------------+ diff --git a/src/common/tusb_compiler.h b/src/common/tusb_compiler.h index 646c22b29..9b33a6f61 100644 --- a/src/common/tusb_compiler.h +++ b/src/common/tusb_compiler.h @@ -136,7 +136,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) - // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f))) #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #endif @@ -189,6 +189,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f))) #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #define TU_ATTR_DEPRECATED(mess) __attribute__ ((deprecated(mess))) // warn if function with this attribute is used #define TU_ATTR_UNUSED __attribute__ ((unused)) // Function/Variable is meant to be possibly unused @@ -216,6 +217,7 @@ #define TU_ATTR_SECTION(sec_name) __attribute__ ((section(#sec_name))) #define TU_ATTR_PACKED __attribute__ ((packed)) #define TU_ATTR_WEAK __attribute__ ((weak)) + // #define TU_ATTR_WEAK_ALIAS(f) __attribute__ ((weak, alias(#f))) #ifndef TU_ATTR_ALWAYS_INLINE // allow to override for debug #define TU_ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) #endif @@ -244,6 +246,7 @@ #define TU_ATTR_SECTION(sec_name) #define TU_ATTR_PACKED #define TU_ATTR_WEAK + // #define TU_ATTR_WEAK_ALIAS(f) #define TU_ATTR_ALWAYS_INLINE #define TU_ATTR_DEPRECATED(mess) #define TU_ATTR_UNUSED diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c index b1fd357aa..59c66eb1e 100644 --- a/src/device/usbd_control.c +++ b/src/device/usbd_control.c @@ -54,6 +54,10 @@ enum { }; typedef struct { + union { + CFG_TUD_MEM_ALIGN uint8_t ep_buf[CFG_TUD_ENDPOINT0_SIZE]; + TUD_DCACHE_PADDING; + }; tusb_control_request_t request; uint8_t* buffer; uint16_t data_len; @@ -61,17 +65,14 @@ typedef struct { usbd_control_xfer_cb_t complete_cb; } usbd_control_xfer_t; -tu_static usbd_control_xfer_t _ctrl_xfer; - -CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN -tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE]; +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN static usbd_control_xfer_t _ctrl_xfer; //--------------------------------------------------------------------+ // Application API //--------------------------------------------------------------------+ // Queue ZLP status transaction -static inline bool _status_stage_xact(uint8_t rhport, tusb_control_request_t const* request) { +static inline bool status_stage_xact(uint8_t rhport, tusb_control_request_t const* request) { // Opposite to endpoint in Data Phase uint8_t const ep_addr = request->bmRequestType_bit.direction ? EDPT_CTRL_OUT : EDPT_CTRL_IN; return usbd_edpt_xfer(rhport, ep_addr, NULL, 0); @@ -84,13 +85,13 @@ bool tud_control_status(uint8_t rhport, tusb_control_request_t const* request) { _ctrl_xfer.total_xferred = 0; _ctrl_xfer.data_len = 0; - return _status_stage_xact(rhport, request); + return status_stage_xact(rhport, request); } // Queue a transaction in Data Stage // Each transaction has up to Endpoint0's max packet size. // This function can also transfer an zero-length packet -static bool _data_stage_xact(uint8_t rhport) { +static bool data_stage_xact(uint8_t rhport) { uint16_t const xact_len = tu_min16(_ctrl_xfer.data_len - _ctrl_xfer.total_xferred, CFG_TUD_ENDPOINT0_SIZE); @@ -99,11 +100,11 @@ static bool _data_stage_xact(uint8_t rhport) { if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN) { ep_addr = EDPT_CTRL_IN; if (xact_len) { - TU_VERIFY(0 == tu_memcpy_s(_usbd_ctrl_buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len)); + TU_VERIFY(0 == tu_memcpy_s(_ctrl_xfer.ep_buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len)); } } - return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _usbd_ctrl_buf : NULL, xact_len); + return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _ctrl_xfer.ep_buf : NULL, xact_len); } // Transmit data to/from the control endpoint. @@ -122,10 +123,10 @@ bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const* request, voi // TU_LOG2(" Control total data length is %u bytes\r\n", _ctrl_xfer.data_len); // Data stage - TU_ASSERT(_data_stage_xact(rhport)); + TU_ASSERT(data_stage_xact(rhport)); } else { // Status stage - TU_ASSERT(_status_stage_xact(rhport, request)); + TU_ASSERT(status_stage_xact(rhport, request)); } return true; @@ -179,7 +180,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_OUT) { TU_VERIFY(_ctrl_xfer.buffer); - memcpy(_ctrl_xfer.buffer, _usbd_ctrl_buf, xferred_bytes); + memcpy(_ctrl_xfer.buffer, _ctrl_xfer.ep_buf, xferred_bytes); TU_LOG_MEM(CFG_TUD_LOG_LEVEL, _usbd_ctrl_buf, xferred_bytes, 2); } @@ -205,7 +206,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, if (is_ok) { // Send status - TU_ASSERT(_status_stage_xact(rhport, &_ctrl_xfer.request)); + TU_ASSERT(status_stage_xact(rhport, &_ctrl_xfer.request)); } else { // Stall both IN and OUT control endpoint dcd_edpt_stall(rhport, EDPT_CTRL_OUT); @@ -213,7 +214,7 @@ bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, } } else { // More data to transfer - TU_ASSERT(_data_stage_xact(rhport)); + TU_ASSERT(data_stage_xact(rhport)); } return true; diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index 363c77761..f2eb80e12 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -58,11 +58,9 @@ static xfer_ctl_t xfer_status[DWC2_EP_MAX][2]; #define XFER_CTL_BASE(_ep, _dir) (&xfer_status[_ep][_dir]) typedef struct { - CFG_TUD_MEM_ALIGN union { - uint32_t setup_packet[2]; -#if CFG_TUD_MEM_DCACHE_ENABLE - uint8_t setup_packet_cache_padding[CFG_TUD_MEM_DCACHE_LINE_SIZE]; -#endif + union { + CFG_TUD_MEM_ALIGN uint32_t setup_packet[2]; + TUD_DCACHE_PADDING; }; // EP0 transfers are limited to 1 packet - larger sizes has to be split diff --git a/src/tusb_option.h b/src/tusb_option.h index 500d74903..1c8e8aff4 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -252,11 +252,7 @@ #define CFG_TUD_DWC2_SLAVE_ENABLE 1 #endif -// DWC2 controller: use DMA for data transfer -// For processors with data cache enabled, USB endpoint buffer region -// (defined by CFG_TUSB_MEM_SECTION) must be declared as non-cacheable. -// For example, on Cortex-M7 the MPU region can be configured as normal -// non-cacheable, with RASR register value: TEX=1 C=0 B=0 S=0. +// Enable DWC2 DMA for device #ifndef CFG_TUD_DWC2_DMA_ENABLE #define CFG_TUD_DWC2_DMA_ENABLE 0 #endif diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index b6c9b540a..8b4ef6d3a 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -3,6 +3,9 @@ { "name": "espressif_p4_function_ev", "uid": "6055F9F98715", + "build" : { + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002427"}] -- cgit v1.3.1 From 63771086d9beddb9f1b08792dccddbb17daa5ef7 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Nov 2024 00:22:56 +0700 Subject: enable dwc2 dma for hil test for esp32s3/p4 and stm32 --- test/hil/tinyusb.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 8b4ef6d3a..580481b61 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -4,7 +4,7 @@ "name": "espressif_p4_function_ev", "uid": "6055F9F98715", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos", "host/device_info"], @@ -20,7 +20,7 @@ "name": "espressif_s3_devkitm", "uid": "84F703C084E4", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] @@ -133,7 +133,7 @@ "name": "stm32f723disco", "uid": "460029001951373031313335", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": true, "dual": false, -- cgit v1.3.1 From 453d69517b8f7f019ac855531e9e433d9d158f37 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Nov 2024 11:10:06 +0700 Subject: fix multiple flag on compiling --- hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt | 1 + hw/bsp/family_support.cmake | 2 ++ hw/bsp/rp2040/family.cmake | 1 + src/class/msc/msc_device.c | 2 +- test/hil/tinyusb.json | 10 ++++++---- 5 files changed, 11 insertions(+), 5 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt index 95fb2e440..00e288bad 100644 --- a/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt +++ b/hw/bsp/espressif/components/tinyusb_src/CMakeLists.txt @@ -69,6 +69,7 @@ if (DEFINED LOG) endif() if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) list(APPEND compile_definitions ${CFLAGS_CLI}) endif() diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 3f2872a30..82e3badb3 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -206,6 +206,7 @@ function(family_configure_common TARGET RTOS) # compile define from command line if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) target_compile_options(${TARGET} PUBLIC ${CFLAGS_CLI}) endif() @@ -291,6 +292,7 @@ function(family_add_tinyusb TARGET OPT_MCU RTOS) # compile define from command line if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) target_compile_options(${TARGET}-tinyusb PUBLIC ${CFLAGS_CLI}) endif() diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 8f01eac74..b2b01b1cf 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -191,6 +191,7 @@ function(family_configure_target TARGET RTOS) # compile define from command line if(DEFINED CFLAGS_CLI) + separate_arguments(CFLAGS_CLI) target_compile_options(${TARGET} PUBLIC ${CFLAGS_CLI}) endif() diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index cfae646a1..dd66bfb6f 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -147,7 +147,7 @@ static inline uint16_t rdwr10_get_blocksize(msc_cbw_t const* cbw) { return (uint16_t) (cbw->total_bytes / block_count); } -uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { +static uint8_t rdwr10_validate_cmd(msc_cbw_t const* cbw) { uint8_t status = MSC_CSW_STATUS_PASSED; uint16_t const block_count = rdwr10_get_blockcount(cbw); diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 580481b61..7393226eb 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -14,13 +14,14 @@ "name": "esptool", "uid": "4ea4f48f6bc3ee11bbb9d00f9e1b1c54", "args": "-b 1500000" - } + }, + "comment": "Use TS3USB30 mux to test both device and host" }, { "name": "espressif_s3_devkitm", "uid": "84F703C084E4", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE"] }, "tests": { "only": ["device/cdc_msc_freertos", "device/hid_composite_freertos"] @@ -133,7 +134,7 @@ "name": "stm32f723disco", "uid": "460029001951373031313335", "build" : { - "flags_on": ["", "CFG_TUD_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE"] + "flags_on": ["", "CFG_TUH_DWC2_DMA_ENABLE"] }, "tests": { "device": true, "host": true, "dual": false, @@ -143,7 +144,8 @@ "name": "jlink", "uid": "000776606156", "args": "-device stm32f723ie" - } + }, + "comment": "Device port0 FS (slave only), Host port1 HS with DMA" }, { "name": "stm32h743nucleo", -- cgit v1.3.1 From e54753814befa26742fa8a9805f5b7beac32a963 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 21 Mar 2025 00:11:18 +0700 Subject: enable hil dual for metro m4 with max3421 --- examples/host/device_info/src/main.c | 2 +- src/host/usbh.h | 9 +++------ test/hil/tinyusb.json | 2 +- 3 files changed, 5 insertions(+), 8 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index 775968c16..ac4c46a11 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -81,7 +81,7 @@ void init_freertos_task(void); //-------------------------------------------------------------------- // Main //-------------------------------------------------------------------- -void init_tinyusb(void) { +static void init_tinyusb(void) { // init host stack on configured roothub port tusb_rhport_init_t host_init = { .role = TUSB_ROLE_HOST, diff --git a/src/host/usbh.h b/src/host/usbh.h index 52b4f478c..36bb7c9b2 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -155,8 +155,7 @@ bool tuh_inited(void); void tuh_task_ext(uint32_t timeout_ms, bool in_isr); // Task function should be called in main/rtos loop -TU_ATTR_ALWAYS_INLINE static inline -void tuh_task(void) { +TU_ATTR_ALWAYS_INLINE static inline void tuh_task(void) { tuh_task_ext(UINT32_MAX, false); } @@ -197,16 +196,14 @@ bool tuh_mounted(uint8_t daddr); bool tuh_connected(uint8_t daddr); // Check if device is suspended -TU_ATTR_ALWAYS_INLINE static inline -bool tuh_suspended(uint8_t daddr) { +TU_ATTR_ALWAYS_INLINE static inline bool tuh_suspended(uint8_t daddr) { // TODO implement suspend & resume on host (void) daddr; return false; } // Check if device is ready to communicate with -TU_ATTR_ALWAYS_INLINE static inline -bool tuh_ready(uint8_t daddr) { +TU_ATTR_ALWAYS_INLINE static inline bool tuh_ready(uint8_t daddr) { return tuh_mounted(daddr) && !tuh_suspended(daddr); } diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 7393226eb..c2bbdf5a3 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -60,7 +60,7 @@ "name": "metro_m4_express", "uid": "9995AD485337433231202020FF100A34", "tests": { - "device": true, "host": false, "dual": false, + "device": true, "host": false, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002130"}] }, "flasher": { -- cgit v1.3.1 From 875e645b324082a00072a45ae64a8fcdace7303a Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Mar 2025 23:20:54 +0700 Subject: update hil test to include dual and host for pico/pico2 --- examples/dual/host_info_to_device_cdc/src/main.c | 121 ++++++++++++----------- test/hil/hil_test.py | 22 +++-- test/hil/tinyusb.json | 4 +- 3 files changed, 79 insertions(+), 68 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index 668808db2..c1017141c 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -70,8 +70,11 @@ enum { static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; static bool is_print[CFG_TUH_DEVICE_MAX+1] = { 0 }; +static tusb_desc_device_t descriptor_device[CFG_TUH_DEVICE_MAX+1]; static void print_utf16(uint16_t *temp_buf, size_t buf_len); +static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device); + void led_blinking_task(void); void cdc_task(void); @@ -135,33 +138,51 @@ void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } -#if 1 +void cdc_task(void) { + if (!tud_cdc_connected()) { + // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. + // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop + board_delay(10); + return; + } + + for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { + if (tuh_mounted(daddr)) { + if (is_print[daddr]) { + is_print[daddr] = false; + print_device_info(daddr, &descriptor_device[daddr]); + } + } + } +} + +//--------------------------------------------------------------------+ +// Host Get device information +//--------------------------------------------------------------------+ #define cdc_printf(...) \ do { \ char _tempbuf[256]; \ - int count = sprintf(_tempbuf, __VA_ARGS__); \ - tud_cdc_write(_tempbuf, (uint32_t) count); \ - tud_cdc_write_flush(); \ - tud_task(); \ + char* _bufptr = _tempbuf; \ + uint32_t count = (uint32_t) sprintf(_tempbuf, __VA_ARGS__); \ + while (count > 0) { \ + uint32_t wr_count = tud_cdc_write(_bufptr, count); \ + count -= wr_count; \ + _bufptr += wr_count; \ + if (count > 0){ \ + tud_task();\ + tud_cdc_write_flush(); \ + } \ + } \ } while(0) -#endif - -//#define cdc_printf printf - -void print_device_info(uint8_t daddr) { - tusb_desc_device_t desc_device; - uint8_t xfer_result = tuh_descriptor_get_device_sync(daddr, &desc_device, 18); - if (XFER_RESULT_SUCCESS != xfer_result) { - tud_cdc_write_str("Failed to get device descriptor\r\n"); - return; - } +static void print_device_info(uint8_t daddr, const tusb_desc_device_t* desc_device) { // Get String descriptor using Sync API uint16_t serial[64]; uint16_t buf[128]; + (void) buf; - cdc_printf("Device %u: ID %04x:%04x SN ", daddr, desc_device.idVendor, desc_device.idProduct); - xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); + cdc_printf("Device %u: ID %04x:%04x SN ", daddr, desc_device->idVendor, desc_device->idProduct); + uint8_t xfer_result = tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, serial, sizeof(serial)); if (XFER_RESULT_SUCCESS != xfer_result) { serial[0] = 'n'; serial[1] = '/'; @@ -169,58 +190,46 @@ void print_device_info(uint8_t daddr) { serial[3] = 0; } print_utf16(serial, TU_ARRAY_SIZE(serial)); - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); cdc_printf("Device Descriptor:\r\n"); - cdc_printf(" bLength %u\r\n" , desc_device.bLength); - cdc_printf(" bDescriptorType %u\r\n" , desc_device.bDescriptorType); - cdc_printf(" bcdUSB %04x\r\n" , desc_device.bcdUSB); - cdc_printf(" bDeviceClass %u\r\n" , desc_device.bDeviceClass); - cdc_printf(" bDeviceSubClass %u\r\n" , desc_device.bDeviceSubClass); - cdc_printf(" bDeviceProtocol %u\r\n" , desc_device.bDeviceProtocol); - cdc_printf(" bMaxPacketSize0 %u\r\n" , desc_device.bMaxPacketSize0); - cdc_printf(" idVendor 0x%04x\r\n" , desc_device.idVendor); - cdc_printf(" idProduct 0x%04x\r\n" , desc_device.idProduct); - cdc_printf(" bcdDevice %04x\r\n" , desc_device.bcdDevice); - - cdc_printf(" iManufacturer %u " , desc_device.iManufacturer); + cdc_printf(" bLength %u\r\n" , desc_device->bLength); + cdc_printf(" bDescriptorType %u\r\n" , desc_device->bDescriptorType); + cdc_printf(" bcdUSB %04x\r\n" , desc_device->bcdUSB); + cdc_printf(" bDeviceClass %u\r\n" , desc_device->bDeviceClass); + cdc_printf(" bDeviceSubClass %u\r\n" , desc_device->bDeviceSubClass); + cdc_printf(" bDeviceProtocol %u\r\n" , desc_device->bDeviceProtocol); + cdc_printf(" bMaxPacketSize0 %u\r\n" , desc_device->bMaxPacketSize0); + cdc_printf(" idVendor 0x%04x\r\n" , desc_device->idVendor); + cdc_printf(" idProduct 0x%04x\r\n" , desc_device->idProduct); + cdc_printf(" bcdDevice %04x\r\n" , desc_device->bcdDevice); + + cdc_printf(" iManufacturer %u " , desc_device->iManufacturer); xfer_result = tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); - if (XFER_RESULT_SUCCESS == xfer_result ) { + if (XFER_RESULT_SUCCESS == xfer_result) { print_utf16(buf, TU_ARRAY_SIZE(buf)); } - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); - cdc_printf(" iProduct %u " , desc_device.iProduct); + cdc_printf(" iProduct %u " , desc_device->iProduct); xfer_result = tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, buf, sizeof(buf)); if (XFER_RESULT_SUCCESS == xfer_result) { print_utf16(buf, TU_ARRAY_SIZE(buf)); } - tud_cdc_write_str("\r\n"); + cdc_printf("\r\n"); - cdc_printf(" iSerialNumber %u " , desc_device.iSerialNumber); - tud_cdc_write_str((char*)serial); // serial is already to UTF-8 - tud_cdc_write_str("\r\n"); + cdc_printf(" iSerialNumber %u " , desc_device->iSerialNumber); + cdc_printf((char*)serial); // serial is already to UTF-8 + cdc_printf("\r\n"); - cdc_printf(" bNumConfigurations %u\r\n" , desc_device.bNumConfigurations); + cdc_printf(" bNumConfigurations %u\r\n" , desc_device->bNumConfigurations); } -void cdc_task(void) { - if (tud_cdc_connected()) { - for (uint8_t daddr = 1; daddr <= CFG_TUH_DEVICE_MAX; daddr++) { - if (tuh_mounted(daddr)) { - if (is_print[daddr]) { - is_print[daddr] = false; - print_device_info(daddr); - tud_cdc_write_flush(); - } - } - } - } +void tuh_enum_descriptor_device_cb(uint8_t daddr, tusb_desc_device_t const* desc_device) { + (void) daddr; + descriptor_device[daddr] = *desc_device; // save device descriptor } -//--------------------------------------------------------------------+ -// Host Get device information -//--------------------------------------------------------------------+ void tuh_mount_cb(uint8_t daddr) { printf("mounted device %u\r\n", daddr); is_print[daddr] = true; @@ -296,7 +305,5 @@ static void print_utf16(uint16_t *temp_buf, size_t buf_len) { _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len); ((uint8_t*) temp_buf)[utf8_len] = '\0'; - tud_cdc_write(temp_buf, utf8_len); - tud_cdc_write_flush(); - tud_task(); + cdc_printf((char*) temp_buf); } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index a9f5dc1e1..11b67082c 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -81,7 +81,7 @@ def get_serial_dev(id, vendor_str, product_str, ifnum): return f'/dev/serial/by-id/usb-{vendor_str}_{product_str}_{id}-if{ifnum:02d}' else: # just use id: mostly for cp210x/ftdi flasher - pattern = f'/dev/serial/by-id/usb-*_{id}-if{ifnum:02d}*' + pattern = f'/dev/serial/by-id/usb-*_{id}-if*' port_list = glob.glob(pattern) return port_list[0] @@ -98,18 +98,19 @@ def get_hid_dev(id, vendor_str, product_str, event): def open_serial_dev(port): timeout = ENUM_TIMEOUT ser = None + t_step = 0.1 while timeout: if os.path.exists(port): try: # slight delay since kernel may occupy the port briefly - time.sleep(0.5) - timeout = timeout - 0.5 + time.sleep(t_step) + timeout = timeout - t_step ser = serial.Serial(port, baudrate=115200, timeout=5) break except serial.SerialException: pass - time.sleep(0.5) - timeout = timeout - 0.5 + time.sleep(t_step) + timeout = timeout - t_step assert timeout, f'Cannot open port f{port}' if os.path.exists(port) else f'Port {port} not existed' return ser @@ -202,14 +203,14 @@ def reset_stflash(board): def flash_openocd(board, firmware): flasher = board['flasher'] ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' - f'{flasher["args"]} -c init -c halt -c "program {firmware}.elf verify" -c reset -c exit') + f'{flasher["args"]} -c "init; halt; program {firmware}.elf verify; reset; exit"') return ret def reset_openocd(board): flasher = board['flasher'] ret = run_cmd(f'openocd -c "tcl_port disabled" -c "gdb_port disabled" -c "adapter serial {flasher["uid"]}" ' - f'{flasher["args"]} -c "reset exit"') + f'{flasher["args"]} -c "init; reset run; exit"') return ret @@ -310,6 +311,9 @@ def test_dual_host_info_to_device_cdc(board): assert False, 'No data from device' lines = data.decode('utf-8').splitlines() + if verbose: + print('\n'.join(lines)) + enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -577,10 +581,10 @@ def test_board(board): print(f' {e}') else: print() - print(f' Test failed: {e}, retry {i+1}') + print(f' Test failed: {e}, retry {i+2}/{max_rety}') time.sleep(1) else: - print(f'Flashing failed, retry {i+1}') + print(f'Flashing failed, retry {i+2}/{max_rety}') time.sleep(1) if ret.returncode != 0: diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index c2bbdf5a3..e702ffe9f 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -99,7 +99,7 @@ "name": "raspberry_pi_pico", "uid": "E6614C311B764A37", "tests": { - "device": true, "host": false, "dual": false, + "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] }, "flasher": { @@ -112,7 +112,7 @@ "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", "tests": { - "device": true, "host": false, "dual": false, + "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] }, "flasher": { -- cgit v1.3.1 From 1fd5c123162519a21a09c0f8030e9fbbad63cd3b Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 10:43:55 +0700 Subject: HIL: add flag CFG_TUH_RPI_PIO_USB to pico/pico2 --- test/hil/hil_test.py | 5 ++--- test/hil/tinyusb.json | 6 ++++++ 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 11b67082c..8b83731c4 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -311,9 +311,6 @@ def test_dual_host_info_to_device_cdc(board): assert False, 'No data from device' lines = data.decode('utf-8').splitlines() - if verbose: - print('\n'.join(lines)) - enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -323,6 +320,7 @@ def test_dual_host_info_to_device_cdc(board): if set(declared_devs) != set(enum_dev_sn): failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + print('\n'.join(lines)) assert False, failed_msg return 0 @@ -356,6 +354,7 @@ def test_host_device_info(board): if set(declared_devs) != set(enum_dev_sn): failed_msg = f'Expected {declared_devs}, Enumerated {enum_dev_sn}' + print('\n'.join(lines)) assert False, failed_msg return 0 diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index e702ffe9f..fb4c05c3d 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -98,6 +98,9 @@ { "name": "raspberry_pi_pico", "uid": "E6614C311B764A37", + "build" : { + "flags_on": ["CFG_TUH_RPI_PIO_USB"] + }, "tests": { "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2002470"}] @@ -111,6 +114,9 @@ { "name": "raspberry_pi_pico2", "uid": "560AE75E1C7152C9", + "build" : { + "flags_on": ["CFG_TUH_RPI_PIO_USB"] + }, "tests": { "device": true, "host": true, "dual": true, "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "533D004242"}] -- cgit v1.3.1 From b99b811308114d07cbba0d432abc185c05896ec3 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 25 Mar 2025 14:43:40 +0700 Subject: more hil improvement --- test/hil/hil_test.py | 37 +++++++++++++++++-------------------- test/hil/tinyusb.json | 4 ++-- 2 files changed, 19 insertions(+), 22 deletions(-) (limited to 'test/hil/tinyusb.json') diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 8b83731c4..017c17018 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -98,21 +98,18 @@ def get_hid_dev(id, vendor_str, product_str, event): def open_serial_dev(port): timeout = ENUM_TIMEOUT ser = None - t_step = 0.1 - while timeout: + while timeout > 0: if os.path.exists(port): try: - # slight delay since kernel may occupy the port briefly - time.sleep(t_step) - timeout = timeout - t_step ser = serial.Serial(port, baudrate=115200, timeout=5) break except serial.SerialException: + print(f'serial {port} not reaady {timeout} sec') pass - time.sleep(t_step) - timeout = timeout - t_step + time.sleep(0.1) + timeout -= 0.1 - assert timeout, f'Cannot open port f{port}' if os.path.exists(port) else f'Port {port} not existed' + assert timeout > 0, f'Cannot open port f{port}' if os.path.exists(port) else f'Port {port} not existed' return ser @@ -120,7 +117,7 @@ def read_disk_file(uid, lun, fname): # open_fs("fat://{dev}) require 'pip install pyfatfs' dev = get_disk_dev(uid, 'TinyUSB', lun) timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: if os.path.exists(dev): fat = fs.open_fs(f'fat://{dev}?read_only=true') try: @@ -133,7 +130,7 @@ def read_disk_file(uid, lun, fname): time.sleep(1) timeout -= 1 - assert timeout, f'Storage {dev} not existed' + assert timeout > 0, f'Storage {dev} not existed' return None @@ -305,11 +302,11 @@ def test_dual_host_info_to_device_cdc(board): ser = open_serial_dev(port) # read from cdc, first line should contain vid/pid and serial - data = ser.read(1000) + data = ser.read(10000) ser.close() if len(data) == 0: assert False, 'No data from device' - lines = data.decode('utf-8').splitlines() + lines = data.decode('utf-8', errors='ignore').splitlines() enum_dev_sn = [] for l in lines: @@ -339,12 +336,12 @@ def test_host_device_info(board): ret = globals()[f'reset_{flasher["name"].lower()}'](board) assert ret.returncode == 0, 'Failed to reset device' - data = ser.read(1000) + data = ser.read(10000) ser.close() if len(data) == 0: assert False, 'No data from device' - lines = data.decode('utf-8').splitlines() + lines = data.decode('utf-8', errors='ignore').splitlines() enum_dev_sn = [] for l in lines: vid_pid_sn = re.search(r'ID ([0-9a-fA-F]+):([0-9a-fA-F]+) SN (\w+)', l) @@ -422,7 +419,7 @@ def test_device_dfu(board): # Wait device enum timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: ret = run_cmd(f'dfu-util -l') stdout = ret.stdout.decode() if f'serial="{uid}"' in stdout and 'Found DFU: [cafe:4000]' in stdout: @@ -430,7 +427,7 @@ def test_device_dfu(board): time.sleep(1) timeout = timeout - 1 - assert timeout, 'Device not available' + assert timeout > 0, 'Device not available' f_dfu0 = f'dfu0_{uid}' f_dfu1 = f'dfu1_{uid}' @@ -463,7 +460,7 @@ def test_device_dfu_runtime(board): # Wait device enum timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: ret = run_cmd(f'dfu-util -l') stdout = ret.stdout.decode() if f'serial="{uid}"' in stdout and 'Found Runtime: [cafe:4000]' in stdout: @@ -471,7 +468,7 @@ def test_device_dfu_runtime(board): time.sleep(1) timeout = timeout - 1 - assert timeout, 'Device not available' + assert timeout > 0, 'Device not available' def test_device_hid_boot_interface(board): @@ -481,13 +478,13 @@ def test_device_hid_boot_interface(board): mouse2 = get_hid_dev(uid, 'TinyUSB', 'TinyUSB_Device', 'if01-mouse') # Wait device enum timeout = ENUM_TIMEOUT - while timeout: + while timeout > 0: if os.path.exists(kbd) and os.path.exists(mouse1) and os.path.exists(mouse2): break time.sleep(1) timeout = timeout - 1 - assert timeout, 'HID device not available' + assert timeout > 0, 'HID device not available' def test_device_hid_composite_freertos(id): diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index fb4c05c3d..7436ddb63 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -163,9 +163,9 @@ "device": true, "host": false, "dual": false }, "flasher": { - "name": "stlink", + "name": "openocd", "uid": "004C00343137510F39383538", - "args": "" + "args": "-f interface/stlink.cfg -f target/stm32h7x.cfg" } }, { -- cgit v1.3.1 From 69dca9518c516c48ad013ea00c11bbf1746ada9a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 26 Mar 2025 15:20:27 +0700 Subject: added mimxrt1064_evk to hil test pool --- examples/dual/host_info_to_device_cdc/src/main.c | 3 ++- test/hil/hil_test.py | 3 +++ test/hil/tinyusb.json | 13 +++++++++++++ 3 files changed, 18 insertions(+), 1 deletion(-) (limited to 'test/hil/tinyusb.json') diff --git a/examples/dual/host_info_to_device_cdc/src/main.c b/examples/dual/host_info_to_device_cdc/src/main.c index c1017141c..7e593f234 100644 --- a/examples/dual/host_info_to_device_cdc/src/main.c +++ b/examples/dual/host_info_to_device_cdc/src/main.c @@ -142,7 +142,7 @@ void cdc_task(void) { if (!tud_cdc_connected()) { // delay a bit otherwise we can outpace host's terminal. Linux will set LineState (DTR) then Line Coding. // If we send data before Linux's terminal set Line Coding, it can be ignored --> missing data with hardware test loop - board_delay(10); + board_delay(20); return; } @@ -151,6 +151,7 @@ void cdc_task(void) { if (is_print[daddr]) { is_print[daddr] = false; print_device_info(daddr, &descriptor_device[daddr]); + tud_cdc_write_flush(); } } } diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 017c17018..662bb3a1f 100755 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -561,6 +561,9 @@ def test_board(board): print('Skip (no binary)') continue + if verbose: + print(f'Flashing {fw_name}.elf') + # flash firmware. It may fail randomly, retry a few times max_rety = 2 for i in range(max_rety): diff --git a/test/hil/tinyusb.json b/test/hil/tinyusb.json index 7436ddb63..a9460bf9d 100644 --- a/test/hil/tinyusb.json +++ b/test/hil/tinyusb.json @@ -69,6 +69,19 @@ "args": "-device ATSAMD51J19" } }, + { + "name": "mimxrt1064_evk", + "uid": "BAE96FB95AFA6DBB8F00005002001200", + "tests": { + "device": true, "host": true, "dual": true, + "dev_attached": [{"vid_pid": "1a86_55d4", "serial": "52D2023299"}] + }, + "flasher": { + "name": "jlink", + "uid": "000725299165", + "args": "-device MIMXRT1064xxx6A" + } + }, { "name": "lpcxpresso11u37", "uid": "17121919", -- cgit v1.3.1